msgid "&dolphin; is the default file manager by &kde;, designed with usability as a primary focus."
msgstr ""
#. Tag: keyword
#. +> trunk5 stable5
#: index.docbook:83
#, no-c-format
msgid "<keyword>KDE</keyword>"
msgstr ""
#. Tag: keyword
#. +> trunk5 stable5
#: index.docbook:84
#, no-c-format
msgid "Dolphin"
msgstr ""
#. Tag: keyword
#. +> trunk5 stable5
#: index.docbook:85
#, no-c-format
msgid "Filemanager"
msgstr ""
#. Tag: keyword
#. +> trunk5 stable5
#: index.docbook:86
#, no-c-format
msgid "file"
msgstr ""
#. Tag: keyword
#. +> trunk5 stable5
#: index.docbook:87
#, no-c-format
msgid "management"
msgstr ""
#. Tag: title
#. +> trunk5 stable5
#: index.docbook:93
#, no-c-format
msgid "Introduction"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:95
#, no-c-format
msgid "&dolphin; is &plasma;'s default file manager. It aims to improve usability at the user interface level. &dolphin; focuses only on being a file manager whereas &konqueror;, which was &kde;'s default file manager in &kde; 3 and can still be used for file management, is a universal viewer for many file types."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:102
#, no-c-format
msgid "This design approach allows the developers to concentrate on optimizing the user interface for the specific task of file management."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:107
#, no-c-format
msgid "Please report any problems or feature requests to the &dolphin; author via the bug report dialog. This is accessible either from the <guibutton>Control</guibutton> button at the right of the toolbar in the default mode without menubar; or from <menuchoice><guimenu>Help</guimenu><guimenuitem>Report Bug...</guimenuitem></menuchoice> menu of the application, if the menubar is shown."
msgstr ""
#. Tag: title
#. +> trunk5 stable5
#: index.docbook:118
#, no-c-format
msgid "Using &dolphin;"
msgstr ""
#. Tag: title
#. +> trunk5 stable5
#: index.docbook:121
#, no-c-format
msgid "&dolphin; User Interface"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:123
#, no-c-format
msgid "The screenshot below shows &dolphin;'s default user interface:"
msgstr ""
#. Tag: screeninfo
#. +> trunk5 stable5
#: index.docbook:128
#, no-c-format
msgid "Screenshot of &dolphin;'s default user interface"
msgstr ""
#. Tag: phrase
#. +> trunk5 stable5
#: index.docbook:134
#, no-c-format
msgid "<phrase>&dolphin;'s default user interface.</phrase>"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:136
#, no-c-format
msgid "<para>&dolphin;'s default user interface.</para>"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:140
#, no-c-format
msgid "The elements of the default user interface are:"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:145
#, no-c-format
msgid "The toolbar, which can be used for quick access to frequently used actions. The toolbar can be customized by clicking it with the &RMB; and choosing <menuchoice><guimenuitem>Configure Toolbars...</guimenuitem></menuchoice> from the context menu, with <guimenuitem>Configure Toolbars...</guimenuitem> from the <guibutton>Control</guibutton> button at the right of the toolbar or via <menuchoice><guimenu>Settings</guimenu> <guimenuitem>Configure Toolbars...</guimenuitem></menuchoice> from the main menu."
msgid "Toolbar items where the icon is sufficient for knowing the command do not have text alongside the icons. This can be changed by a &RMB; click and selecting the item text below <guilabel>Show Text</guilabel>. The <guibutton>Control</guibutton> button at the right side of the toolbar is only displayed if the menubar is hidden."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:176
#, no-c-format
msgid "The location bar, which always displays the path to the current folder. It can be switched between two different modes, see the <link linkend=\"location-bar\">section on the location bar</link> for details."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:182
#, no-c-format
msgid "The <link linkend=\"dolphin-view\">view</link>, which shows all files and folders in the current folder."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:187
#, no-c-format
msgid "The <link linkend=\"places-panel\"><guilabel>Places</guilabel> panel</link>, which provides quick access to bookmarked locations and disks or other media."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:191
#, no-c-format
msgid "If desktop search and file indexing are enabled in the <guilabel>Desktop Search</guilabel> module in the &systemsettings; the panel provides <guilabel>Recent</guilabel> items and allows you to search for <guilabel>Documents</guilabel>, <guilabel>Images</guilabel>, <guilabel>Audio Files</guilabel> and <guilabel>Video</guilabel>."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:197
#, no-c-format
msgid "The status bar. It displays the name, size and type of the file which is currently hovered over with the mouse, or the number and size of the files which are selected. At the right, there is a zoom slider that allows you to adjust the size of the icons in the view."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:204
#, no-c-format
msgid "The menubar (hidden by default), which provides access to all commands and configuration options. See the <link linkend=\"commands-menubar\">Command Reference</link> for a list of all menu commands. The menubar can be toggled with <guimenuitem>Show Menubar</guimenuitem> (<keycombo action=\"simul\">&Ctrl;<keycap>M</keycap></keycombo>) from the <guimenu>Settings</guimenu> menu or the <guibutton>Control</guibutton> button."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:211
#, no-c-format
msgid "If the menubar is hidden, all its actions are available from the <guibutton>Control</guibutton> button."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:215
#, no-c-format
msgid "The additional <guilabel>Information</guilabel>, <guilabel>Folders</guilabel> and <guilabel>Terminal</guilabel> panels are hidden by default, for more information see <link linkend=\"panels\"><guilabel>Panels</guilabel>.</link>"
msgstr ""
#. Tag: title
#. +> trunk5 stable5
#: index.docbook:228
#, no-c-format
msgid "The &dolphin; View"
msgstr ""
#. Tag: title
#. +> trunk5 stable5
#: index.docbook:231
#, no-c-format
msgid "Using the View"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:233
#, no-c-format
msgid "The view displays all files and folders in the current folder. These items can be accessed or manipulated in different ways:"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:239
#, no-c-format
msgid "A file or folder can be opened by clicking it with the &LMB; (or double-clicking, if <guilabel>Double-click to open files and folders</guilabel> is enabled in the &systemsettings; in the <menuchoice><guimenu>Input Devices</guimenu> <guimenuitem>Mouse</guimenuitem></menuchoice> module."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:246
#, no-c-format
msgid "Clicking any item or the white area around the items with the &RMB; opens a context menu which provides access to many frequently used actions for the item or the current folder, respectively."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:252
#, no-c-format
msgid "If the &LMB; is pressed on an item, but not immediately released, the item can be dragged and dropped in another folder in the current view or in another &dolphin; view (in another &dolphin; window or in the same window if the view is split, see below) to move or copy it or to create a symbolic link. Items can even be dropped in another application to open them in that application."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:261
#, no-c-format
msgid "&dolphin; remembers the history of visited folders. To navigate backward or forward in the history, the corresponding buttons in the toolbar can be used:"
msgstr ""
#. Tag: phrase
#. +> trunk5 stable5
#: index.docbook:273
#, no-c-format
msgid "The Back and Forward buttons in the toolbar."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:276
#, no-c-format
msgid "The <guibutton>Back</guibutton> and <guibutton>Forward</guibutton> buttons in the toolbar can be used to navigate in the history."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:284
#, no-c-format
msgid "If you click with the &MMB; the item in the history is opened in a new tab thus keeping the current tab with its content."
msgstr ""
#. Tag: title
#. +> trunk5 stable5
#: index.docbook:290
#, no-c-format
msgid "&dolphin; View Appearance"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:292
#, no-c-format
msgid "The toolbar contains buttons to control the appearance of the view:"
msgstr ""
#. Tag: phrase
#. +> trunk5 stable5
#: index.docbook:303
#, no-c-format
msgid "<phrase>The buttons in the toolbar which control the appearance of the view.</phrase>"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:305
#, no-c-format
msgid "<para>The buttons in the toolbar which control the appearance of the view.</para>"
msgstr ""
#. Tag: para
#. +> trunk5
#: index.docbook:311
#, no-c-format
msgid "All the settings discussed below and other options concerning, ⪚ the sorting of the files in the current folder, can also be modified in the <guimenu>View</guimenu> menu and in the <link linkend=\"view-properties-dialog\">View Display Style dialog</link>. By default, these settings are remembered for each folder separately. This behavior can be changed in the <link linkend=\"preferences-dialog-general\"><quote>General</quote></link> section of the settings."
msgstr ""
#. Tag: para
#. +> stable5
#: index.docbook:311
#, no-c-format
msgid "All the settings discussed below and other options concerning, ⪚ the sorting of the files in the current folder, can also be modified in the <guimenu>View</guimenu> menu and in the <link linkend=\"view-properties-dialog\">View Properties dialog</link>. By default, these settings are remembered for each folder separately. This behavior can be changed in the <link linkend=\"preferences-dialog-general\"><quote>General</quote></link> section of the settings."
msgstr ""
#. Tag: title
#. +> trunk5 stable5
#: index.docbook:322 index.docbook:1188
#, no-c-format
msgid "View Modes"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:324
#, no-c-format
msgid "The first three buttons in the above screenshot switch between &dolphin;'s view modes."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:330
#, no-c-format
msgid "In the <guibutton>Icons</guibutton> view, which is the default, files will be represented by an icon that visualizes the file type, and a folder icon will be shown for subfolders. The names of folders and files, and the items enabled in <menuchoice><guimenu>View</guimenu><guisubmenu>Additional Information</guisubmenu></menuchoice>, are displayed below the icons."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:338
#, no-c-format
msgid "The <guilabel>Compact</guilabel> view shows the folder contents as icons with the name beside it and the items enabled in <menuchoice><guimenu>View</guimenu><guisubmenu>Additional Information</guisubmenu></menuchoice> below the name. The items are grouped in columns similar to the <guilabel>Short View</guilabel> in the &kde; file dialog."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:346
#, no-c-format
msgid "In the <guibutton>Details</guibutton> view, the folder contents are displayed as a detailed list which contains the name, size and last modification time of each item. Additional columns can be added by clicking a column header with the &RMB;."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:352
#, no-c-format
msgid "In the context menu of the header line you can choose between custom or automatic column width. Automatic width adjusts the width of all columns once to display the longest item in the column completely, except for the <guilabel>Name</guilabel> column where the extension is replaced by <quote>...</quote>"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:357
#, no-c-format
msgid "The order of columns can be changed by drag and drop of column headers, except for the <guilabel>Name</guilabel> header, which is always the first column in this view."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:360
#, no-c-format
msgid "The details view allows you to view the current folder in a tree-like fashion if <link linkend=\"preferences-dialog-viewmodes-details\"> <guilabel>Expandable folders</guilabel></link> are enabled: Each subfolder of the current folder can be <quote>expanded</quote> or <quote>collapsed</quote> by clicking on the <guiicon>></guiicon> or <guiicon>v</guiicon> icon next to it."
msgstr ""
#. Tag: screeninfo
#. +> trunk5 stable5
#: index.docbook:371
#, no-c-format
msgid "<screeninfo>Grouped View</screeninfo>"
msgstr ""
#. Tag: phrase
#. +> trunk5 stable5
#: index.docbook:377
#, no-c-format
msgid "<phrase>Grouped View</phrase>"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:379
#, no-c-format
msgid "All view modes support grouping by the sort type selected in <menuchoice><guimenu>View</guimenu><guisubmenu>Sort by</guisubmenu></menuchoice>"
msgstr ""
#. Tag: title
#. +> trunk5 stable5
#: index.docbook:388
#, no-c-format
msgid "Information in the View"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:389
#, no-c-format
msgid "In all view modes &dolphin; shows at least an icon and a name for each item. Using <guisubmenu>Additional Information</guisubmenu> in the <guimenu>View</guimenu> menu or the context menu of the header in <guilabel>Details</guilabel> mode, you can select more information for each item to be shown:"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:396
#, no-c-format
msgid "<guimenuitem>Size</guimenuitem>, <guimenuitem>Date</guimenuitem>, <guimenuitem>Type</guimenuitem>, <guimenuitem>Rating</guimenuitem>, <guimenuitem>Tags</guimenuitem> or <guimenuitem>Comment</guimenuitem>."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:402
#, no-c-format
msgid "Depending on the file type, additionally, sorting criteria can be selected:"
msgstr ""
#. Tag: member
#. +> trunk5 stable5
#: index.docbook:404
#, no-c-format
msgid "<guimenuitem>Document</guimenuitem>: Number of words and lines"
msgstr ""
#. Tag: member
#. +> trunk5 stable5
#: index.docbook:405
#, no-c-format
msgid "<guimenuitem>Image</guimenuitem>: Size and orientation"
msgstr ""
#. Tag: member
#. +> trunk5 stable5
#: index.docbook:406
#, no-c-format
msgid "<guimenuitem>Audio</guimenuitem>: Artist, album, duration and track"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:410
#, no-c-format
msgid "The <guisubmenu>Other</guisubmenu> submenu allows you to select <guimenuitem>Path</guimenuitem>, <guimenuitem>Link Destination</guimenuitem>, <guimenuitem>Copied From</guimenuitem>, <guimenuitem>Permissions</guimenuitem>, <guimenuitem>Owner</guimenuitem> or <guimenuitem>User Group</guimenuitem>."
msgstr ""
#. Tag: title
#. +> trunk5 stable5
#: index.docbook:420
#, no-c-format
msgid "Preview"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:422
#, no-c-format
msgid "If <guibutton>Preview</guibutton> is enabled, the icons are based on the actual file or folder contents; ⪚ for images a scaled down preview of the image is shown."
msgstr ""
#. Tag: title
#. +> trunk5 stable5
#: index.docbook:431
#, no-c-format
msgid "Split"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:433
#, no-c-format
msgid "If <guibutton>Split</guibutton> is clicked, two views are shown which can display the contents of different folders. This can be convenient for moving or copying files."
msgstr ""
#. Tag: title
#. +> trunk5 stable5
#: index.docbook:444
#, no-c-format
msgid "Selecting Items in the View"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:446
#, no-c-format
msgid "There are several ways to select items in the view. Once a group of items is selected, all actions, such as <menuchoice><guimenuitem>Cut</guimenuitem></menuchoice>, <menuchoice><guimenuitem>Copy</guimenuitem></menuchoice>, <menuchoice><guimenuitem>Move to Trash</guimenuitem></menuchoice>, and drag and drop operations, affect all selected items."
msgstr ""
#. Tag: title
#. +> trunk5 stable5
#: index.docbook:456
#, no-c-format
msgid "Selecting Items Using the Mouse"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:460
#, no-c-format
msgid "You can press the &LMB; somewhere in the view and draw a rectangle around a group of items before releasing the button. This will select all items in the rectangle and clear the previous selection. If the &Shift; key is pressed during the selection process, the previous selection is kept."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:467
#, no-c-format
msgid "If the &Ctrl; key is pressed while an item is clicked with the &LMB;, the selection state of this item is toggled. If the &Ctrl; key is pressed while a rectangle is drawn around a group of items as described above, the selection state of all items in the rectangle will be toggled."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:474
#, no-c-format
msgid "If the &Shift; key is pressed while an item is clicked with the &LMB;, all items between the previous current item and the clicked item will be selected."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:479
#, no-c-format
msgid "If <guilabel>Show selection marker</guilabel> is enabled in the <link linkend=\"preferences-dialog-general-behavior\"><quote>Behavior</quote> tab of the <guilabel>General</guilabel> section of the settings</link>, a small <guiicon>+</guiicon> or <guiicon>-</guiicon> button appears in the top left corner of the item which is currently hovered over with the mouse. Clicking this sign selects or deselects the item, respectively."
msgstr ""
#. Tag: title
#. +> trunk5 stable5
#: index.docbook:493
#, no-c-format
msgid "Selecting Items Using the Keyboard"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:497
#, no-c-format
msgid "If an arrow key, <keycap>Page Up</keycap>, <keycap>Page Down</keycap>, <keycap>Home</keycap>, or <keycap>End</keycap> is pressed, the new current item is selected, and the previous selection is cleared."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:503
#, no-c-format
msgid "If the &Ctrl; key is held while one of the above keys is pressed, the selection remains unchanged."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:508
#, no-c-format
msgid "If the &Shift; key is held while one of the above keys is pressed, all items between the previous current item and the new current item will be selected."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:513
#, no-c-format
msgid "If <keycombo action=\"simul\">&Ctrl;<keysym>Space</keysym></keycombo> is pressed, the selection state of the current item is toggled."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:518
#, no-c-format
msgid "<keycombo action=\"simul\">&Ctrl;<keycap>A</keycap></keycombo> selects all items in the view."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:523
#, no-c-format
msgid "<keycombo action=\"simul\">&Ctrl;&Shift;<keycap>A</keycap></keycombo> toggles the selection state of all items in the view."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:528
#, no-c-format
msgid "Select a file or folder by typing the first few letters of its name and the first matching item is selected. To clear the selection and cancel the keyboard search press &Esc; or wait longer than the timeout of 1 second."
msgstr ""
#. Tag: title
#. +> trunk5 stable5
#: index.docbook:546
#, no-c-format
msgid "Location Bar"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:548
#, no-c-format
msgid "The location bar, which can be found above &dolphin;'s view, displays the path to the current folder. The location bar has two modes."
msgstr ""
#. Tag: title
#. +> trunk5 stable5
#: index.docbook:554
#, no-c-format
msgid "Bread Crumb Mode"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:556
#, no-c-format
msgid "In the <quote>bread crumb</quote> mode, which is the default, each folder name in the path to the current folder is a button which can be clicked to quickly open that folder. Moreover, clicking the <quote>></quote> sign to the right of a folder opens a menu which allows you to quickly open a subfolder of that folder."
msgstr ""
#. Tag: screeninfo
#. +> trunk5 stable5
#: index.docbook:564
#, no-c-format
msgid "Screenshot of the location bar in bread crumb mode"
msgstr ""
#. Tag: phrase
#. +> trunk5 stable5
#: index.docbook:570
#, no-c-format
msgid "<phrase>Location bar in bread crumb mode.</phrase>"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:572
#, no-c-format
msgid "<para>Location bar in bread crumb mode.</para>"
msgstr ""
#. Tag: title
#. +> trunk5 stable5
#: index.docbook:579
#, no-c-format
msgid "Editable Mode"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:581
#, no-c-format
msgid "When in bread crumb mode, clicking in the gray area to the right of the path with the &LMB; switches the location bar to <quote>editable</quote> mode, in which the path can be edited using the keyboard. To switch back to bread crumb mode, click the check mark at the right of the location bar with the &LMB;."
msgstr ""
#. Tag: screeninfo
#. +> trunk5 stable5
#: index.docbook:589
#, no-c-format
msgid "Screenshot of the location bar in editable mode"
msgstr ""
#. Tag: phrase
#. +> trunk5 stable5
#: index.docbook:595
#, no-c-format
msgid "<phrase>Location bar in editable mode.</phrase>"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:597
#, no-c-format
msgid "<para>Location bar in editable mode.</para>"
msgstr ""
#. Tag: title
#. +> trunk5 stable5
#: index.docbook:602
#, no-c-format
msgid "Using Kioslaves"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:604
#, no-c-format
msgid "If the location bar is empty in editable mode, a drop down box appears in front of the bar listing all available kioslaves on your system. Kioslaves are programs built into &kde; which add support for many different protocols to &dolphin; and other &kde; applications."
msgstr ""
#. Tag: para
-#. +> trunk5 stable5
+#. +> trunk5
+#: index.docbook:609
+#, no-c-format
+msgid "For example with the <quote>fish</quote> kioslave &dolphin; can be used to manage files and folders on a remote host that is accessible via <acronym>SSH</acronym>. To do this you would type <userinput>fish://username@remotehost</userinput> into the location bar. Similar remote file management can be done on remote hosts accessible via the &FTP;, &NFS;, SFTP, &SMB; (&CIFS;) or webdav protocols."
+msgstr ""
+
+#. Tag: para
+#. +> stable5
#: index.docbook:609
#, no-c-format
msgid "For example with the <quote>fish</quote> kioslave &dolphin; can be used to manage files and folders on a remote host that is accessible via <acronym>SSH</acronym>. To do this you would type <userinput>fish://username@remotehost</userinput> into the location bar. Similar remote file management can be done on remote hosts accessible via the &FTP;, NFS, SFTP, SMB (CIFS) or webdav protocols."
msgstr ""
#. Tag: para
-#. +> trunk5 stable5
+#. +> trunk5
+#: index.docbook:615
+#, no-c-format
+msgid "It is also possible to use the kioslaves drop down box to access &systemsettings;, fonts, trash, other programs and devices attached to your computer. See the drop down box for the full list of capabilities available from kioslaves on your system."
+msgstr ""
+
+#. Tag: para
+#. +> stable5
#: index.docbook:615
#, no-c-format
msgid "It is also possible to use the kioslaves drop down list to access &systemsettings;, fonts, trash, other programs and devices attached to your computer. See the drop down list for the full list of capabilities available from kioslaves on your system."
msgstr ""
#. Tag: screeninfo
#. +> trunk5 stable5
#: index.docbook:620
#, no-c-format
msgid "Screenshot of the list of kioslaves"
msgstr ""
#. Tag: phrase
#. +> trunk5 stable5
#: index.docbook:626
#, no-c-format
msgid "Location bar showing list of available kioslaves."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:628
#, no-c-format
msgid "List of available kioslaves."
msgstr ""
#. Tag: title
#. +> trunk5 stable5
#: index.docbook:636
#, no-c-format
msgid "Places and Context"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:638
#, no-c-format
msgid "If the <guilabel>Places</guilabel> panel is hidden; in both modes an additional icon in front of the path is displayed. This icon can be clicked with the &LMB; to open a menu which offers quick access to <quote>places</quote> and storage media. See the <link linkend=\"places-panel\">section about the Places Panel</link> for details."
msgstr ""
#. Tag: screeninfo
#. +> trunk5 stable5
#: index.docbook:646
#, no-c-format
msgid "<screeninfo>Location bar with Places icon</screeninfo>"
msgstr ""
#. Tag: phrase
#. +> trunk5 stable5
#: index.docbook:652
#, no-c-format
msgid "<phrase>Location bar with Places icon</phrase>"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:657
#, no-c-format
msgid "The context menu of the location bar offers actions to switch between the modes and to copy and paste the path using the clipboard. Check the last option in this context menu to display either the full path starting with the root folder of the file system or to display the path starting with the current places entry."
msgstr ""
#. Tag: screeninfo
#. +> trunk5 stable5
#: index.docbook:664
#, no-c-format
msgid "<screeninfo>Location bar context menu</screeninfo>"
msgstr ""
#. Tag: phrase
#. +> trunk5 stable5
#: index.docbook:670
#, no-c-format
msgid "<phrase>Location bar context menu</phrase>"
msgstr ""
#. Tag: title
#. +> trunk5 stable5
#: index.docbook:680
#, no-c-format
msgid "Panels"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:682
#, no-c-format
msgid "&dolphin; allows a number of panels to be placed next to the view. These can be enabled in <menuchoice><guimenu>View</guimenu><guisubmenu>Show Panels</guisubmenu></menuchoice>. By unlocking the panels and clicking and dragging a panel title, the panel can be moved to a different position, even outside the window."
msgstr ""
#. Tag: title
#. +> trunk5 stable5
#: index.docbook:690
#, no-c-format
msgid "Places"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:694
#, no-c-format
msgid "The <guilabel>Places</guilabel> panel is located at the left of the window by default. The <guilabel>Places</guilabel> panel shows any locations you have bookmarked. It also shows any disk or media attached to the computer, recently accessed items and allows you to search for certain type of files. The order of these entries can be changed by drag and drop."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:701
#, no-c-format
msgid "The easiest way to add a folder to the <guilabel>Places</guilabel> panel is to drag it and drop it in the panel. Moreover, you can click inside the panel with the &RMB; and choose <menuchoice><guimenuitem>Add Entry...</guimenuitem></menuchoice> from the context menu. The first procedure creates a system wide bookmark, the second procedure can be used to add the current path of the location bar or any desired folder or device. A dialog opens where label, location and icon can be edited and the usage of this entry can be restricted to &dolphin;."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:711
#, no-c-format
msgid "A &RMB; click opens the context menu to edit, add, hide or remove entries and change the icon size to one of the predefined values or lock/unlock the panels."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:714
#, no-c-format
msgid "The context menu has an action to open the entry in a new tab. Devices can be unmounted using the context menu."
msgstr ""
#. Tag: title
#. +> trunk5 stable5
#: index.docbook:720
#, no-c-format
msgid "Information"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:722
#, no-c-format
msgid "The <guilabel>Information</guilabel> panel shows extended information about the selected items(s) or about the current folder or the file which is currently hovered over with the mouse, including size, type, and date of last modification. It also features a large preview of the selected item and allows you to assign a rating, tags, and comments to it."
msgstr ""
#. Tag: title
#. +> trunk5 stable5
#: index.docbook:733
#, no-c-format
msgid "Folders"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:735
#, no-c-format
msgid "The <guilabel>Folders</guilabel> panel shows a tree view structure of the file system. It only shows folders. Clicking a folder with the &LMB; opens this folder in the &dolphin; view."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:740
#, no-c-format
msgid "Use <guilabel>Limit to Home Directory</guilabel> to hide all folders from the tree view except your <guilabel>Home</guilabel>."
msgstr ""
#. Tag: title
#. +> trunk5 stable5
#: index.docbook:746
#, no-c-format
msgid "Terminal"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:748
#, no-c-format
msgid "This panel contains a terminal. The terminal will open at the folder currently shown in the &dolphin; view. Changing the folder in the active &dolphin; view will update the working folder of the terminal. Changing the directory in the terminal will update the working folder in the &dolphin; view. The terminal only works with local media."
msgstr ""
#. Tag: title
#. +> trunk5 stable5
#: index.docbook:761
#, no-c-format
msgid "Quick Tips"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:763
#, no-c-format
msgid "The following are a number of tips to save time when using &dolphin;."
msgstr ""
#. Tag: title
#. +> trunk5 stable5
#: index.docbook:768
#, no-c-format
msgid "Quick Bookmarking"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:770
#, no-c-format
msgid "To quickly create a bookmark in the <guilabel>Places</guilabel> panel for the current folder, &RMB; click in the work space and click <menuchoice><guimenuitem>Add to Places</guimenuitem></menuchoice> in the context menu."
msgstr ""
#. Tag: title
#. +> trunk5 stable5
#: index.docbook:779
#, no-c-format
msgid "Finding Files and Searching in Files"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:782
#, no-c-format
msgid "&dolphin; is capable of searching for files and for content in files. If <keycombo action=\"simul\"> &Ctrl;<keycap>F</keycap></keycombo> is pressed or <menuchoice> <guimenu>Edit</guimenu> <guimenuitem>Search...</guimenuitem> </menuchoice> is used, the <guilabel>Search</guilabel> bar will open already set up to search for files within the current folder and any sub-folders. Start to type into the find input box and the search starts immediately."
msgstr ""
#. Tag: screeninfo
#. +> trunk5 stable5
#: index.docbook:789
#, no-c-format
msgid "<screeninfo>Search files and for content in files</screeninfo>"
msgstr ""
#. Tag: phrase
#. +> trunk5 stable5
#: index.docbook:795
#, no-c-format
msgid "<phrase>Search files and for content in files</phrase>"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:797
#, no-c-format
msgid "&dolphin; searching files and for content in files."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:801
#, no-c-format
msgid "The search is case insensitive, and does not require surrounding wildcards (<userinput>*foo*</userinput> and <userinput>foo</userinput> are equivalent), but you can use wildcards inside the search term. <userinput>*</userinput> will match zero or more characters, <userinput>?</userinput> only one single character."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:805
#, no-c-format
msgid "This feature can be used with running Baloo services; without these services a KIOSlave is launched to provide the search results."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:807
#, no-c-format
msgid "The option from <guilabel>Everywhere</guilabel> with activated Baloo services searches in all indexed folders, without Baloo this option starts the search from the user's <replaceable>Home</replaceable> folder."
msgstr ""
#. Tag: screeninfo
#. +> trunk5 stable5
#: index.docbook:811
#, no-c-format
msgid "<screeninfo>Search with More Options</screeninfo>"
msgstr ""
#. Tag: phrase
#. +> trunk5 stable5
#: index.docbook:817
#, no-c-format
msgid "<phrase>Search with More Options</phrase>"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:819
#, no-c-format
msgid "&dolphin; searching with More Options."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:823
#, no-c-format
msgid "Use the <guilabel>More Options</guilabel> button to extend the <guilabel>Search</guilabel> bar. This provides a very comfortable way for the user to shrink the number of search results."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:827
#, no-c-format
msgid "To start a search select one or more file types (<guilabel>Documents</guilabel>, <guilabel>Audio</guilabel>, <guilabel>Video</guilabel>, <guilabel>Images</guilabel>), a time period and rating"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:831
#, no-c-format
msgid "Alternatively you can use these options in the <guilabel>Places</guilabel> panel together with the <guilabel>Filter</guilabel> bar to find files using Baloo or limit the search to files matching the filter expression."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:835
#, no-c-format
msgid "Use the Save icon to save a search to the <guilabel>Search For</guilabel> section in the <guilabel>Places</guilabel> panel to quickly access it again in the future."
msgstr ""
#. Tag: title
#. +> trunk5 stable5
#: index.docbook:846
#, no-c-format
msgid "Mounting Storage Media"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:848
#, no-c-format
msgid "A quick way to mount Storage Media is to click on the device in the <guilabel>Places</guilabel> panel. This will mount and open the device in &dolphin;."
msgstr ""
#. Tag: title
#. +> trunk5 stable5
#: index.docbook:856
#, no-c-format
msgid "Undo Actions"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:858
#, no-c-format
msgid "&dolphin; is capable of undoing changes you have made to files. For example if you moved a file to the Trash, &dolphin; can undo this and move it back to its original location. To undo an action, press <keycombo action=\"simul\">&Ctrl;<keycap>Z</keycap></keycombo> or select <menuchoice> <guimenu>Edit</guimenu> <guimenuitem>Undo: (action name)</guimenuitem> </menuchoice> in the menu, ⪚ <guimenuitem>Undo: Rename</guimenuitem>."
msgstr ""
#. Tag: title
#. +> trunk5 stable5
#: index.docbook:869
#, no-c-format
msgid "Renaming A Batch Of Files"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:870
#, no-c-format
msgid "&dolphin; is capable of renaming a number of files at the same time. Each file will have the file name specified, including a number, ⪚, Image1.jpg, Image2.jpg, Image3.jpg. This can be useful, ⪚, for pictures taken with a digital camera."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:876
#, no-c-format
msgid "If you wish to rename a batch of files, first select the files to be renamed. This can be done by pressing the &LMB; and drawing a rectangle around the files to be renamed before releasing it, or by holding &Ctrl; and clicking each file to be renamed (see <link linkend=\"selection\">Selecting Items in the View</link> for more details on item selection). Then open the batch-rename dialog by pressing <keycap>F2</keycap> or via the File menu: <menuchoice> <guimenu>File</guimenu> <guimenuitem>Rename...</guimenuitem> </menuchoice>"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:886
#, no-c-format
msgid "Then enter the name you wish to give the files. The # character must be present within the name. The files will then be renamed, where the <userinput>#</userinput> character is replaced by a different consecutive number for each file."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:892
#, no-c-format
msgid "If all file extensions in your selection are different, the name of all files can be changed without using a <userinput>#</userinput> placeholder while preserving the file extensions. This is ⪚ useful to rename a video file and all associated subtitle files, which have the same filename, but different extensions."
msgstr ""
#. Tag: title
#. +> trunk5 stable5
#: index.docbook:900
#, no-c-format
msgid "Comparing A Selection Of Files or Folders"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:902
#, no-c-format
msgid "If the &kompare; application is installed, you can use it to see the differences between two files or folders."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:907
#, no-c-format
msgid "First select the two files or folders to be compared. Then launch the &kompare; application via the Tools menu: <menuchoice> <guimenu>Tools</guimenu> <guimenuitem>Compare Files</guimenuitem> </menuchoice>. &kompare; will then open showing the differences between the files or folders."
msgstr ""
#. Tag: title
#. +> trunk5 stable5
#: index.docbook:916
#, no-c-format
msgid "Filtering Files"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:918
#, no-c-format
msgid "&dolphin; is capable of filtering files, &ie; showing only those items in the view whose name contains a given text. For example, if you wish to show only the <acronym>MP3</acronym> files within a folder, you could filter for <quote>.mp3</quote>. This would then filter out all files whose name does not contain <quote>.mp3</quote>."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:925
#, no-c-format
msgid "To filter files, first enable the filter bar, either by pressing <keycombo action=\"simul\">&Ctrl;<keycap>I</keycap></keycombo> or via the menu: <menuchoice> <guimenu>Tools</guimenu> <guimenuitem>Show Filter Bar</guimenuitem> </menuchoice>. You can then enter the text to be filtered for in the filter bar. The filter bar can be disabled either by pressing &Esc;, or with a &LMB; click on the <guiicon>Hide Filter Bar</guiicon> icon."
msgstr ""
#. Tag: title
#. +> trunk5 stable5
#: index.docbook:940
#, no-c-format
msgid "Configuring &dolphin;"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:942
#, no-c-format
msgid "&dolphin; distinguishes two different kinds of settings:"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:947
#, no-c-format
msgid "Settings which affect the general behavior of &dolphin;. These can be configured using the <link linkend=\"preferences-dialog\">Preferences Dialog</link>."
msgstr ""
#. Tag: para
#. +> trunk5
#: index.docbook:952
#, no-c-format
msgid "Settings which determine how the contents of a folder are displayed in &dolphin;. These settings are called <link linkend=\"view-properties\">View Display Styles</link> and can be controlled with toolbar buttons, via the <guimenu>View</guimenu> menu, and with the <link linkend=\"view-properties-dialog\">View Display Style dialog</link>. In the default configuration, all folders use the same display style, but &dolphin; can also be configured to remember each folder's display style separately in the <link linkend=\"preferences-dialog-general-behavior\"><quote>General</quote> section of the settings</link>."
msgstr ""
#. Tag: para
#. +> stable5
#: index.docbook:952
#, no-c-format
msgid "Settings which determine how the contents of a folder are displayed in &dolphin;. These settings are called <link linkend=\"view-properties\">View Properties</link> and can be controlled with toolbar buttons, via the <guimenu>View</guimenu> menu, and with the <link linkend=\"view-properties-dialog\">View Properties Dialog</link>. In the default configuration, the view properties are remembered for each folder, but &dolphin; can also be configured to use common view properties for all folders in the <link linkend=\"preferences-dialog-general-behavior\"><quote>General</quote> section of the settings</link>."
msgstr ""
#. Tag: title
#. +> trunk5 stable5
#: index.docbook:968
#, no-c-format
msgid "The &dolphin; Preferences Dialog"
msgstr ""
#. Tag: title
#. +> stable5
#: index.docbook:1463
#, no-c-format
msgid "The View Properties Dialog"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:969
#, no-c-format
msgid "The Preferences Dialog is opened via <menuchoice><guimenu>Settings</guimenu> <guimenuitem>Configure &dolphin;...</guimenuitem></menuchoice> in the menu in &dolphin;'s main window. The settings are divided into several groups which can be accessed by clicking the corresponding icon on the left of the dialog."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:976
#, no-c-format
msgid "All settings except for the <guilabel>Startup</guilabel> page and the <guilabel>Status Bar</guilabel> tab on the <guilabel>General</guilabel> page are shared with &konqueror; in filemanager mode."
msgstr ""
#. Tag: title
#. +> trunk5 stable5
#: index.docbook:981
#, no-c-format
msgid "General"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:983
#, no-c-format
msgid "This group contains settings which control the general behavior of &dolphin;. The group is divided further into four subgroups which can be accessed using the tab bar at the top."
msgstr ""
#. Tag: screeninfo
#. +> trunk5 stable5
#: index.docbook:989
#, no-c-format
msgid "Screenshot of the General settings in &dolphin;'s preferences dialog"
msgstr ""
#. Tag: phrase
#. +> trunk5 stable5
#: index.docbook:995
#, no-c-format
msgid "General Settings."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:997
#, no-c-format
msgid "General Settings in &dolphin;'s Preferences Dialog."
msgstr ""
#. Tag: title
#. +> trunk5 stable5
#: index.docbook:1004
#, no-c-format
msgid "Behavior Tab"
msgstr ""
#. Tag: para
#. +> trunk5
#: index.docbook:1010
#, no-c-format
msgid "In the <guilabel>View</guilabel> section, you can configure whether the same <link linkend=\"view-properties\">view display style</link> is shared among all folders or folders remember their own individual view display styles."
msgstr ""
#. Tag: para
#. +> stable5
#: index.docbook:1010
#, no-c-format
msgid "In the <guilabel>View</guilabel> section, you can configure whether the <link linkend=\"view-properties\"> view properties</link> are stored for each folder or if common view properties are to be used for all folders."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:1016
#, no-c-format
msgid ""
"<guilabel>Sorting Mode</guilabel> controls how items are sorted in the view. If <guilabel>Natural sorting</guilabel> is enabled, the sort order of three example files will be "
"<orderedlist> "
"<listitem>"
"<para>File1,</para>"
"</listitem>"
" "
"<listitem>"
"<para>File2,</para>"
"</listitem>"
" "
"<listitem>"
"<para>File10.</para>"
"</listitem>"
" </orderedlist>"
" If this option is disabled, the normal alphabetical sorting case sensitive or case insensitive will be used, which leads to the sort order"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:1028
#, no-c-format
msgid "File1,"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:1029
#, no-c-format
msgid "File10,"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:1030
#, no-c-format
msgid "File2."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:1034
#, no-c-format
msgid "When hovering over a file or folder with the mouse, a small window with relevant information is shown if <guilabel>Show tooltips</guilabel> is enabled."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:1039
#, no-c-format
msgid "<guilabel>Show selection marker</guilabel> shows a small <guibutton>+</guibutton> or <guibutton>-</guibutton> button above an item's icon if the item is hovered over with the mouse. These can be used to select or deselect the item."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:1045
#, no-c-format
msgid "Enable <guilabel>Rename inline</guilabel> to use this mode if only one item is currently selected. If this option is disabled or several items are selected, a dialog will be displayed for renaming."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:1050
#, no-c-format
msgid "Enabling <guilabel>Switch between split panes with tab key</guilabel> allows to switch split views with the 	 key."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:1054
#, no-c-format
msgid "Disable <guilabel>Turning off split view closes active pane</guilabel> to close the inactive pane when you are turning off the split view mode, ⪚ pressing <keycap>F3</keycap>."
msgstr ""
#. Tag: title
#. +> trunk5 stable5
#: index.docbook:1065
#, no-c-format
msgid "Previews Tab"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:1067
#, no-c-format
msgid "In this tab, you can configure for which file types previews are shown. Moreover, the maximum size of remote files for which previews are generated can be chosen."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:1071
#, no-c-format
msgid "If previews are enabled for folders, previews of some files in the folder will be shown inside a folder's icon."
msgstr ""
#. Tag: title
#. +> trunk5 stable5
#: index.docbook:1078
#, no-c-format
msgid "Confirmations Tab"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:1079
#, no-c-format
msgid "In the ask for confirmation section, you can enable warning dialogs that are shown before potentially harmful actions."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:1083
#, no-c-format
msgid "It is also possible to choose the default action <guilabel>When opening an executable file</guilabel>. There are three options, namely <guimenuitem>Always ask</guimenuitem>, <guimenuitem>Open in application</guimenuitem>, and <guimenuitem>Run script</guimenuitem>."
msgstr ""
#. Tag: para
-#. +> trunk5 stable5
+#. +> trunk5
+#: index.docbook:1086
+#, no-c-format
+msgid "The confirmation settings for <guilabel>Moving files or folders to trash</guilabel> and <guilabel>Deleting files or folders</guilabel> affect file operations in &dolphin;, &konqueror;, &gwenview; and all &kde; applications using the default &kde; file dialog, whereas <guilabel>Closing Dolphin windows with multiple tabs</guilabel> is a &dolphin; specific setting."
+msgstr ""
+
+#. Tag: para
+#. +> stable5
#: index.docbook:1086
#, no-c-format
msgid "The confirmation settings for <guilabel>Moving files or folders to trash</guilabel> and <guilabel>Deleting files or folders</guilabel> affect file operations in &dolphin;, &konqueror;, <application>Gwenview</application> and all &kde; applications using the default &kde; file dialog, whereas <guilabel>Closing Dolphin windows with multiple tabs</guilabel> is a &dolphin; specific setting."
msgstr ""
#. Tag: title
#. +> trunk5 stable5
#: index.docbook:1094
#, no-c-format
msgid "Status Bar Tab"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:1096
#, no-c-format
msgid "In this tab, some additional items can be enabled for the status bar, provided the status bar is wide enough:"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:1102
#, no-c-format
msgid "A <guilabel>zoom slider</guilabel> which can be used to change the icon size quickly."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:1106
#, no-c-format
msgid "A bar that shows how much space is free on the current drive."
msgstr ""
#. Tag: title
#. +> trunk5 stable5
#: index.docbook:1119
#, no-c-format
msgid "Startup"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:1121
#, no-c-format
msgid "This group contains settings which control the appearance of &dolphin; on startup."
msgstr ""
#. Tag: screeninfo
#. +> trunk5 stable5
#: index.docbook:1125
#, no-c-format
msgid "Screenshot of the Startup settings in &dolphin;'s preferences dialog"
msgstr ""
#. Tag: phrase
#. +> trunk5 stable5
#: index.docbook:1131
#, no-c-format
msgid "Startup Settings."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:1133
#, no-c-format
msgid "Startup Settings in &dolphin;'s Preferences Dialog."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:1139
#, no-c-format
msgid "The <guilabel>Start in</guilabel> folder is the folder which is opened on startup. The location of the folder can be entered directly or chosen in a dialog which can be opened by clicking the button showing a <quote>folder</quote> icon. Moreover, the current location or the default location (which is the user's home folder) can be used as the startup folder by clicking the corresponding button."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:1147
#, no-c-format
msgid "<guilabel>Split view mode</guilabel> controls if the <link linkend=\"dolphin-view\">&dolphin; view</link> is split on startup or not."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:1153
#, no-c-format
msgid "<guilabel>Editable location bar</guilabel> controls if the location bar is in editable mode on startup. The bread crumb mode of the location bar is used otherwise. See the <link linkend=\"location-bar\">section about the location bar</link> for details about the two modes."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:1160
#, no-c-format
msgid "If <guilabel>Show full path inside location bar</guilabel> is enabled, the full path of the current location is shown in the bread crumb mode of the location bar. Otherwise, a shortened version of the path is shown if it begins with the path of one of the places in the <guilabel>Places</guilabel> panel."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:1167
#, no-c-format
msgid "<guilabel>Show filter bar</guilabel> controls if the filter bar is shown on startup or not. See the <link linkend=\"filter-files\">section on the filter bar</link> for details."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:1173
#, no-c-format
msgid "<guilabel>Show full path in title bar</guilabel> makes it easy to distinguish between files or folders with the same name in different folders."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:1178
#, no-c-format
msgid "<guilabel>Open new folders in tabs</guilabel> controls whether &dolphin; should open a new folder in a new tab of the current instance when called externally. If not enabled, the new folders will be opened in new instances of &dolphin;. By default this option is enabled."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:1190
#, no-c-format
msgid "This group contains settings which control the behavior of &dolphin;'s view modes. The three view modes (Icons, Compact, and Details) are accessible via the tab bar at the top."
msgstr ""
#. Tag: screeninfo
#. +> trunk5 stable5
#: index.docbook:1196
#, no-c-format
msgid "Screenshot of the Icons View settings in &dolphin;'s preferences dialog"
msgstr ""
#. Tag: phrase
#. +> trunk5 stable5
#: index.docbook:1202
#, no-c-format
msgid "View Modes Settings."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:1204
#, no-c-format
msgid "View Modes Settings in &dolphin;'s Preferences Dialog."
msgstr ""
#. Tag: title
#. +> trunk5 stable5
#: index.docbook:1211
#, no-c-format
msgid "Common settings for all view modes"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:1213
#, no-c-format
msgid "All three view modes have some common settings:"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:1218
#, no-c-format
msgid "Sliders which control the size of the icons. The <guilabel>Default</guilabel> or <guilabel>Preview</guilabel> sizes are used if previews are disabled or enabled, respectively. Note that the icon size can be changed easily with the zoom slider in the status bar if the corresponding option is enabled in the <link linkend=\"preferences-dialog-general-statusbar\"><quote>General</quote> section of the settings</link>."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:1227
#, no-c-format
msgid "A setting for the font used in the view mode: either the system font or a custom font can be chosen."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:1233
#, no-c-format
msgid "The other settings in the <guilabel>Text</guilabel> section which apply to only one of the view modes are discussed below."
msgstr ""
#. Tag: title
#. +> trunk5 stable5
#: index.docbook:1241
#, no-c-format
msgid "Icons"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:1244
#, no-c-format
msgid "<guilabel>Width</guilabel> controls the minimum width that is reserved for the text of a file item."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:1248
#, no-c-format
msgid "<guilabel>Maximum lines</guilabel> means maximum number of text lines below the icon."
msgstr ""
#. Tag: title
#. +> trunk5 stable5
#: index.docbook:1256
#, no-c-format
msgid "Compact"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:1259
#, no-c-format
msgid "<guilabel>Maximum width</guilabel> controls the maximum width that is reserved for the text of a file item."
msgstr ""
#. Tag: title
#. +> trunk5 stable5
#: index.docbook:1268
#, no-c-format
msgid "Details"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:1271
#, no-c-format
msgid "<guilabel>Expandable folders</guilabel> determines whether any folders that have subfolders are displayed in a tree view, where the sub items can be expanded by &LMB; clicking the <guiicon>></guiicon> icon and collapsed by clicking the <guiicon>v</guiicon> icon."
msgstr ""
#. Tag: title
#. +> trunk5 stable5
#: index.docbook:1283
#, no-c-format
msgid "Navigation"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:1285
#, no-c-format
msgid "This group contains settings which control how navigation in the folder structure and in archives works."
msgstr ""
#. Tag: screeninfo
#. +> trunk5 stable5
#: index.docbook:1290
#, no-c-format
msgid "Screenshot of the Navigation settings in &dolphin;'s preferences dialog"
msgstr ""
#. Tag: phrase
#. +> trunk5 stable5
#: index.docbook:1296
#, no-c-format
msgid "Navigation Settings."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:1298
#, no-c-format
msgid "Navigation Settings in &dolphin;'s Preferences Dialog."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:1304
#, no-c-format
msgid "The option to open items with a single or double mouse click is a system wide setting and can be changed in the &systemsettings; in the <menuchoice><guimenu>Input Devices</guimenu> <guimenuitem>Mouse</guimenuitem></menuchoice> module."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:1310
#, no-c-format
msgid "Archives will be opened inside &dolphin;, and not in an external application, if <guilabel>Open Archives as folder</guilabel> is enabled."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:1315
#, no-c-format
msgid "If <guilabel>Open folders during drag operations</guilabel> is enabled, dragging an item with the mouse and hovering over a folder with it for a short time will open that folder. This allows you to move or copy items quickly to folders which are several levels deeper in the folder hierarchy."
msgstr ""
#. Tag: title
#. +> trunk5 stable5
#: index.docbook:1329
#, no-c-format
msgid "Services"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:1331
#, no-c-format
msgid "This group offers a selection of services that can be shown in the <guisubmenu>Actions</guisubmenu> submenu of &dolphin;'s context menu which appears when clicking a file or folder with the &RMB;."
msgstr ""
#. Tag: screeninfo
#. +> trunk5 stable5
#: index.docbook:1338
#, no-c-format
msgid "Screenshot of the Services settings in &dolphin;'s preferences dialog"
msgstr ""
#. Tag: phrase
#. +> trunk5 stable5
#: index.docbook:1344
#, no-c-format
msgid "Services Settings."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:1346
#, no-c-format
msgid "Services Settings in &dolphin;'s Preferences Dialog."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:1350
#, no-c-format
msgid "Using the <guibutton>Download New Services</guibutton> you can fetch additional services for the context menu."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:1354
#, no-c-format
msgid "If you have installed &dolphin;'s plugins for <guilabel>Bazaar</guilabel>, <guilabel>Mercurial</guilabel>, <guilabel>Git</guilabel> or <guilabel>Subversion</guilabel> from the kdesdk module these services are shown in the list. If these plugins are enabled and you enter a folder which is under version control, the version state (locally changed, up to date &etc;) is indicated by icons and you have additional entries in the context menu like commit, update, add, remove &etc;"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:1363
#, no-c-format
msgid "In the service list you can also choose if the <guimenuitem>Delete</guimenuitem>, <guimenuitem>Copy To</guimenuitem>, and <guimenuitem>Move To</guimenuitem> commands are shown in the context menu."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:1368
#, no-c-format
msgid "&dolphin; has to be restarted to activate the changes for some of these settings."
msgstr ""
#. Tag: title
#. +> trunk5 stable5
#: index.docbook:1376
#, no-c-format
msgid "Trash"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:1378
#, no-c-format
msgid "This group contains settings which control the behavior of the trash."
msgstr ""
#. Tag: screeninfo
#. +> trunk5 stable5
#: index.docbook:1382
#, no-c-format
msgid "Screenshot of the Trash settings in &dolphin;'s preferences dialog"
msgstr ""
#. Tag: phrase
#. +> trunk5 stable5
#: index.docbook:1388
#, no-c-format
msgid "Trash Settings."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:1390
#, no-c-format
msgid "Trash Settings in &dolphin;'s Preferences Dialog."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:1396
#, no-c-format
msgid "Files which are older than a configurable number of days can be deleted automatically."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:1400
#, no-c-format
msgid "The size of the trash can be limited to a configurable percentage of the disk size. If this limit is reached, a warning can be issued, or the oldest or largest files can be deleted automatically."
msgstr ""
#. Tag: title
#. +> trunk5
#: index.docbook:1415
#, no-c-format
msgid "Folder View Display Style"
msgstr ""
#. Tag: title
#. +> stable5
#: index.docbook:1415
#, no-c-format
msgid "Folder View Properties"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:1417
#, no-c-format
msgid "The following settings control how the contents of a folder are displayed in the &dolphin; view, and are stored on a per-folder basis by default:"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:1423
#, no-c-format
msgid "The view mode (Icons, Compact, Details)"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:1427
#, no-c-format
msgid "The sorting of items, which is determined by the sort order (ascending, descending) and the attribute (such as name, size,...) that the items are sorted by"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:1433
#, no-c-format
msgid "Sorting of folders and files – are folders shown first or not?"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:1437
#, no-c-format
msgid "Previews – are they shown instead of icons (based on the settings made in <link linkend=\"preferences-dialog-general-previews\"><guilabel>Previews</guilabel> tab of &dolphin;'s General settings</link>) or not?"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:1443
#, no-c-format
msgid "Are items shown in groups in the views?"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:1447
#, no-c-format
msgid "Are hidden files shown?"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:1451
#, no-c-format
msgid "What additional information (besides the name) is shown in the Icons or Details view?"
msgstr ""
#. Tag: para
#. +> trunk5
#: index.docbook:1456
#, no-c-format
msgid "The view display style can be configured in the <menuchoice><guimenu>View</guimenu></menuchoice> menu, some (such as the view mode) can also be changed using toolbar buttons."
msgstr ""
#. Tag: para
#. +> stable5
#: index.docbook:1456
#, no-c-format
msgid "The view properties can be configured in the <menuchoice><guimenu>View</guimenu></menuchoice> menu, some (such as the view mode) can also be changed using toolbar buttons."
msgstr ""
#. Tag: title
#. +> trunk5
#: index.docbook:1463
#, no-c-format
msgid "The View Display Style dialog"
msgstr ""
#. Tag: screeninfo
#. +> trunk5
#: index.docbook:1468
#, no-c-format
msgid "Screenshot of the View Display Style dialog"
msgstr ""
#. Tag: screeninfo
#. +> stable5
#: index.docbook:1468
#, no-c-format
msgid "Screenshot of the View Properties dialog"
msgstr ""
#. Tag: phrase
#. +> trunk5
#: index.docbook:1474
#, no-c-format
msgid "The View Display Style dialog."
msgstr ""
#. Tag: phrase
#. +> stable5
#: index.docbook:1474
#, no-c-format
msgid "The View Properties dialog."
msgstr ""
#. Tag: para
#. +> trunk5
#: index.docbook:1476
#, no-c-format
msgid "The View Display Style Dialog."
msgstr ""
#. Tag: para
#. +> stable5
#: index.docbook:1476
#, no-c-format
msgid "The View Properties Dialog."
msgstr ""
#. Tag: para
#. +> trunk5
#: index.docbook:1478
#, no-c-format
msgid "The <guilabel>View Display Style</guilabel> dialog can be used to quickly modify the view display styles for many folders at once. This is done for the current folder, for the current folder including all subfolders, or even for all folders, depending on the choice made in the <guilabel>Apply to</guilabel> section."
msgstr ""
#. Tag: para
#. +> stable5
#: index.docbook:1478
#, no-c-format
msgid "The <guilabel>View Properties</guilabel> dialog can be used to quickly modify several view properties at once. This is done for the current folder, for the current folder including all subfolders, or even for all folders, depending on the choice made in the <guilabel>Apply to</guilabel> section."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:1486
#, no-c-format
msgid "If <guilabel>Use as default view settings</guilabel> is enabled, the chosen view properties will also be used for all folders which do not have customized view properties yet."
msgstr ""
#. Tag: title
#. +> trunk5 stable5
#: index.docbook:1499
#, no-c-format
msgid "Command Reference"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:1500
#, no-c-format
msgid "By default the menubar is not shown. All actions described here either can be accessed with toolbar buttons or with items in the menu of the <guibutton>Control</guibutton> toolbar button."
msgid "Creates a new object (such as a folder or a text file) in the current folder."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:1519
#, no-c-format
msgid "You will find an explanation of all available objects in &konqueror;'s handbook in the chapter <ulink url=\"help:/konqueror/making.html\">Create New</ulink>."
msgid "<menuchoice> <shortcut> <keycombo action=\"simul\">&Ctrl;<keycap>V</keycap></keycombo> </shortcut> <guimenu>Edit</guimenu> <guimenuitem>Paste Clipboard Contents...</guimenuitem></menuchoice> or <menuchoice><guimenu>Edit</guimenu><guimenuitem>Paste one File</guimenuitem></menuchoice> or <menuchoice><guimenu>Edit</guimenu><guimenuitem>Paste one Folder</guimenuitem></menuchoice> or <menuchoice><guimenu>Edit</guimenu><guimenuitem>Paste x Items</guimenuitem> </menuchoice>"
msgstr ""
#. Tag: action
#. +> trunk5 stable5
#: index.docbook:1690
#, no-c-format
msgid "Pastes the currently copied/cut items to the current folder. If the clipboard does not contain files or folders, the clipboard contents (such as text or image data) will be pasted into a new file. The name of this file has to be entered in a dialog."
msgid "Opens the find bar. Enter a search term into the edit box and select to search for filename or in contents of files starting from the current folder or everywhere."
msgid "<action>Changes whether items are sorted</action> by <guimenuitem>Name</guimenuitem> or other criteria described in <link linkend=\"dolphin-view-information\">Information in the View</link>."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:1793
#, no-c-format
msgid "<guimenuitem>Descending</guimenuitem> reverses the sort order. <guimenuitem>Folders First</guimenuitem> sorts folders before files."
msgid "<action>Shows all the hidden files and sub-folders within the current folder.</action>There is an alternate shortcut <keycombo action=\"simul\">&Ctrl;<keycap>H</keycap></keycombo> for this action."
msgid "<action>Enables and disables</action> the different <link linkend=\"panels\">panels</link>: <guimenuitem>Places</guimenuitem> (<keycap>F9</keycap>), <guimenuitem>Information</guimenuitem> (<keycap>F11</keycap>), <guimenuitem>Folders</guimenuitem> (<keycap>F7</keycap>), <guimenuitem>Terminal</guimenuitem> (<keycap>F4</keycap>). With <guimenuitem>Lock Panels</guimenuitem> the panel header with caption and two buttons is hidden to save space and the panels are immutable, with <guimenuitem>Unlock Panels</guimenuitem> the header is visible and the panel can be moved to the right or left or even outside the main window."
msgid "Changes the location bar between the two modes; the <link linkend=\"location-bar-bread-crumb\">bread crumb mode</link> and the <link linkend=\"location-bar-editable\">editable mode</link>."
msgid "Switches the location bar to <link linkend=\"location-bar-editable\">editable mode</link>, if necessary, and selects the location such that it can be replaced quickly."
msgid "<action>Enables and disables the <link linkend=\"filter-files\">filter bar</link>.</action> You can also use the alternate shortcut <keycombo action=\"simul\">&Shift;<keycap>/</keycap></keycombo> for this action."
msgid "Allows you to choose the charset used by a remote connection manually."
msgstr ""
#. Tag: title
#. +> trunk5 stable5
#: index.docbook:2054
#, no-c-format
msgid "The Settings and Help Menu"
msgstr ""
#. Tag: para
#. +> trunk5
#: index.docbook:2055
#, no-c-format
msgid "&dolphin; has the common &kde; <guimenu>Settings</guimenu> and <guimenu>Help</guimenu> menu items, for more information read the sections about the <ulink url=\"help:/fundamentals/menus.html#menus-settings\">Settings Menu</ulink> and <ulink url=\"help:/fundamentals/menus.html#menus-help\">Help Menu</ulink> of the &kde; Fundamentals."
msgstr ""
#. Tag: para
#. +> stable5
#: index.docbook:2044
#, no-c-format
msgid "&dolphin; has the common &kde; <guimenu>Settings</guimenu> and <guimenu>Help</guimenu> menu items, for more information read the sections about the <ulink url=\"help:/fundamentals/ui.html#menus-settings\">Settings Menu</ulink> and <ulink url=\"help:/fundamentals/ui.html#menus-help\">Help Menu</ulink> of the &kde; Fundamentals."
msgstr ""
#. Tag: title
#. +> trunk5 stable5
#: index.docbook:2066
#, no-c-format
msgid "Miscellaneous Questions"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:2071
#, no-c-format
msgid "Has &dolphin; replaced &konqueror;?"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:2074
#, no-c-format
msgid "&dolphin; is not intended to be a competitor to &konqueror;: &konqueror; acts as a universal viewer being able to show &HTML; pages, text documents, folders and a lot more, whereas &dolphin; focuses on being only a file manager. This approach allows the optimization of the user interface for the task of file management."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:2085
#, no-c-format
msgid "How can I get involved with the development of &dolphin;?"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:2088
#, no-c-format
msgid "The easiest way to get involved with &dolphin; is to subscribe to the developer mailing list <ulink url=\"https://mail.kde.org/mailman/listinfo/kfm-devel\">kfm-devel</ulink> and drop an email to the developer mailing list. Email what you can do, how much time you can devote &etc;, the developers will let you know what you can do in the project. If you wish to contribute to the documentation please email the <ulink url=\"mailto:kde-doc-english@kde.org\">&kde; Documentation Team</ulink> list."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:2101
#, no-c-format
msgid "How can I submit bug reports?"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:2104
#, no-c-format
msgid "The official channel for submitting bug reports is via the &kde; bug tracking system. The &kde; bug tracker can be found at <ulink url=\"http://bugs.kde.org\">http://bugs.kde.org</ulink>."
