msgid "To import an existing data file, enter its filename here. You will then describe the contents of the file below. You can leave the filename blank to construct a catalog file with a valid header, but no data."
"This button will compute the field-of-view (FOV) angle for a specific eyepiece/telescope combination. You must first specify the focal lengths of the telescope and eyepiece, and the FOV angle of the eyepiece in the above entry fields.\n"
"\n"
"The computed FOV angle (in arcminutes) will be displayed in the \"Field of view\" edit box."
"Enter the telescope focal length, in millimeters.\n"
"\n"
"This is one of the data fields required for defining a field-of-view (FOV) symbol which matches the field-of-view of a camera mounted on a telescope."
"Enter the physical size of the CCD chip or film negative.\n"
"\n"
"This is one of the data fields required for defining a field-of-view (FOV) symbol which matches the field-of-view of a camera mounted on a telescope."
"This button will compute the field-of-view (FOV) angle for a specific camera/telescope combination. You must first specify the focal length of the telescope and the size of the CCD chip or film negative.\n"
"\n"
"The computed FOV angle (in arcminutes) will be displayed in the \"Field of view\" edit box."
"This button will compute the Half Power Beam Width (HPBW) angle for a specific radiotelescope and observing wavelength combination, assuming no multibeam receiver is available at the telescope. You must first specify the diameter of the radiotelescope and the observing wavelength.\n"
"\n"
"The computed HPBW angle (in arcminutes) will be displayed in the \"Field of view\" edit box."
msgid "<p>Frame rotation with respect to Celestial Pole. Zero degrees indicates that <b>UP</b> is pointing directly at the pole. 90 degrees indicates that <b>UP</b> is rotated 90 degrees clockwise with respect to the pole.</p>"
msgid "Your data directory was not found. You can click the button below to copy a default KStars data directory to the correct location, or if you have a KStars directory already some place else, you can exit KStars and copy it to that location yourself."
msgid "Installing this in your data directory will enable the CCD Simulator in KStars to take realistic images. This is useful for testing sequences, plate solving, and learning to use KStars. Just click the button to install or unzip the zip file and place the gsc folder in the data directory."
"<p>You may now download optional data files to enhance KStars, such as Messier object images, or a more complete NGC/IC catalog. Press the <b>Download Extra Data</b> button to proceed. </p>"
"<p>You can also use this tool later, by selecting <b>Download New Data</b> from the <b>File</b> menu.</p>"
msgid "Are you sure you want to clear all of the solution points?"
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:1462
#, kde-format
msgid "Clear Solution Points"
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:1478
#, kde-format
msgid "Are you sure you want to clear all the alignment points?"
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:1479
#, kde-format
msgid "Clear Align Points"
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:1628
#, kde-format
msgid "The Mount Model Tool is Reset."
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:1665
#, kde-format
msgid "Please Check the Alignment Points."
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:1672
#, kde-format
msgid "In the Align Module, \"Nothing\" is Selected for the Solver Action. This means that the mount model tool will not sync/align your mount but will only report the pointing model errors. Do you wish to continue?"
msgid "Blind solver takes a very long time to solve but can reliably solve any image any where in the sky given enough time."
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:2777
#, kde-format
msgid "Use existing settings"
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:2778
#, kde-format
msgid "Mount must be pointing close to the target location and current field of view must match the image's field of view."
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:2781
#, kde-format
msgid "No metadata is available in this image. Do you want to use the blind solver or the existing solver settings?"
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:2783
#, kde-format
msgid "Astrometry solver"
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:2839
#, kde-format
msgid "Solver iteration #%1"
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:2877
#, kde-format
msgid "Solver RA (%1) DEC (%2) Orientation (%3) Pixel Scale (%4)"
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:2886
#, kde-format
msgid "Current focal length is %1 mm while computed focal length from the solver is %2 mm. Please update the mount focal length to obtain accurate results."
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:3011
#, kde-format
msgid "WCS information updated. Images captured from this point forward shall have valid WCS."
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:3027
#, kde-format
msgid "Solution coordinates: RA (%1) DEC (%2) Telescope Coordinates: RA (%3) DEC (%4)"
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:3033
#, kde-format
msgid "Target is within %1 degrees of solution coordinates."
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:3089
#, kde-format
msgid "Setting position angle to %1 degrees E of N..."
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:3126
#, kde-format
msgid "Maximum number of iterations reached. Solver failed."
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:3158
#, kde-format
msgid "Target is within acceptable range. Astrometric solver is successful."
msgid "Slewing to calibration position, please wait until telescope completes slewing."
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:4175
#, kde-format
msgid "Load Image"
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:4343
#, kde-format
msgid "World Coordinate System (WCS) is enabled. CCD rotation must be set either manually in the CCD driver or by solving an image before proceeding to capture any further images, otherwise the WCS information may be invalid."
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:4352
#, kde-format
msgid "World Coordinate System (WCS) is disabled."
msgid "Failed to process World Coordinate System: %1. Try again."
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:5104
#, kde-format
msgid "Celestial pole is located outside of the field of view. Would you like to sync and slew the telescope to the celestial pole? WARNING: Slewing near poles may cause your mount to end up in unsafe position. Proceed with caution."
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:5121
#, kde-format
msgid "Warning: Celestial pole is located outside the field of view. Move the mount closer to the celestial pole."
msgid "Accuracy threshold in arcseconds between solution and target coordinates. Plate solver shall be repeatedly executed until the solution coordinates are below the accuracy threshold"
msgid "<p>Use astrometry solver on remote machine running INDI server. You must select <b>Astrometry</b> driver from Auxiliary drivers in your Ekos devices profile for this option to be enabled.</p>"
msgid "The results from Astrometric Solutions from the Capture and Solve Tool, the Load and Slew Tool, and the Mount Model Tool will be displayed below."
msgid "Remove the selected row from the solutions table. This can be useful for getting rid of results that did not actually solve from the table and/or results that you do not need any more. It can clean up clutter on both the graph and table."
msgid "Launch the mount model tool. This tool enables you to create pre-programmed list of points to go to and solve. It can aid in building a pointing model for better accuracy."
msgid "<p>This tool provides a simple method to polar align a German equatorial mount. <span style=\" font-weight:600;\">Unpark</span> your mount, <span style=\" font-weight:600;\">Point</span> toward the celestial pole. Select mount direction and magnitude and then click <span style=\" font-weight:600;\">Start</span> to begin the process.</p>"
msgid "<p>Adjust mount's Altitude and Azimuth knobs until the selected star is centered within the crosshair. Click <b>Refresh</b> to begin continuous capture. You are <b>Done</b> when star is centered.</p>"
msgid "<p>This tool can help your mount build a better pointing model by moving the mount to different points in the sky and solving captured images. This can increase the accuracy of your GOTOs. To qualify, your mount must be capable of improving its internal pointing model after each <b>Sync</b> commanded by Ekos. If this is not the case, then this tool is not suitable for your mount.</p>"
"<p>Select the type of objects/points added by the wizard.</p>"
"<p><span style=\" font-weight:600;\">Note:</span> all of the options except Fixed DEC start with a grid of RA/DEC points.</p>"
"\n"
"<ul>\n"
"<li><b>Any Stars:</b> The wizard searches for the nearest star.</li>"
"\n"
"<li><b>Any object:</b> The wizard searches for the nearest object of any type.</li>"
"\n"
"<li><b>Named Stars</b> The wizard searches for the nearest star in the currently visible star list. Note that the first named star might be fairly far from the intended point and also sometimes the same star could be the closest one for multiple points.</li>"
"\n"
"<li><b>Fixed DEC:</b> The wizard generates all points at the chosen DEC.</li>"
"\n"
"<li><b>Fixed Grid:</b> The wizard just uses the original grid without trying to pair it with objects.</li>"
msgid "Automatically generate the specified number of alignment points in the table below. They will be generated based on the options selected in this wizard."
msgid "The Number of points the wizard should generate. If this number is less than 5, it will generate them at the same DEC. After that they will be evenly distributed over RA and DEC. Note, if Fixed DEC is selected, all of the points will be at the same DEC."
msgid "These are the common names for the named stars that are currently up at your location. If you select a star, it will be added to the table below."
msgid "These are the Greek names for the brighter stars that are currently up at your location. If you select a star, it will be added to the table below."
msgid "Clear the entire table of alignment points below. Note that this will not affect your mount in any way. It will not clear your pointing model. It just clears the list of points so that if you run the mount model routine again, these points will not be included."
msgid "<p>Remove the selected row from the alignment point table below. Note that it does <b>not</b> command your mount to clear that point from the model, it just means that if you run the mount model routine, that point will not be included in the list.</p>"
msgid "Add an empty row to the alignment list so that you can manually add an RA and DE for a position you would like the telescope to slew to when doing the mount model routine."
msgid "Open the Find Object dialog so that you can select an object to get an RA and DEC automatically that you would like the telescope to slew to when doing the mount model routine."
msgid "Sort the alignment points, starting with the point closest to the current telescope position, to try to minimize the distance between each slew."
msgid "This is a table of alignment points that you would like the mount model routine to use in aligning your telescope. If you would like to add or remove points, you may use the buttons above. If you would like to run, pause, or stop the mount model routine, you may use the buttons below. You can directly edit an RA or DE for a particular point directly in the cells. Just be sure to follow the format hh:mm:ss. The object name is just provided for convenience and is not used. If you want to change the order of the alignment points, you can drag the row up or down using the vertical header for that row on the left."
msgid "Start or pause the mount model routine. It will slew to and astrometrically solve the list of points in the table above using the settings in the align module. If the routine was previously paused, it will pick up where it left off. If it was stopped or it had finished it will start the routine over again."
msgid "<p>Stop the mount model routine. It will <b>not</b> clear any points from your telescope's pointing model. It will stop the routine and any points currently being solved. If you run the mount model again after hitting stop, it will start the routine over again with the first point.</p>"
msgstr ""
#. +> trunk5
#: ekos/align/offlineastrometryparser.cpp:64
#, kde-format
msgid "Failed to find astrometry.net binaries. Please ensure astrometry.net is installed and try again."
msgstr ""
#. +> trunk5
#: ekos/align/offlineastrometryparser.cpp:65
#, kde-format
msgid "Missing astrometry files"
msgstr ""
#. +> trunk5
#: ekos/align/offlineastrometryparser.cpp:91
#, kde-format
msgid "Detected Astrometry.net version %1"
msgstr ""
#. +> trunk5
#: ekos/align/offlineastrometryparser.cpp:96
#, kde-format
msgid "Setting astrometry option --no-fits2fits"
msgstr ""
#. +> trunk5
#: ekos/align/offlineastrometryparser.cpp:101
#, kde-format
msgid "Turning off option --no-fits2fits"
msgstr ""
#. +> trunk5
#: ekos/align/offlineastrometryparser.cpp:186
#, kde-format
msgid "Index file %1 is missing. Astrometry.net would not be able to adequately solve plates until you install the missing index files. Download the index files from http://www.astrometry.net"
msgstr ""
#. +> trunk5
#: ekos/align/offlineastrometryparser.cpp:190
#, kde-format
msgid "Index files %1 to %2 are missing. Astrometry.net would not be able to adequately solve plates until you install the missing index files. Download the index files from http://www.astrometry.net"
msgstr ""
#. +> trunk5
#: ekos/align/offlineastrometryparser.cpp:210
#: ekos/align/opsastrometrycfg.cpp:47
#: ekos/align/opsastrometryindexfiles.cpp:212
#, kde-format
msgid ""
"Astrometry configuration file corrupted or missing: %1\n"
"Please set the configuration file full path in INDI options."
msgstr ""
#. +> trunk5
#: ekos/align/offlineastrometryparser.cpp:232
#: ekos/align/opsastrometryindexfiles.cpp:234
#, kde-format
msgid "Unable to find data dir in astrometry configuration file."
msgstr ""
#. +> trunk5
#: ekos/align/offlineastrometryparser.cpp:282
#, kde-format
msgid "Error starting solver: %1"
msgstr ""
#. +> trunk5
#: ekos/align/offlineastrometryparser.cpp:300
#, kde-format
msgid "Starting solver..."
msgstr ""
#. +> trunk5
#: ekos/align/offlineastrometryparser.cpp:333
#: ekos/align/remoteastrometryparser.cpp:245
#, kde-format
msgid "Solver failed. Try again."
msgstr ""
#. +> trunk5
#: ekos/align/offlineastrometryparser.cpp:357
#, kde-format
msgid "WCS header missing or corrupted. Solver failed."
msgstr ""
#. +> trunk5
#: ekos/align/offlineastrometryparser.cpp:390
#: ekos/align/onlineastrometryparser.cpp:485
#: ekos/align/remoteastrometryparser.cpp:287
#, kde-format
msgid "Solver completed in %1 second."
msgid_plural "Solver completed in %1 seconds."
msgstr[0] ""
msgstr[1] ""
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:80
#, kde-format
msgid "Error: no connection to the Internet."
msgstr ""
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:189
#, kde-format
msgid "Failed to open the file %1: %2"
msgstr ""
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:260
#, kde-format
msgid "Uploading file..."
msgstr ""
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:333
#, kde-format
msgid "JSON error during parsing (%1)."
msgstr ""
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:351
#, kde-format
msgid "Astrometry.net authentication failed. Check the validity of the Astrometry.net API Key."
msgstr ""
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:359
#, kde-format
msgid "Authentication to astrometry.net is successful. Session: %1"
msgstr ""
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:368
#, kde-format
msgid "Upload failed."
msgstr ""
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:377
#, kde-format
msgid "Parsing submission ID failed."
msgstr ""
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:382
#, kde-format
msgid "Upload complete. Waiting for astrometry.net solver to complete..."
msgstr ""
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:405
#, kde-format
msgid "Failed to retrieve job ID."
msgstr ""
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:430
#, kde-format
msgid "Solver timed out."
msgstr ""
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:439
#, kde-format
msgid "Solver failed after %1 second."
msgid_plural "Solver failed after %1 seconds."
msgstr[0] ""
msgstr[1] ""
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:449
#, kde-format
msgid "Error parsing parity."
msgstr ""
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:456
#, kde-format
msgid "Error parsing orientation."
msgstr ""
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:464
#, kde-format
msgid "Error parsing RA."
msgstr ""
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:471
#: ekos/align/onlineastrometryparser.cpp:479
#, kde-format
msgid "Error parsing DEC."
msgstr ""
#. +> trunk5
#: ekos/align/opsalign.cpp:36
#, kde-format
msgid "Internal or External Plate Solver?"
msgstr ""
#. +> trunk5
#: ekos/align/opsalign.cpp:41
#, kde-format
msgid "Internal or External astrometry.cfg?"
msgstr ""
#. i18n: ectx: label, entry (AstrometryWCSIsInternal), group (Align)
"<p>On Load & Slew, solve the image and slew the mount to the target location and then rotate the camera to match the orientation of the FITS image.</p>"
"<p>Rotator threshold in arc-minutes when using Load & Slew. If the difference between measured position angle and FITS position angle is below this value, the Load & Slew operation is considered successful.</p>"
msgid "This will prevent the solver from looking at an already existing WCS Header before blindly trying to solve the image. It is recommended to keep it checked."
msgid "Do not use Sync when Slew to Target is selected. Use differential slewing to correct for discrepancies. This is useful on some mounts (e.g. Paramount)."
"<p><span style=\" font-weight:600;\">Offline</span> astrometry.net solver requires index files in order to solve an image. Please see the Astrometrty.net <a href=\"http://astrometry.net/doc/readme.html\"><span style=\" text-decoration: underline; color:#0000ff;\">README</span></a> for details. The following list provides a complete list of the index files, along with recommended index files to install given the current CCD Field of View. Installed index files are checked. Next to each index file is an icon that represents the following:</p>"
"<p>This button will open the Astrometry Index File folder on your filesystem so that you can see where it is located and copy files into it if needed.</p>"
"<p>Enable Logs to diagnose issues with Ekos and INDI. Only enable the necessary logs to help in diagnosing specific problems. Logs consume resources and may slow the system down. Turn off logs when no longer used.</p>"
"<p>Accept ADU values that fall within this range around the desired ADU target. For example, if the ADU value was set to 10000 and the tolerance was set to 100, then frames with ADU values f 9900 and 10100 shall be accepted.</p>"
#. i18n("Ekos will refocus in %1 seconds, last procedure was %2 seconds ago.", refocusEveryNTimer.elapsed()/1000-refocusEveryNTimer.elapsed()*60, refocusEveryNTimer.elapsed()/1000));
#. +> trunk5
-#: ekos/capture/capture.cpp:5202
+#: ekos/capture/capture.cpp:5212
#, kde-format
msgid "Ekos will refocus in %1 seconds, last procedure was %2 seconds ago."
msgstr ""
#. +> trunk5
-#: ekos/capture/capture.cpp:5206
+#: ekos/capture/capture.cpp:5216
#, kde-format
msgid "Ekos will refocus as soon as possible, last procedure was %1 seconds ago."
"<li><strong>Client</strong>: Captured images are only uploaded to Ekos.</li>"
"\n"
"<li><strong>Local</strong>: Captured images are only saved locally on the remote computer.</li>"
"\n"
"<li><strong>Both</strong>: Captured images are saved on remote device <b>and</b> uploaded to Ekos.</li>"
"\n"
"</ol>"
"\n"
"<p>When selecting <i>Local</i> or <i>Both</i>, you must specify the remote directory where the remote images are saved to. By default, all captured images are uploaded to Ekos."
"<p>Command a meridian flip if the hour angle exceeds the specified value. Capture and Guiding will be suspended and resumed after the flip is complete.</p>"
"<p>Select custom properties to be set when the sequence job is executed in batch mode. After the desired property value is set in INDI Control Panel, add it to the<span style=\" font-weight:600;\"> Job Properties</span> section. Click <span style=\" font-weight:600;\">Apply</span> to record the property values.</p>"
"<p>Please fill the required information below. This is a one-time setup. You can obtain these values from your camera manual or from online sources such as <a href=\"http://www.digicamdb.com/\"><span style=\" text-decoration: underline; color:#007af4;\">Digital Camera Database</span></a>.</p>"
"<p>Position Angle (PA) is defined as degrees E of N. Zero degrees indicate frame <span style=\" font-weight:600;\">UP</span> points directly toward the celestial pole. 90 degrees indicate frame <span style=\" font-weight:600;\">UP</span> points 90 degrees counter-clockwise with respect to the celestial pole.</p>"
"<p>PA is calculated from raw rotator angle plus modifiers to match the rotation angle as measured by astrometry. Enter the modifiers manually or solve an image in the Align Module to generate them automatically.</p>"
msgid "<b>Initial</b> step size in ticks to cause a noticeable change in HFR value. For timer based focuser, it is the initial time in milliseconds to move the focuser inward or outward"
"<li><b>Iterative</b>: Moves focuser by discreet steps initially decided by the step size. Once a curve slope is calculated, further step sizes are calculated to reach optimal solution. The algorithm stops when the measured HFR is within percentage tolerance of the minimum HFR recorded in the procedure.</li>"
"\n"
"<li><b>Polynomial</b>: Starts with iterative method. Upon crossing to the other side of the V-Curve, polynomial fitting coefficients along with possible minimum solution are calculated. This algorithm can be faster than purely iterative approach given a good data set.</li>"
msgid "You must stop auto guiding before changing this setting."
msgstr ""
#. +> trunk5
#: ekos/guide/guide.cpp:2502
#, kde-format
msgid "Rapid Guiding is enabled. Guide star will be determined automatically by the CCD driver. No frames are sent to Ekos unless explicitly enabled by the user in the CCD driver settings."
msgstr ""
#. +> trunk5
#: ekos/guide/guide.cpp:2505
#, kde-format
msgid "Rapid Guiding is disabled."
msgstr ""
#. +> trunk5
#: ekos/guide/guide.cpp:2741
#, kde-format
msgctxt "Drift graphics tooltip; %1 is local time; %2 is RA deviation; %3 is DE deviation in arcseconds;"
"<p>Subframe the image around the guide star. Before checking this option, you must <span style=\" font-weight:600;\">first</span> capture an image and select a guide star. Uncheck it to take a full frame again.</p>"
msgid "Mount guiding rate. Find out the guiding rate used by your mount and update the value here to get the <b>recommended</b> value of proportional gain suitable for your mount. Setting this value <b>does not</b> change your mount guiding rate."
"<p>Proportional term accounts for present values of the error. For example, if the error is large and positive, the guider corrective pulse will also be large and positive.</p>"
"<p>Integral term accounts for past values of the error. For example, if the current pulse is not sufficiently strong, the integral of the error will accumulate over time, and the guider will respond by applying a stronger action.</p>"
msgid "Maximum deviation to correct for using Adaptive Optics unit. If the guiding deviation exceeds this value, Ekos will guide the mount mechanically"
"<p>Drag the slider to scroll through guide history while displaying the RA and DEC error points on both graphs. Dragging to the far right will set the guide plots to display the latest guide data and autoscroll the graph.</p>"
"<p>Autoscale both Guide Graphs to their default scale. If any points are located outside this range, the view is expanded to include them (with the exception of the time axis in the drift graphics).</p>"
"<p>Lead time is the minimum time in minutes between jobs. The scheduler starts execution of a job before its scheduled startup time by this lead time. Early execution is useful as focusing, alignment, and guiding procedures may take prolonged periods to time to complete.</p>"
"<p>In case no scheduler job is scheduled for this many hours, perform a complete shutdown procedure and restart observatory operations once the next job is ready.</p>"
"<p>If guiding calibration fails then restart alignment process before proceeding to guiding recalibration process again. This can help recenter the target object in the field of view if the calibration process strayed too far off.</p>"
msgid "Maximum acceptable difference between requested and measured temperature set point. When the temperature threshold is below this value, the temperature set point request is deemed successful."
"<p>If using a filter wheel and an absolute position focuser, then always remember the focus position of the autofocus process for light frames in each filter. Before a flat frame is captured, the focuser is moved to the same focus point as light frames.</p>"
"<p>Set HFR Threshold percentage gain. When an autofocus operation is completed, the autofocus HFR value is increased by this threshold percentage value and stored within the capture module. If In-Sequence-Focus is engaged, the autofocus module only performs autofocusing procedure if current HFR value exceeds the capture module HFR threshold. Increase value to permit more relaxed changes in HFR values without requiring a full autofocus run.</p>"
"<p>In-Sequence HFR threshold value controls when the autofocus process is started. If the measured HFR value exceeds the HFR threshold, autofocus process is initiated. If the HFR threshold value is zero initially (default), then the autofocus process best HFR value is used to set the new HFR threshold, after applying the HFR threshold modifier percentage. This new HFR threshold is then used for subsequent In-Sequence focus checks. If this option is enabled, the HFR threshold value is constant and gets saved to the sequence file.</p>"
#. i18n: ectx: label, entry (MaxDarkTemperatureDiff), group (DarkLibrary)
#. +> trunk5
#: ekos/opsekos.ui:610 kstars.kcfg:1476
#, kde-format
msgid "Maximum acceptable difference between current and recorded dark frame temperature set point. When the difference exceeds this value, a new dark frame shall be captured for this set point."
"<p>Specify Remote drivers to chain with INDI server. Remote INDI drivers must be already running. If port is different from the default (7624), then it must be specified. For example, to connect to ZWO ASI120MC driver running on 192.168.1.50 on port 8000, the connection string is:</p>"
"<p>Welcome to the <span style=\" font-weight:600;\">Ekos Profile Wizard</span></p>"
"<p>Ekos is the premier observatory control and automation platform. With Ekos, you can capture images and gather scientific data with ease. This Wizard will help you create your equipment profile. You will be asked to verify some basic information. </p>"
"<p>Please click <span style=\" font-weight:600;\">next</span> to continue. </p>"
"<p><a href=\"https://github.com/knro/indiwebmanager\"><span style=\" text-decoration: underline; color:#007af4;\">INDI Web Manager</span></a> running on the Remote Computer?</p>"
"<p><span style=\" font-weight:600;\">Tip</span>: <span style=\" font-style:italic;\">INDI Web Manager</span> is a service that runs on remote devices to help you start and stop INDI services remotely.</p>"
"<p>To use Ekos with your equipment locally on Windows, you need to download and install <a href=\"http://www.cloudmakers.eu/windi/\"><span style=\" text-decoration: underline; color:#007af4;\">INDI Server for Windows</span></a>.</p>"
"<p>After installing <span style=\" font-style:italic;\">INDI Server for Windows (wINDI)</span>, establish connection with your equipment. wINDI requires <a href=\"http://www.ascom-standards.org/\"><span style=\" text-decoration: underline; color:#007af4;\">ASCOM</span></a> drivers for all your equipment, so make sure to install all necessary ASCOM drivers for your gear.</p>"
"<p>After successfully starting INDI Server in wINDI, click <span style=\" font-weight:600;\">Ready</span> to continue.</p>"
"<p><span style=\" font-weight:600;\">Tip</span>: INDI Server for Windows functionality is limited compared to the native INDI drivers on Linux. It is recommended to install native INDI on an embedded Linux device such as <a href=\"http://indilib.org/support/tutorials/169-ekos-on-raspberry-pi-complete-guide.html\"><span style=\" text-decoration: underline; color:#007af4;\">Raspberry PI</span></a>.</p>"
"<p><span style=\" font-weight:600;\">Tip</span>: External INDI Server can be <a href=\"http://www.cloudmakers.eu/indiserver/\"><span style=\" text-decoration: underline; color:#007af4;\">INDI Server for OSX</span></a> or an INDI Server launched manually locally. If unsure, select Internal INDI Server.</p>"
"<p><span style=\" font-weight:600;\">Tip</span>: Internal Guider is recommended. Using external guider applications requires additional setup instructions outside the scope of Ekos.</p>"
"<p>If the remote computer has astrometry.net installed, you can run the remote astrometry driver and use it to solve images in Ekos Align module.</p>"
"<p>Use the INDI WatchDog driver. It monitors connection between your remote equipment and Ekos. If the communication is lost between the two, the WatchDog driver goes into safe mode and executes a shutdown procedure to protect your equipment.</p>"
"<p>If you plan to use SkySafari to monitor and/or control your mount, check this box to start INDI SkySafari Server. You can connect SkySafari to this server and it shall enable you to connect and control your mount. For more details, please check the <a href=\"http://indilib.org/devices/telescopes/skysafari.html\"><span style=\" text-decoration: underline; color:#007af4;\">INDI SkySafari Documentation.</span></a></p>"
msgid "Camera's rotation angle (East of North) in degrees. To measure the angle, solve an image and use the astrometry solver solution's rotation angle"
msgid "Warning: Job '%1' has completion condition set to infinite repeat, other jobs may not execute."
msgstr ""
#. +> trunk5
#: ekos/scheduler/scheduler.cpp:571
#, kde-format
msgid "Warning: job '%1' has startup time %2 resulting in a negative score, and will be marked invalid when processed."
msgstr ""
#. +> trunk5
#: ekos/scheduler/scheduler.cpp:576
#, kde-format
msgid "Warning: job '%1' has fixed startup time %2 set in the past, and will be marked invalid when evaluated."
msgstr ""
#. +> trunk5
#: ekos/scheduler/scheduler.cpp:628
#, kde-format
msgid "Warning: job '%1' at row %2 has a duplicate target at row %3, the scheduler may consider the same storage for captures."
msgstr ""
#. +> trunk5
#: ekos/scheduler/scheduler.cpp:636
#, kde-format
msgid "Warning: jobs '%1' at row %2 and %3 probably require a different repeat count as currently they will complete simultaneously after %4 batches (or disable option 'Remember job progress')"
msgstr ""
#. +> trunk5
#: ekos/scheduler/scheduler.cpp:641
#, kde-format
msgid "Warning: job '%1' at row %2 might require a specific startup time or a different priority, as currently they will start in order of insertion in the table"
msgstr ""
#. +> trunk5
#: ekos/scheduler/scheduler.cpp:713
#, kde-format
msgid "Warning: you cannot add or modify a job while the scheduler is running."
msgstr ""
#. +> trunk5
#: ekos/scheduler/scheduler.cpp:847
#, kde-format
msgid "Use edition fields to create a new job in the observation list."
msgstr ""
#. +> trunk5
#: ekos/scheduler/scheduler.cpp:1060
#, kde-format
msgid "Job '%1' has not been processed upon scheduler stop, marking aborted."
msgstr ""
#. +> trunk5
#: ekos/scheduler/scheduler.cpp:1067
#, kde-format
msgid "Scheduler aborted."
msgstr ""
#. +> trunk5
#: ekos/scheduler/scheduler.cpp:1124
#, kde-format
msgid "Scheduler is in shutdown until next job is ready"
msgid "Scheduler is awake. Jobs shall be started when ready..."
msgstr ""
#. +> trunk5
-#: ekos/scheduler/scheduler.cpp:1832
+#: ekos/scheduler/scheduler.cpp:1739
#, kde-format
msgid "Scheduler is awake. Jobs shall be started when scheduler is resumed."
msgstr ""
#. +> trunk5
-#: ekos/scheduler/scheduler.cpp:1899
+#: ekos/scheduler/scheduler.cpp:1806
#, kde-format
msgid "Warning: job '%1' reaches an altitude of %2 degrees at %3 but will not be scheduled due to close proximity to astronomical twilight rise."
msgstr ""
#. +> trunk5
-#: ekos/scheduler/scheduler.cpp:1912
+#: ekos/scheduler/scheduler.cpp:1819
#, kde-format
msgid "Job '%1' is scheduled to start at %2 where its altitude is %3 degrees."
msgstr ""
#. +> trunk5
-#: ekos/scheduler/scheduler.cpp:1923
+#: ekos/scheduler/scheduler.cpp:1830
#, kde-format
msgid "Warning: job '%1' has no night time with an altitude above %2 degrees during the next 24 hours, marking invalid."
msgstr ""
#. +> trunk5
-#: ekos/scheduler/scheduler.cpp:1926
+#: ekos/scheduler/scheduler.cpp:1833
#, kde-format
msgid "Warning: job '%1' cannot rise to an altitude above %2 degrees in the next 24 hours, marking invalid."
msgstr ""
#. +> trunk5
-#: ekos/scheduler/scheduler.cpp:1929
+#: ekos/scheduler/scheduler.cpp:1836
#, kde-format
msgid "Warning: job '%1' cannot be scheduled with an altitude above %2 degrees with minimum moon separation of %3 degrees in the next 24 hours, marking invalid."
msgstr ""
#. +> trunk5
-#: ekos/scheduler/scheduler.cpp:1952
+#: ekos/scheduler/scheduler.cpp:1859
#, kde-format
msgid "%1 Transit time is %2"
msgstr ""
#. +> trunk5
-#: ekos/scheduler/scheduler.cpp:1961
+#: ekos/scheduler/scheduler.cpp:1868
#, kde-format
msgid "%1 Observation time is %2 adjusted for %3 minute."
msgid_plural "%1 Observation time is %2 adjusted for %3 minutes."
msgstr[0] ""
msgstr[1] ""
#. +> trunk5
-#: ekos/scheduler/scheduler.cpp:1967
+#: ekos/scheduler/scheduler.cpp:1874
#, kde-format
msgid "%1 culminates during the day and cannot be scheduled for observation."
msgstr ""
#. +> trunk5
-#: ekos/scheduler/scheduler.cpp:1973
+#: ekos/scheduler/scheduler.cpp:1880
#, kde-format
msgid "Observation time for %1 already passed."
msgstr ""
#. +> trunk5
-#: ekos/scheduler/scheduler.cpp:1997
+#: ekos/scheduler/scheduler.cpp:1904
#, kde-format
msgid "Weather conditions are OK."
msgstr ""
#. +> trunk5
-#: ekos/scheduler/scheduler.cpp:2001
+#: ekos/scheduler/scheduler.cpp:1908
#, kde-format
msgid "Warning: weather conditions are in the WARNING zone."
msgstr ""
#. +> trunk5
-#: ekos/scheduler/scheduler.cpp:2005
+#: ekos/scheduler/scheduler.cpp:1912
#, kde-format
msgid "Caution: weather conditions are in the DANGER zone!"
msgstr ""
#. +> trunk5
-#: ekos/scheduler/scheduler.cpp:2012
+#: ekos/scheduler/scheduler.cpp:1919
#, kde-format
msgid "Warning: Ekos did not receive any weather updates for the last %1 minutes."
msgstr ""
#. +> trunk5
-#: ekos/scheduler/scheduler.cpp:2033
+#: ekos/scheduler/scheduler.cpp:1940
#, kde-format
msgid "Weather conditions in warning zone"
msgstr ""
#. +> trunk5
-#: ekos/scheduler/scheduler.cpp:2041
+#: ekos/scheduler/scheduler.cpp:1948
#, kde-format
msgid "Weather conditions are critical. Observatory shutdown is imminent"
msgstr ""
#. +> trunk5
-#: ekos/scheduler/scheduler.cpp:2057
+#: ekos/scheduler/scheduler.cpp:1964
#, kde-format
msgid "Starting shutdown procedure due to severe weather."
msgstr ""
#. +> trunk5
-#: ekos/scheduler/scheduler.cpp:2192
+#: ekos/scheduler/scheduler.cpp:2099
#, kde-format
msgid "Job '%1' target altitude is %3 degrees at %2 (score %4)."
msgstr ""
#. +> trunk5
-#: ekos/scheduler/scheduler.cpp:2276
+#: ekos/scheduler/scheduler.cpp:2183
#, kde-format
msgid "Job '%1' target is %3 degrees from Moon (score %2)."
msgstr ""
#. +> trunk5
-#: ekos/scheduler/scheduler.cpp:2294
+#: ekos/scheduler/scheduler.cpp:2201
#, kde-format
msgid "Astronomical twilight rise is at %1, set is at %2, and current time is %3"
msgstr ""
#. +> trunk5
-#: ekos/scheduler/scheduler.cpp:2322
+#: ekos/scheduler/scheduler.cpp:2227
+#, kde-format
+msgid "Job '%1' scheduled for execution at %2. Observatory scheduled for shutdown until next job is ready."
+msgstr ""
+
+#. +> trunk5
+#: ekos/scheduler/scheduler.cpp:2259
+#, kde-format
+msgid "Job '%1' scheduled for execution at %2. Parking the mount until the job is ready."
+msgstr ""
+
+#. +> trunk5
+#: ekos/scheduler/scheduler.cpp:2271
+#, kde-format
+msgid "Sleeping until observation job %1 is ready at %2..."
+msgstr ""
+
+#. +> trunk5
+#: ekos/scheduler/scheduler.cpp:2273
+#, kde-format
+msgid "Scheduler is in sleep mode"
+msgstr ""
+
+#. +> trunk5
+#: ekos/scheduler/scheduler.cpp:2281
+#, kde-format
+msgid "Warning: Job '%1' is %2 away from now, you may want to enable Preemptive Shutdown."
msgid "Select optional FITS file to be used for alignment. When using FITS, specify the object or the estimated coordinates which are used to slew the mount."
msgid "Start the observation job when the object reaches culmination adjusted for the offset value in minutes. By default, the observation job runs 60 minutes prior to culmination."
"<p>One-time startup procedure to be executed before starting Ekos. The script is executed <span style=\" font-weight:600; text-decoration: underline;\">before</span> the startup procedures (e.g. unpark scope), if selected, are executed.</p>"
"<p>One-time shutdown procedure to be executed after all scheduler jobs are completed. The script is executed <span style=\" font-weight:600; text-decoration: underline;\">after</span> the shutdown procedures (e.g. parking), if selected, are completed.</p>"
"<li style=\" margin-top:12px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-weight:600;\">Auto Debayer</span>: Bayered images will not be debayered. Only grayscale images are shown.</li>"
"<li style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-weight:600;\">Auto WCS</span>: World Coordinate System data will not be processed. WCS maps sky coordinates to image coordinates. Equatorial grid lines, object identification, and telescope slew within an image are disabled.</li>"
"<li style=\" margin-top:0px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-weight:600;\">3D Cube</span>: RGB images will not be processed. Only grayscale images are shown.</li>"
"<p>Automatically load World-Coordinate-System (WCS) data when opening a FITS file.</p>"
"<p><span style=\" font-weight:600;\">Warning: Only enable this option on very fast machines as it can lead to unpredictable behavior resulting in crashes on slower machines.</span></p>"
"<p>To create an <span style=\" font-weight:600;\">Alias</span> from an existing driver, select an existing driver and then only change the <span style=\" font-weight:600;\">Label </span>then press<span style=\" font-weight:600;\"> Add.</span></p>"
"<p>Mount handset is the master source of time and location settings. KStars time and location settings are synchronized with controller settings.</p>"
"<p>Set SER video <b>remote</b> directory name. If INDI server is running locally, then a local directory can be selected. However, if you are connected to a remote INDI server, then the directory must be a valid directory on the remote file system where it is saved.</p>"
"\n"
"<p>Record directories may contain some patterns to make them dynamic:</p>"
"Verify if the following time, date, and location settings are correct. If any of the settings are incorrect, you can correct them via the <tt>Set time</tt> and <tt>Set Location</tt> buttons.\n"
"Enter the port number your telescope is connected to. If you only have one serial port in your computer, the port is usually <tt>/dev/ttyUSB0</tt>\n"
"<br>"
"<br>"
"If you are unsure about the port number, you can leave the field empty and KStars will try to scan the ports for attached telescopes. Beware that the autoscan process might take a few minutes to complete. "
msgid "Switch to horizonal view (Horizontal &Coordinates)"
msgstr ""
#. i18n: ectx: label, entry (PositionTimeBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:9
#, kde-format
msgid "Position of the time InfoBox."
msgstr ""
#. i18n: ectx: whatsthis, entry (PositionTimeBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:10
#, kde-format
msgid "The screen coordinates of the Time InfoBox."
msgstr ""
#. i18n: ectx: label, entry (PositionFocusBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:14
#, kde-format
msgid "Position of the focus InfoBox."
msgstr ""
#. i18n: ectx: whatsthis, entry (PositionFocusBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:15
#, kde-format
msgid "The screen coordinates of the Focus InfoBox."
msgstr ""
#. i18n: ectx: label, entry (PositionGeoBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:19
#, kde-format
msgid "Position of the geographic InfoBox."
msgstr ""
#. i18n: ectx: whatsthis, entry (PositionGeoBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:20
#, kde-format
msgid "The screen coordinates of the Geographic Location InfoBox."
msgstr ""
#. i18n: ectx: label, entry (ShadeTimeBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:24
#, kde-format
msgid "Is the time InfoBox in the \"shaded\" state?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShadeTimeBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:25
#, kde-format
msgid "If true, the Time InfoBox will show only its top line of data."
msgstr ""
#. i18n: ectx: label, entry (ShadeFocusBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:29
#, kde-format
msgid "Is the focus InfoBox in the \"shaded\" state?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShadeFocusBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:30
#, kde-format
msgid "If true, the Focus InfoBox will show only its top line of data."
msgstr ""
#. i18n: ectx: label, entry (ShadeGeoBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:34
#, kde-format
msgid "Is the geographic InfoBox in the \"shaded\" state?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShadeGeoBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:35
#, kde-format
msgid "If true, the Geographic Location InfoBox will show only its top line of data."
msgstr ""
#. i18n: ectx: label, entry (ShowInfoBoxes), group (GUI)
#. +> trunk5
#: kstars.kcfg:39
#, kde-format
msgid "Meta-option to toggle display of all InfoBoxes"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowInfoBoxes), group (GUI)
#. +> trunk5
#: kstars.kcfg:40
#, kde-format
msgid "Toggles display of all three InfoBoxes."
msgstr ""
#. i18n: ectx: label, entry (ShowTimeBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:44
#, kde-format
msgid "Display the time InfoBox?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowTimeBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:45
#, kde-format
msgid "Toggles display of the Time InfoBox."
msgstr ""
#. i18n: ectx: label, entry (ShowFocusBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:49
#, kde-format
msgid "Display the focus InfoBox?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowFocusBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:50
#, kde-format
msgid "Toggles display of the Focus InfoBox."
msgstr ""
#. i18n: ectx: label, entry (ShowGeoBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:54
#, kde-format
msgid "Display the geographic InfoBox?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowGeoBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:55
#, kde-format
msgid "Toggles display of the Geographic Location InfoBox."
msgstr ""
#. i18n: ectx: label, entry (StickyTimeBox), group (GUI)
#. i18n: ectx: label, entry (StickyFocusBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:59 kstars.kcfg:66
#, kde-format
msgid "Time InfoBox anchor flag"
msgstr ""
#. i18n: ectx: whatsthis, entry (StickyTimeBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:60
#, kde-format
msgid "Is the Time InfoBox anchored to a window edge? 0 = not anchored; 1 = anchored to right edge; 2 = anchored to bottom edge; 3 = anchored to bottom and right edges."
msgstr ""
#. i18n: ectx: whatsthis, entry (StickyFocusBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:67
#, kde-format
msgid "Is the Focus InfoBox anchored to a window edge? 0 = not anchored; 1 = anchored to right edge; 2 = anchored to bottom edge; 3 = anchored to bottom and right edges."
msgstr ""
#. i18n: ectx: label, entry (StickyGeoBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:73
#, kde-format
msgid "Geographic InfoBox anchor flag"
msgstr ""
#. i18n: ectx: whatsthis, entry (StickyGeoBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:74
#, kde-format
msgid "Is the Geographic Location InfoBox anchored to a window edge? 0 = not anchored; 1 = anchored to right edge; 2 = anchored to bottom edge; 3 = anchored to bottom and right edges."
msgstr ""
#. i18n: ectx: label, entry (ShowStatusBar), group (GUI)
#. +> trunk5
#: kstars.kcfg:80
#, kde-format
msgid "Display the statusbar?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowStatusBar), group (GUI)
#. +> trunk5
#: kstars.kcfg:81
#, kde-format
msgid "Toggle display of the status bar."
msgstr ""
#. i18n: ectx: label, entry (ShowAltAzField), group (GUI)
#. +> trunk5
#: kstars.kcfg:85
#, kde-format
msgid "Display Alt/Az coordinates in the statusbar?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowAltAzField), group (GUI)
#. +> trunk5
#: kstars.kcfg:86
#, kde-format
msgid "Toggle display of the Horizontal coordinates of the mouse cursor in the status bar."
msgstr ""
#. i18n: ectx: label, entry (ShowRADecField), group (GUI)
#. +> trunk5
#: kstars.kcfg:90
#, kde-format
msgid "Display RA/Dec coordinates in the statusbar?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowRADecField), group (GUI)
#. +> trunk5
#: kstars.kcfg:91
#, kde-format
msgid "Toggle display of the Equatorial coordinates of the mouse cursor at the current epoch in the status bar."
msgstr ""
#. i18n: ectx: label, entry (ShowJ2000RADecField), group (GUI)
#. +> trunk5
#: kstars.kcfg:95
#, kde-format
msgid "Display J2000.0 RA/Dec coordinates in the statusbar?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowJ2000RADecField), group (GUI)
#. +> trunk5
#: kstars.kcfg:96
#, kde-format
msgid "Toggle display of the Equatorial coordinates of the mouse cursor at the standard epoch in the status bar."
msgstr ""
#. i18n: ectx: label, entry (ShowSensorFOV), group (GUI)
#. +> trunk5
#: kstars.kcfg:100
#, kde-format
msgid "Display CCD sensor angular size on the sky map?"
msgstr ""
#. i18n: ectx: label, entry (WindowWidth), group (GUI)
#. +> trunk5
#: kstars.kcfg:104
#, kde-format
msgid "Width of main window, in pixels"
msgstr ""
#. i18n: ectx: label, entry (WindowHeight), group (GUI)
#. +> trunk5
#: kstars.kcfg:108
#, kde-format
msgid "Height of main window, in pixels"
msgstr ""
#. i18n: ectx: label, entry (RunStartupWizard), group (GUI)
#. +> trunk5
#: kstars.kcfg:112
#, kde-format
msgid "Run Startup Wizard when KStars launches?"
msgstr ""
#. i18n: ectx: label, entry (CurrentTheme), group (GUI)
#. +> trunk5
#: kstars.kcfg:116
#, kde-format
msgid "Current application theme"
msgstr ""
#. i18n: ectx: label, entry (CatalogFile), group (Catalogs)
#. +> trunk5
#: kstars.kcfg:123
#, kde-format
msgid "Filenames of defined custom object catalogs."
msgstr ""
#. i18n: ectx: whatsthis, entry (CatalogFile), group (Catalogs)
#. +> trunk5
#: kstars.kcfg:124
#, kde-format
msgid "List of the filenames of custom object catalogs."
msgstr ""
#. i18n: ectx: label, entry (ShowCatalog), group (Catalogs)
#. +> trunk5
#: kstars.kcfg:127
#, kde-format
msgid "List of toggles for displaying custom object catalogs."
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowCatalog), group (Catalogs)
#. +> trunk5
#: kstars.kcfg:128
#, kde-format
msgid "List of integers toggling display of each custom object catalog (any nonzero value indicates the objects in that catalog will be displayed)."
msgstr ""
#. i18n: ectx: label, entry (ShowCatalogNames), group (Catalogs)
#. +> trunk5
#: kstars.kcfg:131
#, kde-format
msgid "List for displaying custom object catalogs."
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowCatalogNames), group (Catalogs)
#. +> trunk5
#: kstars.kcfg:132
#, kde-format
msgid "List of names for which custom catalogs are to be displayed."
msgstr ""
#. i18n: ectx: label, entry (ResolveNamesOnline), group (Catalogs)
#. +> trunk5
#: kstars.kcfg:135
#, kde-format
msgid "Resolve names using online services."
msgstr ""
#. i18n: ectx: whatsthis, entry (ResolveNamesOnline), group (Catalogs)
#. +> trunk5
#: kstars.kcfg:136
#, kde-format
msgid "Names of objects entered into the find dialog are resolved using online services and stored in the database. This option also toggles the display of such resolved objects on the sky map."
msgstr ""
#. i18n: ectx: label, entry (INDIWindowWidth), group (indi)
#. +> trunk5
#: kstars.kcfg:143
#, kde-format
msgid "INDI window width"
msgstr ""
#. i18n: ectx: label, entry (INDIWindowHeight), group (indi)
#. +> trunk5
#: kstars.kcfg:147
#, kde-format
msgid "INDI window height"
msgstr ""
#. i18n: ectx: label, entry (useGeographicUpdate), group (indi)
#. i18n: ectx: label, entry (useTimeUpdate), group (indi)
#. +> trunk5
#: kstars.kcfg:155
#, kde-format
msgid "Automatically updates time and date?"
msgstr ""
#. i18n: ectx: label, entry (independentWindowINDI), group (indi)
#. +> trunk5
#: kstars.kcfg:159
#, kde-format
msgid "Make INDI Control Panel window independent of KStars main window"
msgstr ""
#. i18n: ectx: label, entry (showTargetCrosshair), group (indi)
#. +> trunk5
#: kstars.kcfg:163
#, kde-format
msgid "Draw crosshairs at telescope position in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (showTargetCrosshair), group (indi)
#. +> trunk5
#: kstars.kcfg:164
#, kde-format
msgid "Toggle display of crosshairs centered at telescope's pointed position in the KStars sky map."
msgstr ""
#. i18n: ectx: label, entry (showINDIMessages), group (indi)
#. +> trunk5
#: kstars.kcfg:168
#, kde-format
msgid "Display INDI messages in the statusbar?"
msgstr ""
#. i18n: ectx: whatsthis, entry (showINDIMessages), group (indi)
#. +> trunk5
#: kstars.kcfg:169
#, kde-format
msgid "Toggle display of INDI messages in the KStars statusbar."
msgstr ""
#. i18n: ectx: label, entry (messageNotificationINDI), group (indi)
#. +> trunk5
#: kstars.kcfg:173
#, kde-format
msgid "INDI message notifications"
msgstr ""
#. i18n: ectx: whatsthis, entry (messageNotificationINDI), group (indi)
#. +> trunk5
#: kstars.kcfg:174
#, kde-format
msgid "Show INDI messages as desktop notifications instead of dialogs."
msgstr ""
#. i18n: ectx: label, entry (useKStarsSource), group (indi)
#. +> trunk5
#: kstars.kcfg:178
#, kde-format
msgid "Use KStars time and location for synchronization?"
msgstr ""
#. i18n: ectx: label, entry (useMountSource), group (indi)
#. +> trunk5
#: kstars.kcfg:182
#, kde-format
msgid "Use mount time and location for synchronization?"
msgstr ""
#. i18n: ectx: label, entry (useGPSSource), group (indi)
#. +> trunk5
#: kstars.kcfg:186
#, kde-format
msgid "Use GPS time and location for synchronization?"
msgstr ""
#. i18n: ectx: label, entry (fitsDir), group (indi)
#. +> trunk5
#: kstars.kcfg:190
#, kde-format
msgid "FITS Default directory"
msgstr ""
#. i18n: ectx: whatsthis, entry (fitsDir), group (indi)
#. +> trunk5
#: kstars.kcfg:191
#, kde-format
msgid "The default location of saved FITS files"
msgstr ""
#. i18n: ectx: label, entry (serverPortStart), group (indi)
#. +> trunk5
#: kstars.kcfg:195
#, kde-format
msgid "INDI Server Start Port"
msgstr ""
#. i18n: ectx: whatsthis, entry (serverPortStart), group (indi)
#. +> trunk5
#: kstars.kcfg:196
#, kde-format
msgid "INDI server will attempt to bind with ports starting from this port"
msgstr ""
#. i18n: ectx: label, entry (serverPortEnd), group (indi)
#. +> trunk5
#: kstars.kcfg:200
#, kde-format
msgid "INDI Server Final Port"
msgstr ""
#. i18n: ectx: whatsthis, entry (serverPortEnd), group (indi)
#. +> trunk5
#: kstars.kcfg:201
#, kde-format
msgid "INDI server will attempt to bind with ports ending with this port"
msgstr ""
#. i18n: ectx: label, entry (filterAlias), group (indi)
#. +> trunk5
#: kstars.kcfg:205
#, kde-format
msgid "Aliases for filter wheel slots."
msgstr ""
#. i18n: ectx: whatsthis, entry (filterAlias), group (indi)
#. +> trunk5
#: kstars.kcfg:206
#, kde-format
msgid "List of the aliases for filter wheel slots."
msgstr ""
#. i18n: ectx: label, entry (indiServer), group (indi)
#. i18n: ectx: whatsthis, entry (indiServer), group (indi)
#. +> trunk5
#: kstars.kcfg:209 kstars.kcfg:210
#, kde-format
msgid "PATH to indiserver binary"
msgstr ""
#. i18n: ectx: label, entry (indiServerIsInternal), group (indi)
#. +> trunk5
#: kstars.kcfg:214
#, kde-format
msgid "Internal or External INDI Server?"
msgstr ""
#. i18n: ectx: label, entry (indiDriversDir), group (indi)
#. i18n: ectx: whatsthis, entry (indiDriversDir), group (indi)
#. +> trunk5
#: kstars.kcfg:218 kstars.kcfg:219
#, kde-format
msgid "PATH to indi drivers directory"
msgstr ""
#. i18n: ectx: label, entry (indiDriversAreInternal), group (indi)
#. i18n: ectx: label, entry (AstrometrySolverIsInternal), group (Align)
#. +> trunk5
#: kstars.kcfg:223 kstars.kcfg:1860
#, kde-format
msgid "Internal or External Astrometry Solver?"
msgstr ""
#. i18n: ectx: label, entry (streamWindowWidth), group (indi)
#. +> trunk5
#: kstars.kcfg:227
#, kde-format
msgid "Video streaming window width"
msgstr ""
#. i18n: ectx: label, entry (streamWindowHeight), group (indi)
#. +> trunk5
#: kstars.kcfg:231
#, kde-format
msgid "Video streaming window height"
msgstr ""
#. i18n: ectx: label, entry (INDIMountLogging), group (indi)
#. +> trunk5
#: kstars.kcfg:235
#, kde-format
msgid "Enable INDI Mount logging"
msgstr ""
#. i18n: ectx: label, entry (INDIFocuserLogging), group (indi)
#. +> trunk5
#: kstars.kcfg:239
#, kde-format
msgid "Enable INDI Focuser logging"
msgstr ""
#. i18n: ectx: label, entry (INDICCDLogging), group (indi)
#. +> trunk5
#: kstars.kcfg:243
#, kde-format
msgid "Enable INDI CCD logging"
msgstr ""
#. i18n: ectx: label, entry (INDIFilterWheelLogging), group (indi)
#. +> trunk5
#: kstars.kcfg:247
#, kde-format
msgid "Enable INDI Filter Wheel logging"
msgstr ""
#. i18n: ectx: label, entry (INDIDomeLogging), group (indi)
#. +> trunk5
#: kstars.kcfg:251
#, kde-format
msgid "Enable INDI Dome logging"
msgstr ""
#. i18n: ectx: label, entry (INDIDetectorLogging), group (indi)
#. +> trunk5
#: kstars.kcfg:255
#, kde-format
msgid "Enable INDI Detector logging"
msgstr ""
#. i18n: ectx: label, entry (INDIWeatherLogging), group (indi)
#. +> trunk5
#: kstars.kcfg:259
#, kde-format
msgid "Enable INDI Weather logging"
msgstr ""
#. i18n: ectx: label, entry (INDIAuxiliaryLogging), group (indi)
#. +> trunk5
#: kstars.kcfg:263
#, kde-format
msgid "Enable INDI Auxiliary logging"
msgstr ""
#. i18n: ectx: label, entry (INDIRotatorLogging), group (indi)
#. +> trunk5
#: kstars.kcfg:267
#, kde-format
msgid "Enable INDI Rotator logging"
msgstr ""
#. i18n: ectx: label, entry (INDIGPSLogging), group (indi)
#. +> trunk5
#: kstars.kcfg:271
#, kde-format
msgid "Enable INDI GPS logging"
msgstr ""
#. i18n: ectx: label, entry (INDIAOLogging), group (indi)
#. +> trunk5
#: kstars.kcfg:275
#, kde-format
msgid "Enable INDI Adaptive Optics logging"
msgstr ""
#. i18n: ectx: label, entry (CityName), group (Location)
#. +> trunk5
#: kstars.kcfg:282
#, kde-format
msgid "City name of geographic location."
msgstr ""
#. i18n: ectx: whatsthis, entry (CityName), group (Location)
#. +> trunk5
#: kstars.kcfg:283
#, kde-format
msgid "The City name of the current geographic location."
msgstr ""
#. i18n: ectx: label, entry (ProvinceName), group (Location)
#. +> trunk5
#: kstars.kcfg:287
#, kde-format
msgid "Province name of geographic location."
msgstr ""
#. i18n: ectx: whatsthis, entry (ProvinceName), group (Location)
#. +> trunk5
#: kstars.kcfg:288
#, kde-format
msgid "The Province name of the current geographic location. This is the name of the state for locations in the U. S."
msgstr ""
#. i18n: ectx: label, entry (CountryName), group (Location)
#. +> trunk5
#: kstars.kcfg:292
#, kde-format
msgid "Country name of geographic location."
msgstr ""
#. i18n: ectx: whatsthis, entry (CountryName), group (Location)
#. +> trunk5
#: kstars.kcfg:293
#, kde-format
msgid "The Country name of the current geographic location."
msgstr ""
#. i18n: ectx: label, entry (Longitude), group (Location)
#. +> trunk5
#: kstars.kcfg:297
#, kde-format
msgid "Geographic Longitude, in degrees."
msgstr ""
#. i18n: ectx: whatsthis, entry (Longitude), group (Location)
#. +> trunk5
#: kstars.kcfg:298
#, kde-format
msgid "The longitude of the current geographic location, in decimal degrees."
msgstr ""
#. i18n: ectx: label, entry (Latitude), group (Location)
#. +> trunk5
#: kstars.kcfg:302
#, kde-format
msgid "Geographic Latitude, in degrees."
msgstr ""
#. i18n: ectx: whatsthis, entry (Latitude), group (Location)
#. +> trunk5
#: kstars.kcfg:303
#, kde-format
msgid "The latitude of the current geographic location, in decimal degrees."
msgstr ""
#. i18n: ectx: label, entry (Elevation), group (Location)
#. +> trunk5
#: kstars.kcfg:307
#, kde-format
msgid "Elevation above sea level of geographic location, in meters."
msgstr ""
#. i18n: ectx: label, entry (TimeZone), group (Location)
#. +> trunk5
#: kstars.kcfg:311
#, kde-format
msgid "Time Zone offset of geographic location, in hours."
msgstr ""
#. i18n: ectx: label, entry (DST), group (Location)
#. +> trunk5
#: kstars.kcfg:315
#, kde-format
msgid "Two-letter code for daylight savings time rule used by geographic location."
msgstr ""
#. i18n: ectx: whatsthis, entry (DST), group (Location)
#. +> trunk5
#: kstars.kcfg:316
#, kde-format
msgid "Two-letter code that determines the dates on which daylight savings time begins and ends (you can view the rules by pressing the \"Explain DST Rules\" button in the Geographic Location window)."
msgstr ""
#. i18n: ectx: label, entry (UseAnimatedSlewing), group (View)
#. +> trunk5
#: kstars.kcfg:323
#, kde-format
msgid "Use animated slewing effects when changing focus position?"
msgstr ""
#. i18n: ectx: whatsthis, entry (UseAnimatedSlewing), group (View)
#. +> trunk5
#: kstars.kcfg:324
#, kde-format
msgid "If true, focus changes will cause the sky to visibly spin to the new position. Otherwise, the display will \"snap\" instantly to the new position."
msgstr ""
#. i18n: ectx: label, entry (FOVNames), group (View)
#. +> trunk5
#: kstars.kcfg:328
#, kde-format
msgid "Name of selected FOV indicators"
msgstr ""
#. i18n: ectx: whatsthis, entry (FOVNames), group (View)
#. +> trunk5
#: kstars.kcfg:329
#, kde-format
msgid "The names of the currently selected field-of-view indicators. The list of defined FOV indicator names is listed in the \"Settings|FOV Symbols\" menu."
msgstr ""
#. i18n: ectx: label, entry (FadePlanetTrails), group (View)
#. +> trunk5
#: kstars.kcfg:333
#, kde-format
msgid "Fade planet trails to background color?"
msgstr ""
#. i18n: ectx: whatsthis, entry (FadePlanetTrails), group (View)
#. +> trunk5
#: kstars.kcfg:334
#, kde-format
msgid "If true, trails attached to solar system bodies will fade into the background sky color."
msgstr ""
#. i18n: ectx: label, entry (FocusRA), group (View)
#. +> trunk5
#: kstars.kcfg:338
#, kde-format
msgid "Right Ascension of focus position"
msgstr ""
#. i18n: ectx: whatsthis, entry (FocusRA), group (View)
#. +> trunk5
#: kstars.kcfg:339
#, kde-format
msgid "The right ascension of the initial focus position of the sky map, in decimal hours. This value is volatile; it is reset whenever the program shuts down."
msgstr ""
#. i18n: ectx: label, entry (FocusDec), group (View)
#. +> trunk5
#: kstars.kcfg:343
#, kde-format
msgid "Declination of focus position"
msgstr ""
#. i18n: ectx: whatsthis, entry (FocusDec), group (View)
#. +> trunk5
#: kstars.kcfg:344
#, kde-format
msgid "The declination of the initial focus position of the sky map, in decimal degrees. This value is volatile; it is reset whenever the program shuts down."
msgstr ""
#. i18n: ectx: label, entry (FocusObject), group (View)
#. +> trunk5
#: kstars.kcfg:348
#, kde-format
msgid "Name of focused object"
msgstr ""
#. i18n: ectx: whatsthis, entry (FocusObject), group (View)
#. +> trunk5
#: kstars.kcfg:349
#, kde-format
msgid "The name of the object that should be centered and tracked on startup. If no object should be centered, set to \"nothing\". This value is volatile; it is reset whenever the program shuts down."
msgstr ""
#. i18n: ectx: label, entry (IsTracking), group (View)
#. +> trunk5
#: kstars.kcfg:353
#, kde-format
msgid "Is tracking engaged?"
msgstr ""
#. i18n: ectx: whatsthis, entry (IsTracking), group (View)
#. +> trunk5
#: kstars.kcfg:354
#, kde-format
msgid "True if the skymap should track on its initial position on startup. This value is volatile; it is reset whenever the program shuts down."
msgstr ""
#. i18n: ectx: label, entry (HideOnSlew), group (View)
#. +> trunk5
#: kstars.kcfg:358
#, kde-format
msgid "Hide objects while moving?"
msgstr ""
#. i18n: ectx: whatsthis, entry (HideOnSlew), group (View)
#. +> trunk5
#: kstars.kcfg:359
#, kde-format
msgid "Toggle whether KStars should hide some objects while the display is moving, for smoother motion."
msgstr ""
#. i18n: ectx: label, entry (HideCBounds), group (View)
#. +> trunk5
#: kstars.kcfg:363
#, kde-format
msgid "Hide constellation boundaries while moving?"
msgstr ""
#. i18n: ectx: whatsthis, entry (HideCBounds), group (View)
#. +> trunk5
#: kstars.kcfg:364
#, kde-format
msgid "Toggle whether constellation boundaries are hidden while the display is in motion."
msgstr ""
#. i18n: ectx: label, entry (HideCLines), group (View)
msgid "Draw grids according to active coordinate system?"
msgstr ""
#. i18n: ectx: whatsthis, entry (AutoSelectGrid), group (View)
#. +> trunk5
#: kstars.kcfg:519
#, kde-format
msgid "Coordinate grids will automatically change according to active coordinate system."
msgstr ""
#. i18n: ectx: label, entry (ShowEquatorialGrid), group (View)
#. +> trunk5
#: kstars.kcfg:523
#, kde-format
msgid "Draw equatorial coordinate grid in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowEquatorialGrid), group (View)
#. +> trunk5
#: kstars.kcfg:524
#, kde-format
msgid "Toggle whether the equatorial coordinate grid is drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowHorizontalGrid), group (View)
#. +> trunk5
#: kstars.kcfg:528
#, kde-format
msgid "Draw horizontal coordinate grid in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowHorizontalGrid), group (View)
#. +> trunk5
#: kstars.kcfg:529
#, kde-format
msgid "Toggle whether the horizontal coordinate grid is drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowLocalMeridian), group (View)
#. +> trunk5
#: kstars.kcfg:533
#, kde-format
msgid "Draw local meridian line in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowLocalMeridian), group (View)
#. +> trunk5
#: kstars.kcfg:534
#, kde-format
msgid "Toggle whether the local meridian line is drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowGround), group (View)
#. +> trunk5
#: kstars.kcfg:538
#, kde-format
msgid "Draw opaque ground in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowGround), group (View)
#. +> trunk5
#: kstars.kcfg:539
#, kde-format
msgid "Toggle whether the region below the horizon is opaque."
msgstr ""
#. i18n: ectx: label, entry (ShowHorizon), group (View)
#. +> trunk5
#: kstars.kcfg:543
#, kde-format
msgid "Draw horizon line in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowHorizon), group (View)
#. +> trunk5
#: kstars.kcfg:544
#, kde-format
msgid "Toggle whether the horizon line is drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowFlags), group (View)
#. +> trunk5
#: kstars.kcfg:548
#, kde-format
msgid "Draw flags in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowFlags), group (View)
#. +> trunk5
#: kstars.kcfg:549
#, kde-format
msgid "Toggle whether flags are drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowIC), group (View)
#. +> trunk5
#: kstars.kcfg:553
#, kde-format
msgid "Draw IC objects in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowIC), group (View)
#. +> trunk5
#: kstars.kcfg:554
#, kde-format
msgid "Toggle whether IC objects are drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowNGC), group (View)
#. +> trunk5
#: kstars.kcfg:558
#, kde-format
msgid "Draw NGC objects in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowNGC), group (View)
#. +> trunk5
#: kstars.kcfg:559
#, kde-format
msgid "Toggle whether NGC objects are drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowMessier), group (View)
#. +> trunk5
#: kstars.kcfg:563
#, kde-format
msgid "Draw Messier objects in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowMessier), group (View)
#. +> trunk5
#: kstars.kcfg:564
#, kde-format
msgid "Toggle whether Messier objects are drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowMessierImages), group (View)
#. +> trunk5
#: kstars.kcfg:568
#, kde-format
msgid "Draw Messier object images in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowMessierImages), group (View)
#. +> trunk5
#: kstars.kcfg:569
#, kde-format
msgid "Toggle whether Messier objects are rendered as images in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowOther), group (View)
#. +> trunk5
#: kstars.kcfg:573
#, kde-format
msgid "Draw extra deep-sky objects in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowOther), group (View)
#. +> trunk5
#: kstars.kcfg:574
#, kde-format
msgid "Toggle whether extra objects are drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowMilkyWay), group (View)
#. +> trunk5
#: kstars.kcfg:578
#, kde-format
msgid "Draw Milky Way contour in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowMilkyWay), group (View)
#. +> trunk5
#: kstars.kcfg:579
#, kde-format
msgid "Toggle whether the Milky Way contour is drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (FillMilkyWay), group (View)
#. +> trunk5
#: kstars.kcfg:583
#, kde-format
msgid "Fill Milky Way contour? (false means use outline only)"
msgstr ""
#. i18n: ectx: whatsthis, entry (FillMilkyWay), group (View)
#. +> trunk5
#: kstars.kcfg:584
#, kde-format
msgid "Toggle whether the Milky Way contour is filled. When this option is false, the Milky Way is shown as an outline."
msgstr ""
#. i18n: ectx: label, entry (ShowSolarSystem), group (View)
#. +> trunk5
#: kstars.kcfg:588
#, kde-format
msgid "Meta-option for all planets in the sky map."
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowSolarSystem), group (View)
#. +> trunk5
#: kstars.kcfg:589
#, kde-format
msgid "Meta-option to control whether all major planets (and the Sun and Moon) are drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowPlanetImages), group (View)
#. +> trunk5
#: kstars.kcfg:593
#, kde-format
msgid "Draw planets as images in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowPlanetImages), group (View)
#. +> trunk5
#: kstars.kcfg:594
#, kde-format
msgid "Toggle whether major planets (and the Sun and Moon) are rendered as images in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowPlanetNames), group (View)
#. +> trunk5
#: kstars.kcfg:598
#, kde-format
msgid "Label planet names in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowPlanetNames), group (View)
#. +> trunk5
#: kstars.kcfg:599
#, kde-format
msgid "Toggle whether major planets (and the Sun and Moon) are labeled in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowSun), group (View)
#. +> trunk5
#: kstars.kcfg:603
#, kde-format
msgid "Draw Sun in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowSun), group (View)
#. +> trunk5
#: kstars.kcfg:604
#, kde-format
msgid "Toggle whether the Sun is drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowMoon), group (View)
#. +> trunk5
#: kstars.kcfg:608
#, kde-format
msgid "Draw Moon in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowMoon), group (View)
#. +> trunk5
#: kstars.kcfg:609
#, kde-format
msgid "Toggle whether the Moon is drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowMercury), group (View)
#. +> trunk5
#: kstars.kcfg:613
#, kde-format
msgid "Draw Mercury in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowMercury), group (View)
#. +> trunk5
#: kstars.kcfg:614
#, kde-format
msgid "Toggle whether Mercury is drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowVenus), group (View)
#. +> trunk5
#: kstars.kcfg:618
#, kde-format
msgid "Draw Venus in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowVenus), group (View)
#. +> trunk5
#: kstars.kcfg:619
#, kde-format
msgid "Toggle whether Venus is drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowMars), group (View)
#. +> trunk5
#: kstars.kcfg:623
#, kde-format
msgid "Draw Mars in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowMars), group (View)
#. +> trunk5
#: kstars.kcfg:624
#, kde-format
msgid "Toggle whether Mars is drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowJupiter), group (View)
#. +> trunk5
#: kstars.kcfg:628
#, kde-format
msgid "Draw Jupiter in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowJupiter), group (View)
#. +> trunk5
#: kstars.kcfg:629
#, kde-format
msgid "Toggle whether Jupiter is drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowSaturn), group (View)
#. +> trunk5
#: kstars.kcfg:633
#, kde-format
msgid "Draw Saturn in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowSaturn), group (View)
#. +> trunk5
#: kstars.kcfg:634
#, kde-format
msgid "Toggle whether Saturn is drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowUranus), group (View)
#. +> trunk5
#: kstars.kcfg:638
#, kde-format
msgid "Draw Uranus in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowUranus), group (View)
#. +> trunk5
#: kstars.kcfg:639
#, kde-format
msgid "Toggle whether Uranus is drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowNeptune), group (View)
#. +> trunk5
#: kstars.kcfg:643
#, kde-format
msgid "Draw Neptune in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowNeptune), group (View)
#. +> trunk5
#: kstars.kcfg:644
#, kde-format
msgid "Toggle whether Neptune is drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowPluto), group (View)
#. +> trunk5
#: kstars.kcfg:648
#, kde-format
msgid "Draw Pluto in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowPluto), group (View)
#. +> trunk5
#: kstars.kcfg:649
#, kde-format
msgid "Toggle whether Pluto is drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowStars), group (View)
#. +> trunk5
#: kstars.kcfg:653
#, kde-format
msgid "Draw stars in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowStars), group (View)
#. +> trunk5
#: kstars.kcfg:654
#, kde-format
msgid "Toggle whether stars are drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowStarMagnitudes), group (View)
#. +> trunk5
#: kstars.kcfg:658
#, kde-format
msgid "Label star magnitudes in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowStarMagnitudes), group (View)
#. +> trunk5
#: kstars.kcfg:659
#, kde-format
msgid "Toggle whether star magnitude (brightness) labels are shown in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowStarNames), group (View)
#. +> trunk5
#: kstars.kcfg:663
#, kde-format
msgid "Label star names in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowStarNames), group (View)
#. +> trunk5
#: kstars.kcfg:664
#, kde-format
msgid "Toggle whether star name labels are shown in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowDeepSkyMagnitudes), group (View)
#. +> trunk5
#: kstars.kcfg:668
#, kde-format
msgid "Label deep-sky object magnitudes in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowDeepSkyMagnitudes), group (View)
#. +> trunk5
#: kstars.kcfg:669
#, kde-format
msgid "Toggle whether deep-sky object magnitude (brightness) labels are shown in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowDeepSkyNames), group (View)
#. +> trunk5
#: kstars.kcfg:673
#, kde-format
msgid "Label deep-sky objects in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowDeepSkyNames), group (View)
#. +> trunk5
#: kstars.kcfg:674
#, kde-format
msgid "Toggle whether deep-sky object name labels are shown in the sky map."
msgstr ""
#. i18n: ectx: label, entry (SlewTimeScale), group (View)
#. +> trunk5
#: kstars.kcfg:678
#, kde-format
msgid "Minimum timescale for forced-slewing mode"
msgstr ""
#. i18n: ectx: whatsthis, entry (SlewTimeScale), group (View)
#. +> trunk5
#: kstars.kcfg:679
#, kde-format
msgid "The timescale above which slewing mode is forced on at all times."
msgstr ""
#. i18n: ectx: label, entry (BoxBGMode), group (View)
#. +> trunk5
#: kstars.kcfg:683
#, kde-format
msgid "InfoBoxes Background fill mode"
msgstr ""
#. i18n: ectx: whatsthis, entry (BoxBGMode), group (View)
#. +> trunk5
#: kstars.kcfg:684
#, kde-format
msgid "The background fill mode for the on-screen information boxes: 0=\"no BG\"; 1=\"semi-transparent BG\"; 2=\"opaque BG\""
msgstr ""
#. i18n: ectx: label, entry (Projection), group (View)
#. +> trunk5
#: kstars.kcfg:688
#, kde-format
msgid "Mapping projection algorithm"
msgstr ""
#. i18n: ectx: whatsthis, entry (Projection), group (View)
#. +> trunk5
#: kstars.kcfg:689
#, kde-format
msgid "Algorithm for the mapping projection."
msgstr ""
#. i18n: ectx: label, entry (UseAbbrevConstellNames), group (View)
#. +> trunk5
#: kstars.kcfg:693
#, kde-format
msgid "Use abbreviated constellation names?"
msgstr ""
#. i18n: ectx: whatsthis, entry (UseAbbrevConstellNames), group (View)
#. +> trunk5
#: kstars.kcfg:694
#, kde-format
msgid "Use official IAU abbreviations for constellation names."
msgstr ""
#. i18n: ectx: label, entry (UseLatinConstellNames), group (View)
#. +> trunk5
#: kstars.kcfg:698
#, kde-format
msgid "Use Latin constellation names?"
msgstr ""
#. i18n: ectx: whatsthis, entry (UseLatinConstellNames), group (View)
#. +> trunk5
#: kstars.kcfg:699
#, kde-format
msgid "Use Latin constellation names."
msgstr ""
#. i18n: ectx: label, entry (UseLocalConstellNames), group (View)
#. +> trunk5
#: kstars.kcfg:703
#, kde-format
msgid "Use localized constellation names?"
msgstr ""
#. i18n: ectx: whatsthis, entry (UseLocalConstellNames), group (View)
#. +> trunk5
#: kstars.kcfg:704
#, kde-format
msgid "Use localized constellation names (if localized names are not available, default to Latin names)."
msgstr ""
#. i18n: ectx: label, entry (UseAltAz), group (View)
#. +> trunk5
#: kstars.kcfg:708
#, kde-format
msgid "Use horizontal coordinate system?"
msgstr ""
#. i18n: ectx: whatsthis, entry (UseAltAz), group (View)
#. +> trunk5
#: kstars.kcfg:709
#, kde-format
msgid "Display the sky with horizontal coordinates (when false, equatorial coordinates will be used)."
msgstr ""
#. i18n: ectx: label, entry (UseAutoLabel), group (View)
#. +> trunk5
#: kstars.kcfg:713
#, kde-format
msgid "Automatically label focused object?"
msgstr ""
#. i18n: ectx: whatsthis, entry (UseAutoLabel), group (View)
#. +> trunk5
#: kstars.kcfg:714
#, kde-format
msgid "Toggle whether a centered object automatically gets a name label attached."
msgstr ""
#. i18n: ectx: label, entry (UseAutoTrail), group (View)
#. +> trunk5
#: kstars.kcfg:718 tools/scriptbuilder.cpp:696
#, kde-format
msgid "Automatically add trail to centered solar system body?"
msgstr ""
#. i18n: ectx: whatsthis, entry (UseAutoTrail), group (View)
#. +> trunk5
#: kstars.kcfg:719
#, kde-format
msgid "Toggle whether a centered solar system object automatically gets a trail attached, as long as it remains centered."
msgstr ""
#. i18n: ectx: label, entry (UseHoverLabel), group (View)
#. +> trunk5
#: kstars.kcfg:723
#, kde-format
msgid "Add temporary label on mouse hover?"
msgstr ""
#. i18n: ectx: whatsthis, entry (UseHoverLabel), group (View)
#. +> trunk5
#: kstars.kcfg:724
#, kde-format
msgid "Toggle whether the object under the mouse cursor gets a transient name label."
msgstr ""
#. i18n: ectx: label, entry (UseRefraction), group (View)
#. +> trunk5
#: kstars.kcfg:728
#, kde-format
msgid "Correct positions for atmospheric refraction?"
msgstr ""
#. i18n: ectx: whatsthis, entry (UseRefraction), group (View)
#. +> trunk5
#: kstars.kcfg:729
#, kde-format
msgid "Toggle whether object positions are corrected for the effects of atmospheric refraction (only applies when horizontal coordinates are used)."
msgstr ""
#. i18n: ectx: label, entry (UseRelativistic), group (View)
#. +> trunk5
#: kstars.kcfg:733
#, kde-format
msgid "Apply relativistic corrections due to the bending of light in sun's gravitational field"
msgstr ""
#. i18n: ectx: whatsthis, entry (UseRelativistic), group (View)
#. +> trunk5
#: kstars.kcfg:734
#, kde-format
msgid "Toggle whether corrections due to bending of light around the sun are taken into account"
msgstr ""
#. i18n: ectx: label, entry (UseAntialias), group (View)
#. +> trunk5
#: kstars.kcfg:738
#, kde-format
msgid "Use antialiasing when drawing the screen?"
msgstr ""
#. i18n: ectx: whatsthis, entry (UseAntialias), group (View)
#. +> trunk5
#: kstars.kcfg:739
#, kde-format
msgid "Toggle whether the sky is rendered using antialiasing. Lines and shapes are smoother with antialiasing, but rendering the screen will take more time."
msgstr ""
#. i18n: ectx: label, entry (ZoomFactor), group (View)
#. +> trunk5
#: kstars.kcfg:743
#, kde-format
msgid "Zoom Factor, in pixels per radian"
msgstr ""
#. i18n: ectx: whatsthis, entry (ZoomFactor), group (View)
#. +> trunk5
#: kstars.kcfg:744
#, kde-format
msgid "The zoom level, measured in pixels per radian."
msgstr ""
#. i18n: ectx: label, entry (ZoomScrollFactor), group (View)
#. +> trunk5
#: kstars.kcfg:750
#, kde-format
msgid "Zoom scroll sensitivity."
msgstr ""
#. i18n: ectx: whatsthis, entry (ZoomScrollFactor), group (View)
#. +> trunk5
#: kstars.kcfg:751
#, kde-format
msgid "When zooming in or out, change zoom speed factor by this multiplier."
msgstr ""
#. i18n: ectx: label, entry (MagLimitAsteroid), group (View)
#. +> trunk5
#: kstars.kcfg:757
#, kde-format
msgid "Faint limit for asteroids"
msgstr ""
#. i18n: ectx: whatsthis, entry (MagLimitAsteroid), group (View)
#. +> trunk5
#: kstars.kcfg:758
#, kde-format
msgid "The faint magnitude limit for drawing asteroids."
msgstr ""
#. i18n: ectx: label, entry (MagLimitAsteroidDownload), group (View)
#. +> trunk5
#: kstars.kcfg:762
#, kde-format
msgid "Maximum magnitude for asteroids to be downloaded from JPL."
msgstr ""
#. i18n: ectx: whatsthis, entry (MagLimitAsteroidDownload), group (View)
#. +> trunk5
#: kstars.kcfg:763
#, kde-format
msgid "The maximum magnitude (visibility) to filter the asteroid data download from JPL."
msgstr ""
#. i18n: ectx: label, entry (AsteroidLabelDensity), group (View)
#. +> trunk5
#: kstars.kcfg:767
#, kde-format
msgid "Label density for asteroid names"
msgstr ""
#. i18n: ectx: whatsthis, entry (AsteroidLabelDensity), group (View)
#. +> trunk5
#: kstars.kcfg:768
#, kde-format
msgid "Controls the relative number of asteroid name labels drawn in the map."
msgstr ""
#. i18n: ectx: label, entry (MagLimitDrawDeepSky), group (View)
#. +> trunk5
#: kstars.kcfg:772
#, kde-format
msgid "Faint limit for deep-sky objects"
msgstr ""
#. i18n: ectx: whatsthis, entry (MagLimitDrawDeepSky), group (View)
#. +> trunk5
#: kstars.kcfg:773
#, kde-format
msgid "The faint magnitude limit for drawing deep-sky objects, when fully zoomed in."
msgstr ""
#. i18n: ectx: label, entry (MagLimitDrawDeepSkyZoomOut), group (View)
#. +> trunk5
#: kstars.kcfg:777
#, kde-format
msgid "Faint limit for deep-sky objects when zoomed out"
msgstr ""
#. i18n: ectx: whatsthis, entry (MagLimitDrawDeepSkyZoomOut), group (View)
#. +> trunk5
#: kstars.kcfg:778
#, kde-format
msgid "The faint magnitude limit for drawing deep-sky objects, when fully zoomed out."
