"Hue and saturation values of default foreground and background colors are randomized by default. Some color schemes might use different randomization settings.\n"
"To see any effect, set colors with saturation value greater than 0."
msgid "Dim the colors when the window loses focus"
msgstr ""
#. +> trunk5 stable5
#: EditProfileDialog.cpp:83
#, kde-format
msgid "Edit Profile"
msgstr ""
#. +> trunk5 stable5
#: EditProfileDialog.cpp:114
#, kde-format
msgctxt "@title:tab Generic, common options"
msgid "General"
msgstr ""
#. +> trunk5 stable5
#: EditProfileDialog.cpp:125
#, kde-format
msgid "Tabs"
msgstr ""
#. +> trunk5 stable5
#: EditProfileDialog.cpp:143
#, kde-format
msgid "Appearance"
msgstr ""
#. +> trunk5 stable5
#: EditProfileDialog.cpp:161
#, kde-format
msgid "Scrolling"
msgstr ""
#. +> trunk5 stable5
#: EditProfileDialog.cpp:176
#, kde-format
msgid "Keyboard"
msgstr ""
#. +> trunk5 stable5
#: EditProfileDialog.cpp:177
#, kde-format
msgid "Key bindings"
msgstr ""
#. +> trunk5 stable5
#: EditProfileDialog.cpp:189
#, kde-format
msgid "Mouse"
msgstr ""
#. +> trunk5 stable5
#: EditProfileDialog.cpp:201
#, kde-format
msgctxt "@title:tab Complex options"
msgid "Advanced"
msgstr ""
#. +> trunk5 stable5
#: EditProfileDialog.cpp:299
#, kde-format
msgid ""
"<p>Konsole does not have permission to save this profile to:<br />"
" \"%1\"</p>"
"<p>To be able to save settings you can either change the permissions of the profile configuration file or change the profile name to save the settings to a new profile.</p>"
msgstr ""
#. +> trunk5 stable5
#: EditProfileDialog.cpp:320
#, kde-format
msgid "<p>Each profile must have a name before it can be saved into disk.</p>"
msgstr ""
#. +> trunk5 stable5
#: EditProfileDialog.cpp:328
#, kde-format
msgid "<p>A profile with this name already exists.</p>"
msgstr ""
#. +> trunk5 stable5
#: EditProfileDialog.cpp:362
#, kde-format
msgid "Editing profile: %2"
msgid_plural "Editing %1 profiles: %2"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: EditProfileDialog.cpp:367
#, kde-format
msgid "Edit Profile \"%1\""
msgstr ""
#. +> trunk5 stable5
#: EditProfileDialog.cpp:455
#, kde-format
msgctxt "Suffix of the number of columns (N columns)"
msgid " column"
msgid_plural " columns"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: EditProfileDialog.cpp:456
#, kde-format
msgctxt "Suffix of the number of rows (N rows)"
msgid " row"
msgid_plural " rows"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: EditProfileDialog.cpp:508
#, kde-format
msgid "Edit Environment"
msgstr ""
#. +> trunk5 stable5
#: EditProfileDialog.cpp:509
#, kde-format
msgid "One environment variable per line"
msgstr ""
#. +> trunk5 stable5
#: EditProfileDialog.cpp:540
#, kde-format
msgctxt "Unit of time"
msgid " second"
msgid_plural " seconds"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: EditProfileDialog.cpp:623
#, kde-format
msgid "Select Initial Directory"
msgstr ""
#. +> trunk5 stable5
#: EditProfileDialog.cpp:1151
#, kde-kuit-format
msgctxt "@info"
msgid "Scheme <resource>%1</resource> failed to load."
msgstr ""
#. +> trunk5 stable5
#: EditProfileDialog.cpp:1336
#, kde-format
msgid "This color scheme uses a transparent background which does not appear to be supported on your desktop"
msgstr ""
#. +> trunk5 stable5
#: EditProfileDialog.cpp:1342
#, kde-format
msgid "Konsole was started before desktop effects were enabled. You need to restart Konsole to see transparent background."
"<p><span style=\" font-style:italic;\">Settings → Configure Konsole → General → Remember window size</span> must be disabled for these entries to work.</p>"
msgid "Key bindings control how combinations of keystrokes in the terminal window are converted into the stream of characters that is then sent to the current terminal program. For more information on how to customize the key bindings check the Konsole Handbook."
msgid "The threshold for continuous silence to be detected by Konsole"
msgstr ""
#. +> trunk5 stable5
#: Filter.cpp:489
#, kde-format
msgid "Open Link"
msgstr ""
#. +> trunk5 stable5
#: Filter.cpp:491
#, kde-format
msgid "Copy Link Address"
msgstr ""
#. +> trunk5 stable5
#: Filter.cpp:494
#, kde-format
msgid "Send Email To..."
msgstr ""
#. +> trunk5 stable5
#: Filter.cpp:496
#, kde-format
msgid "Copy Email Address"
msgstr ""
#. +> trunk5 stable5
#: Filter.cpp:635
#, kde-format
msgid "Open File"
msgstr ""
#. +> trunk5 stable5
#: FontDialog.cpp:38
#, kde-format
msgctxt "@title:window"
msgid "Select font"
msgstr ""
#. +> trunk5 stable5
#: FontDialog.cpp:41
#, kde-format
msgctxt "@action:button"
msgid "Show all fonts"
msgstr ""
#. +> trunk5 stable5
#: FontDialog.cpp:61
#, kde-format
msgctxt "@info:status"
msgid "By its very nature, a terminal program requires font characters that are equal width (monospace). Any non monospaced font may cause display issues. This should not be necessary except in rare cases."
msgstr ""
#. +> trunk5 stable5
#: HistorySizeDialog.cpp:39
#, kde-format
msgctxt "@title:window"
msgid "Adjust Scrollback"
msgstr ""
#. +> trunk5 stable5
#: HistorySizeDialog.cpp:61
#, kde-format
msgctxt "@info:status"
msgid "Any adjustments are only temporary to this session."
msgstr ""
#. +> trunk5 stable5
#: HistorySizeWidget.cpp:57
#, kde-format
msgctxt "@label:textbox Unit of scrollback"
msgid " line"
msgid_plural " lines"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: HistorySizeWidget.cpp:72
#, kde-format
msgctxt "@info:whatsthis"
msgid "When using this option, the scrollback data will be saved to RAM. If you choose a huge value, your system may run out of free RAM and cause serious issues with your system."
msgstr ""
#. +> trunk5 stable5
#: HistorySizeWidget.cpp:81
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid ""
"When using this option, the scrollback data will be written unencrypted to temporary files. Those temporary files will be deleted automatically when Konsole is closed in a normal manner.<nl/>"
"Use <emphasis>Settings → Configure Konsole → File Location</emphasis> to select the location of the temporary files."
msgid "Tab title format used when a remote command (e.g. connection to another computer via SSH) is being executed"
msgstr ""
#. +> trunk5 stable5
#: SaveHistoryTask.cpp:81
#, kde-format
msgid "Save Output From %1"
msgstr ""
#. +> trunk5 stable5
#: SaveHistoryTask.cpp:93
#, kde-format
msgid "%1 is an invalid URL, the output could not be saved."
msgstr ""
#. +> trunk5 stable5
#: SaveHistoryTask.cpp:175
#, kde-format
msgid ""
"A problem occurred when saving the output.\n"
"%1"
msgstr ""
#. +> trunk5 stable5
#: schemas.cpp:1
#, kde-format
msgid "Black on Light Yellow"
msgstr ""
#. +> trunk5 stable5
#: schemas.cpp:2
#, kde-format
msgid "Black on Random Light"
msgstr ""
#. +> trunk5 stable5
#: schemas.cpp:3
#, kde-format
msgid "Black on White"
msgstr ""
#. +> trunk5 stable5
#: schemas.cpp:4
#, kde-format
msgid "Blue on Black"
msgstr ""
#. +> trunk5 stable5
#: schemas.cpp:5
#, kde-format
msgid "Breeze"
msgstr ""
#. +> trunk5 stable5
#: schemas.cpp:6
#, kde-format
msgid "Dark Pastels"
msgstr ""
#. +> trunk5 stable5
#: schemas.cpp:7
#, kde-format
msgid "Green on Black"
msgstr ""
#. +> trunk5 stable5
#: schemas.cpp:8
#, kde-format
msgid "Linux Colors"
msgstr ""
#. +> trunk5 stable5
#: schemas.cpp:9
#, kde-format
msgid "Red on Black"
msgstr ""
#. +> trunk5 stable5
#: schemas.cpp:10
#, kde-format
msgid "Solarized"
msgstr ""
#. +> trunk5 stable5
#: schemas.cpp:11
#, kde-format
msgid "Solarized Light"
msgstr ""
#. +> trunk5 stable5
#: schemas.cpp:12
#, kde-format
msgid "White on Black"
msgstr ""
#. +> trunk5 stable5
#: schemas.cpp:13
#, kde-format
msgid "Default (XFree 4)"
msgstr ""
#. +> trunk5 stable5
#: schemas.cpp:14
#, kde-format
msgid "Linux console"
msgstr ""
#. +> trunk5 stable5
#: schemas.cpp:15
#, kde-format
msgid "Solaris console"
msgstr ""
#. +> trunk5 stable5
#: Session.cpp:390
#, kde-format
msgid "Could not find binary: "
msgstr ""
#. +> trunk5 stable5
#: Session.cpp:399
#, kde-format
msgctxt "@info:shell Alert the user with red color text"
msgid "Warning: "
msgstr ""
#. +> trunk5 stable5
#: Session.cpp:457
#, kde-format
msgid "Could not find '%1', starting '%2' instead. Please check your profile settings."
msgstr ""
#. +> trunk5 stable5
#: Session.cpp:460
#, kde-format
msgid "Could not find an interactive shell to start."
msgstr ""
#. +> trunk5 stable5
#: Session.cpp:498
#, kde-format
msgid "Could not start program '%1' with arguments '%2'."
msgstr ""
#. +> trunk5 stable5
#: Session.cpp:634
#, kde-format
msgid "Silence in session '%1'"
msgstr ""
#. +> trunk5 stable5
-#: Session.cpp:694
+#: Session.cpp:698
#, kde-format
msgid "Bell in session '%1'"
msgstr ""
#. +> trunk5 stable5
-#: Session.cpp:707
+#: Session.cpp:711
#, kde-format
msgid "Activity in session '%1'"
msgstr ""
#. +> trunk5 stable5
-#: Session.cpp:918
+#: Session.cpp:932
#, kde-format
msgid ""
"The D-Bus methods sendText/runCommand were just used. There are security concerns about allowing these methods to be public. If desired, these methods can be changed to internal use only by re-compiling Konsole. "
"<p>This warning will only show once for this Konsole instance.</p>"
msgstr ""
#. +> trunk5 stable5
-#: Session.cpp:946
+#: Session.cpp:960
#, kde-format
msgctxt "@info:shell This session is done"
msgid "Finished"
msgstr ""
#. +> trunk5 stable5
-#: Session.cpp:960 Session.cpp:973
+#: Session.cpp:974 Session.cpp:987
#, kde-format
msgid "Program '%1' crashed."
msgstr ""
#. +> trunk5 stable5
-#: Session.cpp:962
+#: Session.cpp:976
#, kde-format
msgid "Program '%1' exited with status %2."
msgstr ""
#. +> trunk5 stable5
-#: Session.cpp:1405
+#: Session.cpp:1419
#, kde-format
msgid "ZModem Progress"
msgstr ""
#. +> trunk5 stable5
#: SessionController.cpp:132
#, kde-format
msgid "Konsole"
msgstr ""
#. +> trunk5 stable5
-#: SessionController.cpp:372
+#: SessionController.cpp:375
#, kde-format
msgid "Konsole does not know how to open the bookmark: "
msgstr ""
#. +> trunk5 stable5
-#: SessionController.cpp:432
+#: SessionController.cpp:435
#, kde-format
msgid "Search for '%1' with"
msgstr ""
#. +> trunk5 stable5
-#: SessionController.cpp:446
+#: SessionController.cpp:449
#, kde-format
msgid "Configure Web Shortcuts..."
msgstr ""
#. +> trunk5 stable5
-#: SessionController.cpp:555
+#: SessionController.cpp:564
#, kde-format
msgid "&Close Session"
msgstr ""
#. +> trunk5 stable5
-#: SessionController.cpp:562
+#: SessionController.cpp:571
#, kde-format
msgid "Open File Manager"
msgstr ""
#. +> trunk5 stable5
-#: SessionController.cpp:589
+#: SessionController.cpp:598
#, kde-format
msgid "Paste Selection"
msgstr ""
#. +> trunk5 stable5
-#: SessionController.cpp:596
+#: SessionController.cpp:605
#, kde-format
msgid "Web Search"
msgstr ""
#. +> trunk5 stable5
-#: SessionController.cpp:603
+#: SessionController.cpp:612
#, kde-format
msgid "&Select All"
msgstr ""
#. +> trunk5 stable5
-#: SessionController.cpp:607
+#: SessionController.cpp:616
#, kde-format
msgid "Select &Line"
msgstr ""
#. +> trunk5 stable5
-#: SessionController.cpp:610
+#: SessionController.cpp:619
#, kde-format
msgid "Save Output &As..."
msgstr ""
#. +> trunk5 stable5
-#: SessionController.cpp:616
+#: SessionController.cpp:625
#, kde-format
msgid "&Print Screen..."
msgstr ""
#. +> trunk5 stable5
-#: SessionController.cpp:620
+#: SessionController.cpp:629
#, kde-format
msgid "Adjust Scrollback..."
msgstr ""
#. +> trunk5 stable5
-#: SessionController.cpp:624
+#: SessionController.cpp:633
#, kde-format
msgid "Clear Scrollback"
msgstr ""
#. +> trunk5 stable5
-#: SessionController.cpp:628
+#: SessionController.cpp:637
#, kde-format
msgid "Clear Scrollback and Reset"
msgstr ""
#. +> trunk5 stable5
-#: SessionController.cpp:634
+#: SessionController.cpp:643
#, kde-format
msgid "Edit Current Profile..."
msgstr ""
#. +> trunk5 stable5
-#: SessionController.cpp:637
+#: SessionController.cpp:646
#, kde-format
msgid "Switch Profile"
msgstr ""
#. +> trunk5 stable5
-#: SessionController.cpp:661
+#: SessionController.cpp:670
#, kde-format
msgid "Set &Encoding"
msgstr ""
#. +> trunk5 stable5
-#: SessionController.cpp:671
+#: SessionController.cpp:680
#, kde-format
msgctxt "@item:inmenu A read only (locked) session"
msgid "Read-only"
msgstr ""
#. +> trunk5 stable5
-#: SessionController.cpp:682
+#: SessionController.cpp:691
#, kde-format
msgid "&Rename Tab..."
msgstr ""
#. +> trunk5 stable5
-#: SessionController.cpp:688
+#: SessionController.cpp:697
#, kde-format
msgid "&All Tabs in Current Window"
msgstr ""
#. +> trunk5 stable5
-#: SessionController.cpp:695
+#: SessionController.cpp:704
#, kde-format
msgid "&Select Tabs..."
msgstr ""
#. +> trunk5 stable5
-#: SessionController.cpp:701
+#: SessionController.cpp:710
#, kde-format
msgctxt "@action:inmenu Do not select any tabs"
msgid "&None"
msgstr ""
#. +> trunk5 stable5
-#: SessionController.cpp:709
+#: SessionController.cpp:718
#, kde-format
msgid "Copy Input To"
msgstr ""
#. +> trunk5 stable5
-#: SessionController.cpp:718
+#: SessionController.cpp:727
#, kde-format
msgid "&ZModem Upload..."
msgstr ""
#. +> trunk5 stable5
-#: SessionController.cpp:723
+#: SessionController.cpp:732
#, kde-format
msgid "Monitor for &Activity"
msgstr ""
#. +> trunk5 stable5
-#: SessionController.cpp:728
+#: SessionController.cpp:737
#, kde-format
msgid "Monitor for &Silence"
msgstr ""
#. +> trunk5 stable5
-#: SessionController.cpp:735
+#: SessionController.cpp:744
#, kde-format
msgid "Enlarge Font"
msgstr ""
#. +> trunk5 stable5
-#: SessionController.cpp:743
+#: SessionController.cpp:752
#, kde-format
msgid "Shrink Font"
msgstr ""
#. +> trunk5 stable5
-#: SessionController.cpp:748
+#: SessionController.cpp:757
#, kde-format
msgid "Reset Font Size"
msgstr ""
#. +> trunk5 stable5
-#: SessionController.cpp:753
+#: SessionController.cpp:762
#, kde-format
msgid "Send Signal"
msgstr ""
#. +> trunk5 stable5
-#: SessionController.cpp:759
+#: SessionController.cpp:768
#, kde-format
msgid "&Suspend Task"
msgstr ""
#. +> trunk5 stable5
-#: SessionController.cpp:764
+#: SessionController.cpp:773
#, kde-format
msgid "&Continue Task"
msgstr ""
#. +> trunk5 stable5
-#: SessionController.cpp:769
+#: SessionController.cpp:778
#, kde-format
msgid "&Hangup"
msgstr ""
#. +> trunk5 stable5
-#: SessionController.cpp:774
+#: SessionController.cpp:783
#, kde-format
msgid "&Interrupt Task"
msgstr ""
#. +> trunk5 stable5
-#: SessionController.cpp:779
+#: SessionController.cpp:788
#, kde-format
msgid "&Terminate Task"
msgstr ""
#. +> trunk5 stable5
-#: SessionController.cpp:784
+#: SessionController.cpp:793
#, kde-format
msgid "&Kill Task"
msgstr ""
#. +> trunk5 stable5
-#: SessionController.cpp:789
+#: SessionController.cpp:798
#, kde-format
msgid "User Signal &1"
msgstr ""
#. +> trunk5 stable5
-#: SessionController.cpp:794
+#: SessionController.cpp:803
#, kde-format
msgid "User Signal &2"
msgstr ""
#. +> trunk5 stable5
-#: SessionController.cpp:909
+#: SessionController.cpp:918
#, kde-format
msgid "A program is currently running in this session. Are you sure you want to close it?"
msgstr ""
#. +> trunk5 stable5
-#: SessionController.cpp:912
+#: SessionController.cpp:921
#, kde-format
msgid "The program '%1' is currently running in this session. Are you sure you want to close it?"
"<p>Applications that use KonsolePart share profiles.</p>"
"<p>They do not share with Konsole or other applications:"
"<ul>"
"<li>default profile</li>"
"<li>show in menu</li>"
"<li>shortcuts</li>"
"</ul>"
"</p>"
"<p>Feel free to open a Konsole <a href=\"https://bugs.kde.org/enter_bug.cgi?format=guided&product=konsole&component=kpart\">bug report</a> if you desire a change to how these are handled.</body></html>"
msgstr ""
#. +> trunk5 stable5
#: settings/ProfileSettings.cpp:93
#, kde-format
msgctxt "@info:tooltip"
msgid "Double click to change shortcut"
msgstr ""
#. +> trunk5 stable5
#: settings/ProfileSettings.cpp:96
#, kde-format
msgctxt "@info:tooltip"
msgid "Shortcut won't work while the profile is not marked as visible."
msgid "Profiles marked as visible will appear in context and File menu. A shortcut for creating a new tab can be assigned to each entry. However, only shortcuts of visible profiles will work."
msgid "Are you sure you want to paste %1 character?"
msgid_plural "Are you sure you want to paste %1 characters?"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
-#: TerminalDisplay.cpp:3153
+#: TerminalDisplay.cpp:3158
#, kde-format
msgid "Confirm Paste"
msgstr ""
-#. +> trunk5
+#. +> stable5
#: TerminalDisplay.cpp:3185
#, kde-format
-msgid "End Of Text/Interrupt: may exit the current process"
+msgid "^S Scroll lock: Locks terminal output"
msgstr ""
-#. +> stable5
-#: TerminalDisplay.cpp:3173
+#. +> trunk5
+#: TerminalDisplay.cpp:3190
#, kde-format
-msgid "^C Interrupt: May abort the current process"
+msgid "End Of Text/Interrupt: may exit the current process"
msgstr ""
#. +> stable5
-#: TerminalDisplay.cpp:3185
+#: TerminalDisplay.cpp:3173
#, kde-format
-msgid "^S Scroll lock: Locks terminal output"
+msgid "^C Interrupt: May abort the current process"
msgstr ""
#. +> trunk5
-#: TerminalDisplay.cpp:3186
+#: TerminalDisplay.cpp:3191
#, kde-format
msgid "End Of Transmission: may exit the current process"
msgstr ""
#. +> stable5
#: TerminalDisplay.cpp:3176
#, kde-format
msgid "^D End of transmission: May exit the current process"
msgstr ""
+#. +> stable5
+#: TerminalDisplay.cpp:3191
+#, kde-format
+msgid "ESC: Used for special commands to the current process"
+msgstr ""
+
#. +> trunk5
-#: TerminalDisplay.cpp:3187
+#: TerminalDisplay.cpp:3192
#, kde-format
msgid "Bell: will try to emit an audible warning"
msgstr ""
#. +> stable5
#: TerminalDisplay.cpp:3179
#, kde-format
msgid "^G Bell: Will try to emit an audible warning"
msgstr ""
#. +> trunk5
-#: TerminalDisplay.cpp:3188
+#: TerminalDisplay.cpp:3193
#, kde-format
msgid "Backspace"
msgstr ""
#. +> stable5
#: TerminalDisplay.cpp:3182
#, kde-format
msgid "^H Backspace"
msgstr ""
#. +> trunk5
-#: TerminalDisplay.cpp:3189
+#: TerminalDisplay.cpp:3194
#, kde-format
msgid "Device Control Three/XOFF: suspends output"
msgstr ""
+#. +> stable5
+#: TerminalDisplay.cpp:3194
+#, kde-format
+msgid "Other unprintable character (\\x%1)"
+msgstr ""
+
#. +> trunk5
-#: TerminalDisplay.cpp:3190
+#: TerminalDisplay.cpp:3195
#, kde-format
msgid "Substitute/Suspend: may suspend current process"
msgstr ""
#. +> stable5
#: TerminalDisplay.cpp:3188
#, kde-format
msgid "^Z Suspend: Stops current process"
msgstr ""
#. +> trunk5
-#: TerminalDisplay.cpp:3191
+#: TerminalDisplay.cpp:3196
#, kde-format
msgid "Escape: used for manipulating terminal state"
msgstr ""
-#. +> stable5
-#: TerminalDisplay.cpp:3191
-#, kde-format
-msgid "ESC: Used for special commands to the current process"
-msgstr ""
-
#. +> trunk5
-#: TerminalDisplay.cpp:3192
+#: TerminalDisplay.cpp:3197
#, kde-format
msgid "File Separator/Quit: may abort the current process"
msgstr ""
-#. +> stable5
-#: TerminalDisplay.cpp:3194
-#, kde-format
-msgid "Other unprintable character (\\x%1)"
-msgstr ""
-
#. +> trunk5
-#: TerminalDisplay.cpp:3214
+#: TerminalDisplay.cpp:3219
#, kde-format
msgid "The text you're trying to paste contains hidden control characters, do you want to filter them out?"
msgstr ""
#. +> stable5
#: TerminalDisplay.cpp:3204
#, kde-format
msgid "The text you're trying to paste contains hidden unprintable characters, do you want to filter them out?"
msgstr ""
#. +> trunk5
-#: TerminalDisplay.cpp:3217
+#: TerminalDisplay.cpp:3222
#, kde-format
msgctxt "@title"
msgid "Confirm Paste"
msgstr ""
#. +> stable5
#: TerminalDisplay.cpp:3207
#, kde-format
msgctxt "@title"
msgid "Filter"
msgstr ""
#. +> trunk5
-#: TerminalDisplay.cpp:3219
+#: TerminalDisplay.cpp:3224
#, kde-format
msgctxt "@action:button"
msgid "Paste &without control characters"
msgstr ""
#. +> trunk5
-#: TerminalDisplay.cpp:3222
+#: TerminalDisplay.cpp:3227
#, kde-format
msgctxt "@action:button"
msgid "&Paste everything"
msgstr ""
#. +> trunk5
-#: TerminalDisplay.cpp:3225
+#: TerminalDisplay.cpp:3230
#, kde-format
msgctxt "@action:button"
msgid "&Cancel"
msgstr ""
#. +> stable5
#: TerminalDisplay.cpp:3209
#, kde-format
msgctxt "@action:button"
msgid "&Remove unprintable"
msgstr ""
#. +> stable5
#: TerminalDisplay.cpp:3212
#, kde-format
msgctxt "@action:button"
msgid "Confirm &paste"
msgstr ""
#. +> stable5
#: TerminalDisplay.cpp:3215
#, kde-format
msgctxt "@action:button"
msgid "&Cancel paste"
msgstr ""
#. +> trunk5 stable5
-#: TerminalDisplay.cpp:3472
+#: TerminalDisplay.cpp:3477
#, kde-format
msgid "<qt>Output has been <a href=\"https://en.wikipedia.org/wiki/Software_flow_control\">suspended</a> by pressing Ctrl+S. Press <b>Ctrl+Q</b> to resume.</qt>"
"If you want to modify the template, create a new project using this template and save it using <interface>File->Create Project Template...</interface>."
msgid "%1 resource requested for dynamic allocation"
msgid_plural "%1 resources requested for dynamic allocation"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: models/GroupAllocationItemModel.cpp:479
#, kde-format
msgctxt "@info:tooltip"
msgid "%1 resource allocated"
msgid_plural "%1 resources allocated"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: models/GroupAllocationItemModel.cpp:483
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid ""
"%1<nl/>"
"%2"
msgstr ""
#. +> trunk5 stable5
#: models/GroupAllocationItemModel.cpp:487
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Group allocations</title>"
"<para>You can allocate a number of resources from a group and let the scheduler select from the available resources at the time of scheduling.</para>"
" These dynamically allocated resources will be in addition to any resource you have allocated specifically."
msgstr ""
#. +> trunk5 stable5
#: models/GroupAllocationItemModel.cpp:526
#, kde-format
msgctxt "1: free resources, 2: number of resources"
msgid "%1 of %2"
msgstr ""
#. +> trunk5 stable5
#: models/GroupAllocationItemModel.cpp:529
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "There is %1 resource available in this group"
msgid_plural "There are %1 resources available in this group"
msgid "Defines when the resource is available to the project"
msgstr ""
#. +> trunk5 stable5
#: models/kptcommonstrings.cpp:123
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "The cost pr hour, normal hours"
msgstr ""
#. +> trunk5 stable5
#: models/kptcommonstrings.cpp:124
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "The cost pr hour, overtime hours"
msgstr ""
#. +> trunk5 stable5
#: models/kptcommonstrings.cpp:125
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "The fixed cost"
msgstr ""
#. +> trunk5 stable5
#: models/kptcommonstrings.cpp:126
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "The account where the resource cost is accumulated"
msgstr ""
#. +> trunk5 stable5
#: models/kptcommonstrings.cpp:128
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "The name of the account"
msgstr ""
#. +> trunk5 stable5
#: models/kptcommonstrings.cpp:129
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "The description of the account"
msgstr ""
#. +> trunk5 stable5
#: models/kptcommonstrings.cpp:131
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "The name and scheduling mode of the schedule"
msgstr ""
#. +> trunk5 stable5
#: models/kptcommonstrings.cpp:132
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "The schedules state"
msgstr ""
#. +> trunk5 stable5
#: models/kptcommonstrings.cpp:134
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "Controls resource overbooking when scheduling"
msgstr ""
#. +> trunk5 stable5
#: models/kptcommonstrings.cpp:136
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<para>Controls resource overbooking when scheduling.</para>"
"<para>If overbooking is allowed, a resource may be booked (on working days) to work more than it is available. This can happen if the resource is allocated to multiple tasks or are booked on other projects.</para>"
"<para>If overbooking is to be avoided, resources will not be booked more than they are available. On resource conflict, tasks will be delayed until the resource is available.</para>"
msgstr ""
#. +> trunk5 stable5
#: models/kptcommonstrings.cpp:142
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "The distribution to be used during scheduling"
msgstr ""
#. +> trunk5 stable5
#: models/kptcommonstrings.cpp:144
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<para>The distribution to be used during scheduling</para>"
"<para>If distribution is 'None', the tasks estimate is used as is during scheduling.</para>"
"<para>If distribution is 'PERT', the estimate used is calculated based on the entered optimistic- (O), pessimistic-(P) and most likely (M) estimate. The formula used for this is (O + 4 * M + P) / 6.</para>"
msgstr ""
#. +> trunk5 stable5
#: models/kptcommonstrings.cpp:150
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "Defines the schedules to be calculated"
msgstr ""
#. +> trunk5 stable5
#: models/kptcommonstrings.cpp:151
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "The scheduled start time"
msgstr ""
#. +> trunk5 stable5
#: models/kptcommonstrings.cpp:152
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "The scheduled finish time"
msgstr ""
#. +> trunk5 stable5
#: models/kptcommonstrings.cpp:153
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "The scheduling direction"
msgstr ""
#. +> trunk5 stable5
#: models/kptcommonstrings.cpp:155
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<para>The scheduling direction.</para>"
"<para>If direction is Forward, the project is scheduled starting at the projects earliest start time specified in the main project dialog.</para>"
"<para>If direction is Backward, the project is scheduled starting at the projects latest finish time specified in the main project dialog.</para>"
msgstr ""
#. +> trunk5 stable5
#: models/kptcommonstrings.cpp:161
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "The scheduler used for calculating the project schedule"
msgstr ""
#. +> trunk5 stable5
#: models/kptcommonstrings.cpp:163
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<para>The scheduler used for calculating the project schedule.</para>"
"<para>The default built-in scheduler is the Network Scheduler.</para>"
"<para>Other schedulers presently available is RCPS if libRCPS is installed on your system. RCPS is a genetics based resource constrained project scheduler.</para>"
msgstr ""
#. +> trunk5 stable5
#: models/kptcommonstrings.cpp:170
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "The granularity used when calculating the project schedule"
msgstr ""
#. +> trunk5 stable5
#: models/kptcommonstrings.cpp:172
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid ""
"<para>The scheduling mode:"
"<list>"
"<item><emphasis>Manual:</emphasis> Calculation must be initiated manually.</item>"
"<item><emphasis>Auto:</emphasis> Calculation is initiated automatically.</item>"
"<para>A working resource can be assigned to one or more required resources. A required resource is a material resource that the working resource depends on in order to do the work.</para>"
"<para>To be able to use a material resource as a required resource, the material resource must be part of a group of type <emphasis>Material</emphasis>.</para>"
msgstr ""
#. +> trunk5
#: models/kptresourceallocationmodel.cpp:224
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Alternative Resource Allocation</title>"
"<para>A working resource can be assigned to one or more required resources. A required resource is a material resource that the working resource depends on in order to do the work.</para>"
"<para>To be able to use a material resource as a required resource, the material resource must be part of a group of type <emphasis>Material</emphasis>.</para>"
msgstr ""
#. +> trunk5
#: models/kptresourceallocationmodel.cpp:264
#, kde-kuit-format
msgctxt "@title:column"
msgid "Alternative"
msgstr ""
#. +> trunk5 stable5
#: models/kptresourceallocationmodel.cpp:265
#, kde-kuit-format
msgctxt "@title:column"
msgid "Required Resources"
msgstr ""
#. +> trunk5
#: models/kptresourceallocationmodel.cpp:279
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "List of resources that can be used as an alternative"
msgstr ""
#. +> trunk5 stable5
#: models/kptresourceallocationmodel.cpp:280
#, kde-kuit-format
msgctxt "@info:tootip"
msgid "Required material resources"
msgstr ""
#. +> trunk5 stable5
#: models/kptresourceallocationmodel.cpp:286
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Required Resources</title>"
"<para>A working resource can be assigned to one or more required resources. A required resource is a material resource that the working resource depends on in order to do the work.</para>"
"<para>To be able to use a material resource as a required resource, the material resource must be part of a group of type Material.</para>"
msgstr ""
#. +> trunk5 stable5
#: models/kptresourceallocationmodel.cpp:519
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "%1 allocated out of %2 available"
msgstr ""
#. +> trunk5 stable5
#: models/kptresourceallocationmodel.cpp:582
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "No material resources available"
msgstr ""
#. +> trunk5 stable5
#: models/kptresourceallocationmodel.cpp:590
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "No required resources"
msgstr ""
#. +> trunk5 stable5
#: models/kptresourceallocationmodel.cpp:593
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "Material resources cannot have required resources"
msgstr ""
#. +> trunk5 stable5
#: models/kptresourceallocationmodel.cpp:595
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "Team resources cannot have required resources"
msgstr ""
#. +> trunk5 stable5
#: models/kptresourceappointmentsmodel.cpp:471
#, kde-format
msgid "External project: %1"
msgstr ""
#. +> trunk5 stable5
#: models/kptresourceappointmentsmodel.cpp:547
#, kde-format
msgid "The total booking on %1, along with the maximum hours for the resource"
msgstr ""
#. +> trunk5 stable5
#: models/kptresourceappointmentsmodel.cpp:579
#, kde-format
msgid "Total booking by this task"
msgstr ""
#. +> trunk5 stable5
#: models/kptresourceappointmentsmodel.cpp:581
#, kde-format
msgid "Total booking by the external project"
msgstr ""
#. +> trunk5 stable5
#: models/kptresourceappointmentsmodel.cpp:624
#, kde-format
msgid "Booking by this task on %1"
msgstr ""
#. +> trunk5 stable5
#: models/kptresourceappointmentsmodel.cpp:626
#, kde-format
msgid "Booking by external project on %1"
msgstr ""
#. +> trunk5 stable5
#: models/kptresourceappointmentsmodel.cpp:757
#, kde-format
msgid "The total hours booked"
msgstr ""
#. +> trunk5 stable5
#: models/kptresourceappointmentsmodel.cpp:761
#, kde-format
msgid "Bookings on %1"
msgstr ""
#. +> trunk5 stable5
#: models/kptresourceappointmentsmodel.cpp:973
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid ""
"%1: %2<nl/>"
"%3: %4"
msgstr ""
#. +> trunk5 stable5
#: models/kptresourceappointmentsmodel.cpp:1026
#, kde-format
msgid "Interval"
msgstr ""
#. +> trunk5 stable5
#: models/kptresourceappointmentsmodel.cpp:1035
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid ""
"%1: %2<nl/>"
"%3: %4<nl/>"
"Assigned: %5<nl/>"
"Available: %6"
msgstr ""
#. +> trunk5 stable5
#: models/kptresourceappointmentsmodel.cpp:1247
#, kde-format
msgid "Start Time"
msgstr ""
#. +> trunk5 stable5
#: models/kptresourceappointmentsmodel.cpp:1248
#, kde-format
msgid "End Time"
msgstr ""
#. +> trunk5 stable5
#: models/kptresourceappointmentsmodel.cpp:1249
#, kde-kuit-format
msgctxt "@title:column noun"
msgid "Load"
msgstr ""
#. +> trunk5 stable5
#: models/kptschedulemodel.cpp:420
msgctxt "(qtundo-format)"
msgid "Modify schedule name"
msgstr ""
#. +> trunk5 stable5
#: models/kptschedulemodel.cpp:443
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "The schedule is in Manual Mode, calculation must be initiated manually"
msgstr ""
#. +> trunk5 stable5
#: models/kptschedulemodel.cpp:445
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "The schedule is in Auto Mode, it will be calculated automatically"
msgid "This document contains an unknown encryption method. Some parts may be unreadable."
msgstr ""
#. +> trunk5 stable5
#: store/KoEncryptedStore.cpp:300
#, kde-format
msgid "This document contains incomplete encryption data. Some parts may be unreadable."
msgstr ""
#. +> trunk5 stable5
#: store/KoEncryptedStore.cpp:314
#, kde-format
msgid "QCA has currently no support for SHA1 or PBKDF2 using SHA1. The document can not be opened."
msgstr ""
#. +> trunk5 stable5
#: store/KoEncryptedStore.cpp:344
#, kde-format
msgid "The manifest file seems to be corrupted. It cannot be modified and the document will remain unreadable. Please try and save the document again to prevent losing your work."
msgstr ""
#. +> trunk5 stable5
#: store/KoEncryptedStore.cpp:442
#, kde-format
msgid "The manifest file cannot be written. The document will remain unreadable. Please try and save the document again to prevent losing your work."
msgstr ""
#. +> trunk5 stable5
#: store/KoEncryptedStore.cpp:563
#, kde-format
msgid "Please enter the password to open this file."
msgstr ""
#. +> trunk5 stable5
#: store/KoEncryptedStore.cpp:738
#, kde-format
msgid "Please enter the password to encrypt the document with."
msgstr ""
#. +> trunk5 stable5
#: store/KoEncryptedStore.cpp:752
#, kde-format
msgid "Do you want to save the password?"
msgstr ""
#. +> trunk5 stable5
#: store/KoNetAccess.cpp:104
#, kde-format
msgid "File '%1' is not readable"
msgstr ""
#. +> trunk5 stable5
#: store/KoNetAccess.cpp:438
#, kde-format
msgid "ERROR: Unknown protocol '%1'"
msgstr ""
#. +> trunk5 stable5
#: store/KoStore.cpp:182
#, kde-format
msgid "The directory mode is not supported for remote locations."
"<para>The Cost Breakdown Structure (CBS) consists of accounts organized into a tree structure. Accounts can be tied to tasks or resources. Usually there will be two top accounts, one for aggregating costs from tasks and one for aggregating costs from resources.</para>"
"<para>This view supports printing using the context menu.<nl/>"
"<link url='%1'>More...</link></para>"
msgstr ""
#. +> trunk5 stable5
#: ui/kptaccountseditor.cpp:291
#, kde-kuit-format
msgctxt "@action:inmenu"
msgid "Add Account"
msgstr ""
#. +> trunk5 stable5
#: ui/kptaccountseditor.cpp:296
#, kde-kuit-format
msgctxt "@action:inmenu"
msgid "Add Subaccount"
msgstr ""
#. +> trunk5 stable5
#: ui/kptaccountseditor.cpp:301
#, kde-kuit-format
msgctxt "@action:inmenu"
msgid "Delete"
msgstr ""
#. +> trunk5 stable5
#: ui/kptaccountsview.cpp:72
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Cost Breakdown View</title>"
"<para>Displays aggregated total cost as well as cost distribution over time.</para>"
"<para>This view supports configuration and printing using the context menu.<nl/>"
"<para>A calendar defines availability for resources or tasks of type <emphasis>Duration</emphasis>. A calendar can be specific to a resource or task, or shared by multiple resources or tasks. A day can be of type <emphasis>Undefined</emphasis>, <emphasis>Non-working day</emphasis> or <emphasis>Working day</emphasis>. A working day has one or more work intervals defined. </para>"
"<para>A calendar can have sub calendars. If a day is undefined in a calendar, the parent calendar is checked. An <emphasis>Undefined</emphasis> day defaults to <emphasis>Non-working</emphasis> if used by a resource, or <emphasis>available all day</emphasis> if used by a task.</para>"
"<para>A calendar can be defined as the <emphasis>Default calendar</emphasis>. The default calendar is used by a working resource, when the resources calendar is not explicitly set.<nl/>"
"<para>Edit dependencies between tasks.Dependencies can be added by dragging a connection area (start or finish) from one task to a connection area of a different task. You can edit or delete a dependency using the context menu.</para>"
"<para>This view supports printing using the context menu.<nl/>"
"<para>Displays scheduled tasks in a Gantt diagram. The chart area can be zoomed in and out with a slider positioned in the upper left corner of the time scale. <note>You need to hoover over it with the mouse for it to show.</note></para>"
"<para>This view supports configuration and printing using the context menu of the tree view.<nl/>"
"<para>Displays scheduled milestones in a Gantt diagram. The chart area can be zoomed in and out with a slider positioned in the upper left corner of the time scale. <note>You need to hoover over it with the mouse for it to show.</note></para>"
"<para>This view supports configuration and printing using the context menu.<nl/>"
"<link url='%1'>More...</link></para>"
msgstr ""
#. +> trunk5 stable5
#: ui/kptganttview.cpp:1827
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Resource Assignments (Gantt)</title>"
"<para>Displays the scheduled resource - task assignments in a Gantt diagram. The chart area can be zoomed in and out with a slider positioned in the upper left corner of the time scale. <note>You need to hoover over it with the mouse for it to show.</note></para>"
"<para>This view supports configuration and printing using the context menu.<nl/>"
"The Work Breakdown Structure introduces numbering for all tasks in the project, according to the task structure.<nl/>"
"The WBS code is auto-generated.<nl/>"
"You can define the WBS code pattern using the <interface>Project->Define WBS Pattern</interface> menu entry."
msgstr ""
#. +> trunk5 stable5
#: ui/kptmainprojectpanel.cpp:115
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "Enables sharing resources with other projects"
msgstr ""
#. +> trunk5 stable5
#: ui/kptmainprojectpanel.cpp:117
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Shared resources</title>"
"Resources can be shared between projects to avoid overbooking resources across projects. Shared resources must be defined in a separate file, and you must have at least read access to it. The projects that share the resources must also be accessible by you."
msgstr ""
#. +> trunk5 stable5
#: ui/kptmainprojectpanel.cpp:125
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "File where shared resources are defined"
msgstr ""
#. +> trunk5 stable5
#: ui/kptmainprojectpanel.cpp:130
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "Directory where all the projects that share resources can be found"
msgstr ""
#. +> trunk5 stable5
#: ui/kptmainprojectpanel.cpp:136
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "Load shared resource assignments at startup"
"<para>Resources are organized in a Resource Breakdown Structure. Resources can be of type <emphasis>Work</emphasis> or <emphasis>Material</emphasis>. When assigned to a task, a resource of type <emphasis>Work</emphasis> can affect the duration of the task, while a resource of type <emphasis>Material</emphasis> does not. A resource must refer to a <emphasis>Calendar</emphasis> defined in the <emphasis>Work and Vacation Editor</emphasis>.<nl/>"
"<link url='%1'>More...</link></para>"
msgstr ""
#. +> trunk5 stable5
#: ui/kptresourceeditor.cpp:299
#, kde-format
msgid "Add Resource"
msgstr ""
#. +> trunk5
#: ui/kptresourceeditor.cpp:389
#, kde-kuit-format
msgctxt "@title"
msgid "Resource groups"
msgstr ""
#. +> trunk5 stable5
#: ui/kptscheduleeditor.cpp:182
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Schedule Editor</title>"
"<para>The Schedule Editor is used to create, edit, calculate and delete schedules.</para>"
"<para>If <emphasis>Mode</emphasis> is set to <emphasis>Auto</emphasis>, the schedule is calculated automatically. <note>Only one schedule can be in <emphasis>Auto Mode</emphasis> simultaneously and it must be a top level schedule without sub-schedules.</note></para>"
"<para>A schedule can have sub-schedules. A sub-schedule can use the projects progress data in order to reschedule only tasks that are not yet finished. Rescheduling will then use e.g. actual start and remaining effort for the tasks.<nl/>"
"This is not limited to persons available in a resource group but can be anyone. You can even directly access your address book with the Choose button."
"<para>The Task Editor is used to create, edit, and delete tasks. Tasks are organized into a Work Breakdown Structure (WBS) to any depth.</para>"
"<para>This view supports configuration and printing using the context menu.<nl/>"
"<link url='%1'>More...</link></para>"
msgstr ""
#. +> trunk5 stable5
#: ui/kpttaskeditor.cpp:441
#, kde-kuit-format
msgctxt "@title resource allocations"
msgid "Allocations"
msgstr ""
#. +> trunk5 stable5
#: ui/kpttaskeditor.cpp:462
#, kde-kuit-format
msgctxt "@title"
msgid "Resources"
msgstr ""
#. +> trunk5 stable5
#: ui/kpttaskeditor.cpp:464
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "Drag resources into the Task Editor and drop into the allocations- or responsible column"
msgstr ""
#. +> trunk5 stable5
-#: ui/kpttaskeditor.cpp:491
+#: ui/kpttaskeditor.cpp:492
#, kde-kuit-format
msgctxt "@title"
msgid "Task Modules"
msgstr ""
#. +> trunk5 stable5
-#: ui/kpttaskeditor.cpp:492
+#: ui/kpttaskeditor.cpp:493
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "Drag a task module into the <emphasis>Task Editor</emphasis> to add it to the project"
msgstr ""
#. +> trunk5 stable5
-#: ui/kpttaskeditor.cpp:517
+#: ui/kpttaskeditor.cpp:518
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Task Modules</title>"
"<para>Task Modules are a group of tasks that can be reused across projects. This makes it possible draw on past experience and to standardize similar operations.</para>"
"<para>A task module is a regular plan file and typically includes tasks, estimates and dependencies.</para>"
"<para><link url='%1'>More...</link></para>"
msgstr ""
#. +> trunk5 stable5
-#: ui/kpttaskeditor.cpp:875
+#: ui/kpttaskeditor.cpp:876
#, kde-format
msgid "Add Milestone"
msgstr ""
#. +> trunk5 stable5
-#: ui/kpttaskeditor.cpp:890
+#: ui/kpttaskeditor.cpp:891
#, kde-format
msgid "Add Sub-Milestone"
msgstr ""
#. +> trunk5 stable5
-#: ui/kpttaskeditor.cpp:905
+#: ui/kpttaskeditor.cpp:906
#, kde-format
msgid "Indent Task"
msgstr ""
#. +> trunk5 stable5
-#: ui/kpttaskeditor.cpp:909
+#: ui/kpttaskeditor.cpp:910
#, kde-format
msgid "Unindent Task"
msgstr ""
#. +> trunk5 stable5
-#: ui/kpttaskeditor.cpp:913
+#: ui/kpttaskeditor.cpp:914
#, kde-format
msgid "Move Up"
msgstr ""
#. +> trunk5 stable5
-#: ui/kpttaskeditor.cpp:917
+#: ui/kpttaskeditor.cpp:918
#, kde-format
msgid "Move Down"
msgstr ""
#. +> trunk5 stable5
-#: ui/kpttaskeditor.cpp:1105
+#: ui/kpttaskeditor.cpp:1106
#, kde-format
msgctxt "(qtundo-format)"
msgid "Indent task"
msgid_plural "Indent %1 tasks"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
-#: ui/kpttaskeditor.cpp:1124
+#: ui/kpttaskeditor.cpp:1125
#, kde-format
msgctxt "(qtundo-format)"
msgid "Unindent task"
msgid_plural "Unindent %1 tasks"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
-#: ui/kpttaskeditor.cpp:1278
+#: ui/kpttaskeditor.cpp:1279
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Task Execution View</title>"
"<para>The view is used to edit and inspect task progress during project execution.</para>"
"<para>This view supports configuration and printing using the context menu.<nl/>"
"Scheduling Configuration. These settings affect the actual scheduling of the task.\n"
"\n"
"The estimation can be either effort based or duration based. If it is effort based, the final duration will depend on the resources assigned to the task. For duration based estimation, the assigned resources do not affect the fixed duration of the task, but only the costs."
"<para>This dialog consists of the following parts:"
"<list>"
"<item>Edit mode control to define the behavior of the dialog.</item>"
"<item>Controls to mark the task as started and finished.</item>"
"<item>Table to enter used effort for each resource.</item>"
"<item>Table for entry of task completion and remaining effort.</item>"
"</list>"
"</para>"
"<para>Edit modes:"
"<list>"
"<item><emphasis>Per resource</emphasis> requires you to enter used effort for each resource assigned to this task. This enables the most detailed tracking of effort- and cost usage.</item>"
"<item><emphasis>Per task</emphasis> enables you to enter the minimum of information. When completion is changed, used effort and remaining effort is automatically calculated, but can of course be manually modified if needed.</item>"
"</list>"
"<note>You should select the desired edit mode when starting the task.</note><nl/>"
"<para>The task dependency dialog enables you to easily add a predecessor to the selected task.<nl/>"
"When opened, it presents the previous task as the default predecessor. This is often the desired predecessor, and can be added by just pressing <interface>OK</interface>.<nl/>"
"The dropdown list of possible predecessors is sorted with the most likely tasks first.</para>"
"These values are used if your estimate is not in hours.\n"
"Let us say Hours per day is 8. If you estimate that a task needs 3 days effort to complete, this is converted to 24 hours when the task is scheduled. The actual time it will take to complete is of course dependent on the availability of the person (or persons) that is assigned to the task."
"<p>The ICC profiles folder seems to be invalid.</p>"
"<p>If you want to try setting it again, choose \"Yes\" here, otherwise choose \"No\", and the \"Color Management\" feature will be disabled until you solve this issue.</p>"
msgid "Edit album properties and collection information."
msgstr ""
#. +> trunk5
#: core/app/main/digikamapp_setup.cpp:233
#, kde-format
msgid "Write Metadata to Files"
msgstr ""
#. +> trunk5
#: core/app/main/digikamapp_setup.cpp:234
#: core/app/main/digikamapp_setup.cpp:391
#, kde-format
msgid "Updates metadata of files in the current album with the contents of digiKam database (file metadata will be overwritten with data from the database)."
msgstr ""
#. +> trunk5
#: core/app/main/digikamapp_setup.cpp:243
#, kde-format
msgid "Reread Metadata From Files"
msgstr ""
#. +> trunk5
#: core/app/main/digikamapp_setup.cpp:244
#: core/app/main/digikamapp_setup.cpp:402
#, kde-format
msgid "Updates the digiKam database from the metadata of the files in the current album (information in the database will be overwritten with data from the files' metadata)."
msgid "Open camera dialog for the device with Solid UDI <udi>"
msgstr ""
#. +> trunk5
#: core/app/main/main.cpp:144
#, kde-format
msgid "Automatically detect and open a connected gphoto2 camera"
msgstr ""
#. +> trunk5
#: core/app/main/main.cpp:146
#, kde-format
msgid "Start digikam with the SQLite database file found in the directory <dir>"
msgstr ""
#. +> trunk5
#: core/app/main/main.cpp:149
#, kde-format
msgid "Start digikam with the configuration file <config>"
msgstr ""
#. +> trunk5
#: core/app/main/main.cpp:169
#, kde-format
msgid ""
"Run-time Qt SQLite or MySQL database plugin is not available. please install it.\n"
"There is no database plugin installed on your computer."
msgstr ""
#. +> trunk5
#: core/app/main/main.cpp:178
#, kde-format
msgid ""
"Run-time Qt SQLite or MySQL database plugin are not available. Please install it.\n"
"Database plugins installed on your computer are listed below."
msgstr ""
#. +> trunk5
#: core/app/main/main.cpp:215
#, kde-format
msgid "<p>The given path for the config file is not valid. Either its parent directory does not exist, it is a directory itself or it cannot be read/written to.</p>"
msgid_plural "Are you sure you want to restore %1 items?"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5
#: core/app/views/stack/trashview.cpp:267
#, kde-format
msgid "Confirm Restore"
msgstr ""
#. +> trunk5
#: core/app/views/stack/trashview.cpp:315
#: core/app/views/stack/trashview.cpp:361
#, kde-format
msgid "Confirm Deletion"
msgstr ""
#. +> trunk5
#: core/app/views/stack/trashview.cpp:316
#, kde-format
msgid "Are you sure you want to delete %1 item permanently?"
msgid_plural "Are you sure you want to delete %1 items permanently?"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5
#: core/app/views/stack/trashview.cpp:362
#, kde-format
msgid "Are you sure you want to delete ALL items permanently?"
msgstr ""
#. +> trunk5
#: core/app/views/stack/welcomepageview.cpp:142
#, kde-format
msgid "New Neural Network engine based on OpenCV Deep Learning module to detect and recognize faces."
msgstr ""
#. +> trunk5
#: core/app/views/stack/welcomepageview.cpp:143
#, kde-format
msgid "Add new shuffle mode in SlideShow."
msgstr ""
#. +> trunk5
#: core/app/views/stack/welcomepageview.cpp:144
#, kde-format
msgid "Add new theme Html5Responsive for HtmlGallery plugin."
msgstr ""
#. +> trunk5
#: core/app/views/stack/welcomepageview.cpp:145
#, kde-format
msgid "Update internal RAW engine to last Libraw 0.20.0 release including Canon CR3 and Sony A7R4 support."
msgstr ""
#. +> trunk5
#: core/app/views/stack/welcomepageview.cpp:146
#, kde-format
msgid "Face Scan dialog contents is now simplified and embedded into left sidebar."
msgstr ""
#. +> trunk5
#: core/app/views/stack/welcomepageview.cpp:149
#, kde-format
msgid "...and much more."
msgstr ""
#. +> trunk5
#: core/app/views/stack/welcomepageview.cpp:155
#, kde-format
msgid ""
"<li>%1</li>"
"\n"
msgstr ""
#. +> trunk5
#: core/app/views/stack/welcomepageview.cpp:158
#, kde-format
msgid "New Features"
msgstr ""
#. +> trunk5
#: core/app/views/stack/welcomepageview.cpp:160
#, kde-format
msgid ""
"<h3>%1</h3>"
"<ul>%2</ul>"
msgstr ""
#. +> trunk5
#: core/app/views/stack/welcomepageview.cpp:161
#, kde-format
msgid "Some of the new features in this release of digiKam include (compared to digiKam 6.x):"
msgstr ""
#. +> trunk5
#: core/app/views/stack/welcomepageview.cpp:170
#, kde-format
msgid "About"
msgstr ""
#. +> trunk5
#: core/app/views/stack/welcomepageview.cpp:172
#, kde-format
msgid ""
"<h3>%1</h3>"
"<h3>%2</h3>"
"<ul>%3</ul>"
msgstr ""
#. +> trunk5
#: core/app/views/stack/welcomepageview.cpp:173
#, kde-format
msgid "digiKam is an open source photo management program designed to import, organize, enhance, search and export your digital images to and from your computer."
msgstr ""
#. +> trunk5
#: core/app/views/stack/welcomepageview.cpp:174
#, kde-format
msgid "Currently, you are in the Album view mode of digiKam. Albums are the places where your files are stored, and are identical to the folders on your hard disk."
msgstr ""
#. +> trunk5
#: core/app/views/stack/welcomepageview.cpp:175
#, kde-format
msgid ""
"<li>%1</li>"
"<li>%2</li>"
msgstr ""
#. +> trunk5
#: core/app/views/stack/welcomepageview.cpp:176
#, kde-format
msgid "digiKam has many powerful features which are described in the <a href=\"https://docs.kde.org/trunk5/en/extragear-graphics/digikam/index.html\">documentation</a>"
msgstr ""
#. +> trunk5
#: core/app/views/stack/welcomepageview.cpp:177
#, kde-format
msgid "The <a href=\"https://www.digikam.org\">digiKam homepage</a> provides information about new versions of digiKam."