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:2114
#, no-c-format
msgid "How can I submit feature requests?"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:2117
#, no-c-format
msgid "The official channel for submitting feature requests is via the &kde; bug tracking system. The &kde; bug tracker can be found at <ulink url=\"http://bugs.kde.org\">http://bugs.kde.org</ulink>."
msgstr ""
#. Tag: title
#. +> trunk5 stable5
#: index.docbook:2131
#, no-c-format
msgid "Credits and License"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:2133
#, no-c-format
msgid "&dolphin;"
msgstr ""
#. Tag: para
#. +> trunk5 stable5
#: index.docbook:2136
#, no-c-format
msgid "Program copyright 2006–2014 Peter Penz <email>peter.penz@gmx.at</email>, Frank Reininghaus <email>frank78ac@googlemail.com</email> and Emmanuel Pescosta <email>emmanuelpescosta099@gmail.com</email>"
"Language-Team: LANGUAGE <kde-i18n-doc@kde.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
#. Tag: title
#. +> trunk5 stable5
#: index.docbook:8
#, no-c-format
msgid "Online Help"
msgstr ""
#. Tag: date
#. +> trunk5 stable5
#: index.docbook:11
#, no-c-format
msgid "2018-04-01"
msgstr ""
#. Tag: releaseinfo
#. +> trunk5 stable5
#: index.docbook:12
#, no-c-format
msgid "Applications 18.04"
msgstr ""
#. Tag: para
-#. +> trunk5 stable5
+#. +> trunk5
+#: index.docbook:16
+#, no-c-format
+msgid "On this page, you can find different ways to find online help and additional information provided by the &kde; community."
+msgstr ""
+
+#. Tag: para
+#. +> stable5
#: index.docbook:16
#, no-c-format
msgid "On this page, you can find different ways to find online help and additional information provided by the KDE community."
msgstr ""
#. Tag: title
-#. +> trunk5 stable5
+#. +> trunk5
+#: index.docbook:20
+#, no-c-format
+msgid "&kde; UserBase"
+msgstr ""
+
+#. Tag: title
+#. +> stable5
#: index.docbook:20
#, no-c-format
msgid "KDE UserBase"
msgstr ""
#. Tag: term
-#. +> trunk5 stable5
+#. +> trunk5
+#: index.docbook:21
+#, no-c-format
+msgid "<ulink url=\"https://userbase.kde.org/Special:myLanguage/An_introduction_to_KDE\">An Introduction to &kde;</ulink> "
+msgstr ""
+
+#. Tag: term
+#. +> stable5
#: index.docbook:21
#, no-c-format
msgid "<ulink url=\"https://userbase.kde.org/Special:myLanguage/An_introduction_to_KDE\">An Introduction to KDE</ulink> "
msgstr ""
#. Tag: para
-#. +> trunk5 stable5
+#. +> trunk5
+#: index.docbook:25
+#, no-c-format
+msgid "Learn more about the <ulink url=\"https://kde.org/community/whatiskde/\"> &kde; community and its software</ulink> and find information to help you get started. Also, discover what <ulink url=\"https://userbase.kde.org/Special:myLanguage/Welcome_to_KDE_UserBase\"> UserBase</ulink> is and how it can help you."
+msgstr ""
+
+#. Tag: para
+#. +> stable5
#: index.docbook:25
#, no-c-format
msgid "Learn more about the <ulink url=\"https://userbase.kde.org/Special:myLanguage/What_is_KDE\"> KDE community and its software</ulink> and find information to help you get started. Also, discover what <ulink url=\"https://userbase.kde.org/Special:myLanguage/Welcome_to_KDE_UserBase\"> UserBase</ulink> is and how it can help you."
msgid "Need some help? Here are some suggested places where you can get help with problems, as well some hints on how to improve the quality of answers you receive."
+msgid "How-To's, Tips & Tricks that can help make your &kde; software experience more enjoyable and productive."
+msgstr ""
+
+#. Tag: para
+#. +> stable5
#: index.docbook:54
#, no-c-format
msgid "How-To's, Tips & Tricks that can help make your KDE software experience more enjoyable and productive."
msgstr ""
#. Tag: title
-#. +> trunk5 stable5
+#. +> trunk5
+#: index.docbook:63
+#, no-c-format
+msgid "&kde; Forum"
+msgstr ""
+
+#. Tag: title
+#. +> stable5
#: index.docbook:63
#, no-c-format
msgid "KDE Forum"
msgstr ""
#. Tag: term
-#. +> trunk5 stable5
+#. +> trunk5
+#: index.docbook:64
+#, no-c-format
+msgid "<ulink url=\"https://forum.kde.org/\">&kde; Community Forums</ulink> "
+msgstr ""
+
+#. Tag: term
+#. +> stable5
#: index.docbook:64
#, no-c-format
msgid "<ulink url=\"https://forum.kde.org/\">KDE Community Forums</ulink> "
msgstr ""
#. Tag: para
-#. +> trunk5 stable5
+#. +> trunk5
+#: index.docbook:67
+#, no-c-format
+msgid "The &kde; Forums offer users, developers and people interested in &kde; a place to help each other, discuss &kde;-related topics and exchange ideas. You can find <ulink url=\"https://forum.kde.org/viewforum.php?f=14/\">Tutorials & Tips</ulink> in the forum."
+msgstr ""
+
+#. Tag: para
+#. +> stable5
#: index.docbook:67
#, no-c-format
msgid "The KDE Forums offer users, developers and people interested in KDE a place to help each other, discuss KDE-related topics and exchange ideas. You can find <ulink url=\"https://forum.kde.org/viewforum.php?f=14/\">Tutorials & Tips</ulink> in the forum."
+msgid "This page holds the complete &kde; User Documentation in over 25 languages for the released and the development version of &kde-frameworks;, &plasma-workspaces; and &applications;."
+msgstr ""
+
+#. Tag: para
+#. +> stable5
#: index.docbook:90
#, no-c-format
msgid "This page holds the complete KDE User Documentation in over 25 languages for the released and the development version of &kde-frameworks;, &plasma-workspaces; and &applications;."
msgid "<em>Note:</em> To view these pages when you are in other parts of Plan, choose the menu option <em>Help -> Introduction to Plan</em>."
msgstr ""
#. +> trunk5 stable5
#: about/aboutpage.cpp:117
#, kde-format
msgid ""
"Plan is intended for managing moderately large projects with multiple resources. To enable you to model your project adequately, Plan offers different types of task dependencies and timing constraints. Usually you will define your tasks, estimate the effort needed to perform each task, allocate resources and then schedule the project according to the dependency network and resource availability."
"<p>You can find more information online at <a href=\"https://userbase.kde.org/Plan\">https://userbase.kde.org/Plan</a></p>"
msgstr ""
#. +> trunk5 stable5
#: about/aboutpage.cpp:123
#, kde-format
msgid "Next: Tips"
msgstr ""
#. +> trunk5 stable5
#: about/aboutpage.cpp:173
#, kde-format
msgid "Editing tips."
msgstr ""
#. +> trunk5 stable5
#: about/aboutpage.cpp:175
#, kde-format
msgid ""
"<br/>"
"<b>To</b> edit project data, different views and editors can be selected in the View Selector docker.<br/>"
"<b>The</b> views are generally used to inspect data after the project has been scheduled. No data will appear in the views if the project has not been scheduled. Scheduling is done in the Schedules editor.<br/>"
"<b>You</b> can edit attributes in the various editors by selecting the item you want to edit (doubleclick or press F2), or open a dialog using the context menu.</ul>"
msgstr ""
#. +> trunk5 stable5
#: about/aboutpage.cpp:183
#, kde-format
msgid "Next: Create a simple project"
msgstr ""
#. +> trunk5 stable5
#: about/aboutpage.cpp:232
#, kde-format
msgid "Create the simplest project ever."
msgstr ""
#. +> trunk5 stable5
#: about/aboutpage.cpp:234
#, kde-format
msgctxt "1=datetime"
msgid ""
"Select the task editor <em>Editors->Tasks</em>:"
"<ul>"
"<li>Create a task by selecting <em>Add Task</em> in the toolbar.</li>"
"<li>Set <em>Type</em> to <em>Duration</em>.</li>"
"<li>Set <em>Estimate</em> to <em>8 hours</em>.</li>"
"<li>Set <em>Constraint</em> to <em>As Soon As Possible</em>.</li>"
"</ul>"
"Select the schedules editor <em>Editors->Schedules</em>:"
"<ul>"
"<li>Create a schedule by selecting <em>Add Schedule</em> in the toolbar.</li>"
"<li>Calculate the schedule by selecting <em>Calculate</em> in the toolbar.</li>"
"</ul>"
"The task should now have been scheduled to start %1 with a duration of 8 hours. You can check this by selecting the Gantt chart <em>Views->Gantt</em>."
msgstr ""
#. +> trunk5 stable5
#: about/aboutpage.cpp:250
#, kde-format
msgid "Next: Resource allocation"
msgstr ""
#. +> trunk5 stable5
#: about/aboutpage.cpp:261
#, kde-format
msgid "Allocate a resource to the task."
msgstr ""
#. +> trunk5 stable5
#: about/aboutpage.cpp:263
#, kde-format
msgctxt "1=datetime"
msgid ""
"Select the task editor <em>Editors->Tasks</em>:"
"<ul>"
"<li>Enter a name (e.g. 'John') in the <em>Allocation</em> column. (Plan will automatically create a resource with name 'John' under resource group 'Resources'.</li>"
"<li>Set <em>Type</em> to <em>Effort</em>.</li>"
"</ul>"
"Now you need to schedule the project again with the new allocation:<br/>"
"Select the schedules editor <em>Editors->Schedules</em> and calculate the schedule by selecting <em>Calculate</em> in the toolbar."
"<p>The task should be scheduled to start %1 with a duration of 8 hours. You can check this by selecting the Gantt chart <em>Views->Gantt</em>."
"<p>"
msgstr ""
#. +> trunk5 stable5
#: about/aboutpage.cpp:274
#, kde-format
msgid "Next: Introduction"
msgstr ""
#. i18n: ectx: Menu (file)
#. +> trunk5 stable5
#: calligraplan.rc:4
#, kde-format
msgid "&File"
msgstr ""
#. i18n: ectx: Menu (edit)
#. +> trunk5 stable5
#: calligraplan.rc:9
#, kde-format
msgid "&Edit"
msgstr ""
#. i18n: ectx: Menu (view)
#. +> trunk5 stable5
#: calligraplan.rc:20 calligraplan_readonly.rc:4
#, kde-format
msgid "&View"
msgstr ""
#. i18n: ectx: Menu (project)
#. +> trunk5 stable5
#: calligraplan.rc:27
#, kde-format
msgid "&Project"
msgstr ""
#. i18n: ectx: Menu (tools)
#. +> trunk5 stable5
#: calligraplan.rc:35
#, kde-format
msgid "&Tools"
msgstr ""
#. i18n: ectx: Menu (settings)
#. +> trunk5 stable5
#: calligraplan.rc:40
#, kde-format
msgid "&Settings"
msgstr ""
#. i18n: ectx: Menu (help)
#. +> trunk5 stable5
#: calligraplan.rc:43
#, kde-format
msgid "&Help"
msgstr ""
#. i18n: ectx: ToolBar (edit)
#. +> trunk5 stable5
#: calligraplan.rc:47
#, kde-format
msgid "Edit"
msgstr ""
#. i18n: ectx: label, entry (HoursPrYear), group (EstimateConversion)
#. +> trunk5 stable5
#: calligraplansettings.kcfg:9
#, kde-format
msgid "Hours per year"
msgstr ""
#. i18n: ectx: label, entry (HoursPrMonth), group (EstimateConversion)
#. +> trunk5 stable5
#: calligraplansettings.kcfg:13
#, kde-format
msgid "Hours per month"
msgstr ""
#. i18n: ectx: label, entry (HoursPrWeek), group (EstimateConversion)
#. +> trunk5 stable5
#: calligraplansettings.kcfg:17
#, kde-format
msgid "Hours per week"
msgstr ""
#. i18n: ectx: label, entry (HoursPrDay), group (EstimateConversion)
#. +> trunk5 stable5
#: calligraplansettings.kcfg:21
#, kde-format
msgid "Hours per day"
msgstr ""
#. i18n: ectx: label, entry (GenerateWeek), group (CalendarGeneration)
#. +> trunk5 stable5
#: calligraplansettings.kcfg:27
#, kde-format
msgid "Generate working week"
msgstr ""
#. i18n: ectx: label, entry (GenerateWeekChoice), group (CalendarGeneration)
#. +> trunk5 stable5
#: calligraplansettings.kcfg:31
#, kde-format
msgid "Generate working week options"
msgstr ""
#. i18n: ectx: label, entry (GenerateWeekChoice), group (CalendarGeneration)
"This is not limited to persons available in a resource group but can be anyone. You can even directly access your address book with the Choose button."
"<p>Values used for generating default calendars for working weeks and holidays.</p>"
"<p>The <span style=\" font-style:italic;\">Week</span> calendar uses the values defined in <span style=\" font-style:italic;\">Working week</span>.</p>"
"<p>The <span style=\" font-style:italic;\">Week</span> calendar can be <span style=\" font-style:italic;\">Always</span> generated or only generated <span style=\" font-style:italic;\">If none exists</span>. The latter choice is the most common as you often have calendars defined as part of templates or shared resources.</p>"
"<p><span style=\" font-style:italic;\">Holidays</span> can be generated for your region (default) or any region you choose. The holidays can be added into the week calendar, as sub-calendar to the week calendar or as a separate calendar.</p>"
"<p>If a week calendar is not generated, the holidays are put into a separate calendar.</p>"
"These values are used if your estimate is not in hours.\n"
"Let us say Hours per day is 8. If you estimate that a task needs 3 days effort to complete, this is converted to 24 hours when the task is scheduled. The actual time it will take to complete is of course dependent on the availability of the person (or persons) that is assigned to the task."
"This document was created with a newer version of KPlatoWork (syntax version: %1)\n"
"Opening it in this version of PlanWork will lose some information."
msgstr ""
#. +> trunk5 stable5
#: kptaboutdata.h:37
#, kde-format
msgctxt "application name"
msgid "Plan"
msgstr ""
#. +> trunk5 stable5
#: kptaboutdata.h:39
#, kde-format
msgid "Project Planning and Management Tool"
msgstr ""
#. +> trunk5 stable5
#: kptaboutdata.h:41
#, kde-format
msgid "Copyright 1998-%1, The Plan Team"
msgstr ""
#. +> trunk5 stable5
#: kptaboutdata.h:45
#, kde-format
msgid "Dag Andersen"
msgstr ""
#. +> trunk5 stable5
#: kptaboutdata.h:46
#, kde-format
msgid "Thomas Zander"
msgstr ""
#. +> trunk5 stable5
#: kptaboutdata.h:47
#, kde-format
msgid "Bo Thorsen"
msgstr ""
#. +> trunk5 stable5
#: kptaboutdata.h:48
#, kde-format
msgid "Raphael Langerhorst"
msgstr ""
#. i18n translator strings
#. +> trunk5 stable5
#: kptaboutdata.h:51
#, kde-format
msgctxt "NAME OF TRANSLATORS"
msgid "Your names"
msgstr ""
#. +> trunk5 stable5
#: kptaboutdata.h:52
#, kde-format
msgctxt "EMAIL OF TRANSLATORS"
msgid "Your emails"
msgstr ""
#. +> trunk5 stable5
#: kptbuiltinschedulerplugin.cpp:35
#, kde-format
msgctxt "Network = task dependency network"
msgid "Network Scheduler"
msgstr ""
#. +> trunk5 stable5
#: kptbuiltinschedulerplugin.cpp:36
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "Built-in network (PERT) based scheduler"
msgstr ""
#. +> trunk5 stable5
#: kptbuiltinschedulerplugin.cpp:45
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Network (PERT) Scheduler</title>"
"<para>The network scheduler generally schedules tasks according to their dependencies. When a task is scheduled it is scheduled in full, booking the allocated resources if available. If overbooking is not allowed, subsequent tasks that requests the same resource will be scheduled later in time.</para>"
"<para>Tasks with time constraints will be scheduled first to minimize the problem with resource conflicts</para>"
"<para><note>This scheduler does not handle resource conflicts well.<nl/>"
"You can try a different scheduler if available. You may also change resource allocations or add dummy dependencies to avoid the conflicts.</note></para>"
"<para>Creates a new project with default values defined in <emphasis>Settings</emphasis>.<nl/>"
"Opens the <emphasis>project dialog</emphasis> so you can define project specific properties like <resource>Project Name</resource>, <resource>Target Start</resource> and <resource>- End</resource> times.<nl/>"
"<link url='%1'>More...</link></para>"
msgstr ""
#. +> trunk5 stable5
#: welcome/WelcomeView.cpp:139
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Shared resources</title>"
"<para>Create a shared resources file.<nl/>"
"This enables you to only create your resources once, you just refer to your resources file when you create a new project.<nl/>"
"These resources can then be shared between projects to avoid overbooking resources across projects.<nl/>"
"Shared resources must be defined in a separate file.<nl/>"
"<link url='%1'>More...</link></para>"
msgstr ""
#. +> trunk5 stable5
#: welcome/WelcomeView.cpp:152
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Recent Projects</title>"
"<para>A list of the 10 most recent project files opened.</para>"
"<para><nl/>"
"This enables you to quickly open projects you have worked on recently.</para>"
msgstr ""
#. +> trunk5 stable5
#: welcome/WelcomeView.cpp:161
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Introduction to <application>Plan</application></title>"
"<para>These introductory pages gives you hints and tips on what you can use <application>Plan</application> for, and how to use it.</para>"
msgstr ""
#. +> trunk5 stable5
#: welcome/WelcomeView.cpp:169
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Context help</title>"
"<para>Help is available many places using <emphasis>What's This</emphasis>.<nl/>"
"It is activated using the menu entry <interface>Help->What's this?</interface> or the keyboard shortcut <shortcut>Shift+F1</shortcut>.</para>"
"<para>In dialogs it is available via the <interface>?</interface> in the dialog title bar.</para>"
"<para>If you see <link url='%1'>More...</link> in the text, pressing it will display more information from online resources in your browser.</para>"
msgstr ""
#. +> trunk5 stable5
#: welcome/WelcomeView.cpp:187
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Project Templates</title>"
"<para>Select a template to create a new project based on the selected template.</para>"
"<para>Plan searches for templates in the places you can define in the settings dialog: <interface>Settings->Configure Plan</interface>.</para>"
"<para>You can create new templates from a project using the <interface>File->Create Project Template</interface> menu entry.<nl/>"
"<p>Many functions has help and hints that can be displayed with <span style=\" font-style:italic;\">What's this</span>.</p>"
"<p>Activate it by selecting <span style=\" font-style:italic;\">Help->What's this</span> or <span style=\" font-style:italic;\">Shift+F1</span>.</p>"
"If you want to modify the template, create a new project using this template and save it using <interface>File->Create Project Template...</interface>."
msgid "%1 resource requested for dynamic allocation"
msgid_plural "%1 resources requested for dynamic allocation"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: models/GroupAllocationItemModel.cpp:479
#, kde-format
msgctxt "@info:tooltip"
msgid "%1 resource allocated"
msgid_plural "%1 resources allocated"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: models/GroupAllocationItemModel.cpp:483
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid ""
"%1<nl/>"
"%2"
msgstr ""
#. +> trunk5 stable5
#: models/GroupAllocationItemModel.cpp:487
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Group allocations</title>"
"<para>You can allocate a number of resources from a group and let the scheduler select from the available resources at the time of scheduling.</para>"
" These dynamically allocated resources will be in addition to any resource you have allocated specifically."
msgstr ""
#. +> trunk5 stable5
#: models/GroupAllocationItemModel.cpp:526
#, kde-format
msgctxt "1: free resources, 2: number of resources"
msgid "%1 of %2"
msgstr ""
#. +> trunk5 stable5
#: models/GroupAllocationItemModel.cpp:529
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "There is %1 resource available in this group"
msgid_plural "There are %1 resources available in this group"
msgid "Defines when the resource is available to the project"
msgstr ""
#. +> trunk5 stable5
#: models/kptcommonstrings.cpp:123
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "The cost pr hour, normal hours"
msgstr ""
#. +> trunk5 stable5
#: models/kptcommonstrings.cpp:124
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "The cost pr hour, overtime hours"
msgstr ""
#. +> trunk5 stable5
#: models/kptcommonstrings.cpp:125
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "The fixed cost"
msgstr ""
#. +> trunk5 stable5
#: models/kptcommonstrings.cpp:126
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "The account where the resource cost is accumulated"
msgstr ""
#. +> trunk5 stable5
#: models/kptcommonstrings.cpp:128
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "The name of the account"
msgstr ""
#. +> trunk5 stable5
#: models/kptcommonstrings.cpp:129
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "The description of the account"
msgstr ""
#. +> trunk5 stable5
#: models/kptcommonstrings.cpp:131
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "The name and scheduling mode of the schedule"
msgstr ""
#. +> trunk5 stable5
#: models/kptcommonstrings.cpp:132
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "The schedules state"
msgstr ""
#. +> trunk5 stable5
#: models/kptcommonstrings.cpp:134
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "Controls resource overbooking when scheduling"
msgstr ""
#. +> trunk5 stable5
#: models/kptcommonstrings.cpp:136
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<para>Controls resource overbooking when scheduling.</para>"
"<para>If overbooking is allowed, a resource may be booked (on working days) to work more than it is available. This can happen if the resource is allocated to multiple tasks or are booked on other projects.</para>"
"<para>If overbooking is to be avoided, resources will not be booked more than they are available. On resource conflict, tasks will be delayed until the resource is available.</para>"
msgstr ""
#. +> trunk5 stable5
#: models/kptcommonstrings.cpp:142
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "The distribution to be used during scheduling"
msgstr ""
#. +> trunk5 stable5
#: models/kptcommonstrings.cpp:144
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<para>The distribution to be used during scheduling</para>"
"<para>If distribution is 'None', the tasks estimate is used as is during scheduling.</para>"
"<para>If distribution is 'PERT', the estimate used is calculated based on the entered optimistic- (O), pessimistic-(P) and most likely (M) estimate. The formula used for this is (O + 4 * M + P) / 6.</para>"
msgstr ""
#. +> trunk5 stable5
#: models/kptcommonstrings.cpp:150
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "Defines the schedules to be calculated"
msgstr ""
#. +> trunk5 stable5
#: models/kptcommonstrings.cpp:151
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "The scheduled start time"
msgstr ""
#. +> trunk5 stable5
#: models/kptcommonstrings.cpp:152
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "The scheduled finish time"
msgstr ""
#. +> trunk5 stable5
#: models/kptcommonstrings.cpp:153
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "The scheduling direction"
msgstr ""
#. +> trunk5 stable5
#: models/kptcommonstrings.cpp:155
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<para>The scheduling direction.</para>"
"<para>If direction is Forward, the project is scheduled starting at the projects earliest start time specified in the main project dialog.</para>"
"<para>If direction is Backward, the project is scheduled starting at the projects latest finish time specified in the main project dialog.</para>"
msgstr ""
#. +> trunk5 stable5
#: models/kptcommonstrings.cpp:161
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "The scheduler used for calculating the project schedule"
msgstr ""
#. +> trunk5 stable5
#: models/kptcommonstrings.cpp:163
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<para>The scheduler used for calculating the project schedule.</para>"
"<para>The default built-in scheduler is the Network Scheduler.</para>"
"<para>Other schedulers presently available is RCPS if libRCPS is installed on your system. RCPS is a genetics based resource constrained project scheduler.</para>"
msgstr ""
#. +> trunk5 stable5
#: models/kptcommonstrings.cpp:170
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "The granularity used when calculating the project schedule"
msgstr ""
#. +> trunk5 stable5
#: models/kptcommonstrings.cpp:172
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid ""
"<para>The scheduling mode:"
"<list>"
"<item><emphasis>Manual:</emphasis> Calculation must be initiated manually.</item>"
"<item><emphasis>Auto:</emphasis> Calculation is initiated automatically.</item>"
"<para>A working resource can be assigned to one or more required resources. A required resource is a material resource that the working resource depends on in order to do the work.</para>"
msgstr ""
#. +> stable5
#: models/kptresourceallocationmodel.cpp:254
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Required Resources</title>"
"<para>A working resource can be assigned to one or more required resources. A required resource is a material resource that the working resource depends on in order to do the work.</para>"
"<para>To be able to use a material resource as a required resource, the material resource must be part of a group of type <emphasis>Material</emphasis>.</para>"
msgstr ""
#. +> stable5
#: models/kptresourceallocationmodel.cpp:354
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Required Resources</title>"
"<para>A working resource can be assigned to one or more required resources. A required resource is a material resource that the working resource depends on in order to do the work.</para>"
"<para>To be able to use a material resource as a required resource, the material resource must be part of a group of type Material.</para>"
msgstr ""
#. +> trunk5
#: models/kptresourceallocationmodel.cpp:215
#: models/kptresourceallocationmodel.cpp:272
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Alternative Resource Allocation</title>"
"<para>A resource can have one or more alternative resource assigned to it. The scheduling software will then select the most appropriate resource to use.</para>"
msgstr ""
#. +> trunk5
#: models/kptresourceallocationmodel.cpp:250
#, kde-kuit-format
msgctxt "@title:column"
msgid "Alternative Resources"
msgstr ""
#. +> trunk5 stable5
#: models/kptresourceallocationmodel.cpp:251
#, kde-kuit-format
msgctxt "@title:column"
msgid "Required Resources"
msgstr ""
#. +> trunk5
#: models/kptresourceallocationmodel.cpp:264
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "Available resources or resource units"
msgstr ""
#. +> trunk5
#: models/kptresourceallocationmodel.cpp:265
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "List of resources that can be used as an alternative"
msgstr ""
#. +> trunk5
#: models/kptresourceallocationmodel.cpp:266
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "Required material resources"
msgstr ""
#. +> stable5
#: models/kptresourceallocationmodel.cpp:348
#, kde-kuit-format
msgctxt "@info:tootip"
msgid "Required material resources"
msgstr ""
#. +> trunk5 stable5
#: models/kptresourceallocationmodel.cpp:516
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "%1 allocated out of %2 available"
msgstr ""
#. +> trunk5 stable5
#: models/kptresourceallocationmodel.cpp:583
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "No material resources available"
msgstr ""
#. +> trunk5 stable5
#: models/kptresourceallocationmodel.cpp:591
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "No required resources"
msgstr ""
#. +> trunk5 stable5
#: models/kptresourceallocationmodel.cpp:594
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "Material resources cannot have required resources"
msgstr ""
#. +> trunk5 stable5
#: models/kptresourceallocationmodel.cpp:596
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "Team resources cannot have required resources"
msgstr ""
#. +> trunk5 stable5
#: models/kptresourceappointmentsmodel.cpp:471
#, kde-format
msgid "External project: %1"
msgstr ""
#. +> trunk5 stable5
#: models/kptresourceappointmentsmodel.cpp:547
#, kde-format
msgid "The total booking on %1, along with the maximum hours for the resource"
msgstr ""
#. +> trunk5 stable5
#: models/kptresourceappointmentsmodel.cpp:579
#, kde-format
msgid "Total booking by this task"
msgstr ""
#. +> trunk5 stable5
#: models/kptresourceappointmentsmodel.cpp:581
#, kde-format
msgid "Total booking by the external project"
msgstr ""
#. +> trunk5 stable5
#: models/kptresourceappointmentsmodel.cpp:624
#, kde-format
msgid "Booking by this task on %1"
msgstr ""
#. +> trunk5 stable5
#: models/kptresourceappointmentsmodel.cpp:626
#, kde-format
msgid "Booking by external project on %1"
msgstr ""
#. +> trunk5 stable5
#: models/kptresourceappointmentsmodel.cpp:757
#, kde-format
msgid "The total hours booked"
msgstr ""
#. +> trunk5 stable5
#: models/kptresourceappointmentsmodel.cpp:761
#, kde-format
msgid "Bookings on %1"
msgstr ""
#. +> trunk5 stable5
#: models/kptresourceappointmentsmodel.cpp:973
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid ""
"%1: %2<nl/>"
"%3: %4"
msgstr ""
#. +> trunk5 stable5
#: models/kptresourceappointmentsmodel.cpp:1026
#, kde-format
msgid "Interval"
msgstr ""
#. +> trunk5 stable5
#: models/kptresourceappointmentsmodel.cpp:1035
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid ""
"%1: %2<nl/>"
"%3: %4<nl/>"
"Assigned: %5<nl/>"
"Available: %6"
msgstr ""
#. +> trunk5 stable5
#: models/kptresourceappointmentsmodel.cpp:1247
#, kde-format
msgid "Start Time"
msgstr ""
#. +> trunk5 stable5
#: models/kptresourceappointmentsmodel.cpp:1248
#, kde-format
msgid "End Time"
msgstr ""
#. +> trunk5 stable5
#: models/kptresourceappointmentsmodel.cpp:1249
#, kde-kuit-format
msgctxt "@title:column noun"
msgid "Load"
msgstr ""
#. +> trunk5 stable5
#: models/kptschedulemodel.cpp:420
msgctxt "(qtundo-format)"
msgid "Modify schedule name"
msgstr ""
#. +> trunk5 stable5
#: models/kptschedulemodel.cpp:443
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "The schedule is in Manual Mode, calculation must be initiated manually"
msgstr ""
#. +> trunk5 stable5
#: models/kptschedulemodel.cpp:445
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "The schedule is in Auto Mode, it will be calculated automatically"
msgid "This document contains an unknown encryption method. Some parts may be unreadable."
msgstr ""
#. +> trunk5 stable5
#: store/KoEncryptedStore.cpp:300
#, kde-format
msgid "This document contains incomplete encryption data. Some parts may be unreadable."
msgstr ""
#. +> trunk5 stable5
#: store/KoEncryptedStore.cpp:314
#, kde-format
msgid "QCA has currently no support for SHA1 or PBKDF2 using SHA1. The document can not be opened."
msgstr ""
#. +> trunk5 stable5
#: store/KoEncryptedStore.cpp:344
#, kde-format
msgid "The manifest file seems to be corrupted. It cannot be modified and the document will remain unreadable. Please try and save the document again to prevent losing your work."
msgstr ""
#. +> trunk5 stable5
#: store/KoEncryptedStore.cpp:442
#, kde-format
msgid "The manifest file cannot be written. The document will remain unreadable. Please try and save the document again to prevent losing your work."
msgstr ""
#. +> trunk5 stable5
#: store/KoEncryptedStore.cpp:563
#, kde-format
msgid "Please enter the password to open this file."
msgstr ""
#. +> trunk5 stable5
#: store/KoEncryptedStore.cpp:738
#, kde-format
msgid "Please enter the password to encrypt the document with."
msgstr ""
#. +> trunk5 stable5
#: store/KoEncryptedStore.cpp:752
#, kde-format
msgid "Do you want to save the password?"
msgstr ""
#. +> trunk5 stable5
#: store/KoNetAccess.cpp:104
#, kde-format
msgid "File '%1' is not readable"
msgstr ""
#. +> trunk5 stable5
#: store/KoNetAccess.cpp:438
#, kde-format
msgid "ERROR: Unknown protocol '%1'"
msgstr ""
#. +> trunk5 stable5
#: store/KoStore.cpp:182
#, kde-format
msgid "The directory mode is not supported for remote locations."
"<para>The Cost Breakdown Structure (CBS) consists of accounts organized into a tree structure. Accounts can be tied to tasks or resources. Usually there will be two top accounts, one for aggregating costs from tasks and one for aggregating costs from resources.</para>"
"<para>This view supports printing using the context menu.<nl/>"
"<link url='%1'>More...</link></para>"
msgstr ""
#. +> trunk5 stable5
#: ui/kptaccountseditor.cpp:291
#, kde-kuit-format
msgctxt "@action:inmenu"
msgid "Add Account"
msgstr ""
#. +> trunk5 stable5
#: ui/kptaccountseditor.cpp:296
#, kde-kuit-format
msgctxt "@action:inmenu"
msgid "Add Subaccount"
msgstr ""
#. +> trunk5 stable5
#: ui/kptaccountseditor.cpp:301
#, kde-kuit-format
msgctxt "@action:inmenu"
msgid "Delete"
msgstr ""
#. +> trunk5 stable5
#: ui/kptaccountsview.cpp:72
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Cost Breakdown View</title>"
"<para>Displays aggregated total cost as well as cost distribution over time.</para>"
"<para>This view supports configuration and printing using the context menu.<nl/>"
"<para>A calendar defines availability for resources or tasks of type <emphasis>Duration</emphasis>. A calendar can be specific to a resource or task, or shared by multiple resources or tasks. A day can be of type <emphasis>Undefined</emphasis>, <emphasis>Non-working day</emphasis> or <emphasis>Working day</emphasis>. A working day has one or more work intervals defined. </para>"
"<para>A calendar can have sub calendars. If a day is undefined in a calendar, the parent calendar is checked. An <emphasis>Undefined</emphasis> day defaults to <emphasis>Non-working</emphasis> if used by a resource, or <emphasis>available all day</emphasis> if used by a task.</para>"
"<para>A calendar can be defined as the <emphasis>Default calendar</emphasis>. The default calendar is used by a working resource, when the resources calendar is not explicitly set.<nl/>"
"<para>Edit dependencies between tasks.Dependencies can be added by dragging a connection area (start or finish) from one task to a connection area of a different task. You can edit or delete a dependency using the context menu.</para>"
"<para>This view supports printing using the context menu.<nl/>"
"<para>Displays scheduled tasks in a Gantt diagram. The chart area can be zoomed in and out with a slider positioned in the upper left corner of the time scale. <note>You need to hoover over it with the mouse for it to show.</note></para>"
"<para>This view supports configuration and printing using the context menu of the tree view.<nl/>"
"<para>Displays scheduled milestones in a Gantt diagram. The chart area can be zoomed in and out with a slider positioned in the upper left corner of the time scale. <note>You need to hoover over it with the mouse for it to show.</note></para>"
"<para>This view supports configuration and printing using the context menu.<nl/>"
"<link url='%1'>More...</link></para>"
msgstr ""
#. +> trunk5 stable5
#: ui/kptganttview.cpp:1827
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Resource Assignments (Gantt)</title>"
"<para>Displays the scheduled resource - task assignments in a Gantt diagram. The chart area can be zoomed in and out with a slider positioned in the upper left corner of the time scale. <note>You need to hoover over it with the mouse for it to show.</note></para>"
"<para>This view supports configuration and printing using the context menu.<nl/>"
"The Work Breakdown Structure introduces numbering for all tasks in the project, according to the task structure.<nl/>"
"The WBS code is auto-generated.<nl/>"
"You can define the WBS code pattern using the <interface>Project->Define WBS Pattern</interface> menu entry."
msgstr ""
#. +> trunk5 stable5
#: ui/kptmainprojectpanel.cpp:115
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "Enables sharing resources with other projects"
msgstr ""
#. +> trunk5 stable5
#: ui/kptmainprojectpanel.cpp:117
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Shared resources</title>"
"Resources can be shared between projects to avoid overbooking resources across projects. Shared resources must be defined in a separate file, and you must have at least read access to it. The projects that share the resources must also be accessible by you."
msgstr ""
#. +> trunk5 stable5
#: ui/kptmainprojectpanel.cpp:125
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "File where shared resources are defined"
msgstr ""
#. +> trunk5 stable5
#: ui/kptmainprojectpanel.cpp:130
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "Directory where all the projects that share resources can be found"
msgstr ""
#. +> trunk5 stable5
#: ui/kptmainprojectpanel.cpp:136
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "Load shared resource assignments at startup"
"<para>Resources are organized in a Resource Breakdown Structure. Resources can be of type <emphasis>Work</emphasis> or <emphasis>Material</emphasis>. When assigned to a task, a resource of type <emphasis>Work</emphasis> can affect the duration of the task, while a resource of type <emphasis>Material</emphasis> does not. A resource must refer to a <emphasis>Calendar</emphasis> defined in the <emphasis>Work and Vacation Editor</emphasis>.<nl/>"
"<link url='%1'>More...</link></para>"
msgstr ""
#. +> trunk5 stable5
#: ui/kptresourceeditor.cpp:299
#, kde-format
msgid "Add Resource"
msgstr ""
#. +> trunk5
#: ui/kptresourceeditor.cpp:389
#, kde-kuit-format
msgctxt "@title"
msgid "Resource groups"
msgstr ""
#. +> trunk5 stable5
#: ui/kptscheduleeditor.cpp:182
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Schedule Editor</title>"
"<para>The Schedule Editor is used to create, edit, calculate and delete schedules.</para>"
"<para>If <emphasis>Mode</emphasis> is set to <emphasis>Auto</emphasis>, the schedule is calculated automatically. <note>Only one schedule can be in <emphasis>Auto Mode</emphasis> simultaneously and it must be a top level schedule without sub-schedules.</note></para>"
"<para>A schedule can have sub-schedules. A sub-schedule can use the projects progress data in order to reschedule only tasks that are not yet finished. Rescheduling will then use e.g. actual start and remaining effort for the tasks.<nl/>"
"This is not limited to persons available in a resource group but can be anyone. You can even directly access your address book with the Choose button."
msgid "Drag resources into the Task Editor and drop into the allocations- or responsible column"
msgstr ""
#. +> trunk5 stable5
#: ui/kpttaskeditor.cpp:492
#, kde-kuit-format
msgctxt "@title"
msgid "Task Modules"
msgstr ""
#. +> trunk5 stable5
#: ui/kpttaskeditor.cpp:493
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "Drag a task module into the <emphasis>Task Editor</emphasis> to add it to the project"
msgstr ""
#. +> trunk5 stable5
#: ui/kpttaskeditor.cpp:518
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Task Modules</title>"
"<para>Task Modules are a group of tasks that can be reused across projects. This makes it possible draw on past experience and to standardize similar operations.</para>"
"<para>A task module is a regular plan file and typically includes tasks, estimates and dependencies.</para>"
"<para><link url='%1'>More...</link></para>"
msgstr ""
#. +> trunk5 stable5
#: ui/kpttaskeditor.cpp:876
#, kde-format
msgid "Add Milestone"
msgstr ""
#. +> trunk5 stable5
#: ui/kpttaskeditor.cpp:891
#, kde-format
msgid "Add Sub-Milestone"
msgstr ""
#. +> trunk5 stable5
#: ui/kpttaskeditor.cpp:906
#, kde-format
msgid "Indent Task"
msgstr ""
#. +> trunk5 stable5
#: ui/kpttaskeditor.cpp:910
#, kde-format
msgid "Unindent Task"
msgstr ""
#. +> trunk5 stable5
#: ui/kpttaskeditor.cpp:914
#, kde-format
msgid "Move Up"
msgstr ""
#. +> trunk5 stable5
#: ui/kpttaskeditor.cpp:918
#, kde-format
msgid "Move Down"
msgstr ""
#. +> trunk5 stable5
#: ui/kpttaskeditor.cpp:1106
#, kde-format
msgctxt "(qtundo-format)"
msgid "Indent task"
msgid_plural "Indent %1 tasks"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: ui/kpttaskeditor.cpp:1125
#, kde-format
msgctxt "(qtundo-format)"
msgid "Unindent task"
msgid_plural "Unindent %1 tasks"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: ui/kpttaskeditor.cpp:1279
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Task Execution View</title>"
"<para>The view is used to edit and inspect task progress during project execution.</para>"
"<para>This view supports configuration and printing using the context menu.<nl/>"
"Scheduling Configuration. These settings affect the actual scheduling of the task.\n"
"\n"
"The estimation can be either effort based or duration based. If it is effort based, the final duration will depend on the resources assigned to the task. For duration based estimation, the assigned resources do not affect the fixed duration of the task, but only the costs."
"<para>This dialog consists of the following parts:"
"<list>"
"<item>Edit mode control to define the behavior of the dialog.</item>"
"<item>Controls to mark the task as started and finished.</item>"
"<item>Table to enter used effort for each resource.</item>"
"<item>Table for entry of task completion and remaining effort.</item>"
"</list>"
"</para>"
"<para>Edit modes:"
"<list>"
"<item><emphasis>Per resource</emphasis> requires you to enter used effort for each resource assigned to this task. This enables the most detailed tracking of effort- and cost usage.</item>"
"<item><emphasis>Per task</emphasis> enables you to enter the minimum of information. When completion is changed, used effort and remaining effort is automatically calculated, but can of course be manually modified if needed.</item>"
"</list>"
"<note>You should select the desired edit mode when starting the task.</note><nl/>"
"<para>The task dependency dialog enables you to easily add a predecessor to the selected task.<nl/>"
"When opened, it presents the previous task as the default predecessor. This is often the desired predecessor, and can be added by just pressing <interface>OK</interface>.<nl/>"
"The dropdown list of possible predecessors is sorted with the most likely tasks first.</para>"
+"<para>Resources can be organized in a Resource Breakdown Structure. The structure is purely organizational and has no impact on resource allocations.<nl/>"
"These values are used if your estimate is not in hours.\n"
"Let us say Hours per day is 8. If you estimate that a task needs 3 days effort to complete, this is converted to 24 hours when the task is scheduled. The actual time it will take to complete is of course dependent on the availability of the person (or persons) that is assigned to the task."
msgid "Failed to properly configure astrometry config file. Please click the options button in the lower right of the Astrometry Tab in Ekos to correct your settings. Then try starting Ekos again."
msgid "Explanation of the What's Interesting Panel"
msgstr ""
#. +> trunk5
#: data/qml/whatisinteresting/wiview.qml:1559
#, kde-kuit-format
msgid "The What's Interesting Panel is intended to allow you to explore many different interesting objects in the night sky. It includes objects visible to the naked eye as well as objects that require telescopes. It is intended to appeal to both beginners and advanced astronomers. If you click on a category or catalog, a list of objects will appear. Clicking on an object in the list will bring up the details view where you can find out more information about the object. If you have thumbnail images or wikipedia information for this object, these will be displayed as well. If not, you can download them using the download icon. If you make What's Interesting wider, the display will dynamically change to display the information more conveniently. Please see the descriptions below for details on what the buttons at the bottom do."
msgstr ""
#. +> trunk5
#: data/qml/whatisinteresting/wiview.qml:1581
#, kde-kuit-format
msgid "This button will bring up the What's Interesting Settings. It will let you configure what is displayed in What's Interesting based upon which equipment you are using and the observing conditions."
msgstr ""
#. +> trunk5
#: data/qml/whatisinteresting/wiview.qml:1602
#, kde-kuit-format
msgid "This button will turn on and off the Inspector Mode. In this mode you can click on any object in the map and What's Interesting will display the information about it."
msgstr ""
#. +> trunk5
#: data/qml/whatisinteresting/wiview.qml:1623
#, kde-kuit-format
msgid "This button will reload the current object list, update all displayed information, update any images, and update the information and images for the currently selected object."
msgstr ""
#. +> trunk5
#: data/qml/whatisinteresting/wiview.qml:1644
#, kde-kuit-format
msgid "This button will toggle whether to filter the list to display only currently visible objects in a list or to display all of the objects in the list. The visibility is determined based on the current KStars date and time, the current observing equipment, and the current sky conditions based on the What's Interesting Settings."
msgstr ""
#. +> trunk5
#: data/qml/whatisinteresting/wiview.qml:1665
#, kde-kuit-format
msgid "This button will toggle whether to filter the list to display only 'interesting' objects or to display any of the objects in the list. This setting only applies to the Galaxies, Nebulas, and Clusters lists. The objects are considered 'interesting' if they appear on the KStars 'interesting' list."
msgstr ""
#. +> trunk5
#: data/qml/whatisinteresting/wiview.qml:1686
#, kde-kuit-format
msgid "This button will attempt to download information and pictures about the object(s) from Wikipedia. You can select whether to download the information about just one object, all of the objects in a list, or only the objects in a list for which no data was downloaded yet. Please note: If the list is currently filtered for visible objects or 'interesting' objects, only the filtered objects will be downloaded. If you actually want all the objects in the list, turn off the filters."
msgid "To import an existing data file, enter its filename here. You will then describe the contents of the file below. You can leave the filename blank to construct a catalog file with a valid header, but no data."
"This button will compute the field-of-view (FOV) angle for a specific eyepiece/telescope combination. You must first specify the focal lengths of the telescope and eyepiece, and the FOV angle of the eyepiece in the above entry fields.\n"
"\n"
"The computed FOV angle (in arcminutes) will be displayed in the \"Field of view\" edit box."
"Enter the telescope focal length, in millimeters.\n"
"\n"
"This is one of the data fields required for defining a field-of-view (FOV) symbol which matches the field-of-view of a camera mounted on a telescope."
"Enter the physical size of the CCD chip or film negative.\n"
"\n"
"This is one of the data fields required for defining a field-of-view (FOV) symbol which matches the field-of-view of a camera mounted on a telescope."
"This button will compute the field-of-view (FOV) angle for a specific camera/telescope combination. You must first specify the focal length of the telescope and the size of the CCD chip or film negative.\n"
"\n"
"The computed FOV angle (in arcminutes) will be displayed in the \"Field of view\" edit box."
"This button will compute the Half Power Beam Width (HPBW) angle for a specific radiotelescope and observing wavelength combination, assuming no multibeam receiver is available at the telescope. You must first specify the diameter of the radiotelescope and the observing wavelength.\n"
"\n"
"The computed HPBW angle (in arcminutes) will be displayed in the \"Field of view\" edit box."
msgid "<p>Frame rotation with respect to Celestial Pole. Zero degrees indicates that <b>UP</b> is pointing directly at the pole. 90 degrees indicates that <b>UP</b> is rotated 90 degrees clockwise with respect to the pole.</p>"
msgid "Your data directory was not found. You can click the button below to copy a default KStars data directory to the correct location, or if you have a KStars directory already some place else, you can exit KStars and copy it to that location yourself."
msgid "Installing this in your data directory will enable the CCD Simulator in KStars to take realistic images. This is useful for testing sequences, plate solving, and learning to use KStars. Just click the button to install or unzip the zip file and place the gsc folder in the data directory."
"<p>You may now download optional data files to enhance KStars, such as Messier object images, or a more complete NGC/IC catalog. Press the <b>Download Extra Data</b> button to proceed. </p>"
"<p>You can also use this tool later, by selecting <b>Download New Data</b> from the <b>File</b> menu.</p>"
msgid "Are you sure you want to clear all of the solution points?"
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:1508
#, kde-format
msgid "Clear Solution Points"
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:1516
#, kde-format
msgid "Are you sure you want to clear all the alignment points?"
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:1517
#, kde-format
msgid "Clear Align Points"
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:1662
#, kde-format
msgid "The Mount Model Tool is Reset."
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:1699
#, kde-format
msgid "Please Check the Alignment Points."
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:1706
#, kde-format
msgid "In the Align Module, \"Nothing\" is Selected for the Solver Action. This means that the mount model tool will not sync/align your mount but will only report the pointing model errors. Do you wish to continue?"
msgid "Astrometry.net uses python3 and the astropy package for plate solving images offline. These were not detected on your system. Please go into the Align Options and either click the setup button to install them or uncheck the default button and enter the path to python3 on your system and manually install astropy."
msgid "Slewing to calibration position, please wait until telescope completes slewing."
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:4621
#, kde-format
msgid "Load Image"
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:4816
#, kde-format
msgid "World Coordinate System (WCS) is enabled. CCD rotation must be set either manually in the CCD driver or by solving an image before proceeding to capture any further images, otherwise the WCS information may be invalid."
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:4825
#, kde-format
msgid "World Coordinate System (WCS) is disabled."
msgid "Failed to process World Coordinate System: %1. Try again."
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:5607
#, kde-format
msgid "Celestial pole is located outside of the field of view. Would you like to sync and slew the telescope to the celestial pole? WARNING: Slewing near poles may cause your mount to end up in unsafe position. Proceed with caution."
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:5625
#, kde-format
msgid "Warning: Celestial pole is located outside the field of view. Move the mount closer to the celestial pole."
msgid "Accuracy threshold in arcseconds between solution and target coordinates. Plate solver shall be repeatedly executed until the solution coordinates are below the accuracy threshold"
msgid "The results from Astrometric Solutions from the Capture and Solve Tool, the Load and Slew Tool, and the Mount Model Tool will be displayed below."
msgid "Remove the selected row from the solutions table. This can be useful for getting rid of results that did not actually solve from the table and/or results that you do not need any more. It can clean up clutter on both the graph and table."
msgid "Launch the mount model tool. This tool enables you to create pre-programmed list of points to go to and solve. It can aid in building a pointing model for better accuracy."
"<p>This tool provides a simple method to polar align a German equatorial mount. <span style=\" font-weight:600;\">Park</span> your mount to home position where it <span style=\" font-weight:600;\">points</span> toward the celestial pole with the counter weight down. Select mount direction and speed and then click <span style=\" font-weight:600;\">Start</span> to begin the process.</p>"
msgid "<p>Adjust mount's Altitude and Azimuth knobs until the selected star is centered within the crosshair. Click <b>Refresh</b> to begin continuous capture. You are <b>Done</b> when star is centered.</p>"
msgid "<p>This tool can help your mount build a better pointing model by moving the mount to different points in the sky and solving captured images. This can increase the accuracy of your GOTOs. To qualify, your mount must be capable of improving its internal pointing model after each <b>Sync</b> commanded by Ekos. If this is not the case, then this tool is not suitable for your mount.</p>"
"<p>Select the type of objects/points added by the wizard.</p>"
"<p><span style=\" font-weight:600;\">Note:</span> all of the options except Fixed DEC start with a grid of RA/DEC points.</p>"
"\n"
"<ul>\n"
"<li><b>Any Stars:</b> The wizard searches for the nearest star.</li>"
"\n"
"<li><b>Any object:</b> The wizard searches for the nearest object of any type.</li>"
"\n"
"<li><b>Named Stars</b> The wizard searches for the nearest star in the currently visible star list. Note that the first named star might be fairly far from the intended point and also sometimes the same star could be the closest one for multiple points.</li>"
"\n"
"<li><b>Fixed DEC:</b> The wizard generates all points at the chosen DEC.</li>"
"\n"
"<li><b>Fixed Grid:</b> The wizard just uses the original grid without trying to pair it with objects.</li>"
msgid "Automatically generate the specified number of alignment points in the table below. They will be generated based on the options selected in this wizard."
msgid "The Number of points the wizard should generate. If this number is less than 5, it will generate them at the same DEC. After that they will be evenly distributed over RA and DEC. Note, if Fixed DEC is selected, all of the points will be at the same DEC."
msgid "These are the common names for the named stars that are currently up at your location. If you select a star, it will be added to the table below."
msgid "These are the Greek names for the brighter stars that are currently up at your location. If you select a star, it will be added to the table below."
msgid "Clear the entire table of alignment points below. Note that this will not affect your mount in any way. It will not clear your pointing model. It just clears the list of points so that if you run the mount model routine again, these points will not be included."
msgid "<p>Remove the selected row from the alignment point table below. Note that it does <b>not</b> command your mount to clear that point from the model, it just means that if you run the mount model routine, that point will not be included in the list.</p>"
msgid "Add an empty row to the alignment list so that you can manually add an RA and DE for a position you would like the telescope to slew to when doing the mount model routine."
msgid "Open the Find Object dialog so that you can select an object to get an RA and DEC automatically that you would like the telescope to slew to when doing the mount model routine."
msgid "Sort the alignment points, starting with the point closest to the current telescope position, to try to minimize the distance between each slew."
msgid "This is a table of alignment points that you would like the mount model routine to use in aligning your telescope. If you would like to add or remove points, you may use the buttons above. If you would like to run, pause, or stop the mount model routine, you may use the buttons below. You can directly edit an RA or DE for a particular point directly in the cells. Just be sure to follow the format hh:mm:ss. The object name is just provided for convenience and is not used. If you want to change the order of the alignment points, you can drag the row up or down using the vertical header for that row on the left."
msgid "Start or pause the mount model routine. It will slew to and astrometrically solve the list of points in the table above using the settings in the align module. If the routine was previously paused, it will pick up where it left off. If it was stopped or it had finished it will start the routine over again."
msgid "<p>Stop the mount model routine. It will <b>not</b> clear any points from your telescope's pointing model. It will stop the routine and any points currently being solved. If you run the mount model again after hitting stop, it will start the routine over again with the first point.</p>"
msgstr ""
#. +> trunk5
#: ekos/align/offlineastrometryparser.cpp:64
#, kde-format
msgid "Failed to find astrometry.net binaries. Please click the options button in the lower right of the Astrometry Tab in Ekos to correct your settings and make sure that astrometry.net is installed. Then try starting Ekos again."
msgstr ""
#. +> trunk5
#: ekos/align/offlineastrometryparser.cpp:65
#, kde-format
msgid "Missing astrometry files"
msgstr ""
#. +> trunk5
#: ekos/align/offlineastrometryparser.cpp:91
#, kde-format
msgid "Detected Astrometry.net version %1"
msgstr ""
#. +> trunk5
#: ekos/align/offlineastrometryparser.cpp:96
#, kde-format
msgid "Setting astrometry option --no-fits2fits"
msgstr ""
#. +> trunk5
#: ekos/align/offlineastrometryparser.cpp:101
#, kde-format
msgid "Turning off option --no-fits2fits"
msgstr ""
#. +> trunk5
#: ekos/align/offlineastrometryparser.cpp:195
#, kde-format
msgid "Index file %1 is missing. Astrometry.net would not be able to adequately solve plates until you install the missing index files. Download the index files from http://astrometry.net"
msgstr ""
#. +> trunk5
#: ekos/align/offlineastrometryparser.cpp:199
#, kde-format
msgid "Index files %1 to %2 are missing. Astrometry.net would not be able to adequately solve plates until you install the missing index files. Download the index files from http://astrometry.net"
msgstr ""
#. +> trunk5
#: ekos/align/offlineastrometryparser.cpp:282
#: ekos/align/offlineastrometryparser.cpp:301
#, kde-format
msgid "Sextractor file write error."
msgstr ""
#. +> trunk5
#: ekos/align/offlineastrometryparser.cpp:314
#, kde-format
msgid "Starting sextractor..."
msgstr ""
#. +> trunk5
#: ekos/align/offlineastrometryparser.cpp:414
#, kde-format
msgid "WCS header missing or corrupted. Solver failed."
msgstr ""
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:82
#, kde-format
msgid "Error: no connection to the Internet."
msgstr ""
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:197
#, kde-format
msgid "Failed to open the file %1: %2"
msgstr ""
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:268
#, kde-format
msgid "Uploading file..."
msgstr ""
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:341
#, kde-format
msgid "JSON error during parsing (%1)."
msgstr ""
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:359
#, kde-format
msgid "Astrometry.net authentication failed. Check the validity of the Astrometry.net API Key."
msgstr ""
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:367
#, kde-format
msgid "Authentication to astrometry.net is successful. Session: %1"
msgstr ""
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:376
#, kde-format
msgid "Upload failed."
msgstr ""
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:385
#, kde-format
msgid "Parsing submission ID failed."
msgstr ""
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:390
#, kde-format
msgid "Upload complete. Waiting for astrometry.net solver to complete..."
msgstr ""
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:413
#, kde-format
msgid "Failed to retrieve job ID."
msgstr ""
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:447
#, kde-format
msgid "Solver failed after %1 second."
msgid_plural "Solver failed after %1 seconds."
msgstr[0] ""
msgstr[1] ""
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:457
#, kde-format
msgid "Error parsing parity."
msgstr ""
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:464
#, kde-format
msgid "Error parsing orientation."
msgstr ""
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:472
#, kde-format
msgid "Error parsing RA."
msgstr ""
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:479
#: ekos/align/onlineastrometryparser.cpp:487
#, kde-format
msgid "Error parsing DEC."
msgstr ""
#. +> trunk5
#: ekos/align/opsalign.cpp:39
#, kde-format
msgid "Internal or External astrometry.cfg?"
msgstr ""
#. +> trunk5
#: ekos/align/opsalign.cpp:45
#, kde-format
msgid "Internal or External Plate Solver?"
msgstr ""
#. i18n: ectx: label, entry (AstrometryWCSIsInternal), group (Align)
#. +> trunk5
#: ekos/align/opsalign.cpp:50 kstars.kcfg:1997
#, kde-format
msgid "Internal or External wcsinfo?"
msgstr ""
#. i18n: ectx: label, entry (SextractorIsInternal), group (Align)
#. +> trunk5
#: ekos/align/opsalign.cpp:55 kstars.kcfg:2024
#, kde-format
msgid "Internal or External sextractor?"
msgstr ""
#. +> trunk5
#: ekos/align/opsalign.cpp:86
#, kde-format
msgid "Homebrew, python, and astropy are already installed"
msgstr ""
#. +> trunk5
#: ekos/align/opsalign.cpp:90
#, kde-format
msgid ""
"This installer will install the following requirements for astrometry.net if they are not installed:\n"
"Homebrew -an OS X Unix Program Package Manager\n"
"Python3 -A Powerful Scripting Language \n"
"Astropy -Python Modules for Astronomy \n"
" Do you wish to continue?"
msgstr ""
#. +> trunk5
#: ekos/align/opsalign.cpp:91
#, kde-format
msgid "Install and Configure Python"
msgstr ""
#. +> trunk5
#: ekos/align/opsalign.cpp:101
#, kde-format
msgid ""
"Homebrew is not installed. \n"
"A Terminal window will pop up for you to install Homebrew. \n"
" When you are all done, then you can close the Terminal and click the setup button again."
msgstr ""
#. +> trunk5
#: ekos/align/opsalign.cpp:123
#, kde-format
msgid ""
"Homebrew installed \n"
"Python3 will install when you click Ok \n"
"Astropy waiting . . . \n"
" (Note: this might take a few minutes, please be patient.)"
msgstr ""
#. +> trunk5
#: ekos/align/opsalign.cpp:128
#, kde-format
msgid "Python install failure"
msgstr ""
#. +> trunk5
#: ekos/align/opsalign.cpp:134
#, kde-format
msgid ""
"Homebrew installed \n"
"Python3 installed \n"
"Astropy will install when you click Ok \n"
" (Note: this might take a few minutes, please be patient.)"
msgstr ""
#. +> trunk5
#: ekos/align/opsalign.cpp:139
#, kde-format
msgid "Astropy install failure"
msgstr ""
#. +> trunk5
#: ekos/align/opsalign.cpp:143
#, kde-format
msgid "All installations are complete and ready to use."
