"This opens a new window just like this one with the current location and view.<nl/>"
"You can drag and drop items between windows."
msgstr ""
#. +> trunk5 stable5
#: dolphinmainwindow.cpp:1205
#, kde-format
msgctxt "@action:inmenu File"
msgid "New Tab"
msgstr "Ny fane"
#. +> trunk5 stable5
#: dolphinmainwindow.cpp:1206
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"This opens a new <emphasis>Tab</emphasis> with the current location and view.<nl/>"
"A tab is an additional view within this window. You can drag and drop items between tabs."
msgstr ""
#. +> trunk5
#: dolphinmainwindow.cpp:1215
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid "This adds the selected folder to the Places panel."
msgstr ""
#. +> trunk5 stable5
#: dolphinmainwindow.cpp:1220
#, kde-format
msgctxt "@action:inmenu File"
msgid "Close Tab"
msgstr "Lukk fane"
#. +> trunk5 stable5
#: dolphinmainwindow.cpp:1221
#, kde-format
msgctxt "@info:whatsthis"
msgid "This closes the currently viewed tab. If no more tabs are left this window will close instead."
msgstr ""
#. +> trunk5 stable5
#: dolphinmainwindow.cpp:1226
#, fuzzy, kde-format
#| msgid "Close this window"
msgctxt "@info:whatsthis quit"
msgid "This closes this window."
msgstr "Lukk dette vinduet"
#. i18n: This will be the last paragraph for the whatsthis for all three:
#. Cut, Copy and Paste
#. +> trunk5 stable5
#: dolphinmainwindow.cpp:1235
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid "<para><emphasis>Cut, Copy</emphasis> and <emphasis>Paste</emphasis> work between many applications and are among the most used commands. That's why their <emphasis>keyboard shortcuts</emphasis> are prominently placed right next to each other on the keyboard: <shortcut>Ctrl+X</shortcut>, <shortcut>Ctrl+C</shortcut> and <shortcut>Ctrl+V</shortcut>.</para>"
msgstr ""
#. +> trunk5 stable5
#: dolphinmainwindow.cpp:1242
#, kde-kuit-format
msgctxt "@info:whatsthis cut"
msgid ""
"This copies the items in your current selection to the <emphasis>clipboard</emphasis>.<nl/>"
"Use the <emphasis>Paste</emphasis> action afterwards to copy them from the clipboard to a new location. The items will be removed from their initial location."
msgstr ""
#. +> trunk5 stable5
#: dolphinmainwindow.cpp:1248
#, kde-kuit-format
msgctxt "@info:whatsthis copy"
msgid ""
"This copies the items in your current selection to the <emphasis>clipboard</emphasis>.<nl/>"
"Use the <emphasis>Paste</emphasis> action afterwards to copy them from the clipboard to a new location."
msgstr ""
#. +> trunk5 stable5
#: dolphinmainwindow.cpp:1256
#, kde-format
msgctxt "@action:inmenu Edit"
msgid "Paste"
msgstr "Lim inn"
#. +> trunk5 stable5
#: dolphinmainwindow.cpp:1257
#, kde-kuit-format
msgctxt "@info:whatsthis paste"
msgid ""
"This copies the items from your <emphasis>clipboard</emphasis> to the currently viewed folder.<nl/>"
"If the items were added to the clipboard by the <emphasis>Cut</emphasis> action they are removed from their old location."
msgstr ""
#. +> trunk5 stable5
#: dolphinmainwindow.cpp:1264
#, fuzzy, kde-format
#| msgid "Shared files and folders"
msgctxt "@info:tooltip"
msgid "Search for files and folders"
msgstr "Delte filer og mapper"
#. +> trunk5 stable5
#: dolphinmainwindow.cpp:1265
#, kde-kuit-format
msgctxt "@info:whatsthis find"
msgid ""
"<para>This helps you find files and folders by opening a <emphasis>find bar</emphasis>. There you can enter search terms and specify settings to find the objects you are looking for.</para>"
"<para>Use this help again on the find bar so we can have a look at it while the settings are explained.</para>"
msgstr ""
#. +> trunk5
#: dolphinmainwindow.cpp:1276
#, kde-format
msgctxt "@action:inmenu"
msgid "Toggle Search Bar"
msgstr ""
#. +> trunk5
#: dolphinmainwindow.cpp:1277
#, fuzzy, kde-format
#| msgid "Search"
msgctxt "@action:intoolbar"
msgid "Search"
msgstr "Søk"
#. +> trunk5 stable5
#: dolphinmainwindow.cpp:1284
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid "This selects all files and folders in the current location."
msgstr ""
#. +> trunk5 stable5
#: dolphinmainwindow.cpp:1288 dolphinpart.cpp:190
#, kde-format
msgctxt "@action:inmenu Edit"
msgid "Invert Selection"
msgstr "Omvend merking"
#. +> trunk5 stable5
#: dolphinmainwindow.cpp:1289
#, kde-kuit-format
msgctxt "@info:whatsthis invert"
msgid "This selects all objects that you have currently <emphasis>not</emphasis> selected instead."
msgstr ""
#. +> trunk5 stable5
#: dolphinmainwindow.cpp:1299
#, kde-kuit-format
msgctxt "@info:whatsthis find"
msgid ""
"<para>This splits the folder view below into two autonomous views.</para>"
"<para>This way you can see two locations at once and move items between them quickly.</para>"
"Click this again afterwards to recombine the views."
msgstr ""
#. +> trunk5 stable5
#: dolphinmainwindow.cpp:1308
#, kde-format
msgctxt "@action:intoolbar Stash"
msgid "Stash"
msgstr "Hylle"
#. +> trunk5 stable5
#: dolphinmainwindow.cpp:1309
#, kde-format
msgctxt "@info"
msgid "Opens the stash virtual directory in a split window"
msgstr "Åpner hyllen – en virtuell mappe – i et delt vindu."
#. +> trunk5 stable5
#: dolphinmainwindow.cpp:1318
#, kde-format
msgctxt "@action:inmenu View"
msgid "Stop"
msgstr "Stopp"
#. +> trunk5 stable5
#: dolphinmainwindow.cpp:1319
#, kde-format
msgctxt "@info"
msgid "Stop loading"
msgstr "Stopp lasting"
#. +> trunk5 stable5
#: dolphinmainwindow.cpp:1320
#, kde-format
msgctxt "@info"
msgid "This stops the loading of the contents of the current folder."
msgstr ""
#. +> trunk5 stable5
#: dolphinmainwindow.cpp:1325
#, kde-format
msgctxt "@action:inmenu Navigation Bar"
msgid "Editable Location"
msgstr "Redigerbar adresse"
#. +> trunk5 stable5
#: dolphinmainwindow.cpp:1327
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"This toggles the <emphasis>Location Bar</emphasis> to be editable so you can directly enter a location you want to go to.<nl/>"
"You can also switch to editing by clicking to the right of the location and switch back by confirming the edited location."
msgstr ""
#. +> trunk5 stable5
#: dolphinmainwindow.cpp:1335
#, kde-format
msgctxt "@action:inmenu Navigation Bar"
msgid "Replace Location"
msgstr "Erstatt adresse"
#. +> trunk5 stable5
#: dolphinmainwindow.cpp:1340
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid "This switches to editing the location and selects it so you can quickly enter a different location."
msgstr ""
#. +> trunk5 stable5
#: dolphinmainwindow.cpp:1361
#, kde-format
msgctxt "@action:inmenu File"
msgid "Undo close tab"
msgstr "Angre fanelukking"
#. +> trunk5 stable5
#: dolphinmainwindow.cpp:1363
#, kde-format
msgctxt "@info:whatsthis undo close tab"
msgid "This returns you to the previously closed tab."
msgstr ""
#. +> trunk5 stable5
#: dolphinmainwindow.cpp:1370
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"This undoes the last change you made to files or folders.<nl/>"
"Such changes include <interface>creating, renaming</interface> and <interface>moving</interface> them to a different location or to the <filename>Trash</filename>. <nl/>"
"Changes that can't be undone will ask for your confirmation."
msgstr ""
#. +> trunk5 stable5
#: dolphinmainwindow.cpp:1381
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"Go to your <filename>Home</filename> folder.<nl/>"
"Every user account has their own <filename>Home</filename> that contains their data including folders that contain personal application data."
msgstr ""
#. +> trunk5 stable5
#: dolphinmainwindow.cpp:1388
#, kde-format
msgctxt "@action:inmenu Tools"
msgid "Show Filter Bar"
msgstr "Vis filterlinje"
#. +> trunk5 stable5
#: dolphinmainwindow.cpp:1389
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"This opens the <emphasis>Filter Bar</emphasis> at the bottom of the window.<nl/>"
" There you can enter a text to filter the files and folders currently displayed. Only those that contain the text in their name will be kept in view."
msgstr ""
#. +> trunk5 stable5
#: dolphinmainwindow.cpp:1398
#, kde-format
msgctxt "@action:inmenu Tools"
msgid "Compare Files"
msgstr "Sammenligne filer"
#. +> trunk5 stable5
#: dolphinmainwindow.cpp:1406
#, kde-format
msgctxt "@action:inmenu Tools"
msgid "Open Terminal"
msgstr "Åpne terminal"
#. +> trunk5 stable5
#: dolphinmainwindow.cpp:1408
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<para>This opens a <emphasis>terminal</emphasis> application for the viewed location.</para>"
"<para>To learn more about terminals use the help in the terminal application.</para>"
msgstr ""
#. +> trunk5 stable5
#: dolphinmainwindow.cpp:1427
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid "This switches between having a <emphasis>Menubar</emphasis> and having a <interface>Control</interface> button. Both contain mostly the same commands and configuration options."
msgstr ""
#. +> trunk5 stable5
#: dolphinmainwindow.cpp:1449
#, kde-format
msgctxt "@action:inmenu"
msgid "Next Tab"
msgstr "Neste fane"
#. +> trunk5 stable5
#: dolphinmainwindow.cpp:1450
#, kde-format
msgctxt "@action:inmenu"
msgid "Activate Next Tab"
msgstr "Gå til neste fane"
#. +> trunk5 stable5
#: dolphinmainwindow.cpp:1456
#, kde-format
msgctxt "@action:inmenu"
msgid "Previous Tab"
msgstr "Forrige fane"
#. +> trunk5 stable5
#: dolphinmainwindow.cpp:1457
#, kde-format
msgctxt "@action:inmenu"
msgid "Activate Previous Tab"
msgstr "Gå til forrige fane"
#. +> trunk5 stable5
#: dolphinmainwindow.cpp:1464
#, kde-format
msgctxt "@action:inmenu"
msgid "Show Target"
msgstr "Vis mål"
#. +> trunk5 stable5
#: dolphinmainwindow.cpp:1470
#, kde-format
msgctxt "@action:inmenu"
msgid "Open in New Tab"
msgstr "Åpne i ny fane"
#. +> trunk5 stable5
#: dolphinmainwindow.cpp:1475
#, kde-format
msgctxt "@action:inmenu"
msgid "Open in New Tabs"
msgstr "Åpne i nye faner"
#. +> trunk5 stable5
#: dolphinmainwindow.cpp:1480
#, kde-format
msgctxt "@action:inmenu"
msgid "Open in New Window"
msgstr "Åpne i nytt vindu"
#. +> trunk5 stable5
#: dolphinmainwindow.cpp:1490
#, kde-format
msgctxt "@action:inmenu Panels"
msgid "Unlock Panels"
msgstr "Lås opp paneler"
#. +> trunk5 stable5
#: dolphinmainwindow.cpp:1492
#, kde-format
msgctxt "@action:inmenu Panels"
msgid "Lock Panels"
msgstr "Lås paneler"
#. +> trunk5 stable5
#: dolphinmainwindow.cpp:1494
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"This switches between having panels <emphasis>locked</emphasis> or <emphasis>unlocked</emphasis>.<nl/>"
"Unlocked panels can be dragged to the other side of the window and have a close button.<nl/>"
"Locked panels are embedded more cleanly."
msgstr ""
#. +> trunk5 stable5
#: dolphinmainwindow.cpp:1503
#, kde-format
msgctxt "@title:window"
msgid "Information"
msgstr "Informasjon"
#. i18n: This is the last paragraph for the "What's This"-texts of all four panels.
#. +> trunk5 stable5
#: dolphinmainwindow.cpp:1527
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid "<para>To show or hide panels like this go to <interface>Control|Panels</interface> or <interface>View|Panels</interface>.</para>"
msgstr ""
#. +> trunk5 stable5
#: dolphinmainwindow.cpp:1532
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<para> This toggles the <emphasis>information</emphasis> panel at the right side of the window.</para>"
"<para>The panel provides in-depth information about the items your mouse is hovering over or about the selected items. Otherwise it informs you about the currently viewed folder.<nl/>"
"For single items a preview of their contents is provided.</para>"
msgstr ""
#. +> trunk5 stable5
#: dolphinmainwindow.cpp:1539
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<para>This panel provides in-depth information about the items your mouse is hovering over or about the selected items. Otherwise it informs you about the currently viewed folder.<nl/>"
"For single items a preview of their contents is provided.</para>"
"<para>You can configure which and how details are given here by right-clicking.</para>"
msgstr ""
#. +> trunk5 stable5
#: dolphinmainwindow.cpp:1547
#, kde-format
msgctxt "@title:window"
msgid "Folders"
msgstr "Mapper"
#. +> trunk5 stable5
#: dolphinmainwindow.cpp:1569
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"This toggles the <emphasis>folders</emphasis> panel at the left side of the window.<nl/>"
"<nl/>"
"It shows the folders of the <emphasis>file system</emphasis> in a <emphasis>tree view</emphasis>."
msgstr ""
#. +> trunk5 stable5
#: dolphinmainwindow.cpp:1573
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<para>This panel shows the folders of the <emphasis>file system</emphasis> in a <emphasis>tree view</emphasis>.</para>"
"<para>Click a folder to go there. Click the arrow to the left of a folder to see its subfolders. This allows quick switching between any folders.</para>"
msgstr ""
#. +> trunk5 stable5
#: dolphinmainwindow.cpp:1582
#, kde-format
msgctxt "@title:window Shell terminal"
msgid "Terminal"
msgstr "Terminal"
#. +> trunk5 stable5
#: dolphinmainwindow.cpp:1608
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<para>This toggles the <emphasis>terminal</emphasis> panel at the bottom of the window.<nl/>"
"The location in the terminal will always match the folder view so you can navigate using either.</para>"
"<para>The terminal panel is not needed for basic computer usage but can be useful for advanced tasks. To learn more about terminals use the help in a standalone terminal application like Konsole.</para>"
msgstr ""
#. +> trunk5 stable5
#: dolphinmainwindow.cpp:1615
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<para>This is the <emphasis>terminal</emphasis> panel. It behaves like a normal terminal but will match the location of the folder view so you can navigate using either.</para>"
"<para>The terminal panel is not needed for basic computer usage but can be useful for advanced tasks. To learn more about terminals use the help in a standalone terminal application like Konsole.</para>"
msgid "This displays all places in the places panel that have been hidden. They will appear semi-transparent unless you uncheck their hide property."
msgstr ""
#. +> trunk5 stable5
#: dolphinmainwindow.cpp:1680
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<para>This toggles the <emphasis>places</emphasis> panel at the left side of the window.</para>"
"<para>It allows you to go to locations you have bookmarked and to access disk or media attached to the computer or to the network. It also contains sections to find recently saved files or files of a certain type.</para>"
msgstr ""
#. +> trunk5 stable5
#: dolphinmainwindow.cpp:1686
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<para>This is the <emphasis>Places</emphasis> panel. It allows you to go to locations you have bookmarked and to access disk or media attached to the computer or to the network. It also contains sections to find recently saved files or files of a certain type.</para>"
"<para>Click on an entry to go there. Click with the right mouse button instead to open any entry in a new tab or new window.</para>"
"<para>New entries can be added by dragging folders onto this panel. Right-click any section or entry to hide it. Right-click an empty space on this panel and select <interface>Show Hidden Places</interface> to display it again.</para>"
#| msgctxt "@action:inmenu Add current folder to places"
#| msgid "Add to Places"
msgctxt "@action:inmenu Add current folder to places"
msgid "Add '%1' to Places"
msgstr "Legg til i Steder"
#. +> trunk5 stable5
-#: dolphinmainwindow.cpp:1744
+#: dolphinmainwindow.cpp:1745
#, kde-format
msgctxt "@action:inmenu Add current folder to places"
msgid "Add to Places"
msgstr "Legg til i Steder"
#. +> trunk5 stable5
-#: dolphinmainwindow.cpp:1781
+#: dolphinmainwindow.cpp:1782
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<para>Go to the folder that contains the currently viewed one.</para>"
"<para>All files and folders are organized in a hierarchical <emphasis>file system</emphasis>. At the top of this hierarchy is a directory that contains all data connected to this computer—the <emphasis>root directory</emphasis>.</para>"
msgstr ""
#. +> trunk5
-#: dolphinmainwindow.cpp:1799
+#: dolphinmainwindow.cpp:1800
#, fuzzy, kde-format
#| msgid "Show Help menu"
msgctxt "@action"
msgid "Show menu"
msgstr "Vis hjelp-menyen"
#. +> stable5
#: dolphinmainwindow.cpp:1730
#, kde-format
msgctxt "@action"
msgid "Control"
msgstr "Styring"
#. +> trunk5 stable5
-#: dolphinmainwindow.cpp:1919
+#: dolphinmainwindow.cpp:1920
#, kde-format
msgctxt "@action:intoolbar Close left view"
msgid "Close"
msgstr "Lukk"
#. +> trunk5 stable5
-#: dolphinmainwindow.cpp:1920
+#: dolphinmainwindow.cpp:1921
#, kde-format
msgctxt "@info"
msgid "Close left view"
msgstr "Lukk venstre visning"
#. +> trunk5 stable5
-#: dolphinmainwindow.cpp:1923
+#: dolphinmainwindow.cpp:1924
#, kde-format
msgctxt "@action:intoolbar Close right view"
msgid "Close"
msgstr "Lukk"
#. +> trunk5 stable5
-#: dolphinmainwindow.cpp:1924
+#: dolphinmainwindow.cpp:1925
#, kde-format
msgctxt "@info"
msgid "Close right view"
msgstr "Lukk høyre visning"
#. +> trunk5 stable5
-#: dolphinmainwindow.cpp:1928
+#: dolphinmainwindow.cpp:1929
#, kde-format
msgctxt "@action:intoolbar Split view"
msgid "Split"
msgstr "Del"
#. +> trunk5 stable5
-#: dolphinmainwindow.cpp:1929
+#: dolphinmainwindow.cpp:1930
#, kde-format
msgctxt "@info"
msgid "Split view"
msgstr "Delt visning"
#. +> trunk5 stable5
-#: dolphinmainwindow.cpp:1966
+#: dolphinmainwindow.cpp:1967
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<para>This is the <emphasis>Menubar</emphasis>. It provides access to commands and configuration options. Left-click on any of the menus on this bar to see its contents.</para>"
"<para>The Menubar can be hidden by unchecking <interface>Settings|Show Menubar</interface>. Then most of its contents become available through a <interface>Control</interface> button on the <emphasis>Toolbar</emphasis>.</para>"
msgstr ""
#. +> trunk5 stable5
-#: dolphinmainwindow.cpp:1973
+#: dolphinmainwindow.cpp:1974
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<para>This is the <emphasis>Toolbar</emphasis>. It allows quick access to frequently used actions.</para>"
"<para>It is highly customizable. All items you see in the <interface>Control</interface> menu or in the <interface>Menubar</interface> can be placed on the Toolbar. Just right-click on it and select <interface>Configure Toolbars…</interface> or find this action in the <interface>Control</interface> or <interface>Settings</interface> menu.</para>"
"<para>The location of the bar and the style of its buttons can also be changed in the right-click menu. Right-click a button if you want to show or hide its text.</para>"
msgstr ""
#. +> trunk5 stable5
-#: dolphinmainwindow.cpp:1985
+#: dolphinmainwindow.cpp:1986
#, kde-kuit-format
msgctxt "@info:whatsthis main view"
msgid ""
"<para>Here you can see the <emphasis>folders</emphasis> and <emphasis>files</emphasis> that are at the location described in the <interface>Location Bar</interface> above. This area is the central part of this application where you navigate to the files you want to use.</para>"
"<para>For an elaborate and general introduction to this application <link url='https://userbase.kde.org/Dolphin/File_Management#Introduction_to_Dolphin'>click here</link>. This will open an introductory article from the <emphasis>KDE UserBase Wiki</emphasis>.</para>"
"<para>For brief explanations of all the features of this <emphasis>view</emphasis> <link url='help:/dolphin/dolphin-view.html'>click here</link> instead. This will open a page from the <emphasis>Handbook</emphasis> that covers the basics.</para>"
msgstr ""
#. +> trunk5 stable5
-#: dolphinmainwindow.cpp:2001
+#: dolphinmainwindow.cpp:2002
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<para>This opens a window that lists the <emphasis>keyboard shortcuts</emphasis>.<nl/>"
"There you can set up key combinations to trigger an action when they are pressed simultaneously. All commands in this application can be triggered this way.</para>"
msgstr ""
#. +> trunk5 stable5
-#: dolphinmainwindow.cpp:2007
+#: dolphinmainwindow.cpp:2008
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<para>This opens a window in which you can change which buttons appear on the <emphasis>Toolbar</emphasis>.</para>"
"<para>All items you see in the <interface>Control</interface> menu or in the <interface>Menubar</interface> can also be placed on the Toolbar.</para>"
msgstr ""
#. +> trunk5 stable5
-#: dolphinmainwindow.cpp:2012
+#: dolphinmainwindow.cpp:2013
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid "This opens a window where you can change a multitude of settings for this application. For an explanation of the various settings go to the chapter <emphasis>Configuring Dolphin</emphasis> in <interface>Help|Dolphin Handbook</interface>."
msgstr ""
#. +> trunk5 stable5
-#: dolphinmainwindow.cpp:2030
+#: dolphinmainwindow.cpp:2031
#, kde-kuit-format
msgctxt "@info:whatsthis handbook"
msgid "<para>This opens the Handbook for this application. It provides explanations for every part of <emphasis>Dolphin</emphasis>.</para>"
msgstr ""
#. +> trunk5 stable5
-#: dolphinmainwindow.cpp:2035
+#: dolphinmainwindow.cpp:2036
#, kde-kuit-format
msgctxt "@info:whatsthis second half of handbook hb text without link"
msgid "<para>If you want more elaborate introductions to the different features of <emphasis>Dolphin</emphasis> go to the KDE UserBase Wiki.</para>"
msgstr ""
#. +> trunk5 stable5
-#: dolphinmainwindow.cpp:2040
+#: dolphinmainwindow.cpp:2041
#, kde-kuit-format
msgctxt "@info:whatsthis second half of handbook text with link"
msgid "<para>If you want more elaborate introductions to the different features of <emphasis>Dolphin</emphasis> <link url='https://userbase.kde.org/Dolphin/File_Management'>click here</link>. It will open the dedicated page in the KDE UserBase Wiki.</para>"
msgstr ""
#. +> trunk5 stable5
-#: dolphinmainwindow.cpp:2046
+#: dolphinmainwindow.cpp:2047
#, kde-kuit-format
msgctxt "@info:whatsthis whatsthis button"
msgid "<para>This is the button that invokes the help feature you are using right now! Click it, then click any component of this application to ask \"What's this?\" about it. The mouse cursor will change appearance if no help is available for a spot.</para>"
msgstr ""
#. +> trunk5 stable5
-#: dolphinmainwindow.cpp:2053
+#: dolphinmainwindow.cpp:2054
#, kde-kuit-format
msgctxt "@info:whatsthis second half of whatsthis button text without link"
msgid ""
"<para>There are two other ways to get help for this application: The <interface>Dolphin Handbook</interface> in the <interface>Help</interface> menu and the <emphasis>KDE UserBase Wiki</emphasis> article about <emphasis>File Management</emphasis> online.</para>"
"<para>The \"What's this?\" help is missing in most other windows so don't get too used to this.</para>"
msgstr ""
#. +> trunk5 stable5
-#: dolphinmainwindow.cpp:2061
+#: dolphinmainwindow.cpp:2062
#, kde-kuit-format
msgctxt "@info:whatsthis second half of whatsthis button text with link"
msgid ""
"<para>There are two other ways to get help: The <link url='help:/dolphin/index.html'>Dolphin Handbook</link> and the <link url='https://userbase.kde.org/Dolphin/File_Management'>KDE UserBase Wiki</link>.</para>"
"<para>The \"What's this?\" help is missing in most other windows so don't get too used to this.</para>"
msgstr ""
#. +> trunk5 stable5
-#: dolphinmainwindow.cpp:2067
+#: dolphinmainwindow.cpp:2068
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid "<para>This opens a window that will guide you through reporting errors or flaws in this application or in other KDE software.</para>"
msgstr ""
#. +> trunk5 stable5
-#: dolphinmainwindow.cpp:2074
+#: dolphinmainwindow.cpp:2075
#, kde-kuit-format
msgctxt "@info:whatsthis second half of reportbug text with link"
msgid "<para>High-quality bug reports are much appreciated. To learn how to make your bug report as effective as possible <link url='https://community.kde.org/Get_Involved/Bug_Reporting'>click here</link>.</para>"
msgstr ""
#. +> trunk5 stable5
-#: dolphinmainwindow.cpp:2079
+#: dolphinmainwindow.cpp:2080
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<para>This opens a <emphasis>web page</emphasis> where you can donate to support the continued work on this application and many other projects by the <emphasis>KDE</emphasis> community.</para>"
"<para>Donating is the easiest and fastest way to efficiently support KDE and its projects. KDE projects are available for free therefore your donation is needed to cover things that require money like servers, contributor meetings, etc.</para>"
"<para><emphasis>KDE e.V.</emphasis> is the non-profit organization behind the KDE community.</para>"
msgstr ""
#. +> trunk5 stable5
-#: dolphinmainwindow.cpp:2094
+#: dolphinmainwindow.cpp:2095
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"With this you can change the language this application uses.<nl/>"
"You can even set secondary languages which will be used if texts are not available in your preferred language."
msgstr ""
#. +> trunk5 stable5
-#: dolphinmainwindow.cpp:2101
+#: dolphinmainwindow.cpp:2102
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid "This opens a window that informs you about the version, license, used libraries and maintainers of this application."
msgstr ""
#. +> trunk5 stable5
-#: dolphinmainwindow.cpp:2108
+#: dolphinmainwindow.cpp:2109
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"This opens a window with information about <emphasis>KDE</emphasis>. The KDE community are the people behind this free software.<nl/>"
"If you like using this application but don't know about KDE or want to see a cute dragon have a look!"
msgstr ""
#. +> trunk5 stable5
#: dolphinpart.cpp:171
#, kde-format
msgctxt "@action:inmenu Edit"
msgid "&Edit File Type..."
msgstr "&Rediger filtype …"
#. +> trunk5 stable5
#: dolphinpart.cpp:175
#, kde-format
msgctxt "@action:inmenu Edit"
msgid "Select Items Matching..."
msgstr "Velg elementer som passer med …"
#. +> trunk5 stable5
#: dolphinpart.cpp:180
#, kde-format
msgctxt "@action:inmenu Edit"
msgid "Unselect Items Matching..."
msgstr "Fravelg elementer som passer med …"
#. +> trunk5 stable5
#: dolphinpart.cpp:186
#, kde-format
msgctxt "@action:inmenu Edit"
msgid "Unselect All"
msgstr "Fravelg alt"
#. +> trunk5 stable5
#: dolphinpart.cpp:203
#, kde-format
msgctxt "@action:inmenu Go"
msgid "App&lications"
msgstr "&Programmer"
#. +> trunk5 stable5
#: dolphinpart.cpp:206
#, kde-format
msgctxt "@action:inmenu Go"
msgid "&Network Folders"
msgstr "&Nettverksmapper"
#. +> trunk5 stable5
#: dolphinpart.cpp:209
#, kde-format
msgctxt "@action:inmenu Go"
msgid "Sett&ings"
msgstr "&Innstillinger"
#. +> trunk5 stable5
#: dolphinpart.cpp:212
#, kde-format
msgctxt "@action:inmenu Go"
msgid "Trash"
msgstr "Papirkurv"
#. +> trunk5 stable5
#: dolphinpart.cpp:215
#, kde-format
msgctxt "@action:inmenu Go"
msgid "Autostart"
msgstr "Autostart"
#. +> trunk5 stable5
#: dolphinpart.cpp:220
#, kde-format
msgctxt "@action:inmenu Tools"
msgid "Find File..."
msgstr "Finn fil …"
#. +> trunk5 stable5
#: dolphinpart.cpp:226
#, kde-format
msgctxt "@action:inmenu Tools"
msgid "Open &Terminal"
msgstr "Åpne &terminal"
#. +> trunk5 stable5
#: dolphinpart.cpp:296
#, kde-format
msgctxt "@title"
msgid "Dolphin Part"
msgstr "Dolphin-del"
#. +> trunk5 stable5
#: dolphinpart.cpp:490
#, kde-format
msgctxt "@title:window"
msgid "Select"
msgstr "Velg"
#. +> trunk5 stable5
#: dolphinpart.cpp:491
#, kde-format
msgid "Select all items matching this pattern:"
msgstr "Velg alle elementer som passer med dette mønsteret:"
#. +> trunk5 stable5
#: dolphinpart.cpp:497
#, kde-format
msgctxt "@title:window"
msgid "Unselect"
msgstr "Fravelg"
#. +> trunk5 stable5
#: dolphinpart.cpp:498
#, kde-format
msgid "Unselect all items matching this pattern:"
msgstr "Fravelg alle elementer som passer med dette mønsteret:"
#. i18n: ectx: Menu (edit)
#. +> trunk5 stable5
#: dolphinpart.rc:4
#, kde-format
msgid "&Edit"
msgstr "&Rediger"
#. i18n: ectx: Menu (selection)
#. +> trunk5 stable5
#: dolphinpart.rc:14
#, kde-format
msgctxt "@title:menu"
msgid "Selection"
msgstr "Utvalg"
#. i18n: ectx: Menu (view)
#. +> trunk5 stable5
#: dolphinpart.rc:23
#, kde-format
msgid "&View"
msgstr "&Vis"
#. i18n: ectx: Menu (go)
#. +> trunk5 stable5
#: dolphinpart.rc:32
#, kde-format
msgid "&Go"
msgstr "&Gå til"
#. i18n: ectx: Menu (tools)
#. +> trunk5 stable5
#: dolphinpart.rc:40
#, kde-format
msgctxt "@title:menu"
msgid "Tools"
msgstr "Verktøy"
#. i18n: ectx: ToolBar (mainToolBar)
#. +> trunk5 stable5
#: dolphinpart.rc:48
#, kde-format
msgctxt "@title:menu"
msgid "Dolphin Toolbar"
msgstr "Dolphin-verktøylinje"
#. +> trunk5 stable5
#: dolphinrecenttabsmenu.cpp:29
#, kde-format
msgid "Recently Closed Tabs"
msgstr "Nylig lukkede faner"
#. +> trunk5 stable5
#: dolphinrecenttabsmenu.cpp:34
#, kde-format
msgid "Empty Recently Closed Tabs"
msgstr "Tøm nylig lukkede faner"
#. +> trunk5 stable5
#: dolphintabbar.cpp:141
#, kde-format
msgctxt "@action:inmenu"
msgid "New Tab"
msgstr "Ny fane"
#. +> trunk5 stable5
#: dolphintabbar.cpp:142
#, kde-format
msgctxt "@action:inmenu"
msgid "Detach Tab"
msgstr "Koble fra fane"
#. +> trunk5 stable5
#: dolphintabbar.cpp:143
#, kde-format
msgctxt "@action:inmenu"
msgid "Close Other Tabs"
msgstr "Lukk andre faner"
#. +> trunk5 stable5
#: dolphintabbar.cpp:144
#, kde-format
msgctxt "@action:inmenu"
msgid "Close Tab"
msgstr "Lukk fane"
#. i18n: ectx: Menu (location_bar)
#. +> trunk5 stable5
#: dolphinui.rc:44
#, kde-format
msgctxt "@title:menu"
msgid "Location Bar"
msgstr "Adresselinje"
#. i18n: ectx: ToolBar (mainToolBar)
#. +> trunk5 stable5
#: dolphinui.rc:99
#, kde-format
msgctxt "@title:menu"
msgid "Main Toolbar"
msgstr "Hovedverktøylinje"
#. +> trunk5 stable5
#: dolphinviewcontainer.cpp:84
#, kde-kuit-format
msgctxt "@info:whatsthis location bar"
msgid ""
"<para>This line describes the location of the files and folders displayed below.</para>"
"<para>The name of the currently viewed folder can be read at the very right. To the left of it is the name of the folder that contains it. The whole line is called the <emphasis>path</emphasis> to the current location because following these folders from left to right leads here.</para>"
"<para>The path is displayed on the <emphasis>location bar</emphasis> which is more powerful than one would expect. To learn more about the basic and advanced features of the location bar <link url='help:/dolphin/location-bar.html'>click here</link>. This will open the dedicated page in the Handbook.</para>"
msgstr ""
#. +> trunk5 stable5
#: dolphinviewcontainer.cpp:109
#, kde-format
msgctxt "@action:button"
msgid "Empty Trash"
msgstr "Tøm papirkurven"
#. +> trunk5 stable5
#: dolphinviewcontainer.cpp:123
#, kde-kuit-format
msgctxt "@info:whatsthis findbar"
msgid ""
"<para>This helps you find files and folders. Enter a <emphasis>search term</emphasis> and specify search settings with the buttons at the bottom:"
"<list>"
"<item>Filename/Content: Does the item you are looking for contain the search terms within its filename or its contents?<nl/>"
"The contents of images, audio files and videos will not be searched.</item>"
"<item>From Here/Everywhere: Do you want to search in this folder and its sub-folders or everywhere?</item>"
"<item>More Options: Click this to search by media type, access time or rating.</item>"
"<item>More Search Tools: Install other means to find an item.</item>"
"</list>"
"</para>"
msgstr ""
#. +> trunk5 stable5
#: dolphinviewcontainer.cpp:143
#, kde-format
msgid "Running Dolphin as root can be dangerous. Please be careful."
msgstr "Det kan være farlig å kjøre Dolphin som rotbruker. Vær forsiktig."
msgctxt "Description for zoom-slider (accessibility)"
msgid "Sets the size of the file icons."
msgstr "Bestemmer størrelsen på fil-ikonene."
#. +> trunk5 stable5
#: statusbar/dolphinstatusbar.cpp:81
#, kde-format
msgid "Stop"
msgstr "Stopp"
#. +> trunk5 stable5
#: statusbar/dolphinstatusbar.cpp:83
#, kde-format
msgctxt "@tooltip"
msgid "Stop loading"
msgstr "Stopp lasting"
#. +> trunk5 stable5
#: statusbar/dolphinstatusbar.cpp:134
#, kde-kuit-format
msgctxt "@info:whatsthis Statusbar"
msgid ""
"<para>This is the <emphasis>Statusbar</emphasis>. It contains three elements by default (left to right):"
"<list>"
"<item>A <emphasis>text field</emphasis> that displays the size of selected items. If only one item is selected the name and type is shown as well.</item>"
"<item>A <emphasis>zoom slider</emphasis> that allows you to adjust the size of the icons in the view.</item>"
"<item><emphasis>Space information</emphasis> about the current storage device.</item>"
"</list>"
"</para>"
msgstr ""
#. +> trunk5 stable5
#: statusbar/dolphinstatusbar.cpp:275
#, kde-format
msgctxt "@action:inmenu"
msgid "Show Zoom Slider"
msgstr "Vis glidebryter for forstørring/forminsking"
#. +> trunk5 stable5
#: statusbar/dolphinstatusbar.cpp:279
#, kde-format
msgctxt "@action:inmenu"
msgid "Show Space Information"
msgstr "Vis plassinformasjon"
#. +> trunk5 stable5
#: statusbar/statusbarspaceinfo.cpp:99
#, kde-format
msgctxt "@info:status"
msgid "Unknown size"
msgstr "Ukjent størrelse"
#. +> trunk5 stable5
#: statusbar/statusbarspaceinfo.cpp:107
#, kde-format
msgctxt "@info:status Free disk space"
msgid "%1 free"
msgstr "%1 ledig"
#. +> trunk5 stable5
#: trash/dolphintrash.cpp:70
#, fuzzy, kde-format
#| msgctxt "Name"
#| msgid "Trash: Emptied"
msgid "Trash Emptied"
msgstr "Papirkurv: tømt"
#. +> trunk5 stable5
#: trash/dolphintrash.cpp:71
#, kde-format
msgid "The Trash was emptied."
msgstr ""
#. +> trunk5 stable5
#: views/dolphinremoteencoding.cpp:51
#, kde-format
msgid "Select Remote Charset"
msgstr "Velg fjerntegnsett"
#. +> trunk5 stable5
#: views/dolphinremoteencoding.cpp:115
#, kde-format
msgid "Reload"
msgstr "Last på nytt"
#. +> trunk5 stable5
#: views/dolphinremoteencoding.cpp:116
#, kde-format
msgid "Default"
msgstr "Standard"
#. +> trunk5 stable5
#: views/dolphinview.cpp:538
#, kde-format
msgctxt "@info:status"
msgid "1 Folder selected"
msgid_plural "%1 Folders selected"
msgstr[0] "1 mappe er valgt"
msgstr[1] "%1 mapper er valgt"
#. +> trunk5 stable5
#: views/dolphinview.cpp:539
#, kde-format
msgctxt "@info:status"
msgid "1 File selected"
msgid_plural "%1 Files selected"
msgstr[0] "1 fil er valgt"
msgstr[1] "%1 filer er valgt"
#. +> trunk5 stable5
#: views/dolphinview.cpp:543
#, kde-format
msgctxt "@info:status"
msgid "1 Folder"
msgid_plural "%1 Folders"
msgstr[0] "1 mappe"
msgstr[1] "%1 mapper"
#. +> trunk5 stable5
#: views/dolphinview.cpp:544
#, kde-format
msgctxt "@info:status"
msgid "1 File"
msgid_plural "%1 Files"
msgstr[0] "1 fil"
msgstr[1] "%1 filer"
#. +> trunk5 stable5
#: views/dolphinview.cpp:548
#, kde-format
msgctxt "@info:status folders, files (size)"
msgid "%1, %2 (%3)"
msgstr "%1, %2 (%3)"
#. +> trunk5 stable5
#: views/dolphinview.cpp:552
#, kde-format
msgctxt "@info:status files (size)"
msgid "%1 (%2)"
msgstr "%1 (%2)"
#. +> trunk5 stable5
#: views/dolphinview.cpp:558
#, kde-format
msgctxt "@info:status"
msgid "0 Folders, 0 Files"
msgstr "0 mapper, 0 filer"
#. +> trunk5 stable5
#: views/dolphinview.cpp:843
#, kde-format
msgid "Are you sure you want to open 1 item?"
msgid_plural "Are you sure you want to open %1 items?"
msgstr[0] "Er du sikker på at du vil åpne ett element?"
msgstr[1] "Er du sikker på at du vil åpne %1 elementer?"
#. +> trunk5 stable5
#: views/dolphinview.cpp:953
#, kde-format
msgctxt "@action:inmenu"
msgid "Automatic Column Widths"
msgstr "Automatiske kolonnebredder"
#. +> trunk5 stable5
#: views/dolphinview.cpp:958
#, kde-format
msgctxt "@action:inmenu"
msgid "Custom Column Widths"
msgstr "Tilpassede kolonnebredder"
#. +> trunk5 stable5
#: views/dolphinview.cpp:1477
#, kde-format
msgctxt "@info:status"
msgid "Trash operation completed."
msgstr "Søppelkurv-handlingen er fullført."
#. +> trunk5 stable5
#: views/dolphinview.cpp:1486
#, kde-format
msgctxt "@info:status"
msgid "Delete operation completed."
msgstr "Slettingen er fullført."
#. +> trunk5 stable5
#: views/dolphinview.cpp:1602
#, kde-format
msgctxt "@action:button"
msgid "Rename and Hide"
msgstr ""
#. +> trunk5 stable5
#: views/dolphinview.cpp:1605
#, kde-format
msgid ""
"Adding a dot to the beginning of this file's name will hide it from view.\n"
"Do you still want to rename it?"
msgstr ""
#. +> trunk5 stable5
#: views/dolphinview.cpp:1607
#, kde-format
msgid ""
"Adding a dot to the beginning of this folder's name will hide it from view.\n"
"Do you still want to rename it?"
msgstr ""
#. +> trunk5 stable5
#: views/dolphinview.cpp:1609
#, kde-format
msgid "Hide this File?"
msgstr ""
#. +> trunk5 stable5
#: views/dolphinview.cpp:1609
#, kde-format
msgid "Hide this Folder?"
msgstr ""
#. +> trunk5 stable5
#: views/dolphinview.cpp:1654
#, kde-format
msgctxt "@info:status"
msgid "The location is empty."
msgstr "Dette stedet er tomt."
#. +> trunk5 stable5
#: views/dolphinview.cpp:1656
#, kde-format
msgctxt "@info:status"
msgid "The location '%1' is invalid."
msgstr "Plasseringa «%1» er ugyldig."
#. +> trunk5 stable5
#: views/dolphinviewactionhandler.cpp:94
#, kde-format
msgctxt "@action"
msgid "Create Folder..."
msgstr "Lag mappe …"
#. +> trunk5 stable5
#: views/dolphinviewactionhandler.cpp:103
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"This renames the items in your current selection.<nl/>"
"Renaming multiple items at once amounts to their new names differing only in a number."
msgstr ""
#. +> trunk5 stable5
#: views/dolphinviewactionhandler.cpp:113
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"This moves the items in your current selection to the <filename>Trash</filename>.<nl/>"
"The trash is a temporary storage where items can be deleted from if disk space is needed."
msgstr ""
#. +> trunk5 stable5
#: views/dolphinviewactionhandler.cpp:124
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid "This deletes the items in your current selection completely. They can not be recovered by normal means."
msgstr ""
#. +> trunk5 stable5
#: views/dolphinviewactionhandler.cpp:134
#, kde-format
msgctxt "@action \"Move to Trash\" for non-local files, etc."
msgid "Delete (using shortcut for Trash)"
msgstr "Slett (bruker snarvei til Søppel)"
#. +> trunk5 stable5
#: views/dolphinviewactionhandler.cpp:141
#, kde-format
msgctxt "@action:inmenu File"
msgid "Properties"
msgstr "Egenskaper"
#. +> trunk5 stable5
#: views/dolphinviewactionhandler.cpp:143
#, kde-kuit-format
msgctxt "@info:whatsthis properties"
msgid ""
"This shows a complete list of properties of the currently selected items in a new window.<nl/>"
"If nothing is selected the window will be about the currently viewed folder instead.<nl/>"
"You can configure advanced options there like managing read- and write-permissions."
msgstr ""
#. +> trunk5 stable5
#: views/dolphinviewactionhandler.cpp:158
#, kde-kuit-format
msgctxt "@info:whatsthis Icons view mode"
msgid ""
"<para>This switches to a view mode that focuses on the folder and file icons. This mode makes it easy to distinguish folders from files and to detect items with distinctive <emphasis>file types</emphasis>.</para>"
"<para> This mode is handy to browse through pictures when the <interface>Preview</interface> option is enabled.</para>"
msgstr ""
#. +> trunk5
#: views/dolphinviewactionhandler.cpp:165
#, kde-kuit-format
msgctxt "@info:whatsthis Compact view mode"
msgid ""
"<para>This switches to a compact view mode that lists the folders and files in columns with the names beside the icons.</para>"
"<para>This helps to keep the overview in folders with many items.</para>"
msgstr ""
#. +> stable5
#: views/dolphinviewactionhandler.cpp:165
#, kde-kuit-format
msgctxt "@info:whatsthis Compact view mode"
msgid ""
"<para>This switches to a compact view mode that lists the folders and files in columns with the names beside the icons. "
"<para></para>"
"This helps to keep the overview in folders with many items.</para>"
msgstr ""
#. +> trunk5 stable5
#: views/dolphinviewactionhandler.cpp:169
#, kde-kuit-format
msgctxt "@info:whatsthis Details view mode"
msgid ""
"<para>This switches to a list view mode that focuses on folder and file details.</para>"
"<para>Click on a detail in the column header to sort the items by it. Click again to sort the other way around. To select which details should be displayed click the header with the right mouse button.</para>"
"<para>You can view the contents of a folder without leaving the current location by clicking to the left of it. This way you can view the contents of multiple folders in the same list.</para>"
msgstr ""
#. +> trunk5 stable5
#: views/dolphinviewactionhandler.cpp:179
#, kde-format
msgctxt "@action:intoolbar"
msgid "View Mode"
msgstr "Visningsmodus"
#. +> trunk5 stable5
#: views/dolphinviewactionhandler.cpp:189
#, fuzzy, kde-format
#| msgid "This increases the display font size."
msgctxt "@info:whatsthis zoom in"
msgid "This increases the icon size."
msgstr "Dette øker skriftstørrelsen på skjermen."
#. +> trunk5
#: views/dolphinviewactionhandler.cpp:192
#, fuzzy, kde-format
#| msgid "Reset Zoom"
msgctxt "@action:inmenu View"
msgid "Reset Zoom Level"
msgstr "Tilbakestill"
#. +> trunk5
#: views/dolphinviewactionhandler.cpp:193
#, kde-format
msgid "Zoom To Default"
msgstr ""
#. +> trunk5
#: views/dolphinviewactionhandler.cpp:194
#, kde-format
msgctxt "@info:whatsthis zoom reset"
msgid "This resets the icon size to default."
msgstr ""
#. +> trunk5
#: views/dolphinviewactionhandler.cpp:202
#, kde-format
msgctxt "@info:whatsthis zoom out"
msgid "This reduces the icon size."
msgstr ""
#. +> stable5
#: views/dolphinviewactionhandler.cpp:194
#, kde-format
msgctxt "@info:whatsthis zoom in"
msgid "This reduces the icon size."
msgstr ""
-#. +> trunk5 stable5
+#. +> trunk5
#: views/dolphinviewactionhandler.cpp:205
+#, fuzzy, kde-format
+#| msgid "Show Previews"
+msgctxt "@action:intoolbar"
+msgid "Show Previews"
+msgstr "Vis forhåndsvisninger"
+
+#. +> stable5
+#: views/dolphinviewactionhandler.cpp:197
#, kde-format
msgctxt "@action:intoolbar"
msgid "Preview"
msgstr "Forhåndsvisning"
#. +> trunk5 stable5
#: views/dolphinviewactionhandler.cpp:206
#, kde-format
msgctxt "@info"
msgid "Show preview of files and folders"
msgstr "Vis forhåndsvisning av filer og mapper"
#. +> trunk5 stable5
#: views/dolphinviewactionhandler.cpp:207
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"When this is enabled, the icons are based on the actual file or folder contents.<nl/>"
"For example the icons of images become scaled down versions of the images."
msgstr ""
#. +> trunk5 stable5
#: views/dolphinviewactionhandler.cpp:215
#, kde-format
msgctxt "@action:inmenu Sort"
msgid "Folders First"
msgstr "Mapper først"
#. +> trunk5 stable5
#: views/dolphinviewactionhandler.cpp:223
#, kde-format
msgctxt "@action:inmenu View"
msgid "Sort By"
msgstr "Sorter etter"
-#. +> trunk5 stable5
+#. +> trunk5
#: views/dolphinviewactionhandler.cpp:256
+#, fuzzy, kde-format
+#| msgctxt "@action:inmenu View"
+#| msgid "Additional Information"
+msgctxt "@action:inmenu View"
+msgid "Show Additional Information"
+msgstr "Tilleggsinformasjon"
+
+#. +> stable5
+#: views/dolphinviewactionhandler.cpp:248
#, kde-format
msgctxt "@action:inmenu View"
msgid "Additional Information"
msgstr "Tilleggsinformasjon"
#. +> trunk5 stable5
-#: views/dolphinviewactionhandler.cpp:265
+#: views/dolphinviewactionhandler.cpp:266
#, kde-format
msgctxt "@action:inmenu View"
msgid "Show in Groups"
msgstr "Vis i grupper"
#. +> trunk5 stable5
-#: views/dolphinviewactionhandler.cpp:266
+#: views/dolphinviewactionhandler.cpp:267
#, kde-format
msgctxt "@info:whatsthis"
msgid "This groups files and folders by their first letter."
msgstr ""
-#. +> trunk5 stable5
-#: views/dolphinviewactionhandler.cpp:270
+#. +> trunk5
+#: views/dolphinviewactionhandler.cpp:271
+#, fuzzy, kde-format
+#| msgid "Show Hidden Files"
+msgctxt "@action:inmenu View"
+msgid "Show Hidden Files"
+msgstr "Vis skjulte filer"
+
+#. +> stable5
+#: views/dolphinviewactionhandler.cpp:262
#, kde-format
msgctxt "@action:inmenu View"
msgid "Hidden Files"
msgstr "Skjulte filer"
#. +> trunk5 stable5
-#: views/dolphinviewactionhandler.cpp:271
+#: views/dolphinviewactionhandler.cpp:272
#, kde-format
msgctxt "@info"
msgid "Visibility of hidden files and folders"
msgstr "Synlighet for skjulte filer og mapper"
#. +> trunk5 stable5
-#: views/dolphinviewactionhandler.cpp:272
+#: views/dolphinviewactionhandler.cpp:273
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<para>When this is enabled <emphasis>hidden</emphasis> files and folders are visible. They will be displayed semi-transparent.</para>"
"<para>Hidden items only differ from other ones in that their name starts with a \".\". In general there is no need for users to access them which is why they are hidden.</para>"
msgstr ""
#. +> trunk5 stable5
-#: views/dolphinviewactionhandler.cpp:282
+#: views/dolphinviewactionhandler.cpp:283
#, kde-format
msgctxt "@action:inmenu View"
msgid "Adjust View Properties..."
msgstr "Juster visningsegenskapene …"
#. +> trunk5 stable5
-#: views/dolphinviewactionhandler.cpp:283
+#: views/dolphinviewactionhandler.cpp:285
#, kde-format
msgctxt "@info:whatsthis"
msgid "This opens a window in which all folder view properties can be adjusted."
msgstr ""
#. +> trunk5 stable5
-#: views/dolphinviewactionhandler.cpp:568
+#: views/dolphinviewactionhandler.cpp:570
#, kde-format
msgctxt "@action:inmenu View Mode"
msgid "Icons"
msgstr "Ikoner"
#. +> trunk5 stable5
-#: views/dolphinviewactionhandler.cpp:569
+#: views/dolphinviewactionhandler.cpp:571
#, kde-format
msgctxt "@info"
msgid "Icons view mode"
msgstr "Ikonvisning"
#. +> trunk5 stable5
-#: views/dolphinviewactionhandler.cpp:579
+#: views/dolphinviewactionhandler.cpp:581
#, kde-format
msgctxt "@action:inmenu View Mode"
msgid "Compact"
msgstr "Kompakt"
#. +> trunk5 stable5
-#: views/dolphinviewactionhandler.cpp:580
+#: views/dolphinviewactionhandler.cpp:582
#, kde-format
msgctxt "@info"
msgid "Compact view mode"
msgstr "Kompakt visningsmåte"
#. +> trunk5 stable5
-#: views/dolphinviewactionhandler.cpp:590
+#: views/dolphinviewactionhandler.cpp:592
#, kde-format
msgctxt "@action:inmenu View Mode"
msgid "Details"
msgstr "Detaljer"
#. +> trunk5 stable5
-#: views/dolphinviewactionhandler.cpp:591
+#: views/dolphinviewactionhandler.cpp:593
#, kde-format
msgctxt "@info"
msgid "Details view mode"
msgstr "Detaljert visning"
#. +> trunk5 stable5
-#: views/dolphinviewactionhandler.cpp:614
+#: views/dolphinviewactionhandler.cpp:616
#, kde-format
msgctxt "Sort descending"
msgid "Z-A"
msgstr ""
#. +> trunk5 stable5
-#: views/dolphinviewactionhandler.cpp:615
+#: views/dolphinviewactionhandler.cpp:617
#, kde-format
msgctxt "Sort ascending"
msgid "A-Z"
msgstr ""
#. +> trunk5 stable5
-#: views/dolphinviewactionhandler.cpp:617
+#: views/dolphinviewactionhandler.cpp:619
#, kde-format
msgctxt "Sort descending"
msgid "Largest first"
msgstr ""
#. +> trunk5 stable5
-#: views/dolphinviewactionhandler.cpp:618
+#: views/dolphinviewactionhandler.cpp:620
#, kde-format
msgctxt "Sort ascending"
msgid "Smallest first"
msgstr ""
#. +> trunk5 stable5
-#: views/dolphinviewactionhandler.cpp:620
+#: views/dolphinviewactionhandler.cpp:622
#, fuzzy, kde-format
#| msgid "Show &Newest First"
msgctxt "Sort descending"
msgid "Newest first"
msgstr "Vis &nyeste først"
#. +> trunk5 stable5
-#: views/dolphinviewactionhandler.cpp:621
+#: views/dolphinviewactionhandler.cpp:623
#, fuzzy, kde-format
#| msgid "Show oldest first"
msgctxt "Sort ascending"
msgid "Oldest first"
msgstr "Vis eldste først"
#. +> trunk5 stable5
-#: views/dolphinviewactionhandler.cpp:623
+#: views/dolphinviewactionhandler.cpp:625
#, fuzzy, kde-format
#| msgid "Highest"
msgctxt "Sort descending"
msgid "Highest first"
msgstr "Høyeste"
#. +> trunk5 stable5
-#: views/dolphinviewactionhandler.cpp:624
+#: views/dolphinviewactionhandler.cpp:626
#, fuzzy, kde-format
#| msgid "Show oldest first"
msgctxt "Sort ascending"
msgid "Lowest first"
msgstr "Vis eldste først"
#. +> trunk5 stable5
-#: views/dolphinviewactionhandler.cpp:626
+#: views/dolphinviewactionhandler.cpp:628
#, fuzzy, kde-format
#| msgid "Descending"
msgctxt "Sort descending"
msgid "Descending"
msgstr "Synkende"
#. +> trunk5 stable5
-#: views/dolphinviewactionhandler.cpp:627
+#: views/dolphinviewactionhandler.cpp:629
#, fuzzy, kde-format
#| msgid "Ascending"
msgctxt "Sort ascending"
msgid "Ascending"
msgstr "Stigende"
#. +> trunk5 stable5
#: views/renamedialog.cpp:55
#, kde-format
msgctxt "@title:window"
msgid "Rename Item"
msgstr "Endre navn på element"
#. +> trunk5 stable5
#: views/renamedialog.cpp:56
#, kde-format
msgctxt "@title:window"
msgid "Rename Items"
msgstr "Gi elementene nye navn"
#. +> trunk5 stable5
#: views/renamedialog.cpp:68
#, kde-format
msgctxt "@action:button"
msgid "&Rename"
msgstr "Gi &nytt navn"
#. +> trunk5 stable5
#: views/renamedialog.cpp:79
#, kde-kuit-format
msgctxt "@label:textbox"
msgid "Rename the item <filename>%1</filename> to:"
msgstr "Elementet <filename>%1</filename> endrer navn til:"
#. +> trunk5 stable5
#: views/renamedialog.cpp:83
#, kde-format
msgctxt "@info:status"
msgid "New name #"
msgstr "Nytt navn #"
#. +> trunk5 stable5
#: views/renamedialog.cpp:85
#, kde-format
msgctxt "@label:textbox"
msgid "Rename the %1 selected item to:"
msgid_plural "Rename the %1 selected items to:"
msgstr[0] "Gi det %1 valgte elementet nytt navn:"
msgstr[1] "Gi de %1 valgte elementene nye navn:"
#. +> trunk5 stable5
#: views/renamedialog.cpp:130
#, kde-format
msgctxt "@info"
msgid "# will be replaced by ascending numbers starting with:"
msgstr "# erstattes av stigende tall som begynner med:"
msgctxt "%1 is the error count string, %2 the warning count string"
msgid "%1, %2"
msgstr "%1, %2"
-#. +> trunk5 stable5
+#. +> stable5
#: plugin_validators.cpp:364
#, kde-format
msgid "HTML tidy results:"
msgstr "Resultat av HTML tidy:"
-#. +> trunk5 stable5
+#. +> stable5
#: plugin_validators.cpp:376
#, kde-format
msgctxt "%1 is the error count string, %2 the warning count string, %3 the accessibility warning string"
msgid "Page: %1, %2, %3"
msgstr "Side: %1, %2, %3"
-#. +> trunk5 stable5
+#. +> stable5
#: plugin_validators.cpp:382
#, kde-format
msgctxt "%1 is the error count string, %2 the warning count string"
msgid "Page: %1, %2"
msgstr "Side: %1, %2"
-#. +> trunk5 stable5
+#. +> stable5
#: plugin_validators.cpp:391
#, kde-format
msgctxt "%1 is the HTML frame name, %2 is the error count string, %3 the warning count string, %4 the accessibility warning string"
msgid "Frame '%1': %2, %3, %4"
msgstr "Ramme «%1»: %2, %3, %4"
-#. +> trunk5 stable5
+#. +> stable5
#: plugin_validators.cpp:399
#, kde-format
msgctxt "%1 is the HTML frame name, %2 is the error count string, %3 the warning count string"
msgid "Frame '%1': %2, %3"
msgstr "Ramme «%1»: %2, %3"
-#. +> trunk5 stable5
+#. +> stable5
#: plugin_validators.cpp:447
#, kde-format
msgid "<qt>The selected URL cannot be verified because it contains a password. Sending this URL to <b>%1</b> would put the security of <b>%2</b> at risk.</qt>"
msgstr "<qt> Den valgte URL-en kan ikke sjekkes fordi den inneholder et passord. Det er en fare for sikkerheten til <b>%2</b> å sende denne URL-en til <b>%1</b>.</qt>"
-#. +> trunk5 stable5
+#. +> stable5
#: plugin_validators.cpp:519
#, kde-format
msgctxt "@title:window"
msgid "Cannot Validate Source"
msgstr "Kan ikke sjekke kilde for gyldighet"
-#. +> trunk5 stable5
+#. +> stable5
#: plugin_validators.cpp:520
#, kde-format
msgid "You cannot validate anything except web pages with this plugin."
msgstr "Du kan ikke sjekke gyldigheten til noe annet enn nettsider med dette programtillegget."
-#. +> trunk5 stable5
+#. +> stable5
#: plugin_validators.cpp:530
#, kde-format
msgctxt "@title:window"
msgid "Malformed URL"
msgstr "Feil i URL"
-#. +> trunk5 stable5
+#. +> stable5
#: plugin_validators.cpp:531
#, kde-format
msgid "The URL you entered is not valid, please correct it and try again."
msgstr "URL-en du skrev inn er ikke gyldig, rett på den og prøv på nytt."
msgid "<em>Note:</em> To view these pages when you are in other parts of Plan, choose the menu option <em>Help -> Introduction to Plan</em>."
msgstr "<em>Merk:</em> Velg menyinnslaget <em>Hjelp→Innføring i Plan</em> for å se disse sidene når du er i andre deler av Plan."
#. +> trunk5 stable5
#: about/aboutpage.cpp:117
#, fuzzy, kde-format
#| msgid ""
#| "Plan is intended for managing moderately large projects with multiple resources. To enable you to model your project adequately, Plan offers different types of task dependencies and timing constraints. Usually you will define your tasks, estimate the effort needed to perform each task, allocate resources and then schedule the project according to the dependency network and resource availability."
#| "<p>You can find more information in the <a href=\"help:plan\">documentation</a> or online at <a href=\"http://www.calligra.org/plan\">http://www.calligra.org/plan</a></p>"
msgid ""
"Plan is intended for managing moderately large projects with multiple resources. To enable you to model your project adequately, Plan offers different types of task dependencies and timing constraints. Usually you will define your tasks, estimate the effort needed to perform each task, allocate resources and then schedule the project according to the dependency network and resource availability."
"<p>You can find more information online at <a href=\"https://userbase.kde.org/Plan\">https://userbase.kde.org/Plan</a></p>"
msgstr ""
"Plan er et prosjektstyringsprogram ment å styre prosjekter av moderat størrelse, med flere ressurser. Plan har flere typer avhengigheter mellom oppgaver, og flere tidsbeskrankinger. Vanligvis vil du definere oppgavene, estimere innsatsen som kreves for hver oppgave, tilordne ressurser, og så planlegge prosjektet etter avhengigheter mellom oppgaver og tilgjengelighet på ressurser. "
"<p>Du kan finne mer informasjon i <a href=\"help:plan\">dokumentasjonen</a> eller på nettet ved <a href=\"http://www.calligra.org/plan\">http://www.calligra.org/plan</a></p>"
#. +> trunk5 stable5
#: about/aboutpage.cpp:123
#, kde-format
msgid "Next: Tips"
msgstr "Neste: Tips"
#. +> trunk5 stable5
#: about/aboutpage.cpp:173
#, kde-format
msgid "Editing tips."
msgstr "Tips for redigering."
#. +> trunk5 stable5
#: about/aboutpage.cpp:175
#, kde-format
msgid ""
"<br/>"
"<b>To</b> edit project data, different views and editors can be selected in the View Selector docker.<br/>"
"<b>The</b> views are generally used to inspect data after the project has been scheduled. No data will appear in the views if the project has not been scheduled. Scheduling is done in the Schedules editor.<br/>"
"<b>You</b> can edit attributes in the various editors by selecting the item you want to edit (doubleclick or press F2), or open a dialog using the context menu.</ul>"
msgstr ""
"<br/>"
" <b>Prosjektdata</b> kan redigeres ved å velge forskjellige visninger og redigeringsprogrammer i Visningsvelger.<br/>"
" <b>Visningene</b> brukes generelt til å undersøke data etter at prosjektet er tidsplanlagt. Hvis dette ikke er gjort synes ingen data i visningene. Tidsplanlegging gjøres i Tidsplaner-redigereren.<br/>"
" <b>Du</b> kan redigere attributter i de forskjellige redigeringene ved å markere det elementet du vil endre (dobbeltklikk eller trykk F2), eller åpne en dialog ved å bruke kontekstmenyen.</ul>"
#. +> trunk5 stable5
#: about/aboutpage.cpp:183
#, kde-format
msgid "Next: Create a simple project"
msgstr "Neste: opprett et enkelt prosjekt"
#. +> trunk5 stable5
#: about/aboutpage.cpp:232
#, kde-format
msgid "Create the simplest project ever."
msgstr "Opprett det enklest mulige prosjektet."
#. +> trunk5 stable5
#: about/aboutpage.cpp:234
#, fuzzy, kde-format
#| msgctxt "1=datetime"
#| msgid ""
#| "Select the task editor <em>Editors->Tasks</em>:"
#| "<ul>"
#| "<li>Create a task by selecting <em>Add Task</em> in the toolbar.</li>"
#| "<li>Set <em>Type</em> to <em>Duration</em>.</li>"
#| "<li>Set <em>Estimate</em> to <em>8 hours</em>.</li>"
#| "<li>Set <em>Constraint</em> to <em>As Soon As Possible</em>.</li>"
#| "</ul>"
#| "Select the schedules editor <em>Editors->Schedules</em>:"
#| "<ul>"
#| "<li>Create a schedule by selecting <em>Add Schedule</em> in the toolbar.</li>"
#| "<li>Calculate the schedule by selecting <em>Calculate</em> in the toolbar.</li>"
#| "</ul>"
#| "The task should now have been scheduled to start %1 with a duration of 8 hours. You can check this by selecting the gantt chart <em>Views->Gantt</em>."
msgctxt "1=datetime"
msgid ""
"Select the task editor <em>Editors->Tasks</em>:"
"<ul>"
"<li>Create a task by selecting <em>Add Task</em> in the toolbar.</li>"
"<li>Set <em>Type</em> to <em>Duration</em>.</li>"
"<li>Set <em>Estimate</em> to <em>8 hours</em>.</li>"
"<li>Set <em>Constraint</em> to <em>As Soon As Possible</em>.</li>"
"</ul>"
"Select the schedules editor <em>Editors->Schedules</em>:"
"<ul>"
"<li>Create a schedule by selecting <em>Add Schedule</em> in the toolbar.</li>"
"<li>Calculate the schedule by selecting <em>Calculate</em> in the toolbar.</li>"
"</ul>"
"The task should now have been scheduled to start %1 with a duration of 8 hours. You can check this by selecting the Gantt chart <em>Views->Gantt</em>."
"<li>Opprett en tidsplan ved å velge <em>Legg til tidsplan</em> i verktøylinja.</li>"
"<li>Beregn tidsplanen ved å velge <em>Beregn</em> i verktøylinja. </li>"
" </ul>"
"Oppgaven skulle nå være planlagt å starte %1 med en varighet på 8 timer. Du kan kontrollere dette ved å velge gantt-diagrammet <em>Visninger→Gantt</em>."
#. +> trunk5 stable5
#: about/aboutpage.cpp:250
#, kde-format
msgid "Next: Resource allocation"
msgstr "Neste: Ressurstildeling"
#. +> trunk5 stable5
#: about/aboutpage.cpp:261
#, kde-format
msgid "Allocate a resource to the task."
msgstr "Tilordne en ressurs til oppgaven."
#. +> trunk5 stable5
#: about/aboutpage.cpp:263
#, fuzzy, kde-format
#| msgctxt "1=datetime"
#| msgid ""
#| "Select the task editor <em>Editors->Tasks</em>:"
#| "<ul>"
#| "<li>Enter a name (e.g. 'John') in the <em>Allocation</em> column. (Plan will automatically create a resource with name 'John' under resource group 'Resources'.</li>"
#| "<li>Set <em>Type</em> to <em>Effort</em>.</li>"
#| "</ul>"
#| "Now you need to schedule the project again with the new allocation:<br/>"
#| "Select the schedules editor <em>Editors->Schedules</em> and calculate the schedule by selecting <em>Calculate</em> in the toolbar."
#| "<p>The task should be scheduled to start %1 with a duration of 8 hours. You can check this by selecting the gantt chart <em>Views->Gantt</em>."
#| "<p>"
msgctxt "1=datetime"
msgid ""
"Select the task editor <em>Editors->Tasks</em>:"
"<ul>"
"<li>Enter a name (e.g. 'John') in the <em>Allocation</em> column. (Plan will automatically create a resource with name 'John' under resource group 'Resources'.</li>"
"<li>Set <em>Type</em> to <em>Effort</em>.</li>"
"</ul>"
"Now you need to schedule the project again with the new allocation:<br/>"
"Select the schedules editor <em>Editors->Schedules</em> and calculate the schedule by selecting <em>Calculate</em> in the toolbar."
"<p>The task should be scheduled to start %1 with a duration of 8 hours. You can check this by selecting the Gantt chart <em>Views->Gantt</em>."
"<li>Oppgi et navn (f.eks. «Axel») i kolonnen <em>Tilordning</em> . (Plan oppretter automatisk en ressurs med navnet «Axel» i ressursgruppe «Ressurser».)</li>"
"<li>Sett <em>Type</em> til <em>Innsats</em>.</li>"
" </ul>"
" Nå må du planlegge prosjektet igjen med den nye tilordningen:<br/>"
" Velg tidsplanredigerer <em>Redigeringer→Tidsplaner</em> og beregn tidsplanen ved å velge <em>Beregn</em> i verktøylinja. "
"<p>Oppgaven skulle nå være planlagt å starte %1 med en varighet på 8 timer. Du kan kontrollere dette ved å velge gantt-diagrammet <em>Visninger→Gantt</em>. "
"<p>"
#. +> trunk5 stable5
#: about/aboutpage.cpp:274
#, kde-format
msgid "Next: Introduction"
msgstr "Neste: Innføring"
#. i18n: ectx: Menu (file)
#. +> trunk5 stable5
#: calligraplan.rc:4
#, kde-format
msgid "&File"
msgstr "&Fil"
#. i18n: ectx: Menu (edit)
#. +> trunk5 stable5
#: calligraplan.rc:9
#, kde-format
msgid "&Edit"
msgstr "&Rediger"
#. i18n: ectx: Menu (view)
#. +> trunk5 stable5
#: calligraplan.rc:20 calligraplan_readonly.rc:4
#, kde-format
msgid "&View"
msgstr "&Visning"
#. i18n: ectx: Menu (project)
#. +> trunk5 stable5
#: calligraplan.rc:27
#, kde-format
msgid "&Project"
msgstr "&Prosjekt"
#. i18n: ectx: ToolBar (project)
#. +> stable5
#: calligraplan.rc:65
#, kde-format
msgid "Project"
msgstr "Prosjekt"
#. i18n: ectx: Menu (tools)
#. +> trunk5 stable5
#: calligraplan.rc:35
#, kde-format
msgid "&Tools"
msgstr "Verk&tøy"
#. i18n: ectx: Menu (settings)
#. +> trunk5 stable5
#: calligraplan.rc:40
#, kde-format
msgid "&Settings"
msgstr "Inn&stillinger"
#. i18n: ectx: Menu (help)
#. +> trunk5 stable5
#: calligraplan.rc:43
#, kde-format
msgid "&Help"
msgstr "&Hjelp"
#. i18n: ectx: ToolBar (edit)
#. +> trunk5
#: calligraplan.rc:47
#, fuzzy, kde-format
#| msgctxt "Menu"
#| msgid "Edit"
msgid "Edit"
msgstr "Rediger"
#. i18n: ectx: label, entry (HoursPrYear), group (EstimateConversion)
#. +> trunk5 stable5
#: calligraplansettings.kcfg:9
#, fuzzy, kde-format
#| msgid "Hours per year:"
msgid "Hours per year"
msgstr "Timer per år:"
#. i18n: ectx: label, entry (HoursPrMonth), group (EstimateConversion)
#. +> trunk5 stable5
#: calligraplansettings.kcfg:13
#, fuzzy, kde-format
#| msgid "Hours per month:"
msgid "Hours per month"
msgstr "Timer per måned:"
#. i18n: ectx: label, entry (HoursPrWeek), group (EstimateConversion)
#. +> trunk5 stable5
#: calligraplansettings.kcfg:17
#, fuzzy, kde-format
#| msgid "Hours per week:"
msgid "Hours per week"
msgstr "Timer per uke:"
#. i18n: ectx: label, entry (HoursPrDay), group (EstimateConversion)
#. +> trunk5 stable5
#: calligraplansettings.kcfg:21
#, fuzzy, kde-format
#| msgid "Hours per day:"
msgid "Hours per day"
msgstr "Timer per dag:"
#. i18n: ectx: label, entry (GenerateWeek), group (CalendarGeneration)
#. +> trunk5 stable5
#: calligraplansettings.kcfg:27
#, fuzzy, kde-format
#| msgid "Generating Key"
msgid "Generate working week"
msgstr "Lager nøkkel"
#. i18n: ectx: label, entry (GenerateWeekChoice), group (CalendarGeneration)
"This is not limited to persons available in a resource group but can be anyone. You can even directly access your address book with the Choose button."
msgstr ""
"Personen som er ansvarlig for denne oppgaven.\n"
"\n"
"Dette er ikke begrenset til personer som finnes i en ressursgruppe, men kan være hvem som helst. Med Velg-knappen kan du tilmed hente adresseboka direkte."
"<p>Values used for generating default calendars for working weeks and holidays.</p>"
"<p>The <span style=\" font-style:italic;\">Week</span> calendar uses the values defined in <span style=\" font-style:italic;\">Working week</span>.</p>"
"<p>The <span style=\" font-style:italic;\">Week</span> calendar can be <span style=\" font-style:italic;\">Always</span> generated or only generated <span style=\" font-style:italic;\">If none exists</span>. The latter choice is the most common as you often have calendars defined as part of templates or shared resources.</p>"
"<p><span style=\" font-style:italic;\">Holidays</span> can be generated for your region (default) or any region you choose. The holidays can be added into the week calendar, as sub-calendar to the week calendar or as a separate calendar.</p>"
"<p>If a week calendar is not generated, the holidays are put into a separate calendar.</p>"
"These values are used if your estimate is not in hours.\n"
"Let us say Hours per day is 8. If you estimate that a task needs 3 days effort to complete, this is converted to 24 hours when the task is scheduled. The actual time it will take to complete is of course dependent on the availability of the person (or persons) that is assigned to the task."
msgstr ""
"Disse verdiene brukes hvis ditt estimat ikke er i timer.\n"
"Hvis antall timer per dag er 8, og oppgaven er estimert til 3 dager å fullføre, så blir dette omgjort til 24 timer når oppgaven planlegges. Den virkelige tiden det tar til fullføring er naturligvis avhengig av hvor tilgjengelig(e) personen(e) tilordnet oppaven er."
"<para>The network scheduler generally schedules tasks according to their dependencies. When a task is scheduled it is scheduled in full, booking the allocated resources if available. If overbooking is not allowed, subsequent tasks that requests the same resource will be scheduled later in time.</para>"
"<para>Tasks with time constraints will be scheduled first to minimize the problem with resource conflicts</para>"
"<para><note>This scheduler does not handle resource conflicts well.<nl/>"
"You can try a different scheduler if available. You may also change resource allocations or add dummy dependencies to avoid the conflicts.</note></para>"
msgstr ""
"<title>Nettverksplanlegger (PERT)</title>"
" "
"<para>Nettverksplanleggeren planlegger i alminnelighet oppgaver i følge deres avhengigheter. Når en oppgave planlegges blir det gjort fullstendig, tilordnede ressurser blir bestilt vis de er tilgjengelige. Hvis overbestilling ikke er tillatt, så vil etterfølgende oppgaver som trenger samme ressurs forskjøvet framover i tid.</para>"
" "
"<para>Oppgaver med tidsskranker blir planlagt først for å minske problemer med ressurskonflikter.</para>"
" "
"<para><note>Denne planleggeren håndterer ikke ressurkonflikter godt.<nl/>"
" Du kan forsøke en annen planlegger hvis tilgjengelig. Du kan også endre ressurstilordninger eller legge til tomme avhengigheter for å unngå konfliktene.</note></para>"
msgid "Defines when the resource is available to the project"
msgstr "Bestemmer når ressursen er tilgjengelig for prosjektet"
#. +> trunk5 stable5
#: models/kptcommonstrings.cpp:123
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "The cost pr hour, normal hours"
msgstr "Kostnad pr time, normal arbeidstid"
#. +> trunk5 stable5
#: models/kptcommonstrings.cpp:124
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "The cost pr hour, overtime hours"
msgstr "Kostnad pr time, overtid"
#. +> trunk5 stable5
#: models/kptcommonstrings.cpp:125
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "The fixed cost"
msgstr "Fast kostnad"
#. +> trunk5 stable5
#: models/kptcommonstrings.cpp:126
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "The account where the resource cost is accumulated"
msgstr "Kontoen der ressurskostnaden samles opp"
#. +> trunk5 stable5
#: models/kptcommonstrings.cpp:128
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "The name of the account"
msgstr "Navn på kontoen"
#. +> trunk5 stable5
#: models/kptcommonstrings.cpp:129
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "The description of the account"
msgstr "Beskrivelse av kontoen"
#. +> trunk5
#: models/kptcommonstrings.cpp:131
#, fuzzy, kde-kuit-format
#| msgctxt "@info:tooltip"
#| msgid "The name of the schedule"
msgctxt "@info:tooltip"
msgid "The name and scheduling mode of the schedule"
msgstr "Navn på tidsplanen"
#. +> trunk5 stable5
#: models/kptcommonstrings.cpp:132
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "The schedules state"
msgstr "Planens status"
#. +> trunk5 stable5
#: models/kptcommonstrings.cpp:134
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "Controls resource overbooking when scheduling"
msgstr "Kontrollerer ressursoverbooking under planleggingen"
#. +> trunk5 stable5
#: models/kptcommonstrings.cpp:136
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<para>Controls resource overbooking when scheduling.</para>"
"<para>If overbooking is allowed, a resource may be booked (on working days) to work more than it is available. This can happen if the resource is allocated to multiple tasks or are booked on other projects.</para>"
"<para>If overbooking is to be avoided, resources will not be booked more than they are available. On resource conflict, tasks will be delayed until the resource is available.</para>"
msgstr ""
"<para>Styrer overbestilling av ressurser under planlegging.</para>"
"<para> Hvis overbestilling er tillatt, så kan en ressurs være bestilt (på arbeidsdager) til å arbeide mer enn det som er tilgjengelig. Dette kan hende dersom ressursen er tilordnet til flere oppgaver eller er bestilt på flere prosjekter.</para>"
"<para>Hvis overbestilling skal unngås vil ressurser ikke bli bestilt mer enn de er tilgjengelig for. Ved konflikt vil oppgaver blir forsinket til ressuren er tilgjengelig.</para>"
" "
#. +> trunk5 stable5
#: models/kptcommonstrings.cpp:142
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "The distribution to be used during scheduling"
msgstr "Fordelingen som skal brukes under planleggingen"
#. +> trunk5 stable5
#: models/kptcommonstrings.cpp:144
#, fuzzy, kde-kuit-format
#| msgctxt "@info:whatsthis"
#| msgid ""
#| "<para>The distribution to be used during scheduling</para>"
#| "<para>If distribution is 'None', the tasks estimate is used as is during scheduling.</para>"
#| "<para>If distribution is 'PERT', the estimate used is calculated based on the entered optimistic- (O), pessimistic-(P) and most likely (M) estimate. The formula used for this is (O + 4 * M + P) / 6."
#| "<para>"
msgctxt "@info:whatsthis"
msgid ""
"<para>The distribution to be used during scheduling</para>"
"<para>If distribution is 'None', the tasks estimate is used as is during scheduling.</para>"
"<para>If distribution is 'PERT', the estimate used is calculated based on the entered optimistic- (O), pessimistic-(P) and most likely (M) estimate. The formula used for this is (O + 4 * M + P) / 6.</para>"
msgstr ""
"<para>Fordelingen som skal brukes under planleggingen</para>"
"<para>Hvis fordelingen er «Ingen», så brukes oppgaveestimatene som de er under planleggingen.</para>"
"<para>Hvis fordelingen er «PERT», så blir estimatet beregnet ut fra de angitte optimistiske (O), pessimistiske (P) og mest sannsynlige (M) estimatene. Formelen som brukes er (O + 4 * M + P)/6.</para>"
#. +> trunk5 stable5
#: models/kptcommonstrings.cpp:150
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "Defines the schedules to be calculated"
msgstr "Definerer planene som skal beregnes"
#. +> trunk5 stable5
#: models/kptcommonstrings.cpp:151
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "The scheduled start time"
msgstr "Planlagt starttid"
#. +> trunk5 stable5
#: models/kptcommonstrings.cpp:152
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "The scheduled finish time"
msgstr "Planlagt ferdig tid"
#. +> trunk5 stable5
#: models/kptcommonstrings.cpp:153
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "The scheduling direction"
msgstr "Planleggingsretning"
#. +> trunk5 stable5
#: models/kptcommonstrings.cpp:155
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<para>The scheduling direction.</para>"
"<para>If direction is Forward, the project is scheduled starting at the projects earliest start time specified in the main project dialog.</para>"
"<para>If direction is Backward, the project is scheduled starting at the projects latest finish time specified in the main project dialog.</para>"
msgstr ""
"<para>Planleggingsretningen.</para>"
"<para>Hvis retningen er Forover blir tidsplanen lagt med start i prosjektets tidligste starttid, som oppgitt i prosjektets hoveddialog.</para>"
"<para>Hvis retningen er Bakover blir tidsplanen lagt med slutt på prosjektets seneste slutt-tid som oppgitt i prosjektets hoveddialog.</para>"
#. +> trunk5 stable5
#: models/kptcommonstrings.cpp:161
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "The scheduler used for calculating the project schedule"
msgstr "Planleggeren som brukes til å beregne prosjektets tidsplan"
#. +> trunk5 stable5
#: models/kptcommonstrings.cpp:163
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<para>The scheduler used for calculating the project schedule.</para>"
"<para>The default built-in scheduler is the Network Scheduler.</para>"
"<para>Other schedulers presently available is RCPS if libRCPS is installed on your system. RCPS is a genetics based resource constrained project scheduler.</para>"
msgstr ""
"<para>Planleggeren som brukes til å beregne prosjektplanen.</para>"
"<para>Standard innebygget planlegger er Nettverksplanlegger.</para>"
"<para>Andre planleggere som er tilgjengelige nå er RCPS hvis libRCPS er installert på systemet. RCPS er en genetisk basert prosjektplanlegger med ressurs-skranker.</para>"
#. +> trunk5 stable5
#: models/kptcommonstrings.cpp:170
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "The granularity used when calculating the project schedule"
msgstr "Kornetheten som brukes til å beregne prosjektets tidsplan"
#. +> trunk5
#: models/kptcommonstrings.cpp:172
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid ""
"<para>The scheduling mode:"
"<list>"
"<item><emphasis>Manual:</emphasis> Calculation must be initiated manually.</item>"
"<item><emphasis>Auto:</emphasis> Calculation is initiated automatically.</item>"
"</list>"
"</para>"
msgstr ""
#. +> trunk5 stable5
#: models/kptcommonstrings.cpp:180
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "The url of the document"
msgstr "URL til dokumentet"
#. +> trunk5 stable5
#: models/kptcommonstrings.cpp:181
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "The type of the document"
msgstr "Type dokument"
#. +> trunk5 stable5
#: models/kptcommonstrings.cpp:182
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "The status of the document"
msgstr "Status for dokumentet"
#. +> trunk5 stable5
#: models/kptcommonstrings.cpp:183
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "Defines how this document is sent"
msgstr "Definerer hvordan dette dokumentet sendes"
"<para>A working resource can be assigned to one or more required resources. A required resource is a material resource that the working resource depends on in order to do the work.</para>"
"<para>To be able to use a material resource as a required resource, the material resource must be part of a group of type <emphasis>Material</emphasis>.</para>"
msgstr ""
"<title>Nødvendige ressurser</title>"
" "
"<para>En arbeidsressurs kan tilordnes til en eller flere nødvendige ressurser. En nødvendig ressurs er en materialressurs som arbeidsressursen trenger for å utføre arbeidet.</para>"
" "
"<para>For at en materialressurs skal kunne brukes som en nødvendig ressurs må materialressursen være en del av en gruppe av type <emphasis>Materiale</emphasis>.</para>"
#. +> trunk5 stable5
#: models/kptresourceallocationmodel.cpp:271
#, kde-format
msgid "There is %1 resource available in this group"
msgid_plural "There are %1 resources available in this group"
msgstr[0] "Det er %1 ressurs tilgjengelig i denne gruppa"
msgstr[1] "Det er %1 ressurser tilgjengelig i denne gruppa"
#. +> trunk5 stable5
#: models/kptresourceallocationmodel.cpp:332
#, kde-format
msgid "Allocation"
msgstr "Tilordning"
#. +> trunk5 stable5
#: models/kptresourceallocationmodel.cpp:333
#, kde-kuit-format
msgctxt "@title:column"
msgid "Available"
msgstr "Tilgjengelig"
#. +> trunk5 stable5
#: models/kptresourceallocationmodel.cpp:334
#, kde-kuit-format
msgctxt "@title:column"
msgid "Required Resources"
msgstr "Nødvendige ressurser"
#. +> trunk5 stable5
#: models/kptresourceallocationmodel.cpp:346
#, kde-format
msgid "Resource allocation"
msgstr "Ressurstildeling"
#. +> trunk5 stable5
#: models/kptresourceallocationmodel.cpp:347
#, kde-kuit-format
msgctxt "@info:tootip"
msgid "Available resources or resource units"
msgstr "Tilgjengelige ressurser eller ressursenheter"
#. +> trunk5 stable5
#: models/kptresourceallocationmodel.cpp:348
#, kde-kuit-format
msgctxt "@info:tootip"
msgid "Required material resources"
msgstr "Nødvendige materialressurser:"
#. +> trunk5 stable5
#: models/kptresourceallocationmodel.cpp:354
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Required Resources</title>"
"<para>A working resource can be assigned to one or more required resources. A required resource is a material resource that the working resource depends on in order to do the work.</para>"
"<para>To be able to use a material resource as a required resource, the material resource must be part of a group of type Material.</para>"
msgstr ""
"<title>Nødvendige ressurser</title>"
" "
"<para>En arbeidsressurs kan tilordnes til en eller flere nødvendige ressurser. En nødvendig ressurs er en materialressurs som arbeidsressursen trenger for å utføre arbeidet.</para>"
" "
"<para>For at en materialressurs skal kunne brukes som en nødvendig ressurs må materialressursen være en del av en gruppe av type Materiale.</para>"
"<para>You can allocate a number of resources from a group and let the scheduler select from the available resources at the time of scheduling.</para>"
" These dynamically allocated resources will be in addition to any resource you have allocated specifically."
msgstr ""
"<title>Gruppetilordninger</title>"
" "
"<para>Du kan tilordne ressurser fra en gruppe og la planleggeren velge blant tilgjengelige ressurser på plantidspunktet.</para>"
" Slike ressurser som tilordnes dynamisk kommer i tillegg til ressurser som uttrykkelig er tilordnet."
#. +> trunk5 stable5
#: models/kptresourceallocationmodel.cpp:810
#, kde-format
msgctxt "1: free resources, 2: number of resources"
msgid "%1 of %2"
msgstr "%1 av %2"
#. +> trunk5 stable5
#: models/kptresourceallocationmodel.cpp:813
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "There is %1 resource available in this group"
msgid_plural "There are %1 resources available in this group"
msgstr[0] "Det er %1 ressurs tilgjengelig i denne gruppa"
msgstr[1] "Det er %1 ressurser tilgjengelig i denne gruppa"
#. +> trunk5 stable5
#: models/kptresourceallocationmodel.cpp:847
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "No material resources available"
msgstr "Ingen materialressurser tilgjengelige"
#. +> trunk5 stable5
#: models/kptresourceallocationmodel.cpp:855
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "No required resources"
msgstr "Ingen nødvendige ressurser"
#. +> trunk5 stable5
#: models/kptresourceallocationmodel.cpp:858
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "Material resources cannot have required resources"
msgstr "Materialressurser kan ikke ha nødvendige ressurser"
#. +> trunk5 stable5
#: models/kptresourceallocationmodel.cpp:860
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "Team resources cannot have required resources"
msgstr "Lag-ressurser kan ikke ha nødvendige ressurser"
#. +> trunk5 stable5
#: models/kptresourceappointmentsmodel.cpp:589
#, kde-format
msgid "External project: %1"
msgstr "Eksternt prosjekt: %1"
#. +> trunk5 stable5
#: models/kptresourceappointmentsmodel.cpp:665
#, kde-format
msgid "The total booking on %1, along with the maximum hours for the resource"
msgstr "Total bestilling på %1, sammen med høyeste antall timer for ressursen"
#. +> trunk5 stable5
#: models/kptresourceappointmentsmodel.cpp:697
#, kde-format
msgid "Total booking by this task"
msgstr "Total bestilling fra denne oppgaven"
#. +> trunk5 stable5
#: models/kptresourceappointmentsmodel.cpp:699
#, kde-format
msgid "Total booking by the external project"
msgstr "Total bestilling fra det eksterne prosjektet"
msgid "This document contains an unknown encryption method. Some parts may be unreadable."
msgstr "Dette dokumentet inneholder en ukjent krypteringsmetode. Noen deler kan være uleselige."
#. +> trunk5 stable5
#: store/KoEncryptedStore.cpp:300
#, kde-format
msgid "This document contains incomplete encryption data. Some parts may be unreadable."
msgstr "Dette dokumentet inneholder ufullstendige krypteringsdata. Noen deler kan være uleselige."
#. +> trunk5 stable5
#: store/KoEncryptedStore.cpp:314
#, kde-format
msgid "QCA has currently no support for SHA1 or PBKDF2 using SHA1. The document can not be opened."
msgstr "QCA har nå ingen støtte for SHA 1 eller PBKDF2 som bruker SHA1. Dokumentet kan ikke åpnes."
#. +> trunk5 stable5
#: store/KoEncryptedStore.cpp:344
#, kde-format
msgid "The manifest file seems to be corrupted. It cannot be modified and the document will remain unreadable. Please try and save the document again to prevent losing your work."
msgstr "Det ser ut til at manifest-fila er ødelagt. Den kan ikke endres og dokumentet vil fortsette å være uleselig. Forsøk å lagre dokumentet igjen for å unngå å miste arbeidet ditt."
#. +> trunk5 stable5
#: store/KoEncryptedStore.cpp:442
#, kde-format
msgid "The manifest file cannot be written. The document will remain unreadable. Please try and save the document again to prevent losing your work."
msgstr "Manifestfila kan ikke skrives. Dokumentet vil fortsette å være uleselig. Forsøk å lagre dokumentet igjen for å unngå å miste arbeidet ditt."
#. +> trunk5 stable5
#: store/KoEncryptedStore.cpp:563
#, kde-format
msgid "Please enter the password to open this file."
msgstr "Oppgi passord for å åpne denne fila. "
#. +> trunk5 stable5
#: store/KoEncryptedStore.cpp:738
#, kde-format
msgid "Please enter the password to encrypt the document with."
msgstr "Oppgi passordet som dokumentet skal krypteres med."
#. +> trunk5 stable5
#: store/KoEncryptedStore.cpp:752
#, kde-format
msgid "Do you want to save the password?"
msgstr "Vil du lagre passordet?"
#. +> trunk5 stable5
#: store/KoNetAccess.cpp:104
#, kde-format
msgid "File '%1' is not readable"
msgstr "Fila «%1» kan ikke leses"
#. +> trunk5 stable5
#: store/KoNetAccess.cpp:438
#, kde-format
msgid "ERROR: Unknown protocol '%1'"
msgstr "FEIL: ukjent protokoll «%1»"
#. +> trunk5 stable5
#: store/KoStore.cpp:182
#, kde-format
msgid "The directory mode is not supported for remote locations."
msgstr "Mappemodus støttes ikke for nettverkssteder."
"<para>The Cost Breakdown Structure (CBS) consists of accounts organized into a tree structure. Accounts can be tied to tasks or resources. Usually there will be two top accounts, one for aggregating costs from tasks and one for aggregating costs from resources.</para>"
"<para>This view supports printing using the context menu.<nl/>"
#| "<para>A calendar defines availability for resources or tasks of type <emphasis>Duration</emphasis>. A calendar can be specific to a resource or task, or shared by multiple resources or tasks. A day can be of type <emphasis>Undefined</emphasis>, <emphasis>Non-working day</emphasis> or <emphasis>Working day</emphasis>. A working day has one or more work intervals defined. </para>"
#| "<para>A calendar can have sub calendars. If a day is undefined in a calendar, the parent calendar is checked. An <emphasis>Undefined</emphasis> day defaults to <emphasis>Non-working</emphasis> if used by a resource, or <emphasis>available all day</emphasis> if used by a task.</para>"
#| "<para>A calendar can be defined as the <emphasis>Default calendar</emphasis>. The default calendar is used by a working resource, when the resources calendar is not explicitly set.</para>"
msgctxt "@info:whatsthis"
msgid ""
"<title>Work & Vacation Editor</title>"
"<para>A calendar defines availability for resources or tasks of type <emphasis>Duration</emphasis>. A calendar can be specific to a resource or task, or shared by multiple resources or tasks. A day can be of type <emphasis>Undefined</emphasis>, <emphasis>Non-working day</emphasis> or <emphasis>Working day</emphasis>. A working day has one or more work intervals defined. </para>"
"<para>A calendar can have sub calendars. If a day is undefined in a calendar, the parent calendar is checked. An <emphasis>Undefined</emphasis> day defaults to <emphasis>Non-working</emphasis> if used by a resource, or <emphasis>available all day</emphasis> if used by a task.</para>"
"<para>A calendar can be defined as the <emphasis>Default calendar</emphasis>. The default calendar is used by a working resource, when the resources calendar is not explicitly set.<nl/>"
"<link url='%1'>More...</link></para>"
msgstr ""
"<title>Redigering av arbeid og ferie</title>"
"<para>En kalender definerer tilgjengelighet for ressurser eller oppgaver av type <emphasis>Varighet</emphasis>. En kalender kan gjelde spesielt for en ressurs eller oppgave, eller være delt mellom flere ressurser eller oppgaver. En dag kan være av type <emphasis>Udefinert</emphasis>, <emphasis>Fridag</emphasis> eller <emphasis>Arbeidsdag</emphasis>. En arbeidsdag har en eller flere definerte arbeidsøkter.</para>"
"<para> En kalender kan ha underkalendre. Hvis en dag er udefinert i en kalener blir den overliggende kalenderen undersøkt. Hvis ikke annet er oppgitt blir en <emphasis>Udefinert</emphasis> dag betraktet som en <emphasis>Fridag</emphasis> hvis den brukes av en ressurs, eller <emphasis>tilgjengelig hele dagen</emphasis> hvis den brukes av en oppgave.</para>"
" "
"<para>En kalender kan defineres som <emphasis>standardkalender</emphasis>. En arbeidsressurs bruker standardkalenderern når rerssurskalenderen ikke er uttrykkelig angitt.</para>"
"<para>Edit dependencies between tasks.Dependencies can be added by dragging a connection area (start or finish) from one task to a connection area of a different task. You can edit or delete a dependency using the context menu.</para>"
"<para>This view supports printing using the context menu.<nl/>"
"<para>Displays scheduled tasks in a Gantt diagram. The chart area can be zoomed in and out with a slider positioned in the upper left corner of the time scale. <note>You need to hoover over it with the mouse for it to show.</note></para>"
"<para>This view supports configuration and printing using the context menu of the tree view.<nl/>"
"<para>Displays scheduled milestones in a Gantt diagram. The chart area can be zoomed in and out with a slider positioned in the upper left corner of the time scale. <note>You need to hoover over it with the mouse for it to show.</note></para>"
"<para>This view supports configuration and printing using the context menu.<nl/>"
"<link url='%1'>More...</link></para>"
msgstr ""
#. +> trunk5 stable5
#: ui/kptganttview.cpp:1827
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Resource Assignments (Gantt)</title>"
"<para>Displays the scheduled resource - task assignments in a Gantt diagram. The chart area can be zoomed in and out with a slider positioned in the upper left corner of the time scale. <note>You need to hoover over it with the mouse for it to show.</note></para>"
"<para>This view supports configuration and printing using the context menu.<nl/>"
"The Work Breakdown Structure introduces numbering for all tasks in the project, according to the task structure.\n"
"The WBS code is auto-generated.\n"
"You can define the WBS code pattern using the Define WBS Pattern command in the Tools menu."
msgstr ""
"Oppgavestrukturen innfører nummerering for alle oppgaver i prosjektet, i følge den angitte strukturen.\n"
"WBS-koden lages automatisk.\n"
"Du kan definere mønster for WBS-koden med kommandoen Definer WBS-mønster i Verktøy-menyen."
#. +> trunk5 stable5
#: ui/kptmainprojectpanel.cpp:108
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "Enables sharing resources with other projects"
msgstr ""
#. +> trunk5 stable5
#: ui/kptmainprojectpanel.cpp:110
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Shared resources</title>"
"Resources can be shared between projects to avoid overbooking resources across projects. Shared resources must be defined in a separate file, and you must have at least read access to it. The projects that share the resources must also be accessible by you."
msgstr ""
#. +> trunk5 stable5
#: ui/kptmainprojectpanel.cpp:118
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "File where shared resources are defined"
msgstr ""
#. +> trunk5 stable5
#: ui/kptmainprojectpanel.cpp:123
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "Directory where all the projects that share resources can be found"
msgstr ""
#. +> trunk5 stable5
#: ui/kptmainprojectpanel.cpp:129
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid "Load shared resource assignments at startup"
#| "<para>Resources are organized in a Resource Breakdown Structure. Resources can be of type <emphasis>Work</emphasis> or <emphasis>Material</emphasis>. When assigned to a task, a resource of type <emphasis>Work</emphasis> can affect the duration of the task, while a resource of type <emphasis>Material</emphasis> does not. A resource must refer to a <emphasis>Calendar</emphasis> that defines the working hours.</para>"
msgctxt "@info:whatsthis"
msgid ""
"<title>Resource Editor</title>"
"<para>Resources are organized in a Resource Breakdown Structure. Resources can be of type <emphasis>Work</emphasis> or <emphasis>Material</emphasis>. When assigned to a task, a resource of type <emphasis>Work</emphasis> can affect the duration of the task, while a resource of type <emphasis>Material</emphasis> does not. A resource must refer to a <emphasis>Calendar</emphasis> defined in the <emphasis>Work and Vacation Editor</emphasis>.<nl/>"
"<link url='%1'>More...</link></para>"
msgstr ""
"<title>Ressursredigering</title>"
"<para>Ressurser organiseres i en RBS (Resource Breakdown Structure). Ressurser kan være av type <emphasis>Arbeid</emphasis> eller<emphasis>Materiale</emphasis>.En ressurs av type <emphasis>Arbeid</emphasis>påvirker varigheten av en oppgave den tilordnes, mens en ressurs av typen <emphasis>Materiale</emphasis> ikke gjør det. En ressurs må henvise til en <emphasis>Kalender</emphasis> som definerer arbeidstid.</para>"
#. +> trunk5 stable5
#: ui/kptresourceeditor.cpp:289
#, kde-format
msgid "Add Resource Group"
msgstr "Legg til ressursgruppe"
#. +> trunk5 stable5
#: ui/kptresourceeditor.cpp:294
#, kde-format
msgid "Add Resource"
msgstr "Legg til ressurs"
#. +> trunk5
#: ui/kptscheduleeditor.cpp:177
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Schedule Editor</title>"
"<para>The Schedule Editor is used to create, edit, calculate and delete schedules.</para>"
"<para>If <emphasis>Mode</emphasis> is set to <emphasis>Auto</emphasis>, the schedule is calculated automatically. <note>Only one schedule can be in <emphasis>Auto Mode</emphasis> simultaneously and it must be a top level schedule without sub-schedules.</note></para>"
"<para>A schedule can have sub-schedules. A sub-schedule can use the projects progress data in order to reschedule only tasks that are not yet finished. Rescheduling will then use e.g. actual start and remaining effort for the tasks.<nl/>"
"<link url='%1'>More...</link></para>"
msgstr ""
#. +> stable5
#: ui/kptscheduleeditor.cpp:173
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Schedule Editor</title>"
"<para>The Schedule Editor is used to create, edit, calculate and delete schedules. A schedule can have sub-schedules. A sub-schedule can use the projects progress data in order to reschedule only tasks that are not yet finished. Rescheduling will then use e.g. actual start and remaining effort for the tasks.<nl/>"
"This is not limited to persons available in a resource group but can be anyone. You can even directly access your address book with the Choose button."
msgstr ""
"Personen som er ansvarlig for denne oppgaven.\n"
"\n"
"Dette er ikke begrenset til personer som finnes i en ressursgruppe, men kan være hvem som helst. Med Velg-knappen kan du tilmed hente adresseboka direkte."
#| "Scheduling Configuration. These settings affect the actual scheduling of the task.\n"
#| "\n"
#| "The estimation can be either effort based or duration based. If it is effort based, the final duration will depend on the resources assigned to the task. For duration based estimation, the assigned resources don't affect the fixed duration of the task, but only the costs."
msgid ""
"Scheduling Configuration. These settings affect the actual scheduling of the task.\n"
"\n"
"The estimation can be either effort based or duration based. If it is effort based, the final duration will depend on the resources assigned to the task. For duration based estimation, the assigned resources do not affect the fixed duration of the task, but only the costs."
msgstr ""
"Planleggingsoppsett. Disse innstillingene påvirker hvordan oppgaven planlegges.\n"
"\n"
"Estimatet kan baseres enten på innsats eller varighet. Hvis det er innsatsbasert vil varigheten avhenge av ressurser tilordnet oppgaven. For varighetsbasert estimat vil tilordnede ressurser ikke påvirke varigheten, men bare kostnadene."
"<para>This dialog consists of the following parts:"
"<list>"
"<item>Edit mode control to define the behavior of the dialog.</item>"
"<item>Controls to mark the task as started and finished.</item>"
"<item>Table to enter used effort for each resource.</item>"
"<item>Table for entry of task completion and remaining effort.</item>"
"</list>"
"</para>"
"<para>Edit modes:"
"<list>"
"<item><emphasis>Per resource</emphasis> requires you to enter used effort for each resource assigned to this task. This enables the most detailed tracking of effort- and cost usage.</item>"
"<item><emphasis>Per task</emphasis> enables you to enter the minimum of information. When completion is changed, used effort and remaining effort is automatically calculated, but can of course be manually modified if needed.</item>"
"</list>"
"<note>You should select the desired edit mode when starting the task.</note><nl/>"
"These values are used if your estimate is not in hours.\n"
"Let us say Hours per day is 8. If you estimate that a task needs 3 days effort to complete, this is converted to 24 hours when the task is scheduled. The actual time it will take to complete is of course dependent on the availability of the person (or persons) that is assigned to the task."
msgstr ""
"Disse verdiene brukes hvis ditt estimat ikke er i timer.\n"
"Hvis antall timer per dag er 8, og oppgaven er estimert til 3 dager å fullføre, så blir dette omgjort til 24 timer når oppgaven planlegges. Den virkelige tiden det tar til fullføring er naturligvis avhengig av hvor tilgjengelig(e) personen(e) tilordnet oppaven er."
"<para>Creates a new project with default values defined in <emphasis>Settings</emphasis>.<nl/>"
"Opens the <emphasis>project dialog</emphasis> so you can define project specific properties like <resource>Project Name</resource>, <resource>Target Start</resource> and <resource>- End</resource> times.<nl/>"
"<link url='%1'>More...</link></para>"
msgstr ""
#. +> trunk5 stable5
#: ui/welcome/WelcomeView.cpp:111
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Shared resources</title>"
"<para>Create a shared resources file.<nl/>"
"This enables you to only create your resources once, you just refer to your resources file when you create a new project.<nl/>"
"These resources can then be shared between projects to avoid overbooking resources across projects.<nl/>"
"Shared resources must be defined in a separate file.<nl/>"
"<link url='%1'>More...</link></para>"
msgstr ""
#. +> trunk5 stable5
#: ui/welcome/WelcomeView.cpp:124
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Recent Projects</title>"
"<para>A list of the 10 most recent project files opened.</para>"
"<para><nl/>"
"This enables you to quickly open projects you have worked on recently.</para>"
msgstr ""
#. +> trunk5 stable5
#: ui/welcome/WelcomeView.cpp:133
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Introduction to <application>Plan</application></title>"
"<para>These introductory pages gives you hints and tips on what you can use <application>Plan</application> for, and how to use it.</para>"
msgstr ""
#. +> trunk5 stable5
#: ui/welcome/WelcomeView.cpp:141
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Context help</title>"
"<para>Help is available many places using <emphasis>What's This</emphasis>.<nl/>"
"It is activated using the menu entry <interface>Help->What's this?</interface> or the keyboard shortcut <shortcut>Shift+F1</shortcut>.</para>"
"<para>In dialogs it is available via the <interface>?</interface> in the dialog title bar.</para>"
"<para>If you see <link url='%1'>More...</link> in the text, pressing it will display more information from online resources in your browser.</para>"
"<p>Many functions has help and hints that can be displayed with <span style=\" font-style:italic;\">What's this</span>.</p>"
"<p>Activate it by selecting <span style=\" font-style:italic;\">Help->What's this</span> or <span style=\" font-style:italic;\">Shift+F1</span>.</p>"
msgid "Failed to properly configure astrometry config file. Please click the options button in the lower right of the Astrometry Tab in Ekos to correct your settings. Then try starting Ekos again."
msgid "To import an existing data file, enter its filename here. You will then describe the contents of the file below. You can leave the filename blank to construct a catalog file with a valid header, but no data."
msgstr "Oppgi filnavn her for å importere en eksisterende datafil. Nedenfor skal du beskrive innholdet i fila. Du kan la filnavnet være tomt for å bygge en katalogfil med gyldig filhode, men uten data."
"This button will compute the field-of-view (FOV) angle for a specific eyepiece/telescope combination. You must first specify the focal lengths of the telescope and eyepiece, and the FOV angle of the eyepiece in the above entry fields.\n"
"\n"
"The computed FOV angle (in arcminutes) will be displayed in the \"Field of view\" edit box."
msgstr ""
"Denne knappen beregner synsfeltvinkelen (FOV) for en bestemt kombinasjon av teleskop og okular. Du må først oppgi brennviddene for teleskopet og okularet, og okularets synsfeltvinkel, i datafeltene ovenfor.\n"
"\n"
"Den beregnede synsfeltvinkelen (i bueminutter) blir vist i redigeringsboksen «Synsfelt»."
"Enter the telescope focal length, in millimeters.\n"
"\n"
"This is one of the data fields required for defining a field-of-view (FOV) symbol which matches the field-of-view of a camera mounted on a telescope."
msgstr ""
"Oppgi teleskopets brennvidde i millimeter.\n"
"\n"
"Dette er et av datafeltene som trengs for å definere et synsfeltsymbol som passer med synsfeltet for et kamera montert på et teleskop."
"Enter the physical size of the CCD chip or film negative.\n"
"\n"
"This is one of the data fields required for defining a field-of-view (FOV) symbol which matches the field-of-view of a camera mounted on a telescope."
msgstr ""
"Oppgi fysisk størrelse på CCD-brikken eller filmnegativet.\n"
"\n"
"Dette er et av datafeltene som trengs for å definere et synsfeltsymbol som passer med synsfeltet for et kamera montert på et teleskop."
"This button will compute the field-of-view (FOV) angle for a specific camera/telescope combination. You must first specify the focal length of the telescope and the size of the CCD chip or film negative.\n"
"\n"
"The computed FOV angle (in arcminutes) will be displayed in the \"Field of view\" edit box."
msgstr ""
"Denne knappen beregner synsfeltvinkelen (FOV) for en bestemt kombinasjon av kamera og teleskop. Du må først oppgi brennvidden for teleskopet og størrelsen på CCD-brikken eller filmnegativet.\n"
"\n"
"Den beregnede synsfeltvinkelen (i bueminutter) blir vist i redigeringsboksen «Synsfelt»."
"This button will compute the Half Power Beam Width (HPBW) angle for a specific radiotelescope and observing wavelength combination, assuming no multibeam receiver is available at the telescope. You must first specify the diameter of the radiotelescope and the observing wavelength.\n"
"\n"
"The computed HPBW angle (in arcminutes) will be displayed in the \"Field of view\" edit box."
msgstr ""
"Denne knappen beregner Half Power Beam Width (HPBW) for et bestemt radioteleskop ved gitt observasjonsbølgelengde, med antakelse at det ikke finnes en flerstråle-mottaker ved teleskopet. Du må først oppgi diameter for radioteleskopet og observasjonsbølgelengden.\n"
"\n"
"Den beregnede HPBW-vinkelen (i bueminutter) blir vist i redigeringsboksen «Synsfelt»."
msgid "<p>Frame rotation with respect to Celestial Pole. Zero degrees indicates that <b>UP</b> is pointing directly at the pole. 90 degrees indicates that <b>UP</b> is rotated 90 degrees clockwise with respect to the pole.</p>"
msgid "Your data directory was not found. You can click the button below to copy a default KStars data directory to the correct location, or if you have a KStars directory already some place else, you can exit KStars and copy it to that location yourself."
msgid "Installing this in your data directory will enable the CCD Simulator in KStars to take realistic images. This is useful for testing sequences, plate solving, and learning to use KStars. Just click the button to install or unzip the zip file and place the gsc folder in the data directory."
#| "<p>You may now download optional data files to enhance KStars, such as Messier object images, or a more complete NGC/IC catalog. Press the <span style=\" font-weight:600;\">Download Extra Data</span> button to proceed. </p>"
#| "<p>You can also use this tool later, by selecting <span style=\" font-weight:600;\">Download New Data</span> from the <span style=\" font-weight:600;\">File</span> menu.</p>"
#| "</body></html>"
msgid ""
"<p>You may now download optional data files to enhance KStars, such as Messier object images, or a more complete NGC/IC catalog. Press the <b>Download Extra Data</b> button to proceed. </p>"
"<p>You can also use this tool later, by selecting <b>Download New Data</b> from the <b>File</b> menu.</p>"
msgstr ""
"<html><head></head><body>"
"<p>Du kan nå laste ned valgfrie datafiler som forbedrer KStars,slik som bilder av Messier-objekter, eller en mer fullstendig NGC/IC-katalog. Trykk på knappen <span style=\" font-weight:600;\">Last ned ekstra data</span> for å fortsette. </p>"
"<p>Du kan også bruke dette verktøyet senere, ved å velge <span style=\" font-weight:600;\">Last ned nye data</span> fra menyen<span style=\" font-weight:600;\">Fil</span>.</p>"
msgid "Are you sure you want to clear all of the solution points?"
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:1541
#, fuzzy, kde-format
#| msgid "Clear Points"
msgid "Clear Solution Points"
msgstr "Tøm punkter"
#. +> trunk5
#: ekos/align/align.cpp:1549
#, fuzzy, kde-format
#| msgid "Are you sure you want to clear the list of entries?"
msgid "Are you sure you want to clear all the alignment points?"
msgstr "Er du sikker på at du vil tømme innslagslista?"
#. +> trunk5
#: ekos/align/align.cpp:1550
#, fuzzy, kde-format
#| msgid "Clear Points"
msgid "Clear Align Points"
msgstr "Tøm punkter"
#. +> trunk5
#: ekos/align/align.cpp:1695
#, fuzzy, kde-format
msgid "The Mount Model Tool is Reset."
msgstr "Park"
#. +> trunk5
#: ekos/align/align.cpp:1732
#, kde-format
msgid "Please Check the Alignment Points."
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:1739
#, kde-format
msgid "In the Align Module, \"Nothing\" is Selected for the Solver Action. This means that the mount model tool will not sync/align your mount but will only report the pointing model errors. Do you wish to continue?"
msgid "Astrometry.net uses python3 and the astropy package for plate solving images offline. These were not detected on your system. Please go into the Align Options and either click the setup button to install them or uncheck the default button and enter the path to python3 on your system and manually install astropy."
msgid "Blind solver takes a very long time to solve but can reliably solve any image any where in the sky given enough time."
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:2950
#, kde-format
msgid "Use existing settings"
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:2951
#, kde-format
msgid "Mount must be pointing close to the target location and current field of view must match the image's field of view."
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:2955
#, kde-format
msgid "No metadata is available in this image. Do you want to use the blind solver or the existing solver settings?"
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:2957
#, kde-format
msgid "Astrometry solver"
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:3014
#, kde-format
msgid "Solver iteration #%1"
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:3052
#, kde-format
msgid "Solver RA (%1) DEC (%2) Orientation (%3) Pixel Scale (%4)"
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:3061
#, kde-format
msgid "Current focal length is %1 mm while computed focal length from the solver is %2 mm. Please update the mount focal length to obtain accurate results."
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:3188
#, kde-format
msgid "WCS information updated. Images captured from this point forward shall have valid WCS."
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:3206
#, kde-format
msgid "Solution coordinates: RA (%1) DEC (%2) Telescope Coordinates: RA (%3) DEC (%4)"
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:3212
#, fuzzy, kde-format
#| msgid "Images without coordinates"
msgid "Target is within %1 degrees of solution coordinates."
msgstr "Bilder uten koordinater"
#. +> trunk5
#: ekos/align/align.cpp:3268
#, fuzzy, kde-format
msgid "Setting position angle to %1 degrees E of N..."
msgstr "Park"
#. +> trunk5
#: ekos/align/align.cpp:3305
#, fuzzy, kde-format
#| msgid "Maximum number of transversal steps:"
msgid "Maximum number of iterations reached. Solver failed."
msgstr "Høyeste antall transversale steg:"
#. +> trunk5
#: ekos/align/align.cpp:3337
#, kde-format
msgid "Target is within acceptable range. Astrometric solver is successful."
#| msgid "Slewing to calibration position, please wait until telescope is finished slewing."
msgid "Slewing to calibration position, please wait until telescope completes slewing."
msgstr "Svinger til kalibreringsposisjon, vent til teleskopet er ferdig med å svinge."
#. +> trunk5
#: ekos/align/align.cpp:4491
#, fuzzy, kde-format
#| msgid "Load image"
msgid "Load Image"
msgstr "Last inn bildet"
#. +> trunk5
#: ekos/align/align.cpp:4683
#, kde-format
msgid "World Coordinate System (WCS) is enabled. CCD rotation must be set either manually in the CCD driver or by solving an image before proceeding to capture any further images, otherwise the WCS information may be invalid."
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:4692
#, kde-format
msgid "World Coordinate System (WCS) is disabled."
msgid "Failed to process World Coordinate System: %1. Try again."
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:5512
#, kde-format
msgid "Celestial pole is located outside of the field of view. Would you like to sync and slew the telescope to the celestial pole? WARNING: Slewing near poles may cause your mount to end up in unsafe position. Proceed with caution."
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:5529
#, kde-format
msgid "Warning: Celestial pole is located outside the field of view. Move the mount closer to the celestial pole."
msgid "Accuracy threshold in arcseconds between solution and target coordinates. Plate solver shall be repeatedly executed until the solution coordinates are below the accuracy threshold"
msgid "<p>Use astrometry solver on remote machine running INDI server. You must select <b>Astrometry</b> driver from Auxiliary drivers in your Ekos devices profile for this option to be enabled.</p>"
msgid "The results from Astrometric Solutions from the Capture and Solve Tool, the Load and Slew Tool, and the Mount Model Tool will be displayed below."
msgid "Remove the selected row from the solutions table. This can be useful for getting rid of results that did not actually solve from the table and/or results that you do not need any more. It can clean up clutter on both the graph and table."
msgid "Launch the mount model tool. This tool enables you to create pre-programmed list of points to go to and solve. It can aid in building a pointing model for better accuracy."
"<p>This tool provides a simple method to polar align a German equatorial mount. <span style=\" font-weight:600;\">Park</span> your mount to home position where it <span style=\" font-weight:600;\">points</span> toward the celestial pole. Select mount direction and speed and then click <span style=\" font-weight:600;\">Start</span> to begin the process.</p>"
msgid "<p>Adjust mount's Altitude and Azimuth knobs until the selected star is centered within the crosshair. Click <b>Refresh</b> to begin continuous capture. You are <b>Done</b> when star is centered.</p>"
msgid "<p>This tool can help your mount build a better pointing model by moving the mount to different points in the sky and solving captured images. This can increase the accuracy of your GOTOs. To qualify, your mount must be capable of improving its internal pointing model after each <b>Sync</b> commanded by Ekos. If this is not the case, then this tool is not suitable for your mount.</p>"
"<p>Select the type of objects/points added by the wizard.</p>"
"<p><span style=\" font-weight:600;\">Note:</span> all of the options except Fixed DEC start with a grid of RA/DEC points.</p>"
"\n"
"<ul>\n"
"<li><b>Any Stars:</b> The wizard searches for the nearest star.</li>"
"\n"
"<li><b>Any object:</b> The wizard searches for the nearest object of any type.</li>"
"\n"
"<li><b>Named Stars</b> The wizard searches for the nearest star in the currently visible star list. Note that the first named star might be fairly far from the intended point and also sometimes the same star could be the closest one for multiple points.</li>"
"\n"
"<li><b>Fixed DEC:</b> The wizard generates all points at the chosen DEC.</li>"
"\n"
"<li><b>Fixed Grid:</b> The wizard just uses the original grid without trying to pair it with objects.</li>"
msgid "Automatically generate the specified number of alignment points in the table below. They will be generated based on the options selected in this wizard."
msgid "The Number of points the wizard should generate. If this number is less than 5, it will generate them at the same DEC. After that they will be evenly distributed over RA and DEC. Note, if Fixed DEC is selected, all of the points will be at the same DEC."
msgid "These are the common names for the named stars that are currently up at your location. If you select a star, it will be added to the table below."
msgid "These are the Greek names for the brighter stars that are currently up at your location. If you select a star, it will be added to the table below."
msgid "Clear the entire table of alignment points below. Note that this will not affect your mount in any way. It will not clear your pointing model. It just clears the list of points so that if you run the mount model routine again, these points will not be included."
msgid "<p>Remove the selected row from the alignment point table below. Note that it does <b>not</b> command your mount to clear that point from the model, it just means that if you run the mount model routine, that point will not be included in the list.</p>"
msgid "Add an empty row to the alignment list so that you can manually add an RA and DE for a position you would like the telescope to slew to when doing the mount model routine."
msgid "Open the Find Object dialog so that you can select an object to get an RA and DEC automatically that you would like the telescope to slew to when doing the mount model routine."
msgid "Sort the alignment points, starting with the point closest to the current telescope position, to try to minimize the distance between each slew."
msgid "This is a table of alignment points that you would like the mount model routine to use in aligning your telescope. If you would like to add or remove points, you may use the buttons above. If you would like to run, pause, or stop the mount model routine, you may use the buttons below. You can directly edit an RA or DE for a particular point directly in the cells. Just be sure to follow the format hh:mm:ss. The object name is just provided for convenience and is not used. If you want to change the order of the alignment points, you can drag the row up or down using the vertical header for that row on the left."
msgid "Start or pause the mount model routine. It will slew to and astrometrically solve the list of points in the table above using the settings in the align module. If the routine was previously paused, it will pick up where it left off. If it was stopped or it had finished it will start the routine over again."
msgid "<p>Stop the mount model routine. It will <b>not</b> clear any points from your telescope's pointing model. It will stop the routine and any points currently being solved. If you run the mount model again after hitting stop, it will start the routine over again with the first point.</p>"
msgstr ""
#. +> trunk5
#: ekos/align/offlineastrometryparser.cpp:64
#, kde-format
msgid "Failed to find astrometry.net binaries. Please click the options button in the lower right of the Astrometry Tab in Ekos to correct your settings and make sure that astrometry.net is installed. Then try starting Ekos again."
msgstr ""
#. +> trunk5
#: ekos/align/offlineastrometryparser.cpp:65
#, kde-format
msgid "Missing astrometry files"
msgstr "Mangler astrometry-filer"
#. +> trunk5
#: ekos/align/offlineastrometryparser.cpp:91
#, fuzzy, kde-format
msgid "Detected Astrometry.net version %1"
msgstr "Park"
#. +> trunk5
#: ekos/align/offlineastrometryparser.cpp:96
#, kde-format
msgid "Setting astrometry option --no-fits2fits"
msgstr ""
#. +> trunk5
#: ekos/align/offlineastrometryparser.cpp:101
#, kde-format
msgid "Turning off option --no-fits2fits"
msgstr ""
#. +> trunk5
#: ekos/align/offlineastrometryparser.cpp:195
#, kde-format
msgid "Index file %1 is missing. Astrometry.net would not be able to adequately solve plates until you install the missing index files. Download the index files from http://www.astrometry.net"
msgstr "Indeksfila %1 mangler. Astrometry,net vil ikke kunne løse bilder ordentlig før du installerer manglende indeksfiler. Last dem ned fra http://www.astrometry.net"
#. +> trunk5
#: ekos/align/offlineastrometryparser.cpp:199
#, kde-format
msgid "Index files %1 to %2 are missing. Astrometry.net would not be able to adequately solve plates until you install the missing index files. Download the index files from http://www.astrometry.net"
msgstr "Indeksfilene %1 til %2 mangler. Astrometry,net vil ikke kunne løse bilder ordentlig før du installerer manglende indeksfiler. Last dem ned fra http://www.astrometry.net"
#. +> trunk5
#: ekos/align/offlineastrometryparser.cpp:258
#, fuzzy, kde-format
#| msgid "Error saving file %1"
msgid "Error starting solver: %1"
msgstr "Feil ved lagring av fil %1"
#. +> trunk5
#: ekos/align/offlineastrometryparser.cpp:276
#, kde-format
msgid "Starting solver..."
msgstr "Starter løseren …"
#. +> trunk5
#: ekos/align/offlineastrometryparser.cpp:315
#: ekos/align/remoteastrometryparser.cpp:245
#, kde-format
msgid "Solver failed. Try again."
msgstr "Løseren mislyktes. Forsøk igjen."
#. +> trunk5
#: ekos/align/offlineastrometryparser.cpp:339
#, kde-format
msgid "WCS header missing or corrupted. Solver failed."
msgstr "WCS-hode mangler eller er ødelagt. Løseren mislyktes."
#. +> trunk5
#: ekos/align/offlineastrometryparser.cpp:372
#: ekos/align/onlineastrometryparser.cpp:493
#: ekos/align/remoteastrometryparser.cpp:287
#, kde-format
msgid "Solver completed in %1 second."
msgid_plural "Solver completed in %1 seconds."
msgstr[0] "Løseren fullførte på %1 sekund."
msgstr[1] "Løseren fullførte på %1 sekunder."
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:82
#, fuzzy, kde-format
#| msgctxt "Comment"
#| msgid "Connect to the Internet"
msgid "Error: no connection to the Internet."
msgstr "Koble til Internett"
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:197
#, fuzzy, kde-format
#| msgid "Failed to open the file \"%1\"."
msgid "Failed to open the file %1: %2"
msgstr "Klarte ikke åpne fila «%1»."
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:268
#, fuzzy, kde-format
#| msgid "Uploading file '%1'..."
msgid "Uploading file..."
msgstr "Laster opp fil «%1» …"
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:341
#, fuzzy, kde-format
#| msgid "Error during parsing"
msgid "JSON error during parsing (%1)."
msgstr "Feil under tolking"
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:359
#, kde-format
msgid "Astrometry.net authentication failed. Check the validity of the Astrometry.net API Key."
msgstr ""
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:367
#, kde-format
msgid "Authentication to astrometry.net is successful. Session: %1"
msgstr ""
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:376
#, fuzzy, kde-format
#| msgid "Upload failed"
msgid "Upload failed."
msgstr "Opplasting mislyktes"
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:385
#, fuzzy, kde-format
msgid "Parsing submission ID failed."
msgstr "Park"
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:390
#, fuzzy, kde-format
msgid "Upload complete. Waiting for astrometry.net solver to complete..."
msgstr "Park"
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:413
#, kde-format
msgid "Failed to retrieve job ID."
msgstr ""
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:447
#, fuzzy, kde-format
#| msgid "Solver aborted after %1 second."
#| msgid_plural "Solver aborted after %1 seconds"
msgid "Solver failed after %1 second."
msgid_plural "Solver failed after %1 seconds."
msgstr[0] "Løser avbrøt etter %1 sekund."
msgstr[1] "Løser avbrøt etter %1 sekunder"
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:457
#, fuzzy, kde-format
#| msgid "Error parsing"
msgid "Error parsing parity."
msgstr "Feil ved tolking"
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:464
#, fuzzy, kde-format
#| msgid "Error parsing router description."
msgid "Error parsing orientation."
msgstr "Klarte ikke tolke ruter-beskrivelse."
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:472
#, fuzzy, kde-format
#| msgid "Error parsing"
msgid "Error parsing RA."
msgstr "Feil ved tolking"
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:479
#: ekos/align/onlineastrometryparser.cpp:487
#, fuzzy, kde-format
#| msgid "Error parsing"
msgid "Error parsing DEC."
msgstr "Feil ved tolking"
#. +> trunk5
#: ekos/align/opsalign.cpp:39
#, kde-format
msgid "Internal or External astrometry.cfg?"
msgstr ""
#. +> trunk5
#: ekos/align/opsalign.cpp:45
#, kde-format
msgid "Internal or External Plate Solver?"
msgstr ""
#. i18n: ectx: label, entry (AstrometryWCSIsInternal), group (Align)
#. +> trunk5
#: ekos/align/opsalign.cpp:50 kstars.kcfg:1978
#, kde-format
msgid "Internal or External wcsinfo?"
msgstr ""
#. +> trunk5
#: ekos/align/opsalign.cpp:80
#, fuzzy, kde-format
#| msgid "All packages are already installed"
msgid "Homebrew, python, and astropy are already installed"
msgstr "Alle pakkene er installert fra før"
#. +> trunk5
#: ekos/align/opsalign.cpp:84
#, kde-format
msgid ""
"This installer will install the following requirements for astrometry.net if they are not installed:\n"
"Homebrew -an OS X Unix Program Package Manager\n"
"Python3 -A Powerful Scripting Language \n"
"Astropy -Python Modules for Astronomy \n"
" Do you wish to continue?"
msgstr ""
#. +> trunk5
#: ekos/align/opsalign.cpp:85
#, kde-format
msgid "Install and Configure Python"
msgstr ""
#. +> trunk5
#: ekos/align/opsalign.cpp:95
#, kde-format
msgid ""
"Homebrew is not installed. \n"
"A Terminal window will pop up for you to install Homebrew. \n"
" When you are all done, then you can close the Terminal and click the setup button again."
msgstr ""
#. +> trunk5
#: ekos/align/opsalign.cpp:117
#, kde-format
msgid ""
"Homebrew installed \n"
"Python3 will install when you click Ok \n"
"Astropy waiting . . . \n"
" (Note: this might take a few minutes, please be patient.)"
msgstr ""
#. +> trunk5
#: ekos/align/opsalign.cpp:122
#, kde-format
msgid "Python install failure"
msgstr ""
#. +> trunk5
#: ekos/align/opsalign.cpp:128
#, kde-format
msgid ""
"Homebrew installed \n"
"Python3 installed \n"
"Astropy will install when you click Ok \n"
" (Note: this might take a few minutes, please be patient.)"
msgstr ""
#. +> trunk5
#: ekos/align/opsalign.cpp:133
#, kde-format
msgid "Astropy install failure"
msgstr ""
#. +> trunk5
#: ekos/align/opsalign.cpp:137
#, kde-format
msgid "All installations are complete and ready to use."
"<p>Rotator threshold in arc-minutes when using Load & Slew. If the difference between measured position angle and FITS position angle is below this value, the Load & Slew operation is considered successful.</p>"
"<p>On Load & Slew, solve the image and slew the mount to the target location and then rotate the camera to match the orientation of the FITS image.</p>"
"<p>Automatically park mount after completing Polar Alignment Assistant Tools. Beware that turning this option off might lead to inaccurate results.</p>"
msgid "This will prevent the solver from looking at an already existing WCS Header before blindly trying to solve the image. It is recommended to keep it checked."
msgid "Do not use Sync when Slew to Target is selected. Use differential slewing to correct for discrepancies. This is useful on some mounts (e.g. Paramount)."
"<p><span style=\" font-weight:600;\">Offline</span> astrometry.net solver requires index files in order to solve an image. Please see the Astrometry.net <a href=\"http://astrometry.net/doc/readme.html\"><span style=\" text-decoration: underline; color:#0000ff;\">README</span></a> for details. The following list provides a complete list of the index files, along with recommended index files to install given the current CCD Field of View. Installed index files are checked. Next to each index file is an icon that represents the following:</p>"
"<p>This button will open the Astrometry Index File folder on your filesystem so that you can see where it is located and copy files into it if needed.</p>"
"<p>Enable Logs to diagnose issues with Ekos and INDI. Only enable the necessary logs to help in diagnosing specific problems. Logs consume resources and may slow the system down. Turn off logs when no longer used.</p>"
msgid "To assign a permanent designation to the device, you need to unplug the device from stellarmate then replug it after 1 second. Click on the <b>Start Scan</b> to begin this procedure."
msgstr ""
#. +> trunk5
#: ekos/auxiliary/serialportassistant.cpp:91
#, fuzzy, kde-format
msgid "Start Scan"
msgstr "Start skanning"
#. +> trunk5
#: ekos/auxiliary/serialportassistant.cpp:94
#, fuzzy, kde-format
msgid "Home"
msgstr "Hjem"
#. +> trunk5
#: ekos/auxiliary/serialportassistant.cpp:99
#, kde-format
msgid "Skip Device"
msgstr ""
#. +> trunk5
#: ekos/auxiliary/serialportassistant.cpp:103
#, kde-format
msgid "Physical Port Mapping"
msgstr ""
#. +> trunk5
#: ekos/auxiliary/serialportassistant.cpp:105
#, kde-format
msgid "Assign the permanent name based on which physical port the device is plugged to in StellarMate. This is useful to distinguish between two identical USB adapters. The device must <b>always</b> be plugged into the same port for this to work."
msgstr ""
#. +> trunk5
#: ekos/auxiliary/serialportassistant.cpp:142
#, fuzzy, kde-format
#| msgid "Scanning..."
msgid "Standby, Scanning..."
msgstr "Skanner …"
#. +> trunk5
#: ekos/auxiliary/serialportassistant.cpp:180
#, fuzzy, kde-format
#| msgid "ID"
msgctxt "Vendor ID"
msgid "VID"
msgstr "ID"
#. +> trunk5
#: ekos/auxiliary/serialportassistant.cpp:181
#, fuzzy, kde-format
#| msgid "PID"
msgctxt "Product ID"
msgid "PID"
msgstr "PID"
#. +> trunk5
#: ekos/auxiliary/serialportassistant.cpp:182
#, fuzzy, kde-format
msgid "Link"
msgstr "Lenke"
#. +> trunk5
#: ekos/auxiliary/serialportassistant.cpp:183
#, fuzzy, kde-format
#| msgid "Serial"
msgid "Serial #"
msgstr "Serie"
#. +> trunk5
#: ekos/auxiliary/serialportassistant.cpp:184
#, kde-format
msgid "Hardware Port?"
msgstr ""
#. +> trunk5
#: ekos/auxiliary/serialportassistant.cpp:241
#, fuzzy, kde-format
msgid "Start Scanning"
msgstr "Start skanning"
#. +> trunk5
#: ekos/auxiliary/serialportassistant.cpp:268
#, kde-format
msgid "Failed to scan devices."
msgstr ""
#. +> trunk5
#: ekos/auxiliary/serialportassistant.cpp:276
#: ekos/auxiliary/serialportassistant.cpp:286
#, kde-format
msgid "Failed to detect any devices. Please make sure device is powered and connected to StellarMate via USB."
msgstr ""
#. +> trunk5
#: ekos/auxiliary/serialportassistant.cpp:324
#, kde-format
msgid "Duplicate devices detected. You must remove one mapping or enable hardware slot mapping."
msgstr ""
#. +> trunk5
#: ekos/auxiliary/serialportassistant.cpp:343
#, kde-format
msgid "Mapping is successful. Please unplug and replug your device again now."
"<p>This tool shall assign <span style=\" font-style:italic;\">permanent</span> names to your <span style=\" font-weight:600;\">Serial to USB</span> devices so that they are easier to connect to in the future.</p>"
"<p><br/>"
"</p>"
"<p>Click <span style=\" font-weight:600;\">Next</span> to continue.</p>"
"<p>Accept ADU values that fall within this range around the desired ADU target. For example, if the ADU value was set to 10000 and the tolerance was set to 100, then frames with ADU values f 9900 and 10100 shall be accepted.</p>"
msgid "Meridian flip configuration has been shifted to the mount module. Please configure the meridian flip there."
msgstr ""
#. +> trunk5
-#: ekos/capture/capture.cpp:3877
+#: ekos/capture/capture.cpp:3879
#, fuzzy, kde-format
#| msgid "Sequence Queue"
msgid "Save Ekos Sequence Queue"
msgstr "Sekvenskø"
#. +> trunk5
-#: ekos/capture/capture.cpp:3907
+#: ekos/capture/capture.cpp:3909
#, kde-format
msgid "Failed to save sequence queue"
msgstr ""
#. +> trunk5
-#: ekos/capture/capture.cpp:3941
+#: ekos/capture/capture.cpp:3943
#, fuzzy, kde-format
msgid "Could not open file"
msgstr "Klarte ikke åpne fil"
#. +> trunk5
-#: ekos/capture/capture.cpp:3961
+#: ekos/capture/capture.cpp:3963
#, kde-format
msgid "Warning: HFR-based autofocus is set but option \"Save Sequence HFR Value to File\" is not enabled. Current HFR value will not be written to sequence file."
msgstr ""
#. +> trunk5
-#: ekos/capture/capture.cpp:4068
+#: ekos/capture/capture.cpp:4070
#, kde-format
msgid "Sequence queue saved to %1"
msgstr ""
#. +> trunk5
-#: ekos/capture/capture.cpp:4088
+#: ekos/capture/capture.cpp:4090
#, kde-format
msgid "Are you sure you want to reset status of all jobs?"
#. i18n("Ekos will refocus in %1 seconds, last procedure was %2 seconds ago.", refocusEveryNTimer.elapsed()/1000-refocusEveryNTimer.elapsed()*60, refocusEveryNTimer.elapsed()/1000));
#. +> trunk5
-#: ekos/capture/capture.cpp:6144
+#: ekos/capture/capture.cpp:6156
#, kde-format
msgid "Ekos will refocus in %1 seconds, last procedure was %2 seconds ago."
msgstr ""
#. +> trunk5
-#: ekos/capture/capture.cpp:6148
+#: ekos/capture/capture.cpp:6160
#, kde-format
msgid "Ekos will refocus as soon as possible, last procedure was %1 seconds ago."
"<li><strong>Client</strong>: Captured images are only uploaded to Ekos.</li>"
"\n"
"<li><strong>Local</strong>: Captured images are only saved locally on the remote computer.</li>"
"\n"
"<li><strong>Both</strong>: Captured images are saved on remote device <b>and</b> uploaded to Ekos.</li>"
"\n"
"</ol>"
"\n"
"<p>When selecting <i>Local</i> or <i>Both</i>, you must specify the remote directory where the remote images are saved to. By default, all captured images are uploaded to Ekos."
"<p>Select custom properties to be set when the sequence job is executed in batch mode. After the desired property value is set in INDI Control Panel, add it to the<span style=\" font-weight:600;\"> Job Properties</span> section. Click <span style=\" font-weight:600;\">Apply</span> to record the property values.</p>"
"<p>Please fill the required information below. This is a one-time setup. You can obtain these values from your camera manual or from online sources such as <a href=\"http://www.digicamdb.com/\"><span style=\" text-decoration: underline; color:#007af4;\">Digital Camera Database</span></a>.</p>"
"<p>Position Angle (PA) is defined as degrees E of N. Zero degrees indicate frame <span style=\" font-weight:600;\">UP</span> points directly toward the celestial pole. 90 degrees indicate frame <span style=\" font-weight:600;\">UP</span> points 90 degrees counter-clockwise with respect to the celestial pole.</p>"
"<p>PA is calculated from raw rotator angle plus modifiers to match the rotation angle as measured by astrometry. Enter the modifiers manually or solve an image in the Align Module to generate them automatically.</p>"
"<p>Measure average HFR from all stars combined in a full frame. This method defaults to the Centroid detection, but can use SEP detection too. Its performance decreases as the number of stars increases.</p>"
"<p>During full field focusing, stars which are inside this percentage of the frame are filtered out of HFR calculation (default 0%). Detection algorithms may also have an inherent filter.</p>"
"<p>During full field focusing, stars which are outside this percentage of the frame are filtered out of HFR calculation (default 100%). Detection algorithms may also have an inherent filter.</p>"
msgid "<b>Initial</b> step size in ticks to cause a noticeable change in HFR value. For timer based focuser, it is the initial time in milliseconds to move the focuser inward or outward"
"<li><b>Iterative</b>: Moves focuser by discreet steps initially decided by the step size. Once a curve slope is calculated, further step sizes are calculated to reach optimal solution. The algorithm stops when the measured HFR is within percentage tolerance of the minimum HFR recorded in the procedure.</li>"
"\n"
"<li><b>Polynomial</b>: Starts with iterative method. Upon crossing to the other side of the V-Curve, polynomial fitting coefficients along with possible minimum solution are calculated. This algorithm can be faster than purely iterative approach given a good data set.</li>"
msgid "You must stop auto guiding before changing this setting."
msgstr "Du må stoppe autoguiding før denne innstillingen endres."
#. +> trunk5
#: ekos/guide/guide.cpp:2273
#, kde-format
msgid "Rapid Guiding is enabled. Guide star will be determined automatically by the CCD driver. No frames are sent to Ekos unless explicitly enabled by the user in the CCD driver settings."
msgstr "Hurtig-guiding er slått på. CCD-driveren bestemmer automatisk guide-stjernen. Ingen bilderammer sendes til Ekos hvis ikke brukeren uttrykkelig hat slått det på i innstillingene for CCD-driveren."
#. +> trunk5
#: ekos/guide/guide.cpp:2276
#, kde-format
msgid "Rapid Guiding is disabled."
msgstr "Hurtig-guiding er slått av."
#. +> trunk5
#: ekos/guide/guide.cpp:2538
#, kde-format
msgctxt "Drift graphics tooltip; %1 is local time; %2 is RA deviation; %3 is DE deviation in arcseconds;"
"<p>Subframe the image around the guide star. Before checking this option, you must <span style=\" font-weight:600;\">first</span> capture an image and select a guide star. Uncheck it to take a full frame again.</p>"
msgid "Mount guiding rate. Find out the guiding rate used by your mount and update the value here to get the <b>recommended</b> value of proportional gain suitable for your mount. Setting this value <b>does not</b> change your mount guiding rate."
"<p>Proportional term accounts for present values of the error. For example, if the error is large and positive, the guider corrective pulse will also be large and positive.</p>"
"<p>Integral term accounts for past values of the error. For example, if the current pulse is not sufficiently strong, the integral of the error will accumulate over time, and the guider will respond by applying a stronger action.</p>"
msgid "Maximum deviation to correct for using Adaptive Optics unit. If the guiding deviation exceeds this value, Ekos will guide the mount mechanically"
"<p>Drag the slider to scroll through guide history while displaying the RA and DEC error points on both graphs. Dragging to the far right will set the guide plots to display the latest guide data and autoscroll the graph.</p>"
"<p>Autoscale both Guide Graphs to their default scale. If any points are located outside this range, the view is expanded to include them (with the exception of the time axis in the drift graphics).</p>"
"<p>Request a meridian flip if the hour angle exceeds the specified value. Capture and Guiding will be suspended and resumed after the flip is complete.</p>"
"<p>Set Hour Angle unit to Degrees. Add 1 degree to the mount meridian flip setting. For example, if the mount meridian flip limit is set to 5 degrees, set the value here to be <span style=\" font-weight:600;\">at least</span> 6 degrees to ensure a successful meridian flip.</p>"
"<p>Lead time is the minimum time in minutes between jobs. The scheduler starts execution of a job before its scheduled startup time by this lead time. Early execution is useful as focusing, alignment, and guiding procedures may take prolonged periods to time to complete.</p>"
"<p>In case no scheduler job is scheduled for this many hours, perform a complete shutdown procedure and restart observatory operations once the next job is ready.</p>"
"<p>Do not permit jobs to be scheduled less than this many degrees before the altitude restriction. Actual execution proceeds until the altitude limit.</p>"
"<p>If guiding calibration fails then restart alignment process before proceeding to guiding recalibration process again. This can help recenter the target object in the field of view if the calibration process strayed too far off.</p>"
msgid "Maximum acceptable difference between requested and measured temperature set point. When the temperature threshold is below this value, the temperature set point request is deemed successful."
#. i18n: ectx: label, entry (AlwaysResetSequenceWhenStarting), group (Capture)
#. +> trunk5
#: ekos/opsekos.ui:459 kstars.kcfg:1660
#, kde-format
msgid ""
"<html><head/><body>"
"<p>When starting to process a sequence list, reset all capture counts to zero. Scheduler overrides this option when Remember Job Progress is enabled.</p>"
"<p>If using a filter wheel and an absolute position focuser, then always remember the focus position of the autofocus process for light frames in each filter. Before a flat frame is captured, the focuser is moved to the same focus point as light frames.</p>"
"<p>Set HFR Threshold percentage gain. When an autofocus operation is completed, the autofocus HFR value is increased by this threshold percentage value and stored within the capture module. If In-Sequence-Focus is engaged, the autofocus module only performs autofocusing procedure if current HFR value exceeds the capture module HFR threshold. Increase value to permit more relaxed changes in HFR values without requiring a full autofocus run.</p>"
"<p>Calculate median focus value after each autofocus operation is complete. If the autofocus results become progressively worse with time, the median value shall reflect this trend and prevent unnecessary autofocus operations when the seeing conditions deteriorate.</p>"
"<p>In-Sequence HFR threshold value controls when the autofocus process is started. If the measured HFR value exceeds the HFR threshold, autofocus process is initiated. If the HFR threshold value is zero initially (default), then the autofocus process best HFR value is used to set the new HFR threshold, after applying the HFR threshold modifier percentage. This new HFR threshold is then used for subsequent In-Sequence focus checks. If this option is enabled, the HFR threshold value is constant and gets saved to the sequence file.</p>"
#. i18n: ectx: label, entry (MaxDarkTemperatureDiff), group (DarkLibrary)
#. +> trunk5
#: ekos/opsekos.ui:686 kstars.kcfg:1521
#, kde-format
msgid "Maximum acceptable difference between current and recorded dark frame temperature set point. When the difference exceeds this value, a new dark frame shall be captured for this set point."
"<p>Specify Remote drivers to chain with INDI server. Remote INDI drivers must be already running. If port is different from the default (7624), then it must be specified. For example, to connect to ZWO ASI120MC driver running on 192.168.1.50 on port 8000, the connection string is:</p>"
"<p>Welcome to the <span style=\" font-weight:600;\">Ekos Profile Wizard</span></p>"
"<p>Ekos is the premier observatory control and automation platform. With Ekos, you can capture images and gather scientific data with ease. This Wizard will help you create your equipment profile. You will be asked to verify some basic information. </p>"
"<p>Please click <span style=\" font-weight:600;\">next</span> to continue. </p>"
"<p><a href=\"https://github.com/knro/indiwebmanager\"><span style=\" text-decoration: underline; color:#007af4;\">INDI Web Manager</span></a> running on the Remote Computer?</p>"
"<p><span style=\" font-weight:600;\">Tip</span>: <span style=\" font-style:italic;\">INDI Web Manager</span> is a service that runs on remote devices to help you start and stop INDI services remotely.</p>"
"<p><span style=\" font-weight:600;\">Tip</span>: External INDI Server can be <a href=\"http://www.cloudmakers.eu/indiserver/\"><span style=\" text-decoration: underline; color:#007af4;\">INDI Server for OSX</span></a> or an INDI Server launched manually locally. If unsure, select Internal INDI Server.</p>"
"<p><span style=\" font-weight:600;\">Tip</span>: Internal Guider is recommended. Using external guider applications requires additional setup instructions outside the scope of Ekos.</p>"
"<p>If the remote computer has astrometry.net installed, you can run the remote astrometry driver and use it to solve images in Ekos Align module.</p>"
"<p>Use the INDI WatchDog driver. It monitors connection between your remote equipment and Ekos. If the communication is lost between the two, the WatchDog driver goes into safe mode and executes a shutdown procedure to protect your equipment.</p>"
"<p>If you plan to use SkySafari to monitor and/or control your mount, check this box to start INDI SkySafari Server. You can connect SkySafari to this server and it shall enable you to connect and control your mount. For more details, please check the <a href=\"http://indilib.org/devices/telescopes/skysafari.html\"><span style=\" text-decoration: underline; color:#007af4;\">INDI SkySafari Documentation.</span></a></p>"
msgid "Camera's rotation angle (East of North) in degrees. To measure the angle, solve an image and use the astrometry solver solution's rotation angle"
msgid "Warning: job '%1' has startup time %2 resulting in a negative score, and will be marked invalid when processed."
msgstr "Park"
#. +> trunk5
-#: ekos/scheduler/scheduler.cpp:687
+#: ekos/scheduler/scheduler.cpp:769
#, kde-format
msgid "Warning: job '%1' at row %2 has a duplicate target at row %3, the scheduler may consider the same storage for captures."
msgstr ""
#. +> trunk5
-#: ekos/scheduler/scheduler.cpp:695
+#: ekos/scheduler/scheduler.cpp:777
#, kde-format
msgid "Warning: jobs '%1' at row %2 and %3 probably require a different repeat count as currently they will complete simultaneously after %4 batches (or disable option 'Remember job progress')"
msgstr ""
#. +> trunk5
-#: ekos/scheduler/scheduler.cpp:700
+#: ekos/scheduler/scheduler.cpp:782
#, kde-format
msgid "Warning: job '%1' at row %2 might require a specific startup time or a different priority, as currently they will start in order of insertion in the table"
msgstr ""
#. +> trunk5
-#: ekos/scheduler/scheduler.cpp:874
+#: ekos/scheduler/scheduler.cpp:956
#, kde-format
msgid "Warning: you cannot add or modify a job while the scheduler is running."
msgstr ""
#. +> trunk5
-#: ekos/scheduler/scheduler.cpp:942
+#: ekos/scheduler/scheduler.cpp:1024
#, kde-format
msgid "Use edition fields to create a new job in the observation list."
msgstr ""
#. +> trunk5
-#: ekos/scheduler/scheduler.cpp:1201
+#: ekos/scheduler/scheduler.cpp:1283
#, fuzzy, kde-format
msgid "Job '%1' has not been processed upon scheduler stop, marking aborted."
msgstr "Park"
#. +> trunk5
-#: ekos/scheduler/scheduler.cpp:1208
+#: ekos/scheduler/scheduler.cpp:1290
#, fuzzy, kde-format
#| msgid "Schedule a time"
msgid "Scheduler aborted."
msgstr "Planlegg en tid"
#. +> trunk5
-#: ekos/scheduler/scheduler.cpp:1267
+#: ekos/scheduler/scheduler.cpp:1349
#, kde-format
msgid "Scheduler is in shutdown until next job is ready"
msgid "Select optional FITS file to be used for alignment. When using FITS, specify the object or the estimated coordinates which are used to slew the mount."
msgid "Start the observation job when the object reaches culmination adjusted for the offset value in minutes. By default, the observation job runs 60 minutes prior to culmination."
"<li style=\" margin-top:12px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-weight:600;\">Don't re-schedule</span>: Don't restart the job in case of an error or an abort.</li>"
"<li style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-weight:600;\">Re-schedule after all terminated</span>: If a job gets aborted, the scheduler will only re-schedule it if when all jobs are finished or aborted. If this is the case, the scheduler re-schedules all aborted jobs and sleeps for the given delay.</li>"
"<li style=\" margin-top:0px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-weight:600;\">Re-schedule immediately</span>: As soon as a job gets aborted, the scheduler will re-schedule it and waits the given delay.</li>"
"</ul>"
"<p>If the option for re-scheduling errors is selected, errors are handled like aborts. Otherwise, jobs that step into an error are never re-scheduled.</p>"
"<p>One-time startup procedure to be executed before starting Ekos. The script is executed <span style=\" font-weight:600; text-decoration: underline;\">before</span> the startup procedures (e.g. unpark scope), if selected, are executed.</p>"
"<p>One-time shutdown procedure to be executed after all scheduler jobs are completed. The script is executed <span style=\" font-weight:600; text-decoration: underline;\">after</span> the shutdown procedures (e.g. parking), if selected, are completed.</p>"
"Current status of job '%1', managed by the Scheduler.\n"
"If invalid, the Scheduler was not able to find a proper observation time for the target.\n"
"If aborted, the Scheduler missed the scheduled time or encountered transitory issues and will reschedule the job.\n"
"If complete, the Scheduler verified that all sequence captures requested were stored, including repeats."
msgstr ""
#. +> trunk5
#: ekos/scheduler/schedulerjob.cpp:239
#, kde-format
msgid ""
"Current altitude of the target of job '%1'.\n"
"The altitude at startup, if available, is displayed between parentheses.\n"
"A rising target is indicated with an arrow going up.\n"
"A setting target is indicated with an arrow going down."
msgstr ""
#. +> trunk5
#: ekos/scheduler/schedulerjob.cpp:250
#, kde-format
msgid ""
"Startup time for job '%1', as estimated by the Scheduler.\n"
"Fixed time from user or culmination time is marked with a chronometer symbol. "
msgstr ""
#. +> trunk5
#: ekos/scheduler/schedulerjob.cpp:259
#, kde-format
msgid ""
"Completion time for job '%1', as estimated by the Scheduler.\n"
"You may specify a fixed time to limit duration of looping jobs. A warning symbol indicates the altitude at completion may cause the job to abort before completion.\n"
msgstr ""
#. +> trunk5
#: ekos/scheduler/schedulerjob.cpp:269
#, kde-format
msgid ""
"Count of captures stored for job '%1', based on its sequence job.\n"
"This is a summary, additional specific frame types may be required to complete the job."
msgstr ""
#. +> trunk5
#: ekos/scheduler/schedulerjob.cpp:278
#, kde-format
msgid ""
"Current score for job '%1', from its altitude, moon separation and sky darkness.\n"
"Negative if adequate altitude is not achieved yet or if there is no proper observation time today.\n"
"The Scheduler will refresh scores when picking a new candidate job."
msgstr ""
#. +> trunk5
#: ekos/scheduler/schedulerjob.cpp:288
#, kde-format
msgid ""
"Time interval from the job which precedes job '%1'.\n"
"Adjust the Lead Time in Ekos options to increase that duration and leave time for jobs to complete.\n"
"Rearrange jobs to minimize that duration and optimize your imaging time."
msgstr ""
#. +> trunk5
#: ekos/scheduler/schedulerjob.cpp:374
#, kde-format
msgid ""
"Duration job '%1' will take to complete when started, as estimated by the Scheduler.\n"
"Depends on the actions to be run, and the sequence job to be processed."