msgstr ""
#. i18n: ectx: label, entry (ShowUnknownMagObjects), group (View)
#. +> trunk5
#: kstars.kcfg:782
#, kde-format
msgid "Show deep-sky objects of unknown magnitude"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowUnknownMagObjects), group (View)
#. +> trunk5
#: kstars.kcfg:783
#, kde-format
msgid "When enabled, objects whose magnitudes are unknown, or not available to KStars, are drawn irrespective of the faint limits set."
msgstr ""
#. i18n: ectx: label, entry (MagLimitDrawStar), group (View)
#. +> trunk5
#: kstars.kcfg:788
#, kde-format
msgid "Faint limit for stars"
msgstr ""
#. i18n: ectx: whatsthis, entry (MagLimitDrawStar), group (View)
#. +> trunk5
#: kstars.kcfg:789
#, kde-format
msgid "The faint magnitude limit for drawing stars, when fully zoomed in."
msgstr ""
#. i18n: ectx: label, entry (StarDensity), group (View)
#. +> trunk5
#: kstars.kcfg:793
#, kde-format
msgid "Density of stars in the field of view"
msgstr ""
#. i18n: ectx: whatsthis, entry (StarDensity), group (View)
#. +> trunk5
#: kstars.kcfg:794
#, kde-format
msgid "Sets the density of stars in the field of view"
msgstr ""
#. i18n: ectx: label, entry (MagLimitDrawStarZoomOut), group (View)
#. +> trunk5
#: kstars.kcfg:799
#, kde-format
msgid "Faint limit for stars when zoomed out"
msgstr ""
#. i18n: ectx: whatsthis, entry (MagLimitDrawStarZoomOut), group (View)
#. +> trunk5
#: kstars.kcfg:800
#, kde-format
msgid "The faint magnitude limit for drawing stars, when fully zoomed out."
msgstr ""
#. i18n: ectx: label, entry (MagLimitHideStar), group (View)
#. +> trunk5
#: kstars.kcfg:805
#, kde-format
msgid "Faint limit for stars when slewing"
msgstr ""
#. i18n: ectx: whatsthis, entry (MagLimitHideStar), group (View)
#. +> trunk5
#: kstars.kcfg:806
#, kde-format
msgid "The faint magnitude limit for drawing stars, when the map is in motion (only applicable if faint stars are set to be hidden while the map is in motion)."
msgstr ""
#. i18n: ectx: label, entry (StarLabelDensity), group (View)
#. +> trunk5
#: kstars.kcfg:810
#, kde-format
msgid "Relative density for star name labels and/or magnitudes"
msgstr ""
#. i18n: ectx: whatsthis, entry (StarLabelDensity), group (View)
#. +> trunk5
#: kstars.kcfg:811
#, kde-format
msgid "The relative density for drawing star name and magnitude labels."
msgstr ""
#. i18n: ectx: label, entry (DeepSkyLabelDensity), group (View)
#. +> trunk5
#: kstars.kcfg:815
#, kde-format
msgid "Relative density for deep-sky object name labels and/or magnitudes"
msgstr ""
#. i18n: ectx: whatsthis, entry (DeepSkyLabelDensity), group (View)
#. +> trunk5
#: kstars.kcfg:816
#, kde-format
msgid "The relative density for drawing deep-sky object name and magnitude labels."
msgstr ""
#. i18n: ectx: label, entry (DeepSkyLongLabels), group (View)
#. +> trunk5
#: kstars.kcfg:820
#, kde-format
msgid "Show long names in deep-sky object name labels?"
msgstr ""
#. i18n: ectx: whatsthis, entry (DeepSkyLongLabels), group (View)
#. +> trunk5
#: kstars.kcfg:821
#, kde-format
msgid "If true, long names (common names) for deep-sky objects are shown in the labels."
msgstr ""
#. i18n: ectx: label, entry (MaxRadCometName), group (View)
#. +> trunk5
#: kstars.kcfg:825
#, kde-format
msgid "Maximum distance from Sun for labeling comets, in AU"
msgstr ""
#. i18n: ectx: whatsthis, entry (MaxRadCometName), group (View)
#. +> trunk5
#: kstars.kcfg:826
#, kde-format
msgid "The maximum solar distance for drawing comets."
msgstr ""
#. i18n: ectx: label, entry (UseGL), group (View)
#. +> trunk5
#: kstars.kcfg:830
#, kde-format
msgid "Switch to OpenGL backend"
msgstr ""
#. i18n: ectx: whatsthis, entry (UseGL), group (View)
#. i18n: ectx: label, entry (RunClock), group (View)
#. +> trunk5
#: kstars.kcfg:835
#, kde-format
msgid "Run clock"
msgstr ""
#. i18n: ectx: whatsthis, entry (RunClock), group (View)
#. +> trunk5
#: kstars.kcfg:836
#, kde-format
msgid "The state of the clock (running or not)"
msgstr ""
#. i18n: ectx: label, entry (ObsListSymbol), group (ObservingList)
#. +> trunk5
#: kstars.kcfg:842
#, kde-format
msgid "Use symbols to label observing list objects"
msgstr ""
#. i18n: ectx: whatsthis, entry (ObsListSymbol), group (ObservingList)
#. +> trunk5
#: kstars.kcfg:843
#, kde-format
msgid "Objects in the observing list will be highlighted with a symbol in the map."
msgstr ""
#. i18n: ectx: label, entry (ObsListText), group (ObservingList)
#. +> trunk5
#: kstars.kcfg:847
#, kde-format
msgid "Use text to label observing list objects"
msgstr ""
#. i18n: ectx: whatsthis, entry (ObsListText), group (ObservingList)
#. +> trunk5
#: kstars.kcfg:848
#, kde-format
msgid "Objects in the observing list will be highlighted with a colored name label in the map."
msgstr ""
#. i18n: ectx: label, entry (ObsListPreferDSS), group (ObservingList)
#. +> trunk5
#: kstars.kcfg:852
#, kde-format
msgid "Prefer Digitized Sky Survey imagery in the observing list"
msgstr ""
#. i18n: ectx: whatsthis, entry (ObsListPreferDSS), group (ObservingList)
#. +> trunk5
#: kstars.kcfg:853
#, kde-format
msgid "The observing list will prefer DSS imagery while downloading imagery."
msgstr ""
#. i18n: ectx: label, entry (ObsListPreferSDSS), group (ObservingList)
#. +> trunk5
#: kstars.kcfg:857
#, kde-format
msgid "Prefer Sloan Digital Sky Survey imagery in the observing list"
msgstr ""
#. i18n: ectx: whatsthis, entry (ObsListPreferSDSS), group (ObservingList)
#. +> trunk5
#: kstars.kcfg:858
#, kde-format
msgid "The observing list will prefer SDSS imagery while downloading imagery."
msgstr ""
#. i18n: ectx: label, entry (ObsListDemoteHole), group (ObservingList)
#. +> trunk5
#: kstars.kcfg:862
#, kde-format
msgid "While sorting by percentage altitude in the observing list, demote objects present in the Dobsonian hole"
msgstr ""
#. i18n: ectx: whatsthis, entry (ObsListDemoteHole), group (ObservingList)
#. +> trunk5
#: kstars.kcfg:863
#, kde-format
msgid "Check this if you use a large Dobsonian telescope. Sorting by percentage current altitude is an easy way of determining what objects are well-placed for observation. However, when using a large Dobsonian telescope, objects close to the zenith are hard to observe. Since tracking there corresponds to a rotation in azimuth, it is both counterintuitive and requires the observer to frequently move the ladder. The region around the zenith where this is particularly frustrating is called the Dobsonian hole. This checkbox makes the observing list consider objects present in the hole as unfit for observation."
msgstr ""
#. i18n: ectx: label, entry (ObsListHoleSize), group (ObservingList)
#. +> trunk5
#: kstars.kcfg:867
#, kde-format
msgid "This is the angular distance from the zenith, in degrees, below which you can easily point your telescope."
msgstr ""
#. i18n: ectx: whatsthis, entry (ObsListHoleSize), group (ObservingList)
#. +> trunk5
#: kstars.kcfg:868
#, kde-format
msgid "This specifies the angular radius of the Dobsonian hole, i.e. the region where a large Dobsonian telescope cannot be pointed easily."
msgstr ""
#. i18n: ectx: label, entry (ColorSchemeFile), group (Colors)
#. i18n: ectx: whatsthis, entry (ColorSchemeFile), group (Colors)
#. +> trunk5
#: kstars.kcfg:874 kstars.kcfg:875
#, kde-format
msgid "The name of the color scheme"
msgstr ""
#. i18n: ectx: label, entry (StarColorMode), group (Colors)
#. +> trunk5
#: kstars.kcfg:879
#, kde-format
msgid "Mode for rendering stars"
msgstr ""
#. i18n: ectx: whatsthis, entry (StarColorMode), group (Colors)
#. +> trunk5
#: kstars.kcfg:880
#, kde-format
msgid "The method for rendering stars: 0=\"realistic colors\"; 1=\"solid red\"; 2=\"solid black\"; 3=\"solid white\"; 4=\"solid real colors\""
msgstr ""
#. i18n: ectx: label, entry (StarColorIntensity), group (Colors)
#. +> trunk5
#: kstars.kcfg:885
#, kde-format
msgid "Saturation level of star colors"
msgstr ""
#. i18n: ectx: whatsthis, entry (StarColorIntensity), group (Colors)
#. +> trunk5
#: kstars.kcfg:886
#, kde-format
msgid "The color saturation level of stars (only applicable when using \"realistic colors\" mode)."
msgstr ""
#. i18n: ectx: label, entry (AngularRulerColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:891
#, kde-format
msgid "Color of angular distance ruler"
msgstr ""
#. i18n: ectx: whatsthis, entry (AngularRulerColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:892
#, kde-format
msgid "The color for the angular-distance measurement ruler."
msgstr ""
#. i18n: ectx: label, entry (BoxBGColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:896
#, kde-format
msgid "Background color of InfoBoxes"
msgstr ""
#. i18n: ectx: whatsthis, entry (BoxBGColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:897
#, kde-format
msgid "The background color of the on-screen information boxes."
msgstr ""
#. i18n: ectx: label, entry (BoxGrabColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:901
#, kde-format
msgid "Text color of InfoBoxes when grabbed with mouse"
msgstr ""
#. i18n: ectx: whatsthis, entry (BoxGrabColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:902
#, kde-format
msgid "The text color for the on-screen information boxes, when activated by a mouse click."
msgstr ""
#. i18n: ectx: label, entry (BoxTextColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:906
#, kde-format
msgid "Text color of InfoBoxes"
msgstr ""
#. i18n: ectx: whatsthis, entry (BoxTextColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:907
#, kde-format
msgid "The normal text color of the on-screen information boxes."
msgstr ""
#. i18n: ectx: label, entry (CBoundColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:911
#, kde-format
msgid "Color of constellation boundaries"
msgstr ""
#. i18n: ectx: whatsthis, entry (CBoundColor), group (Colors)
#. i18n: ectx: whatsthis, entry (CBoundHighColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:912 kstars.kcfg:917
#, kde-format
msgid "The color for the constellation boundary lines."
msgstr ""
#. i18n: ectx: label, entry (CBoundHighColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:916
#, kde-format
msgid "Color of highlighted constellation boundary"
msgstr ""
#. i18n: ectx: label, entry (CLineColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:921
#, kde-format
msgid "Color of constellation lines"
msgstr ""
#. i18n: ectx: whatsthis, entry (CLineColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:922
#, kde-format
msgid "The color for the constellation figure lines."
msgstr ""
#. i18n: ectx: label, entry (CNameColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:926
#, kde-format
msgid "Color of constellation names"
msgstr ""
#. i18n: ectx: whatsthis, entry (CNameColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:927
#, kde-format
msgid "The color for the constellation names."
msgstr ""
#. i18n: ectx: label, entry (CompassColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:931
#, kde-format
msgid "Color of cardinal compass labels along horizon"
msgstr ""
#. i18n: ectx: whatsthis, entry (CompassColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:932
#, kde-format
msgid "The color for the cardinal compass point labels."
msgstr ""
#. i18n: ectx: label, entry (EclipticColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:936
#, kde-format
msgid "Color of ecliptic line"
msgstr ""
#. i18n: ectx: whatsthis, entry (EclipticColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:937
#, kde-format
msgid "The color for the ecliptic line."
msgstr ""
#. i18n: ectx: label, entry (EquatorColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:941
#, kde-format
msgid "Color of equator line"
msgstr ""
#. i18n: ectx: whatsthis, entry (EquatorColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:942
#, kde-format
msgid "The color for the equator line."
msgstr ""
#. i18n: ectx: label, entry (EquatorialGridColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:946
#, kde-format
msgid "Color of equatorial coordinate grid lines"
msgstr ""
#. i18n: ectx: whatsthis, entry (EquatorialGridColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:947
#, kde-format
msgid "The color for the equatorial coordinate grid lines."
msgstr ""
#. i18n: ectx: label, entry (HorizontalGridColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:951
#, kde-format
msgid "Color of horizontal coordinate grid lines"
msgstr ""
#. i18n: ectx: whatsthis, entry (HorizontalGridColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:952
#, kde-format
msgid "The color for the horizontal coordinate grid lines."
msgstr ""
#. i18n: ectx: label, entry (SpecialObjectColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:956
#, kde-format
msgid "Color of objects with extra links available"
msgstr ""
#. i18n: ectx: whatsthis, entry (SpecialObjectColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:957
#, kde-format
msgid "The color for objects which have extra URL links available."
msgstr ""
#. i18n: ectx: label, entry (HorizonColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:961
#, kde-format
msgid "Color of horizon line"
msgstr ""
#. i18n: ectx: whatsthis, entry (HorizonColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:962
#, kde-format
msgid "The color for the horizon line and opaque ground."
msgstr ""
#. i18n: ectx: label, entry (LocalMeridianColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:966
#, kde-format
msgid "Color of local meridian line"
msgstr ""
#. i18n: ectx: whatsthis, entry (LocalMeridianColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:967
#, kde-format
msgid "The color for the local meridian line."
msgstr ""
#. i18n: ectx: label, entry (MessierColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:971
#, kde-format
msgid "Color of Messier objects"
msgstr ""
#. i18n: ectx: whatsthis, entry (MessierColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:972
#, kde-format
msgid "The color for Messier object symbols."
msgstr ""
#. i18n: ectx: label, entry (NGCColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:976
#, kde-format
msgid "Color of NGC objects"
msgstr ""
#. i18n: ectx: whatsthis, entry (NGCColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:977
#, kde-format
msgid "The color for NGC object symbols."
msgstr ""
#. i18n: ectx: label, entry (ICColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:981
#, kde-format
msgid "Color of IC objects"
msgstr ""
#. i18n: ectx: whatsthis, entry (ICColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:982
#, kde-format
msgid "The color for IC object symbols."
msgstr ""
#. i18n: ectx: label, entry (MilkyWayWColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:986
#, kde-format
msgid "Color of Milky Way contour"
msgstr ""
#. i18n: ectx: whatsthis, entry (MilkyWayWColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:987
#, kde-format
msgid "The color for the Milky Way contour."
msgstr ""
#. i18n: ectx: label, entry (StarNameColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:991
#, kde-format
msgid "Color of star name labels"
msgstr ""
#. i18n: ectx: whatsthis, entry (StarNameColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:992
#, kde-format
msgid "The color for star name labels."
msgstr ""
#. i18n: ectx: label, entry (DeepSkyNameColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:996
#, kde-format
msgid "Color of deep-sky object name labels"
msgstr ""
#. i18n: ectx: whatsthis, entry (DeepSkyNameColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:997
#, kde-format
msgid "The color for deep-sky object name labels."
msgstr ""
#. i18n: ectx: label, entry (PlanetNameColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1001
#, kde-format
msgid "Color of planet name labels"
msgstr ""
#. i18n: ectx: whatsthis, entry (PlanetNameColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1002
#, kde-format
msgid "The color for solar system object labels."
msgstr ""
#. i18n: ectx: label, entry (PlanetTrailColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1006
#, kde-format
msgid "Color of planet trails"
msgstr ""
#. i18n: ectx: whatsthis, entry (PlanetTrailColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1007
#, kde-format
msgid "The color for solar system object trails."
msgstr ""
#. i18n: ectx: label, entry (SkyColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1011
#, kde-format
msgid "Color of sky"
msgstr ""
#. i18n: ectx: whatsthis, entry (SkyColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1012
#, kde-format
msgid "The color for the sky background."
msgstr ""
#. i18n: ectx: label, entry (ArtificialHorizonColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1016
#, kde-format
msgid "Color Artificial Horizon"
msgstr ""
#. i18n: ectx: whatsthis, entry (ArtificialHorizonColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1017
#, kde-format
msgid "The color for the artificial horizon region."
msgstr ""
#. i18n: ectx: label, entry (TelescopeTargetColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1021
#, kde-format
msgid "Color of telescope symbols"
msgstr ""
#. i18n: ectx: whatsthis, entry (TelescopeTargetColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1022
#, kde-format
msgid "The color for telescope target symbols."
msgstr ""
#. i18n: ectx: label, entry (VisibleSatColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1026
#, kde-format
msgid "Color of visible satellites"
msgstr ""
#. i18n: ectx: whatsthis, entry (VisibleSatColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1027
#, kde-format
msgid "Color of visible satellites."
msgstr ""
#. i18n: ectx: label, entry (SatColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1031
#, kde-format
msgid "Color of invisible satellites"
msgstr ""
#. i18n: ectx: whatsthis, entry (SatColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1032
#, kde-format
msgid "Color of invisible satellites."
msgstr ""
#. i18n: ectx: label, entry (SatLabelColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1036
#, kde-format
msgid "Color of satellites labels"
msgstr ""
#. i18n: ectx: whatsthis, entry (SatLabelColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1037
#, kde-format
msgid "Color of satellites labels."
msgstr ""
#. i18n: ectx: label, entry (SupernovaColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1041
#, kde-format
msgid "Color of supernovae"
msgstr ""
#. i18n: ectx: whatsthis, entry (SupernovaColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1042
#, kde-format
msgid "Color of supernova"
msgstr ""
#. i18n: ectx: label, entry (UserLabelColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1046
#, kde-format
msgid "Color of user-added labels"
msgstr ""
#. i18n: ectx: whatsthis, entry (UserLabelColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1047
#, kde-format
msgid "The color for user-added object labels."
msgstr ""
#. i18n: ectx: label, entry (RAGuideColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1051
#, kde-format
msgid "Color of RA Guide Error"
msgstr ""
#. i18n: ectx: whatsthis, entry (RAGuideColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1052
#, kde-format
msgid "The color for RA Guide Error bar in Ekos guide module."
msgstr ""
#. i18n: ectx: label, entry (DEGuideColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1056
#, kde-format
msgid "Color of DEC Guide Error"
msgstr ""
#. i18n: ectx: whatsthis, entry (DEGuideColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1057
#, kde-format
msgid "The color for DEC Guide Error bar in Ekos guide module."
msgstr ""
#. i18n: ectx: label, entry (SolverFOVColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1061
#, kde-format
msgid "Color of solver FOV box"
msgstr ""
#. i18n: ectx: whatsthis, entry (SolverFOVColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1062
#, kde-format
msgid "The color for solver FOV box in Ekos alignment module."
msgstr ""
#. i18n: ectx: label, entry (xplanetIsInternal), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1068 xplanet/opsxplanet.cpp:30
#, kde-format
msgid "Internal or External XPlanet?"
msgstr ""
#. i18n: ectx: label, entry (XplanetPath), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1072
#, kde-format
msgid "Path to xplanet binary"
msgstr ""
#. i18n: ectx: whatsthis, entry (XplanetPath), group (Xplanet)
#. i18n: ectx: whatsthis, entry (XplanetLabel), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1103
#, kde-format
msgid "If true, display a label in the upper right corner."
msgstr ""
#. i18n: ectx: label, entry (XplanetLabelLocalTime), group (Xplanet)
#. i18n: ectx: label, entry (XplanetLabelGMT), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1107 kstars.kcfg:1112
#, kde-format
msgid "Show GMT label"
msgstr ""
#. i18n: ectx: whatsthis, entry (XplanetLabelLocalTime), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1108
#, kde-format
msgid "Show local time."
msgstr ""
#. i18n: ectx: whatsthis, entry (XplanetLabelGMT), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1113
#, kde-format
msgid "Show GMT instead of local time."
msgstr ""
#. i18n: ectx: label, entry (XplanetLabelString), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1117
#, kde-format
msgid "Planet string"
msgstr ""
#. i18n: ectx: whatsthis, entry (XplanetLabelString), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1118
#, kde-format, no-c-format
msgid "Specify the text of the first line of the label. By default, it says something like \"Looking at Earth\". Any instances of %t will be replaced by the target name, and any instances of %o will be replaced by the origin name."
msgstr ""
#. i18n: ectx: label, entry (XplanetFontSize), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1122
#, kde-format
msgid "Font Size"
msgstr ""
#. i18n: ectx: whatsthis, entry (XplanetFontSize), group (Xplanet)
#. i18n: ectx: label, entry (XplanetDateFormat), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1132
#, kde-format
msgid "Date format"
msgstr ""
#. i18n: ectx: whatsthis, entry (XplanetDateFormat), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1133
#, kde-format, no-c-format
msgid "Specify the format for the date/time label. This format string is passed to strftime(3). The default is \"%c %Z\", which shows the date, time, and time zone in the locale’s appropriate date and time representation."
msgstr ""
#. i18n: ectx: label, entry (XplanetLabelTL), group (Xplanet)
#. i18n: ectx: whatsthis, entry (XplanetLongitude), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1174
#, kde-format
msgid "Place the observer above the specified longitude (in degrees). Longitude is positive going east, negative going west (for the earth and moon), so for example Los Angeles is at -118 or 242. The default value is 0."
msgstr ""
#. i18n: ectx: label, entry (XplanetProjection), group (Xplanet)
#. i18n: ectx: whatsthis, entry (XplanetBackground), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1184
#, kde-format
msgid "Use a file as the background image, with the planet to be superimposed upon it. This option is only meaningful with the -projection option. A color may also be supplied."
msgstr ""
#. i18n: ectx: label, entry (XplanetBackgroundImage), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1188
#, kde-format
msgid "Use background image"
msgstr ""
#. i18n: ectx: whatsthis, entry (XplanetBackgroundImage), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1189
#, kde-format
msgid "Use a file as the background image."
msgstr ""
#. i18n: ectx: label, entry (XplanetBackgroundImagePath), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1193
#, kde-format
msgid "Background image path"
msgstr ""
#. i18n: ectx: whatsthis, entry (XplanetBackgroundImagePath), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1194
#, kde-format
msgid "The path of the background image."
msgstr ""
#. i18n: ectx: label, entry (XplanetBackgroundColor), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1198
#, kde-format
msgid "Use background color"
msgstr ""
#. i18n: ectx: whatsthis, entry (XplanetBackgroundColor), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1199
#, kde-format
msgid "Use a color as the background."
msgstr ""
#. i18n: ectx: label, entry (XplanetBackgroundColorValue), group (Xplanet)
msgid "A star of the specified magnitude will have a pixel brightness of 1. The default value is 10. Stars will be drawn more brightly if this number is larger."
msgstr ""
#. i18n: ectx: label, entry (XplanetArcFile), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1213
#, kde-format
msgid "Arc file"
msgstr ""
#. i18n: ectx: whatsthis, entry (XplanetArcFile), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1214
#, kde-format
msgid "If checked, use an arc file to be plotted against the background stars."
msgstr ""
#. i18n: ectx: label, entry (XplanetArcFilePath), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1218
#, kde-format
msgid "Path to arc file"
msgstr ""
#. i18n: ectx: whatsthis, entry (XplanetArcFilePath), group (Xplanet)
#. i18n: ectx: whatsthis, entry (AlwaysRecomputeCoordinates), group (General)
#. +> trunk5
#: kstars.kcfg:1302
#, kde-format
msgid "Checking this option causes recomputation of current equatorial coordinates from catalog coordinates (i.e. application of precession, nutation and aberration corrections) for every redraw of the map. This makes processing slower when there are many stars to handle, but is more likely to be bug free. There are known bugs in the rendering of stars when this recomputation is avoided."
msgstr ""
#. i18n: ectx: label, entry (DefaultDSSImageSize), group (General)
#. +> trunk5
#: kstars.kcfg:1306
#, kde-format
msgid "Default size for DSS images"
msgstr ""
#. i18n: ectx: whatsthis, entry (DefaultDSSImageSize), group (General)
#. +> trunk5
#: kstars.kcfg:1307
#, kde-format
msgid "The default size for DSS images downloaded from the Internet."
msgstr ""
#. i18n: ectx: label, entry (DSSPadding), group (General)
#. +> trunk5
#: kstars.kcfg:1311
#, kde-format
msgid "Additional padding around DSS Images of deep-sky objects"
msgstr ""
#. i18n: ectx: whatsthis, entry (DSSPadding), group (General)
#. +> trunk5
#: kstars.kcfg:1312
#, kde-format
msgid "To include parts of the star field, we add some extra padding around DSS images of deep-sky objects. This option configures the total (both sides) padding added to either dimension of the field."
msgstr ""
#. i18n: ectx: label, entry (VerboseLogging), group (General)
#. +> trunk5
#: kstars.kcfg:1316
#, kde-format
msgid "Enable Verbose Logging"
msgstr ""
#. i18n: ectx: whatsthis, entry (VerboseLogging), group (General)
#. +> trunk5
#: kstars.kcfg:1317
#, kde-format
msgid "Checking this option causes KStars to generate verbose debug information for diagnostic purposes. This may cause slowdown of KStars."
msgstr ""
#. i18n: ectx: label, entry (RegularLogging), group (General)
#. +> trunk5
#: kstars.kcfg:1321
#, kde-format
msgid "Enable Regular Logging"
msgstr ""
#. i18n: ectx: whatsthis, entry (RegularLogging), group (General)
#. +> trunk5
#: kstars.kcfg:1322
#, kde-format
msgid "Checking this option causes KStars to generate regular debug information."
msgstr ""
#. i18n: ectx: label, entry (DisableLogging), group (General)
#. +> trunk5
#: kstars.kcfg:1326
#, kde-format
msgid "Disable Verbose Logging"
msgstr ""
#. i18n: ectx: whatsthis, entry (DisableLogging), group (General)
#. +> trunk5
#: kstars.kcfg:1327
#, kde-format
msgid "Checking this option causes KStars to stop generating ANY debug information."
msgstr ""
#. i18n: ectx: label, entry (LogToDefault), group (General)
#. +> trunk5
#: kstars.kcfg:1331
#, kde-format
msgid "Log debug message to default output"
msgstr ""
#. i18n: ectx: whatsthis, entry (LogToDefault), group (General)
#. +> trunk5
#: kstars.kcfg:1332
#, kde-format
msgid "Checking this option causes KStars log debug messages to the default output used by the platform (e.g. Standard Error)."
msgstr ""
#. i18n: ectx: label, entry (LogToFile), group (General)
#. +> trunk5
#: kstars.kcfg:1336
#, kde-format
msgid "Log debug message to a log file"
msgstr ""
#. i18n: ectx: whatsthis, entry (LogToFile), group (General)
#. +> trunk5
#: kstars.kcfg:1337
#, kde-format
msgid "Checking this option causes KStars log debug messages to a log file as specified."
msgstr ""
#. i18n: ectx: whatsthis, entry (FITSLogging), group (General)
#. +> trunk5
#: kstars.kcfg:1341
#, kde-format
msgid "Log FITS Data activity."
msgstr ""
#. i18n: ectx: whatsthis, entry (INDILogging), group (General)
#. +> trunk5
#: kstars.kcfg:1345
#, kde-format
msgid "Log INDI devices activity."
msgstr ""
#. i18n: ectx: whatsthis, entry (CaptureLogging), group (General)
#. +> trunk5
#: kstars.kcfg:1349
#, kde-format
msgid "Log Ekos Capture Module activity."
msgstr ""
#. i18n: ectx: whatsthis, entry (FocusLogging), group (General)
#. +> trunk5
#: kstars.kcfg:1353
#, kde-format
msgid "Log Ekos Focus Module activity."
msgstr ""
#. i18n: ectx: whatsthis, entry (GuideLogging), group (General)
#. +> trunk5
#: kstars.kcfg:1357
#, kde-format
msgid "Log Ekos Guide Module activity."
msgstr ""
#. i18n: ectx: whatsthis, entry (AlignmentLogging), group (General)
#. +> trunk5
#: kstars.kcfg:1361
#, kde-format
msgid "Log Ekos Alignment Module activity."
msgstr ""
#. i18n: ectx: whatsthis, entry (MountLogging), group (General)
#. +> trunk5
#: kstars.kcfg:1365
#, kde-format
msgid "Log Ekos Mount Module activity."
msgstr ""
#. i18n: ectx: label, entry (useFITSViewer), group (FITSViewer)
#. +> trunk5
#: kstars.kcfg:1371
#, kde-format
msgid "Display every image captured in a FITS Viewer window."
msgstr ""
#. i18n: ectx: label, entry (singlePreviewFITS), group (FITSViewer)
#. +> trunk5
#: kstars.kcfg:1375
#, kde-format
msgid "Preview FITS in a single tab?"
msgstr ""
#. i18n: ectx: label, entry (singleWindowCapturedFITS), group (FITSViewer)
#. +> trunk5
#: kstars.kcfg:1380
#, kde-format
msgid "Display all captured FITS in one window?"
msgstr ""
#. i18n: ectx: whatsthis, entry (singleWindowCapturedFITS), group (FITSViewer)
#. +> trunk5
#: kstars.kcfg:1381
#, kde-format
msgid "Display all captured FITS images in a single FITS Viewer window. By default each camera create its own FITS Viewer instance"
msgstr ""
#. i18n: ectx: label, entry (singleWindowOpenedFITS), group (FITSViewer)
#. +> trunk5
#: kstars.kcfg:1385
#, kde-format
msgid "Display all opened FITS in one window?"
msgstr ""
#. i18n: ectx: whatsthis, entry (singleWindowOpenedFITS), group (FITSViewer)
#. +> trunk5
#: kstars.kcfg:1386
#, kde-format
msgid "Display all opened FITS images in a single FITS Viewer window."
msgstr ""
#. i18n: ectx: label, entry (independentWindowFITS), group (FITSViewer)
#. +> trunk5
#: kstars.kcfg:1390
#, kde-format
msgid "Make FITS Viewer window independent of KStars main window"
msgstr ""
#. i18n: ectx: label, entry (AutoDebayer), group (FITSViewer)
#. +> trunk5
#: kstars.kcfg:1394
#, kde-format
msgid "Automatically debayer a FITS image if it is contains a bayer pattern"
msgstr ""
#. i18n: ectx: label, entry (Auto3DCube), group (FITSViewer)
#. +> trunk5
#: kstars.kcfg:1398
#, kde-format
msgid "Process 3D FITS Cube (RGB). If false, only first channel is processed."
msgstr ""
#. i18n: ectx: label, entry (AutoWCS), group (FITSViewer)
#. +> trunk5
#: kstars.kcfg:1402
#, kde-format
msgid "Automatically process World-Coordinate-System (WCS) data when loading a FITS file."
msgstr ""
#. i18n: ectx: label, entry (LimitedResourcesMode), group (FITSViewer)
#. +> trunk5
#: kstars.kcfg:1406
#, kde-format
msgid "Conserve CPU and memory by disabling all resource-intensive features in FITS Viewer"
msgstr ""
#. i18n: ectx: label, entry (BortleClass), group (WISettings)
#. +> trunk5
#: kstars.kcfg:1412
#, kde-format
msgid "Bortle dark-sky rating"
msgstr ""
#. i18n: ectx: label, entry (TelescopeCheck), group (WISettings)
#. +> trunk5
#: kstars.kcfg:1416
#, kde-format
msgid "Availability of telescope"
msgstr ""
#. i18n: ectx: label, entry (BinocularsCheck), group (WISettings)
#. +> trunk5
#: kstars.kcfg:1420
#, kde-format
msgid "Availability of binoculars"
msgstr ""
#. i18n: ectx: label, entry (BinocularsAperture), group (WISettings)
#. +> trunk5
#: kstars.kcfg:1424
#, kde-format
msgid "Aperture of available binocular"
msgstr ""
#. i18n: ectx: label, entry (ScopeListIndex), group (WISettings)
#. +> trunk5
#: kstars.kcfg:1428
#, kde-format
msgid "Index of selected scope from list of scopes"
msgstr ""
#. i18n: ectx: label, entry (EkosWindowWidth), group (Ekos)
#. +> trunk5
#: kstars.kcfg:1434
#, kde-format
msgid "Ekos window width"
msgstr ""
#. i18n: ectx: label, entry (EkosWindowHeight), group (Ekos)
#. +> trunk5
#: kstars.kcfg:1438
#, kde-format
msgid "Ekos window height"
msgstr ""
#. i18n: ectx: label, entry (EkosLeftIcons), group (Ekos)
#. +> trunk5
#: kstars.kcfg:1446
#, kde-format
msgid "Ekos modules icons are placed to the left of pages"
msgstr ""
#. i18n: ectx: label, entry (RememberCredentials), group (Ekos)
#. +> trunk5
#: kstars.kcfg:1450
#, kde-format
msgid "Remember Ekos Live credentials."
msgstr ""
#. i18n: ectx: label, entry (independentWindowEkos), group (Ekos)
#. +> trunk5
#: kstars.kcfg:1454
#, kde-format
msgid "Make Ekos window independent of KStars main window"
msgstr ""
#. i18n: ectx: label, entry (profile), group (Ekos)
#. +> trunk5
#: kstars.kcfg:1458
#, kde-format
msgid "Ekos drivers profile"
msgstr ""
#. i18n: ectx: label, entry (neverLoadConfig), group (Ekos)
#. +> trunk5
#: kstars.kcfg:1462
#, kde-format
msgid "Never load device configuration?"
msgstr ""
#. i18n: ectx: label, entry (loadConfigOnConnection), group (Ekos)
#. +> trunk5
#: kstars.kcfg:1466
#, kde-format
msgid "Load device configuration upon successful connection?"
msgstr ""
#. i18n: ectx: label, entry (loadDefaultConfig), group (Ekos)
#. +> trunk5
#: kstars.kcfg:1470
#, kde-format
msgid "Always load device default configuration upon successful connection?"
msgstr ""
#. i18n: ectx: label, entry (shutterfulCCDs), group (DarkLibrary)
#. +> trunk5
#: kstars.kcfg:1480
#, kde-format
msgid "List of CCDs with mechanical or electronic shutters."
msgstr ""
#. i18n: ectx: label, entry (shutterlessCCDs), group (DarkLibrary)
#. +> trunk5
#: kstars.kcfg:1483
#, kde-format
msgid "List of CCDs without mechanical or electronic shutters."
msgstr ""
#. i18n: ectx: label, entry (MinimumAltLimit), group (Mount)
#. +> trunk5
#: kstars.kcfg:1488
#, kde-format
msgid "Default minimum mount altitude limit"
msgstr ""
#. i18n: ectx: label, entry (MaximumAltLimit), group (Mount)
#. +> trunk5
#: kstars.kcfg:1493
#, kde-format
msgid "Default maximum mount altitude limit."
msgstr ""
#. i18n: ectx: whatsthis, entry (MaximumAltLimit), group (Mount)
#. +> trunk5
#: kstars.kcfg:1494
#, kde-format
msgid "Maximum telescope altitude limit. If the telescope is above this limit, it will be commanded to stop."
msgstr ""
#. i18n: ectx: label, entry (EnableAltitudeLimits), group (Mount)
#. +> trunk5
#: kstars.kcfg:1498
#, kde-format
msgid "Enable mount altitude limits."
msgstr ""
#. i18n: ectx: label, entry (DefaultCaptureCCD), group (Capture)
#. +> trunk5
#: kstars.kcfg:1504
#, kde-format
msgid "Default capture module CCD."
msgstr ""
#. i18n: ectx: label, entry (DefaultObserver), group (Capture)
#. +> trunk5
#: kstars.kcfg:1507
#, kde-format
msgid "Default observer full name."
msgstr ""
#. i18n: ectx: label, entry (SyncFOVPA), group (Capture)
#. +> trunk5
#: kstars.kcfg:1510
#, kde-format
msgid "Sync FOV indicator Position Angle with Rotator Settings Position Angle"
msgstr ""
#. i18n: ectx: label, entry (PAMultiplier), group (Capture)
#. +> trunk5
#: kstars.kcfg:1514
#, kde-format
msgid "Position angle multiplier"
msgstr ""
#. i18n: ectx: label, entry (PAOffset), group (Capture)
#. +> trunk5
#: kstars.kcfg:1518
#, kde-format
msgid "Position angle offset"
msgstr ""
#. i18n: ectx: label, entry (GuideDeviation), group (Capture)
#. +> trunk5
#: kstars.kcfg:1522
#, kde-format
msgid "Default maximum permittable guide deviation"
msgstr ""
#. i18n: ectx: whatsthis, entry (GuideDeviation), group (Capture)
#. +> trunk5
#: kstars.kcfg:1523
#, kde-format
msgid "If guide deviation exceeds this limit, the exposure will be automatically aborted and only resumed when the deviation is within this limit."
msgstr ""
#. i18n: ectx: label, entry (HFRDeviation), group (Capture)
#. +> trunk5
#: kstars.kcfg:1527
#, kde-format
msgid "Default maximum permittable HFR deviation"
msgstr ""
#. i18n: ectx: whatsthis, entry (HFRDeviation), group (Capture)
#. +> trunk5
#: kstars.kcfg:1528
#, kde-format
msgid "If HFR deviation exceeds this limit, the autofocus routine will be automatically started."
msgstr ""
#. i18n: ectx: label, entry (EnforceGuideDeviation), group (Capture)
#. +> trunk5
#: kstars.kcfg:1532
#, kde-format
msgid "Enforce guiding deviation limit."
msgstr ""
#. i18n: ectx: label, entry (EnforceAutofocus), group (Capture)
#. +> trunk5
#: kstars.kcfg:1536
#, kde-format
msgid "Enforce Autofocus HFR limit."
msgstr ""
#. i18n: ectx: label, entry (EnforceRefocusEveryN), group (Capture)
#. +> trunk5
#: kstars.kcfg:1540
#, kde-format
msgid "Enforce Refocus Every N Minutes."
msgstr ""
#. i18n: ectx: label, entry (RefocusEveryN), group (Capture)
#. +> trunk5
#: kstars.kcfg:1544
#, kde-format
msgid "Number of minute between forced refocus attempts"
msgstr ""
#. i18n: ectx: whatsthis, entry (RefocusEveryN), group (Capture)
#. +> trunk5
#: kstars.kcfg:1545
#, kde-format
msgid "Sets the time interval before forced autofocus attempts during a capture sequence."
msgstr ""
#. i18n: ectx: label, entry (AutoMeridianHours), group (Capture)
#. +> trunk5
#: kstars.kcfg:1549
#, kde-format
msgid "Default hour angle to perform meridian flip"
msgstr ""
#. i18n: ectx: whatsthis, entry (AutoMeridianHours), group (Capture)
#. +> trunk5
#: kstars.kcfg:1550
#, kde-format
msgid "If the target hour angle exceeds this value, Ekos will command a meridian flip and if successful it will resume guiding and capture operations."
msgstr ""
#. i18n: ectx: label, entry (AutoMeridianFlip), group (Capture)
#. +> trunk5
#: kstars.kcfg:1553
#, kde-format
msgid "Flips the mount when reaching the meridian, if supported."
msgstr ""
#. i18n: ectx: label, entry (ResetMountModelAfterMeridian), group (Capture)
#. +> trunk5
#: kstars.kcfg:1557
#, kde-format
msgid "Reset mount model after meridian flip."
msgstr ""
#. i18n: ectx: label, entry (CalibrationADUValue), group (Capture)
#. +> trunk5
#: kstars.kcfg:1561
#, kde-format
msgid "Desired flat field ADU"
msgstr ""
#. i18n: ectx: whatsthis, entry (CalibrationADUValue), group (Capture)
#. +> trunk5
#: kstars.kcfg:1562
#, kde-format
msgid "If set, Ekos will capture a few flat images to determine the optimal exposure time to achieve the desired ADU value."
msgstr ""
#. i18n: ectx: label, entry (CalibrationADUValueTolerance), group (Capture)
#. +> trunk5
#: kstars.kcfg:1566
#, kde-format
msgid "ADU Value tolerance"
msgstr ""
#. i18n: ectx: whatsthis, entry (CalibrationADUValueTolerance), group (Capture)
#. +> trunk5
#: kstars.kcfg:1567
#, kde-format
msgid "Maximum difference between measured and target ADU values to deem the value as acceptable."
msgstr ""
#. i18n: ectx: label, entry (CalibrationFlatSourceIndex), group (Capture)
#. +> trunk5
#: kstars.kcfg:1571
#, kde-format
msgid "Index of flat source option."
msgstr ""
#. i18n: ectx: label, entry (CalibrationFlatDurationIndex), group (Capture)
#. +> trunk5
#: kstars.kcfg:1575
#, kde-format
msgid "Index of flat duration option."
msgstr ""
#. i18n: ectx: label, entry (CalibrationWallAz), group (Capture)
#. +> trunk5
#: kstars.kcfg:1579
#, kde-format
msgid "Azimuth of calibration wall location."
msgstr ""
#. i18n: ectx: label, entry (CalibrationWallAlt), group (Capture)
#. +> trunk5
#: kstars.kcfg:1583
#, kde-format
msgid "Altitude of calibration wall location."
msgstr ""
#. i18n: ectx: label, entry (MaxTemperatureDiff), group (Capture)
#. +> trunk5
#: kstars.kcfg:1587
#, kde-format
msgid "Maximum acceptable difference between requested and measured temperature set point."
msgstr ""
#. i18n: ectx: label, entry (GuidingSettle), group (Capture)
#. +> trunk5
#: kstars.kcfg:1591
#, kde-format
msgid "Wait this many seconds after guiding is resumed before starting capture."
msgstr ""
#. i18n: ectx: label, entry (RememberJobProgress), group (Capture)
#. +> trunk5
#: kstars.kcfg:1595
#, kde-format
msgid "When starting a new capture job, check if files were previously captured and resume capture afterwards."
msgstr ""
#. i18n: ectx: label, entry (FlatSyncFocus), group (Capture)
#. +> trunk5
#: kstars.kcfg:1599
#, kde-format
msgid "Capture flat frames at the same focus position of light frames."
msgstr ""
#. i18n: ectx: label, entry (HFRThresholdPercentage), group (Capture)
#. +> trunk5
#: kstars.kcfg:1603
#, kde-format
msgid "Increase autofocus HFR value by this percentage gain and store it in Capture Module."
msgstr ""
#. i18n: ectx: label, entry (SaveHFRToFile), group (Capture)
#. +> trunk5
#: kstars.kcfg:1607
#, kde-format
msgid "When saving a sequence file, save current HFR threshold value. By default, zero value is used."
msgstr ""
#. i18n: ectx: label, entry (AutoStretch), group (Capture)
#. +> trunk5
#: kstars.kcfg:1619
#, kde-format
msgid "Perform auto stretch on captured images in FITS Viewer."
msgstr ""
#. i18n: ectx: label, entry (useSummaryPreview), group (Capture)
#. +> trunk5
#: kstars.kcfg:1623
#, kde-format
msgid "Display every image captured sequence image in the Ekos summary screen preview window."
msgstr ""
#. i18n: ectx: label, entry (CaptureFormatIndex), group (Capture)
#. +> trunk5
#: kstars.kcfg:1627
#, kde-format
msgid "Index of desired capture format (FITS or Native)."
msgstr ""
#. i18n: ectx: label, entry (CaptureDirectory), group (Capture)
#. +> trunk5
#: kstars.kcfg:1631
#, kde-format
msgid "Path to capture directory to save images."
msgstr ""
#. i18n: ectx: label, entry (DefaultFocusCCD), group (Focus)
#. +> trunk5
#: kstars.kcfg:1637
#, kde-format
msgid "Default focus module CCD."
msgstr ""
#. i18n: ectx: label, entry (DefaultFocusFocuser), group (Focus)
#. +> trunk5
#: kstars.kcfg:1640
#, kde-format
msgid "Default focus module focuser."
msgstr ""
#. i18n: ectx: label, entry (FocusTicks), group (Focus)
#. +> trunk5
#: kstars.kcfg:1643
#, kde-format
msgid "Default Focuser step ticks"
msgstr ""
#. i18n: ectx: whatsthis, entry (FocusTicks), group (Focus)
#. +> trunk5
#: kstars.kcfg:1644
#, kde-format
msgid "Step size of the absolute focuser. The step size TICKS should be adjusted so that when the focuser moves TICKS steps, the difference in HFR is more than 0.1 pixels. Lower the value when you are close to optimal focus."
msgstr ""
#. i18n: ectx: label, entry (FocusTolerance), group (Focus)
#. +> trunk5
#: kstars.kcfg:1652
#, kde-format
msgid "Default Focuser tolerance value"
msgstr ""
#. i18n: ectx: whatsthis, entry (FocusTolerance), group (Focus)
#. +> trunk5
#: kstars.kcfg:1653
#, kde-format
msgid "The tolerance specifies the percentage difference between the current focusing position and the minimum obtained during the focusing run. Adjustment of this value is necessary to prevent the focusing algorithm from oscillating back and forth."
msgstr ""
#. i18n: ectx: label, entry (FocusMaxTravel), group (Focus)
#. +> trunk5
#: kstars.kcfg:1657
#, kde-format
msgid "Maximum Focus Travel Distance"
msgstr ""
#. i18n: ectx: whatsthis, entry (FocusMaxTravel), group (Focus)
#. +> trunk5
#: kstars.kcfg:1658
#, kde-format
msgid "Set the maximum travel distance of an absolute focuser."
msgstr ""
#. i18n: ectx: label, entry (FocusExposure), group (Focus)
#. +> trunk5
#: kstars.kcfg:1662
#, kde-format
msgid "Default Focuser exposure value"
msgstr ""
#. i18n: ectx: whatsthis, entry (FocusExposure), group (Focus)
#. +> trunk5
#: kstars.kcfg:1663
#, kde-format
msgid "Specifies exposure value of CCD when performing focusing. Lower this value to avoid saturation of bright stars which adversely affects HFR measurement. Increase the value if no stars are detected."
msgstr ""
#. i18n: ectx: label, entry (FocusBoxSize), group (Focus)
#. +> trunk5
#: kstars.kcfg:1667
#, kde-format
msgid "Default Focuser star selection box size"
msgstr ""
#. i18n: ectx: whatsthis, entry (FocusBoxSize), group (Focus)
#. +> trunk5
#: kstars.kcfg:1668
#, kde-format
msgid "Set box size to select a focus star."
msgstr ""
#. i18n: ectx: label, entry (FocusXBin), group (Focus)
#. +> trunk5
#: kstars.kcfg:1672
#, kde-format
msgid "Default CCD X binning in focus mode"
msgstr ""
#. i18n: ectx: whatsthis, entry (FocusXBin), group (Focus)
#. +> trunk5
#: kstars.kcfg:1673
#, kde-format
msgid "Set horizontal binning of CCD camera while in focus mode."
msgstr ""
#. i18n: ectx: label, entry (FocusYBin), group (Focus)
#. +> trunk5
#: kstars.kcfg:1677
#, kde-format
msgid "Default CCD Y binning in focus mode"
msgstr ""
#. i18n: ectx: whatsthis, entry (FocusYBin), group (Focus)
#. +> trunk5
#: kstars.kcfg:1678
#, kde-format
msgid "Set vertical binning of CCD camera while in focus mode."
msgstr ""
#. i18n: ectx: label, entry (FocusSubFrame), group (Focus)
#. +> trunk5
#: kstars.kcfg:1682
#, kde-format
msgid "Subframe the focus star during the autofocus procedure."
msgstr ""
#. i18n: ectx: label, entry (FocusUseFullField), group (Focus)
#. +> trunk5
#: kstars.kcfg:1686
#, kde-format
msgid "Use full frame field to measure HFR."
msgstr ""
#. i18n: ectx: label, entry (FocusAutoStarEnabled), group (Focus)
#. +> trunk5
#: kstars.kcfg:1690
#, kde-format
msgid "Automatically select a star to focus."
msgstr ""
#. i18n: ectx: label, entry (SuspendGuiding), group (Focus)
#. +> trunk5
#: kstars.kcfg:1694
#, kde-format
msgid "Suspend guiding while autofocus in progress."
msgstr ""
#. i18n: ectx: label, entry (UseFocusDarkFrame), group (Focus)
#. +> trunk5
#: kstars.kcfg:1698
#, kde-format
msgid "Take a dark frame and subtract it before running autofocus operation."
msgstr ""
#. i18n: ectx: label, entry (FocusEffect), group (Focus)
#. +> trunk5
#: kstars.kcfg:1702
#, kde-format
msgid "Image filter to be applied to focus image upon loading."
msgstr ""
#. i18n: ectx: label, entry (FocusThreshold), group (Focus)
#. +> trunk5
#: kstars.kcfg:1706
#, kde-format
msgid "Relative percentage strength of centroid edge pixel strength to average pixel value."
msgstr ""
#. i18n: ectx: label, entry (FocusDetection), group (Focus)
#. +> trunk5
#: kstars.kcfg:1710
#, kde-format
msgid "Star detection algorithm"
msgstr ""
#. i18n: ectx: label, entry (FocusAlgorithm), group (Focus)
#. +> trunk5
#: kstars.kcfg:1714
#, kde-format
msgid "Focus process algorithm"
msgstr ""
#. i18n: ectx: label, entry (FocusFramesCount), group (Focus)
#. +> trunk5
#: kstars.kcfg:1718
#, kde-format
msgid "Number of focus frames to average for HFR calculations."
msgstr ""
#. i18n: ectx: label, entry (DefaultAlignCCD), group (Align)
#. +> trunk5
#: kstars.kcfg:1724
#, kde-format
msgid "Default align module CCD."
msgstr ""
#. i18n: ectx: label, entry (DefaultAlignFW), group (Align)
#. +> trunk5
#: kstars.kcfg:1727
#, kde-format
msgid "Default align module Filter Wheel."
msgstr ""
#. i18n: ectx: label, entry (AlignExposure), group (Align)
#. +> trunk5
#: kstars.kcfg:1730
#, kde-format
msgid "Default alignment exposure value"
msgstr ""
#. i18n: ectx: whatsthis, entry (AlignExposure), group (Align)
#. +> trunk5
#: kstars.kcfg:1731
#, kde-format
msgid "Specifies exposure value of CCD in seconds when performing plate solving."
msgstr ""
#. i18n: ectx: label, entry (SolverBinningIndex), group (Align)
#. +> trunk5
#: kstars.kcfg:1735
#, kde-format
msgid "Default CCD binning index while in alignment mode"
msgstr ""
#. i18n: ectx: whatsthis, entry (SolverBinningIndex), group (Align)
#. +> trunk5
#: kstars.kcfg:1736
#, kde-format
msgid "Set binning index of CCD camera while in alignment mode. Default values 0-3 corresponding to 1x1 to 4x4 binning. 4 is max binning."
msgstr ""
#. i18n: ectx: whatsthis, entry (AstrometrySolverVerbose), group (Align)
#. +> trunk5
#: kstars.kcfg:1740
#, kde-format
msgid "Display detailed verbose messages of the astrometry solver process while in progress."
msgstr ""
#. i18n: ectx: whatsthis, entry (AstrometryUseRotator), group (Align)
#. +> trunk5
#: kstars.kcfg:1744
#, kde-format
msgid "Use rotator when performing load and slew."
msgstr ""
#. i18n: ectx: whatsthis, entry (AstrometryRotatorThreshold), group (Align)
#. +> trunk5
#: kstars.kcfg:1748
#, kde-format
msgid "Threshold between measured and FITS position angles in arcminutes to consider the load and slew operation successful."
msgstr ""
#. i18n: ectx: label, entry (SolverType), group (Align)
#. +> trunk5
#: kstars.kcfg:1752
#, kde-format
msgid "Set solver type (online, offline, remote)."
msgstr ""
#. i18n: ectx: label, entry (SolverScopeType), group (Align)
#. +> trunk5
#: kstars.kcfg:1756
#, kde-format
msgid "Index of telescope type to be used when solving an image. 0 for Primary, 1 for Guide"
msgstr ""
#. i18n: ectx: label, entry (SolverGotoOption), group (Align)
#. +> trunk5
#: kstars.kcfg:1760
#, kde-format
msgid "Action to take if solver if successful (Sync, Slew to Target, or None)"
msgstr ""
#. i18n: ectx: label, entry (AstrometrySolverWCS), group (Align)
#. +> trunk5
#: kstars.kcfg:1764
#, kde-format
msgid "World Coordinate System (WCS). WCS is used to encode RA/DEC coordinates in captured CCD images."
msgstr ""
#. i18n: ectx: label, entry (AstrometrySolverOverlay), group (Align)
#. +> trunk5
#: kstars.kcfg:1768
#, kde-format
msgid "Display received FITS images unto solver FOV rectangle in the sky map."
msgstr ""
#. i18n: ectx: label, entry (AstrometryDifferentialSlewing), group (Align)
#. +> trunk5
#: kstars.kcfg:1772
#, kde-format
msgid "Do not use Sync when Slew to Target is selected. Use differential slewing to correct for discrepancies."
msgstr ""
#. i18n: ectx: label, entry (SolverAccuracyThreshold), group (Align)
#. +> trunk5
#: kstars.kcfg:1776
#, kde-format
msgid "Accuracy threshold in arcseconds between solution and target coordinates."
msgstr ""
#. i18n: ectx: label, entry (LockAlignFilterIndex), group (Align)
#. +> trunk5
#: kstars.kcfg:1780
#, kde-format
msgid "Use specified filter index when performing astrometry regardless of current filter settings."
msgstr ""
#. i18n: ectx: label, entry (AlignDarkFrame), group (Align)
#. +> trunk5
#: kstars.kcfg:1784
#, kde-format
msgid "Take a dark frame and subtract it before running astrometry operation."
msgstr ""
#. i18n: ectx: label, entry (SettlingTime), group (Align)
#. +> trunk5
#: kstars.kcfg:1788
#, kde-format
msgid "Time to wait in milliseconds after telescope slewing is complete before starting the next capture."
msgstr ""
#. i18n: ectx: label, entry (AstrometryUseNoFITS2FITS), group (Align)
#. +> trunk5
#: kstars.kcfg:1792
#, kde-format
msgid "Do not sanitize FITS. This option should only be checked if astrometry.net version is 0.67 or earlier. Uncheck for any versions greater than 0.67."
msgstr ""
#. i18n: ectx: label, entry (AstrometryImageScaleLow), group (Align)
#. +> trunk5
#: kstars.kcfg:1808
#, kde-format
msgid "Lower image scale."
msgstr ""
#. i18n: ectx: label, entry (AstrometryImageScaleHigh), group (Align)
#. +> trunk5
#: kstars.kcfg:1811
#, kde-format
msgid "Upper image scale."
msgstr ""
#. i18n: ectx: label, entry (AstrometryAutoUpdateImageScale), group (Align)
#. +> trunk5
#: kstars.kcfg:1814
#, kde-format
msgid "Automatically update image scale when CCD or Mount parameters are updated."
msgstr ""
#. i18n: ectx: label, entry (AstrometryImageScaleUnits), group (Align)
#. +> trunk5
#: kstars.kcfg:1818
#, kde-format
msgid "Image scale units in arcminutes (aw), degrees (dw), or arcsec per pixel (app)"
msgstr ""
#. i18n: ectx: label, entry (AstrometryDownsample), group (Align)
#. +> trunk5
#: kstars.kcfg:1826
#, kde-format
msgid "Downsample factor"
msgstr ""
#. i18n: ectx: label, entry (AstrometryPositionRA), group (Align)
#. +> trunk5
#: kstars.kcfg:1834
#, kde-format
msgid "User supplied Right Ascension value in degrees to be passed to the solver."
msgstr ""
#. i18n: ectx: label, entry (AstrometryPositionDE), group (Align)
#. +> trunk5
#: kstars.kcfg:1837
#, kde-format
msgid "User supplied declination value in degrees to be passed to the solver."
msgstr ""
#. i18n: ectx: label, entry (AstrometryAutoUpdatePosition), group (Align)
#. +> trunk5
#: kstars.kcfg:1840
#, kde-format
msgid "Automatically update position coordinates when mounts completes slewing."
msgstr ""
#. i18n: ectx: label, entry (AstrometryCustomOptions), group (Align)
#. i18n: ectx: label, entry (AstrometrySolverBinary), group (Align)
#. +> trunk5
#: kstars.kcfg:1855
#, kde-format
msgid "astrometry.net solve-field binary"
msgstr ""
#. i18n: ectx: whatsthis, entry (AstrometrySolverBinary), group (Align)
#. +> trunk5
#: kstars.kcfg:1856
#, kde-format
msgid "Path to astrometry.net solver location."
msgstr ""
#. i18n: ectx: label, entry (AstrometryWCSInfo), group (Align)
#. +> trunk5
#: kstars.kcfg:1864
#, kde-format
msgid "astrometry.net wcsinfo binary"
msgstr ""
#. i18n: ectx: whatsthis, entry (AstrometryWCSInfo), group (Align)
#. +> trunk5
#: kstars.kcfg:1865
#, kde-format
msgid "Path to astrometry.net wcsinfo location."
msgstr ""
#. i18n: ectx: label, entry (AstrometryConfFile), group (Align)
#. +> trunk5
#: kstars.kcfg:1873
#, kde-format
msgid "astrometry.net configuration file"
msgstr ""
#. i18n: ectx: whatsthis, entry (AstrometryConfFile), group (Align)
#. +> trunk5
#: kstars.kcfg:1874
#, kde-format
msgid "Path to astrometry.net file location."
msgstr ""
#. i18n: ectx: label, entry (AstrometryConfFileIsInternal), group (Align)
#. +> trunk5
#: kstars.kcfg:1878
#, kde-format
msgid "Internal or External Astrometry.net Conf File?"
msgstr ""
#. i18n: ectx: label, entry (AstrometryAPIKey), group (Align)
#. +> trunk5
#: kstars.kcfg:1882
#, kde-format
msgid "astrometry.net API Key"
msgstr ""
#. i18n: ectx: whatsthis, entry (AstrometryAPIKey), group (Align)
#. +> trunk5
#: kstars.kcfg:1883
#, kde-format
msgid "Key to access astrometry.net online web services. You must register with astrometry.net to obtain a key."
msgstr ""
#. i18n: ectx: label, entry (AstrometryAPIURL), group (Align)
#. +> trunk5
#: kstars.kcfg:1887
#, kde-format
msgid "astrometry.net API URL"
msgstr ""
#. i18n: ectx: label, entry (AstrometryUseJPEG), group (Align)
#. +> trunk5
#: kstars.kcfg:1891
#, kde-format
msgid "Use JPEG format, instead of FITS, to upload images to the astrometry.net online service."
msgstr ""
#. i18n: ectx: label, entry (AstrometryTimeout), group (Align)
#. +> trunk5
#: kstars.kcfg:1895
#, kde-format
msgid "Timeout in seconds to wait for astrometry solver to complete."
msgstr ""
#. i18n: ectx: label, entry (DefaultGuideCCD), group (Guide)
#. +> trunk5
#: kstars.kcfg:1901
#, kde-format
msgid "Default guide module CCD."
msgstr ""
#. i18n: ectx: label, entry (DefaultST4Driver), group (Guide)
#. +> trunk5
#: kstars.kcfg:1904
#, kde-format
msgid "Default guide module ST4 Driver."
msgstr ""
#. i18n: ectx: label, entry (GuideExposure), group (Guide)
#. +> trunk5
#: kstars.kcfg:1907
#, kde-format
msgid "Guider exposure duration in seconds."
msgstr ""
#. i18n: ectx: label, entry (GuiderType), group (Guide)
#. +> trunk5
#: kstars.kcfg:1911
#, kde-format
msgid "Which guider process to utilize for guiding (0 Internal Guider, 1 PHD2, 2 lin_guider)"
msgstr ""
#. i18n: ectx: label, entry (GuideAlgorithm), group (Guide)
#. +> trunk5
#: kstars.kcfg:1915
#, kde-format
msgid "Which Algorithm to use track guide square (0 smart, 1 fast, 2 threshold, 3 no threshold)."
msgstr ""
#. i18n: ectx: label, entry (PHD2Host), group (Guide)
#. +> trunk5
#: kstars.kcfg:1919
#, kde-format
msgid "Host name of external PHD2 service"
msgstr ""
#. i18n: ectx: label, entry (PHD2Port), group (Guide)
#. +> trunk5
#: kstars.kcfg:1923
#, kde-format
msgid "PHD2 Event Monitoring Port"
msgstr ""
#. i18n: ectx: label, entry (LinGuiderHost), group (Guide)
#. +> trunk5
#: kstars.kcfg:1927
#, kde-format
msgid "Host name of external lin_guider service"
msgstr ""
#. i18n: ectx: label, entry (LinGuiderPort), group (Guide)
#. +> trunk5
#: kstars.kcfg:1931
#, kde-format
msgid "Lin_guider Event Monitoring Port"
msgstr ""
#. i18n: ectx: label, entry (GuideScopeType), group (Guide)
#. +> trunk5
#: kstars.kcfg:1935
#, kde-format
msgid "Index of telescope type to be used when guiding. 0 for Primary, 1 for Guide"
msgstr ""
#. i18n: ectx: label, entry (CalibrationPulseDuration), group (Guide)
#. +> trunk5
#: kstars.kcfg:1939
#, kde-format
msgid "Pulse duration in milliseconds used for guiding pulses during calibration stage."
msgstr ""
#. i18n: ectx: label, entry (GuideSquareSizeIndex), group (Guide)
#. +> trunk5
#: kstars.kcfg:1943
#, kde-format
msgid "Guide square size index (0 to 4) corresponding to pixel sizes (8 to 128)."
msgstr ""
#. i18n: ectx: label, entry (ImageGuidingEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:1947
#, kde-format
msgid "Use Image Guiding algorithms instead of classical centroid guiding."
msgstr ""
#. i18n: ectx: label, entry (GuideRegionAxis), group (Guide)
#. +> trunk5
#: kstars.kcfg:1951
#, kde-format
msgid "Region Axis Index (0 to 4) corresponding to NxN partition size used Image Guiding (64 to 1024)."
msgstr ""
#. i18n: ectx: label, entry (GuideAutoStarEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:1955
#, kde-format
msgid "Automatically select calibration star and perform calibration."
msgstr ""
#. i18n: ectx: label, entry (GuideRemoteImagesEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:1963
#, kde-format
msgid "When using external guiders, enable reception of remote images in Ekos guide module. By default, remote images are disabled."
msgstr ""
#. i18n: ectx: label, entry (AutoModeIterations), group (Guide)
#. +> trunk5
#: kstars.kcfg:1967
#, kde-format
msgid "Number of automode iterations for calibration process."
msgstr ""
#. i18n: ectx: label, entry (GuideLostStarTimeout), group (Guide)
#. +> trunk5
#: kstars.kcfg:1971
#, kde-format
msgid "When star tracking is lost, wait this many seconds before aborting."
msgstr ""
#. i18n: ectx: label, entry (GuideMaxDeltaRMS), group (Guide)
#. +> trunk5
#: kstars.kcfg:1975
#, kde-format
msgid "Maximum delta RMS permitted while guiding before aborting."
msgstr ""
#. i18n: ectx: label, entry (TwoAxisEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:1979
#, kde-format
msgid "Use both axes to perform calibration."
msgstr ""
#. i18n: ectx: label, entry (RapidGuideEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:1983
#, kde-format
msgid "Use driver side Rapid Guide to perform guiding."
msgstr ""
#. i18n: ectx: label, entry (GuideDarkFrameEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:1987
#, kde-format
msgid "Take dark frame for autoguider images."
msgstr ""
#. i18n: ectx: label, entry (GuideSubframeEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:1991
#, kde-format
msgid "Subframe guide image around selected region"
msgstr ""
#. i18n: ectx: label, entry (DitherPixels), group (Guide)
#. +> trunk5
#: kstars.kcfg:1995
#, kde-format
msgid "How many pixels to move between subsequent exposures under auto dithering mode."
msgstr ""
#. i18n: ectx: label, entry (DitherFrames), group (Guide)
#. +> trunk5
#: kstars.kcfg:1999
#, kde-format
msgid "Dither after this many frames."
msgstr ""
#. i18n: ectx: label, entry (DitherThreshold), group (Guide)
#. +> trunk5
#: kstars.kcfg:2007
#, kde-format
msgid "Maximum distance (pixels) for guiding to be considered settled."
msgstr ""
#. i18n: ectx: label, entry (DitherTimeout), group (Guide)
#. +> trunk5
#: kstars.kcfg:2011
#, kde-format
msgid "Time limit (seconds) on dithering to settle down."
msgstr ""
#. i18n: ectx: label, entry (DitherMaxIterations), group (Guide)
#. +> trunk5
#: kstars.kcfg:2015
#, kde-format
msgid "How many dithering attempts to undertake before giving up."
msgstr ""
#. i18n: ectx: label, entry (DitherNoGuidingPulse), group (Guide)
#. +> trunk5
#: kstars.kcfg:2019
#, kde-format
msgid "Pulse length in milliseconds used for non-guiding dither."
msgstr ""
#. i18n: ectx: label, entry (DitherFailAbortsAutoGuide), group (Guide)
#. +> trunk5
#: kstars.kcfg:2023
#, kde-format
msgid "If dithering fails then abort autoguide."
msgstr ""
#. i18n: ectx: label, entry (DitherEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:2027
#, kde-format
msgid "Use Auto Dithering when guiding."
msgstr ""
#. i18n: ectx: label, entry (DitherNoGuiding), group (Guide)
#. +> trunk5
#: kstars.kcfg:2031
#, kde-format
msgid "Perform dithering even when not guiding."
msgstr ""
#. i18n: ectx: label, entry (AOLimit), group (Guide)
#. +> trunk5
#: kstars.kcfg:2035
#, kde-format
msgid "The Adaptive Optics unit is utilized if the guiding deviation is less than this limit in arcseconds. Once exceeded, mechanical guiding is utilized."
msgstr ""
#. i18n: ectx: label, entry (RAGuideEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:2039
#, kde-format
msgid "Enable autoguiding in the RA axis."
msgstr ""
#. i18n: ectx: label, entry (DECGuideEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:2043
#, kde-format
msgid "Enable autoguiding in the DEC axis."
msgstr ""
#. i18n: ectx: label, entry (NorthDECGuideEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:2047
#, kde-format
msgid "Enable North autoguiding in the DEC axis."
msgstr ""
#. i18n: ectx: label, entry (SouthDECGuideEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:2051
#, kde-format
msgid "Enable South autoguiding in the DEC axis."
msgstr ""
#. i18n: ectx: label, entry (EastRAGuideEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:2055
#, kde-format
msgid "Enable East autoguiding in the RA axis."
msgstr ""
#. i18n: ectx: label, entry (WestRAGuideEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:2059
#, kde-format
msgid "Enable West autoguiding in the RA axis."
msgstr ""
#. i18n: ectx: label, entry (GuiderAccuracyThreshold), group (Guide)
#. +> trunk5
#: kstars.kcfg:2096
#, kde-format
msgid "Accuracy threshold for the Guide Graphs."
msgstr ""
#. i18n: ectx: label, entry (RADisplayedOnGuideGraph), group (Guide)
#. +> trunk5
#: kstars.kcfg:2100
#, kde-format
msgid "Display the RA Plot on the Guide Drift Graphics."
msgstr ""
#. i18n: ectx: label, entry (DEDisplayedOnGuideGraph), group (Guide)
#. +> trunk5
#: kstars.kcfg:2104
#, kde-format
msgid "Display the DEC Plot on the Guide Drift Graphics."
msgstr ""
#. i18n: ectx: label, entry (RACorrDisplayedOnGuideGraph), group (Guide)
#. +> trunk5
#: kstars.kcfg:2108
#, kde-format
msgid "Display the RA Corrections Plot on the Guide Drift Graphics."
msgstr ""
#. i18n: ectx: label, entry (DECorrDisplayedOnGuideGraph), group (Guide)
#. +> trunk5
#: kstars.kcfg:2112
#, kde-format
msgid "Display the DEC Corrections Plot on the Guide Drift Graphics."
msgstr ""
#. i18n: ectx: whatsthis, entry (SchedulerLogging), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2118
#, kde-format
msgid "Log Ekos Scheduler Module activity."
msgstr ""
#. i18n: ectx: whatsthis, entry (SortSchedulerJobs), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2122
#, kde-format
msgid "Sort scheduler jobs by priority and altitude."
msgstr ""
#. i18n: ectx: label, entry (StopEkosAfterShutdown), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2126
#, kde-format
msgid "After shutdown procedure is successfully executed, shutdown INDI and Ekos."
msgstr ""
#. i18n: ectx: label, entry (ShutdownScriptTerminatesINDI), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2130
#, kde-format
msgid "Whether shutdown script, if exists, terminates INDI server in the process."
msgstr ""
#. i18n: ectx: label, entry (PreemptiveShutdown), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2134
#, kde-format
msgid "Perform pre-emptive shutdown if no jobs are due for a number of hours."
msgstr ""
#. i18n: ectx: label, entry (ResetMountModelOnAlignFail), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2138
#, kde-format
msgid "Reset mount model in case of alignment failure."
msgstr ""
#. i18n: ectx: label, entry (ResetMountModelBeforeJob), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2142
#, kde-format
msgid "Reset mount model before starting each job."
msgstr ""
#. i18n: ectx: label, entry (ResetGuideCalibration), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2146
#, kde-format
msgid "Always Reset guiding calibration before starting each job."
msgstr ""
#. i18n: ectx: label, entry (RealignAfterCalibrationFailure), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2150
#, kde-format
msgid "If guiding calibration fails, run alignment process again before proceeding to recalibration."
msgstr ""
#. i18n: ectx: label, entry (PreemptiveShutdownTime), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2154
#, kde-format
msgid "Maximum number of hours before the next job is due to trigger a pre-emptive shutdown."
msgstr ""
#. i18n: ectx: label, entry (LeadTime), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2158
#, kde-format
msgid "Minimum time between jobs in minutes."
msgstr ""
#. i18n: ectx: label, entry (PreDawnTime), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2162
#, kde-format
msgid "Do not permit jobs to be scheduled or executed past this many minutes before dawn."
msgstr ""
#. i18n: ectx: label, entry (TelescopeFocalLength), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2166
#, kde-format
msgid "Telescope focal length in millimeters."
msgstr ""
#. i18n: ectx: label, entry (CameraPixelWidth), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2170
#, kde-format
msgid "Camera pixel size width in micrometers."
msgstr ""
#. i18n: ectx: label, entry (CameraPixelHeight), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2174
#, kde-format
msgid "Camera pixel size height in micrometers."
msgstr ""
#. i18n: ectx: label, entry (CameraWidth), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2178
#, kde-format
msgid "Camera Width in pixels."
msgstr ""
#. i18n: ectx: label, entry (CameraHeight), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2182
#, kde-format
msgid "Camera Height in pixels."
msgstr ""
#. i18n: ectx: label, entry (CameraRotation), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2186
#, kde-format
msgid "Position angle of the camera with respect to north."
msgstr ""
#. i18n: ectx: label, entry (LastServer), group (INDI Lite)
#. +> trunk5
#: kstars.kcfg:2192
#, kde-format
msgid "The address of last used server"
msgstr ""
#. i18n: ectx: label, entry (LastServerPort), group (INDI Lite)
#. +> trunk5
#: kstars.kcfg:2195
#, kde-format
msgid "The port of last used server"
msgstr ""
#. i18n: ectx: label, entry (LastWebManagerPort), group (INDI Lite)
#. +> trunk5
#: kstars.kcfg:2199
#, kde-format
msgid "The port of last used Web Manager"
msgstr ""
#. i18n: ectx: label, entry (HIPSMemoryCache), group (HIPS)
#. +> trunk5
#: kstars.kcfg:2205
#, kde-format
msgid "RAM cache size in MB used to store cached HIPS images."
msgstr ""
#. i18n: ectx: label, entry (HIPSNetCache), group (HIPS)
#. +> trunk5
#: kstars.kcfg:2209
#, kde-format
msgid "Hard disk cache size in MB used to store cached HIPS images."
msgstr ""
#. i18n: ectx: label, entry (HIPSSource), group (HIPS)
#. +> trunk5
#: kstars.kcfg:2213
#, kde-format
msgid "HIPS source catalog title."
msgstr ""
#. i18n: ectx: label, entry (HIPSBiLinearInterpolation), group (HIPS)
#. +> trunk5
#: kstars.kcfg:2217
#, kde-format
msgid "Use Bilinear interpolation when rendering HiPS images?"
msgstr ""
#. i18n: ectx: label, entry (HIPSShowGrid), group (HIPS)
#. +> trunk5
#: kstars.kcfg:2221
#, kde-format
msgid "Show HiPS grid on the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowHIPS), group (HIPS)
#. +> trunk5
#: kstars.kcfg:2225
#, kde-format
msgid "Draw HiPS sources in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowHIPS), group (HIPS)
#. +> trunk5
#: kstars.kcfg:2226
#, kde-format
msgid "Toggle whether the HIPS sources are drawn in the sky map."
#. addSmoothCurveAction = new QAction(QIcon::fromTheme("labplot-xy-smooth-curve"), i18n("xy-curve from a smooth"), this);
#. addFourierFilterCurveAction = new QAction(QIcon::fromTheme("labplot-xy-fourier_filter-curve"), i18n("xy-curve from a Fourier filter"), this);
#. addFourierTransformCurveAction = new QAction(QIcon::fromTheme("labplot-xy-fourier_transform-curve"), i18n("xy-curve from a Fourier transform"), this);
#. addConvolutionCurveAction = new QAction(QIcon::fromTheme("labplot-xy-convolution-curve"), i18n("xy-curve from a convolution"), this);
"For 'C Format', a period is used for the decimal point character and comma is used for the thousands group separator. Valid number representations are:"
"<ul>"
"<li>1234.56</li>"
"<li>1,234.56</li>"
"<li>etc.</li>"
"</ul>"
"When using 'System locale', the system settings will be used. E.g., for the German local the valid number representations are:"
msgid "This option determines how the imported strings have to be converted to calendar date, i.e. year, month, and day numbers in the Gregorian calendar and to time."
