"Language-Team: LANGUAGE <kde-i18n-doc@kde.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
#. Tag: title
#. +> trunk5
#: using-setup-metadata.docbook:2
#, no-c-format
msgid "Metadata Settings"
msgstr ""
#. Tag: sect2
#. +> trunk5
#: using-setup-metadata.docbook:2
#, no-c-format
msgid "&doc-using-setup-metadata-intro;"
msgstr ""
#. Tag: title
#. +> trunk5
#: using-setup-metadata.docbook:7
#, no-c-format
msgid "Behavior Settings"
msgstr ""
#. Tag: para
#. +> trunk5
#: using-setup-metadata.docbook:9
#, no-c-format
msgid "The <guilabel>Behavior</guilabel> tab allows you to select what information &digikam; will write to the metadata and control how &digikam; will deal with this embedded information."
msgstr ""
#. Tag: para
#. +> trunk5
#: using-setup-metadata.docbook:19
#, no-c-format
msgid "If the lazy synchronization is turned on &digikam; will only write metadata when user clicks on the <guilabel>Apply pending changes to metadata</guilabel> icon in the status bar or on exit."
msgstr ""
#. Tag: title
#. +> trunk5
#: using-setup-metadata.docbook:31
#, no-c-format
msgid "Sidecars Settings"
msgstr ""
#. Tag: para
#. +> trunk5
#: using-setup-metadata.docbook:33
#, no-c-format
msgid "The <guilabel>Sidecars</guilabel> tab allows user to control whether &digikam; will read/write from/to XMP sidecars or not. Filename for the sidecars set to <filename><replaceable>filename</replaceable>.<replaceable>ext</replaceable>.xmp</filename>. For example, <filename>image1.dng</filename> will have a sidecar file named <filename>image1.dng.xmp</filename>."
msgstr ""
#. Tag: para
#. +> trunk5
#: using-setup-metadata.docbook:36
#, no-c-format
-msgid "Please Note: If the box \"Read sidecar files\" is checked &digikam; will only read the sidecar while ignoring the embedded metadata."
+msgid "Please Note: If the box \"Read from sidecar files\" is checked &digikam; will only read the sidecar while ignoring the embedded metadata."
msgstr ""
#. Tag: title
#. +> trunk5
#: using-setup-metadata.docbook:56
#, no-c-format
msgid "Rotation Settings"
msgstr ""
#. Tag: sect3
#. +> trunk5
#: using-setup-metadata.docbook:61
#, no-c-format
msgid "&doc-using-setup-metadata-rotation-ac;"
msgstr ""
#. Tag: title
#. +> trunk5
#: using-setup-metadata.docbook:85
#, no-c-format
msgid "Views Settings"
msgstr ""
#. Tag: para
#. +> trunk5
#: using-setup-metadata.docbook:87
#, no-c-format
msgid "TODO"
msgstr ""
#. Tag: title
#. +> trunk5
#: using-setup-metadata.docbook:93
#, no-c-format
msgid "Advanced Settings"
msgstr ""
#. Tag: para
#. +> trunk5
#: using-setup-metadata.docbook:95
#, no-c-format
msgid "The <guilabel>Advanced</guilabel> tab allows you to manage namespaces used by &digikam; to store and retrieve tags, ratings and comments. This functionality is often used by advanced users to synchronize metadata between different software. Please leave the default settings if you are not sure what to do here."
"<p>Konsole does not have permission to save this profile to:<br />"
" \"%1\"</p>"
"<p>To be able to save settings you can either change the permissions of the profile configuration file or change the profile name to save the settings to a new profile.</p>"
msgstr ""
#. +> trunk5 stable5
#: EditProfileDialog.cpp:207
#, kde-format
msgid "<p>Each profile must have a name before it can be saved into disk.</p>"
msgstr ""
#. +> trunk5 stable5
#: EditProfileDialog.cpp:215
#, kde-format
msgid "<p>A profile with this name already exists.</p>"
msgid "Key bindings control how combinations of keystrokes in the terminal window are converted into the stream of characters that is then sent to the current terminal program. For more information on how to customize the key bindings check the Konsole Handbook."
msgid "Key bindings control how combinations of keystrokes in the terminal window are converted into the stream of characters which are sent to the current terminal program."
msgid "Any adjustments are only temporary to this session."
msgstr ""
#. +> trunk5 stable5
#: HistorySizeWidget.cpp:47
#, kde-format
msgctxt "@info:status"
msgid "When using this option, the scrollback data will be saved to RAM. If you choose a huge value, your system may run out of free RAM and cause serious issues with your system."
msgstr ""
#. +> trunk5 stable5
#: HistorySizeWidget.cpp:56
#, kde-format
msgctxt "@info:status"
msgid ""
"When using this option, the scrollback data will be written unencrypted to temporary files. Those temporary files will be deleted automatically when Konsole is closed in a normal manner.\n"
"Use Settings->Configure Konsole->File Location to select the location of the temporary files."
msgid "Tab title format used when a remote command (e.g. connection to another computer via SSH) is being executed"
msgstr ""
#. +> trunk5 stable5
#: schemas.cpp:1
#, kde-format
msgid "Black on Light Yellow"
msgstr ""
#. +> trunk5 stable5
#: schemas.cpp:2
#, kde-format
msgid "Black on Random Light"
msgstr ""
#. +> trunk5 stable5
#: schemas.cpp:3
#, kde-format
msgid "Black on White"
msgstr ""
#. +> trunk5 stable5
#: schemas.cpp:4
#, kde-format
msgid "Blue on Black"
msgstr ""
#. +> trunk5 stable5
#: schemas.cpp:5
#, kde-format
msgid "Breeze"
msgstr ""
#. +> trunk5 stable5
#: schemas.cpp:6
#, kde-format
msgid "Dark Pastels"
msgstr ""
#. +> trunk5 stable5
#: schemas.cpp:7
#, kde-format
msgid "Green on Black"
msgstr ""
#. +> trunk5 stable5
#: schemas.cpp:8
#, kde-format
msgid "Linux Colors"
msgstr ""
#. +> trunk5 stable5
#: schemas.cpp:9
#, kde-format
msgid "Red on Black"
msgstr ""
#. +> trunk5 stable5
#: schemas.cpp:10
#, kde-format
msgid "Solarized"
msgstr ""
#. +> trunk5 stable5
#: schemas.cpp:11
#, kde-format
msgid "Solarized Light"
msgstr ""
#. +> trunk5 stable5
#: schemas.cpp:12
#, kde-format
msgid "White on Black"
msgstr ""
#. +> trunk5 stable5
#: schemas.cpp:13
#, kde-format
msgid "Default (XFree 4)"
msgstr ""
#. +> trunk5 stable5
#: schemas.cpp:14
#, kde-format
msgid "Linux console"
msgstr ""
#. +> trunk5 stable5
#: schemas.cpp:15
#, kde-format
msgid "Solaris console"
msgstr ""
#. +> trunk5 stable5
#: Session.cpp:385
#, kde-format
msgid "Could not find binary: "
msgstr ""
#. +> trunk5 stable5
#: Session.cpp:394
#, kde-format
msgctxt "@info:shell Alert the user with red color text"
msgid "Warning: "
msgstr ""
#. +> trunk5 stable5
#: Session.cpp:452
#, kde-format
msgid "Could not find '%1', starting '%2' instead. Please check your profile settings."
msgstr ""
#. +> trunk5 stable5
#: Session.cpp:455
#, kde-format
msgid "Could not find an interactive shell to start."
msgstr ""
#. +> trunk5 stable5
#: Session.cpp:493
#, kde-format
msgid "Could not start program '%1' with arguments '%2'."
msgstr ""
#. +> trunk5 stable5
#: Session.cpp:636
#, kde-format
msgid "Silence in session '%1'"
msgstr ""
#. +> trunk5 stable5
#: Session.cpp:691
#, kde-format
msgid "Bell in session '%1'"
msgstr ""
#. +> trunk5 stable5
#: Session.cpp:704
#, kde-format
msgid "Activity in session '%1'"
msgstr ""
#. +> trunk5 stable5
#: Session.cpp:911
#, kde-format
msgid ""
"The D-Bus methods sendText/runCommand were just used. There are security concerns about allowing these methods to be public. If desired, these methods can be changed to internal use only by re-compiling Konsole. "
"<p>This warning will only show once for this Konsole instance.</p>"
msgstr ""
#. +> trunk5 stable5
#: Session.cpp:938
#, kde-format
msgctxt "@info:shell This session is done"
msgid "Finished"
msgstr ""
#. +> trunk5 stable5
#: Session.cpp:952 Session.cpp:965
#, kde-format
msgid "Program '%1' crashed."
msgstr ""
#. +> trunk5 stable5
#: Session.cpp:954
#, kde-format
msgid "Program '%1' exited with status %2."
msgstr ""
#. +> trunk5 stable5
#: Session.cpp:1381
#, kde-format
msgid "ZModem Progress"
msgstr ""
#. +> trunk5 stable5
#: SessionController.cpp:133
#, kde-format
msgid "Konsole"
msgstr ""
#. +> trunk5 stable5
#: SessionController.cpp:351
#, kde-format
msgid "Konsole does not know how to open the bookmark: "
msgstr ""
#. +> trunk5 stable5
#: SessionController.cpp:411
#, kde-format
msgid "Search for '%1' with"
msgstr ""
#. +> trunk5 stable5
#: SessionController.cpp:425
#, kde-format
msgid "Configure Web Shortcuts..."
msgstr ""
#. +> trunk5 stable5
#: SessionController.cpp:553
#, kde-format
msgid "&Close Session"
msgstr ""
#. +> trunk5 stable5
#: SessionController.cpp:555
#, kde-format
msgid "&Close Tab"
msgstr ""
#. +> trunk5 stable5
#: SessionController.cpp:563
#, kde-format
msgid "Open File Manager"
msgstr ""
#. +> trunk5 stable5
#: SessionController.cpp:590
#, kde-format
msgid "Paste Selection"
msgstr ""
#. +> trunk5 stable5
#: SessionController.cpp:597
#, kde-format
msgid "Web Search"
msgstr ""
#. +> trunk5 stable5
#: SessionController.cpp:604
#, kde-format
msgid "&Select All"
msgstr ""
#. +> trunk5 stable5
#: SessionController.cpp:608
#, kde-format
msgid "Select &Line"
msgstr ""
#. +> trunk5 stable5
#: SessionController.cpp:611
#, kde-format
msgid "Save Output &As..."
msgstr ""
#. +> trunk5 stable5
#: SessionController.cpp:617
#, kde-format
msgid "&Print Screen..."
msgstr ""
#. +> trunk5 stable5
#: SessionController.cpp:621
#, kde-format
msgid "Adjust Scrollback..."
msgstr ""
#. +> trunk5 stable5
#: SessionController.cpp:625
#, kde-format
msgid "Clear Scrollback"
msgstr ""
#. +> trunk5 stable5
#: SessionController.cpp:629
#, kde-format
msgid "Clear Scrollback and Reset"
msgstr ""
#. +> trunk5 stable5
#: SessionController.cpp:635
#, kde-format
msgid "Edit Current Profile..."
msgstr ""
#. +> trunk5 stable5
#: SessionController.cpp:638
#, kde-format
msgid "Switch Profile"
msgstr ""
#. +> trunk5 stable5
#: SessionController.cpp:655
#, kde-format
msgid "Set &Encoding"
msgstr ""
#. +> trunk5 stable5
#: SessionController.cpp:663
#, kde-format
msgctxt "@item:inmenu A read only (locked) session"
msgid "Read-only"
msgstr ""
#. +> trunk5 stable5
#: SessionController.cpp:674
#, kde-format
msgid "&Rename Tab..."
msgstr ""
#. +> trunk5 stable5
#: SessionController.cpp:680
#, kde-format
msgid "&All Tabs in Current Window"
msgstr ""
#. +> trunk5 stable5
#: SessionController.cpp:687
#, kde-format
msgid "&Select Tabs..."
msgstr ""
#. +> trunk5 stable5
#: SessionController.cpp:693
#, kde-format
msgctxt "@action:inmenu Do not select any tabs"
msgid "&None"
msgstr ""
#. +> trunk5 stable5
#: SessionController.cpp:701
#, kde-format
msgid "Copy Input To"
msgstr ""
#. +> trunk5 stable5
#: SessionController.cpp:708
#, kde-format
msgid "&ZModem Upload..."
msgstr ""
#. +> trunk5 stable5
#: SessionController.cpp:713
#, kde-format
msgid "Monitor for &Activity"
msgstr ""
#. +> trunk5 stable5
#: SessionController.cpp:718
#, kde-format
msgid "Monitor for &Silence"
msgstr ""
#. +> trunk5 stable5
#: SessionController.cpp:725
#, kde-format
msgid "Enlarge Font"
msgstr ""
#. +> trunk5 stable5
#: SessionController.cpp:733
#, kde-format
msgid "Shrink Font"
msgstr ""
#. +> trunk5 stable5
#: SessionController.cpp:740
#, kde-format
msgid "Send Signal"
msgstr ""
#. +> trunk5 stable5
#: SessionController.cpp:744
#, kde-format
msgid "&Suspend Task"
msgstr ""
#. +> trunk5 stable5
#: SessionController.cpp:749
#, kde-format
msgid "&Continue Task"
msgstr ""
#. +> trunk5 stable5
#: SessionController.cpp:754
#, kde-format
msgid "&Hangup"
msgstr ""
#. +> trunk5 stable5
#: SessionController.cpp:759
#, kde-format
msgid "&Interrupt Task"
msgstr ""
#. +> trunk5 stable5
#: SessionController.cpp:764
#, kde-format
msgid "&Terminate Task"
msgstr ""
#. +> trunk5 stable5
#: SessionController.cpp:769
#, kde-format
msgid "&Kill Task"
msgstr ""
#. +> trunk5 stable5
#: SessionController.cpp:774
#, kde-format
msgid "User Signal &1"
msgstr ""
#. +> trunk5 stable5
#: SessionController.cpp:779
#, kde-format
msgid "User Signal &2"
msgstr ""
#. +> trunk5 stable5
#: SessionController.cpp:903
#, kde-format
msgid "A program is currently running in this session. Are you sure you want to close it?"
msgstr ""
#. +> trunk5 stable5
#: SessionController.cpp:906
#, kde-format
msgid "The program '%1' is currently running in this session. Are you sure you want to close it?"
"<p>Applications that use KonsolePart share profiles.</p>"
"<p>They do not share with Konsole or other applications:"
"<ul>"
"<li>default profile</li>"
"<li>show in menu</li>"
"<li>shortcuts</li>"
"</ul>"
"</p>"
"<p>Feel free to open a Konsole <a href=\"https://bugs.kde.org/enter_bug.cgi?format=guided&product=konsole&component=kpart\">bug report</a> if you desire a change to how these are handled.</body></html>"
msgstr ""
#. +> trunk5 stable5
#: settings/ProfileSettings.cpp:153
#, kde-format
msgctxt "@info:tooltip"
msgid "Click to toggle status"
msgstr ""
#. +> trunk5 stable5
#: settings/ProfileSettings.cpp:159
#, kde-format
msgctxt "@info:tooltip"
msgid "Double click to change shortcut"
msgstr ""
#. +> trunk5 stable5
#: settings/ProfileSettings.cpp:193
#, kde-format
msgctxt "@title:column Profile label"
msgid "Name"
msgstr ""
#. +> trunk5 stable5
#: settings/ProfileSettings.cpp:194
#, kde-format
msgctxt "@title:column Display profile in file menu"
msgid "Show"
msgstr ""
#. +> trunk5 stable5
#: settings/ProfileSettings.cpp:195
#, kde-format
msgctxt "@title:column Profile shortcut text"
msgid "Shortcut"
msgstr ""
#. +> trunk5 stable5
#: settings/ProfileSettings.cpp:310
#, kde-format
msgctxt "@item This will be used as part of the file name"
msgid "Are you sure you want to paste %1 character?"
msgid_plural "Are you sure you want to paste %1 characters?"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
-#: TerminalDisplay.cpp:3256
+#: TerminalDisplay.cpp:3241
#, kde-format
msgid "Confirm Paste"
msgstr ""
#. +> trunk5 stable5
-#: TerminalDisplay.cpp:3468
+#: TerminalDisplay.cpp:3453
#, kde-format
msgid "<qt>Output has been <a href=\"http://en.wikipedia.org/wiki/Software_flow_control\">suspended</a> by pressing Ctrl+S. Press <b>Ctrl+Q</b> to resume.</qt>"
msgstr ""
#. +> trunk5 stable5
-#: TerminalDisplay.cpp:3506
+#: TerminalDisplay.cpp:3491
#, kde-format
msgid "This terminal is read-only."
msgstr ""
#. +> trunk5 stable5
-#: TerminalDisplay.cpp:3794
+#: TerminalDisplay.cpp:3779
#, kde-format
msgid "&Paste Location"
msgstr ""
#. +> trunk5 stable5
-#: TerminalDisplay.cpp:3811
+#: TerminalDisplay.cpp:3796
#, kde-format
msgid "Change &Directory To"
msgstr ""
#. +> trunk5 stable5
#: ViewContainer.cpp:328
#, kde-format
msgctxt "@action:inmenu"
msgid "&Detach Tab"
msgstr ""
#. +> trunk5 stable5
#: ViewContainer.cpp:333
#, kde-format
msgctxt "@action:inmenu"
msgid "&Rename Tab..."
msgstr ""
#. +> trunk5 stable5
#: ViewContainer.cpp:341
#, kde-format
msgctxt "@action:inmenu"
msgid "&Close Tab"
msgstr ""
#. +> trunk5 stable5
#: ViewContainer.cpp:347
#, kde-format
msgctxt "@info:tooltip"
msgid "Create new tab"
msgstr ""
#. +> trunk5 stable5
#: ViewContainer.cpp:349
#, kde-format
msgctxt "@info:whatsthis"
msgid "Create a new tab. Press and hold to select profile from menu"
msgstr ""
#. +> trunk5 stable5
#: ViewContainer.cpp:363
#, kde-format
msgctxt "@info:tooltip"
msgid "Close tab"
msgstr ""
#. +> trunk5 stable5
#: ViewContainer.cpp:364
#, kde-format
msgctxt "@info:whatsthis"
msgid "Close the active tab"
msgstr ""
#. +> trunk5 stable5
#: ViewContainerTabBar.cpp:63
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Tab Bar</title>"
"<para>The tab bar allows you to switch and move tabs. You can double-click a tab to change its name.</para>"
msgstr ""
#. +> trunk5 stable5
#: ViewManager.cpp:134
#, kde-format
msgctxt "@action Shortcut entry"
msgid "Next Tab"
msgstr ""
#. +> trunk5 stable5
#: ViewManager.cpp:135
#, kde-format
msgctxt "@action Shortcut entry"
msgid "Previous Tab"
msgstr ""
#. +> trunk5 stable5
#: ViewManager.cpp:137
#, kde-format
msgctxt "@action Shortcut entry"
msgid "Switch to Last Tab"
msgstr ""
#. +> trunk5 stable5
#: ViewManager.cpp:139
#, kde-format
msgctxt "@action Shortcut entry"
msgid "Next View Container"
msgstr ""
#. +> trunk5 stable5
#: ViewManager.cpp:141
#, kde-format
msgctxt "@action Shortcut entry"
msgid "Move Tab Left"
msgstr ""
#. +> trunk5 stable5
#: ViewManager.cpp:143
#, kde-format
msgctxt "@action Shortcut entry"
msgid "Move Tab Right"
msgstr ""
#. +> trunk5 stable5
#: ViewManager.cpp:151
#, kde-format
msgctxt "@action:inmenu"
msgid "Split View Left/Right"
msgstr ""
#. +> trunk5 stable5
#: ViewManager.cpp:159
#, kde-format
msgctxt "@action:inmenu"
msgid "Split View Top/Bottom"
msgstr ""
#. +> trunk5 stable5
#: ViewManager.cpp:164
#, kde-format
msgctxt "@action:inmenu Close Active View"
msgid "Close Active"
msgstr ""
#. +> trunk5 stable5
#: ViewManager.cpp:175
#, kde-format
msgctxt "@action:inmenu Close Other Views"
msgid "Close Others"
msgstr ""
#. +> trunk5 stable5
#: ViewManager.cpp:185
#, kde-format
msgctxt "@action:inmenu"
msgid "Expand View"
msgstr ""
#. +> trunk5 stable5
#: ViewManager.cpp:195
#, kde-format
msgctxt "@action:inmenu"
msgid "Shrink View"
msgstr ""
#. +> trunk5 stable5
#: ViewManager.cpp:208
#, kde-format
msgctxt "@action:inmenu"
msgid "D&etach Current Tab"
msgstr ""
#. +> trunk5 stable5
#: ViewManager.cpp:229
#, kde-format
msgctxt "@action Shortcut entry"
msgid "Switch to Tab %1"
msgstr ""
#. +> trunk5 stable5
#: Vt102Emulation.cpp:1229
#, kde-format
msgid "No keyboard translator available. The information needed to convert key presses into characters to send to the terminal is missing."
msgid "To import an existing data file, enter its filename here. You will then describe the contents of the file below. You can leave the filename blank to construct a catalog file with a valid header, but no data."
"This button will compute the field-of-view (FOV) angle for a specific eyepiece/telescope combination. You must first specify the focal lengths of the telescope and eyepiece, and the FOV angle of the eyepiece in the above entry fields.\n"
"\n"
"The computed FOV angle (in arcminutes) will be displayed in the \"Field of view\" edit box."
"Enter the telescope focal length, in millimeters.\n"
"\n"
"This is one of the data fields required for defining a field-of-view (FOV) symbol which matches the field-of-view of a camera mounted on a telescope."
"Enter the physical size of the CCD chip or film negative.\n"
"\n"
"This is one of the data fields required for defining a field-of-view (FOV) symbol which matches the field-of-view of a camera mounted on a telescope."
"This button will compute the field-of-view (FOV) angle for a specific camera/telescope combination. You must first specify the focal length of the telescope and the size of the CCD chip or film negative.\n"
"\n"
"The computed FOV angle (in arcminutes) will be displayed in the \"Field of view\" edit box."
"This button will compute the Half Power Beam Width (HPBW) angle for a specific radiotelescope and observing wavelength combination, assuming no multibeam receiver is available at the telescope. You must first specify the diameter of the radiotelescope and the observing wavelength.\n"
"\n"
"The computed HPBW angle (in arcminutes) will be displayed in the \"Field of view\" edit box."
"<p>Frame rotation with respect to Celestial Pole. Zero degrees indicates that <span style=\" font-weight:600;\">UP</span> is pointing directly at the pole. 90 degrees indicates that <span style=\" font-weight:600;\">UP</span> is rotated 90 degrees clockwise with respect to the pole.</p>"
"<p>KStars can make use of Astrometry.net to plate solve images to aid with telescope alignment. You can use the online solver without any changes. To use the offline solver, you need to verify that certain programs are installed and that astrometry is configured properly. KStars for Mac includes Astrometry.net</p>"
"<p>To plate solve, you also need to put index files in the following folder. You can install the files that you need inside Ekos. You can also download them from the internet. See the documentation at this link: <a href=\"http://astrometry.net/doc/readme.html\"><span style=\" text-decoration: underline; color:#0000ff;\">Astrometry Readme</span></a> for details on how to get files. Note that you do not need all of the index files, the ones you need depend on your field size.</p>"
"<p>Your data directory was not found. You can click the button below to copy a default KStars data directory to the correct location, or if you have a KStars directory already some place else, you can exit KStars and copy it to that location yourself.</p>"
msgid "Installing this in your data directory will enable the CCD Simulator in KStars to take realistic images. This is useful for testing sequences, plate solving, and learning to use KStars. Just click the button to install or unzip the zip file and place the gsc folder in the data directory."
"<p>You may now download optional data files to enhance KStars, such as Messier object images, or a more complete NGC/IC catalog. Press the <b>Download Extra Data</b> button to proceed. </p>"
"<p>You can also use this tool later, by selecting <b>Download New Data</b> from the <b>File</b> menu.</p>"
msgid "Are you sure you want to clear all of the solution points?"
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:1473
#, kde-format
msgid "Clear Solution Points"
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:1489
#, kde-format
msgid "Are you sure you want to clear all the alignment points?"
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:1490
#, kde-format
msgid "Clear Align Points"
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:1639
#, kde-format
msgid "The Mount Model Tool is Reset."
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:1676
#, kde-format
msgid "Please Check the Alignment Points."
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:1683
#, kde-format
msgid "In the Align Module, \"Nothing\" is Selected for the Solver Action. This means that the mount model tool will not sync/align your mount but will only report the pointing model errors. Do you wish to Continue?"
msgid "Blind solver takes a very long time to solve but can reliably solve any image any where in the sky given enough time."
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:2750
#, kde-format
msgid "Use existing settings"
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:2751
#, kde-format
msgid "Mount must be pointing close to the target location and current field of view must match the image's field of view."
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:2754
#, kde-format
msgid "No metadata is available in this image. Do you want to use the blind solver or the existing solver settings?"
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:2756
#, kde-format
msgid "Astrometry solver"
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:2812
#, kde-format
msgid "Solver iteration #%1"
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:2850
#, kde-format
msgid "Solver RA (%1) DEC (%2) Orientation (%3) Pixel Scale (%4)"
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:2859
#, kde-format
msgid "Current focal length is %1 mm while computed focal length from the solver is %2 mm. Please update the mount focal length to obtain accurate results."
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:2984
#, kde-format
msgid "WCS information updated. Images captured from this point forward shall have valid WCS."
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:3000
#, kde-format
msgid "Solution coordinates: RA (%1) DEC (%2) Telescope Coordinates: RA (%3) DEC (%4)"
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:3006
#, kde-format
msgid "Target is within %1 degrees of solution coordinates."
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:3062
#, kde-format
msgid "Setting position angle to %1 degrees E of N..."
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:3089
#, kde-format
msgid "Maximum number of iterations reached. Solver failed."
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:3121
#, kde-format
msgid "Target is within acceptable range. Astrometric solver is successful."
msgid "Slewing to calibration position, please wait until telescope completes slewing."
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:4144
#, kde-format
msgid "Load Image"
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:4309
#, kde-format
msgid "World Coordinate System (WCS) is enabled. CCD rotation must be set either manually in the CCD driver or by solving an image before proceeding to capture any further images, otherwise the WCS information may be invalid."
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:4318
#, kde-format
msgid "World Coordinate System (WCS) is disabled."
msgid "Failed to process World Coordinate System: %1. Try again."
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:5008
#, kde-format
msgid "Celestial pole is located outside of the field of view. Would you like to sync and slew the telescope to the celestial pole? WARNING: Slewing near poles may cause your mount to end up in unsafe position. Proceed with caution."
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:5024
#, kde-format
msgid "Warning: Celestial pole is located outside the field of view. Move the mount closer to the celestial pole."
msgid "Accuracy threshold in arcseconds between solution and target coordinates. Plate solver shall be repeatedly executed until the solution coordinates are below the accuracy threshold"
"<p>Use astrometry solver on remote machine running INDI server. You must select <b>Astrometry</b> driver from Auxiliary drivers in your Ekos devices profile for this option to be enabled.</p>"
"<p>The results from Astrometric Solutions from the Capture and Solve Tool, the Load and Slew Tool, and the Mount Model Tool will be displayed below.</p>"
"<p>Remove the selected row from the solutions table. This can be useful for getting rid of results that did not actually solve from the table and/or results that you do not need any more. It can clean up clutter on both the graph and table.</p>"
"<p>Launch the mount model tool. This tool enables you to create pre-programmed list of points to go to and solve. It can aid in building a pointing model for better accuracy.</p>"
"<p>This tool provides a simple method to polar align a German equatorial mount. <span style=\" font-weight:600;\">Unpark</span> your mount, <span style=\" font-weight:600;\">Point</span> toward the celestial pole, and <span style=\" font-weight:600;\">Engage</span> sidereal tracking.</p>"
"<p>Click <span style=\" font-weight:600;\">Start</span> to begin the process.</p>"
"<p>The assistant requires three images to find a solution. The first image shall now be captured and solved. Click <span style=\" font-weight:600;\">Capture</span> to start.</p>"
"<p>Select direction and range of <span style=\" font-style:italic;\">first</span> mount rotation, then click <span style=\" font-weight:600;\">Rotate</span> to continue. To automate the rest of the process, check <span style=\" font-weight:600;\">Auto Mode</span>.</p>"
"<p>Correction vector is plotted above. Select a bright star to reposition the correction vector. Click <span style=\" font-weight:600;\">Next</span> when done.</p>"
"<p>Adjust mount's Altitude and Azimuth knobs until the selected star is centered within the crosshair. Click <span style=\" font-weight:600;\">Refresh</span> to begin continuous capture. Click <span style=\" font-weight:600;\">Done</span> when star is centered.</p>"
"<p>This tool can help your mount build a better pointing model by moving the mount to different points in the sky and solving captured images. This can increase the accuracy of your GOTOs. To qualify, your mount must be capable of improving its internal pointing model after each <b>Sync</b> commanded by Ekos. If this is not the case, then this tool is not suitable for your mount.</p>"
"<p>The Number of points the wizard should generate. If this number is less than 5, it will generate them at the same DEC. After that they will be evenly distributed over RA and DEC. Note, if Fixed DEC is selected, all of the points will be at the same DEC.</p>"
"<p>Automatically generate the specified number of alignment points in the table below. They will be generated based on the options selected in this wizard.</p>"
"<p>Select the type of objects/points added by the wizard.</p>"
"<p><span style=\" font-weight:600;\">Note:</span> all of the options except Fixed DEC start with a grid of RA/DEC points.</p>"
"\n"
"<ul>\n"
"<li><b>Any Stars:</b> The wizard searches for the nearest star.</li>"
"\n"
"<li><b>Any object:</b> The wizard searches for the nearest object of any type.</li>"
"\n"
"<li><b>Named Stars</b> The wizard searches for the nearest star in the currently visible star list. Note that the first named star might be fairly far from the intended point and also sometimes the same star could be the closest one for multiple points.</li>"
"\n"
"<li><b>Fixed DEC:</b> The wizard generates all points at the chosen DEC.</li>"
"\n"
"<li><b>Fixed Grid:</b> The wizard just uses the original grid without trying to pair it with objects.</li>"
"<p>These are the common names for the named stars that are currently up at your location. If you select a star, it will be added to the table below.</p>"
"<p>These are the Greek names for the brighter stars that are currently up at your location. If you select a star, it will be added to the table below.</p>"
"<p>Clear the entire table of alignment points below. Note that this will not affect your mount in any way. It will not clear your pointing model. It just clears the list of points so that if you run the mount model routine again, these points will not be included.</p>"
"<p>Remove the selected row from the alignment point table below. Note that it does <b>not</b> command your mount to clear that point from the model, it just means that if you run the mount model routine, that point will not be included in the list.</p>"
"<p>Add an empty row to the alignment list so that you can manually add an RA and DE for a position you would like the telescope to slew to when doing the mount model routine.</p>"
"<p>Open the Find Object dialog so that you can select an object to get an RA and DEC automatically that you would like the telescope to slew to when doing the mount model routine.</p>"
"<p>Sort the alignment points, starting with the point closest to the current telescope position, to try to minimize the distance between each slew.</p>"
"<p>This is a table of alignment points that you would like the mount model routine to use in aligning your telescope. If you would like to add or remove points, you may use the buttons above. If you would like to run, pause, or stop the mount model routine, you may use the buttons below. You can directly edit an RA or DE for a particular point directly in the cells. Just be sure to follow the format hh:mm:ss. The object name is just provided for convenience and is not used. If you want to change the order of the alignment points, you can drag the row up or down using the vertical header for that row on the left. </p>"
"<p>Start or pause the mount model routine. It will slew to and astrometrically solve the list of points in the table above using the settings in the align module. If the routine was previously paused, it will pick up where it left off. If it was stopped or it had finished it will start the routine over again.</p>"
"<p>Stop the mount model routine. It will <b>not</b> clear any points from your telescope's pointing model. It will stop the routine and any points currently being solved. If you run the mount model again after hitting stop, it will start the routine over again with the first point.</p>"
"</body></html>"
msgstr ""
#. +> trunk5
#: ekos/align/offlineastrometryparser.cpp:64
#, kde-format
msgid "Failed to find astrometry.net binaries. Please ensure astrometry.net is installed and try again."
msgstr ""
#. +> trunk5
#: ekos/align/offlineastrometryparser.cpp:65
#, kde-format
msgid "Missing astrometry files"
msgstr ""
#. +> trunk5
#: ekos/align/offlineastrometryparser.cpp:91
#, kde-format
msgid "Detected Astrometry.net version %1"
msgstr ""
#. +> trunk5
#: ekos/align/offlineastrometryparser.cpp:96
#, kde-format
msgid "Setting astrometry option --no-fits2fits"
msgstr ""
#. +> trunk5
#: ekos/align/offlineastrometryparser.cpp:101
#, kde-format
msgid "Turning off option --no-fits2fits"
msgstr ""
#. +> trunk5
#: ekos/align/offlineastrometryparser.cpp:186
#, kde-format
msgid "Index file %1 is missing. Astrometry.net would not be able to adequately solve plates until you install the missing index files. Download the index files from http://www.astrometry.net"
msgstr ""
#. +> trunk5
#: ekos/align/offlineastrometryparser.cpp:190
#, kde-format
msgid "Index files %1 to %2 are missing. Astrometry.net would not be able to adequately solve plates until you install the missing index files. Download the index files from http://www.astrometry.net"
msgstr ""
#. +> trunk5
#: ekos/align/offlineastrometryparser.cpp:210
#: ekos/align/opsastrometrycfg.cpp:47
#: ekos/align/opsastrometryindexfiles.cpp:206
#, kde-format
msgid ""
"Astrometry configuration file corrupted or missing: %1\n"
"Please set the configuration file full path in INDI options."
msgstr ""
#. +> trunk5
#: ekos/align/offlineastrometryparser.cpp:232
#: ekos/align/opsastrometryindexfiles.cpp:228
#, kde-format
msgid "Unable to find data dir in astrometry configuration file."
msgstr ""
#. +> trunk5
#: ekos/align/offlineastrometryparser.cpp:282
#, kde-format
msgid "Error starting solver: %1"
msgstr ""
#. +> trunk5
#: ekos/align/offlineastrometryparser.cpp:300
#, kde-format
msgid "Starting solver..."
msgstr ""
#. +> trunk5
#: ekos/align/offlineastrometryparser.cpp:333
#: ekos/align/remoteastrometryparser.cpp:245
#, kde-format
msgid "Solver failed. Try again."
msgstr ""
#. +> trunk5
#: ekos/align/offlineastrometryparser.cpp:357
#, kde-format
msgid "WCS header missing or corrupted. Solver failed."
msgstr ""
#. +> trunk5
#: ekos/align/offlineastrometryparser.cpp:390
#: ekos/align/onlineastrometryparser.cpp:480
#: ekos/align/remoteastrometryparser.cpp:287
#, kde-format
msgid "Solver completed in %1 second."
msgid_plural "Solver completed in %1 seconds."
msgstr[0] ""
msgstr[1] ""
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:76
#, kde-format
msgid "Error: No connection to the internet."
msgstr ""
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:184
#, kde-format
msgid "Failed to open file %1. %2"
msgstr ""
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:255
#, kde-format
msgid "Uploading file..."
msgstr ""
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:328
#, kde-format
msgid "JSon error during parsing (%1)."
msgstr ""
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:346
#, kde-format
msgid "Astrometry.net authentication failed. Check the validity of the Astrometry.net API Key."
msgstr ""
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:354
#, kde-format
msgid "Authentication to astrometry.net is successful. Session: %1"
msgstr ""
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:363
#, kde-format
msgid "Upload failed."
msgstr ""
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:372
#, kde-format
msgid "Parsing submission ID failed."
msgstr ""
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:377
#, kde-format
msgid "Upload complete. Waiting for astrometry.net solver to complete..."
msgstr ""
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:400
#, kde-format
msgid "Failed to retrieve job ID."
msgstr ""
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:425
#, kde-format
msgid "Solver timed out."
msgstr ""
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:434
#, kde-format
msgid "Solver failed after %1 second."
msgid_plural "Solver failed after %1 seconds."
msgstr[0] ""
msgstr[1] ""
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:444
#, kde-format
msgid "Error parsing parity."
msgstr ""
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:451
#, kde-format
msgid "Error parsing orientation."
msgstr ""
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:459
#, kde-format
msgid "Error parsing RA."
msgstr ""
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:466
#: ekos/align/onlineastrometryparser.cpp:474
#, kde-format
msgid "Error parsing DEC."
msgstr ""
#. +> trunk5
#: ekos/align/opsalign.cpp:36
#, kde-format
msgid "Internal or External Plate Solver?"
msgstr ""
#. +> trunk5
#: ekos/align/opsalign.cpp:41
#, kde-format
msgid "Internal or External astrometry.cfg?"
msgstr ""
#. i18n: ectx: label, entry (AstrometryWCSIsInternal), group (Align)
"<p>On Load & Slew, solve the image and slew the mount to the target location and then rotate the camera to match the orientation of the FITS image.</p>"
"<p>Rotator threshold in arc-minutes when using Load & Slew. If the difference between measured position angle and FITS position angle is below this value, the Load & Slew operation is considered successful.</p>"
"<p>This option should <span style=\" font-weight:600;\">ONLY</span> be checked if your astrometry.net version is 0.67 or earlier. Uncheck for any versions greater than 0.67</p>"
"<p>This will prevent the solver from looking at an already existing WCS Header before blindly trying to solve the image. It is recommended to keep it checked.</p>"
"<p>Do not use Sync when Slew to Target is selected. Use differential slewing to correct for discrepancies. This is useful on some mounts (e.g. Paramount).</p>"
"<p><span style=\" font-weight:600;\">Offline</span> astrometry.net solver requires index files in order to solve an image. The following list provides a complete list of the index files, along with recommended index files to install given current CCD Field of View. Installed index files are checked. Next to each index file is an icon that represents the following:</p>"
"<p>This button will open the Astrometry Index File folder on your filesystem so that you can see where it is located and copy files into it if needed.</p>"
"<p>Enable Logs to diagnose issues with Ekos and INDI. Only enable the necessary logs to help in diagnosing specific problems. Logs consume resources and may slow the system down. Turn off logs when no longer used.</p>"
"<p>Accept ADU values that fall within this range around the desired ADU target. For example, if the ADU value was set to 10000 and the tolerance was set to 100, then frames with ADU values f 9900 and 10100 shall be accepted.</p>"
"<li><strong>Client</strong>: Captured images are only uploaded to Ekos.</li>"
"\n"
"<li><strong>Local</strong>: Captured images are only saved locally on the remote computer.</li>"
"\n"
"<li><strong>Both</strong>: Captured images are saved on remote device <b>and</b> uploaded to Ekos.</li>"
"\n"
"</ol>"
"\n"
"<p>When selecting <i>Local</i> or <i>Both</i>, you must specify the remote directory where the remote images are saved to. By default, all captured images are uploaded to Ekos."
"<p>Command a meridian flip if the hour angle exceeds the specified value. Capture and Guiding will be suspended and resumed after the flip is complete.</p>"
"<p>Select custom properties to be set when the sequence job is executed in batch mode. After the desired property value is set in INDI Control Panel, add it to the<span style=\" font-weight:600;\"> Job Properties</span> section. Click <span style=\" font-weight:600;\">Apply</span> to record the property values.</p>"
"<p>Please fill the required information below. This is a one-time setup. You can obtain these values from your camera manual or from online sources such as <a href=\"http://www.digicamdb.com/\"><span style=\" text-decoration: underline; color:#007af4;\">Digital Camera Database</span></a>.</p>"
"<p>Position Angle (PA) is defined as degrees E of N. Zero degrees indicate frame <span style=\" font-weight:600;\">UP</span> points directly toward the celestial pole. 90 degrees indicate frame <span style=\" font-weight:600;\">UP</span> points 90 degrees counter-clockwise with respect to the celestial pole.</p>"
"<p>PA is calculated from raw rotator angle plus modifiers to match the rotation angle as measured by astrometry. Enter the modifiers manually or solve an image in the Align Module to generate them automatically.</p>"
msgid "<b>Initial</b> step size in ticks to cause a noticeable change in HFR value. For timer based focuser, it is the initial time in milliseconds to move the focuser inward or outward"
"<li><b>Iterative</b>: Moves focuser by discreet steps initially decided by the step size. Once a curve slope is calculated, further step sizes are calculated to reach optimal solution. The algorithm stops when the measured HFR is within percentage tolerance of the minimum HFR recorded in the procedure.</li>"
"\n"
"<li><b>Polynomial</b>: Starts with iterative method. Upon crossing to the other side of the V-Curve, polynomial fitting coefficients along with possible minimum solution are calculated. This algorithm can be faster than purely iterative approach given a good data set.</li>"
msgid "You must stop auto guiding before changing this setting."
msgstr ""
#. +> trunk5
#: ekos/guide/guide.cpp:2476
#, kde-format
msgid "Rapid Guiding is enabled. Guide star will be determined automatically by the CCD driver. No frames are sent to Ekos unless explicitly enabled by the user in the CCD driver settings."
msgstr ""
#. +> trunk5
#: ekos/guide/guide.cpp:2479
#, kde-format
msgid "Rapid Guiding is disabled."
msgstr ""
#. +> trunk5
#: ekos/guide/guide.cpp:2715
#, kde-format
msgctxt "Drift graphics tooltip; %1 is local time; %2 is RA deviation; %3 is DE deviation in arcseconds;"
"<p>Subframe the image around the guide star. Before checking this option, you must <span style=\" font-weight:600;\">first</span> capture an image and select a guide star. Uncheck it to take a full frame again.</p>"
msgid "Mount guiding rate. Find out the guiding rate used by your mount and update the value here to get the <b>recommended</b> value of proportional gain suitable for your mount. Setting this value <b>does not</b> change your mount guiding rate!"
"<p>Proportional term accounts for present values of the error. For example, if the error is large and positive, the guider corrective pulse will also be large and positive.</p>"
"<p>Integral term accounts for past values of the error. For example, if the current pulse is not sufficiently strong, the integral of the error will accumulate over time, and the guider will respond by applying a stronger action.</p>"
msgid "Maximum deviation to correct for using Adaptive Optics unit. If the guiding deviation exceeds this value, Ekos will guide the mount mechanically"
"<p>Drag the slider to scroll through guide history while displaying the RA and DEC error points on both graphs. Dragging to the far right will set the guide plots to display the latest guide data and autoscroll the graph.</p>"
"<p>Autoscale both Guide Graphs to their default scale. If any points are located outside this range, the view is expanded to include them (with the exception of the time axis in the drift graphics).</p>"
"<p>Lead time is the minimum time in minutes between jobs. The scheduler starts execution of a job before its scheduled startup time by this lead time. Early execution is useful as focusing, alignment, and guiding procedures may take prolonged periods to time to complete.</p>"
"<p>In case no scheduler job is scheduled for this many hours, perform a complete shutdown procedure and restart observatory operations once the next job is ready.</p>"
msgid "Maximum acceptable difference between requested and measured temperature set point. When the temperature threshold is below this value, the temperature set point request is deemed successful."
"<p>If using a filter wheel and an absolute position focuser, then always remember the focus position of the autofocus process for light frames in each filter. Before a flat frame is captured, the focuser is moved to the same focus point as light frames.</p>"
"<p>Set HFR Threshold percentage gain. When an autofocus operation is completed, the autofocus HFR value is increased by this threshold percentage value and stored within the capture module. If In-Sequence-Focus is engaged, the autofocus module only performs autofocusing procedure if current HFR value exceeds the capture module HFR threshold. Increase value to permit more relaxed changes in HFR values without requiring a full autofocus run.</p>"
"<p>In-Sequence HFR threshold value controls when the autofocus process is started. If the measured HFR value exceeds the HFR threshold, autofocus process is initiated. If the HFR threshold value is zero initially (default), then the autofocus process best HFR value is used to set the new HFR threshold, after applying the HFR threshold modifier percentage. This new HFR threshold is then used for subsequent In-Sequence focus checks. If this option is enabled, the HFR threshold value is constant and gets saved to the sequence file.</p>"
#. i18n: ectx: label, entry (MaxDarkTemperatureDiff), group (DarkLibrary)
#. +> trunk5
#: ekos/opsekos.ui:576 kstars.kcfg:1472
#, kde-format
msgid "Maximum acceptable difference between current and recorded dark frame temperature set point. When the difference exceeds this value, a new dark frame shall be captured for this set point."
"<p>Welcome to the <span style=\" font-weight:600;\">Ekos Profile Wizard!</span></p>"
"<p>Ekos is the premier observatory control and automation platform. With Ekos, you can capture images and gather scientific data with ease. This Wizard will help you create your equipment profile. You will be asked to verify some basic information. </p>"
"<p>Please click <span style=\" font-weight:600;\">next</span> to continue. </p>"
"<p><a href=\"https://github.com/knro/indiwebmanager\"><span style=\" text-decoration: underline; color:#007af4;\">INDI Web Manager</span></a> running on the Remote Computer?</p>"
"<p><span style=\" font-weight:600;\">Tip</span>: <span style=\" font-style:italic;\">INDI Web Manager</span> is a service that runs on remote devices to help you start and stop INDI services remotely.</p>"
"<p>To use Ekos with your equipment locally on Windows, you need to download and install <a href=\"http://www.cloudmakers.eu/windi/\"><span style=\" text-decoration: underline; color:#007af4;\">INDI Server for Windows</span></a>.</p>"
"<p>After installing <span style=\" font-style:italic;\">INDI Server for Windows (wINDI)</span>, establish connection with your equipment. wINDI requires <a href=\"http://www.ascom-standards.org/\"><span style=\" text-decoration: underline; color:#007af4;\">ASCOM</span></a> drivers for all your equipment, so make sure to install all necessary ASCOM drivers for your gear.</p>"
"<p>After successfully starting INDI Server in wINDI, click <span style=\" font-weight:600;\">Ready</span> to continue.</p>"
"<p><span style=\" font-weight:600;\">Tip</span>: INDI Server for Windows functionality is limited compared to the native INDI drivers on Linux. It is recommended to install native INDI on an embedded Linux device such as <a href=\"http://indilib.org/support/tutorials/169-ekos-on-raspberry-pi-complete-guide.html\"><span style=\" text-decoration: underline; color:#007af4;\">Raspberry PI</span></a>.</p>"
"<p><span style=\" font-weight:600;\">Tip</span>: External INDI Server can be <a href=\"http://www.cloudmakers.eu/indiserver/\"><span style=\" text-decoration: underline; color:#007af4;\">INDI Server for OSX</span></a> or an INDI Server launched manually locally. If unsure, select Internal INDI Server.</p>"
"<p><span style=\" font-weight:600;\">Tip</span>: Internal Guider is recommended. Using external guider applications requires additional setup instructions outside the scope of Ekos.</p>"
"<p>If the remote computer has astrometry.net installed, you can run the remote astrometry driver and use it to solve images in Ekos Align module.</p>"
"<p>Use the INDI WatchDog driver. It monitors connection between your remote equipment and Ekos. If the communication is lost between the two, the WatchDog driver goes into safe mode and executes a shutdown procedure to protect your equipment.</p>"
"<p>If you plan to use SkySafari to monitor and/or control your mount, check this box to start INDI SkySafari Server. You can connect SkySafari to this server and it shall enable you to connect and control your mount. For more details, please check the <a href=\"http://indilib.org/devices/telescopes/skysafari.html\"><span style=\" text-decoration: underline; color:#007af4;\">INDI SkySafari Documentation.</span></a></p>"
msgid "Camera's rotation angle (East of North) in degrees. To measure the angle, solve an image and use the astrometry solver solution's rotation angle"
msgid "You cannot add or modify a job while the scheduler is running."
msgstr ""
#. +> trunk5
#: ekos/scheduler/scheduler.cpp:388
#, kde-format
msgid "Warning! Job '%1' has completion condition set to infinite repeat, other jobs may not execute."
msgstr ""
#. +> trunk5
#: ekos/scheduler/scheduler.cpp:392
#, kde-format
msgid "Target name is required."
msgstr ""
#. +> trunk5
#: ekos/scheduler/scheduler.cpp:398
#, kde-format
msgid "Sequence file is required."
msgstr ""
#. +> trunk5
#: ekos/scheduler/scheduler.cpp:405
#, kde-format
msgid "Target coordinates are required."
msgstr ""
#. +> trunk5
#: ekos/scheduler/scheduler.cpp:429
#, kde-format
msgid "RA value %1 is invalid."
msgstr ""
#. +> trunk5
#: ekos/scheduler/scheduler.cpp:437
#, kde-format
msgid "DEC value %1 is invalid."
msgstr ""
#. +> trunk5
#: ekos/scheduler/scheduler.cpp:495
#, kde-format
msgid "Warning! Job '%1' has startup time %1 resulting in a negative score, and will be marked invalid when processed."
msgstr ""
#. +> trunk5
#: ekos/scheduler/scheduler.cpp:500
#, kde-format
msgid "Warning! Job '%1' has fixed startup time %1 set in the past, and will be marked invalid when evaluated."
msgstr ""
#. +> trunk5
#: ekos/scheduler/scheduler.cpp:558
#, kde-format
msgid "Warning! Job '%1' at row %2 has a duplicate at row %3 (same target, same sequence file), the scheduler will consider the same storage for captures!"
msgstr ""
#. +> trunk5
#: ekos/scheduler/scheduler.cpp:562
#, kde-format
msgid "Warning! Job '%1' at row %2 requires a specific startup time or a different priority, and a greater repeat count (or disable option 'Remember job progress')"
msgstr ""
#. +> trunk5
#: ekos/scheduler/scheduler.cpp:642
#, kde-format
msgid "Warning! You cannot reset a job while the scheduler is running."
msgstr ""
#. +> trunk5
#: ekos/scheduler/scheduler.cpp:655
#, kde-format
msgid "Job '%1' status was reset."
msgstr ""
#. +> trunk5
#: ekos/scheduler/scheduler.cpp:665
#, kde-format
msgid "Warning! You cannot add or modify a job while the scheduler is running."
msgstr ""
#. +> trunk5
#: ekos/scheduler/scheduler.cpp:888
#, kde-format
msgid "Job '%1' has not been processed upon scheduler stop, marking aborted."
msgstr ""
#. +> trunk5
#: ekos/scheduler/scheduler.cpp:895
#, kde-format
msgid "Scheduler aborted."
msgstr ""
#. +> trunk5
#: ekos/scheduler/scheduler.cpp:951
#, kde-format
msgid "Scheduler is in shutdown until next job is ready"
msgid "Scheduler is awake. Jobs shall be started when ready..."
msgstr ""
#. +> trunk5
#: ekos/scheduler/scheduler.cpp:1663
#, kde-format
msgid "Scheduler is awake. Jobs shall be started when scheduler is resumed."
msgstr ""
#. +> trunk5
#: ekos/scheduler/scheduler.cpp:1730
#, kde-format
msgid "Warning! Job '%1' reaches an altitude of %2 degrees at %3 but will not be scheduled due to close proximity to astronomical twilight rise."
msgstr ""
#. +> trunk5
#: ekos/scheduler/scheduler.cpp:1743
#, kde-format
msgid "Job '%1' is scheduled to start at %2 where its altitude is %3 degrees."
msgstr ""
#. +> trunk5
#: ekos/scheduler/scheduler.cpp:1754
#, kde-format
msgid "Warning! Job '%1' has no night time with an altitude above %2 degrees during the next 24 hours, marking invalid."
msgstr ""
#. +> trunk5
#: ekos/scheduler/scheduler.cpp:1757
#, kde-format
msgid "Warning! Job '%1' cannot rise to an altitude above %2 degrees in the next 24 hours, marking invalid."
msgstr ""
#. +> trunk5
#: ekos/scheduler/scheduler.cpp:1760
#, kde-format
msgid "Warning! Job '%1' cannot be scheduled with an altitude above %2 degrees with minimum moon separation of %3 degrees in the next 24 hours, marking invalid."
msgstr ""
#. +> trunk5
#: ekos/scheduler/scheduler.cpp:1783
#, kde-format
msgid "%1 Transit time is %2"
msgstr ""
#. +> trunk5
#: ekos/scheduler/scheduler.cpp:1792
#, kde-format
msgid "%1 Observation time is %2 adjusted for %3 minute."
msgid_plural "%1 Observation time is %2 adjusted for %3 minutes."
msgstr[0] ""
msgstr[1] ""
#. +> trunk5
#: ekos/scheduler/scheduler.cpp:1798
#, kde-format
msgid "%1 culminates during the day and cannot be scheduled for observation."
msgstr ""
#. +> trunk5
#: ekos/scheduler/scheduler.cpp:1804
#, kde-format
msgid "Observation time for %1 already passed."
msgstr ""
#. +> trunk5
#: ekos/scheduler/scheduler.cpp:1828
#, kde-format
msgid "Weather conditions are OK."
msgstr ""
#. +> trunk5
#: ekos/scheduler/scheduler.cpp:1832
#, kde-format
msgid "Warning! Weather conditions are in the WARNING zone."
msgstr ""
#. +> trunk5
#: ekos/scheduler/scheduler.cpp:1836
#, kde-format
msgid "Caution! Weather conditions are in the DANGER zone!"
msgstr ""
#. +> trunk5
#: ekos/scheduler/scheduler.cpp:1843
#, kde-format
msgid "Warning: Ekos did not receive any weather updates for the last %1 minutes."
msgstr ""
#. +> trunk5
#: ekos/scheduler/scheduler.cpp:1864
#, kde-format
msgid "Weather conditions in warning zone"
msgstr ""
#. +> trunk5
#: ekos/scheduler/scheduler.cpp:1872
#, kde-format
msgid "Weather conditions are critical. Observatory shutdown is imminent"
msgstr ""
#. +> trunk5
#: ekos/scheduler/scheduler.cpp:1888
#, kde-format
msgid "Starting shutdown procedure due to severe weather."
msgstr ""
#. +> trunk5
#: ekos/scheduler/scheduler.cpp:2021
#, kde-format
msgid "Job '%1' target altitude is %3 degrees at %2 (score %4)."
msgstr ""
#. +> trunk5
#: ekos/scheduler/scheduler.cpp:2105
#, kde-format
msgid "Job '%1' target is %3 degrees from Moon (score %2)."
msgstr ""
#. +> trunk5
#: ekos/scheduler/scheduler.cpp:2123
#, kde-format
msgid "Astronomical twilight rise is at %1, set is at %2, and current time is %3"
msgid "Warning! Turning off astronomial twilight check may cause the observatory to run during daylight. This can cause irreversible damage to your equipment!"
msgid "Select optional FITS file to be used for alignment. When using FITS, specify the object or the estimated coordinates which are used to slew the mount."
msgid "Start the observation job when the object reaches culmination adjusted for the offset value in minutes. By default, the observation job runs 60 minutes prior to culmination."
