Index: trunk/l10n-kf5/zh_TW/messages/extragear-network/kdeconnect-android.po
===================================================================
--- trunk/l10n-kf5/zh_TW/messages/extragear-network/kdeconnect-android.po	(revision 1537713)
+++ trunk/l10n-kf5/zh_TW/messages/extragear-network/kdeconnect-android.po	(revision 1537714)
@@ -1,1176 +1,1176 @@
 # Translations template for PROJECT.
 # Copyright (C) 2016 ORGANIZATION
 # This file is distributed under the same license as the PROJECT project.
 #
 # FIRST AUTHOR <EMAIL@ADDRESS>, 2016.
 # liueigi <liueigi@gmail.com>, 2016.
 # Jeff Huang <s8321414@gmail.com>, 2016.
 # pan93412 <pan93412@gmail.com>, 2018, 2019.
 msgid ""
 msgstr ""
 "Project-Id-Version: kdeconnect-android\n"
 "Report-Msgid-Bugs-To: EMAIL@ADDRESS\n"
 "POT-Creation-Date: 2019-03-18 03:03+0100\n"
-"PO-Revision-Date: 2019-03-12 22:22+0800\n"
+"PO-Revision-Date: 2019-03-19 19:36+0800\n"
 "Last-Translator: pan93412 <pan93412@gmail.com>\n"
 "Language-Team: Chinese <zh-l10n@linux.org.tw>\n"
 "Language: zh_TW\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "X-Generator: Lokalize 18.12.3\n"
 "Generated-By: Babel 2.2.0\n"
 "Plural-Forms: nplurals=1; plural=0;\n"
 
 msgctxt "kde_connect"
 msgid "KDE Connect"
 msgstr "KDE 連線"
 
 msgctxt "foreground_notification_no_devices"
 msgid "Not connected to any device"
 msgstr "沒有連線到任何裝置"
 
 #, c-format
 msgctxt "foreground_notification_devices"
 msgid "Connected to: %s"
 msgstr "已連線到：%s"
 
 msgctxt "pref_plugin_telephony"
 msgid "Telephony notifier"
 msgstr "電話通知器"
 
 msgctxt "pref_plugin_telephony_desc"
 msgid "Send notifications for incoming calls"
 msgstr "傳送未接來電的通知"
 
 msgctxt "pref_plugin_battery"
 msgid "Battery report"
 msgstr "電池報告"
 
 msgctxt "pref_plugin_battery_desc"
 msgid "Periodically report battery status"
 msgstr "定期回報電池狀態"
 
 msgctxt "pref_plugin_sftp"
 msgid "Filesystem expose"
 msgstr "顯示檔案系統"
 
 msgctxt "pref_plugin_sftp_desc"
 msgid "Allows to browse this device's filesystem remotely"
 msgstr "同意讓遠端可以瀏覽檔案系統"
 
 msgctxt "pref_plugin_clipboard"
 msgid "Clipboard sync"
 msgstr "同步剪貼板"
 
 msgctxt "pref_plugin_clipboard_desc"
 msgid "Share the clipboard content"
 msgstr "分享剪貼板的內容"
 
 msgctxt "pref_plugin_mousepad"
 msgid "Remote input"
 msgstr "遠端輸入"
 
 msgctxt "pref_plugin_mousepad_desc"
 msgid "Use your phone or tablet as a touchpad and keyboard"
 msgstr "使用您的智慧型手機或者平板來模擬觸碰板與鍵盤"
 
 msgctxt "pref_plugin_presenter"
 msgid "Slideshow remote"
 msgstr "遠端投影片"
 
 msgctxt "pref_plugin_presenter_desc"
 msgid "Use your device to change slides in a presentation"
 msgstr "使用您的裝置來切換簡報中的投影片"
 
 msgctxt "pref_plugin_remotekeyboard"
 msgid "Receive remote keypresses"
 msgstr "接收遠端按鍵輸入"
 
 msgctxt "pref_plugin_remotekeyboard_desc"
 msgid "Receive keypress events from remote devices"
 msgstr "從遠端裝置接收按鍵輸入活動"
 
 msgctxt "pref_plugin_mpris"
 msgid "Multimedia controls"
 msgstr "多媒體控制"
 
 msgctxt "pref_plugin_mpris_desc"
 msgid "Provides a remote control for your media player"
 msgstr "成為您多媒體播放器的遙控器"
 
 msgctxt "pref_plugin_runcommand"
 msgid "Run Command"
 msgstr "執行指令"
 
 msgctxt "pref_plugin_runcommand_desc"
 msgid "Trigger remote commands from your phone or tablet"
 msgstr "從您的智慧型手機或者平板當中觸發遠端設備上的命令"
 
 msgctxt "pref_plugin_contacts"
 msgid "Contacts Synchronizer"
 msgstr "同步聯絡人工具"
 
 msgctxt "pref_plugin_contacts_desc"
 msgid "Allow synchronizing the device's contacts book"
 msgstr "允許同步裝置的通訊錄"
 
 msgctxt "pref_plugin_ping"
 msgid "Ping"
 msgstr "Ping回應封包"
 
 msgctxt "pref_plugin_ping_desc"
 msgid "Send and receive pings"
 msgstr "傳送與接收Ping回應封包"
 
 msgctxt "pref_plugin_notifications"
 msgid "Notification sync"
 msgstr "同步通知"
 
 msgctxt "pref_plugin_notifications_desc"
 msgid "Access your notifications from other devices"
 msgstr "存取其他設備上的通知"
 
 msgctxt "pref_plugin_receive_notifications"
 msgid "Receive notifications"
 msgstr "接收通知"
 
 msgctxt "pref_plugin_receive_notifications_desc"
 msgid "Receive notifications from the other device and display them on Android"
 msgstr "在Android上顯示從其他裝置收到的通知"
 
 msgctxt "pref_plugin_sharereceiver"
 msgid "Share and receive"
 msgstr "分享與接收"
 
 msgctxt "pref_plugin_sharereceiver_desc"
 msgid "Share files and URLs between devices"
 msgstr "在兩個設備當中互相分享URL網址與檔案"
 
 msgctxt "plugin_not_available"
 msgid "This feature is not available in your Android version"
 msgstr "這個功能無法在您的Android版本上執行。"
 
 msgctxt "device_list_empty"
 msgid "No devices"
 msgstr "沒有裝置"
 
 msgctxt "ok"
 msgid "OK"
 msgstr "OK"
 
 msgctxt "cancel"
 msgid "Cancel"
 msgstr "取消"
 
 msgctxt "open_settings"
 msgid "Open settings"
 msgstr "開啟設定"
 
 msgctxt "no_permissions"
 msgid "You need to grant permission to access notifications"
 msgstr "您需要授予存取通知的權限"
 
 msgctxt "no_permission_mprisreceiver"
 msgid ""
 "To be able to control your media players you need to grant access to the "
 "notifications"
 msgstr "為了要能控制您的媒體播放器，您需要提供「通知」的權限"
 
 msgctxt "no_permissions_remotekeyboard"
 msgid ""
 "To receive keypresses you need to activate the KDE Connect Remote Keyboard"
-msgstr ""
+msgstr "若要接收鍵盤按鍵事件，您需要啟用 KDE 連線遠端鍵盤功能"
 
 msgctxt "send_ping"
 msgid "Send ping"
 msgstr "傳送Ping回應封包"
 
 msgctxt "open_mpris_controls"
 msgid "Multimedia control"
 msgstr "多媒體控制"
 
 msgctxt "remotekeyboard_editing_only_title"
 msgid "Handle remote keys only when editing"
 msgstr "當編輯時只處理遠端按鍵"
 
 msgctxt "remotekeyboard_not_connected"
 msgid ""
 "There is no active remote keyboard connection, establish one in kdeconnect"
 msgstr "這裡沒有建立在 kdeconnect 之上的使用中遠端鍵盤連線。"
 
 msgctxt "remotekeyboard_connected"
 msgid "Remote keyboard connection is active"
 msgstr "遠端鍵盤連線為啟用狀態"
 
 msgctxt "remotekeyboard_multiple_connections"
 msgid ""
 "There is more than one remote keyboard connection, select the device to "
 "configure"
 msgstr "這裡有兩個以上的遠端鍵盤連結，選擇一個裝置以設定。"
 
 msgctxt "open_mousepad"
 msgid "Remote input"
 msgstr "遠端輸入"
 
 msgctxt "mousepad_info"
 msgid ""
 "Move a finger on the screen to move the mouse cursor. Tap for a click, and "
 "use two/three fingers for right and middle buttons. Use 2 fingers to scroll. "
 "Use a long press to drag'n drop."
 msgstr ""
 "在您的智慧型手機的螢幕上移動手指頭，用來控制電腦螢幕的鼠標。點擊表示滑鼠的左"
 "鍵，使用兩隻/三隻手指頭點擊來表示滑鼠的右鍵/中鍵。使用兩隻手指頭捲動。長按則"
 "表示要拖拉。"
 
 msgctxt "mousepad_double_tap_settings_title"
 msgid "Set two finger tap action"
 msgstr "設定兩隻手指頭點擊的動作"
 
 msgctxt "mousepad_triple_tap_settings_title"
 msgid "Set three finger tap action"
 msgstr "設定三隻手指頭點擊的動作"
 
 msgctxt "mousepad_sensitivity_settings_title"
 msgid "Set touchpad sensitivity"
 msgstr "設定觸碰板的靈敏度"
 
 msgctxt "mousepad_acceleration_profile_settings_title"
 msgid "Set pointer acceleration"
 msgstr "設定指針加速度"
 
 msgctxt "mousepad_scroll_direction_title"
 msgid "Reverse Scrolling Direction"
 msgstr "滾動方向相反"
 
 msgctxt "mousepad_tap_entries:0"
 msgid "Right click"
 msgstr "右鍵點擊"
 
 msgctxt "mousepad_tap_entries:1"
 msgid "Middle click"
 msgstr "中鍵點擊"
 
 msgctxt "mousepad_tap_entries:2"
 msgid "Nothing"
 msgstr "無"
 
 msgctxt "mousepad_sensitivity_entries:0"
 msgid "Slowest"
 msgstr "慢"
 
 msgctxt "mousepad_sensitivity_entries:1"
 msgid "Above Slowest"
 msgstr "最慢"
 
 msgctxt "mousepad_sensitivity_entries:2"
 msgid "Default"
 msgstr "預設"
 
 msgctxt "mousepad_sensitivity_entries:3"
 msgid "Above Default"
 msgstr "高於預設值"
 
 msgctxt "mousepad_sensitivity_entries:4"
 msgid "Fastest"
 msgstr "最快"
 
 msgctxt "mousepad_acceleration_profile_entries:0"
 msgid "No Acceleration"
 msgstr "沒有加速度"
 
 msgctxt "mousepad_acceleration_profile_entries:1"
 msgid "Weakest"
 msgstr "最脆弱"
 
 msgctxt "mousepad_acceleration_profile_entries:2"
 msgid "Weaker"
 msgstr "脆弱"
 
 msgctxt "mousepad_acceleration_profile_entries:3"
 msgid "Medium"
 msgstr "中等"
 
 msgctxt "mousepad_acceleration_profile_entries:4"
 msgid "Stronger"
 msgstr "安全"
 
 msgctxt "mousepad_acceleration_profile_entries:5"
 msgid "Strongest"
 msgstr "最安全"
 
 msgctxt "category_connected_devices"
 msgid "Connected devices"
 msgstr "已連接的設備"
 
 msgctxt "category_not_paired_devices"
 msgid "Available devices"
 msgstr "可連接的設備"
 
 msgctxt "category_remembered_devices"
 msgid "Remembered devices"
 msgstr "已記住的設備"
 
 msgctxt "device_menu_plugins"
 msgid "Plugin settings"
 msgstr "擴展插件設定"
 
 msgctxt "device_menu_unpair"
 msgid "Unpair"
 msgstr "取消配對"
 
 msgctxt "device_not_reachable"
 msgid "Paired device not reachable"
 msgstr "配對的設備無法連接"
 
 msgctxt "pair_new_device"
 msgid "Pair new device"
 msgstr "配對新設備"
 
 msgctxt "unknown_device"
 msgid "Unknown device"
 msgstr "不明的設備"
 
 msgctxt "error_not_reachable"
 msgid "Device not reachable"
 msgstr "設備無法連接"
 
 msgctxt "error_already_requested"
 msgid "Pairing already requested"
 msgstr "已請求配對"
 
 msgctxt "error_already_paired"
 msgid "Device already paired"
 msgstr "裝置已經配對"
 
 msgctxt "error_could_not_send_package"
 msgid "Could not send package"
 msgstr "無法傳送封包"
 
 msgctxt "error_timed_out"
 msgid "Timed out"
 msgstr "逾時"
 
 msgctxt "error_canceled_by_user"
 msgid "Canceled by user"
 msgstr "使用者中斷"
 
 msgctxt "error_canceled_by_other_peer"
 msgid "Canceled by other peer"
 msgstr "被其他同等功能應用中斷"
 
 msgctxt "error_invalid_key"
 msgid "Invalid key received"
 msgstr "接收的密鑰無效"
 
 msgctxt "encryption_info_title"
 msgid "Encryption Info"
 msgstr "加密資訊"
 
 msgctxt "encryption_info_msg_no_ssl"
 msgid ""
 "The other device doesn't use a recent version of KDE Connect, using the "
 "legacy encryption method."
 msgstr "其他的設備沒有使用新版本的KDE連線，使用傳統的加密模式。"
 
 msgctxt "my_device_fingerprint"
 msgid "SHA1 fingerprint of your device certificate is:"
 msgstr "您設備上的SHA1指紋辨識認證是："
 
 msgctxt "remote_device_fingerprint"
 msgid "SHA1 fingerprint of remote device certificate is:"
 msgstr "您遠端設備上的SHA1指紋辨識認證是："
 
 msgctxt "pair_requested"
 msgid "Pair requested"
 msgstr "已請求配對"
 
 #, c-format
 msgctxt "pairing_request_from"
 msgid "Pairing request from %1s"
 msgstr "從 %1s 來的配對請求"
 
 #, c-format
 msgctxt "received_url_title"
 msgid "Received link from %1s"
 msgstr "已從 %1s 連線接收"
 
 #, c-format
 msgctxt "received_url_text"
 msgid "Tap to open '%1s'"
 msgstr "點擊開啟 '%1s'"
 
 #, c-format
 msgctxt "incoming_file_title"
 msgid "Receiving %1$d file from %2$s"
 msgid_plural "Receiving %1$d files from %2$s"
 msgstr[0] "正在從 %2$s 接收 %1$d 個檔案"
 
 #, c-format
 msgctxt "incoming_files_text"
 msgid "File: %1s"
 msgid_plural "(File %2$d of %3$d) : %1$s"
 msgstr[0] "（檔案 %2$d/%3$d）：%1$s"
 
 #, c-format
 msgctxt "outgoing_file_title"
 msgid "Sending file to %1s"
 msgstr "正在將檔案發送到 %1s"
 
 #, c-format
 msgctxt "outgoing_files_title"
 msgid "Sending files to %1s"
 msgstr "正在將檔案發送到 %1s"
 
 #, c-format
 msgctxt "outgoing_files_text"
 msgid "Sent %1$d file"
 msgid_plural "Sent %1$d out of %2$d files"
 msgstr[0] "傳送 %1$d 個檔案，共 %2$d 個檔案。"
 
 #, c-format
 msgctxt "received_files_title"
 msgid "Received file from %1$s"
 msgid_plural "Received %2$d files from %1$s"
 msgstr[0] "已從 %1$s 接收 %2$d 個檔案"
 
 #, c-format
 msgctxt "received_files_fail_title"
 msgid "Failed receiving file from %1$s"
 msgid_plural "Failed receiving %2$d of %3$d files from %1$s"
 msgstr[0] "無法從 %1$s 接收到 %2$d/%3$d 個檔案"
 
 #, c-format
 msgctxt "received_file_text"
 msgid "Tap to open '%1s'"
 msgstr "點擊開啟 '%1s'"
 
 #, c-format
 msgctxt "cannot_create_file"
 msgid "Cannot create file %s"
 msgstr "無法建立 %s 檔案"
 
 #, c-format
 msgctxt "sent_file_title"
 msgid "Sent file to %1s"
 msgstr "將檔案傳送到 %1s"
 
 #, c-format
 msgctxt "sent_file_text"
 msgid "%1s"
 msgstr "%1s"
 
 #, c-format
 msgctxt "sent_file_failed_title"
 msgid "Failed to send file to %1s"
 msgstr "傳送到 %1s 的檔案失敗"
 
 #, c-format
 msgctxt "sent_file_failed_text"
 msgid "%1s"
 msgstr "%1s"
 
 msgctxt "tap_to_answer"
 msgid "Tap to answer"
 msgstr "點擊即可應答"
 
 msgctxt "reconnect"
 msgid "Reconnect"
 msgstr "重新連線"
 
 msgctxt "right_click"
 msgid "Send Right Click"
 msgstr "傳送右鍵點擊"
 
 msgctxt "middle_click"
 msgid "Send Middle Click"
 msgstr "傳送中鍵點擊"
 
 msgctxt "show_keyboard"
 msgid "Show Keyboard"
 msgstr "顯示鍵盤"
 
 msgctxt "device_not_paired"
 msgid "Device not paired"
 msgstr "裝置未配對"
 
 msgctxt "request_pairing"
 msgid "Request pairing"
 msgstr "請求配對"
 
 msgctxt "pairing_accept"
 msgid "Accept"
 msgstr "同意"
 
 msgctxt "pairing_reject"
 msgid "Reject"
 msgstr "回絕"
 
 msgctxt "device"
 msgid "Device"
 msgstr "裝置"
 
 msgctxt "pair_device"
 msgid "Pair device"
 msgstr "配對裝置"
 
 msgctxt "settings"
 msgid "Settings"
 msgstr "設定"
 
 msgctxt "mpris_play"
 msgid "Play"
 msgstr "播放"
 
 msgctxt "mpris_pause"
 msgid "Pause"
 msgstr "暫停"
 
 msgctxt "mpris_previous"
 msgid "Previous"
 msgstr "往前"
 
 msgctxt "mpris_rew"
 msgid "Rewind"
 msgstr "往後"
 
 msgctxt "mpris_ff"
 msgid "Fast-forward"
 msgstr "快轉"
 
 msgctxt "mpris_next"
 msgid "Next"
 msgstr "下一首"
 
 msgctxt "mpris_volume"
 msgid "Volume"
 msgstr "音量"
 
 msgctxt "mpris_settings"
 msgid "Multimedia Settings"
 msgstr "多媒體設定"
 
 msgctxt "mpris_time_settings_title"
 msgid "Forward/rewind buttons"
 msgstr "往前/往後按鍵"
 
 msgctxt "mpris_time_settings_summary"
 msgid "Adjust the time to fast forward/rewind when pressed"
 msgstr "調整按下時往前 / 往後的時間"
 
 msgctxt "mpris_time_entries:0"
 msgid "10 seconds"
 msgstr "10秒鐘"
 
 msgctxt "mpris_time_entries:1"
 msgid "20 seconds"
 msgstr "20秒鐘"
 
 msgctxt "mpris_time_entries:2"
 msgid "30 seconds"
 msgstr "30秒鐘"
 
 msgctxt "mpris_time_entries:3"
 msgid "1 minute"
 msgstr "1分鐘"
 
 msgctxt "mpris_time_entries:4"
 msgid "2 minutes"
 msgstr "2分鐘"
 
 msgctxt "mpris_notification_settings_title"
 msgid "Show media control notification"
 msgstr "顯示媒體控制項通知"
 
 msgctxt "mpris_notification_settings_summary"
 msgid "Allow controlling your media players without opening KDE Connect"
 msgstr "允許控制您的媒體播放器而不需要開啟 KDE 連線"
 
 msgctxt "share_to"
 msgid "Share To…"
 msgstr "分享給…"
 
 msgctxt "protocol_version_older"
 msgid "This device uses an old protocol version"
 msgstr "這個裝置使用舊版本的通訊協定"
 
 msgctxt "protocol_version_newer"
 msgid "This device uses a newer protocol version"
 msgstr "此設備使用較新的通訊協定"
 
 msgctxt "general_settings"
 msgid "General Settings"
 msgstr "通用設定"
 
 msgctxt "plugin_settings"
 msgid "Settings"
 msgstr "設定"
 
 #, c-format
 msgctxt "plugin_settings_with_name"
 msgid "%s settings"
 msgstr "%s 設定"
 
 msgctxt "device_name"
 msgid "Device name"
 msgstr "設備名稱"
 
 #, c-format
 msgctxt "device_name_preference_summary"
 msgid "%s"
 msgstr "%s"
 
 msgctxt "invalid_device_name"
 msgid "Invalid device name"
 msgstr "無效的設備名稱"
 
 msgctxt "shareplugin_text_saved"
 msgid "Received text, saved to clipboard"
 msgstr "已接收文字，並且儲存到剪貼簿"
 
 msgctxt "custom_devices_settings"
 msgid "Custom device list"
 msgstr "自定義設備列表"
 
 msgctxt "pair_device_action"
 msgid "Pair a new device"
 msgstr "配對新設備"
 
 #, c-format
 msgctxt "unpair_device_action"
 msgid "Unpair %s"
 msgstr "未配對 %s"
 
 msgctxt "custom_device_list"
 msgid "Add devices by IP"
 msgstr "以IP來新增設備"
 
 #, c-format
 msgctxt "delete_custom_device"
 msgid "Delete %s?"
 msgstr "刪除 %s？"
 
 msgctxt "custom_device_deleted"
 msgid "Custom device deleted"
 msgstr "已刪除自訂裝置"
 
 msgctxt "custom_device_list_help"
 msgid ""
 "If your device is not automatically detected you can add its IP address or "
 "hostname by clicking on the Floating Action Button"
 msgstr ""
 "若未自動偵測到您的裝置，您可透過點選「浮動動作按鈕」來新增該裝置的IP 位址或主"
 "機名稱"
 
 msgctxt "custom_device_fab_hint"
 msgid "Add a device"
 msgstr "新增裝置"
 
 msgctxt "undo"
 msgid "Undo"
 msgstr "復原"
 
 msgctxt "share_notification_preference"
 msgid "Noisy notifications"
 msgstr "通知方式"
 
 msgctxt "share_notification_preference_summary"
 msgid "Vibrate and play a sound when receiving a file"
 msgstr "當接收檔案時發出振動以及播放聲音"
 
 msgctxt "share_destination_customize"
 msgid "Customize destination directory"
 msgstr "自訂目標路徑"
 
 msgctxt "share_destination_customize_summary_disabled"
 msgid "Received files will appear in Downloads"
 msgstr "接收到的檔案將會在 Downloads 上顯示。"
 
 msgctxt "share_destination_customize_summary_enabled"
 msgid "Files will be stored in the directory below"
 msgstr "檔案將會儲存在下方所示的資料夾"
 
 msgctxt "share_destination_folder_preference"
 msgid "Destination directory"
 msgstr "目標路徑"
 
 msgctxt "share"
 msgid "Share"
 msgstr "分享"
 
 #, c-format
 msgctxt "share_received_file"
 msgid "Share \"%s\""
 msgstr "分享「%s」"
 
 msgctxt "title_activity_notification_filter"
 msgid "Notification filter"
 msgstr "通知過濾器"
 
 msgctxt "filter_apps_info"
 msgid "Notifications will be synchronized for the selected apps."
 msgstr "將會以您選擇的App應用程式啟用同步通知"
 
 msgctxt "sftp_internal_storage"
 msgid "Internal storage"
 msgstr "內部儲存空間"
 
 #, c-format
 msgctxt "sftp_sdcard_num"
 msgid "SD card %d"
 msgstr "SD卡 %d"
 
 msgctxt "sftp_sdcard"
 msgid "SD card"
 msgstr "SD卡"
 
 msgctxt "sftp_readonly"
 msgid "(read only)"
 msgstr "（唯讀）"
 
 msgctxt "sftp_camera"
 msgid "Camera pictures"
 msgstr "相機圖片"
 
 msgctxt "add_device_dialog_title"
 msgid "Add device"
 msgstr "新增裝置"
 
 msgctxt "add_device_hint"
 msgid "Hostname or IP address"
 msgstr "主機名稱 或 IP 位址"
 
 msgctxt "sftp_preference_detected_sdcards"
 msgid "Detected SD cards"
 msgstr "已偵測到 SD 卡"
 
 msgctxt "sftp_preference_edit_sdcard_title"
 msgid "Edit SD card"
 msgstr "編輯 SD 卡"
 
 msgctxt "sftp_preference_configured_storage_locations"
 msgid "Configured storage locations"
 msgstr "已設定儲存空間位置"
 
 msgctxt "sftp_preference_add_storage_location_title"
 msgid "Add storage location"
 msgstr "新增儲存空間位置"
 
 msgctxt "sftp_preference_edit_storage_location"
 msgid "Edit storage location"
 msgstr "編輯儲存空間位置"
 
 msgctxt "sftp_preference_add_camera_shortcut"
 msgid "Add camera folder shortcut"
 msgstr "新增相機資料夾的捷徑"
 
 msgctxt "sftp_preference_add_camera_shortcut_summary_on"
 msgid "Add a shortcut to the camera folder"
 msgstr "新增連結到相機資料夾的捷徑"
 
 msgctxt "sftp_preference_add_camera_shortcut_summary_off"
 msgid "Do not add a shortcut to the camera folder"
 msgstr "請勿新增連結到相機資料夾的捷徑"
 
 msgctxt "sftp_storage_preference_storage_location"
 msgid "Storage location"
 msgstr "儲存空間位置"
 
 msgctxt "sftp_storage_preference_storage_location_already_configured"
 msgid "This location has already been configured"
 msgstr "此位置已被設定"
 
 msgctxt "sftp_storage_preference_click_to_select"
 msgid "click to select"
 msgstr "按一下選擇"
 
 msgctxt "sftp_storage_preference_display_name"
 msgid "Display name"
 msgstr "顯示名稱"
 
 msgctxt "sftp_storage_preference_display_name_already_used"
 msgid "This display name is already used"
 msgstr "此顯示名稱已被使用"
 
 msgctxt "sftp_storage_preference_display_name_cannot_be_empty"
 msgid "Display name cannot be empty"
 msgstr "顯示名稱不得空白"
 
 msgctxt "sftp_action_mode_menu_delete"
 msgid "Delete"
 msgstr "刪除"
 
 msgctxt "sftp_no_sdcard_detected"
 msgid "No SD card detected"
 msgstr "未偵測到 SD 卡"
 
 msgctxt "sftp_no_storage_locations_configured"
 msgid "No storage locations configured"
 msgstr "未設定儲存空間位置"
 
 msgctxt "sftp_saf_permission_explanation"
 msgid "To access files remotely you have to configure storage locations"
 msgstr "若要遠端存取檔案，您需先設定儲存空間位置"
 
 msgctxt "add_host"
 msgid "Add host/IP"
 msgstr "增加 host/IP"
 
 msgctxt "add_host_hint"
 msgid "Hostname or IP"
 msgstr "主機名稱或 IP"
 
 msgctxt "no_players_connected"
 msgid "No players found"
 msgstr "沒有發現播放器"
 
 #, c-format
 msgctxt "mpris_player_on_device"
 msgid "%1$s on %2$s"
 msgstr "%1$s on %2$s"
 
 msgctxt "send_files"
 msgid "Send files"
 msgstr "傳送檔案"
 
 msgctxt "pairing_title"
 msgid "KDE Connect Devices"
 msgstr "KDE連線裝置"
 
 msgctxt "pairing_description"
 msgid ""
 "Other devices running KDE Connect in your same network should appear here."
 msgstr "在您相同網域當中，有其他有執行KDE連線的裝置會出現在這裡。"
 
 msgctxt "device_paired"
 msgid "Device paired"
 msgstr "裝置已配對"
 
 msgctxt "device_rename_title"
 msgid "Rename device"
 msgstr "更改裝置名稱"
 
 msgctxt "device_rename_confirm"
 msgid "Rename"
 msgstr "更改名稱"
 
 msgctxt "refresh"
 msgid "Refresh"
 msgstr "刷新"
 
 msgctxt "unreachable_description"
 msgid ""
 "This paired device is not reachable. Make sure it is connected to your same "
 "network."
 msgstr "此配對的裝置無法連接。 請確保它連接到與您相同的網域。"
 
 msgctxt "on_data_message"
 msgid ""
 "It looks like you are on a mobile data connection. KDE Connect only works on "
 "local networks."
 msgstr "看起來你現在正使用行動數據連線。KDE 連線只在區域網路上運作。"
 
 msgctxt "no_file_browser"
 msgid "There are no file browsers installed."
 msgstr "沒有安裝此檔案的瀏覽程式"
 
 msgctxt "pref_plugin_telepathy"
 msgid "Send SMS"
 msgstr "傳送簡訊"
 
 msgctxt "pref_plugin_telepathy_desc"
 msgid "Send text messages from your desktop"
 msgstr "傳送文字簡訊到您的電腦桌面"
 
 msgctxt "plugin_not_supported"
 msgid "This plugin is not supported by the device"
 msgstr "這個擴充插件並不支援您的手機"
 
 msgctxt "findmyphone_title"
 msgid "Find my phone"
 msgstr "找尋我的手機"
 
 msgctxt "findmyphone_title_tablet"
 msgid "Find my tablet"
 msgstr "找尋我的平板"
 
 msgctxt "findmyphone_title_tv"
 msgid "Find my TV"
 msgstr "尋找我的電視"
 
 msgctxt "findmyphone_description"
 msgid "Rings this device so you can find it"
 msgstr "讓這個裝置發出聲響讓您能找到它"
 
 msgctxt "findmyphone_found"
 msgid "Found"
 msgstr "找到"
 
 msgctxt "open"
 msgid "Open"
 msgstr "開啟"
 
 msgctxt "close"
 msgid "Close"
 msgstr "關閉"
 
 msgctxt "no_permissions_storage"
 msgid "You need to grant permissions to access the storage"
 msgstr "您需要授予儲存權限"
 
 msgctxt "plugins_need_permission"
 msgid "Some Plugins need permissions to work (tap for more info):"
 msgstr "部份的附加元件需要權限才能運作（點擊以取得更多資訊）"
 
 msgctxt "permission_explanation"
 msgid "This plugin needs permissions to work"
 msgstr "這附加元件需要權限以運作"
 
 msgctxt "optional_permission_explanation"
 msgid "You need to grant extra permissions to enable all functions"
 msgstr "你需要授予延伸的權限以啟用所有的功能"
 
 msgctxt "plugins_need_optional_permission"
 msgid ""
 "Some plugins have features disabled because of lack of permission (tap for "
 "more info):"
 msgstr "部份的附加元件因為缺乏權限，而導致功能被停用。（點擊以了解更多資訊）："
 
 msgctxt "share_optional_permission_explanation"
 msgid ""
 "To share files between your phone and your desktop you need to give access "
 "to the phone's storage"
 msgstr "為了要在您的手機與電腦之間分享檔案，你需要同意存取手機的儲存空間。"
 
 msgctxt "telepathy_permission_explanation"
 msgid ""
 "To read and write SMS from your desktop you need to give permission to SMS"
 msgstr "為了要在您的個人電腦上讀取與撰寫簡訊，你需要提供簡訊的權限。"
 
 msgctxt "telephony_permission_explanation"
 msgid ""
 "To see phone calls and SMS from the desktop you need to give permission to "
 "phone calls and SMS"
 msgstr "為了要在您的電腦上檢視手機通話與簡訊，你需要提供手機通話與簡訊的權限。"
 
 msgctxt "telephony_optional_permission_explanation"
 msgid ""
 "To see a contact name instead of a phone number you need to give access to "
 "the phone's contacts"
 msgstr "為了要讓聯絡人名稱取代手機號碼，您需要提供手機通訊錄的權限。"
 
 msgctxt "contacts_permission_explanation"
 msgid ""
 "To share your contacts book with the desktop, you need to give contacts "
 "permission"
 msgstr "為了要與電腦分享您的通訊錄，您必須提供「聯絡人」的權限"
 
 msgctxt "select_ringtone"
 msgid "Select a ringtone"
 msgstr "選擇一個鈴聲"
 
 msgctxt "telephony_pref_blocked_title"
 msgid "Blocked numbers"
 msgstr "已封鎖號碼"
 
 msgctxt "telephony_pref_blocked_dialog_desc"
 msgid ""
 "Don't show calls and SMS from these numbers. Please specify one number per "
 "line"
 msgstr "不顯示這些號碼的來電與簡訊。請在一行指定一個電話號碼。"
 
 msgctxt "mpris_coverart_description"
 msgid "Cover art of current media"
 msgstr "目前媒體的專輯圖像"
 
 msgctxt "device_icon_description"
 msgid "Device icon"
 msgstr "裝置圖示"
 
 msgctxt "settings_icon_description"
 msgid "Settings icon"
 msgstr "設定圖示"
 
 msgctxt "presenter_fullscreen"
 msgid "Fullscreen"
 msgstr "全螢幕"
 
 msgctxt "presenter_exit"
 msgid "Exit presentation"
 msgstr "離開簡報模式"
 
 msgctxt "presenter_lock_tip"
 msgid ""
 "You can lock your device and use the volume keys to go to the previous/next "
 "slide"
 msgstr "您能鎖定裝置並使用音量鍵前往上 / 下一張投影片"
 
 msgctxt "add_command"
 msgid "Add a command"
 msgstr "增加一行指令"
 
 msgctxt "addcommand_explanation"
 msgid "There are no commands registered"
 msgstr "沒有指令被註冊"
 
 msgctxt "addcommand_explanation2"
 msgid "You can add new commands in the KDE Connect System Settings"
 msgstr "您現在可以在 KDE 連線系統設定增加新的指令"
 
 msgctxt "add_command_description"
 msgid "You can add commands on the desktop"
 msgstr "您可以在電腦上增加指令"
 
 msgctxt "pref_plugin_mprisreceiver"
 msgid "Media Player Control"
 msgstr "控制媒體播放器"
 
 msgctxt "pref_plugin_mprisreceiver_desc"
 msgid "Control your phones media players from another device"
 msgstr "從另外一個裝置操控您手機的媒體播放器"
 
 msgctxt "dark_theme"
 msgid "Dark theme"
 msgstr "暗色主題"
 
 msgctxt "notification_channel_default"
 msgid "Other notifications"
 msgstr "其他通知"
 
 msgctxt "notification_channel_persistent"
 msgid "Persistent indicator"
 msgstr "一致指標"
 
 msgctxt "notification_channel_media_control"
 msgid "Media control"
 msgstr "多媒體控制"
 
 msgctxt "notification_channel_filetransfer"
 msgid "File transfer"
 msgstr "檔案傳輸"
 
 msgctxt "mpris_stop"
 msgid "Stop the current player"
 msgstr "停止目前播放器"
 
 msgctxt "copy_url_to_clipboard"
 msgid "Copy URL to clipboard"
 msgstr "複製 URL 至剪貼簿"
 
 msgctxt "clipboard_toast"
 msgid "Copied to clipboard"
 msgstr "已複製到剪貼簿"
 
 msgctxt "runcommand_notreachable"
 msgid "Device is not reachable"
 msgstr "無法聯絡裝置"
 
 msgctxt "runcommand_notpaired"
 msgid "Device is not paired"
 msgstr "裝置未配對"
 
 msgctxt "runcommand_nosuchdevice"
 msgid "There is no such device"
 msgstr "此處沒有裝置"
 
 msgctxt "runcommand_noruncommandplugin"
 msgid "This device does not have the Run Command Plugin enabled"
 msgstr "裝置未啟用「執行指令外掛程式」"
 
 msgctxt "pref_plugin_findremotedevice"
 msgid "Find remote device"
 msgstr "尋找遠端裝置"
 
 msgctxt "pref_plugin_findremotedevice_desc"
 msgid "Ring your remote device"
 msgstr "使遠端裝置響鈴"
 
 msgctxt "ring"
 msgid "Ring"
 msgstr "響鈴"
 
 msgctxt "pref_plugin_systemvolume"
 msgid "System volume"
 msgstr "系統音量"
 
 msgctxt "pref_plugin_systemvolume_desc"
 msgid "Control the system volume of the remote device"
 msgstr "控制遠端裝置的系統音量"
 
 msgctxt "mute"
 msgid "Mute"
 msgstr "靜音"
 
 msgctxt "all"
 msgid "All"
 msgstr "全部"
 
 msgctxt "devices"
 msgid "Devices"
 msgstr "裝置"
 
 msgctxt "settings_rename"
 msgid "Device name"
 msgstr "裝置名稱"
 
 msgctxt "settings_dark_mode"
 msgid "Dark theme"
 msgstr "暗色主題"
 
 msgctxt "settings_more_settings_title"
 msgid "More settings"
 msgstr "更多設定"
 
 msgctxt "settings_more_settings_text"
 msgid ""
 "Per-device settings can be found under 'Plugin settings' from within a "
 "device."
 msgstr "各裝置設定可在裝置內的「外掛程式設定」底下找到。"
 
 msgctxt "setting_persistent_notification"
 msgid "Show persistent notification"
 msgstr "顯示一致設定"
 
 msgctxt "setting_persistent_notification_oreo"
 msgid "Persistent notification"
 msgstr "一致化通知"
 
 msgctxt "setting_persistent_notification_description"
 msgid "Tap to enable/disable in Notification settings"
 msgstr "點觸以在「通知設定」啟用或停用"
 
 msgctxt "extra_options"
 msgid "Extra options"
 msgstr "延伸選項"
 
 msgctxt "privacy_options"
 msgid "Privacy options"
 msgstr "隱私權選項"
 
 msgctxt "set_privacy_options"
 msgid "Set your privacy options"
 msgstr "設定隱私權選項"
 
 msgctxt "new_notification"
 msgid "New notification"
 msgstr "新通知"
 
 msgctxt "block_contents"
 msgid "Block contents of notifications"
 msgstr "擋住通知內容"
 
 msgctxt "block_images"
 msgid "Block images in notifications"
 msgstr "擋住通知中的圖片"
 
 msgctxt "notification_channel_receivenotification"
 msgid "Notifications from other devices"
 msgstr "其他裝置上的通知"
 
 msgctxt "take_picture"
 msgid "Launch camera"
 msgstr "啟動相機"
 
 msgctxt "plugin_photo_desc"
 msgid "Launch the camera app to ease taking and transferring pictures"
 msgstr "開啟相機應用程式以輕鬆拍攝並傳輸相片"
Index: trunk/l10n-kf5/zh_TW/messages/extragear-network/ktorrent.po
===================================================================
--- trunk/l10n-kf5/zh_TW/messages/extragear-network/ktorrent.po	(revision 1537713)
+++ trunk/l10n-kf5/zh_TW/messages/extragear-network/ktorrent.po	(revision 1537714)
@@ -1,8808 +1,8803 @@
 # translation of ktorrent.po to Chinese Traditional
 # Copyright (C) YEAR This_file_is_part_of_KDE
 # This file is distributed under the same license as the PACKAGE package.
 #
 # Everest Law <tyuuuu2001@yahoo.com.hk>, 2007.
 # Goodhorse <franklin@goodhorse.idv.tw>, 2008.
 # Franklin Weng <franklin@goodhorse.idv.tw>, 2008, 2010, 2011, 2012, 2013, 2014.
 # Jeff Huang <s8321414@gmail.com>, 2016.
 # pan93412 <pan93412@gmail.com>, 2018, 2019.
 # Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv dot tw>, 2008, 2009, 2010.
 msgid ""
 msgstr ""
 "Project-Id-Version: ktorrent\n"
 "Report-Msgid-Bugs-To: http://bugs.kde.org\n"
 "POT-Creation-Date: 2019-03-18 03:04+0100\n"
-"PO-Revision-Date: 2019-02-23 20:46+0800\n"
+"PO-Revision-Date: 2019-03-19 19:36+0800\n"
 "Last-Translator: pan93412 <pan93412@gmail.com>\n"
 "Language-Team: Chinese <zh-l10n@linux.org.tw>\n"
 "Language: zh_TW\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Lokalize 18.12.2\n"
+"X-Generator: Lokalize 18.12.3\n"
 
 #, kde-format
 msgctxt "NAME OF TRANSLATORS"
 msgid "Your names"
 msgstr "Everest Law, Jeff Huang"
 
 #, kde-format
 msgctxt "EMAIL OF TRANSLATORS"
 msgid "Your emails"
 msgstr "tyuuuu2001@yahoo.com.hk, s8321414@gmail.com"
 
 #: ktorrent/core.cpp:171
 #, kde-format
 msgid ""
 "KTorrent is unable to accept connections because the TCP port %1 is already "
 "in use by another program."
 msgstr "由於 TCP 連接埠 %1 已被其他程式佔用，KTorrent 無法接受連線。"
 
 #: ktorrent/core.cpp:185
 #, kde-format
 msgid ""
 "KTorrent is unable to accept connections because the UDP port %1 is already "
 "in use by another program."
 msgstr "由於 UDP 連接埠 %1 已被其他程式佔用，KTorrent 無法接受連線。"
 
 #: ktorrent/core.cpp:291
 #, kde-format
 msgid ""
 "Opening the torrent <b>%1</b>, would share one or more files with the "
 "following torrents. Torrents are not allowed to write to the same files. "
 msgstr ""
 "Torrent <b>%1</b> 與以下的 torrents 有一個以上的共同的檔案。但是它們不允許寫"
 "入相同的檔案。"
 
 #: ktorrent/core.cpp:976
 #, kde-format
 msgid "KTorrent is running one or more torrents"
 msgstr "KTorrent 目前正執行一個以上的 torrent"
 
 #: ktorrent/core.cpp:1075
 #, kde-format
 msgid "Cannot create torrent: %1"
 msgstr "無法建立 torrent: %1 "
 
 #: ktorrent/core.cpp:1178
 #, kde-format
 msgid ""
 "One or more storage volumes are not mounted. In order to start this torrent, "
 "they need to be mounted."
 msgstr "有一個以上的儲存裝置未被掛載。要啟動此 torrent，必須先將它們掛載上來。"
 
 #: ktorrent/core.cpp:1179
 #, kde-format
 msgid "Retry"
 msgstr "重試"
 
 #: ktorrent/core.cpp:1188
 #, kde-format
 msgid "Storage volume %1 is not mounted"
 msgstr "儲存裝置 %1 未掛載"
 
 #: ktorrent/core.cpp:1190
 #, kde-format
 msgid "Storage volumes %1 are not mounted"
 msgstr "這些儲存裝置 %1 未掛載"
 
 #: ktorrent/core.cpp:1202
 #, kde-format
 msgid ""
 "Several data files of the torrent \"%1\" are missing. \n"
 "Do you want to recreate them, or do you want to not download them?"
 msgstr ""
 "有一些 torrent %1 的資料檔遺失。\n"
 "您要重新建立它們，還是不要再下載了？"
 
 #: ktorrent/core.cpp:1211 ktorrent/core.cpp:1222 ktorrent/core.cpp:1235
 #, kde-format
 msgid "Data files are missing"
 msgstr "資料檔遺失"
 
 #: ktorrent/core.cpp:1221
 #, kde-format
 msgid "Cannot deselect missing files: %1"
 msgstr "無法取消選擇遺失的檔案：%1"
 
 #: ktorrent/core.cpp:1234
 #, kde-format
 msgid "Cannot recreate missing files: %1"
 msgstr "無法重建缺少的檔案：%1"
 
 #: ktorrent/core.cpp:1245
 #, kde-format
 msgid ""
 "The file where the data is saved of the torrent \"%1\" is missing.\n"
 "Do you want to recreate it?"
 msgstr ""
 "Torrent %1 儲存的資料檔案已遺失。\n"
 "您要重建它嗎？"
 
 #: ktorrent/core.cpp:1252 ktorrent/core.cpp:1262
 #, kde-format
 msgid "Data file is missing"
 msgstr "資料檔已遺失"
 
 #: ktorrent/core.cpp:1261
 #, kde-format
 msgid "Cannot recreate data file: %1"
 msgstr "無法重新建立資料檔：%1"
 
 #: ktorrent/core.cpp:1368
 #, kde-format
 msgid "Invalid magnet bittorrent link: %1"
 msgstr "不合法的 magnet bittorrent 連結：%1"
 
 #: ktorrent/core.cpp:1373
 #, kde-format
 msgid ""
 "You are attempting to download a magnet link, and DHT is not enabled. For "
 "optimum results enable DHT."
 msgstr "您正試著下載 magnet 連結，但是未開啟 DHT。為了最佳效果，請開啟 DHT。"
 
 #. i18n: ectx: property (windowTitle), widget (QWidget, GroupPolicyDlg)
 #. i18n: ectx: property (windowTitle), widget (QDialog, AddPeersDlg)
 #: ktorrent/dialogs/addpeersdlg.ui:14 ktorrent/groups/grouppolicydlg.ui:14
 #, kde-format
 msgid "Dialog"
 msgstr "對話框"
 
 #. i18n: ectx: property (text), widget (QLabel, label_3)
 #: ktorrent/dialogs/addpeersdlg.ui:20
 #, kde-format
 msgid ""
 "Enter the IP address or hostname and port number of the peer you wish to add:"
 msgstr "輸入您要新增的端點的 IP 位址或主機名稱，以及連接埠編號："
 
 #. i18n: ectx: property (text), widget (QLabel, label_2)
 #: ktorrent/dialogs/addpeersdlg.ui:34
 #, kde-format
 msgid "Peer:"
 msgstr "端點："
 
 #. i18n: ectx: property (toolTip), widget (QLineEdit, m_ip)
 #: ktorrent/dialogs/addpeersdlg.ui:43
 #, kde-format
 msgid ""
 "<p>The IP address or hostname of the peer you want to connect to, should be "
 "put here.</p>\n"
 "<p><span style=\" font-weight:600;\">Note:</span> We accept both IPv4 and "
 "IPv6 addresses</p>\n"
 msgstr ""
 "<p>您要連線的端點的 IP 位址或主機名稱。</p>\n"
 "<p><span style=\" font-weight:600;\">注意：</span>IPv4 與 IPv6 的位址都可以</"
 "p>\n"
 
 #. i18n: ectx: property (text), widget (QLineEdit, m_ip)
 #. i18n: ectx: property (text), widget (QLineEdit, m_ip_to_add)
 #: ktorrent/dialogs/addpeersdlg.ui:46 ktorrent/ipfilterwidget.ui:34
 #, kde-format
 msgid "127.0.0.1"
 msgstr "127.0.0.1"
 
 #. i18n: ectx: property (text), widget (QLabel, label)
 #. i18n: ectx: property (text), widget (QLabel, label_4)
 #. i18n: ectx: property (text), widget (QLabel, label_2)
 #. i18n: ectx: property (text), widget (QLabel, label_11)
 #. i18n: ectx: property (text), widget (QLabel, textLabel1)
 #: ktorrent/dialogs/addpeersdlg.ui:57 ktorrent/dialogs/torrentcreatordlg.ui:253
 #: ktorrent/pref/networkpref.ui:23 ktorrent/pref/proxypref.ui:49
 #: ktorrent/pref/proxypref.ui:130 ktupnptest/upnptestwidget.ui:65
 #: plugins/scripting/scripts/email_notifications/emailconfig.ui:61
 #: plugins/webinterface/webinterfaceprefwidget.ui:148
 #, kde-format
 msgid "Port:"
 msgstr "連接埠:"
 
 #. i18n: ectx: property (text), widget (QPushButton, m_add_tracker)
 #. i18n: ectx: property (text), widget (QPushButton, m_add_node)
 #. i18n: ectx: property (text), widget (QPushButton, m_add_webseed)
 #. i18n: ectx: property (text), widget (QPushButton, m_add)
 #: ktorrent/dialogs/addpeersdlg.ui:109
 #: ktorrent/dialogs/torrentcreatordlg.ui:186
 #: ktorrent/dialogs/torrentcreatordlg.ui:275
 #: ktorrent/dialogs/torrentcreatordlg.ui:336 ktorrent/ipfilterwidget.ui:46
 #: plugins/search/searchpref.ui:170 plugins/syndication/managefiltersdlg.ui:60
 #, kde-format
 msgid "Add"
 msgstr "加入"
 
 #. i18n: ectx: property (text), widget (QPushButton, m_close)
 #. i18n: ectx: property (text), widget (QPushButton, close_button)
 #: ktorrent/dialogs/addpeersdlg.ui:116 ktorrent/ipfilterwidget.ui:106
 #: ktorrent/view/scanextender.ui:221
 #, kde-format
 msgid "Close"
 msgstr "關閉"
 
 #: ktorrent/dialogs/fileselectdlg.cpp:98
 #, kde-format
 msgid "Show a file tree"
 msgstr "顯示檔案樹狀圖"
 
 #: ktorrent/dialogs/fileselectdlg.cpp:101
 #, kde-format
 msgid "Show a file list"
 msgstr "顯示檔案清單"
 
 #: ktorrent/dialogs/fileselectdlg.cpp:110 plugins/infowidget/fileview.cpp:75
 #, kde-format
 msgid "Filter"
 msgstr "過濾器"
 
 #: ktorrent/dialogs/fileselectdlg.cpp:127
 #, kde-format
 msgid "Opening %1"
 msgstr "開啟 %1 中"
 
 #: ktorrent/dialogs/fileselectdlg.cpp:238
 #, kde-format
 msgid ""
 "Some files of this torrent have been found in the completed downloads "
 "directory. Do you want to import these files and use the completed downloads "
 "directory as the location?"
 msgstr ""
 "此 torrent 的部份檔案在已下載完成的目錄中有找到。您要匯入這些檔案到完整下載目"
 "錄中嗎？"
 
 #: ktorrent/dialogs/fileselectdlg.cpp:241
 #, kde-format
 msgid ""
 "All files of this torrent have been found in the completed downloads "
 "directory. Do you want to import these files and use the completed downloads "
 "directory as the location?"
 msgstr ""
 "此 torrent 的所有檔案在已下載完成的目錄中有找到。您要匯入這些檔案到完整下載目"
 "錄中嗎？"
 
 #: ktorrent/dialogs/fileselectdlg.cpp:245
 #, kde-format
 msgid ""
 "The file <b>%1</b> was found in the completed downloads directory. Do you "
 "want to import this file?"
 msgstr "檔案 <b>%1</b> 在已下載完成的目錄中有找到。您要匯入該檔案嗎？"
 
 #: ktorrent/dialogs/fileselectdlg.cpp:260
 #: ktorrent/dialogs/fileselectdlg.cpp:277
 #, kde-format
 msgid "The directory %1 does not exist, do you want to create it?"
 msgstr "目錄 %1 不存在，您要建立它嗎？"
 
 #: ktorrent/dialogs/fileselectdlg.cpp:310
 #, kde-format
 msgid ""
 "You have deselected the following existing files. You will lose all data in "
 "these files, are you sure you want to do this?"
-msgstr ""
-"您已取消選取以下的檔案。您將會失去所有這些檔案中的資料。您確定要這樣做嗎？"
+msgstr "您已取消選取以下的檔案。您將會失去所有這些檔案中的資料。您確定要這樣做嗎？"
 
 #: ktorrent/dialogs/fileselectdlg.cpp:314
 #, kde-format
 msgid "Yes, delete the files"
 msgstr "好的，把檔案刪除"
 
 #: ktorrent/dialogs/fileselectdlg.cpp:315
 #, kde-format
 msgid "No, keep the files"
 msgstr "不，把檔案保留"
 
 #: ktorrent/dialogs/fileselectdlg.cpp:340
 #, kde-format
 msgid ""
 "Opening the torrent <b>%1</b>, would share one or more files with the "
 "following torrents. Torrents are not allowed to write to the same files. "
 "Please select a different location."
 msgstr ""
 "Torrent <b>%1</b> 與以下的 torrents 有一個以上的共同的檔案。但是它們不允許寫"
 "入相同的檔案。請選擇其它的位置。"
 
 #: ktorrent/dialogs/fileselectdlg.cpp:450 ktorrent/dialogs/pastedialog.cpp:71
 #: ktorrent/dialogs/torrentcreatordlg.cpp:134 libktcore/groups/allgroup.cpp:27
 #, kde-format
 msgid "All Torrents"
 msgstr "所有 Torrents"
 
 #: ktorrent/dialogs/fileselectdlg.cpp:527
 #, kde-format
 msgid "<b>Unable to determine free space</b>"
 msgstr "<b>無法決定可用的空間</b>"
 
 #: ktorrent/dialogs/fileselectdlg.cpp:537
 #, kde-format
 msgid "%1 (%2 in use by existing files)"
 msgstr "%1（%2 正被現有的檔案使用）"
 
 #: ktorrent/dialogs/fileselectdlg.cpp:546
 #, kde-format
 msgctxt "We are %1 bytes short of what we need"
 msgid "%1 short"
 msgstr "少了 %1"
 
 #: ktorrent/dialogs/fileselectdlg.cpp:578
 #, kde-format
 msgid "Existing files: <b>None</b>"
 msgstr "已存在的檔案：<b>無</b>"
 
 #: ktorrent/dialogs/fileselectdlg.cpp:580
 #, kde-format
 msgid "Existing files: <b>All</b>"
 msgstr "已存在的檔案：<b>全部</b>"
 
 #: ktorrent/dialogs/fileselectdlg.cpp:582
 #, kde-format
 msgid "Existing files: <b>%1</b> of <b>%2</b>"
 msgstr "已存在的檔案：<b>%1</b> 個，共 <b>%2</b> 個"
 
 #: ktorrent/dialogs/fileselectdlg.cpp:589
 #, kde-format
 msgid "Existing file: <b>No</b>"
 msgstr "已存在的檔案：<b>否</b>"
 
 #: ktorrent/dialogs/fileselectdlg.cpp:594
 #, kde-format
 msgid "Existing file: <b>Yes</b>"
 msgstr "已存在的檔案：<b>是</b>"
 
 #: ktorrent/dialogs/fileselectdlg.cpp:676
 #, kde-format
 msgid "Clear History"
 msgstr "清除搜尋歷史"
 
 #. i18n: ectx: property (windowTitle), widget (QWidget, FileSelectDlg)
 #: ktorrent/dialogs/fileselectdlg.ui:14
 #, kde-format
 msgid "Select Which Files You Want to Download"
 msgstr "選擇要下載的檔案"
 
 #. i18n: ectx: property (text), widget (QLabel, textLabel1_2)
 #. i18n: ectx: property (text), widget (QCheckBox, m_use_custom_download_location)
 #: ktorrent/dialogs/fileselectdlg.ui:34 plugins/syndication/filtereditor.ui:298
 #, kde-format
 msgid "Download to:"
 msgstr "下載到："
 
 #. i18n: ectx: property (toolTip), widget (QToolButton, m_download_location_history)
 #: ktorrent/dialogs/fileselectdlg.ui:47
 #, kde-format
 msgid "History of all recently used download locations"
 msgstr "所有最近使用的下載位置歷史紀錄"
 
 #. i18n: ectx: property (text), widget (QToolButton, m_download_location_history)
 #. i18n: ectx: property (text), widget (QToolButton, m_move_when_completed_history)
 #. i18n: ectx: property (text), widget (QToolButton, m_tree)
 #. i18n: ectx: property (text), widget (QToolButton, m_list)
 #. i18n: ectx: property (text), widget (QToolButton, prev)
 #. i18n: ectx: property (text), widget (QToolButton, play)
 #. i18n: ectx: property (text), widget (QToolButton, pause)
 #. i18n: ectx: property (text), widget (QToolButton, stop)
 #. i18n: ectx: property (text), widget (QToolButton, next)
 #: ktorrent/dialogs/fileselectdlg.ui:50 ktorrent/dialogs/fileselectdlg.ui:77
 #: ktorrent/dialogs/fileselectdlg.ui:88 ktorrent/dialogs/fileselectdlg.ui:95
 #: plugins/mediaplayer/mediacontroller.ui:32
 #: plugins/mediaplayer/mediacontroller.ui:45
 #: plugins/mediaplayer/mediacontroller.ui:58
 #: plugins/mediaplayer/mediacontroller.ui:71
 #: plugins/mediaplayer/mediacontroller.ui:84
 #, kde-format
 msgid "..."
 msgstr "..."
 
 #. i18n: ectx: property (toolTip), widget (QCheckBox, m_moveCompleted)
 #: ktorrent/dialogs/fileselectdlg.ui:61
 #, kde-format
 msgid ""
 "Moves the files to the specified location when the torrent finishes "
 "downloading."
 msgstr "當 torrent 完成下載後要將資料移動到指定的目錄。"
 
 #. i18n: ectx: property (text), widget (QCheckBox, m_moveCompleted)
 #. i18n: ectx: property (text), widget (QCheckBox, move_on_completion_enabled)
 #. i18n: ectx: property (text), widget (QCheckBox, m_move_on_completion)
 #: ktorrent/dialogs/fileselectdlg.ui:64 ktorrent/view/propertiesdlg.ui:55
 #: plugins/syndication/filtereditor.ui:308
 #, kde-format
 msgid "Move when completed to:"
 msgstr "完成的下載儲存位置："
 
 #. i18n: ectx: property (toolTip), widget (QToolButton, m_move_when_completed_history)
 #: ktorrent/dialogs/fileselectdlg.ui:74
 #, kde-format
 msgid "History of all recently used move when completed locations"
 msgstr "所有最近使用的「完成的下載儲存位置」歷史紀錄"
 
 #. i18n: ectx: property (text), widget (QLabel, label)
 #: ktorrent/dialogs/fileselectdlg.ui:105
 #, kde-format
 msgid "Text encoding:"
 msgstr "文字編碼:"
 
 #. i18n: ectx: property (toolTip), widget (QTreeView, m_file_view)
 #: ktorrent/dialogs/fileselectdlg.ui:132
 #, kde-format
 msgid ""
 "All files in the torrent, you can change them by double clicking on them."
 msgstr "在此 torrent 中的所有檔案，您可以雙擊以變更它們。"
 
 #. i18n: ectx: property (text), widget (QPushButton, m_select_all)
 #: ktorrent/dialogs/fileselectdlg.ui:144
 #, kde-format
 msgid "Select &All"
 msgstr "全選 (&A)"
 
 #. i18n: ectx: property (text), widget (QPushButton, m_select_none)
 #: ktorrent/dialogs/fileselectdlg.ui:151
 #, kde-format
 msgid "Select &None"
 msgstr "全部不選 (&N)"
 
 #. i18n: ectx: property (text), widget (QPushButton, m_invert_selection)
 #: ktorrent/dialogs/fileselectdlg.ui:158
 #, kde-format
 msgid "Invert Selection"
 msgstr "反向選擇"
 
 #. i18n: ectx: property (text), widget (QPushButton, m_collapse_all)
 #: ktorrent/dialogs/fileselectdlg.ui:165
 #, kde-format
 msgid "Collapse All"
 msgstr "折疊全部"
 
 #. i18n: ectx: property (text), widget (QPushButton, m_expand_all)
 #: ktorrent/dialogs/fileselectdlg.ui:172
 #, kde-format
 msgid "Expand All"
 msgstr "展開全部"
 
 #. i18n: ectx: property (text), widget (QLabel, m_existing_found)
 #: ktorrent/dialogs/fileselectdlg.ui:196
 #, kde-format
 msgid "No existing files are found"
 msgstr "沒有找到已存在的檔案"
 
 #. i18n: ectx: property (title), widget (QGroupBox, m_options)
 #. i18n: ectx: property (title), widget (QGroupBox, groupBox)
 #. i18n: ectx: property (title), widget (QGroupBox, groupBox_3)
 #. i18n: ectx: attribute (title), widget (QWidget, tab_3)
 #: ktorrent/dialogs/fileselectdlg.ui:205
 #: ktorrent/dialogs/torrentcreatordlg.ui:63
 #: plugins/logviewer/logprefwidget.ui:36
 #: plugins/scanfolder/scanfolderprefpage.ui:72
 #: plugins/syndication/filtereditor.ui:242
 #, kde-format
 msgid "Options"
 msgstr "選項"
 
 #. i18n: ectx: property (text), widget (QLabel, label)
 #. i18n: ectx: property (text), widget (QLabel, textLabel2)
 #: ktorrent/dialogs/fileselectdlg.ui:219 ktorrent/dialogs/pastedlgbase.ui:74
 #, kde-format
 msgid "Group:"
 msgstr "群組："
 
 #. i18n: ectx: property (text), widget (QCheckBox, m_chkStartTorrent)
 #: ktorrent/dialogs/fileselectdlg.ui:256
 #, kde-format
 msgid "Start torrent"
 msgstr "開始傳輸"
 
 #. i18n: ectx: property (toolTip), widget (QCheckBox, m_skip_data_check)
 #: ktorrent/dialogs/fileselectdlg.ui:267
 #, kde-format
 msgid ""
 "<p>When existing files have been found, skip the data check and assume that "
 "the files are fully downloaded.</p>\n"
 "<p><span style=\" font-weight:600;\">Note: </span>only do this when you are "
 "absolutely sure.</p>"
 msgstr ""
 "<p>當找到現有的檔案時，忽略資料檢查並假設檔案已完全下載。</p>\n"
 "<p><span style=\" font weight:600;\">注意：</span>只有在您完全確定的狀況下才"
 "這樣做。</p>"
 
 #. i18n: ectx: property (text), widget (QCheckBox, m_skip_data_check)
 #: ktorrent/dialogs/fileselectdlg.ui:270
 #, kde-format
 msgid "Skip data check if existing files are found"
 msgstr "若是找到現有檔案，則略過資料檢查"
 
 #. i18n: ectx: property (title), widget (QGroupBox, groupBox1)
 #: ktorrent/dialogs/fileselectdlg.ui:280
 #, kde-format
 msgid "Disk Space"
 msgstr "硬碟空間"
 
 #. i18n: ectx: property (text), widget (QLabel, textLabel1)
 #: ktorrent/dialogs/fileselectdlg.ui:288
 #, kde-format
 msgid "Required:"
 msgstr "需求："
 
 #. i18n: ectx: property (text), widget (QLabel, textLabel3)
 #: ktorrent/dialogs/fileselectdlg.ui:298
 #, kde-format
 msgid "Available:"
 msgstr "可用性："
 
 #. i18n: ectx: property (text), widget (QLabel, textLabel6)
 #: ktorrent/dialogs/fileselectdlg.ui:308
 #, kde-format
 msgid "After download:"
 msgstr "下載後:"
 
 #: ktorrent/dialogs/importdialog.cpp:227 ktorrent/dialogs/importdialog.cpp:259
 #, kde-format
 msgid "Cannot load the torrent file: %1"
 msgstr "無法載入 torrent 檔 ：%1"
 
 #: ktorrent/dialogs/importdialog.cpp:287 plugins/ipfilter/convertthread.cpp:70
 #: plugins/ipfilter/convertthread.cpp:166
 #: plugins/search/searchenginelist.cpp:195
 #, kde-format
 msgid "Cannot open %1: %2"
 msgstr "無法開啟 %1：%2"
 
 #: ktorrent/dialogs/importdialog.cpp:396 ktorrent/dialogs/importdialog.cpp:413
 #, kde-format
 msgid "Failed to create %1: %2"
 msgstr "無法建立 %1:%2"
 
 #. i18n: ectx: property (windowTitle), widget (QDialog, ImportDialog)
 #: ktorrent/dialogs/importdialog.ui:13
 #, kde-format
 msgid "Import an existing torrent"
 msgstr "匯入現有的 torrent 檔"
 
 #. i18n: ectx: property (text), widget (QLabel, textLabel1)
 #: ktorrent/dialogs/importdialog.ui:29
 #, kde-format
 msgid "Torrent:"
 msgstr "Torrent："
 
 #. i18n: ectx: property (text), widget (QLabel, textLabel2)
 #: ktorrent/dialogs/importdialog.ui:45
 #, kde-format
 msgid "Data:"
 msgstr "資料："
 
 #. i18n: ectx: property (text), widget (QLabel, label)
 #: ktorrent/dialogs/importdialog.ui:69
 #, kde-format
 msgid "Select the torrent file and the data which belongs with it."
 msgstr "選擇 torrent 檔，以及屬於它的資料。"
 
 #. i18n: ectx: property (text), widget (QPushButton, m_import_btn)
 #: ktorrent/dialogs/importdialog.ui:108
 #, kde-format
 msgid "&Import"
 msgstr "匯入(&I)"
 
 #. i18n: ectx: property (text), widget (QPushButton, m_cancel_btn)
 #: ktorrent/dialogs/importdialog.ui:115
 #, kde-format
 msgid "Ca&ncel"
 msgstr "取消(&N)"
 
 #: ktorrent/dialogs/missingfilesdlg.cpp:85
 #: ktorrent/dialogs/missingfilesdlg.cpp:123
 #, kde-format
 msgid "Select the directory where the data now is."
 msgstr "選擇目前資料所在的目錄"
 
 #: ktorrent/dialogs/missingfilesdlg.cpp:101
 #, kde-format
 msgid ""
 "The data files are not present in the location you selected. Do you want to "
 "create all the files in the selected directory?"
 msgstr "資料檔並沒有在您選取的目錄中。您要在選取的目錄中新建這些檔案嗎？"
 
 #: ktorrent/dialogs/missingfilesdlg.cpp:103
 #, kde-format
 msgid ""
 "Not all files were found in the new location; some are still missing. Do you "
 "want to create the missing files in the selected directory?"
 msgstr "新位置中並未找到所有的檔案。您要在選取的目錄新建這些找不到的檔案嗎？"
 
 #: ktorrent/dialogs/missingfilesdlg.cpp:137
 #, kde-format
 msgid ""
 "The data file is not present in the location you selected. Do you want to "
 "create the file in the selected directory?"
 msgstr "資料檔並沒有在您選取的目錄中。您要在選取的目錄中新建此檔嗎？"
 
 #. i18n: ectx: property (windowTitle), widget (QDialog, MissingFilesDlg)
 #: ktorrent/dialogs/missingfilesdlg.ui:14
 #, kde-format
 msgid "Files are missing"
 msgstr "檔案遺失"
 
 #. i18n: ectx: property (text), widget (QLabel, m_text)
 #: ktorrent/dialogs/missingfilesdlg.ui:20
 #, kde-format
 msgid "The following files are missing:"
 msgstr "遺失了以下檔案："
 
 #. i18n: ectx: property (toolTip), widget (QPushButton, m_recreate)
 #: ktorrent/dialogs/missingfilesdlg.ui:34
 #, kde-format
 msgid "They are no longer there, recreate them."
 msgstr "它們已經不在那裡了。重新建立它們。"
 
 #. i18n: ectx: property (text), widget (QPushButton, m_recreate)
 #: ktorrent/dialogs/missingfilesdlg.ui:37
 #, kde-format
 msgid "Recreate"
 msgstr "重建"
 
 #. i18n: ectx: property (toolTip), widget (QPushButton, m_dnd)
 #: ktorrent/dialogs/missingfilesdlg.ui:44
 #, kde-format
 msgid "Do not download the missing files."
 msgstr "不要下載遺失的檔案。"
 
 #. i18n: ectx: property (text), widget (QPushButton, m_dnd)
 #: ktorrent/dialogs/missingfilesdlg.ui:47
 #, kde-format
 msgid "Do Not Download"
 msgstr "不要下載"
 
 #. i18n: ectx: property (toolTip), widget (QPushButton, m_select_new)
 #: ktorrent/dialogs/missingfilesdlg.ui:54
 #, kde-format
 msgid "The files have been moved to another location, select the new location."
 msgstr "這些檔案已經移到它處。請選擇新的位置。"
 
 #. i18n: ectx: property (text), widget (QPushButton, m_select_new)
 #: ktorrent/dialogs/missingfilesdlg.ui:57
 #, kde-format
 msgid "Select New Location"
 msgstr "選擇新的位置"
 
 #. i18n: ectx: property (toolTip), widget (QPushButton, m_cancel)
 #: ktorrent/dialogs/missingfilesdlg.ui:77
 #, kde-format
 msgid "Cancel, do not start the torrent."
 msgstr "取消，不要開始 torrent。"
 
 #. i18n: ectx: property (text), widget (QPushButton, m_cancel)
 #. i18n: ectx: property (text), widget (QPushButton, cancel_button)
 #: ktorrent/dialogs/missingfilesdlg.ui:80 ktorrent/view/scanextender.ui:214
 #, kde-format
 msgid "Cancel"
 msgstr "取消"
 
 #. i18n: ectx: property (windowTitle), widget (QDialog, PasteDlgBase)
 #: ktorrent/dialogs/pastedialog.cpp:44 ktorrent/dialogs/pastedlgbase.ui:14
 #, kde-format
 msgid "Open an URL"
 msgstr "開啟網址"
 
 #: ktorrent/dialogs/pastedialog.cpp:115
 #: ktorrent/dialogs/torrentcreatordlg.cpp:262 ktorrent/gui.cpp:344
 #, kde-format
 msgid "Invalid URL: %1"
 msgstr "無效的URL: %1"
 
 #. i18n: ectx: property (text), widget (QLabel, textLabel1)
 #. i18n: ectx: property (text), widget (QLabel, label)
 #: ktorrent/dialogs/pastedlgbase.ui:22 plugins/syndication/feedwidget.ui:32
 #, kde-format
 msgid "URL:"
 msgstr "網址："
 
 #. i18n: ectx: property (text), widget (QCheckBox, m_silently)
 #. i18n: ectx: property (text), widget (QCheckBox, kcfg_openSilently)
 #: ktorrent/dialogs/pastedlgbase.ui:52
 #: plugins/scanfolder/scanfolderprefpage.ui:81
 #, kde-format
 msgid "Open silently"
 msgstr "無聲開啟"
 
 #. i18n: ectx: property (windowTitle), widget (QDialog, SpeedLimitsDlg)
 #: ktorrent/dialogs/speedlimitsdlg.cpp:52 ktorrent/dialogs/speedlimitsdlg.ui:14
 #: ktorrent/view/view.cpp:264
 #, kde-format
 msgid "Speed Limits"
 msgstr "速度限制"
 
 #. i18n: ectx: property (text), widget (QLabel, m_main_caption)
 #: ktorrent/dialogs/speedlimitsdlg.ui:20
 #, kde-format
 msgid "Speed limits for individual torrents (double click to edit):"
 msgstr "個別 torrent 的速度限制（雙擊可以編輯）："
 
 #. i18n: ectx: property (text), widget (QLabel, label)
 #: ktorrent/dialogs/speedlimitsdlg.ui:32
 #, kde-format
 msgid "Filter:"
 msgstr "過濾器："
 
 #. i18n: ectx: property (title), widget (QGroupBox, groupBox)
 #: ktorrent/dialogs/speedlimitsdlg.ui:61
 #, kde-format
 msgid "Global Limits"
 msgstr "全域限制"
 
 #. i18n: ectx: property (text), widget (QLabel, textLabel3)
 #. i18n: ectx: property (text), widget (QLabel, label_5)
 #. i18n: ectx: property (text), widget (QLabel, label_6)
 #: ktorrent/dialogs/speedlimitsdlg.ui:67 ktorrent/pref/networkpref.ui:111
 #: ktorrent/pref/recommendedsettingsdlg.ui:219
 #: plugins/bwscheduler/bwprefpage.ui:65
 #, kde-format
 msgid "Maximum download speed:"
 msgstr "最大下載速度："
 
 #. i18n: ectx: property (specialValueText), widget (QSpinBox, m_max_download_rate)
 #. i18n: ectx: property (specialValueText), widget (QSpinBox, m_max_upload_rate)
 #. i18n: ectx: property (specialValueText), widget (QDoubleSpinBox, m_max_seed_time)
 #. i18n: ectx: property (specialValueText), widget (QDoubleSpinBox, m_max_share_ratio)
 #. i18n: ectx: property (specialValueText), widget (QSpinBox, m_download_rate)
 #. i18n: ectx: property (specialValueText), widget (QSpinBox, m_upload_rate)
 #. i18n: ectx: property (specialValueText), widget (QSpinBox, kcfg_maxDownloads)
 #. i18n: ectx: property (specialValueText), widget (QSpinBox, kcfg_maxSeeds)
 #. i18n: ectx: property (specialValueText), widget (QDoubleSpinBox, kcfg_maxRatio)
 #. i18n: ectx: property (specialValueText), widget (QDoubleSpinBox, kcfg_maxSeedTime)
 #. i18n: ectx: property (specialValueText), widget (QDoubleSpinBox, kcfg_greenRatio)
 #. i18n: ectx: property (specialValueText), widget (QSpinBox, kcfg_maxConnections)
 #. i18n: ectx: property (specialValueText), widget (QSpinBox, kcfg_maxTotalConnections)
 #. i18n: ectx: property (specialValueText), widget (QSpinBox, kcfg_maxDownloadRate)
 #. i18n: ectx: property (specialValueText), widget (QSpinBox, kcfg_maxUploadRate)
 #. i18n: ectx: property (specialValueText), widget (QDoubleSpinBox, ratio_limit)
 #. i18n: ectx: property (specialValueText), widget (QDoubleSpinBox, time_limit)
 #. i18n: ectx: property (specialValueText), widget (QSpinBox, m_download_limit)
 #. i18n: ectx: property (specialValueText), widget (QSpinBox, m_upload_limit)
 #. i18n: ectx: property (specialValueText), widget (QSpinBox, m_ss_download_limit)
 #. i18n: ectx: property (specialValueText), widget (QSpinBox, m_ss_upload_limit)
 #. i18n: ectx: property (specialValueText), widget (QSpinBox, m_max_conn_per_torrent)
 #. i18n: ectx: property (specialValueText), widget (QSpinBox, m_max_conn_global)
 #. i18n: ectx: property (specialValueText), widget (QSpinBox, kcfg_screensaverUploadLimit)
 #. i18n: ectx: property (specialValueText), widget (QSpinBox, kcfg_screensaverDownloadLimit)
 #: ktorrent/dialogs/speedlimitsdlg.ui:77 ktorrent/dialogs/speedlimitsdlg.ui:100
 #: ktorrent/dialogs/speedlimitsmodel.cpp:140
 #: ktorrent/dialogs/speedlimitsmodel.cpp:145
 #: ktorrent/dialogs/spinboxdelegate.cpp:44 ktorrent/groups/grouppolicydlg.ui:81
 #: ktorrent/groups/grouppolicydlg.ui:101 ktorrent/groups/grouppolicydlg.ui:121
 #: ktorrent/groups/grouppolicydlg.ui:144 ktorrent/pref/networkpref.ui:81
 #: ktorrent/pref/networkpref.ui:101 ktorrent/pref/networkpref.ui:121
 #: ktorrent/pref/networkpref.ui:144 ktorrent/pref/qmpref.ui:45
 #: ktorrent/pref/qmpref.ui:65 ktorrent/pref/qmpref.ui:209
 #: ktorrent/pref/qmpref.ui:232 ktorrent/pref/qmpref.ui:261
 #: plugins/bwscheduler/bwprefpage.ui:52 plugins/bwscheduler/bwprefpage.ui:81
 #: plugins/bwscheduler/edititemdlg.ui:122
 #: plugins/bwscheduler/edititemdlg.ui:142
 #: plugins/bwscheduler/edititemdlg.ui:173
 #: plugins/bwscheduler/edititemdlg.ui:193
 #: plugins/bwscheduler/edititemdlg.ui:233
 #: plugins/bwscheduler/edititemdlg.ui:250 plugins/infowidget/statustab.cpp:71
 #: plugins/infowidget/statustab.ui:306 plugins/infowidget/statustab.ui:332
 #, kde-format
 msgid "No limit"
 msgstr "無限制"
 
 #. i18n: ectx: property (suffix), widget (QSpinBox, m_max_download_rate)
 #. i18n: ectx: property (suffix), widget (QSpinBox, m_max_upload_rate)
 #. i18n: ectx: property (suffix), widget (QSpinBox, m_download_rate)
 #. i18n: ectx: property (suffix), widget (QSpinBox, m_upload_rate)
 #. i18n: ectx: property (suffix), widget (QSpinBox, m_avg_speed_slot)
 #. i18n: ectx: property (suffix), widget (QSpinBox, kcfg_maxDownloadRate)
 #. i18n: ectx: property (suffix), widget (QSpinBox, kcfg_maxUploadRate)
 #. i18n: ectx: property (suffix), widget (QSpinBox, m_download_limit)
 #. i18n: ectx: property (suffix), widget (QSpinBox, m_upload_limit)
 #. i18n: ectx: property (suffix), widget (QSpinBox, m_ss_download_limit)
 #. i18n: ectx: property (suffix), widget (QSpinBox, m_ss_upload_limit)
 #. i18n: ectx: property (suffix), widget (QSpinBox, kcfg_screensaverUploadLimit)
 #. i18n: ectx: property (suffix), widget (QSpinBox, kcfg_screensaverDownloadLimit)
 #: ktorrent/dialogs/speedlimitsdlg.ui:80 ktorrent/dialogs/speedlimitsdlg.ui:103
 #: ktorrent/dialogs/spinboxdelegate.cpp:42 ktorrent/groups/grouppolicydlg.ui:84
 #: ktorrent/groups/grouppolicydlg.ui:104 ktorrent/pref/networkpref.ui:124
 #: ktorrent/pref/networkpref.ui:147 ktorrent/pref/recommendedsettingsdlg.ui:131
 #: plugins/bwscheduler/bwprefpage.ui:55 plugins/bwscheduler/bwprefpage.ui:84
 #: plugins/bwscheduler/edititemdlg.ui:125
 #: plugins/bwscheduler/edititemdlg.ui:145
 #: plugins/bwscheduler/edititemdlg.ui:176
 #: plugins/bwscheduler/edititemdlg.ui:196
 #, kde-format
 msgid " KiB/s"
 msgstr " KB/秒"
 
 #. i18n: ectx: property (text), widget (QLabel, textLabel2)
 #. i18n: ectx: property (text), widget (QLabel, label_4)
 #. i18n: ectx: property (text), widget (QLabel, label_5)
 #. i18n: ectx: property (text), widget (QLabel, label)
 #: ktorrent/dialogs/speedlimitsdlg.ui:90 ktorrent/pref/networkpref.ui:134
 #: ktorrent/pref/recommendedsettingsdlg.ui:205
 #: plugins/bwscheduler/bwprefpage.ui:36
 #, kde-format
 msgid "Maximum upload speed:"
 msgstr "最大上傳速度:"
 
 #: ktorrent/dialogs/speedlimitsmodel.cpp:112
 #: plugins/shutdown/shutdowntorrentmodel.cpp:155
 #: plugins/syndication/feedwidgetmodel.cpp:95
 #, kde-format
 msgid "Torrent"
 msgstr "Torrent"
 
 #: ktorrent/dialogs/speedlimitsmodel.cpp:113
 #, kde-format
 msgid "Download Limit"
 msgstr "下載速度限制"
 
 #: ktorrent/dialogs/speedlimitsmodel.cpp:114
 #, kde-format
 msgid "Upload Limit"
 msgstr "上傳速度限制"
 
 #: ktorrent/dialogs/speedlimitsmodel.cpp:115
 #, kde-format
 msgid "Assured Download Speed"
 msgstr "確定下載速度"
 
 #: ktorrent/dialogs/speedlimitsmodel.cpp:116
 #, kde-format
 msgid "Assured Upload Speed"
 msgstr "確定上傳速度"
 
 #: ktorrent/dialogs/speedlimitsmodel.cpp:150
 #: ktorrent/dialogs/speedlimitsmodel.cpp:155
 #: ktorrent/dialogs/spinboxdelegate.cpp:46
 #, kde-format
 msgid "No assured speed"
 msgstr "沒有確定的速度"
 
 #: ktorrent/dialogs/torrentcreatordlg.cpp:52
 #, kde-format
 msgid "Create A Torrent"
 msgstr "建立 torrent"
 
 #: ktorrent/dialogs/torrentcreatordlg.cpp:268
 #, kde-format
 msgid "Only HTTP is supported for webseeding."
 msgstr "webseeding 只支援 HTTP。"
 
 #: ktorrent/dialogs/torrentcreatordlg.cpp:296
 #, kde-format
 msgid "You must select a file or a folder."
 msgstr "請指定一個檔案或資料夾."
 
 #: ktorrent/dialogs/torrentcreatordlg.cpp:302
 #, kde-format
 msgid ""
 "You have not added a tracker, are you sure you want to create this torrent?"
 msgstr "您尚未新增追蹤器。您確定要建立此 torrent 嗎？"
 
 #: ktorrent/dialogs/torrentcreatordlg.cpp:310
 #, kde-format
 msgid "You must add at least one node."
 msgstr "您必須新增至少一個節點。"
 
 #: ktorrent/dialogs/torrentcreatordlg.cpp:376
 #, kde-format
 msgid "Choose a file to save the torrent"
 msgstr "選擇要儲存的 torrent"
 
 #. i18n: ectx: property (windowTitle), widget (QDialog, TorrentCreatorDlg)
 #: ktorrent/dialogs/torrentcreatordlg.ui:14
 #, kde-format
 msgid "Create a torrent"
 msgstr "建立 torrent"
 
 #. i18n: ectx: property (title), widget (QGroupBox, groupBox)
 #: ktorrent/dialogs/torrentcreatordlg.ui:20
 #, kde-format
 msgid "File or directory to create torrent from:"
 msgstr "要建立 torrent 的檔案或目錄："
 
 #. i18n: ectx: property (text), widget (QRadioButton, m_selectDirectory)
 #: ktorrent/dialogs/torrentcreatordlg.ui:44
 #, kde-format
 msgid "Select Directory"
 msgstr "選擇目錄"
 
 #. i18n: ectx: property (text), widget (QRadioButton, m_selectFile)
 #: ktorrent/dialogs/torrentcreatordlg.ui:51
 #, kde-format
 msgid "Select File"
 msgstr "選擇檔案"
 
 #. i18n: ectx: property (text), widget (QLabel, label_2)
 #: ktorrent/dialogs/torrentcreatordlg.ui:71
 #, kde-format
 msgid "Size of each chunk:"
 msgstr "每個區塊的大小"
 
 #. i18n: ectx: property (text), item, widget (QComboBox, m_chunk_size)
 #: ktorrent/dialogs/torrentcreatordlg.ui:82
 #, kde-format
 msgid "32 KiB"
 msgstr "32 KB"
 
 #. i18n: ectx: property (text), item, widget (QComboBox, m_chunk_size)
 #: ktorrent/dialogs/torrentcreatordlg.ui:87
 #, kde-format
 msgid "64 KiB"
 msgstr "64 KB"
 
 #. i18n: ectx: property (text), item, widget (QComboBox, m_chunk_size)
 #: ktorrent/dialogs/torrentcreatordlg.ui:92
 #, kde-format
 msgid "128 KiB"
 msgstr "128 KB"
 
 #. i18n: ectx: property (text), item, widget (QComboBox, m_chunk_size)
 #: ktorrent/dialogs/torrentcreatordlg.ui:97
 #, kde-format
 msgid "256 KiB"
 msgstr "256 KB"
 
 #. i18n: ectx: property (text), item, widget (QComboBox, m_chunk_size)
 #: ktorrent/dialogs/torrentcreatordlg.ui:102
 #, kde-format
 msgid "512 KiB"
 msgstr "512 KB"
 
 #. i18n: ectx: property (text), item, widget (QComboBox, m_chunk_size)
 #: ktorrent/dialogs/torrentcreatordlg.ui:107
 #, kde-format
 msgid "1 MiB"
 msgstr "1 MB"
 
 #. i18n: ectx: property (text), item, widget (QComboBox, m_chunk_size)
 #: ktorrent/dialogs/torrentcreatordlg.ui:112
 #, kde-format
 msgid "2 MiB"
 msgstr "2 MB"
 
 #. i18n: ectx: property (text), item, widget (QComboBox, m_chunk_size)
 #: ktorrent/dialogs/torrentcreatordlg.ui:117
 #, kde-format
 msgid "4 MiB"
 msgstr "4 MB"
 
 #. i18n: ectx: property (text), item, widget (QComboBox, m_chunk_size)
 #: ktorrent/dialogs/torrentcreatordlg.ui:122
 #, kde-format
 msgid "8 MiB"
 msgstr "8 MB"
 
 #. i18n: ectx: property (text), widget (QCheckBox, m_start_seeding)
 #: ktorrent/dialogs/torrentcreatordlg.ui:132
 #, kde-format
 msgid "Start seeding"
 msgstr "開始播種"
 
 #. i18n: ectx: property (text), widget (QCheckBox, m_private)
 #: ktorrent/dialogs/torrentcreatordlg.ui:142
 #, kde-format
 msgid "Private torrent (DHT not allowed)"
 msgstr "私密的 torrent（不允許 DHT）"
 
 #. i18n: ectx: property (text), widget (QCheckBox, m_dht)
 #: ktorrent/dialogs/torrentcreatordlg.ui:149
 #, kde-format
 msgid "Decentralized (DHT only)"
 msgstr "分散式（只使用 DHT）"
 
 #. i18n: ectx: property (text), widget (QLabel, label_6)
 #. i18n: ectx: property (text), widget (QCheckBox, kcfg_addToGroup)
 #: ktorrent/dialogs/torrentcreatordlg.ui:158
 #: plugins/scanfolder/scanfolderprefpage.ui:125
 #, kde-format
 msgid "Add torrent to group:"
 msgstr "將 torrent 加入到群組："
 
 #. i18n: ectx: attribute (title), widget (QWidget, m_tracker_tab)
 #: ktorrent/dialogs/torrentcreatordlg.ui:177
 #: plugins/infowidget/infowidgetplugin.cpp:268
 #: plugins/scripting/scripts/tracker_groups/tracker_groups.py:59
 #, kde-format
 msgid "Trackers"
 msgstr "追蹤器"
 
 #. i18n: ectx: property (text), widget (QPushButton, m_remove_tracker)
 #. i18n: ectx: property (text), widget (QPushButton, m_remove_node)
 #. i18n: ectx: property (text), widget (QPushButton, m_remove_webseed)
 #. i18n: ectx: property (text), widget (QPushButton, m_remove)
 #: ktorrent/dialogs/torrentcreatordlg.ui:198
 #: ktorrent/dialogs/torrentcreatordlg.ui:304
 #: ktorrent/dialogs/torrentcreatordlg.ui:348 ktorrent/ipfilterwidget.ui:65
 #: plugins/mediaplayer/playlistwidget.cpp:53
 #: plugins/syndication/managefiltersdlg.ui:67
 #, kde-format
 msgid "Remove"
 msgstr "移除"
 
 #. i18n: ectx: property (text), widget (QPushButton, m_move_up)
 #: ktorrent/dialogs/torrentcreatordlg.ui:205
 #: ktorrent/tools/queuemanagerwidget.cpp:78
 #, kde-format
 msgid "Move Up"
 msgstr "上移"
 
 #. i18n: ectx: property (text), widget (QPushButton, m_move_down)
 #: ktorrent/dialogs/torrentcreatordlg.ui:212
 #: ktorrent/tools/queuemanagerwidget.cpp:81
 #, kde-format
 msgid "Move Down"
 msgstr "下移"
 
 #. i18n: ectx: attribute (title), widget (QWidget, m_dht_tab)
 #: ktorrent/dialogs/torrentcreatordlg.ui:235
 #, kde-format
 msgid "DHT Nodes"
 msgstr "DHT 節點"
 
 #. i18n: ectx: property (text), widget (QLabel, label_3)
 #: ktorrent/dialogs/torrentcreatordlg.ui:243
 #, kde-format
 msgid "Node:"
 msgstr "節點："
 
 #. i18n: ectx: property (text), widget (QTreeWidget, m_node_list)
 #: ktorrent/dialogs/torrentcreatordlg.ui:289
 #, kde-format
 msgid "IP or Hostname"
 msgstr "IP 或主機名稱"
 
 #. i18n: ectx: label, entry (port), group (downloads)
 #. i18n: ectx: label, entry (udpTrackerPort), group (downloads)
 #. i18n: ectx: property (text), widget (QTreeWidget, m_node_list)
 #: ktorrent/dialogs/torrentcreatordlg.ui:294 libktcore/ktorrent.kcfg:54
 #: libktcore/ktorrent.kcfg:60
 #, kde-format
 msgid "Port"
 msgstr "連接埠"
 
 #. i18n: ectx: attribute (title), widget (QWidget, tab_2)
 #: ktorrent/dialogs/torrentcreatordlg.ui:327
 #, kde-format
 msgid "Web Seeds"
 msgstr "網頁種子"
 
 #. i18n: ectx: property (text), widget (QLabel, label_5)
 #. i18n: ectx: property (text), widget (QLabel, label_17)
 #: ktorrent/dialogs/torrentcreatordlg.ui:376
 #: plugins/infowidget/statustab.ui:140
 #, kde-format
 msgid "Comments:"
 msgstr "註解："
 
 #: ktorrent/groups/grouppolicydlg.cpp:34
 #, kde-format
 msgid "Policy for the %1 group"
 msgstr "群組 %1 的政策"
 
 #. i18n: ectx: property (toolTip), widget (QCheckBox, m_default_location_enabled)
 #. i18n: ectx: property (toolTip), widget (KUrlRequester, m_default_location)
 #: ktorrent/groups/grouppolicydlg.ui:32 ktorrent/groups/grouppolicydlg.ui:42
 #, kde-format
 msgid ""
 "Default save location for torrents from this group. <br/><br/>This is only "
 "used in the file selection dialog, when you change the group, the download "
 "location in the dialog will be set to this. You can still override it, if "
 "you want to."
 msgstr ""
 "此群組中的 torrents 預設的儲存位置。<br/><br/> 這只用於檔案選擇對話框。當您變"
 "更群組時，對話框中的下載位置會換成這個設定。要的話您還是可以覆蓋此設定。"
 
 #. i18n: ectx: property (text), widget (QCheckBox, m_default_location_enabled)
 #. i18n: ectx: property (text), widget (QCheckBox, kcfg_useSaveDir)
 #: ktorrent/groups/grouppolicydlg.ui:35 ktorrent/pref/generalpref.ui:40
 #, kde-format
 msgid "Default save location:"
 msgstr "預設儲存位置："
 
 #. i18n: ectx: property (text), widget (QCheckBox, m_default_move_on_completion_enabled)
 #: ktorrent/groups/grouppolicydlg.ui:49
 #, kde-format
 msgid "Default move when completed location:"
 msgstr "預設的完成的下載儲存位置："
 
 #. i18n: ectx: property (toolTip), widget (KUrlRequester, m_default_move_on_completion_location)
 #: ktorrent/groups/grouppolicydlg.ui:56
 #, kde-format
 msgid ""
 "Default move on completion location for torrents from this group. <br/><br/"
 ">This is only used in the file selection dialog, when you change the group, "
 "the move when completed location in the dialog will be set to this. You can "
 "still override it, if you want to."
 msgstr ""
 "此群組中的 torrents 預設的完成後移動目的位置。<br/><br/> 這只用於檔案選擇對話"
 "框。當您變更群組時，對話框中的移動目的位置會換成這個設定。要的話您還是可以覆"
 "蓋此設定。"
 
 #. i18n: ectx: property (toolTip), widget (QGroupBox, groupBox)
 #: ktorrent/groups/grouppolicydlg.ui:63
 #, kde-format
 msgid "Default settings for torrents which are added to the group."
 msgstr "Torrents 加入此群組時的預設設定。"
 
 #. i18n: ectx: property (title), widget (QGroupBox, groupBox)
 #: ktorrent/groups/grouppolicydlg.ui:66
 #, kde-format
 msgid "Torrent Limits"
 msgstr "Torrent 限制"
 
 #. i18n: ectx: property (text), widget (QLabel, label)
 #: ktorrent/groups/grouppolicydlg.ui:74
 #, kde-format
 msgid "Maximum download rate:"
 msgstr "最大下載速度："
 
 #. i18n: ectx: property (text), widget (QLabel, label_2)
 #: ktorrent/groups/grouppolicydlg.ui:94
 #, kde-format
 msgid "Maximum upload rate:"
 msgstr "最大上傳速度："
 
 #. i18n: ectx: property (text), widget (QLabel, label_3)
 #: ktorrent/groups/grouppolicydlg.ui:114
 #, kde-format
 msgid "Maximum seed time:"
 msgstr "最大播種時間："
 
 #. i18n: ectx: property (suffix), widget (QDoubleSpinBox, m_max_seed_time)
 #. i18n: ectx: property (suffix), widget (QDoubleSpinBox, time_limit)
 #: ktorrent/groups/grouppolicydlg.ui:124 plugins/infowidget/statustab.ui:335
 #, kde-format
 msgid " Hours"
 msgstr " 小時"
 
 #. i18n: ectx: property (text), widget (QLabel, label_4)
 #: ktorrent/groups/grouppolicydlg.ui:137
 #, kde-format
 msgid "Maximum share ratio:"
 msgstr "最大分享比例："
 
 #. i18n: ectx: property (toolTip), widget (QCheckBox, m_only_new)
 #: ktorrent/groups/grouppolicydlg.ui:160
 #, kde-format
 msgid ""
 "When this is enabled, these settings will only be applied when a torrent is "
 "added to the group in the file selection dialog or the torrent creation "
 "dialog.<p>\n"
 "If this is not enabled, the settings will always be applied when you add a "
 "torrent to this group. "
 msgstr ""
 "開啟此選項時，這些設定只會在透過檔案選擇對話框將 torrent 加入此群組時，或是在"
 "新建 torrent 時套用。<p>\n"
 "反之，這些設定將套用到所有新加入此群組的 torrent。<p>"
 
 #. i18n: ectx: property (text), widget (QCheckBox, m_only_new)
 #: ktorrent/groups/grouppolicydlg.ui:163
 #, kde-format
 msgid "Apply settings only for newly opened or created torrents"
 msgstr "只對新開啟或建立的 torrent 套用設定"
 
 #: ktorrent/groups/groupswitcher.cpp:60
 #, kde-format
 msgid "Open a new tab"
 msgstr "開啟新分頁"
 
 #: ktorrent/groups/groupswitcher.cpp:65
 #, kde-format
 msgid "Close the current tab"
 msgstr "關閉目前分頁"
 
 #: ktorrent/groups/groupswitcher.cpp:70
 #, kde-format
 msgid "Edit Group Policy"
 msgstr "編輯群組政策"
 
 #: ktorrent/groups/groupview.cpp:83
 #, kde-format
 msgid "Open In New Tab"
 msgstr "在新分頁開啟"
 
 #: ktorrent/groups/groupview.cpp:87 ktorrent/view/view.cpp:229
 #, kde-format
 msgid "New Group"
 msgstr "建立新群組"
 
 #: ktorrent/groups/groupview.cpp:91
 #, kde-format
 msgid "Edit Name"
 msgstr "編輯名稱"
 
 #: ktorrent/groups/groupview.cpp:95
 #, kde-format
 msgid "Remove Group"
 msgstr "移除群組"
 
 #: ktorrent/groups/groupview.cpp:99
 #, kde-format
 msgid "Group Policy"
 msgstr "群組政策"
 
 #: ktorrent/groups/groupview.cpp:112
 #, kde-format
 msgid "Please enter the group name."
 msgstr "請輸入群組名稱:"
 
 #: ktorrent/groups/groupview.cpp:119
 #, kde-format
 msgid "The group %1 already exists."
 msgstr "群組 %1 已存在"
 
 #: ktorrent/groups/groupviewmodel.cpp:48
 #, kde-format
 msgid "Custom Groups"
 msgstr "自定群組"
 
 #: ktorrent/gui.cpp:289
 #, kde-format
 msgid "Open Location"
 msgstr "開啟位置"
 
 #: ktorrent/gui.cpp:393
 #, kde-format
 msgid "Create a new torrent"
 msgstr "建立新的 torrent"
 
 #: ktorrent/gui.cpp:395
 #, kde-format
 msgid "Open a torrent"
 msgstr "開啟 torrent"
 
 #: ktorrent/gui.cpp:398
 #, kde-format
 msgid "Open Silently"
 msgstr "無聲地開啟"
 
 #: ktorrent/gui.cpp:399
 #, kde-format
 msgid "Open a torrent without asking any questions"
 msgstr "開啟 torrent 時不詢問任何問題。"
 
 #: ktorrent/gui.cpp:414
 #, kde-format
 msgid "Open URL"
 msgstr "開啟網址"
 
 #: ktorrent/gui.cpp:415
 #, kde-format
 msgid "Open a URL which points to a torrent, magnet links are supported"
 msgstr "開啟指向一個 torrent 的網址，magnet 連結亦支援"
 
 #: ktorrent/gui.cpp:420 plugins/ipfilter/ipblockingprefpage.cpp:37
 #: plugins/ipfilter/ipfilterplugin.cpp:63
 #: plugins/ipfilter/ipfilterplugin.cpp:76
 #, kde-format
 msgid "IP Filter"
 msgstr "IP 過濾"
 
 #: ktorrent/gui.cpp:421
 #, kde-format
 msgid "Show the list of blocked IP addresses"
 msgstr "顯示被阻擋 IP 位址列表"
 
 #: ktorrent/gui.cpp:426
 #, kde-format
 msgid "Import Torrent"
 msgstr "匯入 Torrent"
 
 #: ktorrent/gui.cpp:427
 #, kde-format
 msgid "Import a torrent"
 msgstr "匯入 Torrent"
 
 #: ktorrent/gui.cpp:432
 #, kde-format
 msgid "Show/Hide KTorrent"
 msgstr "顯示/隱藏 KTorrent"
 
 #: ktorrent/gui.cpp:452
 #, kde-format
 msgid "D: %1 | U: %2"
 msgstr "D: %1 | U: %2"
 
 #: ktorrent/ipfilterwidget.cpp:56
 #, kde-format
 msgid "IP Filter List"
 msgstr "IP 過濾清單"
 
 #: ktorrent/ipfilterwidget.cpp:110
 #, kde-format
 msgid ""
 "Invalid IP address <b>%1</b>. IP addresses must be in the format 'XXX.XXX."
 "XXX.XXX'.<br/><br/>You can also use wildcards like '127.0.0.*' or specify "
 "ranges like '200.10.10.0-200.10.10.40'."
 msgstr ""
 "IP 位址 <b>%1</b> 不合法。您必須用以下格式輸入IP :\"XXX.XXX.XXX.XXX\"。<br/"
 "><br/> 您可以利用萬用字元來表示一個範圍 - 如 \"127.0.0.*\" 或 "
 "\"200.10.10.0-200.10.10.40\""
 
 #: ktorrent/ipfilterwidget.cpp:138
 #, kde-format
 msgid "Choose a file"
 msgstr "選擇檔案"
 
 #: ktorrent/ipfilterwidget.cpp:139 ktorrent/ipfilterwidget.cpp:152
 #, kde-format
 msgid "Text files"
 msgstr "文字檔"
 
 #: ktorrent/ipfilterwidget.cpp:151
 #, kde-format
 msgid "Choose a filename to save under"
 msgstr "請為將要儲存的檔案命名"
 
 #. i18n: ectx: property (windowTitle), widget (QDialog, IPFilterWidget)
 #: ktorrent/ipfilterwidget.ui:14
 #, kde-format
 msgid "KTorrent Blacklisted Peers"
 msgstr "KTorrent 黑名單端點"
 
 #. i18n: ectx: property (text), widget (QLabel, label)
 #: ktorrent/ipfilterwidget.ui:22
 #, kde-format
 msgid "Add peer:"
 msgstr "新增端點："
 
 #. i18n: ectx: property (toolTip), widget (QLineEdit, m_ip_to_add)
 #: ktorrent/ipfilterwidget.ui:31
 #, kde-format
 msgid ""
 "IP addresses must be in the format 'XXX.XXX.XXX.XXX'.\n"
 "                                        \n"
 "You can also use wildcards like '127.0.0.*' or specify ranges like "
 "'200.10.10.0-200.10.10.40'."
 msgstr ""
 "您必須用以下格式輸入IP :\"XXX.XXX.XXX.XXX\"。\n"
 "您可以利用萬用字元來表示一個範圍，如 \"127.0.0.*\"，或是 "
 "\"200.10.10.0-200.10.10.40\"。"
 
 #. i18n: ectx: property (text), widget (QPushButton, m_clear)
 #: ktorrent/ipfilterwidget.ui:72
 #, kde-format
 msgid "Clear"
 msgstr "清除"
 
 #. i18n: ectx: property (text), widget (QPushButton, m_open)
 #: ktorrent/ipfilterwidget.ui:92
 #, kde-format
 msgid "Open..."
 msgstr "開啟..."
 
 #. i18n: ectx: property (text), widget (QPushButton, m_save_as)
 #: ktorrent/ipfilterwidget.ui:99
 #, kde-format
 msgid "Save As..."
 msgstr "另存為..."
 