"<p>On Load & Slew, solve the image and slew the mount to the target location and then rotate the camera to match the orientation of the FITS image.</p>"
"<p>Rotator threshold in arc-minutes when using Load & Slew. If the difference between measured position angle and FITS position angle is below this value, the Load & Slew operation is considered successful.</p>"
"<p>Automatically park mount after completing Polar Alignment Assistant Tools. Beware that turning this option off might lead to inaccurate results.</p>"
msgid "This will prevent the solver from looking at an already existing WCS Header before blindly trying to solve the image. It is recommended to keep it checked."
msgid "Do not use Sync when Slew to Target is selected. Use differential slewing to correct for discrepancies. This is useful on some mounts (e.g. Paramount)."
"<p><span style=\" font-weight:600;\">Offline</span> astrometry.net solver requires index files in order to solve an image. Please see the Astrometry.net <a href=\"http://astrometry.net/doc/readme.html\"><span style=\" text-decoration: underline; color:#0000ff;\">README</span></a> for details. The following list provides a complete list of the index files, along with recommended index files to install given the current CCD Field of View. Installed index files are checked. Next to each index file is an icon that represents the following:</p>"
"<p>This button will open the Astrometry Index File folder on your filesystem so that you can see where it is located and copy files into it if needed.</p>"
"<p>Enable Logs to diagnose issues with Ekos and INDI. Only enable the necessary logs to help in diagnosing specific problems. Logs consume resources and may slow the system down. Turn off logs when no longer used.</p>"
msgid "To assign a permanent designation to the device, you need to unplug the device from stellarmate then replug it after 1 second. Click on the <b>Start Scan</b> to begin this procedure."
msgstr ""
#. +> trunk5
#: ekos/auxiliary/serialportassistant.cpp:91
#, kde-format
msgid "Start Scan"
msgstr ""
#. +> trunk5
#: ekos/auxiliary/serialportassistant.cpp:94
#, kde-format
msgid "Home"
msgstr ""
#. +> trunk5
#: ekos/auxiliary/serialportassistant.cpp:99
#, kde-format
msgid "Skip Device"
msgstr ""
#. +> trunk5
#: ekos/auxiliary/serialportassistant.cpp:103
#, kde-format
msgid "Physical Port Mapping"
msgstr ""
#. +> trunk5
#: ekos/auxiliary/serialportassistant.cpp:105
#, kde-format
msgid "Assign the permanent name based on which physical port the device is plugged to in StellarMate. This is useful to distinguish between two identical USB adapters. The device must <b>always</b> be plugged into the same port for this to work."
msgstr ""
#. +> trunk5
#: ekos/auxiliary/serialportassistant.cpp:142
#, kde-format
msgid "Standby, Scanning..."
msgstr ""
#. +> trunk5
#: ekos/auxiliary/serialportassistant.cpp:180
#, kde-format
msgctxt "Vendor ID"
msgid "VID"
msgstr ""
#. +> trunk5
#: ekos/auxiliary/serialportassistant.cpp:181
#, kde-format
msgctxt "Product ID"
msgid "PID"
msgstr ""
#. +> trunk5
#: ekos/auxiliary/serialportassistant.cpp:182
#, kde-format
msgid "Link"
msgstr ""
#. +> trunk5
#: ekos/auxiliary/serialportassistant.cpp:183
#, kde-format
msgid "Serial #"
msgstr ""
#. +> trunk5
#: ekos/auxiliary/serialportassistant.cpp:184
#, kde-format
msgid "Hardware Port?"
msgstr ""
#. +> trunk5
#: ekos/auxiliary/serialportassistant.cpp:241
#, kde-format
msgid "Start Scanning"
msgstr ""
#. +> trunk5
#: ekos/auxiliary/serialportassistant.cpp:268
#, kde-format
msgid "Failed to scan devices."
msgstr ""
#. +> trunk5
#: ekos/auxiliary/serialportassistant.cpp:276
#: ekos/auxiliary/serialportassistant.cpp:286
#, kde-format
msgid "Failed to detect any devices. Please make sure device is powered and connected to StellarMate via USB."
msgstr ""
#. +> trunk5
#: ekos/auxiliary/serialportassistant.cpp:324
#, kde-format
msgid "Duplicate devices detected. You must remove one mapping or enable hardware slot mapping."
msgstr ""
#. +> trunk5
#: ekos/auxiliary/serialportassistant.cpp:343
#, kde-format
msgid "Mapping is successful. Please unplug and replug your device again now."
"<p>This tool shall assign <span style=\" font-style:italic;\">permanent</span> names to your <span style=\" font-weight:600;\">Serial to USB</span> devices so that they are easier to connect to in the future.</p>"
"<p><br/>"
"</p>"
"<p>Click <span style=\" font-weight:600;\">Next</span> to continue.</p>"
"<p>Accept ADU values that fall within this range around the desired ADU target. For example, if the ADU value was set to 10000 and the tolerance was set to 100, then frames with ADU values f 9900 and 10100 shall be accepted.</p>"
msgid "Meridian flip configuration has been shifted to the mount module. Please configure the meridian flip there."
msgstr ""
#. +> trunk5
#: ekos/capture/capture.cpp:4053
#, kde-format
msgid "Save Ekos Sequence Queue"
msgstr ""
#. +> trunk5
#: ekos/capture/capture.cpp:4083
#, kde-format
msgid "Failed to save sequence queue"
msgstr ""
#. +> trunk5
#: ekos/capture/capture.cpp:4117
#, kde-format
msgid "Could not open file"
msgstr ""
#. +> trunk5
#: ekos/capture/capture.cpp:4137
#, kde-format
msgid "Warning: HFR-based autofocus is set but option \"Save Sequence HFR Value to File\" is not enabled. Current HFR value will not be written to sequence file."
msgstr ""
#. +> trunk5
#: ekos/capture/capture.cpp:4244
#, kde-format
msgid "Sequence queue saved to %1"
msgstr ""
#. +> trunk5
#: ekos/capture/capture.cpp:4268
#, kde-format
msgid "Are you sure you want to reset status of all jobs?"
#. i18n("Ekos will refocus in %1 seconds, last procedure was %2 seconds ago.", refocusEveryNTimer.elapsed()/1000-refocusEveryNTimer.elapsed()*60, refocusEveryNTimer.elapsed()/1000));
#. +> trunk5
#: ekos/capture/capture.cpp:6253
#, kde-format
msgid "Ekos will refocus in %1 seconds, last procedure was %2 seconds ago."
msgstr ""
#. +> trunk5
#: ekos/capture/capture.cpp:6257
#, kde-format
msgid "Ekos will refocus as soon as possible, last procedure was %1 seconds ago."
"<li><strong>Client</strong>: Captured images are only uploaded to Ekos.</li>"
"\n"
"<li><strong>Local</strong>: Captured images are only saved locally on the remote computer.</li>"
"\n"
"<li><strong>Both</strong>: Captured images are saved on remote device <b>and</b> uploaded to Ekos.</li>"
"\n"
"</ol>"
"\n"
"<p>When selecting <i>Local</i> or <i>Both</i>, you must specify the remote directory where the remote images are saved to. By default, all captured images are uploaded to Ekos."
"<p>Select custom properties to be set when the sequence job is executed in batch mode. After the desired property value is set in INDI Control Panel, add it to the<span style=\" font-weight:600;\"> Job Properties</span> section. Click <span style=\" font-weight:600;\">Apply</span> to record the property values.</p>"
"<p>Please fill the required information below. This is a one-time setup. You can obtain these values from your camera manual or from online sources such as <a href=\"https://www.digicamdb.com/\"><span style=\" text-decoration: underline; color:#007af4;\">Digital Camera Database</span></a>.</p>"
"<p>Set the <span style=\" font-weight:600;\">desired</span> target position angle for a sequence job. Click OK then add the sequence job to the sequence queue. When the job is executed, the position angle is first set to this target value prior to capturing the image.</p>"
"<p>Position Angle (PA) is defined as degrees E of N. Zero degrees indicate frame <span style=\" font-weight:600;\">UP</span> points directly toward the celestial pole. 90 degrees indicate frame <span style=\" font-weight:600;\">UP</span> points 90 degrees counter-clockwise with respect to the celestial pole.</p>"
"<p>PA is calculated from raw rotator angle plus modifiers to match the rotation angle as measured by astrometry. Enter the modifiers manually or solve an image in the Align Module to generate them automatically.</p>"
"<p>Measure average HFR from all stars combined in a full frame. This method defaults to the Centroid detection, but can use SEP detection too. Its performance decreases as the number of stars increases.</p>"
"<p>During full field focusing, stars which are inside this percentage of the frame are filtered out of HFR calculation (default 0%). Detection algorithms may also have an inherent filter.</p>"
"<p>During full field focusing, stars which are outside this percentage of the frame are filtered out of HFR calculation (default 100%). Detection algorithms may also have an inherent filter.</p>"
"<li style=\" margin-top:12px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-weight:600;\">Iterative</span>: Moves focuser by discreet steps initially decided by the step size. Once a curve slope is calculated, further step sizes are calculated to reach optimal solution. The algorithm stops when the measured HFR is within percentage tolerance of the minimum HFR recorded in the procedure.</li>"
"<li style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-weight:600;\">Polynomial</span>: Starts with iterative method. Upon crossing to the other side of the V-Curve, polynomial fitting coefficients along with possible minimum solution are calculated. This algorithm can be faster than purely iterative approach given a good data set.</li>"
"<li style=\" margin-top:0px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-weight:600;\">Linear</span>: Samples focus inward in a regular fashion, using 2 passes. The algorithm can be slow, but it is more resilient to backlash. Start with the focuser positioned near good focus. Set Initial Step Size and Max Travel for the desired sampling interval and range around start focus position. Tolerance should be around 5%.</li>"
msgid "<b>Initial</b> step size in ticks to cause a noticeable change in HFR value. For timer based focuser, it is the initial time in milliseconds to move the focuser inward or outward"
"<p>The maximum single step size the algorithm is allowed to command as it searches for the critical focus zone. The calculated step size would be limited to this maximum value.</p>"
msgctxt "Drift graphics tooltip; %1 is local time; %2 is RA deviation; %3 is DE deviation in arcseconds; %4 is RA Pulse in ms; %5 is DE Pulse in ms"
msgid ""
"<table>"
"<tr>"
"<td>LT: </td>"
"<td>%1</td>"
"</tr>"
"<tr>"
"<td>RA: </td>"
"<td>%2 \"</td>"
"</tr>"
"<tr>"
"<td>DE: </td>"
"<td>%3 \"</td>"
"</tr>"
"<tr>"
"<td>RA Pulse: </td>"
"<td>%4 ms</td>"
"</tr>"
"<tr>"
"<td>DE Pulse: </td>"
"<td>%5 ms</td>"
"</tr>"
"</table>"
msgstr ""
#. +> trunk5
#: ekos/guide/guide.cpp:496
#, kde-format
msgid "Export Guide Data"
msgstr ""
#. +> trunk5
#: ekos/guide/guide.cpp:549
#, kde-format
msgid "Guide Data Saved as: %1"
msgstr ""
#. +> trunk5
#: ekos/guide/guide.cpp:651
#, kde-format
msgid "PHD2's current camera: %1, is NOT connected to Ekos. The PHD2 Guide Star Image will be received, but the full external guide frames cannot."
msgstr ""
#. +> trunk5
#: ekos/guide/guide.cpp:659
#, kde-format
msgid "PHD2's current camera: %1, IS connected to Ekos. You can select whether to use the full external guide frames or just receive the PHD2 Guide Star Image using the SubFrame checkbox."
msgstr ""
#. +> trunk5
#: ekos/guide/guide.cpp:861
#, kde-format
msgid "Connection to the guide CCD is lost."
msgstr ""
#. +> trunk5
#: ekos/guide/guide.cpp:1183
#, kde-format
msgid "Exposure timeout. Aborting Autoguide."
msgstr ""
#. +> trunk5
#: ekos/guide/guide.cpp:1185
#, kde-format
msgid "Exposure timeout. Aborting Dithering."
msgstr ""
#. +> trunk5
#: ekos/guide/guide.cpp:1187
#, kde-format
msgid "Exposure timeout. Aborting Calibration."
msgstr ""
#. +> trunk5
#: ekos/guide/guide.cpp:1460
#, kde-format
msgid "The guide camera is identical to the primary imaging camera. Are you sure you want to continue?"
msgstr ""
#. +> trunk5
#: ekos/guide/guide.cpp:1467
#, kde-format
msgid "The mount is parked. Unpark to start guiding."
msgstr ""
#. +> trunk5
#: ekos/guide/guide.cpp:1557
#, kde-format
msgid "Pier side change detected. Clearing calibration."
msgid "To receive PHD2 images other than the Guide Star Image, SubFrame must be unchecked. Unchecking it now to enable your image captures. You can re-enable it before Guiding"
"<p>Subframe the image around the guide star. Or for PHD2, receive the Guide Star Image instead of the full image frame. For the Internal Guider, before checking this option, you must <span style=\" font-weight:600;\">first</span> capture an image and select a guide star. Uncheck it to take a full frame again.</p>"
msgid "Mount guiding rate. Find out the guiding rate used by your mount and update the value here to get the <b>recommended</b> value of proportional gain suitable for your mount. Setting this value <b>does not</b> change your mount guiding rate."
"<p>Proportional term accounts for present values of the error. For example, if the error is large and positive, the guider corrective pulse will also be large and positive.</p>"
"<p>Integral term accounts for past values of the error. For example, if the current pulse is not sufficiently strong, the integral of the error will accumulate over time, and the guider will respond by applying a stronger action.</p>"
msgid "Maximum deviation to correct for using Adaptive Optics unit. If the guiding deviation exceeds this value, Ekos will guide the mount mechanically"
"<p>Drag the slider to scroll through guide history while displaying the RA and DEC error points on both graphs. Dragging to the far right will set the guide plots to display the latest guide data and autoscroll the graph.</p>"
"<p>Autoscale both Guide Graphs to their default scale. If any points are located outside this range, the view is expanded to include them (with the exception of the time axis in the drift graphics).</p>"
"<p>Request a meridian flip if the hour angle exceeds the specified value. Capture and Guiding will be suspended and resumed after the flip is complete.</p>"
"<p>Set Hour Angle unit to Degrees. Add 1 degree to the mount meridian flip setting. For example, if the mount meridian flip limit is set to 5 degrees, set the value here to be <span style=\" font-weight:600;\">at least</span> 6 degrees to ensure a successful meridian flip.</p>"
"<p>Enable or Disable the mount travel range limits. Once enabled, Ekos monitors the mount's altitude while slewing or tracking. If the mount slews/tracks below or above the limits, it shall be commanded to stop and tracking will be turned off.</p>"
"<p>Lead time is the minimum time in minutes between jobs. The scheduler starts execution of a job before its scheduled startup time by this lead time. Early execution is useful as focusing, alignment, and guiding procedures may take prolonged periods to time to complete.</p>"
"<p>In case no scheduler job is scheduled for this many hours, perform a complete shutdown procedure and restart observatory operations once the next job is ready.</p>"
"<p>Do not permit jobs to be scheduled less than this many degrees before the altitude restriction. Actual execution proceeds until the altitude limit.</p>"
"<p>If guiding calibration fails then restart alignment process before proceeding to guiding recalibration process again. This can help recenter the target object in the field of view if the calibration process strayed too far off.</p>"
msgid "Maximum acceptable difference between requested and measured temperature set point. When the temperature threshold is below this value, the temperature set point request is deemed successful."
#. i18n: ectx: label, entry (AlwaysResetSequenceWhenStarting), group (Capture)
#. +> trunk5
#: ekos/opsekos.ui:522 kstars.kcfg:1667
#, kde-format
msgid ""
"<html><head/><body>"
"<p>When starting to process a sequence list, reset all capture counts to zero. Scheduler overrides this option when Remember Job Progress is enabled.</p>"
"<p>If using a filter wheel and an absolute position focuser, then always remember the focus position of the autofocus process for light frames in each filter. Before a flat frame is captured, the focuser is moved to the same focus point as light frames.</p>"
"<p>Set HFR Threshold percentage gain. When an autofocus operation is completed, the autofocus HFR value is increased by this threshold percentage value and stored within the capture module. If In-Sequence-Focus is engaged, the autofocus module only performs autofocusing procedure if current HFR value exceeds the capture module HFR threshold. Increase value to permit more relaxed changes in HFR values without requiring a full autofocus run.</p>"
"<p>Calculate median focus value after each autofocus operation is complete. If the autofocus results become progressively worse with time, the median value shall reflect this trend and prevent unnecessary autofocus operations when the seeing conditions deteriorate.</p>"
"<p>In-Sequence HFR threshold value controls when the autofocus process is started. If the measured HFR value exceeds the HFR threshold, autofocus process is initiated. If the HFR threshold value is zero initially (default), then the autofocus process best HFR value is used to set the new HFR threshold, after applying the HFR threshold modifier percentage. This new HFR threshold is then used for subsequent In-Sequence focus checks. If this option is enabled, the HFR threshold value is constant and gets saved to the sequence file.</p>"
#. i18n: ectx: label, entry (MaxDarkTemperatureDiff), group (DarkLibrary)
#. +> trunk5
#: ekos/opsekos.ui:818 kstars.kcfg:1525
#, kde-format
msgid "Maximum acceptable difference between current and recorded dark frame temperature set point. When the difference exceeds this value, a new dark frame shall be captured for this set point."
"<p>Specify Remote drivers to chain with INDI server. Remote INDI drivers must be already running. If port is different from the default (7624), then it must be specified. For example, to connect to ZWO ASI120MC driver running on 192.168.1.50 on port 8000, the connection string is:</p>"
"<p>Welcome to the <span style=\" font-weight:600;\">Ekos Profile Wizard</span></p>"
"<p>Ekos is the premier observatory control and automation platform. With Ekos, you can capture images and gather scientific data with ease. This Wizard will help you create your equipment profile. You will be asked to verify some basic information. </p>"
"<p>Please click <span style=\" font-weight:600;\">next</span> to continue. </p>"
"<p><a href=\"https://github.com/knro/indiwebmanager\"><span style=\" text-decoration: underline; color:#007af4;\">INDI Web Manager</span></a> running on the Remote Computer?</p>"
"<p><span style=\" font-weight:600;\">Tip</span>: <span style=\" font-style:italic;\">INDI Web Manager</span> is a service that runs on remote devices to help you start and stop INDI services remotely.</p>"
"<p><span style=\" font-weight:600;\">Tip</span>: External INDI Server can be <a href=\"http://www.cloudmakers.eu/indigoserver/\"><span style=\" text-decoration: underline; color:#007af4;\">INDI Server for OSX</span></a> or an INDI Server launched manually locally. If unsure, select Internal INDI Server.</p>"
"<p><span style=\" font-weight:600;\">Tip</span>: Internal Guider is recommended. Using external guider applications requires additional setup instructions outside the scope of Ekos.</p>"
"<p>If the remote computer has astrometry.net installed, you can run the remote astrometry driver and use it to solve images in Ekos Align module.</p>"
"<p>Use the INDI WatchDog driver. It monitors connection between your remote equipment and Ekos. If the communication is lost between the two, the WatchDog driver goes into safe mode and executes a shutdown procedure to protect your equipment.</p>"
"<p>If you plan to use SkySafari to monitor and/or control your mount, check this box to start INDI SkySafari Server. You can connect SkySafari to this server and it shall enable you to connect and control your mount. For more details, please check the <a href=\"https://indilib.org/devices/telescopes/skysafari.html\"><span style=\" text-decoration: underline; color:#007af4;\">INDI SkySafari Documentation.</span></a></p>"
msgid "Camera's rotation angle (East of North) in degrees. To measure the angle, solve an image and use the astrometry solver solution's rotation angle"
msgid "Warning: job '%1' has startup time %2 resulting in a negative score, and will be marked invalid when processed."
msgstr ""
#. +> trunk5
#: ekos/scheduler/scheduler.cpp:795
#, kde-format
msgid "Warning: job '%1' at row %2 has a duplicate target at row %3, the scheduler may consider the same storage for captures."
msgstr ""
#. +> trunk5
#: ekos/scheduler/scheduler.cpp:803
#, kde-format
msgid "Warning: jobs '%1' at row %2 and %3 probably require a different repeat count as currently they will complete simultaneously after %4 batches (or disable option 'Remember job progress')"
msgstr ""
#. +> trunk5
#: ekos/scheduler/scheduler.cpp:808
#, kde-format
msgid "Warning: job '%1' at row %2 might require a specific startup time or a different priority, as currently they will start in order of insertion in the table"
msgstr ""
#. +> trunk5
#: ekos/scheduler/scheduler.cpp:982
#, kde-format
msgid "Warning: you cannot add or modify a job while the scheduler is running."
msgstr ""
#. +> trunk5
#: ekos/scheduler/scheduler.cpp:1050
#, kde-format
msgid "Use edition fields to create a new job in the observation list."
msgstr ""
#. +> trunk5
#: ekos/scheduler/scheduler.cpp:1314
#, kde-format
msgid "Job '%1' has not been processed upon scheduler stop, marking aborted."
msgstr ""
#. +> trunk5
#: ekos/scheduler/scheduler.cpp:1321
#, kde-format
msgid "Scheduler aborted."
msgstr ""
#. +> trunk5
#: ekos/scheduler/scheduler.cpp:1380
#, kde-format
msgid "Scheduler is in shutdown until next job is ready"
msgid "Select optional FITS file to be used for alignment. When using FITS, specify the object or the estimated coordinates which are used to slew the mount."
msgid "Start the observation job when the object reaches culmination adjusted for the offset value in minutes. By default, the observation job runs 60 minutes prior to culmination."
"<p>The twilight restriction constrains jobs to execute in astronomical darkness. Use the dusk and dawn offsets in the Ekos Scheduler options to adjust the interval.</p>"
"<p>One-time shutdown procedure to be executed after all scheduler jobs are completed. The script is executed <span style=\" font-weight:600; text-decoration: underline;\">after</span> the shutdown procedures (e.g. parking), if selected, are completed.</p>"
"<li style=\" margin-top:12px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-weight:600;\">Don't re-schedule</span>: Don't restart the job in case of an error or an abort.</li>"
"<li style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-weight:600;\">Re-schedule after all terminated</span>: If a job gets aborted, the scheduler will only re-schedule it if when all jobs are finished or aborted. If this is the case, the scheduler re-schedules all aborted jobs and sleeps for the given delay.</li>"
"<li style=\" margin-top:0px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-weight:600;\">Re-schedule immediately</span>: As soon as a job gets aborted, the scheduler will re-schedule it and waits the given delay.</li>"
"</ul>"
"<p>If the option for re-scheduling errors is selected, errors are handled like aborts. Otherwise, jobs that step into an error are never re-scheduled.</p>"
"<p>One-time startup procedure to be executed before starting Ekos. The script is executed <span style=\" font-weight:600; text-decoration: underline;\">before</span> the startup procedures (e.g. unpark scope), if selected, are executed.</p>"
"Current status of job '%1', managed by the Scheduler.\n"
"If invalid, the Scheduler was not able to find a proper observation time for the target.\n"
"If aborted, the Scheduler missed the scheduled time or encountered transitory issues and will reschedule the job.\n"
"If complete, the Scheduler verified that all sequence captures requested were stored, including repeats."
msgstr ""
#. +> trunk5
#: ekos/scheduler/schedulerjob.cpp:239
#, kde-format
msgid ""
"Current altitude of the target of job '%1'.\n"
"A rising target is indicated with an arrow going up.\n"
"A setting target is indicated with an arrow going down."
msgstr ""
#. +> trunk5
#: ekos/scheduler/schedulerjob.cpp:249
#, kde-format
msgid ""
"Startup time for job '%1', as estimated by the Scheduler.\n"
"The altitude at startup, if available, is displayed too.\n"
"Fixed time from user or culmination time is marked with a chronometer symbol. "
msgstr ""
#. +> trunk5
#: ekos/scheduler/schedulerjob.cpp:259
#, kde-format
msgid ""
"Completion time for job '%1', as estimated by the Scheduler.\n"
"You may specify a fixed time to limit duration of looping jobs. A warning symbol indicates the altitude at completion may cause the job to abort before completion.\n"
msgstr ""
#. +> trunk5
#: ekos/scheduler/schedulerjob.cpp:269
#, kde-format
msgid ""
"Count of captures stored for job '%1', based on its sequence job.\n"
"This is a summary, additional specific frame types may be required to complete the job."
msgstr ""
#. +> trunk5
#: ekos/scheduler/schedulerjob.cpp:278
#, kde-format
msgid ""
"Current score for job '%1', from its altitude, moon separation and sky darkness.\n"
"Negative if adequate altitude is not achieved yet or if there is no proper observation time today.\n"
"The Scheduler will refresh scores when picking a new candidate job."
msgstr ""
#. +> trunk5
#: ekos/scheduler/schedulerjob.cpp:288
#, kde-format
msgid ""
"Time interval from the job which precedes job '%1'.\n"
"Adjust the Lead Time in Ekos options to increase that duration and leave time for jobs to complete.\n"
"Rearrange jobs to minimize that duration and optimize your imaging time."
msgstr ""
#. +> trunk5
#: ekos/scheduler/schedulerjob.cpp:374
#, kde-format
msgid ""
"Duration job '%1' will take to complete when started, as estimated by the Scheduler.\n"
"Depends on the actions to be run, and the sequence job to be processed."
"<li style=\" margin-top:12px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-weight:600;\">Auto Debayer</span>: Bayered images will not be debayered. Only grayscale images are shown.</li>"
"<li style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-weight:600;\">Auto WCS</span>: World Coordinate System data will not be processed. WCS maps sky coordinates to image coordinates. Equatorial grid lines, object identification, and telescope slew within an image are disabled.</li>"
"<li style=\" margin-top:0px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-weight:600;\">3D Cube</span>: RGB images will not be processed. Only grayscale images are shown.</li>"
"<p>Automatically load World-Coordinate-System (WCS) data when opening a FITS file.</p>"
"<p><span style=\" font-weight:600;\">Warning: Only enable this option on very fast machines as it can lead to unpredictable behavior resulting in crashes on slower machines.</span></p>"
"<p>To create an <span style=\" font-weight:600;\">Alias</span> from an existing driver, select an existing driver and then only change the <span style=\" font-weight:600;\">Label </span>then press<span style=\" font-weight:600;\"> Add.</span></p>"
"<p>Mount handset is the master source of time and location settings. KStars time and location settings are synchronized with controller settings.</p>"
"<p>Set SER video <b>remote</b> directory name. If INDI server is running locally, then a local directory can be selected. However, if you are connected to a remote INDI server, then the directory must be a valid directory on the remote file system where it is saved.</p>"
"\n"
"<p>Record directories may contain some patterns to make them dynamic:</p>"
"Verify if the following time, date, and location settings are correct. If any of the settings are incorrect, you can correct them via the <tt>Set time</tt> and <tt>Set Location</tt> buttons.\n"
"Enter the port number your telescope is connected to. If you only have one serial port in your computer, the port is usually <tt>/dev/ttyUSB0</tt>\n"
"<br>"
"<br>"
"If you are unsure about the port number, you can leave the field empty and KStars will try to scan the ports for attached telescopes. Beware that the autoscan process might take a few minutes to complete. "
msgid "Switch to horizonal view (Horizontal &Coordinates)"
msgstr ""
#. i18n: ectx: label, entry (PositionTimeBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:9
#, kde-format
msgid "Position of the time InfoBox."
msgstr ""
#. i18n: ectx: whatsthis, entry (PositionTimeBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:10
#, kde-format
msgid "The screen coordinates of the Time InfoBox."
msgstr ""
#. i18n: ectx: label, entry (PositionFocusBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:14
#, kde-format
msgid "Position of the focus InfoBox."
msgstr ""
#. i18n: ectx: whatsthis, entry (PositionFocusBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:15
#, kde-format
msgid "The screen coordinates of the Focus InfoBox."
msgstr ""
#. i18n: ectx: label, entry (PositionGeoBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:19
#, kde-format
msgid "Position of the geographic InfoBox."
msgstr ""
#. i18n: ectx: whatsthis, entry (PositionGeoBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:20
#, kde-format
msgid "The screen coordinates of the Geographic Location InfoBox."
msgstr ""
#. i18n: ectx: label, entry (ShadeTimeBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:24
#, kde-format
msgid "Is the time InfoBox in the \"shaded\" state?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShadeTimeBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:25
#, kde-format
msgid "If true, the Time InfoBox will show only its top line of data."
msgstr ""
#. i18n: ectx: label, entry (ShadeFocusBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:29
#, kde-format
msgid "Is the focus InfoBox in the \"shaded\" state?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShadeFocusBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:30
#, kde-format
msgid "If true, the Focus InfoBox will show only its top line of data."
msgstr ""
#. i18n: ectx: label, entry (ShadeGeoBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:34
#, kde-format
msgid "Is the geographic InfoBox in the \"shaded\" state?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShadeGeoBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:35
#, kde-format
msgid "If true, the Geographic Location InfoBox will show only its top line of data."
msgstr ""
#. i18n: ectx: label, entry (ShowInfoBoxes), group (GUI)
#. +> trunk5
#: kstars.kcfg:39
#, kde-format
msgid "Meta-option to toggle display of all InfoBoxes"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowInfoBoxes), group (GUI)
#. +> trunk5
#: kstars.kcfg:40
#, kde-format
msgid "Toggles display of all three InfoBoxes."
msgstr ""
#. i18n: ectx: label, entry (ShowTimeBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:44
#, kde-format
msgid "Display the time InfoBox?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowTimeBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:45
#, kde-format
msgid "Toggles display of the Time InfoBox."
msgstr ""
#. i18n: ectx: label, entry (ShowFocusBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:49
#, kde-format
msgid "Display the focus InfoBox?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowFocusBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:50
#, kde-format
msgid "Toggles display of the Focus InfoBox."
msgstr ""
#. i18n: ectx: label, entry (ShowGeoBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:54
#, kde-format
msgid "Display the geographic InfoBox?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowGeoBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:55
#, kde-format
msgid "Toggles display of the Geographic Location InfoBox."
msgstr ""
#. i18n: ectx: label, entry (StickyTimeBox), group (GUI)
#. i18n: ectx: label, entry (StickyFocusBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:59 kstars.kcfg:66
#, kde-format
msgid "Time InfoBox anchor flag"
msgstr ""
#. i18n: ectx: whatsthis, entry (StickyTimeBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:60
#, kde-format
msgid "Is the Time InfoBox anchored to a window edge? 0 = not anchored; 1 = anchored to right edge; 2 = anchored to bottom edge; 3 = anchored to bottom and right edges."
msgstr ""
#. i18n: ectx: whatsthis, entry (StickyFocusBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:67
#, kde-format
msgid "Is the Focus InfoBox anchored to a window edge? 0 = not anchored; 1 = anchored to right edge; 2 = anchored to bottom edge; 3 = anchored to bottom and right edges."
msgstr ""
#. i18n: ectx: label, entry (StickyGeoBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:73
#, kde-format
msgid "Geographic InfoBox anchor flag"
msgstr ""
#. i18n: ectx: whatsthis, entry (StickyGeoBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:74
#, kde-format
msgid "Is the Geographic Location InfoBox anchored to a window edge? 0 = not anchored; 1 = anchored to right edge; 2 = anchored to bottom edge; 3 = anchored to bottom and right edges."
msgstr ""
#. i18n: ectx: label, entry (ShowStatusBar), group (GUI)
#. +> trunk5
#: kstars.kcfg:80
#, kde-format
msgid "Display the statusbar?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowStatusBar), group (GUI)
#. +> trunk5
#: kstars.kcfg:81
#, kde-format
msgid "Toggle display of the status bar."
msgstr ""
#. i18n: ectx: label, entry (ShowAltAzField), group (GUI)
#. +> trunk5
#: kstars.kcfg:85
#, kde-format
msgid "Display Alt/Az coordinates in the statusbar?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowAltAzField), group (GUI)
#. +> trunk5
#: kstars.kcfg:86
#, kde-format
msgid "Toggle display of the Horizontal coordinates of the mouse cursor in the status bar."
msgstr ""
#. i18n: ectx: label, entry (ShowRADecField), group (GUI)
#. +> trunk5
#: kstars.kcfg:90
#, kde-format
msgid "Display RA/Dec coordinates in the statusbar?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowRADecField), group (GUI)
#. +> trunk5
#: kstars.kcfg:91
#, kde-format
msgid "Toggle display of the Equatorial coordinates of the mouse cursor at the current epoch in the status bar."
msgstr ""
#. i18n: ectx: label, entry (ShowJ2000RADecField), group (GUI)
#. +> trunk5
#: kstars.kcfg:95
#, kde-format
msgid "Display J2000.0 RA/Dec coordinates in the statusbar?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowJ2000RADecField), group (GUI)
#. +> trunk5
#: kstars.kcfg:96
#, kde-format
msgid "Toggle display of the Equatorial coordinates of the mouse cursor at the standard epoch in the status bar."
msgstr ""
#. i18n: ectx: label, entry (ShowSensorFOV), group (GUI)
#. +> trunk5
#: kstars.kcfg:100
#, kde-format
msgid "Display CCD sensor angular size on the sky map?"
msgstr ""
#. i18n: ectx: label, entry (WindowWidth), group (GUI)
#. +> trunk5
#: kstars.kcfg:104
#, kde-format
msgid "Width of main window, in pixels"
msgstr ""
#. i18n: ectx: label, entry (WindowHeight), group (GUI)
#. +> trunk5
#: kstars.kcfg:108
#, kde-format
msgid "Height of main window, in pixels"
msgstr ""
#. i18n: ectx: label, entry (RunStartupWizard), group (GUI)
#. +> trunk5
#: kstars.kcfg:112
#, kde-format
msgid "Run Startup Wizard when KStars launches?"
msgstr ""
#. i18n: ectx: label, entry (CurrentTheme), group (GUI)
#. +> trunk5
#: kstars.kcfg:116
#, kde-format
msgid "Current application theme"
msgstr ""
#. i18n: ectx: label, entry (CatalogFile), group (Catalogs)
#. +> trunk5
#: kstars.kcfg:123
#, kde-format
msgid "Filenames of defined custom object catalogs."
msgstr ""
#. i18n: ectx: whatsthis, entry (CatalogFile), group (Catalogs)
#. +> trunk5
#: kstars.kcfg:124
#, kde-format
msgid "List of the filenames of custom object catalogs."
msgstr ""
#. i18n: ectx: label, entry (ShowCatalog), group (Catalogs)
#. +> trunk5
#: kstars.kcfg:127
#, kde-format
msgid "List of toggles for displaying custom object catalogs."
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowCatalog), group (Catalogs)
#. +> trunk5
#: kstars.kcfg:128
#, kde-format
msgid "List of integers toggling display of each custom object catalog (any nonzero value indicates the objects in that catalog will be displayed)."
msgstr ""
#. i18n: ectx: label, entry (ShowCatalogNames), group (Catalogs)
#. +> trunk5
#: kstars.kcfg:131
#, kde-format
msgid "List for displaying custom object catalogs."
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowCatalogNames), group (Catalogs)
#. +> trunk5
#: kstars.kcfg:132
#, kde-format
msgid "List of names for which custom catalogs are to be displayed."
msgstr ""
#. i18n: ectx: label, entry (ResolveNamesOnline), group (Catalogs)
#. +> trunk5
#: kstars.kcfg:135
#, kde-format
msgid "Resolve names using online services."
msgstr ""
#. i18n: ectx: whatsthis, entry (ResolveNamesOnline), group (Catalogs)
#. +> trunk5
#: kstars.kcfg:136
#, kde-format
msgid "Names of objects entered into the find dialog are resolved using online services and stored in the database. This option also toggles the display of such resolved objects on the sky map."
msgstr ""
#. i18n: ectx: label, entry (INDIWindowWidth), group (indi)
#. +> trunk5
#: kstars.kcfg:143
#, kde-format
msgid "INDI window width"
msgstr ""
#. i18n: ectx: label, entry (INDIWindowHeight), group (indi)
#. +> trunk5
#: kstars.kcfg:147
#, kde-format
msgid "INDI window height"
msgstr ""
#. i18n: ectx: label, entry (useGeographicUpdate), group (indi)
#. i18n: ectx: label, entry (useTimeUpdate), group (indi)
#. +> trunk5
#: kstars.kcfg:155
#, kde-format
msgid "Automatically updates time and date?"
msgstr ""
#. i18n: ectx: label, entry (independentWindowINDI), group (indi)
#. +> trunk5
#: kstars.kcfg:159
#, kde-format
msgid "Make INDI Control Panel window independent of KStars main window"
msgstr ""
#. i18n: ectx: label, entry (showTargetCrosshair), group (indi)
#. +> trunk5
#: kstars.kcfg:163
#, kde-format
msgid "Draw crosshairs at telescope position in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (showTargetCrosshair), group (indi)
#. +> trunk5
#: kstars.kcfg:164
#, kde-format
msgid "Toggle display of crosshairs centered at telescope's pointed position in the KStars sky map."
msgstr ""
#. i18n: ectx: label, entry (showINDIMessages), group (indi)
#. +> trunk5
#: kstars.kcfg:168
#, kde-format
msgid "Display INDI messages in the statusbar?"
msgstr ""
#. i18n: ectx: whatsthis, entry (showINDIMessages), group (indi)
#. +> trunk5
#: kstars.kcfg:169
#, kde-format
msgid "Toggle display of INDI messages in the KStars statusbar."
msgstr ""
#. i18n: ectx: label, entry (SaveFocusImages), group (indi)
#. +> trunk5
#: kstars.kcfg:173
#, kde-format
msgid "Save autofocus images on disk?"
msgstr ""
#. i18n: ectx: label, entry (messageNotificationINDI), group (indi)
#. +> trunk5
#: kstars.kcfg:177
#, kde-format
msgid "INDI message notifications"
msgstr ""
#. i18n: ectx: whatsthis, entry (messageNotificationINDI), group (indi)
#. +> trunk5
#: kstars.kcfg:178
#, kde-format
msgid "Show INDI messages as desktop notifications instead of dialogs."
msgstr ""
#. i18n: ectx: label, entry (useKStarsSource), group (indi)
#. +> trunk5
#: kstars.kcfg:182
#, kde-format
msgid "Use KStars time and location for synchronization?"
msgstr ""
#. i18n: ectx: label, entry (useMountSource), group (indi)
#. +> trunk5
#: kstars.kcfg:186
#, kde-format
msgid "Use mount time and location for synchronization?"
msgstr ""
#. i18n: ectx: label, entry (useGPSSource), group (indi)
#. +> trunk5
#: kstars.kcfg:190
#, kde-format
msgid "Use GPS time and location for synchronization?"
msgstr ""
#. i18n: ectx: label, entry (fitsDir), group (indi)
#. +> trunk5
#: kstars.kcfg:194
#, kde-format
msgid "FITS Default directory"
msgstr ""
#. i18n: ectx: whatsthis, entry (fitsDir), group (indi)
#. +> trunk5
#: kstars.kcfg:195
#, kde-format
msgid "The default location of saved FITS files"
msgstr ""
#. i18n: ectx: label, entry (serverPortStart), group (indi)
#. +> trunk5
#: kstars.kcfg:199
#, kde-format
msgid "INDI Server Start Port"
msgstr ""
#. i18n: ectx: whatsthis, entry (serverPortStart), group (indi)
#. +> trunk5
#: kstars.kcfg:200
#, kde-format
msgid "INDI server will attempt to bind with ports starting from this port"
msgstr ""
#. i18n: ectx: label, entry (serverPortEnd), group (indi)
#. +> trunk5
#: kstars.kcfg:204
#, kde-format
msgid "INDI Server Final Port"
msgstr ""
#. i18n: ectx: whatsthis, entry (serverPortEnd), group (indi)
#. +> trunk5
#: kstars.kcfg:205
#, kde-format
msgid "INDI server will attempt to bind with ports ending with this port"
msgstr ""
#. i18n: ectx: label, entry (filterAlias), group (indi)
#. +> trunk5
#: kstars.kcfg:209
#, kde-format
msgid "Aliases for filter wheel slots."
msgstr ""
#. i18n: ectx: whatsthis, entry (filterAlias), group (indi)
#. +> trunk5
#: kstars.kcfg:210
#, kde-format
msgid "List of the aliases for filter wheel slots."
msgstr ""
#. i18n: ectx: label, entry (indiServer), group (indi)
#. i18n: ectx: whatsthis, entry (indiServer), group (indi)
#. +> trunk5
#: kstars.kcfg:213 kstars.kcfg:214
#, kde-format
msgid "PATH to indiserver binary"
msgstr ""
#. i18n: ectx: label, entry (indiServerIsInternal), group (indi)
#. +> trunk5
#: kstars.kcfg:218
#, kde-format
msgid "Internal or External INDI Server?"
msgstr ""
#. i18n: ectx: label, entry (indiDriversDir), group (indi)
#. i18n: ectx: whatsthis, entry (indiDriversDir), group (indi)
#. +> trunk5
#: kstars.kcfg:222 kstars.kcfg:223
#, kde-format
msgid "PATH to indi drivers directory"
msgstr ""
#. i18n: ectx: label, entry (indiDriversAreInternal), group (indi)
#. i18n: ectx: label, entry (AstrometrySolverIsInternal), group (Align)
#. +> trunk5
#: kstars.kcfg:227 kstars.kcfg:1988
#, kde-format
msgid "Internal or External Astrometry Solver?"
msgstr ""
#. i18n: ectx: label, entry (streamWindowWidth), group (indi)
#. +> trunk5
#: kstars.kcfg:231
#, kde-format
msgid "Video streaming window width"
msgstr ""
#. i18n: ectx: label, entry (streamWindowHeight), group (indi)
#. +> trunk5
#: kstars.kcfg:235
#, kde-format
msgid "Video streaming window height"
msgstr ""
#. i18n: ectx: label, entry (INDIMountLogging), group (indi)
#. +> trunk5
#: kstars.kcfg:239
#, kde-format
msgid "Enable INDI Mount logging"
msgstr ""
#. i18n: ectx: label, entry (INDIFocuserLogging), group (indi)
#. +> trunk5
#: kstars.kcfg:243
#, kde-format
msgid "Enable INDI Focuser logging"
msgstr ""
#. i18n: ectx: label, entry (INDICCDLogging), group (indi)
#. +> trunk5
#: kstars.kcfg:247
#, kde-format
msgid "Enable INDI CCD logging"
msgstr ""
#. i18n: ectx: label, entry (INDIFilterWheelLogging), group (indi)
#. +> trunk5
#: kstars.kcfg:251
#, kde-format
msgid "Enable INDI Filter Wheel logging"
msgstr ""
#. i18n: ectx: label, entry (INDIDomeLogging), group (indi)
#. +> trunk5
#: kstars.kcfg:255
#, kde-format
msgid "Enable INDI Dome logging"
msgstr ""
#. i18n: ectx: label, entry (INDIDetectorLogging), group (indi)
#. +> trunk5
#: kstars.kcfg:259
#, kde-format
msgid "Enable INDI Detector logging"
msgstr ""
#. i18n: ectx: label, entry (INDIWeatherLogging), group (indi)
#. +> trunk5
#: kstars.kcfg:263
#, kde-format
msgid "Enable INDI Weather logging"
msgstr ""
#. i18n: ectx: label, entry (INDIAuxiliaryLogging), group (indi)
#. +> trunk5
#: kstars.kcfg:267
#, kde-format
msgid "Enable INDI Auxiliary logging"
msgstr ""
#. i18n: ectx: label, entry (INDIRotatorLogging), group (indi)
#. +> trunk5
#: kstars.kcfg:271
#, kde-format
msgid "Enable INDI Rotator logging"
msgstr ""
#. i18n: ectx: label, entry (INDIGPSLogging), group (indi)
#. +> trunk5
#: kstars.kcfg:275
#, kde-format
msgid "Enable INDI GPS logging"
msgstr ""
#. i18n: ectx: label, entry (INDIAOLogging), group (indi)
#. +> trunk5
#: kstars.kcfg:279
#, kde-format
msgid "Enable INDI Adaptive Optics logging"
msgstr ""
#. i18n: ectx: label, entry (CityName), group (Location)
#. +> trunk5
#: kstars.kcfg:286
#, kde-format
msgid "City name of geographic location."
msgstr ""
#. i18n: ectx: whatsthis, entry (CityName), group (Location)
#. +> trunk5
#: kstars.kcfg:287
#, kde-format
msgid "The City name of the current geographic location."
msgstr ""
#. i18n: ectx: label, entry (ProvinceName), group (Location)
#. +> trunk5
#: kstars.kcfg:291
#, kde-format
msgid "Province name of geographic location."
msgstr ""
#. i18n: ectx: whatsthis, entry (ProvinceName), group (Location)
#. +> trunk5
#: kstars.kcfg:292
#, kde-format
msgid "The Province name of the current geographic location. This is the name of the state for locations in the U. S."
msgstr ""
#. i18n: ectx: label, entry (CountryName), group (Location)
#. +> trunk5
#: kstars.kcfg:296
#, kde-format
msgid "Country name of geographic location."
msgstr ""
#. i18n: ectx: whatsthis, entry (CountryName), group (Location)
#. +> trunk5
#: kstars.kcfg:297
#, kde-format
msgid "The Country name of the current geographic location."
msgstr ""
#. i18n: ectx: label, entry (Longitude), group (Location)
#. +> trunk5
#: kstars.kcfg:301
#, kde-format
msgid "Geographic Longitude, in degrees."
msgstr ""
#. i18n: ectx: whatsthis, entry (Longitude), group (Location)
#. +> trunk5
#: kstars.kcfg:302
#, kde-format
msgid "The longitude of the current geographic location, in decimal degrees."
msgstr ""
#. i18n: ectx: label, entry (Latitude), group (Location)
#. +> trunk5
#: kstars.kcfg:306
#, kde-format
msgid "Geographic Latitude, in degrees."
msgstr ""
#. i18n: ectx: whatsthis, entry (Latitude), group (Location)
#. +> trunk5
#: kstars.kcfg:307
#, kde-format
msgid "The latitude of the current geographic location, in decimal degrees."
msgstr ""
#. i18n: ectx: label, entry (Elevation), group (Location)
#. +> trunk5
#: kstars.kcfg:311
#, kde-format
msgid "Elevation above sea level of geographic location, in meters."
msgstr ""
#. i18n: ectx: label, entry (TimeZone), group (Location)
#. +> trunk5
#: kstars.kcfg:315
#, kde-format
msgid "Time Zone offset of geographic location, in hours."
msgstr ""
#. i18n: ectx: label, entry (DST), group (Location)
#. +> trunk5
#: kstars.kcfg:319
#, kde-format
msgid "Two-letter code for daylight savings time rule used by geographic location."
msgstr ""
#. i18n: ectx: whatsthis, entry (DST), group (Location)
#. +> trunk5
#: kstars.kcfg:320
#, kde-format
msgid "Two-letter code that determines the dates on which daylight savings time begins and ends (you can view the rules by pressing the \"Explain DST Rules\" button in the Geographic Location window)."
msgstr ""
#. i18n: ectx: label, entry (UseAnimatedSlewing), group (View)
#. +> trunk5
#: kstars.kcfg:327
#, kde-format
msgid "Use animated slewing effects when changing focus position?"
msgstr ""
#. i18n: ectx: whatsthis, entry (UseAnimatedSlewing), group (View)
#. +> trunk5
#: kstars.kcfg:328
#, kde-format
msgid "If true, focus changes will cause the sky to visibly spin to the new position. Otherwise, the display will \"snap\" instantly to the new position."
msgstr ""
#. i18n: ectx: label, entry (LeftClickSelectsObject), group (View)
#. +> trunk5
#: kstars.kcfg:332
#, kde-format
msgid "Select objects on left click?"
msgstr ""
#. i18n: ectx: whatsthis, entry (LeftClickSelectsObject), group (View)
#. +> trunk5
#: kstars.kcfg:333
#, kde-format
msgid "If true, clicking on the skymap will select the closest object and highlights it."
msgstr ""
#. i18n: ectx: label, entry (DefaultCursor), group (View)
#. +> trunk5
#: kstars.kcfg:337
#, kde-format
msgid "Select default Skymap cursor?"
msgstr ""
#. i18n: ectx: whatsthis, entry (DefaultCursor), group (View)
#. +> trunk5
#: kstars.kcfg:338
#, kde-format
msgid "Type of cursor when exploring the sky map."
msgstr ""
#. i18n: ectx: label, entry (FOVNames), group (View)
#. +> trunk5
#: kstars.kcfg:342
#, kde-format
msgid "Name of selected FOV indicators"
msgstr ""
#. i18n: ectx: whatsthis, entry (FOVNames), group (View)
#. +> trunk5
#: kstars.kcfg:343
#, kde-format
msgid "The names of the currently selected field-of-view indicators. The list of defined FOV indicator names is listed in the \"Settings|FOV Symbols\" menu."
msgstr ""
#. i18n: ectx: label, entry (FadePlanetTrails), group (View)
#. +> trunk5
#: kstars.kcfg:347
#, kde-format
msgid "Fade planet trails to background color?"
msgstr ""
#. i18n: ectx: whatsthis, entry (FadePlanetTrails), group (View)
#. +> trunk5
#: kstars.kcfg:348
#, kde-format
msgid "If true, trails attached to solar system bodies will fade into the background sky color."
msgstr ""
#. i18n: ectx: label, entry (FocusRA), group (View)
#. +> trunk5
#: kstars.kcfg:352
#, kde-format
msgid "Right Ascension of focus position"
msgstr ""
#. i18n: ectx: whatsthis, entry (FocusRA), group (View)
#. +> trunk5
#: kstars.kcfg:353
#, kde-format
msgid "The right ascension of the initial focus position of the sky map, in decimal hours. This value is volatile; it is reset whenever the program shuts down."
msgstr ""
#. i18n: ectx: label, entry (FocusDec), group (View)
#. +> trunk5
#: kstars.kcfg:357
#, kde-format
msgid "Declination of focus position"
msgstr ""
#. i18n: ectx: whatsthis, entry (FocusDec), group (View)
#. +> trunk5
#: kstars.kcfg:358
#, kde-format
msgid "The declination of the initial focus position of the sky map, in decimal degrees. This value is volatile; it is reset whenever the program shuts down."
msgstr ""
#. i18n: ectx: label, entry (FocusObject), group (View)
#. +> trunk5
#: kstars.kcfg:362
#, kde-format
msgid "Name of focused object"
msgstr ""
#. i18n: ectx: whatsthis, entry (FocusObject), group (View)
#. +> trunk5
#: kstars.kcfg:363
#, kde-format
msgid "The name of the object that should be centered and tracked on startup. If no object should be centered, set to \"nothing\". This value is volatile; it is reset whenever the program shuts down."
msgstr ""
#. i18n: ectx: label, entry (IsTracking), group (View)
#. +> trunk5
#: kstars.kcfg:367
#, kde-format
msgid "Is tracking engaged?"
msgstr ""
#. i18n: ectx: whatsthis, entry (IsTracking), group (View)
#. +> trunk5
#: kstars.kcfg:368
#, kde-format
msgid "True if the skymap should track on its initial position on startup. This value is volatile; it is reset whenever the program shuts down."
msgstr ""
#. i18n: ectx: label, entry (HideOnSlew), group (View)
#. +> trunk5
#: kstars.kcfg:372
#, kde-format
msgid "Hide objects while moving?"
msgstr ""
#. i18n: ectx: whatsthis, entry (HideOnSlew), group (View)
#. +> trunk5
#: kstars.kcfg:373
#, kde-format
msgid "Toggle whether KStars should hide some objects while the display is moving, for smoother motion."
msgstr ""
#. i18n: ectx: label, entry (HideCBounds), group (View)
#. +> trunk5
#: kstars.kcfg:377
#, kde-format
msgid "Hide constellation boundaries while moving?"
msgstr ""
#. i18n: ectx: whatsthis, entry (HideCBounds), group (View)
#. +> trunk5
#: kstars.kcfg:378
#, kde-format
msgid "Toggle whether constellation boundaries are hidden while the display is in motion."
msgstr ""
#. i18n: ectx: label, entry (HideCLines), group (View)
msgid "Draw grids according to active coordinate system?"
msgstr ""
#. i18n: ectx: whatsthis, entry (AutoSelectGrid), group (View)
#. +> trunk5
#: kstars.kcfg:537
#, kde-format
msgid "Coordinate grids will automatically change according to active coordinate system."
msgstr ""
#. i18n: ectx: label, entry (ShowEquatorialGrid), group (View)
#. +> trunk5
#: kstars.kcfg:541
#, kde-format
msgid "Draw equatorial coordinate grid in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowEquatorialGrid), group (View)
#. +> trunk5
#: kstars.kcfg:542
#, kde-format
msgid "Toggle whether the equatorial coordinate grid is drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowHorizontalGrid), group (View)
#. +> trunk5
#: kstars.kcfg:546
#, kde-format
msgid "Draw horizontal coordinate grid in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowHorizontalGrid), group (View)
#. +> trunk5
#: kstars.kcfg:547
#, kde-format
msgid "Toggle whether the horizontal coordinate grid is drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowLocalMeridian), group (View)
#. +> trunk5
#: kstars.kcfg:551
#, kde-format
msgid "Draw local meridian line in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowLocalMeridian), group (View)
#. +> trunk5
#: kstars.kcfg:552
#, kde-format
msgid "Toggle whether the local meridian line is drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowGround), group (View)
#. +> trunk5
#: kstars.kcfg:556
#, kde-format
msgid "Draw opaque ground in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowGround), group (View)
#. +> trunk5
#: kstars.kcfg:557
#, kde-format
msgid "Toggle whether the region below the horizon is opaque."
msgstr ""
#. i18n: ectx: label, entry (ShowHorizon), group (View)
#. +> trunk5
#: kstars.kcfg:561
#, kde-format
msgid "Draw horizon line in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowHorizon), group (View)
#. +> trunk5
#: kstars.kcfg:562
#, kde-format
msgid "Toggle whether the horizon line is drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowFlags), group (View)
#. +> trunk5
#: kstars.kcfg:566
#, kde-format
msgid "Draw flags in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowFlags), group (View)
#. +> trunk5
#: kstars.kcfg:567
#, kde-format
msgid "Toggle whether flags are drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowIC), group (View)
#. +> trunk5
#: kstars.kcfg:571
#, kde-format
msgid "Draw IC objects in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowIC), group (View)
#. +> trunk5
#: kstars.kcfg:572
#, kde-format
msgid "Toggle whether IC objects are drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowNGC), group (View)
#. +> trunk5
#: kstars.kcfg:576
#, kde-format
msgid "Draw NGC objects in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowNGC), group (View)
#. +> trunk5
#: kstars.kcfg:577
#, kde-format
msgid "Toggle whether NGC objects are drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowMessier), group (View)
#. +> trunk5
#: kstars.kcfg:581
#, kde-format
msgid "Draw Messier objects in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowMessier), group (View)
#. +> trunk5
#: kstars.kcfg:582
#, kde-format
msgid "Toggle whether Messier objects are drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowMessierImages), group (View)
#. +> trunk5
#: kstars.kcfg:586
#, kde-format
msgid "Draw Messier object images in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowMessierImages), group (View)
#. +> trunk5
#: kstars.kcfg:587
#, kde-format
msgid "Toggle whether Messier objects are rendered as images in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowOther), group (View)
#. +> trunk5
#: kstars.kcfg:591
#, kde-format
msgid "Draw extra deep-sky objects in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowOther), group (View)
#. +> trunk5
#: kstars.kcfg:592
#, kde-format
msgid "Toggle whether extra objects are drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowMilkyWay), group (View)
#. +> trunk5
#: kstars.kcfg:596
#, kde-format
msgid "Draw Milky Way contour in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowMilkyWay), group (View)
#. +> trunk5
#: kstars.kcfg:597
#, kde-format
msgid "Toggle whether the Milky Way contour is drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (FillMilkyWay), group (View)
#. +> trunk5
#: kstars.kcfg:601
#, kde-format
msgid "Fill Milky Way contour? (false means use outline only)"
msgstr ""
#. i18n: ectx: whatsthis, entry (FillMilkyWay), group (View)
#. +> trunk5
#: kstars.kcfg:602
#, kde-format
msgid "Toggle whether the Milky Way contour is filled. When this option is false, the Milky Way is shown as an outline."
msgstr ""
#. i18n: ectx: label, entry (ShowSolarSystem), group (View)
#. +> trunk5
#: kstars.kcfg:606
#, kde-format
msgid "Meta-option for all planets in the sky map."