"<p>One-time startup procedure to be executed before starting Ekos. The script is executed <span style=\" font-weight:600; text-decoration: underline;\">before</span> the startup procedures (e.g. unpark scope), if selected, are executed.</p>"
"<p>One-time shutdown procedure to be executed after all scheduler jobs are completed. The script is executed <span style=\" font-weight:600; text-decoration: underline;\">after</span> the shutdown procedures (e.g. parking), if selected, are completed.</p>"
"<li style=\" margin-top:12px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-weight:600;\">Auto Debayer</span>: Bayered images will not be debayered. Only grayscale images are shown.</li>"
"<li style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-weight:600;\">Auto WCS</span>: World Coordinate System data will not be processed. WCS maps sky coordinates to image coordinates. Equatorial grid lines, object identification, and telescope slew within an image are disabled.</li>"
"<li style=\" margin-top:0px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-weight:600;\">3D Cube</span>: RGB images will not be processed. Only grayscale images are shown.</li>"
"<p>Automatically load World-Coordinate-System (WCS) data when opening a FITS file.</p>"
"<p><span style=\" font-weight:600;\">Warning: Only enable this option on very fast machines as it can lead to unpredictable behavior resulting in crashes on slower machines.</span></p>"
"<p>Mount handset is the master source of time and location settings. KStars time and location settings are synchronized with controller settings.</p>"
"<p>Set SER video <b>remote</b> directory name. If INDI server is running locally, then a local directory can be selected. However, if you are connected to a remote INDI server, then the directory must be a valid directory on the remote file system where it is saved.</p>"
"\n"
"<p>Record directories may contain some patterns to make them dynamic:</p>"
"Verify if the following time, date, and location settings are correct. If any of the settings are incorrect, you can correct them via the <tt>Set time</tt> and <tt>Set Location</tt> buttons.\n"
"Enter the port number your telescope is connected to. If you only have one serial port in your computer, the port is usually <tt>/dev/ttyUSB0</tt>\n"
"<br>"
"<br>"
"If you are unsure about the port number, you can leave the field empty and KStars will try to scan the ports for attached telescopes. Beware that the autoscan process might take a few minutes to complete. "
msgid "Switch to horizonal view (Horizontal &Coordinates)"
msgstr ""
#. i18n: ectx: label, entry (PositionTimeBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:9
#, kde-format
msgid "Position of the time InfoBox."
msgstr ""
#. i18n: ectx: whatsthis, entry (PositionTimeBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:10
#, kde-format
msgid "The screen coordinates of the Time InfoBox."
msgstr ""
#. i18n: ectx: label, entry (PositionFocusBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:14
#, kde-format
msgid "Position of the focus InfoBox."
msgstr ""
#. i18n: ectx: whatsthis, entry (PositionFocusBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:15
#, kde-format
msgid "The screen coordinates of the Focus InfoBox."
msgstr ""
#. i18n: ectx: label, entry (PositionGeoBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:19
#, kde-format
msgid "Position of the geographic InfoBox."
msgstr ""
#. i18n: ectx: whatsthis, entry (PositionGeoBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:20
#, kde-format
msgid "The screen coordinates of the Geographic Location InfoBox."
msgstr ""
#. i18n: ectx: label, entry (ShadeTimeBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:24
#, kde-format
msgid "Is the time InfoBox in the \"shaded\" state?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShadeTimeBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:25
#, kde-format
msgid "If true, the Time InfoBox will show only its top line of data."
msgstr ""
#. i18n: ectx: label, entry (ShadeFocusBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:29
#, kde-format
msgid "Is the focus InfoBox in the \"shaded\" state?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShadeFocusBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:30
#, kde-format
msgid "If true, the Focus InfoBox will show only its top line of data."
msgstr ""
#. i18n: ectx: label, entry (ShadeGeoBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:34
#, kde-format
msgid "Is the geographic InfoBox in the \"shaded\" state?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShadeGeoBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:35
#, kde-format
msgid "If true, the Geographic Location InfoBox will show only its top line of data."
msgstr ""
#. i18n: ectx: label, entry (ShowInfoBoxes), group (GUI)
#. +> trunk5
#: kstars.kcfg:39
#, kde-format
msgid "Meta-option to toggle display of all InfoBoxes"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowInfoBoxes), group (GUI)
#. +> trunk5
#: kstars.kcfg:40
#, kde-format
msgid "Toggles display of all three InfoBoxes."
msgstr ""
#. i18n: ectx: label, entry (ShowTimeBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:44
#, kde-format
msgid "Display the time InfoBox?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowTimeBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:45
#, kde-format
msgid "Toggles display of the Time InfoBox."
msgstr ""
#. i18n: ectx: label, entry (ShowFocusBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:49
#, kde-format
msgid "Display the focus InfoBox?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowFocusBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:50
#, kde-format
msgid "Toggles display of the Focus InfoBox."
msgstr ""
#. i18n: ectx: label, entry (ShowGeoBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:54
#, kde-format
msgid "Display the geographic InfoBox?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowGeoBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:55
#, kde-format
msgid "Toggles display of the Geographic Location InfoBox."
msgstr ""
#. i18n: ectx: label, entry (StickyTimeBox), group (GUI)
#. i18n: ectx: label, entry (StickyFocusBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:59 kstars.kcfg:66
#, kde-format
msgid "Time InfoBox anchor flag"
msgstr ""
#. i18n: ectx: whatsthis, entry (StickyTimeBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:60
#, kde-format
msgid "Is the Time InfoBox anchored to a window edge? 0 = not anchored; 1 = anchored to right edge; 2 = anchored to bottom edge; 3 = anchored to bottom and right edges."
msgstr ""
#. i18n: ectx: whatsthis, entry (StickyFocusBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:67
#, kde-format
msgid "Is the Focus InfoBox anchored to a window edge? 0 = not anchored; 1 = anchored to right edge; 2 = anchored to bottom edge; 3 = anchored to bottom and right edges."
msgstr ""
#. i18n: ectx: label, entry (StickyGeoBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:73
#, kde-format
msgid "Geographic InfoBox anchor flag"
msgstr ""
#. i18n: ectx: whatsthis, entry (StickyGeoBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:74
#, kde-format
msgid "Is the Geographic Location InfoBox anchored to a window edge? 0 = not anchored; 1 = anchored to right edge; 2 = anchored to bottom edge; 3 = anchored to bottom and right edges."
msgstr ""
#. i18n: ectx: label, entry (ShowStatusBar), group (GUI)
#. +> trunk5
#: kstars.kcfg:80
#, kde-format
msgid "Display the statusbar?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowStatusBar), group (GUI)
#. +> trunk5
#: kstars.kcfg:81
#, kde-format
msgid "Toggle display of the status bar."
msgstr ""
#. i18n: ectx: label, entry (ShowAltAzField), group (GUI)
#. +> trunk5
#: kstars.kcfg:85
#, kde-format
msgid "Display Alt/Az coordinates in the statusbar?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowAltAzField), group (GUI)
#. +> trunk5
#: kstars.kcfg:86
#, kde-format
msgid "Toggle display of the Horizontal coordinates of the mouse cursor in the status bar."
msgstr ""
#. i18n: ectx: label, entry (ShowRADecField), group (GUI)
#. +> trunk5
#: kstars.kcfg:90
#, kde-format
msgid "Display RA/Dec coordinates in the statusbar?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowRADecField), group (GUI)
#. +> trunk5
#: kstars.kcfg:91
#, kde-format
msgid "Toggle display of the Equatorial coordinates of the mouse cursor at the current epoch in the status bar."
msgstr ""
#. i18n: ectx: label, entry (ShowJ2000RADecField), group (GUI)
#. +> trunk5
#: kstars.kcfg:95
#, kde-format
msgid "Display J2000.0 RA/Dec coordinates in the statusbar?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowJ2000RADecField), group (GUI)
#. +> trunk5
#: kstars.kcfg:96
#, kde-format
msgid "Toggle display of the Equatorial coordinates of the mouse cursor at the standard epoch in the status bar."
msgstr ""
#. i18n: ectx: label, entry (ShowSensorFOV), group (GUI)
#. +> trunk5
#: kstars.kcfg:100
#, kde-format
msgid "Display CCD sensor angular size on the sky map?"
msgstr ""
#. i18n: ectx: label, entry (WindowWidth), group (GUI)
#. +> trunk5
#: kstars.kcfg:104
#, kde-format
msgid "Width of main window, in pixels"
msgstr ""
#. i18n: ectx: label, entry (WindowHeight), group (GUI)
#. +> trunk5
#: kstars.kcfg:108
#, kde-format
msgid "Height of main window, in pixels"
msgstr ""
#. i18n: ectx: label, entry (RunStartupWizard), group (GUI)
#. +> trunk5
#: kstars.kcfg:112
#, kde-format
msgid "Run Startup Wizard when KStars launches?"
msgstr ""
#. i18n: ectx: label, entry (CurrentTheme), group (GUI)
#. +> trunk5
#: kstars.kcfg:116
#, kde-format
msgid "Current application theme"
msgstr ""
#. i18n: ectx: label, entry (CatalogFile), group (Catalogs)
#. +> trunk5
#: kstars.kcfg:123
#, kde-format
msgid "Filenames of defined custom object catalogs."
msgstr ""
#. i18n: ectx: whatsthis, entry (CatalogFile), group (Catalogs)
#. +> trunk5
#: kstars.kcfg:124
#, kde-format
msgid "List of the filenames of custom object catalogs."
msgstr ""
#. i18n: ectx: label, entry (ShowCatalog), group (Catalogs)
#. +> trunk5
#: kstars.kcfg:127
#, kde-format
msgid "List of toggles for displaying custom object catalogs."
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowCatalog), group (Catalogs)
#. +> trunk5
#: kstars.kcfg:128
#, kde-format
msgid "List of integers toggling display of each custom object catalog (any nonzero value indicates the objects in that catalog will be displayed)."
msgstr ""
#. i18n: ectx: label, entry (ShowCatalogNames), group (Catalogs)
#. +> trunk5
#: kstars.kcfg:131
#, kde-format
msgid "List for displaying custom object catalogs."
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowCatalogNames), group (Catalogs)
#. +> trunk5
#: kstars.kcfg:132
#, kde-format
msgid "List of names for which custom catalogs are to be displayed."
msgstr ""
#. i18n: ectx: label, entry (ResolveNamesOnline), group (Catalogs)
#. +> trunk5
#: kstars.kcfg:135
#, kde-format
msgid "Resolve names using online services."
msgstr ""
#. i18n: ectx: whatsthis, entry (ResolveNamesOnline), group (Catalogs)
#. +> trunk5
#: kstars.kcfg:136
#, kde-format
msgid "Names of objects entered into the find dialog are resolved using online services and stored in the database. This option also toggles the display of such resolved objects on the sky map."
msgstr ""
#. i18n: ectx: label, entry (INDIWindowWidth), group (indi)
#. +> trunk5
#: kstars.kcfg:143
#, kde-format
msgid "INDI window width"
msgstr ""
#. i18n: ectx: label, entry (INDIWindowHeight), group (indi)
#. +> trunk5
#: kstars.kcfg:147
#, kde-format
msgid "INDI window height"
msgstr ""
#. i18n: ectx: label, entry (useGeographicUpdate), group (indi)
#. i18n: ectx: label, entry (useTimeUpdate), group (indi)
#. +> trunk5
#: kstars.kcfg:155
#, kde-format
msgid "Automatically updates time and date?"
msgstr ""
#. i18n: ectx: label, entry (independentWindowINDI), group (indi)
#. +> trunk5
#: kstars.kcfg:159
#, kde-format
msgid "Make INDI Control Panel window independent of KStars main window"
msgstr ""
#. i18n: ectx: label, entry (showTargetCrosshair), group (indi)
#. +> trunk5
#: kstars.kcfg:163
#, kde-format
msgid "Draw crosshairs at telescope position in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (showTargetCrosshair), group (indi)
#. +> trunk5
#: kstars.kcfg:164
#, kde-format
msgid "Toggle display of crosshairs centered at telescope's pointed position in the KStars sky map."
msgstr ""
#. i18n: ectx: label, entry (showINDIMessages), group (indi)
#. +> trunk5
#: kstars.kcfg:168
#, kde-format
msgid "Display INDI messages in the statusbar?"
msgstr ""
#. i18n: ectx: whatsthis, entry (showINDIMessages), group (indi)
#. +> trunk5
#: kstars.kcfg:169
#, kde-format
msgid "Toggle display of INDI messages in the KStars statusbar."
msgstr ""
#. i18n: ectx: label, entry (messageNotificationINDI), group (indi)
#. +> trunk5
#: kstars.kcfg:173
#, kde-format
msgid "INDI message notifications"
msgstr ""
#. i18n: ectx: whatsthis, entry (messageNotificationINDI), group (indi)
#. +> trunk5
#: kstars.kcfg:174
#, kde-format
msgid "Show INDI messages as desktop notifications instead of dialogs."
msgstr ""
#. i18n: ectx: label, entry (useKStarsSource), group (indi)
#. +> trunk5
#: kstars.kcfg:178
#, kde-format
msgid "Use KStars time and location for synchronization?"
msgstr ""
#. i18n: ectx: label, entry (useMountSource), group (indi)
#. +> trunk5
#: kstars.kcfg:182
#, kde-format
msgid "Use mount time and location for synchronization?"
msgstr ""
#. i18n: ectx: label, entry (useGPSSource), group (indi)
#. +> trunk5
#: kstars.kcfg:186
#, kde-format
msgid "Use GPS time and location for synchronization?"
msgstr ""
#. i18n: ectx: label, entry (fitsDir), group (indi)
#. +> trunk5
#: kstars.kcfg:190
#, kde-format
msgid "FITS Default directory"
msgstr ""
#. i18n: ectx: whatsthis, entry (fitsDir), group (indi)
#. +> trunk5
#: kstars.kcfg:191
#, kde-format
msgid "The default location of saved FITS files"
msgstr ""
#. i18n: ectx: label, entry (serverPortStart), group (indi)
#. +> trunk5
#: kstars.kcfg:195
#, kde-format
msgid "INDI Server Start Port"
msgstr ""
#. i18n: ectx: whatsthis, entry (serverPortStart), group (indi)
#. +> trunk5
#: kstars.kcfg:196
#, kde-format
msgid "INDI server will attempt to bind with ports starting from this port"
msgstr ""
#. i18n: ectx: label, entry (serverPortEnd), group (indi)
#. +> trunk5
#: kstars.kcfg:200
#, kde-format
msgid "INDI Server Final Port"
msgstr ""
#. i18n: ectx: whatsthis, entry (serverPortEnd), group (indi)
#. +> trunk5
#: kstars.kcfg:201
#, kde-format
msgid "INDI server will attempt to bind with ports ending with this port"
msgstr ""
#. i18n: ectx: label, entry (filterAlias), group (indi)
#. +> trunk5
#: kstars.kcfg:205
#, kde-format
msgid "Aliases for filter wheel slots."
msgstr ""
#. i18n: ectx: whatsthis, entry (filterAlias), group (indi)
#. +> trunk5
#: kstars.kcfg:206
#, kde-format
msgid "List of the aliases for filter wheel slots."
msgstr ""
#. i18n: ectx: label, entry (indiServer), group (indi)
#. i18n: ectx: whatsthis, entry (indiServer), group (indi)
#. +> trunk5
#: kstars.kcfg:209 kstars.kcfg:210
#, kde-format
msgid "PATH to indiserver binary"
msgstr ""
#. i18n: ectx: label, entry (indiDriversDir), group (indi)
#. i18n: ectx: whatsthis, entry (indiDriversDir), group (indi)
#. +> trunk5
#: kstars.kcfg:218 kstars.kcfg:219
#, kde-format
msgid "PATH to indi drivers directory"
msgstr ""
#. i18n: ectx: label, entry (indiDriversAreInternal), group (indi)
#. i18n: ectx: label, entry (AstrometrySolverIsInternal), group (Align)
#. +> trunk5
#: kstars.kcfg:223 kstars.kcfg:1852
#, kde-format
msgid "Internal or External Astrometry Solver?"
msgstr ""
#. i18n: ectx: label, entry (streamWindowWidth), group (indi)
#. +> trunk5
#: kstars.kcfg:227
#, kde-format
msgid "Video streaming window width"
msgstr ""
#. i18n: ectx: label, entry (streamWindowHeight), group (indi)
#. +> trunk5
#: kstars.kcfg:231
#, kde-format
msgid "Video streaming window height"
msgstr ""
#. i18n: ectx: label, entry (INDIMountLogging), group (indi)
#. +> trunk5
#: kstars.kcfg:235
#, kde-format
msgid "Enable INDI Mount logging"
msgstr ""
#. i18n: ectx: label, entry (INDIFocuserLogging), group (indi)
#. +> trunk5
#: kstars.kcfg:239
#, kde-format
msgid "Enable INDI Focuser logging"
msgstr ""
#. i18n: ectx: label, entry (INDICCDLogging), group (indi)
#. +> trunk5
#: kstars.kcfg:243
#, kde-format
msgid "Enable INDI CCD logging"
msgstr ""
#. i18n: ectx: label, entry (INDIFilterWheelLogging), group (indi)
#. +> trunk5
#: kstars.kcfg:247
#, kde-format
msgid "Enable INDI Filter Wheel logging"
msgstr ""
#. i18n: ectx: label, entry (INDIDomeLogging), group (indi)
#. +> trunk5
#: kstars.kcfg:251
#, kde-format
msgid "Enable INDI Dome logging"
msgstr ""
#. i18n: ectx: label, entry (INDIDetectorLogging), group (indi)
#. +> trunk5
#: kstars.kcfg:255
#, kde-format
msgid "Enable INDI Detector logging"
msgstr ""
#. i18n: ectx: label, entry (INDIWeatherLogging), group (indi)
#. +> trunk5
#: kstars.kcfg:259
#, kde-format
msgid "Enable INDI Weather logging"
msgstr ""
#. i18n: ectx: label, entry (INDIAuxiliaryLogging), group (indi)
#. +> trunk5
#: kstars.kcfg:263
#, kde-format
msgid "Enable INDI Auxiliary logging"
msgstr ""
#. i18n: ectx: label, entry (INDIRotatorLogging), group (indi)
#. +> trunk5
#: kstars.kcfg:267
#, kde-format
msgid "Enable INDI Rotator logging"
msgstr ""
#. i18n: ectx: label, entry (INDIGPSLogging), group (indi)
#. +> trunk5
#: kstars.kcfg:271
#, kde-format
msgid "Enable INDI GPS logging"
msgstr ""
#. i18n: ectx: label, entry (INDIAOLogging), group (indi)
#. +> trunk5
#: kstars.kcfg:275
#, kde-format
msgid "Enable INDI Adaptive Optics logging"
msgstr ""
#. i18n: ectx: label, entry (CityName), group (Location)
#. +> trunk5
#: kstars.kcfg:282
#, kde-format
msgid "City name of geographic location."
msgstr ""
#. i18n: ectx: whatsthis, entry (CityName), group (Location)
#. +> trunk5
#: kstars.kcfg:283
#, kde-format
msgid "The City name of the current geographic location."
msgstr ""
#. i18n: ectx: label, entry (ProvinceName), group (Location)
#. +> trunk5
#: kstars.kcfg:287
#, kde-format
msgid "Province name of geographic location."
msgstr ""
#. i18n: ectx: whatsthis, entry (ProvinceName), group (Location)
#. +> trunk5
#: kstars.kcfg:288
#, kde-format
msgid "The Province name of the current geographic location. This is the name of the state for locations in the U. S."
msgstr ""
#. i18n: ectx: label, entry (CountryName), group (Location)
#. +> trunk5
#: kstars.kcfg:292
#, kde-format
msgid "Country name of geographic location."
msgstr ""
#. i18n: ectx: whatsthis, entry (CountryName), group (Location)
#. +> trunk5
#: kstars.kcfg:293
#, kde-format
msgid "The Country name of the current geographic location."
msgstr ""
#. i18n: ectx: label, entry (Longitude), group (Location)
#. +> trunk5
#: kstars.kcfg:297
#, kde-format
msgid "Geographic Longitude, in degrees."
msgstr ""
#. i18n: ectx: whatsthis, entry (Longitude), group (Location)
#. +> trunk5
#: kstars.kcfg:298
#, kde-format
msgid "The longitude of the current geographic location, in decimal degrees."
msgstr ""
#. i18n: ectx: label, entry (Latitude), group (Location)
#. +> trunk5
#: kstars.kcfg:302
#, kde-format
msgid "Geographic Latitude, in degrees."
msgstr ""
#. i18n: ectx: whatsthis, entry (Latitude), group (Location)
#. +> trunk5
#: kstars.kcfg:303
#, kde-format
msgid "The latitude of the current geographic location, in decimal degrees."
msgstr ""
#. i18n: ectx: label, entry (Elevation), group (Location)
#. +> trunk5
#: kstars.kcfg:307
#, kde-format
msgid "Elevation above sea level of geographic location, in meters."
msgstr ""
#. i18n: ectx: label, entry (TimeZone), group (Location)
#. +> trunk5
#: kstars.kcfg:311
#, kde-format
msgid "Time Zone offset of geographic location, in hours."
msgstr ""
#. i18n: ectx: label, entry (DST), group (Location)
#. +> trunk5
#: kstars.kcfg:315
#, kde-format
msgid "Two-letter code for daylight savings time rule used by geographic location."
msgstr ""
#. i18n: ectx: whatsthis, entry (DST), group (Location)
#. +> trunk5
#: kstars.kcfg:316
#, kde-format
msgid "Two-letter code that determines the dates on which daylight savings time begins and ends (you can view the rules by pressing the \"Explain DST Rules\" button in the Geographic Location window)."
msgstr ""
#. i18n: ectx: label, entry (UseAnimatedSlewing), group (View)
#. +> trunk5
#: kstars.kcfg:323
#, kde-format
msgid "Use animated slewing effects when changing focus position?"
msgstr ""
#. i18n: ectx: whatsthis, entry (UseAnimatedSlewing), group (View)
#. +> trunk5
#: kstars.kcfg:324
#, kde-format
msgid "If true, focus changes will cause the sky to visibly spin to the new position. Otherwise, the display will \"snap\" instantly to the new position."
msgstr ""
#. i18n: ectx: label, entry (FOVNames), group (View)
#. +> trunk5
#: kstars.kcfg:328
#, kde-format
msgid "Name of selected FOV indicators"
msgstr ""
#. i18n: ectx: whatsthis, entry (FOVNames), group (View)
#. +> trunk5
#: kstars.kcfg:329
#, kde-format
msgid "The names of the currently selected field-of-view indicators. The list of defined FOV indicator names is listed in the \"Settings|FOV Symbols\" menu."
msgstr ""
#. i18n: ectx: label, entry (FadePlanetTrails), group (View)
#. +> trunk5
#: kstars.kcfg:333
#, kde-format
msgid "Fade planet trails to background color?"
msgstr ""
#. i18n: ectx: whatsthis, entry (FadePlanetTrails), group (View)
#. +> trunk5
#: kstars.kcfg:334
#, kde-format
msgid "If true, trails attached to solar system bodies will fade into the background sky color."
msgstr ""
#. i18n: ectx: label, entry (FocusRA), group (View)
#. +> trunk5
#: kstars.kcfg:338
#, kde-format
msgid "Right Ascension of focus position"
msgstr ""
#. i18n: ectx: whatsthis, entry (FocusRA), group (View)
#. +> trunk5
#: kstars.kcfg:339
#, kde-format
msgid "The right ascension of the initial focus position of the sky map, in decimal hours. This value is volatile; it is reset whenever the program shuts down."
msgstr ""
#. i18n: ectx: label, entry (FocusDec), group (View)
#. +> trunk5
#: kstars.kcfg:343
#, kde-format
msgid "Declination of focus position"
msgstr ""
#. i18n: ectx: whatsthis, entry (FocusDec), group (View)
#. +> trunk5
#: kstars.kcfg:344
#, kde-format
msgid "The declination of the initial focus position of the sky map, in decimal degrees. This value is volatile; it is reset whenever the program shuts down."
msgstr ""
#. i18n: ectx: label, entry (FocusObject), group (View)
#. +> trunk5
#: kstars.kcfg:348
#, kde-format
msgid "Name of focused object"
msgstr ""
#. i18n: ectx: whatsthis, entry (FocusObject), group (View)
#. +> trunk5
#: kstars.kcfg:349
#, kde-format
msgid "The name of the object that should be centered and tracked on startup. If no object should be centered, set to \"nothing\". This value is volatile; it is reset whenever the program shuts down."
msgstr ""
#. i18n: ectx: label, entry (IsTracking), group (View)
#. +> trunk5
#: kstars.kcfg:353
#, kde-format
msgid "Is tracking engaged?"
msgstr ""
#. i18n: ectx: whatsthis, entry (IsTracking), group (View)
#. +> trunk5
#: kstars.kcfg:354
#, kde-format
msgid "True if the skymap should track on its initial position on startup. This value is volatile; it is reset whenever the program shuts down."
msgstr ""
#. i18n: ectx: label, entry (HideOnSlew), group (View)
#. +> trunk5
#: kstars.kcfg:358
#, kde-format
msgid "Hide objects while moving?"
msgstr ""
#. i18n: ectx: whatsthis, entry (HideOnSlew), group (View)
#. +> trunk5
#: kstars.kcfg:359
#, kde-format
msgid "Toggle whether KStars should hide some objects while the display is moving, for smoother motion."
msgstr ""
#. i18n: ectx: label, entry (HideCBounds), group (View)
#. +> trunk5
#: kstars.kcfg:363
#, kde-format
msgid "Hide constellation boundaries while moving?"
msgstr ""
#. i18n: ectx: whatsthis, entry (HideCBounds), group (View)
#. +> trunk5
#: kstars.kcfg:364
#, kde-format
msgid "Toggle whether constellation boundaries are hidden while the display is in motion."
msgstr ""
#. i18n: ectx: label, entry (HideCLines), group (View)
msgid "Draw grids according to active coordinate system?"
msgstr ""
#. i18n: ectx: whatsthis, entry (AutoSelectGrid), group (View)
#. +> trunk5
#: kstars.kcfg:519
#, kde-format
msgid "Coordinate grids will automatically change according to active coordinate system."
msgstr ""
#. i18n: ectx: label, entry (ShowEquatorialGrid), group (View)
#. +> trunk5
#: kstars.kcfg:523
#, kde-format
msgid "Draw equatorial coordinate grid in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowEquatorialGrid), group (View)
#. +> trunk5
#: kstars.kcfg:524
#, kde-format
msgid "Toggle whether the equatorial coordinate grid is drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowHorizontalGrid), group (View)
#. +> trunk5
#: kstars.kcfg:528
#, kde-format
msgid "Draw horizontal coordinate grid in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowHorizontalGrid), group (View)
#. +> trunk5
#: kstars.kcfg:529
#, kde-format
msgid "Toggle whether the horizontal coordinate grid is drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowLocalMeridian), group (View)
#. +> trunk5
#: kstars.kcfg:533
#, kde-format
msgid "Draw local meridian line in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowLocalMeridian), group (View)
#. +> trunk5
#: kstars.kcfg:534
#, kde-format
msgid "Toggle whether the local meridian line is drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowGround), group (View)
#. +> trunk5
#: kstars.kcfg:538
#, kde-format
msgid "Draw opaque ground in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowGround), group (View)
#. +> trunk5
#: kstars.kcfg:539
#, kde-format
msgid "Toggle whether the region below the horizon is opaque."
msgstr ""
#. i18n: ectx: label, entry (ShowHorizon), group (View)
#. +> trunk5
#: kstars.kcfg:543
#, kde-format
msgid "Draw horizon line in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowHorizon), group (View)
#. +> trunk5
#: kstars.kcfg:544
#, kde-format
msgid "Toggle whether the horizon line is drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowFlags), group (View)
#. +> trunk5
#: kstars.kcfg:548
#, kde-format
msgid "Draw flags in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowFlags), group (View)
#. +> trunk5
#: kstars.kcfg:549
#, kde-format
msgid "Toggle whether flags are drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowIC), group (View)
#. +> trunk5
#: kstars.kcfg:553
#, kde-format
msgid "Draw IC objects in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowIC), group (View)
#. +> trunk5
#: kstars.kcfg:554
#, kde-format
msgid "Toggle whether IC objects are drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowNGC), group (View)
#. +> trunk5
#: kstars.kcfg:558
#, kde-format
msgid "Draw NGC objects in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowNGC), group (View)
#. +> trunk5
#: kstars.kcfg:559
#, kde-format
msgid "Toggle whether NGC objects are drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowMessier), group (View)
#. +> trunk5
#: kstars.kcfg:563
#, kde-format
msgid "Draw Messier objects in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowMessier), group (View)
#. +> trunk5
#: kstars.kcfg:564
#, kde-format
msgid "Toggle whether Messier objects are drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowMessierImages), group (View)
#. +> trunk5
#: kstars.kcfg:568
#, kde-format
msgid "Draw Messier object images in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowMessierImages), group (View)
#. +> trunk5
#: kstars.kcfg:569
#, kde-format
msgid "Toggle whether Messier objects are rendered as images in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowOther), group (View)
#. +> trunk5
#: kstars.kcfg:573
#, kde-format
msgid "Draw extra deep-sky objects in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowOther), group (View)
#. +> trunk5
#: kstars.kcfg:574
#, kde-format
msgid "Toggle whether extra objects are drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowMilkyWay), group (View)
#. +> trunk5
#: kstars.kcfg:578
#, kde-format
msgid "Draw Milky Way contour in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowMilkyWay), group (View)
#. +> trunk5
#: kstars.kcfg:579
#, kde-format
msgid "Toggle whether the Milky Way contour is drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (FillMilkyWay), group (View)
#. +> trunk5
#: kstars.kcfg:583
#, kde-format
msgid "Fill Milky Way contour? (false means use outline only)"
msgstr ""
#. i18n: ectx: whatsthis, entry (FillMilkyWay), group (View)
#. +> trunk5
#: kstars.kcfg:584
#, kde-format
msgid "Toggle whether the Milky Way contour is filled. When this option is false, the Milky Way is shown as an outline."
msgstr ""
#. i18n: ectx: label, entry (ShowSolarSystem), group (View)
#. +> trunk5
#: kstars.kcfg:588
#, kde-format
msgid "Meta-option for all planets in the sky map."
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowSolarSystem), group (View)
#. +> trunk5
#: kstars.kcfg:589
#, kde-format
msgid "Meta-option to control whether all major planets (and the Sun and Moon) are drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowPlanetImages), group (View)
#. +> trunk5
#: kstars.kcfg:593
#, kde-format
msgid "Draw planets as images in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowPlanetImages), group (View)
#. +> trunk5
#: kstars.kcfg:594
#, kde-format
msgid "Toggle whether major planets (and the Sun and Moon) are rendered as images in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowPlanetNames), group (View)
#. +> trunk5
#: kstars.kcfg:598
#, kde-format
msgid "Label planet names in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowPlanetNames), group (View)
#. +> trunk5
#: kstars.kcfg:599
#, kde-format
msgid "Toggle whether major planets (and the Sun and Moon) are labeled in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowSun), group (View)
#. +> trunk5
#: kstars.kcfg:603
#, kde-format
msgid "Draw Sun in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowSun), group (View)
#. +> trunk5
#: kstars.kcfg:604
#, kde-format
msgid "Toggle whether the Sun is drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowMoon), group (View)
#. +> trunk5
#: kstars.kcfg:608
#, kde-format
msgid "Draw Moon in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowMoon), group (View)
#. +> trunk5
#: kstars.kcfg:609
#, kde-format
msgid "Toggle whether the Moon is drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowMercury), group (View)
#. +> trunk5
#: kstars.kcfg:613
#, kde-format
msgid "Draw Mercury in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowMercury), group (View)
#. +> trunk5
#: kstars.kcfg:614
#, kde-format
msgid "Toggle whether Mercury is drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowVenus), group (View)
#. +> trunk5
#: kstars.kcfg:618
#, kde-format
msgid "Draw Venus in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowVenus), group (View)
#. +> trunk5
#: kstars.kcfg:619
#, kde-format
msgid "Toggle whether Venus is drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowMars), group (View)
#. +> trunk5
#: kstars.kcfg:623
#, kde-format
msgid "Draw Mars in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowMars), group (View)
#. +> trunk5
#: kstars.kcfg:624
#, kde-format
msgid "Toggle whether Mars is drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowJupiter), group (View)
#. +> trunk5
#: kstars.kcfg:628
#, kde-format
msgid "Draw Jupiter in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowJupiter), group (View)
#. +> trunk5
#: kstars.kcfg:629
#, kde-format
msgid "Toggle whether Jupiter is drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowSaturn), group (View)
#. +> trunk5
#: kstars.kcfg:633
#, kde-format
msgid "Draw Saturn in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowSaturn), group (View)
#. +> trunk5
#: kstars.kcfg:634
#, kde-format
msgid "Toggle whether Saturn is drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowUranus), group (View)
#. +> trunk5
#: kstars.kcfg:638
#, kde-format
msgid "Draw Uranus in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowUranus), group (View)
#. +> trunk5
#: kstars.kcfg:639
#, kde-format
msgid "Toggle whether Uranus is drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowNeptune), group (View)
#. +> trunk5
#: kstars.kcfg:643
#, kde-format
msgid "Draw Neptune in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowNeptune), group (View)
#. +> trunk5
#: kstars.kcfg:644
#, kde-format
msgid "Toggle whether Neptune is drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowPluto), group (View)
#. +> trunk5
#: kstars.kcfg:648
#, kde-format
msgid "Draw Pluto in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowPluto), group (View)
#. +> trunk5
#: kstars.kcfg:649
#, kde-format
msgid "Toggle whether Pluto is drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowStars), group (View)
#. +> trunk5
#: kstars.kcfg:653
#, kde-format
msgid "Draw stars in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowStars), group (View)
#. +> trunk5
#: kstars.kcfg:654
#, kde-format
msgid "Toggle whether stars are drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowStarMagnitudes), group (View)
#. +> trunk5
#: kstars.kcfg:658
#, kde-format
msgid "Label star magnitudes in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowStarMagnitudes), group (View)
#. +> trunk5
#: kstars.kcfg:659
#, kde-format
msgid "Toggle whether star magnitude (brightness) labels are shown in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowStarNames), group (View)
#. +> trunk5
#: kstars.kcfg:663
#, kde-format
msgid "Label star names in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowStarNames), group (View)
#. +> trunk5
#: kstars.kcfg:664
#, kde-format
msgid "Toggle whether star name labels are shown in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowDeepSkyMagnitudes), group (View)
#. +> trunk5
#: kstars.kcfg:668
#, kde-format
msgid "Label deep-sky object magnitudes in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowDeepSkyMagnitudes), group (View)
#. +> trunk5
#: kstars.kcfg:669
#, kde-format
msgid "Toggle whether deep-sky object magnitude (brightness) labels are shown in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowDeepSkyNames), group (View)
#. +> trunk5
#: kstars.kcfg:673
#, kde-format
msgid "Label deep-sky objects in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowDeepSkyNames), group (View)
#. +> trunk5
#: kstars.kcfg:674
#, kde-format
msgid "Toggle whether deep-sky object name labels are shown in the sky map."
msgstr ""
#. i18n: ectx: label, entry (SlewTimeScale), group (View)
#. +> trunk5
#: kstars.kcfg:678
#, kde-format
msgid "Minimum timescale for forced-slewing mode"
msgstr ""
#. i18n: ectx: whatsthis, entry (SlewTimeScale), group (View)
#. +> trunk5
#: kstars.kcfg:679
#, kde-format
msgid "The timescale above which slewing mode is forced on at all times."
msgstr ""
#. i18n: ectx: label, entry (BoxBGMode), group (View)
#. +> trunk5
#: kstars.kcfg:683
#, kde-format
msgid "InfoBoxes Background fill mode"
msgstr ""
#. i18n: ectx: whatsthis, entry (BoxBGMode), group (View)
#. +> trunk5
#: kstars.kcfg:684
#, kde-format
msgid "The background fill mode for the on-screen information boxes: 0=\"no BG\"; 1=\"semi-transparent BG\"; 2=\"opaque BG\""
msgstr ""
#. i18n: ectx: label, entry (Projection), group (View)
#. +> trunk5
#: kstars.kcfg:688
#, kde-format
msgid "Mapping projection algorithm"
msgstr ""
#. i18n: ectx: whatsthis, entry (Projection), group (View)
#. +> trunk5
#: kstars.kcfg:689
#, kde-format
msgid "Algorithm for the mapping projection."
msgstr ""
#. i18n: ectx: label, entry (UseAbbrevConstellNames), group (View)
#. +> trunk5
#: kstars.kcfg:693
#, kde-format
msgid "Use abbreviated constellation names?"
msgstr ""
#. i18n: ectx: whatsthis, entry (UseAbbrevConstellNames), group (View)
#. +> trunk5
#: kstars.kcfg:694
#, kde-format
msgid "Use official IAU abbreviations for constellation names."
msgstr ""
#. i18n: ectx: label, entry (UseLatinConstellNames), group (View)
#. +> trunk5
#: kstars.kcfg:698
#, kde-format
msgid "Use Latin constellation names?"
msgstr ""
#. i18n: ectx: whatsthis, entry (UseLatinConstellNames), group (View)
#. +> trunk5
#: kstars.kcfg:699
#, kde-format
msgid "Use Latin constellation names."
msgstr ""
#. i18n: ectx: label, entry (UseLocalConstellNames), group (View)
#. +> trunk5
#: kstars.kcfg:703
#, kde-format
msgid "Use localized constellation names?"
msgstr ""
#. i18n: ectx: whatsthis, entry (UseLocalConstellNames), group (View)
#. +> trunk5
#: kstars.kcfg:704
#, kde-format
msgid "Use localized constellation names (if localized names are not available, default to Latin names)."
msgstr ""
#. i18n: ectx: label, entry (UseAltAz), group (View)
#. +> trunk5
#: kstars.kcfg:708
#, kde-format
msgid "Use horizontal coordinate system?"
msgstr ""
#. i18n: ectx: whatsthis, entry (UseAltAz), group (View)
#. +> trunk5
#: kstars.kcfg:709
#, kde-format
msgid "Display the sky with horizontal coordinates (when false, equatorial coordinates will be used)."
msgstr ""
#. i18n: ectx: label, entry (UseAutoLabel), group (View)
#. +> trunk5
#: kstars.kcfg:713
#, kde-format
msgid "Automatically label focused object?"
msgstr ""
#. i18n: ectx: whatsthis, entry (UseAutoLabel), group (View)
#. +> trunk5
#: kstars.kcfg:714
#, kde-format
msgid "Toggle whether a centered object automatically gets a name label attached."
msgstr ""
#. i18n: ectx: label, entry (UseAutoTrail), group (View)
#. +> trunk5
#: kstars.kcfg:718 tools/scriptbuilder.cpp:696
#, kde-format
msgid "Automatically add trail to centered solar system body?"
msgstr ""
#. i18n: ectx: whatsthis, entry (UseAutoTrail), group (View)
#. +> trunk5
#: kstars.kcfg:719
#, kde-format
msgid "Toggle whether a centered solar system object automatically gets a trail attached, as long as it remains centered."
msgstr ""
#. i18n: ectx: label, entry (UseHoverLabel), group (View)
#. +> trunk5
#: kstars.kcfg:723
#, kde-format
msgid "Add temporary label on mouse hover?"
msgstr ""
#. i18n: ectx: whatsthis, entry (UseHoverLabel), group (View)
#. +> trunk5
#: kstars.kcfg:724
#, kde-format
msgid "Toggle whether the object under the mouse cursor gets a transient name label."
msgstr ""
#. i18n: ectx: label, entry (UseRefraction), group (View)
#. +> trunk5
#: kstars.kcfg:728
#, kde-format
msgid "Correct positions for atmospheric refraction?"
msgstr ""
#. i18n: ectx: whatsthis, entry (UseRefraction), group (View)
#. +> trunk5
#: kstars.kcfg:729
#, kde-format
msgid "Toggle whether object positions are corrected for the effects of atmospheric refraction (only applies when horizontal coordinates are used)."
msgstr ""
#. i18n: ectx: label, entry (UseRelativistic), group (View)
#. +> trunk5
#: kstars.kcfg:733
#, kde-format
msgid "Apply relativistic corrections due to the bending of light in sun's gravitational field"
msgstr ""
#. i18n: ectx: whatsthis, entry (UseRelativistic), group (View)
#. +> trunk5
#: kstars.kcfg:734
#, kde-format
msgid "Toggle whether corrections due to bending of light around the sun are taken into account"
msgstr ""
#. i18n: ectx: label, entry (UseAntialias), group (View)
#. +> trunk5
#: kstars.kcfg:738
#, kde-format
msgid "Use antialiasing when drawing the screen?"
msgstr ""
#. i18n: ectx: whatsthis, entry (UseAntialias), group (View)
#. +> trunk5
#: kstars.kcfg:739
#, kde-format
msgid "Toggle whether the sky is rendered using antialiasing. Lines and shapes are smoother with antialiasing, but rendering the screen will take more time."
msgstr ""
#. i18n: ectx: label, entry (ZoomFactor), group (View)
#. +> trunk5
#: kstars.kcfg:743
#, kde-format
msgid "Zoom Factor, in pixels per radian"
msgstr ""
#. i18n: ectx: whatsthis, entry (ZoomFactor), group (View)
#. +> trunk5
#: kstars.kcfg:744
#, kde-format
msgid "The zoom level, measured in pixels per radian."
msgstr ""
#. i18n: ectx: label, entry (ZoomScrollFactor), group (View)
#. +> trunk5
#: kstars.kcfg:750
#, kde-format
msgid "Zoom scroll sensitivity."
msgstr ""
#. i18n: ectx: whatsthis, entry (ZoomScrollFactor), group (View)
#. +> trunk5
#: kstars.kcfg:751
#, kde-format
msgid "When zooming in or out, change zoom speed factor by this multiplier."
msgstr ""
#. i18n: ectx: label, entry (MagLimitAsteroid), group (View)
#. +> trunk5
#: kstars.kcfg:757
#, kde-format
msgid "Faint limit for asteroids"
msgstr ""
#. i18n: ectx: whatsthis, entry (MagLimitAsteroid), group (View)
#. +> trunk5
#: kstars.kcfg:758
#, kde-format
msgid "The faint magnitude limit for drawing asteroids."
msgstr ""
#. i18n: ectx: label, entry (MagLimitAsteroidDownload), group (View)
#. +> trunk5
#: kstars.kcfg:762
#, kde-format
msgid "Maximum magnitude for asteroids to be downloaded from JPL."
msgstr ""
#. i18n: ectx: whatsthis, entry (MagLimitAsteroidDownload), group (View)
#. +> trunk5
#: kstars.kcfg:763
#, kde-format
msgid "The maximum magnitude (visibility) to filter the asteroid data download from JPL."
msgstr ""
#. i18n: ectx: label, entry (AsteroidLabelDensity), group (View)
#. +> trunk5
#: kstars.kcfg:767
#, kde-format
msgid "Label density for asteroid names"
msgstr ""
#. i18n: ectx: whatsthis, entry (AsteroidLabelDensity), group (View)
#. +> trunk5
#: kstars.kcfg:768
#, kde-format
msgid "Controls the relative number of asteroid name labels drawn in the map."
msgstr ""
#. i18n: ectx: label, entry (MagLimitDrawDeepSky), group (View)
#. +> trunk5
#: kstars.kcfg:772
#, kde-format
msgid "Faint limit for deep-sky objects"
msgstr ""
#. i18n: ectx: whatsthis, entry (MagLimitDrawDeepSky), group (View)
#. +> trunk5
#: kstars.kcfg:773
#, kde-format
msgid "The faint magnitude limit for drawing deep-sky objects, when fully zoomed in."
msgstr ""
#. i18n: ectx: label, entry (MagLimitDrawDeepSkyZoomOut), group (View)
#. +> trunk5
#: kstars.kcfg:777
#, kde-format
msgid "Faint limit for deep-sky objects when zoomed out"
msgstr ""
#. i18n: ectx: whatsthis, entry (MagLimitDrawDeepSkyZoomOut), group (View)
#. +> trunk5
#: kstars.kcfg:778
#, kde-format
msgid "The faint magnitude limit for drawing deep-sky objects, when fully zoomed out."
msgstr ""
#. i18n: ectx: label, entry (ShowUnknownMagObjects), group (View)
#. +> trunk5
#: kstars.kcfg:782
#, kde-format
msgid "Show deep-sky objects of unknown magnitude"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowUnknownMagObjects), group (View)
#. +> trunk5
#: kstars.kcfg:783
#, kde-format
msgid "When enabled, objects whose magnitudes are unknown, or not available to KStars, are drawn irrespective of the faint limits set."
msgstr ""
#. i18n: ectx: label, entry (MagLimitDrawStar), group (View)
#. +> trunk5
#: kstars.kcfg:788
#, kde-format
msgid "Faint limit for stars"
msgstr ""
#. i18n: ectx: whatsthis, entry (MagLimitDrawStar), group (View)
#. +> trunk5
#: kstars.kcfg:789
#, kde-format
msgid "The faint magnitude limit for drawing stars, when fully zoomed in."
msgstr ""
#. i18n: ectx: label, entry (StarDensity), group (View)
#. +> trunk5
#: kstars.kcfg:793
#, kde-format
msgid "Density of stars in the field of view"
msgstr ""
#. i18n: ectx: whatsthis, entry (StarDensity), group (View)
#. +> trunk5
#: kstars.kcfg:794
#, kde-format
msgid "Sets the density of stars in the field of view"
msgstr ""
#. i18n: ectx: label, entry (MagLimitDrawStarZoomOut), group (View)
#. +> trunk5
#: kstars.kcfg:799
#, kde-format
msgid "Faint limit for stars when zoomed out"
msgstr ""
#. i18n: ectx: whatsthis, entry (MagLimitDrawStarZoomOut), group (View)
#. +> trunk5
#: kstars.kcfg:800
#, kde-format
msgid "The faint magnitude limit for drawing stars, when fully zoomed out."
msgstr ""
#. i18n: ectx: label, entry (MagLimitHideStar), group (View)
#. +> trunk5
#: kstars.kcfg:805
#, kde-format
msgid "Faint limit for stars when slewing"
msgstr ""
#. i18n: ectx: whatsthis, entry (MagLimitHideStar), group (View)
#. +> trunk5
#: kstars.kcfg:806
#, kde-format
msgid "The faint magnitude limit for drawing stars, when the map is in motion (only applicable if faint stars are set to be hidden while the map is in motion)."
msgstr ""
#. i18n: ectx: label, entry (StarLabelDensity), group (View)
#. +> trunk5
#: kstars.kcfg:810
#, kde-format
msgid "Relative density for star name labels and/or magnitudes"
msgstr ""
#. i18n: ectx: whatsthis, entry (StarLabelDensity), group (View)
#. +> trunk5
#: kstars.kcfg:811
#, kde-format
msgid "The relative density for drawing star name and magnitude labels."
msgstr ""
#. i18n: ectx: label, entry (DeepSkyLabelDensity), group (View)
#. +> trunk5
#: kstars.kcfg:815
#, kde-format
msgid "Relative density for deep-sky object name labels and/or magnitudes"
msgstr ""
#. i18n: ectx: whatsthis, entry (DeepSkyLabelDensity), group (View)
#. +> trunk5
#: kstars.kcfg:816
#, kde-format
msgid "The relative density for drawing deep-sky object name and magnitude labels."
msgstr ""
#. i18n: ectx: label, entry (DeepSkyLongLabels), group (View)
#. +> trunk5
#: kstars.kcfg:820
#, kde-format
msgid "Show long names in deep-sky object name labels?"
msgstr ""
#. i18n: ectx: whatsthis, entry (DeepSkyLongLabels), group (View)
#. +> trunk5
#: kstars.kcfg:821
#, kde-format
msgid "If true, long names (common names) for deep-sky objects are shown in the labels."
msgstr ""
#. i18n: ectx: label, entry (MaxRadCometName), group (View)
#. +> trunk5
#: kstars.kcfg:825
#, kde-format
msgid "Maximum distance from Sun for labeling comets, in AU"
msgstr ""
#. i18n: ectx: whatsthis, entry (MaxRadCometName), group (View)
#. +> trunk5
#: kstars.kcfg:826
#, kde-format
msgid "The maximum solar distance for drawing comets."
msgstr ""
#. i18n: ectx: label, entry (UseGL), group (View)
#. +> trunk5
#: kstars.kcfg:830
#, kde-format
msgid "Switch to OpenGL backend"
msgstr ""
#. i18n: ectx: whatsthis, entry (UseGL), group (View)
#. i18n: ectx: label, entry (RunClock), group (View)
#. +> trunk5
#: kstars.kcfg:835
#, kde-format
msgid "Run clock"
msgstr ""
#. i18n: ectx: whatsthis, entry (RunClock), group (View)
#. +> trunk5
#: kstars.kcfg:836
#, kde-format
msgid "The state of the clock (running or not)"
msgstr ""
#. i18n: ectx: label, entry (ObsListSymbol), group (ObservingList)
#. +> trunk5
#: kstars.kcfg:842
#, kde-format
msgid "Use symbols to label observing list objects"
msgstr ""
#. i18n: ectx: whatsthis, entry (ObsListSymbol), group (ObservingList)
#. +> trunk5
#: kstars.kcfg:843
#, kde-format
msgid "Objects in the observing list will be highlighted with a symbol in the map."
msgstr ""
#. i18n: ectx: label, entry (ObsListText), group (ObservingList)
#. +> trunk5
#: kstars.kcfg:847
#, kde-format
msgid "Use text to label observing list objects"
msgstr ""
#. i18n: ectx: whatsthis, entry (ObsListText), group (ObservingList)
#. +> trunk5
#: kstars.kcfg:848
#, kde-format
msgid "Objects in the observing list will be highlighted with a colored name label in the map."
msgstr ""
#. i18n: ectx: label, entry (ObsListPreferDSS), group (ObservingList)
#. +> trunk5
#: kstars.kcfg:852
#, kde-format
msgid "Prefer Digitized Sky Survey imagery in the observing list"
msgstr ""
#. i18n: ectx: whatsthis, entry (ObsListPreferDSS), group (ObservingList)
#. +> trunk5
#: kstars.kcfg:853
#, kde-format
msgid "The observing list will prefer DSS imagery while downloading imagery."
msgstr ""
#. i18n: ectx: label, entry (ObsListPreferSDSS), group (ObservingList)
#. +> trunk5
#: kstars.kcfg:857
#, kde-format
msgid "Prefer Sloan Digital Sky Survey imagery in the observing list"
msgstr ""
#. i18n: ectx: whatsthis, entry (ObsListPreferSDSS), group (ObservingList)
#. +> trunk5
#: kstars.kcfg:858
#, kde-format
msgid "The observing list will prefer SDSS imagery while downloading imagery."
msgstr ""
#. i18n: ectx: label, entry (ObsListDemoteHole), group (ObservingList)
#. +> trunk5
#: kstars.kcfg:862
#, kde-format
msgid "While sorting by percentage altitude in the observing list, demote objects present in the Dobsonian hole"
msgstr ""
#. i18n: ectx: whatsthis, entry (ObsListDemoteHole), group (ObservingList)
#. +> trunk5
#: kstars.kcfg:863
#, kde-format
msgid "Check this if you use a large Dobsonian telescope. Sorting by percentage current altitude is an easy way of determining what objects are well-placed for observation. However, when using a large Dobsonian telescope, objects close to the zenith are hard to observe. Since tracking there corresponds to a rotation in azimuth, it is both counterintuitive and requires the observer to frequently move the ladder. The region around the zenith where this is particularly frustrating is called the Dobsonian hole. This checkbox makes the observing list consider objects present in the hole as unfit for observation."
msgstr ""
#. i18n: ectx: label, entry (ObsListHoleSize), group (ObservingList)
#. +> trunk5
#: kstars.kcfg:867
#, kde-format
msgid "This is the angular distance from the zenith, in degrees, below which you can easily point your telescope."
msgstr ""
#. i18n: ectx: whatsthis, entry (ObsListHoleSize), group (ObservingList)
#. +> trunk5
#: kstars.kcfg:868
#, kde-format
msgid "This specifies the angular radius of the Dobsonian hole, i.e. the region where a large Dobsonian telescope cannot be pointed easily."
msgstr ""
#. i18n: ectx: label, entry (ColorSchemeFile), group (Colors)
#. i18n: ectx: whatsthis, entry (ColorSchemeFile), group (Colors)
#. +> trunk5
#: kstars.kcfg:874 kstars.kcfg:875
#, kde-format
msgid "The name of the color scheme"
msgstr ""
#. i18n: ectx: label, entry (StarColorMode), group (Colors)
#. +> trunk5
#: kstars.kcfg:879
#, kde-format
msgid "Mode for rendering stars"
msgstr ""
#. i18n: ectx: whatsthis, entry (StarColorMode), group (Colors)
#. +> trunk5
#: kstars.kcfg:880
#, kde-format
msgid "The method for rendering stars: 0=\"realistic colors\"; 1=\"solid red\"; 2=\"solid black\"; 3=\"solid white\"; 4=\"solid real colors\""
msgstr ""
#. i18n: ectx: label, entry (StarColorIntensity), group (Colors)
#. +> trunk5
#: kstars.kcfg:885
#, kde-format
msgid "Saturation level of star colors"
msgstr ""
#. i18n: ectx: whatsthis, entry (StarColorIntensity), group (Colors)
#. +> trunk5
#: kstars.kcfg:886
#, kde-format
msgid "The color saturation level of stars (only applicable when using \"realistic colors\" mode)."
msgstr ""
#. i18n: ectx: label, entry (AngularRulerColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:891
#, kde-format
msgid "Color of angular distance ruler"
msgstr ""
#. i18n: ectx: whatsthis, entry (AngularRulerColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:892
#, kde-format
msgid "The color for the angular-distance measurement ruler."
msgstr ""
#. i18n: ectx: label, entry (BoxBGColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:896
#, kde-format
msgid "Background color of InfoBoxes"
msgstr ""
#. i18n: ectx: whatsthis, entry (BoxBGColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:897
#, kde-format
msgid "The background color of the on-screen information boxes."
msgstr ""
#. i18n: ectx: label, entry (BoxGrabColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:901
#, kde-format
msgid "Text color of InfoBoxes when grabbed with mouse"
msgstr ""
#. i18n: ectx: whatsthis, entry (BoxGrabColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:902
#, kde-format
msgid "The text color for the on-screen information boxes, when activated by a mouse click."
msgstr ""
#. i18n: ectx: label, entry (BoxTextColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:906
#, kde-format
msgid "Text color of InfoBoxes"
msgstr ""
#. i18n: ectx: whatsthis, entry (BoxTextColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:907
#, kde-format
msgid "The normal text color of the on-screen information boxes."