 #. i18n: ectx: Menu (file)
 #: ktorrent/ktorrentui.rc:4
 #, kde-format
 msgid "&File"
 msgstr "檔案(&F)"
 
 #. i18n: ectx: Menu (view)
 #: ktorrent/ktorrentui.rc:15
 #, kde-format
 msgid "&View"
 msgstr "檢視(&V)"
 
 #. i18n: ectx: ToolBar (mainToolBar)
 #: ktorrent/ktorrentui.rc:24
 #, kde-format
 msgid "Main"
 msgstr "主要"
 
 #. i18n: ectx: Menu (Torrents)
 #. i18n: ectx: ToolBar (TorrentsToolBar)
 #: ktorrent/kttorrentactivityui.rc:7 ktorrent/kttorrentactivityui.rc:83
 #: ktorrent/torrentactivity.cpp:55
 #, kde-format
 msgid "Torrents"
 msgstr "Torrent"
 
 #. i18n: ectx: Menu (GroupsMenu)
 #: ktorrent/kttorrentactivityui.rc:26
 #, kde-format
 msgid "Groups"
 msgstr "群組"
 
 #. i18n: ectx: Menu (ViewMenu)
 #: ktorrent/kttorrentactivityui.rc:39
 #, kde-format
 msgid "View"
 msgstr "檢視"
 
 #. i18n: ectx: Menu (AdvancedMenu)
 #. i18n: ectx: property (title), widget (QGroupBox, groupBox_2)
 #: ktorrent/kttorrentactivityui.rc:54 ktorrent/pref/advancedpref.cpp:29
 #: ktorrent/pref/networkpref.ui:160
 #, kde-format
 msgid "Advanced"
 msgstr "進階"
 
 #. i18n: ectx: Menu (OpenDirMenu)
 #: ktorrent/kttorrentactivityui.rc:62 ktorrent/view/view.cpp:250
 #, kde-format
 msgid "Open Directory"
 msgstr "開啟目錄"
 
 #. i18n: ectx: Menu (GroupsSubMenu)
 #: ktorrent/kttorrentactivityui.rc:68 ktorrent/view/view.cpp:253
 #, kde-format
 msgid "Add to Group"
 msgstr "加入到群組"
 
 #. i18n: ectx: Menu (ColumnsMenu)
 #: ktorrent/kttorrentactivityui.rc:76
 #, kde-format
 msgid "Configure Columns"
 msgstr "設定欄位"
 
 #. i18n: ectx: Menu (ColumnsMenu)
 #: ktorrent/kttorrentactivityui.rc:77 ktorrent/view/view.cpp:98
 #, kde-format
 msgid "Columns"
 msgstr "欄"
 
 #: ktorrent/main.cpp:117
 #, kde-format
 msgctxt "@title"
 msgid "KTorrent"
 msgstr "KTorrent"
 
 #: ktorrent/main.cpp:117
 #, kde-format
 msgid "Bittorrent client by KDE"
 msgstr "來自 KDE 的 Bittorent 客戶端"
 
 #: ktorrent/main.cpp:118
 #, kde-format
 msgctxt "@info:credit"
 msgid "(C) 2005 - 2011 Joris Guisson and Ivan Vasic"
 msgstr "(C) 2005 - 2011 Joris Guisson 和 Ivan Vasic"
 
 #: ktorrent/main.cpp:124
 #, kde-format
 msgid "Joris Guisson"
 msgstr "Joris Guisson"
 
 #: ktorrent/main.cpp:125
 #, kde-format
 msgid "Ivan Vasic"
 msgstr "Ivan Vasic"
 
 #: ktorrent/main.cpp:126
 #, kde-format
 msgid "Alan Jones"
 msgstr "Alan Jones"
 
 #: ktorrent/main.cpp:126
 #, kde-format
 msgid "BitFinder Plugin"
 msgstr "BitFinder 外掛程式"
 
 #: ktorrent/main.cpp:127
 #, kde-format
 msgid "Diego Rosario Brogna"
 msgstr "Diego Rosario Brogna"
 
 #: ktorrent/main.cpp:127
 #, kde-format
 msgid "Webinterface Plugin, global max share ratio patch"
 msgstr "Web 介面外掛程式，全域最大分享率限制修補程式"
 
 #: ktorrent/main.cpp:128
 #, kde-format
 msgid "Krzysztof Kundzicz"
 msgstr "Krzysztof Kundzicz "
 
 #: ktorrent/main.cpp:128
 #, kde-format
 msgid "Statistics Plugin"
 msgstr "統計外掛程式"
 
 #: ktorrent/main.cpp:129
 #, kde-format
 msgid "Christian Weilbach"
 msgstr "Christian Weilbach"
 
 #: ktorrent/main.cpp:129
 #, kde-format
 msgid "kio-magnet"
 msgstr "kio-magnet"
 
 #: ktorrent/main.cpp:130
 #, kde-format
 msgid "Mladen Babic"
 msgstr "Mladen Babic"
 
 #: ktorrent/main.cpp:130
 #, kde-format
 msgid "Application icon and a couple of others"
 msgstr "本程式和另外一些的圖示"
 
 #: ktorrent/main.cpp:131
 #, kde-format
 msgid "Adam Treat"
 msgstr "Adam Treat"
 
 #: ktorrent/main.cpp:132
 #, kde-format
 msgid "Danny Allen"
 msgstr "Danny Allen"
 
 #: ktorrent/main.cpp:132
 #, kde-format
 msgid "1.0 application icon"
 msgstr "1.0 版本的圖示"
 
 #: ktorrent/main.cpp:133
 #, kde-format
 msgid "Vincent Wagelaar"
 msgstr "Vincent Wagelaar"
 
 #: ktorrent/main.cpp:134
 #, kde-format
 msgid "Knut Morten Johansson"
 msgstr "Knut Morten Johansson"
 
 #: ktorrent/main.cpp:135
 #, kde-format
 msgid "Felix Berger"
 msgstr "Felix Berger"
 
 #: ktorrent/main.cpp:135
 #, kde-format
 msgid "ChunkBar's tooltip and IWFileTreeItem sorting"
 msgstr "區塊列的工具提示，IWFileTreeItem 排序"
 
 #: ktorrent/main.cpp:136
 #, kde-format
 msgid "Andreas Kling"
 msgstr "Andreas Kling"
 
 #: ktorrent/main.cpp:137
 #, kde-format
 msgid "Felipe Sateler"
 msgstr "Felipe Sateler"
 
 #: ktorrent/main.cpp:138
 #, kde-format
 msgid "Maxmind"
 msgstr "Maxmind"
 
 #: ktorrent/main.cpp:138
 #, kde-format
 msgid ""
 "Country locator for InfoWidget plugin. Flags are taken from http://flags."
 "blogpotato.de/ so thanks to them too."
 msgstr ""
 "InfoWidget 外掛程式的國家定位器。旗幟的圖案是從 http://flags.blogpotato.de/ "
 "來的，在此一併致謝。"
 
 #: ktorrent/main.cpp:139
 #, kde-format
 msgid "Adam Forsyth"
 msgstr "Adam Forsyth"
 
 #: ktorrent/main.cpp:139
 #, kde-format
 msgid "File prioritization and some other patches"
 msgstr "檔案優先權，以及一些其它的修補"
 
 #: ktorrent/main.cpp:140
 #, kde-format
 msgid "Thomas Bernard"
 msgstr "Thomas Bernard"
 
 #: ktorrent/main.cpp:140
 #, kde-format
 msgid "Miniupnp was used as an example for our own UPnP implementation"
 msgstr "Miniupnp 是用作我們自己的 UPnP 實作的範例"
 
 #: ktorrent/main.cpp:141
 #, kde-format
 msgid "Lesly Weyts"
 msgstr "Lesly Weyts"
 
 #: ktorrent/main.cpp:141 ktorrent/main.cpp:142
 #, kde-format
 msgid "Zeroconf enhancements"
 msgstr "Zeroconf 的改進"
 
 #: ktorrent/main.cpp:142
 #, kde-format
 msgid "Kevin Andre"
 msgstr "Kevin Andre"
 
 #: ktorrent/main.cpp:143
 #, kde-format
 msgid "Dagur Valberg Johannsson"
 msgstr "Dagur Valberg Johannsson"
 
 #: ktorrent/main.cpp:143
 #, kde-format
 msgid "Coldmilk webgui"
 msgstr "Coldmilk 網頁介面"
 
 #: ktorrent/main.cpp:144
 #, kde-format
 msgid "Alexander Dymo"
 msgstr "Alexander Dymo"
 
 #: ktorrent/main.cpp:144
 #, kde-format
 msgid "IDEAl code from KDevelop"
 msgstr "從 KDevelop 取得 IDEA1 程式碼"
 
 #: ktorrent/main.cpp:145
 #, kde-format
 msgid "Scott Wolchok"
 msgstr "Scott Wolchok"
 
 #: ktorrent/main.cpp:145
 #, kde-format
 msgid "Conversion speed improvement in ipfilter plugin"
 msgstr "在 ipfilter 外掛程式中轉換改進速度"
 
 #: ktorrent/main.cpp:146
 #, kde-format
 msgid "Bryan Burns of Juniper Networks"
 msgstr "Juniper Networks 的 Bryan Burns"
 
 #: ktorrent/main.cpp:146
 #, kde-format
 msgid "Discovered 2 security vulnerabilities (both are fixed)"
 msgstr "發現兩個安全問題 (已修正)"
 
 #: ktorrent/main.cpp:147
 #, kde-format
 msgid "Goten Xiao"
 msgstr "Goten Xiao"
 
 #: ktorrent/main.cpp:147
 #, kde-format
 msgid "Patch to load silently with a save location"
 msgstr "載入儲存位置的修補程式"
 
 #: ktorrent/main.cpp:148
 #, kde-format
 msgid "Rapsys"
 msgstr "Rapsys"
 
 #: ktorrent/main.cpp:148
 #, kde-format
 msgid "Fixes in PHP code of webinterface"
 msgstr "網頁介面中的 PHP 程式碼修正"
 
 #: ktorrent/main.cpp:149
 #, kde-format
 msgid "Athantor"
 msgstr "Athantor"
 
 #: ktorrent/main.cpp:149
 #, kde-format
 msgid "XFS specific disk preallocation"
 msgstr "XFS 中磁碟空間預先配置"
 
 #: ktorrent/main.cpp:150
 #, kde-format
 msgid "twisted_fall"
 msgstr "twisted_fall"
 
 #: ktorrent/main.cpp:150
 #, kde-format
 msgid "Patch to not show very low speeds"
 msgstr "修補程式，在極低速時不要顯示"
 
 #: ktorrent/main.cpp:151
 #, kde-format
 msgid "Lucke"
 msgstr "Lucke"
 
 #: ktorrent/main.cpp:151
 #, kde-format
 msgid "Patch to show potentially firewalled status"
 msgstr "顯示可能的防火牆狀態的修補程式"
 
 #: ktorrent/main.cpp:152
 #, kde-format
 msgid "Modestas Vainius"
 msgstr "Modestas Vainius"
 
 #: ktorrent/main.cpp:152
 #, kde-format
 msgid "Several patches"
 msgstr "一些修補程式"
 
 #: ktorrent/main.cpp:153
 #, kde-format
 msgid "Stefan Monov"
 msgstr "Stefan Monov"
 
 #: ktorrent/main.cpp:153
 #, kde-format
 msgid "Patch to hide menu bar"
 msgstr "隱藏選單列的修補程式"
 
 #: ktorrent/main.cpp:154
 #, kde-format
 msgid "The_Kernel"
 msgstr "The_Kernel"
 
 #: ktorrent/main.cpp:154
 #, kde-format
 msgid "Patch to change file priorities in the webgui"
 msgstr "在網頁介面中改變檔案優先權的修補程式"
 
 #: ktorrent/main.cpp:155
 #, kde-format
 msgid "Rafał Miłecki"
 msgstr "Rafał Miłecki"
 
 #: ktorrent/main.cpp:155
 #, kde-format
 msgid "Several webgui patches"
 msgstr "一些網頁介面的修補程式"
 
 #: ktorrent/main.cpp:156
 #, kde-format
 msgid "Ozzi"
 msgstr "Ozzi"
 
 #: ktorrent/main.cpp:156
 #, kde-format
 msgid "Fixes for several warnings"
 msgstr "修正了一些警告"
 
 #: ktorrent/main.cpp:157
 #, kde-format
 msgid "Markus Brueffer"
 msgstr "Markus Brueffer"
 
 #: ktorrent/main.cpp:157
 #, kde-format
 msgid "Patch to fix free diskspace calculation on FreeBSD"
 msgstr "FreeBSD 上計算磁碟剩餘空間的修補程式"
 
 #: ktorrent/main.cpp:158
 #, kde-format
 msgid "Lukas Appelhans"
 msgstr "Lukas Appelhans"
 
 #: ktorrent/main.cpp:158
 #, kde-format
 msgid "Patch to fix a crash in ChunkDownloadView"
 msgstr "修正 ChunkDownloadView 中會當掉的問題"
 
 #: ktorrent/main.cpp:159
 #, kde-format
 msgid "Rickard Närström"
 msgstr "Rickard Närström"
 
 #: ktorrent/main.cpp:159
 #, kde-format
 msgid "A couple of bugfixes"
 msgstr "一些錯誤修正"
 
 #: ktorrent/main.cpp:160
 #, kde-format
 msgid "caruccio"
 msgstr "caruccio"
 
 #: ktorrent/main.cpp:160
 #, kde-format
 msgid "Patch to load torrents silently from the command line"
 msgstr "從命令列載入 torrent 的修補程式"
 
 #: ktorrent/main.cpp:161
 #, kde-format
 msgid "Lee Olson"
 msgstr "Lee Olson"
 
 #: ktorrent/main.cpp:161
 #, kde-format
 msgid "New set of icons"
 msgstr "新的圖示集"
 
 #: ktorrent/main.cpp:162
 #, kde-format
 msgid "Aaron J. Seigo"
 msgstr "Aaron J. Seigo"
 
 #: ktorrent/main.cpp:162
 #, kde-format
 msgid "Drag and drop support for Plasma applet"
 msgstr "Plasma 小程式中支援拖放"
 
 #: ktorrent/main.cpp:163
 #, kde-format
 msgid "Ian Higginson"
 msgstr "Ian Higginson"
 
 #: ktorrent/main.cpp:163
 #, kde-format
 msgid "Patch to cleanup the plugin list"
 msgstr "修補並整理外掛程式清單"
 
 #: ktorrent/main.cpp:164
 #, kde-format
 msgid "Amichai Rothman"
 msgstr "Amichai Rothman"
 
 #: ktorrent/main.cpp:164
 #, kde-format
 msgid "Patch to make the Plasma applet a popup applet"
 msgstr "讓 plasma 小程式成為彈出式小程式"
 
 #: ktorrent/main.cpp:165
 #, kde-format
 msgid "Leo Trubach"
 msgstr "Leo Trubach"
 
 #: ktorrent/main.cpp:165
 #, kde-format
 msgid "Patch to add support for IP ranges in IP filter dialog"
 msgstr "提供修補，讓 IP 過濾器可以支援指定 IP 範圍"
 
 #: ktorrent/main.cpp:166
 #, kde-format
 msgid "Andrei Barbu"
 msgstr "Andrei Barbu"
 
 #: ktorrent/main.cpp:166
 #, kde-format
 msgid "Feature which adds the date a torrent was added"
 msgstr "某個 torrent 被新增的日期"
 
 #: ktorrent/main.cpp:167
 #, kde-format
 msgid "Jonas Lundqvist"
 msgstr "Jonas Lundqvist"
 
 #: ktorrent/main.cpp:167
 #, kde-format
 msgid "Feature to disable authentication in the webinterface"
 msgstr "關閉網頁介面中的認證功能"
 
 #: ktorrent/main.cpp:168
 #, kde-format
 msgid "Jaroslaw Swierczynski"
 msgstr "Jaroslaw Swierczynski"
 
 #: ktorrent/main.cpp:168
 #, kde-format
 msgid "Exclusion patterns in the syndication plugin"
 msgstr "在 syndication 外掛程式中的排除樣式"
 
 #: ktorrent/main.cpp:169
 #, kde-format
 msgid "Alexey Shildyakov "
 msgstr "Alexey Shildyakov "
 
 #: ktorrent/main.cpp:169
 #, kde-format
 msgid "Patch to rename single file torrents to the file inside"
 msgstr "將內部只有單一檔案的 torrents 更名為內部檔案的檔名的修補"
 
 #: ktorrent/main.cpp:170
 #, kde-format
 msgid "Maarten De Meyer"
 msgstr "Maarten De Meyer"
 
 #: ktorrent/main.cpp:170
 #, kde-format
 msgid "Fix for bug 305379"
 msgstr "修正 bug 305379"
 
 #: ktorrent/main.cpp:171
 #, kde-format
 msgid "Rex Dieter"
 msgstr "Rex Dieter"
 
 #: ktorrent/main.cpp:171
 #, kde-format
 msgid "Add support for x-scheme-handler/magnet mimetype"
 msgstr "加入對 x-scheme-handler/magnet mime 類型的支援"
 
 #: ktorrent/main.cpp:172
 #, kde-format
 msgid "Leszek Lesner"
 msgstr "Leszek Lesner"
 
 #: ktorrent/main.cpp:172
 #, kde-format
 msgid "Fix for bug 339584"
 msgstr "修正 bug 339584"
 
 #: ktorrent/main.cpp:173
 #, kde-format
 msgid "Andrius Štikonas"
 msgstr "Andrius Štikonas"
 
 #: ktorrent/main.cpp:173 ktorrent/main.cpp:174
 #, kde-format
 msgid "KF5 porting"
 msgstr "KF5 移植"
 
 #: ktorrent/main.cpp:174
 #, kde-format
 msgid "Nick Shaforostoff"
 msgstr "Nick Shaforostoff"
 
 #: ktorrent/main.cpp:178
 #, kde-format
 msgid "Enable logging to standard output"
 msgstr "啟用將紀錄傳送至標準輸出"
 
 #: ktorrent/main.cpp:179
 #, kde-format
 msgid "Silently open torrent given on URL"
 msgstr "無聲地從指定網址開啟 torrent"
 
 #: ktorrent/main.cpp:180
 #, kde-format
 msgid "Document to open"
 msgstr "要開啟的檔案"
 
 #. i18n: ectx: property (toolTip), widget (QGroupBox, kcfg_diskPrealloc)
 #: ktorrent/pref/advancedpref.ui:17
 #, kde-format
 msgid ""
 "Whether or not diskspace should be reserved before starting to download a "
 "torrent."
 msgstr "開始下載 torrent 前是否要預留硬碟空間。"
 
 #. i18n: ectx: property (title), widget (QGroupBox, kcfg_diskPrealloc)
 #: ktorrent/pref/advancedpref.ui:20
 #, kde-format
 msgid "Reserve disk space before starting a torrent"
 msgstr "開始 torrent 前保留磁碟空間"
 
 #. i18n: ectx: property (toolTip), widget (QCheckBox, kcfg_fullDiskPrealloc)
 #: ktorrent/pref/advancedpref.ui:32
 #, kde-format
 msgid ""
 "Instead of doing a quick reservation, do a full reservation. This is slower "
 "than the quick way, but avoids fragmentation on the disk."
 msgstr ""
 "進行完全保留而不是快速保留。儘管效率較低，但可避免因沒有足夠的連續空間來放資"
 "料而破碎。"
 
 #. i18n: ectx: property (text), widget (QCheckBox, kcfg_fullDiskPrealloc)
 #: ktorrent/pref/advancedpref.ui:35
 #, kde-format
 msgid "Fully reserve disk space (avoids fragmentation)"
 msgstr "完全保留空間"
 
 #. i18n: ectx: property (title), widget (QGroupBox, groupBox_3)
 #: ktorrent/pref/advancedpref.ui:45
 #, kde-format
 msgid "Performance"
 msgstr "效能"
 
 #. i18n: ectx: property (text), widget (QLabel, label_5)
 #: ktorrent/pref/advancedpref.ui:53
 #, kde-format
 msgid "GUI update interval:"
 msgstr "GUI 更新間隔:"
 
 #. i18n: ectx: property (toolTip), widget (QSpinBox, kcfg_guiUpdateInterval)
 #: ktorrent/pref/advancedpref.ui:67
 #, kde-format
 msgid ""
 "<p>The interval in milliseconds between GUI updates.</p>\n"
 "<p><span style=\" font-weight:600;\">Note: </span>Increasing this will "
 "decrease CPU usage.</p>"
 msgstr ""
 "<p>使用者介面更新的間隔時間，單位為毫秒。</p>\n"
 "<p><span style=\"font-weight:600;\">注意：</span>此數值增加可以降低 CPU 使用"
 "率。</p>"
 
 #. i18n: ectx: property (suffix), widget (QSpinBox, kcfg_guiUpdateInterval)
 #. i18n: ectx: property (suffix), widget (QSpinBox, kcfg_cpuUsage)
 #: ktorrent/pref/advancedpref.ui:70 ktorrent/pref/advancedpref.ui:98
 #, kde-format
 msgid " ms"
 msgstr " 毫秒"
 
 #. i18n: ectx: property (text), widget (QLabel, label_6)
 #: ktorrent/pref/advancedpref.ui:86
 #, kde-format
 msgid "Network sleep interval:"
 msgstr "網路睡眠間隔："
 
 #. i18n: ectx: property (toolTip), widget (QSpinBox, kcfg_cpuUsage)
 #: ktorrent/pref/advancedpref.ui:95
 #, kde-format
 msgid ""
 "<p>Amount of time the network threads will sleep when they are speed "
 "limited. This has absolutely no effect when there are no speed limits.</p>\n"
 "<p><span style=\" font-weight:600;\">Note:</span> The lower this is the more "
 "CPU is used. Setting it high can lead to lower speeds in high bandwidth "
 "situations. </p>\n"
 "<p>For example on an 100 Mbit LAN, if you set a limit of 3000 KiB/s, you "
 "might not actually reach this speed when this value is too high. Without a "
 "limit you can easily get above 3000 KiB/s on a LAN.</p>"
 msgstr ""
 "<p>在有速度限制時，網路執行緒的睡眠時間。如果不限速度，則此項目沒有作用。</"
 "p>\n"
 "<p><span style=\" font-weight:600;\">注意：</span>此值越低，CPU 使用率就越"
 "高。不過將此值設較高，有可能在網路頻寬夠高的環境下反而會降低速度。</p>\n"
 "<p>例如在 100 Mbit 的 LAN 裡，若將限制設在 3000 KB/s，則此值設得太高，可能速"
 "度根本就上不了 3000 KB/s。若不限制速度，則在 LAN 的環境下可以輕易超過 3000 "
 "KB/s。</p>"
 
 #. i18n: ectx: property (title), widget (QGroupBox, groupBox_2)
 #: ktorrent/pref/advancedpref.ui:132
 #, kde-format
 msgid "Magnets Queue"
 msgstr "Magnet 佇列"
 
 #. i18n: ectx: property (text), widget (QLabel, label)
 #: ktorrent/pref/advancedpref.ui:140
 #, kde-format
 msgid "Number of downloading slots:"
 msgstr "下載槽的數量："
 
 #. i18n: ectx: property (toolTip), widget (QSpinBox, kcfg_numMagnetDownloadingSlots)
 #: ktorrent/pref/advancedpref.ui:147
 #, kde-format
 msgid "Maximum number of concurrent downloading magnets at the same time."
 msgstr "最大同時下載的 magnet 數量。"
 
 #. i18n: ectx: property (toolTip), widget (QCheckBox, kcfg_requeueMagnets)
 #: ktorrent/pref/advancedpref.ui:163
 #, kde-format
 msgid ""
 "Whether or not the magnets that are not downloaded after a maximum period of "
 "time must be pushed back at the end of the queue."
 msgstr "若是某個 magnet 在一段時間內未下載，是否要將它放到佇列的最後面。"
 
 #. i18n: ectx: property (text), widget (QCheckBox, kcfg_requeueMagnets)
 #: ktorrent/pref/advancedpref.ui:166
 #, kde-format
 msgid "Requeue magnets after:"
 msgstr "重新安排 magnet 時間："
 
 #. i18n: ectx: property (toolTip), widget (QSpinBox, kcfg_requeueMagnetsTime)
 #: ktorrent/pref/advancedpref.ui:173
 #, kde-format
 msgid ""
 "Maximum time that a magnet can occupy a downloading slot before it will be "
 "pushed back in the queue."
 msgstr "每個 magnet 可以佔住下載槽多久後會被放入佇列的最後。"
 
 #. i18n: ectx: property (suffix), widget (QSpinBox, kcfg_requeueMagnetsTime)
 #: ktorrent/pref/advancedpref.ui:176 ktorrent/pref/qmpref.cpp:30
 #, kde-format
 msgid " min"
 msgstr " 分鐘"
 
 #. i18n: ectx: property (title), widget (QGroupBox, groupBox)
 #. i18n: ectx: property (title), widget (QGroupBox, groupBox_3)
 #: ktorrent/pref/advancedpref.ui:210 ktorrent/pref/generalpref.ui:113
 #, kde-format
 msgid "Miscellaneous"
 msgstr "雜項"
 
 #. i18n: ectx: property (text), widget (QLabel, label_2)
 #: ktorrent/pref/advancedpref.ui:220
 #, kde-format
 msgid "Preview size for audio files:"
 msgstr "音效檔預覽大小："
 
 #. i18n: ectx: property (toolTip), widget (QSpinBox, kcfg_previewSizeAudio)
 #: ktorrent/pref/advancedpref.ui:227
 #, kde-format
 msgid ""
 "<p>The amount of data at the beginning and end of an audio file, which will "
 "be prioritized for previewing.</p>"
 msgstr "<p>音效檔開頭與結尾的資料量，用來計算預覽優先權。</p>"
 
 #. i18n: ectx: property (suffix), widget (QSpinBox, kcfg_previewSizeAudio)
 #. i18n: ectx: property (suffix), widget (QSpinBox, kcfg_previewSizeVideo)
 #: ktorrent/pref/advancedpref.ui:230 ktorrent/pref/advancedpref.ui:253
 #, kde-format
 msgid " KiB"
 msgstr " KB"
 
 #. i18n: ectx: property (text), widget (QLabel, label_3)
 #: ktorrent/pref/advancedpref.ui:243
 #, kde-format
 msgid "Preview size for video files:"
 msgstr "影像檔預覽大小："
 
 #. i18n: ectx: property (toolTip), widget (QSpinBox, kcfg_previewSizeVideo)
 #: ktorrent/pref/advancedpref.ui:250
 #, kde-format
 msgid ""
 "<p>The amount of data at the beginning and end of a video file, which will "
 "be prioritized for previewing.</p>"
 msgstr "<p>影像檔開頭與結尾的資料量，用來計算預覽優先權。</p>"
 
 #. i18n: ectx: property (toolTip), widget (QCheckBox, kcfg_useQHttpAnnounce)
 #: ktorrent/pref/advancedpref.ui:285
 #, kde-format
 msgid ""
 "Disables the use of KDE's KIO library for tracker announces.\n"
 "\n"
 "This is experimental and should only be used if you are getting a lot of "
 "connection to host broken errors."
 msgstr ""
 "在追蹤器宣告時不要使用 KDE 的 KIO 函式庫。\n"
 "\n"
 "這個功能是實驗性質，最好只在您看到一大堆的主機連線錯誤時再試著使用此選項。"
 
 #. i18n: ectx: property (text), widget (QCheckBox, kcfg_useQHttpAnnounce)
 #: ktorrent/pref/advancedpref.ui:288
 #, kde-format
 msgid "Do not use KIO for tracker announces"
 msgstr "追蹤器宣告不要使用 KIO"
 
 #. i18n: ectx: property (toolTip), widget (QCheckBox, kcfg_lookUpHostnameOfPeers)
 #: ktorrent/pref/advancedpref.ui:300
 #, kde-format
 msgid ""
 "Resolve the hostname of each peer. This will result in the hostname of a "
 "peer being displayed instead of the IP address. \n"
 "\n"
 "It can be disabled if you do not like the additional network traffic it "
 "generates"
 msgstr ""
 "解析每個端點的主機名稱。這會在顯示端點時顯示主機名稱而非 IP 位址。\n"
 "\n"
 "這樣會增加網路流量，所以您可以選擇關閉它。"
 
 #. i18n: ectx: property (text), widget (QCheckBox, kcfg_lookUpHostnameOfPeers)
 #: ktorrent/pref/advancedpref.ui:303
 #, kde-format
 msgid "Resolve hostnames of peers"
 msgstr "解析端點主機名稱"
 
 #: ktorrent/pref/btpref.cpp:28
 #, kde-format
 msgid "BitTorrent"
 msgstr "BitTorrent"
 
 #. i18n: ectx: property (title), widget (QGroupBox, dhtGroupBox)
 #: ktorrent/pref/btpref.ui:17
 #, kde-format
 msgid "Features"
 msgstr "功能"
 
 #. i18n: ectx: property (toolTip), widget (QCheckBox, kcfg_dhtSupport)
 #: ktorrent/pref/btpref.ui:23
 #, kde-format
 msgid ""
 "DHT is a trackerless protocol to find peers sharing the same torrents as you "
 "do."
 msgstr "DHT 是一個用於尋找端點，分享同樣的 torrent 的協定。"
 
 #. i18n: ectx: property (text), widget (QCheckBox, kcfg_dhtSupport)
 #: ktorrent/pref/btpref.ui:26
 #, kde-format
 msgid "Use DHT to get additional peers"
 msgstr "利用 DHT 取得額外的端點"
 
 #. i18n: ectx: property (text), widget (QLabel, label_4)
 #: ktorrent/pref/btpref.ui:35
 #, kde-format
 msgid "UDP port for DHT communications:"
 msgstr "DHT 所用的UDP 連接埠 "
 
 #. i18n: ectx: property (toolTip), widget (QSpinBox, kcfg_dhtPort)
 #: ktorrent/pref/btpref.ui:43
 #, kde-format
 msgid ""
 "<p>UDP port to use for the DHT protocol.</p>\n"
 "<p><span style=\" font-weight:600;\">Attention:</span> If you are behind a "
 "router, this port needs to be forwarded to accept incoming DHT requests. The "
 "UPnP plugin can do this for you.</p>"
 msgstr ""
 "<p>DHT 協定使用的 UDP 連接埠。</p>\n"
 "<p><span style=\" font-weight:600;\">注意：</span>若您在某個路由器之後，則必"
 "須設定連接埠轉接。UPnP 外掛程式能協助您做這件事。</p>"
 
 #. i18n: ectx: property (toolTip), widget (QCheckBox, kcfg_pexEnabled)
 #: ktorrent/pref/btpref.ui:61
 #, kde-format
 msgid "Whether or not to use µTorrent compatible peer exchange."
 msgstr "是否要使用與 µTorrent 相容的端點交換。"
 
 #. i18n: ectx: property (text), widget (QCheckBox, kcfg_pexEnabled)
 #: ktorrent/pref/btpref.ui:64
 #, kde-format
 msgid "Use peer exchange"
 msgstr "使用端點交換"
 
 #. i18n: ectx: property (toolTip), widget (QCheckBox, kcfg_webseedsEnabled)
 #: ktorrent/pref/btpref.ui:71
 #, kde-format
 msgid ""
 "Enable or disable the use of webseeds when they are present in a torrent."
 msgstr "當 torrent 中有的時候，選擇開啟或關閉使用 webseeds。"
 
 #. i18n: ectx: property (text), widget (QCheckBox, kcfg_webseedsEnabled)
 #: ktorrent/pref/btpref.ui:74
 #, kde-format
 msgid "Use webseeds"
 msgstr "使用 Webseeds"
 
 #. i18n: ectx: property (toolTip), widget (QCheckBox, kcfg_checkWhenFinished)
 #: ktorrent/pref/btpref.ui:81
 #, kde-format
 msgid ""
 "When a torrent has finished downloading, do a full data check on the torrent."
 msgstr "當 torrent 完成下載時，執行完整的資料檢查。"
 
 #. i18n: ectx: property (text), widget (QCheckBox, kcfg_checkWhenFinished)
 #: ktorrent/pref/btpref.ui:84
 #, kde-format
 msgid "Check data when download is finished"
 msgstr "當完成下載時檢查資料"
 
 #. i18n: ectx: property (title), widget (QGroupBox, groupBox_4)
 #: ktorrent/pref/btpref.ui:94
 #, kde-format
 msgid "Encryption"
 msgstr "加密"
 
 #. i18n: ectx: property (toolTip), widget (QCheckBox, kcfg_useEncryption)
 #: ktorrent/pref/btpref.ui:101
 #, kde-format
 msgid ""
 "<p>Protocol encryption is useful when your ISP is slowing down bittorrent "
 "connections. </p>\n"
 "<p>The encryption will prevent your bittorrent traffic to be flagged as "
 "bittorrent traffic, and so the ISP will not slow it down.</p>"
 msgstr ""
 "<p>協定加密在您的網路服務提供者將 bittorrent 連線的速率降低的時候有用。</p>\n"
 "<p>它可以避免您的 bittorrent 傳輸被標記成 bittorrent，這樣速率就不會被人家刻"
 "意降低。</p>"
 
 #. i18n: ectx: label, entry (useEncryption), group (downloads)
 #. i18n: ectx: property (text), widget (QCheckBox, kcfg_useEncryption)
 #: ktorrent/pref/btpref.ui:104 libktcore/ktorrent.kcfg:152
 #, kde-format
 msgid "Use protocol encryption"
 msgstr "使用協定加密"
 
 #. i18n: ectx: property (toolTip), widget (QCheckBox, kcfg_allowUnencryptedConnections)
 #: ktorrent/pref/btpref.ui:111
 #, kde-format
 msgid ""
 "Not all clients support encryption, and some people have encryption "
 "disabled. If you want to connect to those peers, you need to have this "
 "option enabled."
 msgstr ""
 "不是所有的P2P 軟件都支援加密 - 有些人甚至把這個功能關掉。如果你要與那些人連"
 "接, 你必需關掉這選項"
 
 #. i18n: ectx: label, entry (allowUnencryptedConnections), group (downloads)
 #. i18n: ectx: property (text), widget (QCheckBox, kcfg_allowUnencryptedConnections)
 #: ktorrent/pref/btpref.ui:114 libktcore/ktorrent.kcfg:156
 #, kde-format
 msgid "Allow unencrypted connections"
 msgstr "容許沒加密的連線"
 
 #. i18n: ectx: property (title), widget (QGroupBox, groupBox)
 #: ktorrent/pref/btpref.ui:124
 #, kde-format
 msgid "Tracker"
 msgstr "追蹤器"
 
 #. i18n: ectx: property (toolTip), widget (QCheckBox, kcfg_useCustomIP)
 #: ktorrent/pref/btpref.ui:130
 #, kde-format
 msgid ""
 "Instead of allowing the tracker to determine your IP address, tell the "
 "tracker which IP address to use. Use this when you are behind a proxy."
-msgstr ""
-"直接指定 IP，而不讓追蹤器決定您的 IP 位址。當您使用代理伺服器時請使用此選項。"
+msgstr "直接指定 IP，而不讓追蹤器決定您的 IP 位址。當您使用代理伺服器時請使用此選項。"
 
 #. i18n: ectx: property (text), widget (QCheckBox, kcfg_useCustomIP)
 #: ktorrent/pref/btpref.ui:133
 #, kde-format
 msgid "Send the tracker a custom IP address or hostname"
 msgstr "自訂要傳送給追蹤器的 IP 位址或主機名稱"
 
 #. i18n: ectx: property (text), widget (QLabel, label)
 #: ktorrent/pref/btpref.ui:142
 #, kde-format
 msgid "Custom IP address or hostname:"
 msgstr "自訂位址或主機名稱："
 
 #. i18n: ectx: property (toolTip), widget (QLineEdit, kcfg_customIP)
 #: ktorrent/pref/btpref.ui:149
 #, kde-format
 msgid ""
 "Custom IP address or hostname to send to the tracker. Hostnames will be "
 "resolved at runtime and the resolved IP address will be sent to the tracker."
 msgstr ""
 "自訂要傳送給追蹤器的 IP 位址或主機名稱。主機名稱會在執行時做解譯，並將解譯後"
 "的 IP 位址送給追蹤器。"
 
 #: ktorrent/pref/generalpref.cpp:28
 #, kde-format
 msgid "Application"
 msgstr "應用程式"
 
 #. i18n: ectx: property (title), widget (QGroupBox, groupBox)
 #: ktorrent/pref/generalpref.ui:17
 #, kde-format
 msgid "Folders"
 msgstr "資料夾"
 
 #. i18n: ectx: property (text), widget (QLabel, label)
 #: ktorrent/pref/generalpref.ui:23
 #, kde-format
 msgid "Folder to store torrent information:"
 msgstr "儲存 torrent 資訊的資料夾："
 
 #. i18n: ectx: property (toolTip), widget (KUrlRequester, kcfg_tempDir)
 #: ktorrent/pref/generalpref.ui:30
 #, kde-format
 msgid ""
 "Directory to store information about all torrents currently opened in "
 "KTorrent."
 msgstr "儲存目前在 KTorrent 中開啟的所有 torrent 的資訊的目錄。"
 
 #. i18n: ectx: property (toolTip), widget (QCheckBox, kcfg_useSaveDir)
 #. i18n: ectx: property (toolTip), widget (KUrlRequester, kcfg_saveDir)
 #: ktorrent/pref/generalpref.ui:37 ktorrent/pref/generalpref.ui:47
 #, kde-format
 msgid "Directory to use as a default save location for all data."
 msgstr "做為所有資料儲存預設位置的資料夾。"
 
 #. i18n: ectx: property (toolTip), widget (QCheckBox, kcfg_useCompletedDir)
 #. i18n: ectx: property (toolTip), widget (KUrlRequester, kcfg_completedDir)
 #: ktorrent/pref/generalpref.ui:54 ktorrent/pref/generalpref.ui:64
 #, kde-format
 msgid "Directory to move data to when a torrent has finished downloading."
 msgstr "當 torrent 完成下載後要將資料移動到哪個目錄。"
 
 #. i18n: ectx: property (text), widget (QCheckBox, kcfg_useCompletedDir)
 #: ktorrent/pref/generalpref.ui:57
 #, kde-format
 msgid "Move completed downloads to:"
 msgstr "把已完成的下載移到："
 
 #. i18n: ectx: property (toolTip), widget (QCheckBox, kcfg_useTorrentCopyDir)
 #. i18n: ectx: property (toolTip), widget (KUrlRequester, kcfg_torrentCopyDir)
 #: ktorrent/pref/generalpref.ui:71 ktorrent/pref/generalpref.ui:81
 #, kde-format
 msgid "Directory to copy all torrent files in, which are opened by KTorrent."
 msgstr "將 KTorrent 開啟的 torrent 檔複製到哪個目錄。"
 
 #. i18n: ectx: property (text), widget (QCheckBox, kcfg_useTorrentCopyDir)
 #: ktorrent/pref/generalpref.ui:74
 #, kde-format
 msgid "Copy torrent files to:"
 msgstr "複製 torrent 檔到："
 
 #. i18n: ectx: property (title), widget (QGroupBox, kcfg_showSystemTrayIcon)
 #: ktorrent/pref/generalpref.ui:91
 #, kde-format
 msgid "System Tray Icon"
 msgstr "系統匣圖示"
 
 #. i18n: ectx: property (toolTip), widget (QCheckBox, kcfg_showPopups)
 #: ktorrent/pref/generalpref.ui:100
 #, kde-format
 msgid "Whether or not to show system tray popup messages."
 msgstr "是否要顯示系統匣的彈出式訊息。"
 
 #. i18n: ectx: property (text), widget (QCheckBox, kcfg_showPopups)
 #: ktorrent/pref/generalpref.ui:103
 #, kde-format
 msgid "Show system tray popup messages"
 msgstr "顯示系統匣的彈出訊息"
 
 #. i18n: ectx: property (toolTip), widget (QCheckBox, kcfg_openMultipleTorrentsSilently)
 #: ktorrent/pref/generalpref.ui:119
 #, kde-format
 msgid ""
 "When you select multiple torrents to be opened at the same time, open them "
 "silently."
 msgstr "您同時開啟多個 torrent 的話，無聲地開啟。"
 
 #. i18n: ectx: property (text), widget (QCheckBox, kcfg_openMultipleTorrentsSilently)
 #: ktorrent/pref/generalpref.ui:122
 #, kde-format
 msgid "Open multiple torrents silently"
 msgstr "無聲地開啟多個 torrent 檔"
 
 #. i18n: ectx: property (toolTip), widget (QCheckBox, kcfg_openAllTorrentsSilently)
 #: ktorrent/pref/generalpref.ui:129
 #, kde-format
 msgid "Open all torrents silently."
 msgstr "無聲地開啟所有 torrent 檔。"
 
 #. i18n: ectx: property (text), widget (QCheckBox, kcfg_openAllTorrentsSilently)
 #: ktorrent/pref/generalpref.ui:132
 #, kde-format
 msgid "Open all torrents silently"
 msgstr "無聲地開啟所有 torrent 檔"
 
 #. i18n: ectx: property (toolTip), widget (QCheckBox, kcfg_suppressSleep)
 #: ktorrent/pref/generalpref.ui:139
 #, kde-format
 msgid ""
 "Prevent computer from going into a sleep state when torrents are running."
 msgstr "Torrent 執行時避免電腦進入睡眠模式"
 
 #. i18n: ectx: property (text), widget (QCheckBox, kcfg_suppressSleep)
 #: ktorrent/pref/generalpref.ui:142
 #, kde-format
 msgid "Suppress sleep when torrents are running"
 msgstr "Torrent 執行時不進入睡眠模式"
 
 #. i18n: ectx: property (toolTip), widget (QCheckBox, kcfg_autoRenameSingleFileTorrents)
 #: ktorrent/pref/generalpref.ui:150
 #, kde-format
 msgid ""
 "<p>Rename a single file torrent with the name of its only file. </p>\n"
 "<p>If for example the file is named <span style=\" font-weight:600;\">linux-"
 "desktop.iso</span>, the torrent will be displayed as <span style=\" font-"
 "weight:600;\">linux-desktop.</span></p>"
 msgstr ""
 "<p>如果 torrent 中只有一個檔案，則將它重新命名成檔案的名稱。</p>\n"
 "<p>例如，若檔案名為 <span style=\" font-weight:600;\">linux-desktop.iso</"
 "span>，則 torrent 的名稱會顯示為 linux-desktop。</p>"
 
 #. i18n: ectx: property (text), widget (QCheckBox, kcfg_autoRenameSingleFileTorrents)
 #: ktorrent/pref/generalpref.ui:153
 #, kde-format
 msgid "Rename single file torrents with the name of its only file"
 msgstr "將內部只有單一檔案的 torrents 更名為內部檔案的檔名"
 
 #. i18n: ectx: property (toolTip), widget (QCheckBox, kcfg_highlightNewTorrents)
 #: ktorrent/pref/generalpref.ui:160
 #, kde-format
 msgid "Whether or not new torrents will be highlighted."
 msgstr "是否要突顯新的 torrents。"
 
 #. i18n: ectx: property (text), widget (QCheckBox, kcfg_highlightNewTorrents)
 #: ktorrent/pref/generalpref.ui:163
 #, kde-format
 msgid "Highlight new torrents"
 msgstr "突顯新的 Torrents"
 
 #. i18n: ectx: property (text), widget (QCheckBox, kcfg_showTotalSpeedInTitle)
 #: ktorrent/pref/generalpref.ui:170
 #, kde-format
 msgid "Show total speed in the window title"
 msgstr "在視窗標題內顯示總速度"
 
 #. i18n: ectx: property (title), widget (QGroupBox, groupBox)
 #: ktorrent/pref/networkpref.cpp:37 ktorrent/pref/recommendedsettingsdlg.ui:199
 #, kde-format
 msgid "Network"
 msgstr "網路"
 
 #: ktorrent/pref/networkpref.cpp:59
 #, kde-format
 msgid "All interfaces"
 msgstr "所有介面"
 
 #. i18n: ectx: property (title), widget (QGroupBox, groupBox)
 #: ktorrent/pref/networkpref.ui:17
 #, kde-format
 msgid "Ports && Limits"
 msgstr "連接埠與限制"
 
 #. i18n: ectx: property (toolTip), widget (QSpinBox, kcfg_port)
 #: ktorrent/pref/networkpref.ui:31
 #, kde-format
 msgid ""
 "<p>Port used for the bittorrent protocol.</p>\n"
 "<p><span style=\" font-weight:600;\">Attention:</span> If you are behind a "
 "router, this port needs to be forwarded to accept incoming connections. The "
 "UPnP plugin can do this for you.</p>"
 msgstr ""
 "<p>bittorrent 協定使用的連接埠。</p>\n"
 "<p><span style=\"font-weight:600;\">注意：</span>若您在某個路由器之後，則必須"
 "設定連接埠轉接。UPnP 外掛程式能協助您做這件事。</p>"
 
 #. i18n: ectx: property (text), widget (QLabel, label_2)
 #: ktorrent/pref/networkpref.ui:47
 #, kde-format
 msgid "UDP tracker port:"
 msgstr "UDP 追蹤器連接埠："
 
 #. i18n: ectx: property (toolTip), widget (QSpinBox, kcfg_udpTrackerPort)
 #: ktorrent/pref/networkpref.ui:55
 #, kde-format
 msgid ""
 "<p>Port used for the UDP tracker protocol.</p>\n"
 "<p><span style=\" font-weight:600;\">Attention:</span> If you are behind a "
 "router, this port needs to be forwarded. The UPnP plugin can do this for you."
 "</p>"
 msgstr ""
 "<p>UDP 追蹤器使用的連接埠。</p>\n"
 "<p><span style=\"font-weight:600;\">注意：</span>若您在某個路由器之後，則必須"
 "設定連接埠轉接。UPnP 外掛程式能協助您做這件事。</p>"
 
 #. i18n: ectx: property (text), widget (QLabel, label_7)
 #. i18n: ectx: property (text), widget (QLabel, label_3)
 #: ktorrent/pref/networkpref.ui:71 ktorrent/pref/recommendedsettingsdlg.ui:233
 #: plugins/bwscheduler/edititemdlg.ui:226
 #, kde-format
 msgid "Maximum connections per torrent:"
 msgstr "每個 torrent 的最大連線數："
 
 #. i18n: ectx: property (toolTip), widget (QSpinBox, kcfg_maxConnections)
 #: ktorrent/pref/networkpref.ui:78
 #, kde-format
 msgid "The maximum number of connections allowed per torrent."
 msgstr "每個 torrent 允許的最大連線數量。"
 
 #. i18n: ectx: property (text), widget (QLabel, label_8)
 #. i18n: ectx: property (text), widget (QLabel, label_4)
 #. i18n: ectx: property (text), widget (QLabel, label_6)
 #: ktorrent/pref/networkpref.ui:91 ktorrent/pref/recommendedsettingsdlg.ui:247
 #: plugins/bwscheduler/edititemdlg.ui:243
 #, kde-format
 msgid "Global connection limit:"
 msgstr "總連線限制："
 
 #. i18n: ectx: property (toolTip), widget (QSpinBox, kcfg_maxTotalConnections)
 #: ktorrent/pref/networkpref.ui:98
 #, kde-format
 msgid "The global connection limit for all torrents combined."
 msgstr "所有 torrent 總合的全域連線限制。"
 
 #. i18n: ectx: property (toolTip), widget (QSpinBox, kcfg_maxDownloadRate)
 #: ktorrent/pref/networkpref.ui:118
 #, kde-format
 msgid "The maximum download speed in KiB/s."
 msgstr "最大下載速度 (KB/s)"
 
 #. i18n: ectx: property (toolTip), widget (QSpinBox, kcfg_maxUploadRate)
 #: ktorrent/pref/networkpref.ui:141
 #, kde-format
 msgid "The maximum upload speed in KiB/s"
 msgstr "最大上傳速度 (KB/s)"
 
 #. i18n: ectx: property (text), widget (QLabel, label_7)
 #: ktorrent/pref/networkpref.ui:168
 #, kde-format
 msgid "DSCP value for IP packets:"
 msgstr "IP 封包的 DSCP 值："
 
 #. i18n: ectx: property (toolTip), widget (QSpinBox, kcfg_dscp)
 #: ktorrent/pref/networkpref.ui:175
 #, kde-format
 msgid ""
 "This value will be filled in the DSCP field of all the IP packets sent for "
 "the bittorrent protocol."
 msgstr "此值將被用於填入所有 bittorrent 協定傳送的 IP 封包中的 DSCP 欄位。"
 
 #. i18n: ectx: property (text), widget (QLabel, label_8)
 #: ktorrent/pref/networkpref.ui:185
 #, kde-format
 msgid "Maximum number of connection setups:"
 msgstr "連線設定最大數量："
 
 #. i18n: ectx: property (toolTip), widget (QSpinBox, kcfg_maxConnectingSockets)
 #: ktorrent/pref/networkpref.ui:193
 #, kde-format
 msgid ""
 "<p>The maximum number of outgoing connections ktorrent will try to setup "
 "simultaneously.</p>\n"
 "<p>If you are having trouble with ktorrent blocking other internet traffic, "
 "try setting this number a bit lower.</p>"
 msgstr ""
 "<p>Ktorrent 同時間嘗試建立的最大對外連線數。</p>\n"
 "<p>若您的 Ktorrent 會造成其他的網路連線阻塞，則試著降低此值。</p>"
 
 #. i18n: ectx: property (text), widget (QLabel, label_9)
 #: ktorrent/pref/networkpref.ui:209
 #, kde-format
 msgid "Network interface:"
 msgstr "網路介面："
 
 #. i18n: ectx: property (toolTip), widget (QComboBox, combo_networkInterface)
 #: ktorrent/pref/networkpref.ui:223
 #, kde-format
 msgid ""
 "<p>Which network interface to listen on for incoming connections.</p>\n"
 "<p><span style=\"font-weight:600;\">Note: </span>Requires a restart to take "
 "effect.</p>"
 msgstr ""
 "<p>要在哪個連接埠監聽進來的連線。</p>\n"
 "<p><span style=\" font-weight:600;\">注意：</span>需要重新啟動程式才能生效。"
 "</p>"
 
 #. i18n: ectx: property (toolTip), widget (QCheckBox, kcfg_utpEnabled)
 #: ktorrent/pref/networkpref.ui:232
 #, kde-format
 msgid ""
 "The µTorrent transport protocol runs over UDP and is optimized to not "
 "interfere with other traffic, while still using up all unused bandwidth."
 msgstr ""
 "µTorrent 傳輸協定使用 UDP，並且經過最佳化，盡可能使用可用的頻寬，同時避免影響"
 "交通。"
 
 #. i18n: ectx: property (text), widget (QCheckBox, kcfg_utpEnabled)
 #: ktorrent/pref/networkpref.ui:235
 #, kde-format
 msgid "Use the µTorrent transport protocol (µTP)"
 msgstr "使用 µTorrent 傳輸協定 (µTP)"
 
 #. i18n: ectx: property (toolTip), widget (QCheckBox, kcfg_onlyUseUtp)
 #: ktorrent/pref/networkpref.ui:242
 #, kde-format
 msgid ""
 "Don't use TCP for bittorrent connections, only use the µTP protocol. This "
 "can lead to slower speeds, seeing that not all bittorrent clients support "
 "µTP."
 msgstr ""
 "對 bittorrent 連線不使用 TCP，只使用 µTP 協定。這樣會造成速度較慢，同時並非所"
 "有的 bittorrent 客戶端程式都支援 µTP。"
 
 #. i18n: ectx: property (text), widget (QCheckBox, kcfg_onlyUseUtp)
 #: ktorrent/pref/networkpref.ui:245
 #, kde-format
 msgid "Only use µTP"
 msgstr "只使用 µTP"
 
 #. i18n: ectx: property (text), widget (QLabel, label_10)
 #: ktorrent/pref/networkpref.ui:254
 #, kde-format
 msgid "Primary transport protocol:"
 msgstr "主要傳輸協定："
 
 #. i18n: ectx: property (toolTip), widget (QComboBox, kcfg_primaryTransportProtocol)
 #: ktorrent/pref/networkpref.ui:261
 #, kde-format
 msgid ""
 "The primary transport protocol to use, when attempting to setup a connection "
 "with a peer, this protocol is chosen first."
 msgstr "要使用的主要傳輸協定。當試圖與端點設定連線時，會優先選擇此協定。"
 
 #. i18n: ectx: property (text), item, widget (QComboBox, m_protocol)
 #. i18n: ectx: property (text), item, widget (QComboBox, kcfg_primaryTransportProtocol)
 #: ktorrent/pref/networkpref.ui:265 ktupnptest/upnptestwidget.ui:102
 #, kde-format
 msgid "TCP"
 msgstr "TCP"
 
 #. i18n: ectx: property (text), item, widget (QComboBox, kcfg_primaryTransportProtocol)
 #: ktorrent/pref/networkpref.ui:270
 #, kde-format
 msgid "µTP"
 msgstr "µTP"
 
 #. i18n: ectx: property (toolTip), widget (QPushButton, m_recommended_settings)
 #: ktorrent/pref/networkpref.ui:311
 #, kde-format
 msgid ""
 "Let KTorrent calculate the recommended settings based upon the bandwidth you "
 "have available."
 msgstr "讓 KTorrent 計算您現有的頻寬，並建議最佳設定。"
 
 #. i18n: ectx: property (text), widget (QPushButton, m_recommended_settings)
 #: ktorrent/pref/networkpref.ui:314
 #, kde-format
 msgid "Recommended Settings..."
 msgstr "建議設定..."
 
 #: ktorrent/pref/proxypref.cpp:28
 #, kde-format
 msgid "Proxy"
 msgstr "代理伺服器"
 
 #. i18n: ectx: property (title), widget (QGroupBox, groupBox_3)
 #: ktorrent/pref/proxypref.ui:17
 #, kde-format
 msgid "HTTP"
 msgstr "HTTP"
 
 #. i18n: ectx: property (toolTip), widget (QCheckBox, kcfg_useKDEProxySettings)
 #: ktorrent/pref/proxypref.ui:23
 #, kde-format
 msgid "Use the HTTP proxy settings configured in the settings of KDE."
 msgstr "使用 KDE 系統設定中的 HTTP 代理伺服器設定。"
 
 #. i18n: ectx: property (text), widget (QCheckBox, kcfg_useKDEProxySettings)
 #: ktorrent/pref/proxypref.ui:26
 #, kde-format
 msgid "Use KDE proxy settings"
 msgstr "使用 KDE 的代理伺服器設定"
 
 #. i18n: ectx: property (text), widget (QLabel, label_10)
 #: ktorrent/pref/proxypref.ui:35
 #, kde-format
 msgid "Proxy:"
 msgstr "代理伺服器："
 
 #. i18n: ectx: property (toolTip), widget (QLineEdit, kcfg_httpProxy)
 #: ktorrent/pref/proxypref.ui:42
 #, kde-format
 msgid "IP address or hostname of the HTTP proxy to use. "
 msgstr "使用的 HTTP 代理伺服器的 IP 位址或主機名稱。"
 
 #. i18n: ectx: property (toolTip), widget (QSpinBox, kcfg_httpProxyPort)
 #: ktorrent/pref/proxypref.ui:56
 #, kde-format
 msgid "Port of the HTTP proxy."
 msgstr "HTTP 代理伺服器的連接埠。"
 
 #. i18n: ectx: property (toolTip), widget (QCheckBox, kcfg_useProxyForWebSeeds)
 #: ktorrent/pref/proxypref.ui:74
 #, kde-format
 msgid "Whether or not to use the HTTP proxy for webseed connections."
 msgstr "網頁種子連線是否使用 HTTP 代理伺服器"
 
 #. i18n: ectx: property (text), widget (QCheckBox, kcfg_useProxyForWebSeeds)
 #: ktorrent/pref/proxypref.ui:77
 #, kde-format
 msgid "Use proxy for webseed connections"
 msgstr "網頁種子連線使用代理伺服器"
 
 #. i18n: ectx: property (toolTip), widget (QCheckBox, kcfg_useProxyForTracker)
 #: ktorrent/pref/proxypref.ui:84
 #, kde-format
 msgid "Whether or not to use the HTTP proxy for tracker connections."
 msgstr "追蹤器連線是否使用 HTTP 代理伺服器。"
 
 #. i18n: ectx: property (text), widget (QCheckBox, kcfg_useProxyForTracker)
 #: ktorrent/pref/proxypref.ui:87
 #, kde-format
 msgid "Use proxy for tracker connections"
 msgstr "追蹤器連線使用代理伺服器"
 
 #. i18n: ectx: property (title), widget (QGroupBox, groupBox)
 #: ktorrent/pref/proxypref.ui:97
 #, kde-format
 msgid "SOCKS"
 msgstr "SOCKS"
 
 #. i18n: ectx: property (toolTip), widget (QCheckBox, kcfg_socksEnabled)
 #: ktorrent/pref/proxypref.ui:104
 #, kde-format
 msgid ""
 "<p>Use a SOCKS proxy server for bittorrent connections.</p>\n"
 "<p><span style=\" font-weight:600;\">Note: </span>This is not used for "
 "tracker connections</p>"
 msgstr ""
 "<p>bittorrent 連線使用 SOCKS 代理伺服器。</p>\n"
 "<p><span style=\" font-weight:600;\">注意：</span>這個設定不是用於追蹤器連"
 "線。</p>"
 
 #. i18n: ectx: property (text), widget (QCheckBox, kcfg_socksEnabled)
 #: ktorrent/pref/proxypref.ui:107
 #, kde-format
 msgid "Use a SOCKS proxy server:"
 msgstr "使用 SOCKS 代理伺服器："
 
 #. i18n: ectx: property (text), widget (QLabel, label_12)
 #: ktorrent/pref/proxypref.ui:116
 #, kde-format
 msgid "Server:"
 msgstr "伺服器："
 
 #. i18n: ectx: property (toolTip), widget (QLineEdit, kcfg_socksProxy)
 #: ktorrent/pref/proxypref.ui:123
 #, kde-format
 msgid "IP address or hostname of the SOCKS server."
 msgstr "使用的 SOCKS 伺服器的 IP 位址或主機名稱。"
 
 #. i18n: ectx: property (toolTip), widget (QSpinBox, kcfg_socksPort)
 #: ktorrent/pref/proxypref.ui:137
 #, kde-format
 msgid "Port used by the SOCKS server."
 msgstr "SOCKS 伺服器使用的連接埠。"
 
 #. i18n: ectx: property (text), widget (QLabel, label_13)
 #: ktorrent/pref/proxypref.ui:144
 #, kde-format
 msgid "Version:"
 msgstr "版本："
 
 #. i18n: ectx: property (toolTip), widget (QCheckBox, kcfg_socksUsePassword)
 #: ktorrent/pref/proxypref.ui:156
 #, kde-format
 msgid ""
 "If the SOCKS server requires authentication via a username and a password, "
 "enable this box."
 msgstr "若 SOCKS 伺服器需要認證，則開啟此選項。"
 
 #. i18n: ectx: property (text), widget (QCheckBox, kcfg_socksUsePassword)
 #: ktorrent/pref/proxypref.ui:159
 #, kde-format
 msgid "Username and password required"
 msgstr "需要使用者名稱與密碼"
 
 #. i18n: ectx: property (text), widget (QLabel, label)
 #. i18n: ectx: property (text), widget (QLabel, textLabel5)
 #: ktorrent/pref/proxypref.ui:170
 #: plugins/scripting/scripts/email_notifications/emailconfig.ui:25
 #: plugins/webinterface/webinterfaceprefwidget.ui:101
 #, kde-format
 msgid "Username:"
 msgstr "使用者名稱："
 
 #. i18n: ectx: property (toolTip), widget (QLineEdit, kcfg_socksUsername)
 #: ktorrent/pref/proxypref.ui:177
 #, kde-format
 msgid "Username for the SOCKS proxy server."
 msgstr "SOCKS 代理伺服器的使用者名稱。"
 
 #. i18n: ectx: property (text), widget (QLabel, label_14)
 #. i18n: ectx: property (text), widget (QLabel, label)
 #. i18n: ectx: property (text), widget (QLabel, label_2)
 #: ktorrent/pref/proxypref.ui:184
 #: plugins/scripting/scripts/email_notifications/emailconfig.ui:35
 #: plugins/webinterface/webinterfaceprefwidget.ui:118
 #, kde-format
 msgid "Password:"
 msgstr "密碼："
 
 #. i18n: ectx: property (toolTip), widget (QLineEdit, kcfg_socksPassword)
 #: ktorrent/pref/proxypref.ui:191
 #, kde-format
 msgid "Password for the SOCKS proxy server."
 msgstr "SOCKS 代理伺服器的密碼。"
 
 #. i18n: ectx: property (title), widget (QGroupBox, m_qm_group_box)
 #. i18n: ectx: property (title), widget (QGroupBox, groupBox_2)
 #: ktorrent/pref/qmpref.cpp:26 ktorrent/pref/qmpref.ui:27
 #: ktorrent/pref/recommendedsettingsdlg.ui:264 ktorrent/torrentactivity.cpp:103
 #, kde-format
 msgid "Queue Manager"
 msgstr "佇列管理員"
 
 #. i18n: ectx: property (toolTip), widget (QCheckBox, kcfg_manuallyControlTorrents)
 #: ktorrent/pref/qmpref.ui:17
 #, kde-format
 msgid ""
 "When enabled, the queue manager will be totally disabled, allowing you to "
 "fully control all torrents manually."
-msgstr ""
-"開啟此選項的話，佇列管理員會完全關閉，您可以手動完全控制所有的 torrent。"
+msgstr "開啟此選項的話，佇列管理員會完全關閉，您可以手動完全控制所有的 torrent。"
 
 #. i18n: ectx: property (text), widget (QCheckBox, kcfg_manuallyControlTorrents)
 #: ktorrent/pref/qmpref.ui:20
 #, kde-format
 msgid "Control torrents manually"
 msgstr "手動控制 torrent"
 
 #. i18n: ectx: property (text), widget (QLabel, label_11)
 #. i18n: ectx: property (text), widget (QLabel, label_14)
 #: ktorrent/pref/qmpref.ui:35 ktorrent/pref/recommendedsettingsdlg.ui:286
 #, kde-format
 msgid "Maximum downloads:"
 msgstr "最大下載數："
 
 #. i18n: ectx: property (toolTip), widget (QSpinBox, kcfg_maxDownloads)
 #: ktorrent/pref/qmpref.ui:42
 #, kde-format
 msgid ""
 "The maximum number of simultaneous downloads the queue manager will run."
 msgstr "佇列管理員會同時下載的最大數量。"
 
 #. i18n: ectx: property (text), widget (QLabel, label_10)
 #. i18n: ectx: property (text), widget (QLabel, label_17)
 #: ktorrent/pref/qmpref.ui:55 ktorrent/pref/recommendedsettingsdlg.ui:300
 #, kde-format
 msgid "Maximum seeds:"
 msgstr "最大播種數："
 
 #. i18n: ectx: property (toolTip), widget (QSpinBox, kcfg_maxSeeds)
 #: ktorrent/pref/qmpref.ui:62
 #, kde-format
 msgid "The maximum number of simultaneous seeds the queue manager will run."
 msgstr "佇列管理員會同時播種的最大數量。"
 
 #. i18n: ectx: property (text), widget (QLabel, label_12)
 #: ktorrent/pref/qmpref.ui:75
 #, kde-format
 msgid "When diskspace is running low:"
 msgstr "當硬碟空間快被用盡時："
 
 #. i18n: ectx: property (toolTip), widget (QComboBox, kcfg_startDownloadsOnLowDiskSpace)
 #: ktorrent/pref/qmpref.ui:82
 #, kde-format
 msgid ""
 "What to do when the diskspace is running low and the queue manager wants to "
 "start a torrent."
 msgstr "當佇列管理員要開始一個 torrent，卻發現硬碟空間快用盡時要做什麼。"
 
 #. i18n: ectx: property (text), item, widget (QComboBox, kcfg_startDownloadsOnLowDiskSpace)
 #: ktorrent/pref/qmpref.ui:86
 #, kde-format
 msgid "Don't start torrents"
 msgstr "不要開始 torrent"
 
 #. i18n: ectx: property (text), item, widget (QComboBox, kcfg_startDownloadsOnLowDiskSpace)
 #: ktorrent/pref/qmpref.ui:91
 #, kde-format
 msgid "Ask if torrents can be started"
 msgstr "詢問是否要開始 torrent"
 
 #. i18n: ectx: property (text), item, widget (QComboBox, kcfg_startDownloadsOnLowDiskSpace)
 #: ktorrent/pref/qmpref.ui:96
 #, kde-format
 msgid "Start torrents"
 msgstr "開始 torrent"
 
 #. i18n: ectx: property (text), widget (QLabel, label_13)
 #: ktorrent/pref/qmpref.ui:104
 #, kde-format
 msgid "Stop torrents when free disk space is lower than:"
 msgstr "當硬碟空間低於多少時停止 torrent："
 
 #. i18n: ectx: property (toolTip), widget (QSpinBox, kcfg_minDiskSpace)
 #: ktorrent/pref/qmpref.ui:111
 #, kde-format
 msgid ""
 "When the free diskspace drops below this value, stop all torrents "
 "downloading."
 msgstr "當硬碟空間低於多少時停止所有的 torrent 下載。"
 
 #. i18n: ectx: property (suffix), widget (QSpinBox, kcfg_minDiskSpace)
 #: ktorrent/pref/qmpref.ui:114
 #, kde-format
 msgid " MiB"
 msgstr " MB"
 
 #. i18n: ectx: property (toolTip), widget (QCheckBox, kcfg_decreasePriorityOfStalledTorrents)
 #: ktorrent/pref/qmpref.ui:131
 #, kde-format
 msgid ""
 "<p>With this enabled, the queue manager will decrease the priority of a "
 "torrent which has been stalled for too long. </p>\n"
 "<p>This will allow the queue manager to run other torrents, when a torrent "
 "is doing nothing.</p>"
 msgstr ""
 "<p>開啟此選項的話，佇列管理員會在某個 torrent 停滯過久時降低它的優先權。</"
 "p>\n"
 "<p>它能讓佇列管理員在 torrent 沒做任何事時去執行其它的 torrents。</p>"
 
 #. i18n: ectx: property (text), widget (QCheckBox, kcfg_decreasePriorityOfStalledTorrents)
 #: ktorrent/pref/qmpref.ui:134
 #, kde-format
 msgid "Decrease priority of torrents which are stalled for more than:"
 msgstr "停滯超過多久的 torrent 降低其優先權："
 
 #. i18n: ectx: property (toolTip), widget (QSpinBox, kcfg_stallTimer)
 #: ktorrent/pref/qmpref.ui:141
 #, kde-format
 msgid ""
 "<p>Time used for the stall timer. When a torrent is stalled longer than "
 "this, its priority will be decreased.</p>"
-msgstr ""
-"<p>停滯計時器的時間。當 torrent 停滯超過這個時間後，優先權會被降低。</p>"
+msgstr "<p>停滯計時器的時間。當 torrent 停滯超過這個時間後，優先權會被降低。</p>"
 
 #. i18n: ectx: property (title), widget (QGroupBox, groupBox_2)
 #: ktorrent/pref/qmpref.ui:159
 #, kde-format
 msgctxt "@title:group Options regarging Seeding"
 msgid "Seeding"
 msgstr "播種中"
 
 #. i18n: ectx: property (toolTip), widget (QCheckBox, kcfg_keepSeeding)
 #: ktorrent/pref/qmpref.ui:165
 #, kde-format
 msgid ""
 "When a download is finished, continue seeding it. If this is disabled, the "
 "torrent will be stopped."
 msgstr "下載完成後，則開始播種。若關閉此選項，則下載完成後就停止動作。"
 
 #. i18n: ectx: property (text), widget (QCheckBox, kcfg_keepSeeding)
 #: ktorrent/pref/qmpref.ui:168
 #, kde-format
 msgid "Keep seeding after download is finished"
 msgstr "下載完成後持續播種"
 
 #. i18n: ectx: property (text), widget (QLabel, label_7)
 #. i18n: ectx: property (text), widget (QLabel, label_6)
 #: ktorrent/pref/qmpref.ui:175 ktorrent/pref/recommendedsettingsdlg.ui:272
 #, kde-format
 msgid "Number of upload slots:"
 msgstr "上傳槽的數量："
 
 #. i18n: ectx: property (toolTip), widget (QSpinBox, kcfg_numUploadSlots)
 #: ktorrent/pref/qmpref.ui:182
 #, kde-format
 msgid ""
 "The number of upload slots, this determines the number of peers you can "
 "upload to simultaneously for one torrent."
 msgstr "上傳槽的數量。這會決定您可以在一個 torrent 中同時上傳幾個端點。"
 
 #. i18n: ectx: property (text), widget (QLabel, label_8)
 #: ktorrent/pref/qmpref.ui:198
 #, kde-format
 msgid "Default maximum share ratio:"
 msgstr "預設最大分享比例："
 
 #. i18n: ectx: property (toolTip), widget (QDoubleSpinBox, kcfg_maxRatio)
 #: ktorrent/pref/qmpref.ui:206
 #, kde-format
 msgid ""
 "<p>The maximum share ratio, if this value is reached seeding will be "
 "stopped. This is only applied to newly opened torrents, existing torrents "
 "will not be affected by changing this.</p>\n"
 "<p><span style=\" font-weight:600;\">Attention: </span>This is not used when "
 "downloading, only when seeding.</p>"
 msgstr ""
 "<p>最大分享比例。達到此比例之後，此 torrent 會停止播種。這只會套用在新開啟的 "
 "torrent，目前已存在的 torrent 將不會被影響。</p>\n"
 "<p><span style=\" font-weight:600;\">注意：</span>這設定不會用在下載，只用於"
 "播種。</p>"
 
 #. i18n: ectx: property (text), widget (QLabel, label_9)
 #: ktorrent/pref/qmpref.ui:222
 #, kde-format
 msgid "Default maximum seed time:"
 msgstr "預設最大播種時間："
 
 #. i18n: ectx: property (toolTip), widget (QDoubleSpinBox, kcfg_maxSeedTime)
 #: ktorrent/pref/qmpref.ui:229
 #, kde-format
 msgid ""
 "The maximum seed time in hours. Once you reach this time, the torrent will "
 "be stopped. This is only applied to newly opened torrents, existing torrents "
 "will not be affected by changing this."
 msgstr ""
 "最大播種時間，以小時為單位。達到此時間之後，此 torrent 會停止播"
-"種。                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       "
+"種。                                                                           "
+"                                                                             "
+"                                                                             "
+"                                                                             "
+"                                                                             "
+"                                                                             "
+"                           "
 "這只會套用在新開啟的 torrent，目前已存在的 torrent 將不會被影響。"
 
 #. i18n: ectx: property (toolTip), widget (QLabel, label_2)
 #. i18n: ectx: property (toolTip), widget (QDoubleSpinBox, kcfg_greenRatio)
 #: ktorrent/pref/qmpref.ui:248 ktorrent/pref/qmpref.ui:258
 #, kde-format
 msgid ""
 "Value at which the share ratio will be displayed with a green color. Lower "
 "ratios will be displayed in red."
 msgstr "分享比例超過多少時顯示為綠色。低於此比例則顯示為紅色。"
 
 #. i18n: ectx: property (text), widget (QLabel, label_2)
 #: ktorrent/pref/qmpref.ui:251
 #, kde-format
 msgid "Minimum good share ratio:"
 msgstr "最低合格分享比例："
 
 #: ktorrent/pref/recommendedsettingsdlg.cpp:40
 #, kde-format
 msgid "Calculate Recommended Settings"
 msgstr "計算建議設定"
 
 #: ktorrent/pref/recommendedsettingsdlg.cpp:247
 #: ktorrent/pref/recommendedsettingsdlg.cpp:252
 #, kde-format
 msgid "(= %1/s)"
 msgstr "（= %1/秒）"
 
 #. i18n: ectx: property (windowTitle), widget (QDialog, RecommendedSettingsDlg)
 #: ktorrent/pref/recommendedsettingsdlg.ui:14
 #, kde-format
 msgid "Recommended Settings"
 msgstr "建議設定"
 
 #. i18n: ectx: property (text), widget (QLabel, label)
 #: ktorrent/pref/recommendedsettingsdlg.ui:24
 #, kde-format
 msgid "Available upload bandwidth:"
 msgstr "可用的上傳頻寬："
 
 #. i18n: ectx: property (specialValueText), widget (QSpinBox, m_upload_bw)
 #. i18n: ectx: property (specialValueText), widget (QSpinBox, m_download_bw)
 #: ktorrent/pref/recommendedsettingsdlg.ui:31
 #: ktorrent/pref/recommendedsettingsdlg.ui:57
 #, kde-format
 msgid " Kbps"
 msgstr " Kbps"
 
 #. i18n: ectx: property (suffix), widget (QSpinBox, m_upload_bw)
 #. i18n: ectx: property (suffix), widget (QSpinBox, m_download_bw)
 #: ktorrent/pref/recommendedsettingsdlg.ui:34
 #: ktorrent/pref/recommendedsettingsdlg.ui:60
 #, kde-format
 msgid " kb/s"
 msgstr " Kb/秒"
 
 #. i18n: ectx: property (text), widget (QLabel, label_2)
 #: ktorrent/pref/recommendedsettingsdlg.ui:50
 #, kde-format
 msgid "Available download bandwidth:"
 msgstr "可用的下載頻寬："
 
 #. i18n: ectx: property (text), widget (QLabel, m_upload_bw_display)
 #: ktorrent/pref/recommendedsettingsdlg.ui:76
 #, kde-format
 msgid "(= 32 KiB/s)"
 msgstr "（= 32 KB/秒）"
 
 #. i18n: ectx: property (text), widget (QLabel, m_download_bw_display)
 #: ktorrent/pref/recommendedsettingsdlg.ui:83
 #, kde-format
 msgid "(= 500 KiB/s)"
 msgstr "（= 500 KB/秒）"
 
 #. i18n: ectx: property (text), widget (QPushButton, m_calculate)
 #: ktorrent/pref/recommendedsettingsdlg.ui:94
 #, kde-format
 msgid "Calculate"
 msgstr "計算"
 
 #. i18n: ectx: property (title), widget (QGroupBox, groupBox_3)
 #: ktorrent/pref/recommendedsettingsdlg.ui:118
 #, kde-format
 msgid "Preferences"
 msgstr "喜好設定"
 
 #. i18n: ectx: property (text), widget (QCheckBox, m_chk_avg_speed_slot)
 #: ktorrent/pref/recommendedsettingsdlg.ui:124
 #, kde-format
 msgid "Average speed per slot:"
 msgstr "每一槽的平均速度："
 
 #. i18n: ectx: property (text), widget (QCheckBox, m_chk_sim_torrents)
 #: ktorrent/pref/recommendedsettingsdlg.ui:147
 #, kde-format
 msgid "Number of torrents you usually download simultaneously:"
 msgstr "您通常同時下載的 torrent 數量："
 
 #. i18n: ectx: property (text), widget (QCheckBox, m_chk_slots)
 #: ktorrent/pref/recommendedsettingsdlg.ui:167
 #, kde-format
 msgid "Slots per torrent:"
 msgstr "每一個 torrent 使用的槽："
 
 #. i18n: ectx: property (text), widget (QLabel, label_3)
 #: ktorrent/pref/recommendedsettingsdlg.ui:190
 #, kde-format
 msgid "Recommended settings:"
 msgstr "建議設定："
 
 #: ktorrent/statusbar.cpp:42 ktorrent/statusbar.cpp:74
 #, kde-format
 msgid "Speed down: %1 / up: %2"
 msgstr "速度：下載 %1/上傳 %2"
 
 #: ktorrent/statusbar.cpp:43 ktorrent/statusbar.cpp:85
 #, kde-format
 msgid "Transferred down: %1 / up: %2"
 msgstr "已傳輸：下載 %1/上傳 %2"
 
 #: ktorrent/statusbar.cpp:45 ktorrent/statusbar.cpp:100
 #, kde-format
 msgid "DHT: off"
 msgstr "DHT: 關"
 
 #: ktorrent/statusbar.cpp:98
 #, kde-format
 msgid "%1 node"
 msgid_plural "%1 nodes"
 msgstr[0] "%1 個節點"
 
 #: ktorrent/statusbar.cpp:98
 #, kde-format
 msgid "%1 task"
 msgid_plural "%1 tasks"
 msgstr[0] "%1 個工作"
 
 #: ktorrent/statusbar.cpp:98
 #, kde-format
 msgid "DHT: %1, %2"
 msgstr "DHT：%1，%2"
 
 #: ktorrent/tools/magnetmodel.cpp:120
 #, kde-format
 msgid "Magnet Link"
 msgstr "Magnet 連結"
 
 #: ktorrent/tools/magnetmodel.cpp:121 ktorrent/tools/queuemanagermodel.cpp:199
 #: ktorrent/trayicon.cpp:157 plugins/infowidget/trackermodel.cpp:150
 #: plugins/infowidget/webseedsmodel.cpp:131
 #, kde-format
 msgid "Status"
 msgstr "狀態"
 
 #: ktorrent/tools/magnetmodel.cpp:122
 #: plugins/infowidget/infowidgetplugin.cpp:224
 #, kde-format
 msgid "Peers"
 msgstr "端點"
 
 #: ktorrent/tools/magnetmodel.cpp:176
 #, kde-format
 msgid "Downloading"
 msgstr "下載中"
 
 #: ktorrent/tools/magnetmodel.cpp:179 ktorrent/tools/queuemanagermodel.cpp:240
 #, kde-format
 msgid "Queued"
 msgstr "已排入佇列"
 
 #: ktorrent/tools/magnetmodel.cpp:183
 #, kde-format
 msgid "Stopped"
 msgstr "已停止"
 
 #: ktorrent/tools/magnetview.cpp:66
 #, kde-format
 msgid "Start Magnet"
 msgstr "開始 Magnet"
 
 #: ktorrent/tools/magnetview.cpp:67
 #, kde-format
 msgid "Stop Magnet"
 msgstr "停止 Magnet"
 
 #: ktorrent/tools/magnetview.cpp:69
 #, kde-format
 msgid "Remove Magnet"
 msgstr "移除 Magnet"
 
 #: ktorrent/tools/queuemanagermodel.cpp:195
 #, kde-format
 msgid "Order"
 msgstr "排序"
 
 #: ktorrent/tools/queuemanagermodel.cpp:197 ktorrent/view/viewmodel.cpp:542
 #: plugins/downloadorder/downloadorderdialog.cpp:85
 #, kde-format
 msgid "Name"
 msgstr "名稱"
 
 #: ktorrent/tools/queuemanagermodel.cpp:201
 #, kde-format
 msgid "Time Stalled"
 msgstr "停頓時間"
 
 #: ktorrent/tools/queuemanagermodel.cpp:203
 #: plugins/infowidget/iwfilelistmodel.cpp:79
 #: plugins/infowidget/iwfiletreemodel.cpp:91
 #, kde-format
 msgid "Priority"
 msgstr "優先權"
 
 #: ktorrent/tools/queuemanagermodel.cpp:238
 #, kde-format
 msgid "Running"
 msgstr "執行中"
 
 #: ktorrent/tools/queuemanagermodel.cpp:242
 #, kde-format
 msgid "Not queued"
 msgstr "未排入佇列"
 
 #: ktorrent/tools/queuemanagermodel.cpp:251
 #, kde-format
 msgid "%1"
 msgstr "%1"
 
 #: ktorrent/tools/queuemanagermodel.cpp:264
 #, kde-format
 msgid ""
 "Order of a torrent in the queue.\n"
 "Use drag and drop or the move up and down buttons on the right to change the "
 "order."
 msgstr ""
 "將佇列中的 torrent 排序。\n"
 "用拖放的，或是用左方的上下按鍵來改變順序。"
 
 #: ktorrent/tools/queuemanagerwidget.cpp:61
 #: plugins/search/searchactivity.cpp:85 plugins/search/searchtoolbar.cpp:76
 #: plugins/search/webview.cpp:175
 #, kde-format
 msgid "Search"
 msgstr "搜尋"
 
 #: ktorrent/tools/queuemanagerwidget.cpp:70
 #, kde-format
 msgid "Show Search"
 msgstr "顯示搜尋"
 
 #: ktorrent/tools/queuemanagerwidget.cpp:71
 #, kde-format
 msgid "Show or hide the search bar"
 msgstr "顯示或隱藏搜尋列"
 
 #: ktorrent/tools/queuemanagerwidget.cpp:75
 #, kde-format
 msgid "Move Top"
 msgstr "移動到頂端"
 
 #: ktorrent/tools/queuemanagerwidget.cpp:76
 #, kde-format
 msgid "Move a torrent to the top of the queue"
 msgstr "將某個 torrent 移到佇列最頂端"
 
 #: ktorrent/tools/queuemanagerwidget.cpp:79
 #, kde-format
 msgid "Move a torrent up in the queue"
 msgstr "在佇列中將某個 torrent 上移"
 
 #: ktorrent/tools/queuemanagerwidget.cpp:82
 #, kde-format
 msgid "Move a torrent down in the queue"
 msgstr "在佇列中將某個 torrent 下移"
 
 #: ktorrent/tools/queuemanagerwidget.cpp:84
 #, kde-format
 msgid "Move Bottom"
 msgstr "移動到底端"
 
 #: ktorrent/tools/queuemanagerwidget.cpp:85
 #, kde-format
 msgid "Move a torrent to the bottom of the queue"
 msgstr "將某個 torrent 移到佇列最底端"
 
 #: ktorrent/tools/queuemanagerwidget.cpp:87
 #, kde-format
 msgid "Show Downloads"
 msgstr "顯示下載"
 
 #: ktorrent/tools/queuemanagerwidget.cpp:88
 #, kde-format
 msgid "Show all downloads"
 msgstr "顯示所有下載"
 
 #: ktorrent/tools/queuemanagerwidget.cpp:92
 #, kde-format
 msgid "Show Uploads"
 msgstr "顯示上傳"
 
 #: ktorrent/tools/queuemanagerwidget.cpp:93
 #, kde-format
 msgid "Show all uploads"
 msgstr "顯示所有上傳"
 
 #: ktorrent/tools/queuemanagerwidget.cpp:97
 #, kde-format
 msgid "Show Not Queued"
 msgstr "顯示未排入佇列"
 
 #: ktorrent/tools/queuemanagerwidget.cpp:98
 #, kde-format
 msgid "Show all not queued torrents"
 msgstr "顯示所有未排入佇列"
 
 #: ktorrent/torrentactivity.cpp:103
 #, kde-format
 msgid "Widget to manage the torrent queue"
 msgstr "管理 torrent 佇列的元件"
 
 #: ktorrent/torrentactivity.cpp:106
 #, kde-format
 msgid "Magnet Downloader"
 msgstr "Magnet 下載器"
 
 #: ktorrent/torrentactivity.cpp:107
 #, kde-format
 msgid "Displays the currently downloading magnet links"
 msgstr "顯示您正在下載的 magnet 連結"
 
 #: ktorrent/torrentactivity.cpp:122
 #, kde-format
 msgid "Start All"
 msgstr "全部開始"
 
 #: ktorrent/torrentactivity.cpp:123
 #, kde-format
 msgid "Start all torrents"
 msgstr "開始所有的 torrent"
 
 #: ktorrent/torrentactivity.cpp:127
 #, kde-format
 msgid "Stop All"
 msgstr "全部停止"
 
 #: ktorrent/torrentactivity.cpp:128
 #, kde-format
 msgid "Stop all torrents"
 msgstr "停止所有 torrent"
 
 #: ktorrent/torrentactivity.cpp:132
 #, kde-format
 msgid "Suspend Torrents"
 msgstr "暫停 torrent"
 
 #. i18n: ectx: property (text), widget (QCheckBox, m_suspended)
 #: ktorrent/torrentactivity.cpp:135 plugins/bwscheduler/edititemdlg.ui:106
 #, kde-format
 msgid "Suspend all running torrents"
 msgstr "暫停所有運行中的 torrents"
 
 #: ktorrent/torrentactivity.cpp:139
 #, kde-format
 msgid "Group View"
 msgstr "群組檢視"
 
 #: ktorrent/torrentactivity.cpp:140
 #, kde-format
 msgid "Show or hide the group view"
 msgstr "顯示或隱藏群組顯示"
 
 #: ktorrent/torrentactivity.cpp:144
 #, kde-format
 msgid "Filter Torrents"
 msgstr "過濾 Torrents"
 
 #: ktorrent/torrentactivity.cpp:145
 #, kde-format
 msgid "Filter torrents based on filter string"
 msgstr "依據過濾字串來過濾 torrents"
 
 #: ktorrent/trayicon.cpp:108
 #, kde-format
 msgid "Set max upload speed"
 msgstr "設定最大上傳速度"
 
 #: ktorrent/trayicon.cpp:110
 #, kde-format
 msgid "Set max download speed"
 msgstr "設定最大下載速度"
 
 #: ktorrent/trayicon.cpp:148
 #, kde-format
 msgid ""
 "Download speed: <b>%1</b><br/>Upload speed: <b>%2</b><br/>Received: <b>%3</"
 "b><br/>Transmitted: <b>%4</b>"
 msgstr ""
 "下載速度： <b>%1</b><br/>上傳速度：<b>%2</b><br/>已接收：<b>%3</b><br/>已傳"
 "送：<b>%4</b>"
 
 #: ktorrent/trayicon.cpp:187
 #, kde-format
 msgid "<b>%1</b> was silently opened."
 msgstr "<b>%1</b> 已無聲地開啟。"
 
 #: ktorrent/trayicon.cpp:201
 #, kde-format
 msgid "<b>%1</b> has completed downloading.<br>Average speed: %2 DL / %3 UL."
 msgstr "<b>%1</b> 已完成下載。<br/> 平均速度：下載 %2/上傳 %3"
 
 #: ktorrent/trayicon.cpp:218
 #, kde-format
 msgid ""
 "<b>%1</b> has reached its maximum share ratio of %2 and has been stopped."
 "<br>Uploaded %3 at an average speed of %4."
-msgstr ""
-"<b>%1</b> 已達最大分享比例 %2，已被停止。<br/> 已上傳 %3，平均速率 %4。"
+msgstr "<b>%1</b> 已達最大分享比例 %2，已被停止。<br/> 已上傳 %3，平均速率 %4。"
 
 #: ktorrent/trayicon.cpp:236
 #, kde-format
 msgid ""
 "<b>%1</b> has reached its maximum seed time of %2 hours and has been stopped."
 "<br>Uploaded %3 at an average speed of %4."
-msgstr ""
-"<b>%1</b> 已達最大播種時間 %2，已被停止。<br/> 已上傳 %3，平均速率 %4。"
+msgstr "<b>%1</b> 已達最大播種時間 %2，已被停止。<br/> 已上傳 %3，平均速率 %4。"
 
 #: ktorrent/trayicon.cpp:251
 #, kde-format
 msgid "<b>%1</b> has been stopped with the following error: <br>%2"
 msgstr "<b>%1</b> 已因以下錯誤停止: <br/>%2"
 
 #: ktorrent/trayicon.cpp:262
 #, kde-format
 msgid ""
 "Corrupted data has been found in the torrent <b>%1</b><br>It would be a good "
 "idea to do a data integrity check on the torrent."
-msgstr ""
-"在 torrent <b>%1</b> 中找到損毀的資料。最好是對該 torrent 做資料完整度檢查。"
+msgstr "在 torrent <b>%1</b> 中找到損毀的資料。最好是對該 torrent 做資料完整度檢查。"
 
 #: ktorrent/trayicon.cpp:278
 #, kde-format
 msgid ""
 "<b>%1</b> has reached its maximum share ratio of %2 and cannot be enqueued. "
 "<br>Remove the limit manually if you want to continue seeding."
 msgstr ""
 "<b>%1</b> 已達最大分享比例 %2，因此無法再排入佇列。 <br/>如果您要繼續播種的"
 "話，請先手動移除限制。"
 
 #: ktorrent/trayicon.cpp:282
 #, kde-format
 msgid ""
 "<b>%1</b> has reached its maximum seed time of %2 hours and cannot be "
 "enqueued. <br>Remove the limit manually if you want to continue seeding."
 msgstr ""
 "<b>%1</b> 已達最大播種時間 %2，因此無法再排入佇列。 <br/>如果您要繼續播種的"
 "話，請先手動移除限制。"
 
 #: ktorrent/trayicon.cpp:294
 #, kde-format
 msgid "Cannot start <b>%1</b>: <br>"
 msgstr "無法開始 <b>%1</b>：<br/>"
 
 #: ktorrent/trayicon.cpp:301
 #, kde-format
 msgid "Cannot seed more than 1 torrent. <br>"
 msgid_plural "Cannot seed more than %1 torrents. <br>"
 msgstr[0] "不能同時為多於 %1 個torrent 作種"
 
 #: ktorrent/trayicon.cpp:306
 #, kde-format
 msgid "Cannot download more than 1 torrent. <br>"
 msgid_plural "Cannot download more than %1 torrents. <br>"
 msgstr[0] "不能同時下載多於 %1 個torrent <br/>"
 
 #: ktorrent/trayicon.cpp:309
 #, kde-format
 msgid "Go to Settings -> Configure KTorrent, if you want to change the limits."
 msgstr " 如要更改限制 , 請按設定 -> 設定 KTorrent "
 
 #: ktorrent/trayicon.cpp:313
 #, kde-format
 msgid "There is not enough diskspace available."
 msgstr "硬碟空間不足"
 
 #: ktorrent/trayicon.cpp:326
 #, kde-format
 msgid ""
 "Your disk is running out of space.<br /><b>%1</b> is being downloaded to "
 "'%2'."
 msgstr "硬碟空間即將耗盡。<br /><b>%1</b> 正被下載到 '%2'. "
 
 #: ktorrent/trayicon.cpp:329
 #, kde-format
 msgid "Torrent has been stopped.<br />"
 msgstr "Torrent 已被停止 <br />"
 
 #: ktorrent/trayicon.cpp:365
 #, kde-format
 msgid "Speed limit in KiB/s"
 msgstr "速度限制 (KB/秒)"
 
 #: ktorrent/trayicon.cpp:367 plugins/bwscheduler/schedulegraphicsitem.cpp:95
 #: plugins/bwscheduler/schedulegraphicsitem.cpp:96
 #, kde-format
 msgid "Unlimited"
 msgstr "無限"
 
 #: ktorrent/view/propertiesdlg.cpp:33
 #, kde-format
 msgid "Torrent Settings"
 msgstr "Torrent 設定"
 
 #. i18n: ectx: property (windowTitle), widget (QDialog, PropertiesDlg)
 #: ktorrent/view/propertiesdlg.ui:14 plugins/scripting/scriptmanager.cpp:117
 #, kde-format
 msgid "Properties"
 msgstr "屬性"
 
 #. i18n: ectx: property (toolTip), widget (QCheckBox, dht)
 #: ktorrent/view/propertiesdlg.ui:20
 #, kde-format
 msgid ""
 "DHT is a distributed database which can be used to find more peers for a "
 "torrent."
 msgstr "DHT 是一種分散式的資料庫，用於尋找更多 torrent 的端點。"
 
 #. i18n: ectx: property (text), widget (QCheckBox, dht)
 #: ktorrent/view/propertiesdlg.ui:23
 #, kde-format
 msgid "Use DHT to find more peers"
 msgstr "利用 DHT 找到額外的端點"
 
 #. i18n: ectx: property (toolTip), widget (QCheckBox, pex)
 #: ktorrent/view/propertiesdlg.ui:30
 #, kde-format
 msgid ""
 "Peer exchange results in more peers being found, by exchanging information "
 "about peers with other peers."
 msgstr "端點交換可以找到更多端點，因為它會與其它端點交換這些資料。"
 
 #. i18n: ectx: property (text), widget (QCheckBox, pex)
 #: ktorrent/view/propertiesdlg.ui:33
 #, kde-format
 msgid "Use peer exchange to find more peers"
 msgstr "使用端點交換來尋找更多端點"
 
 #. i18n: ectx: property (toolTip), widget (QCheckBox, superseeding)
 #: ktorrent/view/propertiesdlg.ui:42
 #, kde-format
 msgid ""
 "<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-"
 "right:0px; -qt-block-indent:0; text-indent:0px;\">Superseeding mode, is a "
 "special seeding mode which allows you to achieve much higher seeding "
 "efficiencies. This results in less bandwidth used to spread a torrent.</p>\n"
 "<p style=\"-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; "
 "margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"></"
 "p>\n"
 "<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-"
 "right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-"
 "weight:600;\">Note: </span>This should only be used if the swarm has not "
 "fully been established. Once there are multiple active seeders, this mode "
 "becomes useless.</p>"
 msgstr ""
 "<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-"
 "right:0px; -qt-block-indent:0; text-indent:0px;\">超級播種模式"
 "（superseeding）是一種讓您播種效率更高的模式。它可以用較少的頻寬來散布一個 "
 "torrent。</p>\n"
 "<p style=\"-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; "
 "margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"></"
 "p>\n"
 "<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-"
 "right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-"
 "weight:600;\">注意：</span>這只能用於尚未有很多播種者時。若是有多個播種者，則"
 "此模式就沒什麼用了。</p>"
 
 #. i18n: ectx: property (text), widget (QCheckBox, superseeding)
 #: ktorrent/view/propertiesdlg.ui:45
 #, kde-format
 msgid "Use superseeding mode for seeding"
 msgstr "使用超級播種模式來播種"
 
 #. i18n: ectx: property (toolTip), widget (QCheckBox, move_on_completion_enabled)
 #: ktorrent/view/propertiesdlg.ui:52
 #, kde-format
 msgid ""
 "Move the files of the torrent to a different directory when it has finished "
 "downloading."
 msgstr "當 torrent 完成下載後將資料移動到另一個目錄。"
 
 #. i18n: ectx: property (toolTip), widget (KUrlRequester, move_on_completion_url)
 #: ktorrent/view/propertiesdlg.ui:62
 #, kde-format
 msgid "Location to move the files to."
 msgstr "把資料移到那裡。"
 
 #: ktorrent/view/scanextender.cpp:51
 #, kde-format
 msgid "Checked %v of %m chunks"
 msgstr "已檢查 %v 個區塊，共 %m 個"
 
 #: ktorrent/view/scanextender.cpp:133
 #, kde-format
 msgid "<font color=\"red\">%1</font>"
 msgstr "<font color=\"red\">%1</font>"
 
 #. i18n: ectx: property (text), widget (QLabel, textLabel2)
 #: ktorrent/view/scanextender.ui:21
 #, kde-format
 msgid "Found:"
 msgstr "已找到："
 
 #. i18n: ectx: property (toolTip), widget (QLabel, chunks_found)
 #: ktorrent/view/scanextender.ui:43
 #, kde-format
 msgid ""
 "The number of chunks which were not downloaded but have been found anyway."
 msgstr "尚未下載，但已找到的區塊數。"
 
 #. i18n: ectx: property (text), widget (QLabel, chunks_found)
 #. i18n: ectx: property (text), widget (QLabel, chunks_failed)
 #. i18n: ectx: property (text), widget (QLabel, chunks_not_downloaded)
 #. i18n: ectx: property (text), widget (QLabel, chunks_downloaded)
 #: ktorrent/view/scanextender.ui:49 ktorrent/view/scanextender.ui:91
 #: ktorrent/view/scanextender.ui:136 ktorrent/view/scanextender.ui:175
 #, kde-format
 msgid "0"
 msgstr "0"
 
 #. i18n: ectx: property (text), widget (QLabel, textLabel3)
 #: ktorrent/view/scanextender.ui:66
 #, kde-format
 msgid "Failed:"
 msgstr "失敗："
 
 #. i18n: ectx: property (toolTip), widget (QLabel, chunks_failed)
 #: ktorrent/view/scanextender.ui:82
 #, kde-format
 msgid "The number of chunks which have been downloaded, and which are not OK."
 msgstr "已下載，但不正確的區塊數。"
 
 #. i18n: ectx: property (text), widget (QLabel, label)
 #: ktorrent/view/scanextender.ui:108
 #, kde-format
 msgid "Not downloaded:"
 msgstr "未下載："
 
 #. i18n: ectx: property (toolTip), widget (QLabel, chunks_not_downloaded)
 #: ktorrent/view/scanextender.ui:127
 #, kde-format
 msgid "The number of chunks which have not been downloaded."
 msgstr "尚未下載的區塊數。"
 
 #. i18n: ectx: property (text), widget (QLabel, label_2)
 #. i18n: ectx: property (text), widget (QLabel, textLabel3)
 #: ktorrent/view/scanextender.ui:153 plugins/infowidget/chunkdownloadview.ui:98
 #, kde-format
 msgid "Downloaded:"
 msgstr "已下載:"
 
 #. i18n: ectx: property (toolTip), widget (QLabel, chunks_downloaded)
 #: ktorrent/view/scanextender.ui:166
 #, kde-format
 msgid "The number of chunks which have been downloaded, and which are OK."
 msgstr "已下載並經檢查沒問題的區塊數。"
 
 #. i18n: ectx: property (text), widget (QLabel, error_msg)
 #: ktorrent/view/scanextender.ui:230
 #, kde-format
 msgid "Errors:"
 msgstr "錯誤："
 
 #: ktorrent/view/torrentsearchbar.cpp:49
-#, fuzzy, kde-format
+#, kde-format
 #| msgid "Filter"
 msgid "Filter..."
-msgstr "過濾器"
+msgstr "篩選…"
 
 #: ktorrent/view/view.cpp:143
 #, kde-format
 msgctxt "@action Start all selected torrents in the current tab"
 msgid "Start"
 msgstr "開始"
 
 #: ktorrent/view/view.cpp:144
 #, kde-format
 msgid "Start all selected torrents in the current tab"
 msgstr "開始目前分頁中所有選取的 torrent"
 
 #: ktorrent/view/view.cpp:149
 #, kde-format
 msgctxt "@action Force start all selected torrents in the current tab"
 msgid "Force Start"
 msgstr "強制開始"
 
 #: ktorrent/view/view.cpp:150
 #, kde-format
 msgid "Force start all selected torrents in the current tab"
 msgstr "強制開始目前分頁中所有選取的 torrent"
 
 #: ktorrent/view/view.cpp:154
 #, kde-format
 msgctxt "@action Stop all selected torrents in the current tab"
 msgid "Stop"
 msgstr "停止"
 
 #: ktorrent/view/view.cpp:155
 #, kde-format
 msgid "Stop all selected torrents in the current tab"
 msgstr "停止目前分頁中所有選取的 torrent"
 
 #: ktorrent/view/view.cpp:160
 #, kde-format
 msgctxt "@action Pause all selected torrents in the current tab"
 msgid "Pause"
 msgstr "暫停"
 
 #: ktorrent/view/view.cpp:161
 #, kde-format
 msgid "Pause all selected torrents in the current tab"
 msgstr "暫停目前分頁中所有選取的 torrent"
 
 #: ktorrent/view/view.cpp:165
 #, kde-format
 msgctxt "@action Remove all selected torrents in the current tab"
 msgid "Remove"
 msgstr "移除"
 
 #: ktorrent/view/view.cpp:166
 #, kde-format
 msgid "Remove all selected torrents in the current tab"
 msgstr "移除目前分頁中所有選取的 torrent"
 
 #: ktorrent/view/view.cpp:171
 #, kde-format
 msgctxt "@action Start all torrents in the current tab"
 msgid "Start All"
 msgstr "全部開始"
 
 #: ktorrent/view/view.cpp:172
 #, kde-format
 msgid "Start all torrents in the current tab"
 msgstr "開始目前分頁中所有的 torrent"
 
 #: ktorrent/view/view.cpp:177
 #, kde-format
 msgctxt "@action Stop all torrents in the current tab"
 msgid "Stop All"
 msgstr "全部停止"
 
 #: ktorrent/view/view.cpp:178
 #, kde-format
 msgid "Stop all torrents in the current tab"
 msgstr "停止目前分頁中所有的 torrent"
 
 #: ktorrent/view/view.cpp:183
 #, kde-format
 msgid "Remove Torrent and Data"
 msgstr "移除torrent 和已下載資料"
 
 #: ktorrent/view/view.cpp:188
 #, kde-format
 msgid "Rename Torrent"
 msgstr "重新命名 torrent"
 
 #: ktorrent/view/view.cpp:192
 #, kde-format
 msgid "Add Peers"
 msgstr "新增端點"
 
 #: ktorrent/view/view.cpp:196
 #, kde-format
 msgid "Manual Announce"
 msgstr "手動宣告"
 
 #: ktorrent/view/view.cpp:201
 #, kde-format
 msgid "Scrape"
 msgstr "Scrape"
 
 #: ktorrent/view/view.cpp:205
 #, kde-format
 msgid "Preview"
 msgstr "預覽"
 
 #: ktorrent/view/view.cpp:209
 #, kde-format
 msgid "Data Directory"
 msgstr "KTorrent 排程檔案"
 
 #: ktorrent/view/view.cpp:213
 #, kde-format
 msgid "Temporary Directory"
 msgstr "暫存資料目錄"
 
 #: ktorrent/view/view.cpp:217
 #, kde-format
 msgid "Move Data"
 msgstr "搬移資料"
 
 #. i18n: ectx: property (windowTitle), widget (QWidget, StatsSettingsWgt)
 #: ktorrent/view/view.cpp:221 plugins/stats/Settings.ui:13
 #, kde-format
 msgid "Settings"
 msgstr "設定"
 
 #: ktorrent/view/view.cpp:225
 #, kde-format
 msgid "Remove from Group"
 msgstr "從群組中移除"
 
 #: ktorrent/view/view.cpp:233
 #, kde-format
 msgid "Check Data"
 msgstr "檢查資料"
 
 #: ktorrent/view/view.cpp:234
 #, kde-format
 msgid "Check all the data of a torrent"
 msgstr "檢查 torrent 中所有資料"
 
 #: ktorrent/view/view.cpp:256
 #, kde-format
 msgid "Copy Torrent URL"
 msgstr "複製 torrent 網址"
 
 #: ktorrent/view/view.cpp:260
 #, kde-format
 msgid "Export Torrent"
 msgstr "匯出 Torrent"
 
 #: ktorrent/view/view.cpp:265
 #, kde-format
 msgid "Set the speed limits of individual torrents"
 msgstr "設定個別 torrent 的速度限制"
 
 #: ktorrent/view/view.cpp:474
 #, kde-format
 msgid ""
 "The torrent <b>%1</b> has not finished downloading, do you want to delete "
 "the incomplete data, too?"
 msgstr "Torrent %1 尚未完成下載，您要一起刪除不完整的資料嗎？"
 
 #: ktorrent/view/view.cpp:479
 #, kde-format
 msgid "Remove Download"
 msgstr "移除下載"
 
 #: ktorrent/view/view.cpp:480
 #, kde-format
 msgid "Delete Data"
 msgstr "删除資料"
 
 #: ktorrent/view/view.cpp:481
 #, kde-format
 msgid "Keep Data"
 msgstr "保存資料"
 
 #: ktorrent/view/view.cpp:506
 #, kde-format
 msgid ""
 "You will lose all the downloaded data of the following torrents. Are you "
 "sure you want to do this?"
 msgstr "您將會失去以下的 torrents 所有已下載的資料。您確定要這樣做?"
 
 #: ktorrent/view/view.cpp:507
 #, kde-format
 msgid "Remove Torrent"
 msgstr "移除torrent"
 
 #: ktorrent/view/view.cpp:604 plugins/infowidget/fileview.cpp:357
 #: plugins/infowidget/fileview.cpp:383
 #, kde-format
 msgid "Select a directory to move the data to."
 msgstr "選擇把資料移到那個"
 
 #: ktorrent/view/viewmodel.cpp:544 plugins/infowidget/peerviewmodel.cpp:277
 #: plugins/infowidget/webseedsmodel.cpp:130
 #, kde-format
 msgid "Downloaded"
 msgstr "已下載"
 
 #: ktorrent/view/viewmodel.cpp:546
 #: libktcore/torrent/torrentfilelistmodel.cpp:82
 #: libktcore/torrent/torrentfiletreemodel.cpp:398
 #, kde-format
 msgid "Size"
 msgstr "大小"
 
 #: ktorrent/view/viewmodel.cpp:548 plugins/infowidget/peerviewmodel.cpp:278
 #, kde-format
 msgid "Uploaded"
 msgstr "已上傳"
 
 #: ktorrent/view/viewmodel.cpp:550
 #, kde-format
 msgctxt "Bytes left to downloaded"
 msgid "Left"
 msgstr "剩餘位元組數"
 
 #: ktorrent/view/viewmodel.cpp:552
 #: plugins/infowidget/chunkdownloadmodel.cpp:204
 #: plugins/infowidget/peerviewmodel.cpp:268
 #, kde-format
 msgid "Down Speed"
 msgstr "下載速度"
 
 #: ktorrent/view/viewmodel.cpp:554 plugins/infowidget/peerviewmodel.cpp:269
 #, kde-format
 msgid "Up Speed"
 msgstr "上傳速度"
 
 #: ktorrent/view/viewmodel.cpp:556
 #, kde-format
 msgid "Time Left"
 msgstr "剩餘時間"
 
 #: ktorrent/view/viewmodel.cpp:558 plugins/infowidget/trackermodel.cpp:151
 #, kde-format
 msgid "Seeders"
 msgstr "傳送者："
 
 #: ktorrent/view/viewmodel.cpp:560 plugins/infowidget/trackermodel.cpp:152
 #, kde-format
 msgid "Leechers"
 msgstr "接收者"
 
 #: ktorrent/view/viewmodel.cpp:563
 #, no-c-format, kde-format
 msgid "% Complete"
 msgstr "% 完成"
 
 #: ktorrent/view/viewmodel.cpp:565
 #, kde-format
 msgid "Share Ratio"
 msgstr "分享比例"
 
 #: ktorrent/view/viewmodel.cpp:567
 #, kde-format
 msgid "Time Downloaded"
 msgstr "下載已用時間"
 
 #: ktorrent/view/viewmodel.cpp:569
 #, kde-format
 msgid "Time Seeded"
 msgstr "播種時間"
 
 #: ktorrent/view/viewmodel.cpp:571
 #, kde-format
 msgid "Location"
 msgstr "位置"
 
 #: ktorrent/view/viewmodel.cpp:573
 #, kde-format
 msgid "Added"
 msgstr "已增加"
 
 #: ktorrent/view/viewmodel.cpp:583
 #, kde-format
 msgid "How much data we have downloaded of the torrent"
 msgstr "對此 torrent 我們已經下載了多少資料"
 
 #: ktorrent/view/viewmodel.cpp:585
 #, kde-format
 msgid "Total size of the torrent, excluded files are not included"
 msgstr "torrent 的全部大小，不含被排除的檔案"
 
 #: ktorrent/view/viewmodel.cpp:587
 #, kde-format
 msgid "How much data we have uploaded"
 msgstr "我們已上傳了多少資料"
 
 #: ktorrent/view/viewmodel.cpp:589
 #, kde-format
 msgid "How much data left to download"
 msgstr "還有多少資料要下載"
 
 #: ktorrent/view/viewmodel.cpp:591
 #, kde-format
 msgid "Current download speed"
 msgstr "目前下載速度"
 
 #: ktorrent/view/viewmodel.cpp:593
 #, kde-format
 msgid "Current upload speed"
 msgstr "目前上傳速度"
 
 #: ktorrent/view/viewmodel.cpp:595
 #, kde-format
 msgid ""
 "How much time is left before the torrent is finished or before the maximum "
 "share ratio is reached, if that is enabled"
 msgstr "還需要多少時間可以完成此 torrent，或是答到最大分享比例"
 
 #: ktorrent/view/viewmodel.cpp:597
 #, kde-format
 msgid ""
 "How many seeders we are connected to (How many seeders there are according "
 "to the tracker)"
 msgstr "根據追蹤器的資料，我們連線到多少個播種者"
 
 #: ktorrent/view/viewmodel.cpp:599
 #, kde-format
 msgid ""
 "How many leechers we are connected to (How many leechers there are according "
 "to the tracker)"
 msgstr "根據追蹤器的資料，我們有多少要求下載的連線"
 
 #: ktorrent/view/viewmodel.cpp:602
 #, kde-format
 msgid ""
 "The percentage of data we have of the whole torrent, not including excluded "
 "files"
 msgstr "我們已經有了整個 torrent 中多少百分比的資料，不含被排除的檔案"
 
 #: ktorrent/view/viewmodel.cpp:604
 #, kde-format
 msgid ""
 "Share ratio is the number of bytes uploaded divided by the number of bytes "
 "downloaded"
 msgstr "分享比例就是上傳位元數除以下載位元數的值"
 
 #: ktorrent/view/viewmodel.cpp:606
 #, kde-format
 msgid "How long we have been downloading the torrent"
 msgstr "此 torrent 已經下載了多久"
 
 #: ktorrent/view/viewmodel.cpp:608
 #, kde-format
 msgid "How long we have been seeding the torrent"
 msgstr "此 torrent 已經播種了多久"
 
 #: ktorrent/view/viewmodel.cpp:610
 #, kde-format
 msgid "The location of the torrent's data on disk"
 msgstr "此 torrent 在磁碟上的位置"
 
 #: ktorrent/view/viewmodel.cpp:612
 #, kde-format
 msgid "When this torrent was added"
 msgstr "當此 torrent 已被新增時"
 
 #: ktorrent/view/viewmodel.cpp:663
 #, kde-format
 msgid "%1<br>Url: <b>%2</b>"
 msgstr "%1<br/> 網址：<b>%2</b>"
 
 #: ktorrent/view/viewmodel.cpp:669
 #, kde-format
 msgid "<br/><br/>Unable to contact a tracker."
 msgstr "<br/><br/>無法聯繫追蹤器。"
 
 #: ktupnptest/main.cpp:39
 #, kde-format
 msgid "KTUPnPTest"
 msgstr "KTUPnP 測試 "
 
 #: ktupnptest/main.cpp:40
 #, kde-format
 msgid "KTorrent's UPnP test application"
 msgstr "KTorrent 的 UPnP 測試程式"
 
 #: ktupnptest/main.cpp:42
 #, kde-format
 msgid "&copy; 2005 - 2007 Joris Guisson and Ivan Vasic"
 msgstr "&copy; 2005 - 2007 Joris Guisson 和 Ivan Vasic"
 
 #. i18n: ectx: property (windowTitle), widget (QWidget, UPnPTestWidget)
 #: ktupnptest/upnptestwidget.ui:14
 #, kde-format
 msgid "UPnP Test Application"
 msgstr "UPnP 測試應用程式"
 
 #. i18n: ectx: property (text), widget (QLabel, label_3)
 #: ktupnptest/upnptestwidget.ui:24
 #, kde-format
 msgid "Router:"
 msgstr "路由器："
 
 #. i18n: ectx: property (text), widget (QLabel, m_router)
 #: ktupnptest/upnptestwidget.ui:40
 #, kde-format
 msgid "No routers found."
 msgstr "找不到適用的路由器。"
 
 #. i18n: ectx: property (text), widget (QPushButton, m_find_routers)
 #: ktupnptest/upnptestwidget.ui:49
 #, kde-format
 msgid "Find Routers"
 msgstr "尋找路由器"
 
 #. i18n: ectx: property (text), widget (QLabel, label_2)
 #: ktupnptest/upnptestwidget.ui:89
 #, kde-format
 msgid "Protocol:"
 msgstr "協定："
 
 #. i18n: ectx: property (text), item, widget (QComboBox, m_protocol)
 #: ktupnptest/upnptestwidget.ui:97
 #, kde-format
 msgid "UDP"
 msgstr "UDP"
 
 #. i18n: ectx: property (text), widget (QPushButton, m_forward)
 #: ktupnptest/upnptestwidget.ui:125 plugins/upnp/upnpwidget.ui:27
 #, kde-format
 msgid "Forward"
 msgstr "轉送"
 
 #. i18n: ectx: property (text), widget (QPushButton, m_undo_forward)
 #: ktupnptest/upnptestwidget.ui:132 plugins/upnp/upnpwidget.ui:34
 #, kde-format
 msgid "Undo Forward"
 msgstr "復原轉送"
 
 #. i18n: ectx: property (text), widget (QCheckBox, m_verbose)
 #: ktupnptest/upnptestwidget.ui:139
 #, kde-format
 msgid "Verbose mode"
 msgstr "囉唆模式"
 
 #: libktcore/dbus/dbustorrent.cpp:322
 #, kde-format
 msgid "Maximum share ratio reached."
 msgstr "已達最大分享比例限制。"
 
 #: libktcore/dbus/dbustorrent.cpp:325
 #, kde-format
 msgid "Maximum seed time reached."
 msgstr "已達最大播種時間。"
 
 #: libktcore/groups/groupmanager.cpp:105
 #, kde-format
 msgid "Uploads"
 msgstr "上傳"
 
 #: libktcore/groups/groupmanager.cpp:107
 #, kde-format
 msgid "Running Uploads"
 msgstr "執行上傳中"
 
 #: libktcore/groups/groupmanager.cpp:109
 #, kde-format
 msgid "Not Running Uploads"
 msgstr "未執行上傳"
 
 #: libktcore/groups/groupmanager.cpp:113
 #, kde-format
 msgid "Downloads"
 msgstr "下載"
 
 #: libktcore/groups/groupmanager.cpp:115
 #, kde-format
 msgid "Running Downloads"
 msgstr "執行下載中"
 
 #: libktcore/groups/groupmanager.cpp:117
 #, kde-format
 msgid "Not Running Downloads"
 msgstr "未執行下載"
 
 #: libktcore/groups/groupmanager.cpp:121
 #, kde-format
 msgid "Active Torrents"
 msgstr "動作中的 torrent"
 
 #: libktcore/groups/groupmanager.cpp:123
 #, kde-format
 msgid "Active Downloads"
 msgstr "動作中的下載"
 
 #: libktcore/groups/groupmanager.cpp:125
 #, kde-format
 msgid "Active Uploads"
 msgstr "動作中的上傳"
 
 #: libktcore/groups/groupmanager.cpp:127
 #, kde-format
 msgid "Passive Torrents"
 msgstr "被動的 torrent"
 
 #: libktcore/groups/groupmanager.cpp:129
 #, kde-format
 msgid "Passive Downloads"
 msgstr "被動的下載"
 
 #: libktcore/groups/groupmanager.cpp:131
 #, kde-format
 msgid "Passive Uploads"
 msgstr "被動的上傳"
 
 #: libktcore/groups/ungroupedgroup.cpp:30
 #, kde-format
 msgid "Ungrouped Torrents"
 msgstr "未分組的 torrent"
 
 #: libktcore/interfaces/functions.cpp:182
 #, kde-format
 msgctxt "*.torrent"
 msgid "Torrents"
 msgstr "Torrent"
 
 #: libktcore/interfaces/functions.cpp:184
 #: plugins/scripting/scriptingplugin.cpp:189
 #, kde-format
 msgid "All files"
 msgstr "全部檔案"
 
 #. i18n: ectx: label, entry (maxDownloads), group (downloads)
 #: libktcore/ktorrent.kcfg:10
 #, kde-format
 msgid "Maximum number of downloads (0 = no limit)"
 msgstr "下載最大數量（0 表示不限制）："
 
 #. i18n: ectx: label, entry (maxSeeds), group (downloads)
 #: libktcore/ktorrent.kcfg:15
 #, kde-format
 msgid "Maximum number of seeds (0 = no limit)"
 msgstr "最大播種數（0 表示不限制）"
 
 #. i18n: ectx: label, entry (startDownloadsOnLowDiskSpace), group (downloads)
 #: libktcore/ktorrent.kcfg:20
 #, kde-format
 msgid "Start downloads on low disk space?"
 msgstr "要在磁碟空間偏少的時候開始下載嗎？"
 
 #. i18n: ectx: label, entry (maxConnections), group (downloads)
 #: libktcore/ktorrent.kcfg:25
 #, kde-format
 msgid "Maximum number of connections per torrent (0 = no limit)"
 msgstr "每個 torrent 允許的最大連線數量（0 表示不限制）"
 
 #. i18n: ectx: label, entry (maxTotalConnections), group (downloads)
 #: libktcore/ktorrent.kcfg:30
 #, kde-format
 msgid "Maximum number of connections for all torrents (0 = no limit) "
 msgstr "所有 torrent 允許的最大連線數量（0 表示不限制）"
 
 #. i18n: ectx: label, entry (maxUploadRate), group (downloads)
 #: libktcore/ktorrent.kcfg:35
 #, kde-format
 msgid "Maximum upload speed in KiB/sec (0 = no limit)"
 msgstr "最大上傳速度 (KB/s)（0 表示不限制）"
 
 #. i18n: ectx: label, entry (maxDownloadRate), group (downloads)
 #: libktcore/ktorrent.kcfg:40
 #, kde-format
 msgid "Maximum download speed in KiB/sec (0 = no limit)"
 msgstr "最大下載速度 (KB/s)（0 表示不限制）"
 
 #. i18n: ectx: label, entry (maxRatio), group (downloads)
 #: libktcore/ktorrent.kcfg:45
 #, kde-format
 msgid "Maximum share ratio (0 = no limit)"
 msgstr "最大分享比例限制（0 表示不限制）"
 
 #. i18n: ectx: label, entry (showSystemTrayIcon), group (downloads)
 #: libktcore/ktorrent.kcfg:66
 #, kde-format
 msgid "Show a system tray icon"
 msgstr "顯示系統匣圖示"
 
 #. i18n: ectx: label, entry (showTotalSpeedInTitle), group (downloads)
 #: libktcore/ktorrent.kcfg:70
 #, kde-format
 msgid "Show a total speeds in the title"
 msgstr "在標題內顯示總速度"
 
 #. i18n: ectx: label, entry (showSpeedBarInTrayIcon), group (downloads)
 #: libktcore/ktorrent.kcfg:74
 #, kde-format
 msgid "Show speed bar in tray icon"
 msgstr "在系統匣顯示速度列"
 
 #. i18n: ectx: label, entry (downloadBandwidth), group (downloads)
 #: libktcore/ktorrent.kcfg:78
 #, kde-format
 msgid "Download bandwidth (in kb/s):"
 msgstr "下載頻寬（KB/s）："
 
 #. i18n: ectx: label, entry (uploadBandwidth), group (downloads)
 #: libktcore/ktorrent.kcfg:84
 #, kde-format
 msgid "Upload bandwidth (in kb/s):"
 msgstr "上傳頻寬（KB/s）："
 
 #. i18n: ectx: label, entry (showPopups), group (downloads)
 #: libktcore/ktorrent.kcfg:90
 #, kde-format
 msgid "Show popup messages when torrent is finished."
 msgstr "torrent 完成後顯示彈出視窗訊息。"
 
 #. i18n: ectx: label, entry (keepSeeding), group (downloads)
 #: libktcore/ktorrent.kcfg:94
 #, kde-format
 msgid "Keep seeding after download has finished"
 msgstr "下載完成後持續播種"
 
 #. i18n: ectx: label, entry (tempDir), group (downloads)
 #: libktcore/ktorrent.kcfg:98
 #, kde-format
 msgid "Folder to store temporary files"
 msgstr "儲存暫存檔的資料夾："
 
 #. i18n: ectx: label, entry (useSaveDir), group (downloads)
 #: libktcore/ktorrent.kcfg:101
 #, kde-format
 msgid "Whether to automatically save downloads to saveDir"
 msgstr "是否要將下載檔案自動儲存到儲存資料夾"
 
 #. i18n: ectx: label, entry (saveDir), group (downloads)
 #: libktcore/ktorrent.kcfg:105
 #, kde-format
 msgid "Folder to store downloaded files"
 msgstr "儲存下載檔案的資料夾："
 
 #. i18n: ectx: label, entry (useTorrentCopyDir), group (downloads)
 #: libktcore/ktorrent.kcfg:108
 #, kde-format
 msgid "Whether to automatically copy .torrent files to torrentCopyDir"
 msgstr "是否要自動將 .torrent 檔複製到複製目錄"
 
 #. i18n: ectx: label, entry (torrentCopyDir), group (downloads)
 #: libktcore/ktorrent.kcfg:112
 #, kde-format
 msgid "Folder to copy .torrent files to"
 msgstr "複製 torrent 檔的資料夾"
 
 #. i18n: ectx: label, entry (useCustomIP), group (downloads)
 #: libktcore/ktorrent.kcfg:115
 #, kde-format
 msgid "Whether to use a custom IP to pass to the tracker"
 msgstr "是否要自訂傳送給追蹤器的 IP"
 
 #. i18n: ectx: label, entry (lastSaveDir), group (downloads)
 #: libktcore/ktorrent.kcfg:119
 #, kde-format
 msgid "Directory which was used as the last save directory"
 msgstr "用於最後儲存的目錄"
 
 #. i18n: ectx: label, entry (customIP), group (downloads)
 #: libktcore/ktorrent.kcfg:123
 #, kde-format
 msgid "IP to pass to the tracker"
 msgstr "傳送給追蹤器的 IP"
 
 #. i18n: ectx: label, entry (guiUpdateInterval), group (downloads)
 #: libktcore/ktorrent.kcfg:127
 #, kde-format
 msgid "GUI update interval"
 msgstr "GUI 更新間隔"
 
 #. i18n: ectx: label, entry (dhtSupport), group (downloads)
 #: libktcore/ktorrent.kcfg:133
 #, kde-format
 msgid "Support for DHT"
 msgstr "支援 DHT"
 
 #. i18n: ectx: label, entry (dhtPort), group (downloads)
 #: libktcore/ktorrent.kcfg:137
 #, kde-format
 msgid "DHT port"
 msgstr "DHT 連接埠"
 
 #. i18n: ectx: label, entry (numUploadSlots), group (downloads)
 #: libktcore/ktorrent.kcfg:146
 #, kde-format
 msgid "Number of upload slots"
 msgstr "上傳槽的數量"
 
 #. i18n: ectx: label, entry (shownColumns), group (downloads)
 #: libktcore/ktorrent.kcfg:178
 #, kde-format
 msgid "Columns shown in KTorrentView"
 msgstr "KTorrent 檢視顯示的欄位數"
 
 #. i18n: ectx: label, entry (minDiskSpace), group (downloads)
 #: libktcore/ktorrent.kcfg:229
 #, kde-format
 msgid ""
 "When there is no space left to complete download, and the available disk "
 "space is less than this value, the torrent will be stopped."
 msgstr ""
 "當沒有足夠空間可以下載，以及可用的磁碟空間低於此大小時，torrent 將會停止動"
 "作。"
 
 #. i18n: ectx: label, entry (useCompletedDir), group (downloads)
 #: libktcore/ktorrent.kcfg:240
 #, kde-format
 msgid "Whether to automatically move completed downloads to completedDir"
 msgstr "是否要自動將完成的下載移到完成資料夾。"
 
 #. i18n: ectx: label, entry (completedDir), group (downloads)
 #: libktcore/ktorrent.kcfg:244
 #, kde-format
 msgid "Folder to move completed downloaded files to"
 msgstr "把已完成的下載檔案移到哪個資料夾"
 
 #. i18n: ectx: label, entry (maxSeedTime), group (downloads)
 #: libktcore/ktorrent.kcfg:247
 #, kde-format
 msgid "Maximum seed time in hours (0 = no limit)"
 msgstr "最大播種時間（小時，0 表示不限制）"
 
 #: libktcore/plugin/pluginactivity.cpp:39
 #: libktcore/plugin/pluginactivity.cpp:56
 #, kde-format
 msgid "Plugins"
 msgstr "外掛程式"
 
 #: libktcore/torrent/basicjobprogresswidget.cpp:54
 #, kde-format
 msgid "%1: %2<br/>%3: %4"
 msgstr "%1：%2<br/>%3：%4"
 
 #: libktcore/torrent/basicjobprogresswidget.cpp:69
 #, kde-format
 msgid "Warning: %1"
 msgstr "警告：%1"
 
 #: libktcore/torrent/chunkbar.cpp:94
 #, kde-format
 msgid ""
 "<img src=\"available_color\">&nbsp; - Downloaded Chunks<br><img src="
 "\"unavailable_color\">&nbsp; - Chunks to Download<br><img src="
 "\"excluded_color\">&nbsp; - Excluded Chunks"
 msgstr ""
 "<img src=\"available_color\">&nbsp;─已下載區塊<br/> <img src="
 "\"unavailable_color\">&nbsp;─要下載的區塊<br/> <img src=\"excluded_color"
 "\">&nbsp;─排除的區塊"
 
 #: libktcore/torrent/queuemanager.cpp:118
 #, kde-format
 msgid ""
 "The torrent \"%1\" has reached its maximum share ratio and its maximum seed "
 "time. Ignore the limit and start seeding anyway?"
-msgstr ""
-"<b>%1</b> 已達最大分享比例已及最大播種時間。要忽略這些限制，並開始播種嗎？"
+msgstr "<b>%1</b> 已達最大分享比例已及最大播種時間。要忽略這些限制，並開始播種嗎？"
 
 #: libktcore/torrent/queuemanager.cpp:120
 #, kde-format
 msgid ""
 "The torrent \"%1\" has reached its maximum share ratio. Ignore the limit and "
 "start seeding anyway?"
 msgstr "<b>%1</b> 已達最大分享比例。要忽略這些限制，並開始播種嗎？"
 
 #: libktcore/torrent/queuemanager.cpp:122
 #, kde-format
 msgid ""
 "The torrent \"%1\" has reached its maximum seed time. Ignore the limit and "
 "start seeding anyway?"
 msgstr "<b>%1</b> 已達最大播種時間。要忽略這些限制，並開始播種嗎？"
 
 #: libktcore/torrent/queuemanager.cpp:126
 #, kde-format
 msgid "Limits reached."
 msgstr "已達到上限。"
 
 #: libktcore/torrent/queuemanager.cpp:152
 #, kde-format
 msgid ""
 "You don't have enough disk space to download this torrent. Are you sure you "
 "want to continue?"
 msgstr "你沒有足夠的硬碟空間進行下載此torrent。是否繼續?"
 