"<p>This Batch Queue Manager tool can convert images data to HEIF format.</p>"
"<p>High Efficiency Image File Format (HEIF), also known as High Efficiency Image Coding (HEIC), is a file format for individual images and image sequences. It was developed by the Moving Picture Experts Group (MPEG) and it claims that twice as much information can be stored in a HEIF image as in a JPEG image of the same size, resulting in a better quality image. HEIF also supports animation, and is capable of storing more information than an animated GIF at a small fraction of the size.</p>"
"<p>See <a href='https://en.wikipedia.org/wiki/High_Efficiency_Image_File_Format'>High Efficiency Image File Format</a> for details.</p>"
"<p>This Batch Queue Manager tool can convert images data to JPEG-2000 format.</p>"
"<p>This is an image compression standard and coding system. It was created by the Joint Photographic Experts Group committee in 2000 with the intention of superseding their original discrete cosine transform-based JPEG standard (created in 1992) with a newly designed, wavelet-based method.</p>"
"<p>See details about this format from <a href='https://en.wikipedia.org/wiki/JPEG_2000'>this page</a>.</p>"
"<p>This Batch Queue Manager tool can convert images data to JPEG format.</p>"
"<p>The Joint Photographic Experts Group format is a commonly used method of lossy compression for digital images, particularly for those images produced by digital photography.</p>"
"<p>See details about this format from <a href='https://en.wikipedia.org/wiki/JPEG'>this page</a>.</p>"
msgid "<b>If conversion to PNG fails, this may be due to the color profile check. Simply insert the tool for color profile conversion before this tool and select the desired color profile.</b>"
"<p>This Batch Queue Manager tool can convert images data to TIFF format.</p>"
"<p>The Tagged Image File Format is a computer file format for storing raster graphics images, popular among graphic artists, the publishing industry, and photographers.</p>"
"<p>See details about this format from <a href='https://en.wikipedia.org/wiki/TIFF'>this page</a>.</p>"
msgid "Enter script for execution. Use $INPUT and $OUTPUT for input / output filenames (with special characters escaped). These would be substituted before shell execution."
msgid "When you choose to have the watermark repeated randomly in the placement combo box, you can specify here to randomly rotate the watermark (0, 90, 180, 270 degrees)."
msgid "Use this to get more control over the sparsity of watermark repetition. The higher the value the sparser the watermarks get. Use floating point values, typically between 1.0 and 3.0. It can also be less than 1.0"
msgid "<p>This Batch Queue Manager tool can rotate images.</p>"
msgstr ""
#. +> trunk5
#: core/dplugins/dimg/heif/dimgheifplugin.cpp:58
#, kde-format
msgid "HEIF loader"
msgstr ""
#. +> trunk5
#: core/dplugins/dimg/heif/dimgheifplugin.cpp:73
#, kde-format
msgid "An image loader based on Libheif codec"
msgstr ""
#. +> trunk5
#: core/dplugins/dimg/heif/dimgheifplugin.cpp:78
#, kde-format
msgid "This library is not present on your system."
msgstr ""
#. +> trunk5
#: core/dplugins/dimg/heif/dimgheifplugin.cpp:85
#, kde-format
msgid "This library is available on your system with a maximum color depth support of %1 bits."
msgstr ""
#. +> trunk5
#: core/dplugins/dimg/heif/dimgheifplugin.cpp:90
#, kde-format
msgid "This library is available on your system but is not able to encode image with a suitable color depth."
msgstr ""
#. +> trunk5
#: core/dplugins/dimg/heif/dimgheifplugin.cpp:95
#, kde-format
msgid ""
"<p>This plugin permit to load and save image using Libheif codec.</p>"
"<p>High Efficiency Image File Format (HEIF), also known as High Efficiency Image Coding (HEIC), is a file format for individual images and image sequences. It was developed by the Moving Picture Experts Group (MPEG) and it claims that twice as much information can be stored in a HEIF image as in a JPEG image of the same size, resulting in a better quality image. HEIF also supports animation, and is capable of storing more information than an animated GIF at a small fraction of the size.</p>"
"<p>Encoding HEIC is relevant of optional libde265 codec. %1</p>"
"<p>See <a href='https://en.wikipedia.org/wiki/High_Efficiency_Image_File_Format'>High Efficiency Image File Format</a> for details.</p>"
"<p>This plugin permit to load and save image using ImageMagick coders.</p>"
"<p>ImageMagick is a free and open-source software suite for converting raster image and vector image files. It can read and write over 200 image file formats.</p>"
"<p>See <a href='https://en.wikipedia.org/wiki/ImageMagick'>ImageMagick documentation</a> for details.</p>"
msgstr ""
#. +> trunk5
#: core/dplugins/dimg/jpeg/dimgjpegplugin.cpp:57
#, kde-format
msgid "JPEG loader"
msgstr ""
#. +> trunk5
#: core/dplugins/dimg/jpeg/dimgjpegplugin.cpp:72
#, kde-format
msgid "An image loader based on Libjpeg codec"
msgstr ""
#. +> trunk5
#: core/dplugins/dimg/jpeg/dimgjpegplugin.cpp:77
#, kde-format
msgid ""
"<p>This plugin permit to load and save image using Libjpeg codec.</p>"
"<p>Joint Photographic Experts Group (JPEG) is a commonly used method of lossy compression for digital images, particularly for those images produced by digital photography. The degree of compression can be adjusted, allowing a selectable tradeoff between storage size and image quality.</p>"
"<p>See <a href='https://en.wikipedia.org/wiki/JPEG'>Joint Photographic Experts Group documentation</a> for details.</p>"
"<p>This plugin permit to load and save image using Libjasper codec</p>"
"<p>The JPEG (Joint Photographic Experts Group) 2000 standard, finalized in 2001, defines a image-coding scheme using state-of-the-art compression techniques based on wavelet technology. Its architecture is useful for many diverse applications, including image archiving, security systems, digital photography, and medical imaging.</p>"
"<p>See <a href='https://en.wikipedia.org/wiki/JPEG_2000'>Joint Photographic Experts Group documentation</a> for details.</p>"
"<p>This plugin permit to load and save image using Libpgf codec.</p>"
"<p>The Progressive Graphics File (PGF) is an efficient image file format, that is based on a fast, discrete wavelet transform with progressive coding features. PGF can be used for lossless and lossy compression. It's most suitable for natural images. PGF can be used as a very efficient and fast replacement of JPEG-2000.</p>"
"<p>See <a href='https://en.wikipedia.org/wiki/Progressive_Graphics_File'>Progressive Graphics File documentation</a> for details.</p>"
msgstr ""
#. +> trunk5
#: core/dplugins/dimg/pgf/dimgpgfplugin.cpp:104
#, kde-format
msgid "Progressive Graphics File"
msgstr ""
#. +> trunk5
#: core/dplugins/dimg/png/dimgpngplugin.cpp:57
#, kde-format
msgid "PNG loader"
msgstr ""
#. +> trunk5
#: core/dplugins/dimg/png/dimgpngplugin.cpp:72
#, kde-format
msgid "An image loader based on Libpng codec"
msgstr ""
#. +> trunk5
#: core/dplugins/dimg/png/dimgpngplugin.cpp:77
#, kde-format
msgid ""
"<p>This plugin permit to load and save image using Libpng codec.</p>"
"<p>Portable Network Graphics (PNG) is a raster-graphics file-format that supports lossless data compression. PNG was developed as an improved, non-patented replacement for Graphics Interchange Format.</p>"
"<p>See <a href='https://en.wikipedia.org/wiki/Portable_Network_Graphics'>Portable Network Graphics documentation</a> for details.</p>"
"<p>This plugin permit to load and save image using QImage plugins from Qt Framework.</p>"
"<p>See <a href='https://doc.qt.io/qt-5/qimage.html'>Qt Framework documentation</a> for details.</p>"
msgstr ""
#. +> trunk5
#: core/dplugins/dimg/raw/dimgrawplugin.cpp:55
#, kde-format
msgid "RAW loader"
msgstr ""
#. +> trunk5
#: core/dplugins/dimg/raw/dimgrawplugin.cpp:70
#, kde-format
msgid "An image loader based on Libraw codec"
msgstr ""
#. +> trunk5
#: core/dplugins/dimg/raw/dimgrawplugin.cpp:75
#, kde-format
msgid ""
"<p>This plugin permit to load and save image using Libraw codec.</p>"
"<p>A camera raw image file contains minimally processed data from the image sensor of either a digital camera, a motion picture film scanner, or other image scanner. Raw files are not yet processed and therefore are not ready to be printed or edited with a bitmap graphics editor. RAW are processed by a raw converter in a wide-gamut internal color space where precise adjustments can be made before conversion to a TIFF or JPEG for storage, printing, or further manipulation. This often encodes the image in a device-dependent color space.</p>"
"<p>See <a href='https://en.wikipedia.org/wiki/Raw_image_format'>Raw Image File documentation</a> for details.</p>"
msgstr ""
#. +> trunk5
#: core/dplugins/dimg/tiff/dimgtiffplugin.cpp:57
#, kde-format
msgid "TIFF loader"
msgstr ""
#. +> trunk5
#: core/dplugins/dimg/tiff/dimgtiffplugin.cpp:72
#, kde-format
msgid "An image loader based on Libtiff codec"
msgstr ""
#. +> trunk5
#: core/dplugins/dimg/tiff/dimgtiffplugin.cpp:77
#, kde-format
msgid ""
"<p>This plugin permit to load and save image using Libtiff codec.</p>"
"<p>Tagged Image File Format, abbreviated TIFF or TIF, is a computer file format for storing raster graphics images, popular among graphic artists, the publishing industry, and photographers. TIFF is widely supported by scanning, faxing, word processing, optical character recognition, image manipulation, desktop publishing, and page-layout applications.</p>"
"<p>See <a href='https://en.wikipedia.org/wiki/TIFF'>Tagged Image File Format documentation</a> for details.</p>"
msgid "With this button, you can pick the color from the original image used to set <b>Shadow Tone</b> input levels on the Red, Green, Blue, and Luminosity channels."
msgid "With this button, you can pick the color from the original image used to set <b>Middle Tone</b> input levels on the Red, Green, Blue, and Luminosity channels."
msgid "With this button, you can pick the color from the original image used to set <b>Highlight Tone</b> input levels on the Red, Green, Blue, and Luminosity channels."
"<p>This option maximizes the tonal range in the Red, Green, and Blue channels. It searches the image shadow and highlight limit values and adjusts the Red, Green, and Blue channels to a full histogram range.</p>"
"<p>This option scales brightness values across the active image so that the darkest point becomes black, and the brightest point becomes as bright as possible without altering its hue. This is often a \"magic fix\" for images that are dim or washed out.</p>"
"<p>This option adjusts the brightness of colors across the active image so that the histogram for the value channel is as nearly as possible flat, that is, so that each possible brightness value appears at about the same number of pixels as each other value. Sometimes Equalize works wonderfully at enhancing the contrasts in an image. Other times it gives garbage. It is a very powerful operation, which can either work miracles on an image or destroy it.</p>"
"<p>This option enhances the contrast and brightness of the RGB values of an image by stretching the lowest and highest values to their fullest range, adjusting everything in between.</p>"
"<p>This option enhances the contrast and brightness of the RGB values of an image to calculate optimal exposition and black level using image histogram properties.</p>"
msgid "With this button, you can pick the color of the orange mask of the scanned color negative. It represents white point of the negative, or the darkest black tone of the positive image after inversion. It is also the reference point for applying the film profile."
msgid "If you press this button, the white point is calculated from the image data automatically. This function requires to have some residual orange mask around the exposed area of the negative."
msgid "Move the slider to higher values until maximum brightness is achieved without clipping any color channel. Use the output histogram to evaluate each channel."
msgid "A percent of 0 has no effect, values above 0 represent a factor for mixing the destination color with source color this is done radially i.e. the inner part of the brush radius is totally from source and mixing with destination is done gradually till the outer part of the circle."
"* Press <b>s</b> to switch to source-selection mode, and select source point on image.<br/>"
"* Press <b>s</b> again and start cloning.<br/>"
"* Press <b>[</b> and <b>]</b> to change brush size.<br/>"
"* Press <b>CTRL+Mousewheel</b> to zoom in/out.<br/>"
"* Press <b>m</b> to pan the image if image is larger than viewport.<br/>"
"* Press <b>l</b> to start lasso mode. Start drawing lasso boundary either continuously or discretely, then double-click or press l again to close the boundary.<br/>"
"* Inside lasso mode, you can clone only inside the lasso region.</p>"
"<p>Select the blurring effect to apply to image.</p>"
"<p><b>Zoom Blur</b>: blurs the image along radial lines starting from a specified center point. This simulates the blur of a zooming camera.</p>"
"<p><b>Radial Blur</b>: blurs the image by rotating the pixels around the specified center point. This simulates the blur of a rotating camera.</p>"
"<p><b>Far Blur</b>: blurs the image by using far pixels. This simulates the blur of an unfocalized camera lens.</p>"
"<p><b>Motion Blur</b>: blurs the image by moving the pixels horizontally. This simulates the blur of a linear moving camera.</p>"
"<p><b>Softener Blur</b>: blurs the image softly in dark tones and hardly in light tones. This gives images a dreamy and glossy soft focus effect. It is ideal for creating romantic portraits, glamour photographs, or giving images a warm and subtle glow.</p>"
"<p><b>Shake Blur</b>: blurs the image by shaking randomly the pixels. This simulates the blur of a random moving camera.</p>"
"<p><b>Focus Blur</b>: blurs the image corners to reproduce the astigmatism distortion of a lens.</p>"
"<p><b>Smart Blur</b>: finds the edges of color in your image and blurs them without muddying the rest of the image.</p>"
"<p><b>Frost Glass</b>: blurs the image by randomly disperse light coming through a frosted glass.</p>"
"<p><b>Mosaic</b>: divides the photograph into rectangular cells and then recreates it by filling those cells with average pixel value.</p>"
"<p>Note: if you have previously selected an area in the editor, this will be unaffected by the filter. You can use this method to disable the Raindrops effect on a human face, for example.</p>"
msgid "<p>This Image Editor tool can crop automatically an image by detection of inner black border, generated while panorama stitching for example.</p>"
msgid "Click on this button to draw zones marking which areas of the image are less important. These zones will be deleted when reducing the picture, or duplicated when enlarging the picture."
msgid "Use this value to give a negative bias to the seams which are not straight. May be useful to prevent distortions in some situations, or to avoid artifacts from pixel skipping (it is better to use low values in such case). This setting applies to the whole selected layer if no rigidity mask is used. Note: the bias is proportional to the difference in the transversal coordinate between each two successive points, elevated to the power of 1.5, and summed up for the whole seam."
msgid "This option lets you choose the maximum transversal step that the pixels in the seams can take. In the standard algorithm, corresponding to the default value step = 1, each pixel in a seam can be shifted by at most one pixel with respect to its neighbors. This implies that the seams can form an angle of at most 45 degrees with respect to their base line. Increasing the step value lets you overcome this limit, but may lead to the introduction of artifacts. In order to balance the situation, you can use the rigidity setting."
msgid "During the carving process, at each step the optimal seam to be carved is chosen based on the relevance value for each pixel. However, in the case where two seams are equivalent (which may happen, for instance, when large portions of the image have the same color), the algorithm always chooses the seams from one side. In some cases, this can pose problems, e.g. an object centered in the original image might not be centered in the resulting image. In order to overcome this effect, this setting allows the favored side to be switched automatically during rescaling, at the cost of slightly worse performance."
msgid "This is the free rotation operation preview. If you move the mouse cursor on this preview, a vertical and horizontal dashed line will be drawn to guide you in adjusting the free rotation correction. Release the left mouse button to freeze the dashed line's position."
msgid "This is the perspective transformation operation preview. You can use the mouse for dragging the corner to adjust the perspective transformation area."
"<p>Select your constrained aspect ratio for cropping. Aspect Ratio Crop tool uses a relative ratio. That means it is the same if you use centimeters or inches and it does not specify the physical size.</p>"
"<p>You can see below a correspondence list of traditional photographic paper sizes and aspect ratio crop:</p>"
"<p><b>8:5</b>: common wide-screen monitor (as 1680x1050)</p>"
"<p><b>2:1</b>, <b>3:1</b>, <b>4:1</b>: common panoramic sizes</p>"
"<p><b>16:9</b>: common tv-screen (as HDTV or Full-HD)</p>"
"<p>The paper <b>Format DIN A</b> use the ratio 1:1.414</p>"
"<p>The <b>Golden Ratio</b> is 1:1.618. A composition following this rule is considered visually harmonious but may not be suitable to print on standard photographic paper.</p>"
"<p>The <b>Current Aspect Ratio</b> takes aspect ratio from the currently opened image.</p>"
msgid "This is the shear operation preview. If you move the mouse cursor on this preview, a vertical and horizontal dashed line will be drawn to guide you in adjusting the shear correction. Release the left mouse button to freeze the dashed line's position."
"<p>This tool permit to changes geolocation information from items.</p>"
"<p>This tool can edit GPS data, manually or over a map. Reverse geo-coding is also available through web services.</p>"
"<p>This tool as also an export function to KML to store map traces in Google format.</p>"
"<p>Finally, this tool is able to read a GPS trace from a device to synchronize geo-location of items if you camera do not have an embedded GPS device.</p>"
msgid "<b>Note: <b><a href='https://en.wikipedia.org/wiki/EXIF'>EXIF</a></b> text tags marked by (*) only support printable <b><a href='https://en.wikipedia.org/wiki/Ascii'>ASCII</a></b> characters.</b>"
msgid "Set here the date and time when the original image data was generated. For a digital still camera the date and time the picture was taken are recorded."
msgid "Set here the date and time when the image was stored as digital data. If, for example, an image was captured by a digital still camera and at the same time the file was recorded, then Original and Digitization date and time will have the same contents."
msgid "<b>Warning: EXIF <b><a href='https://en.wikipedia.org/wiki/Exchangeable_image_file_format#MakerNote_data'>Makernotes</a></b> can be unreadable if you set wrong device manufacturer/model description.</b>"
msgid "Select here the mode used by the camera to set exposure when the picture was taken. In auto-bracketing mode, the camera shoots a series of frames of the same scene at different exposure settings."
msgid "Set here the flash energy used to take the picture in BCPS units. Beam Candle Power Seconds is the measure of effective intensity of a light source when it is focused into a beam by a reflector or lens. This value is the effective intensity for a period of one second."
msgid "<b>Note: <b><a href='https://en.wikipedia.org/wiki/IPTC_Information_Interchange_Model'>IPTC</a></b> text tags only support the printable <b><a href='https://en.wikipedia.org/wiki/Ascii'>ASCII</a></b> characters and limit string sizes. Use contextual help for details.</b>"
msgid "Enter here the Informative Provider Reference. I.P.R is a name registered with the IPTC/NAA, identifying the provider that provides an indicator of the content. The default value for the I.P.R is \"IPTC\" if a standard Reference Code is used. This field is limited to 32 ASCII characters."
msgid "Enter here the Subject Reference Number. Provides a numeric code to indicate the Subject Name plus optional Subject Matter and Subject Detail Names in the language of the service. Subject Reference is a number from the range 01000000 to 17999999 and represent a language independent international reference to a Subject. A Subject is identified by its Reference Number and corresponding Names taken from a standard lists given by IPTC/NAA. If a standard reference code is used, these lists are the English language reference versions. This field is limited to 8 ASCII digit code."
msgid "Enter here the Subject Name. English language is used if you selected a standard IPTC/NAA reference code. This field is limited to 64 ASCII characters."
msgid "Enter here the Subject Matter Name. English language is used if you selected a standard IPTC/NAA reference code. This field is limited to 64 ASCII characters."
msgid "Enter here the Subject Detail Name. English language is used if you selected a standard IPTC/NAA reference code. This field is limited to 64 ASCII characters."
msgid "Enter here the Informative Provider Reference. I.P.R is a name registered with the XMP/NAA, identifying the provider that provides an indicator of the content. The default value for the I.P.R is \"XMP\" if a standard Reference Code is used."
msgid "Enter here the Subject Reference Number. Provides a numeric code to indicate the Subject Name plus optional Subject Matter and Subject Detail Names in the language of the service. Subject Reference is a number from the range 01000000 to 17999999 and represent a language independent international reference to a Subject. A Subject is identified by its Reference Number and corresponding Names taken from a standard lists given by XMP/NAA. If a standard reference code is used, these lists are the English language reference versions. This field is limited to 8 digit code."
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">You can download a calendar for your country from <a href=\"http://www.icalshare.com\"><span style=\" text-decoration: underline; color:#0057ae;\">http://www.icalshare.com</span></a> or other sites.</p>"
"\n"
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">This is fully optional. All the events from this calendar will be printed in red.</p>"
msgid "<p>This tool will also permit to set specific dates on your calendar using external data event files as <a href='https://en.wikipedia.org/wiki/VCalendar'>vCalendar</a>, and <a href='https://en.wikipedia.org/wiki/Icalendar'>iCalendar</a> formats.</p>"
msgid "Set automatic level selection (maximized) for pyramid blending, i.e. optimize image features (contrast, saturation, . . .) to be as global as possible."
msgid "Set the number of levels for pyramid blending. Balances towards local features (small number) or global features (high number). Additionally, a low number trades off quality of results for faster execution time and lower memory usage."
msgid "Force hard blend masks without averaging on finest scale. This is only useful for focus stacks with thin and high contrast features. It improves sharpness at the expense of increased noise."
msgid "Sets the relative weight of high-contrast pixels. Increasing this weight makes pixels with neighboring differently colored pixels contribute more to the final output. Particularly useful for focus stacks."
msgid "Use Color Appearance Modelling (CIECAM02) to render detailed colors. Your input files should have embedded ICC profiles. If no ICC profile is present, sRGB color space will be assumed. The difference between using this option and default color blending algorithm is very slight, and will be most noticeable when you need to blend areas of different primary colors together."
"<p>This tool permit to blend bracketed images together to create pseudo HDR photo.</p>"
"<p>To create high definition range image, you need to use images from same subject taken with a tripod and exposed with different exposure settings.</p>"
"<p>To create image with better results, you can use RAW images instead JPEG, where colors depth is higher and are well adapted for merging pixels by pixels.</p>"
"<p>This tool fuses bracketed images with different exposure to make pseudo <a href='https://en.wikipedia.org/wiki/High_dynamic_range_imaging'>HDR image</a>.</p>"
"<p>It can also be used to <a href='https://en.wikipedia.org/wiki/Focus_stacking'>merge focus bracketed stack</a> to get a single image with increased depth of field.</p>"
"<p>This assistant will help you to configure how to import images before merging them to a single one.</p>"
"<p>Bracketed images must be taken with the same camera, in the same conditions, and if possible using a tripod.</p>"
"<p>For more information, please take a look at <a href='https://en.wikipedia.org/wiki/Bracketing'>this page</a></p>"
"<p>Now, we will pre-process bracketed images before fusing them.</p>"
"<p>To perform auto-alignment, the <b>%1</b> program from the <a href='%2'>%3</a> project will be used. Alignment must be performed if you have not used a tripod to take bracketed images. Alignment operations can take a while.</p>"
"<p>Pre-processing operations include Raw demosaicing. Raw images will be converted to 16-bit sRGB images with auto-gamma.</p>"
"The media server permit to share items through the local network using <a href='https://en.wikipedia.org/wiki/Digital_Living_Network_Alliance'>DLNA</a> standard and <a href='https://en.wikipedia.org/wiki/Universal_Plug_and_Play'>UPNP</a> protocol. Many kind of electronic devices can support DLNA, as tablets, cellulars, TV, etc.<br/>"
"Note: depending of the network features and the configuration, the delay to discover the server on client devices can take a while."
"<p>This tool permit to assemble images together to create large panorama.</p>"
"<p>To create panorama image, you need to use images taken from same point of view with a tripod and exposed with same settings.</p>"
"<p>The tool is able to assemble shot taken horizontally, vertically, or as a matrix. Take a care that target image will become huge and require a lots of memory to be processed.</p>"
msgid "<b>JPEG output</b>: Using JPEG output, the panorama file will be smaller at the cost of information loss during compression. This is the easiest way to share the result, or print it online or in a shop."
msgid "<b>TIFF output</b>: Using TIFF output, you get the same color depth than your original photos using RAW images at the cost of a bigger panorama file."
msgid "<b>File name template</b>: Set here the base name of the files that will be saved. For example, if your template is <i>panorama</i> and if you chose a JPEG output, then your panorama will be saved with the name <i>panorama.jpg</i>. If you choose to save also the project file, it will have the name <i>panorama.pto</i>."
msgid "<b>Save project file</b>: You can keep the project file generated to stitch your panorama for further tweaking within <a href=\"http://hugin.sourceforge.net/\">Hugin</a> by checking this. This is useful if you want a different projection, modify the horizon or the center of the panorama, or modify the control points to get better results."
"<p><font color=\"orange\"><b>Warning:</b> One or more converted raw files already exists (they will be skipped during the copying process).</font></p>"
"<p>Congratulations. Your images are stitched into a panorama.</p>"
"<p>Your panorama will be created to the directory:<br />"
"<b>%1</b><br />"
"once you press the <i>Finish</i> button, with the name set below.</p>"
"<p>If you choose to save the project file, and if your images were raw images then the converted images used during the stitching process will be copied at the same time (those are TIFF files that can be big).</p>"
msgid "<b>Detect moving skies</b>: During the control points selection and matching, this option discards any points that are associated to a possible cloud. This is useful to prevent moving clouds from altering the control points matching process."
"<p>Now, we will pre-process images before stitching them.</p>"
"<p>Pre-processing operations include Raw demosaicing. Raw images will be converted to 16-bit sRGB images with auto-gamma.</p>"
"<p>Pre-processing also include a calculation of some control points to match overlaps between images. For that purpose, the <b>%1</b> program from the <a href='%2'>%3</a> project will be used.</p>"
"<p>You can generate quickly a <a href='https://en.wikipedia.org/wiki/Time-lapse_photography'>Time-lapse</a> movie from images</p>"
"<p>captured with a tripod mounted camera controlled with an <a href='https://en.wikipedia.org/wiki/Intervalometer#Photography'>intervalometer</a>.</p>"
"<p></p>"
"<p>You can also create a video presentation with transition</p>"
"<p>effects and audio tracks to show on a TV screen.</p>"
msgid "<i>An effect is an visual panning or zooming applied while an image is displayed. The effect duration will follow the number of frames used to render the image on video stream.</i>"
msgid "<i>A transition is an visual effect applied between two images. For some effects, the duration can depend of random values and can change while the slideshow.</i>"
"<li style=\" margin-top:12px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">move mouse in up/down-direction while pressing the right mouse button</li>"
"\n"
"<li style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">alternatively, press c and use the scrollwheel<br />"
"<li style=\" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">move mouse while pressing the left button</li>"
"<p>This tool permit to export and import items with Google web-services.</p>"
"Google Photo and Google Drive web services are supported."
"<p>See Google web sites for details: <a href='https://photos.google.com'>https://photos.google.com</a> and <a href='https://www.google.com/drive/'>https://www.google.com/drive/</a></p>"
"<p>You cannot use digiKam without a working database. digiKam will attempt to start now, but it will <b>not</b> be functional. Please check the database settings in the <b>configuration menu</b>.</p>"
"<p>Failed to open the database. Error message from database:</p>"
"<p><b>%1</b></p>"
"<p>You cannot use digiKam without a working database. digiKam will attempt to start now, but it will <b>not</b> be functional. Please check the database settings in the <b>configuration menu</b>.</p>"
"Your locale has changed since this album was last opened.\n"
"Old locale: %1, new locale: %2\n"
"If you have recently changed your locale, you need not be concerned.\n"
"Please note that if you switched to a locale that does not support some of the filenames in your collection, these files may no longer be found in the collection. If you are sure that you want to continue, click 'Yes'. Otherwise, click 'No' and correct your locale setting before restarting digiKam."
"<p>You have chosen the folder \"%1\" as the place to store the database. A database file from an older version of digiKam is found in this folder.</p>"
" "
"<p>Would you like to upgrade the old database file - confirming that this database file was indeed created for the pictures located in the folder \"%2\" - or ignore the old file and start with a new database?</p>"
"<p>You have chosen the folder \"%1\" as the new place to store the database. A database file from an older version of digiKam is found in this folder.</p>"
" "
"<p>Would you like to upgrade the old database file, start with a new database, or copy the current database to this location and continue using it?</p>"
"<p>You have chosen the folder \"%1\" as the new place to store the database. A database file from an older version of digiKam is found in this folder.</p>"
" "
"<p>Would you like to upgrade the old database file or start with a new database?</p>"
msgid "This is a CD/DVD, which is identified by the label that you can set in your CD burning application. There is already another entry with the same label. The two will be distinguished by the files in the top directory, so please do not append files to the CD, or it will not be recognized. In the future, please set a unique label on your CDs and DVDs if you intend to use them with digiKam."
msgid "This is a CD/DVD. It will be identified by the label (\"%1\")that you have set in your CD burning application. If you create further CDs for use with digikam in the future, please remember to give them a unique label as well."
msgid "This entry will only be identified by the path where it is found on your system (\"%1\"). No more specific means of identification (UUID, label) is available."
msgid "It is not possible on your system to identify the storage medium of this path. It will be added using the file path as the only identifier. This will work well for your local hard disk."
msgid "The database is not valid: the \"DBVersion\" setting does not exist. The current database schema version cannot be verified. Try to start with an empty database. "
msgid "The database has been used with a more recent version of digiKam and has been updated to a database schema which cannot be used with this version. (This means this digiKam version is too old, or the database format is too recent.) Please use the more recent version of digiKam that you used before. "
msgid "Failed to open a database transaction on your database file \"%1\". This is unusual. Please check that you can access the file and no other process has currently locked the file. If the problem persists you can get help from the digikam developers mailing list (see www.digikam.org/support). As well, please have a look at what digiKam prints on the console. "
msgid "The schema updating process from version 4 to 6 failed, caused by an error that we did not expect. You can try to discard your old database and start with an empty one. (In this case, please move the database files \"%1\" and \"%2\" from the directory \"%3\"). More probably you will want to report this error to the digikam developers mailing list (see www.digikam.org/support). As well, please have a look at what digiKam prints on the console. "
msgid "Failed to update the database schema from version %1 to version %2. Please read the error messages printed on the console and report this error as a bug at bugs.kde.org. "
msgid "The database update action cannot be found. Please ensure that the dbconfig.xml file of the current version of digiKam is installed at the correct place. "
msgid "Failed to copy the old database file (\"%1\") to its new location (\"%2\"). Error message: \"%3\". Please make sure that the file can be copied, or delete it."
msgid "The old database file (\"%1\") has been copied to the new location (\"%2\") but it cannot be opened. Please delete both files and try again, starting with an empty database. "
msgid "No album library path has been found in the configuration file. Giving up the schema updating process. Please try with an empty database, or repair your configuration."
msgid "There was an error associating your albumLibraryPath (\"%1\") with a storage volume of your system. This problem may indicate that there is a problem with your installation. If you are working on Linux, check that HAL is installed and running. In any case, you can seek advice from the digikam developers mailing list (see www.digikam.org/support). The database updating process will now be aborted because we do not want to create a new database based on false assumptions from a broken installation."
msgid "Could not open the configuration file <b>%1</b>. This file is installed with the digikam application and is absolutely required to run digikam. Please check your installation."
msgid "An old version of the configuration file <b>%1</b> is found. Please ensure that the version released with the running version of digiKam is installed. "
msgid "The database is not valid: the \"DBSimilarityVersion\" setting does not exist. The current database schema version cannot be verified. Try to start with an empty database. "
msgid "The database has been used with a more recent version of digiKam and has been updated to a database schema which cannot be used with this version. (This means this digiKam version is too old, or the database format is to recent) Please use the more recent version of digikam that you used before. "
msgstr ""
#. +> trunk5
#: core/libs/database/tags/facetags.cpp:393
#, kde-format
msgctxt "People on your photos"
msgid "People"
msgstr ""
#. +> trunk5
#: core/libs/database/tags/facetags.cpp:441
#, kde-format
msgctxt "The list of detected faces from the collections but not recognized"
msgid "Unknown"
msgstr ""
#. +> trunk5
#: core/libs/database/tags/facetags.cpp:461
#, kde-format
msgctxt "The list of recognized faces from the collections but not confirmed"
msgid "The database is not valid: the \"DBThumbnailsVersion\" setting does not exist. The current database schema version cannot be verified. Try to start with an empty database. "
"<p>Select here the type of database backend.</p>"
"<p><b>SQlite</b> backend is for local database storage with a small or medium collection sizes. It is the default and recommended backend for collections with less than 100K items.</p>"
"<p><b>MySQL Internal</b> backend is for local database storage with huge collection sizes. This backend is recommend for local collections with more than 100K items.</p>"
"<p><i>Be careful: this one still in experimental stage.</i></p>"
"<p><b>MySQL Server</b> backend is a more robust solution especially for remote and shared database storage. It is also more efficient to manage huge collection sizes with more than 100K items.</p>"
"<p><i>Be careful: this one still in experimental stage.</i></p>"
"<p>Set here the location where the database files will be stored on your system. There are three databases: one for all collections properties, one to store compressed thumbnails, and one to store faces recognition metadata.<br/>"
"Write access is required to be able to edit image properties.</p>"
"<p>Databases are digiKam core engines. Take care to use a place hosted by fast hardware (as SSD) with enough free space especially for thumbnails database.</p>"
"<p>Note: a remote file system such as NFS, cannot be used here. For performance reasons, it is also recommended not to use removable media.</p>"
msgid "<p>Here you can configure locations where MySQL binary tools are located. digiKam will try to find these binaries automatically if they are already installed on your computer.</p>"
"<p>digiKam expects that database is already created with a dedicated user account. This user name <i>digikam</i> will require full access to the database.<br/>"
"If your database is not already set up, you can use the following SQL commands (after replacing the <b><i>password</i></b> with the correct one).</p>"
"<p>Note: with a Linux server, a database can be initialized following the commands below:</p>"
"<p># su</p>"
"<p># systemctl restart mysqld</p>"
"<p># mysql -u root</p>"
"<p>...</p>"
"<p>Enter SQL code to Mysql prompt in order to init digiKam databases with grant privileges (see behind)</p>"
"<p>...</p>"
"<p>quit</p>"
"<p>NOTE: If you have an enormous collection, you should start MySQL server with mysql --max_allowed_packet=128M OR in my.ini or ~/.my.cnf, change the settings</p>"
"<p>Use this configuration view to set all information to be connected to a remote <a href=\"https://en.wikipedia.org/wiki/MySQL\">Mysql database server</a> (or <a href=\"https://en.wikipedia.org/wiki/MariaDB\">MariaDB</a>) through a network. As with Sqlite or MySQL internal server, 3 databases will be stored on the remote server: one for all collections properties, one to store compressed thumbnails, and one to store faces recognition metadata.</p>"
"<p>Unlike Sqlite or MySQL internal server, you can customize the database names to simplify your backups.</p>"
"<p>Databases are digiKam core engines. To prevent performance issues, take a care to use a fast network link between the client and the server computers. It is also recommended to host database files on fast hardware (as <a href=\"https://en.wikipedia.org/wiki/Solid-state_drive\">SSD</a>) with enough free space, especially for thumbnails database, even if data are compressed using wavelets image format <a href=\"https://en.wikipedia.org/wiki/Progressive_Graphics_File\">PGF</a>.</p>"
"<p>The databases must be created previously on the remote server by the administrator. Look in <b>Requirements</b> tab for details.</p>"
"<p>Simulate black and white film exposure using a green filter. This is useful for all scenic shoots, especially portraits photographed against the sky.</p>"
"<p>Simulate black and white film exposure using a yellow filter. This has the most natural tonal correction, and improves contrast. Ideal for landscapes.</p>"
"<p>Simulate black and white film exposure using a yellow-green filter. A yellow-green filter is highly effective for outdoor portraits because red is rendered dark while green appears lighter. Great for correcting skin tones, bringing out facial expressions in close-ups and emphasizing the feeling of liveliness. This filter is highly effective for indoor portraits under tungsten lighting.</p>"
"<p>Gives a warm highlight and mid-tone while adding a bit of coolness to the shadows - very similar to the process of bleaching a print and re-developing in a sepia toner.</p>"
msgid "With this button, you can pick the color from original image used to set <b>Shadow Tone</b> smooth curves point on Red, Green, Blue, and Luminosity channels."
msgid "With this button, you can pick the color from original image used to set <b>Middle Tone</b> smooth curves point on Red, Green, Blue, and Luminosity channels."
msgid "With this button, you can pick the color from original image used to set <b>Highlight Tone</b> smooth curves point on Red, Green, Blue, and Luminosity channels."
msgid "Enable this option if you want to preserve the aspect ratio of image. If enabled, the border width will be a percentage of the image size, else the border width will be in pixels."
msgid "Total smoothing power: if the Detail Factor sets the relative smoothing and the Anisotropy Factor the direction, the Smoothing Factor sets the overall effect."
msgid "<b>Function</b>: This function combines the original RGB channels with the desaturated blurred image. This function is used in each of the tonemapping stages. It can be linear or power. Basically, this function increases the values where both the original and blurred image's value are low and do the opposite on high values."
msgid "<b>Highlights saturation</b>: Usually the (perceived) saturation is increased. The user can choose to lower the saturation on original highlight and shadows from the image with these parameters."
msgid "<b>Shadow saturation</b>: Usually the (perceived) saturation is increased. The user can choose to lower the saturation on original highlight and shadows from the image with these parameters."
msgid "This value is the radius of the inner circle of the filter. In the inner circle the image is preserved. It is expressed as a multiple of the outer radius of the filter."
msgid "This value is the radius of the outer circle of the filter. Outside the outer circle the effect of the filter is at its maximum. It is expressed as a multiple of the diagonal of the image."
msgid "This is the camera maker description string found in image meta-data. This one is used to query and find relevant camera device information from Lensfun database."
msgid "This is the camera model description string found in image meta-data. This one is used to query and found relevant camera device information from Lensfun database."
msgid "This is the lens description string found in image meta-data. This one is used to query and found relevant lens information from Lensfun database."
msgid "Vignetting refers to an image darkening, mostly in the corners. Optical and natural vignetting can be canceled out with this option, whereas mechanical vignetting will not be cured."
msgid "Distortion refers to an image deformation, which is most pronounced towards the corners. These Seidel aberrations are known as pincushion and barrel distortions."
msgid "<b>Note: lens correction options depend of filters available in LensFun library. See <a href='http://lensfun.sourceforge.net'>LensFun project web site</a> for more information.</b>"
"<p>If the image's maximal counts are small, you can use the <b>linear</b> scale.</p>"
"<p><b>Logarithmic</b> scale can be used when the maximal counts are big; if it is used, all values (small and large) will be visible on the graph.</p>"
msgid "<b>Alpha</b>: display the alpha image-channel values. This channel corresponds to the transparency value and is supported by some image formats, such as PNG or TIF."
msgid "<b>Threshold</b>: Adjusts the threshold for denoising of the image in a range from 0.0 (none) to 10.0. The threshold is the value below which everything is considered noise."
msgstr ""
#. +> trunk5
#: core/libs/dimg/filters/nr/nrsettings.cpp:120
#, kde-format
msgid "<b>Softness</b>: This adjusts the softness of the thresholding (soft as opposed to hard thresholding). The higher the softness the more noise remains in the image."
msgstr ""
#. +> trunk5
#: core/libs/dimg/filters/nr/nrsettings.cpp:126
#, kde-format
msgid "Estimate Noise"
msgstr ""
#. +> trunk5
#: core/libs/dimg/filters/nr/nrsettings.cpp:127
#, kde-format
msgid "Compute automatically all noise reduction settings by a parse of noise contained in image."
msgid "This is the radius of the circular convolution. It is the most important parameter for using this tool. For most images the default value of 1.0 should give good results. Select a higher value when your image is very blurred."
msgid "Increasing the correlation may help to reduce artifacts. The correlation can range from 0-1. Useful values are 0.5 and values close to 1, e.g. 0.95 and 0.99. Using a high value for the correlation will reduce the sharpening effect of the tool."
msgid "Increasing the noise filter parameter may help to reduce artifacts. The noise filter can range from 0-1 but values higher than 0.1 are rarely helpful. When the noise filter value is too low, e.g. 0.0 the image quality will be very poor. A useful value is 0.01. Using a high value for the noise filter will reduce the sharpening effect of the tool."
msgid "This is the sharpness for the Gaussian convolution. Use this parameter when your blurring is of a Gaussian type. In most cases you should set this parameter to 0, because it causes nasty artifacts. When you use non-zero values, you will probably also have to increase the correlation and/or noise filter parameters."
msgid "This parameter determines the size of the transformation matrix. Increasing the matrix width may give better results, especially when you have chosen large values for circular or Gaussian sharpness."
msgid "<font color='red'><i>Warning: <a href='https://en.wikipedia.org/wiki/JPEG'>JPEG</a> is a lossy image compression format.</i></font>"
msgstr ""
#. +> trunk5
#: core/libs/dimg/loaders/jpegsettings.cpp:107
#, kde-format
msgid "Chroma subsampling:"
msgstr ""
#. +> trunk5
#: core/libs/dimg/loaders/jpegsettings.cpp:110
#, kde-format
msgid "4:4:4 (best quality)"
msgstr ""
#. +> trunk5
#: core/libs/dimg/loaders/jpegsettings.cpp:111
#, kde-format
msgid "4:2:2 (good quality)"
msgstr ""
#. +> trunk5
#: core/libs/dimg/loaders/jpegsettings.cpp:112
#, kde-format
msgid "4:2:0 (low quality)"
msgstr ""
#. +> trunk5
#: core/libs/dimg/loaders/jpegsettings.cpp:113
#, kde-format
msgid "4:1:1 (low quality)"
msgstr ""
#. +> trunk5
#: core/libs/dimg/loaders/jpegsettings.cpp:114
#, kde-format
msgid ""
"<p>Chroma subsampling reduces file size by taking advantage of the eye's lesser sensitivity to color resolution. How perceptible the difference is depends on the image - large photos will generally show no difference, while sharp, down-scaled pixel graphics may lose fine color detail.</p>"
"<p><b>4:4:4</b> - No chroma subsampling, highest quality but lowest compression.</p>"
"<p><b>4:2:2</b> - Chroma halved horizontally, average compression, average quality.</p>"
"<p><b>4:2:0</b> - Chroma quartered in 2x2 blocks, high compression but low quality.</p>"
"<p><b>4:1:1</b> - Chroma quartered in 4x1 blocks, high compression but low quality.</p>"
msgid "The database is not valid: the \"DBFaceVersion\" setting does not exist. The current database schema version cannot be verified. Try to start with an empty database. "
msgid "The database has been used with a more recent version of digiKam and has been updated to a database schema which cannot be used with this version. (This means this digiKam version is too old, or the database format is to recent.) Please use the more recent version of digiKam that you used before."
"Background color indicates the global image filter status, encompassing all filter settings from the right sidebar.\n"
"\n"
"NO COLOR: no filter is active, all items are visible.\n"
"RED: filtering is on, but no items match.\n"
"GREEN: filter(s) match(es) at least one item.\n"
"\n"
"Move mouse cursor over this text to see more details about active filters.\n"
"Press the Reset button from the right side to clear all filter settings.\n"
"Press the Settings button from the right side to open the filters panel."
msgstr ""
#. +> trunk5
#: core/libs/filters/filterstatusbar.cpp:96
#, kde-format
msgid "Reset all active filters"
msgstr ""
#. +> trunk5
#: core/libs/filters/filterstatusbar.cpp:102
#, kde-format
msgid "Open filter settings panel"
msgstr ""
#. +> trunk5
#: core/libs/filters/filterstatusbar.cpp:132
#, kde-format
msgid ""
"<br/>"
"<nobr><i>Text</i></nobr>"
msgstr ""
#. +> trunk5
#: core/libs/filters/filterstatusbar.cpp:137
#, kde-format
msgid ""
"<br/>"
"<nobr><i>Mime Type</i></nobr>"
msgstr ""
#. +> trunk5
#: core/libs/filters/filterstatusbar.cpp:142
#, kde-format
msgid ""
"<br/>"
"<nobr><i>Geolocation</i></nobr>"
msgstr ""
#. +> trunk5
#: core/libs/filters/filterstatusbar.cpp:147
#, kde-format
msgid ""
"<br/>"
"<nobr><i>Rating</i></nobr>"
msgstr ""
#. +> trunk5
#: core/libs/filters/filterstatusbar.cpp:152
#, kde-format
msgid ""
"<br/>"
"<nobr><i>Pick Labels</i></nobr>"
msgstr ""
#. +> trunk5
#: core/libs/filters/filterstatusbar.cpp:157
#, kde-format
msgid ""
"<br/>"
"<nobr><i>Color Labels</i></nobr>"
msgstr ""
#. +> trunk5
#: core/libs/filters/filterstatusbar.cpp:162
#, kde-format
msgid ""
"<br/>"
"<nobr><i>Tags</i></nobr>"
msgstr ""
#. +> trunk5
#: core/libs/filters/filterstatusbar.cpp:167
#, kde-format
msgid "<nobr><b>Active filters:</b></nobr>"
msgstr ""
#. +> trunk5
#: core/libs/filters/filterstatusbar.cpp:171
#, kde-format
msgid "<nobr><b>Active filter:</b></nobr>"
msgstr ""
#. +> trunk5
#: core/libs/filters/filterstatusbar.cpp:178
#, kde-format
msgid "No active filter"
msgstr ""
#. +> trunk5
#: core/libs/filters/filterstatusbar.cpp:187
#, kde-format
msgid "One active filter"
msgstr ""
#. +> trunk5
#: core/libs/filters/filterstatusbar.cpp:191
#, kde-format
msgid "1 active filter"
msgid_plural "%1 active filters"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5
#: core/libs/filters/geolocationfilter.cpp:37
#, kde-format
msgid "No geo filtering"
msgstr ""
#. +> trunk5
#: core/libs/filters/geolocationfilter.cpp:38
#, kde-format
msgid "Images with coordinates"
msgstr ""
#. +> trunk5
#: core/libs/filters/geolocationfilter.cpp:39
#, kde-format
msgid "Images without coordinates"
msgstr ""
#. +> trunk5
#: core/libs/filters/geolocationfilter.cpp:41
#, kde-format
msgid "Filter by geolocation"
msgstr ""
#. +> trunk5
#: core/libs/filters/geolocationfilter.cpp:42
#, kde-format
msgid "Select how geolocation should affect the images which are shown."
msgstr ""
#. +> trunk5
#: core/libs/filters/mimefilter.cpp:36
#, kde-format
msgid "All Files"
msgstr ""
#. +> trunk5
#: core/libs/filters/mimefilter.cpp:37
#: core/utilities/setup/album/setupmime.cpp:105
#, kde-format
msgid "Image Files"
msgstr ""
#. +> trunk5
#: core/libs/filters/mimefilter.cpp:38
#, kde-format
msgid "No RAW Files"
msgstr ""
#. +> trunk5
#: core/libs/filters/mimefilter.cpp:39
#, kde-format
msgid "JPEG Files"
msgstr ""
#. +> trunk5
#: core/libs/filters/mimefilter.cpp:40
#, kde-format
msgid "PNG Files"
msgstr ""
#. +> trunk5
#: core/libs/filters/mimefilter.cpp:41
#, kde-format
msgid "TIFF Files"
msgstr ""
#. +> trunk5
#: core/libs/filters/mimefilter.cpp:42
#, kde-format
msgid "PGF Files"
msgstr ""
#. +> trunk5
#: core/libs/filters/mimefilter.cpp:43
#, kde-format
msgid "HEIF Files"
msgstr ""
#. +> trunk5
#: core/libs/filters/mimefilter.cpp:44
#, kde-format
msgid "DNG Files"
msgstr ""
#. +> trunk5
#: core/libs/filters/mimefilter.cpp:45
#, kde-format
msgid "RAW Files"
msgstr ""
#. +> trunk5
#: core/libs/filters/mimefilter.cpp:46
#: core/utilities/setup/album/setupmime.cpp:137
#, kde-format
msgid "Video Files"
msgstr ""
#. +> trunk5
#: core/libs/filters/mimefilter.cpp:47
#: core/utilities/setup/album/setupmime.cpp:172
#, kde-format
msgid "Audio Files"
msgstr ""
#. +> trunk5
#: core/libs/filters/mimefilter.cpp:48
#, kde-format
msgid "Raster Graphics"
msgstr ""
#. +> trunk5
#: core/libs/filters/mimefilter.cpp:50
#, kde-format
msgid "Filter by file type"
msgstr ""
#. +> trunk5
#: core/libs/filters/mimefilter.cpp:51
#, kde-format
msgid "Select the file types (MIME types) that you want shown. Note: \"Raster Graphics\" are file formats from raster graphics editors, such as Photoshop, The Gimp, Krita, etc."
msgstr ""
#. +> trunk5
#: core/libs/filters/ratingfilter.cpp:75
#, kde-format
msgid "Select the rating value used to filter albums' contents. Use the context pop-up menu to set rating filter conditions."
msgstr ""
#. +> trunk5
#: core/libs/filters/ratingfilter.cpp:173
#, kde-format
msgid "Rating greater than or equal to %1."
msgstr ""
#. +> trunk5
#: core/libs/filters/ratingfilter.cpp:178
#, kde-format
msgid "Rating equal to %1."
msgstr ""
#. +> trunk5
#: core/libs/filters/ratingfilter.cpp:183
#, kde-format
msgid "Rating less than or equal to %1."
msgstr ""
#. +> trunk5
#: core/libs/filters/ratingfilter.cpp:227
#, kde-format
msgid "Rating Filter Options"
msgstr ""
#. +> trunk5
#: core/libs/filters/ratingfilter.cpp:232
#, kde-format
msgid "Greater Than or Equals Condition"
msgstr ""
#. +> trunk5
#: core/libs/filters/ratingfilter.cpp:234
#, kde-format
msgid "Equals Condition"
msgstr ""
#. +> trunk5
#: core/libs/filters/ratingfilter.cpp:236
#, kde-format
msgid "Less Than or Equals Condition"
msgstr ""
#. +> trunk5
#: core/libs/filters/ratingfilter.cpp:239
#, kde-format
msgid "Exclude Items Without Rating"
msgstr ""
#. +> trunk5
#: core/libs/filters/textfilter.cpp:81
#, kde-format
msgid "Text quick filter (search)"
msgstr ""
#. +> trunk5
#: core/libs/filters/textfilter.cpp:82
#, kde-format
msgid "Enter search patterns to quickly filter this view on item names, captions (comments), and tags"
msgstr ""
#. +> trunk5
#: core/libs/filters/textfilter.cpp:86
#, kde-format
msgid "Text Search Fields"
msgstr ""
#. +> trunk5
#: core/libs/filters/textfilter.cpp:89
#, kde-format
msgid "Defines which fields to search for the text in."
msgstr ""
#. +> trunk5
#: core/libs/filters/textfilter.cpp:92
#, kde-format
msgid "Item Name"
msgstr ""
#. +> trunk5
#: core/libs/filters/textfilter.cpp:94
#, kde-format
msgid "Item Title"
msgstr ""
#. +> trunk5
#: core/libs/filters/textfilter.cpp:96
#, kde-format
msgid "Item Comment"
msgstr ""
#. +> trunk5
#: core/libs/filters/textfilter.cpp:98
#, kde-format
msgid "Tag Name"
msgstr ""
#. +> trunk5
#: core/libs/filters/textfilter.cpp:100
#, kde-format
msgid "Album Name"
msgstr ""
#. +> trunk5
#: core/libs/filters/textfilter.cpp:102
#, kde-format
msgid "Item Aspect Ratio"
msgstr ""
#. +> trunk5
#: core/libs/filters/textfilter.cpp:104
#, kde-format
msgid "Item Pixel Size"
msgstr ""
#. +> trunk5
#: core/libs/filters/textfilter.cpp:107
#, kde-format
msgid "Clear All"
msgstr ""
#. +> trunk5
#: core/libs/iojobs/iojob.cpp:78
#, kde-format
msgid "File/Folder %1 does not exist anymore"
msgstr ""
#. +> trunk5
#: core/libs/iojobs/iojob.cpp:84
#, kde-format
msgid "Album %1 does not exist anymore"
msgstr ""
#. +> trunk5
#: core/libs/iojobs/iojob.cpp:94
#, kde-format
msgid "A file or folder named %1 already exists in %2"
msgstr ""
#. +> trunk5
#: core/libs/iojobs/iojob.cpp:118
#, kde-format
msgid "Could not move folder %1 to album %2"
msgstr ""
#. +> trunk5
#: core/libs/iojobs/iojob.cpp:126
#, kde-format
msgid "Could not move folder %1 to album %2. The folder %1 was copied as well to album %2"
msgstr ""
#. +> trunk5
#: core/libs/iojobs/iojob.cpp:137
#, kde-format
msgid "Could not move file %1 to album %2"
msgstr ""
#. +> trunk5
#: core/libs/iojobs/iojob.cpp:158
#, kde-format
msgid "Could not copy folder %1 to album %2"
msgstr ""
#. +> trunk5
#: core/libs/iojobs/iojob.cpp:169
#, kde-format
msgid "Could not copy file %1 to album %2"
msgstr ""
#. +> trunk5
#: core/libs/iojobs/iojob.cpp:211
#, kde-format
msgid "File/Folder %1 does not exist"
msgstr ""
#. +> trunk5
#: core/libs/iojobs/iojob.cpp:223
#, kde-format
msgid "Could not move folder %1 to collection trash"
msgid "Enter the text used to create tags here. '/' can be used to create a hierarchy of tags. ',' can be used to create more than one hierarchy at the same time."
"<para>If enabled, all RAW files will be decoded in 16-bit color depth using a linear gamma curve. To prevent dark picture rendering in the editor, it is recommended to use Color Management in this mode.</para>"
"<para>If disabled, all RAW files will be decoded in 8-bit color depth with a BT.709 gamma curve and a 99th-percentile white point. This mode is faster than 16-bit decoding.</para>"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:252
#, kde-format
msgctxt "@option:check"
msgid "Interpolate RGB as four colors"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:253
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Interpolate RGB as four colors</title>"
"<para>The default is to assume that all green pixels are the same. If even-row green pixels are more sensitive to ultraviolet light than odd-row this difference causes a mesh pattern in the output; using this option solves this problem with minimal loss of detail.</para>"
"<para>To resume, this option blurs the image a little, but it eliminates false 2x2 mesh patterns with VNG quality method or mazes with AHD quality method.</para>"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:267
#, kde-format
msgctxt "@info:tooltip"
msgid "Visit LibRaw project website"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:277
#, kde-format
msgctxt "@option:check"
msgid "Do not stretch or rotate pixels"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:279
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Do not stretch or rotate pixels</title>"
"<para>For Fuji Super CCD cameras, show the image tilted 45 degrees. For cameras with non-square pixels, do not stretch the image to its correct aspect ratio. In any case, this option guarantees that each output pixel corresponds to one RAW pixel.</para>"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:287
#, kde-format
msgctxt "@label:listbox"
msgid "Quality:"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:291
#, kde-format
msgctxt "@item:inlistbox Quality"
msgid "Bilinear"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:292
#, kde-format
msgctxt "@item:inlistbox Quality"
msgid "VNG"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:293
#, kde-format
msgctxt "@item:inlistbox Quality"
msgid "PPG"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:294
#, kde-format
msgctxt "@item:inlistbox Quality"
msgid "AHD"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:295
#, kde-format
msgctxt "@item:inlistbox Quality"
msgid "DCB"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:296
#, kde-format
msgctxt "@item:inlistbox Quality"
msgid "DHT"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:297
#, kde-format
msgctxt "@item:inlistbox Quality"
msgid "AAHD"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:301
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Quality (interpolation)</title>"
"<para>Select here the demosaicing method to use when decoding RAW images. A demosaicing algorithm is a digital image process used to interpolate a complete image from the partial raw data received from the color-filtered image sensor, internal to many digital cameras, in form of a matrix of colored pixels. Also known as CFA interpolation or color reconstruction, another common spelling is demosaicing. The following methods are available for demosaicing RAW images:</para>"
"<para>"
"<list>"
"<item><emphasis strong='true'>Bilinear</emphasis>: use high-speed but low-quality bilinear interpolation (default - for slow computers). In this method, the red value of a non-red pixel is computed as the average of the adjacent red pixels, and similarly for blue and green.</item>"
"<item><emphasis strong='true'>VNG</emphasis>: use Variable Number of Gradients interpolation. This method computes gradients near the pixel of interest and uses the lower gradients (representing smoother and more similar parts of the image) to make an estimate.</item>"
"<item><emphasis strong='true'>PPG</emphasis>: use Patterned-Pixel-Grouping interpolation. Pixel Grouping uses assumptions about natural scenery in making estimates. It has fewer color artifacts on natural images than the Variable Number of Gradients method.</item>"
"<item><emphasis strong='true'>AHD</emphasis>: use Adaptive Homogeneity-Directed interpolation. This method selects the direction of interpolation so as to maximize a homogeneity metric, thus typically minimizing color artifacts.</item>"
"<item><emphasis strong='true'>DCB</emphasis>: DCB interpolation from linuxphoto.org project.</item>"
"<item><emphasis strong='true'>DHT</emphasis>: DHT interpolation.See https://www.libraw.org/node/2306 for details.</item>"
"<item><emphasis strong='true'>AAHD</emphasis>: modified AHD interpolation.</item>"
"</list>"
"</para>"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:349
#, kde-format
msgctxt "@label:slider"
msgid "Pass:"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:350
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Pass</title>"
"<para>Set here the passes used by the median filter applied after interpolation to Red-Green and Blue-Green channels.</para>"
"<para>This setting is only available for specific Quality options: <emphasis strong='true'>Bilinear</emphasis>, <emphasis strong='true'>VNG</emphasis>, <emphasis strong='true'>PPG</emphasis>, <emphasis strong='true'>AHD</emphasis>, <emphasis strong='true'>DCB</emphasis>, and <emphasis strong='true'>VCD & AHD</emphasis>.</para>"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:362
#, kde-format
msgctxt "@option:check"
msgid "Refine interpolation"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:363
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Refine interpolation</title>"
"<para>This setting is available only for few Quality options:</para>"
"<para>"
"<list>"
"<item><emphasis strong='true'>DCB</emphasis>: turn on the enhance interpolated colors filter.</item>"
"<item><emphasis strong='true'>VCD & AHD</emphasis>: turn on the enhanced effective color interpolation (EECI) refine to improve sharpness.</item>"
"</list>"
"</para>"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:376
#, kde-format
msgctxt "@label"
msgid "Demosaicing"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:384
#, kde-format
msgctxt "@label:listbox"
msgid "Method:"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:386
#, kde-format
msgctxt "@item:inlistbox"
msgid "Default D65"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:387
#, kde-format
msgctxt "@item:inlistbox"
msgid "Camera"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:388
#, kde-format
msgctxt "@item:inlistbox set while balance automatically"
msgid "Automatic"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:389
#, kde-format
msgctxt "@item:inlistbox set white balance manually"
msgid "Manual"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:391
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>White Balance</title>"
"<para>Configure the raw white balance:</para>"
"<para>"
"<list>"
"<item><emphasis strong='true'>Default D65</emphasis>: Use a standard daylight D65 white balance.</item>"
"<item><emphasis strong='true'>Camera</emphasis>: Use the white balance specified by the camera. If not available, reverts to default neutral white balance.</item>"
"<item><emphasis strong='true'>Automatic</emphasis>: Calculates an automatic white balance averaging the entire image.</item>"
"<item><emphasis strong='true'>Manual</emphasis>: Set a custom temperature and green level values.</item>"
"</list>"
"</para>"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:406
#, kde-format
msgctxt "@label:slider"
msgid "T(K):"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:407
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Temperature</title>"
"<para>Set here the color temperature in Kelvin.</para>"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:414
#, kde-format
msgctxt "@label:slider Green component"
msgid "Green:"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:415
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid "<para>Set here the green component to set magenta color cast removal level.</para>"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:418
#, kde-format
msgctxt "@label:listbox"
msgid "Highlights:"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:420
#, kde-format
msgctxt "@item:inlistbox"
msgid "Solid white"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:421
#, kde-format
msgctxt "@item:inlistbox"
msgid "Unclip"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:422
#, kde-format
msgctxt "@item:inlistbox"
msgid "Blend"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:423
#, kde-format
msgctxt "@item:inlistbox"
msgid "Rebuild"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:425
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Highlights</title>"
"<para>Select here the highlight clipping method:</para>"
"<para>"
"<list>"
"<item><emphasis strong='true'>Solid white</emphasis>: clip all highlights to solid white</item>"
"<item><emphasis strong='true'>Unclip</emphasis>: leave highlights unclipped in various shades of pink</item>"
"<item><emphasis strong='true'>Blend</emphasis>:Blend clipped and unclipped values together for a gradual fade to white</item>"
"<item><emphasis strong='true'>Rebuild</emphasis>: reconstruct highlights using a level value</item>"
"<para>Specify the reconstruct highlight level. Low values favor whites and high values favor colors.</para>"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:444
#, kde-format
msgctxt "@option:check"
msgid "Exposure Correction (E.V)"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:445
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid "<para>Turn on the exposure correction before interpolation.</para>"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:448
#, kde-format
msgctxt "@label:slider"
msgid "Linear Shift:"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:453
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Shift</title>"
"<para>Linear Shift of exposure correction before interpolation in E.V</para>"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:456
#, kde-format
msgctxt "@label:slider"
msgid "Highlight:"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:461
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Highlight</title>"
"<para>Amount of highlight preservation for exposure correction before interpolation in E.V. Only take effect if Shift Correction is > 1.0 E.V</para>"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:465
#, kde-format
msgctxt "@option:check"
msgid "Correct false colors in highlights"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:466
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid "<para>If enabled, images with overblown channels are processed much more accurately, without 'pink clouds' (and blue highlights under tungsten lamps).</para>"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:470
#, kde-format
msgctxt "@option:check"
msgid "Auto Brightness"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:471
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid "<para>If disable, use a fixed white level and ignore the image histogram to adjust brightness.</para>"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:474
#, kde-format
msgctxt "@label:slider"
msgid "Brightness:"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:479
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Brightness</title>"
"<para>Specify the brightness level of output image. The default value is 1.0 (works in 8-bit mode only).</para>"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:489
#, kde-format
msgctxt "@option:check Black point"
msgid "Black:"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:490
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Black point</title>"
"<para>Use a specific black point value to decode RAW pictures. If you set this option to off, the Black Point value will be automatically computed.</para>"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:497
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Black point value</title>"
"<para>Specify specific black point value of the output image.</para>"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:500
#, kde-format
msgctxt "@option:check White point"
msgid "White:"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:501
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>White point</title>"
"<para>Use a specific white point value to decode RAW pictures. If you set this option to off, the White Point value will be automatically computed.</para>"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:508
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>White point value</title>"
"<para>Specify specific white point value of the output image.</para>"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:547
#, kde-format
msgctxt "@label"
msgid "White Balance"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:555
#, kde-format
msgctxt "@label:listbox"
msgid "Noise reduction:"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:557
#, kde-format
msgctxt "@item:inlistbox Noise Reduction"
msgid "None"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:558
#, kde-format
msgctxt "@item:inlistbox Noise Reduction"
msgid "Wavelets"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:559
#, kde-format
msgctxt "@item:inlistbox Noise Reduction"
msgid "FBDD"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:561
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Noise Reduction</title>"
"<para>Select here the noise reduction method to apply during RAW decoding.</para>"
"<para>"
"<list>"
"<item><emphasis strong='true'>None</emphasis>: no noise reduction.</item>"
"<item><emphasis strong='true'>Wavelets</emphasis>: wavelets correction to erase noise while preserving real detail. It is applied after interpolation.</item>"
"<item><emphasis strong='true'>FBDD</emphasis>: Fake Before Demosaicing Denoising noise reduction. It is applied before interpolation.</item>"
"</list>"
"</para>"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:586
#, kde-format
msgctxt "@label"
msgid "Corrections"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:594
#, kde-format
msgctxt "@label:listbox"
msgid "Camera Profile:"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:596
#, kde-format
msgctxt "@item:inlistbox Camera Profile"
msgid "None"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:597
#, kde-format
msgctxt "@item:inlistbox Camera Profile"
msgid "Embedded"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:598
#, kde-format
msgctxt "@item:inlistbox Camera Profile"
msgid "Custom"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:600
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Camera Profile</title>"
"<para>Select here the input color space used to decode RAW data.</para>"
"<para>"
"<list>"
"<item><emphasis strong='true'>None</emphasis>: no input color profile is used during RAW decoding.</item>"
"<item><emphasis strong='true'>Embedded</emphasis>: use embedded color profile from RAW file, if it exists.</item>"
"<item><emphasis strong='true'>Custom</emphasis>: use a custom input color space profile.</item>"
"</list>"
"</para>"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:611
#: core/libs/rawengine/drawdecoderwidget.cpp:645
#, kde-format
msgid "ICC Files (*.icc *.icm)"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:613
#, kde-format
msgctxt "@label:listbox"
msgid "Workspace:"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:615
#, kde-format
msgctxt "@item:inlistbox Workspace"
msgid "Raw (no profile)"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:616
#, kde-format
msgctxt "@item:inlistbox Workspace"
msgid "sRGB"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:617
#, kde-format
msgctxt "@item:inlistbox Workspace"
msgid "Adobe RGB"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:618
#, kde-format
msgctxt "@item:inlistbox Workspace"
msgid "Wide Gamut"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:619
#, kde-format
msgctxt "@item:inlistbox Workspace"
msgid "Pro-Photo"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:620
#, kde-format
msgctxt "@item:inlistbox Workspace"
msgid "Custom"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:622
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Workspace</title>"
"<para>Select here the output color space used to decode RAW data.</para>"
"<para>"
"<list>"
"<item><emphasis strong='true'>Raw (linear)</emphasis>: in this mode, no output color space is used during RAW decoding.</item>"
"<item><emphasis strong='true'>sRGB</emphasis>: this is an RGB color space, created cooperatively by Hewlett-Packard and Microsoft. It is the best choice for images destined for the Web and portrait photography.</item>"
"<item><emphasis strong='true'>Adobe RGB</emphasis>: this color space is an extended RGB color space, developed by Adobe. It is used for photography applications such as advertising and fine art.</item>"
"<item><emphasis strong='true'>Wide Gamut</emphasis>: this color space is an expanded version of the Adobe RGB color space.</item>"
"<item><emphasis strong='true'>Pro-Photo</emphasis>: this color space is an RGB color space, developed by Kodak, that offers an especially large gamut designed for use with photographic outputs in mind.</item>"
"<item><emphasis strong='true'>Custom</emphasis>: use a custom output color space profile.</item>"
"</list>"
"</para>"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:657
#, kde-format
msgctxt "@label"
msgid "Color Management"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:850
#, kde-format
msgctxt "@label"
msgid "Threshold:"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:851
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Threshold</title>"
"<para>Set here the noise reduction threshold value to use.</para>"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawfiles.cpp:58
#, kde-format
msgid "Casio Digital Camera Raw File Format"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawfiles.cpp:59
#, kde-format
msgid "NuCore Raw Image File"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawfiles.cpp:64
#, kde-format
msgid "Canon Digital Camera RAW Image Format version 2.0"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawfiles.cpp:66
#, kde-format
msgid "Canon Digital Camera RAW Image Format version 1.0"
"<li>If a tag hierarchy starts with '/', root tag album is used as parent.</li>"
"</ul>"
"</p>"
msgstr ""
#. +> trunk5
#: core/libs/tags/widgets/tageditdlg.cpp:230
#, kde-format
msgid "<p><b>Note</b>: this shortcut can be used to assign or unassign tag to items.</p>"
msgstr ""
#. +> trunk5
#: core/libs/tags/widgets/tageditdlg.cpp:345
#, kde-format
msgid "<b>Create New Tag</b>"
msgstr ""
#. +> trunk5
#: core/libs/tags/widgets/tageditdlg.cpp:349
#, kde-format
msgid ""
"<b>Create New Tag in<br/>"
"\"%1\"</b>"
msgstr ""
#. +> trunk5
#: core/libs/tags/widgets/tageditdlg.cpp:355
#, kde-format
msgid ""
"<b>Properties of Tag<br/>"
"\"%1\"</b>"
msgstr ""
#. +> trunk5
#: core/libs/tags/widgets/tageditdlg.cpp:523
#, kde-format
msgid "Tag creation Error"
msgstr ""
#. +> trunk5
#: core/libs/tags/widgets/tageditdlg.cpp:534
#, kde-format
msgid "An error occurred during tag creation:"
msgstr ""
#. +> trunk5
#: core/libs/tags/widgets/tageditdlg.cpp:536
#, kde-format
msgid "Tag Path"
msgstr ""
#. +> trunk5
#: core/libs/tags/widgets/tagfolderview.cpp:133
#: core/libs/tags/widgets/tagfolderview.cpp:297
#, kde-format
msgid "Collapse Selected Recursively"
msgstr ""
#. +> trunk5
#: core/libs/tags/widgets/tagfolderview.cpp:292
#, kde-format
msgid "Expand Selected Recursively"
msgstr ""
#. +> trunk5
#: core/libs/tags/widgets/tagspopupmenu.cpp:530
#, kde-format
msgid "Recently Assigned Tags"
msgstr ""
#. +> trunk5
#: core/libs/tags/widgets/tagspopupmenu.cpp:586
#: core/libs/tags/widgets/tagspopupmenu.cpp:724
#, kde-format
msgid "Add New Tag..."