"<p>The ICC profiles folder seems to be invalid.</p>"
"<p>If you want to try setting it again, choose \"Yes\" here, otherwise choose \"No\", and the \"Color Management\" feature will be disabled until you solve this issue.</p>"
msgstr ""
#. +> trunk5
#: core/app/main/digikamapp.cpp:524
#, kde-format
msgid "No item selected (%1 item)"
msgid_plural "No item selected (%1 items)"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5
#: core/app/main/digikamapp.cpp:530
#, kde-format
msgid "No item selected (%1 [%2] item)"
msgid_plural "No item selected (%1 [%2] items)"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5
#: core/app/main/digikamapp.cpp:534
#, kde-format
msgid "No item selected (%1 item. With grouped items: %2)"
msgid_plural "No item selected (%1 items. With grouped items: %2)"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5
#: core/app/main/digikamapp.cpp:543
#, kde-format
msgid "%1/%2 items selected"
msgstr ""
#. +> trunk5
#: core/app/main/digikamapp.cpp:553
#, kde-format
msgid "%1/%2 [%3] items selected"
msgstr ""
#. +> trunk5
#: core/app/main/digikamapp.cpp:556
#, kde-format
msgid "%1/%2 items selected. Total with grouped items: %3"
msgstr ""
#. +> trunk5
#: core/app/main/digikamapp.cpp:563
#, kde-format
msgid "%1/%2 [%3/%4] items selected"
msgstr ""
#. +> trunk5
#: core/app/main/digikamapp.cpp:567
#, kde-format
msgid "%1/%2 items selected. With grouped items: %3/%4"
msgstr ""
#. +> trunk5
#: core/app/main/digikamapp.cpp:589
#, kde-format
msgid " (%1 of %2)"
msgstr ""
#. +> trunk5
#: core/app/main/digikamapp.cpp:598
#, kde-format
msgid " (%1 of %2 [%3])"
msgstr ""
#. +> trunk5
#: core/app/main/digikamapp.cpp:602
#, kde-format
msgid " (%1 of %2. Total with grouped items: %3)"
msgstr ""
#. +> trunk5
#: core/app/main/digikamapp.cpp:649
#, kde-format
msgid "Write Metadata to File"
msgid_plural "Write Metadata to Selected Files"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5
#: core/app/main/digikamapp.cpp:651
#, kde-format
msgid "Reread Metadata From File"
msgid_plural "Reread Metadata From Selected Files"
msgid "Edit album properties and collection information."
msgstr ""
#. +> trunk5
#: core/app/main/digikamapp_setup.cpp:261
#, kde-format
msgid "Write Metadata to Files"
msgstr ""
#. +> trunk5
#: core/app/main/digikamapp_setup.cpp:262
#: core/app/main/digikamapp_setup.cpp:419
#, kde-format
msgid "Updates metadata of files in the current album with the contents of digiKam database (file metadata will be overwritten with data from the database)."
msgstr ""
#. +> trunk5
#: core/app/main/digikamapp_setup.cpp:271
#, kde-format
msgid "Reread Metadata From Files"
msgstr ""
#. +> trunk5
#: core/app/main/digikamapp_setup.cpp:272
#: core/app/main/digikamapp_setup.cpp:430
#, kde-format
msgid "Updates the digiKam database from the metadata of the files in the current album (information in the database will be overwritten with data from the files' metadata)."
msgid "Open camera dialog for the device with Solid UDI <udi>"
msgstr ""
#. +> trunk5
#: core/app/main/main.cpp:107
#, kde-format
msgid "Automatically detect and open a connected gphoto2 camera"
msgstr ""
#. +> trunk5
#: core/app/main/main.cpp:109
#, kde-format
msgid "Start digikam with the SQLite database file found in the directory <dir>"
msgstr ""
#. +> trunk5
#: core/app/main/main.cpp:112
#, kde-format
msgid "Start digikam with the configuration file <config>"
msgstr ""
#. +> trunk5
#: core/app/main/main.cpp:132
#, kde-format
msgid ""
"Run-time Qt SQLite or MySQL database plugin is not available. please install it.\n"
"There is no database plugin installed on your computer."
msgstr ""
#. +> trunk5
#: core/app/main/main.cpp:141
#, kde-format
msgid ""
"Run-time Qt SQLite or MySQL database plugin are not available. Please install it.\n"
"Database plugins installed on your computer are listed below."
msgstr ""
#. +> trunk5
#: core/app/main/main.cpp:178
#, kde-format
msgid "<p>The given path for the config file is not valid. Either its parent directory does not exist, it is a directory itself or it cannot be read/written to.</p>"
msgid "Are you sure you want to delete those items permanently?"
msgstr ""
#. +> trunk5
#: core/app/views/trashview.cpp:262
#, kde-format
msgid "Are you sure you want to delete ALL items permanently?"
msgstr ""
#. +> trunk5
#: core/app/views/welcomepageview.cpp:125
#, kde-format
msgid "Image Editor: Add Web services Import and Export tools;"
msgstr ""
#. +> trunk5
#: core/app/views/welcomepageview.cpp:126
#, kde-format
msgid "Showfoto: Add Web services Import and Export tools;"
msgstr ""
#. +> trunk5
#: core/app/views/welcomepageview.cpp:127
#, kde-format
msgid "Light Table: Add Web services Import and Export tools;"
msgstr ""
#. +> trunk5
#: core/app/views/welcomepageview.cpp:128
#, kde-format
msgid "New video metadata parser based on ffmpeg to populate database;"
msgstr ""
#. +> trunk5
#: core/app/views/welcomepageview.cpp:129
#, kde-format
msgid "Add video support to find files based on properties registered on database."
msgstr ""
#. +> trunk5
#: core/app/views/welcomepageview.cpp:130
#, kde-format
msgid "Similarity database has been moved to a dedicated file to not bloat core database with computed finger-prints. This will speed-up query in core database in case of Similarity feature is used."
msgstr ""
#. +> trunk5
#: core/app/views/welcomepageview.cpp:132
#, kde-format
msgid "Add possibility to merge tags by drag & drop."
msgstr ""
#. +> trunk5
#: core/app/views/welcomepageview.cpp:133
#, kde-format
msgid "HTML Gallery: New Vanilla theme to emulate export to HTML from Adobe LightRoom."
msgstr ""
#. +> trunk5
#: core/app/views/welcomepageview.cpp:134
#, kde-format
msgid "HTML Gallery: New Blue Frame theme."
msgstr ""
#. +> trunk5
#: core/app/views/welcomepageview.cpp:137
#, kde-format
msgid "...and much more."
msgstr ""
#. +> trunk5
#: core/app/views/welcomepageview.cpp:143
#, kde-format
msgid ""
"<li>%1</li>"
"\n"
msgstr ""
#. +> trunk5
#: core/app/views/welcomepageview.cpp:146
#, kde-format
msgid "New Features"
msgstr ""
#. +> trunk5
#: core/app/views/welcomepageview.cpp:148
#, kde-format
msgid ""
"<h3>%1</h3>"
"<ul>%2</ul>"
msgstr ""
#. +> trunk5
#: core/app/views/welcomepageview.cpp:149
#, kde-format
msgid "Some of the new features in this release of digiKam include (compared to digiKam 5.x):"
msgstr ""
#. +> trunk5
#: core/app/views/welcomepageview.cpp:158
#, kde-format
msgid "About"
msgstr ""
#. +> trunk5
#: core/app/views/welcomepageview.cpp:160
#, kde-format
msgid ""
"<h3>%1</h3>"
"<h3>%2</h3>"
"<ul>%3</ul>"
msgstr ""
#. +> trunk5
#: core/app/views/welcomepageview.cpp:161
#, kde-format
msgid "digiKam is an open source photo management program designed to import, organize, enhance, search and export your digital images to and from your computer."
msgstr ""
#. +> trunk5
#: core/app/views/welcomepageview.cpp:162
#, kde-format
msgid "Currently, you are in the Album view mode of digiKam. Albums are the places where your files are stored, and are identical to the folders on your hard disk."
msgstr ""
#. +> trunk5
#: core/app/views/welcomepageview.cpp:163
#, kde-format
msgid ""
"<li>%1</li>"
"<li>%2</li>"
msgstr ""
#. +> trunk5
#: core/app/views/welcomepageview.cpp:164
#, kde-format
msgid "digiKam has many powerful features which are described in the <a href=\"https://docs.kde.org/trunk5/en/extragear-graphics/digikam/index.html\">documentation</a>"
msgstr ""
#. +> trunk5
#: core/app/views/welcomepageview.cpp:165
#, kde-format
msgid "The <a href=\"http://www.digikam.org\">digiKam homepage</a> provides information about new versions of digiKam."
msgid "Failed to backup the existing database file (\"%1\"). Refusing to replace file without backup, using the existing file."
msgstr ""
#. +> trunk5
#: core/libs/album/albummanager.cpp:433
#, kde-format
msgid "Failed to copy the old database file (\"%1\") to its new location (\"%2\"). Starting with an empty database."
msgstr ""
#. +> trunk5
#: core/libs/album/albummanager.cpp:467
#, kde-format
msgid "Database Folder"
msgstr ""
#. +> trunk5
#: core/libs/album/albummanager.cpp:468
#, kde-format
msgid ""
"<p>You have chosen the folder \"%1\" as the place to store the database. A database file from an older version of digiKam is found in this folder.</p>"
" "
"<p>Would you like to upgrade the old database file - confirming that this database file was indeed created for the pictures located in the folder \"%2\" - or ignore the old file and start with a new database?</p>"
"<p>You have chosen the folder \"%1\" as the new place to store the database. A database file from an older version of digiKam is found in this folder.</p>"
" "
"<p>Would you like to upgrade the old database file, start with a new database, or copy the current database to this location and continue using it?</p>"
"<p>You have chosen the folder \"%1\" as the new place to store the database. A database file from an older version of digiKam is found in this folder.</p>"
" "
"<p>Would you like to upgrade the old database file or start with a new database?</p>"
msgstr ""
#. +> trunk5
#: core/libs/album/albummanager.cpp:589
#, kde-format
msgid "Failed to copy the old database file (\"%1\") to its new location (\"%2\"). Trying to upgrade old databases."
msgstr ""
#. +> trunk5
#: core/libs/album/albummanager.cpp:604
#, kde-format
msgid ""
"<p>You have chosen the folder \"%1\" as the new place to store the database.</p>"
"<p>Would you like to copy the current database to this location and continue using it, or start with a new database?</p>"
" "
msgstr ""
#. +> trunk5
#: core/libs/album/albummanager.cpp:636
#, kde-format
msgid ""
"<p>You have chosen the folder \"%1\" as the new place to store the database. There is already a database file in this location.</p>"
" "
"<p>Would you like to use this existing file as the new database, or remove it and copy the current database to this place?</p>"
" "
msgstr ""
#. +> trunk5
#: core/libs/album/albummanager.cpp:646
#, kde-format
msgid "Use Existing File"
msgstr ""
#. +> trunk5
#: core/libs/album/albummanager.cpp:748
#, kde-format
msgid ""
"<p><b>An error occurred during the internal server start.</b></p>"
"<p>You cannot use digiKam without a working database. digiKam will attempt to start now, but it will <b>not</b> be functional. Please check the database settings in the <b>configuration menu</b>.</p>"
msgstr ""
#. +> trunk5
#: core/libs/album/albummanager.cpp:805
#, kde-format
msgid ""
"<p>Failed to open the database. Error message from database:</p>"
"<p><b>%1</b></p>"
"</p>"
"<p>You cannot use digiKam without a working database. digiKam will attempt to start now, but it will <b>not</b> be functional. Please check the database settings in the <b>configuration menu</b>.</p>"
msgstr ""
#. +> trunk5
#: core/libs/album/albummanager.cpp:878
#, kde-format
msgid ""
"Your locale has changed since this album was last opened.\n"
"Old locale: %1, new locale: %2\n"
"If you have recently changed your locale, you need not be concerned.\n"
"Please note that if you switched to a locale that does not support some of the filenames in your collection, these files may no longer be found in the collection. If you are sure that you want to continue, click 'Yes'. Otherwise, click 'No' and correct your locale setting before restarting digiKam."
msgstr ""
#. +> trunk5
#: core/libs/album/albummanager.cpp:920
#, kde-format
msgid ""
"<p>The collection </p>"
"<p><b>%1</b><br/>"
"(%2)</p>"
"<p> is currently not found on your system.<br/>"
" Please choose the most appropriate option to handle this situation:</p>"
msgstr ""
#. +> trunk5
#: core/libs/album/albummanager.cpp:938
#, kde-format
msgid ""
"<p>The collection is still available, but the identifier changed.<br/>"
"This can be caused by restoring a backup, changing the partition layout or the file system settings.<br/>"
"The collection is now located at this place:</p>"
msgstr ""
#. +> trunk5
#: core/libs/album/albummanager.cpp:957
#, kde-format
msgid "The collection is located on a storage device which is not always attached. Mark the collection as a removable collection."
msgstr ""
#. +> trunk5
#: core/libs/album/albummanager.cpp:964
#, kde-format
msgid "Take no action now. I would like to solve the problem later using the setup dialog"
msgid "This is a CD/DVD, which is identified by the label that you can set in your CD burning application. There is already another entry with the same label. The two will be distinguished by the files in the top directory, so please do not append files to the CD, or it will not be recognized. In the future, please set a unique label on your CDs and DVDs if you intend to use them with digiKam."
msgid "This is a CD/DVD. It will be identified by the label (\"%1\")that you have set in your CD burning application. If you create further CDs for use with digikam in the future, please remember to give them a unique label as well."
msgid "This entry will only be identified by the path where it is found on your system (\"%1\"). No more specific means of identification (UUID, label) is available."
msgid "It is not possible on your system to identify the storage medium of this path. It will be added using the file path as the only identifier. This will work well for your local hard disk."
msgid "The database is not valid: the \"DBVersion\" setting does not exist. The current database schema version cannot be verified. Try to start with an empty database. "
msgid "The database has been used with a more recent version of digiKam and has been updated to a database schema which cannot be used with this version. (This means this digiKam version is too old, or the database format is too recent.) Please use the more recent version of digiKam that you used before. "
msgid "Failed to open a database transaction on your database file \"%1\". This is unusual. Please check that you can access the file and no other process has currently locked the file. If the problem persists you can get help from the digikam developers mailing list (see www.digikam.org/support). As well, please have a look at what digiKam prints on the console. "
msgid "The schema updating process from version 4 to 6 failed, caused by an error that we did not expect. You can try to discard your old database and start with an empty one. (In this case, please move the database files \"%1\" and \"%2\" from the directory \"%3\"). More probably you will want to report this error to the digikam developers mailing list (see www.digikam.org/support). As well, please have a look at what digiKam prints on the console. "
msgid "Failed to update the database schema from version %1 to version %2. Please read the error messages printed on the console and report this error as a bug at bugs.kde.org. "
msgid "The database update action cannot be found. Please ensure that the dbconfig.xml file of the current version of digiKam is installed at the correct place. "
msgid "Failed to copy the old database file (\"%1\") to its new location (\"%2\"). Error message: \"%3\". Please make sure that the file can be copied, or delete it."
msgid "The old database file (\"%1\") has been copied to the new location (\"%2\") but it cannot be opened. Please delete both files and try again, starting with an empty database. "
msgid "No album library path has been found in the configuration file. Giving up the schema updating process. Please try with an empty database, or repair your configuration."
msgid "There was an error associating your albumLibraryPath (\"%1\") with a storage volume of your system. This problem may indicate that there is a problem with your installation. If you are working on Linux, check that HAL is installed and running. In any case, you can seek advice from the digikam developers mailing list (see www.digikam.org/support). The database updating process will now be aborted because we do not want to create a new database based on false assumptions from a broken installation."
msgid "Could not open the configuration file <b>%1</b>. This file is installed with the digikam application and is absolutely required to run digikam. Please check your installation."
msgid "An old version of the configuration file <b>%1</b> is found. Please ensure that the version released with the running version of digiKam is installed. "
msgid "The database is not valid: the \"DBSimilarityVersion\" setting does not exist. The current database schema version cannot be verified. Try to start with an empty database. "
msgid "The database has been used with a more recent version of digiKam and has been updated to a database schema which cannot be used with this version. (This means this digiKam version is too old, or the database format is to recent) Please use the more recent version of digikam that you used before. "
msgstr ""
#. +> trunk5
#: core/libs/database/tags/facetags.cpp:377
#, kde-format
msgctxt "People on your photos"
msgid "People"
msgstr ""
#. +> trunk5
#: core/libs/database/tags/facetags.cpp:421
#, kde-format
msgctxt "The list of detected faces from the collections but not recognized"
msgid "Unknown"
msgstr ""
#. +> trunk5
#: core/libs/database/tags/facetags.cpp:441
#, kde-format
msgctxt "The list of recognized faces from the collections but not confirmed"
msgid "The database is not valid: the \"DBThumbnailsVersion\" setting does not exist. The current database schema version cannot be verified. Try to start with an empty database. "
"<p>Select here the type of database backend.</p>"
"<p><b>SQlite</b> backend is for local database storage with a small or medium collection sizes. It is the default and recommended backend for collections with less than 100K items.</p>"
"<p><b>MySQL Internal</b> backend is for local database storage with huge collection sizes. This backend is recommend for local collections with more than 100K items.</p>"
"<p><i>Be careful: this one still in experimental stage.</i></p>"
"<p><b>MySQL Server</b> backend is a more robust solution especially for remote and shared database storage. It is also more efficient to manage huge collection sizes with more than 100K items.</p>"
"<p><i>Be careful: this one still in experimental stage.</i></p>"
"<p>Set here the location where the database files will be stored on your system. There are three databases: one for all collections properties, one to store compressed thumbnails, and one to store faces recognition metadata.<br/>"
"Write access is required to be able to edit image properties.</p>"
"<p>Databases are digiKam core engines. Take care to use a place hosted by fast hardware (as SSD) with enough free space especially for thumbnails database.</p>"
"<p>Note: a remote file system such as NFS, cannot be used here. For performance reasons, it is also recommended not to use removable media.</p>"
msgid "<p>Here you can configure locations where MySQL binary tools are located. digiKam will try to find these binaries automatically if they are already installed on your computer.</p>"
"<p>digiKam expects that database is already created with a dedicated user account. This user name <i>digikam</i> will require full access to the database.<br/>"
"If your database is not already set up, you can use the following SQL commands (after replacing the <b><i>password</i></b> with the correct one).<br>"
"<p>Note: with a Linux server, a database can be initialized following the commands below:</p>"
"<p># su</p>"
"<p># systemctl restart mysqld</p>"
"<p># mysql -u root</p>"
"<p>...</p>"
"<p>Enter SQL code to Mysql prompt in order to init digiKam databases with grant privileges (see behind)</p>"
"<p>...</p>"
"<p>quit</p>"
"<p>NOTE: If you have an enormous collection, you should start MySQL server with mysql --max_allowed_packet=128M OR in my.ini or ~/.my.cnf, change the settings</p>"
"<p>Use this configuration view to set all information to be connected to a remote <a href=\"https://en.wikipedia.org/wiki/MySQL\">Mysql database server</a> (or <a href=\"https://en.wikipedia.org/wiki/MariaDB\">MariaDB</a>) through a network. As with Sqlite or MySQL internal server, 3 databases will be stored on the remote server: one for all collections properties, one to store compressed thumbnails, and one to store faces recognition metadata.</p>"
"<p>Unlike Sqlite or MySQL internal server, you can customize the database names to simplify your backups.</p>"
"<p>Databases are digiKam core engines. To prevent performance issues, take a care to use a fast network link between the client and the server computers. It is also recommended to host database files on fast hardware (as <a href=\"https://en.wikipedia.org/wiki/Solid-state_drive\">SSD</a>) with enough free space, especially for thumbnails database, even if data are compressed using wavelets image format <a href=\"https://en.wikipedia.org/wiki/Progressive_Graphics_File\">PGF</a>.</p>"
"<p>The databases must be created previously on the remote server by the administrator. Look in <b>Requirements</b> tab for details.</p>"
"<p>Simulate black and white film exposure using a green filter. This is useful for all scenic shoots, especially portraits photographed against the sky.</p>"
"<p>Simulate black and white film exposure using a yellow filter. This has the most natural tonal correction, and improves contrast. Ideal for landscapes.</p>"
"<p>Simulate black and white film exposure using a yellow-green filter. A yellow-green filter is highly effective for outdoor portraits because red is rendered dark while green appears lighter. Great for correcting skin tones, bringing out facial expressions in close-ups and emphasizing the feeling of liveliness. This filter is highly effective for indoor portraits under tungsten lighting.</p>"
"<p>Gives a warm highlight and mid-tone while adding a bit of coolness to the shadows - very similar to the process of bleaching a print and re-developing in a sepia toner.</p>"
msgid "With this button, you can pick the color from original image used to set <b>Shadow Tone</b> smooth curves point on Red, Green, Blue, and Luminosity channels."
msgid "With this button, you can pick the color from original image used to set <b>Middle Tone</b> smooth curves point on Red, Green, Blue, and Luminosity channels."
msgid "With this button, you can pick the color from original image used to set <b>Highlight Tone</b> smooth curves point on Red, Green, Blue, and Luminosity channels."
msgid "Enable this option if you want to preserve the aspect ratio of image. If enabled, the border width will be a percentage of the image size, else the border width will be in pixels."
msgid "Total smoothing power: if the Detail Factor sets the relative smoothing and the Anisotropy Factor the direction, the Smoothing Factor sets the overall effect."
msgid "<b>Function</b>: This function combines the original RGB channels with the desaturated blurred image. This function is used in each of the tonemapping stages. It can be linear or power. Basically, this function increases the values where both the original and blurred image's value are low and do the opposite on high values."
msgid "<b>Highlights saturation</b>: Usually the (perceived) saturation is increased. The user can choose to lower the saturation on original highlight and shadows from the image with these parameters."
msgid "<b>Shadow saturation</b>: Usually the (perceived) saturation is increased. The user can choose to lower the saturation on original highlight and shadows from the image with these parameters."
msgid "This value is the radius of the inner circle of the filter. In the inner circle the image is preserved. It is expressed as a multiple of the outer radius of the filter."
msgid "This value is the radius of the outer circle of the filter. Outside the outer circle the effect of the filter is at its maximum. It is expressed as a multiple of the diagonal of the image."
msgid "This is the camera maker description string found in image meta-data. This one is used to query and find relevant camera device information from Lensfun database."
msgid "This is the camera model description string found in image meta-data. This one is used to query and found relevant camera device information from Lensfun database."
msgid "This is the lens description string found in image meta-data. This one is used to query and found relevant lens information from Lensfun database."
msgid "Vignetting refers to an image darkening, mostly in the corners. Optical and natural vignetting can be canceled out with this option, whereas mechanical vignetting will not be cured."
msgid "Distortion refers to an image deformation, which is most pronounced towards the corners. These Seidel aberrations are known as pincushion and barrel distortions."
msgid "<b>Note: lens correction options depend of filters available in LensFun library. See <a href='http://lensfun.sourceforge.net'>LensFun project web site</a> for more information.</b>"
"<p>If the image's maximal counts are small, you can use the <b>linear</b> scale.</p>"
"<p><b>Logarithmic</b> scale can be used when the maximal counts are big; if it is used, all values (small and large) will be visible on the graph.</p>"
msgid "<b>Alpha</b>: display the alpha image-channel values. This channel corresponds to the transparency value and is supported by some image formats, such as PNG or TIF."
msgid "<b>Threshold</b>: Adjusts the threshold for denoising of the image in a range from 0.0 (none) to 10.0. The threshold is the value below which everything is considered noise."
msgstr ""
#. +> trunk5
#: core/libs/dimg/filters/nr/nrsettings.cpp:119
#, kde-format
msgid "<b>Softness</b>: This adjusts the softness of the thresholding (soft as opposed to hard thresholding). The higher the softness the more noise remains in the image."
msgstr ""
#. +> trunk5
#: core/libs/dimg/filters/nr/nrsettings.cpp:125
#, kde-format
msgid "Estimate Noise"
msgstr ""
#. +> trunk5
#: core/libs/dimg/filters/nr/nrsettings.cpp:126
#, kde-format
msgid "Compute automatically all noise reduction settings by a parse of noise contained in image."
msgid "This is the radius of the circular convolution. It is the most important parameter for using this tool. For most images the default value of 1.0 should give good results. Select a higher value when your image is very blurred."
msgid "Increasing the correlation may help to reduce artifacts. The correlation can range from 0-1. Useful values are 0.5 and values close to 1, e.g. 0.95 and 0.99. Using a high value for the correlation will reduce the sharpening effect of the tool."
msgid "Increasing the noise filter parameter may help to reduce artifacts. The noise filter can range from 0-1 but values higher than 0.1 are rarely helpful. When the noise filter value is too low, e.g. 0.0 the image quality will be very poor. A useful value is 0.01. Using a high value for the noise filter will reduce the sharpening effect of the tool."
msgid "This is the sharpness for the Gaussian convolution. Use this parameter when your blurring is of a Gaussian type. In most cases you should set this parameter to 0, because it causes nasty artifacts. When you use non-zero values, you will probably also have to increase the correlation and/or noise filter parameters."
msgid "This parameter determines the size of the transformation matrix. Increasing the matrix width may give better results, especially when you have chosen large values for circular or Gaussian sharpness."
msgid "<font color='red'><i>Warning: <a href='http://en.wikipedia.org/wiki/JPEG'>JPEG</a> is a lossy image compression format.</i></font>"
msgstr ""
#. +> trunk5
#: core/libs/dimg/loaders/jpegsettings.cpp:107
#, kde-format
msgid "Chroma subsampling:"
msgstr ""
#. +> trunk5
#: core/libs/dimg/loaders/jpegsettings.cpp:110
#, kde-format
msgid "4:4:4 (best quality)"
msgstr ""
#. +> trunk5
#: core/libs/dimg/loaders/jpegsettings.cpp:111
#, kde-format
msgid "4:2:2 (good quality)"
msgstr ""
#. +> trunk5
#: core/libs/dimg/loaders/jpegsettings.cpp:112
#, kde-format
msgid "4:2:0 (low quality)"
msgstr ""
#. +> trunk5
#: core/libs/dimg/loaders/jpegsettings.cpp:113
#, kde-format
msgid "4:1:1 (low quality)"
msgstr ""
#. +> trunk5
#: core/libs/dimg/loaders/jpegsettings.cpp:114
#, kde-format
msgid ""
"<p>Chroma subsampling reduces file size by taking advantage of the eye's lesser sensitivity to color resolution. How perceptible the difference is depends on the image - large photos will generally show no difference, while sharp, down-scaled pixel graphics may lose fine color detail.</p>"
"<p><b>4:4:4</b> - No chroma subsampling, highest quality but lowest compression.</p>"
"<p><b>4:2:2</b> - Chroma halved horizontally, average compression, average quality.</p>"
"<p><b>4:2:0</b> - Chroma quartered in 2x2 blocks, high compression but low quality.</p>"
"<p><b>4:1:1</b> - Chroma quartered in 4x1 blocks, high compression but low quality.</p>"
msgid "The database is not valid: the \"DBFaceVersion\" setting does not exist. The current database schema version cannot be verified. Try to start with an empty database. "
msgid "The database has been used with a more recent version of digiKam and has been updated to a database schema which cannot be used with this version. (This means this digiKam version is too old, or the database format is to recent.) Please use the more recent version of digiKam that you used before."
"Background color indicates the global image filter status, encompassing all filter settings from the right sidebar.\n"
"\n"
"NO COLOR: no filter is active, all items are visible.\n"
"RED: filtering is on, but no items match.\n"
"GREEN: filter(s) match(es) at least one item.\n"
"\n"
"Move mouse cursor over this text to see more details about active filters.\n"
"Press the Reset button from the right side to clear all filter settings.\n"
"Press the Settings button from the right side to open the filters panel."
msgstr ""
#. +> trunk5
#: core/libs/filters/filterstatusbar.cpp:96
#, kde-format
msgid "Reset all active filters"
msgstr ""
#. +> trunk5
#: core/libs/filters/filterstatusbar.cpp:102
#, kde-format
msgid "Open filter settings panel"
msgstr ""
#. +> trunk5
#: core/libs/filters/filterstatusbar.cpp:132
#, kde-format
msgid ""
"<br/>"
"<nobr><i>Text</i></nobr>"
msgstr ""
#. +> trunk5
#: core/libs/filters/filterstatusbar.cpp:137
#, kde-format
msgid ""
"<br/>"
"<nobr><i>Mime Type</i></nobr>"
msgstr ""
#. +> trunk5
#: core/libs/filters/filterstatusbar.cpp:142
#, kde-format
msgid ""
"<br/>"
"<nobr><i>Geolocation</i></nobr>"
msgstr ""
#. +> trunk5
#: core/libs/filters/filterstatusbar.cpp:147
#, kde-format
msgid ""
"<br/>"
"<nobr><i>Rating</i></nobr>"
msgstr ""
#. +> trunk5
#: core/libs/filters/filterstatusbar.cpp:152
#, kde-format
msgid ""
"<br/>"
"<nobr><i>Pick Labels</i></nobr>"
msgstr ""
#. +> trunk5
#: core/libs/filters/filterstatusbar.cpp:157
#, kde-format
msgid ""
"<br/>"
"<nobr><i>Color Labels</i></nobr>"
msgstr ""
#. +> trunk5
#: core/libs/filters/filterstatusbar.cpp:162
#, kde-format
msgid ""
"<br/>"
"<nobr><i>Tags</i></nobr>"
msgstr ""
#. +> trunk5
#: core/libs/filters/filterstatusbar.cpp:167
#, kde-format
msgid "<nobr><b>Active filters:</b></nobr>"
msgstr ""
#. +> trunk5
#: core/libs/filters/filterstatusbar.cpp:171
#, kde-format
msgid "<nobr><b>Active filter:</b></nobr>"
msgstr ""
#. +> trunk5
#: core/libs/filters/filterstatusbar.cpp:178
#, kde-format
msgid "No active filter"
msgstr ""
#. +> trunk5
#: core/libs/filters/filterstatusbar.cpp:187
#, kde-format
msgid "One active filter"
msgstr ""
#. +> trunk5
#: core/libs/filters/filterstatusbar.cpp:191
#, kde-format
msgid "1 active filter"
msgid_plural "%1 active filters"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5
#: core/libs/filters/geolocationfilter.cpp:37
#, kde-format
msgid "No geo filtering"
msgstr ""
#. +> trunk5
#: core/libs/filters/geolocationfilter.cpp:38
#, kde-format
msgid "Images with coordinates"
msgstr ""
#. +> trunk5
#: core/libs/filters/geolocationfilter.cpp:39
#, kde-format
msgid "Images without coordinates"
msgstr ""
#. +> trunk5
#: core/libs/filters/geolocationfilter.cpp:41
#, kde-format
msgid "Filter by geolocation"
msgstr ""
#. +> trunk5
#: core/libs/filters/geolocationfilter.cpp:42
#, kde-format
msgid "Select how geolocation should affect the images which are shown."
msgstr ""
#. +> trunk5
#: core/libs/filters/mimefilter.cpp:36
#, kde-format
msgid "All Files"
msgstr ""
#. +> trunk5
#: core/libs/filters/mimefilter.cpp:37
#: core/utilities/setup/album/setupmime.cpp:105
#, kde-format
msgid "Image Files"
msgstr ""
#. +> trunk5
#: core/libs/filters/mimefilter.cpp:38
#, kde-format
msgid "No RAW Files"
msgstr ""
#. +> trunk5
#: core/libs/filters/mimefilter.cpp:39
#, kde-format
msgid "JPEG Files"
msgstr ""
#. +> trunk5
#: core/libs/filters/mimefilter.cpp:40
#, kde-format
msgid "PNG Files"
msgstr ""
#. +> trunk5
#: core/libs/filters/mimefilter.cpp:41
#, kde-format
msgid "TIFF Files"
msgstr ""
#. +> trunk5
#: core/libs/filters/mimefilter.cpp:42
#, kde-format
msgid "DNG Files"
msgstr ""
#. +> trunk5
#: core/libs/filters/mimefilter.cpp:43
#, kde-format
msgid "RAW Files"
msgstr ""
#. +> trunk5
#: core/libs/filters/mimefilter.cpp:44
#: core/utilities/setup/album/setupmime.cpp:137
#, kde-format
msgid "Video Files"
msgstr ""
#. +> trunk5
#: core/libs/filters/mimefilter.cpp:45
#: core/utilities/setup/album/setupmime.cpp:172
#, kde-format
msgid "Audio Files"
msgstr ""
#. +> trunk5
#: core/libs/filters/mimefilter.cpp:46
#, kde-format
msgid "Raster Graphics"
msgstr ""
#. +> trunk5
#: core/libs/filters/mimefilter.cpp:48
#, kde-format
msgid "Filter by file type"
msgstr ""
#. +> trunk5
#: core/libs/filters/mimefilter.cpp:49
#, kde-format
msgid "Select the file types (MIME types) that you want shown. Note: \"Raster Graphics\" are file formats from raster graphics editors, such as Photoshop, The Gimp, Krita, etc."
msgstr ""
#. +> trunk5
#: core/libs/filters/ratingfilter.cpp:75
#, kde-format
msgid "Select the rating value used to filter albums' contents. Use the context pop-up menu to set rating filter conditions."
msgstr ""
#. +> trunk5
#: core/libs/filters/ratingfilter.cpp:173
#, kde-format
msgid "Rating greater than or equal to %1."
msgstr ""
#. +> trunk5
#: core/libs/filters/ratingfilter.cpp:178
#, kde-format
msgid "Rating equal to %1."
msgstr ""
#. +> trunk5
#: core/libs/filters/ratingfilter.cpp:183
#, kde-format
msgid "Rating less than or equal to %1."
msgstr ""
#. +> trunk5
#: core/libs/filters/ratingfilter.cpp:227
#, kde-format
msgid "Rating Filter Options"
msgstr ""
#. +> trunk5
#: core/libs/filters/ratingfilter.cpp:232
#, kde-format
msgid "Greater Than or Equals Condition"
msgstr ""
#. +> trunk5
#: core/libs/filters/ratingfilter.cpp:234
#, kde-format
msgid "Equals Condition"
msgstr ""
#. +> trunk5
#: core/libs/filters/ratingfilter.cpp:236
#, kde-format
msgid "Less Than or Equals Condition"
msgstr ""
#. +> trunk5
#: core/libs/filters/ratingfilter.cpp:239
#, kde-format
msgid "Exclude Items Without Rating"
msgstr ""
#. +> trunk5
#: core/libs/filters/textfilter.cpp:81
#, kde-format
msgid "Text quick filter (search)"
msgstr ""
#. +> trunk5
#: core/libs/filters/textfilter.cpp:82
#, kde-format
msgid "Enter search patterns to quickly filter this view on item names, captions (comments), and tags"
msgstr ""
#. +> trunk5
#: core/libs/filters/textfilter.cpp:86
#, kde-format
msgid "Text Search Fields"
msgstr ""
#. +> trunk5
#: core/libs/filters/textfilter.cpp:89
#, kde-format
msgid "Defines which fields to search for the text in."
msgid "Enter the text used to create tags here. '/' can be used to create a hierarchy of tags. ',' can be used to create more than one hierarchy at the same time."
"<para>If enabled, all RAW files will be decoded in 16-bit color depth using a linear gamma curve. To prevent dark picture rendering in the editor, it is recommended to use Color Management in this mode.</para>"
"<para>If disabled, all RAW files will be decoded in 8-bit color depth with a BT.709 gamma curve and a 99th-percentile white point. This mode is faster than 16-bit decoding.</para>"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:252
#, kde-format
msgctxt "@option:check"
msgid "Interpolate RGB as four colors"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:253
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Interpolate RGB as four colors</title>"
"<para>The default is to assume that all green pixels are the same. If even-row green pixels are more sensitive to ultraviolet light than odd-row this difference causes a mesh pattern in the output; using this option solves this problem with minimal loss of detail.</para>"
"<para>To resume, this option blurs the image a little, but it eliminates false 2x2 mesh patterns with VNG quality method or mazes with AHD quality method.</para>"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:267
#, kde-format
msgctxt "@info:tooltip"
msgid "Visit LibRaw project website"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:277
#, kde-format
msgctxt "@option:check"
msgid "Do not stretch or rotate pixels"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:279
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Do not stretch or rotate pixels</title>"
"<para>For Fuji Super CCD cameras, show the image tilted 45 degrees. For cameras with non-square pixels, do not stretch the image to its correct aspect ratio. In any case, this option guarantees that each output pixel corresponds to one RAW pixel.</para>"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:287
#, kde-format
msgctxt "@label:listbox"
msgid "Quality:"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:291
#, kde-format
msgctxt "@item:inlistbox Quality"
msgid "Bilinear"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:292
#, kde-format
msgctxt "@item:inlistbox Quality"
msgid "VNG"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:293
#, kde-format
msgctxt "@item:inlistbox Quality"
msgid "PPG"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:294
#, kde-format
msgctxt "@item:inlistbox Quality"
msgid "AHD"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:295
#, kde-format
msgctxt "@item:inlistbox Quality"
msgid "DCB"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:296
#, kde-format
msgctxt "@item:inlistbox Quality"
msgid "DHT"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:297
#, kde-format
msgctxt "@item:inlistbox Quality"
msgid "AAHD"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:301
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Quality (interpolation)</title>"
"<para>Select here the demosaicing method to use when decoding RAW images. A demosaicing algorithm is a digital image process used to interpolate a complete image from the partial raw data received from the color-filtered image sensor, internal to many digital cameras, in form of a matrix of colored pixels. Also known as CFA interpolation or color reconstruction, another common spelling is demosaicing. The following methods are available for demosaicing RAW images:</para>"
"<para>"
"<list>"
"<item><emphasis strong='true'>Bilinear</emphasis>: use high-speed but low-quality bilinear interpolation (default - for slow computers). In this method, the red value of a non-red pixel is computed as the average of the adjacent red pixels, and similarly for blue and green.</item>"
"<item><emphasis strong='true'>VNG</emphasis>: use Variable Number of Gradients interpolation. This method computes gradients near the pixel of interest and uses the lower gradients (representing smoother and more similar parts of the image) to make an estimate.</item>"
"<item><emphasis strong='true'>PPG</emphasis>: use Patterned-Pixel-Grouping interpolation. Pixel Grouping uses assumptions about natural scenery in making estimates. It has fewer color artifacts on natural images than the Variable Number of Gradients method.</item>"
"<item><emphasis strong='true'>AHD</emphasis>: use Adaptive Homogeneity-Directed interpolation. This method selects the direction of interpolation so as to maximize a homogeneity metric, thus typically minimizing color artifacts.</item>"
"<item><emphasis strong='true'>DCB</emphasis>: DCB interpolation from linuxphoto.org project.</item>"
"<item><emphasis strong='true'>DHT</emphasis>: DHT interpolation.See https://www.libraw.org/node/2306 for details.</item>"
"<item><emphasis strong='true'>AAHD</emphasis>: modified AHD interpolation.</item>"
"</list>"
"</para>"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:349
#, kde-format
msgctxt "@label:slider"
msgid "Pass:"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:350
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Pass</title>"
"<para>Set here the passes used by the median filter applied after interpolation to Red-Green and Blue-Green channels.</para>"
"<para>This setting is only available for specific Quality options: <emphasis strong='true'>Bilinear</emphasis>, <emphasis strong='true'>VNG</emphasis>, <emphasis strong='true'>PPG</emphasis>, <emphasis strong='true'>AHD</emphasis>, <emphasis strong='true'>DCB</emphasis>, and <emphasis strong='true'>VCD & AHD</emphasis>.</para>"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:362
#, kde-format
msgctxt "@option:check"
msgid "Refine interpolation"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:363
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Refine interpolation</title>"
"<para>This setting is available only for few Quality options:</para>"
"<para>"
"<list>"
"<item><emphasis strong='true'>DCB</emphasis>: turn on the enhance interpolated colors filter.</item>"
"<item><emphasis strong='true'>VCD & AHD</emphasis>: turn on the enhanced effective color interpolation (EECI) refine to improve sharpness.</item>"
"</list>"
"</para>"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:376
#, kde-format
msgctxt "@label"
msgid "Demosaicing"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:384
#, kde-format
msgctxt "@label:listbox"
msgid "Method:"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:386
#, kde-format
msgctxt "@item:inlistbox"
msgid "Default D65"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:387
#, kde-format
msgctxt "@item:inlistbox"
msgid "Camera"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:388
#, kde-format
msgctxt "@item:inlistbox set while balance automatically"
msgid "Automatic"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:389
#, kde-format
msgctxt "@item:inlistbox set white balance manually"
msgid "Manual"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:391
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>White Balance</title>"
"<para>Configure the raw white balance:</para>"
"<para>"
"<list>"
"<item><emphasis strong='true'>Default D65</emphasis>: Use a standard daylight D65 white balance.</item>"
"<item><emphasis strong='true'>Camera</emphasis>: Use the white balance specified by the camera. If not available, reverts to default neutral white balance.</item>"
"<item><emphasis strong='true'>Automatic</emphasis>: Calculates an automatic white balance averaging the entire image.</item>"
"<item><emphasis strong='true'>Manual</emphasis>: Set a custom temperature and green level values.</item>"
"</list>"
"</para>"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:406
#, kde-format
msgctxt "@label:slider"
msgid "T(K):"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:407
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Temperature</title>"
"<para>Set here the color temperature in Kelvin.</para>"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:414
#, kde-format
msgctxt "@label:slider Green component"
msgid "Green:"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:415
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid "<para>Set here the green component to set magenta color cast removal level.</para>"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:418
#, kde-format
msgctxt "@label:listbox"
msgid "Highlights:"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:420
#, kde-format
msgctxt "@item:inlistbox"
msgid "Solid white"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:421
#, kde-format
msgctxt "@item:inlistbox"
msgid "Unclip"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:422
#, kde-format
msgctxt "@item:inlistbox"
msgid "Blend"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:423
#, kde-format
msgctxt "@item:inlistbox"
msgid "Rebuild"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:425
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Highlights</title>"
"<para>Select here the highlight clipping method:</para>"
"<para>"
"<list>"
"<item><emphasis strong='true'>Solid white</emphasis>: clip all highlights to solid white</item>"
"<item><emphasis strong='true'>Unclip</emphasis>: leave highlights unclipped in various shades of pink</item>"
"<item><emphasis strong='true'>Blend</emphasis>:Blend clipped and unclipped values together for a gradual fade to white</item>"
"<item><emphasis strong='true'>Rebuild</emphasis>: reconstruct highlights using a level value</item>"
"<para>Specify the reconstruct highlight level. Low values favor whites and high values favor colors.</para>"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:444
#, kde-format
msgctxt "@option:check"
msgid "Exposure Correction (E.V)"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:445
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid "<para>Turn on the exposure correction before interpolation.</para>"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:448
#, kde-format
msgctxt "@label:slider"
msgid "Linear Shift:"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:453
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Shift</title>"
"<para>Linear Shift of exposure correction before interpolation in E.V</para>"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:456
#, kde-format
msgctxt "@label:slider"
msgid "Highlight:"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:461
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Highlight</title>"
"<para>Amount of highlight preservation for exposure correction before interpolation in E.V. Only take effect if Shift Correction is > 1.0 E.V</para>"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:465
#, kde-format
msgctxt "@option:check"
msgid "Correct false colors in highlights"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:466
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid "<para>If enabled, images with overblown channels are processed much more accurately, without 'pink clouds' (and blue highlights under tungsten lamps).</para>"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:470
#, kde-format
msgctxt "@option:check"
msgid "Auto Brightness"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:471
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid "<para>If disable, use a fixed white level and ignore the image histogram to adjust brightness.</para>"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:474
#, kde-format
msgctxt "@label:slider"
msgid "Brightness:"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:479
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Brightness</title>"
"<para>Specify the brightness level of output image. The default value is 1.0 (works in 8-bit mode only).</para>"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:489
#, kde-format
msgctxt "@option:check Black point"
msgid "Black:"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:490
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Black point</title>"
"<para>Use a specific black point value to decode RAW pictures. If you set this option to off, the Black Point value will be automatically computed.</para>"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:497
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Black point value</title>"
"<para>Specify specific black point value of the output image.</para>"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:500
#, kde-format
msgctxt "@option:check White point"
msgid "White:"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:501
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>White point</title>"
"<para>Use a specific white point value to decode RAW pictures. If you set this option to off, the White Point value will be automatically computed.</para>"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:508
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>White point value</title>"
"<para>Specify specific white point value of the output image.</para>"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:547
#, kde-format
msgctxt "@label"
msgid "White Balance"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:555
#, kde-format
msgctxt "@label:listbox"
msgid "Noise reduction:"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:557
#, kde-format
msgctxt "@item:inlistbox Noise Reduction"
msgid "None"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:558
#, kde-format
msgctxt "@item:inlistbox Noise Reduction"
msgid "Wavelets"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:559
#, kde-format
msgctxt "@item:inlistbox Noise Reduction"
msgid "FBDD"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:561
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Noise Reduction</title>"
"<para>Select here the noise reduction method to apply during RAW decoding.</para>"
"<para>"
"<list>"
"<item><emphasis strong='true'>None</emphasis>: no noise reduction.</item>"
"<item><emphasis strong='true'>Wavelets</emphasis>: wavelets correction to erase noise while preserving real detail. It is applied after interpolation.</item>"
"<item><emphasis strong='true'>FBDD</emphasis>: Fake Before Demosaicing Denoising noise reduction. It is applied before interpolation.</item>"
"</list>"
"</para>"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:586
#, kde-format
msgctxt "@label"
msgid "Corrections"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:594
#, kde-format
msgctxt "@label:listbox"
msgid "Camera Profile:"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:596
#, kde-format
msgctxt "@item:inlistbox Camera Profile"
msgid "None"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:597
#, kde-format
msgctxt "@item:inlistbox Camera Profile"
msgid "Embedded"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:598
#, kde-format
msgctxt "@item:inlistbox Camera Profile"
msgid "Custom"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:600
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Camera Profile</title>"
"<para>Select here the input color space used to decode RAW data.</para>"
"<para>"
"<list>"
"<item><emphasis strong='true'>None</emphasis>: no input color profile is used during RAW decoding.</item>"
"<item><emphasis strong='true'>Embedded</emphasis>: use embedded color profile from RAW file, if it exists.</item>"
"<item><emphasis strong='true'>Custom</emphasis>: use a custom input color space profile.</item>"
"</list>"
"</para>"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:611
#: core/libs/rawengine/drawdecoderwidget.cpp:645
#, kde-format
msgid "ICC Files (*.icc *.icm)"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:613
#, kde-format
msgctxt "@label:listbox"
msgid "Workspace:"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:615
#, kde-format
msgctxt "@item:inlistbox Workspace"
msgid "Raw (no profile)"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:616
#, kde-format
msgctxt "@item:inlistbox Workspace"
msgid "sRGB"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:617
#, kde-format
msgctxt "@item:inlistbox Workspace"
msgid "Adobe RGB"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:618
#, kde-format
msgctxt "@item:inlistbox Workspace"
msgid "Wide Gamut"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:619
#, kde-format
msgctxt "@item:inlistbox Workspace"
msgid "Pro-Photo"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:620
#, kde-format
msgctxt "@item:inlistbox Workspace"
msgid "Custom"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:622
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Workspace</title>"
"<para>Select here the output color space used to decode RAW data.</para>"
"<para>"
"<list>"
"<item><emphasis strong='true'>Raw (linear)</emphasis>: in this mode, no output color space is used during RAW decoding.</item>"
"<item><emphasis strong='true'>sRGB</emphasis>: this is an RGB color space, created cooperatively by Hewlett-Packard and Microsoft. It is the best choice for images destined for the Web and portrait photography.</item>"
"<item><emphasis strong='true'>Adobe RGB</emphasis>: this color space is an extended RGB color space, developed by Adobe. It is used for photography applications such as advertising and fine art.</item>"
"<item><emphasis strong='true'>Wide Gamut</emphasis>: this color space is an expanded version of the Adobe RGB color space.</item>"
"<item><emphasis strong='true'>Pro-Photo</emphasis>: this color space is an RGB color space, developed by Kodak, that offers an especially large gamut designed for use with photographic outputs in mind.</item>"
"<item><emphasis strong='true'>Custom</emphasis>: use a custom output color space profile.</item>"
"</list>"
"</para>"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:657
#, kde-format
msgctxt "@label"
msgid "Color Management"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:850
#, kde-format
msgctxt "@label"
msgid "Threshold:"
msgstr ""
#. +> trunk5
#: core/libs/rawengine/drawdecoderwidget.cpp:851
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Threshold</title>"
"<para>Set here the noise reduction threshold value to use.</para>"
msgid "Enter the Informative Provider Reference here. I.P.R is a name registered with the XMP/NAA, identifying the provider that provides an indicator of the content. The default value for the I.P.R is \"XMP\" if a standard Reference Code is used."
msgstr ""
#. +> trunk5
#: core/libs/template/subjectedit.cpp:58
#, kde-format
msgid "Enter the Subject Reference Number here. Provides a numeric code to indicate the Subject Name plus optional Subject Matter and Subject Detail Names in the language of the service. Subject Reference is a number from the range 01000000 to 17999999 and represent a language independent international reference to a Subject. A Subject is identified by its Reference Number and corresponding Names taken from a standard lists given by XMP/NAA. If a standard reference code is used, these lists are the English language reference versions. This field is limited to 8 digit code."
msgstr ""
#. +> trunk5
#: core/libs/template/subjectedit.cpp:71
#, kde-format
msgid "Enter the Subject Name here. English language is used if you selected a standard XMP/NAA reference code."
msgstr ""
#. +> trunk5
#: core/libs/template/subjectedit.cpp:75
#, kde-format
msgid "Enter the Subject Matter Name here. English language is used if you selected a standard XMP/NAA reference code."
msgstr ""
#. +> trunk5
#: core/libs/template/subjectedit.cpp:79
#, kde-format
msgid "Enter the Subject Detail Name here. English language is used if you selected a standard XMP/NAA reference code."
msgstr ""
#. +> trunk5
#: core/libs/template/templatelist.cpp:80
#, kde-format
msgid "Here you can see the metadata template list managed by digiKam."
msgstr ""
#. +> trunk5
#: core/libs/template/templatelist.cpp:84
#, kde-format
msgid "Authors"
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:121
#, kde-format
msgid "Author Names:"
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:124
#, kde-format
msgid "Enter the names of the photograph's creators. Use semi-colons as separator here."
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:126
#, kde-format
msgid ""
"<p>This field should contain the names of the persons who created the photograph. If it is not appropriate to add the name of the photographer (for example, if the identity of the photographer needs to be protected) the name of a company or organization can also be used. Once saved, this field should not be changed by anyone. "
"<p>To enter more than one name, use <b>semi-colons as separators</b>.</p>"
"<p>With IPTC, this field is limited to 32 ASCII characters.</p>"
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:135
#, kde-format
msgid "Authors' Positions:"
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:138
#, kde-format
msgid "Enter the job titles of the authors here."
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:140
#, kde-format
msgid ""
"<p>This field should contain the job titles of the authors. Examples might include titles such as: Staff Photographer, Freelance Photographer, or Independent Commercial Photographer. Since this is a qualifier for the Author field, the Author field must also be filled out.</p>"
"<p>With IPTC, this field is limited to 32 ASCII characters.</p>"
"<p>(synonymous to Provider): Use the Provider field to identify who is providing the photograph. This does not necessarily have to be the author. If a photographer is working for a news agency such as Reuters or the Associated Press, these organizations could be listed here as they are \"providing\" the image for use by others. If the image is a stock photograph, then the group (agency) involved in supplying the image should be listed here.</p>"
"<p>With IPTC, this field is limited to 32 ASCII characters.</p>"
"In Europe you would use: Copyright {Year} {Copyright owner}, all rights reserved. \n"
"In Japan, for maximum protection, the following three items should appear in the copyright field of the IPTC Core: (a) the word, Copyright; (b) year of the first publication; and (c) name of the author. You may also wish to include the phrase \"all rights reserved\".</p>"
"<p>With XMP, you can include more than one copyright string using different languages.</p>"
"<p>With IPTC, this field is limited to 128 ASCII characters.</p>"
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:186
#, kde-format
msgid "Right Usage Terms:"
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:188
#, kde-format
msgid "Enter the list of instructions on how a resource can be legally used here."
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:189
#, kde-format
msgid ""
"<p>The Right Usage Terms field should be used to list instructions on how a resource can be legally used."
"<p>With XMP, you can include more than one right usage terms string using different languages.</p>"
msgid "Enter the original owner of the photograph here."
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:202
#, kde-format
msgid ""
"<p>The Source field should be used to identify the original owner or copyright holder of the photograph. The value of this field should never be changed after the information is entered following the image's creation. While not yet enforced by the custom panels, you should consider this to be a \"write-once\" field. The source could be an individual, an agency, or a member of an agency. To aid in later searches, it is suggested to separate any slashes \"/\" with a blank space. Use the form \"photographer / agency\" rather than \"photographer/agency.\" Source may also be different from Creator and from the names listed in the Copyright Notice.</p>"
"<p>With IPTC, this field is limited to 32 ASCII characters.</p>"
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:214
#: core/libs/template/templateviewer.cpp:167
#, kde-format
msgid "Instructions:"
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:217
#, kde-format
msgid "Enter the editorial notice here."
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:219
#, kde-format
msgid ""
"<p>The Instructions field should be used to list editorial instructions concerning the use of photograph.</p>"
"<p>With IPTC, this field is limited to 256 ASCII characters.</p>"
msgid "Minimal version number required for this binary is %1"
msgstr ""
#. +> trunk5
#: core/libs/widgets/files/dbinarysearch.cpp:106
#, kde-format
msgid "Find"
msgstr ""
#. +> trunk5
#: core/libs/widgets/files/dbinarysearch.cpp:108
#, kde-format
msgid " or <a href=\"%1\">download</a>"
msgstr ""
#. +> trunk5
#: core/libs/widgets/files/dbinarysearch.cpp:133
#, kde-format
msgid ""
"<qt>"
"<p><font color=\"red\"><b>Warning:</b> Some necessary binaries have not been found on your system. If you have these binaries installed, please click the 'Find' button to locate them on your system, otherwise please download and install them to proceed.</font></p>"
"</qt>"
msgstr ""
#. +> trunk5
#: core/libs/widgets/files/dbinarysearch.cpp:167
#, kde-format
msgid "A development version has been detect. There is no guarantee on the behavior of this binary."
msgid "Here you can switch between fixed font size and font size to be calculated dynamically and adjusted to changing environment (e.g. widget dimensions, paper size)."
"<p><b>Perceptual intent</b> causes the full gamut of the image to be compressed or expanded to fill the gamut of the destination device, so that gray balance is preserved but colorimetric accuracy may not be preserved.</p>"
"<p>In other words, if certain colors in an image fall outside of the range of colors that the output device can render, the image intent will cause all the colors in the image to be adjusted so that the every color in the image falls within the range that can be rendered and so that the relationship between colors is preserved as much as possible.</p>"
"<p>This intent is most suitable for display of photographs and images, and is the default intent.</p>"
"</li>"
"<li>"
"<p><b>Absolute Colorimetric intent</b> causes any colors that fall outside the range that the output device can render to be adjusted to the closest color that can be rendered, while all other colors are left unchanged.</p>"
"<p>This intent preserves the white point and is most suitable for spot colors (Pantone, TruMatch, logo colors, ....)</p>"
"</li>"
"<li>"
"<p><b>Relative Colorimetric intent</b> is defined such that any colors that fall outside the range that the output device can render are adjusted to the closest color that can be rendered, while all other colors are left unchanged. Proof intent does not preserve the white point.</p>"
"</li>"
"<li>"
"<p><b>Saturation intent</b> preserves the saturation of colors in the image at the possible expense of hue and lightness.</p>"
"<p>Implementation of this intent remains somewhat problematic, and the ICC is still working on methods to achieve the desired effects.</p>"
"<p>This intent is most suitable for business graphics such as charts, where it is more important that the colors be vivid and contrast well with each other rather than a specific color.</p>"
"<p>This area contains a CIE or chromaticity diagram. A CIE diagram is a representation of all the colors that a person with normal vision can see. This is represented by the colored sail-shaped area. In addition you will see a triangle that is superimposed on the diagram outlined in white. This triangle represents the outer boundaries of the color space of the device that is characterized by the inspected profile. This is called the device gamut.</p>"
"<p>In addition there are black dots and yellow lines on the diagram. Each black dot represents one of the measurement points that were used to create this profile. The yellow line represents the amount that each point is corrected by the profile, and the direction of this correction.</p>"
"<p>The ICC profile path seems to be invalid.</p>"
"<p>If you want to set it now, select \"Yes\", otherwise select \"No\". In this case, \"Color Management\" feature will be disabled until you solve this issue</p>"
msgid "<p><a href='http://en.wikipedia.org/wiki/Exif'>EXIF</a> - a standard used by most digital cameras today to store technical information (like aperture and shutter speed) about an image.</p>"
msgid "<p><a href='http://en.wikipedia.org/wiki/IPTC_Information_Interchange_Model'>IPTC</a> - an older standard used in digital photography to store photographer information in images.</p>"
msgid "<p><a href='http://en.wikipedia.org/wiki/Extensible_Metadata_Platform'>XMP</a> - a new standard used in digital photography, designed to replace IPTC.</p>"
msgid "This list shows the results for your renaming pattern. Red items indicate a name collision, either because the new name is equal to the current name, or because the name has already been assigned to another item."
msgid "<p>Enter your renaming pattern here. Use the access buttons to quickly add renaming options and modifiers. For further explanation, use the information button.</p>"
msgid "<p>Add a modifier to a renaming option. To activate this button, place the cursor behind a renaming option or an already assigned modifier.</p>"
"<p>This assistant will guide you to create and print a calendar with a selection of images taken from your collection.</p>"
"<p>This tool will also permit to set specific dates on your calendar using external data event files as <a href='http://en.wikipedia.org/wiki/VCalendar'>vCalendar</a>, and <a href='http://en.wikipedia.org/wiki/Icalendar'>iCalendar</a> formats.</p>"
msgid "Set automatic level selection (maximized) for pyramid blending, i.e. optimize image features (contrast, saturation, . . .) to be as global as possible."
msgid "Set the number of levels for pyramid blending. Balances towards local features (small number) or global features (high number). Additionally, a low number trades off quality of results for faster execution time and lower memory usage."
msgid "Force hard blend masks without averaging on finest scale. This is only useful for focus stacks with thin and high contrast features. It improves sharpness at the expense of increased noise."
msgid "Sets the relative weight of high-contrast pixels. Increasing this weight makes pixels with neighboring differently colored pixels contribute more to the final output. Particularly useful for focus stacks."
msgid "Use Color Appearance Modelling (CIECAM02) to render detailed colors. Your input files should have embedded ICC profiles. If no ICC profile is present, sRGB color space will be assumed. The difference between using this option and default color blending algorithm is very slight, and will be most noticeable when you need to blend areas of different primary colors together."
"<p>This tool fuses bracketed images with different exposure to make pseudo <a href='http://en.wikipedia.org/wiki/High_dynamic_range_imaging'>HDR image</a>.</p>"
"<p>It can also be used to <a href='https://en.wikipedia.org/wiki/Focus_stacking'>merge focus bracketed stack</a> to get a single image with increased depth of field.</p>"
"<p>This assistant will help you to configure how to import images before merging them to a single one.</p>"
"<p>Bracketed images must be taken with the same camera, in the same conditions, and if possible using a tripod.</p>"
"<p>For more information, please take a look at <a href='http://en.wikipedia.org/wiki/Bracketing'>this page</a></p>"
"<p>Now, we will pre-process bracketed images before fusing them.</p>"
"<p>To perform auto-alignment, the <b>%1</b> program from the <a href='%2'>%3</a> project will be used. Alignment must be performed if you have not used a tripod to take bracketed images. Alignment operations can take a while.</p>"
"<p>Pre-processing operations include Raw demosaicing. Raw images will be converted to 16-bit sRGB images with auto-gamma.</p>"
msgid "<p><i>Note:</i> removable media (such as USB drives or DVDs) and remote file systems (such as NFS, or Samba mounted with cifs/smbfs) are supported.</p>"
"<p>Set here if you want to store the information assigned to items in digiKam in the files' metadata, to improve interoperability with other photo management programs:</p>"
"<h1><b>Migrate configuration and metadata from digiKam 4</b></h1>"
"</p>"
"<p>You can choose here if you want to use the configuration and albums from digiKam 4 in new digiKam. Please note the following warnings:</p>"
"<p>Migration is done <b>at your own risk</b>. digiKam developers do not recommend it and do not support it. On the other hand, creating a new configuration might result in loss of tags and other metadata that was not embedded inside the pictures and was only available in digiKam 4's database.</p>"
"<p>In either case you are recommended to backup the configuration files and databases before proceeding.</p>"
"<p><i>Note:</i> using a preview is always faster than using the editor, especially when checking a series of shots. However, you cannot change or fix the image in preview mode. Note that if you want to compare images quickly, it is often better to use the light table: images can be displayed side-by-side, and synchronized zooming and panning can be performed.</p>"
"<p><i>Note:</i> loading a reduced version of an image is faster but can differ from the original, especially with Raw. In this case, a JPEG version of Raw pre-processed by camera is loaded, instead of the real image data. This JPEG image is embedded in the file metadata and is used by the camera to display a Raw image faster to a TV screen.</p>"
"<p><i>Note:</i> the Raw import tool is designed for advanced users who want to have the best control over the image. This requires more time in your workflow.</p>"
"<p>Congratulations. Your minimal setup is done.</p>"
"<p>Remember, you can customize more settings using the digiKam configuration panel. To learn more about the digiKam world, we recommend reading the <b>digiKam handbook</b> using the <b>Help/Handbook</b> menu entry (you need to install the separate digiKam documentation package.) You can also read the manual online from the <a href='http://www.digikam.org/docs'>digikam.org website</a>.</p>"
"<p>Press <b>Finish</b> to close this assistant. digiKam will scan your collection to register all albums in the database. Items including in albums are collected after startup stage in background.</p>"
"<p><i>Note:</i> depending on your collection size, this operation can take a while. If you cancel the scanning operation, it will start again in the next digiKam session.</p>"
"<p>When scanning has completed, at next start-up, digiKam will only check your collection to identify new albums - which is much faster. You can force digiKam to scan for new items manually using the <b>Tools->Maintenance->Scan for new items</b> menu entry.</p>"
"<p><i>Note:</i> tooltips show photograph and digiKam metadata on the fly, as the mouse moves over items. This can be useful when selecting items. Tooltips are displayed in the album folder view, album icon view, camera icon view, batch queue list, and thumb bar. From the digiKam configuration dialog, you can customize the contents of these tooltips and the fonts used.</p>"
"<p>You can ignore the following if you use digiKam for the first time:</p>"
"<p><b>Transition from digiKam 4</b></p>"
"<p>Configuration files from digiKam 4 are not migrated. The old database can still be used, you just need to choose the same locations for collections and database in the following dialogs. It is recommended to create a backup of your database before proceeding.</p>"
"<p>The new location for configuration files is %1 (old %2). There are unresolved problems reported when re-using old configuration files, so it is not recommended to do it for the moment, and at your own risk.</p>"
msgid "<b>JPEG output</b>: Using JPEG output, the panorama file will be smaller at the cost of information loss during compression. This is the easiest way to share the result, or print it online or in a shop."
msgid "<b>TIFF output</b>: Using TIFF output, you get the same color depth than your original photos using RAW images at the cost of a bigger panorama file."
msgid "<b>File name template</b>: Set here the base name of the files that will be saved. For example, if your template is <i>panorama</i> and if you chose a JPEG output, then your panorama will be saved with the name <i>panorama.jpg</i>. If you choose to save also the project file, it will have the name <i>panorama.pto</i>."
msgid "<b>Save project file</b>: You can keep the project file generated to stitch your panorama for further tweaking within <a href=\"http://hugin.sourceforge.net/\">Hugin</a> by checking this. This is useful if you want a different projection, modify the horizon or the center of the panorama, or modify the control points to get better results."
"<p><font color=\"orange\"><b>Warning:</b> One or more converted raw files already exists (they will be skipped during the copying process).</font></p>"
"<p>Congratulations. Your images are stitched into a panorama.</p>"
"<p>Your panorama will be created to the directory:<br />"
"<b>%1</b><br />"
"once you press the <i>Finish</i> button, with the name set below.</p>"
"<p>If you choose to save the project file, and if your images were raw images then the converted images used during the stitching process will be copied at the same time (those are TIFF files that can be big).</p>"
msgid "<b>Detect moving skies</b>: During the control points selection and matching, this option discards any points that are associated to a possible cloud. This is useful to prevent moving clouds from altering the control points matching process."
"<p>Now, we will pre-process images before stitching them.</p>"
"<p>Pre-processing operations include Raw demosaicing. Raw images will be converted to 16-bit sRGB images with auto-gamma.</p>"
"<p>Pre-processing also include a calculation of some control points to match overlaps between images. For that purpose, the <b>%1</b> program from the <a href='%2'>%3</a> project will be used.</p>"
"<p>You can generate quickly a <a href='https://en.wikipedia.org/wiki/Time-lapse_photography'>Time-lapse</a> movie from images</p>"
"<p>captured with a tripod mounted camera controlled with an <a href='https://en.wikipedia.org/wiki/Intervalometer#Photography'>intervalometer</a>.</p>"
"<p></p>"
"<p>You can also create a video presentation with transition</p>"
"<p>effects and audio tracks to show on a TV screen.</p>"
msgid "<i>An effect is an visual panning or zooming applied while an image is displayed. The effect duration will follow the number of frames used to render the image on video stream.</i>"
msgid "<i>A transition is an visual effect applied between two images. For some effects, the duration can depend of random values and can change while the slideshow.</i>"
msgid "Face detection is a time-consuming task. You can choose if you wish to employ all processor cores on your system, or work in the background only on one core. Warning: this features still experimental and it is disabled by default."
msgid "Use this option to restrict the duplicate search with some criteria, as to limit search to the album of reference image, or to exclude the album of reference image of the search."
msgid "Image fingerprints have not yet been generated for your collection. The Similarity Search Tools will not be operational without pre-generated fingerprints. Please generate the fingerprints first."
msgid "Sets the maximum time difference to interpolate GPX file points to image time data. If the time difference exceeds this setting, no match will be attempted."
msgid "Sets the maximum time difference from a GPS track point to the image time to be matched. If the time difference exceeds this setting, no match will be attempted."
"You have enabled writing to sidecar files for metadata storage in the host application, but not for reading. This means that any metadata stored in the sidecar files will be overwritten here.\n"
"Please enable reading of sidecar files in the host application or continue at your own risk."
msgid "<p>Select the profile for your output device (usually, your printer). This profile will be used to do a soft proof, so you will be able to preview how an image will be rendered via an output device.</p>"
msgid "Cannot open the specified working space profile (\"%1\"). No color transformation will be applied. Please check the color management configuration in digiKam's setup."
msgid "With this button, you can pick the color from the original image used to set <b>Shadow Tone</b> input levels on the Red, Green, Blue, and Luminosity channels."
msgid "With this button, you can pick the color from the original image used to set <b>Middle Tone</b> input levels on the Red, Green, Blue, and Luminosity channels."
msgid "With this button, you can pick the color from the original image used to set <b>Highlight Tone</b> input levels on the Red, Green, Blue, and Luminosity channels."
"<p>This option maximizes the tonal range in the Red, Green, and Blue channels. It searches the image shadow and highlight limit values and adjusts the Red, Green, and Blue channels to a full histogram range.</p>"
"<p>This option scales brightness values across the active image so that the darkest point becomes black, and the brightest point becomes as bright as possible without altering its hue. This is often a \"magic fix\" for images that are dim or washed out.</p>"
"<p>This option adjusts the brightness of colors across the active image so that the histogram for the value channel is as nearly as possible flat, that is, so that each possible brightness value appears at about the same number of pixels as each other value. Sometimes Equalize works wonderfully at enhancing the contrasts in an image. Other times it gives garbage. It is a very powerful operation, which can either work miracles on an image or destroy it.</p>"
"<p>This option enhances the contrast and brightness of the RGB values of an image by stretching the lowest and highest values to their fullest range, adjusting everything in between.</p>"
"<p>This option enhances the contrast and brightness of the RGB values of an image to calculate optimal exposition and black level using image histogram properties.</p>"
msgid "With this button, you can pick the color of the orange mask of the scanned color negative. It represents white point of the negative, or the darkest black tone of the positive image after inversion. It is also the reference point for applying the film profile."
msgid "If you press this button, the white point is calculated from the image data automatically. This function requires to have some residual orange mask around the exposed area of the negative."
msgid "Move the slider to higher values until maximum brightness is achieved without clipping any color channel. Use the output histogram to evaluate each channel."
msgid "A percent of 0 has no effect, values above 0 represent a factor for mixing the destination color with source color this is done radially i.e. the inner part of the brush radius is totally from source and mixing with destination is done gradually till the outer part of the circle."
"<p>Select the blurring effect to apply to image.</p>"
"<p><b>Zoom Blur</b>: blurs the image along radial lines starting from a specified center point. This simulates the blur of a zooming camera.</p>"
"<p><b>Radial Blur</b>: blurs the image by rotating the pixels around the specified center point. This simulates the blur of a rotating camera.</p>"
"<p><b>Far Blur</b>: blurs the image by using far pixels. This simulates the blur of an unfocalized camera lens.</p>"
"<p><b>Motion Blur</b>: blurs the image by moving the pixels horizontally. This simulates the blur of a linear moving camera.</p>"
"<p><b>Softener Blur</b>: blurs the image softly in dark tones and hardly in light tones. This gives images a dreamy and glossy soft focus effect. It is ideal for creating romantic portraits, glamour photographs, or giving images a warm and subtle glow.</p>"
"<p><b>Shake Blur</b>: blurs the image by shaking randomly the pixels. This simulates the blur of a random moving camera.</p>"
"<p><b>Focus Blur</b>: blurs the image corners to reproduce the astigmatism distortion of a lens.</p>"
"<p><b>Smart Blur</b>: finds the edges of color in your image and blurs them without muddying the rest of the image.</p>"
"<p><b>Frost Glass</b>: blurs the image by randomly disperse light coming through a frosted glass.</p>"
"<p><b>Mosaic</b>: divides the photograph into rectangular cells and then recreates it by filling those cells with average pixel value.</p>"
"<p>Note: if you have previously selected an area in the editor, this will be unaffected by the filter. You can use this method to disable the Raindrops effect on a human face, for example.</p>"
msgid "Click on this button to draw zones marking which areas of the image are less important. These zones will be deleted when reducing the picture, or duplicated when enlarging the picture."
msgid "Use this value to give a negative bias to the seams which are not straight. May be useful to prevent distortions in some situations, or to avoid artifacts from pixel skipping (it is better to use low values in such case). This setting applies to the whole selected layer if no rigidity mask is used. Note: the bias is proportional to the difference in the transversal coordinate between each two successive points, elevated to the power of 1.5, and summed up for the whole seam."
msgid "This option lets you choose the maximum transversal step that the pixels in the seams can take. In the standard algorithm, corresponding to the default value step = 1, each pixel in a seam can be shifted by at most one pixel with respect to its neighbors. This implies that the seams can form an angle of at most 45 degrees with respect to their base line. Increasing the step value lets you overcome this limit, but may lead to the introduction of artifacts. In order to balance the situation, you can use the rigidity setting."
msgid "During the carving process, at each step the optimal seam to be carved is chosen based on the relevance value for each pixel. However, in the case where two seams are equivalent (which may happen, for instance, when large portions of the image have the same color), the algorithm always chooses the seams from one side. In some cases, this can pose problems, e.g. an object centered in the original image might not be centered in the resulting image. In order to overcome this effect, this setting allows the favored side to be switched automatically during rescaling, at the cost of slightly worse performance."
msgid "This is the free rotation operation preview. If you move the mouse cursor on this preview, a vertical and horizontal dashed line will be drawn to guide you in adjusting the free rotation correction. Release the left mouse button to freeze the dashed line's position."
msgid "This is the perspective transformation operation preview. You can use the mouse for dragging the corner to adjust the perspective transformation area."
"<p>Select your constrained aspect ratio for cropping. Aspect Ratio Crop tool uses a relative ratio. That means it is the same if you use centimeters or inches and it does not specify the physical size.</p>"
"<p>You can see below a correspondence list of traditional photographic paper sizes and aspect ratio crop:</p>"
"<p><b>8:5</b>: common wide-screen monitor (as 1680x1050)</p>"
"<p><b>2:1</b>, <b>3:1</b>, <b>4:1</b>: common panoramic sizes</p>"
"<p><b>16:9</b>: common tv-screen (as HDTV or Full-HD)</p>"
"<p>The paper <b>Format DIN A</b> use the ratio 1:1.414</p>"
"<p>The <b>Golden Ratio</b> is 1:1.618. A composition following this rule is considered visually harmonious but may not be suitable to print on standard photographic paper.</p>"
"<p>The <b>Current Aspect Ratio</b> takes aspect ratio from the currently opened image.</p>"
msgid "This is the shear operation preview. If you move the mouse cursor on this preview, a vertical and horizontal dashed line will be drawn to guide you in adjusting the shear correction. Release the left mouse button to freeze the dashed line's position."
msgid "If this option is enabled, the preview area will split vertically. A contiguous area of the image will be shown, with one half from the original image, the other half from the target image."
msgid "If this option is enabled, the preview area will split horizontally. A contiguous area of the image will be shown, with one half from the original image, the other half from the target image."
msgid "If this option is enabled, the preview area will split vertically. The same part of the original and the target image will be shown side by side."
msgid "If this option is enabled, the preview area will split horizontally. The same part of the original and the target image will be shown side by side."
msgid "For more information about the <b>Mounted Camera</b> driver, please read the <b>Supported Digital Still Cameras</b> section in the digiKam manual."
msgid "Set how digiKam will rename files as they are downloaded."
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:241
#, kde-format
msgid "File Renaming Options"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:247
#, kde-format
msgid "Auto-creation of Albums"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:253
#, kde-format
msgid "On the Fly Operations (JPEG only)"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:259
#, kde-format
msgid "DNG Convert Options"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:265
#, kde-format
msgid "Scripting"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:284
#, kde-format
msgctxt "@action Cancel process"
msgid "Cancel"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:291
#, kde-format
msgctxt "@action Information about camera"
msgid "Information"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:298
#, kde-format
msgctxt "@action Capture photo from camera"
msgid "Capture"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:310
#, kde-format
msgctxt "@action:inmenu"
msgid "Select All"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:318
#, kde-format
msgctxt "@action:inmenu"
msgid "Select None"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:326
#, kde-format
msgctxt "@action:inmenu"
msgid "Invert Selection"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:334
#, kde-format
msgctxt "@action:inmenu"
msgid "Select New Items"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:341
#, kde-format
msgctxt "@action:inmenu"
msgid "Select Locked Items"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:349
#, kde-format
msgctxt "@title:menu"
msgid "Download"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:354
#, kde-format
msgctxt "@action"
msgid "Download New"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:361
#, kde-format
msgctxt "@action"
msgid "Download Selected"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:368
#, kde-format
msgctxt "@action"
msgid "Download All"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:376
#, kde-format
msgctxt "@action"
msgid "Download && Delete New"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:384
#, kde-format
msgctxt "@action"
msgid "Download && Delete Selected"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:392
#, kde-format
msgctxt "@action"
msgid "Download && Delete All"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:399
#, kde-format
msgctxt "@action"
msgid "Upload..."
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:407
#, kde-format
msgctxt "@action"
msgid "Toggle Lock"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:415
#, kde-format
msgctxt "@action"
msgid "Mark as downloaded"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:422
#, kde-format
msgctxt "@title:menu"
msgid "Delete"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:427
#, kde-format
msgctxt "@action"
msgid "Delete Selected"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:435
#, kde-format
msgctxt "@action"
msgid "Delete All"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:441
#, kde-format
msgctxt "@action"
msgid "Delete New"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:449
#, kde-format
msgctxt "@title:group"
msgid "Views"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:460
#, kde-format
msgctxt "@action View the selected image"
msgid "Preview Item"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:480
#, kde-format
msgctxt "@title:menu"
msgid "&Sort Items"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:481
#, kde-format
msgctxt "@info:whatsthis"
msgid "The value by which the items are sorted in the thumbnail view"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:487
#, kde-format
msgctxt "item:inmenu Sort by"
msgid "By Name"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:488
#, kde-format
msgctxt "item:inmenu Sort by"
msgid "By Path"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:489
#, kde-format
msgctxt "item:inmenu Sort by"
msgid "By Date"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:490
#, kde-format
msgctxt "item:inmenu Sort by"
msgid "By Size"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:491
#, kde-format
msgctxt "item:inmenu Sort by"
msgid "By Rating"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:492
#, kde-format
msgctxt "item:inmenu Sort by"
msgid "By Download State"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:512
#, kde-format
msgctxt "@title:inmenu"
msgid "Item Sorting &Order"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:513
#, kde-format
msgctxt "@info:whatsthis"
msgid "Defines whether items are sorted in ascending or descending manner."
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:518
#, kde-format
msgctxt "@item:inmenu Sorting Order"
msgid "Ascending"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:519
#, kde-format
msgctxt "@item:inmenu Sorting Order"
msgid "Descending"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:531
#, kde-format
msgctxt "@title:menu"
msgid "&Group Items"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:532
#, kde-format
msgctxt "@info:whatsthis"
msgid "The categories in which the items in the thumbnail view are displayed"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:538
#, kde-format
msgctxt "@item:inmenu Group Items"
msgid "Flat List"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:539
#, kde-format
msgctxt "@item:inmenu Group Items"
msgid "By Folder"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:540
#, kde-format
msgctxt "@item:inmenu Group Items"
msgid "By Format"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:541
#, kde-format
msgctxt "@item:inmenu Group Items"
msgid "By Date"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:569
#, kde-format
msgctxt "@action:inmenu"
msgid "Fit to &Window"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:574
#, kde-format
msgctxt "@action:inmenu"
msgid "Zoom to 100%"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:592
#, kde-format
msgctxt "@option:check"
msgid "Show History"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:598
#, kde-format
msgctxt "@option:check"
msgid "Show Thumbbar"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:623
#: core/utilities/import/main/importui.cpp:853
#, kde-format
msgctxt "@action"
msgid "Previous Image"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:630
#, kde-format
msgctxt "@action Connection failed, try again?"
msgid "Retry"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:842
#, kde-format
msgctxt "@action"
msgid "Exit Preview Mode"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:847
#, kde-format
msgctxt "@action"
msgid "Next Image"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:859
#, kde-format
msgctxt "@action Go to first image"
msgid "First Image"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:864
#, kde-format
msgctxt "@action Go to last image"
msgid "Last Image"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:946
#, kde-format
msgctxt "@info:status"
msgid "Canceling current operation, please wait..."
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1001
#, kde-format
msgctxt "@info"
msgid "Do you want to close the dialog and cancel the current operation?"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1011
#, kde-format
msgctxt "@info:status"
msgid "Disconnecting from camera, please wait..."
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1053
#, kde-format
msgctxt "@info:status"
msgid "Scanning for new files, please wait..."
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1092
#, kde-format
msgctxt "@info:status"
msgid "Ready"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1148
#, kde-format
msgctxt "@info"
msgid "Failed to connect to the camera. Please make sure it is connected properly and turned on."
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1238
#, kde-format
msgctxt "@title:window"
msgid "Select Image to Upload"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1272
#, kde-format
msgctxt "@info"
msgid ""
"There is not enough free space on the Camera Medium to upload pictures.\n"
"\n"
"Space require: %1\n"
"Available free space: %2"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1326
#, kde-format
msgctxt "@info"
msgid ""
"<qt>Camera Folder <resource>%1</resource> already contains the item <resource>%2</resource>.<br/>"
"Please enter a new filename (without extension):</qt>"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1330
#, kde-format
msgctxt "@title:window"
msgid "File already exists"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1396
#, kde-format
msgctxt "@info"
msgid "Your custom target album date format is not valid. Please check your settings..."
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1436
#, kde-format
msgctxt "@info"
msgid "Collection which host your default target album set to process download from camera device is not available. Please select another one from camera configuration dialog."
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1445
#, kde-format
msgctxt "@info"
msgid "Your default target album set to process download from camera device is not available. Please select another one from camera configuration dialog."
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1471
#, kde-format
msgctxt "@info"
msgid "<p>Please select the destination album from the digiKam library to import the camera pictures into.</p>"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1562
#, kde-format
msgctxt "@info Popup notification"
msgid "Images download finished, you can now detach your camera while the images will be auto-rotated"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1569
#, kde-format
msgctxt "@info Popup notification"
msgid "Images download finished"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1959
#, kde-format
msgctxt "@info"
msgid "The items listed below are locked by camera (read-only). These items will not be deleted. If you really want to delete these items, please unlock them and try again."
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1970
#, kde-format
msgctxt "@info"
msgid "About to delete this image. <b>Deleted file is unrecoverable.</b> Are you sure?"
msgid_plural "About to delete these %1 images. <b>Deleted files are unrecoverable.</b> Are you sure?"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:2021
#, kde-format
msgctxt "@title:window"
msgid "Insufficient Disk Space"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:2022
#, kde-format
msgctxt "@info"
msgid ""
"There is not enough free space on the disk of the album you selected to download and process the selected pictures from the camera.\n"
"\n"
"Estimated space required: %1\n"
"Available free space: %2\n"
"\n"
"Try Anyway?"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:2332
#: core/utilities/import/main/importui.cpp:2358
#, kde-format
msgctxt "@info:status"
msgid "No item selected (%1 item)"
msgid_plural "No item selected (%1 items)"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:2350
#, kde-format
msgctxt "@info:status Filename of first selected item of number of items"
msgid "<b>%1</b> (%2 of %3)"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:2368
#, kde-format
msgctxt "@info:status"
msgid "%2/%1 item selected"
msgid_plural "%2/%1 items selected"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:2439
#, kde-format
msgctxt "@info"
msgid "A file with the same name (<b>%1</b>) already exists in folder <resource>%2</resource>."
msgid "Enable this option to set date and time metadata tags to the right values if your camera does not set these tags correctly when pictures are taken. The values will be saved in the DateTimeDigitized and DateTimeCreated EXIF, XMP, and IPTC tags."
msgid "Enable this option to automatically convert all JPEG files to a lossless image format. <b>Note:</b> Image conversion can take a while on a slow computer."
"<p>These expressions may be used to customize date format:</p>"
"<p><b>d</b>: The day as a number without a leading zero (1 to 31)</p>"
"<p><b>dd</b>: The day as a number with a leading zero (01 to 31)</p>"
"<p><b>ddd</b>: The abbreviated localized day name (e.g. 'Mon' to 'Sun')</p>"
"<p><b>dddd</b>: The long localized day name (e.g. 'Monday' to 'Sunday').</p>"
"<p><b>M</b>: The month as a number without a leading zero (1 to 12)</p>"
"<p><b>MM</b>: The month as a number with a leading zero (01 to 12)</p>"
"<p><b>MMM</b>: The abbreviated localized month name (e.g. 'Jan' to 'Dec')</p>"
"<p><b>MMMM</b>: The long localized month name (e.g. 'January' to 'December')</p>"
"<p><b>yy</b>: The year as two digit number (eg. 00 to 99)</p>"
"<p><b>yyyy</b>: The year as four digit number (eg. 2012)</p>"
"<p>All other input characters will be treated as text. Any sequence of characters that are enclosed in singlequotes will be treated as text and not be used as an expression. Examples, if date is 20 July 1969:"
"<p>"
"<p><b>dd.MM.yyyy</b> : 20.07.1969</p>"
"<p><b>ddd MMMM d yy</b> : Sun July 20 69</p>"
"<p><b>'Photo shot on ' dddd</b> : Photo shot on Sunday</p>"
msgid "Enable this option if you want to download your pictures into automatically created file extension-based sub-albums of the destination album. This way, you can separate JPEG and RAW files as they are downloaded from your camera."