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowSolarSystem), group (View)
#. +> trunk5
#: kstars.kcfg:607
#, kde-format
msgid "Meta-option to control whether all major planets (and the Sun and Moon) are drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowPlanetImages), group (View)
#. +> trunk5
#: kstars.kcfg:611
#, kde-format
msgid "Draw planets as images in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowPlanetImages), group (View)
#. +> trunk5
#: kstars.kcfg:612
#, kde-format
msgid "Toggle whether major planets (and the Sun and Moon) are rendered as images in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowPlanetNames), group (View)
#. +> trunk5
#: kstars.kcfg:616
#, kde-format
msgid "Label planet names in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowPlanetNames), group (View)
#. +> trunk5
#: kstars.kcfg:617
#, kde-format
msgid "Toggle whether major planets (and the Sun and Moon) are labeled in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowSun), group (View)
#. +> trunk5
#: kstars.kcfg:621
#, kde-format
msgid "Draw Sun in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowSun), group (View)
#. +> trunk5
#: kstars.kcfg:622
#, kde-format
msgid "Toggle whether the Sun is drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowMoon), group (View)
#. +> trunk5
#: kstars.kcfg:626
#, kde-format
msgid "Draw Moon in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowMoon), group (View)
#. +> trunk5
#: kstars.kcfg:627
#, kde-format
msgid "Toggle whether the Moon is drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowMercury), group (View)
#. +> trunk5
#: kstars.kcfg:631
#, kde-format
msgid "Draw Mercury in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowMercury), group (View)
#. +> trunk5
#: kstars.kcfg:632
#, kde-format
msgid "Toggle whether Mercury is drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowVenus), group (View)
#. +> trunk5
#: kstars.kcfg:636
#, kde-format
msgid "Draw Venus in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowVenus), group (View)
#. +> trunk5
#: kstars.kcfg:637
#, kde-format
msgid "Toggle whether Venus is drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowMars), group (View)
#. +> trunk5
#: kstars.kcfg:641
#, kde-format
msgid "Draw Mars in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowMars), group (View)
#. +> trunk5
#: kstars.kcfg:642
#, kde-format
msgid "Toggle whether Mars is drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowJupiter), group (View)
#. +> trunk5
#: kstars.kcfg:646
#, kde-format
msgid "Draw Jupiter in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowJupiter), group (View)
#. +> trunk5
#: kstars.kcfg:647
#, kde-format
msgid "Toggle whether Jupiter is drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowSaturn), group (View)
#. +> trunk5
#: kstars.kcfg:651
#, kde-format
msgid "Draw Saturn in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowSaturn), group (View)
#. +> trunk5
#: kstars.kcfg:652
#, kde-format
msgid "Toggle whether Saturn is drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowUranus), group (View)
#. +> trunk5
#: kstars.kcfg:656
#, kde-format
msgid "Draw Uranus in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowUranus), group (View)
#. +> trunk5
#: kstars.kcfg:657
#, kde-format
msgid "Toggle whether Uranus is drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowNeptune), group (View)
#. +> trunk5
#: kstars.kcfg:661
#, kde-format
msgid "Draw Neptune in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowNeptune), group (View)
#. +> trunk5
#: kstars.kcfg:662
#, kde-format
msgid "Toggle whether Neptune is drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowPluto), group (View)
#. +> trunk5
#: kstars.kcfg:666
#, kde-format
msgid "Draw Pluto in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowPluto), group (View)
#. +> trunk5
#: kstars.kcfg:667
#, kde-format
msgid "Toggle whether Pluto is drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowStars), group (View)
#. +> trunk5
#: kstars.kcfg:671
#, kde-format
msgid "Draw stars in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowStars), group (View)
#. +> trunk5
#: kstars.kcfg:672
#, kde-format
msgid "Toggle whether stars are drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowStarMagnitudes), group (View)
#. +> trunk5
#: kstars.kcfg:676
#, kde-format
msgid "Label star magnitudes in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowStarMagnitudes), group (View)
#. +> trunk5
#: kstars.kcfg:677
#, kde-format
msgid "Toggle whether star magnitude (brightness) labels are shown in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowStarNames), group (View)
#. +> trunk5
#: kstars.kcfg:681
#, kde-format
msgid "Label star names in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowStarNames), group (View)
#. +> trunk5
#: kstars.kcfg:682
#, kde-format
msgid "Toggle whether star name labels are shown in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowDeepSkyMagnitudes), group (View)
#. +> trunk5
#: kstars.kcfg:686
#, kde-format
msgid "Label deep-sky object magnitudes in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowDeepSkyMagnitudes), group (View)
#. +> trunk5
#: kstars.kcfg:687
#, kde-format
msgid "Toggle whether deep-sky object magnitude (brightness) labels are shown in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowDeepSkyNames), group (View)
#. +> trunk5
#: kstars.kcfg:691
#, kde-format
msgid "Label deep-sky objects in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowDeepSkyNames), group (View)
#. +> trunk5
#: kstars.kcfg:692
#, kde-format
msgid "Toggle whether deep-sky object name labels are shown in the sky map."
msgstr ""
#. i18n: ectx: label, entry (SlewTimeScale), group (View)
#. +> trunk5
#: kstars.kcfg:696
#, kde-format
msgid "Minimum timescale for forced-slewing mode"
msgstr ""
#. i18n: ectx: whatsthis, entry (SlewTimeScale), group (View)
#. +> trunk5
#: kstars.kcfg:697
#, kde-format
msgid "The timescale above which slewing mode is forced on at all times."
msgstr ""
#. i18n: ectx: label, entry (BoxBGMode), group (View)
#. +> trunk5
#: kstars.kcfg:701
#, kde-format
msgid "InfoBoxes Background fill mode"
msgstr ""
#. i18n: ectx: whatsthis, entry (BoxBGMode), group (View)
#. +> trunk5
#: kstars.kcfg:702
#, kde-format
msgid "The background fill mode for the on-screen information boxes: 0=\"no BG\"; 1=\"semi-transparent BG\"; 2=\"opaque BG\""
msgstr ""
#. i18n: ectx: label, entry (Projection), group (View)
#. +> trunk5
#: kstars.kcfg:706
#, kde-format
msgid "Mapping projection algorithm"
msgstr ""
#. i18n: ectx: whatsthis, entry (Projection), group (View)
#. +> trunk5
#: kstars.kcfg:707
#, kde-format
msgid "Algorithm for the mapping projection."
msgstr ""
#. i18n: ectx: label, entry (UseAbbrevConstellNames), group (View)
#. +> trunk5
#: kstars.kcfg:711
#, kde-format
msgid "Use abbreviated constellation names?"
msgstr ""
#. i18n: ectx: whatsthis, entry (UseAbbrevConstellNames), group (View)
#. +> trunk5
#: kstars.kcfg:712
#, kde-format
msgid "Use official IAU abbreviations for constellation names."
msgstr ""
#. i18n: ectx: label, entry (UseLatinConstellNames), group (View)
#. +> trunk5
#: kstars.kcfg:716
#, kde-format
msgid "Use Latin constellation names?"
msgstr ""
#. i18n: ectx: whatsthis, entry (UseLatinConstellNames), group (View)
#. +> trunk5
#: kstars.kcfg:717
#, kde-format
msgid "Use Latin constellation names."
msgstr ""
#. i18n: ectx: label, entry (UseLocalConstellNames), group (View)
#. +> trunk5
#: kstars.kcfg:721
#, kde-format
msgid "Use localized constellation names?"
msgstr ""
#. i18n: ectx: whatsthis, entry (UseLocalConstellNames), group (View)
#. +> trunk5
#: kstars.kcfg:722
#, kde-format
msgid "Use localized constellation names (if localized names are not available, default to Latin names)."
msgstr ""
#. i18n: ectx: label, entry (UseAltAz), group (View)
#. +> trunk5
#: kstars.kcfg:726
#, kde-format
msgid "Use horizontal coordinate system?"
msgstr ""
#. i18n: ectx: whatsthis, entry (UseAltAz), group (View)
#. +> trunk5
#: kstars.kcfg:727
#, kde-format
msgid "Display the sky with horizontal coordinates (when false, equatorial coordinates will be used)."
msgstr ""
#. i18n: ectx: label, entry (UseAutoLabel), group (View)
#. +> trunk5
#: kstars.kcfg:731
#, kde-format
msgid "Automatically label focused object?"
msgstr ""
#. i18n: ectx: whatsthis, entry (UseAutoLabel), group (View)
#. +> trunk5
#: kstars.kcfg:732
#, kde-format
msgid "Toggle whether a centered object automatically gets a name label attached."
msgstr ""
#. i18n: ectx: label, entry (UseAutoTrail), group (View)
#. +> trunk5
#: kstars.kcfg:736 tools/scriptbuilder.cpp:701
#, kde-format
msgid "Automatically add trail to centered solar system body?"
msgstr ""
#. i18n: ectx: whatsthis, entry (UseAutoTrail), group (View)
#. +> trunk5
#: kstars.kcfg:737
#, kde-format
msgid "Toggle whether a centered solar system object automatically gets a trail attached, as long as it remains centered."
msgstr ""
#. i18n: ectx: label, entry (UseHoverLabel), group (View)
#. +> trunk5
#: kstars.kcfg:741
#, kde-format
msgid "Add temporary label on mouse hover?"
msgstr ""
#. i18n: ectx: whatsthis, entry (UseHoverLabel), group (View)
#. +> trunk5
#: kstars.kcfg:742
#, kde-format
msgid "Toggle whether the object under the mouse cursor gets a transient name label."
msgstr ""
#. i18n: ectx: label, entry (UseRefraction), group (View)
#. +> trunk5
#: kstars.kcfg:746
#, kde-format
msgid "Correct positions for atmospheric refraction?"
msgstr ""
#. i18n: ectx: whatsthis, entry (UseRefraction), group (View)
#. +> trunk5
#: kstars.kcfg:747
#, kde-format
msgid "Toggle whether object positions are corrected for the effects of atmospheric refraction (only applies when horizontal coordinates are used)."
msgstr ""
#. i18n: ectx: label, entry (UseRelativistic), group (View)
#. +> trunk5
#: kstars.kcfg:751
#, kde-format
msgid "Apply relativistic corrections due to the bending of light in sun's gravitational field"
msgstr ""
#. i18n: ectx: whatsthis, entry (UseRelativistic), group (View)
#. +> trunk5
#: kstars.kcfg:752
#, kde-format
msgid "Toggle whether corrections due to bending of light around the sun are taken into account"
msgstr ""
#. i18n: ectx: label, entry (UseAntialias), group (View)
#. +> trunk5
#: kstars.kcfg:756
#, kde-format
msgid "Use antialiasing when drawing the screen?"
msgstr ""
#. i18n: ectx: whatsthis, entry (UseAntialias), group (View)
#. +> trunk5
#: kstars.kcfg:757
#, kde-format
msgid "Toggle whether the sky is rendered using antialiasing. Lines and shapes are smoother with antialiasing, but rendering the screen will take more time."
msgstr ""
#. i18n: ectx: label, entry (ZoomFactor), group (View)
#. +> trunk5
#: kstars.kcfg:761
#, kde-format
msgid "Zoom Factor, in pixels per radian"
msgstr ""
#. i18n: ectx: whatsthis, entry (ZoomFactor), group (View)
#. +> trunk5
#: kstars.kcfg:762
#, kde-format
msgid "The zoom level, measured in pixels per radian."
msgstr ""
#. i18n: ectx: label, entry (ZoomScrollFactor), group (View)
#. +> trunk5
#: kstars.kcfg:768
#, kde-format
msgid "Zoom scroll sensitivity."
msgstr ""
#. i18n: ectx: whatsthis, entry (ZoomScrollFactor), group (View)
#. +> trunk5
#: kstars.kcfg:769
#, kde-format
msgid "When zooming in or out, change zoom speed factor by this multiplier."
msgstr ""
#. i18n: ectx: label, entry (MagLimitAsteroid), group (View)
#. +> trunk5
#: kstars.kcfg:775
#, kde-format
msgid "Faint limit for asteroids"
msgstr ""
#. i18n: ectx: whatsthis, entry (MagLimitAsteroid), group (View)
#. +> trunk5
#: kstars.kcfg:776
#, kde-format
msgid "The faint magnitude limit for drawing asteroids."
msgstr ""
#. i18n: ectx: label, entry (MagLimitAsteroidDownload), group (View)
#. +> trunk5
#: kstars.kcfg:780
#, kde-format
msgid "Maximum magnitude for asteroids to be downloaded from JPL."
msgstr ""
#. i18n: ectx: whatsthis, entry (MagLimitAsteroidDownload), group (View)
#. +> trunk5
#: kstars.kcfg:781
#, kde-format
msgid "The maximum magnitude (visibility) to filter the asteroid data download from JPL."
msgstr ""
#. i18n: ectx: label, entry (AsteroidLabelDensity), group (View)
#. +> trunk5
#: kstars.kcfg:785
#, kde-format
msgid "Label density for asteroid names"
msgstr ""
#. i18n: ectx: whatsthis, entry (AsteroidLabelDensity), group (View)
#. +> trunk5
#: kstars.kcfg:786
#, kde-format
msgid "Controls the relative number of asteroid name labels drawn in the map."
msgstr ""
#. i18n: ectx: label, entry (MagLimitDrawDeepSky), group (View)
#. +> trunk5
#: kstars.kcfg:790
#, kde-format
msgid "Faint limit for deep-sky objects"
msgstr ""
#. i18n: ectx: whatsthis, entry (MagLimitDrawDeepSky), group (View)
#. +> trunk5
#: kstars.kcfg:791
#, kde-format
msgid "The faint magnitude limit for drawing deep-sky objects, when fully zoomed in."
msgstr ""
#. i18n: ectx: label, entry (MagLimitDrawDeepSkyZoomOut), group (View)
#. +> trunk5
#: kstars.kcfg:795
#, kde-format
msgid "Faint limit for deep-sky objects when zoomed out"
msgstr ""
#. i18n: ectx: whatsthis, entry (MagLimitDrawDeepSkyZoomOut), group (View)
#. +> trunk5
#: kstars.kcfg:796
#, kde-format
msgid "The faint magnitude limit for drawing deep-sky objects, when fully zoomed out."
msgstr ""
#. i18n: ectx: label, entry (ShowUnknownMagObjects), group (View)
#. +> trunk5
#: kstars.kcfg:800
#, kde-format
msgid "Show deep-sky objects of unknown magnitude"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowUnknownMagObjects), group (View)
#. +> trunk5
#: kstars.kcfg:801
#, kde-format
msgid "When enabled, objects whose magnitudes are unknown, or not available to KStars, are drawn irrespective of the faint limits set."
msgstr ""
#. i18n: ectx: label, entry (MagLimitDrawStar), group (View)
#. +> trunk5
#: kstars.kcfg:806
#, kde-format
msgid "Faint limit for stars"
msgstr ""
#. i18n: ectx: whatsthis, entry (MagLimitDrawStar), group (View)
#. +> trunk5
#: kstars.kcfg:807
#, kde-format
msgid "The faint magnitude limit for drawing stars, when fully zoomed in."
msgstr ""
#. i18n: ectx: label, entry (StarDensity), group (View)
#. +> trunk5
#: kstars.kcfg:811
#, kde-format
msgid "Density of stars in the field of view"
msgstr ""
#. i18n: ectx: whatsthis, entry (StarDensity), group (View)
#. +> trunk5
#: kstars.kcfg:812
#, kde-format
msgid "Sets the density of stars in the field of view"
msgstr ""
#. i18n: ectx: label, entry (MagLimitDrawStarZoomOut), group (View)
#. +> trunk5
#: kstars.kcfg:817
#, kde-format
msgid "Faint limit for stars when zoomed out"
msgstr ""
#. i18n: ectx: whatsthis, entry (MagLimitDrawStarZoomOut), group (View)
#. +> trunk5
#: kstars.kcfg:818
#, kde-format
msgid "The faint magnitude limit for drawing stars, when fully zoomed out."
msgstr ""
#. i18n: ectx: label, entry (MagLimitHideStar), group (View)
#. +> trunk5
#: kstars.kcfg:823
#, kde-format
msgid "Faint limit for stars when slewing"
msgstr ""
#. i18n: ectx: whatsthis, entry (MagLimitHideStar), group (View)
#. +> trunk5
#: kstars.kcfg:824
#, kde-format
msgid "The faint magnitude limit for drawing stars, when the map is in motion (only applicable if faint stars are set to be hidden while the map is in motion)."
msgstr ""
#. i18n: ectx: label, entry (StarLabelDensity), group (View)
#. +> trunk5
#: kstars.kcfg:828
#, kde-format
msgid "Relative density for star name labels and/or magnitudes"
msgstr ""
#. i18n: ectx: whatsthis, entry (StarLabelDensity), group (View)
#. +> trunk5
#: kstars.kcfg:829
#, kde-format
msgid "The relative density for drawing star name and magnitude labels."
msgstr ""
#. i18n: ectx: label, entry (DeepSkyLabelDensity), group (View)
#. +> trunk5
#: kstars.kcfg:833
#, kde-format
msgid "Relative density for deep-sky object name labels and/or magnitudes"
msgstr ""
#. i18n: ectx: whatsthis, entry (DeepSkyLabelDensity), group (View)
#. +> trunk5
#: kstars.kcfg:834
#, kde-format
msgid "The relative density for drawing deep-sky object name and magnitude labels."
msgstr ""
#. i18n: ectx: label, entry (DeepSkyLongLabels), group (View)
#. +> trunk5
#: kstars.kcfg:838
#, kde-format
msgid "Show long names in deep-sky object name labels?"
msgstr ""
#. i18n: ectx: whatsthis, entry (DeepSkyLongLabels), group (View)
#. +> trunk5
#: kstars.kcfg:839
#, kde-format
msgid "If true, long names (common names) for deep-sky objects are shown in the labels."
msgstr ""
#. i18n: ectx: label, entry (MaxRadCometName), group (View)
#. +> trunk5
#: kstars.kcfg:843
#, kde-format
msgid "Maximum distance from Sun for labeling comets, in AU"
msgstr ""
#. i18n: ectx: whatsthis, entry (MaxRadCometName), group (View)
#. +> trunk5
#: kstars.kcfg:844
#, kde-format
msgid "The maximum solar distance for drawing comets."
msgstr ""
#. i18n: ectx: label, entry (UseGL), group (View)
#. +> trunk5
#: kstars.kcfg:848
#, kde-format
msgid "Switch to OpenGL backend"
msgstr ""
#. i18n: ectx: whatsthis, entry (UseGL), group (View)
#. i18n: ectx: label, entry (RunClock), group (View)
#. +> trunk5
#: kstars.kcfg:853
#, kde-format
msgid "Run clock"
msgstr ""
#. i18n: ectx: whatsthis, entry (RunClock), group (View)
#. +> trunk5
#: kstars.kcfg:854
#, kde-format
msgid "The state of the clock (running or not)"
msgstr ""
#. i18n: ectx: label, entry (ObsListSymbol), group (ObservingList)
#. +> trunk5
#: kstars.kcfg:860
#, kde-format
msgid "Use symbols to label observing list objects"
msgstr ""
#. i18n: ectx: whatsthis, entry (ObsListSymbol), group (ObservingList)
#. +> trunk5
#: kstars.kcfg:861
#, kde-format
msgid "Objects in the observing list will be highlighted with a symbol in the map."
msgstr ""
#. i18n: ectx: label, entry (ObsListText), group (ObservingList)
#. +> trunk5
#: kstars.kcfg:865
#, kde-format
msgid "Use text to label observing list objects"
msgstr ""
#. i18n: ectx: whatsthis, entry (ObsListText), group (ObservingList)
#. +> trunk5
#: kstars.kcfg:866
#, kde-format
msgid "Objects in the observing list will be highlighted with a colored name label in the map."
msgstr ""
#. i18n: ectx: label, entry (ObsListPreferDSS), group (ObservingList)
#. +> trunk5
#: kstars.kcfg:870
#, kde-format
msgid "Prefer Digitized Sky Survey imagery in the observing list"
msgstr ""
#. i18n: ectx: whatsthis, entry (ObsListPreferDSS), group (ObservingList)
#. +> trunk5
#: kstars.kcfg:871
#, kde-format
msgid "The observing list will prefer DSS imagery while downloading imagery."
msgstr ""
#. i18n: ectx: label, entry (ObsListPreferSDSS), group (ObservingList)
#. +> trunk5
#: kstars.kcfg:875
#, kde-format
msgid "Prefer Sloan Digital Sky Survey imagery in the observing list"
msgstr ""
#. i18n: ectx: whatsthis, entry (ObsListPreferSDSS), group (ObservingList)
#. +> trunk5
#: kstars.kcfg:876
#, kde-format
msgid "The observing list will prefer SDSS imagery while downloading imagery."
msgstr ""
#. i18n: ectx: label, entry (ObsListDemoteHole), group (ObservingList)
#. +> trunk5
#: kstars.kcfg:880
#, kde-format
msgid "While sorting by percentage altitude in the observing list, demote objects present in the Dobsonian hole"
msgstr ""
#. i18n: ectx: whatsthis, entry (ObsListDemoteHole), group (ObservingList)
#. +> trunk5
#: kstars.kcfg:881
#, kde-format
msgid "Check this if you use a large Dobsonian telescope. Sorting by percentage current altitude is an easy way of determining what objects are well-placed for observation. However, when using a large Dobsonian telescope, objects close to the zenith are hard to observe. Since tracking there corresponds to a rotation in azimuth, it is both counterintuitive and requires the observer to frequently move the ladder. The region around the zenith where this is particularly frustrating is called the Dobsonian hole. This checkbox makes the observing list consider objects present in the hole as unfit for observation."
msgstr ""
#. i18n: ectx: label, entry (ObsListHoleSize), group (ObservingList)
#. +> trunk5
#: kstars.kcfg:885
#, kde-format
msgid "This is the angular distance from the zenith, in degrees, below which you can easily point your telescope."
msgstr ""
#. i18n: ectx: whatsthis, entry (ObsListHoleSize), group (ObservingList)
#. +> trunk5
#: kstars.kcfg:886
#, kde-format
msgid "This specifies the angular radius of the Dobsonian hole, i.e. the region where a large Dobsonian telescope cannot be pointed easily."
msgstr ""
#. i18n: ectx: label, entry (ObsListCoverage), group (ObservingList)
#. i18n: ectx: whatsthis, entry (XplanetLabel), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1125
#, kde-format
msgid "If true, display a label in the upper right corner."
msgstr ""
#. i18n: ectx: label, entry (XplanetLabelLocalTime), group (Xplanet)
#. i18n: ectx: label, entry (XplanetLabelGMT), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1129 kstars.kcfg:1134
#, kde-format
msgid "Show GMT label"
msgstr ""
#. i18n: ectx: whatsthis, entry (XplanetLabelLocalTime), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1130
#, kde-format
msgid "Show local time."
msgstr ""
#. i18n: ectx: whatsthis, entry (XplanetLabelGMT), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1135
#, kde-format
msgid "Show GMT instead of local time."
msgstr ""
#. i18n: ectx: label, entry (XplanetLabelString), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1139
#, kde-format
msgid "Planet string"
msgstr ""
#. i18n: ectx: whatsthis, entry (XplanetLabelString), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1140
#, kde-format, no-c-format
msgid "Specify the text of the first line of the label. By default, it says something like \"Looking at Earth\". Any instances of %t will be replaced by the target name, and any instances of %o will be replaced by the origin name."
msgstr ""
#. i18n: ectx: label, entry (XplanetFontSize), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1144
#, kde-format
msgid "Font Size"
msgstr ""
#. i18n: ectx: whatsthis, entry (XplanetFontSize), group (Xplanet)
#. i18n: ectx: label, entry (XplanetDateFormat), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1154
#, kde-format
msgid "Date format"
msgstr ""
#. i18n: ectx: whatsthis, entry (XplanetDateFormat), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1155
#, kde-format, no-c-format
msgid "Specify the format for the date/time label. This format string is passed to strftime(3). The default is \"%c %Z\", which shows the date, time, and time zone in the locale’s appropriate date and time representation."
msgstr ""
#. i18n: ectx: label, entry (XplanetLabelTL), group (Xplanet)
#. i18n: ectx: whatsthis, entry (XplanetLongitude), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1196
#, kde-format
msgid "Place the observer above the specified longitude (in degrees). Longitude is positive going east, negative going west (for the earth and moon), so for example Los Angeles is at -118 or 242. The default value is 0."
msgstr ""
#. i18n: ectx: label, entry (XplanetProjection), group (Xplanet)
#. i18n: ectx: whatsthis, entry (XplanetBackground), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1206
#, kde-format
msgid "Use a file as the background image, with the planet to be superimposed upon it. This option is only meaningful with the -projection option. A color may also be supplied."
msgstr ""
#. i18n: ectx: label, entry (XplanetBackgroundImage), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1210
#, kde-format
msgid "Use background image"
msgstr ""
#. i18n: ectx: whatsthis, entry (XplanetBackgroundImage), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1211
#, kde-format
msgid "Use a file as the background image."
msgstr ""
#. i18n: ectx: label, entry (XplanetBackgroundImagePath), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1215
#, kde-format
msgid "Background image path"
msgstr ""
#. i18n: ectx: whatsthis, entry (XplanetBackgroundImagePath), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1216
#, kde-format
msgid "The path of the background image."
msgstr ""
#. i18n: ectx: label, entry (XplanetBackgroundColor), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1220
#, kde-format
msgid "Use background color"
msgstr ""
#. i18n: ectx: whatsthis, entry (XplanetBackgroundColor), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1221
#, kde-format
msgid "Use a color as the background."
msgstr ""
#. i18n: ectx: label, entry (XplanetBackgroundColorValue), group (Xplanet)
msgid "A star of the specified magnitude will have a pixel brightness of 1. The default value is 10. Stars will be drawn more brightly if this number is larger."
msgstr ""
#. i18n: ectx: label, entry (XplanetArcFile), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1235
#, kde-format
msgid "Arc file"
msgstr ""
#. i18n: ectx: whatsthis, entry (XplanetArcFile), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1236
#, kde-format
msgid "If checked, use an arc file to be plotted against the background stars."
msgstr ""
#. i18n: ectx: label, entry (XplanetArcFilePath), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1240
#, kde-format
msgid "Path to arc file"
msgstr ""
#. i18n: ectx: whatsthis, entry (XplanetArcFilePath), group (Xplanet)
#. i18n: ectx: whatsthis, entry (AlwaysRecomputeCoordinates), group (General)
#. +> trunk5
#: kstars.kcfg:1324
#, kde-format
msgid "Checking this option causes recomputation of current equatorial coordinates from catalog coordinates (i.e. application of precession, nutation and aberration corrections) for every redraw of the map. This makes processing slower when there are many stars to handle, but is more likely to be bug free. There are known bugs in the rendering of stars when this recomputation is avoided."
msgstr ""
#. i18n: ectx: label, entry (DefaultDSSImageSize), group (General)
#. +> trunk5
#: kstars.kcfg:1328
#, kde-format
msgid "Default size for DSS images"
msgstr ""
#. i18n: ectx: whatsthis, entry (DefaultDSSImageSize), group (General)
#. +> trunk5
#: kstars.kcfg:1329
#, kde-format
msgid "The default size for DSS images downloaded from the Internet."
msgstr ""
#. i18n: ectx: label, entry (DSSPadding), group (General)
#. +> trunk5
#: kstars.kcfg:1333
#, kde-format
msgid "Additional padding around DSS Images of deep-sky objects"
msgstr ""
#. i18n: ectx: whatsthis, entry (DSSPadding), group (General)
#. +> trunk5
#: kstars.kcfg:1334
#, kde-format
msgid "To include parts of the star field, we add some extra padding around DSS images of deep-sky objects. This option configures the total (both sides) padding added to either dimension of the field."
msgstr ""
#. i18n: ectx: label, entry (VerboseLogging), group (General)
#. +> trunk5
#: kstars.kcfg:1338
#, kde-format
msgid "Enable Verbose Logging"
msgstr ""
#. i18n: ectx: whatsthis, entry (VerboseLogging), group (General)
#. +> trunk5
#: kstars.kcfg:1339
#, kde-format
msgid "Checking this option causes KStars to generate verbose debug information for diagnostic purposes. This may cause slowdown of KStars."
msgstr ""
#. i18n: ectx: label, entry (RegularLogging), group (General)
#. +> trunk5
#: kstars.kcfg:1343
#, kde-format
msgid "Enable Regular Logging"
msgstr ""
#. i18n: ectx: whatsthis, entry (RegularLogging), group (General)
#. +> trunk5
#: kstars.kcfg:1344
#, kde-format
msgid "Checking this option causes KStars to generate regular debug information."
msgstr ""
#. i18n: ectx: label, entry (DisableLogging), group (General)
#. +> trunk5
#: kstars.kcfg:1348
#, kde-format
msgid "Disable Verbose Logging"
msgstr ""
#. i18n: ectx: whatsthis, entry (DisableLogging), group (General)
#. +> trunk5
#: kstars.kcfg:1349
#, kde-format
msgid "Checking this option causes KStars to stop generating ANY debug information."
msgstr ""
#. i18n: ectx: label, entry (LogToDefault), group (General)
#. +> trunk5
#: kstars.kcfg:1353
#, kde-format
msgid "Log debug message to default output"
msgstr ""
#. i18n: ectx: whatsthis, entry (LogToDefault), group (General)
#. +> trunk5
#: kstars.kcfg:1354
#, kde-format
msgid "Checking this option causes KStars log debug messages to the default output used by the platform (e.g. Standard Error)."
msgstr ""
#. i18n: ectx: label, entry (LogToFile), group (General)
#. +> trunk5
#: kstars.kcfg:1358
#, kde-format
msgid "Log debug message to a log file"
msgstr ""
#. i18n: ectx: whatsthis, entry (LogToFile), group (General)
#. +> trunk5
#: kstars.kcfg:1359
#, kde-format
msgid "Checking this option causes KStars log debug messages to a log file as specified."
msgstr ""
#. i18n: ectx: whatsthis, entry (FITSLogging), group (General)
#. +> trunk5
#: kstars.kcfg:1363
#, kde-format
msgid "Log FITS Data activity."
msgstr ""
#. i18n: ectx: whatsthis, entry (INDILogging), group (General)
#. +> trunk5
#: kstars.kcfg:1367
#, kde-format
msgid "Log INDI devices activity."
msgstr ""
#. i18n: ectx: whatsthis, entry (CaptureLogging), group (General)
#. +> trunk5
#: kstars.kcfg:1371
#, kde-format
msgid "Log Ekos Capture Module activity."
msgstr ""
#. i18n: ectx: whatsthis, entry (FocusLogging), group (General)
#. +> trunk5
#: kstars.kcfg:1375
#, kde-format
msgid "Log Ekos Focus Module activity."
msgstr ""
#. i18n: ectx: whatsthis, entry (GuideLogging), group (General)
#. +> trunk5
#: kstars.kcfg:1379
#, kde-format
msgid "Log Ekos Guide Module activity."
msgstr ""
#. i18n: ectx: whatsthis, entry (AlignmentLogging), group (General)
#. +> trunk5
#: kstars.kcfg:1383
#, kde-format
msgid "Log Ekos Alignment Module activity."
msgstr ""
#. i18n: ectx: whatsthis, entry (MountLogging), group (General)
#. +> trunk5
#: kstars.kcfg:1387
#, kde-format
msgid "Log Ekos Mount Module activity."
msgstr ""
#. i18n: ectx: whatsthis, entry (ObservatoryLogging), group (General)
#. +> trunk5
#: kstars.kcfg:1391
#, kde-format
msgid "Log Ekos Observatory Module activity."
msgstr ""
#. i18n: ectx: label, entry (useFITSViewer), group (FITSViewer)
#. +> trunk5
#: kstars.kcfg:1397
#, kde-format
msgid "Display every image captured in a FITS Viewer window."
msgstr ""
#. i18n: ectx: label, entry (singlePreviewFITS), group (FITSViewer)
#. +> trunk5
#: kstars.kcfg:1401
#, kde-format
msgid "Preview FITS in a single tab?"
msgstr ""
#. i18n: ectx: label, entry (singleWindowCapturedFITS), group (FITSViewer)
#. +> trunk5
#: kstars.kcfg:1406
#, kde-format
msgid "Display all captured FITS in one window?"
msgstr ""
#. i18n: ectx: whatsthis, entry (singleWindowCapturedFITS), group (FITSViewer)
#. +> trunk5
#: kstars.kcfg:1407
#, kde-format
msgid "Display all captured FITS images in a single FITS Viewer window. By default each camera create its own FITS Viewer instance"
msgstr ""
#. i18n: ectx: label, entry (singleWindowOpenedFITS), group (FITSViewer)
#. +> trunk5
#: kstars.kcfg:1411
#, kde-format
msgid "Display all opened FITS in one window?"
msgstr ""
#. i18n: ectx: whatsthis, entry (singleWindowOpenedFITS), group (FITSViewer)
#. +> trunk5
#: kstars.kcfg:1412
#, kde-format
msgid "Display all opened FITS images in a single FITS Viewer window."
msgstr ""
#. i18n: ectx: whatsthis, entry (focusFITSOnNewImage), group (FITSViewer)
#. +> trunk5
#: kstars.kcfg:1416
#, kde-format
msgid "Bring the FITSViewer window to the foreground when receiving a new image."
msgstr ""
#. i18n: ectx: label, entry (independentWindowFITS), group (FITSViewer)
#. +> trunk5
#: kstars.kcfg:1420
#, kde-format
msgid "Make FITS Viewer window independent of KStars main window"
msgstr ""
#. i18n: ectx: label, entry (AutoDebayer), group (FITSViewer)
#. +> trunk5
#: kstars.kcfg:1424
#, kde-format
msgid "Automatically debayer a FITS image if it is contains a bayer pattern"
msgstr ""
#. i18n: ectx: label, entry (AutoImageToFITS), group (FITSViewer)
#. +> trunk5
#: kstars.kcfg:1428
#, kde-format
msgid "Convert received non-FITS images to FITS for display purposes."
msgstr ""
#. i18n: ectx: label, entry (Auto3DCube), group (FITSViewer)
#. +> trunk5
#: kstars.kcfg:1432
#, kde-format
msgid "Process 3D FITS Cube (RGB). If false, only first channel is processed."
msgstr ""
#. i18n: ectx: label, entry (AutoWCS), group (FITSViewer)
#. +> trunk5
#: kstars.kcfg:1436
#, kde-format
msgid "Automatically process World-Coordinate-System (WCS) data when loading a FITS file."
msgstr ""
#. i18n: ectx: label, entry (LimitedResourcesMode), group (FITSViewer)
#. +> trunk5
#: kstars.kcfg:1440
#, kde-format
msgid "Conserve CPU and memory by disabling all resource-intensive features in FITS Viewer"
msgstr ""
#. i18n: ectx: label, entry (BortleClass), group (WISettings)
#. +> trunk5
#: kstars.kcfg:1446
#, kde-format
msgid "Bortle dark-sky rating"
msgstr ""
#. i18n: ectx: label, entry (TelescopeCheck), group (WISettings)
#. +> trunk5
#: kstars.kcfg:1450
#, kde-format
msgid "Availability of telescope"
msgstr ""
#. i18n: ectx: label, entry (BinocularsCheck), group (WISettings)
#. +> trunk5
#: kstars.kcfg:1454
#, kde-format
msgid "Availability of binoculars"
msgstr ""
#. i18n: ectx: label, entry (BinocularsAperture), group (WISettings)
#. +> trunk5
#: kstars.kcfg:1458
#, kde-format
msgid "Aperture of available binocular"
msgstr ""
#. i18n: ectx: label, entry (ScopeListIndex), group (WISettings)
#. +> trunk5
#: kstars.kcfg:1462
#, kde-format
msgid "Index of selected scope from list of scopes"
msgstr ""
#. i18n: ectx: label, entry (EkosWindowWidth), group (Ekos)
#. +> trunk5
#: kstars.kcfg:1468
#, kde-format
msgid "Ekos window width"
msgstr ""
#. i18n: ectx: label, entry (EkosWindowHeight), group (Ekos)
#. +> trunk5
#: kstars.kcfg:1472
#, kde-format
msgid "Ekos window height"
msgstr ""
#. i18n: ectx: label, entry (EkosLeftIcons), group (Ekos)
#. +> trunk5
#: kstars.kcfg:1480
#, kde-format
msgid "Ekos modules icons are placed to the left of pages"
msgstr ""
#. i18n: ectx: label, entry (RememberCredentials), group (Ekos)
#. +> trunk5
#: kstars.kcfg:1484
#, kde-format
msgid "Remember Ekos Live credentials."
msgstr ""
#. i18n: ectx: label, entry (AutoStartEkosLive), group (Ekos)
#. +> trunk5
#: kstars.kcfg:1488
#, kde-format
msgid "Start Ekos Live on KStars startup."
msgstr ""
#. i18n: ectx: label, entry (EkosLiveOnline), group (Ekos)
#. +> trunk5
#: kstars.kcfg:1492
#, kde-format
msgid "Whether EkosLive connection mode is online."
msgstr ""
#. i18n: ectx: label, entry (EkosLiveUsername), group (Ekos)
#. +> trunk5
#: kstars.kcfg:1496
#, kde-format
msgid "EkosLive username"
msgstr ""
#. i18n: ectx: label, entry (independentWindowEkos), group (Ekos)
#. +> trunk5
#: kstars.kcfg:1499
#, kde-format
msgid "Make Ekos window independent of KStars main window"
msgstr ""
#. i18n: ectx: label, entry (profile), group (Ekos)
#. +> trunk5
#: kstars.kcfg:1503
#, kde-format
msgid "Ekos drivers profile"
msgstr ""
#. i18n: ectx: label, entry (neverLoadConfig), group (Ekos)
#. +> trunk5
#: kstars.kcfg:1507
#, kde-format
msgid "Never load device configuration?"
msgstr ""
#. i18n: ectx: label, entry (loadConfigOnConnection), group (Ekos)
#. +> trunk5
#: kstars.kcfg:1511
#, kde-format
msgid "Load device configuration upon successful connection?"
msgstr ""
#. i18n: ectx: label, entry (loadDefaultConfig), group (Ekos)
#. +> trunk5
#: kstars.kcfg:1515
#, kde-format
msgid "Always load device default configuration upon successful connection?"
msgstr ""
#. i18n: ectx: label, entry (autoLoadSerialAssistant), group (Ekos)
#. +> trunk5
#: kstars.kcfg:1519
#, kde-format
msgid "Automatically load Serial Port Assistant tool when detecting unmapped serial ports?"
msgstr ""
#. i18n: ectx: label, entry (shutterfulCCDs), group (DarkLibrary)
#. +> trunk5
#: kstars.kcfg:1529
#, kde-format
msgid "List of CCDs with mechanical or electronic shutters."
msgstr ""
#. i18n: ectx: label, entry (shutterlessCCDs), group (DarkLibrary)
#. +> trunk5
#: kstars.kcfg:1532
#, kde-format
msgid "List of CCDs without mechanical or electronic shutters."
msgstr ""
#. i18n: ectx: label, entry (MinimumAltLimit), group (Mount)
#. +> trunk5
#: kstars.kcfg:1537
#, kde-format
msgid "Default minimum mount altitude limit"
msgstr ""
#. i18n: ectx: label, entry (MaximumAltLimit), group (Mount)
#. +> trunk5
#: kstars.kcfg:1542
#, kde-format
msgid "Default maximum mount altitude limit."
msgstr ""
#. i18n: ectx: whatsthis, entry (MaximumAltLimit), group (Mount)
#. +> trunk5
#: kstars.kcfg:1543
#, kde-format
msgid "Maximum telescope altitude limit. If the telescope is above this limit, it will be commanded to stop."
msgstr ""
#. i18n: ectx: label, entry (EnableAltitudeLimits), group (Mount)
#. +> trunk5
#: kstars.kcfg:1547
#, kde-format
msgid "Enable mount altitude limits."
msgstr ""
#. i18n: ectx: label, entry (MeridianFlipOffset), group (Mount)
#. +> trunk5
#: kstars.kcfg:1551
#, kde-format
msgid "Default hour angle to perform meridian flip"
msgstr ""
#. i18n: ectx: whatsthis, entry (MeridianFlipOffset), group (Mount)
#. +> trunk5
#: kstars.kcfg:1552
#, kde-format
msgid "If the target hour angle exceeds this value, Ekos will command a meridian flip and if successful it will resume guiding and capture operations."
msgstr ""
#. i18n: ectx: label, entry (ExecuteMeridianFlip), group (Mount)
#. +> trunk5
#: kstars.kcfg:1555
#, kde-format
msgid "Flips the mount when reaching the meridian, if supported."
msgstr ""
#. i18n: ectx: label, entry (MeridianFlipUnitDegrees), group (Mount)
#. +> trunk5
#: kstars.kcfg:1559
#, kde-format
msgid "Sets the display unit for meridian flip to degrees."
msgstr ""
#. i18n: ectx: label, entry (LeftRightReversed), group (Mount)
#. +> trunk5
#: kstars.kcfg:1563
#, kde-format
msgid "Reverse the direction of right and left buttons in mount control."
msgstr ""
#. i18n: ectx: label, entry (UpDownReversed), group (Mount)
#. +> trunk5
#: kstars.kcfg:1567
#, kde-format
msgid "Reverse the direction of up and down buttons in mount control."
msgstr ""
#. i18n: ectx: label, entry (ParkEveryDay), group (Mount)
#. +> trunk5
#: kstars.kcfg:1571
#, kde-format
msgid "Automatically start parking timer on startup."
msgstr ""
#. i18n: ectx: label, entry (ParkTime), group (Mount)
#. +> trunk5
#: kstars.kcfg:1575
#, kde-format
msgid "Park mount at this time in 12 hour format."
msgstr ""
#. i18n: ectx: label, entry (DefaultCaptureCCD), group (Capture)
#. +> trunk5
#: kstars.kcfg:1581
#, kde-format
msgid "Default capture module CCD."
msgstr ""
#. i18n: ectx: label, entry (DefaultCaptureFilterWheel), group (Capture)
#. +> trunk5
#: kstars.kcfg:1584
#, kde-format
msgid "Default capture module filter wheel."
msgstr ""
#. i18n: ectx: label, entry (DefaultObserver), group (Capture)
#. +> trunk5
#: kstars.kcfg:1587
#, kde-format
msgid "Default observer full name."
msgstr ""
#. i18n: ectx: label, entry (SyncFOVPA), group (Capture)
#. +> trunk5
#: kstars.kcfg:1590
#, kde-format
msgid "Sync FOV indicator Position Angle with Rotator Settings Position Angle"
msgstr ""
#. i18n: ectx: label, entry (PAMultiplier), group (Capture)
#. +> trunk5
#: kstars.kcfg:1594
#, kde-format
msgid "Position angle multiplier"
msgstr ""
#. i18n: ectx: label, entry (PAOffset), group (Capture)
#. +> trunk5
#: kstars.kcfg:1598
#, kde-format
msgid "Position angle offset"
msgstr ""
#. i18n: ectx: label, entry (GuideDeviation), group (Capture)
#. +> trunk5
#: kstars.kcfg:1602
#, kde-format
msgid "Default maximum permittable guide deviation"
msgstr ""
#. i18n: ectx: whatsthis, entry (GuideDeviation), group (Capture)
#. +> trunk5
#: kstars.kcfg:1603
#, kde-format
msgid "If guide deviation exceeds this limit, the exposure will be automatically aborted and only resumed when the deviation is within this limit."
msgstr ""
#. i18n: ectx: label, entry (HFRDeviation), group (Capture)
#. +> trunk5
#: kstars.kcfg:1607
#, kde-format
msgid "Default maximum permittable HFR deviation"
msgstr ""
#. i18n: ectx: whatsthis, entry (HFRDeviation), group (Capture)
#. +> trunk5
#: kstars.kcfg:1608
#, kde-format
msgid "If HFR deviation exceeds this limit, the autofocus routine will be automatically started."
msgstr ""
#. i18n: ectx: label, entry (EnforceGuideDeviation), group (Capture)
#. +> trunk5
#: kstars.kcfg:1612
#, kde-format
msgid "Enforce guiding deviation limit."
msgstr ""
#. i18n: ectx: label, entry (EnforceAutofocus), group (Capture)
#. +> trunk5
#: kstars.kcfg:1616
#, kde-format
msgid "Enforce Autofocus HFR limit."
msgstr ""
#. i18n: ectx: label, entry (EnforceRefocusEveryN), group (Capture)
#. +> trunk5
#: kstars.kcfg:1620
#, kde-format
msgid "Enforce Refocus Every N Minutes."
msgstr ""
#. i18n: ectx: label, entry (RefocusEveryN), group (Capture)
#. +> trunk5
#: kstars.kcfg:1624
#, kde-format
msgid "Number of minute between forced refocus attempts"
msgstr ""
#. i18n: ectx: whatsthis, entry (RefocusEveryN), group (Capture)
#. +> trunk5
#: kstars.kcfg:1625
#, kde-format
msgid "Sets the time interval before forced autofocus attempts during a capture sequence."
msgstr ""
#. i18n: ectx: label, entry (ResetMountModelAfterMeridian), group (Capture)
#. +> trunk5
#: kstars.kcfg:1629
#, kde-format
msgid "Reset mount model after meridian flip."
msgstr ""
#. i18n: ectx: label, entry (CalibrationADUValue), group (Capture)
#. +> trunk5
#: kstars.kcfg:1633
#, kde-format
msgid "Desired flat field ADU"
msgstr ""
#. i18n: ectx: whatsthis, entry (CalibrationADUValue), group (Capture)
#. +> trunk5
#: kstars.kcfg:1634
#, kde-format
msgid "If set, Ekos will capture a few flat images to determine the optimal exposure time to achieve the desired ADU value."
msgstr ""
#. i18n: ectx: label, entry (CalibrationADUValueTolerance), group (Capture)
#. +> trunk5
#: kstars.kcfg:1638
#, kde-format
msgid "ADU Value tolerance"
msgstr ""
#. i18n: ectx: whatsthis, entry (CalibrationADUValueTolerance), group (Capture)
#. +> trunk5
#: kstars.kcfg:1639
#, kde-format
msgid "Maximum difference between measured and target ADU values to deem the value as acceptable."
msgstr ""
#. i18n: ectx: label, entry (CalibrationFlatSourceIndex), group (Capture)
#. +> trunk5
#: kstars.kcfg:1643
#, kde-format
msgid "Index of flat source option."
msgstr ""
#. i18n: ectx: label, entry (CalibrationFlatDurationIndex), group (Capture)
#. +> trunk5
#: kstars.kcfg:1647
#, kde-format
msgid "Index of flat duration option."
msgstr ""
#. i18n: ectx: label, entry (CalibrationWallAz), group (Capture)
#. +> trunk5
#: kstars.kcfg:1651
#, kde-format
msgid "Azimuth of calibration wall location."
msgstr ""
#. i18n: ectx: label, entry (CalibrationWallAlt), group (Capture)
#. +> trunk5
#: kstars.kcfg:1655
#, kde-format
msgid "Altitude of calibration wall location."
msgstr ""
#. i18n: ectx: label, entry (MaxTemperatureDiff), group (Capture)
#. +> trunk5
#: kstars.kcfg:1659
#, kde-format
msgid "Maximum acceptable difference between requested and measured temperature set point."
msgstr ""
#. i18n: ectx: label, entry (GuidingSettle), group (Capture)
#. +> trunk5
#: kstars.kcfg:1663
#, kde-format
msgid "Wait this many seconds after guiding is resumed before starting capture."
msgstr ""
#. i18n: ectx: label, entry (FlatSyncFocus), group (Capture)
#. +> trunk5
#: kstars.kcfg:1671
#, kde-format
msgid "Capture flat frames at the same focus position of light frames."
msgstr ""
#. i18n: ectx: label, entry (HFRThresholdPercentage), group (Capture)
#. +> trunk5
#: kstars.kcfg:1675
#, kde-format
msgid "Increase autofocus HFR value by this percentage gain and store it in Capture Module."
msgstr ""
#. i18n: ectx: label, entry (UseMedianFocus), group (Capture)
#. +> trunk5
#: kstars.kcfg:1679
#, kde-format
msgid "Calculate median focus value after each autofocus operation is complete."
msgstr ""
#. i18n: ectx: label, entry (SaveHFRToFile), group (Capture)
#. +> trunk5
#: kstars.kcfg:1683
#, kde-format
msgid "When saving a sequence file, save current HFR threshold value. By default, zero value is used."
msgstr ""
#. i18n: ectx: label, entry (AutoStretch), group (Capture)
#. +> trunk5
#: kstars.kcfg:1695
#, kde-format
msgid "Perform auto stretch on captured images in FITS Viewer."
msgstr ""
#. i18n: ectx: label, entry (useSummaryPreview), group (Capture)
#. +> trunk5
#: kstars.kcfg:1699
#, kde-format
msgid "Display every image captured sequence image in the Ekos summary screen preview window."
msgstr ""
#. i18n: ectx: label, entry (useDSLRImageViewer), group (Capture)
#. +> trunk5
#: kstars.kcfg:1703
#, kde-format
msgid "Display every captured DSLR image in the Image Viewer window."
msgstr ""
#. i18n: ectx: label, entry (ForceDSLRPresets), group (Capture)
#. +> trunk5
#: kstars.kcfg:1707
#, kde-format
msgid "Force exposure times to align with DSLR exposure presets. This insures accurate exposure times for sub-second exposures."
msgstr ""
#. i18n: ectx: label, entry (CaptureFormatIndex), group (Capture)
#. +> trunk5
#: kstars.kcfg:1711
#, kde-format
msgid "Index of desired capture format (FITS or Native)."
msgstr ""
#. i18n: ectx: label, entry (CaptureDirectory), group (Capture)
#. +> trunk5
#: kstars.kcfg:1715
#, kde-format
msgid "Path to capture directory to save images."
msgstr ""
#. i18n: ectx: label, entry (RemoteCaptureDirectory), group (Capture)
#. +> trunk5
#: kstars.kcfg:1719
#, kde-format
msgid "Path to remote capture directory to save images."
msgstr ""
#. i18n: ectx: label, entry (ManualCoverTimeout), group (Capture)
#. +> trunk5
#: kstars.kcfg:1722
#, kde-format
msgid "Cover or uncover telescope dialog timeout in seconds."
msgstr ""
#. i18n: ectx: label, entry (fileSettingsUseFilter), group (Capture)
#. +> trunk5
#: kstars.kcfg:1726
#, kde-format
msgid "Add the filter name to the capture file name."
msgstr ""
#. i18n: ectx: label, entry (fileSettingsUseDuration), group (Capture)
#. +> trunk5
#: kstars.kcfg:1730
#, kde-format
msgid "Add the capture duration to the capture file name."
msgstr ""
#. i18n: ectx: label, entry (fileSettingsUseTimestamp), group (Capture)
#. +> trunk5
#: kstars.kcfg:1734
#, kde-format
msgid "Add the capture timestamp to the capture file name."
msgstr ""
#. i18n: ectx: label, entry (DefaultFocusCCD), group (Focus)
#. +> trunk5
#: kstars.kcfg:1740
#, kde-format
msgid "Default focus module CCD."
msgstr ""
#. i18n: ectx: label, entry (DefaultFocusFocuser), group (Focus)
#. +> trunk5
#: kstars.kcfg:1743
#, kde-format
msgid "Default focus module focuser."
msgstr ""
#. i18n: ectx: label, entry (DefaultFocusFilterWheel), group (Focus)
#. +> trunk5
#: kstars.kcfg:1746
#, kde-format
msgid "Default focus module filter wheel."
msgstr ""
#. i18n: ectx: label, entry (FocusTicks), group (Focus)
#. +> trunk5
#: kstars.kcfg:1749
#, kde-format
msgid "Default Focuser step ticks"
msgstr ""
#. i18n: ectx: whatsthis, entry (FocusTicks), group (Focus)
#. +> trunk5
#: kstars.kcfg:1750
#, kde-format
msgid "Step size of the absolute focuser. The step size TICKS should be adjusted so that when the focuser moves TICKS steps, the difference in HFR is more than 0.1 pixels. Lower the value when you are close to optimal focus."
msgstr ""
#. i18n: ectx: whatsthis, entry (FocusSettleTime), group (Focus)
#. +> trunk5
#: kstars.kcfg:1754
#, kde-format
msgid "Wait for this many seconds after moving the focuser before capturing the next image during AutoFocus."
msgstr ""
#. i18n: ectx: whatsthis, entry (GuideSettleTime), group (Focus)
#. +> trunk5
#: kstars.kcfg:1758
#, kde-format
msgid "Wait for this many seconds after resuming guide."
msgstr ""
#. i18n: ectx: label, entry (FocusTolerance), group (Focus)
#. +> trunk5
#: kstars.kcfg:1762
#, kde-format
msgid "Default Focuser tolerance value"
msgstr ""
#. i18n: ectx: whatsthis, entry (FocusTolerance), group (Focus)
#. +> trunk5
#: kstars.kcfg:1763
#, kde-format
msgid "The tolerance specifies the percentage difference between the current focusing position and the minimum obtained during the focusing run. Adjustment of this value is necessary to prevent the focusing algorithm from oscillating back and forth."
msgstr ""
#. i18n: ectx: label, entry (FocusMaxTravel), group (Focus)
#. +> trunk5
#: kstars.kcfg:1767
#, kde-format
msgid "Maximum Focus Travel Distance"
msgstr ""
#. i18n: ectx: whatsthis, entry (FocusMaxTravel), group (Focus)
#. +> trunk5
#: kstars.kcfg:1768
#, kde-format
msgid "Set the maximum travel distance of an absolute focuser."
msgstr ""
#. i18n: ectx: label, entry (FocusGain), group (Focus)
#. +> trunk5
#: kstars.kcfg:1772
#, kde-format
msgid "Default Focuser gain value"
msgstr ""
#. i18n: ectx: whatsthis, entry (FocusGain), group (Focus)
#. +> trunk5
#: kstars.kcfg:1773
#, kde-format
msgid "Specifies gain value of CCD when performing focusing if supported by camera."
msgstr ""
#. i18n: ectx: label, entry (FocusBoxSize), group (Focus)
#. +> trunk5
#: kstars.kcfg:1777
#, kde-format
msgid "Default Focuser star selection box size"
msgstr ""
#. i18n: ectx: whatsthis, entry (FocusBoxSize), group (Focus)
#. +> trunk5
#: kstars.kcfg:1778
#, kde-format
msgid "Set box size to select a focus star."
msgstr ""
#. i18n: ectx: label, entry (FocusXBin), group (Focus)
#. +> trunk5
#: kstars.kcfg:1782
#, kde-format
msgid "Default CCD X binning in focus mode"
msgstr ""
#. i18n: ectx: whatsthis, entry (FocusXBin), group (Focus)
#. +> trunk5
#: kstars.kcfg:1783
#, kde-format
msgid "Set horizontal binning of CCD camera while in focus mode."
msgstr ""
#. i18n: ectx: label, entry (FocusYBin), group (Focus)
#. +> trunk5
#: kstars.kcfg:1787
#, kde-format
msgid "Default CCD Y binning in focus mode"
msgstr ""
#. i18n: ectx: whatsthis, entry (FocusYBin), group (Focus)
#. +> trunk5
#: kstars.kcfg:1788
#, kde-format
msgid "Set vertical binning of CCD camera while in focus mode."
msgstr ""
#. i18n: ectx: label, entry (FocusSubFrame), group (Focus)
#. +> trunk5
#: kstars.kcfg:1792
#, kde-format
msgid "Subframe the focus star during the autofocus procedure."
msgstr ""
#. i18n: ectx: label, entry (FocusUseFullField), group (Focus)
#. +> trunk5
#: kstars.kcfg:1796
#, kde-format
msgid "Measure average HFR from all stars combined in a full frame. This method defaults to the Centroid detection, but can use SEP detection too. Its performance decreases as the number of stars increases."
msgstr ""
#. i18n: ectx: label, entry (FocusFullFieldInnerRadius), group (Focus)
#. +> trunk5
#: kstars.kcfg:1800
#, kde-format
msgid "Full field inner radius."
msgstr ""
#. i18n: ectx: whatsthis, entry (FocusFullFieldInnerRadius), group (Focus)
#. +> trunk5
#: kstars.kcfg:1801
#, kde-format, no-c-format
msgid "During full field focusing, stars which are inside this percentage of the frame are filtered out of HFR calculation (default 0%). Detection algorithms may also have an inherent filter."
msgstr ""
#. i18n: ectx: label, entry (FocusFullFieldOuterRadius), group (Focus)
#. +> trunk5
#: kstars.kcfg:1805
#, kde-format
msgid "Full field outer radius."
msgstr ""
#. i18n: ectx: whatsthis, entry (FocusFullFieldOuterRadius), group (Focus)
#. +> trunk5
#: kstars.kcfg:1806
#, kde-format, no-c-format
msgid "During full field focusing, stars which are outside this percentage of the frame are filtered out of HFR calculation (default 100%). Detection algorithms may also have an inherent filter."
msgstr ""
#. i18n: ectx: label, entry (FocusAutoStarEnabled), group (Focus)
#. +> trunk5
#: kstars.kcfg:1810
#, kde-format
msgid "Automatically select a star to focus."
msgstr ""
#. i18n: ectx: label, entry (SuspendGuiding), group (Focus)
#. +> trunk5
#: kstars.kcfg:1814
#, kde-format
msgid "Suspend guiding while autofocus in progress."
msgstr ""
#. i18n: ectx: label, entry (UseFocusDarkFrame), group (Focus)
#. +> trunk5
#: kstars.kcfg:1818
#, kde-format
msgid "Take a dark frame and subtract it before running autofocus operation."
msgstr ""
#. i18n: ectx: label, entry (FocusEffect), group (Focus)
#. +> trunk5
#: kstars.kcfg:1822
#, kde-format
msgid "Image filter to be applied to focus image upon loading."
msgstr ""
#. i18n: ectx: label, entry (FocusThreshold), group (Focus)
#. +> trunk5
#: kstars.kcfg:1826
#, kde-format
msgid "Relative percentage strength of centroid edge pixel strength to average pixel value."
msgstr ""
#. i18n: ectx: label, entry (FocusDetection), group (Focus)
#. +> trunk5
#: kstars.kcfg:1830
#, kde-format
msgid "Star detection algorithm"
msgstr ""
#. i18n: ectx: label, entry (FocusAlgorithm), group (Focus)
#. +> trunk5
#: kstars.kcfg:1834
#, kde-format
msgid "Focus process algorithm"
msgstr ""
#. i18n: ectx: label, entry (FocusFramesCount), group (Focus)
#. +> trunk5
#: kstars.kcfg:1838
#, kde-format
msgid "Number of focus frames to average for HFR calculations."
msgstr ""
#. i18n: ectx: label, entry (FocusMaxSingleStep), group (Focus)
#. +> trunk5
#: kstars.kcfg:1842
#, kde-format
msgid "Maximum single step the focus algorithm is permitted to command."
msgstr ""
#. i18n: ectx: label, entry (DefaultAlignCCD), group (Align)
#. +> trunk5
#: kstars.kcfg:1848
#, kde-format
msgid "Default align module CCD."
msgstr ""
#. i18n: ectx: label, entry (DefaultAlignFilterWheel), group (Align)
#. +> trunk5
#: kstars.kcfg:1851
#, kde-format
msgid "Default align module Filter Wheel."
msgstr ""
#. i18n: ectx: label, entry (AlignExposure), group (Align)
#. +> trunk5
#: kstars.kcfg:1854
#, kde-format
msgid "Default alignment exposure value"
msgstr ""
#. i18n: ectx: whatsthis, entry (AlignExposure), group (Align)
#. +> trunk5
#: kstars.kcfg:1855
#, kde-format
msgid "Specifies exposure value of CCD in seconds when performing plate solving."
msgstr ""
#. i18n: ectx: label, entry (SolverBinningIndex), group (Align)
#. +> trunk5
#: kstars.kcfg:1859
#, kde-format
msgid "Default CCD binning index while in alignment mode"
msgstr ""
#. i18n: ectx: whatsthis, entry (SolverBinningIndex), group (Align)
#. +> trunk5
#: kstars.kcfg:1860
#, kde-format
msgid "Set binning index of CCD camera while in alignment mode. Default values 0-3 corresponding to 1x1 to 4x4 binning. 4 is max binning."
msgstr ""
#. i18n: ectx: whatsthis, entry (AstrometryUseRotator), group (Align)
#. +> trunk5
#: kstars.kcfg:1864
#, kde-format
msgid "Use rotator when performing load and slew."