msgstr ""
#. +> trunk5
#: core/libs/tags/widgets/tagspopupmenu.cpp:592
#, kde-format
msgid "More Tags..."
msgstr ""
#. +> trunk5
#: core/libs/tags/widgets/tagspopupmenu.cpp:690
#, kde-format
msgid "Assign this Tag"
msgstr ""
#. +> trunk5
#: core/libs/tags/widgets/tagspopupmenu.cpp:699
#, kde-format
msgid "Remove this Tag"
msgstr ""
#. +> trunk5
#: core/libs/tags/widgets/tagspopupmenu.cpp:709
#, kde-format
msgid "Go to this Tag"
msgstr ""
#. +> trunk5
#: core/libs/template/subjectedit.cpp:55
#, kde-format
msgid "Enter the Informative Provider Reference here. I.P.R is a name registered with the XMP/NAA, identifying the provider that provides an indicator of the content. The default value for the I.P.R is \"XMP\" if a standard Reference Code is used."
msgstr ""
#. +> trunk5
#: core/libs/template/subjectedit.cpp:61
#, kde-format
msgid "Enter the Subject Reference Number here. Provides a numeric code to indicate the Subject Name plus optional Subject Matter and Subject Detail Names in the language of the service. Subject Reference is a number from the range 01000000 to 17999999 and represent a language independent international reference to a Subject. A Subject is identified by its Reference Number and corresponding Names taken from a standard lists given by XMP/NAA. If a standard reference code is used, these lists are the English language reference versions. This field is limited to 8 digit code."
msgstr ""
#. +> trunk5
#: core/libs/template/subjectedit.cpp:74
#, kde-format
msgid "Enter the Subject Name here. English language is used if you selected a standard XMP/NAA reference code."
msgstr ""
#. +> trunk5
#: core/libs/template/subjectedit.cpp:78
#, kde-format
msgid "Enter the Subject Matter Name here. English language is used if you selected a standard XMP/NAA reference code."
msgstr ""
#. +> trunk5
#: core/libs/template/subjectedit.cpp:82
#, kde-format
msgid "Enter the Subject Detail Name here. English language is used if you selected a standard XMP/NAA reference code."
msgstr ""
#. +> trunk5
#: core/libs/template/templatelist.cpp:80
#, kde-format
msgid "Here you can see the metadata template list managed by digiKam."
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:118
#, kde-format
msgid "Author Names:"
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:121
#, kde-format
msgid "Enter the names of the photograph's creators. Use semi-colons as separator here."
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:123
#, kde-format
msgid ""
"<p>This field should contain the names of the persons who created the photograph. If it is not appropriate to add the name of the photographer (for example, if the identity of the photographer needs to be protected) the name of a company or organization can also be used. Once saved, this field should not be changed by anyone.</p>"
"<p>To enter more than one name, use <b>semi-colons as separators</b>.</p>"
"<p>With IPTC, this field is limited to 32 ASCII characters.</p>"
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:132
#, kde-format
msgid "Authors' Positions:"
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:135
#, kde-format
msgid "Enter the job titles of the authors here."
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:137
#, kde-format
msgid ""
"<p>This field should contain the job titles of the authors. Examples might include titles such as: Staff Photographer, Freelance Photographer, or Independent Commercial Photographer. Since this is a qualifier for the Author field, the Author field must also be filled out.</p>"
"<p>With IPTC, this field is limited to 32 ASCII characters.</p>"
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:148
#, kde-format
msgid "Enter the photograph credit here."
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:150
#, kde-format
msgid ""
"<p>(synonymous to Provider): Use the Provider field to identify who is providing the photograph. This does not necessarily have to be the author. If a photographer is working for a news agency such as Reuters or the Associated Press, these organizations could be listed here as they are \"providing\" the image for use by others. If the image is a stock photograph, then the group (agency) involved in supplying the image should be listed here.</p>"
"<p>With IPTC, this field is limited to 32 ASCII characters.</p>"
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:162
#, kde-format
msgid "Enter the copyright notice to identify the current owner(s) of the copyright here."
"In Europe you would use: Copyright {Year} {Copyright owner}, all rights reserved. \n"
"In Japan, for maximum protection, the following three items should appear in the copyright field of the IPTC Core: (a) the word, Copyright; (b) year of the first publication; and (c) name of the author. You may also wish to include the phrase \"all rights reserved\".</p>"
"<p>With XMP, you can include more than one copyright string using different languages.</p>"
"<p>With IPTC, this field is limited to 128 ASCII characters.</p>"
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:183
#, kde-format
msgid "Right Usage Terms:"
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:185
#, kde-format
msgid "Enter the list of instructions on how a resource can be legally used here."
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:186
#, kde-format
msgid ""
"<p>The Right Usage Terms field should be used to list instructions on how a resource can be legally used.</p>"
"<p>With XMP, you can include more than one right usage terms string using different languages.</p>"
"<p>This field does not exist with IPTC.</p>"
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:197
#, kde-format
msgid "Enter the original owner of the photograph here."
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:199
#, kde-format
msgid ""
"<p>The Source field should be used to identify the original owner or copyright holder of the photograph. The value of this field should never be changed after the information is entered following the image's creation. While not yet enforced by the custom panels, you should consider this to be a \"write-once\" field. The source could be an individual, an agency, or a member of an agency. To aid in later searches, it is suggested to separate any slashes \"/\" with a blank space. Use the form \"photographer / agency\" rather than \"photographer/agency.\" Source may also be different from Creator and from the names listed in the Copyright Notice.</p>"
"<p>With IPTC, this field is limited to 32 ASCII characters.</p>"
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:211
#: core/libs/template/templateviewer.cpp:164
#, kde-format
msgid "Instructions:"
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:214
#, kde-format
msgid "Enter the editorial notice here."
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:216
#, kde-format
msgid ""
"<p>The Instructions field should be used to list editorial instructions concerning the use of photograph.</p>"
"<p>With IPTC, this field is limited to 256 ASCII characters.</p>"
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:241
#: core/libs/template/templateviewer.cpp:177
#, kde-format
msgid "Rights"
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:252
#, kde-format
msgid "Enter the city of contents here."
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:254
#, kde-format
msgid "<p>This field should contain the name of the city where the photograph was taken.</p>"
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:262
#, kde-format
msgid "Enter the city sublocation of contents here."
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:264
#, kde-format
msgid "<p>This field should contain the sublocation of the city where the photograph was taken.</p>"
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:269
#: core/libs/template/templateviewer.cpp:186
#: core/libs/template/templateviewer.cpp:208
#, kde-format
msgid "Province/State:"
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:272
#, kde-format
msgid "Enter the province or state of contents here."
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:274
#, kde-format
msgid "<p>This field should contain the province or state where the photograph was taken.</p>"
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:282
#, kde-format
msgid "<p>Select here the country where the photograph was taken.</p>"
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:307
#: core/libs/template/templateviewer.cpp:197
#, kde-format
msgid "Location"
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:316
#, kde-format
msgid "Enter the city name of the lead author here."
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:318
#, kde-format
msgid "<p>This field should contain the city name where the lead author lives.</p>"
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:326
#, kde-format
msgid "Enter the country name of the lead author here."
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:328
#, kde-format
msgid "<p>This field should contain the country name where the lead author lives.</p>"
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:333
#: core/libs/template/templateviewer.cpp:202
#, kde-format
msgid "Address:"
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:336
#, kde-format
msgid "Enter the address of the lead author here."
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:338
#, kde-format
msgid "<p>This field should contain the address where the lead author lives.</p>"
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:343
#: core/libs/template/templateviewer.cpp:204
#, kde-format
msgid "Postal Code:"
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:346
#, kde-format
msgid "Enter the postal code of the lead author here."
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:348
#, kde-format
msgid "<p>This field should contain the postal code where the lead author lives.</p>"
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:353
#, kde-format
msgid "Province:"
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:356
#, kde-format
msgid "Enter the province of the lead author here."
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:358
#, kde-format
msgid "<p>This field should contain the province where the lead author lives.</p>"
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:363
#: core/libs/template/templateviewer.cpp:214
#, kde-format
msgid "Email:"
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:366
#, kde-format
msgid "Enter the email of the lead author here."
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:368
#, kde-format
msgid "<p>This field should contain the email of the lead author.</p>"
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:376
#, kde-format
msgid "Enter the phone number of the lead author here."
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:378
#, kde-format
msgid "<p>This field should contain the phone number of the lead author.</p>"
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:386
#, kde-format
msgid "Enter the web site URL of the lead author here."
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:388
#, kde-format
msgid "<p>This field should contain the web site URL of the lead author.</p>"
msgstr ""
#. +> trunk5
#: core/libs/template/templateselector.cpp:72
#, kde-format
msgid "Template: "
msgstr ""
#. +> trunk5
#: core/libs/template/templateselector.cpp:76
#, kde-format
msgid "Open metadata template editor"
msgstr ""
#. +> trunk5
#: core/libs/template/templateselector.cpp:77
#, kde-format
msgid ""
"<p>Select here the action to perform using the metadata template.</p>"
msgid "Determine Time Difference With Clock Photo"
msgstr ""
#. +> trunk5
#: core/libs/timeadjust/clockphotodialog.cpp:97
#, kde-format
msgid "Load different photo"
msgstr ""
#. +> trunk5
#: core/libs/timeadjust/clockphotodialog.cpp:104
#, kde-format
msgid "If you have a photo in your set with a clock or another external time source on it, you can load it here and set the indicator to the (date and) time displayed. The difference of your internal camera clock will be determined from this setting."
msgid "An error has occurred with the media player..."
msgstr ""
#. +> trunk5
#: core/libs/widgets/combo/dcombobox.cpp:70
#: core/libs/widgets/range/dnuminput.cpp:80
#: core/libs/widgets/range/dnuminput.cpp:179
#, kde-format
msgctxt "@info:tooltip"
msgid "Reset to default value"
msgstr ""
#. +> trunk5
#: core/libs/widgets/common/searchtextbar.cpp:295
#, kde-format
msgid "Case sensitive"
msgstr ""
#. +> trunk5
#: core/libs/widgets/files/dbinaryiface.cpp:214
#, kde-format
msgid "Navigate to %1"
msgstr ""
#. +> trunk5
#: core/libs/widgets/files/dbinarysearch.cpp:69
#, kde-format
msgid "Binary"
msgstr ""
#. +> trunk5
#: core/libs/widgets/files/dbinarysearch.cpp:70
#, kde-format
msgid "Version"
msgstr ""
#. +> trunk5
#: core/libs/widgets/files/dbinarysearch.cpp:108
#, kde-format
msgid "Binary not found."
msgstr ""
#. +> trunk5
#: core/libs/widgets/files/dbinarysearch.cpp:109
#, kde-format
msgid "Minimal version number required for this binary is %1"
msgstr ""
#. +> trunk5
#: core/libs/widgets/files/dbinarysearch.cpp:111
#, kde-format
msgid "Find"
msgstr ""
#. +> trunk5
#: core/libs/widgets/files/dbinarysearch.cpp:113
#, kde-format
msgid " or <a href=\"%1\">download</a>"
msgstr ""
#. +> trunk5
#: core/libs/widgets/files/dbinarysearch.cpp:142
#, kde-format
msgid ""
"<qt>"
"<p><font color=\"red\"><b>Warning:</b> Some necessary binaries have not been found on your system. If you have these binaries installed, please click the 'Find' button to locate them on your system, otherwise please download and install them to proceed.</font></p>"
"</qt>"
msgstr ""
#. +> trunk5
#: core/libs/widgets/files/dbinarysearch.cpp:181
#, kde-format
msgid "A development version has been detect. There is no guarantee on the behavior of this binary."
msgid "Here you can switch between fixed font size and font size to be calculated dynamically and adjusted to changing environment (e.g. widget dimensions, paper size)."
"<p><b>Perceptual intent</b> causes the full gamut of the image to be compressed or expanded to fill the gamut of the destination device, so that gray balance is preserved but colorimetric accuracy may not be preserved.</p>"
"<p>In other words, if certain colors in an image fall outside of the range of colors that the output device can render, the image intent will cause all the colors in the image to be adjusted so that the every color in the image falls within the range that can be rendered and so that the relationship between colors is preserved as much as possible.</p>"
"<p>This intent is most suitable for display of photographs and images, and is the default intent.</p>"
"</li>"
"<li>"
"<p><b>Absolute Colorimetric intent</b> causes any colors that fall outside the range that the output device can render to be adjusted to the closest color that can be rendered, while all other colors are left unchanged.</p>"
"<p>This intent preserves the white point and is most suitable for spot colors (Pantone, TruMatch, logo colors, ....)</p>"
"</li>"
"<li>"
"<p><b>Relative Colorimetric intent</b> is defined such that any colors that fall outside the range that the output device can render are adjusted to the closest color that can be rendered, while all other colors are left unchanged. Proof intent does not preserve the white point.</p>"
"</li>"
"<li>"
"<p><b>Saturation intent</b> preserves the saturation of colors in the image at the possible expense of hue and lightness.</p>"
"<p>Implementation of this intent remains somewhat problematic, and the ICC is still working on methods to achieve the desired effects.</p>"
"<p>This intent is most suitable for business graphics such as charts, where it is more important that the colors be vivid and contrast well with each other rather than a specific color.</p>"
"<p>This area contains a CIE or chromaticity diagram. A CIE diagram is a representation of all the colors that a person with normal vision can see. This is represented by the colored sail-shaped area. In addition you will see a triangle that is superimposed on the diagram outlined in white. This triangle represents the outer boundaries of the color space of the device that is characterized by the inspected profile. This is called the device gamut.</p>"
"<p>In addition there are black dots and yellow lines on the diagram. Each black dot represents one of the measurement points that were used to create this profile. The yellow line represents the amount that each point is corrected by the profile, and the direction of this correction.</p>"
"<p>The ICC profile path seems to be invalid.</p>"
"<p>If you want to set it now, select \"Yes\", otherwise select \"No\". In this case, \"Color Management\" feature will be disabled until you solve this issue</p>"
msgid "<p><a href='https://en.wikipedia.org/wiki/Exif'>EXIF</a> - a standard used by most digital cameras today to store technical information (like aperture and shutter speed) about an image.</p>"
msgid "<p><a href='https://en.wikipedia.org/wiki/IPTC_Information_Interchange_Model'>IPTC</a> - an older standard used in digital photography to store photographer information in images.</p>"
msgid "<p><a href='https://en.wikipedia.org/wiki/Extensible_Metadata_Platform'>XMP</a> - a new standard used in digital photography, designed to replace IPTC.</p>"
msgid "This list shows the results for your renaming pattern. Red items indicate a name collision, either because the new name is equal to the current name, or because the name has already been assigned to another item."
msgid "<p>Enter your renaming pattern here. Use the access buttons to quickly add renaming options and modifiers. For further explanation, use the information button.</p>"
msgid "<p>Add a modifier to a renaming option. To activate this button, place the cursor behind a renaming option or an already assigned modifier.</p>"
msgid "<b>Configure where you keep your images</b>"
msgstr ""
#. +> trunk5
#: core/utilities/firstrun/collectionpage.cpp:83
#, kde-format
msgctxt "This is a path name so you should include the slash in the translation"
msgid "/Pictures"
msgstr ""
#. +> trunk5
#: core/utilities/firstrun/collectionpage.cpp:89
#, kde-format
msgid ""
"<p>Please enter a location where you keep your images.</p>"
" "
"<p>You can choose any local folder, even one that already contains images.<br/>"
" More folders can be added later under the <i>Settings</i> menu. </p>"
" "
msgstr ""
#. +> trunk5
#: core/utilities/firstrun/collectionpage.cpp:96
#, kde-format
msgid "<p><i>Note:</i> removable media (such as USB drives or DVDs) and remote file systems (such as NFS, or Samba mounted with cifs/smbfs) are supported.</p>"
msgstr ""
#. +> trunk5
#: core/utilities/firstrun/collectionpage.cpp:157
#, kde-format
msgid "You must select a folder for digiKam to use as the root album. All of your images will go there."
msgstr ""
#. +> trunk5
#: core/utilities/firstrun/collectionpage.cpp:185
#, kde-format
msgid "Create Root Album Folder?"
msgstr ""
#. +> trunk5
#: core/utilities/firstrun/collectionpage.cpp:186
#, kde-format
msgid ""
"<p>The folder to use as the root album path does not exist:</p>"
"<p><b>%1</b></p>"
"Would you like digiKam to create it for you?"
msgstr ""
#. +> trunk5
#: core/utilities/firstrun/collectionpage.cpp:198
#, kde-format
msgid "Create Root Album Folder Failed"
msgstr ""
#. +> trunk5
#: core/utilities/firstrun/collectionpage.cpp:199
#, kde-format
msgid ""
"<p>digiKam could not create the folder to use as the root album.\n"
"Please select a different location.</p>"
"<p><b>%1</b></p>"
msgstr ""
#. +> trunk5
#: core/utilities/firstrun/collectionpage.cpp:219
#, kde-format
msgid ""
"You do not seem to have write access for the folder selected to be the root album.\n"
"Warning: Without write access, items cannot be edited."
msgstr ""
#. +> trunk5
#: core/utilities/firstrun/databasepage.cpp:62
#, kde-format
msgid "<b>Configure where you will store databases</b>"
msgstr ""
#. +> trunk5
#: core/utilities/firstrun/metadatapage.cpp:64
#, kde-format
msgid "<b>Configure Metadata Storage to Files</b>"
msgstr ""
#. +> trunk5
#: core/utilities/firstrun/metadatapage.cpp:72
#, kde-format
msgid ""
"<qt>"
"<p>Set here if you want to store the information assigned to items in digiKam in the files' metadata, to improve interoperability with other photo management programs:</p>"
"</qt>"
msgstr ""
#. +> trunk5
#: core/utilities/firstrun/metadatapage.cpp:82
#, kde-format
msgid "Do nothing"
msgstr ""
#. +> trunk5
#: core/utilities/firstrun/metadatapage.cpp:87
#, kde-format
msgid "Add information to files"
msgstr ""
#. +> trunk5
#: core/utilities/firstrun/metadatapage.cpp:97
#, kde-format
msgid ""
"<qt>"
"<p><i>Note:</i> recording information to the files' metadata can slow down photo management operations.</p>"
"<h1><b>Migrate configuration and metadata from digiKam 4</b></h1>"
"</p>"
"<p>You can choose here if you want to use the configuration and albums from digiKam 4 in new digiKam. Please note the following warnings:</p>"
"<p>Migration is done <b>at your own risk</b>. digiKam developers do not recommend it and do not support it. On the other hand, creating a new configuration might result in loss of tags and other metadata that was not embedded inside the pictures and was only available in digiKam 4's database.</p>"
"<p>In either case you are recommended to backup the configuration files and databases before proceeding.</p>"
"<p>Specify how images should be opened when left-clicked on in the icon view:</p>"
"</qt>"
msgstr ""
#. +> trunk5
#: core/utilities/firstrun/openfilepage.cpp:83
#, kde-format
msgid "Open a preview"
msgstr ""
#. +> trunk5
#: core/utilities/firstrun/openfilepage.cpp:88
#, kde-format
msgid "Open in the editor"
msgstr ""
#. +> trunk5
#: core/utilities/firstrun/openfilepage.cpp:98
#, kde-format
msgid ""
"<qt>"
"<p><i>Note:</i> using a preview is always faster than using the editor, especially when checking a series of shots. However, you cannot change or fix the image in preview mode. Note that if you want to compare images quickly, it is often better to use the light table: images can be displayed side-by-side, and synchronized zooming and panning can be performed.</p>"
"</qt>"
msgstr ""
#. +> trunk5
#: core/utilities/firstrun/previewpage.cpp:65
#, kde-format
msgid "<b>Configure Preview Behavior</b>"
msgstr ""
#. +> trunk5
#: core/utilities/firstrun/previewpage.cpp:73
#, kde-format
msgid ""
"<qt>"
"<p>Set here how images are displayed in preview mode and on the light table:</p>"
"</qt>"
msgstr ""
#. +> trunk5
#: core/utilities/firstrun/previewpage.cpp:82
#, kde-format
msgid "Load reduced version of image"
msgstr ""
#. +> trunk5
#: core/utilities/firstrun/previewpage.cpp:87
#, kde-format
msgid "Load image"
msgstr ""
#. +> trunk5
#: core/utilities/firstrun/previewpage.cpp:97
#, kde-format
msgid ""
"<qt>"
"<p><i>Note:</i> loading a reduced version of an image is faster but can differ from the original, especially with Raw. In this case, a JPEG version of Raw pre-processed by camera is loaded, instead of the real image data. This JPEG image is embedded in the file metadata and is used by the camera to display a Raw image faster to a TV screen.</p>"
"</qt>"
msgstr ""
#. +> trunk5
#: core/utilities/firstrun/rawpage.cpp:65
#, kde-format
msgid "<b>Configure Raw File Handling</b>"
msgstr ""
#. +> trunk5
#: core/utilities/firstrun/rawpage.cpp:73
#, kde-format
msgid ""
"<qt>"
"<p>Set here how you want to open Raw images in the editor:</p>"
"</qt>"
msgstr ""
#. +> trunk5
#: core/utilities/firstrun/rawpage.cpp:82
#, kde-format
msgid "Open directly, with adjustments made automatically"
msgstr ""
#. +> trunk5
#: core/utilities/firstrun/rawpage.cpp:87
#, kde-format
msgid "Use the Raw import tool to adjust corrections manually"
msgstr ""
#. +> trunk5
#: core/utilities/firstrun/rawpage.cpp:97
#, kde-format
msgid ""
"<qt>"
"<p><i>Note:</i> the Raw import tool is designed for advanced users who want to have the best control over the image. This requires more time in your workflow.</p>"
"</qt>"
msgstr ""
#. +> trunk5
#: core/utilities/firstrun/startscanpage.cpp:43
#, kde-format
msgid "Scan Your Collection"
msgstr ""
#. +> trunk5
#: core/utilities/firstrun/startscanpage.cpp:49
#, kde-format
msgid ""
"<qt>"
"<p>Congratulations. Your minimal setup is done.</p>"
"<p>Remember, you can customize more settings using the digiKam configuration panel. To learn more about the digiKam world, we recommend reading the <b>digiKam handbook</b> using the <b>Help/Handbook</b> menu entry (you need to install the separate digiKam documentation package.) You can also read the manual online from the <a href='https://www.digikam.org/docs'>digikam.org website</a>.</p>"
"<p>Press <b>Finish</b> to close this assistant. digiKam will scan your collection to register all albums in the database. Items including in albums are collected after startup stage in background.</p>"
"<p><i>Note:</i> depending on your collection size, this operation can take a while. If you cancel the scanning operation, it will start again in the next digiKam session.</p>"
"<p>When scanning has completed, at next start-up, digiKam will only check your collection to identify new albums - which is much faster. You can force digiKam to scan for new items manually using the <b>Tools->Maintenance->Scan for new items</b> menu entry.</p>"
"</qt>"
msgstr ""
#. +> trunk5
#: core/utilities/firstrun/tooltipspage.cpp:65
#, kde-format
msgid "<b>Enabled Contextual Tooltips</b>"
msgstr ""
#. +> trunk5
#: core/utilities/firstrun/tooltipspage.cpp:73
#, kde-format
msgid ""
"<qt>"
"<p>Set here if you want to show contextual tooltips in icon-view and folder-view:</p>"
"</qt>"
msgstr ""
#. +> trunk5
#: core/utilities/firstrun/tooltipspage.cpp:82
#, kde-format
msgid "Do not show tooltips"
msgstr ""
#. +> trunk5
#: core/utilities/firstrun/tooltipspage.cpp:87
#, kde-format
msgid "Use Tooltips"
msgstr ""
#. +> trunk5
#: core/utilities/firstrun/tooltipspage.cpp:97
#, kde-format
msgid ""
"<qt>"
"<p><i>Note:</i> tooltips show photograph and digiKam metadata on the fly, as the mouse moves over items. This can be useful when selecting items. Tooltips are displayed in the album folder view, album icon view, camera icon view, batch queue list, and thumb bar. From the digiKam configuration dialog, you can customize the contents of these tooltips and the fonts used.</p>"
"</qt>"
msgstr ""
#. +> trunk5
#: core/utilities/firstrun/welcomepage.cpp:49
#, kde-format
msgid ""
"<qt>"
"<p>"
"<h1><b>Welcome to digiKam %1</b></h1>"
"</p>"
"<p>digiKam is an advanced digital photo management application published as open-source.</p>"
"<p>This assistant will help you to configure first run settings to be able to use digiKam quickly.</p>"
"</qt>"
msgstr ""
#. +> trunk5
#: core/utilities/firstrun/welcomepage.cpp:72
#, kde-format
msgid ""
"<qt><br/>"
"<p>You can ignore the following if you use digiKam for the first time:</p>"
"<p><b>Transition from digiKam 4</b></p>"
"<p>Configuration files from digiKam 4 are not migrated. The old database can still be used, you just need to choose the same locations for collections and database in the following dialogs. It is recommended to create a backup of your database before proceeding.</p>"
"<p>The new location for configuration files is %1 (old %2). There are unresolved problems reported when re-using old configuration files, so it is not recommended to do it for the moment, and at your own risk.</p>"
msgid "Use this option to restrict the duplicate search with some criteria, as to limit search to the album of reference image, or to exclude the album of reference image of the search."
msgid "Image fingerprints have not yet been generated for your collection. The Similarity Search Tools will not be operational without pre-generated fingerprints. Please generate the fingerprints first."
"You have enabled writing to sidecar files for metadata storage in the host application, but not for reading. This means that any metadata stored in the sidecar files will be overwritten here.\n"
"Please enable reading of sidecar files in the host application or continue at your own risk."
"<p>Sets the time zone the camera was set to during photo shooting, so that the time stamps of the images can be converted to GMT to match the GPS time reference.</p>"
"<p>Note: positive offsets count eastwards from zero longitude (GMT), they are 'ahead of time'.</p>"
msgid "Sets the maximum time difference to interpolate GPX file points to image time data. If the time difference exceeds this setting, no match will be attempted."
msgid "Sets the maximum time difference from a GPS track point to the image time to be matched. If the time difference exceeds this setting, no match will be attempted."
msgid "<p>Select the profile for your output device (usually, your printer). This profile will be used to do a soft proof, so you will be able to preview how an image will be rendered via an output device.</p>"
msgid "Cannot open the specified working space profile (\"%1\"). No color transformation will be applied. Please check the color management configuration in digiKam's setup."
msgid "If this option is enabled, the preview area will split vertically. A contiguous area of the image will be shown, with one half from the original image, the other half from the target image."
msgid "If this option is enabled, the preview area will split horizontally. A contiguous area of the image will be shown, with one half from the original image, the other half from the target image."
msgid "If this option is enabled, the preview area will split vertically. The same part of the original and the target image will be shown side by side."
msgid "If this option is enabled, the preview area will split horizontally. The same part of the original and the target image will be shown side by side."
msgid "For more information about the <b>Mounted Camera</b> driver, please read the <b>Supported Digital Still Cameras</b> section in the digiKam manual."
msgid "Set how digiKam will rename files as they are downloaded."
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:245
#, kde-format
msgid "File Renaming Options"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:251
#, kde-format
msgid "Auto-creation of Albums"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:257
#, kde-format
msgid "On the Fly Operations (JPEG only)"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:263
#, kde-format
msgid "DNG Convert Options"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:269
#, kde-format
msgid "Scripting"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:288
#, kde-format
msgctxt "@action Cancel process"
msgid "Cancel"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:295
#, kde-format
msgctxt "@action Information about camera"
msgid "Information"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:302
#, kde-format
msgctxt "@action Capture photo from camera"
msgid "Capture"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:314
#, kde-format
msgctxt "@action:inmenu"
msgid "Select All"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:322
#, kde-format
msgctxt "@action:inmenu"
msgid "Select None"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:330
#, kde-format
msgctxt "@action:inmenu"
msgid "Invert Selection"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:338
#, kde-format
msgctxt "@action:inmenu"
msgid "Select New Items"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:345
#, kde-format
msgctxt "@action:inmenu"
msgid "Select Locked Items"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:353
#, kde-format
msgctxt "@title:menu"
msgid "Download"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:358
#, kde-format
msgctxt "@action"
msgid "Download New"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:368
#, kde-format
msgctxt "@action"
msgid "Download Selected"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:375
#, kde-format
msgctxt "@action"
msgid "Download All"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:383
#, kde-format
msgctxt "@action"
msgid "Download && Delete New"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:391
#, kde-format
msgctxt "@action"
msgid "Download && Delete Selected"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:399
#, kde-format
msgctxt "@action"
msgid "Download && Delete All"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:406
#, kde-format
msgctxt "@action"
msgid "Upload..."
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:414
#, kde-format
msgctxt "@action"
msgid "Toggle Lock"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:422
#, kde-format
msgctxt "@action"
msgid "Mark as downloaded"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:429
#, kde-format
msgctxt "@title:menu"
msgid "Delete"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:434
#, kde-format
msgctxt "@action"
msgid "Delete Selected"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:442
#, kde-format
msgctxt "@action"
msgid "Delete All"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:448
#, kde-format
msgctxt "@action"
msgid "Delete New"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:456
#, kde-format
msgctxt "@title:group"
msgid "Views"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:467
#, kde-format
msgctxt "@action View the selected image"
msgid "Preview Item"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:487
#, kde-format
msgctxt "@title:menu"
msgid "&Sort Items"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:488
#, kde-format
msgctxt "@info:whatsthis"
msgid "The value by which the items are sorted in the thumbnail view"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:492
#, kde-format
msgctxt "item:inmenu Sort by"
msgid "By Name"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:493
#, kde-format
msgctxt "item:inmenu Sort by"
msgid "By Path"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:494
#, kde-format
msgctxt "item:inmenu Sort by"
msgid "By Date"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:495
#, kde-format
msgctxt "item:inmenu Sort by"
msgid "By Size"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:496
#, kde-format
msgctxt "item:inmenu Sort by"
msgid "By Rating"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:497
#, kde-format
msgctxt "item:inmenu Sort by"
msgid "By Download State"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:521
#, kde-format
msgctxt "@title:inmenu"
msgid "Item Sorting &Order"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:522
#, kde-format
msgctxt "@info:whatsthis"
msgid "Defines whether items are sorted in ascending or descending manner."
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:526
#, kde-format
msgctxt "@item:inmenu Sorting Order"
msgid "Ascending"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:528
#, kde-format
msgctxt "@item:inmenu Sorting Order"
msgid "Descending"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:540
#, kde-format
msgctxt "@title:menu"
msgid "&Group Items"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:541
#, kde-format
msgctxt "@info:whatsthis"
msgid "The categories in which the items in the thumbnail view are displayed"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:545
#, kde-format
msgctxt "@item:inmenu Group Items"
msgid "Flat List"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:546
#, kde-format
msgctxt "@item:inmenu Group Items"
msgid "By Folder"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:547
#, kde-format
msgctxt "@item:inmenu Group Items"
msgid "By Format"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:548
#, kde-format
msgctxt "@item:inmenu Group Items"
msgid "By Date"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:574
#, kde-format
msgctxt "@action:inmenu"
msgid "Fit to &Window"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:579
#, kde-format
msgctxt "@action:inmenu"
msgid "Zoom to 100%"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:597
#, kde-format
msgctxt "@option:check"
msgid "Show History"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:603
#, kde-format
msgctxt "@option:check"
msgid "Show Thumbbar"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:628
#: core/utilities/import/main/importui.cpp:858
#, kde-format
msgctxt "@action"
msgid "Previous Image"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:635
#, kde-format
msgctxt "@action Connection failed, try again?"
msgid "Retry"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:847
#, kde-format
msgctxt "@action"
msgid "Exit Preview Mode"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:852
#, kde-format
msgctxt "@action"
msgid "Next Image"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:864
#, kde-format
msgctxt "@action Go to first image"
msgid "First Image"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:869
#, kde-format
msgctxt "@action Go to last image"
msgid "Last Image"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:951
#, kde-format
msgctxt "@info:status"
msgid "Canceling current operation, please wait..."
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1006
#, kde-format
msgctxt "@info"
msgid "Do you want to close the dialog and cancel the current operation?"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1016
#, kde-format
msgctxt "@info:status"
msgid "Disconnecting from camera, please wait..."
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1058
#, kde-format
msgctxt "@info:status"
msgid "Scanning for new files, please wait..."
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1097
#, kde-format
msgctxt "@info:status"
msgid "Ready"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1153
#, kde-format
msgctxt "@info"
msgid "Failed to connect to the camera. Please make sure it is connected properly and turned on."
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1243
#, kde-format
msgctxt "@title:window"
msgid "Select Image to Upload"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1277
#, kde-format
msgctxt "@info"
msgid ""
"There is not enough free space on the Camera Medium to upload pictures.\n"
"\n"
"Space require: %1\n"
"Available free space: %2"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1331
#, kde-format
msgctxt "@info"
msgid ""
"<qt>Camera Folder <resource>%1</resource> already contains the item <resource>%2</resource>.<br/>"
"Please enter a new filename (without extension):</qt>"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1335
#, kde-format
msgctxt "@title:window"
msgid "File already exists"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1401
#, kde-format
msgctxt "@info"
msgid "Your custom target album date format is not valid. Please check your settings..."
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1441
#, kde-format
msgctxt "@info"
msgid "Collection which host your default target album set to process download from camera device is not available. Please select another one from camera configuration dialog."
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1450
#, kde-format
msgctxt "@info"
msgid "Your default target album set to process download from camera device is not available. Please select another one from camera configuration dialog."
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1475
#, kde-format
msgctxt "@info"
msgid "<p>Please select the destination album from the digiKam library to import the camera pictures into.</p>"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1566
#, kde-format
msgctxt "@info Popup notification"
msgid "Images download finished, you can now detach your camera while the images will be auto-rotated"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1573
#, kde-format
msgctxt "@info Popup notification"
msgid "Images download finished"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1968
#, kde-format
msgctxt "@info"
msgid "The items listed below are locked by camera (read-only). These items will not be deleted. If you really want to delete these items, please unlock them and try again."
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1979
#, kde-format
msgctxt "@info"
msgid "About to delete this image. <b>Deleted file is unrecoverable.</b> Are you sure?"
msgid_plural "About to delete these %1 images. <b>Deleted files are unrecoverable.</b> Are you sure?"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:2030
#, kde-format
msgctxt "@title:window"
msgid "Insufficient Disk Space"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:2031
#, kde-format
msgctxt "@info"
msgid ""
"There is not enough free space on the disk of the album you selected to download and process the selected pictures from the camera.\n"
"\n"
"Estimated space required: %1\n"
"Available free space: %2\n"
"\n"
"Try Anyway?"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:2341
#: core/utilities/import/main/importui.cpp:2367
#, kde-format
msgctxt "@info:status"
msgid "No item selected (%1 item)"
msgid_plural "No item selected (%1 items)"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:2359
#, kde-format
msgctxt "@info:status Filename of first selected item of number of items"
msgid "<b>%1</b> (%2 of %3)"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:2377
#, kde-format
msgctxt "@info:status"
msgid "%2/%1 item selected"
msgid_plural "%2/%1 items selected"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:2448
#, kde-format
msgctxt "@info"
msgid "A file with the same name (<b>%1</b>) already exists in folder <resource>%2</resource>."
msgid "Enable this option to set date and time metadata tags to the right values if your camera does not set these tags correctly when pictures are taken. The values will be saved in the DateTimeDigitized and DateTimeCreated EXIF, XMP, and IPTC tags."
msgid "Enable this option to automatically convert all JPEG files to a lossless image format. <b>Note:</b> Image conversion can take a while on a slow computer."
"<p>These expressions may be used to customize date format:</p>"
"<p><b>d</b>: The day as a number without a leading zero (1 to 31)</p>"
"<p><b>dd</b>: The day as a number with a leading zero (01 to 31)</p>"
"<p><b>ddd</b>: The abbreviated localized day name (e.g. 'Mon' to 'Sun')</p>"
"<p><b>dddd</b>: The long localized day name (e.g. 'Monday' to 'Sunday').</p>"
"<p><b>M</b>: The month as a number without a leading zero (1 to 12)</p>"
"<p><b>MM</b>: The month as a number with a leading zero (01 to 12)</p>"
"<p><b>MMM</b>: The abbreviated localized month name (e.g. 'Jan' to 'Dec')</p>"
"<p><b>MMMM</b>: The long localized month name (e.g. 'January' to 'December')</p>"
"<p><b>yy</b>: The year as two digit number (eg. 00 to 99)</p>"
"<p><b>yyyy</b>: The year as four digit number (eg. 2012)</p>"
"<p>All other input characters will be treated as text. Any sequence of characters that are enclosed in singlequotes will be treated as text and not be used as an expression. Examples, if date is 20 July 1969:</p>"
"<p><b>dd.MM.yyyy</b> : 20.07.1969</p>"
"<p><b>ddd MMMM d yy</b> : Sun July 20 69</p>"
"<p><b>'Photo shot on ' dddd</b> : Photo shot on Sunday</p>"
msgid "Enable this option if you want to download your pictures into automatically created file extension-based sub-albums of the destination album. This way, you can separate JPEG and RAW files as they are downloaded from your camera."
msgid "Set this option to show the file modification date below the image thumbnail if it is different than camera creation date. This option is useful to identify quickly which items have been modified."
"Set this option to render icon-view with large thumbnail size, for example in case of 4K monitor is used.\n"
"By default this option is turned off and the maximum thumbnail size is limited to 256x256 pixels. When this option is enabled, thumbnail size can be extended to 512x512 pixels.\n"
"This option will store more data in thumbnail database and will use more system memory. digiKam needs to be restarted to take effect, and Rebuild Thumbnails option from Maintenance tool needs to be processed over whole collections."
msgid "This option changes the size in which thumbnails are generated. You need to restart digiKam for this option to take effect. Furthermore, you need to regenerate all already stored thumbnails via the <interface>Tools / Maintenance</interface> menu."
"<p>Add new file types to show as album items.</p>"
"<p>digiKam attempts to support all of the image formats that digital cameras produce, while being able to handle a few other important video and audio formats.</p>"
" "
"<p>You can add to the already-appreciable list of formats that digiKam handles by adding the extension of the type you want to add. Multiple extensions need to be separated by a semicolon or space.</p>"
"<p><b><u>Note:</u> changes done in this view will perform a database rescan in the background.</b></p>"
"<p>Here you can add the extensions of image files (including RAW files) to be displayed in the Album view. Just put \"xyz abc\" to display files with the xyz and abc extensions in your Album view.</p>"
"<p>You can also remove file formats that are shown by default by putting a minus sign in front of the extension: e.g. \"-gif\" would remove all GIF files from your Album view and any trace of them in your database. They would not be deleted, just not shown in digiKam.</p>"
"<p><b>Warning:</b> Removing files from the database means losing all of their tags and ratings.</p>"
"<p>Here you can add extra extensions of video files to be displayed in your Album view. Just write \"xyz abc\" to support files with the *.xyz and *.abc extensions. Clicking on these files will play them in an embedded video player.</p>"
"<p>You can also remove file formats that are supported by default by putting a minus sign in front of the extension: e.g. \"-avi\" would remove all AVI files from your Album view and any trace of them in your database. They would not be deleted, just not shown in digiKam.</p>"
"<p><b>Warning:</b> Removing files from the database means losing all of their tags and ratings.</p>"
"<p>Here you can add extra extensions of audio files to be displayed in your Album view. Just write \"xyz abc\" to support files with the *.xyz and *.abc extensions. Clicking on these files will play them in an embedded audio player.</p>"
"<p>You can also remove file formats that are supported by default by putting a minus sign in front of the extension: e.g. \"-ogg\" would remove all OGG files from your Album view and any trace of them in your database. They would not be deleted, just not shown in digiKam.</p>"
"<p><b>Warning:</b> Removing files from the database means losing all of their tags and ratings.</p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/album/setupmime.cpp:195
#, kde-format
msgid "Enter additional audio file extensions."
msgstr ""
#. +> trunk5
#: core/utilities/setup/album/setupmime.cpp:258
#, kde-format
msgid ""
"<p>You have chosen to remove the following image formats from the list of supported formats: <b>%1</b>.</p>"
"<p>These are very common formats. If you have images in your collection with these formats, they will be removed from the database and you will lose all information about them, including rating and tags.</p>"
"<p>Are you sure you want to apply your changes and lose the support for these formats?</p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/album/setupmime.cpp:311
#, kde-format
msgid ""
"<p>Files with these extensions will be recognized as images and included into the database:<br/>"
" <code>%1</code></p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/album/setupmime.cpp:321
#, kde-format
msgid ""
"<p>Files with these extensions will be recognized as video files and included into the database:<br/>"
" <code>%1</code></p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/album/setupmime.cpp:331
#, kde-format
msgid ""
"<p>Files with these extensions will be recognized as audio files and included into the database:<br/>"
" <code>%1</code></p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/camera/cameralist.cpp:281
#, kde-format
msgid "Failed to auto-detect camera; please make sure it is connected properly and is turned on. Would you like to try again?"
"<p>Set this option to load images at their full size for preview, rather than at a reduced size. As this option will make it take longer to load images, only use it if you have a fast computer.</p>"
"<p><b>Note:</b> for Raw images, a half size version of the Raw data is used instead of the embedded JPEG preview.</p>"
msgid "If this option is enabled, over- and under-exposure indicators will be displayed only when pure white and pure black color matches, as all color components match the condition in the same time. Otherwise, indicators are turned on when one of the color components matches the condition."
"<para><interface>Non-Destructive Editing and Versioning</interface> allows different versions of an image to be created, whilst always preserving the original image.</para>"
" "
"<para> All steps of the editing history are recorded and can be accessed later.</para>"
"<para>Select the file format in which edited images are saved automatically. Format-specific options, like compression settings, can be configured on the <interface>Format Options</interface> tab.</para>"
"<para>"
"<list>"
"<item><emphasis strong='true'>JPEG</emphasis>: JPEG is the most commonly used file format, but it employs lossy compression, which means that with each saving operation some image information will be irreversibly lost. JPEG offers a good compression rate, resulting in smaller files. </item>"
"<item><emphasis strong='true'>PNG</emphasis>: A widely used format employing lossless compression. The files, though, will be larger because PNG does not achieve very good compression rates.</item>"
"<item><emphasis strong='true'>TIFF</emphasis>: A commonly used format, usually uncompressed or with modest lossless compression. Resulting files will be large, but without quality loss due to compression. </item>"
"<item><emphasis strong='true'>PGF</emphasis>: This is a technically superior file format offering good compression rates with either lossy or lossless compression. But it is not yet widely used and supported, so your friends may not directly be able to open these files, and you may not be able to directly publish them on the web. </item>"
"<item><emphasis strong='true'>JPEG 2000</emphasis>: JPEG 2000 is similar to PGF. Loading or saving is slower, the compression rate is better, and the format more widely supported, though still not comparable to the tradition formats JPEG, PNG or TIFF. </item>"
"<para>First and foremost, the <emphasis>original image will never be overwritten.</emphasis> Instead, when an image is edited, a new file is created: The <interface>current version</interface>.</para>"
" "
"<para>You can also create multiple <interface>versions</interface> deriving from the same <interface>original image</interface>.</para>"
" "
"<para>In addition to these files representing a current version, digiKam can take and keep additional, <interface>intermediate snapshots</interface> during the editing process. This can be useful if you want to preserve the intermediate steps for later access, for example if some editing steps cannot be automatically reproduced.</para>"
"<para>If an image has been edited, only the <interface>current versions</interface> will be shown in the main thumbnail view. From the <interface>right sidebar</interface>, you always have access to all hidden files.</para>"
" "
"<para>With the options here, you can choose to show certain files permanently.</para>"
" "
"<para>If you activate non-destructive editing and image versioning for the first time, it will only be work for newly saved images.</para>"
"<para>In addition to the pixel content, image files usually contain a variety of metadata. A lot of the parameters you can use in digiKam to manage files, such as rating or comment, can be written to the files' metadata.</para>"
" "
"<para>Storing in metadata allows one to preserve this information when moving or sending the files to different systems.</para>"
msgid "Instead of synchronizing metadata, just schedule it for synchronization.Synchronization can be done later by triggering the apply pending, or at digikam exit"
msgid "Turn on this option to write metadata into RAW TIFF/EP files. This feature requires the Exiv2 shared library, version >= 0.18.0. It is still experimental, and is disabled by default."
msgid "Turn off this option to not update file timestamps when files are changed as when you update metadata or image data. Note: disabling this option can introduce some dysfunctions with applications which use file timestamps properties to detect file modifications automatically."
msgid "Turning this option on, will force digiKam to rescan files that has been modified outside digiKam. If a file has changed it is file size or if the last modified timestamp has changed, a rescan of that file will be performed when digiKam starts."
msgid "Turning this option on, will force digiKam to delete the file metadata contained in the database before the file is rescanned. WARNING: if your metadata has been written to the database only and not to the file or sidecar, you will be able to lose inserted metadata such as tags, keywords, or geographic coordinates."
" You can change the contents, rearranging the individual pixels of the image data.<nl/>"
" Or you can set a flag that the file is to be rotated before it is shown.</para>"
" "
"<para>Select this option if you always want to set only a flag. This is less obtrusive, but requires support if the file is accessed with another software. Ensure to allow setting the flag in the metadata if you want to share your files outside digiKam.</para>"
" You can change the contents, rearranging the individual pixels of the image data.<nl/>"
" Or you can set a flag that the file is to be rotated before it is shown.</para>"
" "
"<para>Select this option if you want the file to be rotated by changing the content. This is a lossless operation for JPEG files. For other formats it is a lossy operation, which you need to enable explicitly. It is not support for RAW and other read-only formats, which will be rotated by flag only.</para>"
msgid "For some file formats which apply lossy compression, data will be lost each time the content is rotated. Check this option to allow lossy rotation. If not enabled, these files will be rotated by flag."
msgid "<b>Note: These settings affect the album view and not the image editor. The image editor always changes the image data during the rotation.</b>"
msgid "Turn on this option if you want to apply changes to rating, comments and tags made in Baloo to digiKam's metadata storage. Please note that image metadata will not be edited automatically."
"<p><a href='http://community.kde.org/Baloo'>Baloo</a> provides the basis to handle all kinds of metadata on the KDE desktop in a generic fashion. It allows you to tag, rate and comment your files in KDE applications like Dolphin.</p>"
" "
"<p>Please set here if you want to synchronize the metadata stored by digiKam desktop-wide with the Baloo Desktop Search.</p>"
msgid "Turn on this option to create the XMP sidecar files with a compatible file name (BASENAME.xmp) used by many commercial programs. For Darktable do not enable this option."
"<p>Add file types to be recognised as sidecars.</p>"
"<p>digiKam (optionally) writes metadata to *.xmp sidecar files. Other programs might use different types, which can be specified below. digiKam will neither display these nor read from or write to them. But whenever a matching album item (e.g. \"image.dng\" for \"image.dng.pp3\") is renamed, moved, copied or deleted, the same operation will be done on these sidecar files.</p>"
"<p>Multiple extensions must be separated by a semicolon or a space.</p>"
msgid "<p>Here you can add extra extensions of sidecars files to be processed alongside regular items. These files will not be visible, but regarded as an extension of the main file. Just write \"xyz abc\" to support files with the *.xyz and *.abc extensions. The internally used sidecars type *.xmp is always included.</p>"
msgid "Switching off exif auto rotation will most probably show your images in a wrong orientation, so only change this option if you explicitly require this."
msgid "Switching on this option and your metadata has been written to the database only and not to the file or sidecar, you will be able to lose inserted metadata such as tags, keywords, or geographic coordinates."
"<p><b>Do you really want to enable metadata writing to RAW files?</b></p>"
"<p>DigiKam delegates this task to the Exiv2 library. With different RAW formats, problems are known which can lead to the destruction of RAW files. If you decide to do so, make a backup of your RAW files.</p>"
"<p><b>We strongly recommend not to enable this option.</b></p>"
msgid "You would rather disable writing metadata to RAW files?"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setup.cpp:150
#, kde-format
msgid "Database"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setup.cpp:151
#, kde-format
msgid ""
"<qt>Database Settings<br/>"
"<i>Customize database settings</i></qt>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setup.cpp:156
#, kde-format
msgid "Collections"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setup.cpp:157
#, kde-format
msgid ""
"<qt>Collections Settings<br/>"
"<i>Set root albums locations</i></qt>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setup.cpp:163
#, kde-format
msgid ""
"<qt>Application Views Settings<br/>"
"<i>Customize the look of the views</i></qt>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setup.cpp:168
#, kde-format
msgid "Tool-Tip"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setup.cpp:169
#, kde-format
msgid ""
"<qt>Items Tool-Tip Settings<br/>"
"<i>Customize information in item tool-tips</i></qt>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setup.cpp:180
#, kde-format
msgid "Templates"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setup.cpp:181
#, kde-format
msgid ""
"<qt>Metadata templates<br/>"
"<i>Manage your collection of metadata templates</i></qt>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setup.cpp:187
#, kde-format
msgid ""
"<qt>Image Editor Settings<br/>"
"<i>Customize the image editor settings</i></qt>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setup.cpp:193
#, kde-format
msgid ""
"<qt>Settings for Color Management<br/>"
"<i>Customize the color management settings</i></qt>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setup.cpp:199
#, kde-format
msgid ""
"<qt>Light Table Settings<br/>"
"<i>Customize tool used to compare images</i></qt>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setup.cpp:211
#, kde-format
msgid "<qt>Image Quality Sorter Settings</qt>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setup.cpp:216
#, kde-format
msgid ""
"<qt>Camera Settings<br/>"
"<i>Manage your camera devices</i></qt>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setup.cpp:225
#, kde-format
msgid ""
"<qt>Plug-in Settings<br/>"
"<i>Set which plugins will be accessible from application</i></qt>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setup.cpp:231
#, kde-format
msgid ""
"<qt>Miscellaneous Settings<br/>"
"<i>Customize behavior of the other parts of digiKam</i></qt>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupdatabase.cpp:114
#, kde-format
msgctxt "@title:tab"
msgid "Database Settings"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupdatabase.cpp:122
#, kde-format
msgid ""
"<p>Set the names of directories that you want to ignore from your photo collections. The names are case sensitive and should be separated by a semicolon.</p>"
"<p>This is for example useful when you store your photos on a Synology NAS (Network Attached Storage). In every directory the system creates a subdirectory @eaDir to store thumbnails. To avoid digiKam inserting the original photo and its corresponding thumbnail twice, @eaDir is ignored by default.</p>"
"<p>To re-include directories that are ignored by default prefix it with a minus, e.g. -@eaDir.</p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupdatabase.cpp:140
#, kde-format
msgid "Additional directories to ignore (<a href='image'>Currently ignored directories</a>):"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupdatabase.cpp:145
#, kde-format
msgid "Enter directories that you want to ignore from adding to your collections."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupdatabase.cpp:166
#, kde-format
msgctxt "@title:tab"
msgid "Ignored Directories"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupdatabase.cpp:263
#, kde-format
msgctxt "@info"
msgid ""
"<p>The process of updating the file hashes takes a few minutes.</p>"
" "
"<p>Please ensure that any important collections on removable media are connected. <i>After the upgrade you cannot use your database with a digiKam version prior to 2.0.</i></p>"
" "
"<p>Do you want to begin the update?</p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupdatabase.cpp:278
#, kde-format
msgctxt "@title:group"
msgid "Updates"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupdatabase.cpp:281
#, kde-format
msgctxt "@action:button"
msgid "Update File Hashes"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupdatabase.cpp:283
#, kde-format
msgctxt "@info:tooltip"
msgid ""
"<qt>File hashes are used to identify identical files and to display thumbnails. A new, improved algorithm to create the hash is now used. The old algorithm, though, still works quite well, so it is recommended to carry out this upgrade, but not required.<br/>"
" After the upgrade you cannot use your database with a digiKam version prior to 2.0.</qt>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupdatabase.cpp:292
#, kde-format
msgctxt "@info:tooltip"
msgid "Get information about <interface>Update File Hashes</interface>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupdatabase.cpp:316
#, kde-format
msgid ""
"<p>Directories starting with a dot are ignored by default.<br/>"
" <code>%1</code></p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:188
#, kde-format
msgid "Enable Color Management"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:189
#, kde-format
msgid ""
"<ul>"
"<li>Checked: Color Management is enabled</li>"
"<li>Unchecked: Color Management is disabled</li>"
"</ul>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:196
#, kde-format
msgid "Visit Little CMS project website"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:206
#, kde-format
msgid "Working Color Space"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:212
#, kde-format
msgid "<p>This is the color space all the images will be converted to when opened (if you choose to convert) and the profile that will be embedded when saving. Good and safe choices are <b>Adobe RGB (1998)</b> and <b>sRGB IEC61966-2.1</b></p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:218
#, kde-format
msgid "<p>You can use this button to get more detailed information about the selected workspace profile.</p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:232
#, kde-format
msgid "When the profile of an image does not match the working color space"
msgid "<p>If an image has an embedded color profile not matching the working space profile, digiKam will ask if you want to convert to the working space, keep the embedded profile or discard the embedded profile and assign a different one.</p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:247
#, kde-format
msgid "Convert the image to the working color space"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:248
#, kde-format
msgid "<p>If an image has an embedded color profile not matching the working space profile, digiKam will convert the image's color information to the working color space. This changes the pixel data, but not the appearance of the image.</p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:264
#, kde-format
msgid "When an image has no color profile information"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:272
#, kde-format
msgid "<p>If an image has no embedded color profile, digiKam will ask which color space shall be used to interpret the image and to which color space it shall be transformed for editing.</p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:276
#, kde-format
msgid "Assume it is using the sRGB color space (Internet standard)"
msgstr ""
#. i18n("<p></p>"));
#.