"<li style=\" margin-top:12px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-weight:600;\">Auto Debayer</span>: Bayered images will not be debayered. Only grayscale images are shown.</li>"
"<li style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-weight:600;\">Auto WCS</span>: World Coordinate System data will not be processed. WCS maps sky coordinates to image coordinates. Equatorial grid lines, object identification, and telescope slew within an image are disabled.</li>"
"<li style=\" margin-top:0px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-weight:600;\">3D Cube</span>: RGB images will not be processed. Only grayscale images are shown.</li>"
"<p>Automatically load World-Coordinate-System (WCS) data when opening a FITS file.</p>"
"<p><span style=\" font-weight:600;\">Warning: Only enable this option on very fast machines as it can lead to unpredictable behavior resulting in crashes on slower machines.</span></p>"
"<p>To create an <span style=\" font-weight:600;\">Alias</span> from an existing driver, select an existing driver and then only change the <span style=\" font-weight:600;\">Label </span>then press<span style=\" font-weight:600;\"> Add.</span></p>"
"<p>Mount handset is the master source of time and location settings. KStars time and location settings are synchronized with controller settings.</p>"
"<p>Set SER video <b>remote</b> directory name. If INDI server is running locally, then a local directory can be selected. However, if you are connected to a remote INDI server, then the directory must be a valid directory on the remote file system where it is saved.</p>"
"\n"
"<p>Record directories may contain some patterns to make them dynamic:</p>"
"Verify if the following time, date, and location settings are correct. If any of the settings are incorrect, you can correct them via the <tt>Set time</tt> and <tt>Set Location</tt> buttons.\n"
msgstr ""
"<h3>3. Sjekk lokale innstillinger</h3>"
"\n"
"\n"
"Se etter om følgende innstillinger for tid, dato og sted er riktige. Hvis noe av det ikke er riktig, kan du rette på det med <tt>Sett tid</tt> og <tt>Sett sted</tt>-knappene.\n"
#| "Enter the port number your telescope is connected to. If you only have one serial port in your computer, the port is usually <tt>/dev/ttyS0</tt>\n"
#| "<br>"
#| "<br>"
#| "If you are unsure about the port number, you can leave the field empty and KStars will try to scan the ports for attached telescopes. Beware that the autoscan process might take a few minutes to complete. "
msgid ""
"<h3>4. Determine Connection Port</h3>"
"\n"
"\n"
"Enter the port number your telescope is connected to. If you only have one serial port in your computer, the port is usually <tt>/dev/ttyUSB0</tt>\n"
"<br>"
"<br>"
"If you are unsure about the port number, you can leave the field empty and KStars will try to scan the ports for attached telescopes. Beware that the autoscan process might take a few minutes to complete. "
msgstr ""
"<h3>4. Bestem tilkoblingsport</h3>"
"\n"
"\n"
"Oppgi portnummer som teleskopet er koblet til. Hvis du har bare én serieport i datamaskinen, så er et vanligvis <tt>/dev/ttyS0</tt>\n"
"<br/>"
"<br/>"
"Hvis du er usikker på portnummeret, så kan du la feltet stå tomt, da vil KStars forsøke å undersøke portene for å finne tilkoblede teleskoper. Merk at denne prosessen kan ta noen minutter. "
msgid "Switch to horizonal view (Horizontal &Coordinates)"
msgstr "Bytt til horisontalvisning (Horisont&koordinater)"
#. i18n: ectx: label, entry (PositionTimeBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:9
#, kde-format
msgid "Position of the time InfoBox."
msgstr "Plassering av tids-infoboksen."
#. i18n: ectx: whatsthis, entry (PositionTimeBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:10
#, kde-format
msgid "The screen coordinates of the Time InfoBox."
msgstr "Skjermkoordinater for tids-infoboksen."
#. i18n: ectx: label, entry (PositionFocusBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:14
#, kde-format
msgid "Position of the focus InfoBox."
msgstr "Plassering av fokus-infoboksen."
#. i18n: ectx: whatsthis, entry (PositionFocusBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:15
#, kde-format
msgid "The screen coordinates of the Focus InfoBox."
msgstr "Skjermkoordinater for fokus-infoboksen."
#. i18n: ectx: label, entry (PositionGeoBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:19
#, kde-format
msgid "Position of the geographic InfoBox."
msgstr "Plassering av geografisk infoboks."
#. i18n: ectx: whatsthis, entry (PositionGeoBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:20
#, kde-format
msgid "The screen coordinates of the Geographic Location InfoBox."
msgstr "Skjermkoordinater for infoboks med geografisk sted."
#. i18n: ectx: label, entry (ShadeTimeBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:24
#, kde-format
msgid "Is the time InfoBox in the \"shaded\" state?"
msgstr "Er tids-infoboksen «rullet»?"
#. i18n: ectx: whatsthis, entry (ShadeTimeBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:25
#, kde-format
msgid "If true, the Time InfoBox will show only its top line of data."
msgstr "Hvis dette er på, viser tidsinfoboksen bare den øverste linja med data."
#. i18n: ectx: label, entry (ShadeFocusBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:29
#, kde-format
msgid "Is the focus InfoBox in the \"shaded\" state?"
msgstr "Er fokus-infoboksen «rullet»?"
#. i18n: ectx: whatsthis, entry (ShadeFocusBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:30
#, kde-format
msgid "If true, the Focus InfoBox will show only its top line of data."
msgstr "Hvis dette er på, viser fokus-infoboksen bare den øverste linja med data."
#. i18n: ectx: label, entry (ShadeGeoBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:34
#, kde-format
msgid "Is the geographic InfoBox in the \"shaded\" state?"
msgstr "Er infoboksen for geografi «rullet»?"
#. i18n: ectx: whatsthis, entry (ShadeGeoBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:35
#, kde-format
msgid "If true, the Geographic Location InfoBox will show only its top line of data."
msgstr "Hvis dette er på, viser geografi-infoboksen bare den øverste linja med data."
#. i18n: ectx: label, entry (ShowInfoBoxes), group (GUI)
#. +> trunk5
#: kstars.kcfg:39
#, kde-format
msgid "Meta-option to toggle display of all InfoBoxes"
msgstr "Meta-valg for å slå av/på visning av alle infobokser"
#. i18n: ectx: whatsthis, entry (ShowInfoBoxes), group (GUI)
#. +> trunk5
#: kstars.kcfg:40
#, kde-format
msgid "Toggles display of all three InfoBoxes."
msgstr "Slår av/på visning av alle infobokser."
#. i18n: ectx: label, entry (ShowTimeBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:44
#, kde-format
msgid "Display the time InfoBox?"
msgstr "Vis tids-infoboksen?"
#. i18n: ectx: whatsthis, entry (ShowTimeBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:45
#, kde-format
msgid "Toggles display of the Time InfoBox."
msgstr "Slår av/på visning av tids-infoboksen."
#. i18n: ectx: label, entry (ShowFocusBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:49
#, kde-format
msgid "Display the focus InfoBox?"
msgstr "Vis fokus-infoboksen?"
#. i18n: ectx: whatsthis, entry (ShowFocusBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:50
#, kde-format
msgid "Toggles display of the Focus InfoBox."
msgstr "Slår av/på visning av fokus-infoboksen."
#. i18n: ectx: label, entry (ShowGeoBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:54
#, kde-format
msgid "Display the geographic InfoBox?"
msgstr "Vis geografisk infoboks?"
#. i18n: ectx: whatsthis, entry (ShowGeoBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:55
#, kde-format
msgid "Toggles display of the Geographic Location InfoBox."
msgstr "Slår av/på visning av geografisk infoboks."
#. i18n: ectx: label, entry (StickyTimeBox), group (GUI)
#. i18n: ectx: label, entry (StickyFocusBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:59 kstars.kcfg:66
#, kde-format
msgid "Time InfoBox anchor flag"
msgstr "Ankermerke for tids-infoboks"
#. i18n: ectx: whatsthis, entry (StickyTimeBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:60
#, fuzzy, kde-format
#| msgid "Is the Time InfoBox anchored to a window edge? 0 = not anchored; 1 = anchored to right edge; 2 = anchored to bottom edge; 3 = anchored to bottom and right edges."
msgid "Is the Time InfoBox anchored to a window edge? 0 = not anchored; 1 = anchored to right edge; 2 = anchored to bottom edge; 3 = anchored to bottom and right edges."
msgstr "Er tids-infoboksen forankret til en vinduskant? 0 = ikke forankret, 1 = forankret til høyre kant, 2 = forankret til nedre kant, 3 = forankret til nedre og høyre kanter."
#. i18n: ectx: whatsthis, entry (StickyFocusBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:67
#, fuzzy, kde-format
#| msgid "Is the Focus InfoBox anchored to a window edge? 0 = not anchored; 1 = anchored to right edge; 2 = anchored to bottom edge; 3 = anchored to bottom and right edges."
msgid "Is the Focus InfoBox anchored to a window edge? 0 = not anchored; 1 = anchored to right edge; 2 = anchored to bottom edge; 3 = anchored to bottom and right edges."
msgstr "Er fokus-infoboksen forankret til en vinduskant? 0 = ikke forankret, 1 = forankret til høyre kant, 2 = forankret til nedre kant, 3 = forankret til nedre og høyre kanter."
#. i18n: ectx: label, entry (StickyGeoBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:73
#, kde-format
msgid "Geographic InfoBox anchor flag"
msgstr "Ankermerke for geografisk infoboks"
#. i18n: ectx: whatsthis, entry (StickyGeoBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:74
#, fuzzy, kde-format
#| msgid "Is the Geographic Location InfoBox anchored to a window edge? 0 = not anchored; 1 = anchored to right edge; 2 = anchored to bottom edge; 3 = anchored to bottom and right edges."
msgid "Is the Geographic Location InfoBox anchored to a window edge? 0 = not anchored; 1 = anchored to right edge; 2 = anchored to bottom edge; 3 = anchored to bottom and right edges."
msgstr "Er den geografiske infoboksen forankret til en vinduskant? 0 = ikke forankret, 1 = forankret til høyre kant, 2 = forankret til nedre kant, 3 = forankret til nedre og høyre kanter."
#. i18n: ectx: label, entry (ShowStatusBar), group (GUI)
#. +> trunk5
#: kstars.kcfg:80
#, kde-format
msgid "Display the statusbar?"
msgstr "Vis statuslinja?"
#. i18n: ectx: whatsthis, entry (ShowStatusBar), group (GUI)
#. +> trunk5
#: kstars.kcfg:81
#, kde-format
msgid "Toggle display of the status bar."
msgstr "Slå av/på visning av statuslinja."
#. i18n: ectx: label, entry (ShowAltAzField), group (GUI)
#. +> trunk5
#: kstars.kcfg:85
#, kde-format
msgid "Display Alt/Az coordinates in the statusbar?"
msgstr "Vis Alt/Az-koordinater på statuslinja?"
#. i18n: ectx: whatsthis, entry (ShowAltAzField), group (GUI)
#. +> trunk5
#: kstars.kcfg:86
#, kde-format
msgid "Toggle display of the Horizontal coordinates of the mouse cursor in the status bar."
msgstr "Slår på/av visning av musepekerens horisont-koordinater på statuslinja."
#. i18n: ectx: label, entry (ShowRADecField), group (GUI)
#. +> trunk5
#: kstars.kcfg:90
#, kde-format
msgid "Display RA/Dec coordinates in the statusbar?"
msgstr "Vis RA/Dek-koordinater i statuslinja?"
#. i18n: ectx: whatsthis, entry (ShowRADecField), group (GUI)
#. +> trunk5
#: kstars.kcfg:91
#, fuzzy, kde-format
#| msgid "Toggle display of the Equatorial coordinates of the mouse cursor in the status bar."
msgid "Toggle display of the Equatorial coordinates of the mouse cursor at the current epoch in the status bar."
msgstr "Slår på/av visning av musepekerens ekvatorial-koordinater på statuslinja."
#. i18n: ectx: label, entry (ShowJ2000RADecField), group (GUI)
#. +> trunk5
#: kstars.kcfg:95
#, fuzzy, kde-format
#| msgid "Display RA/Dec coordinates in the statusbar?"
msgid "Display J2000.0 RA/Dec coordinates in the statusbar?"
msgstr "Vis RA/Dek-koordinater i statuslinja?"
#. i18n: ectx: whatsthis, entry (ShowJ2000RADecField), group (GUI)
#. +> trunk5
#: kstars.kcfg:96
#, fuzzy, kde-format
#| msgid "Toggle display of the Equatorial coordinates of the mouse cursor in the status bar."
msgid "Toggle display of the Equatorial coordinates of the mouse cursor at the standard epoch in the status bar."
msgstr "Slår på/av visning av musepekerens ekvatorial-koordinater på statuslinja."
#. i18n: ectx: label, entry (ShowSensorFOV), group (GUI)
#. +> trunk5
#: kstars.kcfg:100
#, kde-format
msgid "Display CCD sensor angular size on the sky map?"
msgstr ""
#. i18n: ectx: label, entry (WindowWidth), group (GUI)
#. +> trunk5
#: kstars.kcfg:104
#, kde-format
msgid "Width of main window, in pixels"
msgstr "Bredde for hovedvinduet, i piksler"
#. i18n: ectx: label, entry (WindowHeight), group (GUI)
#. +> trunk5
#: kstars.kcfg:108
#, kde-format
msgid "Height of main window, in pixels"
msgstr "Høyde for hovedvinduet, i piksler"
#. i18n: ectx: label, entry (RunStartupWizard), group (GUI)
#. +> trunk5
#: kstars.kcfg:112
#, kde-format
msgid "Run Startup Wizard when KStars launches?"
msgstr "Kjøre oppstartsveiviseren når KStars startes?"
#. i18n: ectx: label, entry (CurrentTheme), group (GUI)
#. +> trunk5
#: kstars.kcfg:116
#, fuzzy, kde-format
#| msgid "Current application"
msgid "Current application theme"
msgstr "Gjeldende program"
#. i18n: ectx: label, entry (CatalogFile), group (Catalogs)
#. +> trunk5
#: kstars.kcfg:123
#, kde-format
msgid "Filenames of defined custom object catalogs."
msgstr "Filnavn på definerte selvvalgte objektkataloger."
#. i18n: ectx: whatsthis, entry (CatalogFile), group (Catalogs)
#. +> trunk5
#: kstars.kcfg:124
#, kde-format
msgid "List of the filenames of custom object catalogs."
msgstr "Liste over filnavnene for selvvalgte objektkataloger."
#. i18n: ectx: label, entry (ShowCatalog), group (Catalogs)
#. +> trunk5
#: kstars.kcfg:127
#, kde-format
msgid "List of toggles for displaying custom object catalogs."
msgstr "Liste over brytere for å vise selvvalgte objektkataloger."
#. i18n: ectx: whatsthis, entry (ShowCatalog), group (Catalogs)
#. +> trunk5
#: kstars.kcfg:128
#, kde-format
msgid "List of integers toggling display of each custom object catalog (any nonzero value indicates the objects in that catalog will be displayed)."
msgstr "Liste over heltall som slår av/på visning av hver selvvalgte objektkatalog (et tall som ikke er null angir at objektene i den kaatalogen blir vist)."
#. i18n: ectx: label, entry (ShowCatalogNames), group (Catalogs)
#. +> trunk5
#: kstars.kcfg:131
#, kde-format
msgid "List for displaying custom object catalogs."
msgstr "Liste for å vise selvvalgte objektkataloger."
#. i18n: ectx: whatsthis, entry (ShowCatalogNames), group (Catalogs)
#. +> trunk5
#: kstars.kcfg:132
#, kde-format
msgid "List of names for which custom catalogs are to be displayed."
msgstr "Liste over navn som egendefinerte kataloger skal vises for"
#. i18n: ectx: label, entry (ResolveNamesOnline), group (Catalogs)
#. +> trunk5
#: kstars.kcfg:135
#, kde-format
msgid "Resolve names using online services."
msgstr ""
#. i18n: ectx: whatsthis, entry (ResolveNamesOnline), group (Catalogs)
#. +> trunk5
#: kstars.kcfg:136
#, kde-format
msgid "Names of objects entered into the find dialog are resolved using online services and stored in the database. This option also toggles the display of such resolved objects on the sky map."
msgstr ""
#. i18n: ectx: label, entry (INDIWindowWidth), group (indi)
#. +> trunk5
#: kstars.kcfg:143
#, fuzzy, kde-format
#| msgctxt "@label"
#| msgid "Window width"
msgid "INDI window width"
msgstr "Vindusbredde"
#. i18n: ectx: label, entry (INDIWindowHeight), group (indi)
#. +> trunk5
#: kstars.kcfg:147
#, fuzzy, kde-format
#| msgctxt "@label"
#| msgid "Window height"
msgid "INDI window height"
msgstr "Vindushøyde"
#. i18n: ectx: label, entry (useGeographicUpdate), group (indi)
msgstr "Still inn automatisk teleskopets geografiske sted?"
#. i18n: ectx: label, entry (useTimeUpdate), group (indi)
#. +> trunk5
#: kstars.kcfg:155
#, kde-format
msgid "Automatically updates time and date?"
msgstr "Skal teleskopets dato og klokke stilles automatisk?"
#. i18n: ectx: label, entry (independentWindowINDI), group (indi)
#. +> trunk5
#: kstars.kcfg:159
#, kde-format
msgid "Make INDI Control Panel window independent of KStars main window"
msgstr ""
#. i18n: ectx: label, entry (showTargetCrosshair), group (indi)
#. +> trunk5
#: kstars.kcfg:163
#, kde-format
msgid "Draw crosshairs at telescope position in the sky map?"
msgstr "Skal teleskop-posisjonen på himmelkartet markeres med trådkors?"
#. i18n: ectx: whatsthis, entry (showTargetCrosshair), group (indi)
#. +> trunk5
#: kstars.kcfg:164
#, kde-format
msgid "Toggle display of crosshairs centered at telescope's pointed position in the KStars sky map."
msgstr "Slå på/av trådkors sentrert på det stedet teleskopet peker på i KStars' himmelkart."
#. i18n: ectx: label, entry (showINDIMessages), group (indi)
#. +> trunk5
#: kstars.kcfg:168
#, kde-format
msgid "Display INDI messages in the statusbar?"
msgstr "Vise INDI-meldinger på statuslinja?"
#. i18n: ectx: whatsthis, entry (showINDIMessages), group (indi)
#. +> trunk5
#: kstars.kcfg:169
#, kde-format
msgid "Toggle display of INDI messages in the KStars statusbar."
msgstr "Slå på/av visning av INDI-meldinger på KStars' statuslinje."
#. i18n: ectx: label, entry (messageNotificationINDI), group (indi)
#. +> trunk5
#: kstars.kcfg:173
#, fuzzy, kde-format
#| msgid "Use notifications"
msgid "INDI message notifications"
msgstr "Bruk varslinger"
#. i18n: ectx: whatsthis, entry (messageNotificationINDI), group (indi)
#. +> trunk5
#: kstars.kcfg:174
#, kde-format
msgid "Show INDI messages as desktop notifications instead of dialogs."
msgstr ""
#. i18n: ectx: label, entry (useKStarsSource), group (indi)
#. +> trunk5
#: kstars.kcfg:178
#, fuzzy, kde-format
#| msgid "Use computer time and location for synchronization?"
msgid "Use KStars time and location for synchronization?"
msgstr "Skal datamaskinens tid og sted brukes til synkronisering?"
#. i18n: ectx: label, entry (useMountSource), group (indi)
#. +> trunk5
#: kstars.kcfg:182
#, fuzzy, kde-format
#| msgid "Use computer time and location for synchronization?"
msgid "Use mount time and location for synchronization?"
msgstr "Skal datamaskinens tid og sted brukes til synkronisering?"
#. i18n: ectx: label, entry (useGPSSource), group (indi)
#. +> trunk5
#: kstars.kcfg:186
#, fuzzy, kde-format
#| msgid "Use device time and location for synchronization?"
msgid "Use GPS time and location for synchronization?"
msgstr "Skal enhetens tid og sted brukes til synkronisering?"
#. i18n: ectx: label, entry (fitsDir), group (indi)
#. +> trunk5
#: kstars.kcfg:190
#, kde-format
msgid "FITS Default directory"
msgstr "Standard FITS-mappe"
#. i18n: ectx: whatsthis, entry (fitsDir), group (indi)
#. +> trunk5
#: kstars.kcfg:191
#, kde-format
msgid "The default location of saved FITS files"
msgstr "Standardmappe for lagrede FITS-filer"
#. i18n: ectx: label, entry (serverPortStart), group (indi)
#. +> trunk5
#: kstars.kcfg:195
#, kde-format
msgid "INDI Server Start Port"
msgstr "Startport for INDI-tjener"
#. i18n: ectx: whatsthis, entry (serverPortStart), group (indi)
#. +> trunk5
#: kstars.kcfg:196
#, kde-format
msgid "INDI server will attempt to bind with ports starting from this port"
msgstr "INDI-tjeneren vil forsøke å binde til porter, begynner med denne porten"
#. i18n: ectx: label, entry (serverPortEnd), group (indi)
#. +> trunk5
#: kstars.kcfg:200
#, kde-format
msgid "INDI Server Final Port"
msgstr "Sluttport for INDI-tjener"
#. i18n: ectx: whatsthis, entry (serverPortEnd), group (indi)
#. +> trunk5
#: kstars.kcfg:201
#, kde-format
msgid "INDI server will attempt to bind with ports ending with this port"
msgstr "INDI-tjeneren vil forsøke å binde til porter, slutter med denne porten"
#. i18n: ectx: label, entry (filterAlias), group (indi)
#. +> trunk5
#: kstars.kcfg:205
#, kde-format
msgid "Aliases for filter wheel slots."
msgstr "Aliaser for spaltene i filterhjulet."
#. i18n: ectx: whatsthis, entry (filterAlias), group (indi)
#. +> trunk5
#: kstars.kcfg:206
#, kde-format
msgid "List of the aliases for filter wheel slots."
msgstr "Liste over aliaser for spaltene i filterhjulet."
#. i18n: ectx: label, entry (indiServer), group (indi)
#. i18n: ectx: whatsthis, entry (indiServer), group (indi)
#. +> trunk5
#: kstars.kcfg:209 kstars.kcfg:210
#, kde-format
msgid "PATH to indiserver binary"
msgstr "Sti til indiserver-programmet"
#. i18n: ectx: label, entry (indiServerIsInternal), group (indi)
#. +> trunk5
#: kstars.kcfg:214
#, kde-format
msgid "Internal or External INDI Server?"
msgstr ""
#. i18n: ectx: label, entry (indiDriversDir), group (indi)
#. i18n: ectx: whatsthis, entry (indiDriversDir), group (indi)
#. +> trunk5
#: kstars.kcfg:218 kstars.kcfg:219
#, kde-format
msgid "PATH to indi drivers directory"
msgstr "Sti til mappe med indi-drivere"
#. i18n: ectx: label, entry (indiDriversAreInternal), group (indi)
#. i18n: ectx: label, entry (AstrometrySolverIsInternal), group (Align)
#. +> trunk5
#: kstars.kcfg:223 kstars.kcfg:1969
#, kde-format
msgid "Internal or External Astrometry Solver?"
msgstr ""
#. i18n: ectx: label, entry (streamWindowWidth), group (indi)
#. +> trunk5
#: kstars.kcfg:227
#, kde-format
msgid "Video streaming window width"
msgstr ""
#. i18n: ectx: label, entry (streamWindowHeight), group (indi)
#. +> trunk5
#: kstars.kcfg:231
#, kde-format
msgid "Video streaming window height"
msgstr ""
#. i18n: ectx: label, entry (INDIMountLogging), group (indi)
#. +> trunk5
#: kstars.kcfg:235
#, fuzzy, kde-format
msgid "Enable INDI Mount logging"
msgstr "Værstasjon"
#. i18n: ectx: label, entry (INDIFocuserLogging), group (indi)
#. +> trunk5
#: kstars.kcfg:239
#, fuzzy, kde-format
msgid "Enable INDI Focuser logging"
msgstr "Værstasjon"
#. i18n: ectx: label, entry (INDICCDLogging), group (indi)
#. +> trunk5
#: kstars.kcfg:243
#, fuzzy, kde-format
msgid "Enable INDI CCD logging"
msgstr "Værstasjon"
#. i18n: ectx: label, entry (INDIFilterWheelLogging), group (indi)
#. +> trunk5
#: kstars.kcfg:247
#, fuzzy, kde-format
msgid "Enable INDI Filter Wheel logging"
msgstr "Værstasjon"
#. i18n: ectx: label, entry (INDIDomeLogging), group (indi)
#. +> trunk5
#: kstars.kcfg:251
#, fuzzy, kde-format
msgid "Enable INDI Dome logging"
msgstr "Værstasjon"
#. i18n: ectx: label, entry (INDIDetectorLogging), group (indi)
#. +> trunk5
#: kstars.kcfg:255
#, fuzzy, kde-format
msgid "Enable INDI Detector logging"
msgstr "Værstasjon"
#. i18n: ectx: label, entry (INDIWeatherLogging), group (indi)
#. +> trunk5
#: kstars.kcfg:259
#, fuzzy, kde-format
msgid "Enable INDI Weather logging"
msgstr "Værstasjon"
#. i18n: ectx: label, entry (INDIAuxiliaryLogging), group (indi)
#. +> trunk5
#: kstars.kcfg:263
#, fuzzy, kde-format
msgid "Enable INDI Auxiliary logging"
msgstr "Værstasjon"
#. i18n: ectx: label, entry (INDIRotatorLogging), group (indi)
#. +> trunk5
#: kstars.kcfg:267
#, fuzzy, kde-format
msgid "Enable INDI Rotator logging"
msgstr "Værstasjon"
#. i18n: ectx: label, entry (INDIGPSLogging), group (indi)
#. +> trunk5
#: kstars.kcfg:271
#, fuzzy, kde-format
msgid "Enable INDI GPS logging"
msgstr "Værstasjon"
#. i18n: ectx: label, entry (INDIAOLogging), group (indi)
#. +> trunk5
#: kstars.kcfg:275
#, fuzzy, kde-format
msgid "Enable INDI Adaptive Optics logging"
msgstr "Værstasjon"
#. i18n: ectx: label, entry (CityName), group (Location)
#. +> trunk5
#: kstars.kcfg:282
#, kde-format
msgid "City name of geographic location."
msgstr "Stedsnavn på nytt geografisk sted."
#. i18n: ectx: whatsthis, entry (CityName), group (Location)
#. +> trunk5
#: kstars.kcfg:283
#, kde-format
msgid "The City name of the current geographic location."
msgstr "Stedsnavnet på gjeldende geografiske sted."
#. i18n: ectx: label, entry (ProvinceName), group (Location)
#. +> trunk5
#: kstars.kcfg:287
#, kde-format
msgid "Province name of geographic location."
msgstr "Provinsnavn for gjeldende geografiske sted."
#. i18n: ectx: whatsthis, entry (ProvinceName), group (Location)
#. +> trunk5
#: kstars.kcfg:288
#, fuzzy, kde-format
#| msgid "The Province name of the current geographic location. This is the name of the state for locations in the U. S."
msgid "The Province name of the current geographic location. This is the name of the state for locations in the U. S."
msgstr "Provinsnavnet for gjeldende geografiske sted. Dette er statsnavnet for steder i USA."
#. i18n: ectx: label, entry (CountryName), group (Location)
#. +> trunk5
#: kstars.kcfg:292
#, kde-format
msgid "Country name of geographic location."
msgstr "Landnavn for geografisk sted."
#. i18n: ectx: whatsthis, entry (CountryName), group (Location)
#. +> trunk5
#: kstars.kcfg:293
#, kde-format
msgid "The Country name of the current geographic location."
msgstr "Landsnavnet for gjeldende geografiske sted."
#. i18n: ectx: label, entry (Longitude), group (Location)
#. +> trunk5
#: kstars.kcfg:297
#, kde-format
msgid "Geographic Longitude, in degrees."
msgstr "Geografisk lengde, i grader."
#. i18n: ectx: whatsthis, entry (Longitude), group (Location)
#. +> trunk5
#: kstars.kcfg:298
#, kde-format
msgid "The longitude of the current geographic location, in decimal degrees."
msgstr "Lengden for gjeldende geografiske sted, i grader med desimaler."
#. i18n: ectx: label, entry (Latitude), group (Location)
#. +> trunk5
#: kstars.kcfg:302
#, kde-format
msgid "Geographic Latitude, in degrees."
msgstr "Geografisk bredde, i grader."
#. i18n: ectx: whatsthis, entry (Latitude), group (Location)
#. +> trunk5
#: kstars.kcfg:303
#, kde-format
msgid "The latitude of the current geographic location, in decimal degrees."
msgstr "Bredden for gjeldende geografiske sted, i grader med desimaler."
#. i18n: ectx: label, entry (Elevation), group (Location)
#. +> trunk5
#: kstars.kcfg:307
#, kde-format
msgid "Elevation above sea level of geographic location, in meters."
msgstr "Høyde over havet for gjeldende geografiske sted, i meter."
#. i18n: ectx: label, entry (TimeZone), group (Location)
#. +> trunk5
#: kstars.kcfg:311
#, kde-format
msgid "Time Zone offset of geographic location, in hours."
msgstr "Tidssoneforskyving for for gjeldende geografiske sted, i timer."
#. i18n: ectx: label, entry (DST), group (Location)
#. +> trunk5
#: kstars.kcfg:315
#, kde-format
msgid "Two-letter code for daylight savings time rule used by geographic location."
msgstr "Tobokstavs kode for sommertidsregelen som brukes på det geografiske stedet."
#. i18n: ectx: whatsthis, entry (DST), group (Location)
#. +> trunk5
#: kstars.kcfg:316
#, kde-format
msgid "Two-letter code that determines the dates on which daylight savings time begins and ends (you can view the rules by pressing the \"Explain DST Rules\" button in the Geographic Location window)."
msgstr "Tobokstavers kode som bestemmer datoene når sommertid begynner og slutter (du kan se reglene ved å trykke «Forklar ST-regler» i vinduet for geografisk sted)."
#. i18n: ectx: label, entry (UseAnimatedSlewing), group (View)
#. +> trunk5
#: kstars.kcfg:323
#, kde-format
msgid "Use animated slewing effects when changing focus position?"
msgstr "Bruke animerte dreieeffekter når fokusposisjon endres?"
#. i18n: ectx: whatsthis, entry (UseAnimatedSlewing), group (View)
#. +> trunk5
#: kstars.kcfg:324
#, fuzzy, kde-format
#| msgid "If true, focus changes will cause the sky to visibly spin to the new position. Otherwise, the display will \"snap\" instantly to the new position."
msgid "If true, focus changes will cause the sky to visibly spin to the new position. Otherwise, the display will \"snap\" instantly to the new position."
msgstr "Hvis dette er krysset av blir det vist en synlig bevegelse («dreiing») til den nye posisjonen. Hvis ikke, så «klikker bildet sentrert på den nye posisjonen med en gang."
#. i18n: ectx: label, entry (LeftClickSelectsObject), group (View)
#. +> trunk5
#: kstars.kcfg:328
#, kde-format
msgid "Select objects on left click?"
msgstr ""
#. i18n: ectx: whatsthis, entry (LeftClickSelectsObject), group (View)
#. +> trunk5
#: kstars.kcfg:329
#, kde-format
msgid "If true, clicking on the skymap will select the closest object and highlights it."
msgstr ""
#. i18n: ectx: label, entry (DefaultCursor), group (View)
#. +> trunk5
#: kstars.kcfg:333
#, kde-format
msgid "Select default Skymap cursor?"
msgstr ""
#. i18n: ectx: whatsthis, entry (DefaultCursor), group (View)
#. +> trunk5
#: kstars.kcfg:334
#, kde-format
msgid "Type of cursor when exploring the sky map."
msgstr ""
#. i18n: ectx: label, entry (FOVNames), group (View)
#. +> trunk5
#: kstars.kcfg:338
#, kde-format
msgid "Name of selected FOV indicators"
msgstr "Navn på valgte synsfeltindikatorer"
#. i18n: ectx: whatsthis, entry (FOVNames), group (View)
#. +> trunk5
#: kstars.kcfg:339
#, fuzzy, kde-format
#| msgid "The names of the currently selected field-of-view indicators. The list of defined FOV indicator names is listed in the \"Settings|FOV Symbols\" menu."
msgid "The names of the currently selected field-of-view indicators. The list of defined FOV indicator names is listed in the \"Settings|FOV Symbols\" menu."
msgstr "Navnene på de synsfeltindikatorene som er valgt nå. Lista over navn på definerte synsfeltindikatorer finnes i menyen «Innstillinger → FOV-symboler»."
#. i18n: ectx: label, entry (FadePlanetTrails), group (View)
#. +> trunk5
#: kstars.kcfg:343
#, kde-format
msgid "Fade planet trails to background color?"
msgstr "Skal planetspor fades til bakgrunnsfarge?"
#. i18n: ectx: whatsthis, entry (FadePlanetTrails), group (View)
#. +> trunk5
#: kstars.kcfg:344
#, kde-format
msgid "If true, trails attached to solar system bodies will fade into the background sky color."
msgstr "Hvis dette er krysset av vil sporene etter solsystemobjekter gradvis blendes over i himmelens bakgrunnsfarge."
#. i18n: ectx: label, entry (FocusRA), group (View)
#. +> trunk5
#: kstars.kcfg:348
#, kde-format
msgid "Right Ascension of focus position"
msgstr "Rektasensjon til fokusposisjon"
#. i18n: ectx: whatsthis, entry (FocusRA), group (View)
#. +> trunk5
#: kstars.kcfg:349
#, fuzzy, kde-format
#| msgid "The right ascension of the initial focus position of the sky map, in decimal hours. This value is volatile; it is reset whenever the program shuts down."
msgid "The right ascension of the initial focus position of the sky map, in decimal hours. This value is volatile; it is reset whenever the program shuts down."
msgstr "Rektasensjon for startpunkt for fokus på himmelkartet, i timer med desimaler. Denne verdien er flyktig og blir tilbakestilt hver gang programmet avslutter."
#. i18n: ectx: label, entry (FocusDec), group (View)
#. +> trunk5
#: kstars.kcfg:353
#, kde-format
msgid "Declination of focus position"
msgstr "Deklinasjon for fokuspunktet"
#. i18n: ectx: whatsthis, entry (FocusDec), group (View)
#. +> trunk5
#: kstars.kcfg:354
#, fuzzy, kde-format
#| msgid "The declination of the initial focus position of the sky map, in decimal degrees. This value is volatile; it is reset whenever the program shuts down."
msgid "The declination of the initial focus position of the sky map, in decimal degrees. This value is volatile; it is reset whenever the program shuts down."
msgstr "Deklinasjon for startpunkt for fokus på himmelkartet, i grader med desimaler. Denne verdien er flyktig og blir tilbakestilt hver gang programmet avslutter."
#. i18n: ectx: label, entry (FocusObject), group (View)
#. +> trunk5
#: kstars.kcfg:358
#, kde-format
msgid "Name of focused object"
msgstr "Navn på det fokuserte objektet"
#. i18n: ectx: whatsthis, entry (FocusObject), group (View)
#. +> trunk5
#: kstars.kcfg:359
#, fuzzy, kde-format
#| msgid "The name of the object that should be centered and tracked on startup. If no object should be centered, set to \"nothing\". This value is volatile; it is reset whenever the program shuts down."
msgid "The name of the object that should be centered and tracked on startup. If no object should be centered, set to \"nothing\". This value is volatile; it is reset whenever the program shuts down."
msgstr "Navnet på objektet som skal sentreres og følges ved oppstart. Hvis ikke noe objekt skal sentreres, oppgi «ingenting». denne verdien er flyktig og blit tilbakestilt hver gang programmet avslutter."
#. i18n: ectx: label, entry (IsTracking), group (View)
#. +> trunk5
#: kstars.kcfg:363
#, kde-format
msgid "Is tracking engaged?"
msgstr "Er sporing slått på?"
#. i18n: ectx: whatsthis, entry (IsTracking), group (View)
#. +> trunk5
#: kstars.kcfg:364
#, fuzzy, kde-format
#| msgid "True if the skymap should track on its initial position on startup. This value is volatile; it is reset whenever the program shuts down."
msgid "True if the skymap should track on its initial position on startup. This value is volatile; it is reset whenever the program shuts down."
msgstr "Sant hvis himmelkartet skal spore sin startposisjon ved oppstart. Denne verdien er flyktig og blir tilbakestilt hver gang programmet avslutter."
#. i18n: ectx: label, entry (HideOnSlew), group (View)
#. +> trunk5
#: kstars.kcfg:368
#, kde-format
msgid "Hide objects while moving?"
msgstr "Skjule objekter ved flytting?"
#. i18n: ectx: whatsthis, entry (HideOnSlew), group (View)
#. +> trunk5
#: kstars.kcfg:369
#, kde-format
msgid "Toggle whether KStars should hide some objects while the display is moving, for smoother motion."
msgstr "Bestem om KStars skal skjule noen objekter mens kartet beveger seg, slik at bevegelsen blir jevnere."
#. i18n: ectx: label, entry (HideCBounds), group (View)
#. +> trunk5
#: kstars.kcfg:373
#, kde-format
msgid "Hide constellation boundaries while moving?"
msgstr "Skjul stjernebildegrenser under flytting?"
#. i18n: ectx: whatsthis, entry (HideCBounds), group (View)
#. +> trunk5
#: kstars.kcfg:374
#, kde-format
msgid "Toggle whether constellation boundaries are hidden while the display is in motion."
msgstr "Hvis du velger dette, så skjules stjernebildegrenser mens kartet er i bevegelse."
#. i18n: ectx: label, entry (HideCLines), group (View)
msgid "Draw grids according to active coordinate system?"
msgstr "Skal rutenett tegnes for det aktive koordinatsystemet?"
#. i18n: ectx: whatsthis, entry (AutoSelectGrid), group (View)
#. +> trunk5
#: kstars.kcfg:533
#, kde-format
msgid "Coordinate grids will automatically change according to active coordinate system."
msgstr "Koordinatnett endres automatisk i følge det aktive koordinatsystemet."
#. i18n: ectx: label, entry (ShowEquatorialGrid), group (View)
#. +> trunk5
#: kstars.kcfg:537
#, kde-format
msgid "Draw equatorial coordinate grid in the sky map?"
msgstr "Skal ekvatorial-koordinatnett tegnes på himmelkartet?"
#. i18n: ectx: whatsthis, entry (ShowEquatorialGrid), group (View)
#. +> trunk5
#: kstars.kcfg:538
#, kde-format
msgid "Toggle whether the equatorial coordinate grid is drawn in the sky map."
msgstr "Bestem om rutenett for ekvatorialkoordinater skal tegnes på himmelkartet."
#. i18n: ectx: label, entry (ShowHorizontalGrid), group (View)
#. +> trunk5
#: kstars.kcfg:542
#, kde-format
msgid "Draw horizontal coordinate grid in the sky map?"
msgstr "Skal horisont-koordinatnett tegnes på himmelkartet?"
#. i18n: ectx: whatsthis, entry (ShowHorizontalGrid), group (View)
#. +> trunk5
#: kstars.kcfg:543
#, kde-format
msgid "Toggle whether the horizontal coordinate grid is drawn in the sky map."
msgstr "Bestem om rutenett for horisontalkoordinater skal tegnes på himmelkartet."
#. i18n: ectx: label, entry (ShowLocalMeridian), group (View)
#. +> trunk5
#: kstars.kcfg:547
#, fuzzy, kde-format
#| msgid "Draw horizon line in the sky map?"
msgid "Draw local meridian line in the sky map?"
msgstr "Tegne horisontlinje på himmelkartet?"
#. i18n: ectx: whatsthis, entry (ShowLocalMeridian), group (View)
#. +> trunk5
#: kstars.kcfg:548
#, fuzzy, kde-format
#| msgid "Toggle whether the horizon line is drawn in the sky map."
msgid "Toggle whether the local meridian line is drawn in the sky map."
msgstr "Bestem om horisontlinja skal tegnes på himmelkartet."
#. i18n: ectx: label, entry (ShowGround), group (View)
#. +> trunk5
#: kstars.kcfg:552
#, kde-format
msgid "Draw opaque ground in the sky map?"
msgstr "Tegn ugjennomsiktig jord på himmelkartet?"
#. i18n: ectx: whatsthis, entry (ShowGround), group (View)
#. +> trunk5
#: kstars.kcfg:553
#, kde-format
msgid "Toggle whether the region below the horizon is opaque."
msgstr "Bestem om området under horisonten skal være ugjennomsiktig."
#. i18n: ectx: label, entry (ShowHorizon), group (View)
#. +> trunk5
#: kstars.kcfg:557
#, kde-format
msgid "Draw horizon line in the sky map?"
msgstr "Tegne horisontlinje på himmelkartet?"
#. i18n: ectx: whatsthis, entry (ShowHorizon), group (View)
#. +> trunk5
#: kstars.kcfg:558
#, kde-format
msgid "Toggle whether the horizon line is drawn in the sky map."
msgstr "Bestem om horisontlinja skal tegnes på himmelkartet."
#. i18n: ectx: label, entry (ShowFlags), group (View)
#. +> trunk5
#: kstars.kcfg:562
#, kde-format
msgid "Draw flags in the sky map?"
msgstr "Tegne flagg på himmelkartet?"
#. i18n: ectx: whatsthis, entry (ShowFlags), group (View)
#. +> trunk5
#: kstars.kcfg:563
#, kde-format
msgid "Toggle whether flags are drawn in the sky map."
msgstr "Bestem om flagg blir tegnet på himmelkartet."
#. i18n: ectx: label, entry (ShowIC), group (View)
#. +> trunk5
#: kstars.kcfg:567
#, kde-format
msgid "Draw IC objects in the sky map?"
msgstr "Tegne IC-objekter på himmelkartet?"
#. i18n: ectx: whatsthis, entry (ShowIC), group (View)
#. +> trunk5
#: kstars.kcfg:568
#, kde-format
msgid "Toggle whether IC objects are drawn in the sky map."
msgstr "Bestem om IC-objekter skal tegnes på himmelkartet."
#. i18n: ectx: label, entry (ShowNGC), group (View)
#. +> trunk5
#: kstars.kcfg:572
#, kde-format
msgid "Draw NGC objects in the sky map?"
msgstr "Tegne NGC-objekter på himmelkartet?"
#. i18n: ectx: whatsthis, entry (ShowNGC), group (View)
#. +> trunk5
#: kstars.kcfg:573
#, kde-format
msgid "Toggle whether NGC objects are drawn in the sky map."
msgstr "Bestem om NGC-objekter skal tegnes på himmelkartet."
#. i18n: ectx: label, entry (ShowMessier), group (View)
#. +> trunk5
#: kstars.kcfg:577
#, kde-format
msgid "Draw Messier objects in the sky map?"
msgstr "Tegne Messier-objekter på himmelkartet?"
#. i18n: ectx: whatsthis, entry (ShowMessier), group (View)
#. +> trunk5
#: kstars.kcfg:578
#, kde-format
msgid "Toggle whether Messier objects are drawn in the sky map."
msgstr "Bestem om NGC-objekter skal tegnes på himmelkartet."
#. i18n: ectx: label, entry (ShowMessierImages), group (View)
#. +> trunk5
#: kstars.kcfg:582
#, kde-format
msgid "Draw Messier object images in the sky map?"
msgstr "Tegne Messier-objekter som bilder på himmelkartet?"
#. i18n: ectx: whatsthis, entry (ShowMessierImages), group (View)
#. +> trunk5
#: kstars.kcfg:583
#, kde-format
msgid "Toggle whether Messier objects are rendered as images in the sky map."
msgstr "Bestem om Messier-objekter skal tegnes som bilder på himmelkartet."
#. i18n: ectx: label, entry (ShowOther), group (View)
#. +> trunk5
#: kstars.kcfg:587
#, kde-format
msgid "Draw extra deep-sky objects in the sky map?"
msgstr "Tegne ekstra fjerne objekter på himmelkartet?"
#. i18n: ectx: whatsthis, entry (ShowOther), group (View)
#. +> trunk5
#: kstars.kcfg:588
#, kde-format
msgid "Toggle whether extra objects are drawn in the sky map."
msgstr "Bestem om ekstra objekter skal tegnes i himmelkartet eller ikke."
#. i18n: ectx: label, entry (ShowMilkyWay), group (View)
#. +> trunk5
#: kstars.kcfg:592
#, kde-format
msgid "Draw Milky Way contour in the sky map?"
msgstr "Tegne konturen av Melkeveien på himmelkartet?"
#. i18n: ectx: whatsthis, entry (ShowMilkyWay), group (View)
#. +> trunk5
#: kstars.kcfg:593
#, kde-format
msgid "Toggle whether the Milky Way contour is drawn in the sky map."
msgstr "Bestem om Melkevei-konturen skal tegnes på himmelkartet."
#. i18n: ectx: label, entry (FillMilkyWay), group (View)
#. +> trunk5
#: kstars.kcfg:597
#, kde-format
msgid "Fill Milky Way contour? (false means use outline only)"
msgstr "Skal Melkevei-konturen fylles? (nei betyr bruk bare konturen)"
#. i18n: ectx: whatsthis, entry (FillMilkyWay), group (View)
#. +> trunk5
#: kstars.kcfg:598
#, fuzzy, kde-format
#| msgid "Toggle whether the Milky Way contour is filled. When this option is false, the Milky Way is shown as an outline."
msgid "Toggle whether the Milky Way contour is filled. When this option is false, the Milky Way is shown as an outline."
msgstr "Bestem om Melkeveikonturen skal fylles. Hvis ikke, så blir bare konturen vist."
#. i18n: ectx: label, entry (ShowSolarSystem), group (View)
#. +> trunk5
#: kstars.kcfg:602
#, kde-format
msgid "Meta-option for all planets in the sky map."
msgstr "Meta-valg for alle planeter på himmelkartet."
#. i18n: ectx: whatsthis, entry (ShowSolarSystem), group (View)
#. +> trunk5
#: kstars.kcfg:603
#, kde-format
msgid "Meta-option to control whether all major planets (and the Sun and Moon) are drawn in the sky map."
msgstr "Overordnet valg som bestemmer om alle de større planetene (og Solen og Månen) tegnespå himmelkartet."
#. i18n: ectx: label, entry (ShowPlanetImages), group (View)
#. +> trunk5
#: kstars.kcfg:607
#, kde-format
msgid "Draw planets as images in the sky map?"
msgstr "Tegne planetene som bilder på himmelkartet?"
#. i18n: ectx: whatsthis, entry (ShowPlanetImages), group (View)
#. +> trunk5
#: kstars.kcfg:608
#, kde-format
msgid "Toggle whether major planets (and the Sun and Moon) are rendered as images in the sky map."
msgstr "Bestem om de store planetene (og Solen og Månen) skal tegnes som bilder på himmelkartet."
#. i18n: ectx: label, entry (ShowPlanetNames), group (View)
#. +> trunk5
#: kstars.kcfg:612
#, kde-format
msgid "Label planet names in the sky map?"
msgstr "Skal planetnavnene vises på himmelkartet?"
#. i18n: ectx: whatsthis, entry (ShowPlanetNames), group (View)
#. +> trunk5
#: kstars.kcfg:613
#, kde-format
msgid "Toggle whether major planets (and the Sun and Moon) are labeled in the sky map."
msgstr "Bestem om de store planetene og (Solen og Månen) får sine navn på himmelkartet."
#. i18n: ectx: label, entry (ShowSun), group (View)
#. +> trunk5
#: kstars.kcfg:617
#, kde-format
msgid "Draw Sun in the sky map?"
msgstr "Tegne Solen på himmelkartet?"
#. i18n: ectx: whatsthis, entry (ShowSun), group (View)
#. +> trunk5
#: kstars.kcfg:618
#, kde-format
msgid "Toggle whether the Sun is drawn in the sky map."
msgstr "Bestem om Solen blir tegnet på himmelkartet."
#. i18n: ectx: label, entry (ShowMoon), group (View)
#. +> trunk5
#: kstars.kcfg:622
#, kde-format
msgid "Draw Moon in the sky map?"
msgstr "Tegne Månen på himmelkartet?"
#. i18n: ectx: whatsthis, entry (ShowMoon), group (View)
#. +> trunk5
#: kstars.kcfg:623
#, kde-format
msgid "Toggle whether the Moon is drawn in the sky map."
msgstr "Bestem om Månen blir tegnet på himmelkartet."
#. i18n: ectx: label, entry (ShowMercury), group (View)
#. +> trunk5
#: kstars.kcfg:627
#, kde-format
msgid "Draw Mercury in the sky map?"
msgstr "Tegne Merkur på himmelkartet?"
#. i18n: ectx: whatsthis, entry (ShowMercury), group (View)
#. +> trunk5
#: kstars.kcfg:628
#, kde-format
msgid "Toggle whether Mercury is drawn in the sky map."
msgstr "Bestem om Merkur blir tegnet på himmelkartet."
#. i18n: ectx: label, entry (ShowVenus), group (View)
#. +> trunk5
#: kstars.kcfg:632
#, kde-format
msgid "Draw Venus in the sky map?"
msgstr "Tegne Venus på himmelkartet?"
#. i18n: ectx: whatsthis, entry (ShowVenus), group (View)
#. +> trunk5
#: kstars.kcfg:633
#, kde-format
msgid "Toggle whether Venus is drawn in the sky map."
msgstr "Bestem om Venus blir tegnet på himmelkartet."
#. i18n: ectx: label, entry (ShowMars), group (View)
#. +> trunk5
#: kstars.kcfg:637
#, kde-format
msgid "Draw Mars in the sky map?"
msgstr "Tegne Mars på himmelkartet?"
#. i18n: ectx: whatsthis, entry (ShowMars), group (View)
#. +> trunk5
#: kstars.kcfg:638
#, kde-format
msgid "Toggle whether Mars is drawn in the sky map."
msgstr "Bestem om Mars blir tegnet på himmelkartet."
#. i18n: ectx: label, entry (ShowJupiter), group (View)
#. +> trunk5
#: kstars.kcfg:642
#, kde-format
msgid "Draw Jupiter in the sky map?"
msgstr "Tegne Jupiter på himmelkartet?"
#. i18n: ectx: whatsthis, entry (ShowJupiter), group (View)
#. +> trunk5
#: kstars.kcfg:643
#, kde-format
msgid "Toggle whether Jupiter is drawn in the sky map."
msgstr "Bestem om Jupiter blir tegnet på himmelkartet."
#. i18n: ectx: label, entry (ShowSaturn), group (View)
#. +> trunk5
#: kstars.kcfg:647
#, kde-format
msgid "Draw Saturn in the sky map?"
msgstr "Tegne Saturn på himmelkartet?"
#. i18n: ectx: whatsthis, entry (ShowSaturn), group (View)
#. +> trunk5
#: kstars.kcfg:648
#, kde-format
msgid "Toggle whether Saturn is drawn in the sky map."
msgstr "Bestem om Saturn blir tegnet på himmelkartet."
#. i18n: ectx: label, entry (ShowUranus), group (View)
#. +> trunk5
#: kstars.kcfg:652
#, kde-format
msgid "Draw Uranus in the sky map?"
msgstr "Tegne Uranus på himmelkartet?"
#. i18n: ectx: whatsthis, entry (ShowUranus), group (View)
#. +> trunk5
#: kstars.kcfg:653
#, kde-format
msgid "Toggle whether Uranus is drawn in the sky map."
msgstr "Bestem om Uranus blir tegnet på himmelkartet."
#. i18n: ectx: label, entry (ShowNeptune), group (View)
#. +> trunk5
#: kstars.kcfg:657
#, kde-format
msgid "Draw Neptune in the sky map?"
msgstr "Tegne Neptun på himmelkartet?"
#. i18n: ectx: whatsthis, entry (ShowNeptune), group (View)
#. +> trunk5
#: kstars.kcfg:658
#, kde-format
msgid "Toggle whether Neptune is drawn in the sky map."
msgstr "Bestem om Neptun blir tegnet på himmelkartet."
#. i18n: ectx: label, entry (ShowPluto), group (View)
#. +> trunk5
#: kstars.kcfg:662
#, kde-format
msgid "Draw Pluto in the sky map?"
msgstr "Tegne Pluto på himmelkartet?"
#. i18n: ectx: whatsthis, entry (ShowPluto), group (View)
#. +> trunk5
#: kstars.kcfg:663
#, kde-format
msgid "Toggle whether Pluto is drawn in the sky map."
msgstr "Bestem om Pluto blir tegnet på kartet."
#. i18n: ectx: label, entry (ShowStars), group (View)
#. +> trunk5
#: kstars.kcfg:667
#, kde-format
msgid "Draw stars in the sky map?"
msgstr "Tegne stjerner på himmelkartet?"
#. i18n: ectx: whatsthis, entry (ShowStars), group (View)
#. +> trunk5
#: kstars.kcfg:668
#, kde-format
msgid "Toggle whether stars are drawn in the sky map."
msgstr "Betem om stjerner blir tegnet på himmelkartet."
#. i18n: ectx: label, entry (ShowStarMagnitudes), group (View)
#. +> trunk5
#: kstars.kcfg:672
#, kde-format
msgid "Label star magnitudes in the sky map?"
msgstr "Vise stjernenes størrelsesklasser på himmelkartet?"
#. i18n: ectx: whatsthis, entry (ShowStarMagnitudes), group (View)
#. +> trunk5
#: kstars.kcfg:673
#, kde-format
msgid "Toggle whether star magnitude (brightness) labels are shown in the sky map."
msgstr "Bestem om størrelsesklasser skal vises som merkelapper på stjernene påhimmelkartet."
#. i18n: ectx: label, entry (ShowStarNames), group (View)
#. +> trunk5
#: kstars.kcfg:677
#, kde-format
msgid "Label star names in the sky map?"
msgstr "Skal stjernenes navn vises på himmelkartet?"
#. i18n: ectx: whatsthis, entry (ShowStarNames), group (View)
#. +> trunk5
#: kstars.kcfg:678
#, kde-format
msgid "Toggle whether star name labels are shown in the sky map."
msgstr "Bestem om stjernenavn blir tegnet på himmelkartet."
#. i18n: ectx: label, entry (ShowDeepSkyMagnitudes), group (View)
#. +> trunk5
#: kstars.kcfg:682
#, kde-format
msgid "Label deep-sky object magnitudes in the sky map?"
msgstr "Vise fjerne objekters størrelsesklasser på himmelkartet?"
#. i18n: ectx: whatsthis, entry (ShowDeepSkyMagnitudes), group (View)
#. +> trunk5
#: kstars.kcfg:683
#, kde-format
msgid "Toggle whether deep-sky object magnitude (brightness) labels are shown in the sky map."
msgstr "Bestem om størrelsesklasser skal vises som merkelapper på fjerne objekterpå himmelkartet."
#. i18n: ectx: label, entry (ShowDeepSkyNames), group (View)
#. +> trunk5
#: kstars.kcfg:687
#, kde-format
msgid "Label deep-sky objects in the sky map?"
msgstr "Skal det settes merkelapper på fjerne objekter på himmelkartet?"
#. i18n: ectx: whatsthis, entry (ShowDeepSkyNames), group (View)
#. +> trunk5
#: kstars.kcfg:688
#, kde-format
msgid "Toggle whether deep-sky object name labels are shown in the sky map."
msgstr "Bestem om navn på fjerne objekter blir tegnet på himmelkartet."
#. i18n: ectx: label, entry (SlewTimeScale), group (View)
#. +> trunk5
#: kstars.kcfg:692
#, kde-format
msgid "Minimum timescale for forced-slewing mode"
msgstr "Minimum tidsskala for tvunget hurtigbevegelse"
#. i18n: ectx: whatsthis, entry (SlewTimeScale), group (View)
#. +> trunk5
#: kstars.kcfg:693
#, kde-format
msgid "The timescale above which slewing mode is forced on at all times."
msgstr "Over denne tidsskalaen blir hurtig bevegelse alltid brukt."
#. i18n: ectx: label, entry (BoxBGMode), group (View)
#. +> trunk5
#: kstars.kcfg:697
#, kde-format
msgid "InfoBoxes Background fill mode"
msgstr "Hvordan infoboksers bakgrunn fylles"
#. i18n: ectx: whatsthis, entry (BoxBGMode), group (View)
#. +> trunk5
#: kstars.kcfg:698
#, kde-format
msgid "The background fill mode for the on-screen information boxes: 0=\"no BG\"; 1=\"semi-transparent BG\"; 2=\"opaque BG\""
msgstr "Bakgrunnsfylling for informasjonsbokser på skjermen: 0 = «ingen bakgrunn», 1=«halvgjennomsiktig BG«, 2=«tett BG» "
#. i18n: ectx: label, entry (Projection), group (View)
#. +> trunk5
#: kstars.kcfg:702
#, kde-format
msgid "Mapping projection algorithm"
msgstr "Kartprojeksjonsalgoritme"
#. i18n: ectx: whatsthis, entry (Projection), group (View)
#. +> trunk5
#: kstars.kcfg:703
#, kde-format
msgid "Algorithm for the mapping projection."
msgstr "Algoritme for kartprojeksjonen."
#. i18n: ectx: label, entry (UseAbbrevConstellNames), group (View)
#. +> trunk5
#: kstars.kcfg:707
#, kde-format
msgid "Use abbreviated constellation names?"
msgstr "Bruke forkortede stjernebildenavn?"
#. i18n: ectx: whatsthis, entry (UseAbbrevConstellNames), group (View)
#. +> trunk5
#: kstars.kcfg:708
#, kde-format
msgid "Use official IAU abbreviations for constellation names."
msgstr "Bruk offisielle IAU-forkortelser for stjernebildenavn."
#. i18n: ectx: label, entry (UseLatinConstellNames), group (View)
#. +> trunk5
#: kstars.kcfg:712
#, kde-format
msgid "Use Latin constellation names?"
msgstr "Bruke latinske stjernebildenavn?"
#. i18n: ectx: whatsthis, entry (UseLatinConstellNames), group (View)
#. +> trunk5
#: kstars.kcfg:713
#, kde-format
msgid "Use Latin constellation names."
msgstr "Bruk latinske stjernebildenavn."
#. i18n: ectx: label, entry (UseLocalConstellNames), group (View)
#. +> trunk5
#: kstars.kcfg:717
#, kde-format
msgid "Use localized constellation names?"
msgstr "Bruke lokaliserte stjernebildenavn?"
#. i18n: ectx: whatsthis, entry (UseLocalConstellNames), group (View)
#. +> trunk5
#: kstars.kcfg:718
#, kde-format
msgid "Use localized constellation names (if localized names are not available, default to Latin names)."
msgstr "Bruk lokaliserte (norske) stjernebildenavn (hvis lokaliserte navn ikke finnes, så bruk latinske navn)."
#. i18n: ectx: label, entry (UseAltAz), group (View)
#. +> trunk5
#: kstars.kcfg:722
#, kde-format
msgid "Use horizontal coordinate system?"
msgstr "Skal horisont-koordinater brukes?"
#. i18n: ectx: whatsthis, entry (UseAltAz), group (View)
#. +> trunk5
#: kstars.kcfg:723
#, kde-format
msgid "Display the sky with horizontal coordinates (when false, equatorial coordinates will be used)."
msgstr "Vis himmelen med horisontkoordinater (ellers brukes ekvatorialkoordinater)."
#. i18n: ectx: label, entry (UseAutoLabel), group (View)
#. +> trunk5
#: kstars.kcfg:727
#, kde-format
msgid "Automatically label focused object?"
msgstr "Sett automatisk merkelapp på senterobjektet?"
#. i18n: ectx: whatsthis, entry (UseAutoLabel), group (View)
#. +> trunk5
#: kstars.kcfg:728
#, kde-format
msgid "Toggle whether a centered object automatically gets a name label attached."
msgstr "Bestem om et sentrert objekt automatisk skal få en navnemerkelapp."
#. i18n: ectx: label, entry (UseAutoTrail), group (View)
#. +> trunk5
#: kstars.kcfg:732 tools/scriptbuilder.cpp:696
#, kde-format
msgid "Automatically add trail to centered solar system body?"
msgstr "Legg automatisk spor til sentrert solsystem-objekt?"
#. i18n: ectx: whatsthis, entry (UseAutoTrail), group (View)
#. +> trunk5
#: kstars.kcfg:733
#, kde-format
msgid "Toggle whether a centered solar system object automatically gets a trail attached, as long as it remains centered."
msgstr "Bestem om et sentrert solsystemobjekt automatisk skal få tilknyttet et spor, så lenge det forblir sentrert."
#. i18n: ectx: label, entry (UseHoverLabel), group (View)
#. +> trunk5
#: kstars.kcfg:737
#, kde-format
msgid "Add temporary label on mouse hover?"
msgstr "Sette på midlertidig navnelapp under musepekeren når den står stille?"
#. i18n: ectx: whatsthis, entry (UseHoverLabel), group (View)
#. +> trunk5
#: kstars.kcfg:738
#, kde-format
msgid "Toggle whether the object under the mouse cursor gets a transient name label."
msgstr "Bestem om objektet under musepekeren skal få en midlertidig navneetikett."
#. i18n: ectx: label, entry (UseRefraction), group (View)
#. +> trunk5
#: kstars.kcfg:742
#, kde-format
msgid "Correct positions for atmospheric refraction?"
msgstr "Korriger posisjoner for atmosfærisk brytning?"
#. i18n: ectx: whatsthis, entry (UseRefraction), group (View)
#. +> trunk5
#: kstars.kcfg:743
#, kde-format
msgid "Toggle whether object positions are corrected for the effects of atmospheric refraction (only applies when horizontal coordinates are used)."
msgstr "Bestem om objektposisjoner skal korrigeres for virkningen av brytning i atmosfæren (gjelder bare når horisontkoordinater brukes)."
#. i18n: ectx: label, entry (UseRelativistic), group (View)
#. +> trunk5
#: kstars.kcfg:747
#, kde-format
msgid "Apply relativistic corrections due to the bending of light in sun's gravitational field"
msgstr "Bruk relativistiske korreksjoner på grunn av lysets avbøying i Solens gravitasjonsfelt"
#. i18n: ectx: whatsthis, entry (UseRelativistic), group (View)
#. +> trunk5
#: kstars.kcfg:748
#, kde-format
msgid "Toggle whether corrections due to bending of light around the sun are taken into account"
msgstr "Slå av/på om det skal korrigeres for lysavbøying nær Solen"
#. i18n: ectx: label, entry (UseAntialias), group (View)
#. +> trunk5
#: kstars.kcfg:752
#, kde-format
msgid "Use antialiasing when drawing the screen?"
msgstr "Bruke kantutjevning når skjermen tegnes opp?"
#. i18n: ectx: whatsthis, entry (UseAntialias), group (View)
#. +> trunk5
#: kstars.kcfg:753
#, fuzzy, kde-format
#| msgid "Toggle whether the sky is rendered using antialiasing. Lines and shapes are smoother with antialiasing, but rendering the screen will take more time."
msgid "Toggle whether the sky is rendered using antialiasing. Lines and shapes are smoother with antialiasing, but rendering the screen will take more time."
msgstr "Bestem om himmelen skal tegnes med kantutjevning. Linjer og former blir jevnere med kantutjevning, men det vil ta lenger tid å tegne opp skjermen."
#. i18n: ectx: label, entry (ZoomFactor), group (View)
#. +> trunk5
#: kstars.kcfg:757
#, kde-format
msgid "Zoom Factor, in pixels per radian"
msgstr "Forstørringsfaktor, i piksler pr. radian"
#. i18n: ectx: whatsthis, entry (ZoomFactor), group (View)
#. +> trunk5
#: kstars.kcfg:758
#, kde-format
msgid "The zoom level, measured in pixels per radian."
msgstr "Forstørringsnivået, målt i piksler per radian."
#. i18n: ectx: label, entry (ZoomScrollFactor), group (View)
#. +> trunk5
#: kstars.kcfg:764
#, kde-format
msgid "Zoom scroll sensitivity."
msgstr ""
#. i18n: ectx: whatsthis, entry (ZoomScrollFactor), group (View)
#. +> trunk5
#: kstars.kcfg:765
#, kde-format
msgid "When zooming in or out, change zoom speed factor by this multiplier."
msgstr ""
#. i18n: ectx: label, entry (MagLimitAsteroid), group (View)
#. +> trunk5
#: kstars.kcfg:771
#, kde-format
msgid "Faint limit for asteroids"
msgstr "Nedre størrelsesgrense for asteroider"
#. i18n: ectx: whatsthis, entry (MagLimitAsteroid), group (View)
#. +> trunk5
#: kstars.kcfg:772
#, kde-format
msgid "The faint magnitude limit for drawing asteroids."
msgstr "Angi svakeste lysstyrke for å tegne asteroider."
#. i18n: ectx: label, entry (MagLimitAsteroidDownload), group (View)
#. +> trunk5
#: kstars.kcfg:776
#, kde-format
msgid "Maximum magnitude for asteroids to be downloaded from JPL."
msgstr ""
#. i18n: ectx: whatsthis, entry (MagLimitAsteroidDownload), group (View)
#. +> trunk5
#: kstars.kcfg:777
#, kde-format
msgid "The maximum magnitude (visibility) to filter the asteroid data download from JPL."
msgstr ""
#. i18n: ectx: label, entry (AsteroidLabelDensity), group (View)
#. +> trunk5
#: kstars.kcfg:781
#, kde-format
msgid "Label density for asteroid names"
msgstr "Merkelapptetthet for navn på asteroider"
#. i18n: ectx: whatsthis, entry (AsteroidLabelDensity), group (View)
#. +> trunk5
#: kstars.kcfg:782
#, kde-format
msgid "Controls the relative number of asteroid name labels drawn in the map."
msgstr "Styrer det relative antall merkelapper for asteroidenavn som tegnes på kartet."
#. i18n: ectx: label, entry (MagLimitDrawDeepSky), group (View)
#. +> trunk5
#: kstars.kcfg:786
#, kde-format
msgid "Faint limit for deep-sky objects"
msgstr "Nedre størrelsesgrense for fjerne himmelobjekter"
#. i18n: ectx: whatsthis, entry (MagLimitDrawDeepSky), group (View)
#. +> trunk5
#: kstars.kcfg:787
#, kde-format
msgid "The faint magnitude limit for drawing deep-sky objects, when fully zoomed in."
msgstr "Nedre lysstyrkegrense for å tegne fjerne himmelobjekter ved full forstørrelse."
#. i18n: ectx: label, entry (MagLimitDrawDeepSkyZoomOut), group (View)
#. +> trunk5
#: kstars.kcfg:791
#, kde-format
msgid "Faint limit for deep-sky objects when zoomed out"
msgstr "Nedre størrelsesgrense for fjerne himmelobjekter når zoomet helt ut"
#. i18n: ectx: whatsthis, entry (MagLimitDrawDeepSkyZoomOut), group (View)
#. +> trunk5
#: kstars.kcfg:792
#, kde-format
msgid "The faint magnitude limit for drawing deep-sky objects, when fully zoomed out."
msgstr "Nedre lysstyrkegrense for å tegne fjerne himmelobjekter når forstørrelsen er minst mulig."
#. i18n: ectx: label, entry (ShowUnknownMagObjects), group (View)
#. +> trunk5
#: kstars.kcfg:796
#, kde-format
msgid "Show deep-sky objects of unknown magnitude"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowUnknownMagObjects), group (View)
#. +> trunk5
#: kstars.kcfg:797
#, kde-format
msgid "When enabled, objects whose magnitudes are unknown, or not available to KStars, are drawn irrespective of the faint limits set."
msgstr ""
#. i18n: ectx: label, entry (MagLimitDrawStar), group (View)
#. +> trunk5
#: kstars.kcfg:802
#, kde-format
msgid "Faint limit for stars"
msgstr "Størrelsesgrense for stjerner"
#. i18n: ectx: whatsthis, entry (MagLimitDrawStar), group (View)
#. +> trunk5
#: kstars.kcfg:803
#, kde-format
msgid "The faint magnitude limit for drawing stars, when fully zoomed in."
msgstr "Angi svakeste lysstyrke for å tegne stjerner, ved full forstørrelse."
#. i18n: ectx: label, entry (StarDensity), group (View)
#. +> trunk5
#: kstars.kcfg:807
#, kde-format
msgid "Density of stars in the field of view"
msgstr "Stjernetetthet i synsfeltet"
#. i18n: ectx: whatsthis, entry (StarDensity), group (View)
#. +> trunk5
#: kstars.kcfg:808
#, kde-format
msgid "Sets the density of stars in the field of view"
msgstr "Angir tettheten av stjerner i synsfeltet"
#. i18n: ectx: label, entry (MagLimitDrawStarZoomOut), group (View)
#. +> trunk5
#: kstars.kcfg:813
#, kde-format
msgid "Faint limit for stars when zoomed out"
msgstr "Nedre størrelsesgrense for stjerner ved minste forstørrelse"
#. i18n: ectx: whatsthis, entry (MagLimitDrawStarZoomOut), group (View)
#. +> trunk5
#: kstars.kcfg:814
#, kde-format
msgid "The faint magnitude limit for drawing stars, when fully zoomed out."
msgstr "Nedre lysstyrkegrense for å tegne stjerner ved minste forstørrelse."
#. i18n: ectx: label, entry (MagLimitHideStar), group (View)
#. +> trunk5
#: kstars.kcfg:819
#, kde-format
msgid "Faint limit for stars when slewing"
msgstr "Nedre størrelsesgrense for stjerner under rask dreiing"
#. i18n: ectx: whatsthis, entry (MagLimitHideStar), group (View)
#. +> trunk5
#: kstars.kcfg:820
#, kde-format
msgid "The faint magnitude limit for drawing stars, when the map is in motion (only applicable if faint stars are set to be hidden while the map is in motion)."
msgstr "Nedre lysstyrkegrense for å tegne stjerner når kartet er i rask bevegelse (brukes bare hvis svake stjerner skal skjules når kartet beveger seg)."
#. i18n: ectx: label, entry (StarLabelDensity), group (View)
#. +> trunk5
#: kstars.kcfg:824
#, kde-format
msgid "Relative density for star name labels and/or magnitudes"
msgstr "Relativ tetthet for å tegne navn og/eller størrrelsesklasser på stjerner"
#. i18n: ectx: whatsthis, entry (StarLabelDensity), group (View)
#. +> trunk5
#: kstars.kcfg:825
#, kde-format
msgid "The relative density for drawing star name and magnitude labels."
msgstr "Den relative tettheten for å tegne navn og/eller størrelsesklasser på stjerner."
#. i18n: ectx: label, entry (DeepSkyLabelDensity), group (View)
#. +> trunk5
#: kstars.kcfg:829
#, kde-format
msgid "Relative density for deep-sky object name labels and/or magnitudes"
msgstr "Relativ tetthet for å tegne navn og/eller størrrelsesklasser på fjerne objekter"
#. i18n: ectx: whatsthis, entry (DeepSkyLabelDensity), group (View)
#. +> trunk5
#: kstars.kcfg:830
#, kde-format
msgid "The relative density for drawing deep-sky object name and magnitude labels."
msgstr "Den relative tettheten for å tegne navn og/eller størrelsesklasser på fjerne objekter."
#. i18n: ectx: label, entry (DeepSkyLongLabels), group (View)
#. +> trunk5
#: kstars.kcfg:834
#, kde-format
msgid "Show long names in deep-sky object name labels?"
msgstr "Skal lange navn vises i merkelapper på fjerne objekter?"
#. i18n: ectx: whatsthis, entry (DeepSkyLongLabels), group (View)
#. +> trunk5
#: kstars.kcfg:835
#, kde-format
msgid "If true, long names (common names) for deep-sky objects are shown in the labels."
msgstr "Hvis dette er valgt blir det vist lange navn (vanlige navn) i etikettene på fjerne objekter."
#. i18n: ectx: label, entry (MaxRadCometName), group (View)
#. +> trunk5
#: kstars.kcfg:839
#, kde-format
msgid "Maximum distance from Sun for labeling comets, in AU"
msgstr "Største avstand fra Solen for å tegne kometnavn, i AU"
#. i18n: ectx: whatsthis, entry (MaxRadCometName), group (View)
#. +> trunk5
#: kstars.kcfg:840
#, kde-format
msgid "The maximum solar distance for drawing comets."
msgstr "Største avstand fra Solen for å tegne kometer."
#. i18n: ectx: label, entry (UseGL), group (View)
#. +> trunk5
#: kstars.kcfg:844
#, kde-format
msgid "Switch to OpenGL backend"
msgstr "Bytt til OpenGL-motor"
#. i18n: ectx: whatsthis, entry (UseGL), group (View)
#. i18n: ectx: label, entry (RunClock), group (View)
#. +> trunk5
#: kstars.kcfg:849
#, kde-format
msgid "Run clock"
msgstr "La klokka gå"
#. i18n: ectx: whatsthis, entry (RunClock), group (View)
#. +> trunk5
#: kstars.kcfg:850
#, kde-format
msgid "The state of the clock (running or not)"
msgstr "Klokkas tilstand (går eller står)"
#. i18n: ectx: label, entry (ObsListSymbol), group (ObservingList)
#. +> trunk5
#: kstars.kcfg:856
#, kde-format
msgid "Use symbols to label observing list objects"
msgstr "Bruk symboler for å merke objekter på observasjonslista"
#. i18n: ectx: whatsthis, entry (ObsListSymbol), group (ObservingList)
#. +> trunk5
#: kstars.kcfg:857
#, kde-format
msgid "Objects in the observing list will be highlighted with a symbol in the map."
msgstr "Objekter på observasjonslista blir framhevet i kartet med et symbol."
#. i18n: ectx: label, entry (ObsListText), group (ObservingList)
#. +> trunk5
#: kstars.kcfg:861
#, kde-format
msgid "Use text to label observing list objects"
msgstr "Bruk tekst til å merke objekter på observasjonslista"
#. i18n: ectx: whatsthis, entry (ObsListText), group (ObservingList)
#. +> trunk5
#: kstars.kcfg:862
#, kde-format
msgid "Objects in the observing list will be highlighted with a colored name label in the map."
msgstr "Objekter på observasjonslista blir framhevet med en farget navneetikett på himmelkartet."
#. i18n: ectx: label, entry (ObsListPreferDSS), group (ObservingList)
#. +> trunk5
#: kstars.kcfg:866
#, kde-format
msgid "Prefer Digitized Sky Survey imagery in the observing list"
msgstr "Foretrekk bilder fra Digitized Sky Survey i observasjonslista"
#. i18n: ectx: whatsthis, entry (ObsListPreferDSS), group (ObservingList)
#. +> trunk5
#: kstars.kcfg:867
#, kde-format
msgid "The observing list will prefer DSS imagery while downloading imagery."
msgstr "Observasjonslista vil foretrekke DSS-bilder når bilder lastes ned."
#. i18n: ectx: label, entry (ObsListPreferSDSS), group (ObservingList)
#. +> trunk5
#: kstars.kcfg:871
#, kde-format
msgid "Prefer Sloan Digital Sky Survey imagery in the observing list"
msgstr "Foretrekk bilder fra Sloan Digital Sky Survey i observasjonslista"
#. i18n: ectx: whatsthis, entry (ObsListPreferSDSS), group (ObservingList)
#. +> trunk5
#: kstars.kcfg:872
#, kde-format
msgid "The observing list will prefer SDSS imagery while downloading imagery."
msgstr "Observasjonslista vil foretrekke SDSS-bilder når bilder lastes ned."
#. i18n: ectx: label, entry (ObsListDemoteHole), group (ObservingList)
#. +> trunk5
#: kstars.kcfg:876
#, kde-format
msgid "While sorting by percentage altitude in the observing list, demote objects present in the Dobsonian hole"
msgstr ""
#. i18n: ectx: whatsthis, entry (ObsListDemoteHole), group (ObservingList)
#. +> trunk5
#: kstars.kcfg:877
#, kde-format
msgid "Check this if you use a large Dobsonian telescope. Sorting by percentage current altitude is an easy way of determining what objects are well-placed for observation. However, when using a large Dobsonian telescope, objects close to the zenith are hard to observe. Since tracking there corresponds to a rotation in azimuth, it is both counterintuitive and requires the observer to frequently move the ladder. The region around the zenith where this is particularly frustrating is called the Dobsonian hole. This checkbox makes the observing list consider objects present in the hole as unfit for observation."
msgstr ""
#. i18n: ectx: label, entry (ObsListHoleSize), group (ObservingList)
#. +> trunk5
#: kstars.kcfg:881
#, kde-format
msgid "This is the angular distance from the zenith, in degrees, below which you can easily point your telescope."
msgstr ""
#. i18n: ectx: whatsthis, entry (ObsListHoleSize), group (ObservingList)
#. +> trunk5
#: kstars.kcfg:882
#, kde-format
msgid "This specifies the angular radius of the Dobsonian hole, i.e. the region where a large Dobsonian telescope cannot be pointed easily."
msgstr ""
#. i18n: ectx: label, entry (ObsListCoverage), group (ObservingList)
#. i18n: ectx: whatsthis, entry (XplanetLabel), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1121
#, kde-format
msgid "If true, display a label in the upper right corner."
msgstr "Hvis dette er krysset av, så vis en etikett i øvre høyre hjørne."
#. i18n: ectx: label, entry (XplanetLabelLocalTime), group (Xplanet)
#. i18n: ectx: label, entry (XplanetLabelGMT), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1125 kstars.kcfg:1130
#, kde-format
msgid "Show GMT label"
msgstr "Vis GMT-etikett"
#. i18n: ectx: whatsthis, entry (XplanetLabelLocalTime), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1126
#, kde-format
msgid "Show local time."
msgstr "Vis lokal tid."
#. i18n: ectx: whatsthis, entry (XplanetLabelGMT), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1131
#, kde-format
msgid "Show GMT instead of local time."
msgstr "VIs GMT i stedet for lokal tid."
#. i18n: ectx: label, entry (XplanetLabelString), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1135
#, kde-format
msgid "Planet string"
msgstr "Planetstreng"
#. i18n: ectx: whatsthis, entry (XplanetLabelString), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1136
#, fuzzy, no-c-format, kde-format
#| msgid "Specify the text of the first line of the label. By default, it says something like \"Looking at Earth\". Any instances of %t will be replaced by the target name, and any instances of %o will be replaced by the origin name."
msgid "Specify the text of the first line of the label. By default, it says something like \"Looking at Earth\". Any instances of %t will be replaced by the target name, and any instances of %o will be replaced by the origin name."
msgstr "Oppgi teksten for første linje i etiketten. Som standard vil det stå noe slikt som «Ser på Jorden». Alle strenger «%t» blir erstattet med målets navn, og alle strenger «%o» blir erstattet med navnet på startpunktet. "
#. i18n: ectx: label, entry (XplanetFontSize), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1140
#, kde-format
msgid "Font Size"
msgstr "Skriftstørrelse"
#. i18n: ectx: whatsthis, entry (XplanetFontSize), group (Xplanet)
#. i18n: ectx: label, entry (XplanetDateFormat), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1150
#, kde-format
msgid "Date format"
msgstr "Datoformat"
#. i18n: ectx: whatsthis, entry (XplanetDateFormat), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1151
#, fuzzy, no-c-format, kde-format
#| msgid "Specify the format for the date/time label. This format string is passed to strftime(3). The default is \"%c %Z\", which shows the date, time, and time zone in the locale’s appropriate date and time representation."
msgid "Specify the format for the date/time label. This format string is passed to strftime(3). The default is \"%c %Z\", which shows the date, time, and time zone in the locale’s appropriate date and time representation."
msgstr "Oppgi format for dato/tid-etiketten. Denne formatstrengen sendes til strftime(3). Standarden er »%c %Z», som viser dato, tid og tidssone på den måten som stemmer med lokal måte å vise dato og tid. …"
#. i18n: ectx: label, entry (XplanetLabelTL), group (Xplanet)
#. i18n: ectx: whatsthis, entry (XplanetLongitude), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1192
#, fuzzy, kde-format
#| msgid "Place the observer above the specified longitude (in degrees). Longitude is positive going east, negative going west (for the earth and moon), so for example Los Angeles is at -118 or 242. The default value is 0."
msgid "Place the observer above the specified longitude (in degrees). Longitude is positive going east, negative going west (for the earth and moon), so for example Los Angeles is at -118 or 242. The default value is 0."
msgstr "Plasser observatøren over oppgitt lengde (i grader). Lengde er positiv østover, negativ vestover (for Jorden og Månen), så for eksempel Los Angeles er ved -118 eller 242. Standardverdien er 0."
#. i18n: ectx: label, entry (XplanetProjection), group (Xplanet)
#. i18n: ectx: whatsthis, entry (XplanetBackground), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1202
#, kde-format
msgid "Use a file as the background image, with the planet to be superimposed upon it. This option is only meaningful with the -projection option. A color may also be supplied."
msgstr "Bruk en fil som bakgrunnsbilde, med planeten lagt over det. Dette har bare betydning med valget -projection. En farge kan også oppgis."
#. i18n: ectx: label, entry (XplanetBackgroundImage), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1206
#, kde-format
msgid "Use background image"
msgstr "Bruk bakgrunnsbilde"
#. i18n: ectx: whatsthis, entry (XplanetBackgroundImage), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1207
#, kde-format
msgid "Use a file as the background image."
msgstr "Bruk en fil som bakgrunnsbilde."
#. i18n: ectx: label, entry (XplanetBackgroundImagePath), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1211
#, kde-format
msgid "Background image path"
msgstr "Sti til bakgrunnsbilde"
#. i18n: ectx: whatsthis, entry (XplanetBackgroundImagePath), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1212
#, kde-format
msgid "The path of the background image."
msgstr "Stien til bakgrunnsbildet."
#. i18n: ectx: label, entry (XplanetBackgroundColor), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1216
#, kde-format
msgid "Use background color"
msgstr "Bruk bakgrunnsfarge"
#. i18n: ectx: whatsthis, entry (XplanetBackgroundColor), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1217
#, kde-format
msgid "Use a color as the background."
msgstr "Bruk en farge som bakgrunn."
#. i18n: ectx: label, entry (XplanetBackgroundColorValue), group (Xplanet)
msgid "A star of the specified magnitude will have a pixel brightness of 1. The default value is 10. Stars will be drawn more brightly if this number is larger."
msgstr "En stjerne av den gitte størrelsesklassen får en piksel-lysstyrke på 1. Standardverdien er 10. Stjerner blir tegnet med større lysstyrke hvis dette tallet er større."
#. i18n: ectx: label, entry (XplanetArcFile), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1231
#, kde-format
msgid "Arc file"
msgstr "Buefil"
#. i18n: ectx: whatsthis, entry (XplanetArcFile), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1232
#, kde-format
msgid "If checked, use an arc file to be plotted against the background stars."
msgstr "Hvis dette er krysset av, så tegn opp en bue-fil mot bakgrunnsstjernene."
#. i18n: ectx: label, entry (XplanetArcFilePath), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1236
#, kde-format
msgid "Path to arc file"
msgstr "Sti til buefil"
#. i18n: ectx: whatsthis, entry (XplanetArcFilePath), group (Xplanet)
#. i18n: ectx: whatsthis, entry (AlwaysRecomputeCoordinates), group (General)
#. +> trunk5
#: kstars.kcfg:1320
#, kde-format
msgid "Checking this option causes recomputation of current equatorial coordinates from catalog coordinates (i.e. application of precession, nutation and aberration corrections) for every redraw of the map. This makes processing slower when there are many stars to handle, but is more likely to be bug free. There are known bugs in the rendering of stars when this recomputation is avoided."
msgstr "Hvis dette krysses av blir gjeldende ekvatorialkoordinater beregnet på nytt fra katalogkoordinater (dvs. korreksjoner for presesjon, nutasjon og aberrasjon blir tatt i bru) hver gang himmelkartet tegnes på nytt. Dette gjør behandlingen langsommere når det er mange stjerner som skal vises, men resultatet blir antakelig feilfritt. Det er kjente feil i opptegning av stjerner når denne omregningen sløyfes."
#. i18n: ectx: label, entry (DefaultDSSImageSize), group (General)
#. +> trunk5
#: kstars.kcfg:1324
#, kde-format
msgid "Default size for DSS images"
msgstr "Standard størrelse for DSS-bilder"
#. i18n: ectx: whatsthis, entry (DefaultDSSImageSize), group (General)
#. +> trunk5
#: kstars.kcfg:1325
#, fuzzy, kde-format
#| msgid "The default size for DSS images downloaded from the internet."
msgid "The default size for DSS images downloaded from the Internet."
msgstr "Standard størrelse for DSS-bilder lastet ned fra Internett."
#. i18n: ectx: label, entry (DSSPadding), group (General)
#. +> trunk5
#: kstars.kcfg:1329
#, kde-format
msgid "Additional padding around DSS Images of deep-sky objects"
msgstr "Tilleggsfylling rundt DSS-bilder av fjerne objekter"
#. i18n: ectx: whatsthis, entry (DSSPadding), group (General)
#. +> trunk5
#: kstars.kcfg:1330
#, kde-format
msgid "To include parts of the star field, we add some extra padding around DSS images of deep-sky objects. This option configures the total (both sides) padding added to either dimension of the field."
msgstr "For å ta med deler av stjernefeltet legger vi til litt ekstra luft rundt DSS-bilder av fjerne objekter. Dette valget bestemmer totalt luftfyll (begge sider) som legges til begge dimensjoner i feltet."
#. i18n: ectx: label, entry (VerboseLogging), group (General)
#. +> trunk5
#: kstars.kcfg:1334
#, fuzzy, kde-format
#| msgid "&Enable Logging"
msgid "Enable Verbose Logging"
msgstr "Slå &på logging"
#. i18n: ectx: whatsthis, entry (VerboseLogging), group (General)
#. +> trunk5
#: kstars.kcfg:1335
#, kde-format
msgid "Checking this option causes KStars to generate verbose debug information for diagnostic purposes. This may cause slowdown of KStars."
msgstr ""
#. i18n: ectx: label, entry (RegularLogging), group (General)
#. +> trunk5
#: kstars.kcfg:1339
#, fuzzy, kde-format
#| msgid "Enable logging"
msgid "Enable Regular Logging"
msgstr "Slå på logging"
#. i18n: ectx: whatsthis, entry (RegularLogging), group (General)
#. +> trunk5
#: kstars.kcfg:1340
#, kde-format
msgid "Checking this option causes KStars to generate regular debug information."
msgstr ""
#. i18n: ectx: label, entry (DisableLogging), group (General)
#. +> trunk5
#: kstars.kcfg:1344
#, kde-format
msgid "Disable Verbose Logging"
msgstr ""
#. i18n: ectx: whatsthis, entry (DisableLogging), group (General)
#. +> trunk5
#: kstars.kcfg:1345
#, kde-format
msgid "Checking this option causes KStars to stop generating ANY debug information."
msgstr ""
#. i18n: ectx: label, entry (LogToDefault), group (General)
#. +> trunk5
#: kstars.kcfg:1349
#, kde-format
msgid "Log debug message to default output"
msgstr ""
#. i18n: ectx: whatsthis, entry (LogToDefault), group (General)
#. +> trunk5
#: kstars.kcfg:1350
#, kde-format
msgid "Checking this option causes KStars log debug messages to the default output used by the platform (e.g. Standard Error)."
msgstr ""
#. i18n: ectx: label, entry (LogToFile), group (General)
#. +> trunk5
#: kstars.kcfg:1354
#, kde-format
msgid "Log debug message to a log file"
msgstr ""
#. i18n: ectx: whatsthis, entry (LogToFile), group (General)
#. +> trunk5
#: kstars.kcfg:1355
#, kde-format
msgid "Checking this option causes KStars log debug messages to a log file as specified."
msgstr ""
#. i18n: ectx: whatsthis, entry (FITSLogging), group (General)
#. +> trunk5
#: kstars.kcfg:1359
#, fuzzy, kde-format
msgid "Log FITS Data activity."
msgstr "Park"
#. i18n: ectx: whatsthis, entry (INDILogging), group (General)
#. +> trunk5
#: kstars.kcfg:1363
#, fuzzy, kde-format
msgid "Log INDI devices activity."
msgstr "Park"
#. i18n: ectx: whatsthis, entry (CaptureLogging), group (General)
#. +> trunk5
#: kstars.kcfg:1367
#, fuzzy, kde-format
msgid "Log Ekos Capture Module activity."
msgstr "Park"
#. i18n: ectx: whatsthis, entry (FocusLogging), group (General)
#. +> trunk5
#: kstars.kcfg:1371
#, fuzzy, kde-format
msgid "Log Ekos Focus Module activity."
msgstr "Park"
#. i18n: ectx: whatsthis, entry (GuideLogging), group (General)
#. +> trunk5
#: kstars.kcfg:1375
#, fuzzy, kde-format
msgid "Log Ekos Guide Module activity."
msgstr "Park"
#. i18n: ectx: whatsthis, entry (AlignmentLogging), group (General)
#. +> trunk5
#: kstars.kcfg:1379
#, fuzzy, kde-format
msgid "Log Ekos Alignment Module activity."
msgstr "Park"
#. i18n: ectx: whatsthis, entry (MountLogging), group (General)
#. +> trunk5
#: kstars.kcfg:1383
#, fuzzy, kde-format
msgid "Log Ekos Mount Module activity."
msgstr "Park"
#. i18n: ectx: whatsthis, entry (ObservatoryLogging), group (General)
#. +> trunk5
#: kstars.kcfg:1387
#, fuzzy, kde-format
msgid "Log Ekos Observatory Module activity."
msgstr "Park"
#. i18n: ectx: label, entry (useFITSViewer), group (FITSViewer)
#. +> trunk5
#: kstars.kcfg:1393
#, kde-format
msgid "Display every image captured in a FITS Viewer window."
msgstr ""
#. i18n: ectx: label, entry (singlePreviewFITS), group (FITSViewer)
#. +> trunk5
#: kstars.kcfg:1397
#, fuzzy, kde-format
#| msgid "Preview single items"
msgid "Preview FITS in a single tab?"
msgstr "Forhåndsvis enkeltelementer"
#. i18n: ectx: label, entry (singleWindowCapturedFITS), group (FITSViewer)
#. +> trunk5
#: kstars.kcfg:1402
#, kde-format
msgid "Display all captured FITS in one window?"
msgstr ""
#. i18n: ectx: whatsthis, entry (singleWindowCapturedFITS), group (FITSViewer)
#. +> trunk5
#: kstars.kcfg:1403
#, kde-format
msgid "Display all captured FITS images in a single FITS Viewer window. By default each camera create its own FITS Viewer instance"
msgstr ""
#. i18n: ectx: label, entry (singleWindowOpenedFITS), group (FITSViewer)
#. +> trunk5
#: kstars.kcfg:1407
#, kde-format
msgid "Display all opened FITS in one window?"
msgstr ""
#. i18n: ectx: whatsthis, entry (singleWindowOpenedFITS), group (FITSViewer)
#. +> trunk5
#: kstars.kcfg:1408
#, kde-format
msgid "Display all opened FITS images in a single FITS Viewer window."
msgstr ""
#. i18n: ectx: whatsthis, entry (focusFITSOnNewImage), group (FITSViewer)
#. +> trunk5
#: kstars.kcfg:1412
#, kde-format
msgid "Bring the FITSViewer window to the foreground when receiving a new image."
msgstr ""
#. i18n: ectx: label, entry (independentWindowFITS), group (FITSViewer)
#. +> trunk5
#: kstars.kcfg:1416
#, kde-format
msgid "Make FITS Viewer window independent of KStars main window"
msgstr ""
#. i18n: ectx: label, entry (AutoDebayer), group (FITSViewer)
#. +> trunk5
#: kstars.kcfg:1420
#, kde-format
msgid "Automatically debayer a FITS image if it is contains a bayer pattern"
msgstr ""
#. i18n: ectx: label, entry (AutoImageToFITS), group (FITSViewer)
#. +> trunk5
#: kstars.kcfg:1424
#, kde-format
msgid "Convert received non-FITS images to FITS for display purposes."
msgstr ""
#. i18n: ectx: label, entry (Auto3DCube), group (FITSViewer)
#. +> trunk5
#: kstars.kcfg:1428
#, kde-format
msgid "Process 3D FITS Cube (RGB). If false, only first channel is processed."
msgstr ""
#. i18n: ectx: label, entry (AutoWCS), group (FITSViewer)
#. +> trunk5
#: kstars.kcfg:1432
#, kde-format
msgid "Automatically process World-Coordinate-System (WCS) data when loading a FITS file."
msgstr ""
#. i18n: ectx: label, entry (LimitedResourcesMode), group (FITSViewer)
#. +> trunk5
#: kstars.kcfg:1436
#, kde-format
msgid "Conserve CPU and memory by disabling all resource-intensive features in FITS Viewer"
msgstr ""
#. i18n: ectx: label, entry (BortleClass), group (WISettings)
#. +> trunk5
#: kstars.kcfg:1442
#, kde-format
msgid "Bortle dark-sky rating"
msgstr "Bortle indeks for mørk himmel"
#. i18n: ectx: label, entry (TelescopeCheck), group (WISettings)
#. +> trunk5
#: kstars.kcfg:1446
#, kde-format
msgid "Availability of telescope"
msgstr "Tilgjengelighet til teleskopet"
#. i18n: ectx: label, entry (BinocularsCheck), group (WISettings)
#. +> trunk5
#: kstars.kcfg:1450
#, kde-format
msgid "Availability of binoculars"
msgstr "Tilgjengelighet til kikkerter"
#. i18n: ectx: label, entry (BinocularsAperture), group (WISettings)
#. +> trunk5
#: kstars.kcfg:1454
#, kde-format
msgid "Aperture of available binocular"
msgstr "Åpning for tilgjengelig kikkert"
#. i18n: ectx: label, entry (ScopeListIndex), group (WISettings)
#. +> trunk5
#: kstars.kcfg:1458
#, kde-format
msgid "Index of selected scope from list of scopes"
msgstr "Indeks for valgt skop i liste over skop"
#. i18n: ectx: label, entry (EkosWindowWidth), group (Ekos)
#. +> trunk5
#: kstars.kcfg:1464
#, fuzzy, kde-format
#| msgctxt "@label"
#| msgid "Window width"
msgid "Ekos window width"
msgstr "Vindusbredde"
#. i18n: ectx: label, entry (EkosWindowHeight), group (Ekos)
#. +> trunk5
#: kstars.kcfg:1468
#, fuzzy, kde-format
#| msgctxt "@label"
#| msgid "Window height"
msgid "Ekos window height"
msgstr "Vindushøyde"
#. i18n: ectx: label, entry (EkosLeftIcons), group (Ekos)
#. +> trunk5
#: kstars.kcfg:1476
#, kde-format
msgid "Ekos modules icons are placed to the left of pages"
msgstr ""
#. i18n: ectx: label, entry (RememberCredentials), group (Ekos)
#. +> trunk5
#: kstars.kcfg:1480
#, kde-format
msgid "Remember Ekos Live credentials."
msgstr ""
#. i18n: ectx: label, entry (AutoStartEkosLive), group (Ekos)
#. +> trunk5
#: kstars.kcfg:1484
#, kde-format
msgid "Start Ekos Live on KStars startup."
msgstr ""
#. i18n: ectx: label, entry (EkosLiveOnline), group (Ekos)
#. +> trunk5
#: kstars.kcfg:1488
#, kde-format
msgid "Whether EkosLive connection mode is online."
msgstr ""
#. i18n: ectx: label, entry (EkosLiveUsername), group (Ekos)
#. +> trunk5
#: kstars.kcfg:1492
#, kde-format
msgid "EkosLive username"
msgstr ""
#. i18n: ectx: label, entry (independentWindowEkos), group (Ekos)
#. +> trunk5
#: kstars.kcfg:1495
#, kde-format
msgid "Make Ekos window independent of KStars main window"
msgstr ""
#. i18n: ectx: label, entry (profile), group (Ekos)
#. +> trunk5
#: kstars.kcfg:1499
#, fuzzy, kde-format
#| msgctxt "Note this is a KRunner keyword"
#| msgid "power profile"
msgid "Ekos drivers profile"
msgstr "strømprofil"
#. i18n: ectx: label, entry (neverLoadConfig), group (Ekos)
#. +> trunk5
#: kstars.kcfg:1503
#, kde-format
msgid "Never load device configuration?"
msgstr "Last aldri enhetsoppsett?"
#. i18n: ectx: label, entry (loadConfigOnConnection), group (Ekos)
#. +> trunk5
#: kstars.kcfg:1507
#, kde-format
msgid "Load device configuration upon successful connection?"
msgstr "Laste enhetens standardoppsett ved vellykket tilkobling?"
#. i18n: ectx: label, entry (loadDefaultConfig), group (Ekos)
#. +> trunk5
#: kstars.kcfg:1511
#, kde-format
msgid "Always load device default configuration upon successful connection?"
msgstr "Skal enhetens standardoppsett alltid lastes ved vellykket tilkobling?"
#. i18n: ectx: label, entry (autoLoadSerialAssistant), group (Ekos)
#. +> trunk5
#: kstars.kcfg:1515
#, kde-format
msgid "Automatically load Serial Port Assistant tool when detecting unmapped serial ports?"
msgstr ""
#. i18n: ectx: label, entry (shutterfulCCDs), group (DarkLibrary)
#. +> trunk5
#: kstars.kcfg:1525
#, kde-format
msgid "List of CCDs with mechanical or electronic shutters."
msgstr ""
#. i18n: ectx: label, entry (shutterlessCCDs), group (DarkLibrary)
#. +> trunk5
#: kstars.kcfg:1528
#, kde-format
msgid "List of CCDs without mechanical or electronic shutters."
msgstr ""
#. i18n: ectx: label, entry (MinimumAltLimit), group (Mount)
#. +> trunk5
#: kstars.kcfg:1533
#, kde-format
msgid "Default minimum mount altitude limit"
msgstr ""
#. i18n: ectx: label, entry (MaximumAltLimit), group (Mount)
#. +> trunk5
#: kstars.kcfg:1538
#, kde-format
msgid "Default maximum mount altitude limit."
msgstr ""
#. i18n: ectx: whatsthis, entry (MaximumAltLimit), group (Mount)
#. +> trunk5
#: kstars.kcfg:1539
#, kde-format
msgid "Maximum telescope altitude limit. If the telescope is above this limit, it will be commanded to stop."
msgstr ""
#. i18n: ectx: label, entry (EnableAltitudeLimits), group (Mount)
#. +> trunk5
#: kstars.kcfg:1543
#, kde-format
msgid "Enable mount altitude limits."
msgstr ""
#. i18n: ectx: label, entry (MeridianFlipOffset), group (Mount)
#. +> trunk5
#: kstars.kcfg:1547
#, fuzzy, kde-format
msgid "Default hour angle to perform meridian flip"
msgstr "Park"
#. i18n: ectx: whatsthis, entry (MeridianFlipOffset), group (Mount)
#. +> trunk5
#: kstars.kcfg:1548
#, kde-format
msgid "If the target hour angle exceeds this value, Ekos will command a meridian flip and if successful it will resume guiding and capture operations."
msgstr ""
#. i18n: ectx: label, entry (ExecuteMeridianFlip), group (Mount)
#. +> trunk5
#: kstars.kcfg:1551
#, kde-format
msgid "Flips the mount when reaching the meridian, if supported."
msgstr ""
#. i18n: ectx: label, entry (MeridianFlipUnitDegrees), group (Mount)
#. +> trunk5
#: kstars.kcfg:1555
#, kde-format
msgid "Sets the display unit for meridian flip to degrees."
msgstr ""
#. i18n: ectx: label, entry (LeftRightReversed), group (Mount)
#. +> trunk5
#: kstars.kcfg:1559
#, kde-format
msgid "Reverse the direction of right and left buttons in mount control."
msgstr ""
#. i18n: ectx: label, entry (UpDownReversed), group (Mount)
#. +> trunk5
#: kstars.kcfg:1563
#, kde-format
msgid "Reverse the direction of up and down buttons in mount control."
msgstr ""
#. i18n: ectx: label, entry (ParkEveryDay), group (Mount)
#. +> trunk5
#: kstars.kcfg:1567
#, kde-format
msgid "Automatically start parking timer on startup."
msgstr ""
#. i18n: ectx: label, entry (ParkTime), group (Mount)
#. +> trunk5
#: kstars.kcfg:1571
#, kde-format
msgid "Park mount at this time in 12 hour format."
msgstr ""
#. i18n: ectx: label, entry (DefaultCaptureCCD), group (Capture)
#. +> trunk5
#: kstars.kcfg:1577
#, kde-format
msgid "Default capture module CCD."
msgstr ""
#. i18n: ectx: label, entry (DefaultObserver), group (Capture)
#. +> trunk5
#: kstars.kcfg:1580
#, fuzzy, kde-format
#| msgid "Default user name"
msgid "Default observer full name."
msgstr "Standard brukernavn"
#. i18n: ectx: label, entry (SyncFOVPA), group (Capture)
#. +> trunk5
#: kstars.kcfg:1583
#, kde-format
msgid "Sync FOV indicator Position Angle with Rotator Settings Position Angle"
msgstr ""
#. i18n: ectx: label, entry (PAMultiplier), group (Capture)
#. +> trunk5
#: kstars.kcfg:1587
#, fuzzy, kde-format
#| msgid "Position Angle"
msgid "Position angle multiplier"
msgstr "Posisjonsvinkel"
#. i18n: ectx: label, entry (PAOffset), group (Capture)
#. +> trunk5
#: kstars.kcfg:1591
#, fuzzy, kde-format
#| msgid "Position Angle"
msgid "Position angle offset"
msgstr "Posisjonsvinkel"
#. i18n: ectx: label, entry (GuideDeviation), group (Capture)
#. +> trunk5
#: kstars.kcfg:1595
#, kde-format
msgid "Default maximum permittable guide deviation"
msgstr ""
#. i18n: ectx: whatsthis, entry (GuideDeviation), group (Capture)
#. +> trunk5
#: kstars.kcfg:1596
#, kde-format
msgid "If guide deviation exceeds this limit, the exposure will be automatically aborted and only resumed when the deviation is within this limit."
msgstr ""
#. i18n: ectx: label, entry (HFRDeviation), group (Capture)
#. +> trunk5
#: kstars.kcfg:1600
#, kde-format
msgid "Default maximum permittable HFR deviation"
msgstr ""
#. i18n: ectx: whatsthis, entry (HFRDeviation), group (Capture)
#. +> trunk5
#: kstars.kcfg:1601
#, kde-format
msgid "If HFR deviation exceeds this limit, the autofocus routine will be automatically started."
msgstr ""
#. i18n: ectx: label, entry (EnforceGuideDeviation), group (Capture)
#. +> trunk5
#: kstars.kcfg:1605
#, kde-format
msgid "Enforce guiding deviation limit."
msgstr ""
#. i18n: ectx: label, entry (EnforceAutofocus), group (Capture)
#. +> trunk5
#: kstars.kcfg:1609
#, kde-format
msgid "Enforce Autofocus HFR limit."
msgstr ""
#. i18n: ectx: label, entry (EnforceRefocusEveryN), group (Capture)
#. +> trunk5
#: kstars.kcfg:1613
#, kde-format
msgid "Enforce Refocus Every N Minutes."
msgstr ""
#. i18n: ectx: label, entry (RefocusEveryN), group (Capture)
#. +> trunk5
#: kstars.kcfg:1617
#, kde-format
msgid "Number of minute between forced refocus attempts"
msgstr ""
#. i18n: ectx: whatsthis, entry (RefocusEveryN), group (Capture)
#. +> trunk5
#: kstars.kcfg:1618
#, kde-format
msgid "Sets the time interval before forced autofocus attempts during a capture sequence."
msgstr ""
#. i18n: ectx: label, entry (ResetMountModelAfterMeridian), group (Capture)
#. +> trunk5
#: kstars.kcfg:1622
#, fuzzy, kde-format
msgid "Reset mount model after meridian flip."
msgstr "Park"
#. i18n: ectx: label, entry (CalibrationADUValue), group (Capture)
#. +> trunk5
#: kstars.kcfg:1626
#, kde-format
msgid "Desired flat field ADU"
msgstr ""
#. i18n: ectx: whatsthis, entry (CalibrationADUValue), group (Capture)
#. +> trunk5
#: kstars.kcfg:1627
#, kde-format
msgid "If set, Ekos will capture a few flat images to determine the optimal exposure time to achieve the desired ADU value."
msgstr ""
#. i18n: ectx: label, entry (CalibrationADUValueTolerance), group (Capture)
#. +> trunk5
#: kstars.kcfg:1631
#, kde-format
msgid "ADU Value tolerance"
msgstr ""
#. i18n: ectx: whatsthis, entry (CalibrationADUValueTolerance), group (Capture)
#. +> trunk5
#: kstars.kcfg:1632
#, kde-format
msgid "Maximum difference between measured and target ADU values to deem the value as acceptable."
msgstr ""
#. i18n: ectx: label, entry (CalibrationFlatSourceIndex), group (Capture)
#. +> trunk5
#: kstars.kcfg:1636
#, kde-format
msgid "Index of flat source option."
msgstr ""
#. i18n: ectx: label, entry (CalibrationFlatDurationIndex), group (Capture)
#. +> trunk5
#: kstars.kcfg:1640
#, kde-format
msgid "Index of flat duration option."
msgstr ""
#. i18n: ectx: label, entry (CalibrationWallAz), group (Capture)
#. +> trunk5
#: kstars.kcfg:1644
#, kde-format
msgid "Azimuth of calibration wall location."
msgstr ""
#. i18n: ectx: label, entry (CalibrationWallAlt), group (Capture)
#. +> trunk5
#: kstars.kcfg:1648
#, kde-format
msgid "Altitude of calibration wall location."
msgstr ""
#. i18n: ectx: label, entry (MaxTemperatureDiff), group (Capture)
#. +> trunk5
#: kstars.kcfg:1652
#, kde-format
msgid "Maximum acceptable difference between requested and measured temperature set point."
msgstr ""
#. i18n: ectx: label, entry (GuidingSettle), group (Capture)
#. +> trunk5
#: kstars.kcfg:1656
#, kde-format
msgid "Wait this many seconds after guiding is resumed before starting capture."
msgstr ""
#. i18n: ectx: label, entry (FlatSyncFocus), group (Capture)
#. +> trunk5
#: kstars.kcfg:1664
#, kde-format
msgid "Capture flat frames at the same focus position of light frames."
msgstr ""
#. i18n: ectx: label, entry (HFRThresholdPercentage), group (Capture)
#. +> trunk5
#: kstars.kcfg:1668
#, kde-format
msgid "Increase autofocus HFR value by this percentage gain and store it in Capture Module."
msgstr ""
#. i18n: ectx: label, entry (UseMedianFocus), group (Capture)
#. +> trunk5
#: kstars.kcfg:1672
#, kde-format
msgid "Calculate median focus value after each autofocus operation is complete."
msgstr ""
#. i18n: ectx: label, entry (SaveHFRToFile), group (Capture)
#. +> trunk5
#: kstars.kcfg:1676
#, kde-format
msgid "When saving a sequence file, save current HFR threshold value. By default, zero value is used."
msgstr ""
#. i18n: ectx: label, entry (AutoStretch), group (Capture)
#. +> trunk5
#: kstars.kcfg:1688
#, kde-format
msgid "Perform auto stretch on captured images in FITS Viewer."
msgstr ""
#. i18n: ectx: label, entry (useSummaryPreview), group (Capture)
#. +> trunk5
#: kstars.kcfg:1692
#, kde-format
msgid "Display every image captured sequence image in the Ekos summary screen preview window."
msgstr ""
#. i18n: ectx: label, entry (useDSLRImageViewer), group (Capture)
#. +> trunk5
#: kstars.kcfg:1696
#, kde-format
msgid "Display every captured DSLR image in the Image Viewer window."
msgstr ""
#. i18n: ectx: label, entry (CaptureFormatIndex), group (Capture)
#. +> trunk5
#: kstars.kcfg:1700
#, kde-format
msgid "Index of desired capture format (FITS or Native)."
msgstr ""
#. i18n: ectx: label, entry (CaptureDirectory), group (Capture)
#. +> trunk5
#: kstars.kcfg:1704
#, kde-format
msgid "Path to capture directory to save images."
msgstr ""
#. i18n: ectx: label, entry (RemoteCaptureDirectory), group (Capture)
#. +> trunk5
#: kstars.kcfg:1708
#, kde-format
msgid "Path to remote capture directory to save images."
msgstr ""
#. i18n: ectx: label, entry (ManualCoverTimeout), group (Capture)
#. +> trunk5
#: kstars.kcfg:1711
#, kde-format
msgid "Cover or uncover telescope dialog timeout in seconds."
msgstr ""
#. i18n: ectx: label, entry (fileSettingsUseFilter), group (Capture)
#. +> trunk5
#: kstars.kcfg:1715
#, kde-format
msgid "Add the filter name to the capture file name."
msgstr ""
#. i18n: ectx: label, entry (fileSettingsUseDuration), group (Capture)
#. +> trunk5
#: kstars.kcfg:1719
#, kde-format
msgid "Add the capture duration to the capture file name."
msgstr ""
#. i18n: ectx: label, entry (fileSettingsUseTimestamp), group (Capture)
#. +> trunk5
#: kstars.kcfg:1723
#, kde-format
msgid "Add the capture timestamp to the capture file name."
msgstr ""
#. i18n: ectx: label, entry (DefaultFocusCCD), group (Focus)
#. +> trunk5
#: kstars.kcfg:1729
#, kde-format
msgid "Default focus module CCD."
msgstr ""
#. i18n: ectx: label, entry (DefaultFocusFocuser), group (Focus)
#. +> trunk5
#: kstars.kcfg:1732
#, kde-format
msgid "Default focus module focuser."
msgstr ""
#. i18n: ectx: label, entry (DefaultFocusFilterWheel), group (Focus)
#. +> trunk5
#: kstars.kcfg:1735
#, kde-format
msgid "Default focus module filter wheel."
msgstr ""
#. i18n: ectx: label, entry (FocusTicks), group (Focus)
#. +> trunk5
#: kstars.kcfg:1738
#, kde-format
msgid "Default Focuser step ticks"
msgstr "Standard stegstørrelse for fokuserer"
#. i18n: ectx: whatsthis, entry (FocusTicks), group (Focus)
#. +> trunk5
#: kstars.kcfg:1739
#, kde-format
msgid "Step size of the absolute focuser. The step size TICKS should be adjusted so that when the focuser moves TICKS steps, the difference in HFR is more than 0.1 pixels. Lower the value when you are close to optimal focus."
msgstr "Stegstørrelse for den absolutte fokusereren. Stegstørrelsen TICKS må justeres slik at når fokusereren flytter TICKS steg, så er forskjelllen i HFR mer enn 0.1 piksler. Minsk verdien når du er nær beste fokus."
#. i18n: ectx: whatsthis, entry (FocusSettleTime), group (Focus)
#. +> trunk5
#: kstars.kcfg:1743
#, kde-format
msgid "Wait for this many seconds after moving the focuser before capturing the next image during AutoFocus."
msgstr ""
#. i18n: ectx: whatsthis, entry (GuideSettleTime), group (Focus)
#. +> trunk5
#: kstars.kcfg:1747
#, kde-format
msgid "Wait for this many seconds after resuming guide."
msgstr ""
#. i18n: ectx: label, entry (FocusTolerance), group (Focus)
#. +> trunk5
#: kstars.kcfg:1751
#, kde-format
msgid "Default Focuser tolerance value"
msgstr "Standard tolreanseverdi for fokusering"
#. i18n: ectx: whatsthis, entry (FocusTolerance), group (Focus)
#. +> trunk5
#: kstars.kcfg:1752
#, kde-format
msgid "The tolerance specifies the percentage difference between the current focusing position and the minimum obtained during the focusing run. Adjustment of this value is necessary to prevent the focusing algorithm from oscillating back and forth."
msgstr "Toleransen oppgir forskjellen i prosent mellom nåværende fokusposisjon og den minste som ble funnet under fokuskjøring. Denne verdien må justeres for å unngå at fokuseringsalgoritmen svinger fram og tilbake."
#. i18n: ectx: label, entry (FocusMaxTravel), group (Focus)
#. +> trunk5
#: kstars.kcfg:1756
#, fuzzy, kde-format
#| msgid "Maximum Distance:"
msgid "Maximum Focus Travel Distance"
msgstr "Maksimal avstand:"
#. i18n: ectx: whatsthis, entry (FocusMaxTravel), group (Focus)
#. +> trunk5
#: kstars.kcfg:1757
#, kde-format
msgid "Set the maximum travel distance of an absolute focuser."
msgstr ""
#. i18n: ectx: label, entry (FocusGain), group (Focus)
#. +> trunk5
#: kstars.kcfg:1761
#, fuzzy, kde-format
#| msgid "Default Focuser tolerance value"
msgid "Default Focuser gain value"
msgstr "Standard tolreanseverdi for fokusering"
#. i18n: ectx: whatsthis, entry (FocusGain), group (Focus)
#. +> trunk5
#: kstars.kcfg:1762
#, kde-format
msgid "Specifies gain value of CCD when performing focusing if supported by camera."
msgstr ""
#. i18n: ectx: label, entry (FocusBoxSize), group (Focus)
#. +> trunk5
#: kstars.kcfg:1766
#, kde-format
msgid "Default Focuser star selection box size"
msgstr "Standard boks-størrelse for fokuserers valg av stjerne"
#. i18n: ectx: whatsthis, entry (FocusBoxSize), group (Focus)
#. +> trunk5
#: kstars.kcfg:1767
#, kde-format
msgid "Set box size to select a focus star."
msgstr "Oppgi boks-størrelse for å velge en fokus-stjerne"
#. i18n: ectx: label, entry (FocusXBin), group (Focus)
#. +> trunk5
#: kstars.kcfg:1771
#, kde-format
msgid "Default CCD X binning in focus mode"
msgstr ""
#. i18n: ectx: whatsthis, entry (FocusXBin), group (Focus)
#. +> trunk5
#: kstars.kcfg:1772
#, kde-format
msgid "Set horizontal binning of CCD camera while in focus mode."
msgstr ""
#. i18n: ectx: label, entry (FocusYBin), group (Focus)
#. +> trunk5
#: kstars.kcfg:1776
#, kde-format
msgid "Default CCD Y binning in focus mode"
msgstr ""
#. i18n: ectx: whatsthis, entry (FocusYBin), group (Focus)
#. +> trunk5
#: kstars.kcfg:1777
#, kde-format
msgid "Set vertical binning of CCD camera while in focus mode."
msgstr ""
#. i18n: ectx: label, entry (FocusSubFrame), group (Focus)
#. +> trunk5
#: kstars.kcfg:1781
#, fuzzy, kde-format
msgid "Subframe the focus star during the autofocus procedure."
msgstr "Park"
#. i18n: ectx: label, entry (FocusUseFullField), group (Focus)
#. +> trunk5
#: kstars.kcfg:1785
#, kde-format
msgid "Measure average HFR from all stars combined in a full frame. This method defaults to the Centroid detection, but can use SEP detection too. Its performance decreases as the number of stars increases."
msgstr ""
#. i18n: ectx: label, entry (FocusFullFieldInnerRadius), group (Focus)
#. +> trunk5
#: kstars.kcfg:1789
#, kde-format
msgid "Full field inner radius."
msgstr ""
#. i18n: ectx: whatsthis, entry (FocusFullFieldInnerRadius), group (Focus)
#. +> trunk5
#: kstars.kcfg:1790
#, no-c-format, kde-format
msgid "During full field focusing, stars which are inside this percentage of the frame are filtered out of HFR calculation (default 0%). Detection algorithms may also have an inherent filter."
msgstr ""
#. i18n: ectx: label, entry (FocusFullFieldOuterRadius), group (Focus)
#. +> trunk5
#: kstars.kcfg:1794
#, kde-format
msgid "Full field outer radius."
msgstr ""
#. i18n: ectx: whatsthis, entry (FocusFullFieldOuterRadius), group (Focus)
#. +> trunk5
#: kstars.kcfg:1795
#, no-c-format, kde-format
msgid "During full field focusing, stars which are outside this percentage of the frame are filtered out of HFR calculation (default 100%). Detection algorithms may also have an inherent filter."
msgstr ""
#. i18n: ectx: label, entry (FocusAutoStarEnabled), group (Focus)
#. +> trunk5
#: kstars.kcfg:1799
#, kde-format
msgid "Automatically select a star to focus."
msgstr "Velg automatisk en stjerne å fokusere på"
#. i18n: ectx: label, entry (SuspendGuiding), group (Focus)
#. +> trunk5
#: kstars.kcfg:1803
#, fuzzy, kde-format
msgid "Suspend guiding while autofocus in progress."
msgstr "Park"
#. i18n: ectx: label, entry (UseFocusDarkFrame), group (Focus)
#. +> trunk5
#: kstars.kcfg:1807
#, kde-format
msgid "Take a dark frame and subtract it before running autofocus operation."
msgstr ""
#. i18n: ectx: label, entry (FocusEffect), group (Focus)
#. +> trunk5
#: kstars.kcfg:1811
#, kde-format
msgid "Image filter to be applied to focus image upon loading."
msgstr ""
#. i18n: ectx: label, entry (FocusThreshold), group (Focus)
#. +> trunk5
#: kstars.kcfg:1815
#, kde-format
msgid "Relative percentage strength of centroid edge pixel strength to average pixel value."
msgstr ""
#. i18n: ectx: label, entry (FocusDetection), group (Focus)
#. +> trunk5
#: kstars.kcfg:1819
#, fuzzy, kde-format
#| msgid "Authentication algorithm"
msgid "Star detection algorithm"
msgstr "Autentiseringsalgoritme"
#. i18n: ectx: label, entry (FocusAlgorithm), group (Focus)
#. +> trunk5
#: kstars.kcfg:1823
#, kde-format
msgid "Focus process algorithm"
msgstr ""
#. i18n: ectx: label, entry (FocusFramesCount), group (Focus)
#. +> trunk5
#: kstars.kcfg:1827
#, kde-format
msgid "Number of focus frames to average for HFR calculations."
msgstr ""
#. i18n: ectx: label, entry (DefaultAlignCCD), group (Align)
#. +> trunk5
#: kstars.kcfg:1833
#, fuzzy, kde-format
#| msgid "Default input mode"
msgid "Default align module CCD."
msgstr "Standard inndata-modus"
#. i18n: ectx: label, entry (DefaultAlignFW), group (Align)
#. +> trunk5
#: kstars.kcfg:1836
#, kde-format
msgid "Default align module Filter Wheel."
msgstr ""
#. i18n: ectx: label, entry (AlignExposure), group (Align)
#. +> trunk5
#: kstars.kcfg:1839
#, kde-format
msgid "Default alignment exposure value"
msgstr "Standard eksponeringsverdi for innretting"
#. i18n: ectx: whatsthis, entry (AlignExposure), group (Align)
#. +> trunk5
#: kstars.kcfg:1840
#, kde-format
msgid "Specifies exposure value of CCD in seconds when performing plate solving."
msgstr ""
#. i18n: ectx: label, entry (SolverBinningIndex), group (Align)
#. +> trunk5
#: kstars.kcfg:1844
#, kde-format
msgid "Default CCD binning index while in alignment mode"
msgstr ""
#. i18n: ectx: whatsthis, entry (SolverBinningIndex), group (Align)
#. +> trunk5
#: kstars.kcfg:1845
#, kde-format
msgid "Set binning index of CCD camera while in alignment mode. Default values 0-3 corresponding to 1x1 to 4x4 binning. 4 is max binning."
msgstr ""
#. i18n: ectx: whatsthis, entry (AstrometryUseRotator), group (Align)
#. +> trunk5
#: kstars.kcfg:1849
#, kde-format
msgid "Use rotator when performing load and slew."
msgstr ""
#. i18n: ectx: whatsthis, entry (AstrometryRotatorThreshold), group (Align)
#. +> trunk5
#: kstars.kcfg:1853
#, kde-format
msgid "Threshold between measured and FITS position angles in arcminutes to consider the load and slew operation successful."
msgstr ""
#. i18n: ectx: label, entry (SolverType), group (Align)
#. +> trunk5
#: kstars.kcfg:1857
#, kde-format
msgid "Set solver type (online, offline, remote)."
msgstr ""
#. i18n: ectx: label, entry (SolverScopeType), group (Align)
#. +> trunk5
#: kstars.kcfg:1861
#, kde-format
msgid "Index of telescope type to be used when solving an image. 0 for Primary, 1 for Guide"
msgstr ""
#. i18n: ectx: label, entry (SolverGotoOption), group (Align)
#. +> trunk5
#: kstars.kcfg:1865
#, kde-format
msgid "Action to take if solver if successful (Sync, Slew to Target, or None)"
msgstr ""
#. i18n: ectx: label, entry (AstrometrySolverWCS), group (Align)
#. +> trunk5
#: kstars.kcfg:1869
#, kde-format
msgid "World Coordinate System (WCS). WCS is used to encode RA/DEC coordinates in captured CCD images."
msgstr ""
#. i18n: ectx: label, entry (AstrometrySolverOverlay), group (Align)
#. +> trunk5
#: kstars.kcfg:1873
#, kde-format
msgid "Display received FITS images unto solver FOV rectangle in the sky map."
msgstr ""
#. i18n: ectx: label, entry (AstrometryDifferentialSlewing), group (Align)
#. +> trunk5
#: kstars.kcfg:1877
#, kde-format
msgid "Do not use Sync when Slew to Target is selected. Use differential slewing to correct for discrepancies."
msgstr ""
#. i18n: ectx: label, entry (SolverAccuracyThreshold), group (Align)
#. +> trunk5
#: kstars.kcfg:1881
#, kde-format
msgid "Accuracy threshold in arcseconds between solution and target coordinates."
msgstr ""
#. i18n: ectx: label, entry (LockAlignFilterIndex), group (Align)
#. +> trunk5
#: kstars.kcfg:1885
#, kde-format
msgid "Use specified filter index when performing astrometry regardless of current filter settings."
msgstr ""
#. i18n: ectx: label, entry (AlignDarkFrame), group (Align)
#. +> trunk5
#: kstars.kcfg:1889
#, kde-format
msgid "Take a dark frame and subtract it before running astrometry operation."
msgstr ""
#. i18n: ectx: label, entry (SettlingTime), group (Align)
#. +> trunk5
#: kstars.kcfg:1893
#, kde-format
msgid "Time to wait in milliseconds after telescope slewing is complete before starting the next capture."
msgstr ""
#. i18n: ectx: label, entry (AstrometryUseNoFITS2FITS), group (Align)
#. +> trunk5
#: kstars.kcfg:1897
#, kde-format
msgid "Do not sanitize FITS. This option should only be checked if astrometry.net version is 0.67 or earlier. Uncheck for any versions greater than 0.67."
msgstr ""
#. i18n: ectx: label, entry (AstrometryImageScaleLow), group (Align)
#. +> trunk5
#: kstars.kcfg:1913
#, kde-format
msgid "Lower image scale."
msgstr ""
#. i18n: ectx: label, entry (AstrometryImageScaleHigh), group (Align)
#. +> trunk5
#: kstars.kcfg:1916
#, fuzzy, kde-format
#| msgid "Use images"
msgid "Upper image scale."
msgstr "Bruk bilder"
#. i18n: ectx: label, entry (AstrometryAutoUpdateImageScale), group (Align)
#. +> trunk5
#: kstars.kcfg:1919
#, kde-format
msgid "Automatically update image scale when CCD or Mount parameters are updated."
msgstr ""
#. i18n: ectx: label, entry (AstrometryImageScaleUnits), group (Align)
#. +> trunk5
#: kstars.kcfg:1923
#, kde-format
msgid "Image scale units in arcminutes (aw), degrees (dw), or arcsec per pixel (app)"
msgstr ""
#. i18n: ectx: label, entry (AstrometryDownsample), group (Align)
#. +> trunk5
#: kstars.kcfg:1931
#, fuzzy, kde-format
#| msgid "Scale factor"
msgid "Downsample factor"
msgstr "Skalafaktor"
#. i18n: ectx: label, entry (AstrometryAutoDownsample), group (Align)
#. +> trunk5
#: kstars.kcfg:1935
#, kde-format
msgid "Automatically downsample based on image size."
msgstr ""
#. i18n: ectx: label, entry (AstrometryPositionRA), group (Align)
#. +> trunk5
#: kstars.kcfg:1943
#, kde-format
msgid "User supplied Right Ascension value in degrees to be passed to the solver."
msgstr ""
#. i18n: ectx: label, entry (AstrometryPositionDE), group (Align)
#. +> trunk5
#: kstars.kcfg:1946
#, kde-format
msgid "User supplied declination value in degrees to be passed to the solver."
msgstr ""
#. i18n: ectx: label, entry (AstrometryAutoUpdatePosition), group (Align)
#. +> trunk5
#: kstars.kcfg:1949
#, kde-format
msgid "Automatically update position coordinates when mounts completes slewing."
msgstr ""
#. i18n: ectx: label, entry (AstrometryCustomOptions), group (Align)
#. i18n: ectx: label, entry (AstrometrySolverBinary), group (Align)
#. +> trunk5
#: kstars.kcfg:1964
#, kde-format
msgid "astrometry.net solve-field binary"
msgstr "Astrometry.net solve-field-program"
#. i18n: ectx: whatsthis, entry (AstrometrySolverBinary), group (Align)
#. +> trunk5
#: kstars.kcfg:1965
#, fuzzy, kde-format
msgid "Path to astrometry.net solver location."
msgstr "Park"
#. i18n: ectx: label, entry (AstrometryWCSInfo), group (Align)
#. +> trunk5
#: kstars.kcfg:1973
#, kde-format
msgid "astrometry.net wcsinfo binary"
msgstr "Astrometry.net wcsinfo-program"
#. i18n: ectx: whatsthis, entry (AstrometryWCSInfo), group (Align)
#. +> trunk5
#: kstars.kcfg:1974
#, fuzzy, kde-format
msgid "Path to astrometry.net wcsinfo location."
msgstr "Park"
#. i18n: ectx: label, entry (AstrometryConfFile), group (Align)
#. +> trunk5
#: kstars.kcfg:1982
#, kde-format
msgid "astrometry.net configuration file"
msgstr "Oppsettsfil for astrometry.net"
#. i18n: ectx: whatsthis, entry (AstrometryConfFile), group (Align)
#. +> trunk5
#: kstars.kcfg:1983
#, fuzzy, kde-format
msgid "Path to astrometry.net file location."
msgstr "Park"
#. i18n: ectx: label, entry (AstrometryConfFileIsInternal), group (Align)
#. +> trunk5
#: kstars.kcfg:1987
#, kde-format
msgid "Internal or External Astrometry.net Conf File?"
msgstr ""
#. i18n: ectx: label, entry (UseDefaultPython), group (Align)
#. +> trunk5
#: kstars.kcfg:1991
#, kde-format
msgid "Use the Default System Python Path"
msgstr ""
#. i18n: ectx: whatsthis, entry (PythonExecPath), group (Align)
#. +> trunk5
#: kstars.kcfg:1996
#, kde-format
msgid "Folder in which the desired python executable or link to be used for astrometry.net resides."
msgstr ""
#. i18n: ectx: label, entry (AstrometryAPIKey), group (Align)
#. +> trunk5
#: kstars.kcfg:2001
#, fuzzy, kde-format
#| msgid "Astrometry.net"
msgid "astrometry.net API Key"
msgstr "Astrometry.net"
#. i18n: ectx: whatsthis, entry (AstrometryAPIKey), group (Align)
#. +> trunk5
#: kstars.kcfg:2002
#, kde-format
msgid "Key to access astrometry.net online web services. You must register with astrometry.net to obtain a key."
msgstr ""
#. i18n: ectx: label, entry (AstrometryAPIURL), group (Align)
#. +> trunk5
#: kstars.kcfg:2006
#, fuzzy, kde-format
#| msgid "Astrometry.net"
msgid "astrometry.net API URL"
msgstr "Astrometry.net"
#. i18n: ectx: label, entry (AstrometryUseJPEG), group (Align)
#. +> trunk5
#: kstars.kcfg:2010
#, kde-format
msgid "Use JPEG format, instead of FITS, to upload images to the astrometry.net online service."
msgstr ""
#. i18n: ectx: label, entry (AstrometryTimeout), group (Align)
#. +> trunk5
#: kstars.kcfg:2014
#, fuzzy, kde-format
msgid "Timeout in seconds to wait for astrometry solver to complete."
msgstr "Park"
#. i18n: ectx: label, entry (PAHMountSpeedIndex), group (Align)
#. +> trunk5
#: kstars.kcfg:2018
#, kde-format
msgid "Speed index to set mount in Polar Alignment Assistant Tool."
msgstr ""
#. i18n: ectx: label, entry (PAHAutoPark), group (Align)
#. +> trunk5
#: kstars.kcfg:2022
#, kde-format
msgid "Automatically park the mount after Polar Alignment Assistant Tool is complete."
msgstr ""
#. i18n: ectx: label, entry (DefaultGuideCCD), group (Guide)
#. +> trunk5
#: kstars.kcfg:2028
#, kde-format
msgid "Default guide module CCD."
msgstr ""
#. i18n: ectx: label, entry (DefaultST4Driver), group (Guide)
#. +> trunk5
#: kstars.kcfg:2031
#, fuzzy, kde-format
#| msgid "Default Guider driver"
msgid "Default guide module ST4 Driver."
msgstr "Standard Guider-driver"
#. i18n: ectx: label, entry (GuideExposure), group (Guide)
#. +> trunk5
#: kstars.kcfg:2034
#, kde-format
msgid "Guider exposure duration in seconds."
msgstr ""
#. i18n: ectx: label, entry (GuiderType), group (Guide)
#. +> trunk5
#: kstars.kcfg:2038
#, kde-format
msgid "Which guider process to utilize for guiding (0 Internal Guider, 1 PHD2, 2 lin_guider)"
msgstr ""
#. i18n: ectx: label, entry (GuideAlgorithm), group (Guide)
#. +> trunk5
#: kstars.kcfg:2042
#, kde-format
msgid "Which Algorithm to use track guide square (0 smart, 1 fast, 2 threshold, 3 no threshold)."
msgstr ""
#. i18n: ectx: label, entry (PHD2Host), group (Guide)
#. +> trunk5
#: kstars.kcfg:2046
#, fuzzy, kde-format
#| msgid "Host name of the server"
msgid "Host name of external PHD2 service"
msgstr "Vertsnavn for tjeneren"
#. i18n: ectx: label, entry (PHD2Port), group (Guide)
#. +> trunk5
#: kstars.kcfg:2050
#, kde-format
msgid "PHD2 Event Monitoring Port"
msgstr ""
#. i18n: ectx: label, entry (LinGuiderHost), group (Guide)
#. +> trunk5
#: kstars.kcfg:2054
#, fuzzy, kde-format
#| msgid "Host name of the server"
msgid "Host name of external lin_guider service"
msgstr "Vertsnavn for tjeneren"
#. i18n: ectx: label, entry (LinGuiderPort), group (Guide)
#. +> trunk5
#: kstars.kcfg:2058
#, kde-format
msgid "Lin_guider Event Monitoring Port"
msgstr ""
#. i18n: ectx: label, entry (GuideScopeType), group (Guide)
#. +> trunk5
#: kstars.kcfg:2062
#, kde-format
msgid "Index of telescope type to be used when guiding. 0 for Primary, 1 for Guide"
msgstr ""
#. i18n: ectx: label, entry (CalibrationPulseDuration), group (Guide)
#. +> trunk5
#: kstars.kcfg:2066
#, kde-format
msgid "Pulse duration in milliseconds used for guiding pulses during calibration stage."
msgstr ""
#. i18n: ectx: label, entry (GuideSquareSizeIndex), group (Guide)
#. +> trunk5
#: kstars.kcfg:2070
#, kde-format
msgid "Guide square size index (0 to 4) corresponding to pixel sizes (8 to 128)."
msgstr ""
#. i18n: ectx: label, entry (ImageGuidingEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:2074
#, kde-format
msgid "Use Image Guiding algorithms instead of classical centroid guiding."
msgstr ""
#. i18n: ectx: label, entry (GuideRegionAxis), group (Guide)
#. +> trunk5
#: kstars.kcfg:2078
#, kde-format
msgid "Region Axis Index (0 to 4) corresponding to NxN partition size used Image Guiding (64 to 1024)."
msgstr ""
#. i18n: ectx: label, entry (GuideAutoStarEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:2082
#, fuzzy, kde-format
#| msgid "Automatically select a star to focus."
msgid "Automatically select calibration star and perform calibration."
msgstr "Velg automatisk en stjerne å fokusere på"
#. i18n: ectx: label, entry (GuideRemoteImagesEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:2090
#, kde-format
msgid "When using external guiders, enable reception of remote images in Ekos guide module. By default, remote images are disabled."
msgstr ""
#. i18n: ectx: label, entry (AutoModeIterations), group (Guide)
#. +> trunk5
#: kstars.kcfg:2094
#, kde-format
msgid "Number of automode iterations for calibration process."
msgstr ""
#. i18n: ectx: label, entry (GuideLostStarTimeout), group (Guide)
#. +> trunk5
#: kstars.kcfg:2098
#, kde-format
msgid "When star tracking is lost, wait this many seconds before aborting."
msgstr ""
#. i18n: ectx: label, entry (GuideMaxDeltaRMS), group (Guide)
#. +> trunk5
#: kstars.kcfg:2102
#, fuzzy, kde-format
msgid "Maximum delta RMS permitted while guiding before aborting."
msgstr "Park"
#. i18n: ectx: label, entry (TwoAxisEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:2106
#, kde-format
msgid "Use both axes to perform calibration."
msgstr ""
#. i18n: ectx: label, entry (RapidGuideEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:2110
#, kde-format
msgid "Use driver side Rapid Guide to perform guiding."
msgstr ""
#. i18n: ectx: label, entry (GuideDarkFrameEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:2114
#, kde-format
msgid "Take dark frame for autoguider images."
msgstr ""
#. i18n: ectx: label, entry (GuideSubframeEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:2118
#, kde-format
msgid "Subframe guide image around selected region"
msgstr ""
#. i18n: ectx: label, entry (DitherPixels), group (Guide)
#. +> trunk5
#: kstars.kcfg:2122
#, kde-format
msgid "How many pixels to move between subsequent exposures under auto dithering mode."
msgstr ""
#. i18n: ectx: label, entry (DitherFrames), group (Guide)
#. +> trunk5
#: kstars.kcfg:2126
#, kde-format
msgid "Dither after this many frames."
msgstr ""
#. i18n: ectx: label, entry (DitherThreshold), group (Guide)
#. +> trunk5
#: kstars.kcfg:2134
#, kde-format
msgid "Maximum distance (pixels) for guiding to be considered settled."
msgstr ""
#. i18n: ectx: label, entry (DitherTimeout), group (Guide)
#. +> trunk5
#: kstars.kcfg:2138
#, kde-format
msgid "Time limit (seconds) on dithering to settle down."
msgstr ""
#. i18n: ectx: label, entry (DitherMaxIterations), group (Guide)
#. +> trunk5
#: kstars.kcfg:2142
#, kde-format
msgid "How many dithering attempts to undertake before giving up."
msgstr ""
#. i18n: ectx: label, entry (DitherNoGuidingPulse), group (Guide)
#. +> trunk5
#: kstars.kcfg:2146
#, kde-format
msgid "Pulse length in milliseconds used for non-guiding dither."
msgstr ""
#. i18n: ectx: label, entry (DitherFailAbortsAutoGuide), group (Guide)
#. +> trunk5
#: kstars.kcfg:2150
#, kde-format
msgid "If dithering fails then abort autoguide."
msgstr ""
#. i18n: ectx: label, entry (DitherEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:2154
#, kde-format
msgid "Use Auto Dithering when guiding."
msgstr ""
#. i18n: ectx: label, entry (DitherNoGuiding), group (Guide)
#. +> trunk5
#: kstars.kcfg:2158
#, kde-format
msgid "Perform dithering even when not guiding."
msgstr ""
#. i18n: ectx: label, entry (AOLimit), group (Guide)
#. +> trunk5
#: kstars.kcfg:2162
#, kde-format
msgid "The Adaptive Optics unit is utilized if the guiding deviation is less than this limit in arcseconds. Once exceeded, mechanical guiding is utilized."
msgstr ""
#. i18n: ectx: label, entry (RAGuideEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:2166
#, kde-format
msgid "Enable autoguiding in the RA axis."
msgstr ""
#. i18n: ectx: label, entry (DECGuideEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:2170
#, kde-format
msgid "Enable autoguiding in the DEC axis."
msgstr ""
#. i18n: ectx: label, entry (NorthDECGuideEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:2174
#, kde-format
msgid "Enable North autoguiding in the DEC axis."
msgstr ""
#. i18n: ectx: label, entry (SouthDECGuideEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:2178
#, kde-format
msgid "Enable South autoguiding in the DEC axis."
msgstr ""
#. i18n: ectx: label, entry (EastRAGuideEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:2182
#, kde-format
msgid "Enable East autoguiding in the RA axis."
msgstr ""
#. i18n: ectx: label, entry (WestRAGuideEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:2186
#, kde-format
msgid "Enable West autoguiding in the RA axis."
msgstr ""
#. i18n: ectx: label, entry (GuiderAccuracyThreshold), group (Guide)
#. +> trunk5
#: kstars.kcfg:2223
#, kde-format
msgid "Accuracy threshold for the Guide Graphs."
msgstr ""
#. i18n: ectx: label, entry (RADisplayedOnGuideGraph), group (Guide)
#. +> trunk5
#: kstars.kcfg:2227
#, kde-format
msgid "Display the RA Plot on the Guide Drift Graphics."
msgstr ""
#. i18n: ectx: label, entry (DEDisplayedOnGuideGraph), group (Guide)
#. +> trunk5
#: kstars.kcfg:2231
#, kde-format
msgid "Display the DEC Plot on the Guide Drift Graphics."
msgstr ""
#. i18n: ectx: label, entry (RACorrDisplayedOnGuideGraph), group (Guide)
#. +> trunk5
#: kstars.kcfg:2235
#, kde-format
msgid "Display the RA Corrections Plot on the Guide Drift Graphics."
msgstr ""
#. i18n: ectx: label, entry (DECorrDisplayedOnGuideGraph), group (Guide)
#. +> trunk5
#: kstars.kcfg:2239
#, kde-format
msgid "Display the DEC Corrections Plot on the Guide Drift Graphics."
msgstr ""
#. i18n: ectx: whatsthis, entry (SchedulerLogging), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2245
#, fuzzy, kde-format
msgid "Log Ekos Scheduler Module activity."
msgstr "Park"
#. i18n: ectx: whatsthis, entry (SortSchedulerJobs), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2249
#, kde-format
msgid "Sort scheduler jobs by priority and altitude."
msgstr ""
#. i18n: ectx: label, entry (StopEkosAfterShutdown), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2253
#, kde-format
msgid "After shutdown procedure is successfully executed, shutdown INDI and Ekos."
msgstr ""
#. i18n: ectx: label, entry (ShutdownScriptTerminatesINDI), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2257
#, kde-format
msgid "Whether shutdown script, if exists, terminates INDI server in the process."
msgstr ""
#. i18n: ectx: label, entry (PreemptiveShutdown), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2261
#, kde-format
msgid "Perform pre-emptive shutdown if no jobs are due for a number of hours."
msgstr ""
#. i18n: ectx: label, entry (ResetMountModelOnAlignFail), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2265
#, fuzzy, kde-format
msgid "Reset mount model in case of alignment failure."
msgstr "Park"
#. i18n: ectx: label, entry (ResetMountModelBeforeJob), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2269
#, fuzzy, kde-format
msgid "Reset mount model before starting each job."
msgstr "Park"
#. i18n: ectx: label, entry (ResetGuideCalibration), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2273
#, fuzzy, kde-format
msgid "Always Reset guiding calibration before starting each job."
msgstr "Park"
#. i18n: ectx: label, entry (RealignAfterCalibrationFailure), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2277
#, kde-format
msgid "If guiding calibration fails, run alignment process again before proceeding to recalibration."
msgstr ""
#. i18n: ectx: label, entry (PreemptiveShutdownTime), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2281
#, kde-format
msgid "Maximum number of hours before the next job is due to trigger a pre-emptive shutdown."
msgstr ""
#. i18n: ectx: label, entry (RememberJobProgress), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2285
#, kde-format
msgid "When processing a scheduled job, resume the sequence starting from the last image present in storage."
msgstr ""
#. i18n: ectx: label, entry (LeadTime), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2289
#, fuzzy, kde-format
#| msgid "Minimum time between uploads (in minutes):"
msgid "Minimum time between jobs in minutes."
msgstr "Minimum tid mellom opplastinger (i minutter):"
#. i18n: ectx: label, entry (PreDawnTime), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2293
#, kde-format
msgid "Do not permit jobs to be scheduled or executed past this many minutes before dawn."
msgstr ""
#. i18n: ectx: label, entry (SettingAltitudeCutoff), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2297
#, kde-format
msgid "Do not permit jobs to be scheduled less than this many degrees before the altitude restriction. Actual execution proceeds until the altitude limit."
msgstr ""
#. i18n: ectx: label, entry (TelescopeFocalLength), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2301
#, fuzzy, kde-format
#| msgid "Telescope focal length, in millimeters"
msgid "Telescope focal length in millimeters."
msgstr "Teleskopets brennvidde, i mm"
#. i18n: ectx: label, entry (CameraPixelWidth), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2305
#, kde-format
msgid "Camera pixel size width in micrometers."
msgstr ""
#. i18n: ectx: label, entry (CameraPixelHeight), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2309
#, kde-format
msgid "Camera pixel size height in micrometers."
msgstr ""
#. i18n: ectx: label, entry (CameraWidth), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2313
#, kde-format
msgid "Camera Width in pixels."
msgstr ""
#. i18n: ectx: label, entry (CameraHeight), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2317
#, kde-format
msgid "Camera Height in pixels."
msgstr ""
#. i18n: ectx: label, entry (CameraRotation), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2321
#, kde-format
msgid "Position angle of the camera with respect to north."
msgstr ""
#. i18n: ectx: label, entry (ErrorHandlingStrategy), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2325
#, kde-format
msgid "Strategy how to react, when a job aborts or steps into an error."
msgstr ""
#. i18n: ectx: label, entry (ErrorHandlingStrategyDelay), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2329
#, kde-format
msgid "Delay in minutes how long the scheduler should pause before restarting an aborted job or a job that ran into an error."
msgstr ""
#. i18n: ectx: label, entry (RescheduleErrors), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2333
#, kde-format
msgid "Re-schedule jobs that ran into errors."
msgstr ""
#. i18n: ectx: label, entry (LastServer), group (INDI Lite)
#. +> trunk5
#: kstars.kcfg:2339
#, kde-format
msgid "The address of last used server"
msgstr ""
#. i18n: ectx: label, entry (LastServerPort), group (INDI Lite)
#. +> trunk5
#: kstars.kcfg:2342
#, kde-format
msgid "The port of last used server"
msgstr ""
#. i18n: ectx: label, entry (LastWebManagerPort), group (INDI Lite)
#. +> trunk5
#: kstars.kcfg:2346
#, kde-format
msgid "The port of last used Web Manager"
msgstr ""
#. i18n: ectx: label, entry (HIPSMemoryCache), group (HIPS)
#. +> trunk5
#: kstars.kcfg:2352
#, kde-format
msgid "RAM cache size in MB used to store cached HIPS images."
msgstr ""
#. i18n: ectx: label, entry (HIPSNetCache), group (HIPS)
#. +> trunk5
#: kstars.kcfg:2356
#, kde-format
msgid "Hard disk cache size in MB used to store cached HIPS images."
msgstr ""
#. i18n: ectx: label, entry (HIPSSource), group (HIPS)
#. +> trunk5
#: kstars.kcfg:2360
#, kde-format
msgid "HIPS source catalog title."
msgstr ""
#. i18n: ectx: label, entry (HIPSBiLinearInterpolation), group (HIPS)
#. +> trunk5
#: kstars.kcfg:2364
#, kde-format
msgid "Use Bilinear interpolation when rendering HiPS images?"
msgstr ""
#. i18n: ectx: label, entry (HIPSShowGrid), group (HIPS)
#. +> trunk5
#: kstars.kcfg:2368
#, kde-format
msgid "Show HiPS grid on the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowHIPS), group (HIPS)
#. +> trunk5
#: kstars.kcfg:2372
#, fuzzy, kde-format
#| msgid "Draw stars in the sky map?"
msgid "Draw HiPS sources in the sky map?"
msgstr "Tegne stjerner på himmelkartet?"
#. i18n: ectx: whatsthis, entry (ShowHIPS), group (HIPS)
#. +> trunk5
#: kstars.kcfg:2373
#, fuzzy, kde-format
#| msgid "Toggle whether stars are drawn in the sky map."
msgid "Toggle whether the HIPS sources are drawn in the sky map."
msgstr "Betem om stjerner blir tegnet på himmelkartet."
#. i18n: ectx: label, entry (warningActionsActive), group (Observatory)
#. +> trunk5
#: kstars.kcfg:2379
#, kde-format
msgid "Will be reacted upon warnings?"
msgstr ""
#. i18n: ectx: label, entry (alertActionsActive), group (Observatory)
#. +> trunk5
#: kstars.kcfg:2383
#, kde-format
msgid "Will be reacted upon alerts?"
msgstr ""
#. i18n: ectx: label, entry (weatherWarningCloseDome), group (Observatory)
#. +> trunk5
#: kstars.kcfg:2387
#, kde-format
msgid "Shall the dome being closed when a weather warning occurs?"
msgstr ""
#. i18n: ectx: label, entry (weatherWarningCloseShutter), group (Observatory)
#. +> trunk5
#: kstars.kcfg:2391
#, kde-format
msgid "Shall the shutter being closed when a weather warning occurs?"
msgstr ""
#. i18n: ectx: label, entry (weatherWarningStopScheduler), group (Observatory)
#. i18n: ectx: label, entry (weatherAlertCloseShutter), group (Observatory)
#. i18n: ectx: label, entry (weatherAlertStopScheduler), group (Observatory)
"<p>The ICC profiles folder seems to be invalid.</p>"
"<p>If you want to try setting it again, choose \"Yes\" here, otherwise choose \"No\", and the \"Color Management\" feature will be disabled until you solve this issue.</p>"
msgstr ""
"<p>Mappa til ICC-profilen er ikke gyldig.</p>"
"<p>Hvis du vil velge ny mappe, velg «Ja», og velg «Nei» hvis ikke. I så fall slås fargestyringen av til du retter opp dette.</p>"
msgid "Edit album properties and collection information."
msgstr "Rediger album- og samlingsinformasjon."
#. +> trunk5
#: core/app/main/digikamapp_setup.cpp:231
#, fuzzy, kde-format
#| msgid "Write metadata to file"
msgid "Write Metadata to Files"
msgstr "Skriv metadata til fil"
#. +> trunk5
#: core/app/main/digikamapp_setup.cpp:232
#: core/app/main/digikamapp_setup.cpp:389
#, fuzzy, kde-format
#| msgid "Updates metadata of images in the current album with the contents of digiKam database (image metadata will be overwritten with data from the database)."
msgid "Updates metadata of files in the current album with the contents of digiKam database (file metadata will be overwritten with data from the database)."
msgstr "Oppdaterer metadata for bilder i gjeldende album med digiKams databaseinnhold (bildenes metadata skrives over med data fra databasen)."
#. +> trunk5
#: core/app/main/digikamapp_setup.cpp:241
#, fuzzy, kde-format
#| msgid "Reread Metadata From Images"
msgid "Reread Metadata From Files"
msgstr "Les metadata fra bildene igjen"
#. +> trunk5
#: core/app/main/digikamapp_setup.cpp:242
#: core/app/main/digikamapp_setup.cpp:400
#, kde-format
msgid "Updates the digiKam database from the metadata of the files in the current album (information in the database will be overwritten with data from the files' metadata)."
msgstr "Oppdaterer digiKamdatabasen fra metadata til filene i gjeldende album (informasjon i databasen blir overskrevet med data fra filenes metadata)."
msgid "Open camera dialog for the device with Solid UDI <udi>"
msgstr "Åpne kameradialogvinduet for enheter med Solid UDI <udi>"
#. +> trunk5
#: core/app/main/main.cpp:127
#, kde-format
msgid "Automatically detect and open a connected gphoto2 camera"
msgstr "Gphoto2-kamera oppdages automatisk og åpnes"
#. +> trunk5
#: core/app/main/main.cpp:129
#, kde-format
msgid "Start digikam with the SQLite database file found in the directory <dir>"
msgstr "Start digikam med SQLite-databasefilen som finnes i mappa <dir>"
#. +> trunk5
#: core/app/main/main.cpp:132
#, fuzzy, kde-format
#| msgid "Name of the configuration file"
msgid "Start digikam with the configuration file <config>"
msgstr "Navn på oppsettsfila"
#. +> trunk5
#: core/app/main/main.cpp:152
#, fuzzy, kde-format
#| msgid ""
#| "Run-time Qt4 SQLite or MySQL database plugin is not available - please install it.\n"
#| "There is no database plugin installed on your computer."
msgid ""
"Run-time Qt SQLite or MySQL database plugin is not available. please install it.\n"
"There is no database plugin installed on your computer."
msgstr ""
"Programtillegget for Qt4 SQLite eller MySQL database er ikke tilgjengelig. Vennligst installer det.\n"
"Det er ikke installert noe programtillegg for databaser på maskinen din."