msgstr ""
#. i18n: ectx: whatsthis, entry (AstrometryRotatorThreshold), group (Align)
#. +> trunk5
#: kstars.kcfg:1868
#, kde-format
msgid "Threshold between measured and FITS position angles in arcminutes to consider the load and slew operation successful."
msgstr ""
#. i18n: ectx: whatsthis, entry (SolverBackend), group (Align)
#. i18n: ectx: label, entry (AstrometrySolverType), group (Align)
#. +> trunk5
#: kstars.kcfg:1876
#, kde-format
msgid "Set astrometry.net solver type (online, offline, remote)."
msgstr ""
#. i18n: ectx: label, entry (SolverScopeType), group (Align)
#. +> trunk5
#: kstars.kcfg:1880
#, kde-format
msgid "Index of telescope type to be used when solving an image. 0 for Primary, 1 for Guide"
msgstr ""
#. i18n: ectx: label, entry (SolverGotoOption), group (Align)
#. +> trunk5
#: kstars.kcfg:1884
#, kde-format
msgid "Action to take if solver if successful (Sync, Slew to Target, or None)"
msgstr ""
#. i18n: ectx: label, entry (AstrometrySolverWCS), group (Align)
#. +> trunk5
#: kstars.kcfg:1888
#, kde-format
msgid "World Coordinate System (WCS). WCS is used to encode RA/DEC coordinates in captured CCD images."
msgstr ""
#. i18n: ectx: label, entry (AstrometrySolverOverlay), group (Align)
#. +> trunk5
#: kstars.kcfg:1892
#, kde-format
msgid "Display received FITS images unto solver FOV rectangle in the sky map."
msgstr ""
#. i18n: ectx: label, entry (AstrometryDifferentialSlewing), group (Align)
#. +> trunk5
#: kstars.kcfg:1896
#, kde-format
msgid "Do not use Sync when Slew to Target is selected. Use differential slewing to correct for discrepancies."
msgstr ""
#. i18n: ectx: label, entry (SolverAccuracyThreshold), group (Align)
#. +> trunk5
#: kstars.kcfg:1900
#, kde-format
msgid "Accuracy threshold in arcseconds between solution and target coordinates."
msgstr ""
#. i18n: ectx: label, entry (LockAlignFilterIndex), group (Align)
#. +> trunk5
#: kstars.kcfg:1904
#, kde-format
msgid "Use specified filter index when performing astrometry regardless of current filter settings."
msgstr ""
#. i18n: ectx: label, entry (AlignDarkFrame), group (Align)
#. +> trunk5
#: kstars.kcfg:1908
#, kde-format
msgid "Take a dark frame and subtract it before running astrometry operation."
msgstr ""
#. i18n: ectx: label, entry (SettlingTime), group (Align)
#. +> trunk5
#: kstars.kcfg:1912
#, kde-format
msgid "Time to wait in milliseconds after telescope slewing is complete before starting the next capture."
msgstr ""
#. i18n: ectx: label, entry (AstrometryUseNoFITS2FITS), group (Align)
#. +> trunk5
#: kstars.kcfg:1916
#, kde-format
msgid "Do not sanitize FITS. This option should only be checked if astrometry.net version is 0.67 or earlier. Uncheck for any versions greater than 0.67."
msgstr ""
#. i18n: ectx: label, entry (AstrometryImageScaleLow), group (Align)
#. +> trunk5
#: kstars.kcfg:1932
#, kde-format
msgid "Lower image scale."
msgstr ""
#. i18n: ectx: label, entry (AstrometryImageScaleHigh), group (Align)
#. +> trunk5
#: kstars.kcfg:1935
#, kde-format
msgid "Upper image scale."
msgstr ""
#. i18n: ectx: label, entry (AstrometryAutoUpdateImageScale), group (Align)
#. +> trunk5
#: kstars.kcfg:1938
#, kde-format
msgid "Automatically update image scale when CCD or Mount parameters are updated."
msgstr ""
#. i18n: ectx: label, entry (AstrometryImageScaleUnits), group (Align)
#. +> trunk5
#: kstars.kcfg:1942
#, kde-format
msgid "Image scale units in arcminutes (aw), degrees (dw), or arcsec per pixel (app)"
msgstr ""
#. i18n: ectx: label, entry (AstrometryDownsample), group (Align)
#. +> trunk5
#: kstars.kcfg:1950
#, kde-format
msgid "Downsample factor"
msgstr ""
#. i18n: ectx: label, entry (AstrometryAutoDownsample), group (Align)
#. +> trunk5
#: kstars.kcfg:1954
#, kde-format
msgid "Automatically downsample based on image size."
msgstr ""
#. i18n: ectx: label, entry (AstrometryPositionRA), group (Align)
#. +> trunk5
#: kstars.kcfg:1962
#, kde-format
msgid "User supplied Right Ascension value in degrees to be passed to the solver."
msgstr ""
#. i18n: ectx: label, entry (AstrometryPositionDE), group (Align)
#. +> trunk5
#: kstars.kcfg:1965
#, kde-format
msgid "User supplied declination value in degrees to be passed to the solver."
msgstr ""
#. i18n: ectx: label, entry (AstrometryAutoUpdatePosition), group (Align)
#. +> trunk5
#: kstars.kcfg:1968
#, kde-format
msgid "Automatically update position coordinates when mounts completes slewing."
msgstr ""
#. i18n: ectx: label, entry (AstrometryCustomOptions), group (Align)
#. i18n: ectx: label, entry (AstrometrySolverBinary), group (Align)
#. +> trunk5
#: kstars.kcfg:1983
#, kde-format
msgid "astrometry.net solve-field binary"
msgstr ""
#. i18n: ectx: whatsthis, entry (AstrometrySolverBinary), group (Align)
#. +> trunk5
#: kstars.kcfg:1984
#, kde-format
msgid "Path to astrometry.net solver location."
msgstr ""
#. i18n: ectx: label, entry (AstrometryWCSInfo), group (Align)
#. +> trunk5
#: kstars.kcfg:1992
#, kde-format
msgid "astrometry.net wcsinfo binary"
msgstr ""
#. i18n: ectx: whatsthis, entry (AstrometryWCSInfo), group (Align)
#. +> trunk5
#: kstars.kcfg:1993
#, kde-format
msgid "Path to astrometry.net wcsinfo location."
msgstr ""
#. i18n: ectx: label, entry (AstrometryConfFile), group (Align)
#. +> trunk5
#: kstars.kcfg:2001
#, kde-format
msgid "astrometry.net configuration file"
msgstr ""
#. i18n: ectx: whatsthis, entry (AstrometryConfFile), group (Align)
#. +> trunk5
#: kstars.kcfg:2002
#, kde-format
msgid "Path to astrometry.net file location."
msgstr ""
#. i18n: ectx: label, entry (AstrometryConfFileIsInternal), group (Align)
#. +> trunk5
#: kstars.kcfg:2006
#, kde-format
msgid "Internal or External Astrometry.net Conf File?"
msgstr ""
#. i18n: ectx: label, entry (UseDefaultPython), group (Align)
#. +> trunk5
#: kstars.kcfg:2010
#, kde-format
msgid "Use the Default System Python Path"
msgstr ""
#. i18n: ectx: whatsthis, entry (PythonExecPath), group (Align)
#. +> trunk5
#: kstars.kcfg:2015
#, kde-format
msgid "Folder in which the desired python executable or link to be used for astrometry.net resides."
msgstr ""
#. i18n: ectx: label, entry (UseSextractor), group (Align)
#. +> trunk5
#: kstars.kcfg:2020
#, kde-format
msgid "Use Sextractor to extract an xylist for plate solving with astrometry.net instead of python"
msgstr ""
#. i18n: ectx: whatsthis, entry (SextractorBinary), group (Align)
#. +> trunk5
#: kstars.kcfg:2029
#, kde-format
msgid "Path to the Sextractor executable."
msgstr ""
#. i18n: ectx: label, entry (AstrometryAPIKey), group (Align)
#. +> trunk5
#: kstars.kcfg:2034
#, kde-format
msgid "astrometry.net API Key"
msgstr ""
#. i18n: ectx: whatsthis, entry (AstrometryAPIKey), group (Align)
#. +> trunk5
#: kstars.kcfg:2035
#, kde-format
msgid "Key to access astrometry.net online web services. You must register with astrometry.net to obtain a key."
msgstr ""
#. i18n: ectx: label, entry (AstrometryAPIURL), group (Align)
#. +> trunk5
#: kstars.kcfg:2039
#, kde-format
msgid "astrometry.net API URL"
msgstr ""
#. i18n: ectx: label, entry (AstrometryUseJPEG), group (Align)
#. +> trunk5
#: kstars.kcfg:2043
#, kde-format
msgid "Use JPEG format, instead of FITS, to upload images to the astrometry.net online service."
msgstr ""
#. i18n: ectx: label, entry (AstrometryTimeout), group (Align)
#. +> trunk5
#: kstars.kcfg:2047
#, kde-format
msgid "Timeout in seconds to wait for astrometry solver to complete."
msgstr ""
#. i18n: ectx: label, entry (PAHMountSpeedIndex), group (Align)
#. +> trunk5
#: kstars.kcfg:2051
#, kde-format
msgid "Speed index to set mount in Polar Alignment Assistant Tool."
msgstr ""
#. i18n: ectx: label, entry (PAHAutoPark), group (Align)
#. +> trunk5
#: kstars.kcfg:2055
#, kde-format
msgid "Automatically park the mount after Polar Alignment Assistant Tool is complete."
msgstr ""
#. i18n: ectx: label, entry (DefaultGuideCCD), group (Guide)
#. +> trunk5
#: kstars.kcfg:2061
#, kde-format
msgid "Default guide module CCD."
msgstr ""
#. i18n: ectx: label, entry (DefaultST4Driver), group (Guide)
#. +> trunk5
#: kstars.kcfg:2064
#, kde-format
msgid "Default guide module ST4 Driver."
msgstr ""
#. i18n: ectx: label, entry (GuideExposure), group (Guide)
#. +> trunk5
#: kstars.kcfg:2067
#, kde-format
msgid "Guider exposure duration in seconds."
msgstr ""
#. i18n: ectx: label, entry (GuiderType), group (Guide)
#. +> trunk5
#: kstars.kcfg:2071
#, kde-format
msgid "Which guider process to utilize for guiding (0 Internal Guider, 1 PHD2, 2 lin_guider)"
msgstr ""
#. i18n: ectx: label, entry (GuideAlgorithm), group (Guide)
#. +> trunk5
#: kstars.kcfg:2075
#, kde-format
msgid "Which Algorithm to use track guide square (0 smart, 1 fast, 2 threshold, 3 no threshold)."
msgstr ""
#. i18n: ectx: label, entry (PHD2Host), group (Guide)
#. +> trunk5
#: kstars.kcfg:2079
#, kde-format
msgid "Host name of external PHD2 service"
msgstr ""
#. i18n: ectx: label, entry (PHD2Port), group (Guide)
#. +> trunk5
#: kstars.kcfg:2083
#, kde-format
msgid "PHD2 Event Monitoring Port"
msgstr ""
#. i18n: ectx: label, entry (LinGuiderHost), group (Guide)
#. +> trunk5
#: kstars.kcfg:2087
#, kde-format
msgid "Host name of external lin_guider service"
msgstr ""
#. i18n: ectx: label, entry (LinGuiderPort), group (Guide)
#. +> trunk5
#: kstars.kcfg:2091
#, kde-format
msgid "Lin_guider Event Monitoring Port"
msgstr ""
#. i18n: ectx: label, entry (GuideScopeType), group (Guide)
#. +> trunk5
#: kstars.kcfg:2095
#, kde-format
msgid "Index of telescope type to be used when guiding. 0 for Primary, 1 for Guide"
msgstr ""
#. i18n: ectx: label, entry (CalibrationPulseDuration), group (Guide)
#. +> trunk5
#: kstars.kcfg:2099
#, kde-format
msgid "Pulse duration in milliseconds used for guiding pulses during calibration stage."
msgstr ""
#. i18n: ectx: label, entry (GuideSquareSizeIndex), group (Guide)
#. +> trunk5
#: kstars.kcfg:2103
#, kde-format
msgid "Guide square size index (0 to 4) corresponding to pixel sizes (8 to 128)."
msgstr ""
#. i18n: ectx: label, entry (ImageGuidingEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:2107
#, kde-format
msgid "Use Image Guiding algorithms instead of classical centroid guiding."
msgstr ""
#. i18n: ectx: label, entry (GuideRegionAxis), group (Guide)
#. +> trunk5
#: kstars.kcfg:2111
#, kde-format
msgid "Region Axis Index (0 to 4) corresponding to NxN partition size used Image Guiding (64 to 1024)."
msgstr ""
#. i18n: ectx: label, entry (GuideAutoStarEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:2115
#, kde-format
msgid "Automatically select calibration star and perform calibration."
msgstr ""
#. i18n: ectx: label, entry (AutoModeIterations), group (Guide)
#. +> trunk5
#: kstars.kcfg:2123
#, kde-format
msgid "Number of automode iterations for calibration process."
msgstr ""
#. i18n: ectx: label, entry (GuideLostStarTimeout), group (Guide)
#. +> trunk5
#: kstars.kcfg:2127
#, kde-format
msgid "When star tracking is lost, wait this many seconds before aborting."
msgstr ""
#. i18n: ectx: label, entry (GuideMaxDeltaRMS), group (Guide)
#. +> trunk5
#: kstars.kcfg:2131
#, kde-format
msgid "Maximum delta RMS permitted while guiding before aborting."
msgstr ""
#. i18n: ectx: label, entry (TwoAxisEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:2135
#, kde-format
msgid "Use both axes to perform calibration."
msgstr ""
#. i18n: ectx: label, entry (RapidGuideEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:2139
#, kde-format
msgid "Use driver side Rapid Guide to perform guiding."
msgstr ""
#. i18n: ectx: label, entry (GuideDarkFrameEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:2143
#, kde-format
msgid "Take dark frame for autoguider images."
msgstr ""
#. i18n: ectx: label, entry (GuideSubframeEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:2147
#, kde-format
msgid "Subframe guide image around selected region"
msgstr ""
#. i18n: ectx: label, entry (DitherPixels), group (Guide)
#. +> trunk5
#: kstars.kcfg:2151
#, kde-format
msgid "How many pixels to move between subsequent exposures under auto dithering mode."
msgstr ""
#. i18n: ectx: label, entry (DitherFrames), group (Guide)
#. +> trunk5
#: kstars.kcfg:2155
#, kde-format
msgid "Dither after this many frames."
msgstr ""
#. i18n: ectx: label, entry (DitherThreshold), group (Guide)
#. +> trunk5
#: kstars.kcfg:2163
#, kde-format
msgid "Maximum distance (pixels) for guiding to be considered settled."
msgstr ""
#. i18n: ectx: label, entry (DitherTimeout), group (Guide)
#. +> trunk5
#: kstars.kcfg:2167
#, kde-format
msgid "Time limit (seconds) on dithering to settle down."
msgstr ""
#. i18n: ectx: label, entry (DitherMaxIterations), group (Guide)
#. +> trunk5
#: kstars.kcfg:2171
#, kde-format
msgid "How many dithering attempts to undertake before giving up."
msgstr ""
#. i18n: ectx: label, entry (DitherNoGuidingPulse), group (Guide)
#. +> trunk5
#: kstars.kcfg:2175
#, kde-format
msgid "Pulse length in milliseconds used for non-guiding dither."
msgstr ""
#. i18n: ectx: label, entry (DitherFailAbortsAutoGuide), group (Guide)
#. +> trunk5
#: kstars.kcfg:2179
#, kde-format
msgid "If dithering fails then abort autoguide."
msgstr ""
#. i18n: ectx: label, entry (DitherEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:2183
#, kde-format
msgid "Use Auto Dithering when guiding."
msgstr ""
#. i18n: ectx: label, entry (DitherNoGuiding), group (Guide)
#. +> trunk5
#: kstars.kcfg:2187
#, kde-format
msgid "Perform dithering even when not guiding."
msgstr ""
#. i18n: ectx: label, entry (AOLimit), group (Guide)
#. +> trunk5
#: kstars.kcfg:2191
#, kde-format
msgid "The Adaptive Optics unit is utilized if the guiding deviation is less than this limit in arcseconds. Once exceeded, mechanical guiding is utilized."
msgstr ""
#. i18n: ectx: label, entry (RAGuideEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:2195
#, kde-format
msgid "Enable autoguiding in the RA axis."
msgstr ""
#. i18n: ectx: label, entry (DECGuideEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:2199
#, kde-format
msgid "Enable autoguiding in the DEC axis."
msgstr ""
#. i18n: ectx: label, entry (NorthDECGuideEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:2203
#, kde-format
msgid "Enable North autoguiding in the DEC axis."
msgstr ""
#. i18n: ectx: label, entry (SouthDECGuideEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:2207
#, kde-format
msgid "Enable South autoguiding in the DEC axis."
msgstr ""
#. i18n: ectx: label, entry (EastRAGuideEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:2211
#, kde-format
msgid "Enable East autoguiding in the RA axis."
msgstr ""
#. i18n: ectx: label, entry (WestRAGuideEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:2215
#, kde-format
msgid "Enable West autoguiding in the RA axis."
msgstr ""
#. i18n: ectx: label, entry (GuiderAccuracyThreshold), group (Guide)
#. +> trunk5
#: kstars.kcfg:2252
#, kde-format
msgid "Accuracy threshold for the Guide Graphs."
msgstr ""
#. i18n: ectx: label, entry (RADisplayedOnGuideGraph), group (Guide)
#. +> trunk5
#: kstars.kcfg:2256
#, kde-format
msgid "Display the RA Plot on the Guide Drift Graphics."
msgstr ""
#. i18n: ectx: label, entry (DEDisplayedOnGuideGraph), group (Guide)
#. +> trunk5
#: kstars.kcfg:2260
#, kde-format
msgid "Display the DEC Plot on the Guide Drift Graphics."
msgstr ""
#. i18n: ectx: label, entry (RACorrDisplayedOnGuideGraph), group (Guide)
#. +> trunk5
#: kstars.kcfg:2264
#, kde-format
msgid "Display the RA Corrections Plot on the Guide Drift Graphics."
msgstr ""
#. i18n: ectx: label, entry (DECorrDisplayedOnGuideGraph), group (Guide)
#. +> trunk5
#: kstars.kcfg:2268
#, kde-format
msgid "Display the DEC Corrections Plot on the Guide Drift Graphics."
msgstr ""
#. i18n: ectx: whatsthis, entry (SchedulerLogging), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2274
#, kde-format
msgid "Log Ekos Scheduler Module activity."
msgstr ""
#. i18n: ectx: whatsthis, entry (SortSchedulerJobs), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2278
#, kde-format
msgid "Sort scheduler jobs by priority and altitude."
msgstr ""
#. i18n: ectx: label, entry (StopEkosAfterShutdown), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2282
#, kde-format
msgid "After shutdown procedure is successfully executed, shutdown INDI and Ekos."
msgstr ""
#. i18n: ectx: label, entry (ShutdownScriptTerminatesINDI), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2286
#, kde-format
msgid "Whether shutdown script, if exists, terminates INDI server in the process."
msgstr ""
#. i18n: ectx: label, entry (PreemptiveShutdown), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2290
#, kde-format
msgid "Perform pre-emptive shutdown if no jobs are due for a number of hours."
msgstr ""
#. i18n: ectx: label, entry (ResetMountModelOnAlignFail), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2294
#, kde-format
msgid "Reset mount model in case of alignment failure."
msgstr ""
#. i18n: ectx: label, entry (ResetMountModelBeforeJob), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2298
#, kde-format
msgid "Reset mount model before starting each job."
msgstr ""
#. i18n: ectx: label, entry (ResetGuideCalibration), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2302
#, kde-format
msgid "Always Reset guiding calibration before starting each job."
msgstr ""
#. i18n: ectx: label, entry (RealignAfterCalibrationFailure), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2306
#, kde-format
msgid "If guiding calibration fails, run alignment process again before proceeding to recalibration."
msgstr ""
#. i18n: ectx: label, entry (PreemptiveShutdownTime), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2310
#, kde-format
msgid "Maximum number of hours before the next job is due to trigger a pre-emptive shutdown."
msgstr ""
#. i18n: ectx: label, entry (RememberJobProgress), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2314
#, kde-format
msgid "When processing a scheduled job, resume the sequence starting from the last image present in storage."
msgstr ""
#. i18n: ectx: label, entry (LeadTime), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2318
#, kde-format
msgid "Minimum time between jobs in minutes."
msgstr ""
#. i18n: ectx: label, entry (PreDawnTime), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2322
#, kde-format
msgid "Do not permit jobs to be scheduled or executed past this many minutes before dawn."
msgstr ""
#. i18n: ectx: label, entry (SettingAltitudeCutoff), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2326
#, kde-format
msgid "Do not permit jobs to be scheduled less than this many degrees before the altitude restriction. Actual execution proceeds until the altitude limit."
msgstr ""
#. i18n: ectx: label, entry (DawnOffset), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2330
#, kde-format
msgid "Offset astronomical dawn by this many hours to relax twilight restriction when using narrowband filters."
msgstr ""
#. i18n: ectx: label, entry (DuskOffset), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2334
#, kde-format
msgid "Offset astronomical dusk by this many hours to relax twilight restriction when using narrowband filters."
msgstr ""
#. i18n: ectx: label, entry (TelescopeFocalLength), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2338
#, kde-format
msgid "Telescope focal length in millimeters."
msgstr ""
#. i18n: ectx: label, entry (CameraPixelWidth), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2342
#, kde-format
msgid "Camera pixel size width in micrometers."
msgstr ""
#. i18n: ectx: label, entry (CameraPixelHeight), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2346
#, kde-format
msgid "Camera pixel size height in micrometers."
msgstr ""
#. i18n: ectx: label, entry (CameraWidth), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2350
#, kde-format
msgid "Camera Width in pixels."
msgstr ""
#. i18n: ectx: label, entry (CameraHeight), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2354
#, kde-format
msgid "Camera Height in pixels."
msgstr ""
#. i18n: ectx: label, entry (CameraRotation), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2358
#, kde-format
msgid "Position angle of the camera with respect to north."
msgstr ""
#. i18n: ectx: label, entry (ErrorHandlingStrategy), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2362
#, kde-format
msgid "Strategy how to react, when a job aborts or steps into an error."
msgstr ""
#. i18n: ectx: label, entry (ErrorHandlingStrategyDelay), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2366
#, kde-format
msgid "Delay in minutes how long the scheduler should pause before restarting an aborted job or a job that ran into an error."
msgstr ""
#. i18n: ectx: label, entry (RescheduleErrors), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2370
#, kde-format
msgid "Re-schedule jobs that ran into errors."
msgstr ""
#. i18n: ectx: label, entry (LastServer), group (INDI Lite)
#. +> trunk5
#: kstars.kcfg:2376
#, kde-format
msgid "The address of last used server"
msgstr ""
#. i18n: ectx: label, entry (LastServerPort), group (INDI Lite)
#. +> trunk5
#: kstars.kcfg:2379
#, kde-format
msgid "The port of last used server"
msgstr ""
#. i18n: ectx: label, entry (LastWebManagerPort), group (INDI Lite)
#. +> trunk5
#: kstars.kcfg:2383
#, kde-format
msgid "The port of last used Web Manager"
msgstr ""
#. i18n: ectx: label, entry (HIPSMemoryCache), group (HIPS)
#. +> trunk5
#: kstars.kcfg:2389
#, kde-format
msgid "RAM cache size in MB used to store cached HIPS images."
msgstr ""
#. i18n: ectx: label, entry (HIPSNetCache), group (HIPS)
#. +> trunk5
#: kstars.kcfg:2393
#, kde-format
msgid "Hard disk cache size in MB used to store cached HIPS images."
msgstr ""
#. i18n: ectx: label, entry (HIPSSource), group (HIPS)
#. +> trunk5
#: kstars.kcfg:2397
#, kde-format
msgid "HIPS source catalog title."
msgstr ""
#. i18n: ectx: label, entry (HIPSBiLinearInterpolation), group (HIPS)
#. +> trunk5
#: kstars.kcfg:2401
#, kde-format
msgid "Use Bilinear interpolation when rendering HiPS images?"
msgstr ""
#. i18n: ectx: label, entry (HIPSShowGrid), group (HIPS)
#. +> trunk5
#: kstars.kcfg:2405
#, kde-format
msgid "Show HiPS grid on the sky map."
msgstr ""
#. i18n: ectx: label, entry (HIPSPanning), group (HIPS)
#. +> trunk5
#: kstars.kcfg:2409
#, kde-format
msgid "Redraw HiPS while panning."
msgstr ""
#. i18n: ectx: label, entry (ShowHIPS), group (HIPS)
#. +> trunk5
#: kstars.kcfg:2413
#, kde-format
msgid "Draw HiPS sources in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowHIPS), group (HIPS)
#. +> trunk5
#: kstars.kcfg:2414
#, kde-format
msgid "Toggle whether the HIPS sources are drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (warningActionsActive), group (Observatory)
#. +> trunk5
#: kstars.kcfg:2420
#, kde-format
msgid "Will be reacted upon warnings?"
msgstr ""
#. i18n: ectx: label, entry (alertActionsActive), group (Observatory)
#. +> trunk5
#: kstars.kcfg:2424
#, kde-format
msgid "Will be reacted upon alerts?"
msgstr ""
#. i18n: ectx: label, entry (weatherWarningCloseDome), group (Observatory)
#. +> trunk5
#: kstars.kcfg:2428
#, kde-format
msgid "Shall the dome being closed when a weather warning occurs?"
msgstr ""
#. i18n: ectx: label, entry (weatherWarningCloseShutter), group (Observatory)
#. +> trunk5
#: kstars.kcfg:2432
#, kde-format
msgid "Shall the shutter being closed when a weather warning occurs?"
msgstr ""
#. i18n: ectx: label, entry (weatherWarningStopScheduler), group (Observatory)
#. i18n: ectx: label, entry (weatherAlertCloseShutter), group (Observatory)
#. i18n: ectx: label, entry (weatherAlertStopScheduler), group (Observatory)
"You are running an unsupported version of Windows: %1.\n"
"This is not recommended. Do not report any bugs.\n"
"Please update to a supported version of Windows: Windows 7, 8, 8.1 or 10."
msgstr ""
#. +> trunk5 stable5
#: krita/main.cc:534 krita/main.cc:539
#, kde-format
msgid "Krita Tablet Support"
msgstr ""
#. +> trunk5 stable5
#: krita/main.cc:535
#, kde-format
msgid "Cannot load WinTab driver and no Windows Ink pen devices are found. If you have a drawing tablet, please make sure the tablet driver is properly installed."
msgstr ""
#. +> trunk5 stable5
#: krita/main.cc:540
#, kde-format
msgid "Cannot load WinTab driver. If you have a drawing tablet, please make sure the tablet driver is properly installed."
msgid "Adds pixels using the color of surrounding pixels. Produces smoother tonal gradations than Bilinear."
msgstr ""
#. +> trunk5 stable5
#: libs/image/kis_filter_strategy.h:97
#, kde-format
msgid "Nearest Neighbor"
msgstr ""
#. +> trunk5 stable5
#: libs/image/kis_filter_strategy.h:105
#, kde-format
msgid "Replicate pixels in the image. Preserves all the original detail, but can produce jagged effects."
msgstr ""
#. +> trunk5 stable5
#: libs/image/kis_filter_strategy.h:119
#: libs/ui/canvas/kis_canvas_controller.cpp:294
#, kde-format
msgid "Bilinear"
msgstr ""
#. +> trunk5 stable5
#: libs/image/kis_filter_strategy.h:125
#, kde-format
msgid "Adds pixels averaging the color values of surrounding pixels. Produces medium quality results when the image is scaled from half to two times the original size."
msgstr ""
#. +> trunk5 stable5
#: libs/image/kis_filter_strategy.h:135
#, kde-format
msgid "Bell"
msgstr ""
#. +> trunk5 stable5
#: libs/image/kis_filter_strategy.h:146
#, kde-format
msgid "BSpline"
msgstr ""
#. +> trunk5 stable5
#: libs/image/kis_filter_strategy.h:157
#, kde-format
msgid "Lanczos3"
msgstr ""
#. +> trunk5 stable5
#: libs/image/kis_filter_strategy.h:163
#, kde-format
msgid "Offers similar results than Bicubic, but maybe a little bit sharper. Can produce light and dark halos along strong edges."
msgid "This image is larger than <b>%1 x %2</b>. Images this size cannot be saved to this format."
msgstr ""
#. +> trunk5 stable5
#: libs/impex/ColorModelCheck.h:44
#, kde-format
msgctxt "image conversion warning"
msgid "The color model <b>%1</b> or channel depth <b>%2</b> cannot be saved to this format. Your image will be converted."
msgstr ""
#. +> trunk5 stable5
#: libs/impex/ColorModelHomogenousCheck.h:125
#, kde-format
msgctxt "image conversion warning"
msgid "Your image contains layers with a color model that is different from the image. The layers will be converted."
msgstr ""
#. +> trunk5 stable5
#: libs/impex/ColorModelPerLayerCheck.h:129
#, kde-format
msgctxt "image conversion warning"
msgid "Your image contains layers with the color model <b>%1</b> and channel depth <b>%2</b> which cannot be saved to this format. The layers will be converted."
msgstr ""
#. +> trunk5 stable5
#: libs/impex/CompositionsCheck.h:36
#, kde-format
msgctxt "image conversion warning"
msgid "The image contains <b>compositions</b>. The compositions will not be saved."
msgstr ""
#. +> trunk5 stable5
#: libs/impex/ExifCheck.h:40
#, kde-format
msgctxt "image conversion warning"
msgid "The image contains <b>Exif</b> metadata. The metadata will not be saved."
msgid "This merge strategy attempts to find the best solution for merging, for instance by merging the list of authors together, or keeping identical photographic information."
msgctxt "Heading for the list of Krita authors/developers"
msgid "Authors"
msgstr ""
#. +> trunk5 stable5
#: libs/ui/dialogs/kis_about_application.cpp:98
#, kde-format
msgid ""
"<html><head/><body>"
"<h1 align=\"center\">Backed By</h1>"
"<p>"
msgstr ""
#. +> trunk5 stable5
#: libs/ui/dialogs/kis_about_application.cpp:111
#, kde-format
msgid ""
".</p>"
"<p><i>Thanks! You were all <b>awesome</b>!</i></p>"
"</body></html>"
msgstr ""
#. +> trunk5 stable5
#: libs/ui/dialogs/kis_about_application.cpp:113
#, kde-format
msgid "Backers"
msgstr ""
#. +> trunk5 stable5
#: libs/ui/dialogs/kis_about_application.cpp:119
#, kde-format
msgid ""
"<html><head/><body>"
"<h1 align=\"center\">Thanks To</h1>"
"<p>"
msgstr ""
#. +> trunk5 stable5
#: libs/ui/dialogs/kis_about_application.cpp:138
#, kde-format
msgid ""
".</p>"
"<p><i>For supporting Krita development with advice, icons, brush sets and more.</i></p>"
"</body></html>"
msgstr ""
#. +> trunk5 stable5
#: libs/ui/dialogs/kis_about_application.cpp:141
#, kde-format
msgid "Also Thanks To"
msgstr ""
#. +> trunk5 stable5
#: libs/ui/dialogs/kis_about_application.cpp:145
#, kde-format
msgid ""
"<html><head/><body>"
"<h1 align=\"center\"><b>Your Rights</b></h1>"
"<p>Krita is released under the GNU General Public License (version 3 or any later version).</p>"
"<p>This license grants people a number of freedoms:</p>"
"<ul>"
"<li>You are free to use Krita, for any purpose</li>"
"<li>You are free to distribute Krita</li>"
"<li>You can study how Krita works and change it</li>"
"<li>You can distribute changed versions of Krita</li>"
"</ul>"
"<p>The Krita Foundation and its projects on krita.org are <b>committed</b> to preserving Krita as free software.</p>"
"<h1 align=\"center\">Your artwork</h1>"
"<p>What you create with Krita is your sole property. All your artwork is free for you to use as you like.</p>"
"<p>That means that Krita can be used commercially, for any purpose. There are no restrictions whatsoever.</p>"
"<p>Krita’s GNU GPL license guarantees you this freedom. Nobody is ever permitted to take it away, in contrast to trial or educational versions of commercial software that will forbid your work in commercial situations.</p>"
"<br/>"
"<hr/>"
"<pre>"
msgstr ""
#. +> trunk5 stable5
#: libs/ui/dialogs/kis_about_application.cpp:173
#, kde-format
msgid "License"
msgstr ""
#. +> trunk5 stable5
#: libs/ui/dialogs/kis_about_application.cpp:181
#, kde-format
msgid ""
"<html><head/><body>"
"<h1 align=\"center\"><b>Third-party Libraries used by Krita</b></h1>"
"<p>Krita is built on the following free software libraries:</p>"
msgid "The image data you want to paste does not have an ICM profile associated with it. If you do not select a profile, Krita will assume that the image data is encoded in the import profile defined in the Settings dialog."
msgid "Hue hopefully maintained (but not required), lightness and saturation sacrificed to maintain the perceived color. White point changed to result in neutral grays. Intended for images."
msgid "Hue and saturation maintained with lightness sacrificed to maintain saturation. White point changed to result in neutral grays. Intended for business graphics (make it colorful charts, graphs, overheads, ...)"
msgid "Within the destination device gamut; hue, lightness and saturation are maintained. Outside the gamut; hue and lightness are maintained, saturation is sacrificed. White point for source and destination; unchanged. Intended for spot colors (Pantone, TruMatch, logo colors, ...)"
"<p><a href=\"https://en.wikipedia.org/wiki/Color_space\"><span style=\" font-weight:600; text-decoration: underline; color:#006e28;\">Color Spaces</span></a> determine how colors are encoded in your files. Different color spaces have different properties and are used for different purposes.</p>"
"<p>Try to disable vsync for Krita. This makes painting more responsive. Uncheck only when experiencing crashes with some GPU/driver combinations.</p>"
"<p><span style=\" font-weight:600;\">Note:</span> This changes only the colorspace of the rendered image. To convert the colorspace of the layers, use Convert Image Colorspace.</p>"
"<p>Set how much you wish to correct the adaptation state. This will affect how <span style=\" font-style:italic;\">Absolute Colorimetric</span> changes the whites of your image. In Layman's terms: how much do you wish to have the color management correct the paper-color to screen white while using <span style=\" font-style:italic;\">Absolute Colorimetric</span>?</p>"
"<p>Black Point compensation matches the darkest color of the source device to the darkest color of the destination device. Relative Colorimetric without Black Point Compensation will show the difference between the darkest values. With blackpoint compensation, black is black.</p>"
"<p>When rendering animation frames (into files or during animation cache regeneration), Krita will make the specified number of copies of your image and will work on them in parallel. Each copy will demand more RAM for its storage (about 20% of the size of you image), so raise this limit only if you have enough RAM installed.</p>"
"<p><br/>"
"</p>"
"<p><span style=\" font-weight:600;\">Recommended value:</span> set Clones Limit to the number of <span style=\" text-decoration: underline;\">physical</span> (non-hyperthreaded) cores your CPU has</p>"
"<p>Krita will try to limit the number of screen updates per second to the given number. A lower number will decrease visual responsiveness but increase stylus precision on some systems like macOS."
"<p>When performance logging is enabled Krita saves timing information into the '<working_dir>/log' folder. If you experience performance problems and want to help us, enable this option and add the contents of the directory to a bug report.</p>"
"<p>Animation frame cache will be stored in RAM completely without any limitations</p>"
"<p><span style=\" font-weight:600;\">WARNING:</span> please make sure your computer has enough RAM <span style=\" text-decoration: underline;\">above</span> the amount you requested in General tab. Otherwise you might face system freezes.</p>"
"<p>* for 1 second of FullHD@25fps video you need extra 200 MiB of memory</p>"
"<p>* for 1 second of 4K UltraHD@25fps video you need extra 800 MiB of memory</p>"
"<p>Animation frames are stored on hard disk in the same folder as swap file. The cache is stored in a compressed way. Little amount of extra RAM is needed.</p>"
"<p>Since data transfer speed of the hard drive is low, you might want to limit cached frame size to be able to play your video at 25 fps. The limit of 2500 px is usually a good choice.</p>"
"<p>Render scaled down version of the frame if the image is bigger than the provided limit. Make sure you enable this option when using on-disk storage backend.</p>"
"<p>Choose the optional emblem icon that indicates extra information, such as the preset being a special effects brush, or just using tilt, or angled in some way.</p>"
"<p>Some tablet devices don't pass barrel-button clicks via tablet API. If you have such a device, you can try activate this workaround. Krita will try to read right- and middle-button clicks from the mouse events stream. It may or may not work on your device (depends on the tablet driver implementation).</p>"
"<p><br/>"
"</p>"
"<p>After changing this option Krita should be restarted.</p>"
msgid "The <i>Alternate Invocation</i> action performs an alternate action with the current tool. For example, using the brush tool it picks a color from the canvas."
"<p>The driver for your drawing tablet and Windows do not agree on the size of the screen your tablet is connected to. Please select the right option.</p>"
msgid "A spot color is a color that the printer is able to print without mixing the paints it has available to it. The opposite is called a process color."
msgid "The Intel graphics driver in use is known to have issues with OpenGL."
msgstr ""
#. +> trunk5 stable5
#: libs/ui/opengl/kis_opengl.cpp:492
#, kde-format
msgid "Intel graphics drivers tend to have issues with OpenGL so ANGLE will be used by default. You may manually switch to OpenGL but it is not guaranteed to work properly."
msgstr ""
#. +> trunk5 stable5
#: libs/ui/opengl/kis_opengl.cpp:875
#, kde-format
msgid "Preferred renderer doesn't support requested surface format. Another renderer has been selected."
msgstr ""
#. +> trunk5 stable5
#: libs/ui/opengl/kis_opengl.cpp:877
#, kde-format
msgid "Preferred output format is not supported by available renderers"
#. i18nc("Who made the profile?","Manufacturer: ") + currentColorSpace()->profile()->manufacturer() + "</p>"); //This would work if people actually wrote the manufacturer into the manufacturer fiedl...
"<b><a href=\"https://en.wikipedia.org/wiki/RGB_color_space\">RGB (Red, Green, Blue)</a></b>, is the color model used by screens and other light-based media.<br/>"
"RGB is an additive color model: adding colors together makes them brighter. This color model is the most extensive of all color models, and is recommended as a model for painting,that you can later convert to other spaces. RGB is also the recommended colorspace for HDR editing."
"<b><a href=\"https://en.wikipedia.org/wiki/CMYK_color_model\">CMYK (Cyan, Magenta, Yellow, Key)</a></b>, is the model used by printers and other ink-based media.<br/>"
"CMYK is a subtractive model, meaning that adding colors together will turn them darker. Because of CMYK profiles being very specific per printer, it is recommended to work in RGB space, and then later convert to a CMYK profile, preferably one delivered by your printer. <br/>"
"CMYK is <b>not</b> recommended for painting.Unfortunately, Krita cannot retrieve colorants or the TRC for this space."
msgid "<b><a href=\"https://en.wikipedia.org/wiki/CIE_1931_color_space\">CIE XYZ</a></b>is the space determined by the CIE as the space that encompasses all other colors, and used to convert colors between profiles. XYZ is an additive color model, meaning that adding colors together makes them brighter. XYZ is <b>not</b> recommended for painting, but can be useful to encode in. The Tone Response Curve is assumed to be linear."
"<b><a href=\"https://en.wikipedia.org/wiki/Grayscale\">Grayscale</a></b> only allows for gray values and transparent values. Grayscale images use half the memory and disk space compared to an RGB image of the same bit-depth.<br/>"
"Grayscale is useful for inking and grayscale images. In Krita, you can mix Grayscale and RGB layers in the same image."
"<b><a href=\"https://en.wikipedia.org/wiki/Lab_color_space\">L*a*b</a></b>. <b>L<b> stands for Lightness, the <b>a</b> and <b>b</b> components represent color channels.<br/>"
"L*a*b is a special model for color correction. It is based on human perception, meaning that it tries to encode the difference in lightness, red-green balance and yellow-blue balance. This makes it useful for color correction, but the vast majority of color maths in the blending modes do <b>not</b> work as expected here.<br/>"
"Similarly, Krita does not support HDR in LAB, meaning that HDR images converted to LAB lose color information. This colorspace is <b>not</b> recommended for painting, nor for export, but best as a space to do post-processing in. The TRC is assumed to be the L* TRC."
msgid "<b><a href=\"https://en.wikipedia.org/wiki/YCbCr\">YCbCr (Luma, Blue Chroma, Red Chroma)</a></b>, is a model designed for video encoding. It is based on human perception, meaning that it tries to encode the difference in lightness, red-green balance and yellow-blue balance. Chroma in this case is then a word indicating a special type of saturation, in these cases the saturation of Red and Blue, of which the desaturated equivalents are Green and Yellow respectively. It is available to open up certain images correctly, but Krita does not currently ship a profile for this due to lack of open source ICC profiles for YCrCb."
msgid "<b>8 bit integer</b>: The default number of colors per channel. Each channel will have 256 values available, leading to a total amount of colors of 256 to the power of the number of channels. Recommended to use for images intended for the web, or otherwise simple images."
msgid "<b>16 bit integer</b>: Also known as 'deep color'. 16 bit is ideal for editing images with a linear TRC, large color space, or just when you need more precise color blending. This does take twice as much space on the RAM and hard-drive than any given 8 bit image of the same properties, and for some devices it takes much more processing power. We recommend watching the RAM usage of the file carefully, or otherwise use 8 bit if your computer slows down. Take care to disable conversion optimization when converting from 16 bit/channel to 8 bit/channel."
msgctxt "When the selected Bitdepth is 16 bit float"
msgid "<b>16 bit floating point</b>: Also known as 'Half Floating Point', and the standard in VFX industry images. 16 bit float is ideal for editing images with a linear Tone Response Curve, large color space, or just when you need more precise color blending. It being floating point is an absolute requirement for Scene Referred (HDR) images. This does take twice as much space on the RAM and hard-drive than any given 8 bit image of the same properties, and for some devices it takes much more processing power. We recommend watching the RAM usage of the file carefully, or otherwise use 8 bit if your computer slows down."
msgctxt "When the selected Bitdepth is 32bit float"
msgid "<b>32 bit float point</b>: Also known as 'Full Floating Point'. 32 bit float is ideal for editing images with a linear TRC, large color space, or just when you need more precise color blending. It being floating point is an absolute requirement for Scene Referred (HDR) images. This does take four times as much space on the RAM and hard-drive than any given 8 bit image of the same properties, and for some devices it takes much more processing power. We recommend watching the RAM usage of the file carefully, or otherwise use 8 bit if your computer slows down."
msgctxt "When the selected Bitdepth is 64bit float, but this isn't actually available in Krita at the moment."
msgid "<b>64 bit float point</b>: 64 bit float is as precise as it gets in current technology, and this depth is used most of the time for images that are generated or used as an input for software. It being floating point is an absolute requirement for Scene Referred (HDR) images. This does take eight times as much space on the RAM and hard-drive than any given 8 bit image of the same properties, and for some devices it takes much more processing power. We recommend watching the RAM usage of the file carefully, or otherwise use 8 bit if your computer slows down."
msgctxt "These are Elle Stone's notes on her profiles that we ship."
msgid ""
"<p><b>Extra notes on profiles by Elle Stone:</b></p>"
"<p><i>Krita comes with a number of high quality profiles created by <a href=\"https://ninedegreesbelow.com\">Elle Stone</a>. This is a summary. Please check <a href=\"https://ninedegreesbelow.com/photography/lcms-make-icc-profiles.html\">the full documentation</a> as well.</i></p>"
msgctxt "These are Elle Stone's notes on her profiles that we ship."
msgid ""
"<p><b>Extra notes on profiles by Elle Stone:</b></p>"
"<p><i>Krita comes with a number of high quality profiles created by <a href=\"http://ninedegreesbelow.com\">Elle Stone</a>. This is a summary. Please check <a href=\"http://ninedegreesbelow.com/photography/lcms-make-icc-profiles.html\">the full documentation</a> as well.</i></p>"
msgid "<p>Quoting Wikipedia, 'Academy Color Encoding System (ACES) is a color image encoding system proposed by the Academy of Motion Picture Arts and Sciences that will allow for a fully encompassing color accurate workflow, with 'seamless interchange of high quality motion picture images regardless of source'.</p>"
msgid "<p>The ACEScg color space is smaller than the ACES color space, but large enough to contain the 'Rec-2020 gamut and the DCI-P3 gamut', unlike the ACES color space it has no negative values and contains only few colors that fall just barely outside the area of real colors humans can see</p>"
"<p>To avoid possible copyright infringement issues, I used 'ClayRGB' (following ArgyllCMS) as the base name for these profiles. As used below, 'Compatible with Adobe RGB 1998' is terminology suggested in the preamble to the AdobeRGB 1998 color space specifications.</p>"
"<p>The Adobe RGB 1998 color gamut covers a higher percentage of real-world cyans, greens, and yellow-greens than sRGB, but still doesn't include all printable cyans, greens, yellow-greens, especially when printing using today's high-end, wider gamut, ink jet printers. BetaRGB (not included in the profile pack) and Rec.2020 are better matches for the color gamuts of today's wide gamut printers.</p>"
"<p>The Adobe RGB 1998 color gamut is a reasonable approximation to some of today's high-end wide gamut monitors.</p>"
"<p>This profile's color gamut is roughly the same size and shape as the ACES color space gamut, and like the ACES color space, AllColorsRGB holds all possible real colors. But AllColorsRGB actually has a slightly larger color gamut (to capture some fringe colors that barely qualify as real when viewed by the standard observer) and uses the D50 white point.</p>"
"<p>Just like the ACES color space, AllColorsRGB holds a high percentage of imaginary colors. See the Completely <a href=\"https://ninedegreesbelow.com/photography/xyz-rgb.html\">Painless Programmer's Guide to XYZ, RGB, ICC, xyY, and TRCs</a> for more information about imaginary colors.</p>"
"<p>There is no particular reason why anyone would want to use this profile for editing, unless one needs to make sure your color space really does hold all possible real colors.</p>"
"<p>This profile's color gamut is roughly the same size and shape as the ACES color space gamut, and like the ACES color space, AllColorsRGB holds all possible real colors. But AllColorsRGB actually has a slightly larger color gamut (to capture some fringe colors that barely qualify as real when viewed by the standard observer) and uses the D50 white point.</p>"
"<p>Just like the ACES color space, AllColorsRGB holds a high percentage of imaginary colors. See the Completely <a href=\"http://ninedegreesbelow.com/photography/xyz-rgb.html\">Painless Programmer's Guide to XYZ, RGB, ICC, xyY, and TRCs</a> for more information about imaginary colors.</p>"
"<p>There is no particular reason why anyone would want to use this profile for editing, unless one needs to make sure your color space really does hold all possible real colors.</p>"
"<p>This profile is included mostly for its historical significance. It's the color space that was used in the original color matching experiments that led to the creation of the XYZ reference color space.</p>"
"<p>The ASTM E white point is probably the right E white point to use when making the CIERGB color space profile. It's not clear to me what the correct CIERGB primaries really are. Lindbloom gives one set. The LCMS version 1 tutorial gives a different set. Experts in the field contend that the real primaries should be calculated from the spectral wavelengths, so I did.</p>"
msgid "<p>The IdentityRGB working space is included in the profile pack because it's a mathematically obvious way to include all possible visible colors, though it has a higher percentage of imaginary colors than the ACES and AllColorsRGB color spaces. I cannot think of any reason why you'd ever want to actually edit images in the IdentityRGB working space.</p>"
"<p>To avoid possible copyright infringement issues, I used 'LargeRGB' (following RawTherapee) as the base name for these profiles."
"<p>Kodak designed the RIMM/ROMM (ProPhotoRGB) color gamut to include all printable and most real world colors. It includes some imaginary colors and excludes some of the real world blues and violet blues that can be captured by digital cameras. It also excludes some very saturated 'camera-captured' yellows as interpreted by some (and probably many) camera matrix input profiles.</p>"
"<p>The ProPhotoRGB primaries are hard-coded into Adobe products such as Lightroom and the Dng-DCP camera 'profiles'. However, other than being large enough to hold a lot of colors, ProPhotoRGB has no particular merit as an RGB working space. Personally I recommend the Rec.2020 or ACEScg profiles over ProPhotoRGB. But if you have an already well-established workflow using ProPhotoRGB, you might find a shift to another RGB working space a little odd, at least at first, and so you have to weight the pros and cons of changing your workflow.</p>"
"<p>To avoid possible copyright infringement issues, I used 'LargeRGB' (following RawTherapee) as the base name for these profiles."
"<p>Kodak designed the RIMM/ROMM (ProPhotoRGB) color gamut to include all printable and most real world colors. It includes some imaginary colors and excludes some of the real world blues and violet blues that can be captured by digital cameras. It also excludes some very saturated 'camera-captured' yellows as interpreted by some (and probably many) camera matrix input profiles.</p>"
"<p>The ProPhotoRGB primaries are hard-coded into Adobe products such as Lightroom and the Dng-DCP camera 'profiles'. However, other than being large enough to hold a lot of colors, ProPhotoRGB has no particular merit as an RGB working space. Personally I recommend the Rec.2020 or ACEScg profiles overProPhotoRGB. But if you have an already well-established workflow using ProPhotoRGB, youmight find a shift to another RGB working space a little odd, at least at first, and so youhave to weight the pros and cons of changing your workflow.</p>"
msgid "<p>Rec.2020 is the up-and-coming replacement for the thoroughly outdated sRGB color space. As of June 2015, very few (if any) display devices (and certainly no affordable display devices) can display all of Rec.2020. However, display technology is closing in on Rec.2020, movies are already being made for Rec.2020, and various cameras offer support for Rec.2020. And in the digital darkroom Rec.2020 is much more suitable as a general RGB working space than the exceedingly small sRGB color space.</p>"
"<p>Hewlett-Packard and Microsoft designed sRGB to match the color gamut of consumer-grade CRTs from the 1990s. sRGB is the standard color space for the world wide web and is still the best choice for exporting images to the internet.</p>"
"<p>The sRGB color gamut was a good match to calibrated decent quality CRTs. But sRGB is not a good match to many consumer-grade LCD monitors, which often cannot display the more saturated sRGB blues and magentas (the good news: as technology progresses, wider gamuts are trickling down to consumer grade monitors).</p>"
"<p>Printer color gamuts can easily exceed the sRGB color gamut in cyans, greens, and yellow-greens. Colors from interpolated camera raw files also often exceed the sRGB color gamut.</p>"
"<p>As a very relevant aside, using perceptual intent when converting to sRGB does not magically makes otherwise out of gamut colors fit inside the sRGB color gamut! The standard sRGB color space (along with all the other the RGB profiles provided in my profile pack) is a matrix profile, and matrix profiles don't have perceptual intent tables.</p>"
"<p>To avoid possible copyright infringement issues, I used 'WideRGB' as the base name for these profiles.</p>"
"<p>WideGamutRGB was designed by Adobe to be a wide gamut color space that uses spectral colors as its primaries. Pascale's primary values produce a profile that matches old V2 Widegamut profiles from Adobe and Canon. It is an interesting color space, but shortly after its introduction, Adobe switched their emphasis to the ProPhotoRGB color space.</p>"
msgid "<p>These profiles are for use with RGB images that have been converted to monotone gray (black and white). The main reason to convert from RGB to Gray is to save the file space needed to encode the image. Google places a premium on fast-loading web pages, and images are one of the slower-loading elements of a web page. So converting black and white images to Grayscale images does save some kilobytes. For grayscale images uploaded to the internet, convert the image to the V2 Gray profile with the sRGB TRC.</p>"
msgid "<p>The profiles that end in '-g10.icc' are linear gamma (gamma=1.0, 'linear light', etc) profiles and should only be used when editing at high bit depths (16-bit floating point, 16-bit integer, 32-bit floating point, 32-bit integer). Many editing operations produce better results in linear gamma color spaces.</p>"
msgid "<p>The profiles that end in '-labl.icc' have perceptually uniform TRCs. A few editing operations really should be done on perceptually uniform RGB. Make sure you use the V4 versions for editing high bit depth images.</p>"
msgid "<p>The profiles that end in '-srgbtrc.icc', '-g22.icc', and '-rec709.icc' have approximately but not exactly perceptually uniform TRCs. ProPhotoRGB's gamma=1.8 TRC is not quite as close to being perceptually uniform.</p>"
msgid "<p>When editing 8-bit images, you should use a profile with a small color gamut and an approximately or exactly perceptually uniform TRC. Of the profiles supplied in my profile pack, only the sRGB and AdobeRGB1998 (ClayRGB) color spaces are small enough for 8-bit editing. Even with the AdobeRGB1998 color space you need to be careful to not cause posterization. And of course you cannot use the linear gamma versions of these profiles for 8-bit editing.</p>"
msgid "<p>Use V4 profiles for editing images using high bit depth image editors that use LCMS as the Color Management Module. This includes Krita, digiKam/showFoto, and GIMP 2.9.</p>"
"Linear gamma RGB color spaces are not supposed to be used in 8-bit integer modes. It is suggested to use 16-bit integer or any floating point colorspace for linear profiles.\n"
"\n"
"Press \"Ok\" to create a 8-bit integer linear RGB color space or \"Cancel\" to return to the settings dialog."
msgstr ""
#. +> trunk5 stable5
#: libs/ui/widgets/kis_custom_image_widget.cc:513
#, kde-format
msgctxt "arg1: width. arg2: height. arg3: colorspace name. arg4: size of a channel in bits. arg5: image size"
msgid "This document will be %1 pixels by %2 pixels in %3, which means the pixel size is %4 bit. A single paint layer will thus take up %5 of RAM."
"<p>Enter search terms here to add resources to, or remove them from, the current tag view.</p>"
"<p>To filter based on the partial, case insensitive name of a resource:<br/>"
"<tt>partialname</tt> or <tt>!partialname</tt></p>"
"<p>To include or exclude other tag sets:<br/>"
"<tt>[Tagname]</tt> or <tt>![Tagname]</tt></p>"
"<p>For case sensitive and full name matching in-/exclusion:<br/>"
"<tt>\"ExactMatch\"</tt> or <tt>!\"ExactMatch\"</tt></p>"
msgstr ""
#. +> trunk5 stable5
#: libs/widgets/KoTagFilterWidget.cpp:62
#, kde-format
msgctxt "@info:tooltip"
msgid "<p>Filter results cannot be saved for the <b>All Presets</b> view. In this view, pressing <b>Enter</b> or clearing the filter box will restore all items. Create and/or switch to a different tag if you want to save filtered resources into named sets.</p>"
msgstr ""
#. +> trunk5 stable5
#: libs/widgets/KoTagFilterWidget.cpp:68
#, kde-format
msgctxt "@info:tooltip"
msgid "<p>Pressing <b>Enter</b> or clicking the <b>Save</b> button will save the changes.</p>"
msgstr ""
#. +> trunk5 stable5
#: libs/widgets/KoTagFilterWidget.cpp:75
#, kde-format
msgid "Search"
msgstr ""
#. +> trunk5 stable5
#: libs/widgets/KoTagFilterWidget.cpp:86
#, kde-format
msgctxt "@info:tooltip"
msgid "<qt>Save the currently filtered set as the new members of the current tag.</qt>"
"<html><b>KDE</b> is a world-wide network of software engineers, artists, writers, translators and facilitators who are committed to <a href=\"%1\">Free Software</a> development. This community has created hundreds of Free Software applications as part of the KDE frameworks, workspaces and applications.<br />"
"<br />"
"KDE is a cooperative enterprise in which no single entity controls the efforts or products of KDE to the exclusion of others. Everyone is welcome to join and contribute to KDE, including you.<br />"
"<br />"
"Visit <a href=\"%2\">%2</a> for more information about the KDE community and the software we produce.</html>"
"<html>Software can always be improved, and the KDE team is ready to do so. However, you - the user - must tell us when something does not work as expected or could be done better.<br />"
"<br />"
"KDE has a bug tracking system. Visit <a href=\"%1\">%1</a> or use the \"Report Bug...\" dialog from the \"Help\" menu to report bugs.<br />"
"<br />"
"If you have a suggestion for improvement then you are welcome to use the bug tracking system to register your wish. Make sure you use the severity called \"Wishlist\".</html>"
"<html>You do not have to be a software developer to be a member of the KDE team. You can join the national teams that translate program interfaces. You can provide graphics, themes, sounds, and improved documentation. You decide!<br />"
"<br />"
"Visit <a href=\"%1\">%1</a> for information on some projects in which you can participate.<br />"
"<br />"
"If you need more information or documentation, then a visit to <a href=\"%2\">%2</a> will provide you with what you need.</html>"
"<html>KDE software is and will always be available free of charge, however creating it is not free.<br />"
"<br />"
"To support development the KDE community has formed the KDE e.V., a non-profit organization legally founded in Germany. KDE e.V. represents the KDE community in legal and financial matters. See <a href=\"%1\">%1</a> for information on KDE e.V.<br />"
"<br />"
"KDE benefits from many kinds of contributions, including financial. We use the funds to reimburse members and others for expenses they incur when contributing. Further funds are used for legal support and organizing conferences and meetings. <br />"
" <br />"
"We would like to encourage you to support our efforts with a financial donation, using one of the ways described at <a href=\"%2\">%2</a>.<br />"
"<br />"
"Thank you very much in advance for your support.</html>"
"<p>Please read <b><a href=\"https://docs.krita.org/en/untranslatable_pages/reporting_bugs.html\">this guide</a></b> for reporting bugs first!</p>"
"<p>To submit a bug report, click on the button below. This will open a web browser window on <a href=\"https://bugs.kde.org\">https://bugs.kde.org</a> where you will find a form to fill in. The information displayed above will be transferred to that server.</p>"
"</qt>"
msgstr ""
#. +> stable5
#: libs/widgetutils/xmlgui/kbugreport.cpp:175
#, kde-format
msgid ""
"<qt>"
"<p>Please read <b><a href=\"https://docs.krita.org/en/untranslatable_pages/reporting_bugs.html\">this guide</a></b> for reporting bugs first!</p>"
"<p>To submit a bug report, click on the button below. This will open a web browser window on <a href=\"http://bugs.kde.org\">http://bugs.kde.org</a> where you will find a form to fill in. The information displayed above will be transferred to that server.</p>"
msgid "Here you can see a list of key bindings, i.e. associations between actions (e.g. 'Copy') shown in the left column and keys or combination of keys (e.g. Ctrl+V) shown in the right column."
msgid "Values goes from black to white, or black to the most saturated color. Saturation, in turn, goes from the most saturated color to white, gray or black."