msgstr ""
#. i18n: ectx: label, entry (CBoundColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:911
#, kde-format
msgid "Color of constellation boundaries"
msgstr ""
#. i18n: ectx: whatsthis, entry (CBoundColor), group (Colors)
#. i18n: ectx: whatsthis, entry (CBoundHighColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:912 kstars.kcfg:917
#, kde-format
msgid "The color for the constellation boundary lines."
msgstr ""
#. i18n: ectx: label, entry (CBoundHighColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:916
#, kde-format
msgid "Color of highlighted constellation boundary"
msgstr ""
#. i18n: ectx: label, entry (CLineColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:921
#, kde-format
msgid "Color of constellation lines"
msgstr ""
#. i18n: ectx: whatsthis, entry (CLineColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:922
#, kde-format
msgid "The color for the constellation figure lines."
msgstr ""
#. i18n: ectx: label, entry (CNameColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:926
#, kde-format
msgid "Color of constellation names"
msgstr ""
#. i18n: ectx: whatsthis, entry (CNameColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:927
#, kde-format
msgid "The color for the constellation names."
msgstr ""
#. i18n: ectx: label, entry (CompassColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:931
#, kde-format
msgid "Color of cardinal compass labels along horizon"
msgstr ""
#. i18n: ectx: whatsthis, entry (CompassColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:932
#, kde-format
msgid "The color for the cardinal compass point labels."
msgstr ""
#. i18n: ectx: label, entry (EclipticColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:936
#, kde-format
msgid "Color of ecliptic line"
msgstr ""
#. i18n: ectx: whatsthis, entry (EclipticColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:937
#, kde-format
msgid "The color for the ecliptic line."
msgstr ""
#. i18n: ectx: label, entry (EquatorColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:941
#, kde-format
msgid "Color of equator line"
msgstr ""
#. i18n: ectx: whatsthis, entry (EquatorColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:942
#, kde-format
msgid "The color for the equator line."
msgstr ""
#. i18n: ectx: label, entry (EquatorialGridColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:946
#, kde-format
msgid "Color of equatorial coordinate grid lines"
msgstr ""
#. i18n: ectx: whatsthis, entry (EquatorialGridColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:947
#, kde-format
msgid "The color for the equatorial coordinate grid lines."
msgstr ""
#. i18n: ectx: label, entry (HorizontalGridColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:951
#, kde-format
msgid "Color of horizontal coordinate grid lines"
msgstr ""
#. i18n: ectx: whatsthis, entry (HorizontalGridColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:952
#, kde-format
msgid "The color for the horizontal coordinate grid lines."
msgstr ""
#. i18n: ectx: label, entry (SpecialObjectColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:956
#, kde-format
msgid "Color of objects with extra links available"
msgstr ""
#. i18n: ectx: whatsthis, entry (SpecialObjectColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:957
#, kde-format
msgid "The color for objects which have extra URL links available."
msgstr ""
#. i18n: ectx: label, entry (HorizonColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:961
#, kde-format
msgid "Color of horizon line"
msgstr ""
#. i18n: ectx: whatsthis, entry (HorizonColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:962
#, kde-format
msgid "The color for the horizon line and opaque ground."
msgstr ""
#. i18n: ectx: label, entry (LocalMeridianColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:966
#, kde-format
msgid "Color of local meridian line"
msgstr ""
#. i18n: ectx: whatsthis, entry (LocalMeridianColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:967
#, kde-format
msgid "The color for the local meridian line."
msgstr ""
#. i18n: ectx: label, entry (MessierColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:971
#, kde-format
msgid "Color of Messier objects"
msgstr ""
#. i18n: ectx: whatsthis, entry (MessierColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:972
#, kde-format
msgid "The color for Messier object symbols."
msgstr ""
#. i18n: ectx: label, entry (NGCColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:976
#, kde-format
msgid "Color of NGC objects"
msgstr ""
#. i18n: ectx: whatsthis, entry (NGCColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:977
#, kde-format
msgid "The color for NGC object symbols."
msgstr ""
#. i18n: ectx: label, entry (ICColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:981
#, kde-format
msgid "Color of IC objects"
msgstr ""
#. i18n: ectx: whatsthis, entry (ICColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:982
#, kde-format
msgid "The color for IC object symbols."
msgstr ""
#. i18n: ectx: label, entry (MilkyWayWColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:986
#, kde-format
msgid "Color of Milky Way contour"
msgstr ""
#. i18n: ectx: whatsthis, entry (MilkyWayWColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:987
#, kde-format
msgid "The color for the Milky Way contour."
msgstr ""
#. i18n: ectx: label, entry (StarNameColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:991
#, kde-format
msgid "Color of star name labels"
msgstr ""
#. i18n: ectx: whatsthis, entry (StarNameColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:992
#, kde-format
msgid "The color for star name labels."
msgstr ""
#. i18n: ectx: label, entry (DeepSkyNameColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:996
#, kde-format
msgid "Color of deep-sky object name labels"
msgstr ""
#. i18n: ectx: whatsthis, entry (DeepSkyNameColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:997
#, kde-format
msgid "The color for deep-sky object name labels."
msgstr ""
#. i18n: ectx: label, entry (PlanetNameColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1001
#, kde-format
msgid "Color of planet name labels"
msgstr ""
#. i18n: ectx: whatsthis, entry (PlanetNameColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1002
#, kde-format
msgid "The color for solar system object labels."
msgstr ""
#. i18n: ectx: label, entry (PlanetTrailColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1006
#, kde-format
msgid "Color of planet trails"
msgstr ""
#. i18n: ectx: whatsthis, entry (PlanetTrailColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1007
#, kde-format
msgid "The color for solar system object trails."
msgstr ""
#. i18n: ectx: label, entry (SkyColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1011
#, kde-format
msgid "Color of sky"
msgstr ""
#. i18n: ectx: whatsthis, entry (SkyColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1012
#, kde-format
msgid "The color for the sky background."
msgstr ""
#. i18n: ectx: label, entry (ArtificialHorizonColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1016
#, kde-format
msgid "Color Artificial Horizon"
msgstr ""
#. i18n: ectx: whatsthis, entry (ArtificialHorizonColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1017
#, kde-format
msgid "The color for the artificial horizon region."
msgstr ""
#. i18n: ectx: label, entry (TelescopeTargetColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1021
#, kde-format
msgid "Color of telescope symbols"
msgstr ""
#. i18n: ectx: whatsthis, entry (TelescopeTargetColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1022
#, kde-format
msgid "The color for telescope target symbols."
msgstr ""
#. i18n: ectx: label, entry (VisibleSatColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1026
#, kde-format
msgid "Color of visible satellites"
msgstr ""
#. i18n: ectx: whatsthis, entry (VisibleSatColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1027
#, kde-format
msgid "Color of visible satellites."
msgstr ""
#. i18n: ectx: label, entry (SatColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1031
#, kde-format
msgid "Color of invisible satellites"
msgstr ""
#. i18n: ectx: whatsthis, entry (SatColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1032
#, kde-format
msgid "Color of invisible satellites."
msgstr ""
#. i18n: ectx: label, entry (SatLabelColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1036
#, kde-format
msgid "Color of satellites labels"
msgstr ""
#. i18n: ectx: whatsthis, entry (SatLabelColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1037
#, kde-format
msgid "Color of satellites labels."
msgstr ""
#. i18n: ectx: label, entry (SupernovaColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1041
#, kde-format
msgid "Color of supernovae"
msgstr ""
#. i18n: ectx: whatsthis, entry (SupernovaColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1042
#, kde-format
msgid "Color of supernova"
msgstr ""
#. i18n: ectx: label, entry (UserLabelColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1046
#, kde-format
msgid "Color of user-added labels"
msgstr ""
#. i18n: ectx: whatsthis, entry (UserLabelColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1047
#, kde-format
msgid "The color for user-added object labels."
msgstr ""
#. i18n: ectx: label, entry (RAGuideColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1051
#, kde-format
msgid "Color of RA Guide Error"
msgstr ""
#. i18n: ectx: whatsthis, entry (RAGuideColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1052
#, kde-format
msgid "The color for RA Guide Error bar in Ekos guide module."
msgstr ""
#. i18n: ectx: label, entry (DEGuideColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1056
#, kde-format
msgid "Color of DEC Guide Error"
msgstr ""
#. i18n: ectx: whatsthis, entry (DEGuideColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1057
#, kde-format
msgid "The color for DEC Guide Error bar in Ekos guide module."
msgstr ""
#. i18n: ectx: label, entry (SolverFOVColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1061
#, kde-format
msgid "Color of solver FOV box"
msgstr ""
#. i18n: ectx: whatsthis, entry (SolverFOVColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1062
#, kde-format
msgid "The color for solver FOV box in Ekos alignment module."
msgstr ""
#. i18n: ectx: label, entry (xplanetIsInternal), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1068 xplanet/opsxplanet.cpp:29
#, kde-format
msgid "Internal or External XPlanet?"
msgstr ""
#. i18n: ectx: label, entry (XplanetPath), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1072
#, kde-format
msgid "Path to xplanet binary"
msgstr ""
#. i18n: ectx: whatsthis, entry (XplanetPath), group (Xplanet)
#. i18n: ectx: whatsthis, entry (XplanetLabel), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1093
#, kde-format
msgid "If true, display a label in the upper right corner."
msgstr ""
#. i18n: ectx: label, entry (XplanetLabelLocalTime), group (Xplanet)
#. i18n: ectx: label, entry (XplanetLabelGMT), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1097 kstars.kcfg:1102
#, kde-format
msgid "Show GMT label"
msgstr ""
#. i18n: ectx: whatsthis, entry (XplanetLabelLocalTime), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1098
#, kde-format
msgid "Show local time."
msgstr ""
#. i18n: ectx: whatsthis, entry (XplanetLabelGMT), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1103
#, kde-format
msgid "Show GMT instead of local time."
msgstr ""
#. i18n: ectx: label, entry (XplanetLabelString), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1107
#, kde-format
msgid "Planet string"
msgstr ""
#. i18n: ectx: whatsthis, entry (XplanetLabelString), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1108
#, kde-format, no-c-format
msgid "Specify the text of the first line of the label. By default, it says something like \"Looking at Earth\". Any instances of %t will be replaced by the target name, and any instances of %o will be replaced by the origin name."
msgstr ""
#. i18n: ectx: label, entry (XplanetFontSize), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1112
#, kde-format
msgid "Font Size"
msgstr ""
#. i18n: ectx: whatsthis, entry (XplanetFontSize), group (Xplanet)
#. i18n: ectx: label, entry (XplanetDateFormat), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1122
#, kde-format
msgid "Date format"
msgstr ""
#. i18n: ectx: whatsthis, entry (XplanetDateFormat), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1123
#, kde-format, no-c-format
msgid "Specify the format for the date/time label. This format string is passed to strftime(3). The default is \"%c %Z\", which shows the date, time, and time zone in the locale’s appropriate date and time representation."
msgstr ""
#. i18n: ectx: label, entry (XplanetLabelTL), group (Xplanet)
#. i18n: ectx: whatsthis, entry (XplanetLongitude), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1164
#, kde-format
msgid "Place the observer above the specified longitude (in degrees). Longitude is positive going east, negative going west (for the earth and moon), so for example Los Angeles is at -118 or 242. The default value is 0."
msgstr ""
#. i18n: ectx: label, entry (XplanetProjection), group (Xplanet)
#. i18n: ectx: whatsthis, entry (XplanetBackground), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1184
#, kde-format
msgid "Use a file as the background image, with the planet to be superimposed upon it. This option is only meaningful with the -projection option. A color may also be supplied."
msgstr ""
#. i18n: ectx: label, entry (XplanetBackgroundImage), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1188
#, kde-format
msgid "Use background image"
msgstr ""
#. i18n: ectx: whatsthis, entry (XplanetBackgroundImage), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1189
#, kde-format
msgid "Use a file as the background image."
msgstr ""
#. i18n: ectx: label, entry (XplanetBackgroundImagePath), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1193
#, kde-format
msgid "Background image path"
msgstr ""
#. i18n: ectx: whatsthis, entry (XplanetBackgroundImagePath), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1194
#, kde-format
msgid "The path of the background image."
msgstr ""
#. i18n: ectx: label, entry (XplanetBackgroundColor), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1198
#, kde-format
msgid "Use background color"
msgstr ""
#. i18n: ectx: whatsthis, entry (XplanetBackgroundColor), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1199
#, kde-format
msgid "Use a color as the background."
msgstr ""
#. i18n: ectx: label, entry (XplanetBackgroundColorValue), group (Xplanet)
msgid "A star of the specified magnitude will have a pixel brightness of 1. The default value is 10. Stars will be drawn more brightly if this number is larger."
msgstr ""
#. i18n: ectx: label, entry (XplanetArcFile), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1213
#, kde-format
msgid "Arc file"
msgstr ""
#. i18n: ectx: whatsthis, entry (XplanetArcFile), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1214
#, kde-format
msgid "If checked, use an arc file to be plotted against the background stars."
msgstr ""
#. i18n: ectx: label, entry (XplanetArcFilePath), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1218
#, kde-format
msgid "Path to arc file"
msgstr ""
#. i18n: ectx: whatsthis, entry (XplanetArcFilePath), group (Xplanet)
#. i18n: ectx: whatsthis, entry (AlwaysRecomputeCoordinates), group (General)
#. +> trunk5
#: kstars.kcfg:1302
#, kde-format
msgid "Checking this option causes recomputation of current equatorial coordinates from catalog coordinates (i.e. application of precession, nutation and aberration corrections) for every redraw of the map. This makes processing slower when there are many stars to handle, but is more likely to be bug free. There are known bugs in the rendering of stars when this recomputation is avoided."
msgstr ""
#. i18n: ectx: label, entry (DefaultDSSImageSize), group (General)
#. +> trunk5
#: kstars.kcfg:1306
#, kde-format
msgid "Default size for DSS images"
msgstr ""
#. i18n: ectx: whatsthis, entry (DefaultDSSImageSize), group (General)
#. +> trunk5
#: kstars.kcfg:1307
#, kde-format
msgid "The default size for DSS images downloaded from the internet."
msgstr ""
#. i18n: ectx: label, entry (DSSPadding), group (General)
#. +> trunk5
#: kstars.kcfg:1311
#, kde-format
msgid "Additional padding around DSS Images of deep-sky objects"
msgstr ""
#. i18n: ectx: whatsthis, entry (DSSPadding), group (General)
#. +> trunk5
#: kstars.kcfg:1312
#, kde-format
msgid "To include parts of the star field, we add some extra padding around DSS images of deep-sky objects. This option configures the total (both sides) padding added to either dimension of the field."
msgstr ""
#. i18n: ectx: label, entry (VerboseLogging), group (General)
#. +> trunk5
#: kstars.kcfg:1316
#, kde-format
msgid "Enable Verbose Logging"
msgstr ""
#. i18n: ectx: whatsthis, entry (VerboseLogging), group (General)
#. +> trunk5
#: kstars.kcfg:1317
#, kde-format
msgid "Checking this option causes KStars to generate verbose debug information for diagnostic purposes. This may cause slowdown of KStars."
msgstr ""
#. i18n: ectx: label, entry (RegularLogging), group (General)
#. +> trunk5
#: kstars.kcfg:1321
#, kde-format
msgid "Enable Regular Logging"
msgstr ""
#. i18n: ectx: whatsthis, entry (RegularLogging), group (General)
#. +> trunk5
#: kstars.kcfg:1322
#, kde-format
msgid "Checking this option causes KStars to generate regular debug information."
msgstr ""
#. i18n: ectx: label, entry (DisableLogging), group (General)
#. +> trunk5
#: kstars.kcfg:1326
#, kde-format
msgid "Disable Verbose Logging"
msgstr ""
#. i18n: ectx: whatsthis, entry (DisableLogging), group (General)
#. +> trunk5
#: kstars.kcfg:1327
#, kde-format
msgid "Checking this option causes KStars to stop generating ANY debug information."
msgstr ""
#. i18n: ectx: label, entry (LogToDefault), group (General)
#. +> trunk5
#: kstars.kcfg:1331
#, kde-format
msgid "Log debug message to default output"
msgstr ""
#. i18n: ectx: whatsthis, entry (LogToDefault), group (General)
#. +> trunk5
#: kstars.kcfg:1332
#, kde-format
msgid "Checking this option causes KStars log debug messages to the default output used by the platform (e.g. Standard Error)."
msgstr ""
#. i18n: ectx: label, entry (LogToFile), group (General)
#. +> trunk5
#: kstars.kcfg:1336
#, kde-format
msgid "Log debug message to a log file"
msgstr ""
#. i18n: ectx: whatsthis, entry (LogToFile), group (General)
#. +> trunk5
#: kstars.kcfg:1337
#, kde-format
msgid "Checking this option causes KStars log debug messages to a log file as specified."
msgstr ""
#. i18n: ectx: whatsthis, entry (FITSLogging), group (General)
#. +> trunk5
#: kstars.kcfg:1341
#, kde-format
msgid "Log FITS Data activity."
msgstr ""
#. i18n: ectx: whatsthis, entry (INDILogging), group (General)
#. +> trunk5
#: kstars.kcfg:1345
#, kde-format
msgid "Log INDI devices activity."
msgstr ""
#. i18n: ectx: whatsthis, entry (CaptureLogging), group (General)
#. +> trunk5
#: kstars.kcfg:1349
#, kde-format
msgid "Log Ekos Capture Module activity."
msgstr ""
#. i18n: ectx: whatsthis, entry (FocusLogging), group (General)
#. +> trunk5
#: kstars.kcfg:1353
#, kde-format
msgid "Log Ekos Focus Module activity."
msgstr ""
#. i18n: ectx: whatsthis, entry (GuideLogging), group (General)
#. +> trunk5
#: kstars.kcfg:1357
#, kde-format
msgid "Log Ekos Guide Module activity."
msgstr ""
#. i18n: ectx: whatsthis, entry (AlignmentLogging), group (General)
#. +> trunk5
#: kstars.kcfg:1361
#, kde-format
msgid "Log Ekos Alignment Module activity."
msgstr ""
#. i18n: ectx: whatsthis, entry (MountLogging), group (General)
#. +> trunk5
#: kstars.kcfg:1365
#, kde-format
msgid "Log Ekos Mount Module activity."
msgstr ""
#. i18n: ectx: label, entry (useFITSViewer), group (FITSViewer)
#. +> trunk5
#: kstars.kcfg:1371
#, kde-format
msgid "Display every image captured in a FITS Viewer window."
msgstr ""
#. i18n: ectx: label, entry (singlePreviewFITS), group (FITSViewer)
#. +> trunk5
#: kstars.kcfg:1375
#, kde-format
msgid "Preview FITS in a single tab?"
msgstr ""
#. i18n: ectx: label, entry (singleWindowCapturedFITS), group (FITSViewer)
#. +> trunk5
#: kstars.kcfg:1380
#, kde-format
msgid "Display all captured FITS in one window?"
msgstr ""
#. i18n: ectx: whatsthis, entry (singleWindowCapturedFITS), group (FITSViewer)
#. +> trunk5
#: kstars.kcfg:1381
#, kde-format
msgid "Display all captured FITS images in a single FITS Viewer window. By default each camera create its own FITS Viewer instance"
msgstr ""
#. i18n: ectx: label, entry (singleWindowOpenedFITS), group (FITSViewer)
#. +> trunk5
#: kstars.kcfg:1385
#, kde-format
msgid "Display all opened FITS in one window?"
msgstr ""
#. i18n: ectx: whatsthis, entry (singleWindowOpenedFITS), group (FITSViewer)
#. +> trunk5
#: kstars.kcfg:1386
#, kde-format
msgid "Display all opened FITS images in a single FITS Viewer window."
msgstr ""
#. i18n: ectx: label, entry (independentWindowFITS), group (FITSViewer)
#. +> trunk5
#: kstars.kcfg:1390
#, kde-format
msgid "Make FITS Viewer window independent of KStars main window"
msgstr ""
#. i18n: ectx: label, entry (AutoDebayer), group (FITSViewer)
#. +> trunk5
#: kstars.kcfg:1394
#, kde-format
msgid "Automatically debayer a FITS image if it is contains a bayer pattern"
msgstr ""
#. i18n: ectx: label, entry (Auto3DCube), group (FITSViewer)
#. +> trunk5
#: kstars.kcfg:1398
#, kde-format
msgid "Process 3D FITS Cube (RGB). If false, only first channel is processed."
msgstr ""
#. i18n: ectx: label, entry (AutoWCS), group (FITSViewer)
#. +> trunk5
#: kstars.kcfg:1402
#, kde-format
msgid "Automatically process World-Coordinate-System (WCS) data when loading a FITS file."
msgstr ""
#. i18n: ectx: label, entry (LimitedResourcesMode), group (FITSViewer)
#. +> trunk5
#: kstars.kcfg:1406
#, kde-format
msgid "Conserve CPU and memory by disabling all resource-intensive features in FITS Viewer"
msgstr ""
#. i18n: ectx: label, entry (BortleClass), group (WISettings)
#. +> trunk5
#: kstars.kcfg:1412
#, kde-format
msgid "Bortle dark-sky rating"
msgstr ""
#. i18n: ectx: label, entry (TelescopeCheck), group (WISettings)
#. +> trunk5
#: kstars.kcfg:1416
#, kde-format
msgid "Availability of telescope"
msgstr ""
#. i18n: ectx: label, entry (BinocularsCheck), group (WISettings)
#. +> trunk5
#: kstars.kcfg:1420
#, kde-format
msgid "Availability of binoculars"
msgstr ""
#. i18n: ectx: label, entry (BinocularsAperture), group (WISettings)
#. +> trunk5
#: kstars.kcfg:1424
#, kde-format
msgid "Aperture of available binocular"
msgstr ""
#. i18n: ectx: label, entry (ScopeListIndex), group (WISettings)
#. +> trunk5
#: kstars.kcfg:1428
#, kde-format
msgid "Index of selected scope from list of scopes"
msgstr ""
#. i18n: ectx: label, entry (EkosWindowWidth), group (Ekos)
#. +> trunk5
#: kstars.kcfg:1434
#, kde-format
msgid "Ekos window width"
msgstr ""
#. i18n: ectx: label, entry (EkosWindowHeight), group (Ekos)
#. +> trunk5
#: kstars.kcfg:1438
#, kde-format
msgid "Ekos window height"
msgstr ""
#. i18n: ectx: label, entry (EkosLeftIcons), group (Ekos)
#. +> trunk5
#: kstars.kcfg:1446
#, kde-format
msgid "Ekos modules icons are placed to the left of pages"
msgstr ""
#. i18n: ectx: label, entry (independentWindowEkos), group (Ekos)
#. +> trunk5
#: kstars.kcfg:1450
#, kde-format
msgid "Make Ekos window independent of KStars main window"
msgstr ""
#. i18n: ectx: label, entry (profile), group (Ekos)
#. +> trunk5
#: kstars.kcfg:1454
#, kde-format
msgid "Ekos drivers profile"
msgstr ""
#. i18n: ectx: label, entry (neverLoadConfig), group (Ekos)
#. +> trunk5
#: kstars.kcfg:1458
#, kde-format
msgid "Never load device configuration?"
msgstr ""
#. i18n: ectx: label, entry (loadConfigOnConnection), group (Ekos)
#. +> trunk5
#: kstars.kcfg:1462
#, kde-format
msgid "Load device configuration upon successful connection?"
msgstr ""
#. i18n: ectx: label, entry (loadDefaultConfig), group (Ekos)
#. +> trunk5
#: kstars.kcfg:1466
#, kde-format
msgid "Always load device default configuration upon successful connection?"
msgstr ""
#. i18n: ectx: label, entry (shutterfulCCDs), group (DarkLibrary)
#. +> trunk5
#: kstars.kcfg:1476
#, kde-format
msgid "List of CCDs with mechanical or electronic shutters."
msgstr ""
#. i18n: ectx: label, entry (shutterlessCCDs), group (DarkLibrary)
#. +> trunk5
#: kstars.kcfg:1479
#, kde-format
msgid "List of CCDs without mechanical or electronic shutters."
msgstr ""
#. i18n: ectx: label, entry (MinimumAltLimit), group (Mount)
#. +> trunk5
#: kstars.kcfg:1484
#, kde-format
msgid "Default minimum mount altitude limit"
msgstr ""
#. i18n: ectx: label, entry (MaximumAltLimit), group (Mount)
#. +> trunk5
#: kstars.kcfg:1489
#, kde-format
msgid "Default maximum mount altitude limit."
msgstr ""
#. i18n: ectx: whatsthis, entry (MaximumAltLimit), group (Mount)
#. +> trunk5
#: kstars.kcfg:1490
#, kde-format
msgid "Maximum telescope altitude limit. If the telescope is above this limit, it will be commanded to stop."
msgstr ""
#. i18n: ectx: label, entry (EnableAltitudeLimits), group (Mount)
#. +> trunk5
#: kstars.kcfg:1494
#, kde-format
msgid "Enable mount altitude limits."
msgstr ""
#. i18n: ectx: label, entry (DefaultCaptureCCD), group (Capture)
#. +> trunk5
#: kstars.kcfg:1500
#, kde-format
msgid "Default capture module CCD."
msgstr ""
#. i18n: ectx: label, entry (DefaultObserver), group (Capture)
#. +> trunk5
#: kstars.kcfg:1503
#, kde-format
msgid "Default observer full name."
msgstr ""
#. i18n: ectx: label, entry (SyncFOVPA), group (Capture)
#. +> trunk5
#: kstars.kcfg:1506
#, kde-format
msgid "Sync FOV indicator Position Angle with Rotator Settings Position Angle"
msgstr ""
#. i18n: ectx: label, entry (PAMultiplier), group (Capture)
#. +> trunk5
#: kstars.kcfg:1510
#, kde-format
msgid "Position angle multiplier"
msgstr ""
#. i18n: ectx: label, entry (PAOffset), group (Capture)
#. +> trunk5
#: kstars.kcfg:1514
#, kde-format
msgid "Position angle offset"
msgstr ""
#. i18n: ectx: label, entry (GuideDeviation), group (Capture)
#. +> trunk5
#: kstars.kcfg:1518
#, kde-format
msgid "Default maximum permittable guide deviation"
msgstr ""
#. i18n: ectx: whatsthis, entry (GuideDeviation), group (Capture)
#. +> trunk5
#: kstars.kcfg:1519
#, kde-format
msgid "If guide deviation exceeds this limit, the exposure will be automatically aborted and only resumed when the deviation is within this limit."
msgstr ""
#. i18n: ectx: label, entry (HFRDeviation), group (Capture)
#. +> trunk5
#: kstars.kcfg:1523
#, kde-format
msgid "Default maximum permittable HFR deviation"
msgstr ""
#. i18n: ectx: whatsthis, entry (HFRDeviation), group (Capture)
#. +> trunk5
#: kstars.kcfg:1524
#, kde-format
msgid "If HFR deviation exceeds this limit, the autofocus routine will be automatically started."
msgstr ""
#. i18n: ectx: label, entry (EnforceGuideDeviation), group (Capture)
#. +> trunk5
#: kstars.kcfg:1528
#, kde-format
msgid "Enforce guiding deviation limit."
msgstr ""
#. i18n: ectx: label, entry (EnforceAutofocus), group (Capture)
#. +> trunk5
#: kstars.kcfg:1532
#, kde-format
msgid "Enforce Autofocus HFR limit."
msgstr ""
#. i18n: ectx: label, entry (EnforceRefocusEveryN), group (Capture)
#. +> trunk5
#: kstars.kcfg:1536
#, kde-format
msgid "Enforce Refocus Every N Minutes."
msgstr ""
#. i18n: ectx: label, entry (RefocusEveryN), group (Capture)
#. +> trunk5
#: kstars.kcfg:1540
#, kde-format
msgid "Number of minute between forced refocus attempts"
msgstr ""
#. i18n: ectx: whatsthis, entry (RefocusEveryN), group (Capture)
#. +> trunk5
#: kstars.kcfg:1541
#, kde-format
msgid "Sets the time interval before forced autofocus attempts during a capture sequence."
msgstr ""
#. i18n: ectx: label, entry (AutoMeridianHours), group (Capture)
#. +> trunk5
#: kstars.kcfg:1545
#, kde-format
msgid "Default hour angle to perform meridian flip"
msgstr ""
#. i18n: ectx: whatsthis, entry (AutoMeridianHours), group (Capture)
#. +> trunk5
#: kstars.kcfg:1546
#, kde-format
msgid "If the target hour angle exceeds this value, Ekos will command a meridian flip and if successful it will resume guiding and capture operations."
msgstr ""
#. i18n: ectx: label, entry (AutoMeridianFlip), group (Capture)
#. +> trunk5
#: kstars.kcfg:1549
#, kde-format
msgid "Flips the mount when reaching the meridian, if supported."
msgstr ""
#. i18n: ectx: label, entry (ResetMountModelAfterMeridian), group (Capture)
#. +> trunk5
#: kstars.kcfg:1553
#, kde-format
msgid "Reset mount model after meridian flip."
msgstr ""
#. i18n: ectx: label, entry (CalibrationADUValue), group (Capture)
#. +> trunk5
#: kstars.kcfg:1557
#, kde-format
msgid "Desired flat field ADU"
msgstr ""
#. i18n: ectx: whatsthis, entry (CalibrationADUValue), group (Capture)
#. +> trunk5
#: kstars.kcfg:1558
#, kde-format
msgid "If set, Ekos will capture a few flat images to determine the optimal exposure time to achieve the desired ADU value."
msgstr ""
#. i18n: ectx: label, entry (CalibrationADUValueTolerance), group (Capture)
#. +> trunk5
#: kstars.kcfg:1562
#, kde-format
msgid "ADU Value tolerance"
msgstr ""
#. i18n: ectx: whatsthis, entry (CalibrationADUValueTolerance), group (Capture)
#. +> trunk5
#: kstars.kcfg:1563
#, kde-format
msgid "Maximum difference between measured and target ADU values to deem the value as acceptable."
msgstr ""
#. i18n: ectx: label, entry (CalibrationFlatSourceIndex), group (Capture)
#. +> trunk5
#: kstars.kcfg:1567
#, kde-format
msgid "Index of flat source option."
msgstr ""
#. i18n: ectx: label, entry (CalibrationFlatDurationIndex), group (Capture)
#. +> trunk5
#: kstars.kcfg:1571
#, kde-format
msgid "Index of flat duration option."
msgstr ""
#. i18n: ectx: label, entry (CalibrationWallAz), group (Capture)
#. +> trunk5
#: kstars.kcfg:1575
#, kde-format
msgid "Azimuth of calibration wall location."
msgstr ""
#. i18n: ectx: label, entry (CalibrationWallAlt), group (Capture)
#. +> trunk5
#: kstars.kcfg:1579
#, kde-format
msgid "Altitude of calibration wall location."
msgstr ""
#. i18n: ectx: label, entry (MaxTemperatureDiff), group (Capture)
#. +> trunk5
#: kstars.kcfg:1583
#, kde-format
msgid "Maximum acceptable difference between requested and measured temperature set point."
msgstr ""
#. i18n: ectx: label, entry (RememberJobProgress), group (Capture)
#. +> trunk5
#: kstars.kcfg:1587
#, kde-format
msgid "When starting a new capture job, check if files were previously captured and resume capture afterwards."
msgstr ""
#. i18n: ectx: label, entry (FlatSyncFocus), group (Capture)
#. +> trunk5
#: kstars.kcfg:1591
#, kde-format
msgid "Capture flat frames at the same focus position of light frames."
msgstr ""
#. i18n: ectx: label, entry (HFRThresholdPercentage), group (Capture)
#. +> trunk5
#: kstars.kcfg:1595
#, kde-format
msgid "Increase autofocus HFR value by this percentage gain and store it in Capture Module."
msgstr ""
#. i18n: ectx: label, entry (SaveHFRToFile), group (Capture)
#. +> trunk5
#: kstars.kcfg:1599
#, kde-format
msgid "When saving a sequence file, save current HFR threshold value. By default, zero value is used."
msgstr ""
#. i18n: ectx: label, entry (AutoStretch), group (Capture)
#. +> trunk5
#: kstars.kcfg:1611
#, kde-format
msgid "Perform auto stretch on captured images in FITS Viewer."
msgstr ""
#. i18n: ectx: label, entry (useSummaryPreview), group (Capture)
#. +> trunk5
#: kstars.kcfg:1615
#, kde-format
msgid "Display every image captured sequence image in the Ekos summary screen preview window."
msgstr ""
#. i18n: ectx: label, entry (CaptureFormatIndex), group (Capture)
#. +> trunk5
#: kstars.kcfg:1619
#, kde-format
msgid "Index of desired capture format (FITS or Native)."
msgstr ""
#. i18n: ectx: label, entry (CaptureDirectory), group (Capture)
#. +> trunk5
#: kstars.kcfg:1623
#, kde-format
msgid "Path to capture directory to save images."
msgstr ""
#. i18n: ectx: label, entry (DefaultFocusCCD), group (Focus)
#. +> trunk5
#: kstars.kcfg:1629
#, kde-format
msgid "Default focus module CCD."
msgstr ""
#. i18n: ectx: label, entry (DefaultFocusFocuser), group (Focus)
#. +> trunk5
#: kstars.kcfg:1632
#, kde-format
msgid "Default focus module focuser."
msgstr ""
#. i18n: ectx: label, entry (FocusTicks), group (Focus)
#. +> trunk5
#: kstars.kcfg:1635
#, kde-format
msgid "Default Focuser step ticks"
msgstr ""
#. i18n: ectx: whatsthis, entry (FocusTicks), group (Focus)
#. +> trunk5
#: kstars.kcfg:1636
#, kde-format
msgid "Step size of the absolute focuser. The step size TICKS should be adjusted so that when the focuser moves TICKS steps, the difference in HFR is more than 0.1 pixels. Lower the value when you are close to optimal focus."
msgstr ""
#. i18n: ectx: label, entry (FocusTolerance), group (Focus)
#. +> trunk5
#: kstars.kcfg:1644
#, kde-format
msgid "Default Focuser tolerance value"
msgstr ""
#. i18n: ectx: whatsthis, entry (FocusTolerance), group (Focus)
#. +> trunk5
#: kstars.kcfg:1645
#, kde-format
msgid "The tolerance specifies the percentage difference between the current focusing position and the minimum obtained during the focusing run. Adjustment of this value is necessary to prevent the focusing algorithm from oscillating back and forth."
msgstr ""
#. i18n: ectx: label, entry (FocusMaxTravel), group (Focus)
#. +> trunk5
#: kstars.kcfg:1649
#, kde-format
msgid "Maximum Focus Travel Distance"
msgstr ""
#. i18n: ectx: whatsthis, entry (FocusMaxTravel), group (Focus)
#. +> trunk5
#: kstars.kcfg:1650
#, kde-format
msgid "Set the maximum travel distance of an absolute focuser."
msgstr ""
#. i18n: ectx: label, entry (FocusExposure), group (Focus)
#. +> trunk5
#: kstars.kcfg:1654
#, kde-format
msgid "Default Focuser exposure value"
msgstr ""
#. i18n: ectx: whatsthis, entry (FocusExposure), group (Focus)
#. +> trunk5
#: kstars.kcfg:1655
#, kde-format
msgid "Specifies exposure value of CCD when performing focusing. Lower this value to avoid saturation of bright stars which adversely affects HFR measurement. Increase the value if no stars are detected."
msgstr ""
#. i18n: ectx: label, entry (FocusBoxSize), group (Focus)
#. +> trunk5
#: kstars.kcfg:1659
#, kde-format
msgid "Default Focuser star selection box size"
msgstr ""
#. i18n: ectx: whatsthis, entry (FocusBoxSize), group (Focus)
#. +> trunk5
#: kstars.kcfg:1660
#, kde-format
msgid "Set box size to select a focus star."
msgstr ""
#. i18n: ectx: label, entry (FocusXBin), group (Focus)
#. +> trunk5
#: kstars.kcfg:1664
#, kde-format
msgid "Default CCD X binning in focus mode"
msgstr ""
#. i18n: ectx: whatsthis, entry (FocusXBin), group (Focus)
#. +> trunk5
#: kstars.kcfg:1665
#, kde-format
msgid "Set horizontal binning of CCD camera while in focus mode."
msgstr ""
#. i18n: ectx: label, entry (FocusYBin), group (Focus)
#. +> trunk5
#: kstars.kcfg:1669
#, kde-format
msgid "Default CCD Y binning in focus mode"
msgstr ""
#. i18n: ectx: whatsthis, entry (FocusYBin), group (Focus)
#. +> trunk5
#: kstars.kcfg:1670
#, kde-format
msgid "Set vertical binning of CCD camera while in focus mode."
msgstr ""
#. i18n: ectx: label, entry (FocusSubFrame), group (Focus)
#. +> trunk5
#: kstars.kcfg:1674
#, kde-format
msgid "Subframe the focus star during the autofocus procedure."
msgstr ""
#. i18n: ectx: label, entry (FocusUseFullField), group (Focus)
#. +> trunk5
#: kstars.kcfg:1678
#, kde-format
msgid "Use full frame field to measure HFR."
msgstr ""
#. i18n: ectx: label, entry (FocusAutoStarEnabled), group (Focus)
#. +> trunk5
#: kstars.kcfg:1682
#, kde-format
msgid "Automatically select a star to focus."
msgstr ""
#. i18n: ectx: label, entry (SuspendGuiding), group (Focus)
#. +> trunk5
#: kstars.kcfg:1686
#, kde-format
msgid "Suspend guiding while autofocus in progress."
msgstr ""
#. i18n: ectx: label, entry (UseFocusDarkFrame), group (Focus)
#. +> trunk5
#: kstars.kcfg:1690
#, kde-format
msgid "Take a dark frame and subtract it before running autofocus operation."
msgstr ""
#. i18n: ectx: label, entry (FocusEffect), group (Focus)
#. +> trunk5
#: kstars.kcfg:1694
#, kde-format
msgid "Image filter to be applied to focus image upon loading."
msgstr ""
#. i18n: ectx: label, entry (FocusThreshold), group (Focus)
#. +> trunk5
#: kstars.kcfg:1698
#, kde-format
msgid "Relative percentage strength of centroid edge pixel strength to average pixel value."
msgstr ""
#. i18n: ectx: label, entry (FocusDetection), group (Focus)
#. +> trunk5
#: kstars.kcfg:1702
#, kde-format
msgid "Star detection algorithm"
msgstr ""
#. i18n: ectx: label, entry (FocusAlgorithm), group (Focus)
#. +> trunk5
#: kstars.kcfg:1706
#, kde-format
msgid "Focus process algorithm"
msgstr ""
#. i18n: ectx: label, entry (FocusFramesCount), group (Focus)
#. +> trunk5
#: kstars.kcfg:1710
#, kde-format
msgid "Number of focus frames to average for HFR calculations."
msgstr ""
#. i18n: ectx: label, entry (DefaultAlignCCD), group (Align)
#. +> trunk5
#: kstars.kcfg:1716
#, kde-format
msgid "Default align module CCD."
msgstr ""
#. i18n: ectx: label, entry (DefaultAlignFW), group (Align)
#. +> trunk5
#: kstars.kcfg:1719
#, kde-format
msgid "Default align module Filter Wheel."
msgstr ""
#. i18n: ectx: label, entry (AlignExposure), group (Align)
#. +> trunk5
#: kstars.kcfg:1722
#, kde-format
msgid "Default alignment exposure value"
msgstr ""
#. i18n: ectx: whatsthis, entry (AlignExposure), group (Align)
#. +> trunk5
#: kstars.kcfg:1723
#, kde-format
msgid "Specifies exposure value of CCD in seconds when performing plate solving."
msgstr ""
#. i18n: ectx: label, entry (SolverBinningIndex), group (Align)
#. +> trunk5
#: kstars.kcfg:1727
#, kde-format
msgid "Default CCD binning index while in alignment mode"
msgstr ""
#. i18n: ectx: whatsthis, entry (SolverBinningIndex), group (Align)
#. +> trunk5
#: kstars.kcfg:1728
#, kde-format
msgid "Set binning index of CCD camera while in alignment mode. Default values 0-3 corresponding to 1x1 to 4x4 binning"
msgstr ""
#. i18n: ectx: whatsthis, entry (AstrometrySolverVerbose), group (Align)
#. +> trunk5
#: kstars.kcfg:1732
#, kde-format
msgid "Display detailed verbose messages of the astrometry solver process while in progress."
msgstr ""
#. i18n: ectx: whatsthis, entry (AstrometryUseRotator), group (Align)
#. +> trunk5
#: kstars.kcfg:1736
#, kde-format
msgid "Use rotator when performing load and slew."
msgstr ""
#. i18n: ectx: whatsthis, entry (AstrometryRotatorThreshold), group (Align)
#. +> trunk5
#: kstars.kcfg:1740
#, kde-format
msgid "Threshold between measured and FITS position angles in arcminutes to consider the load and slew operation successful."
msgstr ""
#. i18n: ectx: label, entry (SolverType), group (Align)
#. +> trunk5
#: kstars.kcfg:1744
#, kde-format
msgid "Set solver type (online, offline, remote)."
msgstr ""
#. i18n: ectx: label, entry (SolverScopeType), group (Align)
#. +> trunk5
#: kstars.kcfg:1748
#, kde-format
msgid "Index of telescope type to be used when solving an image. 0 for Primary, 1 for Guide"
msgstr ""
#. i18n: ectx: label, entry (SolverGotoOption), group (Align)
#. +> trunk5
#: kstars.kcfg:1752
#, kde-format
msgid "Action to take if solver if successful (Sync, Slew to Target, or None)"
msgstr ""
#. i18n: ectx: label, entry (AstrometrySolverWCS), group (Align)
#. +> trunk5
#: kstars.kcfg:1756
#, kde-format
msgid "World Coordinate System (WCS). WCS is used to encode RA/DEC coordinates in captured CCD images."
msgstr ""
#. i18n: ectx: label, entry (AstrometrySolverOverlay), group (Align)
#. +> trunk5
#: kstars.kcfg:1760
#, kde-format
msgid "Display received FITS images unto solver FOV rectangle in the sky map."
msgstr ""
#. i18n: ectx: label, entry (AstrometryDifferentialSlewing), group (Align)
#. +> trunk5
#: kstars.kcfg:1764
#, kde-format
msgid "Do not use Sync when Slew to Target is selected. Use differential slewing to correct for discrepancies."
msgstr ""
#. i18n: ectx: label, entry (SolverAccuracyThreshold), group (Align)
#. +> trunk5
#: kstars.kcfg:1768
#, kde-format
msgid "Accuracy threshold in arcseconds between solution and target coordinates."
msgstr ""
#. i18n: ectx: label, entry (LockAlignFilterIndex), group (Align)
#. +> trunk5
#: kstars.kcfg:1772
#, kde-format
msgid "Use specified filter index when performing astrometry regardless of current filter settings."
msgstr ""
#. i18n: ectx: label, entry (AlignDarkFrame), group (Align)
#. +> trunk5
#: kstars.kcfg:1776
#, kde-format
msgid "Take a dark frame and subtract it before running astrometry operation."
msgstr ""
#. i18n: ectx: label, entry (SettlingTime), group (Align)
#. +> trunk5
#: kstars.kcfg:1780
#, kde-format
msgid "Time to wait in milliseconds after telescope slewing is complete before starting the next capture."
msgstr ""
#. i18n: ectx: label, entry (AstrometryUseNoFITS2FITS), group (Align)
#. +> trunk5
#: kstars.kcfg:1784
#, kde-format
msgid "Do not sanitize FITS. This option should only be checked if astrometry.net version is 0.67 or earlier. Uncheck for any versions greater than 0.67."
msgstr ""
#. i18n: ectx: label, entry (AstrometryUseResort), group (Align)
#. +> trunk5
#: kstars.kcfg:1788
#, kde-format
msgid "Check this option if your image does not have much nebulosity. If it does have strong nebulosity, uncheck it."
msgstr ""
#. i18n: ectx: label, entry (AstrometryUseNoVerify), group (Align)
#. +> trunk5
#: kstars.kcfg:1792
#, kde-format
msgid "This will prevent the solver from looking at an already existing WCS Header before blindly trying to solve the image. It is recommended to keep it checked."
msgstr ""
#. i18n: ectx: label, entry (AstrometryUseImageScale), group (Align)
#. +> trunk5
#: kstars.kcfg:1796
#, kde-format
msgid "Set image scale to speed up solver as it does not have to search index files of different image scales."
msgstr ""
#. i18n: ectx: label, entry (AstrometryImageScaleLow), group (Align)
#. +> trunk5
#: kstars.kcfg:1800
#, kde-format
msgid "Lower image scale."
msgstr ""
#. i18n: ectx: label, entry (AstrometryImageScaleHigh), group (Align)
#. +> trunk5
#: kstars.kcfg:1803
#, kde-format
msgid "Upper image scale."
msgstr ""
#. i18n: ectx: label, entry (AstrometryAutoUpdateImageScale), group (Align)
#. +> trunk5
#: kstars.kcfg:1806
#, kde-format
msgid "Automatically update image scale when CCD or Mount parameters are updated."
msgstr ""
#. i18n: ectx: label, entry (AstrometryImageScaleUnits), group (Align)
#. +> trunk5
#: kstars.kcfg:1810
#, kde-format
msgid "Image scale units in arcminutes (aw), degrees (dw), or arcsec per pixel (app)"
msgstr ""
#. i18n: ectx: label, entry (AstrometryUseDownsample), group (Align)
#. +> trunk5
#: kstars.kcfg:1814
#, kde-format
msgid "Downsample the image to shrink its size and speed up the solver."
msgstr ""
#. i18n: ectx: label, entry (AstrometryDownsample), group (Align)
#. +> trunk5
#: kstars.kcfg:1818
#, kde-format
msgid "Downsample factor"
msgstr ""
#. i18n: ectx: label, entry (AstrometryUsePosition), group (Align)
#. +> trunk5
#: kstars.kcfg:1822
#, kde-format
msgid "Set estimated position to speed up astrometry solver as it does not have to search in other areas of the sky."
msgstr ""
#. i18n: ectx: label, entry (AstrometryPositionRA), group (Align)
#. +> trunk5
#: kstars.kcfg:1826
#, kde-format
msgid "User supplied Right Ascension value in degrees to be passed to the solver."
msgstr ""
#. i18n: ectx: label, entry (AstrometryPositionDE), group (Align)
#. +> trunk5
#: kstars.kcfg:1829
#, kde-format
msgid "User supplied declination value in degrees to be passed to the solver."
msgstr ""
#. i18n: ectx: label, entry (AstrometryAutoUpdatePosition), group (Align)
#. +> trunk5
#: kstars.kcfg:1832
#, kde-format
msgid "Automatically update position coordinates when mounts completes slewing."
msgstr ""
#. i18n: ectx: label, entry (AstrometryRadius), group (Align)
#. +> trunk5
#: kstars.kcfg:1836
#, kde-format
msgid "The Search Radius for the Estimated Telescope/Image Field Position in degrees."
msgstr ""
#. i18n: ectx: label, entry (AstrometryDetectParity), group (Align)
#. +> trunk5
#: kstars.kcfg:1840
#, kde-format
msgid "Detect parity and reuse it to speed up solver."
msgstr ""
#. i18n: ectx: label, entry (AstrometryCustomOptions), group (Align)
#. i18n: ectx: label, entry (AstrometrySolverBinary), group (Align)
#. +> trunk5
#: kstars.kcfg:1847
#, kde-format
msgid "astrometry.net solve-field binary"
msgstr ""
#. i18n: ectx: whatsthis, entry (AstrometrySolverBinary), group (Align)
#. +> trunk5
#: kstars.kcfg:1848
#, kde-format
msgid "Path to astrometry.net solver location."
msgstr ""
#. i18n: ectx: label, entry (AstrometryWCSInfo), group (Align)
#. +> trunk5
#: kstars.kcfg:1856
#, kde-format
msgid "astrometry.net wcsinfo binary"
msgstr ""
#. i18n: ectx: whatsthis, entry (AstrometryWCSInfo), group (Align)
#. +> trunk5
#: kstars.kcfg:1857
#, kde-format
msgid "Path to astrometry.net wcsinfo location."
msgstr ""
#. i18n: ectx: label, entry (AstrometryConfFile), group (Align)
#. +> trunk5
#: kstars.kcfg:1865
#, kde-format
msgid "astrometry.net configuration file"
msgstr ""
#. i18n: ectx: whatsthis, entry (AstrometryConfFile), group (Align)
#. +> trunk5
#: kstars.kcfg:1866
#, kde-format
msgid "Path to astrometry.net file location."
msgstr ""
#. i18n: ectx: label, entry (AstrometryConfFileIsInternal), group (Align)
#. +> trunk5
#: kstars.kcfg:1870
#, kde-format
msgid "Internal or External Astrometry.net Conf File?"
msgstr ""
#. i18n: ectx: label, entry (AstrometryAPIKey), group (Align)
#. +> trunk5
#: kstars.kcfg:1874
#, kde-format
msgid "astrometry.net API Key"
msgstr ""
#. i18n: ectx: whatsthis, entry (AstrometryAPIKey), group (Align)
#. +> trunk5
#: kstars.kcfg:1875
#, kde-format
msgid "Key to access astrometry.net online web services. You must register with astrometry.net to obtain a key."
msgstr ""
#. i18n: ectx: label, entry (AstrometryAPIURL), group (Align)
#. +> trunk5
#: kstars.kcfg:1879
#, kde-format
msgid "astrometry.net API URL"
msgstr ""
#. i18n: ectx: label, entry (AstrometryUseJPEG), group (Align)
#. +> trunk5
#: kstars.kcfg:1883
#, kde-format
msgid "Use JPEG format, instead of FITS, to upload images to the astrometry.net online service."
msgstr ""
#. i18n: ectx: label, entry (AstrometryTimeout), group (Align)
#. +> trunk5
#: kstars.kcfg:1887
#, kde-format
msgid "Timeout in seconds to wait for astrometry solver to complete."
msgstr ""
#. i18n: ectx: label, entry (DefaultGuideCCD), group (Guide)
#. +> trunk5
#: kstars.kcfg:1893
#, kde-format
msgid "Default guide module CCD."
msgstr ""
#. i18n: ectx: label, entry (DefaultST4Driver), group (Guide)
#. +> trunk5
#: kstars.kcfg:1896
#, kde-format
msgid "Default guide module ST4 Driver."
msgstr ""
#. i18n: ectx: label, entry (GuideExposure), group (Guide)
#. +> trunk5
#: kstars.kcfg:1899
#, kde-format
msgid "Guider exposure duration in seconds."
msgstr ""
#. i18n: ectx: label, entry (GuiderType), group (Guide)
#. +> trunk5
#: kstars.kcfg:1903
#, kde-format
msgid "Which guider process to utilize for guiding (0 Internal Guider, 1 PHD2, 2 lin_guider)"
msgstr ""
#. i18n: ectx: label, entry (GuideAlgorithm), group (Guide)
#. +> trunk5
#: kstars.kcfg:1907
#, kde-format
msgid "Which Algorithm to use track guide square (0 smart, 1 fast, 2 threshold, 3 no threshold)."
msgstr ""
#. i18n: ectx: label, entry (PHD2Host), group (Guide)
#. +> trunk5
#: kstars.kcfg:1911
#, kde-format
msgid "Host name of external PHD2 service"
msgstr ""
#. i18n: ectx: label, entry (PHD2Port), group (Guide)
#. +> trunk5
#: kstars.kcfg:1915
#, kde-format
msgid "PHD2 Event Monitoring Port"
msgstr ""
#. i18n: ectx: label, entry (LinGuiderHost), group (Guide)
#. +> trunk5
#: kstars.kcfg:1919
#, kde-format
msgid "Host name of external lin_guider service"
msgstr ""
#. i18n: ectx: label, entry (LinGuiderPort), group (Guide)
#. +> trunk5
#: kstars.kcfg:1923
#, kde-format
msgid "Lin_guider Event Monitoring Port"
msgstr ""
#. i18n: ectx: label, entry (GuideScopeType), group (Guide)
#. +> trunk5
#: kstars.kcfg:1927
#, kde-format
msgid "Index of telescope type to be used when guiding. 0 for Primary, 1 for Guide"
msgstr ""
#. i18n: ectx: label, entry (CalibrationPulseDuration), group (Guide)
#. +> trunk5
#: kstars.kcfg:1931
#, kde-format
msgid "Pulse duration in milliseconds used for guiding pulses during calibration stage."
msgstr ""
#. i18n: ectx: label, entry (GuideSquareSizeIndex), group (Guide)
#. +> trunk5
#: kstars.kcfg:1935
#, kde-format
msgid "Guide square size index (0 to 4) corresponding to pixel sizes (8 to 128)."
msgstr ""
#. i18n: ectx: label, entry (ImageGuidingEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:1939
#, kde-format
msgid "Use Image Guiding algorithms instead of classical centroid guiding."
msgstr ""
#. i18n: ectx: label, entry (GuideRegionAxis), group (Guide)
#. +> trunk5
#: kstars.kcfg:1943
#, kde-format
msgid "Region Axis Index (0 to 4) corresponding to NxN partition size used Image Guiding (64 to 1024)."
msgstr ""
#. i18n: ectx: label, entry (GuideAutoStarEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:1947
#, kde-format
msgid "Automatically select calibration star and perform calibration."
msgstr ""
#. i18n: ectx: label, entry (GuideRemoteImagesEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:1955
#, kde-format
msgid "When using external guiders, enable reception of remote images in Ekos guide module. By default, remote images are disabled."
msgstr ""
#. i18n: ectx: label, entry (AutoModeIterations), group (Guide)
#. +> trunk5
#: kstars.kcfg:1959
#, kde-format
msgid "Number of automode iterations for calibration process."
msgstr ""
#. i18n: ectx: label, entry (GuideLostStarTimeout), group (Guide)
#. +> trunk5
#: kstars.kcfg:1963
#, kde-format
msgid "When star tracking is lost, wait this many seconds before aborting."
msgstr ""
#. i18n: ectx: label, entry (TwoAxisEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:1967
#, kde-format
msgid "Use both axes to perform calibration."
msgstr ""
#. i18n: ectx: label, entry (RapidGuideEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:1971
#, kde-format
msgid "Use driver side Rapid Guide to perform guiding."
msgstr ""
#. i18n: ectx: label, entry (GuideDarkFrameEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:1975
#, kde-format
msgid "Take dark frame for autoguider images."
msgstr ""
#. i18n: ectx: label, entry (GuideSubframeEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:1979
#, kde-format
msgid "Subframe guide image around selected region"
msgstr ""
#. i18n: ectx: label, entry (DitherPixels), group (Guide)
#. +> trunk5
#: kstars.kcfg:1983
#, kde-format
msgid "How many pixels to move between subsequent exposures under auto dithering mode."
msgstr ""
#. i18n: ectx: label, entry (DitherFrames), group (Guide)
#. +> trunk5
#: kstars.kcfg:1987
#, kde-format
msgid "Dither after this many frames."