#. +> trunk5
#: core/app/main/main.cpp:161
#, fuzzy, kde-format
#| msgid ""
#| "Run-time Qt4 SQLite or MySQL database plugin is not available - please install it.\n"
#| "Database plugins installed on your computer are listed below:"
msgid ""
"Run-time Qt SQLite or MySQL database plugin are not available. Please install it.\n"
"Database plugins installed on your computer are listed below."
msgstr ""
"Programtillegget for Qt4 SQLite eller MySQL database er ikke tilgjengelig. Vennligst installer det!\n"
"Følgende programtillegg for databaser er installert:"
#. +> trunk5
#: core/app/main/main.cpp:198
#, kde-format
msgid "<p>The given path for the config file is not valid. Either its parent directory does not exist, it is a directory itself or it cannot be read/written to.</p>"
msgid "If you press this button, the dates selected on the time-line will be saved to a new search virtual Album using the name set on the left."
msgstr "Hvis du trykker på denne knappen, kommer de datoene du har valgt fra tidslinjen til å bli lagret i et nytt søk i virtuelle album med navnet oppgitt til venstre."
#| msgid_plural "Are you sure you want to open %1 items?"
msgid "Are you sure you want to restore %1 item?"
msgid_plural "Are you sure you want to restore %1 items?"
msgstr[0] "Er du sikker på at du vil åpne ett element?"
msgstr[1] "Er du sikker på at du vil åpne %1 elementer?"
#. +> trunk5
#: core/app/views/stack/trashview.cpp:263
#, kde-format
msgid "Confirm Restore"
msgstr ""
#. +> trunk5
#: core/app/views/stack/trashview.cpp:311
#: core/app/views/stack/trashview.cpp:357
#, fuzzy, kde-format
#| msgid "Confirm Delete"
msgid "Confirm Deletion"
msgstr "Bekreft sletting"
#. +> trunk5
#: core/app/views/stack/trashview.cpp:312
#, fuzzy, kde-format
#| msgid "Are you sure you want to delete this property?"
msgid "Are you sure you want to delete %1 item permanently?"
msgid_plural "Are you sure you want to delete %1 items permanently?"
msgstr[0] "Er du sikker på at du vil fjerne denne verdien?"
msgstr[1] "Er du sikker på at du vil fjerne denne verdien?"
#. +> trunk5
#: core/app/views/stack/trashview.cpp:358
#, fuzzy, kde-format
#| msgid "Are you sure you want to delete this property?"
msgid "Are you sure you want to delete ALL items permanently?"
msgstr "Er du sikker på at du vil fjerne denne verdien?"
#. +> trunk5
-#: core/app/views/stack/welcomepageview.cpp:134
+#: core/app/views/stack/welcomepageview.cpp:135
#, kde-format
msgid "Image Editor: Add Web services Import and Export tools;"
msgstr ""
#. +> trunk5
-#: core/app/views/stack/welcomepageview.cpp:135
+#: core/app/views/stack/welcomepageview.cpp:136
#, kde-format
msgid "Showfoto: Add Web services Import and Export tools;"
msgstr ""
#. +> trunk5
-#: core/app/views/stack/welcomepageview.cpp:136
+#: core/app/views/stack/welcomepageview.cpp:137
#, kde-format
msgid "Light Table: Add Web services Import and Export tools;"
msgstr ""
#. +> trunk5
-#: core/app/views/stack/welcomepageview.cpp:137
+#: core/app/views/stack/welcomepageview.cpp:138
#, kde-format
msgid "New video metadata parser based on ffmpeg to populate database;"
msgstr ""
#. +> trunk5
-#: core/app/views/stack/welcomepageview.cpp:138
+#: core/app/views/stack/welcomepageview.cpp:139
#, kde-format
msgid "Add video support to find files based on properties registered on database."
msgstr ""
#. +> trunk5
-#: core/app/views/stack/welcomepageview.cpp:139
+#: core/app/views/stack/welcomepageview.cpp:140
#, kde-format
msgid "Similarity database has been moved to a dedicated file to not bloat core database with computed finger-prints. This will speed-up query in core database in case of Similarity feature is used."
msgstr ""
#. +> trunk5
-#: core/app/views/stack/welcomepageview.cpp:141
+#: core/app/views/stack/welcomepageview.cpp:142
#, kde-format
msgid "Add possibility to merge tags by drag & drop."
msgstr ""
#. +> trunk5
-#: core/app/views/stack/welcomepageview.cpp:142
+#: core/app/views/stack/welcomepageview.cpp:143
#, kde-format
msgid "HTML Gallery: New Vanilla theme to emulate export to HTML from Adobe LightRoom."
msgstr ""
#. +> trunk5
-#: core/app/views/stack/welcomepageview.cpp:143
+#: core/app/views/stack/welcomepageview.cpp:144
#, kde-format
msgid "HTML Gallery: New Blue Frame theme."
msgstr ""
#. +> trunk5
-#: core/app/views/stack/welcomepageview.cpp:146
+#: core/app/views/stack/welcomepageview.cpp:147
#, kde-format
msgid "...and much more."
msgstr "… og mye mer."
#. +> trunk5
-#: core/app/views/stack/welcomepageview.cpp:152
+#: core/app/views/stack/welcomepageview.cpp:153
#, kde-format
msgid ""
"<li>%1</li>"
"\n"
msgstr ""
"<li>%1</li>"
"\n"
#. +> trunk5
-#: core/app/views/stack/welcomepageview.cpp:155
+#: core/app/views/stack/welcomepageview.cpp:156
#, fuzzy, kde-format
#| msgid "Client Features"
msgid "New Features"
msgstr "Klientegenskaper"
#. +> trunk5
-#: core/app/views/stack/welcomepageview.cpp:157
+#: core/app/views/stack/welcomepageview.cpp:158
#, fuzzy, kde-format
#| msgid "<h3>%1</h3>"
msgid ""
"<h3>%1</h3>"
"<ul>%2</ul>"
msgstr "<h3>%1</h3>"
#. +> trunk5
-#: core/app/views/stack/welcomepageview.cpp:158
+#: core/app/views/stack/welcomepageview.cpp:159
#, fuzzy, kde-format
#| msgid ""
#| "<p>Some of the new features in this release of KMail include (compared to KMail %1, which is part of KDE Software Compilation %2):</p>"
#| "\n"
msgid "Some of the new features in this release of digiKam include (compared to digiKam 5.x):"
msgstr ""
"<p> Denne versjonen av KMail inneholder blant annet dette (i forhold til KMail %1, som er en del av KDE Software Compilation %2):</p>"
"\n"
#. +> trunk5
-#: core/app/views/stack/welcomepageview.cpp:167
+#: core/app/views/stack/welcomepageview.cpp:168
#, kde-format
msgid "About"
msgstr "Om"
#. +> trunk5
-#: core/app/views/stack/welcomepageview.cpp:169
+#: core/app/views/stack/welcomepageview.cpp:170
#, kde-format
msgid ""
"<h3>%1</h3>"
"<h3>%2</h3>"
"<ul>%3</ul>"
msgstr ""
#. +> trunk5
-#: core/app/views/stack/welcomepageview.cpp:170
+#: core/app/views/stack/welcomepageview.cpp:171
#, kde-format
msgid "digiKam is an open source photo management program designed to import, organize, enhance, search and export your digital images to and from your computer."
msgstr ""
#. +> trunk5
-#: core/app/views/stack/welcomepageview.cpp:171
+#: core/app/views/stack/welcomepageview.cpp:172
#, kde-format
msgid "Currently, you are in the Album view mode of digiKam. Albums are the places where your files are stored, and are identical to the folders on your hard disk."
msgstr ""
#. +> trunk5
-#: core/app/views/stack/welcomepageview.cpp:172
+#: core/app/views/stack/welcomepageview.cpp:173
#, kde-format
msgid ""
"<li>%1</li>"
"<li>%2</li>"
msgstr ""
#. +> trunk5
-#: core/app/views/stack/welcomepageview.cpp:173
+#: core/app/views/stack/welcomepageview.cpp:174
#, kde-format
msgid "digiKam has many powerful features which are described in the <a href=\"https://docs.kde.org/trunk5/en/extragear-graphics/digikam/index.html\">documentation</a>"
msgstr ""
#. +> trunk5
-#: core/app/views/stack/welcomepageview.cpp:174
+#: core/app/views/stack/welcomepageview.cpp:175
#, kde-format
msgid "The <a href=\"https://www.digikam.org\">digiKam homepage</a> provides information about new versions of digiKam."
"<p>This Batch Queue Manager tool can convert images data to JPEG-2000 format.</p>"
"<p>This is an image compression standard and coding system. It was created by the Joint Photographic Experts Group committee in 2000 with the intention of superseding their original discrete cosine transform-based JPEG standard (created in 1992) with a newly designed, wavelet-based method.</p>"
"<p>See details about this format from <a href='https://en.wikipedia.org/wiki/JPEG_2000'>this page</a>.</p>"
"<p>This Batch Queue Manager tool can convert images data to JPEG format.</p>"
"<p>The Joint Photographic Experts Group format is a commonly used method of lossy compression for digital images, particularly for those images produced by digital photography.</p>"
"<p>See details about this format from <a href='https://en.wikipedia.org/wiki/JPEG'>this page</a>.</p>"
msgid "<b>If conversion to PNG fails, this may be due to the color profile check. Simply insert the tool for color profile conversion before this tool and select the desired color profile.</b>"
"<p>This Batch Queue Manager tool can convert images data to TIFF format.</p>"
"<p>The Tagged Image File Format is a computer file format for storing raster graphics images, popular among graphic artists, the publishing industry, and photographers.</p>"
"<p>See details about this format from <a href='https://en.wikipedia.org/wiki/TIFF'>this page</a>.</p>"
msgid "Enter script for execution. Use $INPUT and $OUTPUT for input / output filenames (with special characters escaped). These would be substituted before shell execution."
msgid "When you choose to have the watermark repeated randomly, many times in the placement combo box, you can specify here whether the repetition, you can check this to make the watermark rotations random also [0, 90, 180, 270]"
msgid "Use this to get more control over the sparsity of watermark repetition. The higher the value the sparser the watermarks get. Use floating point values, typically between 1.0 and 3.0. It can also be less than 1.0"
msgid "A smoothness of 0 has no effect, 1 and above determine the Gaussian blur matrix radius that determines how much to blur the image."
msgstr "En utjevning på 0 har ingen virkning, mens verdier på 1 og over avgjør radien i den gaussiske uklarhetsmatrise som igjen avgjør hvor uklart bildet blir."
msgid "With this button, you can pick the color from the original image used to set <b>Shadow Tone</b> input levels on the Red, Green, Blue, and Luminosity channels."
msgstr "Trykk på denne knappen for å velge fargen fra det opprinnelige bildet som skal brukes til å velge inndataverdier for nivåene i <b>skyggetoner</b> til kanalene for rødt, grønt, blått og lysstyrke."
msgid "With this button, you can pick the color from the original image used to set <b>Middle Tone</b> input levels on the Red, Green, Blue, and Luminosity channels."
msgstr "Trykk på denne knappen for å velge fargen fra det opprinnelige bildet som skal brukes til å velge inndataverdier for nivåene i <b>mellomtoner</b> til kanalene for rødt, grønt, blått og lysstyrke."
msgid "With this button, you can pick the color from the original image used to set <b>Highlight Tone</b> input levels on the Red, Green, Blue, and Luminosity channels."
msgstr "Trykk på denne knappen for å velge fargen fra det opprinnelige bildet som skal brukes til å velge inndataverdier for nivåene i <b>lyse fargetoner</b> til kanalene for rødt, grønt, blått og lysstyrke."
"<p>This option maximizes the tonal range in the Red, Green, and Blue channels. It searches the image shadow and highlight limit values and adjusts the Red, Green, and Blue channels to a full histogram range.</p>"
msgstr ""
"<b>Autonivåer</b>:"
"<p> Med dette alternativet gjøres fargetone-området størst mulig i rød, grønn og blå kanal. Det søkes etter bildets grenseverdier for skygge og lyse toner og rød, grønn og blå kanal justeres til fullt histogram-område.</p>"
"<p>This option scales brightness values across the active image so that the darkest point becomes black, and the brightest point becomes as bright as possible without altering its hue. This is often a \"magic fix\" for images that are dim or washed out.</p>"
msgstr ""
"<b>Normaliser</b>:"
"<p>Skalerer lysstyrken i alle punktene på bildet, slik at det mørkeste punktet blir helt svart, og det lyseste punktet blir så lyst som mulig uten å endre fargenyansen. Dette verker ofte bra på bilder som er for mørke eller bleke.</p>"
"<p>This option adjusts the brightness of colors across the active image so that the histogram for the value channel is as nearly as possible flat, that is, so that each possible brightness value appears at about the same number of pixels as each other value. Sometimes Equalize works wonderfully at enhancing the contrasts in an image. Other times it gives garbage. It is a very powerful operation, which can either work miracles on an image or destroy it.</p>"
msgstr ""
"<b>Jevn ut</b>:"
"<p>Endrer lysstyrken i alle punktene på bildet, slik at lysstyrkehistogrammet er så flatt som mulig. Dette vil si at alle lysstyrkeverdiene er brukt omtrent like mange ganger. En slik utjevning kan forbedre kontrastene i bildet, men kan også ødelegge det helt. Hvor godt utjevningen virker er helt avhengig av bildet du bruker.</p>"
"<p>This option enhances the contrast and brightness of the RGB values of an image by stretching the lowest and highest values to their fullest range, adjusting everything in between.</p>"
msgstr ""
"<b>Strekk kontrast</b>: "
"<p>Forbedrer kontrasten og lysstyrken til RGB-verdiene i et bildet ved å strekke laveste og høyeste verdi ut, slik at de favner om alle mulige verdier. Mellomverdier justeres tilsvarende.</p>"
"<p>This option enhances the contrast and brightness of the RGB values of an image to calculate optimal exposition and black level using image histogram properties.</p>"
msgstr ""
"<b>Automatisk eksponering</b>:"
"<p>Forbedrer kontrasten og lysstyrken til RGB-verdiene i et bilde ved å regne ut optimal eksponeringsverdi og svartnivå ved hjelp av bildehistogrammet.</p>"
msgid "With this button, you can pick the color of the orange mask of the scanned color negative. It represents white point of the negative, or the darkest black tone of the positive image after inversion. It is also the reference point for applying the film profile."
msgstr "Med denne knappen kan du plukke fargen til den oransje masken i det skannede fargenegativet. Det representerer hvitpunktet for negativet, eller den mørkeste svarte tonen i det positive bildet etter invertering. Det er også referansepiunkt for bruk av filmprofilen."
msgid "If you press this button, the white point is calculated from the image data automatically. This function requires to have some residual orange mask around the exposed area of the negative."
msgstr "Hvis du trykker denne knappen blir hvitpunktet beregnet automatisk ut fra bildedataene. Denne funksjonen trenger å ha litt gjenstående orange maske rundt det eksponerte feltet på negativet."
msgid "Move the slider to higher values until maximum brightness is achieved without clipping any color channel. Use the output histogram to evaluate each channel."
msgstr "Flytt glidebryteren til høyere verdier inntil største lysstyrke blir oppnådd uten å klippe noen av fargekanalene. Bruk resultathistogrammet til å evaluere hver kanal."
msgid "A percent of 0 has no effect, values above 0 represent a factor for mixing the destination color with source color this is done radially i.e. the inner part of the brush radius is totally from source and mixing with destination is done gradually till the outer part of the circle."
"* Press s to switch to source-selection mode, and select source point on image.\n"
"* Press s again and start cloning.\n"
"* Press [ and ] to change brush size.\n"
"* Press CTRL+Mousewheel to zoom in/out.\n"
"* Press m to pan the image if image is larger than viewport.\n"
"* Press l to start lasso mode. Start drawing lasso boundary either continuously or discretely, then double-click or press l again to close the boundary.\n"
"* Inside lasso mode, you can clone only inside the lasso region.\n"
"<p>Select the blurring effect to apply to image.</p>"
"<p><b>Zoom Blur</b>: blurs the image along radial lines starting from a specified center point. This simulates the blur of a zooming camera.</p>"
"<p><b>Radial Blur</b>: blurs the image by rotating the pixels around the specified center point. This simulates the blur of a rotating camera.</p>"
"<p><b>Far Blur</b>: blurs the image by using far pixels. This simulates the blur of an unfocalized camera lens.</p>"
"<p><b>Motion Blur</b>: blurs the image by moving the pixels horizontally. This simulates the blur of a linear moving camera.</p>"
"<p><b>Softener Blur</b>: blurs the image softly in dark tones and hardly in light tones. This gives images a dreamy and glossy soft focus effect. It is ideal for creating romantic portraits, glamour photographs, or giving images a warm and subtle glow.</p>"
"<p><b>Shake Blur</b>: blurs the image by shaking randomly the pixels. This simulates the blur of a random moving camera.</p>"
"<p><b>Focus Blur</b>: blurs the image corners to reproduce the astigmatism distortion of a lens.</p>"
"<p><b>Smart Blur</b>: finds the edges of color in your image and blurs them without muddying the rest of the image.</p>"
"<p><b>Frost Glass</b>: blurs the image by randomly disperse light coming through a frosted glass.</p>"
"<p><b>Mosaic</b>: divides the photograph into rectangular cells and then recreates it by filling those cells with average pixel value.</p>"
msgstr ""
"<p>Velg hvilken type uklarhet du vil bruke på bildet.</p>"
"<p><b>Skalering</b>: Gjør bildet uklart langs radiale linjer utifra et bestemt midtpunkt.Dette etterligner uklarhet fra et kamera som zoomer.</p>"
"<p><b>Radial</b>: Gjør bildet uklart ved å snurre pikslene rundt et bestemt midtpunkt. Dette etterligner uklarhet som lages av et kamera som snurres rundt når bildet tas.</p>"
"<p><b>Fjern</b>: Gjør bildet uklart ved å bruke fjerne piksler. Dette etterligner virkningen av et ufokusert kamera.</p>"
"<p><b>Bevegelse</b>: Gjør bildet uklart ved å flytte pikslene vannrett.Dette etterligner virkningen av et kamera som beveges bortetter.</p>"
"<p><b>Mykner</b>: Gjør bildet mykere i de mørke tonene, og nesten ikke i de lyse. Dette gir bildet et drømmende og mykt uttrykk. Dette er egnet til å lage romantiske portretter, glamour-fotos eller til å gi bildet en svak, varm glød.</p>"
"<p><b>Risting</b>: Gjør bildet uklart ved å riste om på pikslene. Dette etterlikner uskarpheten av et kamera i tilfeldig bevegelse.</p>"
"<p><b>Fokus</b>: Gjør hjørnene uklare. Dette etterligner astigmatisk linseforvrengning.</p>"
"<p><b>Smart</b>: Finner fargekanter i bildet og gjør dem uklare uten å grumse til resten av bildet.</p>"
"<p><b>Is på ruten</b>: Gjør bildet uklart ved å tilfeldig spre lys som kommer gjennom en isbelagt rute.</p>"
"<p><b>Mosaikk</b>: Deler bildet opp i rektangulære celler og bygger det opp igjen ved å fylle cellene med gjennomsnittlig pikselverdi.</p>"
"<p>Note: if you have previously selected an area in the editor, this will be unaffected by the filter. You can use this method to disable the Raindrops effect on a human face, for example.</p>"
msgstr ""
"Her forhåndsvises virkningen av regndråpene."
"<p>Merk: Hvis du fra før har valgt et område i bilderedigeringen forblir dette upåvirket av filteret, Bruk denne metoden for unngå regndråper i et ansikt for eksempel.</p>"
msgid "<p>This Image Editor tool can crop automatically an image by detection of inner black border, generated while panorama stitching for example.</p>"
msgstr "Et verktøy for å flette sammen bilder med bracketing"
msgid "Click on this button to draw zones marking which areas of the image are less important. These zones will be deleted when reducing the picture, or duplicated when enlarging the picture."
msgstr "Trykk denne knappen for å tegne soner som merker hvilke områder av bildet som er mindre viktige. Disse sonene vil bli slettet når bildet forminskes, eller duplisert når bildet forstørres,"
msgid "Use this value to give a negative bias to the seams which are not straight. May be useful to prevent distortions in some situations, or to avoid artifacts from pixel skipping (it is better to use low values in such case). This setting applies to the whole selected layer if no rigidity mask is used. Note: the bias is proportional to the difference in the transversal coordinate between each two successive points, elevated to the power of 1.5, and summed up for the whole seam."
msgstr "Bruk denne verdien for å legge negativ vekt på sømmer som ikke er rette. Kan være nyttig for å forebygge forvrengninger i noen situasjoner, eller unngå artefakter fra utelating av piksler (i slike tilfeller er det bedre å bruke lave verdier). Denne innstillingen brukes på hele det valgte laget hvis det ikke er brukt noen stivhetsmaske. Merk: vekten er proporsjonal med forskjellen i transvers koordinat mellom to etterfølgende punkter, opphøyd i 1.5, og summert for hele sømmen."
msgid "This option lets you choose the maximum transversal step that the pixels in the seams can take. In the standard algorithm, corresponding to the default value step = 1, each pixel in a seam can be shifted by at most one pixel with respect to its neighbors. This implies that the seams can form an angle of at most 45 degrees with respect to their base line. Increasing the step value lets you overcome this limit, but may lead to the introduction of artifacts. In order to balance the situation, you can use the rigidity setting."
msgstr "Her kan du velge det største transversale steget som piksler i sømmene kan ta. I standardalgoritmen, som tilsvarer standard steg = 1, kan hvert piksel flyttes høyst ett piksel i forhold til sine naboer. Dette betyr at sømmer kan danne en vinkel på høyst 45 grader med deres grunnlinje. Om steglengden økes kan denne begrensningen unngås, men det kan føre til at det dannes artefakter. For å balansere denne situasjonen kan du bruke stivhetsinnstillingen."
msgid "During the carving process, at each step the optimal seam to be carved is chosen based on the relevance value for each pixel. However, in the case where two seams are equivalent (which may happen, for instance, when large portions of the image have the same color), the algorithm always chooses the seams from one side. In some cases, this can pose problems, e.g. an object centered in the original image might not be centered in the resulting image. In order to overcome this effect, this setting allows the favored side to be switched automatically during rescaling, at the cost of slightly worse performance."
msgstr "Under utskjæringsprosessen velges den beste sømmen i hvert steg basert på relevansverdien for hvert piksel, men når to sømmer er likeverdige (for eksempel når store deler av bildet har samme farge), så velger algoritmen alltid sømmene fra én side. I noen tilfeller kan dette gi problemer, f.eks. noe som er sentrert i originalbildet er kanskje ikke sentrert i resultatbildet. For å unngå dette vil denne innstillingen gjøre at den foretrukne siden byttes automatisk under omskaleringen, på bekostning av litt dårligere ytelse."
msgid "This is the free rotation operation preview. If you move the mouse cursor on this preview, a vertical and horizontal dashed line will be drawn to guide you in adjusting the free rotation correction. Release the left mouse button to freeze the dashed line's position."
msgstr "Forhåndsvisning av fri bildeomdreining. Hvis du flytter musepekeren i denne visningen, tegnes en stiplet vannrett og loddrett linje som skal veilede deg når du justere omdreiningen. Slipp opp den venstre museknappen for å «fryse» plasseringen av de stiplede linjene."
msgid "This is the perspective transformation operation preview. You can use the mouse for dragging the corner to adjust the perspective transformation area."
msgstr "Her forhåndsvises omformingen av bildeperspektivet. Du kan trekke i hjørnene med musa for å endre perspektivet."
"<p>Here you can see the aspect ratio selection preview used for cropping. You can use the mouse to move and resize the crop area.</p>"
"<p>Press and hold the <b>CTRL</b> key to move the opposite corner too.</p>"
"<p>Press and hold the <b>SHIFT</b> key to move the closest corner to the mouse pointer.</p>"
msgstr ""
"<p>Her kan du se forholdet mellom høyde og bredde på området som skal skjæres ut. Du kan bruke musa for å flytte området som skal skjæres ut eller endre dets størrelse.</p>"
"<p>Hold nede <b>CTRL</b>-tasten for å flytte motsatt hjørne også.</p>"
"<p>Hold nede <b>SHIFT</b>-tasten for å flytte det nærmeste hjørnet bort til musepekeren.</p>"
#| "<p>Select your constrained aspect ratio for cropping. Aspect Ratio Crop tool uses a relative ratio. That means it is the same if you use centimeters or inches and it does not specify the physical size.</p>"
#| "<p>You can see below a correspondence list of traditional photographic paper sizes and aspect ratio crop:</p>"
#| "<p><b>8:5</b>: common wide-screen monitor (as 1680x1050)</p>"
#| "<p><b>2:1</b>, <b>3:1</b>, <b>4:1</b>: common panoramic sizes</p>"
#| "<p><b>16:9</b>: common tv-screen (as HDTV or Full-HD)</p>"
#| "<p>The <b>Golden Ratio</b> is 1:1.618. A composition following this rule is considered visually harmonious but can be unadapted to print on standard photographic paper.</p>"
#| "<p>The <b>Current Aspect Ratio</b> takes aspect ratio from the currently opened image.</p>"
msgid ""
"<p>Select your constrained aspect ratio for cropping. Aspect Ratio Crop tool uses a relative ratio. That means it is the same if you use centimeters or inches and it does not specify the physical size.</p>"
"<p>You can see below a correspondence list of traditional photographic paper sizes and aspect ratio crop:</p>"
"<p><b>8:5</b>: common wide-screen monitor (as 1680x1050)</p>"
"<p><b>2:1</b>, <b>3:1</b>, <b>4:1</b>: common panoramic sizes</p>"
"<p><b>16:9</b>: common tv-screen (as HDTV or Full-HD)</p>"
"<p>The paper <b>Format DIN A</b> use the ratio 1:1.414</p>"
"<p>The <b>Golden Ratio</b> is 1:1.618. A composition following this rule is considered visually harmonious but may not be suitable to print on standard photographic paper.</p>"
"<p>The <b>Current Aspect Ratio</b> takes aspect ratio from the currently opened image.</p>"
msgstr ""
"<p>Her velger du hvordan høyde-/breddeforholdet skal reguleres ved beskjæring. Beskjæringsverktøyet bruker et relativt forhold. Derfor er det likegyldig om du bruker centimeter eller tommer og man oppgir ingen fysisk størrelse.</p>"
"<p>Nedenfor ser du en liste over vanlig brukte høyde-/breddeforhold og størrelser for fotopapir: </p>"
"<p><b>16:9</b>: vanlig TV-skjerm (som HDTV eller Full-HD)</p>"
"<p> <b>Det gyldne snitt</b> har forholdet 1:1.618. En slik komposisjon ansees for å være visuelt harmonisk, men må endres for å trykkes på vanlig fotopapir.</p>"
" "
"<p><b>Gjeldende høyde/breddeforhold</b> tar forholdet fra det bildet som nå er åpnet.</p>"
msgid "This is the shear operation preview. If you move the mouse cursor on this preview, a vertical and horizontal dashed line will be drawn to guide you in adjusting the shear correction. Release the left mouse button to freeze the dashed line's position."
msgstr "Her forhåndsvises skjær-deformeringen. Hvis du flytter musepekeren i forhåndsvisningen får du en vannrett og en loddrett stiplet linje som kan hjelpe deg til å justere deformeringen. Slipp venstre museknapp for å legge linjene fast."
"<p>This tool permit to changes geolocation information from items.</p>"
"<p>This tool can edit GPS data, manually or over a map. Reverse geo-coding is also available through web services.</p>"
"<p>This tool as also an export function to KML to store map traces in Google format.</p>"
"<p>Finally, this tool is able to read a GPS trace from a device to synchronize geo-location of items if you camera do not have an embedded GPS device.</p>"
msgid "<b>Note: <b><a href='http://en.wikipedia.org/wiki/EXIF'>EXIF</a></b> text tags marked by (*) only support printable <b><a href='http://en.wikipedia.org/wiki/Ascii'>ASCII</a></b> characters.</b>"
msgstr "<b>Merk: <b><a href='http://en.wikipedia.org/wiki/EXIF'>EXIF</a></b> tekst-tagger merket med (*) støtter bare skrivbare <b><a href='http://en.wikipedia.org/wiki/Ascii'>ASCII</a></b>-tegn.</b>"
msgid "Set here the date and time when the original image data was generated. For a digital still camera the date and time the picture was taken are recorded."
msgstr "Oppgi her dato og tid da de originale bildedataene ble laget. For et digitalt stillbildekamera er det dato/tid da bildet ble tatt som blir registrert."
msgid "Set here the date and time when the image was stored as digital data. If, for example, an image was captured by a digital still camera and at the same time the file was recorded, then Original and Digitization date and time will have the same contents."
msgstr "Oppgi her dato og tid da bildet ble lagret som digitale data. Hvis. for eksempel, et bilde ble tatt med et digitalt stillbildekamera og fila samtidig ble registrert, så er det originale og digitaliseringstidspunktet det samme."
msgid "<b>Warning: EXIF <b><a href='http://en.wikipedia.org/wiki/Exchangeable_image_file_format#MakerNote_data'>Makernotes</a></b> can be unreadable if you set wrong device manufacturer/model description.</b>"
msgstr "<b>Advarsel: EXIF <b><a href='http://en.wikipedia.org/wiki/Exchangeable_image_file_format#MakerNote_data'>Makernotes</a></b> kan bli uleselige hvis du oppgir feil beskrivelse av produsent/modell for kameraet/bildeenheten.</b>"
msgid "Select here the mode used by the camera to set exposure when the picture was taken. In auto-bracketing mode, the camera shoots a series of frames of the same scene at different exposure settings."
msgstr "Oppgi her eksponeringsmodus som kameraet brukte da bildet ble tatt. Ved automatisk flereksponering tar kameraet en serie bilder av samme motiv med forskjelligew eksponeringsinnstillinger."
msgid "Set here the flash energy used to take the picture in BCPS units. Beam Candle Power Seconds is the measure of effective intensity of a light source when it is focused into a beam by a reflector or lens. This value is the effective intensity for a period of one second."
msgstr "Oppgi her blitsenergien brukt til å ta bildet, i BCPS-enheter. BCPS er et mål på effektiv intensitet for en lyskilde når den er fokusert til en stråle med en reflektor eller linse. Denne verdien er den effektive lysintensiteten i ett sekund."
msgid "<b>Note: <b><a href='http://en.wikipedia.org/wiki/IPTC_Information_Interchange_Model'>IPTC</a></b> text tags only support the printable <b><a href='http://en.wikipedia.org/wiki/Ascii'>ASCII</a></b> characters and limit string sizes. Use contextual help for details.</b>"
msgstr "<b>Merk: <b><a href='http://en.wikipedia.org/wiki/IPTC_Information_Interchange_Model'>IPTC</a></b> tekst-tagger støtter bare skrivbare tegn fra <b><a href='http://en.wikipedia.org/wiki/Ascii'>ASCII</a></b>-tegnsettet og begrenser strenglengder. Bruk konteksthjelp for detaljer.</b>"
msgid "Enter here the Informative Provider Reference. I.P.R is a name registered with the IPTC/NAA, identifying the provider that provides an indicator of the content. The default value for the I.P.R is \"IPTC\" if a standard Reference Code is used. This field is limited to 32 ASCII characters."
msgstr "Oppgi her Informative Provider Reference, IPR. I.P.R er et navn som er registrert hos IPTC/NAA, som navngir leverandøren som tilbyr en indikator for innholdet. Standardverdi for I.P.R er «IPTC» hvis det brukes en standard referansekode. Dette feltet har høyst 32 ASCII-tegn."
msgid "Enter here the Subject Reference Number. Provides a numeric code to indicate the Subject Name plus optional Subject Matter and Subject Detail Names in the language of the service. Subject Reference is a number from the range 01000000 to 17999999 and represent a language independent international reference to a Subject. A Subject is identified by its Reference Number and corresponding Names taken from a standard lists given by IPTC/NAA. If a standard reference code is used, these lists are the English language reference versions. This field is limited to 8 ASCII digit code."
msgstr "Oppgi her referansenummer for emnet. Dette er en tallkode som viser Emnenavn og valgfritt Emne- og Emnedetaljnavn i tjenestens språk. Referansenummeret er et tall fra 01000000 til 17999999 og representerer en språkuavhengig internasjonal referanse til et Emne. Et Emne identifiseres ved sitt referansenummer og tilsvarende navn tatt fra standardlister utgitt av IPTC//NAA. Hvis det brukes en standard referansekode er disse listene referanseversjoner på engelsk. Dette feltet har høyst 8 sifre."
msgid "Enter here the Subject Name. English language is used if you selected a standard IPTC/NAA reference code. This field is limited to 64 ASCII characters."
msgstr "Oppgi her Emne-navnet. Engelsk blir brukt hvis du valgte en standard IPTC/NAA-referansekode. Dette feltet har høyst 64 ASCII-tegn."
msgid "Enter here the Subject Matter Name. English language is used if you selected a standard IPTC/NAA reference code. This field is limited to 64 ASCII characters."
msgstr "Oppgi her Emne-navnet. Engelsk blir brukt hvis du valgte en standard IPTC/NAA-referansekode. Dette feltet har høyst 64 ASCII-tegn."
msgid "Enter here the Subject Detail Name. English language is used if you selected a standard IPTC/NAA reference code. This field is limited to 64 ASCII characters."
msgstr "Oppgi her Emnedetalj-navnet. Engelsk blir brukt hvis du valgte en standard IPTC/NAA-referansekode. Dette feltet har høyst 64 ASCII-tegn."
msgid "Enter here the Informative Provider Reference. I.P.R is a name registered with the XMP/NAA, identifying the provider that provides an indicator of the content. The default value for the I.P.R is \"XMP\" if a standard Reference Code is used."
msgstr "Oppgi her Informative Provider Reference, IPR. I.P.R er et navn som er registrert hos XMP//NAA, som navngir leverandøren som tilbyr en indikator for innholdet. Standardverdi for I.P.R er «XMP\"» hvis det brukes en standard referansekode."
msgid "Enter here the Subject Reference Number. Provides a numeric code to indicate the Subject Name plus optional Subject Matter and Subject Detail Names in the language of the service. Subject Reference is a number from the range 01000000 to 17999999 and represent a language independent international reference to a Subject. A Subject is identified by its Reference Number and corresponding Names taken from a standard lists given by XMP/NAA. If a standard reference code is used, these lists are the English language reference versions. This field is limited to 8 digit code."
msgstr "Oppgi her referansenummer for emnet. Dette er en tallkode som viser Emnenavn og valgfritt Emne- og Emnedetaljnavn i tjenestens språk. Referansenummeret er et tall fra 01000000 til 17999999 og representerer en språkuavhengig internasjonal referanse til et Emne. Et Emne identifiseres ved sitt referansenummer og tilsvarende navn tatt fra standardlister utgitt av XMP/NAA. Hvis det brukes en standard referansekode er disse listene referanseversjoner på engelsk. Dette feltet har høyst 8 sifre."
#| "<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">this list allows you to open new pages</p>"
#| "\n"
#| "<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-weight:600;\">Ctrl</span> to open in a new page</p>"
#| "</body></html>"
msgid ""
"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">You can download a calendar for your country from <a href=\"http://www.icalshare.com\"><span style=\" text-decoration: underline; color:#0057ae;\">http://www.icalshare.com</span></a> or other sites.</p>"
"\n"
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">This is fully optional. All the events from this calendar will be printed in red.</p>"
"</body></html>"
msgstr ""
"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">med denne lista kan du åpne nye sider</p>"
"\n"
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-weight:600;\">Ctrl</span> for å åpne i en ny side</p>"
msgid "<p>This tool will also permit to set specific dates on your calendar using external data event files as <a href='http://en.wikipedia.org/wiki/VCalendar'>vCalendar</a>, and <a href='http://en.wikipedia.org/wiki/Icalendar'>iCalendar</a> formats.</p>"
msgid "Set automatic level selection (maximized) for pyramid blending, i.e. optimize image features (contrast, saturation, . . .) to be as global as possible."
msgid "Set the number of levels for pyramid blending. Balances towards local features (small number) or global features (high number). Additionally, a low number trades off quality of results for faster execution time and lower memory usage."
msgid "Force hard blend masks without averaging on finest scale. This is only useful for focus stacks with thin and high contrast features. It improves sharpness at the expense of increased noise."
msgid "Sets the relative weight of high-contrast pixels. Increasing this weight makes pixels with neighboring differently colored pixels contribute more to the final output. Particularly useful for focus stacks."
msgid "Use Color Appearance Modelling (CIECAM02) to render detailed colors. Your input files should have embedded ICC profiles. If no ICC profile is present, sRGB color space will be assumed. The difference between using this option and default color blending algorithm is very slight, and will be most noticeable when you need to blend areas of different primary colors together."
"<p>This tool permit to blend bracketed images together to create pseudo HDR photo.</p>"
"<p>To create high definition range image, you need to use images from same subject taken with a tripod and exposed with different exposure settings.</p>"
"<p>To create image with better results, you can use RAW images instead JPEG, where colors depth is higher and are well adapted for merging pixels by pixels.</p>"
"<p>This tool fuses bracketed images with different exposure to make pseudo <a href='http://en.wikipedia.org/wiki/High_dynamic_range_imaging'>HDR image</a>.</p>"
"<p>It can also be used to <a href='https://en.wikipedia.org/wiki/Focus_stacking'>merge focus bracketed stack</a> to get a single image with increased depth of field.</p>"
"<p>This assistant will help you to configure how to import images before merging them to a single one.</p>"
"<p>Bracketed images must be taken with the same camera, in the same conditions, and if possible using a tripod.</p>"
"<p>For more information, please take a look at <a href='http://en.wikipedia.org/wiki/Bracketing'>this page</a></p>"
"<p>Now, we will pre-process bracketed images before fusing them.</p>"
"<p>To perform auto-alignment, the <b>%1</b> program from the <a href='%2'>%3</a> project will be used. Alignment must be performed if you have not used a tripod to take bracketed images. Alignment operations can take a while.</p>"
"<p>Pre-processing operations include Raw demosaicing. Raw images will be converted to 16-bit sRGB images with auto-gamma.</p>"
"<p>Press \"Next\" to start pre-processing.</p>"
"</qt>"
msgstr ""
"<qt>"
"<p>Nå vil vi forbehandle bracketing-bildene før vi smelter dem sammen.</p>"
"<p>Programmet <b>%1</b> fra prosjektet <a href='%2'>%3</a> blir brukt til automatisk innretting. Innretting må gjøres hvis du ikke har brukt stativ til å ta bracketing-bilder. Innretting kan ta noe tid.</p>"
"<p>Forbehandling inkluderer Raw av-mosaikkering. Raw-bilder vil bli omgjort til 16-bit sRGB med auto-gamma.</p>"
"<p>Trykk «Neste»-knappen for å begynne forbehandling.</p>"
"The media server permit to share items through the local network using <a href='https://en.wikipedia.org/wiki/Digital_Living_Network_Alliance'>DLNA</a> standard and <a href='https://en.wikipedia.org/wiki/Universal_Plug_and_Play'>UPNP</a> protocol. Many kind of electronic devices can support DLNA, as tablets, cellulars, TV, etc.<br/>"
"Note: depending of the network features and the configuration, the delay to discover the server on client devices can take a while."
"<p>This tool permit to assemble images together to create large panorama.</p>"
"<p>To create panorama image, you need to use images taken from same point of view with a tripod and exposed with same settings.</p>"
"<p>The tool is able to assemble shot taken horizontally, vertically, or as a matrix. Take a care that target image will become huge and require a lots of memory to be processed.</p>"
msgid "<b>JPEG output</b>: Using JPEG output, the panorama file will be smaller at the cost of information loss during compression. This is the easiest way to share the result, or print it online or in a shop."
msgid "<b>TIFF output</b>: Using TIFF output, you get the same color depth than your original photos using RAW images at the cost of a bigger panorama file."
msgid "<b>File name template</b>: Set here the base name of the files that will be saved. For example, if your template is <i>panorama</i> and if you chose a JPEG output, then your panorama will be saved with the name <i>panorama.jpg</i>. If you choose to save also the project file, it will have the name <i>panorama.pto</i>."
msgid "<b>Save project file</b>: You can keep the project file generated to stitch your panorama for further tweaking within <a href=\"http://hugin.sourceforge.net/\">Hugin</a> by checking this. This is useful if you want a different projection, modify the horizon or the center of the panorama, or modify the control points to get better results."
#| "<p><font color=\"red\"><b>Warning:</b> This file already exists.</font></p>"
#| "</qt>"
msgid ""
"<qt>"
"<p><font color=\"orange\"><b>Warning:</b> One or more converted raw files already exists (they will be skipped during the copying process).</font></p>"
"</qt>"
msgstr ""
"<qt>"
"<p><font color=\"red\"><b>Advarsel:</b> Denne fila finnes fra før.</font></p>"
"<p>Congratulations. Your images are stitched into a panorama.</p>"
"<p>Your panorama will be created to the directory:<br />"
"<b>%1</b><br />"
"once you press the <i>Finish</i> button, with the name set below.</p>"
"<p>If you choose to save the project file, and if your images were raw images then the converted images used during the stitching process will be copied at the same time (those are TIFF files that can be big).</p>"
msgid "<b>Detect moving skies</b>: During the control points selection and matching, this option discards any points that are associated to a possible cloud. This is useful to prevent moving clouds from altering the control points matching process."
"<p>Now, we will pre-process images before stitching them.</p>"
"<p>Pre-processing operations include Raw demosaicing. Raw images will be converted to 16-bit sRGB images with auto-gamma.</p>"
"<p>Pre-processing also include a calculation of some control points to match overlaps between images. For that purpose, the <b>%1</b> program from the <a href='%2'>%3</a> project will be used.</p>"
"<p>Press \"Next\" to start pre-processing.</p>"
"</qt>"
msgstr ""
"<qt> tilåa"
"<p>Nå skal vi forbehandle bildene før de blir sydd sammen.</p>"
" "
"<p>Forbehandling omfatter mosaikkfjerning fra Raw-bilder, som blir gjort om til 16-bit sRGB-bilder med auto-gamma.</p>"
" "
"<p>Forbehandling omfatter også beregning av noen kontrollpunkter for å tilpasse overlapp mellom bilder, Programmet <b>%1</b> fra prosjektet <a href='%2'>%3</a> vil bli brukt.</p>"
" "
"<p>Trykk «Neste» for å starte forbehandling.</p>"
"<p>You can generate quickly a <a href='https://en.wikipedia.org/wiki/Time-lapse_photography'>Time-lapse</a> movie from images</p>"
"<p>captured with a tripod mounted camera controlled with an <a href='https://en.wikipedia.org/wiki/Intervalometer#Photography'>intervalometer</a>.</p>"
"<p></p>"
"<p>You can also create a video presentation with transition</p>"
"<p>effects and audio tracks to show on a TV screen.</p>"
msgid "<i>An effect is an visual panning or zooming applied while an image is displayed. The effect duration will follow the number of frames used to render the image on video stream.</i>"
msgid "<i>A transition is an visual effect applied between two images. For some effects, the duration can depend of random values and can change while the slideshow.</i>"
"<li style=\" margin-top:12px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">move mouse in up/down-direction while pressing the right mouse button</li>"
"\n"
"<li style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">alternatively, press c and use the scrollwheel<br />"
"<li style=\" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">move mouse while pressing the left button</li>"
msgid "Sets the target address to upload the images to. This can be any address as used in Dolphin or Konqueror, e.g. ftp://my.server.org/sub/folder."
msgstr "Setter måladressen som bildene skal lastes opp til. Dette kan være enhver adresse som kan brukes i Dolphin eller Konqueror, f.eks. ftp://my.server.org/under/mappe."
"<p>This tool permit to export and import items with Google web-services.</p>"
"Google Photo and Google Drive web services are supported."
"<p>See Google web sites for details: <a href='https://photos.google.com'>https://photos.google.com</a> and <a href='https://www.google.com/drive/'>https://www.google.com/drive/</a></p>"
msgstr "Et verktøy for å flette sammen bilder med bracketing"
"<p>You cannot use digiKam without a working database. digiKam will attempt to start now, but it will <b>not</b> be functional. Please check the database settings in the <b>configuration menu</b>.</p>"
msgstr ""
"<p>Klarte ikke å åpne databasen. </p>"
"<p> Du kan ikke bruke digiKam uten en fungerende database. digiKam vil forsøke å starte nå, men det kommer <b>ikke</b> til å virke. Du bør kontrollere database-oppsettet i <b>oppsettmenyen</b>.</p>"
#| "<p>Failed to open the database. Error message from database:</p>"
#| "<p><b>%1</b></p>"
#| "</p>"
#| "<p>You cannot use digiKam without a working database. digiKam will attempt to start now, but it will <b>not</b> be functional. Please check the database settings in the <b>configuration menu</b>.</p>"
msgid ""
"<p>Failed to open the database. Error message from database:</p>"
"<p><b>%1</b></p>"
"<p>You cannot use digiKam without a working database. digiKam will attempt to start now, but it will <b>not</b> be functional. Please check the database settings in the <b>configuration menu</b>.</p>"
msgstr ""
"<p>Klarte ikke å åpne databasen. Feilmelding fra databasen:</p>"
"<p><b>%1</b></p>"
"</p>"
"<p>Du kan ikke bruke digiKam uten en fungerende database. digiKam vil forsøke å starte nå, men det kommer <b>ikke</b> til å virke. Du bør kontrollere database-oppsettet i <b>oppsettmenyen</b>.</p>"
"Your locale has changed since this album was last opened.\n"
"Old locale: %1, new locale: %2\n"
"If you have recently changed your locale, you need not be concerned.\n"
"Please note that if you switched to a locale that does not support some of the filenames in your collection, these files may no longer be found in the collection. If you are sure that you want to continue, click 'Yes'. Otherwise, click 'No' and correct your locale setting before restarting digiKam."
msgstr ""
"Lokaltilpasningen din er endret siden sist albumet ble åpnet.\n"
"Gammel lokaltilpasning : %1, Ny lokaltilpasning : %2\n"
"Hvis du endret lokaltilpasning nylig, er dette i orden.\n"
"Merk deg at dersom du byttet til en lokaltilpasning som ikke støtter noen av filnavnene i samlingen, vil du ikke lenger finne disse filene i samlingen. Hvis du er sikker på at du vil gå videre, trykk på «Ja». Hvis ikke trykk på «Nei» og rett lokaltilpasningen din før du starter digiKam om igjen."
"<p>You have chosen the folder \"%1\" as the place to store the database. A database file from an older version of digiKam is found in this folder.</p>"
" "
"<p>Would you like to upgrade the old database file - confirming that this database file was indeed created for the pictures located in the folder \"%2\" - or ignore the old file and start with a new database?</p>"
" "
msgstr ""
"<p>Du har valgt mappe «%1» som lagringsplass for databasen. Det finnes en datatabasefil fra en eldre versjon av digiKam i denne mappa.</p>"
" "
"<p>Vil du oppgradere den gamle databasefilen – idet du bekrefter at denne databasefilen virkelig ble laget for bildene i mappe «%2» – eller vil du heller overse den gamle filen og begynne med en ny database?</p>"
"<p>You have chosen the folder \"%1\" as the new place to store the database. A database file from an older version of digiKam is found in this folder.</p>"
" "
"<p>Would you like to upgrade the old database file, start with a new database, or copy the current database to this location and continue using it?</p>"
" "
msgstr ""
"<p>Du har valgt mappa «%1» som ny lagringsplass for databasen. Her finnes en databasefil fra en eldre versjon av digiKam</p>"
"<p>Vil du oppgradere den gamle databasefilen, begynne med en ny database, eller kopiere gjeldende database til denne mappa og fortsette å bruke den?</p>"
"<p>You have chosen the folder \"%1\" as the new place to store the database. A database file from an older version of digiKam is found in this folder.</p>"
" "
"<p>Would you like to upgrade the old database file or start with a new database?</p>"
msgstr ""
"<p>Du har valgt mappa «%1» som ny lagringsplass for databasen. Her finnes en databasefil fra en eldre versjon av digiKam</p>"
"<p>Vil du oppgradere den gamle databasefilen, eller begynne med en ny database?</p>"
msgid "Failed to backup the existing database file (\"%1\"). Refusing to replace file without backup, using the existing file."
msgstr "Klarte ikke å ta sikkerhetskopi av eksisterende databasefil («%1»). Fila blir ikke byttet ut uten sikkerhetskopi. Eksisterende fil blir brukt."
msgid "This is a CD/DVD, which is identified by the label that you can set in your CD burning application. There is already another entry with the same label. The two will be distinguished by the files in the top directory, so please do not append files to the CD, or it will not be recognized. In the future, please set a unique label on your CDs and DVDs if you intend to use them with digiKam."
msgstr "Dette er en CD/DVD som kjennes igjen på etiketten du lager i brenneprogrammet ditt. Det finnes allerede et element med samme etikett. Det skjelnes mellom de to ved hjelp av filene i øverst i filstrukturen, så ikke legg til filer til CD-en, da vil den ikke bli gjenkjent. Heretter bør du bruke entydige etiketter på CD-ene og DVD-ene dine hvis du vil bruke dem med digiKam."
msgid "This is a CD/DVD. It will be identified by the label (\"%1\")that you have set in your CD burning application. If you create further CDs for use with digikam in the future, please remember to give them a unique label as well."
msgstr "Dette er en CD/DVD. Den blir gjenkjent på etiketten («%1») som du valgte i brenneprogrammet ditt. Hvis i framtiden vil lage flere CD-er som skal brukes i digiKam, må du huske å gi dem også entydige etiketter."
msgid "This entry will only be identified by the path where it is found on your system (\"%1\"). No more specific means of identification (UUID, label) is available."
msgstr "Denne oppføringen gjenkjennes bare ved stien til plasseringen på datamaskinen («%1»). Det finnes ikke noe bedre måte (UUID-etikett) å gjenkjenne den på."
msgid "It is not possible on your system to identify the storage medium of this path. It will be added using the file path as the only identifier. This will work well for your local hard disk."
msgstr "digikam klarte ikke å gjenkjenne lagringsmediet i denne stien. Stien blir brukt som eneste kjennemerke. Dette virker bra for din lokale harddisk."
msgid "The database is not valid: the \"DBVersion\" setting does not exist. The current database schema version cannot be verified. Try to start with an empty database. "
msgstr "Databasen er ugyldig: Innstillingen «DBVersion» finnes ikke. Denne versjonen av databaseskjemaet kan ikke bekreftes. Prøv å starte med en tom database. "
msgid "The database has been used with a more recent version of digiKam and has been updated to a database schema which cannot be used with this version. (This means this digiKam version is too old, or the database format is too recent.) Please use the more recent version of digiKam that you used before. "
msgstr "Databasen har vært brukt av en nyere versjon av digiKam og er blitt oppdatert til et databaseskjema som ikke kan brukes av denne versjonen. (Det betyr at denne versjonen av digiKam er for gammel, eller at databaseformatet er for nytt. Benytt heller den tidligere versjonen av digiKam som du har brukt før. "
#| msgid "Failed to open a database transaction on your database file \"%1\". This is unusual. Please check that you can access the file and no other process has currently locked the file. If the problem persists you can get help from the digikam-devel@kde.org mailing list. As well, please have a look at what digiKam prints on the console. "
msgid "Failed to open a database transaction on your database file \"%1\". This is unusual. Please check that you can access the file and no other process has currently locked the file. If the problem persists you can get help from the digikam developers mailing list (see www.digikam.org/support). As well, please have a look at what digiKam prints on the console. "
msgstr "Klarte ikke å åpne en databasetransaksjon i databasefilen «%1». Dette er uvanlig. Kontroller at du har tilgang til filen og at ingen annen prosess låser den. Hvis problemet vedvarer kan du søke hjelp i e-postlisten digikam-devel@kde.org. Se også etter hva digiKam skriver til terminalen."
#| msgid "The schema updating process from version 4 to 6 failed, caused by an error that we did not expect. You can try to discard your old database and start with an empty one. (In this case, please move the database files \"%1\" and \"%2\" from the directory \"%3\"). More probably you will want to report this error to the digikam-devel@kde.org mailing list. As well, please have a look at what digiKam prints on the console. "
msgid "The schema updating process from version 4 to 6 failed, caused by an error that we did not expect. You can try to discard your old database and start with an empty one. (In this case, please move the database files \"%1\" and \"%2\" from the directory \"%3\"). More probably you will want to report this error to the digikam developers mailing list (see www.digikam.org/support). As well, please have a look at what digiKam prints on the console. "
msgstr "Oppdatering av skjema fra versjon 4 til 6 mislyktes som følge av en uventet feilsituasjon. Du kan prøve å kvitte deg med den gamle databasen og begynne med en tom. (Isåfall, flytt datafilene «%1» og «%2» fra mappe «%3»). Antageligvis skulle du heller rapportere feilen til e-postlisten digikam-devel@kde.org. Se også etter hva digiKam skriver til konsollet."
msgid "Failed to update the database schema from version %1 to version %2. Please read the error messages printed on the console and report this error as a bug at bugs.kde.org. "
msgstr "Klarte ikke å oppdatere databaseskjemaet fra versjon %1 til versjon %2. Les feilmeldingene skrevet på konsollet og rapporter denne feilen til bugs.kde.org. "
msgid "The database update action cannot be found. Please ensure that the dbconfig.xml file of the current version of digiKam is installed at the correct place. "
msgstr "Kan ikke finne handlingen for databaseoppdatering. Kontroller at dbconfig.xml-fila for gjeldende versjon av digiKam er installert på riktig sted. "
msgid "Failed to copy the old database file (\"%1\") to its new location (\"%2\"). Error message: \"%3\". Please make sure that the file can be copied, or delete it."
msgstr "Klarte ikke å kopiere den gamle databasefilen («%1») til den nye plasseringen («%2»). Feilmelding: «%3». Forsikre deg om at det er mulig å kopiere filen."
msgid "The old database file (\"%1\") has been copied to the new location (\"%2\") but it cannot be opened. Please delete both files and try again, starting with an empty database. "
msgstr "Den gamle databasefilen («%1») er kopiert til ny plassering («%2») men den kan ikke åpnes. Fjern begge filer og prøv igjen å begynne med en tom database. "
msgid "No album library path has been found in the configuration file. Giving up the schema updating process. Please try with an empty database, or repair your configuration."
msgstr "Fant ikke noe albumbibliotek i oppsettfilen. Gir opp å oppdatere skjema. Prøv med en tom database, eller rett oppsettfilen."
#| msgid "There was an error associating your albumLibraryPath (\"%1\") with a storage volume of your system. This problem may indicate that there is a problem with your installation. If you are working on Linux, check that HAL is installed and running. In any case, you can seek advice from the digikam-devel@kde.org mailing list. The database updating process will now be aborted because we do not want to create a new database based on false assumptions from a broken installation."
msgid "There was an error associating your albumLibraryPath (\"%1\") with a storage volume of your system. This problem may indicate that there is a problem with your installation. If you are working on Linux, check that HAL is installed and running. In any case, you can seek advice from the digikam developers mailing list (see www.digikam.org/support). The database updating process will now be aborted because we do not want to create a new database based on false assumptions from a broken installation."
msgstr "Det oppstod en feil i forbindelse med albumLibraryPath («%1») i forbindelse med et lagringsmeduim på systemet ditt. Det kan tyde på at det er noe galt med installasjonen. Hvis du arbeider på Linux skal du kontrollere at HAL er installert og kjører. Uansett kan du få råd hos digikam_devel@kde.org. Oppdateringen av databasen kommer til å avbrytes fordi vi ikke vil lage en ny database utifra gale forutsetninger."
#| msgid "Could not open the dbconfig.xml file. This file is installed with the digikam application and is absolutely required to run digikam. Please check your installation."
msgid "Could not open the configuration file <b>%1</b>. This file is installed with the digikam application and is absolutely required to run digikam. Please check your installation."
msgstr "Klarte ikke åpne fila dbconfig.xml. Denne fila installeres sammen med digikam-programmet og er helt nødvendig for å kjøre digikam. Kontroller installasjonen."
#| msgid "An old version of the dbconfig.xml file <filename>%1</filename> is found. Please ensure that the version released with the running version of digiKam is installed. "
msgid "An old version of the configuration file <b>%1</b> is found. Please ensure that the version released with the running version of digiKam is installed. "
msgstr "Det ble funnet en gammel versjon av dbconfig.xml-fila <filename>%1</filename>. Pass på at versjonen som ble utgitt med denne versjonen av digikam er installert. "
#| msgid "The database is not valid: the \"DBVersion\" setting does not exist. The current database schema version cannot be verified. Try to start with an empty database. "
msgid "The database is not valid: the \"DBSimilarityVersion\" setting does not exist. The current database schema version cannot be verified. Try to start with an empty database. "
msgstr "Databasen er ugyldig: Innstillingen «DBVersion» finnes ikke. Denne versjonen av databaseskjemaet kan ikke bekreftes. Prøv å starte med en tom database. "
msgid "The database has been used with a more recent version of digiKam and has been updated to a database schema which cannot be used with this version. (This means this digiKam version is too old, or the database format is to recent) Please use the more recent version of digikam that you used before. "
msgstr "Databasen har vært brukt av en nyere versjon av digiKam og er blitt oppdatert til et databaseskjema som ikke kan brukes av denne versjonen. (Det betyr at denne versjonen av digiKam er for gammel, eller at databaseformatet er for nytt. Benytt heller den tidligere versjonen av digiKam som du har brukt før. "
#. +> trunk5
#: core/libs/database/tags/facetags.cpp:377
#, kde-format
msgctxt "People on your photos"
msgid "People"
msgstr "Personer"
#. +> trunk5
#: core/libs/database/tags/facetags.cpp:421
#, kde-format
msgctxt "The list of detected faces from the collections but not recognized"
msgid "Unknown"
msgstr "Ukjent"
#. +> trunk5
#: core/libs/database/tags/facetags.cpp:441
#, fuzzy, kde-format
#| msgctxt "@item event is definite"
#| msgid "Confirmed"
msgctxt "The list of recognized faces from the collections but not confirmed"
msgid "The database is not valid: the \"DBThumbnailsVersion\" setting does not exist. The current database schema version cannot be verified. Try to start with an empty database. "
msgstr "Databasen er ugyldig: Innstillingen «DBThumbnailsVersion» finnes ikke. Denne versjonen av databaseskjemaet kan ikke bekreftes. Prøv å starte med en tom database. "
"<p>Select here the type of database backend.</p>"
"<p><b>SQlite</b> backend is for local database storage with a small or medium collection sizes. It is the default and recommended backend for collections with less than 100K items.</p>"
"<p><b>MySQL Internal</b> backend is for local database storage with huge collection sizes. This backend is recommend for local collections with more than 100K items.</p>"
"<p><i>Be careful: this one still in experimental stage.</i></p>"
"<p><b>MySQL Server</b> backend is a more robust solution especially for remote and shared database storage. It is also more efficient to manage huge collection sizes with more than 100K items.</p>"
"<p><i>Be careful: this one still in experimental stage.</i></p>"
"<p>Set here the location where the database files will be stored on your system. There are three databases: one for all collections properties, one to store compressed thumbnails, and one to store faces recognition metadata.<br/>"
"Write access is required to be able to edit image properties.</p>"
"<p>Databases are digiKam core engines. Take care to use a place hosted by fast hardware (as SSD) with enough free space especially for thumbnails database.</p>"
"<p>Note: a remote file system such as NFS, cannot be used here. For performance reasons, it is also recommended not to use removable media.</p>"
msgid "<p>Here you can configure locations where MySQL binary tools are located. digiKam will try to find these binaries automatically if they are already installed on your computer.</p>"
"<p>digiKam expects that database is already created with a dedicated user account. This user name <i>digikam</i> will require full access to the database.<br/>"
"If your database is not already set up, you can use the following SQL commands (after replacing the <b><i>password</i></b> with the correct one).</p>"
"<p>Note: with a Linux server, a database can be initialized following the commands below:</p>"
"<p># su</p>"
"<p># systemctl restart mysqld</p>"
"<p># mysql -u root</p>"
"<p>...</p>"
"<p>Enter SQL code to Mysql prompt in order to init digiKam databases with grant privileges (see behind)</p>"
"<p>...</p>"
"<p>quit</p>"
"<p>NOTE: If you have an enormous collection, you should start MySQL server with mysql --max_allowed_packet=128M OR in my.ini or ~/.my.cnf, change the settings</p>"
"<p>Use this configuration view to set all information to be connected to a remote <a href=\"https://en.wikipedia.org/wiki/MySQL\">Mysql database server</a> (or <a href=\"https://en.wikipedia.org/wiki/MariaDB\">MariaDB</a>) through a network. As with Sqlite or MySQL internal server, 3 databases will be stored on the remote server: one for all collections properties, one to store compressed thumbnails, and one to store faces recognition metadata.</p>"
"<p>Unlike Sqlite or MySQL internal server, you can customize the database names to simplify your backups.</p>"
"<p>Databases are digiKam core engines. To prevent performance issues, take a care to use a fast network link between the client and the server computers. It is also recommended to host database files on fast hardware (as <a href=\"https://en.wikipedia.org/wiki/Solid-state_drive\">SSD</a>) with enough free space, especially for thumbnails database, even if data are compressed using wavelets image format <a href=\"https://en.wikipedia.org/wiki/Progressive_Graphics_File\">PGF</a>.</p>"
"<p>The databases must be created previously on the remote server by the administrator. Look in <b>Requirements</b> tab for details.</p>"
"<p>Simulate black and white film exposure using a green filter. This is useful for all scenic shoots, especially portraits photographed against the sky.</p>"
msgstr ""
"<b>Svart-hvitt med grønt filter</b>:"
"<p>Etterligner eksponering på svart-hvitt film med grønnfilter. Dette gir en verdifull virkning på alle fotografier tatt i naturen; særlig på portretter med himmel som bakgrunn.</p>"
"<p>Simulate black and white film exposure using a red filter. This creates dramatic sky effects, and simulates moonlight scenes in the daytime.</p>"
msgstr ""
"<b>Svart-hvitt med rød-filter</b>:"
"<p>Etterligner svart-hvit film som eksponeres med rød-filter. Dette gir en dramatisk virkning på himmelen og etterligner måneskinnsscener om dagen.</p>"
"<p>Simulate black and white film exposure using a yellow filter. This has the most natural tonal correction, and improves contrast. Ideal for landscapes.</p>"
msgstr ""
"<b>Svart-hvitt med gul-filter</b>:"
"<p>Etterligner svart-hvit film som eksponeres med gul-filter. Forbedre kontrasten og gir den mest naturlige korreksjonen av fargetoner. Ideelt for landskaper.</p>"
"<p>Simulate black and white film exposure using a yellow-green filter. A yellow-green filter is highly effective for outdoor portraits because red is rendered dark while green appears lighter. Great for correcting skin tones, bringing out facial expressions in close-ups and emphasizing the feeling of liveliness. This filter is highly effective for indoor portraits under tungsten lighting.</p>"
msgstr ""
"<b>Svart-hvitt med gulgrønt filter</b>: "
"<p>Simuler svart-hvitt filmopptak med gulgrønt filter. Et gulgrønt filter er meget effektivt for portretter utendørs, fordi rødt blir gjengitt mørkt mens grønt ser lysere ut. Flott for å korrigere hudtoner, bringer fram ansiktsuttrykk i nærbilder og understreker en følelse av livlighet. Dette filteret er svært effektivt for innendørs portretter under glødelamper.</p>"
"<p>Gives a warm highlight and mid-tone while adding a bit of coolness to the shadows - very similar to the process of bleaching a print and re-developing in a sepia toner.</p>"
msgstr ""
"<b>Svart-hvitt med sepiatone.</b>:"
"<p>Gir varme til lyse og middels lyse toner, samtidig som skyggen får et kjølig preg. Virkningen ligner på den man får når man bleker et trykk og framkaller det i sepiatoner.</p>"
msgid "With this button, you can pick the color from original image used to set <b>Shadow Tone</b> smooth curves point on Red, Green, Blue, and Luminosity channels."
msgstr "Bruk denne knappen for å velge fargen fra det opprinnelige bildet som skal brukes til å stille inn punktene på jevne kurver for <b>skyggetonen</b> i kanalene for rødt, grønt, blått og lysstyrke."
msgid "With this button, you can pick the color from original image used to set <b>Middle Tone</b> smooth curves point on Red, Green, Blue, and Luminosity channels."
msgstr "Bruk denne knappen for å velge fargen fra det opprinnelige bildet som skal brukes til å stille inn punktene på jevne kurver for <b>mellomtonen</b> i kanalene for rødt, grønt, blått og lysstyrke."
msgid "With this button, you can pick the color from original image used to set <b>Highlight Tone</b> smooth curves point on Red, Green, Blue, and Luminosity channels."
msgstr "Bruk denne knappen for å velge fargen fra det opprinnelige bildet som skal brukes til å stille inn punktene på jevne kurver for <b>den lyse fargetonen</b> i kanalene for rødt, grønt, blått og lysstyrke."
msgid "Enable this option if you want to preserve the aspect ratio of image. If enabled, the border width will be a percentage of the image size, else the border width will be in pixels."
msgstr "Velg dette alternativet om du vil beholde høyde/bredde-forholdet. Hvis alternativet velges gis rammebredden i prosent av bildetstørrelsen. Ellers gis den i antall piksler."
msgid "Total smoothing power: if the Detail Factor sets the relative smoothing and the Anisotropy Factor the direction, the Smoothing Factor sets the overall effect."
msgstr "Total utjevningskraft: Når «Detaljeringsgrad» bestemmer relativ utjevning og «Anisotropi» bestemmer retningen, bestemmer du den samlede virkningen ved hjelp av «Utjevning»."
msgid "<b>Function</b>: This function combines the original RGB channels with the desaturated blurred image. This function is used in each of the tonemapping stages. It can be linear or power. Basically, this function increases the values where both the original and blurred image's value are low and do the opposite on high values."
msgstr "<b>Funksjon</b>: Denne funksjonen kombinerer de originale RGB-kanalene med det avmettede, slørete bildet. Denne funksjonen brukes i hver av toneavbildningsstegene. Den kan være lineær eller eksponensiell. Enkelt sagt øker denne funksjonen verdiene der både originalen og det slørete bildet har lave verdier, og gjør det motsatte ved høye verdier."
msgid "<b>Highlights saturation</b>: Usually the (perceived) saturation is increased. The user can choose to lower the saturation on original highlight and shadows from the image with these parameters."
msgstr "<b>Metning i høylys</b>: Som regel økes (den opfattede) metningen. Brukeren kan velge å minske metning i orignale høylys og skygger fra bildet med disse parametrene."
msgid "<b>Shadow saturation</b>: Usually the (perceived) saturation is increased. The user can choose to lower the saturation on original highlight and shadows from the image with these parameters."
msgstr "<b>Metning i skygger</b>: Som regel økes (den opfattede) metningen. Brukeren kan velge å minske metning i orignale høylys og skygger fra bildet med disse parametrene."
msgid "This value is the radius of the inner circle of the filter. In the inner circle the image is preserved. It is expressed as a multiple of the outer radius of the filter."
msgstr "Denne verdien er radien i den indre sirkelen i filteret. Bildet bevares i den indre sirkelen. Radien er uttrykt som et multiplum av den ytre radien i filteret."
msgid "This value is the radius of the outer circle of the filter. Outside the outer circle the effect of the filter is at its maximum. It is expressed as a multiple of the diagonal of the image."
msgstr "Denne verdien er radien i den ytre sirkelen i filteret. Filtereffekten er størst utenfor den ytre sirkelen. Radien er uttrykt som et multiplum av diagonalen i bildet."
msgid "This is the camera maker description string found in image meta-data. This one is used to query and find relevant camera device information from Lensfun database."
msgstr "Dette er kameraprodusentens beskrivelse funnet som en streng i bildets metadata. Den brukes til å spørre etter og finne relevant informasjon om kameraet fra Lensfun-databasen."
msgid "This is the camera model description string found in image meta-data. This one is used to query and found relevant camera device information from Lensfun database."
msgstr "Dette er kameraets modellbeskrivelse funnet som en streng i bildets metadata. Den brukes til å spørre etter og finne relevant informasjon om kameraet fra Lensfun-databasen."
msgid "This is the lens description string found in image meta-data. This one is used to query and found relevant lens information from Lensfun database."
msgstr "Dette er objektivbeskrivelsen funnet som en streng i bildets metadata. Den brukes til å spørre etter og finne relevant informasjon om objektivet fra Lensfun-databasen."
msgid "Chromatic aberration is easily recognized as color fringes towards the image corners. CA is due to a varying lens focus for different colors."
msgstr "Kromatisk aberrasjon kan lett gjenkjennes som utflytende farger mot bildets hjørner. Kromatisk aberrasjon skyldes at objektivet ikke bryter alle farger i samme brennpunkt."
msgid "Vignetting refers to an image darkening, mostly in the corners. Optical and natural vignetting can be canceled out with this option, whereas mechanical vignetting will not be cured."
msgstr "Vignettering vises ved skygger, mest i bildets utkant. Optisk og naturlig vignettering kan fjernes med dette valget. mens mekanisk vignettering ikke utbedres."
msgid "Distortion refers to an image deformation, which is most pronounced towards the corners. These Seidel aberrations are known as pincushion and barrel distortions."
msgstr "Med forvrengning menes det at bildet har gal form. Forvrengningen kommer sterkest til uttrykk nær hjørnene. Disse Seidel-forvrengningene er kjent som pute- og tønneforvrengning."
#| msgid "<b>Note: lens correction options depend of filters available in LensFun library. See <a href='http://lensfun.berlios.de'>LensFun project web site</a> for more information.</b>"
msgid "<b>Note: lens correction options depend of filters available in LensFun library. See <a href='http://lensfun.sourceforge.net'>LensFun project web site</a> for more information.</b>"
msgstr "<b>Merk: valg av objektivkorreksjoner avhenger av filtre som kan finnes i LensFun-biblioteket. Se <a href=\"http://lensfun.berlios.de\">LensFun-prosjektets nettsted</a> for mer informasjon.</b>"
"<p>If the image's maximal counts are small, you can use the <b>linear</b> scale.</p>"
"<p><b>Logarithmic</b> scale can be used when the maximal counts are big; if it is used, all values (small and large) will be visible on the graph.</p>"
msgstr ""
"<p>Velg histogramskala.</p>"
"<p>Hvis bildets maksimalverdier er små kan du bruke den <b>lineære</b>skalaen.</p>"
"<p>Bruk <b>logaritme</b>-skalaen når maksimalverdiene er store. Hvis du bruker denne, får alle verdier (små og store) plass i grafen.</p>"
msgid "Here you can see the target preview image histogram drawing of the selected image channel. This one is re-computed at any settings changes."
msgstr "Her ser du et histogram for valgt bildekanal for sluttresultatet du ser i forhåndsvisningsområdet. Histogrammet tegnes automatisk opp på nytt når du endrer innstillingene."
msgid "<b>Alpha</b>: display the alpha image-channel values. This channel corresponds to the transparency value and is supported by some image formats, such as PNG or TIF."
msgstr "<b>Gjennomsikt</b>: Vis verdier for gjennomsikts-kanalen (alfa-kanalen). Denne kanalen tilsvarer gjennomsiktsverdien og støttes av noen bildeformater som for eksempel PNG og TIF"
msgid "<b>Threshold</b>: Adjusts the threshold for denoising of the image in a range from 0.0 (none) to 10.0. The threshold is the value below which everything is considered noise."
msgstr "<b>Terskel</b>: Justerer terskelen for støyfjerning i bildet, fra 0.0 (ingen) til 10. Alt under terskelen blir betraktet som støy."
#. +> trunk5
#: core/libs/dimg/filters/nr/nrsettings.cpp:119
#, kde-format
msgid "<b>Softness</b>: This adjusts the softness of the thresholding (soft as opposed to hard thresholding). The higher the softness the more noise remains in the image."
msgstr "<b>Mykhet</b>: Dette justerer hvor myk terskelen er (my i motsetning til hard terskel). Jo høyere mykhet desto mer støy blir igjen i bildet."
#. +> trunk5
#: core/libs/dimg/filters/nr/nrsettings.cpp:125
#, kde-format
msgid "Estimate Noise"
msgstr "Anslå støy"
#. +> trunk5
#: core/libs/dimg/filters/nr/nrsettings.cpp:126
#, kde-format
msgid "Compute automatically all noise reduction settings by a parse of noise contained in image."
msgstr "Beregn automatisk alle innstillinger for støyreduksjon ved å gå gjennom støyen bildet inneholder."
#| msgid "This is the radius of the circular convolution. It is the most important parameter for using this plugin. For most images the default value of 1.0 should give good results. Select a higher value when your image is very blurred."
msgid "This is the radius of the circular convolution. It is the most important parameter for using this tool. For most images the default value of 1.0 should give good results. Select a higher value when your image is very blurred."
msgstr "Dette er radien til den sirkulære vridningen. Det er det viktigste parametret til dette programtillegget. Standardverdien på 1,0 skulle gi gode resultater for de fleste bilder. Velg en høyere verdi dersom bildet ditt er veldig slørete."
#| msgid "Increasing the correlation may help to reduce artifacts. The correlation can range from 0-1. Useful values are 0.5 and values close to 1, e.g. 0.95 and 0.99. Using a high value for the correlation will reduce the sharpening effect of the plugin."
msgid "Increasing the correlation may help to reduce artifacts. The correlation can range from 0-1. Useful values are 0.5 and values close to 1, e.g. 0.95 and 0.99. Using a high value for the correlation will reduce the sharpening effect of the tool."
msgstr "En økning i korrelasjonen kan hjelpe til å minske artefakter. Korrelasjonen kan gå fra 0-1. Nyttige verdier er 0,5 og verdier nær til 1, f. eks. 0,95 og 0,99. Bruker du en høyere verdi for korrelasjonen får du et mindre skarpt bilde."
#| msgid "Increasing the noise filter parameter may help to reduce artifacts. The noise filter can range from 0-1 but values higher than 0.1 are rarely helpful. When the noise filter value is too low, e.g. 0.0 the image quality will be very poor. A useful value is 0.01. Using a high value for the noise filter will reduce the sharpening effect of the plugin."
msgid "Increasing the noise filter parameter may help to reduce artifacts. The noise filter can range from 0-1 but values higher than 0.1 are rarely helpful. When the noise filter value is too low, e.g. 0.0 the image quality will be very poor. A useful value is 0.01. Using a high value for the noise filter will reduce the sharpening effect of the tool."
msgstr "Ved å stille verdien for støyfilter høyere kan du svekke artefakter. Støyfilteret kan stilles fra 0 til 1, men verdier høyere enn 0,1 hjelper sjelden. Hvis verdien er for lav, f.eks. 0.0 blir bildekvaliteten svært dårlig. 0,1 er en nyttig verdi. Hvis du bruker en for høy verdi minskes skarpheten."
msgid "This is the sharpness for the Gaussian convolution. Use this parameter when your blurring is of a Gaussian type. In most cases you should set this parameter to 0, because it causes nasty artifacts. When you use non-zero values, you will probably also have to increase the correlation and/or noise filter parameters."
msgstr "Dette er skarpheten for den gaussiske vridningen. Bruk denne innstillingen når uklarheten er av gaussisk art. For det meste skal du stille denne kontrollen til 0 fordi den fører til ekle artefakter. Hvis du bruker verdier høyere enn 0 må du sannsynligvis øke korrelasjonen og støyfilteret."
msgid "This parameter determines the size of the transformation matrix. Increasing the matrix width may give better results, especially when you have chosen large values for circular or Gaussian sharpness."
msgstr "Denne innstillingen bestemmer størrelsen på omformings-matrisen. Ved å øke matrisebredden kan du få et bedre resultat, særlig hvis du har valgt høye verdier for sirkulær eller gaussisk skarphet."
#| msgid "<font size='-1' color='red'><i>Warning: <a href='http://en.wikipedia.org/wiki/JPEG'>JPEG</a> is a lossy image compression format.</i></font>"
msgid "<font color='red'><i>Warning: <a href='http://en.wikipedia.org/wiki/JPEG'>JPEG</a> is a lossy image compression format.</i></font>"
msgstr "<font size='-1' color='red'><i>Advarsel: <a href='http://no.wikipedia.org/wiki/JPEG'>JPEG</a> gir tap av bildekvalitet ved komprimering!</i></font>"
#. +> trunk5
#: core/libs/dimg/loaders/jpegsettings.cpp:107
#, kde-format
msgid "Chroma subsampling:"
msgstr "Kroma subsampling:"
#. +> trunk5
#: core/libs/dimg/loaders/jpegsettings.cpp:110
#, kde-format
msgid "4:4:4 (best quality)"
msgstr ""
#. +> trunk5
#: core/libs/dimg/loaders/jpegsettings.cpp:111
#, kde-format
msgid "4:2:2 (good quality)"
msgstr ""
#. +> trunk5
#: core/libs/dimg/loaders/jpegsettings.cpp:112
#, kde-format
msgid "4:2:0 (low quality)"
msgstr ""
#. +> trunk5
#: core/libs/dimg/loaders/jpegsettings.cpp:113
#, kde-format
msgid "4:1:1 (low quality)"
msgstr ""
#. +> trunk5
#: core/libs/dimg/loaders/jpegsettings.cpp:114
#, kde-format
msgid ""
"<p>Chroma subsampling reduces file size by taking advantage of the eye's lesser sensitivity to color resolution. How perceptible the difference is depends on the image - large photos will generally show no difference, while sharp, down-scaled pixel graphics may lose fine color detail.</p>"
"<p><b>4:4:4</b> - No chroma subsampling, highest quality but lowest compression.</p>"
"<p><b>4:2:2</b> - Chroma halved horizontally, average compression, average quality.</p>"
"<p><b>4:2:0</b> - Chroma quartered in 2x2 blocks, high compression but low quality.</p>"
"<p><b>4:1:1</b> - Chroma quartered in 4x1 blocks, high compression but low quality.</p>"
"<p><b>JPEG</b>: output the processed image in JPEG format. This format will give smaller-sized files.</p>"
"<p><b>Warning: Due to the destructive compression algorithm, JPEG is a lossy quality format.</b></p>"
"<p><b>TIFF</b>: output the processed image in TIFF format. This generates large files, without losing quality. Image is compressed.</p>"
"<p><b>PNG</b>: output the processed image in PNG format. This generates large files, without losing quality. Image is compressed.</p>"
"<p><b>PPM</b>: output the processed image in PPM format. This generates the largest files, without losing quality. Image is not compressed.</p>"
msgstr ""
"<p>Her velger du hvilket format utdatafila skal ha:</p>"
"<p><b>JPEG</b>: Lagre det ferd……igbehandlede bildet i JPEG-formatet. Dette gir mindre filer. </p>"
"<p><b>Advarsel: På grunn av ødeleggende kompresjonsalgoritme fører JPEG-formatet til kvalitetstap.</b></p>"
"<p><b>TIFF</b>: Lagre det ferdigbehandlede bildet i TIFF-formatet. Dette gir store bilder, men bildekvaliteten forringes ikke. Bildet blir komprimert.</p>"
" "
"<p><b>PNG</b>: Lagre det ferdigbehandlede bildet i PNG-formatet. Dette gir store filer uten at bildekvaliteten forringes. Bildet blir komprimert.</p>"
"<p><b>PPM</b>: Lagre det ferdigbehandlede bildet i PPM-formatet. Dette gir de største filene, uten at bildekvaliteten forringes. Bildet blir ikke komprimert.</p>"
#| msgid "The database is not valid: the \"DBVersion\" setting does not exist. The current database schema version cannot be verified. Try to start with an empty database. "
msgid "The database is not valid: the \"DBFaceVersion\" setting does not exist. The current database schema version cannot be verified. Try to start with an empty database. "
msgstr "Databasen er ugyldig: Innstillingen «DBVersion» finnes ikke. Denne versjonen av databaseskjemaet kan ikke bekreftes. Prøv å starte med en tom database. "
#| msgid "The database has been used with a more recent version of digiKam and has been updated to a database schema which cannot be used with this version. (This means this digiKam version is too old, or the database format is too recent.) Please use the more recent version of digiKam that you used before. "
msgid "The database has been used with a more recent version of digiKam and has been updated to a database schema which cannot be used with this version. (This means this digiKam version is too old, or the database format is to recent.) Please use the more recent version of digiKam that you used before."
msgstr "Databasen har vært brukt av en nyere versjon av digiKam og er blitt oppdatert til et databaseskjema som ikke kan brukes av denne versjonen. (Det betyr at denne versjonen av digiKam er for gammel, eller at databaseformatet er for nytt. Benytt heller den tidligere versjonen av digiKam som du har brukt før. "
"Background color indicates the global image filter status, encompassing all filter settings from the right sidebar.\n"
"\n"
"NO COLOR: no filter is active, all items are visible.\n"
"RED: filtering is on, but no items match.\n"
"GREEN: filter(s) match(es) at least one item.\n"
"\n"
"Move mouse cursor over this text to see more details about active filters.\n"
"Press the Reset button from the right side to clear all filter settings.\n"
"Press the Settings button from the right side to open the filters panel."
msgstr ""
"Bakgrunnsfargen viser status for det globale bildefilteret, som omfatter alle alle filtre fra sidestolpen til høyre.\n"
"\n"
"INGEN FARGE: ingen filtre er aktive, alle elementer er synlige.\n"
"RØD: filtrering er på, men ingen elementer passer med filtrene.\n"
"GRØNN: minst ett element slippes gjennom filtrene.\n"
"\n"
"Flytt musepeker over denne teksten for å se fler detaljer om aktive filtre.\n"
"Trykk Tilbakestill-knappen fra høyre side for å tilbakestille alle filterinnstillinger.\n"
"Trykk Innstillinger-knappen fra høyre side for å åpne filter-ruta."
#. +> trunk5
#: core/libs/filters/filterstatusbar.cpp:96
#, kde-format
msgid "Reset all active filters"
msgstr "Tilbakestill alle aktive filtre"
#. +> trunk5
#: core/libs/filters/filterstatusbar.cpp:102
#, kde-format
msgid "Open filter settings panel"
msgstr "Åpne innstillingsruta for filtre"
#. +> trunk5
#: core/libs/filters/filterstatusbar.cpp:132
#, kde-format
msgid ""
"<br/>"
"<nobr><i>Text</i></nobr>"
msgstr ""
"<br/>"
"<nobr><i>Tekst</i></nobr>"
#. +> trunk5
#: core/libs/filters/filterstatusbar.cpp:137
#, kde-format
msgid ""
"<br/>"
"<nobr><i>Mime Type</i></nobr>"
msgstr ""
"<br/>"
"<nobr><i>Mime Type</i></nobr>"
#. +> trunk5
#: core/libs/filters/filterstatusbar.cpp:142
#, kde-format
msgid ""
"<br/>"
"<nobr><i>Geolocation</i></nobr>"
msgstr ""
"<br/>"
"<nobr><i>Geolokalisering</i></nobr>"
#. +> trunk5
#: core/libs/filters/filterstatusbar.cpp:147
#, kde-format
msgid ""
"<br/>"
"<nobr><i>Rating</i></nobr>"
msgstr ""
"<br/>"
"<nobr><i>Karakter</i></nobr>"
#. +> trunk5
#: core/libs/filters/filterstatusbar.cpp:152
#, kde-format
msgid ""
"<br/>"
"<nobr><i>Pick Labels</i></nobr>"
msgstr ""
"<br/>"
"<nobr><i>Velg etiketter</i></nobr>"
#. +> trunk5
#: core/libs/filters/filterstatusbar.cpp:157
#, kde-format
msgid ""
"<br/>"
"<nobr><i>Color Labels</i></nobr>"
msgstr ""
"<br/>"
"<nobr><i>Fargeetiketter</i></nobr>"
#. +> trunk5
#: core/libs/filters/filterstatusbar.cpp:162
#, kde-format
msgid ""
"<br/>"
"<nobr><i>Tags</i></nobr>"
msgstr ""
"<br/>"
"<nobr><i>Etiketter</i></nobr>"
#. +> trunk5
#: core/libs/filters/filterstatusbar.cpp:167
#, kde-format
msgid "<nobr><b>Active filters:</b></nobr>"
msgstr "<nobr><b>Aktive filtre:</b></nobr>"
#. +> trunk5
#: core/libs/filters/filterstatusbar.cpp:171
#, kde-format
msgid "<nobr><b>Active filter:</b></nobr>"
msgstr "<nobr><b>Aktivt filter:</b></nobr>"
#. +> trunk5
#: core/libs/filters/filterstatusbar.cpp:178
#, kde-format
msgid "No active filter"
msgstr "Ingen aktive filtre"
#. +> trunk5
#: core/libs/filters/filterstatusbar.cpp:187
#, kde-format
msgid "One active filter"
msgstr "Ett aktivt filtre"
#. +> trunk5
#: core/libs/filters/filterstatusbar.cpp:191
#, kde-format
msgid "1 active filter"
msgid_plural "%1 active filters"
msgstr[0] "1 aktivt filter"
msgstr[1] "%1 aktive filtre"
#. +> trunk5
#: core/libs/filters/geolocationfilter.cpp:37
#, kde-format
msgid "No geo filtering"
msgstr "Ingen geofiltrering"
#. +> trunk5
#: core/libs/filters/geolocationfilter.cpp:38
#, kde-format
msgid "Images with coordinates"
msgstr "Bilder med koordinater"
#. +> trunk5
#: core/libs/filters/geolocationfilter.cpp:39
#, kde-format
msgid "Images without coordinates"
msgstr "Bilder uten koordinater"
#. +> trunk5
#: core/libs/filters/geolocationfilter.cpp:41
#, kde-format
msgid "Filter by geolocation"
msgstr "Filtrer etter geolokalisering"
#. +> trunk5
#: core/libs/filters/geolocationfilter.cpp:42
#, kde-format
msgid "Select how geolocation should affect the images which are shown."
msgstr "Velg hvordan geolokalisering skal påvirke bildene som vises."
#. +> trunk5
#: core/libs/filters/mimefilter.cpp:36
#, kde-format
msgid "All Files"
msgstr "Alle filer"
#. +> trunk5
#: core/libs/filters/mimefilter.cpp:37
#: core/utilities/setup/album/setupmime.cpp:105
#, kde-format
msgid "Image Files"
msgstr "Bildefiler"
#. +> trunk5
#: core/libs/filters/mimefilter.cpp:38
#, kde-format
msgid "No RAW Files"
msgstr "Ingen RAW-filer"
#. +> trunk5
#: core/libs/filters/mimefilter.cpp:39
#, kde-format
msgid "JPEG Files"
msgstr "JPEG-filer"
#. +> trunk5
#: core/libs/filters/mimefilter.cpp:40
#, kde-format
msgid "PNG Files"
msgstr "PNG-filer"
#. +> trunk5
#: core/libs/filters/mimefilter.cpp:41
#, kde-format
msgid "TIFF Files"
msgstr "TIFF-filer"
#. +> trunk5
#: core/libs/filters/mimefilter.cpp:42
#, kde-format
msgid "DNG Files"
msgstr "BNG-filer"
#. +> trunk5
#: core/libs/filters/mimefilter.cpp:43
#, kde-format
msgid "RAW Files"
msgstr "RAW-filer"
#. +> trunk5
#: core/libs/filters/mimefilter.cpp:44
#: core/utilities/setup/album/setupmime.cpp:137
#, kde-format
msgid "Video Files"
msgstr "Videofiler"
#. +> trunk5
#: core/libs/filters/mimefilter.cpp:45
#: core/utilities/setup/album/setupmime.cpp:172
#, kde-format
msgid "Audio Files"
msgstr "Lydfiler"
#. +> trunk5
#: core/libs/filters/mimefilter.cpp:46
#, fuzzy, kde-format
#| msgid "Raster Graphics Quality"
msgid "Raster Graphics"
msgstr "Kvalitet på rastergrafikk"
#. +> trunk5
#: core/libs/filters/mimefilter.cpp:48
#, kde-format
msgid "Filter by file type"
msgstr "Filtrer på filtype"
#. +> trunk5
#: core/libs/filters/mimefilter.cpp:49
#, fuzzy, kde-format
#| msgid "Select the file types (MIME types) that you want shown. Note: \"Raster Files\" are formats from raster graphics editors, such as Photoshop, The Gimp, Krita, etc."
msgid "Select the file types (MIME types) that you want shown. Note: \"Raster Graphics\" are file formats from raster graphics editors, such as Photoshop, The Gimp, Krita, etc."
msgstr "Velg de typene (MIME-typer) du vil vise. Merk: «Rasterfiler» er formater fra rastergrafikk-programmer slik som Photoshop, Gimp, Krita osv. …"
#. +> trunk5
#: core/libs/filters/ratingfilter.cpp:75
#, kde-format
msgid "Select the rating value used to filter albums' contents. Use the context pop-up menu to set rating filter conditions."
msgstr "Velg karakteren som skal brukes for å filtrere albumers innhold. Bruk sprettoppmenyen for å stille inn filterbetingelsen."
#. +> trunk5
#: core/libs/filters/ratingfilter.cpp:173
#, kde-format
msgid "Rating greater than or equal to %1."
msgstr "Karakter større enn eller lik %1"
#. +> trunk5
#: core/libs/filters/ratingfilter.cpp:178
#, kde-format
msgid "Rating equal to %1."
msgstr "Karakter lik %1"
#. +> trunk5
#: core/libs/filters/ratingfilter.cpp:183
#, kde-format
msgid "Rating less than or equal to %1."
msgstr "Karakter mindre enn eller lik %1"
#. +> trunk5
#: core/libs/filters/ratingfilter.cpp:227
#, kde-format
msgid "Rating Filter Options"
msgstr "Valg for karakterfilter"
#. +> trunk5
#: core/libs/filters/ratingfilter.cpp:232
#, kde-format
msgid "Greater Than or Equals Condition"
msgstr "Større enn eller lik"
#. +> trunk5
#: core/libs/filters/ratingfilter.cpp:234
#, kde-format
msgid "Equals Condition"
msgstr "Er lik"
#. +> trunk5
#: core/libs/filters/ratingfilter.cpp:236
#, kde-format
msgid "Less Than or Equals Condition"
msgstr "Mindre enn eller lik"
#. +> trunk5
#: core/libs/filters/ratingfilter.cpp:239
#, kde-format
msgid "Exclude Items Without Rating"
msgstr ""
#. +> trunk5
#: core/libs/filters/textfilter.cpp:81
#, kde-format
msgid "Text quick filter (search)"
msgstr "Rask tekstfiltrering (søk)"
#. +> trunk5
#: core/libs/filters/textfilter.cpp:82
#, kde-format
msgid "Enter search patterns to quickly filter this view on item names, captions (comments), and tags"
msgstr "Her kan du legge inn søkebetingelser for en rask filtrering på navn, tekst (kommentarer) og etiketter"
#. +> trunk5
#: core/libs/filters/textfilter.cpp:86
#, kde-format
msgid "Text Search Fields"
msgstr "Tekstsøkefelter"
#. +> trunk5
#: core/libs/filters/textfilter.cpp:89
#, kde-format
msgid "Defines which fields to search for the text in."
msgstr "Bestemmer i hvilke felter det skal letes etter teksten."
#. +> trunk5
#: core/libs/filters/textfilter.cpp:92
#, kde-format
msgid "Item Name"
msgstr "Elementnavn"
#. +> trunk5
#: core/libs/filters/textfilter.cpp:94
#, kde-format
msgid "Item Title"
msgstr "Elementtittel"
#. +> trunk5
#: core/libs/filters/textfilter.cpp:96
#, kde-format
msgid "Item Comment"
msgstr "Elementkommentar"
#. +> trunk5
#: core/libs/filters/textfilter.cpp:98
#, kde-format
msgid "Tag Name"
msgstr "Etikettnavn"
#. +> trunk5
#: core/libs/filters/textfilter.cpp:100
#, kde-format
msgid "Album Name"
msgstr "Albumnavn"
#. +> trunk5
#: core/libs/filters/textfilter.cpp:102
#, kde-format
msgid "Item Aspect Ratio"
msgstr "Forholdet mellom høyde og bredde for elementet"
#. +> trunk5
#: core/libs/filters/textfilter.cpp:104
#, kde-format
msgid "Item Pixel Size"
msgstr "Pikselstørrelse for elementet"
#. +> trunk5
#: core/libs/filters/textfilter.cpp:107
#, kde-format
msgid "Clear All"
msgstr "Tøm alt"
#. +> trunk5
#: core/libs/iojobs/iojob.cpp:78
#, kde-format
msgid "File/Folder %1 does not exist anymore"
msgstr ""
#. +> trunk5
#: core/libs/iojobs/iojob.cpp:84
#, fuzzy, kde-format
#| msgid "Album does not exist"
msgid "Album %1 does not exist anymore"
msgstr "Albumet finnes ikke"
#. +> trunk5
#: core/libs/iojobs/iojob.cpp:94
#, fuzzy, kde-format
#| msgid "A file or folder named %1 already exists."
msgid "A file or folder named %1 already exists in %2"
msgstr "En fil eller mappe med navnet %1 finnes fra før."
#. +> trunk5
#: core/libs/iojobs/iojob.cpp:117
#, fuzzy, kde-format
#| msgid "Could not remove folder %1."
msgid "Could not move folder %1 to album %2"
msgstr "Klarte ikke fjerne mappa %1."
#. +> trunk5
#: core/libs/iojobs/iojob.cpp:125
#, kde-format
msgid "Could not move folder %1 to album %2. The folder %1 was copied as well to album %2"
msgstr ""
#. +> trunk5
#: core/libs/iojobs/iojob.cpp:136
#, kde-format
msgid "Could not move file %1 to album %2"
msgstr ""
#. +> trunk5
#: core/libs/iojobs/iojob.cpp:157
#, kde-format
msgid "Could not copy folder %1 to album %2"
msgstr ""
#. +> trunk5
#: core/libs/iojobs/iojob.cpp:168
#, kde-format
msgid "Could not copy file %1 to album %2"
msgstr ""
#. +> trunk5
#: core/libs/iojobs/iojob.cpp:210
#, fuzzy, kde-format
#| msgid "File %1 does not exist"
msgid "File/Folder %1 does not exist"
msgstr "Fant ikke fila %1"
#. +> trunk5
#: core/libs/iojobs/iojob.cpp:222
#, fuzzy, kde-format
#| msgid "Could not move collection:"
msgid "Could not move folder %1 to collection trash"
msgid "Enter the text used to create tags here. '/' can be used to create a hierarchy of tags. ',' can be used to create more than one hierarchy at the same time."
msgid "Here you can see the statistical results calculated from the selected histogram part. These values are available for all channels."
msgstr "Her kan du se de statistiske resultatene som er beregnet for det markerte området på histogrammet. Disse verdiene er tilgjengelige for alle kanalene."
"<para>If enabled, all RAW files will be decoded in 16-bit color depth using a linear gamma curve. To prevent dark picture rendering in the editor, it is recommended to use Color Management in this mode.</para>"
"<para>If disabled, all RAW files will be decoded in 8-bit color depth with a BT.709 gamma curve and a 99th-percentile white point. This mode is faster than 16-bit decoding.</para>"
msgstr ""
"<para>Hvis dette er slått på blir alle RAW-filer avkodet i 16-bit fargedybde ved bruk av en lineær gammakurve. Det anbefales å bruke Fargestyring i denne kjøremåten for å unngå mørk bildeopptegning i redigeringen.</para>"
"<para>Hvis dette er slått av blir alle RAWfiler avkodet i 8-bit fargedybde med gammakurve BT.709 og et hvitpunkt i 99-persentil. Denne kjøremåten er raskere enn 16-bit avkoding.</para>"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:252
#, kde-format
msgctxt "@option:check"
msgid "Interpolate RGB as four colors"
msgstr "Interpoler RGB som fire farger"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:253
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Interpolate RGB as four colors</title>"
"<para>The default is to assume that all green pixels are the same. If even-row green pixels are more sensitive to ultraviolet light than odd-row this difference causes a mesh pattern in the output; using this option solves this problem with minimal loss of detail.</para>"
"<para>To resume, this option blurs the image a little, but it eliminates false 2x2 mesh patterns with VNG quality method or mazes with AHD quality method.</para>"
msgstr ""
"<title>Interpoler RGB som fire farger</title>"
"<para> Standard er å anta at alle grønne piksler er like. Hvis grønne piksler i partallsrader er mer følsomme for ultrafiolett lys enn oddetallsrader gir denne forskjellen et gittermønster i utdata. Dette valget løser dette problemet med minimalt tap av detaljer.</para>"
"<para> Dette valget slører altså bildet litt, men eliminerer falske 2x2 gittermønster med VNG-kvalitetsmetoden eller labyrinter med AHD-kvalitetsmetoden.</para>"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:267
#, kde-format
msgctxt "@info:tooltip"
msgid "Visit LibRaw project website"
msgstr "Besøk nettstedet til LibRaw-prosjektet"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:277
#, kde-format
msgctxt "@option:check"
msgid "Do not stretch or rotate pixels"
msgstr "Ikke strekk eller roter piksler"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:279
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Do not stretch or rotate pixels</title>"
"<para>For Fuji Super CCD cameras, show the image tilted 45 degrees. For cameras with non-square pixels, do not stretch the image to its correct aspect ratio. In any case, this option guarantees that each output pixel corresponds to one RAW pixel.</para>"
msgstr ""
"<title>Ikke strekk eller roter piksler</title>"
"<para>For Fuji Super CCD-kameraer vises bildet vippet 45 grader. For kameraer med ikke-kvadratiske piksler strekkes ikke bildet til riktig høyde/breddeforhold. I alle tilfeller garanterer dette valget at hvert piksel i utdata tilsvarer ett RAW-piksel.</para>"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:287
#, kde-format
msgctxt "@label:listbox"
msgid "Quality:"
msgstr "Kvalitet:"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:291
#, kde-format
msgctxt "@item:inlistbox Quality"
msgid "Bilinear"
msgstr "Bilineær"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:292
#, kde-format
msgctxt "@item:inlistbox Quality"
msgid "VNG"
msgstr "VNG"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:293
#, kde-format
msgctxt "@item:inlistbox Quality"
msgid "PPG"
msgstr "PPG"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:294
#, kde-format
msgctxt "@item:inlistbox Quality"
msgid "AHD"
msgstr "AHD"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:295
#, kde-format
msgctxt "@item:inlistbox Quality"
msgid "DCB"
msgstr "DCB"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:296
#, fuzzy, kde-format
#| msgid "DHT"
msgctxt "@item:inlistbox Quality"
msgid "DHT"
msgstr "DHT"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:297
#, kde-format
msgctxt "@item:inlistbox Quality"
msgid "AAHD"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:301
#, fuzzy, kde-kuit-format
#| msgctxt "@info:whatsthis"
#| msgid ""
#| "<title>Quality (interpolation)</title>"
#| "<para>Select here the demosaicing method to use when decoding RAW images. A demosaicing algorithm is a digital image process used to interpolate a complete image from the partial raw data received from the color-filtered image sensor, internal to many digital cameras, in form of a matrix of colored pixels. Also known as CFA interpolation or color reconstruction, another common spelling is demosaicing. The following methods are available for demosaicing RAW images:</para>"
#| "<para>"
#| "<list>"
#| "<item><emphasis strong='true'>Bilinear</emphasis>: use high-speed but low-quality bilinear interpolation (default - for slow computers). In this method, the red value of a non-red pixel is computed as the average of the adjacent red pixels, and similarly for blue and green.</item>"
#| "<item><emphasis strong='true'>VNG</emphasis>: use Variable Number of Gradients interpolation. This method computes gradients near the pixel of interest and uses the lower gradients (representing smoother and more similar parts of the image) to make an estimate.</item>"
#| "<item><emphasis strong='true'>PPG</emphasis>: use Patterned-Pixel-Grouping interpolation. Pixel Grouping uses assumptions about natural scenery in making estimates. It has fewer color artifacts on natural images than the Variable Number of Gradients method.</item>"
#| "<item><emphasis strong='true'>AHD</emphasis>: use Adaptive Homogeneity-Directed interpolation. This method selects the direction of interpolation so as to maximize a homogeneity metric, thus typically minimizing color artifacts.</item>"
#| "<item><emphasis strong='true'>DCB</emphasis>: DCB interpolation from linuxphoto.org project.</item>"
#| "<item><emphasis strong='true'>AHD v2</emphasis>: modified AHD interpolation using Variance of Color Differences method.</item>"
#| "<item><emphasis strong='true'>AFD</emphasis>: Adaptive Filtered Demosaicing interpolation through 5 pass median filter from PerfectRaw project.</item>"
#| "<item><emphasis strong='true'>VCD</emphasis>: Variance of Color Differences interpolation.</item>"
#| "<item><emphasis strong='true'>VCD & AHD</emphasis>: Mixed demosaicing between VCD and AHD.</item>"
#| "<item><emphasis strong='true'>LMMSE</emphasis>: color demosaicing via directional linear minimum mean-square error estimation interpolation from PerfectRaw.</item>"
#| "<item><emphasis strong='true'>AMaZE</emphasis>: Aliasing Minimization interpolation and Zipper Elimination to apply color aberration removal from RawTherapee project.</item>"
#| "</list>"
#| "</para>"
#| "<para>Note: some methods can be unavailable if RAW decoder have been built without extension packs.</para>"
msgctxt "@info:whatsthis"
msgid ""
"<title>Quality (interpolation)</title>"
"<para>Select here the demosaicing method to use when decoding RAW images. A demosaicing algorithm is a digital image process used to interpolate a complete image from the partial raw data received from the color-filtered image sensor, internal to many digital cameras, in form of a matrix of colored pixels. Also known as CFA interpolation or color reconstruction, another common spelling is demosaicing. The following methods are available for demosaicing RAW images:</para>"
"<para>"
"<list>"
"<item><emphasis strong='true'>Bilinear</emphasis>: use high-speed but low-quality bilinear interpolation (default - for slow computers). In this method, the red value of a non-red pixel is computed as the average of the adjacent red pixels, and similarly for blue and green.</item>"
"<item><emphasis strong='true'>VNG</emphasis>: use Variable Number of Gradients interpolation. This method computes gradients near the pixel of interest and uses the lower gradients (representing smoother and more similar parts of the image) to make an estimate.</item>"
"<item><emphasis strong='true'>PPG</emphasis>: use Patterned-Pixel-Grouping interpolation. Pixel Grouping uses assumptions about natural scenery in making estimates. It has fewer color artifacts on natural images than the Variable Number of Gradients method.</item>"
"<item><emphasis strong='true'>AHD</emphasis>: use Adaptive Homogeneity-Directed interpolation. This method selects the direction of interpolation so as to maximize a homogeneity metric, thus typically minimizing color artifacts.</item>"
"<item><emphasis strong='true'>DCB</emphasis>: DCB interpolation from linuxphoto.org project.</item>"
"<item><emphasis strong='true'>DHT</emphasis>: DHT interpolation.See https://www.libraw.org/node/2306 for details.</item>"
"<item><emphasis strong='true'>AAHD</emphasis>: modified AHD interpolation.</item>"
"</list>"
"</para>"
msgstr ""
"<title>Kvalitet (interpolering)</title>"
"<para>Velg her interpoleringsmetode for invers mosaikk-operasjon på RAW-bildeavkoding. En algoritme for invers mosaikk er en digital bildeprosess som brukes til å interpolere et komplett bilde ut fra delvise rådata som mottas fra den fargefiltrerte bildesensoren inni mange digitalkameraer i form av en matrise av fargepiksler. Invers mosaikk-operasjon kalles også CFA-interpolasjon eller fargerekonstruksjon. Se nedenfor metoder til invers mosaikk-operasjon på RAW-bilder:</para>"
"<para> "
"<list>"
"<item><emphasis strong='true'>Bilineær</emphasis>: bruk bilineær interpolasjon, som er rask men gir lav kvalitet (standard for langsomme maskiner). Med denne metoden beregnes rød-verdien for et ikke-rødt piksel som gjennomsnittet av røde nabopiksler, tilsvarende for blått og grønt.</item>"
"<item><emphasis strong='true'>VNG</emphasis>: bruk interpolasjon med variabelt antall gradienter. Denne metoden beregner gradienter nær pikslet som betraktes og bruker lavere gradienter, som representerer jevnere og mer liknende områder i bildet, til å lage et estimat.</item>"
"<item><emphasis strong='true'>PPG</emphasis>: bruk «Patterned Pixel Grouping»-interpolasjon. Pikselgruppering bruker antakelser om naturbilder til å lage estimater. Det gir færre fargeartefakter på naturbilder enn metoden med variable gradienter.</item>"
"<item><emphasis strong='true'>AHD</emphasis>: bruk adaptiv homogenitet-rettet interpolasjon. Denne metoden velger interpolasjonsretning slik at den maksimerer et homogenitetsmål, og derved minimerer fargeartefakter.</item>"
"<item><emphasis strong='true'>DCB</emphasis>: DCB-interpolasjon from prosjektet linuxphoto.org.</item>"
"<item><emphasis strong='true'>AHD v2</emphasis>: modifisert AHD-interpolasjon ved bruk av metoden Variance of Color Differences.</item>"
"<item><emphasis strong='true'>AFD</emphasis>: Adaptive Filtered Demosaicing interpolasjon gjennom et 5-pass medianfilter fra PerfectRaw-e.</item>"
"<item><emphasis strong='true'>VCD</emphasis>: Variance of Color Differences-interpolasjon.</item>"
"<item><emphasis strong='true'>VCD & AHD</emphasis>: Blandet mosaikkfjerning mellom VCD og AHD.</item>"
"<item><emphasis strong='true'>LMMSE</emphasis>: fargemosaikkfjerning via retningsbestemt «linear minimum mean square-error» anslagsinterpolasjon fra PerfectRaw.</item>"
"<item><emphasis strong='true'>AMaZE</emphasis>: Aliasing Minimization interpolasjon og Zipper-Eliminering som fjerner fargeavvik, fra prosjektet RawTherapee project.</item>"
"</list>"
" </para>"
" "
"<para>Merk: noen metoder kan være utilgjengelige hvis RAW-avkoderen er bygget uten utvidelsespakker.</para>"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:349
#, kde-format
msgctxt "@label:slider"
msgid "Pass:"
msgstr "Pass:"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:350
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Pass</title>"
"<para>Set here the passes used by the median filter applied after interpolation to Red-Green and Blue-Green channels.</para>"
"<para>This setting is only available for specific Quality options: <emphasis strong='true'>Bilinear</emphasis>, <emphasis strong='true'>VNG</emphasis>, <emphasis strong='true'>PPG</emphasis>, <emphasis strong='true'>AHD</emphasis>, <emphasis strong='true'>DCB</emphasis>, and <emphasis strong='true'>VCD & AHD</emphasis>.</para>"
msgstr ""
"<title>Pass</title>"
"<para>Angi her passene som medianfilteret bruker etter interpolasjon til Rød-Grønn og Blå-Grønn-kanaler.</para>"
"<para>Denne innstillingen er bare tilgjengelig for spesielle Kvalitet-valg:<emphasis strong='true'>Bilineær</emphasis>, <emphasis strong='true'>VNG</emphasis>, <emphasis strong='true'>PPG</emphasis>, <emphasis strong='true'>AHD</emphasis>, <emphasis strong='true'>DCB</emphasis> og <emphasis strong='true'>VCD & AHD</emphasis>.</para>"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:362
#, kde-format
msgctxt "@option:check"
msgid "Refine interpolation"
msgstr "Forbedre interpolasjon"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:363
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Refine interpolation</title>"
"<para>This setting is available only for few Quality options:</para>"
"<para>"
"<list>"
"<item><emphasis strong='true'>DCB</emphasis>: turn on the enhance interpolated colors filter.</item>"
"<item><emphasis strong='true'>VCD & AHD</emphasis>: turn on the enhanced effective color interpolation (EECI) refine to improve sharpness.</item>"
"</list>"
"</para>"
msgstr ""
"<title>Forbedre interpolasjon</title>"
"<para>Denne innstillingen er bare mulig for spesielle Kvalitet-valg:</para>"
"<para> "
"<list> "
"<item><emphasis strong='true'>DCB</emphasis>: slå på filteret som forbedrer interpolerte farger.</item>"
"<item><emphasis strong='true'>VCD & AHD</emphasis>: slå på forbedret effektiv fargeinterpolering (EECI) for å forbedre skarphet. </item>"
"</list>"
"</para>"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:376
#, kde-format
msgctxt "@label"
msgid "Demosaicing"
msgstr "Mosaikkfjerning"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:384
#, kde-format
msgctxt "@label:listbox"
msgid "Method:"
msgstr "Metode:"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:386
#, kde-format
msgctxt "@item:inlistbox"
msgid "Default D65"
msgstr "Standard D65"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:387
#, kde-format
msgctxt "@item:inlistbox"
msgid "Camera"
msgstr "Kamera"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:388
#, kde-format
msgctxt "@item:inlistbox set while balance automatically"
msgid "Automatic"
msgstr "Automatisk"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:389
#, kde-format
msgctxt "@item:inlistbox set white balance manually"
msgid "Manual"
msgstr "Manuelt"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:391
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>White Balance</title>"
"<para>Configure the raw white balance:</para>"
"<para>"
"<list>"
"<item><emphasis strong='true'>Default D65</emphasis>: Use a standard daylight D65 white balance.</item>"
"<item><emphasis strong='true'>Camera</emphasis>: Use the white balance specified by the camera. If not available, reverts to default neutral white balance.</item>"
"<item><emphasis strong='true'>Automatic</emphasis>: Calculates an automatic white balance averaging the entire image.</item>"
"<item><emphasis strong='true'>Manual</emphasis>: Set a custom temperature and green level values.</item>"
"</list>"
"</para>"
msgstr ""
"<title>Hvitbalanse</title>"
"<para>Sett opp RAW hvitbalanse:</para>"
" "
"<para> "
"<list>"
"<item><emphasis strong='true'>Standard D65 hvitbalanse</emphasis>: Bruk en standard dagslys D65 hvitbalanse.</item>"
"<item><emphasis strong='true'>Kamera</emphasis>: Bruk hvitbalansen som kameraet oppgir. Hvis dette ikke finnes,faller dcraw tilbake til standard nøytral hvitbalanse.</item>"
"<item><emphasis strong='true'>Automatisk</emphasis>: Beregner en automatisk hvitbalanse med gjennomsnitt over hele bildet. </item>"
"<item><emphasis strong='true'>Manuelt</emphasis>: Oppgi selvvalgt temperatur og verdi på grønn-nivået.</item>"
" </list>"
" </para>"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:406
#, kde-format
msgctxt "@label:slider"
msgid "T(K):"
msgstr "T(K):"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:407
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Temperature</title>"
"<para>Set here the color temperature in Kelvin.</para>"
msgstr ""
"<title>Temperatur</title>"
"<para>Oppgi her fargetemperaturen i Kelvin.</para>"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:414
#, kde-format
msgctxt "@label:slider Green component"
msgid "Green:"
msgstr "Grønn:"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:415
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid "<para>Set here the green component to set magenta color cast removal level.</para>"
msgstr "<para>Her stiller du inn grønnkomponenten for å bestemme i hvilken grad anstrøket av magenta skal fjernes.</para>"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:418
#, kde-format
msgctxt "@label:listbox"
msgid "Highlights:"
msgstr "Høylys:"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:420
#, kde-format
msgctxt "@item:inlistbox"
msgid "Solid white"
msgstr "Ensfarget hvitt"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:421
#, kde-format
msgctxt "@item:inlistbox"
msgid "Unclip"
msgstr "Uklippet"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:422
#, kde-format
msgctxt "@item:inlistbox"
msgid "Blend"
msgstr "Flett"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:423
#, kde-format
msgctxt "@item:inlistbox"
msgid "Rebuild"
msgstr "Gjenoppbygg"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:425
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Highlights</title>"
"<para>Select here the highlight clipping method:</para>"
"<para>"
"<list>"
"<item><emphasis strong='true'>Solid white</emphasis>: clip all highlights to solid white</item>"
"<item><emphasis strong='true'>Unclip</emphasis>: leave highlights unclipped in various shades of pink</item>"
"<item><emphasis strong='true'>Blend</emphasis>:Blend clipped and unclipped values together for a gradual fade to white</item>"
"<item><emphasis strong='true'>Rebuild</emphasis>: reconstruct highlights using a level value</item>"
"</list>"
"</para>"
msgstr ""
"<title>Høylys</title>"
"<para>Velg her metode for klipping av høylys:</para>"
" "
"<para> "
"<list>"
"<item><emphasis strong='true'>Ensfarget hvitt</emphasis>: klipp alle høylys til ensfarget hvitt</item>"
"<item><emphasis strong='true'>Uklippet</emphasis>: la høylysene være uklippet i forskjellige rosa-toner</item>"
"<item><emphasis strong='true'>Flett</emphasis>: Flett sammen klippede og uklippede verdier for å gi en gradvis overgang til hvitt </item>"
"<item><emphasis strong='true'>Gjenoppbygg</emphasis>: bygg opp høylysene på nytt med bruk av en nivåverdi</item>"
"<para>Specify the reconstruct highlight level. Low values favor whites and high values favor colors.</para>"
msgstr ""
"<title>Nivå</title>"
"<para>Oppgi nivå for gjenoppbygging av høylys. Lave verdier vekter mot hvitt og høye verdier vekter mot farger.</para>"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:444
#, kde-format
msgctxt "@option:check"
msgid "Exposure Correction (E.V)"
msgstr "Eksponeringskorreksjon (E.V)"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:445
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid "<para>Turn on the exposure correction before interpolation.</para>"
msgstr "<para>Slå på eksponeringskorreksjon før interpolasjon.</para>"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:448
#, kde-format
msgctxt "@label:slider"
msgid "Linear Shift:"
msgstr "Lineær shift:"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:453
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Shift</title>"
"<para>Linear Shift of exposure correction before interpolation in E.V</para>"
msgstr ""
"<title>Shift</title>"
"<para>Lineær shift for eksponeringskorreksjon før interpolasjon i E.V.</para>"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:456
#, kde-format
msgctxt "@label:slider"
msgid "Highlight:"
msgstr "Høylys:"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:461
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Highlight</title>"
"<para>Amount of highlight preservation for exposure correction before interpolation in E.V. Only take effect if Shift Correction is > 1.0 E.V</para>"
msgstr ""
"<title>Høylys</title>"
"<para>Hvor mye høylys skal bevares ved eksponeringskorreksjon før interpolasjon i E.V. Får bare virkning hvis Shift-korreksjonen er > 1.0 E.V</para>"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:465
#, kde-format
msgctxt "@option:check"
msgid "Correct false colors in highlights"
msgstr "Korriger fargefeil i høylys"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:466
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid "<para>If enabled, images with overblown channels are processed much more accurately, without 'pink clouds' (and blue highlights under tungsten lamps).</para>"
msgstr "<para>Hvis dette er slått på vil bilder med oppblåste kanaler behandlet mye mer nøyaktig, uten «lyserøde skyer» (og blå høylys under glødelamper).</para>"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:470
#, kde-format
msgctxt "@option:check"
msgid "Auto Brightness"
msgstr "Autolysstyrke"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:471
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid "<para>If disable, use a fixed white level and ignore the image histogram to adjust brightness.</para>"
msgstr "<para>Hvis slått av, så bruk et fast hvittnivå og ignorer bildehistogrammet for å justere lysstyrken.</para>"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:474
#, kde-format
msgctxt "@label:slider"
msgid "Brightness:"
msgstr "Lysstyrke:"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:479
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Brightness</title>"
"<para>Specify the brightness level of output image. The default value is 1.0 (works in 8-bit mode only).</para>"
msgstr ""
"<title>Lysstyrke</title>"
"<para>Oppgi lysstyrkenivå for resultatbildet. Standardverdi er 1.0 (virker bare i 8-bit modus).</para>"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:489
#, kde-format
msgctxt "@option:check Black point"
msgid "Black:"
msgstr "Svart:"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:490
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Black point</title>"
"<para>Use a specific black point value to decode RAW pictures. If you set this option to off, the Black Point value will be automatically computed.</para>"
msgstr ""
"<title>Svart punkt</title>"
"<para>Bruk en bestemt svartpunktverdi for å avkode RAW-bilder. Hvis dette er slått av blir svartpunktverdien beregnet automatisk.</para>"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:497
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Black point value</title>"
"<para>Specify specific black point value of the output image.</para>"
msgstr ""
"<title>Svartpunktverdi</title>"
"<para>Oppgi svartpunktverdi for resultatbildet.</para>"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:500
#, kde-format
msgctxt "@option:check White point"
msgid "White:"
msgstr "Hvit:"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:501
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>White point</title>"
"<para>Use a specific white point value to decode RAW pictures. If you set this option to off, the White Point value will be automatically computed.</para>"
msgstr ""
"<title>Hvitt punkt</title>"
"<para>Bruk en bestemt hvitpunktverdi for å avkode RAW-bilder. Hvis dette er slått av blir hvitpunktverdien beregnet automatisk.</para>"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:508
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>White point value</title>"
"<para>Specify specific white point value of the output image.</para>"
msgstr ""
"<title>Hvitpunktverdi</title>"
"<para>Oppgi hvitpunktverdi for resultatbildet.</para>"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:547
#, kde-format
msgctxt "@label"
msgid "White Balance"
msgstr "Hvitbalanse"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:555
#, kde-format
msgctxt "@label:listbox"
msgid "Noise reduction:"
msgstr "Støyreduksjon:"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:557
#, kde-format
msgctxt "@item:inlistbox Noise Reduction"
msgid "None"
msgstr "Ingen"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:558
#, kde-format
msgctxt "@item:inlistbox Noise Reduction"
msgid "Wavelets"
msgstr "Wavelets"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:559
#, kde-format
msgctxt "@item:inlistbox Noise Reduction"
msgid "FBDD"
msgstr "FBDD"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:561
#, fuzzy, kde-kuit-format
#| msgctxt "@info:whatsthis"
#| msgid ""
#| "<title>Noise Reduction</title>"
#| "<para>Select here the noise reduction method to apply during RAW decoding.</para>"
#| "<para>"
#| "<list>"
#| "<item><emphasis strong='true'>None</emphasis>: no noise reduction.</item>"
#| "<item><emphasis strong='true'>Wavelets</emphasis>: wavelets correction to erase noise while preserving real detail. It's applied after interpolation.</item>"
#| "<item><emphasis strong='true'>FBDD</emphasis>: Fake Before Demosaicing Denoising noise reduction. It's applied before interpolation.</item>"
#| "<item><emphasis strong='true'>CFA Line Denoise</emphasis>: Banding noise suppression. It's applied after interpolation.</item>"
"<para>Select here the noise reduction method to apply during RAW decoding.</para>"
"<para>"
"<list>"
"<item><emphasis strong='true'>None</emphasis>: no noise reduction.</item>"
"<item><emphasis strong='true'>Wavelets</emphasis>: wavelets correction to erase noise while preserving real detail. It is applied after interpolation.</item>"
"<item><emphasis strong='true'>FBDD</emphasis>: Fake Before Demosaicing Denoising noise reduction. It is applied before interpolation.</item>"
"</list>"
"</para>"
msgstr ""
"<title>Støyreduksjon</title>"
"<para>Velg her støyreduksjonsmetode som skal brukes under RAW-avkoding.</para>"
" "
"<para> "
"<list>"
"<item><emphasis strong='true'>Ingen</emphasis>: ingen støyreduksjon.</item>"
"<item><emphasis strong='true'>Wavelets</emphasis>: wavelet-korrigering for å viske ut støy mens virkelige detaljer bevares. Det brukes etter interpolasjon.</item>"
"<item><emphasis strong='true'>FBDD</emphasis>: Fake Before Demosaicing Denoising, denne støyreduksjonen brukes før interpolasjon. </item>"
"<item><emphasis strong='true'>CFA linjestøyfjerning</emphasis>: Båndvis støyfjerning. Den brukes etter interpolasjon.</item>"
"<item><emphasis strong='true'>Impuls-støyfjerning</emphasis>: Impuls-støyfjerning, brukes etter interpolasjon.</item>"
" </list>"
"</para>"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:586
#, kde-format
msgctxt "@label"
msgid "Corrections"
msgstr "Korreksjoner"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:594
#, kde-format
msgctxt "@label:listbox"
msgid "Camera Profile:"
msgstr "Kameraprofil:"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:596
#, kde-format
msgctxt "@item:inlistbox Camera Profile"
msgid "None"
msgstr "Ingen"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:597
#, kde-format
msgctxt "@item:inlistbox Camera Profile"
msgid "Embedded"
msgstr "Innebygd"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:598
#, kde-format
msgctxt "@item:inlistbox Camera Profile"
msgid "Custom"
msgstr "Selvvalgt"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:600
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Camera Profile</title>"
"<para>Select here the input color space used to decode RAW data.</para>"
"<para>"
"<list>"
"<item><emphasis strong='true'>None</emphasis>: no input color profile is used during RAW decoding.</item>"
"<item><emphasis strong='true'>Embedded</emphasis>: use embedded color profile from RAW file, if it exists.</item>"
"<item><emphasis strong='true'>Custom</emphasis>: use a custom input color space profile.</item>"
"</list>"
"</para>"
msgstr ""
"<title>Kameraprofil</title>"
"<para>Velg her fargerom for inndata som brukes til å avkode RAW-data.</para>"
" "
"<para> "
"<list>"
"<item><emphasis strong='true'>Intet</emphasis>: det brukes ingen inndata-fargeprofil under avkoding.</item>"
"<item><emphasis strong='true'>Innebygget</emphasis>: bruk innebygget fargeprofil fra RAW-fila om den finnes.</item>"
"<item><emphasis strong='true'>Selvvalgt</emphasis>: bruk et selvvalgt fargerom for inndata.</item>"
" </list>"
" </para>"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:611
#: core/libs/rawengine/drawdecoderwidget.cpp:645
#, fuzzy, kde-format
#| msgid "ICC Files (*.icc; *.icm)"
msgid "ICC Files (*.icc *.icm)"
msgstr "ICC-filer (*.icc;*.icm)"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:613
#, kde-format
msgctxt "@label:listbox"
msgid "Workspace:"
msgstr "Arbeidsrom:"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:615
#, kde-format
msgctxt "@item:inlistbox Workspace"
msgid "Raw (no profile)"
msgstr "Raw (ingen profil)"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:616
#, kde-format
msgctxt "@item:inlistbox Workspace"
msgid "sRGB"
msgstr "sRGB"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:617
#, kde-format
msgctxt "@item:inlistbox Workspace"
msgid "Adobe RGB"
msgstr "Adobe RGB"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:618
#, kde-format
msgctxt "@item:inlistbox Workspace"
msgid "Wide Gamut"
msgstr "Bredt område"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:619
#, kde-format
msgctxt "@item:inlistbox Workspace"
msgid "Pro-Photo"
msgstr "Pro-Photo"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:620
#, kde-format
msgctxt "@item:inlistbox Workspace"
msgid "Custom"
msgstr "Selvvalgt"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:622
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Workspace</title>"
"<para>Select here the output color space used to decode RAW data.</para>"
"<para>"
"<list>"
"<item><emphasis strong='true'>Raw (linear)</emphasis>: in this mode, no output color space is used during RAW decoding.</item>"
"<item><emphasis strong='true'>sRGB</emphasis>: this is an RGB color space, created cooperatively by Hewlett-Packard and Microsoft. It is the best choice for images destined for the Web and portrait photography.</item>"
"<item><emphasis strong='true'>Adobe RGB</emphasis>: this color space is an extended RGB color space, developed by Adobe. It is used for photography applications such as advertising and fine art.</item>"
"<item><emphasis strong='true'>Wide Gamut</emphasis>: this color space is an expanded version of the Adobe RGB color space.</item>"
"<item><emphasis strong='true'>Pro-Photo</emphasis>: this color space is an RGB color space, developed by Kodak, that offers an especially large gamut designed for use with photographic outputs in mind.</item>"
"<item><emphasis strong='true'>Custom</emphasis>: use a custom output color space profile.</item>"
"</list>"
"</para>"
msgstr ""
"<title>Arbeidsrom</title>"
"<para>Velg her resultatfargerom som skal brukes til å avkode RAW-data.</para>"
" "
"<para> "
"<list>"
"<item><emphasis strong='true'>Rå (lineær)</emphasis>: på denne måten brukes ikke noe fargerom under avkoding.</item>"
"<item><emphasis strong='true'>sRGB</emphasis>: dette er et RGB-fargerom laget i samarbeid av Hewlett-Packard og Microsoft. Det er det beste valget for bilder som skal vises på veven og for portrettfotografi.</item>"
"<item><emphasis strong='true'>Adobe RGB</emphasis>: dette er et utvidet RGB-fargerom som er utviklet av Adobe. Det brukes til kunstfotografering og reklamefoto.</item>"
"<item><emphasis strong='true'>Bredt område</emphasis>: dette fargerommet er en utvidet versjon av fargerommet Adobe RGB.</item>"
"<item><emphasis strong='true'>Pro-Photo</emphasis>: dette er et RGB-fargerom utviklet av Kodak, som tilbyr et ekstra bredt område laget med tanke på bruk med fotografi.</item>"
"<item><emphasis strong='true'>Egendefinert</emphasis>: bruk et egendefinert resultatfargerom.</item>"
" </list>"
"</para>"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:657
#, kde-format
msgctxt "@label"
msgid "Color Management"
msgstr "Fargestyring"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:850
#, kde-format
msgctxt "@label"
msgid "Threshold:"
msgstr "Terskel:"
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:851
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Threshold</title>"
"<para>Set here the noise reduction threshold value to use.</para>"
msgstr ""
"<title>Terskel:</title>"
"<para>Oppgi her terskelverdi som skal brukes under støyreduksjon.</para>"
"<li>Hvis et etikett-tre begynner med «/», så brukes albumet til etikettroten som rot. </li>"
"</ul>"
" </p>"
#. +> trunk5
#: core/libs/tags/widgets/tageditdlg.cpp:230
#, kde-format
msgid "<p><b>Note</b>: this shortcut can be used to assign or unassign tag to items.</p>"
msgstr "<p><b>Merk:</b> denne snarveien kan brukes til å tilordne eller fraordne etikett til elementer.</p>"
#. +> trunk5
#: core/libs/tags/widgets/tageditdlg.cpp:345
#, kde-format
msgid "<b>Create New Tag</b>"
msgstr "<b>Lag ny etikett</b>"
#. +> trunk5
#: core/libs/tags/widgets/tageditdlg.cpp:349
#, kde-format
msgid ""
"<b>Create New Tag in<br/>"
"\"%1\"</b>"
msgstr ""
"<b>Lag ny etikett i <br/>"
"«%1»</b>"
#. +> trunk5
#: core/libs/tags/widgets/tageditdlg.cpp:355
#, kde-format
msgid ""
"<b>Properties of Tag<br/>"
"\"%1\"</b>"
msgstr ""
"<b>Egenskaper til etikett <br/>"
"«%1»</b> "
#. +> trunk5
#: core/libs/tags/widgets/tageditdlg.cpp:523
#, kde-format
msgid "Tag creation Error"
msgstr "Feil under oppretting av etikett"
#. +> trunk5
#: core/libs/tags/widgets/tageditdlg.cpp:534
#, kde-format
msgid "An error occurred during tag creation:"
msgstr "Feil oppsto mens en etikett ble opprettet:"
#. +> trunk5
#: core/libs/tags/widgets/tageditdlg.cpp:536
#, kde-format
msgid "Tag Path"
msgstr "Etikettsti"
#. +> trunk5
#: core/libs/tags/widgets/tagfolderview.cpp:129
#: core/libs/tags/widgets/tagfolderview.cpp:296
#, kde-format
msgid "Collapse Selected Recursively"
msgstr "Fold sammen markerte rekursivt"
#. +> trunk5
#: core/libs/tags/widgets/tagfolderview.cpp:291
#, kde-format
msgid "Expand Selected Recursively"
msgstr "Fold ut markerte rekursivt"
#. +> trunk5
#: core/libs/tags/widgets/tagspopupmenu.cpp:530
#, kde-format
msgid "Recently Assigned Tags"
msgstr "Nylig tilordnede etiketter"
#. +> trunk5
#: core/libs/tags/widgets/tagspopupmenu.cpp:586
#: core/libs/tags/widgets/tagspopupmenu.cpp:724
#, kde-format
msgid "Add New Tag..."
msgstr "Legg til ny etikett …"
#. +> trunk5
#: core/libs/tags/widgets/tagspopupmenu.cpp:592
#, kde-format
msgid "More Tags..."
msgstr "Flere etiketter .."
#. +> trunk5
#: core/libs/tags/widgets/tagspopupmenu.cpp:690
#, kde-format
msgid "Assign this Tag"
msgstr "Tilordne denne etiketten"
#. +> trunk5
#: core/libs/tags/widgets/tagspopupmenu.cpp:699
#, kde-format
msgid "Remove this Tag"
msgstr "Fjern denne etiketten"
#. +> trunk5
#: core/libs/tags/widgets/tagspopupmenu.cpp:709
#, kde-format
msgid "Go to this Tag"
msgstr "Gå til denne etiketten"
#. +> trunk5
#: core/libs/template/subjectedit.cpp:54
#, kde-format
msgid "Enter the Informative Provider Reference here. I.P.R is a name registered with the XMP/NAA, identifying the provider that provides an indicator of the content. The default value for the I.P.R is \"XMP\" if a standard Reference Code is used."
msgstr "Oppgi her Informative Provider Reference, IPR. I.P.R er et navn som er registrert hos XMP//NAA, som navngir leverandøren som tilbyr en indikator for innholdet. Standardverdi for I.P.R er «XMP\"» hvis det brukes en standard referansekode."
#. +> trunk5
#: core/libs/template/subjectedit.cpp:60
#, kde-format
msgid "Enter the Subject Reference Number here. Provides a numeric code to indicate the Subject Name plus optional Subject Matter and Subject Detail Names in the language of the service. Subject Reference is a number from the range 01000000 to 17999999 and represent a language independent international reference to a Subject. A Subject is identified by its Reference Number and corresponding Names taken from a standard lists given by XMP/NAA. If a standard reference code is used, these lists are the English language reference versions. This field is limited to 8 digit code."
msgstr "Oppgi her referansenummer for emnet. Dette er en tallkode som viser Emnenavn og valgfritt Emne- og Emnedetaljnavn i tjenestens språk. Referansenummeret er et tall fra 01000000 til 17999999 og representerer en språkuavhengig internasjonal referanse til et Emne. Et Emne identifiseres ved sitt referansenummer og tilsvarende navn tatt fra standardlister utgitt av XMP/NAA. Hvis det brukes en standard referansekode er disse listene referanseversjoner på engelsk. Dette feltet har høyst 8 sifre."
#. +> trunk5
#: core/libs/template/subjectedit.cpp:73
#, kde-format
msgid "Enter the Subject Name here. English language is used if you selected a standard XMP/NAA reference code."
msgstr "Oppgi her emnenavn her. Engelsk språk hvis du har valgt en standard XMP/NAA referansekode."
#. +> trunk5
#: core/libs/template/subjectedit.cpp:77
#, kde-format
msgid "Enter the Subject Matter Name here. English language is used if you selected a standard XMP/NAA reference code."
msgstr "Oppgi her emnets saksnavn her. Engelsk språk hvis du har valgt en standard XMP/NAA referansekode."
#. +> trunk5
#: core/libs/template/subjectedit.cpp:81
#, kde-format
msgid "Enter the Subject Detail Name here. English language is used if you selected a standard XMP/NAA reference code."
msgstr "Oppgi her emnedetaljens navn. Engelsk språk brukes hvis du valgte en standard XMP/NAA referansekode."
#. +> trunk5
#: core/libs/template/templatelist.cpp:80
#, kde-format
msgid "Here you can see the metadata template list managed by digiKam."
msgstr "Her ser du en liste over metadatamaler brukt i digiKam."
#. +> trunk5
#: core/libs/template/templatepanel.cpp:121
#, kde-format
msgid "Author Names:"
msgstr "Autorenes navn:"
#. +> trunk5
#: core/libs/template/templatepanel.cpp:124
#, kde-format
msgid "Enter the names of the photograph's creators. Use semi-colons as separator here."
msgstr "Oppgi fotografenes navn: Bruk semikolon som skilletegn."
#. +> trunk5
#: core/libs/template/templatepanel.cpp:126
#, fuzzy, kde-format
#| msgid ""
#| "<p>This field should contain the names of the persons who created the photograph. If it is not appropriate to add the name of the photographer (for example, if the identity of the photographer needs to be protected) the name of a company or organization can also be used. Once saved, this field should not be changed by anyone. "
#| "<p>To enter more than one name, use <b>semi-colons as separators</b>.</p>"
#| "<p>With IPTC, this field is limited to 32 ASCII characters.</p>"
msgid ""
"<p>This field should contain the names of the persons who created the photograph. If it is not appropriate to add the name of the photographer (for example, if the identity of the photographer needs to be protected) the name of a company or organization can also be used. Once saved, this field should not be changed by anyone.</p>"
"<p>To enter more than one name, use <b>semi-colons as separators</b>.</p>"
"<p>With IPTC, this field is limited to 32 ASCII characters.</p>"
msgstr ""
"<p>Dette feltet kan inneholde navnene på dem som tok bildet. Hvis det ikke passer å legge inn fotografens navn her (f.eks. hvis fotografens identitet må beskyttes), kan navnet til et firma eller en organisasjon oppgis. Når dette først er lagret, bør det ikke endres igjen av noen. "
"<p>For å legge inn mer enn ett navn skal du bruke <b>semikolon som skilletegn</b>.</p>"
"<p>Lengden på dette er feltet er begrenset til 32 ASCII-tegn når IPTC er i bruk.</p>"
#. +> trunk5
#: core/libs/template/templatepanel.cpp:135
#, kde-format
msgid "Authors' Positions:"
msgstr "Autorens stilling:"
# Autor brukes på norsk om opphavsperson til et fotografi.
#. +> trunk5
#: core/libs/template/templatepanel.cpp:138
#, kde-format
msgid "Enter the job titles of the authors here."
msgstr "Legg inn autorenes stillingsbetegnelser her."
#. +> trunk5
#: core/libs/template/templatepanel.cpp:140
#, kde-format
msgid ""
"<p>This field should contain the job titles of the authors. Examples might include titles such as: Staff Photographer, Freelance Photographer, or Independent Commercial Photographer. Since this is a qualifier for the Author field, the Author field must also be filled out.</p>"
"<p>With IPTC, this field is limited to 32 ASCII characters.</p>"
msgstr ""
"<p>Dette feltet bør inneholde stillingstitlene til autorene. Eksempler kan være slike titler som: Pressefotograf, Frilans-fotograf, Uavhengig fotograf. Siden dette hører til Autor-feltet må Autor-feltet også fylles ut.</p>"
"<p>Med IPTC er dette feltet begrenset til 32 ASCII-tegn.</p>"
#. +> trunk5
#: core/libs/template/templatepanel.cpp:151
#, kde-format
msgid "Enter the photograph credit here."
msgstr "Oppgi hvem som skal krediteres."
#. +> trunk5
#: core/libs/template/templatepanel.cpp:153
#, kde-format
msgid ""
"<p>(synonymous to Provider): Use the Provider field to identify who is providing the photograph. This does not necessarily have to be the author. If a photographer is working for a news agency such as Reuters or the Associated Press, these organizations could be listed here as they are \"providing\" the image for use by others. If the image is a stock photograph, then the group (agency) involved in supplying the image should be listed here.</p>"
"<p>With IPTC, this field is limited to 32 ASCII characters.</p>"
msgstr ""
"<p>(synonymt med Leverandør): Bruk Leverandør-feltet til å identifisere hvem som leverer bildet. Dette er ikke nødvendigvis autoren. Hvis en fotograf arbeider for et nyhetsbyrå slik som NTB eller Associated Press, så kan disse organisasjonene listes her siden det er de som «leverer» bildene til bruk for andre. Hvis bildet er et arkivbilde, så skal gruppen (byrået) som formidler bildet listes her.</p>"
"<p>Med IPTC er dette feltet begrenset til 32 ASCII-tegn.</p>"
#. +> trunk5
#: core/libs/template/templatepanel.cpp:165
#, kde-format
msgid "Enter the copyright notice to identify the current owner(s) of the copyright here."
msgstr "Skriv inn notis som identifiserer hvem som har opphavsretten."
"In Europe you would use: Copyright {Year} {Copyright owner}, all rights reserved. \n"
"In Japan, for maximum protection, the following three items should appear in the copyright field of the IPTC Core: (a) the word, Copyright; (b) year of the first publication; and (c) name of the author. You may also wish to include the phrase \"all rights reserved\".</p>"
"<p>With XMP, you can include more than one copyright string using different languages.</p>"
"<p>With IPTC, this field is limited to 128 ASCII characters.</p>"
"I japan brukes disse tre delene i Copyright-feltet: a) Ordet Copyright, b) År for første offentliggjøring, c) navnet på autoren. Det er også mulig å legge til «all rights reserved».</p>"
"<p>Med XMP kan det legges inn mer enn en copyright-streng med forskjellige språk.</p>"
"<p>Med IPTC er dette feltet begrenset til 128 ASCII-tegn.</p>"
"<p> Se også <a href=\"http://no.wikipedia.org/wiki/Fotografirett\">Fotografirett</a> i norsk Wikipedia.</p>"
#. +> trunk5
#: core/libs/template/templatepanel.cpp:186
#, kde-format
msgid "Right Usage Terms:"
msgstr "Betingelser for bruk:"
#. +> trunk5
#: core/libs/template/templatepanel.cpp:188
#, kde-format
msgid "Enter the list of instructions on how a resource can be legally used here."
msgstr "Oppgi en liste over anvisninger for hvordan en ressurs kan brukes lovlig."
#. +> trunk5
#: core/libs/template/templatepanel.cpp:189
#, fuzzy, kde-format
#| msgid ""
#| "<p>The Right Usage Terms field should be used to list instructions on how a resource can be legally used."
#| "<p>With XMP, you can include more than one right usage terms string using different languages.</p>"
#| "<p>This field does not exist with IPTC.</p>"
msgid ""
"<p>The Right Usage Terms field should be used to list instructions on how a resource can be legally used.</p>"
"<p>With XMP, you can include more than one right usage terms string using different languages.</p>"
"<p>This field does not exist with IPTC.</p>"
msgstr ""
"<p>I feltet Betingelser for bruk bør det listes instruksjoner om hvordan en ressurs kan brukes lovlig.</p>"
"<p>Med XMP kan det legges inn mer enn en betingelsesstreng med forskjellige språk.</p>"
"<p>Dette feltet finnes ikke med IPTC.</p>"
#. +> trunk5
#: core/libs/template/templatepanel.cpp:200
#, kde-format
msgid "Enter the original owner of the photograph here."
msgstr "Legg inn navnet på fotografiets opprinnelige eier her."
#. +> trunk5
#: core/libs/template/templatepanel.cpp:202
#, kde-format
msgid ""
"<p>The Source field should be used to identify the original owner or copyright holder of the photograph. The value of this field should never be changed after the information is entered following the image's creation. While not yet enforced by the custom panels, you should consider this to be a \"write-once\" field. The source could be an individual, an agency, or a member of an agency. To aid in later searches, it is suggested to separate any slashes \"/\" with a blank space. Use the form \"photographer / agency\" rather than \"photographer/agency.\" Source may also be different from Creator and from the names listed in the Copyright Notice.</p>"
"<p>With IPTC, this field is limited to 32 ASCII characters.</p>"
msgstr ""
"<p>Kilde-feltet skal brukes til å indentifisere den originale eier eller opphavsrettseier til bildet. Når feltet først er fylt ut etter at bildet er laget bør det aldri endres igjen. Selv om datarutene ikke har den mulligheten bør du betrakte dette som et felt som «skrives én gang». Kilden kan være en person, et byrå, eller et medlem av et byrå. Dersom det oppgis flere er det lurt å bruke mellomrom rundt «/» som skilletegn for å gjøre søking lettere. Bruk «fotograf / byrå» i stedet for «fotograf/byrå». Kilde kan være forskjellig fra Autor og navnene listet i oppphavsrettsnotisen.</p>"
"<p>Med IPTC er dette feltet begrenset til 32 ASCII-tegn.</p>"
#. +> trunk5
#: core/libs/template/templatepanel.cpp:214
#: core/libs/template/templateviewer.cpp:167
#, kde-format
msgid "Instructions:"
msgstr "Instruksjoner:"
#. +> trunk5
#: core/libs/template/templatepanel.cpp:217
#, kde-format
msgid "Enter the editorial notice here."
msgstr "Legg inn redaksjonelt notat her."
#. +> trunk5
#: core/libs/template/templatepanel.cpp:219
#, kde-format
msgid ""
"<p>The Instructions field should be used to list editorial instructions concerning the use of photograph.</p>"
"<p>With IPTC, this field is limited to 256 ASCII characters.</p>"
msgstr ""
"<p>Instruksjonsfeltet skal brukes til å liste redaksjonelle instruksjoner om bruken av bildet.</p>"
"<p>Med IPTC er dette feltet begrenset til 256 ASCII-tegn.</p>"
#. +> trunk5
#: core/libs/template/templatepanel.cpp:244
#: core/libs/template/templateviewer.cpp:180
#, kde-format
msgid "Rights"
msgstr "Rettigheter"
#. +> trunk5
#: core/libs/template/templatepanel.cpp:255
#, kde-format
msgid "Enter the city of contents here."
msgstr "Skriv bynavnet"
#. +> trunk5
#: core/libs/template/templatepanel.cpp:257
#, kde-format
msgid "<p>This field should contain the name of the city where the photograph was taken.</p>"
msgstr "<p>Dette feltet skal inneholdet navnet på byen der bildet ble tatt.</p>"
#. +> trunk5
#: core/libs/template/templatepanel.cpp:265
#, kde-format
msgid "Enter the city sublocation of contents here."
msgstr "Legg inn navnet på lokalområdet der bildet ble tatt."
#. +> trunk5
#: core/libs/template/templatepanel.cpp:267
#, kde-format
msgid "<p>This field should contain the sublocation of the city where the photograph was taken.</p>"
msgstr "<p>Dette feltet skal inneholdet navnet på nærområdet i byen der bildet ble tatt.</p>"
#. +> trunk5
#: core/libs/template/templatepanel.cpp:272
#: core/libs/template/templateviewer.cpp:189
#: core/libs/template/templateviewer.cpp:211
#, kde-format
msgid "Province/State:"
msgstr "Provins/delstat:"
#. +> trunk5
#: core/libs/template/templatepanel.cpp:275
#, kde-format
msgid "Enter the province or state of contents here."
msgstr "Skriv inn navnet på provins eller delstat."
#. +> trunk5
#: core/libs/template/templatepanel.cpp:277
#, kde-format
msgid "<p>This field should contain the province or state where the photograph was taken.</p>"
msgstr "<p>Dette feltet skal inneholdet navnet på provins eller delstat der bildet ble tatt.</p>"
#. +> trunk5
#: core/libs/template/templatepanel.cpp:285
#, kde-format
msgid "<p>Select here the country where the photograph was taken.</p>"
msgstr "<p>Velg landet der bildet ble tatt.</p>"
#. +> trunk5
#: core/libs/template/templatepanel.cpp:310
#: core/libs/template/templateviewer.cpp:200
#, kde-format
msgid "Location"
msgstr "Plassering"
#. +> trunk5
#: core/libs/template/templatepanel.cpp:319
#, kde-format
msgid "Enter the city name of the lead author here."
msgstr "Oppgi navnet på hovedautorens hjemby."
#. +> trunk5
#: core/libs/template/templatepanel.cpp:321
#, kde-format
msgid "<p>This field should contain the city name where the lead author lives.</p>"
msgstr "<p>Dettte feltet skal inneholdet havnet på byen der hovedautoren bor.</p>"
#. +> trunk5
#: core/libs/template/templatepanel.cpp:329
#, kde-format
msgid "Enter the country name of the lead author here."
msgstr "Oppgi navnet på hovedautorens hjemland."
#. +> trunk5
#: core/libs/template/templatepanel.cpp:331
#, kde-format
msgid "<p>This field should contain the country name where the lead author lives.</p>"
msgstr "<p>Dette feltet skal inneholdet navnet på landet der hovedautoren bor.</p>"
#. +> trunk5
#: core/libs/template/templatepanel.cpp:336
#: core/libs/template/templateviewer.cpp:205
#, kde-format
msgid "Address:"
msgstr "Adresse:"
#. +> trunk5
#: core/libs/template/templatepanel.cpp:339
#, kde-format
msgid "Enter the address of the lead author here."
msgstr "Oppgi adressen til hovedautoren her."
#. +> trunk5
#: core/libs/template/templatepanel.cpp:341
#, kde-format
msgid "<p>This field should contain the address where the lead author lives.</p>"
msgstr "<p>Dette feltet skal inneholde adressen til hovedautorens hjem.</p>"
#. +> trunk5
#: core/libs/template/templatepanel.cpp:346
#: core/libs/template/templateviewer.cpp:207
#, kde-format
msgid "Postal Code:"
msgstr "Postnummer:"
#. +> trunk5
#: core/libs/template/templatepanel.cpp:349
#, kde-format
msgid "Enter the postal code of the lead author here."
msgstr "Oppgi hovedautorens postnummer her."
#. +> trunk5
#: core/libs/template/templatepanel.cpp:351
#, kde-format
msgid "<p>This field should contain the postal code where the lead author lives.</p>"
msgstr "<p>Dette feltet skal innheholde postnummeret til hovedautorens hjemsted.</p>"
#. +> trunk5
#: core/libs/template/templatepanel.cpp:356
#, kde-format
msgid "Province:"
msgstr "Provins:"
#. +> trunk5
#: core/libs/template/templatepanel.cpp:359
#, kde-format
msgid "Enter the province of the lead author here."
msgstr "Oppgi hovedautorens hjemprovins her."
#. +> trunk5
#: core/libs/template/templatepanel.cpp:361
#, kde-format
msgid "<p>This field should contain the province where the lead author lives.</p>"
msgstr "<p>Dette feltet skal innholde navnet på provinsen der hovedautoren bor.</p>"
#. +> trunk5
#: core/libs/template/templatepanel.cpp:366
#: core/libs/template/templateviewer.cpp:217
#, kde-format
msgid "Email:"
msgstr "E-post:"
#. +> trunk5
#: core/libs/template/templatepanel.cpp:369
#, kde-format
msgid "Enter the email of the lead author here."
msgstr "Oppgi hovedautorens e-postadresse her."
#. +> trunk5
#: core/libs/template/templatepanel.cpp:371
#, kde-format
msgid "<p>This field should contain the email of the lead author.</p>"
msgstr "<p>Dette feltet bør inneholde e-postadressen til hovedautoren.</p>"
#. +> trunk5
#: core/libs/template/templatepanel.cpp:379
#, kde-format
msgid "Enter the phone number of the lead author here."
msgstr "Oppgi hovedautorens telefonnummer her."
#. +> trunk5
#: core/libs/template/templatepanel.cpp:381
#, kde-format
msgid "<p>This field should contain the phone number of the lead author.</p>"
msgstr "<p>Dette feltet skal inneholde telefonnummeret til hovedautoren.</p>"
#. +> trunk5
#: core/libs/template/templatepanel.cpp:389
#, kde-format
msgid "Enter the web site URL of the lead author here."
msgstr "Tast inn hovedautorens nettadresse her."