"<p>This sets the gamma value that the linearised HSY Luminosity is crunched with. 1 makes the selector fully linear, 2.2 is a practical default value.</p>"
msgid "The location of FFmpeg is unknown. Please install FFmpeg first: Krita cannot render animations without FFmpeg. (<a href=\"https://www.ffmpeg.org\">www.ffmpeg.org</a>)"
"<p><span style=\" font-weight:600;\">Warning:</span> animated gif images cannot have a framerate higher than 50. The framerate will be reduced to 50 frames per second.</p>"
msgid "Krita tries to automatically check or uncheck this based on the information it can get from the profile you are converting from and the profile you are converting to."
msgid "The icon associated with this action. It is shown alongside text in the menu bar and in toolbars as required. A string to use KDE's image loading system, or a custom QPixmap or QIcon, or None."
msgid "<p>Failed to check version of dependency <application>%1</application>: Module do not have PEP396 <code>__version__</code> attribute. It is not disabled, but behaviour is unpredictable...</p>"
"<p>Select the location of the G'Mic-Qt plugin. You can download the plugin from the <a href=\"https://gmic.eu/\"><span style=\" text-decoration: underline; color:#2980b9;\">G'Mic website</span></a>. Make sure you download the special version for Krita, not the standalone or the GIMP version.</p>"
"<p>Select the location of the G'Mic-Qt plugin. You can download the plugin from the <a href=\"http://gmic.eu/\"><span style=\" text-decoration: underline; color:#2980b9;\">G'Mic website</span></a>. Make sure you download the special version for Krita, not the standalone or the GIMP version.</p>"
msgid "The formula decides how the kernel is created, so different formulas choose different values in the kernel, and thus give subtly different results."
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-family:'MS Shell Dlg 2'; font-size:8pt;\">This is a line of text before the inserted text. This is a line of inserted text. This is a line after the inserted text.</span></p>"
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-family:'MS Shell Dlg 2'; font-size:8pt;\">This is a line of text before the deleted text. This is a line of deleted text. This is a line after the deleted text.</span></p>"
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-family:'MS Shell Dlg 2'; font-size:8pt;\">This is a line of text before the format-change text. This is a line of text whose format has been changed. This is a line of text after the format-change text.</span></p>"
"<p style=\" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">It is possible to assign a named style to text and alter the style properties to change all text with that style.</p>"
"\n"
"<p style=\" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Applying a style change will reformat all text that previously got the named style assigned to it. Use the Styles docker to apply styles to text.</p>"
"The image contains pixels with zero alpha channel and non-zero color channels. Krita has modified those pixels to have at least some alpha. The initial values will <i>not</i> be reverted on saving the image back.<br/>"
"<br/>"
"This will hardly make any visual difference just keep it in mind."
msgstr ""
#. +> trunk5 stable5
#: plugins/impex/exr/exr_converter.cc:902
#, kde-format
msgctxt "@title:window"
msgid "EXR image has been modified"
msgstr ""
#. +> trunk5 stable5
#: plugins/impex/exr/exr_converter.cc:1302
#, kde-format
msgctxt "@item:unsupported-node-message"
msgid "%1 (type: \"%2\")"
msgstr ""
#. +> trunk5 stable5
#: plugins/impex/exr/exr_converter.cc:1307
#, kde-format
msgctxt "@info"
msgid ""
"<p>The following layers have a type that is not supported by EXR format:</p>"
"<r>"
"<ul>%1</ul>"
"</p>"
"<p><warning>these layers have <b>not</b> been saved to the final EXR file</warning></p>"
msgid "This option will merge all layers. It is advisable to check this option, otherwise other applications might not be able to read your file correctly."
"<p><span style=\" font-weight:600;\">PNG</span> files have <span style=\" font-style:italic;\">two</span> options to save <span style=\" font-weight:600;\">sRGB</span> information: as a tag or as an explicit profile. For use with in websites, <span style=\" font-style:italic;\">disable</span> this option. For interchange with other applications, <span style=\" font-style:italic;\">enable</span> this option.</p>"
msgid "Indexed PNG images are smaller. If you enabled this option, your image will be analyzed to see whether it is possible to save as an indexed PNG."
"<p>If enabled, all RAW files will be decoded in 16-bit color depth using a linear gamma curve. To prevent dark picture rendering in the editor, it is recommended to use Color Management in this mode.</p>"
"<p>If disabled, all RAW files will be decoded in 8-bit color depth with a BT.709 gamma curve and a 99th-percentile white point. This mode is faster than 16-bit decoding.</p>"
"<p>The default is to assume that all green pixels are the same. If even-row green pixels are more sensitive to ultraviolet light than odd-row this difference causes a mesh pattern in the output; using this option solves this problem with minimal loss of detail.</p>"
"<p>To resume, this option blurs the image a little, but it eliminates false 2x2 mesh patterns with VNG quality method or mazes with AHD quality method.</p>"
"<p>For Fuji Super CCD cameras, show the image tilted 45 degrees. For cameras with non-square pixels, do not stretch the image to its correct aspect ratio. In any case, this option guarantees that each output pixel corresponds to one RAW pixel.</p>"
"<p>Select here the demosaicing method to use when decoding RAW images. A demosaicing algorithm is a digital image process used to interpolate a complete image from the partial raw data received from the color-filtered image sensor, internal to many digital cameras, in form of a matrix of colored pixels. Also known as CFA interpolation or color reconstruction, another common spelling is demosaicing. The following methods are available for demosaicing RAW images:</p>"
"<p>"
"<ul>"
"<li><emphasis strong='true'>Bilinear</emphasis>: use high-speed but low-quality bilinear interpolation (default - for slow computers). In this method, the red value of a non-red pixel is computed as the average of the adjacent red pixels, and similarly for blue and green.</li>"
"<li><emphasis strong='true'>VNG</emphasis>: use Variable Number of Gradients interpolation. This method computes gradients near the pixel of interest and uses the lower gradients (representing smoother and more similar parts of the image) to make an estimate.</li>"
"<li><emphasis strong='true'>PPG</emphasis>: use Patterned-Pixel-Grouping interpolation. Pixel Grouping uses assumptions about natural scenery in making estimates. It has fewer color artifacts on natural images than the Variable Number of Gradients method.</li>"
"<li><emphasis strong='true'>AHD</emphasis>: use Adaptive Homogeneity-Directed interpolation. This method selects the direction of interpolation so as to maximize a homogeneity metric, thus typically minimizing color artifacts.</li>"
"<li><emphasis strong='true'>DCB</emphasis>: DCB interpolation from linuxphoto.org project.</li>"
"<li><emphasis strong='true'>AHD v2</emphasis>: modified AHD interpolation using Variance of Color Differences method.</li>"
"<li><emphasis strong='true'>AFD</emphasis>: Adaptive Filtered Demosaicing interpolation through 5 pass median filter from PerfectRaw project.</li>"
"<li><emphasis strong='true'>VCD</emphasis>: Variance of Color Differences interpolation.</li>"
"<li><emphasis strong='true'>VCD & AHD</emphasis>: Mixed demosaicing between VCD and AHD.</li>"
"<li><emphasis strong='true'>LMMSE</emphasis>: color demosaicing via directional linear minimum mean-square error estimation interpolation from PerfectRaw.</li>"
"<li><emphasis strong='true'>AMaZE</emphasis>: Aliasing Minimization interpolation and Zipper Elimination to apply color aberration removal from RawTherapee project.</li>"
"</ul>"
"</p>"
"<p>Note: some methods can be unavailable if RAW decoder have been built without extension packs.</p>"
"<p>Set here the passes used by the median filter applied after interpolation to Red-Green and Blue-Green channels.</p>"
"<p>This setting is only available for specific Quality options: <emphasis strong='true'>Bilinear</emphasis>, <emphasis strong='true'>VNG</emphasis>, <emphasis strong='true'>PPG</emphasis>, <emphasis strong='true'>AHD</emphasis>, <emphasis strong='true'>DCB</emphasis>, and <emphasis strong='true'>VCD & AHD</emphasis>.</p>"
"<li><emphasis strong='true'>Default D65</emphasis>: Use a standard daylight D65 white balance.</li>"
"<li><emphasis strong='true'>Camera</emphasis>: Use the white balance specified by the camera. If not available, reverts to default neutral white balance.</li>"
"<li><emphasis strong='true'>Automatic</emphasis>: Calculates an automatic white balance averaging the entire image.</li>"
"<li><emphasis strong='true'>Manual</emphasis>: Set a custom temperature and green level values.</li>"
msgid "<p>If enabled, images with overblown channels are processed much more accurately, without 'pink clouds' (and blue highlights under tungsten lamps).</p>"
"<p>Select here the noise reduction method to apply during RAW decoding.</p>"
"<p>"
"<ul>"
"<li><emphasis strong='true'>None</emphasis>: no noise reduction.</li>"
"<li><emphasis strong='true'>Wavelets</emphasis>: wavelets correction to erase noise while preserving real detail. It's applied after interpolation.</li>"
"<li><emphasis strong='true'>FBDD</emphasis>: Fake Before Demosaicing Denoising noise reduction. It's applied before interpolation.</li>"
"<li><emphasis strong='true'>CFA Line Denoise</emphasis>: Banding noise suppression. It's applied after interpolation.</li>"
"<li><emphasis strong='true'>Impulse Denoise</emphasis>: Impulse noise suppression. It's applied after interpolation.</li>"
"<p>If this option is turned on, it will try to shift image channels slightly and evaluate Chromatic Aberration change. Note that if you shot blue-red pattern, the method may fail. In this case, disable this option and tune manually color factors.</p>"
"<p>Select here the output color space used to decode RAW data.</p>"
"<p>"
"<ul>"
"<li><emphasis strong='true'>Raw (no profile)</emphasis>: in this mode, no output color space is used during RAW decoding.</li>"
"<li><emphasis strong='true'>sRGB</emphasis>: this is an RGB color space, created cooperatively by Hewlett-Packard and Microsoft. It is the best choice for images destined for the Web and portrait photography.</li>"
"<li><emphasis strong='true'>Adobe RGB</emphasis>: this color space is an extended RGB color space, developed by Adobe. It is used for photography applications such as advertising and fine art.</li>"
"<li><emphasis strong='true'>Wide Gamut</emphasis>: this color space is an expanded version of the Adobe RGB color space.</li>"
"<li><emphasis strong='true'>Pro-Photo</emphasis>: this color space is an RGB color space, developed by Kodak, that offers an especially large gamut designed for use with photographic outputs in mind.</li>"
"<li><emphasis strong='true'>Custom</emphasis>: use a custom output color space profile.</li>"
msgid "If checked, grid brush fill every particle's background with background color. The background of particle is rectangle of grid width and height and by default it is transparent."
"<p><b>Painting mode</b>: Krita offers a choice between two painting modes: <i>buildup</i> and <i>wash</i>. The first choice builds up color while painting in one stroke, the second choices gives you an even color in one stroke even if you go over the same place again and again.</p>"
msgid "These are keywords that can be used to identify text layers. A layer only needs to contain the keyword to be recognized. Keywords should be comma separated."
msgid "These are keywords that can be used to identify panel layers. A layer only needs to contain the keyword to be recognized. Keywords should be comma separated."
msgid "By default this will be filled with a generated universal unique identifier. The ID by itself is merely so that comic book library management programs can figure out if this particular comic is already in their database and whether it has been rated. Of course, the UUID can be changed into something else by manually changing the JSON, but this is advanced usage."
msgid "The genre of the work. Prefilled values are from the ACBF, but you can fill in your own. Separate genres with commas. Try to limit the amount to about two or three."
msgid "The following is a table of the authors that contributed to this comic. You can set their nickname, proper names (first, middle, last), role (penciller, inker, etc), email and homepage."
msgid "If there is an entry in a comics data base, that should be added here. It is unlikely to be a factor for comics from scratch, but useful when doing a conversion."
msgid "Whether the comic is an adaptation of an existing source, and if so, how to find information about that source. So for example, for an adapted webcomic, the official website url should go here."
msgid "Whether the comic is an adaption of an existing source, and if so, how to find information about that source. So for example, for an adapted webcomic, the official website url should go here."
msgid "Krita doesn't have write access to this folder, so new files cannot be made. Please configure the folder access or move the project to a folder that can be written to."
msgid "The location for extra autocompletion keys in the metadata editor. Point this at a folder containing key_characters/key_format/key_genre/key_rating/key_author_roles/key_other with inside txt files (csv for rating) containing the extra auto-completion keys, each on a new line. This path is stored in the Krita configuration, and not the project configuration."
"This allows you to make a template document with guides.\n"
"The width and height are the size of the live-area, the safe area is the live area minus the margins, and the full image is the live area plus the bleeds."
"<p>Your name for your script. This is used to calculate the name of your package, the name of the class in your package and the associated directory.</p>"
"<p>What you want to appear in the Tools-> Scripts menu. If you leave this blank a default entry will be created based on the name of the script. </p>"
"<p>If this is checked your script will be automatically enabled in Krita. That is, it will show up in the Scripts menu or docker list. If not, you will need to manually enable the script through the Krita->Settings menu entry. </p>"
msgid "<nobr>Blending controls the percentage of color that is picked</nobr> and mixed with your current brush color. A full blending value picks colors completely, ignoring brush color."
"<p>In \"Global Coordinates\" mode Width and Height fields show the size of the shape's bounding box in image-aligned coordinates, even when the shape is rotated or has any other transform. </p>"
"<p>If \"Global Coordinates\" mode is disabled, Width and Height fields show the shape's \"local\" size, before application of any transformations.</p>"
msgid "Sorry, Krita was built without the support of GNU Scientific Library, so you cannot scale the selection with handles. Please compile Krita with GNU Scientific Library support, or use options widget for editing scale values manually."
msgid "Switch between Build Up and Wash mode of painting. Build Up mode adds deformations one on top of the other without any limits. Wash mode gradually deforms the piece to the selected deformation level."
msgid "Move this field up in the list. The list order is important for the layout of the entry editor."
msgstr ""
#. +> trunk5 stable5
#: src/collectionfieldsdialog.cpp:138
#, kde-format
msgid "Move this field down in the list. The list order is important for the layout of the entry editor."
msgstr ""
#. +> trunk5 stable5
#: src/collectionfieldsdialog.cpp:149
#, kde-format
msgid "Field Properties"
msgstr ""
#. +> trunk5 stable5
#: src/collectionfieldsdialog.cpp:158
#, kde-format
msgid "&Title:"
msgstr ""
#. +> trunk5 stable5
#: src/collectionfieldsdialog.cpp:163
#, kde-format
msgid "The title of the field"
msgstr ""
#. +> trunk5 stable5
#: src/collectionfieldsdialog.cpp:168
#, kde-format
msgid "T&ype:"
msgstr ""
#. +> trunk5 stable5
#: src/collectionfieldsdialog.cpp:174
#, kde-format
msgid "The type of the field determines what values may be used. "
msgstr ""
#. +> trunk5 stable5
#: src/collectionfieldsdialog.cpp:175
#, kde-format
msgid "<i>Simple Text</i> is used for most fields. "
msgstr ""
#. +> trunk5 stable5
#: src/collectionfieldsdialog.cpp:176
#, kde-format
msgid "<i>Paragraph</i> is for large text blocks. "
msgstr ""
#. +> trunk5 stable5
#: src/collectionfieldsdialog.cpp:177
#, kde-format
msgid "<i>Choice</i> limits the field to certain values. "
msgstr ""
#. +> trunk5 stable5
#: src/collectionfieldsdialog.cpp:178
#, kde-format
msgid "<i>Checkbox</i> is for a simple yes/no value. "
msgstr ""
#. +> trunk5 stable5
#: src/collectionfieldsdialog.cpp:179
#, kde-format
msgid "<i>Number</i> indicates that the field contains a numerical value. "
msgstr ""
#. +> trunk5 stable5
#: src/collectionfieldsdialog.cpp:180
#, kde-format
msgid "<i>URL</i> is for fields which refer to URLs, including references to other files. "
msgstr ""
#. +> trunk5 stable5
#: src/collectionfieldsdialog.cpp:181
#, kde-format
msgid "A <i>Table</i> may hold one or more columns of values. "
msgstr ""
#. +> trunk5 stable5
#: src/collectionfieldsdialog.cpp:182
#, kde-format
msgid "An <i>Image</i> field holds a picture. "
msgstr ""
#. +> trunk5 stable5
#: src/collectionfieldsdialog.cpp:183
#, kde-format
msgid "A <i>Date</i> field can be used for values with a day, month, and year. "
msgstr ""
#. +> trunk5 stable5
#: src/collectionfieldsdialog.cpp:184
#, kde-format
msgid "A <i>Rating</i> field uses stars to show a rating number. "
msgstr ""
#. +> trunk5 stable5
#: src/collectionfieldsdialog.cpp:195
#, kde-format
msgid "Cate&gory:"
msgstr ""
#. +> trunk5 stable5
#: src/collectionfieldsdialog.cpp:200
#, kde-format
msgid "The field category determines where the field is placed in the editor."
msgstr ""
#. +> trunk5 stable5
#: src/collectionfieldsdialog.cpp:217
#, kde-format
msgid "Set &properties..."
msgstr ""
#. +> trunk5 stable5
#: src/collectionfieldsdialog.cpp:221
#, kde-format
msgid "Extended field properties are used to specify things such as the corresponding bibtex field."
msgstr ""
#. +> trunk5 stable5
#: src/collectionfieldsdialog.cpp:226
#, kde-format
msgid "Description:"
msgstr ""
#. +> trunk5 stable5
#: src/collectionfieldsdialog.cpp:233
#, kde-format
msgid "The description is a useful reminder of what information is contained in the field."
msgstr ""
#. +> trunk5 stable5
#: src/collectionfieldsdialog.cpp:238
#, kde-format
msgid "Value Options"
msgstr ""
#. +> trunk5 stable5
#: src/collectionfieldsdialog.cpp:243
#, kde-format
msgid "Default value:"
msgstr ""
#. +> trunk5 stable5
#: src/collectionfieldsdialog.cpp:248
#, kde-format
msgid "<qt>A default value can be set for new entries.</qt>"
msgstr ""
#. +> trunk5 stable5
#: src/collectionfieldsdialog.cpp:253
#, kde-format
msgid "Value template:"
msgstr ""
#. +> trunk5 stable5
#: src/collectionfieldsdialog.cpp:261
#, kde-format
msgid "Derived values are formed from the values of other fields according to the value template. Named fields, such as \"%{year} %{title}\", get substituted in the value."
msgstr ""
#. +> trunk5 stable5
#: src/collectionfieldsdialog.cpp:267
#, kde-format
msgid "Use derived value"
msgstr ""
#. +> trunk5 stable5
#: src/collectionfieldsdialog.cpp:273
#, kde-format
msgid "A&llowed values:"
msgstr ""
#. +> trunk5 stable5
#: src/collectionfieldsdialog.cpp:278
#, kde-format
msgid "<qt>For <i>Choice</i>-type fields, these are the only values allowed. They are placed in a combo box. The possible values have to be separated by a semi-colon, for example: \"dog; cat; mouse\"</qt>"
msgstr ""
#. +> trunk5 stable5
#: src/collectionfieldsdialog.cpp:285
#, kde-format
msgid "Format options:"
msgstr ""
#. +> trunk5 stable5
#: src/collectionfieldsdialog.cpp:291
#, kde-format
msgid "No formatting"
msgstr ""
#. +> trunk5 stable5
#: src/collectionfieldsdialog.cpp:292
#, kde-format
msgid "Allow auto-capitalization only"
msgstr ""
#. +> trunk5 stable5
#: src/collectionfieldsdialog.cpp:293
#, kde-format
msgid "Format as a title"
msgstr ""
#. +> trunk5 stable5
#: src/collectionfieldsdialog.cpp:294
#, kde-format
msgid "Format as a name"
msgstr ""
#. +> trunk5 stable5
#: src/collectionfieldsdialog.cpp:298
#, kde-format
msgid "Field Options"
msgstr ""
#. +> trunk5 stable5
#: src/collectionfieldsdialog.cpp:301
#, kde-format
msgid "Enable auto-completion"
msgstr ""
#. +> trunk5 stable5
#: src/collectionfieldsdialog.cpp:302
#, kde-format
msgid "If checked, KDE auto-completion will be enabled in the text edit box for this field."
msgstr ""
#. +> trunk5 stable5
#: src/collectionfieldsdialog.cpp:304
#, kde-format
msgid "Allow multiple values"
msgstr ""
#. +> trunk5 stable5
#: src/collectionfieldsdialog.cpp:305
#, kde-format
msgid "If checked, Tellico will parse the values in the field for multiple values, separated by a semi-colon."
msgstr ""
#. +> trunk5 stable5
#: src/collectionfieldsdialog.cpp:307
#, kde-format
msgid "Allow grouping"
msgstr ""
#. +> trunk5 stable5
#: src/collectionfieldsdialog.cpp:308
#, kde-format
msgid "If checked, this field may be used to group the entries in the group view."
msgstr ""
#. +> trunk5 stable5
#: src/collectionfieldsdialog.cpp:338
#, kde-format
msgid "Revert the selected field's properties to the default values."
msgstr ""
#. +> trunk5 stable5
#: src/collectionfieldsdialog.cpp:395
#, kde-format
msgid "Modify Fields"
msgstr ""
#. +> trunk5 stable5
#: src/collectionfieldsdialog.cpp:408
#, kde-format
msgid "<qt>Removing allowed values from the <i>%1</i> field which currently exist in the collection may cause data corruption. Do you want to keep your modified values or cancel and revert to the current ones?</qt>"
msgid "A field with this title already exists. Please enter a different title."
msgstr ""
#. +> trunk5 stable5
#: src/collectionfieldsdialog.cpp:921
#, kde-format
msgid "<qt>The category may not be empty. Please enter a category.</qt>"
msgstr ""
#. +> trunk5 stable5
#: src/collectionfieldsdialog.cpp:929
#, kde-format
msgid "<qt>A field may not be in the same category as a <em>Paragraph</em>, <em>Table</em> or <em>Image</em> field. Please enter a different category.</qt>"
msgstr ""
#. +> trunk5 stable5
#: src/collectionfieldsdialog.cpp:937
#, kde-format
msgid "A field's title may not be the same as an existing category. Please enter a different title."
msgstr ""
#. +> trunk5 stable5
#: src/collectionfieldsdialog.cpp:949
#, kde-format
msgid "The range for a rating field must be between 1 and 10, and the lower bound must be less than the higher bound. Please enter different low and high properties."
msgstr ""
#. +> trunk5 stable5
#: src/collectionfieldsdialog.cpp:964
#, kde-format
msgid "Tables are limited to a maximum of ten columns."
msgstr ""
#. +> trunk5 stable5
#: src/collectionfieldsdialog.cpp:970
#, kde-format
msgid "A field with a derived value must have a value template."
msgid "If checked, the file that was last open will be re-opened at program start-up."
msgstr ""
#. +> trunk5 stable5
#: src/configdialog.cpp:219
#, kde-format
msgid "&Show \"Tip of the Day\" at startup"
msgstr ""
#. +> trunk5 stable5
#: src/configdialog.cpp:220
#, kde-format
msgid "If checked, the \"Tip of the Day\" will be shown at program start-up."
msgstr ""
#. +> trunk5 stable5
#: src/configdialog.cpp:225
#, kde-format
msgid "&Enable webcam for barcode scanning"
msgstr ""
#. +> trunk5 stable5
#: src/configdialog.cpp:226
#, kde-format
msgid "If checked, the input from a webcam will be used to scan barcodes for searching."
msgstr ""
#. +> trunk5 stable5
#: src/configdialog.cpp:231
#, kde-format
msgid "Image Storage Options"
msgstr ""
#. +> trunk5 stable5
#: src/configdialog.cpp:233
#, kde-format
msgid "Store images in data file"
msgstr ""
#. +> trunk5 stable5
#: src/configdialog.cpp:234
#, kde-format
msgid "Store images in common application directory"
msgstr ""
#. +> trunk5 stable5
#: src/configdialog.cpp:235
#, kde-format
msgid "Store images in directory relative to data file"
msgstr ""
#. +> trunk5 stable5
#: src/configdialog.cpp:236
#, kde-format
msgid "Images may be saved in the data file itself, which can cause Tellico to run slowly, stored in the Tellico application directory, or stored in a directory in the same location as the data file."
msgid "If checked, titles and names will be automatically formatted."
msgstr ""
#. +> trunk5 stable5
#: src/configdialog.cpp:275
#, kde-format
msgid "No capitali&zation:"
msgstr ""
#. +> trunk5 stable5
#: src/configdialog.cpp:280
#, kde-format
msgid "<qt>A list of words which should not be capitalized. Multiple values should be separated by a semi-colon.</qt>"
msgstr ""
#. +> trunk5 stable5
#: src/configdialog.cpp:286
#, kde-format
msgid "Artic&les:"
msgstr ""
#. +> trunk5 stable5
#: src/configdialog.cpp:291
#, kde-format
msgid "<qt>A list of words which should be considered as articles if they are the first word in a title. Multiple values should be separated by a semi-colon.</qt>"
msgstr ""
#. +> trunk5 stable5
#: src/configdialog.cpp:298
#, kde-format
msgid "Personal suffi&xes:"
msgstr ""
#. +> trunk5 stable5
#: src/configdialog.cpp:303
#, kde-format
msgid "<qt>A list of suffixes which might be used in personal names. Multiple values should be separated by a semi-colon.</qt>"
msgstr ""
#. +> trunk5 stable5
#: src/configdialog.cpp:309
#, kde-format
msgid "Surname &prefixes:"
msgstr ""
#. +> trunk5 stable5
#: src/configdialog.cpp:314
#, kde-format
msgid "<qt>A list of prefixes which might be used in surnames. Multiple values should be separated by a semi-colon.</qt>"
msgid "Do you really want to delete these entries?"
msgstr ""
#. +> trunk5 stable5
#: src/controller.cpp:350
#, kde-format
msgid "Delete Multiple Entries"
msgstr ""
#. +> trunk5 stable5
#: src/controller.cpp:540 src/mainwindow.cpp:537
#, kde-format
msgid "&Edit Entry..."
msgstr ""
#. +> trunk5 stable5
#: src/controller.cpp:541 src/mainwindow.cpp:544
#, kde-format
msgid "D&uplicate Entry"
msgstr ""
#. +> trunk5 stable5
#: src/controller.cpp:542 src/mainwindow.cpp:630
#, kde-format
msgid "&Update Entry"
msgstr ""
#. +> trunk5 stable5
#: src/controller.cpp:543 src/mainwindow.cpp:551
#, kde-format
msgid "&Delete Entry"
msgstr ""
#. +> trunk5 stable5
#: src/controller.cpp:546
#, kde-format
msgid "&Edit Entries..."
msgstr ""
#. +> trunk5 stable5
#: src/controller.cpp:547
#, kde-format
msgid "D&uplicate Entries"
msgstr ""
#. +> trunk5 stable5
#: src/controller.cpp:548
#, kde-format
msgid "&Update Entries"
msgstr ""
#. +> trunk5 stable5
#: src/controller.cpp:549
#, kde-format
msgid "&Delete Entries"
msgstr ""
#. +> trunk5 stable5
#: src/controller.cpp:606
#, kde-format
msgid "The following items are already loaned, but Tellico does not currently support lending an item multiple times. They will be removed from the list of items to lend."
msgstr ""
#. +> trunk5 stable5
#: src/core/filehandler.cpp:150
#, kde-format
msgid "There is an XML parsing error in line %1, column %2."
msgstr ""
#. +> trunk5 stable5
#: src/core/filehandler.cpp:152
#, kde-format
msgid "The error message from Qt is:"
msgstr ""
#. +> trunk5 stable5
#: src/core/filehandler.cpp:184
#, kde-format
msgid "A file named \"%1\" already exists. Are you sure you want to overwrite it?"
msgstr ""
#. +> trunk5 stable5
#: src/core/filehandler.cpp:187
#, kde-format
msgid "Overwrite File?"
msgstr ""
#. +> trunk5 stable5
#: src/core/tellico_strings.cpp:29
#, kde-format
msgid "Tellico is unable to open the file - %1."
msgstr ""
#. +> trunk5 stable5
#: src/core/tellico_strings.cpp:30
#, kde-format
msgid "Tellico is unable to load the file - %1."
msgstr ""
#. +> trunk5 stable5
#: src/core/tellico_strings.cpp:31
#, kde-format
msgid "Tellico is unable to write the file - %1."
msgstr ""
#. +> trunk5 stable5
#: src/core/tellico_strings.cpp:32
#, kde-format
msgid "Tellico is unable to upload the file - %1."
msgstr ""
#. +> trunk5 stable5
#: src/core/tellico_strings.cpp:33
#, kde-format
msgid "Only collections with the same type of entries as the current one can be appended. No changes are being made to the current collection."
msgstr ""
#. +> trunk5 stable5
#: src/core/tellico_strings.cpp:36
#, kde-format
msgid "Only collections with the same type of entries as the current one can be merged. No changes are being made to the current collection."
msgstr ""
#. +> trunk5 stable5
#: src/core/tellico_strings.cpp:39
#, kde-format
msgid "Tellico is unable to load an image from the file - %1."
msgid "<qt>The <i>Icon View</i> shows each entry in the collection or group using an icon, which may be an image in the entry.</qt>"
msgstr ""
#. +> trunk5 stable5
#: src/entryiconview.cpp:115
#, kde-format
msgctxt "Open URL"
msgid "Open %1"
msgstr ""
#. +> trunk5 stable5
#: src/entryiconview.cpp:129
#, kde-format
msgid "&Sort By"
msgstr ""
#. +> trunk5 stable5
#: src/entrymatchdialog.cpp:56
#, kde-format
msgid "Select Match"
msgstr ""
#. +> trunk5 stable5
#: src/entrymatchdialog.cpp:75
#, kde-format
msgid "<qt><b>%1</b> returned multiple results which could match <b>%2</b>, the entry currently in the collection. Please select the correct match.</qt>"
msgid "Registration is required for accessing the %1 data source. If you agree to the terms and conditions, <a href='%2'>sign up for an account</a>, and enter your information below."
msgid "Set the collection type of the data returned from the external application."
msgstr ""
#. +> trunk5 stable5
#: src/fetch/execexternalfetcher.cpp:352
#, kde-format
msgid "&Result type: "
msgstr ""
#. +> trunk5 stable5
#: src/fetch/execexternalfetcher.cpp:361
#, kde-format
msgid "Set the result type of the data returned from the external application."
msgstr ""
#. +> trunk5 stable5
#: src/fetch/execexternalfetcher.cpp:366
#, kde-format
msgid "Application &path: "
msgstr ""
#. +> trunk5 stable5
#: src/fetch/execexternalfetcher.cpp:371
#, kde-format
msgid "Set the path of the application to run that should output a valid Tellico data file."
msgstr ""
#. +> trunk5 stable5
#: src/fetch/execexternalfetcher.cpp:376
#, kde-format
msgid "Select the search keys supported by the data source."
msgstr ""
#. +> trunk5 stable5
#: src/fetch/execexternalfetcher.cpp:378
#, kde-format
msgid "Add any arguments that may be needed. <b>%1</b> will be replaced by the search term."
msgstr ""
#. i18ncheckarg
#. +> trunk5 stable5
#: src/fetch/execexternalfetcher.cpp:379
#, kde-format
msgid "Arguments"
msgstr ""
#. +> trunk5 stable5
#: src/fetch/execexternalfetcher.cpp:411
#, kde-format
msgid "Update"
msgstr ""
#. +> trunk5 stable5
#: src/fetch/execexternalfetcher.cpp:419
#, kde-format
msgid ""
"<p>Enter the arguments which should be used to search for available updates to an entry.</p>"
"<p>The format is the same as for fields with derived values, where field names are contained inside braces, such as <i>%{author}</i>. See the documentation for details.</p>"
msgstr ""
#. +> trunk5 stable5
#: src/fetch/fetcher.cpp:78
#, kde-format
msgid "%1 does not allow searching for this collection type."
msgid "Enter the database name used by the server."
msgstr ""
#. +> trunk5 stable5
#: src/fetch/z3950fetcher.cpp:624
#, kde-format
msgid "Ch&aracter set: "
msgstr ""
#. +> trunk5 stable5
#: src/fetch/z3950fetcher.cpp:633
#, kde-format
msgid "Enter the character set encoding used by the z39.50 server. The most likely choice is MARC-8, although ISO-8859-1 is common as well."
msgstr ""
#. +> trunk5 stable5
#: src/fetch/z3950fetcher.cpp:639
#, kde-format
msgid "&Format: "
msgstr ""
#. +> trunk5 stable5
#: src/fetch/z3950fetcher.cpp:642
#, kde-format
msgid "Auto-detect"
msgstr ""
#. +> trunk5 stable5
#: src/fetch/z3950fetcher.cpp:651
#, kde-format
msgid "Enter the data format used by the z39.50 server. Tellico will attempt to automatically detect the best setting if <i>auto-detect</i> is selected."
msgid "Enter the authentication user name used by the z39.50 database. Most servers do not need one."
msgstr ""
#. +> trunk5 stable5
#: src/fetch/z3950fetcher.cpp:669
#, kde-format
msgid "Pass&word: "
msgstr ""
#. +> trunk5 stable5
#: src/fetch/z3950fetcher.cpp:676
#, kde-format
msgid "Enter the authentication password used by the z39.50 database. Most servers do not need one. The password will be saved in plain text in the Tellico configuration file."
msgstr ""
#. +> trunk5 stable5
#: src/fetchdialog.cpp:83
#, kde-format
msgid "&Search"
msgstr ""
#. +> trunk5 stable5
#: src/fetchdialog.cpp:84
#, kde-format
msgid "&Stop"
msgstr ""
#. +> trunk5 stable5
#: src/fetchdialog.cpp:143
#, kde-format
msgid "Internet Search"
msgstr ""
#. +> trunk5 stable5
#: src/fetchdialog.cpp:154
#, kde-format
msgid "Search Query"
msgstr ""
#. +> trunk5 stable5
#: src/fetchdialog.cpp:163
#, kde-format
msgctxt "Start the search"
msgid "S&earch:"
msgstr ""
#. +> trunk5 stable5
#: src/fetchdialog.cpp:169
#, kde-format
msgid "Enter a search value. An ISBN search must include the full ISBN."
msgstr ""
#. +> trunk5 stable5
#: src/fetchdialog.cpp:179
#, kde-format
msgid "Choose the type of search"
msgstr ""
#. +> trunk5 stable5
#: src/fetchdialog.cpp:186
#, kde-format
msgid "Click to start or stop the search"
msgstr ""
#. +> trunk5 stable5
#: src/fetchdialog.cpp:205
#, kde-format
msgid "&Multiple ISBN/UPC search"
msgstr ""
#. +> trunk5 stable5
#: src/fetchdialog.cpp:207
#, kde-format
msgid "Check this box to search for multiple ISBN or UPC values."
msgstr ""
#. +> trunk5 stable5
#: src/fetchdialog.cpp:211
#, kde-format
msgid "Edit ISBN/UPC values..."
msgstr ""
#. +> trunk5 stable5
#: src/fetchdialog.cpp:215
#, kde-format
msgid "Click to open a text edit box for entering or editing multiple ISBN or UPC values."
msgstr ""
#. +> trunk5 stable5
#: src/fetchdialog.cpp:221
#, kde-format
msgid "Search s&ource:"
msgstr ""
#. +> trunk5 stable5
#: src/fetchdialog.cpp:232
#, kde-format
msgid "Select the database to search"
msgstr ""
#. +> trunk5 stable5
#: src/fetchdialog.cpp:251
#, kde-format
msgid "Source"
msgstr ""
#. +> trunk5 stable5
#: src/fetchdialog.cpp:262
#, kde-format
msgid "As results are found, they are added to this list. Selecting one will fetch the complete entry and show it in the view below."
msgstr ""
#. +> trunk5 stable5
#: src/fetchdialog.cpp:271
#, kde-format
msgid "An entry may be shown here before adding it to the current collection by selecting it in the list above"
msgstr ""
#. +> trunk5 stable5
#: src/fetchdialog.cpp:279
#, kde-format
msgid "&Add Entry"
msgstr ""
#. +> trunk5 stable5
#: src/fetchdialog.cpp:284
#, kde-format
msgid "Add the selected entry to the current collection"
msgstr ""
#. +> trunk5 stable5
#: src/fetchdialog.cpp:287
#, kde-format
msgid "Get More Results"
msgstr ""
#. +> trunk5 stable5
#: src/fetchdialog.cpp:291
#, kde-format
msgid "Fetch more results from the current data source"
msgid "Replace the current collection with the contents of the imported file."
msgstr ""
#. +> trunk5 stable5
#: src/importdialog.cpp:90
#, kde-format
msgid "A&ppend to current collection"
msgstr ""
#. +> trunk5 stable5
#: src/importdialog.cpp:91
#, kde-format
msgid "Append the contents of the imported file to the current collection. This is only possible when the collection types match."
msgstr ""
#. +> trunk5 stable5
#: src/importdialog.cpp:94
#, kde-format
msgid "&Merge with current collection"
msgstr ""
#. +> trunk5 stable5
#: src/importdialog.cpp:95
#, kde-format
msgid "Merge the contents of the imported file to the current collection. This is only possible when the collection types match. Entries must match exactly in order to be merged."
msgid "The following items are being checked out:"
msgstr ""
#. +> trunk5 stable5
#: src/loandialog.cpp:125
#, kde-format
msgid "The following item is on-loan:"
msgstr ""
#. +> trunk5 stable5
#: src/loandialog.cpp:136
#, kde-format
msgid "&Lend to:"
msgstr ""
#. +> trunk5 stable5
#: src/loandialog.cpp:150
#, kde-format
msgid "Enter the name of the person borrowing the items from you. Clicking the button allows you to select from your address book."
msgstr ""
#. +> trunk5 stable5
#: src/loandialog.cpp:159
#, kde-format
msgid "&Loan date:"
msgstr ""
#. +> trunk5 stable5
#: src/loandialog.cpp:166
#, kde-format
msgid "The check-out date is the date that you lent the items. By default, today's date is used."
msgstr ""
#. +> trunk5 stable5
#: src/loandialog.cpp:175
#, kde-format
msgid "D&ue date:"
msgstr ""
#. +> trunk5 stable5
#: src/loandialog.cpp:183
#, kde-format
msgid "The due date is when the items are due to be returned. The due date is not required, unless you want to add the loan to your active calendar."
msgstr ""
#. +> trunk5 stable5
#: src/loandialog.cpp:188
#, kde-format
msgid "&Note:"
msgstr ""
#. +> trunk5 stable5
#: src/loandialog.cpp:196
#, kde-format
msgid "You can add notes about the loan."
msgstr ""
#. +> trunk5 stable5
#: src/loandialog.cpp:200
#, kde-format
msgid "&Add a reminder to the active calendar"
msgstr ""
#. +> trunk5 stable5
#: src/loandialog.cpp:204
#, kde-format
msgid "<qt>Checking this box will add a <em>To-do</em> item to your active calendar, which can be viewed using KOrganizer. The box is only active if you set a due date.</qt>"
msgid "Convert a book collection to a bibliography"
msgstr ""
#. +> trunk5 stable5
#: src/mainwindow.cpp:600
#, kde-format
msgid "String &Macros..."
msgstr ""
#. +> trunk5 stable5
#: src/mainwindow.cpp:602
#, kde-format
msgid "Edit the bibtex string macros"
msgstr ""
#. +> trunk5 stable5
#: src/mainwindow.cpp:605
#, kde-format
msgid "Check for Duplicate Keys..."
msgstr ""
#. +> trunk5 stable5
#: src/mainwindow.cpp:607
#, kde-format
msgid "Check for duplicate citation keys"
msgstr ""
#. +> trunk5 stable5
#: src/mainwindow.cpp:614
#, kde-format
msgid "Copy Bibtex to Cli&pboard"
msgstr ""
#. +> trunk5 stable5
#: src/mainwindow.cpp:615
#, kde-format
msgid "Copy bibtex citations to the clipboard"
msgstr ""
#. +> trunk5 stable5
#: src/mainwindow.cpp:620
#, kde-format
msgid "Cite Entry in &LyX"
msgstr ""
#. +> trunk5 stable5
#: src/mainwindow.cpp:621
#, kde-format
msgid "Cite the selected entries in LyX"
msgstr ""
#. +> trunk5 stable5
#: src/mainwindow.cpp:632
#, kde-format
msgctxt "Update Entry"
msgid "Update"
msgstr ""
#. +> trunk5 stable5
#: src/mainwindow.cpp:637
#, kde-format
msgid "All Sources"
msgstr ""
#. +> trunk5 stable5
#: src/mainwindow.cpp:638
#, kde-format
msgid "Update entry data from all available sources"
msgstr ""
#. +> trunk5 stable5
#: src/mainwindow.cpp:649
#, kde-format
msgid "Unlock Layout"
msgstr ""
#. +> trunk5 stable5
#: src/mainwindow.cpp:650
#, kde-format
msgid "Unlock the window's layout"
msgstr ""
#. +> trunk5 stable5
#: src/mainwindow.cpp:652
#, kde-format
msgid "Lock Layout"
msgstr ""
#. +> trunk5 stable5
#: src/mainwindow.cpp:653
#, kde-format
msgid "Lock the window's layout"
msgstr ""
#. +> trunk5 stable5
#: src/mainwindow.cpp:658
#, kde-format
msgid "Reset Layout"
msgstr ""
#. +> trunk5 stable5
#: src/mainwindow.cpp:659
#, kde-format
msgid "Reset the window's layout"
msgstr ""
#. +> trunk5 stable5
#: src/mainwindow.cpp:662
#, kde-format
msgid "Entry &Editor"
msgstr ""
#. +> trunk5 stable5
#: src/mainwindow.cpp:664
#, kde-format
msgid "Enable/disable the editor"
msgstr ""
#. +> trunk5 stable5
#: src/mainwindow.cpp:684
#, kde-format
msgid "Change Grouping"
msgstr ""
#. +> trunk5 stable5
#: src/mainwindow.cpp:687
#, kde-format
msgid "&Group Selection"
msgstr ""
#. +> trunk5 stable5
#: src/mainwindow.cpp:688
#, kde-format
msgid "Change the grouping of the collection"
msgstr ""
#. +> trunk5 stable5
#: src/mainwindow.cpp:698
#, kde-format
msgid "Filter here..."
msgstr ""
#. +> trunk5 stable5
#: src/mainwindow.cpp:755
#, kde-format
msgid "<qt>The <i>Entry View</i> shows a formatted view of the entry's contents.</qt>"
msgstr ""
#. +> trunk5 stable5
#: src/mainwindow.cpp:765
#, kde-format
msgid "Collection View"
msgstr ""
#. +> trunk5 stable5
#: src/mainwindow.cpp:772
#, kde-format
msgid "<qt>The <i>Column View</i> shows the value of multiple fields for each entry.</qt>"
msgstr ""
#. +> trunk5 stable5
#: src/mainwindow.cpp:789
#, kde-format
msgid "Group View"
msgstr ""
#. +> trunk5 stable5
#: src/mainwindow.cpp:798
#, kde-format
msgid "Groups"
msgstr ""
#. +> trunk5 stable5
#: src/mainwindow.cpp:799
#, kde-format
msgid "<qt>The <i>Group View</i> sorts the entries into groupings based on a selected field.</qt>"
msgstr ""
#. +> trunk5 stable5
#: src/mainwindow.cpp:873
#, kde-format
msgid "Welcome to the Tellico Collection Manager"
msgstr ""
#. +> trunk5 stable5
#: src/mainwindow.cpp:875
#, kde-format
msgid ""
"<h3>Tellico is a tool for managing collections of books, videos, music, and whatever else you want to catalog.</h3>"
"<h3>New entries can be added to your collection by <a href=\"tc:///coll_new_entry\">entering data manually</a> or by <a href=\"tc:///edit_search_internet\">downloading data</a> from various Internet sources.</h3>"
"<p>You are saving a file with many images, which causes Tellico to slow down significantly. Do you want to save the images separately in Tellico's data directory to improve performance?</p>"
"<p>Your choice can always be changed in the configuration dialog.</p>"
msgid "The row delimiter separates values in each row of a <i>Table</i> field."
msgstr ""
#. +> trunk5 stable5
#: src/translators/csvimporter.cpp:221
#, kde-format
msgid "Select the type of collection being imported."
msgstr ""
#. +> trunk5 stable5
#: src/translators/csvimporter.cpp:225
#, kde-format
msgid "&First row contains field titles"
msgstr ""
#. +> trunk5 stable5
#: src/translators/csvimporter.cpp:226
#, kde-format
msgid "If checked, the first row is used as field titles."
msgstr ""
#. +> trunk5 stable5
#: src/translators/csvimporter.cpp:235
#, kde-format
msgid "Delimiter:"
msgstr ""
#. +> trunk5 stable5
#: src/translators/csvimporter.cpp:241
#, kde-format
msgid "&Comma"
msgstr ""
#. +> trunk5 stable5
#: src/translators/csvimporter.cpp:247
#, kde-format
msgid "&Semicolon"
msgstr ""
#. +> trunk5 stable5
#: src/translators/csvimporter.cpp:252
#, kde-format
msgid "Ta&b"
msgstr ""
#. +> trunk5 stable5
#: src/translators/csvimporter.cpp:257
#, kde-format
msgid "Ot&her:"
msgstr ""
#. +> trunk5 stable5
#: src/translators/csvimporter.cpp:315
#, kde-format
msgid "The table shows up to the first five lines of the CSV file."
msgstr ""
#. +> trunk5 stable5
#: src/translators/csvimporter.cpp:322
#, kde-format
msgid "<qt>Set each column to correspond to a field in the collection by choosing a column, selecting the field, then clicking the <i>Assign Field</i> button.</qt>"
msgstr ""
#. +> trunk5 stable5
#: src/translators/csvimporter.cpp:324
#, kde-format
msgid "Co&lumn:"
msgstr ""
#. +> trunk5 stable5
#: src/translators/csvimporter.cpp:337
#, kde-format
msgid "&Data field in this column:"
msgstr ""
#. +> trunk5 stable5
#: src/translators/csvimporter.cpp:350
#, kde-format
msgid "&Assign Field"
msgstr ""
#. +> trunk5 stable5
#: src/translators/csvimporter.cpp:386
#, kde-format
msgid "At least one column must be assigned to a field. Only assigned columns will be imported."
msgstr ""
#. +> trunk5 stable5
#: src/translators/csvimporter.cpp:561
#, kde-format
msgid "Review"
msgstr ""
#. +> trunk5 stable5
#: src/translators/csvimporter.cpp:653
#, kde-format
msgid "<New Field>"
msgstr ""
#. +> trunk5 stable5
#: src/translators/filelistingimporter.cpp:81
#, kde-format
msgid "Scanning files..."
msgstr ""
#. +> trunk5 stable5
#: src/translators/filelistingimporter.cpp:259
#, kde-format
msgid "File Listing Options"
msgstr ""
#. +> trunk5 stable5
#: src/translators/filelistingimporter.cpp:262
#, kde-format
msgid "Recursive folder search"
msgstr ""
#. +> trunk5 stable5
#: src/translators/filelistingimporter.cpp:263
#, kde-format
msgid "If checked, folders are recursively searched for all files."
msgstr ""
#. +> trunk5 stable5
#: src/translators/filelistingimporter.cpp:267
#, kde-format
msgid "Generate file previews"
msgstr ""
#. +> trunk5 stable5
#: src/translators/filelistingimporter.cpp:268
#, kde-format
msgid "If checked, previews of the file contents are generated, which can slow down the folder listing."
msgstr ""
#. +> trunk5 stable5
#: src/translators/freedbimporter.cpp:106
#: src/translators/freedbimporter.cpp:189
#, kde-format
msgid "<qt>Tellico was unable to access the CD-ROM device - <i>%1</i>.</qt>"
msgstr ""
#. +> trunk5 stable5
#: src/translators/freedbimporter.cpp:214
#, kde-format
msgid "Select CDDB Entry"
msgstr ""
#. +> trunk5 stable5
#: src/translators/freedbimporter.cpp:215
#, kde-format
msgid "Select a CDDB entry:"
msgstr ""
#. +> trunk5 stable5
#: src/translators/freedbimporter.cpp:238
#, kde-format
msgid "<qt>No records were found to match the CD.</qt>"
msgstr ""
#. +> trunk5 stable5
#: src/translators/freedbimporter.cpp:256
#, kde-format
msgid "<qt>Tellico was unable to complete the CD lookup.</qt>"
msgstr ""
#. +> trunk5 stable5
#: src/translators/freedbimporter.cpp:484
#, kde-format
msgid "Various"
msgstr ""
#. +> trunk5 stable5
#: src/translators/freedbimporter.cpp:504
#, kde-format
msgid "Audio CD Options"
msgstr ""
#. +> trunk5 stable5
#: src/translators/freedbimporter.cpp:511
#, kde-format
msgid "Read data from CD-ROM device"
msgstr ""
#. +> trunk5 stable5
#: src/translators/freedbimporter.cpp:514
#, kde-format
msgid "Select or input the CD-ROM device location."
msgstr ""
#. +> trunk5 stable5
#: src/translators/freedbimporter.cpp:523
#, kde-format
msgid "Read all CDDB cache files only"
msgstr ""
#. +> trunk5 stable5
#: src/translators/freedbimporter.cpp:524
#, kde-format
msgid "Read data recursively from all the CDDB cache files contained in the default cache folders."
msgstr ""
#. +> trunk5 stable5
#: src/translators/gcstarimporter.cpp:125
#: src/translators/gcstarimporter.cpp:272
#, kde-format
msgid "<qt>The file is not a valid GCstar data file.</qt>"
msgstr ""
#. +> trunk5 stable5
#: src/translators/goodreadsimporter.cpp:127
#, kde-format
msgid "Goodreads Options"
msgstr ""
#. +> trunk5 stable5
#: src/translators/htmlexporter.cpp:96
#, kde-format
msgid "HTML"
msgstr ""
#. +> trunk5 stable5
#: src/translators/htmlexporter.cpp:333
#, kde-format
msgid "(grouped by %1)"
msgstr ""
#. +> trunk5 stable5
#: src/translators/htmlexporter.cpp:495
#, kde-format
msgid "HTML Options"
msgstr ""
#. +> trunk5 stable5
#: src/translators/htmlexporter.cpp:498
#, kde-format
msgid "Print field headers"
msgstr ""
#. +> trunk5 stable5
#: src/translators/htmlexporter.cpp:503
#, kde-format
msgid "Group the entries"
msgstr ""
#. +> trunk5 stable5
#: src/translators/htmlexporter.cpp:508
#, kde-format
msgid "Export individual entry files"
msgstr ""
#. +> trunk5 stable5
#: src/translators/htmlexporter.cpp:509
#, kde-format
msgid "If checked, individual files will be created for each entry."
msgstr ""
#. +> trunk5 stable5
#: src/translators/importer.cpp:57
#, kde-format
msgid "Loading data..."
msgstr ""
#. +> trunk5 stable5
#: src/translators/importer.cpp:58
#, kde-format
msgid "Loading %1..."
msgstr ""
#. +> trunk5 stable5
#: src/translators/librarythingimporter.cpp:142
#, kde-format
msgid "LibraryThing Options"
msgstr ""
#. +> trunk5 stable5
#: src/translators/librarythingimporter.cpp:145
#, kde-format
msgid "Export your LibraryThing collection in <a href=\"https://www.librarything.com/export.php?export_type=json\">JSON format</a>."
msgstr ""
#. +> trunk5 stable5
#: src/translators/librarythingimporter.cpp:150
#, kde-format
msgid "JSON Files"
msgstr ""
#. +> trunk5 stable5
#: src/translators/librarythingimporter.cpp:155
#, kde-format
msgid "LibraryThing file:"
msgstr ""
#. +> trunk5 stable5
#: src/translators/onixexporter.cpp:67
#, kde-format
msgid "ONIX Archive"
msgstr ""
#. +> trunk5 stable5
#: src/translators/onixexporter.cpp:71
#, kde-format
msgid "Zip Files"
msgstr ""
#. +> trunk5 stable5
#: src/translators/onixexporter.cpp:179
#, kde-format
msgid "ONIX Archive Options"
msgstr ""
#. +> trunk5 stable5
#: src/translators/onixexporter.cpp:182
#, kde-format
msgid "Include images in archive"
msgstr ""
#. +> trunk5 stable5
#: src/translators/onixexporter.cpp:184
#, kde-format
msgid "If checked, the images in the document will be included in the zipped ONIX archive."
msgid "Tellico was unable to read any metadata from the PDF file."
msgstr ""
#. +> trunk5 stable5
#: src/translators/pdfimporter.cpp:269
#, kde-format
msgid "Tellico is able to download information about entries with a DOI from CrossRef.org. However, you must create an CrossRef account and add a new data source with your account information."
msgstr ""
#. +> trunk5 stable5
#: src/translators/risimporter.cpp:335
#, kde-format
msgid "PDF"
msgstr ""
#. +> trunk5 stable5
#: src/translators/tellicoimporter.cpp:185
#, kde-format
msgid "The file is empty."
msgstr ""
#. +> trunk5 stable5
#: src/translators/tellicoimporter.cpp:202
#, kde-format
msgid "The file contains no collection data."
msgstr ""
#. +> trunk5 stable5
#: src/translators/tellicoxmlexporter.cpp:67
#, kde-format
msgid "XML"
msgstr ""
#. +> trunk5 stable5
#: src/translators/tellicoxmlexporter.cpp:518
#, kde-format
msgid "Tellico XML Options"
msgstr ""
#. +> trunk5 stable5
#: src/translators/tellicoxmlexporter.cpp:521
#, kde-format
msgid "Include images in XML document"
msgstr ""
#. +> trunk5 stable5
#: src/translators/tellicoxmlexporter.cpp:523
#, kde-format
msgid "If checked, the images in the document will be included in the XML stream as base64 encoded elements."
msgid "When enabled, this will query transport provider online services for changes such as delays or gate and platform changes."
msgstr ""
#. +> trunk5
#: app/SettingsPage.qml:88
#, kde-format
msgid "Use insecure services"
msgstr ""
#. +> trunk5
#: app/SettingsPage.qml:96
#, kde-format
msgid "Enabling this will also use online services that do not offer transport encryption. This is not recommended, but might be unavoidable when relying on live data from certain providers."
msgid "Showing weather forecasts will query online services."
msgstr ""
#. +> trunk5
#: app/SettingsPage.qml:123
#, kde-format
msgid "Using data from <a href=\"https://www.met.no/\">The Norwegian Meteorological Institute</a> under <a href=\"https://creativecommons.org/licenses/by/4.0\">Creative Commons 4.0 BY International</a> license."
msgstr ""
#. +> trunk5
#: app/SettingsPage.qml:132
#, kde-format
msgid "Transfer Assistant"
msgstr ""
#. +> trunk5
#: app/SettingsPage.qml:136
#, kde-format
msgid "Automatically add transfers"
msgstr ""
#. +> trunk5
#: app/SettingsPage.qml:141
#, kde-format
msgid "Automatically fill transfers"
msgstr ""
#. +> trunk5
#: app/SettingsPage.qml:150
#, kde-format
msgid "When enabled, this will query transport provider online services automatically for transfer information."
+"<p>There's a number of ways to import data into KDE Itinerary:"
+"<ul>"
+msgstr ""
+
+#. +> trunk5
+#: app/WelcomePage.qml:46
+#, kde-format
+msgid "Check the settings!"
+msgstr ""
+
+#. +> trunk5
+#: app/WelcomePage.qml:50
+#, kde-format
+msgid "KDE Itinerary has all features disabled by default that require online access, such as retrieving live traffice data or weather forecasts. You therefore might want to review these settings. While you are at it, you might want to configure your home location to enable the transfer assistant to automatically suggests ways to your next departure station or airport."