msgstr ""
#. i18n: ectx: label, entry (DitherThreshold), group (Guide)
#. +> trunk5
#: kstars.kcfg:1995
#, kde-format
msgid "Maximum distance (pixels) for guiding to be considered settled."
msgstr ""
#. i18n: ectx: label, entry (DitherTimeout), group (Guide)
#. +> trunk5
#: kstars.kcfg:1999
#, kde-format
msgid "Time limit (seconds) on dithering to settle down."
msgstr ""
#. i18n: ectx: label, entry (DitherMaxIterations), group (Guide)
#. +> trunk5
#: kstars.kcfg:2003
#, kde-format
msgid "How many dithering attempts to undertake before giving up."
msgstr ""
#. i18n: ectx: label, entry (DitherNoGuidingPulse), group (Guide)
#. +> trunk5
#: kstars.kcfg:2007
#, kde-format
msgid "Pulse length in milliseconds used for non-guiding dither."
msgstr ""
#. i18n: ectx: label, entry (DitherFailAbortsAutoGuide), group (Guide)
#. +> trunk5
#: kstars.kcfg:2011
#, kde-format
msgid "If dithering fails then abort autoguide."
msgstr ""
#. i18n: ectx: label, entry (DitherEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:2015
#, kde-format
msgid "Use Auto Dithering when guiding."
msgstr ""
#. i18n: ectx: label, entry (DitherNoGuiding), group (Guide)
#. +> trunk5
#: kstars.kcfg:2019
#, kde-format
msgid "Perform dithering even when not guiding."
msgstr ""
#. i18n: ectx: label, entry (AOLimit), group (Guide)
#. +> trunk5
#: kstars.kcfg:2023
#, kde-format
msgid "The Adaptive Optics unit is utilized if the guiding deviation is less than this limit in arcseconds. Once exceeded, mechanical guiding is utilized."
msgstr ""
#. i18n: ectx: label, entry (RAGuideEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:2027
#, kde-format
msgid "Enable autoguiding in the RA axis."
msgstr ""
#. i18n: ectx: label, entry (DECGuideEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:2031
#, kde-format
msgid "Enable autoguiding in the DEC axis."
msgstr ""
#. i18n: ectx: label, entry (NorthDECGuideEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:2035
#, kde-format
msgid "Enable North autoguiding in the DEC axis."
msgstr ""
#. i18n: ectx: label, entry (SouthDECGuideEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:2039
#, kde-format
msgid "Enable South autoguiding in the DEC axis."
msgstr ""
#. i18n: ectx: label, entry (EastRAGuideEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:2043
#, kde-format
msgid "Enable East autoguiding in the RA axis."
msgstr ""
#. i18n: ectx: label, entry (WestRAGuideEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:2047
#, kde-format
msgid "Enable West autoguiding in the RA axis."
msgstr ""
#. i18n: ectx: label, entry (GuiderAccuracyThreshold), group (Guide)
#. +> trunk5
#: kstars.kcfg:2084
#, kde-format
msgid "Accuracy threshold for the Guide Graphs."
msgstr ""
#. i18n: ectx: label, entry (RADisplayedOnGuideGraph), group (Guide)
#. +> trunk5
#: kstars.kcfg:2088
#, kde-format
msgid "Display the RA Plot on the Guide Drift Graphics."
msgstr ""
#. i18n: ectx: label, entry (DEDisplayedOnGuideGraph), group (Guide)
#. +> trunk5
#: kstars.kcfg:2092
#, kde-format
msgid "Display the DEC Plot on the Guide Drift Graphics."
msgstr ""
#. i18n: ectx: label, entry (RACorrDisplayedOnGuideGraph), group (Guide)
#. +> trunk5
#: kstars.kcfg:2096
#, kde-format
msgid "Display the RA Corrections Plot on the Guide Drift Graphics."
msgstr ""
#. i18n: ectx: label, entry (DECorrDisplayedOnGuideGraph), group (Guide)
#. +> trunk5
#: kstars.kcfg:2100
#, kde-format
msgid "Display the DEC Corrections Plot on the Guide Drift Graphics."
msgstr ""
#. i18n: ectx: whatsthis, entry (SchedulerLogging), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2106
#, kde-format
msgid "Log Ekos Scheduler Module activity."
msgstr ""
#. i18n: ectx: whatsthis, entry (SortSchedulerJobs), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2110
#, kde-format
msgid "Sort scheduler jobs by priority and altitude."
msgstr ""
#. i18n: ectx: label, entry (StopEkosAfterShutdown), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2114
#, kde-format
msgid "After shutdown procedure is successfully executed, shutdown INDI and Ekos."
msgstr ""
#. i18n: ectx: label, entry (ShutdownScriptTerminatesINDI), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2118
#, kde-format
msgid "Whether shutdown script, if exists, terminates INDI server in the process."
msgstr ""
#. i18n: ectx: label, entry (PreemptiveShutdown), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2122
#, kde-format
msgid "Perform pre-emptive shutdown if no jobs are due for a number of hours."
msgstr ""
#. i18n: ectx: label, entry (ResetMountModelOnAlignFail), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2126
#, kde-format
msgid "Reset mount model in case of alignment failure."
msgstr ""
#. i18n: ectx: label, entry (ResetMountModelBeforeJob), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2130
#, kde-format
msgid "Reset mount model before starting each job."
msgstr ""
#. i18n: ectx: label, entry (ResetGuideCalibration), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2134
#, kde-format
msgid "Always Reset guiding calibration before starting each job."
msgstr ""
#. i18n: ectx: label, entry (PreemptiveShutdownTime), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2138
#, kde-format
msgid "Maximum number of hours before the next job is due to trigger a pre-emptive shutdown."
msgstr ""
#. i18n: ectx: label, entry (LeadTime), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2142
#, kde-format
msgid "Minimum time between jobs in minutes."
msgstr ""
#. i18n: ectx: label, entry (PreDawnTime), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2146
#, kde-format
msgid "Do not permit jobs to be scheduled or executed past this many minutes before dawn."
msgstr ""
#. i18n: ectx: label, entry (TelescopeFocalLength), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2150
#, kde-format
msgid "Telescope focal length in millimeters."
msgstr ""
#. i18n: ectx: label, entry (CameraPixelWidth), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2154
#, kde-format
msgid "Camera pixel size width in micrometers."
msgstr ""
#. i18n: ectx: label, entry (CameraPixelHeight), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2158
#, kde-format
msgid "Camera pixel size height in micrometers."
msgstr ""
#. i18n: ectx: label, entry (CameraWidth), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2162
#, kde-format
msgid "Camera Width in pixels."
msgstr ""
#. i18n: ectx: label, entry (CameraHeight), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2166
#, kde-format
msgid "Camera Height in pixels."
msgstr ""
#. i18n: ectx: label, entry (CameraRotation), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2170
#, kde-format
msgid "Position angle of the camera with respect to north."
msgstr ""
#. i18n: ectx: label, entry (LastServer), group (INDI Lite)
#. +> trunk5
#: kstars.kcfg:2176
#, kde-format
msgid "The address of last used server"
msgstr ""
#. i18n: ectx: label, entry (LastServerPort), group (INDI Lite)
#. +> trunk5
#: kstars.kcfg:2179
#, kde-format
msgid "The port of last used server"
msgstr ""
#. i18n: ectx: label, entry (LastWebManagerPort), group (INDI Lite)
#. +> trunk5
#: kstars.kcfg:2183
#, kde-format
msgid "The port of last used Web Manager"
msgstr ""
#. i18n: ectx: label, entry (HIPSMemoryCache), group (HIPS)
#. +> trunk5
#: kstars.kcfg:2189
#, kde-format
msgid "RAM cache size in MB used to store cached HIPS images."
msgstr ""
#. i18n: ectx: label, entry (HIPSNetCache), group (HIPS)
#. +> trunk5
#: kstars.kcfg:2193
#, kde-format
msgid "Hard disk cache size in MB used to store cached HIPS images."
msgstr ""
#. i18n: ectx: label, entry (HIPSSource), group (HIPS)
#. +> trunk5
#: kstars.kcfg:2197
#, kde-format
msgid "HIPS source catalog title."
msgstr ""
#. i18n: ectx: label, entry (HIPSBiLinearInterpolation), group (HIPS)
#. +> trunk5
#: kstars.kcfg:2201
#, kde-format
msgid "Use Bilinear interpolation when rendering HiPS images?"
msgstr ""
#. i18n: ectx: label, entry (HIPSShowGrid), group (HIPS)
#. +> trunk5
#: kstars.kcfg:2205
#, kde-format
msgid "Show HiPS grid on the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowHIPS), group (HIPS)
#. +> trunk5
#: kstars.kcfg:2209
#, kde-format
msgid "Draw HiPS sources in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowHIPS), group (HIPS)
#. +> trunk5
#: kstars.kcfg:2210
#, kde-format
msgid "Toggle whether the HIPS sources are drawn in the sky map."
"<p>The ICC profiles folder seems to be invalid.</p>"
"<p>If you want to try setting it again, choose \"Yes\" here, otherwise choose \"No\", and the \"Color Management\" feature will be disabled until you solve this issue.</p>"
msgstr ""
#. +> trunk5
#: core/app/main/digikamapp.cpp:525
#, kde-format
msgid "No item selected (%1 item)"
msgid_plural "No item selected (%1 items)"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5
#: core/app/main/digikamapp.cpp:531
#, kde-format
msgid "No item selected (%1 [%2] item)"
msgid_plural "No item selected (%1 [%2] items)"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5
#: core/app/main/digikamapp.cpp:535
#, kde-format
msgid "No item selected (%1 item. With grouped items: %2)"
msgid_plural "No item selected (%1 items. With grouped items: %2)"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5
#: core/app/main/digikamapp.cpp:544
#, kde-format
msgid "%1/%2 items selected"
msgstr ""
#. +> trunk5
#: core/app/main/digikamapp.cpp:554
#, kde-format
msgid "%1/%2 [%3] items selected"
msgstr ""
#. +> trunk5
#: core/app/main/digikamapp.cpp:557
#, kde-format
msgid "%1/%2 items selected. Total with grouped items: %3"
msgstr ""
#. +> trunk5
#: core/app/main/digikamapp.cpp:564
#, kde-format
msgid "%1/%2 [%3/%4] items selected"
msgstr ""
#. +> trunk5
#: core/app/main/digikamapp.cpp:568
#, kde-format
msgid "%1/%2 items selected. With grouped items: %3/%4"
msgstr ""
#. +> trunk5
#: core/app/main/digikamapp.cpp:590
#, kde-format
msgid " (%1 of %2)"
msgstr ""
#. +> trunk5
#: core/app/main/digikamapp.cpp:599
#, kde-format
msgid " (%1 of %2 [%3])"
msgstr ""
#. +> trunk5
#: core/app/main/digikamapp.cpp:603
#, kde-format
msgid " (%1 of %2. Total with grouped items: %3)"
msgstr ""
#. +> trunk5
-#: core/app/main/digikamapp.cpp:649
+#: core/app/main/digikamapp.cpp:650
#, kde-format
msgid "Write Metadata to File"
msgid_plural "Write Metadata to Selected Files"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5
-#: core/app/main/digikamapp.cpp:651
+#: core/app/main/digikamapp.cpp:652
#, kde-format
msgid "Reread Metadata From File"
msgid_plural "Reread Metadata From Selected Files"
msgid "Edit album properties and collection information."
msgstr ""
#. +> trunk5
#: core/app/main/digikamapp_setup.cpp:261
#, kde-format
msgid "Write Metadata to Files"
msgstr ""
#. +> trunk5
#: core/app/main/digikamapp_setup.cpp:262
#: core/app/main/digikamapp_setup.cpp:419
#, kde-format
msgid "Updates metadata of files in the current album with the contents of digiKam database (file metadata will be overwritten with data from the database)."
msgstr ""
#. +> trunk5
#: core/app/main/digikamapp_setup.cpp:271
#, kde-format
msgid "Reread Metadata From Files"
msgstr ""
#. +> trunk5
#: core/app/main/digikamapp_setup.cpp:272
#: core/app/main/digikamapp_setup.cpp:430
#, kde-format
msgid "Updates the digiKam database from the metadata of the files in the current album (information in the database will be overwritten with data from the files' metadata)."
msgid "Open camera dialog for the device with Solid UDI <udi>"
msgstr ""
#. +> trunk5
#: core/app/main/main.cpp:103
#, kde-format
msgid "Automatically detect and open a connected gphoto2 camera"
msgstr ""
#. +> trunk5
#: core/app/main/main.cpp:105
#, kde-format
msgid "Start digikam with the SQLite database file found in the directory <dir>"
msgstr ""
#. +> trunk5
#: core/app/main/main.cpp:108
#, kde-format
msgid "Start digikam with the configuration file <config>"
msgstr ""
#. +> trunk5
#: core/app/main/main.cpp:128
#, kde-format
msgid ""
"Run-time Qt SQLite or MySQL database plugin is not available. please install it.\n"
"There is no database plugin installed on your computer."
msgstr ""
#. +> trunk5
#: core/app/main/main.cpp:137
#, kde-format
msgid ""
"Run-time Qt SQLite or MySQL database plugin are not available. Please install it.\n"
"Database plugins installed on your computer are listed below."
msgstr ""
#. +> trunk5
#: core/app/main/main.cpp:174
#, kde-format
msgid "<p>The given path for the config file is not valid. Either its parent directory does not exist, it is a directory itself or it cannot be read/written to.</p>"
msgid "Are you sure you want to delete those items permanently?"
msgstr ""
#. +> trunk5
#: core/app/views/trashview.cpp:262
#, kde-format
msgid "Are you sure you want to delete ALL items permanently?"
msgstr ""
#. +> trunk5
#: core/app/views/welcomepageview.cpp:125
#, kde-format
msgid "Image Editor: Add Web services Import and Export tools;"
msgstr ""
#. +> trunk5
#: core/app/views/welcomepageview.cpp:126
#, kde-format
msgid "Showfoto: Add Web services Import and Export tools;"
msgstr ""
#. +> trunk5
#: core/app/views/welcomepageview.cpp:127
#, kde-format
msgid "Light Table: Add Web services Import and Export tools;"
msgstr ""
#. +> trunk5
#: core/app/views/welcomepageview.cpp:128
#, kde-format
msgid "New video metadata parser based on ffmpeg to populate database;"
msgstr ""
#. +> trunk5
#: core/app/views/welcomepageview.cpp:129
#, kde-format
msgid "Add video support to find files based on properties registered on database."
msgstr ""
#. +> trunk5
#: core/app/views/welcomepageview.cpp:130
#, kde-format
msgid "Similarity database has been moved to a dedicated file to not bloat core database with computed finger-prints. This will speed-up query in core database in case of Similarity feature is used."
msgstr ""
#. +> trunk5
#: core/app/views/welcomepageview.cpp:132
#, kde-format
msgid "Add possibility to merge tags by drag & drop."
msgstr ""
#. +> trunk5
#: core/app/views/welcomepageview.cpp:133
#, kde-format
msgid "HTML Gallery: New Vanilla theme to emulate export to HTML from Adobe LightRoom."
msgstr ""
#. +> trunk5
#: core/app/views/welcomepageview.cpp:134
#, kde-format
msgid "HTML Gallery: New Blue Frame theme."
msgstr ""
#. +> trunk5
#: core/app/views/welcomepageview.cpp:137
#, kde-format
msgid "...and much more."
msgstr ""
#. +> trunk5
#: core/app/views/welcomepageview.cpp:143
#, kde-format
msgid ""
"<li>%1</li>"
"\n"
msgstr ""
#. +> trunk5
#: core/app/views/welcomepageview.cpp:146
#, kde-format
msgid "New Features"
msgstr ""
#. +> trunk5
#: core/app/views/welcomepageview.cpp:148
#, kde-format
msgid ""
"<h3>%1</h3>"
"<ul>%2</ul>"
msgstr ""
#. +> trunk5
#: core/app/views/welcomepageview.cpp:149
#, kde-format
msgid "Some of the new features in this release of digiKam include (compared to digiKam 5.x):"
msgstr ""
#. +> trunk5
#: core/app/views/welcomepageview.cpp:158
#, kde-format
msgid "About"
msgstr ""
#. +> trunk5
#: core/app/views/welcomepageview.cpp:160
#, kde-format
msgid ""
"<h3>%1</h3>"
"<h3>%2</h3>"
"<ul>%3</ul>"
msgstr ""
#. +> trunk5
#: core/app/views/welcomepageview.cpp:161
#, kde-format
msgid "digiKam is an open source photo management program designed to import, organize, enhance, search and export your digital images to and from your computer."
msgstr ""
#. +> trunk5
#: core/app/views/welcomepageview.cpp:162
#, kde-format
msgid "Currently, you are in the Album view mode of digiKam. Albums are the places where your files are stored, and are identical to the folders on your hard disk."
msgstr ""
#. +> trunk5
#: core/app/views/welcomepageview.cpp:163
#, kde-format
msgid ""
"<li>%1</li>"
"<li>%2</li>"
msgstr ""
#. +> trunk5
#: core/app/views/welcomepageview.cpp:164
#, kde-format
msgid "digiKam has many powerful features which are described in the <a href=\"https://docs.kde.org/trunk5/en/extragear-graphics/digikam/index.html\">documentation</a>"
msgstr ""
#. +> trunk5
#: core/app/views/welcomepageview.cpp:165
#, kde-format
msgid "The <a href=\"http://www.digikam.org\">digiKam homepage</a> provides information about new versions of digiKam."
msgid "Failed to backup the existing database file (\"%1\"). Refusing to replace file without backup, using the existing file."
msgstr ""
#. +> trunk5
#: core/libs/album/albummanager.cpp:433
#, kde-format
msgid "Failed to copy the old database file (\"%1\") to its new location (\"%2\"). Starting with an empty database."
msgstr ""
#. +> trunk5
#: core/libs/album/albummanager.cpp:467
#, kde-format
msgid "Database Folder"
msgstr ""
#. +> trunk5
#: core/libs/album/albummanager.cpp:468
#, kde-format
msgid ""
"<p>You have chosen the folder \"%1\" as the place to store the database. A database file from an older version of digiKam is found in this folder.</p>"
" "
"<p>Would you like to upgrade the old database file - confirming that this database file was indeed created for the pictures located in the folder \"%2\" - or ignore the old file and start with a new database?</p>"
"<p>You have chosen the folder \"%1\" as the new place to store the database. A database file from an older version of digiKam is found in this folder.</p>"
" "
"<p>Would you like to upgrade the old database file, start with a new database, or copy the current database to this location and continue using it?</p>"
"<p>You have chosen the folder \"%1\" as the new place to store the database. A database file from an older version of digiKam is found in this folder.</p>"
" "
"<p>Would you like to upgrade the old database file or start with a new database?</p>"
msgstr ""
#. +> trunk5
#: core/libs/album/albummanager.cpp:589
#, kde-format
msgid "Failed to copy the old database file (\"%1\") to its new location (\"%2\"). Trying to upgrade old databases."
msgstr ""
#. +> trunk5
#: core/libs/album/albummanager.cpp:604
#, kde-format
msgid ""
"<p>You have chosen the folder \"%1\" as the new place to store the database.</p>"
"<p>Would you like to copy the current database to this location and continue using it, or start with a new database?</p>"
" "
msgstr ""
#. +> trunk5
#: core/libs/album/albummanager.cpp:636
#, kde-format
msgid ""
"<p>You have chosen the folder \"%1\" as the new place to store the database. There is already a database file in this location.</p>"
" "
"<p>Would you like to use this existing file as the new database, or remove it and copy the current database to this place?</p>"
" "
msgstr ""
#. +> trunk5
#: core/libs/album/albummanager.cpp:646
#, kde-format
msgid "Use Existing File"
msgstr ""
#. +> trunk5
#: core/libs/album/albummanager.cpp:748
#, kde-format
msgid ""
"<p><b>An error occurred during the internal server start.</b></p>"
"<p>You cannot use digiKam without a working database. digiKam will attempt to start now, but it will <b>not</b> be functional. Please check the database settings in the <b>configuration menu</b>.</p>"
msgstr ""
#. +> trunk5
#: core/libs/album/albummanager.cpp:805
#, kde-format
msgid ""
"<p>Failed to open the database. Error message from database:</p>"
"<p><b>%1</b></p>"
"</p>"
"<p>You cannot use digiKam without a working database. digiKam will attempt to start now, but it will <b>not</b> be functional. Please check the database settings in the <b>configuration menu</b>.</p>"
msgstr ""
#. +> trunk5
#: core/libs/album/albummanager.cpp:878
#, kde-format
msgid ""
"Your locale has changed since this album was last opened.\n"
"Old locale: %1, new locale: %2\n"
"If you have recently changed your locale, you need not be concerned.\n"
"Please note that if you switched to a locale that does not support some of the filenames in your collection, these files may no longer be found in the collection. If you are sure that you want to continue, click 'Yes'. Otherwise, click 'No' and correct your locale setting before restarting digiKam."
msgstr ""
#. +> trunk5
#: core/libs/album/albummanager.cpp:920
#, kde-format
msgid ""
"<p>The collection </p>"
"<p><b>%1</b><br/>"
"(%2)</p>"
"<p> is currently not found on your system.<br/>"
" Please choose the most appropriate option to handle this situation:</p>"
msgstr ""
#. +> trunk5
#: core/libs/album/albummanager.cpp:938
#, kde-format
msgid ""
"<p>The collection is still available, but the identifier changed.<br/>"
"This can be caused by restoring a backup, changing the partition layout or the file system settings.<br/>"
"The collection is now located at this place:</p>"
msgstr ""
#. +> trunk5
#: core/libs/album/albummanager.cpp:957
#, kde-format
msgid "The collection is located on a storage device which is not always attached. Mark the collection as a removable collection."
msgstr ""
#. +> trunk5
#: core/libs/album/albummanager.cpp:964
#, kde-format
msgid "Take no action now. I would like to solve the problem later using the setup dialog"
msgid "This is a CD/DVD, which is identified by the label that you can set in your CD burning application. There is already another entry with the same label. The two will be distinguished by the files in the top directory, so please do not append files to the CD, or it will not be recognized. In the future, please set a unique label on your CDs and DVDs if you intend to use them with digiKam."
msgid "This is a CD/DVD. It will be identified by the label (\"%1\")that you have set in your CD burning application. If you create further CDs for use with digikam in the future, please remember to give them a unique label as well."
msgid "This entry will only be identified by the path where it is found on your system (\"%1\"). No more specific means of identification (UUID, label) is available."
msgid "It is not possible on your system to identify the storage medium of this path. It will be added using the file path as the only identifier. This will work well for your local hard disk."
msgid "The database is not valid: the \"DBVersion\" setting does not exist. The current database schema version cannot be verified. Try to start with an empty database. "
msgid "The database has been used with a more recent version of digiKam and has been updated to a database schema which cannot be used with this version. (This means this digiKam version is too old, or the database format is too recent.) Please use the more recent version of digiKam that you used before. "
msgid "Failed to open a database transaction on your database file \"%1\". This is unusual. Please check that you can access the file and no other process has currently locked the file. If the problem persists you can get help from the digikam developers mailing list (see www.digikam.org/support). As well, please have a look at what digiKam prints on the console. "
msgid "The schema updating process from version 4 to 6 failed, caused by an error that we did not expect. You can try to discard your old database and start with an empty one. (In this case, please move the database files \"%1\" and \"%2\" from the directory \"%3\"). More probably you will want to report this error to the digikam developers mailing list (see www.digikam.org/support). As well, please have a look at what digiKam prints on the console. "
msgid "Failed to update the database schema from version %1 to version %2. Please read the error messages printed on the console and report this error as a bug at bugs.kde.org. "
msgid "The database update action cannot be found. Please ensure that the dbconfig.xml file of the current version of digiKam is installed at the correct place. "
msgid "Failed to copy the old database file (\"%1\") to its new location (\"%2\"). Error message: \"%3\". Please make sure that the file can be copied, or delete it."
msgid "The old database file (\"%1\") has been copied to the new location (\"%2\") but it cannot be opened. Please delete both files and try again, starting with an empty database. "
msgid "No album library path has been found in the configuration file. Giving up the schema updating process. Please try with an empty database, or repair your configuration."
msgid "There was an error associating your albumLibraryPath (\"%1\") with a storage volume of your system. This problem may indicate that there is a problem with your installation. If you are working on Linux, check that HAL is installed and running. In any case, you can seek advice from the digikam developers mailing list (see www.digikam.org/support). The database updating process will now be aborted because we do not want to create a new database based on false assumptions from a broken installation."
msgid "Could not open the configuration file <b>%1</b>. This file is installed with the digikam application and is absolutely required to run digikam. Please check your installation."
msgid "An old version of the configuration file <b>%1</b> is found. Please ensure that the version released with the running version of digiKam is installed. "
msgid "The database is not valid: the \"DBSimilarityVersion\" setting does not exist. The current database schema version cannot be verified. Try to start with an empty database. "
msgid "The database has been used with a more recent version of digiKam and has been updated to a database schema which cannot be used with this version. (This means this digiKam version is too old, or the database format is to recent) Please use the more recent version of digikam that you used before. "
msgstr ""
#. +> trunk5
#: core/libs/database/tags/facetags.cpp:377
#, kde-format
msgctxt "People on your photos"
msgid "People"
msgstr ""
#. +> trunk5
#: core/libs/database/tags/facetags.cpp:420
#, kde-format
msgctxt "The list of detected faces from the collections but not recognized"
msgid "Unknown"
msgstr ""
#. +> trunk5
#: core/libs/database/tags/facetags.cpp:440
#, kde-format
msgctxt "The list of recognized faces from the collections but not confirmed"
msgid "The database is not valid: the \"DBThumbnailsVersion\" setting does not exist. The current database schema version cannot be verified. Try to start with an empty database. "
"<p>Select here the type of database backend.</p>"
"<p><b>SQlite</b> backend is for local database storage with a small or medium collection sizes. It is the default and recommended backend for collections with less than 100K items.</p>"
"<p><b>MySQL Internal</b> backend is for local database storage with huge collection sizes. This backend is recommend for local collections with more than 100K items.</p>"
"<p><i>Be careful: this one still in experimental stage.</i></p>"
"<p><b>MySQL Server</b> backend is a more robust solution especially for remote and shared database storage. It is also more efficient to manage huge collection sizes with more than 100K items.</p>"
"<p><i>Be careful: this one still in experimental stage.</i></p>"
"<p>Set here the location where the database files will be stored on your system. There are three databases: one for all collections properties, one to store compressed thumbnails, and one to store faces recognition metadata.<br/>"
"Write access is required to be able to edit image properties.</p>"
"<p>Databases are digiKam core engines. Take care to use a place hosted by fast hardware (as SSD) with enough free space especially for thumbnails database.</p>"
"<p>Note: a remote file system such as NFS, cannot be used here. For performance reasons, it is also recommended not to use removable media.</p>"
msgid "<p>Here you can configure locations where MySQL binary tools are located. digiKam will try to find these binaries automatically if they are already installed on your computer.</p>"
"<p>digiKam expects that database is already created with a dedicated user account. This user name <i>digikam</i> will require full access to the database.<br/>"
"If your database is not already set up, you can use the following SQL commands (after replacing the <b><i>password</i></b> with the correct one).<br>"
"<p>Note: with a Linux server, a database can be initialized following the commands below:</p>"
"<p># su</p>"
"<p># systemctl restart mysqld</p>"
"<p># mysql -u root</p>"
"<p>...</p>"
"<p>Enter SQL code to Mysql prompt in order to init digiKam databases with grant privileges (see behind)</p>"
"<p>...</p>"
"<p>quit</p>"
"<p>NOTE: If you have an enormous collection, you should start MySQL server with mysql --max_allowed_packet=128M OR in my.ini or ~/.my.cnf, change the settings</p>"
"<p>Use this configuration view to set all information to be connected to a remote <a href=\"https://en.wikipedia.org/wiki/MySQL\">Mysql database server</a> (or <a href=\"https://en.wikipedia.org/wiki/MariaDB\">MariaDB</a>) through a network. As with Sqlite or MySQL internal server, 3 databases will be stored on the remote server: one for all collections properties, one to store compressed thumbnails, and one to store faces recognition metadata.</p>"
"<p>Unlike Sqlite or MySQL internal server, you can customize the database names to simplify your backups.</p>"
"<p>Databases are digiKam core engines. To prevent performance issues, take a care to use a fast network link between the client and the server computers. It is also recommended to host database files on fast hardware (as <a href=\"https://en.wikipedia.org/wiki/Solid-state_drive\">SSD</a>) with enough free space, especially for thumbnails database, even if data are compressed using wavelets image format <a href=\"https://en.wikipedia.org/wiki/Progressive_Graphics_File\">PGF</a>.</p>"
"<p>The databases must be created previously on the remote server by the administrator. Look in <b>Requirements</b> tab for details.</p>"
"<p>Simulate black and white film exposure using a green filter. This is useful for all scenic shoots, especially portraits photographed against the sky.</p>"
"<p>Simulate black and white film exposure using a yellow filter. This has the most natural tonal correction, and improves contrast. Ideal for landscapes.</p>"
"<p>Simulate black and white film exposure using a yellow-green filter. A yellow-green filter is highly effective for outdoor portraits because red is rendered dark while green appears lighter. Great for correcting skin tones, bringing out facial expressions in close-ups and emphasizing the feeling of liveliness. This filter is highly effective for indoor portraits under tungsten lighting.</p>"
"<p>Gives a warm highlight and mid-tone while adding a bit of coolness to the shadows - very similar to the process of bleaching a print and re-developing in a sepia toner.</p>"
msgid "With this button, you can pick the color from original image used to set <b>Shadow Tone</b> smooth curves point on Red, Green, Blue, and Luminosity channels."
msgid "With this button, you can pick the color from original image used to set <b>Middle Tone</b> smooth curves point on Red, Green, Blue, and Luminosity channels."
msgid "With this button, you can pick the color from original image used to set <b>Highlight Tone</b> smooth curves point on Red, Green, Blue, and Luminosity channels."
msgid "Enable this option if you want to preserve the aspect ratio of image. If enabled, the border width will be a percentage of the image size, else the border width will be in pixels."
msgid "Total smoothing power: if the Detail Factor sets the relative smoothing and the Anisotropy Factor the direction, the Smoothing Factor sets the overall effect."
msgid "<b>Function</b>: This function combines the original RGB channels with the desaturated blurred image. This function is used in each of the tonemapping stages. It can be linear or power. Basically, this function increases the values where both the original and blurred image's value are low and do the opposite on high values."
msgid "<b>Highlights saturation</b>: Usually the (perceived) saturation is increased. The user can choose to lower the saturation on original highlight and shadows from the image with these parameters."
msgid "<b>Shadow saturation</b>: Usually the (perceived) saturation is increased. The user can choose to lower the saturation on original highlight and shadows from the image with these parameters."
msgid "This value is the radius of the inner circle of the filter. In the inner circle the image is preserved. It is expressed as a multiple of the outer radius of the filter."
msgid "This value is the radius of the outer circle of the filter. Outside the outer circle the effect of the filter is at its maximum. It is expressed as a multiple of the diagonal of the image."
msgid "This is the camera maker description string found in image meta-data. This one is used to query and find relevant camera device information from Lensfun database."
msgid "This is the camera model description string found in image meta-data. This one is used to query and found relevant camera device information from Lensfun database."
msgid "This is the lens description string found in image meta-data. This one is used to query and found relevant lens information from Lensfun database."
msgid "Vignetting refers to an image darkening, mostly in the corners. Optical and natural vignetting can be canceled out with this option, whereas mechanical vignetting will not be cured."
msgid "Distortion refers to an image deformation, which is most pronounced towards the corners. These Seidel aberrations are known as pincushion and barrel distortions."
msgid "<b>Note: lens correction options depend of filters available in LensFun library. See <a href='http://lensfun.sourceforge.net'>LensFun project web site</a> for more information.</b>"
"<p>If the image's maximal counts are small, you can use the <b>linear</b> scale.</p>"
"<p><b>Logarithmic</b> scale can be used when the maximal counts are big; if it is used, all values (small and large) will be visible on the graph.</p>"
msgid "<b>Alpha</b>: display the alpha image-channel values. This channel corresponds to the transparency value and is supported by some image formats, such as PNG or TIF."
msgid "<b>Threshold</b>: Adjusts the threshold for denoising of the image in a range from 0.0 (none) to 10.0. The threshold is the value below which everything is considered noise."
msgstr ""
#. +> trunk5
#: core/libs/dimg/filters/nr/nrsettings.cpp:118
#, kde-format
msgid "<b>Softness</b>: This adjusts the softness of the thresholding (soft as opposed to hard thresholding). The higher the softness the more noise remains in the image."
msgstr ""
#. +> trunk5
#: core/libs/dimg/filters/nr/nrsettings.cpp:124
#, kde-format
msgid "Estimate Noise"
msgstr ""
#. +> trunk5
#: core/libs/dimg/filters/nr/nrsettings.cpp:125
#, kde-format
msgid "Compute automatically all noise reduction settings by a parse of noise contained in image."
msgid "This is the radius of the circular convolution. It is the most important parameter for using this tool. For most images the default value of 1.0 should give good results. Select a higher value when your image is very blurred."
msgid "Increasing the correlation may help to reduce artifacts. The correlation can range from 0-1. Useful values are 0.5 and values close to 1, e.g. 0.95 and 0.99. Using a high value for the correlation will reduce the sharpening effect of the tool."
msgid "Increasing the noise filter parameter may help to reduce artifacts. The noise filter can range from 0-1 but values higher than 0.1 are rarely helpful. When the noise filter value is too low, e.g. 0.0 the image quality will be very poor. A useful value is 0.01. Using a high value for the noise filter will reduce the sharpening effect of the tool."
msgid "This is the sharpness for the Gaussian convolution. Use this parameter when your blurring is of a Gaussian type. In most cases you should set this parameter to 0, because it causes nasty artifacts. When you use non-zero values, you will probably also have to increase the correlation and/or noise filter parameters."
msgid "This parameter determines the size of the transformation matrix. Increasing the matrix width may give better results, especially when you have chosen large values for circular or Gaussian sharpness."
msgid "<font color='red'><i>Warning: <a href='http://en.wikipedia.org/wiki/JPEG'>JPEG</a> is a lossy image compression format.</i></font>"
msgstr ""
#. +> trunk5
#: core/libs/dimg/loaders/jpegsettings.cpp:107
#, kde-format
msgid "Chroma subsampling:"
msgstr ""
#. +> trunk5
#: core/libs/dimg/loaders/jpegsettings.cpp:110
#, kde-format
msgid "4:4:4 (best quality)"
msgstr ""
#. +> trunk5
#: core/libs/dimg/loaders/jpegsettings.cpp:111
#, kde-format
msgid "4:2:2 (good quality)"
msgstr ""
#. +> trunk5
#: core/libs/dimg/loaders/jpegsettings.cpp:112
#, kde-format
msgid "4:2:0 (low quality)"
msgstr ""
#. +> trunk5
#: core/libs/dimg/loaders/jpegsettings.cpp:113
#, kde-format
msgid "4:1:1 (low quality)"
msgstr ""
#. +> trunk5
#: core/libs/dimg/loaders/jpegsettings.cpp:114
#, kde-format
msgid ""
"<p>Chroma subsampling reduces file size by taking advantage of the eye's lesser sensitivity to color resolution. How perceptible the difference is depends on the image - large photos will generally show no difference, while sharp, down-scaled pixel graphics may lose fine color detail.</p>"
"<p><b>4:4:4</b> - No chroma subsampling, highest quality but lowest compression.</p>"
"<p><b>4:2:2</b> - Chroma halved horizontally, average compression, average quality.</p>"
"<p><b>4:2:0</b> - Chroma quartered in 2x2 blocks, high compression but low quality.</p>"
"<p><b>4:1:1</b> - Chroma quartered in 4x1 blocks, high compression but low quality.</p>"
msgid "The database is not valid: the \"DBFaceVersion\" setting does not exist. The current database schema version cannot be verified. Try to start with an empty database. "
msgid "The database has been used with a more recent version of digiKam and has been updated to a database schema which cannot be used with this version. (This means this digiKam version is too old, or the database format is to recent.) Please use the more recent version of digiKam that you used before."
"Background color indicates the global image filter status, encompassing all filter settings from the right sidebar.\n"
"\n"
"NO COLOR: no filter is active, all items are visible.\n"
"RED: filtering is on, but no items match.\n"
"GREEN: filter(s) match(es) at least one item.\n"
"\n"
"Move mouse cursor over this text to see more details about active filters.\n"
"Press the Reset button from the right side to clear all filter settings.\n"
"Press the Settings button from the right side to open the filters panel."
msgstr ""
#. +> trunk5
#: core/libs/filters/filterstatusbar.cpp:96
#, kde-format
msgid "Reset all active filters"
msgstr ""
#. +> trunk5
#: core/libs/filters/filterstatusbar.cpp:102
#, kde-format
msgid "Open filter settings panel"
msgstr ""
#. +> trunk5
#: core/libs/filters/filterstatusbar.cpp:132
#, kde-format
msgid ""
"<br/>"
"<nobr><i>Text</i></nobr>"
msgstr ""
#. +> trunk5
#: core/libs/filters/filterstatusbar.cpp:137
#, kde-format
msgid ""
"<br/>"
"<nobr><i>Mime Type</i></nobr>"
msgstr ""
#. +> trunk5
#: core/libs/filters/filterstatusbar.cpp:142
#, kde-format
msgid ""
"<br/>"
"<nobr><i>Geolocation</i></nobr>"
msgstr ""
#. +> trunk5
#: core/libs/filters/filterstatusbar.cpp:147
#, kde-format
msgid ""
"<br/>"
"<nobr><i>Rating</i></nobr>"
msgstr ""
#. +> trunk5
#: core/libs/filters/filterstatusbar.cpp:152
#, kde-format
msgid ""
"<br/>"
"<nobr><i>Pick Labels</i></nobr>"
msgstr ""
#. +> trunk5
#: core/libs/filters/filterstatusbar.cpp:157
#, kde-format
msgid ""
"<br/>"
"<nobr><i>Color Labels</i></nobr>"
msgstr ""
#. +> trunk5
#: core/libs/filters/filterstatusbar.cpp:162
#, kde-format
msgid ""
"<br/>"
"<nobr><i>Tags</i></nobr>"
msgstr ""
#. +> trunk5
#: core/libs/filters/filterstatusbar.cpp:167
#, kde-format
msgid "<nobr><b>Active filters:</b></nobr>"
msgstr ""
#. +> trunk5
#: core/libs/filters/filterstatusbar.cpp:171
#, kde-format
msgid "<nobr><b>Active filter:</b></nobr>"
msgstr ""
#. +> trunk5
#: core/libs/filters/filterstatusbar.cpp:178
#, kde-format
msgid "No active filter"
msgstr ""
#. +> trunk5
#: core/libs/filters/filterstatusbar.cpp:187
#, kde-format
msgid "One active filter"
msgstr ""
#. +> trunk5
#: core/libs/filters/filterstatusbar.cpp:191
#, kde-format
msgid "1 active filter"
msgid_plural "%1 active filters"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5
#: core/libs/filters/geolocationfilter.cpp:37
#, kde-format
msgid "No geo filtering"
msgstr ""
#. +> trunk5
#: core/libs/filters/geolocationfilter.cpp:38
#, kde-format
msgid "Images with coordinates"
msgstr ""
#. +> trunk5
#: core/libs/filters/geolocationfilter.cpp:39
#, kde-format
msgid "Images without coordinates"
msgstr ""
#. +> trunk5
#: core/libs/filters/geolocationfilter.cpp:41
#, kde-format
msgid "Filter by geolocation"
msgstr ""
#. +> trunk5
#: core/libs/filters/geolocationfilter.cpp:42
#, kde-format
msgid "Select how geolocation should affect the images which are shown."
msgstr ""
#. +> trunk5
#: core/libs/filters/mimefilter.cpp:36
#, kde-format
msgid "All Files"
msgstr ""
#. +> trunk5
#: core/libs/filters/mimefilter.cpp:37
#: core/utilities/setup/album/setupmime.cpp:105
#, kde-format
msgid "Image Files"
msgstr ""
#. +> trunk5
#: core/libs/filters/mimefilter.cpp:38
#, kde-format
msgid "No RAW Files"
msgstr ""
#. +> trunk5
#: core/libs/filters/mimefilter.cpp:39
#, kde-format
msgid "JPEG Files"
msgstr ""
#. +> trunk5
#: core/libs/filters/mimefilter.cpp:40
#, kde-format
msgid "PNG Files"
msgstr ""
#. +> trunk5
#: core/libs/filters/mimefilter.cpp:41
#, kde-format
msgid "TIFF Files"
msgstr ""
#. +> trunk5
#: core/libs/filters/mimefilter.cpp:42
#, kde-format
msgid "DNG Files"
msgstr ""
#. +> trunk5
#: core/libs/filters/mimefilter.cpp:43
#, kde-format
msgid "RAW Files"
msgstr ""
#. +> trunk5
#: core/libs/filters/mimefilter.cpp:44
#: core/utilities/setup/album/setupmime.cpp:137
#, kde-format
msgid "Video Files"
msgstr ""
#. +> trunk5
#: core/libs/filters/mimefilter.cpp:45
#: core/utilities/setup/album/setupmime.cpp:172
#, kde-format
msgid "Audio Files"
msgstr ""
#. +> trunk5
#: core/libs/filters/mimefilter.cpp:46
#, kde-format
msgid "Raster Files"
msgstr ""
#. +> trunk5
#: core/libs/filters/mimefilter.cpp:48
#, kde-format
msgid "Filter by file type"
msgstr ""
#. +> trunk5
#: core/libs/filters/mimefilter.cpp:49
#, kde-format
msgid "Select the file types (MIME types) that you want shown. Note: \"Raster Files\" are formats from raster graphics editors, such as Photoshop, The Gimp, Krita, etc."
msgstr ""
#. +> trunk5
#: core/libs/filters/ratingfilter.cpp:75
#, kde-format
msgid "Select the rating value used to filter albums' contents. Use the context pop-up menu to set rating filter conditions."
msgstr ""
#. +> trunk5
#: core/libs/filters/ratingfilter.cpp:173
#, kde-format
msgid "Rating greater than or equal to %1."
msgstr ""
#. +> trunk5
#: core/libs/filters/ratingfilter.cpp:178
#, kde-format
msgid "Rating equal to %1."
msgstr ""
#. +> trunk5
#: core/libs/filters/ratingfilter.cpp:183
#, kde-format
msgid "Rating less than or equal to %1."
msgstr ""
#. +> trunk5
#: core/libs/filters/ratingfilter.cpp:227
#, kde-format
msgid "Rating Filter Options"
msgstr ""
#. +> trunk5
#: core/libs/filters/ratingfilter.cpp:232
#, kde-format
msgid "Greater Than or Equals Condition"
msgstr ""
#. +> trunk5
#: core/libs/filters/ratingfilter.cpp:234
#, kde-format
msgid "Equals Condition"
msgstr ""
#. +> trunk5
#: core/libs/filters/ratingfilter.cpp:236
#, kde-format
msgid "Less Than or Equals Condition"
msgstr ""
#. +> trunk5
#: core/libs/filters/ratingfilter.cpp:239
#, kde-format
msgid "Exclude Items Without Rating"
msgstr ""
#. +> trunk5
#: core/libs/filters/textfilter.cpp:81
#, kde-format
msgid "Text quick filter (search)"
msgstr ""
#. +> trunk5
#: core/libs/filters/textfilter.cpp:82
#, kde-format
msgid "Enter search patterns to quickly filter this view on item names, captions (comments), and tags"
msgstr ""
#. +> trunk5
#: core/libs/filters/textfilter.cpp:86
#, kde-format
msgid "Text Search Fields"
msgstr ""
#. +> trunk5
#: core/libs/filters/textfilter.cpp:89
#, kde-format
msgid "Defines which fields to search for the text in."
msgid "Enter the text used to create tags here. '/' can be used to create a hierarchy of tags. ',' can be used to create more than one hierarchy at the same time."
msgid "Enter the Informative Provider Reference here. I.P.R is a name registered with the XMP/NAA, identifying the provider that provides an indicator of the content. The default value for the I.P.R is \"XMP\" if a standard Reference Code is used."
msgstr ""
#. +> trunk5
#: core/libs/template/subjectedit.cpp:58
#, kde-format
msgid "Enter the Subject Reference Number here. Provides a numeric code to indicate the Subject Name plus optional Subject Matter and Subject Detail Names in the language of the service. Subject Reference is a number from the range 01000000 to 17999999 and represent a language independent international reference to a Subject. A Subject is identified by its Reference Number and corresponding Names taken from a standard lists given by XMP/NAA. If a standard reference code is used, these lists are the English language reference versions. This field is limited to 8 digit code."
msgstr ""
#. +> trunk5
#: core/libs/template/subjectedit.cpp:71
#, kde-format
msgid "Enter the Subject Name here. English language is used if you selected a standard XMP/NAA reference code."
msgstr ""
#. +> trunk5
#: core/libs/template/subjectedit.cpp:75
#, kde-format
msgid "Enter the Subject Matter Name here. English language is used if you selected a standard XMP/NAA reference code."
msgstr ""
#. +> trunk5
#: core/libs/template/subjectedit.cpp:79
#, kde-format
msgid "Enter the Subject Detail Name here. English language is used if you selected a standard XMP/NAA reference code."
msgstr ""
#. +> trunk5
#: core/libs/template/templatelist.cpp:80
#, kde-format
msgid "Here you can see the metadata template list managed by digiKam."
msgstr ""
#. +> trunk5
#: core/libs/template/templatelist.cpp:84
#, kde-format
msgid "Authors"
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:121
#, kde-format
msgid "Author Names:"
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:124
#, kde-format
msgid "Enter the names of the photograph's creators. Use semi-colons as separator here."
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:126
#, kde-format
msgid ""
"<p>This field should contain the names of the persons who created the photograph. If it is not appropriate to add the name of the photographer (for example, if the identity of the photographer needs to be protected) the name of a company or organization can also be used. Once saved, this field should not be changed by anyone. "
"<p>To enter more than one name, use <b>semi-colons as separators</b>.</p>"
"<p>With IPTC, this field is limited to 32 ASCII characters.</p>"
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:135
#, kde-format
msgid "Authors' Positions:"
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:138
#, kde-format
msgid "Enter the job titles of the authors here."
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:140
#, kde-format
msgid ""
"<p>This field should contain the job titles of the authors. Examples might include titles such as: Staff Photographer, Freelance Photographer, or Independent Commercial Photographer. Since this is a qualifier for the Author field, the Author field must also be filled out.</p>"
"<p>With IPTC, this field is limited to 32 ASCII characters.</p>"
"<p>(synonymous to Provider): Use the Provider field to identify who is providing the photograph. This does not necessarily have to be the author. If a photographer is working for a news agency such as Reuters or the Associated Press, these organizations could be listed here as they are \"providing\" the image for use by others. If the image is a stock photograph, then the group (agency) involved in supplying the image should be listed here.</p>"
"<p>With IPTC, this field is limited to 32 ASCII characters.</p>"
"In Europe you would use: Copyright {Year} {Copyright owner}, all rights reserved. \n"
"In Japan, for maximum protection, the following three items should appear in the copyright field of the IPTC Core: (a) the word, Copyright; (b) year of the first publication; and (c) name of the author. You may also wish to include the phrase \"all rights reserved\".</p>"
"<p>With XMP, you can include more than one copyright string using different languages.</p>"
"<p>With IPTC, this field is limited to 128 ASCII characters.</p>"
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:186
#, kde-format
msgid "Right Usage Terms:"
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:188
#, kde-format
msgid "Enter the list of instructions on how a resource can be legally used here."
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:189
#, kde-format
msgid ""
"<p>The Right Usage Terms field should be used to list instructions on how a resource can be legally used."
"<p>With XMP, you can include more than one right usage terms string using different languages.</p>"
msgid "Enter the original owner of the photograph here."
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:202
#, kde-format
msgid ""
"<p>The Source field should be used to identify the original owner or copyright holder of the photograph. The value of this field should never be changed after the information is entered following the image's creation. While not yet enforced by the custom panels, you should consider this to be a \"write-once\" field. The source could be an individual, an agency, or a member of an agency. To aid in later searches, it is suggested to separate any slashes \"/\" with a blank space. Use the form \"photographer / agency\" rather than \"photographer/agency.\" Source may also be different from Creator and from the names listed in the Copyright Notice.</p>"
"<p>With IPTC, this field is limited to 32 ASCII characters.</p>"
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:214
#: core/libs/template/templateviewer.cpp:167
#, kde-format
msgid "Instructions:"
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:217
#, kde-format
msgid "Enter the editorial notice here."
msgstr ""
#. +> trunk5
#: core/libs/template/templatepanel.cpp:219
#, kde-format
msgid ""
"<p>The Instructions field should be used to list editorial instructions concerning the use of photograph.</p>"
"<p>With IPTC, this field is limited to 256 ASCII characters.</p>"
msgid "Minimal version number required for this binary is %1"
msgstr ""
#. +> trunk5
#: core/libs/widgets/files/dbinarysearch.cpp:104
#, kde-format
msgid "Find"
msgstr ""
#. +> trunk5
#: core/libs/widgets/files/dbinarysearch.cpp:106
#, kde-format
msgid " or <a href=\"%1\">download</a>"
msgstr ""
#. +> trunk5
#: core/libs/widgets/files/dbinarysearch.cpp:131
#, kde-format
msgid ""
"<qt>"
"<p><font color=\"red\"><b>Warning:</b> Some necessary binaries have not been found on your system. If you have these binaries installed, please click the 'Find' button to locate them on your system, otherwise please download and install them to proceed.</font></p>"
"</qt>"
msgstr ""
#. +> trunk5
#: core/libs/widgets/files/dbinarysearch.cpp:165
#, kde-format
msgid "A development version has been detect. There is no guarantee on the behavior of this binary."
"<para>If enabled, all RAW files will be decoded in 16-bit color depth using a linear gamma curve. To prevent dark picture rendering in the editor, it is recommended to use Color Management in this mode.</para>"
"<para>If disabled, all RAW files will be decoded in 8-bit color depth with a BT.709 gamma curve and a 99th-percentile white point. This mode is faster than 16-bit decoding.</para>"
"<para>The default is to assume that all green pixels are the same. If even-row green pixels are more sensitive to ultraviolet light than odd-row this difference causes a mesh pattern in the output; using this option solves this problem with minimal loss of detail.</para>"
"<para>To resume, this option blurs the image a little, but it eliminates false 2x2 mesh patterns with VNG quality method or mazes with AHD quality method.</para>"
"<para>For Fuji Super CCD cameras, show the image tilted 45 degrees. For cameras with non-square pixels, do not stretch the image to its correct aspect ratio. In any case, this option guarantees that each output pixel corresponds to one RAW pixel.</para>"
"<para>Select here the demosaicing method to use when decoding RAW images. A demosaicing algorithm is a digital image process used to interpolate a complete image from the partial raw data received from the color-filtered image sensor, internal to many digital cameras, in form of a matrix of colored pixels. Also known as CFA interpolation or color reconstruction, another common spelling is demosaicing. The following methods are available for demosaicing RAW images:</para>"
"<para>"
"<list>"
"<item><emphasis strong='true'>Bilinear</emphasis>: use high-speed but low-quality bilinear interpolation (default - for slow computers). In this method, the red value of a non-red pixel is computed as the average of the adjacent red pixels, and similarly for blue and green.</item>"
"<item><emphasis strong='true'>VNG</emphasis>: use Variable Number of Gradients interpolation. This method computes gradients near the pixel of interest and uses the lower gradients (representing smoother and more similar parts of the image) to make an estimate.</item>"
"<item><emphasis strong='true'>PPG</emphasis>: use Patterned-Pixel-Grouping interpolation. Pixel Grouping uses assumptions about natural scenery in making estimates. It has fewer color artifacts on natural images than the Variable Number of Gradients method.</item>"
"<item><emphasis strong='true'>AHD</emphasis>: use Adaptive Homogeneity-Directed interpolation. This method selects the direction of interpolation so as to maximize a homogeneity metric, thus typically minimizing color artifacts.</item>"
"<item><emphasis strong='true'>DCB</emphasis>: DCB interpolation from linuxphoto.org project.</item>"
"<item><emphasis strong='true'>AHD v2</emphasis>: modified AHD interpolation using Variance of Color Differences method.</item>"
"<item><emphasis strong='true'>AFD</emphasis>: Adaptive Filtered Demosaicing interpolation through 5 pass median filter from PerfectRaw project.</item>"
"<item><emphasis strong='true'>VCD</emphasis>: Variance of Color Differences interpolation.</item>"
"<item><emphasis strong='true'>VCD & AHD</emphasis>: Mixed demosaicing between VCD and AHD.</item>"
"<item><emphasis strong='true'>LMMSE</emphasis>: color demosaicing via directional linear minimum mean-square error estimation interpolation from PerfectRaw.</item>"
"<item><emphasis strong='true'>AMaZE</emphasis>: Aliasing Minimization interpolation and Zipper Elimination to apply color aberration removal from RawTherapee project.</item>"
"</list>"
"</para>"
"<para>Note: some methods can be unavailable if RAW decoder have been built without extension packs.</para>"
"<para>Set here the passes used by the median filter applied after interpolation to Red-Green and Blue-Green channels.</para>"
"<para>This setting is only available for specific Quality options: <emphasis strong='true'>Bilinear</emphasis>, <emphasis strong='true'>VNG</emphasis>, <emphasis strong='true'>PPG</emphasis>, <emphasis strong='true'>AHD</emphasis>, <emphasis strong='true'>DCB</emphasis>, and <emphasis strong='true'>VCD & AHD</emphasis>.</para>"
"<item><emphasis strong='true'>Default D65</emphasis>: Use a standard daylight D65 white balance.</item>"
"<item><emphasis strong='true'>Camera</emphasis>: Use the white balance specified by the camera. If not available, reverts to default neutral white balance.</item>"
"<item><emphasis strong='true'>Automatic</emphasis>: Calculates an automatic white balance averaging the entire image.</item>"
"<item><emphasis strong='true'>Manual</emphasis>: Set a custom temperature and green level values.</item>"
msgid "<para>If enabled, images with overblown channels are processed much more accurately, without 'pink clouds' (and blue highlights under tungsten lamps).</para>"
"<para>Use a specific black point value to decode RAW pictures. If you set this option to off, the Black Point value will be automatically computed.</para>"
"<para>Use a specific white point value to decode RAW pictures. If you set this option to off, the White Point value will be automatically computed.</para>"
"<para>Select here the noise reduction method to apply during RAW decoding.</para>"
"<para>"
"<list>"
"<item><emphasis strong='true'>None</emphasis>: no noise reduction.</item>"
"<item><emphasis strong='true'>Wavelets</emphasis>: wavelets correction to erase noise while preserving real detail. It is applied after interpolation.</item>"
"<item><emphasis strong='true'>FBDD</emphasis>: Fake Before Demosaicing Denoising noise reduction. It is applied before interpolation.</item>"
"<item><emphasis strong='true'>CFA Line Denoise</emphasis>: Banding noise suppression. It is applied after interpolation.</item>"
"<item><emphasis strong='true'>Impulse Denoise</emphasis>: Impulse noise suppression. It is applied after interpolation.</item>"
"<para>If this option is turned on, it will try to shift image channels slightly and evaluate Chromatic Aberration change. Note that if you shot blue-red pattern, the method may fail. In this case, disable this option and tune manually color factors.</para>"
"<para>Select here the output color space used to decode RAW data.</para>"
"<para>"
"<list>"
"<item><emphasis strong='true'>Raw (linear)</emphasis>: in this mode, no output color space is used during RAW decoding.</item>"
"<item><emphasis strong='true'>sRGB</emphasis>: this is an RGB color space, created cooperatively by Hewlett-Packard and Microsoft. It is the best choice for images destined for the Web and portrait photography.</item>"
"<item><emphasis strong='true'>Adobe RGB</emphasis>: this color space is an extended RGB color space, developed by Adobe. It is used for photography applications such as advertising and fine art.</item>"
"<item><emphasis strong='true'>Wide Gamut</emphasis>: this color space is an expanded version of the Adobe RGB color space.</item>"
"<item><emphasis strong='true'>Pro-Photo</emphasis>: this color space is an RGB color space, developed by Kodak, that offers an especially large gamut designed for use with photographic outputs in mind.</item>"
"<item><emphasis strong='true'>Custom</emphasis>: use a custom output color space profile.</item>"
msgid "Here you can switch between fixed font size and font size to be calculated dynamically and adjusted to changing environment (e.g. widget dimensions, paper size)."