"The media server permit to share items through the local network using <a href='https://en.wikipedia.org/wiki/Digital_Living_Network_Alliance'>DLNA</a> standard and <a href='https://en.wikipedia.org/wiki/Universal_Plug_and_Play'>UPNP</a> protocol. Many kind of electronic devices can support DLNA, as tablets, cellulars, TV, etc.<br/>"
"Note: depending of the network features and the configuration, the delay to discover the server on client devices can take a while."
msgid "<b>Note: <b><a href='http://en.wikipedia.org/wiki/EXIF'>EXIF</a></b> text tags marked by (*) only support printable <b><a href='http://en.wikipedia.org/wiki/Ascii'>ASCII</a></b> characters.</b>"
msgid "Set here the date and time when the original image data was generated. For a digital still camera the date and time the picture was taken are recorded."
msgid "Set here the date and time when the image was stored as digital data. If, for example, an image was captured by a digital still camera and at the same time the file was recorded, then Original and Digitization date and time will have the same contents."
msgid "<b>Warning: EXIF <b><a href='http://en.wikipedia.org/wiki/Exchangeable_image_file_format#MakerNote_data'>Makernotes</a></b> can be unreadable if you set wrong device manufacturer/model description.</b>"
msgid "Select here the mode used by the camera to set exposure when the picture was taken. In auto-bracketing mode, the camera shoots a series of frames of the same scene at different exposure settings."
msgid "Set here the flash energy used to take the picture in BCPS units. Beam Candle Power Seconds is the measure of effective intensity of a light source when it is focused into a beam by a reflector or lens. This value is the effective intensity for a period of one second."
msgid "<b>Note: <b><a href='http://en.wikipedia.org/wiki/IPTC_Information_Interchange_Model'>IPTC</a></b> text tags only support the printable <b><a href='http://en.wikipedia.org/wiki/Ascii'>ASCII</a></b> characters and limit string sizes. Use contextual help for details.</b>"
msgid "Enter here the Informative Provider Reference. I.P.R is a name registered with the IPTC/NAA, identifying the provider that provides an indicator of the content. The default value for the I.P.R is \"IPTC\" if a standard Reference Code is used. This field is limited to 32 ASCII characters."
msgid "Enter here the Subject Reference Number. Provides a numeric code to indicate the Subject Name plus optional Subject Matter and Subject Detail Names in the language of the service. Subject Reference is a number from the range 01000000 to 17999999 and represent a language independent international reference to a Subject. A Subject is identified by its Reference Number and corresponding Names taken from a standard lists given by IPTC/NAA. If a standard reference code is used, these lists are the English language reference versions. This field is limited to 8 ASCII digit code."
msgid "Enter here the Subject Name. English language is used if you selected a standard IPTC/NAA reference code. This field is limited to 64 ASCII characters."
msgid "Enter here the Subject Matter Name. English language is used if you selected a standard IPTC/NAA reference code. This field is limited to 64 ASCII characters."
msgid "Enter here the Subject Detail Name. English language is used if you selected a standard IPTC/NAA reference code. This field is limited to 64 ASCII characters."
msgid "Enter here the Informative Provider Reference. I.P.R is a name registered with the XMP/NAA, identifying the provider that provides an indicator of the content. The default value for the I.P.R is \"XMP\" if a standard Reference Code is used."
msgid "Enter here the Subject Reference Number. Provides a numeric code to indicate the Subject Name plus optional Subject Matter and Subject Detail Names in the language of the service. Subject Reference is a number from the range 01000000 to 17999999 and represent a language independent international reference to a Subject. A Subject is identified by its Reference Number and corresponding Names taken from a standard lists given by XMP/NAA. If a standard reference code is used, these lists are the English language reference versions. This field is limited to 8 digit code."
msgid "Enter script for execution. Use $INPUT and $OUTPUT for input / output filenames (with special characters escaped). These would be substituted before shell execution."
msgid "When you choose to have the watermark repeated randomly, many times in the placement combo box, you can specify here whether the repetition, you can check this to make the watermark rotations random also [0, 90, 180, 270]"
msgid "Use this to get more control over the sparsity of watermark repetition. The higher the value the sparser the watermarks get. Use floating point values, typically between 1.0 and 3.0. It can also be less than 1.0"
msgid "If you have a photo in your set with a clock or another external time source on it, you can load it here and set the indicator to the (date and) time displayed. The difference of your internal camera clock will be determined from this setting."
msgid "Set this option to show the file modification date below the image thumbnail if it is different than camera creation date. This option is useful to identify quickly which items have been modified."
"Set this option to render icon-view with large thumbnail size, for example in case of 4K monitor is used.\n"
"By default this option is turned off and the maximum thumbnail size is limited to 256x256 pixels. When this option is enabled, thumbnail size can be extended to 512x512 pixels.\n"
"This option will store more data in thumbnail database and will use more system memory. digiKam needs to be restarted to take effect, and Rebuild Thumbnails option from Maintenance tool needs to be processed over whole collections."
msgid "This option changes the size in which thumbnails are generated. You need to restart digiKam for this option to take effect. Furthermore, you need to regenerate all already stored thumbnails via the <interface>Tools / Maintenance</interface> menu."
"<p>digiKam attempts to support all of the image formats that digital cameras produce, while being able to handle a few other important video and audio formats.</p>"
" "
"<p>You can add to the already-appreciable list of formats that digiKam handles by adding the extension of the type you want to add. Multiple extensions need to be separated by a semicolon or space.</p>"
"<p><b><u>Note:</u> changes done in this view will perform a database rescan in the background.</b></p>"
"<p>Here you can add the extensions of image files (including RAW files) to be displayed in the Album view. Just put \"xyz abc\" to display files with the xyz and abc extensions in your Album view.</p>"
"<p>You can also remove file formats that are shown by default by putting a minus sign in front of the extension: e.g. \"-gif\" would remove all GIF files from your Album view and any trace of them in your database. They would not be deleted, just not shown in digiKam.</p>"
"<p><b>Warning:</b> Removing files from the database means losing all of their tags and ratings.</p>"
"<p>Here you can add extra extensions of video files to be displayed in your Album view. Just write \"xyz abc\" to support files with the *.xyz and *.abc extensions. Clicking on these files will play them in an embedded video player.</p>"
"<p>You can also remove file formats that are supported by default by putting a minus sign in front of the extension: e.g. \"-avi\" would remove all AVI files from your Album view and any trace of them in your database. They would not be deleted, just not shown in digiKam.</p>"
"<p><b>Warning:</b> Removing files from the database means losing all of their tags and ratings.</p>"
"<p>Here you can add extra extensions of audio files to be displayed in your Album view. Just write \"xyz abc\" to support files with the *.xyz and *.abc extensions. Clicking on these files will play them in an embedded audio player.</p>"
"<p>You can also remove file formats that are supported by default by putting a minus sign in front of the extension: e.g. \"-ogg\" would remove all OGG files from your Album view and any trace of them in your database. They would not be deleted, just not shown in digiKam.</p>"
"<p><b>Warning:</b> Removing files from the database means losing all of their tags and ratings.</p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/album/setupmime.cpp:195
#, kde-format
msgid "Enter additional audio file extensions."
msgstr ""
#. +> trunk5
#: core/utilities/setup/album/setupmime.cpp:258
#, kde-format
msgid ""
"<p>You have chosen to remove the following image formats from the list of supported formats: <b>%1</b>.</p>"
"<p>These are very common formats. If you have images in your collection with these formats, they will be removed from the database and you will lose all information about them, including rating and tags.</p>"
"<p>Are you sure you want to apply your changes and lose the support for these formats?</p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/album/setupmime.cpp:311
#, kde-format
msgid ""
"<p>Files with these extensions will be recognized as images and included into the database:<br/>"
" <code>%1</code></p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/album/setupmime.cpp:321
#, kde-format
msgid ""
"<p>Files with these extensions will be recognized as video files and included into the database:<br/>"
" <code>%1</code></p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/album/setupmime.cpp:331
#, kde-format
msgid ""
"<p>Files with these extensions will be recognized as audio files and included into the database:<br/>"
" <code>%1</code></p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/camera/cameralist.cpp:278
#, kde-format
msgid "Failed to auto-detect camera; please make sure it is connected properly and is turned on. Would you like to try again?"
"<p>Set this option to load images at their full size for preview, rather than at a reduced size. As this option will make it take longer to load images, only use it if you have a fast computer.</p>"
"<p><b>Note:</b> for Raw images, a half size version of the Raw data is used instead of the embedded JPEG preview.</p>"
msgid "If this option is enabled, over- and under-exposure indicators will be displayed only when pure white and pure black color matches, as all color components match the condition in the same time. Otherwise, indicators are turned on when one of the color components matches the condition."
"<para><interface>Non-Destructive Editing and Versioning</interface> allows different versions of an image to be created, whilst always preserving the original image.</para>"
" "
"<para> All steps of the editing history are recorded and can be accessed later.</para>"
"<para>Select the file format in which edited images are saved automatically. Format-specific options, like compression settings, can be configured on the <interface>Format Options</interface> tab.</para>"
"<para>"
"<list>"
"<item><emphasis strong='true'>JPEG</emphasis>: JPEG is the most commonly used file format, but it employs lossy compression, which means that with each saving operation some image information will be irreversibly lost. JPEG offers a good compression rate, resulting in smaller files. </item>"
"<item><emphasis strong='true'>PNG</emphasis>: A widely used format employing lossless compression. The files, though, will be larger because PNG does not achieve very good compression rates.</item>"
"<item><emphasis strong='true'>TIFF</emphasis>: A commonly used format, usually uncompressed or with modest lossless compression. Resulting files will be large, but without quality loss due to compression. </item>"
"<item><emphasis strong='true'>PGF</emphasis>: This is a technically superior file format offering good compression rates with either lossy or lossless compression. But it is not yet widely used and supported, so your friends may not directly be able to open these files, and you may not be able to directly publish them on the web. </item>"
"<item><emphasis strong='true'>JPEG 2000</emphasis>: JPEG 2000 is similar to PGF. Loading or saving is slower, the compression rate is better, and the format more widely supported, though still not comparable to the tradition formats JPEG, PNG or TIFF. </item>"
"<para>First and foremost, the <emphasis>original image will never be overwritten.</emphasis> Instead, when an image is edited, a new file is created: The <interface>current version</interface>.</para>"
" "
"<para>You can also create multiple <interface>versions</interface> deriving from the same <interface>original image</interface>.</para>"
" "
"<para>In addition to these files representing a current version, digiKam can take and keep additional, <interface>intermediate snapshots</interface> during the editing process. This can be useful if you want to preserve the intermediate steps for later access, for example if some editing steps cannot be automatically reproduced.</para>"
"<para>If an image has been edited, only the <interface>current versions</interface> will be shown in the main thumbnail view. From the <interface>right sidebar</interface>, you always have access to all hidden files.</para>"
" "
"<para>With the options here, you can choose to show certain files permanently.</para>"
"<para>In addition to the pixel content, image files usually contain a variety of metadata. A lot of the parameters you can use in digiKam to manage files, such as rating or comment, can be written to the files' metadata.</para>"
" "
"<para>Storing in metadata allows one to preserve this information when moving or sending the files to different systems.</para>"
msgid "Instead of synchronizing metadata, just schedule it for synchronization.Synchronization can be done later by triggering the apply pending, or at digikam exit"
msgid "Turn on this option to write metadata into RAW TIFF/EP files. This feature requires the Exiv2 shared library, version >= 0.18.0. It is still experimental, and is disabled by default."
msgid "Turn off this option to not update file timestamps when files are changed as when you update metadata or image data. Note: disabling this option can introduce some dysfunctions with applications which use file timestamps properties to detect file modifications automatically."
msgid "Turning this option on, will force digiKam to rescan files that has been modified outside digiKam. If a file has changed it is file size or if the last modified timestamp has changed, a rescan of that file will be performed when digiKam starts."
msgid "Turning this option on, will force digiKam to delete the file metadata contained in the database before the file is rescanned. WARNING: if your metadata has been written to the database only and not to the file or sidecar, you will be able to lose inserted metadata such as tags, keywords, or geographic coordinates."
" You can change the contents, rearranging the individual pixels of the image data.<nl/>"
" Or you can set a flag that the file is to be rotated before it is shown.</para>"
" "
"<para>Select this option if you always want to set only a flag. This is less obtrusive, but requires support if the file is accessed with another software. Ensure to allow setting the flag in the metadata if you want to share your files outside digiKam.</para>"
" You can change the contents, rearranging the individual pixels of the image data.<nl/>"
" Or you can set a flag that the file is to be rotated before it is shown.</para>"
" "
"<para>Select this option if you want the file to be rotated by changing the content. This is a lossless operation for JPEG files. For other formats it is a lossy operation, which you need to enable explicitly. It is not support for RAW and other read-only formats, which will be rotated by flag only.</para>"
msgid "For some file formats which apply lossy compression, data will be lost each time the content is rotated. Check this option to allow lossy rotation. If not enabled, these files will be rotated by flag."
msgid "<b>Note: These settings affect the album view and not the image editor. The image editor always changes the image data during the rotation.</b>"
msgid "Turn on this option if you want to apply changes to rating, comments and tags made in Baloo to digiKam's metadata storage. Please note that image metadata will not be edited automatically."
"<p><a href='http://community.kde.org/Baloo'>Baloo</a> provides the basis to handle all kinds of metadata on the KDE desktop in a generic fashion. It allows you to tag, rate and comment your files in KDE applications like Dolphin.</p>"
" "
"<p>Please set here if you want to synchronize the metadata stored by digiKam desktop-wide with the Baloo Desktop Search.</p>"
"<p>Add file types to be recognised as sidecars.</p>"
"<p>digiKam (optionally) writes metadata to *.xmp sidecar files. Other programs might use different types, which can be specified below. digiKam will neither display these nor read from or write to them. But whenever a matching album item (e.g. \"image.dng\" for \"image.dng.pp3\") is renamed, moved, copied or deleted, the same operation will be done on these sidecar files.</p>"
"<p>Multiple extensions must be separated by a semicolon or a space.</p>"
msgid "<p>Here you can add extra extensions of sidecars files to be processed alongside regular items. These files will not be visible, but regarded as an extension of the main file. Just write \"xyz abc\" to support files with the *.xyz and *.abc extensions. The internally used sidecars type *.xmp is always included.</p>"
msgid "Switching off exif auto rotation will most probably show your images in a wrong orientation, so only change this option if you explicitly require this. Furthermore, you need to regenerate all already stored thumbnails via the <interface>Tools | Maintenance...</interface> menu."
msgid "Switching on this option and your metadata has been written to the database only and not to the file or sidecar, you will be able to lose inserted metadata such as tags, keywords, or geographic coordinates."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setup.cpp:142
#, kde-format
msgid "Database"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setup.cpp:143
#, kde-format
msgid ""
"<qt>Database Settings<br/>"
"<i>Customize database settings</i></qt>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setup.cpp:148
#, kde-format
msgid "Collections"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setup.cpp:149
#, kde-format
msgid ""
"<qt>Collections Settings<br/>"
"<i>Set root albums locations</i></qt>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setup.cpp:155
#, kde-format
msgid ""
"<qt>Application Views Settings<br/>"
"<i>Customize the look of the views</i></qt>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setup.cpp:160
#, kde-format
msgid "Tool-Tip"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setup.cpp:161
#, kde-format
msgid ""
"<qt>Items Tool-Tip Settings<br/>"
"<i>Customize information in item tool-tips</i></qt>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setup.cpp:172
#, kde-format
msgid "Templates"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setup.cpp:173
#, kde-format
msgid ""
"<qt>Metadata templates<br/>"
"<i>Manage your collection of metadata templates</i></qt>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setup.cpp:179
#, kde-format
msgid ""
"<qt>Image Editor Settings<br/>"
"<i>Customize the image editor settings</i></qt>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setup.cpp:185
#, kde-format
msgid ""
"<qt>Settings for Color Management<br/>"
"<i>Customize the color management settings</i></qt>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setup.cpp:191
#, kde-format
msgid ""
"<qt>Light Table Settings<br/>"
"<i>Customize tool used to compare images</i></qt>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setup.cpp:203
#, kde-format
msgid "<qt>Image Quality Sorter Settings<br/>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setup.cpp:208
#, kde-format
msgid ""
"<qt>Camera Settings<br/>"
"<i>Manage your camera devices</i></qt>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setup.cpp:223
#, kde-format
msgid ""
"<qt>Miscellaneous Settings<br/>"
"<i>Customize behavior of the other parts of digiKam</i></qt>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setup.cpp:416
#, kde-format
msgid ""
"The Exif auto-rotate thumbnails option has been changed.\n"
"Do you want to rebuild all albums' items' thumbnails now?\n"
"\n"
"Note: thumbnail processing can take a while. You can start this job later from the \"Tools-Maintenance\" menu."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupdatabase.cpp:114
#, kde-format
msgctxt "@title:tab"
msgid "Database Settings"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupdatabase.cpp:122
#, kde-format
msgid ""
"<p>Set the names of directories that you want to ignore from your photo collections. The names are case sensitive and should be separated by a semicolon.</p>"
"<p>This is for example useful when you store your photos on a Synology NAS (Network Attached Storage). In every directory the system creates a subdirectory @eaDir to store thumbnails. To avoid digiKam inserting the original photo and its corresponding thumbnail twice, @eaDir is ignored by default.</p>"
"<p>To re-include directories that are ignored by default prefix it with a minus, e.g. -@eaDir.</p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupdatabase.cpp:140
#, kde-format
msgid "Additional directories to ignore (<a href='image'>Currently ignored directories</a>):"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupdatabase.cpp:145
#, kde-format
msgid "Enter directories that you want to ignore from adding to your collections."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupdatabase.cpp:166
#, kde-format
msgctxt "@title:tab"
msgid "Ignored Directories"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupdatabase.cpp:263
#, kde-format
msgctxt "@info"
msgid ""
"<p>The process of updating the file hashes takes a few minutes.</p>"
" "
"<p>Please ensure that any important collections on removable media are connected. <i>After the upgrade you cannot use your database with a digiKam version prior to 2.0.</i></p>"
" "
"<p>Do you want to begin the update?</p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupdatabase.cpp:278
#, kde-format
msgctxt "@title:group"
msgid "Updates"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupdatabase.cpp:281
#, kde-format
msgctxt "@action:button"
msgid "Update File Hashes"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupdatabase.cpp:283
#, kde-format
msgctxt "@info:tooltip"
msgid ""
"<qt>File hashes are used to identify identical files and to display thumbnails. A new, improved algorithm to create the hash is now used. The old algorithm, though, still works quite well, so it is recommended to carry out this upgrade, but not required.<br>"
" After the upgrade you cannot use your database with a digiKam version prior to 2.0.</qt>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupdatabase.cpp:292
#, kde-format
msgctxt "@info:tooltip"
msgid "Get information about <interface>Update File Hashes</interface>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupdatabase.cpp:316
#, kde-format
msgid ""
"<p>Directories starting with a dot are ignored by default.<br/>"
" <code>%1</code></p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:186
#, kde-format
msgid "Enable Color Management"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:187
#, kde-format
msgid ""
"<ul>"
"<li>Checked: Color Management is enabled</li>"
"<li>Unchecked: Color Management is disabled</li>"
"</ul>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:194
#, kde-format
msgid "Visit Little CMS project website"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:204
#, kde-format
msgid "Working Color Space"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:210
#, kde-format
msgid "<p>This is the color space all the images will be converted to when opened (if you choose to convert) and the profile that will be embedded when saving. Good and safe choices are <b>Adobe RGB (1998)</b> and <b>sRGB IEC61966-2.1</b>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:216
#, kde-format
msgid "<p>You can use this button to get more detailed information about the selected workspace profile.</p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:230
#, kde-format
msgid "When the profile of an image does not match the working color space"
msgid "<p>If an image has an embedded color profile not matching the working space profile, digiKam will ask if you want to convert to the working space, keep the embedded profile or discard the embedded profile and assign a different one.</p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:245
#, kde-format
msgid "Convert the image to the working color space"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:246
#, kde-format
msgid "<p>If an image has an embedded color profile not matching the working space profile, digiKam will convert the image's color information to the working color space. This changes the pixel data, but not the appearance of the image.</p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:262
#, kde-format
msgid "When an image has no color profile information"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:270
#, kde-format
msgid "<p>If an image has no embedded color profile, digiKam will ask which color space shall be used to interpret the image and to which color space it shall be transformed for editing.</p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:274
#, kde-format
msgid "Assume it is using the sRGB color space (Internet standard)"
msgstr ""
#. i18n("<p></p>"));
#.
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:279
#, kde-format
msgid "and convert it to the working color space"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:291
#, kde-format
msgid "Assume it is using the working color space"
msgstr ""
#. i18n("<p></p>"));
#.
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:296
#, kde-format
msgid "Convert it from default input color space to working space"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:314
#, kde-format
msgid "When loading a RAW file with uncalibrated colors"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:321
#, kde-format
msgid "Ask for the input profile"
msgstr ""
#. i18n("<p></p>"));
#.
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:326
#, kde-format
msgid "Automatic color correction"
msgstr ""
#. i18n("<p></p>"));
#.
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:331
#, kde-format
msgid "Convert it from the default input profile"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:355
#, kde-format
msgid "Color Managed View"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:360
#, kde-format
msgid "Monitor profile:"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:364
#, kde-format
msgid "<p>Select the color profile for your monitor here.</p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:368
#, kde-format
msgid "<p>You can use this button to get more detailed information about the selected monitor profile.</p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:372
#, kde-format
msgid "Use color managed view in editor"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:373
#, kde-format
msgid "<p>Turn on this option if you want to use your <b>Monitor Color Profile</b> to show your pictures in the Image Editor window with a color correction adapted to your monitor. You can at any time toggle this option from the Editor window. <i>Warning</i>: This can slow down rendering of the image, depending on the speed of your computer.</p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:380
#, kde-format
msgid "Use color managed view for previews and thumbnails"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:395
#, kde-format
msgid "Camera and Scanner"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:400
#, kde-format
msgid "Default input color profile:"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:402
#, kde-format
msgid "<p>This is the default color profile for your input device (that is your camera - or your scanner). A camera input profile is recommended for correct conversion of RAW images in 16bit. Some of the options about loading behavior above refer to this profile.</p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:409
#, kde-format
msgid "<p>You can use this button to get more detailed information about the selected input profile.</p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:420
#, kde-format
msgid "Printing and Proofing"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:425
#, kde-format
msgid "Output device profile:"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:434
#, kde-format
msgid "<p>You can use this button to get more detailed information about the selected proofing profile.</p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:445
#, kde-format
msgid "Color Profiles Repository"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:450
#, kde-format
msgid "digiKam looks for ICC profiles in a number of <a href='default'>default locations</a>. You can specify an additional folder:"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:458
#, kde-format
msgid "<p>digiKam searches ICC profiles in default system folders and ships itself a few selected profiles. Store all your additional color profiles in the directory set here.</p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:481
#, kde-format
msgid "Use black point compensation"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:482
#, kde-format
msgid "<p><b>Black Point Compensation</b> is a way to make adjustments between the maximum black levels of digital files and the black capabilities of various digital devices.</p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:488
#, kde-format
msgid "Rendering Intents:"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:504
#, kde-format
msgid "Profiles"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:698
#, kde-format
msgid "Monitor Profile From System Settings"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:730
#, kde-format
msgid "No ICC profiles files found."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:745
#, kde-format
msgid "No Display Profile Available"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:747
#, kde-format
msgid "No Output Profile Available"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:877
#, kde-format
msgctxt "none of the paths"
msgid "none"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:886
#, kde-format
msgid ""
"On Windows, the default search paths include "
"<ul>"
"<li>%1/Windows/Spool/Drivers/Color/</li>"
"<li>%2/Windows/Color/</li>"
"</ul>"
"On your system, currently these paths exist and are scanned:"
"<ul>"
"<li>%3</li>"
"</ul>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:900
#, kde-format
msgid ""
"On Mac OS X, the default search paths include "
"<ul>"
"<li>/System/Library/ColorSync/Profiles</li>"
"<li>/Library/ColorSync/Profiles</li>"
"<li>~/Library/ColorSync/Profiles</li>"
"<li>/opt/local/share/color/icc</li>"
"<li>/opt/digikam/share/color/icc</li>"
"<li>~/.local/share/color/icc/</li>"
"<li>~/.local/share/icc/</li>"
"<li>~/.color/icc/</li>"
"</ul>"
"On your system, currently these paths exist and are scanned:"
"<ul>"
"<li>%1</li>"
"</ul>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:917
#, kde-format
msgid ""
"On Linux, the default search paths include "
"<ul>"
"<li>/usr/share/color/icc</li>"
"<li>/usr/local/share/color/icc</li>"
"<li>~/.local/share/color/icc/</li>"
"<li>~/.local/share/icc/</li>"
"<li>~/.color/icc/</li>"
"</ul>"
"On your system, currently these paths exist and are scanned:"
msgid "Set this option to automatically synchronize zooming and panning between left and right panels if the images have the same size."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuplighttable.cpp:103
#, kde-format
msgid "Selecting a thumbbar item loads the image to the right panel"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuplighttable.cpp:105
#, kde-format
msgid "Set this option to automatically load an image into the right panel when the corresponding item is selected on the thumbbar."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuplighttable.cpp:108
#, kde-format
msgid "Clear the light table on close"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuplighttable.cpp:109
#, kde-format
msgid "Set this option to remove all images from the light table when you close it, or unset it to preserve the images currently on the light table."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:136
#, kde-format
msgid "String comparison type:"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:138
#, kde-format
msgctxt "method to compare strings"
msgid "Natural"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:139
#, kde-format
msgctxt "method to compare strings"
msgid "Normal"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:140
#, kde-format
msgid ""
"<qt>Sets the way in which strings are compared inside digiKam. This eg. influences the sorting of the tree views.<br/>"
"<b>Natural</b> tries to compare strings in a way that regards some normal conventions and will eg. result in sorting numbers naturally even if they have a different number of digits.<br/>"
"<b>Normal</b> uses a more technical approach. Use this style if you eg. want to entitle albums with ISO dates (201006 or 20090523) and the albums should be sorted according to these dates.</qt>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:150
#, kde-format
msgid "Confirm when moving items to the &trash"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:151
#, kde-format
msgid "Confirm when permanently deleting items"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:152
#, kde-format
msgid "Do not confirm when applying changes in the &right sidebar"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:153
#, kde-format
msgid "&Scan for new items at startup (makes startup slower)"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:154
#, kde-format
msgid ""
"Set this option to force digiKam to scan all collections for new items to\n"
"register new elements in database. The scan is performed in the background through\n"
"the progress manager available in the statusbar\n"
" when digiKam main interface\n"
"is loaded. If your computer is fast enough, this will have no effect on usability\n"
"of digiKam while scanning. If your collections are huge or if you use a remote database,\n"
"this can introduce low latency, and it is recommended to disable this option and to plan\n"
"a manual scan through the maintenance tool at the right moment."
"Set this option to force digiKam to clean up the core database from obsolete item entries.\n"
"Entries are only deleted if the connected image/video/audio file was already removed, i.e.\n"
"the database object wastes space.\n"
"This option does not clean up other databases as the thumbnails or recognition db.\n"
"For clean up routines for other databases, please use the maintenance."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:171
#, kde-format
msgid "Show only face tags for assigning names in people sidebar"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:176
#, kde-format
msgid "Lower bound for minimum similarity:"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:182
#, kde-format
msgid "Select here the lower bound of the minimum similarity threshold for fuzzy and duplicates searches. The default value is 40. Selecting a lower value than 40 can make the search <b>really</b> slow."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:213
#, kde-format
msgid "Draw frames around grouped items"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:220
#, kde-format
msgid "Set this option to configure how sidebar tab titles are visible. Use \"Only For Active Tab\" option if you use a small screen resolution as with a laptop computer."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:294
#, kde-format
msgid "Perform the following operations on all group members:"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:295
#, kde-format
msgid ""
"When images are grouped the following operations<br/>"
"are performed only on the displayed item (No)<br/>"
"or on all the hidden items in the group as well (Yes).<br/>"
"If Ask is selected, there will be a prompt every<br/>"
"time this operation is executed."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:303
#, kde-format
msgid "Ask"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:348
#, kde-format
msgctxt "@title:tab"
msgid "Grouping"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:106
#, kde-format
msgid "Delay between images:"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:114
#, kde-format
msgid "The delay, in seconds, between images."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:117
#, kde-format
msgid "Start with current image"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:118
#, kde-format
msgid "If this option is enabled, the Slideshow will be started with the current image selected in the images list."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:121
#, kde-format
msgid "Slideshow runs in a loop"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:122
#, kde-format
msgid "Run the slideshow in a loop."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:124
#, kde-format
msgid "Show progress indicator"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:125
#, kde-format
msgid "Show a progress indicator with pending items to show and time progression."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:127
#, kde-format
msgid "Show image file name"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:128
#, kde-format
msgid "Show the image file name at the bottom of the screen."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:130
#, kde-format
msgid "Show image creation date"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:131
#, kde-format
msgid "Show the image creation time/date at the bottom of the screen."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:134
#, kde-format
msgid "Show the camera aperture and focal length at the bottom of the screen."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:137
#, kde-format
msgid "Show the camera exposure and sensitivity at the bottom of the screen."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:140
#, kde-format
msgid "Show the camera make and model at the bottom of the screen."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:142
#, kde-format
msgid "Show image caption"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:143
#, kde-format
msgid "Show the image caption at the bottom of the screen."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:145
#, kde-format
msgid "Show image title"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:146
#, kde-format
msgid "Show the image title at the bottom of the screen."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:148
#, kde-format
msgid "Show image caption if it has not title"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:149
#, kde-format
msgid "Show the image caption at the bottom of the screen if no titles existed."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:151
#, kde-format
msgid "Show image tags"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:152
#, kde-format
msgid "Show the digiKam image tag names at the bottom of the screen."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:154
#, kde-format
msgid "Show image labels"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:155
#, kde-format
msgid "Show the digiKam image color label, pick label, and rating at the bottom of the screen."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:158
#, kde-format
msgid "Screen placement:"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:160
#, kde-format
msgid "In case of multi-screen computer, select here the monitor to slide contents."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:163
#, kde-format
msgctxt "@label:listbox The current screen, for the presentation mode"
msgid "Current Screen"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:164
#, kde-format
msgctxt "@label:listbox The default screen for the presentation mode"
msgid "Default Screen"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:168
#, kde-format
msgctxt "@label:listbox %1 is the screen number (0, 1, ...)"
msgid "Screen %1"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptemplate.cpp:92
#, kde-format
msgid "Template Title:"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptemplate.cpp:95
#, kde-format
msgid "Enter the metadata template title here."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptemplate.cpp:96
#, kde-format
msgid "<p>Enter the metadata template title here. This title will be used to identify a template in your collection.</p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptemplate.cpp:106
#, kde-format
msgid "<b>Note: These information are used to set <b><a href='http://en.wikipedia.org/wiki/Extensible_Metadata_Platform'>XMP</a></b> and <b><a href='http://en.wikipedia.org/wiki/IPTC'>IPTC</a></b> tag contents. There is no limitation with XMP, but note that IPTC text tags only support the printable <b><a href='http://en.wikipedia.org/wiki/Ascii'>ASCII</a></b> character set, and tag sizes are limited. Use contextual help for details.</b>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptemplate.cpp:127
#, kde-format
msgid "&Replace..."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptemplate.cpp:244
#: core/utilities/setup/setuptemplate.cpp:273
#, kde-format
msgid "Cannot register new metadata template without title."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptemplate.cpp:250
#, kde-format
msgid "A metadata template named '%1' already exists."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:195
#, kde-format
msgid "Tool-Tips Font:"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:196
#, kde-format
msgid "Select here the font used to display text in tool-tips."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:204
#, kde-format
msgid "Show icon-view and thumb-bar items' tool-tips"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:205
#, kde-format
msgid "Set this option to display image information when the mouse hovers over an icon-view or thumb-bar item."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:208
#, kde-format
msgid "File/Item Information"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:211
#, kde-format
msgid "File name"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:214
#, kde-format
msgid "File date"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:217
#, kde-format
msgid "File size"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:220
#, kde-format
msgid "Image type"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:223
#, kde-format
msgid "Image dimensions"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:226
#, kde-format
msgid "Image aspect ratio"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:227
#, kde-format
msgid "Set this option to display the image aspect ratio."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:243
#: core/utilities/setup/setuptooltip.cpp:423
#, kde-format
msgid "Camera make and model"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:251
#, kde-format
msgid "Camera date"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:254
#: core/utilities/setup/setuptooltip.cpp:431
#, kde-format
msgid "Camera aperture and focal length"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:258
#: core/utilities/setup/setuptooltip.cpp:435
#, kde-format
msgid "Camera exposure and sensitivity"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:262
#, kde-format
msgid "Camera mode and program"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:266
#: core/utilities/setup/setuptooltip.cpp:439
#, kde-format
msgid "Camera flash settings"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:270
#: core/utilities/setup/setuptooltip.cpp:443
#, kde-format
msgid "Camera white balance settings"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:287
#, kde-format
msgid "digiKam Information"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:290
#: core/utilities/setup/setuptooltip.cpp:363
#, kde-format
msgid "Album name"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:291
#: core/utilities/setup/setuptooltip.cpp:364
#, kde-format
msgid "Set this option to display the album name."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:293
#, kde-format
msgid "Image title"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:294
#, kde-format
msgid "Set this option to display the image title."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:296
#, kde-format
msgid "Image caption"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:297
#, kde-format
msgid "Set this option to display the image captions."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:299
#, kde-format
msgid "Image tags"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:300
#, kde-format
msgid "Set this option to display the image tags."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:302
#, kde-format
msgid "Image labels"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:303
#, kde-format
msgid "Set this option to display the image pick, color, rating labels."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:315
#, kde-format
msgid "Audio/Video Information"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:318
#, kde-format
msgid "Video Aspect Ratio"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:319
#: core/utilities/setup/setuptooltip.cpp:334
#, kde-format
msgid "Set this option to display the Aspect Ratio of the Video."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:322
#, kde-format
msgid "Set this option to display the Audio Bit Rate of the Video."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:325
#, kde-format
msgid "Set this option to display the Audio Channel Type of the Video."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:328
#, kde-format
msgid "Set this option to display the Audio Codec of the Video."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:330
#, kde-format
msgid "Video Duration"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:331
#, kde-format
msgid "Set this option to display the Duration of the Video."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:333
#, kde-format
msgid "Video Frame Rate"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:337
#, kde-format
msgid "Set this option to display the Codec of the Video."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:357
#, kde-format
msgid "Show album items' tool-tips"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:358
#, kde-format
msgid "Album Information"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:360
#: core/utilities/setup/setuptooltip.cpp:401
#, kde-format
msgid "Set this option to display album information when the mouse hovers over a folder-view item."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:366
#, kde-format
msgid "Album date"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:367
#, kde-format
msgid "Set this option to display the album date."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:369
#, kde-format
msgid "Album collection"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:370
#, kde-format
msgid "Set this option to display the album collection."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:372
#, kde-format
msgid "Album category"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:373
#, kde-format
msgid "Set this option to display the album category."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:375
#, kde-format
msgid "Album caption"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:376
#, kde-format
msgid "Set this option to display the album caption."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:378
#, kde-format
msgid "Album preview"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:379
#, kde-format
msgid "Set this option to display the album preview."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:398
#, kde-format
msgid "Show import items' tool-tips"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:399
#, kde-format
msgid "Import Information"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:404
#, kde-format
msgid "Item name"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:405
#, kde-format
msgid "Set this option to display the item name."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:407
#, kde-format
msgid "Item date"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:408
#, kde-format
msgid "Set this option to display the item date."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:410
#, kde-format
msgid "Item size"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:411
#, kde-format
msgid "Set this option to display the item size."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:413
#, kde-format
msgid "Item type"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:414
#, kde-format
msgid "Set this option to display the item type."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:416
#, kde-format
msgid "Item dimensions"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:417
#, kde-format
msgid "Set this option to display the item dimensions."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:420
#, kde-format
msgid "Note: these settings require \"Use File Metadata\" option from Camera Setup Behavior page."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:470
#, kde-format
msgid "Icon Items"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:471
#, kde-format
msgid "Album Items"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:472
#, kde-format
msgid "Import Items"
msgstr ""
#. +> trunk5
#: core/utilities/slideshow/slideend.cpp:77
#, kde-format
msgid ""
"Slideshow Completed.\n"
"Click To Exit\n"
"or press ESC..."
msgstr ""
#. +> trunk5
#: core/utilities/slideshow/slideerror.cpp:88
#, kde-format
msgid ""
"An error has occurred to show item\n"
"%1"
msgstr ""
#. +> trunk5
#: core/utilities/slideshow/slidehelp.cpp:43
#, kde-format
msgid "Slideshow Usage"
msgstr ""
#. +> trunk5
#: core/utilities/slideshow/slidehelp.cpp:51
#, kde-format
msgid ""
"<qt>"
"<table>"
"<tr>"
"<td colspan=\"2\"><nobr>"
"<center><b>"
"<h1>Item Access</h1>"
"</b></center>"
"</nobr></td>"
"</tr>"
"<tr>"
"<td>Previous Item:</td>"
"<td><i>Up</i> key</td>"
"</tr>"
"<tr>"
"<td></td>"
"<td><i>PgUp</i> key</td>"
"<tr>"
"<td></td>"
"<td><i>Left</i> key</td>"
"<tr>"
"<td></td>"
"<td>Mouse wheel up</td>"
"<tr>"
"<td></td>"
"<td>Left mouse button</td>"
"<tr>"
"<td>Next Item:</td>"
"<td><i>Down</i> key</td>"
"</tr>"
"<tr>"
"<td></td>"
"<td><i>PgDown</i> key</td>"
"<tr>"
"<td></td>"
"<td><i>Right</i> key</td>"
"<tr>"
"<td></td>"
"<td>Mouse wheel down</td>"
"<tr>"
"<td></td>"
"<td>Right mouse button</td>"
"<tr>"
"<td>Pause/Start:</td>"
"<td><i>Space</i> key</td>"
"</tr>"
"<tr>"
"<td>Quit:</td>"
"<td><i>Esc</i> key"
"<td></tr>"
"<tr>"
"<td colspan=\"2\"><nobr>"
"<center><b>"
"<h1>Item Properties</h1>"
"</b></center>"
"</nobr></td>"
"</tr>"
"<tr>"
"<td>Change Tags:</td>"
"<td>Use Tags keyboard shortcuts</td>"
"</tr>"
"<tr>"
"<td>Change Rating:</td>"
"<td>Use Rating keyboard shortcuts</td>"
"</tr>"
"<tr>"
"<td>Change Color Label:</td>"
"<td>Use Color label keyboard shortcuts</td>"
"</tr>"
"<tr>"
"<td>Change Pick Label:</td>"
"<td>Use Pick label keyboard shortcuts</td>"
"</tr>"
"<tr>"
"<td colspan=\"2\"><nobr>"
"<center><b>"
"<h1>Others</h1>"
"</b></center>"
"</nobr></td>"
"</tr>"
"<tr>"
"<td>Show this help:</td>"
"<td><i>F1</i> key</td>"
"</tr>"
"</table>"
"</qt>"
msgstr ""
#. +> trunk5
#: core/utilities/slideshow/slideshow.cpp:514
#, kde-format
msgctxt "Reason for inhibiting the screensaver activation, when the presentation mode is active"
"You are running an unsupported version of Windows: %1.\n"
"This is not recommended. Do not report any bugs.\n"
"Please update to a supported version of Windows: Windows 7, 8, 8.1 or 10."
msgstr ""
#. +> trunk5 stable5
#: krita/main.cc:393 krita/main.cc:398
#, kde-format
msgid "Krita Tablet Support"
msgstr ""
#. +> trunk5 stable5
#: krita/main.cc:394
#, kde-format
msgid "Cannot load WinTab driver and no Windows Ink pen devices are found. If you have a drawing tablet, please make sure the tablet driver is properly installed."
msgstr ""
#. +> trunk5 stable5
#: krita/main.cc:399
#, kde-format
msgid "Cannot load WinTab driver. If you have a drawing tablet, please make sure the tablet driver is properly installed."
msgid "Adds pixels using the color of surrounding pixels. Produces smoother tonal gradations than Bilinear."
msgstr ""
#. +> trunk5 stable5
#: libs/image/kis_filter_strategy.h:96
#, kde-format
msgid "Nearest Neighbor"
msgstr ""
#. +> trunk5 stable5
#: libs/image/kis_filter_strategy.h:102
#, kde-format
msgid "Replicate pixels in the image. Preserves all the original detail, but can produce jagged effects."
msgstr ""
#. +> trunk5 stable5
#: libs/image/kis_filter_strategy.h:115
#: libs/ui/canvas/kis_canvas_controller.cpp:314
#, kde-format
msgid "Bilinear"
msgstr ""
#. +> trunk5 stable5
#: libs/image/kis_filter_strategy.h:121
#, kde-format
msgid "Adds pixels averaging the color values of surrounding pixels. Produces medium quality results when the image is scaled from half to two times the original size."
msgstr ""
#. +> trunk5 stable5
#: libs/image/kis_filter_strategy.h:131
#, kde-format
msgid "Bell"
msgstr ""
#. +> trunk5 stable5
#: libs/image/kis_filter_strategy.h:142
#, kde-format
msgid "BSpline"
msgstr ""
#. +> trunk5 stable5
#: libs/image/kis_filter_strategy.h:153
#, kde-format
msgid "Lanczos3"
msgstr ""
#. +> trunk5 stable5
#: libs/image/kis_filter_strategy.h:159
#, kde-format
msgid "Offers similar results than Bicubic, but maybe a little bit sharper. Can produce light and dark halos along strong edges."
msgid "This merge strategy attempts to find the best solution for merging, for instance by merging the list of authors together, or keeping identical photographic information."
msgid "This image is larger than <b>%1 x %2</b>. Images this size cannot be saved to this format."
msgstr ""
#. +> trunk5 stable5
#: libs/impex/ColorModelCheck.h:44
#, kde-format
msgctxt "image conversion warning"
msgid "The color model <b>%1</b> or channel depth <b>%2</b> cannot be saved to this format. Your image will be converted."
msgstr ""
#. +> trunk5 stable5
#: libs/impex/ColorModelHomogenousCheck.h:125
#, kde-format
msgctxt "image conversion warning"
msgid "Your image contains layers with a color model that is different from the image. The layers will be converted."
msgstr ""
#. +> trunk5 stable5
#: libs/impex/ColorModelPerLayerCheck.h:129
#, kde-format
msgctxt "image conversion warning"
msgid "Your image contains layers with the color model <b>%1</b> and channel depth <b>%2</b> which cannot be saved to this format. The layers will be converted."
msgstr ""
#. +> trunk5 stable5
#: libs/impex/CompositionsCheck.h:36
#, kde-format
msgctxt "image conversion warning"
msgid "The image contains <b>compositions</b>. The compositions will not be saved."
msgstr ""
#. +> trunk5 stable5
#: libs/impex/ExifCheck.h:40
#, kde-format
msgctxt "image conversion warning"
msgid "The image contains <b>Exif</b> metadata. The metadata will not be saved."
"<p><i>Thanks! You were all <b>awesome</b>!</i></p>"
"</body></html>"
msgstr ""
#. +> trunk5 stable5
#: libs/ui/dialogs/kis_about_application.cpp:101
#, kde-format
msgid "Backers"
msgstr ""
#. +> trunk5 stable5
#: libs/ui/dialogs/kis_about_application.cpp:107
#, kde-format
msgid ""
"<html><head/><body>"
"<h1 align=\"center\">Thanks To</h1>"
"<p>"
msgstr ""
#. +> trunk5 stable5
#: libs/ui/dialogs/kis_about_application.cpp:126
#, kde-format
msgid ""
".</p>"
"<p><i>For supporting Krita development with advice, icons, brush sets and more.</i></p>"
"</body></html>"
msgstr ""
#. +> trunk5 stable5
#: libs/ui/dialogs/kis_about_application.cpp:129
#, kde-format
msgid "Also Thanks To"
msgstr ""
#. +> trunk5 stable5
#: libs/ui/dialogs/kis_about_application.cpp:133
#, kde-format
msgid ""
"<html><head/><body>"
"<h1 align=\"center\"><b>Your Rights</b></h1>"
"<p>Krita is released under the GNU General Public License (version 3 or any later version).</p>"
"<p>This license grants people a number of freedoms:</p>"
"<ul>"
"<li>You are free to use Krita, for any purpose</li>"
"<li>You are free to distribute Krita</li>"
"<li>You can study how Krita works and change it</li>"
"<li>You can distribute changed versions of Krita</li>"
"</ul>"
"<p>The Krita Foundation and its projects on krita.org are <b>committed</b> to preserving Krita as free software.</p>"
"<h1 align=\"center\">Your artwork</h1>"
"<p>What you create with Krita is your sole property. All your artwork is free for you to use as you like.</p>"
"<p>That means that Krita can be used commercially, for any purpose. There are no restrictions whatsoever.</p>"
"<p>Krita’s GNU GPL license guarantees you this freedom. Nobody is ever permitted to take it away, in contrast to trial or educational versions of commercial software that will forbid your work in commercial situations.</p>"
"<br/>"
"<hr/>"
"<pre>"
msgstr ""
#. +> trunk5 stable5
#: libs/ui/dialogs/kis_about_application.cpp:161
#, kde-format
msgid "License"
msgstr ""
#. +> trunk5 stable5
#: libs/ui/dialogs/kis_about_application.cpp:169
#, kde-format
msgid ""
"<html><head/><body>"
"<h1 align=\"center\"><b>Third-party Libraries used by Krita</b></h1>"
"<p>Krita is built on the following free software libraries:</p>"
msgid "The image data you want to paste does not have an ICM profile associated with it. If you do not select a profile, Krita will assume that the image data is encoded in the import profile defined in the Settings dialog."
msgid "Hue hopefully maintained (but not required), lightness and saturation sacrificed to maintain the perceived color. White point changed to result in neutral grays. Intended for images."
msgid "Hue and saturation maintained with lightness sacrificed to maintain saturation. White point changed to result in neutral grays. Intended for business graphics (make it colorful charts, graphs, overheads, ...)"
msgid "Within the destination device gamut; hue, lightness and saturation are maintained. Outside the gamut; hue and lightness are maintained, saturation is sacrificed. White point for source and destination; unchanged. Intended for spot colors (Pantone, TruMatch, logo colors, ...)"
"<p><a href=\"https://en.wikipedia.org/wiki/Color_space\"><span style=\" font-weight:600; text-decoration: underline; color:#006e28;\">Color Spaces</span></a> determine how colors are encoded in your files. Different color spaces have different properties and are used for different purposes.</p>"
"<p>Try to disable vsync for Krita. This makes painting more responsive. Uncheck only when experiencing crashes with some GPU/driver combinations.</p>"
"<p><span style=\" font-weight:600;\">Note:</span> This changes only the colorspace of the rendered image. To convert the colorspace of the layers, use Convert Image Colorspace.</p>"
"<p>Set how much you wish to correct the adaptation state. This will affect how <span style=\" font-style:italic;\">Absolute Colorimetric</span> changes the whites of your image. In Layman's terms: how much do you wish to have the color management correct the paper-color to screen white while using <span style=\" font-style:italic;\">Absolute Colorimetric</span>?</p>"
"<p>Black Point compensation matches the darkest color of the source device to the darkest color of the destination device. Relative Colorimetric without Black Point Compensation will show the difference between the darkest values. With blackpoint compensation, black is black.</p>"
"<p>When rendering animation frames (into files or during animation cache regeneration), Krita will make the specified number of copies of your image and will work on them in parallel. Each copy will demand more RAM for its storage (about 20% of the size of you image), so raise this limit only if you have enough RAM installed.</p>"
"<p><br/>"
"</p>"
"<p><span style=\" font-weight:600;\">Recommended value:</span> set Clones Limit to the number of <span style=\" text-decoration: underline;\">physical</span> (non-hyperthreaded) cores your CPU has</p>"
"<p>Krita will try to limit the number of screen updates per second to the given number. A lower number will decrease visual responsiveness but increase stylus precision on some systems like macOS."
"<p>When performance logging is enabled Krita saves timing information into the '<working_dir>/log' folder. If you experience performance problems and want to help us, enable this option and add the contents of the directory to a bug report.</p>"
"<p>Animation frame cache will be stored in RAM completely without any limitations</p>"
"<p><span style=\" font-weight:600;\">WARNING:</span> please make sure your computer has enough RAM <span style=\" text-decoration: underline;\">above</span> the amount you requested in General tab. Otherwise you might face system freezes.</p>"
"<p>* for 1 second of FullHD@25fps video you need extra 200 MiB of memory</p>"
"<p>* for 1 second of 4K UltraHD@25fps video you need extra 800 MiB of memory</p>"
"<p>Animation frames are stored on hard disk in the same folder as swap file. The cache is stored in a compressed way. Little amount of extra RAM is needed.</p>"
"<p>Since data transfer speed of the hard drive is low, you might want to limit cached frame size to be able to play your video at 25 fps. The limit of 2500 px is usually a good choice.</p>"
"<p>Render scaled down version of the frame if the image is bigger than the provided limit. Make sure you enable this option when using on-disk storage backend.</p>"
"<p>Choose the optional emblem icon that indicates extra information, such as the preset being a special effects brush, or just using tilt, or angled in some way.</p>"
msgid "The <i>Alternate Invocation</i> action performs an alternate action with the current tool. For example, using the brush tool it picks a color from the canvas."
"<p>The driver for your drawing tablet and Windows do not agree on the size of the screen your tablet is connected to. Please select the right option.</p>"
"You enabled OpenColorIO based color management, but your image is not an RGB image.\n"
"OpenColorIO-based color management only works with RGB images.\n"
"Please check the settings in the LUT docker.\n"
"OpenColorIO will now be deactivated."
msgstr ""
#. +> trunk5 stable5
#: libs/ui/opengl/kis_opengl_win.cpp:115
#, kde-format
msgid "The Intel graphics driver in use is known to have issues with OpenGL."
msgstr ""
#. +> trunk5 stable5
#: libs/ui/opengl/kis_opengl_win.cpp:117
#, kde-format
msgid "Intel graphics drivers tend to have issues with OpenGL so ANGLE will be used by default. You may manually switch to OpenGL but it is not guaranteed to work properly."
msgstr ""
#. +> trunk5 stable5
#: libs/ui/opengl/kis_opengl_win.cpp:239
#, kde-format
msgid "The graphics driver in use does not meet the OpenGL requirements."
msgstr ""
#. +> trunk5 stable5
#: libs/ui/opengl/kis_opengl_win.cpp:241
#, kde-format
msgid "The graphics driver in use may not work well with OpenGL."
msgstr ""
#. +> trunk5 stable5
#: libs/ui/opengl/kis_opengl_win.cpp:253
#, kde-format
msgid "ANGLE is using a software Direct3D renderer, which is not hardware-accelerated and may be very slow. This can happen if the graphics drivers are not properly installed, or when using a Remote Desktop session."
msgstr ""
#. +> trunk5 stable5
#: libs/ui/tool/kis_selection_tool_helper.cpp:151
#, kde-format
msgid "Shape selection does not fully support wraparound mode. Please use pixel selection instead"
msgstr ""
#. +> trunk5 stable5
#: libs/ui/tool/kis_tool.cc:558
#, kde-format
msgid "No options"
msgstr ""
#. +> trunk5 stable5
#: libs/ui/tool/kis_tool.cc:673
#, kde-format
msgid "Layer is locked and invisible."
msgstr ""
#. +> trunk5 stable5
#: libs/ui/tool/kis_tool.cc:675
#, kde-format
msgid "Layer is locked."
msgstr ""
#. +> trunk5 stable5
#: libs/ui/tool/kis_tool.cc:677
#, kde-format
msgid "Layer is invisible."
msgstr ""
#. +> trunk5 stable5
#: libs/ui/tool/kis_tool.cc:679
#, kde-format
msgid "Layer can be painted in Wash Mode only."
msgstr ""
#. +> trunk5 stable5
#: libs/ui/tool/kis_tool.cc:681
#, kde-format
msgid "Group not editable."
msgstr ""
#. +> trunk5 stable5
#: libs/ui/tool/kis_tool.cc:696
#, kde-format
msgid "Local selection is locked."
msgstr ""
#. +> trunk5 stable5
#: libs/ui/tool/kis_tool_freehand.cc:210
#, kde-format
msgid "The brush tool cannot paint on this layer. Please select a paint layer or mask."
#. i18nc("Who made the profile?","Manufacturer: ") + currentColorSpace()->profile()->manufacturer() + "</p>"); //This would work if people actually wrote the manufacturer into the manufacturer fiedl...
"<b><a href=\"https://en.wikipedia.org/wiki/RGB_color_space\">RGB (Red, Green, Blue)</a></b>, is the color model used by screens and other light-based media.<br/>"
"RGB is an additive color model: adding colors together makes them brighter. This color model is the most extensive of all color models, and is recommended as a model for painting,that you can later convert to other spaces. RGB is also the recommended colorspace for HDR editing."
"<b><a href=\"https://en.wikipedia.org/wiki/CMYK_color_model\">CMYK (Cyan, Magenta, Yellow, Key)</a></b>, is the model used by printers and other ink-based media.<br/>"
"CMYK is a subtractive model, meaning that adding colors together will turn them darker. Because of CMYK profiles being very specific per printer, it is recommended to work in RGB space, and then later convert to a CMYK profile, preferably one delivered by your printer. <br/>"
"CMYK is <b>not</b> recommended for painting.Unfortunately, Krita cannot retrieve colorants or the TRC for this space."
msgid "<b><a href=\"https://en.wikipedia.org/wiki/CIE_1931_color_space\">CIE XYZ</a></b>is the space determined by the CIE as the space that encompasses all other colors, and used to convert colors between profiles. XYZ is an additive color model, meaning that adding colors together makes them brighter. XYZ is <b>not</b> recommended for painting, but can be useful to encode in. The Tone Response Curve is assumed to be linear."
"<b><a href=\"https://en.wikipedia.org/wiki/Grayscale\">Grayscale</a></b> only allows for gray values and transparent values. Grayscale images use half the memory and disk space compared to an RGB image of the same bit-depth.<br/>"
"Grayscale is useful for inking and greyscale images. In Krita, you can mix Grayscale and RGB layers in the same image."
"<b><a href=\"https://en.wikipedia.org/wiki/Lab_color_space\">L*a*b</a></b>. <b>L<b> stands for Lightness, the <b>a</b> and <b>b</b> components represent color channels.<br/>"
"L*a*b is a special model for color correction. It is based on human perception, meaning that it tries to encode the difference in lightness, red-green balance and yellow-blue balance. This makes it useful for color correction, but the vast majority of color maths in the blending modes do <b>not</b> work as expected here.<br/>"
"Similarly, Krita does not support HDR in LAB, meaning that HDR images converted to LAB lose color information. This colorspace is <b>not</b> recommended for painting, nor for export, but best as a space to do post-processing in. The TRC is assumed to be the L* TRC."
msgid "<b><a href=\"https://en.wikipedia.org/wiki/YCbCr\">YCbCr (Luma, Blue Chroma, Red Chroma)</a></b>, is a model designed for video encoding. It is based on human perception, meaning that it tries to encode the difference in lightness, red-green balance and yellow-blue balance. Chroma in this case is then a word indicating a special type of saturation, in these cases the saturation of Red and Blue, of which the desaturated equivalents are Green and Yellow respectively. It is available to open up certain images correctly, but Krita does not currently ship a profile for this due to lack of open source ICC profiles for YCrCb."
msgid "<b>8 bit integer</b>: The default number of colors per channel. Each channel will have 256 values available, leading to a total amount of colors of 256 to the power of the number of channels. Recommended to use for images intended for the web, or otherwise simple images."
msgid "<b>16 bit integer</b>: Also known as 'deep color'. 16 bit is ideal for editing images with a linear TRC, large color space, or just when you need more precise color blending. This does take twice as much space on the RAM and hard-drive than any given 8 bit image of the same properties, and for some devices it takes much more processing power. We recommend watching the RAM usage of the file carefully, or otherwise use 8 bit if your computer slows down. Take care to disable conversion optimization when converting from 16 bit/channel to 8 bit/channel."
msgctxt "When the selected Bitdepth is 16 bit float"
msgid "<b>16 bit floating point</b>: Also known as 'Half Floating Point', and the standard in VFX industry images. 16 bit float is ideal for editing images with a linear Tone Response Curve, large color space, or just when you need more precise color blending. It being floating point is an absolute requirement for Scene Referred (HDR) images. This does take twice as much space on the RAM and hard-drive than any given 8 bit image of the same properties, and for some devices it takes much more processing power. We recommend watching the RAM usage of the file carefully, or otherwise use 8 bit if your computer slows down."
msgctxt "When the selected Bitdepth is 32bit float"
msgid "<b>32 bit float point</b>: Also known as 'Full Floating Point'. 32 bit float is ideal for editing images with a linear TRC, large color space, or just when you need more precise color blending. It being floating point is an absolute requirement for Scene Referred (HDR) images. This does take four times as much space on the RAM and hard-drive than any given 8 bit image of the same properties, and for some devices it takes much more processing power. We recommend watching the RAM usage of the file carefully, or otherwise use 8 bit if your computer slows down."
msgctxt "When the selected Bitdepth is 64bit float, but this isn't actually available in Krita at the moment."
msgid "<b>64 bit float point</b>: 64 bit float is as precise as it gets in current technology, and this depth is used most of the time for images that are generated or used as an input for software. It being floating point is an absolute requirement for Scene Referred (HDR) images. This does take eight times as much space on the RAM and hard-drive than any given 8 bit image of the same properties, and for some devices it takes much more processing power. We recommend watching the RAM usage of the file carefully, or otherwise use 8 bit if your computer slows down."
msgctxt "These are Elle Stone's notes on her profiles that we ship."
msgid ""
"<p><b>Extra notes on profiles by Elle Stone:</b></p>"
"<p><i>Krita comes with a number of high quality profiles created by <a href=\"http://ninedegreesbelow.com\">Elle Stone</a>. This is a summary. Please check <a href=\"http://ninedegreesbelow.com/photography/lcms-make-icc-profiles.html\">the full documentation</a> as well.</i></p>"
msgid "<p>Quoting Wikipedia, 'Academy Color Encoding System (ACES) is a color image encoding system proposed by the Academy of Motion Picture Arts and Sciences that will allow for a fully encompassing color accurate workflow, with 'seamless interchange of high quality motion picture images regardless of source'.</p>"
msgid "<p>The ACEScg color space is smaller than the ACES color space, but large enough to contain the 'Rec-2020 gamut and the DCI-P3 gamut', unlike the ACES color space it has no negative values and contains only few colors that fall just barely outside the area of real colors humans can see</p>"
"<p>To avoid possible copyright infringement issues, I used 'ClayRGB' (following ArgyllCMS) as the base name for these profiles. As used below, 'Compatible with Adobe RGB 1998' is terminology suggested in the preamble to the AdobeRGB 1998 color space specifications.</p>"
"<p>The Adobe RGB 1998 color gamut covers a higher percentage of real-world cyans, greens, and yellow-greens than sRGB, but still doesn't include all printable cyans, greens, yellow-greens, especially when printing using today's high-end, wider gamut, ink jet printers. BetaRGB (not included in the profile pack) and Rec.2020 are better matches for the color gamuts of today's wide gamut printers.</p>"
"<p>The Adobe RGB 1998 color gamut is a reasonable approximation to some of today's high-end wide gamut monitors.</p>"
"<p>This profile's color gamut is roughly the same size and shape as the ACES color space gamut, and like the ACES color space, AllColorsRGB holds all possible real colors. But AllColorsRGB actually has a slightly larger color gamut (to capture some fringe colors that barely qualify as real when viewed by the standard observer) and uses the D50 white point.</p>"
"<p>Just like the ACES color space, AllColorsRGB holds a high percentage of imaginary colors. See the Completely <a href=\"http://ninedegreesbelow.com/photography/xyz-rgb.html\">Painless Programmer's Guide to XYZ, RGB, ICC, xyY, and TRCs</a> for more information about imaginary colors.</p>"
"<p>There is no particular reason why anyone would want to use this profile for editing, unless one needs to make sure your color space really does hold all possible real colors.</p>"
"<p>This profile is included mostly for its historical significance. It's the color space that was used in the original color matching experiments that led to the creation of the XYZ reference color space.</p>"
"<p>The ASTM E white point is probably the right E white point to use when making the CIERGB color space profile. It's not clear to me what the correct CIERGB primaries really are. Lindbloom gives one set. The LCMS version 1 tutorial gives a different set. Experts in the field contend that the real primaries should be calculated from the spectral wavelengths, so I did.</p>"
msgid "<p>The IdentityRGB working space is included in the profile pack because it's a mathematically obvious way to include all possible visible colors, though it has a higher percentage of imaginary colors than the ACES and AllColorsRGB color spaces. I cannot think of any reason why you'd ever want to actually edit images in the IdentityRGB working space.</p>"
"<p>To avoid possible copyright infringement issues, I used 'LargeRGB' (following RawTherapee) as the base name for these profiles."
"<p>Kodak designed the RIMM/ROMM (ProPhotoRGB) color gamut to include all printable and most real world colors. It includes some imaginary colors and excludes some of the real world blues and violet blues that can be captured by digital cameras. It also excludes some very saturated 'camera-captured' yellows as interpreted by some (and probably many) camera matrix input profiles."
"<p>The ProPhotoRGB primaries are hard-coded into Adobe products such as Lightroom and the Dng-DCP camera 'profiles'. However, other than being large enough to hold a lot of colors, ProPhotoRGB has no particular merit as an RGB working space. Personally and for most editing purposes, I recommend BetaRGB, Rec2020, or the ACEScg profiles ProPhotoRGB.</p>"
msgid "<p>Rec.2020 is the up-and-coming replacement for the thoroughly outdated sRGB color space. As of June 2015, very few (if any) display devices (and certainly no affordable display devices) can display all of Rec.2020. However, display technology is closing in on Rec.2020, movies are already being made for Rec.2020, and various cameras offer support for Rec.2020. And in the digital darkroom Rec.2020 is much more suitable as a general RGB working space than the exceedingly small sRGB color space.</p>"
"<p>Hewlett-Packard and Microsoft designed sRGB to match the color gamut of consumer-grade CRTs from the 1990s. sRGB is the standard color space for the world wide web and is still the best choice for exporting images to the internet.</p>"
"<p>The sRGB color gamut was a good match to calibrated decent quality CRTs. But sRGB is not a good match to many consumer-grade LCD monitors, which often cannot display the more saturated sRGB blues and magentas (the good news: as technology progresses, wider gamuts are trickling down to consumer grade monitors).</p>"
"<p>Printer color gamuts can easily exceed the sRGB color gamut in cyans, greens, and yellow-greens. Colors from interpolated camera raw files also often exceed the sRGB color gamut.</p>"
"<p>As a very relevant aside, using perceptual intent when converting to sRGB does not magically makes otherwise out of gamut colors fit inside the sRGB color gamut! The standard sRGB color space (along with all the other the RGB profiles provided in my profile pack) is a matrix profile, and matrix profiles don't have perceptual intent tables.</p>"
"<p>To avoid possible copyright infringement issues, I used 'WideRGB' as the base name for these profiles.</p>"
"<p>WideGamutRGB was designed by Adobe to be a wide gamut color space that uses spectral colors as its primaries. Pascale's primary values produce a profile that matches old V2 Widegamut profiles from Adobe and Canon. It is an interesting color space, but shortly after its introduction, Adobe switched their emphasis to the ProPhotoRGB color space.</p>"
msgid "<p>These profiles are for use with RGB images that have been converted to monotone gray (black and white). The main reason to convert from RGB to Gray is to save the file space needed to encode the image. Google places a premium on fast-loading web pages, and images are one of the slower-loading elements of a web page. So converting black and white images to Grayscale images does save some kilobytes. For grayscale images uploaded to the internet, convert the image to the V2 Gray profile with the sRGB TRC.</p>"
msgid "<p>The profiles that end in '-g10.icc' are linear gamma (gamma=1.0, 'linear light', etc) profiles and should only be used when editing at high bit depths (16-bit floating point, 16-bit integer, 32-bit floating point, 32-bit integer). Many editing operations produce better results in linear gamma color spaces.</p>"
msgid "<p>The profiles that end in '-labl.icc' have perceptually uniform TRCs. A few editing operations really should be done on perceptually uniform RGB. Make sure you use the V4 versions for editing high bit depth images.</p>"
msgid "<p>The profiles that end in '-srgbtrc.icc', '-g22.icc', and '-bt709.icc' have approximately but not exactly perceptually uniform TRCs. ProPhotoRGB's gamma=1.8 TRC is not quite as close to being perceptually uniform.</p>"
msgid "<p>When editing 8-bit images, you should use a profile with a small color gamut and an approximately or exactly perceptually uniform TRC. Of the profiles supplied in my profile pack, only the sRGB and AdobeRGB1998 (ClayRGB) color spaces are small enough for 8-bit editing. Even with the AdobeRGB1998 color space you need to be careful to not cause posterization. And of course you cannot use the linear gamma versions of these profiles for 8-bit editing.</p>"
msgid "<p>Use V4 profiles for editing images using high bit depth image editors that use LCMS as the Color Management Module. This includes Krita, digiKam/showFoto, and GIMP 2.9.</p>"
msgctxt "combo box: select all layers without a label"
msgid "No Label"
msgstr ""
#. +> trunk5
#: libs/ui/widgets/kis_custom_image_widget.cc:113
#, kde-format
msgid "&Create"
msgstr ""
#. +> stable5
#: libs/ui/widgets/kis_custom_image_widget.cc:112
#, kde-format
msgid "Create"
msgstr ""
#. +> trunk5 stable5
#: libs/ui/widgets/kis_custom_image_widget.cc:277
#, kde-format
msgid ""
"Linear gamma RGB color spaces are not supposed to be used in 8-bit integer modes. It is suggested to use 16-bit integer or any floating point colorspace for linear profiles.\n"
"\n"
"Press \"Ok\" to create a 8-bit integer linear RGB color space or \"Cancel\" to return to the settings dialog."
msgstr ""
#. +> stable5
#: libs/ui/widgets/kis_custom_image_widget.cc:502
#, kde-format
msgid "bytes"
msgstr ""
#. +> trunk5
#: libs/ui/widgets/kis_custom_image_widget.cc:504
#, kde-format
msgctxt "arg1: width. arg2: height. arg3: colorspace name. arg4: size of a channel in bits. arg5: image size"
msgid "This document will be %1 pixels by %2 pixels in %3, which means the pixel size is %4 bit. A single paint layer will thus take up %5 of RAM."
msgstr ""
#. +> stable5
#: libs/ui/widgets/kis_custom_image_widget.cc:505
#, kde-format
msgctxt "Abbreviation for kilobyte"
msgid "KB"
msgstr ""
#. +> stable5
#: libs/ui/widgets/kis_custom_image_widget.cc:509
#, kde-format
msgctxt "Abbreviation for megabyte"
msgid "MB"
msgstr ""
#. +> stable5
#: libs/ui/widgets/kis_custom_image_widget.cc:513
#, kde-format
msgctxt "Abbreviation for gigabyte"
msgid "GB"
msgstr ""
#. +> stable5
#: libs/ui/widgets/kis_custom_image_widget.cc:516
#, kde-format
msgctxt "arg1: width. arg2: height. arg3: colorspace name. arg4: size of a channel in bits. arg5: size in unites of arg6. Arg6: KB, MB or GB"
msgid "This document will be %1 pixels by %2 pixels in %3, which means the pixel size is %4 bit. A single paint layer will thus take up %5 %6 of RAM."
msgid "A spot color is a color that the printer is able to print without mixing the paints it has available to it. The opposite is called a process color."
"<html><b>KDE</b> is a world-wide network of software engineers, artists, writers, translators and facilitators who are committed to <a href=\"%1\">Free Software</a> development. This community has created hundreds of Free Software applications as part of the KDE frameworks, workspaces and applications.<br />"
"<br />"
"KDE is a cooperative enterprise in which no single entity controls the efforts or products of KDE to the exclusion of others. Everyone is welcome to join and contribute to KDE, including you.<br />"
"<br />"
"Visit <a href=\"%2\">%2</a> for more information about the KDE community and the software we produce.</html>"
"<html>Software can always be improved, and the KDE team is ready to do so. However, you - the user - must tell us when something does not work as expected or could be done better.<br />"
"<br />"
"KDE has a bug tracking system. Visit <a href=\"%1\">%1</a> or use the \"Report Bug...\" dialog from the \"Help\" menu to report bugs.<br />"
"<br />"
"If you have a suggestion for improvement then you are welcome to use the bug tracking system to register your wish. Make sure you use the severity called \"Wishlist\".</html>"
"<html>You do not have to be a software developer to be a member of the KDE team. You can join the national teams that translate program interfaces. You can provide graphics, themes, sounds, and improved documentation. You decide!<br />"
"<br />"
"Visit <a href=\"%1\">%1</a> for information on some projects in which you can participate.<br />"
"<br />"
"If you need more information or documentation, then a visit to <a href=\"%2\">%2</a> will provide you with what you need.</html>"
"<html>KDE software is and will always be available free of charge, however creating it is not free.<br />"
"<br />"
"To support development the KDE community has formed the KDE e.V., a non-profit organization legally founded in Germany. KDE e.V. represents the KDE community in legal and financial matters. See <a href=\"%1\">%1</a> for information on KDE e.V.<br />"
"<br />"
"KDE benefits from many kinds of contributions, including financial. We use the funds to reimburse members and others for expenses they incur when contributing. Further funds are used for legal support and organizing conferences and meetings. <br />"
" <br />"
"We would like to encourage you to support our efforts with a financial donation, using one of the ways described at <a href=\"%2\">%2</a>.<br />"
"<br />"
"Thank you very much in advance for your support.</html>"
"<p>Please read <b><a href=\"https://docs.krita.org/en/untranslatable_pages/reporting_bugs.html\">this guide</a></b> for reporting bugs first!</p>"
"<p>To submit a bug report, click on the button below. This will open a web browser window on <a href=\"http://bugs.kde.org\">http://bugs.kde.org</a> where you will find a form to fill in. The information displayed above will be transferred to that server.</p>"
msgid "Here you can see a list of key bindings, i.e. associations between actions (e.g. 'Copy') shown in the left column and keys or combination of keys (e.g. Ctrl+V) shown in the right column."
msgid "Values goes from black to white, or black to the most saturated colour. Saturation, in turn, goes from the most saturated colour to white, grey or black."
"<p>This sets the gamma value that the linearised HSY Luminosity is crunched with. 1 makes the selector fully linear, 2.2 is a practical default value.</p>"
msgid "The location of FFmpeg is unknown. Please install FFmpeg first: Krita cannot render animations without FFmpeg. (<a href=\"https://www.ffmpeg.org\">www.ffmpeg.org</a>)"
msgid "Krita tries to automatically check or uncheck this based on the information it can get from the profile you are converting from and the profile you are converting to."
msgid "The icon associated with this action. It is shown alongside text in the menu bar and in toolbars as required. A string to use KDE's image loading system, or a custom QPixmap or QIcon, or None."
msgid "<p>Failed to check version of dependency <application>%1</application>: Module do not have PEP396 <code>__version__</code> attribute. It is not disabled, but behaviour is unpredictable...</p>"
"<p>Select the location of the G'Mic-Qt plugin. You can download the plugin from the <a href=\"http://gmic.eu/\"><span style=\" text-decoration: underline; color:#2980b9;\">G'Mic website</span></a>. Make sure you download the special version for Krita, not the standalone or the GIMP version.</p>"
msgid "The formula decides how the kernel is created, so different formulas choose different values in the kernel, and thus give subtly different results."
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-family:'MS Shell Dlg 2'; font-size:8pt;\">This is a line of text before the inserted text. This is a line of inserted text. This is a line after the inserted text.</span></p>"
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-family:'MS Shell Dlg 2'; font-size:8pt;\">This is a line of text before the deleted text. This is a line of deleted text. This is a line after the deleted text.</span></p>"
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-family:'MS Shell Dlg 2'; font-size:8pt;\">This is a line of text before the format-change text. This is a line of text whose format has been changed. This is a line of text after the format-change text.</span></p>"
"<p style=\" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">It is possible to assign a named style to text and alter the style properties to change all text with that style.</p>"
"\n"
"<p style=\" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Applying a style change will reformat all text that previously got the named style assigned to it. Use the Styles docker to apply styles to text.</p>"
"The image contains pixels with zero alpha channel and non-zero color channels. Krita has modified those pixels to have at least some alpha. The initial values will <i>not</i> be reverted on saving the image back.<br/>"
"<br/>"
"This will hardly make any visual difference just keep it in mind."
msgstr ""
#. +> trunk5 stable5
#: plugins/impex/exr/exr_converter.cc:877
#, kde-format
msgctxt "@title:window"
msgid "EXR image has been modified"
msgstr ""
#. +> trunk5 stable5
#: plugins/impex/exr/exr_converter.cc:1244
#, kde-format
msgctxt "@item:unsupported-node-message"
msgid "%1 (type: \"%2\")"
msgstr ""
#. +> trunk5 stable5
#: plugins/impex/exr/exr_converter.cc:1249
#, kde-format
msgctxt "@info"
msgid ""
"<p>The following layers have a type that is not supported by EXR format:</p>"
"<r>"
"<ul>%1</ul>"
"</p>"
"<p><warning>these layers have <b>not</b> been saved to the final EXR file</warning></p>"
msgstr ""
#. +> trunk5 stable5
#: plugins/impex/exr/exr_export.cc:91
#, kde-format
msgid "This layer cannot be saved to EXR."
msgstr ""
#. +> trunk5 stable5
#: plugins/impex/exr/exr_export.cc:95
#, kde-format
msgid "The layer does not have an image associated with it."
msgstr ""
#. +> trunk5 stable5
#: plugins/impex/exr/exr_export.cc:99
#, kde-format
msgid "The filename is empty."
msgstr ""
#. +> trunk5 stable5
#: plugins/impex/exr/exr_export.cc:103
#, kde-format
msgid "EXR images cannot be saved remotely."
msgstr ""
#. +> trunk5 stable5
#: plugins/impex/exr/exr_export.cc:107
#, kde-format
msgid "Colorspace not supported: EXR images must be 16 or 32 bits floating point RGB."
msgid "This option will merge all layers. It is advisable to check this option, otherwise other applications might not be able to read your file correctly."
msgid "Indexed PNG images are smaller. If you enabled this option, your image will be analyzed to see whether it is possible to save as an indexed PNG."
"<p><span style=\" font-weight:600;\">PNG</span> files have <span style=\" font-style:italic;\">two</span> options to save <span style=\" font-weight:600;\">sRGB</span> information: as a tag or as an explicit profile. For use with in websites, <span style=\" font-style:italic;\">disable</span> this option. For interchange with other applications, <span style=\" font-style:italic;\">enable</span> this option.</p>"
"<p>If enabled, all RAW files will be decoded in 16-bit color depth using a linear gamma curve. To prevent dark picture rendering in the editor, it is recommended to use Color Management in this mode.</p>"
"<p>If disabled, all RAW files will be decoded in 8-bit color depth with a BT.709 gamma curve and a 99th-percentile white point. This mode is faster than 16-bit decoding.</p>"
"<p>The default is to assume that all green pixels are the same. If even-row green pixels are more sensitive to ultraviolet light than odd-row this difference causes a mesh pattern in the output; using this option solves this problem with minimal loss of detail.</p>"
"<p>To resume, this option blurs the image a little, but it eliminates false 2x2 mesh patterns with VNG quality method or mazes with AHD quality method.</p>"
"<p>For Fuji Super CCD cameras, show the image tilted 45 degrees. For cameras with non-square pixels, do not stretch the image to its correct aspect ratio. In any case, this option guarantees that each output pixel corresponds to one RAW pixel.</p>"
"<p>Select here the demosaicing method to use when decoding RAW images. A demosaicing algorithm is a digital image process used to interpolate a complete image from the partial raw data received from the color-filtered image sensor, internal to many digital cameras, in form of a matrix of colored pixels. Also known as CFA interpolation or color reconstruction, another common spelling is demosaicing. The following methods are available for demosaicing RAW images:</p>"
"<p>"
"<ul>"
"<li><emphasis strong='true'>Bilinear</emphasis>: use high-speed but low-quality bilinear interpolation (default - for slow computers). In this method, the red value of a non-red pixel is computed as the average of the adjacent red pixels, and similarly for blue and green.</li>"
"<li><emphasis strong='true'>VNG</emphasis>: use Variable Number of Gradients interpolation. This method computes gradients near the pixel of interest and uses the lower gradients (representing smoother and more similar parts of the image) to make an estimate.</li>"
"<li><emphasis strong='true'>PPG</emphasis>: use Patterned-Pixel-Grouping interpolation. Pixel Grouping uses assumptions about natural scenery in making estimates. It has fewer color artifacts on natural images than the Variable Number of Gradients method.</li>"
"<li><emphasis strong='true'>AHD</emphasis>: use Adaptive Homogeneity-Directed interpolation. This method selects the direction of interpolation so as to maximize a homogeneity metric, thus typically minimizing color artifacts.</li>"
"<li><emphasis strong='true'>DCB</emphasis>: DCB interpolation from linuxphoto.org project.</li>"
"<li><emphasis strong='true'>AHD v2</emphasis>: modified AHD interpolation using Variance of Color Differences method.</li>"
"<li><emphasis strong='true'>AFD</emphasis>: Adaptive Filtered Demosaicing interpolation through 5 pass median filter from PerfectRaw project.</li>"
"<li><emphasis strong='true'>VCD</emphasis>: Variance of Color Differences interpolation.</li>"
"<li><emphasis strong='true'>VCD & AHD</emphasis>: Mixed demosaicing between VCD and AHD.</li>"
"<li><emphasis strong='true'>LMMSE</emphasis>: color demosaicing via directional linear minimum mean-square error estimation interpolation from PerfectRaw.</li>"
"<li><emphasis strong='true'>AMaZE</emphasis>: Aliasing Minimization interpolation and Zipper Elimination to apply color aberration removal from RawTherapee project.</li>"
"</ul>"
"</p>"
"<p>Note: some methods can be unavailable if RAW decoder have been built without extension packs.</p>"
"<p>Set here the passes used by the median filter applied after interpolation to Red-Green and Blue-Green channels.</p>"
"<p>This setting is only available for specific Quality options: <emphasis strong='true'>Bilinear</emphasis>, <emphasis strong='true'>VNG</emphasis>, <emphasis strong='true'>PPG</emphasis>, <emphasis strong='true'>AHD</emphasis>, <emphasis strong='true'>DCB</emphasis>, and <emphasis strong='true'>VCD & AHD</emphasis>.</p>"
"<li><emphasis strong='true'>Default D65</emphasis>: Use a standard daylight D65 white balance.</li>"
"<li><emphasis strong='true'>Camera</emphasis>: Use the white balance specified by the camera. If not available, reverts to default neutral white balance.</li>"
"<li><emphasis strong='true'>Automatic</emphasis>: Calculates an automatic white balance averaging the entire image.</li>"
"<li><emphasis strong='true'>Manual</emphasis>: Set a custom temperature and green level values.</li>"
msgid "<p>If enabled, images with overblown channels are processed much more accurately, without 'pink clouds' (and blue highlights under tungsten lamps).</p>"
"<p>Select here the noise reduction method to apply during RAW decoding.</p>"
"<p>"
"<ul>"
"<li><emphasis strong='true'>None</emphasis>: no noise reduction.</li>"
"<li><emphasis strong='true'>Wavelets</emphasis>: wavelets correction to erase noise while preserving real detail. It's applied after interpolation.</li>"
"<li><emphasis strong='true'>FBDD</emphasis>: Fake Before Demosaicing Denoising noise reduction. It's applied before interpolation.</li>"
"<li><emphasis strong='true'>CFA Line Denoise</emphasis>: Banding noise suppression. It's applied after interpolation.</li>"
"<li><emphasis strong='true'>Impulse Denoise</emphasis>: Impulse noise suppression. It's applied after interpolation.</li>"
"<p>If this option is turned on, it will try to shift image channels slightly and evaluate Chromatic Aberration change. Note that if you shot blue-red pattern, the method may fail. In this case, disable this option and tune manually color factors.</p>"
"<p>Select here the output color space used to decode RAW data.</p>"
"<p>"
"<ul>"
"<li><emphasis strong='true'>Raw (no profile)</emphasis>: in this mode, no output color space is used during RAW decoding.</li>"
"<li><emphasis strong='true'>sRGB</emphasis>: this is an RGB color space, created cooperatively by Hewlett-Packard and Microsoft. It is the best choice for images destined for the Web and portrait photography.</li>"
"<li><emphasis strong='true'>Adobe RGB</emphasis>: this color space is an extended RGB color space, developed by Adobe. It is used for photography applications such as advertising and fine art.</li>"
"<li><emphasis strong='true'>Wide Gamut</emphasis>: this color space is an expanded version of the Adobe RGB color space.</li>"
"<li><emphasis strong='true'>Pro-Photo</emphasis>: this color space is an RGB color space, developed by Kodak, that offers an especially large gamut designed for use with photographic outputs in mind.</li>"
"<li><emphasis strong='true'>Custom</emphasis>: use a custom output color space profile.</li>"
msgid "This determines every interval after which the precision should change. For example: if the delta value is set to be 15.00, after every 15 pts change in the size of brush, the precision will change."
msgid "If checked, grid brush fill every particle's background with background color. The background of particle is rectangle of grid width and height and by default it is transparent."