#. +> trunk5
#: core/libs/template/templatepanel.cpp:391
#, kde-format
msgid "<p>This field should contain the web site URL of the lead author.</p>"
msgstr "<p>Dette feltet bør innholde adressen til hovedautorens nettsted</p>"
#. +> trunk5
#: core/libs/template/templateselector.cpp:72
#, kde-format
msgid "Template: "
msgstr "Mal: "
#. +> trunk5
#: core/libs/template/templateselector.cpp:76
#, kde-format
msgid "Open metadata template editor"
msgstr "Åpne redigeringen for metadatamaler"
#. +> trunk5
#: core/libs/template/templateselector.cpp:77
#, kde-format
msgid ""
"<p>Select here the action to perform using the metadata template.</p>"
msgid "Determine Time Difference With Clock Photo"
msgstr ""
#. +> trunk5
#: core/libs/timeadjust/clockphotodialog.cpp:96
#, kde-format
msgid "Load different photo"
msgstr "Last et annet foto"
#. +> trunk5
#: core/libs/timeadjust/clockphotodialog.cpp:103
#, kde-format
msgid "If you have a photo in your set with a clock or another external time source on it, you can load it here and set the indicator to the (date and) time displayed. The difference of your internal camera clock will be determined from this setting."
msgstr "Hvis du har et foto i gruppa som har en klokke eller annen ekstern tidskilde, så kan du laste det inn her og stille inn indikatoren på den (datoen og) tiden som er vist. Forskjellen til din interne kameraklokke vil bli bestemt ut fra dette,"
#| msgid "An error has occurred with the media player...."
msgid "An error has occurred with the media player..."
msgstr "Det oppsto en feil ved mediespilleren …"
#. +> trunk5
#: core/libs/widgets/combo/dcombobox.cpp:70
#: core/libs/widgets/range/dnuminput.cpp:80
#: core/libs/widgets/range/dnuminput.cpp:179
#, kde-format
msgctxt "@info:tooltip"
msgid "Reset to default value"
msgstr "Tilbakestill til standardverdi"
#. +> trunk5
#: core/libs/widgets/common/searchtextbar.cpp:289
#, kde-format
msgid "Case sensitive"
msgstr "Skill mellom små og store bokstaver"
#. +> trunk5
#: core/libs/widgets/files/dbinaryiface.cpp:210
#, kde-format
msgid "Navigate to %1"
msgstr "Naviger til %1"
#. +> trunk5
#: core/libs/widgets/files/dbinarysearch.cpp:69
#, fuzzy, kde-format
#| msgctxt "@info:tooltip column contains the value in binary format"
#| msgid "Binary"
msgid "Binary"
msgstr "Binær"
#. +> trunk5
#: core/libs/widgets/files/dbinarysearch.cpp:70
#, kde-format
msgid "Version"
msgstr "Versjon"
#. +> trunk5
#: core/libs/widgets/files/dbinarysearch.cpp:103
#, kde-format
msgid "Binary not found."
msgstr "Fant ikke binær"
#. +> trunk5
#: core/libs/widgets/files/dbinarysearch.cpp:104
#, kde-format
msgid "Minimal version number required for this binary is %1"
msgstr "Minste versjonsnummer som kreves for denne binæren er %1"
#. +> trunk5
#: core/libs/widgets/files/dbinarysearch.cpp:106
#, kde-format
msgid "Find"
msgstr "Finn"
#. +> trunk5
#: core/libs/widgets/files/dbinarysearch.cpp:108
#, kde-format
msgid " or <a href=\"%1\">download</a>"
msgstr " eller <a href=\"%1\">last ned</a>"
#. +> trunk5
#: core/libs/widgets/files/dbinarysearch.cpp:133
#, kde-format
msgid ""
"<qt>"
"<p><font color=\"red\"><b>Warning:</b> Some necessary binaries have not been found on your system. If you have these binaries installed, please click the 'Find' button to locate them on your system, otherwise please download and install them to proceed.</font></p>"
"</qt>"
msgstr ""
"<qt>"
"<p><font color=\"red\"><b>Advarsel:</b> Noen nødvendige binærfiler ble ikke funnet på systemet ditt. Hvis du har dem installert, så trykk «Finn»-knappen for å finne dem på systemet eller last dem ned og installer dem for å kunne fortsette.</font></p>"
"</qt>"
#. +> trunk5
#: core/libs/widgets/files/dbinarysearch.cpp:167
#, kde-format
msgid "A development version has been detect. There is no guarantee on the behavior of this binary."
msgstr "En utviklingsversjon ble oppdaget. Det er ingen garanti for hvordan denne binærfila oppfører seg."
#. +> trunk5
#: core/libs/widgets/files/dbinarysearch.cpp:173
#, fuzzy, kde-format
#| msgctxt "Yahoo title for a downloaded information of a share"
#| msgid "Change"
msgid "Change"
msgstr "Endring"
#. +> trunk5
#: core/libs/widgets/files/dfileselector.cpp:63
#, fuzzy, kde-format
#| msgctxt "@title:menu in Copy To or Move To submenu"
msgid "Here you can switch between fixed font size and font size to be calculated dynamically and adjusted to changing environment (e.g. widget dimensions, paper size)."
msgstr "Her kan du bytte mellom faste eller dynamiske skrifter som justeres etter omgivelsene (som f.eks. papirstørrelse, eller vinduselementer)."
"<p><b>Perceptual intent</b> causes the full gamut of the image to be compressed or expanded to fill the gamut of the destination device, so that gray balance is preserved but colorimetric accuracy may not be preserved.</p>"
"<p>In other words, if certain colors in an image fall outside of the range of colors that the output device can render, the image intent will cause all the colors in the image to be adjusted so that the every color in the image falls within the range that can be rendered and so that the relationship between colors is preserved as much as possible.</p>"
"<p>This intent is most suitable for display of photographs and images, and is the default intent.</p>"
"</li>"
"<li>"
"<p><b>Absolute Colorimetric intent</b> causes any colors that fall outside the range that the output device can render to be adjusted to the closest color that can be rendered, while all other colors are left unchanged.</p>"
"<p>This intent preserves the white point and is most suitable for spot colors (Pantone, TruMatch, logo colors, ....)</p>"
"</li>"
"<li>"
"<p><b>Relative Colorimetric intent</b> is defined such that any colors that fall outside the range that the output device can render are adjusted to the closest color that can be rendered, while all other colors are left unchanged. Proof intent does not preserve the white point.</p>"
"</li>"
"<li>"
"<p><b>Saturation intent</b> preserves the saturation of colors in the image at the possible expense of hue and lightness.</p>"
"<p>Implementation of this intent remains somewhat problematic, and the ICC is still working on methods to achieve the desired effects.</p>"
"<p>This intent is most suitable for business graphics such as charts, where it is more important that the colors be vivid and contrast well with each other rather than a specific color.</p>"
"</li>"
"</ul>"
msgstr ""
"<ul>"
"<li>"
"<p><b>Perseptuelt formål </b>komprimerer eller utvider bildets fargeskala for å utfylle fargeskalaen til målmediet slik at gråbalansen bevares mens den kolorimetriske nøyaktigheten kan endres.</p>"
"<p>Med andre ord; hvis noen farger i et bilde faller utenfor den fargeskalaen som kan framstilles av utdata-enheten, vil metoden justere alle farger i bildet slik at hver og en av fargene i bildet faller innenfor den skalaen som kan framstilles og slik at forholdet mellom fargene bevares mest mulig. </p>"
"<p>Dette er den metoden som passer best for visning av fotografier og er derfor standardmetoden .</p>"
"</li>"
"<li>"
"<p><b> Absolutt kolorimetrisk metode</b> gjør at de fargene som faller utenfor skalaen til utdata-enheten justeres til den nærmeste fargen som kan framstilles mens andre farger forblir uendret.</p>"
"<p>Denne metoden bevarer hvitpunkter og er best egnet for punktfarger (Pantone, Trumatch, logofarger …).</p>"
"</li>"
"<li>"
"<p><b>Relativ kolorimetrisk metode</b> defineres slik at enhver farge som faller utenfor den skalaen som utdata-enheten kan framstille endres til den nærmeste fargen som kan framstilles. Hvitpunkt bevares ikke.</p>"
"</li>"
"<li>"
"<p><b>Metningsmetoden</b> bevarer fargemetningen, muligens på bekostning av fargetone og lysstyrke.</p>"
"<p>Det er fremdeles problemer forbundet med implementeringen av denne metoden, og ICC arbeider fremdeles med løsninger for å oppnå den ønskede virkningen.</p>"
"<p>Denne metoden passer best til forretningsgrafikk, f.eks. grafiske framstillinger der klare farger og kontraster er viktigere enn å beholde den helt riktige fargen.</p>"
"<p>This area contains a CIE or chromaticity diagram. A CIE diagram is a representation of all the colors that a person with normal vision can see. This is represented by the colored sail-shaped area. In addition you will see a triangle that is superimposed on the diagram outlined in white. This triangle represents the outer boundaries of the color space of the device that is characterized by the inspected profile. This is called the device gamut.</p>"
"<p>In addition there are black dots and yellow lines on the diagram. Each black dot represents one of the measurement points that were used to create this profile. The yellow line represents the amount that each point is corrected by the profile, and the direction of this correction.</p>"
msgstr ""
"<p>Dette området inneholder et CIE- eller kromatisitetsdiagram. Et CIE-diagram har alle farger som en person med normalt syn kan se. Diagrammet utgjøres av det mangefargede seilformede området. I tillegg ser du en trekant av hvite linjer som er lagt oppå diagrammet. Trekantens sider svarer til yttergrensene for fargerommet til den enheten som beskrives av den undersøkte profilen. Dette kallets enhetens fargeomfang.</p>"
"<p> I tillegg har diagrammet noe svarte punkter og gule linjer. Hvert svart punkt svarer til et av målepunktene som ble brukt for å lage profilen. De gule linjene framstiller størrelse på rettelsene som profilen gjorde med hvert punkt, og i hvilken retning rettelsene gikk.</p>"
"<p>The ICC profile path seems to be invalid.</p>"
"<p>If you want to set it now, select \"Yes\", otherwise select \"No\". In this case, \"Color Management\" feature will be disabled until you solve this issue</p>"
msgstr ""
"<p>Adressen til ICC-profilen er ikke gyldig.</p>"
"<p>Hvis du vil velge ny adresse, velg «Ja», og velg «Nei» hvis ikke. I så fall slås fargestyringen av til du retter opp dette.</p>"
msgid "<p><a href='http://en.wikipedia.org/wiki/Exif'>EXIF</a> - a standard used by most digital cameras today to store technical information (like aperture and shutter speed) about an image.</p>"
msgstr "<p><a href='http://en.wikipedia.org/wiki/Exif'>EXIF</a> -en standard dom idag brukes av de fleste digitale kameraer for å lagre teknisk informadjon (f.eks. blender og lukkerhastighet)</p>"
msgid "<p><a href='http://en.wikipedia.org/wiki/IPTC_Information_Interchange_Model'>IPTC</a> - an older standard used in digital photography to store photographer information in images.</p>"
msgstr "<p><a href='http://en.wikipedia.org/wiki/IPTC'>IPTC</a> – en eldre standard brukt i digital fotografi for lagre fotoinformasjon i bilder.</p>"
msgid "<p><a href='http://en.wikipedia.org/wiki/Extensible_Metadata_Platform'>XMP</a> - a new standard used in digital photography, designed to replace IPTC.</p>"
msgstr "<p><a href='http://no.wikipedia.org/wiki/XMP'>XMP </a> er en ny standard innen digital fotografi som skal erstatte IPTC.</p>"
msgid "This list shows the results for your renaming pattern. Red items indicate a name collision, either because the new name is equal to the current name, or because the name has already been assigned to another item."
msgstr "Denne lista viser resultatet av mønsteret for navnebytte. Røde linjer viser til navnekonflikt, enten fordi det nye navnet er like det nåværende eller fordi et annet element allerede har det nye navnet."
msgid "<p>Enter your renaming pattern here. Use the access buttons to quickly add renaming options and modifiers. For further explanation, use the information button.</p>"
msgstr "<p>Skriv inn navnendringsmønsteret her. Bruk tilgangsknappene for kjapt å legge til navnendringsvalg og modifikatorer. Bruk informasjonsknappen for å finne videre forklaringer.</p>"
msgid "<p>Add a modifier to a renaming option. To activate this button, place the cursor behind a renaming option or an already assigned modifier.</p>"
msgstr "<p>Legg til en modifikator til et valg for navneendring. Legg markøren bak et navnebyttevalg eller en modifikator som alt er tilordnet, for å aktivere denne knappen.</p>"
#| msgid "Face detection is a time-consuming task. You can choose if you wish to employ all processor cores on your system, or work in the background only on one core."
msgctxt "@info"
msgid "Face detection is a time-consuming task. You can choose if you wish to employ all processor cores on your system, or work in the background only on one core. Warning: this features still experimental and it is disabled by default."
msgstr "Ansiktsoppdaging er en tidkrevende oppgave. Du kan velge om du vil bruke alle prosessorkjerner på systemet, eller arbeide i bakgrunnen bare på én kjerne."
#| msgid "This will clear all training data for recognition and rebuild it from all available faces. Be careful if any other application helped in building your training database. "
msgctxt "@info:tooltip"
msgid "This will clear all training data for recognition and rebuild it from all available faces."
msgstr "Dette tømmer alle data som brukes til trening for gjenkjenning og bygger det på nytt fra alle tilgjengelige ansikter. Vær forsiktig om et annet program var med på å bygge opp treningsdatabasen. "
msgid "<b>Configure where you keep your images</b>"
msgstr ""
#. +> trunk5
#: core/utilities/firstrun/collectionpage.cpp:83
#, kde-format
msgctxt "This is a path name so you should include the slash in the translation"
msgid "/Pictures"
msgstr "/Bilder"
#. +> trunk5
#: core/utilities/firstrun/collectionpage.cpp:89
#, fuzzy, kde-format
#| msgid ""
#| "<p>Please enter a location where you want to store your images.</p>"
#| " "
#| "<p>You can choose any local folder, even one that already contains images.<br/>"
#| " More folders can be added later under the <i>Settings</i> menu. </p>"
#| " "
msgid ""
"<p>Please enter a location where you keep your images.</p>"
" "
"<p>You can choose any local folder, even one that already contains images.<br/>"
" More folders can be added later under the <i>Settings</i> menu. </p>"
" "
msgstr ""
"<p>Oppgi et sted hvor du vil lagre bildene dine.</p>"
" "
"<p>Du kan velge hvilken som helst lokal mappe, også en som inneholder bilder fra før.<br/>"
" Flere mapper kan legges til senere under menyen <i>Innstillinger</i></p>"
" "
#. +> trunk5
#: core/utilities/firstrun/collectionpage.cpp:96
#, fuzzy, kde-format
#| msgid ""
#| "<p>Below are the locations of your root albums used to store your images. Write access is necessary to be able to edit images in these albums.</p>"
#| "<p>Note: Removable media (such as USB drives or DVDs) and remote file systems (such as NFS, or Samba mounted with cifs/smbfs) are supported.</p>"
#| "<p></p>"
msgid "<p><i>Note:</i> removable media (such as USB drives or DVDs) and remote file systems (such as NFS, or Samba mounted with cifs/smbfs) are supported.</p>"
msgstr ""
"<p>Nedenfor vises plasseringen av rotalbumene som bildene dine lagres i. Du trenger skrivetilgang for å redigere bildene.</p>"
"<p>Merk: Du kan bruke flyttbare lagringsmedier (som USB-eneheter og DVDer) og fjerntliggende filsystemer (NFS og Samba). </p>"
" "
"<p></p>"
#. +> trunk5
#: core/utilities/firstrun/collectionpage.cpp:157
#, kde-format
msgid "You must select a folder for digiKam to use as the root album. All of your images will go there."
msgstr "Du må velge en mappe som digiKam skal bruke som rot-album. Alle bildene havner der."
#. +> trunk5
#: core/utilities/firstrun/collectionpage.cpp:185
#, kde-format
msgid "Create Root Album Folder?"
msgstr "Vil du opprette rot-albummappe?"
#. +> trunk5
#: core/utilities/firstrun/collectionpage.cpp:186
#, kde-format
msgid ""
"<p>The folder to use as the root album path does not exist:</p>"
"<p><b>%1</b></p>"
"Would you like digiKam to create it for you?"
msgstr ""
"<p>Mappa du valgte som sti til rot-albumet finnes ikke:</p>"
" "
"<p><b>%1</b></p>"
"Vil du at digiKam skal opprette den?"
#. +> trunk5
#: core/utilities/firstrun/collectionpage.cpp:198
#, kde-format
msgid "Create Root Album Folder Failed"
msgstr "Klarte ikke å opprette rot-albummappe"
#. +> trunk5
#: core/utilities/firstrun/collectionpage.cpp:199
#, kde-format
msgid ""
"<p>digiKam could not create the folder to use as the root album.\n"
"Please select a different location.</p>"
"<p><b>%1</b></p>"
msgstr ""
"<p>digiKam klarte ikke opprette mappa som skal brukes som rot-album.\n"
"Velg en annen plassering.</p>"
"<p><b>%1</b></p>"
#. +> trunk5
#: core/utilities/firstrun/collectionpage.cpp:219
#, kde-format
msgid ""
"You do not seem to have write access for the folder selected to be the root album.\n"
"Warning: Without write access, items cannot be edited."
msgstr ""
"Det ser ut til at du ikke har skrivetilgang til mappa som er valgt som rot-album.\n"
"Advarsel: Uten skrivetilgang kan du ikke endre redigere elementet."
#. +> trunk5
#: core/utilities/firstrun/databasepage.cpp:62
#, kde-format
msgid "<b>Configure where you will store databases</b>"
msgstr ""
#. +> trunk5
#: core/utilities/firstrun/metadatapage.cpp:64
#, kde-format
msgid "<b>Configure Metadata Storage to Files</b>"
msgstr "<b>Sett opp hvordan metadata lagres i filer</b>"
#. +> trunk5
#: core/utilities/firstrun/metadatapage.cpp:72
#, fuzzy, kde-format
#| msgid ""
#| "<qt>"
#| "<p>Set here if you want to store the information assigned to items in digiKam in the files' metadata, to improve interoperability with others photo management programs:</p>"
#| "</qt>"
msgid ""
"<qt>"
"<p>Set here if you want to store the information assigned to items in digiKam in the files' metadata, to improve interoperability with other photo management programs:</p>"
"</qt>"
msgstr ""
"<qt>"
"<p>Angi her om du vil lagre informasjon tilordnet elementer i digiKam til filenes metadata, slik at det blir bedre samvirke med andre bildehåndteringsprogrammer.</p>"
"</qt>"
#. +> trunk5
#: core/utilities/firstrun/metadatapage.cpp:82
#, kde-format
msgid "Do nothing"
msgstr "Ikke gjør noe"
#. +> trunk5
#: core/utilities/firstrun/metadatapage.cpp:87
#, kde-format
msgid "Add information to files"
msgstr "Legg til informasjon på filene"
#. +> trunk5
#: core/utilities/firstrun/metadatapage.cpp:97
#, kde-format
msgid ""
"<qt>"
"<p><i>Note:</i> recording information to the files' metadata can slow down photo management operations.</p>"
"</qt>"
msgstr ""
"<qt>"
"<p><i>Merk:</i> å lagre informasjon i filenes metadata kan bremse ned fotobehandlingen.</p>"
"<h1><b>Migrate configuration and metadata from digiKam 4</b></h1>"
"</p>"
"<p>You can choose here if you want to use the configuration and albums from digiKam 4 in new digiKam. Please note the following warnings:</p>"
"<p>Migration is done <b>at your own risk</b>. digiKam developers do not recommend it and do not support it. On the other hand, creating a new configuration might result in loss of tags and other metadata that was not embedded inside the pictures and was only available in digiKam 4's database.</p>"
"<p>In either case you are recommended to backup the configuration files and databases before proceeding.</p>"
#| "<p>Specify how images should be opened when right-clicked on in the icon view:</p>"
#| "</qt>"
msgid ""
"<qt>"
"<p>Specify how images should be opened when left-clicked on in the icon view:</p>"
"</qt>"
msgstr ""
"<qt>"
"<p>Angi hvordan bilder skal åpnes når du høyreklikker på ikonvisningen:</p>"
"</qt>"
#. +> trunk5
#: core/utilities/firstrun/openfilepage.cpp:83
#, kde-format
msgid "Open a preview"
msgstr "Åpne en forhåndsvisning"
#. +> trunk5
#: core/utilities/firstrun/openfilepage.cpp:88
#, kde-format
msgid "Open in the editor"
msgstr "Åpne i redigeringen"
#. +> trunk5
#: core/utilities/firstrun/openfilepage.cpp:98
#, kde-format
msgid ""
"<qt>"
"<p><i>Note:</i> using a preview is always faster than using the editor, especially when checking a series of shots. However, you cannot change or fix the image in preview mode. Note that if you want to compare images quickly, it is often better to use the light table: images can be displayed side-by-side, and synchronized zooming and panning can be performed.</p>"
"</qt>"
msgstr ""
"<qt> "
"<p><i>Merk:</i> det er alltid raskere å bruke en forhåndsvisning enn en redigeringsrute, spesielt når en serie opptak undersøkes, men du kan ikke endre eller fikse på bildene i forhåndsvisningen. Merk at om du vil sammenlikne bilder fort, er det ofte bedre å bruke lysbordet: der kan bilder vises side ved side, og zoom/panorering kan gjøres synkront.</p>"
" </qt>"
#. +> trunk5
#: core/utilities/firstrun/previewpage.cpp:65
#, kde-format
msgid "<b>Configure Preview Behavior</b>"
msgstr "<b>Tilpass oppførsel</b>"
#. +> trunk5
#: core/utilities/firstrun/previewpage.cpp:73
#, kde-format
msgid ""
"<qt>"
"<p>Set here how images are displayed in preview mode and on the light table:</p>"
"</qt>"
msgstr ""
"<qt>"
"<p>Angi her hvordan bilder skal forhåndsvises på lysbordet:</p>"
"</qt>"
#. +> trunk5
#: core/utilities/firstrun/previewpage.cpp:82
#, kde-format
msgid "Load reduced version of image"
msgstr "Last inn redusert verjon av bildet"
#. +> trunk5
#: core/utilities/firstrun/previewpage.cpp:87
#, kde-format
msgid "Load image"
msgstr "Last inn bildet"
#. +> trunk5
#: core/utilities/firstrun/previewpage.cpp:97
#, kde-format
msgid ""
"<qt>"
"<p><i>Note:</i> loading a reduced version of an image is faster but can differ from the original, especially with Raw. In this case, a JPEG version of Raw pre-processed by camera is loaded, instead of the real image data. This JPEG image is embedded in the file metadata and is used by the camera to display a Raw image faster to a TV screen.</p>"
"</qt>"
msgstr ""
"<qt>"
"<p><i>Merk:</i> Det er raskere å laste inn en forminsket versjon av et bilde, men det kan være annerledes enn originalen, spesielt med Raw. I dette tilfellet blir det lastet inn en JPEG-versjon av Raw-bildet som kameraet har behandlet, i stedet for de ekte bildedataene. Dette JPEG-bildet er innebygd i filas metadata, og kameraet bruker det for å vise et Raw-bilde raskere på en TV-skjerm.</p>"
"</qt>"
#. +> trunk5
#: core/utilities/firstrun/rawpage.cpp:65
#, kde-format
msgid "<b>Configure Raw File Handling</b>"
msgstr "<b>Sett opp behandlingen av Raw-filer</b>"
#. +> trunk5
#: core/utilities/firstrun/rawpage.cpp:73
#, kde-format
msgid ""
"<qt>"
"<p>Set here how you want to open Raw images in the editor:</p>"
"</qt>"
msgstr ""
"<qt>"
"<p>Angi hvordan raw-bilder skal åpnes i bilderedigeringen:</p>"
"</qt>"
#. +> trunk5
#: core/utilities/firstrun/rawpage.cpp:82
#, kde-format
msgid "Open directly, with adjustments made automatically"
msgstr "Åpne direkte med automatiske justeringer"
#. +> trunk5
#: core/utilities/firstrun/rawpage.cpp:87
#, kde-format
msgid "Use the Raw import tool to adjust corrections manually"
msgstr "Bruk Raw importverktøyet for å justere korreksjoner manuelt"
#. +> trunk5
#: core/utilities/firstrun/rawpage.cpp:97
#, kde-format
msgid ""
"<qt>"
"<p><i>Note:</i> the Raw import tool is designed for advanced users who want to have the best control over the image. This requires more time in your workflow.</p>"
"</qt>"
msgstr ""
"<qt> "
"<p><i>Merk:</i> Raw importverktøyet er laget for avanserte brukere som vil ha best mulig styring over bildet. Dette krever mer arbeid av deg.</p>"
"</qt>"
#. +> trunk5
#: core/utilities/firstrun/startscanpage.cpp:43
#, kde-format
msgid "Scan Your Collection"
msgstr "Skann samlingen"
#. +> trunk5
#: core/utilities/firstrun/startscanpage.cpp:49
#, fuzzy, kde-format
#| msgid ""
#| "<qt>"
#| "<p>Congratulations. Your minimal setup is done.</p>"
#| "<p>Remember, you can customize more settings using the digiKam configuration panel. To learn more about the digiKam world, we recommend reading the <b>digiKam handbook</b> using the <b>Help/Handbook</b> menu entry (you need to install the separate digiKam documentation package.) You can also read the manual online from the <a href='http://www.digikam.org/docs'>digikam.org website</a>.</p>"
#| "<p>Press <b>Finish</b> to close this assistant. digiKam will scan your collection to register all albums in the database. Items including in albums are collected after startup stage in background.</p>"
#| "<p><i>Note:</i> depending of your collection size, this operation can take a while. If you cancel the scanning operation, it will start again at next digiKam session.</p>"
#| "<p>When scanning has completed, at next start-up, digiKam will only check your collection to identify new albums - which is much faster. You can force digiKam to scan for new items manually using the <b>Tools->Maintenance->Scan for new items</b> menu entry.</p>"
#| "</qt>"
msgid ""
"<qt>"
"<p>Congratulations. Your minimal setup is done.</p>"
"<p>Remember, you can customize more settings using the digiKam configuration panel. To learn more about the digiKam world, we recommend reading the <b>digiKam handbook</b> using the <b>Help/Handbook</b> menu entry (you need to install the separate digiKam documentation package.) You can also read the manual online from the <a href='https://www.digikam.org/docs'>digikam.org website</a>.</p>"
"<p>Press <b>Finish</b> to close this assistant. digiKam will scan your collection to register all albums in the database. Items including in albums are collected after startup stage in background.</p>"
"<p><i>Note:</i> depending on your collection size, this operation can take a while. If you cancel the scanning operation, it will start again in the next digiKam session.</p>"
"<p>When scanning has completed, at next start-up, digiKam will only check your collection to identify new albums - which is much faster. You can force digiKam to scan for new items manually using the <b>Tools->Maintenance->Scan for new items</b> menu entry.</p>"
"</qt>"
msgstr ""
"<qt> "
"<p>Gratulerer. Minimumsoppsettet er klart.</p>"
"<p>Husk at du kan tilpasse innstillingen ved hjelp av digiKams vindu for innstillinger. Vi anbefaler at du leser <b>digiKam-håndboken</b> for å lære mer om digikam-verdenen. Du kan åpne den ved bruk av menypunktet <b>Hjelp/digikam-håndbok</b>. (Du må ha installert en egen dokumentasjonspakke for digiKam). Håndboken finnes også på nettet: <a href='http://www.digikam.org/docs'>digikam.org </a>.</p>"
"<p>Trykk<b>Avslutt></b>for å lukke denne veiviseren. Digikam kommer til å lete igjennom samlingen din for å legge alle albumene inn i databasen.</p>"
"<p><i>Elementer inkludert i albumene blir samlet i bakgrunnen etter oppstarten.</i></p>"
" "
"<p><i>Merk:</i>Tiden dette tar avhenger av størrelsen på samlingen din. Hvis du avbryter letingen kommer den til å sette igang på nytt neste gang du starter digiKam.</p>"
" "
"<p>Når skanningen er ferdig, vil digiKam ved neste oppstart bare se i samlingen etter nye albumer, og dette er mye raskere. Du kan tvinge digiKam manuelt til å skanne etter nye elementer med menypunktet <b>Verktøy→Vedlikehold→Skann etter nye elementer.</b></p>"
"</qt>"
#. +> trunk5
#: core/utilities/firstrun/tooltipspage.cpp:65
#, kde-format
msgid "<b>Enabled Contextual Tooltips</b>"
msgstr "<b>Kontekst-hjelpebobler slått på</b>"
#. +> trunk5
#: core/utilities/firstrun/tooltipspage.cpp:73
#, kde-format
msgid ""
"<qt>"
"<p>Set here if you want to show contextual tooltips in icon-view and folder-view:</p>"
"</qt>"
msgstr ""
"<qt>"
"<p>Angi her om du ønsker kontekstuelle hjelpebobler i ikon-visning og mappevisning:</p>"
"</qt>"
#. +> trunk5
#: core/utilities/firstrun/tooltipspage.cpp:82
#, kde-format
msgid "Do not show tooltips"
msgstr "Ikke vis hjelpebobler"
#. +> trunk5
#: core/utilities/firstrun/tooltipspage.cpp:87
#, kde-format
msgid "Use Tooltips"
msgstr "Vis hjelpebobler"
#. +> trunk5
#: core/utilities/firstrun/tooltipspage.cpp:97
#, kde-format
msgid ""
"<qt>"
"<p><i>Note:</i> tooltips show photograph and digiKam metadata on the fly, as the mouse moves over items. This can be useful when selecting items. Tooltips are displayed in the album folder view, album icon view, camera icon view, batch queue list, and thumb bar. From the digiKam configuration dialog, you can customize the contents of these tooltips and the fonts used.</p>"
"</qt>"
msgstr ""
"<qt>"
"<p><i>Merk:</i> Hjelpebobler viser metadata om bilder og digiKam idet du beveger musepekeren over elementene. Dette kan være nyttig når du skal velge elementer. Hjelpebobler vises i albummappe-visning, albumikon-visning, kameraikon-visning, i listen for satsvis behandling og i miniatyrpanelet. I digiKams oppsettvindu kan du tilpasse tipsenes innhold og skrifttypen som skal brukes.</p>"
"</qt>"
#. +> trunk5
#: core/utilities/firstrun/welcomepage.cpp:49
#, kde-format
msgid ""
"<qt>"
"<p>"
"<h1><b>Welcome to digiKam %1</b></h1>"
"</p>"
"<p>digiKam is an advanced digital photo management application published as open-source.</p>"
"<p>This assistant will help you to configure first run settings to be able to use digiKam quickly.</p>"
"</qt>"
msgstr ""
"<qt>"
"<p>"
"<h1><b>Velkommen til digiKam %1</b></h1>"
"</p>"
"<p>digiKam er et avansert fotohåndteringsprogram offentliggjort som åpen kildekode.</p>"
"<p>Denne veiviseren skal hjelpe deg å sette opp digiKam ved første oppstart slik at du kommer rakst igang med buken av digiKam.</p>"
"</qt>"
#. +> trunk5
#: core/utilities/firstrun/welcomepage.cpp:72
#, kde-format
msgid ""
"<qt><br/>"
"<p>You can ignore the following if you use digiKam for the first time:</p>"
"<p><b>Transition from digiKam 4</b></p>"
"<p>Configuration files from digiKam 4 are not migrated. The old database can still be used, you just need to choose the same locations for collections and database in the following dialogs. It is recommended to create a backup of your database before proceeding.</p>"
"<p>The new location for configuration files is %1 (old %2). There are unresolved problems reported when re-using old configuration files, so it is not recommended to do it for the moment, and at your own risk.</p>"
msgid "Use this option to restrict the duplicate search with some criteria, as to limit search to the album of reference image, or to exclude the album of reference image of the search."
#| "Image fingerprints have not yet been generated for your collection. The Fuzzy Search Tools will not be operational without pre-generated fingerprints.\n"
#| "Do you want to build fingerprints now?\n"
#| "Note: This process can take a while. You can run it any time later using 'Tools/Rebuild all Fingerprints'."
msgid "Image fingerprints have not yet been generated for your collection. The Similarity Search Tools will not be operational without pre-generated fingerprints. Please generate the fingerprints first."
msgstr ""
"Fingeravtrykk for bildene er ikke laget ennå for samlingen din. Vektøyet for uklare søk kan ikke virke uten fingeravtrykk laget på forhånd.\n"
"Vil du bygge fingeravtrykkene nå?\n"
"Merk: Dette kan ta noe tid. Du kan kjøre dette når som helst senere med «Verktøy→Bygg alle fingeravtrykk på nytt»."
"You have enabled writing to sidecar files for metadata storage in the host application, but not for reading. This means that any metadata stored in the sidecar files will be overwritten here.\n"
"Please enable reading of sidecar files in the host application or continue at your own risk."
msgstr ""
"Du har slått på skriving til Sidecar-filer for lagring av metadata i vertsprogrammet, men ikke for lesing. Det betyr at metadata lagret i Sidecar-filene vil bli overskrevet her.\n"
"Slå på lesing av Sidecarfiler i vertsprogrammet, eller fortsett på egen risiko."
"<p>Sets the time zone the camera was set to during photo shooting, so that the time stamps of the images can be converted to GMT to match the GPS time reference.</p>"
"<p>Note: positive offsets count eastwards from zero longitude (GMT), they are 'ahead of time'.</p>"
#| msgid "Sets the maximum difference in seconds from a GPS track point to the image time to be matched. If the time difference exceeds this setting, no match will be attempted."
msgid "Sets the maximum time difference to interpolate GPX file points to image time data. If the time difference exceeds this setting, no match will be attempted."
msgstr "Angir største forskjell i sekunder fra et GPS sporepunkt til bildetida som det søkes etter. Hvis tidsforskjellen er større enn dette vil det ikke bli forsøkt å treffe tiden."
#| msgid "Sets the maximum difference in seconds from a GPS track point to the image time to be matched. If the time difference exceeds this setting, no match will be attempted."
msgid "Sets the maximum time difference from a GPS track point to the image time to be matched. If the time difference exceeds this setting, no match will be attempted."
msgstr "Angir største forskjell i sekunder fra et GPS sporepunkt til bildetida som det søkes etter. Hvis tidsforskjellen er større enn dette vil det ikke bli forsøkt å treffe tiden."
#| msgid "%1 out of %2 images have been correlated. Please check the timezone and gap settings if you think that more images should have been correlated."
msgid "%1 out of %2 images have been correlated. Please check the offset and gap settings if you think that more images should have been correlated."
msgstr "%1 av %2 bilder er blitt korrelert. Kontroller innstillingene for tidssone og tidsgap hvis du mener at flere bilder burde vært korrelert."
msgid "<p>Select the profile for your output device (usually, your printer). This profile will be used to do a soft proof, so you will be able to preview how an image will be rendered via an output device.</p>"
msgstr "<p>Du må velge profil for utdataenheten din(vanligvis skriveren). Denne profilen brukes til forhåndsvisning slik at du kan få se hvordan bildet skal framstilles på utdataenheten.</p>"
msgid "Cannot open the specified working space profile (\"%1\"). No color transformation will be applied. Please check the color management configuration in digiKam's setup."
msgstr "Kan ikke åpne den oppgitte arbeidsromprofilen («%1»). Det vil ikke bli brukt noen fargetransformasjon. Kontroller digiKams oppsett for fargestyring."
msgid "If this option is enabled, the preview area will split vertically. A contiguous area of the image will be shown, with one half from the original image, the other half from the target image."
msgstr "Del forhåndsvisningsområdet loddrett. Det blir vist et sammenhengende område av bildet, med halvparten fra originalbildet og den andre halvparten fra resultatbildet."
msgid "If this option is enabled, the preview area will split horizontally. A contiguous area of the image will be shown, with one half from the original image, the other half from the target image."
msgstr "Del forhåndsvisningsområdet vannrett. Det blir vist et sammenhengende område av bildet, med halvparten fra originalbildet og den andre halvparten fra resultatbildet."
msgid "If this option is enabled, the preview area will split vertically. The same part of the original and the target image will be shown side by side."
msgstr "Del forhåndsvisningsområdet loddrett. Samme del av originalbildet og resultatbildet blir vist side ved side."
msgid "If this option is enabled, the preview area will split horizontally. The same part of the original and the target image will be shown side by side."
msgstr "Del forhåndsvisningsområdet vannrett. Samme del av originalbildet og resultatbildet blir vist ved siden av hverandre."
msgid "For more information about the <b>Mounted Camera</b> driver, please read the <b>Supported Digital Still Cameras</b> section in the digiKam manual."
msgstr "For å få mer informasjon om driveren til <b>det monterte kameraet</b> bør du lese delen om <b>støttede digitalkameraer</b> i digiKams håndbok."
msgid "Set how digiKam will rename files as they are downloaded."
msgstr "Bestem hvordan digiKam skal gi filene nye navn mens de lastes ned."
#. +> trunk5
#: core/utilities/import/main/importui.cpp:243
#, kde-format
msgid "File Renaming Options"
msgstr "Alternativer for omnavning av filer"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:249
#, kde-format
msgid "Auto-creation of Albums"
msgstr "Lag album automatisk"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:255
#, kde-format
msgid "On the Fly Operations (JPEG only)"
msgstr "Fortløpende oppgaver (kun JPEG)"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:261
#, kde-format
msgid "DNG Convert Options"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:267
#, kde-format
msgid "Scripting"
msgstr "Skripting"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:286
#, kde-format
msgctxt "@action Cancel process"
msgid "Cancel"
msgstr "Avbryt"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:293
#, kde-format
msgctxt "@action Information about camera"
msgid "Information"
msgstr "Informasjon"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:300
#, kde-format
msgctxt "@action Capture photo from camera"
msgid "Capture"
msgstr "Fang inn"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:312
#, kde-format
msgctxt "@action:inmenu"
msgid "Select All"
msgstr "Velg alt"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:320
#, kde-format
msgctxt "@action:inmenu"
msgid "Select None"
msgstr "Velg ingen"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:328
#, kde-format
msgctxt "@action:inmenu"
msgid "Invert Selection"
msgstr "Snu om merking"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:336
#, kde-format
msgctxt "@action:inmenu"
msgid "Select New Items"
msgstr "Merk nye elementer"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:343
#, kde-format
msgctxt "@action:inmenu"
msgid "Select Locked Items"
msgstr "Merk låste elementer"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:351
#, kde-format
msgctxt "@title:menu"
msgid "Download"
msgstr "Last ned"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:356
#, kde-format
msgctxt "@action"
msgid "Download New"
msgstr "Last ned nye"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:366
#, kde-format
msgctxt "@action"
msgid "Download Selected"
msgstr "Last ned merkede"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:373
#, kde-format
msgctxt "@action"
msgid "Download All"
msgstr "Last ned alle"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:381
#, kde-format
msgctxt "@action"
msgid "Download && Delete New"
msgstr "Last ned og slett nye"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:389
#, kde-format
msgctxt "@action"
msgid "Download && Delete Selected"
msgstr "Last ned og slett merkede"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:397
#, kde-format
msgctxt "@action"
msgid "Download && Delete All"
msgstr "Last ned og slett alle"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:404
#, kde-format
msgctxt "@action"
msgid "Upload..."
msgstr "Last opp …"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:412
#, kde-format
msgctxt "@action"
msgid "Toggle Lock"
msgstr "Lås av/på"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:420
#, kde-format
msgctxt "@action"
msgid "Mark as downloaded"
msgstr "Merk som nedlastet"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:427
#, kde-format
msgctxt "@title:menu"
msgid "Delete"
msgstr "Slett"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:432
#, kde-format
msgctxt "@action"
msgid "Delete Selected"
msgstr "Slett merkede"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:440
#, kde-format
msgctxt "@action"
msgid "Delete All"
msgstr "Slett alle"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:446
#, kde-format
msgctxt "@action"
msgid "Delete New"
msgstr "Slett nye"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:454
#, kde-format
msgctxt "@title:group"
msgid "Views"
msgstr "Visninger"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:465
#, kde-format
msgctxt "@action View the selected image"
msgid "Preview Item"
msgstr "Forhåndsvis element"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:485
#, kde-format
msgctxt "@title:menu"
msgid "&Sort Items"
msgstr "&Sorter elementer"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:486
#, kde-format
msgctxt "@info:whatsthis"
msgid "The value by which the items are sorted in the thumbnail view"
msgstr "Verdien elementene sorteres etter når de vises som miniatyrer"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:490
#, kde-format
msgctxt "item:inmenu Sort by"
msgid "By Name"
msgstr "Etter navn"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:491
#, kde-format
msgctxt "item:inmenu Sort by"
msgid "By Path"
msgstr "Etter sti"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:492
#, kde-format
msgctxt "item:inmenu Sort by"
msgid "By Date"
msgstr "Etter dato"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:493
#, kde-format
msgctxt "item:inmenu Sort by"
msgid "By Size"
msgstr "Etter størrelse"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:494
#, kde-format
msgctxt "item:inmenu Sort by"
msgid "By Rating"
msgstr "Etter vurdering"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:495
#, kde-format
msgctxt "item:inmenu Sort by"
msgid "By Download State"
msgstr "Etter nedlastingsstatus"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:519
#, kde-format
msgctxt "@title:inmenu"
msgid "Item Sorting &Order"
msgstr "S&orteringsrekkefølge for elementer"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:520
#, kde-format
msgctxt "@info:whatsthis"
msgid "Defines whether items are sorted in ascending or descending manner."
msgstr "Bestemer om elementene er sortert i stigende eller synkende rekkefølge."
#. +> trunk5
#: core/utilities/import/main/importui.cpp:524
#, kde-format
msgctxt "@item:inmenu Sorting Order"
msgid "Ascending"
msgstr "Stigende"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:526
#, kde-format
msgctxt "@item:inmenu Sorting Order"
msgid "Descending"
msgstr "Synkende"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:538
#, kde-format
msgctxt "@title:menu"
msgid "&Group Items"
msgstr "&Grupper elementer"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:539
#, kde-format
msgctxt "@info:whatsthis"
msgid "The categories in which the items in the thumbnail view are displayed"
msgstr "Elementer i miniatyrvisningen vises i disse kategoriene"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:543
#, kde-format
msgctxt "@item:inmenu Group Items"
msgid "Flat List"
msgstr "Flat liste"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:544
#, kde-format
msgctxt "@item:inmenu Group Items"
msgid "By Folder"
msgstr "Etter mappe"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:545
#, kde-format
msgctxt "@item:inmenu Group Items"
msgid "By Format"
msgstr "Etter format"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:546
#, fuzzy, kde-format
#| msgid "By Date"
msgctxt "@item:inmenu Group Items"
msgid "By Date"
msgstr "Etter dato"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:572
#, kde-format
msgctxt "@action:inmenu"
msgid "Fit to &Window"
msgstr "Avpass til &vinduet"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:577
#, kde-format
msgctxt "@action:inmenu"
msgid "Zoom to 100%"
msgstr "Skaler til 100 %"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:595
#, kde-format
msgctxt "@option:check"
msgid "Show History"
msgstr "Vis historien"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:601
#, kde-format
msgctxt "@option:check"
msgid "Show Thumbbar"
msgstr "Vis sidestolpe for miniatyrer"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:626
#: core/utilities/import/main/importui.cpp:856
#, kde-format
msgctxt "@action"
msgid "Previous Image"
msgstr "Forrige bilde"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:633
#, kde-format
msgctxt "@action Connection failed, try again?"
msgid "Retry"
msgstr "Prøv igjen"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:845
#, kde-format
msgctxt "@action"
msgid "Exit Preview Mode"
msgstr "Forlat forhåndsvisning"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:850
#, kde-format
msgctxt "@action"
msgid "Next Image"
msgstr "Neste bilde"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:862
#, kde-format
msgctxt "@action Go to first image"
msgid "First Image"
msgstr "Første bilde"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:867
#, kde-format
msgctxt "@action Go to last image"
msgid "Last Image"
msgstr "Siste bilde"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:949
#, kde-format
msgctxt "@info:status"
msgid "Canceling current operation, please wait..."
msgstr "Avbryter pågående handling. Vent litt …"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1004
#, kde-format
msgctxt "@info"
msgid "Do you want to close the dialog and cancel the current operation?"
msgstr "Vil du lukke dette vinduet og avbryte pågående handling?"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1014
#, kde-format
msgctxt "@info:status"
msgid "Disconnecting from camera, please wait..."
msgstr "Kobler fra kameraet. Vent litt …"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1056
#, kde-format
msgctxt "@info:status"
msgid "Scanning for new files, please wait..."
msgstr "Søker etter nye filer. Vent litt …"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1095
#, kde-format
msgctxt "@info:status"
msgid "Ready"
msgstr "Klar"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1151
#, kde-format
msgctxt "@info"
msgid "Failed to connect to the camera. Please make sure it is connected properly and turned on."
msgstr "Klarte ikke å skaffe forbindelse til kameraet. Forsikre deg om at det er koblet ordentlig til og at det er slått på."
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1241
#, kde-format
msgctxt "@title:window"
msgid "Select Image to Upload"
msgstr "Velg bilde som skal lastes opp"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1275
#, kde-format
msgctxt "@info"
msgid ""
"There is not enough free space on the Camera Medium to upload pictures.\n"
"\n"
"Space require: %1\n"
"Available free space: %2"
msgstr ""
"Det er ikke nok ledig plass på kameramediet til å laste opp bildene.\n"
"\n"
"Plassbehov: %1\n"
"Ledig plass: %2"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1329
#, fuzzy, kde-format
#| msgctxt "@info"
#| msgid ""
#| "Camera Folder <resource>%1</resource> already contains the item <resource>%2</resource>.<nl>"
#| "Please enter a new filename (without extension):"
msgctxt "@info"
msgid ""
"<qt>Camera Folder <resource>%1</resource> already contains the item <resource>%2</resource>.<br/>"
"Please enter a new filename (without extension):</qt>"
msgstr ""
"Kameramappa <resource>%1</resource> inneholder allerede elementet <resource>%2</resource><br/>"
"Skriv inn et nytt filnavn(uten filetternavn):"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1333
#, kde-format
msgctxt "@title:window"
msgid "File already exists"
msgstr "Fila finnes fra før"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1399
#, kde-format
msgctxt "@info"
msgid "Your custom target album date format is not valid. Please check your settings..."
msgstr "Det datoformatet du har bestemt for målalbumets dato er ikke gyldig. Kontroller innstillingene …"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1439
#, kde-format
msgctxt "@info"
msgid "Collection which host your default target album set to process download from camera device is not available. Please select another one from camera configuration dialog."
msgstr "Samlingen som inneholder ditt standard målalbum som skal behandle nedlasting fra kameraenheten er ikke tilgjengelig. Velg en annen fra oppsettsdialogen for kamera."
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1448
#, kde-format
msgctxt "@info"
msgid "Your default target album set to process download from camera device is not available. Please select another one from camera configuration dialog."
msgstr "Det standard målalbumet du har satt opp til å behandle nedlasting fra kameraenheten er ikke tilgjengelig. Velg et annet fra oppsettsdialogen for kamera."
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1473
#, kde-format
msgctxt "@info"
msgid "<p>Please select the destination album from the digiKam library to import the camera pictures into.</p>"
msgstr "<p>Velg et album fra digikam-biblioteket som skal være bestemmelsessted for import av bilder fra kameraet.</p>"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1564
#, kde-format
msgctxt "@info Popup notification"
msgid "Images download finished, you can now detach your camera while the images will be auto-rotated"
msgstr "Bildenedlasting fullført, nå kan du koble fra kameraet mens bildene blir auto-rotert"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1571
#, kde-format
msgctxt "@info Popup notification"
msgid "Images download finished"
msgstr "Bildenedlasting er fullført"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1966
#, kde-format
msgctxt "@info"
msgid "The items listed below are locked by camera (read-only). These items will not be deleted. If you really want to delete these items, please unlock them and try again."
msgstr "Elementene i lista nedenfor er låst av kameraet (bare lesetilgang). Disse elementene slettes ikke Hvis du virkelig vil slette dem, lås dem opp og prøv igjen."
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1977
#, fuzzy, kde-format
#| msgctxt "@info"
#| msgid "About to delete this image. <warning>Deleted file is unrecoverable.</warning> Are you sure?"
#| msgid_plural "About to delete these %1 images. <warning>Deleted files are unrecoverable.</warning> Are you sure?"
msgctxt "@info"
msgid "About to delete this image. <b>Deleted file is unrecoverable.</b> Are you sure?"
msgid_plural "About to delete these %1 images. <b>Deleted files are unrecoverable.</b> Are you sure?"
msgstr[0] "Skal til å slette dette bildet. <warning>Slettede bilder er borte for alltid.</warning> Er du sikker?"
msgstr[1] "Skal til å slette disse %1 bildene. <warning>Slettede bilder er borte for alltid. </warning>Er du sikker?"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:2028
#, kde-format
msgctxt "@title:window"
msgid "Insufficient Disk Space"
msgstr "Ikke nok diskplass"
#. +> trunk5
#: core/utilities/import/main/importui.cpp:2029
#, fuzzy, kde-format
#| msgctxt "@info"
#| msgid ""
#| "There is not enough free space on the disk of the album you selected to download and process the selected pictures from the camera.\n"
#| "\n"
#| "Estimated space required: %1\n"
#| "Available free space: %2"
msgctxt "@info"
msgid ""
"There is not enough free space on the disk of the album you selected to download and process the selected pictures from the camera.\n"
"\n"
"Estimated space required: %1\n"
"Available free space: %2\n"
"\n"
"Try Anyway?"
msgstr ""
"Det er ikke nok ledig plass på disken der album-biblioteket ligger til å laste ned og behandle bildene som er utvalgt fra kameraet.\n"
msgid "Enable this option to set date and time metadata tags to the right values if your camera does not set these tags correctly when pictures are taken. The values will be saved in the DateTimeDigitized and DateTimeCreated EXIF, XMP, and IPTC tags."
msgstr "Skru på dette alternativet for å sette metadata for dato og klokkeslett riktig dersom kameraet ikke gjør dette når bildet tas. Verdiene lagres i DateTimeDigitized- og DateTimeCreated-etiketter for EXIF,XMP, og IPTC"
msgid "Enable this option to automatically convert all JPEG files to a lossless image format. <b>Note:</b> Image conversion can take a while on a slow computer."
msgstr "Skru på dette alternativet for å omforme alle JPEG-filer til et tapsfritt format automatisk<b>Merk:</b> Omforming av bilder kan ta noe tid på en langsom datamaskin."
#| "<p>These expressions may be used to customize date format:</p>"
#| "<p><b>d</b>: The day as a number without a leading zero (1 to 31)</p>"
#| "<p><b>dd</b>: The day as a number with a leading zero (01 to 31)</p>"
#| "<p><b>ddd</b>: The abbreviated localized day name (e.g. 'Mon' to 'Sun')</p>"
#| "<p><b>dddd</b>: The long localized day name (e.g. 'Monday' to 'Sunday').</p>"
#| "<p><b>M</b>: The month as a number without a leading zero (1 to 12)</p>"
#| "<p><b>MM</b>: The month as a number with a leading zero (01 to 12)</p>"
#| "<p><b>MMM</b>: The abbreviated localized month name (e.g. 'Jan' to 'Dec')</p>"
#| "<p><b>MMMM</b>: The long localized month name (e.g. 'January' to 'December')</p>"
#| "<p><b>yy</b>: The year as two digit number (eg. 00 to 99)</p>"
#| "<p><b>yyyy</b>: The year as four digit number (eg. 2012)</p>"
#| "<p>All other input characters will be treated as text. Any sequence of characters that are enclosed in singlequotes will be treated as text and not be used as an expression. Examples, if date is 20 July 1969:"
#| "<p>"
#| "<p><b>dd.MM.yyyy</b> : 20.07.1969</p>"
#| "<p><b>ddd MMMM d yy</b> : Sun July 20 69</p>"
#| "<p><b>'Photo shot on ' dddd</b> : Photo shot on Sunday</p>"
msgid ""
"<p>These expressions may be used to customize date format:</p>"
"<p><b>d</b>: The day as a number without a leading zero (1 to 31)</p>"
"<p><b>dd</b>: The day as a number with a leading zero (01 to 31)</p>"
"<p><b>ddd</b>: The abbreviated localized day name (e.g. 'Mon' to 'Sun')</p>"
"<p><b>dddd</b>: The long localized day name (e.g. 'Monday' to 'Sunday').</p>"
"<p><b>M</b>: The month as a number without a leading zero (1 to 12)</p>"
"<p><b>MM</b>: The month as a number with a leading zero (01 to 12)</p>"
"<p><b>MMM</b>: The abbreviated localized month name (e.g. 'Jan' to 'Dec')</p>"
"<p><b>MMMM</b>: The long localized month name (e.g. 'January' to 'December')</p>"
"<p><b>yy</b>: The year as two digit number (eg. 00 to 99)</p>"
"<p><b>yyyy</b>: The year as four digit number (eg. 2012)</p>"
"<p>All other input characters will be treated as text. Any sequence of characters that are enclosed in singlequotes will be treated as text and not be used as an expression. Examples, if date is 20 July 1969:</p>"
"<p><b>dd.MM.yyyy</b> : 20.07.1969</p>"
"<p><b>ddd MMMM d yy</b> : Sun July 20 69</p>"
"<p><b>'Photo shot on ' dddd</b> : Photo shot on Sunday</p>"
msgstr ""
"<p>Disse uttrykkene kan brukes til å tilpasse datoformatet:</p>"
"<p><b>d</b>: Dagen som et tall uten innledende null (1 til 31)</p>"
"<p><b>dd</b>: Dagen som et tosifret tall (01 til 31)</p>"
"<p><b>ddd</b>: Det forkortede lokale dagnavnet ('Man' til 'Søn')</p>"
"<p><b>dddd</b>: Det fulle lokale dagnavnet ('Mandah' til 'Søndag').</p>"
"<p><b>M</b>: Måneden som et tall uten innledende null (1 til 12)</p>"
"<p><b>MM</b>: Måneden som et tosifret tall (01 til 12)</p>"
"<p><b>MMM</b>: Det forkortede lokale månedsnavnet ( 'Jan' til 'Des')</p>"
"<p><b>MMMM</b>: Det fulle lokale månedsnavnet (e.g. 'Januar' til 'Desember')</p>"
"<p><b>yy</b>: Året som tosifret tall (00 til 99)</p>"
"<p><b>yyyy</b>: Året som firesifret tall (f.eks. 2012)</p>"
" "
"<p>Alle andre tegn vil bli behandlet som tekst. En streng av tegn som er innesluttet i enkle hermetegn vil bli behandlet som tekst og ikke brukt som et uttrykk. For eksempel, hvis datoen er 20. juli 1969:"
"<p>"
"<p><b>dd.MM.yyyy</b> : 20.07.1969</p>"
"<p><b>ddd MMMM d yy</b> : Søn juli 20 69</p>"
"<p><b>'Bilder tatt' dddd</b> : Bilder tatt Søndag</p>"
msgid "Enable this option if you want to download your pictures into automatically created file extension-based sub-albums of the destination album. This way, you can separate JPEG and RAW files as they are downloaded from your camera."
msgstr "Kryss av her hvis du vil laste bildene dine ned i mapper som opprettes automatisk under målalbumet basert på fil-etternavn. På den måten kan du skille JPEG – og RAW-bilder mens de lastes ned."
msgid "Set this option to show the file modification date below the image thumbnail if it is different than camera creation date. This option is useful to identify quickly which items have been modified."
"Set this option to render icon-view with large thumbnail size, for example in case of 4K monitor is used.\n"
"By default this option is turned off and the maximum thumbnail size is limited to 256x256 pixels. When this option is enabled, thumbnail size can be extended to 512x512 pixels.\n"
"This option will store more data in thumbnail database and will use more system memory. digiKam needs to be restarted to take effect, and Rebuild Thumbnails option from Maintenance tool needs to be processed over whole collections."
msgid "This option changes the size in which thumbnails are generated. You need to restart digiKam for this option to take effect. Furthermore, you need to regenerate all already stored thumbnails via the <interface>Tools / Maintenance</interface> menu."
"<p>Add new file types to show as album items.</p>"
"<p>digiKam attempts to support all of the image formats that digital cameras produce, while being able to handle a few other important video and audio formats.</p>"
" "
"<p>You can add to the already-appreciable list of formats that digiKam handles by adding the extension of the type you want to add. Multiple extensions need to be separated by a semicolon or space.</p>"
"<p><b><u>Note:</u> changes done in this view will perform a database rescan in the background.</b></p>"
msgstr "Flere filetternavn for &bildefiler (<a href='image'>Currently-supported types</a>):"
#. +> trunk5
#: core/utilities/setup/album/setupmime.cpp:115
#, kde-format
msgid ""
"<p>Here you can add the extensions of image files (including RAW files) to be displayed in the Album view. Just put \"xyz abc\" to display files with the xyz and abc extensions in your Album view.</p>"
"<p>You can also remove file formats that are shown by default by putting a minus sign in front of the extension: e.g. \"-gif\" would remove all GIF files from your Album view and any trace of them in your database. They would not be deleted, just not shown in digiKam.</p>"
"<p><b>Warning:</b> Removing files from the database means losing all of their tags and ratings.</p>"
msgstr ""
"<p>Her kan du legge til filetternavn for bildefiler (også RAW-filer) som skal vises i Albumvisningen. Bare skriv inn «xyz abc» for å få vist filer med endelsene xyz og abc i albumvisningen.</p>"
" "
"<p>Du kan også ta bort filformater som vises som standard ved å oppgi filetternavnet med et minus foran, f.eks. «-gif» vil fjerne alle GIFfiler fra albumvisningen og alle spor av dem i databasen. De vil ikke bli slettet, bare ikke vist i digiKam.</p>"
" "
"<p><b>Advarsel:</b> Om filer fjernes fra databasen mistes alle deres merker/etiketter og vurderinger.</p>"
msgstr "Flere filetternavn for &videofiler (<a href='video'>Currently-supported types</a>):"
#. +> trunk5
#: core/utilities/setup/album/setupmime.cpp:148
#, fuzzy, kde-format
#| msgid ""
#| "<p>Here you can add extra extensions of video files to be displayed in your Album view. Just write \"xyz abc\" to support files with the *.xyz and *.abc extensions. Clicking on these files will play them in an embedded KDE movie player.</p>"
#| "<p>You can also remove file formats that are supported by default by putting a minus sign in front of the extension: e.g. \"-avi\" would remove all AVI files from your Album view and any trace of them in your database. They would not be deleted, just not shown in digiKam.</p>"
#| "<p><b>Warning:</b> Removing files from the database means losing all of their tags and ratings.</p>"
msgid ""
"<p>Here you can add extra extensions of video files to be displayed in your Album view. Just write \"xyz abc\" to support files with the *.xyz and *.abc extensions. Clicking on these files will play them in an embedded video player.</p>"
"<p>You can also remove file formats that are supported by default by putting a minus sign in front of the extension: e.g. \"-avi\" would remove all AVI files from your Album view and any trace of them in your database. They would not be deleted, just not shown in digiKam.</p>"
"<p><b>Warning:</b> Removing files from the database means losing all of their tags and ratings.</p>"
msgstr ""
"<p>Her kan du legge til filetternavn for videofiler som skal vises i Albumvisningen. Bare skriv inn «xyz abc» for å få vist filer med endelsene xyz og abc i albumvisningen. Om du trykker på dem blir de spilt i en innebygget KDE filmspiller.</p>"
"<p>Du kan også ta bort filformater som vises som standard ved å oppgi filetternavnet med et minus foran, f.eks. «-avi» vil fjerne alle AVI-filer fra albumvisningen og alle spor av dem i databasen. De vil ikke bli slettet, bare ikke vist i digiKam.</p>"
" "
"<p><b>Advarsel:</b> Om filer fjernes fra databasen mistes alle deres merker/etiketter og vurderinger.</p>"
msgstr "Flere filetternavn for &lydfiler (<a href='audio'>Currently-supported types</a>):"
#. +> trunk5
#: core/utilities/setup/album/setupmime.cpp:183
#, kde-format
msgid ""
"<p>Here you can add extra extensions of audio files to be displayed in your Album view. Just write \"xyz abc\" to support files with the *.xyz and *.abc extensions. Clicking on these files will play them in an embedded audio player.</p>"
"<p>You can also remove file formats that are supported by default by putting a minus sign in front of the extension: e.g. \"-ogg\" would remove all OGG files from your Album view and any trace of them in your database. They would not be deleted, just not shown in digiKam.</p>"
"<p><b>Warning:</b> Removing files from the database means losing all of their tags and ratings.</p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/album/setupmime.cpp:195
#, kde-format
msgid "Enter additional audio file extensions."
msgstr ""
#. +> trunk5
#: core/utilities/setup/album/setupmime.cpp:258
#, kde-format
msgid ""
"<p>You have chosen to remove the following image formats from the list of supported formats: <b>%1</b>.</p>"
"<p>These are very common formats. If you have images in your collection with these formats, they will be removed from the database and you will lose all information about them, including rating and tags.</p>"
"<p>Are you sure you want to apply your changes and lose the support for these formats?</p>"
msgstr ""
"<p>Du har valgt å fjerne de følgende bildeformater fra listen over støttede formater: <b>%1</b>.</p>"
"<p>Dette er veldig vanlige formater. Dersom du har bilder i disse formatene kommer de til å bli fjernet fra databasen, og du mister all informasjon om dem; også karakterer og etiketter. </p>"
"<p>Vil du virkelig ta bort støtten for disse formatene?</p>"
#. +> trunk5
#: core/utilities/setup/album/setupmime.cpp:311
#, kde-format
msgid ""
"<p>Files with these extensions will be recognized as images and included into the database:<br/>"
" <code>%1</code></p>"
msgstr ""
"<p>Filer med disse etternavnene gjenkjennes som bilder og legges i databasen:<br/>"
" <code>%1</code></p>"
#. +> trunk5
#: core/utilities/setup/album/setupmime.cpp:321
#, fuzzy, kde-format
#| msgid ""
#| "<p>Files with these extensions will be recognized as movie files and included into the database:<br/>"
#| " <code>%1</code></p>"
msgid ""
"<p>Files with these extensions will be recognized as video files and included into the database:<br/>"
" <code>%1</code></p>"
msgstr ""
"<p>SFiler med disse etternavnene gjenkjennes som filmfiler og legges i databasen:<br/>"
" <code>%1</code></p>"
#. +> trunk5
#: core/utilities/setup/album/setupmime.cpp:331
#, kde-format
msgid ""
"<p>Files with these extensions will be recognized as audio files and included into the database:<br/>"
" <code>%1</code></p>"
msgstr ""
"<p>Filer med disse filetternavnene gjenkjennes som lydfiler og legges i databasen:<br/>"
" <code>%1</code></p>"
#. +> trunk5
#: core/utilities/setup/camera/cameralist.cpp:281
#, kde-format
msgid "Failed to auto-detect camera; please make sure it is connected properly and is turned on. Would you like to try again?"
msgstr "Klarte ikke å velge kamera automatisk. Se om kameraet er slått på og rett tilkoblet. Vil du prøve igjen?"
"<p>Set this option to load images at their full size for preview, rather than at a reduced size. As this option will make it take longer to load images, only use it if you have a fast computer.</p>"
"<p><b>Note:</b> for Raw images, a half size version of the Raw data is used instead of the embedded JPEG preview.</p>"
msgstr ""
"<p>Velg dette alternativet dersom du vil laste bildet i full størrelse inn i forhåndsvisningen i stedet for å laste bildet i redusert størrelse. Det kan ta lengre tid å laste inn bildet. Bruk dette valget bare dersom du har en rask datamaskin.</p>"
" "
"<p><b>Merk:</b> For RAW-bilder brukes en versjon i halv størrelse av RAW-data i stedet for den innebygde JPEG-forhåndsvisningen.</p>"
#| "<p>Below are the locations of your root albums used to store your images. Write access is necessary to be able to edit images in these albums.</p>"
#| "<p>Note: Removable media (such as USB drives or DVDs) and remote file systems (such as NFS, or Samba mounted with cifs/smbfs) are supported.</p>"
#| "<p></p>"
msgid ""
"<p>Below are the locations of your root albums used to store your images. Write access is necessary to be able to edit images in these albums.</p>"
"<p>Note: Removable media (such as USB drives or DVDs) and remote file systems (such as NFS, or Samba mounted with cifs/smbfs) are supported.</p>"
"<p>Important: You need to mount the share natively on your system before to setup a remote collection.</p>"
"<p></p>"
msgstr ""
"<p>Nedenfor vises plasseringen av rotalbumene som bildene dine lagres i. Du trenger skrivetilgang for å redigere bildene.</p>"
"<p>Merk: Du kan bruke flyttbare lagringsmedier (som USB-eneheter og DVDer) og fjerntliggende filsystemer (NFS og Samba). </p>"
msgid "If this option is enabled, over- and under-exposure indicators will be displayed only when pure white and pure black color matches, as all color components match the condition in the same time. Otherwise, indicators are turned on when one of the color components matches the condition."
msgstr "Hvis dette er slått på, vil indikatorer for over- og undereksponering bli vist bare når ren hvit og ren svart farge treffes, siden alle fargekomponenter treffer betingelsen samtidig. Ellers slås indikatorer på når en av fargekomponentene treffer betingelsen."
"<para><interface>Non-Destructive Editing and Versioning</interface> allows different versions of an image to be created, whilst always preserving the original image.</para>"
" "
"<para> All steps of the editing history are recorded and can be accessed later.</para>"
msgstr ""
"<para><interface>Ikke-destruktiv redigering og versjonering</interface> gjør at forskjellige versjoner av et bilde kan lages mens originalbildet hele tiden bevares.</para>"
" "
"<para> Alle steg i redigeringshistorien blir lagret og kan hentes fram senere.</para>"
#| "<title>Default File Format for Saving</title>"
#| "<para>Select the file format in which edited images are saved automatically. Format-specific options, like compression settings, can be configured on the <interface>Format Options</interface> tab.</para>"
#| "<para>"
#| "<list>"
#| "<item><filename>JPEG</filename>: JPEG is the most commonly used file format, but it employs lossy compression, which means that with each saving operation some image information will be irreversibly lost. JPEG offers a good compression rate, resulting in smaller files. </item>"
#| "<item><filename>PNG</filename>: A widely used format employing lossless compression. The files, though, will be larger because PNG does not achieve very good compression rates.</item>"
#| "<item><filename>TIFF</filename>: A commonly used format, usually uncompressed or with modest lossless compression. Resulting files will be large, but without quality loss due to compression. </item>"
#| "<item><filename>PGF</filename>: This is a technically superior file format offering good compression rates with either lossy or lossless compression. But it is not yet widely used and supported, so your friends may not directly be able to open these files, and you may not be able to directly publish them on the web. </item>"
#| "<item><filename>JPEG 2000</filename>: JPEG 2000 is similar to PGF. Loading or saving is slower, the compression rate is better, and the format more widely supported, though still not comparable to the tradition formats JPEG, PNG or TIFF. </item>"
#| "</list>"
#| "</para>"
msgctxt "@info:whatsthis"
msgid ""
"<title>Default File Format for Saving</title>"
"<para>Select the file format in which edited images are saved automatically. Format-specific options, like compression settings, can be configured on the <interface>Format Options</interface> tab.</para>"
"<para>"
"<list>"
"<item><emphasis strong='true'>JPEG</emphasis>: JPEG is the most commonly used file format, but it employs lossy compression, which means that with each saving operation some image information will be irreversibly lost. JPEG offers a good compression rate, resulting in smaller files. </item>"
"<item><emphasis strong='true'>PNG</emphasis>: A widely used format employing lossless compression. The files, though, will be larger because PNG does not achieve very good compression rates.</item>"
"<item><emphasis strong='true'>TIFF</emphasis>: A commonly used format, usually uncompressed or with modest lossless compression. Resulting files will be large, but without quality loss due to compression. </item>"
"<item><emphasis strong='true'>PGF</emphasis>: This is a technically superior file format offering good compression rates with either lossy or lossless compression. But it is not yet widely used and supported, so your friends may not directly be able to open these files, and you may not be able to directly publish them on the web. </item>"
"<item><emphasis strong='true'>JPEG 2000</emphasis>: JPEG 2000 is similar to PGF. Loading or saving is slower, the compression rate is better, and the format more widely supported, though still not comparable to the tradition formats JPEG, PNG or TIFF. </item>"
"</list>"
"</para>"
msgstr ""
"<title>Standard filformat for lagring</title>"
" "
"<para>Velg det filformatet som redigere bilder skal lagres automatisk med. Format-spesifikke valg, slik som komprimeringsinnstillinger, kan settes opp på fanebladet <interface>Formatvalg</interface>.</para>"
" "
"<para> "
"<list> "
"<item><filename>JPEG</filename>: JPEG er det mest brukte filformatet, men det bruker tapsbringende komprimering, som betyr at ved hver lagring går noe bildeinformasjon ugjenkallelig tapt. JPEG har god komprimeringsgrad, som resulterer i mindre filer.</item>"
" "
"<item><filename>PNG</filename>: Et mye brukt format som bruker tapsfri komprimering. Filene blir likevel større, fordi PNG ikke oppnår særlig god komprimeringsgrad.</item>"
" "
"<item><filename>TIFF</filename>: Et vanlig brukt format, som regel ukomprimert eller med minimal tapsfri komprimering. Resultatfilene er store, men har ingen kvalitetstap på grunn av komprimering.</item>"
" "
"<item><filename>PGF</filename>: Dette er et teknisk overlegent filformat som gir god komprimering med eller uten kvalitetstap. Men det er ennå ikke vidt brukt og utbredt, så dinne venner kan kanskje ikke åpne disse filene direkte, og du kan kanskje heller ikke legge dem direkte ut på nettet.</item>"
" "
"<item><filename>JPEG 2000</filename>: JPEG 2000 likner på PGF. Det går langsommere å lagre og laste inn, komprimeringsgraden er bedre, og der er bredere støtte for formatet, men ennå ikke sammenlignbart med de tradisjonelle formatene JPEG, PNG eller TIFF.</item>"
#| "<para>First and foremost, the <emphasis>original image will never be overwritten.</emphasis> Instead, when an image is edited, a new file is created: The <interface>current version</interface>.</para>"
#| " "
#| "<para>You can also create multiple <interface>versions</interface> deriving from the same <interface>original image</interface>.</para>"
#| " "
#| "<para>In addition to these files representing a current version, digiKam can take and keep additional, <interface>intermediate snapshots</interface> during the editing process. This can be useful if you want to preserve the intermediate steps for later access, for example if some editing steps cannot be automatically reproduced.</para>"
#| " "
msgctxt "@info:whatsthis"
msgid ""
"<para>First and foremost, the <emphasis>original image will never be overwritten.</emphasis> Instead, when an image is edited, a new file is created: The <interface>current version</interface>.</para>"
" "
"<para>You can also create multiple <interface>versions</interface> deriving from the same <interface>original image</interface>.</para>"
" "
"<para>In addition to these files representing a current version, digiKam can take and keep additional, <interface>intermediate snapshots</interface> during the editing process. This can be useful if you want to preserve the intermediate steps for later access, for example if some editing steps cannot be automatically reproduced.</para>"
msgstr ""
"<para>Først og fremst, <emphasis>originalbildet blir aldri overskrevet.</emphasis> I stedet blir det laget en ny fil: <interface>gjeldende versjon</interface> når et bilde redigeres. </para>"
" "
"<para>Du kan også lage flere <interface>versjoner</interface> fra det samme <interface>originalbildet</interface>.</para>"
" "
"<para> I tillegg til disse filene som representerer en gjeldende versjon kan digikam ta og lagre <interface>mellomstadier</interface> i løpet av redigeringsprosessen. Dette kan være nyttig dersom du vil beholde mellomstadiene for senere bruk, for eksempel hvis noen steg i redigeringen ikke kan gjenskapes automatisk.</para>"
"<para>If an image has been edited, only the <interface>current versions</interface> will be shown in the main thumbnail view. From the <interface>right sidebar</interface>, you always have access to all hidden files.</para>"
" "
"<para>With the options here, you can choose to show certain files permanently.</para>"
msgstr ""
"<para>Hvis et bilde er blitt redigert, så er det bare <interface>gjeldende versjoner</interface> som vises i hoved-småbildevisningen. Du har alltid tilgang til alle skjulte filer via <interface>høyre sidestolpe</interface>. </para>"
" "
"<para>Med valgene her kan du velge å vise visse filer permanent.</para>"
"<para>In addition to the pixel content, image files usually contain a variety of metadata. A lot of the parameters you can use in digiKam to manage files, such as rating or comment, can be written to the files' metadata.</para>"
" "
"<para>Storing in metadata allows one to preserve this information when moving or sending the files to different systems.</para>"
msgstr ""
"<para>I tillegg til pikslene inneholder bildefiler som regel ymse metadata. Mange av parametrene du kan bruke i digiKam til å håndtere filer, slik som vurdering og kommentarer, kan skrives i filenes metadata.</para>"
" "
"<para>At det lagres i metadata gjør at disse opplysningene blir bevart når filer flyttes eller sendes til andre systemer.</para>"
msgid "Instead of synchronizing metadata, just schedule it for synchronization.Synchronization can be done later by triggering the apply pending, or at digikam exit"
msgid "Turn on this option to write metadata into RAW TIFF/EP files. This feature requires the Exiv2 shared library, version >= 0.18.0. It is still experimental, and is disabled by default."
msgstr "Velg dette for å skrive metadata i RAW TIFF/EP filer, Til dette kreves Exiv2-biblioteket i versjon >= 0.18.0. Dette er fremdeles på eksperimentstadiet og standardmessig ikke skrudd på."
msgid "Turn off this option to not update file timestamps when files are changed as when you update metadata or image data. Note: disabling this option can introduce some dysfunctions with applications which use file timestamps properties to detect file modifications automatically."
msgstr "Slå av dette for å hindre at tidsstempelet i fila oppdateres når filer endres som når du oppdaterer metadata eller bildedata. Merk: dette kan innføre feilfunksjoner i programmer som bruker tidsstempler til å oppdage filendringer automatisk."
msgid "Turning this option on, will force digiKam to rescan files that has been modified outside digiKam. If a file has changed it is file size or if the last modified timestamp has changed, a rescan of that file will be performed when digiKam starts."
msgid "Turning this option on, will force digiKam to delete the file metadata contained in the database before the file is rescanned. WARNING: if your metadata has been written to the database only and not to the file or sidecar, you will be able to lose inserted metadata such as tags, keywords, or geographic coordinates."
#| "<para>A file can be rotated in two ways:<br/>"
#| " You can change the contents, rearranging the individual pixels of the image data.<br/>"
#| " Or you can set a flag that the file is to be rotated before it is shown.</para>"
#| " "
#| "<para>Select this option if you always want to set only a flag. This is less obtrusive, but requires support if the file is accessed with another software. Ensure to allow setting the flag in the metadata if you want to share your files outside digiKam.</para>"
msgctxt "@info:whatsthis"
msgid ""
"<para>A file can be rotated in two ways:<nl/>"
" You can change the contents, rearranging the individual pixels of the image data.<nl/>"
" Or you can set a flag that the file is to be rotated before it is shown.</para>"
" "
"<para>Select this option if you always want to set only a flag. This is less obtrusive, but requires support if the file is accessed with another software. Ensure to allow setting the flag in the metadata if you want to share your files outside digiKam.</para>"
msgstr ""
"<para>En fil kan roteres på to måter:<br/>"
" Du kan endre innholdet, slik at hver piksel i bildet blir flyttet på.<br/>"
" Eller du kan sette et flagg (et merke) som viser at fila skal roteres før den blir vist fram.</para>"
" "
"<para>Velg dette hvis du bare vil sette et flagg. Dette er mindre påtrengende, men hvis fila brukes med annen programvare må denne ha støtte for det. Pass på at det er tillatt å sette flagget i metadata hvis du vil dele filene dine utenfor digiKam.</para>"
#| "<para>A file can be rotated in two ways:<br/>"
#| " You can change the contents, rearranging the individual pixels of the image data.<br/>"
#| " Or you can set a flag that the file is to be rotated before it is shown.</para>"
#| " "
#| "<para>Select this option if you want the file to be rotated by changing the content. This is a lossless operation for JPEG files. For other formats it is a lossy operation, which you need to enable explicitly. It is not support for RAW and other read-only formats, which will be rotated by flag only.</para>"
msgctxt "@info:whatsthis"
msgid ""
"<para>A file can be rotated in two ways:<nl/>"
" You can change the contents, rearranging the individual pixels of the image data.<nl/>"
" Or you can set a flag that the file is to be rotated before it is shown.</para>"
" "
"<para>Select this option if you want the file to be rotated by changing the content. This is a lossless operation for JPEG files. For other formats it is a lossy operation, which you need to enable explicitly. It is not support for RAW and other read-only formats, which will be rotated by flag only.</para>"
msgstr ""
"<para>En fil kan roteres på to måter:<br/>"
" Du kan endre innholdet, slik at hver piksel i bildet blir flyttet på.<br/>"
" Eller du kan sette et flagg (et merke) som viser at fila skal roteres før den blir vist fram.</para>"
" "
"<para>Velg dette hvis du vil at fila skal roteres ved å endre filinnholdet. For JPEG-filer er dette en tapsfri operasjon. For andre formater er det tapsbringende, og må uttrykkelig slås på. Det er ikke støttet for RAW og andre skrivebeskyttede formater, som bare kan roteres ved flagg.</para>"
msgid "For some file formats which apply lossy compression, data will be lost each time the content is rotated. Check this option to allow lossy rotation. If not enabled, these files will be rotated by flag."
msgstr "For noen filformater som bruker tapsbringende kompresjon blir det mistet noe informasjon hver gang innholdet roteres. Velg dette for å tillate tapsbringende rotering. Disse filene vil bli rotert ved flagg hvis dette valget ikke er slått på."
msgid "<b>Note: These settings affect the album view and not the image editor. The image editor always changes the image data during the rotation.</b>"
#| msgid "Turn on this option if you want to apply changes to rating, comments and tags made in Nepomuk to digiKam's metadata storage. Please note that image metadata will not be edited automatically."
msgid "Turn on this option if you want to apply changes to rating, comments and tags made in Baloo to digiKam's metadata storage. Please note that image metadata will not be edited automatically."
msgstr "Slå på dette hvis du vil bruke endringer i karakter, kommentarer og etiketter gjort i Nepomuk til metadata i digiKams lager.Merk at biildemetadata ikke blir redigert automatisk."
#| "<p><a href='http://nepomuk.kde.org'>Nepomuk</a> provides the basis to handle all kinds of metadata on the KDE desktop in a generic fashion. It allows you to tag, rate and comment your files in KDE applications like Dolphin.</p>"
#| " "
#| "<p>Please set here if you want to synchronize the metadata stored by digiKam desktop-wide with the Nepomuk Semantic Desktop.</p>"
#| " "
#| "<p>If you have enabled writing of metadata to files, please note that changes done through Nepomuk are not automatically applied to the image's metadata when read into digiKam's database.</p>"
#| " "
msgid ""
"<p><a href='http://community.kde.org/Baloo'>Baloo</a> provides the basis to handle all kinds of metadata on the KDE desktop in a generic fashion. It allows you to tag, rate and comment your files in KDE applications like Dolphin.</p>"
" "
"<p>Please set here if you want to synchronize the metadata stored by digiKam desktop-wide with the Baloo Desktop Search.</p>"
" "
msgstr ""
"<p><a href=\"http://nepomuk.kde.org\">Nepomuk</a> er grunnlaget fot å håndtere alle slags metadata på KDE-skrivebordet på en generisk måte. Nepomuk gjør at du kan merke, vurdere og kommentere filene dine i KDE-programmer som Dolphin.</p>"
" "
"<p>Oppgi her om du vil samordne metadata som lagres av digiKam med Nepomuk Semantic Desktop for hele skrivebordet.</p>"
" "
"<p>Hvis du har slått på at metadata skrives til filer, så merk at endringer gjort gjennom Nepomuk ikke automatisk overføres til bildets metadata når de leses inn i digiKams database.</p>"
"<p>Add file types to be recognised as sidecars.</p>"
"<p>digiKam (optionally) writes metadata to *.xmp sidecar files. Other programs might use different types, which can be specified below. digiKam will neither display these nor read from or write to them. But whenever a matching album item (e.g. \"image.dng\" for \"image.dng.pp3\") is renamed, moved, copied or deleted, the same operation will be done on these sidecar files.</p>"
"<p>Multiple extensions must be separated by a semicolon or a space.</p>"
msgid "<p>Here you can add extra extensions of sidecars files to be processed alongside regular items. These files will not be visible, but regarded as an extension of the main file. Just write \"xyz abc\" to support files with the *.xyz and *.abc extensions. The internally used sidecars type *.xmp is always included.</p>"
msgid "Switching off exif auto rotation will most probably show your images in a wrong orientation, so only change this option if you explicitly require this."
msgid "Switching on this option and your metadata has been written to the database only and not to the file or sidecar, you will be able to lose inserted metadata such as tags, keywords, or geographic coordinates."
"<p><b>Do you really want to enable metadata writing to RAW files?</b></p>"
"<p>DigiKam delegates this task to the Exiv2 library. With different RAW formats, problems are known which can lead to the destruction of RAW files. If you decide to do so, make a backup of your RAW files.</p>"
"<p><b>We strongly recommend not to enable this option.</b></p>"
msgid "You would rather disable writing metadata to RAW files?"
msgstr "Skriver metadata til filer"
#. +> trunk5
#: core/utilities/setup/setup.cpp:149
#, kde-format
msgid "Database"
msgstr "Database"
#. +> trunk5
#: core/utilities/setup/setup.cpp:150
#, kde-format
msgid ""
"<qt>Database Settings<br/>"
"<i>Customize database settings</i></qt>"
msgstr ""
"<qt>Databaseinnstillinger<br/>"
"<i>Tilpass databaseinnstillinger</i></qt>"
#. +> trunk5
#: core/utilities/setup/setup.cpp:155
#, kde-format
msgid "Collections"
msgstr "Samlinger"
#. +> trunk5
#: core/utilities/setup/setup.cpp:156
#, fuzzy, kde-format
#| msgid ""
#| "<qt>Collections Settings<br/>"
#| "<i>Set root albums and database locations</i></qt>"
msgid ""
"<qt>Collections Settings<br/>"
"<i>Set root albums locations</i></qt>"
msgstr ""
"<qt>Samlingsinnstillinger<br/>"
"<i>Oppgi rot-albumer og databasesteder</i></qt>"
#. +> trunk5
#: core/utilities/setup/setup.cpp:162
#, kde-format
msgid ""
"<qt>Application Views Settings<br/>"
"<i>Customize the look of the views</i></qt>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setup.cpp:167
#, kde-format
msgid "Tool-Tip"
msgstr "Hjelpeboble"
#. +> trunk5
#: core/utilities/setup/setup.cpp:168
#, fuzzy, kde-format
#| msgid ""
#| "<qt>Album Items Tool-Tip Settings<br/>"
#| "<i>Customize information in tool-tips</i></qt>"
msgid ""
"<qt>Items Tool-Tip Settings<br/>"
"<i>Customize information in item tool-tips</i></qt>"
msgstr ""
"<qt>Innstillinger for hjelpebobler på album-elementer<br/>"
"<i>Sett opp informasjon i hjelpebobler</i></qt>"
#. +> trunk5
#: core/utilities/setup/setup.cpp:179
#, kde-format
msgid "Templates"
msgstr "Maler"
#. +> trunk5
#: core/utilities/setup/setup.cpp:180
#, kde-format
msgid ""
"<qt>Metadata templates<br/>"
"<i>Manage your collection of metadata templates</i></qt>"
msgstr ""
"<qt>Metadata-maler<br/>"
"<i>Behandle samlingen av metadata-maler</i></qt>"
#. +> trunk5
#: core/utilities/setup/setup.cpp:186
#, fuzzy, kde-format
#| msgid ""
#| "<qt>Image Editor Settings<br/>"
#| "<i>Customize image editor behavior</i></qt>"
msgid ""
"<qt>Image Editor Settings<br/>"
"<i>Customize the image editor settings</i></qt>"
msgstr ""
"<qt>Innstillinger for bilderedigering<br/>"
"<i>Tilpass oppførsel for bilderedigeringen</i></qt>"
#. +> trunk5
#: core/utilities/setup/setup.cpp:192
#, kde-format
msgid ""
"<qt>Settings for Color Management<br/>"
"<i>Customize the color management settings</i></qt>"
msgstr ""
"<qt>Innstillinger for fargestyring<br/>"
"<i>Tilpass oppsettet for fargestyring</i></qt>"
#. +> trunk5
#: core/utilities/setup/setup.cpp:198
#, kde-format
msgid ""
"<qt>Light Table Settings<br/>"
"<i>Customize tool used to compare images</i></qt>"
msgstr ""
"<qt>Innstillinger for lysbord<br/>"
"<i>Tilpass verktøyet som brukes til å sammenligne bilder</i></qt>"
#. +> trunk5
#: core/utilities/setup/setup.cpp:210
#, fuzzy, kde-format
#| msgid "<qt>Image Quality Sorter Settings<br/>"
msgid "<qt>Image Quality Sorter Settings</qt>"
msgstr "<qt>Innstillinger for sortering på bildekvalitet<br/>"
#. +> trunk5
#: core/utilities/setup/setup.cpp:215
#, kde-format
msgid ""
"<qt>Camera Settings<br/>"
"<i>Manage your camera devices</i></qt>"
msgstr ""
"<qt>Kamerainnstillinger<br/>"
"<i>Behandle kameraenhetene dine</i></qt>"
#. +> trunk5
#: core/utilities/setup/setup.cpp:224
#, kde-format
msgid ""
"<qt>Plug-in Settings<br/>"
"<i>Set which plugins will be accessible from application</i></qt>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setup.cpp:230
#, kde-format
msgid ""
"<qt>Miscellaneous Settings<br/>"
"<i>Customize behavior of the other parts of digiKam</i></qt>"
msgstr ""
"<qt>Diverse innstillinger<br/>"
" <i>Tilpass oppførselen til de andre delene av digiKam</i></qt>"
#. +> trunk5
#: core/utilities/setup/setupdatabase.cpp:114
#, fuzzy, kde-format
#| msgid "Data Image Settings"
msgctxt "@title:tab"
msgid "Database Settings"
msgstr "Databilde-innstillinger"
#. +> trunk5
#: core/utilities/setup/setupdatabase.cpp:122
#, kde-format
msgid ""
"<p>Set the names of directories that you want to ignore from your photo collections. The names are case sensitive and should be separated by a semicolon.</p>"
"<p>This is for example useful when you store your photos on a Synology NAS (Network Attached Storage). In every directory the system creates a subdirectory @eaDir to store thumbnails. To avoid digiKam inserting the original photo and its corresponding thumbnail twice, @eaDir is ignored by default.</p>"
"<p>To re-include directories that are ignored by default prefix it with a minus, e.g. -@eaDir.</p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupdatabase.cpp:140
#, kde-format
msgid "Additional directories to ignore (<a href='image'>Currently ignored directories</a>):"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupdatabase.cpp:145
#, kde-format
msgid "Enter directories that you want to ignore from adding to your collections."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupdatabase.cpp:166
#, fuzzy, kde-format
#| msgid "Directories"
msgctxt "@title:tab"
msgid "Ignored Directories"
msgstr "Mapper"
#. +> trunk5
#: core/utilities/setup/setupdatabase.cpp:263
#, fuzzy, kde-format
#| msgctxt "@info"
#| msgid ""
#| "<para>The process of updating the file hashes takes a few minutes.</para>"
#| " "
#| "<para>Please ensure that any important collections on removable media are connected. <note>After the upgrade you cannot use your database with a digiKam version prior to 2.0.</note></para>"
#| " "
#| "<para>Do you want to begin the update?</para>"
msgctxt "@info"
msgid ""
"<p>The process of updating the file hashes takes a few minutes.</p>"
" "
"<p>Please ensure that any important collections on removable media are connected. <i>After the upgrade you cannot use your database with a digiKam version prior to 2.0.</i></p>"
" "
"<p>Do you want to begin the update?</p>"
msgstr ""
"<para>Det tar noen minutter å oppdatere fil-hashene.</para>"
" "
"<para>Pass på at viktige samlinger på eksterne medier er koblet til. <note>Etter oppgraderingen kan du ikke bruke databasen med en digiKam-versjon før 2.0.</note></para>"
" "
"<para>Vil du starte oppdateringen?</para>"
#. +> trunk5
#: core/utilities/setup/setupdatabase.cpp:278
#, kde-format
msgctxt "@title:group"
msgid "Updates"
msgstr "Oppdateringer"
#. +> trunk5
#: core/utilities/setup/setupdatabase.cpp:281
#, kde-format
msgctxt "@action:button"
msgid "Update File Hashes"
msgstr "Oppdater fil-hasher"
#. +> trunk5
#: core/utilities/setup/setupdatabase.cpp:283
#, fuzzy, kde-format
#| msgctxt "@info:tooltip"
#| msgid ""
#| "File hashes are used to identify identical files and to display thumbnails. A new, improved algorithm to create the hash is now used. The old algorithm, though, still works quite well, so it is recommended to carry out this upgrade, but not required.<nl/>"
#| " <note>After the upgrade you cannot use your database with a digiKam version prior to 2.0.</note>"
msgctxt "@info:tooltip"
msgid ""
"<qt>File hashes are used to identify identical files and to display thumbnails. A new, improved algorithm to create the hash is now used. The old algorithm, though, still works quite well, so it is recommended to carry out this upgrade, but not required.<br/>"
" After the upgrade you cannot use your database with a digiKam version prior to 2.0.</qt>"
msgstr ""
"Fil-hasher brukes til å identifisere filer som er like og til å vise miniatyrbilder. Nå brukes det en ny, forbedret algoritme til å opprette hashen. Den gamle algoritmen virker fremdeles helt bra, så det anbefales å gjøre oppgraderingen, men det er ikke nødvendig.<nl/>"
" <note>Etter oppgradering kan du ikke bruke databasen med en digiKam-versjon før 2.0.</note>"
#. +> trunk5
#: core/utilities/setup/setupdatabase.cpp:292
#, kde-format
msgctxt "@info:tooltip"
msgid "Get information about <interface>Update File Hashes</interface>"
msgstr "Hent informasjon om <interface>Oppdatere fil-hasher</interface>"
#. +> trunk5
#: core/utilities/setup/setupdatabase.cpp:316
#, kde-format
msgid ""
"<p>Directories starting with a dot are ignored by default.<br/>"
" <code>%1</code></p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:187
#, kde-format
msgid "Enable Color Management"
msgstr "Tillat fargestyring"
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:188
#, kde-format
msgid ""
"<ul>"
"<li>Checked: Color Management is enabled</li>"
"<li>Unchecked: Color Management is disabled</li>"
"</ul>"
msgstr ""
"<ul>"
"<li>Avkrysset : fargestyring er mulig</li>"
"<li>Ikke avkrysset: Fargestyring er ikke mulig</li>"
"</ul>"
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:195
#, kde-format
msgid "Visit Little CMS project website"
msgstr "Gå til nettstedet til Little CMS-prosjektet."
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:205
#, kde-format
msgid "Working Color Space"
msgstr "Arbeidsfargerom"
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:211
#, fuzzy, kde-format
#| msgid "<p>This is the color space all the images will be converted to when opened (if you choose to convert) and the profile that will be embedded when saving. Good and safe choices are <b>Adobe RGB (1998)</b> and <b>sRGB IEC61966-2.1</b>"
msgid "<p>This is the color space all the images will be converted to when opened (if you choose to convert) and the profile that will be embedded when saving. Good and safe choices are <b>Adobe RGB (1998)</b> and <b>sRGB IEC61966-2.1</b></p>"
msgstr "<p>Alle bilder blir konvertert til dette fargerommet når de åpnes (hvis du velger å konvertere) og profilen som vil bli bygd inn ved lagring. Gode og trygge valg er <b>Adobe RGB (1998)</b> og <b>sRGB IEC61966-2.1</b>"
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:217
#, kde-format
msgid "<p>You can use this button to get more detailed information about the selected workspace profile.</p>"
msgstr "<p>Trykk på denne knappen for å få kjennskap til flere detaljer om profilen du har valgt for arbeidsområdet.</p>"
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:231
#, kde-format
msgid "When the profile of an image does not match the working color space"
msgstr "Når profilen til et bilde ikke stemmer med arbeidsfargerommet"
msgid "<p>If an image has an embedded color profile not matching the working space profile, digiKam will ask if you want to convert to the working space, keep the embedded profile or discard the embedded profile and assign a different one.</p>"
msgstr "<p>Hvis et bilde har en innebygd fargeprofil som ikke stemmer med arbeidsromprofilen, så vil digiKam spørre om du vil konvertere til arbeidsfargerommet, beholde den innebygde profilen eller forkaste den innebygde profilen og tilordne en annen.</p>"
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:246
#, kde-format
msgid "Convert the image to the working color space"
msgstr "Konverter bildet til arbeidsfargerommet"
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:247
#, kde-format
msgid "<p>If an image has an embedded color profile not matching the working space profile, digiKam will convert the image's color information to the working color space. This changes the pixel data, but not the appearance of the image.</p>"
msgstr "<p>Hvis et bilde har en innebygd fargeprofil som ikke stemmer med arbeidsfargerommets profil, så vil digiKam konvertere bildets fargeinformasjon til arbeidsfargerommet. Dette endrer pikseldataene, men ikke utseendet på bildet.</p>"
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:263
#, kde-format
msgid "When an image has no color profile information"
msgstr "Når bildet ikke har noen informasjon om fargeprofil"
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:271
#, kde-format
msgid "<p>If an image has no embedded color profile, digiKam will ask which color space shall be used to interpret the image and to which color space it shall be transformed for editing.</p>"
msgstr "<p>Hvis et bilde ikke har en innebygd fargeprofil, så vil digiKam spørre hvilket fargerom som skal brukes til å tolke bildet, og til hvilket fargerom det skal konverteres for redigering.</p>"
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:275
#, kde-format
msgid "Assume it is using the sRGB color space (Internet standard)"
msgstr "Anta at det bruker sRGB-fargerommet (internettstandard)"
#. i18n("<p></p>"));
#.
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:280
#, kde-format
msgid "and convert it to the working color space"
msgstr "og konverter det til arbeidsfargerommet"
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:292
#, kde-format
msgid "Assume it is using the working color space"
msgstr "Anta at det bruker arbeidsfargerommet"
#. i18n("<p></p>"));
#.
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:297
#, kde-format
msgid "Convert it from default input color space to working space"
msgstr "Omform det fra standard inndata-fargerom til arbeidsfargerom"
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:315
#, kde-format
msgid "When loading a RAW file with uncalibrated colors"
msgstr "Når det lastes inn en RAW-fil med ukalibrert farge"
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:322
#, kde-format
msgid "Ask for the input profile"
msgstr "Spør etter inndataprofil"
#. i18n("<p></p>"));
#.
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:327
#, kde-format
msgid "Automatic color correction"
msgstr "Automatisk fargerettelse"
#. i18n("<p></p>"));
#.
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:332
#, kde-format
msgid "Convert it from the default input profile"
msgstr "Omform den fra standard inndataprofil"
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:356
#, kde-format
msgid "Color Managed View"
msgstr "Visning med fargestyring"
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:361
#, kde-format
msgid "Monitor profile:"
msgstr "Skjermens profil:"
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:365
#, kde-format
msgid "<p>Select the color profile for your monitor here.</p>"
msgstr "<p>Velg skjermens fargeprofil</p>"
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:369
#, kde-format
msgid "<p>You can use this button to get more detailed information about the selected monitor profile.</p>"
msgstr "<p>Du kan trykke på denne knappen for å få vite flere detaljer om den valgte skjermprofilen.</p>"
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:373
#, kde-format
msgid "Use color managed view in editor"
msgstr "Bruk visning med fargestyring i redigeringen"
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:374
#, kde-format
msgid "<p>Turn on this option if you want to use your <b>Monitor Color Profile</b> to show your pictures in the Image Editor window with a color correction adapted to your monitor. You can at any time toggle this option from the Editor window. <i>Warning</i>: This can slow down rendering of the image, depending on the speed of your computer.</p>"
msgstr ""
"<p>Velg dette alternativet dersom du vil bruke <b> fargeprofilen for skjermen</b> din for å vise bilder i bilderedigeringen med fargekorreksjon for skjermen. Du kan når som helst skur dette alternativet av eller på fra redigeringen<i> Advarsel</i>: Dette alternativet kan føre til at det tar lang tid å framstille et bilde, avhengig av datamaskinens hastighet.</p>"
">"
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:381
#, kde-format
msgid "Use color managed view for previews and thumbnails"
msgstr "Bruk visning med fargestyring i forhåndsvisning og minibilder"
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:396
#, kde-format
msgid "Camera and Scanner"
msgstr "Kamera og skanner"
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:401
#, kde-format
msgid "Default input color profile:"
msgstr "Standard inndata fargeprofil:"
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:403
#, kde-format
msgid "<p>This is the default color profile for your input device (that is your camera - or your scanner). A camera input profile is recommended for correct conversion of RAW images in 16bit. Some of the options about loading behavior above refer to this profile.</p>"
msgstr "<p>Dette er standard fargeprofil for din inndata-enhet (dvs. kameraet eller skanneren). For korrekt konvertering av RAW-bilder i 16-bit anbefales en inndata-profil for kamera. Noen av valgene for innlastingsoppførsel over refererer til denne profilen.</p>"
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:410
#, kde-format
msgid "<p>You can use this button to get more detailed information about the selected input profile.</p>"
msgstr "<p>Trykk på denne knappen for å få kjennskap til flere detaljer om profilen du har valgt for inndata.</p>"
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:421
#, kde-format
msgid "Printing and Proofing"
msgstr "Utskrift og forhåndsvisning"
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:426
#, kde-format
msgid "Output device profile:"
msgstr "Utdataenhetens profil:"
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:435
#, kde-format
msgid "<p>You can use this button to get more detailed information about the selected proofing profile.</p>"
msgstr "<p>Trykk på denne knappen for å få kjennskap til flere detaljer om profilen du har valgt for forhåndsvisning.</p>"
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:446
#, kde-format
msgid "Color Profiles Repository"
msgstr "Oppbevaringssted for fargeprofiler"
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:451
#, kde-format
msgid "digiKam looks for ICC profiles in a number of <a href='default'>default locations</a>. You can specify an additional folder:"
msgstr "digiKam ser etter ICC-profiler på en del <a href='default'>standard steder</a>. Du kan oppgi en ekstra mappe:"
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:459
#, kde-format
msgid "<p>digiKam searches ICC profiles in default system folders and ships itself a few selected profiles. Store all your additional color profiles in the directory set here.</p>"
msgstr "<p>digiKam leter etter ICC-profiler i standard systemmapper og sender seg selv noen utvalgte profiler. Lagre alle dine ekstra fargeprofiler i mappa som er oppgitt her.</p>"
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:482
#, kde-format
msgid "Use black point compensation"
msgstr "Bruk erstatning for svart-punkt."
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:483
#, kde-format
msgid "<p><b>Black Point Compensation</b> is a way to make adjustments between the maximum black levels of digital files and the black capabilities of various digital devices.</p>"
msgstr "<p>Med<b>erstatning for svart-punkt.</b>kan du gjøre justeringer mellom det høyeste svart-nivået til digitale filer og svart-egenskapene til ulike digitale enheter.</p>"
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:489
#, kde-format
msgid "Rendering Intents:"
msgstr "Gjengivelsesformål:"
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:505
#, kde-format
msgid "Profiles"
msgstr "Profiler"
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:699
#, kde-format
msgid "Monitor Profile From System Settings"
msgstr "Monitorprofil fra systemoppsettet"
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:731
#, kde-format
msgid "No ICC profiles files found."
msgstr "Ingen ICC fargeprofiler"
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:746
#, kde-format
msgid "No Display Profile Available"
msgstr "Ingen visningsprofiler er tilgjengelige"
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:748
#, kde-format
msgid "No Output Profile Available"
msgstr "Ingen utdataprofiler er tilgjengelige"
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:878
#, kde-format
msgctxt "none of the paths"
msgid "none"
msgstr "ingen"
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:887
#, kde-format
msgid ""
"On Windows, the default search paths include "
"<ul>"
"<li>%1/Windows/Spool/Drivers/Color/</li>"
"<li>%2/Windows/Color/</li>"
"</ul>"
"On your system, currently these paths exist and are scanned:"
"<ul>"
"<li>%3</li>"
"</ul>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:901
#, kde-format
msgid ""
"On Mac OS X, the default search paths include "
"<ul>"
"<li>/System/Library/ColorSync/Profiles</li>"
"<li>/Library/ColorSync/Profiles</li>"
"<li>~/Library/ColorSync/Profiles</li>"
"<li>/opt/local/share/color/icc</li>"
"<li>/opt/digikam/share/color/icc</li>"
"<li>~/.local/share/color/icc/</li>"
"<li>~/.local/share/icc/</li>"
"<li>~/.color/icc/</li>"
"</ul>"
"On your system, currently these paths exist and are scanned:"
"<ul>"
"<li>%1</li>"
"</ul>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:918
#, kde-format
msgid ""
"On Linux, the default search paths include "
"<ul>"
"<li>/usr/share/color/icc</li>"
"<li>/usr/local/share/color/icc</li>"
"<li>~/.local/share/color/icc/</li>"
"<li>~/.local/share/icc/</li>"
"<li>~/.color/icc/</li>"
"</ul>"
"On your system, currently these paths exist and are scanned:"
"<ul>"
"<li>%1</li>"
"</ul>"
msgstr ""
"På Linux er standard søkestiene "
"<ul>"
"<li>/usr/share/color/icc</li>"
"<li>/usr/local/share/color/icc</li>"
"<li>~/.local/share/color/icc/</li>"
"<li>~/.local/share/icc/</li>"
"<li>~/.color/icc/</li>"
"</ul>"
" På systemet ditt finnes nå disse stiene og blir skannet:"
"<ul>"
"<li>%1</li>"
"</ul>"
#. +> trunk5
#: core/utilities/setup/setuplighttable.cpp:98
#, kde-format
msgid "Synchronize panels automatically"
msgstr "Samordne paneler automatisk"
#. +> trunk5
#: core/utilities/setup/setuplighttable.cpp:99
#, kde-format
msgid "Set this option to automatically synchronize zooming and panning between left and right panels if the images have the same size."
msgstr "Velg dette alternativet for å synkronisere automatisk zoom/pan mellom høyre og venstre bilderute hvis bildene er av samme størrelse."
#. +> trunk5
#: core/utilities/setup/setuplighttable.cpp:103
#, kde-format
msgid "Selecting a thumbbar item loads the image to the right panel"
msgstr "Ved å velge en av miniatyrene lastes bildet i det høyre panelet"
#. +> trunk5
#: core/utilities/setup/setuplighttable.cpp:105
#, kde-format
msgid "Set this option to automatically load an image into the right panel when the corresponding item is selected on the thumbbar."
msgstr "Velg dette alternativet for å laste bilde opp i høyre panel automatisk når det tilsvarende elementet velges blant miniatyrene"
#. +> trunk5
#: core/utilities/setup/setuplighttable.cpp:108
#, kde-format
msgid "Clear the light table on close"
msgstr "Tøm lysbordet når det lukkes"
#. +> trunk5
#: core/utilities/setup/setuplighttable.cpp:109
#, kde-format
msgid "Set this option to remove all images from the light table when you close it, or unset it to preserve the images currently on the light table."
msgstr "Velg dette for å fjerne alle bilder fra lysbordet når du lukker det, eller ta bort valget for å beholde de bildene som nå ligger på lysbordet."
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:137
#, kde-format
msgid "String comparison type:"
msgstr "Sammenlikningstype for strenger:"
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:139
#, kde-format
msgctxt "method to compare strings"
msgid "Natural"
msgstr "Naturlig"
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:140
#, kde-format
msgctxt "method to compare strings"
msgid "Normal"
msgstr "Normal"
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:141
#, kde-format
msgid ""
"<qt>Sets the way in which strings are compared inside digiKam. This eg. influences the sorting of the tree views.<br/>"
"<b>Natural</b> tries to compare strings in a way that regards some normal conventions and will eg. result in sorting numbers naturally even if they have a different number of digits.<br/>"
"<b>Normal</b> uses a more technical approach. Use this style if you eg. want to entitle albums with ISO dates (201006 or 20090523) and the albums should be sorted according to these dates.</qt>"
msgstr ""
"<qt>Angir hvordan strenger sammenliknes inni digiKam. Dette påvirker for eksempel sortering i trevisningene.<br/>"
"<b>Naturlig</b> forsøker å sammenlikne strenger på en måte som tar hensyn til en del normale konvensjoner og vil f.eks. sortere tall naturlig selv om de har forskjellige antall sifre.<br/>"
"<b>Normal</b>bruker en mer teknisk tilnærming. Bruk denne hvis du f.eks. vil gi albumer titler med ISO-datoer (201006 eller 2++0+523) og vil sortere albumene etter disse datoene.</qt>"
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:151
#, kde-format
msgid "Confirm when moving items to the &trash"
msgstr "Be om bekref&telse når elementer skal flyttes til papirkurven"
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:152
#, kde-format
msgid "Confirm when permanently deleting items"
msgstr "Be om bekreftelse når elementer skal slettes for alltid"
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:153
#, kde-format
msgid "Do not confirm when applying changes in the &right sidebar"
msgstr "Bruk endringene i den høyre sidestolpen uten å be om bekreftelse"
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:154
#, kde-format
msgid "&Scan for new items at startup (makes startup slower)"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:155
#, kde-format
msgid ""
"Set this option to force digiKam to scan all collections for new items to\n"
"register new elements in database. The scan is performed in the background through\n"
"the progress manager available in the statusbar\n"
" when digiKam main interface\n"
"is loaded. If your computer is fast enough, this will have no effect on usability\n"
"of digiKam while scanning. If your collections are huge or if you use a remote database,\n"
"this can introduce low latency, and it is recommended to disable this option and to plan\n"
"a manual scan through the maintenance tool at the right moment."
"Set this option to force digiKam to clean up the core database from obsolete item entries.\n"
"Entries are only deleted if the connected image/video/audio file was already removed, i.e.\n"
"the database object wastes space.\n"
"This option does not clean up other databases as the thumbnails or recognition db.\n"
"For clean up routines for other databases, please use the maintenance."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:172
#, kde-format
msgid "Show only face tags for assigning names in people sidebar"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:177
#, kde-format
msgid "Lower bound for minimum similarity:"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:183
#, kde-format
msgid "Select here the lower bound of the minimum similarity threshold for fuzzy and duplicates searches. The default value is 40. Selecting a lower value than 40 can make the search <b>really</b> slow."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:213
#, kde-format
msgid "Use native file dialogs from system"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:214
#, fuzzy, kde-format
#| msgid "Draw frame around page titles"
msgid "Draw frames around grouped items"
msgstr "Tegn ramme rundt sidetitler"
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:221
#, kde-format
msgid "Set this option to configure how sidebar tab titles are visible. Use \"Only For Active Tab\" option if you use a small screen resolution as with a laptop computer."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:251
#, fuzzy, kde-format
#| msgctxt "You are about to translate the 'Wait' COMMAND, there are some rules on how to translate it.Please see http://edu.kde.org/kturtle/translator.php to learn how to properly translate it."
#| msgid "wait"
msgctxt "icon theme"
msgid "Adwaita"
msgstr "vent"
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:252
#, kde-format
msgctxt "icon theme"
msgid "Breeze"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:253
#, kde-format
msgctxt "icon theme"
msgid "Breeze Dark"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:254
#, kde-format
msgctxt "icon theme"
msgid "Faenza"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:255
#, kde-format
msgctxt "icon theme"
msgid "Ambiance"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:256
#, kde-format
msgctxt "icon theme"
msgid "Humanity"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:257
#, fuzzy, kde-format
#| msgid "Oxygen"
msgctxt "icon theme"
msgid "Oxygen"
msgstr "Oxygen"
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:312
#, fuzzy, kde-format
#| msgid "Use OpenPGP for the following operation"
msgid "Perform the following operations on all group members:"
msgstr "Bruk OpenPGP for følgende handling"
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:313
#, kde-format
msgid ""
"When images are grouped the following operations<br/>"
"are performed only on the displayed item (No)<br/>"
"or on all the hidden items in the group as well (Yes).<br/>"
"If Ask is selected, there will be a prompt every<br/>"
"time this operation is executed."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:321
#, kde-format
msgid "Ask"
msgstr "Spør"
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:366
#, fuzzy, kde-format
#| msgid "Grouping"
msgctxt "@title:tab"
msgid "Grouping"
msgstr "Gruppering"
#. +> trunk5
#: core/utilities/setup/setupplugins.cpp:87
#, fuzzy, kde-format
#| msgid "Batch Queue Manager"
msgctxt "@title:tab"
msgid "Batch Queue Manager"
msgstr "Købehandler"
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:112
#, fuzzy, kde-format
#| msgid "&Delay between images:"
msgid "Delay between images:"
msgstr "&Pause mellom bildene:"
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:120
#, kde-format
msgid "The delay, in seconds, between images."
msgstr "Antall sekunders pause mellom hvert bilde."
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:123
#, kde-format
msgid "Start with current image"
msgstr "Begynn med gjeldende bilde"
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:124
#, kde-format
msgid "If this option is enabled, the Slideshow will be started with the current image selected in the images list."
msgstr "Hvis dette alternativet velges begynner lysbildeframvisningen med bildet som er valgt i bildelisten."
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:127
#, kde-format
msgid "Slideshow runs in a loop"
msgstr "Lysbildeframvisningen kjøres i sløyfe."
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:128
#, kde-format
msgid "Run the slideshow in a loop."
msgstr "Lysbildeframvisningen kjøres i sløyfe."
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:130
#, fuzzy, kde-format
#| msgid "Show &progress indicator"
msgid "Show progress indicator"
msgstr "Vis &framdriftslinje"
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:131
#, kde-format
msgid "Show a progress indicator with pending items to show and time progression."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:133
#, kde-format
msgid "Show image file name"
msgstr "Vis &navnet på bildefilen"
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:134
#, kde-format
msgid "Show the image file name at the bottom of the screen."
msgstr "Skriv bildefilens navn nederst på skjermen."
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:136
#, kde-format
msgid "Show image creation date"
msgstr "Vis bildets opprettelses&datoen "
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:137
#, kde-format
msgid "Show the image creation time/date at the bottom of the screen."
msgstr "Skriv datoen da bildet ble tatt nederst på skjermen"
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:140
#, kde-format
msgid "Show the camera aperture and focal length at the bottom of the screen."
msgstr "Skriv kameraets blenderåpning og brennvidde nederst på skjermen."
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:143
#, kde-format
msgid "Show the camera exposure and sensitivity at the bottom of the screen."
msgstr "Vis lukkertid og lysfølsomhet "
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:146
#, kde-format
msgid "Show the camera make and model at the bottom of the screen."
msgstr "Vis kameramerke og modell nederst på skjermen"
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:148
#, kde-format
msgid "Show image caption"
msgstr "Vis bildetekst"
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:149
#, kde-format
msgid "Show the image caption at the bottom of the screen."
msgstr "Vis bildeteksten nederst på skjermen"
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:151
#, kde-format
msgid "Show image title"
msgstr "Vis bildetittel"
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:152
#, kde-format
msgid "Show the image title at the bottom of the screen."
msgstr "Skriv bildets tittel nederst på skjermen."
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:154
#, fuzzy, kde-format
#| msgid "Show image caption if it hasn't title"
msgid "Show image caption if it has not title"
msgstr "Vis bildeteksten hvis det ikke har tittel"
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:155
#, kde-format
msgid "Show the image caption at the bottom of the screen if no titles existed."
msgstr "Vis bildeteksten nederst på skjermen hvis det ikke fantes noen titler."
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:157
#, kde-format
msgid "Show image tags"
msgstr "Vis bildeetiketter"
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:158
#, fuzzy, kde-format
#| msgid "Show the image file name at the bottom of the screen."
msgid "Show the digiKam image tag names at the bottom of the screen."
msgstr "Skriv bildefilens navn nederst på skjermen."
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:160
#, kde-format
msgid "Show image labels"
msgstr "Vis bildeetiketter"
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:161
#, fuzzy, kde-format
#| msgid "Show the digiKam image color label, pick label, and rating at the bottom of the screen."
msgid "Show the digiKam image color label and pick label at the bottom of the screen."
msgstr "Vis digiKams bildefarge-merkelapp, plukkmerkelapp og karakter nederst på skjermen."
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:163
#, fuzzy, kde-format
#| msgid "Show image caption"
msgid "Show image rating"
msgstr "Vis bildetekst"
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:164
#, fuzzy, kde-format
#| msgid "Show the image caption at the bottom of the screen."
msgid "Show the digiKam image rating at the bottom of the screen."
msgstr "Vis bildeteksten nederst på skjermen"
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:166
#, fuzzy, kde-format
#| msgid "Caption:"
msgid "Caption font:"
msgstr "Tekst:"
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:167
#, fuzzy, kde-format
#| msgid "Select here the font used to display text in Tree Views."
msgid "Select here the font used to display text in the slideshow."
msgstr "Velg skrifttype for trevisning."
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:170
#, kde-format
msgid "Screen placement:"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:172
#, kde-format
msgid "In case of multi-screen computer, select here the monitor to slide contents."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:175
#, fuzzy, kde-format
msgctxt "@label:listbox The current screen, for the presentation mode"
msgid "Current Screen"
msgstr "Gjeldende skjerm"
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:176
#, fuzzy, kde-format
msgctxt "@label:listbox The default screen for the presentation mode"
msgid "Default Screen"
msgstr "Standardskjerm"
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:181
#, fuzzy, kde-format
msgctxt "@label:listbox %1 is the screen number (0, 1, ...)"
msgid "Screen %1"
msgstr "Skjerm %1"
#. +> trunk5
#: core/utilities/setup/setuptemplate.cpp:92
#, kde-format
msgid "Template Title:"
msgstr "Malens tittel:"
#. +> trunk5
#: core/utilities/setup/setuptemplate.cpp:95
#, kde-format
msgid "Enter the metadata template title here."
msgstr "Skriv inn metadatamalens tittel her."
#. +> trunk5
#: core/utilities/setup/setuptemplate.cpp:96
#, kde-format
msgid "<p>Enter the metadata template title here. This title will be used to identify a template in your collection.</p>"
msgstr "<p>Legg inn metadatamalen her. Titttelen skal brukes for å identifisere malen i samlingen din</p>"
#. +> trunk5
#: core/utilities/setup/setuptemplate.cpp:106
#, kde-format
msgid "<b>Note: These information are used to set <b><a href='http://en.wikipedia.org/wiki/Extensible_Metadata_Platform'>XMP</a></b> and <b><a href='http://en.wikipedia.org/wiki/IPTC'>IPTC</a></b> tag contents. There is no limitation with XMP, but note that IPTC text tags only support the printable <b><a href='http://en.wikipedia.org/wiki/Ascii'>ASCII</a></b> character set, and tag sizes are limited. Use contextual help for details.</b>"
msgstr "<b>Merk: Disse opplysningene brukes til å fylle innholdet i<b><a href='http://en.wikipedia.org/wiki/Extensible_Metadata_Platform'>XMP</a></b> og <b><a href='http://no.wikipedia.org/wiki/International_Press_Telecommunications_Council'>IPTC</a></b> etiketter. Det er ingen begrensninger for XMP, vær oppmerksom på at IPTC kun støtter<b><a href='http://en.wikipedia.org/wiki/Ascii'>ASCII</a></b> tegnsett, og at etikettlengden er begrenset. Bruk menyhjelpen for ytterligere informasjon.</b>"
#. +> trunk5
#: core/utilities/setup/setuptemplate.cpp:127
#, kde-format
msgid "&Replace..."
msgstr "&Erstatt …"
#. +> trunk5
#: core/utilities/setup/setuptemplate.cpp:244
#: core/utilities/setup/setuptemplate.cpp:273
#, kde-format
msgid "Cannot register new metadata template without title."
msgstr "Ny metadatamal kan ikke registreres uten tittel."
#. +> trunk5
#: core/utilities/setup/setuptemplate.cpp:250
#, kde-format
msgid "A metadata template named '%1' already exists."
msgstr "Det finnes allerede en metadatamal som heter «%1»"
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:195
#, kde-format
msgid "Tool-Tips Font:"
msgstr "Skrifttype for hjelpebobler"
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:196
#, kde-format
msgid "Select here the font used to display text in tool-tips."
msgstr "Denne skrifta brukes til å vise hjelpebobler"
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:204
#, kde-format
msgid "Show icon-view and thumb-bar items' tool-tips"
msgstr "Vis hjelpebobler om elementer på miniatyrlinja"
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:205
#, kde-format
msgid "Set this option to display image information when the mouse hovers over an icon-view or thumb-bar item."
msgstr "Kryss av her for å vise bildeinformasjon når markøren dras over elementet på miniatyrlinja."
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:208
#, kde-format
msgid "File/Item Information"
msgstr "Fil-/elementinformasjon"
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:211
#, kde-format
msgid "File name"
msgstr "Filnavn"
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:214
#, kde-format
msgid "File date"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:217
#, kde-format
msgid "File size"
msgstr "Filstørrelse"
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:220
#, fuzzy, kde-format
#| msgid "&Image type:"
msgid "Image type"
msgstr "&Bildetype:"
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:223
#, fuzzy, kde-format
#| msgid "Image dimension"
msgid "Image dimensions"
msgstr "Bildemålene"
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:226
#, fuzzy, kde-format
#| msgid "Ignore aspect ratio"
msgid "Image aspect ratio"
msgstr "Ignorer høyre/bredde-forhold"
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:227
#, kde-format
msgid "Set this option to display the image aspect ratio."
msgstr "Kryss av her for å vise bildets høyde/bredde-forhold"
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:243
#: core/utilities/setup/setuptooltip.cpp:423
#, fuzzy, kde-format
#| msgid "Show camera make and model"
msgid "Camera make and model"
msgstr "Vis kameramerke og -modell"
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:251
#, kde-format
msgid "Camera date"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:254
#: core/utilities/setup/setuptooltip.cpp:431
#, fuzzy, kde-format
#| msgid "Show camera aperture and focal length"
msgid "Camera aperture and focal length"
msgstr "Vis kameraets blenderåpning og brennvidde"
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:258
#: core/utilities/setup/setuptooltip.cpp:435
#, fuzzy, kde-format
#| msgid "Show camera exposure and sensitivity"
msgid "Camera exposure and sensitivity"
msgstr "Vis lukkertid og lysfølsomhet"
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:262
#, fuzzy, kde-format
#| msgid "Show camera mode and program"
msgid "Camera mode and program"
msgstr "Vis kameramodus og -program"
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:266
#: core/utilities/setup/setuptooltip.cpp:439
#, fuzzy, kde-format
#| msgid "Show camera flash settings"
msgid "Camera flash settings"
msgstr "Vis blitsinnstillingen"
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:270
#: core/utilities/setup/setuptooltip.cpp:443
#, fuzzy, kde-format
#| msgid "Show camera white balance settings"
msgid "Camera white balance settings"
msgstr "Vis innstilling for hvitbalanse,"
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:287
#, kde-format
msgid "digiKam Information"
msgstr "digiKam-informasjon"
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:290
#: core/utilities/setup/setuptooltip.cpp:363
#, fuzzy, kde-format
#| msgid "Album &name:"
msgid "Album name"
msgstr "Album&navn:"
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:291
#: core/utilities/setup/setuptooltip.cpp:364
#, kde-format
msgid "Set this option to display the album name."
msgstr "Kryss av her for å vise albumnavnet"
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:293
#, kde-format
msgid "Image title"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:294
#, fuzzy, kde-format
#| msgid "Set this option to display the image type."
msgid "Set this option to display the image title."
msgstr "Kryss av her for å vise hvilken type bildet er."
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:296
#, fuzzy, kde-format
#| msgid "Image Location:"
msgid "Image caption"
msgstr "Bildested:"
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:297
#, kde-format
msgid "Set this option to display the image captions."
msgstr "Kryss av her for å vise bildetekster"
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:299
#, fuzzy, kde-format
#| msgctxt "@option:check"
#| msgid "Image tags"
msgid "Image tags"
msgstr "Bildeetiketter"
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:300
#, kde-format
msgid "Set this option to display the image tags."
msgstr "Kryss av her for å vise bildeetiketter"
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:302
#, kde-format
msgid "Image labels"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:303
#, kde-format
msgid "Set this option to display the image pick, color, rating labels."
msgstr "Kryss av her for å vise bildenes karakterer, plukkmerkelapper og fargemerkelapper."
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:315
#, fuzzy, kde-format
#| msgid "Video Information"
msgid "Audio/Video Information"
msgstr "Videoinformasjon"
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:318
#, fuzzy, kde-format
#| msgid "Show Video Aspect Ratio"
msgid "Video Aspect Ratio"
msgstr "Vis forholdet mellom høyde og bredde for videoen"
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:319
#: core/utilities/setup/setuptooltip.cpp:334
#, fuzzy, kde-format
#| msgid "Set this option to display the Aspect Ratio of the Video"
msgid "Set this option to display the Aspect Ratio of the Video."
msgstr "Kryss av her for å vise videoens størrelsesforhold"
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:322
#, fuzzy, kde-format
#| msgid "Set this option to display the Audio Bit Rate of the Video"
msgid "Set this option to display the Audio Bit Rate of the Video."
msgstr "Kryss av her for å vise videoens lyd-bitrate"
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:325
#, fuzzy, kde-format
#| msgid "Set this option to display the Audio Channel Type of the Video"
msgid "Set this option to display the Audio Channel Type of the Video."
msgstr "Kryss av her for å vise videoens lydkanal-type"
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:328
#, fuzzy, kde-format
#| msgid "Set this option to display the Codec of the Video"
msgid "Set this option to display the Audio Codec of the Video."
msgstr "Kryss av her for å vise videoens kodek"
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:330
#, fuzzy, kde-format
#| msgid "Show Video Duration"
msgid "Video Duration"
msgstr "Vis varighet for videoen"
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:331
#, fuzzy, kde-format
#| msgid "Set this option to display the Duration of the Video"
msgid "Set this option to display the Duration of the Video."
msgstr "Kryss av her for å vise videoens varighet"
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:333
#, fuzzy, kde-format
#| msgid "Show Video Frame Rate"
msgid "Video Frame Rate"
msgstr "Vis videoens rammerate"
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:337
#, fuzzy, kde-format
#| msgid "Set this option to display the Codec of the Video"
msgid "Set this option to display the Codec of the Video."
msgstr "Kryss av her for å vise videoens kodek"
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:357
#, kde-format
msgid "Show album items' tool-tips"
msgstr "Vis hjelpebobler for albumelementer."
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:358
#, kde-format
msgid "Album Information"
msgstr "Albuminformasjon"
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:360
#: core/utilities/setup/setuptooltip.cpp:401
#, kde-format
msgid "Set this option to display album information when the mouse hovers over a folder-view item."
msgstr "Velg dette elementet hvis du vil se albuminformasjon når du drar musepekeren over et mappeelement."
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:366
#, fuzzy, kde-format
#| msgid "Album &date:"
msgid "Album date"
msgstr "Album&dato:"
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:367
#, kde-format
msgid "Set this option to display the album date."
msgstr "Kryss av her for å vise albumdatoen"
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:369
#, fuzzy, kde-format
#| msgid "Show album collection"
msgid "Album collection"
msgstr "Vis albumsamlingen"
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:370
#, kde-format
msgid "Set this option to display the album collection."
msgstr "Kryss av her for å vise albumsamlingen"
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:372
#, fuzzy, kde-format
#| msgid "Album Category"
msgid "Album category"
msgstr "Albumkategori"
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:373
#, kde-format
msgid "Set this option to display the album category."
msgstr "Kryss av her for å vise albumkategori"
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:375
#, fuzzy, kde-format
#| msgctxt "Track field name"
#| msgid "Album Gain"
msgid "Album caption"
msgstr "Forsterking for album"
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:376
#, kde-format
msgid "Set this option to display the album caption."
msgstr "Kryss av her for å vise albumtekster"
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:378
#, fuzzy, kde-format
#| msgid "Album View"
msgid "Album preview"
msgstr "Albumvisning"
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:379
#, fuzzy, kde-format
#| msgid "Set this option to display the album name."
msgid "Set this option to display the album preview."
msgstr "Kryss av her for å vise albumnavnet"
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:398
#, kde-format
msgid "Show import items' tool-tips"
msgstr "Vis hjelpebobler for importerte elementer"
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:399
#, kde-format
msgid "Import Information"
msgstr "Importinformasjon"
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:404
#, fuzzy, kde-format
#| msgid "Item name:"
msgid "Item name"
msgstr "Elementnavn:"
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:405
#, kde-format
msgid "Set this option to display the item name."
msgstr "Kryss av her for å vise elementnavnet."
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:407
#, kde-format
msgid "Item date"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:408
#, kde-format
msgid "Set this option to display the item date."
msgstr "Kryss av her for å vise elementdatoen."
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:410
#, kde-format
msgid "Item size"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:411
#, kde-format
msgid "Set this option to display the item size."
msgstr "Kryss av her for å vise elementets størrelse."
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:413
#, kde-format
msgid "Item type"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:414
#, kde-format
msgid "Set this option to display the item type."
msgstr "Kryss av her for å vise hvilken type elementet er."
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:416
#, fuzzy, kde-format
#| msgid "Show item dimensions"
msgid "Item dimensions"
msgstr "Vis målene for elementet"
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:417
#, kde-format
msgid "Set this option to display the item dimensions."
msgstr "Kryss av her for å vise elementets mål."
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:420
#, kde-format
msgid "Note: these settings require \"Use File Metadata\" option from Camera Setup Behavior page."
msgstr "Merk: Disse innstillingene forutsetter at «Bruk fil-metadata» eer slått på på oppsettssida for kamera-oppførsel."
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:470
#, kde-format
msgid "Icon Items"
msgstr "Ikonelementer"
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:471
#, kde-format
msgid "Album Items"
msgstr "Albumelementer"
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:472
#, kde-format
msgid "Import Items"
msgstr "Importer elementer"
#. +> trunk5
#: core/utilities/slideshow/slideend.cpp:77
#, kde-format
msgid ""
"Slideshow Completed.\n"
"Click To Exit\n"
"or press ESC..."
msgstr ""
#. +> trunk5
#: core/utilities/slideshow/slideerror.cpp:88
#, fuzzy, kde-format
#| msgid "An error has occurred in %1"
msgid ""
"An error has occurred to show item\n"
"%1"
msgstr "Det oppsto en feil i %1"
#. +> trunk5
#: core/utilities/slideshow/slidehelp.cpp:43
#, fuzzy, kde-format
#| msgid "Slideshow"
msgid "Slideshow Usage"
msgstr "Lysbildeframvisning"
#. +> trunk5
#: core/utilities/slideshow/slidehelp.cpp:51
#, kde-format
msgid ""
"<qt>"
"<table>"
"<tr>"
"<td colspan=\"2\"><nobr>"
"<center><b>"
"<h1>Item Access</h1>"
"</b></center>"
"</nobr></td>"
"</tr>"
"<tr>"
"<td>Previous Item:</td>"
"<td><i>Up</i> key</td>"
"</tr>"
"<tr>"
"<td></td>"
"<td><i>PgUp</i> key</td>"
"</tr>"
"<tr>"
"<td></td>"
"<td><i>Left</i> key</td>"
"</tr>"
"<tr>"
"<td></td>"
"<td>Mouse wheel up</td>"
"<tr>"
"<td></td>"
"<td>Left mouse button</td>"
"</tr>"
"<tr>"
"<td>Next Item:</td>"
"<td><i>Down</i> key</td>"
"</tr>"
"<tr>"
"<td></td>"
"<td><i>PgDown</i> key</td>"
"</tr>"
"<tr>"
"<td></td>"
"<td><i>Right</i> key</td>"
"</tr>"
"<tr>"
"<td></td>"
"<td>Mouse wheel down</td>"
"</tr>"
"<tr>"
"<td></td>"
"<td>Right mouse button</td>"
"</tr>"
"<tr>"
"<td>Pause/Start:</td>"
"<td><i>Space</i> key</td>"
"</tr>"
"<tr>"
"<td>Hide/Show Properties:</td>"
"<td><i>F4</i> key</td>"
"</tr>"
"<tr>"
"<td>Quit:</td>"
"<td><i>Esc</i> key</td>"
"</tr>"
"<tr>"
"<td colspan=\"2\"><nobr>"
"<center><b>"
"<h1>Item Properties</h1>"
"</b></center>"
"</nobr></td>"
"</tr>"
"<tr>"
"<td>Change Tags:</td>"
"<td>Use Tags keyboard shortcuts</td>"
"</tr>"
"<tr>"
"<td>Change Rating:</td>"
"<td>Use Rating keyboard shortcuts</td>"
"</tr>"
"<tr>"
"<td>Change Color Label:</td>"
"<td>Use Color label keyboard shortcuts</td>"
"</tr>"
"<tr>"
"<td>Change Pick Label:</td>"
"<td>Use Pick label keyboard shortcuts</td>"
"</tr>"
"<tr>"
"<td colspan=\"2\"><nobr>"
"<center><b>"
"<h1>Others</h1>"
"</b></center>"
"</nobr></td>"
"</tr>"
"<tr>"
"<td>Show this help:</td>"
"<td><i>F1</i> key</td>"
"</tr>"
"</table>"
"</qt>"
msgstr ""
#. +> trunk5
#: core/utilities/slideshow/slideshow.cpp:580
#, kde-format
msgctxt "Reason for inhibiting the screensaver activation, when the presentation mode is active"
msgid "Giving a slideshow"
msgstr ""
#. +> trunk5
#: core/utilities/slideshow/slidetoolbar.cpp:105
#, fuzzy, kde-format
msgid "Switch Screen"
msgstr "Bytt skjerm"
#. +> trunk5
#: core/utilities/slideshow/slidetoolbar.cpp:118
#, fuzzy, kde-format
msgctxt "%1 is the screen number (0, 1, ...)"
msgid "Screen %1"
msgstr "Skjerm %1"
#~ msgid "Reading database..."
#~ msgstr "Leser database …"
#~ msgid "If you press this button, all curves' values from the currently selected channel will be reset to the default values."
#~ msgstr "Trykk på denne knappen for å sette kurveverdiene for den gjeldende kanalen tilbake til standardverdier."
#~ msgid "Set Point 1"
#~ msgstr "Bestem punkt 1"
#~ msgid "Set Point 2"
#~ msgstr "Bestem punkt 2"
#~ msgid "Auto Adjust"
#~ msgstr "Automatisk justering"
#~ msgid "Automatically correct image colors."
#~ msgstr "Rett automatisk farger i bildet."
#~ msgid "Fix Brightness/Contrast/Gamma."
#~ msgstr "Korriger lysstyrke/kontrast/gamma."
#~ msgid "B&W Convert"
#~ msgstr "Monokromkonvertering"
#~ msgid "Fix Hue/Saturation/Lightness."
#~ msgstr "Korriger nyanse/metting/lyshet."
#~ msgid "ICC Convert"
#~ msgstr "ICC-omforming"
#~ msgid "Blur images"
#~ msgstr "Slør bilder"
#~ msgid "Restore photographs based on Greystoration."
#~ msgstr "Restaurer bilder, basert på Greystoration."
#~ msgid "Sharpen images"
#~ msgstr "Gjør bilder skarpere"
#~ msgid "Apply template metadata"
#~ msgstr "Bruk metadata fra mal"
#~ msgid "Rotate images."
#~ msgstr "Roter bilder"
#~ msgctxt "@info:status"
#~ msgid "Any albums"
#~ msgstr "Ethvert album"
#~ msgctxt "@info:status"
#~ msgid "Any tags"
#~ msgstr "Enhver etikett"
#~ msgid "Aperture: %1"
#~ msgstr "Blender: %1"
#~ msgid "Focal Length: %1"
#~ msgstr "Brennvidde: %1"
#~ msgid "Crop Factor: %1"
#~ msgstr "Beskjæringsfaktor: %1"
#~ msgid "Exposure: %1"
#~ msgstr "Eksponering: %1"
#~ msgid "Saturation: %1"
#~ msgstr "Metning: %1"
#~ msgid "Contrast: %1"
#~ msgstr "Kontrast: %1"
#~ msgid "Raster Files"
#~ msgstr "Rasterfiler"
#~ msgid "Model/View Port of Showfoto Thumbbar"
#~ msgstr "Model/view-port av minibilde-linja Showfotp"
#~ msgid "My Networks and Friends"
#~ msgstr "Mine nettverk og venner"
#~ msgid "Upgrading to OAuth..."
#~ msgstr "Oppgraderer til OAuth …"
#~ msgid "Facebook Application Authorization"
#~ msgstr "Autorisering for Facebook-applikasjon"
#~ msgid "Please follow the instructions in the browser window. When done, copy the Internet address from your browser into the textbox below and press \"OK\"."
#~ msgstr "Følg anvisningene i nettleservinduet. Når du er ferdig, så kopier internett-adressen fra nettleseren inn i tekstboksen nedenfor og trykk på «OK»."
#~ msgid "Canceled by user."
#~ msgstr "Avbrutt av bruker."
#~ msgid "Google Drive Authorization"
#~ msgstr "Google Drive Autorisasjon"
#~ msgid "Please follow the instructions in the browser. After logging in and authorizing the application, copy the code from the browser, paste it in the textbox below, and click OK."
#~ msgstr "Følg instruksjonene i nettleseren. Når du har logget inn og autorisert programmet, kopier koden fra nettleseren, lim den inn i skrivefeltet under og trykk OK."
#~ msgid "The textbox is empty, please enter the code from the browser in the textbox. To complete the authentication click \"Change Account\", or \"Start Upload\" to authenticate again."
#~ msgstr "Tekstboksen er tom, skriv inn koden fra nettleseren i tekstboksen. Fullfør autentiseringn ved å trykke «Endre konto», eller «Begynn opplasting» for å autentisere igjen."
#~ msgctxt "%1 is the error string, %2 is the error code"
#~ "<para>If this option is turned on, it will try to shift image channels slightly and evaluate Chromatic Aberration change. Note that if you shot blue-red pattern, the method may fail. In this case, disable this option and tune manually color factors.</para>"
#~ msgstr ""
#~ "<title>Automatisk korreksjon for kromatisk avvik</title>"
#~ "<para>Hvis dette er slått på vil systemet forsøke å forskyve bildekanalene litt og beregne endring i kromatisk avvik. Merk at denne metoden kan svikte hvis du fotograferte et blått-rødt mønster. I så fall slås dette valget av, og still inn fargefaktorer manuelt.</para>"
#~ msgctxt "@label:slider"
#~ msgid "Red-Green:"
#~ msgstr "Rød-grønn:"
#~ msgctxt "@info:whatsthis"
#~ msgid ""
#~ "<title>Red-Green multiplier</title>"
#~ "<para>Set here the amount of correction on red-green axis</para>"
#~ msgstr ""
#~ "<title>Rød-grønn faktor</title>"
#~ "<para>Oppgi her korreksjonsfaktor for rød-grønn akse</para>"
#~ msgctxt "@label:slider"
#~ msgid "Blue-Yellow:"
#~ msgstr "Blå-gul:"
#~ msgctxt "@info:whatsthis"
#~ msgid ""
#~ "<title>Blue-Yellow multiplier</title>"
#~ "<para>Set here the amount of correction on blue-yellow axis</para>"
#~ msgstr ""
#~ "<title>Blå-gul faktor</title>"
#~ "<para>Oppgi her korreksjonsfaktor for blå-gul akse</para>"
#~ msgctxt "@label"
#~ msgid "Luminance:"
#~ msgstr "Luminans:"
#~ msgctxt "@info:whatsthis"
#~ msgid ""
#~ "<title>Luminance</title>"
#~ "<para>Amount of Luminance impulse noise reduction.</para>"
#~ msgstr ""
#~ "<title>Luminans</title>"
#~ "<para>Mengde impuls-støyreduksjon i luminans.</para>"
#~ msgctxt "@label"
#~ msgid "Chrominance:"
#~ msgstr "Krominans:"
#~ msgctxt "@info:whatsthis"
#~ msgid ""
#~ "<title>Chrominance</title>"
#~ "<para>Amount of Chrominance impulse noise reduction.</para>"
#~ msgstr ""
#~ "<title>Krominans</title>"
#~ "<para>Mengde impuls--støyreduksjon i krominans.</para>"
"<para>If <emphasis>Use Exif description</emphasis> is enabled under <interface>Settings|Configure KPhotoAlbum...|General</interface>, a description embedded in the image Exif information is imported to this field if available.</para>"
"<para>In KPhotoAlbum, images can either have an exact date and time, or a <emphasis>fuzzy</emphasis> date which happened any time during a specified time interval. Images produced by digital cameras do normally have an exact date.</para>"
"<para>If you don't know exactly when a photo was taken (e.g. if the photo comes from an analog camera), then you should set <interface>Use Fuzzy Date</interface>.</para>"
msgstr ""
"<para>I KPhotoAlbum kan bilder ha enten en nøyaktig dato og klokkeslett, eller en <emphasis>uskarp</emphasis> dato, dvs en dato som faller et sted i et tidsintervall. Bilder tatt med digitalkameraer har som regel en nøyaktig dato.</para>"
" "
"<para>Hvis du ikke vet akkurat når et bilde ble tatt (f.eks. hvis bildet kommer fra et analog-kamera), så bør du slå på <interface>Bruk uskarp dato</interface>.</para>"
#. +> trunk5
#: AnnotationDialog/Dialog.cpp:354
#, kde-format
msgid "Minimum megapixels:"
msgstr "Minimum megapiksler:"
#. +> trunk5
#: AnnotationDialog/Dialog.cpp:364
#, fuzzy, kde-format
#| msgid "Minimum megapixels:"
msgid "Maximum megapixels:"
msgstr "Minimum megapiksler:"
#. +> trunk5
#: AnnotationDialog/Dialog.cpp:377
#, kde-format
msgid "Rating:"
msgstr "Vurdering:"
#. +> trunk5
#: AnnotationDialog/Dialog.cpp:384
#, kde-format
msgid "Rating search mode:"
msgstr "Søkemodus for vurderinger:"
#. +> trunk5
#: AnnotationDialog/Dialog.cpp:388
#, kde-format
msgid "=="
msgstr "=="
#. +> trunk5
#: AnnotationDialog/Dialog.cpp:388
#, fuzzy, kde-format
#| msgid ">"
msgid ">="
msgstr ">"
#. +> trunk5
#: AnnotationDialog/Dialog.cpp:388
#, fuzzy, kde-format
#| msgid "<=>"
msgid "<="
msgstr "<=>"
#. +> trunk5
#: AnnotationDialog/Dialog.cpp:388
#, kde-format
msgid "!="
msgstr "!="
#. +> trunk5
#: AnnotationDialog/Dialog.cpp:396
#, kde-format
msgid "File Name Pattern: "
msgstr "Mønster for filnavn: "
#. +> trunk5
#: AnnotationDialog/Dialog.cpp:399
#, kde-format
msgid "File Name Pattern"
msgstr "Mønster for filnavn"
#. +> trunk5
#: AnnotationDialog/Dialog.cpp:404
#, kde-format
msgid "Search only for RAW files"
msgstr "Søk bare etter RAW-filer"
#. +> trunk5
#: AnnotationDialog/Dialog.cpp:593
#, fuzzy, kde-format
#| msgid "KPhotoAlbum Annotations (%1/%2)"
msgctxt "@title:window image %1 of %2 images"
msgid "Annotations (%1/%2)"
msgstr "KPhotoAlbum merknader (%1/%2)"
#. +> trunk5
#: AnnotationDialog/Dialog.cpp:812
#, kde-format
msgctxt "@title:window title of the 'find images' window"
"File %1 could not be opened because of the following error: %2"
msgstr ""
"<p>Klarte ikke å lagre vindusutformingen.</p>"
" Fila %1 kunne ikke åpnes på grunn av denne feilen: %2"
#. +> trunk5
#: AnnotationDialog/Dialog.cpp:954
#, kde-format
msgid ""
"<p>Could not save the window layout.</p>"
"File %1 could not be written because of the following error: %2"
msgstr ""
"<p>Klarte ikke å lagre vindusutformingen.</p>"
" Fila %1 kunne ikke skrives på grunn av denne feilen: %2"
#. +> trunk5
#: AnnotationDialog/Dialog.cpp:1022
#, kde-format
msgid "<p>Some changes are made to annotations. Do you really want to cancel all recent changes for each affected file?</p>"
msgstr "<p>Det er gjort noen endringer i merknadene. Er du sikker på at du vil slette alle nylige endringer for hver fil dette gjelder?</p>"
#. +> trunk5
#: AnnotationDialog/Dialog.cpp:1122
#, kde-format
msgid ""
"<p>You have just opened the advanced search dialog; to get the most out of it, it is suggested that you read the section in the manual on <a href=\"help:/kphotoalbum/sect-general-image-searches.html\">advanced searching</a>.</p>"
"<p>This dialog is also used for typing in information about images; you can find extra tips on its usage by reading about <a href=\"help:/kphotoalbum/chp-typingIn.html\">typing in</a>.</p>"
msgstr ""
"<p>Du har nettopp åpnet dialogen for avansert søk; det foreslås at du leser avsnittet i håndboka om <a href=\"help:/kphotoalbum/sect-general-image-searches.html\">avansert søk</a> for å få best utbytte av det.</p>"
" "
"<p>Denne dialogen brukes også for å taste inn informasjon om bilder; du kan finne ekstra tips om hvordan dette brukes ved å lese om <a href=\"help:/kphotoalbum/chp-typingIn.html\">inntasting</a>.</p>"
#. +> trunk5
#: AnnotationDialog/Dialog.cpp:1130
#, kde-format
msgid ""
"<p>You have just opened one of the most important windows in KPhotoAlbum; it contains lots of functionality which has been optimized for fast usage.</p>"
"<p>It is strongly recommended that you take 5 minutes to read the <a href=\"help:/kphotoalbum/chp-typingIn.html\">documentation for this dialog</a></p>"
msgstr ""
"<p>Du har nettopp åpnet et av de viktigste vinduene i KPhotoAlbum, det inneholder en mengde funksjoner som er optimert for raskt bruk. </p>"
" "
"<p>Det anbefales sterkt at du bruker 5 minutter for å lese <a href=\"help:/kphotoalbum/chp-typingIn.html\">dokumentasjonen for denne dialogen</a></p>"
#. +> trunk5
#: AnnotationDialog/Dialog.cpp:1259
#, kde-format
msgid "Sort Most Recently Used"
msgstr "Sorter mest nylig brukt"
#. +> trunk5
#: AnnotationDialog/Dialog.cpp:1262
#, kde-format
msgid "Toggle Sorting"
msgstr "Slå sortering av/på"
#. +> trunk5
#: AnnotationDialog/Dialog.cpp:1267
#, kde-format
msgid "Toggle Showing Selected Items Only"
msgstr "Slå av/på visning av bare valgte elementer"
"<p>The category \"%1\" the tag \"%2\" belongs to is not positionable.</p>"
"<p>If you want to use this tag, change this in the settings dialog. If this tag shouldn't be in the recognition database anymore, it can be deleted in the settings.</p>"
msgstr ""
#. +> trunk5
#: AnnotationDialog/ImagePreview.cpp:544
#, kde-format
msgid ""
"<p><b>Can't associate tag \"%2\"</b></p>"
"<p>The category \"%1\" the tag \"%2\" belongs to does not exist.</p>"
"<p>If you want to use this tag, add this category and mark it as positionable. If this tag shouldn't be in the recognition database anymore, it can be deleted in the settings dialog.</p>"
msgstr ""
#. +> trunk5
#: AnnotationDialog/ImagePreviewWidget.cpp:54
#, kde-format
msgid "Annotate previous image"
msgstr "Skriv merknad til forrige bilde"
#. +> trunk5
#: AnnotationDialog/ImagePreviewWidget.cpp:60
#, kde-format
msgid "Annotate next image"
msgstr "Skriv merknad til neste bilde"
#. +> trunk5
#: AnnotationDialog/ImagePreviewWidget.cpp:67
#, fuzzy, kde-format
#| msgid "Toggle fullscreen preview"
msgid "Toggle full-screen preview (CTRL+Space)"
msgstr "Slå av/på forhåndsvisning i fullskjerm"
#. +> trunk5
#: AnnotationDialog/ImagePreviewWidget.cpp:87
#, kde-format
msgid "Copy tags from previously tagged image"
msgstr "Kopier merker fra tidligere merket bilde"
#. +> trunk5
#: AnnotationDialog/ImagePreviewWidget.cpp:88
#, kde-format
msgctxt "@info:whatsthis"
msgid "<para>Set the same tags on this image than on the previous one. The image date, label, rating, and description are left unchanged.</para>"
msgstr ""
#. +> trunk5
#: AnnotationDialog/ImagePreviewWidget.cpp:102
#, kde-format
msgid "Delete image"
msgstr "Slett bilde"
#. +> trunk5
#: AnnotationDialog/ImagePreviewWidget.cpp:117
#, kde-format
msgid "Category for new areas:"
msgstr ""
#. +> trunk5
#: AnnotationDialog/ImagePreviewWidget.cpp:312
#, kde-format
msgctxt "@info:tooltip"
msgid "Hide or show areas on the image"
msgstr ""
#. +> trunk5
#: AnnotationDialog/ImagePreviewWidget.cpp:317
#, kde-format
msgctxt "@info:tooltip"
msgid "If you enable <emphasis>positionable tags</emphasis> for at least one category in <interface>Settings|Configure KPhotoAlbum...|Categories</interface>, you can associate specific image areas with tags."
msgstr ""
#. +> trunk5
#: AnnotationDialog/ImagePreviewWidget.cpp:322
#, kde-format
msgctxt "@info:tooltip"
msgid "Areas on an image can only be shown in single-image annotation mode."
msgid "The tag you entered is the tag that is set automatically for newly found, untagged images (cf. <interface>Settings|Configure KPhotoAlbum...|Categories|Untagged Images</interface>). It will not show up here as long as it is selected for this purpose."
msgstr ""
#. +> trunk5
#: AnnotationDialog/ListSelect.cpp:327
#, kde-format
msgid "No Item Selected"
msgstr "Ingen elementer valgt"
#. +> trunk5
#: AnnotationDialog/ListSelect.cpp:331
#, kde-format
msgid "<b>%1</b>"
msgstr "<b>%1</b>"
#. +> trunk5
#: AnnotationDialog/ListSelect.cpp:338
#, kde-format
msgid "Rename..."
msgstr "Endre navn …"
#. +> trunk5
#: AnnotationDialog/ListSelect.cpp:340
#, fuzzy, kde-format
#| msgctxt "Gui::TagListWidget|"
#| msgid "<b>Tags:</b>"
msgid "<b>Tag Groups</b>"
msgstr "<b>Tagger:</b>"
#. +> trunk5
#: AnnotationDialog/ListSelect.cpp:348
#, kde-format
msgid "Tag groups"
msgstr ""
#. +> trunk5
#: AnnotationDialog/ListSelect.cpp:365
#, kde-format
msgid "Add this tag to a new tag group..."
msgstr ""
#. +> trunk5
#: AnnotationDialog/ListSelect.cpp:368
#, kde-format
msgid "Make this tag a tag group and add a tag..."
msgstr ""
#. +> trunk5
#: AnnotationDialog/ListSelect.cpp:374
#, fuzzy, kde-format
#| msgid "Remove from Group"
msgid "Remove from tag group %1"
msgstr "Fjern fra gruppe"
#. +> trunk5
#: AnnotationDialog/ListSelect.cpp:377
#, kde-format
msgid "<b>Sorting</b>"
msgstr "<b>Sortering</b>"
#. +> trunk5
#: AnnotationDialog/ListSelect.cpp:383
#, kde-format
msgid "Usage"
msgstr "Bruk"
#. +> trunk5
#: AnnotationDialog/ListSelect.cpp:384
#, kde-format
msgid "Alphabetical (Flat)"
msgstr "Alfabetisk (Flatt)"
#. +> trunk5
#: AnnotationDialog/ListSelect.cpp:385
#, kde-format
msgid "Alphabetical (Tree)"
msgstr "Alfabetisk (Tre)"
#. +> trunk5
#: AnnotationDialog/ListSelect.cpp:405
#, kde-format
msgid ""
"<p>Do you really want to delete \"%1\"?<br/>"
"Deleting the item will remove any information about it from any image containing the item.</p>"
msgstr ""
"<p>Er du sikker på at du vil slette «%1»?<br/>"
" Om dette slettes blir all informasjon om det slettet fra alle bilder som inneholder elementet.</p>"
msgid "Searching for videos without video thumbnails"
msgstr "Søker etter videoer uten video-minibilder"
#. +> trunk5
#: BackgroundTaskManager/JobInfo.cpp:69
#, kde-format
msgid "Not Started"
msgstr "Ikke startet"
#. +> trunk5
#: BackgroundTaskManager/JobModel.cpp:106
#, kde-format
msgctxt "@title:column Background job id"
msgid "ID"
msgstr "ID"
#. +> trunk5
#: BackgroundTaskManager/JobModel.cpp:108
#, kde-format
msgctxt "@title:column Background job title"
msgid "Title"
msgstr "Tittel"
#. +> trunk5
#: BackgroundTaskManager/JobModel.cpp:110
#, kde-format
msgctxt "@title:column Additional information on background job"
msgid "Details"
msgstr "Detaljer"
#. +> trunk5
#: BackgroundTaskManager/JobModel.cpp:112
#, kde-format
msgctxt "@title:column Elapsed time"
msgid "Elapsed"
msgstr "Medgått tid"
#. +> trunk5
#: BackgroundTaskManager/JobViewer.cpp:35
#, fuzzy, kde-format
#| msgid "Background Job Viewer"
msgctxt "@title:window"
msgid "Background Job Viewer"
msgstr "Viser bakgrunnsjobber"
#. +> trunk5
#: BackgroundTaskManager/JobViewer.cpp:44
#: BackgroundTaskManager/JobViewer.cpp:79
#, kde-format
msgid "Pause"
msgstr "Pause"
#. +> trunk5
#: BackgroundTaskManager/JobViewer.cpp:79
#, kde-format
msgid "Continue"
msgstr "Fortsett"
#. +> trunk5
#: BackgroundTaskManager/StatusIndicator.cpp:92
#, kde-format
msgid ""
"<p>Active jobs: %1<br/>"
"Pending jobs: %2<hr/>"
"<br/>"
"Color codes:"
"<ul>"
"<li><b>blinking green</b>: Active background jobs</li>"
"<li><b>gray</b>: No active jobs</li>"
"<li><b>solid yellow</b>: Job queue is paused</li>"
"<li><b>blinking yellow</b>: Job queue is paused for background jobs, but is executing a foreground job (like extracting a thumbnail for a video file, which is currently shown in the thumbnail viewer)</li>"
"<li><b>blinkende gul</b>: Jobbkøen er pauset for bakgrunnsjobber, men kjører en forgrunnsjobb (som å trekke ut et minibilde for en videofil, som nå vises i minibildeviseren)</li>"
#| msgctxt "an arbitrary string surrounded by quotes"
#| msgid "\"%1\""
msgid "\"%1\""
msgstr "«%1»"
#. +> trunk5
#: CategoryListView/CheckDropItem.cpp:124
#, fuzzy, kde-format
#| msgctxt "an arbitrary string surrounded by quotes"
#| msgid "\"%1\""
msgid ", \"%1\""
msgstr "«%1»"
#. +> trunk5
#: CategoryListView/CheckDropItem.cpp:127
#, kde-format
msgid " and \"%1\""
msgstr ""
#. +> trunk5
#: CategoryListView/CheckDropItem.cpp:131
#, kde-format
msgid ""
"<p>You have just dragged an item onto another. This will make the target item a tag group and define the dragged item as a member of this group. Tag groups may be used to denote facts such as 'Las Vegas is in the USA'. In that example you would drag Las Vegas onto USA. When you have set up tag groups, you can, for instance, see all images from the USA by simply selecting that item in the Browser.</p>"
"<p>Was it really your intention to make \"%3\" a tag group and add \"%2\" as a member?</p>"
msgid_plural ""
"<p>You have just dragged some items onto one other item. This will make the target item a tag group and define the dragged items as members of this group. Tag groups may be used to denote facts such as 'Las Vegas and New York are in the USA'. In that example you would drag Las Vegas and New York onto USA. When you have set up tag groups, you can, for instance, see all images from the USA by simply selecting that item in the Browser.</p>"
"<p>Was it really your intention to make \"%3\" a tag group and add %2 as members?</p>"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5
#: CategoryListView/CheckDropItem.cpp:157
#, kde-format
msgid "Move Items"
msgstr "Flytt elementer"
#. +> trunk5
#: DateBar/DateBarWidget.cpp:87
#, kde-format
msgid "Zoom in"
msgstr ""
#. +> trunk5
#: DateBar/DateBarWidget.cpp:93
#, kde-format
msgid "Zoom out"
msgstr ""
#. +> trunk5
#: DateBar/DateBarWidget.cpp:101
#, fuzzy, kde-format
#| msgid "Clear selection"
msgctxt "The button clears the selection of a date range in the date bar."
msgid "Clear date selection"
msgstr "Tøm utvalg"
#. +> trunk5
#: DateBar/DateBarWidget.cpp:109
#, kde-kuit-format
msgctxt "@info"
msgid ""
"<title>The date bar</title>"
"<para>"
"<list>"
"<item>Scroll using the arrow buttons, the scrollwheel, or the middle mouse button.</item>"
"<item>Zoom using the +/- buttons or Ctrl + scrollwheel.</item>"
"<item>Restrict the view to a date range selection: Click/drag below the timeline.</item>"
"<item>Jump to a date by clicking on the histogram bar.</item>"
"</list>"
"</para>"
msgstr ""
#. +> trunk5
#: DateBar/DateBarWidget.cpp:602
#, kde-format
msgid "Show Ranges"
msgstr "Vis områder"
#. +> trunk5
#: DateBar/DateBarWidget.cpp:608
#, kde-format
msgid "Show Resolution Indicator"
msgstr "Vis oppløsningsindikator"
#. +> trunk5
#: DateBar/DateBarWidget.cpp:732
#, kde-format
msgctxt "@info:status images that fall in the given date range"
msgid "1 exact"
msgid_plural "%1 exact"
msgstr[0] "1 eksakt"
msgstr[1] "%1 eksakte"
#. +> trunk5
#: DateBar/DateBarWidget.cpp:733
#, kde-format
msgctxt "@info:status additional images captured in a date range that overlaps with the given date range,"
msgid " + 1 range"
msgid_plural " + %1 ranges"
msgstr[0] " +1 område"
msgstr[1] " +%1 områder"
#. +> trunk5
#: DateBar/DateBarWidget.cpp:734
#, kde-format
msgctxt "@info:status total image count"
msgid " = 1 total"
msgid_plural " = %1 total"
msgstr[0] " = 1 total"
msgstr[1] " = %1 total"
#. +> trunk5
#: DateBar/DateBarWidget.cpp:736
#, kde-format
msgctxt "@info:status image count"
msgid "%1 image/video"
msgid_plural "%1 images/videos"
msgstr[0] "%1 bilde/video"
msgstr[1] "%1 bilder/videoer"
#. +> trunk5
#: DateBar/DateBarWidget.cpp:738
#, kde-format
msgctxt "@info:status Time range vs. image count (e.g. 'Jun 2012 | 4 images/videos')."
msgid "%1 | %2"
msgstr "%1 | %2"
#. +> trunk5
#: DateBar/ViewHandler.cpp:119
#, kde-format
msgid "1 Year"
msgstr "1 år"
#. +> trunk5
#: DateBar/ViewHandler.cpp:152
#, kde-format
msgid "1 Month"
msgstr "1 måned"
#. +> trunk5
#: DateBar/ViewHandler.cpp:189
#, kde-format
msgid "1 Week"
msgstr "1 uke"
#. +> trunk5
#: DateBar/ViewHandler.cpp:216
#, kde-format
msgid "1 Day"
msgstr "1 dag"
#. +> trunk5
#: DateBar/ViewHandler.cpp:257
#, kde-format
msgid "2 Hours"
msgstr "2 timer"
#. +> trunk5
#: DateBar/ViewHandler.cpp:291
#, kde-format
msgid "10 Minutes"
msgstr "10 minutter"
#. +> trunk5
#: DateBar/ViewHandler.cpp:325
#, fuzzy, kde-format
#| msgctxt "@info"
#| msgid "1 Minute"
#| msgid_plural "%1 Minutes"
msgid "1 Minute"
msgstr "1 minutt"
#. +> trunk5
#: DateBar/ViewHandler.cpp:360
#, fuzzy, kde-format
#| msgid "30 Seconds"
msgid "10 Seconds"
msgstr "30 sekunder"
#. +> trunk5
#: DB/Category.cpp:174
#, kde-format
msgid "Unable to create directory '%1'."
msgstr "Klarte ikke å opprette mappa «%1»."