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:281
#, kde-format
msgid "and convert it to the working color space"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:293
#, kde-format
msgid "Assume it is using the working color space"
msgstr ""
#. i18n("<p></p>"));
#.
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:298
#, kde-format
msgid "Convert it from default input color space to working space"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:316
#, kde-format
msgid "When loading a RAW file with uncalibrated colors"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:323
#, kde-format
msgid "Ask for the input profile"
msgstr ""
#. i18n("<p></p>"));
#.
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:328
#, kde-format
msgid "Automatic color correction"
msgstr ""
#. i18n("<p></p>"));
#.
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:333
#, kde-format
msgid "Convert it from the default input profile"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:357
#, kde-format
msgid "Color Managed View"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:362
#, kde-format
msgid "Monitor profile:"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:366
#, kde-format
msgid "<p>Select the color profile for your monitor here.</p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:370
#, kde-format
msgid "<p>You can use this button to get more detailed information about the selected monitor profile.</p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:374
#, kde-format
msgid "Use color managed view in editor"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:375
#, kde-format
msgid "<p>Turn on this option if you want to use your <b>Monitor Color Profile</b> to show your pictures in the Image Editor window with a color correction adapted to your monitor. You can at any time toggle this option from the Editor window. <i>Warning</i>: This can slow down rendering of the image, depending on the speed of your computer.</p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:382
#, kde-format
msgid "Use color managed view for previews and thumbnails"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:397
#, kde-format
msgid "Camera and Scanner"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:402
#, kde-format
msgid "Default input color profile:"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:404
#, kde-format
msgid "<p>This is the default color profile for your input device (that is your camera - or your scanner). A camera input profile is recommended for correct conversion of RAW images in 16bit. Some of the options about loading behavior above refer to this profile.</p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:411
#, kde-format
msgid "<p>You can use this button to get more detailed information about the selected input profile.</p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:422
#, kde-format
msgid "Printing and Proofing"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:427
#, kde-format
msgid "Output device profile:"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:436
#, kde-format
msgid "<p>You can use this button to get more detailed information about the selected proofing profile.</p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:447
#, kde-format
msgid "Color Profiles Repository"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:452
#, kde-format
msgid "digiKam looks for ICC profiles in a number of <a href='default'>default locations</a>. You can specify an additional folder:"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:460
#, kde-format
msgid "<p>digiKam searches ICC profiles in default system folders and ships itself a few selected profiles. Store all your additional color profiles in the directory set here.</p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:483
#, kde-format
msgid "Use black point compensation"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:484
#, kde-format
msgid "<p><b>Black Point Compensation</b> is a way to make adjustments between the maximum black levels of digital files and the black capabilities of various digital devices.</p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:490
#, kde-format
msgid "Rendering Intents:"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:506
#, kde-format
msgid "Profiles"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:700
#, kde-format
msgid "Monitor Profile From System Settings"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:732
#, kde-format
msgid "No ICC profiles files found."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:747
#, kde-format
msgid "No Display Profile Available"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:749
#, kde-format
msgid "No Output Profile Available"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:879
#, kde-format
msgctxt "none of the paths"
msgid "none"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:888
#, kde-format
msgid ""
"On Windows, the default search paths include "
"<ul>"
"<li>%1/Windows/Spool/Drivers/Color/</li>"
"<li>%2/Windows/Color/</li>"
"</ul>"
"On your system, currently these paths exist and are scanned:"
"<ul>"
"<li>%3</li>"
"</ul>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:902
#, kde-format
msgid ""
"On Mac OS X, the default search paths include "
"<ul>"
"<li>/System/Library/ColorSync/Profiles</li>"
"<li>/Library/ColorSync/Profiles</li>"
"<li>~/Library/ColorSync/Profiles</li>"
"<li>/opt/local/share/color/icc</li>"
"<li>/opt/digikam/share/color/icc</li>"
"<li>~/.local/share/color/icc/</li>"
"<li>~/.local/share/icc/</li>"
"<li>~/.color/icc/</li>"
"</ul>"
"On your system, currently these paths exist and are scanned:"
"<ul>"
"<li>%1</li>"
"</ul>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:919
#, kde-format
msgid ""
"On Linux, the default search paths include "
"<ul>"
"<li>/usr/share/color/icc</li>"
"<li>/usr/local/share/color/icc</li>"
"<li>~/.local/share/color/icc/</li>"
"<li>~/.local/share/icc/</li>"
"<li>~/.color/icc/</li>"
"</ul>"
"On your system, currently these paths exist and are scanned:"
"<ul>"
"<li>%1</li>"
"</ul>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuplighttable.cpp:99
#, kde-format
msgid "Synchronize panels automatically"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuplighttable.cpp:100
#, kde-format
msgid "Set this option to automatically synchronize zooming and panning between left and right panels if the images have the same size."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuplighttable.cpp:104
#, kde-format
msgid "Selecting a thumbbar item loads the image to the right panel"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuplighttable.cpp:106
#, kde-format
msgid "Set this option to automatically load an image into the right panel when the corresponding item is selected on the thumbbar."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuplighttable.cpp:109
#, kde-format
msgid "Clear the light table on close"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuplighttable.cpp:110
#, kde-format
msgid "Set this option to remove all images from the light table when you close it, or unset it to preserve the images currently on the light table."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:137
#, kde-format
msgid "String comparison type:"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:139
#, kde-format
msgctxt "method to compare strings"
msgid "Natural"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:140
#, kde-format
msgctxt "method to compare strings"
msgid "Normal"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:141
#, kde-format
msgid ""
"<qt>Sets the way in which strings are compared inside digiKam. This eg. influences the sorting of the tree views.<br/>"
"<b>Natural</b> tries to compare strings in a way that regards some normal conventions and will eg. result in sorting numbers naturally even if they have a different number of digits.<br/>"
"<b>Normal</b> uses a more technical approach. Use this style if you eg. want to entitle albums with ISO dates (201006 or 20090523) and the albums should be sorted according to these dates.</qt>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:151
#, kde-format
msgid "Confirm when moving items to the &trash"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:152
#, kde-format
msgid "Confirm when permanently deleting items"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:153
#, kde-format
msgid "Do not confirm when applying changes in the &right sidebar"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:154
#, kde-format
msgid "&Scan for new items at startup (makes startup slower)"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:155
#, kde-format
msgid ""
"Set this option to force digiKam to scan all collections for new items to\n"
"register new elements in database. The scan is performed in the background through\n"
"the progress manager available in the statusbar\n"
" when digiKam main interface\n"
"is loaded. If your computer is fast enough, this will have no effect on usability\n"
"of digiKam while scanning. If your collections are huge or if you use a remote database,\n"
"this can introduce low latency, and it is recommended to disable this option and to plan\n"
"a manual scan through the maintenance tool at the right moment."
"Set this option to force digiKam to clean up the core database from obsolete item entries.\n"
"Entries are only deleted if the connected image/video/audio file was already removed, i.e.\n"
"the database object wastes space.\n"
"This option does not clean up other databases as the thumbnails or recognition db.\n"
"For clean up routines for other databases, please use the maintenance."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:172
#, kde-format
msgid "Show only face tags for assigning names in people sidebar"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:177
#, kde-format
msgid "Lower bound for minimum similarity:"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:183
#, kde-format
msgid "Select here the lower bound of the minimum similarity threshold for fuzzy and duplicates searches. The default value is 40. Selecting a lower value than 40 can make the search <b>really</b> slow."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:213
#, kde-format
msgid "Use native file dialogs from system"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:214
#, kde-format
msgid "Draw frames around grouped items"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:221
#, kde-format
msgid "Set this option to configure how sidebar tab titles are visible. Use \"Only For Active Tab\" option if you use a small screen resolution as with a laptop computer."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:251
#, kde-format
msgctxt "icon theme"
msgid "Adwaita"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:252
#, kde-format
msgctxt "icon theme"
msgid "Breeze"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:253
#, kde-format
msgctxt "icon theme"
msgid "Breeze Dark"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:254
#, kde-format
msgctxt "icon theme"
msgid "Faenza"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:255
#, kde-format
msgctxt "icon theme"
msgid "Ambiance"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:256
#, kde-format
msgctxt "icon theme"
msgid "Humanity"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:257
#, kde-format
msgctxt "icon theme"
msgid "Oxygen"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:312
#, kde-format
msgid "Perform the following operations on all group members:"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:313
#, kde-format
msgid ""
"When images are grouped the following operations<br/>"
"are performed only on the displayed item (No)<br/>"
"or on all the hidden items in the group as well (Yes).<br/>"
"If Ask is selected, there will be a prompt every<br/>"
"time this operation is executed."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:321
#, kde-format
msgid "Ask"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:366
#, kde-format
msgctxt "@title:tab"
msgid "Grouping"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupplugins.cpp:94
#, kde-format
msgctxt "@title:tab"
msgid "Batch Queue Manager"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:114
#, kde-format
msgid "Delay between images:"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:118
#, kde-format
msgid "The delay, in seconds, between images."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:120
#, kde-format
msgid "Start with current image"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:121
#, kde-format
msgid "If this option is enabled, the Slideshow will be started with the current image selected in the images list."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:124
#, kde-format
msgid "Slideshow runs in a loop"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:125
#, kde-format
msgid "Run the slideshow in a loop."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:127
#, kde-format
msgid "Shuffle images"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:128
#, kde-format
msgid "If this option is enabled, the Slideshow will run in random order"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:130
#, kde-format
msgid "Show progress indicator"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:131
#, kde-format
msgid "Show a progress indicator with pending items to show and time progression."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:133
#, kde-format
msgid "Show image file name"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:134
#, kde-format
msgid "Show the image file name at the bottom of the screen."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:136
#, kde-format
msgid "Show image creation date"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:137
#, kde-format
msgid "Show the image creation time/date at the bottom of the screen."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:140
#, kde-format
msgid "Show the camera aperture and focal length at the bottom of the screen."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:143
#, kde-format
msgid "Show the camera exposure and sensitivity at the bottom of the screen."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:146
#, kde-format
msgid "Show the camera make and model at the bottom of the screen."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:148
#, kde-format
msgid "Show image caption"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:149
#, kde-format
msgid "Show the image caption at the bottom of the screen."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:151
#, kde-format
msgid "Show image title"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:152
#, kde-format
msgid "Show the image title at the bottom of the screen."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:154
#, kde-format
msgid "Show image caption if it has not title"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:155
#, kde-format
msgid "Show the image caption at the bottom of the screen if no titles existed."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:157
#, kde-format
msgid "Show image tags"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:158
#, kde-format
msgid "Show the digiKam image tag names at the bottom of the screen."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:160
#, kde-format
msgid "Show image labels"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:161
#, kde-format
msgid "Show the digiKam image color label and pick label at the bottom of the screen."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:163
#, kde-format
msgid "Show image rating"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:164
#, kde-format
msgid "Show the digiKam image rating at the bottom of the screen."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:166
#, kde-format
msgid "Caption font:"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:167
#, kde-format
msgid "Select here the font used to display text in the slideshow."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:170
#, kde-format
msgid "Screen placement:"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:172
#, kde-format
msgid "In case of multi-screen computer, select here the monitor to slide contents."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:175
#, kde-format
msgctxt "@label:listbox The current screen, for the presentation mode"
msgid "Current Screen"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:176
#, kde-format
msgctxt "@label:listbox The default screen for the presentation mode"
msgid "Default Screen"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:181
#, kde-format
msgctxt "@label:listbox %1 is the screen number (0, 1, ...)"
msgid "Screen %1"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptemplate.cpp:92
#, kde-format
msgid "Template Title:"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptemplate.cpp:95
#, kde-format
msgid "Enter the metadata template title here."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptemplate.cpp:96
#, kde-format
msgid "<p>Enter the metadata template title here. This title will be used to identify a template in your collection.</p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptemplate.cpp:106
#, kde-format
msgid "<b>Note: These information are used to set <b><a href='https://en.wikipedia.org/wiki/Extensible_Metadata_Platform'>XMP</a></b> and <b><a href='https://en.wikipedia.org/wiki/IPTC'>IPTC</a></b> tag contents. There is no limitation with XMP, but note that IPTC text tags only support the printable <b><a href='https://en.wikipedia.org/wiki/Ascii'>ASCII</a></b> character set, and tag sizes are limited. Use contextual help for details.</b>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptemplate.cpp:127
#, kde-format
msgid "&Replace..."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptemplate.cpp:244
#: core/utilities/setup/setuptemplate.cpp:273
#, kde-format
msgid "Cannot register new metadata template without title."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptemplate.cpp:250
#, kde-format
msgid "A metadata template named '%1' already exists."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:195
#, kde-format
msgid "Tool-Tips Font:"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:196
#, kde-format
msgid "Select here the font used to display text in tool-tips."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:204
#, kde-format
msgid "Show icon-view and thumb-bar items' tool-tips"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:205
#, kde-format
msgid "Set this option to display image information when the mouse hovers over an icon-view or thumb-bar item."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:208
#, kde-format
msgid "File/Item Information"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:211
#, kde-format
msgid "File name"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:214
#, kde-format
msgid "File date"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:217
#, kde-format
msgid "File size"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:220
#, kde-format
msgid "Image type"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:223
#, kde-format
msgid "Image dimensions"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:226
#, kde-format
msgid "Image aspect ratio"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:227
#, kde-format
msgid "Set this option to display the image aspect ratio."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:243
#: core/utilities/setup/setuptooltip.cpp:423
#, kde-format
msgid "Camera make and model"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:251
#, kde-format
msgid "Camera date"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:254
#: core/utilities/setup/setuptooltip.cpp:431
#, kde-format
msgid "Camera aperture and focal length"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:258
#: core/utilities/setup/setuptooltip.cpp:435
#, kde-format
msgid "Camera exposure and sensitivity"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:262
#, kde-format
msgid "Camera mode and program"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:266
#: core/utilities/setup/setuptooltip.cpp:439
#, kde-format
msgid "Camera flash settings"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:270
#: core/utilities/setup/setuptooltip.cpp:443
#, kde-format
msgid "Camera white balance settings"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:287
#, kde-format
msgid "digiKam Information"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:290
#: core/utilities/setup/setuptooltip.cpp:363
#, kde-format
msgid "Album name"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:291
#: core/utilities/setup/setuptooltip.cpp:364
#, kde-format
msgid "Set this option to display the album name."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:293
#, kde-format
msgid "Image title"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:294
#, kde-format
msgid "Set this option to display the image title."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:296
#, kde-format
msgid "Image caption"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:297
#, kde-format
msgid "Set this option to display the image captions."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:299
#, kde-format
msgid "Image tags"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:300
#, kde-format
msgid "Set this option to display the image tags."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:302
#, kde-format
msgid "Image labels"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:303
#, kde-format
msgid "Set this option to display the image pick, color, rating labels."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:315
#, kde-format
msgid "Audio/Video Information"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:318
#, kde-format
msgid "Video Aspect Ratio"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:319
#: core/utilities/setup/setuptooltip.cpp:334
#, kde-format
msgid "Set this option to display the Aspect Ratio of the Video."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:322
#, kde-format
msgid "Set this option to display the Audio Bit Rate of the Video."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:325
#, kde-format
msgid "Set this option to display the Audio Channel Type of the Video."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:328
#, kde-format
msgid "Set this option to display the Audio Codec of the Video."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:330
#, kde-format
msgid "Video Duration"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:331
#, kde-format
msgid "Set this option to display the Duration of the Video."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:333
#, kde-format
msgid "Video Frame Rate"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:337
#, kde-format
msgid "Set this option to display the Codec of the Video."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:357
#, kde-format
msgid "Show album items' tool-tips"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:358
#, kde-format
msgid "Album Information"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:360
#: core/utilities/setup/setuptooltip.cpp:401
#, kde-format
msgid "Set this option to display album information when the mouse hovers over a folder-view item."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:366
#, kde-format
msgid "Album date"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:367
#, kde-format
msgid "Set this option to display the album date."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:369
#, kde-format
msgid "Album collection"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:370
#, kde-format
msgid "Set this option to display the album collection."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:372
#, kde-format
msgid "Album category"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:373
#, kde-format
msgid "Set this option to display the album category."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:375
#, kde-format
msgid "Album caption"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:376
#, kde-format
msgid "Set this option to display the album caption."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:378
#, kde-format
msgid "Album preview"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:379
#, kde-format
msgid "Set this option to display the album preview."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:398
#, kde-format
msgid "Show import items' tool-tips"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:399
#, kde-format
msgid "Import Information"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:404
#, kde-format
msgid "Item name"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:405
#, kde-format
msgid "Set this option to display the item name."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:407
#, kde-format
msgid "Item date"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:408
#, kde-format
msgid "Set this option to display the item date."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:410
#, kde-format
msgid "Item size"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:411
#, kde-format
msgid "Set this option to display the item size."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:413
#, kde-format
msgid "Item type"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:414
#, kde-format
msgid "Set this option to display the item type."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:416
#, kde-format
msgid "Item dimensions"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:417
#, kde-format
msgid "Set this option to display the item dimensions."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:420
#, kde-format
msgid "Note: these settings require \"Use File Metadata\" option from Camera Setup Behavior page."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:470
#, kde-format
msgid "Icon Items"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:471
#, kde-format
msgid "Album Items"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:472
#, kde-format
msgid "Import Items"
msgstr ""
#. +> trunk5
#: core/utilities/slideshow/slideend.cpp:77
#, kde-format
msgid ""
"Slideshow Completed.\n"
"Click To Exit\n"
"or press ESC..."
msgstr ""
#. +> trunk5
#: core/utilities/slideshow/slideerror.cpp:88
#, kde-format
msgid ""
"An error has occurred to show item\n"
"%1"
msgstr ""
#. +> trunk5
#: core/utilities/slideshow/slidehelp.cpp:43
#, kde-format
msgid "Slideshow Usage"
msgstr ""
#. +> trunk5
#: core/utilities/slideshow/slidehelp.cpp:51
#, kde-format
msgid ""
"<qt>"
"<table>"
"<tr>"
"<td colspan=\"2\"><nobr>"
"<center><b>"
"<h1>Item Access</h1>"
"</b></center>"
"</nobr></td>"
"</tr>"
"<tr>"
"<td>Previous Item:</td>"
"<td><i>Up</i> key</td>"
"</tr>"
"<tr>"
"<td></td>"
"<td><i>PgUp</i> key</td>"
"</tr>"
"<tr>"
"<td></td>"
"<td><i>Left</i> key</td>"
"</tr>"
"<tr>"
"<td></td>"
"<td>Mouse wheel up</td>"
"<tr>"
"<td></td>"
"<td>Left mouse button</td>"
"</tr>"
"<tr>"
"<td>Next Item:</td>"
"<td><i>Down</i> key</td>"
"</tr>"
"<tr>"
"<td></td>"
"<td><i>PgDown</i> key</td>"
"</tr>"
"<tr>"
"<td></td>"
"<td><i>Right</i> key</td>"
"</tr>"
"<tr>"
"<td></td>"
"<td>Mouse wheel down</td>"
"</tr>"
"<tr>"
"<td></td>"
"<td>Right mouse button</td>"
"</tr>"
"<tr>"
"<td>Pause/Start:</td>"
"<td><i>Space</i> key</td>"
"</tr>"
"<tr>"
"<td>Hide/Show Properties:</td>"
"<td><i>F4</i> key</td>"
"</tr>"
"<tr>"
"<td>Quit:</td>"
"<td><i>Esc</i> key</td>"
"</tr>"
"<tr>"
"<td colspan=\"2\"><nobr>"
"<center><b>"
"<h1>Item Properties</h1>"
"</b></center>"
"</nobr></td>"
"</tr>"
"<tr>"
"<td>Change Tags:</td>"
"<td>Use Tags keyboard shortcuts</td>"
"</tr>"
"<tr>"
"<td>Change Rating:</td>"
"<td>Use Rating keyboard shortcuts</td>"
"</tr>"
"<tr>"
"<td>Change Color Label:</td>"
"<td>Use Color label keyboard shortcuts</td>"
"</tr>"
"<tr>"
"<td>Change Pick Label:</td>"
"<td>Use Pick label keyboard shortcuts</td>"
"</tr>"
"<tr>"
"<td colspan=\"2\"><nobr>"
"<center><b>"
"<h1>Others</h1>"
"</b></center>"
"</nobr></td>"
"</tr>"
"<tr>"
"<td>Show this help:</td>"
"<td><i>F1</i> key</td>"
"</tr>"
"</table>"
"</qt>"
msgstr ""
#. +> trunk5
#: core/utilities/slideshow/slideshow.cpp:588
#, kde-format
msgctxt "Reason for inhibiting the screensaver activation, when the presentation mode is active"
"<p>If disabled, macros will not be included in the code-completion results. This can improve the responsiveness of code-completion in some cases.</p>"
msgctxt "%1: macro type, i.e.: 'Function macro' or just 'Macro'%2: the macro name and arguments"
msgid "%1: %2"
msgstr ""
#. +> trunk5 stable5
#: duchain/macronavigationcontext.cpp:68
#, kde-format
msgid "Function macro"
msgstr ""
#. +> trunk5 stable5
#: duchain/macronavigationcontext.cpp:68
#, kde-format
msgid "Macro"
msgstr ""
#. +> trunk5 stable5
#: duchain/macronavigationcontext.cpp:71
#, kde-format
msgctxt "%1: the link to the definition"
msgid "Defined in: %1"
msgstr ""
#. +> trunk5 stable5
#: duchain/macronavigationcontext.cpp:75
#, kde-format
msgid "Show uses"
msgstr ""
#. +> trunk5 stable5
#: duchain/macronavigationcontext.cpp:78
#, kde-format
msgid "Body: "
msgstr ""
#. +> trunk5 stable5
#: duchain/missingincludepathproblem.cpp:50
#, kde-format
msgid "Add Custom Include Path"
msgstr ""
#. +> trunk5 stable5
#: duchain/missingincludepathproblem.cpp:73
#, kde-format
msgid "Open Project"
msgstr ""
#. +> trunk5 stable5
#: duchain/parsesession.cpp:506
#, kde-format
msgid "Requested here: %1"
msgstr ""
#. +> trunk5 stable5
#: duchain/parsesession.cpp:547
#, kde-format
msgid "In included file: %1"
msgstr ""
#. +> trunk5 stable5
#: duchain/parsesession.cpp:567
#, kde-format
msgid "Header is not guarded against multiple inclusions"
msgstr ""
#. +> trunk5 stable5
#: duchain/parsesession.cpp:568
#, kde-format
msgid "The given header is not guarded against multiple inclusions, either with the conventional #ifndef/#define/#endif macro guards or with #pragma once."
"<p>Regular expression matching the names of the headers to output diagnostics from. Diagnostics from the main file of each translation unit are always displayed. Can be used together with -line-filter.</p>"
msgid "Unable to find a CMake executable. Is one installed on the system?"
msgstr ""
#. +> trunk5 stable5
#: cmakedocumentation.cpp:95
#, kde-format
msgid ""
"<br />"
"<em>Cache Value:</em> %1\n"
msgstr ""
#. +> trunk5 stable5
#: cmakedocumentation.cpp:98
#, kde-format
msgid ""
"<br />"
"<em>Cache Documentation:</em> %1\n"
msgstr ""
#. +> trunk5 stable5
#: cmakehelpdocumentation.cpp:34
#, kde-format
msgid "CMake Content Page"
msgstr ""
#. +> trunk5 stable5
-#: cmakemanager.cpp:80
+#: cmakemanager.cpp:82
#, kde-format
msgid "KDevelop - CMake Support"
msgstr ""
#. +> trunk5
-#: cmakemanager.cpp:870
+#: cmakemanager.cpp:872
#, kde-format
msgid ""
"Failed to configure project '%1' (error message: %2). As a result, KDevelop's code understanding will likely be broken.\n"
"\n"
"To fix this issue, please ensure that the project's CMakeLists.txt files are correct, and KDevelop is configured to use the correct CMake version and settings. Then right-click the project item in the projects tool view and click 'Reload'."
msgstr ""
#. +> stable5
#: cmakemanager.cpp:870
#, kde-format
msgid ""
"Failed to configure the project (error message: %1). As a result, KDevelop's code understanding will likely be broken.\n"
"\n"
"To fix this issue, please ensure that the project's CMakeLists.txt files are correct, and KDevelop is configured to use the correct CMake version and settings. Then right-click the project item in the projects tool view and click 'Reload'."
msgid "Allow that Cppcheck reports even though the analysis is inconclusive. There are false positives with this option. Each result must be carefully investigated before you know if it is good or bad."
"<p>Force checking of files that have a lot of configurations. Error is printed if such a file is found so there is no reason to use this by default. If used together with '--max-configs=', the last option is the one that is effective.<br/>"
"<br/>"
"Be careful with using this option - it can dramatically slow checking.</p>"
msgid "It seems that this project uses Qt library. For correctly work of cppcheck the value for define Q_MOC_OUTPUT_REVISION must be set. Unfortunately, the plugin is unable to find this value automatically - you should set it manually by adding '-DQ_MOC_OUTPUT_REVISION=XX' to extra parameters. The 'XX' value can be found in any project's moc-generated file or in the <QtCore/qobjectdefs.h> header file."
msgstr ""
#. +> trunk5 stable5
-#: parser.cpp:233
+#: parser.cpp:234
#, kde-format
msgid "Cppcheck XML Parsing: error at line %1, column %2: %3"
msgstr ""
#. +> trunk5 stable5
#: plugin.cpp:64
#, kde-format
msgid "Analyze Current File with Cppcheck"
msgstr ""
#. +> trunk5 stable5
#: plugin.cpp:75
#, kde-format
msgid "Analyze Current Project with Cppcheck"
msgstr ""
#. +> trunk5 stable5
#: plugin.cpp:126
#, kde-format
msgctxt "@title:window"
msgid "Test"
msgstr ""
#. +> trunk5 stable5
#: problemmodel.cpp:130
#, kde-format
msgid "Analysis completed, no problems detected."
msgstr ""
#. +> trunk5 stable5
#: problemmodel.cpp:151
#, kde-format
msgid "Analysis started..."
msgstr ""
#. +> trunk5 stable5
#: problemmodel.cpp:152
#, kde-format
msgctxt "@info:tooltip %1 is the path of the file"
msgid "<p>The debugger component encountered an internal error while processing the reply from the debugger. Please submit a bug report. The debug session will now end to prevent potential crash"
msgstr ""
#. +> trunk5 stable5
-#: midebugger.cpp:323
+#: midebugger.cpp:327
#, kde-format
msgid ""
"The exception is: %1\n"
"The MI response is: %2"
msgstr ""
#. +> trunk5 stable5
-#: midebugger.cpp:326
+#: midebugger.cpp:330
#, kde-format
msgid "Internal debugger error"
msgstr ""
#. +> trunk5 stable5
-#: midebugger.cpp:338 midebugsession.cpp:467
+#: midebugger.cpp:342 midebugsession.cpp:469
#, kde-format
msgid "Process exited"
msgstr ""
#. +> trunk5 stable5
-#: midebugger.cpp:348
+#: midebugger.cpp:351
#, kde-format
msgid ""
"<b>Could not start debugger.</b>"
"<p>Could not run '%1'. Make sure that the path name is specified correctly."
msgstr ""
-#. +> trunk5 stable5
+#. +> stable5
#: midebugger.cpp:352
#, kde-format
msgid "Could not start debugger"
msgstr ""
#. +> trunk5 stable5
-#: midebugger.cpp:355
+#: midebugger.cpp:359
#, kde-format
msgid "Process failed to start"
msgstr ""
#. +> trunk5 stable5
-#: midebugger.cpp:360
+#: midebugger.cpp:364
#, kde-format
msgid ""
"<b>Debugger crashed.</b>"
"<p>The debugger process '%1' crashed.<br>"
"Because of that the debug session has to be ended.<br>"
"Try to reproduce the crash without KDevelop and report a bug.<br>"
msgstr ""
#. +> trunk5 stable5
-#: midebugger.cpp:365
+#: midebugger.cpp:369
#, kde-format
msgid "Debugger crashed"
msgstr ""
#. +> trunk5 stable5
-#: midebugger.cpp:368
+#: midebugger.cpp:372
#, kde-format
msgid "Process crashed"
msgstr ""
#. +> trunk5 stable5
-#: midebuggerplugin.cpp:125
+#: midebuggerplugin.cpp:126
#, kde-format
msgid "Examine Core File with %1"
msgstr ""
#. +> trunk5 stable5
-#: midebuggerplugin.cpp:126
+#: midebuggerplugin.cpp:127
#, kde-format
msgid ""
"<b>Examine core file</b>"
"<p>This loads a core file, which is typically created after the application has crashed, e.g. with a segmentation fault. The core file contains an image of the program memory at the time it crashed, allowing you to do a post-mortem analysis.</p>"
msgstr ""
#. +> trunk5 stable5
-#: midebuggerplugin.cpp:138
+#: midebuggerplugin.cpp:139
#, kde-format
msgid "Attach to Process with %1"
msgstr ""
#. +> trunk5 stable5
-#: midebuggerplugin.cpp:139
+#: midebuggerplugin.cpp:140
#, kde-format
msgid ""
"<b>Attach to process</b>"
"<p>Attaches the debugger to a running process.</p>"
msgstr ""
#. +> trunk5 stable5
-#: midebuggerplugin.cpp:174
+#: midebuggerplugin.cpp:175
#, kde-format
msgid "KDevelop (%1) - %2"
msgstr ""
#. +> trunk5 stable5
-#: midebuggerplugin.cpp:224
+#: midebuggerplugin.cpp:225
#, kde-format
msgid "Evaluate: %1"
msgstr ""
#. +> trunk5 stable5
-#: midebuggerplugin.cpp:225
+#: midebuggerplugin.cpp:226
#, kde-format
msgid ""
"<b>Evaluate expression</b>"
"<p>Shows the value of the expression under the cursor.</p>"
msgstr ""
#. +> trunk5 stable5
-#: midebuggerplugin.cpp:233
+#: midebuggerplugin.cpp:234
#, kde-format
msgid "Watch: %1"
msgstr ""
#. +> trunk5 stable5
-#: midebuggerplugin.cpp:234
+#: midebuggerplugin.cpp:235
#, kde-format
msgid ""
"<b>Watch expression</b>"
"<p>Adds the expression under the cursor to the Variables/Watch list.</p>"
msgid "A program is already being debugged. Do you want to abort the currently running debug session and continue?"
msgstr ""
#. +> trunk5 stable5
-#: midebuggerplugin.cpp:265
+#: midebuggerplugin.cpp:266
#, kde-format
msgid "Choose a process to attach to..."
msgstr ""
#. +> trunk5 stable5
-#: midebuggerplugin.cpp:287
+#: midebuggerplugin.cpp:288
#, kde-format
msgid "Not attaching to process %1: cannot attach the debugger to itself."
msgstr ""
#. +> trunk5 stable5
-#: midebuggerplugin.cpp:304
+#: midebuggerplugin.cpp:308
#, kde-format
msgid "Debugger"
msgstr ""
#. +> trunk5 stable5
#: midebugjobs.cpp:64
#, kde-format
msgctxt "ProjectName: run configuration name"
msgid "%1: %2"
msgstr ""
#. +> trunk5 stable5
#: midebugjobs.cpp:88
#, kde-format
msgid "'%1' is not an executable"
msgstr ""
#. +> trunk5 stable5
#: midebugjobs.cpp:162
#, kde-format
msgid "Debug core file"
msgstr ""
#. +> trunk5 stable5
#: midebugjobs.cpp:200
#, kde-format
msgid "Debug process %1"
msgstr ""
#. +> trunk5 stable5
-#: midebugsession.cpp:218
+#: midebugsession.cpp:219
#, kde-format
msgid "Running program"
msgstr ""
-#. +> trunk5 stable5
-#: midebugsession.cpp:252
+#. +> stable5
+#: midebugsession.cpp:253
#, kde-format
msgid "warning"
msgstr ""
#. +> trunk5 stable5
-#: midebugsession.cpp:294
+#: midebugsession.cpp:296
#, kde-format
msgid "Attaching to process %1"
msgstr ""
#. +> trunk5 stable5
-#: midebugsession.cpp:327
+#: midebugsession.cpp:328
#, kde-format
msgid "<b>Could not attach debugger:</b><br />"
msgstr ""
-#. +> trunk5 stable5
-#: midebugsession.cpp:329
+#. +> stable5
+#: midebugsession.cpp:330
#, kde-format
msgid "Startup error"
msgstr ""
#. +> trunk5 stable5
-#: midebugsession.cpp:336
+#: midebugsession.cpp:338
#, kde-format
msgid "Examining core file %1"
msgstr ""
#. +> trunk5 stable5
-#: midebugsession.cpp:452
+#: midebugsession.cpp:454
#, kde-format
msgid "Debugger stopped"
msgstr ""
+#. +> stable5
+#: midebugsession.cpp:1282
+#, kde-format
+msgid "Debugger error"
+msgstr ""
+
+#. +> stable5
+#: debugsession.cpp:295
+#, kde-format
+msgid "gdb error"
+msgstr ""
+
#. +> trunk5 stable5
-#: midebugsession.cpp:472
+#: midebugsession.cpp:474
#, kde-format
msgid "Application is running"
msgstr ""
#. +> trunk5 stable5
-#: midebugsession.cpp:477
+#: midebugsession.cpp:479
#, kde-format
msgid "Application is paused"
msgstr ""
#. +> trunk5 stable5
-#: midebugsession.cpp:769
+#: midebugsession.cpp:770
#, kde-format
msgid ""
"<b>Gdb command sent when debugger is not running</b><br>"
"The command was:<br>"
" %1"
msgstr ""
-#. +> trunk5 stable5
-#: midebugsession.cpp:771
+#. +> stable5
+#: midebugsession.cpp:772
#, kde-format
msgid "Internal error"
msgstr ""
#. +> trunk5 stable5
-#: midebugsession.cpp:885
+#: midebugsession.cpp:886
#, kde-format
msgid ""
"<b>Invalid debugger command</b><br>"
"%1"
msgstr ""
-#. +> trunk5 stable5
-#: midebugsession.cpp:886
+#. +> stable5
+#: midebugsession.cpp:887
#, kde-format
msgid "Invalid debugger command"
msgstr ""
#. +> trunk5 stable5
-#: midebugsession.cpp:1020
+#: midebugsession.cpp:1022
#, kde-format
msgid "Exited with return code: %1"
msgstr ""
#. +> trunk5 stable5
-#: midebugsession.cpp:1022
+#: midebugsession.cpp:1024
#, kde-format
msgid "Exited normally"
msgstr ""
#. +> trunk5 stable5
-#: midebugsession.cpp:1029
+#: midebugsession.cpp:1031
#, kde-format
msgid "Exited on signal %1"
msgstr ""
#. +> trunk5 stable5
-#: midebugsession.cpp:1064
+#: midebugsession.cpp:1066
#, kde-format
msgid "Program received signal %1 (%2)"
msgstr ""
#. +> trunk5 stable5
-#: midebugsession.cpp:1196
+#: midebugsession.cpp:1198
#, kde-format
msgid "1 command in queue\n"
msgid_plural "%1 commands in queue\n"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
-#: midebugsession.cpp:1197
+#: midebugsession.cpp:1199
#, kde-format
msgctxt "Only the 0 and 1 cases need to be translated"
msgid "1 command being processed by gdb\n"
msgid_plural "%1 commands being processed by gdb\n"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
-#: midebugsession.cpp:1198
+#: midebugsession.cpp:1200
#, kde-format
msgid "Debugger state: %1\n"
msgstr ""
+#. +> stable5
+#: midebugsession.cpp:1213
+#, kde-format
+msgid "Debugger status"
+msgstr ""
+
#. +> trunk5 stable5
-#: midebugsession.cpp:1201
+#: midebugsession.cpp:1203
#, kde-format
msgid ""
"Current command class: '%1'\n"
"Current command text: '%2'\n"
"Current command original text: '%3'\n"
msgstr ""
#. +> trunk5 stable5
-#: midebugsession.cpp:1212
-#, kde-format
-msgid "Debugger status"
-msgstr ""
-
-#. +> trunk5 stable5
-#: midebugsession.cpp:1278
+#: midebugsession.cpp:1279
#, kde-format
msgid ""
"<b>Debugger error</b>"
"<p>Debugger reported the following error:"
"<p><tt>%1"
msgstr ""
#. +> trunk5 stable5
-#: midebugsession.cpp:1281
-#, kde-format
-msgid "Debugger error"
-msgstr ""
-
-#. +> trunk5 stable5
#: miframestackmodel.cpp:84
#, kde-format
msgid "(running)"
msgstr ""
#. +> trunk5 stable5
#: registers/converters.cpp:30
#, kde-format
msgid "Binary"
msgstr ""
#. +> trunk5 stable5
#: registers/converters.cpp:30
#, kde-format
msgid "Octal"
msgstr ""
#. +> trunk5 stable5
#: registers/converters.cpp:30
#, kde-format
msgid "Decimal"
msgstr ""
#. +> trunk5 stable5
#: registers/converters.cpp:30
#, kde-format
msgid "Hexadecimal"
msgstr ""
#. +> trunk5 stable5
#: registers/converters.cpp:30
#, kde-format
msgid "Raw"
msgstr ""
#. +> trunk5 stable5
#: registers/converters.cpp:30
#, kde-format
msgid "Unsigned"
msgstr ""
#. +> trunk5 stable5
#: registers/registercontroller_arm.cpp:114
#: registers/registercontroller_x86.cpp:114
#, kde-format
msgid "General"
msgstr ""
#. +> trunk5 stable5
#: registers/registercontroller_arm.cpp:114
#: registers/registercontroller_x86.cpp:114
#, kde-format
msgid "Flags"
msgstr ""
#. +> trunk5 stable5
#: registers/registercontroller_arm.cpp:114
#, kde-format
msgid "VFP single-word"
msgstr ""
#. +> trunk5 stable5
#: registers/registercontroller_arm.cpp:114
#, kde-format
msgid "VFP double-word"
msgstr ""
#. +> trunk5 stable5
#: registers/registercontroller_arm.cpp:114
#, kde-format
msgid "VFP quad-word"
msgstr ""
#. +> trunk5 stable5
#: registers/registercontroller_x86.cpp:114
#, kde-format
msgid "FPU"
msgstr ""
#. +> trunk5 stable5
#: registers/registercontroller_x86.cpp:114
#, kde-format
msgid "XMM"
msgstr ""
#. +> trunk5 stable5
#: registers/registercontroller_x86.cpp:114
#, kde-format
msgid "Segment"
msgstr ""
#. +> trunk5 stable5
#: registers/registersview.cpp:65
#, kde-format
msgid "Format"
msgstr ""
#. +> trunk5 stable5
#: registers/registersview.cpp:74
#, kde-format
msgid "Mode"
msgstr ""
#. +> trunk5 stable5
#: registers/registersview.cpp:209
#, kde-format
msgid "Update"
msgstr ""
#. +> trunk5 stable5
#: stty.cpp:253
#, kde-format
msgid ""
"Cannot use the tty* or pty* devices.\n"
"Check the settings on /dev/tty* and /dev/pty*\n"
"As root you may need to \"chmod ug+rw\" tty* and pty* devices and/or add the user to the tty group using \"usermod -aG tty username\"."
msgstr ""
#. +> trunk5 stable5
#: stty.cpp:305
#, kde-format
msgid "%1 is incorrect terminal name"
msgstr ""
#. +> trunk5 stable5
#: stty.cpp:311
#, kde-format
msgid "Can't create a temporary file"
msgstr ""
#. +> trunk5 stable5
#: stty.cpp:358
#, kde-format
msgid "Can't receive %1 tty/pty. Check that %1 is actually a terminal and that it accepts these arguments: -e sh -c \"tty> %2 ;exec<&-;exec>&-;while :;do sleep 3600;done\""
msgid "Sets the execution pointer to the current cursor position."
msgstr ""
#. +> trunk5 stable5
#: widgets/disassemblewidget.cpp:111
#, kde-format
msgid "&Run to Cursor"
msgstr ""
#. +> trunk5 stable5
#: widgets/disassemblewidget.cpp:112
#, kde-format
msgid "Continues execution until the cursor position is reached."
msgstr ""
#. +> trunk5 stable5
#: widgets/disassemblewidget.cpp:115
#, kde-format
msgid "&AT&&T"
msgstr ""
#. +> trunk5 stable5
#: widgets/disassemblewidget.cpp:116
#, kde-format
msgid "GDB will use the AT&T disassembly flavor (e.g. mov 0xc(%ebp),%eax)."
msgstr ""
#. +> trunk5 stable5
#: widgets/disassemblewidget.cpp:120
#, kde-format
msgid "&Intel"
msgstr ""
#. +> trunk5 stable5
#: widgets/disassemblewidget.cpp:121
#, kde-format
msgid "GDB will use the Intel disassembly flavor (e.g. mov eax, DWORD PTR [ebp+0xc])."
msgstr ""
#. +> trunk5 stable5
#: widgets/disassemblewidget.cpp:158
#, kde-format
msgid "Disassembly flavor"
msgstr ""
#. +> trunk5 stable5
#: widgets/disassemblewidget.cpp:189
#, kde-format
msgid ""
"<b>Machine code display</b>"
"<p>A machine code view into your running executable with the current instruction highlighted. You can step instruction by instruction using the debuggers toolbar buttons of \"step over\" instruction and \"step into\" instruction."
msgid "<p>By default applications will be run in the background and only their output will be displayed in a tool view. This makes it impossible to interact with applications requiring user input from a terminal emulator. To run such applications, you should use an external terminal.</p>"
msgid "The selected action will be run before the executable is started. This allows there to be parts of a project, upon which the executable does not directly depend, to be built and/or installed before running the application."
"<p>Tracing is a mechanism to automatically print values of the chosen expressions and continue execution when breakpoint is hit. You can think of it as printf debugging that does not require modifying the source.</p>"
msgid "To run \"gdb\" executable from $PATH, leave this field empty. To run custom gdb, for example, for a different architecture, enter the executable name here. You can either run gdb from $PATH, but with a different name (say, \"arm-gdb\"), by typing the name here, or specify full path to the gdb executable."
"<p>If you want gdb to be executed by a special shell script, which for example properly sets the library path, insert it here e.g.: /path/to/script.sh --scriptArguments</p>"
"<p>Note: your script'll be invoked like this: /path/to/script.sh --scriptArguments debugger --debuggerArguments. So script.sh <span style=\" font-weight:600;\">must</span> invoke \"debugger\" executable manually.</p>"
msgid "Breakpoint is <a href=\"pending\">pending</a>"
msgstr ""
#. +> trunk5 stable5
#: debugger/breakpoint/breakpointdetails.cpp:130
#, kde-format
msgid "Breakpoint is <a href=\"dirty\">dirty</a>"
msgstr ""
#. +> trunk5 stable5
#: debugger/breakpoint/breakpointdetails.cpp:133
#, kde-format
msgid "Breakpoint is active"
msgstr ""
#. +> trunk5 stable5
#: debugger/breakpoint/breakpointdetails.cpp:140
#, kde-format
msgid "Hit %1 time"
msgid_plural "Hit %1 times"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: debugger/breakpoint/breakpointdetails.cpp:144
#, kde-format
msgid "Breakpoint has errors"
msgstr ""
#. +> trunk5 stable5
#: debugger/breakpoint/breakpointdetails.cpp:157
#, kde-format
msgid ""
"<b>Breakpoint is pending</b>"
"<p>Pending breakpoints are those that have been passed to GDB, but which are not yet installed in the target, because GDB cannot find the function or file to which the breakpoint refers. The most common case is a breakpoint in a shared library: GDB will insert this breakpoint only when the library is loaded.</p>"
msgstr ""
#. +> trunk5 stable5
#: debugger/breakpoint/breakpointdetails.cpp:170
#, kde-format
msgid ""
"<b>Breakpoint is dirty</b>"
"<p>The breakpoint has not yet been passed to the debugger.</p>"
msgid "Displays a list of breakpoints with their current status. Clicking on a breakpoint item allows you to change the breakpoint and will take you to the source in the editor window."
msgid "<b>Frame stack</b>Often referred to as the \"call stack\", this is a list showing which function is currently active, and what called each function to get to this point in your program. By clicking on an item you can see the values in any of the previous calling functions."
"<b>Variable tree</b>The variable tree allows you to see the values of local variables and arbitrary expressions.<br />"
"Local variables are displayed automatically and are updated as you step through your program. For each expression you enter, you can either evaluate it once, or \"watch\" it (make it auto-updated). Expressions that are not auto-updated can be updated manually from the context menu. Expressions can be renamed to more descriptive names by clicking on the name column.<br />"
"To change the value of a variable or an expression, click on the value.<br />"
msgstr ""
#. +> trunk5 stable5
#: debugger/variable/variablewidget.cpp:114
#, kde-format
msgid "<b>Expression entry</b>Type in expression to watch."
msgid "This list should contain targets that the application does not directly depend on, but for which an action needs to be taken before running the application."
msgid "Co-maintainer, C++/Clang, QA, Windows Support, Performance, Website"
msgstr ""
#. +> stable5
#: shell/core.cpp:118
#, kde-format
msgid "Sven Brauch"
msgstr ""
#. +> stable5
#: shell/core.cpp:118
#, kde-format
msgid "Co-maintainer, AppImage, Python Support, User Interface improvements"
msgstr ""
#. +> stable5
#: shell/core.cpp:119
#, kde-format
msgid "Friedrich W. H. Kossebau"
msgstr ""
#. +> trunk5 stable5
#: shell/core.cpp:126
#, kde-format
msgid "Could not find any plugins"
msgstr ""
#. +> trunk5 stable5
#: shell/core.cpp:127
#, kde-format
msgid ""
"<p>Could not find any plugins during startup.<br/>"
"Please make sure QT_PLUGIN_PATH is set correctly.</p>"
"Refer to <a href=\"https://community.kde.org/Guidelines_and_HOWTOs/Build_from_source#Set_up_the_runtime_environment\">this article</a> for more information."
msgstr ""
#. +> trunk5 stable5
#: shell/debugcontroller.cpp:105
#, kde-format
msgid "Debugger"
msgstr ""
#. +> trunk5 stable5
#: shell/debugcontroller.cpp:123
#, kde-format
msgid "Frame Stack"
msgstr ""
#. +> trunk5 stable5
#: shell/debugcontroller.cpp:129
#, kde-format
msgid "Breakpoints"
msgstr ""
#. +> trunk5 stable5
#: shell/debugcontroller.cpp:135
#, kde-format
msgid "Variables"
msgstr ""
#. +> trunk5 stable5
#: shell/debugcontroller.cpp:201
#, kde-format
msgid "&Restart"
msgstr ""
#. +> trunk5 stable5
#: shell/debugcontroller.cpp:202
#, kde-format
msgid "Restart program"
msgstr ""
#. +> trunk5 stable5
#: shell/debugcontroller.cpp:203
#, kde-format
msgid "Restarts applications from the beginning."
msgstr ""
#. +> trunk5 stable5
#: shell/debugcontroller.cpp:209
#, kde-format
msgid "Interrupt"
msgstr ""
#. +> trunk5 stable5
#: shell/debugcontroller.cpp:210
#, kde-format
msgid "Interrupt application"
msgstr ""
#. +> trunk5 stable5
#: shell/debugcontroller.cpp:211
#, kde-format
msgid "Interrupts the debugged process or current debugger command."
msgstr ""
#. +> trunk5 stable5
#: shell/debugcontroller.cpp:215
#, kde-format
msgid "Run to &Cursor"
msgstr ""
#. +> trunk5 stable5
#: shell/debugcontroller.cpp:216
#, kde-format
msgid "Run to cursor"
msgstr ""
#. +> trunk5 stable5
#: shell/debugcontroller.cpp:217
#, kde-format
msgid "Continues execution until the cursor position is reached."
msgstr ""
#. +> trunk5 stable5
#: shell/debugcontroller.cpp:222
#, kde-format
msgid "Set E&xecution Position to Cursor"
msgstr ""
#. +> trunk5 stable5
#: shell/debugcontroller.cpp:223
#, kde-format
msgid "Jump to cursor"
msgstr ""
#. +> trunk5 stable5
#: shell/debugcontroller.cpp:224
#, kde-format
msgid "Continue execution from the current cursor position."
msgstr ""
#. +> trunk5 stable5
#: shell/debugcontroller.cpp:228
#, kde-format
msgid "Step &Over"
msgstr ""
#. +> trunk5 stable5
#: shell/debugcontroller.cpp:230
#, kde-format
msgid "Step over the next line"
msgstr ""
#. +> trunk5 stable5
#: shell/debugcontroller.cpp:231
#, kde-format
msgid "Executes one line of source in the current source file. If the source line is a call to a function the whole function is executed and the app will stop at the line following the function call."
msgstr ""
#. +> trunk5 stable5
#: shell/debugcontroller.cpp:239
#, kde-format
msgid "Step over Ins&truction"
msgstr ""
#. +> trunk5 stable5
#: shell/debugcontroller.cpp:240
#, kde-format
msgid "Step over instruction"
msgstr ""
#. +> trunk5 stable5
#: shell/debugcontroller.cpp:241
#, kde-format
msgid "Steps over the next assembly instruction."
msgstr ""
#. +> trunk5 stable5
#: shell/debugcontroller.cpp:246
#, kde-format
msgid "Step &Into"
msgstr ""
#. +> trunk5 stable5
#: shell/debugcontroller.cpp:248
#, kde-format
msgid "Step into the next statement"
msgstr ""
#. +> trunk5 stable5
#: shell/debugcontroller.cpp:249
#, kde-format
msgid "Executes exactly one line of source. If the source line is a call to a function then execution will stop after the function has been entered."
msgstr ""
#. +> trunk5 stable5
#: shell/debugcontroller.cpp:256
#, kde-format
msgid "Step into I&nstruction"
msgstr ""
#. +> trunk5 stable5
#: shell/debugcontroller.cpp:257
#, kde-format
msgid "Step into instruction"
msgstr ""
#. +> trunk5 stable5
#: shell/debugcontroller.cpp:258
#, kde-format
msgid "Steps into the next assembly instruction."
msgstr ""
#. +> trunk5 stable5
#: shell/debugcontroller.cpp:262
#, kde-format
msgid "Step O&ut"
msgstr ""
#. +> trunk5 stable5
#: shell/debugcontroller.cpp:264
#, kde-format
msgid "Step out of the current function"
msgstr ""
#. +> trunk5 stable5
#: shell/debugcontroller.cpp:265
#, kde-format
msgid "Executes the application until the currently executing function is completed. The debugger will then display the line after the original call to that function. If program execution is in the outermost frame (i.e. in main()) then this operation has no effect."
msgstr ""
#. +> trunk5 stable5
#: shell/debugcontroller.cpp:273
#, kde-format
msgid "Toggle Breakpoint"
msgstr ""
#. +> trunk5 stable5
#: shell/debugcontroller.cpp:274
#, kde-format
msgid "Ctrl+Alt+B"
msgstr ""
#. +> trunk5 stable5
#: shell/debugcontroller.cpp:275
#, kde-format
msgid "Toggle breakpoint"
msgstr ""
#. +> trunk5 stable5
#: shell/debugcontroller.cpp:276
#, kde-format
msgid "Toggles the breakpoint at the current line in editor."
msgstr ""
#. +> trunk5 stable5
#: shell/debugcontroller.cpp:280
#, kde-format
msgid "Show Current Line"
msgstr ""
#. +> trunk5 stable5
#: shell/debugcontroller.cpp:281
#, kde-format
msgid "Show the current execution position"
msgstr ""
#. +> trunk5 stable5
#: shell/debugcontroller.cpp:282
#, kde-format
msgid "Jumps to the execution line in the editor."
msgid "Executes the target or the program specified in currently active launch configuration inside a Debugger."
msgstr ""
#. +> trunk5 stable5
#: shell/debugcontroller.cpp:442
#, kde-format
msgid "&Continue"
msgstr ""
#. +> trunk5 stable5
#: shell/debugcontroller.cpp:444
#, kde-format
msgid "Continue application execution"
msgstr ""
#. +> trunk5 stable5
#: shell/debugcontroller.cpp:445
#, kde-format
msgid "Continues the execution of your application in the debugger. This only takes effect when the application has been halted by the debugger (i.e. a breakpoint has been activated or the interrupt was pressed)."
msgid "Unable to create hidden dir (%1) for developer file"
msgstr ""
#. +> trunk5 stable5
-#: shell/project.cpp:278
+#: shell/project.cpp:281
#, kde-format
msgid "Unable to get project file: %1"
msgstr ""
#. +> trunk5 stable5
-#: shell/project.cpp:317
+#: shell/project.cpp:321
#, kde-format
msgid "Could not load %1, a project with the same name '%2' is already open."
msgstr ""
-#. +> trunk5 stable5
+#. +> trunk5
+#: shell/project.cpp:352
+#, kde-format
+msgid ""
+"Could not load project management plugin <b>%1</b>.<br>"
+"Check that the required programs are installed, or see console output for more information."
+msgstr ""
+
+#. +> stable5
#: shell/project.cpp:347
#, kde-format
msgid ""
"Could not load project management plugin <b>%1</b>.<br>"
" Check that the required programs are installed, or see console output for more information."
msgstr ""
-#. +> trunk5 stable5
+#. +> trunk5
+#: shell/project.cpp:362
+#, kde-format
+msgid "The project importing plugin (%1) does not support the IProjectFileManager interface."
+msgstr ""
+
+#. +> stable5
#: shell/project.cpp:356
#, kde-format
msgid "project importing plugin (%1) does not support the IProjectFileManager interface."
msgstr ""
-#. +> trunk5 stable5
+#. +> trunk5
+#: shell/project.cpp:415
+#, kde-format
+msgid "Could not open project."