"<p><b>Painting mode</b>: Krita offers a choice between two painting modes: <i>buildup</i> and <i>wash</i>. The first choice builds up color while painting in one stroke, the second choices gives you an even color in one stroke even if you go over the same place again and again.</p>"
msgid "These are keywords that can be used to identify text layers. A layer only needs to contain the keyword to be recognized. Keywords should be comma separated."
msgid "These are keywords that can be used to identify panel layers. A layer only needs to contain the keyword to be recognized. Keywords should be comma separated."
msgid "By default this will be filled with a generated universal unique identifier. The ID by itself is merely so that comic book library management programs can figure out if this particular comic is already in their database and whether it has been rated. Of course, the UUID can be changed into something else by manually changing the JSON, but this is advanced usage."
msgid "Whether the acbf file is an adaption of an existing source, and if so, how to find information about that source. So for example, for an adapted webcomic, the official website url should go here."
msgid "The genre of the work. Prefilled values are from the ACBF, but you can fill in your own. Separate genres with commas. Try to limit the amount to about two or three."
msgid "The following is a table of the authors that contributed to this comic. You can set their nickname, proper names (first, middle, last), role (penciller, inker, etc), email and homepage."
msgid "If there is an entry in a comics data base, that should be added here. It is unlikely to be a factor for comics from scratch, but useful when doing a conversion."
msgid "Whether the comic is an adaption of an existing source, and if so, how to find information about that source. So for example, for an adapted webcomic, the official website url should go here."
msgid "The location for extra autocompletion keys in the metadata editor. Point this at a folder containing key_characters/key_format/key_genre/key_rating/key_author_roles/key_other with inside txt files (csv for rating) containing the extra auto-completion keys, each on a new line. This path is stored in the Krita configuration, and not the project configuration."
"This allows you to make a template document with guides.\n"
"The width and height are the size of the live-area, the safe area is the live area minus the margins, and the full image is the live area plus the bleeds."
"<p>Your name for your script. This is used to calculate the name of your package, the name of the class in your package and the associated directory.</p>"
"<p>What you want to appear in the Tools-> Scripts menu. If you leave this blank a default entry will be created based on the name of the script. </p>"
"<p>If this is checked your script will be automatically enabled in Krita. That is, it will show up in the Scripts menu or docker list. If not, you will need to manually enable the script through the Krita->Settings menu entry. </p>"
msgid "<nobr>Blending controls the percentage of color that is picked</nobr> and mixed with your current brush color. A full blending value picks colors completely, ignoring brush color."
"<p>In \"Global Coordinates\" mode Width and Height fields show the size of the shape's bounding box in image-aligned coordinates, even when the shape is rotated or has any other transform. </p>"
"<p>If \"Global Coordinates\" mode is disabled, Width and Height fields show the shape's \"local\" size, before application of any transformations.</p>"
msgid "Sorry, Krita was built without the support of GNU Scientific Library, so you cannot scale the selection with handles. Please compile Krita with GNU Scientific Library support, or use options widget for editing scale values manually."
msgid "Switch between Build Up and Wash mode of painting. Build Up mode adds deformations one on top of the other without any limits. Wash mode gradually deforms the piece to the selected deformation level."
msgid "KTorrent is unable to accept connections because the TCP port %1 is already in use by another program."
msgstr ""
#. +> trunk5 stable5
#: ktorrent/core.cpp:185
#, kde-format
msgid "KTorrent is unable to accept connections because the UDP port %1 is already in use by another program."
msgstr ""
#. +> trunk5 stable5
#: ktorrent/core.cpp:291
#, kde-format
msgid "Opening the torrent <b>%1</b>, would share one or more files with the following torrents. Torrents are not allowed to write to the same files. "
msgstr ""
#. +> trunk5 stable5
#: ktorrent/core.cpp:975
#, kde-format
msgid "KTorrent is running one or more torrents"
msgstr ""
#. +> trunk5 stable5
#: ktorrent/core.cpp:1074
#, kde-format
msgid "Cannot create torrent: %1"
msgstr ""
#. +> trunk5 stable5
#: ktorrent/core.cpp:1177
#, kde-format
msgid "One or more storage volumes are not mounted. In order to start this torrent, they need to be mounted."
msgstr ""
#. +> trunk5 stable5
#: ktorrent/core.cpp:1178
#, kde-format
msgid "Retry"
msgstr ""
#. +> trunk5 stable5
#: ktorrent/core.cpp:1187
#, kde-format
msgid "Storage volume %1 is not mounted"
msgstr ""
#. +> trunk5 stable5
#: ktorrent/core.cpp:1189
#, kde-format
msgid "Storage volumes %1 are not mounted"
msgstr ""
#. +> trunk5 stable5
#: ktorrent/core.cpp:1201
#, kde-format
msgid ""
"Several data files of the torrent \"%1\" are missing. \n"
"Do you want to recreate them, or do you want to not download them?"
msgid "Some files of this torrent have been found in the completed downloads directory. Do you want to import these files and use the completed downloads directory as the location?"
msgstr ""
#. +> trunk5 stable5
#: ktorrent/dialogs/fileselectdlg.cpp:241
#, kde-format
msgid "All files of this torrent have been found in the completed downloads directory. Do you want to import these files and use the completed downloads directory as the location?"
msgstr ""
#. +> trunk5 stable5
#: ktorrent/dialogs/fileselectdlg.cpp:245
#, kde-format
msgid "The file <b>%1</b> was found in the completed downloads directory. Do you want to import this file?"
msgstr ""
#. +> trunk5 stable5
#: ktorrent/dialogs/fileselectdlg.cpp:260
#: ktorrent/dialogs/fileselectdlg.cpp:277
#, kde-format
msgid "The directory %1 does not exist, do you want to create it?"
msgstr ""
#. +> trunk5 stable5
#: ktorrent/dialogs/fileselectdlg.cpp:310
#, kde-format
msgid "You have deselected the following existing files. You will lose all data in these files, are you sure you want to do this?"
msgstr ""
#. +> trunk5 stable5
#: ktorrent/dialogs/fileselectdlg.cpp:314
#, kde-format
msgid "Yes, delete the files"
msgstr ""
#. +> trunk5 stable5
#: ktorrent/dialogs/fileselectdlg.cpp:315
#, kde-format
msgid "No, keep the files"
msgstr ""
#. +> trunk5 stable5
#: ktorrent/dialogs/fileselectdlg.cpp:340
#, kde-format
msgid "Opening the torrent <b>%1</b>, would share one or more files with the following torrents. Torrents are not allowed to write to the same files. Please select a different location."
"Default save location for torrents from this group. <br/>"
"<br/>"
"This is only used in the file selection dialog, when you change the group, the download location in the dialog will be set to this. You can still override it, if you want to."
"Default move on completion location for torrents from this group. <br/>"
"<br/>"
"This is only used in the file selection dialog, when you change the group, the move when completed location in the dialog will be set to this. You can still override it, if you want to."
"When this is enabled, these settings will only be applied when a torrent is added to the group in the file selection dialog or the torrent creation dialog."
"<p>\n"
"If this is not enabled, the settings will always be applied when you add a torrent to this group. "
"<p>Amount of time the network threads will sleep when they are speed limited. This has absolutely no effect when there are no speed limits.</p>"
"\n"
"<p><span style=\" font-weight:600;\">Note:</span> The lower this is the more CPU is used. Setting it high can lead to lower speeds in high bandwidth situations. </p>"
"\n"
"<p>For example on an 100 Mbit LAN, if you set a limit of 3000 KiB/s, you might not actually reach this speed when this value is too high. Without a limit you can easily get above 3000 KiB/s on a LAN.</p>"
"<p><span style=\" font-weight:600;\">Attention:</span> If you are behind a router, this port needs to be forwarded to accept incoming DHT requests. The UPnP plugin can do this for you.</p>"
msgid "Not all clients support encryption, and some people have encryption disabled. If you want to connect to those peers, you need to have this option enabled."
msgstr ""
#. i18n: ectx: label, entry (allowUnencryptedConnections), group (downloads)
msgid "Custom IP address or hostname to send to the tracker. Hostnames will be resolved at runtime and the resolved IP address will be sent to the tracker."
"<p>Rename a single file torrent with the name of its only file. </p>"
"\n"
"<p>If for example the file is named <span style=\" font-weight:600;\">linux-desktop.iso</span>, the torrent will be displayed as <span style=\" font-weight:600;\">linux-desktop.</span></p>"
"<p><span style=\" font-weight:600;\">Attention:</span> If you are behind a router, this port needs to be forwarded to accept incoming connections. The UPnP plugin can do this for you.</p>"
"<p><span style=\" font-weight:600;\">Attention:</span> If you are behind a router, this port needs to be forwarded. The UPnP plugin can do this for you.</p>"
msgid "Don't use TCP for bittorrent connections, only use the µTP protocol. This can lead to slower speeds, seeing that not all bittorrent clients support µTP."
"<p>The maximum share ratio, if this value is reached seeding will be stopped. This is only applied to newly opened torrents, existing torrents will not be affected by changing this.</p>"
"\n"
"<p><span style=\" font-weight:600;\">Attention: </span>This is not used when downloading, only when seeding.</p>"
msgid "The maximum seed time in hours. Once you reach this time, the torrent will be stopped. This is only applied to newly opened torrents, existing torrents will not be affected by changing this."
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Superseeding mode, is a special seeding mode which allows you to achieve much higher seeding efficiencies. This results in less bandwidth used to spread a torrent.</p>"
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-weight:600;\">Note: </span>This should only be used if the swarm has not fully been established. Once there are multiple active seeders, this mode becomes useless.</p>"
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Webseed to add to the torrent.</p>"
msgid "Enter the hostname of the search engine (for example www.google.com):"
msgstr ""
#. +> trunk5 stable5
#: plugins/search/searchprefpage.cpp:141
#, kde-format
msgid "Opensearch is not supported by %1, you will need to enter the search URL manually. The URL should contain {searchTerms}, ktorrent will replace this by the thing you are searching for."
msgstr ""
#. +> trunk5 stable5
#: plugins/search/searchprefpage.cpp:148
#, kde-format
msgid "The URL %1 does not contain {searchTerms}."
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">The string to find in the title of an item. Simple wildcard syntax is supported :</p>"
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; color:#000000;\">Matches zero or more of any characters.</p>"
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; color:#000000;\">Sets of characters can be represented in square brackets. Within the character class, like outside, backslash has no special meaning.</p>"
"</td>"
"</tr>"
"</table>"
"\n"
"<p style=\" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; color:#000000;\">For example the *.torrent will match any item which ends in .torrent. </p>"
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-weight:600;\">Attention: </span>You should not disable this when the webinterface is accessible from the internet. It will allow anybody access to it.</p>"
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">If you are behind a router and you want to access the webinterface from somewhere on the Internet you need to forward the correct port.</p>"
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">This checkbox will ensure that the UPnP plugin automatically forwards the port. The UPnP plugin needs to be loaded for this to work.</p>"
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">this list allows you to open bookmarked pages</p>"
"\n"
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-weight:600;\">Ctrl</span> to open in a new page</p>"
msgctxt "Action allowing the user to change his document password"
msgid "Change password..."
msgstr ""
#. +> trunk5
#: plugins/generic/skg_file/skgfileplugin.cpp:125
#: plugins/generic/skg_file/skgfileplugin.cpp:143
#, kde-format
msgctxt "Splash screen message"
msgid "Opening file %1..."
msgstr ""
#. +> trunk5
#: plugins/generic/skg_file/skgfileplugin.cpp:228
#, kde-format
msgctxt "Noun, a file as in a text file"
msgid "File"
msgstr ""
#. +> trunk5
#: plugins/generic/skg_file/skgfileplugin.cpp:238
#, kde-format
msgctxt "File Management, as in Save File, Save As..."
msgid "File management"
msgstr ""
#. +> trunk5
#: plugins/generic/skg_file/skgfileplugin.cpp:244
#, kde-format
msgctxt "Description of a tip"
msgid "<p>... the last opened file can be <a href=\"skg://tab_configure?page=File plugin\">open automatically</a> when the application is launched.</p>"
msgstr ""
#. +> trunk5
#: plugins/generic/skg_file/skgfileplugin.cpp:245
#, kde-format
msgctxt "Description of a tip"
msgid "<p>... you can secure your document with a <a href=\"skg://file_change_password\">password</a>.</p>"
msgstr ""
#. +> trunk5
#: plugins/generic/skg_file/skgfileplugin.cpp:270
#, kde-format
msgctxt "Successful message after creating a document"
msgid "Document successfully created."
msgstr ""
#. +> trunk5
#: plugins/generic/skg_file/skgfileplugin.cpp:272
#, kde-format
msgctxt "Error message: Could not create a document"
msgid "Document creation failed."
msgstr ""
#. +> trunk5
#: plugins/generic/skg_file/skgfileplugin.cpp:296
#, kde-format
msgctxt "Successfully saved a file"
msgid "File successfully saved."
msgstr ""
#. +> trunk5
#: plugins/generic/skg_file/skgfileplugin.cpp:298
#, kde-format
msgctxt "Error message: Could not save a file"
msgid "Cannot save file"
msgstr ""
#. +> trunk5
#: plugins/generic/skg_file/skgfileplugin.cpp:313
#, kde-format
msgctxt "Associated with the file extension : for example, .csv --> CSV document"
msgid "%1 document"
msgstr ""
#. +> trunk5
#: plugins/generic/skg_file/skgfileplugin.cpp:328
#, kde-format
msgctxt "Successfully saved a file"
msgid "File '%1' saved."
msgstr ""
#. +> trunk5
#: plugins/generic/skg_file/skgfileplugin.cpp:340
#, kde-format
msgctxt "Error message: Could not save a file"
msgid "Failed to save '%1'."
msgstr ""
#. +> trunk5
#: plugins/generic/skg_file/skgfileplugin.cpp:374
#, kde-format
msgctxt "Panel title"
msgid "Open file"
msgstr ""
#. +> trunk5
#: plugins/generic/skg_file/skgfileplugin.cpp:376
#, kde-format
msgctxt "File format for open dialog panel"
msgid "%1 document"
msgstr ""
#. +> trunk5
#: plugins/generic/skg_file/skgfileplugin.cpp:383
#, kde-format
msgctxt "Warning message"
msgid "Your document has been restored from its temporary file. You can decide to reopen the original document."
msgctxt "The user did not provide the correct password"
msgid "<b>Wrong password.</b>\n"
msgstr ""
#. +> trunk5
#: plugins/generic/skg_file/skgfileplugin.cpp:485
#, kde-format
msgctxt "Successfully opened a file"
msgid "File '%1' opened."
msgstr ""
#. +> trunk5
#: plugins/generic/skg_file/skgfileplugin.cpp:521
#, kde-format
msgctxt "Error message: Could not open a file"
msgid "Failed to open '%1'."
msgstr ""
#. +> trunk5
#: plugins/generic/skg_file/skgfileplugin.cpp:529
#, kde-format
msgctxt "Noun"
msgid "Try a recovery"
msgstr ""
#. +> trunk5
#: plugins/generic/skg_file/skgfileplugin.cpp:552
#, kde-format
msgctxt "Positive message"
msgid ""
"Your document has been recovered here: %1\n"
"Take care the recovery could be not perfect"
msgstr ""
#. +> trunk5
#: plugins/generic/skg_file/skgfileplugin.cpp:553
#, kde-format
msgctxt "Noun"
msgid "Open the recovered file"
msgstr ""
#. +> trunk5
#: plugins/generic/skg_file/skgfileplugin.cpp:572
#, kde-format
msgid "Take care, if you lose your <b>password</b> then it will be <u><b>impossible</b></u> to open your document. Warning, this action can not be undone excepted by changing the password again."
msgstr ""
#. +> trunk5
#: plugins/generic/skg_file/skgfileplugin.cpp:574
#, kde-format
msgctxt "Successfully changed the document password"
msgid "Changing password was canceled."
msgstr ""
#. +> trunk5
#: plugins/generic/skg_file/skgfileplugin.cpp:580
#, kde-format
msgctxt "Successfully changed the document password"
msgid "Password changed."
msgstr ""
#. +> trunk5
#: plugins/generic/skg_file/skgfileplugin.cpp:582
#, kde-format
msgctxt "Error message: Could not change the document password"
msgid "Failed to change password."
msgstr ""
#. +> trunk5
#: plugins/generic/skg_file/skgfileplugin.cpp:602
#, kde-format
msgctxt "Advice to the user that he should backup his document"
msgid "Backup your document"
msgstr ""
#. +> trunk5
#: plugins/generic/skg_file/skgfileplugin.cpp:603
#, kde-format
msgctxt "Explain the user that he should backup his document"
msgid "Do not forget to backup your document on another device."
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">The number of undoable actions to keep in the history. If you want to keep <span style=\" font-weight:600;\">all</span> actions in the history, set this to <span style=\" font-weight:600;\">-1</span>, but be warned that the file size will increase steeply.</p>"
msgid "Columns date and amount not found. Set import parameters in settings (Configure Skrooge... / Import/Export / CSV / Edit regular expressions...)."
msgctxt "Information on an account's status : Balance is the current amount of money on the account, Checked is the amount of money on your last bank's statement, To be Checked is the differences between these two values"
msgid "Today balance : %1 Balance : %2 Checked : %3 To be Checked : %4"
msgctxt "Information on an account's status : Balance is the current amount of money on the account, Checked is the amount of money on your last bank's statement, To be Checked is the differences between these two values"
"</style></head><body style=\" font-family:'Bitstream Vera Sans'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Amount of the operation.</p>"
"\n"
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">You can enter expressions here, such as <span style=\" font-style:italic;\">3+4*2</span>, skrooge will compute the result (<span style=\" font-style:italic;\">11</span>)</p>"
msgctxt "List of categories.It is not needed to translate each item. You can set the list you want. ';' must be used to separate categories. ' > ' must be used to separate categorie and sub caterogie (no limit of level)."
msgid "Alimony;Auto;Auto > Fuel;Auto > Insurance;Auto > Lease;Auto > Loan;Auto > Registration;Auto > Service;Bank Charges;Bank Charges > Interest Paid;Bank Charges > Service Charge;Bills;Bills > Electricity;Bills > Fuel Oil;Bills > Local Taxes;Bills > Mortgage;Bills > Natural Gas;Bills > Rent;Bills > TV;Bills > Telephone;Bills > Water & Sewage;Bonus;Business;Business > Auto;Business > Capital Goods;Business > Legal Expenses;Business > Office Rent;Business > Office Supplies;Business > Other;Business > Revenue;Business > Taxes;Business > Travel;Business > Utilities;Business > Wages & Salary;Car;Car > Fuel;Car > Insurance;Car > Lease;Car > Loan;Car > Registration;Car > Service;Cash Withdrawal;Charity;Charity > Donations;Child Care;Child Support;Clothing;Disability;Div Income;Div Income > Ord dividend;Div Income > Stock dividend;Education;Education > Board;Education > Books;Education > Fees;Education > Loans;Education > Tuition;Employment;Employment > Benefits;Employment > Foreign;Employment > Lump sums;Employment > Other employ;Employment > Salary & wages;Food;Food > Dining Out;Food > Groceries;Gardening;Gift Received;Gifts;Healthcare;Healthcare > Dental;Healthcare > Doctor;Healthcare > Hospital;Healthcare > Optician;Healthcare > Prescriptions;Holidays;Holidays > Accomodation;Holidays > Travel;Household;Household > Furnishings;Household > Repairs;Insurance;Insurance > Auto;Insurance > Disability;Insurance > Home and Contents;Insurance > Life;Insurance > Medical;Int Inc;Int Inc > Bank Interest;Int Inc > Gross;Int Inc > Net;Int Inc > Other savings;Invest. income;Invest. income > 1st option;Invest. income > Dividend;Invest. income > Foreign;Invest. income > Other savings;Invest. income > Other trusts;Invest. income > Other trusts#Capital;Invest. income > Other trusts#Dist. rec'd;Invest. income > Other trusts#Estate;Investment Income;Investment Income > Dividends;Investment Income > Interest;Investment Income > Long-Term Capital Gains;Investment Income > Short-Term Capital Gains;Investment Income > Tax-Exempt Interest;Job Expense;Job Expense > Non-Reimbursed;Job Expense > Reimbursed;Legal Fees;Leisure;Leisure > Books & Magazines;Leisure > Entertaining;Leisure > Films & Video Rentals;Leisure > Hobbies;Leisure > Sporting Events;Leisure > Sports Goods;Leisure > Tapes & CDs;Leisure > Theatre & Concerts etc;Leisure > Toys & Games;Loan;Loan > Loan Interest;Long-Term Capital gains;Mortgage;Mortgage > Interest;Mortgage > PMI;Mortgage > Principle;Motor;Motor > Fuel;Motor > Loan;Motor > Service;Other Expense;Other Expense > Unknown;Other Income;Other Income > Child Support;Other Income > Employee Share Option;Other Income > Gifts Received;Other Income > Loan Principal Received;Other Income > Lottery or Premium Bond Prizes;Other Income > Student loan;Other Income > Tax Refund;Other Income > Unemployment Benefit;Pension;Pension > Employer;Personal Care;Pet Care;Pet Care > Food;Pet Care > Supplies;Pet Care > Vet's Bills;Recreation;Retirement Accounts;Retirement Accounts > 401(k)403(b) Plan Contributions;Retirement Accounts > 529 Plan Contributions;Retirement Accounts > IRA Contributions;Retirement Income;Retirement Income > 401(k);Retirement Income > 401(k) > 403(b) Distributions;Retirement Income > IRA Distributions;Retirement Income > Pensions & Annuities;Retirement Income > State Pension Benefits;Short-Term Capital gains;Social Security Benefits;Taxes;Taxes > AMT;Taxes > Federal Tax;Taxes > Federal Taxes;Taxes > Local Tax;Taxes > Local Taxes;Taxes > Other Invest;Taxes > Other Tax;Taxes > Property Taxes;Taxes > Social Security;Taxes > State Tax;Taxes > State Taxes;Travel;Travel > Accomodations;Travel > Car Rental;Travel > Fares;Utilities;Utilities > Electricity;Utilities > Garbage & Recycling;Utilities > Gas;Utilities > Sewer;Utilities > Telephone;Utilities > Water;Wages & Salary;Wages & Salary > Benefits;Wages & Salary > Bonus;Wages & Salary > Commission;Wages & Salary > Employer Pension Contributions;Wages & Salary > Gross Pay;Wages & Salary > Net Pay;Wages & Salary > Overtime;Wages & Salary > Workman's Comp"
msgid "<p>... if you delete a <a href=\"skg://skrooge_categories_plugin\">category</a>, all operations affected by this category will be associated to its parent category.</p>"
msgid "<p>... skrooge is able to detect <a href=\"skg://tab_configure?page=Skrooge import and export plugin\">automatically</a> transfers after an import.</p>"
msgid "<p>... you can customize your CSV import with regular expressions defined in <a href=\"skg://tab_configure?page=Skrooge import and export plugin\">setting</a> panel.</p>"
msgid "<p>... you can export some accounts or operations just be selecting them before to launch the <a href=\"skg://export\">export_operation</a>.</p>"
msgid "After importing operations, you should review them, make corrections on, for instance, category, payee. Once done, you should mark the imported operation as validated, so that you know the operation has been fully processed."
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"> Must be a string containing following key words separated by <span style=\" font-weight:600;\">|</span>:</p>"
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:9pt;\"> or anything else to import the column as a property.</span></p>"
msgid "<p>... you have to indicate the sign of an <a href=\"skg://skrooge_operation_plugin\">operation</a> only if you want to force it, else it will be determined automatically with the <a href=\"skg://skrooge_category_plugin\">category</a>.</p>"
msgid "Your account '%1' contains more than one operation with number %2.The operation number should be unique (check number, transaction reference...)"
msgid "Do not forget to reconciliate your accounts. By doing so, you acknowledge that your bank has indeed processed these operations on your account. This is how you enforce compliance with your bank's statements. See online help for more details"
msgid "When a transfer is created and when only one part of this transfer is removed, the second part is in a group of only one operation. This makes no sense."
"</style></head><body style=\" font-family:'Bitstream Vera Sans'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">A <span style=\" font-style:italic;\">Tracker</span> is a way to group some operations together. For example, you may use it to follow refunds.</p>"
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">You will find more information on this in the documentation in the chapter \"Trackers\".</p>"
msgid "<p>... <a href=\"skg://skrooge_unit_plugin\">units</a> can be downloaded <a href=\"skg://tab_configure?page=Skrooge Unit Plugin\">automatically</a> when a document is opened.</p>"
msgid "To avoid misunderstanding and conflicts between units at conversion time, you should define a primary currency. It is the currency against which all other will be converted"
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-family:'DejaVu Sans'; font-size:10pt;\">You can add \" /\" if you are not able to download the expected quote but you are able to download the inverse.</span></p>"
"\n"
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-family:'DejaVu Sans'; font-size:10pt; text-decoration: underline;\">Example:</span><span style=\" font-family:'DejaVu Sans'; font-size:10pt;\"> EURUSD=X is the symbol to download EURO in USD.</span></p>"
"\n"
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-family:'DejaVu Sans'; font-size:10pt;\">If you want USD in EURO, you have to create a unit USD with \"EURUSD=X /\" as the Internet code.</span></p>"
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-family:'DejaVu Sans'; font-size:10pt;\">This field can also be set with a yearly rate. The values are computed by clicking on download.<br />"
"Example:</span></p>"
"\n"
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-family:'DejaVu Sans'; font-size:10pt;\">=-25 means -25% per year.</span></p>"
"<p>Searching is case-insensitive. So table, Table, and TABLE are all the same.<br/>"
"If you just put a word or series of words in the search box, the application will filter the table to keep all lines having these words (logical operator AND). <br/>"
"If you want to add (logical operator OR) some lines, you must prefix your word by '+'.<br/>"
"If you want to remove (logical operator NOT) some lines, you must prefix your word by '-'.<br/>"
"If you want to search only on some columns, you must prefix your word by the beginning of column name like: col1:word.<br/>"
"If you want to search only on one column, you must prefix your word by the column name and a dot like: col1.:word.<br/>"
"If you want to use the character ':' in value, you must specify the column name like this: col1:value:rest.<br/>"
"If you want to search for a phrase or something that contains spaces, you must put it in quotes, like: 'yes, this is a phrase'.</p>"
"<p>You can also use operators '<', '>', '<=', '>=', '=' and '#' (for regular expression).</p>"
msgid "Reference unit of a unit cannot be itself."
msgstr ""
#. +> trunk5
#: skgbankmodeler/skgunitobject.cpp:1932
#, kde-format
msgctxt "Progression step"
msgid "Simplify unit"
msgstr ""
#. +> trunk5
#: skgbankmodeler/skgunitobject.cpp:1935
#, kde-format
msgctxt "Progression step"
msgid "Analyze unit"
msgstr ""
#. +> trunk5
#: skgbankmodeler/skgunitobject.cpp:1974
#, kde-format
msgctxt "Progression step"
msgid "Remove useless values"
msgstr ""
#. +> trunk5
#: skgbankmodeler/skgunitobject.cpp:2117
#, kde-format
msgctxt "Error message"
msgid "Invalid ratio. Ratio must be greater than 0."
msgstr ""
#. +> trunk5
#: skgbankmodeler/skgunitobject.cpp:2161
#, kde-format
msgctxt "Description test for a text file used to define a source of download"
msgid "The URL or the SCRIPT of the source. %1 will be replaced by the internet code of the unit"
msgstr ""
#. +> trunk5
#: skgbankmodeler/skgunitobject.cpp:2163
#, kde-format
msgctxt "Description test for a text file used to define a source of download"
msgid "%1 will be replaced by the current day in format yyyy-MM-dd"
msgstr ""
#. +> trunk5
#: skgbankmodeler/skgunitobject.cpp:2165
#, kde-format
msgctxt "Description test for a text file used to define a source of download"
msgid "%1 will be replaced by the previous date in format yyyy-MM-dd"
msgstr ""
#. +> trunk5
#: skgbankmodeler/skgunitobject.cpp:2172
#, kde-format
msgctxt "Description test for a text file used to define a source of download"
msgid "The mode (HTML or CSV or CSVR). In HTML mode, only one value will be extracted from downloaded page. In CSV mode, a value per line will be extracted. CSVR means CSV in reverse mode."
msgstr ""
#. +> trunk5
#: skgbankmodeler/skgunitobject.cpp:2176
#, kde-format
msgctxt "Description test for a text file used to define a source of download"
msgid "The regular expression for the price (see %1)"
msgstr ""
#. +> trunk5
#: skgbankmodeler/skgunitobject.cpp:2180
#, kde-format
msgctxt "Description test for a text file used to define a source of download"
msgid "The regular expression for the date (see %1)"
msgstr ""
#. +> trunk5
#: skgbankmodeler/skgunitobject.cpp:2184
#, kde-format
msgctxt "Description test for a text file used to define a source of download"
msgid "The format of the date (see %1) or \"UNIX\" for unix time"
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">this list allows you to open new pages</p>"
"\n"
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-weight:600;\">Ctrl</span> to open in a new page</p>"
"This document is protected by a password but the database is still in SQLite mode.\n"
"Do you know that the SQLCipher mode is more secured because even the temporary file is encrypted?"
msgstr ""
#. +> trunk5
#: skgbasemodeler/skgdocument.cpp:1539
#, kde-format
msgctxt "Information message"
msgid "A security hole has been detected and corrected on this version of the application. We strongly encourage you to change your password."
msgstr ""
#. +> trunk5
#: skgbasemodeler/skgdocument.cpp:1545
#, kde-format
msgctxt "Popup message"
msgid "The migration failed but the document has been loaded without error because debug mode is activated"
msgstr ""
#. +> trunk5
#: skgbasemodeler/skgdocument.cpp:1549
#, kde-format
msgctxt "The document has been upgraded to the latest Skrooge version format"
msgid "The document has been migrated"
msgstr ""
#. +> trunk5
#: skgbasemodeler/skgdocument.cpp:1575
#, kde-format
msgctxt "Error message"
msgid "This application can not run correctly because the %3 version of the system (%1) is not aligned with the %4 version embedded in Qt (%2). You should rebuild Qt with the option -system-sqlite."
msgstr ""
#. +> trunk5
#: skgbasemodeler/skgdocument.cpp:1621
#, kde-format
msgctxt "Error message: Can not save a file if it has no name yet"
msgid "Save not authorized because the file name is not yet defined"
msgstr ""
#. +> trunk5
#: skgbasemodeler/skgdocument.cpp:1639
#, kde-format
msgctxt "Cannot save the file while the application is still performing an SQL transaction"
msgid "Save is forbidden if a transaction is still opened"
msgstr ""
#. +> trunk5
#: skgbasemodeler/skgdocument.cpp:1659
#, kde-format
msgctxt "There is already a file with the same name"
msgid "File '%1' already exist"
msgstr ""
#. +> trunk5
#: skgbasemodeler/skgdocument.cpp:1673
#, kde-format
msgctxt "Error message: Could not create a backup file"
msgid "The application name is inspired by Charles Dicken's tale <i>A Christmas Carol</i>, where the main character, Ebenezer Scrooge, a grumpy old narrow man, gets visited by three ghosts who change the way he sees the world, in a good way."
msgid "Mycroft by default is powered by a cloud-based speech to text service. Mycroft gives you the ability to change speech to text services or use a locally configured one within their settings at home.mycroft.ai. If you agree to the default usage of Mycroft’s speech to text service, please continue. Also remember you can always choose to turn off or mute Mycroft when you do not wish to use it."
msgstr ""
#. +> trunk5
#: contents/ui/Disclaimer.qml:83
#, kde-format
msgid "To start using Mycroft toggle the switch in the upper right corner!"
msgstr ""
#. +> trunk5
#: contents/ui/DisclaimerCardDelegate.qml:146
#, kde-format
msgid "Mycroft by default is powered by a cloud-based speech to text service. Mycroft gives you the ability to change speech to text services or use a locally configured one within their settings at home.mycroft.ai."
msgid "<p>The entries are accessible through the submenu <b>Commands</b> in the <b>Tools</b> menu. For faster access it is possible to assign <b>shortcuts</b> in the shortcut configuration page after applying the changes.</p>"
"<p>Automatically start a new line of text when the current line exceeds the length specified by the <b>Wrap words at:</b> option.</p>"
"<p>This option does not wrap existing lines of text - use the <b>Apply Static Word Wrap</b> option in the <b>Tools</b> menu for that purpose.</p>"
"<p>If you want lines to be <i>visually wrapped</i> instead, according to the width of the view, enable <b>Dynamic Word Wrap</b> in the <b>Appearance</b> config page.</p>"
"<p>This string allows to configure Kate's settings for the files selected by this mimetype using Kate variables. Almost any configuration option can be set, such as highlight, indent-mode, encoding, etc.</p>"
"<p>For a full list of known variables, see the manual.</p>"
msgid "The wildcards mask allows to select files by filename. A typical mask uses an asterisk and the file extension, for example <code>*.txt; *.text</code>. The string is a semicolon-separated list of masks."
msgid "The mime type mask allows to select files by mimetype. The string is a semicolon-separated list of mimetypes, for example <code>text/plain; text/english</code>."
msgid "This is a list of available indentation modes. The specified indentation mode will be used for all new documents. Be aware that it is also possible to set the indentation mode with document variables, modes or a .kateconfig file."
msgid "The indentation width is the number of spaces which is used to indent a line. If the option <b>Insert spaces instead of tabulators</b> in the section <b>Editing</b> is disabled, a <b>Tab</b> character is inserted if the indentation is divisible by the tab width."
msgid "If this option is selected, the <b>Backspace</b> key decreases the indentation level if the cursor is located in the leading blank space of a line."
"<p>Tab key action (if no selection exists) <a href=\"If you want <b>Tab</b> to align the current line in the current code block like in emacs, make <b>Tab</b> a shortcut to the action <b>Align</b>.\"><span>More ...</span></a></p>"
msgid "If this option is selected, the <b>Tab</b> key always inserts white space so that the next tab position is reached. If the option <b>Insert spaces instead of tabulators</b> in the section <b>Editing</b> is enabled, spaces are inserted; otherwise, a single tabulator is inserted."
msgid "If this option is selected, the <b>Tab</b> key always indents the current line by the number of character positions specified in <b>Indentation width</b>."
"If this option is selected, the <b>Tab</b> key either indents the current line or advances to the next tab position."
"<p> If the insertion point is at or before the first non-space character in the line, or if there is a selection, the current line is indented by the number of character positions specified in <b>Indentation width</b>."
"<p> If the insertion point is located after the first non-space character in the line and there is no selection, white space is inserted so that the next tab position is reached: if the option <b>Insert spaces instead of tabulators</b> in the section <b>Editing</b> is enabled, spaces are inserted; otherwise, a single tabulator is inserted."
msgid "When selected, pressing the home key will cause the cursor to skip whitespace and go to the start of a line's text. The same applies for the end key."
msgid "When selected, composed characters are removed with their diacritics instead of only removing the base character. This is useful for Indic locales."
msgid "if neither the encoding chosen as standard above, nor the encoding specified in the open/save dialog, nor the encoding specified on command line match the content of the file, this detection will be run."
msgid "This defines the fallback encoding to try for opening files if neither the encoding chosen as standard above, nor the encoding specified in the open/save dialog, nor the encoding specified on command line match the content of the file. Before this is used, an attempt will be made to determine the encoding to use by looking for a byte order mark at start of file: if one is found, the right Unicode encoding will be chosen; otherwise encoding detection will run, if both fail the fallback encoding will be tried."
msgid "The byte order mark is a special sequence at the beginning of Unicode encoded documents. It helps editors to open text documents with the correct Unicode encoding. The byte order mark is not visible in the displayed document."
"<p>Enables the start of dynamically wrapped lines to be aligned vertically to the indentation level of the first line. This can help to make code and markup more readable.</p>"
"<p>Additionally, this allows you to set a maximum width of the screen, as a percentage, after which dynamically wrapped lines will no longer be vertically aligned. For example, at 50%, lines whose indentation levels are deeper than 50% of the width of the screen will not have vertical alignment applied to subsequent wrapped lines.</p>"
"The file %1 could not be loaded, as it was not possible to read from it.\n"
"\n"
"Check if you have read access to this file."
msgstr ""
#. +> trunk5
#: document/katedocument.cpp:2296
#, kde-format
msgid ""
"The file %1 was opened with %2 encoding but contained invalid characters.<br />"
"It is set to read-only mode, as saving might destroy its content.<br />"
"Either reopen the file with the correct encoding chosen or enable the read-write mode again in the tools menu to be able to edit it."
msgstr ""
#. +> trunk5
#: document/katedocument.cpp:2306
#, kde-format
msgid "The file %1 was opened with %2 encoding but contained invalid characters. It is set to read-only mode, as saving might destroy its content. Either reopen the file with the correct encoding chosen or enable the read-write mode again in the tools menu to be able to edit it."
msgstr ""
#. +> trunk5
#: document/katedocument.cpp:2317
#, kde-format
msgid ""
"The file %1 was opened and contained lines longer than the configured Line Length Limit (%2 characters).<br />"
"The longest of those lines was %3 characters long<br/>"
"Those lines were wrapped and the document is set to read-only mode, as saving will modify its content."
msgstr ""
#. +> trunk5
#: document/katedocument.cpp:2322
#, kde-format
msgid "Temporarily raise limit and reload file"
msgstr ""
#. +> trunk5
#: document/katedocument.cpp:2325
#, kde-format
msgid "Close"
msgstr ""
#. +> trunk5
#: document/katedocument.cpp:2331
#, kde-format
msgid ""
"The file %1 was opened and contained lines longer than the configured Line Length Limit (%2 characters).<br/>"
"The longest of those lines was %3 characters long<br/>"
"Those lines were wrapped and the document is set to read-only mode, as saving will modify its content."
msgstr ""
#. +> trunk5
#: document/katedocument.cpp:2354
#, kde-format
msgid "Do you really want to save this unmodified file? You could overwrite changed data in the file on disk."
msgid "The selected encoding cannot encode every Unicode character in this document. Do you really want to save it? There could be some data lost."
msgstr ""
#. +> trunk5
#: document/katedocument.cpp:2412
#, kde-format
msgid ""
"The document could not be saved, as it was not possible to write to %1.\n"
"Check that you have write access to this file or that enough disk space is available.\n"
"The original file may be lost or damaged. Don't quit the application until the file is successfully written."
msgstr ""
#. +> trunk5
#: document/katedocument.cpp:2536
#, kde-format
msgid "For file %1 no backup copy could be created before saving. If an error occurs while saving, you might lose the data of this file. A reason could be that the media you write to is full or the directory of the file is read-only for you."
msgstr ""
#. +> trunk5
#: document/katedocument.cpp:2539
#, kde-format
msgid "Failed to create backup copy."
msgstr ""
#. +> trunk5
#: document/katedocument.cpp:2540
#, kde-format
msgid "Try to Save Nevertheless"
msgstr ""
#. +> trunk5
#: document/katedocument.cpp:2662
#, kde-format
msgid "Do you really want to continue to close this file? Data loss may occur."
msgid "Select the color scheme to use for the print."
msgstr ""
#. +> trunk5
#: printing/printconfigwidgets.cpp:565
#, kde-format
msgid ""
"<p>If enabled, the background color of the editor will be used.</p>"
"<p>This may be useful if your color scheme is designed for a dark background.</p>"
msgstr ""
#. +> trunk5
#: printing/printconfigwidgets.cpp:568
#, kde-format
msgid "<p>If enabled, a box as defined in the properties below will be drawn around the contents of each page. The Header and Footer will be separated from the contents with a line as well.</p>"
msgid "Use default color from the KDE color scheme"
msgstr ""
#. +> trunk5
#: schema/kateschemaconfig.cpp:59
#, kde-format
msgid "Use KDE Color Scheme"
msgstr ""
#. +> trunk5
#: schema/kateschemaconfig.cpp:86
#, kde-format
msgid "Editor Background Colors"
msgstr ""
#. +> trunk5
#: schema/kateschemaconfig.cpp:88
#, kde-format
msgid "Text Area"
msgstr ""
#. +> trunk5
#: schema/kateschemaconfig.cpp:90
#, kde-format
msgid "<p>Sets the background color of the editing area.</p>"
msgstr ""
#. +> trunk5
#: schema/kateschemaconfig.cpp:94
#, kde-format
msgid "Selected Text"
msgstr ""
#. +> trunk5
#: schema/kateschemaconfig.cpp:96
#, kde-format
msgid ""
"<p>Sets the background color of the selection.</p>"
"<p>To set the text color for selected text, use the "<b>Configure Highlighting</b>" dialog.</p>"
msgstr ""
#. +> trunk5
#: schema/kateschemaconfig.cpp:100
#, kde-format
msgid "Current Line"
msgstr ""
#. +> trunk5
#: schema/kateschemaconfig.cpp:102
#, kde-format
msgid "<p>Sets the background color of the currently active line, which means the line where your cursor is positioned.</p>"
msgstr ""
#. +> trunk5
#: schema/kateschemaconfig.cpp:106
#, kde-format
msgid "Search Highlight"
msgstr ""
#. +> trunk5
#: schema/kateschemaconfig.cpp:108
#, kde-format
msgid "<p>Sets the background color of search results.</p>"
msgstr ""
#. +> trunk5
#: schema/kateschemaconfig.cpp:112
#, kde-format
msgid "Replace Highlight"
msgstr ""
#. +> trunk5
#: schema/kateschemaconfig.cpp:114
#, kde-format
msgid "<p>Sets the background color of replaced text.</p>"
msgstr ""
#. +> trunk5
#: schema/kateschemaconfig.cpp:121
#, kde-format
msgid "Icon Border"
msgstr ""
#. +> trunk5
#: schema/kateschemaconfig.cpp:123
#, kde-format
msgid "Background Area"
msgstr ""
#. +> trunk5
#: schema/kateschemaconfig.cpp:125
#, kde-format
msgid "<p>Sets the background color of the icon border.</p>"
msgstr ""
#. +> trunk5
#: schema/kateschemaconfig.cpp:129
#, kde-format
msgid "Line Numbers"
msgstr ""
#. +> trunk5
#: schema/kateschemaconfig.cpp:131
#, kde-format
msgid "<p>This color will be used to draw the line numbers (if enabled).</p>"
msgstr ""
#. +> trunk5
#: schema/kateschemaconfig.cpp:135
#, kde-format
msgid "Current Line Number"
msgstr ""
#. +> trunk5
#: schema/kateschemaconfig.cpp:137
#, kde-format
msgid "<p>This color will be used to draw the number of the current line (if enabled).</p>"
msgstr ""
#. +> trunk5
#: schema/kateschemaconfig.cpp:141
#, kde-format
msgid "Separator"
msgstr ""
#. +> trunk5
#: schema/kateschemaconfig.cpp:143
#, kde-format
msgid "<p>This color will be used to draw the line between line numbers and the icon borders, if both are enabled.</p>"
msgstr ""
#. +> trunk5
#: schema/kateschemaconfig.cpp:147
#, kde-format
msgid "Word Wrap Marker"
msgstr ""
#. +> trunk5
#: schema/kateschemaconfig.cpp:149
#, kde-format
msgid ""
"<p>Sets the color of Word Wrap-related markers:</p>"
"<dl>"
"<dt>Static Word Wrap</dt>"
"<dd>A vertical line which shows the column where text is going to be wrapped</dd>"
"<dt>Dynamic Word Wrap</dt>"
"<dd>An arrow shown to the left of visually-wrapped lines</dd>"
"</dl>"
msgstr ""
#. +> trunk5
#: schema/kateschemaconfig.cpp:153
#, kde-format
msgid "Code Folding"
msgstr ""
#. +> trunk5
#: schema/kateschemaconfig.cpp:155
#, kde-format
msgid "<p>Sets the color of the code folding bar.</p>"
msgstr ""
#. +> trunk5
#: schema/kateschemaconfig.cpp:159
#, kde-format
msgid "Modified Lines"
msgstr ""
#. +> trunk5
#: schema/kateschemaconfig.cpp:161
#, kde-format
msgid "<p>Sets the color of the line modification marker for modified lines.</p>"
msgstr ""
#. +> trunk5
#: schema/kateschemaconfig.cpp:165
#, kde-format
msgid "Saved Lines"
msgstr ""
#. +> trunk5
#: schema/kateschemaconfig.cpp:167
#, kde-format
msgid "<p>Sets the color of the line modification marker for saved lines.</p>"
msgstr ""
#. +> trunk5
#: schema/kateschemaconfig.cpp:174
#, kde-format
msgid "Text Decorations"
msgstr ""
#. +> trunk5
#: schema/kateschemaconfig.cpp:176
#, kde-format
msgid "Spelling Mistake Line"
msgstr ""
#. +> trunk5
#: schema/kateschemaconfig.cpp:178
#, kde-format
msgid "<p>Sets the color of the line that is used to indicate spelling mistakes.</p>"
msgstr ""
#. +> trunk5
#: schema/kateschemaconfig.cpp:182
#, kde-format
msgid "Tab and Space Markers"
msgstr ""
#. +> trunk5
#: schema/kateschemaconfig.cpp:184
#, kde-format
msgid "<p>Sets the color of the tabulator marks.</p>"
msgstr ""
#. +> trunk5
#: schema/kateschemaconfig.cpp:188
#, kde-format
msgid "Indentation Line"
msgstr ""
#. +> trunk5
#: schema/kateschemaconfig.cpp:190
#, kde-format
msgid "<p>Sets the color of the vertical indentation lines.</p>"
msgstr ""
#. +> trunk5
#: schema/kateschemaconfig.cpp:194
#, kde-format
msgid "Bracket Highlight"
msgstr ""
#. +> trunk5
#: schema/kateschemaconfig.cpp:196
#, kde-format
msgid "<p>Sets the bracket matching color. This means, if you place the cursor e.g. at a <b>(</b>, the matching <b>)</b> will be highlighted with this color.</p>"
"<p><b>Note</b>: The marker color is displayed lightly because of transparency.</p>"
msgstr ""
#. +> trunk5
#: schema/kateschemaconfig.cpp:226
#, kde-format
msgid "Text Templates & Snippets"
msgstr ""
#. +> trunk5
#: schema/kateschemaconfig.cpp:230
#, kde-format
msgid "Background"
msgstr ""
#. +> trunk5
#: schema/kateschemaconfig.cpp:235
#, kde-format
msgid "Editable Placeholder"
msgstr ""
#. +> trunk5
#: schema/kateschemaconfig.cpp:240
#, kde-format
msgid "Focused Editable Placeholder"
msgstr ""
#. +> trunk5
#: schema/kateschemaconfig.cpp:245
#, kde-format
msgid "Not Editable Placeholder"
msgstr ""
#. +> trunk5
#: schema/kateschemaconfig.cpp:470
#, kde-format
msgid ""
"<p>This list displays the default styles for the current schema and offers the means to edit them. The style name reflects the current style settings.</p>"
"<p>To edit the colors, click the colored squares, or select the color to edit from the popup menu.</p>"
"<p>You can unset the Background and Selected Background colors from the popup menu when appropriate.</p>"
"<p>This list displays the contexts of the current syntax highlight mode and offers the means to edit them. The context name reflects the current style settings.</p>"
"<p>To edit using the keyboard, press <strong><SPACE></strong> and choose a property from the popup menu.</p>"
"<p>To edit the colors, click the colored squares, or select the color to edit from the popup menu.</p>"
"<p>You can unset the Background and Selected Background colors from the context menu when appropriate.</p>"
"<p>This word was considered to be an \"unknown word\" because it does not match any entry in the dictionary currently in use. It may also be a word in a foreign language.</p>"
"\n"
"<p>If the word is not misspelled, you may add it to the dictionary by clicking <b>Add to Dictionary</b>. If you do not want to add the unknown word to the dictionary, but you want to leave it unchanged, click <b>Ignore</b> or <b>Ignore All</b>.</p>"
"\n"
"<p>However, if the word is misspelled, you can try to find the correct replacement in the list below. If you cannot find a replacement there, you may type it in the text box below, and click <b>Replace</b> or <b>Replace All</b>.</p>"
"<p>The unknown word was detected and considered unknown because it is not included in the dictionary.<br>"
"\n"
"Click here if you consider the unknown word not to be misspelled, and you want to avoid wrongly detecting it again in the future. If you want to let it remain as is, but not add it to the dictionary, then click <b>Ignore</b> or <b>Ignore All</b> instead.</p>"
"<p>If the unknown word is misspelled, you should type the correction for your misspelled word here or select it from the list below.</p>"
"\n"
"<p>You can then click <b>Replace</b> if you want to correct only this occurrence of the word or <b>Replace All</b> if you want to correct all occurrences.</p>"
"<p>Click here to let this occurrence of the unknown word remain as is.</p>"
"\n"
"<p>This action is useful when the word is a name, an acronym, a foreign word or any other unknown word that you want to use but not add to the dictionary.</p>"
"<p>Click here to let all occurrences of the unknown word remain as they are.</p>"
"\n"
"<p>This action is useful when the word is a name, an acronym, a foreign word or any other unknown word that you want to use but not add to the dictionary.</p>"
"<p>Indents the selected lines or the current line</p>"
msgstr ""
#. +> trunk5
#: utils/katecmds.cpp:69
#, kde-format
msgid ""
"<p>unindent</p>"
"<p>Unindents the selected lines or current line.</p>"
msgstr ""
#. +> trunk5
#: utils/katecmds.cpp:73
#, kde-format
msgid ""
"<p>cleanindent</p>"
"<p>Cleans up the indentation of the selected lines or current line according to the indentation settings in the document. </p>"
msgstr ""
#. +> trunk5
#: utils/katecmds.cpp:77
#, kde-format
msgid ""
"<p>comment</p>"
"<p>Inserts comment markers to make the selection or selected lines or current line a comment according to the text format as defined by the syntax highlight definition for the document.</p>"
msgstr ""
#. +> trunk5
#: utils/katecmds.cpp:81
#, kde-format
msgid ""
"<p>uncomment</p>"
"<p>Removes comment markers from the selection or selected lines or current line according to the text format as defined by the syntax highlight definition for the document.</p>"
msgstr ""
#. +> trunk5
#: utils/katecmds.cpp:85
#, kde-format
msgid ""
"<p>goto <b>line number</b></p>"
"<p>This command navigates to the specified line number.</p>"
msgstr ""
#. +> trunk5
#: utils/katecmds.cpp:89
#, kde-format
msgid ""
"<p>set-indent-pasted-text <b>enable</b></p>"
"<p>If enabled, indentation of text pasted from the clipboard is adjusted using the current indenter.</p>"
"<p>Possible true values: 1 on true<br/>"
"possible false values: 0 off false</p>"
msgstr ""
#. +> trunk5
#: utils/katecmds.cpp:95
#, kde-format
msgid "Deletes the current line."
msgstr ""
#. +> trunk5
#: utils/katecmds.cpp:98
#, kde-format
msgid ""
"<p>set-tab-width <b>width</b></p>"
"<p>Sets the tab width to the number <b>width</b></p>"
msgstr ""
#. +> trunk5
#: utils/katecmds.cpp:102
#, kde-format
msgid ""
"<p>set-replace-tab <b>enable</b></p>"
"<p>If enabled, tabs are replaced with spaces as you type.</p>"
"<p>Possible true values: 1 on true<br/>"
"possible false values: 0 off false</p>"
msgstr ""
#. +> trunk5
#: utils/katecmds.cpp:108
#, kde-format
msgid ""
"<p>set-show-tabs <b>enable</b></p>"
"<p>If enabled, TAB characters and trailing whitespace will be visualized by a small dot.</p>"
"<p>Possible true values: 1 on true<br/>"
"possible false values: 0 off false</p>"
msgstr ""
#. +> trunk5
#: utils/katecmds.cpp:114
#, kde-format
msgid ""
"<p>set-remove-trailing-spaces <b>mode</b></p>"
"<p>Removes the trailing spaces in the document depending on the <b>mode</b>.</p>"
"<p>Possible values:"
"<ul>"
"<li><b>none</b>: never remove trailing spaces.</li>"
"<li><b>modified</b>: remove trailing spaces only of modified lines.</li>"
"<li><b>all</b>: remove trailing spaces in the entire document.</li>"
"</ul>"
"</p>"
msgstr ""
#. +> trunk5
#: utils/katecmds.cpp:124
#, kde-format
msgid ""
"<p>set-indent-width <b>width</b></p>"
"<p>Sets the indentation width to the number <b>width</b>. Used only if you are indenting with spaces.</p>"
msgstr ""
#. +> trunk5
#: utils/katecmds.cpp:128
#, kde-format
msgid ""
"<p>set-indent-mode <b>mode</b></p>"
"<p>The mode parameter is a value as seen in the Tools - Indentation menu</p>"
msgstr ""
#. +> trunk5
#: utils/katecmds.cpp:132
#, kde-format
msgid ""
"<p>set-auto-indent <b>enable</b></p>"
"<p>Enable or disable autoindentation.</p>"
"<p>possible true values: 1 on true<br/>"
"possible false values: 0 off false</p>"
msgstr ""
#. +> trunk5
#: utils/katecmds.cpp:138
#, kde-format
msgid ""
"<p>set-line-numbers <b>enable</b></p>"
"<p>Sets the visibility of the line numbers pane.</p>"
"<p> possible true values: 1 on true<br/>"
"possible false values: 0 off false</p>"
msgstr ""
#. +> trunk5
#: utils/katecmds.cpp:144
#, kde-format
msgid ""
"<p>set-folding-markers <b>enable</b></p>"
"<p>Sets the visibility of the folding markers pane.</p>"
"<p> possible true values: 1 on true<br/>"
"possible false values: 0 off false</p>"
msgstr ""
#. +> trunk5
#: utils/katecmds.cpp:150
#, kde-format
msgid ""
"<p>set-icon-border <b>enable</b></p>"
"<p>Sets the visibility of the icon border.</p>"
"<p> possible true values: 1 on true<br/>"
"possible false values: 0 off false</p>"
msgstr ""
#. +> trunk5
#: utils/katecmds.cpp:156
#, kde-format
msgid ""
"<p>set-word-wrap <b>enable</b></p>"
"<p>Enables dynamic word wrap according to <b>enable</b></p>"
"<p> possible true values: 1 on true<br/>"
"possible false values: 0 off false</p>"
msgstr ""
#. +> trunk5
#: utils/katecmds.cpp:162
#, kde-format
msgid ""
"<p>set-word-wrap-column <b>width</b></p>"
"<p>Sets the line width for hard wrapping to <b>width</b>. This is used if you are having your text wrapped automatically.</p>"
msgstr ""
#. +> trunk5
#: utils/katecmds.cpp:166
#, kde-format
msgid ""
"<p>set-replace-tabs-save <b>enable</b></p>"
"<p>When enabled, tabs will be replaced with whitespace whenever the document is saved.</p>"
"<p> possible true values: 1 on true<br/>"
"possible false values: 0 off false</p>"
msgstr ""
#. +> trunk5
#: utils/katecmds.cpp:172
#, kde-format
msgid ""
"<p>set-highlight <b>highlight</b></p>"
"<p>Sets the syntax highlighting system for the document. The argument must be a valid highlight name, as seen in the Tools → Highlighting menu. This command provides an autocompletion list for its argument.</p>"
msgstr ""
#. +> trunk5
#: utils/katecmds.cpp:176
#, kde-format
msgid ""
"<p>set-mode <b>mode</b></p>"
"<p>Sets the mode as seen in Tools - Mode</p>"
msgstr ""
#. +> trunk5
#: utils/katecmds.cpp:180
#, kde-format
msgid ""
"<p>set-show-indent <b>enable</b></p>"
"<p>If enabled, indentation will be visualized by a vertical dotted line.</p>"
"<p> possible true values: 1 on true<br/>"
"possible false values: 0 off false</p>"
msgstr ""
#. +> trunk5
#: utils/katecmds.cpp:186
#, kde-format
msgid "<p>Open the Print dialog to print the current document.</p>"
msgstr ""
#. +> trunk5
#: utils/katecmds.cpp:301 utils/katecmds.cpp:330
#, kde-format
msgid "Missing argument. Usage: %1 <value>"
msgstr ""
#. +> trunk5
#: utils/katecmds.cpp:314
#, kde-format
msgid "No such highlighting '%1'"
msgstr ""
#. +> trunk5
#: utils/katecmds.cpp:320
#, kde-format
msgid "No such mode '%1'"
msgstr ""
#. +> trunk5
#: utils/katecmds.cpp:335
#, kde-format
msgid "Failed to convert argument '%1' to integer."
msgid "Please specify the wanted indentation width:"
msgstr ""
#. +> trunk5
#: view/katestatusbar.cpp:475
#, kde-format
msgid "Words %1/%2, Chars %3/%4"
msgstr ""
#. +> trunk5
#: view/kateview.cpp:474
#, kde-format
msgid "Cut the selected text and move it to the clipboard"
msgstr ""
#. +> trunk5
#: view/kateview.cpp:477
#, kde-format
msgid "Paste previously copied or cut clipboard contents"
msgstr ""
#. +> trunk5
#: view/kateview.cpp:480
#, kde-format
msgid "Use this command to copy the currently selected text to the system clipboard."
msgstr ""
#. +> trunk5
#: view/kateview.cpp:482
#, kde-format
msgid "Clipboard &History"
msgstr ""
#. +> trunk5
#: view/kateview.cpp:487
#, kde-format
msgid "Save the current document"
msgstr ""
#. +> trunk5
#: view/kateview.cpp:490
#, kde-format
msgid "Revert the most recent editing actions"
msgstr ""
#. +> trunk5
#: view/kateview.cpp:493
#, kde-format
msgid "Revert the most recent undo operation"
msgstr ""
#. +> trunk5
#: view/kateview.cpp:497
#, kde-format
msgid "&Scripts"
msgstr ""
#. +> trunk5
#: view/kateview.cpp:501
#, kde-format
msgid "Apply &Word Wrap"
msgstr ""
#. +> trunk5
#: view/kateview.cpp:502
#, kde-format
msgid ""
"Use this command to wrap all lines of the current document which are longer than the width of the current view, to fit into this view.<br />"
"<br />"
" This is a static word wrap, meaning it is not updated when the view is resized."
msgstr ""
#. +> trunk5
#: view/kateview.cpp:508
#, kde-format
msgid "&Clean Indentation"
msgstr ""
#. +> trunk5
#: view/kateview.cpp:509
#, kde-format
msgid ""
"Use this to clean the indentation of a selected block of text (only tabs/only spaces).<br />"
"<br />"
"You can configure whether tabs should be honored and used or replaced with spaces, in the configuration dialog."
msgstr ""
#. +> trunk5
#: view/kateview.cpp:514
#, kde-format
msgid "&Align"
msgstr ""
#. +> trunk5
#: view/kateview.cpp:515
#, kde-format
msgid "Use this to align the current line or block of text to its proper indent level."
msgstr ""
#. +> trunk5
#: view/kateview.cpp:519
#, kde-format
msgid "C&omment"
msgstr ""
#. +> trunk5
#: view/kateview.cpp:521
#, kde-format
msgid ""
"This command comments out the current line or a selected block of text.<br />"
"<br />"
"The characters for single/multiple line comments are defined within the language's highlighting."
msgstr ""
#. +> trunk5
#: view/kateview.cpp:526
#, kde-format
msgid "Go to previous editing line"
msgstr ""
#. +> trunk5
#: view/kateview.cpp:531
#, kde-format
msgid "Go to next editing line"
msgstr ""
#. +> trunk5
#: view/kateview.cpp:536
#, kde-format
msgid "Unco&mment"
msgstr ""
#. +> trunk5
#: view/kateview.cpp:538
#, kde-format
msgid ""
"This command removes comments from the current line or a selected block of text.<br />"
"<br />"
"The characters for single/multiple line comments are defined within the language's highlighting."
msgstr ""
#. +> trunk5
#: view/kateview.cpp:543
#, kde-format
msgid "Toggle Comment"
msgstr ""
#. +> trunk5
#: view/kateview.cpp:546
#, kde-format
msgid "&Read Only Mode"
msgstr ""
#. +> trunk5
#: view/kateview.cpp:547
#, kde-format
msgid "Lock/unlock the document for writing"
msgstr ""
#. +> trunk5
#: view/kateview.cpp:554
#, kde-format
msgid "Uppercase"
msgstr ""
#. +> trunk5
#: view/kateview.cpp:556
#, kde-format
msgid "Convert the selection to uppercase, or the character to the right of the cursor if no text is selected."
msgstr ""
#. +> trunk5
#: view/kateview.cpp:562
#, kde-format
msgid "Lowercase"
msgstr ""
#. +> trunk5
#: view/kateview.cpp:564
#, kde-format
msgid "Convert the selection to lowercase, or the character to the right of the cursor if no text is selected."
msgstr ""
#. +> trunk5
#: view/kateview.cpp:570
#, kde-format
msgid "Capitalize"
msgstr ""
#. +> trunk5
#: view/kateview.cpp:572
#, kde-format
msgid "Capitalize the selection, or the word under the cursor if no text is selected."
msgstr ""
#. +> trunk5
#: view/kateview.cpp:577
#, kde-format
msgid "Join Lines"
msgstr ""
#. +> trunk5
#: view/kateview.cpp:582
#, kde-format
msgid "Invoke Code Completion"
msgstr ""
#. +> trunk5
#: view/kateview.cpp:583
#, kde-format
msgid "Manually invoke command completion, usually by using a shortcut bound to this action."
msgstr ""
#. +> trunk5
#: view/kateview.cpp:595
#, kde-format
msgid "Print the current document."
msgstr ""
#. +> trunk5
#: view/kateview.cpp:598
#, kde-format
msgid "Show print preview of current document"
msgstr ""
#. +> trunk5
#: view/kateview.cpp:602
#, kde-format
msgid "Reloa&d"
msgstr ""
#. +> trunk5
#: view/kateview.cpp:604
#, kde-format
msgid "Reload the current document from disk."
msgstr ""
#. +> trunk5
#: view/kateview.cpp:608
#, kde-format
msgid "Save the current document to disk, with a name of your choice."
msgstr ""
#. +> trunk5
#: view/kateview.cpp:610
#, kde-format
msgid "Save As with Encoding..."
msgstr ""
#. +> trunk5
#: view/kateview.cpp:616
#, kde-format
msgid "Save &Copy As..."
msgstr ""
#. +> trunk5
#: view/kateview.cpp:617
#, kde-format
msgid "Save a copy of the current document to disk."
msgstr ""
#. +> trunk5
#: view/kateview.cpp:621
#, kde-format
msgid "This command opens a dialog and lets you choose a line that you want the cursor to move to."
msgstr ""
#. +> trunk5
#: view/kateview.cpp:624
#, kde-format
msgid "Move to Previous Modified Line"
msgstr ""
#. +> trunk5
#: view/kateview.cpp:625
#, kde-format
msgid "Move upwards to the previous modified line."
msgstr ""
#. +> trunk5
#: view/kateview.cpp:629
#, kde-format
msgid "Move to Next Modified Line"
msgstr ""
#. +> trunk5
#: view/kateview.cpp:630
#, kde-format
msgid "Move downwards to the next modified line."
msgstr ""
#. +> trunk5
#: view/kateview.cpp:634
#, kde-format
msgid "&Configure Editor..."
msgstr ""
#. +> trunk5
#: view/kateview.cpp:636
#, kde-format
msgid "Configure various aspects of this editor."
msgstr ""
#. +> trunk5
#: view/kateview.cpp:639
#, kde-format
msgid "&Mode"
msgstr ""
#. +> trunk5
#: view/kateview.cpp:641
#, kde-format
msgid "Here you can choose which mode should be used for the current document. This will influence the highlighting and folding being used, for example."
msgstr ""
#. +> trunk5
#: view/kateview.cpp:644
#, kde-format
msgid "&Highlighting"
msgstr ""
#. +> trunk5
#: view/kateview.cpp:646
#, kde-format
msgid "Here you can choose how the current document should be highlighted."
msgstr ""
#. +> trunk5
#: view/kateview.cpp:649
#, kde-format
msgid "&Schema"
msgstr ""
#. +> trunk5
#: view/kateview.cpp:654
#, kde-format
msgid "&Indentation"
msgstr ""
#. +> trunk5
#: view/kateview.cpp:658
#, kde-format
msgid "Select the entire text of the current document."
msgstr ""
#. +> trunk5
#: view/kateview.cpp:661
#, kde-format
msgid "If you have selected something within the current document, this will no longer be selected."
msgstr ""
#. +> trunk5
#: view/kateview.cpp:665
#, kde-format
msgid "Enlarge Font"
msgstr ""
#. +> trunk5
#: view/kateview.cpp:667
#, kde-format
msgid "This increases the display font size."
msgstr ""
#. +> trunk5
#: view/kateview.cpp:672
#, kde-format
msgid "Shrink Font"
msgstr ""
#. +> trunk5
#: view/kateview.cpp:674
#, kde-format
msgid "This decreases the display font size."
msgstr ""
#. +> trunk5
#: view/kateview.cpp:677
#, kde-format
msgid "Bl&ock Selection Mode"
msgstr ""
#. +> trunk5
#: view/kateview.cpp:680
#, kde-format
msgid "This command allows switching between the normal (line based) selection mode and the block selection mode."
msgstr ""
#. +> trunk5
#: view/kateview.cpp:684
#, kde-format
msgid "Switch to Next Input Mode"
msgstr ""
#. +> trunk5
#: view/kateview.cpp:686
#, kde-format
msgid "Switch to the next input mode."
msgstr ""
#. +> trunk5
#: view/kateview.cpp:689
#, kde-format
msgid "Overwr&ite Mode"
msgstr ""
#. +> trunk5
#: view/kateview.cpp:692
#, kde-format
msgid "Choose whether you want the text you type to be inserted or to overwrite existing text."
msgstr ""
#. +> trunk5
#: view/kateview.cpp:702
#, kde-format
msgid "Dynamic Word Wrap Indicators"
msgstr ""
#. +> trunk5
#: view/kateview.cpp:704
#, kde-format
msgid "Choose when the Dynamic Word Wrap Indicators should be displayed"
msgstr ""
#. +> trunk5
#: view/kateview.cpp:707
#, kde-format
msgid "&Off"
msgstr ""
#. +> trunk5
#: view/kateview.cpp:707
#, kde-format
msgid "Follow &Line Numbers"
msgstr ""
#. +> trunk5
#: view/kateview.cpp:707
#, kde-format
msgid "&Always On"
msgstr ""
#. +> trunk5
#: view/kateview.cpp:711
#, kde-format
msgid "Show Folding &Markers"
msgstr ""
#. +> trunk5
#: view/kateview.cpp:714
#, kde-format
msgid "You can choose if the codefolding marks should be shown, if codefolding is possible."
msgstr ""
#. +> trunk5
#: view/kateview.cpp:717
#, kde-format
msgid "Show &Icon Border"
msgstr ""
#. +> trunk5
#: view/kateview.cpp:720
#, kde-format
msgid ""
"Show/hide the icon border.<br />"
"<br />"
"The icon border shows bookmark symbols, for instance."
msgstr ""
#. +> trunk5
#: view/kateview.cpp:723
#, kde-format
msgid "Show &Line Numbers"
msgstr ""
#. +> trunk5
#: view/kateview.cpp:726
#, kde-format
msgid "Show/hide the line numbers on the left hand side of the view."
msgstr ""
#. +> trunk5
#: view/kateview.cpp:729
#, kde-format
msgid "Show Scroll&bar Marks"
msgstr ""
#. +> trunk5
#: view/kateview.cpp:731
#, kde-format
msgid ""
"Show/hide the marks on the vertical scrollbar.<br />"
"<br />"
"The marks show bookmarks, for instance."
msgstr ""
#. +> trunk5
#: view/kateview.cpp:734
#, kde-format
msgid "Show Scrollbar Mini-Map"
msgstr ""
#. +> trunk5
#: view/kateview.cpp:736
#, kde-format
msgid ""
"Show/hide the mini-map on the vertical scrollbar.<br />"
"<br />"
"The mini-map shows an overview of the whole document."
msgstr ""
#. i18n("Show the whole document in the Mini-Map"), this);
#. a->setWhatsThis(i18n("Display the whole document in the mini-map.<br /><br />With this option set the whole document will be visible in the mini-map."));
"<p>Quits the application. If <tt>w</tt> is prepended, it also writes the document(s) to disk. This command can be called in several ways:<br />"
" <tt>q</tt> — closes the current view.<br />"
" <tt>qa</tt> — closes all views, effectively quitting the application.<br />"
" <tt>wq</tt> — writes the current document to disk and closes its view.<br />"
" <tt>wqa</tt> — writes all documents to disk and quits.</p>"
"<p>In all cases, if the view being closed is the last view, the application quits. If no file name is associated with the document and it should be written to disk, a file dialog will be shown.</p>"
msgstr ""
#. +> trunk5
#: vimode/appcommands.cpp:231
#, kde-format
msgid ""
"<p><b>x/xa — write and quit</b></p>"
"<p>Usage: <tt><b>x[a]</b></tt></p>"
"<p>Saves document(s) and quits (e<b>x</b>its). This command can be called in two ways:<br />"
" <tt>x</tt> — closes the current view.<br />"
" <tt>xa</tt> — closes all views, effectively quitting the application.</p>"
"<p>In all cases, if the view being closed is the last view, the application quits. If no file name is associated with the document and it should be written to disk, a file dialog will be shown.</p>"
"<p>Unlike the 'w' commands, this command only writes the document if it is modified.</p>"
msgstr ""
#. +> trunk5
#: vimode/appcommands.cpp:244
#, kde-format
msgid ""
"<p><b>sp,split— Split horizontally the current view into two</b></p>"
"<p>Usage: <tt><b>sp[lit]</b></tt></p>"
"<p>The result is two views on the same document.</p>"
msgstr ""
#. +> trunk5
#: vimode/appcommands.cpp:249
#, kde-format
msgid ""
"<p><b>vs,vsplit— Split vertically the current view into two</b></p>"
"<p>Usage: <tt><b>vs[plit]</b></tt></p>"
"<p>The result is two views on the same document.</p>"
msgstr ""
#. +> trunk5
#: vimode/appcommands.cpp:254
#, kde-format
msgid ""
"<p><b>clo[se]— Close the current view</b></p>"
"<p>Usage: <tt><b>clo[se]</b></tt></p>"
"<p>After executing it, the current view will be closed.</p>"
msgstr ""
#. +> trunk5
#: vimode/appcommands.cpp:259
#, kde-format
msgid ""
"<p><b>[v]new — split view and create new document</b></p>"
"<p>Usage: <tt><b>[v]new</b></tt></p>"
"<p>Splits the current view and opens a new document in the new view. This command can be called in two ways:<br />"
" <tt>new</tt> — splits the view horizontally and opens a new document.<br />"
" <tt>vnew</tt> — splits the view vertically and opens a new document.<br />"
"</p>"
msgstr ""
#. +> trunk5
#: vimode/appcommands.cpp:268
#, kde-format
msgid ""
"<p><b>e[dit] — reload current document</b></p>"
"<p>Usage: <tt><b>e[dit]</b></tt></p>"
"<p>Starts <b>e</b>diting the current document again. This is useful to re-edit the current file, when it has been changed by another program.</p>"
msgstr ""
#. +> trunk5
#: vimode/appcommands.cpp:485
#, kde-format
msgid ""
"<p><b>b,buffer — Edit document N from the document list</b></p>"
"<p>Usage: <tt><b>b[uffer] [N]</b></tt></p>"
msgstr ""
#. +> trunk5
#: vimode/appcommands.cpp:490
#, kde-format
msgid ""
"<p><b>bp,bprev — previous buffer</b></p>"
"<p>Usage: <tt><b>bp[revious] [N]</b></tt></p>"
"<p>Goes to <b>[N]</b>th previous document (\"<b>b</b>uffer\") in document list. </p>"
"<p> <b>[N]</b> defaults to one. </p>"
"<p>Wraps around the start of the document list.</p>"
msgstr ""
#. +> trunk5
#: vimode/appcommands.cpp:498
#, kde-format
msgid ""
"<p><b>bn,bnext — switch to next document</b></p>"
"<p>Usage: <tt><b>bn[ext] [N]</b></tt></p>"
"<p>Goes to <b>[N]</b>th next document (\"<b>b</b>uffer\") in document list.<b>[N]</b> defaults to one. </p>"
"<p>Wraps around the end of the document list.</p>"
msgstr ""
#. +> trunk5
#: vimode/appcommands.cpp:506
#, kde-format
msgid ""
"<p><b>bf,bfirst — first document</b></p>"
"<p>Usage: <tt><b>bf[irst]</b></tt></p>"
"<p>Goes to the <b>f</b>irst document (\"<b>b</b>uffer\") in document list.</p>"
msgstr ""
#. +> trunk5
#: vimode/appcommands.cpp:512
#, kde-format
msgid ""
"<p><b>bl,blast — last document</b></p>"
"<p>Usage: <tt><b>bl[ast]</b></tt></p>"
"<p>Goes to the <b>l</b>ast document (\"<b>b</b>uffer\") in document list.</p>"
msgid "When selected, vi commands will override Kate's built-in commands. For example: Ctrl+R will redo, and override the standard action (showing the search and replace dialog)."
"Key mapping is used to change the meaning of typed keys. This allows you to move commands to other keys or make special keypresses for doing a series of commands.\n"
"\n"
"Example:\n"
"\"<F2>\" → \"I-- <esc>\"\n"
"\n"
"This will prepend \"-- \" to a line when pressing F2."
msgid "This shortcut will activate the applet: it will give the keyboard focus to it, and if the applet has a popup (such as the start menu), the popup will be open."
# This file is distributed under the same license as the kalgebra package.
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
#, fuzzy
msgid ""
msgstr ""
"Project-Id-Version: kalgebra\n"
"Report-Msgid-Bugs-To: http://bugs.kde.org\n"
-"POT-Creation-Date: 2018-08-19 09:01+0200\n"
+"POT-Creation-Date: 2018-08-29 09:24+0200\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <kde-i18n-doc@kde.org>\n"
"Language: \n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
#. +> trunk5
#: main.cpp:47
#, kde-format
msgid "A portable calculator"
msgstr ""
#. +> trunk5
#: main.cpp:48
#, kde-format
msgid "(C) 2006-2018 Aleix Pol i Gonzalez"
msgstr ""
#. +> trunk5
#: main.cpp:50
#, kde-format
msgctxt "NAME OF TRANSLATORS"
msgid "Your names"
msgstr ""
#. +> trunk5
#: main.cpp:50
#, kde-format
msgctxt "EMAIL OF TRANSLATORS"
msgid "Your emails"
msgstr ""
#. +> trunk5
#: plugins/About.qml:32
#, kde-format
msgid "KAlgebra is brought to you by the lovely community of <a href='http://kde.org'>KDE</a> and <a href='http://edu.kde.org/'>KDE Edu</a> from a Free Software environment."
msgstr ""
#. +> trunk5
#: plugins/About.qml:41
#, kde-format
msgid ""
"In case you want to learn more about KAlgebra, you can find more information <a href='https://edu.kde.org/applications/mathematics/kalgebra/'>in the official site</a> and in the <a href='https://userbase.kde.org/KAlgebra'>users wiki</a>.<br/>"
"If you have any problem with your software, please report it to <a href='https://bugs.kde.org'>our bug tracker</a>."
"<p>This dialog can be used to setup external command line applications as audio encoders. These can then be used by K3b to encode audio data (Tracks from an audio CD or the titles from an audio project) to formats that are normally not supported (i.e. no encoder plugin exists).\n"
"<p>K3b comes with a selection of predefined external applications that depends on the installed applications."
"Please insert the command used to encode the audio data. The command has to read raw little endian (see <em>Swap Byte Order</em>) 16-bit stereo audio frames from stdin.\n"
"<p>The following strings will be replaced by K3b:<br>"
"\n"
"<b>%f</b> - The filename of the resulting file. This is where the command has to write its output to.<br>"
"\n"
"<em>The following refer to metadata stored for example in the ID3 tag of an mp3 file (Be aware that these values might be empty).</em><br>"
"<p>Bitrate is of course the main influence on quality. The higher the bitrate, the higher the quality. But for a given bitrate, we have a choice of algorithms to determine the best scalefactors and huffman encoding (noise shaping).\n"
"<p>The quality increases from 0 to 9 while the encoding speed drops.\n"
"<p>9 uses the slowest & best possible version of all algorithms.\n"
"<p><b>7 is the recommended setting</b> while 4 still produced reasonable quality at good speed.\n"
"<p>0 disables almost all algorithms including psy-model resulting in poor quality.\n"
"<p><b>This setting has no influence on the size of the resulting file.</b>"
"<p>If this option is checked, LAME will enforce the 7680 bit limitation on total frame size.<br>"
"\n"
"This results in many wasted bits for high bitrate encodings but will ensure strict ISO compatibility. This compatibility might be important for hardware players."
msgid "<p>If this option is checked, a cyclic redundancy check (CRC) code will be added to each frame, allowing transmission errors that could occur on the MP3 stream to be detected; however, it takes 16 bits per frame that would otherwise be used for encoding, thus slightly reducing the sound quality."