#. +> trunk5
#: DB/Category.cpp:174
#, kde-format
msgid "Unable to Create Directory"
msgstr "Klarer ikke å opprette mappe"
#. +> trunk5
#: DB/Category.cpp:182
#, kde-format
msgid "Error when saving image '%1'."
msgstr "Feil ved lagring av bilde «%1»."
#. +> trunk5
#: DB/Category.cpp:182
#, kde-format
msgid "Error Saving Image"
msgstr "Feil ved lagring av bildet"
#. +> trunk5
#: DB/ImageDate.cpp:377
#, kde-format
msgctxt "Abbreviated month name"
msgid "jan"
msgstr "jan"
#. +> trunk5
#: DB/ImageDate.cpp:377
#, kde-format
msgctxt "Abbreviated month name"
msgid "feb"
msgstr "feb"
#. +> trunk5
#: DB/ImageDate.cpp:378
#, kde-format
msgctxt "Abbreviated month name"
msgid "mar"
msgstr "mar"
#. +> trunk5
#: DB/ImageDate.cpp:378
#, kde-format
msgctxt "Abbreviated month name"
msgid "apr"
msgstr "apr"
#. +> trunk5
#: DB/ImageDate.cpp:379
#, kde-format
msgctxt "Abbreviated month name"
msgid "may"
msgstr "mai"
#. +> trunk5
#: DB/ImageDate.cpp:379
#, kde-format
msgctxt "Abbreviated month name"
msgid "jun"
msgstr "jun"
#. +> trunk5
#: DB/ImageDate.cpp:380
#, kde-format
msgctxt "Abbreviated month name"
msgid "jul"
msgstr "jul"
#. +> trunk5
#: DB/ImageDate.cpp:380
#, kde-format
msgctxt "Abbreviated month name"
msgid "aug"
msgstr "aug"
#. +> trunk5
#: DB/ImageDate.cpp:381
#, kde-format
msgctxt "Abbreviated month name"
msgid "sep"
msgstr "sep"
#. +> trunk5
#: DB/ImageDate.cpp:381
#, kde-format
msgctxt "Abbreviated month name"
msgid "oct"
msgstr "okt"
#. +> trunk5
#: DB/ImageDate.cpp:382
#, kde-format
msgctxt "Abbreviated month name"
msgid "nov"
msgstr "nov"
#. +> trunk5
#: DB/ImageDate.cpp:382
#, kde-format
msgctxt "Abbreviated month name"
msgid "dec"
msgstr "des"
#. +> trunk5
#: DB/ImageDB.cpp:153
#, kde-format
msgid "Loading information from images"
msgstr "Laster inn informasjon fra bilder"
#. +> trunk5
#: DB/ImageSearchInfo.cpp:345
#, kde-format
msgctxt "As in No persons, no locations etc. I do realize that translators may have problem with this, but I need some how to indicate the category, and users may create their own categories, so this is the best I can do - Jesper."
msgid "No %1"
msgstr "Ingen %1"
#. +> trunk5
#: DB/ImageSearchInfo.cpp:354
#, kde-format
msgid "not"
msgstr "ikke"
#. +> trunk5
#: DB/ImageSearchInfo.cpp:359
#, kde-format
msgctxt "As in no other persons, or no other locations. I do realize that translators may have problem with this, but I need some how to indicate the category, and users may create their own categories, so this is the best I can do - Jesper."
msgid "No other %1"
msgstr "Ingen andre %1"
#. +> trunk5
#: DB/NewImageFinder.cpp:478
#, kde-format
msgid ""
"<p><b>Loading information from new files</b></p>"
"<p>Depending on the number of images, this may take some time.<br/>"
"However, there is only a delay when new images are found.</p>"
msgstr ""
"<p><b>Laster informasjon fra nye filer</b></p>"
" "
"<p>Dette kan ta litt tid, etter som hvor mange bilder det er.<br />"
" Det er likevel bare en forsinkelse når nye bilder finnes.</p>"
#. +> trunk5
#: DB/NewImageFinder.cpp:689
#, kde-format
msgid "<p><b>Calculating checksum for %1 file</b></p>"
msgid_plural "<p><b>Calculating checksums for %1 files</b></p>"
msgstr[0] "<p><b>Beregner sjekksum for %1 fil</b></p>"
msgstr[1] "<p><b>Beregner sjekksum for %1 filer</b></p>"
#. +> trunk5
#: DB/NewImageFinder.cpp:690
#, kde-format
msgid "<p>By storing a checksum for each image KPhotoAlbum is capable of finding images even when you have moved them on the disk.</p>"
msgstr "<p>KPhotoAlbum lagrer en sjekksum for hvert bilde og kan derfor finne bilder selv når du har flyttet dem på disken,</p>"
#. +> trunk5
#: DB/NewImageFinder.cpp:733
#, kde-format
msgid "Following files could not be read:"
msgstr "Følgende filer kunne ikke leses:"
#. +> trunk5
#: Exif/Database.cpp:105
#, kde-format
msgid ""
"<p>There was an error while accessing the Exif search database. The error is likely due to a broken database file.</p>"
"<p>To fix this problem run Maintenance->Recreate Exif Search database.</p>"
"<hr/>"
"<p>For debugging: the command that was attempted to be executed was:<br/>"
"%1</p>"
"<p>The error message obtained was:<br/>"
"%2</p>"
msgstr ""
#. +> trunk5
#: Exif/Database.cpp:120
#, kde-format
msgid "Error in Exif database"
msgstr ""
#. +> trunk5
#: Exif/Database.cpp:141
#, fuzzy, kde-format
#| msgid ""
#| "<p>There was an error while executing the SQL backend command. The error is likely due to a broken database file.</p>"
#| "<p>To fix this problem run Maintenance->Recreate Exif Search database.</p>"
#| "<hr/>"
#| "<p>For debugging: the command that was attempted to be executed was:<br/>"
#| "%1</p>"
#| "<p>The error message obtained was:<br/>"
#| "%2</p>"
msgid ""
"<p>There was an error while opening the Exif search database.</p>"
" "
"<p>To fix this problem run Maintenance->Recreate Exif Search database.</p>"
"<hr/>"
"<p>The error message obtained was:<br/>"
"%1</p>"
msgstr ""
"<p>Det oppsto en feil under kjøring av kommandoen i SQL-motoren. Dette skyldes antakelig en ødelagt databasefil.</p>"
"<p>Rett opp dette ved å kjøre Vedlikehold→Bygg Exif søkedatabasen på nytt.</p>"
" <hr />"
" "
"<p>Til hjelp i feilsøking: kommandoen som ble forsøkt kjørt var:<br />"
" %1></p>"
" "
"<p>Feilmeldingen som kom tilbake var:<br />"
" %2</p>"
#. +> trunk5
#: Exif/Database.cpp:190
#, kde-format
msgid ""
"<p>The Exif search database is corrupted and has no data.</p>"
" "
"<p>To fix this problem run Maintenance->Recreate Exif Search database.</p>"
msgstr ""
#. +> trunk5
#: Exif/Database.cpp:622
#, fuzzy, kde-format
#| msgid "Rereading EXIF information from all images"
msgid "Rereading Exif information from all images"
msgstr "Leser EXIF-informasjon på nytt fra alle bilder"
#. +> trunk5
#: Exif/InfoDialog.cpp:43
#, kde-format
msgctxt "@title:window"
msgid "Exif Information"
msgstr ""
#. +> trunk5
#: Exif/InfoDialog.cpp:77
#, kde-format
msgid "Exif label search: "
msgstr ""
#. +> trunk5
#: Exif/InfoDialog.cpp:83
#, kde-format
msgid "IPTC character set:"
msgstr "IPTC-tegnsett:"
#. +> trunk5
#: Exif/ReReadDialog.cpp:41
#, kde-format
msgctxt "@title:window"
msgid "Read Exif Info from Files"
msgstr ""
#. +> trunk5
#: Exif/ReReadDialog.cpp:48
#, kde-format
msgid "Update Exif search database"
msgstr ""
#. +> trunk5
#: Exif/ReReadDialog.cpp:54
#, kde-format
msgid "Update image date"
msgstr "Oppdater bildedato"
#. +> trunk5
#: Exif/ReReadDialog.cpp:57
#, fuzzy, kde-format
#| msgid "Use modification date if EXIF not found"
msgid "Use modification date if Exif not found"
msgstr "Bruk endringsdato hvis EXIF ikke finnes"
#. +> trunk5
#: Exif/ReReadDialog.cpp:60
#, fuzzy, kde-format
#| msgid "Update image orientation from EXIF information"
msgid "Update image orientation from Exif information"
msgstr "Bruk bildeorientering fra EXIF-informasjonen"
#. +> trunk5
#: Exif/ReReadDialog.cpp:63
#, fuzzy, kde-format
#| msgid "Update image description from EXIF information"
msgid "Update image description from Exif information"
msgstr "Oppdater bildebeskrivelsen fra EXIF-informasjonen"
#. +> trunk5
#: Exif/ReReadDialog.cpp:66
#, kde-format
msgid "Affected Files"
msgstr "Filer som blir påvirket"
#. +> trunk5
#: Exif/ReReadDialog.cpp:137
#, fuzzy, kde-format
#| msgid "<p>Be aware that setting the data from EXIF may <b>overwrite</b> data you have previously entered manually using the image configuration dialog.</p>"
msgid "<p>Be aware that setting the data from Exif may <b>overwrite</b> data you have previously entered manually using the image configuration dialog.</p>"
msgstr "<p>Merk at data som settes inn fra EXIF kan <b>overskrive</b> data som du tidligere har angitt manuelt med bildeoppsettsdialogen.</p>"
#. +> trunk5
#: Exif/ReReadDialog.cpp:140
#, kde-format
msgid "Override image dates"
msgstr "Overstyr bildedatoer"
#. +> trunk5
#: Exif/SearchDialog.cpp:42
#, kde-format
msgctxt "@title:window"
msgid "Exif Search"
msgstr ""
#. +> trunk5
#: Exif/SearchDialog.cpp:46
#, kde-format
msgid "Settings"
msgstr "Innstillinger"
#. +> trunk5
#: Exif/SearchDialog.cpp:67
#, kde-format
msgid "Aperture Value"
msgstr "Blenderåpning"
#. +> trunk5
#: Exif/SearchDialog.cpp:68
#, kde-format
msgid "F Number"
msgstr "F-tall"
#. +> trunk5
#: Exif/SearchDialog.cpp:78
#, kde-format
msgid "Focal Length"
msgstr "Brennvidde"
#. +> trunk5
#: Exif/SearchDialog.cpp:86
#, kde-format
msgctxt "As in 'A range from x to y'"
msgid "to"
msgstr "til"
#. +> trunk5
#: Exif/SearchDialog.cpp:95
#, kde-format
msgctxt "This is millimeter for focal length, like 35mm"
msgctxt "Inline as a verb, i.e. 'please show movies right on the page, not as links'"
msgid "Inline Movies in pages"
msgstr "Filmer innebygget i sider"
#. +> trunk5
#: HTMLGenerator/HTMLDialog.cpp:130
#, kde-format
msgctxt "Tag as in HTML-tag, not as in image tag"
msgid "Use HTML5 video tag"
msgstr ""
#. +> trunk5
#: HTMLGenerator/HTMLDialog.cpp:141
#, kde-format
msgid "<p>This selection will generate video files suitable for displaying on web. avconv and ffmpeg2theora are required for video file generation.</p>"
"<p>If you move the gallery to a remote location, set this to the destination URL.</p>"
"<p>This only affects the generated <filename>.kim</filename> file.</p>"
msgstr ""
#. +> trunk5
#: HTMLGenerator/HTMLDialog.cpp:354
#, fuzzy, kde-format
#| msgid "Open gallery in Browser"
msgid "Open gallery in browser:"
msgstr "Åpne galleriet i nettleser"
#. +> trunk5
#: HTMLGenerator/HTMLDialog.cpp:370
#, kde-format
msgid "You must select at least one resolution."
msgstr "Du må velge minst én oppløsning."
#. +> trunk5
#: HTMLGenerator/HTMLDialog.cpp:397
#, fuzzy, kde-format
#| msgid "Select a Directory"
msgid "Select base directory..."
msgstr "Velg en mappe"
#. +> trunk5
#: HTMLGenerator/HTMLDialog.cpp:410
#, kde-format
msgid "<p>You did not specify a base directory. This is the topmost directory for your images. Under this directory you will find each generated collection in separate directories.</p>"
msgstr "<p>Ingen basismappe er oppgitt. Dette er mappe på øverste nivå for bilder. I denne mappa finnes hver genererte samling i atskilte mapper.</p>"
#. +> trunk5
#: HTMLGenerator/HTMLDialog.cpp:414
#, kde-format
msgid "No Base Directory Specified"
msgstr "Ingen basismappe oppgitt"
#. +> trunk5
#: HTMLGenerator/HTMLDialog.cpp:420
#, kde-format
msgid "<p>You did not specify an output directory. This is a directory containing the actual images. The directory will be in the base directory specified above.</p>"
msgstr "<p>Ingen utdata-mappe er oppgitt. Dette er en mappe som inneholder selve bildene. Mappa vil ligge inne i basismappa oppgitt ovenfor.</p>"
#. +> trunk5
#: HTMLGenerator/HTMLDialog.cpp:423
#, kde-format
msgid "No Output Directory Specified"
msgstr "Ingen utdata-mappe oppgitt"
#. +> trunk5
#: HTMLGenerator/HTMLDialog.cpp:431
#, fuzzy, kde-format
#| msgid "<p>Error while reading information about %1. This is most likely because the directory does not exist.</p>"
msgid ""
"<p>Error while reading information about %1. This is most likely because the directory does not exist.</p>"
"<p>The error message was: %2</p>"
msgstr ""
"<p>Det oppsto en feil ved lesing av informasjon om %1. Dette er antakelig fordi mappa ikke finnes.</p>"
" "
#. +> trunk5
#: HTMLGenerator/HTMLDialog.cpp:440
#, kde-format
msgid "<p>%1 does not exist, is not a directory or cannot be written to.</p>"
msgstr "<p>%1 finnes ikke, er ikke en mappe eller kan ikke skrives til.</p>"
#. +> trunk5
#: HTMLGenerator/HTMLDialog.cpp:451
#, kde-format
msgid ""
"<p>Output directory %1 already exists. Usually, this means you should specify a new directory.</p>"
"<p>Should %2 be deleted first?</p>"
msgstr ""
"<p>Utdata-mappa %1 finnes fra før. Vanligvis betyr dette at du bør oppgi en ny mappe</p>"
msgid "Could not find any themes - this is very likely an installation error"
msgstr "Kan ikke finne noen temaer – dette er sannsynligvis en installasjonsfeil"
#. +> trunk5
#: HTMLGenerator/HTMLDialog.cpp:554
#, kde-format
msgid "More than one theme is set as default, using theme %1"
msgstr "Mer enn ett tema er angitt som standard, bruker tema %1"
#. +> trunk5
#: HTMLGenerator/HTMLDialog.cpp:561
#, kde-format
msgctxt "This is to show the author of the theme. E.g. copyright character (©) by itself will work fine on this context if no proper word is available in your language."
"<p>Feil mens video-minibilder ble trukket ut.<br/>"
" Feilen var: %1</p>"
#. +> trunk5
#: ImageManager/ExtractOneVideoFrame.cpp:156
#, kde-format
msgid ""
"Unable to extract video thumbnails from some files. Either the file is damaged in some way, or the video is ultra short. For your convenience, the token '%1' has been set on those videos.\n"
"\n"
"(You might need to wait till the video extraction led in your status bar has stopped blinking, to see all affected videos.)"
msgstr ""
#. +> trunk5
#: ImageManager/ThumbnailBuilder.cpp:98
#, kde-format
msgid "Building all thumbnails may take a long time."
msgstr ""
#. +> trunk5
#: ImageManager/ThumbnailBuilder.cpp:99
#, kde-format
msgid "Do you want to rebuild all of your thumbnails?"
msgid "Do not copy files, only generate .kim file"
msgstr "Ikke kopier filer, bare opprett .kim-fil"
#. +> trunk5
#: ImportExport/Export.cpp:111
#, kde-format
msgid "Automatically copy next to .kim file"
msgstr "Kopier automatisk ved siden av .kim-fila"
#. +> trunk5
#: ImportExport/Export.cpp:112
#, kde-format
msgid "Hard link next to .kim file"
msgstr "Fast lenke ved siden av .kim-fila"
#. +> trunk5
#: ImportExport/Export.cpp:113
#, kde-format
msgid "Symbolic link next to .kim file"
msgstr "Symbolsk lenke ved siden av .kim-fila"
#. +> trunk5
#: ImportExport/Export.cpp:123
#, kde-format
msgid "Compress export file"
msgstr "Komprimer eksportfil"
#. +> trunk5
#: ImportExport/Export.cpp:127
#, kde-format
msgid "Generate thumbnails"
msgstr "Lag minibilder"
#. +> trunk5
#: ImportExport/Export.cpp:135
#, kde-format
msgid "Limit maximum image dimensions to: "
msgstr "Begrens bildestørrelsen til høyst:"
#. +> trunk5
#: ImportExport/Export.cpp:147
#, kde-format
msgid ""
"<p>If your images are stored in a non-compressed file format then you may check this; otherwise, this just wastes time during import and export operations.</p>"
"<p>In other words, do not check this if your images are stored in jpg, png or gif; but do check this if your images are stored in tiff.</p>"
msgstr ""
"<p>Hvis bildene er lagret i et ikke-komprimert format kan du krysse av dette, ellers kaster det bare bort tid under import og eksport.</p>"
" "
"<p>Med andre ord, kryss av her hvis bildene er lagret i tiff, men ikke i jpg, png eller gif.</p>"
#. +> trunk5
#: ImportExport/Export.cpp:153
#, kde-format
msgid "<p>Generate thumbnail images</p>"
msgstr "<p>Lag minibilder</p>"
#. +> trunk5
#: ImportExport/Export.cpp:156
#, kde-format
msgid "<p>With this option you may limit the maximum dimensions (width and height) of your images. Doing so will make the resulting export file smaller, but will of course also make the quality worse if someone wants to see the exported images with larger dimensions.</p>"
msgstr "<p>Med dette valget kan du begrense dimensjonene (bredde og høyde) på bildene. Dette vil kunne gjøre eksportfila mindre, men naturligvis også gjøre kvaliteten dårliere hvis noen vil se på de eksporterte bildene med større dimensjoner.</p>"
#. +> trunk5
#: ImportExport/Export.cpp:163
#, kde-format
msgid ""
"<p>When exporting images, bear in mind that there are two things the person importing these images again will need:<br/>"
"1) meta information (image content, date etc.)<br/>"
"2) the images themselves.</p>"
"<p>The images themselves can either be placed next to the .kim file, or copied into the .kim file. Copying the images into the .kim file works well for a recipient who wants all, or most of those images, for example when emailing a whole group of images. However, when you place the images on the Web, a lot of people will see them but most likely only download a few of them. It works better in this kind of case, to separate the images and the .kim file, by place them next to each other, so the user can access the images s/he wants.</p>"
msgstr ""
"<p>Når bilder eksporteres, så husk på at den som importerer bildene igjen trenger;<br/>"
" 1) meta-informasjon (bildeinnhold, dato osv,)<br/>"
" 2) selve bildene.</p>"
" "
"<p>Selve bildene kan enten plasseres ved siden av .kim-fila eller kopieres inn i .kim-fila. Det er greitt å kopiere bildene inn i .kim-fila for en mottaker som vil ha alle eller de fleste bildene, f.eks. når en hel bunke bilder sendes med e-post; men når bildene legges på en nettside, så vil mange mennesker se dem men antakelig bare laste ned noen få av dem. I det siste tilfellet er det bedre å skille bildene og .kim-fila fra hverandre, slik at brukeren kan velge hvilke bilder hun/han vil ha.</p>"
#. +> trunk5
#: ImportExport/Export.cpp:242
#, kde-format
msgid "Error creating zip file"
msgstr "Feil ved oppretting av zip-fil"
#. +> trunk5
#: ImportExport/Export.cpp:256
#, kde-format
msgid "&Cancel"
msgstr "&Avbryt"
#. +> trunk5
#: ImportExport/Export.cpp:275
#, kde-format
msgid "Creating index file"
msgstr "Lager registerfil"
#. +> trunk5
#: ImportExport/Export.cpp:287
#, kde-format
msgid "Creating thumbnails"
msgstr "Lager minibilder"
#. +> trunk5
#: ImportExport/Export.cpp:309
#, kde-format
msgid "Copying image files"
msgstr "Kopierer bildefiler"
#. +> trunk5
#: ImportExport/Export.cpp:373
#, kde-format
msgid "Error writing file %1"
msgstr "Feil ved skriving til fil %1"
#. +> trunk5
#: ImportExport/Export.cpp:401
#, kde-format
msgid ""
"<p>Other KPhotoAlbum users may now load the import file into their database, by choosing <b>import</b> in the file menu.</p>"
"<p>If they find it on a web site, and the web server is correctly configured, all they need to do is simply to click it from within konqueror. To enable this, your web server needs to be configured for KPhotoAlbum. You do so by adding the following line to <b>/etc/httpd/mime.types</b> or similar:"
"This will make your web server tell konqueror that it is a KPhotoAlbum file when clicking on the link, otherwise the web server will just tell konqueror that it is a plain text file.</p>"
msgstr ""
"<p>Nå kan andre KPhotoAlbum-brukere laste inn importfila til sin database ved å velge <b>importer</b> i filmenyen.</p>"
" "
"<p>Hvis de finner den på en nettside, og nett-tjeneren er riktig satt opp, så trenger de bare å trykke på den inne i Konqueror. For å slå på dette må nettjeneren din settes opp for KPhotoAlbum. Det gjør du ved å legge til følgende linje i <b>/etc/httpd/mime.types</b> eller liknende: "
" Dette får nettjeneren din til å si til Konqueror at dette er en KPhotoAlbum-fil når brukeren trykker på lenka, ellers vil tjeneren bare si at det er en ren tekstfil.</p>"
#. +> trunk5
#: ImportExport/Export.cpp:410
#, kde-format
msgid "How to Use the Export File"
msgstr "Hvordan eksportfila brukes"
#. +> trunk5
#: ImportExport/Import.cpp:39
#, kde-format
msgid "KPhotoAlbum Export Files"
msgstr ""
#. +> trunk5
#: ImportExport/Import.cpp:71
#, kde-format
msgid "Unable to create temporary file"
msgstr "Klarte ikke opprette midlertidig fil"
#. +> trunk5
#: ImportExport/ImportDialog.cpp:96
#, kde-format
msgid "<p>XML file did not specify the source of the images, this is a strong indication that the file is corrupted</p>"
msgstr "<p>XML-fila oppga ikke kilde for bildene, dette er et sterkt tegn på at fila er ødelagt</p>"
#. +> trunk5
#: ImportExport/ImportDialog.cpp:130
#, kde-format
msgid ""
"<h1><font size=\"+2\">Welcome to KPhotoAlbum Import</font></h1>"
"This wizard will take you through the steps of an import operation. The steps are: "
"<ol>"
"<li>First you must select which images you want to import from the export file. You do so by selecting the checkbox next to the image.</li>"
"<li>Next you must tell KPhotoAlbum in which directory to put the images. This directory must of course be below the directory root KPhotoAlbum uses for images. KPhotoAlbum will take care to avoid name clashes</li>"
"<li>The next step is to specify which categories you want to import (People, Places, ... ) and also tell KPhotoAlbum how to match the categories from the file to your categories. Imagine you load from a file, where a category is called <b>Blomst</b> (which is the Danish word for flower), then you would likely want to match this with your category, which might be called <b>Blume</b> (which is the German word for flower) - of course given you are German.</li>"
"<li>The final steps, is matching the individual tokens from the categories. I may call myself <b>Jesper</b> in my image database, while you want to call me by my full name, namely <b>Jesper K. Pedersen</b>. In this step non matches will be highlighted in red, so you can see which tokens was not found in your database, or which tokens was only a partial match.</li>"
"</ol>"
msgstr ""
"<h1><font size=\"+2\">V eiviser for KPhotoAlbum Import</font></h1>"
"Denne veiviseren går gjennom stegene for en import-handling. Stegene er:"
"<ol>"
"<li>Først må du velge hvilke bilder du vil importere fra eksportfila. Det gjør du ved å krysse av i boksen ved siden av bildet.</li>"
"<li>Så må du si til KPhotoAlbum hvilken mappe som skal ha bildene. Denne mappa må naturligvis være under rot-mappa som KPhotoAlbum bruker til bilder. KPhotoAlbum vil passe på at det ikke oppstår navnekollisjoner</li>"
"<li>Neste steg er å bestemme hvilke kategorier du vil importere (Folk, Steder, … ) og også si til KPhotoAlbum hvordan kategoriene fra fila skal tilpasses dine egne kategorier. Tenk deg at du laster inn fra en fil hvor en kategori heter <b>Fiori</b> (som er italiensk for blomster), så vil du antakelig at dette skal passe med din egen kategori <b>Blomster</b> – hvis du altså bruker norskl språk.</li>"
"<li>Det siste steget er å tilpasse individuelle symboler fra kategoriene. Jeg kaller meg kanskje <b>Jesper</b> i min bildedatabase, mens du kanskje vil bruke mitt fulle navn, <b>Jesper K. Pedersen</b>. I dette steget vil symboler som ikke passer fremhevet i rødt, så du kan se hvilke symboler som ikke fantes i databasen din, eller hvilke symboler som bare hadde et delvis treff.</li>"
msgid "Copyright (C) 2003-2019 The KPhotoAlbum Development Team"
msgstr ""
#. +> trunk5
#: main.cpp:78
#, fuzzy, kde-format
#| msgid "Johannes Zarl"
msgid "Johannes Zarl-Zierl"
msgstr "Johannes Zarl"
#. +> trunk5
#: main.cpp:78
#, fuzzy, kde-format
#| msgid "Developer, Maintainer"
msgid "Development, Maintainer"
msgstr "Utvikler, vedlikeholder"
#. +> trunk5
#: main.cpp:79
#, fuzzy, kde-format
#| msgid "Robert L Krawitz"
msgid "Robert Krawitz"
msgstr "Robert L Krawitz"
#. +> trunk5
#: main.cpp:79
#, kde-format
msgid "Development, Optimization"
msgstr ""
#. +> trunk5
#: main.cpp:80
#, kde-format
msgid "Tobias Leupold"
msgstr ""
#. +> trunk5
#: main.cpp:80
#, kde-format
msgid "Development, Releases, Website"
msgstr ""
#. +> trunk5
#: main.cpp:81
#, kde-format
msgid "Jesper K. Pedersen"
msgstr "Jesper K. Pedersen"
#. +> trunk5
#: main.cpp:81
#, kde-format
msgid "Former Maintainer, Project Creator"
msgstr ""
#. +> trunk5
#: main.cpp:83
#, kde-format
msgid "Hassan Ibraheem"
msgstr "Hassan Ibraheem"
#. +> trunk5
#: main.cpp:84
#, kde-format
msgid "Jan Kundrát"
msgstr "Jan Kundrát"
#. +> trunk5
#: main.cpp:85
#, kde-format
msgid "Andreas Neustifter"
msgstr "Andreas Neustifter"
#. +> trunk5
#: main.cpp:86
#, kde-format
msgid "Tuomas Suutari"
msgstr "Tuomas Suutari"
#. +> trunk5
#: main.cpp:87
#, kde-format
msgid "Miika Turkia"
msgstr "Miika Turkia"
#. +> trunk5
#: main.cpp:88
#, kde-format
msgid "Henner Zeller"
msgstr "Henner Zeller"
#. +> trunk5
#: main.cpp:91
#, kde-format
msgid "Marco Caldarelli"
msgstr "Marco Caldarelli"
#. +> trunk5
#: main.cpp:91
#, fuzzy, kde-format
#| msgid "Patch for making it possible to reread EXIF info using a nice dialog."
msgid "Patch for making it possible to reread Exif info using a nice dialog."
msgstr "Patch som gjør det mulig å lese EXIF-informasjon på nytt med en fin dialog."
#. +> trunk5
#: main.cpp:92
#, kde-format
msgid "Jean-Michel FAYARD"
msgstr "Jean-Michel FAYARD"
#. +> trunk5
#: main.cpp:92
#, kde-format
msgid "(.) Patch with directory info made available through the browser. (.) Patch for adding a check box for \"and/or\" searches in the search page."
msgstr "(.) Patch med mappeinformasjon gjort tilgjengelig via nettleser. (.) Patch som legger til avkryssingsboks for «og/eller»søk på søkesiden."
#. +> trunk5
#: main.cpp:93
#, kde-format
msgid "Wes Hardaker"
msgstr "Wes Hardaker"
#. +> trunk5
#: main.cpp:93
#, kde-format
msgid "Some very useful features to improve workflow"
msgstr "Noen svært nyttige funksjoner som forbedrer arbeidsflyten"
#. +> trunk5
#: main.cpp:94
#, kde-format
msgid "Reimar Imhof"
msgstr "Reimar Imhof"
#. +> trunk5
#: main.cpp:94
#, kde-format
msgid "Patch to sort items in option listboxes"
msgstr "Patch for å sortere elementer i valg-listebokser"
#. +> trunk5
#: main.cpp:95
#, kde-format
msgid "Christoph Moseler"
msgstr "Christoph Moseler"
#. +> trunk5
#: main.cpp:95
#, kde-format
msgid "Numerous patches for lots of bugs plus patches for a few new features"
msgstr "Tallrike patcher for mange feil, og patcher for noen få nye funksjoner"
#. +> trunk5
#: main.cpp:96
#, kde-format
msgid "Teemu Rytilahti"
msgstr "Teemu Rytilahti"
#. +> trunk5
#: main.cpp:97
#, kde-format
msgid "Theme support for HTML generation"
msgstr ""
#. +> trunk5
#: main.cpp:98
#, kde-format
msgid "Thomas Schwarzgruber"
msgstr "Thomas Schwarzgruber"
#. +> trunk5
#: main.cpp:98
#, fuzzy, kde-format
#| msgid "Patch to sort images in the thumbnail view, plus reading time info out of EXIF images for existing images"
msgid "Patch to sort images in the thumbnail view, plus reading time info out of Exif images for existing images"
msgstr "Patch for å sortere bilder i minibildevisningen, og lese tidsinformasjon fra EXIF-bilder for eksisterende bilder"
#. +> trunk5
#: main.cpp:99
#, kde-format
msgid "Clytie Siddall"
msgstr "Clytie Siddall"
#. +> trunk5
#: main.cpp:99
#, kde-format
msgid "Tremendous help with the English text in the application."
msgstr "Enorm hjelp med den engelske teksten i programmet."
#. +> trunk5
#: main.cpp:100
#, kde-format
msgid "Will Stephenson"
msgstr "Will Stephenson"
#. +> trunk5
#: main.cpp:100
#, kde-format
msgid "Developing an Icon for KPhotoAlbum"
msgstr "Utvikler et ikon for KPhotoAlbum"
#. +> trunk5
#: main.cpp:101
#, kde-format
msgid "Marcel Wiesweg"
msgstr "Marcel Wiesweg"
#. +> trunk5
#: main.cpp:101
#, kde-format
msgid "Patch which speed up loading of thumbnails plus preview in image property dialog."
msgstr "Patch som gjør det raskere å laste inn minibilder, og foråndsvisning i dialogvinduet for bildeegenskaper."
#. +> trunk5
#: MainWindow/AutoStackImages.cpp:51
#, fuzzy, kde-format
#| msgid "Automatically Stack Images"
msgctxt "@title:window"
msgid "Automatically Stack Images"
msgstr "Stable bilder automatisk"
#. +> trunk5
#: MainWindow/AutoStackImages.cpp:61
#, kde-format
msgid "Stack images with identical MD5 sum"
msgstr "Stable bilder med identisk MD5-sum"
#. +> trunk5
#: MainWindow/AutoStackImages.cpp:69
#, kde-format
msgid "Stack images based on file version detection"
msgstr "Stable bilder basert på sjekk av filversjon"
#. +> trunk5
#: MainWindow/AutoStackImages.cpp:73
#, kde-format
msgid "Original to top"
msgstr "Originalen øverst"
#. +> trunk5
#: MainWindow/AutoStackImages.cpp:85
#, kde-format
msgctxt "The whole sentence should read: *Stack images that are shot within x seconds of each other*. So images that are shot in one burst are automatically stacked together. (This sentence is before the x.)"
msgid "Stack images that are shot within"
msgstr "Stable bilder som er tatt innen"
#. +> trunk5
#: MainWindow/AutoStackImages.cpp:95
#, kde-format
msgctxt "The whole sentence should read: *Stack images that are shot within x seconds of each other*. (This being the text after x.)"
msgid "seconds"
msgstr "sekunder"
#. +> trunk5
#: MainWindow/AutoStackImages.cpp:98
#, kde-format
msgid "AutoStacking Options"
msgstr "Valg for Autostabling"
#. +> trunk5
#: MainWindow/AutoStackImages.cpp:102
#, kde-format
msgid "Include matching image to appropriate stack (if one exists)"
msgstr "Ta med liknende bilde i passende stabel (hvis det finnes)"
#. +> trunk5
#: MainWindow/AutoStackImages.cpp:106
#, kde-format
msgid "Unstack images from their current stack and create new one for the matches"
msgstr "Ta bort bilder fra gjeldende stabel og lag en ny stabel for bilder som passer"
"<p>Below you may see the list of compile- and runtime features KPhotoAlbum has, and their status:</p>"
"%1"
msgstr ""
"<h1>Oversikt</h1>"
"<p>Nedenfor kan du se lista over funksjoner som er kompilert inn i KPhotoAlbum, og deres status:</p>"
"%1"
#. +> trunk5
#: MainWindow/FeatureDialog.cpp:49
#, fuzzy, kde-format
#| msgid ""
#| "<h1>What can I do if I miss a feature?</h1>"
#| "<p>If you compiled KPhotoAlbum yourself, then please review the sections below to learn what to install to get the feature in question. If on the other hand you installed KPhotoAlbum from a binary package, please tell whoever made the package about this defect, eventually including the information from the section below.</p>"
#| "<p>In case you are missing a feature and you did not compile KPhotoAlbum yourself, please do consider doing so. It really is not that hard. If you need help compiling KPhotoAlbum, feel free to ask on the <a href=\"http://mail.kdab.net/mailman/listinfo/kphotoalbum\">KPhotoAlbum mailing list</a></p>"
#| "<p>The steps to compile KPhotoAlbum can be seen on <a href=\"http://www.kphotoalbum.org/index.php?page=compile\">the KPhotoAlbum home page</a>. If you have never compiled a KDE application, then please ensure that you have the developer packages installed, in most distributions they go under names like kdelibs<i>-devel</i></p>"
msgid ""
"<h1>What can I do if I miss a feature?</h1>"
"<p>If you compiled KPhotoAlbum yourself, then please review the sections below to learn what to install to get the feature in question. If on the other hand you installed KPhotoAlbum from a binary package, please tell whoever made the package about this defect, eventually including the information from the section below.</p>"
"<p>In case you are missing a feature and you did not compile KPhotoAlbum yourself, please do consider doing so. It really is not that hard. If you need help compiling KPhotoAlbum, feel free to ask on the <a href=\"http://mail.kdab.com/mailman/listinfo/kphotoalbum\">KPhotoAlbum mailing list</a></p>"
"<p>The steps to compile KPhotoAlbum can be seen on <a href=\"http://www.kphotoalbum.org/index.php?page=compile\">the KPhotoAlbum home page</a>. If you have never compiled a KDE application, then please ensure that you have the developer packages installed, in most distributions they go under names like kdelibs<i>-devel</i></p>"
msgstr ""
"<h1>Hva kan jeg gjøre hvis jeg savner en funksjon?</h1>"
"<p>Hvis du kompilerte KPhotoAlbum selv, så se igjennom avsnittene nedenfor for å se hva du kan installere for å få den funksjonen du søker. Hvis du på den annen side installerte KPhotoAlbum fra en binær pakke, så fortell den som laget pakka om denne mangelen, ta eventuelt med opplysninger fra avsnittet nedenfor.</p>"
"<p> Hvis du savner en funksjon og ikke kompilerte KPhotoAlbum selv, tenk etter om du kunne gjøre det. Det er faktisk ikke så vanskelig. Hvis du trenger hjelp med å kompilere KPhotoAlbum, så spør gjerne på <a href=\"http://mail.kdab.net/mailman/listinfo/kphotoalbum\">e-postlista for KPhotoAlbum</a></p>"
"<p>Det du må gjøre for å kompilere KPhotoAlbum finner du på <a href=\"http://www.kphotoalbum.org/index.php?page=compile\">KPhotoAlbums nettsted.</a> Hvis du aldri har kompilert et KDE-program før, så pass på at du har installert utviklerpakkene, i de fleste distribusjoner heter de noe slikt som kdelibs<i>-devel</i></p>"
#. +> trunk5
#: MainWindow/FeatureDialog.cpp:63
#, kde-format
msgid ""
"<h1><a name=\"kipi\">Plug-ins support</a></h1>"
"<p>KPhotoAlbum has a plug-in system with lots of extensions. You may among other things find plug-ins for:"
"<ul>"
"<li>Writing images to cds or dvd's</li>"
"<li>Adjusting timestamps on your images</li>"
"<li>Making a calendar featuring your images</li>"
"<li>Uploading your images to flickr</li>"
"<li>Upload your images to facebook</li>"
"</ul>"
"</p>"
"<p>The plug-in library is called KIPI, and may be downloaded from the <a href=\"http://userbase.kde.org/KIPI\">KDE Userbase Wiki</a></p>"
msgstr ""
"<h1><a name=\"kipi\">Støtte for programtillegg</a></h1>"
"<p>KPhotoAlbum har et system for programtillegg med mange utvidelser. Blant annet finnes det programtillegg for å:"
"<ul>"
"<li>Skrive bilder til CD-er eller DVD-er </li>"
"<li>Justere tidsmerkene på bildene </li>"
"<li>Lage en kalender med bildene dine</li>"
"<li>Laste opp bildene dine til flickr </li>"
"<li>Laste opp bildene dine til facebook</li>"
" </ul>"
"</p>"
"<p>Biblioteket for programtillegg heter KIPI og kan lastes ned fra <a href=\"http://userbase.kde.org/KIPI\">KDE Userbase Wiki </a></p>"
#| "<p>KPhotoAlbum allows you to search using a certain number of EXIF tags. For this KPhotoAlbum needs an Sqlite database. In addition the qt package for sqlite (e.g.qt-sql-sqlite) must be installed.</p>"
"<p>KPhotoAlbum allows you to search using a certain number of Exif tags. For this KPhotoAlbum needs an SQLite database. In addition the Qt package for SQLite (e.g. qt-sql-sqlite) must be installed.</p>"
msgstr ""
"<h1><a name=\"database\">Støtte for SQL-database</a></h1>"
"<p>Med KPhotoAlbum kan du søke etter et visst antall EXIF-merker. KPhotoAlbum trenger en Sqlite-database til dette; dessuten må qt-pakka for sqlite (f.eks. qt-sql-sqlite) være installert.</p>"
#. +> trunk5
#: MainWindow/FeatureDialog.cpp:81
#, kde-format
msgid ""
"<h1><a name=\"geomap\">Map view for geotagged images</a></h1>"
"<p>If KPhotoAlbum has been built with support for libkgeomap, KPhotoAlbum can show images with GPS information on a map.</p>"
msgstr ""
#. +> trunk5
#: MainWindow/FeatureDialog.cpp:86
#, kde-format
msgid ""
"<h1><a name=\"video\">Video support</a></h1>"
"<p>KPhotoAlbum relies on Qt's Phonon architecture for displaying videos; this in turn relies on GStreamer. If this feature is not enabled for you, have a look at the <a href=\"http://userbase.kde.org/KPhotoAlbum#Video_Support\">KPhotoAlbum wiki article on video support</a>.</p>"
msgstr ""
"<h1><a name=\"video\">Video-støtte</a></h1>"
"<p>KPhotoAlbum bruker Qts Phonon-arkitektur for å vise videoer, og den igjen støtter seg til GStreamer. Hvis denne funksjonen ikke er slått på for deg, ta en titt på <a href=\"http://userbase.kde.org/KPhotoAlbum#Video_Support\">KPhotoAlbum wiki-artikkelen om videostøtte</a>.</p>"
#. +> trunk5
#: MainWindow/FeatureDialog.cpp:94
#, kde-format
msgid "<p>No video mime types found, which indicates that either Qt was compiled without phonon support, or there were missing codecs</p>"
msgstr "<p>Fant ingen video mime-typer, som tyder på at enten var Qt kompilert uten phonon-støtte, eller kodeker manglet</p>"
#. +> trunk5
#: MainWindow/FeatureDialog.cpp:96
#, kde-format
msgid ""
"<p>Phonon is capable of playing movies of these mime types:"
"<ul>"
"<li>%1</li>"
"</ul>"
"</p>"
msgstr ""
"<p>Phonon kan spille filmer med disse mimetypene:"
msgid "Use <databaseFile> instead of the default."
msgstr ""
#. +> trunk5
#: MainWindow/Options.cpp:47
#, fuzzy, kde-format
#| msgid "Starts KPhotoAlbum with a prebuilt set of demo images"
msgid "Starts KPhotoAlbum with a prebuilt set of demo images."
msgstr "Starter KPhotoAlbum med forhåndslagede demo-bilder"
#. +> trunk5
#: MainWindow/Options.cpp:50
#, fuzzy, kde-format
#| msgid "Import file"
msgid "Import file."
msgstr "Importer fil"
#. +> trunk5
#: MainWindow/Options.cpp:51
#, kde-format
msgid "file.kim"
msgstr ""
#. +> trunk5
#: MainWindow/Options.cpp:57
#, fuzzy, kde-format
#| msgctxt "Comment"
#| msgid "Edit your network connections"
msgid "Listen for network connections."
msgstr "Rediger dine nettverkstilkoblinger"
#. +> trunk5
#: MainWindow/Options.cpp:61
#, kde-format
msgid "Listen for network connections on address <interface_address>."
msgstr ""
#. +> trunk5
#: MainWindow/Options.cpp:62
#, kde-format
msgid "interface_address"
msgstr ""
#. +> trunk5
#: MainWindow/Options.cpp:64
#, fuzzy, kde-format
#| msgid "Search for new images and videos on startup"
msgid "Search for new images on startup."
msgstr "Let etter nye bilder og filmer ved oppstart"
#. +> trunk5
#: MainWindow/RunDialog.cpp:40
#, no-c-format, kde-format
msgid ""
"<p>Enter your command to run below:</p>"
"<p><i>%all will be replaced with a file list</i></p>"
msgstr ""
"<p>Skriv inn nedenfor kommandoen som skal kjøres:</p>"
" "
"<p><i>%all blir erstattet med en filliste</i></p>"
#. +> trunk5
#: MainWindow/RunDialog.cpp:49
#, no-c-format, kde-format
msgid ""
"<p>Enter the command you want to run on your image file(s). KPhotoAlbum will run your command and replace any '%all' tokens with a list of your files. For example, if you entered:</p>"
"<ul>"
"<li>cp %all /tmp</li>"
"</ul>"
"<p>Then the files you selected would be copied to the /tmp directory</p>"
"<p>You can also use %each to have a command be run once per file.</p>"
msgstr ""
"<p>Skriv den kommandoen du vil kjøre på bildefila/filene. KPhotoAlbum kjører kommandoen og erstatter alle «%all»-symboler med en liste over filene dine. Hvis du for eksempel skriver inn:</p>"
"<ul> "
"<li>cp %all /tmp</li>"
" </ul>"
"<p>så vil de filene du har markert bli kopiert til mappa /tmp</p>"
" "
"<p>Du kan også bruke %each for å få kommandoen til å bli kjørt én gang for hver fil.</p>"
#. +> trunk5
#: MainWindow/RunDialog.cpp:78
#, no-c-format, kde-format
msgctxt "As in 'Execute a command and replace any occurrence of %all with the filenames of all selected files'"
msgid "%all"
msgstr "%alle"
#. +> trunk5
#: MainWindow/RunDialog.cpp:80
#, no-c-format, kde-format
msgctxt "As in 'Execute a command for each selected file in turn and replace any occurrence of %each with the filename "
msgid "%each"
msgstr "%hver"
#. +> trunk5
#: MainWindow/SearchBar.cpp:33
#, kde-format
msgctxt "@label:textbox label on the search bar"
msgid "Search:"
msgstr "Søk:"
#. +> trunk5
#: MainWindow/StatisticsDialog.cpp:44
#, kde-format
msgid ""
"<h1>Description</h1>"
"<table>"
"<tr>"
"<td># of Items</td>"
"<td>This is the number of different items in the category</td>"
"</tr>"
"<tr>"
"<td>Tags Total</td>"
"<td>This is a count of how many tags was made,<br/>"
"i.e. a simple counting though all the images</td>"
"</tr>"
"<tr>"
"<td>Tags Per Picture</td>"
"<td>This tells you how many tags are on each picture on average</td>"
"</tr>"
"</table>"
"<br/>"
"<br/>"
"Do not get too attached to this dialog, it has the problem that it counts categories AND subcategories,<br/>"
"so if an image has been taken in Las Vegas, Nevada, USA, then 3 tags are counted for that image,<br/>"
"while it should only be one.<br/>"
"I am not really sure if it is worth fixing that bug (as it is pretty hard to fix),<br/>"
"so maybe the dialog will simply go away again"
msgstr ""
"<h1>Beskrivelse</h1>"
"<table>"
"<tr>"
"<td>no. elementer</td>"
"<td>Dette er antall forskjellige elementer i kategorien</td>"
"</tr>"
"<tr>"
"<td>Totalt merker</td>"
"<td> Dette er en opptelling av hvor mange merker som ble satt,<br/>"
"dvs. en enkel telling gjennom alle bilder</td>"
"</tr>"
"<tr>"
"<td>Merke pr. bilde</td>"
"<td>Dette viser gjennomsnittlig antall merker på ett bilde</td>"
"</tr>"
"</table>"
"<br/>"
"<br/>"
" Ikke legg for mye vekt på denne dialogen, den har det problemet at den teller kategorier OG underkategorier,<br/>"
" så hvis et bilde er tatt på Finse, Hardangervidda, Norge, så telles tre merker for det bildet mens det skulle <br/>"
" vært bare ett.<br/>"
" Jeg er ikke sikker på om det er verd strevet å rette på den feilen (som er ganske vanskelig å rette)<br/>"
" så kanskje dialogen vil bare forsvinne igjen"
#. +> trunk5
#: MainWindow/StatisticsDialog.cpp:61
#, kde-format
msgid "<h1>Statistics</h1>"
msgstr "<h1>Statistikk</h1>"
#. +> trunk5
#: MainWindow/StatisticsDialog.cpp:68
#, kde-format
msgid "Category"
msgstr "Kategori"
#. +> trunk5
#: MainWindow/StatisticsDialog.cpp:68
#, kde-format
msgid "# of Items"
msgstr "no. elementer"
#. +> trunk5
#: MainWindow/StatisticsDialog.cpp:68
#, kde-format
msgid "Tags Totals"
msgstr "Totalt merker"
#. +> trunk5
#: MainWindow/StatisticsDialog.cpp:68
#, kde-format
msgid "Tags Per Picture"
msgstr "Merker pr. bilde"
#. +> trunk5
#: MainWindow/StatisticsDialog.cpp:113
#, kde-format
msgid "Tag indication completed annotation"
msgstr "Merke som viser fullført merknad"
#. +> trunk5
#: MainWindow/StatisticsDialog.cpp:119
#, kde-format
msgid "If you use a specific tag to indicate that an image has been tagged, then specify it here."
msgstr "Hvis du bruker et spesielt merke for å vise at et bilde er blitt kommentert, så oppgi det her."
msgid "Select tokens to remove from all images and videos:"
msgstr "Velg symboler som skal fjernes fra alle bilder og filmer:"
#. +> trunk5
#: MainWindow/TokenEditor.cpp:67
#, kde-format
msgid "Select None"
msgstr "Velg ingen"
#. +> trunk5
#: MainWindow/WelcomeDialog.cpp:57
#, kde-format
msgid ""
"<h1>Welcome to KPhotoAlbum</h1>"
"<p>KPhotoAlbum is a powerful free tool to archive, tag and manage your photos and videos. It will not modify or change your precious files, it only indexes them and lets you easily find and manage your photos and videos.</p>"
"<p>Start by showing KPhotoAlbum where your photos are by pressing on Create My Own Database. Select this button also if you have an existing KPhotoAlbum database that you want to start using again.</p>"
"<p>If you feel safer first trying out KPhotoAlbum with prebuilt set of images, press the Load Demo button.</p>"
msgstr ""
"<h1>Dette er KPhotoAlbum</h1>"
" "
"<p>KPhotoAlbum er et fritt, slagkraftig verktøy som kan arkivere, merke og håndtere dine bilder og videoer. Det vil ikke endre noe ved dine verdifulle bilder, det bare indekserer dem og gjør det lett å finne og holde styr på bildene og videoene dine.</p>"
" "
"<p>Begynn med å vise KPhotoAlbum hvor bildene dine er, ved å trykke på «Opprett min egen database». Trykk denne knappe også hvis du allerede har en KPhotoAlbum-database som du vil begynne å bruke igjen.</p>"
" "
"<p>Trykk knappen «Last inn demo» hvis du kjenner deg tryggere ved å forsøke KPhotoAlbum først med bilder definert på forhånd.</p>"
#. +> trunk5
#: MainWindow/WelcomeDialog.cpp:72
#, kde-format
msgid "Create My Own Database..."
msgstr "Opprett min egen database …"
#. +> trunk5
#: MainWindow/WelcomeDialog.cpp:75
#, kde-format
msgid "Load Demo"
msgstr "Last inn demo"
#. +> trunk5
#: MainWindow/WelcomeDialog.cpp:78
#, kde-format
msgid "Check My Feature Set"
msgstr "Sjekk funksjonene"
#. +> trunk5
#: MainWindow/WelcomeDialog.cpp:112
#, kde-format
msgid ""
"<h1>KPhotoAlbum database creation</h1>"
"<p>You need to show where the photos and videos are for KPhotoAlbum to find them. They all need to be under one root directory, for example /home/user/Images. In this directory you can have as many subdirectories as you want, KPhotoAlbum will find them all for you.</p>"
"<p>Feel safe, KPhotoAlbum will not modify or edit any of your images, so you can simply point KPhotoAlbum to the directory where you already have all your images.</p>"
"<p>If you have an existing KPhotoAlbum database and root directory somewhere, point KPhotoAlbum to that directory to start using it again.</p>"
msgstr ""
"<h1>Opprette KPhotoAlbum-database</h1>"
" "
"<p>Du må vise hvor bilder og videoer er for at KPhotoAlbum skal finne dem. Alle må være under samme rotmappe, for eksempel /home/bruker/bilder. I denne mappa kan det være så mange undermapper du vil, KPhotoAlbum finner dem alle.</p>"
" "
"<p>Ta det rolig, KPhotoAlbum vil ikke redigere eller endre noe ved bildene, så du kan bare vise KPhotoAlbum til rotmappa der alle bildene dine ligger fra før.</p>"
" "
"<p>Hvis du har en KPhotoAlbum-database og rotmappe liggende et sted, så vis KPhotoAlbum til den rotmappa for å bruke den igjen.</p>"
#. +> trunk5
#: MainWindow/WelcomeDialog.cpp:127
#, kde-format
msgid "Image/Video root directory: "
msgstr "Rot-mappe for bilder/film"
#. +> trunk5
#: MainWindow/WelcomeDialog.cpp:167
#, kde-format
msgid "Directory does not exist, create it?"
msgstr "Mappa finnes ikke, skal den opprettes?"
#. +> trunk5
#: MainWindow/WelcomeDialog.cpp:171
#, kde-format
msgid "Could not create directory %1"
msgstr "Klarte ikke opprette mappe %1"
#. +> trunk5
#: MainWindow/WelcomeDialog.cpp:176
#, kde-format
msgid "%1 exists, but is not a directory"
msgstr "%1 finnes, men er ikke en mappe"
#. +> trunk5
#: MainWindow/WelcomeDialog.cpp:192
#, kde-format
msgid ""
"<p>KPhotoAlbum does not seem to be built with support for all its features. The following is a list indicating what you may be missing:"
"<ul>%1</ul>"
"</p>"
"<p>For details on how to solve this problem, please choose <b>Help</b>|<b>KPhotoAlbum Feature Status</b> from the menus.</p>"
msgid "Congratulations: all dynamic features have been enabled."
msgstr "Gratulerer: Alle dynamiske funksjoner er slått på."
#. +> trunk5
#: MainWindow/Window.cpp:151
#, kde-format
msgid "Loading Database"
msgstr "Laster inn database"
#. +> trunk5
#: MainWindow/Window.cpp:158
#, kde-format
msgid "Loading Main Window"
msgstr "Laster hovedvinduet"
#. +> trunk5
#: MainWindow/Window.cpp:267
#, kde-format
msgid "Searching for New Files"
msgstr "Leter etter nye filer"
#. +> trunk5
#: MainWindow/Window.cpp:274
#, kde-format
msgid "Loading Plug-ins"
msgstr "Laster progrqamtillegg"
#. +> trunk5
#: MainWindow/Window.cpp:306
#, kde-format
msgid ""
"<p><b>Delete Your Temporary Demo Database</b></p>"
"<p>I hope you enjoyed the KPhotoAlbum demo. The demo database was copied to /tmp, should it be deleted now? If you do not delete it, it will waste disk space; on the other hand, if you want to come back and try the demo again, you might want to keep it around with the changes you made through this session.</p>"
msgstr ""
"<p><b>Slett den midlertidige demo-databasen</b></p>"
"<p>Vi håper du likte demoen av KPhotoAlbum. Demo-databasen ble kopiert til /tmp, skal den slettes nå? Hvis du ikke sletter den er det bortkastet diskplass; men kanskje du har lyst til å komme tilbake og forsøke demoen igjen, da kan du la den ligge med de endringene du har gjort i løpet av denne økta.</p>"
#. +> trunk5
#: MainWindow/Window.cpp:311
#, kde-format
msgid "Delete Demo Database"
msgstr "Slett demo-databasen"
#. +> trunk5
#: MainWindow/Window.cpp:325
#, kde-format
msgid "Do you want to save the changes?"
msgstr "Vil du lagre endringene?"
#. +> trunk5
#: MainWindow/Window.cpp:326
#, kde-format
msgid "Save Changes?"
msgstr "Lagre endringer?"
#. +> trunk5
#: MainWindow/Window.cpp:369
#, kde-format
msgid "Some of the selected images already belong to a stack. Do you want to remove them from their stacks and create a completely new one?"
msgstr "Noen av de valgte bildene tilhører alt en stakk. VIl du ta dem ut av stakkene og lage en helt ny stakk?"
msgstr "Kjør lysbildeframvisning i vilkårlig rekkefølge"
#. +> trunk5
#: MainWindow/Window.cpp:832
#, kde-format
msgid "Collapse all stacks"
msgstr "Fold sammen alle stakker"
#. +> trunk5
#: MainWindow/Window.cpp:838
#, kde-format
msgid "Expand all stacks"
msgstr "Fold ut alle stakker"
#. +> trunk5
#: MainWindow/Window.cpp:843
#, kde-format
msgid "Show &Oldest First"
msgstr "Vis &eldste først"
#. +> trunk5
#: MainWindow/Window.cpp:848
#, kde-format
msgid "Show &Newest First"
msgstr "Vis &nyeste først"
#. +> trunk5
#: MainWindow/Window.cpp:853
#, kde-format
msgid "Sort Selected by Date && Time"
msgstr "Sorter utvalget etter dato og tid"
#. +> trunk5
#: MainWindow/Window.cpp:856
#, kde-format
msgid "Limit View to Selection"
msgstr "Begrens visning til det utvalgte"
#. +> trunk5
#: MainWindow/Window.cpp:859
#, kde-format
msgid "Jump to Context"
msgstr "Hopp til kontekst"
#. +> trunk5
#: MainWindow/Window.cpp:864
#, kde-format
msgid "Lock Images"
msgstr "Lås bilder"
#. +> trunk5
#: MainWindow/Window.cpp:867
#, kde-format
msgid "Unlock"
msgstr "Lås opp"
#. +> trunk5
#: MainWindow/Window.cpp:870
#, kde-format
msgid "Change Password..."
msgstr "Endre passord …"
#. +> trunk5
#: MainWindow/Window.cpp:874
#, kde-format
msgid "Lock Away All Other Items"
msgstr "Lås bort alle andre elementer"
#. +> trunk5
#: MainWindow/Window.cpp:877
#, kde-format
msgid "Lock Away Current Set of Items"
msgstr "Lås bort disse elementene"
#. +> trunk5
#: MainWindow/Window.cpp:881
#, kde-format
msgid "Display Images and Videos Not on Disk"
msgstr "Vis bilder og filmer som ikke er på disken"
#. +> trunk5
#: MainWindow/Window.cpp:884
#, kde-format
msgid "Display Images and Videos with Incomplete Dates..."
msgstr "Vis bilder og filmer med ufullstendige datoer …"
#. +> trunk5
#: MainWindow/Window.cpp:888
#, kde-format
msgid "Display Images and Videos with Changed MD5 Sum"
msgstr "Vis bilder og filmer med endret MD5-dum"
#. +> trunk5
#: MainWindow/Window.cpp:892
#, kde-format
msgid "Merge duplicates"
msgstr "Flett sammen duplikat"
#. +> trunk5
#: MainWindow/Window.cpp:894
#, kde-format
msgid "Recalculate Checksum"
msgstr "Beregn sjekksum på nytt"
#. +> trunk5
#: MainWindow/Window.cpp:898
#, kde-format
msgid "Rescan for Images and Videos"
msgstr "Skann på nytt etter bilder og filmer"
#. +> trunk5
#: MainWindow/Window.cpp:901
#, kde-format
msgid "Recreate Exif Search Database"
msgstr "Gjenopprett Exif søkedatabase"
#. +> trunk5
#: MainWindow/Window.cpp:904
#, fuzzy, kde-format
#| msgid "Read From File..."
msgid "Read Exif Info from Files..."
msgstr "Les fra fil …"
#. +> trunk5
#: MainWindow/Window.cpp:907
#, kde-format
msgid "Sort All by Date && Time"
msgstr "Sorter alle etter dato og tid"
#. +> trunk5
#: MainWindow/Window.cpp:911
#, kde-format
msgid "Automatically Stack Selected Images..."
msgstr "Stable utvalgte bilder automatisk …"
#. +> trunk5
#: MainWindow/Window.cpp:914
#, kde-format
msgid "Build Thumbnails"
msgstr "Bygg miniatyrbilder"
#. +> trunk5
#: MainWindow/Window.cpp:917
#, fuzzy, kde-format
#| msgid "Statistics"
msgid "Statistics..."
msgstr "Statistikk"
#. +> trunk5
#: MainWindow/Window.cpp:921
#, kde-format
msgid "Mark As Untagged"
msgstr ""
#. +> trunk5
#: MainWindow/Window.cpp:929
#, kde-format
msgid "Enable All Messages"
msgstr "Slå på alle meldinger"
#. +> trunk5
#: MainWindow/Window.cpp:932
#, kde-format
msgid "Configure Current View"
msgstr "Sett opp gjeldende visning"
#. +> trunk5
#: MainWindow/Window.cpp:940
#, kde-format
msgid "Tree"
msgstr "Tre"
#. +> trunk5
#: MainWindow/Window.cpp:945
#, kde-format
msgid "Tree with User Icons"
msgstr "Tre med brukerikoner"
#. +> trunk5
#: MainWindow/Window.cpp:950
#, kde-format
msgid "Icons"
msgstr "Ikoner"
#. +> trunk5
#: MainWindow/Window.cpp:958
#, kde-format
msgid "Show Tooltips in Thumbnails Window"
msgstr "Vis verktøytips i minibilde-vinduet"
#. +> trunk5
#: MainWindow/Window.cpp:963
#, fuzzy, kde-format
#| msgctxt "@option:check Startup Settings"
#| msgid "Show filter bar"
msgid "Show filter toolbar"
msgstr "Vis filterlinja"
#. +> trunk5
#: MainWindow/Window.cpp:968
#, fuzzy, kde-format
#| msgctxt "NavigationBarConfigDialog|"
#| msgid "Show search bar"
msgid "Show search bar"
msgstr "Vis søkefelt"
#. +> trunk5
#: MainWindow/Window.cpp:976
#, kde-format
msgid "Run KPhotoAlbum Demo"
msgstr "Kjør KPhotoAlbum-demonstrasjon"
#. +> trunk5
#: MainWindow/Window.cpp:979
#, kde-format
msgid "KPhotoAlbum Feature Status"
msgstr "Funksjonsstatus for KPhotoAlbum"
#. +> trunk5
#: MainWindow/Window.cpp:982
#, kde-format
msgid "Show Demo Videos"
msgstr "Vis demo-filmer"
#. +> trunk5
#: MainWindow/Window.cpp:986
#, kde-format
msgid "Show Exif Info"
msgstr "Vis EXIF-informasjon"
#. +> trunk5
#: MainWindow/Window.cpp:989
#, kde-format
msgid "Recreate Selected Thumbnails"
msgstr "Gjenopprett utvalgte minibilder"
#. +> trunk5
#: MainWindow/Window.cpp:992
#, kde-format
msgid "Use next video thumbnail"
msgstr "Bruk neste video-minibilde"
#. +> trunk5
#: MainWindow/Window.cpp:996
#, kde-format
msgid "Use previous video thumbnail"
msgstr "Bruk forrige video-minibilde"
#. +> trunk5
#: MainWindow/Window.cpp:1022
#, kde-format
msgid "Auto saving...."
msgstr "Autolagrer …"
#. +> trunk5
#: MainWindow/Window.cpp:1025
#, kde-format
msgid "Auto saving.... Done"
msgstr "Autolagrer … ferdig"
#. +> trunk5
#: MainWindow/Window.cpp:1114
#, kde-format
msgid ""
"<p>Could not open given index.xml as provided directory does not exist.<br />"
"%1</p>"
msgstr ""
"<p>Klarte ikke å åpne den oppgitte index.xml-fila siden den oppgitte mappa ikke finnes.<br />"
" %1</p>"
#. +> trunk5
#: MainWindow/Window.cpp:1121
#, kde-format
msgid ""
"<p>Given index file does not exist, do you want to create following?<br />"
"%1/index.xml</p>"
msgstr ""
"<p>Den oppgitte indeksfila finnes ikke, vil du opprette den følgende?<br />"
" %1/index.xml</p>"
#. +> trunk5
#: MainWindow/Window.cpp:1136
#, kde-format
msgid ""
"<p>You have configured a tag for untagged images, but either the tag itself or its category does not exist in the database.</p>"
"<p>Please review your untagged tag setting under <interface>Settings|Configure KPhotoAlbum...|Categories</interface></p>"
msgstr ""
#. +> trunk5
#: MainWindow/Window.cpp:1223
#, kde-format
msgid ""
"<p>The password protection is only a means of allowing your little sister to look in your images, without getting to those embarrassing images from your last party.</p>"
"<p><b>In other words, anyone with access to the index.xml file can easily circumvent this password.</b></p>"
msgstr ""
"<p>Passordbeskyttelsen er bare en måte å la lillesøstra di bla i bildene uten å få tak i de pinlige bildene fra den siste festen du var på.</p>"
"<p><b>Med andre ord, den som kan lese index.xml-fila kan lett komme rundt dette passordet.</b></p>"
msgid "<p>Really enable all message boxes where you previously checked the do-not-show-again check box?</p>"
msgstr "<p>Er det sikkert at du vil slå på igjen alle meldingsbokser der du krysser av for «ikke vis dette igjen»?</p>"
#. +> trunk5
#: MainWindow/Window.cpp:1479
#, kde-format
msgid ""
"<p>KPhotoAlbum hit an internal error (missing plug-in menu in MainWindow::Window::setupPluginMenu). This indicate that you forgot to do a make install. If you did compile KPhotoAlbum yourself, then please run make install. If not, please report this as a bug.</p>"
"<p>KPhotoAlbum will continue execution, but it is not entirely unlikely that it will crash later on due to the missing make install.</p>"
msgstr ""
"<p>KPhotoAlbum støtte på en intern feil (manglende meny for programtillegg i MainWindow::Window::setupPluginMenu). Dette tyder på at du glemte å kjøre en «make install». Hvis du kompilerte KPhotoAlbum selv, så kjør «make install». Hvis du ikke kompilerte selv, så meld fra om denne feilen.</p>"
" "
"<p>KPhotoAlbum vil fortsette å kjøre, men det er ikke usannsynlig at det vil krasje senere på grunn av den manglende «make install».</p>"
" "
#. +> trunk5
#: MainWindow/Window.cpp:1479
#, kde-format
msgid "Internal Error"
msgstr "Intern feil"
#. +> trunk5
#: MainWindow/Window.cpp:1491
#, kde-format
msgid "Successfully shared image(s). Copying location to clipboard..."
msgstr ""
#. +> trunk5
#: MainWindow/Window.cpp:1494
#, fuzzy, kde-format
#| msgid "Successfully read disk."
msgid "Successfully shared image(s)."
msgstr "Disk vellykket lest."
#. +> trunk5
#: MainWindow/Window.cpp:1499
#, kde-format
msgid "Image sharing failed with message: %1"
msgstr ""
#. +> trunk5
-#: MainWindow/Window.cpp:1677
+#: MainWindow/Window.cpp:1644
#, kde-format
msgid "Open List of Files"
msgstr "Åpne filliste"
#. +> trunk5
-#: MainWindow/Window.cpp:1678
+#: MainWindow/Window.cpp:1645
#, kde-format
msgid "You can open a set of files from KPhotoAlbum's image root by listing the files here."
msgstr "Du kan åpne en gruppe filer fra bilderota til KPhotoAlbum ved å liste opp filene her."
#. +> trunk5
-#: MainWindow/Window.cpp:1694
+#: MainWindow/Window.cpp:1661
#, kde-format
msgid "No images matching your input were found."
msgstr "Fant ingen bilder som stemte med det du oppga."
msgid "<p>Image needs to be placed in a sub directory of your photo album, which is rooted at %1. Image path was %2</p>"
msgstr "<p>Bildet må plasseres i en undermappe til fotoalbumet, som har rot ved %1. Stien til bildet var %2</p>"
#. +> trunk5
#: Plugins/PurposeMenu.cpp:53
#, fuzzy, kde-format
msgid "Share"
msgstr "Del"
#. +> trunk5
#: RemoteControl/ConnectionIndicator.cpp:43
#, kde-format
msgid ""
"This icon indicates if KPhotoAlbum is connected to an android device.\n"
"Click on the icon to toggle listening for clients in the local area network.\n"
"If the local area network doesn't allow broadcast packages between the android client and KPhotoAlbum, then right click on the icon and specify the android device's address.\n"
"The android client can be downloaded from google play."
msgstr ""
#. +> trunk5
#: RemoteControl/ConnectionIndicator.cpp:103
#, kde-format
msgid "Android device address: "
msgstr ""
#. +> trunk5
#: RemoteControl/Server.cpp:46
#, kde-format
msgid "Unable to bind to socket"
msgstr ""
#. +> trunk5
#: RemoteControl/Server.cpp:47
#, kde-format
msgid "Unable to listen for remote Android connections. This is likely because you have another KPhotoAlbum application running."
msgstr ""
#. +> trunk5
#: RemoteControl/Server.cpp:81
#, kde-format
msgid "Invalid Version"
msgstr ""
#. +> trunk5
#: RemoteControl/Server.cpp:82
#, kde-format
msgid ""
"Version mismatch between Remote Client and KPhotoAlbum on the desktop.\n"
"Desktop protocol version: %1\n"
"Remote Control protocol version: %2"
msgstr ""
#. +> trunk5
#: Settings/BirthdayPage.cpp:67
#, kde-format
msgid "Filter (Alt+f)"
msgstr ""
#. +> trunk5
#: Settings/BirthdayPage.cpp:104
#, fuzzy, kde-format
#| msgid "Remove bar"
msgid "Remove birthday"
msgstr "Fjern takt"
#. +> trunk5
#: Settings/BirthdayPage.cpp:110
#, kde-format
msgid "Set the date of birth for items (say people) here, and then see their age when viewing the images."
"<p>Can't change the name of category \"%1\" to \"%2\":</p>"
"<p>A category with this name already exists.</p>"
msgstr ""
#. +> trunk5
#: Settings/CategoryPage.cpp:299
#, kde-format
msgid ""
"<p>Can't change the name of category \"%1\" to \"%2\":</p>"
"<p>There's a pending rename action on the category \"%2\". Please save this change first.</p>"
msgstr ""
#. +> trunk5
#: Settings/CategoryPage.cpp:303
#, kde-format
msgid "Unsaved pending renaming action"
msgstr ""
#. +> trunk5
#: Settings/CategoryPage.cpp:335
#, kde-format
msgid ""
"<p>Do you really want to make \"%1\" non-positionable?</p>"
"<p>All areas linked against this category will be deleted!</p>"
msgstr ""
#. +> trunk5
#: Settings/CategoryPage.cpp:374
#, fuzzy, kde-format
msgid "New category"
msgstr "Ny kategori"
#. +> trunk5
#: Settings/CategoryPage.cpp:406
#, fuzzy, kde-format
#| msgid "<p>Really delete category '%1'?</p>"
msgid "<p>Really delete category \"%1\"?</p>"
msgstr "<p>Er det sikkert at du vil slette kategori «%1»?</p>"
#. +> trunk5
#: Settings/CategoryPage.cpp:520
#, kde-format
msgid "<i>Choose a category to edit it</i>"
msgstr ""
#. +> trunk5
#: Settings/DatabaseBackendPage.cpp:37
#, kde-format
msgid "Choose speed over readability for index.xml file"
msgstr "Velg fart framfor lesbarhet for fila index.xml"
#. +> trunk5
#: Settings/DatabaseBackendPage.cpp:41
#, kde-format
msgid "Compress backup file"
msgstr "Komprimer sikkerhetskopi-fila"
#. +> trunk5
#: Settings/DatabaseBackendPage.cpp:45
#, kde-format
msgid "Auto save every:"
msgstr "Autolagre hvert:"
#. +> trunk5
#: Settings/DatabaseBackendPage.cpp:48
#, kde-format
msgid "min."
msgstr "min."
#. +> trunk5
#: Settings/DatabaseBackendPage.cpp:59
#, kde-format
msgid "Number of backups to keep:"
msgstr "Antall sikkerhetskopier som skal beholdes:"
#. +> trunk5
#: Settings/DatabaseBackendPage.cpp:64
#, kde-format
msgid "Infinite"
msgstr "Uendelig"
#. +> trunk5
#: Settings/DatabaseBackendPage.cpp:71
#, kde-format
msgid ""
"<p>KPhotoAlbum is capable of backing up the index.xml file by keeping copies named index.xml~1~ index.xml~2~ etc. and you can use the spinbox to specify the number of backup files to keep. KPhotoAlbum will delete the oldest backup file when it reaches the maximum number of backup files.</p>"
"<p>The index.xml file may grow substantially if you have many images, and in that case it is useful to ask KPhotoAlbum to zip the backup files to preserve disk space.</p>"
msgstr ""
"<p>KPhotoAlbum kan sikkerhetskopiere index.xml-fila ved å beholde kopier med navnene index.xml~1~ index.xml~2~ osv. og tallboksen kan brukes til å oppgi hvor mange sikkerhetskopier som skal beholdes. Når det største antallet filer er nådd vil KPhotoAlbum slette den eldste kopien.</p>"
" "
"<p>index.xml-fila kan bli stor hvis du har mange bilder, og i så fall er er det nyttig å be KPhotoAlbum zip-komprimere sikkerhetskopiene for å spare diskplass.</p>"
#. +> trunk5
#: Settings/DatabaseBackendPage.cpp:81
#, kde-format
msgid "<p>KPhotoAlbum is using a single index.xml file as its <i>data base</i>. With lots of images it may take a long time to read this file. You may cut down this time to approximately half, by checking this check box. The disadvantage is that the index.xml file is less readable by human eyes.</p>"
msgstr "<p>KPhotoAlbum bruker én index.xml-fil som sin <i>database</i>. Med mange bilder kan det ta lang tid å lese denne fila. Tida kan reduseres til omtrent halvparten ved å krysse av her. Ulempen er at index.xml-fila blir vanskeligere å lese for menneskeøyne.</p>"
#. +> trunk5
#: Settings/ExifPage.cpp:41
#, fuzzy, kde-format
#| msgid "EXIF/IPTC info to show in the Viewer"
msgid "Exif/IPTC info to show in the viewer"
msgstr "EXIF/IPTC-informasjon som skal synes i visningen"
#. +> trunk5
#: Settings/ExifPage.cpp:44
#, kde-format
msgid "Exif/IPTC info to show in the Exif dialog"
msgstr ""
#. +> trunk5
#: Settings/ExifPage.cpp:47
#, kde-format
msgid "Character set for image metadata:"
msgstr "Tegnsett for bilde-metadata:"
#. +> trunk5
#: Settings/FileVersionDetectionPage.cpp:37
#, kde-format
msgid "New File Searches"
msgstr "Nye filsøk"
#. +> trunk5
#: Settings/FileVersionDetectionPage.cpp:42
#, kde-format
msgid "Search for new images and videos on startup"
msgstr "Let etter nye bilder og filmer ved oppstart"
#. +> trunk5
#: Settings/FileVersionDetectionPage.cpp:45
#, kde-format
msgid "Ignore file extensions when searching for new images and videos"
msgstr "Ikke ta med fil-etternavn når det letes etter nye bilder og videoer"
#. +> trunk5
#: Settings/FileVersionDetectionPage.cpp:48
#, kde-format
msgid "Skip symbolic links when searching for new images"
msgstr "Hopp over symbolske lenker når det letes etter nye bilder"
#. +> trunk5
#: Settings/FileVersionDetectionPage.cpp:51
#, kde-format
msgid "Do not read RAW files if a matching JPEG/TIFF file exists"
msgstr "Ikke les RAW-filer hvis tilsvarende JPEG/TIFF-fil finnes"
#. +> trunk5
#: Settings/FileVersionDetectionPage.cpp:55
#, kde-format
msgid "Directories to exclude from new file search:"
msgstr "Mapper som ikke skal tas med i søk etter nye filer:"
#. +> trunk5
#: Settings/FileVersionDetectionPage.cpp:62
#, kde-format
msgid "<p>KPhotoAlbum is capable of searching for new images and videos when started, this does, however, take some time, so instead you may wish to manually tell KPhotoAlbum to search for new images using <b>Maintenance->Rescan for new images</b></p>"
msgstr "<p>KPhotoAlbum kan lete etter nye bilder og filmer ved oppstarten, men dette tar litt tid, så kanskje du heller vil be KPhotoAlbum lete etter nye bilder når du vil, ved å bruke <b>Vedlikehold→Let etter nye bilder</b></p>"
#. +> trunk5
#: Settings/FileVersionDetectionPage.cpp:67
#, kde-format
msgid "<p>KPhotoAlbum will normally search new images and videos by their file extension. If this option is set, <em>all</em> files neither in the database nor in the block list will be checked by their Mime type, regardless of their extension. This will take significantly longer than finding files by extension!</p>"
msgstr "<p>Vanligvis vil KPhotoAlbum lete etter nye bilder og videoer etter fil-etternavnet. Hvis dette er valgt, vil <em>alle</em> filer som ikke er i databasen eller blokklista undersøkt etter Mime-type, uansett filnavn, Dette vil ta betraktelig lenger tid enn å finne filer etter fil-etternavn!</p>"
#. +> trunk5
#: Settings/FileVersionDetectionPage.cpp:73
#, kde-format
msgid "<p>KPhotoAlbum attempts to read all image files whether actual files or symbolic links. If you wish to ignore symbolic links, check this option. This is useful if for some reason you have e.g. both the original files and symbolic links to these files within your image directory.</p>"
msgstr "<p>KPhotoAlbum forsøker å lese alle bildefiler enten de er ekte filer eller symbolske lenker. Hvis du vil hoppe over symbolske lenker, så kryss av her. Dette er nyttig hvis du av en eller annen grunn har f.eks. både originalfilene og symbolske lenker til disse filene innen bildemappa.</p>"
#. +> trunk5
#: Settings/FileVersionDetectionPage.cpp:78
#, kde-format
msgid "<p>KPhotoAlbum is capable of reading certain kinds of RAW images. Some cameras store both a RAW image and a matching JPEG or TIFF image. This causes duplicate images to be stored in KPhotoAlbum, which may be undesirable. If this option is checked, KPhotoAlbum will not read RAW files for which matching image files also exist.</p>"
msgstr "<p>KPhotoAlbum kan lese noen typer RAW-bilder. Noen kameraer lagrer både et RAW-bilde og et tilsvarende JPEG eller TIFF-bilde. Dette gjør at det lagres dupliserte bilder i KPhotoAlbum, noe som kan være uønsket. Hvis dette er krysset av vil KPhotoAlbum ikke lese RAW-filer som har tilsvarende bildefiler.</p>"
#. +> trunk5
#: Settings/FileVersionDetectionPage.cpp:84
#, kde-format
msgid "<p>Directories defined here (separated by comma <tt>,</tt>) are skipped when searching for new photos. Thumbnail directories of different tools should be configured here. E.g. <tt>xml,ThumbNails,.thumbs,.thumbnails</tt>.</p>"
msgstr "<p>Disse mappene som er listet her (atskilt med komma <tt>,</tt>) hoppes over når det letes etter nye bilder. Her bør det listes mapper med minibilder for forskjellige verktøy, f.eks. <tt>xml,ThumbNails,.thumbs,.thumbnails</tt>.</p>"
#. +> trunk5
#: Settings/FileVersionDetectionPage.cpp:92
#, kde-format
msgid "File Version Detection Settings"
msgstr "Innstillinger for å finne filversjon"
#. +> trunk5
#: Settings/FileVersionDetectionPage.cpp:96
#, kde-format
msgid "Try to detect multiple versions of files"
msgstr "Prøv å oppdage filer som har flere versjoner"
#. +> trunk5
#: Settings/FileVersionDetectionPage.cpp:99
#, kde-format
msgid "File versions search regexp:"
msgstr "Søkeuttrykk for filversjoner:"
#. +> trunk5
#: Settings/FileVersionDetectionPage.cpp:105
#, kde-format
msgid "Original file replacement text:"
msgstr "Tekst for original fil:"
#. +> trunk5
#: Settings/FileVersionDetectionPage.cpp:111
#, fuzzy, kde-format
#| msgid "Move meta-data (i.e. delete tags from the original):"
msgid "Move meta-data (i.e. delete tags from the original)"
msgstr "Flytt meta-data (dvs. slett tagger fra originalen):"
#. +> trunk5
#: Settings/FileVersionDetectionPage.cpp:114
#, kde-format
msgid "Automatically stack new versions of images"
msgstr "Stable automatisk nye versjoner av bilder"
#. +> trunk5
#: Settings/FileVersionDetectionPage.cpp:117
#, kde-format
msgid "<p>When KPhotoAlbum searches for new files and finds a file that matches the <i>modified file search regexp</i> it is assumed that an original version of the image may exist. The regexp pattern will be replaced with the <i>original file replacement text</i> and if that file exists, all associated metadata (category information, ratings, etc) will be copied or moved from the original file to the new one.</p>"
msgstr "<p>Når KPhotoAlbum leter etter nye filer og finner en fil som stemmer overens med <i>regulært uttrykk for å finne endrede filer</i> så går den ut fra at det kan finnes en opprinnelig versjon av bildet. Strengen som det regulære uttrykket treffer blir erstattet med <i>erstatningstekst for original fil</i> og hvis den filen finnes, så blir alle tilknyttede metadata (kategoriinformasjon, vurderinger osv.) kopiert fra den opprinnelige fila til den nye.</p>"
#. +> trunk5
#: Settings/FileVersionDetectionPage.cpp:124
#, kde-format
msgid ""
"<p>A perl regular expression that should match a modified file. "
"<ul>"
"<li>A dot matches a single character (<tt>\\.</tt> matches a dot)</li>"
" "
"<li>You can use the quantifiers <tt>*</tt>,<tt>+</tt>,<tt>?</tt>, or you can match multiple occurrences of an expression by using curly brackets (e.g. <tt>e{0,1}</tt> matches 0 or 1 occurrences of the character \"e\").</li>"
" "
"<li>You can group parts of the expression using parenthesis.</li>"
" </ul>"
"Example: <tt>-modified\\.(jpg|tiff)</tt> </p>"
msgstr ""
"<p>Et regulært uttrykk som i Perl, som skal passe med en endret fil. "
"<ul> "
"<li>Et punktum passer med ett enkelt tegn (<tt>\\.</tt> passer med et punktum)</li>"
" "
"<li>Du kan bruke kvantisererne <tt>*</tt>, <tt>+</tt>, <tt>?</tt>, eller du kan angi flere forekomster av et uttrykk ved å bruke krøllparenteser (f.eks. <tt>e{0,1}</tt> passer med 0 eller 1 forekomst av bokstaven «e»).</li>"
" "
"<li>Du kan gruppere deler av uttrykket med parenteser.</li>"
" </ul>"
" Eksempel: <tt>endret\\.(jpg|tiff)</tt></p>"
#. +> trunk5
#: Settings/FileVersionDetectionPage.cpp:134
#, kde-format
msgid "<p>A string that is used to replace the match from the <i>File versions search regexp</i>. This can be a semicolon (<tt>;</tt>) separated list. Each string is used to replace the match in the new file's name until an original file is found or we run out of options.</p>"
msgstr "<p>En streng som brukes til å erstatte strengen funnet i <i>Søkeuttrykk for filversjoner</i>. Dette kan være en liste atskilt med semikolon (<tt>;</tt>). Hver streng brukes til å erstatte treffet i navnet til den nye fila inntil en originalfil finnes eller vi slipper opp for muligheter.</p>"
#. +> trunk5
#: Settings/FileVersionDetectionPage.cpp:140
#, kde-format
msgid "<p>The tagging is moved from the original file to the new file. This way only the latest version of an image is tagged.</p>"
msgstr "<p>Merkingen flyttes fra originalfila til den nye fila. På dette måten blir bare den nyeste versjonen av et bilde merket.</p>"
#. +> trunk5
#: Settings/FileVersionDetectionPage.cpp:144
#, kde-format
msgid "<p>If this option is set, new versions of an image are automatically stacked and placed to the top of the stack. This way the new image is shown when the stack is in collapsed state - the default state in KPhotoAlbum.</p>"
msgstr "<p>Hvis dette er valgt blir nye versjoner av et bilde automatisk stablet og lagt på toppen av stabelen. På denne måten blir det nye bildet vist når stabelen er i sammenfoldet tilstand – standard tilstand i KPhotoAlbum.</p>"
#. +> trunk5
#: Settings/FileVersionDetectionPage.cpp:152
#, kde-format
msgctxt "Configure the feature to make a copy of a file first and then open the copied file with an external application"
msgid "Copy File and Open with an External Application"
msgstr "Kopier fila og åpne den med et eksternt program"
#. +> trunk5
#: Settings/FileVersionDetectionPage.cpp:156
#, kde-format
msgid "Copy file search regexp:"
msgstr "Søkeuttrykk for filkopiering:"
#. +> trunk5
#: Settings/FileVersionDetectionPage.cpp:162
#, kde-format
msgid "Copy file replacement text:"
msgstr "Erstatningstekst for kopierte filer:"
#. +> trunk5
#: Settings/FileVersionDetectionPage.cpp:168
#, kde-format
msgid ""
"<p>KPhotoAlbum can make a copy of an image before opening it with an external application. This configuration defines how the new file is named.</p>"
"<p>The regular expression defines the part of the original file name that is replaced with the <i>replacement text</i>. E.g. regexp <i>\"\\.(jpg|png)\"</i> and replacement text <i>\"-mod.\\1\"</i> would copy test.jpg to test-mod.jpg and open the new file in selected application.</p>"
msgstr ""
"<p>KPhotoAlbum kan lage en kopi av et bilde før det åpner det med et eksternt program. Dette oppsettet bestemmer hvordan den nye fila får sitt navn.</p>"
" "
"<p>Det regulære uttrykket definerer hvilken del av det opprinnelige filnavnet som erstattes med <i>erstatningstekst</i>. F.eks. regexp <i>\"\\.(jpg|png)\"</i> og erstatningstekst <i>\"-endr.\\1\"</i> vil kopiere test.jpg til test-endr.jpg og åpne den nye fila i det valgte programmet.</p>"
#. +> trunk5
#: Settings/GeneralPage.cpp:42
#, kde-format
msgid "Loading New Images"
msgstr "Laster inn nye bilder"
#. +> trunk5
#: Settings/GeneralPage.cpp:50
#, kde-format
msgid "Trust image dates:"
msgstr "Stol på bildedatoer:"
#. +> trunk5
#: Settings/GeneralPage.cpp:52
#, kde-format
msgctxt "As in 'always trust image dates'"
msgid "Always"
msgstr "Alltid"
#. +> trunk5
#: Settings/GeneralPage.cpp:53
#, kde-format
msgctxt "As in 'ask whether to trust image dates'"
msgid "Ask"
msgstr "Spør"
#. +> trunk5
#: Settings/GeneralPage.cpp:54
#, kde-format
msgctxt "As in 'never trust image dates'"
msgid "Never"
msgstr "Aldri"
#. +> trunk5
#: Settings/GeneralPage.cpp:61
#, fuzzy, kde-format
#| msgid "Use EXIF orientation information"
msgid "Use Exif orientation information"
msgstr "Bruk orienteringsinformasjon fra EXIF"
#. +> trunk5
#: Settings/GeneralPage.cpp:66
#, fuzzy, kde-format
#| msgid "Edit description"
msgid "Use Exif description"
msgstr "Rediger beskrivelse"
#. +> trunk5
#: Settings/GeneralPage.cpp:70
#, kde-format
msgid "Strip out camera generated default descriptions"
msgstr ""
#. +> trunk5
#: Settings/GeneralPage.cpp:82
#, kde-format
msgid "Use the embedded thumbnail in RAW file or halfsized RAW"
msgstr "Bruk det innebygde minibildet i RAW-fila eller halvstørrelse RAW"
#. +> trunk5
#: Settings/GeneralPage.cpp:86
#, kde-format
msgid "Required size for the thumbnail:"
msgstr "Påkrevet størrelse på minibildet:"
#. +> trunk5
#: Settings/GeneralPage.cpp:100
#, kde-format
msgid "Histogram"
msgstr "Histogram"
#. +> trunk5
#: Settings/GeneralPage.cpp:107
#, fuzzy, kde-format
#| msgid "Show histogram:"
msgid "Show histogram"
msgstr "Vis histogram:"
#. +> trunk5
#: Settings/GeneralPage.cpp:112
#, kde-format
msgid "Use linear scale for histogram"
msgstr ""
#. +> trunk5
#: Settings/GeneralPage.cpp:116
#, kde-format
msgid "Size of histogram columns in date bar:"
msgstr "Størrelse på histogramkolonner i datolinja:"
#. +> trunk5
#: Settings/GeneralPage.cpp:137
#, kde-format
msgid "Show splash screen"
msgstr "Vis velkomstbilde"
#. +> trunk5
#: Settings/GeneralPage.cpp:142
#, kde-format
msgid "Category for virtual albums:"
msgstr "Kategori for virtuelle albumer:"
#. +> trunk5
#: Settings/GeneralPage.cpp:152
#, kde-format
msgid "Listen for Android devices on startup"
msgstr ""
#. +> trunk5
#: Settings/GeneralPage.cpp:160
#, fuzzy, kde-format
#| msgid ""
#| "<p>KPhotoAlbum will try to read the image date from EXIF information in the image. If that fails it will try to get the date from the file's time stamp.</p>"
#| "<p>However, this information will be wrong if the image was scanned in (you want the date the image was taken, not the date of the scan).</p>"
#| "<p>If you only scan images, in contrast to sometimes using a digital camera, you should reply <b>no</b>. If you never scan images, you should reply <b>yes</b>, otherwise reply <b>ask</b>. This will allow you to decide whether the images are from the scanner or the camera, from session to session.</p>"
msgid ""
"<p>KPhotoAlbum will try to read the image date from Exif information in the image. If that fails it will try to get the date from the file's time stamp.</p>"
"<p>However, this information will be wrong if the image was scanned in (you want the date the image was taken, not the date of the scan).</p>"
"<p>If you only scan images, in contrast to sometimes using a digital camera, you should reply <b>no</b>. If you never scan images, you should reply <b>yes</b>, otherwise reply <b>ask</b>. This will allow you to decide whether the images are from the scanner or the camera, from session to session.</p>"
msgstr ""
"<p>KPhotoAlbum vil forsøke å lese bildedata fra EXIF-informasjonen i bildet. Hvis det mislykkes vil det forsøke å hente datoeen fra tidsstempelet på fila.</p>"
"<p>Imidlertid er denne informasjonen feil hvis bildet ble skannet inn (du trenger datoen bildet ble tatt, ikke når det ble skannet).</p>"
"<p>Hvis du bare skanner bilder, i motsetning til å bruke digitalkamera noen ganger, så bør du svare <b>nei</b>. Hvis du aldri skanner bilder bør du svare <b>ja</b>, ellers <b>spør</b>. Da kan du avgjøre om bildet er fra skanneren og kamera, fra økt til økt.</p>"
#. +> trunk5
#: Settings/GeneralPage.cpp:171
#, kde-format
msgid ""
"<p>JPEG images may contain information about rotation. If you have a reason for not using this information to get a default rotation of your images, uncheck this check box.</p>"
"<p>Note: Your digital camera may not write this information into the images at all.</p>"
msgstr ""
"<p>JPEG-bilder kan inneholde informasjon om rotasjon. Ta vekk krysset hvis du har grunn til ikke å bruke denne informasjonen til å hente standardrotasjon for bildene.</p>"
"<p>Merk: Det kan være at digitalkameraet ikke skriver denne informasjonen i bildet i det hele tatt.</p>"
#. +> trunk5
#: Settings/GeneralPage.cpp:177
#, kde-format
msgid "<p>JPEG images may contain a description. Check this checkbox to specify if you want to use this as a default description for your images.</p>"
msgstr "<p>JPEG-bilder kan inneholde en beskrivelse. Kryss av her om du vil bruke denne som standardbeskrivelse for bildene.</p>"
#. +> trunk5
#: Settings/GeneralPage.cpp:182
#, kde-format
msgid ""
"<p>KPhotoAlbum shares plugins with other imaging applications, some of which have the concept of albums. KPhotoAlbum does not have this concept; nevertheless, for certain plugins to function, KPhotoAlbum behaves to the plugin system as if it did.</p>"
"<p>KPhotoAlbum does this by defining the current album to be the current view - that is, all the images the browser offers to display.</p>"
"<p>In addition to the current album, KPhotoAlbum must also be able to give a list of all albums; the list of all albums is defined in the following way:"
"<ul>"
"<li>When KPhotoAlbum's browser displays the content of a category, say all People, then each item in this category will look like an album to the plugin.</li>"
"<li>Otherwise, the category you specify using this option will be used; e.g. if you specify People with this option, then KPhotoAlbum will act as if you had just chosen to display people and then invoke the plugin which needs to know about all albums.</li>"
"</ul>"
"</p>"
"<p>Most users would probably want to specify Events here.</p>"
msgstr ""
"<p>KPhotoAlbum deler programtillegg med andre bildeprogrammer, noen av disse har begrepet «albumer». KPhotoAlbum har ikke dette, men likevel later det som overfor programtilleggene.</p>"
"<p>KPhotoAlbum gjør dette ved å definere gjeldende album som gjeldende visning – dvs. alle bilder som bildeviseren tilbyr seg å vise.</p>"
"<p>I tillegg til gjeldende album må KPhotoAlbum ogsåvære i stand til å oppgi en liste over albumer, og albumer defineres pådenne måten: "
"<ul>"
"<li>Når KPhotoAlbums bildeviser viser innholdet i en kategori, f.sks. Folk, så vil hvert element i denne kategorien se ut som et album for programtillegget.</li>"
"<li>Ellers blir det brukt den kategorien du oppgir med dette valget, dvs. hvis du oppgir Folk med dette valget,så oppfører KPhotoAlbum seg som om du hadde nettop valgt å vise Folk og så kalle opp progamtillegget som trenger å vite om alle albumer.</li>"
" </ul>"
" </p>"
"<p>De fleste brukere vil antakelig ønske å oppgi Hendelser her.</p>"
#. +> trunk5
#: Settings/GeneralPage.cpp:198
#, kde-format
msgid "Show the KPhotoAlbum splash screen on start up"
msgstr "Vis velkomstbildet til KPhotoAlbum ved oppstart"
#. +> trunk5
#: Settings/GeneralPage.cpp:201
#, kde-format
msgid "<p>KPhotoAlbum is capable of showing your images on android devices. KPhotoAlbum will automatically pair with the app from android. This, however, requires that KPhotoAlbum on your desktop is listening for multicast messages. Checking this checkbox will make KPhotoAlbum do so automatically on start up. Alternatively, you can click the connection icon in the status bar to start listening."
msgstr ""
#. +> trunk5
#: Settings/GeneralPage.cpp:207
#, kde-format
msgid ""
"<p>Some cameras automatically store generic comments in each image. These comments can be ignored automatically.</p>"
"<p>Enter the comments that you want to ignore in the input field, one per line. Be sure to add the exact comment, including all whitespace.</p>"
msgstr ""
#. +> trunk5
#: Settings/PluginsPage.cpp:42
#, kde-format
msgid "Choose Plugins to load:"
msgstr "Vekg programtillegg som skal lastes inn:"
#. +> trunk5
#: Settings/PluginsPage.cpp:48
#, kde-format
msgid "Delay loading plugins until the plugin menu is opened"
msgstr "Utsett lasting av programtillegg til programtillegg-menyen er åpnet"
#. +> trunk5
#: Settings/SettingsData.cpp:221
#, fuzzy, kde-format
#| msgid "When reading time information of images, their EXIF info is used. Exif info may, however, not be supported by your KPhotoAlbum installation, or no valid information may be in the file. As a backup, KPhotoAlbum may use the timestamp of the image - this may, however, not be valid in case the image is scanned in. So the question is, should KPhotoAlbum trust the time stamp on your images?"
msgid "When reading time information of images, their Exif info is used. Exif info may, however, not be supported by your KPhotoAlbum installation, or no valid information may be in the file. As a backup, KPhotoAlbum may use the timestamp of the image - this may, however, not be valid in case the image is scanned in. So the question is, should KPhotoAlbum trust the time stamp on your images?"
msgstr "Når tidsinformasjon leses fra bildene brukes bildenes EXIF-informasjon. Imidlertid kan det hende at denne installasjonen ikke støtter EXIF-informasjon, eller det er kanskje ingen gyldig informasjon i fila. KPhotoAlbum kan falle tilbake på bildets tidsstempel – men dette er kanskje ikke gyldig hvis bildet er skannet inn. Spørsmålet er, skal KPhotoAlbum stole på tidsstemplene på bildene?"
msgid "<para>Cannot rename group \"%1\" to \"%2\": \"%2\" already exists in category \"%3\"</para>"
msgstr ""
#. +> trunk5
#: Settings/TagGroupsPage.cpp:541
#, kde-kuit-format
msgctxt "@info"
msgid ""
"<para>Really delete group \"%1\"?</para>"
"<para>Sub-categories of this group will be moved to the super category of \"%1\" (\"%2\").<nl/>"
" All other memberships of the sub-categories will stay intact.</para>"
msgstr ""
#. +> trunk5
#: Settings/TagGroupsPage.cpp:547
#, fuzzy, kde-kuit-format
#| msgid "Really delete group %1?"
msgctxt "@info"
msgid "<para>Really delete group \"%1\"?</para>"
msgstr "Er du sikker på at du vil slette gruppe %1?"
#. +> trunk5
#: Settings/TagGroupsPage.cpp:552
#, fuzzy, kde-format
#| msgid "Delete Group"
msgctxt "@title:window"
msgid "Delete Group"
msgstr "Slett gruppe"
#. +> trunk5
#: Settings/TagGroupsPage.cpp:730
#, fuzzy, kde-format
#| msgid "Rename %1"
msgctxt "@action:inmenu"
msgid "Rename \"%1\""
msgstr "Omnavn %1"
#. +> trunk5
#: Settings/TagGroupsPage.cpp:732
#, fuzzy, kde-format
#| msgid "Delete %1"
msgctxt "@action:inmenu"
msgid "Delete \"%1\""
msgstr "Fjern %1"
#. +> trunk5
#: Settings/TagGroupsPage.cpp:743
#, fuzzy, kde-format
#| msgid "New Name"
msgctxt "@title:window"
msgid "New Tag Name"
msgstr "Nytt navn"
#. +> trunk5
#: Settings/TagGroupsPage.cpp:744
#, fuzzy, kde-format
#| msgid "Tag name"
msgctxt "@label:textbox"
msgid "Tag name:"
msgstr "Etikettnavn"
#. +> trunk5
#: Settings/TagGroupsPage.cpp:793
#, fuzzy, kde-kuit-format
#| msgid ""
#| "<p>Do you really want to delete \"%1\"?<br/>"
#| "Deleting the item will remove any information about it from any image containing the item.</p>"
msgctxt "@info"
msgid ""
"<para>Do you really want to delete \"%1\"?</para>"
"<para>Deleting the item will remove any information about it from any image containing the item.</para>"
msgstr ""
"<p>Er du sikker på at du vil slette «%1»?<br/>"
" Om dette slettes blir all informasjon om det slettet fra alle bilder som inneholder elementet.</p>"
#. +> trunk5
#: Settings/TagGroupsPage.cpp:797
#, fuzzy, kde-format
#| msgid "Really Delete %1?"
msgctxt "@title:window"
msgid "Really delete %1?"
msgstr "Sikkert at du vil slette %1?"
#. +> trunk5
#: Settings/ThumbnailsPage.cpp:38
#, kde-format
msgid "Tooltip preview image size:"
msgstr "Bildestørrelse på verktøytipsets forhåndsvisning:"
#. +> trunk5
#: Settings/ThumbnailsPage.cpp:42
#, kde-format
msgid "No Image Preview"
msgstr "Ingen forhåndsvisning"
#. +> trunk5
#: Settings/ThumbnailsPage.cpp:48
#, kde-format
msgid "Thumbnail image size:"
msgstr "Størrelse på småbildene:"
#. +> trunk5
#: Settings/ThumbnailsPage.cpp:57
#, fuzzy, kde-format
#| msgid "Build Thumbnails"
msgid "Build thumbnails on demand"
msgstr "Bygg miniatyrbilder"
#. +> trunk5
#: Settings/ThumbnailsPage.cpp:62
#, fuzzy, kde-format
#| msgid "Thumbnail table cells aspect ratio"
msgid "Thumbnail table cells aspect ratio:"
msgstr "Høyde/bredde-forhold for minibilder i tabellceller"
#. +> trunk5
#: Settings/ThumbnailsPage.cpp:64
#, kde-format
msgid "1:1"
msgstr "1:1"
#. +> trunk5
#: Settings/ThumbnailsPage.cpp:64
#, kde-format
msgid "4:3"
msgstr "4:3"
#. +> trunk5
#: Settings/ThumbnailsPage.cpp:65
#, kde-format
msgid "3:2"
msgstr "3:2"
#. +> trunk5
#: Settings/ThumbnailsPage.cpp:65
#, kde-format
msgid "16:9"
msgstr "16:9"
#. +> trunk5
#: Settings/ThumbnailsPage.cpp:65
#, kde-format
msgid "3:4"
msgstr "3:4"
#. +> trunk5
#: Settings/ThumbnailsPage.cpp:65
#, kde-format
msgid "2:3"
msgstr "2:3"
#. +> trunk5
#: Settings/ThumbnailsPage.cpp:65
#, kde-format
msgid "9:16"
msgstr "9:16"
#. +> trunk5
#: Settings/ThumbnailsPage.cpp:71
#, fuzzy, kde-format
#| msgid "Space around cells"
msgid "Space around cells:"
msgstr "Plass rundt cellene"
#. +> trunk5
#: Settings/ThumbnailsPage.cpp:79
#, fuzzy, kde-format
msgid "Background color:"
msgstr "Bakgrunnsfarge:"
#. +> trunk5
#: Settings/ThumbnailsPage.cpp:86
#, kde-format
msgid "Display grid around thumbnails"
msgstr "Vis rutenett rundt miniatyrbilder"
#. +> trunk5
#: Settings/ThumbnailsPage.cpp:91
#, kde-format
msgid "Display labels in thumbnail view"
msgstr "Vis etiketter i minibildevisning"
#. +> trunk5
#: Settings/ThumbnailsPage.cpp:96
#, kde-format
msgid "Display categories in thumbnail view"
msgstr "Vis kategorier i minibildevisning"
#. +> trunk5
#: Settings/ThumbnailsPage.cpp:101
#, kde-format
msgid "Threshold for automatic thumbnail view: "
msgstr "Terskel for automatisk minibilde-visning: "
#. +> trunk5
#: Settings/ThumbnailsPage.cpp:105
#, kde-format
msgctxt "Describing: 'ThumbnailView will not be automatically shown'"
msgid "Disabled"
msgstr "Slått av"
#. +> trunk5
#: Settings/ThumbnailsPage.cpp:115
#, kde-format
msgid "<p>If you select <b>Settings -> Show Tooltips</b> in the thumbnail view, then you will see a small tool tip window displaying information about the thumbnails. This window includes a small preview image. This option configures the image size.</p>"
msgstr "<p>Hvis du velger <b>Innstillinger→Vis verktøytips</b> i minibildevisning, så får du se et lite verktøytips-vindu som viser informasjon om minibildene. Dette vinduet inneholder et lite forhåndsvisningsbilde. Dette valget setter opp størrelsen på bildet.</p>"
#. +> trunk5
#: Settings/ThumbnailsPage.cpp:121
#, kde-format
msgid "<p>Thumbnail image size. Changing the thumbnail size here triggers a rebuild of the thumbnail database.</p>"
msgstr ""
#. +> trunk5
#: Settings/ThumbnailsPage.cpp:125
#, kde-format
msgid ""
"<p>If this is set, thumbnails are built on demand. As you browse your image database, only those thumbnails that are needed are actually built. This means that when you change the thumbnail size, KPhotoAlbum will remain responsive even if you have lots of images.</p>"
"<p>If this is not set, KPhotoAlbum will always build the thumbnails for all images as soon as possible. This means that when new images are found, KPhotoAlbum will immediately build thumbnails for them and you won't have a delay later while browsing.</p>"
msgstr ""
#. +> trunk5
#: Settings/ThumbnailsPage.cpp:134
#, kde-format
msgid "<p>Choose what aspect ratio the cells holding thumbnails should have.</p>"
msgstr "<p>Velg høyde/bredde-forhold på cellene som inneholder minibilder.</p>"
#. +> trunk5
#: Settings/ThumbnailsPage.cpp:137
#, kde-format
msgid "<p>How thick the cell padding should be.</p>"
msgstr "<p>Hvor tykk cellepolstringen skal være.</p>"
#. +> trunk5
#: Settings/ThumbnailsPage.cpp:140
#, kde-format
msgid "<p>Background color to use in the thumbnail viewer</p>"
msgstr "<p>Bakgrunnsfarge som skal brukes i minibildevisningen</p>"
#. +> trunk5
#: Settings/ThumbnailsPage.cpp:144
#, kde-format
msgid "<p>If you want to see grid around your thumbnail images, select this option.</p>"
msgstr "<p>Velg dette hvis du vil se rutenettet rundt minibildene.</p>"
#. +> trunk5
#: Settings/ThumbnailsPage.cpp:148
#, kde-format
msgid "<p>Checking this option will show the base name for the file under thumbnails in the thumbnail view.</p>"
msgstr "<p>Kryss av her for å se base-navnet for fila under minibildene i minibildebvisningen.</p>"
#. +> trunk5
#: Settings/ThumbnailsPage.cpp:152
#, kde-format
msgid "<p>Checking this option will show the Categories for the file under thumbnails in the thumbnail view</p>"
msgstr "<p>Kryss av her for å vise kategorien for fila under minibildet i minibildevisningen.</p>"
#. +> trunk5
#: Settings/ThumbnailsPage.cpp:156
#, kde-format
msgid "<p>When you are browsing, and the count gets below the value specified here, the thumbnails will be shown automatically. The alternative is to continue showing the browser until you press <i>Show Images</i></p>"
msgstr "<p>Når du blar, og antallet blir mindre enn det som er oppgitt her, så blir minibildene vist automatisk. Alternativet er å fortsette å vise blaingen til du trykker <i>Vis bilder</i></p>"
#. +> trunk5
#: Settings/UntaggedGroupBox.cpp:35
#, kde-format
msgid "If a tag is selected here, it will be added to new (untagged) images automatically, so that they can be easily found. It will be removed as soon as the image has been annotated."
msgstr ""
#. +> trunk5
#: Settings/UntaggedGroupBox.cpp:56
#, kde-format
msgid "Show the untagged images tag as a normal tag"
msgstr ""
#. +> trunk5
#: Settings/UntaggedGroupBox.cpp:65
#, kde-format
msgid "None Selected"
msgstr "Ingen er valgt"
#. +> trunk5
#: Settings/UntaggedGroupBox.cpp:123
#, fuzzy, kde-format
#| msgid "New %1 tablet added"
msgid "New tag added"
msgstr "Ny %1 tegneplate tilkoblet"
#. +> trunk5
#: Settings/UntaggedGroupBox.cpp:124
#, kde-format
msgid ""
"<p>The new tag \"%1\" has been added to the category \"%2\" and will be used for untagged images now.</p>"
"<p>Please save now, so that this tag will be stored in the database. Otherwise, it will be lost, and you will get an error about this tag being not present on the next start.</p>"
msgstr ""
#. +> trunk5
#: Settings/ViewerPage.cpp:35
#, kde-format
msgid "Running Slide Show From Thumbnail View"
msgstr "Kjører lysbildevisning fra minibildevisningen"
#. +> trunk5
#: Settings/ViewerPage.cpp:38
#, kde-format
msgid "Viewing Images and Videos From Thumbnail View"
msgstr "Viser bilder og filmer fra minibildevisningen"
#. +> trunk5
#: Settings/ViewerPage.cpp:44
#, kde-format
msgid "Slideshow interval:"
msgstr "Lysbildeintervall:"
#. +> trunk5
#: Settings/ViewerPage.cpp:50
#, kde-format
msgid " sec"
msgstr " sek"
#. +> trunk5
#: Settings/ViewerPage.cpp:53
#, kde-format
msgid "Image cache:"
msgstr "Bildemellomlager:"
#. +> trunk5
#: Settings/ViewerPage.cpp:59
#, kde-format
msgid " Mbytes"
msgstr " Mbyte"
#. +> trunk5
#: Settings/ViewerPage.cpp:65
#, kde-format
msgid "Standard size in viewer:"
msgstr "Standardstørrelse i visning:"
#. +> trunk5
#: Settings/ViewerPage.cpp:67
#, kde-format
msgid "Full Viewer Size"
msgstr "Full størrelse"
#. +> trunk5
#: Settings/ViewerPage.cpp:67
#, kde-format
msgid "Natural Image Size"
msgstr "Naturlig bildestørrelse"
#. +> trunk5
#: Settings/ViewerPage.cpp:67
#, kde-format
msgid "Natural Image Size If Possible"
msgstr "Naturlig bildestørrelse hvis mulig"
#. +> trunk5
#: Settings/ViewerPage.cpp:72
#, kde-format
msgid ""
"<p>Set the standard size for images to be displayed in the viewer.</p>"
" "
"<p><b>Full Viewer Size</b> indicates that the image will be stretched or shrunk to fill the viewer window.</p>"
" "
"<p><b>Natural Image Size</b> indicates that the image will be displayed pixel for pixel.</p>"
" "
"<p><b>Natural Image Size If Possible</b> indicates that the image will be displayed pixel for pixel if it would fit the window, otherwise it will be shrunk to fit the viewer.</p>"
msgstr ""
"<p>Still inn standardstørrelse for bilder i framviseren.</p>"
" "
"<p><b>Full størrelse</b> angir at bildet blir forstørret eller forminsket til å fylle visningsvinduet. "
"<p><b>Naturlig bildestørrelse</b> angir at bildet vises piksel for piksel.</p>"
"<b>Naturlig bildestørrelse hvis mulig</b> angir at bildet blir vist piksel for piksel hvis det passer i vinduet, ellers blir det forminsket til det passer i visningsvinduet.</p>"
#. +> trunk5
#: Settings/ViewerPage.cpp:79
#, fuzzy, kde-format
#| msgid "Scaling Algorithm"
msgid "Scaling algorithm:"
msgstr "Skaleringsalgoritme"
#. +> trunk5
#: Settings/ViewerPage.cpp:81
#, kde-format
msgid "Fastest"
msgstr "Raskest"
#. +> trunk5
#: Settings/ViewerPage.cpp:81
#, kde-format
msgid "Best"
msgstr "Best"
#. +> trunk5
#: Settings/ViewerPage.cpp:86
#, kde-format
msgid "<p>When displaying images, KPhotoAlbum normally performs smooth scaling of the image. If this option is not set, KPhotoAlbum will use a faster but less smooth scaling method.</p>"
msgstr "<p>KPhotoAlbum bruker normalt jevn bildeskalering når bilder vises. Hvis dette ikke er slått på vil KPhotoAlbum bruke en raskere men mer ujevn skaleringsmetode.</p>"
#. +> trunk5
#: Settings/ViewerSizeConfig.cpp:32
#, kde-format
msgid "Launch in full screen"
msgstr "Start i fullskjerm"
#. +> trunk5
#: Settings/ViewerSizeConfig.cpp:39
#, kde-format
msgid "Size:"
msgstr "Størrelse:"
#. +> trunk5
#: ThumbnailView/Delegate.cpp:248
#, kde-format
msgctxt "No video length could be determined, so we just display 'video' instead of the video length."
msgid "video"
msgstr "video"
#. +> trunk5
#: ThumbnailView/FilterWidget.cpp:33
#, fuzzy, kde-format
#| msgid "no filter"
msgctxt "The action enables/disables filtering of images in the thumbnail view."
msgid "Toggle filter"
msgstr "uten filter"
#. +> trunk5
#: ThumbnailView/FilterWidget.cpp:35
#, fuzzy, kde-kuit-format
#| msgctxt "@info"
#| msgid "Press <shortcut>Escape</shortcut> to exit fullscreen mode."
msgid "Press <shortcut>Escape</shortcut> to clear filter."
msgstr "Trykk <shortcut>Escape</shortcut> for å gå ut av fullskjermmodus."
#. +> trunk5
#: ThumbnailView/FilterWidget.cpp:42
#, fuzzy, kde-format
#| msgctxt "@action:inmenu"
#| msgid "Filter by Rating"
msgid "Filter view by rating: %1 star"
msgid_plural "Filter view by rating: %1 stars"
msgstr[0] "Filtrer etter vurdering"
msgstr[1] "Filtrer etter vurdering"
#. +> trunk5
#: ThumbnailView/FilterWidget.cpp:72
#, fuzzy, kde-format
#| msgctxt "@title:window"
#| msgid "Filter: %1"
msgctxt "The label gives a textual description of the active filter"
msgid "Filter: %1"
msgstr "Filter: %1"
#. +> trunk5
#: ThumbnailView/FilterWidget.cpp:95
#, kde-kuit-format
msgid "Tip: Use <shortcut>Alt+Shift+<placeholder>A-Z</placeholder></shortcut> to toggle a filter for that token."
msgstr ""
#. +> trunk5
#: ThumbnailView/GridResizeSlider.cpp:151
#, fuzzy, kde-format
#| msgid "Really resize grid, it will result in all thumbnails being regenerated?"
msgid "Really resize the stored thumbnail size? It will result in all thumbnails being regenerated!"
msgstr "Sikkert at rutenettet skal endre størrelse, da vil alle minibilder bli laget på nytt?"
#. +> trunk5
#: ThumbnailView/GridResizeSlider.cpp:153
#, kde-format
msgid "Really resize the thumbnails?"
msgstr ""
#. +> trunk5
#: ThumbnailView/ThumbnailDND.cpp:101
#, kde-format
msgid ""
"<p><b>Really reorder thumbnails?</b></p>"
"<p>By dragging images around in the thumbnail viewer, you actually reorder them. This is very useful where you do not know the exact date for the images. On the other hand, if the images have valid timestamps, you should use <b>Maintenance -> Sort All By Date and Time</b> or <b>View -> Sort Selected By Date and Time</b>.</p>"
msgstr ""
"<p><b>Er det sikkert at du vil bytte rekkefølge på minibildene?</b></p>"
"<p> Når du drar bilder omkring i minibildeviseren gir du dem ny rekkefølge. Dette er svært nyttig når du ikke vet den nøyaktige datoen for bildene. Men hvis bildene har gyldige tidsstempler, så bør du bruke <b>Vedlikehold→Sorter alle på dato og tid</b> eller <b>Bilder→Sorter utvalgte på dato og tid</b>.</p>"
#. +> trunk5
#: ThumbnailView/ThumbnailDND.cpp:108
#, kde-format
msgid "Reorder Thumbnails"
msgstr "Endre rekkefølge på minibilder"
#. i18n: ectx: @info:tipoftheday
#. +> trunk5
#: tips:2
#, kde-format
msgid ""
"<p>On KPhotoAlbum's home page <a href=\"http://www.kphotoalbum.org/\">www.kphotoalbum.org</a> you may see a few videos featuring a number of\n"
"different KPhotoAlbum features.</p>"
"\n"
msgstr ""
"<p>På nettsida til KPhotoAlbum <a href=\"http://www.kphotoalbum.org/\">http://www.kphotoalbum.org</a> kan du se noen videoer som viser\n"
" en del av egenskapene til KPhotoAlbum.</p>"
"\n"
#. i18n: ectx: @info:tipoftheday
#. +> trunk5
#: tips:9
#, kde-format
msgid ""
"<p>KPhotoAlbum's Handbook is available from Help menu. <a href=\"http://docs.kde.org/development/en/extragear-graphics/kphotoalbum/index.html\">Online</a> and <a href=\"http://docs.kde.org/development/en/extragear-graphics/kphotoalbum/kphotoalbum.pdf\">PDF</a> versions are available at <a href=\"http://docs.kde.org\">KDE documentation site</a>.</p>"
"\n"
msgstr ""
"<p>Håndboka for KPhotoAlbum kan finnes fra Hjelp-menyen. <a href=\"http://docs.kde.org/development/extragear-graphics/kphotoalbum/index.html\">Versjoner på nettet</a>og <a href=\"http://docs.kde.org/development/en/extragear-graphics/kphotoalbum/kphotoalbum.pdf\">PDF-utgaver</a> kan finnes på nettstedet for <a href=\"http://docskdeorg\">KDE-dokumentasjon</a>.</p>"
" \n"
#. i18n: ectx: @info:tipoftheday
#. +> trunk5
#: tips:15
#, fuzzy, kde-format
#| msgid ""
#| "<p>It is possible to create new categories - that are alternatives\n"
#| "to <b>People</b>, <b>Places</b>, and <b>Events</b> - in the annotation\n"
#| "dialog. \n"
#| "To add new categories or remove existing ones, go to the <b>Settings->Configure KPhotoAlbum</b> dialog, and choose\n"
#| "<b>Categories</b> in the side bar.</p>"
#| "\n"
msgid ""
"<p>It is possible to create new categories - that are alternatives\n"
"to <resource>People</resource>, <resource>Places</resource>, and <resource>Events</resource> - in the annotation\n"
"dialog.\n"
"To add new categories or remove existing ones, go to the <interface>Settings|Configure KPhotoAlbum...</interface> dialog, and choose\n"
"<interface>Categories</interface> in the side bar.</p>"
"\n"
msgstr ""
"<p>Det er mulig å opprette nye kategorier – som er alternativer\n"
"til <b>Folk</b>, <b>Steder</b> og <b>Hendelser</b> – i merknads-\n"
"dialogen.\n"
"For å legge inn nye kategorier eller slette gamle kan du gå til dialogen\n"
"<b>Innstillinger→Sett opp KPhotoAlbum</b> og velge <b>Kategorier</b>\n"
"i sidestolpen.</p>"
"\n"
#. i18n: ectx: @info:tipoftheday
#. +> trunk5
#: tips:25
#, fuzzy, kde-format
#| msgid ""
#| "<p>You may rename or delete a person, location, keyword or similar by\n"
#| "right-clicking on the item in the image property dialog.</p>"
#| "\n"
msgid ""
"<p>You may rename or delete a tag (i.e. a person, location, keyword or similar) by\n"
"right-clicking on the item in the image property dialog.</p>"
"\n"
msgstr ""
"<p>Du kan endre navn på eller slette en person, et sted, nøkkelord\n"
"e.l. ved å høyre-klikke på elementet i egenskapsdialogen for bildet.</p>"
"\n"
#. i18n: ectx: @info:tipoftheday
#. +> trunk5
#: tips:32
#, kde-format
msgid ""
"<p>When generating HTML you must specify a base directory for\n"
"the images. Here you can specify any protocol supported by KDE, like ftp or\n"
"fish.</p>"
"\n"
"<p>Examples:\n"
"<ul>\n"
" "
"<li> ftp://someserver/my-upload-area/images (upload using FTP)\n"
" "
"<li> fish://someserver/home/foo/images (upload using ssh)\n"
" "
"<li> smb://someserver/c/images (upload to a Windows share)\n"
"</ul>"
"\n"
"</p>"
"\n"
msgstr ""
"<p>Når du lager HTML må du oppgi en rotmappe for bilder.\n"
"Her kan du bruke enhver protokoll som KDE støtter, \n"
" slik som ftp eller fish.</p>"
"\n"
"<p>Eksempler:\n"
"<ul>\n"
"<li> ftp://entjener/min-opplaste-mappe/bilder (opplasting med FTP)\n"
"<li> fish://entjener/home/foo/bilder (opplasting med ssh)\n"
"<li> smb://enwintjener/c/bilder (opplasting til en Windows share)\n"
"</ul>"
"\n"
"</p>"
"\n"
#. i18n: ectx: @info:tipoftheday
#. +> trunk5
#: tips:47
#, kde-format
msgid ""
"<p>New images are automatically marked as <emphasis>untagged</emphasis>.</br>"
"\n"
"You can easily search for these images from main window by clicking the appropriate icon.</p>"
"\n"
"<p>\n"
"Once you are done tagging an image just click <interface>Done</interface> and the\n"
"<emphasis>untagged</emphasis> flag is automatically removed. On the other hand, the\n"
"<interface>Continue Later</interface> button finishes the tagging but leaves the\n"
"<emphasis>untagged</emphasis> flag intact.</p>"
"\n"
msgstr ""
#. i18n: ectx: @info:tipoftheday
#. +> trunk5
#: tips:59
#, fuzzy, kde-format
#| msgid ""
#| "<p>You can reorder images on your hard disk after having loaded them into\n"
#| "KPhotoAlbum - KPhotoAlbum will still remember them, as it calculates checksums for\n"
#| "the images.</p>"
#| "\n"
msgid ""
"<p>You can reorder images on your hard disk after having loaded them into\n"
"KPhotoAlbum. KPhotoAlbum will still remember them, as it calculates checksums for\n"
"the images.</p>"
"\n"
msgstr ""
"<p>Du kan omordne bilder på harddisken etter at du har lastet dem inn i\n"
"KPhotoAlbum – KPhotoAlbum husker dem likevel, fordi det beregner en \n"
"sjekksum for bildene.</p>"
"\n"
#. i18n: ectx: @info:tipoftheday
#. +> trunk5
#: tips:67
#, kde-format
msgid ""
"<p>It is possible to associate images with categories.</p>"
"\n"
"<p>That way when browsing, say people, you may get a small icon for each person with\n"
"e.g. the person's face.</p>"
"\n"
"<p>To specify an icon for a person, load the person in the viewer, zoom to\n"
"the part which you want to make into an icon, and choose\n"
"<interface>Show Category Editor</interface>. This will bring up a dialog where you can\n"
"find the person, and set the image.\n"
"</p>"
"\n"
msgstr ""
#. i18n: ectx: @info:tipoftheday
#. +> trunk5
#: tips:80
#, kde-format
msgid ""
"<p>You may close the image annotation dialog (the one where you specify\n"
"people, places, etc. for the images) by pressing Ctrl+Enter.\n"
"</p>"
"\n"
msgstr ""
"<p>Du kan lukke merknadsdialogen (der du oppgir folk, steder osv. for\n"
"bildene) ved å trykke CTRL+ENTER.\n"
"</p>"
"\n"
#. i18n: ectx: @info:tipoftheday
#. +> trunk5
#: tips:88
#, kde-format
msgid ""
"<p>To hear more about latest changes in KPhotoAlbum and to get help in using and developing KPhotoAlbum, you are welcome to join the KPhotoAlbum mailing list at <a href=\"http://mail.kdab.com/mailman/listinfo/kphotoalbum\">http://mail.kdab.com/mailman/listinfo/kphotoalbum</a>.</p>"
"\n"
msgstr ""
"<p>Meld deg gjerne på e-postlista for KPhotoAlbum på <a href=\"http://mail.kdab.com/mailman/listinfo/kphotoalbum\">http://mail.kdab.com/mailman/listinfo/kphotoalbum</a> for å høre mer om de nyeste endringene i KPhotoAlbum og få hjelp til å bruke og utvikle det.</p>"
" \n"
#. i18n: ectx: @info:tipoftheday
#. +> trunk5
#: tips:94
#, kde-format
msgid ""
"<p>To discuss KPhotoAlbum with other users and developers and ask any questions that come into your mind, feel free to join our IRC channel <b>#kphotoalbum@freenode</b> or <a href=\"http://webchat.freenode.net/?channels=kphotoalbum\">http://webchat.freenode.net/?channels=kphotoalbum</a></p>"
"\n"
msgstr ""
"<p>Bli gjerne med i vår IRC-kanal <b>#photoalbum@freenode</b> eller <a href=\"http://webchat.freenode.net/?channels=kphotoalbum\">http://webchat.freenode.net/?channels=kphotoalbum</a> for å drøfte KPhotoAlbium med andre brukere og utviklere og spørre om hva som helst du kommer på.</p>"
" \n"
#. i18n: ectx: @info:tipoftheday
#. +> trunk5
#: tips:100
#, fuzzy, kde-format
#| msgid ""
#| "<p>You may reorder images by dragging and dropping one image onto\n"
#| "another. If you drop it on the left edge, it will end up in front of\n"
#| "the other, if you drop it on the right edge it will be inserted behind.</p>"
#| "\n"
#| "<p align=\"right\">-- Tip contributed by Eivind Kjorstad</p>"
#| "\n"
msgid ""
"<p>You may reorder images by dragging and dropping one image onto\n"
"another.</p>"
"\n"
"<p>If you drop it on the left edge, it will end up in front of\n"
"the other, if you drop it on the right edge it will be inserted behind.</p>"
"\n"
"<p align=\"right\">-- Tip contributed by Eivind Kjorstad</p>"
"\n"
msgstr ""
"<p>Du kan endre rekkefølge på bilder ved å dra og slippe et bilde på\n"
"et annet. Hvis du slipper det på venstre kant, kommer det foran det andre,\n"
"og hvis du slipper det på høyre kant blir det satt inn bak.</p>"
"\n"
"<p align=\"right\">-- tipsbidrag fra Eivind Kjørstad</p>"
"\n"
#. i18n: ectx: @info:tipoftheday
#. +> trunk5
#: tips:110
#, fuzzy, kde-format
#| msgid ""
#| "<p>\n"
#| "On the thumbnail view, you can resize the grid to your needs just by clicking \n"
#| "the middle mouse button and dragging around. On most systems you can emulate \n"
#| "the middle mouse button by left and right clicking at the same time. \n"
#| "</p>"
#| "\n"
#| "<p align=\"right\">-- Tip contributed by Rafael Beccar</p>"
#| "\n"
msgid ""
"<p>\n"
"On the thumbnail view, you can resize the grid to your needs just by clicking\n"
"the middle mouse button and dragging around. On most systems you can emulate\n"
"the middle mouse button by left and right clicking at the same time.\n"
"</p>"
"\n"
"<p align=\"right\">-- Tip contributed by Rafael Beccar</p>"
"\n"
msgstr ""
"<p>\n"
"På minibildevisningen kan du endre størrelse på rutenettet slik du vil ved å\n"
"trykke midre museknapp og trekke omkring. På de fleste systemer kan du \n"
"emulere midtknappen ved å trykke høyre og venstre knapp samtidig.\n"
"</p>"
"\n"
"<p align=\"right\">-- tipsbidrag fra Rafael Beccar</p>"
"\n"
#. i18n: ectx: @info:tipoftheday
#. +> trunk5
#: tips:121
#, kde-format
msgid ""
"<p>You can rate images using the numbers from 0 to 5 on the keyboard whilst in\n"
"thumbnail view or the image viewer. In the annotation dialog, you can rate\n"
"images by selecting the appropriate star rating.</p>"
"\n"
msgstr ""
"<p>Du kan vurdere bilder med tall fra 0 til 5 på tastaturet i minibildevisning\n"
"eller bildevisning. I merknadsdialogen kan du gi vurdering ved å velge den \n"
"passende stjernevurderingen.</p>"
" \n"
#. i18n: ectx: @info:tipoftheday
#. +> trunk5
#: tips:130
#, fuzzy, kde-format
#| msgid ""
#| "<p>Sometimes it is useful to group several related images into an image stack.\n"
#| "You can merge several images into a stack by first selecting them on Thumbnail\n"
#| "View and then pressing <tt>Ctrl+3</tt> or selecting <tt>Merge Images into a\n"
#| "Stack</tt> from menu.</p>"
#| "\n"
msgid ""
"<p>Sometimes it is useful to group several related images into an image stack.\n"
"You can merge several images into a stack by first selecting them on Thumbnail\n"
"View and then pressing <shortcut>Ctrl+3</shortcut> or selecting <interface>Merge Images into a\n"
"Stack</interface> from menu.</p>"
"\n"
msgstr ""
"<p>Noen ganger er det nyttig å gruppere flere liknende bilder til en bildestabel. \n"
"Du kan slå sammen flere bilder til en stabel ved å først markere dem på Småbildevisning\n"
"og så trykke <tt>Ctrl+3</tt> eller velge <tt>Flett bilder sammen til en stakk</tt> fra menyen.</p>"
" \n"
#. i18n: ectx: @info:tipoftheday
#. +> trunk5
#: tips:139
#, fuzzy, kde-format
#| msgid ""
#| "<p>When searching for new images, KPhotoAlbum can automatically put new versions\n"
#| "of images into stacks by looking at their filenames. To configure this feature,\n"
#| "choose \"Configure KPhotoalbum...\" from the Settings menu and set appropriate\n"
#| "values in the \"File Searching & Versions\" tab.</p>"
#| "\n"
#| "<p>\n"
#| "<ul>\n"
#| "<li>Enable the checkbox \"Try to detect multiple versions of files\"</li>"
#| "\n"
#| "<li>Enter a regular expression for your modified files:<br/>"
#| "<tt>^(.*)-adjusted\\.(.*)</tt></li>"
#| "\n"
#| "<li>Enter a regular expression for your original file:<br/>"
#| "<tt>\\1.\\2</tt></li>"
#| "\n"
#| "</ul>"
#| "\n"
#| "</p>"
#| "\n"
msgid ""
"<p>When searching for new images, KPhotoAlbum can automatically put new versions\n"
"of images into stacks by looking at their filenames. To configure this feature,\n"
"choose <interface>Settings|Configure KPhotoalbum...</interface> and set appropriate\n"
"values in the <interface>File Searching & Versions</interface> tab.</p>"
"\n"
"<p>\n"
"<ul>\n"
"<li>Enable the checkbox <interface>Try to detect multiple versions of files</interface></li>"
"\n"
"<li>Enter a regular expression for your modified files:<br/>"
"<bcode>^(.*)-adjusted\\.(.*)</bcode></li>"
"\n"
"<li>Enter a regular expression for your original file:<br/>"
"<bcode>\\1.\\2</bcode></li>"
"\n"
"</ul>"
"\n"
"</p>"
"\n"
msgstr ""
"<p>Når KPhotoAlbum leter etter nye bilder kan det automatisk legge nye versjoner\n"
"i stabler ved å se på filnavnene. Du kan stille inn denne funksjonen ved å\n"
"velge «Sett opp KPhotoAlbum …» fra Innstillinger-menyen og sette inn \n"
"passende verdier i fanen «Filsøking og versjoner».</p>"
" \n"
"<p>\n"
"<ul>\n"
"<li>Sett merke i boksen «Prøv å oppdage filer som har flere versjoner»</li>"
" \n"
"<li>Skriv inn et regulært uttrykk for de endrede filene:<br/>"
" <tt>^(.*-justert\\.(.*)</tt></li>"
" \n"
"<li>Skriv inn et regulært uttrykk for originalfila:<br/>"
" <tt>\\1.\\2</tt></li>"
" \n"
"</ul>"
" \n"
"</p>"
" \n"
#. i18n: ectx: @info:tipoftheday
#. +> trunk5
#: tips:155
#, kde-format
msgid ""
"<p>KPhotoAlbum can display the age of people on an image.</p>"
"\n"
"<p>\n"
"To enable this, enter the birthdate of a person under <interface>Maintenance|Edit Birth Dates</interface>.\n"
"The age of the person will then be shown in the info box of the viewer window.\n"
"</p>"
"\n"
msgstr ""
#. i18n: ectx: @info:tipoftheday
#. +> trunk5
#: tips:165
#, kde-format
msgid ""
"<p>KPhotoAlbum can detect and recognize faces on images.</p>"
"\n"
"<p>\n"
"To use this functionality, use the <interface>Search for faces on the current image</interface>\n"
"button below the image preview in the annotation dialog.\n"
"</p>"
"\n"
"<note>To see if face recognition support is enabled, open the feature dialog\n"
"(<interface>Help|KPhotoAlbum feature status</interface>), and check the item\n"
"<resource>Face detection and recognition support</resource>.\n"
"</note>\n"
msgstr ""
#. i18n: ectx: @info:tipoftheday
#. +> trunk5
#: tips:179
#, kde-format
msgid ""
"<p>You can associate tags to an area of an image (e.g. to connect a name to a face).</p>"
"\n"
"<p>\n"
"To do so, make sure that the checkbox <interface>Positionable Tags</interface> under\n"
"<interface>Settings|Configure KPhotoAlbum...|Categories</interface> is enabled for the\n"
"given category.\n"
"</p>"
"\n"
"<p>\n"
"When this is done, you can drag the mouse on the image preview of the annotation dialog to\n"
"mark an area. Open the context menu (right mouse button) on the area to associate it with a tag.\n"
"</p>"
"\n"
msgstr ""
#. i18n: ectx: @info:tipoftheday
#. +> trunk5
#: tips:194
#, kde-format
msgid ""
"<p>\n"
"In the annotation dialog, you can hit <shortcut>Ctrl+Space</shortcut> any time to enlarge the current image.\n"
"To go back to the standard view, press <shortcut>Ctrl+Space</shortcut> again.\n"
"</p>"
"\n"
msgstr ""
#. i18n: ectx: @info:tipoftheday
#. +> trunk5
#: tips:203
#, kde-format
msgid ""
"<p>This is the last tip. If you know any additional tips or tricks, then please\n"
"send an email to <a href=\"mailto:kphotoalbum@kdab.com\">kphotoalbum@kdab.com</a>.</p>"
"\n"
msgstr ""
"<p>Dette er det siste tipset. Hvis du kjenner til flere knep og triks, så nsend en e-post til <a href=\"mailto:kphotoalbum@kdab.com\">kphotoalbum@kdab.com</a>.</p>"
msgctxt "Leave \"Folder\" and \"Media Type\" untranslated below, those will show up with these exact names. Thanks :-)"
msgid ""
"<p><b>This version of KPhotoAlbum does not translate \"standard\" categories any more.</b></p>"
"<p>This may mean that – if you use a locale other than English – some of your categories are now displayed in English.</p>"
"<p>You can manually rename your categories any time and then save your database.</p>"
"<p>In some cases, you may get two additional empty categories, \"Folder\" and \"Media Type\". You can delete those.</p>"
msgstr ""
#. +> trunk5
#: XMLDB/FileReader.cpp:242
#, kde-format
msgid "Changed standard category names"
msgstr ""
#. +> trunk5
#: XMLDB/FileReader.cpp:275
#, kde-format
msgid ""
"<p>Line %1, column %2: duplicate entry for file '%3' with different MD5 sum.</p>"
"<p>Manual repair required!</p>"
msgstr ""
#. +> trunk5
#: XMLDB/FileReader.cpp:394
#, kde-format
msgid ""
"<p>Your images/videos are not sorted, which means that navigating using the date bar will only work suboptimally.</p>"
"<p>In the <b>Maintenance</b> menu, you can find <b>Display Images with Incomplete Dates</b> which you can use to find the images that are missing date information.</p>"
"<p>You can then select the images that you have reason to believe have a correct date in either their Exif data or on the file, and execute <b>Maintenance->Read Exif Info</b> to reread the information.</p>"
"<p>Finally, once all images have their dates set, you can execute <b>Maintenance->Sort All by Date & Time</b> to sort them in the database. </p>"
msgstr ""
#. +> trunk5
#: XMLDB/FileReader.cpp:403
#, kde-format
msgid "Images/Videos Are Not Sorted"
msgstr "Bilder/filmer er ikke sortert"
#. +> trunk5
#: XMLDB/FileReader.cpp:416
#, kde-format
msgid ""
"<p>Not all the images in the database have information about image sizes; this is needed to get the best result in the thumbnail view. To fix this, simply go to the <b>Maintenance</b> menu, and first choose <b>Remove All Thumbnails</b>, and after that choose <tt>Build Thumbnails</tt>.</p>"
"<p>Not doing so will result in extra space around images in the thumbnail view - that is all - so there is no urgency in doing it.</p>"
msgstr ""
"<p>Ikke alle bildene i databasen har opplysninger om bildestørrelsene; dette trengs for å få beste resultat i minibilde-visningen. Dette kan ordnes ved å gå til menyen <b>Vedlikehold</b>, først velge <b>Fjern alle minibilder</b> og deretter <tt>Bygg minibilder</tt>.</p>"
"<p>Om det ikke gjøres blir det litt ekstra plass rundt bildene i minibildevisningen, det er alt, så det har ingen hast.</p>"
#. +> trunk5
#: XMLDB/FileReader.cpp:421
#, kde-format
msgid "Not All Images Have Size Information"
msgstr "Ikke alle bilder har informasjon om størrelsen"
#. +> trunk5
#: XMLDB/FileReader.cpp:442
#, kde-format
msgid ""
"<p>KPhotoAlbum was unable to load a default setup, which indicates an installation error</p>"
"<p>If you have installed KPhotoAlbum yourself, then you must remember to set the environment variable <b>KDEDIRS</b>, to point to the topmost installation directory.</p>"
"<p>If you for example ran cmake with <b>-DCMAKE_INSTALL_PREFIX=/usr/local/kde</b>, then you must use the following environment variable setup (this example is for Bash and compatible shells):</p>"
"<p><b>export KDEDIRS=/usr/local/kde</b></p>"
"<p>In case you already have KDEDIRS set, simply append the string as if you where setting the <b>PATH</b> environment variable</p>"
msgstr ""
"<p>KPhotoAlbum klarte ikke å laste inn et standardoppsett; dette tyder på en feil i installasjonen</p>"
"<p> Hvis du har installert KPhotoAlbum selv, så må du huske på å sette miljøvariablen <b>KDEDIRS</b> til å peke på roten av installasjonstreet.</p>"
" "
"<p>Hvis du for eksempel kjørte cmake med <b>-DCMAKE_INSTALL_PREFIX=/usr/local/kde</b>, så må du bruke følgende oppsett for miljøvariabel (dette eksempelet er for bash og kompatible skall): </p>"
" "
"<p><b>export KDEDIRS=/usr/local/kde</b></p>"
"<p> Hvis KDEDIRS allerede har en verdi, så bare legg til strengen akkurat som om du satte miljøvariablen <b>PATH</b></p>"
#. +> trunk5
#: XMLDB/FileReader.cpp:450
#, kde-format
msgid "No default setup file found"
msgstr "Fant ingen standard oppsettsfil"
#. +> trunk5
#: XMLDB/FileReader.cpp:470
#, kde-format
msgid "Unable to open '%1' for reading"
msgstr "Klarte ikke å åpne «%1» for lesing"
#. +> trunk5
#: XMLDB/FileReader.cpp:483
#, kde-format
msgid "line %1 column %2 in file %3: %4"
msgstr " linje %1 kolonne %2 i fil %3: %4"
#. +> trunk5
#: XMLDB/FileReader.cpp:485
#, kde-format
msgid "Failed to recover the backup: %1"
msgstr "Klarte ikke å gjenopprette fra sikkerhetskopi: %1"
#. +> trunk5
#: XMLDB/FileReader.cpp:496
#, kde-format
msgid "Error in file %1: No elements found"
msgstr "Feil i fil %1: ingen elementer funnet"
#. +> trunk5
#: XMLDB/FileReader.cpp:502
#, kde-format
msgid "Error in file %1: expected 'KPhotoAlbum' as top element but found '%2'"
msgstr "Feil i fil %1; forventet «KPhotoAlbum» som toppelement men fant «%2»"
#. +> trunk5
#: XMLDB/FileWriter.cpp:70
#, kde-format
msgid ""
"<p>Could not save the image database to XML.</p>"
"File %1 could not be opened because of the following error: %2"
msgstr ""
"<p>Klarte ikke å lagre bildedatabasen til XML.</p>"
" Fila %1 kunne ikke åpnes på grunn av følgende feil: %2"
#~ msgid "Widen selection to include all images and videos again"
#~ msgstr "Utvid utvalget til å ta med alle bilder og videoer igjen"
#~ msgctxt "@info"
#~ msgid ""
#~ "<title>The date bar</title>"
#~ "<para>The date bar gives you an overview of the approximate number of images taken in a given time frame.Time units are shown on the <emphasis>timeline</emphasis>. Above it, a histogram indicates the number of images for that time range.</para>"
#~ "<para>You can interact with the date bar in several ways:"
#~ "<list>"
#~ "<item>Zoom in or out by using the +/- buttons or Ctrl + scrollwheel.</item>"
#~ "<item>Scroll the timeline either by using the arrow buttons or the scroll wheel, or by dragging it using the middle mouse button.</item>"
#~ "<item>Restrict the current view to a given time frame by clicking below the timeline and marking the time frame.</item>"
#~ "<item>Clicking on the timeline sets the <emphasis>focus</emphasis> for the thumbnail view, i.e. jumps to the first thumbnail of the time unit in focus.</item>"
#~ "</list>"
#~ "</para>"
#~ msgstr ""
#~ "<title>Dato-linja</title>"
#~ " "
#~ "<para>Dato-linja gir en oversikt over et omtrentlig antall bilder som er tatt i en viss tidsperiode. Tidsenheten vises i <emphasis>tidslinja</emphasis>. Over den viser et histogram antall bilder for den tidsperioden.</para>"
#~ " "
#~ "<para>Du kan bruke datolinja på flere måter: "
#~ "<list> "
#~ "<item>Forstørr eller forminsk med +/- knappene eller Ctrl + musehjulet.</item>"
#~ " "
#~ "<item>Rull tidslinja, enten med piltaster eller musehjulet, eller ved å dra med midtknappen på musa.</item>"
#~ "<item>Begrens visningen til en viss tidsperiode ved å trykke under timelinja og markere tidsperioden.</item>"
#~ "<item>Ved trykk på timelinja settes <emphasis>fokus</emphasis> for minibilde-visningen, dvs. hopper til første minibilde i tidspunktet i fokus.</item>"
#~ " </list>"
#~ " </para>"
#~ msgid "Error Executing Exif Command"
#~ msgstr "Feil ved kjøring av Exif-kommando"
#~ msgid "Base URL:"
#~ msgstr "Basis-URL:"
#~ msgid "<b>Hint: Press the help button for descriptions of the fields</b>"
#~ msgstr "<b>Tips: Trykk Hjelp-knappen for å få en beskrivelse av feltene</b>"
#~ msgid "Config file"
#~ msgstr "Oppsettsfil"
#~ msgid "Development"
#~ msgstr "Utvikling"
#~ msgid "SQL backend and numerous features"
#~ msgstr "SQL-motor og tallrike funksjoner"
#~ msgid "Sending patches implementing (.) the \"Set As Wallpaper\" menu in the viewer.(.) Theme support for HTML generation"
#~ msgstr "Sender patcher som implementerer (.) menyen «Sett som bakgrunnsbilde» i framviseren.(.) Temastøtte for HTML-generering"
#~ msgid "Numerous patches plus profiling KPhotoAlbum again and again."
#~ msgstr "Tallrike patcher samt profilkjøring av KPhotoAlbum igjen og igjen."
#~ "<p>KPhotoAlbum uses <tt>MPlayer</tt> to extract thumbnails from videos. These thumbnails are used to preview videos in the thumbnail viewer.</p>"
#~ "<p>If at all possible you should install the <b>MPlayer2</b> package rather than the <b>MPlayer</b> package, as it has important improvements over the MPlayer package. MPlayer (in contrast to MPlayer2) often has problems extracting the length of videos and also often fails to extract the thumbnails used for cycling video thumbnails.</p>"
#~ "<p>KPhotoAlbum bruker <tt>MPlayer</tt> til å trekke ut minibilder fra videoer. Disse minibildene brukes til å forhåndsvise videoer i minibilde-visningen.</p>"
#~ " "
#~ "<p>Hvis det er mulig på noen måte, bør du installere <b>MPlayer2</b>-pakka i stedet for <b>MPlayer</b>-pakka, fordi den har viktige forbedringer over MPlayer-pakka. MPlayer har, i motsetning til MPlayer2, ofte vansker med å finne lengden på videoer og klarer ofte ikke å trekke ut minibilder som brukes til roterende minibilder for videoer. "
#~ msgid "EXIF info supported"
#~ msgstr "EXIF-info som er støttet"
#~ msgid "Only with MPlayer1"
#~ msgstr "Bare med MPlayer1"
#~ msgid "Reading file properties"
#~ msgstr "Leser filegenskaper"
#~ msgid "EXIF database cannot be opened. Check that the image root directory is writable."