+msgstr ""
+
+#. +> trunk5
+#: app/WelcomePage.qml:55
+#, kde-format
+msgid "More information"
+msgstr ""
+
+#. +> trunk5
+#: app/WelcomePage.qml:59
+#, kde-format
+msgid "For more information about KDE Itinerary check out the <a href=\"https://community.kde.org/KDE_PIM/KDE_Itinerary\">wiki page</a>."
msgid "Are you sure you want to remove the registered shortcuts for component '%1'? The component and shortcuts will reregister themselves with their default settings when they are next started."
msgstr ""
#. +> trunk5 stable5 plasma5lts
-#: kglobalshortcutseditor.cpp:451
+#: kglobalshortcutseditor.cpp:450
#, kde-format
msgid "Application Launchers"
msgstr ""
#. +> trunk5 stable5 plasma5lts
-#: kglobalshortcutseditor.cpp:454
+#: kglobalshortcutseditor.cpp:453
#, kde-format
msgid "Other Shortcuts"
msgstr ""
#. +> trunk5 stable5 plasma5lts
-#: kglobalshortcutseditor.cpp:559
+#: kglobalshortcutseditor.cpp:558
#, kde-format
msgid "Your current changes will be lost if you load another scheme before saving this one"
msgstr ""
#. +> trunk5 stable5 plasma5lts
-#: kglobalshortcutseditor.cpp:560
+#: kglobalshortcutseditor.cpp:559
#, kde-format
msgid "Load Shortcut Scheme"
msgstr ""
#. +> trunk5 stable5 plasma5lts
-#: kglobalshortcutseditor.cpp:561
+#: kglobalshortcutseditor.cpp:560
#, kde-format
msgid "Load"
msgstr ""
#. +> trunk5 stable5 plasma5lts
-#: kglobalshortcutseditor.cpp:572
+#: kglobalshortcutseditor.cpp:571
#, kde-format
msgid "This file (%1) does not exist. You can only select local files."
msgid "Hostname on which the application is running"
msgstr ""
#. +> trunk5 stable5 plasma5lts
#: helpers/killer/killer.cpp:54
#, kde-format
msgid "hostname"
msgstr ""
#. +> trunk5 stable5 plasma5lts
#: helpers/killer/killer.cpp:56
#, kde-format
msgid "Caption of the window to be terminated"
msgstr ""
#. +> trunk5 stable5 plasma5lts
#: helpers/killer/killer.cpp:56
#, kde-format
msgid "caption"
msgstr ""
#. +> trunk5 stable5 plasma5lts
#: helpers/killer/killer.cpp:58
#, kde-format
msgid "Name of the application to be terminated"
msgstr ""
#. +> trunk5 stable5 plasma5lts
#: helpers/killer/killer.cpp:58
#, kde-format
msgid "name"
msgstr ""
#. +> trunk5 stable5 plasma5lts
#: helpers/killer/killer.cpp:60
#, kde-format
msgid "ID of resource belonging to the application"
msgstr ""
#. +> trunk5 stable5 plasma5lts
#: helpers/killer/killer.cpp:60
#, kde-format
msgid "id"
msgstr ""
#. +> trunk5 stable5 plasma5lts
#: helpers/killer/killer.cpp:62
#, kde-format
msgid "Time of user action causing termination"
msgstr ""
#. +> trunk5 stable5 plasma5lts
#: helpers/killer/killer.cpp:62
#, kde-format
msgid "time"
msgstr ""
#. +> trunk5 stable5 plasma5lts
#: helpers/killer/killer.cpp:64
#, kde-format
msgid "KWin helper utility"
msgstr ""
#. +> trunk5 stable5 plasma5lts
#: helpers/killer/killer.cpp:88
#, kde-format
msgid "This helper utility is not supposed to be called directly."
msgstr ""
#. +> trunk5 stable5 plasma5lts
#: helpers/killer/killer.cpp:98
#, kde-format
msgctxt "@info"
msgid "<b>Application \"%1\" is not responding</b>"
msgstr ""
#. +> trunk5 stable5 plasma5lts
#: helpers/killer/killer.cpp:100
#, kde-kuit-format
msgctxt "@info"
msgid "<p>You tried to close window \"%1\" from application \"%2\" (Process ID: %3) but the application is not responding.</p>"
msgstr ""
#. +> trunk5 stable5 plasma5lts
#: helpers/killer/killer.cpp:102
#, kde-kuit-format
msgctxt "@info"
msgid "<p>You tried to close window \"%1\" from application \"%2\" (Process ID: %3), running on host \"%4\", but the application is not responding.</p>"
msgstr ""
#. +> trunk5 stable5 plasma5lts
#: helpers/killer/killer.cpp:105
#, kde-kuit-format
msgctxt "@info"
msgid ""
"<p>Do you want to terminate this application?</p>"
"<p><warning>Terminating the application will close all of its child windows. Any unsaved data will be lost.</warning></p>"
msgctxt "Special entry in alt+tab list for minimizing all windows"
msgid "Show Desktop"
msgstr ""
#. +> trunk5 stable5 plasma5lts
#: tabbox/tabbox.cpp:536
#, kde-format
msgid "Walk Through Windows"
msgstr ""
#. +> trunk5 stable5 plasma5lts
#: tabbox/tabbox.cpp:537
#, kde-format
msgid "Walk Through Windows (Reverse)"
msgstr ""
#. +> trunk5 stable5 plasma5lts
#: tabbox/tabbox.cpp:538
#, kde-format
msgid "Walk Through Windows Alternative"
msgstr ""
#. +> trunk5 stable5 plasma5lts
#: tabbox/tabbox.cpp:539
#, kde-format
msgid "Walk Through Windows Alternative (Reverse)"
msgstr ""
#. +> trunk5 stable5 plasma5lts
#: tabbox/tabbox.cpp:540
#, kde-format
msgid "Walk Through Windows of Current Application"
msgstr ""
#. +> trunk5 stable5 plasma5lts
#: tabbox/tabbox.cpp:541
#, kde-format
msgid "Walk Through Windows of Current Application (Reverse)"
msgstr ""
#. +> trunk5 stable5 plasma5lts
#: tabbox/tabbox.cpp:542
#, kde-format
msgid "Walk Through Windows of Current Application Alternative"
msgstr ""
#. +> trunk5 stable5 plasma5lts
#: tabbox/tabbox.cpp:543
#, kde-format
msgid "Walk Through Windows of Current Application Alternative (Reverse)"
msgstr ""
#. +> trunk5 stable5 plasma5lts
#: tabbox/tabbox.cpp:544
#, kde-format
msgid "Walk Through Desktops"
msgstr ""
#. +> trunk5 stable5 plasma5lts
#: tabbox/tabbox.cpp:545
#, kde-format
msgid "Walk Through Desktops (Reverse)"
msgstr ""
#. +> trunk5 stable5 plasma5lts
#: tabbox/tabbox.cpp:546
#, kde-format
msgid "Walk Through Desktop List"
msgstr ""
#. +> trunk5 stable5 plasma5lts
#: tabbox/tabbox.cpp:547
#, kde-format
msgid "Walk Through Desktop List (Reverse)"
msgstr ""
#. +> trunk5 stable5 plasma5lts
#: tabbox/tabboxhandler.cpp:283
#, kde-format
msgid ""
"The Window Switcher installation is broken, resources are missing.\n"
"Contact your distribution about this."
msgstr ""
#. +> trunk5 stable5 plasma5lts
#: useractions.cpp:179
#, kde-format
msgid ""
"You have selected to show a window without its border.\n"
"Without the border, you will not be able to enable the border again using the mouse: use the window operations menu instead, activated using the %1 keyboard shortcut."
msgstr ""
#. +> trunk5 stable5 plasma5lts
#: useractions.cpp:187
#, kde-format
msgid ""
"You have selected to show a window in fullscreen mode.\n"
"If the application itself does not have an option to turn the fullscreen mode off you will not be able to disable it again using the mouse: use the window operations menu instead, activated using the %1 keyboard shortcut."
msgid "Here you can configure your default file manager. The entries in the K menu and all KDE applications in which you can open folders will use this file manager."
msgid "This service allows you to configure your default email client. All KDE applications which need access to an email client application should honor this setting."
msgid "This service allows you to configure your default terminal emulator. All KDE applications which invoke a terminal emulator application should honor this setting."
msgid "This shortcut will activate the applet: it will give the keyboard focus to it, and if the applet has a popup (such as the start menu), the popup will be open."
msgid "Your battery has reached critical level. This notification triggers a countdown before doing the configured action, hence it is strongly advised to leave that on."
msgstr ""
#. +> trunk5 stable5 plasma5lts
#: powerdevil.notifyrc:580
msgctxt "Name"
msgid "Charge Complete"
msgstr ""
#. +> trunk5 stable5 plasma5lts
#: powerdevil.notifyrc:626
msgctxt "Comment"
msgid "The battery is fully charged"
msgstr ""
#. +> trunk5 stable5 plasma5lts
#: powerdevil.notifyrc:678
msgctxt "Name"
msgid "Peripheral Battery Low"
msgstr ""
#. +> trunk5 stable5 plasma5lts
#: powerdevil.notifyrc:720
msgctxt "Comment"
msgid "The battery in a connected device, such as mouse or keyboard, is low"
msgstr ""
#. +> trunk5 stable5 plasma5lts
#: powerdevil.notifyrc:768
msgctxt "Name"
msgid "AC adaptor plugged in"
msgstr ""
#. +> trunk5 stable5 plasma5lts
#: powerdevil.notifyrc:814
msgctxt "Comment"
msgid "The power adaptor has been plugged in"
msgstr ""
#. +> trunk5 stable5 plasma5lts
#: powerdevil.notifyrc:866
msgctxt "Name"
msgid "AC adaptor unplugged"
msgstr ""
#. +> plasma5lts
#: powerdevil.notifyrc:2
msgctxt "Name"
msgid "KDE Power Management System"
msgstr ""
#. +> plasma5lts
#: powerdevil.notifyrc:959
msgctxt "Name"
msgid "Internal Error"
msgstr ""
#. +> trunk5 stable5 plasma5lts
#: powerdevil.notifyrc:912
msgctxt "Comment"
msgid "The power adaptor has been unplugged"
msgstr ""
#. +> plasma5lts
#: powerdevil.notifyrc:1005
msgctxt "Comment"
msgid "The KDE Power Management System has triggered an internal error"
msgid "<b>Julia</b> is a high-level, high-performance dynamic programming language for technical computing, with syntax that is familiar to users of other technical computing environments. It provides a sophisticated compiler, distributed parallel execution, numerical accuracy, and an extensive mathematical function library."
msgstr ""
#. +> trunk5 stable5
#: backends/julia/juliabackend.cpp:85
#, kde-format
msgctxt "The url to the documentation of Julia, please check if there is a translated version and use the correct url"
msgid "https://docs.julialang.org/en/latest/"
msgstr ""
#. +> trunk5 stable5
#: backends/julia/juliabackend.cpp:101
#, kde-format
msgid "The path to Julia specified in the application settings must point directly to the executable. Symlinks are not allowed. Please provide the correct path in the application settings and try again."
msgid "Сantor couldn’t determine the version of Julia for %1. Please specify the correct path to Julia executable (no symlinks allowed) and try again."
msgstr ""
#. +> trunk5 stable5
#: backends/julia/juliabackend.cpp:141
#, kde-format
msgid "You are trying to use Cantor with Julia v%1.%2.%3. This version of Cantor was compiled with the support of Julia v%4.%5.%6. Please point to this version of Julia or recompile Cantor using the version %1.%2.%3."
msgstr ""
#. i18n: ectx: label, entry (replPath), group (JuliaBackend)
msgid "<b>Lua</b> is a fast and lightweight scripting language, with a simple procedural syntax. There are several libraries in Lua aimed at math and science."
msgstr ""
#. i18n: ectx: label, entry (Path), group (LuaBackend)
msgid "<b>Maxima</b> is a system for the manipulation of symbolic and numerical expressions, including differentiation, integration, Taylor series, Laplace transforms, ordinary differential equations, systems of linear equations, polynomials, and sets, lists, vectors, matrices, and tensors. Maxima yields high precision numeric results by using exact fractions, arbitrary precision integers, and variable precision floating point numbers. Maxima can plot functions and data in two and three dimensions."
msgstr ""
#. i18n: ectx: label, entry (Path), group (MaximaBackend)
#. +> trunk5 stable5
#: backends/maxima/maximabackend.kcfg:10
#, kde-format
msgid "Path to the Maxima executable"
msgstr ""
#. i18n: ectx: label, entry (localDoc), group (MaximaBackend)
#. +> trunk5 stable5
#: backends/maxima/maximabackend.kcfg:14
#, kde-format
msgid "Url to the local Maxima documentation"
msgstr ""
#. +> trunk5 stable5
#: backends/maxima/maximaexpression.cpp:118
#, kde-format
msgid "Error: Too many */"
msgstr ""
#. +> trunk5 stable5
#: backends/maxima/maximaexpression.cpp:131
#, kde-format
msgid "Error: Too many /*"
msgstr ""
#. +> trunk5 stable5
#: backends/maxima/maximaexpression.cpp:137
#, kde-format
msgid "Error: expected \" before ;"
msgstr ""
#. +> trunk5 stable5
#: backends/maxima/maximaexpression.cpp:358
#, kde-format
msgid "Waiting for the plot result"
msgstr ""
#. +> trunk5 stable5
#: backends/maxima/maximaextensions.cpp:46
#, kde-format
msgid "Maxima batch file (*.mac)"
msgstr ""
#. +> trunk5 stable5
#: backends/maxima/maximasession.cpp:188
#, kde-format
msgid "Failed to start Maxima"
msgstr ""
#. +> trunk5 stable5
-#: backends/maxima/maximasession.cpp:276
+#: backends/maxima/maximasession.cpp:275
#, kde-format
msgid "Maxima crashed. restarting..."
msgstr ""
#. +> trunk5 stable5
-#: backends/maxima/maximasession.cpp:290
+#: backends/maxima/maximasession.cpp:289
#, kde-format
msgid "Maxima crashed twice within a short time. Stopping to try starting"
msgctxt "the url to the documentation of Octave, please check if there is a translated version (currently Czech and Japanese) and use the correct url"
msgid "https://octave.org/doc/interpreter/"
msgstr ""
#. +> trunk5 stable5
#: backends/octave/octavebackend.cpp:82
#, kde-format
msgid ""
"<b>GNU Octave</b> is a high-level language, primarily intended for numerical computations. <br/>"
"It provides a convenient command line interface for solving linear and nonlinear problems numerically, and for performing other numerical experiments using a language that is mostly compatible with Matlab."
msgstr ""
#. i18n: ectx: label, entry (Path), group (OctaveBackend)
#. +> trunk5 stable5
#: backends/octave/octavebackend.kcfg:10
#, kde-format
msgid "Path to the Octave executable"
msgstr ""
#. i18n: ectx: label, entry (localDoc), group (SageBackend)
#. i18n: ectx: label, entry (localDoc), group (OctaveBackend)
msgid "<b>Python</b> is a remarkably powerful dynamic programming language that is used in a wide variety of application domains. There are several Python packages to scientific programming."
msgstr ""
#. i18n: ectx: label, entry (pythonServerPath), group (PythonBackend)
#. +> trunk5
#: backends/python/pythonbackend.kcfg:10
#, kde-format
msgid "Path to Cantor python server executable"
msgstr ""
#. i18n: ectx: label, entry (localDoc), group (PythonBackend)
#. +> trunk5 stable5
#: backends/python/pythonbackend.kcfg:14
#, kde-format
msgid "Url to the local Python documentation"
msgstr ""
#. +> trunk5 stable5
#: backends/python/pythonextensions.cpp:184
#, kde-format
msgid "Python script file (*.py)"
msgstr ""
#. +> trunk5 stable5
#: backends/python/pythonsession.cpp:262
#, kde-format
msgid "Cantor Python server stopped working."
msgstr ""
#. +> trunk5 stable5
#: backends/python/pythonsession.cpp:266
#, kde-format
msgid "Failed to start Cantor python server."
msgstr ""
#. +> trunk5 stable5
#: backends/python/pythonsession.cpp:270
#, kde-format
msgid "Communication with Cantor python server failed for unknown reasons."
msgid "<b>Qalculate!</b> is not your regular software replication of the cheapest available calculator. Qalculate! aims to make full use of the superior interface, power and flexibility of modern computers. The center of attention in Qalculate! is the expression entry. Instead of entering each number in a mathematical expression separately, you can directly write the whole expression and later modify it. The interpretation of expressions is flexible and fault tolerant, and if you nevertheless do something wrong, Qalculate! will tell you so. Not fully solvable expressions are however not errors. Qalculate! will simplify as far as it can and answer with an expression. In addition to numbers and arithmetic operators, an expression may contain any combination of variables, units, and functions."
msgstr ""
#. i18n: ectx: label, entry (postConversion), group (QalculateBackend)
#. +> trunk5 stable5
#: backends/qalculate/qalculatebackend.kcfg:9
#, kde-format
msgid "If and how units will be automatically converted. If true, convert to the best suited SI units (the least amount of units)."
msgstr ""
#. i18n: ectx: label, entry (angleUnit), group (QalculateBackend)
#. +> trunk5 stable5
#: backends/qalculate/qalculatebackend.kcfg:13
#, kde-format
msgid "Default angle unit for trigonometric functions."
msgstr ""
#. i18n: ectx: label, entry (base), group (QalculateBackend)
#. +> trunk5 stable5
#: backends/qalculate/qalculatebackend.kcfg:23
#, kde-format
msgid "Base of parsed and evaluated numbers."
msgstr ""
#. i18n: ectx: label, entry (structuring), group (QalculateBackend)
#. +> trunk5 stable5
#: backends/qalculate/qalculatebackend.kcfg:32
#, kde-format
msgid "If the evaluation result will be simplified or factorized."
msgstr ""
#. i18n: ectx: label, entry (fractionFormat), group (QalculateBackend)
#. +> trunk5 stable5
#: backends/qalculate/qalculatebackend.kcfg:42
#, kde-format
msgid "If rational numbers will be displayed with decimals, as a fraction, or something in between."
msgstr ""
#. i18n: ectx: label, entry (indicateInfiniteSeries), group (QalculateBackend)
#. +> trunk5 stable5
#: backends/qalculate/qalculatebackend.kcfg:46
#, kde-format
msgid "Show that the digit series of a number continues forever with three dots, instead of rounding (ex. 2/3 displays as 0.666666... instead of 0.666667)."
msgstr ""
#. i18n: ectx: label, entry (useAllPrefixes), group (QalculateBackend)
#. +> trunk5 stable5
#: backends/qalculate/qalculatebackend.kcfg:50
#, kde-format
msgid "Use all decimal SI prefixes. If false, prefixes which is not a multiple of thousand (centi, deci, deca, hecto) will not be used automatically."
msgstr ""
#. i18n: ectx: label, entry (negativeExponents), group (QalculateBackend)
#. +> trunk5 stable5
#: backends/qalculate/qalculatebackend.kcfg:54
#, kde-format
msgid "If true, negative exponents will be used instead of division (ex. 5/x^2 becomes 5*x^-2)."
msgstr ""
#. i18n: ectx: label, entry (minExp), group (QalculateBackend)
#. +> trunk5 stable5
#: backends/qalculate/qalculatebackend.kcfg:64
#, kde-format
msgid "Numerical display."
msgstr ""
#. i18n: ectx: label, entry (inlinePlot), group (QalculateBackend)
#. +> trunk5 stable5
#: backends/qalculate/qalculatebackend.kcfg:68
#, kde-format
msgid "If true, plots will be displayed inside the worksheet. If not they appear in a separate window."
msgstr ""
#. i18n: ectx: label, entry (coloredPlot), group (QalculateBackend)
#. +> trunk5 stable5
#: backends/qalculate/qalculatebackend.kcfg:72
#, kde-format
msgid "Whether colors should be used in plots."
msgstr ""
#. i18n: ectx: label, entry (plotGrid), group (QalculateBackend)
#. +> trunk5 stable5
#: backends/qalculate/qalculatebackend.kcfg:76
#, kde-format
msgid "Whether a grid should be plotted."
msgstr ""
#. i18n: ectx: label, entry (plotBorder), group (QalculateBackend)
#. +> trunk5 stable5
#: backends/qalculate/qalculatebackend.kcfg:80
#, kde-format
msgid "Whether full borders should be drawn around the plot."
msgstr ""
#. i18n: ectx: label, entry (plotLineWidth), group (QalculateBackend)
#. +> trunk5 stable5
#: backends/qalculate/qalculatebackend.kcfg:84
#, kde-format
msgid "Width of lines, in pixels."
msgstr ""
#. i18n: ectx: label, entry (plotSteps), group (QalculateBackend)
#. +> trunk5 stable5
#: backends/qalculate/qalculatebackend.kcfg:88
#, kde-format
msgid "Number of interpolation steps to be used in plotting."
msgstr ""
#. i18n: ectx: label, entry (plotSmoothing), group (QalculateBackend)
#. +> trunk5 stable5
#: backends/qalculate/qalculatebackend.kcfg:99
#, kde-format
msgid "Smoothing mode in plots."
msgstr ""
#. i18n: ectx: label, entry (plotStyle), group (QalculateBackend)
#. +> trunk5 stable5
#: backends/qalculate/qalculatebackend.kcfg:113
#, kde-format
msgid "Style of plots."
msgstr ""
#. i18n: ectx: label, entry (plotLegend), group (QalculateBackend)
#. +> trunk5 stable5
#: backends/qalculate/qalculatebackend.kcfg:126
#, kde-format
msgid "Legend position in plots."
msgstr ""
#. +> trunk5 stable5
#: backends/qalculate/qalculateexpression.cpp:157
#, kde-format
msgid "Qalculate reports it cannot print. Is gnuplot installed?"
msgstr ""
#. +> trunk5 stable5
#: backends/qalculate/qalculateexpression.cpp:178
#, kde-format
msgid "missing %1"
msgstr ""
#. +> trunk5 stable5
#: backends/qalculate/qalculateexpression.cpp:268
#, kde-format
msgid "%1 must be a number."
msgstr ""
#. +> trunk5 stable5
#: backends/qalculate/qalculateexpression.cpp:269
#, kde-format
msgid "%1 must be a integer."
msgstr ""
#. +> trunk5 stable5
#: backends/qalculate/qalculateexpression.cpp:270
#, kde-format
msgid "%1 must be a boolean."
msgstr ""
#. +> trunk5 stable5
#: backends/qalculate/qalculateexpression.cpp:271
#, kde-format
msgid "invalid option for %1: %2"
msgstr ""
#. +> trunk5 stable5
#: backends/qalculate/qalculateexpression.cpp:598
#, kde-format
msgid "found multiple expressions in one plot command (%1 and %2)."
msgctxt "the url to the documentation of R, please check if there is a translated version and use the correct url"
msgid "https://cran.r-project.org/manuals.html"
msgstr ""
#. +> trunk5 stable5
#: backends/R/rbackend.cpp:99
#, kde-format
msgid ""
"<b>R</b> is a language and environment for statistical computing and graphics, similar to the S language and environment. <br/>"
"It provides a wide variety of statistical (linear and nonlinear modelling, classical statistical tests, time-series analysis, classification, clustering, ...) and graphical techniques, and is highly extensible. The S language is often the vehicle of choice for research in statistical methodology, and R provides an Open Source route to participation in that activity."
msgid "<b>Scilab</b> is a free software, cross-platform numerical computational package and a high-level, numerically oriented programming language.Scilab is distributed under CeCILL license (GPL compatible)."
msgstr ""
#. i18n: ectx: label, entry (Path), group (ScilabBackend)
#. +> trunk5 stable5
#: backends/scilab/scilabbackend.kcfg:10
#, kde-format
msgid "Path to scilab-adv-cli command (Warning: Scilab version must better or equal than 5.4 version)"
msgstr ""
#. +> trunk5 stable5
#: backends/scilab/scilabextensions.cpp:38
#, kde-format
msgid ";;Scilab script file (*.sce);;Scilab function file (*.sci)"
msgid "<b>Python</b> is a remarkably powerful dynamic programming language that is used in a wide variety of application domains. There are several Python packages to scientific programming. This backend supports Python 2."
msgstr ""
#. +> stable5
#: backends/python3/python3backend.cpp:70
#, kde-format
msgctxt "The url to the documentation Python 3"
msgid "https://docs.python.org/3/"
msgstr ""
#. +> stable5
#: backends/python3/python3backend.cpp:75
#, kde-format
msgid "<b>Python</b> is a remarkably powerful dynamic programming language that is used in a wide variety of application domains. There are several Python packages to scientific programming. This backend supports Python 3."
msgid "<b>Note</b>: the information here is used only for annotations. The information is saved in annotated documents, and so will be transmitted together with the document."
msgid "Keeps used memory as low as possible. Do not reuse anything. (For systems with low memory.)"
msgstr ""
#. +> trunk5 stable5
#: conf/dlgperformance.cpp:56
#, kde-format
msgid "A good compromise between memory usage and speed gain. Preload next page and boost searches. (For systems with 2GB of memory, typically.)"
msgstr ""
#. +> trunk5 stable5
#: conf/dlgperformance.cpp:59
#, kde-format
msgid "Keeps everything in memory. Preload next pages. Boost searches. (For systems with more than 4GB of memory.)"
msgstr ""
#. +> trunk5 stable5
#: conf/dlgperformance.cpp:63
#, kde-format, no-c-format
msgid "Loads and keeps everything in memory. Preload all pages. (Will use at maximum 50% of your total memory or your free memory, whatever is bigger.)"
"<qt>More than one backend found for the MIME type:<br />"
"<b>%1</b> (%2).<br />"
"<br />"
"Please select which one to use:</qt>"
msgstr ""
#. +> trunk5 stable5
#: core/document.cpp:182
#, kde-format
msgctxt "paper type and orientation (eg: Portrait A4)"
msgid "Portrait %1"
msgstr ""
#. +> trunk5 stable5
#: core/document.cpp:184
#, kde-format
msgctxt "paper type and orientation (eg: Portrait A4)"
msgid "Landscape %1"
msgstr ""
#. +> trunk5 stable5
#: core/document.cpp:211
#, kde-format
msgctxt "%1 is width, %2 is height, %3 is paper size name"
msgid "%1 x %2 in (%3)"
msgstr ""
#. +> trunk5 stable5
#: core/document.cpp:215
#, kde-format
msgctxt "%1 is width, %2 is height, %3 is paper size name"
msgid "%1 x %2 mm (%3)"
msgstr ""
#. +> trunk5 stable5
#: core/document.cpp:1746
#, kde-format
msgid "Continuing search from beginning"
msgstr ""
#. +> trunk5 stable5
#: core/document.cpp:1751
#, kde-format
msgid "Continuing search from bottom"
msgstr ""
#. +> trunk5 stable5
#: core/document.cpp:2565
#, kde-format
msgid "Can not find a plugin which is able to handle the document being passed."
msgstr ""
#. +> trunk5 stable5
#: core/document.cpp:3697
#, kde-format
msgctxt "remove a collection of annotations from the page"
msgid "remove annotations"
msgstr ""
#. +> trunk5 stable5
#: core/document.cpp:4276 core/document.cpp:4284
#, kde-format
msgid "The document is trying to execute an external application and, for your safety, Okular does not allow that."
msgstr ""
#. +> trunk5 stable5
#: core/document.cpp:4297
#, kde-format
msgid "No application found for opening file of mimetype %1."
msgstr ""
#. +> trunk5 stable5
#: core/document.cpp:4671
#, kde-format
msgid "Could not open a temporary file"
msgstr ""
#. +> trunk5 stable5
#: core/document.cpp:4673
#, kde-format
msgid "Print conversion failed"
msgstr ""
#. +> trunk5 stable5
#: core/document.cpp:4675
#, kde-format
msgid "Printing process crashed"
msgstr ""
#. +> trunk5 stable5
#: core/document.cpp:4677
#, kde-format
msgid "Printing process could not start"
msgstr ""
#. +> trunk5 stable5
#: core/document.cpp:4679
#, kde-format
msgid "Printing to file failed"
msgstr ""
#. +> trunk5 stable5
#: core/document.cpp:4681
#, kde-format
msgid "Printer was in invalid state"
msgstr ""
#. +> trunk5 stable5
#: core/document.cpp:4683
#, kde-format
msgid "Unable to find file to print"
msgstr ""
#. +> trunk5 stable5
#: core/document.cpp:4685
#, kde-format
msgid "There was no file to print"
msgstr ""
#. +> trunk5 stable5
#: core/document.cpp:4687
#, kde-format
msgid "Could not find a suitable binary for printing. Make sure CUPS lpr binary is available"
msgstr ""
#. +> trunk5 stable5
#: core/document.cpp:4689
#, kde-format
msgid "The page print size is invalid"
msgstr ""
#. +> trunk5 stable5
#: core/document.cpp:5354 part.cpp:1114
#, kde-format
msgid "Could not open '%1'. File does not exist"
msgstr ""
#. +> trunk5 stable5
#: core/document.cpp:5842
#, kde-format
msgid "Title"
msgstr ""
#. +> trunk5 stable5
#: core/document.cpp:5845
#, kde-format
msgid "Subject"
msgstr ""
#. +> trunk5 stable5
#: core/document.cpp:5848
#, kde-format
msgid "Description"
msgstr ""
#. +> trunk5 stable5
#: core/document.cpp:5851
#, kde-format
msgid "Author"
msgstr ""
#. +> trunk5 stable5
#: core/document.cpp:5854
#, kde-format
msgid "Creator"
msgstr ""
#. +> trunk5 stable5
#: core/document.cpp:5857
#, kde-format
msgid "Producer"
msgstr ""
#. +> trunk5 stable5
#: core/document.cpp:5860
#, kde-format
msgid "Copyright"
msgstr ""
#. +> trunk5 stable5
#: core/document.cpp:5863
#, kde-format
msgid "Pages"
msgstr ""
#. +> trunk5 stable5
#: core/document.cpp:5866
#, kde-format
msgid "Created"
msgstr ""
#. +> trunk5 stable5
#: core/document.cpp:5869
#, kde-format
msgid "Modified"
msgstr ""
#. +> trunk5 stable5
#: core/document.cpp:5872
#, kde-format
msgid "Mime Type"
msgstr ""
#. +> trunk5 stable5
#: core/document.cpp:5875
#, kde-format
msgid "Category"
msgstr ""
#. +> trunk5 stable5
#: core/document.cpp:5878
#, kde-format
msgid "Keywords"
msgstr ""
#. +> trunk5 stable5
#: core/document.cpp:5881
#, kde-format
msgid "File Path"
msgstr ""
#. +> trunk5 stable5
#: core/document.cpp:5884
#, kde-format
msgid "File Size"
msgstr ""
#. +> trunk5 stable5
#: core/document.cpp:5887
#, kde-format
msgid "Page Size"
msgstr ""
#. +> trunk5 stable5
#: core/documentcommands.cpp:69
#, kde-format
msgctxt "Add an annotation to the page"
msgid "add annotation"
msgstr ""
#. +> trunk5 stable5
#: core/documentcommands.cpp:116
#, kde-format
msgctxt "Remove an annotation from the page"
msgid "remove annotation"
msgstr ""
#. +> trunk5 stable5
#: core/documentcommands.cpp:167
#, kde-format
msgctxt "Modify an annotation's internal properties (Color, line-width, etc.)"
msgid "modify annotation properties"
msgstr ""
#. +> trunk5 stable5
#: core/documentcommands.cpp:205
#, kde-format
msgctxt "Translate an annotation's position on the page"
msgid "translate annotation"
msgstr ""
#. +> trunk5 stable5
#: core/documentcommands.cpp:282
#, kde-format
msgctxt "Change an annotation's size"
msgid "adjust annotation"
msgstr ""
#. +> trunk5 stable5
#: core/documentcommands.cpp:355
#, kde-format
msgctxt "Generic text edit command"
msgid "edit text"
msgstr ""
#. +> trunk5 stable5
#: core/documentcommands.cpp:444
#, kde-format
msgctxt "Edit an annotation's text contents"
msgid "edit annotation contents"
msgstr ""
#. +> trunk5 stable5
#: core/documentcommands.cpp:502
#, kde-format
msgctxt "Edit an form's text contents"
msgid "edit form contents"
msgstr ""
#. +> trunk5 stable5
#: core/documentcommands.cpp:559
#, kde-format
msgctxt "Edit a list form's choices"
msgid "edit list form choices"
msgstr ""
#. +> trunk5 stable5
#: core/documentcommands.cpp:601
#, kde-format
msgctxt "Edit a combo form's selection"
msgid "edit combo form selection"
msgstr ""
#. +> trunk5 stable5
#: core/documentcommands.cpp:690
#, kde-format
msgctxt "Edit the state of a group of form buttons"
msgid "edit form button states"
msgstr ""
#. +> trunk5 stable5
#: core/generator.cpp:762
#, kde-format
msgid "Plain &Text..."
msgstr ""
#. +> trunk5 stable5
#: core/generator.cpp:765
#, kde-format
msgid "PDF"
msgstr ""
#. +> trunk5 stable5
#: core/generator.cpp:770
#, kde-format
msgctxt "This is the document format"
msgid "OpenDocument Text"
msgstr ""
#. +> trunk5 stable5
#: core/generator.cpp:774
#, kde-format
msgctxt "This is the document format"
msgid "HTML"
msgstr ""
#. +> trunk5 stable5
#: core/printoptionswidget.cpp:22
#, kde-format
msgid "Print Options"
msgstr ""
#. +> trunk5 stable5
#: core/printoptionswidget.cpp:26
#, kde-format
msgid "Fit to printable area"
msgstr ""
#. +> trunk5 stable5
#: core/printoptionswidget.cpp:27
#, kde-format
msgid "Fit to full page"
msgstr ""
#. +> trunk5 stable5
#: core/printoptionswidget.cpp:28
#, kde-format
msgid "Scale mode:"
msgstr ""
#. +> trunk5 stable5
#: core/script/kjs_app.cpp:172
#, kde-format
msgid "Missing alert type"
msgstr ""
#. +> trunk5 stable5
#: core/script/kjs_app.cpp:227
#, kde-format
msgid "Do not show this message again"
msgstr ""
#. +> trunk5 stable5
#: core/sourcereference.cpp:102
#, kde-format
msgctxt "'source' is a source file"
msgid "Source: %1"
msgstr ""
#. +> trunk5 stable5
#: core/textdocumentsettings.cpp:40
#, kde-format
msgid "&Default Font:"
msgstr ""
#. i18n: ectx: Menu (file)
#. +> trunk5 stable5
#: part-viewermode.rc:5 part.rc:4
#, kde-format
msgid "&File"
msgstr ""
#. i18n: ectx: Menu (settings)
#. +> trunk5 stable5
#: part-viewermode.rc:9 part.rc:89
#, kde-format
msgid "&Settings"
msgstr ""
#. i18n: ectx: Menu (help)
#. +> trunk5 stable5
#: part-viewermode.rc:14 part.rc:95
#, kde-format
msgid "&Help"
msgstr ""
#. i18n: ectx: Menu (view_orientation)
#. +> trunk5 stable5
#: part-viewermode.rc:32 part.rc:44
#, kde-format
msgid "&Orientation"
msgstr ""
#. i18n: ectx: Menu (bookmarks)
#. i18n: ectx: Menu (okular_bookmarks)
#. +> trunk5 stable5
#: part-viewermode.rc:51 part.rc:66
#, kde-format
msgid "&Bookmarks"
msgstr ""
#. i18n: ectx: ToolBar (OkularViewerToolBar)
#. +> trunk5 stable5
#: part-viewermode.rc:64
#, kde-format
msgid "Viewer Toolbar"
msgstr ""
#. +> trunk5 stable5
#: part.cpp:425
#, kde-format
msgid "Contents"
msgstr ""
#. +> trunk5 stable5
#: part.cpp:431
#, kde-format
msgid "Layers"
msgstr ""
#. +> trunk5 stable5
#: part.cpp:443
#, kde-format
msgid "Thumbnails"
msgstr ""
#. +> trunk5 stable5
#: part.cpp:449
#, kde-format
msgid "Reviews"
msgstr ""
#. +> trunk5 stable5
#: part.cpp:454
#, kde-format
msgid "Bookmarks"
msgstr ""
#. +> trunk5 stable5
#: part.cpp:460
#, kde-format
msgid "Signatures"
msgstr ""
#. +> trunk5 stable5
#: part.cpp:494
#, kde-format
msgid ""
"This document contains annotations or form data that were saved internally by a previous Okular version. Internal storage is <b>no longer supported</b>.<br/>"
"Please save to a file in order to move them if you want to continue to edit the document."
msgstr ""
#. +> trunk5 stable5
#: part.cpp:500
#, kde-format
msgid "This document has embedded files. <a href=\"okular:/embeddedfiles\">Click here to see them</a> or go to File -> Embedded Files."
msgstr ""
#. +> trunk5 stable5
#: part.cpp:667
#, kde-format
msgctxt "Previous page"
msgid "Previous"
msgstr ""
#. +> trunk5 stable5
#: part.cpp:668
#, kde-format
msgid "Go back to the Previous Page"
msgstr ""
#. +> trunk5 stable5
#: part.cpp:669
#, kde-format
msgid "Moves to the previous page of the document"
msgid "The program \"ps2pdf\" was not found, so Okular can not import PS files using it."
msgstr ""
#. +> trunk5 stable5
#: part.cpp:1317
#, kde-format
msgid "ps2pdf not found"
msgstr ""
#. +> trunk5 stable5
#: part.cpp:1322
#, kde-format
msgid "PostScript files (%1)"
msgstr ""
#. +> trunk5 stable5
#: part.cpp:1338
#, kde-format
msgid "Importing PS file as PDF (this may take a while)..."
msgstr ""
#. +> trunk5 stable5
#: part.cpp:1477
#, kde-format
msgid "Please enter the password to read the document:"
msgstr ""
#. +> trunk5 stable5
#: part.cpp:1479
#, kde-format
msgid "Incorrect password. Try again:"
msgstr ""
#. +> trunk5 stable5
#: part.cpp:1484
#, kde-format
msgid "Document Password"
msgstr ""
#. +> trunk5 stable5
#: part.cpp:1596
#, kde-format
msgid "This document has XFA forms, which are currently <b>unsupported</b>."
msgstr ""
#. +> trunk5 stable5
#: part.cpp:1604
#, kde-format
msgid "This document has forms. Click on the button to interact with them, or use View -> Show Forms."
msgstr ""
#. +> trunk5 stable5
#: part.cpp:1617
#, kde-format
msgid "All editing and interactive features for this document are disabled. Please save a copy and reopen to edit this document."
msgstr ""
#. +> trunk5 stable5
#: part.cpp:1621
#, kde-format
msgid "This document is digitally signed."
msgstr ""
#. +> trunk5 stable5
#: part.cpp:1705
#, kde-format
msgid ""
"This document wants to be shown full screen.\n"
"Leave normal mode and enter presentation mode?"
msgstr ""
#. +> trunk5 stable5
#: part.cpp:1707
#, kde-format
msgid "Request to Change Viewing Mode"
msgstr ""
#. +> trunk5 stable5
#: part.cpp:1708
#, kde-format
msgid "Enter Presentation Mode"
msgstr ""
#. +> trunk5 stable5
#: part.cpp:1709
#, kde-format
msgid "Deny Request"
msgstr ""
#. +> trunk5
#: part.cpp:1789
#, kde-format
msgid "Could not open %1. %2"
msgstr ""
#. +> stable5
#: part.cpp:1789
#, kde-format
msgid "Could not open %1"
msgstr ""
#. +> trunk5 stable5
#: part.cpp:1810
#, kde-format
msgid ""
"There are unsaved changes, and the file '%1' has been modified by another program. Your changes will be lost, because the file can no longer be saved.<br>"
"Do you want to continue reloading the file?"
msgstr ""
#. +> trunk5 stable5
#: part.cpp:1811 part.cpp:1819 part.cpp:2600
#, kde-format
msgid "File Changed"
msgstr ""
#. +> trunk5 stable5
#: part.cpp:1812
#, kde-format
msgid "Continue Reloading"
msgstr ""
#. +> trunk5 stable5
#: part.cpp:1813
#, kde-format
msgid "Abort Reloading"
msgstr ""
#. +> trunk5 stable5
#: part.cpp:1818
#, kde-format
msgid ""
"There are unsaved changes, and the file '%1' has been modified by another program. Your changes will be lost, because the file can no longer be saved.<br>"
"Do you want to continue closing the file?"
msgstr ""
#. +> trunk5 stable5
#: part.cpp:1820
#, kde-format
msgid "Continue Closing"
msgstr ""
#. +> trunk5 stable5
#: part.cpp:1821
#, kde-format
msgid "Abort Closing"
msgstr ""
#. +> trunk5 stable5
#: part.cpp:1827
#, kde-format
msgid "Do you want to save your changes to \"%1\" or discard them?"
msgstr ""
#. +> trunk5 stable5
#: part.cpp:1828
#, kde-format
msgid "Close Document"
msgstr ""
#. +> trunk5 stable5
#: part.cpp:1947
#, kde-format
msgid "This link points to a close document action that does not work when using the embedded viewer."
msgstr ""
#. +> trunk5 stable5
#: part.cpp:1953
#, kde-format
msgid "This link points to a quit application action that does not work when using the embedded viewer."
msgid "File could not be saved in '%1'. Try to save it to another location."
msgstr ""
#. +> trunk5 stable5
#: part.cpp:2675
#, kde-format
msgid "Filled form contents"
msgstr ""
#. +> trunk5 stable5
#: part.cpp:2676
#, kde-format
msgid "User annotations"
msgstr ""
#. +> trunk5 stable5
#: part.cpp:2682
#, kde-format
msgid "You are about to save changes, but the current file format does not support saving the following elements. Please use the <i>Okular document archive</i> format to preserve them."
msgstr ""
#. +> trunk5 stable5
#: part.cpp:2685 part.cpp:2708
#, kde-format
msgid "Warning"
msgstr ""
#. +> trunk5 stable5
#: part.cpp:2686 part.cpp:2709
#, kde-format
msgid "Save as Okular document archive..."
msgstr ""
#. +> trunk5 stable5
#: part.cpp:2701
#, kde-format
msgid "You are about to save changes, but the current file format does not support saving the following elements. Please use the <i>Okular document archive</i> format to preserve them. Click <i>Continue</i> to save the document and discard these elements."
msgstr ""
#. +> trunk5 stable5
#: part.cpp:2702
#, kde-format
msgid "You are about to save changes, but the current file format does not support saving the following elements. Please use the <i>Okular document archive</i> format to preserve them. Click <i>Continue</i> to save, but you will lose these elements as well as the undo/redo history."
msgstr ""
#. +> trunk5 stable5
#: part.cpp:2704
#, kde-format
msgid "Continue"
msgstr ""
#. +> trunk5 stable5
#: part.cpp:2705
#, kde-format
msgid "Continue losing changes"
msgstr ""
#. +> trunk5 stable5
#: part.cpp:2735
#, kde-format
msgid "File could not be saved in '%1'. %2"
msgstr ""
#. +> trunk5 stable5
#: part.cpp:2779
#, kde-format
msgid ""
"Okular cannot copy %1 to the specified location.\n"
"\n"
"The document does not exist anymore."
msgstr ""
#. +> trunk5 stable5
#: part.cpp:2813
#, kde-format
msgid "File could not be saved in '%1'. Error: '%2'. Try to save it to another location."
msgstr ""
#. +> trunk5 stable5
#: part.cpp:3094
#, kde-format
msgid "Expand whole section"
msgstr ""
#. +> trunk5 stable5
#: part.cpp:3096
#, kde-format
msgid "Collapse whole section"
msgstr ""
#. +> trunk5 stable5
#: part.cpp:3098
#, kde-format
msgid "Expand all"
msgstr ""
#. +> trunk5 stable5
#: part.cpp:3100
#, kde-format
msgid "Collapse all"
msgstr ""
#. +> trunk5 stable5
#: part.cpp:3110 ui/annotationmodel.cpp:335
#, kde-format
msgid "Page %1"
msgstr ""
#. +> trunk5 stable5
#: part.cpp:3115
#, kde-format
msgid "Add Bookmark"
msgstr ""
#. +> trunk5 stable5
#: part.cpp:3125
#, kde-format
msgid "Tools"
msgstr ""
#. +> trunk5 stable5
#: part.cpp:3337
#, kde-format
msgctxt "@title:window"
msgid "Print"
msgstr ""
#. +> trunk5 stable5
#: part.cpp:3414
#, kde-format
msgid "Printing this document is not allowed."
msgstr ""
#. +> trunk5 stable5
#: part.cpp:3423
#, kde-format
msgid "Could not print the document. Unknown error. Please report to bugs.kde.org"
msgstr ""
#. +> trunk5 stable5
#: part.cpp:3427
#, kde-format
msgid "Could not print the document. Detailed error is \"%1\". Please report to bugs.kde.org"
msgstr ""
#. +> trunk5 stable5
#: part.cpp:3514
#, kde-format
msgid "Go to the place you were before"
msgstr ""
#. +> trunk5 stable5
#: part.cpp:3518
#, kde-format
msgid "Go to the place you were after"
msgstr ""
#. +> trunk5 stable5
#: part.cpp:3545
#, kde-format
msgid "<qt><strong>File Error!</strong> Could not create temporary file <nobr><strong>%1</strong></nobr>.</qt>"
msgstr ""
#. +> trunk5 stable5
#: part.cpp:3558
#, kde-format
msgid "<qt><strong>File Error!</strong> Could not open the file <nobr><strong>%1</strong></nobr> for uncompression. The file will not be loaded.</qt>"
msgstr ""
#. +> trunk5 stable5
#: part.cpp:3561
#, kde-format
msgid "<qt>This error typically occurs if you do not have enough permissions to read the file. You can check ownership and permissions if you right-click on the file in the Dolphin file manager, then choose the 'Properties' option, and select 'Permissions' tab in the opened window.</qt>"
msgstr ""
#. +> trunk5 stable5
#: part.cpp:3585
#, kde-format
msgid "<qt><strong>File Error!</strong> Could not uncompress the file <nobr><strong>%1</strong></nobr>. The file will not be loaded.</qt>"
msgstr ""
#. +> trunk5 stable5
#: part.cpp:3588
#, kde-format
msgid "<qt>This error typically occurs if the file is corrupt. If you want to be sure, try to decompress the file manually using command-line tools.</qt>"
msgstr ""
#. +> trunk5 stable5
#: part.cpp:3617
#, kde-format
msgid "No Bookmarks"
msgstr ""
#. +> trunk5 stable5
#: part.cpp:3691
#, kde-format
msgid "There was a problem sharing the document: %1"
msgstr ""
#. +> trunk5 stable5
#: part.cpp:3692 part.cpp:3699
#, kde-format
msgid "Share"
msgstr ""
#. +> trunk5 stable5
#: part.cpp:3696
#, kde-format
msgid "Document shared successfully"
msgstr ""
#. +> trunk5 stable5
#: part.cpp:3698
#, kde-format
msgid "You can find the shared document at: <a href=\"%1\">%1</a>"
msgstr ""
#. i18n: ectx: Menu (edit)
#. +> trunk5 stable5
#: part.rc:18
#, kde-format
msgid "&Edit"
msgstr ""
#. i18n: ectx: Menu (view)
#. +> trunk5 stable5
#: part.rc:31
#, kde-format
msgid "&View"
msgstr ""
#. i18n: ectx: Menu (go)
#. +> trunk5 stable5
#: part.rc:54
#, kde-format
msgid "&Go"
msgstr ""
#. i18n: ectx: Menu (tools)
#. +> trunk5 stable5
#: part.rc:74
#, kde-format
msgid "&Tools"
msgstr ""
#. i18n: ectx: ToolBar (mainToolBar)
#. +> trunk5 stable5
#: part.rc:99 shell/shell.rc:23
#, kde-format
msgid "Main Toolbar"
msgstr ""
#. +> trunk5 stable5
#: shell/main.cpp:59
#, kde-format
msgid "Page of the document to be shown"
msgstr ""
#. +> trunk5 stable5
#: shell/main.cpp:60
#, kde-format
msgid "Start the document in presentation mode"
msgstr ""
#. +> trunk5 stable5
#: shell/main.cpp:61
#, kde-format
msgid "Start with print dialog"
msgstr ""
#. +> trunk5 stable5
#: shell/main.cpp:62
#, kde-format
msgid "Start with print dialog and exit after printing"
msgstr ""
#. +> trunk5 stable5
#: shell/main.cpp:63
#, kde-format
msgid "\"Unique instance\" control"
msgstr ""
#. +> trunk5 stable5
#: shell/main.cpp:64
#, kde-format
msgid "Not raise window"
msgstr ""
#. +> trunk5 stable5
#: shell/main.cpp:65
#, kde-format
msgid "Find a string on the text"
msgstr ""
#. +> trunk5 stable5
#: shell/main.cpp:66
#, kde-format
msgid "Documents to open. Specify '-' to read from stdin."
msgstr ""
#. +> trunk5 stable5
#: shell/okular_main.cpp:127
#, kde-format
msgid "Error: Can't open more than one document with the --unique switch"
msgstr ""
#. +> trunk5 stable5
#: shell/okular_main.cpp:134
#, kde-format
msgid "Error: Can't open more than one document with the --presentation switch"
msgstr ""
#. +> trunk5 stable5
#: shell/okular_main.cpp:141
#, kde-format
msgid "Error: Can't open more than one document with the --print switch"
msgstr ""
#. +> trunk5 stable5
#: shell/okular_main.cpp:148
#, kde-format
msgid "Error: Can't open more than one document with the --page switch"
msgstr ""
#. +> trunk5 stable5
#: shell/okular_main.cpp:155
#, kde-format
msgid "Error: Can't open more than one document with the --find switch"
msgstr ""
#. +> trunk5 stable5
#: shell/shell.cpp:92
#, kde-format
msgid "Unable to find the Okular component: %1"
msgstr ""
#. +> trunk5 stable5
#: shell/shell.cpp:135
#, kde-format
msgid "There is already a unique Okular instance running. This instance won't be the unique one."
msgstr ""
#. +> trunk5 stable5
#: shell/shell.cpp:152
#, kde-format
msgid "Unable to find the Okular component."
msgstr ""
#. +> trunk5 stable5
#: shell/shell.cpp:356
#, kde-format
msgid ""
"Click to open a file\n"
"Click and hold to open a recent file"
msgstr ""
#. +> trunk5 stable5
#: shell/shell.cpp:357
#, kde-format
msgid "<b>Click</b> to open a file or <b>Click and hold</b> to select a recent file"
msgstr ""
#. +> trunk5 stable5
#: shell/shell.cpp:370
#, kde-format
msgid "Next Tab"
msgstr ""
#. +> trunk5 stable5
#: shell/shell.cpp:376
#, kde-format
msgid "Previous Tab"
msgstr ""
#. +> trunk5
#: shell/shell.cpp:382
#, kde-format
msgid "Undo close tab"
msgstr ""
#. +> trunk5 stable5
#: shell/shell.cpp:492
#, kde-format
msgid "All files (*)"
msgstr ""
#. +> trunk5 stable5
#: shell/shell.cpp:493
#, kde-format
msgid "All supported files (%1)"
msgstr ""
#. +> trunk5 stable5
#: shell/shell.cpp:496
#, kde-format
msgid "Open Document"
msgstr ""
#. +> trunk5 stable5
#: shell/shell.cpp:602
#, kde-format
msgid "Confirm Close"
msgstr ""
#. +> trunk5 stable5
#: shell/shell.cpp:606
#, kde-format
msgid "Close Tabs"
msgstr ""
#. +> trunk5 stable5
#: shell/shell.cpp:612
#, kde-format
msgid "You are about to close %1 tabs. Are you sure you want to continue?"
msgstr ""
#. +> trunk5 stable5
#: shell/shell.cpp:613
#, kde-format
msgid "Warn me when I attempt to close multiple tabs"
msgid "There are two ways of exiting presentation mode, you can press either ESC key or click with the quit button that appears when placing the mouse in the top-right corner. Of course you can cycle windows (Alt+TAB by default)"
msgstr ""
#. +> trunk5 stable5
#: ui/presentationwidget.cpp:1793
#, kde-format
msgctxt "Reason for inhibiting the screensaver activation, when the presentation mode is active"
# This file is distributed under the same license as the okular package.
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
#, fuzzy
msgid ""
msgstr ""
"Project-Id-Version: okular\n"
"Report-Msgid-Bugs-To: https://bugs.kde.org\n"
-"POT-Creation-Date: 2020-01-25 15:59+0100\n"
+"POT-Creation-Date: 2020-02-22 09:20+0100\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <kde-i18n-doc@kde.org>\n"
"Language: \n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
#. +> trunk5 stable5
#, kde-format
msgctxt "NAME OF TRANSLATORS"
msgid "Your names"
msgstr ""
#. +> trunk5 stable5
#, kde-format
msgctxt "EMAIL OF TRANSLATORS"
msgid "Your emails"
msgstr ""
#. +> trunk5 stable5
#: dviexport.cpp:129
#, kde-format
msgid ""
"<qt>"
"<p>Okular could not locate the program <em>dvipdfm</em> on your computer. This program is essential for the export function to work. You can, however, convert the DVI-file to PDF using the print function of Okular, but that will often produce documents which print okay, but are of inferior quality if viewed in Acrobat Reader. It may be wise to upgrade to a more recent version of your TeX distribution which includes the <em>dvipdfm</em> program.</p>"
"<p>Hint to the perplexed system administrator: Okular uses the PATH environment variable when looking for programs.</p>"
"</qt>"
msgstr ""
#. +> trunk5 stable5
#: dviexport.cpp:148
#, kde-format
msgid "<qt>The external program 'dvipdfm', which was used to export the file, reported an error. You might wish to look at the <strong>document info dialog</strong> which you will find in the File-Menu for a precise error report.</qt>"
msgstr ""
#. +> trunk5 stable5
#: dviexport.cpp:177
#, kde-format
msgid "<qt>This DVI file refers to external graphic files which are not in PostScript format, and cannot be handled by the <em>dvips</em> program that Okular uses internally to print or to export to PostScript. The functionality that you require is therefore unavailable in this version of Okular.</qt>"
msgstr ""
#. +> trunk5 stable5
#: dviexport.cpp:184
#, kde-format
msgid ""
"<qt>"
"<p>Okular could not locate the program <em>dvips</em> on your computer. That program is essential for the export function to work.</p>"
"<p>Hint to the perplexed system administrator: Okular uses the PATH environment variable when looking for programs.</p>"
"</qt>"
msgstr ""
#. +> trunk5 stable5
#: dviexport.cpp:281
#, kde-format
msgid "<qt>The external program 'dvips', which was used to export the file, reported an error. You might wish to look at the <strong>document info dialog</strong> which you will find in the File-Menu for a precise error report.</qt>"
msgstr ""
#. +> trunk5 stable5
#: dviFile.cpp:113
#, kde-format
msgid "The DVI file does not start with the preamble."
msgstr ""
#. +> trunk5 stable5
#: dviFile.cpp:118
#, kde-format
msgid "The DVI file contains the wrong version of DVI output for this program. Hint: If you use the typesetting system Omega, you have to use a special program, such as oxdvi."
msgstr ""
#. +> trunk5 stable5
#: dviFile.cpp:156
#, kde-format
msgid "The DVI file is badly corrupted. Okular was not able to find the postamble."
msgstr ""
#. +> trunk5 stable5
#: dviFile.cpp:171
#, kde-format
msgid "The postamble does not begin with the POST command."
msgstr ""
#. +> trunk5 stable5
#: dviFile.cpp:224
#, kde-format
msgid "The postamble contained a command other than FNTDEF."
msgstr ""
#. +> trunk5 stable5
#: dviFile.cpp:260
#, kde-format
msgid "The page %1 does not start with the BOP command."
msgstr ""
#. +> trunk5 stable5
#: dviFile.cpp:392
#, kde-format
msgid ""
"<qt>"
"<p>The external program <strong>pdf2ps</strong> could not be started. As a result, the PDF-file %1 could not be converted to PostScript. Some graphic elements in your document will therefore not be displayed.</p>"
"<p><b>Possible reason:</b> The program <strong>pdf2ps</strong> may not be installed on your system, or cannot be found in the current search path.</p>"
"<p><b>What you can do:</b> The program <strong>pdf2ps</strong> is normally contained in distributions of the ghostscript PostScript interpreter system. If ghostscript is not installed on your system, you could install it now. If you are sure that ghostscript is installed, try to use <strong>pdf2ps</strong> from the command line to check if it really works.</p>"
"<p><em>PATH:</em> %2</p>"
"</qt>"
msgstr ""
#. +> trunk5 stable5
#: dviFile.cpp:416
#, kde-format
msgid ""
"<qt>"
"<p>The PDF-file %1 could not be converted to PostScript. Some graphic elements in your document will therefore not be displayed.</p>"
"<p><b>Possible reason:</b> The file %1 might be broken, or might not be a PDF-file at all. This is the output of the <strong>pdf2ps</strong> program that Okular used:</p>"
"<p><strong>%2</strong></p>"
"</qt>"
msgstr ""
#. +> trunk5 stable5
#: dviRenderer.cpp:228 dviRenderer.cpp:471
#, kde-format
msgid "File corruption. %1"
msgstr ""
#. +> trunk5 stable5
#: dviRenderer.cpp:365
#, kde-format
msgid "Not all PostScript files could be embedded into your document. %1"
msgstr ""
#. +> trunk5 stable5
#: dviRenderer.cpp:368
#, kde-format
msgid "All external PostScript files were embedded into your document."
msgstr ""
#. +> trunk5 stable5
#: dviRenderer.cpp:456
#, kde-format
msgid "The specified file '%1' does not exist."
msgstr ""
#. +> trunk5 stable5
#: dviRenderer.cpp:615
#, kde-format
msgid "You have asked Okular to locate the place in the DVI file which corresponds to line %1 in the TeX-file %2. It seems, however, that the DVI file does not contain the necessary source file information. "
msgstr ""
#. +> trunk5 stable5
#: dviRenderer.cpp:655
#, kde-format
msgid "Okular was not able to locate the place in the DVI file which corresponds to line %1 in the TeX-file %2."
msgstr ""
#. +> trunk5 stable5
#: dviRenderer_draw.cpp:263
#, kde-format
msgid "The DVI code set a character of an unknown font."
msgid "The DVI code referred to a font which was not previously defined."
msgstr ""
#. +> trunk5 stable5
#: dviRenderer_draw.cpp:576
#, kde-format
msgid "An illegal command was encountered."
msgstr ""
#. +> trunk5 stable5
#: dviRenderer_draw.cpp:581
#, kde-format
msgid "The unknown op-code %1 was encountered."
msgstr ""
#. +> trunk5 stable5
#: dviRenderer_prescan.cpp:89
#, kde-format
msgid "Embedding %1"
msgstr ""
#. +> trunk5 stable5
#: dviRenderer_prescan.cpp:104
#, kde-format
msgid "Page %1: The PDF file <strong>%2</strong> could not be converted to PostScript.<br>"
msgstr ""
#. +> trunk5 stable5
#: dviRenderer_prescan.cpp:106
#, kde-format
msgid "Page %1: The PostScript file <strong>%2</strong> could not be found.<br>"
msgstr ""
#. +> trunk5 stable5
#: dviRenderer_prescan.cpp:255
#, kde-format
msgid "The papersize data '%1' could not be parsed."
msgstr ""
#. +> trunk5 stable5
#: fontpool.cpp:209
#, kde-format
msgid ""
"<qt>"
"<p>Okular was not able to locate all the font files which are necessary to display the current DVI file. Your document might be unreadable.</p>"
"<p><small><b>PATH:</b> %1</small></p>"
"<p><small>%2</small></p>"
"</qt>"
msgstr ""
#. +> trunk5 stable5
#: fontpool.cpp:279
#, kde-format
msgid ""
"<qt>"
"<p>There were problems running <em>kpsewhich</em>. As a result, some font files could not be located, and your document might be unreadable.<br/>"
"Possible reason: the <em>kpsewhich</em> program is perhaps not installed on your system, or it cannot be found in the current search path.</p>"
"<p><small><b>PATH:</b> %1</small></p>"
"<p><small>%2</small></p>"
"</qt>"
msgstr ""
#. +> trunk5 stable5
#: fontpool.cpp:298
#, kde-format
msgid "<qt>The font generation by <em>kpsewhich</em> was aborted (exit code %1, error %2). As a result, some font files could not be located, and your document might be unreadable.</qt>"
msgstr ""
#. +> trunk5 stable5
#: fontpool.cpp:476
#, kde-format
msgid "Currently generating %1 at %2 dpi..."
msgstr ""
#. +> trunk5 stable5
-#: generator_dvi.cpp:327
+#: generator_dvi.cpp:322
#, kde-format
msgid "Generator/Date"
msgstr ""
#. +> trunk5 stable5
-#: generator_dvi.cpp:424
+#: generator_dvi.cpp:419
#, kde-format
msgid "Font file not found"
msgstr ""
#. +> trunk5 stable5
-#: pageSize.cpp:323
+#: pageSize.cpp:308
#, kde-format
msgid "portrait"
msgstr ""
#. +> trunk5 stable5
-#: pageSize.cpp:325
+#: pageSize.cpp:310
#, kde-format
msgid "landscape"
msgstr ""
#. +> trunk5 stable5
#: psgs.cpp:264
#, kde-format
msgid "The version of Ghostview that is installed on this computer does not contain any of the Ghostview device drivers that are known to Okular. PostScript support has therefore been turned off in Okular."