 #: libktcore/torrent/queuemanager.cpp:155
 #, kde-format
 msgid "Insufficient disk space for %1"
 msgstr "%1 上的空間不足夠"
 
 #: libktcore/torrent/queuemanager.cpp:245
 #, kde-format
 msgid ""
 "Not enough disk space for the following torrents. Do you want to start them "
 "anyway?"
 msgstr "你沒有足夠的硬碟空間進行下載以下的 torrent。您是否要繼續？"
 
 #: libktcore/torrent/queuemanager.cpp:284
 #, kde-format
 msgid ""
 "The following torrents have reached their maximum seed time. Do you want to "
 "start them anyway?"
 msgstr "以下的 torrent 已達到它們的最大播種時間。您還是要開始嗎？"
 
 #: libktcore/torrent/queuemanager.cpp:313
 #, kde-format
 msgid ""
 "The following torrents have reached their maximum share ratio. Do you want "
 "to start them anyway?"
 msgstr "以下的 torrent 已達到它們的最大分享比例。您還是要開始嗎？"
 
 #: libktcore/torrent/queuemanager.cpp:741
 #, kde-format
 msgid "Error starting torrent %1: %2"
 msgstr "啟動 torrent %1 時發生錯誤：%2"
 
 #: libktcore/torrent/queuemanager.cpp:743
 #: libktcore/torrent/queuemanager.cpp:759
 #, kde-format
 msgid "Error"
 msgstr "錯誤"
 
 #: libktcore/torrent/queuemanager.cpp:757
 #, kde-format
 msgid "Error stopping torrent %1: %2"
 msgstr "停止 torrent %1 時發生錯誤：%2"
 
 #: libktcore/torrent/torrentfilelistmodel.cpp:81
 #: libktcore/torrent/torrentfiletreemodel.cpp:397
 #, kde-format
 msgid "File"
 msgstr "檔案"
 
 #: libktcore/util/mmapfile.cpp:167
 #, kde-format
 msgid "Cannot write beyond end of the mmap buffer."
 msgstr "無法寫入 mmap 緩衝器之外。"
 
 #. i18n: ectx: property (windowTitle), widget (QWidget, AppletConfig)
 #: plasma/applet/applet.cpp:243 plasma/applet/appletconfig.ui:13
 #, kde-format
 msgid "Applet"
 msgstr "小程式"
 
 #: plasma/applet/applet.cpp:308 plasma/applet/applet.cpp:392
 #, kde-format
 msgid ""
 "<table>\t\t\t\t<tr><td>Download Speed:</td><td>%5 </td><td>Seeders: </td><td>"
 "%1 (%2)</td></tr>\t\t\t\t<tr><td>Upload Speed:</td><td>%6 </td><td>Leechers: "
 "</td><td>%3 (%4)</td></tr>"
 msgstr ""
 "<table>\t\t\t\t<tr><td>下載速率：</td><td>%5</td><td>播種者：</td><td>%1 "
 "(%2)</td></tr>\t\t\t\t <tr><td>上傳速率：</td><td>%6</td><td>要求下載者：</"
 "td><td>%3 （%4）</td></tr>"
 
 #: plasma/applet/applet.cpp:313 plasma/applet/applet.cpp:397
 #, kde-format
 msgid ""
 "<tr><td>Downloaded:</td><td>%1 </td><td>Size: </td><td>%2</td></tr>\t\t\t"
 "\t<tr><td>Uploaded:</td><td>%3 </td><td>Complete: </td><td>%4 %</td></tr>\t\t"
 "\t\t</table>"
 msgstr ""
 "<tr><td>已下載：</td><td>%1 </td><td>大小：</td><td>%2</td></tr>\t\t\t"
 "\t<tr><td>已上傳：</td><td>%3 </td><td>完成：</td><td>%4 %</td></tr>\t\t\t"
 "\t</table>"
 
 #: plasma/applet/applet.cpp:319
 #, kde-format
 msgid "<b>%1</b><br/>%2 (Share Ratio: <font color=\"%4\">%3</font>)"
 msgstr "<b>%1</b><br/>%2（分享比例：<font color=\"%4\">%3</font>）"
 
 #: plasma/applet/applet.cpp:403
 #, kde-format
 msgid "KTorrent is not running."
 msgstr "KTorrent 未執行。"
 
 #: plasma/applet/applet.cpp:405
 #, kde-format
 msgid "No torrents loaded."
 msgstr "沒有載入任何 torrents。"
 
 #: plasma/applet/applet.cpp:407
 #, kde-format
 msgid "Selected torrent is unavailable."
 msgstr "選取的 torrent 無法使用。"
 
 #. i18n: ectx: property (text), widget (QLabel, label)
 #: plasma/applet/appletconfig.ui:21
 #, kde-format
 msgid "Torrent to display:"
 msgstr "要顯示的 Torrent 檔："
 
 #: plugins/bwscheduler/bwprefpage.cpp:27
 #: plugins/bwscheduler/bwschedulerplugin.cpp:78
 #, kde-format
 msgid "Scheduler"
 msgstr "排程器"
 
 #. i18n: ectx: property (title), widget (QGroupBox, groupBox_2)
 #: plugins/bwscheduler/bwprefpage.ui:16
 #, kde-format
 msgid "Special Limits"
 msgstr "特別限制"
 
 #. i18n: ectx: property (toolTip), widget (QCheckBox, kcfg_screensaverLimits)
 #: plugins/bwscheduler/bwprefpage.ui:22
 #, kde-format
 msgid ""
 "Use these global limits when the screensaver is activated, instead of the "
 "ones configured in the network settings."
 msgstr "螢幕保護程式啟動時使用這些全域限制，而不是用網路設定中的設定值。"
 
 #. i18n: ectx: property (text), widget (QCheckBox, kcfg_screensaverLimits)
 #: plugins/bwscheduler/bwprefpage.ui:25
 #, kde-format
 msgid "Use different speed limits when the screensaver is activated"
 msgstr "螢幕保護程式啟動時使用不同的速度限制"
 
 #. i18n: ectx: property (toolTip), widget (QSpinBox, kcfg_screensaverUploadLimit)
 #: plugins/bwscheduler/bwprefpage.ui:49
 #, kde-format
 msgid "Global upload limit when the screensaver is activated."
 msgstr "螢幕保護程式啟動時的全域上傳限制。"
 
 #. i18n: ectx: property (toolTip), widget (QSpinBox, kcfg_screensaverDownloadLimit)
 #: plugins/bwscheduler/bwprefpage.ui:78
 #, kde-format
 msgid "Global download limit when the screensaver is activated."
 msgstr "螢幕保護程式啟動時的全域下載限制。"
 
 #. i18n: ectx: property (title), widget (QGroupBox, ColorsGbw)
 #. i18n: ectx: property (title), widget (QGroupBox, groupBox)
 #: plugins/bwscheduler/bwprefpage.ui:114 plugins/stats/DisplaySettings.ui:17
 #, kde-format
 msgid "Colors"
 msgstr "顏色"
 
 #. i18n: ectx: property (text), widget (QLabel, label_2)
 #: plugins/bwscheduler/bwprefpage.ui:120
 #, kde-format
 msgid "Schedule background color:"
 msgstr "排程背景顏色："
 
 #. i18n: ectx: property (toolTip), widget (KColorButton, kcfg_scheduleBackgroundColor)
 #: plugins/bwscheduler/bwprefpage.ui:127
 #, kde-format
 msgid "Color of the schedule background."
 msgstr "排程背景顏色。"
 
 #. i18n: ectx: property (text), widget (QLabel, label_3)
 #: plugins/bwscheduler/bwprefpage.ui:134
 #, kde-format
 msgid "Schedule line color:"
 msgstr "排程線顏色："
 
 #. i18n: ectx: property (toolTip), widget (KColorButton, kcfg_scheduleLineColor)
 #: plugins/bwscheduler/bwprefpage.ui:141
 #, kde-format
 msgid "Color of all lines on the schedule."
 msgstr "排程內所有線的顏色。"
 
 #. i18n: ectx: property (text), widget (QLabel, label_4)
 #: plugins/bwscheduler/bwprefpage.ui:148
 #, kde-format
 msgid "Schedule Item color:"
 msgstr "排程項目顏色："
 
 #. i18n: ectx: property (toolTip), widget (KColorButton, kcfg_itemColor)
 #: plugins/bwscheduler/bwprefpage.ui:155
 #, kde-format
 msgid "Color of each normal item on the schedule."
 msgstr "排程內每個一般項目的顏色。"
 
 #. i18n: ectx: property (text), widget (QLabel, label_5)
 #: plugins/bwscheduler/bwprefpage.ui:162
 #, kde-format
 msgid "Suspended schedule item color:"
 msgstr "已暫停排程項目顏色："
 
 #. i18n: ectx: property (toolTip), widget (KColorButton, kcfg_suspendedColor)
 #: plugins/bwscheduler/bwprefpage.ui:169
 #, kde-format
 msgid "Color of each suspended item on the schedule."
 msgstr "排程內每個暫停項目的顏色。"
 
 #: plugins/bwscheduler/bwschedulerplugin.cpp:110
 #: plugins/infowidget/infowidgetplugin.cpp:98
 #, kde-format
 msgid "Bandwidth Scheduler"
 msgstr "頻寬排程器"
 
 #. i18n: ectx: property (windowTitle), widget (QDialog, EditItemDlg)
 #: plugins/bwscheduler/edititemdlg.cpp:84 plugins/bwscheduler/edititemdlg.ui:14
 #, kde-format
 msgid "Edit an item"
 msgstr "編輯項目"
 
 #: plugins/bwscheduler/edititemdlg.cpp:84
 #, kde-format
 msgid "Add an item"
 msgstr "新增項目"
 
 #. i18n: ectx: property (title), widget (QGroupBox, groupBox_2)
 #: plugins/bwscheduler/edititemdlg.ui:20
 #, kde-format
 msgid "Duration"
 msgstr "期間"
 
 #. i18n: ectx: property (text), widget (QLabel, label_3)
 #: plugins/bwscheduler/edititemdlg.ui:28
 #, kde-format
 msgid "From:"
 msgstr "從:"
 
 #. i18n: ectx: property (displayFormat), widget (QTimeEdit, m_from)
 #. i18n: ectx: property (displayFormat), widget (QTimeEdit, m_to)
 #: plugins/bwscheduler/edititemdlg.ui:35 plugins/bwscheduler/edititemdlg.ui:49
 #, kde-format
 msgid "hh:mm"
 msgstr "hh:mm"
 
 #. i18n: ectx: property (text), widget (QLabel, label_4)
 #: plugins/bwscheduler/edititemdlg.ui:42
 #, kde-format
 msgid "To:"
 msgstr "到:"
 
 #. i18n: ectx: property (text), widget (QLabel, label_5)
 #: plugins/bwscheduler/edititemdlg.ui:60
 #, kde-format
 msgctxt "starting day"
 msgid "From:"
 msgstr "從："
 
 #. i18n: ectx: property (text), widget (QLabel, label_10)
 #: plugins/bwscheduler/edititemdlg.ui:70
 #, kde-format
 msgctxt "ending day"
 msgid "To:"
 msgstr "到："
 
 #. i18n: ectx: property (title), widget (QGroupBox, groupBox)
 #: plugins/bwscheduler/edititemdlg.ui:100
 #, kde-format
 msgid "Limits"
 msgstr "限制"
 
 #. i18n: ectx: property (text), widget (QLabel, label)
 #. i18n: ectx: property (text), widget (QLabel, label_8)
 #: plugins/bwscheduler/edititemdlg.ui:115
 #: plugins/bwscheduler/edititemdlg.ui:166
 #, kde-format
 msgid "Download limit:"
 msgstr "下載限制："
 
 #. i18n: ectx: property (text), widget (QLabel, label_2)
 #. i18n: ectx: property (text), widget (QLabel, label_9)
 #: plugins/bwscheduler/edititemdlg.ui:135
 #: plugins/bwscheduler/edititemdlg.ui:186
 #, kde-format
 msgid "Upload limit:"
 msgstr "上傳限制："
 
 #. i18n: ectx: property (text), widget (QCheckBox, m_screensaver_limits)
 #: plugins/bwscheduler/edititemdlg.ui:157
 #, kde-format
 msgid "When screensaver is activated:"
 msgstr "螢幕保護程式啟動時："
 
 #. i18n: ectx: property (title), widget (QGroupBox, groupBox_3)
 #: plugins/bwscheduler/edititemdlg.ui:211
 #, kde-format
 msgid "Connection Limits"
 msgstr "連線限制"
 
 #. i18n: ectx: property (text), widget (QCheckBox, m_set_connection_limits)
 #: plugins/bwscheduler/edititemdlg.ui:217
 #, kde-format
 msgid "Set connection limits"
 msgstr "設定連線限制"
 
 #. i18n: ectx: ToolBar (SchedulerToolbar)
 #: plugins/bwscheduler/ktorrent_bwschedulerui.rc:4
 #: plugins/bwscheduler/scheduleeditor.cpp:44
 #, kde-format
 msgid "Bandwidth Schedule"
 msgstr "頻寬排程器"
 
 #: plugins/bwscheduler/schedule.cpp:136 plugins/bwscheduler/schedule.cpp:271
 #, kde-format
 msgid "Cannot open file %1: %2"
 msgstr "無法開啟檔案 %1：%2"
 
 #: plugins/bwscheduler/schedule.cpp:152 plugins/bwscheduler/schedule.cpp:158
 #, kde-format
 msgid "The file %1 is corrupted or not a proper KTorrent schedule file."
 msgstr "檔案 %1 已損壞或不是KTorrent 的 排程檔案。"
 
 #: plugins/bwscheduler/scheduleeditor.cpp:47
 #, kde-format
 msgid "Edit the bandwidth schedule"
 msgstr "編輯頻寬排程"
 
 #: plugins/bwscheduler/scheduleeditor.cpp:89
 #, kde-format
 msgid "Load Schedule"
 msgstr "載入排程"
 
 #: plugins/bwscheduler/scheduleeditor.cpp:90
 #, kde-format
 msgid "Save Schedule"
 msgstr "儲存排程"
 
 #: plugins/bwscheduler/scheduleeditor.cpp:91
 #, kde-format
 msgid "New Item"
 msgstr "新增項目"
 
 #: plugins/bwscheduler/scheduleeditor.cpp:92
 #, kde-format
 msgid "Remove Item"
 msgstr "移除項目"
 
 #: plugins/bwscheduler/scheduleeditor.cpp:93
 #, kde-format
 msgid "Edit Item"
 msgstr "編輯項目"
 
 #: plugins/bwscheduler/scheduleeditor.cpp:94
 #, kde-format
 msgid "Clear Schedule"
 msgstr "清除排程"
 
 #: plugins/bwscheduler/scheduleeditor.cpp:97
 #, kde-format
 msgid "Scheduler Active"
 msgstr "排程器已啟動"
 
 #: plugins/bwscheduler/scheduleeditor.cpp:98
 #, kde-format
 msgid "Activate or deactivate the scheduler"
 msgstr "啟動/不啟動排程器"
 
 #: plugins/bwscheduler/scheduleeditor.cpp:127
 #: plugins/bwscheduler/scheduleeditor.cpp:143
 #, kde-format
 msgid "KTorrent scheduler files"
 msgstr "KTorrent 排程檔案"
 
 #: plugins/bwscheduler/scheduleeditor.cpp:196
 #, kde-format
 msgid ""
 "This item conflicts with another item in the schedule, we cannot change it."
 msgstr "此項目與排程中另一個項目衝突，無法變更。"
 
 #: plugins/bwscheduler/schedulegraphicsitem.cpp:90
 #, kde-format
 msgid "Suspended"
 msgstr "暫停"
 
 #: plugins/bwscheduler/schedulegraphicsitem.cpp:97
 #, kde-format
 msgid ""
 "%1 Down\n"
 "%2 Up"
 msgstr ""
 "%1 下載\n"
 "%2 上傳"
 
 #: plugins/bwscheduler/weekscene.cpp:77
 #, kde-format
 msgid "Current schedule: suspended"
 msgstr "目前的排程：暫停"
 
 #: plugins/bwscheduler/weekscene.cpp:79
 #, kde-format
 msgid "Current schedule: %1/s download, %2/s upload"
 msgstr "目前的排程：下載 %1/秒，上傳 %2/秒"
 
 #: plugins/bwscheduler/weekscene.cpp:82
 #, kde-format
 msgid "Current schedule: unlimited download, %1/s upload"
 msgstr "目前的排程：下載無限制，上傳 %1/秒"
 
 #: plugins/bwscheduler/weekscene.cpp:84
 #, kde-format
 msgid "Current schedule: %1/s download, unlimited upload"
 msgstr "目前的排程：下載 %1/秒，上傳無限制"
 
 #: plugins/bwscheduler/weekscene.cpp:86
 #, kde-format
 msgid "Current schedule: unlimited upload and download"
 msgstr "目前的排程：下載與上傳均無限制"
 
 #: plugins/bwscheduler/weekscene.cpp:89
 #, kde-format
 msgid " (scheduler disabled)"
 msgstr "（排程已關閉）"
 
 #: plugins/bwscheduler/weekscene.cpp:108
 #, kde-format
 msgid "Current schedule:"
 msgstr "目前的排程："
 
 #. i18n: ectx: property (windowTitle), widget (QWidget, DownloadOrderWidget)
 #: plugins/downloadorder/downloadorderdialog.cpp:44
 #: plugins/downloadorder/downloadorderplugin.cpp:47
 #: plugins/downloadorder/downloadorderwidget.ui:14
 #, kde-format
 msgid "File Download Order"
 msgstr "檔案下載順序"
 
 #: plugins/downloadorder/downloadorderdialog.cpp:45
 #, kde-format
 msgid "File download order for <b>%1</b>:"
 msgstr "<b>%1</b> 的檔案下載順序"
 
 #: plugins/downloadorder/downloadorderdialog.cpp:86
 #, kde-format
 msgid "Seasons and Episodes"
 msgstr "季與集"
 
 #: plugins/downloadorder/downloadorderdialog.cpp:87
 #, kde-format
 msgid "Album Track Order"
 msgstr "專輯追蹤順序"
 
 #. i18n: ectx: property (text), widget (QLabel, m_top_label)
 #: plugins/downloadorder/downloadorderwidget.ui:20
 #, kde-format
 msgid "File download order for:"
 msgstr "檔案下載順序於："
 
 #. i18n: ectx: property (toolTip), widget (QCheckBox, m_custom_order_enabled)
 #: plugins/downloadorder/downloadorderwidget.ui:27
 #, kde-format
 msgid "Whether or not to enable a custom download order."
 msgstr "是否要開啟自訂下載順序功能。"
 
 #. i18n: ectx: property (text), widget (QCheckBox, m_custom_order_enabled)
 #: plugins/downloadorder/downloadorderwidget.ui:30
 #, kde-format
 msgid "Custom file download order enabled"
 msgstr "自訂檔案下載順序功能已開啟"
 
 #. i18n: ectx: property (text), widget (QToolButton, m_sort_by)
 #: plugins/downloadorder/downloadorderwidget.ui:42
 #, kde-format
 msgid "Sort By"
 msgstr "排序依據"
 
 #. i18n: ectx: property (placeholderText), widget (QLineEdit, m_search_files)
 #: plugins/downloadorder/downloadorderwidget.ui:52
 #, kde-format
 msgid "Search files"
 msgstr "搜尋檔案"
 
 #. i18n: ectx: property (toolTip), widget (QListView, m_order)
 #: plugins/downloadorder/downloadorderwidget.ui:66
 #, kde-format
 msgid ""
 "Order in which to download the files of a torrent. The file at the top will "
 "be downloaded first, followed by the second, then the third ..."
 msgstr "在 torrent 中的檔案下載順序。在最頂端的檔案會先下載。"
 
 #. i18n: ectx: property (text), widget (QPushButton, m_add_tracker)
 #: plugins/infowidget/addtrackersdialog.cpp:39
 #: plugins/infowidget/trackerview.ui:22
 #, kde-format
 msgid "Add Trackers"
 msgstr "加入追蹤器"
 
 #: plugins/infowidget/availabilitychunkbar.cpp:36
 #, kde-format
 msgid ""
 "<img src=\"available_color\">&nbsp; - Available Chunks<br><img src="
 "\"unavailable_color\">&nbsp; - Unavailable Chunks<br><img src="
 "\"excluded_color\">&nbsp; - Excluded Chunks"
 msgstr ""
 "<img src=\"available_color\">&nbsp;─可用的區塊<br/> <img src="
 "\"unavailable_color\">&nbsp;─不可用的區塊<br/> <img src=\"excluded_color"
 "\">&nbsp;─排除的區塊"
 
 #: plugins/infowidget/chunkdownloadmodel.cpp:201
 #, kde-format
 msgid "Chunk"
 msgstr "區塊"
 
 #: plugins/infowidget/chunkdownloadmodel.cpp:202
 #, kde-format
 msgid "Progress"
 msgstr "進度:"
 
 #: plugins/infowidget/chunkdownloadmodel.cpp:203
 #, kde-format
 msgid "Peer"
 msgstr "端點"
 
 #: plugins/infowidget/chunkdownloadmodel.cpp:205
 #, kde-format
 msgid "Files"
 msgstr "檔案"
 
 #: plugins/infowidget/chunkdownloadmodel.cpp:213
 #, kde-format
 msgid "Number of the chunk"
 msgstr "區塊數量"
 
 #: plugins/infowidget/chunkdownloadmodel.cpp:214
 #, kde-format
 msgid "Download progress of the chunk"
 msgstr "區塊下載進度"
 
 #: plugins/infowidget/chunkdownloadmodel.cpp:215
 #, kde-format
 msgid "Which peer we are downloading it from"
 msgstr "我們正從哪一個端點下載"
 
 #: plugins/infowidget/chunkdownloadmodel.cpp:216
 #, kde-format
 msgid "Download speed of the chunk"
 msgstr "區塊的下載速度"
 
 #: plugins/infowidget/chunkdownloadmodel.cpp:217
 #, kde-format
 msgid "Which files the chunk is located in"
 msgstr "此區塊是位於哪一個檔案"
 
 #. i18n: ectx: property (text), widget (QLabel, hdr_chunks)
 #. i18n: ectx: property (windowTitle), widget (QWidget, ChunkDownloadView)
 #: plugins/infowidget/chunkdownloadview.ui:13
 #: plugins/infowidget/infowidgetplugin.cpp:246
 #: plugins/infowidget/statustab.ui:181
 #, kde-format
 msgid "Chunks"
 msgstr "區塊"
 
 #. i18n: ectx: property (text), widget (QLabel, textLabel1)
 #: plugins/infowidget/chunkdownloadview.ui:26
 #, kde-format
 msgid "Total:"
 msgstr "總計："
 
 #. i18n: ectx: property (text), widget (QLabel, textLabel5)
 #: plugins/infowidget/chunkdownloadview.ui:62
 #, kde-format
 msgid "Currently downloading:"
 msgstr "正在下載:"
 
 #. i18n: ectx: property (text), widget (QLabel, textLabel1_4)
 #: plugins/infowidget/chunkdownloadview.ui:134
 #, kde-format
 msgid "Excluded:"
 msgstr "已排除"
 
 #. i18n: ectx: property (text), widget (QLabel, textLabel1_4_2)
 #: plugins/infowidget/chunkdownloadview.ui:170
 #, kde-format
 msgid "Left:"
 msgstr "剩餘:"
 
 #. i18n: ectx: property (text), widget (QLabel, textLabel1_8)
 #: plugins/infowidget/chunkdownloadview.ui:206
 #, kde-format
 msgid "Size:"
 msgstr "大小:"
 
 #: plugins/infowidget/fileview.cpp:116
 #, kde-format
 msgctxt "Open file"
 msgid "Open"
 msgstr "開啟"
 
 #: plugins/infowidget/fileview.cpp:117
 #, kde-format
 msgctxt "Open file with"
 msgid "Open With"
 msgstr "開啟方式"
 
 #: plugins/infowidget/fileview.cpp:118
 #, kde-format
 msgid "Check File"
 msgstr "檢查檔案"
 
 #: plugins/infowidget/fileview.cpp:120
 #, kde-format
 msgid "Download first"
 msgstr "優先下載"
 
 #: plugins/infowidget/fileview.cpp:121
 #, kde-format
 msgid "Download normally"
 msgstr "正常下載"
 
 #: plugins/infowidget/fileview.cpp:122
 #, kde-format
 msgid "Download last"
 msgstr "最後下載"
 
 #: plugins/infowidget/fileview.cpp:124
 #, kde-format
 msgid "Do not download"
 msgstr "不要下載"
 
 #: plugins/infowidget/fileview.cpp:125
 #, kde-format
 msgid "Delete File(s)"
 msgstr "刪除檔案"
 
 #: plugins/infowidget/fileview.cpp:127
 #, kde-format
 msgid "Move File"
 msgstr "移動檔案"
 
 #: plugins/infowidget/fileview.cpp:129
 #, kde-format
 msgid "Collapse Folder Tree"
 msgstr "折疊資料夾樹"
 
 #: plugins/infowidget/fileview.cpp:130
 #, kde-format
 msgid "Expand Folder Tree"
 msgstr "展開資料夾樹"
 
 #: plugins/infowidget/fileview.cpp:133
 #, kde-format
 msgid "File Tree"
 msgstr "檔案樹狀圖"
 
 #: plugins/infowidget/fileview.cpp:135
 #, kde-format
 msgid "File List"
 msgstr "檔案清單"
 
 #: plugins/infowidget/fileview.cpp:145
 #, kde-format
 msgid "Show Filter"
 msgstr "顯示過濾器"
 
 #: plugins/infowidget/fileview.cpp:338
 #, kde-format
 msgid "You will lose all data in this file, are you sure you want to do this?"
 msgid_plural ""
 "You will lose all data in these files, are you sure you want to do this?"
 msgstr[0] "您會失去這些檔案的所有資料。您確定要這樣做嗎？"
 
 #: plugins/infowidget/fileview.cpp:477
 #, kde-format
 msgid ""
 "Not enough data downloaded for opening the file.\n"
 "\n"
 "Enable sequential download mode for it to obtain necessary data with a "
 "higher priority?"
 msgstr ""
 "已下載的資料不足以開啟檔案。\n"
 "\n"
 "啟用序列下載模式以讓必要的資料以較高的優先程度下載？"
 
 #: plugins/infowidget/infowidgetplugin.cpp:73
 #: plugins/infowidget/iwprefpage.cpp:26
 #, kde-format
 msgid "Info Widget"
 msgstr "資訊元件"
 
 #: plugins/infowidget/infowidgetplugin.cpp:85
 #, kde-format
 msgctxt "@title:tab"
 msgid "Status"
 msgstr "狀態"
 
 #: plugins/infowidget/infowidgetplugin.cpp:86
 #, kde-format
 msgid "Displays status information about a torrent"
 msgstr "顯示 torrent 的狀態資訊"
 
 #: plugins/infowidget/infowidgetplugin.cpp:87
 #, kde-format
 msgctxt "@title:tab"
 msgid "Files"
 msgstr "檔案"
 
 #: plugins/infowidget/infowidgetplugin.cpp:88
 #, kde-format
 msgid "Shows all the files in a torrent"
 msgstr "顯示 torrent 中所有檔案"
 
 #: plugins/infowidget/infowidgetplugin.cpp:225
 #, kde-format
 msgid "Displays all the peers you are connected to for a torrent"
 msgstr "顯示您為此 torrent 連線的所有端點"
 
 #: plugins/infowidget/infowidgetplugin.cpp:247
 #, kde-format
 msgid "Displays all the chunks you are downloading, of a torrent"
 msgstr "顯示您正在下載此 torrent 的所有區塊"
 
 #: plugins/infowidget/infowidgetplugin.cpp:269
 #, kde-format
 msgid "Displays information about all the trackers of a torrent"
 msgstr "顯示此 torrent 所有追蹤器的資訊"
 
 #: plugins/infowidget/infowidgetplugin.cpp:287
 #, kde-format
 msgid "Webseeds"
 msgstr "Webseeds"
 
 #: plugins/infowidget/infowidgetplugin.cpp:288
 #, kde-format
 msgid "Displays all the webseeds of a torrent"
 msgstr "顯示此 torrent 的所有網頁種子"
 
 #: plugins/infowidget/iwfilelistmodel.cpp:80
 #: plugins/infowidget/iwfiletreemodel.cpp:92
 #, kde-format
 msgctxt "@title:column"
 msgid "Preview"
 msgstr "預覽"
 
 #: plugins/infowidget/iwfilelistmodel.cpp:82
 #: plugins/infowidget/iwfiletreemodel.cpp:94
 #, no-c-format, kde-format
 msgctxt "Percent of File Downloaded"
 msgid "% Complete"
 msgstr "% 已完成"
 
 #: plugins/infowidget/iwfilelistmodel.cpp:91
 #: plugins/infowidget/iwfiletreemodel.cpp:103
 #, kde-format
 msgctxt "Download first"
 msgid "First"
 msgstr "優先"
 
 #: plugins/infowidget/iwfilelistmodel.cpp:92
 #: plugins/infowidget/iwfiletreemodel.cpp:104
 #, kde-format
 msgctxt "Download last"
 msgid "Last"
 msgstr "最後"
 
 #: plugins/infowidget/iwfilelistmodel.cpp:97
 #, kde-format
 msgctxt "Download Normal (not as first or last)"
 msgid "Normal"
 msgstr "一般"
 
 #: plugins/infowidget/iwfilelistmodel.cpp:148
 #: plugins/infowidget/iwfilelistmodel.cpp:171
 #: plugins/infowidget/iwfiletreemodel.cpp:184
 #, kde-format
 msgctxt "Preview available"
 msgid "Available"
 msgstr "可用"
 
 #: plugins/infowidget/iwfilelistmodel.cpp:150
 #: plugins/infowidget/iwfilelistmodel.cpp:173
 #: plugins/infowidget/iwfiletreemodel.cpp:163
 #: plugins/infowidget/iwfiletreemodel.cpp:186
 #, kde-format
 msgctxt "Preview pending"
 msgid "Pending"
 msgstr "暫停"
 
 #: plugins/infowidget/iwfilelistmodel.cpp:153
 #: plugins/infowidget/iwfilelistmodel.cpp:176
 #: plugins/infowidget/iwfiletreemodel.cpp:166
 #: plugins/infowidget/iwfiletreemodel.cpp:189
 #, kde-format
 msgctxt "No preview available"
 msgid "No"
 msgstr "無"
 
 #: plugins/infowidget/iwfilelistmodel.cpp:157
 #: plugins/infowidget/iwfilelistmodel.cpp:180
 #: plugins/infowidget/iwfiletreemodel.cpp:171
 #: plugins/infowidget/iwfiletreemodel.cpp:191
 #: plugins/infowidget/iwfiletreemodel.cpp:197
 #, kde-format
 msgid "%1 %"
 msgstr "%1 %"
 
 #: plugins/infowidget/iwfiletreemodel.cpp:109
 #, kde-format
 msgctxt "Download normally(not as first or last)"
 msgid "Normal"
 msgstr "一般"
 
 #: plugins/infowidget/iwfiletreemodel.cpp:161
 #, kde-format
 msgctxt "preview available"
 msgid "Available"
 msgstr "可用"
 
 #. i18n: ectx: property (title), widget (QGroupBox, groupBox)
 #: plugins/infowidget/iwprefpage.ui:17
 #, kde-format
 msgid "Tabs"
 msgstr "分頁"
 
 #. i18n: ectx: property (toolTip), widget (QCheckBox, kcfg_showPeerView)
 #: plugins/infowidget/iwprefpage.ui:23
 #, kde-format
 msgid "Whether or not to show the peers tab in the bottom of the window."
 msgstr "是否要在視窗底部顯示端點的分頁。"
 
 #. i18n: ectx: property (text), widget (QCheckBox, kcfg_showPeerView)
 #: plugins/infowidget/iwprefpage.ui:26
 #, kde-format
 msgid "Show list of peers"
 msgstr "顯示端點列表"
 
 #. i18n: ectx: property (toolTip), widget (QCheckBox, kcfg_showChunkView)
 #: plugins/infowidget/iwprefpage.ui:33
 #, kde-format
 msgid "Whether or not to show the chunks tab in the bottom of the window."
 msgstr "是否要在視窗底部顯示區塊的分頁。"
 
 #. i18n: ectx: property (text), widget (QCheckBox, kcfg_showChunkView)
 #: plugins/infowidget/iwprefpage.ui:36
 #, kde-format
 msgid "Show list of chunks currently downloading"
 msgstr "顯示目前下載的區塊列表"
 
 #. i18n: ectx: property (toolTip), widget (QCheckBox, kcfg_showTrackersView)
 #: plugins/infowidget/iwprefpage.ui:43
 #, kde-format
 msgid "Whether or not to show the trackers tab in the bottom of the window."
 msgstr "是否要在視窗底部顯示追蹤器的分頁。"
 
 #. i18n: ectx: property (text), widget (QCheckBox, kcfg_showTrackersView)
 #: plugins/infowidget/iwprefpage.ui:46
 #, kde-format
 msgid "Show list of trackers"
 msgstr "顯示追蹤器列表"
 
 #. i18n: ectx: property (toolTip), widget (QCheckBox, kcfg_showWebSeedsTab)
 #: plugins/infowidget/iwprefpage.ui:53
 #, kde-format
 msgid "Whether or not to show the webseeds tab at the bottom of the window."
 msgstr "是否要在視窗底部顯示 webseed 的分頁。"
 
 #. i18n: ectx: property (text), widget (QCheckBox, kcfg_showWebSeedsTab)
 #: plugins/infowidget/iwprefpage.ui:56
 #, kde-format
 msgid "Show list of webseeds"
 msgstr "顯示 webseed 列表"
 
 #. i18n: ectx: property (title), widget (QGroupBox, groupBox_2)
 #: plugins/infowidget/iwprefpage.ui:66
 #, kde-format
 msgid "File Priority Colors"
 msgstr "檔案優先權顏色"
 
 #. i18n: ectx: property (text), widget (QLabel, label)
 #: plugins/infowidget/iwprefpage.ui:72
 #, kde-format
 msgid "First priority:"
 msgstr "第一優先權："
 
 #. i18n: ectx: property (toolTip), widget (KColorButton, kcfg_firstColor)
 #: plugins/infowidget/iwprefpage.ui:79
 #, kde-format
 msgid "Color to use for first priority files."
 msgstr "第一優先權檔案的顏色。"
 
 #. i18n: ectx: property (text), widget (QLabel, label_3)
 #: plugins/infowidget/iwprefpage.ui:86
 #, kde-format
 msgid "Last priority:"
 msgstr "最後優先權："
 
 #. i18n: ectx: property (toolTip), widget (KColorButton, kcfg_lastColor)
 #: plugins/infowidget/iwprefpage.ui:93
 #, kde-format
 msgid "Color to use for last priority files."
 msgstr "最後優先權檔案的顏色。"
 
 #. i18n: ectx: label, entry (showPeerView), group (general)
 #: plugins/infowidget/ktinfowidgetplugin.kcfg:10
 #, kde-format
 msgid "Show peer view tab in main window"
 msgstr "在主視窗中顯示端點"
 
 #. i18n: ectx: label, entry (showChunkView), group (general)
 #: plugins/infowidget/ktinfowidgetplugin.kcfg:14
 #, kde-format
 msgid "Show chunk download view tab in main window"
 msgstr "在主視窗中顯示下載的區塊"
 
 #. i18n: ectx: label, entry (showTrackersView), group (general)
 #: plugins/infowidget/ktinfowidgetplugin.kcfg:18
 #, kde-format
 msgid "Show trackers view tab in main window"
 msgstr "在主視窗中顯示追蹤器"
 
 #: plugins/infowidget/peerview.cpp:59
 #, kde-format
 msgid "Kick Peer"
 msgstr "踢掉端點"
 
 #: plugins/infowidget/peerview.cpp:60
 #, kde-format
 msgid "Ban Peer"
 msgstr "阻擋端點"
 
 #: plugins/infowidget/peerviewmodel.cpp:98
 #, kde-format
 msgid " (µTP)"
 msgstr "（µTP）"
 
 #: plugins/infowidget/peerviewmodel.cpp:113
 #, kde-format
 msgctxt "Choked"
 msgid "Yes"
 msgstr "是"
 
 #: plugins/infowidget/peerviewmodel.cpp:113
 #, kde-format
 msgctxt "Not choked"
 msgid "No"
 msgstr "否"
 
 #: plugins/infowidget/peerviewmodel.cpp:114
 #, kde-format
 msgctxt "Snubbed"
 msgid "Yes"
 msgstr "是"
 
 #: plugins/infowidget/peerviewmodel.cpp:114
 #, kde-format
 msgctxt "Not snubbed"
 msgid "No"
 msgstr "否"
 
 #: plugins/infowidget/peerviewmodel.cpp:122
 #, kde-format
 msgctxt "Interested"
 msgid "Yes"
 msgstr "是"
 
 #: plugins/infowidget/peerviewmodel.cpp:122
 #, kde-format
 msgctxt "Not Interested"
 msgid "No"
 msgstr "否"
 
 #: plugins/infowidget/peerviewmodel.cpp:123
 #, kde-format
 msgctxt "Interesting"
 msgid "Yes"
 msgstr "是"
 
 #: plugins/infowidget/peerviewmodel.cpp:123
 #, kde-format
 msgctxt "Not Interesting"
 msgid "No"
 msgstr "否"
 
 #: plugins/infowidget/peerviewmodel.cpp:265
 #, kde-format
 msgid "Address"
 msgstr "位址"
 
 #: plugins/infowidget/peerviewmodel.cpp:266
 #, kde-format
 msgid "Country"
 msgstr "國家"
 
 #: plugins/infowidget/peerviewmodel.cpp:267
 #, kde-format
 msgid "Client"
 msgstr "客戶端"
 
 #: plugins/infowidget/peerviewmodel.cpp:270
 #, kde-format
 msgid "Choked"
 msgstr "停滯"
 
 #: plugins/infowidget/peerviewmodel.cpp:271
 #, kde-format
 msgid "Snubbed"
 msgstr "緩慢"
 
 #: plugins/infowidget/peerviewmodel.cpp:272
 #, kde-format
 msgid "Availability"
 msgstr "可用性"
 
 #: plugins/infowidget/peerviewmodel.cpp:273
 #, kde-format
 msgid "DHT"
 msgstr "DHT"
 
 #: plugins/infowidget/peerviewmodel.cpp:274
 #, kde-format
 msgid "Score"
 msgstr "分數"
 
 #: plugins/infowidget/peerviewmodel.cpp:275
 #, kde-format
 msgid "Upload Slot"
 msgstr "上傳槽"
 
 #: plugins/infowidget/peerviewmodel.cpp:276
 #, kde-format
 msgid "Requests"
 msgstr "要求"
 
 #: plugins/infowidget/peerviewmodel.cpp:279
 #, kde-format
 msgid "Interested"
 msgstr "感興趣"
 
 #: plugins/infowidget/peerviewmodel.cpp:280
 #, kde-format
 msgid "Interesting"
 msgstr "感興趣"
 
 #: plugins/infowidget/peerviewmodel.cpp:288
 #, kde-format
 msgid "IP address of the peer"
 msgstr "端點的 IP 位址"
 
 #: plugins/infowidget/peerviewmodel.cpp:289
 #, kde-format
 msgid "Country the peer is in"
 msgstr "端點所在的國家"
 
 #: plugins/infowidget/peerviewmodel.cpp:290
 #, kde-format
 msgid "Which client the peer is using"
 msgstr "端點使用哪個客戶端程式"
 
 #: plugins/infowidget/peerviewmodel.cpp:291
 #, kde-format
 msgid "Download speed"
 msgstr "下載速度"
 
 #: plugins/infowidget/peerviewmodel.cpp:292
 #, kde-format
 msgid "Upload speed"
 msgstr "上傳速度"
 
 #: plugins/infowidget/peerviewmodel.cpp:293
 #, kde-format
 msgid ""
 "Whether or not the peer has choked us - when we are choked the peer will not "
 "send us any data"
 msgstr "此端點是否「嗆到」我們。若是被嗆到，此端點將無法傳送任何資料給我們"
 
 #: plugins/infowidget/peerviewmodel.cpp:294
 #, kde-format
 msgid "Snubbed means the peer has not sent us any data in the last 2 minutes"
 msgstr "此端點是否「遺忘」了我們，意思是過去兩分鐘內沒有傳送任何資料過來"
 
 #: plugins/infowidget/peerviewmodel.cpp:295
 #, kde-format
 msgid "How much data the peer has of the torrent"
 msgstr "此端點有多少此 torrent 的資料"
 
 #: plugins/infowidget/peerviewmodel.cpp:296
 #, kde-format
 msgid "Whether or not the peer has DHT enabled"
 msgstr "此端點是否有開啟 DHT"
 
 #: plugins/infowidget/peerviewmodel.cpp:297
 #, kde-format
 msgid "The score of the peer, KTorrent uses this to determine who to upload to"
 msgstr "此端點的分數。KTorrent 會用此分數來決定要上傳給誰。"
 
 #: plugins/infowidget/peerviewmodel.cpp:298
 #, kde-format
 msgid "Only peers which have an upload slot will get data from us"
 msgstr "只有擁有上傳槽的端點才能得到我們傳送的資料"
 
 #: plugins/infowidget/peerviewmodel.cpp:299
 #, kde-format
 msgid "The number of download and upload requests"
 msgstr "下載與上傳要求的數量"
 
 #: plugins/infowidget/peerviewmodel.cpp:300
 #, kde-format
 msgid "How much data we have downloaded from this peer"
 msgstr "我們從此端點下載了多少資料"
 
 #: plugins/infowidget/peerviewmodel.cpp:301
 #, kde-format
 msgid "How much data we have uploaded to this peer"
 msgstr "我們對此端點上傳了多少資料"
 
 #: plugins/infowidget/peerviewmodel.cpp:302
 #, kde-format
 msgid "Whether the peer is interested in downloading data from us"
 msgstr "此端點是否有興趣從我們這裡得到資料"
 
 #: plugins/infowidget/peerviewmodel.cpp:303
 #, kde-format
 msgid "Whether we are interested in downloading from this peer"
 msgstr "我們是否有興趣從此端點得到資料"
 
 #: plugins/infowidget/statustab.cpp:111
 #, kde-format
 msgid "Private"
 msgstr "私人"
 
 #: plugins/infowidget/statustab.cpp:111
 #, kde-format
 msgid "Public"
 msgstr "公開"
 
 #. i18n: ectx: property (text), widget (QLabel, hdr_info)
 #: plugins/infowidget/statustab.ui:32
 #, kde-format
 msgid "Info"
 msgstr "資訊"
 
 #. i18n: ectx: property (text), widget (QLabel, label_14)
 #: plugins/infowidget/statustab.ui:41
 #, kde-format
 msgid "Average down speed:"
 msgstr "平均下載速度:"
 
 #. i18n: ectx: property (text), widget (QLabel, label_16)
 #: plugins/infowidget/statustab.ui:64
 #, kde-format
 msgid "Type:"
 msgstr "型態："
 
 #. i18n: ectx: property (text), widget (QLabel, label_15)
 #: plugins/infowidget/statustab.ui:100
 #, kde-format
 msgid "Average up speed:"
 msgstr "平均上傳速度："
 
 #. i18n: ectx: property (text), widget (QLabel, label)
 #: plugins/infowidget/statustab.ui:123
 #, kde-format
 msgid "Info hash:"
 msgstr "資訊雜湊："
 
 #. i18n: ectx: property (text), widget (QLabel, label_4)
 #: plugins/infowidget/statustab.ui:188
 #, kde-format
 msgid "Downloaded chunks:"
 msgstr "已下載區塊:"
 
 #. i18n: ectx: property (text), widget (QLabel, label_5)
 #: plugins/infowidget/statustab.ui:211
 #, kde-format
 msgid "Available chunks:"
 msgstr "可用區塊:"
 
 #. i18n: ectx: property (text), widget (QLabel, hdr_sharing)
 #: plugins/infowidget/statustab.ui:273
 #, kde-format
 msgctxt "Noun, as in \"file sharing\""
 msgid "Sharing"
 msgstr "分享"
 
 #. i18n: ectx: property (text), widget (QLabel, label_6)
 #: plugins/infowidget/statustab.ui:282
 #, kde-format
 msgid "Share ratio:"
 msgstr "分享比例:"
 
 #. i18n: ectx: property (text), widget (QCheckBox, use_ratio_limit)
 #: plugins/infowidget/statustab.ui:299
 #, kde-format
 msgid "Ratio limit:"
 msgstr "比例限制："
 
 #. i18n: ectx: property (text), widget (QCheckBox, use_time_limit)
 #: plugins/infowidget/statustab.ui:325
 #, kde-format
 msgid "Time limit:"
 msgstr "時間限制："
 
 #: plugins/infowidget/trackermodel.cpp:149
 #: plugins/infowidget/webseedsmodel.cpp:128
 #, kde-format
 msgid "URL"
 msgstr "URL"
 
 #: plugins/infowidget/trackermodel.cpp:153
 #, kde-format
 msgid "Times Downloaded"
 msgstr "下載已用時間"
 
 #: plugins/infowidget/trackermodel.cpp:154
 #, kde-format
 msgid "Next Update"
 msgstr "下次更新"
 
 #: plugins/infowidget/trackerview.cpp:117
 #, kde-format
 msgid "Several URL's could not be added because they are malformed:"
 msgstr "有些網址不正確，因此無法加入："
 
 #: plugins/infowidget/trackerview.cpp:132
 #, kde-format
 msgid "There already is a tracker named <b>%1</b>."
 msgstr "已經有名為 <b>%1</b> 的追蹤器了。"
 
 #: plugins/infowidget/trackerview.cpp:134
 #, kde-format
 msgid "The following duplicate trackers were not added:"
 msgstr "以下的重複追蹤器未被新增："
 
 #. i18n: ectx: property (text), widget (QPushButton, m_remove_tracker)
 #: plugins/infowidget/trackerview.ui:29
 #, kde-format
 msgid "Remove Tracker"
 msgstr "移除追蹤器"
 
 #. i18n: ectx: property (toolTip), widget (QPushButton, m_change_tracker)
 #: plugins/infowidget/trackerview.ui:36
 #, kde-format
 msgid "Changes the current active tracker for private torrents."
 msgstr "變更目前作用中的私密 torrent 的追蹤器。"
 
 #. i18n: ectx: property (text), widget (QPushButton, m_change_tracker)
 #: plugins/infowidget/trackerview.ui:39
 #, kde-format
 msgid "Switch Tracker"
 msgstr "切換追蹤器"
 
 #. i18n: ectx: property (text), widget (QPushButton, m_scrape)
 #: plugins/infowidget/trackerview.ui:46
 #, kde-format
 msgid "Update Trackers"
 msgstr "更新追蹤器"
 
 #. i18n: ectx: property (text), widget (QPushButton, m_restore_defaults)
 #: plugins/infowidget/trackerview.ui:66
 #, kde-format
 msgid "Restore Defaults"
 msgstr "還原預設值"
 
 #: plugins/infowidget/webseedsmodel.cpp:129
 #, kde-format
 msgid "Speed"
 msgstr "速度"
 
 #: plugins/infowidget/webseedstab.cpp:100
 #, kde-format
 msgid "Cannot add the webseed %1, it is already part of the list of webseeds."
 msgstr "無法新增 webseed %1。它已經是 webseed 清單中的一部份了。"
 
 #: plugins/infowidget/webseedstab.cpp:118
 #, kde-format
 msgid "Cannot remove webseed %1, it is part of the torrent."
 msgstr "無法移除 webseed %1，它是 torrent 的一部份。"
 
 #. i18n: ectx: property (toolTip), widget (QLineEdit, m_webseed)
 #: plugins/infowidget/webseedstab.ui:19
 #, kde-format
 msgid ""
 "<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-"
 "right:0px; -qt-block-indent:0; text-indent:0px;\">Webseed to add to the "
 "torrent.</p>\n"
 "<p style=\"-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; "
 "margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"></"
 "p>\n"
 "<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-"
 "right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-"
 "weight:600;\">Note: </span>Only http webseeds are supported.</p>"
 msgstr ""
 "<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-"
 "right:0px; -qt-block-indent:0; text-indent:0px;\">要新增到 torrent 的 "
 "Webseed。</p>\n"
 "<p style=\"-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; "
 "margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"></"
 "p>\n"
 "<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-"
 "right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-"
 "weight:600;\">注意：</span>只支援 http 的 webseeds。</p>"
 
 #. i18n: ectx: property (text), widget (QPushButton, m_add)
 #: plugins/infowidget/webseedstab.ui:26
 #, kde-format
 msgid "Add Webseed"
 msgstr "新增 Webseed"
 
 #. i18n: ectx: property (text), widget (QPushButton, m_remove)
 #: plugins/infowidget/webseedstab.ui:48
 #, kde-format
 msgid "Remove Webseed"
 msgstr "移除 Webseed"
 
 #. i18n: ectx: property (text), widget (QPushButton, m_enable_all)
 #: plugins/infowidget/webseedstab.ui:68
 #, kde-format
 msgid "Enable All"
 msgstr "全部開啟"
 
 #. i18n: ectx: property (text), widget (QPushButton, m_disable_all)
 #: plugins/infowidget/webseedstab.ui:75
 #, kde-format
 msgid "Disable All"
 msgstr "全部關閉"
 
 #. i18n: ectx: property (windowTitle), widget (QDialog, ConvertDialog)
 #: plugins/ipfilter/convertdialog.ui:19 plugins/ipfilter/convertthread.cpp:173
 #, kde-format
 msgid "Converting..."
 msgstr "轉換中..."
 
 #. i18n: ectx: property (text), widget (QLabel, textLabel1)
 #: plugins/ipfilter/convertdialog.ui:28
 #, kde-format
 msgid "Converting block list to KTorrent format. This might take some time."
 msgstr "正在將黑名單轉換為KTorrent 格式. 請稍等"
 
 #. i18n: ectx: property (text), widget (QPushButton, m_cancel)
 #: plugins/ipfilter/convertdialog.ui:95
 #, kde-format
 msgid "C&ancel"
 msgstr "取消 (&a)"
 
 #: plugins/ipfilter/convertthread.cpp:75
 #, kde-format
 msgid "Loading txt file..."
 msgstr "載入純文字檔案中"
 
 #: plugins/ipfilter/convertthread.cpp:155
 #, kde-format
 msgid "There are no IP addresses to convert in %1"
 msgstr "在 %1 中沒有 IP 位址可轉換"
 
 #: plugins/ipfilter/downloadandconvertjob.cpp:86
 #: plugins/ipfilter/downloadandconvertjob.cpp:125
 #: plugins/ipfilter/downloadandconvertjob.cpp:192
 #: plugins/ipfilter/downloadandconvertjob.cpp:268
 #, kde-format
 msgid "Automatic update of IP filter failed: %1"
 msgstr "自動更新 IP 過濾器失敗：%1"
 
 #: plugins/ipfilter/downloadandconvertjob.cpp:147
 #, kde-format
 msgid "7z files are not supported"
 msgstr "不支援 7z 檔"
 
 #: plugins/ipfilter/downloadandconvertjob.cpp:169
 #, kde-format
 msgid "Cannot determine file type of <b>%1</b>"
 msgstr "無法決定 <b>%1</b> 的檔案型態"
 
 #: plugins/ipfilter/downloadandconvertjob.cpp:207
 #, kde-format
 msgid "Cannot open zip file %1."
 msgstr "無法開啟 zip 檔案 %1。"
 
 #: plugins/ipfilter/downloadandconvertjob.cpp:211
 #, kde-format
 msgid "Automatic update of IP filter failed: cannot open zip file %1"
 msgstr "自動更新 IP 過濾器失敗：無法開啟 zip 檔 %1"
 
 #: plugins/ipfilter/downloadandconvertjob.cpp:235
 #, kde-format
 msgid "Cannot find blocklist in zip file %1."
 msgstr "在 zip 檔 %1 中找不到區塊清單。"
 
 #: plugins/ipfilter/downloadandconvertjob.cpp:239
 #, kde-format
 msgid ""
 "Automatic update of IP filter failed: cannot find blocklist in zip file %1"
 msgstr "自動更新 IP 過濾器失敗：在 zip 檔 %1 中找不到阻擋清單"
 
 #: plugins/ipfilter/ipblockingprefpage.cpp:44
 #, kde-format
 msgid " day"
 msgid_plural " days"
 msgstr[0] " 天"
 
 #: plugins/ipfilter/ipblockingprefpage.cpp:69
 #: plugins/ipfilter/ipblockingprefpage.cpp:91
 #: plugins/ipfilter/ipblockingprefpage.cpp:157
 #, kde-format
 msgid "Status: Loaded and running."
 msgstr "狀態:已載入並使用中"
 
 #: plugins/ipfilter/ipblockingprefpage.cpp:71
 #: plugins/ipfilter/ipblockingprefpage.cpp:93
 #: plugins/ipfilter/ipblockingprefpage.cpp:104
 #: plugins/ipfilter/ipblockingprefpage.cpp:159
 #, kde-format
 msgid "Status: Not loaded."
 msgstr "狀態:未載入"
 
 #: plugins/ipfilter/ipblockingprefpage.cpp:122
 #, kde-format
 msgid "Status: Downloading and converting new block list..."
 msgstr "狀態:下載並轉換中..."
 
 #: plugins/ipfilter/ipblockingprefpage.cpp:202
 #, kde-format
 msgid "No update done yet."
 msgstr "尚未更新。"
 
 #: plugins/ipfilter/ipblockingprefpage.cpp:206
 #, kde-format
 msgid "%1 (Last update attempt failed.)"
 msgstr "%1（上次更新失敗。）"
 
 #: plugins/ipfilter/ipblockingprefpage.cpp:220
 #, kde-format
 msgid "Never"
 msgstr "從不"
 
 #. i18n: ectx: property (windowTitle), widget (QWidget, IPBlockingPrefPage)
 #: plugins/ipfilter/ipblockingprefpage.ui:14
 #, kde-format
 msgid "IPBlocking Preferences"
 msgstr "IPBlocking 選項"
 
 #. i18n: ectx: property (title), widget (QGroupBox, groupBox1)
 #: plugins/ipfilter/ipblockingprefpage.ui:23
 #, kde-format
 msgid "PeerGuardian Filter File "
 msgstr "PeerGuardian 過濾器檔案"
 
 #. i18n: ectx: property (toolTip), widget (QCheckBox, kcfg_useLevel1)
 #: plugins/ipfilter/ipblockingprefpage.ui:29
 #, kde-format
 msgid "Enable this if you want the IP filter plugin to work."
 msgstr "若您要使用 IP 過濾器外掛程式，請開啟此選項。"
 
 #. i18n: ectx: property (text), widget (QCheckBox, kcfg_useLevel1)
 #: plugins/ipfilter/ipblockingprefpage.ui:32
 #, kde-format
 msgid "Use PeerGuardian filter"
 msgstr "使用 PeerGuardian 過濾器"
 
 #. i18n: ectx: property (text), widget (QLabel, textLabel1_3)
 #: plugins/ipfilter/ipblockingprefpage.ui:44
 #, kde-format
 msgid "IP filter file:"
 msgstr "IP 黑名單:"
 
 #. i18n: ectx: property (toolTip), widget (KUrlRequester, kcfg_filterURL)
 #: plugins/ipfilter/ipblockingprefpage.ui:54
 #, kde-format
 msgid "Filter file to use, this can be a local file or a remote file."
 msgstr "要使用的過濾器檔案，可以是本地端或遠端的檔案。"
 
 #. i18n: ectx: property (toolTip), widget (QPushButton, m_download)
 #: plugins/ipfilter/ipblockingprefpage.ui:81
 #, kde-format
 msgid "Download and convert the IP filter file."
 msgstr "下載並轉換 IP 過濾器檔案。"
 
 #. i18n: ectx: property (text), widget (QPushButton, m_download)
 #: plugins/ipfilter/ipblockingprefpage.ui:84
 #, kde-format
 msgid "Dow&nload/Convert"
 msgstr "下載/轉換(&N)"
 
 #. i18n: ectx: property (text), widget (QLabel, textLabel1_2)
 #: plugins/ipfilter/ipblockingprefpage.ui:94
 #, kde-format
 msgid ""
 "Download PeerGuardian filter from bluetack.co.uk or iblocklist.org.\n"
 "NOTE: archive files like zip and tar.gz or tar.bz2 are supported."
 msgstr ""
 "從 bluetack.co.uk 或 iblocklist.org 下載 PeerGuardian 過濾器。\n"
 "注意: 支援歸檔如 zip，tar.gz 或 tar.bz2 檔。"
 
 #. i18n: ectx: property (title), widget (QGroupBox, m_auto_update_group_box)
 #: plugins/ipfilter/ipblockingprefpage.ui:117
 #, kde-format
 msgid "Automatic Update"
 msgstr "自動更新"
 
 #. i18n: ectx: property (toolTip), widget (QCheckBox, kcfg_autoUpdate)
 #: plugins/ipfilter/ipblockingprefpage.ui:125
 #, kde-format
 msgid "Enable this if you want to automatically update the filter file."
 msgstr "若您要自動更新過濾器檔案，則開啟此選項。"
 
 #. i18n: ectx: property (text), widget (QCheckBox, kcfg_autoUpdate)
 #: plugins/ipfilter/ipblockingprefpage.ui:128
 #, kde-format
 msgid "Update file every:"
 msgstr "更新檔案間隔："
 
 #. i18n: ectx: property (toolTip), widget (KPluralHandlingSpinBox, kcfg_autoUpdateInterval)
 #: plugins/ipfilter/ipblockingprefpage.ui:147
 #, kde-format
 msgid "Update interval in days."
 msgstr "更新間隔，以天為單位。"
 
 #. i18n: ectx: property (text), widget (QLabel, label)
 #: plugins/ipfilter/ipblockingprefpage.ui:167
 #, kde-format
 msgid "Last updated:"
 msgstr "上次更新："
 
 #. i18n: ectx: property (text), widget (QLabel, label_2)
 #: plugins/ipfilter/ipblockingprefpage.ui:187
 #, kde-format
 msgid "Next update:"
 msgstr "下次更新："
 
 #. i18n: ectx: label, entry (filterURL), group (general)
 #: plugins/ipfilter/ktipfilterplugin.kcfg:10
 #, kde-format
 msgid "Level1 filter url"
 msgstr "等級 1 過濾器網址"
 
 #. i18n: ectx: label, entry (useLevel1), group (general)
 #: plugins/ipfilter/ktipfilterplugin.kcfg:14
 #, kde-format
 msgid "Use level1 filter?"
 msgstr "要使用等級 1 過濾器嗎？"
 
 #. i18n: ectx: label, entry (useRichText), group (general)
 #: plugins/logviewer/ktlogviewerplugin.kcfg:11
 #, kde-format
 msgid "Use rich log text"
 msgstr "使用 rich text 顯示紀錄 "
 
 #: plugins/logviewer/logflags.cpp:123
 #, kde-format
 msgid "System"
 msgstr "系統"
 
 #: plugins/logviewer/logflags.cpp:124
 #, kde-format
 msgid "Log Level"
 msgstr "紀錄等級"
 
 #: plugins/logviewer/logflags.cpp:207 plugins/logviewer/logflagsdelegate.cpp:48
 #, kde-format
 msgid "Debug"
 msgstr "除錯"
 
 #: plugins/logviewer/logflags.cpp:208 plugins/logviewer/logflagsdelegate.cpp:47
 #, kde-format
 msgid "Notice"
 msgstr "注意"
 
 #: plugins/logviewer/logflags.cpp:209 plugins/logviewer/logflagsdelegate.cpp:46
 #, kde-format
 msgid "Important"
 msgstr "重要"
 
 #: plugins/logviewer/logflags.cpp:210 plugins/logviewer/logflagsdelegate.cpp:45
 #, kde-format
 msgid "All"
 msgstr "全部"
 
 #: plugins/logviewer/logflags.cpp:211 plugins/logviewer/logflagsdelegate.cpp:49
 #: plugins/syndication/ktfeed.cpp:508
 #, kde-format
 msgid "None"
 msgstr "無"
 
 #: plugins/logviewer/logprefpage.cpp:32
 #, kde-format
 msgid "Log Viewer"
 msgstr "日誌檢示器"
 
 #. i18n: ectx: property (toolTip), widget (QTreeView, m_logging_flags)
 #: plugins/logviewer/logprefwidget.ui:23
 #, kde-format
 msgid ""
 "Double click on the log level to alter it. The possible levels are :\n"
 "<p style=\"-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; "
 "margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"></"
 "p>\n"
 "<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-"
 "right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-"
 "weight:600;\">All: </span>All messages are shown</p>\n"
 "<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-"
 "right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-"
 "weight:600;\">Important: </span>Only important messages are shown</p>\n"
 "<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-"
 "right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-"
 "weight:600;\">Notice: </span>Only notice and important messages are shown</"
 "p>\n"
 "<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-"
 "right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-"
 "weight:600;\">Debug: </span>Debug, notice and important messages are shown</"
 "p>\n"
 "<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-"
 "right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-"
 "weight:600;\">None:</span> No messages are shown</p>"
 msgstr ""
 "在紀錄等擊上雙擊可以改變它們。可用的等級包括：\n"
 "<p style=\"-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; "
 "margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"></"
 "p>\n"
 "<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-"
 "right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-"
 "weight:600;\">全部：</span>顯示所有的訊息</p>\n"
 "<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-"
 "right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-"
 "weight:600;\">重要：</span>只顯示重要的訊息</p>\n"
 "<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-"
 "right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-"
 "weight:600;\">注意：</span>只顯示注意與重要的訊息</p>\n"
 "<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-"
 "right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-"
 "weight:600;\">除錯：</span>顯示除錯、注意與重要的訊息</p>\n"
 "<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-"
 "right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-"
 "weight:600;\">無：</span>不顯示訊息</p>"
 
 #. i18n: ectx: property (toolTip), widget (QCheckBox, kcfg_useRichText)
 #: plugins/logviewer/logprefwidget.ui:42
 #, kde-format
 msgid ""
 "Whether or not to use rich text or just plain text, for the logging output "
 "shown in the logviewer."
 msgstr "使用rich text / 純文字顯示日誌"
 
 #. i18n: ectx: property (text), widget (QCheckBox, kcfg_useRichText)
 #: plugins/logviewer/logprefwidget.ui:45
 #, kde-format
 msgid "Use rich text for logging output"
 msgstr "使用rich text 顯示記錄 "
 
 #. i18n: ectx: property (text), widget (QLabel, label)
 #: plugins/logviewer/logprefwidget.ui:54
 #, kde-format
 msgid "Log widget position:"
 msgstr "紀錄元件位置："
 
 #. i18n: ectx: property (text), item, widget (QComboBox, kcfg_logWidgetPosition)
 #: plugins/logviewer/logprefwidget.ui:68
 #, kde-format
 msgid "Separate activity"
 msgstr "分離活動"
 
 #. i18n: ectx: property (text), item, widget (QComboBox, kcfg_logWidgetPosition)
 #: plugins/logviewer/logprefwidget.ui:73
 #, kde-format
 msgid "Dockable widget"
 msgstr "可嵌入元件"
 
 #. i18n: ectx: property (text), item, widget (QComboBox, kcfg_logWidgetPosition)
 #: plugins/logviewer/logprefwidget.ui:78
 #, kde-format
 msgid "Torrent activity"
 msgstr "Torrent 活動"
 
 #. i18n: ectx: property (text), widget (QLabel, label_2)
 #: plugins/logviewer/logprefwidget.ui:103
 #, kde-format
 msgid "Maximum number of visible lines:"
 msgstr "可見行最大數量："
 
 #: plugins/logviewer/logviewer.cpp:38
 #, kde-format
 msgid "Log"
 msgstr "紀錄"
 
 #: plugins/logviewer/logviewer.cpp:40
 #, kde-format
 msgid "View the logging output generated by KTorrent"
 msgstr "檢視 KTorrent 產生的紀錄輸出"
 
 #: plugins/logviewer/logviewer.cpp:50
 #, kde-format
 msgid "Suspend Output"
 msgstr "暫停輸出"
 
 #: plugins/logviewer/logviewer.cpp:141
 #, kde-format
 msgid "<font color=\"#FF0000\">Logging output suspended</font>"
 msgstr "<font color=\"#FF0000\">紀錄輸出已暫停</font>"
 
 #: plugins/logviewer/logviewer.cpp:143
 #, kde-format
 msgid "<font color=\"#00FF00\">Logging output resumed</font>"
 msgstr "<font color=\"#FF0000\">紀錄輸出已回復</font>"
 
 #. i18n: ectx: label, entry (torrenttracker), group (general)
 #. i18n: ectx: property (toolTip), widget (QCheckBox, kcfg_torrenttracker)
 #: plugins/magnetgenerator/ktmagnetgeneratorplugin.kcfg:10
 #: plugins/magnetgenerator/magnetgeneratorprefwidget.ui:40
 #, kde-format
 msgid "Grabs a tracker from the torrent file"
 msgstr "從 torrent 檔中取得追蹤器"
 
 #. i18n: ectx: label, entry (customtracker), group (general)
 #: plugins/magnetgenerator/ktmagnetgeneratorplugin.kcfg:14
 #, kde-format
 msgid "Toggles if a custom tracker is used"
 msgstr "切換是否使用自訂的追蹤器"
 
 #. i18n: ectx: label, entry (tr), group (general)
 #: plugins/magnetgenerator/ktmagnetgeneratorplugin.kcfg:18
 #, kde-format
 msgid "The default tracker"
 msgstr "預設的追蹤器"
 
 #. i18n: ectx: label, entry (dn), group (general)
 #: plugins/magnetgenerator/ktmagnetgeneratorplugin.kcfg:22
 #, kde-format
 msgid "Show dn"
 msgstr "顯示 dn"
 
 #. i18n: ectx: label, entry (popup), group (general)
 #. i18n: ectx: property (text), widget (QCheckBox, kcfg_popup)
 #: plugins/magnetgenerator/ktmagnetgeneratorplugin.kcfg:26
 #: plugins/magnetgenerator/magnetgeneratorprefwidget.ui:90
 #, kde-format
 msgid "Show popup"
 msgstr "顯示彈出式視窗"
 
 #. i18n: ectx: label, entry (onlypublic), group (general)
 #. i18n: ectx: property (toolTip), widget (QCheckBox, kcfg_onlypublic)
 #: plugins/magnetgenerator/ktmagnetgeneratorplugin.kcfg:30
 #: plugins/magnetgenerator/magnetgeneratorprefwidget.ui:77
 #, kde-format
 msgid "Only enable on public torrents"
 msgstr "只於公開的 torrent 中開啟"
 
 #: plugins/magnetgenerator/magnetgeneratorplugin.cpp:52
 #, kde-format
 msgid "Copy Magnet URI"
 msgstr "複製 Magnet 網址"
 
 #: plugins/magnetgenerator/magnetgeneratorplugin.cpp:140
 #, kde-format
 msgid "Magnet"
 msgstr "Magnet"
 
 #: plugins/magnetgenerator/magnetgeneratorplugin.cpp:140
 #, kde-format
 msgid "Magnet link copied to clipboard"
 msgstr "Magnet 連結已複製到剪貼簿"
 
 #. i18n: ectx: property (title), widget (QGroupBox, groupBox_x2)
 #: plugins/magnetgenerator/magnetgeneratorprefwidget.cpp:33
 #: plugins/magnetgenerator/magnetgeneratorprefwidget.ui:32
 #, kde-format
 msgid "Magnet Generator"
 msgstr "Magnet 產生器"
 
 #. i18n: ectx: property (windowTitle), widget (QWidget, MagnetGeneratorPrefWidget)
 #: plugins/magnetgenerator/magnetgeneratorprefwidget.ui:26
 #, kde-format
 msgid "Magnet Generator Preferences"
 msgstr "Magnet 產生器喜好設定"
 
 #. i18n: ectx: property (text), widget (QCheckBox, kcfg_torrenttracker)
 #: plugins/magnetgenerator/magnetgeneratorprefwidget.ui:43
 #, kde-format
 msgid "Add a tracker from the torrent file"
 msgstr "加入從 torrent 檔中取得的追蹤器"
 
 #. i18n: ectx: property (toolTip), widget (QCheckBox, kcfg_customtracker)
 #: plugins/magnetgenerator/magnetgeneratorprefwidget.ui:50
 #, kde-format
 msgid "Define what tracker to add"
 msgstr "定義要加入哪個追蹤器"
 
 #. i18n: ectx: property (text), widget (QCheckBox, kcfg_customtracker)
 #: plugins/magnetgenerator/magnetgeneratorprefwidget.ui:53
 #, kde-format
 msgid "Add a custom tracker URL"
 msgstr "新增自訂的追蹤器網址"
 
 #. i18n: ectx: property (toolTip), widget (QLineEdit, kcfg_tr)
 #: plugins/magnetgenerator/magnetgeneratorprefwidget.ui:60
 #, kde-format
 msgid "The tracker URL that will be a part of the magnet link"
 msgstr "要成為 magnet 連結一部份的追蹤器網址"
 
 #. i18n: ectx: property (toolTip), widget (QCheckBox, kcfg_dn)
 #: plugins/magnetgenerator/magnetgeneratorprefwidget.ui:67
 #, kde-format
 msgid "Add the torrent name in the URI"
 msgstr "在網址中加入追蹤器名稱"
 
 #. i18n: ectx: property (text), widget (QCheckBox, kcfg_dn)
 #: plugins/magnetgenerator/magnetgeneratorprefwidget.ui:70
 #, kde-format
 msgid "Add name"
 msgstr "新增名稱"
 
 #. i18n: ectx: property (text), widget (QCheckBox, kcfg_onlypublic)
 #: plugins/magnetgenerator/magnetgeneratorprefwidget.ui:80
 #, kde-format
 msgid "Disable the menu item for private torrents"
 msgstr "關閉私密 torrent 的選單項目"
 
 #. i18n: ectx: property (toolTip), widget (QCheckBox, kcfg_popup)
 #: plugins/magnetgenerator/magnetgeneratorprefwidget.ui:87
 #, kde-format
 msgid "Give feedback in form of a popup"
 msgstr "以彈出式視窗給回饋"
 
 #. i18n: ectx: Menu (MediaPlayerMenu)
 #: plugins/mediaplayer/ktorrent_mediaplayerui.rc:3
 #, kde-format
 msgid "Media Player Menu"
 msgstr "媒體播放器選單"
 
 #: plugins/mediaplayer/mediacontroller.cpp:43
 #: plugins/mediaplayer/mediacontroller.cpp:87
 #, kde-format
 msgid "Ready to play"
 msgstr "準備播放"
 
 #: plugins/mediaplayer/mediacontroller.cpp:99
 #: plugins/mediaplayer/mediacontroller.cpp:106
 #, kde-format
 msgid "Playing: <b>%1</b>"
 msgstr "正播放：<b>%1</b>"
 
 #: plugins/mediaplayer/mediacontroller.cpp:120
 #, kde-format
 msgid "<b>%2</b> - <b>%1</b> (Album: <b>%3</b>)"
 msgstr "<b>%2</b> - <b>%1</b>（專輯：<b>%3</b>）"
 
 #: plugins/mediaplayer/mediacontroller.cpp:125
 #, kde-format
 msgid "<b>%2</b> - <b>%1</b>"
 msgstr "<b>%2</b> - <b>%1</b>"
 
 #: plugins/mediaplayer/mediacontroller.cpp:130
 #: plugins/mediaplayer/mediacontroller.cpp:135
 #, kde-format
 msgid "<b>%1</b>"
 msgstr "<b>%1</b>"
 
 #: plugins/mediaplayer/mediamodel.cpp:92
 #, kde-format
 msgid "Available"
 msgstr "可用"
 
 #: plugins/mediaplayer/mediamodel.cpp:92
 #, kde-format
 msgid "Pending"
 msgstr "暫停"
 
 #: plugins/mediaplayer/mediamodel.cpp:93
 #, kde-format
 msgid "<b>%1</b><br/>Preview: %2<br/>Downloaded: %3 %"
 msgstr "<b>%1</b><br /> 預覽：%2<br /> 已下載：%3 %"
 
 #: plugins/mediaplayer/mediaplayeractivity.cpp:55
 #: plugins/mediaplayer/mediaplayeractivity.cpp:72
 #: plugins/mediaplayer/mediaplayeractivity.cpp:165
 #: plugins/mediaplayer/mediaplayeractivity.cpp:368
 #: plugins/mediaplayer/mediaplayerplugin.cpp:52
 #: plugins/mediaplayer/mediaplayerplugin.cpp:63
 #, kde-format
 msgid "Media Player"
 msgstr "媒體播放器"
 
 #: plugins/mediaplayer/mediaplayeractivity.cpp:119
 #: plugins/mediaplayer/videowidget.cpp:73
 #, kde-format
 msgid "Play"
 msgstr "播放"
 
 #: plugins/mediaplayer/mediaplayeractivity.cpp:123
 #, kde-format
 msgid "Pause"
 msgstr "暫停"
 
 #: plugins/mediaplayer/mediaplayeractivity.cpp:127
 #: plugins/mediaplayer/videowidget.cpp:76
 #, kde-format
 msgid "Stop"
 msgstr "停止"
 
 #: plugins/mediaplayer/mediaplayeractivity.cpp:131
 #, kde-format
 msgid "Previous"
 msgstr "前一個"
 
 #: plugins/mediaplayer/mediaplayeractivity.cpp:135
 #, kde-format
 msgid "Next"
 msgstr "下一個"
 
 #: plugins/mediaplayer/mediaplayeractivity.cpp:139
 #, kde-format
 msgid "Show Video"
 msgstr "顯示影像"
 
 #: plugins/mediaplayer/mediaplayeractivity.cpp:143
 #: plugins/mediaplayer/playlistwidget.cpp:55
 #, kde-format
 msgid "Add Media"
 msgstr "新增媒體"
 
 #: plugins/mediaplayer/mediaplayeractivity.cpp:147
 #: plugins/mediaplayer/playlistwidget.cpp:57
 #, kde-format
 msgid "Clear Playlist"
 msgstr "清除播放清單"
 
 #: plugins/mediaplayer/mediaplayeractivity.cpp:151
 #, kde-format
 msgid "Toggle Fullscreen"
 msgstr "切換全鎣幕"
 
 #: plugins/mediaplayer/mediaplayeractivity.cpp:178
 #: plugins/mediaplayer/mediaplayeractivity.cpp:371
 #, kde-format
 msgid "Movie player"
 msgstr "電影播放程式"
 
 #: plugins/mediaplayer/mediaview.cpp:101
 #, kde-format
 msgid "Show incomplete files"
 msgstr "顯示不完整的檔案"
 
 #. i18n: ectx: property (text), widget (QPushButton, m_refresh)
 #: plugins/mediaplayer/mediaview.cpp:106 plugins/syndication/feedwidget.ui:124
 #, kde-format
 msgid "Refresh"
 msgstr "刷新"
 
 #: plugins/mediaplayer/mediaview.cpp:107
 #, kde-format
 msgid "Refresh media files"
 msgstr "刷新媒體檔案"
 
 #: plugins/mediaplayer/mediaview.cpp:111
 #, kde-format
 msgid "Search media files"
 msgstr "搜索媒體檔案"
 
 #: plugins/mediaplayer/playlist.cpp:103
 #: plugins/syndication/feedwidgetmodel.cpp:93
 #, kde-format
 msgid "Title"
 msgstr "標題"
 
 #: plugins/mediaplayer/playlist.cpp:104
 #, kde-format
 msgid "Artist"
 msgstr "演出者"
 
 #: plugins/mediaplayer/playlist.cpp:105
 #, kde-format
 msgid "Album"
 msgstr "專輯"
 
 #: plugins/mediaplayer/playlist.cpp:106
 #, kde-format
 msgid "Length"
 msgstr "長度"
 
 #: plugins/mediaplayer/playlist.cpp:107
 #, kde-format
 msgid "Year"
 msgstr "年份"
 
 #: plugins/mediaplayer/playlistwidget.cpp:64
 #, kde-format
 msgid "Random play order"
 msgstr "隨機播放順序"
 
 #: plugins/mediaplayer/videowidget.cpp:208
 #, kde-format
 msgid "KTorrent is playing a video."
 msgstr "KTorrent 正在播放影片。"
 
 #. i18n: ectx: label, entry (openSilently), group (general)
 #: plugins/scanfolder/ktscanfolderplugin.kcfg:13
 #, kde-format
 msgid "Whether to open torrent silently or not."
 msgstr "是否要無聲地開啟 torrent 檔。"
 
 #. i18n: ectx: label, entry (actionDelete), group (general)
 #: plugins/scanfolder/ktscanfolderplugin.kcfg:18
 #, kde-format
 msgid "Delete action checked."
 msgstr "刪除勾選的動作。"
 
 #. i18n: ectx: label, entry (actionMove), group (general)
 #: plugins/scanfolder/ktscanfolderplugin.kcfg:23
 #, kde-format
 msgid "Move action checked."
 msgstr "移動勾選的動作。"
 
 #. i18n: ectx: label, entry (recursive), group (general)
 #: plugins/scanfolder/ktscanfolderplugin.kcfg:28
 #, kde-format
 msgid "Scan directories recursively."
 msgstr "遞迴掃描目錄。"
 
 #: plugins/scanfolder/scanfolder.cpp:81 plugins/scanfolder/scanthread.cpp:198
 #: plugins/scanfolder/torrentloadqueue.cpp:168
 #: plugins/scanfolder/torrentloadqueue.cpp:169
 #: plugins/scanfolder/torrentloadqueue.cpp:172
 #, kde-format
 msgctxt "folder name part"
 msgid "loaded"
 msgstr "已載入"
 
 #: plugins/scanfolder/scanfolderplugin.cpp:62
 #: plugins/scanfolder/scanfolderplugin.cpp:75
 #: plugins/scanfolder/scanfolderprefpage.cpp:38
 #, kde-format
 msgctxt "plugin name"
 msgid "Scan Folder"
 msgstr "掃描資料夾"
 
 #. i18n: ectx: property (text), widget (QLabel, label)
 #: plugins/scanfolder/scanfolderprefpage.ui:17
 #, kde-format
 msgid "Folders to scan for torrents:"
 msgstr "torrent 掃描的資料夾："
 
 #. i18n: ectx: property (toolTip), widget (QListWidget, m_folders)
 #: plugins/scanfolder/scanfolderprefpage.ui:26
 #, kde-format
 msgid "List of folders which will be scanned for torrents by this plugin."
 msgstr "此外掛程式會掃描哪些資料夾中的 torrent。"
 
 #. i18n: ectx: property (toolTip), widget (QPushButton, m_add)
 #: plugins/scanfolder/scanfolderprefpage.ui:35
 #, kde-format
 msgid "Add a new folder to be scanned."
 msgstr "新增要掃描的資料夾。"
 
 #. i18n: ectx: property (text), widget (QPushButton, m_add)
 #: plugins/scanfolder/scanfolderprefpage.ui:38
 #, kde-format
 msgid "Add Folder"
 msgstr "加入資料夾"
 
 #. i18n: ectx: property (toolTip), widget (QPushButton, m_remove)
 #: plugins/scanfolder/scanfolderprefpage.ui:45
 #, kde-format
 msgid "Remove a folder from the list."
 msgstr "從清單中移除資料夾。"
 
 #. i18n: ectx: property (text), widget (QPushButton, m_remove)
 #: plugins/scanfolder/scanfolderprefpage.ui:48
 #, kde-format
 msgid "Remove Folder"
 msgstr "移除資料夾"
 
 #. i18n: ectx: property (toolTip), widget (QCheckBox, kcfg_openSilently)
 #: plugins/scanfolder/scanfolderprefpage.ui:78
 #, kde-format
 msgid "Open the torrents without asking any questions."
 msgstr "開啟 torrent 時不詢問任何問題。"
 
 #. i18n: ectx: property (toolTip), widget (QCheckBox, kcfg_recursive)
 #: plugins/scanfolder/scanfolderprefpage.ui:89
 #, kde-format
 msgid ""
 "Scan the folder recursively for torrents. <br/><br/>\n"
 "Note: This will not be done for any folder named loaded."
 msgstr ""
 "遞迴掃描資料夾尋找 torrents。<br/><br/>\n"
 "注意：若資料夾名稱為 loaded 則不會掃描。"
 
 #. i18n: ectx: property (text), widget (QCheckBox, kcfg_recursive)
 #: plugins/scanfolder/scanfolderprefpage.ui:92
 #, kde-format
 msgid "Scan subfolders"
 msgstr "掃描子資料夾"
 
 #. i18n: ectx: property (toolTip), widget (QCheckBox, kcfg_actionDelete)
 #: plugins/scanfolder/scanfolderprefpage.ui:100
 #, kde-format
 msgid ""
 "When a torrent file has been found and loaded, delete it.<br/><br/>\n"
 "Warning: you will permanently lose this file."
 msgstr ""
 "當找到一個 torrent 檔並載入後，將該檔刪除。<br/><br/>\n"
 "警告：您將永遠失去此檔案。"
 
 #. i18n: ectx: property (text), widget (QCheckBox, kcfg_actionDelete)
 #: plugins/scanfolder/scanfolderprefpage.ui:103
 #, kde-format
 msgid "Remove torrent file after loading"
 msgstr "載入後移除 torrent 檔"
 
 #. i18n: ectx: property (toolTip), widget (QCheckBox, kcfg_actionMove)
 #: plugins/scanfolder/scanfolderprefpage.ui:110
 #, kde-format
 msgid ""
 "When a torrent file is loaded, move it to a subdirectory named loaded. If "
 "the folder does not exist, it will be created."
-msgstr ""
-"載入 torrent 檔後，將它移到名為 loaded 的子目錄。如果目錄不存在，就建立它。"
+msgstr "載入 torrent 檔後，將它移到名為 loaded 的子目錄。如果目錄不存在，就建立它。"
 
 #. i18n: ectx: property (text), widget (QCheckBox, kcfg_actionMove)
 #: plugins/scanfolder/scanfolderprefpage.ui:113
 #, kde-format
 msgid "Move torrent file to loaded directory"
 msgstr "將 torrent 檔移到 loaded 子目錄"
 
 #. i18n: ectx: property (toolTip), widget (QCheckBox, kcfg_addToGroup)
 #: plugins/scanfolder/scanfolderprefpage.ui:122
 #, kde-format
 msgid "Add torrents opened with this plugin to a group."
 msgstr "將此外掛程式開啟的 torrent 新增到群組中。"
 
 #. i18n: ectx: property (toolTip), widget (QComboBox, m_group)
 #: plugins/scanfolder/scanfolderprefpage.ui:132
 #, kde-format
 msgid "Group to add torrents to."
 msgstr "要新增到哪個群組。"
 
 #. i18n: ectx: ToolBar (ScriptingToolbar)
 #. i18n: ectx: Menu (ScriptingMenu)
 #: plugins/scripting/ktorrent_scriptingui.rc:4
 #: plugins/scripting/ktorrent_scriptingui.rc:15
 #: plugins/scripting/scriptingplugin.cpp:78
 #: plugins/scripting/scriptingplugin.cpp:99
 #, kde-format
 msgid "Scripting"
 msgstr "文稿"
 
 #: plugins/scripting/scriptingplugin.cpp:187
 #, kde-format
 msgid "KTorrent Script Packages"
 msgstr "KTorrent 文稿套件包"
 
 #: plugins/scripting/scriptingplugin.cpp:188
 #: plugins/scripting/scriptmanager.cpp:50
 #, kde-format
 msgid "Scripts"
 msgstr "文稿"
 
 #: plugins/scripting/scriptingplugin.cpp:248
 #, kde-format
 msgid ""
 "Removing these scripts will fully delete them from your disk. Are you sure "
 "you want to do this?"
 msgstr "移除這些文稿將會完全從磁碟機中移除。您確定要這樣做嗎？"
 
 #: plugins/scripting/scriptmanager.cpp:54
 #, kde-format
 msgid "Widget to start, stop and manage scripts"
 msgstr "開始、停止與管理文稿的元件"
 
 #: plugins/scripting/scriptmanager.cpp:97
 #, kde-format
 msgid "Add Script"
 msgstr "新增文稿"
 
 #: plugins/scripting/scriptmanager.cpp:101
 #, kde-format
 msgid "Remove Script"
 msgstr "移除文稿"
 
 #: plugins/scripting/scriptmanager.cpp:105
 #, kde-format
 msgid "Run Script"
 msgstr "執行文稿"
 
 #: plugins/scripting/scriptmanager.cpp:109
 #, kde-format
 msgid "Stop Script"
 msgstr "停止文稿"
 
 #: plugins/scripting/scriptmanager.cpp:113
 #, kde-format
 msgid "Edit Script"
 msgstr "編輯文稿"
 
 #: plugins/scripting/scriptmanager.cpp:121
 #, kde-format
 msgid "Configure"
 msgstr "設定"
 
 #. i18n: ectx: property (windowTitle), widget (QWidget, ScriptProperties)
 #: plugins/scripting/scriptmanager.cpp:245
 #: plugins/scripting/scriptproperties.ui:13
 #, kde-format
 msgid "Script Properties"
 msgstr "文稿屬性"
 
 #: plugins/scripting/scriptmodel.cpp:116
 #, kde-format
 msgid "Cannot open archive for reading."
 msgstr "無法開啟歸檔以讀取。"
 
 #: plugins/scripting/scriptmodel.cpp:120
 #, kde-format
 msgid "Invalid archive."
 msgstr "不合法的歸檔。"
 
 #: plugins/scripting/scriptmodel.cpp:147
 #, kde-format
 msgid "There is already a script package named %1 installed."
 msgstr "已經安裝名為 <b>%1</b> 的文稿套件包了。"
 
 #: plugins/scripting/scriptmodel.cpp:153
 #, kde-format
 msgid ""
 "Failed to load script from archive. There is something wrong with the "
 "desktop file."
 msgstr "從歸檔中下載文稿失敗。desktop 檔可能有些問題。"
 
 #: plugins/scripting/scriptmodel.cpp:158
 #, kde-format
 msgid "No script found in archive."
 msgstr "歸檔中找不到文稿。"
 
 #: plugins/scripting/scriptmodel.cpp:183 plugins/syndication/feedlist.cpp:187
 #, kde-format
 msgid "<b>%1</b><br/><br/>%2"
 msgstr "<b>%1</b><br/><br/>%2"
 
 #: plugins/scripting/scriptmodel.cpp:185
 #, kde-format
 msgid ""
 "No interpreter for this script could be found, so it cannot be executed. "
 "Please make sure the right interpreter is installed.<br/><br/><b>Hint:</b> "
 "All standard ktorrent scripts require krosspython"
 msgstr ""
 "找不到此文稿所使用的解譯器，所以無法執行。請確定您已安裝正確的解譯器。<br/"
 "><br/><b>提示：</b>所有標準的 ktorrent 文稿都需要 krosspython"
 
 #. i18n: ectx: property (text), widget (QLabel, label_2)
 #: plugins/scripting/scriptproperties.ui:51
 #, kde-format
 msgid "Description:"
 msgstr "描述："
 
 #. i18n: ectx: property (text), widget (QLabel, label_5)
 #: plugins/scripting/scriptproperties.ui:65
 #, kde-format
 msgid "License:"
 msgstr "授權："
 
 #. i18n: ectx: property (text), widget (QLabel, label_3)
 #: plugins/scripting/scriptproperties.ui:79
 #, kde-format
 msgid "Author:"
 msgstr "作者："
 
 #. i18n: ectx: property (text), widget (QLabel, label_4)
 #: plugins/scripting/scriptproperties.ui:93
 #, kde-format
 msgid "E-Mail:"
 msgstr "電子郵件地址："
 
 #. i18n: ectx: property (text), widget (QLabel, label_6)
 #: plugins/scripting/scriptproperties.ui:107
 #, kde-format
 msgid "Website:"
 msgstr "網站："
 
 #: plugins/scripting/scripts/auto_remove/auto_remove.py:53
 msgid "Auto Remove Settings"
 msgstr "自動移除設定"
 
 #: plugins/scripting/scripts/auto_remove/auto_remove.py:55
 msgid "Auto Remove"
 msgstr "自動移除"
 
 #. i18n: ectx: property (windowTitle), widget (QWidget, AutoRemoveConfig)
 #. i18n: ectx: property (windowTitle), widget (QWidget, AutoResumeConfig)
 #: plugins/scripting/scripts/auto_remove/auto_remove.ui:13
 #: plugins/scripting/scripts/auto_resume/auto_resume.py:53
 #: plugins/scripting/scripts/auto_resume/auto_resume.ui:13
 #, kde-format
 msgid "Auto Resume Settings"
 msgstr "自動回復設定"
 
 #. i18n: ectx: property (text), widget (QLabel, label)
 #: plugins/scripting/scripts/auto_remove/auto_remove.ui:19
 #, kde-format
 msgid "Auto remove a torrent when:"
 msgstr "自動移除 torrent 時間："
 
 #. i18n: ectx: property (text), widget (QCheckBox, finish_downloading)
 #: plugins/scripting/scripts/auto_remove/auto_remove.ui:26
 #, kde-format
 msgid "The torrent finishes downloading"
 msgstr "此 torrent 已完成下載"
 
 #. i18n: ectx: property (text), widget (QCheckBox, finish_seeding)
 #: plugins/scripting/scripts/auto_remove/auto_remove.ui:33
 #, kde-format
 msgid "The torrent finishes seeding"
 msgstr "此 torrent 已完成播種"
 
 #: plugins/scripting/scripts/auto_resume/auto_resume.py:55
 msgid "Auto Resume"
 msgstr "自動回復"
 
 #. i18n: ectx: property (text), widget (QCheckBox, auto_resume)
 #: plugins/scripting/scripts/auto_resume/auto_resume.ui:19
 #, kde-format
 msgid "Auto resume after:"
 msgstr "自動回復時間："
 
 #. i18n: ectx: property (suffix), widget (QSpinBox, hours)
 #: plugins/scripting/scripts/auto_resume/auto_resume.ui:41
 #, kde-format
 msgid " hours"
 msgstr " 小時"
 
 #. i18n: ectx: property (suffix), widget (QSpinBox, m_refresh_rate)
 #. i18n: ectx: property (suffix), widget (QSpinBox, minutes)
 #: plugins/scripting/scripts/auto_resume/auto_resume.ui:51
 #: plugins/syndication/feedwidget.ui:141
 #, kde-format
 msgid " minutes"
 msgstr " 分鐘"
 
 #. i18n: ectx: property (suffix), widget (QSpinBox, seconds)
 #: plugins/scripting/scripts/auto_resume/auto_resume.ui:61
 #, kde-format
 msgid " seconds"
 msgstr " 秒"
 
 #: plugins/scripting/scripts/email_notifications/email_notifications.py:105
 msgid "E-Mail Script Settings"
 msgstr "電子郵件文稿設定"
 
 #: plugins/scripting/scripts/email_notifications/email_notifications.py:107
 msgid "E-Mail Settings"
 msgstr "電子郵件設定"
 
 #. i18n: ectx: property (windowTitle), widget (QWidget, EMailConfigWidget)
 #: plugins/scripting/scripts/email_notifications/emailconfig.ui:13
 #, kde-format
 msgid "EMail Settings"
 msgstr "電子郵件設定"
 
 #. i18n: ectx: property (title), widget (QGroupBox, groupBox)
 #: plugins/scripting/scripts/email_notifications/emailconfig.ui:19
 #, kde-format
 msgid "SMTP Server"
 msgstr "SMTP 伺服器"
 
 #. i18n: ectx: property (text), widget (QLabel, label_3)
 #: plugins/scripting/scripts/email_notifications/emailconfig.ui:49
 #, kde-format
 msgid "SMTP server:"
 msgstr "SMTP 伺服器："
 
 #. i18n: ectx: property (text), widget (QCheckBox, tls)
 #: plugins/scripting/scripts/email_notifications/emailconfig.ui:80
 #, kde-format
 msgid "Use SSL/TLS encryption"
 msgstr "使用 SSL/TLS 加密"
 
 #. i18n: ectx: property (title), widget (QGroupBox, groupBox_2)
 #: plugins/scripting/scripts/email_notifications/emailconfig.ui:90
 #, kde-format
 msgid "Destination"
 msgstr "目的地"
 
 #. i18n: ectx: property (text), widget (QLabel, label_5)
 #: plugins/scripting/scripts/email_notifications/emailconfig.ui:96
 #, kde-format
 msgid "Send mails to:"
 msgstr "發送郵件給："
 
 #. i18n: ectx: property (text), widget (QCheckBox, add_cc)
 #: plugins/scripting/scripts/email_notifications/emailconfig.ui:106
 #, kde-format
 msgid "Add CC:"
 msgstr "新增複本收件人："
 
 #. i18n: ectx: property (text), widget (QCheckBox, add_bcc)
 #: plugins/scripting/scripts/email_notifications/emailconfig.ui:116
 #, kde-format
 msgid "Add BCC:"
 msgstr "新增密件複本收件人："
 
 #. i18n: ectx: ToolBar (SearchToolBar)
 #: plugins/search/ktorrent_searchui.rc:3
 #, kde-format
 msgid "Search Toolbar"
 msgstr "搜尋工具列"
 
 #. i18n: ectx: label, entry (searchEngine), group (general)
 #: plugins/search/ktsearchplugin.kcfg:10
 #, kde-format
 msgid "Current search engine"
 msgstr "目前的搜尋引擎"
 
 #. i18n: ectx: label, entry (useProxySettings), group (general)
 #. i18n: ectx: property (text), widget (QCheckBox, kcfg_useProxySettings)
 #: plugins/search/ktsearchplugin.kcfg:14 plugins/search/searchpref.ui:92
 #, kde-format
 msgid "Use proxy settings for search"
 msgstr "為搜尋使用代理伺服器設定"
 
 #. i18n: ectx: label, entry (useDefaultBrowser), group (general)
 #. i18n: ectx: property (text), widget (QRadioButton, kcfg_useDefaultBrowser)
 #: plugins/search/ktsearchplugin.kcfg:18 plugins/search/searchpref.ui:102
 #, kde-format
 msgid "Use default browser"
 msgstr "使用預設的瀏覽器"
 
 #. i18n: ectx: label, entry (useCustomBrowser), group (general)
 #: plugins/search/ktsearchplugin.kcfg:22
 #, kde-format
 msgid "Use custom browser"
 msgstr "使用自訂的瀏覽器"
 
 #. i18n: ectx: label, entry (customBrowser), group (general)
 #: plugins/search/ktsearchplugin.kcfg:26
 #, kde-format
 msgid "Custom browser executable path"
 msgstr "自訂瀏覽器的執行路徑"
 
 #: plugins/search/searchactivity.cpp:52 plugins/search/searchplugin.cpp:66
 #: plugins/search/searchplugin.cpp:85 plugins/search/searchprefpage.cpp:57
 #, kde-format
 msgctxt "plugin name"
 msgid "Search"
 msgstr "搜尋"
 
 #: plugins/search/searchactivity.cpp:250
 #, kde-format
 msgid "Search for %1"
 msgstr "搜尋 %1"
 
 #: plugins/search/searchenginelist.cpp:219
 #, kde-format
 msgid "Failed to parse %1"
 msgstr "無法剖析 %1"
 
 #: plugins/search/searchenginelist.cpp:372
 #, kde-format
 msgid "URL: <b>%1</b>"
 msgstr "網址：<b>%1</b>"
 
 #. i18n: ectx: property (windowTitle), widget (QWidget, SearchPref)
 #. i18n: ectx: property (windowTitle), widget (QWidget, WebInterfacePrefWidget)
 #: plugins/search/searchpref.ui:26
 #: plugins/webinterface/webinterfaceprefwidget.ui:26
 #, kde-format
 msgid "Search Preferences"
 msgstr "搜尋喜好設定"
 
 #. i18n: ectx: property (toolTip), widget (QPushButton, m_clear_history)
 #: plugins/search/searchpref.ui:34
 #, kde-format
 msgid "Clear the search history combo boxes."
 msgstr "清除搜尋歷史的下拉式選單。"
 
 #. i18n: ectx: property (text), widget (QPushButton, m_clear_history)
 #: plugins/search/searchpref.ui:37
 #, kde-format
 msgid "Clear Search History"
 msgstr "清除搜尋歷史"
 
 #. i18n: ectx: property (toolTip), widget (QPushButton, m_reset_default_action)
 #: plugins/search/searchpref.ui:44
 #, kde-format
 msgid "Reset the default action taken when a torrent is downloaded."
 msgstr "重置 torrent 下載後預設要執行的動作。"
 
 #. i18n: ectx: property (text), widget (QPushButton, m_reset_default_action)
 #: plugins/search/searchpref.ui:47
 #, kde-format
 msgid "Reset Default Torrent Action"
 msgstr "重置預設動作"
 
 #. i18n: ectx: property (toolTip), widget (QCheckBox, kcfg_restorePreviousSession)
 #: plugins/search/searchpref.ui:69
 #, kde-format
 msgid "Restore all the active searches of the last session"
 msgstr "回復上次工作階段中所有作用中的搜尋"
 
 #. i18n: ectx: property (text), widget (QCheckBox, kcfg_restorePreviousSession)
 #: plugins/search/searchpref.ui:72
 #, kde-format
 msgid "Restore previous searches"
 msgstr "回復先前的搜尋"
 
 #. i18n: ectx: property (toolTip), widget (QCheckBox, kcfg_openInExternal)
 #: plugins/search/searchpref.ui:79
 #, kde-format
 msgid "Whether or not to open searches in an external browser."
 msgstr "是否在外部瀏覽器開啟搜尋。"
 
 #. i18n: ectx: property (text), widget (QCheckBox, kcfg_openInExternal)
 #: plugins/search/searchpref.ui:82
 #, kde-format
 msgid "Open searches in external browser"
 msgstr "在外部瀏覽器開啟搜尋"
 
 #. i18n: ectx: property (toolTip), widget (QCheckBox, kcfg_useProxySettings)
 #: plugins/search/searchpref.ui:89
 #, kde-format
 msgid "Whether or not to use the HTTP proxy settings for search."
 msgstr "搜尋是否使用 HTTP 代理伺服器設定"
 
 #. i18n: ectx: property (toolTip), widget (QRadioButton, kcfg_useDefaultBrowser)
 #: plugins/search/searchpref.ui:99
 #, kde-format
 msgid "Use the default browser configured in the system settings."
 msgstr "使用系統設定中的預設瀏覽器。"
 
 #. i18n: ectx: property (toolTip), widget (QRadioButton, kcfg_useCustomBrowser)
 #: plugins/search/searchpref.ui:114
 #, kde-format
 msgid "Use a custom browser."
 msgstr "使用自訂的瀏覽器"
 
 #. i18n: ectx: property (text), widget (QRadioButton, kcfg_useCustomBrowser)
 #: plugins/search/searchpref.ui:117
 #, kde-format
 msgid "Custom browser path:"
 msgstr "自訂瀏覽器的路徑"
 
 #. i18n: ectx: property (toolTip), widget (QLineEdit, kcfg_customBrowser)
 #: plugins/search/searchpref.ui:127
 #, kde-format
 msgid "Path of the custom browser."
 msgstr "自訂瀏覽器的路徑。"
 
 #. i18n: ectx: property (title), widget (QGroupBox, groupBox8)
 #: plugins/search/searchpref.ui:152
 #, kde-format
 msgid "Search Engines"
 msgstr "搜索引擎"
 
 #. i18n: ectx: property (toolTip), widget (QPushButton, m_add)
 #: plugins/search/searchpref.ui:167
 #, kde-format
 msgid "Add a new search engine."
 msgstr "新增搜尋引擎。"
 
 #. i18n: ectx: property (toolTip), widget (QPushButton, m_remove)
 #: plugins/search/searchpref.ui:177
 #, kde-format
 msgid "Remove all selected search engines."
 msgstr "移除所有選取的搜尋引擎。"
 
 #. i18n: ectx: property (text), widget (QPushButton, m_remove)
 #: plugins/search/searchpref.ui:180
 #, kde-format
 msgid "&Remove"
 msgstr "移除(&R)"
 
 #. i18n: ectx: property (toolTip), widget (QPushButton, m_remove_all)
 #: plugins/search/searchpref.ui:187
 #, kde-format
 msgid "Remove all search engines."
 msgstr "移除所有的搜尋引擎。"
 
 #. i18n: ectx: property (text), widget (QPushButton, m_remove_all)
 #: plugins/search/searchpref.ui:190
 #, kde-format
 msgid "R&emove All"
 msgstr "全部移除(&E)"
 
 #. i18n: ectx: property (toolTip), widget (QPushButton, m_add_default)
 #: plugins/search/searchpref.ui:210
 #, kde-format
 msgid "Add all default search engines."
 msgstr "新增所有預設的搜尋引擎。"
 
 #. i18n: ectx: property (text), widget (QPushButton, m_add_default)
 #: plugins/search/searchpref.ui:213
 #, kde-format
 msgid "Add Defau&lt"
 msgstr "新增預設值(&L)"
 
 #: plugins/search/searchprefpage.cpp:103 plugins/search/searchprefpage.cpp:143
 #, kde-format
 msgid "Add a Search Engine"
 msgstr "新增搜尋引擎"
 
 #: plugins/search/searchprefpage.cpp:104
 #, kde-format
 msgid "Enter the hostname of the search engine (for example www.google.com):"
 msgstr "輸入搜尋引擎的主機名稱（例如 www.google.com）："
 
 #: plugins/search/searchprefpage.cpp:141
 #, kde-format
 msgid ""
 "Opensearch is not supported by %1, you will need to enter the search URL "
 "manually. The URL should contain {searchTerms}, ktorrent will replace this "
 "by the thing you are searching for."
 msgstr ""
 "%1 並未支援 Opensearch，您需要手動輸入搜尋網址。網址必須包含 {searchTerms}，"
 "ktorrent 會將它轉換成您的搜尋字串。"
 
 #: plugins/search/searchprefpage.cpp:148
 #, kde-format
 msgid "The URL %1 does not contain {searchTerms}."
 msgstr "網址 %1 中並未包含 {searchTerms}。"
 
 #: plugins/search/searchtoolbar.cpp:72
 #, kde-format
 msgid "Search Text"
 msgstr "搜尋文字"
 
 #: plugins/search/searchtoolbar.cpp:82
 #, kde-format
 msgid "Search Engine"
 msgstr "搜尋引擎"
 
 #: plugins/search/searchtoolbar.cpp:89
 #, kde-format
 msgid "Search Engine Label"
 msgstr "搜尋引擎標籤"
 
 #: plugins/search/searchtoolbar.cpp:90 plugins/search/searchwidget.cpp:77
 #, kde-format
 msgid " Engine: "
 msgstr "引擎："
 
 #: plugins/search/searchwidget.cpp:212
 #, kde-format
 msgid "Downloading:<br/><b>%1</b>"
 msgstr "下載中：<br/><b>%1</b>"
 
 #: plugins/search/searchwidget.cpp:252
 #, kde-format
 msgid "Do you want to download or save the torrent?"
 msgstr "您要下載還是要儲存此 torrent？"
 
 #: plugins/search/searchwidget.cpp:253
 #, kde-format
 msgid "Download Torrent"
 msgstr "下載 torrent"
 
 #. i18n: ectx: property (text), widget (QPushButton, m_download)
 #: plugins/search/searchwidget.cpp:254 plugins/syndication/feedwidget.ui:117
 #, kde-format
 msgid "Download"
 msgstr "下載"
 
 #: plugins/search/webview.cpp:171
 #, kde-format
 msgid "Home"
 msgstr "首頁"
 
 #: plugins/search/webview.cpp:172
 #, kde-format
 msgid "KTorrent"
 msgstr "KTorrent"
 
 #: plugins/search/webview.cpp:173
 #, kde-format
 msgctxt "KDE 4 tag line, see http://kde.org/img/kde40.png"
 msgid "Be free."
 msgstr "擁抱自由！"
 
 #: plugins/search/webview.cpp:174
 #, kde-format
 msgid "Search the web for torrents."
 msgstr "搜尋網站尋找 torrent。"
 
 #: plugins/search/webview.cpp:203
 #, kde-format
 msgid "Save %1 to"
 msgstr "儲存 %1 到"
 
 #. i18n: ectx: Menu (shutdown)
 #: plugins/shutdown/ktorrent_shutdownui.rc:5
 #: plugins/shutdown/shutdowndlg.cpp:39 plugins/shutdown/shutdownplugin.cpp:146
 #: plugins/shutdown/shutdownruleset.cpp:272
 #, kde-format
 msgid "Shutdown"
 msgstr "關機"
 
 #. i18n: ectx: ToolBar (ShutdownToolBar)
 #: plugins/shutdown/ktorrent_shutdownui.rc:11
 #, kde-format
 msgid "Shutdown Toolbar"
 msgstr "關機工具列"
 
 #: plugins/shutdown/shutdowndlg.cpp:36
 #, kde-format
 msgctxt "@title:window"
 msgid "Configure Shutdown"
 msgstr "設定關機"
 
 #: plugins/shutdown/shutdowndlg.cpp:40 plugins/shutdown/shutdownplugin.cpp:150
 #: plugins/shutdown/shutdownruleset.cpp:275
 #, kde-format
 msgid "Lock"
 msgstr "鎖定"
 
 #: plugins/shutdown/shutdowndlg.cpp:48 plugins/shutdown/shutdownplugin.cpp:154
 #: plugins/shutdown/shutdownruleset.cpp:278
 #, kde-format
 msgid "Sleep (suspend to RAM)"
 msgstr "睡眠（暫停並儲存到記憶體）"
 
 #: plugins/shutdown/shutdowndlg.cpp:54 plugins/shutdown/shutdownplugin.cpp:158
 #: plugins/shutdown/shutdownruleset.cpp:281
 #, kde-format
 msgid "Hibernate (suspend to disk)"
 msgstr "冬眠（暫停並儲存到磁碟）"
 
 #: plugins/shutdown/shutdowndlg.cpp:56
 #, kde-format
 msgid "When all torrents finish downloading"
 msgstr "當 torrent 完成下載後"
 
 #: plugins/shutdown/shutdowndlg.cpp:57
 #, kde-format
 msgid "When all torrents finish seeding"
 msgstr "當所有的 torrents 完成播種時"
 
 #: plugins/shutdown/shutdowndlg.cpp:58
 #, kde-format
 msgid "When the events below happen"
 msgstr "當底下所有事件發生時"
 
 #. i18n: ectx: property (windowTitle), widget (QWidget, ShutdownDlg)
 #: plugins/shutdown/shutdowndlg.ui:14
 #, kde-format
 msgid "Shutdown Settings"
 msgstr "關機設定"
 
 #. i18n: ectx: property (text), widget (QLabel, label)
 #: plugins/shutdown/shutdowndlg.ui:34
 #, kde-format
 msgid "Action to execute:"
 msgstr "要執行的動作："
 
 #. i18n: ectx: property (text), widget (QLabel, label_2)
 #: plugins/shutdown/shutdowndlg.ui:44
 #, kde-format
 msgid "Execute action when:"
 msgstr "執行動作時機："
 
 #. i18n: ectx: property (toolTip), widget (QCheckBox, m_all_rules_must_be_hit)
 #: plugins/shutdown/shutdowndlg.ui:59
 #, kde-format
 msgid ""
 "When enabled, execute the action when all events have happened. When not "
 "enabled, execute when any of the above events have happened."
 msgstr ""
 "開啟此選項時，當所有的事件都發生時才會執行動作。反之，則在任何一個事件發生時"
 "就執行動作。"
 
 #. i18n: ectx: property (text), widget (QCheckBox, m_all_rules_must_be_hit)
 #: plugins/shutdown/shutdowndlg.ui:62
 #, kde-format
 msgid "All events must have happened"
 msgstr "所有事件都必須發生"
 
 #: plugins/shutdown/shutdownplugin.cpp:48
 #, kde-format
 msgid "Shutdown Enabled"
 msgstr "關機功能開啟"
 
 #: plugins/shutdown/shutdownplugin.cpp:52
 #, kde-format
 msgid "Configure Shutdown"
 msgstr "設定關機"
 
 #: plugins/shutdown/shutdownruleset.cpp:263
 #, kde-format
 msgid "Automatic shutdown not active"
 msgstr "自動關閉非作用中的"
 
 #: plugins/shutdown/shutdownruleset.cpp:287
 #, kde-format
 msgid " when all of the following events have occurred:<br/><br/> "
 msgstr "當以下事件全都發生時：<br/><br/> "
 
 #: plugins/shutdown/shutdownruleset.cpp:289
 #, kde-format
 msgid " when one of the following events occur:<br/><br/> "
 msgstr "當以下事件其中一件發生時：<br/><br/> "
 
 #: plugins/shutdown/shutdownruleset.cpp:371
 #, kde-format
 msgid "<b>All torrents</b> finish downloading"
 msgstr "<b>所有的 torrents</b> 完成下載時"
 
 #: plugins/shutdown/shutdownruleset.cpp:373
 #, kde-format
 msgid "<b>All torrents</b> finish seeding"
 msgstr "<b>所有的 torrents</b> 完成播種時"
 
 #: plugins/shutdown/shutdownruleset.cpp:375
 #, kde-format
 msgid "<b>%1</b> finishes downloading"
 msgstr "<b>%1</b> 完成下載時"
 
 #: plugins/shutdown/shutdownruleset.cpp:377
 #, kde-format
 msgid "<b>%1</b> finishes seeding"
 msgstr "<b>%1</b> 完成播種時"
 
 #: plugins/shutdown/shutdowntorrentmodel.cpp:94
 #: plugins/shutdown/shutdowntorrentmodel.cpp:237
 #, kde-format
 msgid "Downloading finishes"
 msgstr "下載完成"
 
 #: plugins/shutdown/shutdowntorrentmodel.cpp:96
 #: plugins/shutdown/shutdowntorrentmodel.cpp:238
 #, kde-format
 msgid "Seeding finishes"
 msgstr "播種完成"
 
 #: plugins/shutdown/shutdowntorrentmodel.cpp:156
 #, kde-format
 msgid "Event"
 msgstr "事件"
 
 #. i18n: ectx: property (windowTitle), widget (QWidget, ConnsWgt)
 #: plugins/stats/Conns.ui:13 plugins/stats/ConnsTabPage.cc:53
 #, kde-format
 msgid "Connections"
 msgstr "連線"
 
 #. i18n: ectx: property (text), widget (QLabel, label_11)
 #. i18n: ectx: attribute (title), widget (QWidget, tab_4)
 #. i18n: ectx: property (title), widget (QGroupBox, ConnsGbw)
 #: plugins/stats/Conns.ui:19 plugins/stats/DisplaySettings.ui:505
 #: plugins/stats/Settings.ui:140
 #, kde-format
 msgctxt "Chart name"
 msgid "Connections"
 msgstr "連線"
 
 #. i18n: ectx: property (text), widget (QLabel, label_12)
 #. i18n: ectx: attribute (title), widget (QWidget, tab_5)
 #. i18n: ectx: property (title), widget (QGroupBox, DhtGbw)
 #: plugins/stats/Conns.ui:31 plugins/stats/DisplaySettings.ui:796
 #: plugins/stats/Settings.ui:234
 #, kde-format
 msgctxt "Chart name"
 msgid "DHT"
 msgstr "DHT"
 
 #: plugins/stats/ConnsTabPage.cc:54
 #, kde-format
 msgid "Nodes"
 msgstr "節點"
 
 #. i18n: ectx: property (text), widget (QLabel, label_23)
 #: plugins/stats/ConnsTabPage.cc:60 plugins/stats/DisplaySettings.ui:513
 #, kde-format
 msgctxt "Name of a line on chart"
 msgid "Leechers connected"
 msgstr "連線接收者數"
 
 #. i18n: ectx: property (text), widget (QLabel, label_24)
 #: plugins/stats/ConnsTabPage.cc:65 plugins/stats/ConnsTabPage.cc:118
 #: plugins/stats/DisplaySettings.ui:548
 #, kde-format
 msgctxt "Name of a line on chart"
 msgid "Leechers in swarms"
 msgstr "接收者數"
 
 #. i18n: ectx: property (text), widget (QLabel, label_25)
 #: plugins/stats/ConnsTabPage.cc:69 plugins/stats/DisplaySettings.ui:583
 #, kde-format
 msgctxt "Name of a line on chart"
 msgid "Seeds connected"
 msgstr "連線種子數"
 
 #. i18n: ectx: property (text), widget (QLabel, label_26)
 #: plugins/stats/ConnsTabPage.cc:74 plugins/stats/ConnsTabPage.cc:132
 #: plugins/stats/ConnsTabPage.cc:136 plugins/stats/DisplaySettings.ui:618
 #, kde-format
 msgctxt "Name of a line on chart"
 msgid "Seeds in swarms"
 msgstr "種子數"
 
 #. i18n: ectx: property (text), widget (QLabel, label_27)
 #: plugins/stats/ConnsTabPage.cc:78 plugins/stats/DisplaySettings.ui:653
 #, kde-format
 msgctxt "Name of a line on chart"
 msgid "Average leechers connected per torrent"
 msgstr "每個 torrent 平均連線接收者數"
 
 #. i18n: ectx: property (text), widget (QLabel, label_28)
 #: plugins/stats/ConnsTabPage.cc:81 plugins/stats/DisplaySettings.ui:688
 #, kde-format
 msgctxt "Name of a line on chart"
 msgid "Average seeds connected per torrent"
 msgstr "每個 torrent 平均連線種子數"
 
 #: plugins/stats/ConnsTabPage.cc:84
 #, kde-format
 msgctxt "Name of a line on chart"
 msgid "Average leechers connected per running torrent"
 msgstr "每個執行中的 torrent 平均連線接收者數"
 
 #: plugins/stats/ConnsTabPage.cc:87
 #, kde-format
 msgctxt "Name of a line on chart"
 msgid "Average seeds connected per running torrent"
 msgstr "每個執行中的 torrent 平均連線種子數"
 
 #. i18n: ectx: property (text), widget (QLabel, label_31)
 #: plugins/stats/ConnsTabPage.cc:93 plugins/stats/DisplaySettings.ui:806
 #, kde-format
 msgctxt "Name of a line on chart"
 msgid "Nodes"
 msgstr "節點"
 
 #. i18n: ectx: property (text), widget (QLabel, label_32)
 #: plugins/stats/ConnsTabPage.cc:94 plugins/stats/DisplaySettings.ui:845
 #, kde-format
 msgctxt "Name of a line on chart"
 msgid "Tasks"
 msgstr "工作"
 
 #. i18n: ectx: property (text), widget (QLabel, label_6)
 #. i18n: ectx: attribute (title), widget (QWidget, tab)
 #. i18n: ectx: property (title), widget (QGroupBox, DlSpdGbw)
 #: plugins/stats/DisplaySettings.ui:27 plugins/stats/Settings.ui:114
 #: plugins/stats/Spd.ui:19
 #, kde-format
 msgctxt "Chart name"
 msgid "Download"
 msgstr "下載"
 
 #. i18n: ectx: property (text), widget (QLabel, label_8)
 #: plugins/stats/DisplaySettings.ui:37 plugins/stats/SpdTabPage.cc:67
 #, kde-format
 msgctxt "Name of a line on download chart"
 msgid "Current speed"
 msgstr "目前速度"
 
 #. i18n: ectx: property (text), widget (QLabel, label_9)
 #: plugins/stats/DisplaySettings.ui:73
 #, kde-format
 msgctxt "Name of a line on download chart"
 msgid "Average"
 msgstr "平均"
 
 #. i18n: ectx: property (text), widget (QLabel, label_13)
 #: plugins/stats/DisplaySettings.ui:112
 #, kde-format
 msgctxt "Name of a line on download chart"
 msgid "Limit"
 msgstr "限制"
 
 #. i18n: ectx: property (text), widget (QLabel, label_7)
 #. i18n: ectx: attribute (title), widget (QWidget, tab_2)
 #. i18n: ectx: property (title), widget (QGroupBox, PeersSpdGbw)
 #: plugins/stats/DisplaySettings.ui:165 plugins/stats/Settings.ui:166
 #: plugins/stats/Spd.ui:31
 #, kde-format
 msgctxt "Chart name"
 msgid "Peers"
 msgstr "端點"
 
 #. i18n: ectx: property (text), widget (QLabel, label_14)
 #: plugins/stats/DisplaySettings.ui:173 plugins/stats/SpdTabPage.cc:76
 #, kde-format
 msgctxt "Name of a line on chart"
 msgid "Average from leechers"
 msgstr "從接收者的平均"
 
 #. i18n: ectx: property (text), widget (QLabel, label_19)
 #: plugins/stats/DisplaySettings.ui:208 plugins/stats/SpdTabPage.cc:77
 #, kde-format
 msgctxt "Name of a line on chart"
 msgid "Average to leechers"
 msgstr "到接收者的平均"
 
 #. i18n: ectx: property (text), widget (QLabel, label_20)
 #: plugins/stats/DisplaySettings.ui:243 plugins/stats/SpdTabPage.cc:78
 #, kde-format
 msgctxt "Name of a line on chart"
 msgid "Average from seeds"
 msgstr "從種子的平均"
 
 #. i18n: ectx: property (text), widget (QLabel, label_21)
 #: plugins/stats/DisplaySettings.ui:278 plugins/stats/SpdTabPage.cc:79
 #, kde-format
 msgctxt "Name of a line on chart"
 msgid "From leechers"
 msgstr "從接收者"
 
 #. i18n: ectx: property (text), widget (QLabel, label_22)
 #: plugins/stats/DisplaySettings.ui:313 plugins/stats/SpdTabPage.cc:80
 #, kde-format
 msgctxt "Name of a line on chart"
 msgid "From seeds"
 msgstr "從種子"
 
 #. i18n: ectx: property (text), widget (QLabel, label_10)
 #. i18n: ectx: attribute (title), widget (QWidget, tab_3)
 #. i18n: ectx: property (title), widget (QGroupBox, UlSpdGbw)
 #: plugins/stats/DisplaySettings.ui:364 plugins/stats/Settings.ui:192
 #: plugins/stats/Spd.ui:43
 #, kde-format
 msgctxt "Chart name"
 msgid "Upload"
 msgstr "上傳"
 
 #. i18n: ectx: property (text), widget (QLabel, label_15)
 #: plugins/stats/DisplaySettings.ui:374 plugins/stats/SpdTabPage.cc:68
 #, kde-format
 msgctxt "Name of a line on upload chart"
 msgid "Current speed"
 msgstr "目前速度"
 
 #. i18n: ectx: property (text), widget (QLabel, label_16)
 #: plugins/stats/DisplaySettings.ui:413
 #, kde-format
 msgctxt "Name of a line on upload chart"
 msgid "Average"
 msgstr "平均"
 
 #. i18n: ectx: property (text), widget (QLabel, label_17)
 #: plugins/stats/DisplaySettings.ui:452
 #, kde-format
 msgctxt "Name of a line on upload chart"
 msgid "Limit"
 msgstr "限制"
 
 #. i18n: ectx: property (text), widget (QLabel, label_29)
 #: plugins/stats/DisplaySettings.ui:723
 #, kde-format
 msgctxt "Name of a line on chart"
 msgid "Avg. leechers connected per running torr."
 msgstr "每個執行中的 torrent 平均連線接收者數"
 
 #. i18n: ectx: property (text), widget (QLabel, label_30)
 #: plugins/stats/DisplaySettings.ui:758
 #, kde-format
 msgctxt "Name of a line on chart"
 msgid "Avg. seeds connected per running torrent"
 msgstr "每個執行中的 torrent 平均連線種子數"
 
 #. i18n: ectx: property (title), widget (QGroupBox, groupBox_3)
 #: plugins/stats/DisplaySettings.ui:904
 #, kde-format
 msgid "Display"
 msgstr "顯示"
 
 #. i18n: ectx: property (text), widget (QCheckBox, kcfg_AntiAliasing)
 #: plugins/stats/DisplaySettings.ui:910
 #, kde-format
 msgid "Use anti-aliasing"
 msgstr "使用平滑字型"
 
 #. i18n: ectx: property (text), widget (QCheckBox, kcfg_DrawBgdGrid)
 #: plugins/stats/DisplaySettings.ui:920
 #, kde-format
 msgid "Draw background grid"
 msgstr "畫背景格線"
 
 #. i18n: ectx: property (text), widget (QLabel, label_18)
 #: plugins/stats/DisplaySettings.ui:932
 #, kde-format
 msgctxt "@label:listbox"
 msgid "Widget type:"
 msgstr "元件型態："
 
 #. i18n: ectx: property (text), item, widget (QComboBox, kcfg_WidgetType)
 #: plugins/stats/DisplaySettings.ui:940
 #, kde-format
 msgid "Native"
 msgstr "原始"
 
 #. i18n: ectx: property (text), item, widget (QComboBox, kcfg_WidgetType)
 #: plugins/stats/DisplaySettings.ui:945
 #, kde-format
 msgid "KDE"
 msgstr "KDE"
 
 #. i18n: ectx: property (text), widget (QLabel, label_33)
 #: plugins/stats/DisplaySettings.ui:953
 #, kde-format
 msgid "(plugin reload is needed after change)"
 msgstr "(作出更變後需重新載入外掛程式)"
 
 #: plugins/stats/DisplaySettingsPage.cc:29
 #, kde-format
 msgctxt "@title:window"
 msgid "Display"
 msgstr "顯示"
 
 #: plugins/stats/drawer/ChartDrawer.cc:29
 #, kde-format
 msgid "KiB/s"
 msgstr "KB/秒"
 
 #: plugins/stats/drawer/ChartDrawerData.cc:28
 #, kde-format
 msgid "Unknown"
 msgstr "未知"
 
 #: plugins/stats/drawer/KPlotWgtDrawer.cc:353
 #: plugins/stats/drawer/PlainChartDrawer.cc:545
 #, kde-format
 msgid ""
 "<h1 align='center' style='font-size: large; text-decoration: "
 "underline'>Legend:</h1><ul type='square'>"
 msgstr ""
 "<h1 align='center' style='font-size: large; text-decoration: underline'>圖"
 "例：</h1><ul type='square'>"
 
 #: plugins/stats/drawer/KPlotWgtDrawer.cc:357
 #: plugins/stats/drawer/PlainChartDrawer.cc:549
 #, kde-format
 msgid ""
 "<li><span style='background-color: %1; font-size: 14px; font-family: "
 "monospace'>&nbsp;&nbsp;</span>&nbsp;—&nbsp;%2</li>"
 msgstr ""
 "<li><span style='background-color: %1; font-size: 14px; font-family: "
 "monospace'>&nbsp;&nbsp;</span>&nbsp;—&nbsp;%2</li>"
 
 #: plugins/stats/drawer/KPlotWgtDrawer.cc:398
 #: plugins/stats/drawer/PlainChartDrawer.cc:340
 #, kde-format
 msgctxt "@action:inmenu"
 msgid "Save as image…"
 msgstr "儲存為影像..."
 