"<p><b>Perceptual intent</b> causes the full gamut of the image to be compressed or expanded to fill the gamut of the destination device, so that gray balance is preserved but colorimetric accuracy may not be preserved.</p>"
"<p>In other words, if certain colors in an image fall outside of the range of colors that the output device can render, the image intent will cause all the colors in the image to be adjusted so that the every color in the image falls within the range that can be rendered and so that the relationship between colors is preserved as much as possible.</p>"
"<p>This intent is most suitable for display of photographs and images, and is the default intent.</p>"
"</li>"
"<li>"
"<p><b>Absolute Colorimetric intent</b> causes any colors that fall outside the range that the output device can render to be adjusted to the closest color that can be rendered, while all other colors are left unchanged.</p>"
"<p>This intent preserves the white point and is most suitable for spot colors (Pantone, TruMatch, logo colors, ....)</p>"
"</li>"
"<li>"
"<p><b>Relative Colorimetric intent</b> is defined such that any colors that fall outside the range that the output device can render are adjusted to the closest color that can be rendered, while all other colors are left unchanged. Proof intent does not preserve the white point.</p>"
"</li>"
"<li>"
"<p><b>Saturation intent</b> preserves the saturation of colors in the image at the possible expense of hue and lightness.</p>"
"<p>Implementation of this intent remains somewhat problematic, and the ICC is still working on methods to achieve the desired effects.</p>"
"<p>This intent is most suitable for business graphics such as charts, where it is more important that the colors be vivid and contrast well with each other rather than a specific color.</p>"
"<p>This area contains a CIE or chromaticity diagram. A CIE diagram is a representation of all the colors that a person with normal vision can see. This is represented by the colored sail-shaped area. In addition you will see a triangle that is superimposed on the diagram outlined in white. This triangle represents the outer boundaries of the color space of the device that is characterized by the inspected profile. This is called the device gamut.</p>"
"<p>In addition there are black dots and yellow lines on the diagram. Each black dot represents one of the measurement points that were used to create this profile. The yellow line represents the amount that each point is corrected by the profile, and the direction of this correction.</p>"
"<p>The ICC profile path seems to be invalid.</p>"
"<p>If you want to set it now, select \"Yes\", otherwise select \"No\". In this case, \"Color Management\" feature will be disabled until you solve this issue</p>"
msgid "<p><a href='http://en.wikipedia.org/wiki/Exif'>EXIF</a> - a standard used by most digital cameras today to store technical information (like aperture and shutter speed) about an image.</p>"
msgid "<p><a href='http://en.wikipedia.org/wiki/IPTC_Information_Interchange_Model'>IPTC</a> - an older standard used in digital photography to store photographer information in images.</p>"
msgid "<p><a href='http://en.wikipedia.org/wiki/Extensible_Metadata_Platform'>XMP</a> - a new standard used in digital photography, designed to replace IPTC.</p>"
msgid "This list shows the results for your renaming pattern. Red items indicate a name collision, either because the new name is equal to the current name, or because the name has already been assigned to another item."
msgid "<p>Enter your renaming pattern here. Use the access buttons to quickly add renaming options and modifiers. For further explanation, use the information button.</p>"
msgid "<p>Add a modifier to a renaming option. To activate this button, place the cursor behind a renaming option or an already assigned modifier.</p>"
"<p>This assistant will guide you to create and print a calendar with a selection of images taken from your collection.</p>"
"<p>This tool will also permit to set specific dates on your calendar using external data event files as <a href='http://en.wikipedia.org/wiki/VCalendar'>vCalendar</a>, and <a href='http://en.wikipedia.org/wiki/Icalendar'>iCalendar</a> formats.</p>"
msgid "Set automatic level selection (maximized) for pyramid blending, i.e. optimize image features (contrast, saturation, . . .) to be as global as possible."
msgid "Set the number of levels for pyramid blending. Balances towards local features (small number) or global features (high number). Additionally, a low number trades off quality of results for faster execution time and lower memory usage."
msgid "Force hard blend masks without averaging on finest scale. This is only useful for focus stacks with thin and high contrast features. It improves sharpness at the expense of increased noise."
msgid "Sets the relative weight of high-contrast pixels. Increasing this weight makes pixels with neighboring differently colored pixels contribute more to the final output. Particularly useful for focus stacks."
msgid "Use Color Appearance Modelling (CIECAM02) to render detailed colors. Your input files should have embedded ICC profiles. If no ICC profile is present, sRGB color space will be assumed. The difference between using this option and default color blending algorithm is very slight, and will be most noticeable when you need to blend areas of different primary colors together."
"<p>This tool fuses bracketed images with different exposure to make pseudo <a href='http://en.wikipedia.org/wiki/High_dynamic_range_imaging'>HDR image</a>.</p>"
"<p>It can also be used to <a href='https://en.wikipedia.org/wiki/Focus_stacking'>merge focus bracketed stack</a> to get a single image with increased depth of field.</p>"
"<p>This assistant will help you to configure how to import images before merging them to a single one.</p>"
"<p>Bracketed images must be taken with the same camera, in the same conditions, and if possible using a tripod.</p>"
"<p>For more information, please take a look at <a href='http://en.wikipedia.org/wiki/Bracketing'>this page</a></p>"
"<p>Now, we will pre-process bracketed images before fusing them.</p>"
"<p>To perform auto-alignment, the <b>%1</b> program from the <a href='%2'>%3</a> project will be used. Alignment must be performed if you have not used a tripod to take bracketed images. Alignment operations can take a while.</p>"
"<p>Pre-processing operations include Raw demosaicing. Raw images will be converted to 16-bit sRGB images with auto-gamma.</p>"
msgid "<p><i>Note:</i> removable media (such as USB drives or DVDs) and remote file systems (such as NFS, or Samba mounted with cifs/smbfs) are supported.</p>"
"<p>Set here if you want to store the information assigned to items in digiKam in the files' metadata, to improve interoperability with other photo management programs:</p>"
"<h1><b>Migrate configuration and metadata from digiKam 4</b></h1>"
"</p>"
"<p>You can choose here if you want to use the configuration and albums from digiKam 4 in new digiKam. Please note the following warnings:</p>"
"<p>Migration is done <b>at your own risk</b>. digiKam developers do not recommend it and do not support it. On the other hand, creating a new configuration might result in loss of tags and other metadata that was not embedded inside the pictures and was only available in digiKam 4's database.</p>"
"<p>In either case you are recommended to backup the configuration files and databases before proceeding.</p>"
"<p><i>Note:</i> using a preview is always faster than using the editor, especially when checking a series of shots. However, you cannot change or fix the image in preview mode. Note that if you want to compare images quickly, it is often better to use the light table: images can be displayed side-by-side, and synchronized zooming and panning can be performed.</p>"
"<p><i>Note:</i> loading a reduced version of an image is faster but can differ from the original, especially with Raw. In this case, a JPEG version of Raw pre-processed by camera is loaded, instead of the real image data. This JPEG image is embedded in the file metadata and is used by the camera to display a Raw image faster to a TV screen.</p>"
"<p><i>Note:</i> the Raw import tool is designed for advanced users who want to have the best control over the image. This requires more time in your workflow.</p>"
"<p>Congratulations. Your minimal setup is done.</p>"
"<p>Remember, you can customize more settings using the digiKam configuration panel. To learn more about the digiKam world, we recommend reading the <b>digiKam handbook</b> using the <b>Help/Handbook</b> menu entry (you need to install the separate digiKam documentation package.) You can also read the manual online from the <a href='http://www.digikam.org/docs'>digikam.org website</a>.</p>"
"<p>Press <b>Finish</b> to close this assistant. digiKam will scan your collection to register all albums in the database. Items including in albums are collected after startup stage in background.</p>"
"<p><i>Note:</i> depending on your collection size, this operation can take a while. If you cancel the scanning operation, it will start again in the next digiKam session.</p>"
"<p>When scanning has completed, at next start-up, digiKam will only check your collection to identify new albums - which is much faster. You can force digiKam to scan for new items manually using the <b>Tools->Maintenance->Scan for new items</b> menu entry.</p>"
"<p><i>Note:</i> tooltips show photograph and digiKam metadata on the fly, as the mouse moves over items. This can be useful when selecting items. Tooltips are displayed in the album folder view, album icon view, camera icon view, batch queue list, and thumb bar. From the digiKam configuration dialog, you can customize the contents of these tooltips and the fonts used.</p>"
"<p>You can ignore the following if you use digiKam for the first time:</p>"
"<p><b>Transition from digiKam 4</b></p>"
"<p>Configuration files from digiKam 4 are not migrated. The old database can still be used, you just need to choose the same locations for collections and database in the following dialogs. It is recommended to create a backup of your database before proceeding.</p>"
"<p>The new location for configuration files is %1 (old %2). There are unresolved problems reported when re-using old configuration files, so it is not recommended to do it for the moment, and at your own risk.</p>"
msgid "<b>JPEG output</b>: Using JPEG output, the panorama file will be smaller at the cost of information loss during compression. This is the easiest way to share the result, or print it online or in a shop."
msgid "<b>TIFF output</b>: Using TIFF output, you get the same color depth than your original photos using RAW images at the cost of a bigger panorama file."
msgid "<b>File name template</b>: Set here the base name of the files that will be saved. For example, if your template is <i>panorama</i> and if you chose a JPEG output, then your panorama will be saved with the name <i>panorama.jpg</i>. If you choose to save also the project file, it will have the name <i>panorama.pto</i>."
msgid "<b>Save project file</b>: You can keep the project file generated to stitch your panorama for further tweaking within <a href=\"http://hugin.sourceforge.net/\">Hugin</a> by checking this. This is useful if you want a different projection, modify the horizon or the center of the panorama, or modify the control points to get better results."
"<p><font color=\"orange\"><b>Warning:</b> One or more converted raw files already exists (they will be skipped during the copying process).</font></p>"
"<p>Congratulations. Your images are stitched into a panorama.</p>"
"<p>Your panorama will be created to the directory:<br />"
"<b>%1</b><br />"
"once you press the <i>Finish</i> button, with the name set below.</p>"
"<p>If you choose to save the project file, and if your images were raw images then the converted images used during the stitching process will be copied at the same time (those are TIFF files that can be big).</p>"
msgid "<b>Detect moving skies</b>: During the control points selection and matching, this option discards any points that are associated to a possible cloud. This is useful to prevent moving clouds from altering the control points matching process."
"<p>Now, we will pre-process images before stitching them.</p>"
"<p>Pre-processing operations include Raw demosaicing. Raw images will be converted to 16-bit sRGB images with auto-gamma.</p>"
"<p>Pre-processing also include a calculation of some control points to match overlaps between images. For that purpose, the <b>%1</b> program from the <a href='%2'>%3</a> project will be used.</p>"
"<p>You can generate quickly a <a href='https://en.wikipedia.org/wiki/Time-lapse_photography'>Time-lapse</a> movie from images</p>"
"<p>captured with a tripod mounted camera controlled with an <a href='https://en.wikipedia.org/wiki/Intervalometer#Photography'>intervalometer</a>.</p>"
"<p></p>"
"<p>You can also create a video presentation with transition</p>"
"<p>effects and audio tracks to show on a TV screen.</p>"
msgid "<i>An effect is an visual panning or zooming applied while an image is displayed. The effect duration will follow the number of frames used to render the image on video stream.</i>"
msgid "<i>A transition is an visual effect applied between two images. For some effects, the duration can depend of random values and can change while the slideshow.</i>"
msgid "Please follow the instructions in the browser window. When done, copy the Internet address from your browser into the textbox below and press \"OK\"."
msgid "Please follow the instructions in the browser. After logging in and authorizing the application, copy the code from the browser, paste it in the textbox below, and click OK."
msgid "The textbox is empty, please enter the code from the browser in the textbox. To complete the authentication click \"Change Account\", or \"Start Upload\" to authenticate again."
msgid "Face detection is a time-consuming task. You can choose if you wish to employ all processor cores on your system, or work in the background only on one core. Warning: this features still experimental and it is disabled by default."
msgid "Use this option to restrict the duplicate search with some criteria, as to limit search to the album of reference image, or to exclude the album of reference image of the search."
msgid "Image fingerprints have not yet been generated for your collection. The Similarity Search Tools will not be operational without pre-generated fingerprints. Please generate the fingerprints first."
msgid "Sets the maximum time difference to interpolate GPX file points to image time data. If the time difference exceeds this setting, no match will be attempted."
msgid "Sets the maximum time difference from a GPS track point to the image time to be matched. If the time difference exceeds this setting, no match will be attempted."
"You have enabled writing to sidecar files for metadata storage in the host application, but not for reading. This means that any metadata stored in the sidecar files will be overwritten here.\n"
"Please enable reading of sidecar files in the host application or continue at your own risk."
msgid "<p>Select the profile for your output device (usually, your printer). This profile will be used to do a soft proof, so you will be able to preview how an image will be rendered via an output device.</p>"
msgid "Cannot open the specified working space profile (\"%1\"). No color transformation will be applied. Please check the color management configuration in digiKam's setup."
msgid "With this button, you can pick the color from the original image used to set <b>Shadow Tone</b> input levels on the Red, Green, Blue, and Luminosity channels."
msgid "With this button, you can pick the color from the original image used to set <b>Middle Tone</b> input levels on the Red, Green, Blue, and Luminosity channels."
msgid "With this button, you can pick the color from the original image used to set <b>Highlight Tone</b> input levels on the Red, Green, Blue, and Luminosity channels."
"<p>This option maximizes the tonal range in the Red, Green, and Blue channels. It searches the image shadow and highlight limit values and adjusts the Red, Green, and Blue channels to a full histogram range.</p>"
"<p>This option scales brightness values across the active image so that the darkest point becomes black, and the brightest point becomes as bright as possible without altering its hue. This is often a \"magic fix\" for images that are dim or washed out.</p>"
"<p>This option adjusts the brightness of colors across the active image so that the histogram for the value channel is as nearly as possible flat, that is, so that each possible brightness value appears at about the same number of pixels as each other value. Sometimes Equalize works wonderfully at enhancing the contrasts in an image. Other times it gives garbage. It is a very powerful operation, which can either work miracles on an image or destroy it.</p>"
"<p>This option enhances the contrast and brightness of the RGB values of an image by stretching the lowest and highest values to their fullest range, adjusting everything in between.</p>"
"<p>This option enhances the contrast and brightness of the RGB values of an image to calculate optimal exposition and black level using image histogram properties.</p>"
msgid "With this button, you can pick the color of the orange mask of the scanned color negative. It represents white point of the negative, or the darkest black tone of the positive image after inversion. It is also the reference point for applying the film profile."
msgid "If you press this button, the white point is calculated from the image data automatically. This function requires to have some residual orange mask around the exposed area of the negative."
msgid "Move the slider to higher values until maximum brightness is achieved without clipping any color channel. Use the output histogram to evaluate each channel."
msgid "A percent of 0 has no effect, values above 0 represent a factor for mixing the destination color with source color this is done radially i.e. the inner part of the brush radius is totally from source and mixing with destination is done gradually till the outer part of the circle."
"<p>Select the blurring effect to apply to image.</p>"
"<p><b>Zoom Blur</b>: blurs the image along radial lines starting from a specified center point. This simulates the blur of a zooming camera.</p>"
"<p><b>Radial Blur</b>: blurs the image by rotating the pixels around the specified center point. This simulates the blur of a rotating camera.</p>"
"<p><b>Far Blur</b>: blurs the image by using far pixels. This simulates the blur of an unfocalized camera lens.</p>"
"<p><b>Motion Blur</b>: blurs the image by moving the pixels horizontally. This simulates the blur of a linear moving camera.</p>"
"<p><b>Softener Blur</b>: blurs the image softly in dark tones and hardly in light tones. This gives images a dreamy and glossy soft focus effect. It is ideal for creating romantic portraits, glamour photographs, or giving images a warm and subtle glow.</p>"
"<p><b>Shake Blur</b>: blurs the image by shaking randomly the pixels. This simulates the blur of a random moving camera.</p>"
"<p><b>Focus Blur</b>: blurs the image corners to reproduce the astigmatism distortion of a lens.</p>"
"<p><b>Smart Blur</b>: finds the edges of color in your image and blurs them without muddying the rest of the image.</p>"
"<p><b>Frost Glass</b>: blurs the image by randomly disperse light coming through a frosted glass.</p>"
"<p><b>Mosaic</b>: divides the photograph into rectangular cells and then recreates it by filling those cells with average pixel value.</p>"
"<p>Note: if you have previously selected an area in the editor, this will be unaffected by the filter. You can use this method to disable the Raindrops effect on a human face, for example.</p>"
msgid "Click on this button to draw zones marking which areas of the image are less important. These zones will be deleted when reducing the picture, or duplicated when enlarging the picture."
msgid "Use this value to give a negative bias to the seams which are not straight. May be useful to prevent distortions in some situations, or to avoid artifacts from pixel skipping (it is better to use low values in such case). This setting applies to the whole selected layer if no rigidity mask is used. Note: the bias is proportional to the difference in the transversal coordinate between each two successive points, elevated to the power of 1.5, and summed up for the whole seam."
msgid "This option lets you choose the maximum transversal step that the pixels in the seams can take. In the standard algorithm, corresponding to the default value step = 1, each pixel in a seam can be shifted by at most one pixel with respect to its neighbors. This implies that the seams can form an angle of at most 45 degrees with respect to their base line. Increasing the step value lets you overcome this limit, but may lead to the introduction of artifacts. In order to balance the situation, you can use the rigidity setting."
msgid "During the carving process, at each step the optimal seam to be carved is chosen based on the relevance value for each pixel. However, in the case where two seams are equivalent (which may happen, for instance, when large portions of the image have the same color), the algorithm always chooses the seams from one side. In some cases, this can pose problems, e.g. an object centered in the original image might not be centered in the resulting image. In order to overcome this effect, this setting allows the favored side to be switched automatically during rescaling, at the cost of slightly worse performance."
msgid "This is the free rotation operation preview. If you move the mouse cursor on this preview, a vertical and horizontal dashed line will be drawn to guide you in adjusting the free rotation correction. Release the left mouse button to freeze the dashed line's position."
msgid "This is the perspective transformation operation preview. You can use the mouse for dragging the corner to adjust the perspective transformation area."
"<p>Select your constrained aspect ratio for cropping. Aspect Ratio Crop tool uses a relative ratio. That means it is the same if you use centimeters or inches and it does not specify the physical size.</p>"
"<p>You can see below a correspondence list of traditional photographic paper sizes and aspect ratio crop:</p>"
"<p><b>8:5</b>: common wide-screen monitor (as 1680x1050)</p>"
"<p><b>2:1</b>, <b>3:1</b>, <b>4:1</b>: common panoramic sizes</p>"
"<p><b>16:9</b>: common tv-screen (as HDTV or Full-HD)</p>"
"<p>The <b>Golden Ratio</b> is 1:1.618. A composition following this rule is considered visually harmonious but can be unadapted to print on standard photographic paper.</p>"
"<p>The <b>Current Aspect Ratio</b> takes aspect ratio from the currently opened image.</p>"
msgid "This is the shear operation preview. If you move the mouse cursor on this preview, a vertical and horizontal dashed line will be drawn to guide you in adjusting the shear correction. Release the left mouse button to freeze the dashed line's position."
msgid "If this option is enabled, the preview area will split vertically. A contiguous area of the image will be shown, with one half from the original image, the other half from the target image."
msgid "If this option is enabled, the preview area will split horizontally. A contiguous area of the image will be shown, with one half from the original image, the other half from the target image."
msgid "If this option is enabled, the preview area will split vertically. The same part of the original and the target image will be shown side by side."
msgid "If this option is enabled, the preview area will split horizontally. The same part of the original and the target image will be shown side by side."
msgid "For more information about the <b>Mounted Camera</b> driver, please read the <b>Supported Digital Still Cameras</b> section in the digiKam manual."
msgid "Set how digiKam will rename files as they are downloaded."
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:241
#, kde-format
msgid "File Renaming Options"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:247
#, kde-format
msgid "Auto-creation of Albums"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:253
#, kde-format
msgid "On the Fly Operations (JPEG only)"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:259
#, kde-format
msgid "DNG Convert Options"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:265
#, kde-format
msgid "Scripting"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:284
#, kde-format
msgctxt "@action Cancel process"
msgid "Cancel"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:291
#, kde-format
msgctxt "@action Information about camera"
msgid "Information"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:298
#, kde-format
msgctxt "@action Capture photo from camera"
msgid "Capture"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:310
#, kde-format
msgctxt "@action:inmenu"
msgid "Select All"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:318
#, kde-format
msgctxt "@action:inmenu"
msgid "Select None"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:326
#, kde-format
msgctxt "@action:inmenu"
msgid "Invert Selection"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:334
#, kde-format
msgctxt "@action:inmenu"
msgid "Select New Items"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:341
#, kde-format
msgctxt "@action:inmenu"
msgid "Select Locked Items"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:349
#, kde-format
msgctxt "@title:menu"
msgid "Download"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:354
#, kde-format
msgctxt "@action"
msgid "Download New"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:361
#, kde-format
msgctxt "@action"
msgid "Download Selected"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:368
#, kde-format
msgctxt "@action"
msgid "Download All"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:376
#, kde-format
msgctxt "@action"
msgid "Download && Delete New"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:384
#, kde-format
msgctxt "@action"
msgid "Download && Delete Selected"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:392
#, kde-format
msgctxt "@action"
msgid "Download && Delete All"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:399
#, kde-format
msgctxt "@action"
msgid "Upload..."
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:407
#, kde-format
msgctxt "@action"
msgid "Toggle Lock"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:415
#, kde-format
msgctxt "@action"
msgid "Mark as downloaded"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:422
#, kde-format
msgctxt "@title:menu"
msgid "Delete"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:427
#, kde-format
msgctxt "@action"
msgid "Delete Selected"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:435
#, kde-format
msgctxt "@action"
msgid "Delete All"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:441
#, kde-format
msgctxt "@action"
msgid "Delete New"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:449
#, kde-format
msgctxt "@title:group"
msgid "Views"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:460
#, kde-format
msgctxt "@action View the selected image"
msgid "Preview Item"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:480
#, kde-format
msgctxt "@title:menu"
msgid "&Sort Items"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:481
#, kde-format
msgctxt "@info:whatsthis"
msgid "The value by which the items are sorted in the thumbnail view"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:487
#, kde-format
msgctxt "item:inmenu Sort by"
msgid "By Name"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:488
#, kde-format
msgctxt "item:inmenu Sort by"
msgid "By Path"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:489
#, kde-format
msgctxt "item:inmenu Sort by"
msgid "By Date"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:490
#, kde-format
msgctxt "item:inmenu Sort by"
msgid "By Size"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:491
#, kde-format
msgctxt "item:inmenu Sort by"
msgid "By Rating"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:492
#, kde-format
msgctxt "item:inmenu Sort by"
msgid "By Download State"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:512
#, kde-format
msgctxt "@title:inmenu"
msgid "Item Sorting &Order"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:513
#, kde-format
msgctxt "@info:whatsthis"
msgid "Defines whether items are sorted in ascending or descending manner."
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:518
#, kde-format
msgctxt "@item:inmenu Sorting Order"
msgid "Ascending"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:519
#, kde-format
msgctxt "@item:inmenu Sorting Order"
msgid "Descending"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:531
#, kde-format
msgctxt "@title:menu"
msgid "&Group Items"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:532
#, kde-format
msgctxt "@info:whatsthis"
msgid "The categories in which the items in the thumbnail view are displayed"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:538
#, kde-format
msgctxt "@item:inmenu Group Items"
msgid "Flat List"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:539
#, kde-format
msgctxt "@item:inmenu Group Items"
msgid "By Folder"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:540
#, kde-format
msgctxt "@item:inmenu Group Items"
msgid "By Format"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:541
#, kde-format
msgctxt "@item:inmenu Group Items"
msgid "By Date"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:569
#, kde-format
msgctxt "@action:inmenu"
msgid "Fit to &Window"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:574
#, kde-format
msgctxt "@action:inmenu"
msgid "Zoom to 100%"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:592
#, kde-format
msgctxt "@option:check"
msgid "Show History"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:598
#, kde-format
msgctxt "@option:check"
msgid "Show Thumbbar"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:623
#: core/utilities/import/main/importui.cpp:853
#, kde-format
msgctxt "@action"
msgid "Previous Image"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:630
#, kde-format
msgctxt "@action Connection failed, try again?"
msgid "Retry"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:842
#, kde-format
msgctxt "@action"
msgid "Exit Preview Mode"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:847
#, kde-format
msgctxt "@action"
msgid "Next Image"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:859
#, kde-format
msgctxt "@action Go to first image"
msgid "First Image"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:864
#, kde-format
msgctxt "@action Go to last image"
msgid "Last Image"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:946
#, kde-format
msgctxt "@info:status"
msgid "Canceling current operation, please wait..."
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1003
#, kde-format
msgctxt "@info"
msgid "Do you want to close the dialog and cancel the current operation?"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1013
#, kde-format
msgctxt "@info:status"
msgid "Disconnecting from camera, please wait..."
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1055
#, kde-format
msgctxt "@info:status"
msgid "Scanning for new files, please wait..."
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1094
#, kde-format
msgctxt "@info:status"
msgid "Ready"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1150
#, kde-format
msgctxt "@info"
msgid "Failed to connect to the camera. Please make sure it is connected properly and turned on."
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1240
#, kde-format
msgctxt "@title:window"
msgid "Select Image to Upload"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1274
#, kde-format
msgctxt "@info"
msgid ""
"There is not enough free space on the Camera Medium to upload pictures.\n"
"\n"
"Space require: %1\n"
"Available free space: %2"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1328
#, kde-format
msgctxt "@info"
msgid ""
"<qt>Camera Folder <resource>%1</resource> already contains the item <resource>%2</resource>.<br/>"
"Please enter a new filename (without extension):</qt>"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1332
#, kde-format
msgctxt "@title:window"
msgid "File already exists"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1398
#, kde-format
msgctxt "@info"
msgid "Your custom target album date format is not valid. Please check your settings..."
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1438
#, kde-format
msgctxt "@info"
msgid "Collection which host your default target album set to process download from camera device is not available. Please select another one from camera configuration dialog."
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1447
#, kde-format
msgctxt "@info"
msgid "Your default target album set to process download from camera device is not available. Please select another one from camera configuration dialog."
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1472
#, kde-format
msgctxt "@info"
msgid "<p>Please select the destination album from the digiKam library to import the camera pictures into.</p>"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1563
#, kde-format
msgctxt "@info Popup notification"
msgid "Images download finished, you can now detach your camera while the images will be auto-rotated"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1570
#, kde-format
msgctxt "@info Popup notification"
msgid "Images download finished"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1960
#, kde-format
msgctxt "@info"
msgid "The items listed below are locked by camera (read-only). These items will not be deleted. If you really want to delete these items, please unlock them and try again."
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:1971
#, kde-format
msgctxt "@info"
msgid "About to delete this image. <b>Deleted file is unrecoverable.</b> Are you sure?"
msgid_plural "About to delete these %1 images. <b>Deleted files are unrecoverable.</b> Are you sure?"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:2022
#, kde-format
msgctxt "@title:window"
msgid "Insufficient Disk Space"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:2023
#, kde-format
msgctxt "@info"
msgid ""
"There is not enough free space on the disk of the album you selected to download and process the selected pictures from the camera.\n"
"\n"
"Estimated space required: %1\n"
"Available free space: %2\n"
"\n"
"Try Anyway?"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:2333
#: core/utilities/import/main/importui.cpp:2359
#, kde-format
msgctxt "@info:status"
msgid "No item selected (%1 item)"
msgid_plural "No item selected (%1 items)"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:2351
#, kde-format
msgctxt "@info:status Filename of first selected item of number of items"
msgid "<b>%1</b> (%2 of %3)"
msgstr ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:2369
#, kde-format
msgctxt "@info:status"
msgid "%2/%1 item selected"
msgid_plural "%2/%1 items selected"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5
#: core/utilities/import/main/importui.cpp:2440
#, kde-format
msgctxt "@info"
msgid "A file with the same name (<b>%1</b>) already exists in folder <resource>%2</resource>."
msgid "Enable this option to set date and time metadata tags to the right values if your camera does not set these tags correctly when pictures are taken. The values will be saved in the DateTimeDigitized and DateTimeCreated EXIF, XMP, and IPTC tags."
msgid "Enable this option to automatically convert all JPEG files to a lossless image format. <b>Note:</b> Image conversion can take a while on a slow computer."
"<p>These expressions may be used to customize date format:</p>"
"<p><b>d</b>: The day as a number without a leading zero (1 to 31)</p>"
"<p><b>dd</b>: The day as a number with a leading zero (01 to 31)</p>"
"<p><b>ddd</b>: The abbreviated localized day name (e.g. 'Mon' to 'Sun')</p>"
"<p><b>dddd</b>: The long localized day name (e.g. 'Monday' to 'Sunday').</p>"
"<p><b>M</b>: The month as a number without a leading zero (1 to 12)</p>"
"<p><b>MM</b>: The month as a number with a leading zero (01 to 12)</p>"
"<p><b>MMM</b>: The abbreviated localized month name (e.g. 'Jan' to 'Dec')</p>"
"<p><b>MMMM</b>: The long localized month name (e.g. 'January' to 'December')</p>"
"<p><b>yy</b>: The year as two digit number (eg. 00 to 99)</p>"
"<p><b>yyyy</b>: The year as four digit number (eg. 2012)</p>"
"<p>All other input characters will be treated as text. Any sequence of characters that are enclosed in singlequotes will be treated as text and not be used as an expression. Examples, if date is 20 July 1969:"
"<p>"
"<p><b>dd.MM.yyyy</b> : 20.07.1969</p>"
"<p><b>ddd MMMM d yy</b> : Sun July 20 69</p>"
"<p><b>'Photo shot on ' dddd</b> : Photo shot on Sunday</p>"
msgid "Enable this option if you want to download your pictures into automatically created file extension-based sub-albums of the destination album. This way, you can separate JPEG and RAW files as they are downloaded from your camera."
"The media server permit to share items through the local network using <a href='https://en.wikipedia.org/wiki/Digital_Living_Network_Alliance'>DLNA</a> standard and <a href='https://en.wikipedia.org/wiki/Universal_Plug_and_Play'>UPNP</a> protocol. Many kind of electronic devices can support DLNA, as tablets, cellulars, TV, etc.<br/>"
"Note: depending of the network features and the configuration, the delay to discover the server on client devices can take a while."
msgid "<b>Note: <b><a href='http://en.wikipedia.org/wiki/EXIF'>EXIF</a></b> text tags marked by (*) only support printable <b><a href='http://en.wikipedia.org/wiki/Ascii'>ASCII</a></b> characters.</b>"
msgid "Set here the date and time when the original image data was generated. For a digital still camera the date and time the picture was taken are recorded."
msgid "Set here the date and time when the image was stored as digital data. If, for example, an image was captured by a digital still camera and at the same time the file was recorded, then Original and Digitization date and time will have the same contents."
msgid "<b>Warning: EXIF <b><a href='http://en.wikipedia.org/wiki/Exchangeable_image_file_format#MakerNote_data'>Makernotes</a></b> can be unreadable if you set wrong device manufacturer/model description.</b>"
msgid "Select here the mode used by the camera to set exposure when the picture was taken. In auto-bracketing mode, the camera shoots a series of frames of the same scene at different exposure settings."
msgid "Set here the flash energy used to take the picture in BCPS units. Beam Candle Power Seconds is the measure of effective intensity of a light source when it is focused into a beam by a reflector or lens. This value is the effective intensity for a period of one second."
msgid "<b>Note: <b><a href='http://en.wikipedia.org/wiki/IPTC_Information_Interchange_Model'>IPTC</a></b> text tags only support the printable <b><a href='http://en.wikipedia.org/wiki/Ascii'>ASCII</a></b> characters and limit string sizes. Use contextual help for details.</b>"
msgid "Enter here the Informative Provider Reference. I.P.R is a name registered with the IPTC/NAA, identifying the provider that provides an indicator of the content. The default value for the I.P.R is \"IPTC\" if a standard Reference Code is used. This field is limited to 32 ASCII characters."
msgid "Enter here the Subject Reference Number. Provides a numeric code to indicate the Subject Name plus optional Subject Matter and Subject Detail Names in the language of the service. Subject Reference is a number from the range 01000000 to 17999999 and represent a language independent international reference to a Subject. A Subject is identified by its Reference Number and corresponding Names taken from a standard lists given by IPTC/NAA. If a standard reference code is used, these lists are the English language reference versions. This field is limited to 8 ASCII digit code."
msgid "Enter here the Subject Name. English language is used if you selected a standard IPTC/NAA reference code. This field is limited to 64 ASCII characters."
msgid "Enter here the Subject Matter Name. English language is used if you selected a standard IPTC/NAA reference code. This field is limited to 64 ASCII characters."
msgid "Enter here the Subject Detail Name. English language is used if you selected a standard IPTC/NAA reference code. This field is limited to 64 ASCII characters."
msgid "Enter here the Informative Provider Reference. I.P.R is a name registered with the XMP/NAA, identifying the provider that provides an indicator of the content. The default value for the I.P.R is \"XMP\" if a standard Reference Code is used."
msgid "Enter here the Subject Reference Number. Provides a numeric code to indicate the Subject Name plus optional Subject Matter and Subject Detail Names in the language of the service. Subject Reference is a number from the range 01000000 to 17999999 and represent a language independent international reference to a Subject. A Subject is identified by its Reference Number and corresponding Names taken from a standard lists given by XMP/NAA. If a standard reference code is used, these lists are the English language reference versions. This field is limited to 8 digit code."
msgid "Enter script for execution. Use $INPUT and $OUTPUT for input / output filenames (with special characters escaped). These would be substituted before shell execution."
msgid "When you choose to have the watermark repeated randomly, many times in the placement combo box, you can specify here whether the repetition, you can check this to make the watermark rotations random also [0, 90, 180, 270]"
msgid "Use this to get more control over the sparsity of watermark repetition. The higher the value the sparser the watermarks get. Use floating point values, typically between 1.0 and 3.0. It can also be less than 1.0"
msgid "If you have a photo in your set with a clock or another external time source on it, you can load it here and set the indicator to the (date and) time displayed. The difference of your internal camera clock will be determined from this setting."
msgid "Set this option to show the file modification date below the image thumbnail if it is different than camera creation date. This option is useful to identify quickly which items have been modified."
"Set this option to render icon-view with large thumbnail size, for example in case of 4K monitor is used.\n"
"By default this option is turned off and the maximum thumbnail size is limited to 256x256 pixels. When this option is enabled, thumbnail size can be extended to 512x512 pixels.\n"
"This option will store more data in thumbnail database and will use more system memory. digiKam needs to be restarted to take effect, and Rebuild Thumbnails option from Maintenance tool needs to be processed over whole collections."
msgid "This option changes the size in which thumbnails are generated. You need to restart digiKam for this option to take effect. Furthermore, you need to regenerate all already stored thumbnails via the <interface>Tools / Maintenance</interface> menu."
"<p>digiKam attempts to support all of the image formats that digital cameras produce, while being able to handle a few other important video and audio formats.</p>"
" "
"<p>You can add to the already-appreciable list of formats that digiKam handles by adding the extension of the type you want to add. Multiple extensions need to be separated by a semicolon or space.</p>"
"<p><b><u>Note:</u> changes done in this view will perform a database rescan in the background.</b></p>"
"<p>Here you can add the extensions of image files (including RAW files) to be displayed in the Album view. Just put \"xyz abc\" to display files with the xyz and abc extensions in your Album view.</p>"
"<p>You can also remove file formats that are shown by default by putting a minus sign in front of the extension: e.g. \"-gif\" would remove all GIF files from your Album view and any trace of them in your database. They would not be deleted, just not shown in digiKam.</p>"
"<p><b>Warning:</b> Removing files from the database means losing all of their tags and ratings.</p>"
"<p>Here you can add extra extensions of video files to be displayed in your Album view. Just write \"xyz abc\" to support files with the *.xyz and *.abc extensions. Clicking on these files will play them in an embedded video player.</p>"
"<p>You can also remove file formats that are supported by default by putting a minus sign in front of the extension: e.g. \"-avi\" would remove all AVI files from your Album view and any trace of them in your database. They would not be deleted, just not shown in digiKam.</p>"
"<p><b>Warning:</b> Removing files from the database means losing all of their tags and ratings.</p>"
"<p>Here you can add extra extensions of audio files to be displayed in your Album view. Just write \"xyz abc\" to support files with the *.xyz and *.abc extensions. Clicking on these files will play them in an embedded audio player.</p>"
"<p>You can also remove file formats that are supported by default by putting a minus sign in front of the extension: e.g. \"-ogg\" would remove all OGG files from your Album view and any trace of them in your database. They would not be deleted, just not shown in digiKam.</p>"
"<p><b>Warning:</b> Removing files from the database means losing all of their tags and ratings.</p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/album/setupmime.cpp:195
#, kde-format
msgid "Enter additional audio file extensions."
msgstr ""
#. +> trunk5
#: core/utilities/setup/album/setupmime.cpp:258
#, kde-format
msgid ""
"<p>You have chosen to remove the following image formats from the list of supported formats: <b>%1</b>.</p>"
"<p>These are very common formats. If you have images in your collection with these formats, they will be removed from the database and you will lose all information about them, including rating and tags.</p>"
"<p>Are you sure you want to apply your changes and lose the support for these formats?</p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/album/setupmime.cpp:311
#, kde-format
msgid ""
"<p>Files with these extensions will be recognized as images and included into the database:<br/>"
" <code>%1</code></p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/album/setupmime.cpp:321
#, kde-format
msgid ""
"<p>Files with these extensions will be recognized as video files and included into the database:<br/>"
" <code>%1</code></p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/album/setupmime.cpp:331
#, kde-format
msgid ""
"<p>Files with these extensions will be recognized as audio files and included into the database:<br/>"
" <code>%1</code></p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/camera/cameralist.cpp:278
#, kde-format
msgid "Failed to auto-detect camera; please make sure it is connected properly and is turned on. Would you like to try again?"
"<p>Set this option to load images at their full size for preview, rather than at a reduced size. As this option will make it take longer to load images, only use it if you have a fast computer.</p>"
"<p><b>Note:</b> for Raw images, a half size version of the Raw data is used instead of the embedded JPEG preview.</p>"
msgid "If this option is enabled, over- and under-exposure indicators will be displayed only when pure white and pure black color matches, as all color components match the condition in the same time. Otherwise, indicators are turned on when one of the color components matches the condition."
"<para><interface>Non-Destructive Editing and Versioning</interface> allows different versions of an image to be created, whilst always preserving the original image.</para>"
" "
"<para> All steps of the editing history are recorded and can be accessed later.</para>"
"<para>Select the file format in which edited images are saved automatically. Format-specific options, like compression settings, can be configured on the <interface>Format Options</interface> tab.</para>"
"<para>"
"<list>"
"<item><emphasis strong='true'>JPEG</emphasis>: JPEG is the most commonly used file format, but it employs lossy compression, which means that with each saving operation some image information will be irreversibly lost. JPEG offers a good compression rate, resulting in smaller files. </item>"
"<item><emphasis strong='true'>PNG</emphasis>: A widely used format employing lossless compression. The files, though, will be larger because PNG does not achieve very good compression rates.</item>"
"<item><emphasis strong='true'>TIFF</emphasis>: A commonly used format, usually uncompressed or with modest lossless compression. Resulting files will be large, but without quality loss due to compression. </item>"
"<item><emphasis strong='true'>PGF</emphasis>: This is a technically superior file format offering good compression rates with either lossy or lossless compression. But it is not yet widely used and supported, so your friends may not directly be able to open these files, and you may not be able to directly publish them on the web. </item>"
"<item><emphasis strong='true'>JPEG 2000</emphasis>: JPEG 2000 is similar to PGF. Loading or saving is slower, the compression rate is better, and the format more widely supported, though still not comparable to the tradition formats JPEG, PNG or TIFF. </item>"
"<para>First and foremost, the <emphasis>original image will never be overwritten.</emphasis> Instead, when an image is edited, a new file is created: The <interface>current version</interface>.</para>"
" "
"<para>You can also create multiple <interface>versions</interface> deriving from the same <interface>original image</interface>.</para>"
" "
"<para>In addition to these files representing a current version, digiKam can take and keep additional, <interface>intermediate snapshots</interface> during the editing process. This can be useful if you want to preserve the intermediate steps for later access, for example if some editing steps cannot be automatically reproduced.</para>"
"<para>If an image has been edited, only the <interface>current versions</interface> will be shown in the main thumbnail view. From the <interface>right sidebar</interface>, you always have access to all hidden files.</para>"
" "
"<para>With the options here, you can choose to show certain files permanently.</para>"
"<para>In addition to the pixel content, image files usually contain a variety of metadata. A lot of the parameters you can use in digiKam to manage files, such as rating or comment, can be written to the files' metadata.</para>"
" "
"<para>Storing in metadata allows one to preserve this information when moving or sending the files to different systems.</para>"
msgid "Instead of synchronizing metadata, just schedule it for synchronization.Synchronization can be done later by triggering the apply pending, or at digikam exit"
msgid "Turn on this option to write metadata into RAW TIFF/EP files. This feature requires the Exiv2 shared library, version >= 0.18.0. It is still experimental, and is disabled by default."
msgid "Turn off this option to not update file timestamps when files are changed as when you update metadata or image data. Note: disabling this option can introduce some dysfunctions with applications which use file timestamps properties to detect file modifications automatically."
msgid "Turning this option on, will force digiKam to rescan files that has been modified outside digiKam. If a file has changed it is file size or if the last modified timestamp has changed, a rescan of that file will be performed when digiKam starts."
msgid "Turning this option on, will force digiKam to delete the file metadata contained in the database before the file is rescanned. WARNING: if your metadata has been written to the database only and not to the file or sidecar, you will be able to lose inserted metadata such as tags, keywords, or geographic coordinates."
" You can change the contents, rearranging the individual pixels of the image data.<nl/>"
" Or you can set a flag that the file is to be rotated before it is shown.</para>"
" "
"<para>Select this option if you always want to set only a flag. This is less obtrusive, but requires support if the file is accessed with another software. Ensure to allow setting the flag in the metadata if you want to share your files outside digiKam.</para>"
" You can change the contents, rearranging the individual pixels of the image data.<nl/>"
" Or you can set a flag that the file is to be rotated before it is shown.</para>"
" "
"<para>Select this option if you want the file to be rotated by changing the content. This is a lossless operation for JPEG files. For other formats it is a lossy operation, which you need to enable explicitly. It is not support for RAW and other read-only formats, which will be rotated by flag only.</para>"
msgid "For some file formats which apply lossy compression, data will be lost each time the content is rotated. Check this option to allow lossy rotation. If not enabled, these files will be rotated by flag."
msgid "<b>Note: These settings affect the album view and not the image editor. The image editor always changes the image data during the rotation.</b>"
msgid "Turn on this option if you want to apply changes to rating, comments and tags made in Baloo to digiKam's metadata storage. Please note that image metadata will not be edited automatically."
"<p><a href='http://community.kde.org/Baloo'>Baloo</a> provides the basis to handle all kinds of metadata on the KDE desktop in a generic fashion. It allows you to tag, rate and comment your files in KDE applications like Dolphin.</p>"
" "
"<p>Please set here if you want to synchronize the metadata stored by digiKam desktop-wide with the Baloo Desktop Search.</p>"
"<p>Add file types to be recognised as sidecars.</p>"
"<p>digiKam (optionally) writes metadata to *.xmp sidecar files. Other programs might use different types, which can be specified below. digiKam will neither display these nor read from or write to them. But whenever a matching album item (e.g. \"image.dng\" for \"image.dng.pp3\") is renamed, moved, copied or deleted, the same operation will be done on these sidecar files.</p>"
"<p>Multiple extensions must be separated by a semicolon or a space.</p>"
msgid "<p>Here you can add extra extensions of sidecars files to be processed alongside regular items. These files will not be visible, but regarded as an extension of the main file. Just write \"xyz abc\" to support files with the *.xyz and *.abc extensions. The internally used sidecars type *.xmp is always included.</p>"
msgid "Switching off exif auto rotation will most probably show your images in a wrong orientation, so only change this option if you explicitly require this. Furthermore, you need to regenerate all already stored thumbnails via the <interface>Tools | Maintenance...</interface> menu."
msgid "Switching on this option and your metadata has been written to the database only and not to the file or sidecar, you will be able to lose inserted metadata such as tags, keywords, or geographic coordinates."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setup.cpp:139
#, kde-format
msgid "Database"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setup.cpp:140
#, kde-format
msgid ""
"<qt>Database Settings<br/>"
"<i>Customize database settings</i></qt>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setup.cpp:145
#, kde-format
msgid "Collections"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setup.cpp:146
#, kde-format
msgid ""
"<qt>Collections Settings<br/>"
"<i>Set root albums locations</i></qt>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setup.cpp:152
#, kde-format
msgid ""
"<qt>Application Views Settings<br/>"
"<i>Customize the look of the views</i></qt>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setup.cpp:157
#, kde-format
msgid "Tool-Tip"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setup.cpp:158
#, kde-format
msgid ""
"<qt>Items Tool-Tip Settings<br/>"
"<i>Customize information in item tool-tips</i></qt>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setup.cpp:169
#, kde-format
msgid "Templates"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setup.cpp:170
#, kde-format
msgid ""
"<qt>Metadata templates<br/>"
"<i>Manage your collection of metadata templates</i></qt>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setup.cpp:176
#, kde-format
msgid ""
"<qt>Image Editor Settings<br/>"
"<i>Customize the image editor settings</i></qt>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setup.cpp:182
#, kde-format
msgid ""
"<qt>Settings for Color Management<br/>"
"<i>Customize the color management settings</i></qt>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setup.cpp:188
#, kde-format
msgid ""
"<qt>Light Table Settings<br/>"
"<i>Customize tool used to compare images</i></qt>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setup.cpp:200
#, kde-format
msgid "<qt>Image Quality Sorter Settings<br/>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setup.cpp:205
#, kde-format
msgid ""
"<qt>Camera Settings<br/>"
"<i>Manage your camera devices</i></qt>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setup.cpp:220
#, kde-format
msgid ""
"<qt>Miscellaneous Settings<br/>"
"<i>Customize behavior of the other parts of digiKam</i></qt>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setup.cpp:413
#, kde-format
msgid ""
"The Exif auto-rotate thumbnails option has been changed.\n"
"Do you want to rebuild all albums' items' thumbnails now?\n"
"\n"
"Note: thumbnail processing can take a while. You can start this job later from the \"Tools-Maintenance\" menu."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupdatabase.cpp:114
#, kde-format
msgctxt "@title:tab"
msgid "Database Settings"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupdatabase.cpp:122
#, kde-format
msgid ""
"<p>Set the names of directories that you want to ignore from your photo collections. The names are case sensitive and should be separated by a semicolon.</p>"
"<p>This is for example useful when you store your photos on a Synology NAS (Network Attached Storage). In every directory the system creates a subdirectory @eaDir to store thumbnails. To avoid digiKam inserting the original photo and its corresponding thumbnail twice, @eaDir is ignored by default.</p>"
"<p>To re-include directories that are ignored by default prefix it with a minus, e.g. -@eaDir.</p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupdatabase.cpp:140
#, kde-format
msgid "Additional directories to ignore (<a href='image'>Currently ignored directories</a>):"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupdatabase.cpp:145
#, kde-format
msgid "Enter directories that you want to ignore from adding to your collections."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupdatabase.cpp:166
#, kde-format
msgctxt "@title:tab"
msgid "Ignored Directories"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupdatabase.cpp:263
#, kde-format
msgctxt "@info"
msgid ""
"<p>The process of updating the file hashes takes a few minutes.</p>"
" "
"<p>Please ensure that any important collections on removable media are connected. <i>After the upgrade you cannot use your database with a digiKam version prior to 2.0.</i></p>"
" "
"<p>Do you want to begin the update?</p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupdatabase.cpp:278
#, kde-format
msgctxt "@title:group"
msgid "Updates"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupdatabase.cpp:281
#, kde-format
msgctxt "@action:button"
msgid "Update File Hashes"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupdatabase.cpp:283
#, kde-format
msgctxt "@info:tooltip"
msgid ""
"<qt>File hashes are used to identify identical files and to display thumbnails. A new, improved algorithm to create the hash is now used. The old algorithm, though, still works quite well, so it is recommended to carry out this upgrade, but not required.<br>"
" After the upgrade you cannot use your database with a digiKam version prior to 2.0.</qt>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupdatabase.cpp:292
#, kde-format
msgctxt "@info:tooltip"
msgid "Get information about <interface>Update File Hashes</interface>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupdatabase.cpp:316
#, kde-format
msgid ""
"<p>Directories starting with a dot are ignored by default.<br/>"
" <code>%1</code></p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:186
#, kde-format
msgid "Enable Color Management"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:187
#, kde-format
msgid ""
"<ul>"
"<li>Checked: Color Management is enabled</li>"
"<li>Unchecked: Color Management is disabled</li>"
"</ul>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:194
#, kde-format
msgid "Visit Little CMS project website"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:204
#, kde-format
msgid "Working Color Space"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:210
#, kde-format
msgid "<p>This is the color space all the images will be converted to when opened (if you choose to convert) and the profile that will be embedded when saving. Good and safe choices are <b>Adobe RGB (1998)</b> and <b>sRGB IEC61966-2.1</b>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:216
#, kde-format
msgid "<p>You can use this button to get more detailed information about the selected workspace profile.</p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:230
#, kde-format
msgid "When the profile of an image does not match the working color space"
msgid "<p>If an image has an embedded color profile not matching the working space profile, digiKam will ask if you want to convert to the working space, keep the embedded profile or discard the embedded profile and assign a different one.</p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:245
#, kde-format
msgid "Convert the image to the working color space"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:246
#, kde-format
msgid "<p>If an image has an embedded color profile not matching the working space profile, digiKam will convert the image's color information to the working color space. This changes the pixel data, but not the appearance of the image.</p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:262
#, kde-format
msgid "When an image has no color profile information"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:270
#, kde-format
msgid "<p>If an image has no embedded color profile, digiKam will ask which color space shall be used to interpret the image and to which color space it shall be transformed for editing.</p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:274
#, kde-format
msgid "Assume it is using the sRGB color space (Internet standard)"
msgstr ""
#. i18n("<p></p>"));
#.
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:279
#, kde-format
msgid "and convert it to the working color space"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:291
#, kde-format
msgid "Assume it is using the working color space"
msgstr ""
#. i18n("<p></p>"));
#.
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:296
#, kde-format
msgid "Convert it from default input color space to working space"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:314
#, kde-format
msgid "When loading a RAW file with uncalibrated colors"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:321
#, kde-format
msgid "Ask for the input profile"
msgstr ""
#. i18n("<p></p>"));
#.
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:326
#, kde-format
msgid "Automatic color correction"
msgstr ""
#. i18n("<p></p>"));
#.