#~ msgstr "Klarte ikke åpne EXIF-databasen. Se etter at rot-mappa for bilder kan skrives."
#~ msgid "Recreate Exif Search Database (need to compile KPhotoAlbum with Exif support)"
#~ msgstr "Gjenopprett Exif søkedatabase (KPhotoAlbum må kompileres med Exif-støtte)"
#~ msgid "Read EXIF Info From Files... (need to compile KPhotoAlbum with Exif support)"
#~ msgstr "Les EXIF-informasjon fra filer … (KPhotoAlbum må kompileres med Exif-støtte)"
#~ msgid "<p>You have MPlayer installed on your system, but it is unfortunately not version 2. MPlayer2 is on most systems a separate package, please install that if at all possible, as that version has much better support for extracting thumbnails from videos.</p>"
#~ msgstr "<p>Du har MPlayer installert, men det er dessverre ikke versjon 2. MPlayer2 er en egen pakke på de fleste systemer, installer denne hvis det er mulig, siden den versjonen har mye bedre støtte for å trekke ut minibilder fra videoer.</p>"
#~ msgid "MPlayer is too old"
#~ msgstr "MPlayer er for gammel"
#~ msgid "Background Color"
#~ msgstr "Bakgrunnsfarge"
#~ msgctxt "@title:inmenu"
#~ msgid "Set as Wallpaper"
#~ msgstr "Sett som bakgrunnsbilde"
#~ msgctxt "@action:inmenu"
#~ msgid "Centered"
#~ msgstr "Sentrert"
#~ msgctxt "@action:inmenu"
#~ msgid "Tiled"
#~ msgstr "Flislagt"
#~ msgctxt "@action:inmenu"
#~ msgid "Center Tiled"
#~ msgstr "Sentrert flislagt"
#~ msgctxt "@action:inmenu"
#~ msgid "Centered Maxpect"
#~ msgstr "Sentrert og størst mulig"
#~ msgctxt "@action:inmenu"
#~ msgid "Tiled Maxpect"
#~ msgstr "Flislagt og størst mulig"
#~ msgctxt "@action:inmenu"
#~ msgid "Scaled"
#~ msgstr "Skalert"
#~ msgctxt "@action:inmenu"
#~ msgid "Centered Auto Fit"
#~ msgstr "Sentrert autotilpasset"
#~ msgid "Show EXIF"
#~ msgstr "Vis EXIF"
#~ msgid ""
#~ "<p>Your images/videos are not sorted, which means that navigating using the date bar will only work suboptimally.</p>"
#~ "<p>You also do not have EXIF support available, which means that you cannot read image dates from JPEG metadata. It is strongly recommended to recompile KPhotoAlbum with the <code>exiv2</code> library. After you have done so, you will be asked what to do to correct all the missing information.</p>"
#~ msgstr ""
#~ "<p>Dine bilder/filmer er ikke sortert, så søking med datolinja vil ikke virke på beste måte.</p>"
#~ " "
#~ "<p>Dessuten har du ikke EXIF-støtte tilgjengelig, noe som betyr at du ikke kan lese bildedatoer fra JPEG metadata. Det anbefales steerkt å kompilere KPhotoAlbum på nytt med <code>exiv2</code>-biblioteket. Når dette er gjort vil du få spørsmål om hva som skal gjøres for å rette på de manglende opplysningene.</p>"
#~ msgid "Close"
#~ msgstr "Lukk"
#~ msgid "Accuracy"
#~ msgstr "Nøyaktighet"
#, fuzzy
#~ msgid "Sensitivity"
#~ msgstr "Følsomhet"
#, fuzzy
#~ msgid "Delete selected"
#~ msgstr "Slett merkede"
#~ msgid ""
#~ "<p>Error: Cannot use current database file '%1':</p>"
#~ "<p>%2</p>"
#~ "<p>Do you want to use autosave (%3 - size %4 KB) instead of exiting?</p>"
#~ "<p><small>(Manually verifying and copying the file might be a good idea)</small></p>"
#~ msgstr ""
#~ "<p>Feil: Kan ikke bruke den gjeldende databasefila «%1»:</p>"
#~ " "
#~ "<p>%2</p>"
#~ " "
#~ "<p>Vil du bruke autolagring (%3 – størrelse %4 KB) i stedet for å avslutte?</p>"
#~ " "
#~ "<p><small>(Det kan være lurt å verifisere og kopiere fila manuelt)</small></p>"
#~ msgid "Recover from Autosave?"
#~ msgstr "Gjenopprett fra Autolagret?"
#~ msgid ""
#~ "<p>Error: %1</p>"
#~ "<p>Also autosave file is empty, check manually if numbered backup files exist and can be used to restore index.xml.</p>"
#~ msgstr ""
#~ "<p>Feil: %1</p>"
#~ " "
#~ "<p>Autolagret fil er dessuten tom, undersøk manuelt om det finnes nummererte sikringskopier som kan brukes til å gjenopprette index.html.</p>"
"You are running an unsupported version of Windows: %1.\n"
"This is not recommended. Do not report any bugs.\n"
"Please update to a supported version of Windows: Windows 7, 8, 8.1 or 10."
msgstr ""
#. +> trunk5 stable5
#: krita/main.cc:474 krita/main.cc:479
#, kde-format
msgid "Krita Tablet Support"
msgstr ""
#. +> trunk5 stable5
#: krita/main.cc:475
#, kde-format
msgid "Cannot load WinTab driver and no Windows Ink pen devices are found. If you have a drawing tablet, please make sure the tablet driver is properly installed."
msgstr ""
#. +> trunk5 stable5
#: krita/main.cc:480
#, kde-format
msgid "Cannot load WinTab driver. If you have a drawing tablet, please make sure the tablet driver is properly installed."
msgid "Adds pixels using the color of surrounding pixels. Produces smoother tonal gradations than Bilinear."
msgstr "Legger til piksler ved å bruke fargen til piksler omkring. Gir en jevnere toneovergang enn Bilineær."
#. +> trunk5 stable5
#: libs/image/kis_filter_strategy.h:97
#, kde-format
msgid "Nearest Neighbor"
msgstr "Nærmeste nabo"
#. +> trunk5 stable5
#: libs/image/kis_filter_strategy.h:105
#, kde-format
msgid "Replicate pixels in the image. Preserves all the original detail, but can produce jagged effects."
msgstr "Repliker piksler i bildet. Bevarer alle originale detaljer, men kan gi takkete effekter."
#. +> trunk5 stable5
#: libs/image/kis_filter_strategy.h:119
#: libs/ui/canvas/kis_canvas_controller.cpp:294
#, kde-format
msgid "Bilinear"
msgstr "Bi-lineært"
#. +> trunk5 stable5
#: libs/image/kis_filter_strategy.h:125
#, kde-format
msgid "Adds pixels averaging the color values of surrounding pixels. Produces medium quality results when the image is scaled from half to two times the original size."
msgstr "Legger til piksler med gjennomsnitt av fargeverdier for pikslene omkring. Gir resultat av middels kvalitet når bildet skaleres fra en halv til to ganger original størrelse."
#. +> trunk5 stable5
#: libs/image/kis_filter_strategy.h:135
#, kde-format
msgid "Bell"
msgstr "Bjelle"
#. +> trunk5 stable5
#: libs/image/kis_filter_strategy.h:146
#, kde-format
msgid "BSpline"
msgstr "BSpline"
#. +> trunk5 stable5
#: libs/image/kis_filter_strategy.h:157
#, kde-format
msgid "Lanczos3"
msgstr "Lanczos3"
#. +> trunk5 stable5
#: libs/image/kis_filter_strategy.h:163
#, kde-format
msgid "Offers similar results than Bicubic, but maybe a little bit sharper. Can produce light and dark halos along strong edges."
msgstr "Gir liknende resultater som Bikubisk, men kanskje litt skarpere. Kan lage lyse og mørke glorier langs sterke kanter."
msgid "This image is larger than <b>%1 x %2</b>. Images this size cannot be saved to this format."
msgstr ""
#. +> trunk5 stable5
#: libs/impex/ColorModelCheck.h:44
#, kde-format
msgctxt "image conversion warning"
msgid "The color model <b>%1</b> or channel depth <b>%2</b> cannot be saved to this format. Your image will be converted."
msgstr ""
#. +> trunk5 stable5
#: libs/impex/ColorModelHomogenousCheck.h:125
#, kde-format
msgctxt "image conversion warning"
msgid "Your image contains layers with a color model that is different from the image. The layers will be converted."
msgstr ""
#. +> trunk5 stable5
#: libs/impex/ColorModelPerLayerCheck.h:129
#, kde-format
msgctxt "image conversion warning"
msgid "Your image contains layers with the color model <b>%1</b> and channel depth <b>%2</b> which cannot be saved to this format. The layers will be converted."
msgstr ""
#. +> trunk5 stable5
#: libs/impex/CompositionsCheck.h:36
#, kde-format
msgctxt "image conversion warning"
msgid "The image contains <b>compositions</b>. The compositions will not be saved."
msgstr ""
#. +> trunk5 stable5
#: libs/impex/ExifCheck.h:40
#, kde-format
msgctxt "image conversion warning"
msgid "The image contains <b>Exif</b> metadata. The metadata will not be saved."
msgid "This merge strategy attempts to find the best solution for merging, for instance by merging the list of authors together, or keeping identical photographic information."
msgstr "Denne flettestrategien forsøker å finne den beste løsningen for fletting, for eksempel ved å flette sammen lista over opphavsfolk, eller beholde fotografisk informasjon."
msgctxt "Heading for the list of Krita authors/developers"
msgid "Authors"
msgstr "Forfattere"
#. +> trunk5 stable5
#: libs/ui/dialogs/kis_about_application.cpp:98
#, kde-format
msgid ""
"<html><head/><body>"
"<h1 align=\"center\">Backed By</h1>"
"<p>"
msgstr ""
"<html><head/><body>"
"<h1 align=\"center\">Støttet av</h1>"
"<p>"
#. +> trunk5 stable5
#: libs/ui/dialogs/kis_about_application.cpp:111
#, kde-format
msgid ""
".</p>"
"<p><i>Thanks! You were all <b>awesome</b>!</i></p>"
"</body></html>"
msgstr ""
".</p>"
"<p><i>Takk! Dere var alle <b>fantastiske</b>!</i></p>"
"</body></html>"
#. +> trunk5 stable5
#: libs/ui/dialogs/kis_about_application.cpp:113
#, kde-format
msgid "Backers"
msgstr "Støttere"
#. +> trunk5 stable5
#: libs/ui/dialogs/kis_about_application.cpp:119
#, kde-format
msgid ""
"<html><head/><body>"
"<h1 align=\"center\">Thanks To</h1>"
"<p>"
msgstr ""
"<html><head/><body>"
"<h1 align=\"center\">Takk til</h1>"
"<p>"
#. +> trunk5 stable5
#: libs/ui/dialogs/kis_about_application.cpp:138
#, kde-format
msgid ""
".</p>"
"<p><i>For supporting Krita development with advice, icons, brush sets and more.</i></p>"
"</body></html>"
msgstr ""
".</p>"
"<p><i>For støtte til Krita-utvikling med råd. ikoner, penselsett og mere til.</i></p>"
"</body></html>"
#. +> trunk5 stable5
#: libs/ui/dialogs/kis_about_application.cpp:141
#, kde-format
msgid "Also Thanks To"
msgstr "Også takk til"
#. +> trunk5 stable5
#: libs/ui/dialogs/kis_about_application.cpp:145
#, fuzzy, kde-format
#| msgid ""
#| "<html><head/><body>"
#| "<h1 align=\"center\"><b>Your Rights</h1>"
#| "<p>Krita is released under the GNU General Public License (version 2 or any later version).</p>"
#| "<p>This license grants people a number of freedoms:</p>"
#| "<ul>"
#| "<li>You are free to use Krita, for any purpose</li>"
#| "<li>You are free to distribute Krita</li>"
#| "<li>You can study how Krita works and change it</li>"
#| "<li>You can distribute changed versions of Krita</li>"
#| "</ul>"
#| "<p>The Krita Foundation and its projects on krita.org are <b>committed</b> to preserving Krita as free software.</p>"
#| "<h1 align=\"center\">Your artwork</h1>"
#| "<p>What you create with Krita is your sole property. All your artwork is free for you to use as you like.</p>"
#| "<p>That means that Krita can be used commercially, for any purpose. There are no restrictions whatsoever.</p>"
#| "<p>Krita’s GNU GPL license guarantees you this freedom. Nobody is ever permitted to take it away, in contrast to trial or educational versions of commercial software that will forbid your work in commercial situations.</p>"
#| "<br/>"
#| "<hr/>"
#| "<pre>"
msgid ""
"<html><head/><body>"
"<h1 align=\"center\"><b>Your Rights</b></h1>"
"<p>Krita is released under the GNU General Public License (version 3 or any later version).</p>"
"<p>This license grants people a number of freedoms:</p>"
"<ul>"
"<li>You are free to use Krita, for any purpose</li>"
"<li>You are free to distribute Krita</li>"
"<li>You can study how Krita works and change it</li>"
"<li>You can distribute changed versions of Krita</li>"
"</ul>"
"<p>The Krita Foundation and its projects on krita.org are <b>committed</b> to preserving Krita as free software.</p>"
"<h1 align=\"center\">Your artwork</h1>"
"<p>What you create with Krita is your sole property. All your artwork is free for you to use as you like.</p>"
"<p>That means that Krita can be used commercially, for any purpose. There are no restrictions whatsoever.</p>"
"<p>Krita’s GNU GPL license guarantees you this freedom. Nobody is ever permitted to take it away, in contrast to trial or educational versions of commercial software that will forbid your work in commercial situations.</p>"
"<br/>"
"<hr/>"
"<pre>"
msgstr ""
"<html><head/><body>"
"<h1 align=\"center\"><b>Dine rettigheter</h1>"
"<p>Krita er utgitt med GNU General Public License (versjon 2 eller enhver senere versjon).</p>"
"<p>Denne lisensen gir brukere en del rettigheter:</p>"
"<ul>"
"<li>Du er fri til å bruke Krita til ethvert formål</li>"
"<li> Du er fri til å distribuere Krita videre</li>"
"<li> Du er fri til å studere hvordan Krita virker, og endre det</li>"
"<li> Du kan distribuere endrede versjoner av Krita</li>"
"</ul>"
"<p>Krita Foundation og dens prosjekter på krita.org er <b>forpliktet</b> til å bevare Krita som fri programvare.</p>"
"<h1 align=\"center\">Ditt arbeid</h1>"
"<p>Det du lager med Krita er din egen eiendom. All din grafikk er fri til å bruke som du vil.</p>"
"<p>Det betyr at Krita kan brukes kommersielt, for ethvert formål. Det er ingen som helst restriksjoner.</p>"
"<p>Kritas GNU GPL-lisens garanterer denne friheten. ingen kan noen gang ta den fra deg, i motsetning tilprøve- eller opplæringsversjoner av kommersiell programvare som vil forby deg å bruke ditt eget arbeidi kommersielle situasjoner.</p>"
"<br/>"
"<hr/>"
"<pre>"
#. +> trunk5 stable5
#: libs/ui/dialogs/kis_about_application.cpp:173
#, kde-format
msgid "License"
msgstr "Lisens"
#. +> trunk5 stable5
#: libs/ui/dialogs/kis_about_application.cpp:181
#, kde-format
msgid ""
"<html><head/><body>"
"<h1 align=\"center\"><b>Third-party Libraries used by Krita</b></h1>"
"<p>Krita is built on the following free software libraries:</p>"
msgid "The image data you want to paste does not have an ICM profile associated with it. If you do not select a profile, Krita will assume that the image data is encoded in the import profile defined in the Settings dialog."
msgstr "Bildedataene som du vil lime inn mangler ICM-profil. Hvis du ikke velger en profil, vil Krita anta at bildedataene er kodet i henhold til den importprofilen som er angitt i oppsettdialogvinduet."
msgid "Hue hopefully maintained (but not required), lightness and saturation sacrificed to maintain the perceived color. White point changed to result in neutral grays. Intended for images."
msgstr "Fargetonen blir forhåpentlig opprettholdt (men ikke nødvendigvis), lysstyrke og metning blir ofret for å beholde fargen slik den sanses. Hvitpunkt endret til nøytrale gråtoner. Ment for bilder."
msgid "Hue and saturation maintained with lightness sacrificed to maintain saturation. White point changed to result in neutral grays. Intended for business graphics (make it colorful charts, graphs, overheads, ...)"
msgstr "Fargetone og metning blir opprettholdt og lysstyrke ofret. Hvitpunkt endres til nøytrale gråtoner. ment for økonomiske presentasjoner (gjør det fargerikt, grafer, diagrammer og lysark, …)"
msgid "Within the destination device gamut; hue, lightness and saturation are maintained. Outside the gamut; hue and lightness are maintained, saturation is sacrificed. White point for source and destination; unchanged. Intended for spot colors (Pantone, TruMatch, logo colors, ...)"
msgstr "Innenfor målenhetens område blir tone, metning og lysstyrke bevart Utenfor området blir tone og lysstyrke blir vedlikeholdt mens metning ofres. Hvitpunkt for kilde og mål; uforandret. Ment for punktfarger (Pantone, TruMatch, logo colors, …)"
"<p><a href=\"https://en.wikipedia.org/wiki/Color_space\"><span style=\" font-weight:600; text-decoration: underline; color:#006e28;\">Color Spaces</span></a> determine how colors are encoded in your files. Different color spaces have different properties and are used for different purposes.</p>"
"<p>Try to disable vsync for Krita. This makes painting more responsive. Uncheck only when experiencing crashes with some GPU/driver combinations.</p>"
"<p><span style=\" font-weight:600;\">Note:</span> This changes only the colorspace of the rendered image. To convert the colorspace of the layers, use Convert Image Colorspace.</p>"
"<p>Set how much you wish to correct the adaptation state. This will affect how <span style=\" font-style:italic;\">Absolute Colorimetric</span> changes the whites of your image. In Layman's terms: how much do you wish to have the color management correct the paper-color to screen white while using <span style=\" font-style:italic;\">Absolute Colorimetric</span>?</p>"
"<p>Black Point compensation matches the darkest color of the source device to the darkest color of the destination device. Relative Colorimetric without Black Point Compensation will show the difference between the darkest values. With blackpoint compensation, black is black.</p>"
#| msgctxt "You are about to translate the 'CanvasColor' COMMAND, there are some rules on how to translate it.Please see http://edu.kde.org/kturtle/translator.php to learn how to properly translate it."
"<p>When rendering animation frames (into files or during animation cache regeneration), Krita will make the specified number of copies of your image and will work on them in parallel. Each copy will demand more RAM for its storage (about 20% of the size of you image), so raise this limit only if you have enough RAM installed.</p>"
"<p><br/>"
"</p>"
"<p><span style=\" font-weight:600;\">Recommended value:</span> set Clones Limit to the number of <span style=\" text-decoration: underline;\">physical</span> (non-hyperthreaded) cores your CPU has</p>"
"<p>Krita will try to limit the number of screen updates per second to the given number. A lower number will decrease visual responsiveness but increase stylus precision on some systems like macOS."
"<p>When performance logging is enabled Krita saves timing information into the '<working_dir>/log' folder. If you experience performance problems and want to help us, enable this option and add the contents of the directory to a bug report.</p>"
"<p>Animation frame cache will be stored in RAM completely without any limitations</p>"
"<p><span style=\" font-weight:600;\">WARNING:</span> please make sure your computer has enough RAM <span style=\" text-decoration: underline;\">above</span> the amount you requested in General tab. Otherwise you might face system freezes.</p>"
"<p>* for 1 second of FullHD@25fps video you need extra 200 MiB of memory</p>"
"<p>* for 1 second of 4K UltraHD@25fps video you need extra 800 MiB of memory</p>"
"<p>Animation frames are stored on hard disk in the same folder as swap file. The cache is stored in a compressed way. Little amount of extra RAM is needed.</p>"
"<p>Since data transfer speed of the hard drive is low, you might want to limit cached frame size to be able to play your video at 25 fps. The limit of 2500 px is usually a good choice.</p>"
"<p>Render scaled down version of the frame if the image is bigger than the provided limit. Make sure you enable this option when using on-disk storage backend.</p>"
"<p>Choose the optional emblem icon that indicates extra information, such as the preset being a special effects brush, or just using tilt, or angled in some way.</p>"
"<p>Some tablet devices don't pass barrel-button clicks via tablet API. If you have such a device, you can try activate this workaround. Krita will try to read right- and middle-button clicks from the mouse events stream. It may or may not work on your device (depends on the tablet driver implementation).</p>"
"<p><br/>"
"</p>"
"<p>After changing this option Krita should be restarted.</p>"
msgid "The <i>Alternate Invocation</i> action performs an alternate action with the current tool. For example, using the brush tool it picks a color from the canvas."
"<p>The driver for your drawing tablet and Windows do not agree on the size of the screen your tablet is connected to. Please select the right option.</p>"
msgid "A spot color is a color that the printer is able to print without mixing the paints it has available to it. The opposite is called a process color."
msgid "The Intel graphics driver in use is known to have issues with OpenGL."
msgstr ""
#. +> trunk5 stable5
#: libs/ui/opengl/kis_opengl.cpp:491
#, kde-format
msgid "Intel graphics drivers tend to have issues with OpenGL so ANGLE will be used by default. You may manually switch to OpenGL but it is not guaranteed to work properly."
msgstr ""
#. +> trunk5 stable5
#: libs/ui/opengl/kis_opengl.cpp:872
#, kde-format
msgid "Preferred renderer doesn't support requested surface format. Another renderer has been selected."
msgstr ""
#. +> trunk5 stable5
#: libs/ui/opengl/kis_opengl.cpp:874
#, kde-format
msgid "Preferred output format is not supported by available renderers"
msgstr ""
#. +> trunk5 stable5
-#: libs/ui/opengl/kis_opengl_canvas2.cpp:378
+#: libs/ui/opengl/kis_opengl_canvas2.cpp:382
#, fuzzy, kde-format
#| msgid ""
#| "Krita could not initialize the OpenGL canvas:\n"
#| " %1.\n"
#| " Krita will disable OpenGL and close now."
msgid ""
"Krita could not initialize the OpenGL canvas:\n"
"\n"
"%1\n"
"\n"
" Krita will disable OpenGL and close now."
msgstr ""
"Krita klarte ikke å klargjøre OpenGL-lerretet.\n"
#. i18nc("Who made the profile?","Manufacturer: ") + currentColorSpace()->profile()->manufacturer() + "</p>"); //This would work if people actually wrote the manufacturer into the manufacturer fiedl...
"<b><a href=\"https://en.wikipedia.org/wiki/RGB_color_space\">RGB (Red, Green, Blue)</a></b>, is the color model used by screens and other light-based media.<br/>"
"RGB is an additive color model: adding colors together makes them brighter. This color model is the most extensive of all color models, and is recommended as a model for painting,that you can later convert to other spaces. RGB is also the recommended colorspace for HDR editing."
"<b><a href=\"https://en.wikipedia.org/wiki/CMYK_color_model\">CMYK (Cyan, Magenta, Yellow, Key)</a></b>, is the model used by printers and other ink-based media.<br/>"
"CMYK is a subtractive model, meaning that adding colors together will turn them darker. Because of CMYK profiles being very specific per printer, it is recommended to work in RGB space, and then later convert to a CMYK profile, preferably one delivered by your printer. <br/>"
"CMYK is <b>not</b> recommended for painting.Unfortunately, Krita cannot retrieve colorants or the TRC for this space."
msgid "<b><a href=\"https://en.wikipedia.org/wiki/CIE_1931_color_space\">CIE XYZ</a></b>is the space determined by the CIE as the space that encompasses all other colors, and used to convert colors between profiles. XYZ is an additive color model, meaning that adding colors together makes them brighter. XYZ is <b>not</b> recommended for painting, but can be useful to encode in. The Tone Response Curve is assumed to be linear."
"<b><a href=\"https://en.wikipedia.org/wiki/Grayscale\">Grayscale</a></b> only allows for gray values and transparent values. Grayscale images use half the memory and disk space compared to an RGB image of the same bit-depth.<br/>"
"Grayscale is useful for inking and grayscale images. In Krita, you can mix Grayscale and RGB layers in the same image."
"<b><a href=\"https://en.wikipedia.org/wiki/Lab_color_space\">L*a*b</a></b>. <b>L<b> stands for Lightness, the <b>a</b> and <b>b</b> components represent color channels.<br/>"
"L*a*b is a special model for color correction. It is based on human perception, meaning that it tries to encode the difference in lightness, red-green balance and yellow-blue balance. This makes it useful for color correction, but the vast majority of color maths in the blending modes do <b>not</b> work as expected here.<br/>"
"Similarly, Krita does not support HDR in LAB, meaning that HDR images converted to LAB lose color information. This colorspace is <b>not</b> recommended for painting, nor for export, but best as a space to do post-processing in. The TRC is assumed to be the L* TRC."
msgid "<b><a href=\"https://en.wikipedia.org/wiki/YCbCr\">YCbCr (Luma, Blue Chroma, Red Chroma)</a></b>, is a model designed for video encoding. It is based on human perception, meaning that it tries to encode the difference in lightness, red-green balance and yellow-blue balance. Chroma in this case is then a word indicating a special type of saturation, in these cases the saturation of Red and Blue, of which the desaturated equivalents are Green and Yellow respectively. It is available to open up certain images correctly, but Krita does not currently ship a profile for this due to lack of open source ICC profiles for YCrCb."
msgid "<b>8 bit integer</b>: The default number of colors per channel. Each channel will have 256 values available, leading to a total amount of colors of 256 to the power of the number of channels. Recommended to use for images intended for the web, or otherwise simple images."
msgid "<b>16 bit integer</b>: Also known as 'deep color'. 16 bit is ideal for editing images with a linear TRC, large color space, or just when you need more precise color blending. This does take twice as much space on the RAM and hard-drive than any given 8 bit image of the same properties, and for some devices it takes much more processing power. We recommend watching the RAM usage of the file carefully, or otherwise use 8 bit if your computer slows down. Take care to disable conversion optimization when converting from 16 bit/channel to 8 bit/channel."
msgctxt "When the selected Bitdepth is 16 bit float"
msgid "<b>16 bit floating point</b>: Also known as 'Half Floating Point', and the standard in VFX industry images. 16 bit float is ideal for editing images with a linear Tone Response Curve, large color space, or just when you need more precise color blending. It being floating point is an absolute requirement for Scene Referred (HDR) images. This does take twice as much space on the RAM and hard-drive than any given 8 bit image of the same properties, and for some devices it takes much more processing power. We recommend watching the RAM usage of the file carefully, or otherwise use 8 bit if your computer slows down."
msgctxt "When the selected Bitdepth is 32bit float"
msgid "<b>32 bit float point</b>: Also known as 'Full Floating Point'. 32 bit float is ideal for editing images with a linear TRC, large color space, or just when you need more precise color blending. It being floating point is an absolute requirement for Scene Referred (HDR) images. This does take four times as much space on the RAM and hard-drive than any given 8 bit image of the same properties, and for some devices it takes much more processing power. We recommend watching the RAM usage of the file carefully, or otherwise use 8 bit if your computer slows down."
msgctxt "When the selected Bitdepth is 64bit float, but this isn't actually available in Krita at the moment."
msgid "<b>64 bit float point</b>: 64 bit float is as precise as it gets in current technology, and this depth is used most of the time for images that are generated or used as an input for software. It being floating point is an absolute requirement for Scene Referred (HDR) images. This does take eight times as much space on the RAM and hard-drive than any given 8 bit image of the same properties, and for some devices it takes much more processing power. We recommend watching the RAM usage of the file carefully, or otherwise use 8 bit if your computer slows down."
msgctxt "These are Elle Stone's notes on her profiles that we ship."
msgid ""
"<p><b>Extra notes on profiles by Elle Stone:</b></p>"
"<p><i>Krita comes with a number of high quality profiles created by <a href=\"http://ninedegreesbelow.com\">Elle Stone</a>. This is a summary. Please check <a href=\"http://ninedegreesbelow.com/photography/lcms-make-icc-profiles.html\">the full documentation</a> as well.</i></p>"
msgid "<p>Quoting Wikipedia, 'Academy Color Encoding System (ACES) is a color image encoding system proposed by the Academy of Motion Picture Arts and Sciences that will allow for a fully encompassing color accurate workflow, with 'seamless interchange of high quality motion picture images regardless of source'.</p>"
msgid "<p>The ACEScg color space is smaller than the ACES color space, but large enough to contain the 'Rec-2020 gamut and the DCI-P3 gamut', unlike the ACES color space it has no negative values and contains only few colors that fall just barely outside the area of real colors humans can see</p>"
"<p>To avoid possible copyright infringement issues, I used 'ClayRGB' (following ArgyllCMS) as the base name for these profiles. As used below, 'Compatible with Adobe RGB 1998' is terminology suggested in the preamble to the AdobeRGB 1998 color space specifications.</p>"
"<p>The Adobe RGB 1998 color gamut covers a higher percentage of real-world cyans, greens, and yellow-greens than sRGB, but still doesn't include all printable cyans, greens, yellow-greens, especially when printing using today's high-end, wider gamut, ink jet printers. BetaRGB (not included in the profile pack) and Rec.2020 are better matches for the color gamuts of today's wide gamut printers.</p>"
"<p>The Adobe RGB 1998 color gamut is a reasonable approximation to some of today's high-end wide gamut monitors.</p>"
"<p>This profile's color gamut is roughly the same size and shape as the ACES color space gamut, and like the ACES color space, AllColorsRGB holds all possible real colors. But AllColorsRGB actually has a slightly larger color gamut (to capture some fringe colors that barely qualify as real when viewed by the standard observer) and uses the D50 white point.</p>"
"<p>Just like the ACES color space, AllColorsRGB holds a high percentage of imaginary colors. See the Completely <a href=\"http://ninedegreesbelow.com/photography/xyz-rgb.html\">Painless Programmer's Guide to XYZ, RGB, ICC, xyY, and TRCs</a> for more information about imaginary colors.</p>"
"<p>There is no particular reason why anyone would want to use this profile for editing, unless one needs to make sure your color space really does hold all possible real colors.</p>"
"<p>This profile is included mostly for its historical significance. It's the color space that was used in the original color matching experiments that led to the creation of the XYZ reference color space.</p>"
"<p>The ASTM E white point is probably the right E white point to use when making the CIERGB color space profile. It's not clear to me what the correct CIERGB primaries really are. Lindbloom gives one set. The LCMS version 1 tutorial gives a different set. Experts in the field contend that the real primaries should be calculated from the spectral wavelengths, so I did.</p>"
msgid "<p>The IdentityRGB working space is included in the profile pack because it's a mathematically obvious way to include all possible visible colors, though it has a higher percentage of imaginary colors than the ACES and AllColorsRGB color spaces. I cannot think of any reason why you'd ever want to actually edit images in the IdentityRGB working space.</p>"
"<p>To avoid possible copyright infringement issues, I used 'LargeRGB' (following RawTherapee) as the base name for these profiles."
"<p>Kodak designed the RIMM/ROMM (ProPhotoRGB) color gamut to include all printable and most real world colors. It includes some imaginary colors and excludes some of the real world blues and violet blues that can be captured by digital cameras. It also excludes some very saturated 'camera-captured' yellows as interpreted by some (and probably many) camera matrix input profiles.</p>"
"<p>The ProPhotoRGB primaries are hard-coded into Adobe products such as Lightroom and the Dng-DCP camera 'profiles'. However, other than being large enough to hold a lot of colors, ProPhotoRGB has no particular merit as an RGB working space. Personally I recommend the Rec.2020 or ACEScg profiles over ProPhotoRGB. But if you have an already well-established workflow using ProPhotoRGB, you might find a shift to another RGB working space a little odd, at least at first, and so you have to weight the pros and cons of changing your workflow.</p>"
"<p>To avoid possible copyright infringement issues, I used 'LargeRGB' (following RawTherapee) as the base name for these profiles."
"<p>Kodak designed the RIMM/ROMM (ProPhotoRGB) color gamut to include all printable and most real world colors. It includes some imaginary colors and excludes some of the real world blues and violet blues that can be captured by digital cameras. It also excludes some very saturated 'camera-captured' yellows as interpreted by some (and probably many) camera matrix input profiles.</p>"
"<p>The ProPhotoRGB primaries are hard-coded into Adobe products such as Lightroom and the Dng-DCP camera 'profiles'. However, other than being large enough to hold a lot of colors, ProPhotoRGB has no particular merit as an RGB working space. Personally I recommend the Rec.2020 or ACEScg profiles overProPhotoRGB. But if you have an already well-established workflow using ProPhotoRGB, youmight find a shift to another RGB working space a little odd, at least at first, and so youhave to weight the pros and cons of changing your workflow.</p>"
msgid "<p>Rec.2020 is the up-and-coming replacement for the thoroughly outdated sRGB color space. As of June 2015, very few (if any) display devices (and certainly no affordable display devices) can display all of Rec.2020. However, display technology is closing in on Rec.2020, movies are already being made for Rec.2020, and various cameras offer support for Rec.2020. And in the digital darkroom Rec.2020 is much more suitable as a general RGB working space than the exceedingly small sRGB color space.</p>"
"<p>Hewlett-Packard and Microsoft designed sRGB to match the color gamut of consumer-grade CRTs from the 1990s. sRGB is the standard color space for the world wide web and is still the best choice for exporting images to the internet.</p>"
"<p>The sRGB color gamut was a good match to calibrated decent quality CRTs. But sRGB is not a good match to many consumer-grade LCD monitors, which often cannot display the more saturated sRGB blues and magentas (the good news: as technology progresses, wider gamuts are trickling down to consumer grade monitors).</p>"
"<p>Printer color gamuts can easily exceed the sRGB color gamut in cyans, greens, and yellow-greens. Colors from interpolated camera raw files also often exceed the sRGB color gamut.</p>"
"<p>As a very relevant aside, using perceptual intent when converting to sRGB does not magically makes otherwise out of gamut colors fit inside the sRGB color gamut! The standard sRGB color space (along with all the other the RGB profiles provided in my profile pack) is a matrix profile, and matrix profiles don't have perceptual intent tables.</p>"
"<p>To avoid possible copyright infringement issues, I used 'WideRGB' as the base name for these profiles.</p>"
"<p>WideGamutRGB was designed by Adobe to be a wide gamut color space that uses spectral colors as its primaries. Pascale's primary values produce a profile that matches old V2 Widegamut profiles from Adobe and Canon. It is an interesting color space, but shortly after its introduction, Adobe switched their emphasis to the ProPhotoRGB color space.</p>"
msgid "<p>These profiles are for use with RGB images that have been converted to monotone gray (black and white). The main reason to convert from RGB to Gray is to save the file space needed to encode the image. Google places a premium on fast-loading web pages, and images are one of the slower-loading elements of a web page. So converting black and white images to Grayscale images does save some kilobytes. For grayscale images uploaded to the internet, convert the image to the V2 Gray profile with the sRGB TRC.</p>"
msgid "<p>The profiles that end in '-g10.icc' are linear gamma (gamma=1.0, 'linear light', etc) profiles and should only be used when editing at high bit depths (16-bit floating point, 16-bit integer, 32-bit floating point, 32-bit integer). Many editing operations produce better results in linear gamma color spaces.</p>"
msgid "<p>The profiles that end in '-labl.icc' have perceptually uniform TRCs. A few editing operations really should be done on perceptually uniform RGB. Make sure you use the V4 versions for editing high bit depth images.</p>"
msgid "<p>The profiles that end in '-srgbtrc.icc', '-g22.icc', and '-rec709.icc' have approximately but not exactly perceptually uniform TRCs. ProPhotoRGB's gamma=1.8 TRC is not quite as close to being perceptually uniform.</p>"
msgid "<p>When editing 8-bit images, you should use a profile with a small color gamut and an approximately or exactly perceptually uniform TRC. Of the profiles supplied in my profile pack, only the sRGB and AdobeRGB1998 (ClayRGB) color spaces are small enough for 8-bit editing. Even with the AdobeRGB1998 color space you need to be careful to not cause posterization. And of course you cannot use the linear gamma versions of these profiles for 8-bit editing.</p>"
msgid "<p>Use V4 profiles for editing images using high bit depth image editors that use LCMS as the Color Management Module. This includes Krita, digiKam/showFoto, and GIMP 2.9.</p>"
#| msgctxt "@action:button create the new document"
#| msgid "&Create"
msgid "&Create"
msgstr "&Opprett"
#. +> trunk5 stable5
#: libs/ui/widgets/kis_custom_image_widget.cc:278
#, kde-format
msgid ""
"Linear gamma RGB color spaces are not supposed to be used in 8-bit integer modes. It is suggested to use 16-bit integer or any floating point colorspace for linear profiles.\n"
"\n"
"Press \"Ok\" to create a 8-bit integer linear RGB color space or \"Cancel\" to return to the settings dialog."
msgstr ""
#. +> trunk5 stable5
#: libs/ui/widgets/kis_custom_image_widget.cc:513
#, kde-format
msgctxt "arg1: width. arg2: height. arg3: colorspace name. arg4: size of a channel in bits. arg5: image size"
msgid "This document will be %1 pixels by %2 pixels in %3, which means the pixel size is %4 bit. A single paint layer will thus take up %5 of RAM."
#| msgctxt "Symbol for file attachment annotations"
#| msgid "Tag"
msgid "Tag"
msgstr "Merke"
#. +> trunk5 stable5
#: libs/widgets/KoTagFilterWidget.cpp:52
#, kde-format
msgctxt "@info:tooltip"
msgid ""
"<p>Enter search terms here to add resources to, or remove them from, the current tag view.</p>"
"<p>To filter based on the partial, case insensitive name of a resource:<br/>"
"<tt>partialname</tt> or <tt>!partialname</tt></p>"
"<p>To include or exclude other tag sets:<br/>"
"<tt>[Tagname]</tt> or <tt>![Tagname]</tt></p>"
"<p>For case sensitive and full name matching in-/exclusion:<br/>"
"<tt>\"ExactMatch\"</tt> or <tt>!\"ExactMatch\"</tt></p>"
msgstr ""
#. +> trunk5 stable5
#: libs/widgets/KoTagFilterWidget.cpp:62
#, kde-format
msgctxt "@info:tooltip"
msgid "<p>Filter results cannot be saved for the <b>All Presets</b> view. In this view, pressing <b>Enter</b> or clearing the filter box will restore all items. Create and/or switch to a different tag if you want to save filtered resources into named sets.</p>"
msgstr ""
#. +> trunk5 stable5
#: libs/widgets/KoTagFilterWidget.cpp:68
#, kde-format
msgctxt "@info:tooltip"
msgid "<p>Pressing <b>Enter</b> or clicking the <b>Save</b> button will save the changes.</p>"
msgstr ""
#. +> trunk5 stable5
#: libs/widgets/KoTagFilterWidget.cpp:75
#, kde-format
msgid "Search"
msgstr "Søk"
#. +> trunk5 stable5
#: libs/widgets/KoTagFilterWidget.cpp:86
#, kde-format
msgctxt "@info:tooltip"
msgid "<qt>Save the currently filtered set as the new members of the current tag.</qt>"
msgstr "<qt>Lagre det gjeldende filtrerte settet som nye medlemmer av gjeldende etikett.</qt>"
"<html><b>KDE</b> is a world-wide network of software engineers, artists, writers, translators and facilitators who are committed to <a href=\"%1\">Free Software</a> development. This community has created hundreds of Free Software applications as part of the KDE frameworks, workspaces and applications.<br />"
"<br />"
"KDE is a cooperative enterprise in which no single entity controls the efforts or products of KDE to the exclusion of others. Everyone is welcome to join and contribute to KDE, including you.<br />"
"<br />"
"Visit <a href=\"%2\">%2</a> for more information about the KDE community and the software we produce.</html>"
msgstr ""
"<html><b>KDE</b> er et verdensomspennende nettverk av programvareteknikere, kunstnere, forfattere, oversettere og tilretteleggere som er engasjert i utvikling av <a href=\"%1\">fri programvare</a>. Dette fellesskapet har laget hundrevis av frie programmer som del av KDE rammeverk, arbeidsrom og programmer.<br />"
"<br/>"
"KDE er et samarbeidstiltak der intet enkelt firma eller organisasjon kontrollerer KDEs innsats eller produkter slik at andre stenges ute. Alle er velkommen til å være med og bidra.<br />"
"<br />"
"På <a href=\"%2\">%2</a> finner du mer informasjon om KDE-fellesskapet og programvaren vi lager.</html>"
"<html>Software can always be improved, and the KDE team is ready to do so. However, you - the user - must tell us when something does not work as expected or could be done better.<br />"
"<br />"
"KDE has a bug tracking system. Visit <a href=\"%1\">%1</a> or use the \"Report Bug...\" dialog from the \"Help\" menu to report bugs.<br />"
"<br />"
"If you have a suggestion for improvement then you are welcome to use the bug tracking system to register your wish. Make sure you use the severity called \"Wishlist\".</html>"
msgstr ""
"<html>Programvare kan alltid forbedres, og KDE-gruppa er rede til å gjøre det. Likevel må du, brukeren, si fra når noe ikke fungerer som det skal, eller kunne vært bedre.<br />"
"<br />"
"KDE har et oppfølgingssystem for feil. Besøk <a href=\"%1\">%1</a> eller bruk dialogvinduet «Feilrapport» fra «Hjelp»-menyen til å rapportere feil.<br />"
"<br />"
"Hvis du har forslag til forbedringer er du velkommen til å bruke feilrapporteringssystemet for å rapportere ditt ønske. Merk at du må bruke viktighetsgraden «Ønskeliste».</html>"
"<html>You do not have to be a software developer to be a member of the KDE team. You can join the national teams that translate program interfaces. You can provide graphics, themes, sounds, and improved documentation. You decide!<br />"
"<br />"
"Visit <a href=\"%1\">%1</a> for information on some projects in which you can participate.<br />"
"<br />"
"If you need more information or documentation, then a visit to <a href=\"%2\">%2</a> will provide you with what you need.</html>"
"<html>KDE software is and will always be available free of charge, however creating it is not free.<br />"
"<br />"
"To support development the KDE community has formed the KDE e.V., a non-profit organization legally founded in Germany. KDE e.V. represents the KDE community in legal and financial matters. See <a href=\"%1\">%1</a> for information on KDE e.V.<br />"
"<br />"
"KDE benefits from many kinds of contributions, including financial. We use the funds to reimburse members and others for expenses they incur when contributing. Further funds are used for legal support and organizing conferences and meetings. <br />"
" <br />"
"We would like to encourage you to support our efforts with a financial donation, using one of the ways described at <a href=\"%2\">%2</a>.<br />"
"<br />"
"Thank you very much in advance for your support.</html>"
msgstr ""
"<html>KDE-programmene er og vil alltid være tilgjengelige vederlagsfritt, men det koster å utvikle dem.<br />"
"<br />"
"KDE-fellesskapet har derfor opprettet KDE e.V., en ikke-kommersiell organisasjon registrert i Tyskland. KDE e.V. representerer KDE-fellesskapet i juridiske og finansielle saker. På <a href=\"%1\">%1</a> finner du mer om KDE e.V.<br />"
"<br />"
"KDE drar fordel av mange slags bidrag, også pengestøtte. Det meste av midlene brukes til å dekke utgifter som medlemmene pådrar seg ved å bidra til KDE. Midler brukes også til juridisk hjelp og til å organisere konferanser og møter. Det er fint om du også kan bidra. Se <a href=\"%2\">%2</a>for mer informasjon.<br />"
"<p>Please read <b><a href=\"https://docs.krita.org/en/untranslatable_pages/reporting_bugs.html\">this guide</a></b> for reporting bugs first!</p>"
"<p>To submit a bug report, click on the button below. This will open a web browser window on <a href=\"http://bugs.kde.org\">http://bugs.kde.org</a> where you will find a form to fill in. The information displayed above will be transferred to that server.</p>"
msgid "Here you can see a list of key bindings, i.e. associations between actions (e.g. 'Copy') shown in the left column and keys or combination of keys (e.g. Ctrl+V) shown in the right column."
msgstr "Her kan du se en liste over hurtigtaster, dvs tilordninger mellom handlinger (f eks.«Kopier») vist i den venstre kolonnen og taster eller kombinasjoner av slike (f.eks. «CTRL-V») vist i den høyre kolonnen."
#| msgid "Values goes from black to white, or black to the most saturated colour. Saturation, in turn, goes from the most saturated colour to white, grey or black."
msgid "Values goes from black to white, or black to the most saturated color. Saturation, in turn, goes from the most saturated color to white, gray or black."
msgstr "Verdier går fra svart til hvitt, eller svart til den mest mettede fargen. Metning, i sin tur, går fra høyeste metning til hvitt. grått eller svart"
"<p>This sets the gamma value that the linearised HSY Luminosity is crunched with. 1 makes the selector fully linear, 2.2 is a practical default value.</p>"
#| msgctxt "You are about to translate the 'Step' COMMAND, there are some rules on how to translate it.Please see http://edu.kde.org/kturtle/translator.php to learn how to properly translate it."
msgid "The location of FFmpeg is unknown. Please install FFmpeg first: Krita cannot render animations without FFmpeg. (<a href=\"https://www.ffmpeg.org\">www.ffmpeg.org</a>)"
"<p><span style=\" font-weight:600;\">Warning:</span> animated gif images cannot have a framerate higher than 50. The framerate will be reduced to 50 frames per second.</p>"
msgid "Krita tries to automatically check or uncheck this based on the information it can get from the profile you are converting from and the profile you are converting to."
msgid "The icon associated with this action. It is shown alongside text in the menu bar and in toolbars as required. A string to use KDE's image loading system, or a custom QPixmap or QIcon, or None."
msgid "<p>Failed to check version of dependency <application>%1</application>: Module do not have PEP396 <code>__version__</code> attribute. It is not disabled, but behaviour is unpredictable...</p>"
"<p>Select the location of the G'Mic-Qt plugin. You can download the plugin from the <a href=\"http://gmic.eu/\"><span style=\" text-decoration: underline; color:#2980b9;\">G'Mic website</span></a>. Make sure you download the special version for Krita, not the standalone or the GIMP version.</p>"
msgid "The formula decides how the kernel is created, so different formulas choose different values in the kernel, and thus give subtly different results."
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-family:'MS Shell Dlg 2'; font-size:8pt;\">This is a line of text before the inserted text. This is a line of inserted text. This is a line after the inserted text.</span></p>"
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-family:'MS Shell Dlg 2'; font-size:8pt;\">This is a line of text before the deleted text. This is a line of deleted text. This is a line after the deleted text.</span></p>"
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-family:'MS Shell Dlg 2'; font-size:8pt;\">This is a line of text before the format-change text. This is a line of text whose format has been changed. This is a line of text after the format-change text.</span></p>"
"</body></html>"
msgstr ""
"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-family:'MS Shell Dlg 2'; font-size:8pt;\">Dette er en tekstlinje før den innsatte teksten. Dette er en linje innsatt tekst. Dette er en linje etter den innsatte teksten.</span></p>"
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-family:'MS Shell Dlg 2'; font-size:8pt;\">Dette er en tekstlinje før den teksten som er slettet. Dette er en linje med slettet tekst. Dette er en linje etter den teksten som er slettet.</span></p>"
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-family:'MS Shell Dlg 2'; font-size:8pt;\">Dette er en linje foran den tekstensom har fått endret format. Dette er en linje med tekst som har fått endret format. Dette er en linje tekst etter den teksten som har endret format.</span></p>"
"<p style=\" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">It is possible to assign a named style to text and alter the style properties to change all text with that style.</p>"
"\n"
"<p style=\" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Applying a style change will reformat all text that previously got the named style assigned to it. Use the Styles docker to apply styles to text.</p>"
"</body></html>"
msgstr ""
"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
"<p style=\" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Det er mulig å tilordne en navngitt stil til tekst og endre stilegenskapene slik at all tekst med den stilen blir endret.</p>"
"\n"
"<p style=\" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Når en stilendring tas i bruk blir all tekst omformattert som tidligere har fått den stilen tilordnet. Bruk Stil-dokkeren til å bruke stiler på tekst.</p>"
"The image contains pixels with zero alpha channel and non-zero color channels. Krita has modified those pixels to have at least some alpha. The initial values will <i>not</i> be reverted on saving the image back.<br/>"
"<br/>"
"This will hardly make any visual difference just keep it in mind."
msgstr ""
#. +> trunk5 stable5
#: plugins/impex/exr/exr_converter.cc:902
#, fuzzy, kde-format
#| msgid "One image has been modified."
#| msgid_plural "%1 images have been modified."
msgctxt "@title:window"
msgid "EXR image has been modified"
msgstr "Ett bilde er endret."
#. +> trunk5 stable5
#: plugins/impex/exr/exr_converter.cc:1302
#, kde-format
msgctxt "@item:unsupported-node-message"
msgid "%1 (type: \"%2\")"
msgstr "%1 (type; «%2»)"
#. +> trunk5 stable5
#: plugins/impex/exr/exr_converter.cc:1307
#, fuzzy, kde-format
#| msgctxt "@info"
#| msgid ""
#| "<para>The following layers have a type that is not supported by EXR format:</para>"
#| "<para>"
#| "<list>%1</list>"
#| "</para>"
#| "<para><warning>these layers will NOT be saved to the final EXR file</warning></para>"
msgctxt "@info"
msgid ""
"<p>The following layers have a type that is not supported by EXR format:</p>"
"<r>"
"<ul>%1</ul>"
"</p>"
"<p><warning>these layers have <b>not</b> been saved to the final EXR file</warning></p>"
msgstr ""
"<para>Følgende lag har en type som ikke støttes av EXR-formatet:</para>"
"<para>"
"<list>%1</list>"
"</para>"
"<para><warning>disse lagene blir IKKE lagret til den endelige EXR-fila</warning></para>"
msgid "This option will merge all layers. It is advisable to check this option, otherwise other applications might not be able to read your file correctly."
msgstr "Dette valget slår sammen alle lagene. Dette bør krysses av, ellers vil andre programmer kanskje ikke kunne lese fila riktig."
"<p>These settings determine how much information is lost during compression. Low: small files, bad quality. High: big files, good quality.</p>"
"</body></html>"
msgstr ""
"<html><head/><body> "
"<p>Disse innstillingene bestemmer hvor mye informasjon som går tapt i komprimeringen. Lav: små filer, dårlig kvalitet. Høy: store filer, god kvalitet.</p>"
"<p><span style=\" font-weight:600;\">PNG</span> files have <span style=\" font-style:italic;\">two</span> options to save <span style=\" font-weight:600;\">sRGB</span> information: as a tag or as an explicit profile. For use with in websites, <span style=\" font-style:italic;\">disable</span> this option. For interchange with other applications, <span style=\" font-style:italic;\">enable</span> this option.</p>"
"</body></html>"
msgstr ""
"<html><head/><body>"
"<p><span style=\" font-weight:600;\">PNG</span>-filer har <span style=\"font-style:italic;\">to</span> muligheter til å lagre <span style=\" font-weight:600;\">sRGB</span>-informasjon: som en etikett eller som en uttrykkelig profil. <span style=\" font-style:italic;\">Slå av</span> dette valget for bruk med nettsider. <span style=\" font-style:italic;\">Slå på</span> dette valget for utveksling med andre programmer.</p>"
msgid "Indexed PNG images are smaller. If you enabled this option, your image will be analyzed to see whether it is possible to save as an indexed PNG."
msgstr "Indekserte PNG-bilder er mindre. Hvis du slo på dette valget, så blir bildet analysert for å se om det er mulig å lagre det som indeksert PNG."
#| "<para>If enabled, all RAW files will be decoded in 16-bit color depth using a linear gamma curve. To prevent dark picture rendering in the editor, it is recommended to use Color Management in this mode.</para>"
#| "<para>If disabled, all RAW files will be decoded in 8-bit color depth with a BT.709 gamma curve and a 99th-percentile white point. This mode is faster than 16-bit decoding.</para>"
msgctxt "@info:whatsthis"
msgid ""
"<p>If enabled, all RAW files will be decoded in 16-bit color depth using a linear gamma curve. To prevent dark picture rendering in the editor, it is recommended to use Color Management in this mode.</p>"
"<p>If disabled, all RAW files will be decoded in 8-bit color depth with a BT.709 gamma curve and a 99th-percentile white point. This mode is faster than 16-bit decoding.</p>"
msgstr ""
"<para>Hvis dette er slått på blir alle RAW-filer avkodet i 16-bit fargedybde ved bruk av en lineær gammakurve. Det anbefales å bruke Fargestyring i denne kjøremåten for å unngå mørk bildeopptegning i redigeringen.</para>"
"<para>Hvis dette er slått av blir alle RAWfiler avkodet i 8-bit fargedybde med gammakurve BT.709 og et hvitpunkt i 99-persentil. Denne kjøremåten er raskere enn 16-bit avkoding.</para>"
#| "<title>Interpolate RGB as four colors</title>"
#| "<para>The default is to assume that all green pixels are the same. If even-row green pixels are more sensitive to ultraviolet light than odd-row this difference causes a mesh pattern in the output; using this option solves this problem with minimal loss of detail.</para>"
#| "<para>To resume, this option blurs the image a little, but it eliminates false 2x2 mesh patterns with VNG quality method or mazes with AHD quality method.</para>"
msgctxt "@info:whatsthis"
msgid ""
"<title>Interpolate RGB as four colors</title>"
"<p>The default is to assume that all green pixels are the same. If even-row green pixels are more sensitive to ultraviolet light than odd-row this difference causes a mesh pattern in the output; using this option solves this problem with minimal loss of detail.</p>"
"<p>To resume, this option blurs the image a little, but it eliminates false 2x2 mesh patterns with VNG quality method or mazes with AHD quality method.</p>"
msgstr ""
"<title>Interpoler RGB som fire farger</title>"
"<para> Standard er å anta at alle grønne piksler er like. Hvis grønne piksler i partallsrader er mer følsomme for ultrafiolett lys enn oddetallsrader gir denne forskjellen et gittermønster i utdata. Dette valget løser dette problemet med minimalt tap av detaljer.</para>"
"<para> Dette valget slører altså bildet litt, men eliminerer falske 2x2 gittermønster med VNG-kvalitetsmetoden eller labyrinter med AHD-kvalitetsmetoden.</para>"
#| "<title>Do not stretch or rotate pixels</title>"
#| "<para>For Fuji Super CCD cameras, show the image tilted 45 degrees. For cameras with non-square pixels, do not stretch the image to its correct aspect ratio. In any case, this option guarantees that each output pixel corresponds to one RAW pixel.</para>"
msgctxt "@info:whatsthis"
msgid ""
"<title>Do not stretch or rotate pixels</title>"
"<p>For Fuji Super CCD cameras, show the image tilted 45 degrees. For cameras with non-square pixels, do not stretch the image to its correct aspect ratio. In any case, this option guarantees that each output pixel corresponds to one RAW pixel.</p>"
msgstr ""
"<title>Ikke strekk eller roter piksler</title>"
"<para>For Fuji Super CCD-kameraer vises bildet vippet 45 grader. For kameraer med ikke-kvadratiske piksler strekkes ikke bildet til riktig høyde/breddeforhold. I alle tilfeller garanterer dette valget at hvert piksel i utdata tilsvarer ett RAW-piksel.</para>"
#| "<para>Select here the demosaicing method to use when decoding RAW images. A demosaicing algorithm is a digital image process used to interpolate a complete image from the partial raw data received from the color-filtered image sensor, internal to many digital cameras, in form of a matrix of colored pixels. Also known as CFA interpolation or color reconstruction, another common spelling is demosaicing. The following methods are available for demosaicing RAW images:</para>"
#| "<para>"
#| "<list>"
#| "<item><emphasis strong='true'>Bilinear</emphasis>: use high-speed but low-quality bilinear interpolation (default - for slow computers). In this method, the red value of a non-red pixel is computed as the average of the adjacent red pixels, and similarly for blue and green.</item>"
#| "<item><emphasis strong='true'>VNG</emphasis>: use Variable Number of Gradients interpolation. This method computes gradients near the pixel of interest and uses the lower gradients (representing smoother and more similar parts of the image) to make an estimate.</item>"
#| "<item><emphasis strong='true'>PPG</emphasis>: use Patterned-Pixel-Grouping interpolation. Pixel Grouping uses assumptions about natural scenery in making estimates. It has fewer color artifacts on natural images than the Variable Number of Gradients method.</item>"
#| "<item><emphasis strong='true'>AHD</emphasis>: use Adaptive Homogeneity-Directed interpolation. This method selects the direction of interpolation so as to maximize a homogeneity metric, thus typically minimizing color artifacts.</item>"
#| "<item><emphasis strong='true'>DCB</emphasis>: DCB interpolation from linuxphoto.org project.</item>"
#| "<item><emphasis strong='true'>AHD v2</emphasis>: modified AHD interpolation using Variance of Color Differences method.</item>"
#| "<item><emphasis strong='true'>AFD</emphasis>: Adaptive Filtered Demosaicing interpolation through 5 pass median filter from PerfectRaw project.</item>"
#| "<item><emphasis strong='true'>VCD</emphasis>: Variance of Color Differences interpolation.</item>"
#| "<item><emphasis strong='true'>VCD & AHD</emphasis>: Mixed demosaicing between VCD and AHD.</item>"
#| "<item><emphasis strong='true'>LMMSE</emphasis>: color demosaicing via directional linear minimum mean-square error estimation interpolation from PerfectRaw.</item>"
#| "<item><emphasis strong='true'>AMaZE</emphasis>: Aliasing Minimization interpolation and Zipper Elimination to apply color aberration removal from RawTherapee project.</item>"
#| "</list>"
#| "</para>"
#| "<para>Note: some methods can be unavailable if RAW decoder have been built without extension packs.</para>"
msgctxt "@info:whatsthis"
msgid ""
"<title>Quality (interpolation)</title>"
"<p>Select here the demosaicing method to use when decoding RAW images. A demosaicing algorithm is a digital image process used to interpolate a complete image from the partial raw data received from the color-filtered image sensor, internal to many digital cameras, in form of a matrix of colored pixels. Also known as CFA interpolation or color reconstruction, another common spelling is demosaicing. The following methods are available for demosaicing RAW images:</p>"
"<p>"
"<ul>"
"<li><emphasis strong='true'>Bilinear</emphasis>: use high-speed but low-quality bilinear interpolation (default - for slow computers). In this method, the red value of a non-red pixel is computed as the average of the adjacent red pixels, and similarly for blue and green.</li>"
"<li><emphasis strong='true'>VNG</emphasis>: use Variable Number of Gradients interpolation. This method computes gradients near the pixel of interest and uses the lower gradients (representing smoother and more similar parts of the image) to make an estimate.</li>"
"<li><emphasis strong='true'>PPG</emphasis>: use Patterned-Pixel-Grouping interpolation. Pixel Grouping uses assumptions about natural scenery in making estimates. It has fewer color artifacts on natural images than the Variable Number of Gradients method.</li>"
"<li><emphasis strong='true'>AHD</emphasis>: use Adaptive Homogeneity-Directed interpolation. This method selects the direction of interpolation so as to maximize a homogeneity metric, thus typically minimizing color artifacts.</li>"
"<li><emphasis strong='true'>DCB</emphasis>: DCB interpolation from linuxphoto.org project.</li>"
"<li><emphasis strong='true'>AHD v2</emphasis>: modified AHD interpolation using Variance of Color Differences method.</li>"
"<li><emphasis strong='true'>AFD</emphasis>: Adaptive Filtered Demosaicing interpolation through 5 pass median filter from PerfectRaw project.</li>"
"<li><emphasis strong='true'>VCD</emphasis>: Variance of Color Differences interpolation.</li>"
"<li><emphasis strong='true'>VCD & AHD</emphasis>: Mixed demosaicing between VCD and AHD.</li>"
"<li><emphasis strong='true'>LMMSE</emphasis>: color demosaicing via directional linear minimum mean-square error estimation interpolation from PerfectRaw.</li>"
"<li><emphasis strong='true'>AMaZE</emphasis>: Aliasing Minimization interpolation and Zipper Elimination to apply color aberration removal from RawTherapee project.</li>"
"</ul>"
"</p>"
"<p>Note: some methods can be unavailable if RAW decoder have been built without extension packs.</p>"
msgstr ""
"<title>Kvalitet (interpolering)</title>"
"<para>Velg her interpoleringsmetode for invers mosaikk-operasjon på RAW-bildeavkoding. En algoritme for invers mosaikk er en digital bildeprosess som brukes til å interpolere et komplett bilde ut fra delvise rådata som mottas fra den fargefiltrerte bildesensoren inni mange digitalkameraer i form av en matrise av fargepiksler. Invers mosaikk-operasjon kalles også CFA-interpolasjon eller fargerekonstruksjon. Se nedenfor metoder til invers mosaikk-operasjon på RAW-bilder:</para>"
"<para> "
"<list>"
"<item><emphasis strong='true'>Bilineær</emphasis>: bruk bilineær interpolasjon, som er rask men gir lav kvalitet (standard for langsomme maskiner). Med denne metoden beregnes rød-verdien for et ikke-rødt piksel som gjennomsnittet av røde nabopiksler, tilsvarende for blått og grønt.</item>"
"<item><emphasis strong='true'>VNG</emphasis>: bruk interpolasjon med variabelt antall gradienter. Denne metoden beregner gradienter nær pikslet som betraktes og bruker lavere gradienter, som representerer jevnere og mer liknende områder i bildet, til å lage et estimat.</item>"
"<item><emphasis strong='true'>PPG</emphasis>: bruk «Patterned Pixel Grouping»-interpolasjon. Pikselgruppering bruker antakelser om naturbilder til å lage estimater. Det gir færre fargeartefakter på naturbilder enn metoden med variable gradienter.</item>"
"<item><emphasis strong='true'>AHD</emphasis>: bruk adaptiv homogenitet-rettet interpolasjon. Denne metoden velger interpolasjonsretning slik at den maksimerer et homogenitetsmål, og derved minimerer fargeartefakter.</item>"
"<item><emphasis strong='true'>DCB</emphasis>: DCB-interpolasjon from prosjektet linuxphoto.org.</item>"
"<item><emphasis strong='true'>AHD v2</emphasis>: modifisert AHD-interpolasjon ved bruk av metoden Variance of Color Differences.</item>"
"<item><emphasis strong='true'>AFD</emphasis>: Adaptive Filtered Demosaicing interpolasjon gjennom et 5-pass medianfilter fra PerfectRaw-e.</item>"
"<item><emphasis strong='true'>VCD</emphasis>: Variance of Color Differences-interpolasjon.</item>"
"<item><emphasis strong='true'>VCD & AHD</emphasis>: Blandet mosaikkfjerning mellom VCD og AHD.</item>"
"<item><emphasis strong='true'>LMMSE</emphasis>: fargemosaikkfjerning via retningsbestemt «linear minimum mean square-error» anslagsinterpolasjon fra PerfectRaw.</item>"
"<item><emphasis strong='true'>AMaZE</emphasis>: Aliasing Minimization interpolasjon og Zipper-Eliminering som fjerner fargeavvik, fra prosjektet RawTherapee project.</item>"
"</list>"
" </para>"
" "
"<para>Merk: noen metoder kan være utilgjengelige hvis RAW-avkoderen er bygget uten utvidelsespakker.</para>"
#| "<para>Set here the passes used by the median filter applied after interpolation to Red-Green and Blue-Green channels.</para>"
#| "<para>This setting is only available for specific Quality options: <emphasis strong='true'>Bilinear</emphasis>, <emphasis strong='true'>VNG</emphasis>, <emphasis strong='true'>PPG</emphasis>, <emphasis strong='true'>AHD</emphasis>, <emphasis strong='true'>DCB</emphasis>, and <emphasis strong='true'>VCD & AHD</emphasis>.</para>"
msgctxt "@info:whatsthis"
msgid ""
"<title>Pass</title>"
"<p>Set here the passes used by the median filter applied after interpolation to Red-Green and Blue-Green channels.</p>"
"<p>This setting is only available for specific Quality options: <emphasis strong='true'>Bilinear</emphasis>, <emphasis strong='true'>VNG</emphasis>, <emphasis strong='true'>PPG</emphasis>, <emphasis strong='true'>AHD</emphasis>, <emphasis strong='true'>DCB</emphasis>, and <emphasis strong='true'>VCD & AHD</emphasis>.</p>"
msgstr ""
"<title>Pass</title>"
"<para>Angi her passene som medianfilteret bruker etter interpolasjon til Rød-Grønn og Blå-Grønn-kanaler.</para>"
"<para>Denne innstillingen er bare tilgjengelig for spesielle Kvalitet-valg:<emphasis strong='true'>Bilineær</emphasis>, <emphasis strong='true'>VNG</emphasis>, <emphasis strong='true'>PPG</emphasis>, <emphasis strong='true'>AHD</emphasis>, <emphasis strong='true'>DCB</emphasis> og <emphasis strong='true'>VCD & AHD</emphasis>.</para>"
#| "<para>Configure the raw white balance:</para>"
#| "<para>"
#| "<list>"
#| "<item><emphasis strong='true'>Default D65</emphasis>: Use a standard daylight D65 white balance.</item>"
#| "<item><emphasis strong='true'>Camera</emphasis>: Use the white balance specified by the camera. If not available, reverts to default neutral white balance.</item>"
#| "<item><emphasis strong='true'>Automatic</emphasis>: Calculates an automatic white balance averaging the entire image.</item>"
#| "<item><emphasis strong='true'>Manual</emphasis>: Set a custom temperature and green level values.</item>"
#| "</list>"
#| "</para>"
msgctxt "@info:whatsthis"
msgid ""
"<title>White Balance</title>"
"<p>Configure the raw white balance:</p>"
"<p>"
"<ul>"
"<li><emphasis strong='true'>Default D65</emphasis>: Use a standard daylight D65 white balance.</li>"
"<li><emphasis strong='true'>Camera</emphasis>: Use the white balance specified by the camera. If not available, reverts to default neutral white balance.</li>"
"<li><emphasis strong='true'>Automatic</emphasis>: Calculates an automatic white balance averaging the entire image.</li>"
"<li><emphasis strong='true'>Manual</emphasis>: Set a custom temperature and green level values.</li>"
"</ul>"
"</p>"
msgstr ""
"<title>Hvitbalanse</title>"
"<para>Sett opp RAW hvitbalanse:</para>"
" "
"<para> "
"<list>"
"<item><emphasis strong='true'>Standard D65 hvitbalanse</emphasis>: Bruk en standard dagslys D65 hvitbalanse.</item>"
"<item><emphasis strong='true'>Kamera</emphasis>: Bruk hvitbalansen som kameraet oppgir. Hvis dette ikke finnes,faller dcraw tilbake til standard nøytral hvitbalanse.</item>"
"<item><emphasis strong='true'>Automatisk</emphasis>: Beregner en automatisk hvitbalanse med gjennomsnitt over hele bildet. </item>"
"<item><emphasis strong='true'>Manuelt</emphasis>: Oppgi selvvalgt temperatur og verdi på grønn-nivået.</item>"
#| "<para>Amount of highlight preservation for exposure correction before interpolation in E.V. Only take effect if Shift Correction is > 1.0 E.V</para>"
msgctxt "@info:whatsthis"
msgid ""
"<title>Highlight</title>"
"<p>Amount of highlight preservation for exposure correction before interpolation in E.V. Only take effect if Shift Correction is > 1.0 E.V</p>"
msgstr ""
"<title>Høylys</title>"
"<para>Hvor mye høylys skal bevares ved eksponeringskorreksjon før interpolasjon i E.V. Får bare virkning hvis Shift-korreksjonen er > 1.0 E.V</para>"
#| msgid "<para>If enabled, images with overblown channels are processed much more accurately, without 'pink clouds' (and blue highlights under tungsten lamps).</para>"
msgctxt "@info:whatsthis"
msgid "<p>If enabled, images with overblown channels are processed much more accurately, without 'pink clouds' (and blue highlights under tungsten lamps).</p>"
msgstr "<para>Hvis dette er slått på vil bilder med oppblåste kanaler behandlet mye mer nøyaktig, uten «lyserøde skyer» (og blå høylys under glødelamper).</para>"
#| "<para>Use a specific black point value to decode RAW pictures. If you set this option to off, the Black Point value will be automatically computed.</para>"
msgctxt "@info:whatsthis"
msgid ""
"<title>Black point</title>"
"<p>Use a specific black point value to decode RAW pictures. If you set this option to off, the Black Point value will be automatically computed.</p>"
msgstr ""
"<title>Svart punkt</title>"
"<para>Bruk en bestemt svartpunktverdi for å avkode RAW-bilder. Hvis dette er slått av blir svartpunktverdien beregnet automatisk.</para>"
#| "<para>Use a specific white point value to decode RAW pictures. If you set this option to off, the White Point value will be automatically computed.</para>"
msgctxt "@info:whatsthis"
msgid ""
"<title>White point</title>"
"<p>Use a specific white point value to decode RAW pictures. If you set this option to off, the White Point value will be automatically computed.</p>"
msgstr ""
"<title>Hvitt punkt</title>"
"<para>Bruk en bestemt hvitpunktverdi for å avkode RAW-bilder. Hvis dette er slått av blir hvitpunktverdien beregnet automatisk.</para>"
#| "<para>Select here the noise reduction method to apply during RAW decoding.</para>"
#| "<para>"
#| "<list>"
#| "<item><emphasis strong='true'>None</emphasis>: no noise reduction.</item>"
#| "<item><emphasis strong='true'>Wavelets</emphasis>: wavelets correction to erase noise while preserving real detail. It's applied after interpolation.</item>"
#| "<item><emphasis strong='true'>FBDD</emphasis>: Fake Before Demosaicing Denoising noise reduction. It's applied before interpolation.</item>"
#| "<item><emphasis strong='true'>CFA Line Denoise</emphasis>: Banding noise suppression. It's applied after interpolation.</item>"
"<p>Select here the noise reduction method to apply during RAW decoding.</p>"
"<p>"
"<ul>"
"<li><emphasis strong='true'>None</emphasis>: no noise reduction.</li>"
"<li><emphasis strong='true'>Wavelets</emphasis>: wavelets correction to erase noise while preserving real detail. It's applied after interpolation.</li>"
"<li><emphasis strong='true'>FBDD</emphasis>: Fake Before Demosaicing Denoising noise reduction. It's applied before interpolation.</li>"
"<li><emphasis strong='true'>CFA Line Denoise</emphasis>: Banding noise suppression. It's applied after interpolation.</li>"
"<li><emphasis strong='true'>Impulse Denoise</emphasis>: Impulse noise suppression. It's applied after interpolation.</li>"
"</ul>"
"</p>"
msgstr ""
"<title>Støyreduksjon</title>"
"<para>Velg her støyreduksjonsmetode som skal brukes under RAW-avkoding.</para>"
" "
"<para> "
"<list>"
"<item><emphasis strong='true'>Ingen</emphasis>: ingen støyreduksjon.</item>"
"<item><emphasis strong='true'>Wavelets</emphasis>: wavelet-korrigering for å viske ut støy mens virkelige detaljer bevares. Det brukes etter interpolasjon.</item>"
"<item><emphasis strong='true'>FBDD</emphasis>: Fake Before Demosaicing Denoising, denne støyreduksjonen brukes før interpolasjon. </item>"
"<item><emphasis strong='true'>CFA linjestøyfjerning</emphasis>: Båndvis støyfjerning. Den brukes etter interpolasjon.</item>"
"<item><emphasis strong='true'>Impuls-støyfjerning</emphasis>: Impuls-støyfjerning, brukes etter interpolasjon.</item>"
#| "<para>If this option is turned on, it will try to shift image channels slightly and evaluate Chromatic Aberration change. Note that if you shot blue-red pattern, the method may fail. In this case, disable this option and tune manually color factors.</para>"
"<p>If this option is turned on, it will try to shift image channels slightly and evaluate Chromatic Aberration change. Note that if you shot blue-red pattern, the method may fail. In this case, disable this option and tune manually color factors.</p>"
msgstr ""
"<title>Automatisk korreksjon for kromatisk avvik</title>"
"<para>Hvis dette er slått på vil systemet forsøke å forskyve bildekanalene litt og beregne endring i kromatisk avvik. Merk at denne metoden kan svikte hvis du fotograferte et blått-rødt mønster. I så fall slås dette valget av, og still inn fargefaktorer manuelt.</para>"
#| "<para>Select here the output color space used to decode RAW data.</para>"
#| "<para>"
#| "<list>"
#| "<item><emphasis strong='true'>Raw (linear)</emphasis>: in this mode, no output color space is used during RAW decoding.</item>"
#| "<item><emphasis strong='true'>sRGB</emphasis>: this is an RGB color space, created cooperatively by Hewlett-Packard and Microsoft. It is the best choice for images destined for the Web and portrait photography.</item>"
#| "<item><emphasis strong='true'>Adobe RGB</emphasis>: this color space is an extended RGB color space, developed by Adobe. It is used for photography applications such as advertising and fine art.</item>"
#| "<item><emphasis strong='true'>Wide Gamut</emphasis>: this color space is an expanded version of the Adobe RGB color space.</item>"
#| "<item><emphasis strong='true'>Pro-Photo</emphasis>: this color space is an RGB color space, developed by Kodak, that offers an especially large gamut designed for use with photographic outputs in mind.</item>"
#| "<item><emphasis strong='true'>Custom</emphasis>: use a custom output color space profile.</item>"
#| "</list>"
#| "</para>"
msgctxt "@info:whatsthis"
msgid ""
"<title>Workspace</title>"
"<p>Select here the output color space used to decode RAW data.</p>"
"<p>"
"<ul>"
"<li><emphasis strong='true'>Raw (no profile)</emphasis>: in this mode, no output color space is used during RAW decoding.</li>"
"<li><emphasis strong='true'>sRGB</emphasis>: this is an RGB color space, created cooperatively by Hewlett-Packard and Microsoft. It is the best choice for images destined for the Web and portrait photography.</li>"
"<li><emphasis strong='true'>Adobe RGB</emphasis>: this color space is an extended RGB color space, developed by Adobe. It is used for photography applications such as advertising and fine art.</li>"
"<li><emphasis strong='true'>Wide Gamut</emphasis>: this color space is an expanded version of the Adobe RGB color space.</li>"
"<li><emphasis strong='true'>Pro-Photo</emphasis>: this color space is an RGB color space, developed by Kodak, that offers an especially large gamut designed for use with photographic outputs in mind.</li>"
"<li><emphasis strong='true'>Custom</emphasis>: use a custom output color space profile.</li>"
"</ul>"
"</p>"
msgstr ""
"<title>Arbeidsrom</title>"
"<para>Velg her resultatfargerom som skal brukes til å avkode RAW-data.</para>"
" "
"<para> "
"<list>"
"<item><emphasis strong='true'>Rå (lineær)</emphasis>: på denne måten brukes ikke noe fargerom under avkoding.</item>"
"<item><emphasis strong='true'>sRGB</emphasis>: dette er et RGB-fargerom laget i samarbeid av Hewlett-Packard og Microsoft. Det er det beste valget for bilder som skal vises på veven og for portrettfotografi.</item>"
"<item><emphasis strong='true'>Adobe RGB</emphasis>: dette er et utvidet RGB-fargerom som er utviklet av Adobe. Det brukes til kunstfotografering og reklamefoto.</item>"
"<item><emphasis strong='true'>Bredt område</emphasis>: dette fargerommet er en utvidet versjon av fargerommet Adobe RGB.</item>"
"<item><emphasis strong='true'>Pro-Photo</emphasis>: dette er et RGB-fargerom utviklet av Kodak, som tilbyr et ekstra bredt område laget med tanke på bruk med fotografi.</item>"
"<item><emphasis strong='true'>Egendefinert</emphasis>: bruk et egendefinert resultatfargerom.</item>"
msgid "This brush has transparent pixels in its center. \"Dulling\" mode may give unstable results. Consider using \"Smearing\" mode instead."
msgstr "Denne penselen har gjennomsiktige piksler i midten. \"Matting\"-metoden kan gi ustabile resultater. Kanskje \"utsmøring\" bør brukes i stedet."
msgid "This determines every interval after which the precision should change. For example: if the delta value is set to be 15.00, after every 15 pts change in the size of brush, the precision will change."
msgstr "Dette bestemmer intervallene der presisjonen skal endres. For eksempel: hvis delta-verdien er satt til 15, så vil presisjonen endres hver gang penselstørrelsen endres med 15 punkter."
msgid "If checked, grid brush fill every particle's background with background color. The background of particle is rectangle of grid width and height and by default it is transparent."
msgstr "Hvis dette er krysset av vil rutenettpenselen fylle bakgrunnen for hver partikkel med bakgrunnsfargen. Bakgrunnen for partikkelen er et rektangel med rutehøyde og rutebredde og er som standard gjennomsiktig."
"<p><b>Painting mode</b>: Krita offers a choice between two painting modes: <i>buildup</i> and <i>wash</i>. The first choice builds up color while painting in one stroke, the second choices gives you an even color in one stroke even if you go over the same place again and again.</p>"
"</html>"
msgstr ""
"<html>\n"
"<p><b>Malemåte</b>: Krita tilbyr et valg mellom to malemåter : <i>bygg opp</i> and <i>vask</i>. Det første valget bygger opp farge under maling i ett strøk, det andre valget gir en jevn farge i ett strøk selv om du maler over det samme stedet flere ganger.</p>"
"Use to set the interval at which the Automatic Precision will change. \n"
"The Precision will decrease as brush size increases."
msgstr "Bruk dette til å bestemme intervallet der den automatiske presisjonsinnstillingen skal endres. Presisjonen blir mindre etter som penselstørelsen øker."
msgid "These are keywords that can be used to identify text layers. A layer only needs to contain the keyword to be recognized. Keywords should be comma separated."
msgid "These are keywords that can be used to identify panel layers. A layer only needs to contain the keyword to be recognized. Keywords should be comma separated."
msgid "By default this will be filled with a generated universal unique identifier. The ID by itself is merely so that comic book library management programs can figure out if this particular comic is already in their database and whether it has been rated. Of course, the UUID can be changed into something else by manually changing the JSON, but this is advanced usage."
msgid "The genre of the work. Prefilled values are from the ACBF, but you can fill in your own. Separate genres with commas. Try to limit the amount to about two or three."
msgid "The following is a table of the authors that contributed to this comic. You can set their nickname, proper names (first, middle, last), role (penciller, inker, etc), email and homepage."
msgid "If there is an entry in a comics data base, that should be added here. It is unlikely to be a factor for comics from scratch, but useful when doing a conversion."
msgid "Whether the comic is an adaption of an existing source, and if so, how to find information about that source. So for example, for an adapted webcomic, the official website url should go here."
msgid "Krita doesn't have write access to this folder, so new files cannot be made. Please configure the folder access or move the project to a folder that can be written to."
msgid "The location for extra autocompletion keys in the metadata editor. Point this at a folder containing key_characters/key_format/key_genre/key_rating/key_author_roles/key_other with inside txt files (csv for rating) containing the extra auto-completion keys, each on a new line. This path is stored in the Krita configuration, and not the project configuration."
"This allows you to make a template document with guides.\n"
"The width and height are the size of the live-area, the safe area is the live area minus the margins, and the full image is the live area plus the bleeds."
"<p>Your name for your script. This is used to calculate the name of your package, the name of the class in your package and the associated directory.</p>"
"<p>What you want to appear in the Tools-> Scripts menu. If you leave this blank a default entry will be created based on the name of the script. </p>"
"<p>If this is checked your script will be automatically enabled in Krita. That is, it will show up in the Scripts menu or docker list. If not, you will need to manually enable the script through the Krita->Settings menu entry. </p>"
msgid "<nobr>Blending controls the percentage of color that is picked</nobr> and mixed with your current brush color. A full blending value picks colors completely, ignoring brush color."
"<p>In \"Global Coordinates\" mode Width and Height fields show the size of the shape's bounding box in image-aligned coordinates, even when the shape is rotated or has any other transform. </p>"
"<p>If \"Global Coordinates\" mode is disabled, Width and Height fields show the shape's \"local\" size, before application of any transformations.</p>"
msgid "Sorry, Krita was built without the support of GNU Scientific Library, so you cannot scale the selection with handles. Please compile Krita with GNU Scientific Library support, or use options widget for editing scale values manually."
msgstr "Krita ble bygget uten støtte for GNU Scientific Library, så du kan ikke skalere utvalget med håndtak. Kompiler Krita med støtte for GNU Scientific Library, eller bruk valg-elementet for å redigere skalaverdier manuelt."
msgid "Switch between Build Up and Wash mode of painting. Build Up mode adds deformations one on top of the other without any limits. Wash mode gradually deforms the piece to the selected deformation level."
msgstr "Bytt mellom malemetodene Bygg opp og Vask. Bygg opp legger på deformasjoner oppå hverandre uten grenser. Vaskemodus deformerer gradvis til det valgte deformeringsnivået."
msgid "If you press the <interface>Convert</interface> button, all bytes in the selected range will be replaced by bytes which represent the same character in the selected target charset."
msgstr "Hvis du trykker <interface>Konverter</interface>-knappen blir alle byter i det markerte området erstattet med byter som gjengir det samme tegnet i det valgte mål-tegnsettet."
msgctxt "@title:window of the tool to calculate checksums"
msgid "Checksum"
msgstr "Sjekksum"
#. +> trunk5 stable5
#: controllers/view/checksum/checksumview.cpp:58
#, kde-format
msgctxt "@label:listbox algorithm to use for the checksum"
msgid "Algorithm:"
msgstr "Algoritme:"
#. +> trunk5 stable5
#: controllers/view/checksum/checksumview.cpp:65
#, kde-format
msgctxt "@info:whatsthis"
msgid "Select the algorithm to use for the checksum."
msgstr "Velg algoritme som skal brukes for sjekksummen."
#. +> trunk5 stable5
#: controllers/view/checksum/checksumview.cpp:87
#, kde-format
msgctxt "@action:button calculate the checksum"
msgid "&Calculate"
msgstr "&Regn ut"
#. +> trunk5 stable5
#: controllers/view/checksum/checksumview.cpp:90
#, kde-format
msgctxt "@info:tooltip"
msgid "Calculate the checksum for the bytes in the selected range."
msgstr "Beregn sjekksum for byter i det valgte området."
#. +> trunk5 stable5
#: controllers/view/checksum/checksumview.cpp:92
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid "If you press the <interface>Calculate</interface> button, the list will be updated to all strings which are contained in the selected range and have the set minimum length."
msgstr "Hvis du trykker <interface>Regn ut</interface>-knappen, blir lista oppdatert til alle strenger som finnes i området og har den oppgitte minstelengden."
msgctxt "@label:listbox operation to use by the filter"
msgid "Operation:"
msgstr "Operasjon:"
#. +> trunk5 stable5
#: controllers/view/filter/filterview.cpp:62
#, kde-format
msgctxt "@info:tooltip"
msgid "The operation to use for the filter."
msgstr "Handlngen som skal brukes for filteret."
#. +> trunk5 stable5
#: controllers/view/filter/filterview.cpp:66
#, kde-format
msgctxt "@info:whatsthis"
msgid "Select the operation to use for the filter."
msgstr "Velg handlng som skal brukes for filteret."
#. +> trunk5 stable5
#: controllers/view/filter/filterview.cpp:89
#, kde-format
msgctxt "@action:button"
msgid "&Filter"
msgstr "&Filter"
#. +> trunk5 stable5
#: controllers/view/filter/filterview.cpp:91
#, kde-format
msgctxt "@info:tooltip"
msgid "Executes the filter for the bytes in the selected range."
msgstr "Kjører filteret for byter i det valgte området."
#. +> trunk5 stable5
#: controllers/view/filter/filterview.cpp:93
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid "If you press the <interface>Filter</interface> button, the operation you selected above is executed for the bytes in the selected range with the given options."
msgstr "Hvis du trykker <interface>Filter</interface>-knappen blir handlinga du valgte over utført på byter i det markerte området med de oppgitte valgene."
msgid "If you press the <interface>Go</interface> button, the cursor will be moved in the document to or, on your option, by the offset you entered above."
msgstr "Hvis du trykker <interface>Gå</interface>-knappen blir markøren flyttet i dokumentet til, eller om du vil med, forskyvningen du oppga over."
msgid "If you press the <interface>Replace</interface> button, the bytes you entered above are searched for within the byte array and any occurrence is replaced with the replacement bytes."
msgstr "Hvis du trykker <interface>Erstatt</interface>-knappen blir det søkt i byte-strengen etter de bytene du oppga over, og om de finnes blir de erstattet med erstatnings-bytene."
#. +> trunk5 stable5
#: controllers/view/replace/replacedialog.cpp:57
#, kde-format
msgctxt "@title:group"
msgid "Replace With"
msgstr "Erstatt med"
#. +> trunk5 stable5
#: controllers/view/replace/replacedialog.cpp:64
#, kde-format
msgctxt "@info:tooltip"
msgid "Enter the bytes to replace with, or select bytes previously replaced with from the list."
msgstr "Oppgi byter å erstatte med, eller velg byter som tidligere er satt inn fra lista."
#. +> trunk5 stable5
#: controllers/view/replace/replacedialog.cpp:73
#, kde-format
msgctxt "@option:check"
msgid "&Prompt on replace"
msgstr "S&pør ved erstatning"
#. +> trunk5 stable5
#: controllers/view/replace/replacedialog.cpp:74
#, kde-format
msgctxt "@info:whatsthis"
msgid "Ask before replacing each match found."
msgstr "Spør før det som blir funnet blir byttet ut."
#. +> trunk5 stable5
#: controllers/view/replace/replaceprompt.cpp:38
#, kde-format
msgctxt "@title:window prompt for iterative replacement"
msgid "If you press the <interface>Select</interface> button, the cursor will be moved in the document to or, on your option, by the offset you entered above."
msgstr "Hvis du trykker <interface>Velg</interface>-knappen blir markøren flyttet i dokumentet til, eller om du vil, med, forskyvningen du oppga over."
msgid "If you press the <interface>Extract</interface> button, the selected range is searched for all strings which have the set minimum length. This strings found will be listed in the view below."
msgstr "Hvis du trykker knappen <interface>Pakk ut</interface> gjennomsøkes det markerte området etter alle strenger som har oppgitt minstelengde. De strengene som blir funnet blir listet i visningen nedenfor."
msgid "If you press the <interface>Create new...</interface> button, an editor is opened where you can create and edit a new view profile. The values will be based on the ones of the view profile you selected in the list."
msgstr "Hvis du trykker <interface>Opprett ny</interface>-knappen, blir det åpnet et redigeringsvindu der du kan opprette og redigere en ny visningsprofil. Verdiene blir basert på den visningsprofilen du valgte i lista."
msgid "If you press the <interface>Set as Default</interface> button, the view profile you selected in the list is set as default for all views."
msgstr "Hvis du trykker <interface>Sett som standard</interface>-knappen, blir visningsprofilen du valgte i lista angitt som standard for alle visninger."
msgid "Root privileges are required to create a symlink. Do you want to continue?"
msgstr ""
#. +> trunk5
#: core/job.cpp:321
#, fuzzy, kde-format
#| msgid "Transfer"
msgid "Transfer data"
msgstr "Overfør"
#. +> trunk5
#: core/job.cpp:322
#, kde-format
msgid "Root privileges are required to complete transferring data. Do you want to continue?"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:43
#, kde-format
msgid "Could not read %1."
msgstr "Klarte ikke lese %1."
#. +> trunk5
#: core/job_error.cpp:46
#, kde-format
msgid "Could not write to %1."
msgstr "Klarte ikke skrive til %1."
#. +> trunk5
#: core/job_error.cpp:49
#, kde-format
msgid "Could not start process %1."
msgstr "Klarte ikke starte prosessen %1."
#. +> trunk5
#: core/job_error.cpp:52
#, fuzzy, kde-format
#| msgid ""
#| "Internal Error\n"
#| "Please send a full bug report at http://bugs.kde.org\n"
#| "%1"
msgid ""
"Internal Error\n"
"Please send a full bug report at https://bugs.kde.org\n"
"%1"
msgstr ""
"Intern feil\n"
"Send en fullstendig feilrapport på http://bugs.kde.org\n"
"%1"
#. +> trunk5
#: core/job_error.cpp:55
#, kde-format
msgid "Malformed URL %1."
msgstr "Ødelagt URL %1."
#. +> trunk5
#: core/job_error.cpp:58
#, kde-format
msgid "The protocol %1 is not supported."
msgstr "Protokollen %1 er ikke støttet."
#. +> trunk5
#: core/job_error.cpp:61
#, kde-format
msgid "The protocol %1 is only a filter protocol."
msgstr "Protokollen %1 er bare en filterprotokoll."
#. +> trunk5
#: core/job_error.cpp:68
#, kde-format
msgid "%1 is a folder, but a file was expected."
msgstr "%1 er en mappe, men en fil var forventet."
#. +> trunk5
#: core/job_error.cpp:71
#, kde-format
msgid "%1 is a file, but a folder was expected."
msgstr "%1 er en fil, men en mappe var forventet."
#. +> trunk5
#: core/job_error.cpp:74
#, kde-format
msgid "The file or folder %1 does not exist."
msgstr "Fila eller mappa %1 finnes ikke."
#. +> trunk5
#: core/job_error.cpp:77
#, kde-format
msgid "A file named %1 already exists."
msgstr "En fil med navnet %1 finnes fra før."
#. +> trunk5
#: core/job_error.cpp:80
#, kde-format
msgid "A folder named %1 already exists."
msgstr "En katalog med navnet %1 finnes fra før."
#. +> trunk5
#: core/job_error.cpp:83
#, kde-format
msgid "No hostname specified."
msgstr "Ingen vert spesifisert."
#. +> trunk5
#: core/job_error.cpp:83
#, kde-format
msgid "Unknown host %1"
msgstr "Ukjent vert %1"
#. +> trunk5
#: core/job_error.cpp:86
#, kde-format
msgid "Access denied to %1."
msgstr "Nektet tilgang til %1."
#. +> trunk5
#: core/job_error.cpp:89
#, kde-format
msgid ""
"Access denied.\n"
"Could not write to %1."
msgstr ""
"Nektet tilgang\n"
"Klarte ikke skrive til %1."
#. +> trunk5
#: core/job_error.cpp:92
#, kde-format
msgid "Could not enter folder %1."
msgstr "Klarte ikke gå inn i mappa %1."
#. +> trunk5
#: core/job_error.cpp:95
#, kde-format
msgid "The protocol %1 does not implement a folder service."
msgstr "Protokollen %1 implementerer ikke en mappetjeneste."
#. +> trunk5
#: core/job_error.cpp:98
#, kde-format
msgid "Found a cyclic link in %1."
msgstr "Fant en syklisk lenke i %1."
#. +> trunk5
#: core/job_error.cpp:104
#, kde-format
msgid "Found a cyclic link while copying %1."
msgstr "Fant en syklisk lenke under kopiering av %1."
#. +> trunk5
#: core/job_error.cpp:107
#, kde-format
msgid "Could not create socket for accessing %1."
msgstr "Klarte ikke opprette sokkel for tilgang til %1."
#. +> trunk5
#: core/job_error.cpp:110
#, kde-format
msgid "Could not connect to host %1."
msgstr "Klarte ikke koble til verten %1."
#. +> trunk5
#: core/job_error.cpp:113
#, kde-format
msgid "Connection to host %1 is broken."
msgstr "Tilkoblingen til verten %1 er brutt."
#. +> trunk5
#: core/job_error.cpp:116
#, kde-format
msgid "The protocol %1 is not a filter protocol."
msgstr "Protokollen %1 er ingen filterprotokoll."
#. +> trunk5
#: core/job_error.cpp:119
#, kde-format
msgid ""
"Could not mount device.\n"
"The reported error was:\n"
"%1"
msgstr ""
"Klarte ikke montere enhet.\n"
"Den rapporterte feilen var:\n"
"%1"
#. +> trunk5
#: core/job_error.cpp:122
#, kde-format
msgid ""
"Could not unmount device.\n"
"The reported error was:\n"
"%1"
msgstr ""
"Klarte ikke avmontere enhet.\n"
"Den rapporterte feilen var:\n"
"%1"
#. +> trunk5
#: core/job_error.cpp:125
#, kde-format
msgid "Could not read file %1."
msgstr "Klarte ikke lese fila %1."
#. +> trunk5
#: core/job_error.cpp:128
#, kde-format
msgid "Could not write to file %1."
msgstr "Klarte ikke skrive til fila %1."
#. +> trunk5
#: core/job_error.cpp:131
#, kde-format
msgid "Could not bind %1."
msgstr "Klarte ikke binde %1."
#. +> trunk5
#: core/job_error.cpp:134
#, kde-format
msgid "Could not listen %1."
msgstr "Klarte ikke lytte til %1."
#. +> trunk5
#: core/job_error.cpp:137
#, kde-format
msgid "Could not accept %1."
msgstr "Klarte ikke akseptere %1."
#. +> trunk5
#: core/job_error.cpp:143
#, kde-format
msgid "Could not access %1."
msgstr "Fikk ikke tilgang til %1."
#. +> trunk5
#: core/job_error.cpp:146
#, kde-format
msgid "Could not terminate listing %1."
msgstr "Klarte ikke stoppe listing %1."
#. +> trunk5
#: core/job_error.cpp:149
#, kde-format
msgid "Could not make folder %1."
msgstr "Klarte ikke lage mappa %1."
#. +> trunk5
#: core/job_error.cpp:152
#, kde-format
msgid "Could not remove folder %1."
msgstr "Klarte ikke fjerne mappa %1."
#. +> trunk5
#: core/job_error.cpp:155
#, kde-format
msgid "Could not resume file %1."
msgstr "Klarte ikke gjenoppta fila %1."
#. +> trunk5
#: core/job_error.cpp:158
#, kde-format
msgid "Could not rename file %1."
msgstr "Klarte ikke endre navnet på fila %1."
#. +> trunk5
#: core/job_error.cpp:161
#, kde-format
msgid "Could not change permissions for %1."
msgstr "Klarte ikke endre rettighet for %1."
#. +> trunk5
#: core/job_error.cpp:164
#, kde-format
msgid "Could not change ownership for %1."
msgstr "Klarte ikke endre eierskap for %1."
#. +> trunk5
#: core/job_error.cpp:167
#, kde-format
msgid "Could not delete file %1."
msgstr "Klarte ikke slette fila %1."
#. +> trunk5
#: core/job_error.cpp:170
#, kde-format
msgid "The process for the %1 protocol died unexpectedly."
msgstr "Prosessen til %1-protokollen døde uventet."
#. +> trunk5
#: core/job_error.cpp:173
#, kde-format
msgid ""
"Error. Out of memory.\n"
"%1"
msgstr ""
"Feil. Ikke nok minne.\n"
"%1"
#. +> trunk5
#: core/job_error.cpp:176
#, kde-format
msgid ""
"Unknown proxy host\n"
"%1"
msgstr ""
"Ukjent mellomtjener\n"
"%1"
#. +> trunk5
#: core/job_error.cpp:179
#, kde-format
msgid "Authorization failed, %1 authentication not supported"
msgstr "Feil ved autorisasjon, %1-autentisering er ikke støttet"
#. +> trunk5
#: core/job_error.cpp:182
#, kde-format
msgid ""
"User canceled action\n"
"%1"
msgstr ""
"Bruker avbrøt handlinga\n"
"%1"
#. +> trunk5
#: core/job_error.cpp:185
#, kde-format
msgid ""
"Internal error in server\n"
"%1"
msgstr ""
"Intern feil i tjener\n"
"%1"
#. +> trunk5
#: core/job_error.cpp:188
#, kde-format
msgid ""
"Timeout on server\n"
"%1"
msgstr ""
"Tidsavbrudd på tjener\n"
"%1"
#. +> trunk5
#: core/job_error.cpp:191
#, kde-format
msgid ""
"Unknown error\n"
"%1"
msgstr ""
"Ukjent feil\n"
"%1"
#. +> trunk5
#: core/job_error.cpp:194
#, kde-format
msgid ""
"Unknown interrupt\n"
"%1"
msgstr ""
"Ukjent avbrudd\n"
"%1"
#. +> trunk5
#: core/job_error.cpp:205
#, kde-format
msgid ""
"Could not delete original file %1.\n"
"Please check permissions."
msgstr ""
"Klarte ikke slette originalfila %1.\n"
"Kontroller tilgangsrettigheten."
#. +> trunk5
#: core/job_error.cpp:208
#, kde-format
msgid ""
"Could not delete partial file %1.\n"
"Please check permissions."
msgstr ""
"Klarte ikke slette den delvis nedlastede fila %1.\n"
"Kontroller tilgangsrettigheten."
#. +> trunk5
#: core/job_error.cpp:211
#, kde-format
msgid ""
"Could not rename original file %1.\n"
"Please check permissions."
msgstr ""
"Klarte ikke endre navnet på originalfila %1\n"
"Kontroller tilgangsrettigheten."
#. +> trunk5
#: core/job_error.cpp:214
#, kde-format
msgid ""
"Could not rename partial file %1.\n"
"Please check permissions."
msgstr ""
"Klarte ikke endre navnet på den delvis nedlastede fila %1.\n"
"Kontroller tilgangsrettigheten."
#. +> trunk5
#: core/job_error.cpp:217
#, kde-format
msgid ""
"Could not create symlink %1.\n"
"Please check permissions."
msgstr ""
"Klarte ikke opprette symbolsk lenke %1.\n"
"Kontroller tilgangsrettigheten."
#. +> trunk5
#: core/job_error.cpp:223
#, kde-format
msgid "There is not enough space on the disk to write %1."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:226
#, kde-format
msgid ""
"The source and destination are the same file.\n"
"%1"
msgstr ""
"Kilden og målet er den samme fila.\n"
"%1"
#. +> trunk5
#: core/job_error.cpp:232
#, kde-format
msgid "%1 is required by the server, but is not available."
msgstr "Tjeneren trenger %1, som ikke er tilgjengelig."
#. +> trunk5
#: core/job_error.cpp:235
#, kde-format
msgid "Access to restricted port in POST denied."
msgstr "Tilgang nektet til begrenset port i POST."
#. +> trunk5
#: core/job_error.cpp:238
#, kde-format
msgid "The required content size information was not provided for a POST operation."
msgstr "For en POST-handling ble det ikke oppgitt påkrevet størrelse på innholdet."
#. +> trunk5
#: core/job_error.cpp:241
#, kde-format
msgid "A file or folder cannot be dropped onto itself"
msgstr "Du kan ikke dra en fil eller mappe til seg selv"
#. +> trunk5
#: core/job_error.cpp:244
#, fuzzy, kde-format
#| msgctxt "@info:status"
#| msgid "A folder cannot be dropped into itself"
msgid "A folder cannot be moved into itself"
msgstr "Du kan ikke dra en mappe til seg selv"
#. +> trunk5
#: core/job_error.cpp:247
#, kde-format
msgid "Communication with the local password server failed"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:250
#, fuzzy, kde-format
#| msgid "Unable to create io-slave: %1"
msgid "Unable to create io-slave. %1"
msgstr "Kan ikke lage io-slave: %1"
#. +> trunk5
#: core/job_error.cpp:253
#, kde-kuit-format
msgctxt "@info"
msgid "Cannot transfer <filename>%1</filename> because it is too large. The destination filesystem only supports files up to 4GiB"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:256
#, kde-format
msgid ""
"Privilege escalation is not necessary because \n"
"'%1' is owned by the current user.\n"
"Please retry after changing permissions."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:259
#, fuzzy, kde-format
#| msgid ""
#| "Unknown error code %1\n"
#| "%2\n"
#| "Please send a full bug report at http://bugs.kde.org."
msgid ""
"Unknown error code %1\n"
"%2\n"
"Please send a full bug report at https://bugs.kde.org."
msgstr ""
"Ukjent feilkode %1\n"
"%2\n"
"Send en fullstendig feilrapport på http://bugs.kde.org."
#. +> trunk5
#: core/job_error.cpp:284
#, kde-format
msgctxt "@info url"
msgid "(unknown)"
msgstr "(ukjent)"
#. +> trunk5
#: core/job_error.cpp:291
#, kde-format
msgctxt "@info %1 error name, %2 description"
msgid ""
"<qt>"
"<p><b>%1</b></p>"
"<p>%2</p>"
"</qt>"
msgstr ""
"<qt>"
"<p><b>%1</b></p>"
"<p>%2</p>"
"</qt>"
#. +> trunk5
#: core/job_error.cpp:295
#, kde-format
msgid "<b>Technical reason</b>: "
msgstr "<b>Teknisk grunn</b>: "
#. +> trunk5
#: core/job_error.cpp:297
#, kde-format
msgid "<b>Details of the request</b>:"
msgstr "<b>Detaljer om forespørselen</b>:"
#. +> trunk5
#: core/job_error.cpp:298
#, kde-format
msgid "<li>URL: %1</li>"
msgstr "<li>URL: %1</li>"
#. +> trunk5
#: core/job_error.cpp:300
#, kde-format
msgid "<li>Protocol: %1</li>"
msgstr "<li>Protokoll: %1</li>"
#. +> trunk5
#: core/job_error.cpp:302
#, kde-format
msgid "<li>Date and time: %1</li>"
msgstr "<li>Dato og klokkeslett: %1</li>"
#. +> trunk5
#: core/job_error.cpp:303
#, kde-format
msgid "<li>Additional information: %1</li>"
msgstr "<li>Tilleggsinformasjon: %1</li>"
#. +> trunk5
#: core/job_error.cpp:306
#, kde-format
msgid "<b>Possible causes</b>:"
msgstr "<b>Mulige årsaker</b>:"
#. +> trunk5
#: core/job_error.cpp:311
#, kde-format
msgid "<b>Possible solutions</b>:"
msgstr "<b>Mulige løsninger</b>:"
#. +> trunk5
#: core/job_error.cpp:345
#, kde-format
msgctxt "@info protocol"
msgid "(unknown)"
msgstr "(ukjent)"
#. +> trunk5
#: core/job_error.cpp:354
#, kde-format
msgid "Contact your appropriate computer support system, whether the system administrator, or technical support group for further assistance."
msgstr "Ta kontakt med brukerstøtte eller systemadministratoren for hjelp."
#. +> trunk5
#: core/job_error.cpp:357
#, kde-format
msgid "Contact the administrator of the server for further assistance."
msgstr "Ta kontakt med tjeneradministratoren for hjelp."
#. +> trunk5
#: core/job_error.cpp:360
#, kde-format
msgid "Check your access permissions on this resource."
msgstr "Kontroller tilgangsrettighetene dine til denne ressursen."
#. +> trunk5
#: core/job_error.cpp:361
#, kde-format
msgid "Your access permissions may be inadequate to perform the requested operation on this resource."
msgstr "Du har kanskje ikke tilstrekkelig tilgangsrettighet til å utføre denne operasjonen på denne ressursen."
#. +> trunk5
#: core/job_error.cpp:363
#, kde-format
msgid "The file may be in use (and thus locked) by another user or application."
msgstr "Fila er kanskje i bruk (og dermed låst) av en annen bruker eller et annet program."
#. +> trunk5
#: core/job_error.cpp:365
#, kde-format
msgid "Check to make sure that no other application or user is using the file or has locked the file."
msgstr "Se etter at ingen andre programmer eller brukere har låst fila eller bruker den."
#. +> trunk5
#: core/job_error.cpp:367
#, kde-format
msgid "Although unlikely, a hardware error may have occurred."
msgstr "Det kan også være at det er feil ved maskinvaren, men det er lite sannsynlig."
#. +> trunk5
#: core/job_error.cpp:369
#, kde-format
msgid "You may have encountered a bug in the program."
msgstr "Du har kanskje støtt på en feil i programmet."
#. +> trunk5
#: core/job_error.cpp:370
#, kde-format
msgid "This is most likely to be caused by a bug in the program. Please consider submitting a full bug report as detailed below."
msgstr "Dette skjer sannsynligvis på grunn av en feil i programmet. Du bør kanskje sende inn en full feilrapport som vist under."
#. +> trunk5
#: core/job_error.cpp:372
#, kde-format
msgid "Update your software to the latest version. Your distribution should provide tools to update your software."
msgstr "Oppdater programvaren din til siste versjon. Distribusjonen din har sannsynligvis verktøy til å oppdatere programmene med."
#. +> trunk5
#: core/job_error.cpp:374
#, fuzzy, kde-format
#| msgid "When all else fails, please consider helping the KDE team or the third party maintainer of this software by submitting a high quality bug report. If the software is provided by a third party, please contact them directly. Otherwise, first look to see if the same bug has been submitted by someone else by searching at the <a href=\"http://bugs.kde.org/\">KDE bug reporting website</a>. If not, take note of the details given above, and include them in your bug report, along with as many other details as you think might help."
msgid "When all else fails, please consider helping the KDE team or the third party maintainer of this software by submitting a high quality bug report. If the software is provided by a third party, please contact them directly. Otherwise, first look to see if the same bug has been submitted by someone else by searching at the <a href=\"https://bugs.kde.org/\">KDE bug reporting website</a>. If not, take note of the details given above, and include them in your bug report, along with as many other details as you think might help."
msgstr "Dersom alt annet mislyktes, kan du hjelpe KDE eller de som har laget programmet ved å sende inn en god feilrapport. Dersom programmet kommer fra andre enn KDE, ta kontakt direkte med produsenten. Hvis ikke, kan du se om den samme feilen alt er rapportert av andre ved å søke på <a href=\"http://bugs.kde.org/\">KDE-nettstedet for feilrapportering</a>. Dersom feilen ikke er rapportert, bør du notere alle opplysningene over og ta dem med i feilrapporten sammen med alle andre detaljer du tror kan hjelpe."
#. +> trunk5
#: core/job_error.cpp:382
#, kde-format
msgid "There may have been a problem with your network connection."
msgstr "Det er kanskje et problem med nettverksforbindelsen."
#. +> trunk5
#: core/job_error.cpp:385
#, kde-format
msgid "There may have been a problem with your network configuration. If you have been accessing the Internet with no problems recently, this is unlikely."
msgstr "Det kan være et problem med nettverksoppsettet. Det er lite sannsynlig dersom du ikke nylig har hatt problemer med tilgangen til Internett."
#. +> trunk5
#: core/job_error.cpp:388
#, kde-format
msgid "There may have been a problem at some point along the network path between the server and this computer."
msgstr "Problemet kan ligge et sted i nettverket mellom tjeneren og denne datamaskinen."
#. +> trunk5
#: core/job_error.cpp:390
#, kde-format
msgid "Try again, either now or at a later time."
msgstr "Prøv igjen, enten nå eller senere en gang."
#. +> trunk5
#: core/job_error.cpp:391
#, kde-format
msgid "A protocol error or incompatibility may have occurred."
msgstr "En protokollfeil eller inkompatibilitet kan ha oppstått."
#. +> trunk5
#: core/job_error.cpp:392
#, kde-format
msgid "Ensure that the resource exists, and try again."
msgstr "Se etter at ressursen faktisk finnes og prøv igjen."
#. +> trunk5
#: core/job_error.cpp:393
#, kde-format
msgid "The specified resource may not exist."
msgstr "Ressursen finnes kanskje ikke."
#. +> trunk5
#: core/job_error.cpp:394
#, kde-format
msgid "Double-check that you have entered the correct location and try again."
msgstr "Dobbeltsjekk at adressen er riktig og prøv igjen."
#. +> trunk5
#: core/job_error.cpp:396
#, kde-format
msgid "Check your network connection status."
msgstr "Kontroller nettverksforbindelsen."
#. +> trunk5
#: core/job_error.cpp:400
#, kde-format
msgid "Cannot Open Resource For Reading"
msgstr "Klarer ikke åpne ressurs for lesing"
#. +> trunk5
#: core/job_error.cpp:401
#, kde-format
msgid "This means that the contents of the requested file or folder <strong>%1</strong> could not be retrieved, as read access could not be obtained."
msgstr "Dette tyder på at innholdet i fila eller katalogen <strong>%1</strong> ikke kunne leses, siden du ikke fikk lesetilgang."
#. +> trunk5
#: core/job_error.cpp:404
#, kde-format
msgid "You may not have permissions to read the file or open the folder."
msgstr "Du har kanskje ikke rettighet til å lese fila eller åpne katalogen."
#. +> trunk5
#: core/job_error.cpp:410
#, kde-format
msgid "Cannot Open Resource For Writing"
msgstr "Klarer ikke åpne ressurs for skriving"
#. +> trunk5
#: core/job_error.cpp:411
#, kde-format
msgid "This means that the file, <strong>%1</strong>, could not be written to as requested, because access with permission to write could not be obtained."
msgstr "Dette tyder på at fila <strong>%1</strong> ikke kunne skrives, siden du ikke fikk skrivetilgang."
#. +> trunk5
#: core/job_error.cpp:419
#, kde-format
msgid "Cannot Launch Process required by the %1 Protocol"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:420
#, kde-format
msgid "Unable to Launch Process"
msgstr "Kan ikke starte prosess"
#. +> trunk5
#: core/job_error.cpp:421
#, fuzzy, kde-format
#| msgid "The program on your computer which provides access to the <strong>%1</strong> protocol could not be started. This is usually due to technical reasons."
msgid "The program on your computer which provides access to the <strong>%1</strong> protocol could not be found or started. This is usually due to technical reasons."
msgstr "Klarte ikke starte programmet som gir tilgang til <strong>%1</strong>-protokollen. Dette skjer oftest på grunn av tekniske feil."
#. +> trunk5
#: core/job_error.cpp:424
#, kde-format
msgid "The program which provides compatibility with this protocol may not have been updated with your last update of KDE. This can cause the program to be incompatible with the current version and thus not start."
msgstr "Programmet som gir kompatibilitet med denne protokollen ble kanskje ikke oppdatert da du sist oppdaterte KDE. I så fall kan det hende programmet ikke starter fordi det er inkompatibelt med denne versjonen."
#. +> trunk5
#: core/job_error.cpp:432
#, kde-format
msgid "Internal Error"
msgstr "Intern feil"
#. +> trunk5
#: core/job_error.cpp:433
#, kde-format
msgid "The program on your computer which provides access to the <strong>%1</strong> protocol has reported an internal error."
msgstr "Programmet på maskinen din som gir tilgang til <strong>%1</strong>-protokollen har rapportert en intern feil."
#. +> trunk5
#: core/job_error.cpp:441
#, kde-format
msgid "Improperly Formatted URL"
msgstr "Feil URL-formatering"
#. +> trunk5
#: core/job_error.cpp:442
#, kde-format
msgid ""
"The <strong>U</strong>niform <strong>R</strong>esource <strong>L</strong>ocator (URL) that you entered was not properly formatted. The format of a URL is generally as follows:"
msgid "The protocol <strong>%1</strong> is not supported by the KDE programs currently installed on this computer."
msgstr "KDE-programmene som er installerte på denne maskinen støtter ikke protokollen <strong>%1</strong>."
#. +> trunk5
#: core/job_error.cpp:455
#, kde-format
msgid "The requested protocol may not be supported."
msgstr "Den etterspurte protokollen er kanskje ikke støttet."
#. +> trunk5
#: core/job_error.cpp:456
#, kde-format
msgid "The versions of the %1 protocol supported by this computer and the server may be incompatible."
msgstr "Denne datamaskinen og tjenermaskinen støtter kanskje ikke samme versjon av %1-protokollen."
#. +> trunk5
#: core/job_error.cpp:458
#, fuzzy, kde-format
#| msgid "You may perform a search on the Internet for a KDE program (called a kioslave or ioslave) which supports this protocol. Places to search include <a href=\"http://kde-apps.org/\">http://kde-apps.org/</a> and <a href=\"http://freshmeat.net/\">http://freshmeat.net/</a>."
msgid "You may perform a search on the Internet for a KDE program (called a kioslave or ioslave) which supports this protocol. Places to search include <a href=\"https://kde-apps.org/\">https://kde-apps.org/</a> and <a href=\"http://freshmeat.net/\">http://freshmeat.net/</a>."
msgstr "Du kan utføre et søk på Internett etter et KDE-program (kalt en kioslave eller ioslave) som støtter denne protokollen. Aktuelle nettsteder er blant annet <a href=\"http://apps.kde.com/\">http://apps.kde.com/</a> og <a href=\"http://freshmeat.net/\">http://freshmeat.net/</a>."
#. +> trunk5
#: core/job_error.cpp:467
#, kde-format
msgid "URL Does Not Refer to a Resource."
msgstr "URL-en refererer ikke til noen ressurs."
#. +> trunk5
#: core/job_error.cpp:468
#, kde-format
msgid "Protocol is a Filter Protocol"
msgstr "Protokollen er en filterprotokoll"
#. +> trunk5
#: core/job_error.cpp:469
#, kde-format
msgid "The <strong>U</strong>niform <strong>R</strong>esource <strong>L</strong>ocator (URL) that you entered did not refer to a specific resource."
msgstr "Adressen (<strong>URL</strong>-en) du oppga refererer ikke til en spesiell ressurs."
#. +> trunk5
#: core/job_error.cpp:472
#, kde-format
msgid "KDE is able to communicate through a protocol within a protocol; the protocol specified is only for use in such situations, however this is not one of these situations. This is a rare event, and is likely to indicate a programming error."
msgstr "KDE kan kommunisere gjennom en protokoll inni en protokoll. Den oppgitte protokollen er bare for slike tilfeller, mens dette ikke er et slikt tilfelle. Dette hender sjelden, og skyldes sannsynligvis en programmeringsfeil."
#. +> trunk5
#: core/job_error.cpp:480
#, kde-format
msgid "Unsupported Action: %1"
msgstr "Ustøttet handling: %1"
#. +> trunk5
#: core/job_error.cpp:481
#, kde-format
msgid "The requested action is not supported by the KDE program which is implementing the <strong>%1</strong> protocol."
msgstr "Den etterspurte handlinga er ikke støttet av KDE-programmet som implementerer <strong>%1</strong>-protokollen."
#. +> trunk5
#: core/job_error.cpp:484
#, kde-format
msgid "This error is very much dependent on the KDE program. The additional information should give you more information than is available to the KDE input/output architecture."
msgstr "Denne feilen er i stor grad avhengig av KDE-programmet. Ekstrainformasjonen bør gi deg mer informasjon enn du kan få gjennom inn/ut-arkitekturen i KDE."
#. +> trunk5
#: core/job_error.cpp:487
#, kde-format
msgid "Attempt to find another way to accomplish the same outcome."
msgstr "Forsøk å finne en annen måte å gjøre det samme."
#. +> trunk5
#: core/job_error.cpp:492
#, kde-format
msgid "File Expected"
msgstr "Fil ventet"
#. +> trunk5
#: core/job_error.cpp:493
#, kde-format
msgid "The request expected a file, however the folder <strong>%1</strong> was found instead."
msgstr "Forespørselen forventet en fil, men fant mappa <strong>%1</strong> i stedet."
#. +> trunk5
#: core/job_error.cpp:495
#, kde-format
msgid "This may be an error on the server side."
msgstr "Dette kan skyldes en feil på tjenersiden."
#. +> trunk5
#: core/job_error.cpp:500
#, kde-format
msgid "Folder Expected"
msgstr "Mappe ventet"
#. +> trunk5
#: core/job_error.cpp:501
#, kde-format
msgid "The request expected a folder, however the file <strong>%1</strong> was found instead."
msgstr "Forespørselen forventet en mappe, men fant fila <strong>%1</strong> i stedet."
#. +> trunk5
#: core/job_error.cpp:508
#, kde-format
msgid "File or Folder Does Not Exist"
msgstr "Fila eller mappa finnes ikke"
#. +> trunk5
#: core/job_error.cpp:509
#, kde-format
msgid "The specified file or folder <strong>%1</strong> does not exist."
msgstr "Den oppgitte fila eller mappa <strong>%1</strong> finnes ikke."
#. +> trunk5
#: core/job_error.cpp:517
#, kde-format
msgid "The requested file could not be created because a file with the same name already exists."
msgstr "Den etterspurte fila kunne ikke opprettes fordi det alt finnes en fil med det navnet."
#. +> trunk5
#: core/job_error.cpp:519
#, kde-format
msgid "Try moving the current file out of the way first, and then try again."
msgstr "Prøv å flytte den gamle fila vekk først, og forsøk igjen."
#. +> trunk5
#: core/job_error.cpp:521
#, kde-format
msgid "Delete the current file and try again."
msgstr "Slett den gamle fila og prøv igjen."
#. +> trunk5
#: core/job_error.cpp:522
#, kde-format
msgid "Choose an alternate filename for the new file."
msgstr "Velg et annet navn på den nye fila."
#. +> trunk5
#: core/job_error.cpp:527
#, kde-format
msgid "The requested folder could not be created because a folder with the same name already exists."
msgstr "Den etterspurte mappa kunne ikke opprettes fordi det alt finnes en mappe med det navnet."
#. +> trunk5
#: core/job_error.cpp:529
#, kde-format
msgid "Try moving the current folder out of the way first, and then try again."
msgstr "Prøv å flytte den gamle mappa vekk først, og forsøk igjen."
#. +> trunk5
#: core/job_error.cpp:531
#, kde-format
msgid "Delete the current folder and try again."
msgstr "Slett den gamle mappa og prøv igjen."
#. +> trunk5
#: core/job_error.cpp:532
#, kde-format
msgid "Choose an alternate name for the new folder."
msgstr "Velg ett annet navn på den nye mappa."
#. +> trunk5
#: core/job_error.cpp:536
#, kde-format
msgid "Unknown Host"
msgstr "Ukjent vert"
#. +> trunk5
#: core/job_error.cpp:537
#, kde-format
msgid "An unknown host error indicates that the server with the requested name, <strong>%1</strong>, could not be located on the Internet."
msgstr "Feilmeldinga ukjent vert tyder på at tjeneren med navnet <strong>%1</strong> ikke ble funnet på Internett."
#. +> trunk5
#: core/job_error.cpp:540
#, kde-format
msgid "The name that you typed, %1, may not exist: it may be incorrectly typed."
msgstr "Navnet %1, som du oppga, finnes kanskje ikke. Kanskje du har skrevet feil."
#. +> trunk5
#: core/job_error.cpp:547
#, kde-format
msgid "Access Denied"
msgstr "Nektet tilgang"
#. +> trunk5
#: core/job_error.cpp:548
#, kde-format
msgid "Access was denied to the specified resource, <strong>%1</strong>."
msgstr "Nektet tilgang til den oppgitte ressursen <strong>%1</strong>."
#. +> trunk5
#: core/job_error.cpp:550 core/job_error.cpp:776
#, kde-format
msgid "You may have supplied incorrect authentication details or none at all."
msgstr "Du har kanskje oppgitt feil eller ingen autentiseringsinformasjon."
#. +> trunk5
#: core/job_error.cpp:552 core/job_error.cpp:778
#, kde-format
msgid "Your account may not have permission to access the specified resource."
msgstr "Kontoen din har kanskje ikke tilgangsrett til denne ressursen."
msgid "Retry the request and ensure your authentication details are entered correctly."
msgstr "Prøv spørringen på nytt og se til at autentiseringsinformasjonen er riktig."
#. +> trunk5
#: core/job_error.cpp:562
#, kde-format
msgid "Write Access Denied"
msgstr "Nektet skrivetilgang"
#. +> trunk5
#: core/job_error.cpp:563
#, kde-format
msgid "This means that an attempt to write to the file <strong>%1</strong> was rejected."
msgstr "Dette betyr at forsøket på å skrive til fila <strong>%1</strong> ble avvist."
#. +> trunk5
#: core/job_error.cpp:570
#, kde-format
msgid "Unable to Enter Folder"
msgstr "Kan ikke gå inn i mappe"
#. +> trunk5
#: core/job_error.cpp:571
#, kde-format
msgid "This means that an attempt to enter (in other words, to open) the requested folder <strong>%1</strong> was rejected."
msgstr "Dette betyr at et forsøk på å åpne mappa <strong>%1</strong> ble avvist."
#. +> trunk5
#: core/job_error.cpp:579
#, kde-format
msgid "Folder Listing Unavailable"
msgstr "Mappeliste ikke tilgjengelig"
#. +> trunk5
#: core/job_error.cpp:580
#, kde-format
msgid "Protocol %1 is not a Filesystem"
msgstr "Protokollen %1 er ikke et filsystem"
#. +> trunk5
#: core/job_error.cpp:581
#, kde-format
msgid "This means that a request was made which requires determining the contents of the folder, and the KDE program supporting this protocol is unable to do so."
msgstr "Dette betyr at forespørselen ikke klarte å avgjøre innholdet i mappafordi KDE-programmet som støtter protokollen ikke klarer det."
#. +> trunk5
#: core/job_error.cpp:589
#, kde-format
msgid "Cyclic Link Detected"
msgstr "Syklisk lenke oppdaget"
#. +> trunk5
#: core/job_error.cpp:590
#, kde-format
msgid "UNIX environments are commonly able to link a file or folder to a separate name and/or location. KDE detected a link or series of links that results in an infinite loop - i.e. the file was (perhaps in a roundabout way) linked to itself."
msgstr "UNIX-miljøer kan vanligvis lenke filer eller mapper til andre navn og/eller plasseringer. KDE oppdaget en lenke eller en rekke lenker som går i uendelig løkke. Fila er altså (kanskje via omveier) en lenke til seg selv."
#. +> trunk5
#: core/job_error.cpp:594 core/job_error.cpp:616
#, kde-format
msgid "Delete one part of the loop in order that it does not cause an infinite loop, and try again."
msgstr "Slett en del av lenkerekken slik at den ikke lenge er en uendelig løkke, og prøv igjen."
#. +> trunk5
#: core/job_error.cpp:603
#, kde-format
msgid "Request Aborted By User"
msgstr "Forespørsel avbrutt av brukeren"
#. +> trunk5
#: core/job_error.cpp:604 core/job_error.cpp:919
#, kde-format
msgid "The request was not completed because it was aborted."
msgstr "Forespørselen ble ikke fullført fordi den ble avbrutt."
msgid "UNIX environments are commonly able to link a file or folder to a separate name and/or location. During the requested copy operation, KDE detected a link or series of links that results in an infinite loop - i.e. the file was (perhaps in a roundabout way) linked to itself."
msgstr "UNIX-miljøer kan vanligvis lenke filer eller mapper til andre navn og/eller plasseringer. Under kopieringsoperasjonen oppdaget KDE en lenke eller en rekke lenker som går i uendelig løkke. Fila er altså (kanskje via omveier) en lenke til seg selv."
#. +> trunk5
#: core/job_error.cpp:621
#, kde-format
msgid "Could Not Create Network Connection"
msgstr "Klarte ikke åpne nettverksforbindelse"
#. +> trunk5
#: core/job_error.cpp:622
#, kde-format
msgid "Could Not Create Socket"
msgstr "Klarte ikke opprette sokkel"
#. +> trunk5
#: core/job_error.cpp:623
#, kde-format
msgid "This is a fairly technical error in which a required device for network communications (a socket) could not be created."
msgstr "Dette er en nokså teknisk feil som innebærer at en enhet for nettverkskommunikasjon (en sokkel) ikke kunne opprettes."
msgid "The network connection may be incorrectly configured, or the network interface may not be enabled."
msgstr "Nettverksforbindelsen er kanskje feil satt opp eller nettverksgrensesnittet er ikke aktivt."
#. +> trunk5
#: core/job_error.cpp:631
#, kde-format
msgid "Connection to Server Refused"
msgstr "Nektet tilgang til tjener"
#. +> trunk5
#: core/job_error.cpp:632
#, kde-format
msgid "The server <strong>%1</strong> refused to allow this computer to make a connection."
msgstr "Tjeneren <strong>%1</strong> nektet tilkopling fra denne datamaskinen."
#. +> trunk5
#: core/job_error.cpp:634
#, kde-format
msgid "The server, while currently connected to the Internet, may not be configured to allow requests."
msgstr "Tjeneren er kanskje ikke sett opp til å tillate forespørsler, selv om den er koblet til Internett."
#. +> trunk5
#: core/job_error.cpp:636
#, kde-format
msgid "The server, while currently connected to the Internet, may not be running the requested service (%1)."
msgstr "Tjeneren kjører kanskje ikke den etterspurte tjenesten (%1), selv om den er koblet til Internett."
#. +> trunk5
#: core/job_error.cpp:638
#, kde-format
msgid "A network firewall (a device which restricts Internet requests), either protecting your network or the network of the server, may have intervened, preventing this request."
msgstr "Forespørselen ble hindret, kanskje av en brannmur (en enhet som innskrenker Internett-tilgang) i nettverket ditt eller nettverket til tjeneren."
#. +> trunk5
#: core/job_error.cpp:645
#, kde-format
msgid "Connection to Server Closed Unexpectedly"
msgstr "Forbindelsen til tjeneren ble uventet koblet ned"
#. +> trunk5
#: core/job_error.cpp:646
#, kde-format
msgid "Although a connection was established to <strong>%1</strong>, the connection was closed at an unexpected point in the communication."
msgstr "Selv om forbindelsen til <strong>%1</strong> ble opprettet, ble den koblet ned på et uventet tidspunkt."
#. +> trunk5
#: core/job_error.cpp:649
#, kde-format
msgid "A protocol error may have occurred, causing the server to close the connection as a response to the error."
msgstr "En protokollfeil kan ha oppstått, slik at tjeneren koblet ned forbindelsen."
#. +> trunk5
#: core/job_error.cpp:655
#, kde-format
msgid "URL Resource Invalid"
msgstr "Ugyldig URL-ressurs"
#. +> trunk5
#: core/job_error.cpp:656
#, kde-format
msgid "Protocol %1 is not a Filter Protocol"
msgstr "Protokollen %1 er ingen filterprotokoll"
#. +> trunk5
#: core/job_error.cpp:657
#, kde-format
msgid "The <strong>U</strong>niform <strong>R</strong>esource <strong>L</strong>ocator (URL) that you entered did not refer to a valid mechanism of accessing the specific resource, <strong>%1%2</strong>."
msgstr "Adressen (URL-en) du oppga refererer ikke til en gyldig måte å få tilgang til denne ressursen, <strong>%1%2</strong>."
#. +> trunk5
#: core/job_error.cpp:662
#, kde-format
msgid "KDE is able to communicate through a protocol within a protocol. This request specified a protocol be used as such, however this protocol is not capable of such an action. This is a rare event, and is likely to indicate a programming error."
msgstr "KDE kan kommunisere gjennom en protokoll inni en annen protokoll. Denne forespørselen spesifiserte slik kommunikasjon, men denne protokollen kan ikke kommunisere på den måten. Dette skjer sjelden, og skyldes vanligvis programmeringsfeil."
#. +> trunk5
#: core/job_error.cpp:670
#, kde-format
msgid "Unable to Initialize Input/Output Device"
msgstr "Klarer ikke montere inn/ut-enhet"
#. +> trunk5
#: core/job_error.cpp:671
#, kde-format
msgid "Could Not Mount Device"
msgstr "Klarte ikke montere enhet"
#. +> trunk5
#: core/job_error.cpp:672
#, kde-format
msgid "The requested device could not be initialized (\"mounted\"). The reported error was: <strong>%1</strong>"
msgstr "Klarte ikke montere enheten. Den rapporterte feilen var: <strong>%1</strong>"
#. +> trunk5
#: core/job_error.cpp:675
#, kde-format
msgid "The device may not be ready, for example there may be no media in a removable media device (i.e. no CD-ROM in a CD drive), or in the case of a peripheral/portable device, the device may not be correctly connected."
msgstr "Enheten er kanskje ikke klar. Det kan skyldes at det ikke er noe medium i enheten (for eksempel ingen CD-plate i CD-spilleren), eller at enheten ikke er koblet til."
#. +> trunk5
#: core/job_error.cpp:679
#, kde-format
msgid "You may not have permissions to initialize (\"mount\") the device. On UNIX systems, often system administrator privileges are required to initialize a device."
msgstr "Du har kanskje ikke rettighet til å montere enheten. På UNIX-systemer er det vanlig at bare systemadministratoren kan montere en enhet."
#. +> trunk5
#: core/job_error.cpp:683
#, kde-format
msgid "Check that the device is ready; removable drives must contain media, and portable devices must be connected and powered on.; and try again."
msgstr "Se til at enheten er klar; at et lagringsmedium er satt inn og at enheten er koblet til og slått på."
#. +> trunk5
#: core/job_error.cpp:689
#, kde-format
msgid "Unable to Uninitialize Input/Output Device"
msgstr "Klarer ikke avmontere inn/ut-enhet"
#. +> trunk5
#: core/job_error.cpp:690
#, kde-format
msgid "Could Not Unmount Device"
msgstr "Klarte ikke avmontere enhet"
#. +> trunk5
#: core/job_error.cpp:691
#, kde-format
msgid "The requested device could not be uninitialized (\"unmounted\"). The reported error was: <strong>%1</strong>"
msgstr "Enheten kunne ikke avmonteres Den rapporterte feilen var: <strong>%1</strong>"
#. +> trunk5
#: core/job_error.cpp:694
#, kde-format
msgid "The device may be busy, that is, still in use by another application or user. Even such things as having an open browser window on a location on this device may cause the device to remain in use."
msgstr "Enheten er kanskje opptatt, altså ennå i bruk av et annet program eller en annen bruker. Et åpent vindu i filbehandleren er nok til at enheten er i bruk."
#. +> trunk5
#: core/job_error.cpp:698
#, kde-format
msgid "You may not have permissions to uninitialize (\"unmount\") the device. On UNIX systems, system administrator privileges are often required to uninitialize a device."
msgstr "Du har kanskje ikke rettighet til å avmontere enheten. På UNIX-systemer er det vanlig at bare systemadministratoren kan avmontere en enhet."
#. +> trunk5
#: core/job_error.cpp:702
#, kde-format
msgid "Check that no applications are accessing the device, and try again."
msgstr "Se til at ingen program bruker enheten og prøv igjen."
#. +> trunk5
#: core/job_error.cpp:707
#, kde-format
msgid "Cannot Read From Resource"
msgstr "Klarer ikke lese fra ressursen"
#. +> trunk5
#: core/job_error.cpp:708
#, kde-format
msgid "This means that although the resource, <strong>%1</strong>, was able to be opened, an error occurred while reading the contents of the resource."
msgstr "Dette betyr at en feil oppsto under lesing av innholdet fra ressursen <strong>%1</strong>, selv om ressursen kunne åpnes."
#. +> trunk5
#: core/job_error.cpp:711
#, kde-format
msgid "You may not have permissions to read from the resource."
msgstr "Du har kanskje ikke rettighet til å lese fra ressursen."
#. +> trunk5
#: core/job_error.cpp:724
#, kde-format
msgid "Cannot Write to Resource"
msgstr "Kan ikke skrive til ressursen"
#. +> trunk5
#: core/job_error.cpp:725
#, kde-format
msgid "This means that although the resource, <strong>%1</strong>, was able to be opened, an error occurred while writing to the resource."
msgstr "Dette betyr at en feil oppstod under skriving til ressursen <strong>%1</strong>, selv om ressursen kunne åpnes."
#. +> trunk5
#: core/job_error.cpp:728
#, kde-format
msgid "You may not have permissions to write to the resource."
msgstr "Du har kanskje ikke rettighet til å skrive til ressursen."
#. +> trunk5
#: core/job_error.cpp:741 core/job_error.cpp:752
#, kde-format
msgid "Could Not Listen for Network Connections"
msgstr "Klarte ikke lytte etter nettverksforbindelser"
#. +> trunk5
#: core/job_error.cpp:742
#, kde-format
msgid "Could Not Bind"
msgstr "Klarte ikke binde"
#. +> trunk5
#: core/job_error.cpp:743 core/job_error.cpp:754
#, kde-format
msgid "This is a fairly technical error in which a required device for network communications (a socket) could not be established to listen for incoming network connections."
msgstr "Dette er en nokså teknisk feil der en nødvendig enhet for nettverkskommunikasjon (en sokkel) ikke kunne opprettes for lytting etter innkommende nettverkstilkoblinger."
#. +> trunk5
#: core/job_error.cpp:753
#, kde-format
msgid "Could Not Listen"
msgstr "Klarte ikke lytte"
#. +> trunk5
#: core/job_error.cpp:763
#, kde-format
msgid "Could Not Accept Network Connection"
msgstr "Klarte ikke ta imot nettverksforbindelse"
#. +> trunk5
#: core/job_error.cpp:764
#, kde-format
msgid "This is a fairly technical error in which an error occurred while attempting to accept an incoming network connection."
msgstr "Dette er en nokså teknisk feil som oppsto ved forsøk på å godta en innkommende nettverkstilkobling."
#. +> trunk5
#: core/job_error.cpp:768
#, kde-format
msgid "You may not have permissions to accept the connection."
msgstr "Du har kanskje ikke rettighet til å ta i mot tilkoblingen."
#. +> trunk5
#: core/job_error.cpp:773
#, kde-format
msgid "Could Not Login: %1"
msgstr "Klarte ikke logge inn: %1"
#. +> trunk5
#: core/job_error.cpp:774
#, kde-format
msgid "An attempt to login to perform the requested operation was unsuccessful."
msgstr "Et forsøk på å logge inn for å utføre den forespurte operasjonen mislyktes."
#. +> trunk5
#: core/job_error.cpp:785
#, kde-format
msgid "Could Not Determine Resource Status"
msgstr "Klarte ikke finne ut ressursens tilstand"
#. +> trunk5
#: core/job_error.cpp:786
#, kde-format
msgid "Could Not Stat Resource"
msgstr "Klarte ikke avgjøre tilstanden til ressursen"
#. +> trunk5
#: core/job_error.cpp:787
#, kde-format
msgid "An attempt to determine information about the status of the resource <strong>%1</strong>, such as the resource name, type, size, etc., was unsuccessful."
msgstr "Et forsøk på å finne informasjon om tilstanden til ressursen <strong>%1</strong> mislyktes. Slik informasjon kan f.eks. være navn, type, størrelse, osv. til ressursen."
#. +> trunk5
#: core/job_error.cpp:790
#, kde-format
msgid "The specified resource may not have existed or may not be accessible."
msgstr "Den valgte ressursen finnes kanskje ikke eller er muligens ikke lesbar."
#. i18n( "Could not terminate listing %1" ).arg( errorText );
#. +> trunk5
#: core/job_error.cpp:798
#, kde-format
msgid "Could Not Cancel Listing"
msgstr "Klarte ikke avbryte listing"
#. +> trunk5
#: core/job_error.cpp:799
#, kde-format
msgid "FIXME: Document this"
msgstr "FIKSMEG: Dokumenter dette"
#. +> trunk5
#: core/job_error.cpp:803
#, kde-format
msgid "Could Not Create Folder"
msgstr "Klarte ikke opprette mappe"
#. +> trunk5
#: core/job_error.cpp:804
#, kde-format
msgid "An attempt to create the requested folder failed."
msgstr "Et forsøk på å opprette den etterspurte mappa mislyktes."
#. +> trunk5
#: core/job_error.cpp:805
#, kde-format
msgid "The location where the folder was to be created may not exist."
msgstr "Stedet der mappa skulle opprettes finnes kanskje ikke."
#. +> trunk5
#: core/job_error.cpp:814
#, kde-format
msgid "Could Not Remove Folder"
msgstr "Klarte ikke fjerne mappe"
#. +> trunk5
#: core/job_error.cpp:815
#, kde-format
msgid "An attempt to remove the specified folder, <strong>%1</strong>, failed."
msgstr "Et forsøk på å flytte den valgte mappa <strong>%1</strong> mislyktes."
#. +> trunk5
#: core/job_error.cpp:817
#, kde-format
msgid "The specified folder may not exist."
msgstr "Den valgte mappa finnes kanskje ikke."
#. +> trunk5
#: core/job_error.cpp:818
#, kde-format
msgid "The specified folder may not be empty."
msgstr "Den valgte mappa er kanskje ikke tom."
#. +> trunk5
#: core/job_error.cpp:823
#, kde-format
msgid "Ensure that the folder exists and is empty, and try again."
msgstr "Se til at mappa finnes og er tom før du prøver igjen."
#. +> trunk5
#: core/job_error.cpp:828
#, kde-format
msgid "Could Not Resume File Transfer"
msgstr "Klarte ikke gjenoppta filoverføring"
#. +> trunk5
#: core/job_error.cpp:829
#, kde-format
msgid "The specified request asked that the transfer of file <strong>%1</strong> be resumed at a certain point of the transfer. This was not possible."
msgstr "Forespørselen krevde at overføring av fila <strong>%1</strong> ble gjenopptatt på et bestemt sted i overføringen. Dette var ikke mulig."
#. +> trunk5
#: core/job_error.cpp:832
#, kde-format
msgid "The protocol, or the server, may not support file resuming."
msgstr "Protokollen eller tjeneren støtter kanskje ikke gjenopptatte overføringer."
#. +> trunk5
#: core/job_error.cpp:834
#, kde-format
msgid "Retry the request without attempting to resume transfer."
msgstr "Prøv en gang til uten å ta gjenoppta overføringen."
#. +> trunk5
#: core/job_error.cpp:839
#, kde-format
msgid "Could Not Rename Resource"
msgstr "Klarte ikke endre navnet på ressursen"
#. +> trunk5
#: core/job_error.cpp:840
#, kde-format
msgid "An attempt to rename the specified resource <strong>%1</strong> failed."
msgstr "Et forsøk på å endre navnet på den valgte ressursen <strong>%1</strong> mislyktes."
#. +> trunk5
#: core/job_error.cpp:850
#, kde-format
msgid "Could Not Alter Permissions of Resource"
msgstr "Klarte ikke endre rettigheter for ressursen"
#. +> trunk5
#: core/job_error.cpp:851
#, kde-format
msgid "An attempt to alter the permissions on the specified resource <strong>%1</strong> failed."
msgstr "Et forsøk på å endre tilgangsrettigheten til den valgte ressursen <strong>%1</strong> mislyktes."
#. +> trunk5
#: core/job_error.cpp:858
#, kde-format
msgid "Could Not Change Ownership of Resource"
msgstr "Klarte ikke endre rettigheter for ressursen"
#. +> trunk5
#: core/job_error.cpp:859
#, kde-format
msgid "An attempt to change the ownership of the specified resource <strong>%1</strong> failed."
msgstr "Et forsøk på å endre tilgangsrettigheten til den valgte ressursen <strong>%1</strong> mislyktes."
#. +> trunk5
#: core/job_error.cpp:866
#, kde-format
msgid "Could Not Delete Resource"
msgstr "Klarte ikke slette ressursen"
#. +> trunk5
#: core/job_error.cpp:867
#, kde-format
msgid "An attempt to delete the specified resource <strong>%1</strong> failed."
msgstr "Et forsøk på å slette den valgte ressursen <strong>%1</strong> mislyktes."
#. +> trunk5
#: core/job_error.cpp:874
#, kde-format
msgid "Unexpected Program Termination"
msgstr "Uventet programslutt"
#. +> trunk5
#: core/job_error.cpp:875
#, kde-format
msgid "The program on your computer which provides access to the <strong>%1</strong> protocol has unexpectedly terminated."
msgstr "Programmet som gir tilgang til protokollen <strong>%1</strong> har avsluttet på en uventet måte."
#. +> trunk5
#: core/job_error.cpp:883
#, kde-format
msgid "Out of Memory"
msgstr "Ikke nok minne"
#. +> trunk5
#: core/job_error.cpp:884
#, kde-format
msgid "The program on your computer which provides access to the <strong>%1</strong> protocol could not obtain the memory required to continue."
msgstr "Programmet som gir tilgang til protokollen <strong>%1</strong> har ikke nok minne til å fortsette."
#. +> trunk5
#: core/job_error.cpp:892
#, kde-format
msgid "Unknown Proxy Host"
msgstr "Ukjent mellomtjener"
#. +> trunk5
#: core/job_error.cpp:893
#, kde-format
msgid "While retrieving information about the specified proxy host, <strong>%1</strong>, an Unknown Host error was encountered. An unknown host error indicates that the requested name could not be located on the Internet."
msgstr "Ved henting av informasjon om mellomtjeneren <strong>%1</strong>, oppsto feilen «ukjent vert». En slik feil antyder at navnet på tjeneren ikke ble funnet på Internett."
#. +> trunk5
#: core/job_error.cpp:897
#, kde-format
msgid "There may have been a problem with your network configuration, specifically your proxy's hostname. If you have been accessing the Internet with no problems recently, this is unlikely."
msgstr "Det kan være et problem med nettverksoppsettet, nærmere bestemt vertsnavnet til mellomtjeneren. Dersom du nylig har hatt tilgang til Internett uten problemer er det trolig ikke årsaken."
#. +> trunk5
#: core/job_error.cpp:901
#, kde-format
msgid "Double-check your proxy settings and try again."
msgstr "Dobbeltsjekk mellomtjenerinnstillingene og prøv igjen."
#. +> trunk5
#: core/job_error.cpp:906
#, kde-format
msgid "Authentication Failed: Method %1 Not Supported"
msgstr "Feil ved autentisering, Metoden %1 er ikke støttet"
#. +> trunk5
#: core/job_error.cpp:908
#, kde-format
msgid "Although you may have supplied the correct authentication details, the authentication failed because the method that the server is using is not supported by the KDE program implementing the protocol %1."
msgstr "Selv om du kan ha oppgitt riktige autentiseringsdetaljer, kan autentiseringen ha mislyktes fordi KDE-programmet som implementerer protokollen %1 ikke støtter metoden som tjeneren bruker."
#. +> trunk5
#: core/job_error.cpp:912
#, fuzzy, kde-format
#| msgid "Please file a bug at <a href=\"http://bugs.kde.org/\">http://bugs.kde.org/</a> to inform the KDE team of the unsupported authentication method."
msgid "Please file a bug at <a href=\"https://bugs.kde.org/\">https://bugs.kde.org/</a> to inform the KDE team of the unsupported authentication method."
msgstr "Rapporter gjerne en feil på <a href=\"http://bugs.kde.org/\">http://bugs.kde.org/</a> for å melde fra til utviklerne om autentiseringsmetoden som ikke er støttet."
#. +> trunk5
#: core/job_error.cpp:918
#, kde-format
msgid "Request Aborted"
msgstr "Forespørsel avbrutt"
#. +> trunk5
#: core/job_error.cpp:925
#, kde-format
msgid "Internal Error in Server"
msgstr "Intern feil i tjener"
#. +> trunk5
#: core/job_error.cpp:926
#, kde-format
msgid "The program on the server which provides access to the <strong>%1</strong> protocol has reported an internal error: %2."
msgstr "Programmet på tjeneren som gir tilgang til <strong>%1</strong>-protokollen har rapportert en intern feil: %2."
#. +> trunk5
#: core/job_error.cpp:929
#, kde-format
msgid "This is most likely to be caused by a bug in the server program. Please consider submitting a full bug report as detailed below."
msgstr "En feil i tjenerprogrammet er trolig grunnen til dette. Rapporter gjerne om feilen slik det er forklart nedenfor."
#. +> trunk5
#: core/job_error.cpp:932
#, kde-format
msgid "Contact the administrator of the server to advise them of the problem."
msgstr "Kontakt tjeneradministratoren for å melde fra om problemet."
#. +> trunk5
#: core/job_error.cpp:934
#, kde-format
msgid "If you know who the authors of the server software are, submit the bug report directly to them."
msgstr "Dersom du vet hvem som har laget programmet på tjeneren, kan du sende feilrapporten direkte til dem."
#. +> trunk5
#: core/job_error.cpp:939
#, kde-format
msgid "Timeout Error"
msgstr "Tidsgrensefeil"
#. +> trunk5
#: core/job_error.cpp:940
#, kde-format
msgid ""
"Although contact was made with the server, a response was not received within the amount of time allocated for the request as follows:"
"<ul>"
"<li>Timeout for establishing a connection: %1 seconds</li>"
"<li>Timeout for receiving a response: %2 seconds</li>"
"<li>Timeout for accessing proxy servers: %3 seconds</li>"
"</ul>"
"Please note that you can alter these timeout settings in the KDE System Settings, by selecting Network Settings -> Connection Preferences."
msgstr ""
"Selv om det ble opprettet kontakt med tjeneren, kom det ikke noe svar innen den fastsatte tiden: "
"<ul>"
"<li>Tidsgrense for oppretting av samband: %1 sekund</li>"
" "
"<li>Tidsgrense for mottak av svar: %2 sekund</li>"
" "
"<li>Tidsgrense for tilgang til mellomtjenere: %3 sekund</li>"
"</ul>"
" Husk at du kan endre disse tidsgrensene i KDEs Systeminnstillinger, ved å velge Nettverksinnstillinger→Forbindelsesinnstillinger."
#. +> trunk5
#: core/job_error.cpp:951
#, kde-format
msgid "The server was too busy responding to other requests to respond."
msgstr "Tjeneren var for opptatt med å svare på andre forespørsler."
#. +> trunk5
#: core/job_error.cpp:957 core/slavebase.cpp:1487
#, kde-format
msgid "Unknown Error"
msgstr "Ukjent feil"
#. +> trunk5
#: core/job_error.cpp:958
#, kde-format
msgid "The program on your computer which provides access to the <strong>%1</strong> protocol has reported an unknown error: %2."
msgstr "Programmet som gir tilgang til <strong>%1</strong>-protokollen har rapportert en intern feil: %2."
#. +> trunk5
#: core/job_error.cpp:966
#, kde-format
msgid "Unknown Interruption"
msgstr "Ukjent avbrudd"
#. +> trunk5
#: core/job_error.cpp:967
#, kde-format
msgid "The program on your computer which provides access to the <strong>%1</strong> protocol has reported an interruption of an unknown type: %2."
msgstr "Programmet som gir tilgang til <strong>%1</strong>-protokollen har rapportert et avbrudd av ukjent type: %2."
#. +> trunk5
#: core/job_error.cpp:975
#, kde-format
msgid "Could Not Delete Original File"
msgstr "Klarte ikke slette den opprinnelige fila"
#. +> trunk5
#: core/job_error.cpp:976
#, kde-format
msgid "The requested operation required the deleting of the original file, most likely at the end of a file move operation. The original file <strong>%1</strong> could not be deleted."
msgstr "For å utføre den ønskede operasjonen var det nødvendig å slette den opprinnelige fila, trolig på slutten av en flytte-operasjon. Den opprinnelige fila <strong>%1</strong> kunne ikke slettes."
#. +> trunk5
#: core/job_error.cpp:985
#, kde-format
msgid "Could Not Delete Temporary File"
msgstr "Klarte ikke slette den midlertidige fila"
#. +> trunk5
#: core/job_error.cpp:986
#, kde-format
msgid "The requested operation required the creation of a temporary file in which to save the new file while being downloaded. This temporary file <strong>%1</strong> could not be deleted."
msgstr "For å utføre den ønskede operasjonen var det nødvendig å opprette en midlertidig fil der den nye fila ble lagret under nedlasting. Det var ikke mulig å slette denne midlertidige fila <strong>%1</strong>."
#. +> trunk5
#: core/job_error.cpp:995
#, kde-format
msgid "Could Not Rename Original File"
msgstr "Klarte ikke endre navnet på den opprinnelige fila"
#. +> trunk5
#: core/job_error.cpp:996
#, kde-format
msgid "The requested operation required the renaming of the original file <strong>%1</strong>, however it could not be renamed."
msgstr "For å utføre den ønskede operasjonen var det nødvendig å endre navnet på den opprinnelige fila <strong>%1</strong>, men det lot seg ikke gjøre."
#. +> trunk5
#: core/job_error.cpp:1004
#, kde-format
msgid "Could Not Rename Temporary File"
msgstr "Klarte ikke endre navnet på den midlertidige fila"
#. +> trunk5
#: core/job_error.cpp:1005
#, kde-format
msgid "The requested operation required the creation of a temporary file <strong>%1</strong>, however it could not be created."
msgstr "For å utføre den ønskede operasjonen var det nødvendig å opprette en midlertidig fil <strong>%1</strong>, men det lot seg ikke gjøre."
#. +> trunk5
#: core/job_error.cpp:1013
#, kde-format
msgid "Could Not Create Link"
msgstr "Klarte ikke opprette lenke"
#. +> trunk5
#: core/job_error.cpp:1014
#, kde-format
msgid "Could Not Create Symbolic Link"
msgstr "Klarte ikke opprette symbolsk lenke"
#. +> trunk5
#: core/job_error.cpp:1015
#, kde-format
msgid "The requested symbolic link %1 could not be created."
msgstr "Den etterspurte symbolske lenka %1 kunne ikke opprettes."