"<p>Select the channel mode of the resulting MP3 file:\n"
"<p><b>Stereo</b><br>"
"\n"
"In this mode, the encoder makes no use of potential correlations between the two input channels; it can, however, negotiate the bit demand between both channel, i.e. give one channel more bits if the other contains silence or needs fewer bits because of a lower complexity.\n"
"<p><b>Joint-Stereo</b><br>"
"\n"
"In this mode, the encoder will make use of correlations between both channels. The signal will be matrixed into a sum (\"mid\"), computed by L+R, and difference (\"side\") signal, computed by L-R, and more bits are allocated to the mid channel. This will effectively increase the bandwidth if the signal does not have too much stereo separation, thus giving a significant gain in encoding quality.\n"
"<p><b>Mono</b><br>"
"\n"
"The input will be encoded as a mono signal. If it was a stereo signal, it will be downsampled to mono. The downmix is calculated as the sum of the left and right channel, attenuated by 6 dB."
"<p>Vorbis' audio quality is not best measured in kilobits per second, but on a scale from -1 to 10 called \"quality\". "
"<p>For now, quality -1 is roughly equivalent to 45kbps average, 5 is roughly 160kbps, and 10 gives about 400kbps. Most people seeking very-near-CD-quality audio encode at a quality of 5 or, for lossless stereo coupling, 6. The default setting is quality 3, which at approximately 110kbps gives a smaller filesize and significantly better fidelity than .mp3 compression at 128kbps. "
"<p><em>This explanation was copied from the www.vorbis.com FAQ.</em>"
"<p>Vorbis' audio quality is not best measured in kilobits per second, but on a scale from -1 to 10 called <em>quality</em>."
"<p>For now, quality -1 is roughly equivalent to 45kbps average, 5 is roughly 160kbps, and 10 gives about 400kbps. Most people seeking very-near-CD-quality audio encode at a quality of 5 or, for lossless stereo coupling, 6. The quality 3 gives, at approximately 110kbps a smaller filesize and significantly better fidelity than .mp3 compression at 128kbps."
"<p><em>This explanation is based on the one from the www.vorbis.com FAQ.</em>"
"<p>The sample data encoding is signed linear (2's complement), unsigned linear, u-law (logarithmic), A-law (logarithmic), ADPCM, IMA_ADPCM, GSM, or Floating-point.</p>"
"\n"
"<p><b>U-law</b> (actually shorthand for mu-law) and <b>A-law</b> are the U.S. and international standards for logarithmic telephone sound compression. When uncompressed u-law has roughly the precision of 14-bit PCM audio and A-law has roughly the precision of 13-bit PCM audio. A-law and u-law data is sometimes encoded using a reversed bit-ordering (i.e. MSB becomes LSB).<br>"
" <b>ADPCM </b> is a form of sound compression that has a good compromise between good sound quality and fast encoding/decoding time. It is used for telephone sound compression and places where full fidelity is not as important. When uncompressed it has roughly the precision of 16-bit PCM audio. Popular versions of ADPCM include G.726, MS ADPCM, and IMA ADPCM. It has different meanings in different file handlers. In .wav files it represents MS ADPCM files, in all others it means G.726 ADPCM. <br>"
" <b>IMA ADPCM</b> is a specific form of ADPCM compression, slightly simpler and slightly lower fidelity than Microsoft's flavor of ADPCM. IMA ADPCM is also called DVI ADPCM.<br>"
" <b>GSM</b> is a standard used for telephone sound compression in European countries and is gaining popularity because of its good quality. It is usually CPU intensive to work with GSM audio data.</p>"
" "
"<p><em>Description based on the SoX manpage</em></p>"
msgid "<qt>This specifies how the files should be renamed. Currently only the special strings <em>%a</em> (Artist), <em>%n</em> (Track number), and <em>%t</em> (Title) are supported."
"<p>Data tracks may be written in two different modes:</p>"
"<p><b>Auto</b><br>"
"Let K3b select the best suited data mode.</p>"
"<p><b>Mode 1</b><br>"
"This is the <em>original</em> writing mode as introduced in the <em>Yellow Book</em> standard. It is the preferred mode when writing pure data CDs.</p>"
"<p><b>Mode 2</b><br>"
"To be exact <em>XA Mode 2 Form 1</em>, but since the other modes are rarely used it is common to refer to it as <em>Mode 2</em>.</p>"
"<p><b>Be aware:</b> Do not mix different modes on one CD. Some older drives may have problems reading mode 1 multisession CDs."
msgstr ""
#. +> trunk5 stable5
#: k3bdebuggingoutputdialog.cpp:45
#, kde-format
msgid "Debugging Output"
msgstr ""
#. +> trunk5 stable5
#: k3bdebuggingoutputdialog.cpp:55
#, kde-format
msgid "Save to file"
msgstr ""
#. +> trunk5 stable5
#: k3bdebuggingoutputdialog.cpp:59
#, kde-format
msgid "Copy to clipboard"
msgstr ""
#. +> trunk5 stable5
#: k3bdebuggingoutputdialog.cpp:102
#, kde-format
msgid "Could not open file %1"
msgstr ""
#. i18n: ectx: Menu (device)
#. +> trunk5 stable5
#: k3bdeviceui.rc:4 k3bui.rc:19
#, kde-format
msgid "&Device"
msgstr ""
#. +> trunk5 stable5
#: k3bdiroperator.cpp:51
#, kde-format
msgid "K3b Bookmarks"
msgstr ""
#. +> trunk5 stable5
#: k3bdiroperator.cpp:54
#, kde-format
msgid "Bookmarks"
msgstr ""
#. +> trunk5 stable5
#: k3bdiroperator.cpp:58 k3bfiletreeview.cpp:97
#, kde-format
msgid "&Add to Project"
msgstr ""
#. +> trunk5 stable5
#: k3bdirview.cpp:201
#, kde-format
msgid "K3b uses vcdxrip from the vcdimager package to rip Video CDs. Please make sure it is installed."
msgstr ""
#. +> trunk5 stable5
#: k3bdirview.cpp:235
#, kde-format
msgid "Mount Failed"
msgstr ""
#. +> trunk5 stable5
#: k3bdirview.cpp:236
#, kde-format
msgid "<p>K3b was unable to mount medium <b>%1</b> in device <em>%2 - %3</em>"
msgstr ""
#. +> trunk5 stable5
#: k3bdirview.cpp:251
#, kde-format
msgid "Unmount Failed"
msgstr ""
#. +> trunk5 stable5
#: k3bdirview.cpp:252
#, kde-format
msgid "<p>K3b was unable to unmount medium <b>%1</b> in device <em>%2 - %3</em>"
msgid "K3b did not find any optical device in your system."
msgstr ""
#. +> trunk5 stable5
#: k3bsystemproblemdialog.cpp:188
#, kde-format
msgid "Make sure HAL daemon is running, it is used by K3b for finding devices."
msgstr ""
#. +> trunk5 stable5
#: k3bsystemproblemdialog.cpp:196
#, kde-format
msgid "No CD/DVD/BD writer found."
msgstr ""
#. +> trunk5 stable5
#: k3bsystemproblemdialog.cpp:197
#, kde-format
msgid "K3b did not find an optical writing device in your system. Thus, you will not be able to burn CDs or DVDs. However, you can still use other K3b features such as audio track extraction, audio transcoding or ISO 9660 image creation."
msgid "Check permissions via Settings -> Configure K3b... -> Programs -> Permissions. If K3b's default value is set make sure you are member of \"%1\" group."
msgid "It is highly recommended to configure cdrecord to run with root privileges, as then cdrecord runs with high priority that increases the overall stability of the burning process. As well as this, it allows the size of the burning buffer to be changed, and a lot of user problems can be solved this way."
msgid "K3b will not be able to copy DVDs on-the-fly or write a DVD+RW in multiple sessions using a growisofs version older than 5.12."
msgstr ""
#. +> trunk5 stable5
#: k3bsystemproblemdialog.cpp:345
#, kde-format
msgid "It is highly recommended to use growisofs 7.0 or higher. K3b will not be able to write a DVD+RW in multiple sessions using a growisofs version older than 7.0."
msgstr ""
#. +> trunk5 stable5
#: k3bsystemproblemdialog.cpp:366
#, kde-format
msgid "K3b uses dvd+rw-format to format DVD-RWs and DVD+RWs."
msgstr ""
#. +> trunk5 stable5
#: k3bsystemproblemdialog.cpp:379
#, kde-format
msgid "K3b needs at least mkisofs version 1.14. Older versions may introduce problems when creating data projects."
msgstr ""
#. +> trunk5 stable5
#: k3bsystemproblemdialog.cpp:403
#, kde-format
msgid "Device %1 - %2 is automounted."
msgstr ""
#. +> trunk5 stable5
#: k3bsystemproblemdialog.cpp:405
#, kde-format
msgid "K3b is not able to unmount automounted devices. Thus, especially DVD+RW rewriting might fail. There is no need to report this as a bug or feature wish; it is not possible to solve this problem from within K3b."
msgstr ""
#. +> trunk5 stable5
#: k3bsystemproblemdialog.cpp:409
#, kde-format
msgid "Replace the automounting entries in /etc/fstab with old-fashioned ones or use a user-space mounting solution like pmount or ivman."
msgstr ""
#. +> trunk5 stable5
#: k3bsystemproblemdialog.cpp:418
#, kde-format
msgid "No ATAPI writing support in kernel"
msgstr ""
#. +> trunk5 stable5
#: k3bsystemproblemdialog.cpp:419
#, kde-format
msgid "Your kernel does not support writing without SCSI emulation but there is at least one writer in your system not configured to use SCSI emulation."
msgstr ""
#. +> trunk5 stable5
#: k3bsystemproblemdialog.cpp:423
#, kde-format
msgid "The best and recommended solution is to enable ide-scsi (SCSI emulation) for all devices. This way you will not have any problems. Be aware that you may still enable DMA on ide-scsi emulated drives."
msgid "The configured version of %1 does not support writing to ATAPI devices without SCSI emulation and there is at least one writer in your system not configured to use SCSI emulation."
msgid "The best, and recommended, solution is to use ide-scsi (SCSI emulation) for all writer devices: this way you will not have any problems; or, you can install (or select as the default) a more recent version of %1."
msgstr ""
#. +> trunk5 stable5
#: k3bsystemproblemdialog.cpp:467
#, kde-format
msgid "Install cdrdao >= 1.1.8 which supports writing to ATAPI devices directly."
msgstr ""
#. +> trunk5 stable5
#: k3bsystemproblemdialog.cpp:483
#, kde-format
msgid "K3b will not be able to write DVD-R Dual Layer media using a growisofs version older than 6.0."
msgstr ""
#. +> trunk5 stable5
#: k3bsystemproblemdialog.cpp:485
#, kde-format
msgid "Install a more recent version of growisofs."
msgstr ""
#. +> trunk5 stable5
#: k3bsystemproblemdialog.cpp:497
#, kde-format
msgid "No write access to device %1"
msgstr ""
#. +> trunk5 stable5
#: k3bsystemproblemdialog.cpp:498
#, kde-format
msgid "K3b needs write access to all the devices to perform certain tasks. Without it you might encounter problems with %1 - %2"
msgstr ""
#. +> trunk5 stable5
#: k3bsystemproblemdialog.cpp:500
#, kde-format
msgid "Make sure you have write access to %1. In case you are not using devfs or udev click \"Modify Permissions...\" and setup permissions by hand."
msgstr ""
#. +> trunk5 stable5
#: k3bsystemproblemdialog.cpp:506
#, kde-format
msgid "DMA disabled on device %1 - %2"
msgstr ""
#. +> trunk5 stable5
#: k3bsystemproblemdialog.cpp:507
#, kde-format
msgid "With most modern CD/DVD/BD devices enabling DMA highly increases read/write performance. If you experience very low writing speeds this is probably the cause."
msgstr ""
#. +> trunk5 stable5
#: k3bsystemproblemdialog.cpp:510
#, kde-format
msgid "Enable DMA temporarily as root with 'hdparm -d 1 %1'."
msgstr ""
#. +> trunk5 stable5
#: k3bsystemproblemdialog.cpp:525
#, kde-format
msgid "User parameters specified for external program %1"
msgstr ""
#. +> trunk5 stable5
#: k3bsystemproblemdialog.cpp:526
#, kde-format
msgid "Sometimes it may be necessary to specify user parameters in addition to the parameters generated by K3b. This is simply a warning to make sure that these parameters are really wanted and will not be part of some bug report."
msgstr ""
#. +> trunk5 stable5
#: k3bsystemproblemdialog.cpp:529
#, kde-format
msgid "To remove the user parameters for the external program %1 open the K3b settings page 'Programs' and choose the tab 'User Parameters'."
msgstr ""
#. +> trunk5 stable5
#: k3bsystemproblemdialog.cpp:550
#, kde-format
msgid "MP3 Audio Decoder plugin not found."
msgstr ""
#. +> trunk5 stable5
#: k3bsystemproblemdialog.cpp:551
#, kde-format
msgid "K3b could not load or find the MP3 decoder plugin. This means that you will not be able to create Audio CDs from MP3 files. Many Linux distributions do not include MP3 support for legal reasons."
msgstr ""
#. +> trunk5 stable5
#: k3bsystemproblemdialog.cpp:554
#, kde-format
msgid "To enable MP3 support, please install the MAD MP3 decoding library as well as the K3b MAD MP3 decoder plugin (the latter may already be installed but not functional due to the missing libmad). Some distributions allow installation of MP3 support via an online update tool."
msgstr ""
#. +> trunk5 stable5
#: k3bsystemproblemdialog.cpp:569
#, kde-format
msgid "System locale charset is ANSI_X3.4-1968"
msgstr ""
#. +> trunk5 stable5
#: k3bsystemproblemdialog.cpp:570
#, kde-format
msgid "Your system's locale charset (i.e. the charset used to encode filenames) is set to ANSI_X3.4-1968. It is highly unlikely that this has been done intentionally. Most likely the locale is not set at all. An invalid setting will result in problems when creating data projects."
msgstr ""
#. +> trunk5 stable5
#: k3bsystemproblemdialog.cpp:574
#, kde-format
msgid "To properly set the locale charset make sure the LC_* environment variables are set. Normally the distribution setup tools take care of this."
msgstr ""
#. +> trunk5 stable5
#: k3bsystemproblemdialog.cpp:587
#, kde-format
msgid "Running K3b as root user"
msgstr ""
#. +> trunk5 stable5
#: k3bsystemproblemdialog.cpp:588
#, kde-format
msgid "It is not recommended to run K3b under the root user account. This introduces unnecessary security risks."
msgstr ""
#. +> trunk5 stable5
#: k3bsystemproblemdialog.cpp:590
#, kde-format
msgid "Run K3b from a proper user account and setup the device and external tool permissions appropriately."
msgstr ""
#. +> trunk5 stable5
#: k3bsystemproblemdialog.cpp:592
#, kde-format
msgid "The latter can be done via \"Configure K3b...\"."
msgstr ""
#. +> trunk5 stable5
#: k3bsystemproblemdialog.cpp:622
#, kde-format
msgid "System configured properly"
msgstr ""
#. +> trunk5 stable5
#: k3bsystemproblemdialog.cpp:623
#, kde-format
msgid "No problems found in system configuration."
msgstr ""
#. +> trunk5 stable5
#: k3btempdirselectionwidget.cpp:52
#, kde-format
msgid "Free space in temporary folder:"
msgstr ""
#. +> trunk5 stable5
#: k3btempdirselectionwidget.cpp:82
#, kde-format
msgid "The folder in which to save the image files"
msgstr ""
#. +> trunk5 stable5
#: k3btempdirselectionwidget.cpp:86
#, kde-format
msgid ""
"<p>This is the folder in which K3b will save the <em>image files</em>."
"<p>Please make sure that it resides on a partition that has enough free space."
msgstr ""
#. +> trunk5 stable5
#: k3btempdirselectionwidget.cpp:193
#, kde-format
msgid "Select Temporary Folder"
msgstr ""
#. +> trunk5 stable5
#: k3btempdirselectionwidget.cpp:195
#, kde-format
msgid "Wri&te image files to:"
msgstr ""
#. +> trunk5 stable5
#: k3btempdirselectionwidget.cpp:196
#, kde-format
msgid "Temporary Folder"
msgstr ""
#. +> trunk5 stable5
#: k3btempdirselectionwidget.cpp:199
#, kde-format
msgid "Select Temporary File"
msgstr ""
#. +> trunk5 stable5
#: k3btempdirselectionwidget.cpp:201
#, kde-format
msgid "Wri&te image file to:"
msgstr ""
#. +> trunk5 stable5
#: k3btempdirselectionwidget.cpp:202
#, kde-format
msgid "Temporary File"
msgstr ""
#. +> trunk5 stable5
#: k3btempdirselectionwidget.cpp:212
#, kde-format
msgid "Size of project:"
msgstr ""
#. i18n: ectx: Menu (project)
#. +> trunk5 stable5
#: k3bui.rc:4
#, kde-format
msgid "&Project"
msgstr ""
#. i18n: ectx: Menu (tools)
#. +> trunk5 stable5
#: k3bui.rc:9
#, kde-format
msgid "&Tools"
msgstr ""
#. i18n: ectx: Menu (help)
#. +> trunk5 stable5
#: k3bui.rc:27
#, kde-format
msgid "&Help"
msgstr ""
#. i18n: ectx: ToolBar (mainToolBar)
#. +> trunk5 stable5
#: k3bui.rc:32
#, kde-format
msgid "Main Toolbar"
msgstr ""
#. +> trunk5 stable5
#: k3bwelcomewidget.cpp:87
#, kde-format
msgid "More actions..."
msgstr ""
#. +> trunk5 stable5
#: k3bwelcomewidget.cpp:270
#, kde-format
msgid "Welcome to K3b – The CD, DVD, and Blu-ray Kreator"
msgid "The external application to actually burn the medium"
msgstr ""
#. +> trunk5 stable5
#: k3bwriterselectionwidget.cpp:173
#, kde-format
msgid ""
"<p>Select the medium that you want to use for burning."
"<p>In most cases there will only be one medium available which does not leave much choice."
msgstr ""
#. +> trunk5 stable5
#: k3bwriterselectionwidget.cpp:176
#, kde-format
msgid ""
"<p>Select the speed with which you want to burn."
"<p><b>Auto</b><br>"
"This will choose the maximum writing speed possible with the used medium. This is the recommended selection for most media.</p>"
"<p><b>Ignore</b> (DVD only)<br>"
"This will leave the speed selection to the writer device. Use this if K3b is unable to set the writing speed."
"<p>1x refers to 175 KB/s for CD, 1385 KB/s for DVD, and 4496 KB/s for Blu-ray.</p>"
"<p><b>Caution:</b> Make sure your system is able to send the data fast enough to prevent buffer underruns."
msgstr ""
#. +> trunk5 stable5
#: k3bwriterselectionwidget.cpp:187
#, kde-format
msgid ""
"<p>K3b uses the command line tools cdrecord, growisofs, and cdrdao to actually write a CD or DVD."
"<p>Normally K3b chooses the best suited application for every task automatically but in some cases it may be possible that one of the applications does not work as intended with a certain writer. In this case one may select the application manually."
msgid "Please enter the speed that K3b should use for burning (Example: 16x)."
msgstr ""
#. +> trunk5 stable5
#: k3bwriterselectionwidget.cpp:609
#, kde-format
msgid ""
"<p>K3b is not able to perfectly determine the maximum writing speed of an optical writer. Writing speed is always reported subject to the inserted medium."
"<p>Please enter the writing speed here and K3b will remember it for future sessions (Example: 16x)."
msgstr ""
#. +> trunk5 stable5
#: k3bwriterselectionwidget.cpp:630
#, kde-format
msgid "Set writing speed manually"
msgstr ""
#. +> trunk5 stable5
#: k3bwritingmodewidget.cpp:27
#, kde-format
msgid "Let K3b select the best-suited mode. This is the recommended selection."
msgstr ""
#. +> trunk5 stable5
#: k3bwritingmodewidget.cpp:29
#, kde-format
msgid ""
"<em>Disk At Once</em> or more properly <em>Session At Once</em>. The laser is never turned off while writing the CD or DVD. This is the preferred mode to write audio CDs since it allows pregaps other than 2 seconds. Not all writers support DAO.<br>"
"DVD-R(W)s written in DAO provide the best DVD-Video compatibility."
msgstr ""
#. +> trunk5 stable5
#: k3bwritingmodewidget.cpp:35
#, kde-format
msgid ""
"<em>Track At Once</em> should be supported by every CD writer. The laser will be turned off after every track.<br>"
"Most CD writers need this mode for writing multisession CDs."
msgstr ""
#. +> trunk5 stable5
#: k3bwritingmodewidget.cpp:41
#, kde-format
msgid ""
"RAW writing mode. The error correction data is created by the software instead of the writer device.<br>"
"Try this if your CD writer fails to write in DAO and TAO."
msgstr ""
#. +> trunk5 stable5
#: k3bwritingmodewidget.cpp:45
#, kde-format
msgid "Incremental sequential is the default writing mode for DVD-R(W). It allows multisession DVD-R(W)s. It only applies to DVD-R(W)."
msgstr ""
#. +> trunk5 stable5
#: k3bwritingmodewidget.cpp:48
#, kde-format
msgid "Restricted Overwrite allows to use a DVD-RW just like a DVD-RAM or a DVD+RW. The media may just be overwritten. It is not possible to write multisession DVD-RWs in this mode but K3b uses growisofs to grow an ISO 9660 filesystem within the first session, thus allowing new files to be added to an already burned disk."
msgstr ""
#. +> trunk5 stable5
#: k3bwritingmodewidget.cpp:104
#, kde-format
msgid "Select the writing mode to use"
msgstr ""
#. +> trunk5 stable5
#: k3bwritingmodewidget.cpp:105
#, kde-format
msgid "Writing mode"
msgstr ""
#. +> trunk5 stable5
#: k3bwritingmodewidget.cpp:106
#, kde-format
msgid "Be aware that the writing mode is ignored when writing DVD+R(W) and BD-R(E) since there is only one way to write them."
msgstr ""
#. +> trunk5 stable5
#: k3bwritingmodewidget.cpp:109
#, kde-format
msgid "The selection of writing modes depends on the inserted burning medium."
msgstr ""
#. +> trunk5 stable5
#: k3bwritingmodewidget.cpp:165
#, kde-format
msgid "DAO"
msgstr ""
#. +> trunk5 stable5
#: k3bwritingmodewidget.cpp:167
#, kde-format
msgid "TAO"
msgstr ""
#. +> trunk5 stable5
#: k3bwritingmodewidget.cpp:169
#, kde-format
msgid "RAW"
msgstr ""
#. +> trunk5 stable5
#: k3bwritingmodewidget.cpp:171
#, kde-format
msgid "Restricted Overwrite"
msgstr ""
#. +> trunk5 stable5
#: k3bwritingmodewidget.cpp:173
#, kde-format
msgid "Incremental"
msgstr ""
#. +> trunk5 stable5
#: main.cpp:31
#, kde-format
msgid "K3b"
msgstr ""
#. +> trunk5 stable5
#: main.cpp:32
#, kde-format
msgid ""
"<p>K3b is a full-featured CD/DVD/Blu-ray burning and ripping application.<br/>"
"It supports a variety of project types as well as copying of optical media, burning of different types of images, and ripping Audio CDs, Video CDs, and Video DVDs.<br/>"
"Its convenient user interface is targeted at all audiences, trying to be as simple as possible for novice users while also providing all features an advanced user might need."
msgid "Set the device to be used for new projects. (This option has no effect: its main purpose is to enable handling of empty media from the KDE Media Manager.)"
"Plain images are written as is to the medium using a single data track. Typical plain images are iso images as created by K3b's data project."
"<p><b>Cue/bin images</b><br/>"
"Cue/bin images consist of a cue file describing the table of contents of the medium and an image file which contains the actual data. The data will be written to the medium according to the cue file."
"<p><b>Audio Cue image</b><br/>"
"Audio cue images are a special kind of cue/bin image containing an image of an audio CD. The actual audio data can be encoded using any audio format supported by K3b. Audio cue files can also be imported into K3b audio projects which allows to change the order and add or remove tracks."
"<p><b>Cdrecord clone images</b><br/>"
"K3b creates a cdrecord clone image of a single-session CD when copying a CD in clone mode. These images can be reused here."
"<p><b>Cdrdao TOC files</b><br/>"
"K3b supports writing cdrdao's own image format, the toc files."
msgstr ""
#. +> trunk5 stable5
#: misc/k3bimagewritingdialog.cpp:715
#, kde-format
msgid ""
"<p>The actual file size does not match the size declared in the file header. If it has been downloaded make sure the download is complete.</p>"
"<p>Only continue if you know what you are doing.</p>"
msgid "Disable the source drive's error correction"
msgstr ""
#. +> trunk5 stable5
#: misc/k3bmediacopydialog.cpp:213
#, kde-format
msgid "Copy CD-Text from the source CD if available."
msgstr ""
#. +> trunk5 stable5
#: misc/k3bmediacopydialog.cpp:215
#, kde-format
msgid ""
"<p>If this option is checked K3b will disable the source drive's ECC/EDC error correction. This way sectors that are unreadable by intention can be read."
"<p>This may be useful for cloning CDs with copy protection based on corrupted sectors."
msgstr ""
#. +> trunk5 stable5
#: misc/k3bmediacopydialog.cpp:220
#, kde-format
msgid "<p>If this option is checked K3b will search for CD-Text on the source CD. Disable it if your CD drive has problems with reading CD-Text or you want to stick to CDDB info."
msgstr ""
#. +> trunk5 stable5
#: misc/k3bmediacopydialog.cpp:223
#, kde-format
msgid "<p>If this option is checked and K3b is not able to read a data sector from the source medium it will be replaced with zeros on the resulting copy."
msgstr ""
#. +> trunk5 stable5
#: misc/k3bmediacopydialog.cpp:228
#, kde-format
msgid ""
"<p>This is the normal copy mode for DVD, Blu-ray, and most CD media types. It allows copying Audio CDs, multi and single session Data Media, and Enhanced Audio CDs (an Audio CD containing an additional data session)."
"<p>For Video CDs please use the CD Cloning mode."
msgstr ""
#. +> trunk5 stable5
#: misc/k3bmediacopydialog.cpp:233
#, kde-format
msgid ""
"<p>In CD Cloning mode K3b performs a raw copy of the CD. That means it does not care about the content but simply copies the CD bit by bit. It may be used to copy Video CDs or CDs which contain erroneous sectors."
"<p><b>Caution:</b> Only single session CDs can be cloned."
msgid "There does not seem to be enough free space in the temporary folder. Write anyway?"
msgstr ""
#. +> trunk5 stable5
#: misc/k3bmediacopydialog.cpp:550
#, kde-format
msgid "Use the same device for burning"
msgstr ""
#. +> trunk5 stable5
#: misc/k3bmediacopydialog.cpp:551
#, kde-format
msgid "<qt>Use the same device for burning <i>(Or insert another medium)</i>"
msgstr ""
#. +> trunk5 stable5
#: misc/k3bmediaformattingdialog.cpp:47
#, kde-format
msgid "Format and Erase"
msgstr ""
#. +> trunk5 stable5
#: misc/k3bmediaformattingdialog.cpp:48
#, kde-format
msgid "CD-RW"
msgstr ""
#. +> trunk5 stable5
#: misc/k3bmediaformattingdialog.cpp:48
#, kde-format
msgid "DVD±RW"
msgstr ""
#. +> trunk5 stable5
#: misc/k3bmediaformattingdialog.cpp:48
#, kde-format
msgid "BD-RE"
msgstr ""
#. +> trunk5 stable5
#: misc/k3bmediaformattingdialog.cpp:72
#, kde-format
msgid "Force"
msgstr ""
#. +> trunk5 stable5
#: misc/k3bmediaformattingdialog.cpp:73
#, kde-format
msgid "Quick format"
msgstr ""
#. +> trunk5 stable5
#: misc/k3bmediaformattingdialog.cpp:87
#, kde-format
msgid "Force formatting of empty DVDs"
msgstr ""
#. +> trunk5 stable5
#: misc/k3bmediaformattingdialog.cpp:88
#, kde-format
msgid ""
"<p>If this option is checked K3b will format a DVD-RW even if it is empty. It may also be used to force K3b to format a DVD+RW, BD-RE or a DVD-RW in restricted overwrite mode."
"<p><b>Caution:</b> It is not recommended to format a DVD often as it may become unusable after only 10-20 reformat procedures."
"<p>DVD+RW and BD-RE media only needs to be formatted once. After that it just needs to be overwritten. The same applies to DVD-RW in restricted overwrite mode."
msgstr ""
#. +> trunk5 stable5
#: misc/k3bmediaformattingdialog.cpp:98
#, kde-format
msgid "Try to perform quick formatting"
msgstr ""
#. +> trunk5 stable5
#: misc/k3bmediaformattingdialog.cpp:99
#, kde-format
msgid ""
"<p>If this option is checked K3b will tell the writer to perform a quick format."
"<p>Erasing a rewritable medium completely can take a very long time and some writers perform a full format even if quick format is enabled."
msgid "<p>If this option is checked K3b will display the progress in KDE notification area. If K3b is run outside KDE environment a separate progress window may be shown instead.</p>"
msgid "<p>If this option is checked K3b will not close action dialogs such as the CD Copy dialog after the process has been finished. It will be kept open to start a new process, for instance, copying another CD."
msgid "<p>Here all <em>K3b Plugins</em> may be configured. Be aware that this does not include the <em>KPart Plugins</em> which embed themselves in the K3b menu structure.</p>"
msgid "Allow burning more than the official media capacities"
msgstr ""
#. +> trunk5 stable5
#: option/k3badvancedoptiontab.cpp:101
#, kde-format
msgid "Show advanced GUI elements like allowing to choose between cdrecord and cdrdao"
msgstr ""
#. +> trunk5 stable5
#: option/k3badvancedoptiontab.cpp:102
#, kde-format
msgid "Automatically erase CD-RWs and DVD-RWs without asking"
msgstr ""
#. +> trunk5 stable5
#: option/k3badvancedoptiontab.cpp:103
#, kde-format
msgid "Do not eject the burn medium after a completed burn process"
msgstr ""
#. +> trunk5 stable5
#: option/k3badvancedoptiontab.cpp:104
#, kde-format
msgid "Force K3b to continue some operations otherwise deemed as unsafe"
msgstr ""
#. +> trunk5 stable5
#: option/k3badvancedoptiontab.cpp:106
#, kde-format
msgid ""
"<p>If this option is checked additional GUI elements which allow one to influence the behavior of K3b are shown. This includes the manual selection of the used burning tool. (Choose between cdrecord and cdrdao when writing a CD or between cdrecord and growisofs when writing a DVD/BD.)"
"<p><b>Be aware that K3b does not support all possible tools in all project types and actions.</b>"
msgstr ""
#. +> trunk5 stable5
#: option/k3badvancedoptiontab.cpp:114
#, kde-format
msgid ""
"<p>Each medium has an official maximum capacity which is stored in a read-only area of the medium and is guaranteed by the vendor. However, this official maximum is not always the actual maximum. Many media have an actual total capacity that is slightly larger than the official amount."
"<p>If this option is checked K3b will disable a safety check that prevents burning beyond the official capacity."
"<p><b>Caution:</b> Enabling this option can cause failures in the end of the burning process if K3b attempts to write beyond the official capacity. It makes sense to first determine the actual maximum capacity of the media brand with a simulated burn."
msgstr ""
#. +> trunk5 stable5
#: option/k3badvancedoptiontab.cpp:125
#, kde-format
msgid "<p>If this option is checked K3b will automatically erase CD-RWs and format DVD-RWs if one is found instead of an empty media before writing."
msgstr ""
#. +> trunk5 stable5
#: option/k3badvancedoptiontab.cpp:129
#, kde-format
msgid ""
"<p>K3b uses a software buffer during the burning process to avoid gaps in the data stream due to high system load. The default sizes used are %1 MB for CD and %2 MB for DVD burning."
"<p>If this option is checked the value specified will be used for both CD and DVD burning."
msgstr ""
#. +> trunk5 stable5
#: option/k3badvancedoptiontab.cpp:135
#, kde-format
msgid ""
"<p>If this option is checked K3b will not eject the medium once the burn process finishes. This can be helpful in case one leaves the computer after starting the burning and does not want the tray to be open all the time."
"<p>However, on Linux systems a freshly burned medium has to be reloaded. Otherwise the system will not detect the changes and still treat it as an empty medium."
msgstr ""
#. +> trunk5 stable5
#: option/k3badvancedoptiontab.cpp:141
#, kde-format
msgid ""
"<p>If this option is checked K3b will continue in some situations which would otherwise be deemed as unsafe."
"<p>This setting for example disables the check for medium speed verification. Thus, one can force K3b to burn a high speed medium on a low speed writer."
"<p><b>Caution:</b> Enabling this option may result in damaged media."
msgstr ""
#. +> trunk5 stable5
#: option/k3bcddboptiontab.cpp:48
#, kde-format
msgid "Unable to load KCDDB configuration module."
msgid "Unable to execute the action: %1 (Error code: %2)"
msgstr ""
#. +> trunk5 stable5
#: option/k3bdevicewidget.cpp:291
#, kde-format
msgid "Retry"
msgstr ""
#. +> trunk5 stable5
#: option/k3bexternalbinmodel.cpp:164
#, kde-format
msgid "%1 (not found)"
msgstr ""
#. +> trunk5 stable5
#: option/k3bexternalbinmodel.cpp:237
#, kde-format
msgid "Path"
msgstr ""
#. +> trunk5 stable5
#: option/k3bexternalbinmodel.cpp:239
#, kde-format
msgid "Features"
msgstr ""
#. +> trunk5 stable5
#: option/k3bexternalbinoptiontab.cpp:36
#, kde-format
msgid "Specify the paths to the external programs that K3b needs to work properly, or press \"Refresh\" to let K3b search for the programs."
msgstr ""
#. +> trunk5 stable5
#: option/k3bexternalbinparamsmodel.cpp:166
#: option/k3bexternalbinpermissionmodel.cpp:293
#, kde-format
msgid "Program"
msgstr ""
#. +> trunk5 stable5
#: option/k3bexternalbinparamsmodel.cpp:167
#, kde-format
msgid "Parameters"
msgstr ""
#. +> trunk5 stable5
#: option/k3bexternalbinpermissionmodel.cpp:238
#, kde-format
msgid "no change"
msgstr ""
#. +> trunk5 stable5
#: option/k3bexternalbinpermissionmodel.cpp:294
#: option/k3bexternalbinwidget.cpp:136
#, kde-format
msgid "Permissions"
msgstr ""
#. +> trunk5 stable5
#: option/k3bexternalbinpermissionmodel.cpp:295
#, kde-format
msgid "New permissions"
msgstr ""
#. +> trunk5 stable5
#: option/k3bexternalbinwidget.cpp:81
#, kde-format
msgid "<p>If K3b finds more than one installed version of a program it will choose one as the <em>default</em>, which will be used to do the work. If you want to change the default, check desired version on the list."
"<p>If this option is checked, K3b will generate the System Use Sharing Protocol records (SUSP) specified by the Rock Ridge Interchange Protocol (IEEE-P1282).\n"
"<p>Rock Ridge extends the ISO 9660 filesystem by features equal to the UNIX filesystems (permissions, symbolic links, very long filenames, ...). It uses ISO-8859 or UTF-16 based characters and allows 255 octets.\n"
"<p>Rock Ridge extensions are located at the end of each ISO 9660 directory record. This makes the Rock Ridge tree closely coupled to the ISO 9660 tree.\n"
"<p><b>It is highly recommended to use Rock Ridge extensions on every data CD or DVD.</b>"
"<p>If this option is checked, K3b will add additional Joliet extensions to the ISO 9660 file system.\n"
"<p>Joliet is not an accepted independent international standard like ISO 9660 or Rock Ridge. It is mainly used on Windows systems.\n"
"<p>Joliet does not allow all characters, so the Joliet filenames are not identical to the filenames on disk (as compared to Rock Ridge). Joliet has a filename length limitation of 64 chars (independent from the character coding and type e.g. European vs. Japanese). This is inconvenient, as modern file systems all allow 255 characters per path name component.\n"
"<p>Joliet uses UTF-16 coding.\n"
"<p><b>Caution:</b> With the exception of Linux and FreeBSD, there is no POSIX-like OS that supports Joliet. So <b>never create Joliet-only CDs or DVDs</b> for that reason."
"<p>If this option is checked, all files in the resulting file system will have exactly the same permissions as the source files. (Otherwise, all files will have equal permissions and be owned by root).\n"
"<p>This is mainly useful for backups."
"<p><b>Caution:</b> The permissions may not make much sense on other file systems; for example, if a user that owns a file on the CD or DVD does not exist."
"<li>Level 1: Files may only consist of one section and filenames are restricted to 8.3 characters.</li>"
"\n"
"<li>Level 2: Files may only consist of one section.</li>"
"\n"
"<li>Level 3: No restrictions.</li>"
"\n"
"</ul>"
"\n"
"<p>With all ISO 9660 levels, all filenames are restricted to upper case letters, numbers and the underscore (_). The maximum filename length is 31 characters, the directory nesting level is restricted to 8 and the maximum path length is limited to 255 characters. (These restrictions may be violated with the additional ISO 9660 features K3b offers.)"
"<p>If this option is checked K3b uses some otherwise unused space on the Audio CD to store additional information, such as the artist's name or the CD title.\n"
"<p>CD-Text is an extension to the audio CD standard introduced by Sony.\n"
"<p>CD-Text will only be usable on CD players that support this extension (mostly car CD players) and software like K3b, of course.\n"
"<p>Since a CD-Text-enhanced Audio CD will work in any Hifi CD or DVD player even if the player does not support CD-Text explicitly, enabling it is never a bad idea (just remember to fill in the CD-Text information)."
msgid "<p>Preemphasis is mainly used in audio processing. Higher frequencies in audio signals usually have lower amplitudes. This can lead to bad signal quality on noisy transmission because the high frequencies might become too weak. To avoid this effect, high frequencies are amplified before transmission (preemphasis); the receiver will then weaken them accordingly for playback."
"<p>On an audio CD each track (except for the last) can have a post-gap.\n"
"This does not mean that K3b adds an additional gap of silence to the track. This setting simply influences the display on a Hifi audio CD player. The part of an audio track that is marked as post-gap is counted backwards.\n"
"<p>This setting is irrelevant for most users as modern CD burners can put arbitrary audio data in the post-gap when burning in DAO mode.\n"
"<p><i>In other CD-burning applications the post-gap might be called the pre-gap. The pre-gap of track 2 is the same as the post-gap of track 1.\n"
"<p><b>Changing the post-gap does not change the length of the track.</b>\n"
"<p><b>When writing in TAO writing mode (not recommended for Audio CDs) the post-gap will most likely be muted and on some burners forced to 2 seconds.</b>"
"<p>K3b can create ISO 9660 filesystems that contain symlinks if the Rock Ridge extensions are enabled (they are by default). You can change the way symlinks are handled in a K3b project.\n"
"\n"
"<p><b>No Change</b><br>"
"\n"
"Symlinks are used as they have been added to the project. \n"
"\n"
"<p><b>Discard broken symlinks</b><br>"
"\n"
"K3b will discard all symbolic links that do not point to a file inside the project. That includes all links to absolute paths like '/home/myhome/testfile'.\n"
"\n"
"<p><b>Discard all symlinks</b><br>"
"\n"
"K3b will discard all symbolic links that have been added to the project; meaning that the resulting file system will have no links at all.\n"
"\n"
"<p><b>Follow symlinks</b><br>"
"\n"
"Each symbolic link in the project will be replaced with the contents of the file it is pointing to. Thus, the resulting filesystem will not contain any symbolic links.<br>"
"\n"
"Be aware that in case Rock Ridge extensions are disabled (which is not recommended) symbolic links are always followed because ISO 9660 does not support symbolic links.\n"
"\n"
"<p><b>Caution:</b> Symbolic links require Rock Ridge extensions."
msgid "<p>If this option is checked the resulting eMovix CD/DVD will not use DMA for accessing the drive. This will slow down reading from the CD/DVD but may be necessary on some systems that do not support DMA.</p>"
"<p>During audio playback normally the screen would be black. However, if a background movie has been selected, eMovix will display it during playback.\n"
"<p>Additional background movies can be installed. However, this is not as simple as a few mouse clicks. The background movies are stored in the emovix shared data folder (mostly <i>/usr/share/emovix</i> or <i>/usr/local/share/emovix</i>) under <em>backgrounds</em>. So to add a background one has to copy the file to that folder."
"<p>eMovix provides a variety of different boot configurations which can be selected at boot time via a boot label (comparable to Lilo or Grub). The many different boot configurations mainly influence the Video output.\n"
"<p>The <b>default</b>, <b>movix</b>, or <b>MoviX</b> labels start a general Vesa video driver.\n"
"<p>The <b>TV</b> labels can be used to direct video to the TV output of the graphic board. eMovix provides TVout drivers for different brands of graphic boards.\n"
"<p>The <b>FB</b> labels refer to configurations that start a Frame Buffer driver in different screen resolutions.\n"
"<p>The <b>AA</b> labels make eMovix output the video through the ASCII-Art library which displays the picture in text mode through the usage of simple ASCII characters.\n"
"<p>The <b>hd</b> label makes eMovix boot from the local harddisk instead of the medium. This can be used to prevent accidental starting of an eMovix medium.\n"
"<p>The <b>floppy</b> label makes eMovix boot from the local floppy drive instead of the medium."
"<p>If this option is checked K3b will <em>hide</em> the first track."
"<p>The audio CD standard uses pregaps before every track on the CD. By default these last for 2 seconds and are silent. In DAO mode it is possible to have longer pregaps that contain some audio. In this case the first pregap will contain the complete first track."
"<p>You will need to seek back from the beginning of the CD to listen to the first track. Try it, it is quite amusing."
"<p><b>This feature is only available in DAO mode when writing with cdrdao."
"<p><b>External program <em>normalize</em> is not installed.</b>"
"<p>K3b uses <em>normalize</em> (http://normalize.nongnu.org/) to normalize audio tracks. In order to use this functionality, please install it first."
msgid "<p>K3b is not able to normalize audio tracks when burning on-the-fly. The external program used for this task only supports normalizing a set of audio files."
msgid "Drag the edges of the highlighted area to define the portion of the audio source you want to include in the Audio CD track. You can also use the input windows to fine-tune your selection."
msgid "Insufficient permissions to read the following files"
msgstr ""
#. +> trunk5 stable5
#: projects/k3baudiotrackaddingdialog.cpp:84
#: projects/k3bdataurladdingdialog.cpp:805
#, kde-format
msgid "Unable to find the following files"
msgstr ""
#. +> trunk5 stable5
#: projects/k3baudiotrackaddingdialog.cpp:88
#: projects/k3bdataurladdingdialog.cpp:809
#, kde-format
msgid "No non-local files supported"
msgstr ""
#. +> trunk5 stable5
#: projects/k3baudiotrackaddingdialog.cpp:92
#, kde-format
msgid "Unable to handle the following files due to an unsupported format"
msgstr ""
#. +> trunk5 stable5
#: projects/k3baudiotrackaddingdialog.cpp:93
#, kde-format
msgid "You may manually convert these audio files to wave using another application supporting the audio format and then add the wave files to the K3b project."
msgstr ""
#. +> trunk5 stable5
#: projects/k3baudiotrackaddingdialog.cpp:99
#: projects/k3bdataurladdingdialog.cpp:135
#, kde-format
msgid "Problems while adding files to the project."
"<p>The file you selected is not a floppy image (floppy images are of size 1200 KB, 1440 KB, or 2880 KB). You may still use boot images of other sizes by emulating a harddisk or disabling emulation completely. "
"<p>If you are not familiar with terms like 'harddisk emulation' you most likely want to use a floppy image here. Floppy images can be created by directly extracting them from a real floppy disk:"
"<pre>dd if=/dev/floppy of=/tmp/floppy.img</pre>"
"or by using one of the many boot floppy generators that can be found on <a href=\"http://www.google.com/search?q=linux+boot+floppy&ie=UTF-8&oe=UTF-8\">the Internet</a>."
msgid "Most writers do not support writing multisession CDs in DAO mode."
msgstr ""
#. +> trunk5 stable5
#: projects/k3bdataburndialog.cpp:258
#, kde-format
msgid "It is not possible to write multisession media in DAO mode. Multisession has been disabled."
msgstr ""
#. +> trunk5 stable5
#: projects/k3bdataburndialog.cpp:260
#, kde-format
msgid "Multisession Problem"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bdataimagesettingswidget.cpp:40
#, kde-format
msgid "Linux/Unix only"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bdataimagesettingswidget.cpp:41
#, kde-format
msgid "Linux/Unix + Windows"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bdataimagesettingswidget.cpp:42
#, kde-format
msgid "Very large files (UDF)"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bdataimagesettingswidget.cpp:43
#, kde-format
msgid "DOS Compatibility"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bdataimagesettingswidget.cpp:44
#: rip/videodvd/k3bvideodvdrippingwidget.cpp:70
#, kde-format
msgid "Custom"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bdataimagesettingswidget.cpp:96
#, kde-format
msgctxt "This is the default volume identifier of a data project created by K3b. The string should not be longer than 16 characters to avoid warnings regarding Joiliet extensions which induce this restriction."
msgid "K3b data project"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bdataimagesettingswidget.cpp:150
#, kde-format
msgid ""
"<p><b>File System Presets</b>"
"<p>K3b provides the following file system Presets which allow for a quick selection of the most frequently used settings."
msgstr ""
#. +> trunk5 stable5
#: projects/k3bdataimagesettingswidget.cpp:154
#, kde-format
msgid "The file system is optimized for usage on Linux/Unix systems. This mainly means that it uses the Rock Ridge extensions to provide long filenames, symbolic links, and POSIX compatible file permissions."
msgstr ""
#. +> trunk5 stable5
#: projects/k3bdataimagesettingswidget.cpp:158
#, kde-format
msgid "In addition to the settings for Linux/Unix the file system contains a Joliet tree which allows for long file names on Windows which does not support the Rock Ridge extensions. Be aware that the file name length is restricted to 103 characters."
msgstr ""
#. +> trunk5 stable5
#: projects/k3bdataimagesettingswidget.cpp:162
#, kde-format
msgid "The file system has additional UDF entries attached to it. This raises the maximal file size to 4 GB. Be aware that the UDF support in K3b is limited."
msgstr ""
#. +> trunk5 stable5
#: projects/k3bdataimagesettingswidget.cpp:165
#, kde-format
msgid "The file system is optimized for compatibility with old systems. That means file names are restricted to 8.3 characters and no symbolic links or file permissions are supported."
msgstr ""
#. +> trunk5 stable5
#: projects/k3bdataimagesettingswidget.cpp:220
#, kde-format
msgid "Rock Ridge"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bdataimagesettingswidget.cpp:222
#, kde-format
msgid "Joliet"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bdataimagesettingswidget.cpp:224
#, kde-format
msgid "UDF"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bdataimagesettingswidget.cpp:226
#, kde-format
msgid "Custom (ISO 9660 only)"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bdataimagesettingswidget.cpp:228
#, kde-format
msgid "Custom (%1)"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bdataimagesettingswidget.cpp:245
#, kde-format
msgid ""
"<p>Be aware that it is not recommended to disable the Rock Ridge Extensions. There is no disadvantage in enabling Rock Ridge (except for a very small space overhead) but a lot of advantages."
"<p>Without Rock Ridge Extensions symbolic links are not supported and will always be followed as if the \"Follow Symbolic Links\" option was enabled."
msgstr ""
#. +> trunk5 stable5
#: projects/k3bdataimagesettingswidget.cpp:251
#, kde-format
msgid "Rock Ridge Extensions Disabled"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bdataimagesettingswidget.cpp:257
#, kde-format
msgid ""
"<p>Be aware that without the Joliet extensions Windows systems will not be able to display long filenames. You will only see the ISO 9660 filenames."
"<p>If you do not intend to use the CD/DVD on a Windows system it is safe to disable Joliet."
msgstr ""
#. +> trunk5 stable5
#: projects/k3bdataimagesettingswidget.cpp:262
#, kde-format
msgid "Joliet Extensions Disabled"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bdatamultisessioncombobox.cpp:36
#, kde-format
msgid "Select the Multisession Mode for the project."
msgstr ""
#. +> trunk5 stable5
#: projects/k3bdatamultisessioncombobox.cpp:37
#, kde-format
msgid ""
"<p><b>Multisession Mode</b>"
"<p><b>Auto</b><br>"
"Let K3b decide which mode to use. The decision will be based on the size of the project (does it fill the whole media) and the state of the inserted media (appendable or not)."
"<p><b>No Multisession</b><br>"
"Create a single-session CD or DVD and close the disk."
"<p><b>Start Multisession</b><br>"
"Start a multisession CD or DVD, not closing the disk to allow further sessions to be appended."
"<p><b>Continue Multisession</b><br>"
"Continue an appendable data CD (as for example created in <em>Start Multisession</em> mode) and add another session without closing the disk to allow further sessions to be appended."
"<p><b>Finish Multisession</b><br>"
"Continue an appendable data CD (as for example created in <em>Start Multisession</em> mode), add another session, and close the disk."
"<p><em>In the case of DVD+RW and DVD-RW restricted overwrite media K3b will not actually create multiple sessions but grow the file system to include the new data.</em>"
"<p>K3b found session containing Joliet information for long filenames but no Rock Ridge extensions."
"<p>The filenames in the imported session will be converted to a restricted character set in the new session. This character set is based on the ISO 9660 settings in the K3b project. K3b is not able to display these converted filenames yet."
msgid "Hide this file in the RockRidge filesystem"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bdatapropertiesdialog.cpp:161
#, kde-format
msgid "Hide this file in the Joliet filesystem"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bdatapropertiesdialog.cpp:162
#, kde-format
msgid "Modify the physical sorting"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bdatapropertiesdialog.cpp:163
#, kde-format
msgid ""
"<p>If this option is checked, the file or folder (and its entire contents) will be hidden on the ISO 9660 and RockRidge filesystem.</p>"
"<p>This is useful, for example, for having different README files for RockRidge and Joliet, which can be managed by hiding README.joliet on RockRidge and README.rr on the Joliet filesystem.</p>"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bdatapropertiesdialog.cpp:170
#, kde-format
msgid ""
"<p>If this option is checked, the file or folder (and its entire contents) will be hidden on the Joliet filesystem.</p>"
"<p>This is useful, for example, for having different README files for RockRidge and Joliet, which can be managed by hiding README.joliet on RockRidge and README.rr on the Joliet filesystem.</p>"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bdatapropertiesdialog.cpp:177
#, kde-format
msgid ""
"<p>This value modifies the physical sort order of the files in the ISO 9660 filesystem. A higher weighting means that the file will be located closer to the beginning of the image (and the disk)."
"<p>This option is useful in order to optimize the data layout on a medium."
"<p><b>Caution:</b> This does not sort the order of the file names that appear in the ISO 9660 folder. It sorts the order in which the file data is written to the image."
msgstr ""
#. +> trunk5 stable5
#: projects/k3bdatapropertiesdialog.cpp:208
#: projects/k3bmovixprojectmodel.cpp:271
#, kde-format
msgid "Link to %1"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bdatapropertiesdialog.cpp:223
#, kde-format
msgid "Folder"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bdatapropertiesdialog.cpp:232
#, kde-format
msgid "in one file"
msgid_plural "in %1 files"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: projects/k3bdatapropertiesdialog.cpp:233
#, kde-format
msgid "and one folder"
msgid_plural "and %1 folders"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: projects/k3bdatapropertiesdialog.cpp:237
#, kde-format
msgid "Special file"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bdatapropertiesdialog.cpp:301
#, kde-format
msgid "One Item"
msgid_plural "%1 Items"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: projects/k3bdatapropertiesdialog.cpp:304
#, kde-format
msgid "One File"
msgid_plural "%1 Files"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: projects/k3bdatapropertiesdialog.cpp:306
#, kde-format
msgid "No Files"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bdatapropertiesdialog.cpp:309
#, kde-format
msgid "One Folder"
msgid_plural "%1 Folders"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: projects/k3bdatapropertiesdialog.cpp:311
#, kde-format
msgid "No Folders"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bdataurladdingdialog.cpp:69
#, kde-format
msgid "Moving files to project \"%1\"..."
msgstr ""
#. +> trunk5 stable5
#: projects/k3bdataurladdingdialog.cpp:100
#, kde-format
msgid "Adding files to project '%1'"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bdataurladdingdialog.cpp:106
#, kde-format
msgid "Adding files to project '%1'..."
msgstr ""
#. +> trunk5 stable5
#: projects/k3bdataurladdingdialog.cpp:187
#, kde-format
msgid ""
"<p>The file you are about to add to the project is an ISO 9660 image. As such it can be burned to a medium directly since it already contains a file system.<br>"
"Are you sure you want to add this file to the project?"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bdataurladdingdialog.cpp:191
#, kde-format
msgid "Adding image file to project"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bdataurladdingdialog.cpp:192
#, kde-format
msgid "Add the file to the project"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bdataurladdingdialog.cpp:193
#, kde-format
msgid "Burn the image directly"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bdataurladdingdialog.cpp:388
#: projects/k3bdataurladdingdialog.cpp:620
#, kde-format
msgid "File already exists"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bdataurladdingdialog.cpp:389
#: projects/k3bdataurladdingdialog.cpp:621
#, kde-format
msgid "<p>File <em>%1</em> already exists in project folder <em>%2</em>."
"<p>If you intend to make K3b follow symbolic links you should consider letting K3b do this now since K3b will not be able to do so afterwards because symbolic links to folders inside a K3b project cannot be resolved."
"<p><b>If you do not intend to enable the option <em>follow symbolic links</em> you may safely ignore this warning and choose to add the link to the project.</b>"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bdataurladdingdialog.cpp:463
#, kde-format
msgid "Follow link now"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bdataurladdingdialog.cpp:464
#, kde-format
msgid "Always follow links"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bdataurladdingdialog.cpp:465
#, kde-format
msgid "Add link to project"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bdataurladdingdialog.cpp:466
#, kde-format
msgid "Always add links"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bdataurladdingdialog.cpp:751
#, kde-format
msgid "Enter New Filename"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bdataurladdingdialog.cpp:752
#, kde-format
msgid "A file with that name already exists. Please enter a new name:"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bdataurladdingdialog.cpp:769
#, kde-format
msgid "Do you also want to add hidden files?"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bdataurladdingdialog.cpp:770
#, kde-format
msgid "Hidden Files"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bdataurladdingdialog.cpp:770
#: projects/k3bdataurladdingdialog.cpp:786
#, kde-format
msgid "Do Not Add"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bdataurladdingdialog.cpp:784
#, kde-format
msgid "Do you also want to add system files (FIFOs, sockets, device files, and broken symlinks)?"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bdataurladdingdialog.cpp:786
#, kde-format
msgid "System Files"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bdataurladdingdialog.cpp:813
#, kde-format
msgid "To burn files bigger than %1 please use %2"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bdataurladdingdialog.cpp:818
#, kde-format
msgid "Some filenames had to be modified due to limitations in mkisofs"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bdataurladdingdialog.cpp:822
#, kde-format
msgid "The following filenames have an invalid encoding. You may fix this with the convmv tool"
"<p><b>Why does K3b offer 4.4 GB and 8.0 GB instead of 4.7 and 8.5 like it says on the media?</b>"
"<p>A single layer DVD media has a capacity of approximately 4.4 GB which equals 4.4*1024<sup>3</sup> bytes. Media producers just calculate with 1000 instead of 1024 for advertising reasons.<br>"
"This results in 4.4*1024<sup>3</sup>/1000<sup>3</sup> = 4.7 GB."
msgstr ""
#. +> trunk5 stable5
-#: projects/k3bfillstatusdisplay.cpp:586
+#: projects/k3bfillstatusdisplay.cpp:590
#, kde-format
msgid "GB"
msgstr ""
#. +> trunk5 stable5
-#: projects/k3bfillstatusdisplay.cpp:588
+#: projects/k3bfillstatusdisplay.cpp:592
#, kde-format
msgid "min"
msgstr ""
#. +> trunk5 stable5
-#: projects/k3bfillstatusdisplay.cpp:605
+#: projects/k3bfillstatusdisplay.cpp:609
#, kde-format
msgid "Custom Size"
msgstr ""
#. +> trunk5 stable5
-#: projects/k3bfillstatusdisplay.cpp:606
+#: projects/k3bfillstatusdisplay.cpp:610
#, kde-format
msgid "<p>Please specify the size of the medium. Use suffixes <b>GB</b>,<b>MB</b>, and <b>min</b> for <em>gigabytes</em>, <em>megabytes</em>, and <em>minutes</em> respectively."
msgstr ""
#. +> trunk5 stable5
-#: projects/k3bfillstatusdisplay.cpp:664
+#: projects/k3bfillstatusdisplay.cpp:668
#, kde-format
msgid "Medium is not empty."
msgstr ""
#. +> trunk5 stable5
-#: projects/k3bfillstatusdisplay.cpp:667
+#: projects/k3bfillstatusdisplay.cpp:671
#, kde-format
msgid "No usable medium found."
msgstr ""
#. +> trunk5 stable5
-#: projects/k3bfillstatusdisplay.cpp:856
+#: projects/k3bfillstatusdisplay.cpp:860
#, kde-format
msgid "Right click for media sizes"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bmixedburndialog.cpp:62
#, kde-format
msgid "Mixed Project"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bmixedburndialog.cpp:98
#, kde-format
msgid "Mixed Mode Type"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bmixedburndialog.cpp:102
#, kde-format
msgid "Data in second session (CD-Extra)"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bmixedburndialog.cpp:103
#, kde-format
msgid ""
"<em>Blue book CD</em><br>"
"K3b will create a multisession CD with 2 sessions. The first session will contain all audio tracks and the second session will contain a mode 2 form 1 data track.<br>"
"This mode is based on the <em>Blue book</em> standard (also known as <em>Extended Audio CD</em>, <em>CD-Extra</em>, or <em>CD Plus</em>) and has the advantage that a hifi audio CD player will only recognize the first session and ignore the second session with the data track.<br>"
"If the CD is intended to be used in a hifi audio CD player this is the recommended mode.<br>"
"Some older CD-ROMs may have problems reading a blue book CD since it is a multisession CD."
msgstr ""
#. +> trunk5 stable5
#: projects/k3bmixedburndialog.cpp:119
#, kde-format
msgid "Data in first track"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bmixedburndialog.cpp:120
#, kde-format
msgid "K3b will write the data track before all audio tracks."
msgstr ""
#. +> trunk5 stable5
#: projects/k3bmixedburndialog.cpp:123
#, kde-format
msgid "Data in last track"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bmixedburndialog.cpp:124
#, kde-format
msgid "K3b will write the data track after all audio tracks."
msgstr ""
#. +> trunk5 stable5
#: projects/k3bmixedburndialog.cpp:127
#, kde-format
msgid ""
"<b>Caution:</b> The last two modes should only be used for CDs that are unlikely to be played on a hifi audio CD player.<br>"
"It could lead to problems with some older hifi audio CD players that try to play the data track."
msgstr ""
#. +> trunk5 stable5
#: projects/k3bmixedview.cpp:56
#, kde-format
msgid "Audio Section"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bmixedview.cpp:57
#, kde-format
msgid "Data Section"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bmixedview.cpp:133
#, kde-format
msgid "Please add files and audio titles to your project first."
msgstr ""
#. +> trunk5 stable5
#: projects/k3bmovixburndialog.cpp:55
#, kde-format
msgid "eMovix Project"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bmovixburndialog.cpp:56
#, kde-format
msgid "One file (%2)"
msgid_plural "%1 files (%2)"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: projects/k3bmovixburndialog.cpp:59
#, kde-format
msgid "eMovix"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bmovixburndialog.cpp:103
#, kde-format
msgid "Multisession"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bmovixburndialog.cpp:199
#, kde-format
msgid "Could not find a valid eMovix installation."
msgid "Playback control, PBC, is available for Video CD 2.0 and Super Video CD 1.0 disc formats."
msgstr ""
#. +> trunk5 stable5
#: projects/k3bvcdburndialog.cpp:120
#, kde-format
msgid "Add always an empty `/SEGMENT' folder"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bvcdburndialog.cpp:121
#, kde-format
msgid "This controls whether APS constraints are strict or relaxed. "
msgstr ""
#. +> trunk5 stable5
#: projects/k3bvcdburndialog.cpp:122
#, kde-format
msgid "This controls whether to update the scan data information contained in the MPEG-2 video streams."
msgstr ""
#. +> trunk5 stable5
#: projects/k3bvcdburndialog.cpp:123
#, kde-format
msgid "This element allows to set viewing restrictions which may be interpreted by the playing device."
msgstr ""
#. +> trunk5 stable5
#: projects/k3bvcdburndialog.cpp:125
#, kde-format
msgid "This option allows customization of Gaps and Margins."
msgstr ""
#. +> trunk5 stable5
#: projects/k3bvcdburndialog.cpp:126
#, kde-format
msgid "Used to set the number of empty sectors added before the lead-out area begins."
msgstr ""
#. +> trunk5 stable5
#: projects/k3bvcdburndialog.cpp:127
#, kde-format
msgid "Used to set the track pre-gap for all tracks in sectors globally."
msgstr ""
#. +> trunk5 stable5
#: projects/k3bvcdburndialog.cpp:128
#, kde-format
msgid "Sets the front margin for sequence items."
msgstr ""
#. +> trunk5 stable5
#: projects/k3bvcdburndialog.cpp:129
#, kde-format
msgid "Sets the rear margin for sequence items."
msgstr ""
#. +> trunk5 stable5
#: projects/k3bvcdburndialog.cpp:133
#, kde-format
msgid ""
"<p>This is the most basic <b>Video CD</b> specification dating back to 1993, which has the following characteristics:"
"<ul>"
"<li>One mode2 mixed form ISO 9660 track containing file pointers to the information areas.</li>"
"<li>Up to 98 multiplex-ed MPEG-1 audio/video streams or CD-DA audio tracks.</li>"
"<li>Up to 500 MPEG sequence entry points used as chapter divisions.</li>"
"</ul>"
"<p>The Video CD specification requires the multiplex-ed MPEG-1 stream to have a CBR of less than 174300 bytes (1394400 bits) per second in order to accommodate single speed CD-ROM drives.<br>"
"The specification allows for the following two resolutions:"
"<ul>"
"<li>352 x 240 @ 29.97 Hz (NTSC SIF).</li>"
"<li>352 x 240 @ 23.976 Hz (FILM SIF).</li>"
"</ul>"
"<p>The CBR MPEG-1, layer II audio stream is fixed at 224 kbps with 1 stereo or 2 mono channels."
"<p><b>It is recommended to keep the video bit-rate under 1151929.1 bps.</b>"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bvcdburndialog.cpp:144
#, kde-format
msgid ""
"<p>About two years after the Video CD 1.1 specification came out, an improved <b>Video CD 2.0</b> standard was published in 1995."
"<p>This one added the following items to the features already available in the Video CD 1.1 specification:"
"<ul>"
"<li>Support for MPEG segment play items (<b>\"SPI\"</b>), consisting of still pictures, motion pictures and/or audio (only) streams was added.</li>"
"<li>Note Segment Items::.</li>"
"<li>Support for interactive playback control (<b>\"PBC\"</b>) was added.</li>"
"<li>Support for playing related access by providing a scan point index file was added. (<b>\"/EXT/SCANDATA.DAT\"</b>)</li>"
"<li>Support for closed captions.</li>"
"<li>Support for mixing NTSC and PAL content.</li>"
"</ul>"
"<p>By adding PAL support to the Video CD 1.1 specification, the following resolutions became available:"
"<ul>"
"<li>352 x 240 @ 29.97 Hz (NTSC SIF).</li>"
"<li>352 x 240 @ 23.976 Hz (FILM SIF).</li>"
"<li>352 x 288 @ 25 Hz (PAL SIF).</li>"
"</ul>"
"<p>For segment play items the following audio encodings became available:"
"<ul>"
"<li>Joint stereo, stereo or dual channel audio streams at 128, 192, 224 or 384 kbit/sec bit-rate.</li>"
"<li>Mono audio streams at 64, 96 or 192 kbit/sec bit-rate.</li>"
"</ul>"
"<p>Also the possibility to have audio only streams and still pictures was provided."
"<p><b>The bit-rate of multiplex-ed streams should be kept under 174300 bytes/sec (except for single still picture items) in order to accommodate single speed drives.</b>"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bvcdburndialog.cpp:162
#, kde-format
msgid ""
"<p>With the upcoming of the DVD-V media, a new VCD standard had to be published in order to be able to keep up with technology, so the Super Video CD specification was called into life 1999."
"<p>In the midst of 2000 a full subset of this <b>Super Video CD</b> specification was published as <b>IEC-62107</b>."
"<p>As the most notable change over Video CD 2.0 is a switch from MPEG-1 CBR to MPEG-2 VBR encoding for the video stream was performed."
"<p>The following new features--building upon the Video CD 2.0 specification--are:"
"<ul>"
"<li>Use of MPEG-2 encoding instead of MPEG-1 for the video stream.</li>"
"<li>Allowed VBR encoding of MPEG-1 audio stream.</li>"
"<li>Higher resolutions (see below) for video stream resolution.</li>"
"<li>Up to 4 overlay graphics and text (<b>\"OGT\"</b>) sub-channels for user switchable subtitle displaying in addition to the already existing closed caption facility.</li>"
"<li>Command lists for controlling the SVCD virtual machine.</li>"
"</ul>"
"<p>For the <b>Super Video CD</b>, only the following two resolutions are supported for motion video and (low resolution) still pictures:"
"<ul>"
"<li>480 x 480 @ 29.97 Hz (NTSC 2/3 D-2).</li>"
"<li>480 x 576 @ 25 Hz (PAL 2/3 D-2).</li>"
"</ul>"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bvcdburndialog.cpp:175
#, kde-format
msgid ""
"<p>This is actually just a minor variation defined in IEC-62107 on the Super Video CD 1.0 format for compatibility with current products in the market."
"<p>It differs from the Super Video CD 1.0 format in the following items:"
"<ul>"
"<li>The system profile tag field in <b>/SVCD/INFO.SVD</b> is set to <b>1</b> instead of <b>0</b>.</li>"
"<li>The system identification field value in <b>/SVCD/INFO.SVD</b> is set to <b>HQ-VCD</b> instead of <b>SUPERVCD</b>.</li>"
"<li><b>/EXT/SCANDATA.DAT</b> is mandatory instead of being optional.</li>"
"<li><b>/SVCD/SEARCH.DAT</b> is optional instead of being mandatory.</li>"
"</ul>"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bvcdburndialog.cpp:182
#, kde-format
msgid ""
"<p>If Autodetect is:</p>"
"<ul>"
"<li>ON then K3b will set the correct Video CD type.</li>"
"<li>OFF then the correct Video CD type needs to be set by the user.</li>"
"</ul>"
"<p>If you are not sure about the correct Video CD type, it is best to turn Autodetect ON.</p>"
"<p>If you want to force the Video CD type, you must turn Autodetect OFF. This is useful for some standalone DVD players without SVCD support.</p>"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bvcdburndialog.cpp:188
#, kde-format
msgid ""
"<ul>"
"<li>Rename <b>\"/MPEG2\"</b> folder on SVCDs to (non-compliant) \"/MPEGAV\".</li>"
"<li>Enables the use of the (deprecated) signature <b>\"ENTRYSVD\"</b> instead of <b>\"ENTRYVCD\"</b> for the file <b>\"/SVCD/ENTRY.SVD\"</b>.</li>"
"</ul>"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bvcdburndialog.cpp:190
#, kde-format
msgid ""
"<ul>"
"<li>Enables the use of the (deprecated) Chinese <b>\"/SVCD/TRACKS.SVD\"</b> format which differs from the format defined in the <b>IEC-62107</b> specification.</li>"
"</ul>"
"<p><b>The differences are most exposed on SVCDs containing more than one video track.</b>"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bvcdburndialog.cpp:193
#, kde-format
msgid ""
"<p>though most devices will have problems with such an out-of-specification media."
"<p><b>You may want use this option for images longer than 80 minutes</b>"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bvcdburndialog.cpp:196
#, kde-format
msgid ""
"<p>To allow the play of Video-CDs on a CD-i player, the Video-CD standard requires that a CD-i application program must be present."
"<p>This program is designed to:"
"<ul>"
"<li>provide full play back control as defined in the PSD of the standard</li>"
"<li>be extremely simple to use and easy-to-learn for the end-user</li>"
"</ul>"
"<p>The program runs on CD-i players equipped with the CDRTOS 1.1(.1) operating system and a Digital Video extension cartridge."
msgstr ""
#. +> trunk5 stable5
#: projects/k3bvcdburndialog.cpp:202
#, kde-format
msgid ""
"<p>Configuration parameters only available for Video CD 2.0"
"<p>The engine works perfectly well when used as-is."
"<p>You have the option to configure the VCD application."
"<p>You can adapt the color and/or the shape of the cursor and lots more."
"<p>Playback control, PBC, is available for Video CD 2.0 and Super Video CD 1.0 disc formats."
"<p>PBC allows control of the playback of play items and the possibility of interaction with the user through the remote control or some other input device available."
msgstr ""
#. +> trunk5 stable5
#: projects/k3bvcdburndialog.cpp:211
#, kde-format
msgid ""
"<p>Here you can specify that the folder <b>SEGMENT</b> should always be present."
"<p>Some DVD players need the folder to give a faultless rendition."
msgstr ""
#. +> trunk5 stable5
#: projects/k3bvcdburndialog.cpp:214
#, kde-format
msgid ""
"<p>An Access Point Sector, APS, is an MPEG video sector on the VCD/SVCD which is suitable to be jumped to directly."
"<p>APS are required for entry points and scantables. APS have to fulfil the requirement to precede every I-frame by a GOP header which shall be preceded by a sequence header in its turn."
"<p>The start codes of these 3 items are required to be contained all in the same MPEG pack/sector, thus forming a so-called access point sector."
"<p>This requirement can be relaxed by enabling the relaxed aps option, i.e. every sector containing an I-frame will be regarded as an APS."
"<p><b>Warning:</b> The sequence header is needed for a playing device to figure out display parameters, such as display resolution and frame rate, relaxing the aps requirement may lead to non-working entry points."
msgstr ""
#. +> trunk5 stable5
#: projects/k3bvcdburndialog.cpp:220
#, kde-format
msgid ""
"<p>According to the specification, it is mandatory for Super Video CDs to encode scan information data into user data blocks in the picture layer of all intra coded picture."
"<p>It can be used by playing devices for implementing fast forward & fast reverse scanning."
"<p>The already existing scan information data can be updated by enabling the update scan offsets option."
msgstr ""
#. +> trunk5 stable5
#: projects/k3bvcdburndialog.cpp:224
#, kde-format
msgid ""
"<p>Viewing Restriction may be interpreted by the playing device."
"<p>The allowed range goes from 0 to 3."
"<ul>"
"<li>0 = unrestricted, free to view for all</li>"
"<li>3 = restricted, content not suitable for ages under 18</li>"
"</ul>"
"<p>Actually, the exact meaning is not defined and is player dependant."
"<p><b>Most players ignore that value.<b>"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bvcdburndialog.cpp:231
#, kde-format
msgid "<p>This option allows customization of Gaps and Margins."
msgstr ""
#. +> trunk5 stable5
#: projects/k3bvcdburndialog.cpp:232
#, kde-format
msgid ""
"<p>This option allows to set the number of empty sectors added before the lead-out area begins, i.e. the number of post-gap sectors."
"<p>The ECMA-130 specification requires the last data track before the lead-out to carry a post-gap of at least 150 sectors, which is used as default for this parameter."
"<p>Some operating systems may encounter I/O errors due to read-ahead issues when reading the last MPEG track if this parameter is set too low."
"<p>Allowed value content: [0..300]. Default: 150."
msgstr ""
#. +> trunk5 stable5
#: projects/k3bvcdburndialog.cpp:237
#, kde-format
msgid ""
"<p>Used to set the track pre-gap for all tracks in sectors globally."
"<p>The specification requires the pre-gaps to be at least 150 sectors long."
"<p>Allowed value content: [0..300]. Default: 150."
msgstr ""
#. +> trunk5 stable5
#: projects/k3bvcdburndialog.cpp:241
#, kde-format
msgid ""
"Margins are used to compensate for inaccurate sector-addressing issues on CD-ROM media. Interestingly, they have been abandoned for Super Video CDs."
"<p>For Video CD 1.0/1.1/2.0 this margin should be at least 15 sectors long."
"<p>Allowed value content: [0..150]. Default: 30 for Video CD 1.0/1.1/2.0, otherwise (i.e. Super Video CD 1.0 and HQ-VCD 1.0) 0."
msgstr ""
#. +> trunk5 stable5
#: projects/k3bvcdburndialog.cpp:245
#, kde-format
msgid ""
"<p>Margins are used to compensate for inaccurate sector-addressing issues on CD-ROM media. Interestingly, they have been abandoned for Super Video CDs."
"<p>For Video CD 1.0/1.1/2.0 this margin should be at least 15 sectors long."
"<p>Allowed value content: [0..150]. Default: 45 for Video CD 1.0/1.1/2.0, otherwise 0."
msgid "May also look like | << on the remote control. "
msgstr ""
#. +> trunk5 stable5
#: projects/k3bvcdtrackdialog.cpp:246
#, kde-format
msgid "May also look like >> | on the remote control."
msgstr ""
#. +> trunk5 stable5
#: projects/k3bvcdtrackdialog.cpp:247
#, kde-format
msgid "This key may be mapped to the STOP key."
msgstr ""
#. +> trunk5 stable5
#: projects/k3bvcdtrackdialog.cpp:248
#, kde-format
msgid "This key is usually mapped to the > or PLAY key."
msgstr ""
#. +> trunk5 stable5
#: projects/k3bvcdtrackdialog.cpp:249
#, kde-format
msgid "Target to be jumped to on time-out of <wait>."
msgstr ""
#. +> trunk5 stable5
#: projects/k3bvcdtrackdialog.cpp:250
#, kde-format
msgid "Delay reactivity of keys."
msgstr ""
#. +> trunk5 stable5
#: projects/k3bvcdtrackdialog.cpp:252
#, kde-format
msgid "Activate the use of numeric keys."
msgstr ""
#. +> trunk5 stable5
#: projects/k3bvcdtrackdialog.cpp:253
#, kde-format
msgid "Overwrite default numeric keys."
msgstr ""
#. +> trunk5 stable5
#: projects/k3bvcdtrackdialog.cpp:254
#, kde-format
msgid "Numeric keys."
msgstr ""
#. +> trunk5 stable5
#: projects/k3bvcdtrackdialog.cpp:255
#, kde-format
msgid "Times to repeat the playback of 'play track'."
msgstr ""
#. +> trunk5 stable5
#: projects/k3bvcdtrackdialog.cpp:256
#, kde-format
msgid "Time in seconds to wait after playback of 'play track'."
msgstr ""
#. +> trunk5 stable5
#: projects/k3bvcdtrackdialog.cpp:258
#, kde-format
msgid ""
"<p>Target to be jumped to on time-out of <wait>."
"<p>If omitted (and <wait> is not set to an infinite time) one of the targets is selected at random."
msgstr ""
#. +> trunk5 stable5
#: projects/k3bvcdtrackdialog.cpp:260
#, kde-format
msgid ""
"<p>When reactivity is set to delayed, it is recommended that the length of the referenced 'play track' is not more than 5 seconds."
"<p>The recommended setting for a play item consisting of one still picture and no audio is to loop once and have a delayed reactivity."
msgstr ""
#. +> trunk5 stable5
#: projects/k3bvcdtrackdialog.cpp:264
#, kde-format
msgid "These are actually pseudo keys, representing the numeric keys 0, 1, ..., 9."
msgstr ""
#. +> trunk5 stable5
#: projects/k3bvcdtrackdialog.cpp:265
#, kde-format
msgid "<p>If numeric keys enabled, you can overwrite the default settings."
msgstr ""
#. +> trunk5 stable5
#: projects/k3bvcdtrackdialog.cpp:266
#, kde-format
msgid ""
"<p>Times to repeat the playback of 'play track'."
"<p>The reactivity attribute controls whether the playback of 'play track' is finished, thus delayed, before executing user triggered action or an immediate jump is performed."
"<p>After the specified number of repetitions have completed, the <wait> time begins to count down, unless set to an infinite wait time."