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:331
#, kde-format
msgid "Convert it from the default input profile"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:355
#, kde-format
msgid "Color Managed View"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:360
#, kde-format
msgid "Monitor profile:"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:364
#, kde-format
msgid "<p>Select the color profile for your monitor here.</p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:368
#, kde-format
msgid "<p>You can use this button to get more detailed information about the selected monitor profile.</p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:372
#, kde-format
msgid "Use color managed view in editor"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:373
#, kde-format
msgid "<p>Turn on this option if you want to use your <b>Monitor Color Profile</b> to show your pictures in the Image Editor window with a color correction adapted to your monitor. You can at any time toggle this option from the Editor window. <i>Warning</i>: This can slow down rendering of the image, depending on the speed of your computer.</p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:380
#, kde-format
msgid "Use color managed view for previews and thumbnails"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:395
#, kde-format
msgid "Camera and Scanner"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:400
#, kde-format
msgid "Default input color profile:"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:402
#, kde-format
msgid "<p>This is the default color profile for your input device (that is your camera - or your scanner). A camera input profile is recommended for correct conversion of RAW images in 16bit. Some of the options about loading behavior above refer to this profile.</p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:409
#, kde-format
msgid "<p>You can use this button to get more detailed information about the selected input profile.</p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:420
#, kde-format
msgid "Printing and Proofing"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:425
#, kde-format
msgid "Output device profile:"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:434
#, kde-format
msgid "<p>You can use this button to get more detailed information about the selected proofing profile.</p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:445
#, kde-format
msgid "Color Profiles Repository"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:450
#, kde-format
msgid "digiKam looks for ICC profiles in a number of <a href='default'>default locations</a>. You can specify an additional folder:"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:458
#, kde-format
msgid "<p>digiKam searches ICC profiles in default system folders and ships itself a few selected profiles. Store all your additional color profiles in the directory set here.</p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:481
#, kde-format
msgid "Use black point compensation"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:482
#, kde-format
msgid "<p><b>Black Point Compensation</b> is a way to make adjustments between the maximum black levels of digital files and the black capabilities of various digital devices.</p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:488
#, kde-format
msgid "Rendering Intents:"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:504
#, kde-format
msgid "Profiles"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:698
#, kde-format
msgid "Monitor Profile From System Settings"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:730
#, kde-format
msgid "No ICC profiles files found."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:745
#, kde-format
msgid "No Display Profile Available"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:747
#, kde-format
msgid "No Output Profile Available"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:877
#, kde-format
msgctxt "none of the paths"
msgid "none"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:886
#, kde-format
msgid ""
"On Windows, the default search paths include "
"<ul>"
"<li>%1/Windows/Spool/Drivers/Color/</li>"
"<li>%2/Windows/Color/</li>"
"</ul>"
"On your system, currently these paths exist and are scanned:"
"<ul>"
"<li>%3</li>"
"</ul>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:900
#, kde-format
msgid ""
"On Mac OS X, the default search paths include "
"<ul>"
"<li>/System/Library/ColorSync/Profiles</li>"
"<li>/Library/ColorSync/Profiles</li>"
"<li>~/Library/ColorSync/Profiles</li>"
"<li>/opt/local/share/color/icc</li>"
"<li>/opt/digikam/share/color/icc</li>"
"<li>~/.local/share/color/icc/</li>"
"<li>~/.local/share/icc/</li>"
"<li>~/.color/icc/</li>"
"</ul>"
"On your system, currently these paths exist and are scanned:"
"<ul>"
"<li>%1</li>"
"</ul>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupicc.cpp:917
#, kde-format
msgid ""
"On Linux, the default search paths include "
"<ul>"
"<li>/usr/share/color/icc</li>"
"<li>/usr/local/share/color/icc</li>"
"<li>~/.local/share/color/icc/</li>"
"<li>~/.local/share/icc/</li>"
"<li>~/.color/icc/</li>"
"</ul>"
"On your system, currently these paths exist and are scanned:"
msgid "Set this option to automatically synchronize zooming and panning between left and right panels if the images have the same size."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuplighttable.cpp:103
#, kde-format
msgid "Selecting a thumbbar item loads the image to the right panel"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuplighttable.cpp:105
#, kde-format
msgid "Set this option to automatically load an image into the right panel when the corresponding item is selected on the thumbbar."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuplighttable.cpp:108
#, kde-format
msgid "Clear the light table on close"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuplighttable.cpp:109
#, kde-format
msgid "Set this option to remove all images from the light table when you close it, or unset it to preserve the images currently on the light table."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:134
#, kde-format
msgid "String comparison type:"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:136
#, kde-format
msgctxt "method to compare strings"
msgid "Natural"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:137
#, kde-format
msgctxt "method to compare strings"
msgid "Normal"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:138
#, kde-format
msgid ""
"<qt>Sets the way in which strings are compared inside digiKam. This eg. influences the sorting of the tree views.<br/>"
"<b>Natural</b> tries to compare strings in a way that regards some normal conventions and will eg. result in sorting numbers naturally even if they have a different number of digits.<br/>"
"<b>Normal</b> uses a more technical approach. Use this style if you eg. want to entitle albums with ISO dates (201006 or 20090523) and the albums should be sorted according to these dates.</qt>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:148
#, kde-format
msgid "Confirm when moving items to the &trash"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:149
#, kde-format
msgid "Confirm when permanently deleting items"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:150
#, kde-format
msgid "Do not confirm when applying changes in the &right sidebar"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:151
#, kde-format
msgid "&Scan for new items at startup (makes startup slower)"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:152
#, kde-format
msgid ""
"Set this option to force digiKam to scan all collections for new items to\n"
"register new elements in database. The scan is performed in the background through\n"
"the progress manager available in the statusbar\n"
" when digiKam main interface\n"
"is loaded. If your computer is fast enough, this will have no effect on usability\n"
"of digiKam while scanning. If your collections are huge or if you use a remote database,\n"
"this can introduce low latency, and it is recommended to disable this option and to plan\n"
"a manual scan through the maintenance tool at the right moment."
"Set this option to force digiKam to clean up the core database from obsolete item entries.\n"
"Entries are only deleted if the connected image/video/audio file was already removed, i.e.\n"
"the database object wastes space.\n"
"This option does not clean up other databases as the thumbnails or recognition db.\n"
"For clean up routines for other databases, please use the maintenance."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:176
#, kde-format
msgid "Draw frames around grouped items"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:178
#, kde-format
msgid "Show only face tags for assigning names in people sidebar"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:181
#, kde-format
msgid "Lower bound for minimum similarity:"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:187
#, kde-format
msgid "Select here the lower bound of the minimum similarity threshold for fuzzy and duplicates searches. The default value is 40. Selecting a lower value than 40 can make the search <b>really</b> slow."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:199
#, kde-format
msgid "Set this option to configure how sidebar tab titles are visible. Use \"Only For Active Tab\" option if you use a small screen resolution as with a laptop computer."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:274
#, kde-format
msgctxt "@title:tab"
msgid "Behaviour"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:283
#, kde-format
msgid "Perform the following operations on all group members:"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:284
#, kde-format
msgid ""
"When images are grouped the following operations<br/>"
"are performed only on the displayed item (No)<br/>"
"or on all the hidden items in the group as well (Yes).<br/>"
"If Ask is selected, there will be a prompt every<br/>"
"time this operation is executed."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:292
#, kde-format
msgid "Ask"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupmisc.cpp:339
#, kde-format
msgctxt "@title:tab"
msgid "Grouping"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:106
#, kde-format
msgid "Delay between images:"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:114
#, kde-format
msgid "The delay, in seconds, between images."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:117
#, kde-format
msgid "Start with current image"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:118
#, kde-format
msgid "If this option is enabled, the Slideshow will be started with the current image selected in the images list."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:121
#, kde-format
msgid "Slideshow runs in a loop"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:122
#, kde-format
msgid "Run the slideshow in a loop."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:124
#, kde-format
msgid "Show progress indicator"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:125
#, kde-format
msgid "Show a progress indicator with pending items to show and time progression."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:127
#, kde-format
msgid "Show image file name"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:128
#, kde-format
msgid "Show the image file name at the bottom of the screen."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:130
#, kde-format
msgid "Show image creation date"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:131
#, kde-format
msgid "Show the image creation time/date at the bottom of the screen."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:134
#, kde-format
msgid "Show the camera aperture and focal length at the bottom of the screen."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:137
#, kde-format
msgid "Show the camera exposure and sensitivity at the bottom of the screen."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:140
#, kde-format
msgid "Show the camera make and model at the bottom of the screen."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:142
#, kde-format
msgid "Show image caption"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:143
#, kde-format
msgid "Show the image caption at the bottom of the screen."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:145
#, kde-format
msgid "Show image title"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:146
#, kde-format
msgid "Show the image title at the bottom of the screen."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:148
#, kde-format
msgid "Show image caption if it has not title"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:149
#, kde-format
msgid "Show the image caption at the bottom of the screen if no titles existed."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:151
#, kde-format
msgid "Show image tags"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:152
#, kde-format
msgid "Show the digiKam image tag names at the bottom of the screen."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:154
#, kde-format
msgid "Show image labels"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:155
#, kde-format
msgid "Show the digiKam image color label, pick label, and rating at the bottom of the screen."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:158
#, kde-format
msgid "Screen placement:"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:160
#, kde-format
msgid "In case of multi-screen computer, select here the monitor to slide contents."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:163
#, kde-format
msgctxt "@label:listbox The current screen, for the presentation mode"
msgid "Current Screen"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:164
#, kde-format
msgctxt "@label:listbox The default screen for the presentation mode"
msgid "Default Screen"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setupslideshow.cpp:168
#, kde-format
msgctxt "@label:listbox %1 is the screen number (0, 1, ...)"
msgid "Screen %1"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptemplate.cpp:92
#, kde-format
msgid "Template Title:"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptemplate.cpp:95
#, kde-format
msgid "Enter the metadata template title here."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptemplate.cpp:96
#, kde-format
msgid "<p>Enter the metadata template title here. This title will be used to identify a template in your collection.</p>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptemplate.cpp:106
#, kde-format
msgid "<b>Note: These information are used to set <b><a href='http://en.wikipedia.org/wiki/Extensible_Metadata_Platform'>XMP</a></b> and <b><a href='http://en.wikipedia.org/wiki/IPTC'>IPTC</a></b> tag contents. There is no limitation with XMP, but note that IPTC text tags only support the printable <b><a href='http://en.wikipedia.org/wiki/Ascii'>ASCII</a></b> character set, and tag sizes are limited. Use contextual help for details.</b>"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptemplate.cpp:127
#, kde-format
msgid "&Replace..."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptemplate.cpp:244
#: core/utilities/setup/setuptemplate.cpp:273
#, kde-format
msgid "Cannot register new metadata template without title."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptemplate.cpp:250
#, kde-format
msgid "A metadata template named '%1' already exists."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:195
#, kde-format
msgid "Tool-Tips Font:"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:196
#, kde-format
msgid "Select here the font used to display text in tool-tips."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:204
#, kde-format
msgid "Show icon-view and thumb-bar items' tool-tips"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:205
#, kde-format
msgid "Set this option to display image information when the mouse hovers over an icon-view or thumb-bar item."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:208
#, kde-format
msgid "File/Item Information"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:211
#, kde-format
msgid "File name"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:214
#, kde-format
msgid "File date"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:217
#, kde-format
msgid "File size"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:220
#, kde-format
msgid "Image type"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:223
#, kde-format
msgid "Image dimensions"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:226
#, kde-format
msgid "Image aspect ratio"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:227
#, kde-format
msgid "Set this option to display the image aspect ratio."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:243
#: core/utilities/setup/setuptooltip.cpp:423
#, kde-format
msgid "Camera make and model"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:251
#, kde-format
msgid "Camera date"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:254
#: core/utilities/setup/setuptooltip.cpp:431
#, kde-format
msgid "Camera aperture and focal length"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:258
#: core/utilities/setup/setuptooltip.cpp:435
#, kde-format
msgid "Camera exposure and sensitivity"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:262
#, kde-format
msgid "Camera mode and program"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:266
#: core/utilities/setup/setuptooltip.cpp:439
#, kde-format
msgid "Camera flash settings"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:270
#: core/utilities/setup/setuptooltip.cpp:443
#, kde-format
msgid "Camera white balance settings"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:287
#, kde-format
msgid "digiKam Information"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:290
#: core/utilities/setup/setuptooltip.cpp:363
#, kde-format
msgid "Album name"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:291
#: core/utilities/setup/setuptooltip.cpp:364
#, kde-format
msgid "Set this option to display the album name."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:293
#, kde-format
msgid "Image title"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:294
#, kde-format
msgid "Set this option to display the image title."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:296
#, kde-format
msgid "Image caption"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:297
#, kde-format
msgid "Set this option to display the image captions."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:299
#, kde-format
msgid "Image tags"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:300
#, kde-format
msgid "Set this option to display the image tags."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:302
#, kde-format
msgid "Image labels"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:303
#, kde-format
msgid "Set this option to display the image pick, color, rating labels."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:315
#, kde-format
msgid "Audio/Video Information"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:318
#, kde-format
msgid "Video Aspect Ratio"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:319
#: core/utilities/setup/setuptooltip.cpp:334
#, kde-format
msgid "Set this option to display the Aspect Ratio of the Video."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:322
#, kde-format
msgid "Set this option to display the Audio Bit Rate of the Video."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:325
#, kde-format
msgid "Set this option to display the Audio Channel Type of the Video."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:328
#, kde-format
msgid "Set this option to display the Audio Codec of the Video."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:330
#, kde-format
msgid "Video Duration"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:331
#, kde-format
msgid "Set this option to display the Duration of the Video."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:333
#, kde-format
msgid "Video Frame Rate"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:337
#, kde-format
msgid "Set this option to display the Codec of the Video."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:357
#, kde-format
msgid "Show album items' tool-tips"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:358
#, kde-format
msgid "Album Information"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:360
#: core/utilities/setup/setuptooltip.cpp:401
#, kde-format
msgid "Set this option to display album information when the mouse hovers over a folder-view item."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:366
#, kde-format
msgid "Album date"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:367
#, kde-format
msgid "Set this option to display the album date."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:369
#, kde-format
msgid "Album collection"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:370
#, kde-format
msgid "Set this option to display the album collection."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:372
#, kde-format
msgid "Album category"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:373
#, kde-format
msgid "Set this option to display the album category."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:375
#, kde-format
msgid "Album caption"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:376
#, kde-format
msgid "Set this option to display the album caption."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:378
#, kde-format
msgid "Album preview"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:379
#, kde-format
msgid "Set this option to display the album preview."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:398
#, kde-format
msgid "Show import items' tool-tips"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:399
#, kde-format
msgid "Import Information"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:404
#, kde-format
msgid "Item name"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:405
#, kde-format
msgid "Set this option to display the item name."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:407
#, kde-format
msgid "Item date"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:408
#, kde-format
msgid "Set this option to display the item date."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:410
#, kde-format
msgid "Item size"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:411
#, kde-format
msgid "Set this option to display the item size."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:413
#, kde-format
msgid "Item type"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:414
#, kde-format
msgid "Set this option to display the item type."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:416
#, kde-format
msgid "Item dimensions"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:417
#, kde-format
msgid "Set this option to display the item dimensions."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:420
#, kde-format
msgid "Note: these settings require \"Use File Metadata\" option from Camera Setup Behavior page."
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:470
#, kde-format
msgid "Icon Items"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:471
#, kde-format
msgid "Album Items"
msgstr ""
#. +> trunk5
#: core/utilities/setup/setuptooltip.cpp:472
#, kde-format
msgid "Import Items"
msgstr ""
#. +> trunk5
#: core/utilities/slideshow/slideend.cpp:77
#, kde-format
msgid ""
"Slideshow Completed.\n"
"Click To Exit\n"
"or press ESC..."
msgstr ""
#. +> trunk5
#: core/utilities/slideshow/slideerror.cpp:88
#, kde-format
msgid ""
"An error has occurred to show item\n"
"%1"
msgstr ""
#. +> trunk5
#: core/utilities/slideshow/slidehelp.cpp:43
#, kde-format
msgid "Slideshow Usage"
msgstr ""
#. +> trunk5
#: core/utilities/slideshow/slidehelp.cpp:51
#, kde-format
msgid ""
"<qt>"
"<table>"
"<tr>"
"<td colspan=\"2\"><nobr>"
"<center><b>"
"<h1>Item Access</h1>"
"</b></center>"
"</nobr></td>"
"</tr>"
"<tr>"
"<td>Previous Item:</td>"
"<td><i>Up</i> key</td>"
"</tr>"
"<tr>"
"<td></td>"
"<td><i>PgUp</i> key</td>"
"<tr>"
"<td></td>"
"<td><i>Left</i> key</td>"
"<tr>"
"<td></td>"
"<td>Mouse wheel up</td>"
"<tr>"
"<td></td>"
"<td>Left mouse button</td>"
"<tr>"
"<td>Next Item:</td>"
"<td><i>Down</i> key</td>"
"</tr>"
"<tr>"
"<td></td>"
"<td><i>PgDown</i> key</td>"
"<tr>"
"<td></td>"
"<td><i>Right</i> key</td>"
"<tr>"
"<td></td>"
"<td>Mouse wheel down</td>"
"<tr>"
"<td></td>"
"<td>Right mouse button</td>"
"<tr>"
"<td>Pause/Start:</td>"
"<td><i>Space</i> key</td>"
"</tr>"
"<tr>"
"<td>Quit:</td>"
"<td><i>Esc</i> key"
"<td></tr>"
"<tr>"
"<td colspan=\"2\"><nobr>"
"<center><b>"
"<h1>Item Properties</h1>"
"</b></center>"
"</nobr></td>"
"</tr>"
"<tr>"
"<td>Change Tags:</td>"
"<td>Use Tags keyboard shortcuts</td>"
"</tr>"
"<tr>"
"<td>Change Rating:</td>"
"<td>Use Rating keyboard shortcuts</td>"
"</tr>"
"<tr>"
"<td>Change Color Label:</td>"
"<td>Use Color label keyboard shortcuts</td>"
"</tr>"
"<tr>"
"<td>Change Pick Label:</td>"
"<td>Use Pick label keyboard shortcuts</td>"
"</tr>"
"<tr>"
"<td colspan=\"2\"><nobr>"
"<center><b>"
"<h1>Others</h1>"
"</b></center>"
"</nobr></td>"
"</tr>"
"<tr>"
"<td>Show this help:</td>"
"<td><i>F1</i> key</td>"
"</tr>"
"</table>"
"</qt>"
msgstr ""
#. +> trunk5
#: core/utilities/slideshow/slideshow.cpp:514
#, kde-format
msgctxt "Reason for inhibiting the screensaver activation, when the presentation mode is active"
msgid "Cannot load WinTab driver and no Windows Ink pen devices are found. If you have a drawing tablet, please make sure the tablet driver is properly installed."
msgstr ""
#. +> trunk5 stable5
#: krita/main.cc:359
#, kde-format
msgid "Cannot load WinTab driver. If you have a drawing tablet, please make sure the tablet driver is properly installed."
msgid "Adds pixels using the color of surrounding pixels. Produces smoother tonal gradations than Bilinear."
msgstr ""
#. +> trunk5
#: libs/image/kis_filter_strategy.h:96
#, kde-format
msgid "Nearest Neighbor"
msgstr ""
#. +> stable5
#: libs/image/kis_filter_strategy.h:96
#, kde-format
msgid "Box"
msgstr ""
#. +> trunk5 stable5
#: libs/image/kis_filter_strategy.h:102
#, kde-format
msgid "Replicate pixels in the image. Preserves all the original detail, but can produce jagged effects."
msgstr ""
#. +> trunk5 stable5
#: libs/image/kis_filter_strategy.h:115
#: libs/ui/canvas/kis_canvas_controller.cpp:307
#, kde-format
msgid "Bilinear"
msgstr ""
#. +> trunk5 stable5
#: libs/image/kis_filter_strategy.h:121
#, kde-format
msgid "Adds pixels averaging the color values of surrounding pixels. Produces medium quality results when the image is scaled from half to two times the original size."
msgstr ""
#. +> trunk5 stable5
#: libs/image/kis_filter_strategy.h:131
#, kde-format
msgid "Bell"
msgstr ""
#. +> trunk5 stable5
#: libs/image/kis_filter_strategy.h:142
#, kde-format
msgid "BSpline"
msgstr ""
#. +> trunk5 stable5
#: libs/image/kis_filter_strategy.h:153
#, kde-format
msgid "Lanczos3"
msgstr ""
#. +> trunk5 stable5
#: libs/image/kis_filter_strategy.h:159
#, kde-format
msgid "Offers similar results than Bicubic, but maybe a little bit sharper. Can produce light and dark halos along strong edges."
msgid "This merge strategy attempts to find the best solution for merging, for instance by merging the list of authors together, or keeping identical photographic information."
msgid "This image is larger than <b>%1 x %2</b>. Images this size cannot be saved to this format."
msgstr ""
#. +> trunk5 stable5
#: libs/impex/ColorModelCheck.h:44
#, kde-format
msgctxt "image conversion warning"
msgid "The color model <b>%1</b> or channel depth <b>%2</b> cannot be saved to this format. Your image will be converted."
msgstr ""
#. +> trunk5 stable5
#: libs/impex/ColorModelHomogenousCheck.h:125
#, kde-format
msgctxt "image conversion warning"
msgid "Your image contains layers with a color model that is different from the image. The layers will be converted."
msgstr ""
#. +> trunk5 stable5
#: libs/impex/ColorModelPerLayerCheck.h:129
#, kde-format
msgctxt "image conversion warning"
msgid "Your image contains layers with the color model <b>%1</b> and channel depth <b>%2</b> which cannot be saved to this format. The layers will be converted."
msgstr ""
#. +> trunk5 stable5
#: libs/impex/CompositionsCheck.h:36
#, kde-format
msgctxt "image conversion warning"
msgid "The image contains <b>compositions</b>. The compositions will not be saved."
msgstr ""
#. +> trunk5 stable5
#: libs/impex/ExifCheck.h:40
#, kde-format
msgctxt "image conversion warning"
msgid "The image contains <b>Exif</b> metadata. The metadata will not be saved."
"<p><i>Thanks! You were all <b>awesome</b>!</i></p>"
"</body></html>"
msgstr ""
#. +> trunk5 stable5
#: libs/ui/dialogs/kis_about_application.cpp:101
#, kde-format
msgid "Backers"
msgstr ""
#. +> trunk5 stable5
#: libs/ui/dialogs/kis_about_application.cpp:107
#, kde-format
msgid ""
"<html><head/><body>"
"<h1 align=\"center\">Thanks To</h1>"
"<p>"
msgstr ""
#. +> trunk5 stable5
#: libs/ui/dialogs/kis_about_application.cpp:126
#, kde-format
msgid ""
".</p>"
"<p><i>For supporting Krita development with advice, icons, brush sets and more.</i></p>"
"</body></html>"
msgstr ""
#. +> trunk5 stable5
#: libs/ui/dialogs/kis_about_application.cpp:129
#, kde-format
msgid "Also Thanks To"
msgstr ""
#. +> trunk5 stable5
#: libs/ui/dialogs/kis_about_application.cpp:133
#, kde-format
msgid ""
"<html><head/><body>"
"<h1 align=\"center\"><b>Your Rights</b></h1>"
"<p>Krita is released under the GNU General Public License (version 3 or any later version).</p>"
"<p>This license grants people a number of freedoms:</p>"
"<ul>"
"<li>You are free to use Krita, for any purpose</li>"
"<li>You are free to distribute Krita</li>"
"<li>You can study how Krita works and change it</li>"
"<li>You can distribute changed versions of Krita</li>"
"</ul>"
"<p>The Krita Foundation and its projects on krita.org are <b>committed</b> to preserving Krita as free software.</p>"
"<h1 align=\"center\">Your artwork</h1>"
"<p>What you create with Krita is your sole property. All your artwork is free for you to use as you like.</p>"
"<p>That means that Krita can be used commercially, for any purpose. There are no restrictions whatsoever.</p>"
"<p>Krita’s GNU GPL license guarantees you this freedom. Nobody is ever permitted to take it away, in contrast to trial or educational versions of commercial software that will forbid your work in commercial situations.</p>"
"<br/>"
"<hr/>"
"<pre>"
msgstr ""
#. +> trunk5 stable5
#: libs/ui/dialogs/kis_about_application.cpp:161
#, kde-format
msgid "License"
msgstr ""
#. +> trunk5 stable5
#: libs/ui/dialogs/kis_about_application.cpp:169
#, kde-format
msgid ""
"<html><head/><body>"
"<h1 align=\"center\"><b>Third-party Libraries used by Krita</b></h1>"
"<p>Krita is built on the following free software libraries:</p>"
msgid "The image data you want to paste does not have an ICM profile associated with it. If you do not select a profile, Krita will assume that the image data is encoded in the import profile defined in the Settings dialog."
msgid "Hue hopefully maintained (but not required), lightness and saturation sacrificed to maintain the perceived color. White point changed to result in neutral grays. Intended for images."
msgid "Hue and saturation maintained with lightness sacrificed to maintain saturation. White point changed to result in neutral grays. Intended for business graphics (make it colorful charts, graphs, overheads, ...)"
msgid "Within the destination device gamut; hue, lightness and saturation are maintained. Outside the gamut; hue and lightness are maintained, saturation is sacrificed. White point for source and destination; unchanged. Intended for spot colors (Pantone, TruMatch, logo colors, ...)"
"<p><a href=\"https://en.wikipedia.org/wiki/Color_space\"><span style=\" font-weight:600; text-decoration: underline; color:#006e28;\">Color Spaces</span></a> determine how colors are encoded in your files. Different color spaces have different properties and are used for different purposes.</p>"
"<p>Try to disable vsync for Krita. This makes painting more responsive. Uncheck only when experiencing crashes with some GPU/driver combinations.</p>"
"<p><span style=\" font-weight:600;\">Note:</span> This changes only the colorspace of the rendered image. To convert the colorspace of the layers, use Convert Image Colorspace.</p>"
"<p>Set how much you wish to correct the adaptation state. This will affect how <span style=\" font-style:italic;\">Absolute Colorimetric</span> changes the whites of your image. In Layman's terms: how much do you wish to have the color management correct the paper-color to screen white while using <span style=\" font-style:italic;\">Absolute Colorimetric</span>?</p>"
"<p>Black Point compensation matches the darkest color of the source device to the darkest color of the destination device. Relative Colorimetric without Black Point Compensation will show the difference between the darkest values. With blackpoint compensation, black is black.</p>"
"<p>When rendering animation frames (into files or during animation cache regeneration), Krita will make the specified number of copies of your image and will work on them in parallel. Each copy will demand more RAM for its storage (about 20% of the size of you image), so raise this limit only if you have enough RAM installed.</p>"
"<p><br/>"
"</p>"
"<p><span style=\" font-weight:600;\">Recommended value:</span> set Clones Limit to the number of <span style=\" text-decoration: underline;\">physical</span> (non-hyperthreaded) cores your CPU has</p>"
"<p>Krita will try to limit the number of screen updates per second to the given number. A lower number will decrease visual responsiveness but increase stylus precision on some systems like macOS."
"<p>When performance logging is enabled Krita saves timing information into the '<working_dir>/log' folder. If you experience performance problems and want to help us, enable this option and add the contents of the directory to a bug report.</p>"
"<p>Animation frame cache will be stored in RAM completely without any limitations</p>"
"<p><span style=\" font-weight:600;\">WARNING:</span> please make sure your computer has enough RAM <span style=\" text-decoration: underline;\">above</span> the amount you requested in General tab. Otherwise you might face system freezes.</p>"
"<p>* for 1 second of FullHD@25fps video you need extra 200 MiB of memory</p>"
"<p>* for 1 second of 4K UltraHD@25fps video you need extra 800 MiB of memory</p>"
"<p>Animation frames are stored on hard disk in the same folder as swap file. The cache is stored in a compressed way. Little amount of extra RAM is needed.</p>"
"<p>Since data transfer speed of the hard drive is low, you might want to limit cached frame size to be able to play your video at 25 fps. The limit of 2500 px is usually a good choice.</p>"
"<p>Render scaled down version of the frame if the image is bigger than the provided limit. Make sure you enable this option when using on-disk storage backend.</p>"
"<p>Choose the optional emblem icon that indicates extra information, such as the preset being a special effects brush, or just using tilt, or angled in some way.</p>"
msgid "The <i>Alternate Invocation</i> action performs an alternate action with the current tool. For example, using the brush tool it picks a color from the canvas."
"<p>The driver for your drawing tablet and Windows do not agree on the size of the screen your tablet is connected to. Please select the right option.</p>"
msgid "A spot color is a color that the printer is able to print without mixing the paints it has available to it. The opposite is called a process color."
"You enabled OpenColorIO based color management, but your image is not an RGB image.\n"
"OpenColorIO-based color management only works with RGB images.\n"
"Please check the settings in the LUT docker.\n"
"OpenColorIO will now be deactivated."
msgstr ""
#. +> trunk5 stable5
#: libs/ui/opengl/kis_opengl_win.cpp:116
#, kde-format
msgid "The Intel graphics driver in use is known to have issues with OpenGL."
msgstr ""
#. +> trunk5 stable5
#: libs/ui/opengl/kis_opengl_win.cpp:118
#, kde-format
msgid "Intel graphics drivers tend to have issues with OpenGL so ANGLE will be used by default. You may manually switch to OpenGL but it is not guaranteed to work properly."
msgstr ""
#. +> trunk5 stable5
#: libs/ui/opengl/kis_opengl_win.cpp:248
#, kde-format
msgid "The graphics driver in use does not meet the OpenGL requirements."
msgstr ""
#. +> trunk5 stable5
#: libs/ui/opengl/kis_opengl_win.cpp:250
#, kde-format
msgid "The graphics driver in use may not work well with OpenGL."
msgstr ""
#. +> trunk5 stable5
#: libs/ui/opengl/kis_opengl_win.cpp:262
#, kde-format
msgid "ANGLE is using a software Direct3D renderer, which is not hardware-accelerated and may be very slow. This can happen if the graphics drivers are not properly installed, or when using a Remote Desktop session."
#. i18nc("Who made the profile?","Manufacturer: ") + currentColorSpace()->profile()->manufacturer() + "</p>"); //This would work if people actually wrote the manufacturer into the manufacturer fiedl...
"<b><a href=\"https://en.wikipedia.org/wiki/RGB_color_space\">RGB (Red, Green, Blue)</a></b>, is the color model used by screens and other light-based media.<br/>"
"RGB is an additive color model: adding colors together makes them brighter. This color model is the most extensive of all color models, and is recommended as a model for painting,that you can later convert to other spaces. RGB is also the recommended colorspace for HDR editing."
"<b><a href=\"https://en.wikipedia.org/wiki/CMYK_color_model\">CMYK (Cyan, Magenta, Yellow, Key)</a></b>, is the model used by printers and other ink-based media.<br/>"
"CMYK is a subtractive model, meaning that adding colors together will turn them darker. Because of CMYK profiles being very specific per printer, it is recommended to work in RGB space, and then later convert to a CMYK profile, preferably one delivered by your printer. <br/>"
"CMYK is <b>not</b> recommended for painting.Unfortunately, Krita cannot retrieve colorants or the TRC for this space."
msgid "<b><a href=\"https://en.wikipedia.org/wiki/CIE_1931_color_space\">CIE XYZ</a></b>is the space determined by the CIE as the space that encompasses all other colors, and used to convert colors between profiles. XYZ is an additive color model, meaning that adding colors together makes them brighter. XYZ is <b>not</b> recommended for painting, but can be useful to encode in. The Tone Response Curve is assumed to be linear."
"<b><a href=\"https://en.wikipedia.org/wiki/Grayscale\">Grayscale</a></b> only allows for gray values and transparent values. Grayscale images use half the memory and disk space compared to an RGB image of the same bit-depth.<br/>"
"Grayscale is useful for inking and greyscale images. In Krita, you can mix Grayscale and RGB layers in the same image."
"<b><a href=\"https://en.wikipedia.org/wiki/Lab_color_space\">L*a*b</a></b>. <b>L<b> stands for Lightness, the <b>a</b> and <b>b</b> components represent color channels.<br/>"
"L*a*b is a special model for color correction. It is based on human perception, meaning that it tries to encode the difference in lightness, red-green balance and yellow-blue balance. This makes it useful for color correction, but the vast majority of color maths in the blending modes do <b>not</b> work as expected here.<br/>"
"Similarly, Krita does not support HDR in LAB, meaning that HDR images converted to LAB lose color information. This colorspace is <b>not</b> recommended for painting, nor for export, but best as a space to do post-processing in. The TRC is assumed to be the L* TRC."
msgid "<b><a href=\"https://en.wikipedia.org/wiki/YCbCr\">YCbCr (Luma, Blue Chroma, Red Chroma)</a></b>, is a model designed for video encoding. It is based on human perception, meaning that it tries to encode the difference in lightness, red-green balance and yellow-blue balance. Chroma in this case is then a word indicating a special type of saturation, in these cases the saturation of Red and Blue, of which the desaturated equivalents are Green and Yellow respectively. It is available to open up certain images correctly, but Krita does not currently ship a profile for this due to lack of open source ICC profiles for YCrCb."
msgid "<b>8 bit integer</b>: The default number of colors per channel. Each channel will have 256 values available, leading to a total amount of colors of 256 to the power of the number of channels. Recommended to use for images intended for the web, or otherwise simple images."
msgid "<b>16 bit integer</b>: Also known as 'deep color'. 16 bit is ideal for editing images with a linear TRC, large color space, or just when you need more precise color blending. This does take twice as much space on the RAM and hard-drive than any given 8 bit image of the same properties, and for some devices it takes much more processing power. We recommend watching the RAM usage of the file carefully, or otherwise use 8 bit if your computer slows down. Take care to disable conversion optimization when converting from 16 bit/channel to 8 bit/channel."
msgctxt "When the selected Bitdepth is 16 bit float"
msgid "<b>16 bit floating point</b>: Also known as 'Half Floating Point', and the standard in VFX industry images. 16 bit float is ideal for editing images with a linear Tone Response Curve, large color space, or just when you need more precise color blending. It being floating point is an absolute requirement for Scene Referred (HDR) images. This does take twice as much space on the RAM and hard-drive than any given 8 bit image of the same properties, and for some devices it takes much more processing power. We recommend watching the RAM usage of the file carefully, or otherwise use 8 bit if your computer slows down."
msgctxt "When the selected Bitdepth is 32bit float"
msgid "<b>32 bit float point</b>: Also known as 'Full Floating Point'. 32 bit float is ideal for editing images with a linear TRC, large color space, or just when you need more precise color blending. It being floating point is an absolute requirement for Scene Referred (HDR) images. This does take four times as much space on the RAM and hard-drive than any given 8 bit image of the same properties, and for some devices it takes much more processing power. We recommend watching the RAM usage of the file carefully, or otherwise use 8 bit if your computer slows down."
msgctxt "When the selected Bitdepth is 64bit float, but this isn't actually available in Krita at the moment."
msgid "<b>64 bit float point</b>: 64 bit float is as precise as it gets in current technology, and this depth is used most of the time for images that are generated or used as an input for software. It being floating point is an absolute requirement for Scene Referred (HDR) images. This does take eight times as much space on the RAM and hard-drive than any given 8 bit image of the same properties, and for some devices it takes much more processing power. We recommend watching the RAM usage of the file carefully, or otherwise use 8 bit if your computer slows down."
msgctxt "These are Elle Stone's notes on her profiles that we ship."
msgid ""
"<p><b>Extra notes on profiles by Elle Stone:</b></p>"
"<p><i>Krita comes with a number of high quality profiles created by <a href=\"http://ninedegreesbelow.com\">Elle Stone</a>. This is a summary. Please check <a href=\"http://ninedegreesbelow.com/photography/lcms-make-icc-profiles.html\">the full documentation</a> as well.</i></p>"
msgid "<p>Quoting Wikipedia, 'Academy Color Encoding System (ACES) is a color image encoding system proposed by the Academy of Motion Picture Arts and Sciences that will allow for a fully encompassing color accurate workflow, with 'seamless interchange of high quality motion picture images regardless of source'.</p>"
msgid "<p>The ACEScg color space is smaller than the ACES color space, but large enough to contain the 'Rec-2020 gamut and the DCI-P3 gamut', unlike the ACES color space it has no negative values and contains only few colors that fall just barely outside the area of real colors humans can see</p>"
"<p>To avoid possible copyright infringement issues, I used 'ClayRGB' (following ArgyllCMS) as the base name for these profiles. As used below, 'Compatible with Adobe RGB 1998' is terminology suggested in the preamble to the AdobeRGB 1998 color space specifications.</p>"
"<p>The Adobe RGB 1998 color gamut covers a higher percentage of real-world cyans, greens, and yellow-greens than sRGB, but still doesn't include all printable cyans, greens, yellow-greens, especially when printing using today's high-end, wider gamut, ink jet printers. BetaRGB (not included in the profile pack) and Rec.2020 are better matches for the color gamuts of today's wide gamut printers.</p>"
"<p>The Adobe RGB 1998 color gamut is a reasonable approximation to some of today's high-end wide gamut monitors.</p>"
"<p>This profile's color gamut is roughly the same size and shape as the ACES color space gamut, and like the ACES color space, AllColorsRGB holds all possible real colors. But AllColorsRGB actually has a slightly larger color gamut (to capture some fringe colors that barely qualify as real when viewed by the standard observer) and uses the D50 white point.</p>"
"<p>Just like the ACES color space, AllColorsRGB holds a high percentage of imaginary colors. See the Completely <a href=\"http://ninedegreesbelow.com/photography/xyz-rgb.html\">Painless Programmer's Guide to XYZ, RGB, ICC, xyY, and TRCs</a> for more information about imaginary colors.</p>"
"<p>There is no particular reason why anyone would want to use this profile for editing, unless one needs to make sure your color space really does hold all possible real colors.</p>"
"<p>This profile is included mostly for its historical significance. It's the color space that was used in the original color matching experiments that led to the creation of the XYZ reference color space.</p>"
"<p>The ASTM E white point is probably the right E white point to use when making the CIERGB color space profile. It's not clear to me what the correct CIERGB primaries really are. Lindbloom gives one set. The LCMS version 1 tutorial gives a different set. Experts in the field contend that the real primaries should be calculated from the spectral wavelengths, so I did.</p>"
msgid "<p>The IdentityRGB working space is included in the profile pack because it's a mathematically obvious way to include all possible visible colors, though it has a higher percentage of imaginary colors than the ACES and AllColorsRGB color spaces. I cannot think of any reason why you'd ever want to actually edit images in the IdentityRGB working space.</p>"
"<p>To avoid possible copyright infringement issues, I used 'LargeRGB' (following RawTherapee) as the base name for these profiles."
"<p>Kodak designed the RIMM/ROMM (ProPhotoRGB) color gamut to include all printable and most real world colors. It includes some imaginary colors and excludes some of the real world blues and violet blues that can be captured by digital cameras. It also excludes some very saturated 'camera-captured' yellows as interpreted by some (and probably many) camera matrix input profiles."
"<p>The ProPhotoRGB primaries are hard-coded into Adobe products such as Lightroom and the Dng-DCP camera 'profiles'. However, other than being large enough to hold a lot of colors, ProPhotoRGB has no particular merit as an RGB working space. Personally and for most editing purposes, I recommend BetaRGB, Rec2020, or the ACEScg profiles ProPhotoRGB.</p>"
msgid "<p>Rec.2020 is the up-and-coming replacement for the thoroughly outdated sRGB color space. As of June 2015, very few (if any) display devices (and certainly no affordable display devices) can display all of Rec.2020. However, display technology is closing in on Rec.2020, movies are already being made for Rec.2020, and various cameras offer support for Rec.2020. And in the digital darkroom Rec.2020 is much more suitable as a general RGB working space than the exceedingly small sRGB color space.</p>"
"<p>Hewlett-Packard and Microsoft designed sRGB to match the color gamut of consumer-grade CRTs from the 1990s. sRGB is the standard color space for the world wide web and is still the best choice for exporting images to the internet.</p>"
"<p>The sRGB color gamut was a good match to calibrated decent quality CRTs. But sRGB is not a good match to many consumer-grade LCD monitors, which often cannot display the more saturated sRGB blues and magentas (the good news: as technology progresses, wider gamuts are trickling down to consumer grade monitors).</p>"
"<p>Printer color gamuts can easily exceed the sRGB color gamut in cyans, greens, and yellow-greens. Colors from interpolated camera raw files also often exceed the sRGB color gamut.</p>"
"<p>As a very relevant aside, using perceptual intent when converting to sRGB does not magically makes otherwise out of gamut colors fit inside the sRGB color gamut! The standard sRGB color space (along with all the other the RGB profiles provided in my profile pack) is a matrix profile, and matrix profiles don't have perceptual intent tables.</p>"
"<p>To avoid possible copyright infringement issues, I used 'WideRGB' as the base name for these profiles.</p>"
"<p>WideGamutRGB was designed by Adobe to be a wide gamut color space that uses spectral colors as its primaries. Pascale's primary values produce a profile that matches old V2 Widegamut profiles from Adobe and Canon. It is an interesting color space, but shortly after its introduction, Adobe switched their emphasis to the ProPhotoRGB color space.</p>"
msgid "<p>These profiles are for use with RGB images that have been converted to monotone gray (black and white). The main reason to convert from RGB to Gray is to save the file space needed to encode the image. Google places a premium on fast-loading web pages, and images are one of the slower-loading elements of a web page. So converting black and white images to Grayscale images does save some kilobytes. For grayscale images uploaded to the internet, convert the image to the V2 Gray profile with the sRGB TRC.</p>"
msgid "<p>The profiles that end in '-g10.icc' are linear gamma (gamma=1.0, 'linear light', etc) profiles and should only be used when editing at high bit depths (16-bit floating point, 16-bit integer, 32-bit floating point, 32-bit integer). Many editing operations produce better results in linear gamma color spaces.</p>"
msgid "<p>The profiles that end in '-labl.icc' have perceptually uniform TRCs. A few editing operations really should be done on perceptually uniform RGB. Make sure you use the V4 versions for editing high bit depth images.</p>"
msgid "<p>The profiles that end in '-srgbtrc.icc', '-g22.icc', and '-bt709.icc' have approximately but not exactly perceptually uniform TRCs. ProPhotoRGB's gamma=1.8 TRC is not quite as close to being perceptually uniform.</p>"
msgid "<p>When editing 8-bit images, you should use a profile with a small color gamut and an approximately or exactly perceptually uniform TRC. Of the profiles supplied in my profile pack, only the sRGB and AdobeRGB1998 (ClayRGB) color spaces are small enough for 8-bit editing. Even with the AdobeRGB1998 color space you need to be careful to not cause posterization. And of course you cannot use the linear gamma versions of these profiles for 8-bit editing.</p>"
msgid "<p>Use V4 profiles for editing images using high bit depth image editors that use LCMS as the Color Management Module. This includes Krita, digiKam/showFoto, and GIMP 2.9.</p>"
"Linear gamma RGB color spaces are not supposed to be used in 8-bit integer modes. It is suggested to use 16-bit integer or any floating point colorspace for linear profiles.\n"
"\n"
"Press \"Ok\" to create a 8-bit integer linear RGB color space or \"Cancel\" to return to the settings dialog."
msgstr ""
#. +> stable5
#: libs/ui/widgets/kis_custom_image_widget.cc:268
#, kde-format
msgid ""
"Linear gamma RGB color spaces are not supposed to be used in 8-bit integer modes. It is suggested to use 16-bit integer or any floating point colorspace for linear profiles.\n"
"\n"
"Press \"Continue\" to create a 8-bit integer linear RGB color space or \"Cancel\" to return to the settings dialog."
msgstr ""
#. +> trunk5 stable5
#: libs/ui/widgets/kis_custom_image_widget.cc:502
#, kde-format
msgid "bytes"
msgstr ""
#. +> trunk5 stable5
#: libs/ui/widgets/kis_custom_image_widget.cc:505
#, kde-format
msgctxt "Abbreviation for kilobyte"
msgid "KB"
msgstr ""
#. +> trunk5 stable5
#: libs/ui/widgets/kis_custom_image_widget.cc:509
#, kde-format
msgctxt "Abbreviation for megabyte"
msgid "MB"
msgstr ""
#. +> trunk5 stable5
#: libs/ui/widgets/kis_custom_image_widget.cc:513
#, kde-format
msgctxt "Abbreviation for gigabyte"
msgid "GB"
msgstr ""
#. +> trunk5 stable5
#: libs/ui/widgets/kis_custom_image_widget.cc:516
#, kde-format
msgctxt "arg1: width. arg2: height. arg3: colorspace name. arg4: size of a channel in bits. arg5: size in unites of arg6. Arg6: KB, MB or GB"
msgid "This document will be %1 pixels by %2 pixels in %3, which means the pixel size is %4 bit. A single paint layer will thus take up %5 %6 of RAM."
"<html><b>KDE</b> is a world-wide network of software engineers, artists, writers, translators and facilitators who are committed to <a href=\"%1\">Free Software</a> development. This community has created hundreds of Free Software applications as part of the KDE frameworks, workspaces and applications.<br />"
"<br />"
"KDE is a cooperative enterprise in which no single entity controls the efforts or products of KDE to the exclusion of others. Everyone is welcome to join and contribute to KDE, including you.<br />"
"<br />"
"Visit <a href=\"%2\">%2</a> for more information about the KDE community and the software we produce.</html>"
"<html>Software can always be improved, and the KDE team is ready to do so. However, you - the user - must tell us when something does not work as expected or could be done better.<br />"
"<br />"
"KDE has a bug tracking system. Visit <a href=\"%1\">%1</a> or use the \"Report Bug...\" dialog from the \"Help\" menu to report bugs.<br />"
"<br />"
"If you have a suggestion for improvement then you are welcome to use the bug tracking system to register your wish. Make sure you use the severity called \"Wishlist\".</html>"
"<html>You do not have to be a software developer to be a member of the KDE team. You can join the national teams that translate program interfaces. You can provide graphics, themes, sounds, and improved documentation. You decide!<br />"
"<br />"
"Visit <a href=\"%1\">%1</a> for information on some projects in which you can participate.<br />"
"<br />"
"If you need more information or documentation, then a visit to <a href=\"%2\">%2</a> will provide you with what you need.</html>"
"<html>KDE software is and will always be available free of charge, however creating it is not free.<br />"
"<br />"
"To support development the KDE community has formed the KDE e.V., a non-profit organization legally founded in Germany. KDE e.V. represents the KDE community in legal and financial matters. See <a href=\"%1\">%1</a> for information on KDE e.V.<br />"
"<br />"
"KDE benefits from many kinds of contributions, including financial. We use the funds to reimburse members and others for expenses they incur when contributing. Further funds are used for legal support and organizing conferences and meetings. <br />"
" <br />"
"We would like to encourage you to support our efforts with a financial donation, using one of the ways described at <a href=\"%2\">%2</a>.<br />"
"<br />"
"Thank you very much in advance for your support.</html>"
msgid "<qt>To submit a bug report, click on the button below. This will open a web browser window on <a href=\"http://bugs.kde.org\">http://bugs.kde.org</a> where you will find a form to fill in. The information displayed above will be transferred to that server.</qt>"
msgid "Here you can see a list of key bindings, i.e. associations between actions (e.g. 'Copy') shown in the left column and keys or combination of keys (e.g. Ctrl+V) shown in the right column."
msgid "Values goes from black to white, or black to the most saturated colour. Saturation, in turn, goes from the most saturated colour to white, grey or black."
"<p>This sets the gamma value that the linearised HSY Luminosity is crunched with. 1 makes the selector fully linear, 2.2 is a practical default value.</p>"
msgid "The location of FFmpeg is unknown. Please install FFmpeg first: Krita cannot render animations without FFmpeg. (<a href=\"https://www.ffmpeg.org\">www.ffmpeg.org</a>)"
msgid "Krita tries to automatically check or uncheck this based on the information it can get from the profile you are converting from and the profile you are converting to."
msgid "The icon associated with this action. It is shown alongside text in the menu bar and in toolbars as required. A string to use KDE's image loading system, or a custom QPixmap or QIcon, or None."
msgid "<p>Failed to check version of dependency <application>%1</application>: Module do not have PEP396 <code>__version__</code> attribute. It is not disabled, but behaviour is unpredictable...</p>"
"<p>Select the location of the G'Mic-Qt plugin. You can download the plugin from the <a href=\"http://gmic.eu/\"><span style=\" text-decoration: underline; color:#2980b9;\">G'Mic website</span></a>. Make sure you download the special version for Krita, not the standalone or the GIMP version.</p>"
msgid "The formula decides how the kernel is created, so different formulas choose different values in the kernel, and thus give subtly different results."
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-family:'MS Shell Dlg 2'; font-size:8pt;\">This is a line of text before the inserted text. This is a line of inserted text. This is a line after the inserted text.</span></p>"
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-family:'MS Shell Dlg 2'; font-size:8pt;\">This is a line of text before the deleted text. This is a line of deleted text. This is a line after the deleted text.</span></p>"
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-family:'MS Shell Dlg 2'; font-size:8pt;\">This is a line of text before the format-change text. This is a line of text whose format has been changed. This is a line of text after the format-change text.</span></p>"
"<p style=\" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">It is possible to assign a named style to text and alter the style properties to change all text with that style.</p>"
"\n"
"<p style=\" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Applying a style change will reformat all text that previously got the named style assigned to it. Use the Styles docker to apply styles to text.</p>"
"The image contains pixels with zero alpha channel and non-zero color channels. Krita has modified those pixels to have at least some alpha. The initial values will <i>not</i> be reverted on saving the image back.<br/>"
"<br/>"
"This will hardly make any visual difference just keep it in mind."
msgstr ""
#. +> trunk5 stable5
#: plugins/impex/exr/exr_converter.cc:877
#, kde-format
msgctxt "@title:window"
msgid "EXR image has been modified"
msgstr ""
#. +> trunk5 stable5
#: plugins/impex/exr/exr_converter.cc:1244
#, kde-format
msgctxt "@item:unsupported-node-message"
msgid "%1 (type: \"%2\")"
msgstr ""
#. +> trunk5 stable5
#: plugins/impex/exr/exr_converter.cc:1249
#, kde-format
msgctxt "@info"
msgid ""
"<p>The following layers have a type that is not supported by EXR format:</p>"
"<r>"
"<ul>%1</ul>"
"</p>"
"<p><warning>these layers have <b>not</b> been saved to the final EXR file</warning></p>"
msgstr ""
#. +> trunk5 stable5
#: plugins/impex/exr/exr_export.cc:87
#, kde-format
msgid "This layer cannot be saved to EXR."
msgstr ""
#. +> trunk5 stable5
#: plugins/impex/exr/exr_export.cc:91
#, kde-format
msgid "The layer does not have an image associated with it."
msgstr ""
#. +> trunk5 stable5
#: plugins/impex/exr/exr_export.cc:95
#, kde-format
msgid "The filename is empty."
msgstr ""
#. +> trunk5 stable5
#: plugins/impex/exr/exr_export.cc:99
#, kde-format
msgid "EXR images cannot be saved remotely."
msgstr ""
#. +> trunk5 stable5
#: plugins/impex/exr/exr_export.cc:103
#, kde-format
msgid "Colorspace not supported: EXR images must be 16 or 32 bits floating point RGB."
msgid "This option will merge all layers. It is advisable to check this option, otherwise other applications might not be able to read your file correctly."
msgid "Indexed PNG images are smaller. If you enabled this option, your image will be analyzed to see whether it is possible to save as an indexed PNG."
"<p><span style=\" font-weight:600;\">PNG</span> files have <span style=\" font-style:italic;\">two</span> options to save <span style=\" font-weight:600;\">sRGB</span> information: as a tag or as an explicit profile. For use with in websites, <span style=\" font-style:italic;\">disable</span> this option. For interchange with other applications, <span style=\" font-style:italic;\">enable</span> this option.</p>"
"<p>If enabled, all RAW files will be decoded in 16-bit color depth using a linear gamma curve. To prevent dark picture rendering in the editor, it is recommended to use Color Management in this mode.</p>"
"<p>If disabled, all RAW files will be decoded in 8-bit color depth with a BT.709 gamma curve and a 99th-percentile white point. This mode is faster than 16-bit decoding.</p>"
"<p>The default is to assume that all green pixels are the same. If even-row green pixels are more sensitive to ultraviolet light than odd-row this difference causes a mesh pattern in the output; using this option solves this problem with minimal loss of detail.</p>"
"<p>To resume, this option blurs the image a little, but it eliminates false 2x2 mesh patterns with VNG quality method or mazes with AHD quality method.</p>"
"<p>For Fuji Super CCD cameras, show the image tilted 45 degrees. For cameras with non-square pixels, do not stretch the image to its correct aspect ratio. In any case, this option guarantees that each output pixel corresponds to one RAW pixel.</p>"
"<p>Select here the demosaicing method to use when decoding RAW images. A demosaicing algorithm is a digital image process used to interpolate a complete image from the partial raw data received from the color-filtered image sensor, internal to many digital cameras, in form of a matrix of colored pixels. Also known as CFA interpolation or color reconstruction, another common spelling is demosaicing. The following methods are available for demosaicing RAW images:</p>"
"<p>"
"<ul>"
"<li><emphasis strong='true'>Bilinear</emphasis>: use high-speed but low-quality bilinear interpolation (default - for slow computers). In this method, the red value of a non-red pixel is computed as the average of the adjacent red pixels, and similarly for blue and green.</li>"
"<li><emphasis strong='true'>VNG</emphasis>: use Variable Number of Gradients interpolation. This method computes gradients near the pixel of interest and uses the lower gradients (representing smoother and more similar parts of the image) to make an estimate.</li>"
"<li><emphasis strong='true'>PPG</emphasis>: use Patterned-Pixel-Grouping interpolation. Pixel Grouping uses assumptions about natural scenery in making estimates. It has fewer color artifacts on natural images than the Variable Number of Gradients method.</li>"
"<li><emphasis strong='true'>AHD</emphasis>: use Adaptive Homogeneity-Directed interpolation. This method selects the direction of interpolation so as to maximize a homogeneity metric, thus typically minimizing color artifacts.</li>"
"<li><emphasis strong='true'>DCB</emphasis>: DCB interpolation from linuxphoto.org project.</li>"
"<li><emphasis strong='true'>AHD v2</emphasis>: modified AHD interpolation using Variance of Color Differences method.</li>"
"<li><emphasis strong='true'>AFD</emphasis>: Adaptive Filtered Demosaicing interpolation through 5 pass median filter from PerfectRaw project.</li>"
"<li><emphasis strong='true'>VCD</emphasis>: Variance of Color Differences interpolation.</li>"
"<li><emphasis strong='true'>VCD & AHD</emphasis>: Mixed demosaicing between VCD and AHD.</li>"
"<li><emphasis strong='true'>LMMSE</emphasis>: color demosaicing via directional linear minimum mean-square error estimation interpolation from PerfectRaw.</li>"
"<li><emphasis strong='true'>AMaZE</emphasis>: Aliasing Minimization interpolation and Zipper Elimination to apply color aberration removal from RawTherapee project.</li>"
"</ul>"
"</p>"
"<p>Note: some methods can be unavailable if RAW decoder have been built without extension packs.</p>"
"<p>Set here the passes used by the median filter applied after interpolation to Red-Green and Blue-Green channels.</p>"
"<p>This setting is only available for specific Quality options: <emphasis strong='true'>Bilinear</emphasis>, <emphasis strong='true'>VNG</emphasis>, <emphasis strong='true'>PPG</emphasis>, <emphasis strong='true'>AHD</emphasis>, <emphasis strong='true'>DCB</emphasis>, and <emphasis strong='true'>VCD & AHD</emphasis>.</p>"
"<li><emphasis strong='true'>Default D65</emphasis>: Use a standard daylight D65 white balance.</li>"
"<li><emphasis strong='true'>Camera</emphasis>: Use the white balance specified by the camera. If not available, reverts to default neutral white balance.</li>"
"<li><emphasis strong='true'>Automatic</emphasis>: Calculates an automatic white balance averaging the entire image.</li>"
"<li><emphasis strong='true'>Manual</emphasis>: Set a custom temperature and green level values.</li>"
msgid "<p>If enabled, images with overblown channels are processed much more accurately, without 'pink clouds' (and blue highlights under tungsten lamps).</p>"
"<p>Select here the noise reduction method to apply during RAW decoding.</p>"
"<p>"
"<ul>"
"<li><emphasis strong='true'>None</emphasis>: no noise reduction.</li>"
"<li><emphasis strong='true'>Wavelets</emphasis>: wavelets correction to erase noise while preserving real detail. It's applied after interpolation.</li>"
"<li><emphasis strong='true'>FBDD</emphasis>: Fake Before Demosaicing Denoising noise reduction. It's applied before interpolation.</li>"
"<li><emphasis strong='true'>CFA Line Denoise</emphasis>: Banding noise suppression. It's applied after interpolation.</li>"
"<li><emphasis strong='true'>Impulse Denoise</emphasis>: Impulse noise suppression. It's applied after interpolation.</li>"
"<p>If this option is turned on, it will try to shift image channels slightly and evaluate Chromatic Aberration change. Note that if you shot blue-red pattern, the method may fail. In this case, disable this option and tune manually color factors.</p>"
"<p>Select here the output color space used to decode RAW data.</p>"
"<p>"
"<ul>"
"<li><emphasis strong='true'>Raw (no profile)</emphasis>: in this mode, no output color space is used during RAW decoding.</li>"
"<li><emphasis strong='true'>sRGB</emphasis>: this is an RGB color space, created cooperatively by Hewlett-Packard and Microsoft. It is the best choice for images destined for the Web and portrait photography.</li>"
"<li><emphasis strong='true'>Adobe RGB</emphasis>: this color space is an extended RGB color space, developed by Adobe. It is used for photography applications such as advertising and fine art.</li>"
"<li><emphasis strong='true'>Wide Gamut</emphasis>: this color space is an expanded version of the Adobe RGB color space.</li>"
"<li><emphasis strong='true'>Pro-Photo</emphasis>: this color space is an RGB color space, developed by Kodak, that offers an especially large gamut designed for use with photographic outputs in mind.</li>"
"<li><emphasis strong='true'>Custom</emphasis>: use a custom output color space profile.</li>"
"<p>Select here the output color space used to decode RAW data.</p>"
"<p>"
"<ul>"
"<li><emphasis strong='true'>Raw (linear)</emphasis>: in this mode, no output color space is used during RAW decoding.</li>"
"<li><emphasis strong='true'>sRGB</emphasis>: this is an RGB color space, created cooperatively by Hewlett-Packard and Microsoft. It is the best choice for images destined for the Web and portrait photography.</li>"
"<li><emphasis strong='true'>Adobe RGB</emphasis>: this color space is an extended RGB color space, developed by Adobe. It is used for photography applications such as advertising and fine art.</li>"
"<li><emphasis strong='true'>Wide Gamut</emphasis>: this color space is an expanded version of the Adobe RGB color space.</li>"
"<li><emphasis strong='true'>Pro-Photo</emphasis>: this color space is an RGB color space, developed by Kodak, that offers an especially large gamut designed for use with photographic outputs in mind.</li>"
"<li><emphasis strong='true'>Custom</emphasis>: use a custom output color space profile.</li>"
msgid "This determines every interval after which the precision should change. For example: if the delta value is set to be 15.00, after every 15 pts change in the size of brush, the precision will change."
msgid "If checked, grid brush fill every particle's background with background color. The background of particle is rectangle of grid width and height and by default it is transparent."