#. +> trunk5
#: core/job_error.cpp:1022
#, kde-format
msgid "No Content"
msgstr "Uten innhold"
#. +> trunk5
#: core/job_error.cpp:1027
#, kde-format
msgid "Disk Full"
msgstr "Full disk "
#. +> trunk5
#: core/job_error.cpp:1028
#, kde-format
msgid "The requested file <strong>%1</strong> could not be written to as there is inadequate disk space."
msgstr "Det er ikke nok diskplass til å skrive til den etterspurte fila <strong>%1</strong>."
#. +> trunk5
#: core/job_error.cpp:1030
#, kde-format
msgid "Free up enough disk space by 1) deleting unwanted and temporary files; 2) archiving files to removable media storage such as CD-Recordable discs; or 3) obtain more storage capacity."
msgstr "Lag mer ledig diskplass ved å 1) slette filer du ikke trenger; 2) arkivere filer med CD-brenner eller liknende; eller 3) skaffe deg mer diskplass."
#. +> trunk5
#: core/job_error.cpp:1037
#, kde-format
msgid "Source and Destination Files Identical"
msgstr "Kilden og målet er den samme fila"
#. +> trunk5
#: core/job_error.cpp:1038
#, kde-format
msgid "The operation could not be completed because the source and destination files are the same file."
msgstr "Operasjonen kunne ikke fullføres fordi kilden og målet er den samme fila."
#. +> trunk5
#: core/job_error.cpp:1040
#, kde-format
msgid "Choose a different filename for the destination file."
msgstr "Velg et annet filnavn for målfila."
#. +> trunk5
#: core/job_error.cpp:1044
#, kde-format
msgid "File or Folder dropped onto itself"
msgstr "Fila eller mappa ble sluppet på seg selv."
#. +> trunk5
#: core/job_error.cpp:1045
#, kde-format
msgid "The operation could not be completed because the source and destination file or folder are the same."
msgstr "Operasjonen kunne ikke fullføres fordi fila eller mappa som er kilde og mål er den samme."
#. +> trunk5
#: core/job_error.cpp:1047
#, kde-format
msgid "Drop the item into a different file or folder."
msgstr "Slipp elementet inn i en annen fil eller mappe."
#. +> trunk5
#: core/job_error.cpp:1057
#, fuzzy, kde-format
#| msgid "File or Folder dropped onto itself"
msgid "Folder moved into itself"
msgstr "Fila eller mappa ble sluppet på seg selv."
#. +> trunk5
#: core/job_error.cpp:1058
#, fuzzy, kde-format
#| msgid "The operation could not be completed because the source and destination files are the same file."
msgid "The operation could not be completed because the source can not be moved into itself."
msgstr "Operasjonen kunne ikke fullføres fordi kilden og målet er den samme fila."
#. +> trunk5
#: core/job_error.cpp:1060
#, fuzzy, kde-format
#| msgid "Drop the item into a different file or folder."
msgid "Move the item into a different folder."
msgstr "Slipp elementet inn i en annen fil eller mappe."
#. +> trunk5
#: core/job_error.cpp:1064
#, fuzzy, kde-format
#| msgid "Could not connect to server"
msgid "Could not communicate with password server"
msgstr "Klarer ikke koble til tjeneren"
#. +> trunk5
#: core/job_error.cpp:1065
#, kde-format
msgid "The operation could not be completed because the service for requesting passwords (kpasswdserver) couldn't be contacted"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:1067
#, kde-format
msgid "Try restarting your session, or look in the logs for errors from kiod."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:1071
#, kde-format
msgid "Cannot Initiate the %1 Protocol"
msgstr "Klarer ikke initiere %1-protokollen"
#. +> trunk5
#: core/job_error.cpp:1072
#, fuzzy, kde-format
#| msgid "Unable to create io-slave: %1"
msgid "Unable to Create io-slave"
msgstr "Kan ikke lage io-slave: %1"
#. +> trunk5
#: core/job_error.cpp:1073
#, fuzzy, kde-format
#| msgid "The program on your computer which provides access to the <strong>%1</strong> protocol could not be started. This is usually due to technical reasons."
msgid "The io-slave which provides access to the <strong>%1</strong> protocol could not be started. This is usually due to technical reasons."
msgstr "Klarte ikke starte programmet som gir tilgang til <strong>%1</strong>-protokollen. Dette skjer oftest på grunn av tekniske feil."
#. +> trunk5
#: core/job_error.cpp:1076
#, kde-format
msgid "klauncher could not find or start the plugin which provides the protocol.This means you may have an outdated version of the plugin."
msgid "Would you like to accept this certificate forever without being prompted?"
msgstr "Vil du for alltid godta dette sertifikatet uten spørsmål?"
#. +> trunk5
#: core/tcpslavebase.cpp:879
#, kde-format
msgid "You have indicated that you wish to accept this certificate, but it is not issued to the server who is presenting it. Do you wish to continue loading?"
msgstr "Du har oppgitt at du vil ta imot dette sertifikatet, men det er ikke utstedt til den tjeneren som presenterer det. Vil du fortsette å laste inn?"
#. +> trunk5
#: core/tcpslavebase.cpp:891
#, kde-format
msgid "SSL certificate is being rejected as requested. You can disable this in the KDE System Settings."
msgstr "SSL-sertifikatet blir avvist. Du kan endre innstillingene i KDEs Systeminnstillinger."
#. +> trunk5
#: filewidgets/kdiroperator.cpp:761
#, kde-format
msgid "A file or folder named %1 already exists."
msgstr "En fil eller mappe med navnet %1 finnes fra før."
#. +> trunk5
#: filewidgets/kdiroperator.cpp:764
#, kde-format
msgid "You do not have permission to create that folder."
msgstr "Du har ikke rettighet til å lage den mappa."
"<qt>This is the text that will appear in the Places panel.<br />"
"<br />"
"The label should consist of one or two words that will help you remember what this entry refers to. If you do not enter a label, it will be derived from the location's URL.</qt>"
msgstr ""
"<qt>Teksten som skal vises i Steder-panelet. <br />"
"<br />"
"Etiketten bør være ett eller to ord som minner deg om hvor snarveien fører. Hvis du ikke oppgir en etikett blir det avledet av URL til stedet.</qt>"
#. +> trunk5
#: filewidgets/kfileplaceeditdialog.cpp:96
#, kde-format
msgid "L&abel:"
msgstr "&Etikett:"
#. +> trunk5
#: filewidgets/kfileplaceeditdialog.cpp:98
#, kde-format
msgid "Enter descriptive label here"
msgstr "Oppgi beskrivende etikett her"
#. +> trunk5
#: filewidgets/kfileplaceeditdialog.cpp:102
#, kde-format
msgid ""
"<qt>This is the location associated with the entry. Any valid URL may be used. For example:<br />"
"<br />"
"%1<br />"
"http://www.kde.org<br />"
"ftp://ftp.kde.org/pub/kde/stable<br />"
"<br />"
"By clicking on the button next to the text edit box you can browse to an appropriate URL.</qt>"
msgstr ""
"<qt>Dette er adressen som er knyttet til oppføringa. Du kan bruke alle gyldige URL-er. Eksempel: <br />"
"<br />"
"%1 <br />"
"http://www.kde.org <br />"
"ftp://ftp.kde.org/pub/kde/stable <br />"
"<br />"
"Du kan bla deg fram til adressen ved å bruken knappen ved siden av skrivefeltet.</qt>"
#. +> trunk5
#: filewidgets/kfileplaceeditdialog.cpp:108
#, kde-format
msgid "&Location:"
msgstr "S&ted:"
#. +> trunk5
#: filewidgets/kfileplaceeditdialog.cpp:115
#, kde-format
msgid ""
"<qt>This is the icon that will appear in the Places panel.<br />"
"<br />"
"Click on the button to select a different icon.</qt>"
msgstr ""
"<qt>Dette er ikonet som blir vist i hurtigpanelet. <br />"
"<br />"
"Trykk på knappen for å velge et annet ikon.</qt>"
#. +> trunk5
#: filewidgets/kfileplaceeditdialog.cpp:118
#, kde-format
msgid "Choose an &icon:"
msgstr "Velg et &ikon:"
#. +> trunk5
#: filewidgets/kfileplaceeditdialog.cpp:137
#, kde-format
msgid "&Only show when using this application (%1)"
msgstr "&Vis bare i dette programmet (%1)"
#. +> trunk5
#: filewidgets/kfileplaceeditdialog.cpp:139
#, kde-format
msgid ""
"<qt>Select this setting if you want this entry to show only when using the current application (%1).<br />"
"<br />"
"If this setting is not selected, the entry will be available in all applications.</qt>"
msgstr ""
"<qt>Bruk denne innstillinga dersom du vil at oppføringa bare synes når du bruker dette programmet (%1). <br />"
"<br />"
"Hvis ikke, blir oppføringa tilgjengelig i alle programmer.</qt>"
msgid "<qt>While typing in the text area, you may be presented with possible matches. This feature can be controlled by clicking with the right mouse button and selecting a preferred mode from the <b>Text Completion</b> menu.</qt>"
msgstr "<qt>Mens du skriver i tekstområdet, kan du få se mulige fullføringer. Du kan styre funksjonen ved å trykke høyre museknapp og velge modusen du vil bruke fra menyen <b>Tekstfullføring</b>.</qt>"
#. +> trunk5
#: filewidgets/kfilewidget.cpp:407
#, kde-format
msgid "Drive: %1"
msgstr "Lagringsenhet: %1"
#. +> trunk5
#: filewidgets/kfilewidget.cpp:465
#, fuzzy, kde-format
#| msgid ""
#| "<qt>Click this button to enter the parent folder.<br />"
#| "<br />"
#| "For instance, if the current location is file:/home/%1 clicking this button will take you to file:/home.</qt>"
msgid ""
"<qt>Click this button to enter the parent folder.<br />"
"<br />"
"For instance, if the current location is file:/home/konqi clicking this button will take you to file:/home.</qt>"
msgstr ""
"<qt>Bruk denne knappen for å gå opp til foreldremappa.<br />"
"<br />"
"Dersom du nå f.eks. er i file:/home/%1, vil denne knappen føre deg til file:/home.</qt>"
#. +> trunk5
#: filewidgets/kfilewidget.cpp:469
#, kde-format
msgid "Click this button to move backwards one step in the browsing history."
msgstr "Bruk denne knappen for å gå tilbake ett steg i nettleserhistorien."
#. +> trunk5
#: filewidgets/kfilewidget.cpp:470
#, kde-format
msgid "Click this button to move forward one step in the browsing history."
msgstr "Bruk denne knappen for å gå fram ett steg i nettleserhistorien."
#. +> trunk5
#: filewidgets/kfilewidget.cpp:472
#, kde-format
msgid "Click this button to reload the contents of the current location."
msgstr "Bruk denne knappen for å laste innholdet på nytt."
#. +> trunk5
#: filewidgets/kfilewidget.cpp:474
#, kde-format
msgid "Click this button to create a new folder."
msgstr "Bruk denne knappen for å opprette en ny mappe."
#. +> trunk5
#: filewidgets/kfilewidget.cpp:480
#, fuzzy, kde-format
#| msgid "Show Places Navigation Panel"
msgid "Show Places Panel"
msgstr "Vis hurtigpanel"
#. +> trunk5
#: filewidgets/kfilewidget.cpp:487
#, fuzzy, kde-format
msgid "Show Bookmarks Button"
msgstr "Vis bokmerke-knapp"
#. +> trunk5
#: filewidgets/kfilewidget.cpp:493
#, kde-format
msgid "Options"
msgstr "Alternativer"
#. +> trunk5
#: filewidgets/kfilewidget.cpp:495
#, fuzzy, kde-format
#| msgid ""
#| "<qt>This is the preferences menu for the file dialog. Various options can be accessed from this menu including: "
#| "<ul>"
#| "<li>how files are sorted in the list</li>"
#| "<li>types of view, including icon and list</li>"
#| "<li>showing of hidden files</li>"
#| "<li>the Places navigation panel</li>"
#| "<li>file previews</li>"
#| "<li>separating folders from files</li>"
#| "</ul>"
#| "</qt>"
msgid ""
"<qt>This is the preferences menu for the file dialog. Various options can be accessed from this menu including: "
"<ul>"
"<li>how files are sorted in the list</li>"
"<li>types of view, including icon and list</li>"
"<li>showing of hidden files</li>"
"<li>the Places panel</li>"
"<li>file previews</li>"
"<li>separating folders from files</li>"
"</ul>"
"</qt>"
msgstr ""
"<qt>Dette er oppsettsmenyen for fildialogen. Her finner du diverse innstillinger, som f.eks: "
"<ul>"
"<li>Hvordan filer blir sortert i lista;</li>"
" "
"<li>Ulike visningstyper, f.eks. ikon eller liste;</li>"
msgid "The selected URL uses an unsupported scheme. Please use the following scheme: %2"
msgid_plural "The selected URL uses an unsupported scheme. Please use one of the following schemes: %2"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5
#: filewidgets/kfilewidget.cpp:1028
#, fuzzy, kde-format
#| msgid "Unsupported Key"
msgid "Unsupported URL scheme"
msgstr "Ustøttet tast"
#. +> trunk5
#: filewidgets/kfilewidget.cpp:1043
#, kde-format
msgid "More than one folder has been selected and this dialog does not accept folders, so it is not possible to decide which one to enter. Please select only one folder to list it."
msgstr "Det er valgt mer enn én mappe og dette dialogvinduet godtar ikke mapper, så det er ikke mulig å avgjøre hvilken mappe en skal gå inn i. Velg bare én mappe for å få listet den."
#. +> trunk5
#: filewidgets/kfilewidget.cpp:1043
#, kde-format
msgid "More than one folder provided"
msgstr "Angitt mer enn én mappe"
#. +> trunk5
#: filewidgets/kfilewidget.cpp:1051
#, kde-format
msgid "At least one folder and one file has been selected. Selected files will be ignored and the selected folder will be listed"
msgstr "Minst én mappe og en fil er valgt. Valgte filer blir ignorerte og den valgte mappa blir listet."
#. +> trunk5
#: filewidgets/kfilewidget.cpp:1051
#, kde-format
msgid "Files and folders selected"
msgstr "Filer og mapper valgt"
#. +> trunk5
#: filewidgets/kfilewidget.cpp:1069
#, kde-format
msgid "The file \"%1\" could not be found"
msgstr "Fant ikke fila «%1»"
#. +> trunk5
#: filewidgets/kfilewidget.cpp:1069
#, kde-format
msgid "Cannot open file"
msgstr "Kan ikke åpne fila"
#. +> trunk5
#: filewidgets/kfilewidget.cpp:1353
#, kde-format
msgid "This is the name to save the file as."
msgstr "Fila skal lagres med dette navnet."
#. +> trunk5
#: filewidgets/kfilewidget.cpp:1356
#, kde-format
msgid "This is the list of files to open. More than one file can be specified by listing several files, separated by spaces."
msgstr "Liste over filer som skal åpnes. Du kan velge flere enn en fil ved å skrive inn flere filnavn med mellomrom mellom."
#. +> trunk5
#: filewidgets/kfilewidget.cpp:1361
#, kde-format
msgid "This is the name of the file to open."
msgstr "Navnet på fila som skal åpnes."
#. +> trunk5
#: filewidgets/kfilewidget.cpp:1375
#, kde-format
msgctxt "@title:window"
msgid "Places"
msgstr "Steder"
#. +> trunk5
#: filewidgets/kfilewidget.cpp:1583
#, kde-format
msgid "The file \"%1\" already exists. Do you wish to overwrite it?"
msgstr "Fila «%1» finnes fra før. Vil du skrive over den?"
"This option enables some convenient features for saving files with extensions:<br />"
"<ol>"
"<li>Any extension specified in the <b>%1</b> text area will be updated if you change the file type to save in.<br />"
"<br />"
"</li>"
"<li>If no extension is specified in the <b>%2</b> text area when you click <b>Save</b>, %3 will be added to the end of the filename (if the filename does not already exist). This extension is based on the file type that you have chosen to save in.<br />"
"<br />"
"If you do not want KDE to supply an extension for the filename, you can either turn this option off or you can suppress it by adding a period (.) to the end of the filename (the period will be automatically removed).</li>"
"</ol>"
"If unsure, keep this option enabled as it makes your files more manageable."
msgstr ""
"Dette valget slår på noen bekvemmeligheter for lagring av filer med etternavn:<br />"
"<ol>"
"<li>Et etternavn oppgitt i skrivefeltet <b>%1</b> blir oppdatert hvis du endrer filtypen det skal lagres med.<br />"
"<br />"
"</li>"
"<li>Hvis det ikke er oppgitt noe etternavn i skrivefeltet <b>%2</b> når du trykker <b>Lagre</b>, så blir %3 lagt til slutten av filnavnet (hvis filnavnet ikke allerede finnes). Dette etternavnet er basert på filtypen som du har valgt som lagringstype. <br />"
" <br />"
" Hvis du ikke vil at KDE skal sette på et etternavn for filnavnet, så kan du enten slå av dette valget, eller undertrykke det ved å legge til et punktum (.) til filnavnet (punktumet blir automatisk fjernet).</li>"
"</ol>"
" Hvis du ikke er sikker, så behold valget slått på, fordi det gjør det lettere å holde styr på filene dine."
#. +> trunk5
#: filewidgets/kfilewidget.cpp:2676
#, kde-format
msgid "Bookmarks"
msgstr "Bokmerker"
#. +> trunk5
#: filewidgets/kfilewidget.cpp:2680
#, kde-format
msgid ""
"<qt>This button allows you to bookmark specific locations. Click on this button to open the bookmark menu where you may add, edit or select a bookmark.<br />"
"<br />"
"These bookmarks are specific to the file dialog, but otherwise operate like bookmarks elsewhere in KDE.</qt>"
msgstr ""
"<qt>Med denne knappen kan du sette bokmerker på visse adresser. Dersom du trykker på knappen, får du se en bokmerkemeny der du kan legge til, endre eller velge et bokmerke. <br />"
"<br />"
"Disse bokmerkene gjelder bare for fildialogen, men fungerer ellers som vanlige KDE-bokmerker.</qt>"
#. +> trunk5
#: filewidgets/kfilewidget.cpp:2823
#, fuzzy, kde-format
#| msgid "&File types:"
msgid "&File type:"
msgstr "&Filtyper:"
#. +> trunk5
#: filewidgets/kfilewidget.cpp:2824
#, kde-format
msgid "<qt>This is the file type selector. It is used to select the format that the file will be saved as.</qt>"
msgstr ""
#. +> trunk5
#: filewidgets/kfilewidget.cpp:2826
#, kde-format
msgid "&Filter:"
msgstr "&Filter:"
#. +> trunk5
#: filewidgets/kfilewidget.cpp:2827
#, kde-format
msgid ""
"<qt>This is the filter to apply to the file list. File names that do not match the filter will not be shown."
"<p>You may select from one of the preset filters in the drop down menu, or you may enter a custom filter directly into the text area.</p>"
"<p>Wildcards such as * and ? are allowed.</p>"
"</qt>"
msgstr ""
"<qt>Filteret som skal brukes på fillista. Bare filnavn som passer med mønsteret blir vist. "
"<p>Du kan velge fra ett av de forhåndsdefinerte filtrene i nedtrekkslista eller skrive inn ditt eget filter i skrivefeltet.</p>"
"<p>Jokertegn som * og ? kan brukes i filteret.</p>"
"</qt>"
#. +> trunk5
#: filewidgets/knewfilemenu.cpp:390
#, kde-format
msgid "Sorry"
msgstr "Beklager"
#. +> trunk5
#: filewidgets/knewfilemenu.cpp:399
#, kde-format
msgid "<qt>The template file <b>%1</b> does not exist.</qt>"
"Could not create a folder with the name <filename>%1</filename><nl/>"
"because it is reserved for use by the operating system."
msgstr ""
#. +> trunk5
#: filewidgets/knewfilemenu.cpp:1055
#, kde-kuit-format
msgctxt "@info"
msgid "The name <filename>%1</filename> cannot be used because it is reserved for use by the operating system."
msgstr ""
#. +> trunk5
#: filewidgets/knewfilemenu.cpp:1063
#, kde-kuit-format
msgctxt "@info"
msgid "The name <filename>%1</filename> starts with a dot, so it will be hidden by default."
msgstr ""
#. +> trunk5
#: filewidgets/knewfilemenu.cpp:1080
#, kde-format
msgid "Using slashes in folder names will create sub-folders, like so:"
msgstr ""
#. +> trunk5
#: filewidgets/knewfilemenu.cpp:1090
#, kde-format
msgid "Using slashes in folder names will create sub-folders."
msgstr ""
#. +> trunk5
#: filewidgets/knewfilemenu.cpp:1102
#, kde-format
msgid "Slashes cannot be used in file and folder names."
msgstr ""
#. +> trunk5
#: filewidgets/knewfilemenu.cpp:1108
#, kde-format
msgid "Backslashes cannot be used in file and folder names."
msgstr ""
#. +> trunk5
#: filewidgets/knewfilemenu.cpp:1117
#, kde-format
msgid "Starting a file or folder name with a tilde is not recommended because it may be confusing or dangerous when using the terminal to delete things."
msgid "A resource cannot be created at the destination until one or more intermediate collections (folders) have been created."
msgstr "En ressurs kan ikke opprettes på målet før en eller flere mellomsamlinger (mapper) er opprettet."
#. +> trunk5
#: ioslaves/http/http.cpp:1687
#, fuzzy, kde-format
#| msgid "The server was unable to maintain the liveness of the properties listed in the propertybehavior XML element or you attempted to overwrite a file while requesting that files are not overwritten. %1"
msgid ""
"The server was unable to maintain the liveness of the properties listed in the propertybehavior XML element\n"
" or you attempted to overwrite a file while requesting that files are not overwritten.\n"
" %1"
msgstr "Tjeneren kunne ikke opprettholde egenskapene fra XML-elementet «propertybehavior», eller du prøvde å skrive over en fil samtidig som du krevde at filer ikke skulle skrives over. %1"
#. +> trunk5
#: ioslaves/http/http.cpp:1695
#, kde-format
msgid "The requested lock could not be granted. %1"
msgstr "Den forespurte låsen kunne ikke innvilges. %1"
#. +> trunk5
#: ioslaves/http/http.cpp:1701
#, kde-format
msgid "The server does not support the request type of the body."
msgstr "Tjeneren støtter ikke denne typen forespørsel."
msgid "The destination resource does not have sufficient space to record the state of the resource after the execution of this method."
msgstr "Målressursen har ikke nok plass til å ta vare på tilstanden til ressursen etter at denne metoden er kjørt."
#. +> trunk5
#: ioslaves/http/http.cpp:1777
#, kde-format
msgid "The resource cannot be deleted."
msgstr "Ressursen kan ikke slettes."
#. +> trunk5
#: ioslaves/http/http.cpp:1790
#, kde-format
msgctxt "request type"
msgid "upload %1"
msgstr "Laster opp %1"
#. +> trunk5
#: ioslaves/http/http.cpp:1840
#, kde-format
msgctxt "%1: response code, %2: request type"
msgid "An unexpected error (%1) occurred while attempting to %2."
msgstr "En uventet feil (%1) oppstod ved forsøk på %2."
#. +> trunk5
#: ioslaves/http/http.cpp:2657
#, kde-format
msgid "%1 contacted. Waiting for reply..."
msgstr "%1 kontaktet. Venter på svar …"
#. +> trunk5
#: ioslaves/http/http.cpp:3001
#, kde-format
msgctxt "@info Security check on url being accessed"
msgid ""
"<p>You are about to log in to the site \"%1\" with the username \"%2\", but the website does not require authentication. This may be an attempt to trick you.</p>"
"<p>Is \"%1\" the site you want to visit?</p>"
msgstr ""
"<p>Du er i ferd med å logge inn til nettstedet «%1» med brukernavn «%2», men nettstedet krever ikke autentisering. Dette kan være et forsøk på å lure deg.</p>"
"<p>Er «%1» det nettstedet du vil besøke?</p>"
#. +> trunk5
#: ioslaves/http/http.cpp:3007
#, kde-format
msgctxt "@title:window"
msgid "Confirm Website Access"
msgstr "Bekreft tilgang til nettsted"
#. +> trunk5
#: ioslaves/http/http.cpp:3096
#, kde-format
msgid "Server processing request, please wait..."
msgstr "Tjeneren behandler forespørselen, vent litt …"
msgstr "Vis eller endre informasjon om informasjonskapselen"
#. +> trunk5
#: ioslaves/http/kcookiejar/kcookiewin.cpp:120
#, kde-format
msgid "Accept for this &session"
msgstr "Godta for &denne økta"
#. +> trunk5
#: ioslaves/http/kcookiejar/kcookiewin.cpp:123
#, kde-format
msgid "Accept cookie(s) until the end of the current session"
msgstr "Ta imot informasjonskapsler til denne økta er slutt"
#. +> trunk5
#: ioslaves/http/kcookiejar/kcookiewin.cpp:133
#, kde-format
msgid "&Accept"
msgstr "&Godta"
#. +> trunk5
#: ioslaves/http/kcookiejar/kcookiewin.cpp:136
#, kde-format
msgid "&Reject"
msgstr "&Nekt"
#. +> trunk5
#: ioslaves/http/kcookiejar/kcookiewin.cpp:172
#, kde-format
msgid "Apply Choice To"
msgstr "Bruk på"
#. +> trunk5
#: ioslaves/http/kcookiejar/kcookiewin.cpp:175
#, kde-format
msgid "&Only this cookie"
msgstr "&Bare denne informasjonskapselen"
#. +> trunk5
#: ioslaves/http/kcookiejar/kcookiewin.cpp:175
#, kde-format
msgid "&Only these cookies"
msgstr "&Bare disse informasjonskapslene"
#. +> trunk5
#: ioslaves/http/kcookiejar/kcookiewin.cpp:179
#, kde-format
msgid "Select this option to only accept or reject this cookie. You will be prompted again if you receive another cookie."
msgstr "Velg dette for å ta imot eller avvise denne informasjonskapselen. Du blir spurt igjen dersom du får flere informasjonskapsler."
#. +> trunk5
#: ioslaves/http/kcookiejar/kcookiewin.cpp:182
#, kde-format
msgid "All cookies from this do&main"
msgstr "Alle informasjonskapsler fra dette do&menet"
#. +> trunk5
#: ioslaves/http/kcookiejar/kcookiewin.cpp:185
#, kde-format
msgid "Select this option to accept or reject all cookies from this site. Choosing this option will add a new policy for the site this cookie originated from. This policy will be permanent until you manually change it from the System Settings."
msgstr "Velg dette for å ta imot eller avvise alle informasjonskapsler fra dette nettstedet. I så fall blir en ny praksis sett for nettstedet. Praksisen gjelder til du endrer den manuelt fra Systeminnstillinger. <em>(Se Nettsurfing/Informasjonskapsler i Systeminnstillinger.)</em>."
#. +> trunk5
#: ioslaves/http/kcookiejar/kcookiewin.cpp:190
#, kde-format
msgid "All &cookies"
msgstr "Alle &informasjonskapsler"
#. +> trunk5
#: ioslaves/http/kcookiejar/kcookiewin.cpp:193
#, kde-format
msgid "Select this option to accept/reject all cookies from anywhere. Choosing this option will change the global cookie policy for all cookies until you manually change it from the System Settings."
msgstr "Velg dette for alltid å ta imot eller avvise informasjonskapsler fra alle nettsteder. Dette endrer den globale praksisen og gjelder alle informasjonskapsler til du endrer det manuelt fra Systeminnstillinger."
msgstr "Vis detaljer om den neste informasjonskapselen"
#. +> trunk5
#: ioslaves/http/kcookiejar/kcookiewin.cpp:343
#, kde-format
msgid "Not specified"
msgstr "Ikke oppgitt"
#. +> trunk5
#: ioslaves/http/kcookiejar/kcookiewin.cpp:352
#, kde-format
msgid "End of Session"
msgstr "Når økten slutter"
#. +> trunk5
#: ioslaves/http/kcookiejar/kcookiewin.cpp:357
#, kde-format
msgid "Secure servers only"
msgstr "Bare sikrede tjenere "
#. +> trunk5
#: ioslaves/http/kcookiejar/kcookiewin.cpp:359
#, kde-format
msgid "Secure servers, page scripts"
msgstr "Sikrede tjenere, sideskript"
#. +> trunk5
#: ioslaves/http/kcookiejar/kcookiewin.cpp:363
#, kde-format
msgid "Servers"
msgstr "Tjenere"
#. +> trunk5
#: ioslaves/http/kcookiejar/kcookiewin.cpp:365
#, kde-format
msgid "Servers, page scripts"
msgstr "Tjenere, sideskript"
#. +> trunk5
#: ioslaves/remote/remoteimpl.cpp:157
#, fuzzy, kde-format
msgid "Add Network Folder"
msgstr "Legg til ei nettverksmappe"
#. +> trunk5
#: ioslaves/telnet/ktelnetservice.cpp:65
#, kde-format
msgid "Access denied"
msgstr "Tilgang nektes"
#. +> trunk5
#: ioslaves/telnet/ktelnetservice.cpp:66
#, kde-format
msgid "You do not have permission to access the %1 protocol."
msgstr "Du har ikke tilgang til protokollen %1."
#. +> trunk5
#: ioslaves/trash/kcmtrash.cpp:157
#, kde-format
msgid " days"
msgstr " dager"
#. +> trunk5
#: ioslaves/trash/kcmtrash.cpp:221
#, kde-format
msgid ""
"<para>KDE's wastebin is configured to use the <b>Finder</b>'s Trash.<br>"
"</para>"
msgstr ""
"<para>KDEs søppelkasse er satt opp til å bruke <b>Finder</b>s Trash,<br>"
" </para>"
#. +> trunk5
#: ioslaves/trash/kcmtrash.cpp:223
#, kde-format
msgctxt "@info:whatsthis"
msgid ""
"<para>Emptying KDE's wastebin will remove only KDE's trash items, while<br>"
"emptying the Trash through the Finder will delete everything.</para>"
"<para>KDE's trash items will show up in a folder called KDE.trash, in the Trash can.</para>"
msgstr ""
"<para>Når KDEs søppelbøtte tømmes blir bare det som er slettet i KDE<br>"
" fjernet, mens hvis Trash tømmes gjennom Finder blir alt slettet,</para>"
" "
"<para>Det som er slettet i KDE synes i mappa KDE.trash, inne i Trash-bøtta.</para>"
#. +> trunk5
#: ioslaves/trash/kcmtrash.cpp:260
#, fuzzy, kde-format
#| msgid "Delete files older than:"
msgid "Delete files older than"
msgstr "Slett filer eldre enn :"
#. +> trunk5
#: ioslaves/trash/kcmtrash.cpp:262
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid "<para>Check this box to allow <emphasis strong='true'>automatic deletion</emphasis> of files that are older than the value specified. Leave this disabled to <emphasis strong='true'>not</emphasis> automatically delete any items after a certain timespan</para>"
msgstr ""
#. +> trunk5
#: ioslaves/trash/kcmtrash.cpp:269
#, kde-format
msgid " day"
msgid_plural " days"
msgstr[0] " dag"
msgstr[1] " dager"
#. +> trunk5
#: ioslaves/trash/kcmtrash.cpp:271
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid "<para>Set the number of days that files can remain in the trash. Any files older than this will be automatically deleted.</para>"
msgstr "<para>Angi antall dager filer kan ligge i papirkurven. Filer som er eldre enn dette vil bli slettet akutomatisk.</para>"
#. +> trunk5
#: ioslaves/trash/kcmtrash.cpp:275
#, fuzzy, kde-format
#| msgid "Cleaned up"
msgid "Cleanup:"
msgstr "Ryddet opp"
#. +> trunk5
#: ioslaves/trash/kcmtrash.cpp:279
#, kde-format
msgid "Limit to"
msgstr "Avgrens til"
#. +> trunk5
#: ioslaves/trash/kcmtrash.cpp:281
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid "<para>Check this box to limit the trash to the maximum amount of disk space that you specify below. Otherwise, it will be unlimited.</para>"
msgstr "<para>Kryss av her for å begrense papirkurven til så mye diskplass som du oppgir nedenfor. Ellers blir den ubegrenset.</para>"
msgid "<para>This is the maximum percent of disk space that will be used for the trash.</para>"
msgstr "<para>Dette er høyeste prosent av diskplassen som kan brukes til papirkurven.</para>"
#. +> trunk5
#: ioslaves/trash/kcmtrash.cpp:298
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid "<para>This is the calculated amount of disk space that will be allowed for the trash, the maximum.</para>"
msgstr "<para>Dette er den beregnede del av diskplassen som kan brukes til papirkurven, maksimalt.</para>"
#. +> trunk5
#: ioslaves/trash/kcmtrash.cpp:303
#, kde-format
msgid "Show a Warning"
msgstr ""
#. +> trunk5
#: ioslaves/trash/kcmtrash.cpp:304
#, kde-format
msgid "Delete Oldest Files From Trash"
msgstr "Slett eldste filer fra papirkurven"
#. +> trunk5
#: ioslaves/trash/kcmtrash.cpp:305
#, kde-format
msgid "Delete Biggest Files From Trash"
msgstr "Slett største filer fra papirkurven"
#. +> trunk5
#: ioslaves/trash/kcmtrash.cpp:307
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid "<para>When the size limit is reached, it will prefer to delete the type of files that you specify, first. If this is set to warn you, it will do so instead of automatically deleting files.</para>"
msgstr "<para>Når grensen for størrelse er nådd vil systemet foretrekke å slette den typen fil du oppgir her. Hvis du velger å bli varslet, så vil systemet varsle deg i stedet for å slette filer automatisk.</para>"
msgid "The directory %1 does not exist anymore, so it is not possible to restore this item to its original location. You can either recreate that directory and use the restore operation again, or drag the item anywhere else to restore it."
msgstr "Mappa %1 finnes ikke lenger,så det er ikke mulig å gjenopprette dette elementet til sin opprinnelige plassering. Du kan enten opprette mappa på nytt og bruke gjenopprett-funksjonen på nytt, eller dra elementet hvor som helst for å gjenopprette det."
msgid "Internal error in copyOrMove, should never happen"
msgstr "Intern feil i copyOrMove, burde aldri hende"
#. +> trunk5
#: ioslaves/trash/ktrash.cpp:39
#, kde-format
msgid ""
"Helper program to handle the KDE trash can\n"
"Note: to move files to the trash, do not use ktrash, but \"kioclient move 'url' trash:/\""
msgstr ""
"Hjelpeprogram som behandler KDEs papirkurv\n"
"Merk: ikke bruk ktrash til å flytte filer til papirkurven, men «kioclient move 'url' trash:/»"
#. +> trunk5
#: ioslaves/trash/ktrash.cpp:42
#, kde-format
msgid "Empty the contents of the trash"
msgstr "Tøm innholdet i papirkurven"
#. +> trunk5
#: ioslaves/trash/ktrash.cpp:43
#, kde-format
msgid "Restore a trashed file to its original location"
msgstr "Tilbakefør en kastet fil til opprinnelig sted"
#. +> trunk5
#: ioslaves/trash/trashimpl.cpp:1382
#, kde-format
msgid "The file is too large to be trashed."
msgstr "Fila er for stor til å kastes i papirkurven."
#. +> trunk5
#: ioslaves/trash/trashimpl.cpp:1388
#, kde-format
msgid ""
"The trash has reached its maximum size!\n"
"Cleanup the trash manually."
msgstr ""
"Papirkurven har nådd sin maksimale størrelse.\n"
"Tøm kurven manuelt."
#. +> trunk5
#: kcms/kio/cache.cpp:113
#, kde-format
msgid ""
"<h1>Cache</h1>"
"<p>This module lets you configure your cache settings.</p>"
"<p>This specific cache is an area on the disk where recently read web pages are stored. If you want to retrieve a web page again that you have recently read, it will not be downloaded from the Internet, but rather retrieved from the cache, which is a lot faster.</p>"
msgid "Check this box if you want the web pages you visit to be stored on your hard disk for quicker access. The stored pages will only be updated as needed instead of on every visit to that site. This is especially useful if you have a slow connection to the Internet."
msgstr "Trykk her hvis du vil at nettsidene du besøker skal lagres på harddisken for raskere tilgang. Denne funksjonen gjør at surfing på WWW går raskere, siden nettsidene bare blir lastet ned når det virkelig trengs. Trege Internett-tilknytninger har spesielt stor nytte av mellomlageret."
msgid "Always use documents from the cache when available. You can still use the reload button to synchronize the cache with the remote host."
msgstr "Bruk alltid dokumenter i mellomlageret når de finnes. Du kan likevel bruke Oppdater-knappen for å synkronisere mellomlageret med vertsmaskinen."
msgid "Do not fetch web pages that are not already stored in the cache. Offline mode prevents you from viewing pages that you have not previously visited."
msgstr "Ikke hent nettsider som ikke allerede er mellomlagret. Frakoblet modus hindrer deg fra å se sider som du ikke har besøkt før."
"<p>Cookies contain information that KDE applications using the HTTP protocol (like Konqueror) store on your computer, initiated by a remote Internet server. This means that a web server can store information about you and your browsing activities on your machine for later use. You might consider this an invasion of privacy.</p>"
"<p> However, cookies are useful in certain situations. For example, they are often used by Internet shops, so you can 'put things into a shopping basket'. Some sites require you have a browser that supports cookies.</p>"
"<p> Because most people want a compromise between privacy and the benefits cookies offer, the HTTP kioslave offers you the ability to customize the way it handles cookies. So you might want to set the default policy to ask you whenever a server wants to set a cookie, allowing you to decide. For your favorite shopping web sites that you trust, you might want to set the policy to accept, then you can access the web sites without being prompted every time a cookie is received.</p>"
"Unable to communicate with the cookie handler service.\n"
"Any changes you made will not take effect until the service is restarted."
msgstr ""
"Kunne ikke kommunisere med håndteringstjenesten for informasjonskapsler.\n"
"Endringer du gjorde blir tatt i bruk neste gang du starter tjenesten."
#. +> trunk5
#: kcms/kio/kcookiespolicies.cpp:441
#, fuzzy, kde-format
#| msgid ""
#| "<p>"
#| "<h1>Cookies</h1>"
#| " Cookies contain information that Konqueror (or any other KDE application using the HTTP protocol) stores on your computer from a remote Internet server. This means that a web server can store information about you and your browsing activities on your machine for later use. You might consider this an invasion of privacy.</p>"
#| "<p>However, cookies are useful in certain situations. For example, they are often used by Internet shops, so you can 'put things into a shopping basket'. Some sites require you have a browser that supports cookies.</p>"
#| "<p>Because most people want a compromise between privacy and the benefits cookies offer, KDE offers you the ability to customize the way it handles cookies. You might, for example want to set KDE's default policy to ask you whenever a server wants to set a cookie or simply reject or accept everything. For example, you might choose to accept all cookies from your favorite shopping web site. For this all you have to do is either browse to that particular site and when you are presented with the cookie dialog box, click on <i> This domain </i> under the 'apply to' tab and choose accept or simply specify the name of the site in the <i> Domain Specific Policy </i> tab and set it to accept. This enables you to receive cookies from trusted web sites without being asked every time KDE receives a cookie.</p>"
msgid ""
"<h1>Cookies</h1>"
"<p>Cookies contain information that KDE application using the HTTP protocol (like Konqueror) stores on your computer from a remote Internet server. This means that a web server can store information about you and your browsing activities on your machine for later use. You might consider this an invasion of privacy.</p>"
"<p>However, cookies are useful in certain situations. For example, they are often used by Internet shops, so you can 'put things into a shopping basket'. Some sites require you have a browser that supports cookies.</p>"
"<p>Because most people want a compromise between privacy and the benefits cookies offer, KDE offers you the ability to customize the way it handles cookies. You might, for example want to set KDE's default policy to ask you whenever a server wants to set a cookie or simply reject or accept everything. For example, you might choose to accept all cookies from your favorite shopping web site. For this all you have to do is either browse to that particular site and when you are presented with the cookie dialog box, click on <i> This domain </i> under the 'apply to' tab and choose accept or simply specify the name of the site in the <i> Domain Specific Policy </i> tab and set it to accept. This enables you to receive cookies from trusted web sites without being asked every time KDE receives a cookie.</p>"
msgstr ""
"<p>"
"<h1>Informasjonskapsler</h1>"
"Informasjonskapsler inneholder informasjon som Konqueror (eller andre KDE-programmer som bruker http-protokollen) lagrer på datamaskinen din på forespørsel fra en annen Internett-tjener. Dette betyr at nettjeneren kan lagre informasjon om deg og dine nettvaner på din maskin for å bruke det senere. Du vil kanskje se dette som et angrep på ditt privatliv.</p>"
"<p>På den annen side er informasjonskapsler nyttig i bestemte situasjoner, f.eks. brukes de ofte av nettbutikker så du kan legge ting i en handlekurv. Noen nettsteder krever at nettleseren din bruker informasjonskapsler.</p>"
"<p>Ettersom de fleste ønsker et kompromiss mellom fordelene og ulempene med informasjonskapsler, lar KDE deg velge hvordan de skal brukes. Du vil kanskje at KDE alltid skal spørre når en tjener vil bruke en informasjonskapsel, så du selv kan bestemme. Fra nettsider du stoler på vil du kanskje godta alle kapsler. Alt du må gjøre for å få til dette, er enten å gå til nettstedet og velge <i>Dette domenet</i> på fanen «bruk for» når du får spørsmål om det. Eller du kan oppgi navnet på fanen <i>Domenespesifikke regler</i> og be den godta informasjonskapsel fra dette domenet. Dette gjør at du kan motta informasjonskapsler fra nettsider du stoler på uten å bli spurt for hver gang.</p>"
"Reject the so called third-party cookies. These are cookies that originate from a site other than the one you are currently browsing. For example, if you visit <b>www.foobar.com</b> while this option is on, only cookies that originate from www.foobar.com will be processed per your settings. Cookies from any other site will be rejected. This reduces the chances of site operators compiling a profile about your daily browsing habits.\n"
"</qt>"
msgstr ""
"<qt>\n"
"Avvis informasjonskapsler fra såkalt tredjepart. Dette er informasjonskapsler som kommer fra andre nettsteder enn det du besøker. For eksempel, hvis du besøker <b>www.foobar.com</b> med dette valget på, så vil du bare motta kapsler fra nettstedet www.foobar.com. Alle andre kapsler blir avvist. På denne måten kan du minske muligheten for at nettstedsoperatører samler opplysninger om dine Internett-vaner.\n"
"Automatically accept temporary cookies meant to expire at the end of the current session. Such cookies will not be stored in your computer's hard drive or storage device. Instead, they are deleted when you close all applications (e.g. your browser) that use them.</p>"
"<p><u>NOTE</u> Checking this option overrides your default as well as site specific cookie policies for session cookies.</p>"
msgstr ""
"<p>\n"
"Godta automatisk midlertidige informasjonskapsler som utløper ved slutten av økta. Slike kapsler blir ikke lagret på harddisk eller lagringsenheter på maskinen din, men forsvinner når du lukker alle programmer som bruker dem (f.eks. nettleseren). </p>"
"<p>\n"
"<u>MERK:</u> Krysser du av her og på neste valg, så overstyres dine standardvalg og steds-spesifikke valg. Men det øker også sikkerheten for dine personopplysninger, siden alle informasjonskapslene fjernes når du avslutter økta.</p>"
"To add a new policy, simply click on the <b>Add...</b> button and supply the necessary information. To change an existing policy, use the <b>Change...</b> button and choose the new policy from the policy dialog box. Clicking on the <b>Delete</b> button will remove the currently selected policy causing the default policy setting to be used for that domain, whereas <b>Delete All</b> will remove all the site specific policies.\n"
"</qt>"
msgstr ""
"<qt>\n"
"Trykk på <b>Legg til</b> for å legge til en ny regel, og oppgi den informasjonen som trengs i dialogboksen. Trykk på <b>Endre</b> for å endre en regel som allerede finnes og velg en ny regel fra dialogboksen. Trykk på <b>Slett</b> for å slette den valgte regelen. Da vil standard praksis bli brukt for det domenet. <b>Slett alle</b> vil fjerne alle de domenespesifikke reglene.\n"
"List of sites for which you have set a specific cookie policy. Specific policies override the default policy setting for these sites.\n"
"</qt>"
msgstr "<qt>En liste over nettsteder som du har valgt særskilte regler for. Disse reglene overstyrer standardreglene for de nettstadene de omfatter.</qt>"
#. i18n: ectx: label, entry (DisablePassiveMode), group (DesktopIcons)
#. +> trunk5
#: kcms/kio/kio_ftprc.kcfg:10
#, kde-format
msgid "Disable Passive FTP"
msgstr "Slå av passiv FTP"
#. i18n: ectx: whatsthis, entry (DisablePassiveMode), group (DesktopIcons)
#. +> trunk5
#: kcms/kio/kio_ftprc.kcfg:11
#, kde-format
msgid "When FTP connections are passive the client connects to the server, instead of the other way round, so firewalls do not block the connection; old FTP servers may not support Passive FTP though."
msgstr "Når FTP-tilkoblinger er passive er det klienten som kobler til tjeneren, i stedet for omvendt, slik at brannmurer ikke blokkerer forbindelsen, men det kan være at gamle FTP-tjenere ikke støtter Passiv FTP."
#. i18n: ectx: label, entry (MarkPartial), group (Global Options)
#. i18n: ectx: label, entry (MarkPartial), group (DesktopIcons)
msgid "While a file is being uploaded its extension is \".part\". When fully uploaded it is renamed to its real name."
msgstr "Mens en fil blir overført har den etternavnet «.part». Når overføringen er fullført, blir navnet omgjort til det virkelige navnet."
#. +> trunk5
#: kcms/kio/kproxydlg.cpp:553
#, kde-format
msgid ""
"<h1>Proxy</h1>"
"<p>A proxy server is an intermediate program that sits between your machine and the Internet and provides services such as web page caching and/or filtering.</p>"
"<p>Caching proxy servers give you faster access to sites you have already visited by locally storing or caching the content of those pages; filtering proxy servers, on the other hand, provide the ability to block out requests for ads, spam, or anything else you want to block.</p>"
"<p><u>Note:</u> Some proxy servers provide both services.</p>"
msgstr ""
"<h1>Mellomtjener</h1>"
"<p> En mellomtjener – mellomtjenermellomtjener et formidlende program som står mellom din maskin og Internett og tilbyr tjenester som mellomlagring av nettsider og/eller filtrering. </p>"
"<p>Mellomlagrende mellomtjenere gir raskere tilgang til nettsteder du har besøkt før ved å lagre midlertidig innholdet på de sidene. Filtrerende mellomtjenere gir mulighet til å blokkere sprettoppsreklame, søppelpost eller andre ting du vil stenge ute. </p>"
"<p><u>Merk:</u> Noen mellomtjenere tilbyr begge tjenester.</p>"
"A proxy server is an intermediate machine that sits between your computer and the Internet and provides services such as web page caching and filtering. Caching proxy servers give you faster access to web sites you have already visited by locally storing or caching those pages; filtering proxy servers usually provide the ability to block out requests for ads, spam, or anything else you want to block.\n"
"<p>\n"
"If you are uncertain whether or not you need to use a proxy server to connect to the Internet, consult your Internet service provider's setup guide or your system administrator.\n"
"</qt>"
msgstr ""
"<qt>\n"
"Tilpass mellomtjeneroppsett.\n"
"<p>\n"
"En mellomtjener er en datamaskin som sitter mellom ditt interne nettverk og Internett og tilbyr tjenester som mellomlagring og filtrering. Mellomlagring gir raskere tilgang til stedene du allerede har besøkt siden de lagres lokalt på mellomtjeneren din. Filtrerende mellomtjenere kan vanligvis blokkere sprettoppannonser, søppelpost eller annet du vil ha stengt ute.\n"
"<p>\n"
"Hvis du er usikker på om du trenger en mellomtjener for å koble deg til Internett, sjekk oppsettet til Internett-tilbyderen din, eller systemadministratoren.\n"
#| "Automatically detect and configure the proxy settings."
#| "<p>\n"
#| "Automatic detection is performed using the <b>Web Proxy Auto-Discovery Protocol (WPAD)</b>."
#| "<p>\n"
#| "<b>NOTE:</b> This option might not work properly or not work at all in some UNIX/Linux distributions. If you encounter a problem when using this option, please check the FAQ section at http://konqueror.kde.org.\n"
#| "</qt>"
msgid ""
"<qt>\n"
"Automatically detect and configure the proxy settings."
"<p>\n"
"Automatic detection is performed using the <b>Web Proxy Auto-Discovery Protocol (WPAD)</b>."
"<p>\n"
"<b>NOTE:</b> This option might not work properly or not work at all in some UNIX/Linux distributions. If you encounter a problem when using this option, please check the FAQ section at https://konqueror.org.\n"
"</qt>"
msgstr ""
"<qt>\n"
"Finn og sett opp mellomtjenerinnstillingene automatisk."
"<p>\n"
"Automatisk søk utføres med protokollen <b>Web Proxy Auto-Discovery Protocol (WPAD)</b>.</p>"
"\n"
"<b>MERK:</b> Dette virker kanskje ikke som det skal, eller ikke i det hele tatt, på noen Unix/Linux-distribusjoner. Hvis du får problemer med å bruke dette valget, bør du se etter i FAQ-delen på http://konqueror.kde.org/.\n"
"<p>Use proxy settings defined on the system.</p>"
"\n"
"<p>Some platforms offer system wide proxy configuration information and selecting this option allows you to use those settings.</p>"
"\n"
"<p>On Mac platforms</p>"
"\n"
"<p>On Windows platforms</p>"
"\n"
"<p>On Unix and Linux platforms, such system proxy settings are usually defined through environment variables. The following environment variables are detected and used when present: <b>HTTP_PROXY</b>, <b>HTTPS_PROXY</b>, <b>FTP_PROXY</b>, <b>NO_PROXY</b>.</p>"
"\n"
"</qt>"
msgstr ""
"<qt> "
"<p>Bruk mellomtjenerinnstillingene definert på systemet.</p>"
" \n"
"<p>På noen plattformer settes det opp mellomtjeneroppsett for hele systemet, og om du velger dette kan du bruke de innstillingene.</p>"
" \n"
"<p>På Mac-plattformer</p>"
" \n"
"<p>På Windows-plattformer</p>"
" \n"
"<p>På Unix og Linux-plattformer er slike systeminnstillinger som regel definert ved miljøvariabler. Følgende miljøvariabler oppdages og brukes hvis de er til stede: <b>HTTP_PROXY</b>, <b>HTTPS_PROXY</b>, <b>FTP_PROXY</b> og <b>NO_PROXY</b>.</p>"
"<qt>Enter the environment variable, e.g. <b>NO_PROXY</b>, used to store the addresses of sites for which the above proxy settings should not be used."
"<p>Alternatively, you can click on the <b>\"Auto Detect\"</b> button to attempt an automatic discovery of this variable.</p>"
"</qt>"
msgstr ""
"<qt>Skriv inn navnet på miljøvariabelen, f.eks. <b>NO_PROXY</b>, som brukes for å lagre adresser til steder der mellomtjener ikke skal brukes."
"<p>Du kan også trykke på <b>Finn automatisk</b>for å forsøke å finne variabelen automatisk.</p>"
"<p>Enter a comma separated list of hostnames or ip addresses that should be excluded from using the above proxy settings.</p>"
"\n"
"<p>If you want to exclude all hosts for a given domain, then simply enter the domain name preceded by a dot. For example, to exclude all hostnames for <i>kde.org</i>, enter <i>.kde.org</i>. Wildcard characters such as '*' or '?' are not supported and will have no effect.</p>"
"\n"
"<p>Additionally, you can also enter IP addresses, e.g. 127.0.0.1 and IP addresses with a subnet, e.g. 192.168.0.1/24.</p>"
"\n"
"</qt>"
msgstr ""
"<qt>\n"
"<p>Skriv inn en liste over vertsnavn eller IP-adresser der mellomtjenerinnstillingene over ikke skal brukes.</p>"
"\n"
"<p>Hvis du vil utelate alle verter i et gitt domene. så bare skriv inn domenenavnet med et punktum foran. For eksempel,for å utelate alle vertsnavn i kde.org, så bare skriv inn .kde.org. Jokertegn slik som «*» eller «?» er ikke støttet og vil ikke ha noen virkning. </p>"
"\n"
"<p>Dessuten kan du skrive inn IP-adresser, f.eks. 1270.0.1 og IP-adresser med subnet, f.eks. 192.168..1/24</p>"
msgid "You have to restart KDE for these changes to take effect."
msgstr "Du må starte KDE på nytt for at disse endringene skal tre i kraft."
#. +> trunk5
#: kcms/kio/netpref.cpp:30
#, kde-format
msgid "Timeout Values"
msgstr "Tidsavbruddsverdier"
#. +> trunk5
#: kcms/kio/netpref.cpp:31
#, kde-format
msgid "Here you can set timeout values. You might want to tweak them if your connection is very slow. The maximum allowed value is 1 second."
msgid_plural "Here you can set timeout values. You might want to tweak them if your connection is very slow. The maximum allowed value is %1 seconds."
msgstr[0] "Her kan du sette verdier for tidsavbrudd. Hvis du har en veldig langsom forbindelse kan det være at du vil endre på dem. Største tillatte verdi er 1 sekund."
msgstr[1] "Her kan du sette verdier for tidsavbrudd. Hvis du har en veldig langsom forbindelse kan det være at du vil endre på dem. Største tillatte verdi er %1 sekunder."
#| "<p>When this option is enabled, partially uploaded files will have a \".part\" extension. This extension will be removed once the transfer is complete.</p>"
msgid ""
"<p>Marks partially uploaded files through SMB, SFTP and other protocols.</p>"
"<p>When this option is enabled, partially uploaded files will have a \".part\" extension. This extension will be removed once the transfer is complete.</p>"
msgstr ""
"<p>Merker delvis overførte filer.</p>"
"<p> Når dette valget er slått på vil filer som ikke er ferdig overført få filnavn som slutter på «.part». Denne delen av filnavnet blir fjernet når overføringen er ferdig.</p>"
#. +> trunk5
#: kcms/kio/netpref.cpp:85
#, kde-format
msgid "FTP Options"
msgstr "FTP-innstiillinger"
#. +> trunk5
#: kcms/kio/netpref.cpp:89
#, kde-format
msgid "Enable passive &mode (PASV)"
msgstr "Bruk &passiv-modus (PASV)"
#. +> trunk5
#: kcms/kio/netpref.cpp:90
#, kde-format
msgid "Enables FTP's \"passive\" mode. This is required to allow FTP to work from behind firewalls."
msgstr "Slår på «passiv» modus for FTP. Dette er nødvendig for at FTP skal kunne virke når den har en brannvegg foran seg."
#. +> trunk5
#: kcms/kio/netpref.cpp:98
#, kde-format
msgid ""
"<p>Marks partially uploaded FTP files.</p>"
"<p>When this option is enabled, partially uploaded files will have a \".part\" extension. This extension will be removed once the transfer is complete.</p>"
msgstr ""
"<p>Merker delvis overførte filer.</p>"
"<p> Når dette valget er slått på vil filer som ikke er ferdig overført få filnavn som slutter på «.part». Denne delen av filnavnet blir fjernet når overføringen er ferdig.</p>"
#. +> trunk5
#: kcms/kio/netpref.cpp:173
#, kde-format
msgid ""
"<h1>Network Preferences</h1>"
"Here you can define the behavior of KDE programs when using Internet and network connections. If you experience timeouts or use a modem to connect to the Internet, you might want to adjust these settings."
msgstr ""
"<h1>Nettverksinnstillinger</h1>"
" Her kan du styre hvordan KDE-programmer oppfører seg når du bruker Internet og nettverksforbindelser. Hvis du får tidsavbrudd og problemer, eller bruker modem, kan det hjelpe å justere disse verdiene."
#. +> trunk5
#: kcms/kio/smbrodlg.cpp:47
#, kde-format
msgid "These settings apply to network browsing only."
msgstr "Disse innstillingene gjelder bare for nettlesing."
#. +> trunk5
#: kcms/kio/smbrodlg.cpp:51
#, kde-format
msgid "Default user name:"
msgstr "Standard brukernavn:"
#. +> trunk5
#: kcms/kio/smbrodlg.cpp:59
#, kde-format
msgid "Default password:"
msgstr "Standard passord:"
#. +> trunk5
#: kcms/kio/smbrodlg.cpp:178
#, kde-format
msgid ""
"<h1>Windows Shares</h1>"
"<p>Applications using the SMB kioslave (like Konqueror) are able to access shared Microsoft Windows file systems, if properly configured.</p>"
"<p>You can specify here the credentials used to access the shared resources. Passwords will be stored locally, and scrambled so as to render them unreadable to the human eye. For security reasons, you may not want to do that, as entries with passwords are clearly indicated as such.</p>"
msgstr ""
#. +> trunk5
#: kcms/kio/useragentdlg.cpp:81
#, kde-format
msgctxt "@title:window"
msgid "Add Identification"
msgstr "Legg til en identifikasjon"
#. +> trunk5
#: kcms/kio/useragentdlg.cpp:147
#, kde-format
msgctxt "@title:window"
msgid "Modify Identification"
msgstr "Endre en identifikasjon"
#. +> trunk5
#: kcms/kio/useragentdlg.cpp:195
#, kde-format
msgid ""
"<qt>"
"<center>Found an existing identification for<br/>"
"<b>%1</b><br/>"
"Do you want to replace it?</center>"
"</qt>"
msgstr ""
"<qt> "
"<center>Det finnes allerede en brukeragentstreng for<b>%1</b><br/>"
"Vil du erstatte den ?</center>"
"</qt>"
#. +> trunk5
#: kcms/kio/useragentdlg.cpp:200
#, kde-format
msgctxt "@title:window"
msgid "Duplicate Identification"
msgstr "Duplikatidentifikasjon"
#. +> trunk5
#: kcms/kio/useragentdlg.cpp:372
#, fuzzy, kde-format
#| msgid ""
#| "<p>"
#| "<h1>Browser Identification</h1>"
#| " The browser-identification module allows you to have full control over how Konqueror will identify itself to web sites you browse.</p>"
#| "<p>This ability to fake identification is necessary because some web sites do not display properly when they detect that they are not talking to current versions of either Netscape Navigator or Internet Explorer, even if the browser actually supports all the necessary features to render those pages properly. For such sites, you can use this feature to try to browse them. Please understand that this might not always work, since such sites might be using non-standard web protocols and or specifications.</p>"
#| "<p><u>NOTE:</u> To obtain specific help on a particular section of the dialog box, simply click on the quick help button on the window title bar, then click on the section for which you are seeking help.</p>"
msgid ""
"<h1>Browser Identification</h1>"
"<p>The browser-identification module allows you to have full control over how KDE applications using the HTTP protocol (like Konqueror) will identify itself to web sites you browse.</p>"
"<p>This ability to fake identification is necessary because some web sites do not display properly when they detect that they are not talking to current versions of either Netscape Navigator or Internet Explorer, even if the browser actually supports all the necessary features to render those pages properly. For such sites, you can use this feature to try to browse them. Please understand that this might not always work, since such sites might be using non-standard web protocols and or specifications.</p>"
"<p><u>NOTE:</u> To obtain specific help on a particular section of the dialog box, simply click on the quick help button on the window title bar, then click on the section for which you are seeking help.</p>"
msgstr ""
"<p>"
"<h1>Nettleser-identifikasjon</h1>"
" Modulen for nettleser-identifikasjon gir deg full kontroll over hvordan Konqueror skal identifisere seg overfor de nettsidene du surfer til.</p>"
"<p>Nettleserens mulighet for å identifisere seg som en annen nettleser er nødvendig fordi enkelte nettsider ikke vises korrekt når de identifiserer versjoner som ikke er støttet av f.eks. Netscape Navigator eller Internet Explorer, selv om nettleseren har implementert all som er nødvendig for å vise nettsidene. For disse nettsidene, kan du bruke denne funksjonen. Men det er ingen garanti for at dette vil virke, fordi det er nettsidenes ansvar å implementere nettsider som følger standardene. </p>"
"<p><u>NB:</u> For å få spesifikk hjelp til en gitt seksjon i dialogvinduet, klikk på hjelpe knappen øverst i tittellinja, for så å klikke på den seksjonen du ønsker hjelp om.</p>"
"Here you can modify the default browser-identification text or set a site <code>(eg. www.kde.org)</code> or a domain <code>(eg. kde.org)</code> specific identification text."
"<p>\n"
"To add a new site-specific identification text, click the <code>New</code> button and supply the necessary information. To change an existing site-specific entry, click on the <code>Change</code> button. The <code>Delete</code> button will remove the selected site-specific identification text, causing the default setting to be used for that site or domain.\n"
"</qt>"
msgstr ""
"<qt>\n"
"Her kan du redigere Konquerors standard brukeragentstreng, og/eller angi en brukeragentstreng spesiell for et nettsted <code>f.eks.: www.kde.org</code> eller et domene (f.eks.:<code> kde.org </code>)."
"<p>\n"
"Trykk på <code> Ny</code> for å legge inn en ny brukeragentstreng, og legg til de opplysningene som det spørres etter i dialogvinduet. Trykk på <code>Endre</code> for å endre en brukeragentstreng som er angitt fra før. <code>Slett</code>-knappen- sletter den valgte brukeragentstrengen slik at standardstrengen blir brukt for det nettstedet eller domenet.\n"
"<u>NOTE:</u> Many sites rely on this information to display pages properly, hence, it is highly recommended that you do not totally disable this feature but rather customize it."
"<p>\n"
"By default, only minimal identification information is sent to remote sites. The identification text that will be sent is shown below.\n"
"</qt>"
msgstr ""
"<qt>\n"
"Hvis denne ikke er avkrysset. sender ikke nettleseren sin brukeragent-streng til nettsteder du besøker. "
"<p>\n"
"<u>NB</u> Mange nettsteder er avhengige av brukeragent-strengen for å kunne vise sidene riktig, derfor anbefales det på det sterkeste at du ikke slår av dette, men heller tilpasser strengen. "
"<p>\n"
"<p> Som vist nedenfor i <b>fet skrift</b> er det bare litt informasjon om brukeragenten som sendes til nettsteder.\n"
"Enter the site or domain name where a fake browser identification should be used."
"<p>\n"
"<u>NOTE:</u> Wildcard syntax such as \\\"*,?\\\" is NOT allowed: instead, use the top level address of a site to make generic matches; for example, if you want all KDE sites to receive a fake browser identification, you would enter <code>kde.org</code> - the fake identity would then be sent to any KDE site that ends with <code>kde.org</code>.</p>"
"\n"
"</qt>"
msgstr ""
"<qt>\n"
"Skriv inn steds- eller domenenavn der nettleseren skal oppgi en annen identitet."
"<p>\n"
"<u>MERK:</u> Jokertegn som «*,?» er ikke tillatt. Skriv i stedet adressen på øverste nivå slik at alle underordnede steder blir funnet. For eksempel, hvis du vil at alle KDE-sider skal få en simulert nettleseridentitet, skriv <code>.kde.org</code>. Den falske identiteten blir sendt til alle KDE-sider som ender med <code>kde.org</code>.</p>"
msgstr "Sett opp funksjoner for forbedret nettlesing"
# DuckDuckGo(ose) er barneleken «Slå på ring»
#. +> trunk5
#: kcms/webshortcuts/main.cpp:49
#, kde-format
msgid ""
"<h1>Enhanced Browsing</h1>"
" In this module you can configure some enhanced browsing features of KDE. "
"<h2>Web Shortcuts</h2>"
"Web Shortcuts are a quick way of using Web search engines. For example, type \"duckduckgo:frobozz\" or \"dd:frobozz\" and your web browser will do a search on DuckDuckGo for \"frobozz\". Even easier: just press Alt+F2 (if you have not changed this keyboard shortcut) and enter the shortcut in the Run Command dialog."
msgstr ""
"<h1>Forbedret nettlesing</h1>"
" I denne modulen kan du sette opp noen forbedrede nettleserfunksjoner for KDE. "
"<h2>Nettsnarveier</h2>"
" Nettsnarveier er en rask måte å bruke nettsøkemotorer. Skriv for eksempel «duckduckgo:dings» eller «dd:dings», så søker nettleseren på DuckDuckGo etter «dings». Enda lettere er det å trykke Alt+F2 (hvis du ikke har endret denne tastesnarveien) og oppgi søkesnarveien i dialogvinduet «Kjør kommando»."
#. +> trunk5
#: kioexec/kioexecd.cpp:99
#, fuzzy, kde-format
#| msgid ""
#| "The file\n"
#| "%1\n"
#| "has been modified.\n"
#| "Do you want to upload the changes?"
msgid ""
"The file %1\n"
"has been modified. Do you want to upload the changes?"
msgid "Treat URLs as local files and delete them afterwards"
msgstr "Behandle nettadresser som lokale filer og slett dem etter bruk"
#. +> trunk5
#: kioexec/main.cpp:293
#, kde-format
msgid "Suggested file name for the downloaded file"
msgstr "Forslag til navn på den nedlastede fila"
#. +> trunk5
#: kioexec/main.cpp:294
#, kde-format
msgid "Command to execute"
msgstr "Kommando som skal kjøres"
#. +> trunk5
#: kioexec/main.cpp:295
#, kde-format
msgid "URL(s) or local file(s) used for 'command'"
msgstr "Nettadresser eller lokale filer som skal brukes for «kommando»"
#. +> trunk5
#: kpac/discovery.cpp:112
#, kde-format
msgid "Could not find a usable proxy configuration script"
msgstr "Kunne ikke finne et brukbart skript for mellomtjeneroppsett"
#. +> trunk5
#: kpac/downloader.cpp:93
#, kde-format
msgid ""
"Could not download the proxy configuration script:\n"
"%1"
msgstr ""
"Klarte ikke laste ned skriptet for mellomtjeneroppsett:\n"
"%1"
#. +> trunk5
#: kpac/downloader.cpp:96
#, kde-format
msgid "Could not download the proxy configuration script"
msgstr "Klarte ikke laste ned skriptet for mellomtjeneroppsett"
#. +> trunk5
#: kpac/proxyscout.cpp:240
#, kde-format
msgid ""
"The proxy configuration script is invalid:\n"
"%1"
msgstr ""
"Skriptet for mellomtjeneroppsett er ugyldig:\n"
"%1"
#. +> trunk5
#: kpac/proxyscout.cpp:353
#, kde-format
msgid ""
"The proxy configuration script returned an error:\n"
"%1"
msgstr ""
"Skriptet for mellomtjeneroppsett returnerte en feil:\n"
"%1"
#. +> trunk5
#: kpac/script.cpp:688
#, kde-format
msgid "Could not find 'FindProxyForURL' or 'FindProxyForURLEx'"
msgstr "Klarte ikke å finne 'FindProxyForURL' eller 'FindProxyForURLEx'"
#. +> trunk5
#: kpac/script.cpp:706
#, fuzzy, kde-format
#| msgid "Got an invalid reply when calling %1"
msgid "Got an invalid reply when calling %1 -> %2"
msgstr "Fikk et ugyldig svar ved kall på %1"
#. +> trunk5
#: kpasswdserver/kpasswdserver.cpp:563
#, kde-format
msgid "Do you want to retry?"
msgstr "Vil du prøve på nytt?"
#. +> trunk5
#: kpasswdserver/kpasswdserver.cpp:568
#, kde-format
msgid "Retry Authentication"
msgstr "Prøv autentisering på nytt"
#. +> trunk5
#: kpasswdserver/kpasswdserver.cpp:572
#, kde-format
msgctxt "@action:button filter-continue"
msgid "Retry"
msgstr "Prøv igjen"
#. +> trunk5
#: kpasswdserver/kpasswdserver.cpp:859
#, kde-format
msgid "Authentication Dialog"
msgstr "Dialogvindu for autorisasjon"
#. +> trunk5
#: urifilters/ikws/ikwsopts.cpp:54
#, kde-format
msgctxt "@title:column Name label from web shortcuts column"
msgid "Name"
msgstr "Navn"
#. +> trunk5
#: urifilters/ikws/ikwsopts.cpp:56
#, kde-format
msgctxt "@title:column"
msgid "Shortcuts"
msgstr "Snarveier"
#. +> trunk5
#: urifilters/ikws/ikwsopts.cpp:58
#, kde-format
msgctxt "@title:column"
msgid "Preferred"
msgstr "Foretrukket"
#. +> trunk5
#: urifilters/ikws/ikwsopts.cpp:107
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid ""
"Check this box to select the highlighted web shortcut as preferred.<nl/>"
"Preferred web shortcuts are used in places where only a few select shortcuts can be shown at one time."
msgstr ""
"Sett kryss her for å sette den valgte snarveien som foretrukket.<nl/>"
"Foretrukne nettsnarveier brukes der bare noen få snarveier kan vises samtidig."
#. +> trunk5
#: urifilters/ikws/ikwsopts.cpp:201
#, kde-format
msgctxt "@item:inlistbox No default web shortcut"
msgid "None"
msgstr "Ingen"
#. +> trunk5
#: urifilters/ikws/ikwsopts.cpp:264
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<para>In this module you can configure the web shortcuts feature. Web shortcuts allow you to quickly search or lookup words on the Internet. For example, to search for information about the KDE project using the Google engine, you simply type <emphasis>gg:KDE</emphasis> or <emphasis>google:KDE</emphasis>.</para>"
"<para>If you select a default search engine, then you can search for normal words or phrases by simply typing them into the input widget of applications that have built-in support for such a feature, e.g Konqueror.</para>"
msgstr ""
"<para>I denne modulen kan du stille inn nettsnarveier. Med nettsnarveier kan du slå opp eller lete etter ord på Internett på en rask måte. For eksempel kan du søke etter informasjon om KDE-prosjektet med søkemotoren Google ved bare å taste <emphasis>gg:KDE</emphasis> eller <emphasis>google:KDE</emphasis>. </para>"
"<para> Hvis du velger en standard søkemotor, så kan du søke etter vanlige ord eller uttrykk i denne søkemotoren ved å taste dem inn i programmer som har støtte for dette, slik som Konqueror.</para>"
"<p>Web shortcuts allow you to quickly access or search for information located online or on your hard drive. </p>"
"<p>KDE comes with many predefined Web shortcuts. One such Web shortcut is the Google (TM) search shortcut. To use it, you simply type the keyword 'gg' followed by the keyword delimiter and the search term, e.g. <span style=\" font-weight:600;\">gg:KDE</span>.</p>"
"</body></html>"
msgstr ""
"<html><head/><body>"
"<p>Slå av eller på nettsnarveier.</p>"
"<p>Med nettsnarveier kan du raskt få tilgang til eller søke etter informasjon på nettverket eller lokal harddisk.</p>"
"<p>KDE leveres med mange forhåndsdefinerte nettsnarveier. En slik snarvei er søkesnarveien for Google (TM). For å bruke den skriver du ganske enkelt nøkkelordet 'gg' fulgt av skilletegnet for nøkkelord og søkebegrepet, for eksempel <span style=\" font-weight:600;\">gg:KDE</span>.</p>"
"Select the search engine to use for input boxes that provide automatic lookup services when you type in normal words and phrases instead of a URL. To disable this feature select <b>None</b> from the list.\n"
"</qt>"
msgstr ""
"<qt>\n"
"Velg søkemotor som skal brukes for tekstfelter som gir automatisk oppslag når du taster inn vanlig tekst i stedet for en URL. Velg <b>Ingen</b> fra lista for å slå av denne effekten.\n"
"<p>This allows applications to automatically convert the typed word or phrase to web shortcut queries when they cannot be filtered into a proper URL. </p>"
"<p>To disable this functionality select <span style=\" font-weight:600;\">None</span> from the list. </p>"
"</body></html>"
msgstr ""
"<html><head/><body>"
"<p>Velg en standard nettsnarvei.</p>"
"<p>Dette lar programmer konvertere ord eller uttrykk til nettsnarveisøk der det ikke kan lages en ordinær nettadresse (URL).</p>"
"<p>For å slå av denne funksjonen, velg <span style=\" font-weight:600;\">Ingen</span> fra lista.</p>"
"Enter the URI that is used to perform a search on the search engine here.<br/>"
"The whole text to be searched for can be specified as \\{@} or \\{0}.<br/>"
"\n"
"Recommended is \\{@}, since it removes all query variables (name=value) from the resulting string, whereas \\{0} will be substituted with the unmodified query string.<br/>"
"You can use \\{1} ... \\{n} to specify certain words from the query and \\{name} to specify a value given by 'name=value' in the user query.<br/>"
"In addition it is possible to specify multiple references (names, numbers and strings) at once (\\{name1,name2,...,\"string\"}).<br/>"
"The first matching value (from the left) will be used as the substitution value for the resulting URI.<br/>"
"A quoted string can be used as the default value if nothing matches from the left of the reference list.\n"
"</qt>"
msgstr ""
"<qt>\n"
"Skriv inn den URI-en som skal brukes til å gjøre et søk i søkemotoren her.<br/>"
"\n"
"Hele teksten det skal søkes etter kan oppgis som \\{@} eller \\{0}.<br/>"
"\n"
"\\{@} er anbefalt, siden da fjernes alle spørrevariabler (navn=verdi) fra resultatstrengen, mens \\{0} blir erstattet med den uforandrede søkestrengen.<br/>"
"Du kan bruke \\{1} … \\{n} til å oppgi bestemte ord fra spørringen og \\{navn} til å oppgi en verdi gitt ved «navn=verdi» i brukerspørringen.<br/>"
"Dessuten er det mulig å oppgi flere referanser (navn, tall og strenger) samtidig (\\{navn1,navn2,..\"streng\"}).<br/>"
"Den første verdien (fra venstre) som passer vil bli brukt som erstatningsverdi i den URI-en som blir resultatet.<br/>"
"En streng i hermetegn kan brukes som standardverdi dersom ingenting passer fra venstre side i referanselista.\n"
"The shortcuts entered here can be used as a pseudo-URI scheme in KDE. For example, the shortcut <b>av</b> can be used as in <b>av</b>:<b>my search</b>\n"
"</qt>"
msgstr ""
"<qt>\n"
"Snarveier oppgitt her kan brukes som en pseudo-URI-valg i KDE. For eksempel kan snarveien<b>av</b> brukes som i <b>av</b>:<b>mitt søk</b>.\n"
msgid "<qt>Select the program that should be used to open <b>%1</b>. If the program is not listed, enter the name or click the browse button.</qt>"
msgstr "<qt>Velg programmet som skal brukes for å åpne <b>%1</b>. Dersom programmet ikke er i lista, skriv navnet eller trykk på «Bla gjennom»-knappen.</qt>"
#. +> trunk5
#: widgets/kopenwithdialog.cpp:565
#, kde-format
msgid "Choose the name of the program with which to open the selected files."
msgstr "Velg hvilket program du vil åpne de valgte filene med."
#. +> trunk5
#: widgets/kopenwithdialog.cpp:581
#, kde-format
msgid ""
"<qt>Select the program you want to use to open the file<br/>"
"%1</qt>"
msgstr ""
#. +> trunk5
#: widgets/kopenwithdialog.cpp:583
#, kde-format
msgid "<qt>Select the program you want to use to open the file.</qt>"
msgid_plural "<qt>Select the program you want to use to open the %1 files.</qt>"
msgid "<qt>Select the program for the file type: <b>%1</b>. If the program is not listed, enter the name or click the browse button.</qt>"
msgstr "<qt>Velg programmet du vil legge til for filtypen <b>%1</b>. Dersom programmet ikke er i lista, skriv navnet eller trykk på «Bla gjennom»-knappen.</qt>"
#. +> trunk5
#: widgets/kopenwithdialog.cpp:617
#, kde-format
msgid "<qt>Select a program. If the program is not listed, enter the name or click the browse button.</qt>"
msgstr "<qt>Velg et program. Dersom programmet ikke er i lista, skriv navnet eller trykk på «Bla gjennom»-knappen.</qt>"
#. +> trunk5
#: widgets/kopenwithdialog.cpp:657
#, kde-format
msgid ""
"Type to filter the applications below, or specify the name of a command.\n"
"Press down arrow to navigate the results."
msgstr ""
#. +> trunk5
#: widgets/kopenwithdialog.cpp:680
#, kde-format
msgid ""
"Following the command, you can have several place holders which will be replaced with the actual values when the actual program is run:\n"
"%f - a single file name\n"
"%F - a list of files; use for applications that can open several local files at once\n"
"%u - a single URL\n"
"%U - a list of URLs\n"
"%d - the directory of the file to open\n"
"%D - a list of directories\n"
"%i - the icon\n"
"%m - the mini-icon\n"
"%c - the comment"
msgstr ""
"Etter kommandoen kan du ha flere aliaser som blir erstattet med aktuelle verdier når selve programmet kjøres.\n"
"%f – et enkelt filnavn\n"
"%F – en liste over filer, brukes for programmer som kan åpne flere lokale filer samtidig\n"
"%u – en enkelt URL\n"
"%U – en liste over URL-er\n"
"%d – mappa til fila som skal åpnes\n"
"%D – en liste over mapper\n"
"%i – ikonet\n"
"%m – mini-ikonet\n"
"%c – kommentaren"
#. +> trunk5
#: widgets/kopenwithdialog.cpp:722
#, fuzzy, kde-format
#| msgctxt "@label:checkbox"
#| msgid "Remember action for files of this type"
msgid ""
"&Remember application association for all files of type\n"
"\"%1\" (%2)"
msgstr "Husk handling for filer av denne typen"
#. +> trunk5
#: widgets/kopenwithdialog.cpp:731
#, fuzzy, kde-format
#| msgid "&Terminal options:"
msgid "Terminal options"
msgstr "&Terminalvalg:"
#. +> trunk5
#: widgets/kopenwithdialog.cpp:736
#, kde-format
msgid "Run in &terminal"
msgstr "Kjør i &terminal"
#. +> trunk5
#: widgets/kopenwithdialog.cpp:754
#, kde-format
msgid "&Do not close when command exits"
msgstr "&Ikke lukk når programmet avslutter"
#. +> trunk5
#: widgets/kopenwithdialog.cpp:943
#, kde-format
msgid "Could not extract executable name from '%1', please type a valid program name."
msgstr "Kan ikke trekke ut programnavn fra «%1», oppgi et gyldig programnavn."
#. +> trunk5
#: widgets/kopenwithdialog.cpp:993
#, kde-format
msgid "'%1' not found, please type a valid program name."
msgstr "Fan ikke «%1», oppgi et gyldig programnavn."
msgid "Check this option if the application you want to run is a text mode application or if you want the information that is provided by the terminal emulator window."
msgstr "Kryss av her hvis programmet du skal kjøre er et tekstbasert program eller om du vil ha informasjonen du får i et terminalvindu."
msgid "Check this option if the text mode application offers relevant information on exit. Keeping the terminal emulator open allows you to retrieve this information."
msgstr "Kryss av her hvis det står igjen relevante opplysninger i terminalvinduet når programmet er avsluttet. Du kan få tak i denne informasjonen hvis terminalvinduet holdes åpent."
msgid "Check this option if you want to run this application with a different user id. Every process has a different user id associated with it. This id code determines file access and other permissions. The password of the user is required to use this option."
msgstr "Kryss av her om du vil kjøre dette programmet med et annet bruker-nummer. Hver prosess har et tilordnet brukernummer. Dette nummeret bestemmer filtilgang og andre tillatelser. Du trenger vedkommende brukers passord for å kunne bruke dette valget."
msgid "Check this option if you want to make clear that your application has started. This visual feedback may appear as a busy cursor or in the taskbar."
msgstr "Kryss av her hvis du vil gjøre det tydelig at programmet har startet. Denne synlige meldinga kan være et eget symbol for musepekeren eller i oppgavelinja."
msgid "Type the name you want to give to this application here. This application will appear under this name in the applications menu and in the panel."
msgstr "Skriv navnet til dette programmet her. Dette programmet vil framstå med dette navnet i programmenyen og i panelet."
"<p>This list should show the types of file that your application can handle. This list is organized by <u>mimetypes</u>.</p>"
"\n"
"<p>MIME, Multipurpose Internet (e)Mail Extension, is a standard protocol for identifying the type of data based on filename extensions and correspondent <u>mimetypes</u>. Example: the \"bmp\" part that comes after the dot in flower.bmp indicates that it is a specific kind of image, <u>image/x-bmp</u>. To know which application should open each type of file, the system should be informed about the abilities of each application to handle these extensions and mimetypes.</p>"
"\n"
"<p>If you want to associate this application with one or more mimetypes that are not in this list, click on the button <b>Add</b> below. If there are one or more filetypes that this application cannot handle, you may want to remove them from the list clicking on the button <b>Remove</b> below.</p>"
"</qt>"
msgstr ""
"<qt> "
"<p> Denne lista bør vise filtypene som programmet ditt kan håndtere.Denne lista ordnes etter <u>mimetyper</u>.</p>"
"\n"
"<p> MIME, Multipurpose Internet (e)Mail Extension, er en standard protokoll for å fastslå datatypen basert på fil-etternavnet og tilhørende <u>mimetyper</u>. Eksempel: «bmp» etter punktumet i blomst.bmp viser at dette er et spesielt type bilde, <u>image/x-bmp</u>. For å kunne vite hvilket program som skal åpne hver filtype, må systemet få beskjed om hva hvert enkelt program kan håndtere av fil-etternavn og mimetyper.</p>"
"\n"
"<p> Hvis du vil tilordne en eller flere mimetyper som ikke er i lista til programmet, så trykk på knappen <b>Legg til</b> nedenfor. Hvis det er en eller flere filtypersom dette programmet ikke kan håndtere, så kan du fjerne dem ved å trykke på <b>Fjern</b>-knappen nedenfor.</p>"
msgid "If you want to remove a type of file (mimetype) that your application cannot handle, select the mimetype in the list above and click on this button."
msgstr "Om du vil fjerne en type fil (mimetype) som programmet ikke håndterer, velg en av mimetypene i lista over, og trykk denne knappen."
msgid "This file is a link and does not have permissions."
msgid_plural "All files are links and do not have permissions."
msgstr[0] " Denne fila er en lenke og har ikke rettigheter."
msgstr[1] "Alle filene er lenker og har ikke rettigheter."
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:1787
#, kde-format
msgid "Only the owner can change permissions."
msgstr "Bare eieren kan endre rettigheter."
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:1791
#, kde-format
msgid "O&wner:"
msgstr "E&ier:"
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:1798
#, kde-format
msgid "Specifies the actions that the owner is allowed to do."
msgstr "Oppgir handlinger som eieren har lov til å utføre."
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:1800
#, kde-format
msgid "Gro&up:"
msgstr "Gr&uppe:"
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:1807
#, kde-format
msgid "Specifies the actions that the members of the group are allowed to do."
msgstr "Oppgir handlinger som medlemmer av gruppa har lov til å utføre."
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:1809
#, kde-format
msgid "O&thers:"
msgstr "An&dre:"
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:1816
#, kde-format
msgid "Specifies the actions that all users, who are neither owner nor in the group, are allowed to do."
msgstr "Oppgir handlinger som alle brukere, som hverken er eier eller medlemmer av gruppa, har lov til å utføre."
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:1821
#, kde-format
msgid "Only own&er can rename and delete folder content"
msgstr "Bare &eier kan endre navn på, eller slette, innhold i mappa"
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:1822
#, kde-format
msgid "Is &executable"
msgstr "Kan &kjøres"
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:1826
#, kde-format
msgid "Enable this option to allow only the folder's owner to delete or rename the contained files and folders. Other users can only add new files, which requires the 'Modify Content' permission."
msgstr "Slå på dette for at bare den som eier mappa kan endre navn på eller slette filer og mapper i denne mappa. Andre brukere kan bare legge til filer, hvis de har tillatelse til å «endre innhold»."
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:1830
#, kde-format
msgid "Enable this option to mark the file as executable. This only makes sense for programs and scripts. It is required when you want to execute them."
msgstr "Slå på dette for å markere fila som kjørbar. Dette har bare mening for programmer og skript, og er påkrevet når du vil kjøre dem."
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:1837
#, kde-format
msgid "A&dvanced Permissions"
msgstr "A&vanserte rettigheter"
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:1846
#, kde-format
msgid "Ownership"
msgstr "Eierskap"
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:1853
#, kde-format
msgid "User:"
msgstr "Bruker:"
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:1896
#, kde-format
msgid "Group:"
msgstr "Gruppe:"
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:1933
#, kde-format
msgid "Apply changes to all subfolders and their contents"
msgstr "Bruk endringene på alle undermapper og innholdet i dem"
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:1975
#, kde-format
msgid "Advanced Permissions"
msgstr "Avanserte rettigheter"
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:1992
#, kde-format
msgid "Class"
msgstr "Klasse"
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:1999
#, kde-format
msgid ""
"Show\n"
"Entries"
msgstr ""
"Vis\n"
"oppføringer"
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2000
#, kde-format
msgid "This flag allows viewing the content of the folder."
msgstr "Dette flagget gir tillatelse til å se på innholdet i mappa."
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2002
#, kde-format
msgid "Read"
msgstr "Lese"
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2003
#, kde-format
msgid "The Read flag allows viewing the content of the file."
msgstr "Lese-flagget gir tillatelse til å se innholdet i fila."
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2009
#, kde-format
msgid ""
"Write\n"
"Entries"
msgstr ""
"Skriv\n"
"oppføringer"
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2010
#, kde-format
msgid "This flag allows adding, renaming and deleting of files. Note that deleting and renaming can be limited using the Sticky flag."
msgstr "Dette flagget gir tillatelse til å legge til, slette og endre navn på filer. Merk at sletting og navneendring kan begrenses med «Klister»-flagget."
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2013
#, kde-format
msgid "Write"
msgstr "Skriv"
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2014
#, kde-format
msgid "The Write flag allows modifying the content of the file."
msgstr "Skriv-flagget gir tillatelse til å endre innholdet i fila."
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2020
#, kde-format
msgctxt "Enter folder"
msgid "Enter"
msgstr "Gå inn i"
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2021
#, kde-format
msgid "Enable this flag to allow entering the folder."
msgstr "Slå på dette flagget for å gi tillatelse til å gå inn i mappa."
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2023
#, kde-format
msgid "Exec"
msgstr "Kjørbar"
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2024
#, kde-format
msgid "Enable this flag to allow executing the file as a program."
msgstr "Slå på dette flagget for å gi tillatelse til å kjøre fila som et program."
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2032
#, kde-format
msgid "Special"
msgstr "Spesielt"
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2036
#, kde-format
msgid "Special flag. Valid for the whole folder, the exact meaning of the flag can be seen in the right hand column."
msgstr "Spesielt flagg. Gyldig for hele mappa, den nøyaktige betydningen av flagget kan ses i kolonnen til høyre."
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2039
#, kde-format
msgid "Special flag. The exact meaning of the flag can be seen in the right hand column."
msgstr "Spesielt flagg. Den nøyaktige betydningen av flagget kan ses i kolonnen til høyre."
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2043
#, kde-format
msgid "User"
msgstr "Bruker"
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2047
#, kde-format
msgid "Group"
msgstr "Gruppe"
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2057
#, kde-format
msgid "If this flag is set, the owner of this folder will be the owner of all new files."
msgstr "Hvis dette flagget er satt, vil den som eier mappa bli eier for alle nye filer."
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2060
#, kde-format
msgid "If this file is an executable and the flag is set, it will be executed with the permissions of the owner."
msgstr "Hvis fila er kjørbar og flagget er satt, så blir fila kjørt med samme tillatelser som eieren."
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2065
#, kde-format
msgid "If this flag is set, the group of this folder will be set for all new files."
msgstr "Hvis dette flagget er satt, så vil alle nye filer i katalogen få samme gruppe som katalogen."
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2068
#, kde-format
msgid "If this file is an executable and the flag is set, it will be executed with the permissions of the group."
msgstr "Hvis denne fila er kjørbar og flagget er satt, så blir den kjørt med samme tillatelser som gruppa."
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2073
#, kde-format
msgid "If the Sticky flag is set on a folder, only the owner and root can delete or rename files. Otherwise everybody with write permissions can do this."
msgstr "Hvis Klister-flagget er satt på en katalog, så kan bare eier og «root» slette filer eller gi dem nye navn. Ellers kan alle som har skrivetilgang gjøre dette."
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2077
#, kde-format
msgid "The Sticky flag on a file is ignored on Linux, but may be used on some systems"
msgstr "Klister-flagg på en fil blir ikke brukt i Linux, men kan være i bruk på noen systemer"
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2142
#, kde-format
msgid "Set UID"
msgstr "Sett UID"
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2146
#, kde-format
msgid "Set GID"
msgstr "Sett GID"
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2150
#, kde-format
msgctxt "File permission"
msgid "Sticky"
msgstr "Fast"
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2270
#, kde-format
msgid "Link"
msgstr "Lenke"
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2289
#, kde-format
msgid "Varying (No Change)"
msgstr "Varierende (Ingen endring)"
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2402
#, kde-format
msgid "This file uses advanced permissions"
msgid_plural "These files use advanced permissions."
msgstr[0] "Denne fila bruker avanserte tillatelser"
msgstr[1] "Disse filene bruker avanserte tillatelser."
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2423
#, kde-format
msgid "This folder uses advanced permissions."
msgid_plural "These folders use advanced permissions."
msgstr[0] "Denne mappa bruker avanserte tillatelser."
msgstr[1] "Disse mappene bruker avanserte tillatelser."
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2438
#, kde-format
msgid "These files use advanced permissions."
msgstr "Disse filene bruker avanserte tillatelser."
msgid "<p>The entries are accessible through the submenu <b>Commands</b> in the <b>Tools</b> menu. For faster access it is possible to assign <b>shortcuts</b> in the shortcut configuration page after applying the changes.</p>"
msgstr "<p>Oppføringene er tilgjengelige via undermenyen <b>Kommandoer</b> i menyen <b>Verktøy</b>. De kan nås raskere ved å tilordne <b>snarveier</b> på oppsettssiden for snarveier etter at endringene er tatt i bruk.</p>"
"<p>Automatically start a new line of text when the current line exceeds the length specified by the <b>Wrap words at:</b> option.</p>"
"<p>This option does not wrap existing lines of text - use the <b>Apply Static Word Wrap</b> option in the <b>Tools</b> menu for that purpose.</p>"
"<p>If you want lines to be <i>visually wrapped</i> instead, according to the width of the view, enable <b>Dynamic Word Wrap</b> in the <b>Appearance</b> config page.</p>"
msgstr ""
"<p>Start automatisk en ny tekstlinje når linja blir lengre enn lengden som er valgt i <b>Bryt ord ved:</b>. </p>"
"<p>Dette alternativet påvirker ikke den teksten som er skrevet fra før. Med <b>Bruk statisk tekstbryting</b> i <b>Verktøy</b>-menyen kan du bryte eldre tekst. </p>"
"<p>Dersom du vil at linjene bare skal <i>brytes visuelt</i> i steden, kan du slå på <b>Fleksibel tekstbryting</b> på oppsettssiden <b>Utseende</b>.</p>"
"<p>This string allows to configure Kate's settings for the files selected by this mimetype using Kate variables. Almost any configuration option can be set, such as highlight, indent-mode, encoding, etc.</p>"
"<p>For a full list of known variables, see the manual.</p>"
msgstr ""
"<p>Med denne strengen kan du sette opp Kates innstillinger for filer som blir valgt av denne MIME-typen ved bruk av Kates variabler. Du kan sette de fleste innstillingsvalgene, slik som syntaksmerking, innrykksmodus, koding osv.</p>"
" "
"<p>Se håndboka for full oversikt over kjente variabler.</p>"
msgid "The wildcards mask allows to select files by filename. A typical mask uses an asterisk and the file extension, for example <code>*.txt; *.text</code>. The string is a semicolon-separated list of masks."
msgstr "Med jokertegn-maske kan det velges filer etter filnavn. Typisk bruk av jokertegn er en asterisk og filetternavnet, f.eks. <code>*.txt; *.text</code>. Strengen er en liste av mønstre delt opp med semikolon."
msgid "The mime type mask allows to select files by mimetype. The string is a semicolon-separated list of mimetypes, for example <code>text/plain; text/english</code>."
msgstr "Med MIME-typemønsteret kan det velges filer etter mimetype. Strengen er en liste MIME-typer adskilt med seimikolon, for eksempel <code>text/plain; text/english</code>."
msgid "This is a list of available indentation modes. The specified indentation mode will be used for all new documents. Be aware that it is also possible to set the indentation mode with document variables, modes or a .kateconfig file."
msgstr "Dette er en liste over tilgjengelige innrykksmodus. Den oppgitte innrykksmåten brukes på alle nye dokumenter. Det er også mulig å velge innrykksmodus med dokumentvariabler, modus eller en .kateconfig-fil."
msgid "The indentation width is the number of spaces which is used to indent a line. If the option <b>Insert spaces instead of tabulators</b> in the section <b>Editing</b> is disabled, a <b>Tab</b> character is inserted if the indentation is divisible by the tab width."
msgstr "Innrykksbredden er antall mellomrom som brukes til å rykke inn en linje. Hvis valget <b>Redigering</b> er slått av, så settes det inn et <b>Tab</b>-tegn hvis innrykksbredden kan deles med tabulatorbredden."
msgid "If this option is selected, the <b>Backspace</b> key decreases the indentation level if the cursor is located in the leading blank space of a line."
msgstr "Hvis du velger dette, vil <b>Rettetast</b> senke innykksnivået, hvis skrivemerket er plassert i blanktegn i starten av en linje."
"<p>Tab key action (if no selection exists) <a href=\"If you want <b>Tab</b> to align the current line in the current code block like in emacs, make <b>Tab</b> a shortcut to the action <b>Align</b>.\"><span>More ...</span></a></p>"
"<p>Tabulatortast-handling (hvis ingenting er merket) <a href=\"Hvis du vil at <b>Tab</b> skal rette inn gjeldende linje i gjeldende kodeblokk som i emacs,velg <b>Tab</b> som snarvei til handlingen <b>Juster</b>.\"><span>Mer …</span> </a></p>"
msgid "If this option is selected, the <b>Tab</b> key always inserts white space so that the next tab position is reached. If the option <b>Insert spaces instead of tabulators</b> in the section <b>Editing</b> is enabled, spaces are inserted; otherwise, a single tabulator is inserted."
msgstr "Hvis du velger dette, vil <b>Tabulatortasten</b> alltid sette inn blanktegn så neste tabulatorposisjon nås. Hvis valget <b>Sett inn mellomrom istedenfor tabulatorer</b> i avsnittet <b>Redigering</b> er slått på, brukes mellomrom, ellers brukes tabulator."
msgid "If this option is selected, the <b>Tab</b> key always indents the current line by the number of character positions specified in <b>Indentation width</b>."
msgstr "Hvis du velger dette, vil <b>Tabulatortasten</b> alltid rykke inn med antall tegn gitt i <b>Innrykksbredde</b>."
"If this option is selected, the <b>Tab</b> key either indents the current line or advances to the next tab position."
"<p> If the insertion point is at or before the first non-space character in the line, or if there is a selection, the current line is indented by the number of character positions specified in <b>Indentation width</b>."
"<p> If the insertion point is located after the first non-space character in the line and there is no selection, white space is inserted so that the next tab position is reached: if the option <b>Insert spaces instead of tabulators</b> in the section <b>Editing</b> is enabled, spaces are inserted; otherwise, a single tabulator is inserted."
msgstr ""
"Hvis du velger dette, vil <b>Tabulatortasten</b> verken rykke inn gjeldende linje eller gå til neste tabulatorposisjon."
"<p> Hvis stedet for å sette inn er på eller før den første ikke-mellomrom-tegnet, eller hvis det er et merket område, vil gjeldende linje bli rykket inn med antall tegn gitt i <b>Innrykksbredde</b>."
"<p>Hvis stedet for å sette inn er etter det første ikke-mellomrom-tegnet på linja og det ikke er et merket område, vil blanktegn bli satt inn fram til neste tabulatorposisjon. Hvis valget <b>Sett inn mellomrom i stedet for tabulatorer</b> i avsnittet <b>Redigering</b> er valgt, settes mellomrom inn, ellers settes tabulator inn."
msgid "When selected, pressing the home key will cause the cursor to skip whitespace and go to the start of a line's text. The same applies for the end key."
msgstr "Når dette alternativet er valgt, vil Home-tasten hoppe over mellomrom og gå til starten av teksten på linja. Det samme gjelder for End-tasten."
msgid "When selected, composed characters are removed with their diacritics instead of only removing the base character. This is useful for Indic locales."
"<p>Backing up on save will cause Kate to copy the disk file to '<prefix><filename><suffix>' before saving changes."
"<p>The suffix defaults to <strong>~</strong> and prefix is empty by default."
msgstr ""
"<p>Dersom du velger å ta reservekopi ved lagring, vil Kate kopiere fila til «<prefiks><filnavn><etternavn>» før endringene blir lagret. "
"<p>Standardetternavnet er <strong>~</strong> og standard prefiks er tomt."
msgid "This defines the standard encoding to use to open/save files, if not changed in the open/save dialog or by using a command line option."
msgstr "Dette definerer standard tegnkoding som brukes når filer åpnes/lagres, hvis det ikke er endret i åpne/lagre-dialogen eller med et valg på kommandolinja."
msgid "if neither the encoding chosen as standard above, nor the encoding specified in the open/save dialog, nor the encoding specified on command line match the content of the file, this detection will be run."
msgstr "Hvis filinnholdet ikke stemmer med hverken standardkodingen valgt over, eller kodingen oppgitt i åpne/lagre-dialogen, eller kodingen oppgitt på kommandolinja, så vil denne gjenkjenningen bli kjørt."
#| msgid "This defines the fallback encoding to try for opening files if neither the encoding chosen as standard above, nor the encoding specified in the open/save dialog, nor the encoding specified on command line match the content of the file. Before this is used, an attempt will be made to determine the encoding to use by looking for a byte order marker at start of file: if one is found, the right unicode encoding will be chosen; otherwise encoding detection will run, if both fail fallback encoding will be tried."
msgid "This defines the fallback encoding to try for opening files if neither the encoding chosen as standard above, nor the encoding specified in the open/save dialog, nor the encoding specified on command line match the content of the file. Before this is used, an attempt will be made to determine the encoding to use by looking for a byte order mark at start of file: if one is found, the right Unicode encoding will be chosen; otherwise encoding detection will run, if both fail the fallback encoding will be tried."
msgstr "Dette definerer reservekodingen som skal forsøkes for å åpne filer når hverken standardkodingen valgt over, eller kodingen oppgitt i åpne/lagre-dialogen, eller kodingen oppgitt på kommandolinja stemmer med innholdet i fila. Før dette brukes blir det gjort et forsøk på bestemme tegnkodingen som skal brukes ved å se etter en markør for byte-rekkefølge først i fila: hvis det finnes en, så blir den riktige unicode-kodingen valgt, ellers kjøres en kodingsgjenkjenning, hvis begge disse mislykkes forsøkes denne reservekodingen."
msgid "If this option is enabled the editor will autodetect the end of line type. The first found end of line type will be used for the whole file."
msgstr "Her kan du velge om skriveprogrammet automatisk skal oppdage linjeslutt-typen. Den første typen linjeslutt som blir funnet blir brukt i hele fila."
#| msgid "The byte order mark is a special sequence at the beginning of unicode encoded documents. It helps editors to open text documents with the correct unicode encoding. The byte order mark is not visible in the displayed document."
msgid "The byte order mark is a special sequence at the beginning of Unicode encoded documents. It helps editors to open text documents with the correct Unicode encoding. The byte order mark is not visible in the displayed document."
msgstr "Merket for byte-rekkefølge er en spesiell sekvens i begynnelsen av dokumenter i unicode-tegnkoding. Det gjør at redigeringsprogrammer kan åpne tekstdokumenter med riktig unicode-koding. Merket for byte-rekkefølget er ikke synlig i det viste dokumentet."
msgid "Depending on the choice, trailing spaces are removed when saving a document, either in the entire document or only of modified lines."
msgstr "Avhengig av valget blir mellomrom på slutten av linjer fjernet når et dokument lagres, enten i hele dokumentet eller bare på linjer som er endret."
msgid "On save, a line break is appended to the document if not already present. The line break is visible after reloading the file."
msgstr "Ved lagring blir et linjeskift lagt til slutten av dokumentet hvis det ikke alt er et linjeskift der. Linjeskiftet blir synlig når fila er lastet inn igjen."
"<p>Enables the start of dynamically wrapped lines to be aligned vertically to the indentation level of the first line. This can help to make code and markup more readable.</p>"
"<p>Additionally, this allows you to set a maximum width of the screen, as a percentage, after which dynamically wrapped lines will no longer be vertically aligned. For example, at 50%, lines whose indentation levels are deeper than 50% of the width of the screen will not have vertical alignment applied to subsequent wrapped lines.</p>"
msgstr ""
"<p>Gjør at starten på fleksibelt brutte linjer blir stilt like under innrykket til den første linja. På denne måten kan det være lettere å lese kode og oppmerking.</p>"
" "
"<p>I tillegg kan du velge hvor langt ut på skjermen denne justeringa skal brukes. Dersom du f.eks. velger 50 %, vil linjer som er rykket inn mer enn 50 % ikke få innrykk på de brutte linjene.</p>"
"The file %1 could not be loaded, as it was not possible to read from it.\n"
"\n"
"Check if you have read access to this file."
msgstr ""
"Klarte ikke å laste inn fila %1, siden det ikke var mulig å lese fra den.\n"
"\n"
"Se til at du har lesetilgang til fila."
#. +> trunk5
#: document/katedocument.cpp:2402
#, kde-format
msgid ""
"The file %1 was opened with %2 encoding but contained invalid characters.<br />"
"It is set to read-only mode, as saving might destroy its content.<br />"
"Either reopen the file with the correct encoding chosen or enable the read-write mode again in the tools menu to be able to edit it."
msgstr ""
"Fila %1 ble åpnet med %2-koding, men inneholdt ugyldige tegn. <br />"
"Den er satt skrivebeskyttet, siden lagring kan ødelegge innholdet i fila.<br />"
" Enten åpne fila med riktig koding valgt, eller slå av skrivebeskyttelse igjen i verktøy-menyen så fila kan redigeres."
#. +> trunk5
#: document/katedocument.cpp:2412
#, kde-format
msgid "The file %1 was opened with %2 encoding but contained invalid characters. It is set to read-only mode, as saving might destroy its content. Either reopen the file with the correct encoding chosen or enable the read-write mode again in the tools menu to be able to edit it."
msgstr "Fila %1 ble åpnet med %2-koding, men inneholdt ugyldige tegn. Den er satt skrivebeskyttet, siden lagring kan ødelegge innholdet i fila. Enten åpne fila med riktig koding valgt, eller slå av skrivebeskyttelse igjen i verktøy-menyen så fila kan redigeres."
#. +> trunk5
#: document/katedocument.cpp:2423
#, kde-format
msgid ""
"The file %1 was opened and contained lines longer than the configured Line Length Limit (%2 characters).<br />"
"The longest of those lines was %3 characters long<br/>"
"Those lines were wrapped and the document is set to read-only mode, as saving will modify its content."
msgstr ""
"Fila %1 ble åpnet og inneholdt linjer lenger enn innstilt linjelengde (mer enn %2 tegn).<br />"
" Den lengste av disse linjene var %3 tegn lang<br/>"
"De linjene ble brutt, og dokumentet er satt skrivebeskyttet, siden innholdet blir endret hvis det blir lagret."
#. +> trunk5
#: document/katedocument.cpp:2428
#, kde-format
msgid "Temporarily raise limit and reload file"
msgstr "Øk grensen midlertidig og last fila på nytt"
#. +> trunk5
#: document/katedocument.cpp:2431
#, kde-format
msgid "Close"
msgstr "Lukk"
#. +> trunk5
#: document/katedocument.cpp:2437
#, kde-format
msgid ""
"The file %1 was opened and contained lines longer than the configured Line Length Limit (%2 characters).<br/>"
"The longest of those lines was %3 characters long<br/>"
"Those lines were wrapped and the document is set to read-only mode, as saving will modify its content."
msgstr ""
"Fila %1 ble åpnet og inneholdt linjer lenger enn innstilt linjelengde (mer enn %2 tegn).<br />"
" Den lengste av de linjene var %3 tegn lang<br/>"
"De linjene ble brutt, og dokumentet er satt skrivebeskyttet, siden innholdet blir endret hvis det blir lagret."
#. +> trunk5
#: document/katedocument.cpp:2460
#, kde-format
msgid "Do you really want to save this unmodified file? You could overwrite changed data in the file on disk."
msgstr "Er du sikker på at du vil lagre denne uendrede fila? Det kan hende at du skriver over endringer som er gjort i fila på disken."
#| msgid "The selected encoding cannot encode every unicode character in this document. Do you really want to save it? There could be some data lost."
msgid "The selected encoding cannot encode every Unicode character in this document. Do you really want to save it? There could be some data lost."
msgstr "Klarte ikke lagre dokumentet, siden den valgte tegnkodinga ikke kan kode .alle de Unicode-tegnene som trengs. Er du sikker på at du vil lagre den? Noen data kan gå tapt."
#. +> trunk5
#: document/katedocument.cpp:2518
#, fuzzy, kde-format
#| msgid ""
#| "The document could not be saved, as it was not possible to write to %1.\n"
#| "\n"
#| "Check that you have write access to this file or that enough disk space is available."
msgid ""
"The document could not be saved, as it was not possible to write to %1.\n"
"Check that you have write access to this file or that enough disk space is available.\n"
"The original file may be lost or damaged. Don't quit the application until the file is successfully written."
msgstr ""
"Klarte ikke å lagre dokumentet, siden det ikke var mulig å skrive til %1.\n"
"\n"
"Se til at du har skrivetilgang til denne fila og at det er nok ledig plass på disken."
#. +> trunk5
#: document/katedocument.cpp:2649
#, kde-format
msgid "For file %1 no backup copy could be created before saving. If an error occurs while saving, you might lose the data of this file. A reason could be that the media you write to is full or the directory of the file is read-only for you."
msgstr "Det kunne ikke lages en sikkerhetskopi av fila %1 før den lagres. Hvis det oppstår en feil under lagring kunne du miste dataeme i denne fila. En grunn kan være at mediet du lagrer til er fullt. eller at du ikke har skriverettigheter til den mappa der fila ligger."
#. +> trunk5
#: document/katedocument.cpp:2652
#, kde-format
msgid "Failed to create backup copy."
msgstr "Klarte ikke å lage sikkerhetskopi."
#. +> trunk5
#: document/katedocument.cpp:2653
#, kde-format
msgid "Try to Save Nevertheless"
msgstr "Forsøk å lagre likevel"
#. +> trunk5
#: document/katedocument.cpp:2775
#, kde-format
msgid "Do you really want to continue to close this file? Data loss may occur."
msgstr "Er du sikker på at du vil fortsette med å lukke denne fila? Data kan gå tapt."
"The document could not be saved, as it was not possible to write to %1.\n"
"\n"
"Check that you have write access to this file or that enough disk space is available."
msgstr ""
"Klarte ikke å lagre dokumentet, siden det ikke var mulig å skrive til %1.\n"
"\n"
"Se til at du har skrivetilgang til denne fila og at det er nok ledig plass på disken."
#. +> trunk5
#: document/katedocument.cpp:4766
#, fuzzy, kde-format
#| msgid "Using deprecated modeline 'remove-trailing-space'. Please replace with 'remove-trailing-spaces modified;', see http://docs.kde.org/stable/en/applications/kate/config-variables.html#variable-remove-trailing-spaces"
msgid "Using deprecated modeline 'remove-trailing-space'. Please replace with 'remove-trailing-spaces modified;', see https://docs.kde.org/stable5/en/applications/katepart/config-variables.html#variable-remove-trailing-spaces"
msgstr "Moduslinja «remove-trailing-space» er i bruk, men frarådes. Den bør erstattes med «remove-trailing-spaces modified», se http://docs.kde.org/stable/en/applications/kate/config-variables.html#variable-remove-trailing-spaces"
#. +> trunk5
#: document/katedocument.cpp:4771
#, fuzzy, kde-format
#| msgid "Using deprecated modeline 'replace-trailing-space-save'. Please replace with 'remove-trailing-spaces all;', see http://docs.kde.org/stable/en/applications/kate/config-variables.html#variable-remove-trailing-spaces"
msgid "Using deprecated modeline 'replace-trailing-space-save'. Please replace with 'remove-trailing-spaces all;', see https://docs.kde.org/stable5/en/applications/katepart/config-variables.html#variable-remove-trailing-spaces"
msgstr "Moduslinja «replace-trailing-space-save» er i bruk, men frarådes Den bør erstattes med «remove-trailing-spaces all», se http://docs.kde.org/stable/en/applications/kate/config-variables.html#variable-remove-trailing-spaces"
#. +> trunk5
#: document/katedocument.cpp:5098
#, kde-format
msgid "The file '%1' was modified by another program."
msgstr "Fila «%1» ble endret på disk av et annet program."
#. +> trunk5
#: document/katedocument.cpp:5101
#, kde-format
msgid "The file '%1' was created by another program."
msgstr "Fila «%1» ble opprettet av et annet program."
#. +> trunk5
#: document/katedocument.cpp:5104
#, kde-format
msgid "The file '%1' was deleted by another program."
msgstr "Fila «%1» ble slettet på disk av et annet program."
#. +> trunk5
#: document/katedocument.cpp:5380
#, kde-format
msgid ""
"The document \"%1\" has been modified.\n"
"Do you want to save your changes or discard them?"
msgstr ""
"Dokumentet «%1» er blitt endret.\n"
"Vil du lagre endringene eller forkaste dem?"
#. +> trunk5
#: document/katedocument.cpp:5382
#, kde-format
msgid "Close Document"
msgstr "Lukk dokumentet"
#. +> trunk5
#: document/katedocument.cpp:5515
#, kde-format
msgid "The file <a href=\"%1\">%2</a> is still loading."
msgstr "Fila <a href=\"%1\">%2</a> blir fremdeles lastet inn."
"Select the MimeTypes you want for this file type.\n"
"Please note that this will automatically edit the associated file extensions as well."
msgstr ""
"Velg MIME-typene du vil bruke med denne filtypen.\n"
"Legg merke til at dette automatisk endrer tilhørende filetternavnene."
#. +> trunk5
#: mode/katemodeconfigpage.cpp:293
#, kde-format
msgid "Select Mime Types"
msgstr "Velg MIME-typer"
#. +> trunk5
#: mode/katemodeconfigpage.cpp:304
#, kde-format
msgid "Modes && Filetypes"
msgstr "Modus og filtyper"
#. +> trunk5
-#: mode/katemodemenulist.cpp:84
+#: mode/katemodemenulist.cpp:98
#, fuzzy, kde-format
#| msgid "Search..."
msgctxt "Placeholder in search bar"
msgid "Search..."
msgstr "Søk …"
#. +> trunk5
-#: mode/katemodemenulist.cpp:85
+#: mode/katemodemenulist.cpp:99
#, kde-format
msgctxt "ToolTip of the search bar of modes of syntax highlighting"
msgid "Search for syntax highlighting modes by language name or file extension (for example, C++ or .cpp)"
msgstr ""
#. +> trunk5
-#: mode/katemodemenulist.cpp:385
+#: mode/katemodemenulist.cpp:460
#, kde-format
msgctxt "A search yielded no results"
msgid "No items matching your search"
msgstr ""
#. +> trunk5
+#: mode/katemodemenulist.cpp:937
+#, fuzzy, kde-format
+#| msgid "Search Path"
+msgctxt "Title (in singular) of the best result in an item search. Please, that the translation doesn't have more than 34 characters, since the menu where it's displayed is small and fixed."
+msgid "Best Search Match"
+msgstr "Søke sti"
+
+#. +> trunk5
+#: mode/katemodemenulist.cpp:940
+#, fuzzy, kde-format
+#| msgid "Best matches"
+msgctxt "Title (in plural) of the best results in an item search. Please, that the translation doesn't have more than 34 characters, since the menu where it's displayed is small and fixed."
+msgid "Best Search Matches"
+msgstr "Beste treff"
+
+#. +> trunk5
#: printing/printconfigwidgets.cpp:49
#, kde-format
msgid "Te&xt Settings"
msgstr "Te&kstinnstillinger"
#. +> trunk5
#: printing/printconfigwidgets.cpp:53
#, kde-format
msgid "Print line &numbers"
msgstr "Skriv ut linje&numre"
#. +> trunk5
#: printing/printconfigwidgets.cpp:56
#, kde-format
msgid "Print &legend"
msgstr "Skriv ut &beskrivelse"
#. +> trunk5
#: printing/printconfigwidgets.cpp:65
#, kde-format
msgid "<p>If enabled, line numbers will be printed on the left side of the page(s).</p>"
msgstr "<p>Hvis valgt, vil linjenumre bli skrevet ut på venstre side av siden/sidene.</p>"
#. +> trunk5
#: printing/printconfigwidgets.cpp:67
#, kde-format
msgid "<p>Print a box displaying typographical conventions for the document type, as defined by the syntax highlighting being used.</p>"
msgstr "<p>Skriv ut en rute som viser typografiske konvensjoner for dokumenttypen, slik de er definert ved den syntaksmerkinga som er i bruk.</p>"
msgid "Select the color scheme to use for the print."
msgstr "Velg fargeskjema som skal brukes for utskrift."
#. +> trunk5
#: printing/printconfigwidgets.cpp:564
#, kde-format
msgid ""
"<p>If enabled, the background color of the editor will be used.</p>"
"<p>This may be useful if your color scheme is designed for a dark background.</p>"
msgstr ""
"<p>Hvis du velger dette blir skriveprogrammets bakgrunnsfarge brukt.</p>"
" "
"<p>Dette kan komme til nytte hvis fargeoppsettet ditt er laget for en mørk bakgrunn.</p>"
#. +> trunk5
#: printing/printconfigwidgets.cpp:567
#, kde-format
msgid "<p>If enabled, a box as defined in the properties below will be drawn around the contents of each page. The Header and Footer will be separated from the contents with a line as well.</p>"
msgstr "<p>Hvis du velger dette blir det tegnet en ramme rundt innholdet på hver side, med egenskaper som definert nedenfor. Topp- og bunntekst blir også atskilt fra teksten med en linje.</p>"
msgid "Use default color from the KDE color scheme"
msgstr "Bruk standardfarge fra KDEs fargeoppsett"
#. +> trunk5
#: schema/kateschemaconfig.cpp:59
#, kde-format
msgid "Use KDE Color Scheme"
msgstr "Bruk KDE sitt fargeskjema"
#. +> trunk5
#: schema/kateschemaconfig.cpp:86
#, kde-format
msgid "Editor Background Colors"
msgstr "Bakgrunnsfarger"
#. +> trunk5
#: schema/kateschemaconfig.cpp:88
#, kde-format
msgid "Text Area"
msgstr "Tekstområde"
#. +> trunk5
#: schema/kateschemaconfig.cpp:90
#, kde-format
msgid "<p>Sets the background color of the editing area.</p>"
msgstr "<p>Velg bakgrunnsfargen for skriveområdet.</p>"
#. +> trunk5
#: schema/kateschemaconfig.cpp:94
#, kde-format
msgid "Selected Text"
msgstr "Utvalgt tekst"
#. +> trunk5
#: schema/kateschemaconfig.cpp:96
#, kde-format
msgid ""
"<p>Sets the background color of the selection.</p>"
"<p>To set the text color for selected text, use the "<b>Configure Highlighting</b>" dialog.</p>"
msgstr ""
"<p>Velg bakgrunnsfargen på merket tekst. </p>"
"<p>Bruk "<b>Sett opp syntaksmerking</b>" til å oppgi bakgrunnsfarge for merket tekst.</p>"
#. +> trunk5
#: schema/kateschemaconfig.cpp:100
#, kde-format
msgid "Current Line"
msgstr "Gjeldende linje"
#. +> trunk5
#: schema/kateschemaconfig.cpp:102
#, kde-format
msgid "<p>Sets the background color of the currently active line, which means the line where your cursor is positioned.</p>"
msgstr "<p>Velg bakgrunnsfargen på linja der skrivemerket står.</p>"
#. +> trunk5
#: schema/kateschemaconfig.cpp:106
#, kde-format
msgid "Search Highlight"
msgstr "SøkFramHev"
#. +> trunk5
#: schema/kateschemaconfig.cpp:108
#, kde-format
msgid "<p>Sets the background color of search results.</p>"
msgstr "<p>Velg bakgrunnsfargen for søkeresultater.</p>"
#. +> trunk5
#: schema/kateschemaconfig.cpp:112
#, kde-format
msgid "Replace Highlight"
msgstr "Framhev erstatning"
#. +> trunk5
#: schema/kateschemaconfig.cpp:114
#, kde-format
msgid "<p>Sets the background color of replaced text.</p>"
msgstr "<p>Velger bakgrunnsfargen for erstattet tekst.</p>"
#. +> trunk5
#: schema/kateschemaconfig.cpp:121
#, kde-format
msgid "Icon Border"
msgstr "Ikonkant"
#. +> trunk5
#: schema/kateschemaconfig.cpp:123
#, kde-format
msgid "Background Area"
msgstr "Bakgrunnsområde"
#. +> trunk5
#: schema/kateschemaconfig.cpp:125
#, kde-format
msgid "<p>Sets the background color of the icon border.</p>"
msgstr "<p>Velg bakgrunnsfargen for ikonkanten.</p>"
#. +> trunk5
#: schema/kateschemaconfig.cpp:129
#, kde-format
msgid "Line Numbers"
msgstr "Linjenumre"
#. +> trunk5
#: schema/kateschemaconfig.cpp:131
#, kde-format
msgid "<p>This color will be used to draw the line numbers (if enabled).</p>"
msgstr "<p>Denne fargen blir brukt til å vise linjenummer (hvis det er slått på).</p>"
#. +> trunk5
#: schema/kateschemaconfig.cpp:135
#, kde-format
msgid "Current Line Number"
msgstr "Gjeldende linjenummer"
#. +> trunk5
#: schema/kateschemaconfig.cpp:137
#, kde-format
msgid "<p>This color will be used to draw the number of the current line (if enabled).</p>"
msgstr "<p>Denne fargen blir brukt til å vise linjenummer (hvis det er slått på).</p>"
#. +> trunk5
#: schema/kateschemaconfig.cpp:141
#, kde-format
msgid "Separator"
msgstr "Skillelinje"
#. +> trunk5
#: schema/kateschemaconfig.cpp:143
#, kde-format
msgid "<p>This color will be used to draw the line between line numbers and the icon borders, if both are enabled.</p>"
msgstr "<p>Denne fargen blir brukt til å tegne linja mellom numrene og ikonkantene, hvis begge er slått på.</p>"
#. +> trunk5
#: schema/kateschemaconfig.cpp:147
#, kde-format
msgid "Word Wrap Marker"
msgstr "Merke for ordbryting"
#. +> trunk5
#: schema/kateschemaconfig.cpp:149
#, kde-format
msgid ""
"<p>Sets the color of Word Wrap-related markers:</p>"
"<dl>"
"<dt>Static Word Wrap</dt>"
"<dd>A vertical line which shows the column where text is going to be wrapped</dd>"
"<dt>Dynamic Word Wrap</dt>"
"<dd>An arrow shown to the left of visually-wrapped lines</dd>"
"</dl>"
msgstr ""
"<p>Velg fargen på tekstbrytingsmerkene:</p>"
" "
"<dl>"
"<dt>Statisk tekstbryting</dt>"
" "
"<dd>En loddrett linje ved den kolonnen der teksten vil bli brutt.</dd>"
" "
"<dt>Fleksibel teksbryting</dt>"
" "
"<dd>En pil til venstre for de linjene som er brutt.</dd>"
"</dl>"
#. +> trunk5
#: schema/kateschemaconfig.cpp:153
#, kde-format
msgid "Code Folding"
msgstr "Kodebryting"
#. +> trunk5
#: schema/kateschemaconfig.cpp:155
#, kde-format
msgid "<p>Sets the color of the code folding bar.</p>"
msgstr "<p>Bestemmer fargen for kodebrytingslinja.</p>"
#. +> trunk5
#: schema/kateschemaconfig.cpp:159
#, kde-format
msgid "Modified Lines"
msgstr "Endrede linjer"
#. +> trunk5
#: schema/kateschemaconfig.cpp:161
#, kde-format
msgid "<p>Sets the color of the line modification marker for modified lines.</p>"
msgstr "<p>Bestemmer fargen på markøren som brukes till å vise linjer som er endret.</p>"
#. +> trunk5
#: schema/kateschemaconfig.cpp:165
#, kde-format
msgid "Saved Lines"
msgstr "Linjer som er lagret"
#. +> trunk5
#: schema/kateschemaconfig.cpp:167
#, kde-format
msgid "<p>Sets the color of the line modification marker for saved lines.</p>"
msgstr "<p>Bestemmer fargen på markøren som brukes till å vise linjer som er lagret.</p>"
#. +> trunk5
#: schema/kateschemaconfig.cpp:174
#, kde-format
msgid "Text Decorations"
msgstr "Tekstdekorasjoner"
#. +> trunk5
#: schema/kateschemaconfig.cpp:176
#, kde-format
msgid "Spelling Mistake Line"
msgstr "Linje for stavefeil"
#. +> trunk5
#: schema/kateschemaconfig.cpp:178
#, kde-format
msgid "<p>Sets the color of the line that is used to indicate spelling mistakes.</p>"
msgstr "<p>Bestemmer fargen på linja som brukes til å vise stavefeil.</p>"
#. +> trunk5
#: schema/kateschemaconfig.cpp:182
#, kde-format
msgid "Tab and Space Markers"
msgstr "Tabulator- og mellomromsmerker"
#. +> trunk5
#: schema/kateschemaconfig.cpp:184
#, kde-format
msgid "<p>Sets the color of the tabulator marks.</p>"
msgstr "<p>Velg fargen på tabulatormerkene.</p>"
#. +> trunk5
#: schema/kateschemaconfig.cpp:188
#, kde-format
msgid "Indentation Line"
msgstr "Innrykkslinje"
#. +> trunk5
#: schema/kateschemaconfig.cpp:190
#, kde-format
msgid "<p>Sets the color of the vertical indentation lines.</p>"
msgstr "<p>Bestemmer fargen på de loddrette innrykslinjene.</p>"
#. +> trunk5
#: schema/kateschemaconfig.cpp:194
#, kde-format
msgid "Bracket Highlight"
msgstr "Parentesmerking"
#. +> trunk5
#: schema/kateschemaconfig.cpp:196
#, kde-format
msgid "<p>Sets the bracket matching color. This means, if you place the cursor e.g. at a <b>(</b>, the matching <b>)</b> will be highlighted with this color.</p>"
msgstr "<p>Velg fargen på parentesmerkinga. Dersom du f.eks. plasserer skrivemerket på en <b>(</b>, blir <b>)</b> vist med denne fargen.</p>"
"<p><b>Note</b>: The marker color is displayed lightly because of transparency.</p>"
msgstr ""
"<p>Velg bakgrunnsfargen på merketype. </p>"
"<p><b>Merk</b>: Merkefargen blr vist lysere på grunn av gjennomsiktighet.</p>"
#. +> trunk5
#: schema/kateschemaconfig.cpp:226
#, kde-format
msgid "Text Templates & Snippets"
msgstr "Tekstmaler og biter"
#. +> trunk5
#: schema/kateschemaconfig.cpp:230
#, kde-format
msgid "Background"
msgstr "Bakgrunn"
#. +> trunk5
#: schema/kateschemaconfig.cpp:235
#, kde-format
msgid "Editable Placeholder"
msgstr "Redigerbar plassholder"
#. +> trunk5
#: schema/kateschemaconfig.cpp:240
#, kde-format
msgid "Focused Editable Placeholder"
msgstr "Fokusert redigerbar plassholder"
#. +> trunk5
#: schema/kateschemaconfig.cpp:245
#, kde-format
msgid "Not Editable Placeholder"
msgstr "Ikke redigerbar plassholder"
#. +> trunk5
#: schema/kateschemaconfig.cpp:469
#, kde-format
msgid ""
"<p>This list displays the default styles for the current schema and offers the means to edit them. The style name reflects the current style settings.</p>"
"<p>To edit the colors, click the colored squares, or select the color to edit from the popup menu.</p>"
"<p>You can unset the Background and Selected Background colors from the popup menu when appropriate.</p>"
msgstr ""
"<p>Denne lista viser standardstilene for gjeldende skjema, og viser virkemidler for å endre disse. Stilnavnene komme fra gjeldende innstillinger.</p>"
"<p>For å endre farger, pek på fargekartet, eller velg farger fra sprettoppmenyen.</p>"
"<p>Du kan skru av farger for Bakgrunn og Markert Bakgrunn fra sprettoppmenyen når det passer.</p>"
"<p>This list displays the contexts of the current syntax highlight mode and offers the means to edit them. The context name reflects the current style settings.</p>"
"<p>To edit using the keyboard, press <strong><SPACE></strong> and choose a property from the popup menu.</p>"
"<p>To edit the colors, click the colored squares, or select the color to edit from the popup menu.</p>"
"<p>You can unset the Background and Selected Background colors from the context menu when appropriate.</p>"
msgstr ""
"<p>Denne lista viser kontekstene for gjeldende syntaksmerkingsmodus, og tilbyr virkemidler for å endre disse. Navnene avhenger av gjeldende innstillinger. </p>"
"<p>For å endre ved bruk av tastaturet, tast<strong><mellomrom></strong> og velg en egenskap fra sprettoppmenyen. </p>"
"<p>For å endre farger, pek på fargekartet, eller velg farger fra sprettoppmenyen. </p>"
"<p>Du kan slå av fargene for Bakgrunn og Markert Bakgrunn fra sprettoppmenyen når det passer.</p>"
#. +> trunk5
#: schema/kateschemaconfig.cpp:681
#, kde-format
msgid "Loading all highlightings for schema"
msgstr "Laster all syntaksmerking for oppsettet"
#. +> trunk5
#: schema/kateschemaconfig.cpp:792
#, kde-format
msgid "Importing colors for single highlighting"
msgstr "Importerer farger for enkelt syntaksmerking"
"To save you some typing, you can also do this to achieve the same:<br>"
"<code>filter 'line.length > 0'</code>"
msgstr ""
"Gitt en JavaScript-funksjon som argument, kall funksjonen for lista over (valgte) linjer og slett dem der returverdien fra funksjonen er «false».<br>"
"<p>This word was considered to be an \"unknown word\" because it does not match any entry in the dictionary currently in use. It may also be a word in a foreign language.</p>"
"\n"
"<p>If the word is not misspelled, you may add it to the dictionary by clicking <b>Add to Dictionary</b>. If you do not want to add the unknown word to the dictionary, but you want to leave it unchanged, click <b>Ignore</b> or <b>Ignore All</b>.</p>"
"\n"
"<p>However, if the word is misspelled, you can try to find the correct replacement in the list below. If you cannot find a replacement there, you may type it in the text box below, and click <b>Replace</b> or <b>Replace All</b>.</p>"
"\n"
"</qt>"
msgstr ""
"<qt>"
"<p>Dette ordet er regnet som «ukjent» fordi det ikke finnes i den ordlista du bruker. Ordet kan være feilstavet eller skrevet på et annet språk.</p>"
" \n"
"<p>Dersom ordet ikke er feilstavet, kan du legge det til i ordlista ved å trykke på <b>Legg til i ordlista</b>. Dersom du ikke vil legge ordet til i ordlista, men la det stå urørt, trykker du på <b>Ignorer</b> eller <b>Ignorer alle</b>.</p>"
" \n"
"<p>Dersom ordet er feilstavet, kan du prøve å finne den rette skrivemåten i lista nedenfor. Dersom du ikke finner noe som passer, kan du skrive ordet i skrivefeltet under, og velge <b>Erstatt</b> eller <b>Erstatt alle</b>.</p>"
"<p>The unknown word was detected and considered unknown because it is not included in the dictionary.<br>"
"\n"
"Click here if you consider the unknown word not to be misspelled, and you want to avoid wrongly detecting it again in the future. If you want to let it remain as is, but not add it to the dictionary, then click <b>Ignore</b> or <b>Ignore All</b> instead.</p>"
"\n"
"</qt>"
msgstr ""
"<qt>\n"
"<p>Det ukjente ordet ble funnet og betraktet som ukjent fordi det ikke finnes i ordlista. <br/>"
"\n"
"Trykk her hvis du mener at det ukjente ordet er riktig stavet og du vil at stavekontrollen ikke skal reagere på det senere. Hvis du vil la det stå som det er, men ikke legge det til i ordlista, så trykk <b>Ignorer</b> eller <b>Ignorer alle</b> i stedet.</p>"
"<p>If the unknown word is misspelled, you should type the correction for your misspelled word here or select it from the list below.</p>"
"\n"
"<p>You can then click <b>Replace</b> if you want to correct only this occurrence of the word or <b>Replace All</b> if you want to correct all occurrences.</p>"
"\n"
"</qt>"
msgstr ""
"<qt>\n"
"<p>Hvis det ukjente ordet er feilstavet bør du skrive inn rettelsen for ordet her, eller velge det fra lista nedenfor.</p>"
"\n"
"<p>Så kan du trykke <b>Erstatt</b> hvis du vil erstatte bare denne forekomsten av ordet, eller <b>Erstatt alle</b> hvis du vil rette alle forekomster.</p>"
"<p>Click here to let this occurrence of the unknown word remain as is.</p>"
"\n"
"<p>This action is useful when the word is a name, an acronym, a foreign word or any other unknown word that you want to use but not add to the dictionary.</p>"
"\n"
"</qt>"
msgstr ""
"<qt>\n"
"<p>Trykk her for å la denne forekomsten av det ukjente ordet være som den er.</p>"
"\n"
"<p> Dette kan brukes når ordet er et navn, en forkortelse, et fremmedord eller hvilket som helst annet ord du vil bruke uten å legge det inn i ordlista.</p>"
"<p>Click here to let all occurrences of the unknown word remain as they are.</p>"
"\n"
"<p>This action is useful when the word is a name, an acronym, a foreign word or any other unknown word that you want to use but not add to the dictionary.</p>"
"\n"
"</qt>"
msgstr ""
"<qt>\n"
"<p>Trykk her for å la alle forekomster av det ukjente ordet være som de er.</p>"
"\n"
"<p> Dette kan brukes når ordet er et navn, en forkortelse, et fremmedord eller hvilket som helst annet ord du vil bruke uten å legge det inn i ordlista.</p>"
"<p>Indents the selected lines or the current line</p>"
msgstr ""
"<p>indent</p>"
" "
"<p>rykker inn markerte linjer eller gjeldende linje</p>"
#. +> trunk5
#: utils/katecmds.cpp:69
#, kde-format
msgid ""
"<p>unindent</p>"
"<p>Unindents the selected lines or current line.</p>"
msgstr ""
"<p>unindent</p>"
" "
"<p>Tar bort innrykk fra markerte linjer eller gjeldende linje.</p>"
#. +> trunk5
#: utils/katecmds.cpp:73
#, kde-format
msgid ""
"<p>cleanindent</p>"
"<p>Cleans up the indentation of the selected lines or current line according to the indentation settings in the document. </p>"
msgstr ""
"<p>cleanindent</p>"
" "
"<p>Rydder opp innrykket for de markerte linjene eller gjeldende linje i følge innrykksinnstillingene i dokumentet.</p>"
#. +> trunk5
#: utils/katecmds.cpp:77
#, kde-format
msgid ""
"<p>comment</p>"
"<p>Inserts comment markers to make the selection or selected lines or current line a comment according to the text format as defined by the syntax highlight definition for the document.</p>"
msgstr ""
"<p>comment</p>"
" "
"<p>Setter inn kommentarmerker som gjør de markerte linjene eller gjeldende linje til en kommentar, i følge definisjonen av syntaksmerking for dokumentet.</p>"
#. +> trunk5
#: utils/katecmds.cpp:81
#, kde-format
msgid ""
"<p>uncomment</p>"
"<p>Removes comment markers from the selection or selected lines or current line according to the text format as defined by the syntax highlight definition for the document.</p>"
msgstr ""
"<p>uncomment</p>"
" "
"<p>Fjerner kommentarmerker fra de markerte linjene eller gjeldende linje, i følge definisjonen av syntaksmerking for dokumentet.</p>"
#. +> trunk5
#: utils/katecmds.cpp:85
#, kde-format
msgid ""
"<p>goto <b>line number</b></p>"
"<p>This command navigates to the specified line number.</p>"
msgstr ""
"<p>goto <b>linjenummer</b></p>"
" "
"<p>Denne kommandoen navigerer til det oppgitte linjenummeret.</p>"
"s"
#. +> trunk5
#: utils/katecmds.cpp:89
#, kde-format
msgid ""
"<p>set-indent-pasted-text <b>enable</b></p>"
"<p>If enabled, indentation of text pasted from the clipboard is adjusted using the current indenter.</p>"
"<p>Possible true values: 1 on true<br/>"
"possible false values: 0 off false</p>"
msgstr ""
"<p>set-indent-pasted-text <b>enable</b></p>"
"<p>Hvis dette er på blir innrykk for tekst limt inn fra utklippstavla justert ved bruk av gjeldende innrykker.</p>"
"<p>Mulige på-verdier: 1 on true<br/>"
"mulige av-verdier: 0 off false</p>"
#. +> trunk5
#: utils/katecmds.cpp:95
#, kde-format
msgid "Deletes the current line."
msgstr "Sletter gjeldende linje."
#. +> trunk5
#: utils/katecmds.cpp:98
#, kde-format
msgid ""
"<p>set-tab-width <b>width</b></p>"
"<p>Sets the tab width to the number <b>width</b></p>"
msgstr ""
"<p>set-tab-width <b>bredde</b></p>"
"<p>Setter tabulatorbredden til tallet<b>bredde</b></p>"
#. +> trunk5
#: utils/katecmds.cpp:102
#, kde-format
msgid ""
"<p>set-replace-tab <b>enable</b></p>"
"<p>If enabled, tabs are replaced with spaces as you type.</p>"
"<p>Possible true values: 1 on true<br/>"
"possible false values: 0 off false</p>"
msgstr ""
"<p>set-replace-tab <b>av/på</b></p>"
" "
"<p>Hvis dette er på blir TAB-tegn erstattet med mellomrom mens du taster.</p>"
" "
"<p>Mulige på-verdier: 1 on true<br />"
"mulige av-verdier: 0 off false</p>"
#. +> trunk5
#: utils/katecmds.cpp:108
#, kde-format
msgid ""
"<p>set-show-tabs <b>enable</b></p>"
"<p>If enabled, TAB characters and trailing whitespace will be visualized by a small dot.</p>"
"<p>Possible true values: 1 on true<br/>"
"possible false values: 0 off false</p>"
msgstr ""
"<p>set-show-tabs <b> av/på</b></p>"
" "
"<p>Hvis dette er på blir TAB-tegn og mellomrom før linjeslutt vist med en liten prikk.</p>"
" "
"<p>Mulige på-verdier: 1 on true<br />"
"mulige av-verdier: 0 off false</p>"
#. +> trunk5
#: utils/katecmds.cpp:114
#, kde-format
msgid ""
"<p>set-remove-trailing-spaces <b>mode</b></p>"
"<p>Removes the trailing spaces in the document depending on the <b>mode</b>.</p>"
"<p>Possible values:"
"<ul>"
"<li><b>none</b>: never remove trailing spaces.</li>"
"<li><b>modified</b>: remove trailing spaces only of modified lines.</li>"
"<li><b>all</b>: remove trailing spaces in the entire document.</li>"
"</ul>"
"</p>"
msgstr ""
"<p>set-demove-trailing-spaces<b>modus</b></p>"
" "
"<p>Fjerner mellomrom i dokumentet avhengig av <b>modus</b>.</p>"
" "
"<p>Mulige verdier: "
"<ul> "
"<li><b>none</b> fjern aldri mellomrom før linjeslutt.</li>"
" "
"<li><b>modified</b> fjern mellomrom før linjeslutt bare på linjer som er endret.</li>"
" "
"<li><b>all</b> fjern mellomrom før linjeslutt i hele dokumentet.</li>"
" </ul>"
" </p>"
#. +> trunk5
#: utils/katecmds.cpp:124
#, kde-format
msgid ""
"<p>set-indent-width <b>width</b></p>"
"<p>Sets the indentation width to the number <b>width</b>. Used only if you are indenting with spaces.</p>"
msgstr ""
"<p>set-indent-width <b>bredde</b></p>"
" "
"<p>Setter innrykksbredden til tallet <b>bredde</b>. Brukes bare hvis du bruker mellomrom til innrykk.</p>"
#. +> trunk5
#: utils/katecmds.cpp:128
#, kde-format
msgid ""
"<p>set-indent-mode <b>mode</b></p>"
"<p>The mode parameter is a value as seen in the Tools - Indentation menu</p>"
msgstr ""
"<p>set-indent-mode <b>modus</b></p>"
"<p>The mode parameter en er en verdi som finnes i menyen Verktøy→Innrykk</p>"
#. +> trunk5
#: utils/katecmds.cpp:132
#, kde-format
msgid ""
"<p>set-auto-indent <b>enable</b></p>"
"<p>Enable or disable autoindentation.</p>"
"<p>possible true values: 1 on true<br/>"
"possible false values: 0 off false</p>"
msgstr ""
"<p>set-auto-indent <b>av/på</b></p>"
" "
"<p>Slå på eller av automatisk innrykk,</p>"
" "
"<p>Mulige på-verdier: 1 on true<br/>"
" mulige av-verdier: 0 off false</p>"
#. +> trunk5
#: utils/katecmds.cpp:138
#, kde-format
msgid ""
"<p>set-line-numbers <b>enable</b></p>"
"<p>Sets the visibility of the line numbers pane.</p>"
"<p> possible true values: 1 on true<br/>"
"possible false values: 0 off false</p>"
msgstr ""
"<p>set-line-numbers <b>av/på</b></p>"
" "
"<p>Oppgir om linjenumre skal vises i linjenummer-ruta.</p>"
" "
"<p>Mulige på-verdier: 1 on true<br/>"
" mulige av-verdier: 0 off false</p>"
#. +> trunk5
#: utils/katecmds.cpp:144
#, kde-format
msgid ""
"<p>set-folding-markers <b>enable</b></p>"
"<p>Sets the visibility of the folding markers pane.</p>"
"<p> possible true values: 1 on true<br/>"
"possible false values: 0 off false</p>"
msgstr ""
"<p>set-folding-markers <b>av/på</b></p>"
" "
"<p>Oppgir om brytemerke-ruta skal synes eller ikke.</p>"
"<p>Mulige på-verdier: 1 on true<br/>"
" mulige av-verdier: 0 off false</p>"
#. +> trunk5
#: utils/katecmds.cpp:150
#, kde-format
msgid ""
"<p>set-icon-border <b>enable</b></p>"
"<p>Sets the visibility of the icon border.</p>"
"<p> possible true values: 1 on true<br/>"
"possible false values: 0 off false</p>"
msgstr ""
"<p>set-icon-border <b>av/på</b></p>"
" "
"<p>Oppgir om ikonkanten skal synes.</p>"
" "
"<p>Mulige på-verdier: 1 on true<br/>"
" mulige av-verdier: 0 off false</p>"
#. +> trunk5
#: utils/katecmds.cpp:156
#, kde-format
msgid ""
"<p>set-word-wrap <b>enable</b></p>"
"<p>Enables dynamic word wrap according to <b>enable</b></p>"
"<p> possible true values: 1 on true<br/>"
"possible false values: 0 off false</p>"
msgstr ""
"<p>set.word-wrap <b>av/på</b></p>"
" "
"<p>Slår på/av dynamisk ordbryting.</p>"
" "
"<p>Mulige på-verdier: 1 on true<br/>"
" mulige av-verdier: 0 off false</p>"
#. +> trunk5
#: utils/katecmds.cpp:162
#, kde-format
msgid ""
"<p>set-word-wrap-column <b>width</b></p>"
"<p>Sets the line width for hard wrapping to <b>width</b>. This is used if you are having your text wrapped automatically.</p>"
msgstr ""
"<p>set-word-wrap-column <b>bredde</b></p>"
" "
"<p>Oppgir linjebredden for hard bryting til <b>bredde</b>. Dette brukes hvis du vil at teksten skal brytes automatisk.</p>"
#. +> trunk5
#: utils/katecmds.cpp:166
#, kde-format
msgid ""
"<p>set-replace-tabs-save <b>enable</b></p>"
"<p>When enabled, tabs will be replaced with whitespace whenever the document is saved.</p>"
"<p> possible true values: 1 on true<br/>"
"possible false values: 0 off false</p>"
msgstr ""
"<p>set-replace-tabs-save <b>av/på</b></p>"
" "
"<p>Når dette er <b>på</b> blir TAB-tegn erstattet med tomrom hver gang dokumentet lagres.</p>"
" "
"<p>Mulige på-verdier: 1 on true<br/>"
" mulige av-verdier: 0 off false</p>"
#. +> trunk5
#: utils/katecmds.cpp:172
#, kde-format
msgid ""
"<p>set-highlight <b>highlight</b></p>"
"<p>Sets the syntax highlighting system for the document. The argument must be a valid highlight name, as seen in the Tools → Highlighting menu. This command provides an autocompletion list for its argument.</p>"
msgstr ""
"<p>set-highlight <b>merking</b></p>"
" "
"<p>Oppgir syntaksmerkingssystemet for dokumentet. Argumentet må være et gyldig merkingsnavn, som vist i menyen Verktøy→Syntaksmerking. Denne kommandoen har en autofullføringsliste for argumentet.</p>"
#. +> trunk5
#: utils/katecmds.cpp:176
#, kde-format
msgid ""
"<p>set-mode <b>mode</b></p>"
"<p>Sets the mode as seen in Tools - Mode</p>"
msgstr ""
"<p>set-mode <b>modus</b></p>"
" "
"<p>Setter modus slik det er vist i Verktøy→Modus</p>"
#. +> trunk5
#: utils/katecmds.cpp:180
#, kde-format
msgid ""
"<p>set-show-indent <b>enable</b></p>"
"<p>If enabled, indentation will be visualized by a vertical dotted line.</p>"
"<p> possible true values: 1 on true<br/>"
"possible false values: 0 off false</p>"
msgstr ""
"<p>set-show-indent <b>av/på</b></p>"
" "
"<p>Hvis dette er på blir innrykk visualisert med en loddrett prikket linje.</p>"
" "
"<p>Mulige på-verdier: 1 on true<br/>"
" mulige av-verdier: 0 off false</p>"
#. +> trunk5
#: utils/katecmds.cpp:186
#, kde-format
msgid "<p>Open the Print dialog to print the current document.</p>"
msgstr "<p>Åpne utskriftsdialogen for å skrive ut gjeldende dokument.</p>"
#. +> trunk5
#: utils/katecmds.cpp:301 utils/katecmds.cpp:330
#, kde-format
msgid "Missing argument. Usage: %1 <value>"
msgstr "Mangler argument. Bruk: %1 <value>"
#. +> trunk5
#: utils/katecmds.cpp:314
#, kde-format
msgid "No such highlighting '%1'"
msgstr "Ingen syntaksmerking «%1»"
#. +> trunk5
#: utils/katecmds.cpp:320
#, kde-format
msgid "No such mode '%1'"
msgstr "Ingen modu «%1»"
#. +> trunk5
#: utils/katecmds.cpp:335
#, kde-format
msgid "Failed to convert argument '%1' to integer."
msgstr "Klarte ikke konvertere argumentet «%1» til heltall."
msgid "Here you can choose which mode should be used for the current document. This will influence the highlighting and folding being used, for example."
msgstr "Her kan du velge hvilken modus som skal brukes for gjeldende dokument. Dette vil påvirke f.eks. syntaksmerking og linjebryting."
#. +> trunk5
#: view/katestatusbar.cpp:205
#, kde-format
msgid "Syntax highlighting"
msgstr "Syntaksfremheving"
#. +> trunk5
#: view/katestatusbar.cpp:295
#, fuzzy, kde-format
#| msgid "<em>[BLOCK]</em> %1"
msgid "[BLOCK] %1"
msgstr "<em>[BLOCK]</em> %1"
#. +> trunk5
#: view/katestatusbar.cpp:307
#, fuzzy, kde-format
#| msgid "Line %1, Column %2"
msgid "Line %1 of %2, Column %3"
msgstr "Linje %1, kolonne %2"
#. +> trunk5
#: view/katestatusbar.cpp:312
#, kde-format
msgid "Line %1, Column %2"
msgstr "Linje %1, kolonne %2"
#. +> trunk5
#: view/katestatusbar.cpp:386
#, kde-format
msgid "Meaning of current icon: Document was not modified since it was loaded"
msgstr "Gjeldende ikon betyr: Dokumentet er ikke endret siden det ble lastet inn"
#. +> trunk5
#: view/katestatusbar.cpp:392
#, kde-format
msgid "Meaning of current icon: Document was modified since it was loaded"
msgstr "Gjeldende ikon betyr: Dokumentet er endret siden det ble lastet inn"
#. +> trunk5
#: view/katestatusbar.cpp:398
#, kde-format
msgid "Meaning of current icon: Document was modified or deleted by another program"
msgstr "Gjeldende ikon betyr: Dokumentet er endret eller slettet av et annet program"
#. +> trunk5
#: view/katestatusbar.cpp:410
#, kde-format
msgid "Meaning of current icon: Document is in read-only mode"
msgid "Please specify the wanted indentation width:"
msgstr "Oppgi ønsket innrykksbredde:"
#. +> trunk5
#: view/katestatusbar.cpp:564
#, fuzzy, kde-format
#| msgid "Words %1/%2, Chars %3/%4"
msgctxt "%1 and %3 are the selected words/chars count, %2 and %4 are the total words/chars count."
msgid "Words %1/%2, Chars %3/%4"
msgstr "Ord %1/%2, tegn %3/%4"
#. +> trunk5
#: view/kateview.cpp:478
#, kde-format
msgid "Cut the selected text and move it to the clipboard"
msgstr "Klipp ut merket tekst og flytt den til utklippstavla"
#. +> trunk5
#: view/kateview.cpp:481
#, kde-format
msgid "Paste previously copied or cut clipboard contents"
msgstr "Lim inn tidligere kopiert eller klippet innhold fra utklippstavla"
#. +> trunk5
#: view/kateview.cpp:484
#, kde-format
msgid "Use this command to copy the currently selected text to the system clipboard."
msgstr "Bruk denne kommandoen for å kopiere den merkede teksten til systemets utklippstavle."
#. +> trunk5
#: view/kateview.cpp:486
#, kde-format
msgid "Clipboard &History"
msgstr "&Historie for utklippstavle"
#. +> trunk5
#: view/kateview.cpp:491
#, kde-format
msgid "Save the current document"
msgstr "Lagre det gjeldende dokumentet"
#. +> trunk5
#: view/kateview.cpp:494
#, kde-format
msgid "Revert the most recent editing actions"
msgstr "Angre de siste redigeringene"
#. +> trunk5
#: view/kateview.cpp:497
#, kde-format
msgid "Revert the most recent undo operation"
msgstr "Gjør om de siste angrede handlingene"
#. +> trunk5
#: view/kateview.cpp:501
#, kde-format
msgid "&Scripts"
msgstr "&Skripter"
#. +> trunk5
#: view/kateview.cpp:505
#, kde-format
msgid "Apply &Word Wrap"
msgstr "Bruk &tekstbryting"
#. +> trunk5
#: view/kateview.cpp:506
#, kde-format
msgid ""
"Use this to wrap the current line, or to reformat the selected lines as paragraph, to fit the 'Wrap words at' setting in the configuration dialog.<br />"
"<br />"
"This is a static word wrap, meaning the document is changed."
msgstr ""
#. +> trunk5
#: view/kateview.cpp:512
#, kde-format
msgid "&Clean Indentation"
msgstr "&Fjern innrykk"
#. +> trunk5
#: view/kateview.cpp:513
#, kde-format
msgid ""
"Use this to clean the indentation of a selected block of text (only tabs/only spaces).<br />"
"<br />"
"You can configure whether tabs should be honored and used or replaced with spaces, in the configuration dialog."
msgstr ""
"Bruk dette for å fjerne innrykk fra en markert tekstblokk (bare tabulatorer/bare mellomrom)<br />"
" <br />"
"I oppsettsdialogen kan du velge om tabulatorer skal ha virkning eller erstattes med mellomrom."
#. +> trunk5
#: view/kateview.cpp:518
#, kde-format
msgid "&Align"
msgstr "&Rett inn"
#. +> trunk5
#: view/kateview.cpp:519
#, kde-format
msgid "Use this to align the current line or block of text to its proper indent level."
msgstr "Bruk dette for å justere den valgte linja eller tekstblokka til riktig inrykksnivå."
#. +> trunk5
#: view/kateview.cpp:523
#, kde-format
msgid "C&omment"
msgstr "K&ommentar"
#. +> trunk5
#: view/kateview.cpp:525
#, kde-format
msgid ""
"This command comments out the current line or a selected block of text.<br />"
"<br />"
"The characters for single/multiple line comments are defined within the language's highlighting."
msgstr ""
"Denne kommandoen kommenterer ut gjeldende linje eller en markert tekstblokk. <br />"
" <br />"
"Tegnene for en-linjes/flere linjers kommentar er angitt i syntaksmerkereglene for språket."
