msgid "Konfigurator is &krusader;s configuration center. When running &krusader;, use <menuchoice> <guimenu>Settings</guimenu> <guimenuitem>Configure &krusader;</guimenuitem> </menuchoice>, and it will start Konfigurator. There you can modify the way &krusader; works and customize it to your own needs. At any time, pressing the <guibutton>Apply</guibutton> button applies the changes, pressing <guibutton>Close</guibutton> closes Konfigurator, and pressing <guibutton>Defaults</guibutton> re-applies &krusader;'s \"factory\" settings. Konfigurator is divided into pages, each containing items related to that page. For some changes to the &GUI;, you have to close and restart &krusader;."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:45
#, no-c-format
msgid "Since &krusader;-1.80.0 the <link linkend=\"key_bindings\">Key-Bindings</link> and <link linkend=\"mainwindow\">Main Toolbar</link>-<link linkend=\"actions_toolbar\">Actions Toolbar</link> have received their own configuration windows and so they are not a part anymore of Konfigurator, you can configure them now via the <link linkend=\"settings-menu\"><guimenu>Settings</guimenu> menu</link>."
msgstr ""
#. Tag: title
#. +> trunk5
#: konfigurator.docbook:51
#, no-c-format
msgid "Startup"
msgstr ""
#. Tag: title
#. +> trunk5
#: konfigurator.docbook:53
#, no-c-format
msgid "<title>Startup configuration</title>"
msgstr ""
#. Tag: phrase
#. +> trunk5
#: konfigurator.docbook:59
#, no-c-format
msgid "<phrase>Startup configuration</phrase>"
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:63
#, no-c-format
msgid "The startup page determines the way that &krusader; looks (and works) when it is launched. It is divided into two main parts:"
msgid "<guilabel>Startup Profile</guilabel>: Starts the selected <link linkend=\"panel_profiles\">Panel profile</link> at startup. <guilabel><Last session></guilabel> is a special Panel Profile, it is saved automatically when closing &krusader;."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:85
#, no-c-format
msgid "<guilabel>Show splashscreen</guilabel>: Displays a splash screen when starting &krusader;."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:91
#, no-c-format
msgid "<guilabel>Single Instance Mode</guilabel>: Allows only one &krusader; instance to run."
msgstr ""
#. Tag: guilabel
#. +> trunk5
#: konfigurator.docbook:100
#, no-c-format
msgid "User Interface"
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:103
#, no-c-format
msgid "Determines which parts of the user interface are visible after start-up."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:107
#, no-c-format
msgid "<guilabel>Save last position, size and panel settings</guilabel>: When launched, &krusader; resizes itself to the size it was when last shut-down. &krusader; also appears in the same location on the screen, having panels sorted and aligned as they were. If this option is unchecked, you can use the menu <menuchoice> <guimenu>Window</guimenu> <guimenuitem>Save Position</guimenuitem> </menuchoice> option to manually set &krusader; size and position at start-up."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:124
#, no-c-format
msgid "<guilabel>Update default panel settings</guilabel>: If checked, the default panel settings will be updated after start-up."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:130
#, no-c-format
msgid "<guilabel>Start to tray</guilabel>: if checked, &krusader; starts to tray (if minimize to tray is set), without showing the main window."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:136
#, no-c-format
msgid "<guilabel>Save component settings on exit</guilabel>: If checked, restores the user interface components to their condition when last shut-down."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:142
#, no-c-format
msgid "<guilabel>Show function keys</guilabel>: If checked, the <link linkend=\"fnkeys\">FN Keys Bar</link> is visible after start-up."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:148
#, no-c-format
msgid "<guilabel>Show statusbar</guilabel>: If checked, the <link linkend=\"mainwindow\">Statusbar</link> is visible after start-up. Available only if the <guilabel>Save component settings on exit</guilabel> item is unchecked."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:154
#, no-c-format
msgid "<guilabel>Show command line</guilabel>: If checked, the <link linkend=\"cmdline\">Command Line</link> is visible after start-up. Available only if the <guilabel>Save component settings on exit</guilabel> item is unchecked."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:160
#, no-c-format
msgid "<guilabel>Show embedded terminal</guilabel>: If checked, the <link linkend=\"termemu\">Terminal emulator</link> is visible after start-up. Available only if the <guilabel>Save component settings on exit</guilabel> item is unchecked."
msgstr ""
#. Tag: title
#. +> trunk5
#: konfigurator.docbook:171
#, no-c-format
msgid "Panel"
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:172
#, no-c-format
msgid "Here you can determine the look and feel of panel - which means finetuning the application to your needs. The page is divided into six tabs: <guilabel>General</guilabel>, <guilabel>View</guilabel>, <guilabel>Buttons</guilabel>, <guilabel>Selection Mode</guilabel>, <guilabel>Media Menu</guilabel>, and <guilabel>Layout</guilabel>:"
msgid "<guilabel>Edit Mode by default</guilabel>: If checked, show editable path in Navigator bar by default."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:193
#, no-c-format
msgid "<guilabel>Show full path by default</guilabel>: If checked, always show full path in Navigator bar by default."