 #: plugins/stats/drawer/KPlotWgtDrawer.cc:402
 #: plugins/stats/drawer/PlainChartDrawer.cc:344
 #, kde-format
 msgctxt "@action:inmenu Recalculate the 0Y axis and then redraw the chart"
 msgid "Rescale"
 msgstr "重新掃描"
 
 #: plugins/stats/drawer/KPlotWgtDrawer.cc:406
 #: plugins/stats/drawer/PlainChartDrawer.cc:348
 #, kde-format
 msgctxt "@action:inmenu"
 msgid "Reset"
 msgstr "重置"
 
 #: plugins/stats/drawer/KPlotWgtDrawer.cc:418
 #: plugins/stats/drawer/PlainChartDrawer.cc:360
 #, kde-format
 msgid "Select path to save image…"
 msgstr "選擇要儲存影像的路徑..."
 
 #: plugins/stats/drawer/KPlotWgtDrawer.cc:418
 #: plugins/stats/drawer/PlainChartDrawer.cc:360
 #, kde-format
 msgid "Image files"
 msgstr "映像檔"
 
 #. i18n: ectx: label, entry (UpdateEveryGuiUpdates), group (general)
 #: plugins/stats/ktstatsplugin.kcfg:10
 #, kde-format
 msgid "Update charts every n gui updates"
 msgstr "每更新 n 次使用者介面時更新一次圖表"
 
 #. i18n: ectx: label, entry (DataGatherIval), group (general)
 #: plugins/stats/ktstatsplugin.kcfg:15
 #, kde-format
 msgid "Interval in milliseconds between data gathering"
 msgstr "資料收集間隔，以毫秒為單位"
 
 #. i18n: ectx: label, entry (MaxMode), group (general)
 #: plugins/stats/ktstatsplugin.kcfg:20
 #, kde-format
 msgid "Method of determining maximum value of the scale"
 msgstr "決定調整最大值的方法"
 
 #. i18n: ectx: label, entry (ShowSeedsInSwarms), group (general)
 #: plugins/stats/ktstatsplugin.kcfg:25
 #, kde-format
 msgid "Whether to show seeds in swarms"
 msgstr "是否顯示種子數"
 
 #. i18n: ectx: label, entry (ShowLeechersInSwarms), group (general)
 #: plugins/stats/ktstatsplugin.kcfg:30
 #, kde-format
 msgid "Whether to show leachers in swarms"
 msgstr "是否顯示接收者數"
 
 #. i18n: ectx: label, entry (DlSpdSamples), group (general)
 #: plugins/stats/ktstatsplugin.kcfg:35
 #, kde-format
 msgid "Samples to show on download chart"
 msgstr "下載圖表中顯示的樣本"
 
 #. i18n: ectx: label, entry (PeersSpdSamples), group (general)
 #: plugins/stats/ktstatsplugin.kcfg:40
 #, kde-format
 msgid "Samples to show on peers chart"
 msgstr "端點圖表中顯示的樣本"
 
 #. i18n: ectx: label, entry (UlSpdSamples), group (general)
 #: plugins/stats/ktstatsplugin.kcfg:45
 #, kde-format
 msgid "Samples to show on upload chart"
 msgstr "上傳圖表中顯示的樣本"
 
 #. i18n: ectx: label, entry (ConnsSamples), group (general)
 #: plugins/stats/ktstatsplugin.kcfg:50
 #, kde-format
 msgid "Samples to show on connections chart"
 msgstr "連線圖表中顯示的樣本"
 
 #. i18n: ectx: label, entry (DhtSpdSamples), group (general)
 #: plugins/stats/ktstatsplugin.kcfg:55
 #, kde-format
 msgid "Samples to show on DHT chart"
 msgstr "DHT 圖表中顯示的樣本"
 
 #. i18n: ectx: label, entry (DlSpdColor), group (general)
 #: plugins/stats/ktstatsplugin.kcfg:60
 #, kde-format
 msgid "Color of the speed on dl chart"
 msgstr "下載圖表中顯示的速度的顏色"
 
 #. i18n: ectx: label, entry (DlAvgColor), group (general)
 #: plugins/stats/ktstatsplugin.kcfg:65
 #, kde-format
 msgid "Color of the average on dl chart"
 msgstr "下載圖表中顯示的平均的顏色"
 
 #. i18n: ectx: label, entry (DlLimitColor), group (general)
 #: plugins/stats/ktstatsplugin.kcfg:70
 #, kde-format
 msgid "Color of the limit on dl chart"
 msgstr "下載圖表中顯示的限制的顏色"
 
 #. i18n: ectx: label, entry (PrAvgFromLColor), group (general)
 #: plugins/stats/ktstatsplugin.kcfg:75
 #, kde-format
 msgid "Color of the avg from leecher on peers chart"
 msgstr "端點圖表中顯示從接收者接收的平均的顏色"
 
 #. i18n: ectx: label, entry (PrAvgToLColor), group (general)
 #: plugins/stats/ktstatsplugin.kcfg:80
 #, kde-format
 msgid "Color of the avg to leecher on peers chart"
 msgstr "端點圖表中顯示傳送給接收者的平均的顏色"
 
 #. i18n: ectx: label, entry (PrAvgFromSColor), group (general)
 #: plugins/stats/ktstatsplugin.kcfg:85
 #, kde-format
 msgid "Color of the avg from seeds on peers chart"
 msgstr "端點圖表中顯示從種子端點接收的平均的顏色"
 
 #. i18n: ectx: label, entry (PrFromLColor), group (general)
 #: plugins/stats/ktstatsplugin.kcfg:90
 #, kde-format
 msgid "Color of the leechers on peers chart"
 msgstr "端點圖表中顯示接收者的顏色"
 
 #. i18n: ectx: label, entry (PrFromSColor), group (general)
 #: plugins/stats/ktstatsplugin.kcfg:95
 #, kde-format
 msgid "Color of the seeds on peers chart"
 msgstr "端點圖表中顯示種子端點的顏色"
 
 #. i18n: ectx: label, entry (UlSpdColor), group (general)
 #: plugins/stats/ktstatsplugin.kcfg:100
 #, kde-format
 msgid "Color of the speed on upload chart"
 msgstr "上傳圖表中顯示的速度的顏色"
 
 #. i18n: ectx: label, entry (UlAvgColor), group (general)
 #: plugins/stats/ktstatsplugin.kcfg:105
 #, kde-format
 msgid "Color of the avg on upload chart"
 msgstr "上傳圖表中顯示的平均的顏色"
 
 #. i18n: ectx: label, entry (UlLimitColor), group (general)
 #: plugins/stats/ktstatsplugin.kcfg:110
 #, kde-format
 msgid "Color of the limit on upload chart"
 msgstr "上傳圖表中顯示的限制的顏色"
 
 #. i18n: ectx: label, entry (CnLConnColor), group (general)
 #: plugins/stats/ktstatsplugin.kcfg:115
 #, kde-format
 msgid "Color of the connected leechers on connections chart"
 msgstr "連線圖表中顯示已連線接收者的顏色"
 
 #. i18n: ectx: label, entry (CnLSwarmsColor), group (general)
 #: plugins/stats/ktstatsplugin.kcfg:120
 #, kde-format
 msgid "Color of the leechers in swarms on connections chart"
 msgstr "連線圖表中顯示接收者的顏色"
 
 #. i18n: ectx: label, entry (CnSConnColor), group (general)
 #: plugins/stats/ktstatsplugin.kcfg:125
 #, kde-format
 msgid "Color of the connected seeds on connections chart"
 msgstr "連線圖表中顯示已連線種子的顏色"
 
 #. i18n: ectx: label, entry (CnSSwarmsColor), group (general)
 #: plugins/stats/ktstatsplugin.kcfg:130
 #, kde-format
 msgid "Color of the seeds in swarms on connections chart"
 msgstr "連線圖表中顯示種子的顏色"
 
 #. i18n: ectx: label, entry (CnAvgLConnPerTorrColor), group (general)
 #: plugins/stats/ktstatsplugin.kcfg:135
 #, kde-format
 msgid "Color of the avg connected leecher per torrent on connections chart"
 msgstr "連線圖表中每個 torrent 的連線接收者的平均的顏色"
 
 #. i18n: ectx: label, entry (CnAvgSConnPerTorrColor), group (general)
 #: plugins/stats/ktstatsplugin.kcfg:140
 #, kde-format
 msgid "Color of the avg connected seeds per torrent on connections chart"
 msgstr "連線圖表中每個 torrent 的連線種子的平均的顏色"
 
 #. i18n: ectx: label, entry (CnAvgLConnPerRunTorrColor), group (general)
 #: plugins/stats/ktstatsplugin.kcfg:145
 #, kde-format
 msgid ""
 "Color of the avg connected leechers per running torrent on connections chart"
 msgstr "連線圖表中每個執行中 torrent 的連線接收者的平均的顏色"
 
 #. i18n: ectx: label, entry (CnAvgSConnPerRunTorrColor), group (general)
 #: plugins/stats/ktstatsplugin.kcfg:150
 #, kde-format
 msgid ""
 "Color of the avg connected seeds per running torrent on connections chart"
 msgstr "連線圖表中每個執行中 torrent 的連線種子的平均的顏色"
 
 #. i18n: ectx: label, entry (DhtNodesColor), group (general)
 #: plugins/stats/ktstatsplugin.kcfg:155
 #, kde-format
 msgid "Color of the nodes on DHT chart"
 msgstr "DHT 圖表中的節點的顏色"
 
 #. i18n: ectx: label, entry (DhtTasksColor), group (general)
 #: plugins/stats/ktstatsplugin.kcfg:160
 #, kde-format
 msgid "Color of the tasks on DHT chart"
 msgstr "DHT 圖表中的工作的顏色"
 
 #. i18n: ectx: label, entry (AntiAliasing), group (general)
 #: plugins/stats/ktstatsplugin.kcfg:165
 #, kde-format
 msgid "Use anti aliasing on charts?"
 msgstr "要在圖表中使用使用平滑字型嗎？"
 
 #. i18n: ectx: label, entry (DrawBgdGrid), group (general)
 #: plugins/stats/ktstatsplugin.kcfg:170
 #, kde-format
 msgid "Draw ugly grey background grid?"
 msgstr "要畫醜醜的灰色背景格線嗎？"
 
 #. i18n: ectx: label, entry (WidgetType), group (general)
 #: plugins/stats/ktstatsplugin.kcfg:175
 #, kde-format
 msgid "Type of widget used for chart drawing"
 msgstr "繪製圖表使用的元件"
 
 #. i18n: ectx: property (title), widget (QGroupBox, UpdateGbw)
 #: plugins/stats/Settings.ui:19
 #, kde-format
 msgctxt "@title:group"
 msgid "Update"
 msgstr "更新"
 
 #. i18n: ectx: property (text), widget (QLabel, label)
 #: plugins/stats/Settings.ui:25
 #, kde-format
 msgctxt "Continues with: [number field] GUI updates"
 msgid "Update charts every"
 msgstr "每次更新圖表間隔"
 
 #. i18n: ectx: property (text), widget (QLabel, label_2)
 #: plugins/stats/Settings.ui:50
 #, kde-format
 msgctxt "Continuation of: Update charts every [number field]"
 msgid "GUI updates"
 msgstr "使用者介面更新"
 
 #. i18n: ectx: property (text), widget (QLabel, label_3)
 #: plugins/stats/Settings.ui:69
 #, kde-format
 msgctxt "Continues with: [number field] milliseconds"
 msgid "Gather data every"
 msgstr "每次收集資料間隔"
 
 #. i18n: ectx: property (text), widget (QLabel, label_4)
 #: plugins/stats/Settings.ui:95
 #, kde-format
 msgctxt "Continuation of: Gather data every [number field]"
 msgid "milliseconds"
 msgstr "毫秒"
 
 #. i18n: The maximums of 0X axes on charts
 #. i18n: ectx: property (title), widget (QGroupBox, groupBox)
 #: plugins/stats/Settings.ui:108
 #, kde-format
 msgid "Measurements counts"
 msgstr "測量計數"
 
 #. i18n: ectx: property (title), widget (QGroupBox, MaxModeGbw)
 #: plugins/stats/Settings.ui:247
 #, kde-format
 msgid "Maximum"
 msgstr "最大"
 
 #. i18n: The way the maximum of 0Y axis is calculated
 #. i18n: ectx: property (text), widget (QLabel, label_5)
 #: plugins/stats/Settings.ui:255
 #, kde-format
 msgctxt "@label:listbox"
 msgid "Maximum speed scale mode: "
 msgstr "最大速度調整模式："
 
 #. i18n: ectx: property (text), item, widget (QComboBox, kcfg_MaxMode)
 #: plugins/stats/Settings.ui:272
 #, kde-format
 msgid "Maximum ever achieved"
 msgstr "已歸檔最大值"
 
 #. i18n: ectx: property (text), item, widget (QComboBox, kcfg_MaxMode)
 #: plugins/stats/Settings.ui:277
 #, kde-format
 msgid "Maximum visible on chart"
 msgstr "圖表上可見最大值"
 
 #. i18n: ectx: property (title), widget (QGroupBox, groupBox_2)
 #: plugins/stats/Settings.ui:290
 #, kde-format
 msgctxt "@title:group"
 msgid "Peers connections"
 msgstr "端點連線"
 
 #. i18n: ectx: property (text), widget (QCheckBox, kcfg_ShowSeedsInSwarms)
 #: plugins/stats/Settings.ui:296
 #, kde-format
 msgid "Show seeds in swarms"
 msgstr "顯示種子數"
 
 #. i18n: ectx: property (text), widget (QCheckBox, kcfg_ShowLeechersInSwarms)
 #: plugins/stats/Settings.ui:303
 #, kde-format
 msgid "Show leechers in swarms"
 msgstr "顯示接收者數"
 
 #: plugins/stats/SettingsPage.cc:27
 #, kde-format
 msgctxt "@title:window"
 msgid "Statistics"
 msgstr "統計"
 
 #: plugins/stats/SettingsPage.cc:46
 #, kde-format
 msgid "(= %1 ms)"
 msgstr "（= %1 毫秒）"
 
 #. i18n: ectx: property (windowTitle), widget (QWidget, SpdWgt)
 #: plugins/stats/Spd.ui:13
 #, kde-format
 msgctxt "@title:window"
 msgid "Speed"
 msgstr "速度"
 
 #: plugins/stats/SpdTabPage.cc:70
 #, kde-format
 msgctxt "Name of a line on download chart"
 msgid "Average speed"
 msgstr "平均速度"
 
 #: plugins/stats/SpdTabPage.cc:71
 #, kde-format
 msgctxt "Name of a line on upload chart"
 msgid "Average speed"
 msgstr "平均速度"
 
 #: plugins/stats/SpdTabPage.cc:73
 #, kde-format
 msgctxt "Name of a line on download chart"
 msgid "Speed limit"
 msgstr "速度限制"
 
 #: plugins/stats/SpdTabPage.cc:74
 #, kde-format
 msgctxt "Name of a line on upload chart"
 msgid "Speed limit"
 msgstr "速度限制"
 
 #: plugins/stats/StatsPlugin.cc:48
 #, kde-format
 msgid "Speed charts"
 msgstr "速度圖表"
 
 #: plugins/stats/StatsPlugin.cc:48
 #, kde-format
 msgid "Displays charts about download and upload speed"
 msgstr "顯示下載與上傳速度的圖表"
 
 #: plugins/stats/StatsPlugin.cc:49
 #, kde-format
 msgid "Connections charts"
 msgstr "連線圖表"
 
 #: plugins/stats/StatsPlugin.cc:49
 #, kde-format
 msgid "Displays charts about connections"
 msgstr "顯示關於連線的圖表"
 
 #: plugins/syndication/feedlist.cpp:177
 #, kde-format
 msgid ""
 "%2\n"
 "1 active filter"
 msgid_plural ""
 "%2\n"
 "%1 active filters"
 msgstr[0] ""
 "%2\n"
 "%1 個作用中的過濾器"
 
 #: plugins/syndication/feedlist.cpp:185
 #, kde-format
 msgid "<b>%1</b><br/><br/>Download failed: <b>%2</b>"
 msgstr "<b>%1</b><br/><br/>下載失敗：<b>%2</b>"
 
 #: plugins/syndication/feedwidget.cpp:43
 #, kde-format
 msgid ""
 "    <html>    <body style=\"color:%4\">    <div style=\"border-style:solid; "
 "border-width:1px; border-color:%4; margin:5px; padding:5px\">    <b>Title:</"
 "b> %1<br/>    <b>Date:</b> %2<br/>    </div>    <p>%3</p>    </body>    </"
 "html>    "
 msgstr ""
 "    <html>    <body style=\"color:%4\">    <div style=\"border-style:solid; "
 "border-width:1px; border-color:%4; margin:5px; padding:5px\">    <b>標題：</"
 "b> %1<br/>    <b>日期：</b> %2<br/>    </div>    <p>%3</p>    </body>    </"
 "html>    "
 
 #: plugins/syndication/feedwidget.cpp:198
 #, kde-format
 msgid "Authentication Cookie"
 msgstr "認證 Cookie"
 
 #: plugins/syndication/feedwidget.cpp:198
 #, kde-format
 msgid "Enter the new authentication cookie"
 msgstr "輸入新的認證 Cookie"
 
 #: plugins/syndication/feedwidget.cpp:234
 #, kde-format
 msgid "<b>OK</b>"
 msgstr "<b>確定</b>"
 
 #: plugins/syndication/feedwidget.cpp:237
 #, kde-format
 msgid "<b>Not Loaded</b>"
 msgstr "<b>未載入</b>"
 
 #: plugins/syndication/feedwidget.cpp:240
 #, kde-format
 msgid "<b>Download Failed: %1</b>"
 msgstr "<b>下載失敗：%1</b>"
 
 #: plugins/syndication/feedwidget.cpp:243
 #, kde-format
 msgid "<b>Downloading</b>"
 msgstr "<b>下載中</b>"
 
 #. i18n: ectx: property (text), widget (QLabel, label_2)
 #: plugins/syndication/feedwidget.ui:65
 #, kde-format
 msgid "Status:"
 msgstr "狀態："
 
 #. i18n: ectx: property (text), widget (QLabel, label_4)
 #: plugins/syndication/feedwidget.ui:85
 #, kde-format
 msgid "Active Filters:"
 msgstr "動作中的過濾器："
 
 #. i18n: ectx: property (text), widget (QLabel, label_3)
 #: plugins/syndication/feedwidget.ui:131
 #, kde-format
 msgid "Refresh every:"
 msgstr "刷新間隔："
 
 #. i18n: ectx: property (toolTip), widget (QSpinBox, m_refresh_rate)
 #: plugins/syndication/feedwidget.ui:138
 #, kde-format
 msgid "Time between automatic refreshes of the feed."
 msgstr "自動刷新 feed 的間隔時間。"
 
 #. i18n: ectx: property (text), widget (QPushButton, m_cookies)
 #: plugins/syndication/feedwidget.ui:170
 #, kde-format
 msgid "Cookies"
 msgstr "Cookies"
 
 #. i18n: ectx: property (text), widget (QPushButton, m_filters)
 #: plugins/syndication/feedwidget.ui:177
 #, kde-format
 msgid "Filters"
 msgstr "過濾器"
 
 #: plugins/syndication/feedwidgetmodel.cpp:94
 #, kde-format
 msgid "Date Published"
 msgstr "發布日期"
 
 #: plugins/syndication/filtereditor.cpp:50
 #: plugins/syndication/syndicationplugin.cpp:104
 #, kde-format
 msgid "Edit Filter"
 msgstr "編輯過濾器"
 
 #: plugins/syndication/filtereditor.cpp:250
 #, kde-format
 msgid "There already is a filter named %1, filter names must be unique."
 msgstr "已經有名為 <b>%1</b> 的過濾器了。過濾器名稱不能重複。"
 
 #. i18n: ectx: property (text), widget (QLabel, label)
 #: plugins/syndication/filtereditor.ui:22
 #, kde-format
 msgid "Name:"
 msgstr "名稱："
 
 #. i18n: ectx: attribute (title), widget (QWidget, tab)
 #: plugins/syndication/filtereditor.ui:38
 #, kde-format
 msgid "String Matching"
 msgstr "字串比對"
 
 #. i18n: ectx: property (toolTip), widget (KEditListWidget, m_word_matches)
 #. i18n: ectx: property (toolTip), widget (KEditListWidget, m_exclusion_patterns)
 #: plugins/syndication/filtereditor.ui:68
 #: plugins/syndication/filtereditor.ui:133
 #, kde-format
 msgid ""
 "<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-"
 "right:0px; -qt-block-indent:0; text-indent:0px;\">The string to find in the "
 "title of an item. Simple wildcard syntax is supported :</p>\n"
 "<p style=\"-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; "
 "margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"></"
 "p>\n"
 "<p style=\"-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; "
 "margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"></"
 "p>\n"
 "<table border=\"0\" style=\" margin-top:0px; margin-bottom:0px; margin-"
 "left:0px; margin-right:0px;\" align=\"center\" cellspacing=\"1\" cellpadding="
 "\"2\">\n"
 "<tr>\n"
 "<td style=\" vertical-align:top;\">\n"
 "<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-"
 "right:0px; -qt-block-indent:0; text-indent:0px; color:#000000;\"><span style="
 "\" font-weight:600;\">c</span></p></td>\n"
 "<td style=\" vertical-align:top;\">\n"
 "<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-"
 "right:0px; -qt-block-indent:0; text-indent:0px;\">Any character represents "
 "itself apart from those mentioned below. Thus <span style=\" font-weight:600;"
 "\">c</span> matches the character <span style=\" font-style:italic;\">c</"
 "span>.</p></td></tr>\n"
 "<tr>\n"
 "<td style=\" vertical-align:top;\">\n"
 "<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-"
 "right:0px; -qt-block-indent:0; text-indent:0px; color:#000000;\"><span style="
 "\" font-weight:600;\">?</span></p></td>\n"
 "<td style=\" vertical-align:top;\">\n"
 "<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-"
 "right:0px; -qt-block-indent:0; text-indent:0px; color:#000000;\">Matches any "
 "single character. </p></td></tr>\n"
 "<tr>\n"
 "<td style=\" vertical-align:top;\">\n"
 "<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-"
 "right:0px; -qt-block-indent:0; text-indent:0px; color:#000000;\"><span style="
 "\" font-weight:600;\">*</span></p></td>\n"
 "<td style=\" vertical-align:top;\">\n"
 "<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-"
 "right:0px; -qt-block-indent:0; text-indent:0px; color:#000000;\">Matches "
 "zero or more of any characters.</p></td></tr>\n"
 "<tr>\n"
 "<td style=\" vertical-align:top;\">\n"
 "<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-"
 "right:0px; -qt-block-indent:0; text-indent:0px; color:#000000;\"><span style="
 "\" font-weight:600;\">[...]</span></p></td>\n"
 "<td style=\" vertical-align:top;\">\n"
 "<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-"
 "right:0px; -qt-block-indent:0; text-indent:0px; color:#000000;\">Sets of "
 "characters can be represented in square brackets. Within the character "
 "class, like outside, backslash has no special meaning.</p></td></tr></"
 "table>\n"
 "<p style=\" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-"
 "right:0px; -qt-block-indent:0; text-indent:0px; color:#000000;\">For example "
 "the *.torrent will match any item which ends in .torrent. </p>"
 msgstr ""
 "<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-"
 "right:0px; -qt-block-indent:0; text-indent:0px;\">用於在項目標題中尋找的字"
 "串。可以用簡單的萬用字元：</p>\n"
 "<p style=\"-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; "
 "margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"></"
 "p>\n"
 "<p style=\"-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; "
 "margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"></"
 "p>\n"
 "<table border=\"0\" style=\" margin-top:0px; margin-bottom:0px; margin-"
 "left:0px; margin-right:0px;\" align=\"center\" cellspacing=\"1\" cellpadding="
 "\"2\">\n"
 "<tr>\n"
 "<td style=\" vertical-align:top;\">\n"
 "<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-"
 "right:0px; -qt-block-indent:0; text-indent:0px; color:#000000;\"><span style="
 "\" font-weight:600;\">c</span></p></td>\n"
 "<td style=\" vertical-align:top;\">\n"
 "<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-"
 "right:0px; -qt-block-indent:0; text-indent:0px;\">任何字元都代表自身。因此 "
 "<span style=\" font-weight:600;\">c</span> 就表示字元 <span style=\" font-"
 "style:italic;\">c</span>。</p></td></tr>\n"
 "<tr>\n"
 "<td style=\" vertical-align:top;\">\n"
 "<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-"
 "right:0px; -qt-block-indent:0; text-indent:0px; color:#000000;\"><span style="
 "\" font-weight:600;\">?</span></p></td>\n"
 "<td style=\" vertical-align:top;\">\n"
 "<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-"
 "right:0px; -qt-block-indent:0; text-indent:0px; color:#000000;\">表示任何單一"
 "字元。</p></td></tr>\n"
 "<tr>\n"
 "<td style=\" vertical-align:top;\">\n"
 "<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-"
 "right:0px; -qt-block-indent:0; text-indent:0px; color:#000000;\"><span style="
 "\" font-weight:600;\">*</span></p></td>\n"
 "<td style=\" vertical-align:top;\">\n"
 "<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-"
 "right:0px; -qt-block-indent:0; text-indent:0px; color:#000000;\">表示任意長度"
 "的任何字元。</p></td></tr>\n"
 "<tr>\n"
 "<td style=\" vertical-align:top;\">\n"
 "<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-"
 "right:0px; -qt-block-indent:0; text-indent:0px; color:#000000;\"><span style="
 "\" font-weight:600;\">[...]</span></p></td>\n"
 "<td style=\" vertical-align:top;\">\n"
 "<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-"
 "right:0px; -qt-block-indent:0; text-indent:0px; color:#000000;\">字元集。表示"
 "在方括號裡的字元之一。在方括號裡，反斜線沒有特殊的意義。</p></td></tr></"
 "table>\n"
 "<p style=\" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-"
 "right:0px; -qt-block-indent:0; text-indent:0px; color:#000000;\">例如：*."
 "torrent 表示以 .torrent 的任何項目。</p>"
 
 #. i18n: ectx: property (toolTip), widget (QCheckBox, m_reg_exp_syntax)
 #. i18n: ectx: property (toolTip), widget (QCheckBox, m_exclusion_reg_exp)
 #: plugins/syndication/filtereditor.ui:78
 #: plugins/syndication/filtereditor.ui:143
 #, kde-format
 msgid ""
 "By default strings will use wildcard matching. If you want to use regular "
 "expressions, this needs to be enabled."
-msgstr ""
-"預設會使用萬用字元的方式來比對。若您要使用正則表達式，則需要開啟此選項。"
+msgstr "預設會使用萬用字元的方式來比對。若您要使用正則表達式，則需要開啟此選項。"
 
 #. i18n: ectx: property (text), widget (QCheckBox, m_reg_exp_syntax)
 #. i18n: ectx: property (text), widget (QCheckBox, m_exclusion_reg_exp)
 #: plugins/syndication/filtereditor.ui:81
 #: plugins/syndication/filtereditor.ui:146
 #, kde-format
 msgid "Strings are regular expressions"
 msgstr "使用正則表達式"
 
 #. i18n: ectx: property (text), widget (QCheckBox, m_all_words_must_match)
 #: plugins/syndication/filtereditor.ui:88
 #, kde-format
 msgid "Item must match all strings to be included"
 msgstr "必須符合所有字串才會引入"
 
 #. i18n: ectx: property (text), widget (QCheckBox, m_match_case_sensitive)
 #. i18n: ectx: property (text), widget (QCheckBox, m_exclusion_case_sensitive)
 #: plugins/syndication/filtereditor.ui:95
 #: plugins/syndication/filtereditor.ui:160
 #, kde-format
 msgid "Case sensitive matching"
 msgstr "區分大小寫"
 
 #. i18n: ectx: attribute (title), widget (QWidget, tab_5)
 #: plugins/syndication/filtereditor.ui:103
 #, kde-format
 msgid "Exclusion Patterns"
 msgstr "排除樣式"
 
 #. i18n: ectx: property (text), widget (QCheckBox, m_exclusion_all_must_match)
 #: plugins/syndication/filtereditor.ui:153
 #, kde-format
 msgid "Item must match all strings to be excluded"
 msgstr "必須符合所有字串才會被排除"
 
 #. i18n: ectx: attribute (title), widget (QWidget, tab_2)
 #: plugins/syndication/filtereditor.ui:168
 #, kde-format
 msgid "Seasons && Episodes"
 msgstr "季與集"
 
 #. i18n: ectx: property (text), widget (QCheckBox, m_use_se_matching)
 #: plugins/syndication/filtereditor.ui:174
 #, kde-format
 msgid "Use season and episode matching"
 msgstr "比對季與集"
 
 #. i18n: ectx: property (text), widget (QLabel, label_3)
 #: plugins/syndication/filtereditor.ui:183
 #, kde-format
 msgid "Seasons: "
 msgstr "季："
 
 #. i18n: ectx: property (toolTip), widget (QLineEdit, m_seasons)
 #: plugins/syndication/filtereditor.ui:194
 #, kde-format
 msgid ""
 "Specify the seasons to download, multiple seasons can be separated by a , "
 "and you can also use ranges by using a -\n"
 "\n"
 "For example: 1, 3-6, 9\n"
 "\n"
 "Will download seasons 1, 3, 4, 5, 6 and 9"
 msgstr ""
 "指定要下載哪幾季，可以用半形逗號區隔，以及用半形的 - 表示連續的範圍。\n"
 "
\n"
 "
例如：1,3-6,9\n"
 "
\n"
 "
可以下載第 1, 3, 4, 5, 6, 9  季"
 
 #. i18n: ectx: property (text), widget (QLabel, label_4)
 #: plugins/syndication/filtereditor.ui:201
 #, kde-format
 msgid "Episodes:"
 msgstr "集："
 
 #. i18n: ectx: property (toolTip), widget (QLineEdit, m_episodes)
 #: plugins/syndication/filtereditor.ui:212
 #, kde-format
 msgid ""
 "Specify the episodes to download, multiple episodes can be separated by a , "
 "and you can also use ranges by using a -\n"
 "\n"
 "For example: 1, 3-6, 9\n"
 "\n"
 "Will download episodes 1, 3, 4, 5, 6 and 9"
 msgstr ""
 "指定要下載哪幾集，可以用半形逗號區隔，以及用半形的 - 表示連續的範圍。\n"
 "
\n"
 "
例如：1,3-6,9\n"
 "
\n"
 "
可以下載第 1, 3, 4, 5, 6, 9  集"
 
 #. i18n: ectx: property (text), widget (QCheckBox, m_se_no_duplicates)
 #: plugins/syndication/filtereditor.ui:221
 #, kde-format
 msgid "Do not download multiple items with the same season and episode"
 msgstr "相同一季與相同一集的話，不要重複下載"
 
 #. i18n: ectx: property (text), widget (QCheckBox, m_download_matches)
 #: plugins/syndication/filtereditor.ui:248
 #, kde-format
 msgid "Download torrents of matching items"
 msgstr "下載比對符合的 torrents"
 
 #. i18n: ectx: property (text), widget (QCheckBox, m_download_non_matches)
 #: plugins/syndication/filtereditor.ui:255
 #, kde-format
 msgid "Download torrents of non matching items"
 msgstr "下載比對不符合的 torrents"
 
 #. i18n: ectx: property (text), widget (QCheckBox, m_add_to_group)
 #: plugins/syndication/filtereditor.ui:264
 #, kde-format
 msgid "Add to group:"
 msgstr "加入到群組："
 
 #. i18n: ectx: property (text), widget (QCheckBox, m_silently)
 #: plugins/syndication/filtereditor.ui:320
 #, kde-format
 msgid "Open torrents silently"
 msgstr "無聲地開啟 torrent 檔"
 
 #. i18n: ectx: attribute (title), widget (QWidget, tab_4)
 #. i18n: ectx: property (text), widget (QPushButton, m_test)
 #: plugins/syndication/filtereditor.ui:341
 #: plugins/syndication/filtereditor.ui:349
 #, kde-format
 msgid "Test"
 msgstr "測試"
 
 #. i18n: ectx: property (text), widget (QLabel, label_2)
 #: plugins/syndication/filtereditor.ui:356
 #, kde-format
 msgid "filter on feed:"
 msgstr "Feed 上的過濾器："
 
 #: plugins/syndication/ktfeed.cpp:485
 #, kde-format
 msgid "Aborted"
 msgstr "已中止"
 
 #: plugins/syndication/ktfeed.cpp:487
 #, kde-format
 msgid "Timeout when downloading feed"
 msgstr "下載 feed 時發生逾時"
 
 #: plugins/syndication/ktfeed.cpp:489
 #, kde-format
 msgid "Unknown hostname"
 msgstr "未知的主機"
 
 #: plugins/syndication/ktfeed.cpp:491
 #, kde-format
 msgid "File not found"
 msgstr "找不到檔案"
 
 #: plugins/syndication/ktfeed.cpp:493
 #, kde-format
 msgid "Unknown retriever error"
 msgstr "收取時發生未知的錯誤"
 
 #: plugins/syndication/ktfeed.cpp:497
 #, kde-format
 msgid "Invalid feed data"
 msgstr "不合法的 feed 資料"
 
 #: plugins/syndication/ktfeed.cpp:499
 #, kde-format
 msgid "Success"
 msgstr "成功"
 
 #. i18n: ectx: ToolBar (SyndicationToolBar)
 #: plugins/syndication/ktorrent_syndicationui.rc:4
 #, kde-format
 msgid "Syndication Toolbar"
 msgstr "Syndication 工具列"
 
 #: plugins/syndication/linkdownloader.cpp:203
 #, kde-format
 msgid "Could not find a valid link to a torrent on %1"
 msgstr "在 %1 找不到 torrent 的合法連結"
 
 #: plugins/syndication/managefiltersdlg.cpp:39
 #: plugins/syndication/syndicationplugin.cpp:92
 #, kde-format
 msgid "Add/Remove Filters"
 msgstr "新增/移除過濾器"
 
 #: plugins/syndication/managefiltersdlg.cpp:52
 #, kde-format
 msgid "Feed: <b>%1</b>"
 msgstr "Feed：<b>%1</b>"
 
 #. i18n: ectx: property (windowTitle), widget (QWidget, ManageFiltersDlg)
 #: plugins/syndication/managefiltersdlg.ui:13
 #, kde-format
 msgid "Manage Filters"
 msgstr "管理過濾器"
 
 #. i18n: ectx: property (text), widget (QLabel, m_feed_text)
 #: plugins/syndication/managefiltersdlg.ui:22
 #, kde-format
 msgid "Feed:"
 msgstr "Feed："
 
 #. i18n: ectx: property (text), widget (QLabel, label)
 #: plugins/syndication/managefiltersdlg.ui:33
 #, kde-format
 msgid "Active filters:"
 msgstr "動作中的過濾器："
 
 #. i18n: ectx: property (text), widget (QLabel, label_2)
 #: plugins/syndication/managefiltersdlg.ui:91
 #, kde-format
 msgid "Available filters:"
 msgstr "可用的過濾器："
 
 #. i18n: ectx: property (text), widget (QPushButton, m_remove_all)
 #: plugins/syndication/managefiltersdlg.ui:107
 #, kde-format
 msgid "Remove All"
 msgstr "全部移除"
 
 #. i18n: ectx: property (text), widget (QPushButton, m_new_filter)
 #: plugins/syndication/managefiltersdlg.ui:127
 #: plugins/syndication/syndicationactivity.cpp:217
 #, kde-format
 msgid "New Filter"
 msgstr "新增過濾器"
 
 #: plugins/syndication/syndicationactivity.cpp:55
 #: plugins/syndication/syndicationplugin.cpp:46
 #: plugins/syndication/syndicationplugin.cpp:51
 #, kde-format
 msgid "Syndication"
 msgstr "Syndication"
 
 #: plugins/syndication/syndicationactivity.cpp:61
 #, kde-format
 msgid "Manages RSS and Atom feeds"
 msgstr "管理 RSS 與 Atom feed"
 
 #: plugins/syndication/syndicationactivity.cpp:122
 #, kde-format
 msgid "Enter the URL"
 msgstr "輸入網址"
 
 #: plugins/syndication/syndicationactivity.cpp:123
 #, kde-format
 msgid "Please enter the URL of the RSS or Atom feed."
 msgstr "請輸入 RSS 或 Atom feed 的網址。"
 
 #: plugins/syndication/syndicationactivity.cpp:149
 #, kde-format
 msgid "Failed to load feed %1: %2"
 msgstr "載入 feed %1 時失敗：%2"
 
 #: plugins/syndication/syndicationactivity.cpp:165
 #, kde-format
 msgid "Failed to create directory for feed %1: %2"
 msgstr "無法為 feed %1 建立目錄：%2"
 
 #: plugins/syndication/syndicationactivity.cpp:219
 #, kde-format
 msgid "Add New Filter"
 msgstr "新增過濾器"
 
 #: plugins/syndication/syndicationplugin.cpp:86
 #, kde-format
 msgid "Add Feed"
 msgstr "新增 feed"
 
 #: plugins/syndication/syndicationplugin.cpp:89
 #, kde-format
 msgid "Remove Feed"
 msgstr "移除 Feed"
 
 #: plugins/syndication/syndicationplugin.cpp:95
 #, kde-format
 msgid "Rename"
 msgstr "重新命名"
 
 #: plugins/syndication/syndicationplugin.cpp:98
 #, kde-format
 msgid "Add Filter"
 msgstr "新增過濾器"
 
 #: plugins/syndication/syndicationplugin.cpp:101
 #, kde-format
 msgid "Remove Filter"
 msgstr "移除過濾器"
 
 #. i18n: ectx: label, entry (defaultDevice), group (general)
 #: plugins/upnp/ktupnpplugin.kcfg:10
 #, kde-format
 msgid "Default UPnP device to use"
 msgstr "預設使用的 UPnP 裝置"
 
 #: plugins/upnp/routermodel.cpp:74
 #, kde-format
 msgid "Device"
 msgstr "裝置"
 
 #: plugins/upnp/routermodel.cpp:75
 #, kde-format
 msgid "Ports Forwarded"
 msgstr "連接埠已轉送"
 
 #: plugins/upnp/routermodel.cpp:118
 #, kde-format
 msgid ""
 "Model Name: <b>%1</b><br/>Manufacturer: <b>%2</b><br/>Model Description: <b>"
 "%3</b><br/>"
-msgstr ""
-"模組名稱：<b>%1</b><br /> 製造商：<b>%2</b><br /> 模組描述：<b>%3</b><br />"
+msgstr "模組名稱：<b>%1</b><br /> 製造商：<b>%2</b><br /> 模組描述：<b>%3</b><br />"
 
 #. i18n: ectx: property (windowTitle), widget (QWidget, UPnPWidget)
 #: plugins/upnp/upnpplugin.cpp:56 plugins/upnp/upnpplugin.cpp:60
 #: plugins/upnp/upnpplugin.cpp:71 plugins/upnp/upnpwidget.ui:13
 #, kde-format
 msgid "UPnP"
 msgstr "UPnP"
 
 #: plugins/upnp/upnpplugin.cpp:61
 #, kde-format
 msgid "Shows the status of the UPnP plugin"
 msgstr "顯示 UPnP 外掛程式的狀態"
 
 #. i18n: ectx: property (text), widget (QPushButton, m_rescan)
 #: plugins/upnp/upnpwidget.ui:54
 #, kde-format
 msgid "Rescan"
 msgstr "重新掃描"
 
 #: plugins/webinterface/httpclienthandler.cpp:204
 #, kde-format
 msgid "An internal server error occurred: %1"
 msgstr "遇到內部伺服器錯誤：%1"
 
 #: plugins/webinterface/httpserver.cpp:334
 #, kde-format
 msgid "Cannot find web interface skins."
 msgstr "找不到網頁介面外觀。"
 
 #: plugins/webinterface/httpserver.cpp:499
 #, kde-format
 msgid "Unsupported HTTP method"
 msgstr "不支援的 HTTP 方法"
 
 #. i18n: ectx: label, entry (port), group (general)
 #: plugins/webinterface/ktwebinterfaceplugin.kcfg:10
 #, kde-format
 msgid "Port number"
 msgstr "連接埠號"
 
 #. i18n: ectx: label, entry (forward), group (general)
 #: plugins/webinterface/ktwebinterfaceplugin.kcfg:15
 #, kde-format
 msgid "forward Port"
 msgstr "轉送連接埠"
 
 #. i18n: ectx: label, entry (sessionTTL), group (general)
 #: plugins/webinterface/ktwebinterfaceplugin.kcfg:20
 #, kde-format
 msgid "Session time to live"
 msgstr "工作階段生命週期"
 
 #. i18n: ectx: label, entry (skin), group (general)
 #: plugins/webinterface/ktwebinterfaceplugin.kcfg:26
 #, kde-format
 msgid "interface skin"
 msgstr "網頁介面外觀"
 
 #. i18n: ectx: label, entry (username), group (general)
 #: plugins/webinterface/ktwebinterfaceplugin.kcfg:33
 #, kde-format
 msgid "username"
 msgstr "使用者名稱"
 
 #. i18n: ectx: label, entry (password), group (general)
 #: plugins/webinterface/ktwebinterfaceplugin.kcfg:37
 #, kde-format
 msgid "password"
 msgstr "密碼"
 
 #: plugins/webinterface/torrentposthandler.cpp:52
 #, kde-format
 msgid "HTTP Get not supported when uploading a torrent"
 msgstr "上傳 torrent 時不支援 HTTP Get "
 
 #: plugins/webinterface/torrentposthandler.cpp:65
 #, kde-format
 msgid "Invalid data received"
 msgstr "接收到不合法的資料"
 
 #: plugins/webinterface/torrentposthandler.cpp:77
 #, kde-format
 msgid "Failed to open temporary file"
 msgstr "開啟暫存檔失敗"
 
 #. i18n: ectx: property (title), widget (QGroupBox, groupBox_2)
 #: plugins/webinterface/webinterfaceplugin.cpp:56
 #: plugins/webinterface/webinterfaceplugin.cpp:66
 #: plugins/webinterface/webinterfaceprefwidget.cpp:39
 #: plugins/webinterface/webinterfaceprefwidget.ui:32
 #, kde-format
 msgid "Web Interface"
 msgstr "網頁介面"
 
 #. i18n: ectx: property (text), widget (QLabel, textLabel1_2)
 #: plugins/webinterface/webinterfaceprefwidget.ui:40
 #, kde-format
 msgid "Web interface skin:"
 msgstr "網頁介面外觀："
 
 #. i18n: ectx: property (toolTip), widget (QComboBox, kcfg_skin)
 #: plugins/webinterface/webinterfaceprefwidget.ui:62
 #, kde-format
 msgid "Which interface to use."
 msgstr "要使用哪個介面。"
 
 #. i18n: ectx: property (toolTip), widget (QCheckBox, kcfg_authentication)
 #: plugins/webinterface/webinterfaceprefwidget.ui:91
 #, kde-format
 msgid ""
 "If login required is enabled, you need to enter a username and a password.\n"
 "<p style=\"-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; "
 "margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"></"
 "p>\n"
 "<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-"
 "right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-"
 "weight:600;\">Attention: </span>You should not disable this when the "
 "webinterface is accessible from the internet. It will allow anybody access "
 "to it.</p>"
 msgstr ""
 "若開啟需要登入的功能，您就需要輸入使用者名稱與密碼。\n"
 "<p style=\"-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; "
 "margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"></"
 "p>\n"
 "<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-"
 "right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-"
 "weight:600;\">注意：</span>若您允許從網際網路上存取網頁介面，最好不要關閉此功"
 "能，否則任何人都能存取它。</p>"
 
 #. i18n: ectx: property (text), widget (QCheckBox, kcfg_authentication)
 #: plugins/webinterface/webinterfaceprefwidget.ui:94
 #, kde-format
 msgid "Login required"
 msgstr "需要登入"
 
 #. i18n: ectx: property (toolTip), widget (QLineEdit, kcfg_username)
 #: plugins/webinterface/webinterfaceprefwidget.ui:111
 #, kde-format
 msgid "Username you need to use in the login page of the webinterface."
 msgstr "網頁介面的登入頁使用的帳號名稱。"
 
 #. i18n: ectx: property (toolTip), widget (QLineEdit, kcfg_password)
 #: plugins/webinterface/webinterfaceprefwidget.ui:125
 #, kde-format
 msgid ""
 "The password for the webinterface login page. By default this is set to "
 "ktorrent."
 msgstr "網頁介面的登入頁使用的密碼。預設值為 \"ktorrent\"。"
 
 #. i18n: ectx: property (title), widget (QGroupBox, groupBox)
 #: plugins/webinterface/webinterfaceprefwidget.ui:140
 #, kde-format
 msgid "Web Server"
 msgstr "網頁伺服器"
 
 #. i18n: ectx: property (toolTip), widget (QSpinBox, kcfg_port)
 #: plugins/webinterface/webinterfaceprefwidget.ui:164
 #, kde-format
 msgid "The port the webinterface listens on."
 msgstr "網頁介面監聽的連接埠。"
 
 #. i18n: ectx: property (toolTip), widget (QCheckBox, kcfg_forward)
 #: plugins/webinterface/webinterfaceprefwidget.ui:188
 #, kde-format
 msgid ""
 "<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-"
 "right:0px; -qt-block-indent:0; text-indent:0px;\">If you are behind a router "
 "and you want to access the webinterface from somewhere on the Internet you "
 "need to forward the correct port.</p>\n"
 "<p style=\"-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; "
 "margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"></"
 "p>\n"
 "<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-"
 "right:0px; -qt-block-indent:0; text-indent:0px;\">This checkbox will ensure "
 "that the UPnP plugin automatically forwards the port. The UPnP plugin needs "
 "to be loaded for this to work.</p>"
 msgstr ""
 "<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-"
 "right:0px; -qt-block-indent:0; text-indent:0px;\">若是您在路由器之後，而您要"
 "從網際網路上的某處存取網頁介面，您必須要設定轉送連接埠。</p>\n"
 "<p style=\"-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; "
 "margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"></"
 "p>\n"
 "<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-"
 "right:0px; -qt-block-indent:0; text-indent:0px;\">這個勾選盒會確定 UPnP 外掛"
 "程式會自動轉送連接埠。當然您必須先載入 UPnP 的外掛程式。</p>"
 
 #. i18n: ectx: property (text), widget (QCheckBox, kcfg_forward)
 #: plugins/webinterface/webinterfaceprefwidget.ui:191
 #, kde-format
 msgid "Forward port"
 msgstr "轉送連接埠"
 
 #. i18n: ectx: property (text), widget (QLabel, textLabel4)
 #: plugins/webinterface/webinterfaceprefwidget.ui:198
 #, kde-format
 msgid "Session TTL:"
 msgstr "工作階段生命週期："
 
 #. i18n: ectx: property (toolTip), widget (QSpinBox, kcfg_sessionTTL)
 #: plugins/webinterface/webinterfaceprefwidget.ui:214
 #, kde-format
 msgid "How long a session is valid (in seconds)."
 msgstr "某工作階段的合法時間（秒）。"
 
 #. i18n: ectx: property (suffix), widget (QSpinBox, kcfg_sessionTTL)
 #: plugins/webinterface/webinterfaceprefwidget.ui:217
 #, kde-format
 msgid " secs"
 msgstr " 秒"
 
 #: plugins/zeroconf/zeroconfplugin.cpp:49
 #: plugins/zeroconf/zeroconfplugin.cpp:64
 #, kde-format
 msgid "ZeroConf"
 msgstr "Zeroconf"
 
 #~ msgid "Torrent filter"
 #~ msgstr "Torrent 過濾器"
Index: trunk/l10n-kf5/zh_TW/messages/frameworks/kio5.po
===================================================================
--- trunk/l10n-kf5/zh_TW/messages/frameworks/kio5.po	(revision 1537713)
+++ trunk/l10n-kf5/zh_TW/messages/frameworks/kio5.po	(revision 1537714)
@@ -1,8882 +1,8863 @@
 # translation of kcmkio.po to Chinese Traditional
 # traditional Chinese translation of kcmkio
 # Copyright (C) 2001-2002, 2003, 2007, 2008 Free Software Foundation, Inc.
 # Translator: Kenduest Lee <kenduest@i18n.linux.org.tw>, 2001.
 # Chao-Hsiung Liao <pesder.liao@msa.hinet.net>, 2002.
 # 林耕宇 <s9321028@ncnu.edu.tw>, 2003.
 # Frank Weng (a.k.a. Franklin) <franklin@mail.everfocus.com.tw>, 2007.
 # Franklin Weng <franklin@goodhorse.idv.tw>, 2010, 2011, 2012, 2015, 2017.
 # Jeff Huang <s8321414@gmail.com>, 2016, 2017, 2018.
 # pan93412 <pan93412@gmail.com>, 2018, 2019.
 # Franklin Weng <franklin at goodhorse dot idv dot tw>, 2007.
 # Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv dot tw>, 2008, 2009, 2010.
 msgid ""
 msgstr ""
 "Project-Id-Version: kcmkio\n"
 "Report-Msgid-Bugs-To: http://bugs.kde.org\n"
 "POT-Creation-Date: 2019-03-19 03:13+0100\n"
-"PO-Revision-Date: 2019-03-17 13:58+0800\n"
+"PO-Revision-Date: 2019-03-19 19:24+0800\n"
 "Last-Translator: pan93412 <pan93412@gmail.com>\n"
 "Language-Team: Chinese <zh-l10n@linux.org.tw>\n"
 "Language: zh_TW\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "X-Generator: Lokalize 18.12.3\n"
 "Plural-Forms: nplurals=1; plural=0;\n"
 
 #, kde-format
 msgctxt "NAME OF TRANSLATORS"
 msgid "Your names"
 msgstr "Kenduest Lee,Chao-Hsiung Liao,林耕宇, Jeff Huang"
 
 #, kde-format
 msgctxt "EMAIL OF TRANSLATORS"
 msgid "Your emails"
 msgstr ""
 "kenduest@i18n.linux.org.tw,pesder.liao@msa.hinet.net,s9321028@ncnu.edu.tw, "
 "s8321414@gmail.com*"
 
 #: core/chmodjob.cpp:206
 #, kde-format
 msgid "Could not modify the ownership of file %1"
 msgstr "無法變更檔案 %1 的擁有者。"
 
 #: core/chmodjob.cpp:208
 #, kde-format
 msgid ""
 "<qt>Could not modify the ownership of file <b>%1</b>. You have insufficient "
 "access to the file to perform the change.</qt>"
 msgstr ""
 "<qt>無法更改檔案 <b>%1</b> 的擁有權。您沒有足夠的檔案存取權來做這個改變。</"
 "qt>"
 
 #: core/connectionbackend.cpp:145
 #, kde-format
 msgid "Unable to create io-slave: %1"
 msgstr "無法建立 io-slave: %1"
 
 #: core/copyjob.cpp:1176 core/job_error.cpp:523
 #, kde-format
 msgid "Folder Already Exists"
 msgstr "資料夾已存在"
 
 #: core/copyjob.cpp:1450 core/copyjob.cpp:2036 core/filecopyjob.cpp:350
 #: core/job_error.cpp:513 widgets/paste.cpp:90
 #, kde-format
 msgid "File Already Exists"
 msgstr "檔案已存在"
 
 #: core/copyjob.cpp:1450 core/copyjob.cpp:2036
 #, kde-format
 msgid "Already Exists as Folder"
 msgstr "已存在以此為名的資料夾"
 
 #: core/copyjob.cpp:1577
 #, kde-format
 msgid "Trash"
 msgstr "垃圾桶"
 
 #: core/global.cpp:93
 #, kde-format
 msgid "1 day %2"
 msgid_plural "%1 days %2"
 msgstr[0] "%1 天 %2"
 
 #: core/global.cpp:128 core/global.cpp:145
 #, kde-format
 msgid "%1 Item"
 msgid_plural "%1 Items"
 msgstr[0] "%1 個項目"
 
 #: core/global.cpp:132
 #, kde-format
 msgid "1 Folder"
 msgid_plural "%1 Folders"
 msgstr[0] "%1 個資料夾"
 
 #: core/global.cpp:133
 #, kde-format
 msgid "1 File"
 msgid_plural "%1 Files"
 msgstr[0] "%1 個檔案"
 
 #: core/global.cpp:136
 #, kde-format
 msgctxt "folders, files (size)"
 msgid "%1, %2 (%3)"
 msgstr "%1，%2（%3）"
 
 #: core/global.cpp:137
 #, kde-format
 msgctxt "folders, files"
 msgid "%1, %2"
 msgstr "%1，%2"
 
 #: core/global.cpp:139
 #, kde-format
 msgctxt "files (size)"
 msgid "%1 (%2)"
 msgstr "%1（%2）"
 
 #: core/global.cpp:146
 #, kde-format
 msgctxt "items: folders, files (size)"
 msgid "%1: %2"
 msgstr "%1：%2"
 
 #: core/job.cpp:117
 #, kde-format
 msgctxt "@title job"
 msgid "Moving"
 msgstr "移動中"
 
 #: core/job.cpp:118 core/job.cpp:128 core/job.cpp:162
 #: widgets/fileundomanager.cpp:140
 #, kde-format
 msgctxt "The source of a file operation"
 msgid "Source"
 msgstr "來源"
 
 #: core/job.cpp:119 core/job.cpp:129 widgets/fileundomanager.cpp:141
 #, kde-format
 msgctxt "The destination of a file operation"
 msgid "Destination"
 msgstr "目的地"
 
 #: core/job.cpp:127
 #, kde-format
 msgctxt "@title job"
 msgid "Copying"
 msgstr "複製中"
 
 #: core/job.cpp:137
 #, kde-format
 msgctxt "@title job"
 msgid "Creating directory"
 msgstr "建立目錄"
 
 #: core/job.cpp:138 widgets/fileundomanager.cpp:135
 #, kde-format
 msgid "Directory"
 msgstr "目錄"
 
 #: core/job.cpp:145
 #, kde-format
 msgctxt "@title job"
 msgid "Deleting"
 msgstr "刪除中"
 
 #: core/job.cpp:146 core/job.cpp:154 widgets/fileundomanager.cpp:146
 #, kde-format
 msgid "File"
 msgstr "檔案"
 
 #: core/job.cpp:153
 #, kde-format
 msgctxt "@title job"
 msgid "Examining"
 msgstr "檢視中"
 
 #: core/job.cpp:161
 #, kde-format
 msgctxt "@title job"
 msgid "Transferring"
 msgstr "傳輸中"
 
 #: core/job.cpp:169
 #, kde-format
 msgctxt "@title job"
 msgid "Mounting"
 msgstr "掛載中"
 
 #: core/job.cpp:170
 #, kde-format
 msgid "Device"
 msgstr "裝置"
 
 #: core/job.cpp:171 core/job.cpp:177
 #, kde-format
 msgid "Mountpoint"
 msgstr "掛載點"
 
 #: core/job.cpp:176
 #, kde-format
 msgctxt "@title job"
 msgid "Unmounting"
 msgstr "卸載中"
 
 #: core/job.cpp:288
 #, kde-format
 msgid "Change Attribute"
 msgstr "變更屬性"
 
 #: core/job.cpp:289
 #, kde-format
 msgid ""
 "Root privileges are required to change file attributes. Do you want to "
 "continue?"
 msgstr "變更檔案屬性需要 root 權限。您想要繼續嗎？"
 
 #: core/job.cpp:293
 #, kde-format
 msgid "Copy Files"
 msgstr "複製檔案"
 
 #: core/job.cpp:294
 #, kde-format
 msgid ""
 "Root privileges are required to complete the copy operation. Do you want to "
 "continue?"
 msgstr "完成複製操作需要 root 權限。您想要繼續嗎？"
 
 #: core/job.cpp:298
 #, kde-format
 msgid "Delete Files"
 msgstr "刪除檔案"
 
 #: core/job.cpp:299
 #, kde-format
 msgid ""
 "Root privileges are required to complete the delete operation. However, "
 "doing so may damage your system. Do you want to continue?"
 msgstr "完成刪除操作需要 root 權限。不過，這可能會毀損您的系統。您想要繼續嗎？"
 
 #: core/job.cpp:303
 #, kde-format
 msgid "Create Folder"
 msgstr "建立資料夾"
 
 #: core/job.cpp:304
 #, kde-format
 msgid ""
 "Root privileges are required to create this folder. Do you want to continue?"
 msgstr "建立此資料夾需要 root 權限。您想要繼續嗎？"
 
 #: core/job.cpp:308
 #, kde-format
 msgid "Move Items"
 msgstr "移動項目"
 
 #: core/job.cpp:309
 #, kde-format
 msgid ""
 "Root privileges are required to complete the move operation. Do you want to "
 "continue?"
 msgstr "完成移動操作需要 root 權限。您想要繼續嗎？"
 
 #: core/job.cpp:313
 #, kde-format
 msgid "Rename"
 msgstr "重新命名"
 
 #: core/job.cpp:314
 #, kde-format
 msgid ""
 "Root privileges are required to complete renaming. Do you want to continue?"
 msgstr "完成重新命名需要 root 權限。您想要繼續嗎？"
 
 #: core/job.cpp:318 filewidgets/knewfilemenu.cpp:549
 #, kde-format
 msgid "Create Symlink"
 msgstr "建立符號連結"
 
 #: core/job.cpp:319
 #, kde-format
 msgid ""
 "Root privileges are required to create a symlink. Do you want to continue?"
 msgstr "建立符號連結需要 root 權限。您想要繼續嗎？"
 
 #: core/job.cpp:323
 #, kde-format
 msgid "Transfer data"
 msgstr "傳輸資料"
 
 #: core/job.cpp:324
 #, kde-format
 msgid ""
 "Root privileges are required to complete transferring data. Do you want to "
 "continue?"
 msgstr "完成傳輸資料需要 root 權限。您想要繼續嗎？"
 
 #: core/job_error.cpp:43
 #, kde-format
 msgid "Could not read %1."
 msgstr "無法讀取 %1。"
 
 #: core/job_error.cpp:46
 #, kde-format
 msgid "Could not write to %1."
 msgstr "無法寫入至 %1。"
 
 #: core/job_error.cpp:49
 #, kde-format
 msgid "Could not start process %1."
 msgstr "無法啟動程序 %1。"
 
 #: core/job_error.cpp:52
 #, kde-format
 msgid ""
 "Internal Error\n"
 "Please send a full bug report at http://bugs.kde.org\n"
 "%1"
 msgstr ""
 "內部錯誤\n"
 "請將完整的問題報告傳送到 http://bugs.kde.org\n"
 "%1"
 
 #: core/job_error.cpp:55
 #, kde-format
 msgid "Malformed URL %1."
 msgstr "不正確的 URL %1。"
 
 #: core/job_error.cpp:58
 #, kde-format
 msgid "The protocol %1 is not supported."
 msgstr "不支援 %1 通訊協定。"
 
 #: core/job_error.cpp:61
 #, kde-format
 msgid "The protocol %1 is only a filter protocol."
 msgstr "%1 只是一個過濾協定。"
 
 #: core/job_error.cpp:68
 #, kde-format
 msgid "%1 is a folder, but a file was expected."
 msgstr "%1 是一個資料夾，但現在需要的是檔案。"
 
 #: core/job_error.cpp:71
 #, kde-format
 msgid "%1 is a file, but a folder was expected."
 msgstr "%1 是一個檔案，但現在需要的是資料夾。"
 
 #: core/job_error.cpp:74
 #, kde-format
 msgid "The file or folder %1 does not exist."
 msgstr "檔案或資料夾 %1 不存在。"
 
 #: core/job_error.cpp:77
 #, kde-format
 msgid "A file named %1 already exists."
 msgstr "名為 %1 的檔案已經存在。"
 
 #: core/job_error.cpp:80
 #, kde-format
 msgid "A folder named %1 already exists."
 msgstr "名為 %1 的資料夾已經存在。"
 
 #: core/job_error.cpp:83
 #, kde-format
 msgid "No hostname specified."
 msgstr "沒有指定主機名稱。"
 
 #: core/job_error.cpp:83
 #, kde-format
 msgid "Unknown host %1"
 msgstr "不明的主機 %1"
 
 #: core/job_error.cpp:86
 #, kde-format
 msgid "Access denied to %1."
 msgstr "拒絕存取 %1。"
 
 #: core/job_error.cpp:89
 #, kde-format
 msgid ""
 "Access denied.\n"
 "Could not write to %1."
 msgstr ""
 "拒絕存取。\n"
 "無法寫入至 %1。"
 
 #: core/job_error.cpp:92
 #, kde-format
 msgid "Could not enter folder %1."
 msgstr "無法進入資料夾 %1。"
 
 #: core/job_error.cpp:95
 #, kde-format
 msgid "The protocol %1 does not implement a folder service."
 msgstr "協定 %1 並未實作資料夾服務。"
 
 #: core/job_error.cpp:98
 #, kde-format
 msgid "Found a cyclic link in %1."
 msgstr "在 %1 中發現一個循環連結。"
 
 #: core/job_error.cpp:104
 #, kde-format
 msgid "Found a cyclic link while copying %1."
 msgstr "在複製 %1 時發現一個循環連結。"
 
 #: core/job_error.cpp:107
 #, kde-format
 msgid "Could not create socket for accessing %1."
 msgstr "無法建立 socket 以存取 %1。"
 
 #: core/job_error.cpp:110
 #, kde-format
 msgid "Could not connect to host %1."
 msgstr "無法連線到主機 %1。"
 
 #: core/job_error.cpp:113
 #, kde-format
 msgid "Connection to host %1 is broken."
 msgstr "連線到主機 %1 失敗。"
 
 #: core/job_error.cpp:116
 #, kde-format
 msgid "The protocol %1 is not a filter protocol."
 msgstr "協定 %1 不是一個過濾協定。"
 
 #: core/job_error.cpp:119
 #, kde-format
 msgid ""
 "Could not mount device.\n"
 "The reported error was:\n"
 "%1"
 msgstr ""
 "無法裝載裝置。\n"
 "回應的錯誤為：\n"
 "%1"
 
 #: core/job_error.cpp:122
 #, kde-format
 msgid ""
 "Could not unmount device.\n"
 "The reported error was:\n"
 "%1"
 msgstr ""
 "無法卸載裝置。\n"
 "回應的錯誤為：\n"
 "%1"
 
 #: core/job_error.cpp:125
 #, kde-format
 msgid "Could not read file %1."
 msgstr "無法讀取檔案 %1。"
 
 #: core/job_error.cpp:128
 #, kde-format
 msgid "Could not write to file %1."
 msgstr "無法寫入檔案 %1。"
 
 #: core/job_error.cpp:131
 #, kde-format
 msgid "Could not bind %1."
 msgstr "無法 bind %1。"
 
 #: core/job_error.cpp:134
 #, kde-format
 msgid "Could not listen %1."
 msgstr "無法聽候 (listen) %1。"
 
 #: core/job_error.cpp:137
 #, kde-format
 msgid "Could not accept %1."
 msgstr "無法接受 (accept) %1。"
 
 #: core/job_error.cpp:143
 #, kde-format
 msgid "Could not access %1."
 msgstr "無法存取 %1。"
 
 #: core/job_error.cpp:146
 #, kde-format
 msgid "Could not terminate listing %1."
 msgstr "無法終結 %1 主機的 listen 呼叫。"
 
 #: core/job_error.cpp:149
 #, kde-format
 msgid "Could not make folder %1."
 msgstr "無法建立資料夾 %1。"
 
 #: core/job_error.cpp:152
 #, kde-format
 msgid "Could not remove folder %1."
 msgstr "無法移除資料夾 %1。"
 
 #: core/job_error.cpp:155
 #, kde-format
 msgid "Could not resume file %1."
 msgstr "無法恢復檔案 %1。"
 
 #: core/job_error.cpp:158
 #, kde-format
 msgid "Could not rename file %1."
 msgstr "無法重新命名檔案 %1。"
 
 #: core/job_error.cpp:161
 #, kde-format
 msgid "Could not change permissions for %1."
 msgstr "無法變更 %1 的權限。"
 
 #: core/job_error.cpp:164
 #, kde-format
 msgid "Could not change ownership for %1."
 msgstr "無法變更 %1 的權限。"
 
 #: core/job_error.cpp:167
 #, kde-format
 msgid "Could not delete file %1."
 msgstr "無法刪除檔案 %1。"
 
 #: core/job_error.cpp:170
 #, kde-format
 msgid "The process for the %1 protocol died unexpectedly."
 msgstr "%1 協定程式不預期的結束。"
 
 #: core/job_error.cpp:173
 #, kde-format
 msgid ""
 "Error. Out of memory.\n"
 "%1"
 msgstr ""
 "錯誤。記憶體不足。\n"
 "%1"
 
 #: core/job_error.cpp:176
 #, kde-format
 msgid ""
 "Unknown proxy host\n"
 "%1"
 msgstr ""
 "不明的代理伺服器主機\n"
 "%1"
 
 #: core/job_error.cpp:179
 #, kde-format
 msgid "Authorization failed, %1 authentication not supported"
 msgstr "授權失敗，%1 認證不支援"
 
 #: core/job_error.cpp:182
 #, kde-format
 msgid ""
 "User canceled action\n"
 "%1"
 msgstr ""
 "使用者取消的動作\n"
 "%1"
 
 #: core/job_error.cpp:185
 #, kde-format
 msgid ""
 "Internal error in server\n"
 "%1"
 msgstr "伺服器 %1 發生內部錯誤"
 
 #: core/job_error.cpp:188
 #, kde-format
 msgid ""
 "Timeout on server\n"
 "%1"
 msgstr "伺服器 %1 發生逾時"
 
 #: core/job_error.cpp:191
 #, kde-format
 msgid ""
 "Unknown error\n"
 "%1"
 msgstr ""
 "不明的錯誤\n"
 "%1"
 
 #: core/job_error.cpp:194
 #, kde-format
 msgid ""
 "Unknown interrupt\n"
 "%1"
 msgstr ""
 "不明的中斷\n"
 "%1"
 
 #: core/job_error.cpp:205
 #, kde-format
 msgid ""
 "Could not delete original file %1.\n"
 "Please check permissions."
 msgstr ""
 "無法刪除原始檔 %1。\n"
 "請確定權限。"
 
 #: core/job_error.cpp:208
 #, kde-format
 msgid ""
 "Could not delete partial file %1.\n"
 "Please check permissions."
 msgstr ""
 "無法刪除部分檔案 %1。\n"
 "請確定權限。"
 
 #: core/job_error.cpp:211
 #, kde-format
 msgid ""
 "Could not rename original file %1.\n"
 "Please check permissions."
 msgstr ""
 "無法重新命名原始檔 %1。\n"
 "請確定權限。"
 
 #: core/job_error.cpp:214
 #, kde-format
 msgid ""
 "Could not rename partial file %1.\n"
 "Please check permissions."
 msgstr ""
 "無法重新命名部分檔案 %1。\n"
 "請確定權限。"
 
 #: core/job_error.cpp:217
 #, kde-format
 msgid ""
 "Could not create symlink %1.\n"
 "Please check permissions."
 msgstr ""
 "無法建立符號連結 %1。\n"
 "請確定權限。"
 
 #: core/job_error.cpp:223
 #, kde-format
 msgid "There is not enough space on the disk to write %1."
 msgstr "硬碟上沒有足夠能用來寫入 %1 的空間。"
 
 #: core/job_error.cpp:226
 #, kde-format
 msgid ""
 "The source and destination are the same file.\n"
 "%1"
 msgstr ""
 "來源跟目標都是同一個檔案。\n"
 "%1"
 
 #: core/job_error.cpp:232
 #, kde-format
 msgid "%1 is required by the server, but is not available."
 msgstr "此伺服器要求 %1，但卻無法使用。"
 
 #: core/job_error.cpp:235
 #, kde-format
 msgid "Access to restricted port in POST denied."
 msgstr "對 POST 中限制的通訊埠存取被拒。"
 
 #: core/job_error.cpp:238
 #, kde-format
 msgid ""
 "The required content size information was not provided for a POST operation."
 msgstr "未提供 POST 操作所需要的內容大小資訊。"
 
 #: core/job_error.cpp:241
 #, kde-format
 msgid "A file or folder cannot be dropped onto itself"
 msgstr "資料夾無法放到它自己裡面"
 
 #: core/job_error.cpp:244
 #, kde-format
 msgid "A folder cannot be moved into itself"
 msgstr "資料夾無法移動到它自己裡面"
 
 #: core/job_error.cpp:247
 #, kde-format
 msgid "Communication with the local password server failed"
 msgstr "與本機密碼伺服器聯繫失敗"
 
 #: core/job_error.cpp:250
 #, kde-format
 msgid "Unable to create io-slave. %1"
 msgstr "無法建立 io-slave。%1"
 
 #: core/job_error.cpp:253
 #, kde-kuit-format
 msgctxt "@info"
 msgid ""
 "Cannot transfer <filename>%1</filename> because it is too large. The "
 "destination filesystem only supports files up to 4GiB"
 msgstr ""
 "因檔案過大導致無法傳輸 <filename>%1</filename>。目標檔案系統僅支援最大 4GiB "
 "的檔案"
 
 #: core/job_error.cpp:256
 #, kde-format
 msgid ""
 "Unknown error code %1\n"
 "%2\n"
 "Please send a full bug report at https://bugs.kde.org."
 msgstr ""
 "未知錯誤代碼 %1\n"
 "%2\n"
 "請將完整的問題報告傳送到 https://bugs.kde.org。"
 
 #: core/job_error.cpp:281
 #, kde-format
 msgctxt "@info url"
 msgid "(unknown)"
 msgstr "(不明)"
 
 #: core/job_error.cpp:288
 #, kde-format
 msgctxt "@info %1 error name, %2 description"
 msgid "<qt><p><b>%1</b></p><p>%2</p></qt>"
 msgstr "<qt><p><b>%1</b></p><p>%2</p></qt>"
 
 #: core/job_error.cpp:292
 #, kde-format
 msgid "<b>Technical reason</b>: "
 msgstr "<b>技術原因</b>："
 
 #: core/job_error.cpp:294
 #, kde-format
 msgid "<b>Details of the request</b>:"
 msgstr "<b>要求的細節</b>："
 
 #: core/job_error.cpp:295
 #, kde-format
 msgid "<li>URL: %1</li>"
 msgstr "<li>URL：%1</li>"
 
 #: core/job_error.cpp:297
 #, kde-format
 msgid "<li>Protocol: %1</li>"
 msgstr "<li>協定：%1</li>"
 
 #: core/job_error.cpp:299
 #, kde-format
 msgid "<li>Date and time: %1</li>"
 msgstr "<li>日期和時刻：%1</li>"
 
 #: core/job_error.cpp:300
 #, kde-format
 msgid "<li>Additional information: %1</li>"
 msgstr "<li>額外資訊：%1</li>"
 
 #: core/job_error.cpp:303
 #, kde-format
 msgid "<b>Possible causes</b>:"
 msgstr "<b>可能原因</b>："
 
 #: core/job_error.cpp:308
 #, kde-format
 msgid "<b>Possible solutions</b>:"
 msgstr "<b>可能的解決方法</b>："
 
 #: core/job_error.cpp:342
 #, kde-format
 msgctxt "@info protocol"
 msgid "(unknown)"
 msgstr "(不明)"
 
 #: core/job_error.cpp:351
 #, kde-format
 msgid ""
 "Contact your appropriate computer support system, whether the system "
 "administrator, or technical support group for further assistance."
-msgstr ""
-"請聯絡適合的電腦支援組織，例如系統管理員或技術支援小組，以取得進一步的協助。"
+msgstr "請聯絡適合的電腦支援組織，例如系統管理員或技術支援小組，以取得進一步的協助。"
 
 #: core/job_error.cpp:354
 #, kde-format
 msgid "Contact the administrator of the server for further assistance."
 msgstr "請聯繫伺服器的管理員，以取得進一步的協助。"
 
 #: core/job_error.cpp:357
 #, kde-format
 msgid "Check your access permissions on this resource."
 msgstr "請檢查您對該資源的存取權限。"
 
 #: core/job_error.cpp:358
 #, kde-format
 msgid ""
 "Your access permissions may be inadequate to perform the requested operation "
 "on this resource."
 msgstr "您可能沒有足夠權限來執行所要求的對該資源的作業。"
 
 #: core/job_error.cpp:360
 #, kde-format
 msgid ""
 "The file may be in use (and thus locked) by another user or application."
 msgstr "該檔案可能正在被其他使用者或應用程式使用 (所以被鎖定)。"
 
 #: core/job_error.cpp:362
 #, kde-format
 msgid ""
 "Check to make sure that no other application or user is using the file or "
 "has locked the file."
 msgstr "請檢查並確定沒有其他應用程式或使用者正在使用或鎖定該檔案。"
 
 #: core/job_error.cpp:364
 #, kde-format
 msgid "Although unlikely, a hardware error may have occurred."
 msgstr "雖然不太可能，但似乎出現了硬體錯誤。"
 
 #: core/job_error.cpp:366
 #, kde-format
 msgid "You may have encountered a bug in the program."
 msgstr "您可能遇到了程式中的錯誤。"
 
 #: core/job_error.cpp:367
 #, kde-format
 msgid ""
 "This is most likely to be caused by a bug in the program. Please consider "
 "submitting a full bug report as detailed below."
-msgstr ""
-"這最有可能是程式中的錯誤所導致。請考慮提交一份完整的錯誤報告，詳情如下。"
+msgstr "這最有可能是程式中的錯誤所導致。請考慮提交一份完整的錯誤報告，詳情如下。"
 
 #: core/job_error.cpp:369
 #, kde-format
 msgid ""
 "Update your software to the latest version. Your distribution should provide "
 "tools to update your software."
 msgstr "請將您的軟體更新至最新版本。您使用的散布版應該提供更新軟體的工具。"
 
 #: core/job_error.cpp:371
 #, kde-format
 msgid ""
 "When all else fails, please consider helping the KDE team or the third party "
 "maintainer of this software by submitting a high quality bug report. If the "
 "software is provided by a third party, please contact them directly. "
 "Otherwise, first look to see if the same bug has been submitted by someone "
 "else by searching at the <a href=\"http://bugs.kde.org/\">KDE bug reporting "
 "website</a>. If not, take note of the details given above, and include them "
 "in your bug report, along with as many other details as you think might help."
 msgstr ""
 "如果您多番嘗試後仍然無法解決問題，請考慮幫助 KDE 團隊或該軟體的第三方維護者，"
 "並提交一份高品質的錯誤報告。如果該軟體是由第三方提供的，請直接與他們聯繫。如"
 "果該軟體是 KDE 團隊提供的，請先在 <a href=\"http://bugs.kde.org/\">KDE 錯誤報"
 "告網站</a> 搜尋，看看是否已經有人報告了相同的錯誤。如果沒有，請把上面的詳細資"
 "訊，以及任何您認為有幫助的細節，附入您的錯誤報告中。"
 
 #: core/job_error.cpp:379
 #, kde-format
 msgid "There may have been a problem with your network connection."
 msgstr "您的網路連線可能有問題。"
 
 #: core/job_error.cpp:382
 #, kde-format
 msgid ""
 "There may have been a problem with your network configuration. If you have "
 "been accessing the Internet with no problems recently, this is unlikely."
-msgstr ""
-"您的網路設定可能有問題。如果您最近存取網際網路沒有問題，這就不太可能了。"
+msgstr "您的網路設定可能有問題。如果您最近存取網際網路沒有問題，這就不太可能了。"
 
 #: core/job_error.cpp:385
 #, kde-format
 msgid ""
 "There may have been a problem at some point along the network path between "
 "the server and this computer."
 msgstr "在網路中這部電腦和對方伺服器之間的路徑可能有問題。"
 
 #: core/job_error.cpp:387
 #, kde-format
 msgid "Try again, either now or at a later time."
 msgstr "請現在或稍後重試。"
 
 #: core/job_error.cpp:388
 #, kde-format
 msgid "A protocol error or incompatibility may have occurred."
 msgstr "可能出現了通訊協定錯誤或不相容。"
 
 #: core/job_error.cpp:389
 #, kde-format
 msgid "Ensure that the resource exists, and try again."
 msgstr "請確實該資源存在，然後再重試。"
 
 #: core/job_error.cpp:390
 #, kde-format
 msgid "The specified resource may not exist."
 msgstr "指定的資源並不存在。"
 
 #: core/job_error.cpp:391
 #, kde-format
 msgid "Double-check that you have entered the correct location and try again."
 msgstr "請再三檢查您輸入的位置正確，然後再重試。"
 
 #: core/job_error.cpp:393
 #, kde-format
 msgid "Check your network connection status."
 msgstr "請檢查您的網路連線狀態。"
 
 #: core/job_error.cpp:397
 #, kde-format
 msgid "Cannot Open Resource For Reading"
 msgstr "無法開啟資源進行讀取"
 
 #: core/job_error.cpp:398
 #, kde-format
 msgid ""
 "This means that the contents of the requested file or folder <strong>%1</"
 "strong> could not be retrieved, as read access could not be obtained."
 msgstr ""
 "這就是說，請求的檔案或資料夾 <strong>%1</strong> 的內容無法接收，因為無法取得"
 "讀入權限。"
 
 #: core/job_error.cpp:401
 #, kde-format
 msgid "You may not have permissions to read the file or open the folder."
 msgstr "您也許沒有讀取檔案或者是開啟資料夾。"
 
 #: core/job_error.cpp:407
 #, kde-format
 msgid "Cannot Open Resource For Writing"
 msgstr "無法開啟資源進行寫入"
 
 #: core/job_error.cpp:408
 #, kde-format
 msgid ""
 "This means that the file, <strong>%1</strong>, could not be written to as "
 "requested, because access with permission to write could not be obtained."
-msgstr ""
-"這就是說，該檔案 <strong>%1</strong> 無法按請求寫入，因為無法取得寫入權限。"
+msgstr "這就是說，該檔案 <strong>%1</strong> 無法按請求寫入，因為無法取得寫入權限。"
 
 #: core/job_error.cpp:416
 #, kde-format
 msgid "Cannot Launch Process required by the %1 Protocol"
 msgstr "無法啟動 %1 通訊協定所需的行程"
 
 #: core/job_error.cpp:417
 #, kde-format
 msgid "Unable to Launch Process"
 msgstr "無法啟動行程"
 
 #: core/job_error.cpp:418
 #, kde-format
 msgid ""
 "The program on your computer which provides access to the <strong>%1</"
 "strong> protocol could not be found or started. This is usually due to "
 "technical reasons."
 msgstr ""
 "在您的電腦上提供 <strong>%1</strong> 協定存取的程式找不到或無法啟動。這通常是"
 "由某些技術原因所致。"
 
 #: core/job_error.cpp:421
 #, kde-format
 msgid ""
 "The program which provides compatibility with this protocol may not have "
 "been updated with your last update of KDE. This can cause the program to be "
 "incompatible with the current version and thus not start."
 msgstr ""
 "提供此通訊協定的相容性的程式，可能並未與您的最新版 KDE 更新。這會造成該程式與"
 "目前版本不相容而無法啟動。"
 
 #: core/job_error.cpp:429
 #, kde-format
 msgid "Internal Error"
 msgstr "內部錯誤"
 
 #: core/job_error.cpp:430
 #, kde-format
 msgid ""
 "The program on your computer which provides access to the <strong>%1</"
 "strong> protocol has reported an internal error."
-msgstr ""
-"在您的電腦上提供 <strong>%1</strong> 協定存取的程式報告了一個內部錯誤。"
+msgstr "在您的電腦上提供 <strong>%1</strong> 協定存取的程式報告了一個內部錯誤。"
 
 #: core/job_error.cpp:438
 #, kde-format
 msgid "Improperly Formatted URL"
 msgstr "未正確格式化的 URL"
 
 #: core/job_error.cpp:439
 #, kde-format
 msgid ""
 "The <strong>U</strong>niform <strong>R</strong>esource <strong>L</"
 "strong>ocator (URL) that you entered was not properly formatted. The format "
 "of a URL is generally as follows:<blockquote><strong>protocol://user:"
 "password@www.example.org:port/folder/filename.extension?query=value</"
 "strong></blockquote>"
 msgstr ""
 "您所輸入的 URL (<strong>U</strong>niform <strong>R</strong>esource "
 "<strong>L</strong>ocator, 統一資源定位符) 格式有誤。一般 URL 的正確格式應該"
 "是：<blockquote><strong>protocol://使用者:密碼@www.example.org:埠號/資料夾/檔"
 "名.副檔名?查詢=值</strong></blockquote>"
 
 #: core/job_error.cpp:448
 #, kde-format
 msgid "Unsupported Protocol %1"
 msgstr "不支援的協定 %1"
 
 #: core/job_error.cpp:449
 #, kde-format
 msgid ""
 "The protocol <strong>%1</strong> is not supported by the KDE programs "
 "currently installed on this computer."
 msgstr "目前安裝在此電腦上的 KDE 程式不支援 <strong>%1</strong> 通訊協定。"
 
 #: core/job_error.cpp:452
 #, kde-format
 msgid "The requested protocol may not be supported."
 msgstr "不支援要求的通訊協定。"
 
 #: core/job_error.cpp:453
 #, kde-format
 msgid ""
 "The versions of the %1 protocol supported by this computer and the server "
 "may be incompatible."
 msgstr "此電腦支援的 %1 通訊協定的版本可能和伺服器的版本不相容。"
 
 #: core/job_error.cpp:455
 #, kde-format
 msgid ""
 "You may perform a search on the Internet for a KDE program (called a "
 "kioslave or ioslave) which supports this protocol. Places to search include "
 "<a href=\"http://kde-apps.org/\">http://kde-apps.org/</a> and <a href="
 "\"http://freshmeat.net/\">http://freshmeat.net/</a>."
 msgstr ""
 "您可以在網際網路上搜尋一個支援此通訊協定的 KDE 程式 (叫做 kioslave 或 "
 "ioslave)。建議從 <a href=\"http://kde-apps.org/\">http://kde-apps.org/</a> "
 "和 <a href=\"http://freshmeat.net/\">http://freshmeat.net/</a> 這兩個地方搜"
 "尋。"
 
 #: core/job_error.cpp:464
 #, kde-format
 msgid "URL Does Not Refer to a Resource."
 msgstr "URL 不是一個資源。"
 
 #: core/job_error.cpp:465
 #, kde-format
 msgid "Protocol is a Filter Protocol"
 msgstr "該協定是一個過濾協定"
 
 #: core/job_error.cpp:466
 #, kde-format
 msgid ""
 "The <strong>U</strong>niform <strong>R</strong>esource <strong>L</"
 "strong>ocator (URL) that you entered did not refer to a specific resource."
 msgstr ""
 "您輸入的 URL (<strong>U</strong>niform <strong>R</strong>esource <strong>L</"
 "strong>ocator, 統一資源定位符) 並不指向特定的資源。"
 
 #: core/job_error.cpp:469
 #, kde-format
 msgid ""
 "KDE is able to communicate through a protocol within a protocol; the "
 "protocol specified is only for use in such situations, however this is not "
 "one of these situations. This is a rare event, and is likely to indicate a "
 "programming error."
 msgstr ""
 "KDE 能夠在一個協定裡透過另一個協定進行通訊；指定的協定只適用於那種場合，現在"
 "卻不是那種場合。這個錯誤比較罕見，大概是編程出錯了。"
 
 #: core/job_error.cpp:477
 #, kde-format
 msgid "Unsupported Action: %1"
 msgstr "不支援的動作: %1"
 
 #: core/job_error.cpp:478
 #, kde-format
 msgid ""
 "The requested action is not supported by the KDE program which is "
 "implementing the <strong>%1</strong> protocol."
 msgstr "實作 <strong>%1</strong> 協定的 KDE 程式不支援要求的動作。"
 
 #: core/job_error.cpp:481
 #, kde-format
 msgid ""
 "This error is very much dependent on the KDE program. The additional "
 "information should give you more information than is available to the KDE "
 "input/output architecture."
 msgstr ""
 "這個錯誤非常關乎於個別的 KDE 程式。[額外資訊] 應該可以比 KDE 的輸入/輸出架構"
 "給您更多的資訊。"
 
 #: core/job_error.cpp:484
 #, kde-format
 msgid "Attempt to find another way to accomplish the same outcome."
 msgstr "請嘗試以其他的方法來達成相同的結果。"
 
 #: core/job_error.cpp:489
 #, kde-format
 msgid "File Expected"
 msgstr "需要檔案。"
 
 #: core/job_error.cpp:490
 #, kde-format
 msgid ""
 "The request expected a file, however the folder <strong>%1</strong> was "
 "found instead."
 msgstr "該要求需要一個檔案，然而找到的 <strong>%1</strong> 是一個資料夾。"
 
 #: core/job_error.cpp:492
 #, kde-format
 msgid "This may be an error on the server side."
 msgstr "這個可能是伺服器端的錯誤。"
 
 #: core/job_error.cpp:497
 #, kde-format
 msgid "Folder Expected"
 msgstr "需要資料夾"
 
 #: core/job_error.cpp:498
 #, kde-format
 msgid ""
 "The request expected a folder, however the file <strong>%1</strong> was "
 "found instead."
 msgstr "該要求需要一個資料夾，然而找到的 <strong>%1</strong> 是一個檔案。"
 
 #: core/job_error.cpp:505
 #, kde-format
 msgid "File or Folder Does Not Exist"
 msgstr "檔案或資料夾不存在"
 
 #: core/job_error.cpp:506
 #, kde-format
 msgid "The specified file or folder <strong>%1</strong> does not exist."
 msgstr "指定的檔案或資料夾 <strong>%1</strong> 不存在。"
 
 #: core/job_error.cpp:514
 #, kde-format
 msgid ""
 "The requested file could not be created because a file with the same name "
 "already exists."
 msgstr "無法建立要求的檔案，因為已經有另一個同名的檔案存在了。"
 
 #: core/job_error.cpp:516
 #, kde-format
 msgid "Try moving the current file out of the way first, and then try again."
 msgstr "請先把現有的檔案移開，再重試。"
 
 #: core/job_error.cpp:518
 #, kde-format
 msgid "Delete the current file and try again."
 msgstr "請先刪除現有的檔案，再重試。"
 
 #: core/job_error.cpp:519
 #, kde-format
 msgid "Choose an alternate filename for the new file."
 msgstr "請為新檔案選擇另一個檔名。"
 
 #: core/job_error.cpp:524
 #, kde-format
 msgid ""
 "The requested folder could not be created because a folder with the same "
 "name already exists."
 msgstr "無法建立要求的資料夾，因為已經有另一個同名的資料夾存在了。"
 
 #: core/job_error.cpp:526
 #, kde-format
 msgid "Try moving the current folder out of the way first, and then try again."
 msgstr "請先把現有的資料夾移開，再重試。"
 
 #: core/job_error.cpp:528
 #, kde-format
 msgid "Delete the current folder and try again."
 msgstr "請先刪除現有的資料夾，再重試。"
 
 #: core/job_error.cpp:529
 #, kde-format
 msgid "Choose an alternate name for the new folder."
 msgstr "請為新資料夾選擇另一個名稱。"
 
 #: core/job_error.cpp:533
 #, kde-format
 msgid "Unknown Host"
 msgstr "不明的主機"
 
 #: core/job_error.cpp:534
 #, kde-format
 msgid ""
 "An unknown host error indicates that the server with the requested name, "
 "<strong>%1</strong>, could not be located on the Internet."
 msgstr ""
 "「不明的主機」這個錯誤，表示在網際網路上找不到所要求的、名為 <strong>%1</"
 "strong> 的伺服器。"
 
 #: core/job_error.cpp:537
 #, kde-format
 msgid ""
 "The name that you typed, %1, may not exist: it may be incorrectly typed."
 msgstr "您鍵入的名稱「%1」可能不存在：可能打錯字了。"
 
 #: core/job_error.cpp:544
 #, kde-format
 msgid "Access Denied"
 msgstr "拒絕存取"
 
 #: core/job_error.cpp:545
 #, kde-format
 msgid "Access was denied to the specified resource, <strong>%1</strong>."
 msgstr "指定的資源 <strong>%1</strong> 拒絕存取。"
 
 #: core/job_error.cpp:547 core/job_error.cpp:773
 #, kde-format
 msgid "You may have supplied incorrect authentication details or none at all."
 msgstr "您可能提供了不正確的，或完全沒有提供認證細節。"
 
 #: core/job_error.cpp:549 core/job_error.cpp:775
 #, kde-format
 msgid "Your account may not have permission to access the specified resource."
 msgstr "您的帳號可能沒有權限存取指定的資源。"
 
 #: core/job_error.cpp:551 core/job_error.cpp:777 core/job_error.cpp:789
 #, kde-format
 msgid ""
 "Retry the request and ensure your authentication details are entered "
 "correctly."
 msgstr "請確定輸入正確的認證細節，再重試要求。"
 
 #: core/job_error.cpp:559
 #, kde-format
 msgid "Write Access Denied"
 msgstr "拒絕寫入存取"
 
 #: core/job_error.cpp:560
 #, kde-format
 msgid ""
 "This means that an attempt to write to the file <strong>%1</strong> was "
 "rejected."
 msgstr "這就是說，試圖寫入檔案 <strong>%1</strong> 時被拒絕了。"
 
 #: core/job_error.cpp:567
 #, kde-format
 msgid "Unable to Enter Folder"
 msgstr "無法進入資料夾"
 
 #: core/job_error.cpp:568
 #, kde-format
 msgid ""
 "This means that an attempt to enter (in other words, to open) the requested "
 "folder <strong>%1</strong> was rejected."
-msgstr ""
-"這就是說，試圖進入 (即開啟) 要求的資料夾 <strong>%1</strong> 時被拒絕了。"
+msgstr "這就是說，試圖進入 (即開啟) 要求的資料夾 <strong>%1</strong> 時被拒絕了。"
 
 #: core/job_error.cpp:576
 #, kde-format
 msgid "Folder Listing Unavailable"
 msgstr "無法取得資料夾列表"
 
 #: core/job_error.cpp:577
 #, kde-format
 msgid "Protocol %1 is not a Filesystem"
 msgstr "該協定 %1 不是一個檔案系統"
 
 #: core/job_error.cpp:578
 #, kde-format
 msgid ""
 "This means that a request was made which requires determining the contents "
 "of the folder, and the KDE program supporting this protocol is unable to do "
 "so."
 msgstr ""
 "這就是說，有個要求需要辨識該資料夾的內容，而支援這個協定的 KDE 程式卻無法這樣"
 "做。"
 
 #: core/job_error.cpp:586
 #, kde-format
 msgid "Cyclic Link Detected"
 msgstr "偵測到循環連結"
 
 #: core/job_error.cpp:587
 #, kde-format
 msgid ""
 "UNIX environments are commonly able to link a file or folder to a separate "
 "name and/or location. KDE detected a link or series of links that results in "
 "an infinite loop - i.e. the file was (perhaps in a roundabout way) linked to "
 "itself."
 msgstr ""
 "在 UNIX 環境下，通常可以把檔案或資料夾連結至其他的名稱或位置。 KDE 偵測到一個"
 "或一系列的連結，形成無限循環──也就是說， 該檔案直接或間接地連結回自己。"
 
 #: core/job_error.cpp:591 core/job_error.cpp:613
 #, kde-format
 msgid ""
 "Delete one part of the loop in order that it does not cause an infinite "
 "loop, and try again."
 msgstr "請刪除該循環的一部份，以斷開這個無限循環，再重試。"
 
 #: core/job_error.cpp:600
 #, kde-format
 msgid "Request Aborted By User"
 msgstr "要求已被使用者中止了"
 
 #: core/job_error.cpp:601 core/job_error.cpp:916
 #, kde-format
 msgid "The request was not completed because it was aborted."
 msgstr "該要求尚未完成，因為已被中止了。"
 
 #: core/job_error.cpp:603 core/job_error.cpp:807 core/job_error.cpp:918
 #, kde-format
 msgid "Retry the request."
 msgstr "重試要求。"
 
 #: core/job_error.cpp:607
 #, kde-format
 msgid "Cyclic Link Detected During Copy"
 msgstr "複製時偵測到循環連結"
 
 #: core/job_error.cpp:608
 #, kde-format
 msgid ""
 "UNIX environments are commonly able to link a file or folder to a separate "
 "name and/or location. During the requested copy operation, KDE detected a "
 "link or series of links that results in an infinite loop - i.e. the file was "
 "(perhaps in a roundabout way) linked to itself."
 msgstr ""
 "在 UNIX 環境下，通常可以把檔案或資料夾連結至其他的名稱或位置。 正當進行要求的"
 "複製動作時，KDE 偵測到一個或一系列的連結， 形成無限循環──也就是說，該檔案直接"
 "或間接地連結回自己。"
 
 #: core/job_error.cpp:618
 #, kde-format
 msgid "Could Not Create Network Connection"
 msgstr "無法建立網路連線"
 
 #: core/job_error.cpp:619
 #, kde-format
 msgid "Could Not Create Socket"
 msgstr "無法建立 Socket"
 
 #: core/job_error.cpp:620
 #, kde-format
 msgid ""
 "This is a fairly technical error in which a required device for network "
 "communications (a socket) could not be created."
-msgstr ""
-"這是一個相當技術性的錯誤，無法建立所需的網路通訊裝置 (socket, 承接口)。"
+msgstr "這是一個相當技術性的錯誤，無法建立所需的網路通訊裝置 (socket, 承接口)。"
 
 #: core/job_error.cpp:622 core/job_error.cpp:743 core/job_error.cpp:754
 #: core/job_error.cpp:763
 #, kde-format
 msgid ""
 "The network connection may be incorrectly configured, or the network "
 "interface may not be enabled."
 msgstr "可能是網路連線設定不正確，或是網路介面未啟動。"
 
 #: core/job_error.cpp:628
 #, kde-format
 msgid "Connection to Server Refused"
 msgstr "連線到伺服器被拒絕"
 
 #: core/job_error.cpp:629
 #, kde-format
 msgid ""
 "The server <strong>%1</strong> refused to allow this computer to make a "
 "connection."
 msgstr "伺服器 <strong>%1</strong> 拒絕了這部電腦的連線請求。"
 
 #: core/job_error.cpp:631
 #, kde-format
 msgid ""
 "The server, while currently connected to the Internet, may not be configured "
 "to allow requests."
 msgstr "該伺服器雖然在網際網路上，但可能設定為不允許外來的連線請求。"
 
 #: core/job_error.cpp:633
 #, kde-format
 msgid ""
 "The server, while currently connected to the Internet, may not be running "
 "the requested service (%1)."
 msgstr "該伺服器雖然在網際網路上，但是可能沒有執行所需的服務 (%1)。"
 
 #: core/job_error.cpp:635
 #, kde-format
 msgid ""
 "A network firewall (a device which restricts Internet requests), either "
 "protecting your network or the network of the server, may have intervened, "
 "preventing this request."
 msgstr ""
 "可能有個保護您的網路或伺服器的網路的防火牆 (限制網際網路請求的裝置) 干預，妨"
 "礙了這個要求。"
 
 #: core/job_error.cpp:642
 #, kde-format
 msgid "Connection to Server Closed Unexpectedly"
 msgstr "往伺服器的連線意外地關閉了"
 
 #: core/job_error.cpp:643
 #, kde-format
 msgid ""
 "Although a connection was established to <strong>%1</strong>, the connection "
 "was closed at an unexpected point in the communication."
-msgstr ""
-"雖然往 <strong>%1</strong> 的連線已經設立了，但通訊其間這個連線意外地中斷了。"
+msgstr "雖然往 <strong>%1</strong> 的連線已經設立了，但通訊其間這個連線意外地中斷了。"
 
 #: core/job_error.cpp:646
 #, kde-format
 msgid ""
 "A protocol error may have occurred, causing the server to close the "
 "connection as a response to the error."
 msgstr "可能發生了一個協定錯誤，導致伺服器回應錯誤而關閉連線。"
 
 #: core/job_error.cpp:652
 #, kde-format
 msgid "URL Resource Invalid"
 msgstr "無效的 URL 資源"
 
 #: core/job_error.cpp:653
 #, kde-format
 msgid "Protocol %1 is not a Filter Protocol"
 msgstr "該協定 %1 不是一個過濾協定"
 
 #: core/job_error.cpp:654
 #, kde-format
 msgid ""
 "The <strong>U</strong>niform <strong>R</strong>esource <strong>L</"
 "strong>ocator (URL) that you entered did not refer to a valid mechanism of "
 "accessing the specific resource, <strong>%1%2</strong>."
 msgstr ""
 "您輸入的 <strong>U</strong>niform <strong>R</strong>esource <strong>L</"
 "strong>ocator (URL) 並不指向有效的機制，無法存取特定的資源 <strong>%1%2</"
 "strong>。"
 
 #: core/job_error.cpp:659
 #, kde-format
 msgid ""
 "KDE is able to communicate through a protocol within a protocol. This "
 "request specified a protocol be used as such, however this protocol is not "
 "capable of such an action. This is a rare event, and is likely to indicate a "
 "programming error."
 msgstr ""
 "KDE 能夠在一個協定裡透過另一個協定進行通訊。現在要求指定該協定用作這種過濾用"
 "途，但該協定不能用作過濾用途。這個錯誤比較罕見，大概是編程出錯了。"
 
 #: core/job_error.cpp:667
 #, kde-format
 msgid "Unable to Initialize Input/Output Device"
 msgstr "無法初始化輸入/輸出裝置"
 
 #: core/job_error.cpp:668
 #, kde-format
 msgid "Could Not Mount Device"
 msgstr "無法裝載裝置"
 
 #: core/job_error.cpp:669
 #, kde-format
 msgid ""
 "The requested device could not be initialized (\"mounted\"). The reported "
 "error was: <strong>%1</strong>"
 msgstr "無法初始化 (掛載) 您所要求的裝置。報告的錯誤是：<strong>%1</strong>"
 
 #: core/job_error.cpp:672
 #, kde-format
 msgid ""
 "The device may not be ready, for example there may be no media in a "
 "removable media device (i.e. no CD-ROM in a CD drive), or in the case of a "
 "peripheral/portable device, the device may not be correctly connected."
 msgstr ""
 "該裝置可能未就緒，例如某抽取式媒體裝置裡可能沒有媒體 (光碟機裡沒有光碟)，或"
 "者，對週邊/可攜式裝置而言，可能該裝置的連線不正確。"
 
 #: core/job_error.cpp:676
 #, kde-format
 msgid ""
 "You may not have permissions to initialize (\"mount\") the device. On UNIX "
 "systems, often system administrator privileges are required to initialize a "
 "device."
 msgstr ""
 "您可能沒有權限初始化 (裝載, mount) 該裝置。在 UNIX 系統上，通常需要系統管理員"
 "的權限，才能初始化裝置。"
 
 #: core/job_error.cpp:680
 #, kde-format
 msgid ""
 "Check that the device is ready; removable drives must contain media, and "
 "portable devices must be connected and powered on.; and try again."
 msgstr ""
 "請檢查該裝置是否就緒：抽取式磁碟機或光碟機裡必須有媒體，而可攜式裝置必須已連"
 "接和打開電源；再重試。"
 
 #: core/job_error.cpp:686
 #, kde-format
 msgid "Unable to Uninitialize Input/Output Device"
 msgstr "無法反初始化輸入/輸出裝置"
 
 #: core/job_error.cpp:687
 #, kde-format
 msgid "Could Not Unmount Device"
 msgstr "無法卸載裝置"
 
 #: core/job_error.cpp:688
 #, kde-format
 msgid ""
 "The requested device could not be uninitialized (\"unmounted\"). The "
 "reported error was: <strong>%1</strong>"
 msgstr ""
 "無法反初始化 (卸載, ummount) 您所要求的裝置。報告的錯誤是：<strong>%1</"
 "strong>"
 
 #: core/job_error.cpp:691
 #, kde-format
 msgid ""
 "The device may be busy, that is, still in use by another application or "
 "user. Even such things as having an open browser window on a location on "
 "this device may cause the device to remain in use."
 msgstr ""
 "該裝置可能正在忙碌中，也就是說，可能有使用者或應用程式仍然在使用它。儘管只是"
 "有個開啟了的瀏覽器視窗在該裝置的某個位置上，也足以使該裝置停留在使用中狀態。"
 
 #: core/job_error.cpp:695
 #, kde-format
 msgid ""
 "You may not have permissions to uninitialize (\"unmount\") the device. On "
 "UNIX systems, system administrator privileges are often required to "
 "uninitialize a device."
 msgstr ""
 "您可能沒有權限反初始化 (卸載, ummount) 該裝置。在 UNIX 系統上，通常需要系統管"
 "理員的權限，才能初始化裝置。"
 
 #: core/job_error.cpp:699
 #, kde-format
 msgid "Check that no applications are accessing the device, and try again."
 msgstr "檢查沒有應用程式正在存取該裝置，再重試。"
 
 #: core/job_error.cpp:704
 #, kde-format
 msgid "Cannot Read From Resource"
 msgstr "無法讀入資源"
 
 #: core/job_error.cpp:705
 #, kde-format
 msgid ""
 "This means that although the resource, <strong>%1</strong>, was able to be "
 "opened, an error occurred while reading the contents of the resource."
 msgstr ""
 "這就是說，雖然 <strong>%1</strong> 這個資源可以開啟，但讀入這個資源的內容時發"
 "生錯誤。"
 
 #: core/job_error.cpp:708
 #, kde-format
 msgid "You may not have permissions to read from the resource."
 msgstr "您可能沒有權限讀入該資源。"
 
 #: core/job_error.cpp:721
 #, kde-format
 msgid "Cannot Write to Resource"
 msgstr "無法寫入資源"
 
 #: core/job_error.cpp:722
 #, kde-format
 msgid ""
 "This means that although the resource, <strong>%1</strong>, was able to be "
 "opened, an error occurred while writing to the resource."
 msgstr ""
 "這就是說，雖然 <strong>%1</strong> 這個資源可以開啟，但寫入這個資源時發生錯"
 "誤。"
 
 #: core/job_error.cpp:725
 #, kde-format
 msgid "You may not have permissions to write to the resource."
 msgstr "您可能沒有權限寫入該資源。"
 
 #: core/job_error.cpp:738 core/job_error.cpp:749
 #, kde-format
 msgid "Could Not Listen for Network Connections"
 msgstr "無法聽候網路連線"
 
 #: core/job_error.cpp:739
 #, kde-format
 msgid "Could Not Bind"
 msgstr "無法 Bind"
 
 #: core/job_error.cpp:740 core/job_error.cpp:751
 #, kde-format
 msgid ""
 "This is a fairly technical error in which a required device for network "
 "communications (a socket) could not be established to listen for incoming "
 "network connections."
 msgstr ""
 "這是一個相當技術性的錯誤，無法設立所需的網路通訊裝置 (socket, 承接口) 以聽候 "
 "(listen) 內進的網路連線。"
 
 #: core/job_error.cpp:750
 #, kde-format
 msgid "Could Not Listen"
 msgstr "無法聽候"
 
 #: core/job_error.cpp:760
 #, kde-format
 msgid "Could Not Accept Network Connection"
 msgstr "無法接受網路連線"
 
 #: core/job_error.cpp:761
 #, kde-format
 msgid ""
 "This is a fairly technical error in which an error occurred while attempting "
 "to accept an incoming network connection."
 msgstr "這是一個相當技術性的錯誤，試圖接受 (accept) 內進的網路連線時發生錯誤。"
 
 #: core/job_error.cpp:765
 #, kde-format
 msgid "You may not have permissions to accept the connection."
 msgstr "您可能沒有權限接受該連線。"
 
 #: core/job_error.cpp:770
 #, kde-format
 msgid "Could Not Login: %1"
 msgstr "無法登入：%1"
 
 #: core/job_error.cpp:771
 #, kde-format
 msgid ""
 "An attempt to login to perform the requested operation was unsuccessful."
 msgstr "剛試圖登入以執行要求的作業，但不成功。"
 
 #: core/job_error.cpp:782
 #, kde-format
 msgid "Could Not Determine Resource Status"
 msgstr "無法查詢資源狀態"
 
 #: core/job_error.cpp:783
 #, kde-format
 msgid "Could Not Stat Resource"
 msgstr "無法查詢資源狀態"
 
 #: core/job_error.cpp:784
 #, kde-format
 msgid ""
 "An attempt to determine information about the status of the resource <strong>"
 "%1</strong>, such as the resource name, type, size, etc., was unsuccessful."
 msgstr ""
 "剛試圖查詢關於資源 <strong>%1</strong> 狀態的資訊，例如資源名稱、類型、大小等"
 "等，但不成功。"
 
 #: core/job_error.cpp:787
 #, kde-format
 msgid "The specified resource may not have existed or may not be accessible."
 msgstr "指定的資源可能不存在或無法存取。"
 
 #. i18n( "Could not terminate listing %1" ).arg( errorText );
 #: core/job_error.cpp:795
 #, kde-format
 msgid "Could Not Cancel Listing"
 msgstr "無法取消內容列表"
 
 #: core/job_error.cpp:796
 #, kde-format
 msgid "FIXME: Document this"
 msgstr "FIXME: Document this, 尚未為此項目寫說明文件"
 
 #: core/job_error.cpp:800
 #, kde-format
 msgid "Could Not Create Folder"
 msgstr "無法建立資料夾"
 
 #: core/job_error.cpp:801
 #, kde-format
 msgid "An attempt to create the requested folder failed."
 msgstr "剛試圖建立要求的資料夾，但失敢了。"
 
 #: core/job_error.cpp:802
 #, kde-format
 msgid "The location where the folder was to be created may not exist."
 msgstr "要建立資料夾的位置可能不存在。"
 
 #: core/job_error.cpp:811
 #, kde-format
 msgid "Could Not Remove Folder"
 msgstr "無法移除資料夾"
 
 #: core/job_error.cpp:812
 #, kde-format
 msgid "An attempt to remove the specified folder, <strong>%1</strong>, failed."
 msgstr "剛試圖移除指定的資料夾， <strong>%1</strong>，但失敢了。"
 
 #: core/job_error.cpp:814
 #, kde-format
 msgid "The specified folder may not exist."
 msgstr "指定的資料夾可能不存在。"
 
 #: core/job_error.cpp:815
 #, kde-format
 msgid "The specified folder may not be empty."
 msgstr "指定的資料夾可能不是空的。"
 
 #: core/job_error.cpp:820
 #, kde-format
 msgid "Ensure that the folder exists and is empty, and try again."
 msgstr "請確定該資料夾存在，而且是空的，再重試。"
 
 #: core/job_error.cpp:825
 #, kde-format
 msgid "Could Not Resume File Transfer"
 msgstr "無法恢復檔案傳送"
 
 #: core/job_error.cpp:826
 #, kde-format
 msgid ""
 "The specified request asked that the transfer of file <strong>%1</strong> be "
 "resumed at a certain point of the transfer. This was not possible."
 msgstr ""
 "在傳送檔案 <strong>%1</strong> 中途時，指定要求重新繼續傳送的請求。這是不可能"
 "的。"
 
 #: core/job_error.cpp:829
 #, kde-format
 msgid "The protocol, or the server, may not support file resuming."
 msgstr "此通訊協定或伺服器可能不支援檔案續傳。"
 
 #: core/job_error.cpp:831
 #, kde-format
 msgid "Retry the request without attempting to resume transfer."
 msgstr "重新連線而不重複使用之前的連線。"
 
 #: core/job_error.cpp:836
 #, kde-format
 msgid "Could Not Rename Resource"
 msgstr "無法重新命名資源"
 
 #: core/job_error.cpp:837
 #, kde-format
 msgid "An attempt to rename the specified resource <strong>%1</strong> failed."
 msgstr "剛試圖重新命名指定的資源 <strong>%1</strong>，但失敗了。"
 
 #: core/job_error.cpp:847
 #, kde-format
 msgid "Could Not Alter Permissions of Resource"
 msgstr "無法變更資源的權限"
 
 #: core/job_error.cpp:848
 #, kde-format
 msgid ""
 "An attempt to alter the permissions on the specified resource <strong>%1</"
 "strong> failed."
 msgstr "剛試圖變更指定的資源 <strong>%1</strong> 的權限，但失敗了。"
 