+msgstr ""
+
+#. +> stable5
#: shell/project.cpp:408
#, kde-format
msgid "Could not open project"
msgstr ""
#. +> trunk5 stable5
-#: shell/project.cpp:565
+#: shell/project.cpp:573
#, kde-format
msgid ""
"Could not store developer specific project configuration.\n"
"Attention: The project settings you changed will be lost."
msgstr ""
#. +> trunk5 stable5
-#: shell/projectcontroller.cpp:173
+#: shell/projectcontroller.cpp:174
#, kde-format
msgid "Configure Project %1"
msgstr ""
#. +> trunk5 stable5
#: shell/projectcontroller.cpp:317
#, kde-format
msgid "Invalid Location: %1"
msgstr ""
#. +> trunk5 stable5
-#: shell/projectcontroller.cpp:324
-#, kde-format
-msgid "Project already being opened"
-msgstr ""
-
-#. +> trunk5 stable5
-#: shell/projectcontroller.cpp:325
+#: shell/projectcontroller.cpp:327
#, kde-format
msgid "Already opening %1, not opening again"
msgstr ""
#. +> trunk5 stable5
-#: shell/projectcontroller.cpp:482
+#: shell/projectcontroller.cpp:485
#, kde-format
msgid "Override"
msgstr ""
#. +> trunk5 stable5
-#: shell/projectcontroller.cpp:483
+#: shell/projectcontroller.cpp:486
#, kde-format
msgctxt "@info:tooltip"
msgid "Continue to open the project and use the just provided project configuration."
msgstr ""
#. +> trunk5 stable5
-#: shell/projectcontroller.cpp:486
+#: shell/projectcontroller.cpp:489
#, kde-format
msgid "Open Existing File"
msgstr ""
#. +> trunk5 stable5
-#: shell/projectcontroller.cpp:487
+#: shell/projectcontroller.cpp:490
#, kde-format
msgctxt "@info:tooltip"
msgid "Continue to open the project but use the existing project configuration."
msgstr ""
#. +> trunk5 stable5
-#: shell/projectcontroller.cpp:490
+#: shell/projectcontroller.cpp:493
#, kde-format
msgctxt "@info:tooltip"
msgid "Cancel and do not open the project."
msgstr ""
#. +> trunk5 stable5
-#: shell/projectcontroller.cpp:492
+#: shell/projectcontroller.cpp:495
#, kde-format
msgid ""
"There already exists a project configuration file at %1.\n"
"Do you want to override it or open the existing file?"
msgstr ""
#. +> trunk5 stable5
-#: shell/projectcontroller.cpp:494
+#: shell/projectcontroller.cpp:497
#, kde-format
msgid "Override existing project configuration"
msgstr ""
#. +> trunk5 stable5
-#: shell/projectcontroller.cpp:515
+#: shell/projectcontroller.cpp:517
#, kde-format
msgid "Unable to create configuration file %1"
msgstr ""
#. +> trunk5 stable5
-#: shell/projectcontroller.cpp:527
+#: shell/projectcontroller.cpp:531
#, kde-format
msgid "Reopen the current project?"
msgstr ""
#. +> trunk5 stable5
-#: shell/projectcontroller.cpp:566
+#: shell/projectcontroller.cpp:570
#, kde-format
msgctxt "@action"
msgid "Open / Import Project..."
msgstr ""
#. +> trunk5 stable5
-#: shell/projectcontroller.cpp:567
+#: shell/projectcontroller.cpp:571
#, kde-format
msgctxt "@info:tooltip"
msgid "Open or import project"
msgstr ""
#. +> trunk5 stable5
-#: shell/projectcontroller.cpp:568
+#: shell/projectcontroller.cpp:572
#, kde-format
msgctxt "@info:whatsthis"
msgid "Open an existing KDevelop 4 project or import an existing Project into KDevelop 4. This entry allows one to select a KDevelop4 project file or an existing directory to open it in KDevelop. When opening an existing directory that does not yet have a KDevelop4 project file, the file will be created."
msgstr ""
#. +> trunk5 stable5
-#: shell/projectcontroller.cpp:579
+#: shell/projectcontroller.cpp:583
#, kde-format
msgctxt "@action"
msgid "Fetch Project..."
msgstr ""
#. +> trunk5 stable5
-#: shell/projectcontroller.cpp:581
+#: shell/projectcontroller.cpp:585
#, kde-format
msgctxt "@info:tooltip"
msgid "Fetch project"
msgstr ""
#. +> trunk5 stable5
-#: shell/projectcontroller.cpp:582
+#: shell/projectcontroller.cpp:586
#, kde-format
msgctxt "@info:whatsthis"
msgid "Guides the user through the project fetch and then imports it into KDevelop 4."
msgid "The current launch configuration does not support the '%1' mode."
msgstr ""
#. +> trunk5 stable5
-#: shell/runcontroller.cpp:441
+#: shell/runcontroller.cpp:440
#, kde-format
msgid "Configure Launches..."
msgstr ""
#. +> trunk5 stable5
-#: shell/runcontroller.cpp:444
+#: shell/runcontroller.cpp:443
#, kde-format
msgid "Open Launch Configuration Dialog"
msgstr ""
#. +> trunk5 stable5
-#: shell/runcontroller.cpp:445
+#: shell/runcontroller.cpp:444
#, kde-format
msgctxt "@info:tooltip"
msgid "Open Launch Configuration Dialog"
msgstr ""
#. +> trunk5 stable5
-#: shell/runcontroller.cpp:446
+#: shell/runcontroller.cpp:445
#, kde-format
msgctxt "@info:whatsthis"
msgid "Opens a dialog to setup new launch configurations, or to change the existing ones."
msgstr ""
#. +> trunk5 stable5
-#: shell/runcontroller.cpp:449
+#: shell/runcontroller.cpp:448
#, kde-format
msgid "Execute Launch"
msgstr ""
#. +> trunk5 stable5
-#: shell/runcontroller.cpp:450
+#: shell/runcontroller.cpp:449
#, kde-format
msgctxt "Short text for 'Execute launch' used in the toolbar"
msgid "Execute"
msgstr ""
#. +> trunk5 stable5
-#: shell/runcontroller.cpp:452
+#: shell/runcontroller.cpp:451
#, kde-format
msgctxt "@info:tooltip"
msgid "Execute current launch"
msgstr ""
#. +> trunk5 stable5
-#: shell/runcontroller.cpp:453
+#: shell/runcontroller.cpp:452
#, kde-format
msgid "Execute current launch"
msgstr ""
#. +> trunk5 stable5
-#: shell/runcontroller.cpp:454
+#: shell/runcontroller.cpp:453
#, kde-format
msgctxt "@info:whatsthis"
msgid "Executes the target or the program specified in currently active launch configuration."
msgstr ""
#. +> trunk5 stable5
-#: shell/runcontroller.cpp:460
+#: shell/runcontroller.cpp:459
#, kde-format
msgctxt "Short text for 'Debug launch' used in the toolbar"
msgid "Debug"
msgstr ""
#. +> trunk5 stable5
-#: shell/runcontroller.cpp:461
+#: shell/runcontroller.cpp:460
#, kde-format
msgctxt "@info:tooltip"
msgid "Debug current launch"
msgstr ""
#. +> trunk5 stable5
-#: shell/runcontroller.cpp:463
+#: shell/runcontroller.cpp:462
#, kde-format
msgctxt "@info:whatsthis"
msgid "Executes the target or the program specified in currently active launch configuration inside a Debugger."
msgstr ""
#. i18n("Profile Launch"), this);
#. profileAction->setToolTip(i18nc("@info:tooltip", "Profile current launch"));
#. profileAction->setStatusTip(i18n("Profile current launch"));
#. profileAction->setWhatsThis(i18nc("@info:whatsthis", "Executes the target or the program specified in currently active launch configuration inside a Profiler."));
"<p>When a project contains more files than this number, the project will be\n"
"parsed in simplified mode, increasing the efficiency by gathering less information. Global code navigation and quickopen capabilities will be reduced.</p>"
msgid "Diffie-Hellman key exchange is not supported by your installation of the Qt Cryptographic Architecture (QCA). You likely need to install an additional provider plugin. Diffie-Hellman key exchange support is usually provided by the qca-ossl plugin."
msgstr ""
#. +> trunk5 stable5
#: src/cipher.cpp:494
#, kde-format
msgid "Blowfish in cipher-block chaining (CBC) mode is not supported by your installation of the Qt Cryptographic Architecture (QCA). You likely need to install an additional provider plugin for QCA. Blowfish support is usually provided by the qca-ossl plugin."
msgstr ""
#. +> trunk5 stable5
#: src/cipher.cpp:506
#, kde-format
msgid "Blowfish in electronic codebook (ECB) mode is not supported by your installation of the Qt Cryptographic Architecture (QCA). You likely need to install an additional provider plugin for QCA. Blowfish support is usually provided by the qca-ossl plugin."
msgctxt "Fallback content for the \"Find:\" field of an auto-replace rule that gets set when the user leaves the field empty and e.g. switches to another rule in the list. It's identical to the default content of the field after adding a new auto-replace rule."
msgid "New"
msgstr ""
#. +> trunk5 stable5
#: src/config/autoreplace_config.cpp:299
#, kde-format
msgctxt "Default content of the \"Find:\" field of a newly-added auto-replace rule."
msgid "Do not expand variables when sending text to the server. A variable starts with '%'; for example, %B will expand to the characters needed to make a text bold."
msgid "Keep channel mode string as a combination of characters instead of translating them into human readable words. E.g. '*** Channel modes: no messages from outside' will become '*** Channel modes: n'"
msgid "By enabling this option, color codes added to IRC messages will be displayed in your chat window as colored text. You can add color codes to your messages, by selecting Insert -> IRC Color"
"ECB or Electronic Codebook mode is supported by many encryption clients like FiSH and Mircryption however it is generally considered to be insecure.\n"
"\n"
"CBC or Cipher Block Chaining mode is not supported by FiSH but is supported by Mircryption. If you are going to use key exchange it is best to first find out if your peer has a client that can use CBC otherwise you will be able to see what they are saying, but they will not be able to read what you are saying."
msgid "This highlight will only be searched for in chat windows listed here by name, or in all chat windows if the field is left empty. Multiple names have to be separated by commas."
msgid "If you select this, the colors you chose in the Highlights preferences page will override the colors for \"Current nick used\" and \"Highlight\"."
"When the nickname watcher is turned on, you will be notified when the nicknames appearing in the <b>Watched Networks/Nicknames</b> list come online or go offline.</p>"
"\n"
"<p>You can also open the <b>Watched Nicks</b> window to see the status of all the watched nicknames.</p>"
"This is your list of nicknames. A nickname is the name that other users will know you by. You may use any name you desire. The first character must be a letter.\n"
"\n"
"Since nicknames must be unique across an entire IRC network, your desired name may be rejected by the server because someone else is already using that nickname. Enter alternate nicknames for yourself. If your first choice is rejected by the server, Konversation will try the alternate nicknames."
msgid "Enter your real name here. IRC is not intended to keep you hidden from your friends or enemies. Keep this in mind if you are tempted to behave maliciously. A fake \"real name\" can be a good way to mask your gender from all the nerds out there, but the PC you use can always be traced so you will never be truly anonymous."
msgid "If you check this box, whenever you perform an <b>/away</b> command, a horizontal line will appear in the channel, marking the point where you went away. Other IRC users do not see this horizontal line."
msgid "The text you enter here is used as the away message when no message is entered as an argument to the <b>/away</b> or <b>/aaway</b> commands, and also when Global Away is toggled from the menu or via the keyboard shortcut."
msgid "Enter a nickname that indicates you are away. Whenever you perform an <b>/away msg</b> command in any channel joined with this Identity, Konversation will automatically change your nickname to the Away nickname. Other users will be able to tell you are away from your computer. Whenever you perform an <b>/away</b> command in any channel in which you are away, Konversation will automatically change your nickname back to the original. If you do not wish to automatically change your nickname when going away, leave blank."
msgid "If you check this box, Konversation will automatically set all connections using this Identity away when the screensaver starts or after a period of user inactivity configured below."
msgid "If you check this box, Konversation will automatically cancel away for all connections using this Identity when the screensaver stops or new user activity is detected."
msgid "If you check this box, Konversation will automatically run the away command in all channel tabs using this Identity. <b>%s</b> in the away command is replaced with the away message. When you return, it will run the return command. <b>%t</b> in the return command is replaced with the length of time you were away."
msgid "This setting affects how characters you type are encoded for sending to the server. It also affects how messages are displayed. When you first open Konversation, it automatically retrieves this setting from the operating system. If you seem to be having trouble seeing other user's messages correctly, try changing this setting."
msgid "When you connect, many servers query your computer for an IDENT response. If you computer is not running an IDENT server, this response is sent by Konversation. No spaces are allowed."
"<p>Every channel on IRC has a topic associated with it. This is simply a message that everybody can see.</p>"
"<p>If you are an operator, or the channel mode <em>'T'</em> has not been set, then you can change the topic by clicking the Edit Channel Properties button to the left of the topic. You can also view the history of topics there.</p>"
"</qt>"
msgstr ""
#. +> trunk5 stable5
#: src/irc/channel.cpp:185
#, kde-format
msgid "Maximum users allowed in channel"
msgstr ""
#. +> trunk5 stable5
#: src/irc/channel.cpp:186
#, kde-format
msgid ""
"<qt>"
"<p>This is the channel user limit - the maximum number of users that can be in the channel at a time. If you are an operator, you can set this. The channel mode <b>T</b>opic (button to left) will automatically be set if set this.</p>"
"<p>This shows your current nick, and any alternatives you have set up. If you select or type in a different nickname, then a request will be sent to the IRC server to change your nick. If the server allows it, the new nickname will be selected. If you type in a new nickname, you need to press 'Enter' at the end.</p>"
"<p>You can edit the alternative nicknames from the <em>Identities</em> option in the <em>Settings</em> menu.</p>"
msgid "The filtered list of channels is displayed here. Notice that if you do not use regular expressions, Konversation lists any channel whose name contains the filter string you entered. The channel name does not have to start with the string you entered.\\n\\nSelect a channel you want to join by clicking on it. Right click on the channel to get a list of all web addresses mentioned in the channel's topic."
"<p>These are all the nicknames on your Nickname Watch list, listed under the server network they are connected to.</p>"
"<p>The <b>Additional Information</b> column shows the information known for each nickname.</p>"
"<p>The channels the nickname has joined are listed underneath each nickname.</p>"
"<p>Nicknames appearing under <b>Offline</b> are not connected to any of the servers in the network.</p>"
"<p>Right-click with the mouse on a nickname to perform additional functions.</p>"
msgstr ""
#. +> trunk5 stable5
#: src/irc/nicksonline.cpp:230
#, kde-format
msgid " online via %1"
msgstr ""
#. +> trunk5 stable5
#: src/irc/nicksonline.cpp:235
#, kde-format
msgid " since %1"
msgstr ""
#. +> trunk5 stable5
#: src/irc/nicksonline.cpp:326
#, kde-format
msgid " Voice"
msgstr ""
#. +> trunk5 stable5
#: src/irc/nicksonline.cpp:327
#, kde-format
msgid " HalfOp"
msgstr ""
#. +> trunk5 stable5
#: src/irc/nicksonline.cpp:328
#, kde-format
msgid " Operator"
msgstr ""
#. +> trunk5 stable5
#: src/irc/nicksonline.cpp:329
#, kde-format
msgid " Owner"
msgstr ""
#. +> trunk5 stable5
#: src/irc/nicksonline.cpp:330
#, kde-format
msgid " Admin"
msgstr ""
#. +> trunk5 stable5
#: src/irc/outputfilter.cpp:220
#, kde-format
msgid "The message you are sending includes characters that do not exist in your current encoding. If you choose to continue anyway those characters will be replaced by a '?'."
msgstr ""
#. +> trunk5 stable5
#: src/irc/outputfilter.cpp:224
#, kde-format
msgid "Encoding Conflict Warning"
msgstr ""
#. +> trunk5 stable5
#: src/irc/outputfilter.cpp:329
#, kde-format
msgid "Raw"
msgstr ""
#. +> trunk5 stable5
#: src/irc/outputfilter.cpp:386
#, kde-format
msgid "Usage: %1JOIN <channel> [password]"
msgstr ""
#. +> trunk5 stable5
#: src/irc/outputfilter.cpp:425
#, kde-format
msgid "Usage: %1KICK <nick> [reason]"
msgstr ""
#. +> trunk5 stable5
#: src/irc/outputfilter.cpp:439
#, kde-format
msgid "%1KICK only works from within channels."
msgstr ""
#. +> trunk5 stable5
#: src/irc/outputfilter.cpp:459
#, kde-format
msgid "%1PART and %1LEAVE without parameters only work from within a channel or a query."
msgstr ""
#. +> trunk5 stable5
#: src/irc/outputfilter.cpp:484
#, kde-format
msgid "%1PART without channel name only works from within a channel."
msgstr ""
#. +> trunk5 stable5
#: src/irc/outputfilter.cpp:508
#, kde-format
msgid "%1TOPIC without parameters only works from within a channel."
msgstr ""
#. +> trunk5 stable5
#: src/irc/outputfilter.cpp:545
#, kde-format
msgid "%1TOPIC without channel name only works from within a channel."
msgstr ""
#. +> trunk5 stable5
#: src/irc/outputfilter.cpp:601
#, kde-format
msgid "%1NAMES with no target may disconnect you from the server. Specify '*' if you really want this."
msgstr ""
#. +> trunk5 stable5
#: src/irc/outputfilter.cpp:624
#, kde-format
msgid "Usage: %1close [window] closes the named channel or query tab, or the current tab if none specified."
msgstr ""
#. +> trunk5 stable5
#: src/irc/outputfilter.cpp:660
#, kde-format
msgid "Usage: %1NOTICE <recipient> <message>"
msgstr ""
#. +> trunk5 stable5
#: src/irc/outputfilter.cpp:667
#, kde-format
msgctxt "%1 is the message, %2 the recipient nickname"
msgid "Sending notice \"%1\" to %2."
msgstr ""
#. +> trunk5 stable5
#: src/irc/outputfilter.cpp:679
#, kde-format
msgid "%1ME only works from a channel, query or DCC chat tab."
msgid "Usage: %1setkey <nick|channel> <key> sets the encryption key for nick or channel. %1setkey <key> when in a channel or query tab sets the key for it. The key field recognizes \"cbc:\" and \"ecb:\" prefixes to set the block cipher mode of operation to either Cipher-Block Chaining or Electronic Codebook. The mode it defaults to when no prefix is given can be changed in the configuration dialog under Behavior -> Connection -> Encryption -> Default Encryption Type, with the default for that setting being Electronic Codebook (ECB)."
msgid "Setting an encryption key requires Konversation to have been built with support for the Qt Cryptographic Architecture (QCA) library. Contact your distributor about a Konversation package with QCA support, or rebuild Konversation with QCA present."
msgstr ""
#. +> trunk5 stable5
#: src/irc/outputfilter.cpp:1725
#, kde-format
msgid "Usage: %1keyx <nick|channel> triggers DH1080 key exchange with the target."
msgstr ""
#. +> trunk5 stable5
#: src/irc/outputfilter.cpp:1728
#, kde-format
msgid "Unable to request a key exchange from %1."
msgstr ""
#. +> trunk5 stable5
#: src/irc/outputfilter.cpp:1732
#, kde-format
msgid "Beginning DH1080 key exchange with %1."
msgstr ""
#. +> trunk5 stable5
#: src/irc/outputfilter.cpp:1751
#, kde-format
msgid "Usage: %1delkey <nick> or <channel> deletes the encryption key for nick or channel"
"<p>Some details of the person you are talking to in this query is shown in this bar. The full name and hostmask is shown.</p>"
"<p>See the <i>Konversation Handbook</i> for an explanation of what the hostmask is.</p>"
"</qt>"
msgstr ""
#. +> trunk5 stable5
#: src/irc/query.cpp:421
#, kde-format
msgid "Do you want to close your query with %1?"
msgstr ""
#. +> trunk5 stable5
#: src/irc/query.cpp:422
#, kde-format
msgid "Close Query"
msgstr ""
#. +> trunk5 stable5
#: src/irc/query.cpp:464
#, kde-format
msgctxt "%1 = nick, %2 = hostmask"
msgid "%1 (%2) has left this server."
msgstr ""
#. +> trunk5 stable5
#: src/irc/query.cpp:472
#, kde-format
msgctxt "%1 = nick, %2 = hostmask, %3 = reason"
msgid "%1 (%2) has left this server (%3)."
msgstr ""
#. +> trunk5 stable5
#: src/irc/server.cpp:275
#, kde-format
msgctxt "The command mentioned is executed in a shell prior to connecting."
msgid "Running pre-connect shell command..."
msgstr ""
#. +> trunk5 stable5
#: src/irc/server.cpp:418
#, kde-format
msgid "Pre-shell command executed successfully!"
msgstr ""
#. +> trunk5 stable5
#: src/irc/server.cpp:421 src/irc/server.cpp:433
#, kde-format
msgctxt "An error message from KDE or Qt is appended."
msgid "There was a problem while executing the command: "
msgstr ""
#. +> trunk5 stable5
#: src/irc/server.cpp:422 src/irc/server.cpp:434
#, kde-format
msgid "Warning"
msgstr ""
#. +> trunk5 stable5
#: src/irc/server.cpp:481
#, kde-format
msgid "Looking for server %1 (port %2)..."
msgstr ""
#. +> trunk5 stable5
#: src/irc/server.cpp:688
#, kde-format
msgid "Server found, connecting..."
msgstr ""
#. +> trunk5 stable5
#: src/irc/server.cpp:723
#, kde-format
msgid "Negotiating capabilities with server..."
msgstr ""
#. +> trunk5
#: src/irc/server.cpp:763
#, kde-format
msgid "Server does not support %1 as SASL authentication mechanism, skipping SASL authentication."
msgstr ""
#. +> trunk5 stable5
#: src/irc/server.cpp:785
#, kde-format
msgid "Requesting capabilities: %1"
msgstr ""
#. +> trunk5 stable5
#: src/irc/server.cpp:800
#, kde-format
msgid "Closing capabilities negotiation."
msgstr ""
#. +> trunk5 stable5
#: src/irc/server.cpp:808
#, kde-format
msgid "Capabilities negotiation failed: Appears not supported by server."
msgstr ""
#. +> trunk5 stable5
#: src/irc/server.cpp:818
#, kde-format
msgid "SASL capability acknowledged by server, attempting SASL %1 authentication..."
msgstr ""
#. +> trunk5 stable5
#: src/irc/server.cpp:831
#, kde-format
msgid "SASL capability denied or not supported by server."
msgstr ""
#. +> trunk5 stable5
#: src/irc/server.cpp:919 src/irc/server.cpp:1028
#, kde-format
msgid "SSL Connection Error"
msgstr ""
#. +> trunk5 stable5
#: src/irc/server.cpp:920
#, kde-format
msgid "Connection to server %1 (port %2) lost while waiting for user response to an SSL error. Will automatically reconnect if error is ignored."
msgstr ""
#. +> trunk5 stable5
#: src/irc/server.cpp:940
#, kde-format
msgid "Connection to server %1 (port %2) lost: %3."
msgstr ""
#. +> trunk5 stable5
#: src/irc/server.cpp:989
#, kde-format
msgid "The SSL certificate for the server %1 (port %2) failed the authenticity check."
msgstr ""
#. +> trunk5 stable5
#: src/irc/server.cpp:993
#, kde-format
msgid "SSL Connection Warning"
msgstr ""
#. +> trunk5 stable5
#: src/irc/server.cpp:1023
#, kde-format
msgid "Could not connect to %1 (port %2) using SSL encryption. Either the server does not support SSL (did you use the correct port?) or you rejected the certificate. %3"
msgstr ""
#. +> trunk5 stable5
#: src/irc/server.cpp:1131
#, kde-format
msgid "Delayed connect aborted."
msgstr ""
#. +> trunk5 stable5
#: src/irc/server.cpp:1161
#, kde-format
msgid "Disconnected from %1 (port %2)."
msgstr ""
#. +> trunk5 stable5
#: src/irc/server.cpp:1328
#, kde-format
msgid ""
"No nicknames from the \"%1\" identity were accepted by the connection \"%2\".\n"
"Please enter a new one or press Cancel to disconnect:"
msgstr ""
#. +> trunk5 stable5
#: src/irc/server.cpp:1329
#, kde-format
msgid "Nickname error"
msgstr ""
#. +> trunk5 stable5
#: src/irc/server.cpp:2171
#, kde-format
msgid "Select File(s) to Send to %1"
msgstr ""
#. +> trunk5 stable5
#: src/irc/server.cpp:2344
#, kde-format
msgctxt "%1=nickname"
msgid "Received invalid DCC SEND request from %1."
msgid "Check if you want to use the Secure Socket Layer (SSL) protocol to communicate with the server. This protects the privacy of your communications between your computer and the IRC server. The server must support SSL protocol for this to work. In most cases, if the server does not support SSL, the connection will fail."
msgid "Choose an existing Identity or click the Edit button to add a new Identity or edit an existing one. The Identity will identify you and determine your nickname when you connect to the network."
msgid "<qt>Optional. This command will be sent to the server after connecting. Example: <b>/msg NickServ IDENTIFY <i>konvirocks</i></b>. This example is for the freenode network, which requires users to register their nickname with a password and login when connecting. <i>konvirocks</i> is the password for the nickname given in Identity. You may enter more than one command by separating them with semicolons.</qt>"
msgid "This is a list of IRC Servers in the network. When connecting to the network, Konversation will attempt to connect to the top server first. If this fails, it will attempt the second server. If this fails, it will attempt the third, and so on. At least one server must be specified. Click a server to highlight it."
msgid "Optional. This is a list of the channels that will be automatically joined once Konversation has connected to a server. You may leave this blank if you wish to not automatically join any channels."
msgid "This shows the list of configured IRC networks. An IRC network is a collection of cooperating servers. You need only connect to one of the servers in the network to be connected to the entire IRC network. Once connected, Konversation will automatically join the channels shown. When Konversation is started for the first time, the Freenode network and the <i>#kde</i> channel are already entered for you."
msgid "Insert a horizontal line into the current tab that only you can see"
msgstr ""
#. +> trunk5 stable5
#: src/mainwindow.cpp:493 src/mainwindow.cpp:826
#, kde-format
msgid "Special &Character..."
msgstr ""
#. +> trunk5 stable5
#: src/mainwindow.cpp:497
#, kde-format
msgid "Insert any character into your current IRC message"
msgstr ""
#. +> trunk5 stable5
#: src/mainwindow.cpp:508
#, kde-format
msgid "Focus Input Box"
msgstr ""
#. +> trunk5 stable5
#: src/mainwindow.cpp:515
#, kde-format
msgid "Close &All Open Queries"
msgstr ""
#. +> trunk5 stable5
#: src/mainwindow.cpp:524
#, kde-format
msgid "Show Nicklist"
msgstr ""
#. +> trunk5 stable5
#: src/mainwindow.cpp:530
#, kde-format
msgid "Show/Hide Konversation"
msgstr ""
#. +> trunk5 stable5
#: src/mainwindow.cpp:538
#, kde-format
msgid "Enable On Screen Display"
msgstr ""
#. +> trunk5 stable5
#: src/mainwindow.cpp:545
#, kde-format
msgid "Bookmarks"
msgstr ""
#. +> trunk5 stable5
#: src/mainwindow.cpp:590
#, kde-format
msgid "<qt>You have active DCC file transfers. Are you sure you want to quit <b>Konversation</b>?</qt>"
msgstr ""
#. +> trunk5 stable5
#: src/mainwindow.cpp:591 src/mainwindow.cpp:601
#, kde-format
msgid "Confirm Quit"
msgstr ""
#. +> trunk5 stable5
#: src/mainwindow.cpp:600
#, kde-format
msgid "<qt>Are you sure you want to quit <b>Konversation</b>?</qt>"
msgstr ""
#. +> trunk5 stable5
#: src/mainwindow.cpp:647
#, kde-format
msgid "<p>Closing the main window will keep Konversation running in the system tray. Use <b>Quit</b> from the <b>Konversation</b> menu to quit the application.</p>"
msgstr ""
#. +> trunk5 stable5
#: src/mainwindow.cpp:649
#, kde-format
msgid "Docking in System Tray"
msgstr ""
#. +> trunk5 stable5
#: src/mainwindow.cpp:768
#, kde-format
msgid "<qt>This will hide the menu bar completely. You can show it again by typing %1.</qt>"
msgstr ""
#. +> trunk5 stable5
#: src/mainwindow.cpp:769
#, kde-format
msgid "Hide menu bar"
msgstr ""
#. +> trunk5 stable5
#: src/mainwindow.cpp:809
#, kde-format
msgid "Toggle Notifications"
msgstr ""
#. +> trunk5 stable5
#: src/mainwindow.cpp:810
#, kde-format
msgid "Toggle Away Globally"
msgstr ""
#. +> trunk5 stable5
#: src/mainwindow.cpp:811
#, kde-format
msgid "Insert &IRC Color..."
msgstr ""
#. +> trunk5 stable5
#: src/mainwindow.cpp:812
#, kde-format
msgid "Insert Special &Character..."
msgstr ""
#. +> trunk5 stable5
#: src/mainwindow.cpp:813
#, kde-format
msgid "Insert &Marker Line"
msgstr ""
#. +> trunk5 stable5
#: src/mainwindow.cpp:815
#, kde-format
msgid "&Channel List"
msgstr ""
#. +> trunk5 stable5
#: src/mainwindow.cpp:824
#, kde-format
msgid "Set &Away Globally"
msgstr ""
#. +> trunk5 stable5
#: src/mainwindow.cpp:836
#, kde-format
msgid "Server List"
msgstr ""
#. +> trunk5 stable5
#: src/notificationhandler.cpp:54
#, kde-format
msgctxt "Notification title; see Event/message in konversation.notifyrc"
msgid "New message from %1 in %2"
msgstr ""
#. +> trunk5 stable5
#: src/notificationhandler.cpp:104
#, kde-format
msgctxt "Notification title; see Event/nick in konversation.notifyrc"
"<p>This shows the number of users in the channel, and the number of those that are operators (ops).</p>"
"<p>A channel operator is a user that has special privileges, such as the ability to kick and ban users, change the channel modes, make other users operators</p>"
msgid "All communication with the server is encrypted. This makes it harder for someone to listen in on your communications."
msgstr ""
#. +> trunk5 stable5
#: src/statusbar.cpp:65
#, kde-format
msgid "<qt>The status bar shows various messages, including any problems connecting to the server. On the far right the current delay to the server is shown. The delay is the time it takes for messages from you to reach the server, and from the server back to you.</qt>"
"<p>These control the <em>mode</em> of the channel. Only an operator can change these.</p>"
"<p>The <b>T</b>opic mode means that only the channel operator can change the topic for the channel.</p>"
"</qt>"
msgstr ""
#. +> trunk5 stable5
#: src/viewer/channeloptionsdialog.cpp:618
#, kde-format
msgid ""
"<qt>"
"<p>These control the <em>mode</em> of the channel. Only an operator can change these.</p>"
"<p><b>N</b>o messages from outside means users who are not in the channel cannot send messages for everybody in the channel to see. Almost all channels have this set to prevent nuisance messages.</p>"
"</qt>"
msgstr ""
#. +> trunk5 stable5
#: src/viewer/channeloptionsdialog.cpp:620
#, kde-format
msgid ""
"<qt>"
"<p>These control the <em>mode</em> of the channel. Only an operator can change these.</p>"
"<p>A <b>S</b>ecret channel will not show up in the channel list, nor will any user be able to see that you are in the channel with the <em>WHOIS</em> command or anything similar. Only the people that are in the same channel will know that you are in this channel, if this mode is set.</p>"
"</qt>"
msgstr ""
#. +> trunk5 stable5
#: src/viewer/channeloptionsdialog.cpp:622
#, kde-format
msgid ""
"<qt>"
"<p>These control the <em>mode</em> of the channel. Only an operator can change these.</p>"
"<p>An <b>I</b>nvite only channel means that people can only join the channel if they are invited. To invite someone, a channel operator needs to issue the command <em>/invite nick</em> from within the channel.</p>"
"</qt>"
msgstr ""
#. +> trunk5 stable5
#: src/viewer/channeloptionsdialog.cpp:624
#, kde-format
msgid ""
"<qt>"
"<p>These control the <em>mode</em> of the channel. Only an operator can change these.</p>"
"<p>A <b>P</b>rivate channel is shown in a listing of all channels, but the topic is not shown. A user's <em>WHOIS</em> may or may not show them as being in a private channel depending on the IRC server.</p>"
"</qt>"
msgstr ""
#. +> trunk5 stable5
#: src/viewer/channeloptionsdialog.cpp:626
#, kde-format
msgid ""
"<qt>"
"<p>These control the <em>mode</em> of the channel. Only an operator can change these.</p>"
"<p>A <b>M</b>oderated channel is one where only operators, half-operators and those with voice can talk.</p>"
"</qt>"
msgstr ""
#. +> trunk5 stable5
#: src/viewer/channeloptionsdialog.cpp:628
#, kde-format
msgid ""
"<qt>"
"<p>These control the <em>mode</em> of the channel. Only an operator can change these.</p>"
"<p>A protected channel requires users to enter a password in order to join.</p>"
"</qt>"
msgstr ""
#. +> trunk5 stable5
#: src/viewer/channeloptionsdialog.cpp:630
#, kde-format
msgid ""
"<qt>"
"<p>These control the <em>mode</em> of the channel. Only an operator can change these.</p>"
"<p>A channel that has a user <b>L</b>imit means that only that many users can be in the channel at any one time. Some channels have a bot that sits in the channel and changes this automatically depending on how busy the channel is.</p>"
"<qt>Here you choose what color you want you the text in the next message you send to be. If you choose a color and click Ok, the chosen color is added to the Input Line. Any text written after this will be in the chosen color, until you change the color again.<br>"
"\n"
"<b>Note: Not all users turn on the option to see this.</b></qt>"
"<qt>Here you choose what color you want you background for the text in the next message you send to be.\n"
"If you choose a color and click Ok, the chosen color is added to the Input Line.\n"
"Any text written after this will have the chosen color, until you change the color again.<br>"
"\n"
"Choosing the default \"<i>None</i>\" will not change the background color of your message, so your readers will view your message with their normal background text color.<br>"
"\n"
"<b>Note: Not all clients support this, and not all users turn on the option to see this.</b></qt>"
msgid "Do you want to stop ignoring the selected users?"
msgstr ""
#. +> trunk5 stable5
#: src/viewer/irccontextmenus.cpp:796
#, kde-format
msgid "Query author"
msgstr ""
#. +> trunk5 stable5
#: src/viewer/ircinput.cpp:58
#, kde-format
msgid ""
"<qt>"
"<p>The input line is where you type messages to be sent the channel, query, or server. A message sent to a channel is seen by everyone on the channel, whereas a message in a query is sent only to the person in the query with you.</p>"
"<p>To automatically complete the nickname you began typing, press Tab. If you have not begun typing, the last successfully completed nickname will be used.</p>"
"<p>You can also send special commands:</p>"
"<table>"
"<tr>"
"<th>/me <i>action</i></th>"
"<td>shows up as an action in the channel or query. For example: <em>/me sings a song</em> will show up in the channel as 'Nick sings a song'.</td>"
"</tr>"
"<tr>"
"<th>/whois <i>nickname</i></th>"
"<td>shows information about this person, including what channels they are in.</td>"
"</tr>"
"</table>"
"<p>For more commands, see the Konversation Handbook.</p>"
"<p>A message cannot contain multiple lines.</p>"
"</qt>"
msgstr ""
#. +> trunk5 stable5
#: src/viewer/ircinput.cpp:482
#, kde-format
msgid "1 byte"
msgid_plural "%1 bytes"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: src/viewer/ircinput.cpp:483
#, kde-format
msgid "1 line"
msgid_plural "%1 lines"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: src/viewer/ircinput.cpp:489
#, kde-format
msgctxt "%1 is, for instance, '200 bytes'. %2 is, for instance, '7 lines'. Both are localised (see the two previous messages)."
msgid "<qt>You are attempting to paste a large portion of text (%1 or %2) into the chat. This can cause connection resets or flood kills. Do you really want to continue?</qt>"
msgid "Use this box to set the maximum size of the log file. This setting does not take effect until you restart Konversation. Each log file may have a separate setting."
msgstr ""
#. +> trunk5 stable5
#: src/viewer/logfilereader.cpp:58
#, kde-format
msgid " KB"
msgstr ""
#. +> trunk5 stable5
#: src/viewer/logfilereader.cpp:65
#, kde-format
msgid "The messages in the log file are displayed here. The oldest messages are at the top and the most recent are at the bottom."
msgstr ""
#. +> trunk5 stable5
#: src/viewer/logfilereader.cpp:144
#, kde-format
msgid "Do you really want to permanently discard all log information of this file?"
msgstr ""
#. +> trunk5 stable5
#: src/viewer/logfilereader.cpp:158
#, kde-format
msgid "Note: By saving the logfile you will save all data in the file, not only the part you can see in this viewer."
msgid "Text past the server limit of %1 bytes is shown in color."
msgstr ""
#. +> trunk5 stable5
#: src/viewer/topichistoryview.cpp:52
#, kde-format
msgctxt "%1 is a timestamp, %2 is the author's name"
msgid "On %1 by %2"
msgstr ""
#. +> trunk5 stable5
#: src/viewer/topichistoryview.cpp:228
#, kde-format
msgid ""
"This is a list of all topics that have been set for this channel while its tab was open.\n"
"\n"
"If the same topic is set multiple times consecutively by someone, only the final occurrence is shown.\n"
"\n"
"When you select a topic in the list, the edit field below it will receive its text. Once you start modifying the contents of the field, however, the list will switch from the regular entry selection mode to allowing you to perform text selection on the entries in case you may wish to incorporate some of their text into the new topic. To return to entry selection mode and a synchronized edit field, undo back to the original text or close and reopen the dialog."
msgstr ""
#. +> trunk5 stable5
#: src/viewer/trayicon.cpp:24
#, kde-format
msgid "Konversation - IRC Client"
msgstr ""
#. +> trunk5 stable5
#: src/viewer/viewcontainer.cpp:878
#, kde-format
msgid "Find Text..."
msgstr ""
#. +> trunk5 stable5
#: src/viewer/viewcontainer.cpp:880
#, kde-format
msgid "Search for text in the current tab"
msgstr ""
#. +> trunk5 stable5
#: src/viewer/viewcontainer.cpp:898
#, kde-format
msgid "Channel &List for %1"
msgstr ""
#. +> trunk5 stable5
#: src/viewer/viewcontainer.cpp:918
#, kde-format
msgid "&Open Logfile for %1"
msgstr ""
#. +> trunk5 stable5
#: src/viewer/viewcontainer.cpp:929
#, kde-format
msgid "&Channel Settings for %1..."
msgstr ""
#. +> trunk5 stable5
#: src/viewer/viewcontainer.cpp:2089
#, kde-format
msgid "Rename Tab"
msgstr ""
#. +> trunk5 stable5
#: src/viewer/viewcontainer.cpp:2090
#, kde-format
msgid "Enter new tab name:"
msgstr ""
#. +> trunk5 stable5
#: src/viewer/viewcontainer.cpp:2162
#, kde-format
msgctxt "Default encoding"
msgid "Default ( %1 )"
msgstr ""
#. +> trunk5 stable5
#: src/viewer/viewcontainer.cpp:2203
#, kde-format
msgid "&Rename Tab..."
msgstr ""
#. +> trunk5 stable5
#: src/viewer/viewcontainer.cpp:2353
#, kde-format
msgid "You can only search in text fields."
msgstr ""
#. +> trunk5 stable5
#: src/viewer/viewcontainer.cpp:2354
#, kde-format
msgid "Find Text Information"
msgstr ""
#. +> trunk5 stable5
#: src/viewer/viewcontainer.cpp:2945
#, kde-format
msgid "To know which server to display the channel list for, the list can only be opened from a query, channel or status window."
msgstr ""
#. +> trunk5 stable5
#: src/viewer/viewcontainer.cpp:2975
#, kde-format
msgid "Using this function may result in a lot of network traffic. If your connection is not fast enough, it is possible that your client will be disconnected by the server."
"Selecting \"Yes\" will create the payee, \"No\" will skip creation of a payee record and remove the payee information from this transaction. Selecting \"Cancel\" aborts the import operation.\n"
"\n"
"If you select \"No\" here and mark the \"Do not ask again\" checkbox, the payee information for all following transactions referencing \"%1\" will be removed."
msgid "KMyMoney cannot determine which of your accounts to use. You can create a new account by pressing the <b>Create</b> button or select another one manually from the selection box below."
msgid "No account information has been found in the selected statement file. Please select an account using the selection box in the dialog or create a new account by pressing the <b>Create</b> button."
"Please make sure you have a disk inserted and that the drive is ready. Then choose the mount point from either the Choose button or by entering the path in the available box.\n"
"\n"
"Click OK to perform the backup. If your system does not use an automounter, make sure you mark the checkbox below to \"mount this directory before backing up.\""
msgid "At least one transaction/schedule still references the category <b>%1</b>. However, at least one category with the same currency must exist so that the transactions/schedules can be reassigned."
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/dialogs/kcategoryreassigndlg.cpp:106
#, kde-format
msgid "This dialog does not allow new categories to be created. Please pick a category from the list."
msgid "The transactions, schedules and budgets associated with the selected category need to be re-assigned to a different category before the selected category can be deleted. Please select a category from the list below."
msgid "<qt>You have entered a scheduled transaction date of <b>%1</b>. Because the scheduled transaction was last paid on <b>%2</b>, KMyMoney will automatically adjust the scheduled transaction date to the next date unless the last payment date is reset. Do you want to reset the last payment date?</qt>"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/dialogs/keditscheduledlg.cpp:542
#, kde-format
msgid "Reset Last Payment Date"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/dialogs/keditscheduledlg.cpp:552
#: kmymoney/dialogs/keditscheduledlg.cpp:570
#: kmymoney/dialogs/keditscheduledlg.cpp:581
#, kde-format
msgid "Unable to modify scheduled transaction '%1'"
"<p>Please check that all the details in the following dialog are correct and press OK.</p>"
"<p>Editable data can be changed and can either be applied to just this occurrence or for all subsequent occurrences for this schedule. (You will be asked what you intend after pressing OK in the following dialog)</p>"
msgid "Failed to retrieve an exchange rate for %1 from %2. It will be skipped this time."
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/dialogs/kequitypriceupdatedlg.cpp:519
#: kmymoney/dialogs/kequitypriceupdatedlg.cpp:525
#: kmymoney/dialogs/kequitypriceupdatedlg.cpp:545
#, kde-format
msgid "Price Update Failed"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/dialogs/kequitypriceupdatedlg.cpp:525
#, kde-format
msgid "Failed to retrieve a quote for %1 from %2. Press <b>No</b> to remove the online price source from this security permanently, <b>Yes</b> to continue updating this security during future price updates or <b>Cancel</b> to stop the current update operation."
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/dialogs/kequitypriceupdatedlg.cpp:545
#, kde-format
msgid "Cannot update security <b>%1</b>: %2"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/dialogs/kequitypriceupdatedlg.cpp:636
#, kde-format
msgid ""
"For <b>%1</b> on <b>%2</b> price <b>%3</b> already exists.<br>"
"Do you want to replace it with <b>%4</b>?"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/dialogs/kequitypriceupdatedlg.cpp:641
#, kde-format
msgid "Price Already Exists"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/dialogs/kequitypriceupdatedlg.cpp:684
#: kmymoney/dialogs/kequitypriceupdatedlg.cpp:760
#, kde-format
msgid "Price for %1 updated (id %2)"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/dialogs/kequitypriceupdatedlg.cpp:702
#: kmymoney/dialogs/kequitypriceupdatedlg.cpp:780
#, kde-format
msgid "Received a price for %1 (id %2), but this symbol is not on the list. Aborting entire update."
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/dialogs/kequitypriceupdatedlg.cpp:764
#, kde-format
msgid "Received an invalid price for %1, unable to update."
msgid "A category named <b>%1</b> already exists. You cannot create a second category with the same name."
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/dialogs/knewaccountdlg.cpp:702
#, kde-format
msgid "You have selected to suppress the display of unused categories in the KMyMoney configuration dialog. The category you just created will therefore only be shown if it is used. Otherwise, it will be hidden in the accounts/categories view."
msgid "To be able to merge previous selected payees, please select a payee from the list below or create a new one."
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/dialogs/kpayeereassigndlg.cpp:46
#, kde-format
msgid "The transactions associated with the selected payees need to be re-assigned to a different payee before the selected payees can be deleted. Please select a payee from the list below."
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/dialogs/kpayeereassigndlg.cpp:122
#, kde-format
msgid "This dialog does not allow new payees to be created. Please pick a payee from the list."
"<p align=\"justify\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">KMyMoney supports multiple storage types. The availability of storage types depends on the presence of plugins and their activation in the application settings.</p>"
msgid "The transactions associated with the selected tags need to be re-assigned to a different tag before the selected tags can be deleted. Please select a tag from the list below."
msgid "This option hides all categories in the categories view that are not used in at least a single transaction. They are still shown in the category selection lists."
msgid "<i>Enter regular expressions which can be used to parse the data returned from the URL entered above. The symbol, price, and date must be found in the quote data to be usable. You may also try the KMyMoney user's mailinglist at <a href=\"mailto:kmymoney@kde.org\">kmymoney@kde.org</a> to find what settings work for other users in your country.</i>"
msgid "Enter the URL from which stock quotes will be fetched. <b>%1</b> will be replaced with the symbol for the security being quoted. For currency conversions, <b>%2</b> will be replaced with the currency to be quoted and <b>%1</b> with the currency the quote is based on."
"<p>For easier processing of the data returned by the online source, KMyMoney usually strips unused parts before it is parsed with the regular expressions. If matching of the fields relies on those items, then use this option to turn stripping off.</p>"
"\n"
"\n"
"<p>The following items are usually removed by stripping:\n"
"\n"
"<ul>\n"
"<li>HTML tags such as <b><tag></b></li>"
"\n"
"<li>& encoded characters such as <b>&nbsp;</b></li>"
msgid "Using the ledger lens shows the details for the transaction that has focus in the ledger. Usually, when using the transaction form, only a one line summary is displayed for each transaction as the details are shown in the form."
msgstr ""
#. i18n: ectx: label, entry (LedgerLens), group (General Options)
msgid "If a planned transaction is overdue, today's date is used by default as the posting date. With this option, the originally planned date is used instead."
msgid "Use the <i>left</i> and <i>right</i> buttons to add and remove sort options. Use the <i>up</i> and <i>down</i> buttons to modify the sort order. Double-Click a selected entry to toggle the sort order between <i>ascending</i> and <i>descending</i>."
msgid "After entering the reconciliation data automatically detect the transactions that match that data (in some cases it might be not possible to do that)."
"Collect all transactions for the given payee. Treat all transactions that refer to the same category and have an amount with +/- X % as identical. If more than one transaction is found, a list of them is presented to the user.\n"
msgid "Two transactions are usually treated identical for autofill, if they refer the same accounts. They are treated as different transactions though, when their amount varies by more than the percentage given here."
msgid "If this option is checked the memos from the previous transaction will be used otherwise the memos will not be considered when the transaction is autofilled."
msgid "Whenever a new payee is detected during import of a statement, the user will be asked to assign a default category for this user when this option is selected."
msgid "This transaction has more than two splits and is originally based on a different currency (%1). Using this account to modify the transaction may result in rounding errors. Do you want to continue?"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/dialogs/transactioneditor.cpp:456
#, kde-format
msgid "At least one of the selected transactions has more than two splits and is originally based on a different currency (%1). Using this account to modify the transactions may result in rounding errors. Do you want to continue?"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/dialogs/transactioneditor.cpp:508
#, kde-format
msgid "<center>Processing schedule for %1.</center>"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/dialogs/transactioneditor.cpp:511
#, kde-format
msgid ""
"Check number <b>%1</b> has already been used in account <b>%2</b>."
"<center>Do you want to replace it with the next available number?</center>"
msgstr ""
#. +> stable
#: kmymoney/dialogs/transactioneditor.cpp:287
#, kde-format
msgid ""
"<center>Check number <b>%1</b> has already been used in account <b>%2</b>.</center>"
"<center>Do you want to replace it with the next available number?</center>"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/dialogs/transactioneditor.cpp:512
#, kde-format
msgid "Duplicate number"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/dialogs/transactioneditor.cpp:646
#, kde-format
msgid "Storing transactions"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/dialogs/transactioneditor.cpp:700
#, kde-format
msgid "&Enter"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/dialogs/transactioneditor.cpp:703
#, kde-format
msgid "Use this to enter the transaction into the ledger."
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/dialogs/transactioneditor.cpp:704
#, kde-format
msgid "&Schedule"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/dialogs/transactioneditor.cpp:706
#, kde-format
msgid "Accepts the entered data and stores it as schedule"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/dialogs/transactioneditor.cpp:707
#, kde-format
msgid "Use this to schedule the transaction for later entry into the ledger."
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/dialogs/transactioneditor.cpp:709
#, kde-format
msgid ""
"The transaction you are about to enter has a post date in the future.<br/>"
"<br/>"
"Do you want to enter it in the ledger or add it to the schedules?"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/dialogs/transactioneditor.cpp:709
#, kde-format
msgctxt "Dialog caption for 'Enter or schedule' dialog"
msgid "Enter or schedule?"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/dialogs/transactioneditor.cpp:793
#, kde-format
msgid "The balance of account <b>%1</b> dropped below the warning balance of %2."
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/dialogs/transactioneditor.cpp:799
#, kde-format
msgid "The balance of account <b>%1</b> dropped below the minimum balance of %2."
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/dialogs/transactioneditor.cpp:805
#, kde-format
msgid "The balance of account <b>%1</b> dropped below the maximum credit warning limit of %2."
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/dialogs/transactioneditor.cpp:811
#, kde-format
msgid "The balance of account <b>%1</b> dropped below the maximum credit limit of %2."
msgid "Unable to setup online parameters for account '%1'"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/kmymoney.cpp:2628
#, kde-format
msgid "<p><b>%1</b> cannot be moved to institution <b>%2</b>. Reason: %3</p>"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/kmymoney.cpp:2641
#, kde-format
msgid "<p><b>%1</b> cannot be moved to <b>%2</b>. Reason: %3</p>"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/kmymoney.cpp:2730
#, kde-format
msgid "Untitled"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/kmymoney.cpp:2795
#, kde-format
msgid "Running consistency check..."
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/kmymoney.cpp:2802
#, kde-format
msgid "Consistency check failed: %1"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/kmymoney.cpp:2812
#, kde-format
msgid "The consistency check has found no issues in your data. Details are presented below."
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/kmymoney.cpp:2814
#, kde-format
msgid "The consistency check has found some issues in your data. Details are presented below. Those issues that could not be corrected automatically need to be solved by the user."
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/kmymoney.cpp:2817
#, kde-format
msgid "Consistency check result"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/kmymoney.cpp:2914
#, kde-format
msgid "Checking for overdue scheduled transactions..."
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/kmymoney.cpp:3104
#, kde-format
msgid "You must first select a KMyMoney file before you can import a statement."
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/kmymoney.cpp:3109
#, kde-format
msgid "Importing a statement via Web Connect"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/kmymoney.cpp:3118
#, kde-format
msgid "Unable to import %1 using %2 plugin. The plugin returned the following error: %3"
msgid "Couldn't find suitable plugin to save your storage."
msgstr ""
#. +> trunk5 stable5
#: kmymoney/kmymoney.cpp:3453
#, kde-format
msgid "Saving file as...."
msgstr ""
#. +> stable
#: kmymoney/kmymoney.cpp:1781
#, kde-format
msgid "Saving file with a new filename..."
msgstr ""
#. +> stable
#: kmymoney/kmymoney.cpp:1926
#, kde-format
msgid "Saving file to database..."
msgstr ""
#. +> trunk5 stable5
#: kmymoney/kmymoney.cpp:3469
#, kde-format
msgid "Couldn't find any plugin for saving storage."
msgstr ""
#. +> stable
#: kmymoney/kmymoney.cpp:3488
#, kde-format
msgid "Adjusting budgets..."
msgstr ""
#. +> stable
#: kmymoney/kmymoney.cpp:3530
#, kde-format
msgid "Do you really want to delete category <b>%1</b>?"
msgstr ""
#. +> stable
#: kmymoney/kmymoney.cpp:3537
#, kde-format
msgid "Unable to delete category <b>%1</b>. Cause: %2"
msgstr ""
#. +> stable
#: kmymoney/kmymoney.cpp:3548
#, kde-format
msgid "Do you want to delete category <b>%1</b> with all its sub-categories or only the category itself? If you only delete the category itself, all its sub-categories will be made sub-categories of <b>%2</b>."
msgstr ""
#. +> stable
#: kmymoney/kmymoney.cpp:3602
#, kde-format
msgid "Unable to delete a sub-category of category <b>%1</b>. Reason: %2"
msgstr ""
#. +> stable
#: kmymoney/kmymoney.cpp:3612
#, kde-format
msgid "<p>Do you really want to delete account <b>%1</b>?</p>"
msgstr ""
#. +> stable
#: kmymoney/kmymoney.cpp:4254
#, kde-format
msgid "You have closed this account. It remains in the system because you have transactions which still refer to it, but it is not shown in the views. You can make it visible again by going to the View menu and selecting <b>Show all accounts</b> or by deselecting the <b>Do not show closed accounts</b> setting."
msgstr ""
#. +> stable
#: kmymoney/kmymoney.cpp:4401
#, kde-format
msgid "You have entered a scheduled transaction date of <b>%1</b>. Because the scheduled transaction was last paid on <b>%2</b>, KMyMoney will automatically adjust the scheduled transaction date to the next date unless the last payment date is reset. Do you want to reset the last payment date?"
msgstr ""
#. +> stable
#: kmymoney/kmymoney.cpp:4517
#, kde-format
msgid "Do you really want to skip the <b>%1</b> transaction scheduled for <b>%2</b>?"
msgstr ""
#. +> stable
#: kmymoney/kmymoney.cpp:4686
#, kde-format
msgid "Do you want to add <b>%1</b> as payer/receiver?"
msgid "The monetary decimal symbol is not correctly set in the KDE System Settings module Country/Region & Language. Please set it to a reasonable value and start KMyMoney again."
msgstr ""
#. +> stable
#: kmymoney/main.cpp:127
#, kde-format
msgid "Invalid settings"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/main.cpp:130
#, kde-format
msgid "turn on program traces"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/main.cpp:134
#, kde-format
msgid "dump the names of all defined QAction objects to stdout and quit"
msgstr ""
#. +> stable
#: kmymoney/main.cpp:109
#, kde-format
msgid "dump the names of all defined KAction objects to stdout and quit"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/main.cpp:140
#, kde-format
msgid "file to open"
msgstr ""
#. +> stable
#: kmymoney/main.cpp:188
#, kde-format
msgid "%1 in file %2 line %3"
msgstr ""
#. +> stable
#: kmymoney/main.cpp:231
#, kde-format
msgid "Another instance of KMyMoney is already running. Do you want to quit?"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/main.cpp:254
#, kde-format
msgid "Uncaught error. Please report the details to the developers"
"From this dialog you are able to export transactions to a comma separated file, (known as a CSV file, because of the extension). However, you are able to specify an alternative separator below. Please enter the path to the CSV file or select it by clicking on the Browse button.\n"
"\n"
"You can choose the file's path, and the account. Choose Account to export all the transactions between the specified dates, or just choose to export Categories."
"The date entry \"%1\" read from the file cannot be interpreted through the current date format setting of \"%2.\"\n"
"\n"
"Pressing 'Continue' will assign today's date to the transaction. Pressing 'Cancel'' will abort the import operation. You can then restart the import and select a different date format."
msgstr ""
#. +> stable
#: kmymoney/plugins/csvimport/csvdialog.cpp:1514
#, kde-format
msgid "<center>There must an amount or debit and credit fields, plus date and payee fields.</center>"
msgstr ""
#. +> stable
#: kmymoney/plugins/csvimport/csvdialog.cpp:1516
#, kde-format
msgid "<center>As you had skipped Setup, the wizard will now return you to the setups.</center>"
msgid "You selected to extract the payee from the memo field but did not supply a regular expression for payee and memo extraction. The option will not be activated."
msgid "The plugin usually downloads the account balance and transactions. In some circumstances, the download of transaction data is not supported for certain accounts. The following option allows to turn off the request for transaction data."
"<p>Some institutions take multiple purpose fields of a transaction and treat it as a single one. In this case the line break characters inserted after each purpose field are distracting and are removed when this option is enabled.</p>"
msgid "Please enter the username and password you use to log into this bank for online banking. Please note that many banks require a separate signup, and assign a separate PIN or password just for online banking from home."
"<p>In case the server is located in a different timezone than your local time, then the post date of imported transactions is off by a day.</p>"
"<p>This setting can be used to adjust the timestamps of the transactions during import to reflect your local time. It does not affect previously imported transactions. </p>"
"<p>If you are located west of your bank's server than enter a negative time, in case you are located east of it enter a positve time.</p>"
"<p>If you are not sure, leave this setting at 0:00.</p>"
msgid "If a QIF file contains date entries with years represented with two digits then either an apostrophe or a slash may be used to delimit the year in the dates for certain centuries. This enables 1905 to be distinguished from 2005. Specify here which range of years will have year delimited by an apostrophe (eg. for Quicken this is usually 1900-1949)."
"From this dialog you are able to export transactions to a quicken compatible file, (known as a QIF file, because of the extension). Please enter the path to the QIF file or select it by clicking on the Browse button.\n"
"\n"
"You can choose the file's path, the account and the format of the QIF file (profile). Choose Account to export all the transactions between the specified dates or just categories. You can also limit the transactions that are exported by start and ending date. Once you have pressed the Export button a message box will appear when the export has completed detailing how many transactions, categories and payees were exported."
"<p>From this dialog you are able to import transactions from a Quicken<b>™</b> compatible file, (known as a QIF file, because of the extension).</p>"
"\n"
"<p>Please enter the path to the QIF file or select it by clicking on the Browse button. Once you have the file's path press the Import button and KMyMoney will import all the transactions, categories and payees it finds.</p>"
msgid "Select <b>Bank statement</b> turns on automatic category matching which is turned off in case of <b>Other application</b>. Use the latter if you import files from other Personal Finance Management software."
msgid "The %1 account currently has an opening balance of %2. This QIF file reports an opening balance of %3. Would you like to overwrite the current balance with the one from the QIF file?"
msgid "KMyMoney has imported a second opening balance transaction into account <b>%1</b> which differs from the one found already on file. Please correct this manually once the import is done."
"The date entry \"%1\" read from the file cannot be interpreted through the current date profile setting of \"%2\".\n"
"\n"
"Pressing \"Continue\" will assign todays date to the transaction. Pressing \"Cancel\" will abort the import operation. You can then restart the import and select a different QIF profile or create a new one."
msgid "Autogenerated by QIF importer from type Mutual account entry"
msgstr ""
#. +> stable
#: kmymoney/converter/mymoneyqifreader.cpp:2093
#: kmymoney/converter/mymoneyqifreader.cpp:2224
#, kde-format
msgid "account"
msgstr ""
#. +> stable
#: kmymoney/converter/mymoneyqifreader.cpp:2094
#, kde-format
msgid "al"
msgstr ""
#. +> stable
#: kmymoney/converter/mymoneyqifreader.cpp:2101
#, kde-format
msgid "category"
msgstr ""
#. +> stable
#: kmymoney/converter/mymoneyqifreader.cpp:2102
#, kde-format
msgid "ei"
msgstr ""
#. +> stable
#: kmymoney/converter/mymoneyqifreader.cpp:2119
#, kde-format
msgid "Account \"%1\" disappeared: %2"
msgstr ""
#. +> stable
#: kmymoney/converter/mymoneyqifreader.cpp:2141
#, kde-format
msgctxt "The 'type of object' 'x' does not exist"
msgid "The %1 '%2' does not exist. Do you want to create it?"
msgstr ""
#. +> stable
#: kmymoney/converter/mymoneyqifreader.cpp:2151
#, kde-format
msgctxt "To select account"
msgid "Select %1"
msgstr ""
#. +> stable
#: kmymoney/converter/mymoneyqifreader.cpp:2153
#, kde-format
msgid "The %1 <b>%2</b> currently exists. Do you want to import transactions to this account?"
msgstr ""
#. +> stable
#: kmymoney/converter/mymoneyqifreader.cpp:2157
#, kde-format
msgid "The %1 <b>%2</b> currently does not exist. You can create a new %3 by pressing the <b>Create</b> button or select another %4 manually from the selection box."
msgid "You have entered budget values using a different base which would result in a monthly budget of <b>%1</b>. Should this value be used to fill the monthly budget?"
msgid "You have entered budget values using a different base which would result in a yearly budget of <b>%1</b>. Should this value be used to fill the monthly budget?"
msgid "You have entered budget values using a different base which would result in an individual monthly budget of <b>%1</b>. Should this value be used to fill the monthly budgets?"
msgid "A budget with the name '%1' already exists. It is not advisable to have multiple budgets with the same identification name. Are you sure you would like to rename the budget?"
msgid "<p>Select this option to cause the report to be shown as a chart when you first open the report. Otherwise, it will come up as a text report.</p>"
msgid "Select what <b>online</b> account you want to map to the <b>application</b> account..."
msgstr ""
#. +> trunk5 stable5
#: kmymoney/plugins/weboob/weboob.cpp:80
#, kde-format
msgid "Weboob"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/plugins/weboob/weboob.cpp:123
#, kde-format
msgid "Weboob configuration"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/plugins/weboob/weboob.cpp:170
#, kde-format
msgid "Retrieving transactions..."
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/plugins/xml/kcm_xmlstorage.cpp:175
#: kmymoney/plugins/xml/ksettingsgpg.cpp:218
#, kde-format
msgid ""
"<p>You have turned on the GPG encryption support. This means, that new files will be stored encrypted.</p>"
"<p>Existing files will not be encrypted automatically. To achieve encryption of existing files, please use the <b>File/Save as...</b> feature and store the file under a different name.<br/>"
"Once confident with the result, feel free to delete the old file and rename the encrypted one to the old name.</p>"
msgid "Enter the id of the key you want to use for data encryption. This can either be an e-mail address or the hexadecimal key id. In case of the key id, do not forget the leading 0x."
msgid "GPG does not seem to be installed on your system. Please make sure that GPG can be found using the standard search path. This time, encryption is disabled."