msgstr ""
#. +> trunk5 stable5
#: psgs.cpp:268
#, kde-format
msgid ""
"<qt>"
"<p>The Ghostview program, which Okular uses internally to display the PostScript graphics that is included in this DVI file, is generally able to write its output in a variety of formats. The sub-programs that Ghostview uses for these tasks are called 'device drivers'; there is one device driver for each format that Ghostview is able to write. Different versions of Ghostview often have different sets of device drivers available. It seems that the version of Ghostview that is installed on this computer does not contain <strong>any</strong> of the device drivers that are known to Okular.</p>"
"<p>It seems unlikely that a regular installation of Ghostview would not contain these drivers. This error may therefore point to a serious misconfiguration of the Ghostview installation on your computer.</p>"
"<p>If you want to fix the problems with Ghostview, you can use the command <strong>gs --help</strong> to display the list of device drivers contained in Ghostview. Among others, Okular can use the 'png256', 'jpeg' and 'pnm' drivers. Note that Okular needs to be restarted to re-enable PostScript support.</p>"
"</qt>"
msgstr ""
#. +> trunk5 stable5
#: special.cpp:36
#, kde-format
msgid "That makes 25 errors. Further error messages will not be printed."
msgstr ""
#. +> trunk5 stable5
#: special.cpp:217
#, kde-format
msgid "Error in DVIfile '%1', page %2. Color pop command issued when the color stack is empty."
msgstr ""
#. +> trunk5 stable5
#: special.cpp:302
#, kde-format
msgid ""
"Malformed parameter in the epsf special command.\n"
"Expected a float to follow %1 in %2"
msgstr ""
#. +> trunk5 stable5
#: special.cpp:433
#, kde-format
msgid ""
"File not found: \n"
" %1"
msgstr ""
#. +> trunk5 stable5
#: special.cpp:679
#, kde-format
msgid "Error in DVIfile '%1', page %2. Could not interpret angle in text rotation special."
msgstr ""
#. +> trunk5 stable5
#: special.cpp:702
#, kde-format
msgid "The special command '%1' is not implemented."
msgstr ""
#. +> trunk5 stable5
#: TeXFont_PFB.cpp:44
#, kde-format
msgid "The font file %1 could be opened and read, but its font format is unsupported."
msgstr ""
#. +> trunk5 stable5
#: TeXFont_PFB.cpp:50
#, kde-format
msgid "The font file %1 is broken, or it could not be opened or read."
msgstr ""
#. +> trunk5 stable5
#: TeXFont_PFB.cpp:171
#, kde-format
msgid "FreeType reported an error when setting the character size for font file %1."
msgstr ""
#. +> trunk5 stable5
#: TeXFont_PFB.cpp:187
#, kde-format
msgid "FreeType is unable to load glyph #%1 from font file %2."
msgstr ""
#. +> trunk5 stable5
#: TeXFont_PFB.cpp:199
#, kde-format
msgid "FreeType is unable to render glyph #%1 from font file %2."
msgstr ""
#. +> trunk5 stable5
#: TeXFont_PFB.cpp:212
#, kde-format
msgid "Glyph #%1 is empty."
msgstr ""
#. +> trunk5 stable5
#: TeXFont_PFB.cpp:213
#, kde-format
msgid "Glyph #%1 from font file %2 is empty."
msgstr ""
#. +> trunk5 stable5
#: TeXFont_PFB.cpp:281
#, kde-format
msgid "FreeType is unable to load metric for glyph #%1 from font file %2."
msgstr ""
#. +> trunk5 stable5
#: TeXFont_PK.cpp:90
#, kde-format
msgid "Cannot open font file %1."
msgstr ""
#. +> trunk5 stable5
#: TeXFont_PK.cpp:138
#, kde-format
msgid "TexFont_PK::operator[]: Character %1 not defined in font %2"
msgstr ""
#. +> trunk5 stable5
#: TeXFont_PK.cpp:454
#, kde-format
msgid "Unexpected %1 in PK file %2"
msgstr ""
#. +> trunk5 stable5
#: TeXFont_PK.cpp:521
#, kde-format
msgid "The character %1 is too large in file %2"
msgstr ""
#. +> trunk5 stable5
#: TeXFont_PK.cpp:622 TeXFont_PK.cpp:708
#, kde-format
msgid "Wrong number of bits stored: char. %1, font %2"
msgstr ""
#. +> trunk5 stable5
#: TeXFont_PK.cpp:624 TeXFont_PK.cpp:710
#, kde-format
msgid "Bad pk file (%1), too many bits"
msgstr ""
#. +> trunk5 stable5
#: TeXFont_PK.cpp:741
#, kde-format
msgid "Font has non-square aspect ratio "
msgstr ""
#. +> trunk5 stable5
#: TeXFontDefinition.cpp:109
#, kde-format
msgid "Cannot find font %1, file %2."
msgstr ""
#. +> trunk5 stable5
#: TeXFontDefinition.cpp:125
#, kde-format
msgid "Checksum mismatch for font file %1"
msgstr ""
#. +> trunk5 stable5
#: TeXFontDefinition.cpp:173
#, kde-format
msgid "Cannot recognize format for font file %1"
msgstr ""
#. +> trunk5 stable5
#: util.cpp:79
#, kde-format
msgid ""
"Fatal error.\n"
"\n"
msgstr ""
#. +> trunk5 stable5
#: util.cpp:81
#, kde-format
msgid ""
"\n"
"\n"
"This probably means that either you found a bug in Okular,\n"
"or that the DVI file, or auxiliary files (such as font files, \n"
"or virtual font files) were really badly broken.\n"
"Okular will abort after this message. If you believe that you \n"
"found a bug, or that Okular should behave better in this situation\n"
"please report the problem."
msgstr ""
#. +> trunk5 stable5
#: vf.cpp:182
#, kde-format
msgid "Wrong command byte found in VF macro list: %1"
msgid "Draw the points starting with the highest frequency first."
msgstr ""
#. +> trunk5 stable5
#: data/effects/audiospectrum.xml:45
#, kde-format
msgid "Line Tension"
msgstr ""
#. +> trunk5 stable5
#: data/effects/audiospectrum.xml:46
#, kde-format
msgid "Affects the amount of curve in the line interpolating between points. 0.0 = a straight line between points. 100 = very curved lines between points. Values < 0 and > 100 will cause loops in the lines. Only applies to line graph type."
msgstr ""
#. +> trunk5 stable5
#: data/effects/audiospectrum.xml:49
#, kde-format
msgid "Points"
msgstr ""
#. +> trunk5 stable5
#: data/effects/audiospectrum.xml:50
#, kde-format
msgid "The number of bands to draw in the spectrum. Each band shows up as a data point in the graph."
msgstr ""
#. +> trunk5 stable5
#: data/effects/audiospectrum.xml:53
#, kde-format
msgid "Low Frequency"
msgstr ""
#. +> trunk5 stable5
#: data/effects/audiospectrum.xml:54
#, kde-format
msgid "The low end of the frequency range to be used for the graph."
msgstr ""
#. +> trunk5 stable5
#: data/effects/audiospectrum.xml:57
#, kde-format
msgid "High Frequency"
msgstr ""
#. +> trunk5 stable5
#: data/effects/audiospectrum.xml:58
#, kde-format
msgid "The high end of the frequency range to be used for the graph."
msgstr ""
#. +> trunk5 stable5
#: data/effects/audiospectrum.xml:61
#, kde-format
msgid "Level Threshold"
msgstr ""
#. +> trunk5 stable5
#: data/effects/audiospectrum.xml:62
#, kde-format
msgid "The minimum amplitude of sound that must occur within the frequency range to cause the value to be applied."
msgstr ""
#. +> trunk5 stable5
#: data/effects/audiospectrum.xml:65
#, kde-format
msgid "Window Size"
msgstr ""
#. +> trunk5 stable5
#: data/effects/audiospectrum.xml:66
#, kde-format
msgid "The number of samples that the FFT will be performed on. If window size is less than the number of samples in a frame, extra samples will be ignored. If window size is more than the number of samples in a frame, samples will be buffered from previous frames to fill the window. The buffering is performed as a sliding window so that the most recent samples are always transformed."
msgstr ""
#. +> trunk5 stable5
#: data/effects/audiowave.xml:3
#, kde-format
msgid "Audio Wave"
msgstr ""
#. +> trunk5 stable5
#: data/effects/audiowave.xml:4
#, kde-format
msgid "Display the audio waveform instead of the video"
" <full><![CDATA[This effect allows one to do Light Painting (i.e. painting with light sources on a photo by keeping the shutter\n"
" opened for a while), but for video.]]></full>"
msgstr ""
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:10
#: data/effects/frei0r_lightgraffiti.xml:83
#, kde-format
msgid "Brightness Threshold"
msgstr ""
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:12
#: data/effects/frei0r_lightgraffiti.xml:85
#, kde-format
msgid ""
"<![CDATA[How bright (<code>R+G+B</code>) does a pixel need to be in order to be recognized as a light source?<br/>"
"\n"
" Increasing this threshold requires brighter light sources (i.e. more white or less color, respectively) but prevents some «false alarms» where semi-bright parts, e.g. hands where colors can change quite a lot compared to the background, are incorrectly recognized as light source.]]>"
msgstr ""
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:15
#: data/effects/frei0r_lightgraffiti.xml:88
#, kde-format
msgid "Difference Threshold"
msgstr ""
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:17
#: data/effects/frei0r_lightgraffiti.xml:90
#, kde-format
msgid ""
"<![CDATA[How much does the strongest color channel of a pixel have to change, compared to the background image (<code>max(dR, dG, dB)</code>), in order to be recognized as light source? <br/>"
"\n"
" Increasing this threshold makes it harder for light sources to be accepted on bright backgrounds, but decreases the danger of noise or generally bright spots counting as light source.]]>"
msgstr ""
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:20
#: data/effects/frei0r_lightgraffiti.xml:93
#, kde-format
msgid "Difference Sum Threshold"
msgstr ""
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:22
#: data/effects/frei0r_lightgraffiti.xml:95
#, kde-format
msgid ""
"<![CDATA[How much does the sum of all color channels <em>relative to the background image</em> (<code>dR + dG + dB</code>) have to change until a pixel is recognized as a light source?<br/>"
"\n"
" Raising this value might, in some cases, avoid that some light objects lit by the light source are added to the light mask.]]>"
msgstr ""
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:25
#: data/effects/frei0r_lightgraffiti.xml:98
#, kde-format
msgid "Sensitivity"
msgstr ""
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:27
#: data/effects/frei0r_lightgraffiti.xml:100
#, kde-format
msgid ""
"<![CDATA[Light sensitivity.<br/>"
"\n"
" For slowly moving light source try to use a lower sensitivity to obtain a better exposure.]]>"
msgstr ""
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:30
#: data/effects/frei0r_lightgraffiti.xml:103
#, kde-format
msgid "Lower Overexposure"
msgstr ""
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:32
#: data/effects/frei0r_lightgraffiti.xml:105
#, kde-format
msgid ""
"<![CDATA[Lowers overexposure.<br/>"
"\n"
" The light mask does not get white immediately when the light source is moving slowly or staying steady.]]>"
msgstr ""
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:35
#: data/effects/frei0r_lightgraffiti.xml:108
#, kde-format
msgid "Dimming"
msgstr ""
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:36
#: data/effects/frei0r_lightgraffiti.xml:109
#, kde-format
msgid "Dims the light mask. Lights will leave a fainting trail if it is set to a value > 0."
msgstr ""
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:39
#: data/effects/frei0r_lightgraffiti.xml:112
#, kde-format
msgid "Background Weight"
msgstr ""
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:40
#: data/effects/frei0r_lightgraffiti.xml:113
#, kde-format
msgid "Strength of the (calculated) background image. Setting it to 100 paints the light mask directly over the background, without the painting person in the image if the video starts with a «clean» background image. (See the α parameter.)"
msgstr ""
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:43
#: data/effects/frei0r_lightgraffiti.xml:116
#, kde-format
msgid "α"
msgstr ""
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:45
#: data/effects/frei0r_lightgraffiti.xml:118
#, kde-format
msgid ""
"<![CDATA[Determines how the effect tries to adapt to background changes. <br/>"
"\n"
" The Light Graffiti effect remembers the first frame of the clip it is applied to, so the clip should <em>always</em> start with the painter outside of the video. If the background constantly changes, e.g. on a street, try to set α > 0 to calculate an average background image.]]>"
msgstr ""
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:49
#: data/effects/frei0r_lightgraffiti.xml:122
#, kde-format
msgid "Increases the saturation of lights."
msgstr ""
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:52
#: data/effects/frei0r_lightgraffiti.xml:125
#, kde-format
msgid "Show brightness statistics"
msgstr ""
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:54
#: data/effects/frei0r_lightgraffiti.xml:127
#, kde-format
msgid ""
"<![CDATA[The stats switches allow easy and accurate adjustment of the threshold parameters.<br/>"
"\n"
" Example: To adjust the brightness threshold, check this box and adjust the threshold until the whole light source is highlighted. Repeat the same with the other parameters. Only parts that are highlighted in <em>all</em> thresholds will count as light source.]]>"
msgstr ""
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:57
#: data/effects/frei0r_lightgraffiti.xml:130
#, kde-format
msgid "Show background difference statistics"
msgstr ""
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:60
#: data/effects/frei0r_lightgraffiti.xml:133
#, kde-format
msgid "Show background difference sum statistics"
msgstr ""
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:64
#: data/effects/frei0r_lightgraffiti.xml:137
#, kde-format
msgid "Makes the background transparent, allowing to apply a composite effect and paint the light mask over a completely different video."
msgstr ""
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:67
#: data/effects/frei0r_lightgraffiti.xml:140
#, kde-format
msgid "Nonlinear dimming"
msgstr ""
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:68
#: data/effects/frei0r_lightgraffiti.xml:141
#, kde-format
msgid "If normal dimming does not look natural enough, try this one."
msgid "Resets the light mask and the background image. This is necessary e.g. if you apply this effect to a clip in the timeline and then move the timeline cursor from outside of the clip to the middle of it. The effect receives this frame in the middle as first frame and uses it as background image. For proper threshold adjusting move the timeline cursor to the beginning of the clip, check the Reset box and uncheck it again."
msgstr ""
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:80
#, kde-format
msgid ""
"Light Graffiti effect.\n"
" <full><![CDATA[This effect allows to do Light Painting (i.e. painting with light sources on a photo by keeping the shutter\n"
"<![CDATA[Changing the slope means multiplying the pixel value with a constant value. Black pixels will remain black, whileas brighter ones will be changed.<br/>"
"\n"
" All effects can be observed well when applied on a greyscale gradient and looking at the RGB Parade monitor.]]>"
" is on a removable device, will not be available when device is unplugged or mounted at a different position. You may want to copy it first to your hard-drive. Would you like to add it anyways?"
msgid "%1 missing source clips, you can only use the proxies"
msgstr ""
#. +> trunk5 stable5
#: src/doc/documentchecker.cpp:619
#, kde-format
msgid "Missing source clip"
msgstr ""
#. +> trunk5 stable5
#: src/doc/documentchecker.cpp:717
#, kde-format
msgid "Clips folder"
msgstr ""
#. +> trunk5 stable5
#: src/doc/documentchecker.cpp:909
#, kde-format
msgid "Enter new location for file"
msgstr ""
#. +> trunk5 stable5
#: src/doc/documentchecker.cpp:1183
#, kde-format
msgid "This will remove the selected clip from this project"
msgid_plural "This will remove the selected clips from this project"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: src/doc/documentchecker.cpp:1185
#, kde-format
msgid "Remove clips"
msgstr ""
#. +> trunk5 stable5
#: src/doc/documentvalidator.cpp:145
#, kde-format
msgid "The document was created in \"%1\" locale, which is not installed on your system. Please install that language pack. Until then, Kdenlive might not be able to correctly open the document."
msgstr ""
#. +> trunk5 stable5
#: src/doc/documentvalidator.cpp:158
#, kde-format
msgid "There is a locale conflict on your system. The document uses locale %1 which uses a \"%2\" as numeric separator (in system libraries) but Qt expects \"%3\". You might not be able to correctly open the project."
msgstr ""
#. +> trunk5 stable5
#: src/doc/documentvalidator.cpp:184
#, kde-format
msgid "There is a locale conflict. The document uses a \"%1\" as numeric separator, but your computer is configured to use \"%2\". Change your computer settings or you might not be able to correctly open the project."
msgstr ""
#. +> trunk5 stable5
#: src/doc/documentvalidator.cpp:365
#, kde-format
msgid ""
"This project type is unsupported (version %1) and cannot be loaded.\n"
"Please consider upgrading your Kdenlive version."
msgid "This project type is unsupported (version %1) and cannot be loaded."
msgstr ""
#. +> trunk5 stable5
#: src/doc/documentvalidator.cpp:944
#, kde-format
msgid "Some of your text clips were saved with size in points, which means different sizes on different displays. Do you want to convert them to pixel size, making them portable? It is recommended you do this on the computer they were first created on, or you could have to adjust their size."
msgstr ""
#. +> trunk5 stable5
#: src/doc/documentvalidator.cpp:947
#, kde-format
msgid "Update Text Clips"
msgstr ""
#. +> trunk5 stable5
#: src/doc/documentvalidator.cpp:1820
#, kde-format
msgid "extra audio"
msgstr ""
#. +> trunk5 stable5
#: src/doc/documentvalidator.cpp:2116
#, kde-format
msgid ""
"The project file uses some GPU effects. GPU acceleration is not currently enabled.\n"
"Do you want to convert the project to a non-GPU version?\n"
"This might result in data loss."
msgstr ""
#. +> trunk5 stable5
#: src/doc/documentvalidator.cpp:2208
#, kde-format
msgid "The following filters/transitions were converted to non GPU versions:"
msgstr ""
#. +> trunk5 stable5
#: src/doc/documentvalidator.cpp:2211
#, kde-format
msgid "The following filters/transitions were deleted from the project:"
msgid "You have changed the proxy parameters. Do you want to recreate all proxy clips for this project?"
msgstr ""
#. +> trunk5 stable5
-#: src/mainwindow.cpp:1863
+#: src/mainwindow.cpp:1866
#, kde-format
msgid "The current project has not been saved. This will first save the project, then move all temporary files from <b>%1</b> to <b>%2</b>, and the project file will be reloaded"
msgstr ""
#. +> trunk5 stable5
-#: src/mainwindow.cpp:1871
+#: src/mainwindow.cpp:1874
#, kde-format
msgid "This will move all temporary files from <b>%1</b> to <b>%2</b>, the project file will then be reloaded"
msgid "Enter your freesound account details to download the highest quality version of this file. Or use the High Quality preview file instead (no freesound account required)."
msgstr ""
#. +> trunk5 stable5
#: src/scopes/abstractscopewidget.cpp:70
#, kde-format
msgid "Auto Refresh"
msgstr ""
#. +> trunk5 stable5
#: src/scopes/abstractscopewidget.cpp:72
#, kde-format
msgid "Realtime (with precision loss)"
msgstr ""
#. +> trunk5 stable5
#: src/scopes/audioscopes/audiospectrum.cpp:60
#: src/scopes/audioscopes/spectrogram.cpp:47
#, kde-format
msgid "Reset maximum frequency to sampling rate"
msgstr ""
#. +> trunk5 stable5
#: src/scopes/audioscopes/audiospectrum.cpp:61
#: src/scopes/audioscopes/spectrogram.cpp:50
#, kde-format
msgid "Track mouse"
msgstr ""
#. +> trunk5 stable5
#: src/scopes/audioscopes/audiospectrum.cpp:63
#, kde-format
msgid "Show maximum"
msgstr ""
#. +> trunk5 stable5
#: src/scopes/audioscopes/audiospectrum.cpp:77
#: src/scopes/audioscopes/spectrogram.cpp:67
#, kde-format
msgid "Rectangular window"
msgstr ""
#. +> trunk5 stable5
#: src/scopes/audioscopes/audiospectrum.cpp:78
#: src/scopes/audioscopes/spectrogram.cpp:68
#, kde-format
msgid "Triangular window"
msgstr ""
#. +> trunk5 stable5
#: src/scopes/audioscopes/audiospectrum.cpp:79
#: src/scopes/audioscopes/spectrogram.cpp:69
#, kde-format
msgid "Hamming window"
msgstr ""
#. +> trunk5 stable5
#: src/scopes/audioscopes/audiospectrum.cpp:86
#: src/scopes/audioscopes/spectrogram.cpp:72
#, kde-format
msgid "The maximum window size is limited by the number of samples per frame."
msgstr ""
#. +> trunk5 stable5
#: src/scopes/audioscopes/audiospectrum.cpp:87
#: src/scopes/audioscopes/spectrogram.cpp:73
#, kde-format
msgid "A bigger window improves the accuracy at the cost of computational power."
msgstr ""
#. +> trunk5 stable5
#: src/scopes/audioscopes/audiospectrum.cpp:88
#: src/scopes/audioscopes/spectrogram.cpp:74
#, kde-format
msgid "The rectangular window function is good for signals with equal signal strength (narrow peak), but creates more smearing. See Window function on Wikipedia."
msgid "This title clip was created with a different frame size."
msgstr ""
#. +> trunk5 stable5
#: src/titler/titledocument.cpp:378
#, kde-format
msgid "Title Profile"
msgstr ""
#. +> trunk5 stable5
#: src/titler/titledocument.cpp:430
#, kde-format
msgid "Some of your text clips were saved with size in points, which means different sizes on different displays. They will be converted to pixel size, making them portable, but you could have to adjust their size."
msgid "Information about unicode characters: <a href=\"https://decodeunicode.org\">https://decodeunicode.org</a>"
msgstr ""
#. +> stable5
#: src/titler/unicodedialog.cpp:78
#, kde-format
msgid "Information about unicode characters: <a href=\"http://decodeunicode.org\">http://decodeunicode.org</a>"
msgstr ""
#. +> trunk5 stable5
#: src/titler/unicodedialog.cpp:79
#, kde-format
msgid "Previous Unicode character (Arrow Up)"
msgstr ""
#. +> trunk5 stable5
#: src/titler/unicodedialog.cpp:80
#, kde-format
msgid "Next Unicode character (Arrow Down)"
msgstr ""
#. +> trunk5 stable5
#: src/titler/unicodedialog.cpp:81
#, kde-format
msgid "Enter your Unicode number here. Allowed characters: [0-9] and [a-f]."
msgstr ""
#. +> trunk5 stable5
#: src/titler/unicodedialog.cpp:137
#, kde-format
msgid "<small>(no character selected)</small>"
msgstr ""
#. +> trunk5
#: src/titler/unicodedialog.cpp:146
#, kde-format
msgid "Control character. Cannot be inserted/printed. See <a href=\"https://en.wikipedia.org/wiki/Control_character\">Wikipedia:Control_character</a>"
msgstr ""
#. +> stable5
#: src/titler/unicodedialog.cpp:146
#, kde-format
msgid "Control character. Cannot be inserted/printed. See <a href=\"http://en.wikipedia.org/wiki/Control_character\">Wikipedia:Control_character</a>"
msgstr ""
#. +> trunk5 stable5
#: src/titler/unicodedialog.cpp:148
#, kde-format
msgid "Line Feed (newline character, \\\\n)"
msgstr ""
#. +> trunk5 stable5
#: src/titler/unicodedialog.cpp:150
#, kde-format
msgid "Standard space character. (Other space characters: U+00a0, U+2000–200b, U+202f)"
msgstr ""
#. +> trunk5 stable5
#: src/titler/unicodedialog.cpp:152
#, kde-format
msgid "No-break space. &nbsp; in HTML. See U+2009 and U+0020."
msgstr ""
#. +> trunk5
#: src/titler/unicodedialog.cpp:155
#, kde-format
msgid ""
"<p><strong>«</strong> (u+00ab, <code>&lfquo;</code> in HTML) and <strong>»</strong> (u+00bb, <code>&rfquo;</code> in HTML) are called Guillemets or angle quotes. Usage in different countries: France (with non-breaking Space 0x00a0), Switzerland, Germany, Finland and Sweden.</p>"
"<p><strong>‹</strong> and <strong>›</strong> (U+2039/203a, <code>&lsaquo;/&rsaquo;</code>) are their single quote equivalents.</p>"
"<p><strong>«</strong> (u+00ab, <code>&lfquo;</code> in HTML) and <strong>»</strong> (u+00bb, <code>&rfquo;</code> in HTML) are called Guillemets or angle quotes. Usage in different countries: France (with non-breaking Space 0x00a0), Switzerland, Germany, Finland and Sweden.</p>"
"<p><strong>‹</strong> and <strong>›</strong> (U+2039/203a, <code>&lsaquo;/&rsaquo;</code>) are their single quote equivalents.</p>"
msgid "Three-Per-Em Space. Width: 1/3 of one <em>em</em>"
msgstr ""
#. +> trunk5 stable5
#: src/titler/unicodedialog.cpp:166
#, kde-format
msgid "Four-Per-Em Space. Width: 1/4 of one <em>em</em>"
msgstr ""
#. +> trunk5 stable5
#: src/titler/unicodedialog.cpp:168
#, kde-format
msgid "Six-Per-Em Space. Width: 1/6 of one <em>em</em>"
msgstr ""
#. +> trunk5 stable5
#: src/titler/unicodedialog.cpp:170
#, kde-format
msgid "Figure space (non-breaking). Width of a digit if digits have fixed width in this font."
msgstr ""
#. +> trunk5 stable5
#: src/titler/unicodedialog.cpp:172
#, kde-format
msgid "Punctuation Space. Width the same as between a punctuation character and the next character."
msgstr ""
#. +> trunk5
#: src/titler/unicodedialog.cpp:174
#, kde-format
msgid "Thin space, in HTML also &thinsp;. See U+202f and <a href=\"https://en.wikipedia.org/wiki/Space_(punctuation)\">Wikipedia:Space_(punctuation)</a>"
msgstr ""
#. +> stable5
#: src/titler/unicodedialog.cpp:174
#, kde-format
msgid "Thin space, in HTML also &thinsp;. See U+202f and <a href=\"http://en.wikipedia.org/wiki/Space_(punctuation)\">Wikipedia:Space_(punctuation)</a>"
msgstr ""
#. +> trunk5 stable5
#: src/titler/unicodedialog.cpp:177
#, kde-format
msgid "Hair Space. Thinner than U+2009."
msgstr ""
#. +> trunk5
#: src/titler/unicodedialog.cpp:180
#, kde-format
msgid "Punctuation Apostrophe. Should be used instead of U+0027. See <a href=\"https://en.wikipedia.org/wiki/Apostrophe\">Wikipedia:Apostrophe</a>"
msgstr ""
#. +> stable5
#: src/titler/unicodedialog.cpp:180
#, kde-format
msgid "Punctuation Apostrophe. Should be used instead of U+0027. See <a href=\"http://en.wikipedia.org/wiki/Apostrophe\">Wikipedia:Apostrophe</a>"
msgstr ""
#. +> trunk5
#: src/titler/unicodedialog.cpp:182
#, kde-format
msgid ""
"<p>An en Dash (dash of the width of an n).</p>"
"<p>Usage examples: In English language for value ranges (1878–1903), for relationships/connections (Zurich–Dublin). In the German language it is also used (with spaces!) for showing thoughts: “Es war – wie immer in den Ferien – ein regnerischer Tag.</p>"
"<p>Usage examples: In English language for value ranges (1878–1903), for relationships/connections (Zurich–Dublin). In the German language it is also used (with spaces!) for showing thoughts: “Es war – wie immer in den Ferien – ein regnerischer Tag.</p>"
"<p>Narrow no-break space. Has the same width as U+2009.</p>"
"<p>Usage: For units (spaces are marked with U+2423, ␣): 230␣V, −21␣°C, 50␣lb, <em>but</em> 90° (no space). In German for abbreviations (like: i. d. R. instead of i. d. R. with U+00a0).</p>"
"<p>Narrow no-break space. Has the same width as U+2009.</p>"
"<p>Usage: For units (spaces are marked with U+2423, ␣): 230␣V, −21␣°C, 50␣lb, <em>but</em> 90° (no space). In German for abbreviations (like: i. d. R. instead of i. d. R. with U+00a0).</p>"
msgid "Ellipsis: If text has been left o… See <a href=\"https://en.wikipedia.org/wiki/Ellipsis\">Wikipedia:Ellipsis</a>"
msgstr ""
#. +> stable5
#: src/titler/unicodedialog.cpp:195
#, kde-format
msgid "Ellipsis: If text has been left o… See <a href=\"http://en.wikipedia.org/wiki/Ellipsis\">Wikipedia:Ellipsis</a>"
msgstr ""
#. +> trunk5 stable5
#: src/titler/unicodedialog.cpp:197
#, kde-format
msgid "Minus sign. For numbers: −42"
msgstr ""
#. +> trunk5 stable5
#: src/titler/unicodedialog.cpp:199
#, kde-format
msgid "Open box; stands for a space."
msgstr ""
#. +> trunk5
#: src/titler/unicodedialog.cpp:201
#, kde-format
msgid "Quarter note (Am.) or crochet (Brit.). See <a href=\"https://en.wikipedia.org/wiki/Quarter_note\">Wikipedia:Quarter_note</a>"
msgstr ""
#. +> stable5
#: src/titler/unicodedialog.cpp:201
#, kde-format
msgid "Quarter note (Am.) or crochet (Brit.). See <a href=\"http://en.wikipedia.org/wiki/Quarter_note\">Wikipedia:Quarter_note</a>"
msgstr ""
#. +> trunk5
#: src/titler/unicodedialog.cpp:203
#, kde-format
msgid "Eighth note (Am.) or quaver (Brit.). Half as long as a quarter note (U+2669). See <a href=\"https://en.wikipedia.org/wiki/Eighth_note\">Wikipedia:Eighth_note</a>"
msgstr ""
#. +> stable5
#: src/titler/unicodedialog.cpp:203
#, kde-format
msgid "Eighth note (Am.) or quaver (Brit.). Half as long as a quarter note (U+2669). See <a href=\"http://en.wikipedia.org/wiki/Eighth_note\">Wikipedia:Eighth_note</a>"
msgstr ""
#. +> trunk5
#: src/titler/unicodedialog.cpp:206
#, kde-format
msgid "Sixteenth note (Am.) or semiquaver (Brit.). Half as long as an eighth note (U+266a). See <a href=\"https://en.wikipedia.org/wiki/Sixteenth_note\">Wikipedia:Sixteenth_note</a>"
msgstr ""
#. +> stable5
#: src/titler/unicodedialog.cpp:206
#, kde-format
msgid "Sixteenth note (Am.) or semiquaver (Brit.). Half as long as an eighth note (U+266a). See <a href=\"http://en.wikipedia.org/wiki/Sixteenth_note\">Wikipedia:Sixteenth_note</a>"
msgstr ""
#. +> trunk5
#: src/titler/unicodedialog.cpp:209
#, kde-format
msgid "Thirty-second note (Am.) or demisemiquaver (Brit.). Half as long as a sixteenth note (U+266b). See <a href=\"https://en.wikipedia.org/wiki/Thirty-second_note\">Wikipedia:Thirty-second_note</a>"
msgstr ""
#. +> stable5
#: src/titler/unicodedialog.cpp:209
#, kde-format
msgid "Thirty-second note (Am.) or demisemiquaver (Brit.). Half as long as a sixteenth note (U+266b). See <a href=\"http://en.wikipedia.org/wiki/Thirty-second_note\">Wikipedia:Thirty-second_note</a>"
msgstr ""
#. +> trunk5 stable5
#: src/titler/unicodedialog.cpp:212
#, kde-format
msgid "<small>No additional information available for this character.</small>"
msgstr ""
#. +> trunk5 stable5
#: src/transitions/transitionsrepository.cpp:46
#, kde-format
msgid "Some of your favorite compositions are invalid and were removed: %1"
"<p>Enter your freesound account details to download the highest quality version of this file. Or use the High Quality preview file instead (no freesound account required).</p>"
"HQ preview files are all mp3 files. We have added .mp3 as a file extension to the destination file name you chose. However, there is an existing file of this name present.\n"
msgid "Try importing again to obtain a new freesound connection"
msgstr ""
#. +> trunk5 stable5
#: src/utils/resourcewidget.cpp:796
#, kde-format
msgid "Do you want to overwrite the existing file?"
msgstr ""
#. +> trunk5 stable5
#: src/utils/resourcewidget.cpp:840
#, kde-format
msgid "Saved file to"
msgstr ""
#. +> trunk5 stable5
#: src/utils/resourcewidget.cpp:847
#, kde-format
msgid "Error Saving File"
msgstr ""
#. +> trunk5 stable5
#: src/utils/resourcewidget.cpp:860
#, kde-format
msgid "Error Downloading File. Error code: %1"
msgstr ""
#. +> trunk5 stable5
#: src/utils/thememanager.cpp:75
#, kde-format
msgid "&Color Theme"
msgstr ""
#. +> trunk5 stable5
#: src/widgets/colorpickerwidget.cpp:67
#, kde-format
msgid "Pick a color on the screen. By pressing the mouse button and then moving your mouse you can select a section of the screen from which to get an average color."
# Copyright (C) YEAR Free Software Foundation, Inc.
# This file is distributed under the same license as the PACKAGE package.
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
#, fuzzy
msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2020-02-21 08:32+0100\n"
+"POT-Creation-Date: 2020-02-22 09:22+0100\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <kde-i18n-doc@kde.org>\n"
"Language: \n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
#. +> trunk5
#: config.yaml:0
msgid "Get Involved"
msgstr ""
#. +> trunk5
#: config.yaml:0
msgid "Donate"
msgstr ""
#. +> trunk5
#: config.yaml:0
msgid "KDE Announcement | Release Service"
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/19.12-rc/_index.md:3
msgid "title: 19.12 RC Releases"
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/19.12-rc/_index.md:5
msgid "summary: \"Over 120 individual programs plus dozens of programmer libraries and feature plugins are released simultaneously as part of KDE's release service.\""
msgid "November 29, 2019. Over 120 individual programs plus dozens of programmer libraries and feature plugins are released simultaneously as part of KDE's release service."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/19.12-rc/_index.md:16
msgid "Today they all get release candidate sources meaning they are feature complete but need testing for final bugfixes."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/19.12-rc/_index.md:18
msgid "Distro and app store packagers should update their pre-release channels to check for issues."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/19.12-rc/_index.md:22
msgid "+ [19.12 release notes](https://community.kde.org/Releases/19.12_Release_Notes) for information on tarballs and known issues. + [Package download wiki page](https://community.kde.org/Get_KDE_Software_on_Your_Linux_Distro) + [19.12 RC source info page](https://kde.org/info/applications-19.11.90)"
msgstr ""
#. type: Title ##
#. +> trunk5
#: content/19.12-rc/_index.md:23
#, no-wrap
msgid "Press Contacts"
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/19.12-rc/_index.md:25
msgid "For more information send us an email: [press@kde.org](mailto:press@kde.org)."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2019-12-apps-update/_index.md:3
msgid "title: KDE's December 2019 Apps Update"
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2019-12-apps-update/_index.md:5
#: content/2020-01-apps-update/_index.md:9
#: content/2020-02-apps-update/_index.md:9
msgid "summary: \"What Happened in KDE's Applications This Month\""
msgid "New versions of KDE applications landing in December"
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2019-12-apps-update/_index.md:16
msgid "The release of new versions for KDE applications is part of KDE's continued effort to bring you a complete and up-to-date catalog of fully-featured, beautiful and useful programs for your system."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2019-12-apps-update/_index.md:18
msgid "Available now are new versions of KDE's file browser Dolphin; Kdenlive, one of the most complete open source video editors; the document viewer Okular; KDE's image viewer, Gwenview; and all of your other favorite KDE apps and utilities. All of these applications have been improved, making them faster and more stable and they boast exciting new features. The new versions of KDE applications let you be productive and creative, while at the same time making use of KDE software easy and fun."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2019-12-apps-update/_index.md:20
msgid "We hope you enjoy all the novel features and improvements worked into all of KDE's apps!"
msgid "[Calligra Plan](https://kde.org/applications/office/org.kde.calligraplan) is getting a big release in December. KDE's project planning and management tool has hit a huge milestone since the prior version was released almost two years ago."
msgid "Plan helps you manage small and large projects with multiple resources. In order for you to model your project, Plan offers different types of task dependencies and timing constraints. You can define your tasks, estimate the effort needed to perform each, allocate resources and then schedule the project according to your needs and the resources available."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2019-12-apps-update/_index.md:30
msgid "One of Plan's strengths is its excellent support for Gantt charts. Gantt charts are charts made up of horizontal bars that provide a graphical illustration of a schedule and help plan, coordinate, and track specific tasks in a project. Using Gantt charts in Plan will help you better monitor your project's workflow."
msgstr ""
#. type: Title ##
#. +> trunk5
#: content/2019-12-apps-update/_index.md:31
#, no-wrap
msgid "Pump up the Volume on [Kdenlive](https://kdenlive.org)"
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2019-12-apps-update/_index.md:34
msgid "Developers of [Kdenlive](https://kdenlive.org) have been adding new features and squashing bugs at breakneck speed. This version alone comes with more than 200 commits."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2019-12-apps-update/_index.md:36
msgid "A lot of work has gone into improving support for audio. In the \"bug solved\" department they have gotten rid of a huge memory consumption issue, inefficiency of audio thumbnails, and have sped up their storage."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2019-12-apps-update/_index.md:38
msgid "But even more exciting is that Kdenlive now comes with a spectacular new sound mixer (see image). Developers have also added a new audio clip display in the clip monitor and the project bin so you can better synchronize your moving images with the soundtrack."
msgid "In the \"resolving paper-cuts\" department, Kdenlive has acquired many performance and usability improvements, and developers have fixed many bugs in the Windows version of the video editor."
msgstr ""
#. type: Title ##
#. +> trunk5
#: content/2019-12-apps-update/_index.md:43
#, no-wrap
msgid "[Dolphin](https://userbase.kde.org/Dolphin)'s Previews and Navigation"
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2019-12-apps-update/_index.md:46
msgid "KDE's powerful file browser [Dolphin](https://userbase.kde.org/Dolphin) adds new features to help you find and reach what you are looking for in your file system. One such feature is the redesigned advanced search options and another is that now you can go backwards and forwards in the history of places you have already visited multiple times by long-pressing the arrow icon in the toolbar. The feature that lets you quickly reach recently saved or recently accessed files has been reworked and its glitches ironed out."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2019-12-apps-update/_index.md:48
msgid "One of the main concerns of Dolphin's developers is to allow users to preview the contents of files before they open them. For example, in the new version of Dolphin you can preview GIFs by highlighting them and then hovering over the preview pane. You can also click and play videos and audio files in the preview pane."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2019-12-apps-update/_index.md:50
#, no-wrap
msgid "If you are a fan of graphic novels, Dolphin can now display thumbnails for .cb7 comic books (check out the support for this comic book format also in Okular -- see below). And, talking about thumbnails, zooming in on thumbnails has been a thing in Dolphin for a long time now: hold down <kbd>Ctrl</kbd>, spin the wheel and the thumbnail will grow or shrink. A new functionality is that now you can reset the zoom to the default level by hitting <kbd>Ctrl</kbd> + <kbd>0</kbd>.\n"
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2019-12-apps-update/_index.md:52
msgid "Another useful feature is that Dolphin shows you which programs are preventing a device from being unmounted."
msgid "[KDE Connect](https://community.kde.org/KDEConnect): Let your Phone Control your Desktop"
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2019-12-apps-update/_index.md:58
msgid "The latest version of [KDE Connect](https://community.kde.org/KDEConnect) comes stuffed with new features. One of the most noticeable is that there is a new SMS app that lets you read and write SMS with the full conversation history."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2019-12-apps-update/_index.md:60
msgid "A new [Kirigami](https://kde.org/products/kirigami/)-based user interface means you can run KDE Connect not only on Android, but also on all those mobile Linux platforms we'll be seeing in upcoming devices like the PinePhone and the Librem 5. The Kirigami interface also provides new features for desktop-to-desktop users, such as media control, remote input, device ringing, file transfer and running commands."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2019-12-apps-update/_index.md:62
#, no-wrap
msgid "{{<img src=\"kdeconnect2.png\" style=\"max-width: 600px\" caption=\"The new interface on desktop\" >}}\n"
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2019-12-apps-update/_index.md:64
msgid "You could already use KDE Connect to control the volume of media playing on your desktop, but now you can use it to also control your system's global volume from your phone -- super handy when using your phone as a remote. When giving a talk, you can also control your presentation using KDE Connect to flip forward and back through your slides."
msgid "Another feature that has been around for while is how you can use KDE Connect to send a file to your phone, but what's new in this version is that you can have your phone immediately open the file once it is received. KDE Itinerary uses this to send travel information to your phone from within KMail."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2019-12-apps-update/_index.md:70
msgid "In a related note, you can now also send files from Thunar (Xfce's file manager) and Elementary applications such as Pantheon Files. Displaying progress of the copy of multiple files has been improved a lot and files received from Android now show their correct modification time."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2019-12-apps-update/_index.md:72
msgid "When it comes to notifications, you can now trigger actions from Android notifications from the desktop and KDE Connect uses advanced features from Plasma's notification center to provide better notifications. The pairing confirmation notification does not time out so you can't miss it any more."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2019-12-apps-update/_index.md:74
msgid "Finally, if you are using KDE Connect from the command line, *kdeconnect-cli* now features improved *zsh* autocompletion."
msgid "[Gwenview](https://userbase.kde.org/Gwenview) now lets you adjust the JPEG compression level when you save images you have edited. Developers have also improved the performance for remote images and Gwenview can now import photos both to or from remote locations."
msgstr ""
#. type: Title ##
#. +> trunk5
#: content/2019-12-apps-update/_index.md:79
#, no-wrap
msgid "[Okular](https://kde.org/applications/office/org.kde.okular) support .cb7 format"
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2019-12-apps-update/_index.md:82
msgid "[Okular](https://kde.org/applications/office/org.kde.okular), the document viewer that lets you read, annotate and verify all sorts of documents, including PDFs, EPubs, ODTs and MDs, now also supports files using the .cb7 comic book format."
msgstr ""
#. type: Title ##
#. +> trunk5
#: content/2019-12-apps-update/_index.md:83
#, no-wrap
msgid "[Elisa](https://kde.org/applications/multimedia/org.kde.elisa): Simple but Complete Music Player"
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2019-12-apps-update/_index.md:86
msgid "[Elisa](https://kde.org/applications/multimedia/org.kde.elisa) is a KDE music player that combines simplicity with an elegant and modern interface. In its latest version, Elisa has optimized its looks to adapt better to High DPI screens. It also integrates better with other KDE applications and has acquired support for KDE's global menu system."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2019-12-apps-update/_index.md:88
msgid "Indexing music files has also improved and Elisa now supports web radios and ships with a few examples for you to try."
msgid "[Spectacle](https://kde.org/applications/utilities/org.kde.spectacle) is Touchscreen-Ready"
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2019-12-apps-update/_index.md:94
msgid "[Spectacle](https://kde.org/applications/utilities/org.kde.spectacle), KDE's default screen-grabbing program, is another KDE application that has evolved to acquire touchscreen capabilities: Its new touch-friendly drag handler makes it much easier to drag rectangles to capture the parts of the desktop you want on tactile-enabled devices."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2019-12-apps-update/_index.md:96
msgid "Other improvements are the new autosave function, which comes in handy for rapidly taking multiple screenshots, and the animated progress bars, which make sure you can clearly see what Spectacle is doing."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2019-12-apps-update/_index.md:98
#, no-wrap
msgid "{{<img style=\"max-width:500px\" src=\"spectacle.png\" caption=\"Spectacle new drag handler\" >}}\n"
msgid "The new release of [Plasma Browser Integration](https://community.kde.org/Plasma/Browser_Integration) now features a blacklist for the media controls functionality. This is useful for when you visit a site with a lot of media you can play, which can make it difficult to select what you want to control from your desktop. The blacklist lets you exclude these sites from the media controls."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2019-12-apps-update/_index.md:104
msgid "The new version also lets you keep the origin URL in file metadata and adds support for the Web Share API. The Web Share API lets browsers share links, text and files with other apps in the same way KDE apps do, improving the integration of non-native browsers like Firefox, Chrome/Chromium and Vivaldi, with the rest of KDE's applications."
msgid "Quite a few of KDE applications can be downloaded from the Microsoft Store. Krita and Okular have been there for a while, and they are joined now by [Kile](https://kde.org/applications/office/org.kde.kile), a user-friendly LaTeX editor."
msgid "Which brings us to new arrivals: [SubtitleComposer](https://invent.kde.org/kde/subtitlecomposer), an application that lets you easily create subtitles for videos, is now in the KDE Incubator, on track to become a full member of KDE's applications family. Welcome!"
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2019-12-apps-update/_index.md:118
msgid "Meanwhile, [plasma-nano](https://invent.kde.org/kde/plasma-nano), a minimal version of Plasma designed for embedded devices was moved into the Plasma repos ready for release with 5.18."
msgstr ""
#. type: Title ##
#. +> trunk5
#: content/2019-12-apps-update/_index.md:119
#, no-wrap
msgid "Release 19.12"
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2019-12-apps-update/_index.md:121
msgid "Some of our projects release on their own timescale and some get released en-masse. The 19.12 bundle of projects was released today and should be available through app stores and distros soon. See the [19.12 releases page](https://www.kde.org/announcements/releases/19.12). This bundle was previously called KDE Applications but has been de-branded to become a release service to avoid confusion with all the other applications by KDE and because it is dozens of different products rather than a single whole."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2020-01-apps-update/_index.md:3
msgid "title: KDE's January 2020 Apps Update"
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2020-01-apps-update/_index.md:5
msgid "publishDate: 2020-01-09 12:00:00"
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2020-01-apps-update/_index.md:14
msgid "The year is 2020, we are living in the future, let's see what KDE apps has brought us in the last month!"
msgstr ""
#. type: Title ##
#. +> trunk5
#: content/2020-01-apps-update/_index.md:15
#, no-wrap
msgid "KTimeTracker ported to KDE Frameworks 5"
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2020-01-apps-update/_index.md:21
msgid "The long-awaited modernized version of KTimeTracker is finally released. The application is a personal time tracker for busy people which is now available on Linux, FreeBSD and Windows. Over the course of 2019 it had been ported to Qt5 and KDE Frameworks after being unmaintained since around 2013."
msgid "The new version is also polished and slightly modernised with the most noticeable new features being the new Task Time Editing dialog and live preview in the Export dialog as seen in the picture below."
msgid "https://download.kde.org/stable/ktimetracker/5.0.1/src/ It is available through your Linux distro or as a [Windows installer](https://download.kde.org/stable/ktimetracker/5.0.1/win64/) and there's even [untested MacOS builds](https://binary-factory.kde.org/job/KTimeTracker_Nightly_macos/) built nightly."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2020-01-apps-update/_index.md:34
msgid "[The release is announced in the blog of the maintainer Alexander Potashev](https://aspotashev.blogspot.com/2019/12/ktimetracker-501-released.html)"
msgstr ""
#. type: Title ##
#. +> trunk5
#: content/2020-01-apps-update/_index.md:35
#, no-wrap
msgid "KStars 3.3.9"
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2020-01-apps-update/_index.md:38
msgid "Astronomy program [KStars got new features in 3.3.9](http://knro.blogspot.com/2020/01/kstars-v339-is-released.html)."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2020-01-apps-update/_index.md:40
msgid "Images can have fine changes in Shadows, Midtones, and Highlights allowing the faintest of stars to be seen."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2020-01-apps-update/_index.md:42
msgid "Alternative constellations from the Western Sky Culture which is fascinating to [read about](https://sternenkarten.com/2019/12/27/kstars-clines/)."
msgid "[KStars is available for](https://edu.kde.org/kstars/) Android, Windows, MacOS, Snap store and from your Linux distro."
msgstr ""
#. type: Title ##
#. +> trunk5
#: content/2020-01-apps-update/_index.md:47
#, no-wrap
msgid "Common Frameworks - KNewStuff"
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2020-01-apps-update/_index.md:50
msgid "Here on the Apps Update we focus on the apps rather than coding libraries. But new features in the common libraries will mean new features in all your apps :)"
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2020-01-apps-update/_index.md:52
msgid "This month saw a redesigned UI for KNewStuff, the framework to download addons for your applications. The browse and download dialog was redesigned and the comments section can now be filtered. It'll be appearing in all your apps and settings modules shortly starting with the Global Theme module in System Settings."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2020-01-apps-update/_index.md:54
#, no-wrap
msgid "{{< img src=\"knewstuff-comments.png\" caption=\"Filters on Comments\" alt=\"Filters on Comments\" style=\"width: 800px\">}}\n"
msgid "[KDevelop's monthly bugfix update 5.4.6](https://www.kdevelop.org/news/kdevelop-546-released) fixed a longstanding problem where the GPL and LGPL headers were mixed up, grab it from your distro or Appimage to make sure your licencing is correct."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2020-01-apps-update/_index.md:62
msgid "[Latte Dock 0.9.7](https://psifidotos.blogspot.com/2019/12/latte-bug-fix-release-v097.html) fixed some features with Qt 5.14 and removed some crashes."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2020-01-apps-update/_index.md:64
msgid "Dolphin Plugins 19.12.1 fixed a broken SVN Commit dialog."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2020-01-apps-update/_index.md:66
msgid "There was improved file indexing in Elisa. It also fixed some compilation issues on Android and without Baloo."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2020-01-apps-update/_index.md:68
msgid "The new release of KPat was declaired to have no [OARS](https://hughsie.github.io/oars/index.html) relevant age restrictions."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2020-01-apps-update/_index.md:70
msgid "Okular fixed a crash when closing the print preview dialog."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2020-01-apps-update/_index.md:72
msgid "This month's release of Kdenlive video editor had an impressive number of fixes best of all was updating the [screenshots](https://kde.org/applications/multimedia/org.kde.kdenlive) used in the meta info. It also has dozens of improvements and fixes in timeline and preview handling."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2020-01-apps-update/_index.md:74
msgid "New JavaScript support is now in Kate's [LSP](https://langserver.org/) client."
msgstr ""
#. type: Title ##
#. +> trunk5
#: content/2020-01-apps-update/_index.md:75
#, no-wrap
msgid "Enjoy KDE on the Flathub Store"
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2020-01-apps-update/_index.md:78
msgid "KDE is embracing all the app stores. We can now deliver more and more of our programs directly to you the user. One of the leading app stores on Linux is [Flathub](https://flathub.org/home) which uses the FlatPak format."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2020-01-apps-update/_index.md:80
msgid "You may well already have Flatpak and Flathub configured on your system and ready to use in Discover or other app installers. For example KDE neon has set it up by default on installs for over a year now. If not it's a quick [setup process](https://flatpak.org/setup/) for all the major distros."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2020-01-apps-update/_index.md:82
msgid "If you're interested in the techy details you can browse [KDE's Flatpak packaging repo](https://phabricator.kde.org/source/flatpak-kde-applications/) and read the [KDE Flatpak guide](https://community.kde.org/Guidelines_and_HOWTOs/Flatpak)."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2020-01-apps-update/_index.md:84
msgid "But probably what you're interested in is the apps so take a look at what the [Flathub store has under KDE](https://flathub.org/apps/search/kde)."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2020-01-apps-update/_index.md:86
#, no-wrap
msgid "{{< img src=\"flathub.png\" alt=\"KDE on Flathub\" style=\"width: 800px\" >}}\n"
msgstr ""
#. type: Title ##
#. +> trunk5
#: content/2020-01-apps-update/_index.md:87
#, no-wrap
msgid "LabPlot now on Chocolatey"
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2020-01-apps-update/_index.md:90
msgid "[Chocolatey](https://chocolatey.org/) is a package manager for Windows. If you want full control over what software is installed on your Windows machine or whole office of machines then Chocolatey gives you easy control over that just like you are used to on Linux."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2020-01-apps-update/_index.md:92
msgid "[LabPlot](https://chocolatey.org/packages/labplot) is KDE's app for interactive graphing and analysis of scientific data and it is now available through Chocolatey. Give it a try!"
msgid "{{< img src=\"labplot.png\" alt=\"LabPlot on Chocolatey\" style=\"width: 800px\" >}}\n"
msgstr ""
#. type: Title #
#. +> trunk5
#: content/2020-01-apps-update/_index.md:97
#: content/2020-02-apps-update/_index.md:69
#, no-wrap
msgid "Website Updates"
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2020-01-apps-update/_index.md:100
msgid "The recently revived KDE Web Team has been updating a bunch of our older themed sites. The newly relaunched [KPhotoAlbum](https://www.kphotoalbum.org/) website is a lovely example, updated and refreshed for our photo storage and search app."
msgid "And if you want to show off a simple to use but full featured local music player but were ashamed by the old looking website, [JuK](https://juk.kde.org/) has just had an updated website too."
msgstr ""
#. type: Title ##
#. +> trunk5
#: content/2020-01-apps-update/_index.md:105
#, no-wrap
msgid "Releases 19.12.1"
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2020-01-apps-update/_index.md:107
msgid "Some of our projects release on their own timescale and some get released en-masse. The 19.12.1 bundle of projects was released today and should be available through app stores and distros soon. See the [19.12.1 releases page](https://www.kde.org/info/releases-19.12.1.php). This bundle was previously called KDE Applications but has been de-branded to become a release service to avoid confusion with all the other applications by KDE and because it is dozens of different products rather than a single whole."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2020-02-apps-update/_index.md:3
msgid "title: KDE's February 2020 Apps Update"
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2020-02-apps-update/_index.md:5
msgid "publishDate: 2020-02-06 12:00:00"
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2020-02-apps-update/_index.md:14
msgid "This month sees a plethora of bugfix releases. While we all might like new features, we know that people love when mistakes and crashes get tidied up and solved too!"
msgstr ""
#. type: Title #
#. +> trunk5
#: content/2020-02-apps-update/_index.md:15
#, no-wrap
msgid "New releases"
msgstr ""
#. type: Title ##
#. +> trunk5
#: content/2020-02-apps-update/_index.md:17
#, no-wrap
msgid "KDevelop 5.5"
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2020-02-apps-update/_index.md:20
msgid "The big release this month comes from [KDevelop 5.5](https://www.kdevelop.org/news/kdevelop-550-released), the IDE that makes writing programs in C++, Python and PHP easier. We have fixed a bunch of bugs and tidied up a lot of KDevelop's code. We added Lambda init captures in C++, configurable predefined checkset selections are now in for Clazy-tidy and Clang, and look-ahead completion now tries harder. PHP gets PHP 7.4's typed properties and support was added for array of type and class constant visibility. In Python, support has now been added for Python 3.8."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2020-02-apps-update/_index.md:22
msgid "KDevelop is available from your Linux distro or as an AppImage."
msgid "[Zanshin](https://zanshin.kde.org/) is our TODO list tracker which integrates with Kontact. Recent releases of Kontact had broken Zanshin and users were left not knowing what tasks to carry out next. But this month, a release was made to [get it working again](https://jriddell.org/2020/01/14/zanshin-0-5-71/). We can now all easily find the tasks that we need to get on with!"
msgid "[Okteta](https://kde.org/applications/utilities/org.kde.okteta), KDE's Hex editor, had a bugfix release and includes a new feature: a CRC-64 algorithm for the checksum tool. Okteta also updates the code for new Qt and KDE Frameworks."
msgid "[KMyMoney](https://kmymoney.org/), the KDE app that helps you manage your finances, [included several bugfixes](https://kmymoney.org/changelogs/kmymoney-5-0-8-release-notes.html) and an enhancement that added support for check forms with split protocol"
msgid "Keysmith is a two-factor code generator for Plasma Mobile and Plasma Desktop that uses oath-toolkit. The user interface is written in the Kirigami, making it slick on any size of screen. Expect releases soon."
msgid "[Chocolatey](https://chocolatey.org) is a package manager for the Windows operating system. Chocolatey deals with installing and updating all the software on the system and can make the life smoother for Windows users."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2020-02-apps-update/_index.md:66
msgid "[KDE has an account on Chocolatey](https://chocolatey.org/profiles/KDE) and you can install Digikam, Krita, KDevelop and Kate through it. Installation is very easy: All you have to do is `choco install kdevelop` and Chocolatey will do the rest. Chocolatey maintainers have high standards so you can be sure the packages are tested and secure."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2020-02-apps-update/_index.md:68
msgid "If you are a KDE app maintainer, do consider getting your app added, and if you're a large Windows rollout manager, do consider this for your installs."
"Our web team continues to update our online presence and has recently refreshed the [KMyMoney website](https://kmymoney.org).\n"
msgstr ""
#. type: Title #
#. +> trunk5
#: content/2020-02-apps-update/_index.md:74
#, no-wrap
msgid "Releases 19.12.2"
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2020-02-apps-update/_index.md:77
msgid "Some of our projects release on their own timescale and some get released en-masse. The 19.12.2 bundle of projects was released today and should be available through app stores and distros soon. See the [19.12.2 releases page](https://www.kde.org/info/releases-19.12.2.php) for details. This bundle was previously called KDE Applications but has been de-branded to become a release service to avoid confusion with all the other applications by KDE and because there are dozens of different products rather than a single whole."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2020-02-apps-update/_index.md:79
msgid "Some of the fixes included in this release are:"
msgstr ""
#. type: Bullet: '* '
#. +> trunk5
#: content/2020-02-apps-update/_index.md:84
msgid "The [Elisa](https://kde.org/applications/multimedia/org.kde.elisa) music player now handles files that do not contain any metadata"
msgstr ""
#. type: Bullet: '* '
#. +> trunk5
#: content/2020-02-apps-update/_index.md:84
msgid "Attachments saved in the *Draft* folder no longer disappear when reopening a message for editing in [KMail](https://kde.org/applications/internet/org.kde.kmail2)"
msgstr ""
#. type: Bullet: '* '
#. +> trunk5
#: content/2020-02-apps-update/_index.md:84
msgid "A timing issue that could cause the [Okular](https://kde.org/applications/office/org.kde.okular) document viewer to stop rendering has been fixed"
msgstr ""
#. type: Bullet: '* '
#. +> trunk5
#: content/2020-02-apps-update/_index.md:84
msgid "The [Umbrello](https://umbrello.kde.org/) UML designer now comes with an improved Java import"
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2020-02-apps-update/_index.md:86
msgid "[19.12.2 release notes](https://community.kde.org/Releases/19.12_Release_Notes) • [Package download wiki page](https://community.kde.org/Get_KDE_Software_on_Your_Linux_Distro) • [19.12.2 source info page](https://kde.org/info/releases-19.12.2) • [19.12.2 full changelog](https://kde.org/announcements/changelog-releases.php?version=19.12.2)"
msgstr ""
#. type: Title #
#. +> trunk5
#: content/2020-02-apps-update/_index.md:87
#, no-wrap
msgid "Stores"
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2020-02-apps-update/_index.md:89
msgid "KDE software is available on many platforms and software app stores."