"<p><b>Painting mode</b>: Krita offers a choice between two painting modes: <i>buildup</i> and <i>wash</i>. The first choice builds up color while painting in one stroke, the second choices gives you an even color in one stroke even if you go over the same place again and again.</p>"
+msgid "These are keywords that can be used to identify text layers. A layer only needs to contain the keyword to be recognised. Keywords should be comma separated."
+msgid "These are keywords that can be used to identify panel layers. A layer only needs to contain the keyword to be recognised. Keywords should be comma separated."
+msgid "Whether the acbf file is an adaption of an existing source, and if so, how to find information about that source. So for example, for an adapted webcomic, the official website url should go here."
+msgid "By default this will be filled with a generated universal unique identifier. The ID by itself is merely so that comic book library management programs can figure out if this particular comic is already in their database and whether it has been rated. Of course, the UUID can be changed into something else by manually changing the json, but this is advanced usage."
+msgid "The genre of the work. Prefilled values are from the ACBF, but you can fill in your own. Separate genres with commas. Try to limit the amount to about two or three"
+msgid "The following is a table of the authors that contributed to this comic. You can set their nickname, proper names (first, middle, last), Role (Penciller, Inker, etc), email and homepage."
+msgid "If there's an entry in a comics data base, that should be added here. It is unlikely to be a factor for comics from scratch, but useful when doing a conversion."
+msgid "The location for extra autocompletion keys in the meta-data editor. Point this at a folder containing key_characters/key_format/key_genre/key_rating/key_author_roles/key_other with inside txt files(csv for tating) containing the extra auto-completion keys, each on a new line. This path is stored in the krita configuration, and not the project configuration."
+msgid "If you cannot come up with a project name, our highly sophisticated project name generator will serve to give a classy yet down to earth name."
+msgid "This allows you to select a generic comics project directory, in which a new folder will be made for the project using the given project name."
+"This allows you to make a template document with guides.\n"
+"The width and height are the size of the live-area, the safe area is the live area minus the margins, and the full image is the live area plus the bleeds."
"<p>Your name for your script. This is used to calculate the name of your package, the name of the class in your package and the associated directory.</p>"
"<p>What you want to appear in the Tools-> Scripts menu. If you leave this blank a default entry will be created based on the name of the script. </p>"
"<p>If this is checked your script will be automatically enabled in Krita. That is, it will show up in the Scripts menu or docker list. If not, you will need to manually enable the script through the Krita->Settings menu entry. </p>"
msgid "<nobr>Blending controls the percentage of color that is picked</nobr> and mixed with your current brush color. A full blending value picks colors completely, ignoring brush color."
"<p>In \"Global Coordinates\" mode Width and Height fields show the size of the shape's bounding box in image-aligned coordinates, even when the shape is rotated or has any other transform. </p>"
"<p>If \"Global Coordinates\" mode is disabled, Width and Height fields show the shape's \"local\" size, before application of any transformations.</p>"
msgid "Sorry, Krita was built without the support of GNU Scientific Library, so you cannot scale the selection with handles. Please compile Krita with GNU Scientific Library support, or use options widget for editing scale values manually."
msgid "Switch between Build Up and Wash mode of painting. Build Up mode adds deformations one on top of the other without any limits. Wash mode gradually deforms the piece to the selected deformation level."
msgid "<b>Useractions</b> can be grouped in categories for better distinction. Choose a existing <i>Category</i> or create a new one by entering a name."
"<p>The <i>Command</i> defines the command that will be executed when the <b>Useraction</b> is used. It can be a simple shell command or a complex sequence of multiple commands with <b>Placeholders</b>.</p>"
"The <i>Command</i> defines the command that will be executed when the <b>Useraction</b> is used. It can be a simple shell command or a complex sequence of multiple commands with <b>Placeholders</b>."
msgid "<qt>There was an error while running <b>%1</b>.</qt>"
msgstr ""
#. +> trunk5
#: krusader/Dialogs/checksumdlg.cpp:141
#, kde-format
msgid "Error reading stdout or stderr"
msgstr ""
#. +> trunk5
#: krusader/Dialogs/checksumdlg.cpp:198
#, kde-format
msgid "Please wait..."
msgstr ""
#. +> trunk5
#: krusader/Dialogs/checksumdlg.cpp:216
#, kde-format
msgid "<qt>Krusader cannot find a checksum tool that handles %1 on your system. Please check the <b>Dependencies</b> page in Krusader's settings.</qt>"
msgstr ""
#. +> trunk5
#: krusader/Dialogs/checksumdlg.cpp:254
#, kde-format
msgid "Creating Checksums"
msgstr ""
#. +> trunk5
#: krusader/Dialogs/checksumdlg.cpp:268
#, kde-format
msgid "Create Checksums"
msgstr ""
#. +> trunk5
#: krusader/Dialogs/checksumdlg.cpp:271
#, kde-format
msgid "About to calculate checksum for the following files or directories:"
msgid "The date %1 is not valid according to your locale. Please re-enter a valid date (use the date button for easy access)."
msgstr ""
#. +> trunk5
#: krusader/Filter/advancedfilter.cpp:492
#, kde-format
msgid "Specified sizes are inconsistent."
msgstr ""
#. +> trunk5
#: krusader/Filter/advancedfilter.cpp:493
#, kde-format
msgid "Please re-enter the values, so that the left side size will be smaller than (or equal to) the right side size."
msgstr ""
#. +> trunk5
#: krusader/Filter/advancedfilter.cpp:512
#: krusader/Filter/advancedfilter.cpp:540
#, kde-format
msgid "Dates are inconsistent."
msgstr ""
#. +> trunk5
#: krusader/Filter/advancedfilter.cpp:513
#, kde-format
msgid "The date on the left is later than the date on the right. Please re-enter the dates, so that the left side date will be earlier than the right side date."
msgstr ""
#. +> trunk5
#: krusader/Filter/advancedfilter.cpp:541
#, kde-format
msgid "The date on top is later than the date on the bottom. Please re-enter the dates, so that the top date will be earlier than the bottom date."
msgstr ""
#. +> trunk5
#: krusader/Filter/filterdialog.cpp:35
#, kde-format
msgid "Krusader::Choose Files"
msgstr ""
#. +> trunk5
#: krusader/Filter/filtertabs.cpp:42
#, kde-format
msgid "&General"
msgstr ""
#. +> trunk5
#: krusader/Filter/filtertabs.cpp:47
#, kde-format
msgid "&Advanced"
msgstr ""
#. +> trunk5
#: krusader/Filter/filtertabs.cpp:115
#, kde-format
msgid "Could not load profile."
msgstr ""
#. +> trunk5
#: krusader/Filter/generalfilter.cpp:49
#, kde-format
msgid "Any Character"
msgstr ""
#. +> trunk5
#: krusader/Filter/generalfilter.cpp:50
#, kde-format
msgid "Start of Line"
msgstr ""
#. +> trunk5
#: krusader/Filter/generalfilter.cpp:51
#, kde-format
msgid "End of Line"
msgstr ""
#. +> trunk5
#: krusader/Filter/generalfilter.cpp:52
#, kde-format
msgid "Set of Characters"
msgstr ""
#. +> trunk5
#: krusader/Filter/generalfilter.cpp:53
#, kde-format
msgid "Repeats, Zero or More Times"
msgstr ""
#. +> trunk5
#: krusader/Filter/generalfilter.cpp:54
#, kde-format
msgid "Repeats, One or More Times"
msgstr ""
#. +> trunk5
#: krusader/Filter/generalfilter.cpp:55
#, kde-format
msgid "Optional"
msgstr ""
#. +> trunk5
#: krusader/Filter/generalfilter.cpp:56
#, kde-format
msgid "Escape"
msgstr ""
#. +> trunk5
#: krusader/Filter/generalfilter.cpp:57
#, kde-format
msgid "TAB"
msgstr ""
#. +> trunk5
#: krusader/Filter/generalfilter.cpp:58
#, kde-format
msgid "Newline"
msgstr ""
#. +> trunk5
#: krusader/Filter/generalfilter.cpp:59
#, kde-format
msgid "Carriage Return"
msgstr ""
#. +> trunk5
#: krusader/Filter/generalfilter.cpp:60
#, kde-format
msgid "White Space"
msgstr ""
#. +> trunk5
#: krusader/Filter/generalfilter.cpp:61
#, kde-format
msgid "Digit"
msgstr ""
#. +> trunk5
#: krusader/Filter/generalfilter.cpp:108
#, kde-format
msgid "&Case sensitive"
msgstr ""
#. +> trunk5
#: krusader/Filter/generalfilter.cpp:113
#, kde-format
msgid "Search &for:"
msgstr ""
#. +> trunk5
#: krusader/Filter/generalfilter.cpp:127
#: krusader/Synchronizer/synchronizergui.cpp:220
#, kde-format
msgid ""
"<p>The filename filtering criteria is defined here.</p>"
"<p>You can make use of wildcards. Multiple patterns are separated by space (means logical OR) and patterns are excluded from the search using the pipe symbol.</p>"
"<p>If the pattern is ended with a slash (<code>*pattern*/</code>), that means that pattern relates to recursive search of folders."
"<ul>"
"<li><code>pattern</code> - means to search those files/folders that name is <code>pattern</code>, recursive search goes through all subfolders independently of the value of <code>pattern</code></li>"
"<li><code>pattern/</code> - means to search all files/folders, but recursive search goes through/excludes the folders that name is <code>pattern</code></li>"
"</ul>"
"</p>"
"<p>It is allowed to use quotation marks for names that contain space. Filter <code>\"Program Files\"</code> searches out those files/folders that name is <code>Program Files</code>.</p>"
"<p>Examples:</p>"
"<ul>"
"<li><code>*.o</code></li>"
"<li><code>*.h *.c??</code></li>"
"<li><code>*.cpp *.h | *.moc.cpp</code></li>"
"<li><code>* | .svn/ .git/</code></li>"
"</ul>"
"<p><b>Note</b>: the search term '<code>text</code>' is equivalent to '<code>*text*</code>'.</p>"
msgid "View the file in hex-mode (better for binary files)"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kggeneral.cpp:106
#, kde-format
msgid "Lister mode"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kggeneral.cpp:106
#, kde-format
msgid "View the file with lister (for huge text files)"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kggeneral.cpp:114
#, kde-format
msgid "Use Okteta as Hex viewer"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kggeneral.cpp:115
#, kde-format
msgid "If available, use Okteta as Hex viewer instead of the internal viewer"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kggeneral.cpp:121
#, kde-format
msgid "Use lister if the text file is bigger than:"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kggeneral.cpp:126
#, kde-format
msgid "MB"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kggeneral.cpp:138
#, kde-format
msgid "Editor"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kggeneral.cpp:142
#, kde-format
msgid "Editor:"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kggeneral.cpp:148
#, kde-format
msgid "Hint: use 'internal editor' if you want to use Krusader's fast built-in editor"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kggeneral.cpp:156
#, kde-format
msgid "Atomic extensions"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kggeneral.cpp:171
#, kde-format
msgid "Atomic extensions:"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kggeneral.cpp:221
#, kde-format
msgid "Warn on exit"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kggeneral.cpp:221
#, kde-format
msgid "Display a warning when trying to close the main window."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kggeneral.cpp:222
#, kde-format
msgid "Show and close to tray"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kggeneral.cpp:222
#, kde-format
msgid "Show an icon in the system tray and keep running in the background when the window is closed."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kggeneral.cpp:231
#, kde-format
msgid "Temp Folder:"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kggeneral.cpp:240
#, kde-format
msgid "Note: you must have full permissions for the temporary folder."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kggeneral.cpp:250
#, kde-format
msgid "Delete mode"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kggeneral.cpp:255
#, kde-format
msgid "Move to trash"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kggeneral.cpp:255
#, kde-format
msgid "Files will be moved to trash when deleted."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kggeneral.cpp:256
#, kde-format
msgid "Delete files"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kggeneral.cpp:256
#, kde-format
msgid "Files will be permanently deleted."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kggeneral.cpp:267
#: krusader/Panel/panelcontextmenu.cpp:191
#, kde-format
msgid "Terminal"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kggeneral.cpp:270
#, kde-format
msgid "External Terminal:"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kggeneral.cpp:275
#, kde-format
msgid "%d will be replaced by the workdir."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kggeneral.cpp:280
#, kde-format
msgid "Embedded Terminal sends Chdir on panel change"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kggeneral.cpp:280
#, kde-format
msgid "When checked, whenever the panel is changed (for example, by pressing Tab), Krusader changes the current folder in the embedded terminal."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kggeneral.cpp:302
#, kde-format
msgid "Searching for tools..."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kggeneral.cpp:304
#, kde-format
msgid "Make sure to install new tools in your <code>$PATH</code> (e.g. /usr/bin)"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kggeneral.cpp:312
#, kde-format
msgid "Add new atomic extension"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kggeneral.cpp:312
#, kde-format
msgid "Extension:"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kggeneral.cpp:317
#, kde-format
msgid "Atomic extensions must start with '.' and must contain at least one more '.' character."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:88
#, kde-format
msgid "Navigator bar"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:93
#, kde-format
msgid "Edit Mode by default"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:93
#, kde-format
msgid "Show editable path in Navigator bar by default"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:94
#, kde-format
msgid "Show full path by default"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:94
#, kde-format
msgid "Always show full path in Navigator bar by default."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:104
#, kde-format
msgid "Operation"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:108
#, kde-format
msgid "Autoselect folders"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:108
#, kde-format
msgid "When matching the select criteria, not only files will be selected, but also folders."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:109
#, kde-format
msgid "Rename selects extension"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:109
#, kde-format
msgid "When renaming a file, the whole text is selected. If you want Total-Commander like renaming of just the name, without extension, uncheck this option."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:110
#, kde-format
msgid "Unselect files before copy/move"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:110
#, kde-format
msgid "Unselect files, which are to be copied/moved, before the operation starts."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:111
#, kde-format
msgid "Filter dialog remembers settings"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:111
#, kde-format
msgid "The filter dialog is opened with the last filter settings that where applied to the panel."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:121
#, kde-format
msgid "Tabs"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:125
#, kde-format
msgid "Use full path tab names"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:125
#, kde-format
msgid "Display the full path in the folder tabs. By default only the last part of the path is displayed."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:126
#, kde-format
msgid "Show new/close tab buttons"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:126
#, kde-format
msgid "Show the new/close tab buttons."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:134
#, kde-format
msgid "Tab Bar position:"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:137
#, kde-format
msgid "Top"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:138
#, kde-format
msgid "Bottom"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:149
#, kde-format
msgid "Show Tab Bar on single tab"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:150
#, kde-format
msgid "Show the tab bar with only one tab."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:158
#, kde-format
msgid "Search bar"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:162
#, kde-format
msgid "Start by typing"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:162
#, kde-format
msgid "Open search bar and start searching by typing in panel."
msgid "Bookmark search is also applied to special items in bookmark menu like Trash, Popular URLs, Jump Back, etc."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:218
#, kde-format
msgid "Status/Totalsbar"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:223
#, kde-format
msgid "Show size in bytes too"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:224
#, kde-format
msgid "Show space information"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:224
#, kde-format
msgid "Show free/total space on the device"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:243
#, kde-format
msgid "Layout"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:252
#, kde-format
msgid "Layout:"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:265
#, kde-format
msgid "Frame Color:"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:269
#, kde-format
msgctxt "Frame color"
msgid "Defined by Layout"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:270
#, kde-format
msgctxt "Frame color"
msgid "None"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:271
#, kde-format
msgctxt "Frame color"
msgid "Statusbar"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:278
#, kde-format
msgid "Frame Shape:"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:282
#, kde-format
msgctxt "Frame shape"
msgid "Defined by Layout"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:283
#, kde-format
msgctxt "Frame shape"
msgid "None"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:284
#, kde-format
msgctxt "Frame shape"
msgid "Box"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:285
#, kde-format
msgctxt "Frame shape"
msgid "Panel"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:292
#, kde-format
msgid "Frame Shadow:"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:296
#, kde-format
msgctxt "Frame shadow"
msgid "Defined by Layout"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:297
#, kde-format
msgctxt "Frame shadow"
msgid "None"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:298
#, kde-format
msgctxt "Frame shadow"
msgid "Raised"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:299
#, kde-format
msgctxt "Frame shadow"
msgid "Sunken"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:313
#, kde-format
msgid "Default icon size:"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:331
#, kde-format
msgid "Use icons in the filenames"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:331
#, kde-format
msgid "Show the icons for filenames and folders."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:332
#, kde-format
msgid "Show previews by default"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:332
#, kde-format
msgid "Show previews of files and folders."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:367
#, kde-format
msgid "View font:"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:376
#, kde-format
msgid "Tooltip delay (msec):"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:377
#, kde-format
msgid "The duration after a tooltip is shown for a file item, in milliseconds. Set a negative value to disable tooltips."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:394
#, kde-format
msgid "Use human-readable file size"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:394
#, kde-format
msgid "File sizes are displayed in B, KB, MB and GB, not just in bytes."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:395
#, kde-format
msgid "Show hidden files"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:395
#, kde-format
msgid "Display files beginning with a dot."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:396
#, kde-format
msgid "Numeric Permissions"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:396
#, kde-format
msgid "Show octal numbers (0755) instead of the standard permissions (rwxr-xr-x) in the permission column."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:397
#, kde-format
msgid "Load the user defined folder icons"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:397
#, kde-format
msgid "Load the user defined folder icons (can cause decrease in performance)."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:398
#, kde-format
msgid "Always show current item"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:398
#, kde-format
msgid "Show current item border decoration in inactive panel."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:412
#, kde-format
msgid "Sort method:"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:414
#, kde-format
msgid "Alphabetical"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:415
#, kde-format
msgid "Alphabetical and numbers"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:416
#, kde-format
msgid "Character code"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:417
#, kde-format
msgid "Character code and numbers"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:418
#, kde-format
msgctxt "Krusader sort"
msgid "Krusader"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:431
#, kde-format
msgid "Case sensitive sorting"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:432
#, kde-format
msgid "All files beginning with capital letters appear before files beginning with non-capital letters (UNIX default)."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:433
#, kde-format
msgid "Show folders first"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:434
#, kde-format
msgid "Always sort dirs by name"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:435
#, kde-format
msgid "Folders are sorted by name, regardless of the sort column."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:436
#, kde-format
msgid "Locale aware sorting"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:437
#, kde-format
msgid "The sorting is performed in a locale- and also platform-dependent manner. Can be slow."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:451
#, kde-format
msgid "View modes"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:458
#, kde-format
msgid "Default view mode:"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:504
#, kde-format
msgid "Buttons"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:513
#, kde-format
msgid "Toolbar buttons have icons"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:514
#, kde-format
msgid "Show Media Button"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:514
#, kde-format
msgid "The media button will be visible."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:515
#, kde-format
msgid "Show Back Button"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:516
#, kde-format
msgid "Show Forward Button"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:517
#, kde-format
msgid "Show History Button"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:517
#, kde-format
msgid "The history button will be visible."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:518
#, kde-format
msgid "Show Bookmarks Button"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:518
#, kde-format
msgid "The bookmarks button will be visible."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:519
#, kde-format
msgid "Show Panel Toolbar"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:519
#, kde-format
msgid "The panel toolbar will be visible."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:525
#, kde-format
msgid "Visible Panel Toolbar buttons"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:529
#, kde-format
msgid "Equal button (=)"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:529
#, kde-format
msgid "Changes the panel folder to the other panel folder."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:530
#, kde-format
msgid "Up button (..)"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:530
#, kde-format
msgid "Changes the panel folder to the parent folder."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:531
#, kde-format
msgid "Home button (~)"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:531
#, kde-format
msgid "Changes the panel folder to the home folder."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:532
#, kde-format
msgid "Root button (/)"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:532
#, kde-format
msgid "Changes the panel folder to the root folder."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:533
#, kde-format
msgid "Toggle-button for sync-browsing"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:533
#, kde-format
msgid "Each folder change in the panel is also performed in the other panel."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:555
#, kde-format
msgid "Selection Mode"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:568
#, kde-format
msgid "Krusader Mode"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:568
#, kde-format
msgid "Both keys allow selecting files. To select more than one file, hold the Ctrl key and click the left mouse button. Right-click menu is invoked using a short click on the right mouse button."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:569
#, kde-format
msgid "Konqueror Mode"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:569
#, kde-format
msgid "Pressing the left mouse button selects files - you can click and select multiple files. Right-click menu is invoked using a short click on the right mouse button."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:570
#, kde-format
msgid "Total-Commander Mode"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:570
#, kde-format
msgid "The left mouse button does not select, but sets the current file without affecting the current selection. The right mouse button selects multiple files and the right-click menu is invoked by pressing and holding the right mouse button."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:571
#, kde-format
msgid "Ergonomic Mode"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:571
#, kde-format
msgid "The left mouse button does not select, but sets the current file without affecting the current selection. The right mouse button invokes the context-menu. You can select with Ctrl key and the left button."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:572
#, kde-format
msgid "Custom Selection Mode"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:572
#, kde-format
msgid "Design your own selection mode."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:584
#, kde-format
msgid "Details"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:591
#, kde-format
msgid "Double-click selects (classic)"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:591
#, kde-format
msgid "A single click on a file will select and focus, a double click opens the file or steps into the folder."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:592
#, kde-format
msgid "Obey global selection policy"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:592
#, kde-format
msgid ""
"<p>Use global setting:</p>"
"<p><i>Plasma System Settings -> Input Devices -> Mouse</i></p>"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:603
#, kde-format
msgid "Based on KDE's selection mode"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:604
#, kde-format
msgid "If checked, use a mode based on KDE's style."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:606
#, kde-format
msgid "Left mouse button selects"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:607
#, kde-format
msgid "If checked, left clicking an item will select it."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:609
#, kde-format
msgid "Left mouse button preserves selection"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:610
#, kde-format
msgid "If checked, left clicking an item will select it, but will not unselect other, already selected items."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:612
#, kde-format
msgid "Shift/Ctrl-Left mouse button selects"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:613
#, kde-format
msgid ""
"If checked, Shift/Ctrl left clicking will select items.\n"
"Note: this is meaningless if 'Left Button Selects' is checked."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:615
#, kde-format
msgid "Right mouse button selects"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:616
#, kde-format
msgid "If checked, right clicking an item will select it."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:618
#, kde-format
msgid "Right mouse button preserves selection"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:619
#, kde-format
msgid "If checked, right clicking an item will select it, but will not unselect other, already selected items."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:621
#, kde-format
msgid "Shift/Ctrl-Right mouse button selects"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:622
#, kde-format
msgid ""
"If checked, Shift/Ctrl right clicking will select items.\n"
"Note: this is meaningless if 'Right Button Selects' is checked."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:624
#, kde-format
msgid "Spacebar moves down"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:625
#, kde-format
msgid ""
"If checked, pressing the spacebar will select the current item and move down.\n"
"Otherwise, current item is selected, but remains the current item."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:627
#, kde-format
msgid "Spacebar calculates disk space"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:628
#, kde-format
msgid ""
"If checked, pressing the spacebar while the current item is a folder, will (except from selecting the folder)\n"
"calculate space occupied of the folder (recursively)."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:630
#, kde-format
msgid "Insert moves down"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:631
#, kde-format
msgid ""
"If checked, pressing Insert will select the current item, and move down to the next item.\n"
"Otherwise, current item is not changed."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:633
#, kde-format
msgid "Right clicking pops context menu immediately"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:634
#, kde-format
msgid ""
"If checked, right clicking will result in an immediate showing of the context menu.\n"
"Otherwise, user needs to click and hold the right mouse button for 500ms."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:670
#, kde-format
msgid "Media Menu"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:679
#, kde-format
msgid "Show Mount Path"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:680
#, kde-format
msgid "Show File System Type"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:689
#, kde-format
msgid "Show Size:"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:691
#, kde-format
msgctxt "setting 'show size'"
msgid "Always"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:692
#, kde-format
msgctxt "setting 'show size'"
msgid "When Device has no Label"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgpanel.cpp:693
#, kde-format
msgctxt "setting 'show size'"
msgid "Never"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgprotocols.cpp:47
#, kde-format
msgid "Links"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgprotocols.cpp:51
#, kde-format
msgid "Defined Links"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgprotocols.cpp:68
#, kde-format
msgid "Add protocol to the link list."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgprotocols.cpp:73
#, kde-format
msgid "Remove protocol from the link list."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgprotocols.cpp:85
#, kde-format
msgid "Add MIME to the selected protocol on the link list."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgprotocols.cpp:90
#, kde-format
msgid "Remove MIME from the link list."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgprotocols.cpp:98
#: krusader/Konfigurator/konfigurator.cpp:146
#, kde-format
msgid "Protocols"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgprotocols.cpp:109
#, kde-format
msgid "MIMEs"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgstartup.cpp:46
#, kde-format
msgid ""
"Defines the panel profile used at startup. A panel profile contains:"
"<ul>"
"<li>all the tabs paths</li>"
"<li>the current tab</li>"
"<li>the active panel</li>"
"</ul>"
"<b><Last session></b> is a special panel profile which is saved automatically when Krusader is closed."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgstartup.cpp:47
#, kde-format
msgid "Startup profile:"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgstartup.cpp:52
#, kde-format
msgid "<Last session>"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgstartup.cpp:70
#, kde-format
msgid "Show splashscreen"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgstartup.cpp:70
#, kde-format
msgid "Display a splashscreen when starting Krusader."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgstartup.cpp:71
#, kde-format
msgid "Single instance mode"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgstartup.cpp:71
#, kde-format
msgid "Only one Krusader instance is allowed to run."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgstartup.cpp:78
#, kde-format
msgid "Fallback Icon Theme:"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgstartup.cpp:79
#, kde-format
msgid "Whenever icon is not found in system icon theme, this theme will be used as a fallback. If fallback theme doesn't contain the icon, Breeze or Oxygen will be used if any of these are present."
msgid "Save last position, size and panel settings"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgstartup.cpp:100
#, kde-format
msgid ""
"<p>At startup, the main window will resize itself to the size it was when last shutdown. It will also appear in the same location of the screen, having panels sorted and aligned as they were before.</p>"
" "
"<p>If this option is disabled, you can use the menu <i>Window -> Save Position</i> option to manually set the main window's size and position at startup.</p>"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgstartup.cpp:104
#, kde-format
msgid "Update default panel settings"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgstartup.cpp:105
#, kde-format
msgid "When settings of a panel are changed, save them as the default for new panels of the same type."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgstartup.cpp:106
#, kde-format
msgid "Start to tray"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgstartup.cpp:107
#, kde-format
msgid "Krusader starts to tray, without showing the main window"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgstartup.cpp:114
#, kde-format
msgid "Save component settings on exit"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgstartup.cpp:115
#, kde-format
msgid "Check the state of the user interface components and restore them to their condition when last shutdown."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgstartup.cpp:116
#, kde-format
msgid "Show function keys"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgstartup.cpp:116
#, kde-format
msgid "Function keys will be visible after startup."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgstartup.cpp:117
#, kde-format
msgid "Show command line"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgstartup.cpp:117
#, kde-format
msgid "Command line will be visible after startup."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgstartup.cpp:118
#, kde-format
msgid "Show embedded terminal"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kgstartup.cpp:119
#, kde-format
msgid "Embedded terminal will be visible after startup."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kguseractions.cpp:41
#, kde-format
msgid "Information"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kguseractions.cpp:46
#, kde-format
msgid ""
"Here you can configure settings about useractions.\n"
"To set up, configure and manage your useractions please use ActionMan."
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kguseractions.cpp:50
#, kde-format
msgid "Start ActionMan"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kguseractions.cpp:57
#, kde-format
msgid "Terminal execution"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kguseractions.cpp:61
#, kde-format
msgid "Terminal for UserActions:"
msgstr ""
#. +> trunk5
#: krusader/Konfigurator/kguseractions.cpp:67
#, kde-format
msgid ""
"%t will be replaced by the title of the action,\n"
msgid "Statusbar will show basic information about file below mouse pointer."
msgstr ""
#. +> trunk5
#: krusader/krusader.cpp:327
#, kde-format
msgid ""
"<qt><b>Welcome to Krusader.</b>"
"<p>As this is your first run, your machine will now be checked for external applications. Then the Konfigurator will be launched where you can customize Krusader to your needs.</p>"
msgctxt "%1=number of selected items,%2=total number of items, %3=filesize of selected items,%4=filesize in Bytes, %5=filesize of all items in folder,%6=filesize in Bytes"
msgid "%1 out of %2, %3 (%4) out of %5 (%6)"
msgstr ""
#. +> trunk5
#: krusader/Panel/PanelView/krview.cpp:434
#, kde-format
msgctxt "%1=number of selected items,%2=total number of items, %3=filesize of selected items,%4=filesize of all items in folder"
msgid "%1 out of %2, %3 out of %4"
msgstr ""
#. +> trunk5
#: krusader/Panel/PanelView/krview.cpp:1085
#, kde-format
msgid "Filter Files"
msgstr ""
#. +> trunk5
#: krusader/Panel/PanelView/krview.cpp:1085
#: krusader/Panel/PanelView/krview.cpp:1086
#: krusader/Panel/PanelView/krview.cpp:1095
#, kde-format
msgid "Apply filter to folders"
msgstr ""
#. +> trunk5
#: krusader/Panel/PanelView/krview.cpp:1111
#, kde-format
msgid "Select Files"
msgstr ""
#. +> trunk5
#: krusader/Panel/PanelView/krview.cpp:1111
#: krusader/Panel/PanelView/krview.cpp:1112
#: krusader/Panel/PanelView/krview.cpp:1118
#, kde-format
msgid "Apply selection to folders"
msgstr ""
#. +> trunk5
#: krusader/Panel/PanelView/krviewfactory.cpp:67
#, kde-format
msgid "&Detailed View"
msgstr ""
#. +> trunk5
#: krusader/Panel/PanelView/krviewfactory.cpp:70
#, kde-format
msgid "&Brief View"
msgstr ""
#. +> trunk5
#: krusader/Panel/PanelView/krviewitem.cpp:77
#, kde-format
msgid "Climb up the folder tree"
msgstr ""
#. +> trunk5
#: krusader/Panel/PanelView/krviewitem.cpp:90
#, kde-format
msgid "(Broken Link)"
msgstr ""
#. +> trunk5
#: krusader/Panel/PanelView/krviewitem.cpp:92
#, kde-format
msgid "Symbolic Link"
msgstr ""
#. +> trunk5
#: krusader/Panel/PanelView/krviewitem.cpp:94
#, kde-format
msgid "%1 (Link)"
msgstr ""
#. +> trunk5
#: krusader/Panel/PanelView/listmodel.cpp:144
#: krusader/Synchronizer/synchronizergui.cpp:1625
#, kde-format
msgctxt "Show the string 'DIR' instead of file size in detailed view (for folders)"
msgid "DIR"
msgstr ""
#. +> trunk5
#: krusader/Panel/PanelView/listmodel.cpp:396
#, kde-format
msgctxt "File property"
msgid "Name"
msgstr ""
#. +> trunk5
#: krusader/Panel/PanelView/listmodel.cpp:397
#, kde-format
msgctxt "File property"
msgid "Ext"
msgstr ""
#. +> trunk5
#: krusader/Panel/PanelView/listmodel.cpp:398
#, kde-format
msgctxt "File property"
msgid "Size"
msgstr ""
#. +> trunk5
#: krusader/Panel/PanelView/listmodel.cpp:399
#, kde-format
msgctxt "File property"
msgid "Type"
msgstr ""
#. +> trunk5
#: krusader/Panel/PanelView/listmodel.cpp:400
#, kde-format
msgctxt "File property"
msgid "Modified"
msgstr ""
#. +> trunk5
#: krusader/Panel/PanelView/listmodel.cpp:401
#, kde-format
msgctxt "File property"
msgid "Changed"
msgstr ""
#. +> trunk5
#: krusader/Panel/PanelView/listmodel.cpp:402
#, kde-format
msgctxt "File property"
msgid "Accessed"
msgstr ""
#. +> trunk5
#: krusader/Panel/PanelView/listmodel.cpp:403
#, kde-format
msgctxt "File property"
msgid "Perms"
msgstr ""
#. +> trunk5
#: krusader/Panel/PanelView/listmodel.cpp:404
#, kde-format
msgctxt "File property"
msgid "rwx"
msgstr ""
#. +> trunk5
#: krusader/Panel/PanelView/listmodel.cpp:405
#, kde-format
msgctxt "File property"
msgid "Owner"
msgstr ""
#. +> trunk5
#: krusader/Panel/PanelView/listmodel.cpp:406
#, kde-format
msgctxt "File property"
msgid "Group"
msgstr ""
#. +> trunk5
#: krusader/Panel/PanelView/listmodel.cpp:509
#, kde-format
msgid "Size: %1"
msgstr ""
#. +> trunk5
#: krusader/Panel/PanelView/listmodel.cpp:511
#, kde-format
msgctxt "File property"
msgid "Type: %1"
msgstr ""
#. +> trunk5
#: krusader/Panel/PanelView/listmodel.cpp:512
#, kde-format
msgctxt "File property"
msgid "Modified: %1"
msgstr ""
#. +> trunk5
#: krusader/Panel/PanelView/listmodel.cpp:513
#, kde-format
msgctxt "File property"
msgid "Changed: %1"
msgstr ""
#. +> trunk5
#: krusader/Panel/PanelView/listmodel.cpp:514
#, kde-format
msgctxt "File property"
msgid "Last Access: %1"
msgstr ""
#. +> trunk5
#: krusader/Panel/PanelView/listmodel.cpp:515
#, kde-format
msgctxt "File property"
msgid "Permissions: %1"
msgstr ""
#. +> trunk5
#: krusader/Panel/PanelView/listmodel.cpp:517
#, kde-format
msgctxt "File property"
msgid "Owner: %1"
msgstr ""
#. +> trunk5
#: krusader/Panel/PanelView/listmodel.cpp:518
#, kde-format
msgctxt "File property"
msgid "Group: %1"
msgstr ""
#. +> trunk5
#: krusader/Panel/PanelView/listmodel.cpp:522
#, kde-format
msgctxt "File property; broken symbolic link"
msgid "Link to: %1 - (broken)"
msgstr ""
#. +> trunk5
#: krusader/Panel/PanelView/listmodel.cpp:524
#, kde-format
msgctxt "File property"
msgid "Link to: %1"
msgstr ""
#. +> trunk5
#: krusader/Panel/sidebar.cpp:68
#, kde-format
msgid "Tree Panel: a tree view of the local file system"
msgstr ""
#. +> trunk5
#: krusader/Panel/sidebar.cpp:75
#, kde-format
msgid "Preview Panel: display a preview of the current file"
msgstr ""
#. +> trunk5
#: krusader/Panel/sidebar.cpp:82
#, kde-format
msgid "View Panel: view the current file"
msgstr ""
#. +> trunk5
#: krusader/Panel/sidebar.cpp:89
#, kde-format
msgid "Disk Usage Panel: view the usage of a folder"
msgid "The left base folder used during the synchronization process."
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:236
#, kde-format
msgid "The right base folder used during the synchronization process."
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:250
#, kde-format
msgid "Recurse subfolders"
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:253
#, kde-format
msgid "Compare not only the base folders but their subfolders as well."
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:254
#, kde-format
msgid "Follow symlinks"
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:258
#, kde-format
msgid "Follow symbolic links during the compare process."
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:259
#, kde-format
msgid "Compare by content"
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:262
#, kde-format
msgid "Compare duplicated files with same size by content."
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:263
#, kde-format
msgid "Ignore Date"
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:266
#, kde-format
msgid ""
"<p>Ignore date information during the compare process.</p>"
"<p><b>Note</b>: useful if the files are located on network filesystems or in archives.</p>"
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:267
#, kde-format
msgid "Asymmetric"
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:270
#, kde-format
msgid ""
"<p><b>Asymmetric mode</b></p>"
"<p>The left side is the destination, the right is the source folder. Files existing only in the left folder will be deleted, the other differing ones will be copied from right to left.</p>"
"<p><b>Note</b>: useful when updating a folder from a file server.</p>"
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:271
#, kde-format
msgid "Ignore Case"
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:274
#, kde-format
msgid ""
"<p>Case insensitive filename compare.</p>"
"<p><b>Note</b>: useful when synchronizing Windows filesystems.</p>"
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:281
#, kde-format
msgid "S&how options"
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:292
#, kde-format
msgid "Show files marked to <i>Copy from left to right</i>."
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:298
#, kde-format
msgid "Show files considered to be identical."
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:304
#, kde-format
msgid "Show excluded files."
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:310
#, kde-format
msgid "Show files marked to <i>Copy from right to left</i>."
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:316
#, kde-format
msgid "Show files marked to delete."
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:322
#, kde-format
msgid "Show files that exist on both sides."
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:324
#, kde-format
msgid "Duplicates"
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:328
#, kde-format
msgid "Show files that exist on one side only."
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:330
#, kde-format
msgid "Singles"
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:339
#, kde-format
msgid "The compare results of the synchronizer (Ctrl+M)."
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:350
#: krusader/Synchronizer/synchronizergui.cpp:356
#, kde-format
msgctxt "@title:column file name"
msgid "Name"
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:351
#: krusader/Synchronizer/synchronizergui.cpp:355
#, kde-format
msgctxt "@title:column"
msgid "Size"
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:352
#: krusader/Synchronizer/synchronizergui.cpp:354
#, kde-format
msgctxt "@title:column"
msgid "Date"
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:353
#, kde-format
msgid "<=>"
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:393
#, kde-format
msgid "&Synchronizer"
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:404
#, kde-format
msgid "&Options"
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:411
#, kde-format
msgid "Parallel threads:"
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:421
#, kde-format
msgid "Equality threshold:"
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:429
#: krusader/Synchronizer/synchronizergui.cpp:444
#, kde-format
msgid "sec"
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:430
#: krusader/Synchronizer/synchronizergui.cpp:445
#, kde-format
msgid "min"
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:431
#: krusader/Synchronizer/synchronizergui.cpp:446
#, kde-format
msgid "hour"
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:432
#: krusader/Synchronizer/synchronizergui.cpp:447
#, kde-format
msgid "day"
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:435
#, kde-format
msgid "Time shift (right-left):"
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:454
#, kde-format
msgid "Ignore hidden files"
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:468
#, kde-format
msgid "Profile manager (Ctrl+P)."
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:474
#, kde-format
msgid "Swap sides (Ctrl+S)."
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:484
#, kde-format
msgid "Compare"
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:494
#: krusader/Synchronizer/synchronizergui.cpp:1523
#, kde-format
msgid "Quiet"
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:496
#: krusader/Synchronizer/synchronizergui.cpp:1525
#, kde-format
msgid "Scroll Results"
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:513
#, kde-format
msgid "Synchronize"
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:645
#, kde-format
msgid "Selected files from targ&et folder:"
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:646
#, kde-format
msgid "Selected files from sou&rce folder:"
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:648
#, kde-format
msgid "Selected files from &left folder:"
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:649
#, kde-format
msgid "Selected files from &right folder:"
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:651
#, kde-format
msgid "Targ&et folder:"
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:652
#, kde-format
msgid "Sou&rce folder:"
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:654
#, kde-format
msgid "&Left folder:"
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:655
#, kde-format
msgid "&Right folder:"
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:688
#, kde-format
msgid "URL must be the descendant of either the left or the right base URL."
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:746
#, kde-format
msgid "Synchronize Folders"
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:748
#, kde-format
msgid "E&xclude"
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:750
#, kde-format
msgid "Restore ori&ginal operation"
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:752
#, kde-format
msgid "Re&verse direction"
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:754
#, kde-format
msgid "Copy from &right to left"
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:756
#, kde-format
msgid "Copy from &left to right"
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:758
#, kde-format
msgid "&Delete (left single)"
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:763
#, kde-format
msgid "V&iew left file"
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:766
#, kde-format
msgid "Vi&ew right file"
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:769
#, kde-format
msgid "&Compare Files"
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:775
#, kde-format
msgid "C&opy selected to clipboard (left)"
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:777
#, kde-format
msgid "Co&py selected to clipboard (right)"
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:782
#, kde-format
msgid "&Select items"
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:784
#, kde-format
msgid "Deselec&t items"
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:786
#, kde-format
msgid "I&nvert selection"
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:796
#, kde-format
msgid "Synchronize with &KGet"
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:871
#, kde-format
msgid "Select items"
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:872
#, kde-format
msgid "Deselect items"
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:996
#, kde-format
msgid "The target folder must not be empty."
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:1001
#, kde-format
msgid "The source folder must not be empty."
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:1241
#, kde-format
msgid "Synchronizer has nothing to do."
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizergui.cpp:1349
#, kde-format
msgid "The synchronizer window contains data from a previous compare. If you exit, this data will be lost. Do you really want to exit?"
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizertask.cpp:137
#: krusader/Synchronizer/synchronizertask.cpp:144
#, kde-format
msgid "Error at opening %1."
msgstr ""
#. +> trunk5
#: krusader/Synchronizer/synchronizertask.cpp:305
#, kde-format
msgid "I/O error while comparing file %1 with %2."
msgid "Mycroft by default is powered by a cloud-based speech to text service. Mycroft gives you the ability to change speech to text services or use a locally configured one within their settings at home.mycroft.ai. If you agree to the default usage of Mycroft’s speech to text service, please continue. Also remember you can always choose to turn off or mute Mycroft when you do not wish to use it."
msgstr ""
#. +> trunk5
#: contents/ui/Disclaimer.qml:83
#, kde-format
msgid "To start using Mycroft toggle the switch in the upper right corner!"
msgstr ""
#. +> trunk5
#: contents/ui/DisclaimerCardDelegate.qml:146
#, kde-format
msgid "Mycroft by default is powered by a cloud-based speech to text service. Mycroft gives you the ability to change speech to text services or use a locally configured one within their settings at home.mycroft.ai."
"<p>This option allows the user to specify a custom command to be executed by GPG when decryption occurs. (This is recommended for advanced users only).</p>"
"<p>Checking this option outputs all encrypted files in a format that can be opened by a text editor and as such the output is suitable for placing in the body of an e-mail message.</p>"
"<qt><b>Use *.pgp extension for encrypted files:</b><br />"
"\n"
"<p>Checking this option will append a .pgp extension to all encrypted files instead of a .gpg extension. This option will maintain compatibility with users of PGP (Pretty Good Privacy) software.</p>"
"<p>When activated, an entry field will be shown in the key selection dialog, enabling you to enter a custom command for encryption. This option is recommended for experienced users only.</p>"
"<p>This ensures all files/messages will also be encrypted with the chosen key. However, if the \"Encrypt files with:\" option is selected that chosen key will override the \"Always encrypt with:\" selection.</p>"
"<p>Checking this option and selecting a key will force any file encryption operation to use the selected key. KGpg will not query for a recipient and the default key will be bypassed.</p>"
"<qt><b>Allow encryption with untrusted keys:</b><br />"
"\n"
"<p>When importing a public key, the key is usually marked as untrusted and as such cannot be used unless it is signed by the default key (thus making it 'trusted'). Checking this box enables any key to be used even if it is untrusted.</p>"
"<qt><b>Allow untrusted keys as members of key groups:</b><br />"
"<p>A key group allows simple encryption to multiple recipients at once. Similar to the <em>Allow encryption with untrusted keys</em> option this allows untrusted keys to become member of a key group.</p>"
"<p>Checking this option will remove the keyid of the recipient from all encrypted packets. The advantage: traffic analysis of the encrypted packets cannot be performed as easily because the recipient is unknown. The disadvantage: the receiver of the encrypted packets is forced to try all secret keys before being able to decrypt the packets. This can be a lengthy process depending on the number of secret keys the receiver holds.</p>"
"<p>Checking this option forces GnuPG to output encrypted packets that are as compliant with PGP (Pretty Good Privacy) 6 standards as possible thus allowing GnuPG users to inter operate with PGP 6 users.</p>"
"<p>This is the name of the configuration file in the directory specified above. The default is <em>gnupg.conf</em> while older versions of GnuPG used <em>options</em>.</p>"
"<p>The GnuPG agent stores the passwords for your secret keys in memory for a limited amount of time. If you use your secret key again while it is cached you do not have to enter it again. This is less secure than typing it every time.</p>"
"<qt><b>Use mouse selection instead of clipboard:</b><br />"
"\n"
"<p>If checked, clipboard operations in KGpg will use the selection clipboard, that means highlighting a text to copy, and middle button (or right+left together) to paste. If this option is not checked, the clipboard will work with Key shortcuts (Ctrl-c, Ctrl-v).</p>"
msgid "Here you can define how User Ids that do not contain an email address (like Photo Ids) are sent to the key owner. You can choose to either send them with every other User Id you signed, only with the first Id you signed or to not send them at all."