"<p>If this element is omitted, a default of `1' is used, i.e. the 'play track' will be displayed once."
msgstr ""
#. +> trunk5 stable5
#: projects/k3bvcdtrackdialog.cpp:270
#, kde-format
msgid "Time in seconds to wait after playback of 'play track' before triggering the <timeout> action (unless the user triggers some action before time ran up)."
msgstr ""
#. +> trunk5 stable5
#: projects/k3bvcdtrackdialog.cpp:311
#, kde-format
msgid "Event Disabled"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bvcdtrackdialog.cpp:382
#, kde-format
msgid "File Info"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bvcdtrackdialog.cpp:394
#, kde-format
msgid "Length:"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bvcdtrackdialog.cpp:395
#, kde-format
msgid "Muxrate:"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bvcdtrackdialog.cpp:454
#, kde-format
msgid "Enable playback control (for the whole CD)"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bvcdtrackdialog.cpp:455
#, kde-format
msgid "Use numeric keys"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bvcdtrackdialog.cpp:457
#, kde-format
msgid "Reactivity delayed to the end of playing track"
msgid "Could not find VcdImager executable. To create Video CDs you have to install VcdImager >= 0.7.12. You can find this on your distribution’s software repository or download it from http://www.vcdimager.org"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bvideodvdburndialog.cpp:47
#, kde-format
msgid "Video DVD Project"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bvideodvdview.cpp:59
#, kde-format
msgid "Be aware that you need to provide the complete Video DVD filestructure. K3b does not support video transcoding and preparation of video object files yet. That means you need to already have the VTS_X_YY.VOB and VTS_X_YY.IFO files."
msgstr ""
#. +> trunk5 stable5
#: projects/k3bvideodvdview.cpp:63
#, kde-format
msgid "K3b Video DVD Restrictions"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bview.cpp:52
#, kde-format
msgid "&Burn"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bview.cpp:54
#, kde-format
msgid "Open the burn dialog for the current project"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bview.cpp:55
#, kde-format
msgid "&Properties"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bview.cpp:57
#, kde-format
msgid "Open the properties dialog"
msgstr ""
#. +> trunk5 stable5
#: projects/k3bvolumenamewidget.cpp:57
#, kde-format
msgid "Volume Name:"
msgstr ""
#. +> trunk5 stable5
#: projects/kostore/KoStore.cpp:210
#, kde-format
msgid "The directory mode is not supported for remote locations."
msgid "Unrecoverable error while ripping track %1."
msgstr ""
#. +> trunk5 stable5
#: rip/k3baudioripjob.cpp:194
#, kde-format
msgid "Ripping Audio Tracks"
msgstr ""
#. +> trunk5 stable5
#: rip/k3baudioripjob.cpp:196
#, kde-format
msgid "Ripping Audio Tracks From '%1'"
msgstr ""
#. +> trunk5 stable5
#: rip/k3baudioripjob.cpp:226
#, kde-format
msgid "Extracting Digital Audio"
msgstr ""
#. +> trunk5 stable5
#: rip/k3baudioripjob.cpp:233
#, kde-format
msgid "Could not load libcdparanoia."
msgstr ""
#. +> trunk5 stable5
#: rip/k3baudioripjob.cpp:244
#, kde-format
msgid "Reading CD table of contents."
msgstr ""
#. +> trunk5 stable5
#: rip/k3baudioripjob.cpp:248
#, kde-format
msgid "Could not open device %1"
msgstr ""
#. +> trunk5 stable5
#: rip/k3baudioripjob.cpp:261
#, kde-format
msgid "Searching index 0 for all tracks"
msgstr ""
#. +> trunk5 stable5
#: rip/k3baudioripjob.cpp:265
#, kde-format
msgid "Starting digital audio extraction (ripping)."
msgstr ""
#. +> trunk5 stable5
#: rip/k3baudioripjob.cpp:296
#, kde-format
msgid "Ripping track %1 (%2 - %3)"
msgstr ""
#. +> trunk5 stable5
#: rip/k3baudioripjob.cpp:301
#, kde-format
msgid "Ripping track %1"
msgstr ""
#. +> trunk5 stable5
#: rip/k3baudioripjob.cpp:307
#, kde-format
msgid "Successfully ripped track %1 to %2."
msgstr ""
#. +> trunk5 stable5
#: rip/k3baudiorippingdialog.cpp:121
#, kde-format
msgid "CD Ripping"
msgstr ""
#. +> trunk5 stable5
#: rip/k3baudiorippingdialog.cpp:180
#, kde-format
msgid "Do not read pregaps"
msgstr ""
#. +> trunk5 stable5
#: rip/k3baudiorippingdialog.cpp:198
#, kde-format
msgid "Starts copying the selected tracks"
msgstr ""
#. +> trunk5 stable5
#: rip/k3baudiorippingdialog.cpp:207
#, kde-format
msgid "Maximal number of read retries"
msgstr ""
#. +> trunk5 stable5
#: rip/k3baudiorippingdialog.cpp:208
#, kde-format
msgid "<p>This specifies the maximum number of retries to read a sector of audio data from the cd. After that K3b will either skip the sector if the <em>Ignore Read Errors</em> option is enabled or stop the process."
msgstr ""
#. +> trunk5 stable5
#: rip/k3baudiorippingdialog.cpp:212
#, kde-format
msgid "Do not read the pregaps at the end of every track"
msgstr ""
#. +> trunk5 stable5
#: rip/k3baudiorippingdialog.cpp:213
#, kde-format
msgid ""
"<p>If this option is checked K3b will not rip the audio data in the pregaps. Most audio tracks contain an empty pregap which does not belong to the track itself.</p>"
"<p>Although the default behavior of nearly all ripping software is to include the pregaps for most CDs, it makes more sense to ignore them. In any case, when creating a K3b audio project, the pregaps will be regenerated.</p>"
"<p>The following strings will be replaced with their respective meaning in every track name.<br>"
"<em>Hint:</em> %A differs from %a only on soundtracks or compilations."
"<p>"
"<table border=\"0\">"
"<tr>"
"<td></td>"
"<td><em>Meaning</em></td>"
"<td><em>Alternatives</em></td>"
"</tr>"
"<tr>"
"<td>%a</td>"
"<td>artist of the track</td>"
"<td>%{a} or %{artist}</td>"
"</tr>"
"<tr>"
"<td>%t</td>"
"<td>title of the track</td>"
"<td>%{t} or %{title}</td>"
"</tr>"
"<tr>"
"<td>%n</td>"
"<td>track number</td>"
"<td>%{n} or %{number}</td>"
"</tr>"
"<tr>"
"<td>%y</td>"
"<td>year of the CD</td>"
"<td>%{y} or %{year}</td>"
"</tr>"
"<tr>"
"<td>%c</td>"
"<td>extended track information</td>"
"<td>%{c} or %{comment}</td>"
"</tr>"
"<tr>"
"<td>%g</td>"
"<td>genre of the CD</td>"
"<td>%{g} or %{genre}</td>"
"</tr>"
"<tr>"
"<td>%A</td>"
"<td>album artist</td>"
"<td>%{A} or %{albumartist}</td>"
"</tr>"
"<tr>"
"<td>%T</td>"
"<td>album title</td>"
"<td>%{T} or %{albumtitle}</td>"
"</tr>"
"<tr>"
"<td>%C</td>"
"<td>extended CD information</td>"
"<td>%{C} or %{albumcomment}</td>"
"</tr>"
"<tr>"
"<td>%d</td>"
"<td>current date</td>"
"<td>%{d} or %{date}</td>"
"</tr>"
"<tr>"
"<td>%e</td>"
"<td>file extension (if left out, it is added automatically)</td>"
"<td>%{e} or %{ext}</td>"
"</tr>"
"</table>"
msgstr ""
#. +> trunk5 stable5
#: rip/k3bcddbpatternwidget.cpp:152
#, kde-format
msgctxt "Please do NOT modify/translate the quotes, they are part of the pattern!"
msgid ""
"<p><b>Conditional inclusion:</b>"
"<p>These patterns make it possible to selectively include texts, depending on the value of CDDB entries. You can choose only to include or exclude texts if one of the entries is empty, or if it has a specific value. Examples:"
"<ul>"
"<li>@T{TEXT} includes TEXT if the album title is specified"
"<li>!T{TEXT} includes TEXT if the album title is not specified"
"<li>@C='Soundtrack'{TEXT} includes TEXT if the CD's extended information is named Soundtrack"
"<li>!C='Soundtrack'{TEXT} includes TEXT if the CD's extended information is anything else but Soundtrack"
"<li>It is also possible to include special strings in texts and conditions, e.g. !a='%A'{%a} only includes the title's artist information if it does not differ from the album artist.</ul>"
"<p>Conditional includes make use of the same characters as the special strings, which means that the X in @X{...} can be one character out of [atnycgATCd]."
msgid "Starts extracting the selected VideoCd tracks"
msgstr ""
#. +> trunk5 stable5
#: rip/k3bvideocdrippingdialog.cpp:125
#, kde-format
msgid "Free space in destination folder: %1"
msgstr ""
#. +> trunk5 stable5
#: rip/k3bvideocdrippingdialog.cpp:127
#, kde-format
msgid "Necessary space for extracted files"
msgstr ""
#. +> trunk5 stable5
#: rip/k3bvideocdrippingdialog.cpp:129
#, kde-format
msgid "Ignore extended PSD"
msgstr ""
#. +> trunk5 stable5
#: rip/k3bvideocdrippingdialog.cpp:130
#, kde-format
msgid "<p>Ignore extended PSD (located in the ISO 9660 filesystem under `/EXT/PSD_X.VCD') and use the <em>standard</em> PSD.</p>"
msgstr ""
#. +> trunk5 stable5
#: rip/k3bvideocdrippingdialog.cpp:132
#, kde-format
msgid "Assume a 2336-byte sector mode"
msgstr ""
#. +> trunk5 stable5
#: rip/k3bvideocdrippingdialog.cpp:133
#, kde-format
msgid ""
"<p>This option only makes sense if you are reading from a BIN CD disk image. This indicates to `vcdxrip' to assume a 2336-byte sector mode for image file.</p>"
"<b>Note: This option is slated to disappear.</b>"
msgstr ""
#. +> trunk5 stable5
#: rip/k3bvideocdrippingdialog.cpp:136
#, kde-format
msgid "Create XML description file."
msgstr ""
#. +> trunk5 stable5
#: rip/k3bvideocdrippingdialog.cpp:137
#, kde-format
msgid ""
"<p>This option creates an XML description file with all video CD information.</p>"
"<p>This file will always contain all of the information.</p>"
"<p>Example: If you only extract sequences, the description file will also hold the information for files and segments.</p>"
"<p>The filename is the same as the video CD name, with a .xml extension. The default is VIDEOCD.xml.</p>"
msgstr ""
#. +> trunk5 stable5
#: rip/k3bvideocdrippingdialog.cpp:169
#, kde-format
msgid "Continue although the folder is not empty?"
"<p>If this option is checked K3b encodes the video titles in two passes. The first pass is used to gather information about the video in order to improve the distribution of bits in the second pass. The resulting video will have a higher quality using a variable bitrate.\n"
"<p>If this option is not checked K3b will create video files with a constant bitrate and a lower quality.\n"
"<p>2-pass encoding results in a doubled encoding time."
"<p>Most Video DVDs are encoded in a letterboxed format. <em>Letterboxed</em> refers to black bars used at the top and bottom (and sometimes at the sides) of the video to force it into one of the aspect ratios supported by the Video DVD standard.\n"
"<p>If this option is checked K3b will automatically detect and remove these black bars from the resulting video.\n"
"<p>Although this method is very reliable there may be problems if the source material is exceptionally short or dark."
"<p>Video DVD audio streams normally are encoded with a sampling rate of 48000 Hz. Audio CDs on the other hand are encoded with a sampling rate of 44100 Hz.\n"
"<p>If this option is checked K3b will change the sampling rate of the audio stream to 44100 Hz."
msgid "Low s&cheduling priority for the video transcoding process"
msgstr ""
#. +> trunk5 stable5
#: rip/videodvd/k3bvideodvdaudiomodel.cpp:156
#: rip/videodvd/k3bvideodvdtitlemodel.cpp:222
#, kde-format
msgid "Title %1 (%2)"
msgstr ""
#. +> trunk5 stable5
#: rip/videodvd/k3bvideodvdaudiomodel.cpp:177
#, kde-format
msgid "%1 %2Ch (%3%4)"
msgstr ""
#. +> trunk5 stable5
#: rip/videodvd/k3bvideodvdaudiomodel.cpp:181
#: rip/videodvd/k3bvideodvdtitlemodel.cpp:53
#: rip/videodvd/k3bvideodvdtitlemodel.cpp:77
#: rip/videodvd/k3bvideodvdtitlemodel.cpp:102
#: rip/videodvd/k3bvideodvdtitlemodel.cpp:127
#, kde-format
msgid "unknown language"
msgstr ""
#. +> trunk5 stable5
#: rip/videodvd/k3bvideodvdaudiomodel.cpp:188
#, kde-format
msgid "%1 (not supported)"
msgstr ""
#. +> trunk5 stable5
#: rip/videodvd/k3bvideodvdaudiomodel.cpp:258
#: rip/videodvd/k3bvideodvdrippingwidget.cpp:85
#: rip/videodvd/k3bvideodvdtitlemodel.cpp:308
#, kde-format
msgid "Title"
msgstr ""
#. +> trunk5 stable5
#: rip/videodvd/k3bvideodvdaudiomodel.cpp:259
#, kde-format
msgid "Video Size"
msgstr ""
#. +> trunk5 stable5
#: rip/videodvd/k3bvideodvdrippingdialog.cpp:279
#, kde-format, no-c-format
msgctxt "Ch is short for Channels"
msgid "%1Ch"
msgid_plural "%1Ch"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: rip/videodvd/k3bvideodvdrippingdialog.cpp:330
#: rip/videodvd/k3bvideodvdrippingdialog.cpp:360
#, kde-format
msgid "Video DVD Ripping"
msgstr ""
#. +> trunk5 stable5
#: rip/videodvd/k3bvideodvdrippingdialog.cpp:361
#, kde-format
msgid "1 title from %2"
msgid_plural "%1 titles from %2"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: rip/videodvd/k3bvideodvdrippingdialog.cpp:499
#, kde-format
msgid "<p>When using the <em>AC3 pass-through</em> audio codec all selected audio streams need to be in AC3 format. Please select another audio codec or choose AC3 audio streams for all ripped titles."
msgstr ""
#. +> trunk5 stable5
#: rip/videodvd/k3bvideodvdrippingdialog.cpp:502
#, kde-format
msgid "AC3 Pass-through"
msgstr ""
#. +> trunk5 stable5
#: rip/videodvd/k3bvideodvdrippingjob.cpp:110
#, kde-format
msgid "Ripping Video DVD Titles"
msgstr ""
#. +> trunk5 stable5
#: rip/videodvd/k3bvideodvdrippingjob.cpp:116
#, kde-format
msgid "Transcoding 1 title to %2/%3"
msgid_plural "Transcoding %1 titles to %2/%3"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: rip/videodvd/k3bvideodvdrippingjob.cpp:145
#, kde-format
msgid "Successfully ripped title %1 to '%2'"
msgstr ""
#. +> trunk5 stable5
#: rip/videodvd/k3bvideodvdrippingjob.cpp:150
#, kde-format
msgid "Failed to rip title %1"
msgstr ""
#. +> trunk5 stable5
#: rip/videodvd/k3bvideodvdrippingjob.cpp:180
#, kde-format
msgid "Determined clipping values for title %1"
msgstr ""
#. +> trunk5 stable5
#: rip/videodvd/k3bvideodvdrippingjob.cpp:181
#, kde-format
msgid "Top: %1, Bottom: %2"
msgstr ""
#. +> trunk5 stable5
#: rip/videodvd/k3bvideodvdrippingjob.cpp:182
#, kde-format
msgid "Left: %1, Right: %2"
msgstr ""
#. +> trunk5 stable5
#: rip/videodvd/k3bvideodvdrippingjob.cpp:189
#, kde-format
msgid "Insane clipping values. No clipping will be done at all."
msgstr ""
#. +> trunk5 stable5
#: rip/videodvd/k3bvideodvdrippingjob.cpp:199
#, kde-format
msgid "Failed to determine clipping values for title %1"
msgstr ""
#. +> trunk5 stable5
#: rip/videodvd/k3bvideodvdrippingview.cpp:87
#, kde-format
msgid "Show files"
msgstr ""
#. +> trunk5 stable5
#: rip/videodvd/k3bvideodvdrippingview.cpp:88
#, kde-format
msgid "Shows plain Video DVD vob files from the DVD (including decryption) for further processing with another application"
msgstr ""
#. +> trunk5 stable5
#: rip/videodvd/k3bvideodvdrippingview.cpp:173
#, kde-format
msgid "Please select the titles to rip."
msgstr ""
#. +> trunk5 stable5
#: rip/videodvd/k3bvideodvdrippingview.cpp:174
#, kde-format
msgid "No Titles Selected"
msgstr ""
#. +> trunk5 stable5
#: rip/videodvd/k3bvideodvdrippingview.cpp:250
#, kde-format
msgid "K3b was unable to unmount device '%1' containing medium '%2'. Video DVD ripping will not work if the device is mounted. Please unmount manually."
msgstr ""
#. +> trunk5 stable5
#: rip/videodvd/k3bvideodvdrippingview.cpp:255
#, kde-format
msgid "Unmounting failed"
msgstr ""
#. +> trunk5 stable5
#: rip/videodvd/k3bvideodvdrippingview.cpp:265
#, kde-format
msgid ""
"<p>Unable to read Video DVD contents: Found encrypted Video DVD."
"<p>Install <i>libdvdcss</i> to get Video DVD decryption support."
msgstr ""
#. +> trunk5 stable5
#: rip/videodvd/k3bvideodvdrippingview.cpp:276
#, kde-format
msgid "%1 (Video DVD)"
msgstr ""
#. +> trunk5 stable5
#: rip/videodvd/k3bvideodvdrippingview.cpp:277
#, kde-format
msgid "%1 title"
msgid_plural "%1 titles"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: rip/videodvd/k3bvideodvdrippingview.cpp:285
#, kde-format
msgid "K3b uses transcode to rip Video DVDs. Please make sure it is installed."
msgstr ""
#. +> trunk5 stable5
#: rip/videodvd/k3bvideodvdrippingview.cpp:299
#, kde-format
msgid ""
"<p>K3b uses transcode to rip Video DVDs. Your installation of transcode lacks support for any of the codecs supported by K3b."
"<p>Please make sure it is installed properly."
msgstr ""
#. +> trunk5 stable5
#: rip/videodvd/k3bvideodvdrippingview.cpp:312
#, kde-format
msgid "Unable to read Video DVD contents."
msgstr ""
#. +> trunk5 stable5
#: rip/videodvd/k3bvideodvdrippingview.cpp:351
#, kde-format
msgid "Open the Video DVD ripping dialog"
msgstr ""
#. +> trunk5 stable5
#: rip/videodvd/k3bvideodvdrippingview.cpp:353
#, kde-format
msgid ""
"<p>Rips single titles from a video DVD into a compressed format such as XviD. Menu structures are completely ignored."
"<p>If you intend to copy the plain Video DVD vob files from the DVD (including decryption) for further processing with another application, please use \"Show files\" button."
"<p>If you intend to make a copy of the entire Video DVD including all menus and extras it is recommended to use the K3b Copy tool."
msgstr ""
#. +> trunk5 stable5
#: rip/videodvd/k3bvideodvdrippingwidget.cpp:67
#, kde-format
msgid "Keep original dimensions"
msgstr ""
#. +> trunk5 stable5
#: rip/videodvd/k3bvideodvdrippingwidget.cpp:68
#, kde-format
msgid "640x? (automatic height)"
msgstr ""
#. +> trunk5 stable5
#: rip/videodvd/k3bvideodvdrippingwidget.cpp:69
#, kde-format
msgid "320x? (automatic height)"
msgstr ""
#. +> trunk5 stable5
#: rip/videodvd/k3bvideodvdrippingwidget.cpp:187
#: rip/videodvd/k3bvideodvdrippingwidget.cpp:188
#, kde-format
msgid "auto"
msgstr ""
#. +> trunk5 stable5
#: rip/videodvd/k3bvideodvdrippingwidget.cpp:287
#, kde-format
msgid ""
"<p><b>Pattern special strings:</b>"
"<p>The following strings will be replaced with their respective meaning in every track name.<br>"
"<p>"
"<table border=\"0\">"
"<tr>"
"<td></td>"
"<td><em>Meaning</em></td>"
"<td><em>Alternatives</em></td>"
"</tr>"
"<tr>"
"<td>%t</td>"
"<td>title number</td>"
"<td>%{t} or %{title_number}</td>"
"</tr>"
"<tr>"
"<td>%i</td>"
"<td>volume id (mostly the name of the Video DVD)</td>"
"<td>%{i} or %{volume_id}</td>"
"</tr>"
"<tr>"
"<td>%b</td>"
"<td>beautified volume id</td>"
"<td>%{b} or %{beautified_volume_id}</td>"
"</tr>"
"<tr>"
"<td>%l</td>"
"<td>two chars language code</td>"
"<td>%{l} or %{lang_code}</td>"
"</tr>"
"<tr>"
"<td>%n</td>"
"<td>language name</td>"
"<td>%{n} or %{lang_name}</td>"
"</tr>"
"<tr>"
"<td>%a</td>"
"<td>audio format (on the Video DVD)</td>"
"<td>%{a} or %{audio_format}</td>"
"</tr>"
"<tr>"
"<td>%c</td>"
"<td>number of audio channels (on the Video DVD)</td>"
"<td>%{c} or %{channels}</td>"
"</tr>"
"<tr>"
"<td>%v</td>"
"<td>size of the original video</td>"
"<td>%{v} or %{orig_video_size}</td>"
"</tr>"
"<tr>"
"<td>%s</td>"
"<td>size of the resulting video (<em>Caution: auto-clipping values are not taken into account.</em>)</td>"
"<td>%{s} or %{video_size}</td>"
"</tr>"
"<tr>"
"<td>%r</td>"
"<td>aspect ratio of the original video</td>"
"<td>%{r} or %{aspect_ratio}</td>"
"</tr>"
"<tr>"
"<td>%d</td>"
"<td>current date</td>"
"<td>%{d} or %{date}</td>"
"</tr>"
"</table>"
"<p><em>Hint: K3b also accepts slight variations of the long special strings. One can, for example, leave out the underscores.</em>"
msgstr ""
#. +> trunk5 stable5
#: rip/videodvd/k3bvideodvdrippingwidget.cpp:340
#, kde-format
msgid "Video Picture Size"
msgstr ""
#. +> trunk5 stable5
#: rip/videodvd/k3bvideodvdrippingwidget.cpp:342
#, kde-format
msgid ""
"<p>Please choose the width and height of the resulting video. If one value is set to <em>Auto</em> K3b will choose this value depending on the aspect ratio of the video picture.<br>"
"Be aware that setting both the width and the height to fixed values will result in no aspect ratio correction being performed."
msgid "At least one of the items in the clipboard could not be pasted because an item of the same name already exists. Any other items have been pasted."
"The views are stored in folders in the document. The same tree structure used in the document to store the views can be created in the selected base directory with this option.\n"
"Only the folders made by the user are created in the base directory (Logical view, use case view and so on are not created)."
"<p>The auto layout feature depends on layout generators provided by the GraphViz package, which is normally installed aside Umbrello by a package manager.</p>"
"\n"
"<p>Umbrello has build in support for detecting the install location of these layout generators. For cases where this dependency is not available or do not fit, a different installation path could be provided.</p>"
msgid "Turn on footer and page numbers when printing"
msgstr ""
#. +> trunk5 stable5
#: dialogs/pages/generaloptionpage.cpp:84
#, kde-format
msgid "Autosave"
msgstr ""
#. +> trunk5 stable5
#: dialogs/pages/generaloptionpage.cpp:91
#, kde-format
msgid "E&nable autosave"
msgstr ""
#. +> trunk5 stable5
#: dialogs/pages/generaloptionpage.cpp:95
#, kde-format
msgid "Select auto-save time interval (mins):"
msgstr ""
#. +> trunk5 stable5
#: dialogs/pages/generaloptionpage.cpp:111
#, kde-format
msgid "Set autosave suffix:"
msgstr ""
#. +> trunk5 stable5
#: dialogs/pages/generaloptionpage.cpp:113
#, kde-format
msgid ""
"<qt>"
"<p>The autosave file will be saved to ~/autosave.xmi if the autosaving occurs before you have manually saved the file.</p>"
"<p>If you have already saved it, the autosave file will be saved in the same folder as the file and will be named like the file's name, followed by the suffix specified.</p>"
"<p>If the suffix is equal to the suffix of the file you have saved, the autosave will overwrite your file automatically.</p>"
#. m_pProtectedRB = new QRadioButton(i18n("&Unique"), m_pScopeGB);
#. scopeLayout->addWidget(m_pProtectedRB);
#.
#. +> trunk5 stable5
#: dialogs/umlentityattributedialog.cpp:132
#, kde-format
msgid "&Indexed"
msgstr ""
#. +> trunk5 stable5
#: dialogs/umlentityattributedialog.cpp:170
#, kde-format
msgid "You have entered an invalid entity attribute name."
msgstr ""
#. +> trunk5 stable5
#: dialogs/umlentityattributedialog.cpp:171
#, kde-format
msgid "Entity Attribute Name Invalid"
msgstr ""
#. +> trunk5 stable5
#: dialogs/umlentityattributedialog.cpp:178
#, kde-format
msgid "The entity attribute name you have chosen is already being used in this operation."
msgstr ""
#. +> trunk5 stable5
#: dialogs/umlentityattributedialog.cpp:179
#, kde-format
msgid "Entity Attribute Name Not Unique"
msgstr ""
#. +> trunk5 stable5
#: dialogs/umlenumliteraldialog.cpp:34
#, kde-format
msgid "EnumLiteral Properties"
msgstr ""
#. +> trunk5 stable5
#: dialogs/umlenumliteraldialog.cpp:60
#, kde-format
msgctxt "literal name"
msgid "&Name:"
msgstr ""
#. +> trunk5 stable5
#: dialogs/umlenumliteraldialog.cpp:64
#, kde-format
msgid "&Value:"
msgstr ""
#. +> trunk5 stable5
#: dialogs/umlfiledialog.cpp:139
#, kde-format
msgid "All Supported Files"
msgstr ""
#. +> trunk5 stable5
#: dialogs/umlforeignkeyconstraintdialog.cpp:62
#, kde-format
msgid "Foreign Key Setup"
msgstr ""
#. +> trunk5 stable5
#: dialogs/umlforeignkeyconstraintdialog.cpp:205
#, kde-format
msgctxt "general page title"
msgid "General"
msgstr ""
#. +> trunk5 stable5
#: dialogs/umlforeignkeyconstraintdialog.cpp:208
#, kde-format
msgctxt "general group title"
msgid "General"
msgstr ""
#. +> trunk5 stable5
#: dialogs/umlforeignkeyconstraintdialog.cpp:216
#, kde-format
msgctxt "label for entering name"
msgid "Name"
msgstr ""
#. +> trunk5 stable5
#: dialogs/umlforeignkeyconstraintdialog.cpp:219
#, kde-format
msgid "Referenced Entity"
msgstr ""
#. +> trunk5 stable5
#: dialogs/umlforeignkeyconstraintdialog.cpp:225
#, kde-format
msgid "Actions"
msgstr ""
#. +> trunk5 stable5
#: dialogs/umlforeignkeyconstraintdialog.cpp:232
#, kde-format
msgid "On Update"
msgstr ""
#. +> trunk5 stable5
#: dialogs/umlforeignkeyconstraintdialog.cpp:238
#, kde-format
msgid "On Delete"
msgstr ""
#. +> trunk5 stable5
#: dialogs/umlforeignkeyconstraintdialog.cpp:270
#, kde-format
msgid "No Action"
msgstr ""
#. +> trunk5 stable5
#: dialogs/umlforeignkeyconstraintdialog.cpp:270
#, kde-format
msgid "Restrict"
msgstr ""
#. +> trunk5 stable5
#: dialogs/umlforeignkeyconstraintdialog.cpp:270
#, kde-format
msgid "Cascade"
msgstr ""
#. +> trunk5 stable5
#: dialogs/umlforeignkeyconstraintdialog.cpp:270
#, kde-format
msgid "Set Null"
msgstr ""
#. +> trunk5 stable5
#: dialogs/umlforeignkeyconstraintdialog.cpp:271
#, kde-format
msgid "Set Default"
msgstr ""
#. +> trunk5 stable5
#: dialogs/umlforeignkeyconstraintdialog.cpp:292
#, kde-format
msgid "Columns"
msgstr ""
#. +> trunk5 stable5
#: dialogs/umlforeignkeyconstraintdialog.cpp:299
#, kde-format
msgctxt "column header local"
msgid "Local"
msgstr ""
#. +> trunk5 stable5
#: dialogs/umlforeignkeyconstraintdialog.cpp:299
#, kde-format
msgctxt "column header referenced"
msgid "Referenced"
msgstr ""
#. +> trunk5 stable5
#: dialogs/umlforeignkeyconstraintdialog.cpp:306
#, kde-format
msgid "Local Column"
msgstr ""
#. +> trunk5 stable5
#: dialogs/umlforeignkeyconstraintdialog.cpp:312
#, kde-format
msgid "Referenced Column"
msgstr ""
#. +> trunk5 stable5
#: dialogs/umlforeignkeyconstraintdialog.cpp:320
#: dialogs/umlforeignkeyconstraintdialog.cpp:326
#: dialogs/umluniqueconstraintdialog.cpp:115
#: dialogs/umluniqueconstraintdialog.cpp:121
#, kde-format
msgid "&Add"
msgstr ""
#. +> trunk5 stable5
#: dialogs/umlforeignkeyconstraintdialog.cpp:402
#, kde-format
msgid "You are attempting to change the Referenced Entity of this ForeignKey Constraint. Any unapplied changes to the mappings between local and referenced entities will be lost. Are you sure you want to continue ?"
msgstr ""
#. +> trunk5 stable5
#: dialogs/umlinstanceattributedialog.cpp:26
#, kde-format
msgid "Object Attribute Properties"
msgstr ""
#. +> trunk5 stable5
#: dialogs/umlinstanceattributedialog.cpp:43
#, kde-format
msgid "Class Name Invalid"
msgstr ""
#. +> trunk5 stable5
#: dialogs/umlinstanceattributedialog.cpp:47
#, kde-format
msgid "You have entered an invalid attribute value."
msgid "KMail is the email client by KDE. It is designed to be fully compatible with Internet mailing standards including IMAP, POP3 and SMTP."
msgstr ""
#. +> trunk5 stable5
#: about/introduction_kmail.html:10 html.cpp:6
msgid "KMail has many powerful features that are described in the <a href='help:/kmail2/index.html'>documentation</a>."
msgstr ""
#. +> trunk5 stable5
#: about/introduction_kmail.html:16 html.cpp:8
msgid "Important changes since last version:"
msgstr ""
#. +> trunk5 stable5
#: about/introduction_kmail.html:25 html.cpp:10
msgid "Some of the new features in this release of KMail include:"
msgstr ""
#. +> trunk5 stable5
#: about/introduction_kmail.html:34 html.cpp:12
msgid "Please take a moment to fill in the KMail configuration panel at Settings->Configure KMail. You need to create at least a default identity and incoming as well as outgoing mail account."
msgid "KMail was unable to fully detect a mailing list in this folder. Please fill in the addresses by hand."
msgstr ""
#. +> trunk5 stable5
#: collectionpage/collectionquotapage.cpp:45
#, kde-format
msgid "Quota"
msgstr ""
#. +> trunk5 stable5
#: collectionpage/collectionquotawidget.cpp:47
#, kde-format
msgid "Usage:"
msgstr ""
#. +> trunk5 stable5
#: collectionpage/collectionquotawidget.cpp:54
#, kde-format
msgid "Status:"
msgstr ""
#. +> trunk5 stable5
#: collectionpage/collectionquotawidget.cpp:58
#, kde-format, no-c-format
msgid "%p% full"
msgstr ""
#. +> trunk5 stable5
#: collectionpage/collectionquotawidget.cpp:67
#, kde-format
msgid "%1 of %2 used"
msgstr ""
#. +> trunk5 stable5
#: collectionpage/collectionshortcutpage.cpp:39
#, kde-format
msgctxt "@title:tab Shortcut settings for a folder."
msgid "Shortcut"
msgstr ""
#. +> trunk5 stable5
#: collectionpage/collectionshortcutpage.cpp:53
#, kde-format
msgid "<qt>To choose a key or a combination of keys which select the current folder, click the button below and then press the key(s) you wish to associate with this folder.</qt>"
msgstr ""
#. +> trunk5 stable5
#: collectionpage/collectiontemplatespage.cpp:39
#: identity/identitydialog.cpp:685
#, kde-format
msgid "Templates"
msgstr ""
#. +> trunk5 stable5
#: collectionpage/collectiontemplatespage.cpp:60
#, kde-format
msgid "&Use custom message templates in this folder"
msgstr ""
#. +> trunk5 stable5
#: collectionpage/collectiontemplatespage.cpp:76
#: identity/identitydialog.cpp:678
#, kde-format
msgid "&Copy Global Templates"
msgstr ""
#. +> trunk5 stable5
#: collectionpage/collectionviewpage.cpp:52
#, kde-format
msgctxt "@title:tab View settings for a folder."
msgid "View"
msgstr ""
#. +> trunk5 stable5
#: collectionpage/collectionviewpage.cpp:69
#, kde-format
msgid "Use custom &icons"
msgstr ""
#. +> trunk5 stable5
#: collectionpage/collectionviewpage.cpp:72
#, kde-format
msgctxt "Icon used for folders with no unread messages."
msgid "&Normal:"
msgstr ""
#. +> trunk5 stable5
#: collectionpage/collectionviewpage.cpp:85
#, kde-format
msgctxt "Icon used for folders which do have unread messages."
msgid "&Unread:"
msgstr ""
#. +> trunk5 stable5
#: collectionpage/collectionviewpage.cpp:117
#, kde-format
msgid "Show Sender/Receiver Column in List of Messages"
msgid "&Keep original charset when replying or forwarding (if possible)"
msgstr ""
#. +> trunk5 stable5
#: configuredialog/configurecomposerpage.cpp:812
#, kde-format
msgid "This charset is not supported."
msgstr ""
#. +> trunk5 stable5
#: configuredialog/configurecomposerpage.cpp:877
#, kde-format
msgid "&Use custom message-id suffix"
msgstr ""
#. +> trunk5 stable5
#: configuredialog/configurecomposerpage.cpp:890
#, kde-format
msgid "Custom message-&id suffix:"
msgstr ""
#. +> trunk5 stable5
#: configuredialog/configurecomposerpage.cpp:902
#, kde-format
msgid "Define custom mime header fields:"
msgstr ""
#. +> trunk5 stable5
#: configuredialog/configurecomposerpage.cpp:910
#, kde-format
msgctxt "@title:column Name of the mime header."
msgid "Name"
msgstr ""
#. +> trunk5 stable5
#: configuredialog/configurecomposerpage.cpp:911
#, kde-format
msgctxt "@title:column Value of the mimeheader."
msgid "Value"
msgstr ""
#. +> trunk5 stable5
#: configuredialog/configurecomposerpage.cpp:919
#, kde-format
msgctxt "@action:button Add new mime header field."
msgid "Ne&w"
msgstr ""
#. +> trunk5 stable5
#: configuredialog/configurecomposerpage.cpp:932
#, kde-format
msgctxt "@label:textbox Name of the mime header."
msgid "&Name:"
msgstr ""
#. +> trunk5 stable5
#: configuredialog/configurecomposerpage.cpp:942
#, kde-format
msgid "&Value:"
msgstr ""
#. +> trunk5 stable5
#: configuredialog/configurecomposerpage.cpp:1084
#, kde-format
msgid "'Content-Type' is not an authorized string. This header will be not saved."
msgstr ""
#. +> trunk5 stable5
#: configuredialog/configurecomposerpage.cpp:1084
#, kde-format
msgid "Invalid header"
msgstr ""
#. +> trunk5 stable5
#: configuredialog/configurecomposerpage.cpp:1126
#, kde-format
msgid "Outlook-compatible attachment naming"
msgstr ""
#. +> trunk5 stable5
#: configuredialog/configurecomposerpage.cpp:1129
#, kde-format
msgid "Turn this option on to make Outlook(tm) understand attachment names containing non-English characters"
msgstr ""
#. +> trunk5 stable5
#: configuredialog/configurecomposerpage.cpp:1138
#, kde-format
msgid "E&nable detection of missing attachments"
msgstr ""
#. +> trunk5 stable5
#: configuredialog/configurecomposerpage.cpp:1144
#, kde-format
msgid "Recognize any of the following key words as intention to attach a file:"
msgstr ""
#. +> trunk5 stable5
#: configuredialog/configurecomposerpage.cpp:1157
#, kde-format
msgid "Enter new key word:"
msgstr ""
#. +> trunk5 stable5
#: configuredialog/configurecomposerpage.cpp:1165
#, kde-format
msgid "Maximum Attachment Size:"
msgstr ""
#. +> trunk5 stable5
#: configuredialog/configurecomposerpage.cpp:1172
#, kde-format
msgctxt "spinbox suffix: unit for kilobyte"
msgid " kB"
msgstr ""
#. +> trunk5 stable5
#: configuredialog/configurecomposerpage.cpp:1174
#, kde-format
msgid "No limit"
msgstr ""
#. +> trunk5 stable5
#: configuredialog/configurecomposerpage.cpp:1202
#, kde-format
msgid ""
"You have chosen to encode attachment names containing non-English characters in a way that is understood by Outlook(tm) and other mail clients that do not support standard-compliant encoded attachment names.\n"
"Note that KMail may create non-standard compliant messages, and consequently it is possible that your messages will not be understood by standard-compliant mail clients; so, unless you have no other choice, you should not enable this option."
"<p>You have requested that messages be encrypted to yourself, but the currently selected identity does not define an (OpenPGP or S/MIME) encryption key to use for this.</p>"
"<p>Please select the key(s) to use in the identity configuration.</p>"
"</qt>"
msgstr ""
#. +> trunk5 stable5
#: editor/kmcomposerwin.cpp:2305
#, kde-format
msgid "Undefined Encryption Key"
msgstr ""
#. +> trunk5 stable5
#: editor/kmcomposerwin.cpp:2368
#, kde-format
msgid ""
"<qt>"
"<p>In order to be able to sign this message you first have to define the (OpenPGP or S/MIME) signing key to use.</p>"
"<p>Please select the key to use in the identity configuration.</p>"
"</qt>"
msgstr ""
#. +> trunk5 stable5
#: editor/kmcomposerwin.cpp:2375
#, kde-format
msgid "Undefined Signing Key"
msgstr ""
#. +> trunk5 stable5
#: editor/kmcomposerwin.cpp:2511
#, kde-format
msgid "You must enter your email address in the From: field. You should also set your email address for all identities, so that you do not have to enter it for each message."
msgstr ""
#. +> trunk5 stable5
#: editor/kmcomposerwin.cpp:2520
#, kde-format
msgid "You must specify at least one receiver, either in the To: field or as CC or as BCC."
msgstr ""
#. +> trunk5 stable5
#: editor/kmcomposerwin.cpp:2526
#, kde-format
msgid "To: field is empty. Send message anyway?"
msgstr ""
#. +> trunk5 stable5
#: editor/kmcomposerwin.cpp:2528
#, kde-format
msgid "No To: specified"
msgstr ""
#. +> trunk5 stable5
#: editor/kmcomposerwin.cpp:2541
#, kde-format
msgid "You did not specify a subject. Send message anyway?"
msgstr ""
#. +> trunk5 stable5
#: editor/kmcomposerwin.cpp:2543
#, kde-format
msgid "No Subject Specified"
msgstr ""
#. +> trunk5 stable5
#: editor/kmcomposerwin.cpp:2544
#, kde-format
msgid "S&end as Is"
msgstr ""
#. +> trunk5 stable5
#: editor/kmcomposerwin.cpp:2545
#, kde-format
msgid "&Specify the Subject"
msgstr ""
#. +> trunk5 stable5
#: editor/kmcomposerwin.cpp:2595
#, kde-format
msgid "You must specify at least one receiver in order to be able to encrypt a draft."
msgstr ""
#. +> trunk5 stable5
#: editor/kmcomposerwin.cpp:2782
#, kde-format
msgid "About to send email..."
msgstr ""
#. +> trunk5 stable5
#: editor/kmcomposerwin.cpp:2783
#, kde-format
msgid "Send Confirmation"
msgstr ""
#. +> trunk5 stable5
#: editor/kmcomposerwin.cpp:2784
#, kde-format
msgid "&Send Now"
msgstr ""
#. +> trunk5 stable5
#: editor/kmcomposerwin.cpp:2853
#, kde-format
msgid "You are trying to send the mail to more than %1 recipients. Send message anyway?"
msgstr ""
#. +> trunk5 stable5
#: editor/kmcomposerwin.cpp:2854
#, kde-format
msgid "Too many recipients"
msgstr ""
#. +> trunk5 stable5
#: editor/kmcomposerwin.cpp:2855
#, kde-format
msgid "&Send as Is"
msgstr ""
#. +> trunk5 stable5
#: editor/kmcomposerwin.cpp:2856
#, kde-format
msgid "&Edit Recipients"
msgstr ""
#. +> trunk5 stable5
#: editor/kmcomposerwin.cpp:2890
#, kde-format
msgid "Turning HTML mode off will cause the text to lose the formatting. Are you sure?"
msgstr ""
#. +> trunk5 stable5
#: editor/kmcomposerwin.cpp:2892
#, kde-format
msgid "Lose the formatting?"
msgstr ""
#. +> trunk5 stable5
#: editor/kmcomposerwin.cpp:2892
#, kde-format
msgid "Lose Formatting"
msgstr ""
#. +> trunk5 stable5
#: editor/kmcomposerwin.cpp:2892
#, kde-format
msgid "Add Markup Plain Text"
msgstr ""
#. +> trunk5 stable5
#: editor/kmcomposerwin.cpp:3506
#, kde-format
msgid "High security encryption will be used for this recipient (the encryption key is fully trusted). Click the icon for details."
msgstr ""
#. +> trunk5 stable5
#: editor/kmcomposerwin.cpp:3511
#, kde-format
msgid "Medium security encryption will be used for this recipient (the encryption key is marginally trusted). Click the icon for details."
msgstr ""
#. +> trunk5 stable5
#: editor/kmcomposerwin.cpp:3516
#, kde-format
msgid "Low security encryption will be used for this recipient (the encryption key is untrusted). Click the icon for details."
msgstr ""
#. +> trunk5 stable5
#: editor/kmcomposerwin.cpp:3522
#, kde-format
msgid "The email to this recipient will be encrypted, but the security of the encryption is unknown (the encryption key could not be verified). Click the icon for details."
msgid "The message you have composed seems to refer to an attached file but you have not attached anything. Do you want to attach a file to your message?"
"<p>This field should contain your name as you would like it to appear in the email header that is sent out;</p>"
"<p>if you leave this blank your real name will not appear, only the email address.</p>"
"</qt>"
msgstr ""
#. +> trunk5 stable5
#: identity/identitydialog.cpp:324
#, kde-format
msgid "Organi&zation:"
msgstr ""
#. +> trunk5 stable5
#: identity/identitydialog.cpp:327
#, kde-format
msgid ""
"<qt>"
"<h3>Organization</h3>"
"<p>This field should have the name of your organization if you would like it to be shown in the email header that is sent out.</p>"
"<p>It is safe (and normal) to leave this blank.</p>"
"</qt>"
msgstr ""
#. +> trunk5 stable5
#: identity/identitydialog.cpp:340
#, kde-format
msgid "&Email address:"
msgstr ""
#. +> trunk5 stable5
#: identity/identitydialog.cpp:343
#, kde-format
msgid ""
"<qt>"
"<h3>Email address</h3>"
"<p>This field should have your full email address.</p>"
"<p>This address is the primary one, used for all outgoing mail. If you have more than one address, either create a new identity, or add additional alias addresses in the field below.</p>"
"<p>If you leave this blank, or get it wrong, people will have trouble replying to you.</p>"
"</qt>"
msgstr ""
#. +> trunk5 stable5
#: identity/identitydialog.cpp:364
#, kde-format
msgid "Email a&liases:"
msgstr ""
#. +> trunk5 stable5
#: identity/identitydialog.cpp:367
#, kde-format
msgid ""
"<qt>"
"<h3>Email aliases</h3>"
"<p>This field contains alias addresses that should also be considered as belonging to this identity (as opposed to representing a different identity).</p>"
"<p>Example:</p>"
"<table>"
"<tr>"
"<th>Primary address:</th>"
"<td>first.last@example.org</td>"
"</tr>"
"<tr>"
"<th>Aliases:</th>"
"<td>first@example.org<br>"
"last@example.org</td>"
"</tr>"
"</table>"
"<p>Type one alias address per line.</p>"
"</qt>"
msgstr ""
#. +> trunk5 stable5
#: identity/identitydialog.cpp:385
#, kde-format
msgid "Cryptography"
msgstr ""
#. +> trunk5 stable5
#: identity/identitydialog.cpp:392
#, kde-format
msgid ""
"<qt>"
"<p>The OpenPGP key you choose here will be used to digitally sign messages. You can also use GnuPG keys.</p>"
"<p>You can leave this blank, but KMail will not be able to digitally sign emails using OpenPGP; normal mail functions will not be affected.</p>"
"<p>You can find out more about keys at <a>http://www.gnupg.org</a></p>"
"</qt>"
msgstr ""
#. +> trunk5 stable5
#: identity/identitydialog.cpp:398
#, kde-format
msgid "OpenPGP signing key:"
msgstr ""
#. +> trunk5 stable5
#: identity/identitydialog.cpp:409
#, kde-format
msgid ""
"<qt>"
"<p>The OpenPGP key you choose here will be used to encrypt messages to yourself and for the \"Attach My Public Key\" feature in the composer. You can also use GnuPG keys.</p>"
"<p>You can leave this blank, but KMail will not be able to encrypt copies of outgoing messages to you using OpenPGP; normal mail functions will not be affected.</p>"
"<p>You can find out more about keys at <a>http://www.gnupg.org</a></p>"
"</qt>"
msgstr ""
#. +> trunk5 stable5
#: identity/identitydialog.cpp:416
#, kde-format
msgid "OpenPGP encryption key:"
msgstr ""
#. +> trunk5 stable5
#: identity/identitydialog.cpp:427
#, kde-format
msgid ""
"<qt>"
"<p>The S/MIME (X.509) certificate you choose here will be used to digitally sign messages.</p>"
"<p>You can leave this blank, but KMail will not be able to digitally sign emails using S/MIME; normal mail functions will not be affected.</p>"
"</qt>"
msgstr ""
#. +> trunk5 stable5
#: identity/identitydialog.cpp:432
#, kde-format
msgid "S/MIME signing certificate:"
msgstr ""
#. +> trunk5 stable5
#: identity/identitydialog.cpp:447
#, kde-format
msgid ""
"<qt>"
"<p>The S/MIME certificate you choose here will be used to encrypt messages to yourself and for the \"Attach My Certificate\" feature in the composer.</p>"
"<p>You can leave this blank, but KMail will not be able to encrypt copies of outgoing messages to you using S/MIME; normal mail functions will not be affected.</p>"
"</qt>"
msgstr ""
#. +> trunk5 stable5
#: identity/identitydialog.cpp:453
#, kde-format
msgid "S/MIME encryption certificate:"
msgstr ""
#. +> trunk5 stable5
#: identity/identitydialog.cpp:475
#, kde-format
msgctxt "preferred format of encrypted messages"
msgid "Preferred format:"
msgstr ""
#. +> trunk5 stable5
#: identity/identitydialog.cpp:482
#, kde-format
msgid "Automatically sign messages"
msgstr ""
#. +> trunk5 stable5
#: identity/identitydialog.cpp:486
#, kde-format
msgid "Automatically encrypt messages when possible"
msgstr ""
#. +> trunk5 stable5
#: identity/identitydialog.cpp:500
#, kde-format
msgctxt "@title:tab Advanced identity settings."
msgid "Advanced"
msgstr ""
#. +> trunk5 stable5
#: identity/identitydialog.cpp:512
#, kde-format
msgid "&Reply-To address:"
msgstr ""
#. +> trunk5 stable5
#: identity/identitydialog.cpp:515
#, kde-format
msgid ""
"<qt>"
"<h3>Reply-To addresses</h3>"
"<p>This sets the <tt>Reply-to:</tt> header to contain a different email address to the normal <tt>From:</tt> address.</p>"
"<p>This can be useful when you have a group of people working together in similar roles. For example, you might want any emails sent to have your email in the <tt>From:</tt> field, but any responses to go to a group address.</p>"
"<p>If in doubt, leave this field blank.</p>"
"</qt>"
msgstr ""
#. +> trunk5 stable5
#: identity/identitydialog.cpp:534
#, kde-format
msgid "&CC addresses:"
msgstr ""
#. +> trunk5 stable5
#: identity/identitydialog.cpp:537
#, kde-format
msgid ""
"<qt>"
"<h3>CC (Carbon Copy) addresses</h3>"
"<p>The addresses that you enter here will be added to each outgoing mail that is sent with this identity.</p>"
"<p>This is commonly used to send a copy of each sent message to another account of yours.</p>"
"<p>To specify more than one address, use commas to separate the list of CC recipients.</p>"
"<p>If in doubt, leave this field blank.</p>"
"</qt>"
msgstr ""
#. +> trunk5 stable5
#: identity/identitydialog.cpp:554
#, kde-format
msgid "&BCC addresses:"
msgstr ""
#. +> trunk5 stable5
#: identity/identitydialog.cpp:557
#, kde-format
msgid ""
"<qt>"
"<h3>BCC (Blind Carbon Copy) addresses</h3>"
"<p>The addresses that you enter here will be added to each outgoing mail that is sent with this identity. They will not be visible to other recipients.</p>"
"<p>This is commonly used to send a copy of each sent message to another account of yours.</p>"
"<p>To specify more than one address, use commas to separate the list of BCC recipients.</p>"
"One of the configured OpenPGP signing keys does not contain any user ID with the configured email address for this identity (%1).\n"
"This might result in warning messages on the receiving side when trying to verify signatures made with this configuration."
msgstr ""
#. +> trunk5 stable5
#: identity/identitydialog.cpp:827
#, kde-format
msgid "One of the configured OpenPGP encryption keys does not contain any user ID with the configured email address for this identity (%1)."
msgstr ""
#. +> trunk5 stable5
#: identity/identitydialog.cpp:832
#, kde-format
msgid ""
"One of the configured S/MIME signing certificates does not contain the configured email address for this identity (%1).\n"
"This might result in warning messages on the receiving side when trying to verify signatures made with this configuration."
msgstr ""
#. +> trunk5 stable5
#: identity/identitydialog.cpp:839
#, kde-format
msgid "One of the configured S/MIME encryption certificates does not contain the configured email address for this identity (%1)."
msgstr ""
#. +> trunk5 stable5
#: identity/identitydialog.cpp:847
#, kde-format
msgid "Email Address Not Found in Key/Certificates"
msgstr ""
#. +> trunk5 stable5
#: identity/identitydialog.cpp:860
#, kde-format
msgid "The signature file is not valid"
msgstr ""
#. +> trunk5 stable5
#: identity/identitydialog.cpp:876
#, kde-format
msgid "Edit Identity \"%1\""
msgstr ""
#. +> trunk5 stable5
#: identity/identitydialog.cpp:934
#, kde-format
msgid "Some custom folder for identity does not exist (anymore); therefore, default folders will be used."
msgstr ""
#. +> trunk5 stable5
#: identity/identitydialog.cpp:1150
#, kde-format
msgid "Edit..."
msgstr ""
#. +> trunk5 stable5
#: identity/identityeditvcarddialog.cpp:48
#, kde-format
msgid "Edit own vCard"
msgstr ""
#. +> trunk5 stable5
#: identity/identityeditvcarddialog.cpp:51
#, kde-format
msgid "Delete current vCard"
msgstr ""
#. +> trunk5 stable5
#: identity/identityeditvcarddialog.cpp:71
#, kde-format
msgid "Are you sure you want to delete this vCard?"
msgstr ""
#. +> trunk5 stable5
#: identity/identityeditvcarddialog.cpp:71
#: identity/identityeditvcarddialog.cpp:88
#, kde-format
msgid "Delete vCard"
msgstr ""
#. +> trunk5 stable5
#: identity/identityeditvcarddialog.cpp:88
#, kde-format
msgid "We cannot delete vCard file."
msgstr ""
#. +> trunk5 stable5
#: identity/identitylistview.cpp:100
#, kde-format
msgctxt "%1: identity name. Used in the config dialog, section Identity, to indicate the default identity"
msgid "%1 (Default)"
msgstr ""
#. +> trunk5 stable5
#: identity/identitylistview.cpp:129
#, kde-format
msgid "Identity Name"
msgstr ""
#. +> trunk5 stable5
#: identity/identitylistview.cpp:129
#, kde-format
msgid "Email Address"
msgstr ""
#. +> trunk5 stable5
#: identity/identitypage.cpp:226
#, kde-format
msgid "<qt>Do you really want to remove the identity named <b>%1</b>?</qt>"
msgstr ""
#. +> trunk5 stable5
#: identity/identitypage.cpp:228
#, kde-format
msgid "Remove Identity"
msgstr ""
#. +> trunk5 stable5
#: identity/identitypage.cpp:229
#, kde-format
msgid "&Remove"
msgstr ""
#. +> trunk5 stable5
#: identity/identitypage.cpp:281
#, kde-format
msgid "Rename"
msgstr ""
#. +> trunk5 stable5
#: identity/identitypage.cpp:287
#, kde-format
msgid "Set as Default"
msgstr ""
#. +> trunk5 stable5
#: identity/newidentitydialog.cpp:50
#, kde-format
msgid "New Identity"
msgstr ""
#. +> trunk5 stable5
#: identity/newidentitydialog.cpp:72
#, kde-format
msgid "&New identity:"
msgstr ""
#. +> trunk5 stable5
#: identity/newidentitydialog.cpp:87
#, kde-format
msgid "&Use System Settings values"
msgstr ""
#. +> trunk5 stable5
#: identity/newidentitydialog.cpp:92
#, kde-format
msgid "&Duplicate existing identity"
msgstr ""
#. +> trunk5 stable5
#: identity/xfaceconfigurator.cpp:72
#, kde-format
msgid "&Send picture with every message"
msgstr ""
#. +> trunk5 stable5
#: identity/xfaceconfigurator.cpp:74
#, kde-format
msgid "Check this box if you want KMail to add a so-called X-Face header to messages written with this identity. An X-Face is a small (48x48 pixels) black and white image that some mail clients are able to display."
msgstr ""
#. +> trunk5 stable5
#: identity/xfaceconfigurator.cpp:81
#, kde-format
msgid "This is a preview of the picture selected/entered below."
msgstr ""
#. +> trunk5 stable5
#: identity/xfaceconfigurator.cpp:95
#, kde-format
msgid "Click on the widgets below to obtain help on the input methods."
msgstr ""
#. +> trunk5 stable5
#: identity/xfaceconfigurator.cpp:99
#, kde-format
msgctxt "continuation of \"obtain picture from\""
msgid "External Source"
msgstr ""
#. +> trunk5 stable5
#: identity/xfaceconfigurator.cpp:101
#, kde-format
msgctxt "continuation of \"obtain picture from\""
msgid "Input Field Below"
msgstr ""
#. +> trunk5 stable5
#: identity/xfaceconfigurator.cpp:102
#, kde-format
msgid "Obtain pic&ture from:"
msgstr ""
#. +> trunk5 stable5
#: identity/xfaceconfigurator.cpp:129
#, kde-format
msgid "Select File..."
msgstr ""
#. +> trunk5 stable5
#: identity/xfaceconfigurator.cpp:131
#, kde-format
msgid "Use this to select an image file to create the picture from. The image should be of high contrast and nearly quadratic shape. A light background helps improve the result."
msgstr ""
#. +> trunk5 stable5
#: identity/xfaceconfigurator.cpp:137
#, kde-format
msgid "Set From Address Book"
msgstr ""
#. +> trunk5 stable5
#: identity/xfaceconfigurator.cpp:139
#, kde-format
msgid "You can use a scaled-down version of the picture you have set in your address book entry."
msgstr ""
#. +> trunk5 stable5
#: identity/xfaceconfigurator.cpp:144
#, kde-format
msgid "<qt>KMail can send a small (48x48 pixels), low-quality, monochrome picture with every message. For example, this could be a picture of you or a glyph. It is shown in the recipient's mail client (if supported).</qt>"
msgstr ""
#. +> trunk5 stable5
#: identity/xfaceconfigurator.cpp:163
#, kde-format
msgid "Use this field to enter an arbitrary X-Face string."
msgstr ""
#. +> trunk5 stable5
#: identity/xfaceconfigurator.cpp:167
#, kde-format
msgid "Examples are available at <a href=\"http://ace.home.xs4all.nl/X-Faces/\">http://ace.home.xs4all.nl/X-Faces/</a>."
"<qt>Are you sure you want to delete the search <b>%1</b>?<br />"
"Any messages it shows will still be available in their original folder.</qt>"
msgstr ""
#. +> trunk5 stable5
#: job/removecollectionjob.cpp:74
#, kde-format
msgctxt "@action:button Delete search"
msgid "&Delete"
msgstr ""
#. +> trunk5 stable5
#: job/removecollectionjob.cpp:76
#, kde-format
msgid "Delete Folder"
msgstr ""
#. +> trunk5 stable5
#: job/removecollectionjob.cpp:80
#, kde-format
msgid "<qt>Are you sure you want to delete the empty folder <b>%1</b>?</qt>"
msgstr ""
#. +> trunk5 stable5
#: job/removecollectionjob.cpp:84
#, kde-format
msgid ""
"<qt>Are you sure you want to delete the empty folder <resource>%1</resource> and all its subfolders? Those subfolders might not be empty and their contents will be discarded as well. "
"<p><b>Beware</b> that discarded messages are not saved into your Trash folder and are permanently deleted.</p>"
"</qt>"
msgstr ""
#. +> trunk5 stable5
#: job/removecollectionjob.cpp:93
#, kde-format
msgid ""
"<qt>Are you sure you want to delete the folder <resource>%1</resource>, discarding its contents? "
"<p><b>Beware</b> that discarded messages are not saved into your Trash folder and are permanently deleted.</p>"
"</qt>"
msgstr ""
#. +> trunk5 stable5
#: job/removecollectionjob.cpp:99
#, kde-format
msgid ""
"<qt>Are you sure you want to delete the folder <resource>%1</resource> and all its subfolders, discarding their contents? "
"<p><b>Beware</b> that discarded messages are not saved into your Trash folder and are permanently deleted.</p>"
msgid "Could not start \"PIM Setting Exporter\" program. Please check your installation."
msgstr ""
#. +> trunk5 stable5
#: kmlaunchexternalcomponent.cpp:103
#, kde-format
msgid "Unable to start \"PIM Setting Exporter\" program"
msgstr ""
#. +> trunk5 stable5
#: kmlaunchexternalcomponent.cpp:117
#, kde-format
msgid "Could not start the ImportWizard. Please make sure you have ImportWizard properly installed."
msgstr ""
#. +> trunk5 stable5
#: kmlaunchexternalcomponent.cpp:119
#, kde-format
msgid "Unable to start ImportWizard"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:312
#, kde-format
msgid "Another mailer was found on system. Do you want to import data from it?"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:315
#, kde-format
msgid "Could not start the import wizard. Please check your installation."
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:1372
#, kde-format
msgid "No Subject"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:1386
#, kde-format
msgid "(no templates)"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:1438
#, kde-format
msgid "This folder does not have any expiry options set"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:1447
#, kde-format
msgid "<qt>Are you sure you want to expire the folder <b>%1</b>?</qt>"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:1449
#, kde-format
msgid "Expire Folder"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:1450
#, kde-format
msgid "&Expire"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:1472
#, kde-format
msgid "Empty Trash"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:1472 util.cpp:187
#, kde-format
msgid "Move to Trash"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:1474
#, kde-format
msgid "Are you sure you want to empty the trash folder?"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:1475
#, kde-format
msgid "<qt>Are you sure you want to move all messages from folder <b>%1</b> to the trash?</qt>"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:1499
#, kde-format
msgid "Moved all messages to the trash"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:1554
#, kde-format
msgid "Are you sure you want to expire all old messages?"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:1555
#, kde-format
msgid "Expire Old Messages?"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:1555
#, kde-format
msgid "Expire"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:1570
#, kde-format
msgid "Loading external references in html mail will make you more vulnerable to \"spam\" and may increase the likelihood that your system will be compromised by other present and anticipated security exploits."
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:1573 kmmainwidget.cpp:4647
#, kde-format
msgid "Security Warning"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:1574
#, kde-format
msgid "Load External References"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:1646
#, kde-format
msgid ""
"<qt>Do you really want to delete the selected message?<br />"
"Once deleted, it cannot be restored.</qt>"
msgid_plural ""
"<qt>Do you really want to delete the %1 selected messages?<br />"
"Once deleted, they cannot be restored.</qt>"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:1652
#, kde-format
msgid "Delete Messages"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:1652
#, kde-format
msgid "Delete Message"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:1671
#, kde-format
msgid "Moving messages..."
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:1673 kmmainwidget.cpp:1864
#, kde-format
msgid "Deleting messages..."
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:1688 kmmainwidget.cpp:1884
#, kde-format
msgid "Messages deleted successfully."
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:1690
#, kde-format
msgid "Messages moved successfully."
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:1695 kmmainwidget.cpp:1897
#, kde-format
msgid "Deleting messages failed."
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:1697 kmmainwidget.cpp:1910
#, kde-format
msgid "Deleting messages canceled."
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:1701
#, kde-format
msgid "Moving messages failed."
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:1703
#, kde-format
msgid "Moving messages canceled."
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:1769
#, kde-format
msgid "Move Messages to Folder"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:1799
#, kde-format
msgid "Copying messages..."
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:1807
#, kde-format
msgid "Messages copied successfully."
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:1810
#, kde-format
msgid "Copying messages failed."
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:1812
#, kde-format
msgid "Copying messages canceled."
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:1822
#, kde-format
msgid "Copy Messages to Folder"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:1861
#, kde-format
msgid "Moving messages to trash..."
msgstr ""
#. +> trunk5
#: kmmainwidget.cpp:1868
#, kde-format
msgid "Deleting and moving messages to trash..."
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:1881
#, kde-format
msgid "Messages moved to trash successfully."
msgstr ""
#. +> trunk5
#: kmmainwidget.cpp:1888
#, kde-format
msgid "Messages moved to trash or deleted successfully"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:1894
#, kde-format
msgid "Moving messages to trash failed."
msgstr ""
#. +> trunk5
#: kmmainwidget.cpp:1901
#, kde-format
msgid "Deleting or moving messages to trash failed."
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:1907
#, kde-format
msgid "Moving messages to trash canceled."
msgstr ""
#. +> trunk5
#: kmmainwidget.cpp:1914
#, kde-format
msgid "Deleting or moving messages to trash canceled."
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:2186
#, kde-format
msgid "Jump to Folder"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:2818
#, kde-format
msgid "Save &As..."
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:2832
#, kde-format
msgid "&Expire All Folders"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:2837
#, kde-format
msgid "Check &Mail"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:2845
#, kde-format
msgid "Check Mail In"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:2847 kmmainwidget.cpp:2848
#, kde-format
msgid "Check Mail"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:2852
#, kde-format
msgid "&Send Queued Messages"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:2860
#, kde-format
msgid "Online status (unknown)"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:2865
#, kde-format
msgid "Send Queued Messages Via"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:2881
#, kde-format
msgid "Certificate Manager"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:2891
#, kde-format
msgid "&Import Messages..."
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:2901
#, kde-format
msgid "&Debug Sieve..."
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:2908
#, kde-format
msgid "Filter &Log Viewer..."
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:2913
#, kde-format
msgid "&Import from another Email Client..."
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:2918
#, kde-format
msgid "Edit \"Out of Office\" Replies..."
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:2924
#, kde-format
msgid "&Configure Automatic Archiving..."
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:2930
#, kde-format
msgid "Delayed Messages..."
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:2936
#, kde-format
msgid "Followup Reminder Messages..."
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:2947 util.cpp:184
#, kde-format
msgctxt "@action Hard delete, bypassing trash"
msgid "&Delete"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:2952 kmmainwidget.cpp:4013
#, kde-format
msgid "M&ove Thread to Trash"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:2956
#, kde-format
msgid "Move thread to trashcan"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:2959 kmmainwidget.cpp:4013
#, kde-format
msgid "Delete T&hread"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:2965 kmmainwidget.cpp:4015
#, kde-format
msgid "&Find Messages..."
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:2970
#, kde-format
msgid "Select &All Messages"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:2977
#, kde-format
msgid "&Mailing List Management..."
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:2982
#, kde-format
msgid "&Assign Shortcut..."
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:2998
#, kde-format
msgid "&Expiration Settings"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3014
#, kde-format
msgid "&Archive Folder..."
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3022
#, kde-format
msgid "Load E&xternal References"
msgstr ""
#. +> trunk5 stable5
-#: kmmainwidget.cpp:3045 kmreadermainwin.cpp:370
+#: kmmainwidget.cpp:3045 kmreadermainwin.cpp:383
#, kde-format
msgid "Copy Message To..."
msgstr ""
#. +> trunk5 stable5
-#: kmmainwidget.cpp:3047 kmreadermainwin.cpp:383
+#: kmmainwidget.cpp:3047 kmreadermainwin.cpp:396
#, kde-format
msgid "Move Message To..."
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3052
#, kde-format
msgid "&New Message..."
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3054
#, kde-format
msgctxt "@action:intoolbar New Empty Message"
msgid "New"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3062
#, kde-format
msgid "Message From &Template"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3072
#, kde-format
msgid "New Message t&o Mailing-List..."
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3080
#, kde-format
msgid "&Create Filter"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3085
#, kde-format
msgid "Filter on &Subject..."
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3092
#, kde-format
msgid "Filter on &From..."
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3098
#, kde-format
msgid "Filter on &To..."
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3104
#, kde-format
msgid "Filter on &Cc..."
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3112
#, kde-format
msgid "Mark &Thread"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3115
#, kde-format
msgid "Mark Thread as &Read"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3118
#, kde-format
msgid "Mark all messages in the selected thread as read"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3121
#, kde-format
msgid "Mark Thread as &Unread"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3124
#, kde-format
msgid "Mark all messages in the selected thread as unread"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3130
#, kde-format
msgid "Mark Thread as &Important"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3133
#, kde-format
msgid "Remove &Important Thread Mark"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3136
#, kde-format
msgid "Mark Thread as &Action Item"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3139
#, kde-format
msgid "Remove &Action Item Thread Mark"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3143
#, kde-format
msgid "&Watch Thread"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3147
#, kde-format
msgid "&Ignore Thread"
msgstr ""
#. +> trunk5 stable5
-#: kmmainwidget.cpp:3155 kmreadermainwin.cpp:340
+#: kmmainwidget.cpp:3155 kmreadermainwin.cpp:353
#, kde-format
msgid "Save A&ttachments..."
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3163
#, kde-format
msgid "Copy Decrypted To..."
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3169
#, kde-format
msgid "Appl&y All Filters"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3179
#, kde-format
msgctxt "View->"
msgid "&Expand Thread / Group"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3182
#, kde-format
msgid "Expand the current thread or group"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3186
#, kde-format
msgctxt "View->"
msgid "&Collapse Thread / Group"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3189
#, kde-format
msgid "Collapse the current thread or group"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3193
#, kde-format
msgctxt "View->"
msgid "Ex&pand All Threads"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3196
#, kde-format
msgid "Expand all threads in the current folder"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3200
#, kde-format
msgctxt "View->"
msgid "C&ollapse All Threads"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3203
#, kde-format
msgid "Collapse all threads in the current folder"
msgid "Go to the next folder with unread messages"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3279
#, kde-format
msgid "Previous Unread F&older"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3285
#, kde-format
msgid "Go to the previous folder with unread messages"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3289
#, kde-format
msgctxt "Go->"
msgid "Next Unread &Text"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3292
#, kde-format
msgid "Go to the next unread text"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3293
#, kde-format
msgid "Scroll down current message. If at end of current message, go to next unread message."
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3301
#, kde-format
msgid "Configure &Filters..."
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3307
#, kde-format
msgid "Manage &Sieve Scripts..."
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3312
#, kde-format
msgid "&Add Account..."
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3317
#, kde-format
msgid "KMail &Introduction"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3319
#, kde-format
msgid "Display KMail's Welcome Page"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3327
#, kde-format
msgid "Configure &Notifications..."
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3334
#, kde-format
msgid "&Configure KMail..."
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3341
#, kde-format
msgid "Expire..."
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3347
#, kde-format
msgid "Add Favorite Folder..."
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3353
#, kde-format
msgid "Serverside Subscription..."
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3359 kmmainwidget.cpp:3368
#, kde-format
msgid "Apply All Filters"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3387
#, kde-format
msgid "Import/Export KMail Data..."
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3393
#, kde-format
msgid "New AddressBook Contact..."
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3415
#, kde-format
msgid "Copy Message to Folder"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3422
#, kde-format
msgid "Jump to Folder..."
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3429
#, kde-format
msgid "Abort Current Operation"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3436
#, kde-format
msgid "Focus on Next Folder"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3443
#, kde-format
msgid "Focus on Previous Folder"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3450
#, kde-format
msgid "Select Folder with Focus"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3458
#, kde-format
msgid "Focus on First Folder"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3465
#, kde-format
msgid "Focus on Last Folder"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3472
#, kde-format
msgid "Focus on Next Message"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3479
#, kde-format
msgid "Focus on Previous Message"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3486
#, kde-format
msgid "Select First Message"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3493
#, kde-format
msgid "Select Last Message"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3500
#, kde-format
msgid "Select Message with Focus"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3508
#, kde-format
msgid "Set Focus to Quick Search"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3517
#, kde-format
msgid "Extend Selection to Previous Message"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3524
#, kde-format
msgid "Extend Selection to Next Message"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3532
#, kde-format
msgid "Move Message to Folder"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3543
#, kde-format
msgid "Use Less Bandwidth"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3547
#, kde-format
msgid "Mark All Messages As Read in This Folder and All its Subfolder"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3552
#, kde-format
msgid "Remove Duplicates in This Folder and All its Subfolder"
msgstr ""
#. +> trunk5
#: kmmainwidget.cpp:3557
#, kde-format
msgid "Account &Settings"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3568
#, kde-format
msgid "Add Favorite Folder"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3909
#, kde-format
msgid "E&mpty Trash"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:3910
#, kde-format
msgid "&Move All Messages to Trash"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:4003
#, kde-format
msgid "&Delete Search"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:4015
#, kde-format
msgid "Edit Search..."