msgstr ""
#. Tag: guilabel
#. +> trunk5
#: konfigurator.docbook:199
#, no-c-format
msgid "Operation"
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:202
#, no-c-format
msgid "<guilabel>Autoselect Directories</guilabel>: When <link linkend=\"edit-menu\">you select a group of files</link> (either by using <guilabel>Select Group</guilabel> or by using <guilabel>Select All</guilabel>), &krusader; checks this option. If checked, the directories matching the select criteria are also selected. Otherwise, only files are selected."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:211
#, no-c-format
msgid "<guilabel>Rename selects extension</guilabel>: When <link linkend=\"renaming\">you rename a file</link>, the whole text is selected. If you want total commanderlike renaming of just the name, without extension, deselect this item."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:219
#, no-c-format
msgid "<guilabel>Unselect files before copy/move</guilabel>: If checked, &krusader; remove the selection marks from files or folders before <link linkend=\"copying\">copying or moving</link> them to the new location."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:226
#, no-c-format
msgid "<guilabel>Filter dialog remembers settings</guilabel>: If checked, the filter dialog will be opened with the last filter settings that where applied to the panel."
msgstr ""
#. Tag: guilabel
#. +> trunk5
#: konfigurator.docbook:234
#, no-c-format
msgid "Tabs"
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:237
#, no-c-format
msgid "<guilabel>Use fullpath tab names</guilabel>: If checked, display the full path in the <link linkend=\"folder-tabs\">Folder tabs</link>; otherwise only the last part of the path is displayed."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:244
#, no-c-format
msgid "<guilabel>Show new/close tab buttons</guilabel>: If checked, &krusader; displays new and close buttons on <link linkend=\"folder-tabs\">tabs</link>."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:249
#, no-c-format
msgid "<guilabel>Tab Bar position</guilabel>: Lets you choose <link linkend=\"folder-tabs\">Tab bar</link> position (<guimenuitem>Bottom</guimenuitem> or <guimenuitem>Top</guimenuitem>)."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:253
#, no-c-format
msgid "<guilabel>Show Tab Bar on single tab</guilabel>: If checked, &krusader; displays the Tab Bar even if there is only one <link linkend=\"folder-tabs\">tab</link> on the panel."
msgstr ""
#. Tag: guilabel
#. +> trunk5
#: konfigurator.docbook:260
#, no-c-format
msgid "Search bar"
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:263
#, no-c-format
msgid "<guilabel>Start by typing</guilabel>: allows to select if <link linkend=\"quicksearch\">quick search</link> feature is used. When checked, you can open search bar and start searching by typing something while viewing folder contents in the active panel."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:270
#, no-c-format
msgid "<guilabel>Case sensitive</guilabel>: When you use the <link linkend=\"quicksearch\">search</link> or <link linkend=\"quickfilter\">filter</link> feature: If checked (the &UNIX; default), all files beginning with capital letters appear before files beginning with lower case letters; otherwise, all files beginning with a specified letter (capital or otherwise) will be displayed together."
-msgid "<guilabel>Directory navigation with Right Arrow</guilabel>: I checked, pressing the <keycap>Right arrow</keycap> key enters directory if no search text editing intention is captured."
+msgid "<guilabel>Directory navigation with Right Arrow</guilabel>: If checked, pressing the <keycap>Right arrow</keycap> key enters directory if no search text editing intention is captured."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:290
#, no-c-format
msgid "<guilabel>Position</guilabel>: Lets you choose <link linkend=\"quicksearch\">search</link> and <link linkend=\"quickfilter\">filter</link> bar position (<guimenuitem>Bottom</guimenuitem> or <guimenuitem>Top</guimenuitem>)."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:295
#, no-c-format
msgid "<guilabel>Default mode</guilabel>: Lets you choose the search bar default mode between <link linkend=\"quicksearch\">Search</link>, <guilabel>Select</guilabel> and <link linkend=\"quickfilter\">Filter</link>. You can change the mode later using the search bar itself."
msgstr ""
#. Tag: guilabel
#. +> trunk5
#: konfigurator.docbook:302
#, no-c-format
msgid "Status/Totalsbar"
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:305
#, no-c-format
msgid "<guilabel>Show size in bytes too</guilabel>: If checked, &krusader; displays size in bytes on statusbar or totalsbar."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:310
#, no-c-format
msgid "<guilabel>Show space information</guilabel>: If checked, &krusader; displays free/total disk space in the Status-/Totalsbar."