"<p>A Key Server is a centralized repository of PGP/GnuPG keys connected to the Internet which can be conveniently accessed in order to obtain or deposit keys. Select from the drop down list to specify which key server should be used.</p>"
" "
"<p>Often these keys are held by people whom the user has never met and as such the authenticity is dubious at best. Refer to the GnuPG manual covering \"Web-of-Trust\" relationships to find out how GnuPG works around the problem of verifying authenticity.</p>"
"<qt><b>Text to search or ID of the key to import:</b><br />"
"\n"
"<p>There are multiple ways to search for a key, you can use a text or partial text search (example: entering Phil or Zimmerman will bring up all keys in which Phil or Zimmerman shows up) or you can search by the ID's of the key. Key ID's are strings of letters and numbers that uniquely identify a key (example: searching for 0xED7585F4 would bring up the key associated with that ID).</p>"
msgid "gpg process did not finish. Cannot generate a new key pair."
msgstr ""
#. +> trunk5 stable5
#: keysmanager.cpp:754
#, kde-format
msgid "You can only refresh primary keys. Please check your selection."
msgstr ""
#. +> trunk5 stable5
#: keysmanager.cpp:878
#, kde-format
msgid ""
"Another operation is still in progress.\n"
"Please wait a moment until this operation is complete."
msgstr ""
#. +> trunk5 stable5
#: keysmanager.cpp:879 keysmanager.cpp:884
#, kde-format
msgid "Add New User Id"
msgstr ""
#. +> trunk5 stable5
#: keysmanager.cpp:924
#, kde-format
msgid "The image must be a JPEG file. Remember that the image is stored within your public key, so if you use a very large picture, your key will become very large as well. The size should not exceed 6 KiB. An image size of around 240x288 is a good size to use."
msgstr ""
#. +> trunk5 stable5
#: keysmanager.cpp:956
#, kde-format
msgid ""
"<qt>Are you sure you want to delete Photo id <b>%1</b><br/>"
"<qt>A viewer for JPEG images is not specified.<br/>"
"Please check your installation.</qt>"
msgstr ""
#. +> trunk5 stable5
#: keysmanager.cpp:1568
#, kde-format
msgid "Show photo"
msgstr ""
#. +> trunk5 stable5
#: keysmanager.cpp:1665
#, kde-format
msgid ""
"<p>This key is an orphaned secret key (secret key without public key.) It is currently not usable.</p>"
"<p>Would you like to regenerate the public key?</p>"
msgstr ""
#. +> trunk5 stable5
#: keysmanager.cpp:1667
#, kde-format
msgid "Generate"
msgstr ""
#. +> trunk5 stable5
#: keysmanager.cpp:1667
#, kde-format
msgid "Do Not Generate"
msgstr ""
#. +> trunk5 stable5
#: keysmanager.cpp:1697
#, kde-format
msgid "<qt>Are you sure you want to delete group <b>%1</b> ?</qt>"
msgstr ""
#. +> trunk5 stable5
#: keysmanager.cpp:1698 keysmanager.cpp:2373
#, kde-format
msgid "Delete"
msgstr ""
#. +> trunk5 stable5
#: keysmanager.cpp:1728
#, kde-format
msgid "<qt>You cannot create a group containing signatures, subkeys or other groups.</qt>"
msgstr ""
#. +> trunk5 stable5
#: keysmanager.cpp:1743 kgpgrevokewidget.cpp:61
#, kde-format
msgctxt "<Name> (<Email>) ID: <KeyId>"
msgid "%1 (%2) ID: %3"
msgstr ""
#. +> trunk5 stable5
#: keysmanager.cpp:1748
#, kde-format
msgid "Create New Group"
msgstr ""
#. +> trunk5 stable5
#: keysmanager.cpp:1749
#, kde-format
msgctxt "Enter the name of the group you are creating now"
msgid "Enter new group name:"
msgstr ""
#. +> trunk5 stable5
#: keysmanager.cpp:1754
#, kde-format
msgid "Following keys are not valid or not trusted and will not be added to the group:"
msgstr ""
#. +> trunk5 stable5
#: keysmanager.cpp:1760
#, kde-format
msgid "<qt>No valid or trusted key was selected. The group <b>%1</b> will not be created.</qt>"
msgstr ""
#. +> trunk5 stable5
#: keysmanager.cpp:1772
#, kde-format
msgid "Group Properties"
msgstr ""
#. +> trunk5 stable5
#: keysmanager.cpp:1808
#, kde-format
msgid "You can only sign primary keys. Please check your selection."
msgstr ""
#. +> trunk5 stable5
#: keysmanager.cpp:1817
#, kde-format
msgid ""
"<qt>You are about to sign key:<br />"
"<br />"
"%1<br />"
"ID: %2<br />"
"Fingerprint: <br />"
"<b>%3</b>.<br />"
"<br />"
"You should check the key fingerprint by phoning or meeting the key owner to be sure that someone is not trying to intercept your communications.</qt>"
msgstr ""
#. +> trunk5 stable5
#: keysmanager.cpp:1822
#, kde-format
msgid ""
"<qt>You are about to sign key:<br />"
"<br />"
"%1 (%2)<br />"
"ID: %3<br />"
"Fingerprint: <br />"
"<b>%4</b>.<br />"
"<br />"
"You should check the key fingerprint by phoning or meeting the key owner to be sure that someone is not trying to intercept your communications.</qt>"
"<qt>You are about to sign the following keys in one pass.<br/>"
"<b>If you have not carefully checked all fingerprints, the security of your communications may be compromised.</b></qt>"
msgstr ""
#. +> trunk5 stable5
#: keysmanager.cpp:1887 keysmanager.cpp:2036
#, kde-format
msgid "You can only sign user ids and photo ids. Please check your selection."
msgstr ""
#. +> trunk5 stable5
#: keysmanager.cpp:1901
#, kde-format
msgid ""
"<qt>You are about to sign user id:<br />"
"<br />"
"%1<br />"
"ID: %2<br />"
"Fingerprint: <br />"
"<b>%3</b>.<br />"
"<br />"
"You should check the key fingerprint by phoning or meeting the key owner to be sure that someone is not trying to intercept your communications.</qt>"
msgstr ""
#. +> trunk5 stable5
#: keysmanager.cpp:1905
#, kde-format
msgid ""
"<qt>You are about to sign user id:<br />"
"<br />"
"%1 (%2)<br />"
"ID: %3<br />"
"Fingerprint: <br />"
"<b>%4</b>.<br />"
"<br />"
"You should check the key fingerprint by phoning or meeting the key owner to be sure that someone is not trying to intercept your communications.</qt>"
msgstr ""
#. +> trunk5 stable5
#: keysmanager.cpp:1931
#, kde-format
msgid ""
"<qt>You are about to sign the following user ids in one pass.<br/>"
"<b>If you have not carefully checked all fingerprints, the security of your communications may be compromised.</b></qt>"
msgstr ""
#. +> trunk5 stable5
#: keysmanager.cpp:2002
#, kde-format
msgid "<qt>Bad passphrase, key <b>%1 (%2)</b> not signed.</qt>"
msgstr ""
#. +> trunk5 stable5
#: keysmanager.cpp:2006
#, kde-format
msgid "<qt>The key <b>%1 (%2)</b> is already signed.</qt>"
msgstr ""
#. +> trunk5 stable5
#: keysmanager.cpp:2011
#, kde-format
msgid ""
"<qt>Signing key <b>%1</b> with key <b>%2</b> failed.<br />"
"Do you want to try signing the key in console mode?</qt>"
msgstr ""
#. +> trunk5 stable5
#: keysmanager.cpp:2129
#, kde-format
msgid "All signatures for this key are already in your keyring"
msgid_plural "All signatures for this keys are already in your keyring"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: keysmanager.cpp:2219
#, kde-format
msgid "Edit key manually to delete a self-signature."
msgstr ""
#. +> trunk5 stable5
#: keysmanager.cpp:2223
#, kde-format
msgid ""
"<qt>Are you sure you want to delete signature<br />"
"<b>%1</b><br />"
"from user id <b>%2</b><br />"
"of key: <b>%3</b>?</qt>"
msgstr ""
#. +> trunk5 stable5
#: keysmanager.cpp:2245
#, kde-format
msgid "Requested operation was unsuccessful, please edit the key manually."
msgstr ""
#. +> trunk5 stable5
#: keysmanager.cpp:2329
#, kde-format
msgid "<qt>The key you are deleting is a member of the following key group. Do you want to remove it from this group?</qt>"
msgid_plural "<qt>The key you are deleting is a member of the following key groups. Do you want to remove it from these groups?</qt>"
"Please select only one folder, or several files, but do not mix files and folders."
msgstr ""
#. +> trunk5 stable5
#: kgpg.cpp:198
#, kde-format
msgid "Encrypt file"
msgstr ""
#. +> trunk5 stable5
#: kgpg.cpp:199
#, kde-format
msgid "Open key manager"
msgstr ""
#. +> trunk5 stable5
#: kgpg.cpp:200
#, kde-format
msgid "Open editor"
msgstr ""
#. +> trunk5 stable5
#: kgpg.cpp:201
#, kde-format
msgid "Show encrypted file"
msgstr ""
#. +> trunk5 stable5
#: kgpg.cpp:202 kgpgoptions.cpp:512
#, kde-format
msgid "Sign File"
msgstr ""
#. +> trunk5 stable5
#: kgpg.cpp:203
#, kde-format
msgid "Verify signature"
msgstr ""
#. +> trunk5 stable5
#: kgpg.cpp:204
#, kde-format
msgid "File to open"
msgstr ""
#. +> trunk5 stable5
#: kgpg.h:33
#, kde-format
msgid ""
"Hi,\n"
"\n"
"please find attached the user id '%UIDNAME%' of your key %KEYID% signed by me. This mail is encrypted with that key to make sure you control both the email address and the key.\n"
"\n"
"If you have multiple user ids, I sent the signature for each user id separately to that user id's associated email address. You can import the signatures by running each through `gpg --import` after you have decrypted them with `gpg --decrypt`.\n"
"\n"
"If you are using KGpg store the attachment to disk and then import it. Just select `Import Key...` from `Keys` menu and open the file.\n"
"\n"
"Note that I did not upload your key to any keyservers. If you want this new signature to be available to others, please upload it yourself. With GnuPG this can be done using gpg --keyserver subkeys.pgp.net --send-key %KEYID%.\n"
"\n"
"With KGpg you can right click on the key once you imported all user ids and choose `Export Public Key...`.\n"
"\n"
"If you have any questions, don't hesitate to ask.\n"
msgstr ""
#. i18n: ectx: label, entry (CustomDecrypt), group (Decryption)
#. +> trunk5 stable5
#: kgpg.kcfg:13
#, kde-format
msgid "Custom decryption command."
msgstr ""
#. i18n: ectx: label, entry (CustomEncryptionOptions), group (Encryption)
#. +> trunk5 stable5
#: kgpg.kcfg:19
#, kde-format
msgid "Custom encryption options"
msgstr ""
#. i18n: ectx: label, entry (AllowCustomEncryptionOptions), group (Encryption)
#. +> trunk5 stable5
#: kgpg.kcfg:22
#, kde-format
msgid "Allow custom encryption options"
msgstr ""
#. i18n: ectx: label, entry (FileEncryptionKey), group (Encryption)
#. +> trunk5 stable5
#: kgpg.kcfg:26
#, kde-format
msgid "File encryption key."
msgstr ""
#. i18n: ectx: label, entry (EncryptFilesTo), group (Encryption)
#. +> trunk5 stable5
#: kgpg.kcfg:29
#, kde-format
msgid "Encrypt files"
msgstr ""
#. i18n: ectx: label, entry (AsciiArmor), group (Encryption)
#. +> trunk5 stable5
#: kgpg.kcfg:33
#, kde-format
msgid "Use ASCII armored encryption."
msgstr ""
#. i18n: ectx: label, entry (AllowUntrustedKeys), group (Encryption)
#. +> trunk5 stable5
#: kgpg.kcfg:37
#, kde-format
msgid "Allow encryption with untrusted keys."
msgstr ""
#. i18n: ectx: label, entry (AllowUntrustedGroupMembers), group (Encryption)
#. +> trunk5 stable5
#: kgpg.kcfg:41
#, kde-format
msgid "Allow untrusted keys to become members of key groups."
msgstr ""
#. i18n: ectx: label, entry (HideUserID), group (Encryption)
#. +> trunk5 stable5
#: kgpg.kcfg:45
#, kde-format
msgid "Hide the user ID."
msgstr ""
#. i18n: ectx: label, entry (PgpCompatibility), group (Encryption)
#. +> trunk5 stable5
#: kgpg.kcfg:49
#, kde-format
msgid "Enable PGP 6 compatibility."
msgstr ""
#. i18n: ectx: label, entry (PgpExtension), group (Encryption)
#. +> trunk5 stable5
#: kgpg.kcfg:53
#, kde-format
msgid "Use *.pgp extension for encrypted files."
msgstr ""
#. i18n: ectx: label, entry (GpgConfigPath), group (GPG Settings)
#. +> trunk5 stable5
#: kgpg.kcfg:60
#, kde-format
msgid "The path of the gpg configuration file."
msgstr ""
#. i18n: ectx: label, entry (GpgBinaryPath), group (GPG Settings)
#. +> trunk5 stable5
#: kgpg.kcfg:63
#, kde-format
msgid "The path of the gpg binary used by KGpg."
msgstr ""
#. i18n: ectx: label, entry (FirstRun), group (General Options)
#. +> trunk5 stable5
#: kgpg.kcfg:79
#, kde-format
msgid "Is the first time the application runs."
msgstr ""
#. i18n: ectx: label, entry (EditorGeometry), group (General Options)
#. +> trunk5 stable5
#: kgpg.kcfg:83
#, kde-format
msgid "The size of the editor window."
msgstr ""
#. i18n: ectx: label, entry (ShowTrust), group (General Options)
#. +> trunk5 stable5
#: kgpg.kcfg:86
#, kde-format
msgid "Show the trust value in key manager."
msgstr ""
#. i18n: ectx: label, entry (ShowExpi), group (General Options)
#. +> trunk5 stable5
#: kgpg.kcfg:90
#, kde-format
msgid "Show the expiration value in key manager."
msgstr ""
#. i18n: ectx: label, entry (ShowSize), group (General Options)
#. +> trunk5 stable5
#: kgpg.kcfg:94
#, kde-format
msgid "Show the size value in key manager."
msgstr ""
#. i18n: ectx: label, entry (ShowCreat), group (General Options)
#. +> trunk5 stable5
#: kgpg.kcfg:98
#, kde-format
msgid "Show the creation value in key manager."
msgstr ""
#. i18n: ectx: label, entry (ShowSecret), group (General Options)
#. +> trunk5 stable5
#: kgpg.kcfg:102
#, kde-format
msgid "Show only secret keys in key manager."
msgstr ""
#. i18n: ectx: label, entry (ShowLongKeyId), group (General Options)
#. +> trunk5 stable5
#: kgpg.kcfg:106
#, kde-format
msgid "Show long key id in key manager."
msgstr ""
#. i18n: ectx: label, entry (TrustLevel), group (General Options)
#. +> trunk5 stable5
#: kgpg.kcfg:110
#, kde-format
msgid "Show only keys with at least that trust level in key manager."
msgstr ""
#. i18n: ectx: label, entry (UseMouseSelection), group (User Interface)
#. +> trunk5 stable5
#: kgpg.kcfg:124
#, kde-format
msgid "Use the mouse selection instead of the clipboard."
msgstr ""
#. i18n: ectx: label, entry (AutoStart), group (User Interface)
#. +> trunk5 stable5
#: kgpg.kcfg:128 kgpgfirstassistant.cpp:234
#, kde-format
msgid "Start KGpg automatically at KDE startup."
msgstr ""
#. i18n: ectx: label, entry (RemoteFileWarn), group (User Interface)
#. +> trunk5 stable5
#: kgpg.kcfg:132
#, kde-format
msgid "Display a warning before creating temporary files during remote file operations."
msgstr ""
#. i18n: ectx: label, entry (LeftClick), group (User Interface)
#. +> trunk5 stable5
#: kgpg.kcfg:136
#, kde-format
msgid "Choose default left-click behavior"
msgstr ""
#. i18n: ectx: label, entry (EncryptedDropEvent), group (User Interface)
#. +> trunk5 stable5
#: kgpg.kcfg:143
#, kde-format
msgid "Handle encrypted drops"
msgstr ""
#. i18n: ectx: label, entry (UnencryptedDropEvent), group (User Interface)
#. +> trunk5 stable5
#: kgpg.kcfg:151
#, kde-format
msgid "Handle unencrypted drops"
msgstr ""
#. i18n: ectx: label, entry (SignMenu), group (User Interface)
#. +> trunk5 stable5
#: kgpg.kcfg:159
#, kde-format
msgid "Show the \"sign file\" service menu."
msgstr ""
#. i18n: ectx: label, entry (DecryptMenu), group (User Interface)
#. +> trunk5 stable5
#: kgpg.kcfg:167
#, kde-format
msgid "Show the \"decrypt file\" service menu."
msgstr ""
#. i18n: ectx: label, entry (ShowSystray), group (User Interface)
#. +> trunk5 stable5
#: kgpg.kcfg:176
#, kde-format
msgid "Show the systray icon"
msgstr ""
#. i18n: ectx: label, entry (RecentFiles), group (User Interface)
#. +> trunk5 stable5
#: kgpg.kcfg:180
#, kde-format
msgid "The number of recently opened files shown in the editor menu."
msgstr ""
#. i18n: ectx: label, entry (ShowTipOfDay), group (TipOfDay)
#. +> trunk5 stable5
#: kgpg.kcfg:187
#, kde-format
msgid "Show tip of the day."
msgstr ""
#. i18n: ectx: label, entry (ColorGood), group (Key Colors)
#. +> trunk5 stable5
#: kgpg.kcfg:194
#, kde-format
msgid "Color used for trusted keys."
msgstr ""
#. i18n: ectx: label, entry (ColorRev), group (Key Colors)
#. +> trunk5 stable5
#: kgpg.kcfg:198
#, kde-format
msgid "Color used for revoked keys."
msgstr ""
#. i18n: ectx: label, entry (ColorUnknown), group (Key Colors)
#. +> trunk5 stable5
#: kgpg.kcfg:202
#, kde-format
msgid "Color used for unknown keys."
msgstr ""
#. i18n: ectx: label, entry (ColorBad), group (Key Colors)
#. +> trunk5 stable5
#: kgpg.kcfg:206
#, kde-format
msgid "Color used for untrusted keys."
msgstr ""
#. i18n: ectx: label, entry (ColorUltimate), group (Key Colors)
#. +> trunk5 stable5
#: kgpg.kcfg:210
#, kde-format
msgid "Color used for ultimately trusted keys."
msgstr ""
#. i18n: ectx: label, entry (ColorMarginal), group (Key Colors)
#. +> trunk5 stable5
#: kgpg.kcfg:214
#, kde-format
msgid "Color used for marginally trusted keys."
msgstr ""
#. i18n: ectx: label, entry (ColorExpired), group (Key Colors)
#. +> trunk5 stable5
#: kgpg.kcfg:218
#, kde-format
msgid "Color used for expired keys."
msgstr ""
#. i18n: ectx: label, entry (Font), group (Text Font)
#. +> trunk5 stable5
#: kgpg.kcfg:225
#, kde-format
msgid "Font"
msgstr ""
#. i18n: ectx: label, entry (KeyServers), group (Servers)
#. +> trunk5 stable5
#: kgpg.kcfg:248
#, kde-format
msgid "Key servers used by KGpg. The first server in the list is the default server."
msgstr ""
#. i18n: ectx: label, entry (InfoServers), group (Servers)
#. +> trunk5 stable5
#: kgpg.kcfg:252
#, kde-format
msgid "List of URLs that show details and analysis of the given key. The first server in the list is the default server."
msgstr ""
#. i18n: ectx: label, entry (UseProxy), group (Key Servers)
#. +> trunk5 stable5
#: kgpg.kcfg:259
#, kde-format
msgid "Use HTTP proxy when available."
msgstr ""
#. i18n: ectx: label, entry (EmailTemplate), group (Key Signing)
#. +> trunk5 stable5
#: kgpg.kcfg:266
#, kde-format
msgid "This is the text of the email sent by the \"Sign and Mail User ID\" action."
msgstr ""
#. +> trunk5 stable5
#: kgpgexternalactions.cpp:134
#, kde-format
msgid "Cannot create temporary file for folder compression."
"<qt>KGpg will now create a temporary archive file:<br />"
"<b>%1</b> to process the encryption. The file will be deleted after the encryption is finished.</qt>"
msgstr ""
#. +> trunk5 stable5
#: kgpgexternalactions.cpp:155
#, kde-format
msgid "Compression method for archive:"
msgstr ""
#. +> trunk5 stable5
#: kgpgexternalactions.cpp:410
#, kde-format
msgid "Decryption of this file failed:"
msgid_plural "Decryption of these files failed:"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: kgpgexternalactions.cpp:434
#, kde-format
msgid ""
"<qt>You have not set a path to your GnuPG config file.<br />"
"This may cause some surprising results in KGpg's execution.<br />"
"Would you like to start KGpg's assistant to fix this problem?</qt>"
msgstr ""
#. +> trunk5 stable5
#: kgpgexternalactions.cpp:436
#, kde-format
msgid "Start Assistant"
msgstr ""
#. +> trunk5 stable5
#: kgpgexternalactions.cpp:436
#, kde-format
msgid "Do Not Start"
msgstr ""
#. +> trunk5 stable5
#: kgpgfirstassistant.cpp:46
#, kde-format
msgid "KGpg Assistant"
msgstr ""
#. +> trunk5 stable5
#: kgpgfirstassistant.cpp:71
#, kde-format
msgid "This assistant will first setup some basic configuration options required for KGpg to work properly. Next, it will allow you to create your own key pair, enabling you to encrypt your files and emails."
msgstr ""
#. +> trunk5 stable5
#: kgpgfirstassistant.cpp:79
#, kde-format
msgid "Welcome to the KGpg Assistant"
msgstr ""
#. +> trunk5 stable5
#: kgpgfirstassistant.cpp:91
#, kde-format
msgid "KGpg needs to know which GnuPG binary to use."
"<p>A photo can be included with a public key for extra security. The photo can be used as an additional method of authenticating the key. However, it should not be relied upon as the only form of authentication.</p>"
msgid "Select Public Key for %2 and one more file"
msgid_plural "Select Public Key for %2 and %1 more files"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: selectpublickeydialog.cpp:86
#, kde-format
msgid "&Search: "
msgstr ""
#. +> trunk5 stable5
#: selectpublickeydialog.cpp:103
#, kde-format
msgid "<b>Public keys list</b>: select the key that will be used for encryption."
msgstr ""
#. +> trunk5 stable5
#: selectpublickeydialog.cpp:118
#, kde-format
msgid "<b>ASCII encryption</b>: makes it possible to open the encrypted file/message in a text editor"
msgstr ""
#. +> trunk5 stable5
#: selectpublickeydialog.cpp:126
#, kde-format
msgid "<b>Allow encryption with untrusted keys</b>: when you import a public key, it is usually marked as untrusted and you cannot use it unless you sign it in order to make it 'trusted'. Checking this box enables you to use any key, even if it has not be signed."
msgstr ""
#. +> trunk5 stable5
#: selectpublickeydialog.cpp:133
#, kde-format
msgid "<b>Hide user ID</b>: Do not put the keyid into encrypted packets. This option hides the receiver of the message and is a countermeasure against traffic analysis. It may slow down the decryption process because all available secret keys are tried."
msgstr ""
#. +> trunk5 stable5
#: selectpublickeydialog.cpp:137
#, kde-format
msgid "Symmetrical encryption"
msgstr ""
#. +> trunk5 stable5
#: selectpublickeydialog.cpp:139
#, kde-format
msgid "<b>Symmetrical encryption</b>: encryption does not use keys. You just need to give a password to encrypt/decrypt the file"
msgstr ""
#. +> trunk5 stable5
#: selectpublickeydialog.cpp:153
#, kde-format
msgid "Custom option:"
msgstr ""
#. +> trunk5 stable5
#: selectpublickeydialog.cpp:158
#, kde-format
msgid "<b>Custom option</b>: for experienced users only, allows you to enter a gpg command line option, like: '--armor'"
msgstr ""
#. +> trunk5 stable5
#: selectsecretkey.cpp:38
#, kde-format
msgid "Private Key List"
msgstr ""
#. +> trunk5 stable5
#: selectsecretkey.cpp:52
#, kde-format
msgid "Choose secret key for signing:"
msgstr ""
#. +> trunk5 stable5
#: selectsecretkey.cpp:67
#, kde-format
msgid "How carefully have you checked that the key really belongs to the person with whom you wish to communicate:"
msgid_plural "How carefully have you checked that the %1 keys really belong to the people with whom you wish to communicate:"
msgid "Enter the ids or fingerprints of the keys to import as space separated list."
msgstr ""
#. i18n: ectx: @info:tipoftheday
#. +> trunk5 stable5
#: tips:2
#, kde-format
msgid ""
"<p>If you want to decrypt a text file, simply drag and drop it into the editor window. KGpg will do the rest. Even remote files can be dropped.</p>"
"\n"
"<p>Drag a public key into the editor window and kgpg will automatically import it if you want.</p>"
"\n"
msgstr ""
#. i18n: ectx: @info:tipoftheday
#. +> trunk5 stable5
#: tips:7
#, kde-format
msgid ""
"<p>The easiest way to encrypt a file: simply right click on the file, and you have an encrypt option in the contextual menu.\n"
"This works in <strong>konqueror</strong> or on your Desktop!</p>"
"\n"
msgstr ""
#. i18n: ectx: @info:tipoftheday
#. +> trunk5 stable5
#: tips:13
#, kde-format
msgid ""
"<p>If you want to encrypt a message for several persons, just select several encryption keys by pressing the "Ctrl" key.</p>"
"\n"
msgstr ""
#. i18n: ectx: @info:tipoftheday
#. +> trunk5 stable5
#: tips:18
#, kde-format
msgid ""
"<p><strong>You do not have to be an expert in encryption to use this tool?</strong><br>"
"\n"
"Simply create yourself a key pair in the key management window. Then, export your public key and mail it to your friends.<br>"
"\n"
"Ask them to do the same and import their public keys. Finally, to send an encrypted message, type it in the KGpg editor, then click "encrypt". Choose\n"
"your friend's key and click "encrypt" again. The message will be encrypted, ready to be sent by email.</p>"
"\n"
msgstr ""
#. i18n: ectx: @info:tipoftheday
#. +> trunk5 stable5
#: tips:26
#, kde-format
msgid ""
"<p>To perform an operation on a key, open the key management window and right click on the key. A popup menu with all available options will appear.</p>"
"\n"
msgstr ""
#. i18n: ectx: @info:tipoftheday
#. +> trunk5 stable5
#: tips:31
#, kde-format
msgid ""
"<p>Decrypt a file with a single mouse click on it. You will then be prompted for password, and then that is it!</p>"
"\n"
msgstr ""
#. i18n: ectx: @info:tipoftheday
#. +> trunk5 stable5
#: tips:36
#, kde-format
msgid ""
"<p>If you only want to open the key manager, type this in the command line prompt: "
"<pre>kgpg -k</pre>"
"\n"
"The editor can be reached by: "
"<pre>kgpg -d</pre>"
"</p>"
"\n"
msgstr ""
#. i18n: ectx: @info:tipoftheday
#. +> trunk5 stable5
#: tips:42
#, kde-format
msgid ""
"<p>To open a file in the KGpg's editor and immediately decrypt it type: "
"<pre>kgpg -s filename</pre>"
"</p>"
"\n"
msgstr ""
#. i18n: ectx: @info:tipoftheday
#. +> trunk5 stable5
#: tips:47
#, kde-format
msgid ""
"<p>If you want to change the password or expiration of a secret key simply double click on it to get the key properties dialog.</p>"
"\n"
msgstr ""
#. i18n: ectx: @info:tipoftheday
#. +> trunk5 stable5
#: tips:52
#, kde-format
msgid ""
"<p>You can reach your default key by pressing "Ctrl+Home" in the key manager.</p>"
"\n"
msgstr ""
#. i18n: ectx: @info:tipoftheday
#. +> trunk5 stable5
#: tips:57
#, kde-format
msgid ""
"<p>The number of signatures is shown as a tooltip if you hover the mouse on the size column in key manager. A key has to be expanded once for this to work.</p>"
"\n"
msgstr ""
#. +> trunk5 stable5
-#: transactions/kgpgaddphoto.cpp:41
+#: transactions/kgpgaddphoto.cpp:50
#, kde-format
msgid "This image is very large. Use it anyway?"
msgstr ""
#. +> trunk5 stable5
-#: transactions/kgpgaddphoto.cpp:41
+#: transactions/kgpgaddphoto.cpp:50
#, kde-format
msgid "Use Anyway"
msgstr ""
#. +> trunk5 stable5
-#: transactions/kgpgaddphoto.cpp:41
+#: transactions/kgpgaddphoto.cpp:50
#, kde-format
msgid "Do Not Use"
msgstr ""
#. +> trunk5 stable5
#: transactions/kgpgchangepass.cpp:66
#, kde-format
msgid "Enter old passphrase for <b>%1</b>"
msgstr ""
#. +> trunk5 stable5
#: transactions/kgpgchangepass.cpp:68
#, kde-format
msgid ""
"<qt>Enter new passphrase for <b>%1</b><br />"
"If you forget this passphrase all your encrypted files and messages will be inaccessible.</qt>"
msgctxt "Status message 'Decrypted <filename>' (operation was completed)"
msgid "Decrypted %1"
msgstr ""
#. +> trunk5 stable5
#: transactions/kgpggeneratekey.cpp:63
#, kde-format
msgid "Generating New Key for %1"
msgstr ""
#. +> trunk5 stable5
#: transactions/kgpggeneratekey.cpp:136
#, kde-format
msgid ""
"<p><b>Enter passphrase for %1 <%2></b>:<br />"
"Passphrase should include non alphanumeric characters and random sequences.</p>"
msgstr ""
#. +> trunk5 stable5
#: transactions/kgpggeneratekey.cpp:139
#, kde-format
msgid ""
"<p><b>Enter passphrase for %1</b>:<br />"
"Passphrase should include non alphanumeric characters and random sequences.</p>"
msgstr ""
#. +> trunk5 stable5
#: transactions/kgpggeneratekey.cpp:150
#, kde-format
msgid "Generating Key"
msgstr ""
#. +> trunk5 stable5
#: transactions/kgpggeneratekey.cpp:163
#, kde-format
msgid "Generating prime numbers"
msgstr ""
#. +> trunk5 stable5
#: transactions/kgpggeneratekey.cpp:165
#, kde-format
msgid "Generating DSA key"
msgstr ""
#. +> trunk5 stable5
#: transactions/kgpggeneratekey.cpp:167
#, kde-format
msgid "Generating ElGamal key"
msgstr ""
#. +> trunk5 stable5
#: transactions/kgpggeneratekey.cpp:169
#, kde-format
msgid "Waiting for entropy"
msgstr ""
#. +> trunk5 stable5
#: transactions/kgpggeneratekey.cpp:174
#, kde-format
msgid "The entropy pool ran empty. The key generation process is stalled until enough entropy is present. You can generate entropy e.g. by moving the mouse or typing at the keyboard. The easiest way is by using another application until the key generation continues."
msgstr ""
#. +> trunk5 stable5
#: transactions/kgpggeneratekey.cpp:217
#, kde-format
msgid "Key %1 generated"
msgstr ""
#. +> trunk5 stable5
#: transactions/kgpggeneraterevoke.cpp:50
#, kde-format
msgid "Generating Revocation Certificate for key %1"
msgstr ""
#. +> trunk5 stable5
#: transactions/kgpgimport.cpp:129
#, kde-kuit-format
msgctxt "@info"
msgid ""
"The import result string has an unsupported format in line %1.<nl/>"
"Please see the detailed log for more information."
msgstr ""
#. +> trunk5 stable5
#: transactions/kgpgimport.cpp:133
#, kde-format
msgid ""
"No key imported.<br />"
"Please see the detailed log for more information."
"There are conflicting encryption preferences for these recipients.\n"
"Encrypt this message?"
msgstr ""
#. +> trunk5 stable5
-#: composer/composerviewbase.cpp:1928
+#: composer/composerviewbase.cpp:1936
#, kde-format
msgid "Do &Not Encrypt"
msgstr ""
#. +> trunk5 stable5
-#: composer/composerviewbase.cpp:1950
+#: composer/composerviewbase.cpp:1958
#, kde-format
msgid "You have requested to encrypt this message, and to encrypt a copy to yourself, but no valid trusted encryption keys have been configured for this identity."
msgid "One or more of your configured OpenPGP encryption keys or S/MIME certificates is not fully trusted for encryption."
msgstr ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:344
#, kde-format
msgid "One or more of the OpenPGP encryption keys or S/MIME certificates for recipient \"%1\" is not fully trusted for encryption."
msgstr ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:350
#, kde-format
msgid ""
"\n"
"The following keys are only marginally trusted: \n"
msgstr ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:354
#, kde-format
msgid ""
"\n"
"The following keys or certificates have unknown trust level: \n"
msgstr ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:358
#, kde-format
msgid ""
"\n"
"The following keys or certificates are <b>revoked</b>: \n"
msgstr ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:362
#, kde-format
msgid "Not Fully Trusted Encryption Keys"
msgstr ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:694
#, kde-format
msgid ""
"<p>Your OpenPGP signing key</p>"
"<p align=center><b>%2</b> (KeyID 0x%3)</p>"
"<p>expired less than a day ago.</p>"
msgid_plural ""
"<p>Your OpenPGP signing key</p>"
"<p align=center><b>%2</b> (KeyID 0x%3)</p>"
"<p>expired %1 days ago.</p>"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:698
#, kde-format
msgid ""
"<p>Your OpenPGP encryption key</p>"
"<p align=center><b>%2</b> (KeyID 0x%3)</p>"
"<p>expired less than a day ago.</p>"
msgid_plural ""
"<p>Your OpenPGP encryption key</p>"
"<p align=center><b>%2</b> (KeyID 0x%3)</p>"
"<p>expired %1 days ago.</p>"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:702
#, kde-format
msgid ""
"<p>The OpenPGP key for</p>"
"<p align=center><b>%2</b> (KeyID 0x%3)</p>"
"<p>expired less than a day ago.</p>"
msgid_plural ""
"<p>The OpenPGP key for</p>"
"<p align=center><b>%2</b> (KeyID 0x%3)</p>"
"<p>expired %1 days ago.</p>"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:713
#, kde-format
msgid ""
"<p>The root certificate</p>"
"<p align=center><b>%4</b></p>"
"<p>for your S/MIME signing certificate</p>"
"<p align=center><b>%2</b> (serial number %3)</p>"
"<p>expired less than a day ago.</p>"
msgid_plural ""
"<p>The root certificate</p>"
"<p align=center><b>%4</b></p>"
"<p>for your S/MIME signing certificate</p>"
"<p align=center><b>%2</b> (serial number %3)</p>"
"<p>expired %1 days ago.</p>"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:719
#, kde-format
msgid ""
"<p>The root certificate</p>"
"<p align=center><b>%4</b></p>"
"<p>for your S/MIME encryption certificate</p>"
"<p align=center><b>%2</b> (serial number %3)</p>"
"<p>expired less than a day ago.</p>"
msgid_plural ""
"<p>The root certificate</p>"
"<p align=center><b>%4</b></p>"
"<p>for your S/MIME encryption certificate</p>"
"<p align=center><b>%2</b> (serial number %3)</p>"
"<p>expired %1 days ago.</p>"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:725
#, kde-format
msgid ""
"<p>The root certificate</p>"
"<p align=center><b>%4</b></p>"
"<p>for S/MIME certificate</p>"
"<p align=center><b>%2</b> (serial number %3)</p>"
"<p>expired less than a day ago.</p>"
msgid_plural ""
"<p>The root certificate</p>"
"<p align=center><b>%4</b></p>"
"<p>for S/MIME certificate</p>"
"<p align=center><b>%2</b> (serial number %3)</p>"
"<p>expired %1 days ago.</p>"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:732
#, kde-format
msgid ""
"<p>The intermediate CA certificate</p>"
"<p align=center><b>%4</b></p>"
"<p>for your S/MIME signing certificate</p>"
"<p align=center><b>%2</b> (serial number %3)</p>"
"<p>expired less than a day ago.</p>"
msgid_plural ""
"<p>The intermediate CA certificate</p>"
"<p align=center><b>%4</b></p>"
"<p>for your S/MIME signing certificate</p>"
"<p align=center><b>%2</b> (serial number %3)</p>"
"<p>expired %1 days ago.</p>"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:738
#, kde-format
msgid ""
"<p>The intermediate CA certificate</p>"
"<p align=center><b>%4</b></p>"
"<p>for your S/MIME encryption certificate</p>"
"<p align=center><b>%2</b> (serial number %3)</p>"
"<p>expired less than a day ago.</p>"
msgid_plural ""
"<p>The intermediate CA certificate</p>"
"<p align=center><b>%4</b></p>"
"<p>for your S/MIME encryption certificate</p>"
"<p align=center><b>%2</b> (serial number %3)</p>"
"<p>expired %1 days ago.</p>"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:744
#, kde-format
msgid ""
"<p>The intermediate CA certificate</p>"
"<p align=center><b>%4</b></p>"
"<p>for S/MIME certificate</p>"
"<p align=center><b>%2</b> (serial number %3)</p>"
"<p>expired less than a day ago.</p>"
msgid_plural ""
"<p>The intermediate CA certificate</p>"
"<p align=center><b>%4</b></p>"
"<p>for S/MIME certificate</p>"
"<p align=center><b>%2</b> (serial number %3)</p>"
"<p>expired %1 days ago.</p>"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:756
#, kde-format
msgid ""
"<p>Your S/MIME signing certificate</p>"
"<p align=center><b>%2</b> (serial number %3)</p>"
"<p>expired less than a day ago.</p>"
msgid_plural ""
"<p>Your S/MIME signing certificate</p>"
"<p align=center><b>%2</b> (serial number %3)</p>"
"<p>expired %1 days ago.</p>"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:760
#, kde-format
msgid ""
"<p>Your S/MIME encryption certificate</p>"
"<p align=center><b>%2</b> (serial number %3)</p>"
"<p>expired less than a day ago.</p>"
msgid_plural ""
"<p>Your S/MIME encryption certificate</p>"
"<p align=center><b>%2</b> (serial number %3)</p>"
"<p>expired %1 days ago.</p>"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:764
#, kde-format
msgid ""
"<p>The S/MIME certificate for</p>"
"<p align=center><b>%2</b> (serial number %3)</p>"
"<p>expired less than a day ago.</p>"
msgid_plural ""
"<p>The S/MIME certificate for</p>"
"<p align=center><b>%2</b> (serial number %3)</p>"
"<p>expired %1 days ago.</p>"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:775
#, kde-format
msgid "OpenPGP Key Expired"
msgstr ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:776
#, kde-format
msgid "S/MIME Certificate Expired"
msgstr ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:800
#, kde-format
msgid ""
"<p>Your OpenPGP signing key</p>"
"<p align=\"center\"><b>%2</b> (KeyID 0x%3)</p>"
"<p>expires in less than a day.</p>"
msgid_plural ""
"<p>Your OpenPGP signing key</p>"
"<p align=\"center\"><b>%2</b> (KeyID 0x%3)</p>"
"<p>expires in less than %1 days.</p>"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:804
#, kde-format
msgid ""
"<p>Your OpenPGP encryption key</p>"
"<p align=\"center\"><b>%2</b> (KeyID 0x%3)</p>"
"<p>expires in less than a day.</p>"
msgid_plural ""
"<p>Your OpenPGP encryption key</p>"
"<p align=\"center\"><b>%2</b> (KeyID 0x%3)</p>"
"<p>expires in less than %1 days.</p>"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:808
#, kde-format
msgid ""
"<p>The OpenPGP key for</p>"
"<p align=\"center\"><b>%2</b> (KeyID 0x%3)</p>"
"<p>expires in less than a day.</p>"
msgid_plural ""
"<p>The OpenPGP key for</p>"
"<p align=\"center\"><b>%2</b> (KeyID 0x%3)</p>"
"<p>expires in less than %1 days.</p>"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:819
#, kde-format
msgid ""
"<p>The root certificate</p>"
"<p align=\"center\"><b>%4</b></p>"
"<p>for your S/MIME signing certificate</p>"
"<p align=\"center\"><b>%2</b> (serial number %3)</p>"
"<p>expires in less than a day.</p>"
msgid_plural ""
"<p>The root certificate</p>"
"<p align=\"center\"><b>%4</b></p>"
"<p>for your S/MIME signing certificate</p>"
"<p align=\"center\"><b>%2</b> (serial number %3)</p>"
"<p>expires in less than %1 days.</p>"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:825
#, kde-format
msgid ""
"<p>The root certificate</p>"
"<p align=\"center\"><b>%4</b></p>"
"<p>for your S/MIME encryption certificate</p>"
"<p align=\"center\"><b>%2</b> (serial number %3)</p>"
"<p>expires in less than a day.</p>"
msgid_plural ""
"<p>The root certificate</p>"
"<p align=\"center\"><b>%4</b></p>"
"<p>for your S/MIME encryption certificate</p>"
"<p align=\"center\"><b>%2</b> (serial number %3)</p>"
"<p>expires in less than %1 days.</p>"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:831
#, kde-format
msgid ""
"<p>The root certificate</p>"
"<p align=\"center\"><b>%4</b></p>"
"<p>for S/MIME certificate</p>"
"<p align=\"center\"><b>%2</b> (serial number %3)</p>"
"<p>expires in less than a day.</p>"
msgid_plural ""
"<p>The root certificate</p>"
"<p align=\"center\"><b>%4</b></p>"
"<p>for S/MIME certificate</p>"
"<p align=\"center\"><b>%2</b> (serial number %3)</p>"
"<p>expires in less than %1 days.</p>"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:838
#, kde-format
msgid ""
"<p>The intermediate CA certificate</p>"
"<p align=\"center\"><b>%4</b></p>"
"<p>for your S/MIME signing certificate</p>"
"<p align=\"center\"><b>%2</b> (serial number %3)</p>"
"<p>expires in less than a day.</p>"
msgid_plural ""
"<p>The intermediate CA certificate</p>"
"<p align=\"center\"><b>%4</b></p>"
"<p>for your S/MIME signing certificate</p>"
"<p align=\"center\"><b>%2</b> (serial number %3)</p>"
"<p>expires in less than %1 days.</p>"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:844
#, kde-format
msgid ""
"<p>The intermediate CA certificate</p>"
"<p align=\"center\"><b>%4</b></p>"
"<p>for your S/MIME encryption certificate</p>"
"<p align=\"center\"><b>%2</b> (serial number %3)</p>"
"<p>expires in less than a day.</p>"
msgid_plural ""
"<p>The intermediate CA certificate</p>"
"<p align=\"center\"><b>%4</b></p>"
"<p>for your S/MIME encryption certificate</p>"
"<p align=\"center\"><b>%2</b> (serial number %3)</p>"
"<p>expires in less than %1 days.</p>"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:850
#, kde-format
msgid ""
"<p>The intermediate CA certificate</p>"
"<p align=\"center\"><b>%4</b></p>"
"<p>for S/MIME certificate</p>"
"<p align=\"center\"><b>%2</b> (serial number %3)</p>"
"<p>expires in less than a day.</p>"
msgid_plural ""
"<p>The intermediate CA certificate</p>"
"<p align=\"center\"><b>%4</b></p>"
"<p>for S/MIME certificate</p>"
"<p align=\"center\"><b>%2</b> (serial number %3)</p>"
"<p>expires in less than %1 days.</p>"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:862
#, kde-format
msgid ""
"<p>Your S/MIME signing certificate</p>"
"<p align=\"center\"><b>%2</b> (serial number %3)</p>"
"<p>expires in less than a day.</p>"
msgid_plural ""
"<p>Your S/MIME signing certificate</p>"
"<p align=\"center\"><b>%2</b> (serial number %3)</p>"
"<p>expires in less than %1 days.</p>"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:866
#, kde-format
msgid ""
"<p>Your S/MIME encryption certificate</p>"
"<p align=\"center\"><b>%2</b> (serial number %3)</p>"
"<p>expires in less than a day.</p>"
msgid_plural ""
"<p>Your S/MIME encryption certificate</p>"
"<p align=\"center\"><b>%2</b> (serial number %3)</p>"
"<p>expires in less than %1 days.</p>"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:870
#, kde-format
msgid ""
"<p>The S/MIME certificate for</p>"
"<p align=\"center\"><b>%2</b> (serial number %3)</p>"
"<p>expires in less than a day.</p>"
msgid_plural ""
"<p>The S/MIME certificate for</p>"
"<p align=\"center\"><b>%2</b> (serial number %3)</p>"
"<p>expires in less than %1 days.</p>"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:881
#, kde-format
msgid "OpenPGP Key Expires Soon"
msgstr ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:882
#, kde-format
msgid "S/MIME Certificate Expires Soon"
msgstr ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:921
#, kde-format
msgid ""
"One or more of your configured OpenPGP encryption keys or S/MIME certificates is not usable for encryption. Please reconfigure your encryption keys and certificates for this identity in the identity configuration dialog.\n"
"If you choose to continue, and the keys are needed later on, you will be prompted to specify the keys to use."
"One or more of your configured OpenPGP signing keys or S/MIME signing certificates is not usable for signing. Please reconfigure your signing keys and certificates for this identity in the identity configuration dialog.\n"
"If you choose to continue, and the keys are needed later on, you will be prompted to specify the keys to use."
msgid "You did not select an encryption key for the recipient of this message; therefore, the message will not be encrypted."
msgstr ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:1653
#, kde-format
msgid "You did not select an encryption key for any of the recipients of this message; therefore, the message will not be encrypted."
msgstr ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:1665
#, kde-format
msgid "You did not select an encryption key for one of the recipients: this person will not be able to decrypt the message if you encrypt it."
msgstr ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:1668
#, kde-format
msgid "You did not select encryption keys for some of the recipients: these persons will not be able to decrypt the message if you encrypt it."
msgstr ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:1734
#, kde-format
msgid "Encryption Key Selection"
msgstr ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:1781
#, kde-format
msgctxt "if in your language something like 'certificate(s)' is not possible please use the plural in the translation"
msgid ""
"There is a problem with the encryption certificate(s) for \"%1\".\n"
"\n"
"Please re-select the certificate(s) which should be used for this recipient."
msgstr ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:1827
#, kde-format
msgctxt "if in your language something like 'certificate(s)' is not possible please use the plural in the translation"
msgid ""
"<qt>No valid and trusted encryption certificate was found for \"%1\".<br/>"
"<br/>"
"Select the certificate(s) which should be used for this recipient. If there is no suitable certificate in the list you can also search for external certificates by clicking the button: search for external certificates.</qt>"
msgstr ""
#. +> trunk5 stable5
#: composer/keyresolver.cpp:1837
#, kde-format
msgctxt "if in your language something like 'certificate(s)' is not possible please use the plural in the translation"
msgid ""
"More than one certificate matches \"%1\".\n"
"\n"
"Select the certificate(s) which should be used for this recipient."
msgid "<b>Note:</b> This is an HTML message. For security reasons, only the raw HTML code is shown. If you trust the sender of this message then you can activate formatted HTML display for this message <a href='kmail:showHTML'>by clicking here</a>."
msgid "<b>Note:</b> This HTML message may contain external references to images etc. For security/privacy reasons external references are not loaded. If you trust the sender of this message then you can load the external references for this message <a href='kmail:loadExternal'>by clicking here</a>."
msgid "This email contains a link which reads as '%1' in the text, but actually points to '%2'. This is often the case in scam emails to mislead the recipient"
msgstr ""
#. +> trunk5 stable5
#: scamdetection/scamdetectionwebengine.cpp:146
#, kde-format
msgid "This email contains a link which points to a numerical IP address (%1) instead of a typical textual website address. This is often the case in scam emails."
msgstr ""
#. +> trunk5 stable5
#: scamdetection/scamdetectionwebengine.cpp:151
#, kde-format
msgid "This email contains a link which points to a hexadecimal IP address (%1) instead of a typical textual website address. This is often the case in scam emails."
msgstr ""
#. +> trunk5 stable5
#: scamdetection/scamdetectionwebengine.cpp:156
#, kde-format
msgid "This email contains a link (%1) which has a redirection"
msgstr ""
#. +> trunk5 stable5
#: scamdetection/scamdetectionwebengine.cpp:163
#, kde-format
msgid "This email contains a link (%1) which contains multiple http://. This is often the case in scam emails."
msgstr ""
#. +> trunk5 stable5
#: scamdetection/scamdetectionwebengine.cpp:173
#, kde-format
msgid "This email contains a shorturl (%1). It can redirect to another server."
msgstr ""
#. +> trunk5 stable5
#: scamdetection/scamdetectionwebengine.cpp:206
#, kde-format
msgid "Message contains form element. This is often the case in scam emails."
msgstr ""
#. +> trunk5 stable5
#: scamdetection/scamexpandurljob.cpp:68
#, kde-format
msgid "No network connection detected, we cannot expand url."
msgstr ""
#. +> trunk5 stable5
#: scamdetection/scamexpandurljob.cpp:101
#, kde-format
msgid "Short url '%1' redirects to '%2'."
msgstr ""
#. i18n: ectx: label, entry (PrintSelectedText), group (Print)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:11
#, kde-format
msgid "Only print selected text in viewer"
msgstr ""
#. i18n: ectx: label, entry (RespectExpandCollapseSettings), group (Print)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:15
#, kde-format
msgid "Respect expand/collapse quote mark which is defined in settings during printing."
msgstr ""
#. i18n: ectx: label, entry (PrintBackgroundColorImages), group (Print)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:19
#, kde-format
msgid "Specifies whether the background color and images are also drawn when the page is printed."
msgstr ""
#. i18n: ectx: label, entry (MinimumFontSize), group (Fonts)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:30
#, kde-format
msgid "When we render html do not use font size inferior to minimum size."
msgstr ""
#. i18n: ectx: label, entry (BodyFont), group (Fonts)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:34
#, kde-format
msgid "Specifies the font to use for the message body"
msgstr ""
#. i18n: ectx: label, entry (PrintFont), group (Fonts)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:38
#, kde-format
msgid "Specifies the font to use for printing"
msgstr ""
#. i18n: ectx: label, entry (CloseAfterReplyOrForward), group (Reader)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:50
#, kde-format
msgid "Close message window after replying or forwarding"
msgstr ""
#. i18n: ectx: label, entry (ShowExpandQuotesMark), group (Reader)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:63
#, kde-format
msgid "Show expand/collapse quote marks"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowExpandQuotesMark), group (Reader)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:64
#, kde-format
msgid "Enable this option to show different levels of quoted text. Disable to hide the levels of quoted text."
msgstr ""
#. i18n: ectx: label, entry (CollapseQuoteLevelSpin), group (Reader)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:67
#, kde-format
msgid "Automatic collapse level:"
msgstr ""
#. i18n: ectx: label, entry (ShrinkQuotes), group (Reader)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:74
#, kde-format
msgid "Reduce font size for quoted text"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShrinkQuotes), group (Reader)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:75
#, kde-format
msgid "Enable this option to show quoted text with a smaller font."
msgstr ""
#. i18n: ectx: label, entry (AlwaysDecrypt), group (Reader)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:79
#, kde-format
msgid "Always decrypt messages when viewing or ask before decrypting"
msgstr ""
#. i18n: ectx: label, entry (MimeTreeMode2), group (Reader)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:82
#, kde-format
msgid "Message Structure Viewer"
msgstr ""
#. i18n: ectx: label, entry (MimeTreeMode2), group (Reader)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:85
#, kde-format
msgid "Show never"
msgstr ""
#. i18n: ectx: label, entry (MimeTreeMode2), group (Reader)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:88
#, kde-format
msgid "Show always"
msgstr ""
#. i18n: ectx: label, entry (headerPluginStyleName), group (Reader)
#. i18n: ectx: label, entry (headerStyle), group (Reader)
#. i18n: ectx: label, entry (headerSetDisplayed), group (Reader)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:110
#, kde-format
msgid "How much of headers should be displayed"
msgstr ""
#. i18n: ectx: label, entry (htmlMail), group (Reader)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:114
#, kde-format
msgid "Prefer HTML to plain text"
msgstr ""
#. i18n: ectx: label, entry (htmlLoadExternal), group (Reader)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:118
#, kde-format
msgid "Allow messages to load external references from the Internet"
msgstr ""
#. i18n: ectx: label, entry (attachmentStrategy), group (Reader)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:122
#, kde-format
msgid "How attachments are shown"
msgstr ""
#. i18n: ectx: label, entry (RecycleQuoteColors), group (Reader)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:126
#, kde-format
msgid "Specifies whether to reuse the quote color, beyond the 3rd level"
msgstr ""
#. i18n: ectx: label, entry (AccessKeyEnabled), group (Reader)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:130
#, kde-format
msgid "Activate Access Key"
msgstr ""
#. i18n: ectx: label, entry (ScamDetectionEnabled), group (Reader)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:134
#, kde-format
msgid "KMail can analyze messages for suspected email scams by looking for common techniques used to deceive you"
msgstr ""
#. i18n: ectx: label, entry (ScamDetectionWhiteList), group (Reader)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:138
#, kde-format
msgid "List of emails in scam white list"
msgstr ""
#. i18n: ectx: label, entry (notSendWhenEncrypted), group (MDN)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:144
#, kde-format
msgid "Do not send MDNs in response to encrypted messages"
msgstr ""
#. i18n: ectx: label, entry (DefaultPolicy), group (MDN)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:148
#, kde-format
msgid "Specifies the default policy to use, for the Message Disposition Notifications (for internal use only)"
msgstr ""
#. i18n: ectx: label, entry (QuoteMessage), group (MDN)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:152
#, kde-format
msgid "Specifies the default quoting action to take, when replying to a message (for internal use only)"
msgstr ""
#. i18n: ectx: label, entry (LegacyMangleFromToHeaders), group (Invitations)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:168
#, kde-format
msgid "Mangle From:/To: headers in replies to replies"
msgstr ""
#. i18n: ectx: whatsthis, entry (LegacyMangleFromToHeaders), group (Invitations)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:169
#, kde-format
msgid "Microsoft Outlook has a number of shortcomings in its implementation of the iCalendar standard; this option works around one of them. If you have problems with Outlook users not being able to get your replies, try setting this option."
msgstr ""
#. i18n: ectx: label, entry (LegacyBodyInvites), group (Invitations)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:174
#, kde-format
msgid "Send groupware invitations in the mail body"
msgstr ""
#. i18n: ectx: whatsthis, entry (LegacyBodyInvites), group (Invitations)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:175
#, kde-format
msgid "Microsoft Outlook has a number of shortcomings in its implementation of the iCalendar standard; this option works around one of them. If you have problems with Outlook users not being able to get your invitations, try setting this option."
msgstr ""
#. i18n: ectx: label, entry (ExchangeCompatibleInvitations), group (Invitations)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:180
#, kde-format
msgid "Exchange-compatible invitation naming"
msgstr ""
#. i18n: ectx: whatsthis, entry (ExchangeCompatibleInvitations), group (Invitations)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:181
#, kde-format
msgid "Microsoft Outlook, when used in combination with a Microsoft Exchange server, has a problem understanding standards-compliant groupware email. Turn this option on to send groupware invitations in a way that Microsoft Exchange understands."
msgstr ""
#. i18n: ectx: label, entry (AutomaticSending), group (Invitations)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:186
#, kde-format
msgid "Automatic invitation sending"
msgstr ""
#. i18n: ectx: whatsthis, entry (AutomaticSending), group (Invitations)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:187
#, kde-format
msgid "When this is checked, you will not see the mail composer window. Instead, all invitation mails are sent automatically. If you want to see the mail before sending it, you can uncheck this option. However, be aware that the text in the composer window is in iCalendar syntax, and you should not try modifying it by hand."
msgstr ""
#. i18n: ectx: label, entry (DeleteInvitationEmailsAfterSendingReply), group (Invitations)
msgid "Delete invitation emails after the reply to them has been sent"
msgstr ""
#. i18n: ectx: whatsthis, entry (DeleteInvitationEmailsAfterSendingReply), group (Invitations)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:193
#, kde-format
msgid "When this is checked, received invitation emails that have been replied to will be moved to the Trash folder, once the reply has been successfully sent."
msgstr ""
#. i18n: ectx: label, entry (UseFixedFont), group (Composer)
msgid "This web site is a malware, do you want to continue to show it?"
msgstr ""
#. +> trunk5 stable5
#: viewer/viewer_p.cpp:2046
#, kde-format
msgid "Malware"
msgstr ""
#. +> trunk5 stable5
#: viewer/viewer_p.cpp:2101
#, kde-format
msgid "Copy Email Address"
msgstr ""
#. +> trunk5 stable5
#: viewer/viewer_p.cpp:2195
#, kde-format
msgid "Message as Plain Text"
msgstr ""
#. +> trunk5 stable5
#: viewer/viewer_p.cpp:2390
#, kde-format
msgid "Print Document"
msgstr ""
#. +> trunk5 stable5
#: viewer/viewer_p.cpp:2441
#, kde-format
msgid "Attachments:"
msgstr ""
#. +> trunk5 stable5
#: viewer/viewer_p.cpp:2770
#, kde-format
msgid "URL copied to clipboard."
msgstr ""
#. +> trunk5 stable5
-#: viewer/viewer_p.cpp:2911
+#: viewer/viewer_p.cpp:2913
#, kde-format
msgid "Message loading failed: %1."
msgstr ""
#. +> trunk5 stable5
-#: viewer/viewer_p.cpp:2916
+#: viewer/viewer_p.cpp:2918
#, kde-format
msgid "Message not found."
msgstr ""
#. +> trunk5 stable5
#: widgets/attachmentdialog.cpp:37
#, kde-kuit-format
msgctxt "@info"
msgid ""
"Open attachment <filename>%1</filename>?<nl/>"
"Note that opening an attachment may compromise your system's security."
msgstr ""
#. +> trunk5 stable5
#: widgets/attachmentdialog.cpp:43
#, kde-format
msgid "Open Attachment?"
msgstr ""
#. +> trunk5 stable5
#: widgets/attachmentdialog.cpp:54
#, kde-format
msgid "&Open With '%1'"
msgstr ""
#. +> trunk5 stable5
#: widgets/attachmentdialog.cpp:63
#, kde-format
msgid "&Open With..."
msgstr ""
#. +> trunk5 stable5
#: widgets/attachmentdialog.cpp:85
#, kde-format
msgid "Do not ask again"
msgstr ""
#. +> trunk5 stable5
#: widgets/htmlstatusbar.cpp:129
#, kde-format
msgctxt "'HTML Message' with html linebreaks between each letter and in bold text."
msgid ""
"<qt><b><br />"
"H<br />"
"T<br />"
"M<br />"
"L<br />"
" <br />"
"M<br />"
"e<br />"
"s<br />"
"s<br />"
"a<br />"
"g<br />"
"e</b></qt>"
msgstr ""
#. +> trunk5 stable5
#: widgets/htmlstatusbar.cpp:133
#, kde-format
msgctxt "'No HTML Message' with html linebreaks between each letter."
msgid ""
"<qt><br />"
"N<br />"
"o<br />"
" <br />"
"H<br />"
"T<br />"
"M<br />"
"L<br />"
" <br />"
"M<br />"
"e<br />"
"s<br />"
"s<br />"
"a<br />"
"g<br />"
"e</qt>"
msgstr ""
#. +> trunk5 stable5
#: widgets/htmlstatusbar.cpp:138
#, kde-format
msgctxt "'Plain Message' with html linebreaks between each letter."
msgid ""
"<qt><br />"
"P<br />"
"l<br />"
"a<br />"
"i<br />"
"n<br />"
" <br />"
"M<br />"
"e<br />"
"s<br />"
"s<br />"
"a<br />"
"g<br />"
"e<br />"
"</qt>"
msgstr ""
#. +> trunk5 stable5
#: widgets/htmlstatusbar.cpp:142
#, kde-format
msgctxt "'Calendar Message' with html linebreaks between each letter."
msgid ""
"<qt><br />"
"C<br />"
"a<br />"
"l<br />"
"e<br />"
"n<br />"
"d<br />"
"a<br />"
"r<br />"
" <br />"
"M<br />"
"e<br />"
"s<br />"
"s<br />"
"a<br />"
"g<br />"
"e<br />"
"</qt>"
msgstr ""
#. +> trunk5 stable5
#: widgets/htmlstatusbar.cpp:156
#, kde-format
msgid "Click to toggle between HTML, plain text and calendar."
msgstr ""
#. +> trunk5 stable5
#: widgets/invitationsettings.cpp:108
#, kde-format
msgid ""
"<qt>Invitations are normally sent as attachments to a mail. This switch changes the invitation mails to be sent in the text of the mail instead; this is necessary to send invitations and replies to Microsoft Outlook.<br />"
"But, when you do this, you no longer get descriptive text that mail programs can read; so, to people who have email programs that do not understand the invitations, the resulting messages look very odd.<br />"
"People that have email programs that do understand invitations will still be able to work with this.</qt>"
msgstr ""
#. +> trunk5 stable5
#: widgets/mailsourcewebengineviewer.cpp:64
#, kde-format
msgctxt "Unchanged mail message"
msgid "Raw Source"
msgstr ""
#. +> trunk5 stable5
#: widgets/mailsourcewebengineviewer.cpp:67
#, kde-format
msgid "Raw, unmodified mail as it is stored on the filesystem or on the server"
msgstr ""
#. +> trunk5 stable5
#: widgets/mailsourcewebengineviewer.cpp:70
#, kde-format
msgctxt "Mail message as shown, in HTML format"
msgid "HTML Source"
msgstr ""
#. +> trunk5 stable5
#: widgets/mailsourcewebengineviewer.cpp:71
#, kde-format
msgid "HTML code for displaying the message to the user"
msgstr ""
#. +> trunk5 stable5
#: widgets/mailtrackingwarningwidget.cpp:33
#, kde-format
msgid "Some Mail Tracker was found and was blocked.<a href=\"mailtrackingdetails\">(Details...)"
msgstr ""
#. +> trunk5 stable5
#: widgets/mailtrackingwarningwidget.cpp:60
#, kde-format
msgid "1 tracker from the company %2 (%3)"
msgid_plural "%1 trackers from the company %2 (%3)"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: widgets/openattachmentfolderwidget.cpp:48
#, kde-format
msgid "Open folder where attachment was saved"
msgstr ""
#. +> trunk5 stable5
#: widgets/submittedformwarningwidget.cpp:34
#, kde-format
msgid "Submit form is not allowed in mailer. Please open url in a browser."