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:4125
#, kde-format
msgid "&Undo"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:4127
#, kde-format
msgid "&Undo: \"%1\""
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:4179
#, kde-format
msgid "Filter %1"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:4636
#, kde-format
msgctxt "Show shortcut for focus quick search. Don't change it"
msgid "Search... <%1>"
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:4644
#, kde-format
msgid "Use of HTML in mail will make you more vulnerable to \"spam\" and may increase the likelihood that your system will be compromised by other present and anticipated security exploits."
msgstr ""
#. +> trunk5 stable5
#: kmmainwidget.cpp:4648
#, kde-format
msgid "Use HTML"
msgstr ""
#. +> trunk5 stable5
#: kmmainwin.cpp:174
#, kde-format
msgid "Starting..."
msgstr ""
#. +> trunk5 stable5
-#: kmreadermainwin.cpp:343 util.cpp:184
+#: kmreadermainwin.cpp:356 util.cpp:184
#, kde-format
msgid "&Move to Trash"
msgstr ""
#. +> trunk5 stable5
-#: kmreadermainwin.cpp:344
+#: kmreadermainwin.cpp:357
#, kde-format
msgctxt "@action:intoolbar Move to Trash"
msgid "Trash"
msgstr ""
#. +> trunk5 stable5
-#: kmreadermainwin.cpp:345
+#: kmreadermainwin.cpp:358
#, kde-format
msgid "Move message to trashcan"
msgstr ""
#. +> trunk5 stable5
-#: kmreadermainwin.cpp:429
+#: kmreadermainwin.cpp:442
#, kde-format
msgid "Cannot copy item. %1"
msgstr ""
-#. i18n: ectx: Menu (zoom)
-#. +> trunk5 stable5
-#: kmreadermainwin.rc:30
-#, kde-format
-msgid "Zoom"
-msgstr ""
-
#. +> trunk5 stable5
#: kmreaderwin.cpp:124
#, kde-format
msgid "New Message To..."
msgstr ""
#. +> trunk5 stable5
#: kmreaderwin.cpp:131
#, kde-format
msgid "Reply To..."
msgstr ""
#. +> trunk5 stable5
#: kmreaderwin.cpp:138
#, kde-format
msgid "Forward To..."
msgstr ""
#. +> trunk5 stable5
#: kmreaderwin.cpp:151
#, kde-format
msgid "Add to Existing Contact"
msgstr ""
#. +> trunk5 stable5
#: kmreaderwin.cpp:158
#, kde-format
msgid "Open in Address Book"
msgstr ""
#. +> trunk5 stable5
#: kmreaderwin.cpp:163
#, kde-format
msgid "Bookmark This Link"
msgstr ""
#. +> trunk5 stable5
#: kmreaderwin.cpp:169
#, kde-format
msgid "Edit contact..."
msgstr ""
#. +> trunk5 stable5
#: kmreaderwin.cpp:175
#, kde-format
msgid "Save Link As..."
msgstr ""
#. +> trunk5 stable5
#: kmreaderwin.cpp:181
#, kde-format
msgid "&Find in Message..."
msgstr ""
#. +> trunk5 stable5
#: kmreaderwin.cpp:187
#, kde-format
msgid "Save Image On Disk..."
msgstr ""
#. +> trunk5 stable5
#: kmreaderwin.cpp:193
#, kde-format
msgid "Show HTML Format"
msgstr ""
#. +> trunk5 stable5
#: kmreaderwin.cpp:194
#, kde-format
msgid "Show HTML format when mail comes from this contact"
msgstr ""
#. +> trunk5 stable5
#: kmreaderwin.cpp:200
#, kde-format
msgid "Load external reference when mail comes for this contact"
msgstr ""
#. +> trunk5 stable5
#: kmreaderwin.cpp:206
#, kde-format
msgid "Share image..."
msgstr ""
#. +> trunk5 stable5
#: kmreaderwin.cpp:253
#, kde-format
msgid "KMail is now based on the Akonadi Personal Information Management framework, which brings many changes all around."
msgstr ""
#. +> trunk5 stable5
#: kmreaderwin.cpp:264
#, kde-format
msgid "Push email (IMAP IDLE)"
msgstr ""
#. +> trunk5 stable5
#: kmreaderwin.cpp:265
#, kde-format
msgid "Improved searches"
msgstr ""
#. +> trunk5 stable5
#: kmreaderwin.cpp:266
#, kde-format
msgid "Support for adding notes (annotations) to mails"
msgstr ""
#. +> trunk5 stable5
#: kmreaderwin.cpp:267
#, kde-format
msgid "Less GUI freezes, mail checks happen in the background"
msgstr ""
#. +> trunk5 stable5
#: kmreaderwin.cpp:268
#, kde-format
msgid "Plugins support"
msgstr ""
#. +> trunk5 stable5
#: kmreaderwin.cpp:269
#, kde-format
msgid "New HTML renderer (QtWebEngine)"
msgstr ""
#. +> trunk5 stable5
#: kmreaderwin.cpp:270
#, kde-format
msgid "Added Check for Phishing URL"
msgstr ""
#. +> trunk5 stable5
#: kmreaderwin.cpp:300
#, kde-format
msgid "The KDE Mail Client"
msgstr ""
#. +> trunk5 stable5
#: kmreaderwin.cpp:309
#, kde-format
msgid "Retrieving Folder Contents"
msgstr ""
#. +> trunk5 stable5
#: kmreaderwin.cpp:310
#, kde-format
msgid "Please wait . . ."
msgstr ""
#. +> trunk5 stable5
#: kmreaderwin.cpp:317 kmreaderwin.cpp:328
#, kde-format
msgid "Offline"
msgstr ""
#. +> trunk5 stable5
#: kmreaderwin.cpp:319
#, kde-format
msgid "KMail is currently in offline mode. Click <a href=\"kmail:goOnline\">here</a> to go online . . .</p>"
msgstr ""
#. +> trunk5 stable5
#: kmreaderwin.cpp:330
#, kde-format
msgid "Account is currently in offline mode. Click <a href=\"kmail:goResourceOnline\">here</a> to go online . . .</p>"
msgid "Enable this option if you want to see the full path for each folder listed in the summary. If this option is not enabled, then only the base folder path will be shown."
msgstr ""
#. +> trunk5 stable5
#: kontactplugin/kmail/kmail_plugin.cpp:60
#, kde-format
msgctxt "@action:inmenu"
msgid "New Message..."
msgstr ""
#. +> trunk5 stable5
#: kontactplugin/kmail/kmail_plugin.cpp:67
#, kde-format
msgctxt "@info:whatsthis"
msgid "You will be presented with a dialog where you can create and send a new email message."
msgstr ""
#. +> trunk5 stable5
#: kontactplugin/kmail/kmail_plugin.cpp:74
#, kde-format
msgctxt "@action:inmenu"
msgid "Sync Mail"
msgstr ""
#. +> trunk5 stable5
#: kontactplugin/kmail/kmail_plugin.cpp:79
#, kde-format
msgctxt "@info:whatsthis"
msgid "Choose this option to synchronize your groupware email."
msgstr ""
#. +> trunk5 stable5
#: kontactplugin/kmail/summarywidget.cpp:64
#, kde-format
msgid "New Messages"
msgstr ""
#. +> trunk5 stable5
#: kontactplugin/kmail/summarywidget.cpp:161
#, kde-format
msgid ""
"<qt><b>%1</b><br/>"
"Total: %2<br/>"
"Unread: %3</qt>"
msgstr ""
#. +> trunk5 stable5
#: kontactplugin/kmail/summarywidget.cpp:173
#, kde-format
msgctxt "%1: number of unread messages %2: total number of messages"
msgid "%1 / %2"
msgstr ""
#. +> trunk5 stable5
#: kontactplugin/kmail/summarywidget.cpp:211
#, kde-format
msgid "No unread messages in your monitored folders"
msgid "Choosing this will show a dialog where you can select which summaries you want to see and also allow you to configure the summaries to your liking."
msgid "All folders selected are empty or were not indexed."
msgstr ""
#. +> trunk5 stable5
#: searchdialog/searchwindow.cpp:487
#, kde-format
msgid "You forgot to add conditions."
msgstr ""
#. +> trunk5 stable5
#: searchdialog/searchwindow.cpp:491
#, kde-format
msgid "Contains condition cannot be used with a number of characters inferior to 4."
msgstr ""
#. +> trunk5 stable5
#: searchdialog/searchwindow.cpp:528
#, kde-format
msgid "Searching..."
msgstr ""
#. +> trunk5 stable5
#: searchdialog/searchwindow.cpp:544
#, kde-format
msgid "Cannot get search result. %1"
msgstr ""
#. +> trunk5 stable5
#: searchdialog/searchwindow.cpp:547
#, kde-format
msgid "Search failed."
msgstr ""
#. +> trunk5 stable5
#: searchdialog/searchwindow.cpp:588
#, kde-format
msgid "Search complete."
msgstr ""
#. +> trunk5 stable5
#: searchdialog/searchwindow.cpp:626
#, kde-format
msgid "Search stopped."
msgstr ""
#. +> trunk5 stable5
#: searchdialog/searchwindow.cpp:683
#, kde-format
msgid "There was a problem renaming your search folder. A common reason for this is that another search folder with the same name already exists. Error returned \"%1\"."
msgstr ""
#. +> trunk5 stable5
#: searchdialog/searchwindow.cpp:786
#, kde-format
msgid "Copy Message"
msgid_plural "Copy %1 Messages"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: searchdialog/searchwindow.cpp:789
#, kde-format
msgid "Cut Message"
msgid_plural "Cut %1 Messages"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: searchdialog/searchwindow.cpp:917
#, kde-format
msgid "Checking index status..."
msgstr ""
#. +> trunk5 stable5
#: secondarywindow.cpp:84
#, kde-format
msgctxt "Document/application separator in titlebar"
msgid " – "
msgstr ""
#. i18n: ectx: whatsthis, entry (ExcludeImportantMailFromExpiry), group (Behaviour)
#. +> trunk5 stable5
#: settings/kmail.kcfg.cmake:50
#, kde-format
msgid "This prevents the automatic expiry of old messages in a folder from deleting (or moving to an archive folder) the messages that are marked 'Important' or 'Action Item'"
msgstr ""
#. i18n: ectx: label, entry (AllowLocalFlags), group (Behaviour)
#. +> trunk5 stable5
#: settings/kmail.kcfg.cmake:54
#, kde-format
msgid "Allow local flags in read-only folders"
msgstr ""
#. i18n: ectx: label, entry (SendOnCheck), group (Behaviour)
#. +> trunk5 stable5
#: settings/kmail.kcfg.cmake:60
#, kde-format
msgid "Send queued mail on mail check"
msgstr ""
#. i18n: ectx: whatsthis, entry (SendOnCheck), group (Behaviour)
#. +> trunk5 stable5
#: settings/kmail.kcfg.cmake:61
#, kde-format
msgid ""
"<qt>"
"<p>Select whether you want KMail to send all messages in the outbox on manual or all mail checks, or whether you do not want messages to be sent automatically at all. </p>"
"</qt>"
msgstr ""
#. i18n: ectx: whatsthis, entry (LastSelectedFolder), group (FolderSelectionDialog)
#. +> trunk5 stable5
#: settings/kmail.kcfg.cmake:73
#, kde-format
msgid "The most recently selected folder in the folder selection dialog."
msgstr ""
#. i18n: ectx: label, entry (ExternalEditor), group (General)
#. +> trunk5 stable5
#: settings/kmail.kcfg.cmake:88
#, kde-format
msgid "Specify e&ditor:"
msgstr ""
#. i18n: ectx: label, entry (UseExternalEditor), group (General)
#. +> trunk5 stable5
#: settings/kmail.kcfg.cmake:92
#, kde-format
msgid "Use e&xternal editor instead of composer"
msgstr ""
#. i18n: ectx: label, entry (CustomMessageHeadersCount), group (General)
#. +> trunk5 stable5
#: settings/kmail.kcfg.cmake:96
#, kde-format
msgid "Specifies the number of custom MIME header fields to be inserted in messages (for internal use only)"
msgstr ""
#. i18n: ectx: label, entry (CloseToQuotaThreshold), group (General)
#. +> trunk5 stable5
#: settings/kmail.kcfg.cmake:99
#, kde-format
msgid "The threshold for when to warn the user that a folder is nearing its quota limit."
msgstr ""
#. i18n: ectx: label, entry (EmptyTrashOnExit), group (General)
#. +> trunk5 stable5
#: settings/kmail.kcfg.cmake:103
#, kde-format
msgid "Empty the local trash folder on program exit"
msgstr ""
#. i18n: ectx: label, entry (DeleteMessageWithoutConfirmation), group (General)
#. +> trunk5 stable5
#: settings/kmail.kcfg.cmake:107
#, kde-format
msgid "Delete messages without confirmation"
msgstr ""
#. i18n: ectx: label, entry (StartSpecificFolderAtStartup), group (General)
#. +> trunk5 stable5
#: settings/kmail.kcfg.cmake:111
#, kde-format
msgid "Allow to start specific folder"
msgstr ""
#. i18n: ectx: label, entry (StartupFolder), group (General)
#. +> trunk5 stable5
#: settings/kmail.kcfg.cmake:115
#, kde-format
msgid "Specify the folder to open when the program is started"
msgstr ""
#. i18n: ectx: label, entry (AutoExpiring), group (General)
#. +> trunk5 stable5
#: settings/kmail.kcfg.cmake:122
#, kde-format
msgid "Specifies whether the folders will expire in the background (for internal use only)"
msgstr ""
#. i18n: ectx: label, entry (FirstStart), group (General)
#. +> trunk5 stable5
#: settings/kmail.kcfg.cmake:126
#, kde-format
msgid "Specifies whether this is the very first time that the application is run (for internal use only)"
msgstr ""
#. i18n: ectx: whatsthis, entry (PreviousNewFeaturesMD5), group (Internal)
#. +> trunk5 stable5
#: settings/kmail.kcfg.cmake:148
#, kde-format
msgid "This value is used to decide whether the KMail Introduction should be displayed."
msgstr ""
#. i18n: ectx: label, entry (EnableFolderQuickSearch), group (UserInterface)
#. +> trunk5 stable5
#: settings/kmail.kcfg.cmake:155
#, kde-format
msgid "Show folder quick search line edit"
msgstr ""
#. i18n: ectx: label, entry (ForwardingInlineByDefault), group (Composer)
#. +> trunk5 stable5
#: settings/kmail.kcfg.cmake:163
#, kde-format
msgid "Forward Inline As Default."
msgstr ""
#. i18n: ectx: label, entry (TooManyRecipients), group (Composer)
#. +> trunk5 stable5
#: settings/kmail.kcfg.cmake:166
#, kde-format
msgid "Warn if the number of recipients is more than:"
msgstr ""
#. i18n: ectx: whatsthis, entry (TooManyRecipients), group (Composer)
#. i18n: ectx: whatsthis, entry (RecipientThreshold), group (Composer)
msgid "If the number of recipients is larger than this value, KMail will warn and ask for a confirmation before sending the mail. The warning can be turned off."
msgstr ""
#. i18n: ectx: label, entry (CheckSpellingBeforeSend), group (Composer)
#. +> trunk5 stable5
#: settings/kmail.kcfg.cmake:196
#, kde-format
msgid "Check spelling before send"
msgstr ""
#. i18n: ectx: label, entry (RequestMDN), group (Composer)
#. i18n: ectx: whatsthis, entry (RequestMDN), group (Composer)
#. +> trunk5 stable5
#: settings/kmail.kcfg.cmake:201
#, kde-format
msgid ""
"<qt>"
"<p>Enable this option if you want KMail to request Message Disposition Notifications (MDNs) for each of your outgoing messages.</p>"
"<p>This option only affects the default; you can still enable or disable MDN requesting on a per-message basis in the composer, menu item <em>Options</em>-><em>Request Disposition Notification</em>.</p>"
"</qt>"
msgstr ""
#. i18n: ectx: label, entry (AutosaveInterval), group (Composer)
#. +> trunk5 stable5
#: settings/kmail.kcfg.cmake:223
#, kde-format
msgid "Autosave interval:"
msgstr ""
#. i18n: ectx: whatsthis, entry (AutosaveInterval), group (Composer)
#. +> trunk5 stable5
#: settings/kmail.kcfg.cmake:224
#, kde-format
msgid "A backup copy of the text in the composer window can be created regularly. The interval used to create the backups is set here. You can disable autosaving by setting it to the value 0."
msgstr ""
#. i18n: ectx: label, entry (ShowSnippetManager), group (Composer)
#. +> trunk5 stable5
#: settings/kmail.kcfg.cmake:231
#, kde-format
msgid "Show the Text Snippet Management and Insertion Panel in the composer."
msgstr ""
#. i18n: ectx: label, entry (CryptoStoreEncrypted), group (Composer)
#. +> trunk5 stable5
#: settings/kmail.kcfg.cmake:237
#, kde-format
msgid "When check, sent messages will be stored in the encrypted form"
msgstr ""
#. i18n: ectx: label, entry (RecentUrls), group (Composer)
#. +> trunk5 stable5
#: settings/kmail.kcfg.cmake:241
#, kde-format
msgid "A list of all the recently used URLs"
msgstr ""
#. i18n: ectx: label, entry (RecentEncodings), group (Composer)
#. +> trunk5 stable5
#: settings/kmail.kcfg.cmake:247
#, kde-format
msgid "A list of all the recently used encodings"
msgstr ""
#. i18n: ectx: label, entry (ShowCryptoLabelIndicator), group (Composer)
#. +> trunk5 stable5
#: settings/kmail.kcfg.cmake:253
#, kde-format
msgid "Show crypto label indicator"
msgstr ""
#. i18n: ectx: label, entry (CheckSendDefaultActionShortcut), group (Composer)
#. +> trunk5 stable5
#: settings/kmail.kcfg.cmake:257
#, kde-format
msgid "Validate Send Default Shortcut"
msgstr ""
#. i18n: ectx: label, entry (IdentityDialogSize), group (Geometry)
#. +> trunk5 stable5
#: settings/kmail.kcfg.cmake:274
#, kde-format
msgid "The size of the identity dialog (for internal use only)"
msgstr ""
#. i18n: ectx: label, entry (SearchWidgetWidth), group (Geometry)
#. +> trunk5 stable5
#: settings/kmail.kcfg.cmake:278
#, kde-format
msgid "The width of the search window (for internal use only)"
msgstr ""
#. i18n: ectx: label, entry (SearchWidgetHeight), group (Geometry)
#. +> trunk5 stable5
#: settings/kmail.kcfg.cmake:282
#, kde-format
msgid "The height of the search window (for internal use only)"
msgstr ""
#. i18n: ectx: label, entry (ConfigureDialogWidth), group (Geometry)
#. +> trunk5 stable5
#: settings/kmail.kcfg.cmake:286
#, kde-format
msgid "The width of the Configure KMail dialog (for internal use only)"
msgstr ""
#. i18n: ectx: label, entry (ConfigureDialogHeight), group (Geometry)
#. +> trunk5 stable5
#: settings/kmail.kcfg.cmake:290
#, kde-format
msgid "The height of the Configure KMail dialog (for internal use only)"
msgstr ""
#. i18n: ectx: label, entry (readerWindowMode), group (Geometry)
#. +> trunk5 stable5
#: settings/kmail.kcfg.cmake:316
#, kde-format
msgid "Message Preview Pane"
msgstr ""
#. i18n: ectx: label, entry (readerWindowMode), group (Geometry)
#. +> trunk5 stable5
#: settings/kmail.kcfg.cmake:319
#, kde-format
msgid "Do not show a message preview pane"
msgstr ""
#. i18n: ectx: label, entry (readerWindowMode), group (Geometry)
#. +> trunk5 stable5
#: settings/kmail.kcfg.cmake:322
#, kde-format
msgid "Show the message preview pane below the message list"
msgstr ""
#. i18n: ectx: label, entry (readerWindowMode), group (Geometry)
#. +> trunk5 stable5
#: settings/kmail.kcfg.cmake:325
#, kde-format
msgid "Show the message preview pane next to the message list"
msgstr ""
#. i18n: ectx: label, entry (FolderList), group (Geometry)
#. +> trunk5 stable5
#: settings/kmail.kcfg.cmake:332
#, kde-format
msgid "Folder List"
msgstr ""
#. i18n: ectx: label, entry (FolderList), group (Geometry)
#. +> trunk5 stable5
#: settings/kmail.kcfg.cmake:335
#, kde-format
msgid "Long folder list"
msgstr ""
#. i18n: ectx: label, entry (FolderList), group (Geometry)
#. +> trunk5 stable5
#: settings/kmail.kcfg.cmake:338
#, kde-format
msgid "Short folder list"
msgstr ""
#. i18n: ectx: label, entry (TemplateNewMessage), group (GlobalTemplates)
#. +> trunk5 stable5
#: settings/kmail.kcfg.cmake:347
#, kde-format
msgid "Message template for new message"
msgstr ""
#. i18n: ectx: label, entry (TemplateReply), group (GlobalTemplates)
#. +> trunk5 stable5
#: settings/kmail.kcfg.cmake:352
#, kde-format
msgid "Message template for reply"
msgstr ""
#. i18n: ectx: label, entry (TemplateReplyAll), group (GlobalTemplates)
#. +> trunk5 stable5
#: settings/kmail.kcfg.cmake:357
#, kde-format
msgid "Message template for reply to all"
msgstr ""
#. i18n: ectx: label, entry (TemplateForward), group (GlobalTemplates)
#. +> trunk5 stable5
#: settings/kmail.kcfg.cmake:362
#, kde-format
msgid "Message template for forward"
msgstr ""
#. i18n: ectx: label, entry (QuoteString), group (GlobalTemplates)
#. +> trunk5 stable5
#: settings/kmail.kcfg.cmake:367
#, kde-format
msgid "Quote characters"
msgstr ""
#. i18n: ectx: label, entry (ToolTipDisplayPolicy), group (MainFolderView)
#. +> trunk5 stable5
#: settings/kmail.kcfg.cmake:382
#, kde-format
msgid "Specifies the policy used when displaying policy"
msgstr ""
#. i18n: ectx: label, entry (CollectionWidth), group (SearchDialog)
#. +> trunk5 stable5
#: settings/kmail.kcfg.cmake:390
#, kde-format
msgid "Specifies the width of the collection field in the Search Window dialog (for internal use only)"
msgstr ""
#. i18n: ectx: label, entry (SubjectWidth), group (SearchDialog)
#. +> trunk5 stable5
#: settings/kmail.kcfg.cmake:394
#, kde-format
msgid "Specifies the width of the subject field in the Search Window dialog (for internal use only)"
msgstr ""
#. i18n: ectx: label, entry (SenderWidth), group (SearchDialog)
#. +> trunk5 stable5
#: settings/kmail.kcfg.cmake:398
#, kde-format
msgid "Specifies the width of the sender field in the Search Window dialog (for internal use only)"
msgstr ""
#. i18n: ectx: label, entry (ReceiverWidth), group (SearchDialog)
#. +> trunk5 stable5
#: settings/kmail.kcfg.cmake:402
#, kde-format
msgid "Specifies the width of the receiver field in the Search Window dialog (for internal use only)"
msgstr ""
#. i18n: ectx: label, entry (DateWidth), group (SearchDialog)
#. +> trunk5 stable5
#: settings/kmail.kcfg.cmake:406
#, kde-format
msgid "Specifies the width of the date field in the Search Window dialog (for internal use only)"
msgstr ""
#. i18n: ectx: label, entry (FolderWidth), group (SearchDialog)
#. +> trunk5 stable5
#: settings/kmail.kcfg.cmake:410
#, kde-format
msgid "Specifies the width of the folder field in the Search Window dialog (for internal use only)"
msgid "When this option is enabled, the message/file will not only be encrypted with the receiver's public key, but also with your key. This will enable you to decrypt the message/file at a later time. This is generally a good idea."
"When this box is checked, sent messages are stored encrypted like they were sent. This is not recommended, as you will not be able to read the messages any longer if a necessary certificate expires.\n"
"<p>\n"
"However, there may be local rules that require you to turn this option on. When in doubt, check with your local administrator.\n"
msgid "When this option is enabled, the application will always show you a list of public keys from which you can choose the one it will use for encryption. If it is off, the application will only show the dialog if it cannot find the right key or if there are several which could be used."
msgid "Some of the folders you want to search in are not fully indexed yet or have been excluded from indexing. All the folders checked below will be scheduled for priority reindexing. If you uncheck a folder it may still be indexed later, unless it was manually excluded from indexing."
"<p style=\" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">When jumping to the next unread message, it may occur that no more unread messages are below the current message.</p>"
"\n"
"<p style=\" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-weight:600;\">Do not loop:</span> The search will stop at the last message in the current folder.</p>"
"\n"
"<p style=\" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-weight:600;\">Loop in current folder:</span> The search will continue at the top of the message list, but not go to another folder.</p>"
"\n"
"<p style=\" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-weight:600;\">Loop in all folders:</span> The search will continue at the top of the message list. If no unread messages are found it will then continue to the next folder.</p>"
"\n"
"<p style=\" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Similarly, when searching for the previous unread message, the search will start from the bottom of the message list and continue to the previous folder depending on which option is selected.</p>"
"\n"
"<p style=\" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-weight:600;\">Loop in all marked folders: </span>This is the same as \"Loop in all folders\" except that only folders are taken into account which have been marked with the folder property \"Act on new/unread mail in this folder\".</p>"
msgid "<b>WARNING:</b> Allowing HTML in email may increase the risk that your system will be compromised by present and anticipated security exploits. <a href=\"whatsthis1\">More about HTML mails...</a> <a href=\"whatsthis2\">More about external references...</a>"
"<p>Messages sometimes come in both formats. This option controls whether you want the HTML part or the plain text part to be displayed.</p>"
"<p>Displaying the HTML part makes the message look better, but at the same time increases the risk of security holes being exploited.</p>"
"<p>Displaying the plain text part loses much of the message's formatting, but makes it almost <em>impossible</em> to exploit security holes in the HTML renderer (Konqueror).</p>"
"<p>The option below guards against one common misuse of HTML messages, but it cannot guard against security issues that were not known at the time this version of KMail was written.</p>"
"<p>It is therefore advisable to <em>not</em> prefer HTML to plain text.</p>"
"<p><b>Note:</b> You can set this option on a per-folder basis from the <i>Folder</i> menu of KMail's main window.</p>"
"<p>Some mail advertisements are in HTML and contain references to, for example, images that the advertisers employ to find out that you have read their message (\"web bugs\").</p>"
"<p>There is no valid reason to load images off the Internet like this, since the sender can always attach the required images directly to the message.</p>"
"<p>To guard from such a misuse of the HTML displaying feature of KMail, this option is <em>disabled</em> by default.</p>"
"<p>However, if you wish to, for example, view images in HTML messages that were not attached to it, you can enable this option, but you should be aware of the possible problem.</p>"
"<p>MDNs are a generalization of what is commonly called <b>read receipt</b>. The message author requests a disposition notification to be sent and the receiver's mail program generates a reply from which the author can learn what happened to his message. Common disposition types include <b>displayed</b> (i.e. read), <b>deleted</b> and <b>dispatched</b> (e.g. forwarded).</p>"
"<p>The following options are available to control KMail's sending of MDNs:</p>"
"<ul>"
"<li><em>Ignore</em>: Ignores any request for disposition notifications. No MDN will ever be sent automatically (recommended).</li>"
"<li><em>Ask</em>: Answers requests only after asking the user for permission. This way, you can send MDNs for selected messages while denying or ignoring them for others.</li>"
"<li><em>Deny</em>: Always sends a <b>denied</b> notification. This is only <em>slightly</em> better than always sending MDNs. The author will still know that the messages has been acted upon, he just cannot tell whether it was deleted or read etc.</li>"
"<li><em>Always send</em>: Always sends the requested disposition notification. That means that the author of the message gets to know when the message was acted upon and, in addition, what happened to it (displayed, deleted, etc.). This option is strongly discouraged, but since it makes much sense e.g. for customer relationship management, it has been made available.</li>"
msgid "If this option is selected, S/MIME certificates are validated online using the Online Certificates Status Protocol (OCSP). Fill in the URL of the OCSP responder below."
msgid "By default GnuPG uses the file ~/.gnupg/policies.txt to check if a certificate policy is allowed. If this option is selected, policies are not checked."
msgid "When looking for the location of a CRL, the to-be-tested certificate usually contains what are known as \"CRL Distribution Point\" (DP) entries, which are URLs describing the way to access the URL. The first found DP entry is used. With this option all entries using the HTTP scheme are ignored when looking for a suitable DP."
msgid "If this option is selected, the value of the HTTP proxy shown on the right (which comes from the environment variable http_proxy) will be used for any HTTP request."
msgid "Enter here the location of your HTTP Proxy, which will be used for all HTTP requests relating to S/MIME. The syntax is host:port, for instance myproxy.nowhere.com:3128."
msgid "When looking for the location of a CRL, the to-be-tested certificate usually contains what are known as \"CRL Distribution Point\" (DP) entries, which are URLs describing the way to access the URL. The first found DP entry is used. With this option all entries using the LDAP scheme are ignored when looking for a suitable DP."
"Entering a LDAP server here will make all LDAP requests go to that server first. More precisely, this setting overrides any specified host and port part in a LDAP URL and will also be used if host and port have been omitted from the URL. Other LDAP servers will be used only if the connection to the \"proxy\" failed.\n"
"The syntax is \"HOST\" or \"HOST:PORT\". If PORT is omitted, port 389 (standard LDAP port) is used."
"<p>Regular expression matching the names of the headers to output diagnostics from. Diagnostics from the main file of each translation unit are always displayed. Can be used together with -line-filter.</p>"
+"Language-Team: LANGUAGE <kde-i18n-doc@kde.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. (itstool) path: component/name
+#. +> trunk5
+#: kube.appdata.xml.in:6
+msgid "Kube"
+msgstr ""
+
+#. (itstool) path: component/summary
+#. +> trunk5
+#: kube.appdata.xml.in:7
+msgid "E-mail client"
+msgstr ""
+
+#. (itstool) path: description/p
+#. +> trunk5
+#: kube.appdata.xml.in:9
+msgid "Kube is a modern communication and collaboration client built with QtQuick on top of a high performance, low resource usage core. It provides online and offline access to all your mail, contacts, calendars, notes, todo's and more. With a strong focus on usability, the team works with designers and UX experts from the ground up, to build a product that is not only visually appealing but also a joy to use."
+msgstr ""
+
+#. (itstool) path: description/p
+#. +> trunk5
+#: kube.appdata.xml.in:10
+msgid "Communication and collaboration within large groups and spread over several time zones is complex and something of the norm in modern projects and the existing solutions available are not up to that challenge. Kube is a way to simplify and make communication elegant again by focusing on the key needs of users instead of filling it with any feature that comes to mind. Our strict focus on what is actually needed instead of what is wanted brings a new way of collaboration between group members and a simpler way of handling communication."
msgid "Usually some of the Okular developers hang there."
msgstr ""
#. +> trunk
#: contact.php:34
msgid "Forum"
msgstr ""
#. +> trunk
#: contact.php:37
msgid "If you prefer using a forum you can use <a href='http://forum.kde.org/viewforum.php?f=251'>the Okular forum</a> inside the bigger <a href='http://forum.kde.org/'>KDE Community Forums</a>."
msgstr ""
#. +> trunk
#: contact.php:40
msgid "Bugs and Wishes"
msgstr ""
#. +> trunk
#: contact.php:43
msgid "Bugs and Wishes should be reported to the KDE bug tracker at <a href='http://bugs.kde.org'>http://bugs.kde.org</a>."
msgstr ""
#. +> trunk
#: download.php:4 menu.inc:8
msgid "Download"
msgstr ""
#. +> trunk
#: download.php:10
msgid "Binary packages"
msgstr ""
#. +> trunk
#: download.php:12
msgid "The recommended way for end-user installations of Okular is using binary packages:"
msgstr ""
#. +> trunk
#: download.php:15
msgid "For GNU/Linux and the BSDs use the package manager to find the Okular package (might be part of the broader kdegraphics package) and install it."
msgstr ""
#. +> trunk
#: download.php:16
msgid "For Windows have a look at the <a href='http://windows.kde.org/'>KDE on Windows Initiative</a> webpage for information on how to install KDE on Windows."
msgstr ""
#. +> trunk
#: download.php:17
msgid "For Mac Os X have a look at the <a href='http://mac.kde.org/'>KDE on Mac OS X</a> webpage for information on how to install KDE on Mac OS X."
msgstr ""
#. +> trunk
#: download.php:20
msgid "Packaging status"
msgstr ""
#. +> trunk
#: download.php:22
msgid "N.B: The table above refers to the KDE Applications release version that Okular was part of. The actual Okular version as reported by the About dialog is different, e.g. Okular 1.2.1 was released as part of KDE Applications 17.08.1 and would should up with such number in the table."
msgstr ""
#. +> trunk
#: download.php:25
msgid "Compiling Okular from source"
msgstr ""
#. +> trunk
#: download.php:28
msgid "If you want to compile Okular, you need to have an already set up compilation environment."
msgstr ""
#. +> trunk
#: download.php:30
msgid "Distributions should provide development packages usable for compiling KDE applications."
msgstr ""
#. +> trunk
#: download.php:32
msgid "In case you want to compile the development version of Okular, please refer to <a href='%1'>Build from source</a> at KDE's Community Wiki."
msgstr ""
#. +> trunk
#: download.php:36
msgid ""
"If you are interested in stable tarballs of Okular visit the\n"
"<a href='http://download.kde.org/stable/applications/'>KDE Applications download folder</a> and download the okular tarball."
msgstr ""
#. +> trunk
#: download.php:40
msgid "Optional packages"
msgstr ""
#. +> trunk
#: download.php:43
msgid "There are some optional package you could install in order to have some more functionalities in Okular."
msgstr ""
#. +> trunk
#: download.php:45
msgid "Some are already packaged for your distro, but other maybe not. So, if possible, use the packages your distro ships."
msgstr ""
#. +> trunk
#: download.php:48
msgid "Poppler (PDF backend)"
msgstr ""
#. +> trunk
#: download.php:51
msgid "To compile the PDF backend, you need the Poppler library (<a href='http://poppler.freedesktop.org'>http://poppler.freedesktop.org</a>)."
msgstr ""
#. +> trunk
#: download.php:53
msgid "The minimum version required is poppler 0.24"
msgstr ""
#. +> trunk
#: download.php:56
msgid "Libspectre (PostScript backend)"
msgstr ""
#. +> trunk
#: download.php:59
msgid "In order to compile and use the PostScipt (PS) backend, you need libspectre >= 0.2."
msgstr ""
#. +> trunk
#: download.php:61
msgid "If your distro does not package libspectre, or the packaged version is not enough, you can download it from <a href='http://libspectre.freedesktop.org'>http://libspectre.freedesktop.org</a>."
msgstr ""
#. +> trunk
#: download.php:64
msgid "DjVuLibre (DjVu backend)"
msgstr ""
#. +> trunk
#: download.php:67
msgid "To compile the DjVu backend, you need DjVuLibre >= 3.5.17."
msgstr ""
#. +> trunk
#: download.php:69
msgid "If your distro does not package DjVuLibre, or the packaged version is not enough, you can download it from <a href='http://djvulibre.djvuzone.org'>http://djvulibre.djvuzone.org</a>."
msgstr ""
#. +> trunk
#: download.php:72
msgid "libTIFF (TIFF/fax backend)"
msgstr ""
#. +> trunk
#: download.php:75
msgid "libTIFF is needed to compile the TIFF/fax backend. Currently there is no minimum required version, so any quite recent version of the library available from your distro should work. In case of troubles with that, do not hesitate to contact the <a href='contact.php'>Okular developers</a>."
msgstr ""
#. +> trunk
#: download.php:78
msgid "libCHM (CHM backend)"
msgstr ""
#. +> trunk
#: download.php:81
msgid "libCHM is needed to compile the CHM backend. Currently there is no minimum required version, so any quite recent version of the library available from your distro should work. In case of troubles with that, do not hesitate to contact the <a href='contact.php'>Okular developers</a>."
msgstr ""
#. +> trunk
#: download.php:84
msgid "Libepub (EPub backend)"
msgstr ""
#. +> trunk
#: download.php:87
msgid "In order to compile and use the EPub backend, you need the epub library."
msgstr ""
#. +> trunk
#: download.php:89
msgid "If your distro does not package libepub, or the packaged version is not enough, you can download it from <a href='http://sourceforge.net/projects/ebook-tools'>http://sourceforge.net/projects/ebook-tools</a>."
msgstr ""
#. +> trunk
#: download.php:99
msgid "You can download and compile Okular this way:"
msgstr ""
#. +> trunk
#: download.php:112
msgid "If you install Okular in a different path than your system install directory it is possible that you need to run"
msgstr ""
#. +> trunk
#: download.php:118
msgid "so that the correct Okular instance and libraries are picked up. Obviously you need to replace x86_64-linux-gnu with the correct name for your architecture."
msgstr ""
#. +> trunk
#: faq.php:4
msgid "Frequently Asked Questions"
msgstr ""
#. +> trunk
#: faq.php:12
msgid "Compiling Okular"
msgstr ""
#. +> trunk
#: faq.php:14
msgid "The Poppler backend does not compile. It complains about 'class Poppler::TextBox' and 'edge'."
msgstr ""
#. +> trunk
#: faq.php:15
msgid "Do you get an error output similar to"
msgstr ""
#. +> trunk
#: faq.php:39
msgid "If so, most probably you updated from Poppler 0.6.x or previous to Poppler 0.8."
msgstr ""
#. +> trunk
#: faq.php:41
msgid "What you can do is simple:"
msgstr ""
#. +> trunk
#: faq.php:43
msgid "in the build directory of Okular. Then run cmake again, and all should work as expected."
msgstr ""
#. +> trunk
#: faq.php:45
msgid "Running Okular"
msgstr ""
#. +> trunk
#: faq.php:47
msgid "Okular tells me there are no plugins installed. What can I do?"
msgstr ""
#. +> trunk
#: faq.php:48
msgid "In a shell set up for your KDE 4 installation, execute the command"
msgstr ""
#. +> trunk
#: faq.php:50
msgid "After that, Okular should find its plugins as expected."
msgstr ""
#. +> trunk
#: faq.php:52
msgid "General usage"
msgstr ""
#. +> trunk
#: faq.php:54
msgid "Why the newly added annotations are not in my PDF document?"
msgstr ""
#. +> trunk
#: faq.php:55
msgid ""
"By default, Okular saves annotations in the local data directory\n"
"for each user. Since KDE 4.9, it's optionally possible to store them directly in\n"
"a PDF file by choosing \"File -> Save As...\", so they can be seen in other\n"
"PDF viewers."
msgstr ""
#. +> trunk
#: faq.php:60
msgid ""
"Note that this feature requires Poppler 0.20 or newer for regular PDF\n"
"documents. If the PDF document you are annotating is encrypted, this feature\n"
"requires Poppler 0.22 or newer."
msgstr ""
#. +> trunk
#: faq.php:64
msgid "How can I annotate a document and send it to a friend/colleague/etc?"
msgstr ""
#. +> trunk
#: faq.php:65
msgid ""
"Since KDE 4.2, Okular has the \"document archiving\" feature. This is\n"
"an Okular-specific format for carrying the document plus various metadata\n"
"related to it (currently only annotations)."
msgstr ""
#. +> trunk
#: faq.php:69
msgid ""
"You can save a \"document archive\" from the open document by choosing \"File\n"
"-> Export As -> Document Archive\"."
msgstr ""
#. +> trunk
#: faq.php:72
msgid ""
"To open an Okular document archive, just open it with Okular as it would be eg\n"
"a PDF document."
msgstr ""
#. +> trunk
#: faq.php:75
msgid ""
"If you're annotating a PDF document, you can also save annotations\n"
"directly in the PDF file (see previous question)"
msgstr ""
#. +> trunk
#: faq.php:78
msgid ""
"Using Ubuntu, I cannot read CHM and EPub documents,\n"
"even if I have okular-extra-backends and libchm1 installed. Why?"
msgstr ""
#. +> trunk
#: faq.php:80
msgid ""
"Ubuntu (thus Kubuntu as well) packages of Okular are compiled without\n"
"the support for these two formats."
msgstr ""
#. +> trunk
#: faq.php:83
msgid "The reason is explained in the following Launchpad report: "
msgstr ""
#. +> trunk
#: faq.php:87
msgid "Why the speak options in the Tools menu are grayed out?"
msgstr ""
#. +> trunk
#: faq.php:87
msgid "Because you don't have the KDE Text To Speech tools, install Jovie (formerly known as ktts) and they should be enabled"
msgstr ""
#. +> trunk
#: faq.php:89
msgid "Some characters are not rendered and when enabling debug some lines mention 'Missing language pack for xxx'"
msgstr ""
#. +> trunk
#: faq.php:89
msgid "Install the poppler-data package"
msgstr ""
#. +> trunk
#: formats.php:4
msgid "Document format handlers status"
msgstr ""
#. +> trunk
#: formats.php:60
msgid "Document Format Handlers"
msgstr ""
#. +> trunk
#: formats.php:61
msgid "This page always refers to the stable series of Okular (currently KDE <b>4.5.x</b>)."
msgstr ""
#. +> trunk
#: formats.php:64
msgid "Features/Formats"
msgstr ""
#. +> trunk
#: formats.php:65
msgid "Main library used"
msgstr ""
#. +> trunk
#: formats.php:66
msgid "Loading"
msgstr ""
#. +> trunk
#: formats.php:67
msgid "Rendering"
msgstr ""
#. +> trunk
#: formats.php:68
msgid "Threaded rendering"
msgstr ""
#. +> trunk
#: formats.php:69
msgid "Document information"
msgstr ""
#. +> trunk
#: formats.php:70
msgid "TOC"
msgstr ""
#. +> trunk
#: formats.php:71
msgid "Font information"
msgstr ""
#. +> trunk
#: formats.php:72
msgid "Text extraction"
msgstr ""
#. +> trunk
#: formats.php:73
msgid "Links"
msgstr ""
#. +> trunk
#: formats.php:74
msgid "Paper Size"
msgstr ""
#. +> trunk
#: formats.php:75
msgid "Printing"
msgstr ""
#. +> trunk
#: formats.php:76
msgid "Text Exporting"
msgstr ""
#. +> trunk
#: formats.php:77
msgid "<b>Other Features</b>"
msgstr ""
#. +> trunk
#: formats.php:78
msgid "Annotations"
msgstr ""
#. +> trunk
#: formats.php:79
msgid "Forms"
msgstr ""
#. +> trunk
#: formats.php:80
msgid "Inverse search"
msgstr ""
#. +> trunk
#: formats.php:81
msgid "Document Rights"
msgstr ""
#. +> trunk
#: formats.php:82
msgid "Embedded files"
msgstr ""
#. +> trunk
#: formats.php:83
msgid "Sounds"
msgstr ""
#. +> trunk
#: formats.php:84
msgid "Movies"
msgstr ""
#. +> trunk
#: index.php:9
msgid "What is it?"
msgstr ""
#. +> trunk
#: index.php:12
msgid "Okular logo"
msgstr ""
#. +> trunk
#: index.php:16
msgid "Okular is a universal document viewer based developed by <a href='%1'>KDE</a>. Okular works on multiple platforms, including but not limited to Linux, Windows, Mac OS X, *BSD, etc."
msgstr ""
#. +> trunk
#: index.php:18
msgid "The last stable release is Okular %1, shipped as part of the <a href='%2'>KDE Applications %3 release</a>."
msgstr ""
#. +> trunk
#: index.php:22
msgid "Okular combines the excellent functionalities with the versatility of supporting different kind of documents, like PDF, Postscript, DjVu, CHM, XPS, ePub and others."
msgstr ""
#. +> trunk
#: index.php:26
msgid "The <a href='formats.php'>document format handlers page</a> has a chart describing in more detail the supported formats and the features supported in each of them."
msgstr ""
#. +> trunk
#: index.php:30
msgid "If you are interested in contributing to Okular, please <a href='contact.php'>contact us</a>."
msgstr ""
#. +> trunk
#: index.php:34
msgid "If you do not want or can not contribute, testers are fully welcome, so follow <a href='download.php'>these instructions</a> to see how to download and build Okular."
msgstr ""
#. +> trunk
#: index.php:43
msgid "Okular is a <a href='http://pdfreaders.org/' target='_blank'>Free Software PDF reader</a>."
msgstr ""
#. +> trunk
#: menu.inc:4
msgid "Okular Homepage"
msgstr ""
#. +> trunk
#: menu.inc:7
msgid "Main"
msgstr ""
#. +> trunk
#: menu.inc:9
msgid "Format support"
msgstr ""
#. +> trunk
#: menu.inc:10 news.php:4
msgid "Development News"
msgstr ""
#. +> trunk
#: menu.inc:11 screenshots.php:5
msgid "Screenshots"
msgstr ""
#. +> trunk
#: menu.inc:12
msgid "FAQ"
msgstr ""
#. +> trunk
#: menu.inc:13 team.php:4
msgid "Team"
msgstr ""
#. +> trunk
#: menu.inc:16
msgid "Related apps/projects"
msgstr ""
#. +> trunk
#: menu.inc:18
msgid "Free Software PDF readers"
msgstr ""
#. +> trunk
#: news.rdf:6 news.rdf:9
#, kde-format
msgid "Okular news"
msgstr ""
#. +> trunk
#: news.rdf:11
#, kde-format
-msgid "Okular 1.4 released"
+msgid "Okular 1.5 released"
msgstr ""
#. +> trunk
#: news.rdf:12
#, kde-format
-msgid "April 19, 2018"
+msgid "August 16, 2018"
msgstr ""
#. +> trunk
#: news.rdf:13
#, kde-format
-msgid "The 1.4 version of Okular has been released together with KDE Applications 18.04 release. This release introduces improved JavaScript support in PDF files and supports PDF rendering cancelling, which means that if you have a complex PDF file and you change the zoom while it's rendering it will cancel immediately instead of waiting for the render to finish. You can check the full changelog at <a href='https://www.kde.org/announcements/fulllog_applications.php?version=18.04.0#okular'>https://www.kde.org/announcements/fulllog_applications.php?version=18.04.0#okular</a>. Okular 1.4 is a recommended update for everyone using Okular."
+msgid "The 1.5 version of Okular has been released together with KDE Applications 18.08 release. This release introduces Form improvements among various other fixes and small features. You can check the full changelog at <a href='https://www.kde.org/announcements/fulllog_applications.php?version=18.08.0#okular'>https://www.kde.org/announcements/fulllog_applications.php?version=18.08.0#okular</a>. Okular 1.5 is a recommended update for everyone using Okular."
msgstr ""
#. +> trunk
#: news.rdf:16
#, kde-format
-msgid "Okular 1.3 released"
+msgid "Okular 1.4 released"
msgstr ""
#. +> trunk
#: news.rdf:17
#, kde-format
-msgid "December 14, 2017"
+msgid "April 19, 2018"
msgstr ""
#. +> trunk
#: news.rdf:18
#, kde-format
-msgid "The 1.3 version of Okular has been released together with KDE Applications 17.12 release. This release introduces changes to how saving annotations and form data works, supports partial rendering updates for files that take long time to render, makes text links interactive on text selection mode, adds a Share option in the File menu, adds Markdown support and fixes some issues regarding HiDPI support. You can check the full changelog at <a href='https://www.kde.org/announcements/fulllog_applications.php?version=17.12.0#okular'>https://www.kde.org/announcements/fulllog_applications.php?version=17.12.0#okular</a>. Okular 1.3 is a recommended update for everyone using Okular."
+msgid "The 1.4 version of Okular has been released together with KDE Applications 18.04 release. This release introduces improved JavaScript support in PDF files and supports PDF rendering cancelling, which means that if you have a complex PDF file and you change the zoom while it's rendering it will cancel immediately instead of waiting for the render to finish. You can check the full changelog at <a href='https://www.kde.org/announcements/fulllog_applications.php?version=18.04.0#okular'>https://www.kde.org/announcements/fulllog_applications.php?version=18.04.0#okular</a>. Okular 1.4 is a recommended update for everyone using Okular."
msgstr ""
#. +> trunk
#: news.rdf:21
#, kde-format
-msgid "Okular 1.2 released"
+msgid "Okular 1.3 released"
msgstr ""
#. +> trunk
#: news.rdf:22
#, kde-format
-msgid "August 17, 2017"
+msgid "December 14, 2017"
msgstr ""
#. +> trunk
#: news.rdf:23
#, kde-format
-msgid "The 1.2 version of Okular has been released together with KDE Applications 17.08 release. This release introduces minor bugfixes and improvements. You can check the full changelog at <a href='https://www.kde.org/announcements/fulllog_applications.php?version=17.08.0#okular'>https://www.kde.org/announcements/fulllog_applications.php?version=17.08.0#okular</a>. Okular 1.2 is a recommended update for everyone using Okular."
+msgid "The 1.3 version of Okular has been released together with KDE Applications 17.12 release. This release introduces changes to how saving annotations and form data works, supports partial rendering updates for files that take long time to render, makes text links interactive on text selection mode, adds a Share option in the File menu, adds Markdown support and fixes some issues regarding HiDPI support. You can check the full changelog at <a href='https://www.kde.org/announcements/fulllog_applications.php?version=17.12.0#okular'>https://www.kde.org/announcements/fulllog_applications.php?version=17.12.0#okular</a>. Okular 1.3 is a recommended update for everyone using Okular."
msgstr ""
#. +> trunk
#: news.rdf:26
#, kde-format
-msgid "Okular 1.1 released"
+msgid "Okular 1.2 released"
msgstr ""
#. +> trunk
#: news.rdf:27
#, kde-format
-msgid "April 20, 2017"
+msgid "August 17, 2017"
msgstr ""
#. +> trunk
#: news.rdf:28
#, kde-format
-msgid "The 1.1 version of Okular has been released together with KDE Applications 17.04 release. This release introduces annotation resize functionality, support for automatic calculation of form contents, touch screen improvements and more! You can check the full changelog at <a href='https://www.kde.org/announcements/fulllog_applications.php?version=17.04.0#okular'>https://www.kde.org/announcements/fulllog_applications.php?version=17.04.0#okular</a>. Okular 1.1 is a recommended update for everyone using Okular."
+msgid "The 1.2 version of Okular has been released together with KDE Applications 17.08 release. This release introduces minor bugfixes and improvements. You can check the full changelog at <a href='https://www.kde.org/announcements/fulllog_applications.php?version=17.08.0#okular'>https://www.kde.org/announcements/fulllog_applications.php?version=17.08.0#okular</a>. Okular 1.2 is a recommended update for everyone using Okular."
msgstr ""
#. +> trunk
#: news.rdf:31
#, kde-format
-msgid "Okular 1.0 released"
+msgid "Okular 1.1 released"
msgstr ""
#. +> trunk
#: news.rdf:32
#, kde-format
-msgid "December 15, 2016"
+msgid "April 20, 2017"
msgstr ""
#. +> trunk
#: news.rdf:33
#, kde-format
-msgid "The 1.0 version of Okular has been released together with KDE Applications 16.12 release. This release is now based in KDE Frameworks 5, you can check the full changelog at <a href='https://www.kde.org/announcements/fulllog_applications.php?version=16.12.0#okular'>https://www.kde.org/announcements/fulllog_applications.php?version=16.12.0#okular</a>. Okular 1.0 is a recommended update for everyone using Okular."
+msgid "The 1.1 version of Okular has been released together with KDE Applications 17.04 release. This release introduces annotation resize functionality, support for automatic calculation of form contents, touch screen improvements and more! You can check the full changelog at <a href='https://www.kde.org/announcements/fulllog_applications.php?version=17.04.0#okular'>https://www.kde.org/announcements/fulllog_applications.php?version=17.04.0#okular</a>. Okular 1.1 is a recommended update for everyone using Okular."
msgstr ""
#. +> trunk
#: news.rdf:36
#, kde-format
-msgid "Okular 0.26 released"
+msgid "Okular 1.0 released"
msgstr ""
#. +> trunk
#: news.rdf:37
#, kde-format
-msgid "August 18, 2016"
+msgid "December 15, 2016"
msgstr ""
#. +> trunk
#: news.rdf:38
#, kde-format
-msgid "The 0.26 version of Okular has been released together with KDE Applications 16.08 release. This release introduces very small changes, you can check the full changelog at <a href='https://www.kde.org/announcements/fulllog_applications.php?version=16.08.0#okular'>https://www.kde.org/announcements/fulllog_applications.php?version=16.08.0#okular</a>. Okular 0.26 is a recommended update for everyone using Okular."
+msgid "The 1.0 version of Okular has been released together with KDE Applications 16.12 release. This release is now based in KDE Frameworks 5, you can check the full changelog at <a href='https://www.kde.org/announcements/fulllog_applications.php?version=16.12.0#okular'>https://www.kde.org/announcements/fulllog_applications.php?version=16.12.0#okular</a>. Okular 1.0 is a recommended update for everyone using Okular."
msgstr ""
#. +> trunk
#: news.rdf:41
#, kde-format
-msgid "Okular 0.24 released"
+msgid "Okular 0.26 released"
msgstr ""
#. +> trunk
#: news.rdf:42
#, kde-format
-msgid "December 16, 2015"
+msgid "August 18, 2016"
msgstr ""
#. +> trunk
#: news.rdf:43
#, kde-format
-msgid "The 0.24 version of Okular has been released together with KDE Applications 15.12 release. This release introduces minor bugfixes and features, you can check the full changelog at <a href='https://www.kde.org/announcements/fulllog_applications-15.12.0.php#okular'>https://www.kde.org/announcements/fulllog_applications-15.12.0.php#okular</a>. Okular 0.24 is a recommended update for everyone using Okular."
+msgid "The 0.26 version of Okular has been released together with KDE Applications 16.08 release. This release introduces very small changes, you can check the full changelog at <a href='https://www.kde.org/announcements/fulllog_applications.php?version=16.08.0#okular'>https://www.kde.org/announcements/fulllog_applications.php?version=16.08.0#okular</a>. Okular 0.26 is a recommended update for everyone using Okular."
msgstr ""
#. +> trunk
#: news.rdf:46
#, kde-format
-msgid "Okular 0.23 released"
+msgid "Okular 0.24 released"
msgstr ""
#. +> trunk
#: news.rdf:47
#, kde-format
-msgid "August 19, 2015"
+msgid "December 16, 2015"
msgstr ""
#. +> trunk
#: news.rdf:48
#, kde-format
-msgid "The 0.23 version of Okular has been released together with KDE Applications 15.08 release. This release introduces support for the Fade transition in presentation mode as well as some fixes regarding annotations and video playback. Okular 0.23 is a recommended update for everyone using Okular."
+msgid "The 0.24 version of Okular has been released together with KDE Applications 15.12 release. This release introduces minor bugfixes and features, you can check the full changelog at <a href='https://www.kde.org/announcements/fulllog_applications-15.12.0.php#okular'>https://www.kde.org/announcements/fulllog_applications-15.12.0.php#okular</a>. Okular 0.24 is a recommended update for everyone using Okular."
msgstr ""
#. +> trunk
#: news.rdf:51
#, kde-format
-msgid "Okular 0.22 released"
+msgid "Okular 0.23 released"
msgstr ""
#. +> trunk
#: news.rdf:52
#, kde-format
-msgid "April 15, 2015"
+msgid "August 19, 2015"
msgstr ""
#. +> trunk
#: news.rdf:53
#, kde-format
-msgid "The 0.22 version of Okular has been released together with KDE Applications 15.04 release. Okular 0.22 is a recommended update for everyone using Okular."
+msgid "The 0.23 version of Okular has been released together with KDE Applications 15.08 release. This release introduces support for the Fade transition in presentation mode as well as some fixes regarding annotations and video playback. Okular 0.23 is a recommended update for everyone using Okular."
msgstr ""
#. +> trunk
#: news.rdf:56
#, kde-format
-msgid "Okular 0.21 released"
+msgid "Okular 0.22 released"
msgstr ""
#. +> trunk
#: news.rdf:57
#, kde-format
-msgid "December 17, 2014"
+msgid "April 15, 2015"
msgstr ""
#. +> trunk
#: news.rdf:58
#, kde-format
-msgid "The 0.21 version of Okular has been released together with KDE Applications 14.12 release. This release introduces new features like latex-synctex reverse searching in dvi and small bugfixes. Okular 0.21 is a recommended update for everyone using Okular."
+msgid "The 0.22 version of Okular has been released together with KDE Applications 15.04 release. Okular 0.22 is a recommended update for everyone using Okular."
msgstr ""
#. +> trunk
#: news.rdf:61
#, kde-format
-msgid "Okular 0.19 released"
+msgid "Okular 0.21 released"
msgstr ""
#. +> trunk
#: news.rdf:62
#, kde-format
-msgid "April 16, 2014"
+msgid "December 17, 2014"
msgstr ""
#. +> trunk
#: news.rdf:63
#, kde-format
-msgid "The 0.19 version of Okular has been released together with KDE Applications 4.13 release. This release introduces new features like tabs support in the interface, use of DPI screen so that page size matches real paper size, improvements to the Undo/Redo framework and other features/refinements. Okular 0.19 is a recommended update for everyone using Okular."
+msgid "The 0.21 version of Okular has been released together with KDE Applications 14.12 release. This release introduces new features like latex-synctex reverse searching in dvi and small bugfixes. Okular 0.21 is a recommended update for everyone using Okular."
msgstr ""
#. +> trunk
#: news.rdf:66
#, kde-format
-msgid "Okular 0.18 released"
+msgid "Okular 0.19 released"
msgstr ""
#. +> trunk
#: news.rdf:67
#, kde-format
-msgid "December 12, 2013"
+msgid "April 16, 2014"
msgstr ""
#. +> trunk
#: news.rdf:68
#, kde-format
-msgid "The 0.18 version of Okular has been released together with KDE Applications 4.12 release. This release introduces new features like audio/video support in EPub files and also improvements to existing features like searching and printing. Okular 0.18 is a recommended update for everyone using Okular."
+msgid "The 0.19 version of Okular has been released together with KDE Applications 4.13 release. This release introduces new features like tabs support in the interface, use of DPI screen so that page size matches real paper size, improvements to the Undo/Redo framework and other features/refinements. Okular 0.19 is a recommended update for everyone using Okular."
msgstr ""
#. +> trunk
#: news.rdf:71
#, kde-format
-msgid "Okular 0.17 released"
+msgid "Okular 0.18 released"
msgstr ""
#. +> trunk
#: news.rdf:72
#, kde-format
-msgid "August 16, 2013"
+msgid "December 12, 2013"
msgstr ""
#. +> trunk
#: news.rdf:73
#, kde-format
-msgid "The 0.17 version of Okular has been released together with KDE Applications 4.11 release. This release introduces new features like undo/redo support for forms and annotations and configurable review tools. Okular 0.17 is a recommended update for everyone using Okular."
+msgid "The 0.18 version of Okular has been released together with KDE Applications 4.12 release. This release introduces new features like audio/video support in EPub files and also improvements to existing features like searching and printing. Okular 0.18 is a recommended update for everyone using Okular."
msgstr ""
#. +> trunk
#: news.rdf:76
#, kde-format
-msgid "Okular 0.16 released"
+msgid "Okular 0.17 released"
msgstr ""
#. +> trunk
#: news.rdf:77
#, kde-format
-msgid "February 6, 2013"
+msgid "August 16, 2013"
msgstr ""
#. +> trunk
#: news.rdf:78
#, kde-format
-msgid "The 0.16 version of Okular has been released together with KDE Applications 4.10 release. This release introduces new features like the ability to zoom to higher levels in PDF documents, an Active based viewer for your tablet devices, more support for PDF movies, viewport follows selection, and annotation editing improvements. Okular 0.16 is a recommended update for everyone using Okular."
+msgid "The 0.17 version of Okular has been released together with KDE Applications 4.11 release. This release introduces new features like undo/redo support for forms and annotations and configurable review tools. Okular 0.17 is a recommended update for everyone using Okular."
msgstr ""
#. +> trunk
#: news.rdf:81
#, kde-format
-msgid "Okular forums"
+msgid "Okular 0.16 released"
msgstr ""
#. +> trunk
#: news.rdf:82
#, kde-format
-msgid "October 10, 2012"
+msgid "February 6, 2013"
msgstr ""
#. +> trunk
#: news.rdf:83
#, kde-format
-msgid "We now have a subforum inside the KDE Community Forums. You can find it at <a href=\"http://forum.kde.org/viewforum.php?f=251\">http://forum.kde.org/viewforum.php?f=251</href>."
+msgid "The 0.16 version of Okular has been released together with KDE Applications 4.10 release. This release introduces new features like the ability to zoom to higher levels in PDF documents, an Active based viewer for your tablet devices, more support for PDF movies, viewport follows selection, and annotation editing improvements. Okular 0.16 is a recommended update for everyone using Okular."
msgstr ""
#. +> trunk
#: news.rdf:86
#, kde-format
-msgid "Okular 0.15 released"
+msgid "Okular forums"
msgstr ""
#. +> trunk
#: news.rdf:87
#, kde-format
-msgid "August 1, 2012"
+msgid "October 10, 2012"
msgstr ""
#. +> trunk
#: news.rdf:88
#, kde-format
-msgid "The 0.15 version of Okular has been released together with KDE Applications 4.9 release. This release introduces new features like the ability to store annotations with PDF documents, more support for PDF movies, multiple bookmarks per page and some other minor improvements. You can find a non complete list of bugs and features in <a href=\"https://bugs.kde.org/buglist.cgi?query_format=advanced&short_desc_type=allwordssubstr&short_desc=&product=okular&long_desc_type=allwordssubstr&long_desc=&bug_file_loc_type=allwordssubstr&bug_file_loc=&keywords_type=allwords&keywords=&bug_status=RESOLVED&bug_status=VERIFIED&bug_status=CLOSED&emailtype1=exact&email1=&emailtype2=substring&email2=&bugidtype=include&bug_id=&votes=&chfieldfrom=2010-10-10&chfieldto=Now&chfield=cf_versionfixedin&chfieldvalue=4.9.0&cmdtype=doit&order=Reuse+same+sort+as+last+time&field0-0-0=noop&type0-0-0=noop&value0-0-0=\">bugzilla</a>. Okular 0.15 is a recommended update for everyone using Okular."
+msgid "We now have a subforum inside the KDE Community Forums. You can find it at <a href=\"http://forum.kde.org/viewforum.php?f=251\">http://forum.kde.org/viewforum.php?f=251</href>."
msgstr ""
#. +> trunk
#: news.rdf:91
#, kde-format
-msgid "Okular 0.14 released"
+msgid "Okular 0.15 released"
msgstr ""
#. +> trunk
#: news.rdf:92
#, kde-format
-msgid "January 25, 2012"
+msgid "August 1, 2012"
msgstr ""
#. +> trunk
#: news.rdf:93
#, kde-format
-msgid "The 0.14 version of Okular has been released together with KDE Applications 4.8 release. This release introduces new features like improved text selection in documents with columns, table selection tool, LaTex rendering in annotations, improved embedded support (for use in e.g. Kile), better layouting for faced pages, smarter screensaver/powermanagement handling, improved page label support, default zoom configuration, improved Landscape printing, etc. You can find a non complete list of bugs and features in <a href=\"https://bugs.kde.org/buglist.cgi?query_format=advanced&short_desc_type=allwordssubstr&short_desc=&product=okular&long_desc_type=allwordssubstr&long_desc=&bug_file_loc_type=allwordssubstr&bug_file_loc=&keywords_type=allwords&keywords=&bug_status=RESOLVED&bug_status=VERIFIED&bug_status=CLOSED&emailtype1=exact&email1=&emailtype2=substring&email2=&bugidtype=include&bug_id=&votes=&chfieldfrom=2010-10-10&chfieldto=Now&chfield=cf_versionfixedin&chfieldvalue=4.8.0&cmdtype=doit&order=Reuse+same+sort+as+last+time&field0-0-0=noop&type0-0-0=noop&value0-0-0=\">bugzilla</a>. Okular 0.14 is a recommended update for everyone using Okular."
+msgid "The 0.15 version of Okular has been released together with KDE Applications 4.9 release. This release introduces new features like the ability to store annotations with PDF documents, more support for PDF movies, multiple bookmarks per page and some other minor improvements. You can find a non complete list of bugs and features in <a href=\"https://bugs.kde.org/buglist.cgi?query_format=advanced&short_desc_type=allwordssubstr&short_desc=&product=okular&long_desc_type=allwordssubstr&long_desc=&bug_file_loc_type=allwordssubstr&bug_file_loc=&keywords_type=allwords&keywords=&bug_status=RESOLVED&bug_status=VERIFIED&bug_status=CLOSED&emailtype1=exact&email1=&emailtype2=substring&email2=&bugidtype=include&bug_id=&votes=&chfieldfrom=2010-10-10&chfieldto=Now&chfield=cf_versionfixedin&chfieldvalue=4.9.0&cmdtype=doit&order=Reuse+same+sort+as+last+time&field0-0-0=noop&type0-0-0=noop&value0-0-0=\">bugzilla</a>. Okular 0.15 is a recommended update for everyone using Okular."
msgstr ""
#. +> trunk
#: news.rdf:96
#, kde-format
-msgid "Okular 0.13 released"
+msgid "Okular 0.14 released"
msgstr ""
#. +> trunk
#: news.rdf:97
#, kde-format
-msgid "July 27, 2011"
+msgid "January 25, 2012"
msgstr ""
#. +> trunk
#: news.rdf:98
#, kde-format
-msgid "The 0.13 version of Okular has been released together with KDE Applications 4.7 release. This release introduce small fixes and features and is a recommended update for everyone using Okular."
+msgid "The 0.14 version of Okular has been released together with KDE Applications 4.8 release. This release introduces new features like improved text selection in documents with columns, table selection tool, LaTex rendering in annotations, improved embedded support (for use in e.g. Kile), better layouting for faced pages, smarter screensaver/powermanagement handling, improved page label support, default zoom configuration, improved Landscape printing, etc. You can find a non complete list of bugs and features in <a href=\"https://bugs.kde.org/buglist.cgi?query_format=advanced&short_desc_type=allwordssubstr&short_desc=&product=okular&long_desc_type=allwordssubstr&long_desc=&bug_file_loc_type=allwordssubstr&bug_file_loc=&keywords_type=allwords&keywords=&bug_status=RESOLVED&bug_status=VERIFIED&bug_status=CLOSED&emailtype1=exact&email1=&emailtype2=substring&email2=&bugidtype=include&bug_id=&votes=&chfieldfrom=2010-10-10&chfieldto=Now&chfield=cf_versionfixedin&chfieldvalue=4.8.0&cmdtype=doit&order=Reuse+same+sort+as+last+time&field0-0-0=noop&type0-0-0=noop&value0-0-0=\">bugzilla</a>. Okular 0.14 is a recommended update for everyone using Okular."
msgstr ""
#. +> trunk
#: news.rdf:101
#, kde-format
-msgid "Okular 0.12 released"
+msgid "Okular 0.13 released"
msgstr ""
#. +> trunk
#: news.rdf:102
#, kde-format
-msgid "January 26, 2011"
+msgid "July 27, 2011"
msgstr ""
#. +> trunk
#: news.rdf:103
#, kde-format
-msgid "The 0.12 version of Okular has been released together with KDE Applications 4.6 release. This release introduce small fixes and features and is a recommended update for everyone using Okular."
+msgid "The 0.13 version of Okular has been released together with KDE Applications 4.7 release. This release introduce small fixes and features and is a recommended update for everyone using Okular."
msgstr ""
#. +> trunk
#: news.rdf:106
#, kde-format
-msgid "Okular 0.11 released"
+msgid "Okular 0.12 released"
msgstr ""
#. +> trunk
#: news.rdf:107
#, kde-format
-msgid "August 10, 2010"
+msgid "January 26, 2011"
msgstr ""
#. +> trunk
#: news.rdf:108
#, kde-format
-msgid "The 0.11 version of Okular has been released together with KDE Applications 4.5 release. This release introduce small fixes and features and is a recommended update for everyone using Okular."
+msgid "The 0.12 version of Okular has been released together with KDE Applications 4.6 release. This release introduce small fixes and features and is a recommended update for everyone using Okular."
msgstr ""
#. +> trunk
#: news.rdf:111
#, kde-format
-msgid "Okular 0.10 released"
+msgid "Okular 0.11 released"
msgstr ""
#. +> trunk
#: news.rdf:112
#, kde-format
-msgid "February 9, 2010"
+msgid "August 10, 2010"
msgstr ""
#. +> trunk
#: news.rdf:113
#, kde-format
-msgid "The 0.10 version of Okular has been released together with KDE SC 4.4. Besides general improvements in stability this release sports new/improved support for both inverse search and forward search linking latex source code lines with the corresponding locations in dvi and pdf files."
+msgid "The 0.11 version of Okular has been released together with KDE Applications 4.5 release. This release introduce small fixes and features and is a recommended update for everyone using Okular."
msgstr ""
#. +> trunk
#: news.rdf:116
#, kde-format
-msgid "Okular 0.9.4 released"
+msgid "Okular 0.10 released"
msgstr ""
#. +> trunk
#: news.rdf:117
#, kde-format
-msgid "December 1, 2009"
+msgid "February 9, 2010"
msgstr ""
#. +> trunk
#: news.rdf:118
#, kde-format
-msgid "The forth maintenance release of the KDE 4.3 series includes Okular 0.9.4. It includes some crash fixes, and few small bug fixes in the interface. You can read all the fixed issues at <a href=\"http://www.kde.org/announcements/changelogs/changelog4_3_3to4_3_4.php#okular\">http://www.kde.org/announcements/changelogs/changelog4_3_3to4_3_4.php</a>"
+msgid "The 0.10 version of Okular has been released together with KDE SC 4.4. Besides general improvements in stability this release sports new/improved support for both inverse search and forward search linking latex source code lines with the corresponding locations in dvi and pdf files."
msgstr ""
#. +> trunk
#: news.rdf:121
#, kde-format
-msgid "Okular 0.8.4 released"
+msgid "Okular 0.9.4 released"
msgstr ""
#. +> trunk
#: news.rdf:122
#, kde-format
-msgid "June 3, 2009"
+msgid "December 1, 2009"
msgstr ""
#. +> trunk
#: news.rdf:123
#, kde-format
-msgid "The forth maintenance release of the KDE 4.2 series includes Okular 0.8.4. It includes some fixes in OpenDocument Text documents, a couple of crash fixes, and few small bugs in the interface. You can read all the fixed issues at <a href=\"http://www.kde.org/announcements/changelogs/changelog4_2_3to4_2_4.php#okular\">http://www.kde.org/announcements/changelogs/changelog4_2_3to4_2_4.php</a>"
+msgid "The forth maintenance release of the KDE 4.3 series includes Okular 0.9.4. It includes some crash fixes, and few small bug fixes in the interface. You can read all the fixed issues at <a href=\"http://www.kde.org/announcements/changelogs/changelog4_3_3to4_3_4.php#okular\">http://www.kde.org/announcements/changelogs/changelog4_3_3to4_3_4.php</a>"
msgstr ""
#. +> trunk
#: news.rdf:126
#, kde-format
-msgid "Okular 0.8.3 released"
+msgid "Okular 0.8.4 released"
msgstr ""
#. +> trunk
#: news.rdf:127
#, kde-format
-msgid "May 6, 2009"
+msgid "June 3, 2009"
msgstr ""
#. +> trunk
#: news.rdf:128
#, kde-format
-msgid "The third maintenance release of the KDE 4.2 series includes Okular 0.8.3. It does not provide much news for Okular, the only relevant change is about thread more safety when generating page images of XPS document. You can read all the fixed issues at <a href=\"http://www.kde.org/announcements/changelogs/changelog4_2_2to4_2_3.php#okular\">http://www.kde.org/announcements/changelogs/changelog4_2_2to4_2_3.php</a>"
+msgid "The forth maintenance release of the KDE 4.2 series includes Okular 0.8.4. It includes some fixes in OpenDocument Text documents, a couple of crash fixes, and few small bugs in the interface. You can read all the fixed issues at <a href=\"http://www.kde.org/announcements/changelogs/changelog4_2_3to4_2_4.php#okular\">http://www.kde.org/announcements/changelogs/changelog4_2_3to4_2_4.php</a>"
msgstr ""
#. +> trunk
#: news.rdf:131
#, kde-format
-msgid "Okular 0.8.2 released"
+msgid "Okular 0.8.3 released"
msgstr ""
#. +> trunk
#: news.rdf:132
#, kde-format
-msgid "April 2, 2009"
+msgid "May 6, 2009"
msgstr ""
#. +> trunk
#: news.rdf:133
#, kde-format
-msgid "The second maintenance release of the KDE 4.2 series includes Okular 0.8.2. It includes better support (hopefully working) for DVI and pdfsync inverse search, and fixes and small improvements in the presentation mode. You can read all the fixed issues at <a href=\"http://www.kde.org/announcements/changelogs/changelog4_2_1to4_2_2.php#okular\">http://www.kde.org/announcements/changelogs/changelog4_2_1to4_2_2.php</a>"
+msgid "The third maintenance release of the KDE 4.2 series includes Okular 0.8.3. It does not provide much news for Okular, the only relevant change is about thread more safety when generating page images of XPS document. You can read all the fixed issues at <a href=\"http://www.kde.org/announcements/changelogs/changelog4_2_2to4_2_3.php#okular\">http://www.kde.org/announcements/changelogs/changelog4_2_2to4_2_3.php</a>"
msgstr ""
#. +> trunk
#: news.rdf:136
#, kde-format
-msgid "Okular 0.8.1 released"
+msgid "Okular 0.8.2 released"
msgstr ""
#. +> trunk
#: news.rdf:137
#, kde-format
-msgid "March 4, 2009"
+msgid "April 2, 2009"
msgstr ""
#. +> trunk
#: news.rdf:138
#, kde-format
-msgid "The first maintenance release of the KDE 4.2 series includes Okular 0.8.1. It includes some crash fixes in the CHM and DjVu backends, and minor fixes in the user interface. You can read all the fixed issues at <a href=\"http://www.kde.org/announcements/changelogs/changelog4_2to4_2_1.php#okular\">http://www.kde.org/announcements/changelogs/changelog4_2to4_2_1.php</a>"
+msgid "The second maintenance release of the KDE 4.2 series includes Okular 0.8.2. It includes better support (hopefully working) for DVI and pdfsync inverse search, and fixes and small improvements in the presentation mode. You can read all the fixed issues at <a href=\"http://www.kde.org/announcements/changelogs/changelog4_2_1to4_2_2.php#okular\">http://www.kde.org/announcements/changelogs/changelog4_2_1to4_2_2.php</a>"
msgstr ""
#. +> trunk
#: news.rdf:141
#, kde-format
-msgid "Okular 0.8 released"
+msgid "Okular 0.8.1 released"
msgstr ""
#. +> trunk
#: news.rdf:142
#, kde-format
-msgid "January 27, 2009"
+msgid "March 4, 2009"
msgstr ""
#. +> trunk
#: news.rdf:143
#, kde-format
+msgid "The first maintenance release of the KDE 4.2 series includes Okular 0.8.1. It includes some crash fixes in the CHM and DjVu backends, and minor fixes in the user interface. You can read all the fixed issues at <a href=\"http://www.kde.org/announcements/changelogs/changelog4_2to4_2_1.php#okular\">http://www.kde.org/announcements/changelogs/changelog4_2to4_2_1.php</a>"
+msgstr ""
+
+#. +> trunk
+#: news.rdf:146
+#, kde-format
+msgid "Okular 0.8 released"
+msgstr ""
+
+#. +> trunk
+#: news.rdf:147
+#, kde-format
+msgid "January 27, 2009"
+msgstr ""
+
+#. +> trunk
+#: news.rdf:148
+#, kde-format
msgid ""
"The Okular team is proud to announce a new version of Okular, released as part of <a href=\"http://www.kde.org/announcements/4.2/\">KDE 4.2</a>. Some of the new features and improvements include (in random order): "
"<ul type=\"disc\"> "
"<li>Add a Document Archiving possibility</li>"
" "
"<li>Start a search from the current page</li>"
" "
"<li>Preliminar support for videos in PDF documents</li>"
" "
"<li>Presentation mode improvements: screen saver inhibition, and black screen mode</li>"
" "
"<li>More stamp annotations</li>"
" "
"<li>Support for Lilypond's \"point-and-click\" links</li>"
" "
"<li>Editor configuration for inverse search</li>"
" "
"<li>Export to OpenDocument Text and HTML for ODT, Fictionbook and EPub backends (requires Qt 4.5)</li>"
"<li>OpenDocument Text backend: various improvements</li>"
" "
"<li>... other small features and fixes</li>"
" </ul>"
" And, of course, many bugs were fixed."
msgstr ""
#. +> trunk
-#: news.rdf:146
+#: news.rdf:151
#, kde-format
msgid "Okular 0.7.3 released"
msgstr ""
#. +> trunk
-#: news.rdf:147
+#: news.rdf:152
#, kde-format
msgid "November 4, 2008"
msgstr ""
#. +> trunk
-#: news.rdf:148
+#: news.rdf:153
#, kde-format
msgid "The third maintenance release of the KDE 4.1 series includes Okular 0.7.3. It includes some minor fixes in the user interface and in the text search. You can read all the fixed issues at <a href=\"http://www.kde.org/announcements/changelogs/changelog4_1_2to4_1_3.php#okular\">http://www.kde.org/announcements/changelogs/changelog4_1_2to4_1_3.php</a>"
msgstr ""
#. +> trunk
-#: news.rdf:151
+#: news.rdf:156
#, kde-format
msgid "Okular 0.7.2 released"
msgstr ""
#. +> trunk
-#: news.rdf:152
+#: news.rdf:157
#, kde-format
msgid "October 3, 2008"
msgstr ""
#. +> trunk
-#: news.rdf:153
+#: news.rdf:158
#, kde-format
msgid "The second maintenance release of the KDE 4.1 series includes Okular 0.7.2. It includes some minor fixes in the TIFF and Comicbook backends and the change to \"Fit Width\" as default zoom level. You can read all the fixed issues at <a href=\"http://www.kde.org/announcements/changelogs/changelog4_1_1to4_1_2.php#okular\">http://www.kde.org/announcements/changelogs/changelog4_1_1to4_1_2.php</a>"
msgstr ""
#. +> trunk
-#: news.rdf:156
+#: news.rdf:161
#, kde-format
msgid "Okular 0.7.1 released"
msgstr ""
#. +> trunk
-#: news.rdf:157
+#: news.rdf:162
#, kde-format
msgid "September 3, 2008"
msgstr ""
#. +> trunk
-#: news.rdf:158
+#: news.rdf:163
#, kde-format
msgid "The first maintenance release of the KDE 4.1 series includes Okular 0.7.1. It includes some crash fixes among other minor fixes. You can read all the fixed issues at <a href=\"http://www.kde.org/announcements/changelogs/changelog4_1to4_1_1.php#okular\">http://www.kde.org/announcements/changelogs/changelog4_1to4_1_1.php</a>"
msgstr ""
#. +> trunk
-#: news.rdf:161
+#: news.rdf:166
#, kde-format
msgid "Okular 0.7 released"
msgstr ""
#. +> trunk
-#: news.rdf:162
+#: news.rdf:167
#, kde-format
msgid "July 29, 2008"
msgstr ""
#. +> trunk
-#: news.rdf:180
+#: news.rdf:185
#, kde-format
msgid ""
"<![CDATA[The Okular team is proud to announce a new version of Okular, released as part of <a href=\"http://www.kde.org/announcements/4.1/\">KDE 4.1</a>. Some of the new features and improvements include (in random order):\n"
"<ul type=\"disc\">\n"
"\t"
"<li>Possibility to save a PDF document with the changes to the form fields</li>"
"\n"
"\t"
"<li>Presentation mode: support for more than one screen, and possibility to disable transitions</li>"
"\n"
"\t"
"<li>The zoom level is stored per-document now</li>"
"\n"
"\t"
"<li>Enhanced text-to-speech support, that can be used to read the whole document, a specific page or the text selection</li>"
"\n"
"\t"
"<li>Backward direction for text search</li>"
"\n"
"\t"
"<li>Improved support for forms</li>"
"\n"
"\t"
"<li>Preliminary (really basic and most probably incomplete) support for JavaScript in PDF documents</li>"
"\n"
"\t"
"<li>Support for file attachment annotations</li>"
"\n"
"\t"
"<li>Possibility to remove the white border of pages when viewing pages</li>"
"\n"
"\t"
"<li>New backend for EPub documents</li>"
"\n"
"\t"
"<li>OpenDocument Text backend: support for encrypted documents, list and tables improvements</li>"
"\n"
"\t"
"<li>XPS backend: various loading and rendering improvements, should be much more usable now</li>"
"\n"
"\t"
"<li>PS backend: various improvements, mainly due to the newer libspectre required</li>"
"\n"
"\t"
"<li>... other small features</li>"
"\n"
"</ul>"
"\n"
"And, of course, many bugs were fixed.]]>"
msgstr ""
#. +> trunk
-#: news.rdf:183
+#: news.rdf:188
#, kde-format
msgid "Okular 0.6.3 released"
msgstr ""
#. +> trunk
-#: news.rdf:184
+#: news.rdf:189
#, kde-format
msgid "April 2, 2008"
msgstr ""
#. +> trunk
-#: news.rdf:185
+#: news.rdf:190
#, kde-format
msgid "The third maintenance release of the KDE 4.0 series includes Okular 0.6.3. It includes few bug fixes, i.e. a better way to get the text position in a PDF document, and a couple of fixes for the annotation system, and the table of contents. You can read all the fixed issues at <a href=\"http://www.kde.org/announcements/changelogs/changelog4_0_2to4_0_3.php#okular\">http://www.kde.org/announcements/changelogs/changelog4_0_2to4_0_3.php</a>"
msgstr ""
#. +> trunk
-#: news.rdf:188
+#: news.rdf:193
#, kde-format
msgid "Okular 0.6.2 released"
msgstr ""
#. +> trunk
-#: news.rdf:189
+#: news.rdf:194
#, kde-format
msgid "March 5, 2008"
msgstr ""
#. +> trunk
-#: news.rdf:190
+#: news.rdf:195
#, kde-format
msgid "The second maintenance release of the KDE 4.0 series includes Okular 0.6.2. It includes quite a few bug fixes, including more stability when closing a document, and small fixes for the bookmark system. You can read all the fixed issues at <a href=\"http://www.kde.org/announcements/changelogs/changelog4_0_1to4_0_2.php#okular\">http://www.kde.org/announcements/changelogs/changelog4_0_1to4_0_2.php</a>"
msgstr ""
#. +> trunk
-#: news.rdf:193
+#: news.rdf:198
#, kde-format
msgid "Okular 0.6.1 released"
msgstr ""
#. +> trunk
-#: news.rdf:194
+#: news.rdf:199
#, kde-format
msgid "February 5, 2008"
msgstr ""
#. +> trunk
-#: news.rdf:195
+#: news.rdf:200
#, kde-format
msgid "The first maintenance release of the KDE 4.0 series includes Okular 0.6.1. It includes quite a few bug fixes, including better not redownloading files when saving, usability improvements, etc. You can read all the fixed issues at <a href=\"http://www.kde.org/announcements/changelogs/changelog4_0to4_0_1.php#okular\">http://www.kde.org/announcements/changelogs/changelog4_0to4_0_1.php</a>"
msgstr ""
#. +> trunk
-#: news.rdf:198
+#: news.rdf:203
#, kde-format
msgid "aKademy 2007 Okular presentation material online"
msgstr ""
#. +> trunk
-#: news.rdf:199
+#: news.rdf:204
#, kde-format
msgid "Jul 10, 2007"
msgstr ""
#. +> trunk
-#: news.rdf:202
+#: news.rdf:207
#, kde-format
msgid ""
"\n"
"\t\t\t\tThe Okular talk given by Pino Toscano at <a href=\"http://akademy2007.kde.org\">aKademy 2007</a> is now online. There are both <a href=\"http://akademy2007.kde.org/conference/slides/okular.pdf\">slides</a> and <a href=\"http://home.kde.org/~akademy07/videos/2-05-Okular:simply_a_document_viewer.ogg\">video</a> available.\n"
"\t\t\t"
msgstr ""
#. +> trunk
-#: news.rdf:205
+#: news.rdf:210
#, kde-format
msgid "Okular in kdegraphics"
msgstr ""
#. +> trunk
-#: news.rdf:206
+#: news.rdf:211
#, kde-format
msgid "Apr 4, 2007"
msgstr ""
#. +> trunk
-#: news.rdf:209
+#: news.rdf:214
#, kde-format
msgid ""
"\n"
"\t\t\t\tThe Okular team is proud to announce Okular is now part of the kdegraphics module. The next version of Okular will be shipped with KDE 4.0.\n"
"\t\t\t"
msgstr ""
#. +> trunk
-#: news.rdf:212
+#: news.rdf:217
#, kde-format
msgid "Okular joins The Season of Usability project"
msgstr ""
#. +> trunk
-#: news.rdf:213
+#: news.rdf:218
#, kde-format
msgid "Jan 31, 2007"
msgstr ""
#. +> trunk
-#: news.rdf:216
+#: news.rdf:221
#, kde-format
msgid ""
"\n"
"\t\t\t\tThe Okular team is proud to announce Okular has been one of the applications selected to participate in the <a href=\"http://www.openusability.org/season/0607/\">Season of Usability</a> project, run by usability experts at <a href=\"http://www.openusability.org\">OpenUsability</a>. From here we want to welcome Sharad Baliyan to the team and thank Florian Graessle and Pino Toscano for their continued work on improving Okular.\n"
"\t\t\t"
msgstr ""
#. +> trunk
-#: news.rdf:219
+#: news.rdf:224
#, kde-format
msgid "Okular 0.5.81 unstable snapshot released"
msgstr ""
#. +> trunk
-#: news.rdf:220
+#: news.rdf:225
#, kde-format
msgid "Nov 2, 2006"
msgstr ""
#. +> trunk
-#: news.rdf:223
+#: news.rdf:228
#, kde-format
msgid ""
"\n"
"\t\t\t\tThe Okular team is proud to announce the release of a snapshot of Okular that compiles against the <a href=\"http://dot.kde.org/1162475911/\">Second KDE 4 Developers Snapshot</a>. This snapshot is not completely functional, yet, as we have lots of things to polish and finish, but you are free to test it and provide as much feedback as you want. You can find the snapshot package at <a href=\"ftp://ftp.kde.org/pub/kde/unstable/apps/KDE4.x/graphics/okular-0.5.81.tar.bz2\">ftp://ftp.kde.org/pub/kde/unstable/apps/KDE4.x/graphics/okular-0.5.81.tar.bz2</a>. Have a look at the <a href=\"download.php\">download</a> page to be sure you have all the necessary libraries.\n"
"\t\t\t"
msgstr ""
#. +> trunk
-#: news.rdf:226
+#: news.rdf:231
#, kde-format
msgid "Okular 0.5 unstable snapshot released"
msgstr ""
#. +> trunk
-#: news.rdf:227
+#: news.rdf:232
#, kde-format
msgid "Aug 27, 2006"
msgstr ""
#. +> trunk
-#: news.rdf:230
+#: news.rdf:235
#, kde-format
msgid ""
"\n"
"\t\t\t\tThe Okular team is proud to announce the release of a snapshot of Okular that compiles against the <a href=\"http://dot.kde.org/1155935483/\">KDE 4 'Krash' snapshot</a>. This snapshot is still not completely functional as we have lots of things to polish and finish but you are free to test it and provide as much feedback as you want. You can find the snapshot package at <a href=\"ftp://ftp.kde.org/pub/kde/unstable/apps/KDE4.x/graphics/okular-0.5.tar.bz2\">ftp://ftp.kde.org/pub/kde/unstable/apps/KDE4.x/graphics/okular-0.5.tar.bz2</a>. Have a look at the <a href=\"download.php\">download</a> page to be sure you have all the necessary libraries.\n"
"\t\t\t"
msgstr ""
#. +> trunk
#: screenshots.php:9
msgid "Some images of Okular "in action"..."
msgstr ""
#. +> trunk
#: screenshots.php:11
msgid "Backends in action"
msgstr ""
#. +> trunk
#: screenshots.php:12
msgid "Here you can see some of the Okular backends in action on files."
msgstr ""
#. +> trunk
#: screenshots.php:17
msgid "PDF backend"
msgstr ""
#. +> trunk
#: screenshots.php:21
msgid "PostScript backend"
msgstr ""
#. +> trunk
#: screenshots.php:25
msgid "DjVu backend"
msgstr ""
#. +> trunk
#: screenshots.php:29
msgid "TIFF/fax backend"
msgstr ""
#. +> trunk
#: screenshots.php:35
msgid "Extraction of embedded files"
msgstr ""
#. +> trunk
#: screenshots.php:39
msgid "Word processor-like text selection"
msgstr ""
#. +> trunk
#: screenshots.php:43
msgid "Review mode"
msgstr ""
#. +> trunk
#: screenshots.php:47
msgid "Annotations (enter in Tools -> Review)"
msgstr ""
#. +> trunk
#: site.inc:4
msgid "Okular - more than a reader"
msgstr ""
#. +> trunk
#: site.inc:7
msgid "the Okular developers"
msgstr ""
#. +> trunk
#: team.php:10
msgid "Current Okular Team"
msgstr ""
#. +> trunk
#: team.php:13
msgid "The current Okular team is formed by:"
msgstr ""
#. +> trunk
#: team.php:16
msgid "(Current maintainer)"
msgstr ""
#. +> trunk
#: team.php:21
msgid "Your name here..."
msgstr ""
#. +> trunk
#: team.php:21
msgid "Join Okular development!"
msgstr ""
#. +> trunk
#: team.php:24
msgid "Former Okular developers"
msgstr ""
#. +> trunk
#: team.php:27
msgid "We'd like to thank all the people that worked on Okular in the past:"
msgstr ""
#. +> trunk
#: team.php:31
msgid "(Original Okular creator)"
msgstr ""
#. +> trunk
#: team.php:32
msgid "(Usability expert)"
msgstr ""
#. +> trunk
#: team.php:35
msgid "KPDF Developers"
msgstr ""
#. +> trunk
#: team.php:38
msgid "We'd like also to thank all the people who worked on <a href='http://kpdf.kde.org'>KPDF</a>:"
msgstr ""
#. +> trunk
#: team.php:41
msgid "Lots of features"
msgstr ""
#. +> trunk
#: team.php:42
msgid "Fontconfig support, type-ahead find, some patches"