 #: core/job_error.cpp:855
 #, kde-format
 msgid "Could Not Change Ownership of Resource"
 msgstr "無法變更資源的權限"
 
 #: core/job_error.cpp:856
 #, kde-format
 msgid ""
 "An attempt to change the ownership of the specified resource <strong>%1</"
 "strong> failed."
 msgstr "剛試圖變更指定的資源 <strong>%1</strong> 的權限，但失敗了。"
 
 #: core/job_error.cpp:863
 #, kde-format
 msgid "Could Not Delete Resource"
 msgstr "無法刪除資源"
 
 #: core/job_error.cpp:864
 #, kde-format
 msgid "An attempt to delete the specified resource <strong>%1</strong> failed."
 msgstr "剛試圖刪除指定的資源 <strong>%1</strong>，但失敗了。"
 
 #: core/job_error.cpp:871
 #, kde-format
 msgid "Unexpected Program Termination"
 msgstr "非預期的程式終止。"
 
 #: core/job_error.cpp:872
 #, kde-format
 msgid ""
 "The program on your computer which provides access to the <strong>%1</"
 "strong> protocol has unexpectedly terminated."
 msgstr "在您的電腦上提供 <strong>%1</strong> 協定存取的程式意外地突然終止了。"
 
 #: core/job_error.cpp:880
 #, kde-format
 msgid "Out of Memory"
 msgstr "記憶體不足"
 
 #: core/job_error.cpp:881
 #, kde-format
 msgid ""
 "The program on your computer which provides access to the <strong>%1</"
 "strong> protocol could not obtain the memory required to continue."
 msgstr ""
 "在您的電腦上提供 <strong>%1</strong> 協定存取的程式未能取得所需的記憶體，無法"
 "繼續。"
 
 #: core/job_error.cpp:889
 #, kde-format
 msgid "Unknown Proxy Host"
 msgstr "不明的代理伺服器主機"
 
 #: core/job_error.cpp:890
 #, kde-format
 msgid ""
 "While retrieving information about the specified proxy host, <strong>%1</"
 "strong>, an Unknown Host error was encountered. An unknown host error "
 "indicates that the requested name could not be located on the Internet."
 msgstr ""
 "當抓取特定的 proxy 主機 <strong>%1</strong> 時，發生找不到主機的錯誤。該錯誤"
 "通常代表該主機名稱在網際網路上找不到。"
 
 #: core/job_error.cpp:894
 #, kde-format
 msgid ""
 "There may have been a problem with your network configuration, specifically "
 "your proxy's hostname. If you have been accessing the Internet with no "
 "problems recently, this is unlikely."
 msgstr ""
 "您的網路設定可能有問題，特別是您的 proxy 主機名稱。如果您最近曾經很正常的使用"
 "網路，那一定有問題。"
 
 #: core/job_error.cpp:898
 #, kde-format
 msgid "Double-check your proxy settings and try again."
 msgstr "請再三檢查您的代理伺服器設定，然後再重試。"
 
 #: core/job_error.cpp:903
 #, kde-format
 msgid "Authentication Failed: Method %1 Not Supported"
 msgstr "授權失敗：不支援 %1 認證方式"
 
 #: core/job_error.cpp:905
 #, kde-format
 msgid ""
 "Although you may have supplied the correct authentication details, the "
 "authentication failed because the method that the server is using is not "
 "supported by the KDE program implementing the protocol %1."
 msgstr ""
 "隨然您或許還沒有提供正確的授權方式，這次授權動作已經失敗了。這樣因為伺服器所"
 "提供的授權方式，KDE 程式所實做的 %1 協定中並不支援。"
 
 #: core/job_error.cpp:909
 #, kde-format
 msgid ""
 "Please file a bug at <a href=\"http://bugs.kde.org/\">http://bugs.kde.org/</"
 "a> to inform the KDE team of the unsupported authentication method."
 msgstr ""
 "請在 <a href=\"http://bugs.kde.org/\">http://bugs.kde.org/</a> 做一個錯誤登"
 "記，以便告知 KDE 團隊這個不被支援的驗證方式。"
 
 #: core/job_error.cpp:915
 #, kde-format
 msgid "Request Aborted"
 msgstr "要求中止"
 
 #: core/job_error.cpp:922
 #, kde-format
 msgid "Internal Error in Server"
 msgstr "伺服器內部錯誤"
 
 #: core/job_error.cpp:923
 #, kde-format
 msgid ""
 "The program on the server which provides access to the <strong>%1</strong> "
 "protocol has reported an internal error: %2."
 msgstr "伺服器上提供 <strong>%1</strong> 協定的存取的程式報告內部錯誤：%2。"
 
 #: core/job_error.cpp:926
 #, kde-format
 msgid ""
 "This is most likely to be caused by a bug in the server program. Please "
 "consider submitting a full bug report as detailed below."
-msgstr ""
-"這大概是因為該伺服器程式內部有錯誤。請考慮依照下列指示提交完整的錯誤報告。"
+msgstr "這大概是因為該伺服器程式內部有錯誤。請考慮依照下列指示提交完整的錯誤報告。"
 
 #: core/job_error.cpp:929
 #, kde-format
 msgid "Contact the administrator of the server to advise them of the problem."
 msgstr "請聯繫伺服器的管理員，報告這個問題。"
 
 #: core/job_error.cpp:931
 #, kde-format
 msgid ""
 "If you know who the authors of the server software are, submit the bug "
 "report directly to them."
 msgstr "如果您知道誰是該伺服器軟體的作者，請直接把錯誤報告提交給他們。"
 
 #: core/job_error.cpp:936
 #, kde-format
 msgid "Timeout Error"
 msgstr "逾時錯誤"
 
 #: core/job_error.cpp:937
 #, kde-format
 msgid ""
 "Although contact was made with the server, a response was not received "
 "within the amount of time allocated for the request as follows:"
 "<ul><li>Timeout for establishing a connection: %1 seconds</li><li>Timeout "
 "for receiving a response: %2 seconds</li><li>Timeout for accessing proxy "
 "servers: %3 seconds</li></ul>Please note that you can alter these timeout "
 "settings in the KDE System Settings, by selecting Network Settings -> "
 "Connection Preferences."
 msgstr ""
 "雖然已經與伺服器聯繫，但在配置給該要求的限定時間內，未收到伺服器的回應，細節"
 "如下：<ul><li>設立連線逾時時限：%1 秒</li><li>接收回應逾時時限：%2 秒</"
 "li><li>存取代理伺服器逾時時限：%3 秒</li></ul>註：您可以在 KDE 系統設定中，選"
 "擇 「網路設定」─「連線偏好設定」，以變更這些逾時時限設定。"
 
 #: core/job_error.cpp:948
 #, kde-format
 msgid "The server was too busy responding to other requests to respond."
 msgstr "伺服器太忙碌回應其他請求，所以暫時未能回應您的請求。"
 
 #: core/job_error.cpp:954 core/slavebase.cpp:1440
 #, kde-format
 msgid "Unknown Error"
 msgstr "不明的錯誤"
 
 #: core/job_error.cpp:955
 #, kde-format
 msgid ""
 "The program on your computer which provides access to the <strong>%1</"
 "strong> protocol has reported an unknown error: %2."
 msgstr ""
 "您的電腦上，提供 <strong>%1</strong> 協定的存取的程式，報告了一個不明的錯誤："
 "%2。"
 
 #: core/job_error.cpp:963
 #, kde-format
 msgid "Unknown Interruption"
 msgstr "不明的中斷"
 
 #: core/job_error.cpp:964
 #, kde-format
 msgid ""
 "The program on your computer which provides access to the <strong>%1</"
 "strong> protocol has reported an interruption of an unknown type: %2."
 msgstr ""
 "您的電腦上，提供 <strong>%1</strong> 協定的存取的程式，報告了一種類型不明的中"
 "斷：%2。"
 
 #: core/job_error.cpp:972
 #, kde-format
 msgid "Could Not Delete Original File"
 msgstr "無法刪除原本的檔案"
 
 #: core/job_error.cpp:973
 #, kde-format
 msgid ""
 "The requested operation required the deleting of the original file, most "
 "likely at the end of a file move operation. The original file <strong>%1</"
 "strong> could not be deleted."
 msgstr ""
 "要求的作業需要刪除原本的檔案，多數是移動檔案時最後一個動作。可是，現在無法刪"
 "除原本的檔案 <strong>%1</strong>。"
 
 #: core/job_error.cpp:982
 #, kde-format
 msgid "Could Not Delete Temporary File"
 msgstr "無法刪除暫存檔案"
 
 #: core/job_error.cpp:983
 #, kde-format
 msgid ""
 "The requested operation required the creation of a temporary file in which "
 "to save the new file while being downloaded. This temporary file <strong>%1</"
 "strong> could not be deleted."
 msgstr ""
 "要求的作業需要建立一個暫存檔案，以儲存下載中的新檔案。可是，現在無法刪除該暫"
 "存檔案 <strong>%1</strong>。"
 
 #: core/job_error.cpp:992
 #, kde-format
 msgid "Could Not Rename Original File"
 msgstr "無法重新命名原本檔案"
 
 #: core/job_error.cpp:993
 #, kde-format
 msgid ""
 "The requested operation required the renaming of the original file <strong>"
 "%1</strong>, however it could not be renamed."
 msgstr ""
 "要求的作業需要重新命名原本的檔案 <strong>%1</strong>，然而現在卻無法為它重新"
 "命名。"
 
 #: core/job_error.cpp:1001
 #, kde-format
 msgid "Could Not Rename Temporary File"
 msgstr "無法重新命名暫存檔案"
 
 #: core/job_error.cpp:1002
 #, kde-format
 msgid ""
 "The requested operation required the creation of a temporary file <strong>"
 "%1</strong>, however it could not be created."
 msgstr ""
 "要求的作業需要建立一個暫存檔案 <strong>%1</strong>，然而現在無法建立該暫存檔"
 "案。"
 
 #: core/job_error.cpp:1010
 #, kde-format
 msgid "Could Not Create Link"
 msgstr "無法建立連結"
 
 #: core/job_error.cpp:1011
 #, kde-format
 msgid "Could Not Create Symbolic Link"
 msgstr "無法建立符號連結"
 
 #: core/job_error.cpp:1012
 #, kde-format
 msgid "The requested symbolic link %1 could not be created."
 msgstr "要求的符號連結 %1 無法建立。"
 
 #: core/job_error.cpp:1019
 #, kde-format
 msgid "No Content"
 msgstr "無內容"
 
 #: core/job_error.cpp:1024
 #, kde-format
 msgid "Disk Full"
 msgstr "磁碟已滿"
 
 #: core/job_error.cpp:1025
 #, kde-format
 msgid ""
 "The requested file <strong>%1</strong> could not be written to as there is "
 "inadequate disk space."
 msgstr "要求的檔案 <strong>%1</strong> 無法寫入，因為磁碟空間不足。"
 
 #: core/job_error.cpp:1027
 #, kde-format
 msgid ""
 "Free up enough disk space by 1) deleting unwanted and temporary files; 2) "
 "archiving files to removable media storage such as CD-Recordable discs; or "
 "3) obtain more storage capacity."
 msgstr ""
 "請以下列方法釋放足夠的磁碟空間： 1) 刪除不需的或暫存的檔案； 2) 把檔案歸檔至"
 "抽取式媒體存儲，例如 CD-R 可燒錄光碟； 3) 取得更多存儲容量。"
 
 #: core/job_error.cpp:1034
 #, kde-format
 msgid "Source and Destination Files Identical"
 msgstr "來源跟目的都是同一個檔案"
 
 #: core/job_error.cpp:1035
 #, kde-format
 msgid ""
 "The operation could not be completed because the source and destination "
 "files are the same file."
 msgstr "無法完成作業，因為來源跟目的都是同一個檔案。"
 
 #: core/job_error.cpp:1037
 #, kde-format
 msgid "Choose a different filename for the destination file."
 msgstr "請為目的檔案選擇另一個檔名。"
 
 #: core/job_error.cpp:1041
 #, kde-format
 msgid "File or Folder dropped onto itself"
 msgstr "檔案資料夾放到它自己裡面"
 
 #: core/job_error.cpp:1042
 #, kde-format
 msgid ""
 "The operation could not be completed because the source and destination file "
 "or folder are the same."
 msgstr "無法完成作業，因為來源跟目的都是同一個檔案或資料夾。"
 
 #: core/job_error.cpp:1044
 #, kde-format
 msgid "Drop the item into a different file or folder."
 msgstr "請放到不同的檔案或資料夾。"
 
 #: core/job_error.cpp:1054
 #, kde-format
 msgid "Folder moved into itself"
 msgstr "資料夾已經移動到它自己裡面"
 
 #: core/job_error.cpp:1055
 #, kde-format
 msgid ""
 "The operation could not be completed because the source can not be moved "
 "into itself."
 msgstr "作業無法完成，因為來源無法移動到 它自己裡面。"
 
 #: core/job_error.cpp:1057
 #, kde-format
 msgid "Move the item into a different folder."
 msgstr "請移動到不同的資料夾中。"
 
 #: core/job_error.cpp:1061
 #, kde-format
 msgid "Could not communicate with password server"
 msgstr "無法與密碼伺服器聯繫"
 
 #: core/job_error.cpp:1062
 #, kde-format
 msgid ""
 "The operation could not be completed because the service for requesting "
 "passwords (kpasswdserver) couldn't be contacted"
 msgstr "作業無法完成，因為要求密碼的服務(kpasswdserver) 無法聯繫"
 
 #: core/job_error.cpp:1064
 #, kde-format
 msgid "Try restarting your session, or look in the logs for errors from kiod."
 msgstr "嘗試重新啟動您的工作階段，或是看看從 kiod 而來的紀錄中有沒有錯誤。"
 
 #: core/job_error.cpp:1068
 #, kde-format
 msgid "Cannot Initiate the %1 Protocol"
 msgstr "無法開動 %1 通訊協定"
 
 #: core/job_error.cpp:1069
 #, kde-format
 msgid "Unable to Create io-slave"
 msgstr "無法建立 io-slave"
 
 #: core/job_error.cpp:1070
 #, kde-format
 msgid ""
 "The io-slave which provides access to the <strong>%1</strong> protocol could "
 "not be started. This is usually due to technical reasons."
 msgstr ""
 "提供 <strong>%1</strong> 協定存取的 io-slave 無法啟動。這通常是由某些技術原因"
 "所致。"
 
 #: core/job_error.cpp:1073
 #, kde-format
 msgid ""
 "klauncher could not find or start the plugin which provides the protocol."
 "This means you may have an outdated version of the plugin."
-msgstr ""
-"klauncher 找不到或無法啟動提供通訊協定的外掛。這代表了您的外掛程式太舊了。"
+msgstr "klauncher 找不到或無法啟動提供通訊協定的外掛。這代表了您的外掛程式太舊了。"
 
 #: core/job_error.cpp:1079
 #, kde-kuit-format
 msgctxt "@info"
 msgid "Cannot transfer <filename>%1</filename>"
 msgstr "無法傳輸 <filename>%1</filename>"
 
 #: core/job_error.cpp:1080
 #, kde-kuit-format
 msgctxt "@info"
 msgid ""
 "The file <filename>%1</filename> cannot be transferred, because the "
 "destination filesystem does not support files that large"
-msgstr ""
-"無法傳輸檔案 <filename>%1</filename>，因為目標檔案系統不支援這麼大的檔案"
+msgstr "無法傳輸檔案 <filename>%1</filename>，因為目標檔案系統不支援這麼大的檔案"
 
 #: core/job_error.cpp:1082
 #, kde-format
 msgid ""
 "Reformat the destination drive to use a filesystem that supports files that "
 "large."
 msgstr "重新格式化目標硬碟的檔案系統到支援大檔案的檔案系統。"
 
 #: core/job_error.cpp:1087
 #, kde-format
 msgid "Undocumented Error"
 msgstr "未說明的錯誤"
 
 #: core/kcoredirlister.cpp:395 widgets/krun.cpp:940 widgets/paste.cpp:275
 #: widgets/renamedialog.cpp:459
 #, kde-format
 msgid ""
 "Malformed URL\n"
 "%1"
 msgstr ""
 "不正確的 URL\n"
 "%1"
 
 #: core/kcoredirlister.cpp:400
 #, kde-format
 msgid ""
 "URL cannot be listed\n"
 "%1"
 msgstr ""
 "無法列出網址\n"
 "%1"
 
 #: core/kfileitem.cpp:1197
 #, kde-format
 msgid "(Symbolic Link to %1)"
 msgstr "（符號連結到 %1）"
 
 #: core/kfileitem.cpp:1199
 #, kde-format
 msgid "(%1, Link to %2)"
 msgstr "（%1，連結到 %2）"
 
 #: core/kfileitem.cpp:1202
 #, kde-format
 msgid " (Points to %1)"
 msgstr "（指向 %1）"
 
 #: core/klocalsocket_unix.cpp:192 core/klocalsocket_unix.cpp:260
 #, kde-format
 msgid "Specified socket path is invalid"
 msgstr "指定的 socket 路徑不合法"
 
 #: core/klocalsocket_unix.cpp:201 core/klocalsocket_unix.cpp:248
 #: core/klocalsocket_unix.cpp:269
 #, kde-format
 msgid "The socket operation is not supported"
 msgstr "Socket 操作不被支援"
 
 #: core/klocalsocket_unix.cpp:214
 #, kde-format
 msgid "Connection refused"
 msgstr "連線被拒"
 
 #: core/klocalsocket_unix.cpp:219 core/klocalsocket_unix.cpp:282
 #, kde-format
 msgid "Permission denied"
 msgstr "權限不足"
 
 #: core/klocalsocket_unix.cpp:223
 #, kde-format
 msgid "Connection timed out"
 msgstr "連線逾時"
 
 #: core/klocalsocket_unix.cpp:227 core/klocalsocket_unix.cpp:307
 #, kde-format
 msgid "Unknown error"
 msgstr "未知的錯誤"
 
 #: core/klocalsocket_unix.cpp:235 core/klocalsocket_unix.cpp:315
 #, kde-format
 msgid "Could not set non-blocking mode"
 msgstr "無法設定非阻斷性模式"
 
 #: core/klocalsocket_unix.cpp:286
 #, kde-format
 msgid "Address is already in use"
 msgstr "位址已被使用"
 
 #: core/klocalsocket_unix.cpp:291
 #, kde-format
 msgid "Path cannot be used"
 msgstr "路徑無法被使用"
 
 #: core/klocalsocket_unix.cpp:295
 #, kde-format
 msgid "No such file or directory"
 msgstr "找不到該檔案或目錄"
 
 #: core/klocalsocket_unix.cpp:299
 #, kde-format
 msgid "Not a directory"
 msgstr "xdg 自動啟動目錄"
 
 #: core/klocalsocket_unix.cpp:303
 #, kde-format
 msgid "Read-only filesystem"
 msgstr "唯讀的檔案系統"
 
 #: core/klocalsocket_unix.cpp:370 core/klocalsocket_unix.cpp:404
 #, kde-format
 msgid "Unknown socket error"
 msgstr "不明的錯誤"
 
 #: core/klocalsocket_win.cpp:31 core/klocalsocket_win.cpp:36
 #, kde-format
 msgid "Operation not supported"
 msgstr "動作不被支援"
 
 #: core/ktcpsocket.cpp:205
 #, kde-format
 msgctxt "SSL error"
 msgid "No error"
 msgstr "沒有錯誤"
 
 #: core/ktcpsocket.cpp:207
 #, kde-format
 msgctxt "SSL error"
 msgid "The certificate authority's certificate is invalid"
 msgstr "憑證管理中心（CA）的憑證不合法"
 
 #: core/ktcpsocket.cpp:209
 #, kde-format
 msgctxt "SSL error"
 msgid "The certificate has expired"
 msgstr "此憑證已過期"
 
 #: core/ktcpsocket.cpp:211
 #, kde-format
 msgctxt "SSL error"
 msgid "The certificate is invalid"
 msgstr "此憑證不合法"
 
 #: core/ktcpsocket.cpp:213
 #, kde-format
 msgctxt "SSL error"
 msgid "The certificate is not signed by any trusted certificate authority"
 msgstr "此憑證並未經由任何可信任的憑證管理中心簽署"
 
 #: core/ktcpsocket.cpp:215
 #, kde-format
 msgctxt "SSL error"
 msgid "The certificate has been revoked"
 msgstr "此憑證已被撤銷"
 
 #: core/ktcpsocket.cpp:217
 #, kde-format
 msgctxt "SSL error"
 msgid "The certificate is unsuitable for this purpose"
 msgstr "此憑證不適用於此目的"
 
 #: core/ktcpsocket.cpp:219
 #, kde-format
 msgctxt "SSL error"
 msgid ""
 "The root certificate authority's certificate is not trusted for this purpose"
 msgstr "根憑證管理中心（root CA）的憑證並未被信任用於此目的"
 
 #: core/ktcpsocket.cpp:221
 #, kde-format
 msgctxt "SSL error"
 msgid ""
 "The certificate authority's certificate is marked to reject this "
 "certificate's purpose"
 msgstr "此憑證管理中心（CA）的憑證上有特別註記不適用於此目的"
 
 #: core/ktcpsocket.cpp:223
 #, kde-format
 msgctxt "SSL error"
 msgid "The peer did not present any certificate"
 msgstr "此端點並未提供任何憑證"
 
 #: core/ktcpsocket.cpp:225
 #, kde-format
 msgctxt "SSL error"
 msgid "The certificate does not apply to the given host"
 msgstr "此憑證並非適用於此主機"
 
 #: core/ktcpsocket.cpp:227
 #, kde-format
 msgctxt "SSL error"
 msgid "The certificate cannot be verified for internal reasons"
 msgstr "此憑證因內部因素無法被檢查"
 
 #: core/ktcpsocket.cpp:229
 #, kde-format
 msgctxt "SSL error"
 msgid "The certificate chain is too long"
 msgstr "憑證鍊過長"
 
 #: core/ktcpsocket.cpp:232
 #, kde-format
 msgctxt "SSL error"
 msgid "Unknown error"
 msgstr "未知的錯誤"
 
 #: core/slave.cpp:477
 #, kde-format
 msgid "Can not create socket for launching io-slave for protocol '%1'."
 msgstr "無法建立 socket 給「%1」協定來開啟 io-slave 程式。"
 
 #: core/slave.cpp:486
 #, kde-format
 msgid "Unknown protocol '%1'."
 msgstr "不明的協定「%1」。"
 
 #: core/slave.cpp:496
 #, kde-format
 msgid "Can not find io-slave for protocol '%1'."
 msgstr "找不到「%1」協定的 io-slave 程式。"
 
 #: core/slave.cpp:518
 #, kde-format
 msgid "Can not find 'kioslave' executable at '%1'"
 msgstr "在 %1 找不到 kioslave 執行檔"
 
 #: core/slave.cpp:532
 #, kde-format
 msgid "Cannot talk to klauncher: %1"
 msgstr "無法與 klauncher 交談：%1"
 
 #: core/slave.cpp:539
 #, kde-format
 msgid "klauncher said: %1"
 msgstr "klauncher 說：%1"
 
 #: core/slavebase.cpp:785
 #, kde-format
 msgid "Opening connections is not supported with the protocol %1."
 msgstr "%1 通訊協定不支援開啟連線。"
 
 #: core/slavebase.cpp:787
 #, kde-format
 msgid "Closing connections is not supported with the protocol %1."
 msgstr "%1 通訊協定不支援關閉連線。"
 
 #: core/slavebase.cpp:789
 #, kde-format
 msgid "Accessing files is not supported with the protocol %1."
 msgstr "%1 通訊協定不支援存取檔案。"
 
 #: core/slavebase.cpp:791
 #, kde-format
 msgid "Writing to %1 is not supported."
 msgstr "不支援寫入 %1。"
 
 #: core/slavebase.cpp:793
 #, kde-format
 msgid "There are no special actions available for protocol %1."
 msgstr "%1 通訊協定沒有可用的特殊的動作。"
 
 #: core/slavebase.cpp:795
 #, kde-format
 msgid "Listing folders is not supported for protocol %1."
 msgstr "%1 通訊協定不支援列出資料夾內容。"
 
 #: core/slavebase.cpp:797
 #, kde-format
 msgid "Retrieving data from %1 is not supported."
 msgstr "不支援從 %1 取回資料。"
 
 #: core/slavebase.cpp:799
 #, kde-format
 msgid "Retrieving mime type information from %1 is not supported."
 msgstr "不支援從 %1 取回 mime 類型資訊。"
 
 #: core/slavebase.cpp:801
 #, kde-format
 msgid "Renaming or moving files within %1 is not supported."
 msgstr "不支援在 %1 裡重新命名或移動檔案。"
 
 #: core/slavebase.cpp:803
 #, kde-format
 msgid "Creating symlinks is not supported with protocol %1."
 msgstr "%1 通訊協定不支援建立符號連結。"
 
 #: core/slavebase.cpp:805
 #, kde-format
 msgid "Copying files within %1 is not supported."
 msgstr "不支援在 %1 裡複製檔案。"
 
 #: core/slavebase.cpp:807
 #, kde-format
 msgid "Deleting files from %1 is not supported."
 msgstr "不支援由 %1 刪除檔案。"
 
 #: core/slavebase.cpp:809
 #, kde-format
 msgid "Creating folders is not supported with protocol %1."
 msgstr "%1 通訊協定不支援建立資料夾。"
 
 #: core/slavebase.cpp:811
 #, kde-format
 msgid "Changing the attributes of files is not supported with protocol %1."
 msgstr "%1 通訊協定不支援變更檔案屬性。"
 
 #: core/slavebase.cpp:813
 #, kde-format
 msgid "Changing the ownership of files is not supported with protocol %1."
 msgstr "%1 通訊協定不支援變更檔案屬性。"
 
 #: core/slavebase.cpp:815
 #, kde-format
 msgid "Using sub-URLs with %1 is not supported."
 msgstr "%1 通訊協定不支援子 URL 的使用。"
 
 #: core/slavebase.cpp:817
 #, kde-format
 msgid "Multiple get is not supported with protocol %1."
 msgstr "%1 通訊協定不支援多重擷取。"
 
 #: core/slavebase.cpp:819
 #, kde-format
 msgid "Opening files is not supported with protocol %1."
 msgstr "%1 通訊協定不支援開啟檔案。"
 
 #: core/slavebase.cpp:821
 #, kde-format
 msgid "Protocol %1 does not support action %2."
 msgstr "通訊協定 %1 不支援動作 %2。"
 
 #: core/slavebase.cpp:974
 #, kde-format
 msgid "&Yes"
 msgstr "是(&Y)"
 
 #: core/slavebase.cpp:975
 #, kde-format
 msgid "&No"
 msgstr "否(&N)"
 
 #: core/slaveinterface.cpp:414 core/tcpslavebase.cpp:759 widgets/sslui.cpp:77
 #, kde-format
 msgid "&Details"
 msgstr "詳細資料(&D)"
 
 #: core/slaveinterface.cpp:416 core/tcpslavebase.cpp:772 widgets/sslui.cpp:114
 #, kde-format
 msgid "&Forever"
 msgstr "永遠(&F)"
 
 #: core/slaveinterface.cpp:420 core/tcpslavebase.cpp:759 widgets/sslui.cpp:78
 #, kde-format
 msgid "Co&ntinue"
 msgstr "繼續(&N)"
 
 #: core/slaveinterface.cpp:422 core/tcpslavebase.cpp:773 widgets/sslui.cpp:115
 #, kde-format
 msgid "&Current Session only"
 msgstr "只用於目前的工作階段(&C)"
 
 #: core/tcpslavebase.cpp:322
 #, kde-format
 msgid ""
 "You are about to leave secure mode. Transmissions will no longer be "
 "encrypted.\n"
 "This means that a third party could observe your data in transit."
 msgstr ""
 "您即將離開安全模式，資料傳輸將不再被加密。\n"
 "這意味著第三方有可能查看到您傳輸的資料。"
 
 #: core/tcpslavebase.cpp:328 core/tcpslavebase.cpp:527
 #, kde-format
 msgid "Security Information"
 msgstr "安全性資訊"
 
 #: core/tcpslavebase.cpp:329
 #, kde-format
 msgid "C&ontinue Loading"
 msgstr "繼續載入(&O)"
 
 #: core/tcpslavebase.cpp:381
 #, kde-format
 msgctxt "%1 is a host name"
 msgid "%1: SSL negotiation failed"
 msgstr "%1：SSL 協商失敗。"
 
 #: core/tcpslavebase.cpp:521
 #, kde-format
 msgid ""
 "You are about to enter secure mode. All transmissions will be encrypted "
 "unless otherwise noted.\n"
 "This means that no third party will be able to easily observe your data in "
 "transit."
 msgstr ""
 "您即將進入安全模式。所有的傳輸將被加密除非有其他通知。\n"
 "這代表沒有其他軟體可以輕易得到您傳輸的資料。"
 
 #: core/tcpslavebase.cpp:528
 #, kde-format
 msgid "Display SSL &Information"
 msgstr "顯示 SSL 資訊(&I)"
 
 #: core/tcpslavebase.cpp:529
 #, kde-format
 msgid "C&onnect"
 msgstr "連線(&O)"
 
 #: core/tcpslavebase.cpp:673
 #, kde-format
 msgid "Enter the certificate password:"
 msgstr "請輸入憑證密碼："
 
 #: core/tcpslavebase.cpp:674
 #, kde-format
 msgid "SSL Certificate Password"
 msgstr "SSL 憑證密碼"
 
 #: core/tcpslavebase.cpp:688
 #, kde-format
 msgid "Unable to open the certificate. Try a new password?"
 msgstr "無法開啟憑證。要試用新的密碼嗎？"
 
 #: core/tcpslavebase.cpp:702
 #, kde-format
 msgid "The procedure to set the client certificate for the session failed."
 msgstr "為本次協議所設定的客戶端憑證失敗。"
 
 #: core/tcpslavebase.cpp:704 widgets/jobuidelegate.cpp:371
 #, kde-format
 msgid "SSL"
 msgstr "SSL"
 
 #: core/tcpslavebase.cpp:748 widgets/sslui.cpp:68
 #, kde-format
 msgid ""
 "The server failed the authenticity check (%1).\n"
 "\n"
 msgstr ""
 "此伺服器憑證未能通過認證測試 (%1)。\n"
 "\n"
 
 #: core/tcpslavebase.cpp:758 core/tcpslavebase.cpp:771
 #: core/tcpslavebase.cpp:885 core/tcpslavebase.cpp:897 widgets/sslui.cpp:76
 #: widgets/sslui.cpp:113
 #, kde-format
 msgid "Server Authentication"
 msgstr "伺服端認證"
 
 #: core/tcpslavebase.cpp:768 widgets/sslui.cpp:110
 #, kde-format
 msgid ""
 "Would you like to accept this certificate forever without being prompted?"
 msgstr "您希望以後不提示就接受該憑證嗎？"
 
 #: core/tcpslavebase.cpp:884
 #, kde-format
 msgid ""
 "You have indicated that you wish to accept this certificate, but it is not "
 "issued to the server who is presenting it. Do you wish to continue loading?"
 msgstr ""
 "您表示您想接受此憑證，但它並不是頒發給現在出示此憑證的伺服器。您真的要繼續載"
 "入嗎？"
 
 #: core/tcpslavebase.cpp:896
 #, kde-format
 msgid ""
 "SSL certificate is being rejected as requested. You can disable this in the "
 "KDE System Settings."
 msgstr "如您所要求的，SSL 憑證正被拒絕。您可以在 KDE 系統設定停用這項設定。"
 
 #: filewidgets/kdiroperator.cpp:765
 #, kde-format
 msgid "A file or folder named %1 already exists."
 msgstr "名為 %1 的檔案或資料夾已經存在。"
 
 #: filewidgets/kdiroperator.cpp:768
 #, kde-format
 msgid "You do not have permission to create that folder."
 msgstr "您沒有權限建立該資料夾。"
 
 #: filewidgets/kdiroperator.cpp:783
 #, kde-format
 msgid "You did not select a file to delete."
 msgstr "您尚未選擇要刪除的檔案。"
 
 #: filewidgets/kdiroperator.cpp:784
 #, kde-format
 msgid "Nothing to Delete"
 msgstr "沒有任何要刪除的東西"
 
 #: filewidgets/kdiroperator.cpp:826
 #, kde-format
 msgid "You did not select a file to trash."
 msgstr "您尚未選擇要丟到垃圾桶的檔案。"
 
 #: filewidgets/kdiroperator.cpp:827
 #, kde-format
 msgid "Nothing to Trash"
 msgstr "沒有要丟到垃圾桶的東西"
 
 #: filewidgets/kdiroperator.cpp:1027 filewidgets/kdiroperator.cpp:1172
 #, kde-format
 msgid "The specified folder does not exist or was not readable."
 msgstr "指定的資料夾不存在或無法讀取。"
 
 #: filewidgets/kdiroperator.cpp:1852
 #, kde-format
 msgid "Menu"
 msgstr "選單"
 
 #: filewidgets/kdiroperator.cpp:1856
 #, kde-format
 msgid "Parent Folder"
 msgstr "上層資料夾"
 
 #: filewidgets/kdiroperator.cpp:1863
 #, kde-format
 msgid "Home Folder"
 msgstr "家資料夾"
 
 #: filewidgets/kdiroperator.cpp:1866
 #, kde-format
 msgid "Reload"
 msgstr "重新載入"
 
 #: filewidgets/kdiroperator.cpp:1869
 #, kde-format
 msgid "New Folder..."
 msgstr "新增資料夾..."
 
 #: filewidgets/kdiroperator.cpp:1874 widgets/jobuidelegate.cpp:266
 #: widgets/jobuidelegate.cpp:267 widgets/jobuidelegate.cpp:275
 #: widgets/jobuidelegate.cpp:276
 #, kde-format
 msgid "Move to Trash"
 msgstr "移至垃圾桶"
 
 #: filewidgets/kdiroperator.cpp:1880
 #, kde-format
 msgid "Delete"
 msgstr "刪除"
 
 #: filewidgets/kdiroperator.cpp:1887
 #, kde-format
 msgid "Sorting"
 msgstr "排序中"
 
 #: filewidgets/kdiroperator.cpp:1892
 #, kde-format
 msgid "Sort by Name"
 msgstr "依名稱排序"
 
 #: filewidgets/kdiroperator.cpp:1896
 #, kde-format
 msgid "Sort by Size"
 msgstr "依大小排序"
 
 #: filewidgets/kdiroperator.cpp:1900
 #, kde-format
 msgid "Sort by Date"
 msgstr "依日期排序"
 
 #: filewidgets/kdiroperator.cpp:1904
 #, kde-format
 msgid "Sort by Type"
 msgstr "依類型排序"
 
 #: filewidgets/kdiroperator.cpp:1908
 #, kde-format
 msgid "Descending"
 msgstr "遞減"
 
 #: filewidgets/kdiroperator.cpp:1912
 #, kde-format
 msgid "Folders First"
 msgstr "目錄在前"
 
 #: filewidgets/kdiroperator.cpp:1922
 #, kde-format
 msgid "Icon Position"
 msgstr "圖示位置"
 
 #: filewidgets/kdiroperator.cpp:1925
 #, kde-format
 msgid "Next to File Name"
 msgstr "在檔名之後"
 
 #: filewidgets/kdiroperator.cpp:1929
 #, kde-format
 msgid "Above File Name"
 msgstr "在檔名之上"
 
 #: filewidgets/kdiroperator.cpp:1940
 #, kde-format
 msgid "Short View"
 msgstr "簡短檢視"
 
 #: filewidgets/kdiroperator.cpp:1945
 #, kde-format
 msgid "Detailed View"
 msgstr "詳細檢視"
 
 #: filewidgets/kdiroperator.cpp:1950
 #, kde-format
 msgid "Tree View"
 msgstr "樹狀檢視"
 
 #: filewidgets/kdiroperator.cpp:1955
 #, kde-format
 msgid "Detailed Tree View"
 msgstr "詳細樹狀檢視"
 
 #: filewidgets/kdiroperator.cpp:1966
 #, kde-format
 msgid "Show Hidden Files"
 msgstr "顯示隱藏檔案"
 
 #: filewidgets/kdiroperator.cpp:1971
 #, kde-format
 msgid "Show Aside Preview"
 msgstr "在旁邊顯示預覽"
 
 #: filewidgets/kdiroperator.cpp:1978
 #, kde-format
 msgid "Show Preview"
 msgstr "顯示預覽"
 
 #: filewidgets/kdiroperator.cpp:1983
 #, kde-format
 msgid "Open Containing Folder"
 msgstr "開啟包含資料夾"
 
 #: filewidgets/kdiroperator.cpp:1988 filewidgets/kfileplacesview.cpp:803
 #, kde-format
 msgid "Properties"
 msgstr "屬性"
 
 #: filewidgets/kdiroperator.cpp:1995
 #, kde-format
 msgid "&View"
 msgstr "檢視(&V)"
 
 #: filewidgets/kencodingfiledialog.cpp:88
 #, kde-format
 msgid "Encoding:"
 msgstr "編碼："
 
 #: filewidgets/kencodingfiledialog.cpp:144
 #: filewidgets/kencodingfiledialog.cpp:163
 #: filewidgets/kencodingfiledialog.cpp:181
 #: filewidgets/kencodingfiledialog.cpp:200 widgets/kurlrequesterdialog.cpp:118
 #, kde-format
 msgid "Open"
 msgstr "開啟"
 
 #: filewidgets/kencodingfiledialog.cpp:219
 #: filewidgets/kencodingfiledialog.cpp:242
 #, kde-format
 msgid "Save As"
 msgstr "另存新檔"
 
 #: filewidgets/kfilecopytomenu.cpp:81
 #, kde-format
 msgctxt "@title:menu"
 msgid "Copy To"
 msgstr "複製到"
 
 #: filewidgets/kfilecopytomenu.cpp:87
 #, kde-format
 msgctxt "@title:menu"
 msgid "Move To"
 msgstr "移至"
 
 #: filewidgets/kfilecopytomenu.cpp:111
 #, kde-format
 msgctxt "@title:menu"
 msgid "Home Folder"
 msgstr "家目錄"
 
 #: filewidgets/kfilecopytomenu.cpp:119
 #, kde-format
 msgctxt "@title:menu"
 msgid "Root Folder"
 msgstr "根目錄"
 
 #: filewidgets/kfilecopytomenu.cpp:154
 #, kde-format
 msgctxt "@title:menu in Copy To or Move To submenu"
 msgid "Browse..."
 msgstr "瀏覽..."
 
 #: filewidgets/kfilecopytomenu.cpp:235
 #, kde-format
 msgctxt "@title:menu"
 msgid "Copy Here"
 msgstr "複製到這裡"
 
 #: filewidgets/kfilecopytomenu.cpp:236
 #, kde-format
 msgctxt "@title:menu"
 msgid "Move Here"
 msgstr "移動到這裡"
 
 #: filewidgets/kfilefiltercombo.cpp:36 filewidgets/kfilewidget.cpp:1911
 #, kde-format
 msgid "*|All Files"
 msgstr "*|所有檔案"
 
 #: filewidgets/kfilefiltercombo.cpp:180
 #, kde-format
 msgid "All Supported Files"
 msgstr "所有支援的檔案"
 
 #: filewidgets/kfilefiltercombo.cpp:189
 #, kde-format
 msgid "All Files"
 msgstr "所有檔案"
 
 #: filewidgets/kfileplaceeditdialog.cpp:87
 #, kde-format
 msgid "Add Places Entry"
 msgstr "新增快速存取清單項目"
 
 #: filewidgets/kfileplaceeditdialog.cpp:89
 #, kde-format
 msgid "Edit Places Entry"
 msgstr "編輯快速存取清單項目"
 
 #: filewidgets/kfileplaceeditdialog.cpp:98
 #, kde-format
 msgid ""
 "<qt>This is the text that will appear in the Places panel.<br /><br />The "
 "label should consist of one or two words that will help you remember what "
 "this entry refers to. If you do not enter a label, it will be derived from "
 "the location's URL.</qt>"
 msgstr ""
 "<qt>這是會顯示在快速存取面板中的文字。<br /><br />此描述應該是一或兩個字的組"
 "合以協助您記得這個項目參考到何處。若您未輸入標籤，它會從此位置的網址取得。</"
 "qt>"
 
 #: filewidgets/kfileplaceeditdialog.cpp:104
 #, kde-format
 msgid "L&abel:"
 msgstr "標簽(&A):"
 
 #: filewidgets/kfileplaceeditdialog.cpp:106
 #, kde-format
 msgid "Enter descriptive label here"
 msgstr "請輸入描述標籤"
 
 #: filewidgets/kfileplaceeditdialog.cpp:110
 #, kde-format
 msgid ""
 "<qt>This is the location associated with the entry. Any valid URL may be "
 "used. For example:<br /><br />%1<br />http://www.kde.org<br />ftp://ftp.kde."
 "org/pub/kde/stable<br /><br />By clicking on the button next to the text "
 "edit box you can browse to an appropriate URL.</qt>"
 msgstr ""
 "<qt>這是此項目所關聯的位置。可以使用任何有效的網址。例如<br /><br />%1<br /"
 ">http://www.kde.org<br /> ftp://ftp.kde.org/pub/kde/stable<br /><br /> 按下文"
 "字編輯方塊旁邊的按鈕可以讓您瀏覽合適的網址。</qt>"
 
 #: filewidgets/kfileplaceeditdialog.cpp:116
 #, kde-format
 msgid "&Location:"
 msgstr "位置(&L)："
 
 #: filewidgets/kfileplaceeditdialog.cpp:123
 #, kde-format
 msgid ""
 "<qt>This is the icon that will appear in the Places panel.<br /><br />Click "
 "on the button to select a different icon.</qt>"
 msgstr ""
 "<qt>這是會顯示在快速存取面板中的圖示。<br /><br />按下按鈕以選擇不同的圖示。"
 "</qt>"
 
 #: filewidgets/kfileplaceeditdialog.cpp:126
 #, kde-format
 msgid "Choose an &icon:"
 msgstr "選擇圖示(&I)："
 
 #: filewidgets/kfileplaceeditdialog.cpp:145
 #, kde-format
 msgid "&Only show when using this application (%1)"
 msgstr "只在使用這個應用程式 (%1) 時顯示(&O)"
 
 #: filewidgets/kfileplaceeditdialog.cpp:147
 #, kde-format
 msgid ""
 "<qt>Select this setting if you want this entry to show only when using the "
 "current application (%1).<br /><br />If this setting is not selected, the "
 "entry will be available in all applications.</qt>"
 msgstr ""
 "<qt>如果您希望這個項目只在使用目前的應用程式 (%1) 時顯示，請選擇此設定。\n"
 "<br /><br />如果沒有選取這項設定，該項目將在所有應用程式中顯示。</qt>"
 
 #: filewidgets/kfileplacesitem.cpp:107
 #, kde-format
 msgctxt "@item"
 msgid "Places"
 msgstr "書籤"
 
 #: filewidgets/kfileplacesitem.cpp:110
 #, kde-format
 msgctxt "@item"
 msgid "Remote"
 msgstr "遠端"
 
 #: filewidgets/kfileplacesitem.cpp:113
 #, kde-format
 msgctxt "@item"
 msgid "Recently Saved"
 msgstr "最近儲存"
 
 #: filewidgets/kfileplacesitem.cpp:116
 #, kde-format
 msgctxt "@item"
 msgid "Search For"
 msgstr "搜尋"
 
 #: filewidgets/kfileplacesitem.cpp:119
 #, kde-format
 msgctxt "@item"
 msgid "Devices"
 msgstr "裝置"
 
 #: filewidgets/kfileplacesitem.cpp:122
 #, kde-format
 msgctxt "@item"
 msgid "Removable Devices"
 msgstr "可移除裝置"
 
 #: filewidgets/kfileplacesmodel.cpp:231
 #, kde-format
 msgctxt "KFile System Bookmarks"
 msgid "Home"
 msgstr "家目錄"
 
 #: filewidgets/kfileplacesmodel.cpp:239
 #, kde-format
 msgctxt "KFile System Bookmarks"
 msgid "Desktop"
 msgstr "桌面"
 
 #: filewidgets/kfileplacesmodel.cpp:245
 #, kde-format
 msgctxt "KFile System Bookmarks"
 msgid "Downloads"
 msgstr "下載"
 
 #: filewidgets/kfileplacesmodel.cpp:250
 #, kde-format
 msgctxt "KFile System Bookmarks"
 msgid "Network"
 msgstr "網路"
 
 #: filewidgets/kfileplacesmodel.cpp:262
 #, kde-format
 msgctxt "KFile System Bookmarks"
 msgid "Root"
 msgstr "根目錄"
 
 #: filewidgets/kfileplacesmodel.cpp:266
 #, kde-format
 msgctxt "KFile System Bookmarks"
 msgid "Trash"
 msgstr "垃圾桶"
 
 #: filewidgets/kfileplacesmodel.cpp:286
 #, kde-format
 msgctxt "KFile System Bookmarks"
 msgid "Today"
 msgstr "今天"
 
 #: filewidgets/kfileplacesmodel.cpp:289
 #, kde-format
 msgctxt "KFile System Bookmarks"
 msgid "Yesterday"
 msgstr "昨天"
 
 #: filewidgets/kfileplacesmodel.cpp:292
 #, kde-format
 msgctxt "KFile System Bookmarks"
 msgid "Documents"
 msgstr "文件"
 
 #: filewidgets/kfileplacesmodel.cpp:295
 #, kde-format
 msgctxt "KFile System Bookmarks"
 msgid "Images"
 msgstr "影像"
 
 #: filewidgets/kfileplacesmodel.cpp:298
 #, kde-format
 msgctxt "KFile System Bookmarks"
 msgid "Audio Files"
 msgstr "音訊檔案"
 
 #: filewidgets/kfileplacesmodel.cpp:301
 #, kde-format
 msgctxt "KFile System Bookmarks"
 msgid "Videos"
 msgstr "影片"
 
 #: filewidgets/kfileplacesmodel.cpp:1156
 #, kde-format
 msgid "&Release '%1'"
 msgstr "釋出 %1(&R)"
 
 #: filewidgets/kfileplacesmodel.cpp:1158
 #, kde-format
 msgid "&Safely Remove '%1'"
 msgstr "安全地移除 %1(&S)"
 
 #: filewidgets/kfileplacesmodel.cpp:1161
 #, kde-format
 msgid "&Unmount '%1'"
 msgstr "卸載 %1(&U)"
 
 #: filewidgets/kfileplacesmodel.cpp:1182
 #, kde-format
 msgid "&Eject '%1'"
 msgstr "跳出 %1(&E)"
 
 #: filewidgets/kfileplacesmodel.cpp:1216
 #, kde-format
 msgid "The device '%1' is not a disk and cannot be ejected."
 msgstr "裝置 %1 不是光碟機，無法跳出。"
 
 #: filewidgets/kfileplacesmodel.cpp:1252
 #, kde-format
 msgid "An error occurred while accessing '%1', the system responded: %2"
 msgstr "存取 %1 時發生錯誤，系統訊息：%2"
 
 #: filewidgets/kfileplacesmodel.cpp:1256
 #, kde-format
 msgid "An error occurred while accessing '%1'"
 msgstr "存取 %1 時發生錯誤"
 
 #: filewidgets/kfileplacesview.cpp:436
 #, kde-format
 msgid "%1 (hidden)"
 msgstr "%1（隱藏）"
 
 #: filewidgets/kfileplacesview.cpp:754
 #, kde-format
 msgid "Hide Section"
 msgstr "隱藏區段"
 
 #: filewidgets/kfileplacesview.cpp:761
 #, kde-format
 msgctxt "@action:inmenu"
 msgid "Empty Trash"
 msgstr "清空垃圾桶"
 
 #: filewidgets/kfileplacesview.cpp:766 filewidgets/kfileplacesview.cpp:800
 #: filewidgets/kfileplacesview.cpp:816 widgets/kacleditwidget.cpp:97
 #, kde-format
 msgid "Add Entry..."
 msgstr "新增項目..."
 
 #: filewidgets/kfileplacesview.cpp:792
 #, kde-format
 msgctxt "@action:inmenu"
 msgid "Mount"
 msgstr "掛載"
 
 #: filewidgets/kfileplacesview.cpp:806
 #, kde-format
 msgid "&Edit Entry '%1'..."
 msgstr "編輯項目 '%1'(&E)..."
 
 #: filewidgets/kfileplacesview.cpp:809
 #, kde-format
 msgid "&Hide Entry '%1'"
 msgstr "隱藏項目 '%1'(&H)"
 
 #: filewidgets/kfileplacesview.cpp:821
 #, kde-format
 msgid "&Show All Entries"
 msgstr "顯示所有項目(&S)"
 
 #: filewidgets/kfileplacesview.cpp:832
 #, kde-format
 msgid "&Remove Entry '%1'"
 msgstr "移除項目 '%1'(&R)"
 
 #: filewidgets/kfilewidget.cpp:303
 #, kde-format
 msgid ""
 "<qt>While typing in the text area, you may be presented with possible "
 "matches. This feature can be controlled by clicking with the right mouse "
 "button and selecting a preferred mode from the <b>Text Completion</b> menu.</"
 "qt>"
 msgstr ""
 "<qt>在文字區輸入時，您會看到可能的相符項目。這項功能可以按滑鼠右鍵從<b>文字補"
 "齊</b>選單選擇您所偏好的模式來控制。</qt>"
 
 #: filewidgets/kfilewidget.cpp:403
 #, kde-format
 msgid "Drive: %1"
 msgstr "磁碟：%1"
 
 #: filewidgets/kfilewidget.cpp:459
 #, kde-format
 msgid ""
 "<qt>Click this button to enter the parent folder.<br /><br />For instance, "
 "if the current location is file:/home/konqi clicking this button will take "
 "you to file:/home.</qt>"
 msgstr ""
 "<qt>按這個按鈕來進入上一層目錄。<br /><br />例如，如果目前位置是 file:/home/"
 "konqi，按這個按鈕將把您帶到  file:/home。</qt>"
 
 #: filewidgets/kfilewidget.cpp:463
 #, kde-format
 msgid "Click this button to move backwards one step in the browsing history."
 msgstr "按這個按鈕在瀏覽歷史中向後移動一步。"
 
 #: filewidgets/kfilewidget.cpp:464
 #, kde-format
 msgid "Click this button to move forward one step in the browsing history."
 msgstr "按這個按鈕在瀏覽歷史中向前移動一步。"
 
 #: filewidgets/kfilewidget.cpp:466
 #, kde-format
 msgid "Click this button to reload the contents of the current location."
 msgstr "按這個按鈕來重新載入目前位置的內容。"
 
 #: filewidgets/kfilewidget.cpp:468
 #, kde-format
 msgid "Click this button to create a new folder."
 msgstr "按這個按鈕來建立新資料夾。"
 
 #: filewidgets/kfilewidget.cpp:474
 #, kde-format
 msgid "Show Places Navigation Panel"
 msgstr "顯示快速存取導覽面板"
 
 #: filewidgets/kfilewidget.cpp:481
 #, kde-format
 msgid "Show Bookmarks"
 msgstr "顯示書籤"
 
 #: filewidgets/kfilewidget.cpp:486
 #, kde-format
 msgid "Options"
 msgstr "選項"
 
 #: filewidgets/kfilewidget.cpp:488
 #, kde-format
 msgid ""
 "<qt>This is the preferences menu for the file dialog. Various options can be "
 "accessed from this menu including: <ul><li>how files are sorted in the list</"
 "li><li>types of view, including icon and list</li><li>showing of hidden "
 "files</li><li>the Places navigation panel</li><li>file previews</"
 "li><li>separating folders from files</li></ul></qt>"
 msgstr ""
 "<qt>這是檔案對話方塊的組態設定選單。此選單中可存取的各種選項包括：<ul><li>清"
 "單中的檔案如何排序</li><li>檢視類型，包括圖示和列表</li><li>隱藏檔案的顯示</"
 "li><li>快速存取導覽面板</li><li>檔案預覽</li><li>區分檔案和目錄</li></ul></"
 "qt>"
 
 #: filewidgets/kfilewidget.cpp:529
 #, kde-format
 msgid "Zoom out"
 msgstr "縮小"
 
 #: filewidgets/kfilewidget.cpp:531
 #, kde-format
 msgid "Zoom in"
 msgstr "放大"
 
 #. i18n: ectx: property (text), widget (QLabel, nameLabel)
 #: filewidgets/kfilewidget.cpp:567 widgets/kpropertiesdesktopbase.ui:17
 #, kde-format
 msgid "&Name:"
 msgstr "名稱(&N):"
 
 #: filewidgets/kfilewidget.cpp:590
 #, kde-format
 msgid ""
 "<qt>This is the filter to apply to the file list. File names that do not "
 "match the filter will not be shown.<p>You may select from one of the preset "
 "filters in the drop down menu, or you may enter a custom filter directly "
 "into the text area.</p><p>Wildcards such as * and ? are allowed.</p></qt>"
 msgstr ""
 "<qt>這是應用到檔案清單的篩選器。不符合該篩選器的檔案名稱將不會被顯示。<p>您可"
 "以從下拉選單中選擇預設的篩選器，或者直接在文字區域中輸入自訂的篩選器。</p><p>"
 "允許使用 * 和 ? 萬用字元。</p></qt>"
 
 #: filewidgets/kfilewidget.cpp:596
 #, kde-format
 msgid "&Filter:"
 msgstr "篩選器(&F)："
 
 #: filewidgets/kfilewidget.cpp:843
 #, kde-format
 msgid "You can only select one file"
 msgstr "您只能選取一個檔案。"
 
 #: filewidgets/kfilewidget.cpp:844
 #, kde-format
 msgid "More than one file provided"
 msgstr "選擇了多個檔案"
 
 #: filewidgets/kfilewidget.cpp:1011
 #, kde-format
 msgid "You can only select local files"
 msgstr "您只能選取本地檔案。"
 
 #: filewidgets/kfilewidget.cpp:1012
 #, kde-format
 msgid "Remote files not accepted"
 msgstr "不接受遠端檔案"
 
 #: filewidgets/kfilewidget.cpp:1019
 #, kde-format
 msgid ""
 "The selected URL uses an unsupported scheme. Please use the following "
 "scheme: %2"
 msgid_plural ""
 "The selected URL uses an unsupported scheme. Please use one of the following "
 "schemes: %2"
 msgstr[0] "選定的 URL 使用了不支援的機制。請使用下列其中一種機制：%2"
 
 #: filewidgets/kfilewidget.cpp:1025
 #, kde-format
 msgid "Unsupported URL scheme"
 msgstr "不支援的 URL 機制"
 
 #: filewidgets/kfilewidget.cpp:1040
 #, kde-format
 msgid ""
 "More than one folder has been selected and this dialog does not accept "
 "folders, so it is not possible to decide which one to enter. Please select "
 "only one folder to list it."
 msgstr ""
 "您選取了一個以上的資料夾，此對話框不接受多個資料夾，所以無法決定要用哪一個。"
 "請只選擇一個資料夾即可。"
 
 #: filewidgets/kfilewidget.cpp:1040
 #, kde-format
 msgid "More than one folder provided"
 msgstr "提供了多個資料夾"
 
 #: filewidgets/kfilewidget.cpp:1048
 #, kde-format
 msgid ""
 "At least one folder and one file has been selected. Selected files will be "
 "ignored and the selected folder will be listed"
-msgstr ""
-"您至少選擇了一個資料夾與一個檔案。選取的檔案會被忽略，而選取的資料夾會被列出"
+msgstr "您至少選擇了一個資料夾與一個檔案。選取的檔案會被忽略，而選取的資料夾會被列出"
 
 #: filewidgets/kfilewidget.cpp:1048
 #, kde-format
 msgid "Files and folders selected"
 msgstr "選取了檔案與資料夾"
 
 #: filewidgets/kfilewidget.cpp:1066
 #, kde-format
 msgid "The file \"%1\" could not be found"
 msgstr "找不到檔案 %1"
 
 #: filewidgets/kfilewidget.cpp:1066
 #, kde-format
 msgid "Cannot open file"
 msgstr "無法開啟檔案"
 
 #: filewidgets/kfilewidget.cpp:1344
 #, kde-format
 msgid "This is the name to save the file as."
 msgstr "這是儲存檔案時所用的名稱。"
 
 #: filewidgets/kfilewidget.cpp:1347
 #, kde-format
 msgid ""
 "This is the list of files to open. More than one file can be specified by "
 "listing several files, separated by spaces."
 msgstr "這是要開啟的檔案清單。如果想要指定多個檔案，可以用空格分隔。"
 
 #: filewidgets/kfilewidget.cpp:1352
 #, kde-format
 msgid "This is the name of the file to open."
 msgstr "這是要開啟的檔案的名稱。"
 
 #: filewidgets/kfilewidget.cpp:1366
 #, kde-format
 msgctxt "@title:window"
 msgid "Places"
 msgstr "書籤"
 
 #: filewidgets/kfilewidget.cpp:1574
 #, kde-format
 msgid "The file \"%1\" already exists. Do you wish to overwrite it?"
 msgstr "檔案 %1 已存在。您希望覆寫它嗎？"
 
 #: filewidgets/kfilewidget.cpp:1575
 #, kde-format
 msgid "Overwrite File?"
 msgstr "要覆寫檔案嗎？"
 
 #: filewidgets/kfilewidget.cpp:1717
 #, kde-format
 msgid ""
 "The chosen filenames do not\n"
 "appear to be valid."
 msgstr ""
 "所選取的檔案名稱\n"
 "大豆豆豆得豆得豆豆都似乎無效。"
 
 #: filewidgets/kfilewidget.cpp:1719
 #, kde-format
 msgid "Invalid Filenames"
 msgstr "無效的檔名"
 
 #: filewidgets/kfilewidget.cpp:1804
 #, kde-format
 msgid "You can only select local files."
 msgstr "您只能選取本地檔案。"
 
 #: filewidgets/kfilewidget.cpp:1805
 #, kde-format
 msgid "Remote Files Not Accepted"
 msgstr "不接受遠端檔案"
 
 #: filewidgets/kfilewidget.cpp:1909
 #, kde-format
 msgid "*|All Folders"
 msgstr "*|所有資料夾"
 
 #: filewidgets/kfilewidget.cpp:2073 widgets/executablefileopendialog.cpp:38
 #: widgets/kfileitemactions.cpp:640
 #, kde-format
 msgid "&Open"
 msgstr "開啟(&O)"
 
 #: filewidgets/kfilewidget.cpp:2167
 #, kde-format
 msgid "Icon size: %1 pixels (standard size)"
 msgstr "圖示大小：%1 像素（標準大小）"
 
 #: filewidgets/kfilewidget.cpp:2170
 #, kde-format
 msgid "Icon size: %1 pixels"
 msgstr "圖示大小：%1 像素"
 
 #: filewidgets/kfilewidget.cpp:2317
 #, kde-format
 msgid "Automatically select filename e&xtension (%1)"
 msgstr "自動選擇檔案名稱延伸檔名(&X)[%1]"
 
 #: filewidgets/kfilewidget.cpp:2318
 #, kde-format
 msgid "the extension <b>%1</b>"
 msgstr "延伸檔名 <b>%1</b>"
 
 #: filewidgets/kfilewidget.cpp:2324
 #, kde-format
 msgid "Automatically select filename e&xtension"
 msgstr "自動選擇檔案名稱延伸檔名(&X)"
 
 #: filewidgets/kfilewidget.cpp:2325
 #, kde-format
 msgid "a suitable extension"
 msgstr "合適的延伸檔名"
 
 #: filewidgets/kfilewidget.cpp:2334
 #, kde-format
 msgid ""
 "This option enables some convenient features for saving files with "
 "extensions:<br /><ol><li>Any extension specified in the <b>%1</b> text area "
 "will be updated if you change the file type to save in.<br /><br /></"
 "li><li>If no extension is specified in the <b>%2</b> text area when you "
 "click <b>Save</b>, %3 will be added to the end of the filename (if the "
 "filename does not already exist). This extension is based on the file type "
 "that you have chosen to save in.<br /><br />If you do not want KDE to supply "
 "an extension for the filename, you can either turn this option off or you "
 "can suppress it by adding a period (.) to the end of the filename (the "
 "period will be automatically removed).</li></ol>If unsure, keep this option "
 "enabled as it makes your files more manageable."
 msgstr ""
 "這個選項啟用了一些儲存檔案名稱與延伸檔名的便利功能：<br /><ol><li>如果您改變"
 "了要儲存的檔案類型，任何在 <b>%1</b> 文字區域指定的延伸檔名都會被更新。<br /"
 "><br /></li><li>當您按下<b>儲存</b>時，如果在 <b>%2</b> 文字區域中沒有指定延"
 "伸檔名，%3 會被加到檔案名稱的結尾（如果檔案名稱尚未存在）。這個延伸檔名是根據"
 "您選擇儲存的檔案類型而定。<br /><br />如果你不想要 KDE 提供任何延伸檔名，您可"
 "以將此選項關閉或者您可以在檔案名稱的結尾加上句點(.)來限制它（這個句點會自動被"
 "移除）。</li></ol>如果不確定，保持啟用此選項，因為它會讓您的檔案更容易管理。"
 
 #: filewidgets/kfilewidget.cpp:2644
 #, kde-format
 msgid "Bookmarks"
 msgstr "書籤"
 
 #: filewidgets/kfilewidget.cpp:2648
 #, kde-format
 msgid ""
 "<qt>This button allows you to bookmark specific locations. Click on this "
 "button to open the bookmark menu where you may add, edit or select a "
 "bookmark.<br /><br />These bookmarks are specific to the file dialog, but "
 "otherwise operate like bookmarks elsewhere in KDE.</qt>"
 msgstr ""
 "<qt>這個按鈕可以讓您將指定位置加入書籤。按這個按鈕將打開書籤選單，其中您可以"
 "添加、編輯或選擇書籤。<br /><br />這些書籤專用於檔案對話方塊，但是可以像 KDE "
 "其他地方的書籤一樣操作。</qt>"
 
 #: filewidgets/knewfilemenu.cpp:389
 #, kde-format
 msgid "Sorry"
 msgstr "抱歉"
 
 #: filewidgets/knewfilemenu.cpp:398
 #, kde-format
 msgid "<qt>The template file <b>%1</b> does not exist.</qt>"
 msgstr "<qt>樣本檔 <b>%1</b> 不存在。</qt>"
 
 #: filewidgets/knewfilemenu.cpp:416
 #, kde-format
 msgctxt "@action:button"
 msgid "Create directory"
 msgstr "建立目錄"
 
 #: filewidgets/knewfilemenu.cpp:418 filewidgets/knewfilemenu.cpp:867
 #, kde-format
 msgctxt "@action:button"
 msgid "Enter a Different Name"
 msgstr "輸入別的名稱"
 
 #: filewidgets/knewfilemenu.cpp:422
 #, kde-format
 msgid "Create hidden directory?"
 msgstr "確定要建立隱藏目錄嗎？"
 
 #: filewidgets/knewfilemenu.cpp:432
 #, kde-format
 msgid ""
 "The name \"%1\" starts with a dot, so the directory will be hidden by "
 "default."
 msgstr "名稱 %1 是用點 (.) 開頭的，預設會被隱藏起來。 "
 
 #: filewidgets/knewfilemenu.cpp:434 widgets/executablefileopendialog.cpp:36
 #, kde-format
 msgid "Do not ask again"
 msgstr "不要再詢問"
 
 #: filewidgets/knewfilemenu.cpp:546 filewidgets/knewfilemenu.cpp:627
 #, kde-format
 msgid "File name:"
 msgstr "檔案名稱："
 
 #: filewidgets/knewfilemenu.cpp:631
 #, kde-format
 msgid "Create link to URL"
 msgstr "建立網址連結"
 
 #: filewidgets/knewfilemenu.cpp:677 filewidgets/knewfilemenu.cpp:734
 #, kde-format
 msgctxt "@item:inmenu Create New"
 msgid "%1"
 msgstr "%1"
 
 #: filewidgets/knewfilemenu.cpp:871
 #, kde-format
 msgid "Invalid Directory Name"
 msgstr "無效的目錄名稱"
 
 #: filewidgets/knewfilemenu.cpp:880
 #, kde-kuit-format
 msgctxt "@info"
 msgid ""
 "Could not create a folder with the name <filename>%1</filename><nl/>because "
 "it is reserved for use by the operating system."
 msgstr ""
 "無法建立檔名為 <filename>%1</filename> 的資料夾，<nl/>因為這個檔案名稱被作業"
 "系統作為保留用途。"
 
 #: filewidgets/knewfilemenu.cpp:1140
 #, kde-format
 msgid "Create New"
 msgstr "新增"
 
 #: filewidgets/knewfilemenu.cpp:1155
 #, kde-format
 msgid "Link to Device"
 msgstr "連結到裝置"
 
 #: filewidgets/knewfilemenu.cpp:1209
 #, kde-format
 msgctxt "Default name for a new folder"
 msgid "New Folder"
 msgstr "新資料夾"
 
 #: filewidgets/knewfilemenu.cpp:1219
 #, kde-format
 msgctxt "@title:window"
 msgid "New Folder"
 msgstr "新資料夾"
 
 #: filewidgets/knewfilemenu.cpp:1222
 #, kde-format
 msgid ""
 "Create new folder in:\n"
 "%1"
 msgstr ""
 "建立新資料夾於：\n"
 "%1"
 
 #: filewidgets/kstatusbarofflineindicator.cpp:55
 #, kde-format
 msgid "The desktop is offline"
 msgstr "桌面已離線"
 
 #. i18n: ectx: property (text), widget (QPushButton, md5CopyButton)
 #. i18n: ectx: property (text), widget (QPushButton, sha1CopyButton)
 #. i18n: ectx: property (text), widget (QPushButton, sha256CopyButton)
 #: filewidgets/kurlnavigator.cpp:468 widgets/checksumswidget.ui:111
 #: widgets/checksumswidget.ui:149 widgets/checksumswidget.ui:187
 #, kde-format
 msgid "Copy"
 msgstr "複製"
 
 #. i18n: ectx: property (text), widget (QPushButton, pasteButton)
 #: filewidgets/kurlnavigator.cpp:472 widgets/checksumswidget.ui:39
 #, kde-format
 msgid "Paste"
 msgstr "貼上"
 
 #: filewidgets/kurlnavigator.cpp:483
 #, kde-format
 msgid "Open %1 in tab"
 msgstr "在分頁打開 %1"
 
 #: filewidgets/kurlnavigator.cpp:491
 #, kde-format
 msgid "Edit"
 msgstr "編輯"
 
 #: filewidgets/kurlnavigator.cpp:494
 #, kde-format
 msgid "Navigate"
 msgstr "導覽"
 
 #: filewidgets/kurlnavigator.cpp:509
 #, kde-format
 msgid "Show Full Path"
 msgstr "顯示完整路徑"
 
 #: filewidgets/kurlnavigator.cpp:757
 #, kde-format
 msgid "Custom Path"
 msgstr "自訂路徑"
 
 #: filewidgets/kurlnavigatorbutton.cpp:694
 #, kde-format
 msgctxt "@action:inmenu"
 msgid "More"
 msgstr "更多"
 
 #: filewidgets/kurlnavigatorprotocolcombo.cpp:174
 #, kde-format
 msgctxt "@item:inmenu"
 msgid "Devices"
 msgstr "裝置"
 
 #: filewidgets/kurlnavigatorprotocolcombo.cpp:178
 #, kde-format
 msgctxt "@item:inmenu"
 msgid "Subversion"
 msgstr "Subversion"
 
 #: filewidgets/kurlnavigatorprotocolcombo.cpp:182
 #, kde-format
 msgctxt "@item:inmenu"
 msgid "Other"
 msgstr "其他"
 
 #: filewidgets/kurlnavigatortogglebutton.cpp:43
 #, kde-format
 msgid "Edit mode"
 msgstr "編輯模式"
 
 #: filewidgets/kurlnavigatortogglebutton.cpp:96
 #, kde-format
 msgid "Click for Location Navigation"
 msgstr "點選位置導覽"
 
 #: filewidgets/kurlnavigatortogglebutton.cpp:98
 #, kde-format
 msgid "Click to Edit Location"
 msgstr "點選以編輯位置"
 
 #: gui/faviconrequestjob.cpp:122
 #, kde-format
 msgid "No favicon found for %1"
 msgstr "找不到 %1 的 favicon"
 
 #: gui/faviconrequestjob.cpp:171
 #, kde-format
 msgid "Error saving image to %1"
 msgstr "儲存圖片到 %1 時發生錯誤。"
 
 #: gui/faviconrequestjob.cpp:181
 #, kde-format
 msgid "Icon file too big, download aborted"
 msgstr "圖示檔案太大了，放棄下載"
 
 #: ioslaves/file/file.cpp:242
 #, kde-format
 msgid "Setting ACL for %1"
 msgstr "設定 %1 的權限控制列表"
 
 #: ioslaves/file/file.cpp:768
 #, kde-format
 msgid ""
 "Could not change permissions for\n"
 "%1"
 msgstr ""
 "無法變更該權限\n"
 "%1"
 
 #: ioslaves/file/file.cpp:1034
 #, kde-format
 msgid "No Media inserted or Media not recognized."
 msgstr "沒有插入媒體，或無法辨認媒體。"
 
 #: ioslaves/file/file.cpp:1043 ioslaves/file/file.cpp:1237
 #, kde-format
 msgid "\"vold\" is not running."
 msgstr "\"vold\"未執行。"
 
 #: ioslaves/file/file.cpp:1074
 #, kde-format
 msgid "Could not find program \"mount\""
 msgstr "找不到 mount 程式"
 
 #: ioslaves/file/file.cpp:1143
 #, kde-format
 msgid "mounting is not supported by wince."
 msgstr "wince 不支援掛載。"
 
 #: ioslaves/file/file.cpp:1248
 #, kde-format
 msgid "Could not find program \"umount\""
 msgstr "找不到 umount 程式"
 
 #: ioslaves/file/file.cpp:1263
 #, kde-format
 msgid "unmounting is not supported by wince."
 msgstr "wince 不支援卸載。"
 
 #: ioslaves/file/file_unix.cpp:295
 #, kde-format
 msgid "Cannot copy file from %1 to %2. (Errno: %3)"
 msgstr "無法複製檔案從 %1 到 %2（錯誤代碼：%3）"
 
 #: ioslaves/file/file_unix.cpp:381
 #, kde-format
 msgid "Could not change permissions for '%1'"
 msgstr "無法變更 %1 的權限。"
 
 #: ioslaves/file/file_unix.cpp:515
 #, kde-format
 msgid "No media in device for %1"
 msgstr "沒有 %1 的媒體於裝置中"
 
 #: ioslaves/file/file_unix.cpp:787
 #, kde-format
 msgid "Could not get user id for given user name %1"
 msgstr "無法取得使用者 %1 的代碼。"
 
 #: ioslaves/file/file_unix.cpp:800
 #, kde-format
 msgid "Could not get group id for given group name %1"
 msgstr "無法取得群組 %1 的代碼。"
 
 #: ioslaves/ftp/ftp.cpp:359
 #, kde-format
 msgid "Opening connection to host %1"
 msgstr "開啟連線到主機 %1"
 
 #: ioslaves/ftp/ftp.cpp:374
 #, kde-format
 msgid "Connected to host %1"
 msgstr "連線到主機 %1"
 
 #: ioslaves/ftp/ftp.cpp:484
 #, kde-format
 msgid "%1 (Error %2)"
 msgstr "%1 (錯誤 %2)"
 
 #: ioslaves/ftp/ftp.cpp:514
 #, kde-format
 msgid "Sending login information"
 msgstr "送出登入資訊"
 
 #: ioslaves/ftp/ftp.cpp:572
 #, kde-format
 msgid ""
 "Message sent:\n"
 "Login using username=%1 and password=[hidden]\n"
 "\n"
 "Server replied:\n"
 "%2\n"
 "\n"
 msgstr ""
 "送出的訊息：\n"
 "以使用者名稱=%1 和密碼=[hidden] 登入\n"
 "\n"
 "伺服器回應：\n"
 "%2\n"
 "\n"
 
 #: ioslaves/ftp/ftp.cpp:581 ioslaves/http/http.cpp:5342
 #, kde-format
 msgid "You need to supply a username and a password to access this site."
 msgstr "您必須提供一組使用者名稱和密碼來存取這個網站。"
 
 #: ioslaves/ftp/ftp.cpp:583 ioslaves/http/http.cpp:5344
 #, kde-format
 msgid "Site:"
 msgstr "網站:"
 
 #: ioslaves/ftp/ftp.cpp:584
 #, kde-format
 msgid "<b>%1</b>"
 msgstr "<b>%1</b>"
 
 #: ioslaves/ftp/ftp.cpp:668
 #, kde-format
 msgid "Login OK"
 msgstr "登入成功"
 
 #: ioslaves/ftp/ftp.cpp:697
 #, kde-format
 msgid "Could not login to %1."
 msgstr "無法登入 %1。"
 
 #: ioslaves/ftp/ftp.cpp:2592 ioslaves/http/http.cpp:5223
 #: ioslaves/http/http.cpp:5356
 #, kde-format
 msgid ""
 "You need to supply a username and a password for the proxy server listed "
 "below before you are allowed to access any sites."
-msgstr ""
-"您必須為下列的代理伺服器提供一組使用者名稱和密碼，才能夠取得存取網站的權限。"
+msgstr "您必須為下列的代理伺服器提供一組使用者名稱和密碼，才能夠取得存取網站的權限。"
 
 #: ioslaves/ftp/ftp.cpp:2596 ioslaves/http/http.cpp:5227
 #: ioslaves/http/http.cpp:5359
 #, kde-format
 msgid "Proxy:"
 msgstr "代理伺服器:"
 
 #: ioslaves/ftp/ftp.cpp:2597 ioslaves/http/http.cpp:5228
 #: ioslaves/http/http.cpp:5465
 #, kde-format
 msgid "<b>%1</b> at <b>%2</b>"
 msgstr "<b>%1</b> 在 <b>%2</b>"
 
 #: ioslaves/ftp/ftp.cpp:2598 ioslaves/http/http.cpp:5230
 #: ioslaves/http/http.cpp:5376
 #, kde-format
 msgid "Proxy Authentication Failed."
 msgstr "代理伺服器認證失敗。"
 
 #: ioslaves/help/kio_help.cpp:127
 #, kde-format
 msgid "There is no documentation available for %1."
 msgstr "沒有 %1 的說明文件"
 
 #: ioslaves/help/kio_help.cpp:175
 #, kde-format
 msgid "Looking up correct file"
 msgstr "尋找正確檔案"
 
 #: ioslaves/help/kio_help.cpp:225
 #, kde-format
 msgid "Preparing document"
 msgstr "正在準備文件"
 
 #: ioslaves/help/kio_help.cpp:235 ioslaves/help/kio_help.cpp:280
 #, kde-format
 msgid "The requested help file could not be parsed:<br />%1"
 msgstr "要求的說明檔案無法解讀：<br />%1"
 
 #: ioslaves/help/kio_help.cpp:257
 #, kde-format
 msgid "Saving to cache"
 msgstr "存到快取中"
 
 #: ioslaves/help/kio_help.cpp:274
 #, kde-format
 msgid "Using cached version"
 msgstr "使用快取版本的檔案"
 
 #: ioslaves/help/kio_help.cpp:336
 #, kde-format
 msgid "Looking up section"
 msgstr "正在找尋段落"
 
 #: ioslaves/help/kio_help.cpp:343
 #, kde-format
 msgid "Could not find filename %1 in %2."
 msgstr "在%2當中找不到名稱為 %1 的檔案。"
 
 #: ioslaves/http/http.cpp:598
 #, kde-format
 msgid "No host specified."
 msgstr "沒有指定主機。"
 
 #: ioslaves/http/http.cpp:1554
 #, kde-format
 msgid "Otherwise, the request would have succeeded."
 msgstr "否則，該請求就已經成功了。"
 
 #: ioslaves/http/http.cpp:1558
 #, kde-format
 msgctxt "request type"
 msgid "retrieve property values"
 msgstr "接收屬性數值"
 
 #: ioslaves/http/http.cpp:1561
 #, kde-format
 msgctxt "request type"
 msgid "set property values"
 msgstr "設定屬性數值"
 
 #: ioslaves/http/http.cpp:1564
 #, kde-format
 msgctxt "request type"
 msgid "create the requested folder"
 msgstr "建立所請求的資料夾"
 
 #: ioslaves/http/http.cpp:1567
 #, kde-format
 msgctxt "request type"
 msgid "copy the specified file or folder"
 msgstr "複製指定的檔案或資料夾"
 
 #: ioslaves/http/http.cpp:1570
 #, kde-format
 msgctxt "request type"
 msgid "move the specified file or folder"
 msgstr "搬移指定的檔案或資料夾"
 
 #: ioslaves/http/http.cpp:1573
 #, kde-format
 msgctxt "request type"
 msgid "search in the specified folder"
 msgstr "在指定的資料夾搜尋"
 
 #: ioslaves/http/http.cpp:1576
 #, kde-format
 msgctxt "request type"
 msgid "lock the specified file or folder"
 msgstr "鎖住指定的檔案或資料夾"
 
 #: ioslaves/http/http.cpp:1579
 #, kde-format
 msgctxt "request type"
 msgid "unlock the specified file or folder"
 msgstr "解除鎖定指定的檔案或資料夾"
 
 #: ioslaves/http/http.cpp:1582
 #, kde-format
 msgctxt "request type"
 msgid "delete the specified file or folder"
 msgstr "刪除指定的檔案或資料夾"
 
 #: ioslaves/http/http.cpp:1585
 #, kde-format
 msgctxt "request type"
 msgid "query the server's capabilities"
 msgstr "查詢伺服器的性能"
 
 #: ioslaves/http/http.cpp:1588
 #, kde-format
 msgctxt "request type"
 msgid "retrieve the contents of the specified file or folder"
 msgstr "接收所指定的檔案或資料夾的內容"
 
 #: ioslaves/http/http.cpp:1591
 #, kde-format
 msgctxt "request type"
 msgid "run a report in the specified folder"
 msgstr "在指定的資料夾執行報告"
 
 #: ioslaves/http/http.cpp:1602
 #, kde-format
 msgctxt "%1: code, %2: request type"
 msgid "An unexpected error (%1) occurred while attempting to %2."
 msgstr "在連線到 %2 發生了非預期的錯誤 (%1)。"
 
 #: ioslaves/http/http.cpp:1609
 #, kde-format
 msgid "The server does not support the WebDAV protocol."
 msgstr "對方伺服器並不支援 WebDAV 通訊協定。"
 
 #: ioslaves/http/http.cpp:1650
 #, kde-format
 msgctxt "%1: request type, %2: url"
 msgid ""
 "An error occurred while attempting to %1, %2. A summary of the reasons is "
 "below."
 msgstr "在連線到 %2 要求 %1 時發生錯誤。錯誤原因如下。"
 
 #: ioslaves/http/http.cpp:1666 ioslaves/http/http.cpp:1799
 #, kde-format
 msgctxt "%1: request type"
 msgid "Access was denied while attempting to %1."
 msgstr "連線到 %1 被拒絕，存取失敗。"
 
 #: ioslaves/http/http.cpp:1679 ioslaves/http/http.cpp:1805
 #, kde-format
 msgid ""
 "A resource cannot be created at the destination until one or more "
 "intermediate collections (folders) have been created."
 msgstr "資源無法在目標被建立，直到一個或多個中間集合(資料夾)已經被建立之後。"
 
 #: ioslaves/http/http.cpp:1687
 #, kde-format
 msgid ""
 "The server was unable to maintain the liveness of the properties listed in "
 "the propertybehavior XML element\n"
 " or you attempted to overwrite a file while requesting that files are not "
 "overwritten.\n"
 " %1"
 msgstr ""
 "伺服器無法維護列表在在屬性行為的 XML 元素中的屬性的生存或是您試圖在不被覆寫"
 "的\n"
 "檔案裡覆寫一個檔案。 %1"
 
 #: ioslaves/http/http.cpp:1695
 #, kde-format
 msgid "The requested lock could not be granted. %1"
 msgstr "發出的鎖定請求無法被許可。%1"
 
 #: ioslaves/http/http.cpp:1701
 #, kde-format
 msgid "The server does not support the request type of the body."
 msgstr "伺服器並不支援請求內容的類型。"
 
 #: ioslaves/http/http.cpp:1706 ioslaves/http/http.cpp:1813
 #, kde-format
 msgctxt "%1: request type"
 msgid "Unable to %1 because the resource is locked."
 msgstr "無法連線到 %1，因為資源被鎖定，所以無法進行。"
 
 #: ioslaves/http/http.cpp:1710
 #, kde-format
 msgid "This action was prevented by another error."
 msgstr "該動作被另外一個錯誤所阻止。"
 
 #: ioslaves/http/http.cpp:1716 ioslaves/http/http.cpp:1819
 #, kde-format
 msgctxt "%1: request type"
 msgid ""
 "Unable to %1 because the destination server refuses to accept the file or "
 "folder."
 msgstr "無法連線到 %1，因為對方伺服器拒絕接收該檔案或資料夾。"
 
 #: ioslaves/http/http.cpp:1723 ioslaves/http/http.cpp:1826
 #, kde-format
 msgid ""
 "The destination resource does not have sufficient space to record the state "
 "of the resource after the execution of this method."
 msgstr "目標資源需的空間並不足以紀錄在執行這個方式之後的資源狀態"
 
 #: ioslaves/http/http.cpp:1777
 #, kde-format
 msgid "The resource cannot be deleted."
 msgstr "資源無法被刪除。"
 
 #: ioslaves/http/http.cpp:1790
 #, kde-format
 msgctxt "request type"
 msgid "upload %1"
 msgstr "上傳 %1"
 
 #: ioslaves/http/http.cpp:1840
 #, kde-format
 msgctxt "%1: response code, %2: request type"
 msgid "An unexpected error (%1) occurred while attempting to %2."
 msgstr "在連線到 %2 發生了無預期的錯誤 (%1)。"
 
 #: ioslaves/http/http.cpp:2657
 #, kde-format
 msgid "%1 contacted. Waiting for reply..."
 msgstr "%1 已聯繫上。等待回應中..."
 
 #: ioslaves/http/http.cpp:3001
 #, kde-format
 msgctxt "@info Security check on url being accessed"
 msgid ""
 "<p>You are about to log in to the site \"%1\" with the username \"%2\", but "
 "the website does not require authentication. This may be an attempt to trick "
 "you.</p><p>Is \"%1\" the site you want to visit?</p>"
 msgstr ""
 "<p>您準備使用帳號 %2 登入站台 %1，但是該站台不需要認證。這可能是騙人的網站。"
 "</p><p>您確定您要造訪的站台是 %1 嗎？</p>"
 
 #: ioslaves/http/http.cpp:3007
 #, kde-format
 msgctxt "@title:window"
 msgid "Confirm Website Access"
 msgstr "確認網站存取"
 
 #: ioslaves/http/http.cpp:3096
 #, kde-format
 msgid "Server processing request, please wait..."
 msgstr "伺服器產生請求中，請稍後..."
 
 #: ioslaves/http/http.cpp:3806 ioslaves/http/http.cpp:3864
 #, kde-format
 msgid "Sending data to %1"
 msgstr "送出資料至 %1"
 
 #: ioslaves/http/http.cpp:4319
 #, kde-format
 msgid "Retrieving %1 from %2..."
 msgstr "從 %2 接收 %1 資料..."
 
 #: ioslaves/http/http.cpp:5375
 #, kde-format
 msgid "Authentication Failed."
 msgstr "認證失敗。"
 
 #: ioslaves/http/http.cpp:5506
 #, kde-format
 msgid "Authorization failed."
 msgstr "授權失敗。"
 
 #: ioslaves/http/http.cpp:5523
 #, kde-format
 msgid "Unknown Authorization method."
 msgstr "未知的授權方法。"
 
 #: ioslaves/http/httpfilter.cpp:196
 #, kde-format
 msgid "Receiving corrupt data."
 msgstr "正在接收毀損的資料。"
 
 #: ioslaves/http/kcookiejar/kcookieserver.cpp:66
 #: ioslaves/http/kcookiejar/kcookieserver.cpp:75
 #, kde-format
 msgid "Cannot Save Cookies"
 msgstr "無法儲存 Cookies"
 
 #: ioslaves/http/kcookiejar/kcookieserver.cpp:66
 #, kde-format
 msgid "Could not remove %1, check permissions"
 msgstr "無法移除 %1，請檢查權限"
 
 #: ioslaves/http/kcookiejar/kcookieserver.cpp:75
 #, kde-format
 msgid "Could not create directory %1"
 msgstr "無法建立目錄 %1。"
 
 #: ioslaves/http/kcookiejar/kcookiewin.cpp:66
 #, kde-format
 msgid "Cookie Alert"
 msgstr "Cookie 警告"
 
 #: ioslaves/http/kcookiejar/kcookiewin.cpp:90
 #, kde-format
 msgctxt "%2 hostname, %3 optional cross domain suffix (translated below)"
 msgid ""
 "<p>You received a cookie from<br/><b>%2%3</b><br/>Do you want to accept or "
 "reject this cookie?</p>"
 msgid_plural ""
 "<p>You received %1 cookies from<br/><b>%2%3</b><br/>Do you want to accept or "
 "reject these cookies?</p>"
-msgstr[0] ""
-"<p>您收到了來自<br/><b>%2%3</b><br/>的 %1 個 cookies。要接受還是拒絕？</p>"
+msgstr[0] "<p>您收到了來自<br/><b>%2%3</b><br/>的 %1 個 cookies。要接受還是拒絕？</p>"
 
 #: ioslaves/http/kcookiejar/kcookiewin.cpp:98
 #, kde-format
 msgctxt "@item:intext cross domain cookie"
 msgid " [Cross Domain]"
 msgstr "[跨網域]"
 
 #. i18n: ectx: property (title), widget (QGroupBox, detailsGroupBox)
 #: ioslaves/http/kcookiejar/kcookiewin.cpp:111
 #: ioslaves/http/kcookiejar/kcookiewin.cpp:378
 #: kcms/kio/kcookiesmanagement.ui:97
 #, kde-format
 msgid "Details"
 msgstr "詳細資料"
 
 #: ioslaves/http/kcookiejar/kcookiewin.cpp:114
 #, kde-format
 msgid "See or modify the cookie information"
 msgstr "顯示或修改 cookie 資訊"
 
 #: ioslaves/http/kcookiejar/kcookiewin.cpp:119
 #, kde-format
 msgid "Accept for this &session"
 msgstr "在此工作階段接受(&S)"
 
 #: ioslaves/http/kcookiejar/kcookiewin.cpp:122
 #, kde-format
 msgid "Accept cookie(s) until the end of the current session"
 msgstr "接受 cookie，直到工作階段結束"
 
 #: ioslaves/http/kcookiejar/kcookiewin.cpp:132
 #, kde-format
 msgid "&Accept"
 msgstr "接受(&A)"
 
 #: ioslaves/http/kcookiejar/kcookiewin.cpp:135
 #, kde-format
 msgid "&Reject"
 msgstr "拒絕(&R)"
 
 #: ioslaves/http/kcookiejar/kcookiewin.cpp:171
 #, kde-format
 msgid "Apply Choice To"
 msgstr "套用選擇到"
 
 #: ioslaves/http/kcookiejar/kcookiewin.cpp:174
 #, kde-format
 msgid "&Only this cookie"
 msgstr "只接受這個 cookie(&O)"
 
 #: ioslaves/http/kcookiejar/kcookiewin.cpp:174
 #, kde-format
 msgid "&Only these cookies"
 msgstr "只接受這些 cookies(&O)"
 
 #: ioslaves/http/kcookiejar/kcookiewin.cpp:178
 #, kde-format
 msgid ""
 "Select this option to only accept or reject this cookie. You will be "
 "prompted again if you receive another cookie."
 msgstr ""
 "選擇這個選項來接受或拒絕這個 cookie。在收到另外一個 cookie 時，您會被再次提"
 "示。 "
 
 #: ioslaves/http/kcookiejar/kcookiewin.cpp:181
 #, kde-format
 msgid "All cookies from this do&main"
 msgstr "所有從這個網域傳來的 cookie(&M)"
 
 #: ioslaves/http/kcookiejar/kcookiewin.cpp:184
 #, kde-format
 msgid ""
 "Select this option to accept or reject all cookies from this site. Choosing "
 "this option will add a new policy for the site this cookie originated from. "
 "This policy will be permanent until you manually change it from the System "
 "Settings."
 msgstr ""
 "選擇這個選項來接受或拒絕所有從這個站來的 cookies。選擇這個選項將會新增原則到"
 "這個 cookie 的來源站台。這個原則將會固定直到您自己手動從控制中心改變它。"
 
 #: ioslaves/http/kcookiejar/kcookiewin.cpp:189
 #, kde-format
 msgid "All &cookies"
 msgstr "所有的 cookie(&C)"
 
 #: ioslaves/http/kcookiejar/kcookiewin.cpp:192
 #, kde-format
 msgid ""
 "Select this option to accept/reject all cookies from anywhere. Choosing this "
 "option will change the global cookie policy for all cookies until you "
 "manually change it from the System Settings."
 msgstr ""
 "選擇這個選項來接受/拒絕所有來源的 cookies。 選擇這個選項會改變全域的 cookie "
 "政策，除非您手動在系統設定中變更。"
 
 #: ioslaves/http/kcookiejar/kcookiewin.cpp:260
 #, kde-format
 msgid "Cookie Details"
 msgstr "Cookie 詳細資料"
 
 #. i18n: ectx: property (text), widget (QLabel, nameLabel)
 #: ioslaves/http/kcookiejar/kcookiewin.cpp:265
 #: kcms/kio/kcookiesmanagement.ui:106
 #, kde-format
 msgid "Name:"
 msgstr "名稱:"
 
 #. i18n: ectx: property (text), widget (QLabel, valueLabel)
 #: ioslaves/http/kcookiejar/kcookiewin.cpp:273
 #: kcms/kio/kcookiesmanagement.ui:129
 #, kde-format
 msgid "Value:"
 msgstr "數值:"
 
 #. i18n: ectx: property (text), widget (QLabel, expiresLabel)
 #: ioslaves/http/kcookiejar/kcookiewin.cpp:280
 #: kcms/kio/kcookiesmanagement.ui:198
 #, kde-format
 msgid "Expires:"
 msgstr "過期:"
 
 #. i18n: ectx: property (text), widget (QLabel, patchLabel)
 #: ioslaves/http/kcookiejar/kcookiewin.cpp:287
 #: kcms/kio/kcookiesmanagement.ui:175
 #, kde-format
 msgid "Path:"
 msgstr "路徑:"
 
 #. i18n: ectx: property (text), widget (QLabel, domainLabel)
 #: ioslaves/http/kcookiejar/kcookiewin.cpp:294
 #: kcms/kio/kcookiesmanagement.ui:152
 #, kde-format
 msgid "Domain:"
 msgstr "網域:"
 
 #: ioslaves/http/kcookiejar/kcookiewin.cpp:301
 #, kde-format
 msgid "Exposure:"
 msgstr "曝露:"
 
 #: ioslaves/http/kcookiejar/kcookiewin.cpp:309
 #, kde-format
 msgctxt "Next cookie"
 msgid "&Next >>"
 msgstr "下一個(&N) >>"
 
 #: ioslaves/http/kcookiejar/kcookiewin.cpp:314
 #, kde-format
 msgid "Show details of the next cookie"
 msgstr "顯示下一個 cookie 的詳細資料"
 
 #: ioslaves/http/kcookiejar/kcookiewin.cpp:342
 #, kde-format
 msgid "Not specified"
 msgstr "沒有指定"
 
 #: ioslaves/http/kcookiejar/kcookiewin.cpp:352
 #, kde-format
 msgid "End of Session"
 msgstr "工作階段結束"
 
 #: ioslaves/http/kcookiejar/kcookiewin.cpp:357
 #, kde-format
 msgid "Secure servers only"
 msgstr "只使用安全性伺服器"
 
 #: ioslaves/http/kcookiejar/kcookiewin.cpp:359
 #, kde-format
 msgid "Secure servers, page scripts"
 msgstr "安全性伺服器，頁面命令稿"
 
 #: ioslaves/http/kcookiejar/kcookiewin.cpp:363
 #, kde-format
 msgid "Servers"
 msgstr "伺服器"
 
 #: ioslaves/http/kcookiejar/kcookiewin.cpp:365
 #, kde-format
 msgid "Servers, page scripts"
 msgstr "伺服器，頁面命令稿"
 
 #: ioslaves/remote/remoteimpl.cpp:157
 #, kde-format
 msgid "Add Network Folder"
 msgstr "新增網路資料夾"
 
 #: ioslaves/telnet/ktelnetservice.cpp:65
 #, kde-format
 msgid "Access denied"
 msgstr "存取被拒"
 
 #: ioslaves/telnet/ktelnetservice.cpp:66
 #, kde-format
 msgid "You do not have permission to access the %1 protocol."
 msgstr "您可能沒有權限存取 %1 通訊協定。"
 
 #: ioslaves/trash/kcmtrash.cpp:159
 #, kde-format
 msgid " days"
 msgstr " 天"
 
 #: ioslaves/trash/kcmtrash.cpp:223
 #, kde-format
 msgid ""
 "<para>KDE's wastebin is configured to use the <b>Finder</b>'s Trash.<br></"
 "para>"
 msgstr "<para>KDE 的垃圾桶被設定為使用 <b>Finder</b> 的垃圾桶。<br/></para>"
 
 #: ioslaves/trash/kcmtrash.cpp:225
 #, kde-format
 msgctxt "@info:whatsthis"
 msgid ""
 "<para>Emptying KDE's wastebin will remove only KDE's trash items, "
 "while<br>emptying the Trash through the Finder will delete everything.</"
 "para><para>KDE's trash items will show up in a folder called KDE.trash, in "
 "the Trash can.</para>"
 msgstr ""
 "<para>清空 KDE 的垃圾桶將只會移除 KDE 的垃圾桶項目， 而<br/>透過 Finder 清空"
 "垃圾桶將會刪除所有東西。</para><para>KDE 的垃圾桶項目將會顯示在一個稱為 KDE."
 "trash 的資料夾中，其 在垃圾桶中。</para>"
 
 #: ioslaves/trash/kcmtrash.cpp:262
 #, kde-format
 msgid "Delete files older than"
 msgstr "刪除超過多久的檔案"
 
 #: ioslaves/trash/kcmtrash.cpp:264
 #, kde-kuit-format
 msgctxt "@info:whatsthis"
 msgid ""
 "<para>Check this box to allow <emphasis strong='true'>automatic deletion</"
 "emphasis> of files that are older than the value specified. Leave this "
 "disabled to <emphasis strong='true'>not</emphasis> automatically delete any "
 "items after a certain timespan</para>"
 msgstr ""
 "<para>勾選此選項，可以<emphasis strong='true'>自動刪除</emphasis>超過多久以上"
 "的檔案。若不勾選則<emphasis strong='true'>不會自動</emphasis>刪除。</para>"
 
 #: ioslaves/trash/kcmtrash.cpp:271
 #, kde-format
 msgid " day"
 msgid_plural " days"
 msgstr[0] " 天"
 
 #: ioslaves/trash/kcmtrash.cpp:273
 #, kde-kuit-format
 msgctxt "@info:whatsthis"
 msgid ""
 "<para>Set the number of days that files can remain in the trash. Any files "
 "older than this will be automatically deleted.</para>"
 msgstr "<para>設定垃圾桶中的檔案可以保留多久。超過此期限則自動刪除。</para>"
 
 #: ioslaves/trash/kcmtrash.cpp:277
 #, kde-format
 msgid "Cleanup:"
 msgstr "清理："
 
 #: ioslaves/trash/kcmtrash.cpp:281
 #, kde-format
 msgid "Limit to"
 msgstr "限制至"
 
 #: ioslaves/trash/kcmtrash.cpp:283
 #, kde-kuit-format
 msgctxt "@info:whatsthis"
 msgid ""
 "<para>Check this box to limit the trash to the maximum amount of disk space "
 "that you specify below. Otherwise, it will be unlimited.</para>"
 msgstr ""
 "<para>勾選此選項的話，則可以限制垃圾桶佔磁碟空間最大的大小。不勾選的話則不限"
 "制。</para>"
 
 #: ioslaves/trash/kcmtrash.cpp:286 widgets/kpropertiesdialog.cpp:1078
 #, kde-format
 msgid "Size:"
 msgstr "大小："
 
 #: ioslaves/trash/kcmtrash.cpp:295
 #, kde-kuit-format
 msgctxt "@info:whatsthis"
 msgid ""
 "<para>This is the maximum percent of disk space that will be used for the "
 "trash.</para>"
 msgstr "<para>這是垃圾桶佔磁碟空間大的百分比。</para>"
 
 #: ioslaves/trash/kcmtrash.cpp:300
 #, kde-kuit-format
 msgctxt "@info:whatsthis"
 msgid ""
 "<para>This is the calculated amount of disk space that will be allowed for "
 "the trash, the maximum.</para>"
 msgstr "<para>這是計算後垃圾桶最大會佔掉多少磁碟空間大小。</para>"
 
 #: ioslaves/trash/kcmtrash.cpp:305
 #, kde-format
 msgid "Show a Warning"
 msgstr "顯示警告"
 
 #: ioslaves/trash/kcmtrash.cpp:306
 #, kde-format
 msgid "Delete Oldest Files From Trash"
 msgstr "刪除垃圾桶裡最舊的檔案"
 
 #: ioslaves/trash/kcmtrash.cpp:307
 #, kde-format
 msgid "Delete Biggest Files From Trash"
 msgstr "刪除垃圾桶裡最大的檔案"
 
 #: ioslaves/trash/kcmtrash.cpp:309
 #, kde-kuit-format
 msgctxt "@info:whatsthis"
 msgid ""
 "<para>When the size limit is reached, it will prefer to delete the type of "
 "files that you specify, first. If this is set to warn you, it will do so "
 "instead of automatically deleting files.</para>"
 msgstr ""
 "<para>當達到大小限制時，它會先刪掉您指定的型態的檔案。若設定成警告，則不會自"
 "動刪掉那些檔案。</para>"
 
 #: ioslaves/trash/kcmtrash.cpp:311
 #, kde-format
 msgid "Full Trash:"
 msgstr "滿的垃圾桶："
 
 #: ioslaves/trash/kio_trash.cpp:108 ioslaves/trash/kio_trash.cpp:151
 #: ioslaves/trash/kio_trash.cpp:201 ioslaves/trash/kio_trash.cpp:357
 #: ioslaves/trash/kio_trash.cpp:390 ioslaves/trash/kio_trash.cpp:556
 #: ioslaves/trash/kio_trash.cpp:568
 #, kde-format
 msgid "Malformed URL %1"
 msgstr "不正確的 URL %1"
 
 #: ioslaves/trash/kio_trash.cpp:128
 #, kde-format
 msgid ""
 "The directory %1 does not exist anymore, so it is not possible to restore "
 "this item to its original location. You can either recreate that directory "
 "and use the restore operation again, or drag the item anywhere else to "
 "restore it."
 msgstr ""
 "目錄 %1 不存在，所以無法回復這個檔案。您可以重新建立該目錄，或是把這個檔案拖"
 "曳到別處去存放。"
 
 #: ioslaves/trash/kio_trash.cpp:186 ioslaves/trash/kio_trash_win.cpp:239
 #, kde-format
 msgid "This file is already in the trash bin."
 msgstr "檔案已經在垃圾桶內了。"
 
 #: ioslaves/trash/kio_trash.cpp:274 ioslaves/trash/kio_trash_win.cpp:264
 #, kde-format
 msgid "Internal error in copyOrMove, should never happen"
 msgstr "copyOrMove 發生內部錯誤，不應發生此錯誤"
 
 #: ioslaves/trash/kio_trash_win.cpp:252
 #, kde-format
 msgid "not supported"
 msgstr "不支援"
 
 #: ioslaves/trash/ktrash.cpp:39
 #, kde-format
 msgid ""
 "Helper program to handle the KDE trash can\n"
 "Note: to move files to the trash, do not use ktrash, but \"kioclient move "
 "'url' trash:/\""
 msgstr ""
 "協助使用 KDE 垃圾桶的程式\n"
 "注意：要移動檔案到垃圾桶，不要用 ktrash，而要使用 \"kioclient move 'url' "
 "trash:/\""
 
 #: ioslaves/trash/ktrash.cpp:42
 #, kde-format
 msgid "Empty the contents of the trash"
 msgstr "清空垃圾桶"
 
 #: ioslaves/trash/ktrash.cpp:43
 #, kde-format
 msgid "Restore a trashed file to its original location"
 msgstr "將垃圾桶內的檔案回復到原來的位置"
 
 #: ioslaves/trash/trashimpl.cpp:1379
 #, kde-format
 msgid "The file is too large to be trashed."
 msgstr "檔案太大無法擺在垃圾桶內。"
 
 #: ioslaves/trash/trashimpl.cpp:1385
 #, kde-format
 msgid ""
 "The trash has reached its maximum size!\n"
 "Cleanup the trash manually."
 msgstr ""
 "垃圾桶已滿！\n"
 "請手動清理一下。"
 
 #: kcms/kio/cache.cpp:113
 #, kde-format
 msgid ""
 "<h1>Cache</h1><p>This module lets you configure your cache settings.</"
 "p><p>This specific cache is an area on the disk where recently read web "
 "pages are stored. If you want to retrieve a web page again that you have "
 "recently read, it will not be downloaded from the Internet, but rather "
 "retrieved from the cache, which is a lot faster.</p>"
 msgstr ""
 "<h1>快取</h1><p>這個模組讓您設定您的快取設定。</p><p>此快取區域是在 磁碟上存"
 "放剛讀取過的網頁的內部記憶體。如果您要再次接收剛剛讀過的網頁，就不會從網際網"
 "路下載，而是從快取中接收，這將會快得多。</p>"
 
 #. i18n: ectx: property (whatsThis), widget (QCheckBox, cbUseCache)
 #: kcms/kio/cache.ui:17
 #, kde-format
 msgid ""
 "Check this box if you want the web pages you visit to be stored on your hard "
 "disk for quicker access. The stored pages will only be updated as needed "
 "instead of on every visit to that site. This is especially useful if you "
 "have a slow connection to the Internet."
 msgstr ""
 "如果您希望瀏覽過的資料能夠儲存在硬碟上，以便於能快速存取，您可以核取這個方"
 "塊。儲存的網頁只有在必要時才會下載而非在你每次參訪該網站時。如果您的網路連線"
 "速度很慢，此功能將會特別有用。"
 
 #. i18n: ectx: property (text), widget (QCheckBox, cbUseCache)
 #: kcms/kio/cache.ui:20
 #, kde-format
 msgid "&Use cache"
 msgstr "使用快取(&U)"
 
 #. i18n: ectx: property (text), widget (QTreeWidget, policyTreeWidget)
 #. i18n: ectx: property (title), widget (QGroupBox, bgCachePolicy)
 #: kcms/kio/cache.ui:46 kcms/kio/kcookiespolicies.ui:168
 #, kde-format
 msgid "Policy"
 msgstr "政策"
 
 #. i18n: ectx: property (whatsThis), widget (QRadioButton, rbVerifyCache)
 #: kcms/kio/cache.ui:52
 #, kde-format
 msgid ""
 "Verify whether the cached web page is valid before attempting to fetch the "
 "web page again."
 msgstr "直到要把一個網頁抓回來時，才確認快取的網頁是否還有效。"
 
 #. i18n: ectx: property (text), widget (QRadioButton, rbVerifyCache)
 #: kcms/kio/cache.ui:55
 #, kde-format
 msgid "&Keep cache in sync"
 msgstr "保持快取同步(&K)"
 
 #. i18n: ectx: property (whatsThis), widget (QRadioButton, rbCacheIfPossible)
 #: kcms/kio/cache.ui:62
 #, kde-format
 msgid ""
 "Always use documents from the cache when available. You can still use the "
 "reload button to synchronize the cache with the remote host."
 msgstr ""
 "在可能的情形下永遠使用快取中的文件。您仍然可以使用重新整理按鈕來讓快取與遠端"
 "主機保持同步。"
 
 #. i18n: ectx: property (text), widget (QRadioButton, rbCacheIfPossible)
 #: kcms/kio/cache.ui:65
 #, kde-format
 msgid "Use cache whenever &possible"
 msgstr "儘可能使用快取(&P)"
 
 #. i18n: ectx: property (whatsThis), widget (QRadioButton, rbOfflineMode)
 #: kcms/kio/cache.ui:72
 #, kde-format
 msgid ""
 "Do not fetch web pages that are not already stored in the cache. Offline "
 "mode prevents you from viewing pages that you have not previously visited."
-msgstr ""
-"既使網頁不在快取資料中，也不抓取。離線模式會使你只能瀏覽之前看過的網頁。"
+msgstr "既使網頁不在快取資料中，也不抓取。離線模式會使你只能瀏覽之前看過的網頁。"
 
 #. i18n: ectx: property (text), widget (QRadioButton, rbOfflineMode)
 #: kcms/kio/cache.ui:75
 #, kde-format
 msgid "O&ffline browsing mode"
 msgstr "離線瀏覽模式(&F)"
 
 #. i18n: ectx: property (text), widget (QLabel, lbMaxCacheSize)
 #: kcms/kio/cache.ui:88
 #, kde-format
 msgid "Disk cache &size:"
 msgstr "磁碟快取大小(&S):"
 
 #. i18n: ectx: property (suffix), widget (QSpinBox, sbMaxCacheSize)
 #: kcms/kio/cache.ui:104
 #, kde-format
 msgid " KiB"
 msgstr " KB"
 
 #. i18n: ectx: property (text), widget (QPushButton, clearCacheButton)
 #: kcms/kio/cache.ui:114
 #, kde-format
 msgid "C&lear Cache"
 msgstr "清除快取(&L)"
 
 #: kcms/kio/kcookiesmain.cpp:39
 #, kde-format
 msgid "&Policy"
 msgstr "政策(&P)"
 
 #: kcms/kio/kcookiesmain.cpp:45
 #, kde-format
 msgid "&Management"
 msgstr "管理(&M)"
 
 #: kcms/kio/kcookiesmain.cpp:82
 #, kde-format
 msgid ""
 "<h1>Cookies</h1><p>Cookies contain information that KDE applications using "
 "the HTTP protocol (like Konqueror) store on your computer, initiated by a "
 "remote Internet server. This means that a web server can store information "
 "about you and your browsing activities on your machine for later use. You "
 "might consider this an invasion of privacy.</p><p> However, cookies are "
 "useful in certain situations. For example, they are often used by Internet "
 "shops, so you can 'put things into a shopping basket'. Some sites require "
 "you have a browser that supports cookies.</p><p> Because most people want a "
 "compromise between privacy and the benefits cookies offer, the HTTP kioslave "
 "offers you the ability to customize the way it handles cookies. So you might "
 "want to set the default policy to ask you whenever a server wants to set a "
 "cookie, allowing you to decide. For your favorite shopping web sites that "
 "you trust, you might want to set the policy to accept, then you can access "
 "the web sites without being prompted every time a cookie is received.</p>"
 msgstr ""
 "<h1>Cookies</h1><p>Cookies 包含了遠端伺服器要求使用 HTTP 協定的 KDE 應用程式"
 "（像是 Konqueror）儲存在您電腦的資訊。這讓網頁伺服器可以在您的電腦儲存關於您"
 "的資訊與瀏覽動作以備後續使用。您可能會認為這侵犯您的隱私權。</p> <p>然而，在"
 "某些狀況下 Cookies 是非常有用的。例如在網路購物時，您可以「把貨品放入您的購物"
 "車中」。有些站台要求您必須要有一個支援 Cookies 的瀏覽器。</p> <p>由於大多數的"
 "人希望在方便與隱私之間取得一個平衡點， KDE 提供您一個自訂的處理 Cookies 方"
 "式。您可能希望 KDE 在伺服器要求設定 Cookie 時，預設要先徵求您的同意，讓您有決"
 "定的機會，對於您偏好而且可信任的購物網站，您可以設定政策為接受 Cookie，如此您"
 "在使用該網站時不需要一直被詢問。</p>"
 
 #: kcms/kio/kcookiesmanagement.cpp:140 kcms/kio/kcookiesmanagement.cpp:156
 #, kde-format
 msgid "D-Bus Communication Error"
 msgstr "D-Bus 通訊錯誤"
 
 #: kcms/kio/kcookiesmanagement.cpp:141
 #, kde-format
 msgid "Unable to delete all the cookies as requested."
 msgstr "無法刪除所有的 cookie"
 
 #: kcms/kio/kcookiesmanagement.cpp:157
 #, kde-format
 msgid "Unable to delete cookies as requested."
 msgstr "無法刪除 cookie"
 
 #: kcms/kio/kcookiesmanagement.cpp:228
 #, kde-format
 msgid "<h1>Cookie Management Quick Help</h1>"
 msgstr "<h1>Cookie 管理快速說明</h1>"
 
 #: kcms/kio/kcookiesmanagement.cpp:238
 #, kde-format
 msgid "Information Lookup Failure"
 msgstr "資訊查詢錯誤"
 
 #: kcms/kio/kcookiesmanagement.cpp:239
 #, kde-format
 msgid ""
 "Unable to retrieve information about the cookies stored on your computer."
 msgstr "無法取得儲存在你電腦上的 cookie 的資訊"
 
 #: kcms/kio/kcookiesmanagement.cpp:327
 #, kde-format
 msgid "End of session"
 msgstr "結束工作階段"
 
 #: kcms/kio/kcookiesmanagement.cpp:336
 #, kde-format
 msgid "Yes"
 msgstr "是"
 
 #. i18n: ectx: property (placeholderText), widget (KTreeWidgetSearchLine, searchLineEdit)
 #: kcms/kio/kcookiesmanagement.ui:20
 #, kde-format
 msgid "Search"
 msgstr "搜尋"
 
 #. i18n: ectx: property (toolTip), widget (QTreeWidget, cookiesTreeWidget)
 #: kcms/kio/kcookiesmanagement.ui:27
 #, kde-format
 msgid "Search interactively for domains and hosts"
 msgstr "互動式搜尋網域和主機"
 
 #. i18n: ectx: property (text), widget (QTreeWidget, cookiesTreeWidget)
 #: kcms/kio/kcookiesmanagement.ui:43
 #, kde-format
 msgid "Site"
 msgstr "站台"
 
 #. i18n: ectx: property (text), widget (QTreeWidget, cookiesTreeWidget)
 #: kcms/kio/kcookiesmanagement.ui:48
 #, kde-format
 msgid "Cookie Name"
 msgstr "Cookie 名稱"
 
 #. i18n: ectx: property (text), widget (QPushButton, deleteButton)
 #. i18n: ectx: property (text), widget (QPushButton, pbDelete)
 #: kcms/kio/kcookiesmanagement.ui:56 kcms/kio/kcookiespolicies.ui:190
 #: kcms/kio/useragentdlg.ui:202
 #, kde-format
 msgid "D&elete"
 msgstr "刪除(&E)"
 
 #. i18n: ectx: property (text), widget (QPushButton, deleteAllButton)
 #. i18n: ectx: property (text), widget (QPushButton, pbDeleteAll)
 #: kcms/kio/kcookiesmanagement.ui:63 kcms/kio/kcookiespolicies.ui:197
 #: kcms/kio/useragentdlg.ui:212
 #, kde-format
 msgid "Delete A&ll"
 msgstr "刪除全部(&L)"
 
 #. i18n: ectx: property (text), widget (QPushButton, configPolicyButton)
 #: kcms/kio/kcookiesmanagement.ui:70
 #, kde-format
 msgid "Configure &Policy..."
 msgstr "設定政策(&P)..."
 