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/plugins/xml/xmlstorage.cpp:427
#, kde-format
msgid "GPG not found"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/plugins/xml/xmlstorage.cpp:433
#, kde-format
msgid ""
"<p>You have selected to encrypt your data also with the KMyMoney recover key, but the key with id</p>"
"<p>"
"<center><b>%1</b></center>"
"</p>"
"<p>has not been found in your keyring at this time. Please make sure to import this key into your keyring. You can find it on the <a href=\"https://kmymoney.org/\">KMyMoney web-site</a>. This time your data will not be encrypted with the KMyMoney recover key.</p>"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/plugins/xml/xmlstorage.cpp:433
#: kmymoney/plugins/xml/xmlstorage.cpp:440
#, kde-format
msgid "GPG Key not found"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/plugins/xml/xmlstorage.cpp:440
#, kde-format
msgid ""
"<p>You have specified to encrypt your data for the user-id</p>"
"<p>"
"<center><b>%1</b>.</center>"
"</p>"
"<p>Unfortunately, a valid key for this user-id was not found in your keyring. Please make sure to import a valid key for this user-id. This time, encryption is disabled.</p>"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/plugins/xml/xmlstorage.cpp:447
#, kde-format
msgid "<p>You have configured to save your data in encrypted form using GPG. Make sure you understand that you might lose all your data if you encrypt it, but cannot decrypt it later on. If unsure, answer <b>No</b>.</p>"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/plugins/xml/xmlstorage.cpp:448
#, kde-format
msgid "Store GPG encrypted"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/plugins/xml/xmlstorage.cpp:567
#, kde-format
msgid "You have configured KMyMoney to use GPG to protect your data and to encrypt your data also with the KMyMoney recover key. This key is about to expire in %1 day. Please update the key from a keyserver using your GPG frontend (e.g. KGPG)."
msgid_plural "You have configured KMyMoney to use GPG to protect your data and to encrypt your data also with the KMyMoney recover key. This key is about to expire in %1 days. Please update the key from a keyserver using your GPG frontend (e.g. KGPG)."
"This page allows you to set the parameters for encrypted file storage of your <b>KMyMoney</b> data based on <b>GPG</b>."
"<p>\n"
"Access to the settings is disabled if <b>GPG</b> could not be detected on your system. In this case, please make sure that <b>GPG</b> is working properly for the current user."
"<p>\n"
"The <i>additional recovery encryption</i> is only accessible, if the necessary key for <b>kmymoney-recover@users.sourceforge.net</b> with id 0x8AFDDC8E is found in your keyring."
msgid "Enter the id of the key you want to use for data encryption. This can either be an e-mail address or the hexadecimal key id. In case of the key id do not forget the leading 0x."
"You can specify to encrypt the data also with the KMyMoney recover key. Only the core KMyMoney developers are in posession of the respective private key required to read back such encrypted data."
"<p>\n"
"\n"
"This mechanism is provided for the case that you have lost your key and cannot access your data anymore. With this option activated, the KMyMoney developers can decrypt the data and supply you with it in a readable form. Please be prepared, that you have to answer a few detailed questions about the contents of your data before we will send it out."
#. i18n: ectx: label, entry (sortSearchView), group (List Options)
#. +> trunk5 stable5 stable
#: kmymoney/settings/kmymoney.kcfg:327
#, kde-format
msgid "Sort order of register in search dialog"
msgstr ""
#. i18n: ectx: label, entry (defaultReconciliationState), group (List Options)
#. +> trunk5 stable5 stable
#: kmymoney/settings/kmymoney.kcfg:340
#, kde-format
msgid "Default reconciliation state for transactions entered during reconciliation"
msgstr ""
#. i18n: ectx: label, entry (matchInterval), group (Import options)
#. +> trunk5 stable5 stable
#: kmymoney/settings/kmymoney.kcfg:346
#, kde-format
msgid "Number of days (plus/minus) to search for matching transactions"
msgstr ""
#. i18n: ectx: label, entry (askForPayeeCategory), group (Import options)
#. +> trunk5 stable5 stable
#: kmymoney/settings/kmymoney.kcfg:350
#, kde-format
msgid "During import, ask for a new payee's default category"
msgstr ""
#. i18n: ectx: label, entry (qifCash), group (QIF Options)
#. +> trunk5 stable5 stable
#: kmymoney/settings/kmymoney.kcfg:356
#, kde-format
msgid "additional names for cash account"
msgstr ""
#. i18n: ectx: label, entry (qifBank), group (QIF Options)
#. +> trunk5 stable5 stable
#: kmymoney/settings/kmymoney.kcfg:360
#, kde-format
msgid "additional names for checking account"
msgstr ""
#. i18n: ectx: label, entry (qifCreditCard), group (QIF Options)
#. +> trunk5 stable5 stable
#: kmymoney/settings/kmymoney.kcfg:364
#, kde-format
msgid "additional names for credit card account"
msgstr ""
#. i18n: ectx: label, entry (qifAsset), group (QIF Options)
#. +> trunk5 stable5 stable
#: kmymoney/settings/kmymoney.kcfg:368
#, kde-format
msgid "additional names for asset account"
msgstr ""
#. i18n: ectx: label, entry (qifOpeningBalance), group (QIF Options)
#. +> trunk5 stable5 stable
#: kmymoney/settings/kmymoney.kcfg:372
#, kde-format
msgid "additional names for opening balance payee"
msgstr ""
#. i18n: ectx: label, entry (qifInvoice), group (QIF Options)
#. +> trunk5 stable5 stable
#: kmymoney/settings/kmymoney.kcfg:376
#, kde-format
msgid "additional names for invoice accounts"
msgstr ""
#. i18n: ectx: label, entry (showAccountsExpanded), group (Account View Settings)
#. +> trunk5 stable5 stable
#: kmymoney/settings/kmymoney.kcfg:382
#, kde-format
msgid "Show accounts view expanded when loaded"
msgstr ""
#. i18n: ectx: label, entry (MaximumLegendItems), group (Chart Settings)
#. +> trunk5 stable5 stable
#: kmymoney/settings/kmymoney.kcfg:388
#, kde-format
msgid "Maximum quantity of legend items to display on charts"
msgstr ""
#. i18n: ectx: label, entry (ChartsPalette), group (Chart Settings)
#. +> trunk5 stable5 stable
#: kmymoney/settings/kmymoney.kcfg:400
#, kde-format
msgid "The palette used to render charts"
msgstr ""
#. i18n: ectx: label, entry (CssFileDefault), group (Chart Settings)
#. +> trunk5 stable5 stable
#: kmymoney/settings/kmymoney.kcfg:406
#, kde-format
msgid "Name of default CSS file"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kaccountsview.cpp:347
#, kde-format
msgid "Unable to delete account '%1'. Cause: %2"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kaccountsview.cpp:361
#, kde-format
msgid "<qt>You have closed this account. It remains in the system because you have transactions which still refer to it, but it is not shown in the views. You can make it visible again by going to the View menu and selecting <b>Show all accounts</b> or by deselecting the <b>Do not show closed accounts</b> setting.</qt>"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kaccountsview.cpp:361
#, kde-format
msgid "Information"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kaccountsview.cpp:414
#, kde-format
msgid "Do you really want to remove the mapping of account <b>%1</b> to an online account? Depending on the details of the online banking method used, this action cannot be reverted."
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kaccountsview.cpp:414
#, kde-format
msgid "Remove mapping to online account"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kaccountsview.cpp:429
#, kde-format
msgid "Unable to unmap account from online account: %1"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kaccountsview.cpp:448
#, kde-format
msgid "You try to map a brokerage account to an online account. This is usually not advisable. In general, the investment account should be mapped to the online account. Please cancel if you intended to map the investment account, continue otherwise"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kaccountsview.cpp:448
#, kde-format
msgid "Mapping brokerage account"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kaccountsview.cpp:466
#, kde-format
msgid "Select online banking plugin"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kaccountsview.cpp:507
#, kde-format
msgid "Unable to map account to online account: %1"
msgid "The balance of the account must be zero before the account can be closed"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kaccountsview_p.h:316
#, kde-format
msgid "All subaccounts must be closed before the account can be closed"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kaccountsview_p.h:319
#, kde-format
msgid "This account is still included in an active schedule"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kaccountsview_p.h:322
#, kde-format
msgid "This account is still mapped to an online account"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kcategoriesview.cpp:255
#, kde-format
msgid "Edit category '%1'"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kcategoriesview.cpp:278
#, kde-format
msgid "Unable to modify category '%1'. Cause: %2"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kcategoriesview.cpp:388
#, kde-format
msgid "Unable to exchange category <b>%1</b> with category <b>%2</b>. Reason: %3"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kcategoriesview.cpp:409
#, kde-format
msgid "<qt>Do you really want to delete category <b>%1</b>?</qt>"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kcategoriesview.cpp:416
#, kde-format
msgid "<qt>Unable to delete category <b>%1</b>. Cause: %2</qt>"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kcategoriesview.cpp:427
#, kde-format
msgid "<qt>Do you want to delete category <b>%1</b> with all its sub-categories or only the category itself? If you only delete the category itself, all its sub-categories will be made sub-categories of <b>%2</b>.</qt>"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kcategoriesview.cpp:431
#, kde-format
msgid "Delete all"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kcategoriesview.cpp:432
#, kde-format
msgid "Just the category"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kcategoriesview.cpp:460
#, kde-format
msgid "<p>Some sub-categories of category <b>%1</b> cannot be deleted, because they are still used. They will be made sub-categories of <b>%2</b>. Proceed?</p>"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kcategoriesview.cpp:480
#, kde-format
msgid "<qt>Unable to delete a sub-category of category <b>%1</b>. Reason: %2</qt>"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kcategoriesview.cpp:493
#, kde-format
msgid "Unable to delete category '%1'. Cause: %2"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kgloballedgerview.cpp:253
#, kde-format
msgid "Reconcile"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kgloballedgerview.cpp:255
#, kde-format
msgid "Reconcile - disabled because you are currently reconciling <b>%1</b>"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kgloballedgerview.cpp:319
#, kde-format
msgid "Duplicate the current selected transactions"
"You are about to finish the reconciliation of this account with a difference between your bank statement and the transactions marked as cleared.\n"
"Are you sure you want to finish the reconciliation?"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kgloballedgerview.cpp:1989
#, kde-format
msgid "Confirm end of reconciliation"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kgloballedgerview_p.h:702
#, kde-format
msgid "Statement Details"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kgloballedgerview_p.h:706
#, kde-format
msgid "Statement Deposit Details"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kgloballedgerview_p.h:707
#, kde-format
msgid "Statement Payment Details"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kgloballedgerview_p.h:824
#: kmymoney/views/kgloballedgerview_p.h:840
#, kde-format
msgid "%1 deposit (%2)"
msgid_plural "%1 deposits (%2)"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kgloballedgerview_p.h:826
#, kde-format
msgid "%1 charge (%2)"
msgid_plural "%1 charges (%2)"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kgloballedgerview_p.h:828
#: kmymoney/views/kgloballedgerview_p.h:836
#, kde-format
msgid "%1 payment (%2)"
msgid_plural "%1 payments (%2)"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kgloballedgerview_p.h:831
#, kde-format
msgctxt "%1 is a string, e.g. 7 deposits; %2 is a string, e.g. 4 payments"
msgid "%1, %2"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kgloballedgerview_p.h:938
#: kmymoney/views/kgloballedgerview_p.h:958
#, kde-format
msgid "Go to '%1'"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kgloballedgerview_p.h:1012
#, kde-format
msgid "Statement: %1"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kgloballedgerview_p.h:1013
#: kmymoney/views/kgloballedgerview_p.h:1029
#, kde-format
msgctxt "Cleared balance"
msgid "Cleared: %1"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kgloballedgerview_p.h:1021
#, kde-format
msgid "Last reconciled: %1"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kgloballedgerview_p.h:1023
#, kde-format
msgid "Never reconciled"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kgloballedgerview_p.h:1139
#, kde-format
msgid "Cannot process transactions in account %1, which is closed."
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kgloballedgerview_p.h:1145
#, kde-format
msgid "Cannot process transaction with focus if it is not selected."
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kgloballedgerview_p.h:1233
#, kde-format
msgid "Unable to delete transaction(s)"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kgloballedgerview_p.h:1262
#, kde-format
msgid "Unable to unmatch the selected transactions"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kgloballedgerview_p.h:1320
#, kde-format
msgid "Unable to match the selected transactions"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kgloballedgerview_p.h:1526
#, kde-format
msgid "Running automatic reconciliation"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/khomeview.cpp:200
#, kde-format
msgid "Before KMyMoney can give you detailed information about your financial status, you need to create at least one account. Until then, KMyMoney shows the welcome page instead."
msgid "Do you want to show <b>%1</b> column on every loaded view?"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kmymoneyview.cpp:357
#, kde-format
msgid "Do you want to hide <b>%1</b> column on every loaded view?"
msgstr ""
#. +> stable
#: kmymoney/views/kmymoneyview.cpp:414
#, kde-format
msgid "Creating transactions can only be performed in the ledger view"
msgstr ""
#. +> stable
#: kmymoney/views/kmymoneyview.cpp:428
#, kde-format
msgid "Modifying transactions can only be performed in the ledger view"
msgstr ""
#. +> stable
#: kmymoney/views/kmymoneyview.cpp:442
#, kde-format
msgid "Duplicating transactions can only be performed in the ledger view"
msgstr ""
#. +> stable
#: kmymoney/views/kmymoneyview.cpp:454
#, kde-format
msgid "Edit the current selected transactions"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kmymoneyview.cpp:461
#, kde-format
msgid "Show home page"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kmymoneyview.cpp:462
#, kde-format
msgid "Show institutions page"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kmymoneyview.cpp:463
#, kde-format
msgid "Show accounts page"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kmymoneyview.cpp:464
#, kde-format
msgid "Show scheduled transactions page"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kmymoneyview.cpp:465
#, kde-format
msgid "Show categories page"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kmymoneyview.cpp:466
#, kde-format
msgid "Show tags page"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kmymoneyview.cpp:467
#, kde-format
msgid "Show payees page"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kmymoneyview.cpp:468
#, kde-format
msgid "Show ledgers page"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kmymoneyview.cpp:469
#, kde-format
msgid "Show investments page"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kmymoneyview.cpp:470
#, kde-format
msgid "Show reports page"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kmymoneyview.cpp:471
#, kde-format
msgid "Show budget page"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kmymoneyview.cpp:472
#, kde-format
msgid "Show forecast page"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kmymoneyview.cpp:473
#, kde-format
msgid "Show outbox page"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kmymoneyview.cpp:651
#, kde-format
msgid "Unable to add schedule: %1"
msgstr ""
#. +> stable
#: kmymoney/views/kmymoneyview.cpp:706
#, kde-format
msgid "<p><b>%1</b> is not a KMyMoney file.</p>"
msgstr ""
#. +> stable
#: kmymoney/views/kmymoneyview.cpp:745
#, kde-format
msgid "GPG is not available for decryption of file <b>%1</b>"
msgstr ""
#. +> stable
#: kmymoney/views/kmymoneyview.cpp:820
#, kde-format
msgid "File <b>%1</b> contains the old binary format used by KMyMoney. Please use an older version of KMyMoney (0.8.x) that still supports this format to convert it to the new XML based format."
msgstr ""
#. +> stable
#: kmymoney/views/kmymoneyview.cpp:822
#, kde-format
msgid "File <b>%1</b> contains an unknown file format."
msgstr ""
#. +> stable
#: kmymoney/views/kmymoneyview.cpp:827
#, kde-format
msgid "Cannot read from file <b>%1</b>."
msgstr ""
#. +> stable
#: kmymoney/views/kmymoneyview.cpp:831
#, kde-format
msgid "Cannot load file <b>%1</b>. Reason: %2"
msgstr ""
#. +> stable
#: kmymoney/views/kmymoneyview.cpp:842
#, kde-format
msgid "The following error was encountered while decrypting file <b>%1</b>: %2"
msgid "GPG does not seem to be installed on your system. Please make sure, that GPG can be found using the standard search path. This time, encryption is disabled."
msgstr ""
#. +> stable
#: kmymoney/views/kmymoneyview.cpp:1139
#, kde-format
msgid ""
"<p>You have selected to encrypt your data also with the KMyMoney recover key, but the key with id</p>"
"<p>"
"<center><b>%1</b></center>"
"</p>"
"<p>has not been found in your keyring at this time. Please make sure to import this key into your keyring. You can find it on the <a href=\"http://kmymoney.org/\">KMyMoney web-site</a>. This time your data will not be encrypted with the KMyMoney recover key.</p>"
msgid "A payee with the name '%1' already exists. It is not advisable to have multiple payees with the same identification name. Are you sure you would like to rename the payee?"
msgid "This list contains the names that will match this payee if a transaction is imported from an external source. Keep in mind, that you can specify regular expressions here."
msgid "At least one transaction/scheduled transaction or loan account is still referenced by a payee. Currently you have all payees selected. However, at least one payee must remain so that the transaction/scheduled transaction or loan account can be reassigned."
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kpayeesview_p.h:620
#, kde-format
msgid "Unable to reassign payee of transaction/split"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kpayeesview_p.h:624
#, kde-format
msgid "Nothing to merge."
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kpayeesview_p.h:682
#, kde-format
msgid "Unable to remove payee(s)"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kscheduledview.cpp:218
#, kde-format
msgid "KMyMoney has detected some overdue scheduled transactions for this account. Do you want to enter those scheduled transactions now?"
msgid "Unable to enter scheduled transaction '%1'"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kscheduledview_p.h:545
#, kde-format
msgid ""
"Are you sure you wish to stop this scheduled transaction from being entered into the register?\n"
"\n"
"KMyMoney will prompt you again next time it starts unless you manually enter it later."
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kscheduledview_p.h:648
#, kde-format
msgid "<qt>Do you really want to skip the <b>%1</b> transaction scheduled for <b>%2</b>?</qt>"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kscheduledview_p.h:658
#, kde-format
msgid "<qt>Unable to skip scheduled transaction <b>%1</b>.</qt>"
msgstr ""
#. +> stable
#: kmymoney/views/ktagsview.cpp:136
#, kde-format
msgctxt "Update tag"
msgid "Update"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/ktagsview.cpp:137
#, kde-format
msgid "A tag with the name '%1' already exists. It is not advisable to have multiple tags with the same identification name. Are you sure you would like to rename the tag?"
msgid "Do you want to save the changes for <b>%1</b>?"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/ktagsview.cpp:634
#, kde-format
msgid "<p>Do you really want to remove the tag <b>%1</b>?</p>"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/ktagsview.cpp:636
#, kde-format
msgid "Do you really want to remove all selected tags?"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/ktagsview.cpp:638
#, kde-format
msgid "Remove Tag"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/ktagsview.cpp:675
#, kde-format
msgid "At least one transaction/scheduled transaction is still referenced by a tag. Currently you have all tags selected. However, at least one tag must remain so that the transaction/scheduled transaction can be reassigned."
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/ktagsview.cpp:740
#, kde-format
msgid "Unable to reassign tag of transaction/split"
msgid "The free, easy to use, personal finance manager by KDE"
msgstr ""
#. +> stable
#: kmymoney/views/kwelcomepage.cpp:69
#, kde-format
msgid "The free, easy to use, personal finance manager for KDE"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kwelcomepage.cpp:85
#, kde-format
msgid "Go to My Financial Summary"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kwelcomepage.cpp:98
#, kde-format
msgid "Start with one of the following activities..."
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kwelcomepage.cpp:104
#, kde-format
msgid "Get started and setup accounts"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kwelcomepage.cpp:107
#, kde-format
msgid "Open an existing data file"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kwelcomepage.cpp:110
#, kde-format
msgid "Learn how to use KMyMoney"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kwelcomepage.cpp:113
#, kde-format
msgid "Visit our website"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kwelcomepage.cpp:116
#, kde-format
msgid "Get help from our community"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kwelcomepage.cpp:119
#, kde-format
msgid "See what's new in this version"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kwelcomepage.cpp:155
#, kde-format
msgid "What's new in this version"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kwelcomepage.cpp:169
#, kde-format
msgid "What's new in KMyMoney %1"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kwelcomepage.cpp:172
#, kde-format
msgid "Return to the Welcome page"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kwelcomepage.cpp:181
#, kde-format
msgid "We are pleased to announce a major step forward for what has been described as \"the BEST personal finance manager for FREE users\"."
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kwelcomepage.cpp:182
#, kde-format
msgid "What's new in this version:"
msgstr ""
#. +> stable
#: kmymoney/views/kwelcomepage.cpp:210
#, kde-format
msgid "A plugin to import data using Weboob was added"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kwelcomepage.cpp:211
#, kde-format
msgid "Let us know what you think. We hope that you enjoy using the application."
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kwelcomepage.cpp:212
#, kde-format
msgid "Please let us know about any abnormal behavior in the program by selecting <a href=\"/action?id=help_report_bug\">\"Report bug...\"</a> from the help menu or by sending an e-mail to the developers mailing list."
msgstr ""
#. +> stable
#: kmymoney/views/kwelcomepage.cpp:212
#, kde-format
msgid "When an account cannot be closed, a tooltip explains the reason"
msgstr ""
#. +> stable
#: kmymoney/views/kwelcomepage.cpp:213
#, kde-format
msgid "Transaction tags were added"
msgstr ""
#. +> stable
#: kmymoney/views/kwelcomepage.cpp:214
#, kde-format
msgid "Proper input methods support was added"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kwelcomepage.cpp:215
#, kde-format
msgid "The KMyMoney Development Team"
msgstr ""
#. +> stable
#: kmymoney/views/kwelcomepage.cpp:216
#, kde-format
msgid "Added a frozen column to improve visualizing forecast details"
msgstr ""
#. +> stable
#: kmymoney/views/kwelcomepage.cpp:217
#, kde-format
msgid "Improved multiple records management actions (payees, transactions)"
msgstr ""
#. +> stable
#: kmymoney/views/kwelcomepage.cpp:218
#, kde-format
msgid "Better performance of the user interface"
msgstr ""
#. +> stable
#: kmymoney/views/kwelcomepage.cpp:219
#, kde-format
msgid "Homepage can show accounts online banking status"
msgstr ""
#. +> stable
#: kmymoney/views/kwelcomepage.cpp:221
#, kde-format
msgid "CSV importer was improved"
msgstr ""
#. +> stable
#: kmymoney/views/kwelcomepage.cpp:223
#, kde-format
msgid "OFX plugin now allows custom application version"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kwelcomepage.cpp:237
#, kde-format
msgid "* General changes"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kwelcomepage.cpp:238
#, kde-format
msgid "- Port to KDE frameworks and Qt5"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kwelcomepage.cpp:240
#, kde-format
msgid "* User Interface changes"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kwelcomepage.cpp:241
#, kde-format
msgid "- Show more tooltips why features are not available"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kwelcomepage.cpp:242
#, kde-format
msgid "- Improved compatibility with dark color schemes"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kwelcomepage.cpp:243
#, kde-format
msgid "- Fast switching of main views via Ctrl + number key"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kwelcomepage.cpp:244
#, kde-format
msgid "- Improved keyboard navigation"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kwelcomepage.cpp:245
#, kde-format
msgid "- View columns are user selectable"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kwelcomepage.cpp:246
#, kde-format
msgid "- Use QWebEngine in favor of KHTML when available"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kwelcomepage.cpp:248
#, kde-format
msgid "* Im-/Exporter"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kwelcomepage.cpp:249
#, kde-format
msgid "- Added support for Weboob"
msgstr ""
#. +> stable
#: kmymoney/views/kwelcomepage.cpp:209
#, kde-format
msgid "Added support for online SEPA transactions"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kwelcomepage.cpp:250
#, kde-format
msgid "- Improved CSV importer"
msgstr ""
#. +> stable
#: kmymoney/views/kwelcomepage.cpp:220
#, kde-format
msgid "Improved the icon theme"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kwelcomepage.cpp:251
#, kde-format
msgid "- Added CSV exporter"
msgstr ""
#. +> stable
#: kmymoney/views/kwelcomepage.cpp:222
#, kde-format
msgid "CSV exporter added"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kwelcomepage.cpp:252
#, kde-format
msgid "- Improved payee matching when importing transactions"
msgstr ""
#. +> stable
#: kmymoney/views/kwelcomepage.cpp:211
#, kde-format
msgid "Improved payee matching when importing transactions"
msgstr ""
#. +> stable
#: kmymoney/views/kwelcomepage.cpp:215
#, kde-format
msgid "Improved the transaction form"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kwelcomepage.cpp:254
#, kde-format
msgid "* Online services"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kwelcomepage.cpp:255
#, kde-format
msgid "- Updated list of application versions for OFX direct import"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kwelcomepage.cpp:256
#, kde-format
msgid "- Get rid of Yahoo as price source"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kwelcomepage.cpp:257
#, kde-format
msgid "- Supporting OFX client uid required by some banks"
msgid "In case you have multiple split entries to the same category and you like to keep them as a single split, press this button. The amount for identical categories will be added and stored in a single split for that category."
"Reconciling your account ensures your records match those of your institution, and that there are no mistakes on either side. You should reconcile your account whenever you receive a statement from your institution.\n"
"\n"
"All relevant information necessary for this process is usually printed on your statement.\n"
"\n"
"On the next page you will verify that the ending balance matches that on your statement. If not, please modify it.\n"
"\n"
"The starting balance is the sum of your cleared and reconciled transactions."
"You have previously postponed the reconciliation of this account. If you have entered charges or interests the last time you started reconciling this account you can modify these in the ledger later on.\n"
"\n"
"It is important, that you continue with the same statement you used when you postponed the reconciliation.\n"
"\n"
"All information you have entered into this wizard will be shown and all transactions that you already cleared are marked with a 'C'."
msgid "This page summarizes the data you have entered. Press <b>Finish</b> to create the account, schedules, etc. or use <b>Back</b> to modify your entries."
msgid "Please make sure to enter the correct conversion for the selected opening date. If you requested an online quote it might be provided for a different date."
msgid "Enter the name of the account under which it is known within KMyMoney. Select the type for the new account. Use the <b>What's this?</b> feature to see more details about the various account types. Enter the date the account was opened and its currency."
"Use the checking account type to manage activities on your checking account e.g. payments, checks and cash card purchases.</p>"
"\n"
"\n"
"<p><b>Savings</b>\n"
"Use the savings account type to manage activities on your savings account.</p>"
"\n"
"\n"
"<p><b>Credit Card</b>\n"
"Use the credit card account type to manage activities on your credit card.</p>"
"\n"
"\n"
"<p><b>Cash</b>\n"
"\n"
"Use the cash account type to manage activities in your wallet.</p>"
"\n"
"\n"
"<p><b>Loan</b>\n"
"Use the loan account type to manage amortization loans (e.g. mortgages, car loan, money you lend, private loans etc.).</p>"
"\n"
"\n"
"<p><b>Investment</b>\n"
"Use the investment account to manage your stock, mutual fund and other investments.</p>"
"\n"
"\n"
"<p><b>Asset</b>\n"
"Use the asset account type to manage assets (e.g. your house, car or art collection).</p>"
"\n"
"\n"
"<p><b>Liability</b>\n"
"Use the liability account type to manage any type of liability except amortization loans. Use it for taxes you owe or money you borrowed from friends. For amortization loans like mortgages you should create a loan account.</p>"
"<p>The opening date would be the date of the last statement. In case you want to keep track of transactions prior to this date, enter the ending balance and statement date of a prior statement and add all following transactions into KMyMoney. KMyMoney will not allow you to enter or modify transactions prior to this date.</p>"
"\n"
"<p><i>Note</i>: If you do not know the exact amount of the opening balance, enter an estimate. You can change this value later before you reconcile this account for the first time.</p>"
"<p>The opening balance is the balance of the account when you start using it with KMyMoney. For new accounts this is usually 0 but for existing accounts this may well differ. Please consult the account statements to figure out this value. The opening balance is to be provided in the currency of the account as selected with the currency button.</p>"
"\n"
"<p><i>Note</i>: If you do not know the exact amount of the opening balance, enter an estimate. You can change this value later before you reconcile this account for the first time.</p>"
msgid "For foreign currencies an initial conversion rate needs to be provided. This should be the price of the foreign currency in the base currency on the opening date of the account."
"Does this investment account have a brokerage account?"
"<p>\n"
"\n"
"<b>Check</b> the mark if this investment account has an associated account for money that is not invested.<br>"
"\n"
"\n"
"<b>Uncheck</b> it if you do not use this account for active stock brokerage. You should also uncheck it if the account is not maintained by a bank or broker."
msgid "For credit card accounts you can create a monthly schedule which will automatically remind you about the payment. Please fill in the details about this payment here."
"<qt>Select which transactions should be recorded.\n"
"\n"
"<b>All payments</b> allows you to enter all payments made for this loan.\n"
"\n"
"The option to <b>start from the beginning of the current year</b> is meant for loans that have already been active for a longer period of time, and for which you do not want to enter all past transactions.\n"
msgid "You have selected to record only payments from the beginning of this year. Since prior transactions will not be recorded, you need to supply the balance of the loan on January 1st of this year."
msgid "Select the frequency with which the interest is compounded. If uncertain, select the same as the payment frequency. Consult your loan contract for details."
"If this account is managed by an institution please select the institution from the list. If the institution does not exist yet, please choose the <b>New Institution</b> button to create it. Otherwise, leave this field empty.\n"
"Enter the account number used by the institution to identify the account."
"You can enter the IBAN (International Bank Account Number) into this field if you know it. Usually, people at your institution can tell you the number or it is printed on your statements.\n"
"\n"
"See also https://en.wikipedia.org/wiki/International_Bank_Account_Number for more information.\n"
"\n"
"KMyMoney keeps this field only for documentation purposes and does not use it otherwise."
"You can enter the IBAN (International Bank Account Number) into this field if you know it. Usually, people at your institution can tell you the number or it is printed on your statements.\n"
"\n"
"See also http://en.wikipedia.org/wiki/International_Bank_Account_Number for more information.\n"
"\n"
"KMyMoney keeps this field only for documentation purposes and does not use it otherwise."
msgid "Now enter the details for your loan. You can leave one of the fields empty and KMyMoney will calculate it when you press the <b>Calculate</b> button. Before you can continue with the next page you also need to press <b>Calculate</b> so that KMyMoney can check the logical correctness of the values you have supplied."
msgid "Enter the amount of the loan in this field. If you want to calculate this field out of the other parameters, please leave it empty. If the field is marked as required (colored background) you have informed KMyMoney about the fact that there were already some payments towards the loan. In this case, please enter the ending balance of your last statement."
msgid "Please enter the term of this loan or enter 0 to calculate it. The term is the time that is required to fully repay the loan. This time might be different from the time your loan contract is signed for."
msgid "Pressing this button calculates a possibly missing parameter for your loan or verifies that the values entered match. If something is not correct you will receive information about it."
msgid "Now enter the information required for the periodic loan payments. If your regular payments contains any additional fees, click on the <b>Additional fees</b> button to enter them."
"If this loan is for an asset, such as a car or a house, you can create the asset account now. An asset account represents the total value of an asset. The money from this loan will be transferred into the asset account you create or select.\n"
"If this loan is a 'consumer loan' (money to use however you want), you can use a checking account instead."
"KMyMoney creates a schedule for this payment and reminds you whenever a payment must be made. Please select the account to/from which payments will be made and the category the interest will be assigned to."
"<p>\n"
"If you selected to record all payments this date has already been supplied. If you selected to record only this years payments, then the <b>First payment due date</b> is the date of the first payment made in this year."
msgid "The category the interest part of the payment will be assigned to. If you borrow money you usually have to pay interest, so this should be an expense category. If you lend the money, you receive the interest. In this case, select an income category here."
msgid "Select the account from which you make your periodical payments or where you receive regular payments in case you lend the money. In most cases, this is a checking account."
msgid "The first step in this process requires to select the type of investment. The following steps collect more details about the investment from you."
msgid "Select an online source and click <b>Finish</b> to store the investment data. If you do not want to use online updates, just leave the data as is."
"KMyMoney has calculated the loan as shown in the overview below. You can accept these values by selecting \"Next\" or change them by choosing \"Back\" to return to the input field for the information you want to change."
"Please enter the term of this loan or leave the field empty to calculate it. The term is the time that is required to fully repay the loan. This time might be different from the time your loan contract is signed for."
msgid "Please enter the date from which on the following changes will be effective. The date entered must be later than the opening date of this account (%1), but must not be in the future. The default will be today."
msgid "Note: Consult the loan contract for details of the first due date. Keep in mind, that the first due date usually differs from the date the contract was signed"
"Is the interest of this loan fixed over a period of time or is it adapted from time to time? If the interest rate changes during the amortization phase of the loan you should choose the option 'variable interest rate'."
msgid "Note: you will not be able to modify this account today, because the opening date \"%1\" is in the future. Please revisit this dialog when the time has come."
msgid "Your previous selection was \"%1\". If you select another option, KMyMoney will dismiss the changes you have just entered. Do you wish to proceed?"
msgid "The loan wizard is unable to calculate two different values for your loan at the same time. Please enter a value for the %1 on this page or backup to the page where the current value to be calculated is defined and fill in a value."
msgid "You selected, that payments have already been made towards this loan. This requires you to enter the loan amount exactly as found on your last statement."
msgid "You have entered mis-matching information. Please backup to the appropriate page and update your figures or leave one value empty to let KMyMoney calculate it for you"
"Welcome to the New Loan Account Wizard which will guide you through the creation of a new loan e.g. for your home, your car or any other loan that you pay or gain interest for.\n"
"\n"
"Please make sure that you have the relevant information handy. You usually get the information out of your contract and the last statement."
"KMyMoney either calculates the new interest rate or the amount for principal and interest. If you know the amount for principal and interest then enter it here.\n"
"\n"
"If KMyMoney should calculate this value for you, then leave the field blank."
"KMyMoney will create a schedule for this payment and reminds you whenever a payment must be made."
"<p>\n"
"If you selected to record all payments this date has already been supplied. If you selected to record only this years payments, then the <b>First payment due date</b> is the date of the first payment made in this year."
"KMyMoney has calculated the loan as shown below. If you want to accept these values use the \"Finish\" button to update your account, otherwise use the \"Back\" button to modify your settings."
"This page summarizes the data you entered. If you need to modify anything, please use the \"Back\" button to go to respective page. Otherwise use the \"Finish\" button to create the account."
msgid "A typical KMyMoney user maintains a checking account with some institution and uses it to receive money or pay bills. If this is not the case, please deselect the checkbox below and continue on the next page."
msgid "Enter the date from when on you plan to keep track of the transactions in that account. This is usually the date of the last statement. If uncertain, leave as is."
msgid "The fields below allow you to enter some information about your checking account. Once this wizard finishes, the account will be created for you within KMyMoney."
msgid "KMyMoney supports multiple currencies. Your reports will be based on a default currency which you can select here. The default for new accounts is also the currency you select here."
"You have started KMyMoney for the first time on this computer. Before this program can help you to manage your finances, it needs to collect some data from you."
"<p>\n"
"\n"
"On the next few pages you will be guided through the steps necessary to setup the program. This will happen only once."
msgid "<p>KMyMoney can encrypt your datafile using GPG Encryption. GPG encryption is one of the most secure methods in the world for protecting data. All of your account numbers and other important financial information will be very secure.</p>"
msgid "If you would like to review or change any preference settings for KMyMoney after finishing this wizard, you can do so by checking this box. If not just click <b>Next</b>."
msgid "You can change the configuration options at any time using the configuration dialog. Just select the <b>Configure KMyMoney...</b> option in the <b>Settings</b> menu."
msgid "Select groups of accounts that correspond to the ways that you will use KMyMoney. Each group you select will cause several accounts and categories to be created. Select the groups that are relevant to you. You can always create additional accounts manually later."
msgid "KMyMoney supports multiple currencies, nevertheless one of them will be used as your base currency. The base currency is used as default for new accounts and reports. Please select the base currency from the following list."
msgctxt "These are the suffix strings of the days in the calendar view; please make sure that you keep all the 30 separators (the '-' character) when translating"
msgid "KMyMoney will store your financial data in a file on the disk. A standard filename within your KDE user environment will be the default. This is just provided for convenience and you can choose any other location here."
msgid "This finishes the setup of your KMyMoney environment. You can now press the Finish button and start using KMyMoney to record your financial transactions."
msgid "Root privileges are required to create a symlink. Do you want to continue?"
msgstr ""
#. +> trunk5
#: core/job.cpp:321
#, kde-format
msgid "Transfer data"
msgstr ""
#. +> trunk5
#: core/job.cpp:322
#, kde-format
msgid "Root privileges are required to complete transferring data. Do you want to continue?"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:43
#, kde-format
msgid "Could not read %1."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:46
#, kde-format
msgid "Could not write to %1."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:49
#, kde-format
msgid "Could not start process %1."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:52
#, kde-format
msgid ""
"Internal Error\n"
"Please send a full bug report at https://bugs.kde.org\n"
"%1"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:55
#, kde-format
msgid "Malformed URL %1."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:58
#, kde-format
msgid "The protocol %1 is not supported."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:61
#, kde-format
msgid "The protocol %1 is only a filter protocol."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:68
#, kde-format
msgid "%1 is a folder, but a file was expected."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:71
#, kde-format
msgid "%1 is a file, but a folder was expected."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:74
#, kde-format
msgid "The file or folder %1 does not exist."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:77
#, kde-format
msgid "A file named %1 already exists."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:80
#, kde-format
msgid "A folder named %1 already exists."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:83
#, kde-format
msgid "No hostname specified."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:83
#, kde-format
msgid "Unknown host %1"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:86
#, kde-format
msgid "Access denied to %1."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:89
#, kde-format
msgid ""
"Access denied.\n"
"Could not write to %1."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:92
#, kde-format
msgid "Could not enter folder %1."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:95
#, kde-format
msgid "The protocol %1 does not implement a folder service."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:98
#, kde-format
msgid "Found a cyclic link in %1."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:104
#, kde-format
msgid "Found a cyclic link while copying %1."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:107
#, kde-format
msgid "Could not create socket for accessing %1."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:110
#, kde-format
msgid "Could not connect to host %1."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:113
#, kde-format
msgid "Connection to host %1 is broken."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:116
#, kde-format
msgid "The protocol %1 is not a filter protocol."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:119
#, kde-format
msgid ""
"Could not mount device.\n"
"The reported error was:\n"
"%1"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:122
#, kde-format
msgid ""
"Could not unmount device.\n"
"The reported error was:\n"
"%1"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:125
#, kde-format
msgid "Could not read file %1."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:128
#, kde-format
msgid "Could not write to file %1."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:131
#, kde-format
msgid "Could not bind %1."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:134
#, kde-format
msgid "Could not listen %1."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:137
#, kde-format
msgid "Could not accept %1."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:143
#, kde-format
msgid "Could not access %1."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:146
#, kde-format
msgid "Could not terminate listing %1."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:149
#, kde-format
msgid "Could not make folder %1."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:152
#, kde-format
msgid "Could not remove folder %1."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:155
#, kde-format
msgid "Could not resume file %1."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:158
#, kde-format
msgid "Could not rename file %1."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:161
#, kde-format
msgid "Could not change permissions for %1."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:164
#, kde-format
msgid "Could not change ownership for %1."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:167
#, kde-format
msgid "Could not delete file %1."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:170
#, kde-format
msgid "The process for the %1 protocol died unexpectedly."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:173
#, kde-format
msgid ""
"Error. Out of memory.\n"
"%1"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:176
#, kde-format
msgid ""
"Unknown proxy host\n"
"%1"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:179
#, kde-format
msgid "Authorization failed, %1 authentication not supported"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:182
#, kde-format
msgid ""
"User canceled action\n"
"%1"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:185
#, kde-format
msgid ""
"Internal error in server\n"
"%1"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:188
#, kde-format
msgid ""
"Timeout on server\n"
"%1"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:191
#, kde-format
msgid ""
"Unknown error\n"
"%1"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:194
#, kde-format
msgid ""
"Unknown interrupt\n"
"%1"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:205
#, kde-format
msgid ""
"Could not delete original file %1.\n"
"Please check permissions."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:208
#, kde-format
msgid ""
"Could not delete partial file %1.\n"
"Please check permissions."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:211
#, kde-format
msgid ""
"Could not rename original file %1.\n"
"Please check permissions."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:214
#, kde-format
msgid ""
"Could not rename partial file %1.\n"
"Please check permissions."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:217
#, kde-format
msgid ""
"Could not create symlink %1.\n"
"Please check permissions."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:223
#, kde-format
msgid "There is not enough space on the disk to write %1."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:226
#, kde-format
msgid ""
"The source and destination are the same file.\n"
"%1"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:232
#, kde-format
msgid "%1 is required by the server, but is not available."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:235
#, kde-format
msgid "Access to restricted port in POST denied."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:238
#, kde-format
msgid "The required content size information was not provided for a POST operation."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:241
#, kde-format
msgid "A file or folder cannot be dropped onto itself"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:244
#, kde-format
msgid "A folder cannot be moved into itself"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:247
#, kde-format
msgid "Communication with the local password server failed"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:250
#, kde-format
msgid "Unable to create io-slave. %1"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:253
#, kde-kuit-format
msgctxt "@info"
msgid "Cannot transfer <filename>%1</filename> because it is too large. The destination filesystem only supports files up to 4GiB"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:256
#, kde-format
msgid ""
"Privilege escalation is not necessary because \n"
"'%1' is owned by the current user.\n"
"Please retry after changing permissions."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:259
#, kde-format
msgid ""
"Unknown error code %1\n"
"%2\n"
"Please send a full bug report at https://bugs.kde.org."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:284
#, kde-format
msgctxt "@info url"
msgid "(unknown)"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:291
#, kde-format
msgctxt "@info %1 error name, %2 description"
msgid ""
"<qt>"
"<p><b>%1</b></p>"
"<p>%2</p>"
"</qt>"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:295
#, kde-format
msgid "<b>Technical reason</b>: "
msgstr ""
#. +> trunk5
#: core/job_error.cpp:297
#, kde-format
msgid "<b>Details of the request</b>:"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:298
#, kde-format
msgid "<li>URL: %1</li>"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:300
#, kde-format
msgid "<li>Protocol: %1</li>"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:302
#, kde-format
msgid "<li>Date and time: %1</li>"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:303
#, kde-format
msgid "<li>Additional information: %1</li>"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:306
#, kde-format
msgid "<b>Possible causes</b>:"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:311
#, kde-format
msgid "<b>Possible solutions</b>:"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:345
#, kde-format
msgctxt "@info protocol"
msgid "(unknown)"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:354
#, kde-format
msgid "Contact your appropriate computer support system, whether the system administrator, or technical support group for further assistance."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:357
#, kde-format
msgid "Contact the administrator of the server for further assistance."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:360
#, kde-format
msgid "Check your access permissions on this resource."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:361
#, kde-format
msgid "Your access permissions may be inadequate to perform the requested operation on this resource."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:363
#, kde-format
msgid "The file may be in use (and thus locked) by another user or application."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:365
#, kde-format
msgid "Check to make sure that no other application or user is using the file or has locked the file."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:367
#, kde-format
msgid "Although unlikely, a hardware error may have occurred."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:369
#, kde-format
msgid "You may have encountered a bug in the program."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:370
#, kde-format
msgid "This is most likely to be caused by a bug in the program. Please consider submitting a full bug report as detailed below."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:372
#, kde-format
msgid "Update your software to the latest version. Your distribution should provide tools to update your software."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:374
#, kde-format
msgid "When all else fails, please consider helping the KDE team or the third party maintainer of this software by submitting a high quality bug report. If the software is provided by a third party, please contact them directly. Otherwise, first look to see if the same bug has been submitted by someone else by searching at the <a href=\"https://bugs.kde.org/\">KDE bug reporting website</a>. If not, take note of the details given above, and include them in your bug report, along with as many other details as you think might help."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:382
#, kde-format
msgid "There may have been a problem with your network connection."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:385
#, kde-format
msgid "There may have been a problem with your network configuration. If you have been accessing the Internet with no problems recently, this is unlikely."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:388
#, kde-format
msgid "There may have been a problem at some point along the network path between the server and this computer."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:390
#, kde-format
msgid "Try again, either now or at a later time."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:391
#, kde-format
msgid "A protocol error or incompatibility may have occurred."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:392
#, kde-format
msgid "Ensure that the resource exists, and try again."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:393
#, kde-format
msgid "The specified resource may not exist."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:394
#, kde-format
msgid "Double-check that you have entered the correct location and try again."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:396
#, kde-format
msgid "Check your network connection status."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:400
#, kde-format
msgid "Cannot Open Resource For Reading"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:401
#, kde-format
msgid "This means that the contents of the requested file or folder <strong>%1</strong> could not be retrieved, as read access could not be obtained."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:404
#, kde-format
msgid "You may not have permissions to read the file or open the folder."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:410
#, kde-format
msgid "Cannot Open Resource For Writing"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:411
#, kde-format
msgid "This means that the file, <strong>%1</strong>, could not be written to as requested, because access with permission to write could not be obtained."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:419
#, kde-format
msgid "Cannot Launch Process required by the %1 Protocol"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:420
#, kde-format
msgid "Unable to Launch Process"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:421
#, kde-format
msgid "The program on your computer which provides access to the <strong>%1</strong> protocol could not be found or started. This is usually due to technical reasons."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:424
#, kde-format
msgid "The program which provides compatibility with this protocol may not have been updated with your last update of KDE. This can cause the program to be incompatible with the current version and thus not start."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:432
#, kde-format
msgid "Internal Error"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:433
#, kde-format
msgid "The program on your computer which provides access to the <strong>%1</strong> protocol has reported an internal error."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:441
#, kde-format
msgid "Improperly Formatted URL"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:442
#, kde-format
msgid ""
"The <strong>U</strong>niform <strong>R</strong>esource <strong>L</strong>ocator (URL) that you entered was not properly formatted. The format of a URL is generally as follows:"
msgid "The protocol <strong>%1</strong> is not supported by the KDE programs currently installed on this computer."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:455
#, kde-format
msgid "The requested protocol may not be supported."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:456
#, kde-format
msgid "The versions of the %1 protocol supported by this computer and the server may be incompatible."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:458
#, kde-format
msgid "You may perform a search on the Internet for a KDE program (called a kioslave or ioslave) which supports this protocol. Places to search include <a href=\"https://kde-apps.org/\">https://kde-apps.org/</a> and <a href=\"http://freshmeat.net/\">http://freshmeat.net/</a>."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:467
#, kde-format
msgid "URL Does Not Refer to a Resource."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:468
#, kde-format
msgid "Protocol is a Filter Protocol"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:469
#, kde-format
msgid "The <strong>U</strong>niform <strong>R</strong>esource <strong>L</strong>ocator (URL) that you entered did not refer to a specific resource."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:472
#, kde-format
msgid "KDE is able to communicate through a protocol within a protocol; the protocol specified is only for use in such situations, however this is not one of these situations. This is a rare event, and is likely to indicate a programming error."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:480
#, kde-format
msgid "Unsupported Action: %1"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:481
#, kde-format
msgid "The requested action is not supported by the KDE program which is implementing the <strong>%1</strong> protocol."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:484
#, kde-format
msgid "This error is very much dependent on the KDE program. The additional information should give you more information than is available to the KDE input/output architecture."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:487
#, kde-format
msgid "Attempt to find another way to accomplish the same outcome."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:492
#, kde-format
msgid "File Expected"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:493
#, kde-format
msgid "The request expected a file, however the folder <strong>%1</strong> was found instead."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:495
#, kde-format
msgid "This may be an error on the server side."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:500
#, kde-format
msgid "Folder Expected"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:501
#, kde-format
msgid "The request expected a folder, however the file <strong>%1</strong> was found instead."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:508
#, kde-format
msgid "File or Folder Does Not Exist"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:509
#, kde-format
msgid "The specified file or folder <strong>%1</strong> does not exist."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:517
#, kde-format
msgid "The requested file could not be created because a file with the same name already exists."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:519
#, kde-format
msgid "Try moving the current file out of the way first, and then try again."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:521
#, kde-format
msgid "Delete the current file and try again."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:522
#, kde-format
msgid "Choose an alternate filename for the new file."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:527
#, kde-format
msgid "The requested folder could not be created because a folder with the same name already exists."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:529
#, kde-format
msgid "Try moving the current folder out of the way first, and then try again."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:531
#, kde-format
msgid "Delete the current folder and try again."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:532
#, kde-format
msgid "Choose an alternate name for the new folder."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:536
#, kde-format
msgid "Unknown Host"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:537
#, kde-format
msgid "An unknown host error indicates that the server with the requested name, <strong>%1</strong>, could not be located on the Internet."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:540
#, kde-format
msgid "The name that you typed, %1, may not exist: it may be incorrectly typed."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:547
#, kde-format
msgid "Access Denied"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:548
#, kde-format
msgid "Access was denied to the specified resource, <strong>%1</strong>."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:550 core/job_error.cpp:776
#, kde-format
msgid "You may have supplied incorrect authentication details or none at all."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:552 core/job_error.cpp:778
#, kde-format
msgid "Your account may not have permission to access the specified resource."
msgid "Retry the request and ensure your authentication details are entered correctly."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:562
#, kde-format
msgid "Write Access Denied"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:563
#, kde-format
msgid "This means that an attempt to write to the file <strong>%1</strong> was rejected."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:570
#, kde-format
msgid "Unable to Enter Folder"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:571
#, kde-format
msgid "This means that an attempt to enter (in other words, to open) the requested folder <strong>%1</strong> was rejected."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:579
#, kde-format
msgid "Folder Listing Unavailable"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:580
#, kde-format
msgid "Protocol %1 is not a Filesystem"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:581
#, kde-format
msgid "This means that a request was made which requires determining the contents of the folder, and the KDE program supporting this protocol is unable to do so."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:589
#, kde-format
msgid "Cyclic Link Detected"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:590
#, kde-format
msgid "UNIX environments are commonly able to link a file or folder to a separate name and/or location. KDE detected a link or series of links that results in an infinite loop - i.e. the file was (perhaps in a roundabout way) linked to itself."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:594 core/job_error.cpp:616
#, kde-format
msgid "Delete one part of the loop in order that it does not cause an infinite loop, and try again."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:603
#, kde-format
msgid "Request Aborted By User"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:604 core/job_error.cpp:919
#, kde-format
msgid "The request was not completed because it was aborted."
msgid "UNIX environments are commonly able to link a file or folder to a separate name and/or location. During the requested copy operation, KDE detected a link or series of links that results in an infinite loop - i.e. the file was (perhaps in a roundabout way) linked to itself."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:621
#, kde-format
msgid "Could Not Create Network Connection"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:622
#, kde-format
msgid "Could Not Create Socket"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:623
#, kde-format
msgid "This is a fairly technical error in which a required device for network communications (a socket) could not be created."
msgid "The network connection may be incorrectly configured, or the network interface may not be enabled."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:631
#, kde-format
msgid "Connection to Server Refused"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:632
#, kde-format
msgid "The server <strong>%1</strong> refused to allow this computer to make a connection."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:634
#, kde-format
msgid "The server, while currently connected to the Internet, may not be configured to allow requests."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:636
#, kde-format
msgid "The server, while currently connected to the Internet, may not be running the requested service (%1)."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:638
#, kde-format
msgid "A network firewall (a device which restricts Internet requests), either protecting your network or the network of the server, may have intervened, preventing this request."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:645
#, kde-format
msgid "Connection to Server Closed Unexpectedly"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:646
#, kde-format
msgid "Although a connection was established to <strong>%1</strong>, the connection was closed at an unexpected point in the communication."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:649
#, kde-format
msgid "A protocol error may have occurred, causing the server to close the connection as a response to the error."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:655
#, kde-format
msgid "URL Resource Invalid"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:656
#, kde-format
msgid "Protocol %1 is not a Filter Protocol"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:657
#, kde-format
msgid "The <strong>U</strong>niform <strong>R</strong>esource <strong>L</strong>ocator (URL) that you entered did not refer to a valid mechanism of accessing the specific resource, <strong>%1%2</strong>."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:662
#, kde-format
msgid "KDE is able to communicate through a protocol within a protocol. This request specified a protocol be used as such, however this protocol is not capable of such an action. This is a rare event, and is likely to indicate a programming error."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:670
#, kde-format
msgid "Unable to Initialize Input/Output Device"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:671
#, kde-format
msgid "Could Not Mount Device"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:672
#, kde-format
msgid "The requested device could not be initialized (\"mounted\"). The reported error was: <strong>%1</strong>"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:675
#, kde-format
msgid "The device may not be ready, for example there may be no media in a removable media device (i.e. no CD-ROM in a CD drive), or in the case of a peripheral/portable device, the device may not be correctly connected."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:679
#, kde-format
msgid "You may not have permissions to initialize (\"mount\") the device. On UNIX systems, often system administrator privileges are required to initialize a device."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:683
#, kde-format
msgid "Check that the device is ready; removable drives must contain media, and portable devices must be connected and powered on.; and try again."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:689
#, kde-format
msgid "Unable to Uninitialize Input/Output Device"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:690
#, kde-format
msgid "Could Not Unmount Device"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:691
#, kde-format
msgid "The requested device could not be uninitialized (\"unmounted\"). The reported error was: <strong>%1</strong>"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:694
#, kde-format
msgid "The device may be busy, that is, still in use by another application or user. Even such things as having an open browser window on a location on this device may cause the device to remain in use."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:698
#, kde-format
msgid "You may not have permissions to uninitialize (\"unmount\") the device. On UNIX systems, system administrator privileges are often required to uninitialize a device."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:702
#, kde-format
msgid "Check that no applications are accessing the device, and try again."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:707
#, kde-format
msgid "Cannot Read From Resource"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:708
#, kde-format
msgid "This means that although the resource, <strong>%1</strong>, was able to be opened, an error occurred while reading the contents of the resource."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:711
#, kde-format
msgid "You may not have permissions to read from the resource."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:724
#, kde-format
msgid "Cannot Write to Resource"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:725
#, kde-format
msgid "This means that although the resource, <strong>%1</strong>, was able to be opened, an error occurred while writing to the resource."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:728
#, kde-format
msgid "You may not have permissions to write to the resource."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:741 core/job_error.cpp:752
#, kde-format
msgid "Could Not Listen for Network Connections"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:742
#, kde-format
msgid "Could Not Bind"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:743 core/job_error.cpp:754
#, kde-format
msgid "This is a fairly technical error in which a required device for network communications (a socket) could not be established to listen for incoming network connections."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:753
#, kde-format
msgid "Could Not Listen"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:763
#, kde-format
msgid "Could Not Accept Network Connection"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:764
#, kde-format
msgid "This is a fairly technical error in which an error occurred while attempting to accept an incoming network connection."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:768
#, kde-format
msgid "You may not have permissions to accept the connection."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:773
#, kde-format
msgid "Could Not Login: %1"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:774
#, kde-format
msgid "An attempt to login to perform the requested operation was unsuccessful."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:785
#, kde-format
msgid "Could Not Determine Resource Status"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:786
#, kde-format
msgid "Could Not Stat Resource"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:787
#, kde-format
msgid "An attempt to determine information about the status of the resource <strong>%1</strong>, such as the resource name, type, size, etc., was unsuccessful."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:790
#, kde-format
msgid "The specified resource may not have existed or may not be accessible."
msgstr ""
#. i18n( "Could not terminate listing %1" ).arg( errorText );
#. +> trunk5
#: core/job_error.cpp:798
#, kde-format
msgid "Could Not Cancel Listing"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:799
#, kde-format
msgid "FIXME: Document this"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:803
#, kde-format
msgid "Could Not Create Folder"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:804
#, kde-format
msgid "An attempt to create the requested folder failed."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:805
#, kde-format
msgid "The location where the folder was to be created may not exist."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:814
#, kde-format
msgid "Could Not Remove Folder"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:815
#, kde-format
msgid "An attempt to remove the specified folder, <strong>%1</strong>, failed."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:817
#, kde-format
msgid "The specified folder may not exist."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:818
#, kde-format
msgid "The specified folder may not be empty."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:823
#, kde-format
msgid "Ensure that the folder exists and is empty, and try again."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:828
#, kde-format
msgid "Could Not Resume File Transfer"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:829
#, kde-format
msgid "The specified request asked that the transfer of file <strong>%1</strong> be resumed at a certain point of the transfer. This was not possible."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:832
#, kde-format
msgid "The protocol, or the server, may not support file resuming."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:834
#, kde-format
msgid "Retry the request without attempting to resume transfer."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:839
#, kde-format
msgid "Could Not Rename Resource"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:840
#, kde-format
msgid "An attempt to rename the specified resource <strong>%1</strong> failed."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:850
#, kde-format
msgid "Could Not Alter Permissions of Resource"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:851
#, kde-format
msgid "An attempt to alter the permissions on the specified resource <strong>%1</strong> failed."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:858
#, kde-format
msgid "Could Not Change Ownership of Resource"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:859
#, kde-format
msgid "An attempt to change the ownership of the specified resource <strong>%1</strong> failed."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:866
#, kde-format
msgid "Could Not Delete Resource"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:867
#, kde-format
msgid "An attempt to delete the specified resource <strong>%1</strong> failed."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:874
#, kde-format
msgid "Unexpected Program Termination"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:875
#, kde-format
msgid "The program on your computer which provides access to the <strong>%1</strong> protocol has unexpectedly terminated."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:883
#, kde-format
msgid "Out of Memory"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:884
#, kde-format
msgid "The program on your computer which provides access to the <strong>%1</strong> protocol could not obtain the memory required to continue."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:892
#, kde-format
msgid "Unknown Proxy Host"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:893
#, kde-format
msgid "While retrieving information about the specified proxy host, <strong>%1</strong>, an Unknown Host error was encountered. An unknown host error indicates that the requested name could not be located on the Internet."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:897
#, kde-format
msgid "There may have been a problem with your network configuration, specifically your proxy's hostname. If you have been accessing the Internet with no problems recently, this is unlikely."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:901
#, kde-format
msgid "Double-check your proxy settings and try again."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:906
#, kde-format
msgid "Authentication Failed: Method %1 Not Supported"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:908
#, kde-format
msgid "Although you may have supplied the correct authentication details, the authentication failed because the method that the server is using is not supported by the KDE program implementing the protocol %1."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:912
#, kde-format
msgid "Please file a bug at <a href=\"https://bugs.kde.org/\">https://bugs.kde.org/</a> to inform the KDE team of the unsupported authentication method."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:918
#, kde-format
msgid "Request Aborted"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:925
#, kde-format
msgid "Internal Error in Server"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:926
#, kde-format
msgid "The program on the server which provides access to the <strong>%1</strong> protocol has reported an internal error: %2."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:929
#, kde-format
msgid "This is most likely to be caused by a bug in the server program. Please consider submitting a full bug report as detailed below."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:932
#, kde-format
msgid "Contact the administrator of the server to advise them of the problem."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:934
#, kde-format
msgid "If you know who the authors of the server software are, submit the bug report directly to them."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:939
#, kde-format
msgid "Timeout Error"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:940
#, kde-format
msgid ""
"Although contact was made with the server, a response was not received within the amount of time allocated for the request as follows:"
"<ul>"
"<li>Timeout for establishing a connection: %1 seconds</li>"
"<li>Timeout for receiving a response: %2 seconds</li>"
"<li>Timeout for accessing proxy servers: %3 seconds</li>"
"</ul>"
"Please note that you can alter these timeout settings in the KDE System Settings, by selecting Network Settings -> Connection Preferences."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:951
#, kde-format
msgid "The server was too busy responding to other requests to respond."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:957 core/slavebase.cpp:1521
#, kde-format
msgid "Unknown Error"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:958
#, kde-format
msgid "The program on your computer which provides access to the <strong>%1</strong> protocol has reported an unknown error: %2."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:966
#, kde-format
msgid "Unknown Interruption"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:967
#, kde-format
msgid "The program on your computer which provides access to the <strong>%1</strong> protocol has reported an interruption of an unknown type: %2."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:975
#, kde-format
msgid "Could Not Delete Original File"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:976
#, kde-format
msgid "The requested operation required the deleting of the original file, most likely at the end of a file move operation. The original file <strong>%1</strong> could not be deleted."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:985
#, kde-format
msgid "Could Not Delete Temporary File"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:986
#, kde-format
msgid "The requested operation required the creation of a temporary file in which to save the new file while being downloaded. This temporary file <strong>%1</strong> could not be deleted."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:995
#, kde-format
msgid "Could Not Rename Original File"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:996
#, kde-format
msgid "The requested operation required the renaming of the original file <strong>%1</strong>, however it could not be renamed."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:1004
#, kde-format
msgid "Could Not Rename Temporary File"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:1005
#, kde-format
msgid "The requested operation required the creation of a temporary file <strong>%1</strong>, however it could not be created."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:1013
#, kde-format
msgid "Could Not Create Link"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:1014
#, kde-format
msgid "Could Not Create Symbolic Link"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:1015
#, kde-format
msgid "The requested symbolic link %1 could not be created."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:1022
#, kde-format
msgid "No Content"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:1027
#, kde-format
msgid "Disk Full"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:1028
#, kde-format
msgid "The requested file <strong>%1</strong> could not be written to as there is inadequate disk space."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:1030
#, kde-format
msgid "Free up enough disk space by 1) deleting unwanted and temporary files; 2) archiving files to removable media storage such as CD-Recordable discs; or 3) obtain more storage capacity."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:1037
#, kde-format
msgid "Source and Destination Files Identical"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:1038
#, kde-format
msgid "The operation could not be completed because the source and destination files are the same file."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:1040
#, kde-format
msgid "Choose a different filename for the destination file."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:1044
#, kde-format
msgid "File or Folder dropped onto itself"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:1045
#, kde-format
msgid "The operation could not be completed because the source and destination file or folder are the same."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:1047
#, kde-format
msgid "Drop the item into a different file or folder."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:1057
#, kde-format
msgid "Folder moved into itself"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:1058
#, kde-format
msgid "The operation could not be completed because the source can not be moved into itself."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:1060
#, kde-format
msgid "Move the item into a different folder."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:1064
#, kde-format
msgid "Could not communicate with password server"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:1065
#, kde-format
msgid "The operation could not be completed because the service for requesting passwords (kpasswdserver) couldn't be contacted"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:1067
#, kde-format
msgid "Try restarting your session, or look in the logs for errors from kiod."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:1071
#, kde-format
msgid "Cannot Initiate the %1 Protocol"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:1072
#, kde-format
msgid "Unable to Create io-slave"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:1073
#, kde-format
msgid "The io-slave which provides access to the <strong>%1</strong> protocol could not be started. This is usually due to technical reasons."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:1076
#, kde-format
msgid "klauncher could not find or start the plugin which provides the protocol.This means you may have an outdated version of the plugin."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:1082
#, kde-kuit-format
msgctxt "@info"
msgid "Cannot transfer <filename>%1</filename>"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:1083
#, kde-kuit-format
msgctxt "@info"
msgid "The file <filename>%1</filename> cannot be transferred, because the destination filesystem does not support files that large"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:1085
#, kde-format
msgid "Reformat the destination drive to use a filesystem that supports files that large."
msgid "Would you like to accept this certificate forever without being prompted?"
msgstr ""
#. +> trunk5
#: core/tcpslavebase.cpp:882
#, kde-format
msgid "You have indicated that you wish to accept this certificate, but it is not issued to the server who is presenting it. Do you wish to continue loading?"
msgstr ""
#. +> trunk5
#: core/tcpslavebase.cpp:894
#, kde-format
msgid "SSL certificate is being rejected as requested. You can disable this in the KDE System Settings."
msgstr ""
#. +> trunk5
#: filewidgets/kdiroperator.cpp:754
#, kde-format
msgid "A file or folder named %1 already exists."
msgstr ""
#. +> trunk5
#: filewidgets/kdiroperator.cpp:757
#, kde-format
msgid "You do not have permission to create that folder."