#. +> trunk5
#: view/kateview.cpp:530
#, kde-format
msgid "Go to previous editing line"
msgstr "Gå til forrige redigeringslinje"
#. +> trunk5
#: view/kateview.cpp:535
#, kde-format
msgid "Go to next editing line"
msgstr "Gå til neste redigeringslinje"
#. +> trunk5
#: view/kateview.cpp:540
#, kde-format
msgid "Unco&mment"
msgstr "Fjern ko&mmentar"
#. +> trunk5
#: view/kateview.cpp:542
#, kde-format
msgid ""
"This command removes comments from the current line or a selected block of text.<br />"
"<br />"
"The characters for single/multiple line comments are defined within the language's highlighting."
msgstr ""
"Denne kommandoen fjerner kommentartegn fra gjeldende linje eller en markert tekstblokk.<br />"
" <br />"
"Tegnene for en-linjes/flere linjers kommentar er angitt i syntaksmerkereglene for språket."
#. +> trunk5
#: view/kateview.cpp:547
#, kde-format
msgid "Toggle Comment"
msgstr "Slå på/av kommentar"
#. +> trunk5
#: view/kateview.cpp:551
#, kde-format
msgid "&Read Only Mode"
msgstr "&Lesemodus"
# skrivesperre er noe annet :-(
#. +> trunk5
#: view/kateview.cpp:552
#, kde-format
msgid "Lock/unlock the document for writing"
msgstr "Lås, eller lås opp, dokumentet for skriving. "
#. +> trunk5
#: view/kateview.cpp:559
#, kde-format
msgid "Uppercase"
msgstr "Store bokstaver"
#. +> trunk5
#: view/kateview.cpp:561
#, kde-format
msgid "Convert the selection to uppercase, or the character to the right of the cursor if no text is selected."
msgstr "Gjør om det markerte området til store bokstaver. Dersom ingen tekst er markert, blir bare bokstaven til høyre for skrivemerket endret."
#. +> trunk5
#: view/kateview.cpp:567
#, kde-format
msgid "Lowercase"
msgstr "Små bokstaver"
#. +> trunk5
#: view/kateview.cpp:569
#, kde-format
msgid "Convert the selection to lowercase, or the character to the right of the cursor if no text is selected."
msgstr "Gjør om det markerte området til små bokstaver. Dersom ingen tekst er markert, blir bare bokstaven til høyre for skrivemerket endret."
#. +> trunk5
#: view/kateview.cpp:575
#, kde-format
msgid "Capitalize"
msgstr "Store forbokstaver"
#. +> trunk5
#: view/kateview.cpp:577
#, kde-format
msgid "Capitalize the selection, or the word under the cursor if no text is selected."
msgstr "Gjør om til stor forbokstav i det markerte området eller i ordet ved skrivemerket dersom ingenting er merket."
#. +> trunk5
#: view/kateview.cpp:582
#, kde-format
msgid "Join Lines"
msgstr "Slå sammen linjer"
#. +> trunk5
#: view/kateview.cpp:587
#, kde-format
msgid "Invoke Code Completion"
msgstr "Utfør kodefullføring"
#. +> trunk5
#: view/kateview.cpp:588
#, kde-format
msgid "Manually invoke command completion, usually by using a shortcut bound to this action."
msgstr "Utfør kommandofullføring manuelt, som regel ved å bruke en snarvei bundet til denne handlinga."
#. +> trunk5
#: view/kateview.cpp:600
#, kde-format
msgid "Print the current document."
msgstr "Skriv ut gjeldende dokument."
#. +> trunk5
#: view/kateview.cpp:603
#, kde-format
msgid "Show print preview of current document"
msgstr "Vis forhåndsvisning av dokumentet"
#. +> trunk5
#: view/kateview.cpp:607
#, kde-format
msgid "Reloa&d"
msgstr "&Last inn på nytt"
#. +> trunk5
#: view/kateview.cpp:609
#, kde-format
msgid "Reload the current document from disk."
msgstr "Last gjeldende dokument fra disk på nytt."
#. +> trunk5
#: view/kateview.cpp:613
#, kde-format
msgid "Save the current document to disk, with a name of your choice."
msgstr "Lagre gjeldende dokument på disk, med et navn du velger."
#. +> trunk5
#: view/kateview.cpp:615
#, fuzzy, kde-format
#| msgid "Select Encoding..."
msgid "Save As with Encoding..."
msgstr "Velg tegnkoding …"
#. +> trunk5
#: view/kateview.cpp:621
#, kde-format
msgid "Save &Copy As..."
msgstr "Lagre &kopien som …"
#. +> trunk5
#: view/kateview.cpp:622
#, kde-format
msgid "Save a copy of the current document to disk."
msgstr "Lagre en kopi av det gjeldende dokumentet til disk."
#. +> trunk5
#: view/kateview.cpp:626
#, kde-format
msgid "This command opens a dialog and lets you choose a line that you want the cursor to move to."
msgstr "Denne kommandoen åpner en dialog der du kan velge en linje du vil markøren skal gå til."
#. +> trunk5
#: view/kateview.cpp:629
#, kde-format
msgid "Move to Previous Modified Line"
msgstr "Gå til forrige linje med endringer"
#. +> trunk5
#: view/kateview.cpp:630
#, kde-format
msgid "Move upwards to the previous modified line."
msgstr "Flytt markøren til forrige linje med endringer."
#. +> trunk5
#: view/kateview.cpp:634
#, kde-format
msgid "Move to Next Modified Line"
msgstr "Gå til neste linje med endringer"
#. +> trunk5
#: view/kateview.cpp:635
#, kde-format
msgid "Move downwards to the next modified line."
msgstr "Flytt markøren til neste linje med endringer."
#. +> trunk5
#: view/kateview.cpp:639
#, kde-format
msgid "&Configure Editor..."
msgstr "&Tilpass redigerer …"
#. +> trunk5
#: view/kateview.cpp:641
#, kde-format
msgid "Configure various aspects of this editor."
msgstr "Tilpass deler av denne redigereren."
#. +> trunk5
#: view/kateview.cpp:644
#, kde-format
msgid "&Mode"
msgstr "&Modus"
#. +> trunk5
#: view/kateview.cpp:649
#, kde-format
msgid "&Highlighting"
msgstr "S&yntaksmerking"
#. +> trunk5
#: view/kateview.cpp:651
#, kde-format
msgid "Here you can choose how the current document should be highlighted."
msgstr "Her kan du velge hvordan det aktive dokumentet skal utheves."
#. +> trunk5
#: view/kateview.cpp:654
#, kde-format
msgid "&Schema"
msgstr "&Oppsett"
#. +> trunk5
#: view/kateview.cpp:659
#, kde-format
msgid "&Indentation"
msgstr "&Innrykk"
#. +> trunk5
#: view/kateview.cpp:663
#, kde-format
msgid "Select the entire text of the current document."
msgstr "Merk all teksten i dokumentet."
#. +> trunk5
#: view/kateview.cpp:666
#, kde-format
msgid "If you have selected something within the current document, this will no longer be selected."
msgstr "Hvis du har merket noe i det aktive dokumentet vil dette ikke lenger være merket."
#. +> trunk5
#: view/kateview.cpp:670
#, kde-format
msgid "Enlarge Font"
msgstr "Forstørr skrift"
#. +> trunk5
#: view/kateview.cpp:672
#, kde-format
msgid "This increases the display font size."
msgstr "Dette øker skriftstørrelsen på skjermen."
#. +> trunk5
#: view/kateview.cpp:677
#, kde-format
msgid "Shrink Font"
msgstr "Krymp skrift"
#. +> trunk5
#: view/kateview.cpp:679
#, kde-format
msgid "This decreases the display font size."
msgstr "Dette minsker skriftstørrelsen på skjermen."
#. +> trunk5
#: view/kateview.cpp:684
#, fuzzy, kde-format
#| msgctxt "(qtundo-format)"
#| msgid "Set Font Size"
msgid "Reset Font Size"
msgstr "Oppgi skriftstørrelse"
#. +> trunk5
#: view/kateview.cpp:686
#, fuzzy, kde-format
#| msgid "This increases the display font size."
msgid "This resets the display font size."
msgstr "Dette øker skriftstørrelsen på skjermen."
#. +> trunk5
#: view/kateview.cpp:689
#, kde-format
msgid "Bl&ock Selection Mode"
msgstr "&Blokkmerkingsmodus"
#. +> trunk5
#: view/kateview.cpp:692
#, kde-format
msgid "This command allows switching between the normal (line based) selection mode and the block selection mode."
msgstr "Denne kommandoen brukes for å veksle mellom normal valgmodus (linjebasert) og blokkvalg-modus."
#. +> trunk5
#: view/kateview.cpp:696
#, kde-format
msgid "Switch to next Input Mode"
msgstr ""
#. +> trunk5
#: view/kateview.cpp:698
#, kde-format
msgid "Switch to the next input mode."
msgstr ""
#. +> trunk5
#: view/kateview.cpp:701
#, kde-format
msgid "Overwr&ite Mode"
msgstr "Overskr&ivingsmodus"
#. +> trunk5
#: view/kateview.cpp:704
#, kde-format
msgid "Choose whether you want the text you type to be inserted or to overwrite existing text."
msgstr "Velg mellom å sette inn den teksten du skriver, eller å skrive over eksisterende tekst."
#. +> trunk5
#: view/kateview.cpp:711
#, fuzzy, kde-format
#| msgid "If this option is checked, the text lines will be wrapped at the view border on the screen."
msgid ""
"If this option is checked, the text lines will be wrapped at the view border on the screen.<br />"
"<br />"
"This is only a view option, meaning the document will not changed."
msgstr "Hvis du velger dette, vil tekstlinjene brytes ved visningskanten på skjermen."
#. +> trunk5
#: view/kateview.cpp:715
#, kde-format
msgid "Dynamic Word Wrap Indicators"
msgstr "Merke for fleksibel tekstbryting"
#. +> trunk5
#: view/kateview.cpp:717
#, kde-format
msgid "Choose when the Dynamic Word Wrap Indicators should be displayed"
msgstr "Velg når merke for fleksibel tekstbryting skal vises"
#. +> trunk5
#: view/kateview.cpp:719
#, kde-format
msgid "&Off"
msgstr "A&v"
#. +> trunk5
#: view/kateview.cpp:719
#, kde-format
msgid "Follow &Line Numbers"
msgstr "Følg &linjenummer"
#. +> trunk5
#: view/kateview.cpp:719
#, kde-format
msgid "&Always On"
msgstr "&Alltid på"
#. +> trunk5
#: view/kateview.cpp:725
#, fuzzy, kde-format
#| msgid "If this option is checked, the text lines will be wrapped at the view border on the screen."
msgid "If this option is checked, the text lines will be wrapped at the column defined in the editing properties."
msgstr "Hvis du velger dette, vil tekstlinjene brytes ved visningskanten på skjermen."
#. +> trunk5
#: view/kateview.cpp:728
#, kde-format
msgid "Show Static &Word Wrap Marker"
msgstr "Vis &merke for statisk tekstbryting"
#. +> trunk5
#: view/kateview.cpp:730
#, kde-format
msgid "Show/hide the Word Wrap Marker, a vertical line drawn at the word wrap column as defined in the editing properties"
msgstr "Vis/skjul merket for tekstbryting, en loddrett linje som blir vist ved den tekstbrytingskolonnen du har valgt i redigeringsegenskapene"
#. +> trunk5
#: view/kateview.cpp:734
#, kde-format
msgid "Show Folding &Markers"
msgstr "Vis bryte&merker"
#. +> trunk5
#: view/kateview.cpp:737
#, kde-format
msgid "You can choose if the codefolding marks should be shown, if codefolding is possible."
msgstr "Du kan velge om brytemerker for kode skal vises, hvis kodebryting er mulig."
#. +> trunk5
#: view/kateview.cpp:740
#, kde-format
msgid "Show &Icon Border"
msgstr "Vis &ikonkant"
#. +> trunk5
#: view/kateview.cpp:742
#, kde-format
msgid ""
"Show/hide the icon border.<br />"
"<br />"
"The icon border shows bookmark symbols, for instance."
msgstr ""
"Vis/skjul ikonkanten. <br />"
"<br />"
"Ikonkanten viser f.eks. bokmerker."
#. +> trunk5
#: view/kateview.cpp:745
#, kde-format
msgid "Show &Line Numbers"
msgstr "Vis &linjenummer"
#. +> trunk5
#: view/kateview.cpp:748
#, kde-format
msgid "Show/hide the line numbers on the left hand side of the view."
msgstr "Vis/skjul linjenumre på venstre side av visningen."
#. +> trunk5
#: view/kateview.cpp:751
#, kde-format
msgid "Show Scroll&bar Marks"
msgstr "Vis rulle&feltmerker"
#. +> trunk5
#: view/kateview.cpp:753
#, kde-format
msgid ""
"Show/hide the marks on the vertical scrollbar.<br />"
"<br />"
"The marks show bookmarks, for instance."
msgstr ""
"Vis/skjul merkene på det loddrette rullefeltet.<br />"
"<br />"
"Merkene viser f.eks. bokmerker."
#. +> trunk5
#: view/kateview.cpp:756
#, kde-format
msgid "Show Scrollbar Mini-Map"
msgstr "Vis minikart for rullefelt"
#. +> trunk5
#: view/kateview.cpp:758
#, kde-format
msgid ""
"Show/hide the mini-map on the vertical scrollbar.<br />"
"<br />"
"The mini-map shows an overview of the whole document."
msgstr ""
"Vis/skjul minikartet på det loddrette rullefeltet.<br />"
"<br />"
"Minikartet viser en oversikt over hele dokumentet."
#. i18n("Show the whole document in the Mini-Map"), this);
#. a->setWhatsThis(i18n("Display the whole document in the mini-map.<br /><br />With this option set the whole document will be visible in the mini-map."));
"<p>Quits the application. If <tt>w</tt> is prepended, it also writes the document(s) to disk. This command can be called in several ways:<br />"
" <tt>q</tt> — closes the current view.<br />"
" <tt>qa</tt> — closes all views, effectively quitting the application.<br />"
" <tt>wq</tt> — writes the current document to disk and closes its view.<br />"
" <tt>wqa</tt> — writes all documents to disk and quits.</p>"
"<p>In all cases, if the view being closed is the last view, the application quits. If no file name is associated with the document and it should be written to disk, a file dialog will be shown.</p>"
" <tt>qa</tt> — lukker alle visninger,slik at programmet avslutter.<br />"
" <tt>wq</tt> — skriver gjeldende dokument til disk og lukker den visningen.<br />"
" <tt>wqa</tt> — skriver alle dokumenter til disk og avslutter.</p>"
" "
"<p>I alle tilfeller avslutter programmet hvis den visningen som lukkes er den siste. Hvis det ikke er tilknyttet et filnavn til dokumentet og det skal lagres, så blir det vist en filvelgerdialog.</p>"
#. +> trunk5
#: vimode/appcommands.cpp:237
#, kde-format
msgid ""
"<p><b>x/xa — write and quit</b></p>"
"<p>Usage: <tt><b>x[a]</b></tt></p>"
"<p>Saves document(s) and quits (e<b>x</b>its). This command can be called in two ways:<br />"
" <tt>x</tt> — closes the current view.<br />"
" <tt>xa</tt> — closes all views, effectively quitting the application.</p>"
"<p>In all cases, if the view being closed is the last view, the application quits. If no file name is associated with the document and it should be written to disk, a file dialog will be shown.</p>"
"<p>Unlike the 'w' commands, this command only writes the document if it is modified.</p>"
msgstr ""
"<p><b>x/xa — skriv og avslutt</b></p>"
"<p>Bruk: <tt><b>x[a]</b></tt></p>"
"<p>Lagrer dokument(er) og avslutter (e<b>x</b>it). Kommandoen kan kalles på to måter:<br />"
"<tt>xa</tt> — lukker alle visninger, slik at programmet avslutter.</p>"
" "
"<p>I alle tilfeller avslutter programmet hvis den visningen som blir lukket er den siste visningen. Det blir vist en dialog hvis dokumentet burde lagres men kke har noe filnavn tilknyttet.</p>"
"<p>Til forskjell fra 'w'-kommandoene skriver denne kommandoen til disk bare hvis dokumentet er endret.</p>"
#. +> trunk5
#: vimode/appcommands.cpp:250
#, kde-format
msgid ""
"<p><b>sp,split— Split horizontally the current view into two</b></p>"
"<p>Usage: <tt><b>sp[lit]</b></tt></p>"
"<p>The result is two views on the same document.</p>"
msgstr ""
"<p><b>sp,split — Del den gjeldende visningen vannrett i to deler</b></p>"
"<p>Bruk: <tt><b>sp[lit]</b></tt></p>"
"<p>Resultatet er to visninger av det samme dokumentet.</p>"
#. +> trunk5
#: vimode/appcommands.cpp:255
#, kde-format
msgid ""
"<p><b>vs,vsplit— Split vertically the current view into two</b></p>"
"<p>Usage: <tt><b>vs[plit]</b></tt></p>"
"<p>The result is two views on the same document.</p>"
msgstr ""
"<p><b>vs,vsplit — Del den gjeldende visningen loddrett i to deler</b></p>"
"<p>Bruk: <tt><b>vs[plit]</b></tt></p>"
" "
"<p>Resultatet er to visninger av det samme dokumentet.</p>"
#. +> trunk5
#: vimode/appcommands.cpp:260
#, kde-format
msgid ""
"<p><b>clo[se]— Close the current view</b></p>"
"<p>Usage: <tt><b>clo[se]</b></tt></p>"
"<p>After executing it, the current view will be closed.</p>"
msgstr ""
"<p><b>clo[se] — Lukk den gjeldende visningen</b></p>"
"<p>Bruk: <tt><b>CLO[se]</b></tt></p>"
"<p>Når det er kjørt vil gjeldende visning bli lukket.</p>"
#. +> trunk5
#: vimode/appcommands.cpp:265
#, kde-format
msgid ""
"<p><b>[v]new — split view and create new document</b></p>"
"<p>Usage: <tt><b>[v]new</b></tt></p>"
"<p>Splits the current view and opens a new document in the new view. This command can be called in two ways:<br />"
" <tt>new</tt> — splits the view horizontally and opens a new document.<br />"
" <tt>vnew</tt> — splits the view vertically and opens a new document.<br />"
"</p>"
msgstr ""
"<p><b>[v]new — del opp visning og opprett nytt dokument</b></p>"
"<p>Bruk: <tt><b>[v]new</b></tt></p>"
" "
"<p>Deler den gjeldende visningen og åpner et nytt dokument i den nye visningen. Kommandoen kan kalles på to måter:<br />"
" <tt>new</tt> — deler visningen vannrett og åpner et nytt dokument.<br />"
" <tt>vnew</tt> — deler visningen loddret og åpner et nytt dokument.<br />"
"</p>"
#. +> trunk5
#: vimode/appcommands.cpp:274
#, kde-format
msgid ""
"<p><b>e[dit] — reload current document</b></p>"
"<p>Usage: <tt><b>e[dit]</b></tt></p>"
"<p>Starts <b>e</b>diting the current document again. This is useful to re-edit the current file, when it has been changed by another program.</p>"
msgstr ""
"<p><b>e[dit] — last gjeldende dokument på nytt</b></p>"
"<p>Bruk: <tt><b>e[dit]</b></tt></p>"
"<p>Starter å r<b>e</b>digere det gjeldende dokumentet igjen. Dette er nyttig for å redigere den gjeldende fila på nytt når den er blitt endret av et annet program.</p>"
#. +> trunk5
#: vimode/appcommands.cpp:492
#, kde-format
msgid ""
"<p><b>b,buffer — Edit document N from the document list</b></p>"
"<p>Usage: <tt><b>b[uffer] [N]</b></tt></p>"
msgstr ""
"<p><b>b,buffer — Rediger dokument N fra dokumentlista</b></p>"
"<p>Bruk: <tt><b>b[uffer] [N] </b></tt></p>"
#. +> trunk5
#: vimode/appcommands.cpp:497
#, kde-format
msgid ""
"<p><b>bp,bprev — previous buffer</b></p>"
"<p>Usage: <tt><b>bp[revious] [N]</b></tt></p>"
"<p>Goes to <b>[N]</b>th previous document (\"<b>b</b>uffer\") in document list. </p>"
"<p> <b>[N]</b> defaults to one. </p>"
"<p>Wraps around the start of the document list.</p>"
msgstr ""
"<p><b>bp, bprev — forrige buffer</b></p>"
"<p>Bruk; <tt><b>bn[ext] [N] </b></tt></p>"
" "
"<p>Går til det <b>[N]</b>'te forrige dokumentet («<b>b</b>uffer») i dokumentlista. <b>[N]</b> settes til 1 hvis ikke oppgitt.</p>"
" "
"<p>Går rundt begynnelsen av dokumentlista.</p>"
" "
#. +> trunk5
#: vimode/appcommands.cpp:505
#, kde-format
msgid ""
"<p><b>bn,bnext — switch to next document</b></p>"
"<p>Usage: <tt><b>bn[ext] [N]</b></tt></p>"
"<p>Goes to <b>[N]</b>th next document (\"<b>b</b>uffer\") in document list.<b>[N]</b> defaults to one. </p>"
"<p>Wraps around the end of the document list.</p>"
msgstr ""
"<p><b>bn, bnext — bytt til neste dokument</b></p>"
" "
"<p>Bruk; <tt><b>bn[ext] [N] </b></tt></p>"
" "
"<p>Går til det <b>[N]</b>'te neste dokumentet («<b>b</b>uffer») i dokumentlista. <b>[N]</b> settes til 1 hvis ikke oppgitt.</p>"
" "
"<p>Går rundt slutten av dokumentlista.</p>"
" "
#. +> trunk5
#: vimode/appcommands.cpp:513
#, kde-format
msgid ""
"<p><b>bf,bfirst — first document</b></p>"
"<p>Usage: <tt><b>bf[irst]</b></tt></p>"
"<p>Goes to the <b>f</b>irst document (\"<b>b</b>uffer\") in document list.</p>"
msgstr ""
"<p><b>bf,bfirst — første dokument</b</p>"
" "
"<p>Bruk: <tt><b>bf[irst]</b></tt></p>"
" "
"<p>Går til det <b>f</b>ørste dokumentet («<b>b</b>uffer») i dokumentlista.</p>"
#. +> trunk5
#: vimode/appcommands.cpp:519
#, kde-format
msgid ""
"<p><b>bl,blast — last document</b></p>"
"<p>Usage: <tt><b>bl[ast]</b></tt></p>"
"<p>Goes to the <b>l</b>ast document (\"<b>b</b>uffer\") in document list.</p>"
msgstr ""
"<p><b>bl,blast — siste dokument</b</p>"
" "
"<p>Bruk: <tt><b>bl[ast]</b></tt></p>"
" "
"<p>Går til det siste dokumentet («<b>b</b>uffer») i dokumentlista.</p>"
msgid "When selected, vi commands will override Kate's built-in commands. For example: Ctrl+R will redo, and override the standard action (showing the search and replace dialog)."
msgstr "Når dette er valgt vil vi-kommandoer overstyre Kates innebygde kommandoer. Ctrl+R, for eksempel, vil gjøre om, og overstyre standardhandlinga (vise søk-og-erstatt-dialogen)."
"Key mapping is used to change the meaning of typed keys. This allows you to move commands to other keys or make special keypresses for doing a series of commands.\n"
"\n"
"Example:\n"
"\"<F2>\" → \"I-- <esc>\"\n"
"\n"
"This will prepend \"-- \" to a line when pressing F2."
msgstr ""
"Tastetilordning brukes til å endre betydningen av tastetrykk. På denne måten kan du flytte kommandoer til andre taster, eller lage spesielle tastetrykk for flere kommandoer etter hverandre.\n"
"\n"
"Eksempel:\n"
"\"<F2>\" → \"I-- <esc>\"\n"
"Dette setter inn «--» foran på en linje når F2 trykkes."
#~ msgid "Show static word wra&p marker (if applicable)"
#~ msgstr "&Vis statisk tekstbrytingsmerke (når det passer)"
#~ msgid "A file named \"%1\" already exists. Are you sure you want to overwrite it?"
#~ msgstr "Det finnes allerede en fil som heter %1». Er du sikker på at du vil overskrive den?"
#~ msgid "Overwrite File?"
#~ msgstr "Skriv over fil?"
#~ msgid "Highlight trailing &spaces"
#~ msgstr "&Uthev mellomrom på slutten av linja"
#~ msgid "Spellcheck Selection..."
#~ msgstr "Stavekontroller utvalg …"
#~ msgid "Check spelling of the selected text"
#~ msgstr "Stavekontroller merket tekst"
#~ msgid ""
#~ "Use this command to wrap all lines of the current document which are longer than the width of the current view, to fit into this view.<br />"
#~ "<br />"
#~ " This is a static word wrap, meaning it is not updated when the view is resized."
#~ msgstr ""
#~ "Bruk denne kommandoen for å bryte alle linjer i gjeldende dokument som er lengre enn bredden på visningen, slik at de passer i denne visningen. <br />"
#~ "<br />"
#~ "Dette er statisk linjebryting, dvs. den blir ikke oppdatert når visningen endrer størrelse."
#~ msgid "Unfold Current Node"
#~ msgstr "Fold ut gjeldende node"
#~ msgid "&Go to line:"
#~ msgstr "&Gå til linje:"
#~ msgid "Go"
#~ msgstr "Gå"
#~ msgid "Words and Chars count in document/selection."
#~ msgstr "Ord- og tegntall i dokument/utvalg"
#~ msgid "What do you want to do?"
#~ msgstr "Hva vil du gjøre?"
#~ msgid "File Was Changed on Disk"
#~ msgstr "Fila er endret på disken"
#~ msgid "&Reload File"
#~ msgstr "Åpne fila på &nytt"
#~ msgid "&Ignore Changes"
#~ msgstr "&Ignorer endringene"
#~ msgctxt "value for variale remove-trailing-spaces"
#~ msgid "all"
#~ msgstr "alle"
#~ msgid "Download Highlighting Files..."
#~ msgstr "Last ned regler for syntaksmerking …"
#~ msgid "Highlight Download"
#~ msgstr "Nedlasting av syntaksmerkingsregler"
#~ msgid "Select the syntax highlighting files you want to update:"
#~ msgstr "Velg syntaksmerking-filene du vil oppdatere:"
#~ msgid "Installed"
#~ msgstr "Installert"
#~ msgid "Latest"
#~ msgstr "Siste"
#~ msgid "<b>Note:</b> New versions are selected automatically."
#~ msgstr "<b>Merknad:</b> Nye versjoner er valgt automatisk."
#~ msgid "&Install"
#~ msgstr "&Installer"
#~ msgid "The list of highlightings could not be found on / retrieved from the server"
#~ msgstr "Lista over framhevinger kunne ikke finnes på/hentet fra tjeneren"
#~ msgctxt "Syntax highlighting"
#~ msgid "None"
#~ msgstr "Ingen"
#~ msgid "Normal Text"
#~ msgstr "Normal tekst"
#~ msgid "<b>%1</b>: Deprecated syntax. Attribute (%2) not addressed by symbolic name<br />"
#~ msgstr "<b>%1</b>: Foreldet syntaks. Attributtet (%2) er ikke adressert med det symbolske navnet.<br />"
#~ msgid "<b>%1</b>: Deprecated syntax. Context %2 has no symbolic name<br />"
msgid "<qt>Error when attempting to initialize OpenPGP while attempting to save the wallet <b>%1</b>. Error code is <b>%2</b>. Please fix your system configuration, then try again.</qt>"
msgstr "<qt>Feil ved forsøk på å klargjøre OpenPGP mens det forsøkes å lagre lommeboka <b>%1</b>. Feilkoden er <b>%2</b>. Rett på systemoppsettet og forsøk igjen.</qt>"
#. +> trunk5
#: backend/backendpersisthandler.cpp:513
#, kde-format
msgid "<qt>Error when attempting to initialize OpenPGP while attempting to save the wallet <b>%1</b>. Please fix your system configuration, then try again.</qt>"
msgstr "<qt>Feil ved forsøk på å klargjøre OpenPGP mens det forsøkes å lagre lommeboka <b>%1</b>. Rett på systemoppsettet og forsøk igjen.</qt>"
#. +> trunk5
#: backend/backendpersisthandler.cpp:564
#, kde-format
msgid "<qt>Encryption error while attempting to save the wallet <b>%1</b>. Error code is <b>%2 (%3)</b>. Please fix your system configuration, then try again. This error may occur if you are not using a full trust GPG key. Please ensure you have the secret key for the key you are using.</qt>"
msgstr "<qt>Krypteringsfeil ved forsøk på å lagre lommeboka <b>%1</b>. Feilkoden er <b> %2 (%3)</b>. Rett på systemoppsettet og forsøk igjen. Denne feilen kan oppstå hvis du ikke bruker en fullstendig tiltrodd GPG-nøkkel. Pass på at du har den private nøkkelen som svarer til den nøkkelen du bruker.</qt>"
#. +> trunk5
#: backend/backendpersisthandler.cpp:576
#, kde-format
msgid "<qt>File handling error while attempting to save the wallet <b>%1</b>. Error was <b>%2</b>. Please fix your system configuration, then try again.</qt>"
msgstr "<qt>Filhåndteringsfeil ved forsøk på å lagre lommeboka <b>%1</b>. Feilkoden er <b>%2</b>. Rett på systemoppsettet og forsøk igjen.</qt>"
#. +> trunk5
#: backend/backendpersisthandler.cpp:594
#, kde-format
msgid "<qt>Error when attempting to initialize OpenPGP while attempting to open the wallet <b>%1</b>. Error code is <b>%2</b>. Please fix your system configuration, then try again.</qt>"
msgstr "<qt>Feil ved forsøk på å klargjøre OpenPGP mens det forsøkes å åpne lommeboka <b>%1</b>. Feilkoden er <b>%2</b>. Rett på systemoppsettet og forsøk igjen.</qt>"
#. +> trunk5
#: backend/backendpersisthandler.cpp:612
#, kde-format
msgid "<qt>Error when attempting to initialize OpenPGP while attempting to open the wallet <b>%1</b>. Please fix your system configuration, then try again.</qt>"
msgstr "<qt>Feil ved forsøk på å klargjøre OpenPGP mens det forsøkes å åpne lommeboka <b>%1</b>. Rett på systemoppsettet og forsøk igjen.</qt>"
#. +> trunk5
#: backend/backendpersisthandler.cpp:622
#, kde-format
msgid "Retry"
msgstr "Prøv igjen"
#. +> trunk5
#: backend/backendpersisthandler.cpp:624
#, kde-format
msgid ""
"<qt>Error when attempting to decrypt the wallet <b>%1</b> using GPG. If you're using a SmartCard, please ensure it's inserted then try again.<br>"
"<br>"
"GPG error was <b>%2</b></qt>"
msgstr ""
"<qt>Feil under forsøk på å dekryptere lommeboka <b>%1</b> med GPG. Hvis du bruker et Smartkort, så se etter at det er satt inn og forsøk igjen.<br>"
" <br>"
" GPG-feilen var <b>%2</b></qt>"
#. +> trunk5
#: backend/backendpersisthandler.cpp:625
#, kde-format
msgid "kwalletd GPG backend"
msgstr "kwalletd GPG bakstykke"
#. +> trunk5
#: backend/backendpersisthandler.cpp:668
#, kde-format
msgid "<qt>Error when attempting to open the wallet <b>%1</b>. The wallet was encrypted using the GPG Key ID <b>%2</b> but this key was not found on your system.</qt>"
msgstr "<qt>Feil ved forsøk på å åpne lommeboka <b>%1</b>. Lommeboka er kryptert med GPG nøkkel-D <b>%2</b>, men denne nøkkelen finnes ikke på systemet ditt.</qt>"
#. +> trunk5
#: backend/kwalletbackend.cc:264
#, kde-format
msgid "Already open."
msgstr "Åpnet fra før."
#. +> trunk5
#: backend/kwalletbackend.cc:266
#, kde-format
msgid "Error opening file."
msgstr "Feil ved åpning av fil."
#. +> trunk5
#: backend/kwalletbackend.cc:268
#, kde-format
msgid "Not a wallet file."
msgstr "Ikke en lommebokfil."
#. +> trunk5
#: backend/kwalletbackend.cc:270
#, kde-format
msgid "Unsupported file format revision."
msgstr "Det er ikke støtte for denne revisjonen av filformatet."
msgid "<qt>KDE has requested to create a new wallet named '<b>%1</b>'. This is used to store sensitive data in a secure fashion. Please choose the new wallet's type below or click cancel to deny the application's request.</qt>"
msgstr "<qt>KDE har bedt om å lage en ny lommebok med navn «<b>%1</b>». Denne brukes til å lagre følsomme data på en trygg måte. Oppgi et passord for denne nye lommeboka eller trykk Avbryt for å avslå programmets forespørsel.</qt>"
#. +> trunk5
#: knewwalletdialog.cpp:64
#, kde-format
msgid "<qt>The application '<b>%1</b>' has requested to create a new wallet named '<b>%2</b>'. This is used to store sensitive data in a secure fashion. Please choose the new wallet's type below or click cancel to deny the application's request.</qt>"
msgstr "<qt>Programmet <b>«%1»</b> har bedt om å få lage en ny lommebok med navn «<b>%2</b>». Denne brukes til å lagre følsomme data på en trygg måte. Oppgi et passord for denne lommeboka eller trykk Avbryt for å avslå programmets forespørsel.</qt>"
"<p>The application '<span style=\" font-weight:600;\">%1</span>' has requested to open the KDE wallet. This is used to store sensitive data in a secure fashion. Please choose the new wallet's type below or click cancel to deny the application's request.</p>"
"</body></html>"
msgstr ""
"<html><head/><body>"
"<p>Programmet «<span style=\" font-weight:600;\">%1</span>» har bedt om å få åpne KDE-lommeboka. Denne brukes til å lagre følsomme data på en trygg måte. Oppgi et passord for denne lommeboka eller trykk Avbryt for å nekte programmet tilgang.</p>"
msgid "An application has requested to open a wallet (%1)."
msgstr "Et program har bedt om å få åpne en lommebok (%1)."
#. +> trunk5
#: kwalletd.cpp:656
#, kde-format
msgctxt "Text of a button for switching to the (unnamed) application requesting a password"
msgid "Switch there"
msgstr "Bytt dit"
#. +> trunk5
#: kwalletd.cpp:660
#, kde-format
msgid "<b>%1</b> has requested to open a wallet (%2)."
msgstr "<b>%1</b> har bedt om å åpne en lommebok (%2)."
#. +> trunk5
#: kwalletd.cpp:668
#, kde-format
msgctxt "Text of a button for switching to the application requesting a password"
msgid "Switch to %1"
msgstr "Bytt til %1"
#. +> trunk5
#: kwalletd.cpp:684 kwalletd.cpp:789
#, kde-format
msgid ""
"<qt>Error opening the wallet '<b>%1</b>'. Please try again.<br />"
"(Error code %2: %3)</qt>"
msgstr ""
"<qt>Feil ved åpning av lommeboka «<b>%1</b>». Forsøk igjen. <br />"
"(Feilkode %2: %3)</qt>"
#. +> trunk5
#: kwalletd.cpp:743
#, kde-format
msgid "KDE has requested to open the wallet. This is used to store sensitive data in a secure fashion. Please enter a password to use with this wallet or click cancel to deny the application's request."
msgstr "KDE har bedt om å få åpne lommeboka. Denne brukes til å lagre følsomme data på en trygg måte. Oppgi et passord for denne lommeboka eller trykk Avbryt for å nekte programmet tilgang."
#. +> trunk5
#: kwalletd.cpp:751
#, kde-format
msgid "<qt>The application '<b>%1</b>' has requested to open the KDE wallet. This is used to store sensitive data in a secure fashion. Please enter a password to use with this wallet or click cancel to deny the application's request.</qt>"
msgstr "<qt>Programmet «<b>%1</b>» har bedt om å få åpne KDE-lommeboka. Denne brukes til å lagre følsomme data på en trygg måte. Oppgi et passord for denne lommeboka eller trykk Avbryt for å nekte programmet tilgang.</qt>"
#. +> trunk5
#: kwalletd.cpp:763
#, kde-format
msgid "<qt>KDE has requested to create a new wallet named '<b>%1</b>'. Please choose a password for this wallet, or cancel to deny the application's request.</qt>"
msgstr "<qt>KDE har bedt om å få opprette en ny lommebok med navnet «<b>%1</b>». Velg et passord for denne lommeboka, eller avbryt for å nekte forespørselen.</qt>"
#. +> trunk5
#: kwalletd.cpp:771
#, kde-format
msgid "<qt>The application '<b>%1</b>' has requested to create a new wallet named '<b>%2</b>'. Please choose a password for this wallet, or cancel to deny the application's request.</qt>"
msgstr "<qt>Programmet «<b>%1</b>» har bedt om å få opprette en ny lommebok med navnet «<b>%2</b>». Velg et passord for denne lommeboka, eller avbryt for å nekte forespørselen.</qt>"
#. +> trunk5
#: kwalletd.cpp:896
#, kde-format
msgid "<qt>KDE has requested access to the open wallet '<b>%1</b>'.</qt>"
msgstr "<qt>KDE har bedt om tilgang til den åpne lommeboka «<b>%1</b>».</qt>"
#. +> trunk5
#: kwalletd.cpp:902
#, kde-format
msgid "<qt>The application '<b>%1</b>' has requested access to the open wallet '<b>%2</b>'.</qt>"
msgstr "<qt>Programmet «<b>%1</b>» har bedt om tilgang til den åpne lommeboka «<b>%2</b>».</qt>"
#. +> trunk5
#: kwalletd.cpp:1021
#, kde-format
msgid "Unable to open wallet. The wallet must be opened in order to change the password."
msgstr "Kan ikke åpne lommeboka. Lommeboka må åpnes for å kunne endre passordet."
#. +> trunk5
#: kwalletd.cpp:1038
#, kde-format
msgid "<qt>The <b>%1</b> wallet is encrypted using GPG key <b>%2</b>. Please use <b>GPG</b> tools (such as <b>kleopatra</b>) to change the passphrase associated to that key.</qt>"
msgstr "<qt>Lommeboka <b>%1</b> er kryptert med GPG-nøkkelen <b>%2</b>. Bruk <b>GPG</b>-verktøy (slik som <b>kleopatra</b>) til å endre pass-setningen for den nøkkelen.</qt>"
#. +> trunk5
#: kwalletd.cpp:1047
#, kde-format
msgid "<qt>Please choose a new password for the wallet '<b>%1</b>'.</qt>"
msgstr "<qt>Velg nytt passord for lommeboka <b>«%1»</b>.</qt>"
#. +> trunk5
#: kwalletd.cpp:1062
#, kde-format
msgid "Error re-encrypting the wallet. Password was not changed."
msgstr "Feil ved ny kryptering av lommeboka. Passordet ble ikke endret."
#. +> trunk5
#: kwalletd.cpp:1071
#, kde-format
msgid "Error reopening the wallet. Data may be lost."
msgstr "Feil ved gjenåpning av lommeboka. Noen data kan være mistet."
#. +> trunk5
#: kwalletd.cpp:1622
#, kde-format
msgid "There have been repeated failed attempts to gain access to a wallet. An application may be misbehaving."
msgstr "Det har vært gjort flere mislykte forsøk på å få tilgang til en lommebok. Det kan være et program som ikke oppfører seg pent."
#. +> trunk5
#: kwalletwizard.cpp:51
#, kde-format
msgid "KWallet"
msgstr "KWallet"
#. +> trunk5
#: kwalletwizard.cpp:275
#, kde-format
msgid "<qt>Password is empty. <b>(WARNING: Insecure)</b></qt>"
"<p>The KDE Wallet system stores your data in a <span style=\" font-style:italic;\">wallet</span> file on your local hard disk. The data is only written in the encrypted form of your choice - blowfish algorithm with your password as the key or using a GPG encryption key. When a wallet is opened, the wallet manager application will launch and display an icon in the system tray. You can use this application to manage all of your wallets. It even permits you to drag wallets and wallet contents, allowing you to easily copy a wallet to a remote system.</p>"
"</body></html>"
msgstr ""
"<html><head/><body> "
"<p>KWallet-systemet lagrer opplysningene dine i en <span style=\" font-style:italic;\">lommebok-fil</span> på den lokale disken. Dataene skrives bare i kryptert form som du velger, «blowfish»-algoritmen med passordet ditt som nøkkel eller en GPG krypteringsnøkkel. Når en lommebok åpnes, så starter programmet for lommebok-håndtering og viser et ikon i systemkurven. Du kan bruke dette programmet til å holde styr på lommebøkene dine. Du kan til og med dra lommebøker og innhold i lommebøker, slik at du lett kan kopiere en lommebok til en annen maskin.</p>"
"<p>The GPG-based wallet use a GPG encryption key to securely encrypt data on disk. The key must be available when decrypting is needed or your wallet will not be accessible. For example, if you choose a SmartCard-based encryption key, the GPG system will prompt you to enter it and its associated PIN when attempting to open the wallet. <span style=\" font-weight:600;\">NOTE:</span> this list contains only \"ultimate-level\" trusted keys.</p>"
"</body></html>"
msgstr ""
"<html><head/><body> "
"<p>GPG-basert lommebok bruker en GPG krypteringsnøkkel til å kryptere data trygt på disk. Nøkkelen må være tilgjengelig når det trengs dekryptering, ellers vil ikke lommeboka være tilgjengelig. Hvis du for eksempel velger en krypteringsnøkkel basert på SmartCard, så vil GPG-systemet be deg sette inn kortet og taste PIN-koden når det forsøker å åpne lommeboka.<span style=\"font-weight:500;\">MERK:</span> denne lista inneholder bare nøkler som har fullstendig tillit.</p>"
msgid "Unable to locate at least one <b>encrypting GPG key</b>. KDE Wallet needs such <b>encrypting key</b> to securely store passwords or other sensitive data on disk. If you still want to setup a GPG-based wallet, then cancel this wizard, set-up an <b>encrypting GPG key</b>, then retry this assistant. Otherwise, you may still click back, then choose a classic, blowfish encrypted file format on the previous page."
msgstr "Klarer ikke å finne minst én <b>GPG-nøkkel for kryptering</b>. KDE Wallet trenger en slik <b>krypteringsnøkkel</b> for å kunne lagre trygt passord og andre sensitive data på disken. Hvis du fremdeles vil sette opp en GPG-basert lommebok, så avbryt denne veiviseren, sett opp en <b>GPG krypteringsnøkkel</b>, og start veiviseren igjen. Ellers kan du godt klikke tilbake og velge et klassisk blowfish-basert kryptert filformat på forrige side."
msgid "Welcome to KWallet, the KDE Wallet System. KWallet allows you to store your passwords and other personal information on disk in an encrypted file, preventing others from viewing the information. This wizard will tell you about KWallet and help you configure it for the first time."
msgstr "Dette er KWallet – KDEs lommeboksystem. Med KWallet kan du lagre passordene dine og andre personlige opplysninger på disken i en kryptert fil, slik at andre ikke kan se denne informasjonen. Denne veiviseren gir deg informasjon om KWallet og hjelper deg å sette opp innstillingene den første gangen."
msgid "The KDE Wallet system allows you to control the level of security of your personal data. Some of these settings do impact usability. While the default settings are generally acceptable for most users, you may wish to change some of them. You may further tune these settings from the KWallet control module."
msgstr "Med KDEs lommeboksystem kan du bestemme sikkerhetsnivået for dine personlige opplysninger. Noen av disse innstillingene gjør systemet litt vanskeligere å bruke. Standard-innstillingene er vanligvis akseptable for de fleste brukere, men det kan være at du vil endre noen av dem. Du kan justere innstillingene videre med kontrollmodulen for KWallet."
msgid "Various applications may attempt to use the KDE wallet to store passwords or other information such as web form data and cookies. If you would like these applications to use the wallet, you must enable it now and choose a password. The password you choose <i>cannot</i> be recovered if it is lost, and will allow anyone who knows it to obtain all the information contained in the wallet."
msgstr "Forskjellige programmer kan forsøke å bruke lommeboka til å lagre passord eller andre data, slik som skjemaopplysninger fra et nettsted eller informasjonskapsler. Hvis du vil at disse programmene skal bruke lommeboka, så må du slå på dette nå og velge et passord. Det passordet du velger <i>kan ikke hentes fram </i> hvis du glemmer eller mister det, og alle som kjenner det kan lese alt innhold i lommeboka."
"<p>Various applications may attempt to use the KDE wallet to store passwords or other information such as web form data and cookies. If you would like these applications to use the wallet, you must enable it now and choose method for its encryption.</p>"
"<p>GPG method is more secure, but you must have configured at least one encrypting key on your system.</p>"
"<p>If you choose the classic format, be warned that the password you choose <span style=\" font-style:italic;\">cannot</span> be recovered if it is lost, and will allow anyone who knows it to obtain all the information contained in the wallet.</p>"
"</body></html>"
msgstr ""
"<html><head/><body> "
"<p>Forskjellige programmer kan forsøke å bruke lommeboka til å lagre passord eller andre data, slik som skjemaopplysninger fra et nettsted eller informasjonskapsler. Hvis du vil at disse programmene skal bruke lommeboka, så må du slå på dette nå og velge krypteringsmetode.</p>"
" "
"<p>GPG-metoden er sikrere, men du må ha satt opp minst én krypteringsnøkkel på systemet ditt.</p>"
" "
"<p>Hvis du velger klassisk format, så vær klar over at passordet du velger <span style=\" font-style:italic;\">kan ikke</span> gjenskapes hvis du mister det, og at alle som får tak i det kan få tak i alle opplysninger som er lagret i lommeboka.</p>"
msgid "In this row you can customize left click behavior when clicking into an inactive inner window ('inner' means: not titlebar, not frame)."
msgstr "Her kan du velge hva som skjer når du trykker med venstre museknapp på den indre delen av et inaktivt vindu («indre» betyr: ikke tittellinja eller ramma)."
msgid "In this row you can customize middle click behavior when clicking into an inactive inner window ('inner' means: not titlebar, not frame)."
msgstr "Her kan du velge hva som skal skje når du klikker med midtre museknapp på den indre delen av et inaktivt vindu («indre» betyr: ikke tittellinja eller ramma)."
+msgid "When turned on attempt to automatically detect when a newly opened window is related to an existing one and place them in the same window group."
+msgstr "Når dette er slått på forsøkes det å bestemme automatisk når et nylig åpnet vindu er relatert til et som er åpnet før, og plassere dem i samme vindusgruppe."
"<li style=\" margin-top:12px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-style:italic;\">Smart</span> will try to achieve a minimum overlap of windows</li>"
"<li style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-style:italic;\">Maximizing</span> will try to maximize every window to fill the whole screen. It might be useful to selectively affect placement of some windows using the window-specific settings.</li>"
"<li style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-style:italic;\">Cascade</span> will cascade the windows</li>"
"<li style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-style:italic;\">Random</span> will use a random position</li>"
"<li style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-style:italic;\">Centered</span> will place the window centered</li>"
"<li style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-style:italic;\">Zero-cornered</span> will place the window in the top-left corner</li>"
"<li style=\" margin-top:0px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-style:italic;\">Under mouse</span> will place the window under the pointer</li>"
"The placement policy determines where a new window will appear on the desktop.<br>"
"<ul>\n"
"<li><em>Smart</em> will try to achieve a minimum overlap of windows</li>"
"\n"
"<li><em>Maximizing</em> will try to maximize every window to fill the whole screen. It might be useful to selectively affect placement of some windows using the window-specific settings.</li>"
"\n"
"<li><em>Cascade</em> will cascade the windows</li>"
"\n"
"<li><em>Random</em> will use a random position</li>"
"\n"
"<li><em>Centered</em> will place the window centered</li>"
"\n"
"<li><em>Zero-Cornered</em> will place the window in the top-left corner</li>"
"\n"
"<li><em>Under Mouse</em> will place the window under the pointer</li>"
"\n"
"</ul>"
msgstr ""
"Plasseringsreglene bestemmer hvor et nytt vindu vil opptre på skrivebordet.<br>"
"<ul>\n"
"<li><em>Smart</em> vil prøve å få minst mulig overlapping av vinduer</li>"
"\n"
"<li><em>Maksimering</em> vil prøve å maksimere alle vinduer slik at de fyller hele skjermen. Det kan være nyttig å endre dette for enkeltvinduer ved å bruke innstillingene for enkeltvinduer.</li>"
" \n"
"<li><em>Kortstokk</em> vil legge vinduene som i en kabal </li>"
" \n"
"<li><em>Tilfeldig</em> vil bruke tilfeldige posisjoner</li>"
"\n"
"<li><em>Midtstilt</em> vil plassere vinduet i midten</li>"
"\n"
"<li><em>Hjørnet lengst opp til venstre</em> vil plassere vinduet øverst i venstre hjørne</li>"
"\n"
"<li><em>Under mus</em> vil plassere vinduet under musepekeren</li>"
msgid "When turned on, utility windows (tool windows, torn-off menus,...) of inactive applications will be hidden and will be shown only when the application becomes active. Note that applications have to mark the windows with the proper window type for this feature to work."
msgstr "Her kan du velge om verktøyvinduet (verktøypaletter, løse menyer, osv.) som hører til programmer som ikke er i bruk skal skjules og bare vises når programmet blir tatt i bruk. Legg merke til at programmene må markere vinduene med rett vindustype for at denne funksjonen skal virke."
-msgid "When turned on attempt to automatically detect when a newly opened window is related to an existing one and place them in the same window group."
-msgstr "Når dette er slått på forsøkes det å bestemme automatisk når et nylig åpnet vindu er relatert til et som er åpnet før, og plassere dem i samme vindusgruppe."
"<p>This option specifies how much KWin will try to prevent unwanted focus stealing caused by unexpected activation of new windows. (Note: This feature does not work with the <span style=\" font-style:italic;\">Focus under mouse</span> or <span style=\" font-style:italic;\">Focus strictly under mouse</span> focus policies.) </p>"
"<li style=\" margin-top:12px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-style:italic;\">None:</span> Prevention is turned off and new windows always become activated.</li>"
"<li style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-style:italic;\">Low:</span> Prevention is enabled; when some window does not have support for the underlying mechanism and KWin cannot reliably decide whether to activate the window or not, it will be activated. This setting may have both worse and better results than the medium level, depending on the applications.</li>"
"<li style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-style:italic;\">High:</span> New windows get activated only if no window is currently active or if they belong to the currently active application. This setting is probably not really usable when not using mouse focus policy.</li>"
"<li style=\" margin-top:0px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-style:italic;\">Extreme:</span> All windows must be explicitly activated by the user.</li>"
"</ul>"
"<p>Windows that are prevented from stealing focus are marked as demanding attention, which by default means their taskbar entry will be highlighted. This can be changed in the Notifications control module.</p>"
msgid "When this option is enabled, the active window will be brought to the front when you click somewhere into the window contents. To change it for inactive windows, you need to change the settings in the Actions tab."
msgstr "Når dette er slått på blir det aktive vinduet lagt øverst når du trykker et sted inni vinduet. For å endre dette for inaktive vinduer må du endre innstillingene i Handlinger-fanen."
msgid "When this option is enabled, a window in the background will automatically come to the front when the mouse pointer has been over it for some time."
msgstr "Hvis dette er slått på, vil et vindu som er i bakgrunnen automatisk komme fram når musepekeren har stått over det en stund."
msgid "When this option is enabled, the active Xinerama screen (where new windows appear, for example) is the screen containing the mouse pointer. When disabled, the active Xinerama screen is the screen containing the focused window. By default this option is disabled for Click to focus and enabled for other focus policies."
msgstr "Når dette alternativer er skrudd på, er den aktive Xinerama-skjermen ( der for eksempel et nytt vindu kommer til syne), den skjermen der musepekeren er. Når dette valget er slått av, er den aktive Xinerama-skjermen den skjermen som har et vindu i fokus. Dette alternativet er standardmessig slått av. for 'klikk for fokusering' og slått på for andre fokuseringspraksiser."
"<p>This option specifies how much KWin will try to prevent unwanted focus stealing caused by unexpected activation of new windows. (Note: This feature does not work with the Focus Under Mouse or Focus Strictly Under Mouse focus policies.)\n"
"<ul>\n"
"<li><em>None:</em> Prevention is turned off and new windows always become activated.</li>"
"\n"
"<li><em>Low:</em> Prevention is enabled; when some window does not have support for the underlying mechanism and KWin cannot reliably decide whether to activate the window or not, it will be activated. This setting may have both worse and better results than the medium level, depending on the applications.</li>"
"\n"
"<li><em>Medium:</em> Prevention is enabled.</li>"
"\n"
"<li><em>High:</em> New windows get activated only if no window is currently active or if they belong to the currently active application. This setting is probably not really usable when not using mouse focus policy.</li>"
"\n"
"<li><em>Extreme:</em> All windows must be explicitly activated by the user.</li>"
"\n"
"</ul>"
"</p>"
"\n"
"<p>Windows that are prevented from stealing focus are marked as demanding attention, which by default means their taskbar entry will be highlighted. This can be changed in the Notifications control module.</p>"
msgstr ""
"<p>Med denne funksjonen kan du velge hvor mye KWin skal prøve å hindre uønsket fokusstjeling fra vinduer som dukker opp uventet. (Legg merke til at denne funksjonen ikke fungerer med «Fokus under musa» og «Fokus strengt under musa».)"
"<ul>\n"
"<li><em>Ingen:</em> Tradisjonell oppførsel. Fokusstjeling blir ikke hindret, slik at nye vinduer alltid får fokus.</li>"
"\n"
"<li><em>Lav:</em> Hindring av fokusstjeling er slått på. Et vindu får fokus dersom det ikke støtter den underliggende mekanismen, slik at KWin ikke klarer å avgjøre om vinduet skal få fokus. Avhengig av programmene kan denne innstillinga gi dårligere eller bedre resultat enn middels-nivået.</li>"
" \n"
"<li><em>Middels:</em> Fokusstjeling blir hindret.</li>"
" \n"
"<li><em>Høy:</em> Nye vinduer får bare fokus dersom ingen andre vinduer er har det, eller dersom de hører til det programmet som har fokus (er i bruk). Denne innstillinga er trolig ikke særlig nyttig med mindre du bruker musa til fokusering.</li>"
"\n"
"<li><em>Ekstrem:</em> Alle vinduer må velges aktivt av brukeren.</li>"
"\n"
"</ul>"
" </p>"
" \n"
"<p>Vinduer som blir hindret i å stjele fokus vil vise at de påkaller oppmerksomheten. Det skjer vanligvis ved at de blir markert i oppgavelinja. Du kan endre på dette i kontrollmodulen «Varsel».</p>"
" Here you can customize the way windows behave when being moved, resized or clicked on. You can also specify a focus policy as well as a placement policy for new windows.</p>"
" "
"<p>Please note that this configuration will not take effect if you do not use KWin as your window manager. If you do use a different window manager, please refer to its documentation for how to customize window behavior.</p>"
msgstr ""
"<p>"
"<h1>Vinduoppførsel</h1>"
"Her kan du tilpasse måten vinduer oppfører seg når de flyttes, endrer størrelse og mottar museklikk.</p>"
"<p>Merk at dette oppsettet bare blir tatt i bruk når du bruker KWin som vindusbehandler. Hvis du bruker en annen vindusbehandler, så ta en titt på dokumentasjon for denne for å finne ut hvordan du endrer oppførselen til vinduene.</p>"
msgid "Enable this option if you want a window's geometry to be displayed while it is being moved or resized. The window position relative to the top-left corner of the screen is displayed together with its size."
msgstr "Bruk dette hvis du vil vise vinduets geometri når du beveger eller endrer størrelsen på vinduet. Sammen med størrelsen vises posisjonen relativt til vinduets øvre venstre hjørne."
#| msgid "Here you can set the snap zone for screen borders, i.e. the 'strength' of the magnetic field which will make windows snap to the border when moved near it."
msgid "Here you can set the snap zone for screen edges, i.e. the 'strength' of the magnetic field which will make windows snap to the border when moved near it."
msgstr "Her kan du sette opp gripesonen for skjermkanter, dvs. styrken på «magnetfeltet» som får vinduer til å legge seg inntil kanten når de blir flyttet i nærheten."
msgid "Here you can set the snap zone for screen borders, i.e. the 'strength' of the magnetic field which will make windows snap to the border when moved near it."
msgstr "Her kan du sette opp gripesonen for skjermkanter, dvs. styrken på «magnetfeltet» som får vinduer til å legge seg inntil kanten når de blir flyttet i nærheten."
msgid "Here you can set the snap zone for windows, i.e. the 'strength' of the magnetic field which will make windows snap to each other when they are moved near another window."
msgstr "Her kan du sette opp gripesonen for vinduer, dvs. styrken på «magnetfeltet» som gjør at et vindu klemmer seg inntil et annet når det flyttes i nærheten av det."
msgid "Here you can set the snap zone for the screen center, i.e. the 'strength' of the magnetic field which will make windows snap to the center of the screen when moved near it."
msgstr "Her kan du sette opp gripesonen for midten av skjermen, dvs. styrken på «magnetfeltet» som får vinduer til å legge seg midt på skjermen når de blir flyttet i nærheten."
msgid "Here you can set that windows will be only snapped if you try to overlap them, i.e. they will not be snapped if the windows comes only near another window or border."
msgstr "Her kan du bestemme at vinduer bare skal gripes dersom du forsøker å legge dem over hverandre. dvs. de gripes ikke dersom vinduene bare kommer nær et annet vindu eller skrivebordskanten."
"<p><span style=\" font-style:italic;\">Click to focus:</span> A window becomes active when you click into it. This behavior is common on other operating systems and likely what you want.</p>"
"</body></html>"
msgstr ""
#. +> trunk5
-#: windows.cpp:177
+#: windows.cpp:175
#, kde-format
msgid ""
"<html><head/><body>"
"<p><span style=\" font-style:italic;\">Click to focus (mouse precedence):</span> Mostly the same as <span style=\" font-style:italic;\">Click to focus</span>. If an active window has to be chosen by the system (eg. because the currently active one was closed) the window under the mouse is the preferred candidate. Unusual, but possible variant of <span style=\" font-style:italic;\">Click to focus</span>.</p>"
"</body></html>"
msgstr ""
#. +> trunk5
-#: windows.cpp:180
+#: windows.cpp:178
#, kde-format
msgid ""
"<html><head/><body>"
"<p><span style=\" font-style:italic;\">Focus follows mouse:</span> Moving the mouse onto a window will activate it. Eg. windows randomly appearing under the mouse will not gain the focus. <span style=\" font-style:italic;\">Focus stealing prevention</span> takes place as usual. Think as <span style=\" font-style:italic;\">Click to focus</span> just without having to actually click.</p>"
"</body></html>"
msgstr ""
#. +> trunk5
-#: windows.cpp:183
+#: windows.cpp:181
#, kde-format
msgid ""
"<html><head/><body>"
"<p>This is mostly the same as <span style=\" font-style:italic;\">Focus follows mouse</span>. If an active window has to be chosen by the system (eg. because the currently active one was closed) the window under the mouse is the preferred candidate. Choose this, if you want a hover controlled focus.</p>"
"</body></html>"
msgstr ""
#. +> trunk5
-#: windows.cpp:186
+#: windows.cpp:184
#, kde-format
msgid ""
"<html><head/><body>"
"<p><span style=\" font-style:italic;\">Focus under mouse:</span> The focus always remains on the window under the mouse.<br/>"
"<span style=\" font-weight:600;\">Warning: </span><span style=\" font-style:italic;\">Focus stealing prevention</span> and the <span style=\" font-style:italic;\">tabbox ('Alt+Tab') </span>contradict the activation policy and will not work. You very likely want to use <span style=\" font-style:italic;\">Focus follows mouse (mouse precedence)</span> instead!</p>"
"</body></html>"
msgstr ""
#. +> trunk5
-#: windows.cpp:189
+#: windows.cpp:187
#, kde-format
msgid ""
"<html><head/><body>"
"<p><span style=\" font-style:italic;\">Focus strictly under mouse:</span> The focus is always on the window under the mouse (in doubt nowhere) very much like the focus behavior in an unmanaged legacy X11 environment.<br/>"
"<span style=\" font-weight:600;\">Warning: </span><span style=\" font-style:italic;\">Focus stealing prevention</span> and the <span style=\" font-style:italic;\">tabbox ('Alt+Tab') </span>contradict the activation policy and will not work. You very likely want to use <span style=\" font-style:italic;\">Focus follows mouse (mouse precedence)</span> instead!</p>"
msgstr "fokus,plassering,autohev,hev,klikk-hev,tastatur,CDE,alt-tab,alle skrivebord,fokus følger mus,fokushindring,fokus-stjeling,fokuspraksis,fokusoppførsel for vinduer,vindusoppførsel på skjerm"
msgstr "fokus,plassering,autohev,hev,klikk-hev,tastatur,CDE,alt-tab,alle skrivebord,fokus følger mus,fokushindring,fokus-stjeling,fokuspraksis,fokusoppførsel for vinduer,vindusoppførsel på skjerm"
msgstr "kwin,vindusbehandler,sammensetting,effekt,3D-effekter,2D-effekter,OpenGL,XRender,videoinnstillinger,grafiske effekter,skrivebordseffekter,animasjoner,diverse animasjoner,vindusbytteeffekter,effekter ved skrivebordsbytte,animasjoner,animasjonsfart,skrivebordsanimasjoner,drivere,driverinnstillinger,opptegning,opptegner,inverteringseffekt,speileffekt,lupeeffekt,gripehjelpereffekt,musesporeffekt,forstørreeffekt,sløreffekt,kontrollpulteffekt,eksplosjonseffekt,uttoningseffekt,skrivebordtoningseffekt,henfallseffekt,glidereffekt,framhev vindu-effekt,innlogingseffekt,utloggingsefffekt,magisk lampe-effekt, animasjonseffekt ved vindusminimering,musmerkeeffekt,innskaleringseffekt,skjermdumpeffekt,ark-effekt,lysbildeeffekt,glidende oppspretteffekt,effekt for minibilder på oppgavelinja,effekt for minibilder på siden,gjennomskinnelighetseffekt,gjennomsiktighet,vindusgeometri-effekt,skjelvende vinduer-effekt,effekt for oppstartsmelding,effekt for foreldredialog,effekt for mørk inaktiv,effekt for mørk skjerm,gli tilbake-effekt,øyesnop,snop,vis FPS-effekt,vis malingseffekt,boksbytteeffekt,lokkbytteeffekt,skrivebordsterning-effekt,effekt for animert skrivebordsterning,effekt for skrivebordsruter,effekt for flipp-bytte,omriss-effekt,effekt for vinduer tilstede,effekt for vinduer som endrer størrelse"
msgid "Hostname on which the application is running"
msgstr "Vertsnavn der programmet kjører"
#. +> trunk5 stable5 plasma5lts
#: helpers/killer/killer.cpp:53
#, kde-format
msgid "hostname"
msgstr "vertsnavn"
#. +> trunk5 stable5 plasma5lts
#: helpers/killer/killer.cpp:55
#, kde-format
msgid "Caption of the window to be terminated"
msgstr "Overskrift på vinduet som skal stoppes"
#. +> trunk5 stable5 plasma5lts
#: helpers/killer/killer.cpp:55
#, kde-format
msgid "caption"
msgstr "overskrift"
#. +> trunk5 stable5 plasma5lts
#: helpers/killer/killer.cpp:57
#, kde-format
msgid "Name of the application to be terminated"
msgstr "Navn på programmet som skal stoppes"
#. +> trunk5 stable5 plasma5lts
#: helpers/killer/killer.cpp:57
#, kde-format
msgid "name"
msgstr "navn"
#. +> trunk5 stable5 plasma5lts
#: helpers/killer/killer.cpp:59
#, kde-format
msgid "ID of resource belonging to the application"
msgstr "ID for ressurs som tilhører programmet"
#. +> trunk5 stable5 plasma5lts
#: helpers/killer/killer.cpp:59
#, kde-format
msgid "id"
msgstr "id"
#. +> trunk5 stable5 plasma5lts
#: helpers/killer/killer.cpp:61
#, kde-format
msgid "Time of user action causing termination"
msgstr "Tid for brukerhandling som forårsaker stopp"
#. +> trunk5 stable5 plasma5lts
#: helpers/killer/killer.cpp:61
#, kde-format
msgid "time"
msgstr "tid"
#. +> trunk5 stable5 plasma5lts
#: helpers/killer/killer.cpp:63
#, kde-format
msgid "KWin helper utility"
msgstr "KWin hjelpeverktøy"
#. +> trunk5 stable5 plasma5lts
#: helpers/killer/killer.cpp:87
#, kde-format
msgid "This helper utility is not supposed to be called directly."
msgstr "Dette hjelpeverktøyet skal ikke kjøres direkte."
#. +> trunk5 stable5 plasma5lts
#: helpers/killer/killer.cpp:97
#, kde-format
msgctxt "@info"
msgid "<b>Application \"%1\" is not responding</b>"
msgstr "<b>Programmet «%1» svarer ikke</b>"
#. +> trunk5 stable5 plasma5lts
#: helpers/killer/killer.cpp:99
#, fuzzy, kde-kuit-format
#| msgctxt "@info"
#| msgid "<para>You tried to close window \"%1\" from application \"%2\" (Process ID: %3) but the application is not responding.</para>"
msgctxt "@info"
msgid "<p>You tried to close window \"%1\" from application \"%2\" (Process ID: %3) but the application is not responding.</p>"
msgstr "<para>Du forsøkte å lukke vinduet «%1» fra programmet «%2» (prosess-ID: %3) men programmet reagerer ikke.</para>"
#. +> trunk5 stable5 plasma5lts
#: helpers/killer/killer.cpp:101
#, fuzzy, kde-kuit-format
#| msgctxt "@info"
#| msgid "<para>You tried to close window \"%1\" from application \"%2\" (Process ID: %3), running on host \"%4\", but the application is not responding.</para>"
msgctxt "@info"
msgid "<p>You tried to close window \"%1\" from application \"%2\" (Process ID: %3), running on host \"%4\", but the application is not responding.</p>"
msgstr "<para>Du forsøkte å lukke vinduet «%1» fra programmet «%2» (prosess-ID: %3), som kjører på verten «%4», men programmet reagerer ikke.</para>"
#. +> trunk5 stable5 plasma5lts
#: helpers/killer/killer.cpp:104
#, fuzzy, kde-kuit-format
#| msgctxt "@info"
#| msgid ""
#| "<para>Do you want to terminate this application?</para>"
#| "<para><warning>Terminating the application will close all of its child windows. Any unsaved data will be lost.</warning></para>"
msgctxt "@info"
msgid ""
"<p>Do you want to terminate this application?</p>"
"<p><warning>Terminating the application will close all of its child windows. Any unsaved data will be lost.</warning></p>"
msgstr ""
"<para>Vil du avslutte dette programmet?</para>"
" "
"<para><warning>Når programmet avsluttes blir alle undervinduer lukket. Data som ikke er lagret vil bli tapt.</warning></para>"
msgctxt "Special entry in alt+tab list for minimizing all windows"
msgid "Show Desktop"
msgstr "Vis skrivebordet"
#. +> trunk5 stable5 plasma5lts
#: tabbox/tabbox.cpp:541
#, kde-format
msgid "Walk Through Windows"
msgstr "Bla gjennom vinduer"
#. +> trunk5 stable5 plasma5lts
#: tabbox/tabbox.cpp:542
#, kde-format
msgid "Walk Through Windows (Reverse)"
msgstr "Bla baklengs gjennom vinduer"
#. +> trunk5 stable5 plasma5lts
#: tabbox/tabbox.cpp:543
#, kde-format
msgid "Walk Through Windows Alternative"
msgstr "Bla gjennom vinduer på annen måte"
#. +> trunk5 stable5 plasma5lts
#: tabbox/tabbox.cpp:544
#, kde-format
msgid "Walk Through Windows Alternative (Reverse)"
msgstr "Bla gjennom vinduer på annen måte (baklengs)"
#. +> trunk5 stable5 plasma5lts
#: tabbox/tabbox.cpp:545
#, kde-format
msgid "Walk Through Windows of Current Application"
msgstr "Bla gjennom vinduer fra gjeldende program"
#. +> trunk5 stable5 plasma5lts
#: tabbox/tabbox.cpp:546
#, kde-format
msgid "Walk Through Windows of Current Application (Reverse)"
msgstr "Bla gjennom vinduer fra gjeldende program (baklengs)"
#. +> trunk5 stable5 plasma5lts
#: tabbox/tabbox.cpp:547
#, kde-format
msgid "Walk Through Windows of Current Application Alternative"
msgstr "Bla gjennom vinduer fra gjeldende program alternativt"
#. +> trunk5 stable5 plasma5lts
#: tabbox/tabbox.cpp:548
#, kde-format
msgid "Walk Through Windows of Current Application Alternative (Reverse)"
msgstr "Bla gjennom vinduer fra gjeldende program alternativt /baklengs)"
#. +> trunk5 stable5 plasma5lts
#: tabbox/tabbox.cpp:549
#, kde-format
msgid "Walk Through Desktops"
msgstr "Bla gjennom skrivebord"
#. +> trunk5 stable5 plasma5lts
#: tabbox/tabbox.cpp:550
#, kde-format
msgid "Walk Through Desktops (Reverse)"
msgstr "Bla baklengs gjennom skrivebord"
#. +> trunk5 stable5 plasma5lts
#: tabbox/tabbox.cpp:551
#, kde-format
msgid "Walk Through Desktop List"
msgstr "Bla gjennom skrivebordslista"
#. +> trunk5 stable5 plasma5lts
#: tabbox/tabbox.cpp:552
#, kde-format
msgid "Walk Through Desktop List (Reverse)"
msgstr "Bla baklengs gjennom skrivebordslista"
#. +> trunk5 stable5 plasma5lts
#: tabbox/tabboxhandler.cpp:283
#, kde-format
msgid ""
"The Window Switcher installation is broken, resources are missing.\n"
"Contact your distribution about this."
msgstr ""
"Vindusbytter-installasjonen er ødelagt, ressurser mangler.\n"
"Kontakt din distribusjon om dette."
#. +> trunk5 stable5 plasma5lts
-#: useractions.cpp:183
+#: useractions.cpp:179
#, kde-format
msgid ""
"You have selected to show a window without its border.\n"
"Without the border, you will not be able to enable the border again using the mouse: use the window operations menu instead, activated using the %1 keyboard shortcut."
msgstr ""
"Du har valgt å vise et vindu uten kanter.\n"
"Uten kantene får du ikke skrudd på kantene igjen ved hjelp av musa:bruk vindusmenyen isteden, den kan du skru på med snarveien %1."
#. +> trunk5 stable5 plasma5lts
-#: useractions.cpp:191
+#: useractions.cpp:187
#, kde-format
msgid ""
"You have selected to show a window in fullscreen mode.\n"
"If the application itself does not have an option to turn the fullscreen mode off you will not be able to disable it again using the mouse: use the window operations menu instead, activated using the %1 keyboard shortcut."
msgstr ""
"Du har valgt å vise et vindu i fullskjermmodus.\n"
"Hvis programmet i seg selv ikke har et valg for å skru fullskjermmodusen av, får du ikke gjort dette igjen med musa. Bruk vindusmenyen isteden, den kan du skru på med snarveien %1."
msgid "Whether to show the virtual keyboard on demand."
msgstr "Om bitredigeringen skal vises."
#. +> trunk5 stable5
-#: workspace.cpp:1351
+#: workspace.cpp:1348
#, fuzzy, kde-format
#| msgctxt "Introductory text shown in the support information."
#| msgid ""
#| "KWin Support Information:\n"
#| "The following information should be used when requesting support on e.g. http://forum.kde.org.\n"
#| "It provides information about the currently running instance, which options are used,\n"
#| "what OpenGL driver and which effects are running.\n"
#| "Please post the information provided underneath this introductory text to a paste bin service\n"
#| "like http://paste.kde.org instead of pasting into support threads.\n"
msgctxt "Introductory text shown in the support information."
msgid ""
"KWin Support Information:\n"
"The following information should be used when requesting support on e.g. https://forum.kde.org.\n"
"It provides information about the currently running instance, which options are used,\n"
"what OpenGL driver and which effects are running.\n"
"Please post the information provided underneath this introductory text to a paste bin service\n"
"like https://paste.kde.org instead of pasting into support threads.\n"
msgstr ""
"Informasjon om støtte for KWin:\n"
"Følgende opplysninger må brukes når du ber om hjelp på f.eks. http://forum.kde.org.\n"
"Det viser data om den instansen som kjører nå, hvilke valg som er satt opp, hvilken\n"
"OpenGL-driver og hvilke effekter som er i bruk.\n"
"Opplysningene under denne innledende teksten må limes inn i en pastebin-tjeneste,\n"
"f.eks. http://paste.kde.org og ikke limes inn i hjelpemeldingene.\n"
#. +> plasma5lts
#: workspace.cpp:1310
#, kde-format
msgctxt "Introductory text shown in the support information."
msgid ""
"KWin Support Information:\n"
"The following information should be used when requesting support on e.g. http://forum.kde.org.\n"
"It provides information about the currently running instance, which options are used,\n"
"what OpenGL driver and which effects are running.\n"
"Please post the information provided underneath this introductory text to a paste bin service\n"
"like http://paste.kde.org instead of pasting into support threads.\n"
msgstr ""
"Informasjon om støtte for KWin:\n"
"Følgende opplysninger må brukes når du ber om hjelp på f.eks. http://forum.kde.org.\n"
"Det viser data om den instansen som kjører nå, hvilke valg som er satt opp, hvilken\n"
"OpenGL-driver og hvilke effekter som er i bruk.\n"
"Opplysningene under denne innledende teksten må limes inn i en pastebin-tjeneste,\n"
"f.eks. http://paste.kde.org og ikke limes inn i hjelpemeldingene.\n"
#. +> plasma5lts
#: pointer_input.cpp:651
#, kde-format
msgctxt "notification about mouse pointer confined"
msgid ""
"Pointer motion confined to the current window.\n"
"To release pointer hold Escape for 3 seconds."
msgstr ""
#. +> plasma5lts
#: pointer_input.cpp:668
#, kde-format
msgctxt "notification about mouse pointer locked"
msgid ""
"Pointer locked to current position.\n"
"To end pointer lock hold Escape for 3 seconds."
msgstr ""
#~ msgid ""
#~ "<h1>OpenGL desktop effects not possible</h1>"
#~ "Your system cannot perform OpenGL Desktop Effects at the current resolution<br>"
#~ "<br>"
#~ "You can try to select the XRender backend, but it might be very slow for this resolution as well.<br>"
#~ "Alternatively, lower the combined resolution of all screens to %1x%2 "
#~ msgstr ""
#~ "<h1>OpenGL skrivebordseffekter er ikke mulige</h1>"
#~ " Systemet ditt kan ikke utføre OpenGL skrivebordseffekter ved gjeldende oppløsning<b><br>"
#~ " Du kan forsøke å velge XRender-motoren, men den kan også være svært langsom for denne oppløsningen.<br>"
#~ " Ellers kan du senke den kombinerte oppløsningen for alle skjermer til %1x%2 "
#~ msgid ""
#~ "The demanded resolution exceeds the GL_MAX_VIEWPORT_DIMS limitation of your GPU and is therefore not compatible with the OpenGL compositor.<br>"
#~ "XRender does not know such limitation, but the performance will usually be impacted by the hardware limitations that restrict the OpenGL viewport size."
#~ msgstr ""
#~ "Den oppløsningen som ønskes går ut over grensen GL_MAX_VIEWPORT_DIMS i den grafiske enheten (GPU) og passer derfor ikke sammen med OpenGL-sammensettingen.<br>"
#~ " XRender har ingen slik begrensning, men ytelsen vil bli påvirket av maskinvarebegrensningen som setter grense for størrelsen i OpenGLs visning."
#~ msgid ""
#~ "<h1>OpenGL desktop effects might be unusable</h1>"
#~ "OpenGL Desktop Effects at the current resolution are supported but might be exceptionally slow.<br>"
#~ "Also large windows will turn entirely black.<br>"
#~ "<br>"
#~ "Consider to suspend compositing, switch to the XRender backend or lower the resolution to %1x%1."
#~ msgstr ""
#~ "<h1>OpenGL skrivebordseffekter kan være ubrukelige</h1>"
#~ " Ved den gjeldende oppløsningen støttes OpenGL skrivebordseffekter, men kan være uvanlig langsomme.<br>"
#~ " Også, store vinduer vil bli helt svarte,<br>"
#~ " <br>"
#~ " Tenk på å slå av sammensetting, bytte til XRender-motoren eller senke oppløsningen til %1x%1."
#~ msgid ""
#~ "The demanded resolution exceeds the GL_MAX_TEXTURE_SIZE limitation of your GPU, thus windows of that size cannot be assigned to textures and will be entirely black.<br>"
#~ "Also this limit will often be a performance level barrier despite below GL_MAX_VIEWPORT_DIMS, because the driver might fall back to software rendering in this case."
#~ msgstr ""
#~ "Den oppløsningen som ønskes går ut over grensen GL_MAX_TEXTURE_SIZE i den grafiske enheten (GPU), så vinduer av den størrelsen kan ikke tilordnes til teksturer og vil være helt svarte.<br>"
#~ " Selv om størrelsen er mindre enn GL_MAX_VIEWPORT_DIMS kan denne grensen være et hinder for ytelsen, fordi driveren kan i dette tilfellet falle tilbake til programvare-opptegning."
+msgid "<b>Julia</b> is a high-level, high-performance dynamic programming language for technical computing, with syntax that is familiar to users of other technical computing environments. It provides a sophisticated compiler, distributed parallel execution, numerical accuracy, and an extensive mathematical function library."
+msgstr ""
+
+#. +> stable5
#: backends/julia/juliabackend.cpp:74
#, kde-format
msgid "<p><b>Julia</b> is a high-level, high-performance dynamic programming language for technical computing, with syntax that is familiar to users of other technical computing environments. It provides a sophisticated compiler, distributed parallel execution, numerical accuracy, and an extensive mathematical function library.</p>"
msgstr ""
#. +> trunk5 stable5
-#: backends/julia/juliabackend.cpp:87
+#: backends/julia/juliabackend.cpp:85
#, kde-format
msgctxt "The url to the documentation of Julia, please check if there is a translated version and use the correct url"
msgid "http://docs.julialang.org/en/latest/"
msgstr ""
-#. +> trunk5 stable5
+#. +> stable5
#: backends/julia/juliabackend.cpp:98
#, kde-format
msgid "You should set path to Julia executable"
msgstr ""
-#. +> trunk5 stable5
+#. +> trunk5
+#: backends/julia/juliabackend.cpp:101
+#, kde-format
+msgid "The path to Julia specified in the application settings must point directly to the executable. Symlinks are not allowed.Please provide the correct path in the application settings and try again."
+msgstr ""
+
+#. +> stable5
#: backends/julia/juliabackend.cpp:105
#, kde-format
msgid "Path to Julia should point directly to julia executable, symlink not allowed"
msgid "Сantor couldn’t determine the version of Julia for %1. Please specify the correct path to Julia executable (no symlinks allowed) and try again."
msgstr ""
#. +> trunk5 stable5
-#: backends/julia/juliabackend.cpp:140
+#: backends/julia/juliabackend.cpp:141
#, kde-format
msgid "You are trying to use Cantor with Julia v%1.%2.%3. This version of Cantor was compiled with the support of Julia v%4.%5.%6. Please point to this version of Julia or recompile Cantor using the version %1.%2.%3."
msgstr ""
#. i18n: ectx: label, entry (replPath), group (JuliaBackend)
msgid "Lua backend needs installed Lua programming language. The backend often automatically finds needed Lua binary file, but not in this case. Please, go to Cantor settings and set path to Lua executable."
msgstr ""
-#. +> trunk5 stable5
+#. +> trunk5
+#: backends/lua/luabackend.cpp:70
+#, kde-format
+msgid "<b>Lua</b> is a fast and lightweight scripting language, with a simple procedural syntax. There are several libraries in Lua aimed at math and science."
+msgstr ""
+
+#. +> stable5
#: backends/lua/luabackend.cpp:77
#, kde-format
msgid "In Lua backend settings a path to Lua binary file set as %1, but this file not executable. Are you sure, that this is correct path to Lua? Change this path in Cantor settings, if no."
msgstr ""
-#. +> trunk5 stable5
-#: backends/lua/luabackend.cpp:84
-#, fuzzy, kde-format
-#| msgctxt "the url to the documentation of Sage, please check if there is a translated version and use the correct url"
"<p> Lua is a fast and lightweight scripting language, with a simple procedural syntax. There are several libraries in Lua aimed at math and science.</p>"
"<p>This backend supports luajit 2.</p>"
msgstr ""
#. i18n: ectx: label, entry (Path), group (LuaBackend)
msgid "Maxima backend needs installed Maxima - a computer algebra system. The backend often automatically finds needed binary file, but not in this case. Please, go to Cantor settings and set path to Maxima executable"
msgstr ""
-#. +> trunk5 stable5
+#. +> stable5
#: backends/maxima/maximabackend.cpp:101
#, kde-format
msgid "In Maxima backend settings a path to maxima binary file set as %1, but this file not executable. Are you sure, that this is correct path to Maxima? Change this path in Cantor settings, if no."
msgstr ""
-#. +> trunk5 stable5
-#: backends/maxima/maximabackend.cpp:113
+#. +> trunk5
+#: backends/maxima/maximabackend.cpp:107
#, kde-format
-msgctxt "the url to the documentation of Maxima, please check if there is a translated version and use the correct url"
+msgid "<b>Maxima</b> is a system for the manipulation of symbolic and numerical expressions, including differentiation, integration, Taylor series, Laplace transforms, ordinary differential equations, systems of linear equations, polynomials, and sets, lists, vectors, matrices, and tensors. Maxima yields high precision numeric results by using exact fractions, arbitrary precision integers, and variable precision floating point numbers. Maxima can plot functions and data in two and three dimensions."
+msgstr ""
-#. +> trunk5 stable5
+#. +> stable5
#: backends/maxima/maximabackend.cpp:131
#, kde-format
msgid "Maxima is a system for the manipulation of symbolic and numerical expressions, including differentiation, integration, Taylor series, Laplace transforms, ordinary differential equations, systems of linear equations, polynomials, and sets, lists, vectors, matrices, and tensors. Maxima yields high precision numeric results by using exact fractions, arbitrary precision integers, and variable precision floating point numbers. Maxima can plot functions and data in two and three dimensions. "
msgstr "Maxima er et system for å behandle symbolske og numeriske uttrykk, deriblant derivering, integrering, Taylor-rekker, Laplace-transformasjoner, vanlige differensiallikninger, systemer av lineære likninger, polynomer, og mengder, lister, vektorer, matriser og tensorer. Maxima gir numeriske resultater med høy presisjon ved å bruke eksakte brøker, heltall med vilkårlig presisjon og flyttall med variabel presisjon. Maxima kan plotte funksjoner og data i to og tre dimensjoner, "
#. i18n: ectx: label, entry (Path), group (MaximaBackend)
#. +> trunk5 stable5
#: backends/maxima/maximabackend.kcfg:10
#, kde-format
msgid "Path to the Maxima executable"
msgstr "Sti til Maxima-programmet"
#. i18n: ectx: label, entry (localDoc), group (MaximaBackend)
#. +> trunk5 stable5
#: backends/maxima/maximabackend.kcfg:14
#, fuzzy, kde-format
#| msgid "Local Documentation"
msgid "Url to the local Maxima documentation"
msgstr "Lokal dokumentasjon"
#. +> trunk5 stable5
#: backends/maxima/maximaexpression.cpp:116
#, kde-format
msgid "Error: Too many */"
msgstr "Feil: For mange */"
#. +> trunk5 stable5
#: backends/maxima/maximaexpression.cpp:129
#, kde-format
msgid "Error: Too many /*"
msgstr "Feil: For mange /*"
#. +> trunk5 stable5
#: backends/maxima/maximaexpression.cpp:135
#, kde-format
msgid "Error: expected \" before ;"
msgstr "Feil: forventet \" før :"
#. +> trunk5 stable5
#: backends/maxima/maximaexpression.cpp:355
#, kde-format
msgid "Waiting for the plot result"
msgstr ""
#. +> trunk5 stable5
#: backends/maxima/maximaextensions.cpp:46
#, kde-format
msgid "Maxima batch file (*.mac)"
msgstr ""
#. +> trunk5 stable5
#: backends/maxima/maximasession.cpp:186
#, kde-format
msgid "Failed to start Maxima"
msgstr "Klarte ikke å starte Maxima"
#. +> trunk5 stable5
#: backends/maxima/maximasession.cpp:274
#, kde-format
msgid "Maxima crashed. restarting..."
msgstr "Maxima krasjet, starter om …"
#. +> trunk5 stable5
#: backends/maxima/maximasession.cpp:288
#, kde-format
msgid "Maxima crashed twice within a short time. Stopping to try starting"
msgstr "Maxima krasjet to ganger på kort tid. Stopper startforsøk"
msgid "Octave backend needs installed Octave programming language. The backend often automatically finds needed Octave binary file, but not in this case. Please, go to Cantor settings and set path to Octave binary file with command line interface (CLI)"
msgstr ""
#. +> trunk5 stable5
-#: backends/octave/octavebackend.cpp:85
-#, kde-format
-msgid "In Octave backend settings a path to Octave binary file set as %1, but this file not executable. Are you sure, that this is correct path to Octave? Change this path in Cantor settings, if no."
-msgstr ""
-
-#. +> trunk5 stable5
-#: backends/octave/octavebackend.cpp:97
+#: backends/octave/octavebackend.cpp:77
#, kde-format
msgctxt "the url to the documentation of Octave, please check if there is a translated version (currently Czech and Japanese) and use the correct url"
+#| "GNU Octave is a high-level language, primarily intended for numerical computations. <br/>"
+#| "It provides a convenient command line interface for solving linear and nonlinear problems numerically, and for performing other numerical experiments using a language that is mostly compatible with Matlab."
+msgid ""
+"<b>GNU Octave</b> is a high-level language, primarily intended for numerical computations. <br/>"
+"It provides a convenient command line interface for solving linear and nonlinear problems numerically, and for performing other numerical experiments using a language that is mostly compatible with Matlab."
+msgstr ""
+"GNU Octave er et høynivå-språk, mest ment for numeriske beregninger.<br/>"
+" Det har et praktisk kommandolinje-grensesnitt for å løse lineære og ikke-lineære oppgaver numerisk, og for å utføre andre numeriske eksperimenter ved bruk av et språk som for det meste er kompatibelt med Matlab."
+
+#. +> stable5
+#: backends/octave/octavebackend.cpp:85
+#, kde-format
+msgid "In Octave backend settings a path to Octave binary file set as %1, but this file not executable. Are you sure, that this is correct path to Octave? Change this path in Cantor settings, if no."
+msgstr ""
+
+#. +> stable5
#: backends/octave/octavebackend.cpp:102
#, kde-format
msgid ""
"GNU Octave is a high-level language, primarily intended for numerical computations. <br/>"
"It provides a convenient command line interface for solving linear and nonlinear problems numerically, and for performing other numerical experiments using a language that is mostly compatible with Matlab."
msgstr ""
"GNU Octave er et høynivå-språk, mest ment for numeriske beregninger.<br/>"
" Det har et praktisk kommandolinje-grensesnitt for å løse lineære og ikke-lineære oppgaver numerisk, og for å utføre andre numeriske eksperimenter ved bruk av et språk som for det meste er kompatibelt med Matlab."
#. i18n: ectx: label, entry (Path), group (OctaveBackend)
#. +> trunk5 stable5
#: backends/octave/octavebackend.kcfg:10
#, kde-format
msgid "Path to the Octave executable"
msgstr "Sti til Octave-programmet"
#. i18n: ectx: label, entry (localDoc), group (SageBackend)
#. i18n: ectx: label, entry (localDoc), group (OctaveBackend)
msgid "Communication with Cantor python server failed for unknown reasons."
msgstr ""
-#. +> trunk5 stable5
+#. +> trunk5
+#: backends/python2/python2backend.cpp:74
+#, fuzzy, kde-format
+#| msgctxt "the url to the documentation Python 2"
+#| msgid "http://docs.python.org/2/"
+msgctxt "The url to the documentation Python 2"
+msgid "http://docs.python.org/2/"
+msgstr "http://docs.python.org/2/"
+
+#. +> stable5
#: backends/python2/python2backend.cpp:77
#, kde-format
msgctxt "the url to the documentation Python 2"
msgid "http://docs.python.org/2/"
msgstr "http://docs.python.org/2/"
-#. +> trunk5 stable5
+#. +> trunk5
+#: backends/python2/python2backend.cpp:79
+#, kde-format
+msgid "<b>Python</b> is a remarkably powerful dynamic programming language that is used in a wide variety of application domains. There are several Python packages to scientific programming. This backend supports Python 2."
+msgstr ""
+
+#. +> stable5
#: backends/python2/python2backend.cpp:82
#, kde-format
msgid ""
"<p>Python is a remarkably powerful dynamic programming language that is used in a wide variety of application domains. There are several Python packages to scientific programming.</p>"
"<p>This backend supports Python 2.</p>"
msgstr ""
"<p>Python er et usedvanlig slagkraftig dynamisk programmeringsspråk som er tatt i bruk i svært varierende bruksområder. Mange Python-pakker brukes i vitenskapelig programmering.</p>"
" "
"<p>Denne bakgrunnsmotoren støtter Python 2.</p>"
#. i18n: ectx: label, entry (localDoc), group (Python2Backend)
#. i18n: ectx: label, entry (localDoc), group (Python3Backend)
#. +> trunk5 stable5
#: backends/python2/python2backend.kcfg:9
#: backends/python3/python3backend.kcfg:9
#, kde-format
msgid "Url to the local Python documentation"
msgstr ""
-#. +> trunk5 stable5
+#. +> trunk5
+#: backends/python3/python3backend.cpp:70
+#, fuzzy, kde-format
+#| msgctxt "the url to the documentation Python 2"
+#| msgid "http://docs.python.org/2/"
+msgctxt "The url to the documentation Python 3"
+msgid "http://docs.python.org/3/"
+msgstr "http://docs.python.org/2/"
+
+#. +> stable5
#: backends/python3/python3backend.cpp:70
#, fuzzy, kde-format
#| msgctxt "the url to the documentation Python 2"
#| msgid "http://docs.python.org/2/"
msgctxt "the url to the documentation Python 3"
msgid "http://docs.python.org/3/"
msgstr "http://docs.python.org/2/"
-#. +> trunk5 stable5
+#. +> trunk5
+#: backends/python3/python3backend.cpp:75
+#, kde-format
+msgid "<b>Python</b> is a remarkably powerful dynamic programming language that is used in a wide variety of application domains. There are several Python packages to scientific programming. This backend supports Python 3."
+msgstr ""
+
+#. +> stable5
#: backends/python3/python3backend.cpp:75
#, fuzzy, kde-format
#| msgid ""
#| "<p>Python is a remarkably powerful dynamic programming language that is used in a wide variety of application domains. There are several Python packages to scientific programming.</p>"
#| "<p>This backend supports Python 2.</p>"
msgid ""
"<p>Python is a remarkably powerful dynamic programming language that is used in a wide variety of application domains. There are several Python packages to scientific programming.</p>"
"<p>This backend supports Python 3.</p>"
msgstr ""
"<p>Python er et usedvanlig slagkraftig dynamisk programmeringsspråk som er tatt i bruk i svært varierende bruksområder. Mange Python-pakker brukes i vitenskapelig programmering.</p>"
+#| msgid "Qalculate! is not your regular software replication of the cheapest available calculator. Qalculate! aims to make full use of the superior interface, power and flexibility of modern computers. The center of attention in Qalculate! is the expression entry. Instead of entering each number in a mathematical expression separately, you can directly write the whole expression and later modify it. The interpretation of expressions is flexible and fault tolerant, and if you nevertheless do something wrong, Qalculate! will tell you so. Not fully solvable expressions are however not errors. Qalculate! will simplify as far as it can and answer with an expression. In addition to numbers and arithmetic operators, an expression may contain any combination of variables, units, and functions."
+msgid "<b>Qalculate!</b> is not your regular software replication of the cheapest available calculator. Qalculate! aims to make full use of the superior interface, power and flexibility of modern computers. The center of attention in Qalculate! is the expression entry. Instead of entering each number in a mathematical expression separately, you can directly write the whole expression and later modify it. The interpretation of expressions is flexible and fault tolerant, and if you nevertheless do something wrong, Qalculate! will tell you so. Not fully solvable expressions are however not errors. Qalculate! will simplify as far as it can and answer with an expression. In addition to numbers and arithmetic operators, an expression may contain any combination of variables, units, and functions."
+msgstr "Qalculate! er ikke en vanlig programvarekopi av den billigste kalkulator som er å få. Qalculate! vil gjøre full bruk av moderne datamaskiners kraft, fleksibilitet og overlegne brukerflate. Hovedvekten i Qalculate! er på inntasting av uttrykk. I stedet for å taste inn for seg hvert tall i et matematisk uttrykk kan du skrive inn hele uttrykket, og endre det siden. Uttrykkstolkingen er fleksibel og feiltolerant, og hvis du likevel gjør noe som er feil, så vil Qalculate! si fra om det. Uttrykk som ikke kan regnes ut fullstendig er likevel ikke feil. Qalculate! vil forenkle så mye det kan og svare med et uttrykk. Foruten tall og regneoperatorer kan et uttrykk inneholde vilkårlig kombinasjon av variabler, enheter og funksjoner."
+
+#. +> stable5
#: backends/qalculate/qalculatebackend.cpp:69
#, kde-format
msgid "Qalculate! is not your regular software replication of the cheapest available calculator. Qalculate! aims to make full use of the superior interface, power and flexibility of modern computers. The center of attention in Qalculate! is the expression entry. Instead of entering each number in a mathematical expression separately, you can directly write the whole expression and later modify it. The interpretation of expressions is flexible and fault tolerant, and if you nevertheless do something wrong, Qalculate! will tell you so. Not fully solvable expressions are however not errors. Qalculate! will simplify as far as it can and answer with an expression. In addition to numbers and arithmetic operators, an expression may contain any combination of variables, units, and functions."
msgstr "Qalculate! er ikke en vanlig programvarekopi av den billigste kalkulator som er å få. Qalculate! vil gjøre full bruk av moderne datamaskiners kraft, fleksibilitet og overlegne brukerflate. Hovedvekten i Qalculate! er på inntasting av uttrykk. I stedet for å taste inn for seg hvert tall i et matematisk uttrykk kan du skrive inn hele uttrykket, og endre det siden. Uttrykkstolkingen er fleksibel og feiltolerant, og hvis du likevel gjør noe som er feil, så vil Qalculate! si fra om det. Uttrykk som ikke kan regnes ut fullstendig er likevel ikke feil. Qalculate! vil forenkle så mye det kan og svare med et uttrykk. Foruten tall og regneoperatorer kan et uttrykk inneholde vilkårlig kombinasjon av variabler, enheter og funksjoner."
#. i18n: ectx: label, entry (postConversion), group (QalculateBackend)
#. +> trunk5 stable5
#: backends/qalculate/qalculatebackend.kcfg:9
#, kde-format
msgid "If and how units will be automatically converted. If true, convert to the best suited SI units (the least amount of units)."
msgstr "Om og hvordan enheter skal gjøres om automatisk. Hvis det er sant, gjør om til mest passende SI-enheter (minste antall enheter)."
#. i18n: ectx: label, entry (angleUnit), group (QalculateBackend)
#. +> trunk5 stable5
#: backends/qalculate/qalculatebackend.kcfg:13
#, kde-format
msgid "Default angle unit for trigonometric functions."
msgstr "Standard vinkelenhet for trigonometriske funksjoner."
#. i18n: ectx: label, entry (base), group (QalculateBackend)
#. +> trunk5 stable5
#: backends/qalculate/qalculatebackend.kcfg:23
#, kde-format
msgid "Base of parsed and evaluated numbers."
msgstr "Grunntall for tall som tolkes og regnes ut."
#. i18n: ectx: label, entry (structuring), group (QalculateBackend)
#. +> trunk5 stable5
#: backends/qalculate/qalculatebackend.kcfg:32
#, kde-format
msgid "If the evaluation result will be simplified or factorized."
msgstr "Om resultatet av utregningen skal forenkles eller faktoriseres."
#. i18n: ectx: label, entry (fractionFormat), group (QalculateBackend)
#. +> trunk5 stable5
#: backends/qalculate/qalculatebackend.kcfg:42
#, kde-format
msgid "If rational numbers will be displayed with decimals, as a fraction, or something in between."
msgstr "Om rasjonale tall skal vises med desimaler, som brøk. eller en mellomting."
#. i18n: ectx: label, entry (indicateInfiniteSeries), group (QalculateBackend)
#. +> trunk5 stable5
#: backends/qalculate/qalculatebackend.kcfg:46
#, kde-format
msgid "Show that the digit series of a number continues forever with three dots, instead of rounding (ex. 2/3 displays as 0.666666... instead of 0.666667)."
msgstr "Vis at de gjentatte sifrene i et tall fortsetter for alltid med tre prikker, i stedet for å runde av (eks. 2/3 vises som 0.666666… i stedet for 0.666667)."
#. i18n: ectx: label, entry (useAllPrefixes), group (QalculateBackend)
#. +> trunk5 stable5
#: backends/qalculate/qalculatebackend.kcfg:50
#, kde-format
msgid "Use all decimal SI prefixes. If false, prefixes which is not a multiple of thousand (centi, deci, deca, hecto) will not be used automatically."
msgstr "Bruk alle desimale SI-prefikser. Hvis dette er slått av blir prefikser som ikke er multipler av tusen ikke brukt automatisk (centi, desi, deka, hekto)."
#. i18n: ectx: label, entry (negativeExponents), group (QalculateBackend)
#. +> trunk5 stable5
#: backends/qalculate/qalculatebackend.kcfg:54
#, kde-format
msgid "If true, negative exponents will be used instead of division (ex. 5/x^2 becomes 5*x^-2)."
msgstr "Hvis dette er sant blir det brukt negative eksponenter i stedet for divisjon (eks. 5/x^2 blir 5*x^-2)."
#. i18n: ectx: label, entry (minExp), group (QalculateBackend)
#. +> trunk5 stable5
#: backends/qalculate/qalculatebackend.kcfg:64
#, kde-format
msgid "Numerical display."
msgstr "Numerisk visning"
#. i18n: ectx: label, entry (inlinePlot), group (QalculateBackend)
#. +> trunk5 stable5
#: backends/qalculate/qalculatebackend.kcfg:68
#, kde-format
msgid "If true, plots will be displayed inside the worksheet. If not they appear in a separate window."
msgstr "Hvis dette er sant blir plott vist inne i arbeidsarket, ellers vises det i separate vinduer."
#. i18n: ectx: label, entry (coloredPlot), group (QalculateBackend)
#. +> trunk5 stable5
#: backends/qalculate/qalculatebackend.kcfg:72
#, kde-format
msgid "Whether colors should be used in plots."
msgstr "Om farger skal brukes i plott."
#. i18n: ectx: label, entry (plotGrid), group (QalculateBackend)
#. +> trunk5 stable5
#: backends/qalculate/qalculatebackend.kcfg:76
#, kde-format
msgid "Whether a grid should be plotted."
msgstr "Om rutenett skal plottes."
#. i18n: ectx: label, entry (plotBorder), group (QalculateBackend)
#. +> trunk5 stable5
#: backends/qalculate/qalculatebackend.kcfg:80
#, kde-format
msgid "Whether full borders should be drawn around the plot."
msgstr "Om heltrukne kanter skal tegnes rundt plottet."
#. i18n: ectx: label, entry (plotLineWidth), group (QalculateBackend)
#. +> trunk5 stable5
#: backends/qalculate/qalculatebackend.kcfg:84
#, kde-format
msgid "Width of lines, in pixels."
msgstr "Linjebredde, i piksler."
#. i18n: ectx: label, entry (plotSteps), group (QalculateBackend)
#. +> trunk5 stable5
#: backends/qalculate/qalculatebackend.kcfg:88
#, kde-format
msgid "Number of interpolation steps to be used in plotting."
msgstr "Antall interpoleringssteg som skal brukes i plotting."
#. i18n: ectx: label, entry (plotSmoothing), group (QalculateBackend)
#. +> trunk5 stable5
#: backends/qalculate/qalculatebackend.kcfg:99
#, kde-format
msgid "Smoothing mode in plots."
msgstr "Utjevningsmodus brukt i plott."
#. i18n: ectx: label, entry (plotStyle), group (QalculateBackend)
#. +> trunk5 stable5
#: backends/qalculate/qalculatebackend.kcfg:113
#, kde-format
msgid "Style of plots."
msgstr "Stil for plott."
#. i18n: ectx: label, entry (plotLegend), group (QalculateBackend)
#. +> trunk5 stable5
#: backends/qalculate/qalculatebackend.kcfg:126
#, kde-format
msgid "Legend position in plots."
msgstr "Posisjon for beskrivelse i plott."
#. +> trunk5 stable5
#: backends/qalculate/qalculateexpression.cpp:157
#, kde-format
msgid "Qalculate reports it cannot print. Is gnuplot installed?"
msgstr "Qalculate melder at det ikke klarer å skrive ut. Er gnuplot installert?"
#. +> trunk5 stable5
#: backends/qalculate/qalculateexpression.cpp:178
#, kde-format
msgid "missing %1"
msgstr "mangler %1"
#. +> trunk5 stable5
#: backends/qalculate/qalculateexpression.cpp:268
#, kde-format
msgid "%1 must be a number."
msgstr "%1 må være et tall."
#. +> trunk5 stable5
#: backends/qalculate/qalculateexpression.cpp:269
#, kde-format
msgid "%1 must be a integer."
msgstr "%1 må være et heltall."
#. +> trunk5 stable5
#: backends/qalculate/qalculateexpression.cpp:270
#, kde-format
msgid "%1 must be a boolean."
msgstr "%1 må være boolsk."
#. +> trunk5 stable5
#: backends/qalculate/qalculateexpression.cpp:271
#, kde-format
msgid "invalid option for %1: %2"
msgstr "ugyldig valg for %1: %2"
#. +> trunk5 stable5
#: backends/qalculate/qalculateexpression.cpp:598
#, kde-format
msgid "found multiple expressions in one plot command (%1 and %2)."
msgstr "fant flere uttrykk i én plottekommando (%1 og %2)."
msgid "Where the plot legend shall be placed. One of none, top_left, top_right, bottom_left, bottom_right, below, outside"
msgstr "Hvor forklaringen skal plasseres på plottet. En av ingen. øverst til venstre, øverst til høyre, nederst til venstre, nederst til høyre, under, utenfor"
+#| "R is a language and environment for statistical computing and graphics, similar to the S language and environment. <br/>"
+#| "It provides a wide variety of statistical (linear and nonlinear modelling, classical statistical tests, time-series analysis, classification, clustering, ...) and graphical techniques, and is highly extensible. The S language is often the vehicle of choice for research in statistical methodology, and R provides an Open Source route to participation in that activity."
+msgid ""
+"<b>R</b> is a language and environment for statistical computing and graphics, similar to the S language and environment. <br/>"
+"It provides a wide variety of statistical (linear and nonlinear modelling, classical statistical tests, time-series analysis, classification, clustering, ...) and graphical techniques, and is highly extensible. The S language is often the vehicle of choice for research in statistical methodology, and R provides an Open Source route to participation in that activity."
+msgstr ""
+"R er et språk og et miljø for statistiske beregninger og grafer, som likner på S-språket og miljøet.<br />"
+" Det tilbyr et bredt spekter av statistiske og grafiske teknikker (lineær og ikke-lineær modellering, klassiske statistiske tester, klassifisering, klynger …) og kan lett utvides. Forskning i statistiske metoder bruker ofte S som foretrukket språk, og R gir en mulighet til å delta i dette med fri programvare."
+
+#. +> stable5
#: backends/R/rbackend.cpp:116
#, kde-format
msgid ""
"R is a language and environment for statistical computing and graphics, similar to the S language and environment. <br/>"
"It provides a wide variety of statistical (linear and nonlinear modelling, classical statistical tests, time-series analysis, classification, clustering, ...) and graphical techniques, and is highly extensible. The S language is often the vehicle of choice for research in statistical methodology, and R provides an Open Source route to participation in that activity."
msgstr ""
"R er et språk og et miljø for statistiske beregninger og grafer, som likner på S-språket og miljøet.<br />"
" Det tilbyr et bredt spekter av statistiske og grafiske teknikker (lineær og ikke-lineær modellering, klassiske statistiske tester, klassifisering, klynger …) og kan lett utvides. Forskning i statistiske metoder bruker ofte S som foretrukket språk, og R gir en mulighet til å delta i dette med fri programvare."
#. i18n: ectx: label, entry (localDoc), group (RBackend)
#. +> trunk5 stable5
#: backends/R/rserver/rserver.kcfg:9
#, fuzzy, kde-format
#| msgid "Local Documentation"
msgid "Url to the local R documentation"
msgstr "Lokal dokumentasjon"
#. +> trunk5 stable5
#: backends/R/rsettingswidget.cpp:33
#, kde-format
msgid "Double click to open file selection dialog"
msgstr "Dobbelttrykk for å åpne filvelgerdialogen"
#. +> trunk5 stable5
#: backends/R/rsettingswidget.cpp:53
#, kde-format
msgid "*.R *.r|R source files (*.R, *.r)"
msgstr "*.R *.r|R-kildefiler (*.R, *.r)"
-#. +> trunk5 stable5
+#. +> stable5
#: backends/sage/sagebackend.cpp:84
#, kde-format
msgid "Sage backend needs installed Sage programming language. The backend often automatically finds needed Sage binary file, but not in this case. Please, go to Cantor settings and set path to Sage executable"
msgstr ""
#. +> trunk5 stable5
#: backends/sage/sagebackend.cpp:94
#, kde-format
-msgid "In Sage backend settings a path to Sage binary file set as %1, but this file not executable. Are you sure, that this is correct path to Sage? Change this path in Cantor settings, if no."
-msgstr ""
-
-#. +> trunk5 stable5
-#: backends/sage/sagebackend.cpp:119
-#, kde-format
msgctxt "the url to the documentation of Sage, please check if there is a translated version and use the correct url"
+msgid "In Sage backend settings a path to Sage binary file set as %1, but this file not executable. Are you sure, that this is correct path to Sage? Change this path in Cantor settings, if no."
+msgstr ""
+
+#. +> trunk5
+#: backends/sage/sagebackend.cpp:99
+#, fuzzy, kde-format
+#| msgid ""
+#| "Sage is a free open-source mathematics software system licensed under the GPL. <br/>"
+#| "It combines the power of many existing open-source packages into a common Python-based interface."
+msgid ""
+"<b>Sage</b> is a free open-source mathematics software system licensed under the GPL. <br/>"
+"It combines the power of many existing open-source packages into a common Python-based interface."
+msgstr ""
+"Sage er et fritt og åpent programsystem for matematikk, lisensiert med GPL.<br />"
+"Det binder sammen slagkraften i mange eksisterende friprog-pakker med et felles Python-basert grensesnitt."
+
+#. +> stable5
+#: backends/sage/sagebackend.cpp:120
#, kde-format
msgid ""
"Sage is a free open-source mathematics software system licensed under the GPL. <br/>"
"It combines the power of many existing open-source packages into a common Python-based interface."
msgstr ""
"Sage er et fritt og åpent programsystem for matematikk, lisensiert med GPL.<br />"
"Det binder sammen slagkraften i mange eksisterende friprog-pakker med et felles Python-basert grensesnitt."
#. i18n: ectx: label, entry (Path), group (SageBackend)
msgid "Scilab backend needs installed Scilab programming language. The backend often automatically finds needed Scilab binary file, but not in this case. Please, go to Cantor settings and set path to Scilab executable"
msgstr ""
-#. +> trunk5 stable5
-#: backends/scilab/scilabbackend.cpp:90
-#, kde-format
-msgid "In Scilab backend settings a path to Scilab binary file set as %1, but this file not executable. Are you sure, that this is correct path to Scilab? Change this path in Cantor settings, if no."
-msgstr ""
+#. +> trunk5
+#: backends/scilab/scilabbackend.cpp:85
+#, fuzzy, kde-format
+#| msgctxt "the url to the documentation of Scilab, please check if there is a translated version and use the correct url"
+#| "<p><b>Warning:</b> this backend works only with Scilab version 5.5 or later</p>"
+#| "<p>Scilab is a free software, cross-platform numerical computational package and a high-level, numerically oriented programming language.</p>"
+#| "Scilab is distributed under CeCILL license (GPL compatible)"
+msgid "<b>Scilab</b> is a free software, cross-platform numerical computational package and a high-level, numerically oriented programming language.Scilab is distributed under CeCILL license (GPL compatible)."
+msgstr ""
+"<p><b>Advarsel:</b> denne bakgrunnsmotoren virker bare med Scilab versjon 5.5 eller senere,</p>"
+" "
+"<p> Scilab er en programpakke for numeriske beregninger, med fri programvare for flere plattformer, og også et høynivå programmeringsspråk for numeriske beregninger.</p>"
+" Scilab utgis under CeCILL-lisensen (GPL-kompatibel)"
+
+#. +> stable5
+#: backends/scilab/scilabbackend.cpp:90
+#, kde-format
+msgid "In Scilab backend settings a path to Scilab binary file set as %1, but this file not executable. Are you sure, that this is correct path to Scilab? Change this path in Cantor settings, if no."
+msgstr ""
+
+#. +> stable5
#: backends/scilab/scilabbackend.cpp:116
#, fuzzy, kde-format
#| msgid ""
#| "<p><b>Warning:</b> this backend works only with Scilab version 5.5 or later</p>"
#| "<p>Scilab is a free software, cross-platform numerical computational package and a high-level, numerically oriented programming language.</p>"
#| "Scilab is distributed under CeCILL license (GPL compatible)"
msgid ""
"<p>Scilab is a free software, cross-platform numerical computational package and a high-level, numerically oriented programming language.</p>"
"Scilab is distributed under CeCILL license (GPL compatible)"
msgstr ""
"<p><b>Advarsel:</b> denne bakgrunnsmotoren virker bare med Scilab versjon 5.5 eller senere,</p>"
" "
"<p> Scilab er en programpakke for numeriske beregninger, med fri programvare for flere plattformer, og også et høynivå programmeringsspråk for numeriske beregninger.</p>"
" Scilab utgis under CeCILL-lisensen (GPL-kompatibel)"
#. i18n: ectx: label, entry (Path), group (ScilabBackend)
#. +> trunk5 stable5
#: backends/scilab/scilabbackend.kcfg:10
#, kde-format
msgid "Path to scilab-adv-cli command (Warning: Scilab version must better or equal than 5.4 version)"
msgstr "Sti til kommandoen scilab-adv-cli. Advarsel: Scilab-versjonen må være 5.4 eller bedre."
#. +> trunk5 stable5
#: backends/scilab/scilabextensions.cpp:38
#, kde-format
msgid ";;Scilab script file (*.sce);;Scilab function file (*.sci)"
msgid "Draw the points starting with the highest frequency first."
msgstr ""
#. +> trunk5
#: data/effects/audiospectrum.xml:45
#, fuzzy, kde-format
#| msgid "Line Extensions"
msgid "Line Tension"
msgstr "Linjeutvidelser"
#. +> trunk5
#: data/effects/audiospectrum.xml:46
#, kde-format
msgid "Affects the amount of curve in the line interpolating between points. 0.0 = a straight line between points. 100 = very curved lines between points. Values < 0 and > 100 will cause loops in the lines. Only applies to line graph type."
msgstr ""
#. +> trunk5
#: data/effects/audiospectrum.xml:49
#, fuzzy, kde-format
msgid "Points"
msgstr "Punkter"
#. +> trunk5
#: data/effects/audiospectrum.xml:50
#, kde-format
msgid "The number of bands to draw in the spectrum. Each band shows up as a data point in the graph."
msgstr ""
#. +> trunk5
#: data/effects/audiospectrum.xml:53
#, fuzzy, kde-format
msgid "Low Frequency"
msgstr "Frekvens"
#. +> trunk5
#: data/effects/audiospectrum.xml:54
#, kde-format
msgid "The low end of the frequency range to be used for the graph."
msgstr ""
#. +> trunk5
#: data/effects/audiospectrum.xml:57
#, fuzzy, kde-format
msgid "High Frequency"
msgstr "Frekvens"
#. +> trunk5
#: data/effects/audiospectrum.xml:58
#, kde-format
msgid "The high end of the frequency range to be used for the graph."
msgstr ""
#. +> trunk5
#: data/effects/audiospectrum.xml:61
#, fuzzy, kde-format
msgid "Level Threshold"
msgstr "Terskel"
#. +> trunk5
#: data/effects/audiospectrum.xml:62
#, kde-format
msgid "The minimum amplitude of sound that must occur within the frequency range to cause the value to be applied."
msgstr ""
#. +> trunk5
#: data/effects/audiospectrum.xml:65
#, fuzzy, kde-format
#| msgid "&Window Size"
msgid "Window Size"
msgstr "&Vindustørrelse"
#. +> trunk5
#: data/effects/audiospectrum.xml:66
#, kde-format
msgid "The number of samples that the FFT will be performed on. If window size is less than the number of samples in a frame, extra samples will be ignored. If window size is more than the number of samples in a frame, samples will be buffered from previous frames to fill the window. The buffering is performed as a sliding window so that the most recent samples are always transformed."
msgstr ""
#. +> trunk5 stable5
#: data/effects/audiowave.xml:3
#, kde-format
msgid "Audio Wave"
msgstr "Lydbølge"
#. +> trunk5 stable5
#: data/effects/audiowave.xml:4
#, kde-format
msgid "Display the audio waveform instead of the video"
" <full><![CDATA[This effect allows to do Light Painting (i.e. painting with light sources on a photo by keeping the shutter\n"
" opened for a while), but for video.]]></full>"
msgstr ""
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:10
#: data/effects/frei0r_lightgraffiti.xml:83
#, fuzzy, kde-format
msgid "Brightness Threshold"
msgstr "Lysstyrke"
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:12
#: data/effects/frei0r_lightgraffiti.xml:85
#, kde-format
msgid ""
"<![CDATA[How bright (<code>R+G+B</code>) does a pixel need to be in order to be recognized as a light source?<br/>"
"\n"
" Increasing this threshold requires brighter light sources (i.e. more white or less color, respectively) but prevents some «false alarms» where semi-bright parts, e.g. hands where colors can change quite a lot compared to the background, are incorrectly recognized as light source.]]>"
msgstr ""
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:15
#: data/effects/frei0r_lightgraffiti.xml:88
#, kde-format
msgid "Difference Threshold"
msgstr ""
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:17
#: data/effects/frei0r_lightgraffiti.xml:90
#, kde-format
msgid ""
"<![CDATA[How much does the strongest color channel of a pixel have to change, compared to the background image (<code>max(dR, dG, dB)</code>), in order to be recognized as light source? <br/>"
"\n"
" Increasing this threshold makes it harder for light sources to be accepted on bright backgrounds, but decreases the danger of noise or generally bright spots counting as light source.]]>"
msgstr ""
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:20
#: data/effects/frei0r_lightgraffiti.xml:93
#, kde-format
msgid "Difference Sum Threshold"
msgstr ""
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:22
#: data/effects/frei0r_lightgraffiti.xml:95
#, kde-format
msgid ""
"<![CDATA[How much does the sum of all color channels <em>relative to the background image</em> (<code>dR + dG + dB</code>) have to change until a pixel is recognized as a light source?<br/>"
"\n"
" Raising this value might, in some cases, avoid that some light objects lit by the light source are added to the light mask.]]>"
msgstr ""
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:25
#: data/effects/frei0r_lightgraffiti.xml:98
#, fuzzy, kde-format
msgid "Sensitivity"
msgstr "Følsomhet"
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:27
#: data/effects/frei0r_lightgraffiti.xml:100
#, kde-format
msgid ""
"<![CDATA[Light sensitivity.<br/>"
"\n"
" For slowly moving light source try to use a lower sensitivity to obtain a better exposure.]]>"
msgstr ""
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:30
#: data/effects/frei0r_lightgraffiti.xml:103
#, fuzzy, kde-format
#| msgid "Detect Overexposure"
msgid "Lower Overexposure"
msgstr "Oppdag overeksponering"
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:32
#: data/effects/frei0r_lightgraffiti.xml:105
#, kde-format
msgid ""
"<![CDATA[Lowers overexposure.<br/>"
"\n"
" The light mask does not get white immediately when the light source is moving slowly or staying steady.]]>"
msgstr ""
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:35
#: data/effects/frei0r_lightgraffiti.xml:108
#, fuzzy, kde-format
#| msgid "timing"
msgid "Dimming"
msgstr "tidtaking"
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:36
#: data/effects/frei0r_lightgraffiti.xml:109
#, kde-format
msgid "Dims the light mask. Lights will leave a fainting trail if it is set to a value > 0."
msgstr ""
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:39
#: data/effects/frei0r_lightgraffiti.xml:112
#, fuzzy, kde-format
#| msgctxt "Name"
#| msgid "Background Test"
msgid "Background Weight"
msgstr "Bakgrunnstest"
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:40
#: data/effects/frei0r_lightgraffiti.xml:113
#, kde-format
msgid "Strength of the (calculated) background image. Setting it to 100 paints the light mask directly over the background, without the painting person in the image if the video starts with a «clean» background image. (See the α parameter.)"
msgstr ""
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:43
#: data/effects/frei0r_lightgraffiti.xml:116
#, fuzzy, kde-format
msgid "α"
msgstr "α"
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:45
#: data/effects/frei0r_lightgraffiti.xml:118
#, kde-format
msgid ""
"<![CDATA[Determines how the effect tries to adapt to background changes. <br/>"
"\n"
" The Light Graffiti effect remembers the first frame of the clip it is applied to, so the clip should <em>always</em> start with the painter outside of the video. If the background constantly changes, e.g. on a street, try to set α > 0 to calculate an average background image.]]>"
msgstr ""
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:49
#: data/effects/frei0r_lightgraffiti.xml:122
#, fuzzy, kde-format
#| msgid "Increase Saturation"
msgid "Increases the saturation of lights."
msgstr "Øk metning"
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:52
#: data/effects/frei0r_lightgraffiti.xml:125
#, fuzzy, kde-format
#| msgid "Show real-time statistics"
msgid "Show brightness statistics"
msgstr "Vis sanntidsresultater"
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:54
#: data/effects/frei0r_lightgraffiti.xml:127
#, kde-format
msgid ""
"<![CDATA[The stats switches allow easy and accurate adjustment of the threshold parameters.<br/>"
"\n"
" Example: To adjust the brightness threshold, check this box and adjust the threshold until the whole light source is highlighted. Repeat the same with the other parameters. Only parts that are highlighted in <em>all</em> thresholds will count as light source.]]>"
msgstr ""
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:57
#: data/effects/frei0r_lightgraffiti.xml:130
#, kde-format
msgid "Show background difference statistics"
msgstr ""
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:60
#: data/effects/frei0r_lightgraffiti.xml:133
#, kde-format
msgid "Show background difference sum statistics"
msgstr ""
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:64
#: data/effects/frei0r_lightgraffiti.xml:137
#, kde-format
msgid "Makes the background transparent, allowing to apply a composite effect and paint the light mask over a completely different video."
msgstr ""
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:67
#: data/effects/frei0r_lightgraffiti.xml:140
#, kde-format
msgid "Nonlinear dimming"
msgstr ""
#. +> trunk5 stable5
#: data/effects/frei0r_lightgraffiti.xml:68
#: data/effects/frei0r_lightgraffiti.xml:141
#, kde-format
msgid "If normal dimming does not look natural enough, try this one."
msgid "Resets the light mask and the background image. This is necessary e.g. if you apply this effect to a clip in the timeline and then move the timeline cursor from outside of the clip to the middle of it. The effect receives this frame in the middle as first frame and uses it as background image. For proper threshold adjusting move the timeline cursor to the beginning of the clip, check the Reset box and uncheck it again."
"<![CDATA[Changing the slope means multiplying the pixel value with a constant value. Black pixels will remain black, whileas brighter ones will be changed.<br/>"
"\n"
" All effects can be observed well when applied on a greyscale gradient and looking at the RGB Parade monitor.]]>"
" is on a removable device, will not be available when device is unplugged or mounted at a different position. You may want to copy it first to your hard-drive. Would you like to add it anyways?"
msgid "%1 missing source clips, you can only use the proxies"
msgstr ""
#. +> trunk5 stable5
#: src/doc/documentchecker.cpp:619
#, fuzzy, kde-format
msgid "Missing source clip"
msgstr "Omkode"
#. +> trunk5 stable5
#: src/doc/documentchecker.cpp:717
#, fuzzy, kde-format
#| msgid "1 folder"
#| msgid_plural "%1 folders"
msgid "Clips folder"
msgstr "1 mappe"
#. +> trunk5 stable5
#: src/doc/documentchecker.cpp:909
#, fuzzy, kde-format
#| msgid "Create new location"
msgid "Enter new location for file"
msgstr "Lag ny plassering"
#. +> trunk5 stable5
#: src/doc/documentchecker.cpp:1183
#, fuzzy, kde-format
#| msgid "This will remove the selected theme."
msgid "This will remove the selected clip from this project"
msgid_plural "This will remove the selected clips from this project"
msgstr[0] "Dette fjerner den valgte drakten."
msgstr[1] "Dette fjerner den valgte drakten."
#. +> trunk5 stable5
#: src/doc/documentchecker.cpp:1185
#, kde-format
msgid "Remove clips"
msgstr ""
#. +> trunk5 stable5
#: src/doc/documentvalidator.cpp:145
#, kde-format
msgid "The document was created in \"%1\" locale, which is not installed on your system. Please install that language pack. Until then, Kdenlive might not be able to correctly open the document."
msgstr ""
#. +> trunk5 stable5
#: src/doc/documentvalidator.cpp:158
#, kde-format
msgid "There is a locale conflict on your system. The document uses locale %1 which uses a \"%2\" as numeric separator (in system libraries) but Qt expects \"%3\". You might not be able to correctly open the project."
msgstr ""
#. +> trunk5 stable5
#: src/doc/documentvalidator.cpp:184
#, kde-format
msgid "There is a locale conflict. The document uses a \"%1\" as numeric separator, but your computer is configured to use \"%2\". Change your computer settings or you might not be able to correctly open the project."
msgstr ""
#. +> trunk5 stable5
#: src/doc/documentvalidator.cpp:365
#, kde-format
msgid ""
"This project type is unsupported (version %1) and cannot be loaded.\n"
"Please consider upgrading your Kdenlive version."
msgid "This project type is unsupported (version %1) and cannot be loaded."
msgstr ""
#. +> trunk5 stable5
#: src/doc/documentvalidator.cpp:944
#, kde-format
msgid "Some of your text clips were saved with size in points, which means different sizes on different displays. Do you want to convert them to pixel size, making them portable? It is recommended you do this on the computer they were first created on, or you could have to adjust their size."
msgstr ""
#. +> trunk5 stable5
#: src/doc/documentvalidator.cpp:947
#, kde-format
msgid "Update Text Clips"
msgstr ""
#. +> trunk5 stable5
#: src/doc/documentvalidator.cpp:1818
#, kde-format
msgid "extra audio"
msgstr ""
#. +> trunk5 stable5
#: src/doc/documentvalidator.cpp:2114
#, kde-format
msgid ""
"The project file uses some GPU effects. GPU acceleration is not currently enabled.\n"
"Do you want to convert the project to a non-GPU version?\n"
"This might result in data loss."
msgstr ""
#. +> trunk5 stable5
#: src/doc/documentvalidator.cpp:2206
#, fuzzy, kde-format
#| msgctxt "@info"
#| msgid "The following errors were encountered:"
msgid "The following filters/transitions were converted to non GPU versions:"
msgstr "Følgende feil ble fjunnet:"
#. +> trunk5 stable5
#: src/doc/documentvalidator.cpp:2209
#, fuzzy, kde-format
#| msgctxt "@info"
#| msgid "The following errors were encountered:"
msgid "The following filters/transitions were deleted from the project:"
msgid "You have changed the proxy parameters. Do you want to recreate all proxy clips for this project?"
msgstr ""
#. +> trunk5 stable5
#: src/mainwindow.cpp:1670
#, kde-format
msgid "The current project has not been saved. This will first save the project, then move all temporary files from <b>%1</b> to <b>%2</b>, and the project file will be reloaded"
msgstr ""
#. +> trunk5 stable5
#: src/mainwindow.cpp:1678
#, kde-format
msgid "This will move all temporary files from <b>%1</b> to <b>%2</b>, the project file will then be reloaded"
#| msgctxt "Shorter Text for 'New File' shown in the toolbar"
#| msgid "New"
msgid "New"
msgstr "Ny"
#. +> trunk5 stable5
#: src/qml/splash.qml:199
#, fuzzy, kde-format
#| msgctxt "@title:window"
#| msgid "Open"
msgid "Open"
msgstr "Åpne"
#. +> trunk5 stable5
#: src/qt-oauth-lib/logindialog.cpp:49
#, kde-format
msgid "Freesound Login"
msgstr ""
#. +> trunk5 stable5
#: src/qt-oauth-lib/logindialog.cpp:54
#, kde-format
msgid "Enter your freesound account details to download the highest quality version of this file. Or use the High Quality preview file instead (no freesound account required)."
msgstr ""
#. +> trunk5 stable5
#: src/scopes/abstractscopewidget.cpp:70
#, fuzzy, kde-format
#| msgctxt "Name"
#| msgid "Auto Refresh"
msgid "Auto Refresh"
msgstr "Automatisk oppfriskning"
#. +> trunk5 stable5
#: src/scopes/abstractscopewidget.cpp:72
#, kde-format
msgid "Realtime (with precision loss)"
msgstr ""
#. +> trunk5 stable5
#: src/scopes/audioscopes/audiospectrum.cpp:60
#: src/scopes/audioscopes/spectrogram.cpp:47
#, kde-format
msgid "Reset maximum frequency to sampling rate"
msgstr ""
#. +> trunk5 stable5
#: src/scopes/audioscopes/audiospectrum.cpp:61
#: src/scopes/audioscopes/spectrogram.cpp:50
#, fuzzy, kde-format
msgid "Track mouse"
msgstr "Følg musa"
#. +> trunk5 stable5
#: src/scopes/audioscopes/audiospectrum.cpp:63
#, fuzzy, kde-format
#| msgid "Show a maximum of"
msgid "Show maximum"
msgstr "Vis høyst"
#. +> trunk5 stable5
#: src/scopes/audioscopes/audiospectrum.cpp:77
#: src/scopes/audioscopes/spectrogram.cpp:67
#, fuzzy, kde-format
#| msgctxt "Puzzle grid type"
#| msgid "Rectangular grid"
msgid "Rectangular window"
msgstr "Rektangulært rutenett"
#. +> trunk5 stable5
#: src/scopes/audioscopes/audiospectrum.cpp:78
#: src/scopes/audioscopes/spectrogram.cpp:68
#, kde-format
msgid "Triangular window"
msgstr ""
#. +> trunk5 stable5
#: src/scopes/audioscopes/audiospectrum.cpp:79
#: src/scopes/audioscopes/spectrogram.cpp:69
#, kde-format
msgid "Hamming window"
msgstr ""
#. +> trunk5 stable5
#: src/scopes/audioscopes/audiospectrum.cpp:86
#: src/scopes/audioscopes/spectrogram.cpp:72
#, kde-format
msgid "The maximum window size is limited by the number of samples per frame."
msgstr ""
#. +> trunk5 stable5
#: src/scopes/audioscopes/audiospectrum.cpp:87
#: src/scopes/audioscopes/spectrogram.cpp:73
#, kde-format
msgid "A bigger window improves the accuracy at the cost of computational power."
msgstr ""
#. +> trunk5 stable5
#: src/scopes/audioscopes/audiospectrum.cpp:88
#: src/scopes/audioscopes/spectrogram.cpp:74
#, kde-format
msgid "The rectangular window function is good for signals with equal signal strength (narrow peak), but creates more smearing. See Window function on Wikipedia."
msgid "This title clip was created with a different frame size."
msgstr ""
#. +> trunk5 stable5
#: src/titler/titledocument.cpp:378
#, fuzzy, kde-format
msgid "Title Profile"
msgstr "Endre profil"
#. +> trunk5 stable5
#: src/titler/titledocument.cpp:430
#, kde-format
msgid "Some of your text clips were saved with size in points, which means different sizes on different displays. They will be converted to pixel size, making them portable, but you could have to adjust their size."
#| msgctxt "input dialog window title for selecting html elements"
#| msgid "Select elements"
msgid "Delete missing elements"
msgstr "Velg ut elementer"
#. +> trunk5 stable5
#: src/titler/titlewidget.cpp:2196
#, fuzzy, kde-format
msgid "The following files are missing:"
msgstr "Følgende filer mangler:"
#. +> trunk5 stable5
#: src/titler/titlewidget.cpp:2385
#, fuzzy, kde-format
msgctxt "Indicates the start of an animation"
msgid "Start"
msgstr "Start"
#. +> trunk5 stable5
#: src/titler/titlewidget.cpp:2386
#, fuzzy, kde-format
msgctxt "Indicates the end of an animation"
msgid "End"
msgstr "Slutt"
#. +> trunk5 stable5
#: src/titler/titlewidget.cpp:3057
#, fuzzy, kde-format
#| msgctxt "(qtundo-format)"
#| msgid "Gradient"
msgid "Gradient"
msgstr "Overgang"
#. +> trunk5 stable5
#: src/titler/unicodedialog.cpp:78
#, kde-format
msgid "Information about unicode characters: <a href=\"http://decodeunicode.org\">http://decodeunicode.org</a>"
msgstr ""
#. +> trunk5 stable5
#: src/titler/unicodedialog.cpp:79
#, kde-format
msgid "Previous Unicode character (Arrow Up)"
msgstr ""
#. +> trunk5 stable5
#: src/titler/unicodedialog.cpp:80
#, kde-format
msgid "Next Unicode character (Arrow Down)"
msgstr ""
#. +> trunk5 stable5
#: src/titler/unicodedialog.cpp:81
#, kde-format
msgid "Enter your Unicode number here. Allowed characters: [0-9] and [a-f]."
msgstr ""
#. +> trunk5 stable5
#: src/titler/unicodedialog.cpp:137
#, kde-format
msgid "<small>(no character selected)</small>"
msgstr ""
#. +> trunk5 stable5
#: src/titler/unicodedialog.cpp:146
#, kde-format
msgid "Control character. Cannot be inserted/printed. See <a href=\"http://en.wikipedia.org/wiki/Control_character\">Wikipedia:Control_character</a>"
msgstr ""
#. +> trunk5 stable5
#: src/titler/unicodedialog.cpp:148
#, kde-format
msgid "Line Feed (newline character, \\\\n)"
msgstr ""
#. +> trunk5 stable5
#: src/titler/unicodedialog.cpp:150
#, kde-format
msgid "Standard space character. (Other space characters: U+00a0, U+2000–200b, U+202f)"
msgstr ""
#. +> trunk5 stable5
#: src/titler/unicodedialog.cpp:152
#, kde-format
msgid "No-break space. &nbsp; in HTML. See U+2009 and U+0020."
msgstr ""
#. +> trunk5 stable5
#: src/titler/unicodedialog.cpp:155
#, kde-format
msgid ""
"<p><strong>«</strong> (u+00ab, <code>&lfquo;</code> in HTML) and <strong>»</strong> (u+00bb, <code>&rfquo;</code> in HTML) are called Guillemets or angle quotes. Usage in different countries: France (with non-breaking Space 0x00a0), Switzerland, Germany, Finland and Sweden.</p>"
"<p><strong>‹</strong> and <strong>›</strong> (U+2039/203a, <code>&lsaquo;/&rsaquo;</code>) are their single quote equivalents.</p>"
msgid "Three-Per-Em Space. Width: 1/3 of one <em>em</em>"
msgstr ""
#. +> trunk5 stable5
#: src/titler/unicodedialog.cpp:166
#, kde-format
msgid "Four-Per-Em Space. Width: 1/4 of one <em>em</em>"
msgstr ""
#. +> trunk5 stable5
#: src/titler/unicodedialog.cpp:168
#, kde-format
msgid "Six-Per-Em Space. Width: 1/6 of one <em>em</em>"
msgstr ""
#. +> trunk5 stable5
#: src/titler/unicodedialog.cpp:170
#, kde-format
msgid "Figure space (non-breaking). Width of a digit if digits have fixed width in this font."
msgstr ""
#. +> trunk5 stable5
#: src/titler/unicodedialog.cpp:172
#, kde-format
msgid "Punctuation Space. Width the same as between a punctuation character and the next character."
msgstr ""
#. +> trunk5 stable5
#: src/titler/unicodedialog.cpp:174
#, kde-format
msgid "Thin space, in HTML also &thinsp;. See U+202f and <a href=\"http://en.wikipedia.org/wiki/Space_(punctuation)\">Wikipedia:Space_(punctuation)</a>"
msgstr ""
#. +> trunk5 stable5
#: src/titler/unicodedialog.cpp:177
#, kde-format
msgid "Hair Space. Thinner than U+2009."
msgstr ""
#. +> trunk5 stable5
#: src/titler/unicodedialog.cpp:180
#, kde-format
msgid "Punctuation Apostrophe. Should be used instead of U+0027. See <a href=\"http://en.wikipedia.org/wiki/Apostrophe\">Wikipedia:Apostrophe</a>"
msgstr ""
#. +> trunk5 stable5
#: src/titler/unicodedialog.cpp:182
#, kde-format
msgid ""
"<p>An en Dash (dash of the width of an n).</p>"
"<p>Usage examples: In English language for value ranges (1878–1903), for relationships/connections (Zurich–Dublin). In the German language it is also used (with spaces!) for showing thoughts: “Es war – wie immer in den Ferien – ein regnerischer Tag.</p>"
"<p>Narrow no-break space. Has the same width as U+2009.</p>"
"<p>Usage: For units (spaces are marked with U+2423, ␣): 230␣V, −21␣°C, 50␣lb, <em>but</em> 90° (no space). In German for abbreviations (like: i. d. R. instead of i. d. R. with U+00a0).</p>"
msgid "Ellipsis: If text has been left o… See <a href=\"http://en.wikipedia.org/wiki/Ellipsis\">Wikipedia:Ellipsis</a>"
msgstr ""
#. +> trunk5 stable5
#: src/titler/unicodedialog.cpp:197
#, kde-format
msgid "Minus sign. For numbers: −42"
msgstr ""
#. +> trunk5 stable5
#: src/titler/unicodedialog.cpp:199
#, kde-format
msgid "Open box; stands for a space."
msgstr ""
#. +> trunk5 stable5
#: src/titler/unicodedialog.cpp:201
#, kde-format
msgid "Quarter note (Am.) or crochet (Brit.). See <a href=\"http://en.wikipedia.org/wiki/Quarter_note\">Wikipedia:Quarter_note</a>"
msgstr ""
#. +> trunk5 stable5
#: src/titler/unicodedialog.cpp:203
#, kde-format
msgid "Eighth note (Am.) or quaver (Brit.). Half as long as a quarter note (U+2669). See <a href=\"http://en.wikipedia.org/wiki/Eighth_note\">Wikipedia:Eighth_note</a>"
msgstr ""
#. +> trunk5 stable5
#: src/titler/unicodedialog.cpp:206
#, kde-format
msgid "Sixteenth note (Am.) or semiquaver (Brit.). Half as long as an eighth note (U+266a). See <a href=\"http://en.wikipedia.org/wiki/Sixteenth_note\">Wikipedia:Sixteenth_note</a>"
msgstr ""
#. +> trunk5 stable5
#: src/titler/unicodedialog.cpp:209
#, kde-format
msgid "Thirty-second note (Am.) or demisemiquaver (Brit.). Half as long as a sixteenth note (U+266b). See <a href=\"http://en.wikipedia.org/wiki/Thirty-second_note\">Wikipedia:Thirty-second_note</a>"
msgstr ""
#. +> trunk5 stable5
#: src/titler/unicodedialog.cpp:212
#, fuzzy, kde-format
#| msgid "No information available for this track"
msgid "<small>No additional information available for this character.</small>"
msgstr "Det finnes ingen informasjon tilgjengelig for dette sporet"
#. +> trunk5 stable5
#: src/transitions/transitionsrepository.cpp:46
#, kde-format
msgid "Some of your favorite compositions are invalid and were removed: %1"
"<p>Enter your freesound account details to download the highest quality version of this file. Or use the High Quality preview file instead (no freesound account required).</p>"
"HQ preview files are all mp3 files. We have added .mp3 as a file extension to the destination file name you chose. However, there is an existing file of this name present.\n"
msgid "Try importing again to obtain a new freesound connection"
msgstr ""
#. +> trunk5 stable5
#: src/utils/resourcewidget.cpp:796
#, fuzzy, kde-format
#| msgid "Do you want to overwrite these files?"
msgid "Do you want to overwrite the existing file?"
msgstr "Vil du skrive over disse filene?"
#. +> trunk5 stable5
#: src/utils/resourcewidget.cpp:840
#, fuzzy, kde-format
#| msgid "Saved to file: %1"
msgid "Saved file to"
msgstr "Lagret til fil: %1"
#. +> trunk5 stable5
#: src/utils/resourcewidget.cpp:847
#, kde-format
msgid "Error Saving File"
msgstr "Feil under fillagring"
#. +> trunk5 stable5
#: src/utils/resourcewidget.cpp:860
#, kde-format
msgid "Error Downloading File. Error code: %1"
msgstr ""
#. +> trunk5 stable5
#: src/utils/thememanager.cpp:75
#, kde-format
msgid "&Color Theme"
msgstr ""
#. +> trunk5 stable5
#: src/widgets/colorpickerwidget.cpp:68
#, kde-format
msgid "Pick a color on the screen. By pressing the mouse button and then moving your mouse you can select a section of the screen from which to get an average color."
msgstr ""
#. +> trunk5 stable5
#: src/widgets/dragvalue.cpp:118
#, fuzzy, kde-format
#| msgid "Normal Grayscale"
msgid "Normal scale"
msgstr "Normal gråtoner"
#. +> trunk5 stable5
#: src/widgets/dragvalue.cpp:119
#, fuzzy, kde-format
#| msgid "dx scale"
msgid "Pixel scale"
msgstr "dx-skala"
#. +> trunk5 stable5
#: src/widgets/dragvalue.cpp:120
#, kde-format
msgid "Nonlinear scale"
msgstr ""
#. +> trunk5 stable5
#: src/widgets/dragvalue.cpp:124
#, fuzzy, kde-format
#| msgid "Directory update"
msgid "Direct update"
msgstr "katalogoppdatering"
#. +> trunk5 stable5
#: src/widgets/dragvalue.cpp:129
#, fuzzy, kde-format
#| msgid "Reset Values"
msgid "Reset value"
msgstr "Tilbakestill til standardverdier"
#. +> trunk5 stable5
#: src/widgets/dragvalue.cpp:134
#, kde-format
msgid "Show %1 in timeline"
msgstr ""
#. +> trunk5 stable5
#: src/widgets/progressbutton.cpp:68
#, fuzzy, kde-format
#| msgid "%1s"
msgctxt "s as seconds"
msgid "%1s"
msgstr "%1s"
#. +> trunk5 stable5
#: src/widgets/progressbutton.cpp:72
#, fuzzy, kde-format
#| msgctxt "Height in meters"
#| msgid "%L1m"
msgctxt "m as minutes"
msgid "%1m"
msgstr "%L1m"
#. +> trunk5 stable5
#: src/widgets/progressbutton.cpp:74
#, fuzzy, kde-format
#| msgctxt "h for hours"
#| msgid "%1h"
msgctxt "h as hours"
msgid "%1h"
msgstr "%1t"
#, fuzzy
#~ msgid "Transcode clip"
#~ msgstr "Omkode"
#, fuzzy
#~ msgid "Transcoding clip"
#~ msgstr "Omkode"
#, fuzzy
#~ msgid "Waiting - transcode clip"
#~ msgstr "Omkode"
#, fuzzy
#~ msgid "Waiting - cut clip"
#~ msgstr "Omkode"
#, fuzzy
#~ msgid "Waiting - analyse clip"
#~ msgstr "Omkode"
#, fuzzy
#~ msgid "(%1 clip)"
#~ msgid_plural "(%1 clips)"
#~ msgstr[0] "Tittel"
#~ msgstr[1] "Tittel"
#, fuzzy
#~ msgid "Add Clip"
#~ msgstr "Farge 1"
#~ msgid "Aspect Ratio"
#~ msgstr "Bredde/høyde-forhold"
#~ msgid "Artistic"
#~ msgstr "Kunstnerisk"
#~ msgid "Blur and hide"
#~ msgstr "Tilslør og skjul"
#~ msgid "Alpha manipulation"
#~ msgstr "Alfamanipulering"
#~ msgid "Enhancement"
#~ msgstr "Forbedring"
#, fuzzy
#~ msgid "Audio thumbnails done"
#~ msgstr "Vis miniatyrbilder"
#, fuzzy
#~ msgid "Auto Split Clip"
#~ msgstr "Tittel"
#, fuzzy
#~ msgid "Delete clip markers"
#~ msgstr "Farge 1"
#~ msgid "Remove Folder"
#~ msgstr "Fjern mappe"
#, fuzzy
#~ msgid "Delete clip"
#~ msgid_plural "Delete clips"
#~ msgstr[0] "Slett skript"
#~ msgstr[1] "Slett skript"
#, fuzzy
#~ msgid "import"
#~ msgstr "Importer"
#, fuzzy
#~ msgid "Transparent background for images"
#~ msgstr "Gjennomsiktig bakgrunn"
#, fuzzy
#~ msgid "script"
#~ msgstr "skript"
#, fuzzy
#~ msgid "Author:"
#~ msgstr "Forfatter:"
#, fuzzy
#~ msgid "Show all effects"
#~ msgstr "Effekter"
#, fuzzy
#~ msgid "Show GPU effects"
#~ msgstr "Effekter"
#, fuzzy
#~ msgctxt "Folder Name"
#~ msgid "Custom"
#~ msgstr "Tilpasset"
#, fuzzy
#~ msgid "Group %1"
#~ msgstr "Gruppe"
#, fuzzy
#~ msgid "Wipe Softness"
#~ msgstr "Mykhet"
#, fuzzy
#~ msgid "Affine"
#~ msgstr "Affin"
#, fuzzy
#~ msgid "Fix Shear Y"
#~ msgstr "Skjær Y"
#, fuzzy
#~ msgid "Fix Shear X"
#~ msgstr "Skjær X"
#, fuzzy
#~ msgid "Fix Shear Z"
#~ msgstr "Skjær X"
#, fuzzy
#~ msgid "Transparency clip"
#~ msgstr "Gjennomsiktig"
#, fuzzy
#~ msgid "Reset keyframes after cursor"
#~ msgstr "Slett ramme"
#, fuzzy
#~ msgid "Reset keyframes before cursor"
#~ msgstr "Slett ramme"
#~ msgid "Theme"
#~ msgstr "Tema"
#, fuzzy
#~ msgid "Record Monitor"
#~ msgstr "Opptaksovervåker"
#, fuzzy
#~ msgctxt "Normal editing"
#~ msgid "n"
#~ msgstr "Inn"
#, fuzzy
#~ msgctxt "Razor tool shortcut"
#~ msgid "x"
#~ msgstr "x"
#, fuzzy
#~ msgid "Insert Zone in Timeline"
#~ msgstr "Snu"
#, fuzzy
#~ msgid "No clip to transcode"
#~ msgstr "Snu"
#, fuzzy
#~ msgid "Connect"
#~ msgstr "Koble til"
#, fuzzy
#~ msgid "Capturing"
#~ msgstr "Fang inn"
#, fuzzy
#~ msgid "Disconnect"
#~ msgstr "Koble fra"
#, fuzzy
#~ msgid "Capturing to %1"
#~ msgstr "Fang inn"
#, fuzzy
#~ msgid "Initialising..."
#~ msgstr "Oppstart …"
#, fuzzy
#~ msgid "Free space: %1"
#~ msgstr "Ledig plass: %1"
#, fuzzy
#~ msgid "Zone end: %1"
#~ msgstr "Funnet: %1"
#, fuzzy
#~ msgid "Delete subclip"
#~ msgid_plural "Delete subclips"
#~ msgstr[0] "Slett skript"
#~ msgstr[1] "Slett skript"
#, fuzzy
#~ msgid "Filter %1"
#~ msgstr "Filter %1"
#, fuzzy
#~ msgid "Waiting to process clip"
#~ msgstr "Omkode"
#, fuzzy
#~ msgid "proxy"
#~ msgstr "mellomtjener"
#, fuzzy
#~ msgid "Waiting - proxy"
#~ msgstr "Omkode"
#, fuzzy
#~ msgid "Interval capture"
#~ msgstr "Intervall"
#, fuzzy
#~ msgid "No Effect"
#~ msgstr "Ingen effekt"
#, fuzzy
#~ msgid "Show sequence thumbnails"
#~ msgstr "Vis miniatyrbilder"
#, fuzzy
#~ msgid " second"
#~ msgid_plural " seconds"
#~ msgstr[0] " sekund"
#~ msgstr[1] " sekunder"
#, fuzzy
#~ msgid "Stopped"
#~ msgstr "Stoppet"
#, fuzzy
#~ msgid "Delete Frame"
#~ msgstr "Slett ramme"
#, fuzzy
#~ msgid "Cannot use spacer in a locked track"
#~ msgstr "Snu"
#, fuzzy
#~ msgid "Cannot use spacer in a track with a group"
#~ msgstr "Snu"
#, fuzzy
#~ msgid "Cannot find clip to edit"
#~ msgstr "Snu"
#, fuzzy
#~ msgid "Cannot edit an item in a group"
#~ msgstr "Snu"
#, fuzzy
#~ msgid "Item is locked"
#~ msgstr "Elementet er låst"
#, fuzzy
#~ msgid "Cannot perform operation on a locked track"
#~ msgstr "Snu"
#, fuzzy
#~ msgid "Add timeline clip"
#~ msgstr "Tittel"
#, fuzzy
#~ msgid "Add %1"
#~ msgstr "Legg til %1"
#, fuzzy
#~ msgid "Delete %1"
#~ msgstr "Fjern %1"
#, fuzzy
#~ msgid "Cannot find clip to update effect"
#~ msgstr "Snu"
#, fuzzy
#~ msgid "Cannot find clip to cut"
#~ msgstr "Snu"
#, fuzzy
#~ msgid "Cannot find clip to uncut"
#~ msgstr "Snu"
#, fuzzy
#~ msgid "Error removing clip at %1 on track %2"
#~ msgstr "Snu"
#, fuzzy
#~ msgid "Cannot find transition to cut"
#~ msgstr "Snu"
#, fuzzy
#~ msgid "Cannot find transition to uncut"
#~ msgstr "Snu"
#, fuzzy
#~ msgid "Error removing transition at %1 on track %2"
#~ msgstr "Snu"
#, fuzzy
#~ msgid "You must be in an empty space to remove space (time: %1, track: %2)"
#~ msgstr "Snu"
#, fuzzy
#~ msgid "Cannot move clip at position %1, track %2"
#~ msgstr "Snu"
#, fuzzy
#~ msgid "Cannot move transition at position %1, track %2"
#~ msgstr "Snu"
#, fuzzy
#~ msgid "Delete selected group"
#~ msgid_plural "Delete selected groups"
#~ msgstr[0] "Slett valgt gruppe"
#~ msgid "Cannot find clip for speed change"
#~ msgstr "Kan ikke finne klipp for hastighetsendring"
#, fuzzy
#~ msgid "Razor clip"
#~ msgstr "Farge 1"
#, fuzzy
#~ msgid "Cut Group"
#~ msgstr "Klipp ut gruppe"
#, fuzzy
#~ msgid "Cannot insert clip."
#~ msgstr "Snu"
#, fuzzy
#~ msgid "Cannot insert clip..."
#~ msgstr "Snu"
#, fuzzy
#~ msgid "Cannot move clip at time: %1 on track %2"
#~ msgstr "Snu"
#, fuzzy
#~ msgid "Cannot move transition at time: %1 on track %2"
#~ msgstr "Snu"
#, fuzzy
#~ msgid "Resizing clip start failed!!"
#~ msgstr "Snu"
#, fuzzy
#~ msgid "Resizing clip end failed!!"
#~ msgstr "Snu"
#, fuzzy
#~ msgid "Resize clip start"
#~ msgstr "Snu"
#, fuzzy
#~ msgid "No clip copied"
#~ msgstr "Snu"
#, fuzzy
#~ msgid "Cannot paste transition to selected place"