 #. i18n: ectx: property (text), widget (QPushButton, reloadButton)
 #: kcms/kio/kcookiesmanagement.ui:77
 #, kde-format
 msgid "&Reload List"
 msgstr "重新讀取列表(&R)"
 
 #. i18n: ectx: property (text), widget (QLabel, secureLabel)
 #: kcms/kio/kcookiesmanagement.ui:221
 #, kde-format
 msgid "Secure:"
 msgstr "安全性:"
 
 #: kcms/kio/kcookiespolicies.cpp:179
 #, kde-format
 msgctxt "@title:window"
 msgid "Change Cookie Policy"
 msgstr "變更 Cookie 政策"
 
 #: kcms/kio/kcookiespolicies.cpp:198
 #, kde-format
 msgctxt "@title:window"
 msgid "New Cookie Policy"
 msgstr "新增 Cookie 政策"
 
 #: kcms/kio/kcookiespolicies.cpp:230
 #, kde-format
 msgid ""
 "<qt>A policy already exists for<center><b>%1</b></center>Do you want to "
 "replace it?</qt>"
-msgstr ""
-"<qt>關於<center><b>%1</b></center>的政策已經存在，您確定要覆蓋它嗎？</qt>"
+msgstr "<qt>關於<center><b>%1</b></center>的政策已經存在，您確定要覆蓋它嗎？</qt>"
 
 #: kcms/kio/kcookiespolicies.cpp:233
 #, kde-format
 msgctxt "@title:window"
 msgid "Duplicate Policy"
 msgstr "重複的政策"
 
 #: kcms/kio/kcookiespolicies.cpp:234 kcms/kio/useragentdlg.cpp:201
 #, kde-format
 msgid "Replace"
 msgstr "取代"
 
 #: kcms/kio/kcookiespolicies.cpp:399
 #, kde-format
 msgid ""
 "Unable to communicate with the cookie handler service.\n"
 "Any changes you made will not take effect until the service is restarted."
 msgstr ""
 "無法和 cookie handler 服務溝通。\n"
 "這個服務重新啟動，你所做的變更才能被執行。"
 
 #: kcms/kio/kcookiespolicies.cpp:441
 #, kde-format
 msgid ""
 "<h1>Cookies</h1><p>Cookies contain information that KDE application using "
 "the HTTP protocol (like Konqueror) stores on your computer from a remote "
 "Internet server. This means that a web server can store information about "
 "you and your browsing activities on your machine for later use. You might "
 "consider this an invasion of privacy.</p><p>However, cookies are useful in "
 "certain situations. For example, they are often used by Internet shops, so "
 "you can 'put things into a shopping basket'. Some sites require you have a "
 "browser that supports cookies.</p><p>Because most people want a compromise "
 "between privacy and the benefits cookies offer, KDE offers you the ability "
 "to customize the way it handles cookies. You might, for example want to set "
 "KDE's default policy to ask you whenever a server wants to set a cookie or "
 "simply reject or accept everything. For example, you might choose to accept "
 "all cookies from your favorite shopping web site. For this all you have to "
 "do is either browse to that particular site and when you are presented with "
 "the cookie dialog box, click on <i> This domain </i> under the 'apply to' "
 "tab and choose accept or simply specify the name of the site in the <i> "
 "Domain Specific Policy </i> tab and set it to accept. This enables you to "
 "receive cookies from trusted web sites without being asked every time KDE "
 "receives a cookie.</p>"
 msgstr ""
 "<h1>Cookies</h1><p>Cookies 包含了遠端伺服器要求使用 HTTP 協定的 KDE 應用程式"
 "（像是 Konqueror）儲存在您電腦的資訊。這讓網頁伺服器可以在您的電腦儲存關於您"
 "的資訊與瀏覽動作以備後續使用。您可能會認為這侵犯您的隱私權。</p> <p>然而，在"
 "某些狀況下 Cookies 是非常有用的。例如在網路購物時，您可以「把貨品放入您的購物"
 "車中」。有些站台要求您必須要有一個支援 Cookies 的瀏覽器。</p> <p>由於大多數的"
 "人希望在方便與隱私之間取得一個平衡點，KDE 提供您一個自訂的處理 Cookies 方式。"
 "例如您可能想要設定 KDE 的預設政策為每次有伺服器要設定cookie 或單純地拒絕或接"
 "受任何事都要詢問您。您也可能選擇接受所有來自您喜愛的購物網站的 cookies 。要做"
 "這些事您可以瀏覽該特定網站，在出現 cookie 對話方塊時單擊「套用到」標籤下的<i>"
 "此網域</i>並選擇接受，或者也可以在<i>特定網域政策</i>標籤中指定網站的名稱並設"
 "定為接受。這樣使您可以接收來自信任網站的 cookies 而不會在每次 KDE 收到 "
 "cookie 的時候都來問您。</p>"
 
 #. i18n: ectx: property (whatsThis), widget (QCheckBox, cbEnableCookies)
 #: kcms/kio/kcookiespolicies.ui:20
 #, kde-format
 msgid ""
 "<qt>\n"
 "<p>Enable cookie support. Normally you will want to have cookie support "
 "enabled and customize it to suit your privacy needs.</p><p>\n"
 "Please note that disabling cookie support might make many web sites "
 "unbrowsable.</p>\n"
 "</qt>"
 msgstr ""
 "<qt>\n"
 "<p>這個選項將啟動 cookie 支援。一般您會希望啟用 cookie 支援並調整 它以符合您"
 "的隱私需求。</p>\n"
 "<p>請注意停用 cookie 支援可能造成許多網站無法瀏覽。</p>\n"
 "</qt>"
 
 #. i18n: ectx: property (text), widget (QCheckBox, cbEnableCookies)
 #: kcms/kio/kcookiespolicies.ui:23
 #, kde-format
 msgid "Enable coo&kies"
 msgstr "啟用 Cookies(&K)"
 
 #. i18n: ectx: property (whatsThis), widget (QCheckBox, cbRejectCrossDomainCookies)
 #: kcms/kio/kcookiespolicies.ui:35
 #, kde-format
 msgid ""
 "<qt>\n"
 "Reject the so called third-party cookies. These are cookies that originate "
 "from a site other than the one you are currently browsing. For example, if "
 "you visit <b>www.foobar.com</b> while this option is on, only cookies that "
 "originate from www.foobar.com will be processed per your settings. Cookies "
 "from any other site will be rejected. This reduces the chances of site "
 "operators compiling a profile about your daily browsing habits.\n"
 "</qt>"
 msgstr ""
 "<qt>\n"
 "拒絕所謂的第三方 cookies。這些 cookies 是由您正在瀏覽的網站以外的網站所產生"
 "的。比方說當您參觀 <b>www.foobar.com</b> 時選取了這個選項，只有來自 www."
 "foobar.com 的 cookies 才會被處理。所有其他的 cookies 會被自動拒絕。這減少了網"
 "站管理者收集您每日瀏覽習慣的機會。\n"
 "</qt>"
 
 #. i18n: ectx: property (text), widget (QCheckBox, cbRejectCrossDomainCookies)
 #: kcms/kio/kcookiespolicies.ui:38
 #, kde-format
 msgid "Only acce&pt cookies from originating server"
 msgstr "只接受來自原伺服器的 cookies(&P)"
 
 #. i18n: ectx: property (whatsThis), widget (QCheckBox, cbAutoAcceptSessionCookies)
 #: kcms/kio/kcookiespolicies.ui:46
 #, kde-format
 msgid ""
 "<p>\n"
 "Automatically accept temporary cookies meant to expire at the end of the "
 "current session. Such cookies will not be stored in your computer's hard "
 "drive or storage device. Instead, they are deleted when you close all "
 "applications (e.g. your browser) that use them.</p><p><u>NOTE</u> Checking "
 "this option overrides your default as well as site specific cookie policies "
 "for session cookies.</p>"
 msgstr ""
 "<p>\n"
 "自動接收暫存 cookies 代表它們會在目前的工作階段結束時過期。這類 cookies 不會"
 "儲存在您電腦的硬碟或儲存裝置裡。因為當您關閉所有使用它們的應用程式（例如您的"
 "瀏覽器）時，它們就被刪除了。</p><p><u>注意：</u>勾選此選項連帶地會覆蓋您的特"
 "定網站 cookie 政策。然而，這麼做會增進您的隱私，因為所有的 cookies 會在目前工"
 "作階段結束時移除。</p>"
 
 #. i18n: ectx: property (text), widget (QCheckBox, cbAutoAcceptSessionCookies)
 #: kcms/kio/kcookiespolicies.ui:49
 #, kde-format
 msgid "Automaticall&y accept session cookies"
 msgstr "自動接受工作階段 cookies(&Y)"
 
 #. i18n: ectx: property (whatsThis), widget (QGroupBox, bgDefault)
 #: kcms/kio/kcookiespolicies.ui:68
 #, kde-format
 msgid ""
 "<qt>\n"
 "Determines how cookies received from a remote machine will be handled: \n"
 "<ul>\n"
 "<li><b>Ask</b> will cause KDE to ask for your confirmation whenever a server "
 "wants to set a cookie.</li>\n"
 "<li><b>Accept</b> will cause cookies to be accepted without prompting you.</"
 "li>\n"
 "<li><b>Accept until end of session</b> will cause cookies to be accepted but "
 "they will expire at the end of the session.</li>\n"
 "<li><b>Reject</b> will cause the cookiejar to refuse all cookies it receives."
 "</li>\n"
 "</ul><p>\n"
 "<u>NOTE:</u> Domain specific policies, which can be set below, always take "
 "precedence over the default policy.</p>\n"
 "</qt>"
 msgstr ""
 "<qt>\n"
 "決定收到來自遠端機器的 cookies 將如何處理：\n"
 "<ul>\n"
 "<li><b>詢問</b>會讓 KDE 在每次有伺服器要設定 cookie 時要求您的許可</li>\n"
 "<li><b>接受</b>會不提示您而接受 cookies</li>\n"
 "<li><b>暫時接受</b>會接受 cookies，但是在工作階段結束後就刪除。</li>\n"
 "<li><b>拒絕</b>會拒絕所有收到的 cookies</li>\n"
 "</ul><p>\n"
 "<u>注意：</u>特定網域政策可以在下面設定，它的優先權會高於預設的政策。</p>\n"
 "</qt>"
 
 #. i18n: ectx: property (title), widget (QGroupBox, bgDefault)
 #: kcms/kio/kcookiespolicies.ui:71
 #, kde-format
 msgid "Default Policy"
 msgstr "預設政策"
 
 #. i18n: ectx: property (text), widget (QRadioButton, rbPolicyAccept)
 #: kcms/kio/kcookiespolicies.ui:77
 #, kde-format
 msgid "Accep&t all cookies"
 msgstr "接受所有 cookies(&T)"
 
 #. i18n: ectx: property (text), widget (QRadioButton, rbPolicyAcceptForSession)
 #: kcms/kio/kcookiespolicies.ui:84
 #, kde-format
 msgid "Accept &until end of session"
 msgstr "暫時接受到工作階段結束為止(&U)"
 
 #. i18n: ectx: property (text), widget (QRadioButton, rbPolicyAsk)
 #: kcms/kio/kcookiespolicies.ui:91
 #, kde-format
 msgid "Ask &for confirmation"
 msgstr "詢問以獲得確認(&F)"
 
 #. i18n: ectx: property (text), widget (QRadioButton, rbPolicyReject)
 #: kcms/kio/kcookiespolicies.ui:98
 #, kde-format
 msgid "Re&ject all cookies"
 msgstr "拒絕所有 cookies(&J)"
 
 #. i18n: ectx: property (whatsThis), widget (QGroupBox, gbDomainSpecific)
 #: kcms/kio/kcookiespolicies.ui:123
 #, kde-format
 msgid ""
 "<qt>\n"
 "To add a new policy, simply click on the <b>Add...</b> button and supply the "
 "necessary information. To change an existing policy, use the <b>Change...</"
 "b> button and choose the new policy from the policy dialog box. Clicking on "
 "the <b>Delete</b> button will remove the currently selected policy causing "
 "the default policy setting to be used for that domain, whereas <b>Delete "
 "All</b> will remove all the site specific policies.\n"
 "</qt>"
 msgstr ""
 "<qt>\n"
 "要增加新的政策。只要單擊 <b>新增...</b>按鈕，並提供對話窗中必須的資訊。要變更"
 "一個現存的政策，單擊 <b>變更...</b>按鈕，並在對話窗中選擇新的政策。單擊 <b>刪"
 "除</b> 將會移除您所選擇的項目，並以預設的政策取代該網域的政策。<b>刪除全部</"
 "b> 會移除所有的特定網站政策。\n"
 "</qt>"
 
 #. i18n: ectx: property (title), widget (QGroupBox, gbDomainSpecific)
 #: kcms/kio/kcookiespolicies.ui:126
 #, kde-format
 msgid "Site Policy"
 msgstr "網站政策"
 
 #. i18n: ectx: property (toolTip), widget (KTreeWidgetSearchLine, kListViewSearchLine)
 #: kcms/kio/kcookiespolicies.ui:135
 #, kde-format
 msgid "Search interactively for domains"
 msgstr "互動式搜尋網域"
 
 #. i18n: ectx: property (placeholderText), widget (KTreeWidgetSearchLine, kListViewSearchLine)
 #: kcms/kio/kcookiespolicies.ui:138
 #, kde-format
 msgid "Search..."
 msgstr "搜尋…"
 
 #. i18n: ectx: property (whatsThis), widget (QTreeWidget, policyTreeWidget)
 #: kcms/kio/kcookiespolicies.ui:147
 #, kde-format
 msgid ""
 "<qt>\n"
 "List of sites for which you have set a specific cookie policy. Specific "
 "policies override the default policy setting for these sites.\n"
 "</qt>"
 msgstr ""
 "<qt>\n"
 "你所設定使用不同的 cookie 處理方式的網站列表。 對這些網站，系統會使用自訂的 "
 "cookie 處理方式，原不是預設的處理方式。\n"
 "</qt>"
 
 #. i18n: ectx: property (text), widget (QTreeWidget, policyTreeWidget)
 #: kcms/kio/kcookiespolicies.ui:163
 #, kde-format
 msgid "Domain"
 msgstr "網域"
 
 #. i18n: ectx: property (text), widget (QPushButton, pbNew)
 #. i18n: ectx: property (text), widget (QPushButton, newButton)
 #: kcms/kio/kcookiespolicies.ui:176 kcms/kio/useragentdlg.ui:182
 #: urifilters/ikws/ikwsopts_ui.ui:74
 #, kde-format
 msgid "&New..."
 msgstr "新增(&N)..."
 
 #. i18n: ectx: property (text), widget (QPushButton, pbChange)
 #. i18n: ectx: property (text), widget (QPushButton, changeButton)
 #: kcms/kio/kcookiespolicies.ui:183 kcms/kio/useragentdlg.ui:192
 #: urifilters/ikws/ikwsopts_ui.ui:87
 #, kde-format
 msgid "Chan&ge..."
 msgstr "變更(&H)..."
 
 #. i18n: ectx: property (text), item, widget (KComboBox, cbPolicy)
 #: kcms/kio/kcookiespolicyselectiondlg.h:36
 #: kcms/kio/kcookiespolicyselectiondlg.ui:81
 #, kde-format
 msgid "Accept"
 msgstr "接受"
 
 #: kcms/kio/kcookiespolicyselectiondlg.h:38
 #, kde-format
 msgid "Accept For Session"
 msgstr "在此工作階段接受"
 
 #. i18n: ectx: property (text), item, widget (KComboBox, cbPolicy)
 #: kcms/kio/kcookiespolicyselectiondlg.h:40
 #: kcms/kio/kcookiespolicyselectiondlg.ui:91
 #, kde-format
 msgid "Reject"
 msgstr "拒絕"
 
 #. i18n: ectx: property (text), item, widget (KComboBox, cbPolicy)
 #: kcms/kio/kcookiespolicyselectiondlg.h:42
 #: kcms/kio/kcookiespolicyselectiondlg.ui:96
 #, kde-format
 msgid "Ask"
 msgstr "詢問"
 
 #: kcms/kio/kcookiespolicyselectiondlg.h:44
 #, kde-format
 msgid "Do Not Know"
 msgstr "不知道"
 
 #. i18n: ectx: property (whatsThis), widget (QLabel, lbDomain)
 #: kcms/kio/kcookiespolicyselectiondlg.ui:22
 #, kde-format
 msgid ""
 "<qt>\n"
 "Enter the host or domain to which this policy applies, e.g. <b>www.kde.org</"
 "b> or <b>.kde.org</b>.\n"
 "</qt>"
 msgstr ""
 "<qt>\n"
 "請輸入此要套用此政策的主機或網域。例如 <i>www.kde.org</i> 或 <i>.kde.org</"
 "i>。\n"
 "</qt>"
 
 #. i18n: ectx: property (text), widget (QLabel, lbDomain)
 #: kcms/kio/kcookiespolicyselectiondlg.ui:25
 #, kde-format
 msgid "Site name:"
 msgstr "站台名稱："
 
 #. i18n: ectx: property (whatsThis), widget (QLineEdit, leDomain)
 #: kcms/kio/kcookiespolicyselectiondlg.ui:38
 #, kde-format
 msgid "Enter the host or domain name, e.g. .kde.org, this policy applies to."
 msgstr "輸入此政策要套用到的主機或網域名稱，例如 kde.org。"
 
 #. i18n: ectx: property (whatsThis), widget (QLabel, lbPolicy)
 #. i18n: ectx: property (whatsThis), widget (KComboBox, cbPolicy)
 #: kcms/kio/kcookiespolicyselectiondlg.ui:53
 #: kcms/kio/kcookiespolicyselectiondlg.ui:77
 #, kde-format
 msgid ""
 "<qt>\n"
 "Select the desired policy:\n"
 "<ul>\n"
 "<li><b>Accept</b> - Allows this site to set cookies</li>\n"
 "<li><b>Accept until end of session</b> - Allows this site to set cookies but "
 "they will expire at the end of the session.</li>\n"
 "<li><b>Reject</b> - Refuse all cookies sent from this site</li>\n"
 "<li><b>Ask</b> - Prompt when cookies are received from this site</li>\n"
 "</ul>\n"
 "</qt>"
 msgstr ""
 "<qt>\n"
 "選擇欲使用的政策：\n"
 "<ul>\n"
 "<li><b>接受</b> - 允許此網址設定 cookie</li>\n"
 "<li><b>暫時接受</b> - 接受 cookie 但是在工作階段結束後即失效。</li>\n"
 "<li><b>拒絕</b> - 拒絕所有網址送來的 cookie</li>\n"
 "<li><b>詢問</b> - 詢問使用者是否接受cookie</li>\n"
 "</ul>\n"
 "</qt>"
 
 #. i18n: ectx: property (text), widget (QLabel, lbPolicy)
 #: kcms/kio/kcookiespolicyselectiondlg.ui:56
 #, kde-format
 msgid "Policy:"
 msgstr "政策："
 
 #. i18n: ectx: property (text), item, widget (KComboBox, cbPolicy)
 #: kcms/kio/kcookiespolicyselectiondlg.ui:86
 #, kde-format
 msgid "Accept until end of session"
 msgstr "暫時接受"
 
 #. i18n: ectx: label, entry (DisablePassiveMode), group (DesktopIcons)
 #: kcms/kio/kio_ftprc.kcfg:10
 #, kde-format
 msgid "Disable Passive FTP"
 msgstr "停用被動 FTP"
 
 #. i18n: ectx: whatsthis, entry (DisablePassiveMode), group (DesktopIcons)
 #: kcms/kio/kio_ftprc.kcfg:11
 #, kde-format
 msgid ""
 "When FTP connections are passive the client connects to the server, instead "
 "of the other way round, so firewalls do not block the connection; old FTP "
 "servers may not support Passive FTP though."
 msgstr ""
 "當 FTP 連線是客戶端以被動連線到伺服器，而非其他方式，防火牆將不會阻擋該連線；"
 "舊式 FTP 伺服器可能不支援被動 FTP 通行。"
 
 #. i18n: ectx: label, entry (MarkPartial), group (Global Options)
 #. i18n: ectx: label, entry (MarkPartial), group (DesktopIcons)
 #: kcms/kio/kio_ftprc.kcfg:16 kcms/kio/kioslave.kcfg:34
 #, kde-format
 msgid "Mark partially uploaded files"
 msgstr "標記部分上傳的檔案"
 
 #. i18n: ectx: whatsthis, entry (MarkPartial), group (Global Options)
 #. i18n: ectx: whatsthis, entry (MarkPartial), group (DesktopIcons)
 #: kcms/kio/kio_ftprc.kcfg:17 kcms/kio/kioslave.kcfg:35
 #, kde-format
 msgid ""
 "While a file is being uploaded its extension is \".part\". When fully "
 "uploaded it is renamed to its real name."
 msgstr ""
 "當檔案開始上傳時為它加上延伸檔名「.part」。當檔案完整的上傳時將它的名稱改變為"
 "真實名稱。"
 
 #: kcms/kio/kproxydlg.cpp:553
 #, kde-format
 msgid ""
 "<h1>Proxy</h1><p>A proxy server is an intermediate program that sits between "
 "your machine and the Internet and provides services such as web page caching "
 "and/or filtering.</p><p>Caching proxy servers give you faster access to "
 "sites you have already visited by locally storing or caching the content of "
 "those pages; filtering proxy servers, on the other hand, provide the ability "
 "to block out requests for ads, spam, or anything else you want to block.</"
 "p><p><u>Note:</u> Some proxy servers provide both services.</p>"
 msgstr ""
 "<h1>代理伺服器</h1><p>代理伺服器是位於您的電腦和網際網路的中介程式，提供網頁"
 "快取和/或過濾的服務。</p><p>快取式代理伺服器會將您曾經參訪過的網站內容儲存起"
 "來，以加速加速網際網路資料讀取速度；過濾式快取伺服器，則提供阻擋廣告、垃圾以"
 "及其他任何你想要阻擋的東西的能力。</p><p><u>注意：</u>有些代理伺服器同時提供"
 "這兩種服務。</p>"
 
 #. i18n: ectx: property (whatsThis), widget (QWidget, ProxyDialogUI)
 #: kcms/kio/kproxydlg.ui:20
 #, kde-format
 msgid ""
 "<qt>\n"
 "Setup proxy configuration.\n"
 "<p>\n"
 "A proxy server is an intermediate machine that sits between your computer "
 "and the Internet and provides services such as web page caching and "
 "filtering. Caching proxy servers give you faster access to web sites you "
 "have already visited by locally storing or caching those pages; filtering "
 "proxy servers usually provide the ability to block out requests for ads, "
 "spam, or anything else you want to block.\n"
 "<p>\n"
 "If you are uncertain whether or not you need to use a proxy server to "
 "connect to the Internet, consult your Internet service provider's setup "
 "guide or your system administrator.\n"
 "</qt>"
 msgstr ""
 "<qt>\n"
 "設定代理伺服器組態。\n"
 "<p>\n"
 "代理伺服器是位於您的電腦和網際網路的中介程式，提供網頁快取和/或過濾的服務。</"
 "p><p>快取式代理伺服器會將您曾經參訪過的網站內容儲存起來，以加速加速網際網路資"
 "料讀取速度；過濾式快取伺服器，則提供阻擋廣告、垃圾以及其他任何你想要阻擋的東"
 "西的能力。\n"
 "<p>\n"
 "若您不知道是否需要設定代理伺服器，請先參考您的網路服務供應商的設定指南，或詢"
 "問系統管理員。\n"
 "</qt>"
 
 #. i18n: ectx: property (whatsThis), widget (QRadioButton, noProxyRadioButton)
 #: kcms/kio/kproxydlg.ui:26
 #, kde-format
 msgid "Connect to the Internet directly."
 msgstr "直接連線到網際網路。"
 
 #. i18n: ectx: property (text), widget (QRadioButton, noProxyRadioButton)
 #: kcms/kio/kproxydlg.ui:29
 #, kde-format
 msgid "No Proxy"
 msgstr "沒有代理伺服器"
 
 #. i18n: ectx: property (whatsThis), widget (QRadioButton, autoDiscoverProxyRadioButton)
 #: kcms/kio/kproxydlg.ui:46
 #, kde-format
 msgid ""
 "<qt>\n"
 "Automatically detect and configure the proxy settings.<p>\n"
 "Automatic detection is performed using the <b>Web Proxy Auto-Discovery "
 "Protocol (WPAD)</b>.<p>\n"
 "<b>NOTE:</b> This option might not work properly or not work at all in some "
 "UNIX/Linux distributions. If you encounter a problem when using this option, "
 "please check the FAQ section at http://konqueror.kde.org.\n"
 "</qt>"
 msgstr ""
 "<qt>\n"
 "自動偵測並設定代理伺服器設定值。<p>\n"
 "自動偵測是使用 <b>網頁代理伺服器自動發現協定 (WPAD)</b> 進行的。<p>\n"
 "<b>注意：</b>這個選項在某些 UNIX/Linux 散布版可能無法正常運作或者完全無法運"
 "作。如果您在使用這個選項時遇到問題，請查閱在 http://konqueror.kde.org 的 FAQ "
 "章節。\n"
 "</qt>"
 
 #. i18n: ectx: property (text), widget (QRadioButton, autoDiscoverProxyRadioButton)
 #: kcms/kio/kproxydlg.ui:49
 #, kde-format
 msgid "Detect proxy configuration automatically"
 msgstr "自動偵測代理伺服器設定"
 
 #. i18n: ectx: property (whatsThis), widget (QRadioButton, autoScriptProxyRadioButton)
 #: kcms/kio/kproxydlg.ui:59
 #, kde-format
 msgid "Use the specified proxy script to configure the proxy settings."
 msgstr "使用指定的代理伺服器命令稿來設定代理伺服器設定值。"
 
 #. i18n: ectx: property (text), widget (QRadioButton, autoScriptProxyRadioButton)
 #: kcms/kio/kproxydlg.ui:62
 #, kde-format
 msgid "Use proxy auto configuration URL:"
 msgstr "使用代理伺服器自動設定網址："
 
 #. i18n: ectx: property (whatsThis), widget (KUrlRequester, proxyScriptUrlRequester)
 #: kcms/kio/kproxydlg.ui:93
 #, kde-format
 msgid "Enter the address for the proxy configuration script."
 msgstr "請輸入代理伺服器組態命令稿位址。"
 
 #. i18n: ectx: property (whatsThis), widget (QRadioButton, systemProxyRadioButton)
 #: kcms/kio/kproxydlg.ui:117
 #, kde-format
 msgid ""
 "<qt><p>Use proxy settings defined on the system.</p>\n"
 "<p>Some platforms offer system wide proxy configuration information and "
 "selecting this option allows you to use those settings.</p>\n"
 "<p>On Mac platforms</p>\n"
 "<p>On Windows platforms</p>\n"
 "<p>On Unix and Linux platforms, such system proxy settings are usually "
 "defined through environment variables. The following environment variables "
 "are detected and used when present: <b>HTTP_PROXY</b>, <b>HTTPS_PROXY</b>, "
 "<b>FTP_PROXY</b>, <b>NO_PROXY</b>.</p>\n"
 "</qt>"
 msgstr ""
 "<qt><p>使用系統上定義的代理伺服器設定。</p>\n"
 "<p>有些平台會提供系統的代理伺服器資訊。選擇此選項讓您可以直接使用這些設定。</"
 "p>\n"
 "<p>在 Mac 平台上</p>\n"
 "<p>在 Windows 平台上</p>\n"
 "<p>在 Unix and Linux 平台上，這些系統端的代理伺服器設定通常是透過環境變數指"
 "定。以下的環境變數若有偵測到就會使用： <b>HTTP_PROXY</b>，<b>HTTPS_PROXY</"
 "b>，<b>FTP_PROXY</b> 以及 <b>NO_PROXY</b>。</p>\n"
 "</qt>"
 
 #. i18n: ectx: property (text), widget (QRadioButton, systemProxyRadioButton)
 #: kcms/kio/kproxydlg.ui:120
 #, kde-format
 msgid "Use system proxy configuration:"
 msgstr "使用系統代理伺服器設定："
 
 #. i18n: ectx: property (whatsThis), widget (QPushButton, autoDetectButton)
 #: kcms/kio/kproxydlg.ui:127
 #, kde-format
 msgid ""
 "<qt>Attempt automatic discovery of the environment variables used for "
 "setting system wide proxy information.<p> This feature works by searching "
 "for commonly used variable names such as HTTP_PROXY, FTP_PROXY and NO_PROXY."
 "</qt>"
 msgstr ""
 "<qt>自動尋找系統中可能是用來設定 proxy 的環境變數。<p>尋找方法是搜尋一些可能"
 "的變數名稱，像是 HTTP_PROXY, FTP_PROXY 和 NO_PROXY.</qt>"
 
 #. i18n: ectx: property (text), widget (QPushButton, autoDetectButton)
 #: kcms/kio/kproxydlg.ui:130
 #, kde-format
 msgid "Auto D&etect"
 msgstr "自動偵測(&E)"
 
 #. i18n: ectx: property (whatsThis), widget (QLabel, systemProxyHttpLabel)
 #. i18n: ectx: property (whatsThis), widget (KLineEdit, systemProxyHttpEdit)
 #: kcms/kio/kproxydlg.ui:158 kcms/kio/kproxydlg.ui:183
 #, kde-format
 msgid ""
 "<qt>\n"
 "Enter the name of the environment variable, e.g. <b>HTTP_PROXY</b>, used to "
 "store the address of the HTTP proxy server.<p>\n"
 "Alternatively, you can click on the <b>\"Auto Detect\"</b> button to attempt "
 "automatic discovery of this variable.</p>\n"
 "</qt>"
 msgstr ""
 "<qt>\n"
 "請輸入環境變數名稱，例如 <tt>HTTP_PROXY</tt>，這是用來儲存 HTTP 代理伺服器的"
 "位址。<p>\n"
 "或者，您也可以單擊 <b>「自動偵測」</b> 按鈕試著自動取得此變數。</p>\n"
 "</qt>"
 
 #. i18n: ectx: property (text), widget (QLabel, systemProxyHttpLabel)
 #. i18n: ectx: property (text), widget (QLabel, manualProxyHttpEditLabel)
 #: kcms/kio/kproxydlg.ui:161 kcms/kio/kproxydlg.ui:383
 #, kde-format
 msgid "HTTP Proxy:"
 msgstr "HTTP 代理伺服器："
 
 #. i18n: ectx: property (whatsThis), widget (QLabel, systemProxyHttpsLabel)
 #. i18n: ectx: property (whatsThis), widget (KLineEdit, systemProxyHttpsEdit)
 #: kcms/kio/kproxydlg.ui:193 kcms/kio/kproxydlg.ui:218
 #, kde-format
 msgid ""
 "<qt>\n"
 "Enter the name of the environment variable, e.g. <b>HTTPS_PROXY</b>, used to "
 "store the address of the HTTPS proxy server.<p>\n"
 "Alternatively, you can click on the <b>\"Auto Detect\"</b> button to attempt "
 "an automatic discovery of this variable.</p>\n"
 "</qt>"
 msgstr ""
 "<qt>\n"
 "請輸入環境變數名稱，例如 <tt>HTTPS_PROXY</tt>，這是用來儲存 HTTPS 代理伺服器"
 "的位址。<p>\n"
 "或者，您也可以單擊 <b>「自動偵測」</b> 按鈕試著自動取得此變數。</p>\n"
 "</qt>"
 
 #. i18n: ectx: property (text), widget (QLabel, systemProxyHttpsLabel)
 #. i18n: ectx: property (text), widget (QLabel, manualProxyHttpsEditLabel)
 #: kcms/kio/kproxydlg.ui:196 kcms/kio/kproxydlg.ui:449
 #, kde-format
 msgid "SSL Proxy:"
 msgstr "SSL 代理伺服器："
 
 #. i18n: ectx: property (whatsThis), widget (QLabel, systemProxyFtpLabel)
 #. i18n: ectx: property (whatsThis), widget (KLineEdit, systemProxyFtpEdit)
 #: kcms/kio/kproxydlg.ui:228 kcms/kio/kproxydlg.ui:253
 #, kde-format
 msgid ""
 "<qt>\n"
 "Enter the name of the environment variable, e.g. <b>FTP_PROXY</b>, used to "
 "store the address of the FTP proxy server.<p>\n"
 "Alternatively, you can click on the <b>\"Auto Detect\"</b> button to attempt "
 "an automatic discovery of this variable.</p>\n"
 "</qt>"
 msgstr ""
 "<qt>\n"
 "請輸入環境變數名稱，例如 <tt>FTP_PROXY</tt>，這是用來儲存 FTP 代理伺服器的位"
 "址。<p>\n"
 "或者，您也可以單擊 <b>「自動偵測」</b> 按鈕試著自動取得此變數。</p>\n"
 "</qt>"
 
 #. i18n: ectx: property (text), widget (QLabel, systemProxyFtpLabel)
 #. i18n: ectx: property (text), widget (QLabel, manualProxyFtpEditLabel)
 #: kcms/kio/kproxydlg.ui:231 kcms/kio/kproxydlg.ui:499
 #, kde-format
 msgid "FTP Proxy:"
 msgstr "FTP 代理伺服器："
 
 #. i18n: ectx: property (whatsThis), widget (QLabel, systemProxySocksLabel)
 #: kcms/kio/kproxydlg.ui:263
 #, kde-format
 msgid ""
 "<qt>\n"
 "Enter the name of the environment variable, e.g. <b>SOCKS_PROXY</b>, used to "
 "store the address of the SOCKS proxy server.<p>\n"
 "Alternatively, you can click on the <b>\"Auto Detect\"</b> button to attempt "
 "an automatic discovery of this variable.</p>\n"
 "</qt>"
 msgstr ""
 "<qt>\n"
 "請輸入環境變數名稱，例如 <tt>SOCKS_PROXY</tt>，這是用來儲存 SOCKS 代理伺服器"
 "的位址。<p>\n"
 "或者，您也可以單擊 <b>「自動偵測」</b> 按鈕試著自動取得此變數。</p>\n"
 "</qt>"
 
 #. i18n: ectx: property (text), widget (QLabel, systemProxySocksLabel)
 #. i18n: ectx: property (text), widget (QLabel, manualProxySocksEditLabel)
 #: kcms/kio/kproxydlg.ui:266 kcms/kio/kproxydlg.ui:552
 #, kde-format
 msgid "SOCKS Proxy:"
 msgstr "SOCKS 代理伺服器："
 
 #. i18n: ectx: property (whatsThis), widget (KLineEdit, systemProxySocksEdit)
 #: kcms/kio/kproxydlg.ui:285
 #, kde-format
 msgid ""
 "<qt>Enter the name of the environment variable, e.g. <b>SOCKS_PROXY</b>, "
 "used to store the address of the SOCKS proxy server.<p>Alternatively, you "
 "can click on the <b>\"Auto Detect\"</b> button to attempt an automatic "
 "discovery of this variable.</p></qt>"
 msgstr ""
 "<qt>\n"
 "請輸入環境變數名稱，例如 <tt>SOCKS_PROXY</tt>，這是用來儲存 SOCKS 代理伺服器"
 "的位址。<p>\n"
 "或者，您也可以單擊 <b>「自動偵測」</b> 按鈕試著自動取得此變數。</p>\n"
 "</qt>"
 
 #. i18n: ectx: property (whatsThis), widget (QLabel, sysNoProxyLabel)
 #. i18n: ectx: property (whatsThis), widget (QLabel, manNoProxyLabel)
 #: kcms/kio/kproxydlg.ui:295 kcms/kio/kproxydlg.ui:599
 #, kde-format
 msgid ""
 "<qt>\n"
 "Enter the environment variable, e.g. <b>NO_PROXY</b>, used to store the "
 "addresses of sites for which the proxy server should not be used.<p>\n"
 "Alternatively, you can click on the <b>\"Auto Detect\"</b> button to attempt "
 "an automatic discovery of this variable.\n"
 "</qt>"
 msgstr ""
 "<qt>\n"
 "請輸入環境變數名稱，例如 <tt>FTP_PROXY</tt>，這是用來儲存 FTP 代理伺服器的位"
 "址。<p>\n"
 "或者，您也可以單擊 <b>「自動偵測」</b> 按鈕試著自動取得此變數。\n"
 "</qt>"
 
 #. i18n: ectx: property (text), widget (QLabel, sysNoProxyLabel)
 #. i18n: ectx: property (text), widget (QLabel, manNoProxyLabel)
 #: kcms/kio/kproxydlg.ui:298 kcms/kio/kproxydlg.ui:602
 #, kde-format
 msgid "Exceptions:"
 msgstr "例外："
 
 #. i18n: ectx: property (whatsThis), widget (KLineEdit, systemNoProxyEdit)
 #: kcms/kio/kproxydlg.ui:317
 #, kde-format
 msgid ""
 "<qt>Enter the environment variable, e.g. <b>NO_PROXY</b>, used to store the "
 "addresses of sites for which the above proxy settings should not be used."
 "<p>Alternatively, you can click on the <b>\"Auto Detect\"</b> button to "
 "attempt an automatic discovery of this variable.</p></qt>"
 msgstr ""
 "<qt>請輸入用於排除使用代理伺服器的位址的環境變數，如 <b>NO_PROXY</b>。\n"
 "<p>或者，您也可以點擊<b>「自動偵測」</b>來自動找出變數。</p></qt>"
 
 #. i18n: ectx: property (text), widget (QCheckBox, showEnvValueCheckBox)
 #: kcms/kio/kproxydlg.ui:324
 #, kde-format
 msgid "Show the &value of the environment variables"
 msgstr "顯示環境變數(&V)"
 
 #. i18n: ectx: property (whatsThis), widget (QRadioButton, manualProxyRadioButton)
 #: kcms/kio/kproxydlg.ui:343
 #, kde-format
 msgid "Manually enter proxy server configuration information."
 msgstr "手動輸入代理伺服器的設定資訊。"
 
 #. i18n: ectx: property (text), widget (QRadioButton, manualProxyRadioButton)
 #: kcms/kio/kproxydlg.ui:346
 #, kde-format
 msgid "Use manually specified proxy configuration:"
 msgstr "手動輸入代理伺服器設定："
 
 #. i18n: ectx: property (whatsThis), widget (KLineEdit, manualProxyHttpEdit)
 #: kcms/kio/kproxydlg.ui:398
 #, kde-format
 msgid "Enter the address of the HTTP proxy server."
 msgstr "請輸入 HTTP 代理伺服器位址。"
 
 #. i18n: ectx: property (text), widget (QLabel, manualProxyHttpSpinBoxLabel)
 #. i18n: ectx: property (text), widget (QLabel, manualProxyHttpsSpinBoxLabel)
 #. i18n: ectx: property (text), widget (QLabel, manualProxyFtpSpinBoxLabel)
 #. i18n: ectx: property (text), widget (QLabel, manualProxySocksSpinBoxLabel)
 #: kcms/kio/kproxydlg.ui:405 kcms/kio/kproxydlg.ui:471
 #: kcms/kio/kproxydlg.ui:524 kcms/kio/kproxydlg.ui:574
 #, kde-format
 msgid "Port:"
 msgstr "連接埠："
 
 #. i18n: ectx: property (whatsThis), widget (QSpinBox, manualProxyHttpSpinBox)
 #: kcms/kio/kproxydlg.ui:421
 #, kde-format
 msgid "Enter the port number of the HTTP proxy server."
 msgstr "請輸入 HTTP 代理伺服器位址。"
 
 #. i18n: ectx: property (text), widget (QCheckBox, useSameProxyCheckBox)
 #: kcms/kio/kproxydlg.ui:436
 #, kde-format
 msgid "Use this proxy server for a&ll protocols"
 msgstr "所有通訊協定都使用此代理伺服器(&L)"
 
 #. i18n: ectx: property (whatsThis), widget (KLineEdit, manualProxyHttpsEdit)
 #: kcms/kio/kproxydlg.ui:464
 #, kde-format
 msgid "Enter the address of the HTTPS proxy server."
 msgstr "請輸入 HTTPS 代理伺服器位址。"
 
 #. i18n: ectx: property (whatsThis), widget (QSpinBox, manualProxyHttpsSpinBox)
 #: kcms/kio/kproxydlg.ui:481
 #, kde-format
 msgid "Enter the port number of the HTTPS proxy server."
 msgstr "請輸入 HTTPS 代理伺服器位址。"
 
 #. i18n: ectx: property (whatsThis), widget (KLineEdit, manualProxyFtpEdit)
 #: kcms/kio/kproxydlg.ui:517
 #, kde-format
 msgid "Enter the address of the FTP proxy server."
 msgstr "請輸入 FTP 代理伺服器位址。"
 
 #. i18n: ectx: property (whatsThis), widget (QSpinBox, manualProxyFtpSpinBox)
 #: kcms/kio/kproxydlg.ui:534
 #, kde-format
 msgid "Enter the port number of the FTP proxy server."
 msgstr "請輸入 FTP 代理伺服器位址。"
 
 #. i18n: ectx: property (whatsThis), widget (KLineEdit, manualProxySocksEdit)
 #: kcms/kio/kproxydlg.ui:567
 #, kde-format
 msgid "Enter the address of the SOCKS proxy server."
 msgstr "請輸入 SOCKS 代理伺服器位址。"
 
 #. i18n: ectx: property (whatsThis), widget (QSpinBox, manualProxySocksSpinBox)
 #: kcms/kio/kproxydlg.ui:584
 #, kde-format
 msgid "Enter the port number of the SOCKS proxy server."
 msgstr "請輸入 SOCKS 代理伺服器位址。"
 
 #. i18n: ectx: property (whatsThis), widget (KLineEdit, manualNoProxyEdit)
 #: kcms/kio/kproxydlg.ui:628
 #, kde-format
 msgid ""
 "<qt>\n"
 "<p>Enter a comma separated list of hostnames or ip addresses that should be "
 "excluded from using the above proxy settings.</p>\n"
 "<p>If you want to exclude all hosts for a given domain, then simply enter "
 "the domain name preceded by a dot. For example, to exclude all hostnames for "
 "<i>kde.org</i>, enter <i>.kde.org</i>. Wildcard characters such as '*' or "
 "'?' are not supported and will have no effect.</p>\n"
 "<p>Additionally, you can also enter IP addresses, e.g. 127.0.0.1 and IP "
 "addresses with a subnet, e.g. 192.168.0.1/24.</p>\n"
 "</qt>"
 msgstr ""
 "<qt>\n"
 "<p>輸入要排除適用於上面所列的代理伺服器的主機名稱或 IP 位址，以逗號分隔。</"
 "p>\n"
 "<p>若您要排除某個網域裡所有的主機，那麼只要輸入該網域名稱，前面加個點 (.)。例"
 "如，要排除所有 <i>kde.org</i> 的主機，您只要輸入 <i>.kde.org</i>。注意，萬用"
 "字元如 '*' 或 '?' 在此不適用。</p>\n"
 "<p>此外，您也可以輸入 IP 位址，如 127.0.0.1，或是同時加上子網域遮罩，如 "
 "192.168.0.1/24。</p>\n"
 "</qt>"
 
 #. i18n: ectx: property (whatsThis), widget (QCheckBox, useReverseProxyCheckBox)
 #: kcms/kio/kproxydlg.ui:639
 #, kde-format
 msgid ""
 "<qt>\n"
 "Check this box if you want the above proxy settings to apply only to the "
 "addresses listed in the <i>Exceptions</i> list.</qt>"
 msgstr ""
 "<qt>\n"
 "勾選此選項，將只有在「例外」清單中的主機與 IP 才使用代理伺服器。</qt>"
 
 #. i18n: ectx: property (text), widget (QCheckBox, useReverseProxyCheckBox)
 #: kcms/kio/kproxydlg.ui:642
 #, kde-format
 msgid "Use proxy settings only for addresses in the Exceptions list"
 msgstr "只有在例外清單中的主機與 IP 才使用代理伺服器"
 
 #: kcms/kio/ksaveioconfig.cpp:224
 #, kde-format
 msgid ""
 "You have to restart the running applications for these changes to take "
 "effect."
 msgstr "您必須重新啟動執行中的程式才能讓這些改變生效。"
 
 #: kcms/kio/ksaveioconfig.cpp:226 kcms/kio/ksaveioconfig.cpp:240
 #, kde-format
 msgctxt "@title:window"
 msgid "Update Failed"
 msgstr "更新失敗"
 
 #: kcms/kio/ksaveioconfig.cpp:239
 #, kde-format
 msgid "You have to restart KDE for these changes to take effect."
 msgstr "您必須重新啟動 KDE 才能讓這些改變生效。"
 
 #: kcms/kio/netpref.cpp:31
 #, kde-format
 msgid "Timeout Values"
 msgstr "逾時設定"
 
 #: kcms/kio/netpref.cpp:32
 #, kde-format
 msgid ""
 "Here you can set timeout values. You might want to tweak them if your "
 "connection is very slow. The maximum allowed value is 1 second."
 msgid_plural ""
 "Here you can set timeout values. You might want to tweak them if your "
 "connection is very slow. The maximum allowed value is %1 seconds."
 msgstr[0] ""
 "您可以在此設定逾時時間。當連線速度很慢時，您可能會想調整它。 最大的允許值是 "
 "%1 秒。"
 
 #: kcms/kio/netpref.cpp:44 kcms/kio/netpref.cpp:51 kcms/kio/netpref.cpp:58
 #: kcms/kio/netpref.cpp:65
 #, kde-format
 msgid " second"
 msgid_plural " seconds"
 msgstr[0] " 秒"
 
 #: kcms/kio/netpref.cpp:47
 #, kde-format
 msgid "Soc&ket read:"
 msgstr "讀取 Socket(&K):"
 
 #: kcms/kio/netpref.cpp:54
 #, kde-format
 msgid "Pro&xy connect:"
 msgstr "連結代理伺服器(&X):"
 
 #: kcms/kio/netpref.cpp:61
 #, kde-format
 msgid "Server co&nnect:"
 msgstr "連結伺服器(&N):"
 
 #: kcms/kio/netpref.cpp:68
 #, kde-format
 msgid "&Server response:"
 msgstr "伺服器回應(&S):"
 
 #: kcms/kio/netpref.cpp:70
 #, kde-format
 msgid "Global Options"
 msgstr "全域選項"
 
 #: kcms/kio/netpref.cpp:74 kcms/kio/netpref.cpp:98
 #, kde-format
 msgid "Mark &partially uploaded files"
 msgstr "標記部分上傳的檔案(&P)"
 
 #: kcms/kio/netpref.cpp:75
 #, kde-format
 msgid ""
 "<p>Marks partially uploaded files through SMB, SFTP and other protocols.</"
 "p><p>When this option is enabled, partially uploaded files will have a \"."
 "part\" extension. This extension will be removed once the transfer is "
 "complete.</p>"
 msgstr ""
 "<p>標記已經透過 SMB、SFTP 與其他協定部分上傳的檔案。</p><p>當此啟用選項時，只"
 "上傳部分的檔案會加上「.part」的延伸檔名。這個延伸檔名會在傳輸全部完成後移除。"
 "</p>"
 
 #: kcms/kio/netpref.cpp:86
 #, kde-format
 msgid "FTP Options"
 msgstr "FTP 選項"
 
 #: kcms/kio/netpref.cpp:90
 #, kde-format
 msgid "Enable passive &mode (PASV)"
 msgstr "啟用被動模式(PASV)(&M)"
 
 #: kcms/kio/netpref.cpp:91
 #, kde-format
 msgid ""
 "Enables FTP's \"passive\" mode. This is required to allow FTP to work from "
 "behind firewalls."
 msgstr "啟用 FTP 的「被動」模式。要讓 FTP 在防火牆下運作的話這是必要的。"
 
 #: kcms/kio/netpref.cpp:99
 #, kde-format
 msgid ""
 "<p>Marks partially uploaded FTP files.</p><p>When this option is enabled, "
 "partially uploaded files will have a \".part\" extension. This extension "
 "will be removed once the transfer is complete.</p>"
 msgstr ""
 "<p>標記已經部分上傳的 FTP 檔案。</p><p>當此啟用選項時，只上傳部分的檔案會加上"
 "「.part」的延伸檔名。這個延伸檔名會在傳輸全部完成後移除。</p>"
 
 #: kcms/kio/netpref.cpp:174
 #, kde-format
 msgid ""
 "<h1>Network Preferences</h1>Here you can define the behavior of KDE programs "
 "when using Internet and network connections. If you experience timeouts or "
 "use a modem to connect to the Internet, you might want to adjust these "
 "settings."
 msgstr ""
 "<h1>網路設定</h1>您可以在這裡設定KDE程式使用網際網路及區域網路的行為。若您有"
 "逾時問題或使用數據機，您或許會想調整這些設定。"
 
 #: kcms/kio/smbrodlg.cpp:48
 #, kde-format
 msgid "These settings apply to network browsing only."
 msgstr "這些設定只會套用到網路瀏覽。"
 
 #: kcms/kio/smbrodlg.cpp:52
 #, kde-format
 msgid "Default user name:"
 msgstr "預設使用者名稱:"
 
 #: kcms/kio/smbrodlg.cpp:60
 #, kde-format
 msgid "Default password:"
 msgstr "預設密碼:"
 
 #: kcms/kio/smbrodlg.cpp:179
 #, kde-format
 msgid ""
 "<h1>Windows Shares</h1><p>Applications using the SMB kioslave (like "
 "Konqueror) are able to access shared Microsoft Windows file systems, if "
 "properly configured.</p><p>You can specify here the credentials used to "
 "access the shared resources. Passwords will be stored locally, and scrambled "
 "so as to render them unreadable to the human eye. For security reasons, you "
 "may not want to do that, as entries with passwords are clearly indicated as "
 "such.</p>"
 msgstr ""
 "<h1>Windows 分享</h1><p>使用 SMB kioslave 的應用程式 （如 Konqueror）可以存取"
 "共享的 Microsoft Windows 檔案系統，前提是如果有正確設定的話。</p><p>您可以在"
 "此指定要用於存取共享資源的憑證。密碼將會儲存在本機，並加一點干擾用的東西，讓"
 "肉眼無法直接讀出它們。出於安全性的理由，您可能不會想這 樣做，因為密碼被明確的"
 "指出來了。</p>"
 
 #: kcms/kio/useragentdlg.cpp:81
 #, kde-format
 msgctxt "@title:window"
 msgid "Add Identification"
 msgstr "新增識別"
 
 #: kcms/kio/useragentdlg.cpp:147
 #, kde-format
 msgctxt "@title:window"
 msgid "Modify Identification"
 msgstr "修改識別"
 
 #: kcms/kio/useragentdlg.cpp:195
 #, kde-format
 msgid ""
 "<qt><center>Found an existing identification for<br/><b>%1</b><br/>Do you "
 "want to replace it?</center></qt>"
 msgstr ""
 "<qt><center>找到既存之關於<br/><b>%1</b><br/>的識別碼，您是否要置換它？</"
 "center></qt>"
 
 #: kcms/kio/useragentdlg.cpp:200
 #, kde-format
 msgctxt "@title:window"
 msgid "Duplicate Identification"
 msgstr "重複的識別"
 
 #: kcms/kio/useragentdlg.cpp:372
 #, kde-format
 msgid ""
 "<h1>Browser Identification</h1><p>The browser-identification module allows "
 "you to have full control over how KDE applications using the HTTP protocol "
 "(like Konqueror) will identify itself to web sites you browse.</p><p>This "
 "ability to fake identification is necessary because some web sites do not "
 "display properly when they detect that they are not talking to current "
 "versions of either Netscape Navigator or Internet Explorer, even if the "
 "browser actually supports all the necessary features to render those pages "
 "properly. For such sites, you can use this feature to try to browse them. "
 "Please understand that this might not always work, since such sites might be "
 "using non-standard web protocols and or specifications.</p><p><u>NOTE:</u> "
 "To obtain specific help on a particular section of the dialog box, simply "
 "click on the quick help button on the window title bar, then click on the "
 "section for which you are seeking help.</p>"
 msgstr ""
 "<h1>瀏覽器識別碼</h1><p>瀏覽器識別碼控制視窗提供您來控制那些使用 HTTP 協定的"
 "應用程式（如 Konqueror）回報遠端網站的資訊。</p> <p> 這項功能提供了必要的偽裝"
 "的識別碼，這是因為某些網站在未能偵測到Netscape Navigator 或 Internet "
 "Explorer 時無法正常顯示，即使這些「未支援的瀏覽器」實際上支援必須的功能並能正"
 "常的顯示。因此您必須更改預設的瀏覽器識別碼來瀏覽這些網站。</p> <p><u>注意：</"
 "u>要獲得對話盒特定部分的說明，只要按下視窗標題列的快速說明按鈕，然後按下您想"
 "求助的段落。</p>"
 
 #. i18n: ectx: property (whatsThis), widget (QWidget, UserAgentUI)
 #: kcms/kio/useragentdlg.ui:17
 #, kde-format
 msgid ""
 "<qt>\n"
 "Here you can modify the default browser-identification text or set a site "
 "<code>(eg. www.kde.org)</code> or a domain <code>(eg. kde.org)</code> "
 "specific identification text.<p>\n"
 "To add a new site-specific identification text, click the <code>New</code> "
 "button and supply the necessary information. To change an existing site-"
 "specific entry, click on the <code>Change</code> button. The <code>Delete</"
 "code> button will remove the selected site-specific identification text, "
 "causing the default setting to be used for that site or domain.\n"
 "</qt>"
 msgstr ""
 "<qt>\n"
 "您可以在這邊修改網站<code>(如www.kde.org)</code>或網域<code>(如kde.org)</"
 "code>的預設瀏覽器識別碼。<p>\n"
 "要增加新的特定網站識別文字，只要單擊 <code>新增</code>按鈕，並提供對話窗中所"
 "需的資訊。要變更一個現存的網站識別項目，單擊 <code>變更</code>按鈕。<code>刪"
 "除</code>按鈕將會移除您所選擇的特定網站識別文字，並將預設的設定使用於該網站或"
 "網域。\n"
 "</qt>"
 
 #. i18n: ectx: property (whatsThis), widget (QCheckBox, sendUACheckBox)
 #: kcms/kio/useragentdlg.ui:27
 #, kde-format
 msgid ""
 "<qt>\n"
 "Send the browser identification to web sites.<p>\n"
 "<u>NOTE:</u> Many sites rely on this information to display pages properly, "
 "hence, it is highly recommended that you do not totally disable this feature "
 "but rather customize it.<p>\n"
 "By default, only minimal identification information is sent to remote sites. "
 "The identification text that will be sent is shown below.\n"
 "</qt>"
 msgstr ""
 "<qt>\n"
 "送出瀏覽器識別碼給網站。<p>\n"
 "<u>注意：</u>許多網站需要這類訊息來使得網頁能正常顯示，因此強烈地建議您不要關"
 "掉所有的選項，但您可以自行設定。<p>\n"
 "預設的情況，只有最少的識別碼資訊會送至遠端網站。要送出的識別文字會顯示在下"
 "面。\n"
 "</qt>"
 
 #. i18n: ectx: property (text), widget (QCheckBox, sendUACheckBox)
 #: kcms/kio/useragentdlg.ui:30
 #, kde-format
 msgid "&Send identification"
 msgstr "送出識別字串(&S)"
 
 #. i18n: ectx: property (whatsThis), widget (QGroupBox, defaultIdGroupBox)
 #: kcms/kio/useragentdlg.ui:43
 #, kde-format
 msgid ""
 "The browser identification text sent to the sites you visit. Use the "
 "provided options to customize it."
 msgstr "將瀏覽器資訊送給瀏覽的網站。你可以使用提供的選項來自訂。"
 
 #. i18n: ectx: property (title), widget (QGroupBox, defaultIdGroupBox)
 #: kcms/kio/useragentdlg.ui:46
 #, kde-format
 msgid "Default Identification"
 msgstr "預設的識別碼"
 
 #. i18n: ectx: property (whatsThis), widget (KSqueezedTextLabel, defaultIdLineEdit)
 #: kcms/kio/useragentdlg.ui:58
 #, kde-format
 msgid ""
 "The browser identification text sent to the sites you visit. You can "
 "customize it using the options provided below."
 msgstr "這是在瀏覽時將送至遠端網站之瀏覽器識別碼。您可以利用下列選項自訂它。"
 
 #. i18n: ectx: property (whatsThis), widget (QCheckBox, osNameCheckBox)
 #: kcms/kio/useragentdlg.ui:71
 #, kde-format
 msgid ""
 "Includes your operating system's name in the browser identification text."
 msgstr "在瀏覽器識別碼中包含您的作業系統名稱。"
 
 #. i18n: ectx: property (text), widget (QCheckBox, osNameCheckBox)
 #: kcms/kio/useragentdlg.ui:74
 #, kde-format
 msgid "Add operating s&ystem name"
 msgstr "新增作業系統名稱(&Y)"
 
 #. i18n: ectx: property (whatsThis), widget (QCheckBox, osVersionCheckBox)
 #: kcms/kio/useragentdlg.ui:102
 #, kde-format
 msgid ""
 "Includes your operating system's version number in the browser "
 "identification text."
 msgstr "在瀏覽器識別碼中包含您的作業系統版本。"
 
 #. i18n: ectx: property (text), widget (QCheckBox, osVersionCheckBox)
 #: kcms/kio/useragentdlg.ui:105
 #, kde-format
 msgid "Add operating system &version"
 msgstr "新增作業系統版本(&V)"
 
 #. i18n: ectx: property (whatsThis), widget (QCheckBox, processorTypeCheckBox)
 #: kcms/kio/useragentdlg.ui:115
 #, kde-format
 msgid "Includes your machine's CPU type in the browser identification text."
 msgstr "在瀏覽器識別碼中包含您的電腦 CPU 類型。"
 
 #. i18n: ectx: property (text), widget (QCheckBox, processorTypeCheckBox)
 #: kcms/kio/useragentdlg.ui:118
 #, kde-format
 msgid "Add &machine (processor) type"
 msgstr "新增機器(處理器)型號(&M)"
 
 #. i18n: ectx: property (whatsThis), widget (QCheckBox, languageCheckBox)
 #: kcms/kio/useragentdlg.ui:127
 #, kde-format
 msgid ""
 "Includes your language settings in the browser identification text to obtain "
 "localized versions of the page."
 msgstr "在瀏覽器識別碼中包含您的語言設定。"
 
 #. i18n: ectx: property (text), widget (QCheckBox, languageCheckBox)
 #: kcms/kio/useragentdlg.ui:130
 #, kde-format
 msgid "Add lang&uage information"
 msgstr "加入語言資訊(&U)"
 
 #. i18n: ectx: property (title), widget (QGroupBox, domainPolicyGroupBox)
 #: kcms/kio/useragentdlg.ui:143
 #, kde-format
 msgid "Site Specific Identification"
 msgstr "特定網站識別碼"
 
 #. i18n: ectx: property (text), widget (QTreeWidget, sitePolicyTreeWidget)
 #: kcms/kio/useragentdlg.ui:156
 #, kde-format
 msgid "Site Name"
 msgstr "網站名稱"
 
 #. i18n: ectx: property (text), widget (QTreeWidget, sitePolicyTreeWidget)
 #: kcms/kio/useragentdlg.ui:161
 #, kde-format
 msgid "Identification"
 msgstr "識別"
 
 #. i18n: ectx: property (text), widget (QTreeWidget, sitePolicyTreeWidget)
 #: kcms/kio/useragentdlg.ui:166
 #, kde-format
 msgid "User Agent"
 msgstr "使用者代理"
 
 #. i18n: ectx: property (whatsThis), widget (QPushButton, newButton)
 #: kcms/kio/useragentdlg.ui:179
 #, kde-format
 msgid "Add new identification text for a site."
 msgstr "新增特定網站的識別碼。"
 
 #. i18n: ectx: property (whatsThis), widget (QPushButton, changeButton)
 #: kcms/kio/useragentdlg.ui:189
 #, kde-format
 msgid "Change the selected identifier text."
 msgstr "改變選擇的識別碼。"
 
 #. i18n: ectx: property (whatsThis), widget (QPushButton, deleteButton)
 #: kcms/kio/useragentdlg.ui:199
 #, kde-format
 msgid "Delete the selected identifier text."
 msgstr "刪除選擇的識別碼。"
 
 #. i18n: ectx: property (whatsThis), widget (QPushButton, deleteAllButton)
 #: kcms/kio/useragentdlg.ui:209
 #, kde-format
 msgid "Delete all identifiers."
 msgstr "等等等等刪除全部的識別碼。"
 
 #. i18n: ectx: property (whatsThis), widget (QLabel, siteLabel)
 #. i18n: ectx: property (whatsThis), widget (QLineEdit, siteLineEdit)
 #: kcms/kio/useragentselectordlg.ui:19 kcms/kio/useragentselectordlg.ui:38
 #, kde-format
 msgid ""
 "<qt>\n"
 "Enter the site or domain name where a fake browser identification should be "
 "used.<p>\n"
 "<u>NOTE:</u> Wildcard syntax such as \\\"*,?\\\" is NOT allowed: instead, "
 "use the top level address of a site to make generic matches; for example, if "
 "you want all KDE sites to receive a fake browser identification, you would "
 "enter <code>kde.org</code> - the fake identity would then be sent to any KDE "
 "site that ends with <code>kde.org</code>.</p>\n"
 "</qt>"
 msgstr ""
 "<qt>\n"
 "請輸入您想使用偽裝識別碼的網址或網域。<p>\n"
 "<u>請注意：</u>您不可以使用萬用字元，如「*,?」。請輸入最頂層的網址讓所有在它"
 "之下找到的網址歸成一類；例如，若您要所有 KDE 網站都收到偽裝識別碼，您要輸入 "
 "<code>kde.org</code> - 偽裝識別碼就會送到任何以 <code>kde.org</code> 結尾的 "
 "KDE 網站。</p>\n"
 "</qt>"
 
 #. i18n: ectx: property (text), widget (QLabel, siteLabel)
 #: kcms/kio/useragentselectordlg.ui:22
 #, kde-format
 msgid "&When browsing the following site:"
 msgstr "當瀏覽下列網址時(&W):"
 
 #. i18n: ectx: property (whatsThis), widget (QLabel, aliasLabel)
 #. i18n: ectx: property (whatsThis), widget (KComboBox, aliasComboBox)
 #: kcms/kio/useragentselectordlg.ui:47 kcms/kio/useragentselectordlg.ui:65
 #, kde-format
 msgid ""
 "<qt>\n"
 "Select the browser identification to use whenever contacting the site you "
 "specified above.\n"
 "</qt>"
 msgstr ""
 "<qt>\n"
 "選擇連結您在上面指定的網址或網域之瀏覽器識別碼。\n"
 "</qt>"
 
 #. i18n: ectx: property (text), widget (QLabel, aliasLabel)
 #: kcms/kio/useragentselectordlg.ui:50
 #, kde-format
 msgid "&Use the following identification:"
 msgstr "使用下列識別碼(&U):"
 
 #. i18n: ectx: property (whatsThis), widget (QLabel, identityLabel)
 #. i18n: ectx: property (whatsThis), widget (QLineEdit, identityLineEdit)
 #: kcms/kio/useragentselectordlg.ui:74 kcms/kio/useragentselectordlg.ui:89
 #, kde-format
 msgid ""
 "<qt>\n"
 "The actual browser identification text that will be sent to the remote "
 "machine.\n"
 "</qt>"
 msgstr ""
 "<qt>\n"
 "這個瀏覽器資訊會被送給遠端機器。\n"
 "</qt>"
 
 #. i18n: ectx: property (text), widget (QLabel, identityLabel)
 #: kcms/kio/useragentselectordlg.ui:77
 #, kde-format
 msgid "Real identification:"
 msgstr "真實的識別"
 
 #: kcms/webshortcuts/main.cpp:40
 #, kde-format
 msgid "Web Shortcuts"
 msgstr "網頁捷徑"
 
 #: kcms/webshortcuts/main.cpp:41
 #, kde-format
 msgid "Configure enhanced browsing features"
 msgstr "設定增強式瀏覽功能"
 
 #: kcms/webshortcuts/main.cpp:49
 #, kde-format
 msgid ""
 "<h1>Enhanced Browsing</h1> In this module you can configure some enhanced "
 "browsing features of KDE. <h2>Web Shortcuts</h2>Web Shortcuts are a quick "
 "way of using Web search engines. For example, type \"duckduckgo:frobozz\" or "
 "\"dd:frobozz\" and your web browser will do a search on DuckDuckGo for "
 "\"frobozz\". Even easier: just press Alt+F2 (if you have not changed this "
 "keyboard shortcut) and enter the shortcut in the Run Command dialog."
 msgstr ""
 "<h1>強化瀏覽</h1>此模組中您可以設定 KDE 的強化瀏覽功能。<h2>網頁捷徑</h2>網頁"
 "捷徑是使用網頁搜尋引擎的快速方法。例如，輸入 \"duckduckgo:frobozz\" 或 \"dd:"
 "frobozz\" 就會在您的瀏覽器中進入 DuckDuckGo 來搜尋 frobozz。您也可以按下 Alt"
 "+F2 並在「執行指令」對話框中直接輸入網頁捷徑。"
 
 #: kioexec/kioexecd.cpp:99
 #, kde-format
 msgid ""
 "The file %1\n"
 "has been modified. Do you want to upload the changes?"
 msgstr ""
 "檔案 %1\n"
 "已經被變更。您是否要上傳改變？"
 
 #: kioexec/kioexecd.cpp:100 kioexec/main.cpp:241 kioexec/main.cpp:246
 #, kde-format
 msgid "File Changed"
 msgstr "檔案已變更"
 
 #: kioexec/kioexecd.cpp:100 kioexec/main.cpp:246
 #, kde-format
 msgid "Upload"
 msgstr "上傳"
 
 #: kioexec/kioexecd.cpp:100 kioexec/main.cpp:246
 #, kde-format
 msgid "Do Not Upload"
 msgstr "不要上傳"
 
 #: kioexec/main.cpp:58
 #, kde-format
 msgid "KIO Exec - Opens remote files, watches modifications, asks for upload"
 msgstr "KIO Exec - 開啟遠端檔案, 檢查變更, 並提示上傳。"
 
 #: kioexec/main.cpp:75
 #, kde-format
 msgid "Invalid URL: %1"
 msgstr "不正確的 URL：%1"
 
 #: kioexec/main.cpp:81
 #, kde-format
 msgid "File not found: %1"
 msgstr "找不到檔案：%1"
 
 #: kioexec/main.cpp:98
 #, kde-format
 msgid ""
 "The URL %1\n"
 "is malformed"
 msgstr ""
 "URL %1\n"
 "是錯誤的"
 
 #: kioexec/main.cpp:100
 #, kde-format
 msgid ""
 "Remote URL %1\n"
 "not allowed with --tempfiles switch"
 msgstr ""
 "遠端 URL %1\n"
 "不能使用 --tempfiles 參數"
 
 #: kioexec/main.cpp:240
 #, kde-format
 msgid ""
 "The supposedly temporary file\n"
 "%1\n"
 "has been modified.\n"
 "Do you still want to delete it?"
 msgstr ""
 "暫存檔案\n"
 "%1\n"
 "已經被變更.\n"
 "您是否還是要刪除?"
 
 #: kioexec/main.cpp:241
 #, kde-format
 msgid "Do Not Delete"
 msgstr "不要刪除"
 
 #: kioexec/main.cpp:245
 #, kde-format
 msgid ""
 "The file\n"
 "%1\n"
 "has been modified.\n"
 "Do you want to upload the changes?"
 msgstr ""
 "檔案\n"
 "%1\n"
 "已經被變更.\n"
 "您是否要上傳改變?"
 
 #: kioexec/main.cpp:276
 #, kde-format
 msgid "KIOExec"
 msgstr "KIOExec"
 
 #: kioexec/main.cpp:278
 #, kde-format
 msgid "(c) 1998-2000,2003 The KFM/Konqueror Developers"
 msgstr "(c) 1998-2000,2003 KFM/Konqueror 開發團隊"
 
 #: kioexec/main.cpp:279
 #, kde-format
 msgid "David Faure"
 msgstr "David Faure"
 
 #: kioexec/main.cpp:280
 #, kde-format
 msgid "Stephan Kulow"
 msgstr "Stephan Kulow"
 
 #: kioexec/main.cpp:281
 #, kde-format
 msgid "Bernhard Rosenkraenzer"
 msgstr "Bernhard Rosenkraenzer"
 
 #: kioexec/main.cpp:282
 #, kde-format
 msgid "Waldo Bastian"
 msgstr "Waldo Bastian"
 
 #: kioexec/main.cpp:283
 #, kde-format
 msgid "Oswald Buddenhagen"
 msgstr "Oswald Buddenhagen"
 
 #: kioexec/main.cpp:288
 #, kde-format
 msgid "Treat URLs as local files and delete them afterwards"
 msgstr "將 URL 視為本地端檔案，並稍後刪除它們"
 
 #: kioexec/main.cpp:289
 #, kde-format
 msgid "Suggested file name for the downloaded file"
 msgstr "下載檔案的建議檔名"
 
 #: kioexec/main.cpp:290
 #, kde-format
 msgid "Command to execute"
 msgstr "要執行的指令."
 
 #: kioexec/main.cpp:291
 #, kde-format
 msgid "URL(s) or local file(s) used for 'command'"
 msgstr "給 '命令' 用的 URL 或本地端檔案."
 
 #: kpac/discovery.cpp:112
 #, kde-format
 msgid "Could not find a usable proxy configuration script"
 msgstr "無法找到可用的代理伺服器組態命令稿"
 
 #: kpac/downloader.cpp:93
 #, kde-format
 msgid ""
 "Could not download the proxy configuration script:\n"
 "%1"
 msgstr ""
 "無法下載代理伺服器組態命令稿：\n"
 "%1"
 
 #: kpac/downloader.cpp:96
 #, kde-format
 msgid "Could not download the proxy configuration script"
 msgstr "無法下載代理伺服器組態命令稿"
 
 #: kpac/proxyscout.cpp:240
 #, kde-format
 msgid ""
 "The proxy configuration script is invalid:\n"
 "%1"
 msgstr ""
 "代理伺服器組態命令稿無效：\n"
 "%1"
 
 #: kpac/proxyscout.cpp:353
 #, kde-format
 msgid ""
 "The proxy configuration script returned an error:\n"
 "%1"
 msgstr ""
 "代理伺服器組態命令稿傳回一個錯誤：\n"
 "%1"
 
 #: kpac/script.cpp:749
 #, kde-format
 msgid "Could not find 'FindProxyForURL' or 'FindProxyForURLEx'"
 msgstr "找不到 'FindProxyForURL' 或 'FindProxyForURLEx'"
 
 #: kpac/script.cpp:767
 #, kde-format
 msgid "Got an invalid reply when calling %1"
 msgstr "呼叫 %1 時得到不合法的回覆"
 
 #: kpasswdserver/kpasswdserver.cpp:563
 #, kde-format
 msgid "Do you want to retry?"
 msgstr "您要重新嘗試嗎？"
 
 #: kpasswdserver/kpasswdserver.cpp:568
 #, kde-format
 msgid "Retry Authentication"
 msgstr "重試認證"
 
 #: kpasswdserver/kpasswdserver.cpp:572
 #, kde-format
 msgctxt "@action:button filter-continue"
 msgid "Retry"
 msgstr "重試"
 
 #: kpasswdserver/kpasswdserver.cpp:866
 #, kde-format
 msgid "Authentication Dialog"
 msgstr "認證對話框"
 
 #: urifilters/ikws/ikwsopts.cpp:54
 #, kde-format
 msgctxt "@title:column Name label from web shortcuts column"
 msgid "Name"
 msgstr "名稱"
 
 #: urifilters/ikws/ikwsopts.cpp:56
 #, kde-format
 msgctxt "@title:column"
 msgid "Shortcuts"
 msgstr "捷徑"
 
 #: urifilters/ikws/ikwsopts.cpp:58
 #, kde-format
 msgctxt "@title:column"
 msgid "Preferred"
 msgstr "偏好"
 
 #: urifilters/ikws/ikwsopts.cpp:107
 #, kde-kuit-format
 msgctxt "@info:tooltip"
 msgid ""
 "Check this box to select the highlighted web shortcut as preferred.<nl/"
 ">Preferred web shortcuts are used in places where only a few select "
 "shortcuts can be shown at one time."
 msgstr ""
 "勾選此選項，可以將突顯的網頁捷徑設為預設。<nl/> 預設的網頁捷徑會在只能顯示少"
 "量的捷徑的地方使用。"
 
 #: urifilters/ikws/ikwsopts.cpp:201
 #, kde-format
 msgctxt "@item:inlistbox No default web shortcut"
 msgid "None"
 msgstr "無"
 
 #: urifilters/ikws/ikwsopts.cpp:264
 #, kde-kuit-format
 msgctxt "@info:whatsthis"
 msgid ""
 "<para>In this module you can configure the web shortcuts feature. Web "
 "shortcuts allow you to quickly search or lookup words on the Internet. For "
 "example, to search for information about the KDE project using the Google "
 "engine, you simply type <emphasis>gg:KDE</emphasis> or <emphasis>google:KDE</"
 "emphasis>.</para><para>If you select a default search engine, then you can "
 "search for normal words or phrases by simply typing them into the input "
 "widget of applications that have built-in support for such a feature, e.g "
 "Konqueror.</para>"
 msgstr ""
 "<para>在此模組中您可以設定網頁的捷徑。網頁捷徑讓您可以快速搜尋或在網路上查詢"
 "某些關鍵字。例如，要在 Google 上查詢 KDE 專案的資訊，您只要輸入 <emphasis>gg:"
 "KDE</emphasis> 或 <emphasis>google:KDE</emphasis> 即可。</para> <para>如果您"
 "選擇了預設的搜尋引擎，只要在像 Konqueror 這類支援內建搜尋引擎的應用程式中，輸"
 "入一般的單字或片語，就會直接在該搜尋引擎上查詢。</para>"
 
 #. i18n: ectx: property (toolTip), widget (QCheckBox, cbEnableShortcuts)
 #: urifilters/ikws/ikwsopts_ui.ui:17
 #, kde-format
 msgid ""
 "<html><head/><body><p>Enable or disable web shortcuts. </p><p>Web shortcuts "
 "allow you to quickly access or search for information located online or on "
 "your hard drive. </p><p>KDE comes with many predefined Web shortcuts. One "
 "such Web shortcut is the Google (TM) search shortcut. To use it, you simply "
 "type the keyword 'gg' followed by the keyword delimiter and the search term, "
 "e.g. <span style=\" font-weight:600;\">gg:KDE</span>.</p></body></html>"
 msgstr ""
 "<html><head/><body><p>開啟或關閉網頁捷徑。</p><p>網頁捷徑讓您可以快速存取或搜"
 "尋線上或硬碟中的資訊。</p> <p>KDE 內建許多預設的網頁捷徑，如 Google (TM) 的搜"
 "尋捷徑。您只要輸入 'gg' 加上關鍵字分隔符 (如 ':') 再加上您要搜尋的字串，如 "
 "<span style=\" font-weight:600;\">gg:KDE</span> 即可在 Google 搜尋 KDE。</"
 "p></body></html>"
 
 #. i18n: ectx: property (text), widget (QCheckBox, cbEnableShortcuts)
 #: urifilters/ikws/ikwsopts_ui.ui:20
 #, kde-format
 msgid "&Enable Web shortcuts"
 msgstr "開啟網頁捷徑(&E)"
 
 #. i18n: ectx: property (text), widget (QCheckBox, cbUseSelectedShortcutsOnly)
 #: urifilters/ikws/ikwsopts_ui.ui:30
 #, kde-format
 msgid "&Use preferred shortcuts only"
 msgstr "只使用預設的捷徑(&U)"
 
 #. i18n: ectx: property (placeholderText), widget (KLineEdit, searchLineEdit)
 #: urifilters/ikws/ikwsopts_ui.ui:37
 #, kde-format
 msgid "Search for shortcut"
 msgstr "搜尋捷徑"
 
 #. i18n: ectx: property (toolTip), widget (QPushButton, pbNew)
 #: urifilters/ikws/ikwsopts_ui.ui:71
 #, kde-format
 msgid "Add a new Web shortcut"
 msgstr "新增網頁捷徑"
 
 #. i18n: ectx: property (toolTip), widget (QPushButton, pbChange)
 #: urifilters/ikws/ikwsopts_ui.ui:84
 #, kde-format
 msgid "Modify the highlighted Web shortcut"
 msgstr "變更選取的網頁捷徑"
 
 #. i18n: ectx: property (toolTip), widget (QPushButton, pbDelete)
 #: urifilters/ikws/ikwsopts_ui.ui:97
 #, kde-format
 msgid "Delete the highlighted Web shortcut"
 msgstr "刪除選取的網頁捷徑"
 
 #. i18n: ectx: property (text), widget (QPushButton, pbDelete)
 #: urifilters/ikws/ikwsopts_ui.ui:100
 #, kde-format
 msgid "De&lete"
 msgstr "刪除(&L)"
 
 #. i18n: ectx: property (whatsThis), widget (QLabel, lbDefaultEngine)
 #: urifilters/ikws/ikwsopts_ui.ui:138
 #, kde-format
 msgid ""
 "<qt>\n"
 "Select the search engine to use for input boxes that provide automatic "
 "lookup services when you type in normal words and phrases instead of a URL. "
 "To disable this feature select <b>None</b> from the list.\n"
 "</qt>"
 msgstr ""
 "<qt>選擇預設要使用的搜尋引擎，當您在網址列直接輸入單字或片語時，會直接使用該"
 "引擎查詢。要關閉此功能，請在清單上選擇「無」。\n"
 "</qt>"
 
 #. i18n: ectx: property (text), widget (QLabel, lbDefaultEngine)
 #: urifilters/ikws/ikwsopts_ui.ui:141
 #, kde-format
 msgid "Default Web &shortcut:"
 msgstr "預設網頁捷徑(&S)"
 
 #. i18n: ectx: property (whatsThis), widget (KComboBox, cmbDefaultEngine)
 #: urifilters/ikws/ikwsopts_ui.ui:166
 #, kde-format
 msgid ""
 "<html><head/><body><p>Select a default web shortcut. </p><p>This allows "
 "applications to automatically convert the typed word or phrase to web "
 "shortcut queries when they cannot be filtered into a proper URL. </p><p>To "
 "disable this functionality select <span style=\" font-weight:600;\">None</"
 "span> from the list. </p></body></html>"
 msgstr ""
 "<html><head/><body><p>選取預設的網頁捷徑。</p><p>讓應用程式在沒辦法產生正確的"
 "網址時，可以自動轉換輸入的單字或片語給網頁捷徑查詢。</p> <p>要關閉此功能，請"
 "在清單中選擇「<span style=\" font-weight:600;\">無</span>」</p></body></html>"
 
 #. i18n: ectx: property (whatsThis), widget (QLabel, lbDelimiter)
 #: urifilters/ikws/ikwsopts_ui.ui:182
 #, kde-format
 msgid ""
 "Choose the delimiter that separates the keyword from the phrase or word to "
 "be searched."
 msgstr "選擇不同的關鍵字或片語要怎麼分隔。"
 
 #. i18n: ectx: property (text), widget (QLabel, lbDelimiter)
 #: urifilters/ikws/ikwsopts_ui.ui:185
 #, kde-format
 msgid "&Keyword delimiter:"
 msgstr "關鍵字分隔符(&K)："
 
 #. i18n: ectx: property (toolTip), widget (KComboBox, cmbDelimiter)
 #: urifilters/ikws/ikwsopts_ui.ui:204
 #, kde-format
 msgid "Choose a delimiter to mark the Web shortcut keyword."
 msgstr "選擇網頁捷徑使用的關鍵字分隔符。"
 
 #. i18n: ectx: property (text), item, widget (KComboBox, cmbDelimiter)
 #: urifilters/ikws/ikwsopts_ui.ui:208
 #, kde-format
 msgctxt "Colon as keyword delimiter"
 msgid "Colon"
 msgstr "冒號"
 
 #. i18n: ectx: property (text), item, widget (KComboBox, cmbDelimiter)
 #: urifilters/ikws/ikwsopts_ui.ui:213
 #, kde-format
 msgctxt "Space as keyword delimiter"
 msgid "Space"
 msgstr "空白"
 
 #: urifilters/ikws/kuriikwsfilter.cpp:123
 #, kde-format
 msgid "No preferred search providers were found."
 msgstr "找不到想要的搜尋提供者。"
 
 #: urifilters/ikws/kuriikwsfilter.cpp:142
 #, kde-format
 msgid "No search providers were found."
 msgstr "找不到搜尋提供者。"
 
 #: urifilters/ikws/kurisearchfilter.cpp:95
 #, kde-format
 msgid "Search F&ilters"
 msgstr "搜尋過濾器(&I)"
 
 #: urifilters/ikws/searchproviderdlg.cpp:58
 #, kde-format
 msgctxt "@item:inlistbox The default character set"
 msgid "Default"
 msgstr "預設"
 
 #: urifilters/ikws/searchproviderdlg.cpp:62
 #, kde-format
 msgid "Modify Web Shortcut"
 msgstr "變更網頁捷徑"
 
 #: urifilters/ikws/searchproviderdlg.cpp:72
 #, kde-format
 msgid "New Web Shortcut"
 msgstr "新增網頁捷徑"
 
 #: urifilters/ikws/searchproviderdlg.cpp:125
 #, kde-format
 msgid ""
 "The shortcut \"%1\" is already assigned to \"%2\". Please choose a different "
 "one."
 msgstr "捷徑 %1 已指定給 %2。請選擇不同的捷徑。"
 
 #: urifilters/ikws/searchproviderdlg.cpp:130
 #, kde-format
 msgctxt "- web short cut (e.g. gg): what it refers to (e.g. Google)"
 msgid "- %1: \"%2\""
 msgstr "- %1: \"%2\""
 
 #: urifilters/ikws/searchproviderdlg.cpp:134
 #, kde-format
 msgid ""
 "The following shortcuts are already assigned. Please choose different ones.\n"
 "%1"
 msgstr ""
 "以下的捷徑已經被指定。請選擇其它的捷徑。\n"
 "%1"
 
 #: urifilters/ikws/searchproviderdlg.cpp:146
 #, kde-format
 msgid ""
 "The Shortcut URL does not contain a \\{...} placeholder for the user query.\n"
 "This means that the same page is always going to be visited, regardless of "
 "the text typed in with the shortcut."
-msgstr ""
-"此捷徑網址不包含 \\{...} 符號。這表示不管輸入什麼文字，都會跑到同一個網址。"
+msgstr "此捷徑網址不包含 \\{...} 符號。這表示不管輸入什麼文字，都會跑到同一個網址。"
 
 #: urifilters/ikws/searchproviderdlg.cpp:149
 #, kde-format
 msgid "Keep It"
 msgstr "保留"
 
 #. i18n: ectx: property (whatsThis), widget (QLabel, lbName)
 #: urifilters/ikws/searchproviderdlg_ui.ui:17
 #, kde-format
 msgid "Enter the human-readable name of the search provider here."
 msgstr "在此輸入搜尋引擎的名稱。"
 
 #. i18n: ectx: property (text), widget (QLabel, lbName)
 #: urifilters/ikws/searchproviderdlg_ui.ui:23
 #, kde-format
 msgid "Shortcut &name:"
 msgstr "捷徑名稱(&N)："
 
 #. i18n: ectx: property (whatsThis), widget (QLabel, lbQuery)
 #. i18n: ectx: property (toolTip), widget (QLineEdit, leQuery)
 #. i18n: ectx: property (whatsThis), widget (QLineEdit, leQuery)
 #: urifilters/ikws/searchproviderdlg_ui.ui:42
 #: urifilters/ikws/searchproviderdlg_ui.ui:64
 #: urifilters/ikws/searchproviderdlg_ui.ui:70
 #, kde-format
 msgid ""
 "<qt>\n"
 "Enter the URI that is used to perform a search on the search engine here.<br/"
 ">The whole text to be searched for can be specified as \\{@} or \\{0}.<br/>\n"
 "Recommended is \\{@}, since it removes all query variables (name=value) from "
 "the resulting string, whereas \\{0} will be substituted with the unmodified "
 "query string.<br/>You can use \\{1} ... \\{n} to specify certain words from "
 "the query and \\{name} to specify a value given by 'name=value' in the user "
 "query.<br/>In addition it is possible to specify multiple references (names, "
 "numbers and strings) at once (\\{name1,name2,...,\"string\"}).<br/>The first "
 "matching value (from the left) will be used as the substitution value for "
 "the resulting URI.<br/>A quoted string can be used as the default value if "
 "nothing matches from the left of the reference list.\n"
 "</qt>"
 msgstr ""
 "<qt>在此輸入搜尋引擎的網址。<br />要搜尋的文字可以用 \\{@} 或 \\{0} 來表示。"
 "<br />\n"
 "建議使用 \\{@}，因為它會將所有查詢變數（name=value）從結果字串中移除，而 "
 "\\{0} 則是會被替換為整個查詢字串。<br /> 您可以用 \\{1} ... \\{n} 來指定查詢"
 "中的特定單字，\\{name} 則是指定 name=value 中的值。<br /> 此外也可以一次指定"
 "多個參考（名稱、數字與字串），如 \\{name1,name2,...,\"string\"}。<br /> 這種"
 "狀況下會替換為第一個符合的值。<br /> 如果 name1 name2 等都不符合，則以 "
 "\"string\" 為預設值。\n"
 "</qt>"
 
 #. i18n: ectx: property (text), widget (QLabel, lbQuery)
 #: urifilters/ikws/searchproviderdlg_ui.ui:48
 #, kde-format
 msgid "Shortcut &URL:"
 msgstr "捷徑網址(&U)："
 
 #. i18n: ectx: property (whatsThis), widget (KComboBox, cbCharset)
 #: urifilters/ikws/searchproviderdlg_ui.ui:83
 #, kde-format
 msgid "Select the character set that will be used to encode your search query."
 msgstr "選擇您的查詢字串所使用的字元集。"
 
 #. i18n: ectx: property (toolTip), widget (QLineEdit, leShortcut)
 #. i18n: ectx: property (whatsThis), widget (QLineEdit, leShortcut)
 #. i18n: ectx: property (whatsThis), widget (QLabel, lbShortcut)
 #: urifilters/ikws/searchproviderdlg_ui.ui:92
 #: urifilters/ikws/searchproviderdlg_ui.ui:97
 #: urifilters/ikws/searchproviderdlg_ui.ui:116
 #, kde-format
 msgid ""
 "<qt>\n"
 "The shortcuts entered here can be used as a pseudo-URI scheme in KDE. For "
 "example, the shortcut <b>av</b> can be used as in <b>av</b>:<b>my search</"
 "b>\n"
 "</qt>"
 msgstr ""
 "<qt>在此輸入的捷徑可以做為 KDE 中的虛擬網址。例如，<b>av</b> 這個捷徑可以表"
 "示 <b>av</b>:<b>my search</b>\n"
 "</qt>"
 
 #. i18n: ectx: property (toolTip), widget (QLineEdit, leName)
 #. i18n: ectx: property (whatsThis), widget (QLineEdit, leName)
 #: urifilters/ikws/searchproviderdlg_ui.ui:104
 #: urifilters/ikws/searchproviderdlg_ui.ui:107
 #, kde-format
 msgid ""
 "<html><head/><body><p>Enter the human-readable name of the web shortcut here."
 "</p></body></html>"
 msgstr "<html><head/><body><p>輸入易於辨識的網頁捷徑名稱。</p></body></html>"
 
 #. i18n: ectx: property (text), widget (QLabel, lbShortcut)
 #: urifilters/ikws/searchproviderdlg_ui.ui:119
 #, kde-format
 msgid "&Shortcuts:"
 msgstr "捷徑(&S)："
 
 #. i18n: ectx: property (whatsThis), widget (QLabel, lbCharset)
 #: urifilters/ikws/searchproviderdlg_ui.ui:132
 #, kde-format
 msgid "Select the character set that will be used to encode your search query"
 msgstr "選擇您的查詢字串所使用的字元集"
 
 #. i18n: ectx: property (text), widget (QLabel, lbCharset)
 #: urifilters/ikws/searchproviderdlg_ui.ui:135
 #, kde-format
 msgid "&Charset:"
 msgstr "字元集(&C)："
 
 #. i18n: ectx: property (toolTip), widget (QPushButton, pbPaste)
 #: urifilters/ikws/searchproviderdlg_ui.ui:158
 #, kde-format
 msgid "Insert query placeholder"
 msgstr "插入查詢佔位符"
 
 #: urifilters/shorturi/kshorturifilter.cpp:279
 #, kde-format
 msgid "<qt><b>%1</b> does not have a home folder.</qt>"
 msgstr "<qt><b>%1</b> 沒有家目錄。</qt>"
 
 #: urifilters/shorturi/kshorturifilter.cpp:281
 #, kde-format
 msgid "<qt>There is no user called <b>%1</b>.</qt>"
 msgstr "<qt>沒有叫做 <b>%1</b> 的使用者。</qt>"
 
 #: widgets/accessmanager.cpp:217
 #, kde-format
 msgid "Blocked request."
 msgstr "以封鎖的要求。"
 
 #: widgets/accessmanager.cpp:290
 #, kde-format
 msgid "Unknown HTTP verb."
 msgstr "不明的 HTTP 動作。"
 
 #. i18n: ectx: property (text), widget (QLabel, commonNameTag)
 #: widgets/certificateparty.ui:28
 #, kde-format
 msgid "Common name:"
 msgstr "一般名稱:"
 
 #. i18n: ectx: property (text), widget (QLabel, commonName)
 #: widgets/certificateparty.ui:38
 #, kde-format
 msgid "Acme Co."
 msgstr "Acme Co."
 
 #. i18n: ectx: property (text), widget (QLabel, organizationTag)
 #: widgets/certificateparty.ui:48
 #, kde-format
 msgid "Organization:"
 msgstr "組織:"
 
 #. i18n: ectx: property (text), widget (QLabel, organization)
 #: widgets/certificateparty.ui:58
 #, kde-format
 msgid "Acme Sundry Products Company"
 msgstr "Acme Sundry Products Company"
 
 #. i18n: ectx: property (text), widget (QLabel, organizationalUnitTag)
 #: widgets/certificateparty.ui:68
 #, kde-format
 msgid "Organizational unit:"
 msgstr "組織單位:"
 
 #. i18n: ectx: property (text), widget (QLabel, organizationalUnit)
 #: widgets/certificateparty.ui:78
 #, kde-format
 msgid "Fraud Department"
 msgstr "Fraud Department"
 
 #. i18n: ectx: property (text), widget (QLabel, countryTag)
 #: widgets/certificateparty.ui:88
 #, kde-format
 msgid "Country:"
 msgstr "國家:"
 
 #. i18n: ectx: property (text), widget (QLabel, country)
 #: widgets/certificateparty.ui:98
 #, kde-format
 msgid "Canada"
 msgstr "加拿大"
 
 #. i18n: ectx: property (text), widget (QLabel, stateTag)
 #: widgets/certificateparty.ui:108
 #, kde-format
 msgid "State:"
 msgstr "省/州："
 
 #. i18n: ectx: property (text), widget (QLabel, state)
 #: widgets/certificateparty.ui:118
 #, kde-format
 msgid "Quebec"
 msgstr "魁北克"
 
 #. i18n: ectx: property (text), widget (QLabel, cityTag)
 #: widgets/certificateparty.ui:128
 #, kde-format
 msgid "City:"
 msgstr "城市："
 
 #. i18n: ectx: property (text), widget (QLabel, city)
 #: widgets/certificateparty.ui:138
 #, kde-format
 msgid "Lakeridge Meadows"
 msgstr "Lakeridge Meadows"
 
 #. i18n: ectx: property (text), widget (QLabel, label)
 #: widgets/checksumswidget.ui:17
 #, kde-format
 msgid ""
 "Copy and paste a checksum in the field below.<br/>A checksum is usually "
 "provided by the website you downloaded this file from."
 msgstr ""
 "在下面的欄位中複製並貼上總和檢查碼。<br/>檢查碼通常會在您下載該檔案的網頁中提"
 "供。"
 
 #. i18n: MD5, SHA1 and SHA256 are hashing algorithms
 #. i18n: ectx: property (placeholderText), widget (QLineEdit, lineEdit)
 #: widgets/checksumswidget.ui:29
 #, kde-format
 msgid "Expected checksum (MD5, SHA1 or SHA256)..."
 msgstr "預期中的總和檢查碼 (MD5、SHA1 或 SHA256)..."
 
 #. i18n: ectx: property (toolTip), widget (QPushButton, pasteButton)
 #: widgets/checksumswidget.ui:36
 #, kde-format
 msgid "Click to paste the checksum from the clipboard to the input field."
 msgstr "點選以從剪貼簿貼上檢查碼到輸入區。"
 
 #. i18n: MD5 is the hashing algorithm
 #. i18n: ectx: property (text), widget (QLabel, label_2)
 #: widgets/checksumswidget.ui:65
 #, kde-format
 msgid "MD5:"
 msgstr "MD5："
 
 #. i18n: SHA1 is the hashing algorithm
 #. i18n: ectx: property (text), widget (QLabel, label_3)
 #: widgets/checksumswidget.ui:72
 #, kde-format
 msgid "SHA1:"
 msgstr "SHA1："
 
 #. i18n: SHA256 is the hashing algorithm
 #. i18n: ectx: property (text), widget (QLabel, label_4)
 #: widgets/checksumswidget.ui:79
 #, kde-format
 msgid "SHA256:"
 msgstr "SHA256："
 
 #. i18n: ectx: property (text), widget (QPushButton, md5Button)
 #. i18n: ectx: property (text), widget (QPushButton, sha1Button)
 #. i18n: ectx: property (text), widget (QPushButton, sha256Button)
 #: widgets/checksumswidget.ui:88 widgets/checksumswidget.ui:126
 #: widgets/checksumswidget.ui:164 widgets/kpropertiesdialog.cpp:1095
 #, kde-format
 msgid "Calculate"
 msgstr "計算"
 
 #. i18n: ectx: property (toolTip), widget (QPushButton, md5CopyButton)
 #. i18n: ectx: property (toolTip), widget (QPushButton, sha1CopyButton)
 #. i18n: ectx: property (toolTip), widget (QPushButton, sha256CopyButton)
 #: widgets/checksumswidget.ui:108 widgets/checksumswidget.ui:146
 #: widgets/checksumswidget.ui:184
 #, kde-format
 msgid "Click to copy the checksum to the clipboard."
 msgstr "點選以複製檢查碼到剪貼簿中。"
 
 #: widgets/dropjob.cpp:179
 #, kde-format
 msgid "C&ancel"
 msgstr "取消(&A)"
 
 #: widgets/dropjob.cpp:345
 #, kde-format
 msgid "&Move Here"
 msgstr "移動到這裡(&M)"
 
 #: widgets/dropjob.cpp:351
 #, kde-format
 msgid "&Copy Here"
 msgstr "複製到這裡(&C)"
 
 #: widgets/dropjob.cpp:357
 #, kde-format
 msgid "&Link Here"
 msgstr "連結到這裡(&L)"
 
 #: widgets/executablefileopendialog.cpp:33
 #, kde-format
 msgid "What do you wish to do with this executable file?"
 msgstr "您打算怎麼處理此執行檔？"
 
 #: widgets/executablefileopendialog.cpp:39
 #, kde-format
 msgid "&Execute"
 msgstr "執行(&E)"
 
 #: widgets/fileundomanager.cpp:121
 #, kde-format
 msgid "Undo Changes"
 msgstr "復原變更"
 
 #: widgets/fileundomanager.cpp:122
 #, kde-format
 msgid ""
 "Undoing this operation requires root privileges. Do you want to continue?"
 msgstr "復原這次操作需要 root 權限。您想要繼續嗎？"
 
 #: widgets/fileundomanager.cpp:134
 #, kde-format
 msgid "Creating directory"
 msgstr "建立目錄"
 
 #: widgets/fileundomanager.cpp:139
 #, kde-format
 msgid "Moving"
 msgstr "移動中"
 
 #: widgets/fileundomanager.cpp:145
 #, kde-format
 msgid "Deleting"
 msgstr "刪除中"
 
 #: widgets/fileundomanager.cpp:326
 #, kde-format
 msgid "Und&o"
 msgstr "復原(&O)"
 
 #: widgets/fileundomanager.cpp:332
 #, kde-format
 msgid "Und&o: Copy"
 msgstr "復原：複製(&O)"
 
 #: widgets/fileundomanager.cpp:334
 #, kde-format
 msgid "Und&o: Link"
 msgstr "復原：連結(&O)"
 
 #: widgets/fileundomanager.cpp:336
 #, kde-format
 msgid "Und&o: Move"
 msgstr "復原：移動(&O)"
 
 #: widgets/fileundomanager.cpp:338
 #, kde-format
 msgid "Und&o: Rename"
 msgstr "復原：重新命名(&O)"
 
 #: widgets/fileundomanager.cpp:340
 #, kde-format
 msgid "Und&o: Trash"
 msgstr "復原：丟到垃圾桶(&O)"
 
 #: widgets/fileundomanager.cpp:342
 #, kde-format
 msgid "Und&o: Create Folder"
 msgstr "復原：建立資料夾(&O)"
 
 #: widgets/fileundomanager.cpp:344
 #, kde-format
 msgid "Und&o: Create Folder(s)"
 msgstr "復原：建立資料夾(&O)"
 
 #: widgets/fileundomanager.cpp:346
 #, kde-format
 msgid "Und&o: Create File"
 msgstr "復原：建立檔案(&O)"
 
 #: widgets/fileundomanager.cpp:348
 #, kde-format
 msgid "Und&o: Batch Rename"
 msgstr "復原：批次重新命名(&O)"
 
 #: widgets/fileundomanager.cpp:746
 #, kde-format
 msgid ""
 "The file %1 was copied from %2, but since then it has apparently been "
 "modified at %3.\n"
 "Undoing the copy will delete the file, and all modifications will be lost.\n"
 "Are you sure you want to delete %4?"
 msgstr ""
 "檔案 %1 是從 %2 複製而來，但是之後於 %3 被變更過。\n"
 "復原此複製動作會將變更後的檔案刪除，所以所有變更都會遺失。\n"
 "您確定您要刪除 %4 嗎？"
 
 #: widgets/fileundomanager.cpp:749
 #, kde-format
 msgid "Undo File Copy Confirmation"
 msgstr "確認復原檔案複製動作"
 
 #: widgets/jobuidelegate.cpp:234
 #, kde-kuit-format
 msgctxt "@info"
 msgid ""
 "Do you really want to permanently delete this item?<nl/><filename>%1</"
 "filename><nl/><nl/><emphasis strong='true'>This action cannot be undone.</"
 "emphasis>"
 msgstr ""
 "您真的要從垃圾桶中永久刪除這個項目嗎？<nl/><filename>%1</filename><nl/><nl/"
 "><emphasis strong='true'>此動作無法復原。</emphasis>"
 
 #: widgets/jobuidelegate.cpp:235 widgets/jobuidelegate.cpp:244
 #: widgets/jobuidelegate.cpp:254
-#, fuzzy, kde-format
+#, kde-format
 #| msgid "Delete Permanently?"
 msgid "Delete Permanently"
-msgstr "永久刪除？"
+msgstr "永久刪除"
 
 #: widgets/jobuidelegate.cpp:242
 #, kde-kuit-format
 msgctxt "@info"
 msgid ""
 "Do you really want to permanently delete this item?<nl/><nl/><emphasis "
 "strong='true'>This action cannot be undone.</emphasis>"
 msgid_plural ""
 "Do you really want to permanently delete these %1 items?<nl/><nl/><emphasis "
 "strong='true'>This action cannot be undone.</emphasis>"
 msgstr[0] ""
 "您要從垃圾桶中永久刪除 %1 個項目嗎？<nl/><nl/><emphasis strong='true'>此動作"
 "無法復原。</emphasis>"
 
 #: widgets/jobuidelegate.cpp:253
 #, kde-kuit-format
 msgctxt "@info"
 msgid ""
 "Do you want to permanently delete all items from the Trash?<nl/><nl/"
 "><emphasis strong='true'>This action cannot be undone.</emphasis>"
 msgstr ""
 "您要從垃圾桶中永久刪除所有的項目嗎？<nl/><nl/><emphasis strong='true'>此動作"
 "無法復原。</emphasis>"
 
 #: widgets/jobuidelegate.cpp:255
 #, kde-format
 msgctxt "@action:button"
 msgid "Empty Trash"
 msgstr "清空垃圾桶"
 
 #: widgets/jobuidelegate.cpp:265
 #, kde-kuit-format
 msgctxt "@info"
 msgid ""
 "Do you really want to move this item to the Trash?<nl/><filename>%1</"
 "filename>"
 msgstr "您真的要將這個項目移到垃圾桶嗎？<nl/><filename>%1</filename>"
 
 #: widgets/jobuidelegate.cpp:273
-#, fuzzy, kde-format
+#, kde-format
 #| msgid "Do you really want to move this item to the trash?"
 #| msgid_plural "Do you really want to move these %1 items to the trash?"
 msgid "Do you really want to move this item to the Trash?"
 msgid_plural "Do you really want to move these %1 items to the Trash?"
-msgstr[0] "您真的要將這 %1 個項目移到垃圾桶嗎？"
+msgstr[0] "是否將這 %1 個項目移至垃圾桶？"
 
 #: widgets/jobuidelegate.cpp:370
 #, kde-format
 msgid "The peer SSL certificate chain appears to be corrupt."
 msgstr "對等的 SSL 憑證鍊可能損壞了。"
 
 #: widgets/kacleditwidget.cpp:60 widgets/kacleditwidget.cpp:449
 #, kde-format
 msgid "Owner"
 msgstr "擁有者"
 
 #: widgets/kacleditwidget.cpp:61 widgets/kacleditwidget.cpp:454
 #, kde-format
 msgid "Owning Group"
 msgstr "擁有群組"
 
 #: widgets/kacleditwidget.cpp:62 widgets/kacleditwidget.cpp:459
 #: widgets/kpropertiesdialog.cpp:2054
 #, kde-format
 msgid "Others"
 msgstr "其他"
 
 #: widgets/kacleditwidget.cpp:63 widgets/kacleditwidget.cpp:464
 #, kde-format
 msgid "Mask"
 msgstr "遮罩"
 
 #: widgets/kacleditwidget.cpp:64
 #, kde-format
 msgid "Named User"
 msgstr "已命名使用者"
 
 #: widgets/kacleditwidget.cpp:65
 #, kde-format
 msgid "Named Group"
 msgstr "已命名群組"
 
 #: widgets/kacleditwidget.cpp:101
 #, kde-format
 msgid "Edit Entry..."
 msgstr "編輯項目..."
 
 #: widgets/kacleditwidget.cpp:105
 #, kde-format
 msgid "Delete Entry"
 msgstr "刪除項目"
 
 #: widgets/kacleditwidget.cpp:309
 #, kde-format
 msgid " (Default)"
 msgstr " (預設)"
 
 #: widgets/kacleditwidget.cpp:430
 #, kde-format
 msgid "Edit ACL Entry"
 msgstr "編輯存取控制清單項目"
 
 #: widgets/kacleditwidget.cpp:434
 #, kde-format
 msgid "Entry Type"
 msgstr "項目型態"
 
 #: widgets/kacleditwidget.cpp:440
 #, kde-format
 msgid "Default for new files in this folder"
 msgstr "此資料夾新檔案的預設值"
 
 #: widgets/kacleditwidget.cpp:469
 #, kde-format
 msgid "Named user"
 msgstr "已命名使用者"
 
 #: widgets/kacleditwidget.cpp:474
 #, kde-format
 msgid "Named group"
 msgstr "已命名群組"
 
 #: widgets/kacleditwidget.cpp:494
 #, kde-format
 msgid "User: "
 msgstr "使用者："
 
 #: widgets/kacleditwidget.cpp:509
 #, kde-format
 msgid "Group: "
 msgstr "群組："
 
 #: widgets/kacleditwidget.cpp:646
 #, kde-format
 msgid "Type"
 msgstr "類型"
 
 #: widgets/kacleditwidget.cpp:647
 #, kde-format
 msgid "Name"
 msgstr "名稱"
 
 #: widgets/kacleditwidget.cpp:648
 #, kde-format
 msgctxt "read permission"
 msgid "r"
 msgstr "r"
 
 #: widgets/kacleditwidget.cpp:649
 #, kde-format
 msgctxt "write permission"
 msgid "w"
 msgstr "w"
 
 #: widgets/kacleditwidget.cpp:650
 #, kde-format
 msgctxt "execute permission"
 msgid "x"
 msgstr "x"
 
 #: widgets/kacleditwidget.cpp:651
 #, kde-format
 msgid "Effective"
 msgstr "有效"
 
 #: widgets/kbuildsycocaprogressdialog.cpp:41
 #, kde-format
 msgid "Updating System Configuration"
 msgstr "更新系統組態"
 
 #: widgets/kbuildsycocaprogressdialog.cpp:42
 #, kde-format
 msgid "Updating system configuration."
 msgstr "更新系統組態。"
 
 #: widgets/kdesktopfileactions.cpp:80
 #, kde-format
 msgid "The desktop entry file %1 has no Type=... entry."
 msgstr "桌面項目檔案 %1 中沒有 Type=... 項目。"
 
 #: widgets/kdesktopfileactions.cpp:97
 #, kde-format
 msgid ""
 "The desktop entry of type\n"
 "%1\n"
 "is unknown."
 msgstr ""
 "類型 %1 中的桌面\n"
 "項目\n"
 "無法辨識。"
 
 #: widgets/kdesktopfileactions.cpp:110 widgets/kdesktopfileactions.cpp:190
 #: widgets/kdesktopfileactions.cpp:323
 #, kde-format
 msgid ""
 "The desktop entry file\n"
 "%1\n"
 "is of type FSDevice but has no Dev=... entry."
 msgstr ""
 "桌面項目檔案\n"
 "%1\n"
 "為 FSDevice 類型，但沒有 Dev=... 項目。"
 
 #: widgets/kdesktopfileactions.cpp:143
 #, kde-format
 msgid ""
 "The desktop entry file\n"
 "%1\n"
 "is not valid."
 msgstr ""
 "桌面項目檔\n"
 "%1\n"
 "不合法。"
 
 #: widgets/kdesktopfileactions.cpp:156
 #, kde-format
 msgid ""
 "The desktop entry file\n"
 "%1\n"
 "is of type Link but has no URL=... entry."
 msgstr ""
 "桌面項目檔案\n"
 "%1\n"
 "為 Link 類型，但沒有 URL=... 項目。"
 
 #: widgets/kdesktopfileactions.cpp:226
 #, kde-format
 msgid "Mount"
 msgstr "裝載"
 
 #: widgets/kdesktopfileactions.cpp:237
 #, kde-format
 msgid "Eject"
 msgstr "退出"
 
 #: widgets/kdesktopfileactions.cpp:239
 #, kde-format
 msgid "Unmount"
 msgstr "卸載"
 
 #: widgets/kdirmodel.cpp:1124
 #, kde-format
 msgctxt "@title:column"
 msgid "Name"
 msgstr "名稱"
 
 #: widgets/kdirmodel.cpp:1126
 #, kde-format
 msgctxt "@title:column"
 msgid "Size"
 msgstr "大小"
 
 #: widgets/kdirmodel.cpp:1128
 #, kde-format
 msgctxt "@title:column"
 msgid "Date"
 msgstr "日期"
 
 #: widgets/kdirmodel.cpp:1130
 #, kde-format
 msgctxt "@title:column"
 msgid "Permissions"
 msgstr "權限"
 
 #: widgets/kdirmodel.cpp:1132
 #, kde-format
 msgctxt "@title:column"
 msgid "Owner"
 msgstr "擁有者"
 
 #: widgets/kdirmodel.cpp:1134
 #, kde-format
 msgctxt "@title:column"
 msgid "Group"
 msgstr "群組"
 
 #: widgets/kdirmodel.cpp:1136
 #, kde-format
 msgctxt "@title:column"
 msgid "Type"
 msgstr "類型"
 
 #: widgets/kfileitemactions.cpp:429
 #, kde-format
 msgctxt "@title:menu"
 msgid "&Actions"
 msgstr "動作(&A)"
 
 #: widgets/kfileitemactions.cpp:629
 #, kde-format
 msgid "&Open with %1"
 msgstr "用 %1 開啟(&O)"
 
 #: widgets/kfileitemactions.cpp:663
 #, kde-format
 msgctxt "@title:menu"
 msgid "&Open With"
 msgstr "開啟方式(&O)"
 
 #: widgets/kfileitemactions.cpp:681
 #, kde-format
 msgctxt "@action:inmenu Open With"
 msgid "&Other Application..."
 msgstr "其他應用程式(&O)..."
 
 #: widgets/kfileitemactions.cpp:683 widgets/kfileitemactions.cpp:694
 #, kde-format
 msgctxt "@title:menu"
 msgid "&Open With..."
 msgstr "開啟方式(&O)..."
 