"<qt>This is the text that will appear in the Places panel.<br />"
"<br />"
"The label should consist of one or two words that will help you remember what this entry refers to. If you do not enter a label, it will be derived from the location's URL.</qt>"
msgstr ""
#. +> trunk5
#: filewidgets/kfileplaceeditdialog.cpp:96
#, kde-format
msgid "L&abel:"
msgstr ""
#. +> trunk5
#: filewidgets/kfileplaceeditdialog.cpp:98
#, kde-format
msgid "Enter descriptive label here"
msgstr ""
#. +> trunk5
#: filewidgets/kfileplaceeditdialog.cpp:102
#, kde-format
msgid ""
"<qt>This is the location associated with the entry. Any valid URL may be used. For example:<br />"
"<br />"
"%1<br />"
"http://www.kde.org<br />"
"ftp://ftp.kde.org/pub/kde/stable<br />"
"<br />"
"By clicking on the button next to the text edit box you can browse to an appropriate URL.</qt>"
msgstr ""
#. +> trunk5
#: filewidgets/kfileplaceeditdialog.cpp:108
#, kde-format
msgid "&Location:"
msgstr ""
#. +> trunk5
#: filewidgets/kfileplaceeditdialog.cpp:115
#, kde-format
msgid ""
"<qt>This is the icon that will appear in the Places panel.<br />"
"<br />"
"Click on the button to select a different icon.</qt>"
msgstr ""
#. +> trunk5
#: filewidgets/kfileplaceeditdialog.cpp:118
#, kde-format
msgid "Choose an &icon:"
msgstr ""
#. +> trunk5
#: filewidgets/kfileplaceeditdialog.cpp:137
#, kde-format
msgid "&Only show when using this application (%1)"
msgstr ""
#. +> trunk5
#: filewidgets/kfileplaceeditdialog.cpp:139
#, kde-format
msgid ""
"<qt>Select this setting if you want this entry to show only when using the current application (%1).<br />"
"<br />"
"If this setting is not selected, the entry will be available in all applications.</qt>"
msgstr ""
#. +> trunk5
#: filewidgets/kfileplacesitem.cpp:129
#, kde-format
msgctxt "@item"
msgid "Places"
msgstr ""
#. +> trunk5
#: filewidgets/kfileplacesitem.cpp:132
#, kde-format
msgctxt "@item"
msgid "Remote"
msgstr ""
#. +> trunk5
#: filewidgets/kfileplacesitem.cpp:135
#, kde-format
msgctxt "@item The place group section name for recent dynamic lists"
msgid "<qt>While typing in the text area, you may be presented with possible matches. This feature can be controlled by clicking with the right mouse button and selecting a preferred mode from the <b>Text Completion</b> menu.</qt>"
msgstr ""
#. +> trunk5
#: filewidgets/kfilewidget.cpp:408
#, kde-format
msgid "Drive: %1"
msgstr ""
#. +> trunk5
#: filewidgets/kfilewidget.cpp:459
#, kde-format
msgid ""
"<qt>Click this button to enter the parent folder.<br />"
"<br />"
"For instance, if the current location is file:/home/konqi clicking this button will take you to file:/home.</qt>"
msgstr ""
#. +> trunk5
#: filewidgets/kfilewidget.cpp:463
#, kde-format
msgid "Click this button to move backwards one step in the browsing history."
msgstr ""
#. +> trunk5
#: filewidgets/kfilewidget.cpp:464
#, kde-format
msgid "Click this button to move forward one step in the browsing history."
msgstr ""
#. +> trunk5
#: filewidgets/kfilewidget.cpp:466
#, kde-format
msgid "Click this button to reload the contents of the current location."
msgstr ""
#. +> trunk5
#: filewidgets/kfilewidget.cpp:468
#, kde-format
msgid "Click this button to create a new folder."
msgstr ""
#. +> trunk5
#: filewidgets/kfilewidget.cpp:474
#, kde-format
msgid "Show Places Panel"
msgstr ""
#. +> trunk5
#: filewidgets/kfilewidget.cpp:481
#, kde-format
msgid "Show Bookmarks Button"
msgstr ""
#. +> trunk5
#: filewidgets/kfilewidget.cpp:487
#, kde-format
msgid "Options"
msgstr ""
#. +> trunk5
#: filewidgets/kfilewidget.cpp:489
#, kde-format
msgid ""
"<qt>This is the preferences menu for the file dialog. Various options can be accessed from this menu including: "
msgid "The selected URL uses an unsupported scheme. Please use the following scheme: %2"
msgid_plural "The selected URL uses an unsupported scheme. Please use one of the following schemes: %2"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5
#: filewidgets/kfilewidget.cpp:1022
#, kde-format
msgid "Unsupported URL scheme"
msgstr ""
#. +> trunk5
#: filewidgets/kfilewidget.cpp:1037
#, kde-format
msgid "More than one folder has been selected and this dialog does not accept folders, so it is not possible to decide which one to enter. Please select only one folder to list it."
msgstr ""
#. +> trunk5
#: filewidgets/kfilewidget.cpp:1037
#, kde-format
msgid "More than one folder provided"
msgstr ""
#. +> trunk5
#: filewidgets/kfilewidget.cpp:1045
#, kde-format
msgid "At least one folder and one file has been selected. Selected files will be ignored and the selected folder will be listed"
msgstr ""
#. +> trunk5
#: filewidgets/kfilewidget.cpp:1045
#, kde-format
msgid "Files and folders selected"
msgstr ""
#. +> trunk5
#: filewidgets/kfilewidget.cpp:1063
#, kde-format
msgid "The file \"%1\" could not be found"
msgstr ""
#. +> trunk5
#: filewidgets/kfilewidget.cpp:1063
#, kde-format
msgid "Cannot open file"
msgstr ""
#. +> trunk5
#: filewidgets/kfilewidget.cpp:1347
#, kde-format
msgid "This is the name to save the file as."
msgstr ""
#. +> trunk5
#: filewidgets/kfilewidget.cpp:1350
#, kde-format
msgid "This is the list of files to open. More than one file can be specified by listing several files, separated by spaces."
msgstr ""
#. +> trunk5
#: filewidgets/kfilewidget.cpp:1355
#, kde-format
msgid "This is the name of the file to open."
msgstr ""
#. +> trunk5
#: filewidgets/kfilewidget.cpp:1369
#, kde-format
msgctxt "@title:window"
msgid "Places"
msgstr ""
#. +> trunk5
#: filewidgets/kfilewidget.cpp:1577
#, kde-format
msgid "The file \"%1\" already exists. Do you wish to overwrite it?"
"This option enables some convenient features for saving files with extensions:<br />"
"<ol>"
"<li>Any extension specified in the <b>%1</b> text area will be updated if you change the file type to save in.<br />"
"<br />"
"</li>"
"<li>If no extension is specified in the <b>%2</b> text area when you click <b>Save</b>, %3 will be added to the end of the filename (if the filename does not already exist). This extension is based on the file type that you have chosen to save in.<br />"
"<br />"
"If you do not want KDE to supply an extension for the filename, you can either turn this option off or you can suppress it by adding a period (.) to the end of the filename (the period will be automatically removed).</li>"
"</ol>"
"If unsure, keep this option enabled as it makes your files more manageable."
msgstr ""
#. +> trunk5
#: filewidgets/kfilewidget.cpp:2673
#, kde-format
msgid "Bookmarks"
msgstr ""
#. +> trunk5
#: filewidgets/kfilewidget.cpp:2677
#, kde-format
msgid ""
"<qt>This button allows you to bookmark specific locations. Click on this button to open the bookmark menu where you may add, edit or select a bookmark.<br />"
"<br />"
"These bookmarks are specific to the file dialog, but otherwise operate like bookmarks elsewhere in KDE.</qt>"
msgstr ""
#. +> trunk5
#: filewidgets/kfilewidget.cpp:2820
#, kde-format
msgid "&File type:"
msgstr ""
#. +> trunk5
#: filewidgets/kfilewidget.cpp:2821
#, kde-format
msgid "<qt>This is the file type selector. It is used to select the format that the file will be saved as.</qt>"
msgstr ""
#. +> trunk5
#: filewidgets/kfilewidget.cpp:2823
#, kde-format
msgid "&Filter:"
msgstr ""
#. +> trunk5
#: filewidgets/kfilewidget.cpp:2824
#, kde-format
msgid ""
"<qt>This is the filter to apply to the file list. File names that do not match the filter will not be shown."
"<p>You may select from one of the preset filters in the drop down menu, or you may enter a custom filter directly into the text area.</p>"
"<p>Wildcards such as * and ? are allowed.</p>"
"</qt>"
msgstr ""
#. +> trunk5
#: filewidgets/knewfilemenu.cpp:390
#, kde-format
msgid "Sorry"
msgstr ""
#. +> trunk5
#: filewidgets/knewfilemenu.cpp:399
#, kde-format
msgid "<qt>The template file <b>%1</b> does not exist.</qt>"
"Could not create a folder with the name <filename>%1</filename><nl/>"
"because it is reserved for use by the operating system."
msgstr ""
#. +> trunk5
#: filewidgets/knewfilemenu.cpp:1055
#, kde-kuit-format
msgctxt "@info"
msgid "The name <filename>%1</filename> cannot be used because it is reserved for use by the operating system."
msgstr ""
#. +> trunk5
#: filewidgets/knewfilemenu.cpp:1063
#, kde-kuit-format
msgctxt "@info"
msgid "The name <filename>%1</filename> starts with a dot, so it will be hidden by default."
msgstr ""
#. +> trunk5
#: filewidgets/knewfilemenu.cpp:1080
#, kde-format
msgid "Using slashes in folder names will create sub-folders, like so:"
msgstr ""
#. +> trunk5
#: filewidgets/knewfilemenu.cpp:1090
#, kde-format
msgid "Using slashes in folder names will create sub-folders."
msgstr ""
#. +> trunk5
#: filewidgets/knewfilemenu.cpp:1102
#, kde-format
msgid "Slashes cannot be used in file and folder names."
msgstr ""
#. +> trunk5
#: filewidgets/knewfilemenu.cpp:1108
#, kde-format
msgid "Backslashes cannot be used in file and folder names."
msgstr ""
#. +> trunk5
#: filewidgets/knewfilemenu.cpp:1117
#, kde-format
msgid "Starting a file or folder name with a tilde is not recommended because it may be confusing or dangerous when using the terminal to delete things."
msgid "The destination resource does not have sufficient space to record the state of the resource after the execution of this method."
msgstr ""
#. +> trunk5
#: ioslaves/http/http.cpp:1778
#, kde-format
msgid "The resource cannot be deleted."
msgstr ""
#. +> trunk5
#: ioslaves/http/http.cpp:1791
#, kde-format
msgctxt "request type"
msgid "upload %1"
msgstr ""
#. +> trunk5
#: ioslaves/http/http.cpp:1841
#, kde-format
msgctxt "%1: response code, %2: request type"
msgid "An unexpected error (%1) occurred while attempting to %2."
msgstr ""
#. +> trunk5
#: ioslaves/http/http.cpp:2659
#, kde-format
msgid "%1 contacted. Waiting for reply..."
msgstr ""
#. +> trunk5
#: ioslaves/http/http.cpp:3003
#, kde-format
msgctxt "@info Security check on url being accessed"
msgid ""
"<p>You are about to log in to the site \"%1\" with the username \"%2\", but the website does not require authentication. This may be an attempt to trick you.</p>"
msgid "Accept cookie(s) until the end of the current session"
msgstr ""
#. +> trunk5
#: ioslaves/http/kcookiejar/kcookiewin.cpp:133
#, kde-format
msgid "&Accept"
msgstr ""
#. +> trunk5
#: ioslaves/http/kcookiejar/kcookiewin.cpp:136
#, kde-format
msgid "&Reject"
msgstr ""
#. +> trunk5
#: ioslaves/http/kcookiejar/kcookiewin.cpp:172
#, kde-format
msgid "Apply Choice To"
msgstr ""
#. +> trunk5
#: ioslaves/http/kcookiejar/kcookiewin.cpp:175
#, kde-format
msgid "&Only this cookie"
msgstr ""
#. +> trunk5
#: ioslaves/http/kcookiejar/kcookiewin.cpp:175
#, kde-format
msgid "&Only these cookies"
msgstr ""
#. +> trunk5
#: ioslaves/http/kcookiejar/kcookiewin.cpp:179
#, kde-format
msgid "Select this option to only accept or reject this cookie. You will be prompted again if you receive another cookie."
msgstr ""
#. +> trunk5
#: ioslaves/http/kcookiejar/kcookiewin.cpp:182
#, kde-format
msgid "All cookies from this do&main"
msgstr ""
#. +> trunk5
#: ioslaves/http/kcookiejar/kcookiewin.cpp:185
#, kde-format
msgid "Select this option to accept or reject all cookies from this site. Choosing this option will add a new policy for the site this cookie originated from. This policy will be permanent until you manually change it from the System Settings."
msgstr ""
#. +> trunk5
#: ioslaves/http/kcookiejar/kcookiewin.cpp:190
#, kde-format
msgid "All &cookies"
msgstr ""
#. +> trunk5
#: ioslaves/http/kcookiejar/kcookiewin.cpp:193
#, kde-format
msgid "Select this option to accept/reject all cookies from anywhere. Choosing this option will change the global cookie policy for all cookies until you manually change it from the System Settings."
msgid "You do not have permission to access the %1 protocol."
msgstr ""
#. +> trunk5
#: ioslaves/trash/kcmtrash.cpp:156
#, kde-format
msgid " days"
msgstr ""
#. +> trunk5
#: ioslaves/trash/kcmtrash.cpp:220
#, kde-format
msgid ""
"<para>KDE's wastebin is configured to use the <b>Finder</b>'s Trash.<br>"
"</para>"
msgstr ""
#. +> trunk5
#: ioslaves/trash/kcmtrash.cpp:222
#, kde-format
msgctxt "@info:whatsthis"
msgid ""
"<para>Emptying KDE's wastebin will remove only KDE's trash items, while<br>"
"emptying the Trash through the Finder will delete everything.</para>"
"<para>KDE's trash items will show up in a folder called KDE.trash, in the Trash can.</para>"
msgstr ""
#. +> trunk5
#: ioslaves/trash/kcmtrash.cpp:259
#, kde-format
msgid "Delete files older than"
msgstr ""
#. +> trunk5
#: ioslaves/trash/kcmtrash.cpp:261
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid "<para>Check this box to allow <emphasis strong='true'>automatic deletion</emphasis> of files that are older than the value specified. Leave this disabled to <emphasis strong='true'>not</emphasis> automatically delete any items after a certain timespan</para>"
msgstr ""
#. +> trunk5
#: ioslaves/trash/kcmtrash.cpp:268
#, kde-format
msgid " day"
msgid_plural " days"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5
#: ioslaves/trash/kcmtrash.cpp:270
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid "<para>Set the number of days that files can remain in the trash. Any files older than this will be automatically deleted.</para>"
msgstr ""
#. +> trunk5
#: ioslaves/trash/kcmtrash.cpp:274
#, kde-format
msgid "Cleanup:"
msgstr ""
#. +> trunk5
#: ioslaves/trash/kcmtrash.cpp:278
#, kde-format
msgid "Limit to"
msgstr ""
#. +> trunk5
#: ioslaves/trash/kcmtrash.cpp:280
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid "<para>Check this box to limit the trash to the maximum amount of disk space that you specify below. Otherwise, it will be unlimited.</para>"
msgid "<para>This is the maximum percent of disk space that will be used for the trash.</para>"
msgstr ""
#. +> trunk5
#: ioslaves/trash/kcmtrash.cpp:297
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid "<para>This is the calculated amount of disk space that will be allowed for the trash, the maximum.</para>"
msgstr ""
#. +> trunk5
#: ioslaves/trash/kcmtrash.cpp:302
#, kde-format
msgid "Show a Warning"
msgstr ""
#. +> trunk5
#: ioslaves/trash/kcmtrash.cpp:303
#, kde-format
msgid "Delete Oldest Files From Trash"
msgstr ""
#. +> trunk5
#: ioslaves/trash/kcmtrash.cpp:304
#, kde-format
msgid "Delete Biggest Files From Trash"
msgstr ""
#. +> trunk5
#: ioslaves/trash/kcmtrash.cpp:306
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid "<para>When the size limit is reached, it will prefer to delete the type of files that you specify, first. If this is set to warn you, it will do so instead of automatically deleting files.</para>"
msgid "The directory %1 does not exist anymore, so it is not possible to restore this item to its original location. You can either recreate that directory and use the restore operation again, or drag the item anywhere else to restore it."
msgid "Internal error in copyOrMove, should never happen"
msgstr ""
#. +> trunk5
#: ioslaves/trash/ktrash.cpp:39
#, kde-format
msgid ""
"Helper program to handle the KDE trash can\n"
"Note: to move files to the trash, do not use ktrash, but \"kioclient move 'url' trash:/\""
msgstr ""
#. +> trunk5
#: ioslaves/trash/ktrash.cpp:42
#, kde-format
msgid "Empty the contents of the trash"
msgstr ""
#. +> trunk5
#: ioslaves/trash/ktrash.cpp:43
#, kde-format
msgid "Restore a trashed file to its original location"
msgstr ""
#. +> trunk5
#: ioslaves/trash/trashimpl.cpp:1380
#, kde-format
msgid "The file is too large to be trashed."
msgstr ""
#. +> trunk5
#: ioslaves/trash/trashimpl.cpp:1386
#, kde-format
msgid ""
"The trash has reached its maximum size!\n"
"Cleanup the trash manually."
msgstr ""
#. +> trunk5
#: kcms/kio/cache.cpp:113
#, kde-format
msgid ""
"<h1>Cache</h1>"
"<p>This module lets you configure your cache settings.</p>"
"<p>This specific cache is an area on the disk where recently read web pages are stored. If you want to retrieve a web page again that you have recently read, it will not be downloaded from the Internet, but rather retrieved from the cache, which is a lot faster.</p>"
msgid "Check this box if you want the web pages you visit to be stored on your hard disk for quicker access. The stored pages will only be updated as needed instead of on every visit to that site. This is especially useful if you have a slow connection to the Internet."
msgid "Do not fetch web pages that are not already stored in the cache. Offline mode prevents you from viewing pages that you have not previously visited."
"<p>Cookies contain information that KDE applications using the HTTP protocol (like Konqueror) store on your computer, initiated by a remote Internet server. This means that a web server can store information about you and your browsing activities on your machine for later use. You might consider this an invasion of privacy.</p>"
"<p> However, cookies are useful in certain situations. For example, they are often used by Internet shops, so you can 'put things into a shopping basket'. Some sites require you have a browser that supports cookies.</p>"
"<p> Because most people want a compromise between privacy and the benefits cookies offer, the HTTP kioslave offers you the ability to customize the way it handles cookies. So you might want to set the default policy to ask you whenever a server wants to set a cookie, allowing you to decide. For your favorite shopping web sites that you trust, you might want to set the policy to accept, then you can access the web sites without being prompted every time a cookie is received.</p>"
"Unable to communicate with the cookie handler service.\n"
"Any changes you made will not take effect until the service is restarted."
msgstr ""
#. +> trunk5
#: kcms/kio/kcookiespolicies.cpp:439
#, kde-format
msgid ""
"<h1>Cookies</h1>"
"<p>Cookies contain information that KDE application using the HTTP protocol (like Konqueror) stores on your computer from a remote Internet server. This means that a web server can store information about you and your browsing activities on your machine for later use. You might consider this an invasion of privacy.</p>"
"<p>However, cookies are useful in certain situations. For example, they are often used by Internet shops, so you can 'put things into a shopping basket'. Some sites require you have a browser that supports cookies.</p>"
"<p>Because most people want a compromise between privacy and the benefits cookies offer, KDE offers you the ability to customize the way it handles cookies. You might, for example want to set KDE's default policy to ask you whenever a server wants to set a cookie or simply reject or accept everything. For example, you might choose to accept all cookies from your favorite shopping web site. For this all you have to do is either browse to that particular site and when you are presented with the cookie dialog box, click on <i> This domain </i> under the 'apply to' tab and choose accept or simply specify the name of the site in the <i> Domain Specific Policy </i> tab and set it to accept. This enables you to receive cookies from trusted web sites without being asked every time KDE receives a cookie.</p>"
"Reject the so called third-party cookies. These are cookies that originate from a site other than the one you are currently browsing. For example, if you visit <b>www.foobar.com</b> while this option is on, only cookies that originate from www.foobar.com will be processed per your settings. Cookies from any other site will be rejected. This reduces the chances of site operators compiling a profile about your daily browsing habits.\n"
"Automatically accept temporary cookies meant to expire at the end of the current session. Such cookies will not be stored in your computer's hard drive or storage device. Instead, they are deleted when you close all applications (e.g. your browser) that use them.</p>"
"<p><u>NOTE</u> Checking this option overrides your default as well as site specific cookie policies for session cookies.</p>"
"To add a new policy, simply click on the <b>Add...</b> button and supply the necessary information. To change an existing policy, use the <b>Change...</b> button and choose the new policy from the policy dialog box. Clicking on the <b>Delete</b> button will remove the currently selected policy causing the default policy setting to be used for that domain, whereas <b>Delete All</b> will remove all the site specific policies.\n"
#. i18n: ectx: label, entry (DisablePassiveMode), group (DesktopIcons)
#. +> trunk5
#: kcms/kio/kio_ftprc.kcfg:10
#, kde-format
msgid "Disable Passive FTP"
msgstr ""
#. i18n: ectx: whatsthis, entry (DisablePassiveMode), group (DesktopIcons)
#. +> trunk5
#: kcms/kio/kio_ftprc.kcfg:11
#, kde-format
msgid "When FTP connections are passive the client connects to the server, instead of the other way round, so firewalls do not block the connection; old FTP servers may not support Passive FTP though."
msgstr ""
#. i18n: ectx: label, entry (MarkPartial), group (Global Options)
#. i18n: ectx: label, entry (MarkPartial), group (DesktopIcons)
msgid "While a file is being uploaded its extension is \".part\". When fully uploaded it is renamed to its real name."
msgstr ""
#. +> trunk5
#: kcms/kio/kproxydlg.cpp:529
#, kde-format
msgid ""
"<h1>Proxy</h1>"
"<p>A proxy server is an intermediate program that sits between your machine and the Internet and provides services such as web page caching and/or filtering.</p>"
"<p>Caching proxy servers give you faster access to sites you have already visited by locally storing or caching the content of those pages; filtering proxy servers, on the other hand, provide the ability to block out requests for ads, spam, or anything else you want to block.</p>"
"<p><u>Note:</u> Some proxy servers provide both services.</p>"
"A proxy server is an intermediate machine that sits between your computer and the Internet and provides services such as web page caching and filtering. Caching proxy servers give you faster access to web sites you have already visited by locally storing or caching those pages; filtering proxy servers usually provide the ability to block out requests for ads, spam, or anything else you want to block.\n"
"<p>\n"
"If you are uncertain whether or not you need to use a proxy server to connect to the Internet, consult your Internet service provider's setup guide or your system administrator.\n"
"Automatically detect and configure the proxy settings."
"<p>\n"
"Automatic detection is performed using the <b>Web Proxy Auto-Discovery Protocol (WPAD)</b>."
"<p>\n"
"<b>NOTE:</b> This option might not work properly or not work at all in some UNIX/Linux distributions. If you encounter a problem when using this option, please check the FAQ section at https://konqueror.org.\n"
"<p>Use proxy settings defined on the system.</p>"
"\n"
"<p>Some platforms offer system wide proxy configuration information and selecting this option allows you to use those settings.</p>"
"\n"
"<p>On Mac platforms</p>"
"\n"
"<p>On Windows platforms</p>"
"\n"
"<p>On Unix and Linux platforms, such system proxy settings are usually defined through environment variables. The following environment variables are detected and used when present: <b>HTTP_PROXY</b>, <b>HTTPS_PROXY</b>, <b>FTP_PROXY</b>, <b>NO_PROXY</b>.</p>"
"<qt>Enter the environment variable, e.g. <b>NO_PROXY</b>, used to store the addresses of sites for which the above proxy settings should not be used."
"<p>Alternatively, you can click on the <b>\"Auto Detect\"</b> button to attempt an automatic discovery of this variable.</p>"
"<p>Enter a comma separated list of hostnames or ip addresses that should be excluded from using the above proxy settings.</p>"
"\n"
"<p>If you want to exclude all hosts for a given domain, then simply enter the domain name preceded by a dot. For example, to exclude all hostnames for <i>kde.org</i>, enter <i>.kde.org</i>. Wildcard characters such as '*' or '?' are not supported and will have no effect.</p>"
"\n"
"<p>Additionally, you can also enter IP addresses, e.g. 127.0.0.1 and IP addresses with a subnet, e.g. 192.168.0.1/24.</p>"
"<p>Marks partially uploaded files through SMB, SFTP and other protocols.</p>"
"<p>When this option is enabled, partially uploaded files will have a \".part\" extension. This extension will be removed once the transfer is complete.</p>"
msgstr ""
#. +> trunk5
#: kcms/kio/netpref.cpp:85
#, kde-format
msgid "FTP Options"
msgstr ""
#. +> trunk5
#: kcms/kio/netpref.cpp:89
#, kde-format
msgid "Enable passive &mode (PASV)"
msgstr ""
#. +> trunk5
#: kcms/kio/netpref.cpp:90
#, kde-format
msgid "Enables FTP's \"passive\" mode. This is required to allow FTP to work from behind firewalls."
msgstr ""
#. +> trunk5
#: kcms/kio/netpref.cpp:98
#, kde-format
msgid ""
"<p>Marks partially uploaded FTP files.</p>"
"<p>When this option is enabled, partially uploaded files will have a \".part\" extension. This extension will be removed once the transfer is complete.</p>"
msgstr ""
#. +> trunk5
#: kcms/kio/netpref.cpp:173
#, kde-format
msgid ""
"<h1>Network Preferences</h1>"
"Here you can define the behavior of KDE programs when using Internet and network connections. If you experience timeouts or use a modem to connect to the Internet, you might want to adjust these settings."
msgstr ""
#. +> trunk5
#: kcms/kio/smbrodlg.cpp:44
#, kde-format
msgid "These settings apply to network browsing only."
msgstr ""
#. +> trunk5
#: kcms/kio/smbrodlg.cpp:48
#, kde-format
msgid "Default user name:"
msgstr ""
#. +> trunk5
#: kcms/kio/smbrodlg.cpp:56
#, kde-format
msgid "Default password:"
msgstr ""
#. +> trunk5
#: kcms/kio/smbrodlg.cpp:173
#, kde-format
msgid ""
"<h1>Windows Shares</h1>"
"<p>Applications using the SMB kioslave (like Konqueror) are able to access shared Microsoft Windows file systems, if properly configured.</p>"
"<p>You can specify here the credentials used to access the shared resources. Passwords will be stored locally, and scrambled so as to render them unreadable to the human eye. For security reasons, you may not want to do that, as entries with passwords are clearly indicated as such.</p>"
msgstr ""
#. +> trunk5
#: kcms/kio/useragentdlg.cpp:81
#, kde-format
msgctxt "@title:window"
msgid "Add Identification"
msgstr ""
#. +> trunk5
#: kcms/kio/useragentdlg.cpp:147
#, kde-format
msgctxt "@title:window"
msgid "Modify Identification"
msgstr ""
#. +> trunk5
#: kcms/kio/useragentdlg.cpp:195
#, kde-format
msgid ""
"<qt>"
"<center>Found an existing identification for<br/>"
"<b>%1</b><br/>"
"Do you want to replace it?</center>"
"</qt>"
msgstr ""
#. +> trunk5
#: kcms/kio/useragentdlg.cpp:200
#, kde-format
msgctxt "@title:window"
msgid "Duplicate Identification"
msgstr ""
#. +> trunk5
#: kcms/kio/useragentdlg.cpp:372
#, kde-format
msgid ""
"<h1>Browser Identification</h1>"
"<p>The browser-identification module allows you to have full control over how KDE applications using the HTTP protocol (like Konqueror) will identify itself to web sites you browse.</p>"
"<p>This ability to fake identification is necessary because some web sites do not display properly when they detect that they are not talking to current versions of either Netscape Navigator or Internet Explorer, even if the browser actually supports all the necessary features to render those pages properly. For such sites, you can use this feature to try to browse them. Please understand that this might not always work, since such sites might be using non-standard web protocols and or specifications.</p>"
"<p><u>NOTE:</u> To obtain specific help on a particular section of the dialog box, simply click on the quick help button on the window title bar, then click on the section for which you are seeking help.</p>"
"Here you can modify the default browser-identification text or set a site <code>(eg. www.kde.org)</code> or a domain <code>(eg. kde.org)</code> specific identification text."
"<p>\n"
"To add a new site-specific identification text, click the <code>New</code> button and supply the necessary information. To change an existing site-specific entry, click on the <code>Change</code> button. The <code>Delete</code> button will remove the selected site-specific identification text, causing the default setting to be used for that site or domain.\n"
"<u>NOTE:</u> Many sites rely on this information to display pages properly, hence, it is highly recommended that you do not totally disable this feature but rather customize it."
"<p>\n"
"By default, only minimal identification information is sent to remote sites. The identification text that will be sent is shown below.\n"
"Enter the site or domain name where a fake browser identification should be used."
"<p>\n"
"<u>NOTE:</u> Wildcard syntax such as \\\"*,?\\\" is NOT allowed: instead, use the top level address of a site to make generic matches; for example, if you want all KDE sites to receive a fake browser identification, you would enter <code>kde.org</code> - the fake identity would then be sent to any KDE site that ends with <code>kde.org</code>.</p>"
" In this module you can configure some enhanced browsing features of KDE. "
"<h2>Web Shortcuts</h2>"
"Web Shortcuts are a quick way of using Web search engines. For example, type \"duckduckgo:frobozz\" or \"dd:frobozz\" and your web browser will do a search on DuckDuckGo for \"frobozz\". Even easier: just press Alt+F2 (if you have not changed this keyboard shortcut) and enter the shortcut in the Run Command dialog."
msgstr ""
#. +> trunk5
#: kioexec/kioexecd.cpp:99
#, kde-format
msgid ""
"The file %1\n"
"has been modified. Do you want to upload the changes?"
msgid "(c) 1998-2000,2003 The KFM/Konqueror Developers"
msgstr ""
#. +> trunk5
#: kioexec/main.cpp:280
#, kde-format
msgid "David Faure"
msgstr ""
#. +> trunk5
#: kioexec/main.cpp:281
#, kde-format
msgid "Stephan Kulow"
msgstr ""
#. +> trunk5
#: kioexec/main.cpp:282
#, kde-format
msgid "Bernhard Rosenkraenzer"
msgstr ""
#. +> trunk5
#: kioexec/main.cpp:283
#, kde-format
msgid "Waldo Bastian"
msgstr ""
#. +> trunk5
#: kioexec/main.cpp:284
#, kde-format
msgid "Oswald Buddenhagen"
msgstr ""
#. +> trunk5
#: kioexec/main.cpp:289
#, kde-format
msgid "Treat URLs as local files and delete them afterwards"
msgstr ""
#. +> trunk5
#: kioexec/main.cpp:290
#, kde-format
msgid "Suggested file name for the downloaded file"
msgstr ""
#. +> trunk5
#: kioexec/main.cpp:291
#, kde-format
msgid "Command to execute"
msgstr ""
#. +> trunk5
#: kioexec/main.cpp:292
#, kde-format
msgid "URL(s) or local file(s) used for 'command'"
msgstr ""
#. +> trunk5
#: kpac/discovery.cpp:112
#, kde-format
msgid "Could not find a usable proxy configuration script"
msgstr ""
#. +> trunk5
#: kpac/downloader.cpp:93
#, kde-format
msgid ""
"Could not download the proxy configuration script:\n"
"%1"
msgstr ""
#. +> trunk5
#: kpac/downloader.cpp:96
#, kde-format
msgid "Could not download the proxy configuration script"
msgstr ""
#. +> trunk5
#: kpac/proxyscout.cpp:240
#, kde-format
msgid ""
"The proxy configuration script is invalid:\n"
"%1"
msgstr ""
#. +> trunk5
#: kpac/proxyscout.cpp:353
#, kde-format
msgid ""
"The proxy configuration script returned an error:\n"
"%1"
msgstr ""
#. +> trunk5
#: kpac/script.cpp:686
#, kde-format
msgid "Could not find 'FindProxyForURL' or 'FindProxyForURLEx'"
msgstr ""
#. +> trunk5
#: kpac/script.cpp:704
#, kde-format
msgid "Got an invalid reply when calling %1 -> %2"
msgstr ""
#. +> trunk5
#: kpasswdserver/kpasswdserver.cpp:563
#, kde-format
msgid "Do you want to retry?"
msgstr ""
#. +> trunk5
#: kpasswdserver/kpasswdserver.cpp:568
#, kde-format
msgid "Retry Authentication"
msgstr ""
#. +> trunk5
#: kpasswdserver/kpasswdserver.cpp:572
#, kde-format
msgctxt "@action:button filter-continue"
msgid "Retry"
msgstr ""
#. +> trunk5
#: kpasswdserver/kpasswdserver.cpp:859
#, kde-format
msgid "Authentication Dialog"
msgstr ""
#. +> trunk5
#: urifilters/ikws/ikwsopts.cpp:50
#, kde-format
msgctxt "@title:column Name label from web shortcuts column"
msgid "Name"
msgstr ""
#. +> trunk5
#: urifilters/ikws/ikwsopts.cpp:52
#, kde-format
msgctxt "@title:column"
msgid "Shortcuts"
msgstr ""
#. +> trunk5
#: urifilters/ikws/ikwsopts.cpp:54
#, kde-format
msgctxt "@title:column"
msgid "Preferred"
msgstr ""
#. +> trunk5
#: urifilters/ikws/ikwsopts.cpp:105
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid ""
"Check this box to select the highlighted web shortcut as preferred.<nl/>"
"Preferred web shortcuts are used in places where only a few select shortcuts can be shown at one time."
msgstr ""
#. +> trunk5
#: urifilters/ikws/ikwsopts.cpp:202
#, kde-format
msgctxt "@item:inlistbox No default web shortcut"
msgid "None"
msgstr ""
#. +> trunk5
#: urifilters/ikws/ikwsopts.cpp:268
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<para>In this module you can configure the web shortcuts feature. Web shortcuts allow you to quickly search or lookup words on the Internet. For example, to search for information about the KDE project using the Google engine, you simply type <emphasis>gg:KDE</emphasis> or <emphasis>google:KDE</emphasis>.</para>"
"<para>If you select a default search engine, then you can search for normal words or phrases by simply typing them into the input widget of applications that have built-in support for such a feature, e.g Konqueror.</para>"
"<p>Web shortcuts allow you to quickly access or search for information located online or on your hard drive. </p>"
"<p>KDE comes with many predefined Web shortcuts. One such Web shortcut is the Google (TM) search shortcut. To use it, you simply type the keyword 'gg' followed by the keyword delimiter and the search term, e.g. <span style=\" font-weight:600;\">gg:KDE</span>.</p>"
"Select the search engine to use for input boxes that provide automatic lookup services when you type in normal words and phrases instead of a URL. To disable this feature select <b>None</b> from the list.\n"
"<p>This allows applications to automatically convert the typed word or phrase to web shortcut queries when they cannot be filtered into a proper URL. </p>"
"<p>To disable this functionality select <span style=\" font-weight:600;\">None</span> from the list. </p>"
"Enter the URI that is used to perform a search on the search engine here.<br/>"
"The whole text to be searched for can be specified as \\{@} or \\{0}.<br/>"
"\n"
"Recommended is \\{@}, since it removes all query variables (name=value) from the resulting string, whereas \\{0} will be substituted with the unmodified query string.<br/>"
"You can use \\{1} ... \\{n} to specify certain words from the query and \\{name} to specify a value given by 'name=value' in the user query.<br/>"
"In addition it is possible to specify multiple references (names, numbers and strings) at once (\\{name1,name2,...,\"string\"}).<br/>"
"The first matching value (from the left) will be used as the substitution value for the resulting URI.<br/>"
"A quoted string can be used as the default value if nothing matches from the left of the reference list.\n"
"The shortcuts entered here can be used as a pseudo-URI scheme in KDE. For example, the shortcut <b>av</b> can be used as in <b>av</b>:<b>my search</b>\n"
msgid "Check this option if the application you want to run is a text mode application or if you want the information that is provided by the terminal emulator window."
msgid "Check this option if the text mode application offers relevant information on exit. Keeping the terminal emulator open allows you to retrieve this information."
msgid "Check this option if you want to run this application with a different user id. Every process has a different user id associated with it. This id code determines file access and other permissions. The password of the user is required to use this option."
msgid "Check this option if you want to make clear that your application has started. This visual feedback may appear as a busy cursor or in the taskbar."
msgid "Type the name you want to give to this application here. This application will appear under this name in the applications menu and in the panel."
"<p>This list should show the types of file that your application can handle. This list is organized by <u>mimetypes</u>.</p>"
"\n"
"<p>MIME, Multipurpose Internet (e)Mail Extension, is a standard protocol for identifying the type of data based on filename extensions and correspondent <u>mimetypes</u>. Example: the \"bmp\" part that comes after the dot in flower.bmp indicates that it is a specific kind of image, <u>image/x-bmp</u>. To know which application should open each type of file, the system should be informed about the abilities of each application to handle these extensions and mimetypes.</p>"
"\n"
"<p>If you want to associate this application with one or more mimetypes that are not in this list, click on the button <b>Add</b> below. If there are one or more filetypes that this application cannot handle, you may want to remove them from the list clicking on the button <b>Remove</b> below.</p>"
msgid "If you want to remove a type of file (mimetype) that your application cannot handle, select the mimetype in the list above and click on this button."
msgid "This file is a link and does not have permissions."
msgid_plural "All files are links and do not have permissions."
msgstr[0] ""
msgstr[1] ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:1873
#, kde-format
msgid "Only the owner can change permissions."
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:1877
#, kde-format
msgid "O&wner:"
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:1884
#, kde-format
msgid "Specifies the actions that the owner is allowed to do."
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:1886
#, kde-format
msgid "Gro&up:"
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:1893
#, kde-format
msgid "Specifies the actions that the members of the group are allowed to do."
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:1895
#, kde-format
msgid "O&thers:"
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:1902
#, kde-format
msgid "Specifies the actions that all users, who are neither owner nor in the group, are allowed to do."
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:1907
#, kde-format
msgid "Only own&er can rename and delete folder content"
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:1908
#, kde-format
msgid "Is &executable"
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:1912
#, kde-format
msgid "Enable this option to allow only the folder's owner to delete or rename the contained files and folders. Other users can only add new files, which requires the 'Modify Content' permission."
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:1916
#, kde-format
msgid "Enable this option to mark the file as executable. This only makes sense for programs and scripts. It is required when you want to execute them."
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:1923
#, kde-format
msgid "A&dvanced Permissions"
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:1932
#, kde-format
msgid "Ownership"
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:1939
#, kde-format
msgid "User:"
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:1982
#, kde-format
msgid "Group:"
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2019
#, kde-format
msgid "Apply changes to all subfolders and their contents"
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2061
#, kde-format
msgid "Advanced Permissions"
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2078
#, kde-format
msgid "Class"
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2085
#, kde-format
msgid ""
"Show\n"
"Entries"
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2086
#, kde-format
msgid "This flag allows viewing the content of the folder."
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2088
#, kde-format
msgid "Read"
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2089
#, kde-format
msgid "The Read flag allows viewing the content of the file."
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2095
#, kde-format
msgid ""
"Write\n"
"Entries"
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2096
#, kde-format
msgid "This flag allows adding, renaming and deleting of files. Note that deleting and renaming can be limited using the Sticky flag."
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2099
#, kde-format
msgid "Write"
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2100
#, kde-format
msgid "The Write flag allows modifying the content of the file."
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2106
#, kde-format
msgctxt "Enter folder"
msgid "Enter"
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2107
#, kde-format
msgid "Enable this flag to allow entering the folder."
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2109
#, kde-format
msgid "Exec"
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2110
#, kde-format
msgid "Enable this flag to allow executing the file as a program."
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2118
#, kde-format
msgid "Special"
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2122
#, kde-format
msgid "Special flag. Valid for the whole folder, the exact meaning of the flag can be seen in the right hand column."
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2125
#, kde-format
msgid "Special flag. The exact meaning of the flag can be seen in the right hand column."
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2129
#, kde-format
msgid "User"
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2133
#, kde-format
msgid "Group"
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2143
#, kde-format
msgid "If this flag is set, the owner of this folder will be the owner of all new files."
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2146
#, kde-format
msgid "If this file is an executable and the flag is set, it will be executed with the permissions of the owner."
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2151
#, kde-format
msgid "If this flag is set, the group of this folder will be set for all new files."
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2154
#, kde-format
msgid "If this file is an executable and the flag is set, it will be executed with the permissions of the group."
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2159
#, kde-format
msgid "If the Sticky flag is set on a folder, only the owner and root can delete or rename files. Otherwise everybody with write permissions can do this."
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2163
#, kde-format
msgid "The Sticky flag on a file is ignored on Linux, but may be used on some systems"
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2228
#, kde-format
msgid "Set UID"
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2232
#, kde-format
msgid "Set GID"
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2236
#, kde-format
msgctxt "File permission"
msgid "Sticky"
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2356
#, kde-format
msgid "Link"
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2375
#, kde-format
msgid "Varying (No Change)"
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2488
#, kde-format
msgid "This file uses advanced permissions"
msgid_plural "These files use advanced permissions."
msgstr[0] ""
msgstr[1] ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2509
#, kde-format
msgid "This folder uses advanced permissions."
msgid_plural "These folders use advanced permissions."
-"<p>Here you can install new GTK themes. Even more are available at <a href=\"http://gnome-look.org\"><span style=\" text-decoration: underline;\">gnome-look.org</span></a></p>"
msgid "Here you can configure your default file manager. The entries in the K menu and all KDE applications in which you can open folders will use this file manager."
msgid "This service allows you to configure your default email client. All KDE applications which need access to an email client application should honor this setting."
msgid "This service allows you to configure your default terminal emulator. All KDE applications which invoke a terminal emulator application should honor this setting."
msgid "Sends anonymized usage information to KDE so we can better understand our users. For more information see https://kde.org/privacypolicy-apps.php."
msgstr ""
#. +> trunk5 stable5
-#: discover/qml/Feedback.qml:14
+#: discover/qml/Feedback.qml:15
#, kde-format
msgid "Submitting usage information..."
msgstr ""
#. +> trunk5 stable5
-#: discover/qml/Feedback.qml:14
+#: discover/qml/Feedback.qml:15
#, kde-format
msgid "Configure"
msgstr ""
#. +> trunk5 stable5
-#: discover/qml/Feedback.qml:18
+#: discover/qml/Feedback.qml:19
#, kde-format
msgid "Configure feedback..."
msgstr ""
#. +> trunk5 stable5
-#: discover/qml/Feedback.qml:47
+#: discover/qml/Feedback.qml:48
#, kde-format
msgid "You can help us improving this application by sharing statistics and participate in surveys."
msgid "This shortcut will activate the applet: it will give the keyboard focus to it, and if the applet has a popup (such as the start menu), the popup will be open."
msgid "Your battery has reached critical level. This notification triggers a countdown before doing the configured action, hence it is strongly advised to leave that on."
msgstr ""
#. +> trunk5 stable5 plasma5lts
#: powerdevil.notifyrc:580
msgctxt "Name"
msgid "Charge Complete"
msgstr ""
#. +> trunk5 stable5 plasma5lts
#: powerdevil.notifyrc:626
msgctxt "Comment"
msgid "The battery is fully charged"
msgstr ""
#. +> trunk5 stable5 plasma5lts
#: powerdevil.notifyrc:678
msgctxt "Name"
msgid "Peripheral Battery Low"
msgstr ""
#. +> trunk5 stable5 plasma5lts
#: powerdevil.notifyrc:720
msgctxt "Comment"
msgid "The battery in a connected device, such as mouse or keyboard, is low"
msgstr ""
#. +> trunk5 stable5 plasma5lts
#: powerdevil.notifyrc:768
msgctxt "Name"
msgid "AC adaptor plugged in"
msgstr ""
#. +> trunk5 stable5 plasma5lts
#: powerdevil.notifyrc:814
msgctxt "Comment"
msgid "The power adaptor has been plugged in"
msgstr ""
#. +> trunk5 stable5 plasma5lts
#: powerdevil.notifyrc:866
msgctxt "Name"
msgid "AC adaptor unplugged"
msgstr ""
#. +> plasma5lts
#: powerdevil.notifyrc:2
msgctxt "Name"
msgid "KDE Power Management System"
msgstr ""
#. +> plasma5lts
#: powerdevil.notifyrc:959
msgctxt "Name"
msgid "Internal Error"
msgstr ""
#. +> trunk5 stable5 plasma5lts
#: powerdevil.notifyrc:912
msgctxt "Comment"
msgid "The power adaptor has been unplugged"
msgstr ""
#. +> plasma5lts
#: powerdevil.notifyrc:1005
msgctxt "Comment"
msgid "The KDE Power Management System has triggered an internal error"
msgid "Draw the points starting with the highest frequency first."
msgstr ""
#. +> trunk5 stable5
#: data/effects/audiospectrum.xml:45
#, kde-format
msgid "Line Tension"
msgstr ""
#. +> trunk5 stable5
#: data/effects/audiospectrum.xml:46
#, kde-format
msgid "Affects the amount of curve in the line interpolating between points. 0.0 = a straight line between points. 100 = very curved lines between points. Values < 0 and > 100 will cause loops in the lines. Only applies to line graph type."
msgstr ""
#. +> trunk5 stable5
#: data/effects/audiospectrum.xml:49
#, kde-format
msgid "Points"
msgstr ""
#. +> trunk5 stable5
#: data/effects/audiospectrum.xml:50
#, kde-format
msgid "The number of bands to draw in the spectrum. Each band shows up as a data point in the graph."
msgstr ""
#. +> trunk5 stable5
#: data/effects/audiospectrum.xml:53
#, kde-format
msgid "Low Frequency"
msgstr ""
#. +> trunk5 stable5
#: data/effects/audiospectrum.xml:54
#, kde-format
msgid "The low end of the frequency range to be used for the graph."
msgstr ""
#. +> trunk5 stable5
#: data/effects/audiospectrum.xml:57
#, kde-format
msgid "High Frequency"
msgstr ""
#. +> trunk5 stable5
#: data/effects/audiospectrum.xml:58
#, kde-format
msgid "The high end of the frequency range to be used for the graph."
msgstr ""
#. +> trunk5 stable5
#: data/effects/audiospectrum.xml:61
#, kde-format
msgid "Level Threshold"
msgstr ""
#. +> trunk5 stable5
#: data/effects/audiospectrum.xml:62
#, kde-format
msgid "The minimum amplitude of sound that must occur within the frequency range to cause the value to be applied."
msgstr ""
#. +> trunk5 stable5
#: data/effects/audiospectrum.xml:65
#, kde-format
msgid "Window Size"
msgstr ""
#. +> trunk5 stable5
#: data/effects/audiospectrum.xml:66
#, kde-format
msgid "The number of samples that the FFT will be performed on. If window size is less than the number of samples in a frame, extra samples will be ignored. If window size is more than the number of samples in a frame, samples will be buffered from previous frames to fill the window. The buffering is performed as a sliding window so that the most recent samples are always transformed."
msgstr ""
#. +> trunk5 stable5
#: data/effects/audiowave.xml:3
#, kde-format
msgid "Audio Wave"
msgstr ""
#. +> trunk5 stable5
#: data/effects/audiowave.xml:4
#, kde-format
msgid "Display the audio waveform instead of the video"
" <full><![CDATA[This effect allows to do Light Painting (i.e. painting with light sources on a photo by keeping the shutter\n"
" opened for a while), but for video.]]></full>"
msgstr ""
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:10
#: data/effects/frei0r_lightgraffiti.xml:83
#, kde-format
msgid "Brightness Threshold"
msgstr ""
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:12
#: data/effects/frei0r_lightgraffiti.xml:85
#, kde-format
msgid ""
"<![CDATA[How bright (<code>R+G+B</code>) does a pixel need to be in order to be recognized as a light source?<br/>"
"\n"
" Increasing this threshold requires brighter light sources (i.e. more white or less color, respectively) but prevents some «false alarms» where semi-bright parts, e.g. hands where colors can change quite a lot compared to the background, are incorrectly recognized as light source.]]>"
msgstr ""
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:15
#: data/effects/frei0r_lightgraffiti.xml:88
#, kde-format
msgid "Difference Threshold"
msgstr ""
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:17
#: data/effects/frei0r_lightgraffiti.xml:90
#, kde-format
msgid ""
"<![CDATA[How much does the strongest color channel of a pixel have to change, compared to the background image (<code>max(dR, dG, dB)</code>), in order to be recognized as light source? <br/>"
"\n"
" Increasing this threshold makes it harder for light sources to be accepted on bright backgrounds, but decreases the danger of noise or generally bright spots counting as light source.]]>"
msgstr ""
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:20
#: data/effects/frei0r_lightgraffiti.xml:93
#, kde-format
msgid "Difference Sum Threshold"
msgstr ""
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:22
#: data/effects/frei0r_lightgraffiti.xml:95
#, kde-format
msgid ""
"<![CDATA[How much does the sum of all color channels <em>relative to the background image</em> (<code>dR + dG + dB</code>) have to change until a pixel is recognized as a light source?<br/>"
"\n"
" Raising this value might, in some cases, avoid that some light objects lit by the light source are added to the light mask.]]>"
msgstr ""
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:25
#: data/effects/frei0r_lightgraffiti.xml:98
#, kde-format
msgid "Sensitivity"
msgstr ""
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:27
#: data/effects/frei0r_lightgraffiti.xml:100
#, kde-format
msgid ""
"<![CDATA[Light sensitivity.<br/>"
"\n"
" For slowly moving light source try to use a lower sensitivity to obtain a better exposure.]]>"
msgstr ""
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:30
#: data/effects/frei0r_lightgraffiti.xml:103
#, kde-format
msgid "Lower Overexposure"
msgstr ""
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:32
#: data/effects/frei0r_lightgraffiti.xml:105
#, kde-format
msgid ""
"<![CDATA[Lowers overexposure.<br/>"
"\n"
" The light mask does not get white immediately when the light source is moving slowly or staying steady.]]>"
msgstr ""
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:35
#: data/effects/frei0r_lightgraffiti.xml:108
#, kde-format
msgid "Dimming"
msgstr ""
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:36
#: data/effects/frei0r_lightgraffiti.xml:109
#, kde-format
msgid "Dims the light mask. Lights will leave a fainting trail if it is set to a value > 0."
msgstr ""
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:39
#: data/effects/frei0r_lightgraffiti.xml:112
#, kde-format
msgid "Background Weight"
msgstr ""
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:40
#: data/effects/frei0r_lightgraffiti.xml:113
#, kde-format
msgid "Strength of the (calculated) background image. Setting it to 100 paints the light mask directly over the background, without the painting person in the image if the video starts with a «clean» background image. (See the α parameter.)"
msgstr ""
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:43
#: data/effects/frei0r_lightgraffiti.xml:116
#, kde-format
msgid "α"
msgstr ""
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:45
#: data/effects/frei0r_lightgraffiti.xml:118
#, kde-format
msgid ""
"<![CDATA[Determines how the effect tries to adapt to background changes. <br/>"
"\n"
" The Light Graffiti effect remembers the first frame of the clip it is applied to, so the clip should <em>always</em> start with the painter outside of the video. If the background constantly changes, e.g. on a street, try to set α > 0 to calculate an average background image.]]>"
msgstr ""
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:49
#: data/effects/frei0r_lightgraffiti.xml:122
#, kde-format
msgid "Increases the saturation of lights."
msgstr ""
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:52
#: data/effects/frei0r_lightgraffiti.xml:125
#, kde-format
msgid "Show brightness statistics"
msgstr ""
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:54
#: data/effects/frei0r_lightgraffiti.xml:127
#, kde-format
msgid ""
"<![CDATA[The stats switches allow easy and accurate adjustment of the threshold parameters.<br/>"
"\n"
" Example: To adjust the brightness threshold, check this box and adjust the threshold until the whole light source is highlighted. Repeat the same with the other parameters. Only parts that are highlighted in <em>all</em> thresholds will count as light source.]]>"
msgstr ""
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:57
#: data/effects/frei0r_lightgraffiti.xml:130
#, kde-format
msgid "Show background difference statistics"
msgstr ""
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:60
#: data/effects/frei0r_lightgraffiti.xml:133
#, kde-format
msgid "Show background difference sum statistics"
msgstr ""
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:64
#: data/effects/frei0r_lightgraffiti.xml:137
#, kde-format
msgid "Makes the background transparent, allowing to apply a composite effect and paint the light mask over a completely different video."
msgstr ""
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:67
#: data/effects/frei0r_lightgraffiti.xml:140
#, kde-format
msgid "Nonlinear dimming"
msgstr ""
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:68
#: data/effects/frei0r_lightgraffiti.xml:141
#, kde-format
msgid "If normal dimming does not look natural enough, try this one."
msgid "Resets the light mask and the background image. This is necessary e.g. if you apply this effect to a clip in the timeline and then move the timeline cursor from outside of the clip to the middle of it. The effect receives this frame in the middle as first frame and uses it as background image. For proper threshold adjusting move the timeline cursor to the beginning of the clip, check the Reset box and uncheck it again."