msgstr ""
#. Tag: title
#. +> trunk5
#: konfigurator.docbook:317
#, no-c-format
msgid "View"
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:323
#, no-c-format
msgid "<guilabel>View font</guilabel>: Allows you to change the font used inside the file lists."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:328
#, no-c-format
msgid "<guilabel>Tooltip delay (msec)</guilabel>: Allows you to configure the delay in milliseconds between the moment you have stopped mouse pointer above an item in a file list and the moment when the tooltip will be shown."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:333
#, no-c-format
msgid "<guilabel>Use human readable file size</guilabel>: If checked, the file size appears in kB, Mb &etc;, and not in bytes (default)."
msgid "<guilabel>Show hidden files</guilabel>: If checked, &krusader; displays the \"dot-files\" which are otherwise hidden."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:351
#, no-c-format
msgid "<guilabel>Load the user defined folder icons</guilabel>: If checked, &krusader; loads the user defined folder icons."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:356
#, no-c-format
msgid "<guilabel>Always show current item</guilabel>: If checked, &krusader; shows current item border decoration in inactive panel."
msgstr ""
#. Tag: guilabel
#. +> trunk5
#: konfigurator.docbook:362
#, no-c-format
msgid "Sort method"
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:365
#, no-c-format
msgid "<guilabel>Krusader (default)</guilabel>: the comparison used so far. Uses comparison using locale rules (even context rules)."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:371
#, no-c-format
msgid "<guilabel>Alphabetical</guilabel>: strings are compared character by character (no context rules from locale applied). Alphabet characters are compared using locale rules, special characters are compared by the character code."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:379
#, no-c-format
msgid "<guilabel>Alphabetical and numbers</guilabel>: the same as above, but if the names contains numbers, the numbers are compared numerically instead of alphabetically."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:386
#, no-c-format
msgid "<guilabel>Character code</guilabel>: comparison by character code (quick)."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:392
#, no-c-format
msgid "<guilabel>Character code and numbers</guilabel>: the same as above, but with numerical comparison of numbers."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:401
#, no-c-format
msgid "<guilabel>Case sensitive sorting</guilabel>: If checked (the &UNIX; default), all files beginning with capital letters appear before files beginning with non-capital letters; otherwise, all files beginning with a specified letter (capital or otherwise) appear together."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:410
#, no-c-format
msgid "<guilabel>Always sort dirs by name</guilabel>: Sorts directories by name, regardless of the sort column."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:416
#, no-c-format
msgid "<guilabel>Show directories first</guilabel>: If checked directories have precedence in folder lists."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:421
#, no-c-format
msgid "<guilabel>Locale aware sorting</guilabel>: Sorts files and directories according to the current locale settings."
msgstr ""
#. Tag: guilabel
#. +> trunk5
#: konfigurator.docbook:428
#, no-c-format
msgid "View modes"
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:431
#, no-c-format
msgid "<guilabel>Default view mode</guilabel>: Allows you to change the default view mode. You can choose <guimenuitem>Detailed View</guimenuitem> or <guimenuitem>Brief View</guimenuitem>. On tabs of both view modes you can define the following options."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:436
#, no-c-format
msgid "<guilabel>Default icon size</guilabel>: Allows you to change the size of the icons in the file lists. The available sizes are 16x16, 22x22, 32x32 and 48x48 pixels."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:443
#, no-c-format
msgid "<guilabel>Use icons in the filenames</guilabel>: If checked, show the icons in file names and folders."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:448
#, no-c-format
msgid "<guilabel>Show previews by default</guilabel>: If checked, show the previews of file contents."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:453
#, no-c-format
msgid "To configure the columns use the right click menu in the panel when viewing files. The left and right panel use their own columns independently. The following columns are available:"
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:458
#, no-c-format
msgid "<guilabel>Name</guilabel>: Shows the filename without the part after the last dot, this latter part is displayed in the <guilabel>Ext</guilabel> column. When the <guilabel>Ext</guilabel> column is made hidden, the complete filename is shown in the <guilabel>Name</guilabel> column like ⪚ &konqueror; does."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:465
#, no-c-format
msgid "<guilabel>Ext</guilabel>: Shows the last part of the filename (the part after the last dot) in the <guilabel>Ext</guilabel> column, and not as a complete filename in the <guilabel>Name</guilabel> column like ⪚ &konqueror; does."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:473
#, no-c-format
msgid "<guilabel>Type</guilabel>: Shows the MIME type field."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:478
#, no-c-format
msgid "<guilabel>Size</guilabel>: Shows the size field."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:483
#, no-c-format
msgid "<guilabel>Modified</guilabel>: Shows the modified date and time field."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:488
#, no-c-format
msgid "<guilabel>Perms</guilabel>: Shows the full permissions ⪚ \"rwxr-xr-x\" or as octal numbers '0755' instead with enable/disable <guilabel>Numeric Permissions</guilabel> in <guilabel>Panel</guilabel> <guilabel>View</guilabel> Tab."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:497
#, no-c-format
msgid "<guilabel>rwx</guilabel>: Shows only the rights of the current user ⪚ \"-rw\"."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:502
#, no-c-format
msgid "<guilabel>Owner</guilabel>: Shows the owner field."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:507
#, no-c-format
msgid "<guilabel>Group</guilabel>: Shows the group field."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:515
#, no-c-format
msgid "Uncheck the columns not in use. This allows more space for columns in use."