 #: widgets/kfileitemactions.cpp:801
 #, kde-format
 msgid "Open &with %1"
 msgstr "用 %1 開啟(&W)"
 
 #: widgets/kfileitemactions.cpp:803
 #, kde-format
 msgctxt "@item:inmenu Open With, %1 is application name"
 msgid "%1"
 msgstr "%1"
 
 #: widgets/kfileitemdelegate.cpp:220
 #, kde-format
 msgctxt "Items in a folder"
 msgid "1 item"
 msgid_plural "%1 items"
 msgstr[0] "%1 個項目"
 
 #: widgets/kfileitemdelegate.cpp:276 widgets/kfileitemdelegate.cpp:280
 #, kde-format
 msgctxt "@info mimetype"
 msgid "Unknown"
 msgstr "未知"
 
 #: widgets/kopenwithdialog.cpp:297
 #, kde-format
 msgid "Known Applications"
 msgstr "已知的應用程式"
 
 #: widgets/kopenwithdialog.cpp:554
 #, kde-format
 msgid "Open With"
 msgstr "開啟用"
 
 #: widgets/kopenwithdialog.cpp:558
 #, kde-format
 msgid ""
 "<qt>Select the program that should be used to open <b>%1</b>. If the program "
 "is not listed, enter the name or click the browse button.</qt>"
 msgstr ""
 "<qt>選取用來開啟 <b>%1</b> 的程式。如果程式不在清單中，請輸入程式名稱或按一下"
 "瀏覽按鈕。</qt>"
 
 #: widgets/kopenwithdialog.cpp:564
 #, kde-format
 msgid "Choose the name of the program with which to open the selected files."
 msgstr "選擇用來開啟選定檔案的程式名稱。"
 
 #: widgets/kopenwithdialog.cpp:580
 #, kde-format
 msgid "<qt>Select the program you want to use to open the file<br/>%1</qt>"
 msgstr "<qt>選取您想要用於開啟檔案的程式<br/>%1</qt>"
 
 #: widgets/kopenwithdialog.cpp:582
 #, kde-format
 msgid "<qt>Select the program you want to use to open the file.</qt>"
 msgid_plural ""
 "<qt>Select the program you want to use to open the %1 files.</qt>"
 msgstr[0] "<qt>選取您想要用於開啟檔案 %1 的程式。</qt>"
 
 #: widgets/kopenwithdialog.cpp:586 widgets/kopenwithdialog.cpp:615
 #, kde-format
 msgid "Choose Application"
 msgstr "選擇應用程式"
 
 #: widgets/kopenwithdialog.cpp:597
 #, kde-format
 msgid "Choose Application for %1"
 msgstr "為 %1 選擇應用程式"
 
 #: widgets/kopenwithdialog.cpp:598
 #, kde-format
 msgid ""
 "<qt>Select the program for the file type: <b>%1</b>. If the program is not "
 "listed, enter the name or click the browse button.</qt>"
 msgstr ""
 "<qt>選取開啟檔案類型 <b>%1</b> 使用的程式。如果要使用的程式不在清單中，請輸入"
 "程式名稱或按一下瀏覽按鈕。</qt>"
 
 #: widgets/kopenwithdialog.cpp:616
 #, kde-format
 msgid ""
 "<qt>Select a program. If the program is not listed, enter the name or click "
 "the browse button.</qt>"
 msgstr ""
 "<qt>請選擇程式。如果所需程式不在清單中，請輸入程式名稱或按一下[瀏覽]按鈕。</"
 "qt>"
 
 #: widgets/kopenwithdialog.cpp:656
 #, kde-format
 msgid ""
 "Type to filter the applications below, or specify the name of a command.\n"
 "Press down arrow to navigate the results."
 msgstr ""
 "輸入以過濾以在下方過濾應用程式，或是指定指令名稱。\n"
 "按方向鍵下以查看結果。"
 
 #: widgets/kopenwithdialog.cpp:679
 #, kde-format
 msgid ""
 "Following the command, you can have several place holders which will be "
 "replaced with the actual values when the actual program is run:\n"
 "%f - a single file name\n"
 "%F - a list of files; use for applications that can open several local files "
 "at once\n"
 "%u - a single URL\n"
 "%U - a list of URLs\n"
 "%d - the directory of the file to open\n"
 "%D - a list of directories\n"
 "%i - the icon\n"
 "%m - the mini-icon\n"
 "%c - the comment"
 msgstr ""
 "下列指令，你需要在實際程式執行時換上真實的數值：\n"
 "%f - 單一的檔案名稱\n"
 "%F - 檔案的清單；用在可以一次開啟多個本地檔案的應用程式\n"
 "%u - 單一的網址\n"
 "%U - 網址的清單\n"
 "%d - 要開啟的檔案的目錄\n"
 "%D - 目錄的清單\n"
 "%i - 圖示\n"
 "%m - 小型圖示\n"
 "%c - 註解"
 
 #: widgets/kopenwithdialog.cpp:721
 #, kde-format
 msgid ""
 "&Remember application association for all files of type\n"
 "\"%1\" (%2)"
 msgstr ""
 "記住所有檔案類型為「%1」 (%2)應用程式\n"
 "關聯(&R)"
 
 #: widgets/kopenwithdialog.cpp:730
 #, kde-format
 msgid "Terminal options"
 msgstr "終端機選項"
 
 #: widgets/kopenwithdialog.cpp:735
 #, kde-format
 msgid "Run in &terminal"
 msgstr "於終端機執行(&T)"
 
 #: widgets/kopenwithdialog.cpp:753
 #, kde-format
 msgid "&Do not close when command exits"
 msgstr "當指令存在時不要關閉(&D)"
 
 #: widgets/kopenwithdialog.cpp:937
 #, kde-format
 msgid ""
 "Could not extract executable name from '%1', please type a valid program "
 "name."
 msgstr "無法從 %1 解開執行檔名撐，請輸入合法的程式名稱"
 
 #: widgets/kopenwithdialog.cpp:987
 #, kde-format
 msgid "'%1' not found, please type a valid program name."
 msgstr "找不到 %1，請輸入合法的程式名稱"
 
 #. i18n: ectx: property (title), widget (QGroupBox, buttonGroup2)
 #: widgets/kpropertiesdesktopadvbase.ui:29
 #, kde-format
 msgctxt ""
 "@title:group Title of a group that lets the user choose options about the "
 "terminal when launching a program"
 msgid "Terminal"
 msgstr "終端"
 
 #. i18n: ectx: property (whatsThis), widget (QCheckBox, terminalCheck)
 #: widgets/kpropertiesdesktopadvbase.ui:51
 #, kde-format
 msgid ""
 "Check this option if the application you want to run is a text mode "
 "application or if you want the information that is provided by the terminal "
 "emulator window."
 msgstr ""
 "如果你想要執行的應用程式是文字模式應用程式或者您所要的資訊是由終端機模擬視窗"
 "提供的，請核取這個選項。"
 
 #. i18n: ectx: property (text), widget (QCheckBox, terminalCheck)
 #: widgets/kpropertiesdesktopadvbase.ui:54
 #, kde-format
 msgid "Run in terminal"
 msgstr "在終端機執行"
 
 #. i18n: ectx: property (text), widget (QLabel, terminalEditLabel)
 #: widgets/kpropertiesdesktopadvbase.ui:61
 #, kde-format
 msgid "Terminal options:"
 msgstr "終端機選項："
 
 #. i18n: ectx: property (whatsThis), widget (QCheckBox, terminalCloseCheck)
 #: widgets/kpropertiesdesktopadvbase.ui:71
 #, kde-format
 msgid ""
 "Check this option if the text mode application offers relevant information "
 "on exit. Keeping the terminal emulator open allows you to retrieve this "
 "information."
 msgstr ""
 "如果文字模式應用程式在結束時提供相關資訊，請核取這個選項。保持終端機模擬視窗"
 "開啟以便您取得這個資訊。"
 
 #. i18n: ectx: property (text), widget (QCheckBox, terminalCloseCheck)
 #: widgets/kpropertiesdesktopadvbase.ui:74
 #, kde-format
 msgid "Do not close when command exits"
 msgstr "當指令存在時不要關閉"
 
 #. i18n: ectx: property (title), widget (QGroupBox, buttonGroup2_2)
 #: widgets/kpropertiesdesktopadvbase.ui:87
 #, kde-format
 msgctxt ""
 "@title:group Title of a group that lets the user choose which user to use "
 "when launching a program"
 msgid "User"
 msgstr "使用者"
 
 #. i18n: ectx: property (whatsThis), widget (QCheckBox, suidCheck)
 #: widgets/kpropertiesdesktopadvbase.ui:93
 #, kde-format
 msgid ""
 "Check this option if you want to run this application with a different user "
 "id. Every process has a different user id associated with it. This id code "
 "determines file access and other permissions. The password of the user is "
 "required to use this option."
 msgstr ""
 "如果你想要以不同的使用者 id 來執行這個應用程式，請核取這個選項。每個程序都跟"
 "不同的使用者 id 相關聯。這個 id 代碼決定了檔案存取與其他的權限。使用這個選項"
 "需要該使用者的密碼。"
 
 #. i18n: ectx: property (text), widget (QCheckBox, suidCheck)
 #: widgets/kpropertiesdesktopadvbase.ui:96
 #, kde-format
 msgid "Run as a different user"
 msgstr "以不同使用者身份執行"
 
 #. i18n: ectx: property (whatsThis), widget (QLabel, suidEditLabel)
 #: widgets/kpropertiesdesktopadvbase.ui:119
 #, kde-format
 msgid "Enter the user name you want to run the application as."
 msgstr "輸入你想要在這個應用程式使用的使用者名稱。"
 
 #. i18n: ectx: property (text), widget (QLabel, suidEditLabel)
 #: widgets/kpropertiesdesktopadvbase.ui:122
 #, kde-format
 msgid "Username:"
 msgstr "使用者名稱:"
 
 #. i18n: ectx: property (whatsThis), widget (KLineEdit, suidEdit)
 #: widgets/kpropertiesdesktopadvbase.ui:132
 #, kde-format
 msgid "Enter the user name you want to run the application as here."
 msgstr "在這裡輸入你想要在這個應用程式使用的使用者名稱。"
 
 #. i18n: ectx: property (title), widget (QGroupBox, discreteGpuGroupBox)
 #: widgets/kpropertiesdesktopadvbase.ui:142
 #, kde-format
 msgid "Discrete GPU"
 msgstr "獨立顯示卡"
 
 #. i18n: ectx: property (text), widget (QCheckBox, discreteGpuCheck)
 #: widgets/kpropertiesdesktopadvbase.ui:148
 #, kde-format
 msgid "Run using dedicated graphics card"
 msgstr "使用專用的顯示卡執行"
 
 #. i18n: ectx: property (title), widget (QGroupBox, buttonGroup4)
 #: widgets/kpropertiesdesktopadvbase.ui:158
 #, kde-format
 msgctxt ""
 "@title:group Title of a group that lets the user choose options regarding "
 "program startup"
 msgid "Startup"
 msgstr "啟動"
 
 #. i18n: ectx: property (whatsThis), widget (QCheckBox, startupInfoCheck)
 #: widgets/kpropertiesdesktopadvbase.ui:164
 #, kde-format
 msgid ""
 "Check this option if you want to make clear that your application has "
 "started. This visual feedback may appear as a busy cursor or in the taskbar."
 msgstr ""
 "如果你想要清楚您的應用程式是否已啟動，請核取這個選項。這個虛擬回饋可能顯示為"
 "忙碌的游標或者顯示在工作列中。"
 
 #. i18n: ectx: property (text), widget (QCheckBox, startupInfoCheck)
 #: widgets/kpropertiesdesktopadvbase.ui:167
 #, kde-format
 msgid "Enable launch feedback"
 msgstr "啟用執行回饋"
 
 #. i18n: ectx: property (text), item, widget (KComboBox, dbusCombo)
 #: widgets/kpropertiesdesktopadvbase.ui:191
 #, kde-format
 msgid "None"
 msgstr "無"
 
 #. i18n: ectx: property (text), item, widget (KComboBox, dbusCombo)
 #: widgets/kpropertiesdesktopadvbase.ui:196
 #, kde-format
 msgid "Multiple Instances"
 msgstr "多重實體"
 
 #. i18n: ectx: property (text), item, widget (KComboBox, dbusCombo)
 #: widgets/kpropertiesdesktopadvbase.ui:201
 #, kde-format
 msgid "Single Instance"
 msgstr "單一實體"
 
 #. i18n: ectx: property (text), item, widget (KComboBox, dbusCombo)
 #: widgets/kpropertiesdesktopadvbase.ui:206
 #, kde-format
 msgid "Run Until Finished"
 msgstr "執行單元結束"
 
 #. i18n: ectx: property (text), widget (QLabel, textLabel12)
 #: widgets/kpropertiesdesktopadvbase.ui:214
 #, kde-format
 msgid "D-Bus registration:"
 msgstr "D-BUS 註冊："
 
 #. i18n: ectx: property (whatsThis), widget (QLabel, nameLabel)
 #. i18n: ectx: property (whatsThis), widget (KLineEdit, nameEdit)
 #: widgets/kpropertiesdesktopbase.ui:14 widgets/kpropertiesdesktopbase.ui:27
 #, kde-format
 msgid ""
 "Type the name you want to give to this application here. This application "
 "will appear under this name in the applications menu and in the panel."
 msgstr ""
 "在這裡輸入您想要給這個應用程式的名稱。這個應用程式在應用程式選單以及面板中會"
 "以此名稱出現。"
 
 #. i18n: ectx: property (whatsThis), widget (QLabel, textLabel2)
 #. i18n: ectx: property (whatsThis), widget (KLineEdit, genNameEdit)
 #: widgets/kpropertiesdesktopbase.ui:34 widgets/kpropertiesdesktopbase.ui:47
 #, kde-format
 msgid ""
 "Type the description of this application, based on its use, here. Examples: "
 "a dial up application (KPPP) would be \"Dial up tool\"."
 msgstr ""
 "在這裡輸入這個應用程式的描述，可根據它的用途。例如：一個撥號應用程式 (KPPP) "
 "應該是「撥號工具」。"
 
 #. i18n: ectx: property (text), widget (QLabel, textLabel2)
 #: widgets/kpropertiesdesktopbase.ui:37
 #, kde-format
 msgid "&Description:"
 msgstr "描述(&D)："
 
 #. i18n: ectx: property (whatsThis), widget (QLabel, textLabel3)
 #. i18n: ectx: property (whatsThis), widget (KLineEdit, commentEdit)
 #: widgets/kpropertiesdesktopbase.ui:54 widgets/kpropertiesdesktopbase.ui:67
 #, kde-format
 msgid "Type any comment you think is useful here."
 msgstr "在這裡輸入任何您認為有幫助的註解。"
 
 #. i18n: ectx: property (text), widget (QLabel, textLabel3)
 #: widgets/kpropertiesdesktopbase.ui:57
 #, kde-format
 msgid "Comm&ent:"
 msgstr "備註(&E):"
 
 #. i18n: ectx: property (whatsThis), widget (QLabel, textLabel4)
 #. i18n: ectx: property (whatsThis), widget (KLineEdit, commandEdit)
 #: widgets/kpropertiesdesktopbase.ui:85 widgets/kpropertiesdesktopbase.ui:111
 #, no-c-format, kde-format
 msgid ""
 "Type the command to start this application here.\n"
 "\n"
 "Following the command, you can have several place holders which will be "
 "replaced with the actual values when the actual program is run:\n"
 "%f - a single file name\n"
 "%F - a list of files; use for applications that can open several local files "
 "at once\n"
 "%u - a single URL\n"
 "%U - a list of URLs\n"
 "%d - the directory of the file to open\n"
 "%D - a list of directories\n"
 "%i - the icon\n"
 "%m - the mini-icon\n"
 "%c - the caption"
 msgstr ""
 "在這裡輸入啟動這個應用程式的指令。\n"
 "\n"
 "下列指令，你需要在實際程式執行時換上真實的數值：\n"
 "%f - 單一的檔案名稱\n"
 "%F - 檔案的清單；用在可以一次開啟多個本地檔案的應用程式\n"
 "%u - 單一的網址\n"
 "%U - 網址的清單\n"
 "%d - 要開啟的檔案的目錄\n"
 "%D - 目錄的清單\n"
 "%i - 圖示\n"
 "%m - 小型圖示\n"
 "%c - 說明"
 
 #. i18n: ectx: property (text), widget (QLabel, textLabel4)
 #: widgets/kpropertiesdesktopbase.ui:88
 #, kde-format
 msgid "Co&mmand:"
 msgstr "命令(&M):"
 
 #. i18n: ectx: property (whatsThis), widget (QPushButton, browseButton)
 #: widgets/kpropertiesdesktopbase.ui:118
 #, kde-format
 msgid ""
 "Click here to browse your file system in order to find the desired "
 "executable."
 msgstr "按這裡瀏覽您的檔案系統以找出想要的可執行檔。"
 
 #. i18n: ectx: property (text), widget (QPushButton, browseButton)
 #: widgets/kpropertiesdesktopbase.ui:121
 #, kde-format
 msgid "&Browse..."
 msgstr "瀏覽(&B)..."
 
 #. i18n: ectx: property (whatsThis), widget (QLabel, textLabel5)
 #. i18n: ectx: property (whatsThis), widget (KUrlRequester, pathEdit)
 #: widgets/kpropertiesdesktopbase.ui:130 widgets/kpropertiesdesktopbase.ui:143
 #, kde-format
 msgid "Sets the working directory for your application."
 msgstr "設定您的應用程式的工作目錄。"
 
 #. i18n: ectx: property (text), widget (QLabel, textLabel5)
 #: widgets/kpropertiesdesktopbase.ui:133
 #, kde-format
 msgid "&Work path:"
 msgstr "工作路徑(&W):"
 
 #. i18n: ectx: property (whatsThis), widget (QLabel, textLabel7)
 #. i18n: ectx: property (whatsThis), widget (QTreeWidget, filetypeList)
 #: widgets/kpropertiesdesktopbase.ui:157 widgets/kpropertiesdesktopbase.ui:178
 #, kde-format
 msgid ""
 "<qt><p>This list should show the types of file that your application can "
 "handle. This list is organized by <u>mimetypes</u>.</p>\n"
 "<p>MIME, Multipurpose Internet (e)Mail Extension, is a standard protocol for "
 "identifying the type of data based on filename extensions and correspondent "
 "<u>mimetypes</u>. Example: the \"bmp\" part that comes after the dot in "
 "flower.bmp indicates that it is a specific kind of image, <u>image/x-bmp</"
 "u>. To know which application should open each type of file, the system "
 "should be informed about the abilities of each application to handle these "
 "extensions and mimetypes.</p>\n"
 "<p>If you want to associate this application with one or more mimetypes that "
 "are not in this list, click on the button <b>Add</b> below. If there are one "
 "or more filetypes that this application cannot handle, you may want to "
 "remove them from the list clicking on the button <b>Remove</b> below.</p></"
 "qt>"
 msgstr ""
 "<qt><p>這個清單應該顯示您的應用程式可以處理的檔案類型。這個列表是依照 "
 "<u>mime 類型</u> 排列的。</p>\n"
 "<p>MIME，多用途網路郵件延伸功能，是一個以延伸檔名來辨識資料類型與對應的 "
 "<u>mime 類型</u> 的標準協定。 例如：在 flower.bmp 句點後面的「bmp」部份表示他"
 "是一種特定種類的圖片， <u>image/x-bmp</u>。要了解哪一個應用程式用來開啟哪種類"
 "型的檔案，系統需要了解每個應用程式可以處理這些延伸檔名以及 mime 類型的能力。"
 "</p>\n"
 "<p>如果你想要把這個應用程式關聯到一或多個列表中沒有的 mime 類型，請按下面的按"
 "鈕 <b>加入</b>。如果有一或多個此應用程式無法處理的檔案類型，您可能會想要按下"
 "面的 <b>移除</b> 按鈕來把它們從列表中移除。</p></qt>"
 
 #. i18n: ectx: property (text), widget (QLabel, textLabel7)
 #: widgets/kpropertiesdesktopbase.ui:160
 #, kde-format
 msgid "&Supported file types:"
 msgstr "支援的檔案類型(&S):"
 
 #. i18n: ectx: property (text), widget (QTreeWidget, filetypeList)
 #: widgets/kpropertiesdesktopbase.ui:191
 #, kde-format
 msgid "Mimetype"
 msgstr "Mime 類型"
 
 #. i18n: ectx: property (text), widget (QTreeWidget, filetypeList)
 #: widgets/kpropertiesdesktopbase.ui:196
 #, kde-format
 msgid "Description"
 msgstr "描述"
 
 #. i18n: ectx: property (whatsThis), widget (QPushButton, addFiletypeButton)
 #: widgets/kpropertiesdesktopbase.ui:206
 #, kde-format
 msgid ""
 "Click on this button if you want to add a type of file (mimetype) that your "
 "application can handle."
-msgstr ""
-"如果你想要加入您的應用程式可以處理的檔案類型（mime 類型），請按這個按鈕。"
+msgstr "如果你想要加入您的應用程式可以處理的檔案類型（mime 類型），請按這個按鈕。"
 
 #. i18n: ectx: property (text), widget (QPushButton, addFiletypeButton)
 #: widgets/kpropertiesdesktopbase.ui:209
 #, kde-format
 msgid "Add..."
 msgstr "加入..."
 
 #. i18n: ectx: property (whatsThis), widget (QPushButton, delFiletypeButton)
 #: widgets/kpropertiesdesktopbase.ui:216
 #, kde-format
 msgid ""
 "If you want to remove a type of file (mimetype) that your application cannot "
 "handle, select the mimetype in the list above and click on this button."
 msgstr ""
 "如果你想要移除您的應用程式不能處理的檔案類型（mime 類型），請在上面列表中選"
 "擇 mime 類型並且按這個按鈕。"
 
 #. i18n: ectx: property (text), widget (QPushButton, delFiletypeButton)
 #: widgets/kpropertiesdesktopbase.ui:219
 #, kde-format
 msgid "Remove"
 msgstr "移除"
 
 #. i18n: ectx: property (whatsThis), widget (QPushButton, advancedButton)
 #: widgets/kpropertiesdesktopbase.ui:242
 #, kde-format
 msgid ""
 "Click here to modify the way this application will run, launch feedback, D-"
 "Bus options or to run it as a different user."
 msgstr ""
 "按這裡修改執行這個應用程式的方式，啟動回饋、D-BUS 選項或者以不同的使用者執行"
 "它。"
 
 #. i18n: ectx: property (text), widget (QPushButton, advancedButton)
 #: widgets/kpropertiesdesktopbase.ui:245
 #, kde-format
 msgid "Ad&vanced Options"
 msgstr "進階的選項(&V)"
 
 #: widgets/kpropertiesdialog.cpp:218 widgets/kpropertiesdialog.cpp:233
 #: widgets/kpropertiesdialog.cpp:245 widgets/kpropertiesdialog.cpp:261
 #: widgets/kpropertiesdialog.cpp:281 widgets/kpropertiesdialog.cpp:306
 #, kde-format
 msgid "Properties for %1"
 msgstr "%1 的內容"
 
 #: widgets/kpropertiesdialog.cpp:243 widgets/kpropertiesdialog.cpp:279
 #, kde-format
 msgid "Properties for 1 item"
 msgid_plural "Properties for %1 Selected Items"
 msgstr[0] "%1 個已選取項目的屬性"
 
 #: widgets/kpropertiesdialog.cpp:847
 #, kde-format
 msgctxt "@title:tab File properties"
 msgid "&General"
 msgstr "一般(&G)"
 
 #: widgets/kpropertiesdialog.cpp:1022
 #, kde-format
 msgid "Type:"
 msgstr "類型："
 
 #: widgets/kpropertiesdialog.cpp:1042
 #, kde-format
 msgid "Create New File Type"
 msgstr "增加新的檔案類別"
 
 #: widgets/kpropertiesdialog.cpp:1044
 #, kde-format
 msgid "File Type Options"
 msgstr "檔案型態選項"
 
 #: widgets/kpropertiesdialog.cpp:1055
 #, kde-format
 msgid "Contents:"
 msgstr "內容："
 
 #: widgets/kpropertiesdialog.cpp:1063 widgets/kurlrequesterdialog.cpp:55
 #, kde-format
 msgid "Location:"
 msgstr "位置："
 
 #: widgets/kpropertiesdialog.cpp:1096
 #, kde-format
 msgid "Stop"
 msgstr "停止"
 
 #: widgets/kpropertiesdialog.cpp:1105 widgets/kpropertiesdialog.cpp:1326
 #, kde-format
 msgid "Refresh"
 msgstr "更新"
 
 #: widgets/kpropertiesdialog.cpp:1113
 #, kde-format
 msgid "Points to:"
 msgstr "指向："
 
 #: widgets/kpropertiesdialog.cpp:1125
 #, kde-format
 msgid "Created:"
 msgstr "建立時間："
 
 #: widgets/kpropertiesdialog.cpp:1134
 #, kde-format
 msgid "Modified:"
 msgstr "修改時間："
 
 #: widgets/kpropertiesdialog.cpp:1144
 #, kde-format
 msgid "Accessed:"
 msgstr "存取時間："
 
 #: widgets/kpropertiesdialog.cpp:1161
 #, kde-format
 msgid "File System:"
 msgstr "檔案系統："
 
 #: widgets/kpropertiesdialog.cpp:1170
 #, kde-format
 msgid "Mounted on:"
 msgstr "掛載點:"
 
 #: widgets/kpropertiesdialog.cpp:1177
 #, kde-format
 msgid "Mounted from:"
 msgstr "掛載於："
 
 #: widgets/kpropertiesdialog.cpp:1186 widgets/kpropertiesdialog.cpp:3249
 #, kde-format
 msgid "Device usage:"
 msgstr "裝置用法："
 
 #: widgets/kpropertiesdialog.cpp:1190 widgets/kpropertiesdialog.cpp:1292
 #, kde-format
 msgctxt "@info:status"
 msgid "Unknown size"
 msgstr "未知的大小"
 
 #: widgets/kpropertiesdialog.cpp:1285 widgets/kpropertiesdialog.cpp:3381
 #, kde-format
 msgctxt "Available space out of total partition size (percent used)"
 msgid "%1 free of %2 (%3% used)"
 msgstr "剩餘 %1，共 %2 (%3% 已使用)"
 
 #: widgets/kpropertiesdialog.cpp:1303
 #, kde-format
 msgid ""
 "Calculating... %1 (%2)\n"
 "%3, %4"
 msgstr ""
 "計算中... %1 (%2)\n"
 "%3, %4"
 
 #: widgets/kpropertiesdialog.cpp:1306 widgets/kpropertiesdialog.cpp:1321
 #, kde-format
 msgid "1 file"
 msgid_plural "%1 files"
 msgstr[0] "%1 個檔案"
 
 #: widgets/kpropertiesdialog.cpp:1307 widgets/kpropertiesdialog.cpp:1322
 #, kde-format
 msgid "1 sub-folder"
 msgid_plural "%1 sub-folders"
 msgstr[0] "%1 個子資料夾"
 
 #: widgets/kpropertiesdialog.cpp:1335
 #, kde-format
 msgid "Calculating..."
 msgstr "計算中..."
 
 #: widgets/kpropertiesdialog.cpp:1360
 #, kde-format
 msgid "At least %1"
 msgstr "至少 %1"
 
 #: widgets/kpropertiesdialog.cpp:1398
 #, kde-format
 msgid "The new file name is empty."
 msgstr "新的檔案名稱是空的。"
 
 #: widgets/kpropertiesdialog.cpp:1581 widgets/kpropertiesdialog.cpp:3125
 #: widgets/kpropertiesdialog.cpp:3426 widgets/kpropertiesdialog.cpp:3702
 #, kde-format
 msgid ""
 "<qt>Could not save properties. You do not have sufficient access to write to "
 "<b>%1</b>.</qt>"
 msgstr "<qt>無法儲存內容。您沒有足夠的存取權來寫入 <b>%1</b>。</qt>"
 
 #: widgets/kpropertiesdialog.cpp:1657 widgets/kpropertiesdialog.cpp:1663
 #: widgets/kpropertiesdialog.cpp:1670
 #, kde-format
 msgid "No Access"
 msgstr "無法存取"
 
 #: widgets/kpropertiesdialog.cpp:1658
 #, kde-format
 msgid "Can Only View"
 msgstr "只能檢視"
 
 #: widgets/kpropertiesdialog.cpp:1659
 #, kde-format
 msgid "Can View & Modify"
 msgstr "可以檢視與修改"
 
 #: widgets/kpropertiesdialog.cpp:1664
 #, kde-format
 msgid "Can Only View Content"
 msgstr "只能檢視內容"
 
 #: widgets/kpropertiesdialog.cpp:1665
 #, kde-format
 msgid "Can View & Modify Content"
 msgstr "可以檢視 & 修改內容"
 
 #: widgets/kpropertiesdialog.cpp:1671
 #, kde-format
 msgid "Can Only View/Read Content"
 msgstr "只能檢視 / 讀取內容"
 
 #: widgets/kpropertiesdialog.cpp:1672
 #, kde-format
 msgid "Can View/Read & Modify/Write"
 msgstr "可以檢視/讀取 & 修改/寫入"
 
 #: widgets/kpropertiesdialog.cpp:1766
 #, kde-format
 msgid "&Permissions"
 msgstr "權限(&P)"
 
 #: widgets/kpropertiesdialog.cpp:1778 widgets/kpropertiesdialog.cpp:1987
 #, kde-format
 msgid "Access Permissions"
 msgstr "存取權限"
 
 #: widgets/kpropertiesdialog.cpp:1786
 #, kde-format
 msgid "This file is a link and does not have permissions."
 msgid_plural "All files are links and do not have permissions."
 msgstr[0] "所有的檔案都是連結而沒有權限。"
 
 #: widgets/kpropertiesdialog.cpp:1790
 #, kde-format
 msgid "Only the owner can change permissions."
 msgstr "只有擁有者可以變更權限。"
 
 #: widgets/kpropertiesdialog.cpp:1794
 #, kde-format
 msgid "O&wner:"
 msgstr "擁有者(&W):"
 
 #: widgets/kpropertiesdialog.cpp:1801
 #, kde-format
 msgid "Specifies the actions that the owner is allowed to do."
 msgstr "指定擁有者被允許進行的動作。"
 
 #: widgets/kpropertiesdialog.cpp:1803
 #, kde-format
 msgid "Gro&up:"
 msgstr "群組(&U):"
 
 #: widgets/kpropertiesdialog.cpp:1810
 #, kde-format
 msgid "Specifies the actions that the members of the group are allowed to do."
 msgstr "指定群組的成員被允許進行的動作。"
 
 #: widgets/kpropertiesdialog.cpp:1812
 #, kde-format
 msgid "O&thers:"
 msgstr "其他(&T):"
 
 #: widgets/kpropertiesdialog.cpp:1819
 #, kde-format
 msgid ""
 "Specifies the actions that all users, who are neither owner nor in the "
 "group, are allowed to do."
 msgstr "指定所有既非擁有者也不在群組中的使用者被允許進行的動作。"
 
 #: widgets/kpropertiesdialog.cpp:1824
 #, kde-format
 msgid "Only own&er can rename and delete folder content"
 msgstr "只有擁有者可以重新命名與刪除資料夾內容(&E)"
 
 #: widgets/kpropertiesdialog.cpp:1825
 #, kde-format
 msgid "Is &executable"
 msgstr "是可執行檔(&E)"
 
 #: widgets/kpropertiesdialog.cpp:1829
 #, kde-format
 msgid ""
 "Enable this option to allow only the folder's owner to delete or rename the "
 "contained files and folders. Other users can only add new files, which "
 "requires the 'Modify Content' permission."
 msgstr ""
 "啟用此選項將指允許資料夾的擁有者可以刪除或重新命名包含的檔案與資料夾。其他的"
 "使用者只能加入新的檔案，但必須具有「編輯內容」的權限。"
 
 #: widgets/kpropertiesdialog.cpp:1833
 #, kde-format
 msgid ""
 "Enable this option to mark the file as executable. This only makes sense for "
 "programs and scripts. It is required when you want to execute them."
 msgstr ""
 "啟用此選項會將檔案標示為可執行。這只對程式與命令稿有意義。當您要執行它們的時"
 "候，這是必須的。"
 
 #: widgets/kpropertiesdialog.cpp:1840
 #, kde-format
 msgid "A&dvanced Permissions"
 msgstr "進階的權限(&D)"
 
 #: widgets/kpropertiesdialog.cpp:1849
 #, kde-format
 msgid "Ownership"
 msgstr "擁有權"
 
 #: widgets/kpropertiesdialog.cpp:1856
 #, kde-format
 msgid "User:"
 msgstr "使用者："
 
 #: widgets/kpropertiesdialog.cpp:1899
 #, kde-format
 msgid "Group:"
 msgstr "群組："
 
 #: widgets/kpropertiesdialog.cpp:1936
 #, kde-format
 msgid "Apply changes to all subfolders and their contents"
 msgstr "套用改變到所有的子資料夾和它們的內容"
 
 #: widgets/kpropertiesdialog.cpp:1978
 #, kde-format
 msgid "Advanced Permissions"
 msgstr "進階的權限"
 
 #: widgets/kpropertiesdialog.cpp:1995
 #, kde-format
 msgid "Class"
 msgstr "類別"
 
 #: widgets/kpropertiesdialog.cpp:2002
 #, kde-format
 msgid ""
 "Show\n"
 "Entries"
 msgstr ""
 "顯示\n"
 "項目"
 
 #: widgets/kpropertiesdialog.cpp:2003
 #, kde-format
 msgid "This flag allows viewing the content of the folder."
 msgstr "這個旗標允許檢視此資料夾的內容。"
 
 #: widgets/kpropertiesdialog.cpp:2005
 #, kde-format
 msgid "Read"
 msgstr "讀取"
 
 #: widgets/kpropertiesdialog.cpp:2006
 #, kde-format
 msgid "The Read flag allows viewing the content of the file."
 msgstr "讀取旗標允許檢視這個檔案的內容。"
 
 #: widgets/kpropertiesdialog.cpp:2012
 #, kde-format
 msgid ""
 "Write\n"
 "Entries"
 msgstr ""
 "寫入\n"
 "項目"
 
 #: widgets/kpropertiesdialog.cpp:2013
 #, kde-format
 msgid ""
 "This flag allows adding, renaming and deleting of files. Note that deleting "
 "and renaming can be limited using the Sticky flag."
 msgstr ""
 "這個旗標允許加入、重新命名與刪除檔案。注意刪除與重新命名可以使用相黏旗標來限"
 "制。"
 
 #: widgets/kpropertiesdialog.cpp:2016
 #, kde-format
 msgid "Write"
 msgstr "寫入"
 
 #: widgets/kpropertiesdialog.cpp:2017
 #, kde-format
 msgid "The Write flag allows modifying the content of the file."
 msgstr "寫入旗標允許修改這個檔案的內容。"
 
 #: widgets/kpropertiesdialog.cpp:2023
 #, kde-format
 msgctxt "Enter folder"
 msgid "Enter"
 msgstr "進入"
 
 #: widgets/kpropertiesdialog.cpp:2024
 #, kde-format
 msgid "Enable this flag to allow entering the folder."
 msgstr "啟用這個旗標已允許進入此資料夾。"
 
 #: widgets/kpropertiesdialog.cpp:2026
 #, kde-format
 msgid "Exec"
 msgstr "執行"
 
 #: widgets/kpropertiesdialog.cpp:2027
 #, kde-format
 msgid "Enable this flag to allow executing the file as a program."
 msgstr "啟用這個旗標將允許這檔案像程式一樣執行。"
 
 #: widgets/kpropertiesdialog.cpp:2035
 #, kde-format
 msgid "Special"
 msgstr "特殊屬性"
 
 #: widgets/kpropertiesdialog.cpp:2039
 #, kde-format
 msgid ""
 "Special flag. Valid for the whole folder, the exact meaning of the flag can "
 "be seen in the right hand column."
-msgstr ""
-"特殊的旗標。對整個資料夾都有效，這個旗標精確的意思可以在右手邊的欄位看到。"
+msgstr "特殊的旗標。對整個資料夾都有效，這個旗標精確的意思可以在右手邊的欄位看到。"
 
 #: widgets/kpropertiesdialog.cpp:2042
 #, kde-format
 msgid ""
 "Special flag. The exact meaning of the flag can be seen in the right hand "
 "column."
 msgstr "特殊的旗標。這個旗標精確的意思可以在右手邊的欄位看到。"
 
 #: widgets/kpropertiesdialog.cpp:2046
 #, kde-format
 msgid "User"
 msgstr "使用者"
 
 #: widgets/kpropertiesdialog.cpp:2050
 #, kde-format
 msgid "Group"
 msgstr "群組"
 
 #: widgets/kpropertiesdialog.cpp:2060
 #, kde-format
 msgid ""
 "If this flag is set, the owner of this folder will be the owner of all new "
 "files."
 msgstr "如果設定這個旗標，此資料夾的擁有者將會成為所有新檔案的擁有者。"
 
 #: widgets/kpropertiesdialog.cpp:2063
 #, kde-format
 msgid ""
 "If this file is an executable and the flag is set, it will be executed with "
 "the permissions of the owner."
 msgstr "如果這個檔案是可執行檔並且設定這個旗標，它將會以擁有者的權限執行。"
 
 #: widgets/kpropertiesdialog.cpp:2068
 #, kde-format
 msgid ""
 "If this flag is set, the group of this folder will be set for all new files."
 msgstr "如果設定這個旗標，此資料夾的群組將會設定到所有新檔案。"
 
 #: widgets/kpropertiesdialog.cpp:2071
 #, kde-format
 msgid ""
 "If this file is an executable and the flag is set, it will be executed with "
 "the permissions of the group."
 msgstr "如果這個檔案是可執行檔並且設定這個旗標，它將會以群組的權限執行。"
 
 #: widgets/kpropertiesdialog.cpp:2076
 #, kde-format
 msgid ""
 "If the Sticky flag is set on a folder, only the owner and root can delete or "
 "rename files. Otherwise everybody with write permissions can do this."
 msgstr ""
 "如果在資料夾上設定相黏旗標，只有擁有者和 root 可以刪除或重新命名檔案。否則任"
 "何具有寫入權限的人都可以進行此項動作。"
 
 #: widgets/kpropertiesdialog.cpp:2080
 #, kde-format
 msgid ""
 "The Sticky flag on a file is ignored on Linux, but may be used on some "
 "systems"
 msgstr "在檔案上的相黏旗標會被 Linux 忽略，但是可能會被某些系統使用"
 
 #: widgets/kpropertiesdialog.cpp:2145
 #, kde-format
 msgid "Set UID"
 msgstr "SUID"
 
 #: widgets/kpropertiesdialog.cpp:2149
 #, kde-format
 msgid "Set GID"
 msgstr "SGID"
 
 #: widgets/kpropertiesdialog.cpp:2153
 #, kde-format
 msgctxt "File permission"
 msgid "Sticky"
 msgstr "相黏"
 
 #: widgets/kpropertiesdialog.cpp:2273
 #, kde-format
 msgid "Link"
 msgstr "連結"
 
 #: widgets/kpropertiesdialog.cpp:2292
 #, kde-format
 msgid "Varying (No Change)"
 msgstr "變化（沒有改變）"
 
 #: widgets/kpropertiesdialog.cpp:2405
 #, kde-format
 msgid "This file uses advanced permissions"
 msgid_plural "These files use advanced permissions."
 msgstr[0] "這些檔案使用進階的權限。"
 
 #: widgets/kpropertiesdialog.cpp:2426
 #, kde-format
 msgid "This folder uses advanced permissions."
 msgid_plural "These folders use advanced permissions."
 msgstr[0] "這些資料夾使用進階的權限。"
 
 #: widgets/kpropertiesdialog.cpp:2441
 #, kde-format
 msgid "These files use advanced permissions."
 msgstr "這些檔案使用進階的權限。"
 
 #: widgets/kpropertiesdialog.cpp:2680
 #, kde-format
 msgctxt "@title:tab"
 msgid "C&hecksums"
 msgstr "總和檢查碼(&H)"
 
 #: widgets/kpropertiesdialog.cpp:2741 widgets/kpropertiesdialog.cpp:2752
 #: widgets/kpropertiesdialog.cpp:2763
 #, kde-format
 msgctxt "@action:button"
 msgid "Calculating..."
 msgstr "計算中..."
 
 #: widgets/kpropertiesdialog.cpp:2907
 #, kde-format
 msgid "Invalid checksum."
 msgstr "無效的總和檢查碼。"
 
 #: widgets/kpropertiesdialog.cpp:2910
 #, kde-format
 msgctxt "@info:tooltip"
 msgid "The given input is not a valid MD5, SHA1 or SHA256 checksum."
 msgstr "給定的輸入不是有效的 MD5、SHA1 或 SHA256 總和檢查碼。"
 
 #: widgets/kpropertiesdialog.cpp:2921
 #, kde-format
 msgid "Checksums match."
 msgstr "總和檢查碼符合。"
 
 #: widgets/kpropertiesdialog.cpp:2924
 #, kde-format
 msgctxt "@info:tooltip"
 msgid "The computed checksum and the expected checksum match."
 msgstr "計算出來的總和檢查碼與預期中的符合。"
 
 #: widgets/kpropertiesdialog.cpp:2935
 #, kde-format
 msgid ""
 "<p>Checksums do not match.</p>This may be due to a faulty download. Try re-"
 "downloading the file.<br/>If the verification still fails, contact the "
 "source of the file."
 msgstr ""
 "<p>總和檢查碼不符合。</p>這可能是中間有失誤的下載所導致。請試著重新下載檔案。"
 "<br/>若驗證持續失敗，請連絡 原始檔案的提供者。"
 
 #: widgets/kpropertiesdialog.cpp:2940
 #, kde-format
 msgctxt "@info:tooltip"
 msgid "The computed checksum and the expected checksum differ."
 msgstr "計算出來的總和檢查碼與預期中的不同。"
 
 #: widgets/kpropertiesdialog.cpp:2948
 #, kde-format
 msgctxt "notify the user about a computation in the background"
 msgid "Verifying checksum..."
 msgstr "正在檢查總和碼..."
 
 #: widgets/kpropertiesdialog.cpp:3031
 #, kde-format
 msgid "U&RL"
 msgstr "URL(&R)"
 
 #: widgets/kpropertiesdialog.cpp:3038
 #, kde-format
 msgid "URL:"
 msgstr "URL："
 
 #: widgets/kpropertiesdialog.cpp:3118 widgets/kpropertiesdialog.cpp:3692
 #, kde-format
 msgid ""
 "Could not save properties. Only entries on local file systems are supported."
 msgstr "無法儲存屬性。只支援本地檔案系統的項目。"
 
 #: widgets/kpropertiesdialog.cpp:3184
 #, kde-format
 msgid "De&vice"
 msgstr "裝置(&V)"
 
 #: widgets/kpropertiesdialog.cpp:3213
 #, kde-format
 msgid "Device (/dev/fd0):"
 msgstr "裝置 (/dev/fd0)："
 
 #: widgets/kpropertiesdialog.cpp:3214
 #, kde-format
 msgid "Device:"
 msgstr "裝置："
 
 #: widgets/kpropertiesdialog.cpp:3227
 #, kde-format
 msgid "Read only"
 msgstr "唯讀"
 
 #: widgets/kpropertiesdialog.cpp:3231
 #, kde-format
 msgid "File system:"
 msgstr "檔案系統:"
 
 #: widgets/kpropertiesdialog.cpp:3239
 #, kde-format
 msgid "Mount point (/mnt/floppy):"
 msgstr "裝載點 (/mnt/floppy)："
 
 #: widgets/kpropertiesdialog.cpp:3240
 #, kde-format
 msgid "Mount point:"
 msgstr "裝載點："
 
 #: widgets/kpropertiesdialog.cpp:3485
 #, kde-format
 msgid "&Application"
 msgstr "應用程式(&A)"
 
 #: widgets/kpropertiesdialog.cpp:3630
 #, kde-format
 msgid "Add File Type for %1"
 msgstr "加入 %1 的檔案類型"
 
 #: widgets/kpropertiesdialog.cpp:3631
 #, kde-format
 msgid "Select one or more file types to add:"
 msgstr "選擇一個或多個要加入的檔案類型："
 
 #: widgets/kpropertiesdialog.cpp:3771
 #, kde-format
 msgid "Only executables on local file systems are supported."
 msgstr "只支援本地檔案系統的執行檔。"
 
 #: widgets/kpropertiesdialog.cpp:3785
 #, kde-format
 msgid "Advanced Options for %1"
 msgstr "%1 的進階選項"
 
 #: widgets/krun.cpp:194
 #, kde-format
 msgid ""
 "<qt>Unable to enter <b>%1</b>.\n"
 "You do not have access rights to this location.</qt>"
 msgstr ""
 "<qt>無法進入 <b>%1</b>。\n"
 "您沒有這個位置的存取權限。</qt>"
 
 #: widgets/krun.cpp:224
 #, kde-format
 msgid ""
 "<qt>The file <b>%1</b> is an executable program. For safety it will not be "
 "started.</qt>"
 msgstr "<qt>檔案 <b>%1</b> 是一個可執行的程式。為了安全將不會執行它。</qt>"
 
 #: widgets/krun.cpp:230
 #, kde-format
 msgid "<qt>You do not have permission to run <b>%1</b>.</qt>"
 msgstr "<qt>您沒有執行 <b>%1</b> 的權限。</qt>"
 
 #: widgets/krun.cpp:260
 #, kde-format
 msgid "You are not authorized to select an application to open this file."
 msgstr "您未獲授權去選取應用程式以開啟此檔案。"
 
 #: widgets/krun.cpp:321
 #, kde-format
 msgid "You are not authorized to execute this file."
 msgstr "您未獲授權去執行此檔案。"
 
 #: widgets/krun.cpp:345
 #, kde-format
 msgid "Launching %1"
 msgstr "裝載 %1 中"
 
 #: widgets/krun.cpp:449
 #, kde-format
 msgid "Error processing Exec field in %1"
 msgstr "處理 %1 中的 Exec 欄位時發生錯誤"
 
 #: widgets/krun.cpp:656
 #, kde-format
 msgid "You are not authorized to execute this service."
 msgstr "您未獲授權去執行此服務。"
 
 #: widgets/krun.cpp:661
 #, kde-format
 msgctxt "Warning about executing unknown .desktop file"
 msgid "Warning"
 msgstr "警告"
 
 #: widgets/krun.cpp:678
 #, kde-format
 msgctxt "program name follows in a line edit below"
 msgid "This will start the program:"
 msgstr "這會啟動此程式："
 
 #: widgets/krun.cpp:695
 #, kde-format
 msgid "If you do not trust this program, click Cancel"
 msgstr "若您不信任此程式，請點擊「取消」"
 
 #: widgets/krun.cpp:738
 #, kde-format
 msgid "Unable to make the service %1 executable, aborting execution"
 msgstr "無法將服務 %1 設成可執行。動作中止"
 
 #: widgets/krun.cpp:975
 #, kde-format
 msgid ""
 "<qt>Unable to run the command specified. The file or folder <b>%1</b> does "
 "not exist.</qt>"
 msgstr "<qt>無法執行指定的命令。這個檔案或資料夾 <b>%1</b> 不存在。</qt>"
 
 #: widgets/krun.cpp:1035
 #, kde-format
 msgid "Could not find any application or handler for %1"
 msgstr "找不到任何 %1 的應用程式或操作器"
 
 #: widgets/krun.cpp:1658
 #, kde-format
 msgid "Could not find the program '%1'"
 msgstr "找不到程式「%1」"
 
 #: widgets/ksslinfodialog.cpp:57
 #, kde-format
 msgid "KDE SSL Information"
 msgstr "KDE SSL 資訊"
 
 #: widgets/ksslinfodialog.cpp:69
 #, kde-format
 msgctxt "The receiver of the SSL certificate"
 msgid "Subject"
 msgstr "主旨"
 
 #: widgets/ksslinfodialog.cpp:70
 #, kde-format
 msgctxt "The authority that issued the SSL certificate"
 msgid "Issuer"
 msgstr "配發者"
 
 #: widgets/ksslinfodialog.cpp:86 widgets/ksslinfodialog.cpp:120
 #, kde-format
 msgid "Current connection is secured with SSL."
 msgstr "目前連線使用 SSL 安全機制。"
 
 #: widgets/ksslinfodialog.cpp:89 widgets/ksslinfodialog.cpp:133
 #, kde-format
 msgid "Current connection is not secured with SSL."
 msgstr "目前連線沒有使用 SSL 安全機制。"
 
 #: widgets/ksslinfodialog.cpp:93
 #, kde-format
 msgid "SSL support is not available in this build of KDE."
 msgstr "SSL 支援在這個版本的 KDE 不可獲得。"
 
 #: widgets/ksslinfodialog.cpp:123
 #, kde-format
 msgid ""
 "The main part of this document is secured with SSL, but some parts are not."
 msgstr "該文件內的主要部份是使用 SSL 連線，但是有些部份則不是。"
 
 #: widgets/ksslinfodialog.cpp:129
 #, kde-format
 msgid "Some of this document is secured with SSL, but the main part is not."
 msgstr "該文件內的一部份有是使用 SSL 保護，但是主要部份都不是。"
 
 #: widgets/ksslinfodialog.cpp:179
 #, kde-format
 msgctxt "%1, using %2 bits of a %3 bit key"
 msgid "%1, %2 %3"
 msgstr "%1，%2 %3"
 
 #: widgets/ksslinfodialog.cpp:181
 #, kde-format
 msgctxt "Part of: %1, using %2 bits of a %3 bit key"
 msgid "using %1 bit"
 msgid_plural "using %1 bits"
 msgstr[0] "使用 %1 位元，"
 
 #: widgets/ksslinfodialog.cpp:183
 #, kde-format
 msgctxt "Part of: %1, using %2 bits of a %3 bit key"
 msgid "of a %1 bit key"
 msgid_plural "of a %1 bit key"
 msgstr[0] "於 %1 位元金鑰中"
 
 #: widgets/ksslinfodialog.cpp:199
 #, kde-format
 msgctxt "The certificate is not trusted"
 msgid "NO, there were errors:"
 msgstr "否，有一些錯誤："
 
 #: widgets/ksslinfodialog.cpp:205
 #, kde-format
 msgctxt "The certificate is trusted"
 msgid "Yes"
 msgstr "是"
 
 #: widgets/ksslinfodialog.cpp:209
 #, kde-format
 msgctxt "%1 is the effective date of the certificate, %2 is the expiry date"
 msgid "%1 to %2"
 msgstr "%1 到 %2"
 
 #: widgets/kurifiltersearchprovideractions.cpp:94
 #, kde-format
 msgid "Search for '%1' with"
 msgstr "搜尋 %1 於？"
 
 #: widgets/kurifiltersearchprovideractions.cpp:99
 #, kde-format
 msgctxt "@action:inmenu Search for <text> with"
 msgid "%1"
 msgstr "%1"
 
 #: widgets/kurifiltersearchprovideractions.cpp:108
 #, kde-format
 msgid "Configure Web Shortcuts..."
 msgstr "設定網頁捷徑..."
 
 #: widgets/kurlrequester.cpp:324
 #, kde-format
 msgid "Open file dialog"
 msgstr "開啟檔案對話方塊"
 
 #: widgets/paste.cpp:113 widgets/paste.cpp:161 widgets/pastejob.cpp:72
 #, kde-format
 msgid "Filename for clipboard content:"
 msgstr "剪貼簿內容的檔名："
 
 #: widgets/paste.cpp:153
 #, kde-format
 msgid "%1 (%2)"
 msgstr "%1 (%2)"
 
 #: widgets/paste.cpp:172
 #, kde-format
 msgid ""
 "The clipboard has changed since you used 'paste': the chosen data format is "
 "no longer applicable. Please copy again what you wanted to paste."
 msgstr ""
 "當您使用「貼上」時剪貼簿已經改變了：所選擇的資料格式已經不適用了。請再次複製"
 "您所想要貼上的項目。"
 
 #: widgets/paste.cpp:303
 #, kde-format
 msgid "&Paste File"
 msgid_plural "&Paste %1 Files"
 msgstr[0] "貼上 %1 個檔案(&P)"
 
 #: widgets/paste.cpp:305
 #, kde-format
 msgid "&Paste URL"
 msgid_plural "&Paste %1 URLs"
 msgstr[0] "貼上 %1 個網址(&P)"
 
 #: widgets/paste.cpp:308
 #, kde-format
 msgid "&Paste Clipboard Contents"
 msgstr "貼上剪貼簿內容(&P)"
 
 #: widgets/paste.cpp:342
 #, kde-format
 msgctxt "@action:inmenu"
 msgid "Paste One Folder"
 msgstr "貼上 1 個資料夾"
 
 #: widgets/paste.cpp:343
 #, kde-format
 msgctxt "@action:inmenu"
 msgid "Paste One File"
 msgstr "貼上 1 個檔案"
 
 #: widgets/paste.cpp:345
 #, kde-format
 msgctxt "@action:inmenu"
 msgid "Paste One Item"
 msgid_plural "Paste %1 Items"
 msgstr[0] "貼上 %1 個項目"
 
 #: widgets/paste.cpp:347
 #, kde-format
 msgctxt "@action:inmenu"
 msgid "Paste Clipboard Contents..."
 msgstr "貼上剪貼簿內容..."
 
 #: widgets/paste.cpp:351
 #, kde-format
 msgctxt "@action:inmenu"
 msgid "Paste"
 msgstr "貼上"
 
 #: widgets/pastedialog.cpp:57
 #, kde-format
 msgid "Data format:"
 msgstr "資料格式:"
 
 #: widgets/pastejob.cpp:72
 #, kde-format
 msgid "Filename for dropped contents:"
 msgstr "放入內容的檔名："
 
 #: widgets/renamedialog.cpp:77
 #, kde-format
 msgid "Date: %1"
 msgstr "日期：%1"
 
 #: widgets/renamedialog.cpp:83
 #, kde-format
 msgid "Size: %1"
 msgstr "大小：%1"
 
 #: widgets/renamedialog.cpp:172
 #, kde-format
 msgid "Appl&y to All"
 msgstr "全部套用(&Y)"
 
 #: widgets/renamedialog.cpp:173
 #, kde-format
 msgid ""
 "When this is checked the button pressed will be applied to all subsequent "
 "folder conflicts for the remainder of the current job.\n"
 "Unless you press Skip you will still be prompted in case of a conflict with "
 "an existing file in the directory."
 msgstr ""
 "勾選此選項的話，此按鍵按下後會套用到目前工作剩餘的，所有的衝突資料夾。\n"
 "除非您按下「跳過」，否則您還是會接到目錄中現有檔案的衝突。"
 
 #: widgets/renamedialog.cpp:174
 #, kde-format
 msgid ""
 "When this is checked the button pressed will be applied to all subsequent "
 "conflicts for the remainder of the current job."
 msgstr "勾選此選項的話，按下按鍵會套用到目前工作剩餘的所有衝突。"
 
 #: widgets/renamedialog.cpp:179
 #, kde-format
 msgid "&Rename"
 msgstr "重新命名(&R)"
 
 #: widgets/renamedialog.cpp:181
 #, kde-format
 msgid "Suggest New &Name"
 msgstr "建議的新名稱(&N)"
 
 #: widgets/renamedialog.cpp:187
 #, kde-format
 msgid "&Skip"
 msgstr "略過(&S)"
 
 #: widgets/renamedialog.cpp:188
 #, kde-format
 msgid "Do not copy or move this folder, skip to the next item instead"
 msgstr "不要複製或移動此資料夾，而跳到下一個項目"
 
 #: widgets/renamedialog.cpp:189
 #, kde-format
 msgid "Do not copy or move this file, skip to the next item instead"
 msgstr "不要複製或移動此檔案，而跳到下一個項目"
 
 #: widgets/renamedialog.cpp:194
 #, kde-format
 msgctxt "Write files into an existing folder"
 msgid "&Write Into"
 msgstr "寫入(&W)"
 
 #: widgets/renamedialog.cpp:194
 #, kde-format
 msgid "&Overwrite"
 msgstr "覆寫(&O)"
 
 #: widgets/renamedialog.cpp:196
 #, kde-format
 msgid ""
 "Files and folders will be copied into the existing directory, alongside its "
 "existing contents.\n"
 "You will be prompted again in case of a conflict with an existing file in "
 "the directory."
 msgstr ""
 "檔案與資料夾會複製到現有的目錄，與現有的內容並存。\n"
 "
若是與現有的檔案衝突，您會收到一個提示。"
 
 #: widgets/renamedialog.cpp:201
 #, kde-format
 msgid "&Resume"
 msgstr "恢復(&R)"
 
 #: widgets/renamedialog.cpp:210
 #, kde-format
 msgid ""
 "This action would overwrite '%1' with itself.\n"
 "Please enter a new file name:"
 msgstr ""
 "此動作將覆寫「%1」它自己。\n"
 "請輸入新的檔案名稱："
 
 #: widgets/renamedialog.cpp:215
 #, kde-format
 msgid "C&ontinue"
 msgstr "繼續(&O)"
 
 #: widgets/renamedialog.cpp:270
 #, kde-format
 msgid "This action will overwrite the destination."
 msgstr "此動作將覆寫目的地。"
 
 #: widgets/renamedialog.cpp:274
 #, kde-format
 msgid "Warning, the destination is more recent."
 msgstr "警告，目的地比較新。"
 
 #: widgets/renamedialog.cpp:280
 #, kde-format
 msgid "Source"
 msgstr "來源"
 
 #: widgets/renamedialog.cpp:282
 #, kde-format
 msgid "Destination"
 msgstr "目的地"
 
 #: widgets/renamedialog.cpp:312
 #, kde-format
 msgid "An older item named '%1' already exists."
 msgstr "舊項目中已經有一個叫做「%1」存在了。"
 
 #: widgets/renamedialog.cpp:314
 #, kde-format
 msgid "A similar file named '%1' already exists."
 msgstr "另一個名為 %1 的同類檔案已經存在。"
 
 #: widgets/renamedialog.cpp:316
 #, kde-format
 msgid "A more recent item named '%1' already exists."
 msgstr "已經有一個更新的，叫做「%1」的項目存在了。"
 
 #: widgets/renamedialog.cpp:329
 #, kde-format
 msgid "Rename:"
 msgstr "重新命名："
 
 #: widgets/skipdialog.cpp:38
 #, kde-format
 msgid "Information"
 msgstr "資訊"
 
 #: widgets/skipdialog.cpp:48
 #, kde-format
 msgid "Retry"
 msgstr "重試"
 
 #: widgets/skipdialog.cpp:53
 #, kde-format
 msgid "Skip"
 msgstr "略過"
 
 #: widgets/skipdialog.cpp:57
 #, kde-format
 msgid "AutoSkip"
 msgstr "自動略過"
 
 #. i18n: ectx: property (text), widget (QLabel, encryptionIndicator)
 #: widgets/sslinfo.ui:17
 #, kde-format
 msgid "[padlock]"
 msgstr "[padlock]"
 
 #. i18n: ectx: property (text), widget (QLabel, addressTag)
 #: widgets/sslinfo.ui:34
 #, kde-format
 msgctxt "Web page address"
 msgid "Address:"
 msgstr "位址："
 
 #. i18n: ectx: property (text), widget (QLabel, ipTag)
 #: widgets/sslinfo.ui:54
 #, kde-format
 msgid "IP address:"
 msgstr "IP 位址："
 
 #. i18n: ectx: property (text), widget (QLabel, encryptionTag)
 #: widgets/sslinfo.ui:74
 #, kde-format
 msgid "Encryption:"
 msgstr "加密："
 
 #. i18n: ectx: property (text), widget (QLabel, detailsTag)
 #: widgets/sslinfo.ui:94
 #, kde-format
 msgid "Details:"
 msgstr "詳細資料："
 
 #. i18n: ectx: property (text), widget (QLabel, sslVersionTag)
 #: widgets/sslinfo.ui:114
 #, kde-format
 msgid "SSL version:"
 msgstr "SSL 版本："
 
 #. i18n: ectx: property (text), widget (QLabel, certSelectorTag)
 #: widgets/sslinfo.ui:134
 #, kde-format
 msgid "Certificate chain:"
 msgstr "憑證鍊："
 
 #. i18n: ectx: property (text), widget (QLabel, trustedTag)
 #: widgets/sslinfo.ui:163
 #, kde-format
 msgid "Trusted:"
 msgstr "信任："
 
 #. i18n: ectx: property (text), widget (QLabel, validityPeriodTag)
 #: widgets/sslinfo.ui:183
 #, kde-format
 msgid "Validity period:"
 msgstr "有效期間："
 
 #. i18n: ectx: property (text), widget (QLabel, serialTag)
 #: widgets/sslinfo.ui:203
 #, kde-format
 msgid "Serial number:"
 msgstr "序號："
 
 #. i18n: ectx: property (text), widget (QLabel, digestTag)
 #: widgets/sslinfo.ui:223
 #, kde-format
 msgid "MD5 digest:"
 msgstr "MD5 摘要："
 
 #. i18n: ectx: property (text), widget (QLabel, sha1DigestTag)
 #: widgets/sslinfo.ui:243
 #, kde-format
 msgid "SHA1 digest:"
 msgstr "SHA1 摘要："
 
 #: widgets/sslui.cpp:49
 #, kde-format
 msgid ""
 "The remote host did not send any SSL certificates.\n"
 "Aborting because the identity of the host cannot be established."
 msgstr ""
 "遠端主機並未送出任何 SSL 憑證。\n"
 "因為無法建立主機身份，因此將中止。"
Index: trunk/l10n-kf5/zh_TW/messages/frameworks/knewstuff5.po
===================================================================
--- trunk/l10n-kf5/zh_TW/messages/frameworks/knewstuff5.po	(revision 1537713)
+++ trunk/l10n-kf5/zh_TW/messages/frameworks/knewstuff5.po	(revision 1537714)
@@ -1,972 +1,972 @@
 # translation of kdelibs4.po to Chinese Traditional
 # Copyright (C) 2001, 2002, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
 # Eric Cheng <ericc@shinewave.com.tw>, unknown.
 # This file referenced zh_CN translations at 2002.
 # Chih-Wei Huang <cwhuang@linux.org.tw>, 2001.
 # Kenduest Lee <kenduest@i18n.linux.org.tw>, 2001, 2002.
 # Jouston Huang (Huang, Jiun-Jeng) <jouston@housediy.com>, 2002.
 # Chia-Lin, Kao <acelan@linux.org.tw>, 2004.
 # Yuan-Chen Cheng <ycheng@slat.org>, 2002.
 # Goodhorse <franklin@goodhorse.idv.tw>, 2008.
 # Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv dot tw>, 2006-2009, 2010.
 # Franklin Weng <franklin@mail.everfocus.com.tw>, 2010, 2011, 2012.
 # Franklin Weng <franklin@goodhorse.idv.tw>, 2010, 2011, 2012, 2013, 2014, 2015.
 # Jeff Huang <s8321414@gmail.com>, 2016, 2017.
-# pan93412 <pan93412@gmail.com>, 2018.
+# pan93412 <pan93412@gmail.com>, 2018, 2019.
 msgid ""
 msgstr ""
 "Project-Id-Version: kdelibs4\n"
 "Report-Msgid-Bugs-To: http://bugs.kde.org\n"
 "POT-Creation-Date: 2019-03-19 03:13+0100\n"
-"PO-Revision-Date: 2018-07-09 21:41+0800\n"
+"PO-Revision-Date: 2019-03-19 19:27+0800\n"
 "Last-Translator: pan93412 <pan93412@gmail.com>\n"
 "Language-Team: Chinese <zh-l10n@linux.org.tw>\n"
 "Language: zh_TW\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Lokalize 2.0\n"
+"X-Generator: Lokalize 18.12.3\n"
 "Plural-Forms: nplurals=1; plural=0;\n"
 
 #: attica/atticaprovider.cpp:166
 #, kde-format
 msgid "All categories are missing"
 msgstr "所有類別遺失"
 
 #: attica/atticaprovider.cpp:362
 #, kde-format
 msgctxt ""
 "the price of a download item, parameter 1 is the currency, 2 is the price"
 msgid ""
 "This item costs %1 %2.\n"
 "Do you want to buy it?"
 msgstr ""
 "此項目價值 %1 %2。\n"
 "您要購買嗎？"
 
 #: attica/atticaprovider.cpp:376
 #, kde-format
 msgid ""
 "Your account balance is too low:\n"
 "Your balance: %1\n"
 "Price: %2"
 msgstr ""
 "您的帳戶餘額過低。\n"
 "您的餘額為：%1\n"
 "價格為： %2"
 
 #: attica/atticaprovider.cpp:418
 #, kde-format
 msgctxt "voting for an item (good/bad)"
 msgid "Your vote was recorded."
 msgstr "您的投票已被紀錄。"
 
 #: attica/atticaprovider.cpp:433
 #, kde-format
 msgid "You are now a fan."
 msgstr "您現在成為粉絲了。"
 
 #: attica/atticaprovider.cpp:444
 #, kde-format
 msgid "Network error %1: %2"
 msgstr "網路錯誤 %1：%2"
 
 #: attica/atticaprovider.cpp:448
 #, kde-format
 msgid "Too many requests to server. Please try again in a few minutes."
 msgstr "太多要求到伺服器。請稍等幾分鐘後再嘗試。"
 
 #: attica/atticaprovider.cpp:450
 #, kde-format
 msgid ""
 "The Open Collaboration Services instance %1 does not support the attempted "
 "function."
-msgstr ""
+msgstr "%1 開放協同服務實例不支援嘗試使用的功能。"
 
 #: attica/atticaprovider.cpp:452
 #, kde-format
 msgid "Unknown Open Collaboration Service API error. (%1)"
 msgstr "未知的開放協同服務 API 錯誤。(%1)"
 
 #: button.cpp:52
 #, kde-format
 msgid "Download New Stuff..."
 msgstr "下載熱門禮物..."
 
 #: core/engine.cpp:106
 #, kde-format
 msgid "Initializing"
 msgstr "初始化中"
 
 #: core/engine.cpp:127
 #, kde-format
 msgid "Configuration file exists, but cannot be opened: \"%1\""
 msgstr "設定檔已存在，但無法開啟：「%1」"
 
 #: core/engine.cpp:140
 #, kde-format
 msgid "Configuration file is invalid: \"%1\""
 msgstr "設定檔不合法：%1"
 
 #: core/engine.cpp:204
 #, kde-format
 msgid "Loading provider information"
 msgstr "載入提供者資訊中"
 
 #: core/engine.cpp:233
 #, kde-format
 msgid "Could not load get hot new stuff providers from file: %1"
 msgstr "無法從檔案 %1 載入熱門新玩意的供應者"
 
 #: core/engine.cpp:256
 #, kde-format
 msgid "Error initializing provider."
 msgstr "初始化提供者時發生錯誤。"
 
 #: core/engine.cpp:260 core/engine.cpp:660
 #, kde-format
 msgid "Loading data"
 msgstr "載入資料中"
 
 #: core/engine.cpp:297
 #, kde-format
 msgid "Loading data from provider"
 msgstr "從提供者載入資料中"
 
 #: core/engine.cpp:302
 #, kde-format
 msgid "Loading of providers from file: %1 failed"
 msgstr "從檔案 %1 載入提供者失敗"
 
 #: core/engine.cpp:620
 #, kde-format
 msgid "Re: %1"
 msgstr "重做：%1"
 
 #: core/engine.cpp:662
 #, kde-format
 msgid "Loading one preview"
 msgid_plural "Loading %1 previews"
 msgstr[0] "載入 %1 個預覽"
 
 #: core/engine.cpp:664 ui/itemsgridviewdelegate.cpp:343
 #: ui/itemsviewdelegate.cpp:134
 #, kde-format
 msgid "Installing"
 msgstr "安裝中"
 
 #: core/installation.cpp:185
 #, kde-format
 msgid "Invalid item."
 msgstr "無效的項目"
 
 #: core/installation.cpp:192
 #, kde-format
 msgid "Download of item failed: no download URL for \"%1\"."
 msgstr "下載項目失敗：沒有 %1 的下載網址。"
 
 #: core/installation.cpp:231
 #, kde-format
 msgid "Download of \"%1\" failed, error: %2"
 msgstr "下載 %1 失敗，錯誤：%2"
 
 #: core/installation.cpp:241
 #, kde-format
 msgid ""
 "The downloaded file is a html file. This indicates a link to a website "
 "instead of the actual download. Would you like to open the site with a "
 "browser instead?"
 msgstr ""
 "下載的檔案是一個 html 檔。它指向一個網站而不是實際上會下載內容。您要改成用瀏"
 "覽器開啟此網站嗎？"
 
 #: core/installation.cpp:242
 #, kde-format
 msgid "Possibly bad download link"
 msgstr "可能是錯誤的下載連結"
 
 #: core/installation.cpp:245
 #, kde-format
 msgid "Downloaded file was a HTML file. Opened in browser."
 msgstr "下載的檔案是一個 HTML 檔。在瀏覽器內開啟。"
 
 #: core/installation.cpp:307
 #, kde-format
 msgid "Could not install \"%1\": file not found."
 msgstr "無法安裝 %1：找不到檔案。"
 
 #: core/installation.cpp:539
 #, kde-format
 msgid "Overwrite existing file?"
 msgstr "要覆寫現有檔案嗎？"
 
 #: core/installation.cpp:540
 #, kde-format
 msgid "Download File"
 msgstr "下載檔案"
 
 #: core/security.cpp:84
 #, kde-format
 msgid ""
 "<qt>Cannot start <i>gpg</i> and retrieve the available keys. Make sure that "
 "<i>gpg</i> is installed, otherwise verification of downloaded resources will "
 "not be possible.</qt>"
 msgstr ""
 "<qt>無法開啟<i>gpg</i>來取得可用的密鑰。請確定<i>gpg</i>已安裝，否則將無法對"
 "下載的資源進行檢驗。</qt>"
 
 #: core/security.cpp:208
 #, kde-format
 msgid ""
 "<qt>Enter passphrase for key <b>0x%1</b>, belonging to<br /><i>%2&lt;%3&gt;</"
 "i><br />:</qt>"
 msgstr ""
 "<qt>請輸入金鑰<b>0x%1</b>的密碼片語。這個金鑰是屬於<br /><i>%2&lt;%3&gt;</i>"
 "的<br />：</qt>"
 
 #: core/security.cpp:286
 #, kde-format
 msgid ""
 "<qt>Cannot start <i>gpg</i> and check the validity of the file. Make sure "
 "that <i>gpg</i> is installed, otherwise verification of downloaded resources "
 "will not be possible.</qt>"
 msgstr ""
 "<qt>無法開啟<i>gpg</i>來檢驗檔案。請確定<i>gpg</i>已安裝，否則將無法對下載的"
 "資源進行檢驗。</qt>"
 
 #: core/security.cpp:341
 #, kde-format
 msgid "Key used for signing:"
 msgstr "用作簽署的密鑰："
 
 #: core/security.cpp:342
 #, kde-format
 msgid "Select Signing Key"
 msgstr "選擇用作簽署的密鑰"
 
 #: core/security.cpp:377
 #, kde-format
 msgid ""
 "<qt>Cannot start <i>gpg</i> and sign the file. Make sure that <i>gpg</i> is "
 "installed, otherwise signing of the resources will not be possible.</qt>"
 msgstr ""
 "<qt>無法開啟<i>gpg</i>來簽署檔案。請確定<i>gpg</i>已安裝，否則將無法對資源進"
 "行簽署。</qt>"
 
 #: downloaddialog.cpp:83 downloadwidget.cpp:223
 #, kde-format
 msgid "Get Hot New Stuff"
 msgstr "取得熱門新玩意"
 
 #: downloaddialog.cpp:101
 #, kde-format
 msgctxt "Program name followed by 'Add On Installer'"
 msgid "%1 Add-On Installer"
 msgstr "%1 新增安裝器"
 
 #: downloadwidget.cpp:132
 #, kde-format
 msgid "Timeout. Check Internet connection."
 msgstr "發生逾時。請檢查網路連線。"
 
 #: downloadwidget.cpp:195
 #, kde-format
 msgid "Server: %1"
 msgstr "伺服器：%1"
 
 #: downloadwidget.cpp:196
 #, kde-format
 msgid "<br />Provider: %1"
 msgstr "<br />提供者：%1"
 
 #: downloadwidget.cpp:197
 #, kde-format
 msgid "<br />Version: %1"
 msgstr "<br />版本：%1"
 
 #: downloadwidget.cpp:201
 #, kde-format
 msgid "Provider information"
 msgstr "提供者資訊"
 
 #: downloadwidget.cpp:212
 #, kde-format
 msgid "Could not install %1"
 msgstr "無法安裝 %1"
 
 #: downloadwidget.cpp:213
 #, kde-format
 msgid "Get Hot New Stuff!"
 msgstr "取得熱門新玩意"
 
 #: downloadwidget.cpp:268
 #, kde-format
 msgid "Icons view mode"
 msgstr "圖示檢視模式"
 
 #: downloadwidget.cpp:270
 #, kde-format
 msgid "Details view mode"
 msgstr "詳細資料檢視模式"
 
 #: downloadwidget.cpp:285
 #, kde-format
 msgid "All Providers"
 msgstr "所有提供者"
 
 #: downloadwidget.cpp:292
 #, kde-format
 msgid "All Categories"
 msgstr "所有分類"
 
 #. i18n: ectx: property (text), widget (QLabel, m_providerLabel)
 #. i18n: ectx: property (text), widget (QLabel, label_9)
 #: downloadwidget.ui:54 uploaddialog.ui:127
 #, kde-format
 msgid "Provider:"
 msgstr "提供者："
 
 #. i18n: ectx: property (text), widget (QLabel, m_categoryLabel)
 #. i18n: ectx: property (text), widget (QLabel, mCategoryLabel)
 #: downloadwidget.ui:71 uploaddialog.ui:304
 #, kde-format
 msgid "Category:"
 msgstr "類別："
 
 #. i18n: ectx: property (text), widget (QRadioButton, mostDownloadsRadio)
 #: downloadwidget.ui:90
 #, kde-format
 msgid "Most downloads"
 msgstr "最多下載"
 
 #. i18n: ectx: property (text), widget (QRadioButton, newestRadio)
 #: downloadwidget.ui:103
 #, kde-format
 msgid "Newest"
 msgstr "最新的"
 
 #. i18n: ectx: property (text), widget (QRadioButton, ratingRadio)
 #: downloadwidget.ui:110
 #, kde-format
 msgid "Rating"
 msgstr "評分"
 
 #. i18n: ectx: property (text), widget (QRadioButton, installedRadio)
 #: downloadwidget.ui:117
 #, kde-format
 msgid "Installed"
 msgstr "已安裝"
 
 #. i18n: ectx: property (text), widget (QLabel, orderLabel)
 #: downloadwidget.ui:175
 #, kde-format
 msgid "Order by:"
 msgstr "排序依據："
 
 #. i18n: ectx: property (text), widget (QLabel, label_4)
 #: downloadwidget.ui:185
 #, kde-format
 msgid "Search:"
 msgstr "搜尋："
 
 #. i18n: ectx: property (placeholderText), widget (KLineEdit, m_searchEdit)
 #: downloadwidget.ui:211
 #, kde-format
 msgid "Enter search phrase here"
 msgstr "在此輸入搜尋字串"
 
 #. i18n: ectx: property (text), widget (QLabel, label)
 #: downloadwidget.ui:365
 #, kde-format
 msgid "Author:"
 msgstr "作者："
 
 #. i18n: ectx: property (text), widget (QLabel, homepageLabel)
 #: downloadwidget.ui:390
 #, kde-format
 msgid "<a href=\"http://opendesktop.org\">Homepage</a>"
 msgstr "<a href=\"http://opendesktop.org\">造訪首頁</a>"
 
 #. i18n: ectx: property (text), widget (QPushButton, updateButton)
 #. i18n: ectx: property (text), widget (QRadioButton, radioUpdate)
 #: downloadwidget.ui:566 ui/itemsgridviewdelegate.cpp:338
 #: ui/itemsviewdelegate.cpp:129 uploaddialog.ui:171
 #, kde-format
 msgid "Update"
 msgstr "更新"
 
 #. i18n: ectx: property (text), widget (QPushButton, uninstallButton)
 #: downloadwidget.ui:576 ui/itemsgridviewdelegate.cpp:334
 #: ui/itemsviewdelegate.cpp:125
 #, kde-format
 msgid "Uninstall"
 msgstr "解除安裝"
 
 #. i18n: ectx: property (text), widget (QPushButton, becomeFanButton)
 #: downloadwidget.ui:583
 #, kde-format
 msgid "Become a Fan"
 msgstr "成為粉絲"
 
 #. i18n: ectx: property (text), widget (QPushButton, installButton)
 #: downloadwidget.ui:590 ui/itemsgridviewdelegate.cpp:353
 #: ui/itemsgridviewdelegate.cpp:363 ui/itemsviewdelegate.cpp:144
 #: ui/itemsviewdelegate.cpp:154
 #, kde-format
 msgid "Install"
 msgstr "安裝"
 
 #: kmoretools/kmoretools.cpp:571
 #, kde-format
 msgctxt "@action:inmenu"
 msgid "Not installed:"
 msgstr "未安裝："
 
 #: kmoretools/kmoretools.cpp:671
 #, kde-format
 msgctxt "@action:inmenu"
 msgid "More"
 msgstr "更多"
 
 #: kmoretools/kmoretools.cpp:709
 #, kde-format
 msgctxt "@action:inmenu"
 msgid "Configure..."
 msgstr "設定..."
 
 #: kmoretools/kmoretools_p.h:386
 #, kde-format
 msgctxt "@action:inmenu"
 msgid "Visit homepage"
 msgstr "造訪首頁"
 
 #: kmoretools/kmoretools_p.h:397
 #, kde-format
 msgctxt "@action:inmenu"
 msgid "Install"
 msgstr "安裝"
 
 #: kmoretools/kmoretools_p.h:404
 #, kde-format
 msgctxt "@action:inmenu"
 msgid "No further information available."
 msgstr "找不到更多資訊。"
 
 #: kmoretools/kmoretoolsconfigdialog_p.cpp:187
 #, kde-format
 msgid "Configure menu"
 msgstr "設定選單"
 
 #: kmoretools/kmoretoolsconfigdialog_p.cpp:189
 #, kde-format
 msgid "Configure menu - %1"
 msgstr "設定選單 - %1"
 
 #: kmoretools/kmoretoolsmenufactory.cpp:186
 #, kde-format
 msgctxt "@action:inmenu"
 msgid "$GenericName - current folder"
 msgstr "$GenericName - 目前資料夾"
 
 #: kmoretools/kmoretoolsmenufactory.cpp:194
 #, kde-format
 msgctxt "@action:inmenu"
 msgid "$GenericName - current device"
 msgstr "$GenericName - 目前裝置"
 
 #: kmoretools/kmoretoolsmenufactory.cpp:209
 #, kde-format
 msgctxt "@action:inmenu"
 msgid "$GenericName - all devices"
 msgstr "$GenericName - 所有裝置"
 
 #. i18n: ectx: property (title), widget (QGroupBox, gbMainSection)
 #: kmoretools/ui/kmoretoolsconfigwidget.ui:25
 #, kde-format
 msgid "Main section"
 msgstr "主要區段"
 
 #. i18n: ectx: property (text), widget (QToolButton, buttonMoveDown)
 #: kmoretools/ui/kmoretoolsconfigwidget.ui:58
 #, kde-format
 msgid "Move down"
 msgstr "下移"
 
 #. i18n: ectx: property (text), widget (QToolButton, buttonMoveUp)
 #: kmoretools/ui/kmoretoolsconfigwidget.ui:79
 #, kde-format
 msgid "Move up"
 msgstr "上移"
 
 #. i18n: ectx: property (text), widget (QToolButton, buttonMoveToMain)
 #: kmoretools/ui/kmoretoolsconfigwidget.ui:100
 #, kde-format
 msgid "Move to Main section"
 msgstr "移到主要區段"
 
 #. i18n: ectx: property (text), widget (QToolButton, buttonMoveToMore)
 #: kmoretools/ui/kmoretoolsconfigwidget.ui:121
 #, kde-format
 msgid "Move to More section"
 msgstr "移到更多區段"
 
 #. i18n: ectx: property (text), widget (QPushButton, buttonReset)
 #: kmoretools/ui/kmoretoolsconfigwidget.ui:142
 #, kde-format
 msgid "Reset"
 msgstr "重置"
 
 #. i18n: ectx: property (title), widget (QGroupBox, gbMoreSection)
 #: kmoretools/ui/kmoretoolsconfigwidget.ui:161
 #, kde-format
 msgid "More section"
 msgstr "更多區段"
 
 #. i18n: ectx: property (text), widget (QLabel, label)
 #: kmoretools/ui/kmoretoolsconfigwidget.ui:213
 #, kde-format
 msgid ""
 "For this menu there are some more tools suggested which are currently not "
 "installed:"
 msgstr "在這個選單中，還有些建議使用的工具尚未安裝："
 
 #. i18n: ectx: property (text), widget (QPushButton, buttonNotInstalledTools)
 #: kmoretools/ui/kmoretoolsconfigwidget.ui:223
 #, kde-format
 msgid "More tools..."
 msgstr "更多工具..."
 
 #: qtquick/qml/NewStuffItem.qml:35
 #, kde-format
 msgctxt "Request installation of this item"
 msgid "Install"
 msgstr "安裝"
 
 #: qtquick/qml/NewStuffItem.qml:42
 #, kde-format
 msgctxt "Request updating of this item"
 msgid "Update"
 msgstr "更新"
 
 #: qtquick/qml/NewStuffItem.qml:49
 #, kde-format
 msgctxt "Request uninstallation of this item"
 msgid "Uninstall"
 msgstr "解除安裝"
 
 #: ui/entrydetailsdialog.cpp:91
 #, kde-format
 msgid "Details for %1"
 msgstr "%1 的詳情"
 
 #. i18n: ectx: property (text), widget (QLabel, priceLabel_2)
 #: ui/entrydetailsdialog.cpp:105 uploaddialog.ui:230
 #, kde-format
 msgid "Changelog:"
 msgstr "變更紀錄："
 
 #: ui/entrydetailsdialog.cpp:111
 #, kde-format
 msgctxt "A link to the description of this Get Hot New Stuff item"
 msgid "Homepage"
 msgstr "首頁"
 
 #: ui/entrydetailsdialog.cpp:114
 #, kde-format
 msgctxt ""
 "A link to make a donation for a Get Hot New Stuff item (opens a web browser)"
 msgid "Make a donation"
 msgstr "捐獻"
 
 #: ui/entrydetailsdialog.cpp:118
 #, kde-format
 msgctxt "A link to the knowledgebase (like a forum) (opens a web browser)"
 msgid "Knowledgebase (no entries)"
 msgid_plural "Knowledgebase (%1 entries)"
 msgstr[0] "知識庫（%1 個項目）"
 
 #: ui/entrydetailsdialog.cpp:121
 #, kde-format
 msgctxt "Tooltip for a link in a dialog"
 msgid "Opens in a browser window"
 msgstr "在瀏覽器視窗中開啟"
 
 #: ui/itemsgridviewdelegate.cpp:102 ui/itemsviewdelegate.cpp:282
 #, kde-format
 msgid "Rating: %1%"
 msgstr "評分：%1%"
 
 #: ui/itemsgridviewdelegate.cpp:139
 #, kde-format
 msgctxt "Show the size of the file in a list"
 msgid "<br />Size: %1"
 msgstr "<br />大小：%1"
 
 #: ui/itemsgridviewdelegate.cpp:160 ui/itemsgridviewdelegate.cpp:162
 #: ui/itemsgridviewdelegate.cpp:164 ui/itemsviewdelegate.cpp:242
 #: ui/itemsviewdelegate.cpp:244 ui/itemsviewdelegate.cpp:246
 #, kde-format
 msgctxt "Show the author of this item in a list"
 msgid "By <i>%1</i>"
 msgstr "由 <i>%1</i>"
 
 #: ui/itemsgridviewdelegate.cpp:187 ui/itemsviewdelegate.cpp:260
 #, kde-format
 msgctxt "fan as in supporter"
 msgid "1 fan"
 msgid_plural "%1 fans"
 msgstr[0] "%1 個粉絲"
 
 #: ui/itemsgridviewdelegate.cpp:190 ui/itemsviewdelegate.cpp:263
 #, kde-format
 msgid "1 download"
 msgid_plural "%1 downloads"
 msgstr[0] "下載 %1 次"
 
 #: ui/itemsgridviewdelegate.cpp:256 ui/itemsviewdelegate.cpp:336
 #, kde-format
 msgid "Loading Preview"
 msgstr "載入預覽"
 
 #: ui/itemsgridviewdelegate.cpp:283 ui/itemsviewdelegate.cpp:187
 #, kde-format
 msgid "Details"
 msgstr "詳細資料"
 
 #: ui/itemsgridviewdelegate.cpp:348 ui/itemsviewdelegate.cpp:139
 #, kde-format
 msgid "Updating"
 msgstr "更新中"
 
 #: ui/itemsgridviewdelegate.cpp:358 ui/itemsviewdelegate.cpp:149
 #, kde-format
 msgid "Install Again"
 msgstr "再次安裝"
 
 #: ui/itemsviewdelegate.cpp:175
 #, kde-format
 msgid "Use"
 msgstr "使用"
 
 #: ui/itemsviewdelegate.cpp:231
 #, kde-format
 msgctxt "Show the size of the file in a list"
 msgid "<p>Size: %1</p>"
 msgstr "<p>大小：%1</p>"
 
 #: uploaddialog.cpp:66
 #, kde-format
 msgctxt "Opposite to Back"
 msgid "Next"
 msgstr "下一步"
 
 #: uploaddialog.cpp:71
 #, kde-format
 msgid "Finish"
 msgstr "完成"
 
 #: uploaddialog.cpp:183
 #, kde-format
 msgid "Fetching provider information..."
 msgstr "取得提供者資訊中..."
 
 #: uploaddialog.cpp:190
 #, kde-format
 msgid "Fetching license data from server..."
 msgstr "在伺服器上抓取授權資料..."
 
 #: uploaddialog.cpp:197
 #, kde-format
 msgid "Fetching content data from server..."
 msgstr "在伺服器上抓取內容資料..."
 
 #: uploaddialog.cpp:272
 #, kde-format
 msgid "Could not fetch provider information."
 msgstr "無法取的提供者資訊。"
 
 #: uploaddialog.cpp:296
 #, kde-format
 msgid "Register a new account"
 msgstr "註冊新帳號"
 
 #: uploaddialog.cpp:320
 #, kde-format
 msgid "Checking login..."
 msgstr "檢查登入中..."
 
 #: uploaddialog.cpp:342
 #, kde-format
 msgid "Fetching your previously updated content..."
 msgstr "抓取您上次上傳的內容..."
 
 #: uploaddialog.cpp:345
 #, kde-format
 msgid "Could not verify login, please try again."
 msgstr "無法查驗登入，請再試一次。"
 
 #: uploaddialog.cpp:364
 #, kde-format
 msgid "Fetching your previously updated content finished."
 msgstr "已完成抓取您上次上傳的內容。"
 
 #: uploaddialog.cpp:382
 #, kde-format
 msgid "Fetching content data from server finished."
 msgstr "已完成抓取內容資料。"
 
 #: uploaddialog.cpp:405 uploaddialog.cpp:845
 #, kde-format
 msgctxt "A link to the website where the get hot new stuff upload can be seen"
 msgid "Visit website"
 msgstr "造訪網站"
 
 #. i18n: ectx: property (windowTitle), widget (QWidget, UploadDialog)
 #: uploaddialog.cpp:451 uploaddialog.ui:14
 #, kde-format
 msgid "Share Hot New Stuff"
 msgstr "分享熱門禮物"
 
 #: uploaddialog.cpp:474
 #, kde-format
 msgctxt "Program name followed by 'Add On Uploader'"
 msgid "%1 Add-On Uploader"
 msgstr "%1 外加上傳器"
 
 #: uploaddialog.cpp:494 uploaddialog.cpp:770
 #, kde-format
 msgid "File not found: %1"
 msgstr "檔案找不到：%1"
 
 #: uploaddialog.cpp:494 uploaddialog.cpp:621 uploaddialog.cpp:770
 #, kde-format
 msgid "Upload Failed"
 msgstr "上傳失敗"
 
 #: uploaddialog.cpp:574
 #, kde-format
 msgid ""
 "The server does not recognize the category %2 to which you are trying to "
 "upload."
 msgid_plural ""
 "The server does not recognize any of the categories to which you are trying "
 "to upload: %2"
 msgstr[0] "伺服器無法辨識出您要上傳到哪個類別：%2"
 
 #: uploaddialog.cpp:577
 #, kde-format
 msgid "Error"
 msgstr "錯誤"
 
 #: uploaddialog.cpp:621
 #, kde-format
 msgid "The selected category \"%1\" is invalid."
 msgstr "選取的類別 %1 不合法"
 
 #: uploaddialog.cpp:670 uploaddialog.cpp:685 uploaddialog.cpp:699
 #, kde-format
 msgid "Select preview image"
 msgstr "選擇預覽影像"
 
 #: uploaddialog.cpp:714
 #, kde-format
 msgid "There was a network error."
 msgstr "發生網路錯誤。"
 
 #: uploaddialog.cpp:714 uploaddialog.cpp:719
 #, kde-format
 msgid "Uploading Failed"
 msgstr "上傳失敗"
 
 #: uploaddialog.cpp:719
 #, kde-format
 msgid "Authentication error."
 msgstr "認證錯誤。"
 
 #: uploaddialog.cpp:729
 #, kde-format
 msgid "Upload failed: %1"
 msgstr "上傳失敗：%1"
 
 #. i18n: ectx: property (text), widget (QLabel, label_11)
 #: uploaddialog.ui:89
 #, kde-format
 msgid "Password:"
 msgstr "密碼："
 
 #. i18n: ectx: property (text), widget (QLabel, label_10)
 #: uploaddialog.ui:105
 #, kde-format
 msgid "Username:"
 msgstr "使用者名稱："
 
 #. i18n: ectx: property (text), widget (QLabel, uploadFileLabel)
 #: uploaddialog.ui:148
 #, kde-format
 msgid "File to upload:"
 msgstr "要上傳的檔案；"
 
 #. i18n: ectx: property (text), widget (QRadioButton, radioNewUpload)
 #: uploaddialog.ui:158
 #, kde-format
 msgid "New Upload"
 msgstr "新增上傳"
 
 #. i18n: ectx: property (text), item, widget (KComboBox, mLicenseCombo)
 #: uploaddialog.ui:196
 #, kde-format
 msgid "GPL"
 msgstr "GPL"
 
 #. i18n: ectx: property (text), item, widget (KComboBox, mLicenseCombo)
 #: uploaddialog.ui:201
 #, kde-format
 msgid "LGPL"
 msgstr "LGPL"
 
 #. i18n: ectx: property (text), item, widget (KComboBox, mLicenseCombo)
 #: uploaddialog.ui:206
 #, kde-format
 msgid "BSD"
 msgstr "BSD"
 
 #. i18n: ectx: property (text), widget (QLabel, label_8)
 #: uploaddialog.ui:214
 #, kde-format
 msgid "Description:"
 msgstr "描述："
 
 #. i18n: ectx: property (text), widget (QLabel, label_5)
 #: uploaddialog.ui:240
 #, kde-format
 msgid "Version:"
 msgstr "版本："
 
 #. i18n: ectx: property (text), widget (QLabel, label_6)
 #: uploaddialog.ui:253
 #, kde-format
 msgid "License:"
 msgstr "授權："
 
 #. i18n: ectx: property (text), widget (QLabel, label_12)
 #: uploaddialog.ui:266
 #, kde-format
 msgid "Please fill out the information about your upload in English."
 msgstr "請用英文填寫您的上傳檔的資訊。"
 
 #. i18n: ectx: property (text), widget (QLabel, label_4)
 #: uploaddialog.ui:282
 #, kde-format
 msgid "Title:"
 msgstr "標題："
 
 #. i18n: ectx: property (toolTip), widget (QLineEdit, mNameEdit)
 #: uploaddialog.ui:317
 #, kde-format
 msgid "Name of the file as it will appear on the website"
 msgstr "出現在網站上的檔名"
 
 #. i18n: ectx: property (whatsThis), widget (QLineEdit, mNameEdit)
 #: uploaddialog.ui:320
 #, kde-format
 msgid ""
 "This should clearly describe the file content. It can be the same text as "
 "the title of the kvtml file."
 msgstr "應該要能清楚描述檔案的內容。它可以跟 kvtml 檔的標題一樣。"
 
 #. i18n: ectx: property (title), widget (QGroupBox, groupBox_2)
 #: uploaddialog.ui:334
 #, kde-format
 msgid "Preview Images"
 msgstr "預覽影像"
 
 #. i18n: ectx: property (text), widget (QPushButton, changePreview1Button)
 #. i18n: ectx: property (text), widget (QPushButton, changePreview3Button)
 #. i18n: ectx: property (text), widget (QPushButton, changePreview2Button)
 #: uploaddialog.ui:343 uploaddialog.ui:350 uploaddialog.ui:357
 #, kde-format
 msgid "Select Preview..."
 msgstr "選擇預覽..."
 
 #. i18n: ectx: property (text), widget (QCheckBox, priceCheckBox)
 #: uploaddialog.ui:433
 #, kde-format
 msgid "Set a price for this item"
 msgstr "對此項目設定價格"
 
 #. i18n: ectx: property (title), widget (QGroupBox, priceGroupBox)
 #: uploaddialog.ui:443
 #, kde-format
 msgid "Price"
 msgstr "價格"
 
 #. i18n: ectx: property (text), widget (QLabel, priceLabel)
 #: uploaddialog.ui:452
 #, kde-format
 msgid "Price:"
 msgstr "價格："
 
 #. i18n: ectx: property (text), widget (QLabel, priceReasonLabel)
 #: uploaddialog.ui:479
 #, kde-format
 msgid "Reason for price:"
 msgstr "設定價格的理由："
 
 #. i18n: ectx: property (text), widget (QLabel, contentWebsiteLinkLabel)
 #: uploaddialog.ui:596
 #, kde-format
 msgid "Fetch content link from server"
 msgstr "從伺服器上抓取內容連結"
 
 #. i18n: ectx: property (text), widget (QLabel, creatingContentLabel)
 #: uploaddialog.ui:609
 #, kde-format
 msgid "Create content on server"
 msgstr "在伺服器上建立內容"
 
 #. i18n: ectx: property (text), widget (QLabel, creatingContentLabel_2)
 #: uploaddialog.ui:622
 #, kde-format
 msgid "Upload content"
 msgstr "上傳內容"
 
 #. i18n: ectx: property (text), widget (QLabel, uploadPreview1Label)
 #: uploaddialog.ui:635
 #, kde-format
 msgid "Upload first preview"
 msgstr "上傳第一個預覽"
 
 #. i18n: ectx: property (text), widget (QLabel, label_2)
 #: uploaddialog.ui:665
 #, kde-format
 msgid "Note: You can edit, update and delete your content on the website."
 msgstr "注意：您可以編輯、更新與刪除網站上您的內容。"
 
 #. i18n: ectx: property (text), widget (QLabel, uploadPreview2Label)
 #: uploaddialog.ui:681
 #, kde-format
 msgid "Upload second preview"
 msgstr "上傳第二個預覽"
 
 #. i18n: ectx: property (text), widget (QLabel, uploadPreview3Label)
 #: uploaddialog.ui:694
 #, kde-format
 msgid "Upload third preview"
 msgstr "上傳第三個預覽"
 
 #. i18n: ectx: property (text), widget (QLabel, label)
 #: uploaddialog.ui:739
 #, kde-format
 msgid ""
 "I ensure that this content does not violate any existing copyright, law or "
 "trademark. I agree for my IP address to be logged. (Distributing content "
 "without the permission of the copyright holder is illegal.)"
 msgstr ""
 "我確定此內容並未違反任何現有的授權、法律或商標。我同意我的 IP 位址被紀錄。"
 "（未經版權持有者同意即散布內容是違法的。）"
 
 #. i18n: ectx: property (text), widget (QPushButton, uploadButton)
 #: uploaddialog.ui:764
 #, kde-format
 msgid "Start Upload"
 msgstr "開始上傳"
Index: trunk/l10n-kf5/zh_TW/messages/kde-workspace/libdiscover.po
===================================================================
--- trunk/l10n-kf5/zh_TW/messages/kde-workspace/libdiscover.po	(revision 1537713)
+++ trunk/l10n-kf5/zh_TW/messages/kde-workspace/libdiscover.po	(revision 1537714)
@@ -1,1610 +1,1610 @@
 # Copyright (C) YEAR This_file_is_part_of_KDE
 # This file is distributed under the same license as the PACKAGE package.
 #
 # Franklin Weng <franklin@goodhorse.idv.tw>, 2010, 2011, 2012, 2013, 2014, 2015.
 # Jeff Huang <s8321414@gmail.com>, 2016, 2017.
 # pan93412 <pan93412@gmail.com>, 2018, 2019.
 # Franklin Weng <franklin at goodhorse dot idv dot tw>, 2010.
 msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: http://bugs.kde.org\n"
 "POT-Creation-Date: 2019-03-19 03:39+0100\n"
-"PO-Revision-Date: 2019-03-14 20:48+0800\n"
+"PO-Revision-Date: 2019-03-19 19:28+0800\n"
 "Last-Translator: pan93412 <pan93412@gmail.com>\n"
 "Language-Team: Chinese <zh-l10n@linux.org.tw>\n"
 "Language: zh_TW\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=1; plural=0;\n"
 "X-Generator: Lokalize 18.12.3\n"
 
 #: categoriesxml.cpp:2 categoriesxml.cpp:114 categoriesxml.cpp:220
 #: libdiscover/backends/FlatpakBackend/flatpak-backend-categories.xml:5
 #: libdiscover/backends/PackageKitBackend/packagekit-backend-categories.xml:5
 #: libdiscover/backends/SnapBackend/snap-backend-categories.xml:5
 #, kde-format
 msgctxt "Category"
 msgid "Applications"
 msgstr "應用程式"
 
 #: categoriesxml.cpp:4 categoriesxml.cpp:116
 #: libdiscover/backends/FlatpakBackend/flatpak-backend-categories.xml:14
 #: libdiscover/backends/PackageKitBackend/packagekit-backend-categories.xml:14
 #, kde-format
 msgctxt "Category"
 msgid "Accessories"
 msgstr "附屬應用程式"
 
 #: categoriesxml.cpp:6 categoriesxml.cpp:118
 #: libdiscover/backends/FlatpakBackend/flatpak-backend-categories.xml:26
 #: libdiscover/backends/PackageKitBackend/packagekit-backend-categories.xml:26
 #, kde-format
 msgctxt "Category"
 msgid "Accessibility"
 msgstr "無障礙輔助"
 
 #: categoriesxml.cpp:8 categoriesxml.cpp:120
 #: libdiscover/backends/FlatpakBackend/flatpak-backend-categories.xml:38
 #: libdiscover/backends/PackageKitBackend/packagekit-backend-categories.xml:38
 #, kde-format
 msgctxt "Category"
 msgid "Developer Tools"
 msgstr "程式開發工具"
 
 #: categoriesxml.cpp:10 categoriesxml.cpp:122
 #: libdiscover/backends/FlatpakBackend/flatpak-backend-categories.xml:48
 #: libdiscover/backends/PackageKitBackend/packagekit-backend-categories.xml:48
 #, kde-format
 msgctxt "Category"
 msgid "Debugging"
 msgstr "除錯"
 
 #: categoriesxml.cpp:12 categoriesxml.cpp:124
 #: libdiscover/backends/FlatpakBackend/flatpak-backend-categories.xml:58
 #: libdiscover/backends/PackageKitBackend/packagekit-backend-categories.xml:58
 #, kde-format
 msgctxt "Category"
 msgid "Graphic Interface Design"
 msgstr "圖形介面設計"
 
 #: categoriesxml.cpp:14 categoriesxml.cpp:126
 #: libdiscover/backends/FlatpakBackend/flatpak-backend-categories.xml:67
 #: libdiscover/backends/PackageKitBackend/packagekit-backend-categories.xml:67
 #, kde-format
 msgctxt "Category"
 msgid "IDEs"
 msgstr "整合開發環境"
 
 #: categoriesxml.cpp:16 categoriesxml.cpp:128
 #: libdiscover/backends/FlatpakBackend/flatpak-backend-categories.xml:76
 #: libdiscover/backends/PackageKitBackend/packagekit-backend-categories.xml:76
 #, kde-format
 msgctxt "Category"
 msgid "Localization"
 msgstr "本地化"
 
 #: categoriesxml.cpp:18 categoriesxml.cpp:130
 #: libdiscover/backends/FlatpakBackend/flatpak-backend-categories.xml:86
 #: libdiscover/backends/PackageKitBackend/packagekit-backend-categories.xml:86
 #, kde-format
 msgctxt "Category"
 msgid "Profiling"
 msgstr "效能測試"
 
 #: categoriesxml.cpp:20 categoriesxml.cpp:132
 #: libdiscover/backends/FlatpakBackend/flatpak-backend-categories.xml:95
 #: libdiscover/backends/PackageKitBackend/packagekit-backend-categories.xml:95
 #, kde-format
 msgctxt "Category"
 msgid "Web Development"
 msgstr "網頁開發"
 
 #: categoriesxml.cpp:22 categoriesxml.cpp:134
 #: libdiscover/backends/FlatpakBackend/flatpak-backend-categories.xml:108
 #: libdiscover/backends/PackageKitBackend/packagekit-backend-categories.xml:108
 #, kde-format
 msgctxt "Category"
 msgid "Education"
 msgstr "教育"
 
 #: categoriesxml.cpp:24 categoriesxml.cpp:136
 #: libdiscover/backends/FlatpakBackend/flatpak-backend-categories.xml:120
 #: libdiscover/backends/PackageKitBackend/packagekit-backend-categories.xml:120
 #, kde-format
 msgctxt "Category"
 msgid "Science and Engineering"
 msgstr "科學與工程"
 
 #: categoriesxml.cpp:26 categoriesxml.cpp:138
 #: libdiscover/backends/FlatpakBackend/flatpak-backend-categories.xml:130
 #: libdiscover/backends/PackageKitBackend/packagekit-backend-categories.xml:130
 #, kde-format
 msgctxt "Category"
 msgid "Astronomy"
 msgstr "天文學"
 
 #: categoriesxml.cpp:28 categoriesxml.cpp:140
 #: libdiscover/backends/FlatpakBackend/flatpak-backend-categories.xml:138
 #: libdiscover/backends/PackageKitBackend/packagekit-backend-categories.xml:138
 #, kde-format
 msgctxt "Category"
 msgid "Biology"
 msgstr "生物學"
 
 #: categoriesxml.cpp:30 categoriesxml.cpp:142
 #: libdiscover/backends/FlatpakBackend/flatpak-backend-categories.xml:146
 #: libdiscover/backends/PackageKitBackend/packagekit-backend-categories.xml:146
 #, kde-format
 msgctxt "Category"
 msgid "Chemistry"
 msgstr "化學"
 
 #: categoriesxml.cpp:32 categoriesxml.cpp:144
 #: libdiscover/backends/FlatpakBackend/flatpak-backend-categories.xml:155
 #: libdiscover/backends/PackageKitBackend/packagekit-backend-categories.xml:155
 #, kde-format
 msgctxt "Category"
 msgid "Computer Science and Robotics"
 msgstr "電腦科學與機器人學"
 
 #: categoriesxml.cpp:34 categoriesxml.cpp:146
 #: libdiscover/backends/FlatpakBackend/flatpak-backend-categories.xml:166
 #: libdiscover/backends/PackageKitBackend/packagekit-backend-categories.xml:166
 #, kde-format
 msgctxt "Category"
 msgid "Electronics"
 msgstr "電子學"
 
 #: categoriesxml.cpp:36 categoriesxml.cpp:148
 #: libdiscover/backends/FlatpakBackend/flatpak-backend-categories.xml:175
 #: libdiscover/backends/PackageKitBackend/packagekit-backend-categories.xml:175
 #, kde-format
 msgctxt "Category"
 msgid "Engineering"
 msgstr "工程計算"
 
 #: categoriesxml.cpp:38 categoriesxml.cpp:150
 #: libdiscover/backends/FlatpakBackend/flatpak-backend-categories.xml:184
 #: libdiscover/backends/PackageKitBackend/packagekit-backend-categories.xml:184
 #, kde-format
 msgctxt "Category"
 msgid "Geography"
 msgstr "地理"
 
 #: categoriesxml.cpp:40 categoriesxml.cpp:152
 #: libdiscover/backends/FlatpakBackend/flatpak-backend-categories.xml:192
 #: libdiscover/backends/PackageKitBackend/packagekit-backend-categories.xml:192
 #, kde-format
 msgctxt "Category"
 msgid "Geology"
 msgstr "地質學"
 
 #: categoriesxml.cpp:42 categoriesxml.cpp:154
 #: libdiscover/backends/FlatpakBackend/flatpak-backend-categories.xml:201
 #: libdiscover/backends/PackageKitBackend/packagekit-backend-categories.xml:201
 #, kde-format
 msgctxt "Category"
 msgid "Mathematics"
 msgstr "數學"
 
 #: categoriesxml.cpp:44 categoriesxml.cpp:156
 #: libdiscover/backends/FlatpakBackend/flatpak-backend-categories.xml:212
 #: libdiscover/backends/PackageKitBackend/packagekit-backend-categories.xml:212
 #, kde-format
 msgctxt "Category"
 msgid "Physics"
 msgstr "物理屬性"
 
 #: categoriesxml.cpp:46 categoriesxml.cpp:158
 #: libdiscover/backends/FlatpakBackend/flatpak-backend-categories.xml:223
 #: libdiscover/backends/PackageKitBackend/packagekit-backend-categories.xml:223
 #, kde-format
 msgctxt "Category"
 msgid "Games"
 msgstr "遊戲"
 
 #: categoriesxml.cpp:48 categoriesxml.cpp:160
 #: libdiscover/backends/FlatpakBackend/flatpak-backend-categories.xml:233
 #: libdiscover/backends/PackageKitBackend/packagekit-backend-categories.xml:233
 #, kde-format
 msgctxt "Category"
 msgid "Arcade"
 msgstr "大型遊戲機遊戲"
 
 #: categoriesxml.cpp:50 categoriesxml.cpp:162
 #: libdiscover/backends/FlatpakBackend/flatpak-backend-categories.xml:242
 #: libdiscover/backends/PackageKitBackend/packagekit-backend-categories.xml:242
 #, kde-format
 msgctxt "Category"
 msgid "Board Games"
 msgstr "棋盤遊戲"
 
 #: categoriesxml.cpp:52 categoriesxml.cpp:164
 #: libdiscover/backends/FlatpakBackend/flatpak-backend-categories.xml:251
 #: libdiscover/backends/PackageKitBackend/packagekit-backend-categories.xml:251
 #, kde-format
 msgctxt "Category"
 msgid "Card Games"
 msgstr "紙牌遊戲"
 
 #: categoriesxml.cpp:54 categoriesxml.cpp:166
 #: libdiscover/backends/FlatpakBackend/flatpak-backend-categories.xml:260
 #: libdiscover/backends/PackageKitBackend/packagekit-backend-categories.xml:260
 #, kde-format
 msgctxt "Category"
 msgid "Puzzles"
 msgstr "解謎遊戲"
 
 #: categoriesxml.cpp:56 categoriesxml.cpp:168
 #: libdiscover/backends/FlatpakBackend/flatpak-backend-categories.xml:269
 #: libdiscover/backends/PackageKitBackend/packagekit-backend-categories.xml:269
 #, kde-format
 msgctxt "Category"
 msgid "Role Playing"
 msgstr "角色扮演"
 
 #: categoriesxml.cpp:58 categoriesxml.cpp:170
 #: libdiscover/backends/FlatpakBackend/flatpak-backend-categories.xml:278
 #: libdiscover/backends/PackageKitBackend/packagekit-backend-categories.xml:278
 #, kde-format
 msgctxt "Category"
 msgid "Simulation"
 msgstr "模擬"
 
 #: categoriesxml.cpp:60 categoriesxml.cpp:172
 #: libdiscover/backends/FlatpakBackend/flatpak-backend-categories.xml:287
 #: libdiscover/backends/PackageKitBackend/packagekit-backend-categories.xml:287
 #, kde-format
 msgctxt "Category"
 msgid "Strategy"
 msgstr "策略"
 
 #: categoriesxml.cpp:62 categoriesxml.cpp:174
 #: libdiscover/backends/FlatpakBackend/flatpak-backend-categories.xml:296
 #: libdiscover/backends/PackageKitBackend/packagekit-backend-categories.xml:296
 #, kde-format
 msgctxt "Category"
 msgid "Sports"
 msgstr "運動"
 
 #: categoriesxml.cpp:64 categoriesxml.cpp:176
 #: libdiscover/backends/FlatpakBackend/flatpak-backend-categories.xml:305
 #: libdiscover/backends/PackageKitBackend/packagekit-backend-categories.xml:305
 #, kde-format
 msgctxt "Category"
 msgid "Action"
 msgstr "動作"
 
 #: categoriesxml.cpp:66 categoriesxml.cpp:178
 #: libdiscover/backends/FlatpakBackend/flatpak-backend-categories.xml:314
 #: libdiscover/backends/PackageKitBackend/packagekit-backend-categories.xml:314
 #, kde-format
 msgctxt "Category"
 msgid "Emulators"
 msgstr "模擬器"
 
 #: categoriesxml.cpp:68 categoriesxml.cpp:180
 #: libdiscover/backends/FlatpakBackend/flatpak-backend-categories.xml:327
 #: libdiscover/backends/PackageKitBackend/packagekit-backend-categories.xml:327
 #, kde-format
 msgctxt "Category"
 msgid "Graphics"
 msgstr "美工繪圖"
 
 #: categoriesxml.cpp:70 categoriesxml.cpp:182
 #: libdiscover/backends/FlatpakBackend/flatpak-backend-categories.xml:336
 #: libdiscover/backends/PackageKitBackend/packagekit-backend-categories.xml:336
 #, kde-format
 msgctxt "Category"
 msgid "3D"
 msgstr "立體"
 
 #: categoriesxml.cpp:72 categoriesxml.cpp:184
 #: libdiscover/backends/FlatpakBackend/flatpak-backend-categories.xml:344
 #: libdiscover/backends/PackageKitBackend/packagekit-backend-categories.xml:344
 #, kde-format
 msgctxt "Category"
 msgid "Drawing"
 msgstr "繪圖"
 
 #: categoriesxml.cpp:74 categoriesxml.cpp:186
 #: libdiscover/backends/FlatpakBackend/flatpak-backend-categories.xml:356
 #: libdiscover/backends/PackageKitBackend/packagekit-backend-categories.xml:356
 #, kde-format
 msgctxt "Category"
 msgid "Painting and Editing"
 msgstr "繪圖與編輯"
 
 #: categoriesxml.cpp:76 categoriesxml.cpp:188
 #: libdiscover/backends/FlatpakBackend/flatpak-backend-categories.xml:369
 #: libdiscover/backends/PackageKitBackend/packagekit-backend-categories.xml:369
 #, kde-format
 msgctxt "Category"
 msgid "Photography"
 msgstr "攝影"
 
 #: categoriesxml.cpp:78 categoriesxml.cpp:190
 #: libdiscover/backends/FlatpakBackend/flatpak-backend-categories.xml:378
 #: libdiscover/backends/PackageKitBackend/packagekit-backend-categories.xml:378
 #, kde-format
 msgctxt "Category"
 msgid "Publishing"
 msgstr "出版"
 
 #: categoriesxml.cpp:80 categoriesxml.cpp:192
 #: libdiscover/backends/FlatpakBackend/flatpak-backend-categories.xml:387
 #: libdiscover/backends/PackageKitBackend/packagekit-backend-categories.xml:387
 #, kde-format
 msgctxt "Category"
 msgid "Scanning and OCR"
 msgstr "掃描與光學辨識"
 
 #: categoriesxml.cpp:82 categoriesxml.cpp:194
 #: libdiscover/backends/FlatpakBackend/flatpak-backend-categories.xml:397
 #: libdiscover/backends/PackageKitBackend/packagekit-backend-categories.xml:397
 #, kde-format
 msgctxt "Category"
 msgid "Viewers"
 msgstr "檢視器"
 
 #: categoriesxml.cpp:84 categoriesxml.cpp:196
 #: libdiscover/backends/FlatpakBackend/flatpak-backend-categories.xml:409
 #: libdiscover/backends/PackageKitBackend/packagekit-backend-categories.xml:409
 #, kde-format
 msgctxt "Category"
 msgid "Internet"
 msgstr "網際網路"
 
 #: categoriesxml.cpp:86 categoriesxml.cpp:198
 #: libdiscover/backends/FlatpakBackend/flatpak-backend-categories.xml:418
 #: libdiscover/backends/PackageKitBackend/packagekit-backend-categories.xml:418
 #, kde-format
 msgctxt "Category"
 msgid "Chat"
 msgstr "聊天"
 
 #: categoriesxml.cpp:88 categoriesxml.cpp:200
 #: libdiscover/backends/FlatpakBackend/flatpak-backend-categories.xml:428
 #: libdiscover/backends/PackageKitBackend/packagekit-backend-categories.xml:428
 #, kde-format
 msgctxt "Category"
 msgid "File Sharing"
 msgstr "檔案分享"
 
 #: categoriesxml.cpp:90 categoriesxml.cpp:202
 #: libdiscover/backends/FlatpakBackend/flatpak-backend-categories.xml:437
 #: libdiscover/backends/PackageKitBackend/packagekit-backend-categories.xml:437
 #, kde-format
 msgctxt "Category"
 msgid "Mail"
 msgstr "郵件"
 
 #: categoriesxml.cpp:92 categoriesxml.cpp:204
 #: libdiscover/backends/FlatpakBackend/flatpak-backend-categories.xml:446
 #: libdiscover/backends/PackageKitBackend/packagekit-backend-categories.xml:446
 #, kde-format
 msgctxt "Category"
 msgid "Web Browsers"
 msgstr "網頁伺服器"
 
 #: categoriesxml.cpp:94 categoriesxml.cpp:206
 #: libdiscover/backends/FlatpakBackend/flatpak-backend-categories.xml:458
 #: libdiscover/backends/PackageKitBackend/packagekit-backend-categories.xml:458
 #, kde-format
 msgctxt "Category"
 msgid "Multimedia"
 msgstr "多媒體"
 
 #: categoriesxml.cpp:96 categoriesxml.cpp:208
 #: libdiscover/backends/FlatpakBackend/flatpak-backend-categories.xml:468
 #: libdiscover/backends/PackageKitBackend/packagekit-backend-categories.xml:468
 #, kde-format
 msgctxt "Category"
 msgid "Audio and Video Editors"
 msgstr "音訊與視訊編輯器"
 
 #: categoriesxml.cpp:98 categoriesxml.cpp:210
 #: libdiscover/backends/FlatpakBackend/flatpak-backend-categories.xml:477
 #: libdiscover/backends/PackageKitBackend/packagekit-backend-categories.xml:477
 #, kde-format
 msgctxt "Category"
 msgid "Audio Players"
 msgstr "音樂播放器"
 
 #: categoriesxml.cpp:100 categoriesxml.cpp:212
 #: libdiscover/backends/FlatpakBackend/flatpak-backend-categories.xml:498
 #: libdiscover/backends/PackageKitBackend/packagekit-backend-categories.xml:498
 #, kde-format
 msgctxt "Category"
 msgid "Video Players"
 msgstr "影片播放器"
 
 #: categoriesxml.cpp:102 categoriesxml.cpp:214
 #: libdiscover/backends/FlatpakBackend/flatpak-backend-categories.xml:516
 #: libdiscover/backends/PackageKitBackend/packagekit-backend-categories.xml:516
 #, kde-format
 msgctxt "Category"
 msgid "CD and DVD"
 msgstr "CD 與 DVD"
 
 #: categoriesxml.cpp:104 categoriesxml.cpp:216
 #: libdiscover/backends/FlatpakBackend/flatpak-backend-categories.xml:528
 #: libdiscover/backends/PackageKitBackend/packagekit-backend-categories.xml:528
 #, kde-format
 msgctxt "Category"
 msgid "Office"
 msgstr "辦公軟體"
 
 #: categoriesxml.cpp:106 categoriesxml.cpp:218
 #: libdiscover/backends/FlatpakBackend/flatpak-backend-categories.xml:539
 #: libdiscover/backends/PackageKitBackend/packagekit-backend-categories.xml:539
 #, kde-format
 msgctxt "Category"
 msgid "System Settings"
 msgstr "系統設定"
 
 #: categoriesxml.cpp:108
 #: libdiscover/backends/PackageKitBackend/packagekit-backend-categories.xml:552
 #, kde-format
 msgctxt "Category"
 msgid "Plasma Addons"
 msgstr "Plasma 外加功能"
 
 #: categoriesxml.cpp:110
 #: libdiscover/backends/PackageKitBackend/packagekit-backend-categories.xml:563
 #, kde-format
 msgctxt "Category"
 msgid "Plasma Widgets"
 msgstr "Plasma 元件"
 
 #: categoriesxml.cpp:112
 #: libdiscover/backends/PackageKitBackend/packagekit-backend-categories.xml:575
 #, kde-format
 msgctxt "Category"
 msgid "Fonts"
 msgstr "字型"
 
 #: categoriesxml.cpp:222
 #: libdiscover/backends/DummyBackend/dummy-backend-categories.xml:4
 #, kde-format
 msgctxt "Category"
 msgid "Dummy Category"
 msgstr "假類別："
 
 #: categoriesxml.cpp:224
 #: libdiscover/backends/DummyBackend/dummy-backend-categories.xml:10
 #, kde-format
 msgctxt "Category"
 msgid "dummy"
 msgstr "測試用"
 
 #: categoriesxml.cpp:226
 #: libdiscover/backends/DummyBackend/dummy-backend-categories.xml:18
 #, kde-format
 msgctxt "Category"
 msgid "dummy addons"
 msgstr "測試用外加功能"
 
 #: categoriesxml.cpp:228
 #: libdiscover/backends/DummyBackend/dummy-backend-categories.xml:27
 #, kde-format
 msgctxt "Category"
 msgid "dummy 1"
 msgstr "測試用 1"
 
 #: categoriesxml.cpp:230
 #: libdiscover/backends/DummyBackend/dummy-backend-categories.xml:35
 #, kde-format
 msgctxt "Category"
 msgid "dummy with stuff"
 msgstr "測試用，加上一些東西"
 
 #: categoriesxml.cpp:232 categoriesxml.cpp:236
 #: libdiscover/backends/DummyBackend/dummy-backend-categories.xml:42
 #: libdiscover/backends/DummyBackend/dummy-backend-categories.xml:57
 #, kde-format
 msgctxt "Category"
 msgid "dummy 2.1"
 msgstr "測試用 2.1"
 
 #: categoriesxml.cpp:234
 #: libdiscover/backends/DummyBackend/dummy-backend-categories.xml:50
 #, kde-format
 msgctxt "Category"
 msgid "dummy with quite some stuff"
 msgstr "測試用，加上更多東西"
 
 #: categoriesxml.cpp:238
 #: libdiscover/backends/DummyBackend/dummy-backend-categories.xml:66
 #, kde-format
 msgctxt "Category"
 msgid "dummy 3"
 msgstr "測試用 3"
 
 #: categoriesxml.cpp:240
 #: libdiscover/backends/DummyBackend/dummy-backend-categories.xml:76
 #, kde-format
 msgctxt "Category"
 msgid "dummy 4"
 msgstr "測試用 4"
 
 #: libdiscover/appstream/OdrsReviewsBackend.cpp:251
 #: libdiscover/backends/FlatpakBackend/FlatpakResource.cpp:114
 #, kde-format
 msgid "%1 (%2)"
 msgstr "%1 (%2)"
 
 #: libdiscover/backends/FlatpakBackend/FlatpakBackend.cpp:373
 #, kde-format
 msgid "Local bundle"
 msgstr "本機 Bundle"
 
 #: libdiscover/backends/FlatpakBackend/FlatpakBackend.cpp:1178
 #: libdiscover/backends/PackageKitBackend/PackageKitBackend.cpp:462
 #: libdiscover/backends/PackageKitBackend/PackageKitBackend.cpp:476
 #, kde-format
 msgid "Malformed appstream url '%1'"
 msgstr "不正確的 appstream 網址 '%1'"
 
 #: libdiscover/backends/FlatpakBackend/FlatpakResource.cpp:109
 #: libdiscover/backends/FlatpakBackend/FlatpakResource.cpp:238
 #: libdiscover/backends/PackageKitBackend/PackageKitResource.cpp:108
 #, kde-format
 msgid "Unknown"
 msgstr "未知"
 
 #: libdiscover/backends/FlatpakBackend/FlatpakResource.cpp:365
 #: libdiscover/backends/FlatpakBackend/FlatpakResource.cpp:373
 #, kde-format
 msgid "Retrieving size information"
 msgstr "正在取得大小資訊"
 
 #: libdiscover/backends/FlatpakBackend/FlatpakResource.cpp:367
 #: libdiscover/backends/FlatpakBackend/FlatpakResource.cpp:375
 #, kde-format
 msgid "Unknown size"
 msgstr "未知的大小"
 
 #: libdiscover/backends/FlatpakBackend/FlatpakResource.cpp:369
 #, kde-format
 msgctxt "@info app size"
 msgid "%1 to download, %2 on disk"
 msgstr "%1 個準備下載，%2 個在磁碟中"
 
 #: libdiscover/backends/FlatpakBackend/FlatpakResource.cpp:377
 #, kde-format
 msgctxt "@info app size"
 msgid "%1 on disk"
 msgstr "%1 個在磁碟中"
 
 #: libdiscover/backends/FlatpakBackend/FlatpakSourcesBackend.cpp:53
 #, kde-format
 msgid "Add Flathub"
 msgstr "新增 Flathub"
 
 #: libdiscover/backends/FlatpakBackend/FlatpakSourcesBackend.cpp:103
 #: libdiscover/backends/FlatpakBackend/FlatpakSourcesBackend.cpp:114
 #, kde-format
 msgid "Could not add the source %1"
 msgstr "無法增加來源 %1"
 