"<![CDATA[Changing the slope means multiplying the pixel value with a constant value. Black pixels will remain black, whileas brighter ones will be changed.<br/>"
"\n"
" All effects can be observed well when applied on a greyscale gradient and looking at the RGB Parade monitor.]]>"
" is on a removable device, will not be available when device is unplugged or mounted at a different position. You may want to copy it first to your hard-drive. Would you like to add it anyways?"
msgid "%1 missing source clips, you can only use the proxies"
msgstr ""
#. +> trunk5 stable5
#: src/doc/documentchecker.cpp:619
#, kde-format
msgid "Missing source clip"
msgstr ""
#. +> trunk5 stable5
#: src/doc/documentchecker.cpp:717
#, kde-format
msgid "Clips folder"
msgstr ""
#. +> trunk5 stable5
#: src/doc/documentchecker.cpp:909
#, kde-format
msgid "Enter new location for file"
msgstr ""
#. +> trunk5 stable5
#: src/doc/documentchecker.cpp:1183
#, kde-format
msgid "This will remove the selected clip from this project"
msgid_plural "This will remove the selected clips from this project"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: src/doc/documentchecker.cpp:1185
#, kde-format
msgid "Remove clips"
msgstr ""
#. +> trunk5 stable5
#: src/doc/documentvalidator.cpp:145
#, kde-format
msgid "The document was created in \"%1\" locale, which is not installed on your system. Please install that language pack. Until then, Kdenlive might not be able to correctly open the document."
msgstr ""
#. +> trunk5 stable5
#: src/doc/documentvalidator.cpp:158
#, kde-format
msgid "There is a locale conflict on your system. The document uses locale %1 which uses a \"%2\" as numeric separator (in system libraries) but Qt expects \"%3\". You might not be able to correctly open the project."
msgstr ""
#. +> trunk5 stable5
#: src/doc/documentvalidator.cpp:184
#, kde-format
msgid "There is a locale conflict. The document uses a \"%1\" as numeric separator, but your computer is configured to use \"%2\". Change your computer settings or you might not be able to correctly open the project."
msgstr ""
#. +> trunk5 stable5
#: src/doc/documentvalidator.cpp:365
#, kde-format
msgid ""
"This project type is unsupported (version %1) and cannot be loaded.\n"
"Please consider upgrading your Kdenlive version."
msgid "This project type is unsupported (version %1) and cannot be loaded."
msgstr ""
#. +> trunk5 stable5
#: src/doc/documentvalidator.cpp:944
#, kde-format
msgid "Some of your text clips were saved with size in points, which means different sizes on different displays. Do you want to convert them to pixel size, making them portable? It is recommended you do this on the computer they were first created on, or you could have to adjust their size."
msgstr ""
#. +> trunk5 stable5
#: src/doc/documentvalidator.cpp:947
#, kde-format
msgid "Update Text Clips"
msgstr ""
#. +> trunk5 stable5
#: src/doc/documentvalidator.cpp:1820
#, kde-format
msgid "extra audio"
msgstr ""
#. +> trunk5 stable5
#: src/doc/documentvalidator.cpp:2116
#, kde-format
msgid ""
"The project file uses some GPU effects. GPU acceleration is not currently enabled.\n"
"Do you want to convert the project to a non-GPU version?\n"
"This might result in data loss."
msgstr ""
#. +> trunk5 stable5
#: src/doc/documentvalidator.cpp:2208
#, kde-format
msgid "The following filters/transitions were converted to non GPU versions:"
msgstr ""
#. +> trunk5 stable5
#: src/doc/documentvalidator.cpp:2211
#, kde-format
msgid "The following filters/transitions were deleted from the project:"
msgid "You have changed the proxy parameters. Do you want to recreate all proxy clips for this project?"
msgstr ""
#. +> trunk5 stable5
-#: src/mainwindow.cpp:1757
+#: src/mainwindow.cpp:1758
#, kde-format
msgid "The current project has not been saved. This will first save the project, then move all temporary files from <b>%1</b> to <b>%2</b>, and the project file will be reloaded"
msgstr ""
#. +> trunk5 stable5
-#: src/mainwindow.cpp:1765
+#: src/mainwindow.cpp:1766
#, kde-format
msgid "This will move all temporary files from <b>%1</b> to <b>%2</b>, the project file will then be reloaded"
msgid "Enter your freesound account details to download the highest quality version of this file. Or use the High Quality preview file instead (no freesound account required)."
msgstr ""
#. +> trunk5 stable5
#: src/scopes/abstractscopewidget.cpp:70
#, kde-format
msgid "Auto Refresh"
msgstr ""
#. +> trunk5 stable5
#: src/scopes/abstractscopewidget.cpp:72
#, kde-format
msgid "Realtime (with precision loss)"
msgstr ""
#. +> trunk5 stable5
#: src/scopes/audioscopes/audiospectrum.cpp:60
#: src/scopes/audioscopes/spectrogram.cpp:47
#, kde-format
msgid "Reset maximum frequency to sampling rate"
msgstr ""
#. +> trunk5 stable5
#: src/scopes/audioscopes/audiospectrum.cpp:61
#: src/scopes/audioscopes/spectrogram.cpp:50
#, kde-format
msgid "Track mouse"
msgstr ""
#. +> trunk5 stable5
#: src/scopes/audioscopes/audiospectrum.cpp:63
#, kde-format
msgid "Show maximum"
msgstr ""
#. +> trunk5 stable5
#: src/scopes/audioscopes/audiospectrum.cpp:77
#: src/scopes/audioscopes/spectrogram.cpp:67
#, kde-format
msgid "Rectangular window"
msgstr ""
#. +> trunk5 stable5
#: src/scopes/audioscopes/audiospectrum.cpp:78
#: src/scopes/audioscopes/spectrogram.cpp:68
#, kde-format
msgid "Triangular window"
msgstr ""
#. +> trunk5 stable5
#: src/scopes/audioscopes/audiospectrum.cpp:79
#: src/scopes/audioscopes/spectrogram.cpp:69
#, kde-format
msgid "Hamming window"
msgstr ""
#. +> trunk5 stable5
#: src/scopes/audioscopes/audiospectrum.cpp:86
#: src/scopes/audioscopes/spectrogram.cpp:72
#, kde-format
msgid "The maximum window size is limited by the number of samples per frame."
msgstr ""
#. +> trunk5 stable5
#: src/scopes/audioscopes/audiospectrum.cpp:87
#: src/scopes/audioscopes/spectrogram.cpp:73
#, kde-format
msgid "A bigger window improves the accuracy at the cost of computational power."
msgstr ""
#. +> trunk5 stable5
#: src/scopes/audioscopes/audiospectrum.cpp:88
#: src/scopes/audioscopes/spectrogram.cpp:74
#, kde-format
msgid "The rectangular window function is good for signals with equal signal strength (narrow peak), but creates more smearing. See Window function on Wikipedia."
msgid "This title clip was created with a different frame size."
msgstr ""
#. +> trunk5 stable5
#: src/titler/titledocument.cpp:378
#, kde-format
msgid "Title Profile"
msgstr ""
#. +> trunk5 stable5
#: src/titler/titledocument.cpp:430
#, kde-format
msgid "Some of your text clips were saved with size in points, which means different sizes on different displays. They will be converted to pixel size, making them portable, but you could have to adjust their size."
msgid "Information about unicode characters: <a href=\"https://decodeunicode.org\">https://decodeunicode.org</a>"
msgstr ""
#. +> stable5
#: src/titler/unicodedialog.cpp:78
#, kde-format
msgid "Information about unicode characters: <a href=\"http://decodeunicode.org\">http://decodeunicode.org</a>"
msgstr ""
#. +> trunk5 stable5
#: src/titler/unicodedialog.cpp:79
#, kde-format
msgid "Previous Unicode character (Arrow Up)"
msgstr ""
#. +> trunk5 stable5
#: src/titler/unicodedialog.cpp:80
#, kde-format
msgid "Next Unicode character (Arrow Down)"
msgstr ""
#. +> trunk5 stable5
#: src/titler/unicodedialog.cpp:81
#, kde-format
msgid "Enter your Unicode number here. Allowed characters: [0-9] and [a-f]."
msgstr ""
#. +> trunk5 stable5
#: src/titler/unicodedialog.cpp:137
#, kde-format
msgid "<small>(no character selected)</small>"
msgstr ""
#. +> trunk5
#: src/titler/unicodedialog.cpp:146
#, kde-format
msgid "Control character. Cannot be inserted/printed. See <a href=\"https://en.wikipedia.org/wiki/Control_character\">Wikipedia:Control_character</a>"
msgstr ""
#. +> stable5
#: src/titler/unicodedialog.cpp:146
#, kde-format
msgid "Control character. Cannot be inserted/printed. See <a href=\"http://en.wikipedia.org/wiki/Control_character\">Wikipedia:Control_character</a>"
msgstr ""
#. +> trunk5 stable5
#: src/titler/unicodedialog.cpp:148
#, kde-format
msgid "Line Feed (newline character, \\\\n)"
msgstr ""
#. +> trunk5 stable5
#: src/titler/unicodedialog.cpp:150
#, kde-format
msgid "Standard space character. (Other space characters: U+00a0, U+2000–200b, U+202f)"
msgstr ""
#. +> trunk5 stable5
#: src/titler/unicodedialog.cpp:152
#, kde-format
msgid "No-break space. &nbsp; in HTML. See U+2009 and U+0020."
msgstr ""
#. +> trunk5
#: src/titler/unicodedialog.cpp:155
#, kde-format
msgid ""
"<p><strong>«</strong> (u+00ab, <code>&lfquo;</code> in HTML) and <strong>»</strong> (u+00bb, <code>&rfquo;</code> in HTML) are called Guillemets or angle quotes. Usage in different countries: France (with non-breaking Space 0x00a0), Switzerland, Germany, Finland and Sweden.</p>"
"<p><strong>‹</strong> and <strong>›</strong> (U+2039/203a, <code>&lsaquo;/&rsaquo;</code>) are their single quote equivalents.</p>"
"<p><strong>«</strong> (u+00ab, <code>&lfquo;</code> in HTML) and <strong>»</strong> (u+00bb, <code>&rfquo;</code> in HTML) are called Guillemets or angle quotes. Usage in different countries: France (with non-breaking Space 0x00a0), Switzerland, Germany, Finland and Sweden.</p>"
"<p><strong>‹</strong> and <strong>›</strong> (U+2039/203a, <code>&lsaquo;/&rsaquo;</code>) are their single quote equivalents.</p>"
msgid "Three-Per-Em Space. Width: 1/3 of one <em>em</em>"
msgstr ""
#. +> trunk5 stable5
#: src/titler/unicodedialog.cpp:166
#, kde-format
msgid "Four-Per-Em Space. Width: 1/4 of one <em>em</em>"
msgstr ""
#. +> trunk5 stable5
#: src/titler/unicodedialog.cpp:168
#, kde-format
msgid "Six-Per-Em Space. Width: 1/6 of one <em>em</em>"
msgstr ""
#. +> trunk5 stable5
#: src/titler/unicodedialog.cpp:170
#, kde-format
msgid "Figure space (non-breaking). Width of a digit if digits have fixed width in this font."
msgstr ""
#. +> trunk5 stable5
#: src/titler/unicodedialog.cpp:172
#, kde-format
msgid "Punctuation Space. Width the same as between a punctuation character and the next character."
msgstr ""
#. +> trunk5
#: src/titler/unicodedialog.cpp:174
#, kde-format
msgid "Thin space, in HTML also &thinsp;. See U+202f and <a href=\"https://en.wikipedia.org/wiki/Space_(punctuation)\">Wikipedia:Space_(punctuation)</a>"
msgstr ""
#. +> stable5
#: src/titler/unicodedialog.cpp:174
#, kde-format
msgid "Thin space, in HTML also &thinsp;. See U+202f and <a href=\"http://en.wikipedia.org/wiki/Space_(punctuation)\">Wikipedia:Space_(punctuation)</a>"
msgstr ""
#. +> trunk5 stable5
#: src/titler/unicodedialog.cpp:177
#, kde-format
msgid "Hair Space. Thinner than U+2009."
msgstr ""
#. +> trunk5
#: src/titler/unicodedialog.cpp:180
#, kde-format
msgid "Punctuation Apostrophe. Should be used instead of U+0027. See <a href=\"https://en.wikipedia.org/wiki/Apostrophe\">Wikipedia:Apostrophe</a>"
msgstr ""
#. +> stable5
#: src/titler/unicodedialog.cpp:180
#, kde-format
msgid "Punctuation Apostrophe. Should be used instead of U+0027. See <a href=\"http://en.wikipedia.org/wiki/Apostrophe\">Wikipedia:Apostrophe</a>"
msgstr ""
#. +> trunk5
#: src/titler/unicodedialog.cpp:182
#, kde-format
msgid ""
"<p>An en Dash (dash of the width of an n).</p>"
"<p>Usage examples: In English language for value ranges (1878–1903), for relationships/connections (Zurich–Dublin). In the German language it is also used (with spaces!) for showing thoughts: “Es war – wie immer in den Ferien – ein regnerischer Tag.</p>"
"<p>Usage examples: In English language for value ranges (1878–1903), for relationships/connections (Zurich–Dublin). In the German language it is also used (with spaces!) for showing thoughts: “Es war – wie immer in den Ferien – ein regnerischer Tag.</p>"
"<p>Narrow no-break space. Has the same width as U+2009.</p>"
"<p>Usage: For units (spaces are marked with U+2423, ␣): 230␣V, −21␣°C, 50␣lb, <em>but</em> 90° (no space). In German for abbreviations (like: i. d. R. instead of i. d. R. with U+00a0).</p>"
"<p>Narrow no-break space. Has the same width as U+2009.</p>"
"<p>Usage: For units (spaces are marked with U+2423, ␣): 230␣V, −21␣°C, 50␣lb, <em>but</em> 90° (no space). In German for abbreviations (like: i. d. R. instead of i. d. R. with U+00a0).</p>"
msgid "Ellipsis: If text has been left o… See <a href=\"https://en.wikipedia.org/wiki/Ellipsis\">Wikipedia:Ellipsis</a>"
msgstr ""
#. +> stable5
#: src/titler/unicodedialog.cpp:195
#, kde-format
msgid "Ellipsis: If text has been left o… See <a href=\"http://en.wikipedia.org/wiki/Ellipsis\">Wikipedia:Ellipsis</a>"
msgstr ""
#. +> trunk5 stable5
#: src/titler/unicodedialog.cpp:197
#, kde-format
msgid "Minus sign. For numbers: −42"
msgstr ""
#. +> trunk5 stable5
#: src/titler/unicodedialog.cpp:199
#, kde-format
msgid "Open box; stands for a space."
msgstr ""
#. +> trunk5
#: src/titler/unicodedialog.cpp:201
#, kde-format
msgid "Quarter note (Am.) or crochet (Brit.). See <a href=\"https://en.wikipedia.org/wiki/Quarter_note\">Wikipedia:Quarter_note</a>"
msgstr ""
#. +> stable5
#: src/titler/unicodedialog.cpp:201
#, kde-format
msgid "Quarter note (Am.) or crochet (Brit.). See <a href=\"http://en.wikipedia.org/wiki/Quarter_note\">Wikipedia:Quarter_note</a>"
msgstr ""
#. +> trunk5
#: src/titler/unicodedialog.cpp:203
#, kde-format
msgid "Eighth note (Am.) or quaver (Brit.). Half as long as a quarter note (U+2669). See <a href=\"https://en.wikipedia.org/wiki/Eighth_note\">Wikipedia:Eighth_note</a>"
msgstr ""
#. +> stable5
#: src/titler/unicodedialog.cpp:203
#, kde-format
msgid "Eighth note (Am.) or quaver (Brit.). Half as long as a quarter note (U+2669). See <a href=\"http://en.wikipedia.org/wiki/Eighth_note\">Wikipedia:Eighth_note</a>"
msgstr ""
#. +> trunk5
#: src/titler/unicodedialog.cpp:206
#, kde-format
msgid "Sixteenth note (Am.) or semiquaver (Brit.). Half as long as an eighth note (U+266a). See <a href=\"https://en.wikipedia.org/wiki/Sixteenth_note\">Wikipedia:Sixteenth_note</a>"
msgstr ""
#. +> stable5
#: src/titler/unicodedialog.cpp:206
#, kde-format
msgid "Sixteenth note (Am.) or semiquaver (Brit.). Half as long as an eighth note (U+266a). See <a href=\"http://en.wikipedia.org/wiki/Sixteenth_note\">Wikipedia:Sixteenth_note</a>"
msgstr ""
#. +> trunk5
#: src/titler/unicodedialog.cpp:209
#, kde-format
msgid "Thirty-second note (Am.) or demisemiquaver (Brit.). Half as long as a sixteenth note (U+266b). See <a href=\"https://en.wikipedia.org/wiki/Thirty-second_note\">Wikipedia:Thirty-second_note</a>"
msgstr ""
#. +> stable5
#: src/titler/unicodedialog.cpp:209
#, kde-format
msgid "Thirty-second note (Am.) or demisemiquaver (Brit.). Half as long as a sixteenth note (U+266b). See <a href=\"http://en.wikipedia.org/wiki/Thirty-second_note\">Wikipedia:Thirty-second_note</a>"
msgstr ""
#. +> trunk5 stable5
#: src/titler/unicodedialog.cpp:212
#, kde-format
msgid "<small>No additional information available for this character.</small>"
msgstr ""
#. +> trunk5 stable5
#: src/transitions/transitionsrepository.cpp:46
#, kde-format
msgid "Some of your favorite compositions are invalid and were removed: %1"
"<p>Enter your freesound account details to download the highest quality version of this file. Or use the High Quality preview file instead (no freesound account required).</p>"
"HQ preview files are all mp3 files. We have added .mp3 as a file extension to the destination file name you chose. However, there is an existing file of this name present.\n"
msgid "Try importing again to obtain a new freesound connection"
msgstr ""
#. +> trunk5 stable5
#: src/utils/resourcewidget.cpp:796
#, kde-format
msgid "Do you want to overwrite the existing file?"
msgstr ""
#. +> trunk5 stable5
#: src/utils/resourcewidget.cpp:840
#, kde-format
msgid "Saved file to"
msgstr ""
#. +> trunk5 stable5
#: src/utils/resourcewidget.cpp:847
#, kde-format
msgid "Error Saving File"
msgstr ""
#. +> trunk5 stable5
#: src/utils/resourcewidget.cpp:860
#, kde-format
msgid "Error Downloading File. Error code: %1"
msgstr ""
#. +> trunk5 stable5
#: src/utils/thememanager.cpp:75
#, kde-format
msgid "&Color Theme"
msgstr ""
#. +> trunk5 stable5
#: src/widgets/colorpickerwidget.cpp:67
#, kde-format
msgid "Pick a color on the screen. By pressing the mouse button and then moving your mouse you can select a section of the screen from which to get an average color."
"<p>Enables traditional username/password authentication against the Exchange server. This includes methods like Basic, NTLM or Kerberos.</p>"
"<p>This authentication method is considered to be somewhat legacy and is mostly used for smaller on-premise Exchange installations and hosted Office 365 instances, where the administrator has chosen to enable it.</p>"
"<p>Allows to specify an Active Directory domain for the user.</p>"
"<p><span style=\" font-weight:600;\">Note:</span> There is a subtle difference between \"empty domain\" and \"no-domain\".</p>"
"<p>With an empty domain (Domain checkbox checked, empty domain in edit box) the EWS resource will pass the user with an explicitly empty domain (\"\\username\").</p>"
"<p>With no domain set (Domain checkbox cleared) the username will be passed without the domain (\"username\"), which will cause the server to set the domain to the default one its configured with.</p>"
"<p><span style=\" font-weight:600;\">Note:</span> Username and password are not needed (can be empty) when Kerberos is properly configured on your system.</p>"
"<p>Enables more modern and stronger authentication based on OAuth2.</p>"
"<p>This type of authentication will open an organization-supplied webpage, where the user will be able to enter authentication information, which may also include multifactor authentication in form of one-time-passwords generated by tokens.</p>"
"<p>This method is mostly used for hosted Office 365 instances.</p>"
"<p>Private Key (PKey) Authentication is used as an additional authentication step to OAuth2-based authentication. It uses an X.509 certificate and private key that identifies a trusted device, which was joined to the Azure Directory using a Workplace Join.</p>"
"<p>Some administrators may mandate use of PKey authentication when connecting to Office 365 from outside of corporate network. In other cases, when multi-factor authentication is set-up, using the PKey authentication can satisfy requirements for strong authentication, in which case entering the MFA code is not required.</p>"
"<p>Streaming notifications behave similarly to push mode - a connection is kept alive and notifications about item changes are delivered instantly.</p>"
"<p><br/>"
"</p>"
"<p>This option requires Exchange server version 2010 SP1 or later.</p>"
"<p>By default KDE uses the less secure NTLMv1 authentication. Enabling this will cause the more secure NTLMv2 protocol to be used.</p>"
"<p>Some newer Microsoft Exchange servers are configured to only allow NTLMv2 authentication. In such case this option must be enabled in order to connect successfully.</p>"
"<p>Some organizations restrict access to mail only to approved clients, such as Microsoft Outlook. On the server-side this is implemented by analyzing the User-Agent string and only allowing a list of approved clients.</p>"
"<p>This setting allows to emulate some well known clients as well as providing a custom User-Agent string.</p>"
"<p>Please be advised that bypasing company policies may result in personal consequences.</p>"
"There are conflicting encryption preferences for these recipients.\n"
"Encrypt this message?"
msgstr ""
#. +> trunk5 stable5
#: composer/composerviewbase.cpp:2011
#, kde-format
msgid "Do &Not Encrypt"
msgstr ""
#. +> trunk5 stable5
#: composer/composerviewbase.cpp:2033
#, kde-format
msgid "You have requested to encrypt this message, and to encrypt a copy to yourself, but no valid trusted encryption keys have been configured for this identity."
msgid "One or more of your configured OpenPGP encryption keys or S/MIME certificates is not fully trusted for encryption."
msgstr ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:343
#, kde-format
msgid "One or more of the OpenPGP encryption keys or S/MIME certificates for recipient \"%1\" is not fully trusted for encryption."
msgstr ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:349
#, kde-format
msgid ""
"\n"
"The following keys are only marginally trusted: \n"
msgstr ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:353
#, kde-format
msgid ""
"\n"
"The following keys or certificates have unknown trust level: \n"
msgstr ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:357
#, kde-format
msgid ""
"\n"
"The following keys or certificates are <b>revoked</b>: \n"
msgstr ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:361
#, kde-format
msgid "Not Fully Trusted Encryption Keys"
msgstr ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:692
#, kde-format
msgid ""
"<p>Your OpenPGP signing key</p>"
"<p align=center><b>%2</b> (KeyID 0x%3)</p>"
"<p>expired less than a day ago.</p>"
msgid_plural ""
"<p>Your OpenPGP signing key</p>"
"<p align=center><b>%2</b> (KeyID 0x%3)</p>"
"<p>expired %1 days ago.</p>"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:696
#, kde-format
msgid ""
"<p>Your OpenPGP encryption key</p>"
"<p align=center><b>%2</b> (KeyID 0x%3)</p>"
"<p>expired less than a day ago.</p>"
msgid_plural ""
"<p>Your OpenPGP encryption key</p>"
"<p align=center><b>%2</b> (KeyID 0x%3)</p>"
"<p>expired %1 days ago.</p>"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:700
#, kde-format
msgid ""
"<p>The OpenPGP key for</p>"
"<p align=center><b>%2</b> (KeyID 0x%3)</p>"
"<p>expired less than a day ago.</p>"
msgid_plural ""
"<p>The OpenPGP key for</p>"
"<p align=center><b>%2</b> (KeyID 0x%3)</p>"
"<p>expired %1 days ago.</p>"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:711
#, kde-format
msgid ""
"<p>The root certificate</p>"
"<p align=center><b>%4</b></p>"
"<p>for your S/MIME signing certificate</p>"
"<p align=center><b>%2</b> (serial number %3)</p>"
"<p>expired less than a day ago.</p>"
msgid_plural ""
"<p>The root certificate</p>"
"<p align=center><b>%4</b></p>"
"<p>for your S/MIME signing certificate</p>"
"<p align=center><b>%2</b> (serial number %3)</p>"
"<p>expired %1 days ago.</p>"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:717
#, kde-format
msgid ""
"<p>The root certificate</p>"
"<p align=center><b>%4</b></p>"
"<p>for your S/MIME encryption certificate</p>"
"<p align=center><b>%2</b> (serial number %3)</p>"
"<p>expired less than a day ago.</p>"
msgid_plural ""
"<p>The root certificate</p>"
"<p align=center><b>%4</b></p>"
"<p>for your S/MIME encryption certificate</p>"
"<p align=center><b>%2</b> (serial number %3)</p>"
"<p>expired %1 days ago.</p>"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:723
#, kde-format
msgid ""
"<p>The root certificate</p>"
"<p align=center><b>%4</b></p>"
"<p>for S/MIME certificate</p>"
"<p align=center><b>%2</b> (serial number %3)</p>"
"<p>expired less than a day ago.</p>"
msgid_plural ""
"<p>The root certificate</p>"
"<p align=center><b>%4</b></p>"
"<p>for S/MIME certificate</p>"
"<p align=center><b>%2</b> (serial number %3)</p>"
"<p>expired %1 days ago.</p>"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:730
#, kde-format
msgid ""
"<p>The intermediate CA certificate</p>"
"<p align=center><b>%4</b></p>"
"<p>for your S/MIME signing certificate</p>"
"<p align=center><b>%2</b> (serial number %3)</p>"
"<p>expired less than a day ago.</p>"
msgid_plural ""
"<p>The intermediate CA certificate</p>"
"<p align=center><b>%4</b></p>"
"<p>for your S/MIME signing certificate</p>"
"<p align=center><b>%2</b> (serial number %3)</p>"
"<p>expired %1 days ago.</p>"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:736
#, kde-format
msgid ""
"<p>The intermediate CA certificate</p>"
"<p align=center><b>%4</b></p>"
"<p>for your S/MIME encryption certificate</p>"
"<p align=center><b>%2</b> (serial number %3)</p>"
"<p>expired less than a day ago.</p>"
msgid_plural ""
"<p>The intermediate CA certificate</p>"
"<p align=center><b>%4</b></p>"
"<p>for your S/MIME encryption certificate</p>"
"<p align=center><b>%2</b> (serial number %3)</p>"
"<p>expired %1 days ago.</p>"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:742
#, kde-format
msgid ""
"<p>The intermediate CA certificate</p>"
"<p align=center><b>%4</b></p>"
"<p>for S/MIME certificate</p>"
"<p align=center><b>%2</b> (serial number %3)</p>"
"<p>expired less than a day ago.</p>"
msgid_plural ""
"<p>The intermediate CA certificate</p>"
"<p align=center><b>%4</b></p>"
"<p>for S/MIME certificate</p>"
"<p align=center><b>%2</b> (serial number %3)</p>"
"<p>expired %1 days ago.</p>"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:754
#, kde-format
msgid ""
"<p>Your S/MIME signing certificate</p>"
"<p align=center><b>%2</b> (serial number %3)</p>"
"<p>expired less than a day ago.</p>"
msgid_plural ""
"<p>Your S/MIME signing certificate</p>"
"<p align=center><b>%2</b> (serial number %3)</p>"
"<p>expired %1 days ago.</p>"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:758
#, kde-format
msgid ""
"<p>Your S/MIME encryption certificate</p>"
"<p align=center><b>%2</b> (serial number %3)</p>"
"<p>expired less than a day ago.</p>"
msgid_plural ""
"<p>Your S/MIME encryption certificate</p>"
"<p align=center><b>%2</b> (serial number %3)</p>"
"<p>expired %1 days ago.</p>"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:762
#, kde-format
msgid ""
"<p>The S/MIME certificate for</p>"
"<p align=center><b>%2</b> (serial number %3)</p>"
"<p>expired less than a day ago.</p>"
msgid_plural ""
"<p>The S/MIME certificate for</p>"
"<p align=center><b>%2</b> (serial number %3)</p>"
"<p>expired %1 days ago.</p>"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:773
#, kde-format
msgid "OpenPGP Key Expired"
msgstr ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:774
#, kde-format
msgid "S/MIME Certificate Expired"
msgstr ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:798
#, kde-format
msgid ""
"<p>Your OpenPGP signing key</p>"
"<p align=\"center\"><b>%2</b> (KeyID 0x%3)</p>"
"<p>expires in less than a day.</p>"
msgid_plural ""
"<p>Your OpenPGP signing key</p>"
"<p align=\"center\"><b>%2</b> (KeyID 0x%3)</p>"
"<p>expires in less than %1 days.</p>"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:802
#, kde-format
msgid ""
"<p>Your OpenPGP encryption key</p>"
"<p align=\"center\"><b>%2</b> (KeyID 0x%3)</p>"
"<p>expires in less than a day.</p>"
msgid_plural ""
"<p>Your OpenPGP encryption key</p>"
"<p align=\"center\"><b>%2</b> (KeyID 0x%3)</p>"
"<p>expires in less than %1 days.</p>"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:806
#, kde-format
msgid ""
"<p>The OpenPGP key for</p>"
"<p align=\"center\"><b>%2</b> (KeyID 0x%3)</p>"
"<p>expires in less than a day.</p>"
msgid_plural ""
"<p>The OpenPGP key for</p>"
"<p align=\"center\"><b>%2</b> (KeyID 0x%3)</p>"
"<p>expires in less than %1 days.</p>"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:817
#, kde-format
msgid ""
"<p>The root certificate</p>"
"<p align=\"center\"><b>%4</b></p>"
"<p>for your S/MIME signing certificate</p>"
"<p align=\"center\"><b>%2</b> (serial number %3)</p>"
"<p>expires in less than a day.</p>"
msgid_plural ""
"<p>The root certificate</p>"
"<p align=\"center\"><b>%4</b></p>"
"<p>for your S/MIME signing certificate</p>"
"<p align=\"center\"><b>%2</b> (serial number %3)</p>"
"<p>expires in less than %1 days.</p>"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:823
#, kde-format
msgid ""
"<p>The root certificate</p>"
"<p align=\"center\"><b>%4</b></p>"
"<p>for your S/MIME encryption certificate</p>"
"<p align=\"center\"><b>%2</b> (serial number %3)</p>"
"<p>expires in less than a day.</p>"
msgid_plural ""
"<p>The root certificate</p>"
"<p align=\"center\"><b>%4</b></p>"
"<p>for your S/MIME encryption certificate</p>"
"<p align=\"center\"><b>%2</b> (serial number %3)</p>"
"<p>expires in less than %1 days.</p>"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:829
#, kde-format
msgid ""
"<p>The root certificate</p>"
"<p align=\"center\"><b>%4</b></p>"
"<p>for S/MIME certificate</p>"
"<p align=\"center\"><b>%2</b> (serial number %3)</p>"
"<p>expires in less than a day.</p>"
msgid_plural ""
"<p>The root certificate</p>"
"<p align=\"center\"><b>%4</b></p>"
"<p>for S/MIME certificate</p>"
"<p align=\"center\"><b>%2</b> (serial number %3)</p>"
"<p>expires in less than %1 days.</p>"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:836
#, kde-format
msgid ""
"<p>The intermediate CA certificate</p>"
"<p align=\"center\"><b>%4</b></p>"
"<p>for your S/MIME signing certificate</p>"
"<p align=\"center\"><b>%2</b> (serial number %3)</p>"
"<p>expires in less than a day.</p>"
msgid_plural ""
"<p>The intermediate CA certificate</p>"
"<p align=\"center\"><b>%4</b></p>"
"<p>for your S/MIME signing certificate</p>"
"<p align=\"center\"><b>%2</b> (serial number %3)</p>"
"<p>expires in less than %1 days.</p>"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:842
#, kde-format
msgid ""
"<p>The intermediate CA certificate</p>"
"<p align=\"center\"><b>%4</b></p>"
"<p>for your S/MIME encryption certificate</p>"
"<p align=\"center\"><b>%2</b> (serial number %3)</p>"
"<p>expires in less than a day.</p>"
msgid_plural ""
"<p>The intermediate CA certificate</p>"
"<p align=\"center\"><b>%4</b></p>"
"<p>for your S/MIME encryption certificate</p>"
"<p align=\"center\"><b>%2</b> (serial number %3)</p>"
"<p>expires in less than %1 days.</p>"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:848
#, kde-format
msgid ""
"<p>The intermediate CA certificate</p>"
"<p align=\"center\"><b>%4</b></p>"
"<p>for S/MIME certificate</p>"
"<p align=\"center\"><b>%2</b> (serial number %3)</p>"
"<p>expires in less than a day.</p>"
msgid_plural ""
"<p>The intermediate CA certificate</p>"
"<p align=\"center\"><b>%4</b></p>"
"<p>for S/MIME certificate</p>"
"<p align=\"center\"><b>%2</b> (serial number %3)</p>"
"<p>expires in less than %1 days.</p>"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:860
#, kde-format
msgid ""
"<p>Your S/MIME signing certificate</p>"
"<p align=\"center\"><b>%2</b> (serial number %3)</p>"
"<p>expires in less than a day.</p>"
msgid_plural ""
"<p>Your S/MIME signing certificate</p>"
"<p align=\"center\"><b>%2</b> (serial number %3)</p>"
"<p>expires in less than %1 days.</p>"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:864
#, kde-format
msgid ""
"<p>Your S/MIME encryption certificate</p>"
"<p align=\"center\"><b>%2</b> (serial number %3)</p>"
"<p>expires in less than a day.</p>"
msgid_plural ""
"<p>Your S/MIME encryption certificate</p>"
"<p align=\"center\"><b>%2</b> (serial number %3)</p>"
"<p>expires in less than %1 days.</p>"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:868
#, kde-format
msgid ""
"<p>The S/MIME certificate for</p>"
"<p align=\"center\"><b>%2</b> (serial number %3)</p>"
"<p>expires in less than a day.</p>"
msgid_plural ""
"<p>The S/MIME certificate for</p>"
"<p align=\"center\"><b>%2</b> (serial number %3)</p>"
"<p>expires in less than %1 days.</p>"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:879
#, kde-format
msgid "OpenPGP Key Expires Soon"
msgstr ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:880
#, kde-format
msgid "S/MIME Certificate Expires Soon"
msgstr ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:919
#, kde-format
msgid ""
"One or more of your configured OpenPGP encryption keys or S/MIME certificates is not usable for encryption. Please reconfigure your encryption keys and certificates for this identity in the identity configuration dialog.\n"
"If you choose to continue, and the keys are needed later on, you will be prompted to specify the keys to use."
"One or more of your configured OpenPGP signing keys or S/MIME signing certificates is not usable for signing. Please reconfigure your signing keys and certificates for this identity in the identity configuration dialog.\n"
"If you choose to continue, and the keys are needed later on, you will be prompted to specify the keys to use."
msgid "You did not select an encryption key for the recipient of this message; therefore, the message will not be encrypted."
msgstr ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:1651
#, kde-format
msgid "You did not select an encryption key for any of the recipients of this message; therefore, the message will not be encrypted."
msgstr ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:1663
#, kde-format
msgid "You did not select an encryption key for one of the recipients: this person will not be able to decrypt the message if you encrypt it."
msgstr ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:1666
#, kde-format
msgid "You did not select encryption keys for some of the recipients: these persons will not be able to decrypt the message if you encrypt it."
msgstr ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:1732
#, kde-format
msgid "Encryption Key Selection"
msgstr ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:1779
#, kde-format
msgctxt "if in your language something like 'certificate(s)' is not possible please use the plural in the translation"
msgid ""
"There is a problem with the encryption certificate(s) for \"%1\".\n"
"\n"
"Please re-select the certificate(s) which should be used for this recipient."
msgstr ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:1825
#, kde-format
msgctxt "if in your language something like 'certificate(s)' is not possible please use the plural in the translation"
msgid ""
"<qt>No valid and trusted encryption certificate was found for \"%1\".<br/>"
"<br/>"
"Select the certificate(s) which should be used for this recipient. If there is no suitable certificate in the list you can also search for external certificates by clicking the button: search for external certificates.</qt>"
msgstr ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:1835
#, kde-format
msgctxt "if in your language something like 'certificate(s)' is not possible please use the plural in the translation"
msgid ""
"More than one certificate matches \"%1\".\n"
"\n"
"Select the certificate(s) which should be used for this recipient."
# Copyright (C) YEAR Free Software Foundation, Inc.
# This file is distributed under the same license as the PACKAGE package.
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
#, fuzzy
msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2020-01-17 10:10+0100\n"
+"POT-Creation-Date: 2020-01-18 12:30+0100\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <kde-i18n-doc@kde.org>\n"
"Language: \n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
#. +> trunk5
#: config.yaml:0
msgid "Get Involved"
msgstr ""
#. +> trunk5
#: config.yaml:0
msgid "Donate"
msgstr ""
#. +> trunk5
#: config.yaml:0
msgid "KDE Announcement | Release Service"
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/19.12-rc/_index.md:3
msgid "title: 19.12 RC Releases"
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/19.12-rc/_index.md:5
msgid "summary: \"Over 120 individual programs plus dozens of programmer libraries and feature plugins are released simultaneously as part of KDE's release service.\""
msgid "November 29, 2019. Over 120 individual programs plus dozens of programmer libraries and feature plugins are released simultaneously as part of KDE's release service."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/19.12-rc/_index.md:16
msgid "Today they all get release candidate sources meaning they are feature complete but need testing for final bugfixes."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/19.12-rc/_index.md:18
msgid "Distro and app store packagers should update their pre-release channels to check for issues."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/19.12-rc/_index.md:22
msgid "+ [19.12 release notes](https://community.kde.org/Releases/19.12_Release_Notes) for information on tarballs and known issues. + [Package download wiki page](https://community.kde.org/Get_KDE_Software_on_Your_Linux_Distro) + [19.12 RC source info page](https://kde.org/info/applications-19.11.90)"
msgstr ""
#. type: Title ##
#. +> trunk5
#: content/19.12-rc/_index.md:23
#, no-wrap
msgid "Press Contacts"
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/19.12-rc/_index.md:25
msgid "For more information send us an email: [press@kde.org](mailto:press@kde.org)."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2019-12-apps-update/_index.md:3
msgid "title: KDE's December 2019 Apps Update"
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2019-12-apps-update/_index.md:5
#: content/2020-01-apps-update/_index.md:9
msgid "summary: \"What Happened in KDE's Applications This Month\""
msgid "New versions of KDE applications landing in December"
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2019-12-apps-update/_index.md:16
msgid "The release of new versions for KDE applications is part of KDE's continued effort to bring you a complete and up-to-date catalog of fully-featured, beautiful and useful programs for your system."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2019-12-apps-update/_index.md:18
msgid "Available now are new versions of KDE's file browser Dolphin; Kdenlive, one of the most complete open source video editors; the document viewer Okular; KDE's image viewer, Gwenview; and all of your other favorite KDE apps and utilities. All of these applications have been improved, making them faster and more stable and they boast exciting new features. The new versions of KDE applications let you be productive and creative, while at the same time making use of KDE software easy and fun."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2019-12-apps-update/_index.md:20
msgid "We hope you enjoy all the novel features and improvements worked into all of KDE's apps!"
msgid "[Calligra Plan](https://kde.org/applications/office/org.kde.calligraplan) is getting a big release in December. KDE's project planning and management tool has hit a huge milestone since the prior version was released almost two years ago."
msgid "Plan helps you manage small and large projects with multiple resources. In order for you to model your project, Plan offers different types of task dependencies and timing constraints. You can define your tasks, estimate the effort needed to perform each, allocate resources and then schedule the project according to your needs and the resources available."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2019-12-apps-update/_index.md:30
msgid "One of Plan's strengths is its excellent support for Gantt charts. Gantt charts are charts made up of horizontal bars that provide a graphical illustration of a schedule and help plan, coordinate, and track specific tasks in a project. Using Gantt charts in Plan will help you better monitor your project's workflow."
msgstr ""
#. type: Title ##
#. +> trunk5
#: content/2019-12-apps-update/_index.md:31
#, no-wrap
msgid "Pump up the Volume on [Kdenlive](https://kdenlive.org)"
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2019-12-apps-update/_index.md:34
msgid "Developers of [Kdenlive](https://kdenlive.org) have been adding new features and squashing bugs at breakneck speed. This version alone comes with more than 200 commits."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2019-12-apps-update/_index.md:36
msgid "A lot of work has gone into improving support for audio. In the \"bug solved\" department they have gotten rid of a huge memory consumption issue, inefficiency of audio thumbnails, and have sped up their storage."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2019-12-apps-update/_index.md:38
msgid "But even more exciting is that Kdenlive now comes with a spectacular new sound mixer (see image). Developers have also added a new audio clip display in the clip monitor and the project bin so you can better synchronize your moving images with the soundtrack."
msgid "In the \"resolving paper-cuts\" department, Kdenlive has acquired many performance and usability improvements, and developers have fixed many bugs in the Windows version of the video editor."
msgstr ""
#. type: Title ##
#. +> trunk5
#: content/2019-12-apps-update/_index.md:43
#, no-wrap
msgid "[Dolphin](https://userbase.kde.org/Dolphin)'s Previews and Navigation"
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2019-12-apps-update/_index.md:46
msgid "KDE's powerful file browser [Dolphin](https://userbase.kde.org/Dolphin) adds new features to help you find and reach what you are looking for in your file system. One such feature is the redesigned advanced search options and another is that now you can go backwards and forwards in the history of places you have already visited multiple times by long-pressing the arrow icon in the toolbar. The feature that lets you quickly reach recently saved or recently accessed files has been reworked and its glitches ironed out."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2019-12-apps-update/_index.md:48
msgid "One of the main concerns of Dolphin's developers is to allow users to preview the contents of files before they open them. For example, in the new version of Dolphin you can preview GIFs by highlighting them and then hovering over the preview pane. You can also click and play videos and audio files in the preview pane."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2019-12-apps-update/_index.md:50
#, no-wrap
msgid "If you are a fan of graphic novels, Dolphin can now display thumbnails for .cb7 comic books (check out the support for this comic book format also in Okular -- see below). And, talking about thumbnails, zooming in on thumbnails has been a thing in Dolphin for a long time now: hold down <kbd>Ctrl</kbd>, spin the wheel and the thumbnail will grow or shrink. A new functionality is that now you can reset the zoom to the default level by hitting <kbd>Ctrl</kbd> + <kbd>0</kbd>.\n"
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2019-12-apps-update/_index.md:52
msgid "Another useful feature is that Dolphin shows you which programs are preventing a device from being unmounted."
msgid "[KDE Connect](https://community.kde.org/KDEConnect): Let your Phone Control your Desktop"
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2019-12-apps-update/_index.md:58
msgid "The latest version of [KDE Connect](https://community.kde.org/KDEConnect) comes stuffed with new features. One of the most noticeable is that there is a new SMS app that lets you read and write SMS with the full conversation history."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2019-12-apps-update/_index.md:60
msgid "A new [Kirigami](https://kde.org/products/kirigami/)-based user interface means you can run KDE Connect not only on Android, but also on all those mobile Linux platforms we'll be seeing in upcoming devices like the PinePhone and the Librem 5. The Kirigami interface also provides new features for desktop-to-desktop users, such as media control, remote input, device ringing, file transfer and running commands."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2019-12-apps-update/_index.md:62
#, no-wrap
msgid "{{<img src=\"kdeconnect2.png\" style=\"max-width: 600px\" caption=\"The new interface on desktop\" >}}\n"
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2019-12-apps-update/_index.md:64
msgid "You could already use KDE Connect to control the volume of media playing on your desktop, but now you can use it to also control your system's global volume from your phone -- super handy when using your phone as a remote. When giving a talk, you can also control your presentation using KDE Connect to flip forward and back through your slides."
msgid "Another feature that has been around for while is how you can use KDE Connect to send a file to your phone, but what's new in this version is that you can have your phone immediately open the file once it is received. KDE Itinerary uses this to send travel information to your phone from within KMail."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2019-12-apps-update/_index.md:70
msgid "In a related note, you can now also send files from Thunar (Xfce's file manager) and Elementary applications such as Pantheon Files. Displaying progress of the copy of multiple files has been improved a lot and files received from Android now show their correct modification time."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2019-12-apps-update/_index.md:72
msgid "When it comes to notifications, you can now trigger actions from Android notifications from the desktop and KDE Connect uses advanced features from Plasma's notification center to provide better notifications. The pairing confirmation notification does not time out so you can't miss it any more."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2019-12-apps-update/_index.md:74
msgid "Finally, if you are using KDE Connect from the command line, *kdeconnect-cli* now features improved *zsh* autocompletion."
msgid "[Gwenview](https://userbase.kde.org/Gwenview) now lets you adjust the JPEG compression level when you save images you have edited. Developers have also improved the performance for remote images and Gwenview can now import photos both to or from remote locations."
msgstr ""
#. type: Title ##
#. +> trunk5
#: content/2019-12-apps-update/_index.md:79
#, no-wrap
msgid "[Okular](https://kde.org/applications/office/org.kde.okular) support .cb7 support"
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2019-12-apps-update/_index.md:82
msgid "[Okular](https://kde.org/applications/office/org.kde.okular), the document viewer that lets you read, annotate and verify all sorts of documents, including PDFs, EPubs, ODTs and MDs, now also supports files using the .cb7 comic book format."
msgstr ""
#. type: Title ##
#. +> trunk5
#: content/2019-12-apps-update/_index.md:83
#, no-wrap
msgid "[Elisa](https://kde.org/applications/multimedia/org.kde.elisa): Simple but Complete Music Player"
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2019-12-apps-update/_index.md:86
msgid "[Elisa](https://kde.org/applications/multimedia/org.kde.elisa) is a KDE music player that combines simplicity with an elegant and modern interface. In its latest version, Elisa has optimized its looks to adapt better to High DPI screens. It also integrates better with other KDE applications and has acquired support for KDE's global menu system."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2019-12-apps-update/_index.md:88
msgid "Indexing music files has also improved and Elisa now supports web radios and ships with a few examples for you to try."
msgid "[Spectacle](https://kde.org/applications/utilities/org.kde.spectacle) is Touchscreen-Ready"
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2019-12-apps-update/_index.md:94
msgid "[Spectacle](https://kde.org/applications/utilities/org.kde.spectacle), KDE's default screen-grabbing program, is another KDE application that has evolved to acquire touchscreen capabilities: Its new touch-friendly drag handler makes it much easier to drag rectangles to capture the parts of the desktop you want on tactile-enabled devices."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2019-12-apps-update/_index.md:96
msgid "Other improvements are the new autosave function, which comes in handy for rapidly taking multiple screenshots, and the animated progress bars, which make sure you can clearly see what Spectacle is doing."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2019-12-apps-update/_index.md:98
#, no-wrap
msgid "{{<img style=\"max-width:500px\" src=\"spectacle.png\" caption=\"Spectacle new drag handler\" >}}\n"
msgid "The new release of [Plasma Browser Integration](https://community.kde.org/Plasma/Browser_Integration) now features a blacklist for the media controls functionality. This is useful for when you visit a site with a lot of media you can play, which can make it difficult to select what you want to control from your desktop. The blacklist lets you exclude these sites from the media controls."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2019-12-apps-update/_index.md:104
msgid "The new version also lets you keep the origin URL in file metadata and adds support for the Web Share API. The Web Share API lets browsers share links, text and files with other apps in the same way KDE apps do, improving the integration of non-native browsers like Firefox, Chrome/Chromium and Vivaldi, with the rest of KDE's applications."
msgid "Quite a few of KDE applications can be downloaded from the Microsoft Store. Krita and Okular have been there for a while, and they are joined now by [Kile](https://kde.org/applications/office/org.kde.kile), a user-friendly LaTeX editor."
msgid "Which brings us to new arrivals: [SubtitleComposer](https://invent.kde.org/kde/subtitlecomposer), an application that lets you easily create subtitles for videos, is now in the KDE Incubator, on track to become a full member of KDE's applications family. Welcome!"
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2019-12-apps-update/_index.md:118
msgid "Meanwhile, [plasma-nano](https://invent.kde.org/kde/plasma-nano), a minimal version of Plasma designed for embedded devices was moved into the Plasma repos ready for release with 5.18."
msgstr ""
#. type: Title ##
#. +> trunk5
#: content/2019-12-apps-update/_index.md:119
#, no-wrap
msgid "Release 19.12"
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2019-12-apps-update/_index.md:121
msgid "Some of our projects release on their own timescale and some get released en-masse. The 19.12 bundle of projects was released today and should be available through app stores and distros soon. See the [19.12 releases page](https://www.kde.org/announcements/releases/19.12). This bundle was previously called KDE Applications but has been de-branded to become a release service to avoid confusion with all the other applications by KDE and because it is dozens of different products rather than a single whole."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2020-01-apps-update/_index.md:3
msgid "title: KDE's January 2020 Apps Update"
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2020-01-apps-update/_index.md:5
msgid "publishDate: 2020-01-09 12:00:00"
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2020-01-apps-update/_index.md:14
msgid "The year is 2020, we are living in the future, let's see what KDE apps has brought us in the last month!"
msgstr ""
#. type: Title ##
#. +> trunk5
#: content/2020-01-apps-update/_index.md:15
#, no-wrap
msgid "KTimeTracker ported to KDE Frameworks 5"
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2020-01-apps-update/_index.md:21
msgid "The long-awaited modernized version of KTimeTracker is finally released. The application is a personal time tracker for busy people which is now available on Linux, FreeBSD and Windows. Over the course of 2019 it had been ported to Qt5 and KDE Frameworks after being unmaintained since around 2013."
msgid "The new version is also polished and slightly modernised with the most noticeable new features being the new Task Time Editing dialog and live preview in the Export dialog as seen in the picture below."
msgid "https://download.kde.org/stable/ktimetracker/5.0.1/src/ It is available through your Linux distro or as a [Windows installer](https://download.kde.org/stable/ktimetracker/5.0.1/win64/) and there's even [untested MacOS builds](https://binary-factory.kde.org/job/KTimeTracker_Nightly_macos/) built nightly."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2020-01-apps-update/_index.md:34
msgid "[The release is announced in the blog of the maintainer Alexander Potashev](https://aspotashev.blogspot.com/2019/12/ktimetracker-501-released.html)"
msgstr ""
#. type: Title ##
#. +> trunk5
#: content/2020-01-apps-update/_index.md:35
#, no-wrap
msgid "KStars 3.3.9"
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2020-01-apps-update/_index.md:38
msgid "Astronomy program [KStars got new features in 3.3.9](http://knro.blogspot.com/2020/01/kstars-v339-is-released.html)."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2020-01-apps-update/_index.md:40
msgid "Images can have fine changes in Shadows, Midtones, and Highlights allowing the faintest of stars to be seen."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2020-01-apps-update/_index.md:42
msgid "Alternative constellations from the Western Sky Culture which is fascinating to [read about](https://sternenkarten.com/2019/12/27/kstars-clines/)."
msgid "[KStars is available for](https://edu.kde.org/kstars/) Android, Windows, MacOS, Snap store and from your Linux distro."
msgstr ""
#. type: Title ##
#. +> trunk5
#: content/2020-01-apps-update/_index.md:47
#, no-wrap
msgid "Common Frameworks - KNewStuff"
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2020-01-apps-update/_index.md:50
msgid "Here on the Apps Update we focus on the apps rather than coding libraries. But new features in the common libraries will mean new features in all your apps :)"
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2020-01-apps-update/_index.md:52
msgid "This month saw a redesigned UI for KNewStuff, the framework to download addons for your applications. The browse and download dialog was redesigned and the comments section can now be filtered. It'll be appearing in all your apps and settings modules shortly starting with the Global Theme module in System Settings."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2020-01-apps-update/_index.md:54
#, no-wrap
msgid "{{< img src=\"knewstuff-comments.png\" caption=\"Filters on Comments\" alt=\"Filters on Comments\" style=\"width: 800px\">}}\n"
msgid "[KDevelop's monthly bugfix update 5.4.6](https://www.kdevelop.org/news/kdevelop-546-released) fixed a longstanding problem where the GPL and LGPL headers were mixed up, grab it from your distro or Appimage to make sure your licencing is correct."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2020-01-apps-update/_index.md:62
msgid "[Latte Dock 0.9.7](https://psifidotos.blogspot.com/2019/12/latte-bug-fix-release-v097.html) fixed some features with Qt 5.14 and removed some crashes."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2020-01-apps-update/_index.md:64
msgid "Dolphin Plugins 19.12.1 fixed a broken SVN Commit dialog."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2020-01-apps-update/_index.md:66
msgid "There was improved file indexing in Elisa. It also fixed some compilation issues on Android and without Baloo."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2020-01-apps-update/_index.md:68
msgid "The new release of KPat was declaired to have no [OARS](https://hughsie.github.io/oars/index.html) relevant age restrictions."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2020-01-apps-update/_index.md:70
msgid "Okular fixed a crash when closing the print preview dialog."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2020-01-apps-update/_index.md:72
msgid "This month's release of Kdenlive video editor had an impressive number of fixes best of all was updating the [screenshots](https://kde.org/applications/multimedia/org.kde.kdenlive) used in the meta info. It also has dozens of improvements and fixes in timeline and preview handling."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2020-01-apps-update/_index.md:74
msgid "New JavaScript support is now in Kate's [LSP](https://langserver.org/) client."
msgstr ""
#. type: Title ##
#. +> trunk5
#: content/2020-01-apps-update/_index.md:75
#, no-wrap
msgid "Enjoy KDE on the Flathub Store"
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2020-01-apps-update/_index.md:78
msgid "KDE is embracing all the app stores. We can now deliver more and more of our programs directly to you the user. One of the leading app stores on Linux is [Flathub](https://flathub.org/home) which uses the FlatPak format."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2020-01-apps-update/_index.md:80
msgid "You may well already have Flatpak and Flathub configured on your system and ready to use in Discover or other app installers. For example KDE neon has set it up by default on installs for over a year now. If not it's a quick [setup process](https://flatpak.org/setup/) for all the major distros."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2020-01-apps-update/_index.md:82
msgid "If you're interested in the techy details you can browse [KDE's Flatpak packaging repo](https://phabricator.kde.org/source/flatpak-kde-applications/) and read the [KDE Flatpak guide](https://community.kde.org/Guidelines_and_HOWTOs/Flatpak)."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2020-01-apps-update/_index.md:84
msgid "But probably what you're interested in is the apps so take a look at what the [Flathub store has under KDE](https://flathub.org/apps/search/kde)."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2020-01-apps-update/_index.md:86
#, no-wrap
msgid "{{< img src=\"flathub.png\" alt=\"KDE on Flathub\" style=\"width: 800px\" >}}\n"
msgstr ""
#. type: Title ##
#. +> trunk5
#: content/2020-01-apps-update/_index.md:87
#, no-wrap
msgid "LabPlot now on Chocolatey"
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2020-01-apps-update/_index.md:90
msgid "[Chocolatey](https://chocolatey.org/) is a package manager for Windows. If you want full control over what software is installed on your Windows machine or whole office of machines then Chocolatey gives you easy control over that just like you are used to on Linux."
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2020-01-apps-update/_index.md:92
msgid "[LabPlot](https://chocolatey.org/packages/labplot) is KDE's app for interactive graphing and analysis of scientific data and it is now available through Chocolatey. Give it a try!"
msgid "{{< img src=\"labplot.png\" alt=\"LabPlot on Chocolatey\" style=\"width: 800px\" >}}\n"
msgstr ""
#. type: Title ##
#. +> trunk5
#: content/2020-01-apps-update/_index.md:97
#, no-wrap
msgid "Website Updates"
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2020-01-apps-update/_index.md:100
msgid "The recently revived KDE Web Team has been updating a bunch of our older themed sites. The newly relaunched [KPhotoAlbum](https://www.kphotoalbum.org/) website is a lovely example, updated and refreshed for our photo storage and search app."
msgid "And if you want to show off a simple to use but full featured local music player but were ashamed by the old looking website, [JuK](https://juk.kde.org/) has just had an updated website too."
msgstr ""
#. type: Title ##
#. +> trunk5
#: content/2020-01-apps-update/_index.md:105
#, no-wrap
msgid "Releases 19.12.1"
msgstr ""
#. type: Plain text
#. +> trunk5
#: content/2020-01-apps-update/_index.md:107
msgid "Some of our projects release on their own timescale and some get released en-masse. The 19.12.1 bundle of projects was released today and should be available through app stores and distros soon. See the [19.12.1 releases page](https://www.kde.org/info/releases-19.12.1.php). This bundle was previously called KDE Applications but has been de-branded to become a release service to avoid confusion with all the other applications by KDE and because it is dozens of different products rather than a single whole."
msgstr ""
#. +> trunk5
#: i18n/en.yaml:0
-msgid "Announcements"
+msgid "Learn More"
msgstr ""
#. +> trunk5
#: i18n/en.yaml:0
-msgid "KDE Patrons"
+msgid "Products"
msgstr ""
#. +> trunk5
#: i18n/en.yaml:0
-msgid "KDE Timeline"
+msgid "Code of Conduct"
msgstr ""
#. +> trunk5
#: i18n/en.yaml:0
-msgid "Learn More"
+msgid "Donate to KDE"
msgstr ""
#. +> trunk5
#: i18n/en.yaml:0
msgid "Show your love for KDE! Purchase books, mugs, apparel, and more to support KDE."
msgstr ""
#. +> trunk5
#: i18n/en.yaml:0
-msgid "Development and communication of KDE software"
+msgid "KDE Patrons"
msgstr ""
#. +> trunk5
#: i18n/en.yaml:0
-msgid "Donate via PayPal"
+msgid "Resources"
msgstr ""
#. +> trunk5
#: i18n/en.yaml:0
msgid "News & Press"
msgstr ""
#. +> trunk5
#: i18n/en.yaml:0
-msgid "Destinations"
+msgid "RSS Feed"
msgstr ""
#. +> trunk5
#: i18n/en.yaml:0
-msgid "Other ways to donate"
+msgid "International Websites"
msgstr ""
#. +> trunk5
#: i18n/en.yaml:0
-msgid "Code of Conduct"
+msgid "API Documentation"
msgstr ""
#. +> trunk5
#: i18n/en.yaml:0
-msgid "Develop"
+msgid "Download KDE Software"
msgstr ""
#. +> trunk5
#: i18n/en.yaml:0
-msgid "KDE applications"
+msgid "Destinations"
msgstr ""
#. +> trunk5
#: i18n/en.yaml:0
-msgid "Visit the KDE MetaStore"
+msgid "Announcements"
msgstr ""
#. +> trunk5
#: i18n/en.yaml:0
-msgid "Products"
+msgid "Development and communication of KDE software"