 #: libdiscover/backends/FlatpakBackend/FlatpakSourcesBackend.cpp:297
 #, kde-format
 msgid "Flatpak repository URI (*.flatpakrepo)"
 msgstr "Flatpak 軟體庫連結 (*.flatpakrepo)"
 
 #: libdiscover/backends/FlatpakBackend/FlatpakTransactionThread.cpp:40
 #, kde-format
 msgid "Adding remote '%1' in %2 from %3"
 msgstr "正在增加來自 %3 的 %2 中「%1」遠端位置"
 
 #: libdiscover/backends/FwupdBackend/FwupdSourcesBackend.cpp:123
 #: libdiscover/backends/PackageKitBackend/PackageKitUpdater.cpp:328
 #: libdiscover/backends/PackageKitBackend/PKTransaction.cpp:263
 #, kde-format
 msgid "Accept EULA"
 msgstr "接受 EULA"
 
 #: libdiscover/backends/FwupdBackend/FwupdSourcesBackend.cpp:123
 #, kde-format
 msgid ""
 "The remote %1 require that you accept their license:\n"
 " %2"
 msgstr ""
 "遠端 %1 要求您接受他們的條款：\n"
 "%2"
 
 #: libdiscover/backends/KNSBackend/KNSBackend.cpp:132
 #, kde-format
 msgid "Backend %1 took too long to initialize"
 msgstr "後端 %1 初始過久"
 
 #: libdiscover/backends/KNSBackend/KNSBackend.cpp:159
-#, fuzzy, kde-format
+#, kde-format
 #| msgctxt "Category"
 #| msgid "Applications"
 msgid "Applications"
 msgstr "應用程式"
 
 #: libdiscover/backends/KNSBackend/KNSBackend.cpp:190
 #, kde-format
 msgid "Plasma Addons"
 msgstr "Plasma 外加功能"
 
 #: libdiscover/backends/KNSBackend/KNSBackend.cpp:190
 #, kde-format
 msgid "Application Addons"
 msgstr "應用程式外加功能"
 
 #: libdiscover/backends/KNSBackend/KNSBackend.cpp:305
 #, kde-format
 msgid "Network error in backend %1: %2"
 msgstr "%1 後端發生網路錯誤：%2"
 
 #: libdiscover/backends/KNSBackend/KNSBackend.cpp:312
 #, kde-format
 msgid ""
 "Too many requests sent to the server for backend %1. Please try again in a "
 "few minutes."
 msgstr "過多請求傳送到後端 %1 的伺服器。請稍候重試。"
 
 #: libdiscover/backends/KNSBackend/KNSBackend.cpp:315
 #: libdiscover/backends/KNSBackend/KNSBackend.cpp:321
 #: libdiscover/backends/KNSBackend/KNSBackend.cpp:326
 #, kde-format
 msgid "Invalid %1 backend, contact your distributor."
 msgstr "無效的 %1 後端，聯絡你的經銷商。"
 
 #: libdiscover/backends/KNSBackend/KNSBackend.cpp:335
 #, kde-format
 msgid "Could not fetch screenshot for the entry %1 in backend %2"
 msgstr "無法在 %2 後端抓取 %1 項目的螢幕截圖"
 
 #: libdiscover/backends/KNSBackend/KNSBackend.cpp:339
 #, kde-format
 msgid "Unhandled error in %1 backend. Contact your distributor."
 msgstr "%1 後端發生無法處理的錯誤。請聯絡發行者。"
 
 #: libdiscover/backends/KNSBackend/KNSBackend.cpp:349
 #, kde-format
 msgid "%1: %2"
 msgstr "%1: %2"
 
 #: libdiscover/backends/KNSBackend/KNSBackend.cpp:518
 #, kde-format
 msgid "Wrong KNewStuff URI: %1"
 msgstr "錯誤的 KNewStuff URI：%1"
 
 #: libdiscover/backends/KNSBackend/KNSResource.cpp:237
 #, kde-format
 msgid "Use"
 msgstr "使用"
 
 #: libdiscover/backends/KNSBackend/KNSReviews.cpp:142
 #, kde-format
 msgid "Log in information for %1"
 msgstr "%1 的登入資訊"
 
 #: libdiscover/backends/PackageKitBackend/AppPackageKitResource.cpp:234
 #, kde-format
 msgid "Cannot launch %1"
 msgstr "無法啟動 %1"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitBackend.cpp:170
 #, kde-format
 msgid "Please make sure that Appstream is properly set up on your system"
 msgstr "請確認 Appstream 已經在您的系統上設定好了"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:34
 #, kde-format
 msgid "Out of memory"
 msgstr "記憶體不足"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:36
 #, kde-format
 msgid "No network connection available"
 msgstr "沒有可用的網路連結"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:38
 #, kde-format
 msgid "Operation not supported"
 msgstr "操作未支援"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:40
 #, kde-format
 msgid "Internal error"
 msgstr "內部錯誤"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:42
 #, kde-format
 msgid "GPG failure"
 msgstr "GPG 失敗"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:44
 #, kde-format
 msgid "PackageID invalid"
 msgstr "PackageID 不合法"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:46
 #, kde-format
 msgid "Package not installed"
 msgstr "軟體包未安裝"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:48
 #, kde-format
 msgid "Package not found"
 msgstr "找不到軟體包"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:50
 #, kde-format
 msgid "Package is already installed"
 msgstr "軟體包已安裝"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:52
 #, kde-format
 msgid "Package download failed"
 msgstr "軟體包下載失敗"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:54
 #, kde-format
 msgid "Package group not found"
 msgstr "找不到軟體包群組"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:56
 #, kde-format
 msgid "Package group list invalid"
 msgstr "軟體包群組清單不合法"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:58
 #, kde-format
 msgid "Dependency resolution failed"
 msgstr "相依性解決失敗"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:60
 #, kde-format
 msgid "Filter invalid"
 msgstr "過濾器不合法"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:62
 #, kde-format
 msgid "Failed while creating a thread"
 msgstr "建立執行緒失敗"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:64
 #, kde-format
 msgid "Transaction failure"
 msgstr "工作階段失敗"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:66
 #, kde-format
 msgid "Transaction canceled"
 msgstr "工作階段取消"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:68
 #, kde-format
 msgid "No Cache available"
 msgstr "沒有快取可使用"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:70
 #, kde-format
 msgid "Cannot find repository"
 msgstr "找不到軟體庫"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:72
 #, kde-format
 msgid "Cannot remove system package"
 msgstr "無法移除系統軟體包"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:74
 #, kde-format
 msgid "The PackageKit daemon has crashed"
 msgstr "PackageKit 伺服程式已崩潰"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:76
 #, kde-format
 msgid "Initialization failure"
 msgstr "初始化失敗"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:78
 #, kde-format
 msgid "Failed to finalize transaction"
 msgstr "工作階段收尾失敗"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:80
 #, kde-format
 msgid "Config parsing failed"
 msgstr "剖析設定失敗"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:82
 #, kde-format
 msgid "Cannot cancel transaction"
 msgstr "無法取消工作階段"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:84
 #, kde-format
 msgid "Cannot obtain lock"
 msgstr "無法取得鎖定"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:86
 #, kde-format
 msgid "No packages to update"
 msgstr "沒有軟體包需要更新"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:88
 #, kde-format
 msgid "Cannot write repo config"
 msgstr "無法寫入軟體庫設定"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:90
 #, kde-format
 msgid "Local install failed"
 msgstr "本地安裝失敗"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:92
 #, kde-format
 msgid "Bad GPG signature found"
 msgstr "找到錯誤的 GPG 簽章"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:94
 #, kde-format
 msgid "No GPG signature found"
 msgstr "找不到 GPG 簽章"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:96
 #, kde-format
 msgid "Cannot install source package"
 msgstr "無法安裝來源軟體包"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:98
 #, kde-format
 msgid "Repo configuration error"
 msgstr "軟體庫設定錯誤"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:100
 #, kde-format
 msgid "No license agreement"
 msgstr "沒有授權宣告"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:102
 #, kde-format
 msgid "File conflicts found"
 msgstr "發現檔案衝突"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:104
 #, kde-format
 msgid "Package conflict found"
 msgstr "發現軟體包衝突"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:106
 #, kde-format
 msgid "Repo not available"
 msgstr "無法使用軟體庫"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:108
 #, kde-format
 msgid "Invalid package file"
 msgstr "無效的軟體包檔案"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:110
 #, kde-format
 msgid "Package install blocked"
 msgstr "軟體包安裝被封鎖"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:112
 #, kde-format
 msgid "Corrupt package found"
 msgstr "發現損毀的軟體包"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:114
 #, kde-format
 msgid "All packages already installed"
 msgstr "已安裝所有軟體包"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:116
 #, kde-format
 msgid "File not found"
 msgstr "找不到檔案"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:118
 #, kde-format
 msgid "No more mirrors available"
 msgstr "沒有其他可用的鏡像站"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:120
 #, kde-format
 msgid "No distro upgrade data"
 msgstr "沒有散布版升級資料"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:122
 #, kde-format
 msgid "Incompatible architecture"
 msgstr "不相容的硬體架構"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:124
 #, kde-format
 msgid "No space on device left"
 msgstr "裝置上已無空間"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:126
 #, kde-format
 msgid "A media change is required"
 msgstr "需要更換媒體"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:128
 #, kde-format
 msgid "You have no authorization to execute this operation"
 msgstr "您沒有權限執行此操作"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:130
 #, kde-format
 msgid "Update not found"
 msgstr "找不到更新"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:132
 #, kde-format
 msgid "Cannot install from unsigned repo"
 msgstr "無法從未簽署的軟體庫進行安裝"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:134
 #, kde-format
 msgid "Cannot update from unsigned repo"
 msgstr "無法從未簽署的軟體庫進行更新"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:136
 #, kde-format
 msgid "Cannot get file list"
 msgstr "無法取得檔案清單"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:138
 #, kde-format
 msgid "Cannot get requires"
 msgstr "無法取得需求"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:140
 #, kde-format
 msgid "Cannot disable repository"
 msgstr "無法關閉主目錄"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:142
 #, kde-format
 msgid "Restricted download detected"
 msgstr "偵測到限制下載"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:144
 #, kde-format
 msgid "Package failed to configure"
 msgstr "軟體包設定失敗"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:146
 #, kde-format
 msgid "Package failed to build"
 msgstr "軟體包建立失敗"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:148
 #, kde-format
 msgid "Package failed to install"
 msgstr "軟體包安裝失敗"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:150
 #, kde-format
 msgid "Package failed to remove"
 msgstr "軟體包移除失敗"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:152
 #, kde-format
 msgid "Update failed due to running process"
 msgstr "由於程序正在執行，因而更新失敗"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:154
 #, kde-format
 msgid "The package database changed"
 msgstr "軟體包資料庫已變更"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:156
 #, kde-format
 msgid "The provided type is not supported"
 msgstr "不支援所提供的型態"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:158
 #, kde-format
 msgid "Install root is invalid"
 msgstr "安裝目錄不合法"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:160
 #, kde-format
 msgctxt ""
 "Failed to sync your Linux distro repositories or other sources of packages"
 msgid "Cannot fetch sources"
 msgstr "無法取得來源"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:162
 #, kde-format
 msgid "Canceled priority"
 msgstr "已取消優先權"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:164
 #, kde-format
 msgid "Unfinished transaction"
 msgstr "未完成的處理事項"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:166
 #, kde-format
 msgid "Lock required"
 msgstr "需要鎖定"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:171
 #, kde-format
 msgid "Unknown error %1."
 msgstr "未知的錯誤 %1."
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:180
 #, kde-format
 msgid "'%1' was changed and suggests to be restarted."
 msgstr "'%1' 已變更，並建議重新啟動。"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:182
 #, kde-format
 msgid "A change by '%1' suggests your session to be restarted."
 msgstr "'%1' 的變更建議您重新啟動。"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:184
 #, kde-format
 msgid ""
 "'%1' was updated for security reasons, a restart of the session is "
 "recommended."
 msgstr "'%1' 已因為安全性理由而更新。建議重新啟動。"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:186
 #, kde-format
 msgid ""
 "'%1' was updated for security reasons, a restart of the system is "
 "recommended."
 msgstr "'%1' 已因為安全性理由而更新。建議重新開機。"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:191
 #, kde-format
 msgid "A change by '%1' suggests your system to be restarted."
 msgstr "由「%1」所作的變更建議您重新開機。"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:199
 #, kde-format
 msgid "The application will have to be restarted."
 msgstr "此應用程式必須重啟。"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:201
 #, kde-format
 msgid "The session will have to be restarted"
 msgstr "工作階段必須重啟。"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:203
 #, kde-format
 msgid "The system will have to be restarted."
 msgstr "系統必須重新啟動。"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:205
 #, kde-format
 msgid "For security, the session will have to be restarted."
 msgstr "為了安全起見，工作階段必須重啟。"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:207
 #, kde-format
 msgid "For security, the system will have to be restarted."
 msgstr "為了安全起見，系統必須重新啟動。"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:219
 #, kde-format
 msgid "Waiting..."
 msgstr "等待中..."
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:221
 #, kde-format
 msgid "Refreshing Cache..."
 msgstr "刷新快取中..."
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:223
 #, kde-format
 msgid "Setup..."
 msgstr "設定..."
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:225
 #, kde-format
 msgid "Processing..."
 msgstr "處理中..."
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:227
 #, kde-format
 msgid "Remove..."
 msgstr "移除..."
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:229
 #, kde-format
 msgid "Downloading..."
 msgstr "下載中..."
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:231
 #, kde-format
 msgid "Installing..."
 msgstr "安裝中..."
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:233
 #, kde-format
 msgid "Updating..."
 msgstr "更新中..."
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:235
 #, kde-format
 msgid "Cleaning up..."
 msgstr "清除中..."
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:238
 #, kde-format
 msgid "Resolving dependencies..."
 msgstr "解決相依性問題中..."
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:240
 #, kde-format
 msgid "Checking signatures..."
 msgstr "檢查簽章中..."
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:242
 #, kde-format
 msgid "Test committing..."
 msgstr "測試提交中..."
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:244
 #, kde-format
 msgid "Committing..."
 msgstr "提交中..."
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:247
 #, kde-format
 msgid "Finished"
 msgstr "已完成"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:249
 #, kde-format
 msgid "Canceled"
 msgstr "已取消"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:251
 #, kde-format
 msgid "Waiting for lock..."
 msgstr "等待鎖定中..."
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:253
 #, kde-format
 msgid "Waiting for authorization..."
 msgstr "等待認證中..."
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:258
 #, kde-format
 msgid "Copying files..."
 msgstr "複製檔案中..."
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:261
 #, kde-format
 msgid "Unknown Status"
 msgstr "未知的狀態"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:269
 #, kde-format
 msgid "We are waiting for something."
 msgstr "正在等待中。"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:271
 #, kde-format
 msgid "Setting up transaction..."
 msgstr "設定工作階段中..."
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:273
 #, kde-format
 msgid "The transaction is currently working..."
 msgstr "工作階段目前進行中..."
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:275
 #, kde-format
 msgid "The transaction is currently removing packages..."
 msgstr "目前正在移除軟體包中..."
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:277
 #, kde-format
 msgid "The transaction is currently downloading packages..."
 msgstr "目前正在下載軟體包中..."
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:279
 #, kde-format
 msgid "The transactions is currently installing packages..."
 msgstr "目前正在安裝軟體包中..."
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:281
 #, kde-format
 msgid "The transaction is currently updating packages..."
 msgstr "目前正在更新軟體包中..."
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:283
 #, kde-format
 msgid "The transaction is currently cleaning up..."
 msgstr "目前正在清除中..."
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:286
 #, kde-format
 msgid ""
 "The transaction is currently resolving the dependencies of the packages it "
 "will install..."
 msgstr "目前正在解決軟體包相依性問題中..."
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:288
 #, kde-format
 msgid "The transaction is currently checking the signatures of the packages..."
 msgstr "目前正在檢查簽章中..."
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:290
 #, kde-format
 msgid ""
 "The transaction is currently testing the commit of this set of packages..."
 msgstr "目前正在測試軟體包集的提交中..."
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:292
 #, kde-format
 msgid "The transaction is currently committing its set of packages..."
 msgstr "目前正在提交軟體包集中..."
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:295
 #, kde-format
 msgid "The transaction has finished!"
 msgstr "此工作階段已完成。"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:297
 #, kde-format
 msgid "The transaction was canceled"
 msgstr "工作階段已取消"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:299
 #, kde-format
 msgid "The transaction is currently waiting for the lock..."
 msgstr "目前正在等待鎖定中..."
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:301
 #, kde-format
 msgid "Waiting for the user to authorize the transaction..."
 msgstr "目前正在等待使用者認證中..."
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:306
 #, kde-format
 msgid "The transaction is currently copying files..."
 msgstr "目前正在複製檔案中..."
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:308
 #, kde-format
 msgid "Currently refreshing the repository cache..."
 msgstr "目前正在刷新軟體庫快取中..."
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:313
 #, kde-format
 msgid "Unknown status %1."
 msgstr "未知的狀態 %1。"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:324
 #, kde-format
 msgctxt "update state"
 msgid "Stable"
 msgstr "穩定"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:326
 #, kde-format
 msgctxt "update state"
 msgid "Unstable"
 msgstr "不穩定版"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitMessages.cpp:328
 #, kde-format
 msgctxt "update state"
 msgid "Testing"
 msgstr "測試中"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitNotifier.cpp:124
 #: libdiscover/backends/PackageKitBackend/PackageKitNotifier.cpp:142
 #, kde-format
 msgid "Offline Updates"
 msgstr "離線更新"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitNotifier.cpp:125
 #, kde-format
 msgid ""
 "Failed to update %1 packages\n"
 "%2"
 msgstr ""
 "下載 %1 軟體包失敗\n"
 "%2"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitNotifier.cpp:134
 #, kde-format
 msgid "Repair Failed"
 msgstr "修復失敗"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitNotifier.cpp:134
 #, kde-format
 msgid "Please report to your distribution: %1"
 msgstr "請回報到您的發行版：%1"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitNotifier.cpp:143
 #, kde-format
 msgid "Successfully updated %1 packages"
 msgstr "順利更新 %1 軟體包"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitResource.cpp:245
 #, kde-format
 msgctxt "package-name (version)"
 msgid "%1 (%2)"
 msgstr "%1 (%2)"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitResource.cpp:247
 #, kde-format
 msgctxt "comma separating package names"
 msgid ", "
 msgstr ", "
 
 #: libdiscover/backends/PackageKitBackend/PackageKitResource.cpp:285
 #, kde-format
 msgid "Obsoletes:"
 msgstr "廢棄："
 
 #: libdiscover/backends/PackageKitBackend/PackageKitResource.cpp:286
 #, kde-format
 msgid "Release Notes:"
 msgstr "發行註記："
 
 #: libdiscover/backends/PackageKitBackend/PackageKitResource.cpp:287
 #, kde-format
 msgid "Update State:"
 msgstr "更新狀態："
 
 #: libdiscover/backends/PackageKitBackend/PackageKitResource.cpp:288
 #, kde-format
 msgid "Restart:"
 msgstr "重新啟動："
 
 #: libdiscover/backends/PackageKitBackend/PackageKitResource.cpp:291
 #, kde-format
 msgid "Vendor:"
 msgstr "廠商："
 
 #: libdiscover/backends/PackageKitBackend/PackageKitResource.cpp:311
 #, kde-format
 msgid "%2 (plus %1 dependency)"
 msgid_plural "%2 (plus %1 dependencies)"
 msgstr[0] "%2 （加上 %1 個依賴庫）"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitSourcesBackend.cpp:103
 #, kde-format
 msgid "Repository URL:"
 msgstr "軟體庫 URL："
 
 #: libdiscover/backends/PackageKitBackend/PackageKitUpdater.cpp:212
 #, kde-format
 msgid "Packages to remove"
 msgstr "個軟體包要移除"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitUpdater.cpp:212
 #, kde-format
 msgid ""
 "The following packages will be removed by the update:\n"
 "<ul><li>%1</li></ul>\n"
 "in order to install:\n"
 "<ul><li>%2</li></ul>"
 msgstr ""
 "下列軟體包將會因更新而移除：\n"
 "<ul><li>%1</li></ul>\n"
 "為了安裝：\n"
 "<ul><li>%2</li></ul>"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitUpdater.cpp:228
 #, kde-format
 msgid "Please restart the computer to finish the update"
 msgstr "重新啟動電腦以完成更新程序"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitUpdater.cpp:315
 #: libdiscover/backends/PackageKitBackend/PKTransaction.cpp:278
 #, kde-format
 msgid ""
 "Media Change of type '%1' is requested.\n"
 "%2"
 msgstr ""
 "要求變更型態 %1 的媒體：\n"
 "%2"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitUpdater.cpp:328
 #: libdiscover/backends/PackageKitBackend/PKTransaction.cpp:263
 #, kde-format
 msgid ""
 "The package %1 and its vendor %2 require that you accept their license:\n"
 " %3"
 msgstr ""
 "軟體包 %1 的提供廠商 %2 要求您接受他們的授權條款：\n"
 "%3"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitUpdater.cpp:422
 #: libdiscover/backends/PackageKitBackend/PKTransaction.cpp:290
 #, kde-format
 msgid "Missing signature for %1 in %2"
 msgstr "在 %2 中缺少對 %1 的簽名"
 
 #: libdiscover/backends/PackageKitBackend/PackageKitUpdater.cpp:423
 #: libdiscover/backends/PackageKitBackend/PKTransaction.cpp:291
 #, kde-format
 msgid ""
 "Do you trust the following key?\n"
 "\n"
 "Url: %1\n"
 "User: %2\n"
 "Key: %3\n"
 "Fingerprint: %4\n"
 "Timestamp: %4\n"
 msgstr ""
 "你確定要信任這個金鑰嗎？\n"
 "\n"
 "連結： %1\n"
 "用戶： %2\n"
 "金鑰： %3\n"
 "指紋： %4\n"
 "時間戳： %4\n"
 
 #: libdiscover/backends/PackageKitBackend/PKTransaction.cpp:180
 #, kde-format
 msgid "Confirm package removal"
 msgstr "確定移除軟體包"
 
 #: libdiscover/backends/PackageKitBackend/PKTransaction.cpp:180
 #, kde-format
 msgid ""
 "This action will also remove the following package:\n"
 "%2"
 msgid_plural ""
 "This action will also remove the following packages:\n"
 "%2"
 msgstr[0] ""
 "這動作也會移除下述的軟體包：\n"
 "%2"
 
 #: libdiscover/backends/SnapBackend/SnapBackend.cpp:50
 #, kde-format
 msgid "Snap"
 msgstr "Snap"
 
 #: libdiscover/backends/SnapBackend/SnapResource.cpp:288
 #, kde-format
 msgid "%1 - %2"
 msgstr "%1 - %2"
 
 #: libdiscover/backends/SnapBackend/SnapTransaction.cpp:61
 #, kde-format
 msgid "This snap application needs security confinement measures disabled."
 msgstr "這個 Snap 程序需要安全性監禁措施被停用。"
 
 #: libdiscover/DiscoverBackendsFactory.cpp:120
 #, kde-format
 msgid ""
 "List all the backends we'll want to have loaded, separated by comma ','."
 msgstr "列出所有要載入的後端介面，以逗號分隔。"
 
 #: libdiscover/resources/AbstractResource.cpp:99
 #, kde-format
 msgid "Broken"
 msgstr "已破損"
 
 #: libdiscover/resources/AbstractResource.cpp:100
 #, kde-format
 msgid "Available"
 msgstr "可使用"
 
 #: libdiscover/resources/AbstractResource.cpp:101
 #, kde-format
 msgid "Installed"
 msgstr "已安裝"
 
 #: libdiscover/resources/AbstractResource.cpp:102
 #, kde-format
 msgid "Upgradeable"
 msgstr "可更新"
 
 #: libdiscover/resources/AbstractResource.cpp:242
 #, kde-format
 msgctxt "origin (backend name)"
 msgid "%1 (%2)"
 msgstr "%1 (%2)"
 
 #: libdiscover/resources/AbstractResource.cpp:247
 #, kde-format
 msgid "Launch"
 msgstr "執行"
 
 #: libdiscover/resources/ResourcesModel.cpp:81
 #, kde-format
 msgctxt "@action Checks the Internet for updates"
 msgid "Check for Updates"
 msgstr "檢查更新"
 
 #: libdiscover/resources/ResourcesUpdatesModel.cpp:108
 #, kde-format
 msgid "Update"
 msgstr "更新"
 
 #: libdiscover/Transaction/Transaction.cpp:148
 #, kde-format
 msgctxt "@label Download rate"
 msgid "%1/s"
 msgstr "%1/s"
 
 #: libdiscover/Transaction/TransactionModel.cpp:88
 #, kde-format
 msgctxt "@info:status"
 msgid "Starting"
 msgstr "啟動中"
 
 #: libdiscover/Transaction/TransactionModel.cpp:90
 #, kde-format
 msgctxt "@info:status"
 msgid "Waiting"
 msgstr "等待中"
 
 #: libdiscover/Transaction/TransactionModel.cpp:92
 #, kde-format
 msgctxt "@info:status"
 msgid "Downloading"
 msgstr "下載中"
 
 #: libdiscover/Transaction/TransactionModel.cpp:96
 #, kde-format
 msgctxt "@info:status"
 msgid "Installing"
 msgstr "安裝中"
 
 #: libdiscover/Transaction/TransactionModel.cpp:98
 #, kde-format
 msgctxt "@info:status"
 msgid "Removing"
 msgstr "移除中"
 
 #: libdiscover/Transaction/TransactionModel.cpp:100
 #, kde-format
 msgctxt "@info:status"
 msgid "Changing Addons"
 msgstr "變更外加功能"
 
 #: libdiscover/Transaction/TransactionModel.cpp:104
 #, kde-format
 msgctxt "@info:status"
 msgid "Done"
 msgstr "完成"
 
 #: libdiscover/Transaction/TransactionModel.cpp:106
 #, kde-format
 msgctxt "@info:status"
 msgid "Failed"
 msgstr "已失敗"
 
 #: libdiscover/Transaction/TransactionModel.cpp:108
 #, kde-format
 msgctxt "@info:status"
 msgid "Cancelled"
 msgstr "已取消"
 
 #: libdiscover/UpdateModel/UpdateModel.cpp:145
 #, kde-format
 msgctxt "@item:inlistbox"
 msgid "Application Updates"
 msgstr "應用程式更新"
 
 #: libdiscover/UpdateModel/UpdateModel.cpp:146
 #, kde-format
 msgctxt "@item:inlistbox"
 msgid "System Updates"
 msgstr "系統更新"
 
 #: libdiscover/UpdateModel/UpdateModel.cpp:147
 #, kde-format
 msgctxt "@item:inlistbox"
 msgid "Addons"
 msgstr "附加功能"
Index: trunk/l10n-kf5/zh_TW/messages/kde-workspace/powerdevil.po
===================================================================
--- trunk/l10n-kf5/zh_TW/messages/kde-workspace/powerdevil.po	(revision 1537713)
+++ trunk/l10n-kf5/zh_TW/messages/kde-workspace/powerdevil.po	(revision 1537714)
@@ -1,528 +1,527 @@
 # Copyright (C) YEAR This_file_is_part_of_KDE
 # This file is distributed under the same license as the PACKAGE package.
 #
 # Franklin Weng <franklin@goodhorse.idv.tw>, 2008, 2010, 2011, 2012, 2013, 2014, 2015.
 # Frank Weng (a.k.a. Franklin) <franklin@goodhorse.idv.tw>, 2009.
 # Jeff Huang <s8321414@gmail.com>, 2016, 2017.
 # Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv dot tw>, 2008, 2009, 2010.
 # Franklin Weng <franklin at goodhorse dot idv dot tw>, 2010.
 # pan93412 <pan93412@gmail.com>, 2019.
 msgid ""
 msgstr ""
 "Project-Id-Version: powerdevil\n"
 "Report-Msgid-Bugs-To: http://bugs.kde.org\n"
 "POT-Creation-Date: 2019-03-19 03:42+0100\n"
-"PO-Revision-Date: 2019-03-02 14:46+0800\n"
+"PO-Revision-Date: 2019-03-19 19:34+0800\n"
 "Last-Translator: pan93412 <pan93412@gmail.com>\n"
 "Language-Team: Chinese <zh-l10n@linux.org.tw>\n"
 "Language: zh_TW\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Lokalize 18.12.2\n"
+"X-Generator: Lokalize 18.12.3\n"
 "Plural-Forms: nplurals=1; plural=0;\n"
 
 #, kde-format
 msgctxt "NAME OF TRANSLATORS"
 msgid "Your names"
 msgstr "Franklin Weng, Jeff Huang"
 
 #, kde-format
 msgctxt "EMAIL OF TRANSLATORS"
 msgid "Your emails"
 msgstr "franklin@goodhorse.idv.tw, s8321414@gmail.com"
 
 #: actions/bundled/brightnesscontrol.cpp:52
 #: actions/bundled/handlebuttonevents.cpp:57
 #: actions/bundled/keyboardbrightnesscontrol.cpp:57
 #, kde-format
 msgctxt "Name for powerdevil shortcuts category"
 msgid "Power Management"
 msgstr "電源管理"
 
 #: actions/bundled/brightnesscontrol.cpp:55
 #, kde-format
 msgctxt "@action:inmenu Global shortcut"
 msgid "Increase Screen Brightness"
 msgstr "遞增螢幕亮度"
 
 #: actions/bundled/brightnesscontrol.cpp:60
 #, kde-format
 msgctxt "@action:inmenu Global shortcut"
 msgid "Decrease Screen Brightness"
 msgstr "遞減螢幕亮度"
 
 #: actions/bundled/brightnesscontrolconfig.cpp:71
 #, kde-format
 msgctxt "Brightness level, label for the slider"
 msgid "Level"
 msgstr "等級"
 
 #: actions/bundled/dimdisplayconfig.cpp:64
 #: actions/bundled/runscriptconfig.cpp:83
 #: actions/bundled/suspendsessionconfig.cpp:79
 #: actions/dpms/powerdevildpmsactionconfig.cpp:60
 #, kde-format
 msgid " min"
 msgstr " 分鐘"
 
 #: actions/bundled/dimdisplayconfig.cpp:74
 #: actions/bundled/runscriptconfig.cpp:86
 #: actions/bundled/runscriptconfig.cpp:107
 #: actions/bundled/suspendsessionconfig.cpp:100
 #, kde-format
 msgid "After"
 msgstr "多久之後："
 
 #: actions/bundled/handlebuttonevents.cpp:62
 #, kde-format
 msgctxt "@action:inmenu Global shortcut"
 msgid "Suspend"
 msgstr "暫停"
 
 #: actions/bundled/handlebuttonevents.cpp:67
 #, kde-format
 msgctxt "@action:inmenu Global shortcut"
 msgid "Hibernate"
 msgstr "休眠"
 
 #: actions/bundled/handlebuttonevents.cpp:72
 #, kde-format
 msgctxt "@action:inmenu Global shortcut"
 msgid "Power Off"
 msgstr "關閉電源"
 
 #: actions/bundled/handlebuttoneventsconfig.cpp:87
 #, kde-format
 msgctxt "Execute action on lid close even when external monitor is connected"
 msgid "Even when an external monitor is connected"
 msgstr "即使連接到外接螢幕"
 
 #: actions/bundled/handlebuttoneventsconfig.cpp:97
 #, kde-format
 msgid "Do nothing"
 msgstr "不做任何事"
 
 #: actions/bundled/handlebuttoneventsconfig.cpp:99
 #: actions/bundled/suspendsessionconfig.cpp:82
 #, kde-format
 msgctxt "Suspend to RAM"
 msgid "Sleep"
 msgstr "睡眠"
 
 #: actions/bundled/handlebuttoneventsconfig.cpp:102
 #: actions/bundled/suspendsessionconfig.cpp:85
 #, kde-format
 msgid "Hibernate"
 msgstr "冬眠"
 
 #: actions/bundled/handlebuttoneventsconfig.cpp:105
 #: actions/bundled/suspendsessionconfig.cpp:88
 #, kde-format
 msgid "Hybrid sleep"
 msgstr "混合式睡眠"
 
 #: actions/bundled/handlebuttoneventsconfig.cpp:107
 #: actions/bundled/suspendsessionconfig.cpp:90
 #, kde-format
 msgid "Shut down"
 msgstr "關機"
 
 #: actions/bundled/handlebuttoneventsconfig.cpp:108
 #: actions/bundled/suspendsessionconfig.cpp:91
 #, kde-format
 msgid "Lock screen"
 msgstr "鎖定螢幕"
 
 #: actions/bundled/handlebuttoneventsconfig.cpp:110
 #, kde-format
 msgid "Prompt log out dialog"
 msgstr "顯示登出對話框"
 
 #: actions/bundled/handlebuttoneventsconfig.cpp:112
 #, kde-format
 msgid "Turn off screen"
 msgstr "關閉螢幕"
 
 #: actions/bundled/handlebuttoneventsconfig.cpp:138
 #, kde-format
 msgid "When laptop lid closed"
 msgstr "當上蓋關閉時"
 
 #: actions/bundled/handlebuttoneventsconfig.cpp:149
 #, kde-format
 msgid "When power button pressed"
 msgstr "當按下電源按鍵時"
 
 #: actions/bundled/keyboardbrightnesscontrol.cpp:61
 #, kde-format
 msgctxt "@action:inmenu Global shortcut"
 msgid "Increase Keyboard Brightness"
 msgstr "遞增鍵盤亮度"
 
 #: actions/bundled/keyboardbrightnesscontrol.cpp:66
 #, kde-format
 msgctxt "@action:inmenu Global shortcut"
 msgid "Decrease Keyboard Brightness"
 msgstr "遞減鍵盤亮度"
 
 #: actions/bundled/keyboardbrightnesscontrol.cpp:71
 #, kde-format
 msgctxt "@action:inmenu Global shortcut"
 msgid "Toggle Keyboard Backlight"
 msgstr "切換鍵盤背光"
 
 #: actions/bundled/keyboardbrightnesscontrolconfig.cpp:71
 #, kde-format
 msgctxt "@label:slider Brightness level"
 msgid "Level"
 msgstr "等級"
 
 #: actions/bundled/runscriptconfig.cpp:72
 #, kde-format
 msgid "Script"
 msgstr "文稿"
 
 #: actions/bundled/runscriptconfig.cpp:84
 #, kde-format
 msgid "On Profile Load"
 msgstr "設定檔載入時"
 
 #: actions/bundled/runscriptconfig.cpp:85
 #, kde-format
 msgid "On Profile Unload"
 msgstr "設定檔卸載時"
 
 #: actions/bundled/runscriptconfig.cpp:96
 #, kde-format
 msgid "Run script"
 msgstr "執行文稿"
 
 #: actions/bundled/wirelesspowersavingconfig.cpp:75
 #: actions/bundled/wirelesspowersavingconfig.cpp:80
 #: actions/bundled/wirelesspowersavingconfig.cpp:85
 #, kde-format
 msgid "Leave unchanged"
 msgstr "保持不變"
 
 #: actions/bundled/wirelesspowersavingconfig.cpp:76
 #: actions/bundled/wirelesspowersavingconfig.cpp:81
 #: actions/bundled/wirelesspowersavingconfig.cpp:86
 #, kde-format
 msgid "Turn off"
 msgstr "關閉"
 
 #: actions/bundled/wirelesspowersavingconfig.cpp:77
 #: actions/bundled/wirelesspowersavingconfig.cpp:82
 #: actions/bundled/wirelesspowersavingconfig.cpp:87
 #, kde-format
 msgid "Turn on"
 msgstr "開啟"
 
 #: actions/bundled/wirelesspowersavingconfig.cpp:110
 #, kde-format
 msgid "Wi-Fi"
 msgstr "Wi-Fi"
 
 #: actions/bundled/wirelesspowersavingconfig.cpp:111
 #, kde-format
 msgid "Mobile broadband"
 msgstr "行動寬頻"
 
 #: actions/bundled/wirelesspowersavingconfig.cpp:112
 #, kde-format
 msgid "Bluetooth"
 msgstr "藍牙"
 
 #: actions/dpms/powerdevildpmsactionconfig.cpp:61
 #, kde-format
 msgid "Switch off after"
 msgstr "多久後關閉電源："
 
 #: backends/upower/backlighthelper.cpp:204
 #, kde-format
 msgid "Can't open file"
 msgstr "無法開啟檔案"
 
 #: backends/upower/login1suspendjob.cpp:76
 #: backends/upower/upowersuspendjob.cpp:69
 #, kde-format
 msgid "Unsupported suspend method"
 msgstr "未支援中止方法"
 
 #: powerdevilapp.cpp:65
 #, kde-format
 msgid "KDE Power Management System"
 msgstr "KDE 電源管理系統"
 
 #: powerdevilapp.cpp:66
 #, kde-format
 msgctxt "@title"
 msgid ""
 "PowerDevil, an advanced, modular and lightweight power management daemon"
 msgstr "PowerDevil，進階、模組化且輕量的電源管理守護程式"
 
 #: powerdevilapp.cpp:68
 #, kde-format
 msgctxt "@info:credit"
 msgid "(c) 2015-2019 Kai Uwe Broulik"
 msgstr "(c) 2015-2019 Kai Uwe Broulik"
 
 #: powerdevilapp.cpp:69
 #, kde-format
 msgctxt "@info:credit"
 msgid "Kai Uwe Broulik"
 msgstr "Kai Uwe Broulik"
 
 #: powerdevilapp.cpp:70
 #, kde-format
 msgctxt "@info:credit"
 msgid "Maintainer"
 msgstr "維護者"
 
 #: powerdevilapp.cpp:72
 #, kde-format
 msgctxt "@info:credit"
 msgid "Dario Freddi"
 msgstr "Dario Freddi"
 
 #: powerdevilapp.cpp:73
 #, kde-format
 msgctxt "@info:credit"
 msgid "Previous maintainer"
 msgstr "前任維護者"
 
 #: powerdevilcore.cpp:91
-#, fuzzy, kde-format
+#, kde-format
 #| msgid ""
 #| "No valid Power Management backend plugins are available. A new "
 #| "installation might solve this problem."
 msgid ""
 "No valid Power Management backend plugins available. A new installation "
 "might solve this problem."
 msgstr "沒有合法的電源管理後端介面外掛程式可用。新的安裝可能可以解決這個問題。"
 
 #: powerdevilcore.cpp:329
-#, fuzzy, kde-format
+#, kde-format
 #| msgid ""
 #| "The profile \"%1\" has been selected, but it does not exist.\n"
 #| "Please check your PowerDevil configuration."
 msgid ""
 "Profile \"%1\" has been selected but does not exist.\n"
 "Please check your PowerDevil configuration."
 msgstr ""
-"已選取設定檔 %1，但現在它不見了。 \n"
+"選擇了設定檔 %1 但該設定檔不存在。 \n"
 "請檢查您的 PowerDevil 設定。"
 
 #: powerdevilcore.cpp:391 powerdevilcore.cpp:403
 #, kde-format
 msgid "Activity Manager"
 msgstr "活動管理員"
 
 #: powerdevilcore.cpp:392
-#, fuzzy, kde-format
+#, kde-format
 #| msgid "This activity's policies prevent the system from suspending"
 msgid "This activity's policies prevent the system from going to sleep"
-msgstr "此活動的政策是避免系統進入暫停（suspending）狀態"
+msgstr "此活動的政策是避免系統進入睡眠狀態"
 
 #: powerdevilcore.cpp:404
 #, kde-format
 msgid "This activity's policies prevent screen power management"
 msgstr "此活動的政策是避免使用螢幕電源管理"
 
 #: powerdevilcore.cpp:436
 #, kde-format
 msgid ""
 "Could not connect to battery interface.\n"
 "Please check your system configuration"
 msgstr ""
 "無法連線到電池介面。\n"
 "請檢查您的系統設定"
 
 #: powerdevilcore.cpp:464
 #, kde-format
 msgid "Extra Battery Added"
 msgstr "新增額外電池"
 
 #: powerdevilcore.cpp:465 powerdevilcore.cpp:641
 #, kde-format
 msgid "The computer will no longer go to sleep."
-msgstr ""
+msgstr "電腦將無法進入睡眠模式。"
 
 #: powerdevilcore.cpp:530
 #, kde-format
 msgctxt "%1 is vendor name, %2 is product name"
 msgid "%1 %2"
 msgstr "%1 %2"
 
 #: powerdevilcore.cpp:539
 #, kde-format
 msgid "Mouse Battery Low (%1% Remaining)"
 msgstr "滑鼠電池電力偏低（剩 %1%）"
 
 #: powerdevilcore.cpp:541 powerdevilcore.cpp:548 powerdevilcore.cpp:555
-#, fuzzy, kde-format
+#, kde-format
 #| msgctxt "Placeholder is device name"
 #| msgid ""
 #| "The battery in your mouse (\"%1\") is low, and the device may turn itself "
 #| "off at any time. Please replace or charge the battery as soon as possible."
 msgctxt "Placeholder is device name"
 msgid ""
 "The battery in (\"%1\") is running low, and the device may turn off at any "
 "time. Please recharge or replace the battery."
 msgstr ""
-"在您的滑鼠中的電池 (\"%1\") 電力偏低，裝置隨時可能關閉。請盡快更換電池或充"
+"(\"%1\") 裝置中的電池電量偏低，裝置隨時可能關閉。請盡快更換電池或充"
 "電。"
 
 #: powerdevilcore.cpp:546
 #, kde-format
 msgid "Keyboard Battery Low (%1% Remaining)"
 msgstr "鍵盤電池電力偏低（剩 %1%）"
 
 #: powerdevilcore.cpp:553
 #, kde-format
 msgctxt "The battery in an external device"
 msgid "Device Battery Low (%1% Remaining)"
 msgstr "裝置電池電力偏低（剩 %1%）"
 
 #: powerdevilcore.cpp:579
 #, kde-format
 msgid "Battery Low (%1% Remaining)"
 msgstr "電池電力偏低（剩 %1%）"
 
 #: powerdevilcore.cpp:580
-#, fuzzy, kde-format
+#, kde-format
 #| msgid ""
 #| "Your battery is low. If you need to continue using your computer, either "
 #| "plug in your computer, or shut it down and then change the battery."
 msgid ""
 "Battery running low - to continue using your computer, plug it in or shut it "
 "down and change the battery."
-msgstr ""
-"您的電池電力偏低。若您要繼續使用您的電腦，請插入市電，或是關閉然後更換電池。"
+msgstr "電池電量偏低 - 若要繼續使用您的電腦，請插入市電或是關機更換電池。"
 
 #: powerdevilcore.cpp:591
 #, kde-format
 msgid "Battery Critical (%1% Remaining)"
 msgstr "電池電力嚴重不足（剩 %1%）"
 
 #: powerdevilcore.cpp:593
-#, fuzzy, kde-format
+#, kde-format
 #| msgctxt ""
 #| "Cancel timeout that will automatically suspend system because of low "
 #| "battery"
 #| msgid "Cancel"
 msgctxt ""
 "Cancel timeout that will automatically put system to sleep because of low "
 "battery"
 msgid "Cancel"
 msgstr "取消"
 
 #: powerdevilcore.cpp:602
-#, fuzzy, kde-format
+#, kde-format
 #| msgid ""
 #| "Your battery level is critical, the computer will be halted in 60 seconds."
 msgid "Battery level critical. Your computer will shut down in 60 seconds."
-msgstr "您的電池電力已達嚴重不足的程度，將在 60 秒內關機。"
+msgstr "電池電力嚴重不足，電腦將在 60 秒內關機。"
 
 #: powerdevilcore.cpp:607
-#, fuzzy, kde-format
+#, kde-format
 #| msgid ""
 #| "Your battery level is critical, the computer will be hibernated in 60 "
 #| "seconds."
 msgid ""
 "Battery level critical. Your computer will enter hibernation mode in 60 "
 "seconds."
-msgstr "您的電池電力已達嚴重不足的程度，將在 60 秒內進入冬眠模式。"
+msgstr "電池電力嚴重不足，電腦將在 60 秒內進入休眠模式。"
 
 #: powerdevilcore.cpp:612
-#, fuzzy, kde-format
+#, kde-format
 #| msgid ""
 #| "Your battery level is critical, the computer will be halted in 60 seconds."
 msgid "Battery level critical. Your computer will go to sleep in 60 seconds."
-msgstr "您的電池電力已達嚴重不足的程度，將在 60 秒內關機。"
+msgstr "電池電力嚴重不足，電腦將在 60 秒內進入睡眠模式。"
 
 #: powerdevilcore.cpp:617
-#, fuzzy, kde-format
+#, kde-format
 #| msgid "Your battery level is critical, save your work as soon as possible."
 msgid "Battery level critical. Please save your work."
-msgstr "您的電池電力已達嚴重不足的程度，請盡快儲存您的工作！"
+msgstr "電池電力嚴重不足，請儲存您的作業。"
 
 #: powerdevilcore.cpp:640
 #, kde-format
 msgid "AC Adapter Plugged In"
 msgstr "當市電電源已插上時"
 
 #: powerdevilcore.cpp:643
 #, kde-format
 msgid "Running on AC power"
 msgstr "接市電電源"
 
 #: powerdevilcore.cpp:643
-#, fuzzy, kde-format
+#, kde-format
 #| msgid "The power adaptor has been plugged in."
 msgid "The power adapter has been plugged in."
-msgstr "市電電源已插上。"
+msgstr "已插入市電電源。"
 
 #: powerdevilcore.cpp:646
 #, kde-format
 msgid "Running on Battery Power"
 msgstr "使用電池電力"
 
 #: powerdevilcore.cpp:646
-#, fuzzy, kde-format
+#, kde-format
 #| msgid "The power adaptor has been unplugged."
 msgid "The power adapter has been unplugged."
-msgstr "市電電源已拔除。"
+msgstr "已拔除市電電源。"
 
 #: powerdevilcore.cpp:652
-#, fuzzy, kde-format
+#, kde-format
 #| msgid ""
 #| "KDE Power Management System could not be initialized. The backend "
 #| "reported the following error: %1\n"
 #| "Please check your system configuration"
 msgid ""
 "The KDE Power Management System could not be initialized. The backend "
 "reported the following error: %1\n"
 "Please check your system configuration"
 msgstr ""
 "KDE 電源管理系統無法初始化。後端介面回報錯誤：%1\n"
 "請檢查您的系統設定"
 
 #: powerdevilcore.cpp:713
-#, fuzzy, kde-format
+#, kde-format
 #| msgid "Charge Complete"
 msgid "Charging Complete"
 msgstr "充電完成"
 
 #: powerdevilcore.cpp:713
-#, fuzzy, kde-format
+#, kde-format
 #| msgid "Your battery is now fully charged."
 msgid "Battery now fully charged."
-msgstr "您的電池已充飽。"
+msgstr "電池已充飽。"
 
 #~ msgid "All pending suspend actions have been canceled."
 #~ msgstr "任何暫停的動作都已被取消。"
 
 #~ msgctxt "Placeholder is device name"
 #~ msgid ""
 #~ "The battery in your keyboard (\"%1\") is low, and the device may turn "
 #~ "itself off at any time. Please replace or charge the battery as soon as "
 #~ "possible."
 #~ msgstr ""
 #~ "在您的鍵盤中的電池 (\"%1\") 電力偏低，該裝置可能會在任何時候關閉它自己。請"
 #~ "盡快換新電池或是對其充電。"
 
 #~ msgctxt "Placeholder is device name"
 #~ msgid ""
 #~ "The battery in a connected device (\"%1\") is low, and the device may "
 #~ "turn itself off at any time. Please replace or charge the battery as soon "
 #~ "as possible."
 #~ msgstr ""
 #~ "在您的裝置中的電池 (\"%1\") 電力偏低，該裝置可能會在任何時候關閉它自己。請"
 #~ "盡快換新電池或是對其充電。"
 
 #~ msgid ""
 #~ "Your battery level is critical, the computer will be suspended in 60 "
 #~ "seconds."
 #~ msgstr "您的電池電力已達嚴重不足的程度，將在 60 秒內暫停。"
Index: trunk/l10n-kf5/zh_TW/messages/kdegraphics/spectacle.po
===================================================================
--- trunk/l10n-kf5/zh_TW/messages/kdegraphics/spectacle.po	(revision 1537713)
+++ trunk/l10n-kf5/zh_TW/messages/kdegraphics/spectacle.po	(revision 1537714)
@@ -1,803 +1,803 @@
 # Copyright (C) YEAR This_file_is_part_of_KDE
 # This file is distributed under the same license as the PACKAGE package.
 #
 # Jeff Huang <s8321414@gmail.com>, 2016, 2017.
 # pan93412 <pan93412@gmail.com>, 2018, 2019.
 msgid ""
 msgstr ""
 "Project-Id-Version: spectacle\n"
 "Report-Msgid-Bugs-To: http://bugs.kde.org\n"
 "POT-Creation-Date: 2019-03-19 03:21+0100\n"
-"PO-Revision-Date: 2019-03-16 15:16+0800\n"
+"PO-Revision-Date: 2019-03-19 19:27+0800\n"
 "Last-Translator: pan93412 <pan93412@gmail.com>\n"
 "Language-Team: Chinese <zh-l10n@linux.org.tw>\n"
 "Language: Traditional Chinese\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=1; plural=0;\n"
 "X-Generator: Lokalize 18.12.3\n"
 
 #: src/ExportManager.cpp:290
 #, kde-format
 msgid "QImageWriter cannot write image: %1"
 msgstr "QImageWriter 無法寫入影像：%1"
 
 #: src/ExportManager.cpp:305
 #, kde-kuit-format
 msgctxt "@info"
 msgid ""
 "Cannot save screenshot because creating the directory failed:<nl/><filename>"
 "%1</filename>"
 msgstr "無法儲存螢幕截圖，因為建立目錄失敗：<nl/><filename>%1</filename>"
 
 #: src/ExportManager.cpp:315
 #, kde-format
 msgid "Cannot save screenshot. Error while writing file."
 msgstr "無法儲存螢幕快照。寫入檔案時失敗。"
 
 #: src/ExportManager.cpp:336
 #, kde-kuit-format
 msgctxt "@info"
 msgid ""
 "Cannot save screenshot because creating the remote directory failed:<nl/"
 "><filename>%1</filename>"
 msgstr "無法儲存螢幕截圖，因為建立遠端目錄失敗：<nl/><filename>%1</filename>"
 
 #: src/ExportManager.cpp:347 src/ExportManager.cpp:396
 #, kde-format
 msgid "Cannot save screenshot. Error while writing temporary local file."
 msgstr "無法儲存螢幕快照。寫入暫存檔案時失敗。"
 
 #: src/ExportManager.cpp:355
 #, kde-format
 msgid "Unable to save image. Could not upload file to remote location."
 msgstr "無法儲存影像。無法上傳檔案到遠端。"
 
 #: src/ExportManager.cpp:403
 #, kde-format
 msgid "Cannot save screenshot. The save filename is invalid."
 msgstr "無法儲存螢幕快照。儲存的檔名不合法。"
 
 #: src/ExportManager.cpp:436
 #, kde-format
 msgid "Cannot save an empty screenshot image."
 msgstr "無法儲存空白的螢幕快照影像。"
 
 #: src/ExportManager.cpp:505
 #, kde-format
 msgid "Printing failed. The printer failed to initialize."
 msgstr "列印失敗。列印機初始化失敗。"
 
 #: src/ExportManager.cpp:523
 #, kde-format
 msgctxt ""
 "A placeholder in the user configurable filename will replaced by the "
 "specified value"
 msgid "Year (4 digit)"
 msgstr "年（四位數）"
 
 #: src/ExportManager.cpp:524
 #, kde-format
 msgctxt ""
 "A placeholder in the user configurable filename will replaced by the "
 "specified value"
 msgid "Year (2 digit)"
 msgstr "年（兩位數）"
 
 #: src/ExportManager.cpp:525
 #, kde-format
 msgctxt ""
 "A placeholder in the user configurable filename will replaced by the "
 "specified value"
 msgid "Month"
 msgstr "月"
 
 #: src/ExportManager.cpp:526
 #, kde-format
 msgctxt ""
 "A placeholder in the user configurable filename will replaced by the "
 "specified value"
 msgid "Day"
 msgstr "日"
 
 #: src/ExportManager.cpp:527
 #, kde-format
 msgctxt ""
 "A placeholder in the user configurable filename will replaced by the "
 "specified value"
 msgid "Hour"
 msgstr "時"
 
 #: src/ExportManager.cpp:528
 #, kde-format
 msgctxt ""
 "A placeholder in the user configurable filename will replaced by the "
 "specified value"
 msgid "Minute"
 msgstr "分"
 
 #: src/ExportManager.cpp:529
 #, kde-format
 msgctxt ""
 "A placeholder in the user configurable filename will replaced by the "
 "specified value"
 msgid "Second"
 msgstr "秒"
 
 #: src/ExportManager.cpp:530
 #, kde-format
 msgctxt ""
 "A placeholder in the user configurable filename will replaced by the "
 "specified value"
 msgid "Window Title"
 msgstr "視窗標題"
 
 #: src/ExportManager.cpp:531
 #, kde-format
 msgctxt ""
 "A placeholder in the user configurable filename will replaced by the "
 "specified value"
 msgid "Sequential numbering"
 msgstr "順序編號"
 
 #: src/ExportManager.cpp:532
 #, kde-format
 msgctxt ""
 "A placeholder in the user configurable filename will replaced by the "
 "specified value"
 msgid "Sequential numbering, padded out to N digits"
 msgstr "順序編號（填充至 N 位數）"
 
 #: src/Gui/ExportMenu.cpp:54
 #, kde-format
 msgid "More Online Services"
 msgstr "更多線上服務"
 
 #: src/Gui/ExportMenu.cpp:55
 #, kde-format
 msgid "Please wait..."
 msgstr "請稍候..."
 
 #: src/Gui/ExportMenu.cpp:102
 #, kde-format
 msgid "Other Application"
 msgstr "其它應用程式"
 
 #: src/Gui/ExportMenu.cpp:143
 #, kde-format
 msgid "KIPI plugin from library %1 failed to load"
 msgstr "函式庫 %1 的 KIPI 外掛程式載入失敗"
 
 #: src/Gui/ExportMenu.cpp:168
 #, kde-format
 msgid "No KIPI plugins available"
 msgstr "沒有可用的 KIPI 外掛程式"
 
 #: src/Gui/ExportMenu.cpp:178
 #, kde-format
 msgid "Share"
 msgstr "分享"
 
 #: src/Gui/KSImageWidget.cpp:41
 #, kde-format
 msgid "Image Size: %1x%2 pixels"
 msgstr "影像大小：%1x%2 像素"
 
 #: src/Gui/KSMainWindow.cpp:138
 #, kde-format
 msgid "Configure..."
 msgstr "配置 ..."
 
 #: src/Gui/KSMainWindow.cpp:139
 #, kde-format
 msgid "Change Spectacle's settings."
 msgstr "變更 Spectacle 的設定"
 
 #: src/Gui/KSMainWindow.cpp:143
 #, kde-format
 msgid "Tools"
 msgstr "工具"
 
 #: src/Gui/KSMainWindow.cpp:149
 #, kde-format
 msgid "Export"
 msgstr "匯出"
 
 #: src/Gui/KSMainWindow.cpp:154
 #, kde-format
 msgid "Copy to Clipboard"
 msgstr "複製到剪貼簿"
 
 #: src/Gui/KSMainWindow.cpp:155
 #, kde-format
 msgid "Copy the current screenshot image to the clipboard."
 msgstr "將目前的螢幕快照複製到剪貼簿。"
 
 #: src/Gui/KSMainWindow.cpp:170
 #, kde-format
 msgid "Open Screenshots Folder"
 msgstr "開啟螢幕擷取資料夾"
 
 #: src/Gui/KSMainWindow.cpp:173
 #, kde-format
 msgid "Record Screen"
 msgstr "錄製螢幕"
 
 #: src/Gui/KSMainWindow.cpp:247
 #, kde-format
 msgid "Save As..."
 msgstr "儲存為…"
 
 #: src/Gui/KSMainWindow.cpp:282
 #, kde-format
 msgctxt "@title:window Unsaved Screenshot"
 msgid "Unsaved[*]"
 msgstr "未儲存[*]"
 
 #: src/Gui/KSMainWindow.cpp:377
 #, kde-format
 msgid "There was a problem sharing the image: %1"
 msgstr "分享圖片時發生問題：%1"
 
 #: src/Gui/KSMainWindow.cpp:381
 #, kde-format
 msgid "Image shared"
 msgstr "已分享圖片"
 
 #: src/Gui/KSMainWindow.cpp:383
 #, kde-format
 msgid ""
 "The shared image link (<a href=\"%1\">%1</a>) has been copied to the "
 "clipboard."
 msgstr "分享的圖片連結 (<a href=\"%1\">%1</a>) 已經複製到剪貼簿。"
 
 #: src/Gui/KSMainWindow.cpp:396
 #, kde-format
 msgid "The screenshot has been copied to the clipboard."
 msgstr "螢幕快照已複製到剪貼簿。"
 
 #: src/Gui/KSWidget.cpp:54
 #, kde-format
 msgid "<b>Capture Mode</b>"
 msgstr "<b>擷取模式</b>"
 
 #: src/Gui/KSWidget.cpp:58
 #, kde-format
 msgid "Full Screen"
 msgstr "全螢幕"
 
 #: src/Gui/KSWidget.cpp:59
 #, kde-format
 msgid "Full Screen (All Monitors)"
 msgstr "全螢幕（所有螢幕）"
 
 #: src/Gui/KSWidget.cpp:64
 #, kde-format
 msgid "Current Screen"
 msgstr "目前的螢幕"
 
 #: src/Gui/KSWidget.cpp:66
 #, kde-format
 msgid "Active Window"
 msgstr "作用中視窗"
 
 #: src/Gui/KSWidget.cpp:68
 #, kde-format
 msgid "Window Under Cursor"
 msgstr "游標下的視窗"
 
 #: src/Gui/KSWidget.cpp:70 src/Gui/SettingsDialog/GeneralOptionsPage.cpp:62
 #, kde-format
 msgid "Rectangular Region"
 msgstr "矩形區域"
 
 #: src/Gui/KSWidget.cpp:79
 #, kde-format
 msgid "No Delay"
 msgstr "無延遲"
 
 #: src/Gui/KSWidget.cpp:84
 #, kde-format
 msgid "On Click"
 msgstr "點選時"
 
 #: src/Gui/KSWidget.cpp:85
 #, kde-format
 msgid "Wait for a mouse click before capturing the screenshot image"
 msgstr "滑鼠點選時擷取螢幕快照"
 
 #: src/Gui/KSWidget.cpp:94
 #, kde-format
 msgid "Area:"
 msgstr "區域："
 
 #: src/Gui/KSWidget.cpp:95
 #, kde-format
 msgid "Delay:"
 msgstr "延遲："
 
 #: src/Gui/KSWidget.cpp:101
 #, kde-format
 msgid "<b>Options</b>"
 msgstr "<b>選項</b>"
 
 #: src/Gui/KSWidget.cpp:103
 #, kde-format
 msgid "Include mouse pointer"
 msgstr "包含滑鼠游標"
 
 #: src/Gui/KSWidget.cpp:104
 #, kde-format
 msgid "Show the mouse cursor in the screenshot image"
 msgstr "在螢幕快照的圖片中顯示滑鼠游標"
 
 #: src/Gui/KSWidget.cpp:107
 #, kde-format
 msgid "Include window titlebar and borders"
 msgstr "包含視窗標題列與邊框"
 
 #: src/Gui/KSWidget.cpp:108
 #, kde-format
 msgid ""
 "Show the window title bar, the minimize/maximize/close buttons, and the "
 "window border"
 msgstr "顯示視窗標題列、最小化/最大化/關閉按鈕以及視窗邊框"
 
 #: src/Gui/KSWidget.cpp:112
 #, kde-format
 msgid "Capture the current pop-up only"
 msgstr "僅擷取目前的彈出式視窗"
 
 #: src/Gui/KSWidget.cpp:113
 #, kde-format
 msgid ""
 "Capture only the current pop-up window (like a menu, tooltip etc).\n"
 "If disabled, the pop-up is captured along with the parent window"
 msgstr ""
 "僅擷取目前的彈出式視窗（像是選單、工具提示等）。\n"
 "若停用，彈出式視窗將會與其母視窗一起被擷取"
 
 #: src/Gui/KSWidget.cpp:118
 #, kde-format
 msgid "Quit after Save or Copy"
 msgstr "儲存或複製後退出"
 
 #: src/Gui/KSWidget.cpp:119
 #, kde-format
 msgid "Quit Spectacle after saving or copying the image"
 msgstr "儲存或複製圖片後退出 Spectacle"
 
 #: src/Gui/KSWidget.cpp:131
 #, kde-format
 msgid "Take a New Screenshot"
 msgstr "拍一張新的螢幕快照"
 
 #: src/Gui/SettingsDialog/GeneralOptionsPage.cpp:41
 #, kde-format
 msgid "When Spectacle is Running"
 msgstr "當 Spectacle 執行時"
 
 #: src/Gui/SettingsDialog/GeneralOptionsPage.cpp:44
 #, kde-format
 msgid "Take a new screenshot"
 msgstr "擷取一張螢幕截圖"
 
 #: src/Gui/SettingsDialog/GeneralOptionsPage.cpp:45
 #, kde-format
 msgid "Open a new Spectacle window"
 msgstr "開啟新 Spectacle 視窗"
 
 #: src/Gui/SettingsDialog/GeneralOptionsPage.cpp:51
 #, kde-format
 msgid "Press screenshot key to:"
 msgstr "按下「擷取螢幕截圖」鍵要做的動作："
 
 #: src/Gui/SettingsDialog/GeneralOptionsPage.cpp:55
 #, kde-format
 msgid "Return focus to Spectacle"
 msgstr "將焦點重新轉移到 Spectacle"
 
 #: src/Gui/SettingsDialog/GeneralOptionsPage.cpp:67
 #, kde-format
 msgid "Use light background"
 msgstr "使用較亮的背景"
 
 #: src/Gui/SettingsDialog/GeneralOptionsPage.cpp:69
 #, kde-format
 msgid "General:"
 msgstr "一般："
 
 #: src/Gui/SettingsDialog/GeneralOptionsPage.cpp:72
 #, kde-format
 msgid "Show magnifier"
 msgstr "顯示放大鏡"
 
 #: src/Gui/SettingsDialog/GeneralOptionsPage.cpp:77
 #, kde-format
 msgid "Accept on click-and-release"
 msgstr "點選並釋放時接受"
 
 #: src/Gui/SettingsDialog/GeneralOptionsPage.cpp:86
 #, kde-format
 msgid "Never"
 msgstr "永不記住"
 
 #: src/Gui/SettingsDialog/GeneralOptionsPage.cpp:87
 #, kde-format
 msgid "Always"
 msgstr "永遠記住"
 
 #: src/Gui/SettingsDialog/GeneralOptionsPage.cpp:88
 #, kde-format
 msgid "Until Spectacle is closed"
 msgstr "記住到 Spectacle 關閉"
 
 #: src/Gui/SettingsDialog/GeneralOptionsPage.cpp:94
 #, kde-format
 msgid "Remember selected area:"
 msgstr "記住選取區域："
 
 #: src/Gui/SettingsDialog/SaveOptionsPage.cpp:47
 #, kde-format
 msgid "Save Location:"
 msgstr "儲存位置："
 
 #: src/Gui/SettingsDialog/SaveOptionsPage.cpp:50
 #, kde-format
 msgid "Copy file location to clipboard after saving"
 msgstr "儲存後複製檔案位置到剪貼簿"
 
 #: src/Gui/SettingsDialog/SaveOptionsPage.cpp:84
 #, kde-format
 msgid "Choose the image quality when saving with lossy image formats like JPEG"
 msgstr "當儲存有損影像格式（例如 JPEG）時讓使用者選擇影像品質"
 
 #: src/Gui/SettingsDialog/SaveOptionsPage.cpp:88
 #, kde-format
 msgid "Compression Quality:"
 msgstr "壓縮品質："
 
 #: src/Gui/SettingsDialog/SaveOptionsPage.cpp:123
 #, kde-format
 msgid "Filename:"
 msgstr "檔案名稱："
 
 #: src/Gui/SettingsDialog/SaveOptionsPage.cpp:126
 #, kde-format
 msgctxt "Preview of the user configured filename"
 msgid "Preview:"
-msgstr ""
+msgstr "預覽："
 
 #: src/Gui/SettingsDialog/SaveOptionsPage.cpp:129
 #, kde-format
 msgid ""
 "You can use the following placeholders in the filename, which will be "
 "replaced with actual text when the file is saved:<blockquote>"
 msgstr ""
 "您能在檔案名稱使用以下的佔位符，這些佔位符將在檔案儲存時替換成實際文字："
 "<blockquote>"
 
 #: src/Gui/SettingsDialog/SaveOptionsPage.cpp:136
 #, kde-format
 msgid "To save to a sub-folder"
 msgstr "若要儲存到子資料夾"
 
 #: src/Gui/SettingsDialog/SaveOptionsPage.cpp:216
 #, kde-kuit-format
 msgctxt "@info"
 msgid "<filename>%1.%2</filename>"
-msgstr ""
+msgstr "<filename>%1.%2</filename>"
 
 #: src/Gui/SettingsDialog/SettingsDialog.cpp:34
 #, kde-format
 msgctxt "@title:window"
 msgid "Configure"
 msgstr "設定"
 
 #: src/Gui/SettingsDialog/SettingsDialog.cpp:44
 #: src/Gui/SettingsDialog/SettingsDialog.cpp:45
 #, kde-format
 msgid "General"
 msgstr "一般"
 
 #: src/Gui/SettingsDialog/SettingsDialog.cpp:50
 #: src/Gui/SettingsDialog/SettingsDialog.cpp:51
 #, kde-format
 msgid "Save"
 msgstr "儲存"
 
 #: src/Gui/SettingsDialog/SettingsDialog.cpp:77
 #, kde-format
 msgid "Apply Unsaved Changes"
 msgstr "套用未儲存的改變"
 
 #: src/Gui/SettingsDialog/SettingsDialog.cpp:78
 #, kde-format
 msgid ""
 "You have made changes to the settings in this tab. Do you want to apply "
 "those changes?"
 msgstr "您已經在此分頁中變更了設定。您想要套用這些變更嗎？"
 
 #: src/Gui/SmartSpinBox.cpp:44
 #, kde-format
 msgctxt "Integer number of seconds"
 msgid " second"
 msgid_plural " seconds"
 msgstr[0] "秒"
 
 #: src/Gui/SmartSpinBox.cpp:46
 #, kde-format
 msgctxt "Decimal number of seconds"
 msgid " seconds"
 msgstr "秒"
 
 #: src/KipiInterface/KSGKipiImageCollectionSelector.cpp:35
 #, kde-format
 msgctxt "%1 is collection name, %2 is image count in collection"
 msgid "%1 (%2 image)"
 msgid_plural "%1 (%2 images)"
 msgstr[0] "%1（%2 張影像）"
 
 #: src/KipiInterface/KSGKipiInfoShared.cpp:39
 #, kde-format
 msgid "Taken with Spectacle"
 msgstr "用 Spectale 擷取"
 
 #: src/Main.cpp:43
 #, kde-format
 msgid "Spectacle"
 msgstr "Spectacle"
 
 #: src/Main.cpp:45
 #, kde-format
 msgid "KDE Screenshot Utility"
 msgstr "KDE 螢幕快照擷取工具"
 
 #: src/Main.cpp:47
 #, kde-format
 msgid "(C) 2015 Boudhayan Gupta"
 msgstr "(C) 2015 Boudhayan Gupta"
 
 #: src/Main.cpp:49
 #, kde-format
 msgctxt "NAME OF TRANSLATORS"
 msgid "Your names"
 msgstr "Franklin Weng, Jeff Huang"
 
 #: src/Main.cpp:49
 #, kde-format
 msgctxt "EMAIL OF TRANSLATORS"
 msgid "Your emails"
 msgstr "franklin@goodhorse.idv.tw, s8321414@gmail.com"
 
 #: src/Main.cpp:59
 #, kde-format
 msgid "Capture the entire desktop (default)"
 msgstr "擷取整個桌面（預設）"
 
 #: src/Main.cpp:60
 #, kde-format
 msgid "Capture the current monitor"
 msgstr "擷取目前螢幕"
 
 #: src/Main.cpp:61
 #, kde-format
 msgid "Capture the active window"
 msgstr "擷取作用中的視窗"
 
 #: src/Main.cpp:62
 #, kde-format
 msgid ""
 "Capture the window currently under the cursor, including parents of pop-up "
 "menus"
 msgstr "擷取目前在滑鼠游標下的視窗，包含彈出式選單的母視窗"
 
 #: src/Main.cpp:63
 #, kde-format
 msgid ""
 "Capture the window currently under the cursor, excluding parents of pop-up "
 "menus"
 msgstr "擷取目前在滑鼠游標下的視窗，不包含彈出式選單的母視窗"
 
 #: src/Main.cpp:64
 #, kde-format
 msgid "Capture a rectangular region of the screen"
 msgstr "擷取螢幕的矩形區域"
 
 #: src/Main.cpp:65
 #, kde-format
 msgid "Start in GUI mode (default)"
 msgstr "以圖形化使用介面模式啟動（預設）"
 
 #: src/Main.cpp:66
 #, kde-format
 msgid "Take a screenshot and exit without showing the GUI"
 msgstr "拍一張螢幕快照並結束而不顯示圖形介面"
 
 #: src/Main.cpp:67
 #, kde-format
 msgid "Start in DBus-Activation mode"
 msgstr "以 DBus 活化模式啟動"
 
 #: src/Main.cpp:68
 #, kde-format
 msgid ""
 "In background mode, do not pop up a notification when the screenshot is taken"
 msgstr "在背景模式下，當螢幕快照擷取後，不要彈出通知"
 
 #: src/Main.cpp:69
 #, kde-format
 msgid "In background mode, save image to specified file"
 msgstr "在背景模式下，儲存圖片到特定的檔案"
 
 #: src/Main.cpp:70
 #, kde-format
 msgid "In background mode, delay before taking the shot (in milliseconds)"
 msgstr "在背景模式下，在擷取前延遲（以毫秒計）"
 
 #: src/Main.cpp:71
 #, kde-format
 msgid "Wait for a click before taking screenshot. Invalidates delay"
 msgstr "在拍攝螢幕快照前等待滑鼠點選。延遲無效"
 
 #: src/QuickEditor/QuickEditor.cpp:59
 #, kde-format
 msgid ""
 "Click and drag to draw a selection rectangle,\n"
 "or press Esc to quit"
 msgstr "長按拖曳來繪製選取區塊的矩形，或按 Esc 退出"
 
 #: src/QuickEditor/QuickEditor.cpp:525
 #, kde-format
 msgctxt "Mouse action"
 msgid "Click and drag,"
 msgstr "點選並拖曳，"
 
 #: src/QuickEditor/QuickEditor.cpp:525
 #, kde-format
 msgid " "
 msgstr " "
 
 #: src/QuickEditor/QuickEditor.cpp:526 src/QuickEditor/QuickEditor.cpp:554
 #, kde-format
 msgctxt "Keyboard/mouse action"
 msgid "Enter, double-click:"
 msgstr "Enter, 按兩下："
 
 #: src/QuickEditor/QuickEditor.cpp:527 src/QuickEditor/QuickEditor.cpp:555
 #, kde-format
 msgid "Take screenshot"
 msgstr "拍張螢幕快照"
 
 #: src/QuickEditor/QuickEditor.cpp:528 src/QuickEditor/QuickEditor.cpp:545
 #: src/QuickEditor/QuickEditor.cpp:556
 #, kde-format
 msgctxt "Keyboard action"
 msgid "Shift:"
 msgstr "Shift:"
 
 #: src/QuickEditor/QuickEditor.cpp:529 src/QuickEditor/QuickEditor.cpp:546
 #: src/QuickEditor/QuickEditor.cpp:557
 #, kde-format
 msgctxt "Shift key action first half"
 msgid "Hold to toggle magnifier"
 msgstr "長按切換放大鏡"
 
 #: src/QuickEditor/QuickEditor.cpp:530 src/QuickEditor/QuickEditor.cpp:558
 #, kde-format
 msgctxt "Shift key action second half"
 msgid "while dragging selection handles"
 msgstr "當拖曳選取區域時"
 
 #: src/QuickEditor/QuickEditor.cpp:532 src/QuickEditor/QuickEditor.cpp:560
 #, kde-format
 msgctxt "Keyboard action"
 msgid "Arrow keys:"
 msgstr "方向鍵："
 
 #: src/QuickEditor/QuickEditor.cpp:533 src/QuickEditor/QuickEditor.cpp:561
 #, kde-format
 msgctxt "Shift key action first line"
 msgid "Move selection rectangle"
 msgstr "移動選擇的矩形"
 
 #: src/QuickEditor/QuickEditor.cpp:534 src/QuickEditor/QuickEditor.cpp:562
 #, kde-format
 msgctxt "Shift key action second line"
 msgid "Hold Alt to resize, Shift to fine‑tune"
 msgstr "長按 Alt 縮放，Shift 微調"
 
 #: src/QuickEditor/QuickEditor.cpp:536 src/QuickEditor/QuickEditor.cpp:547
 #: src/QuickEditor/QuickEditor.cpp:564
 #, kde-format
 msgctxt "Mouse action"
 msgid "Right-click:"
 msgstr "右鍵："
 
 #: src/QuickEditor/QuickEditor.cpp:537 src/QuickEditor/QuickEditor.cpp:548
 #: src/QuickEditor/QuickEditor.cpp:565
 #, kde-format
 msgid "Reset selection"
 msgstr "重設選取區域"
 
 #: src/QuickEditor/QuickEditor.cpp:538 src/QuickEditor/QuickEditor.cpp:549
 #: src/QuickEditor/QuickEditor.cpp:566
 #, kde-format
 msgctxt "Keyboard action"
 msgid "Esc:"
 msgstr "Esc:"
 
 #: src/QuickEditor/QuickEditor.cpp:538 src/QuickEditor/QuickEditor.cpp:549
 #: src/QuickEditor/QuickEditor.cpp:566
 #, kde-format
 msgid "Cancel"
 msgstr "取消"
 
 #: src/QuickEditor/QuickEditor.cpp:543
 #, kde-format
 msgctxt "Keyboard/mouse action"
 msgid "Release left-click, Enter:"
 msgstr "釋放左鍵，輸入："
 
 #: src/QuickEditor/QuickEditor.cpp:544
 #, kde-format
 msgid "Take Screenshot"
 msgstr "拍張螢幕快照"
 
 #: src/QuickEditor/QuickEditor.cpp:740
 #, kde-format
 msgid "%1×%2"
 msgstr "%1×%2"
 
 #: src/SpectacleCore.cpp:240
 #, kde-format
 msgid "Screenshot capture canceled or failed"
 msgstr "螢幕快照擷取取消或失敗"
 
 #: src/SpectacleCore.cpp:259
 #, kde-format
 msgctxt "The entire screen area was captured, heading"
 msgid "Full Screen Captured"
 msgstr "已擷取全螢幕"
 
 #: src/SpectacleCore.cpp:262
 #, kde-format
 msgctxt "The current screen was captured, heading"
 msgid "Current Screen Captured"
 msgstr "已擷取目前的螢幕"
 
 #: src/SpectacleCore.cpp:265
 #, kde-format
 msgctxt "The active window was captured, heading"
 msgid "Active Window Captured"
 msgstr "已擷取作用中視窗"
 
 #: src/SpectacleCore.cpp:269
 #, kde-format
 msgctxt "The window under the mouse was captured, heading"
 msgid "Window Under Cursor Captured"
 msgstr "已擷取游標下的視窗"
 
 #: src/SpectacleCore.cpp:272
 #, kde-format
 msgctxt "A rectangular region was captured, heading"
 msgid "Rectangular Region Captured"
 msgstr "已擷取矩形區域"
 
 #: src/SpectacleCore.cpp:283
 #, kde-format
 msgctxt "Placeholder is filename"
 msgid "A screenshot was saved as '%1' to your Pictures folder."
 msgstr "螢幕快照被儲存為「%1」到您的圖片資料夾中。"
 
 #: src/SpectacleCore.cpp:285
 #, kde-format
 msgid "A screenshot was saved as '%1' to '%2'."
 msgstr "螢幕快照被儲存為「%1」到「%2」中。"
 
 #: src/SpectacleCore.cpp:288
 #, kde-format
 msgctxt "Open the screenshot we just saved"
 msgid "Open"
 msgstr "開啟"
Index: trunk/l10n-kf5/zh_TW/messages/kdemultimedia/kmix.po
===================================================================
--- trunk/l10n-kf5/zh_TW/messages/kdemultimedia/kmix.po	(revision 1537713)
+++ trunk/l10n-kf5/zh_TW/messages/kdemultimedia/kmix.po	(revision 1537714)
@@ -1,1162 +1,1162 @@
 # translation of kmix.po to Chinese Traditional
 # Traditional Chinese Translation
 # Copyright (C) 2001, 2006, 2007, 2008 Free Software Foundation, Inc.
+#
 # Joe Man <trmetal@yahoo.com.hk>, 2002.
 # Franklin Weng <franklin@goodhorse.idv.tw>, 2010, 2011, 2012, 2013, 2014.
-# pan93412 <pan93412@gmail.com>, 2018.
-#
+# pan93412 <pan93412@gmail.com>, 2018, 2019.
 # Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv dot tw>, 2006, 2007, 2008, 2009, 2010.
 # Franklin Weng <franklin at goodhorse dot idv dot tw>, 2007, 2008.
 msgid ""
 msgstr ""
 "Project-Id-Version: kmix\n"
 "Report-Msgid-Bugs-To: http://bugs.kde.org\n"
 "POT-Creation-Date: 2019-03-19 03:23+0100\n"
-"PO-Revision-Date: 2018-12-29 22:28+0800\n"
+"PO-Revision-Date: 2019-03-19 19:28+0800\n"
 "Last-Translator: pan93412 <pan93412@gmail.com>\n"
 "Language-Team: Chinese <zh-l10n@linux.org.tw>\n"
 "Language: zh_TW\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Lokalize 18.12.0\n"
+"X-Generator: Lokalize 18.12.3\n"
 "Plural-Forms: nplurals=1; plural=0;\n"
 
 #, kde-format
 msgctxt "NAME OF TRANSLATORS"
 msgid "Your names"
 msgstr "Joe Man, Frank Weng (a.k.a. Franklin)"
 
 #, kde-format
 msgctxt "EMAIL OF TRANSLATORS"
 msgid "Your emails"
 msgstr "trmetal@yahoo.com.hk, franklin@goodhorse.idv.tw"
 
 #: apps/kmix.cpp:182
 #, kde-format
 msgid "Audio Setup..."
 msgstr "音效設定…"
 
 #: apps/kmix.cpp:186
 #, kde-format
 msgid "Hide Mixer Window"
 msgstr "隱藏混音器視窗"
 
 #: apps/kmix.cpp:191
 #, kde-format
 msgid "Configure &Channels..."
 msgstr "設定聲道(&C)..."
 
 #: apps/kmix.cpp:195
 #, kde-format
 msgid "Select Master Channel..."
 msgstr "選擇主聲道..."
 
 #: apps/kmix.cpp:200
 #, kde-format
 msgid "Save volume profile 1"
 msgstr "儲存音量設定檔 1"
 
 #: apps/kmix.cpp:205
 #, kde-format
 msgid "Save volume profile 2"
 msgstr "儲存音量設定檔 2"
 
 #: apps/kmix.cpp:210
 #, kde-format
 msgid "Save volume profile 3"
 msgstr "儲存音量設定檔 3"
 
 #: apps/kmix.cpp:215
 #, kde-format
 msgid "Save volume profile 4"
 msgstr "儲存音量設定檔 4"
 
 #: apps/kmix.cpp:220
 #, kde-format
 msgid "Load volume profile 1"
 msgstr "載入音量設定檔 1"
 
 #: apps/kmix.cpp:225
 #, kde-format
 msgid "Load volume profile 2"
 msgstr "載入音量設定檔 2"
 
 #: apps/kmix.cpp:230
 #, kde-format
 msgid "Load volume profile 3"
 msgstr "載入音量設定檔 3"
 
 #: apps/kmix.cpp:235
 #, kde-format
 msgid "Load volume profile 4"
 msgstr "載入音量設定檔 4"
 
 #: apps/kmix.cpp:246 gui/mdwslider.cpp:166
 #, kde-format
 msgid "Increase Volume"
 msgstr "遞增音量"
 
 #: apps/kmix.cpp:253 gui/mdwslider.cpp:173
 #, kde-format
 msgid "Decrease Volume"
 msgstr "遞減音量"
 
 #: apps/kmix.cpp:258 gui/mdwslider.cpp:115
 #, kde-format
 msgid "Mute"
 msgstr "靜音"
 
 #: apps/kmix.cpp:274
 #, kde-format
 msgid "Add new view"
 msgstr "新增新的檢視"
 
 #: apps/kmix.cpp:812
 #, kde-format
 msgid "Cannot add view - GUIProfile is invalid."
 msgstr "無法新增檢視 - GUIProfile 不合法。"
 
 #: apps/kmix.cpp:812 apps/kmix.cpp:819
 #, kde-format
 msgid "Error"
 msgstr "錯誤"
 
 #: apps/kmix.cpp:819
 #, kde-format
 msgid "Cannot add view - View already exists."
 msgstr "無法新增檢視 - 檢視已經存在。"
 
 #: apps/kmix.cpp:939 apps/kmixd.cpp:199
 #, kde-format
 msgid ""
 "The soundcard containing the master device was unplugged. Changing to "
 "control %1 on card %2."
 msgstr "包含主裝置的音效卡未插入。改為音效卡 %2 上的控制 %1"
 
 #: apps/kmix.cpp:948 apps/kmixd.cpp:209
 #, kde-format
 msgid "The last soundcard was unplugged."
 msgstr "上次的音效卡未插入。"
 
 #: apps/kmix.cpp:1238
 #, kde-format
 msgid ""
 "The helper application is either not installed or not working.\n"
 "\n"
 "%1"
 msgstr ""
 "輔助應用程式未安裝或無法運作。\n"
 "\n"
 "%1"
 
 #: apps/kmix.cpp:1276 gui/dialogaddview.cpp:121 gui/dialogchoosebackends.cpp:71
 #: gui/dialogselectmaster.cpp:102
 #, kde-format
 msgid "No sound card is installed or currently plugged in."
 msgstr "未安裝或未插入音效卡。"
 
 #: apps/kmix.cpp:1290
 #, kde-format
 msgid "Mixer (%1)"
 msgstr "混音器 (%1)"
 
 #: apps/kmixctrl.cpp:36
 #, kde-format
 msgid "kmixctrl - kmix volume save/restore utility"
 msgstr "kmixctrl - 音量 儲存/復原 工具"
 
 #: apps/kmixctrl.cpp:44
 #, kde-format
 msgid "KMixCtrl"
 msgstr "KMixCtrl"
 
 #: apps/kmixctrl.cpp:47
 #, kde-format
 msgid "(c) 2000 by Stefan Schimanski"
 msgstr "(c) 2000 by Stefan Schimanski"
 
 #: apps/kmixctrl.cpp:49 apps/main.cpp:58
 #, kde-format
 msgid "Stefan Schimanski"
 msgstr "Stefan Schimanski"
 
 #: apps/kmixctrl.cpp:55
 #, kde-format
 msgid "Save current volumes as default"
 msgstr "儲存目前音量為預設音量"
 
 #: apps/kmixctrl.cpp:57
 #, kde-format
 msgid "Restore default volumes"
 msgstr "回復到預設音量"
 
 #: apps/main.cpp:34
 #, kde-format
 msgid "KMix - KDE's full featured mini mixer"
 msgstr "KMix - KDE 的全功能小型混音器"
 
 #: apps/main.cpp:42
 #, kde-format
 msgid "KMix"
 msgstr "KMix"
 
 #: apps/main.cpp:44
 #, kde-format
 msgid "(c) 1996-2013 The KMix Authors"
 msgstr "(c) 1996-2013 KMix 作者群"
 
 #: apps/main.cpp:47
 #, kde-format
 msgid "Christian Esken"
 msgstr "Christian Esken"
 
 #: apps/main.cpp:47
 #, kde-format
 msgid "Original author and current maintainer"
 msgstr "原始作者，目前維護者"
 
 #: apps/main.cpp:48
 #, kde-format
 msgid "Colin Guthrie"
 msgstr "Colin Guthrie"
 
 #: apps/main.cpp:48
 #, kde-format
 msgid "PulseAudio support"
 msgstr "PulseAudio 支援"
 
 #: apps/main.cpp:49
 #, kde-format
 msgid "Helio Chissini de Castro"
 msgstr "Helio Chissini de Castro"
 
 #: apps/main.cpp:49
 #, kde-format
 msgid "ALSA 0.9x port"
 msgstr "ALSA 0.9x 移植"
 
 #: apps/main.cpp:50
 #, kde-format
 msgid "Brian Hanson"
 msgstr "Brian Hanson"
 
 #: apps/main.cpp:50
 #, kde-format
 msgid "Solaris support"
 msgstr "Solaris 支援"
 
 #. i18n("Helge Deller")      , i18n("HP/UX port"), "deller@gmx.de");
 #. The initial support was for ALSA 0.5. The new code is not based on it IIRC.
 #. i18n("Nick Lopez")        , i18n("Initial ALSA port"), "kimo_sabe@usa.net");
 #. Credit Policy: Authors who did a discrete part, like the Dataengine, OSD, help on specific platforms or soundcards.
 #: apps/main.cpp:57
 #, kde-format
 msgid "Igor Poboiko"
 msgstr "Igor Poboiko"
 
 #: apps/main.cpp:57
 #, kde-format
 msgid "Plasma Dataengine"
 msgstr "Plasma 資料引擎"
 
 #: apps/main.cpp:58
 #, kde-format
 msgid "Temporary maintainer"
 msgstr "暫時維護者"
 
 #: apps/main.cpp:59
 #, kde-format
 msgid "Sebestyen Zoltan"
 msgstr "Sebestyen Zoltan"
 
 #: apps/main.cpp:59 apps/main.cpp:60
 #, kde-format
 msgid "*BSD fixes"
 msgstr "*BSD 修正"
 
 #: apps/main.cpp:60
 #, kde-format
 msgid "Lennart Augustsson"
 msgstr "Lennart Augustsson"
 
 #: apps/main.cpp:61
 #, kde-format
 msgid "Nadeem Hasan"
 msgstr "Nadeem Hasan"
 
 #: apps/main.cpp:61
 #, kde-format
 msgid "Mute and volume preview, other fixes"
 msgstr "靜音與音量預覽，其他修正"
 
 #: apps/main.cpp:62
 #, kde-format
 msgid "Erwin Mascher"
 msgstr "Erwin Mascher"
 
 #: apps/main.cpp:62
 #, kde-format
 msgid "Improving support for emu10k1 based soundcards"
 msgstr "增進 emu10k1 系列的音效卡的支援"
 
 #: apps/main.cpp:63
 #, kde-format
 msgid "Valentin Rusu"
 msgstr "Valentin Rusu"
 
 #: apps/main.cpp:63
 #, kde-format
 msgid "TerraTec DMX6Fire support"
 msgstr "TerraTec DMX6Fire 支援"
 
 #: apps/main.cpp:77
 #, kde-format
 msgid ""
 "Inhibits the unhiding of the KMix main window, if KMix is already running."
 msgstr "若是 KMix 已在執行中，則禁止取消隱藏 KMix 主視窗。"
 
 #: apps/main.cpp:78
 #, kde-format
 msgid "Starts KMix in failsafe mode."
 msgstr "以安全模式啟動 KMix。"
 
 #: backends/mixer_alsa9.cpp:981
 #, kde-format
 msgid ""
 "You do not have permission to access the alsa mixer device.\n"
 "Please verify if all alsa devices are properly created."
 msgstr ""
 "您沒有足夠權限去存取 alsa 混音器裝置。\n"
 "請確認所有的 alsa 裝置均已正確建立。"
 
 #: backends/mixer_alsa9.cpp:985
 #, kde-format
 msgid ""
 "Alsa mixer cannot be found.\n"
 "Please check that the soundcard is installed and the\n"
 "soundcard driver is loaded.\n"
 msgstr ""
 "無法找到 Alsa 混音器。\n"
 "請確定音效卡已經安裝，音效卡的驅動程式亦已載入。\n"
 
 #: backends/mixer_backend.cpp:325
 #, kde-format
 msgid ""
 "kmix:You do not have permission to access the mixer device.\n"
 "Please check your operating systems manual to allow the access."
 msgstr ""
 "您沒有足夠權限去存取混音器裝置。\n"
 "請查看您的系統說明書如何可以存取這個裝置。"
 
 #: backends/mixer_backend.cpp:329
 #, kde-format
 msgid "kmix: Could not write to mixer."
 msgstr "kmix：無法將資料寫入混音器。"
 
 #: backends/mixer_backend.cpp:332
 #, kde-format
 msgid "kmix: Could not read from mixer."
 msgstr "kmix：無法從混音器讀取資料。"
 
 #: backends/mixer_backend.cpp:335
 #, kde-format
 msgid ""
 "kmix: Mixer cannot be found.\n"
 "Please check that the soundcard is installed and that\n"
 "the soundcard driver is loaded.\n"
 msgstr ""
 "kmix：無法找到混音器。\n"
 "請確定音效卡已經安裝及音效卡的\n"
 "驅動程式亦已載入。\n"
 
 #: backends/mixer_backend.cpp:340
 #, kde-format
 msgid "kmix: Unknown error. Please report how you produced this error."
 msgstr "kmix：不詳的錯誤。請匯報您如何做成這個錯誤。"
 
 #: backends/mixer_backend_i18n.cpp:24
 #, kde-format
 msgid "Recording level of the microphone input."
 msgstr "此麥克風輸入的紀錄等級"
 
 #: backends/mixer_backend_i18n.cpp:25
 #, kde-format
 msgid ""
 "Controls the volume of the front speakers or all speakers (depending on your "
 "soundcard model). If you use a digital output, you might need to also use "
 "other controls like ADC or DAC. For headphones, soundcards often supply a "
 "Headphone control."
 msgstr ""
 "控制前端喇叭或所有的喇叭（根據您的音效卡模組而定）的音量。若您使用數位輸出，"
 "您可能也需要使用其它的控制如 ADC 或 DAC。用耳麥的話，音效卡通常會提供耳麥的控"
 "制。"
 
 #: backends/mixer_backend_i18n.cpp:26
 #, kde-format
 msgid ""
 "Most media, such as MP3s or Videos, are played back using the PCM channel. "
 "As such, the playback volume of such media is controlled by both this and "
 "the Master or Headphone channels."
 msgstr ""
 "大部份媒體，如 MP3 或影片，都使用 PCM 聲道來播放。因此，這類媒體的回放音量是"
 "由 PCM 與主聲道（Master）或耳麥（Headphone）聲道控制。"
 
 #: backends/mixer_backend_i18n.cpp:27
 #, kde-format
 msgid ""
 "Controls the headphone volume. Some soundcards include a switch that must be "
 "manually activated to enable the headphone output."
 msgstr "控制耳麥（headphone）音量。有些音效卡會特別需要手動開啟耳麥輸出。"
 
 #: backends/mixer_backend_i18n.cpp:28
 #, kde-format
 msgid "---"
 msgstr "---"
 
 #: backends/mixer_mpris2.cpp:52 backends/mixer_pulse.cpp:1125
 #, kde-format
 msgid "Playback Streams"
 msgstr "播放串流"
 
 #: backends/mixer_oss.cpp:58
 #, kde-format
 msgid "Volume"
 msgstr "音量"
 
 #: backends/mixer_oss.cpp:58
 #, kde-format
 msgid "Bass"
 msgstr "低音"
 
 #: backends/mixer_oss.cpp:58
 #, kde-format
 msgid "Treble"
 msgstr "高音"
 
 #: backends/mixer_oss.cpp:59
 #, kde-format
 msgid "Synth"
 msgstr "合成音"
 
 #: backends/mixer_oss.cpp:59
 #, kde-format
 msgid "Pcm"
 msgstr "Pcm"
 
 #: backends/mixer_oss.cpp:59
 #, kde-format
 msgid "Speaker"
 msgstr "喇叭"
 
 #: backends/mixer_oss.cpp:60 backends/mixer_sun.cpp:74
 #, kde-format
 msgid "Microphone"
 msgstr "麥克風"
 
 #: backends/mixer_oss.cpp:60 backends/mixer_sun.cpp:76
 #, kde-format
 msgid "CD"
 msgstr "光碟"
 
 #: backends/mixer_oss.cpp:60
 #, kde-format
 msgid "Line"
 msgstr "線路"
 
 #: backends/mixer_oss.cpp:61
 #, kde-format
 msgid "Mix"
 msgstr "混音"
 
 #: backends/mixer_oss.cpp:61
 #, kde-format
 msgid "Pcm2"
 msgstr "Pcm2"
 
 #: backends/mixer_oss.cpp:61
 #, kde-format
 msgid "RecMon"
 msgstr "RecMon"
 
 #: backends/mixer_oss.cpp:62
 #, kde-format
 msgid "IGain"
 msgstr "IGain"
 
 #: backends/mixer_oss.cpp:62
 #, kde-format
 msgid "OGain"
 msgstr "OGain"
 
 #: backends/mixer_oss.cpp:62
 #, kde-format
 msgid "Line1"
 msgstr "線路1"
 
 #: backends/mixer_oss.cpp:63
 #, kde-format
 msgid "Line2"
 msgstr "線路2"
 
 #: backends/mixer_oss.cpp:63
 #, kde-format
 msgid "Line3"
 msgstr "線路3"
 
 #: backends/mixer_oss.cpp:63
 #, kde-format
 msgid "Digital1"
 msgstr "數位1"
 
 #: backends/mixer_oss.cpp:64
 #, kde-format
 msgid "Digital2"
 msgstr "數位2"
 
 #: backends/mixer_oss.cpp:64
 #, kde-format
 msgid "Digital3"
 msgstr "數位3"
 
 #: backends/mixer_oss.cpp:64
 #, kde-format
 msgid "PhoneIn"
 msgstr "PhoneIn"
 
 #: backends/mixer_oss.cpp:65
 #, kde-format
 msgid "PhoneOut"
 msgstr "PhoneOut"
 
 #: backends/mixer_oss.cpp:65
 #, kde-format
 msgid "Video"
 msgstr "影像"
 
 #: backends/mixer_oss.cpp:65
 #, kde-format
 msgid "Radio"
 msgstr "收音機"
 
 #: backends/mixer_oss.cpp:66
 #, kde-format
 msgid "Monitor"
 msgstr "Monitor"
 
 #: backends/mixer_oss.cpp:66
 #, kde-format
 msgid "3D-depth"
 msgstr "3D-depth"
 
 #: backends/mixer_oss.cpp:66
 #, kde-format
 msgid "3D-center"
 msgstr "3D-center"
 
 #: backends/mixer_oss.cpp:67 backends/mixer_oss.cpp:68 core/mixdevice.cpp:134
 #, kde-format
 msgid "unknown"
 msgstr "不詳"
 
 #: backends/mixer_oss.cpp:68
 #, kde-format
 msgid "unused"
 msgstr "未使用"
 
 #: backends/mixer_oss.cpp:234 backends/mixer_oss4.cpp:496
 #, kde-format
 msgid ""
 "kmix: You do not have permission to access the mixer device.\n"
 "Login as root and do a 'chmod a+rw /dev/mixer*' to allow the access."
 msgstr ""
 "kmix：您沒有足夠權限去存取混音器裝置。\n"
 "用 root 身份執行 'chmod a+rw /dev/mixer*' 令您可存取這個裝置。 "
 
 #: backends/mixer_oss.cpp:238
 #, kde-format
 msgid ""
 "kmix: Mixer cannot be found.\n"
 "Please check that the soundcard is installed and the\n"
 "soundcard driver is loaded.\n"
 "On Linux you might need to use 'insmod' to load the driver.\n"
 "Use 'soundon' when using commercial OSS."
 msgstr ""
 "kmix：無法找到混音器。\n"
 "請確定音效卡已經安裝及音效卡的\n"
 "驅動程式亦已載入。\n"
 "在 Linux 系統下可能需要執行 'insmod' 去載入驅動程式。\n"
 "當使用商業版的 OSS 時，需要執行 'soundon'"
 
 #: backends/mixer_oss4.cpp:500
 #, kde-format
 msgid ""
 "kmix: Mixer cannot be found.\n"
 "Please check that the soundcard is installed and the\n"
 "soundcard driver is loaded.\n"
 "On Linux you might need to use 'insmod' to load the driver.\n"
 "Use 'soundon' when using OSS4 from 4front."
 msgstr ""
 "kmix：無法找到混音器。\n"
 "請確定音效卡已經安裝及音效卡的\n"
 "驅動程式亦已載入。\n"
 "在 Linux 系統下可能需要執行 'insmod' 去載入驅動程式。\n"
 "當使用 4front 的 OSS4 時，需要執行 'soundon'"
 
 #: backends/mixer_pulse.cpp:341 backends/mixer_pulse.cpp:398
 #, kde-format
 msgid "Unknown Application"
 msgstr "未知的應用程式"
 
 #: backends/mixer_pulse.cpp:444
 #, kde-format
 msgid "Event Sounds"
 msgstr "事件聲音"
 
 #: backends/mixer_pulse.cpp:1109
 #, kde-format
 msgid "Playback Devices"
 msgstr "播放裝置"
 
 #: backends/mixer_pulse.cpp:1117
 #, kde-format
 msgid "Capture Devices"
 msgstr "抓取裝置"
 
 #: backends/mixer_pulse.cpp:1136
 #, kde-format
 msgid "Capture Streams"
 msgstr "抓取串流"
 
 #: backends/mixer_pulse.cpp:1228
 #, kde-format
 msgid "Volume Control Feedback Sound"
 msgstr "音量控制回饋音效"
 
 #: backends/mixer_sun.cpp:69
 #, kde-format
 msgid "Master Volume"
 msgstr "主音量"
 
 #: backends/mixer_sun.cpp:70
 #, kde-format
 msgid "Internal Speaker"
 msgstr "內建喇叭"
 
 #: backends/mixer_sun.cpp:71
 #, kde-format
 msgid "Headphone"
 msgstr "Headphone"
 
 #: backends/mixer_sun.cpp:72
 #, kde-format
 msgid "Line Out"
 msgstr "Line Out"
 
 #: backends/mixer_sun.cpp:73
 #, kde-format
 msgid "Record Monitor"
 msgstr "Record Monitor"
 
 #: backends/mixer_sun.cpp:75
 #, kde-format
 msgid "Line In"
 msgstr "Line In"
 
 #: backends/mixer_sun.cpp:241
 #, kde-format
 msgid ""
 "kmix: You do not have permission to access the mixer device.\n"
 "Ask your system administrator to fix /dev/audioctl to allow access."
 msgstr ""
 "kmix：您沒有足夠權限去存取混音器裝置。\n"
 "請向系統管理員要求存取這個裝置 /dev/audioctl。"
 
 #: core/volume.cpp:47
 #, kde-format
 msgctxt "Channel name"
 msgid "Left"
 msgstr "左"
 
 #: core/volume.cpp:48
 #, kde-format
 msgctxt "Channel name"
 msgid "Right"
 msgstr "右"
 
 #: core/volume.cpp:49
 #, kde-format
 msgctxt "Channel name"
 msgid "Center"
 msgstr "中"
 
 #: core/volume.cpp:50
 #, kde-format
 msgctxt "Channel name"
 msgid "Subwoofer"
 msgstr "重低音"
 
 #: core/volume.cpp:51
 #, kde-format
 msgctxt "Channel name"
 msgid "Surround Left"
 msgstr "環繞左"
 
 #: core/volume.cpp:52
 #, kde-format
 msgctxt "Channel name"
 msgid "Surround Right"
 msgstr "環繞右"
 
 #: core/volume.cpp:53
 #, kde-format
 msgctxt "Channel name"
 msgid "Side Left"
 msgstr "左側"
 
 #: core/volume.cpp:54
 #, kde-format
 msgctxt "Channel name"
 msgid "Side Right"
 msgstr "右側"
 
 #: core/volume.cpp:55
 #, kde-format
 msgctxt "Channel name"
 msgid "Rear Center"
 msgstr "後中"
 
 #: core/volume.cpp:57
 #, kde-format
 msgctxt "Channel name"
 msgid "Unknown"
 msgstr "未知"
 
 #: gui/dialogaddview.cpp:49
 #, kde-format
 msgid "All controls"
 msgstr "所有控制"
 
 #: gui/dialogaddview.cpp:50
 #, kde-format
 msgid "Only playback controls"
 msgstr "只有播放控制"
 
 #: gui/dialogaddview.cpp:51
 #, kde-format
 msgid "Only capture controls"
 msgstr "只有擷取控制"
 
 #: gui/dialogaddview.cpp:58
 #, kde-format
 msgid "Add View"
 msgstr "新增檢視"
 
 #: gui/dialogaddview.cpp:86
 #, kde-format
 msgid "Select mixer:"
 msgstr "選取混音器："
 
 #: gui/dialogaddview.cpp:107 gui/dialogselectmaster.cpp:88
 #, kde-format
 msgid "Current mixer"
 msgstr "目前混音器"
 
 #: gui/dialogaddview.cpp:114
 #, kde-format
 msgid "Select the design for the new view:"
 msgstr "選擇新檢視的設計："
 
 #: gui/dialogchoosebackends.cpp:64
 #, kde-format
 msgid "Mixers to show in the popup volume control:"
 msgstr "音量控制彈出視窗中的欲顯示等化器："
 
 #: gui/dialogchoosebackends.cpp:89
 #, kde-format
 msgid "Select Mixers"
 msgstr "選取混音器"
 
 #: gui/dialogselectmaster.cpp:39 gui/dialogselectmaster.cpp:144
 #, kde-format
 msgid "Select Master Channel"
 msgstr "選擇主聲道"
 
 #: gui/dialogselectmaster.cpp:68
 #, kde-format
 msgid "Current mixer:"
 msgstr "目前混音器："
 
 #: gui/dialogselectmaster.cpp:95
 #, kde-format
 msgid "Select the channel representing the master volume:"
 msgstr "選擇主音量的聲道："
 
 #: gui/dialogselectmaster.cpp:176
 #, kde-format
 msgid "Automatic (%1 recommendation)"
 msgstr "自動（%1 推薦）"
 
 #: gui/dialogviewconfiguration.cpp:135
 #, kde-format
 msgid "Configure Channels"
 msgstr "設定聲道"
 
 #: gui/dialogviewconfiguration.cpp:146
 #, kde-format
 msgid "Configure the visible channels. Drag icons between the lists to update."
 msgstr "設定可見聲道。拖曳圖示至列表以更新。"
 
 #: gui/dialogviewconfiguration.cpp:216
 #, kde-format
 msgid "Visible channels:"
 msgstr "可顯示聲道："
 
 #: gui/dialogviewconfiguration.cpp:219
 #, kde-format
 msgid "Available channels:"
 msgstr "可用的聲道："
 
 #: gui/dialogviewconfiguration.cpp:233
 #, kde-format
 msgid "Move the selected channel to the visible list"
 msgstr "移動選取的聲道至可見列表"
 
 #: gui/dialogviewconfiguration.cpp:241
 #, kde-format
 msgid "Move the selected channel to the available (hidden) list"
 msgstr "移動選取的頻道至支援（隱藏的）列表"
 
 #: gui/dialogviewconfiguration.cpp:281
 #, kde-format
 msgid "Show the selected channel"
 msgstr "顯示選取的聲道"
 
 #: gui/dialogviewconfiguration.cpp:282
 #, kde-format
 msgid "Hide the selected channel"
 msgstr "隱藏選取的聲道"
 
 #: gui/dialogviewconfiguration.cpp:283
 #, kde-format
 msgid "Visible channels"
 msgstr "可顯示聲道"
 
 #: gui/dialogviewconfiguration.cpp:284
 #, kde-format
 msgid "Available channels"
 msgstr "可用的聲道："
 
 #: gui/kmixdockwidget.cpp:58 gui/kmixprefdlg.cpp:80
 #, kde-format
 msgid "Volume Control"
 msgstr "音量控制"
 
 #: gui/kmixdockwidget.cpp:166
 #, kde-format
 msgid "M&ute"
 msgstr "靜音(&U)"
 
 #: gui/kmixdockwidget.cpp:197
 #, kde-format
 msgid "No mixer devices available"
 msgstr "沒有可用的混音裝置"
 
 #: gui/kmixdockwidget.cpp:205
 #, kde-format
 msgid "Volume muted"
 msgstr "音量靜音"
 
 #: gui/kmixdockwidget.cpp:206
 #, kde-format
 msgid "Volume at %1%"
 msgstr "音量 %1%"
 
 #: gui/kmixdockwidget.cpp:208
 #, kde-format
 msgid "%1 - %2"
 msgstr "%1 - %2"
 
 #: gui/kmixprefdlg.cpp:59
 #, kde-format
 msgid "Configure"
 msgstr "設定"
 
 #: gui/kmixprefdlg.cpp:78
 #, kde-format
 msgid "General"
 msgstr "一般"
 
 #: gui/kmixprefdlg.cpp:79
 #, kde-format
 msgid "Startup"
 msgstr "啟動"
 
 #: gui/kmixprefdlg.cpp:117
 #, kde-format
 msgid "Start KMix on desktop startup"
 msgstr "系統啟動時啟動 KMix"
 
 #: gui/kmixprefdlg.cpp:119
 #, kde-format
 msgid "Start KMix automatically when the desktop starts."
 msgstr "當系統開啟時，自動開啟 KMix。"
 
 #: gui/kmixprefdlg.cpp:122
 #, kde-format
 msgid ""
 "Autostart will not work, because the autostart file kmix_autostart.desktop "
 "is missing. Check that KMix is installed correctly."
 msgstr ""
 "Autostart 無法使用，因為 autostart 檔案 kmix_autostart.desktop遺失。檢查 "
 "KMix 是否安裝完整。"
 
 #: gui/kmixprefdlg.cpp:132
 #, kde-format
 msgid "Restore previous volume settings on desktop startup"
 msgstr "桌面啟動時還原到上一個音量設定"
 
 #: gui/kmixprefdlg.cpp:134
 #, kde-format
 msgid ""
 "Restore all mixer volume levels and switches to their last used settings "
 "when the desktop starts."
 msgstr "當桌面啟動時，重設所有的混音器音量等級並切換到其上次使用的設定。"
 
 #: gui/kmixprefdlg.cpp:137
 #, kde-format
 msgid ""
 "The volume of PulseAudio or MPRIS2 dynamic controls will not be restored."
 msgstr "PulseAudio 或 MPRIS2 動態控制的音量將不會還原。"
 
 #: gui/kmixprefdlg.cpp:154
 #, kde-format
 msgid "&Horizontal"
 msgstr "水平(&H)"
 
 #: gui/kmixprefdlg.cpp:155
 #, kde-format
 msgid "&Vertical"
 msgstr "垂直(&V)"
 
 #: gui/kmixprefdlg.cpp:197
 #, kde-format
 msgid "Behavior"
 msgstr "行為"
 
 #: gui/kmixprefdlg.cpp:202
 #, kde-format
 msgid "Volume feedback"
 msgstr "音量回饋"
 
 #: gui/kmixprefdlg.cpp:205
 #, kde-format
 msgid "Volume overdrive"
 msgstr "音量超規"
 
 #: gui/kmixprefdlg.cpp:206
 #, kde-format
 msgctxt "@info:tooltip"
 msgid "Raise the maximum volume to 150%"
 msgstr "將最大音量提升到 150%"
 
 #: gui/kmixprefdlg.cpp:209
 #, kde-format
 msgid "Volume feedback and volume overdrive are only available for PulseAudio."
 msgstr "音量回饋與音量超規只能在 PulseAudio 使用。"
 
 #: gui/kmixprefdlg.cpp:218
 #, kde-format
 msgid "KMix must be restarted for the Volume Overdrive setting to take effect."
 msgstr "音量超規設定需要將 KMix 重新啟動後才能生效。"
 
 #: gui/kmixprefdlg.cpp:228
 #, kde-format
 msgid "Visual"
 msgstr "可見"
 
 #: gui/kmixprefdlg.cpp:233
 #, kde-format
 msgid "Show &tickmarks"
 msgstr "顯示刻度(&T)"
 
 #: gui/kmixprefdlg.cpp:234
 #, kde-format
 msgid "Enable/disable tickmark scales on the sliders"
 msgstr "顯示/隱藏音量控制器的刻度"
 
 #: gui/kmixprefdlg.cpp:236
 #, kde-format
 msgid "Show &labels"
 msgstr "顯示標籤(&L)"
 
 #: gui/kmixprefdlg.cpp:237
 #, kde-format
 msgid "Enables/disables description labels above the sliders"
 msgstr "顯示/隱藏音量控制器上的標題"
 
 #: gui/kmixprefdlg.cpp:241
 #, kde-format
 msgid "Show On Screen Display (&OSD)"
 msgstr "顯示螢幕上字樣（OSD）(&O)"
 
 #: gui/kmixprefdlg.cpp:251
 #, kde-format
 msgid "Slider orientation (main window): "
 msgstr "滑動器方向（主視窗）："
 
 #: gui/kmixprefdlg.cpp:252
 #, kde-format
 msgid "Slider orientation (system tray popup):"
 msgstr "滑動器方向（系統匣彈出視窗）："
 
 #: gui/kmixprefdlg.cpp:263
 #, kde-format
 msgid "Dock in system tray"
 msgstr "嵌入在系統匣內"
 
 #: gui/kmixprefdlg.cpp:265
 #, kde-format
 msgid ""
 "Dock the mixer into the system tray. Click on it to open the popup volume "
 "control."
 msgstr "於系統匣嵌入混音器。點擊它以開啟音量控制彈出視窗。"
 
 #: gui/mdwenum.cpp:55
 #, kde-format
 msgid "&Hide"
 msgstr "隱藏(&H)"
 
 #: gui/mdwenum.cpp:58
 #, kde-format
 msgid "C&onfigure Shortcuts..."
 msgstr "設定捷徑(&O)..."
 
 #: gui/mdwslider.cpp:102
-#, fuzzy, kde-format
+#, kde-format
 #| msgid "&Split Channels"
 msgid "Split Channels"
-msgstr "分開聲道(&S)"
+msgstr "分割聲道"
 
 #: gui/mdwslider.cpp:121 gui/mdwslider.cpp:641
 #, kde-format
 msgid "Capture"
 msgstr "抓取"
 
 #: gui/mdwslider.cpp:126
-#, fuzzy, kde-format
+#, kde-format
 #| msgid "Capture Devices"
 msgid "Use Device"
-msgstr "抓取裝置"
+msgstr "使用裝置"
 
 #: gui/mdwslider.cpp:131
 #, kde-format
 msgid "Channel Shortcuts..."
 msgstr "頻道快捷鍵..."
 
 #: gui/mdwslider.cpp:180
 #, kde-format
 msgid "Toggle Mute"
 msgstr "切換靜音"
 
 #: gui/mdwslider.cpp:339
 #, kde-format
 msgctxt "%1=channel"
 msgid "Capture/Uncapture %1"
 msgstr "擷取/取消擷取 %1"
 
 #: gui/mdwslider.cpp:340
 #, kde-format
 msgctxt "%1=channel"
 msgid "Mute/Unmute %1"
 msgstr "靜音/取消靜音 %1"
 
 #: gui/mdwslider.cpp:344 gui/mdwslider.cpp:345 gui/mdwslider.cpp:346
 #, kde-format
 msgctxt "%1=device %2=channel"
 msgid ""
 "%1\n"
 "%2"
 msgstr ""
 "%1\n"
 "%2"
 
 #: gui/mdwslider.cpp:675
 #, kde-format
 msgid "%1 (capture)"
 msgstr "%1（抓取）"
 
 #: gui/mdwslider.cpp:1197
-#, fuzzy, kde-format
+#, kde-format
 #| msgid "Automatic According to Category"
 msgid "Automatic (according to category)"
-msgstr "根據類別決定"
+msgstr "自動（根據類別決定）"
 
 #: gui/viewbase.cpp:97
 #, kde-format
 msgid "Configure this view"
 msgstr "設定顯示"
 
 #: gui/viewbase.cpp:167
 #, kde-format
 msgid "Configure Channels..."
 msgstr "設定頻道..."
 
 #: gui/viewbase.cpp:220
 #, kde-format
 msgid "Device Settings"
 msgstr "裝置設定"
 
 #: gui/viewdockareapopup.cpp:364
 #, kde-format
 msgid "Show the full mixer window"
 msgstr "顯示完整混音器視窗"
 
 #: gui/viewdockareapopup.cpp:401
 #, kde-format
 msgid "Load volume profile %1"
 msgstr "載入音量設定檔 %1"
 
 #: gui/viewsliders.cpp:180
 #, kde-format
 msgid "Nothing is playing audio."
 msgstr "並未播放音效。"
 
 #: gui/viewsliders.cpp:183
 #, kde-format
 msgid "Nothing is capturing audio."
 msgstr "並未擷取音效。"
 
 #: gui/viewsliders.cpp:184
 #, kde-format
 msgid "There are no capture devices."
 msgstr "沒有擷取裝置。"
 
 #: gui/viewsliders.cpp:185
 #, kde-format
 msgid "There are no playback devices."
 msgstr "沒有回放裝置。"
 
 #~ msgid "Hardware &Information"
 #~ msgstr "硬體資訊(&I)"
 
 #~ msgid "Mixer Hardware Information"
 #~ msgstr "混音器硬體資訊"
 
 #~ msgid "Sound drivers supported:"
 #~ msgstr "支援的音效驅動程式："
 
 #~ msgid "Sound drivers used:"
 #~ msgstr "使用的音效驅動程式："
 
 #~ msgid "Experimental multiple-Driver mode activated"
 #~ msgstr "已啟動實驗性質多重驅動模式"
 
 #~ msgid "&Muted"
 #~ msgstr "靜音(&M)"
 
 #~ msgid "Captu&re"
 #~ msgstr "擷取(&R)"
 
 #~ msgid "Mo&ve"
 #~ msgstr "移動(&V)"