msgstr ""
#. Tag: title
#. +> trunk5
#: konfigurator.docbook:520
#, no-c-format
msgid "Buttons"
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:521
#, no-c-format
msgid "<guilabel>Toolbar buttons have icons</guilabel>: If checked, &krusader; displays icons on toolbar buttons."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:524
#, no-c-format
msgid "<guilabel>Show Media Button</guilabel>: If checked, &krusader; displays media button."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:527
#, no-c-format
msgid "<guilabel>Show Back Button</guilabel>: If checked, &krusader; displays back button."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:530
#, no-c-format
msgid "<guilabel>Show Forward Button</guilabel>: If checked, &krusader; displays forward button."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:533
#, no-c-format
msgid "<guilabel>Show History Button</guilabel>: If checked, &krusader; displays history button."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:536
#, no-c-format
msgid "<guilabel>Show Bookmarks Button</guilabel>: If checked, &krusader; displays bookmarks button."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:539
#, no-c-format
msgid "<guilabel>Show Panel Toolbar</guilabel>: If checked, &krusader; displays the Panel Toolbar."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:542
#, no-c-format
msgid "You can make the buttons on the <guilabel>Panel Toolbar</guilabel> visible or hidden:"
msgstr ""
#. Tag: guilabel
#. +> trunk5
#: konfigurator.docbook:546
#, no-c-format
msgid "Visible Panel Toolbar buttons"
msgstr ""
#. Tag: guilabel
#. +> trunk5
#: konfigurator.docbook:555
#, no-c-format
msgid "Equal button (=)"
msgstr ""
#. Tag: guilabel
#. +> trunk5
#: konfigurator.docbook:559
#, no-c-format
msgid "Up button (..)"
msgstr ""
#. Tag: guilabel
#. +> trunk5
#: konfigurator.docbook:563
#, no-c-format
msgid "Home button (~)"
msgstr ""
#. Tag: guilabel
#. +> trunk5
#: konfigurator.docbook:567
#, no-c-format
msgid "Root button (/)"
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:570
#, no-c-format
msgid "<guilabel>Toggle-button for sync-browsing</guilabel>: If checked, shows the <link linkend=\"panel_toolbar\">Sync-browsing</link> button."
msgstr ""
#. Tag: title
#. +> trunk5
#: konfigurator.docbook:578
#, no-c-format
msgid "Selection Mode"
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:579
#, no-c-format
msgid "Here you can configure the selection modes."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:585
#, no-c-format
msgid "<guilabel>&krusader; Mode</guilabel>: The way &krusader; has worked from day one. Both mouse keys allow selecting files. To select more than one file, hold the &Ctrl; key and click the &LMB;. Right-click menu appears with a short click on the &RMB;."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:594
#, no-c-format
msgid "<guilabel>Konqueror Mode</guilabel>: pressing the &LMB; selects files -- you can click and select multiple files. Right-click menu appears with a short click on the &RMB;."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:603
#, no-c-format
msgid "<guilabel>Total commander Mode</guilabel>: Pressing the &RMB; selects multiple files and the right-click menu appears with <guilabel>pressing and holding</guilabel> the &RMB;. The Left Mouse Button does not select, but sets the current file without affecting the current selection."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:614
#, no-c-format
msgid "<guilabel>Ergonomic Mode</guilabel>: The &LMB; does not select, but sets the current file without affecting the current selection. The &RMB; invokes the context-menu. You can select with &Ctrl; key and the left button."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:620
#, no-c-format
msgid "<guilabel>Custom Selection Mode</guilabel>: Create your own selection style!"
msgstr ""
#. Tag: guilabel
#. +> trunk5
#: konfigurator.docbook:627
#, no-c-format
msgid "Details"
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:630
#, no-c-format
msgid "<guilabel>Double-click selects (classic)</guilabel>: A single click on a file will select and focus, a double click opens the file or steps into the directory."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:636
#, no-c-format
msgid "<guilabel>Obey global selection policy</guilabel>: Pressing the &LMB; selects files -- Use global setting: &plasma; System Settings -> Input Devices -> Mouse."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:644
#, no-c-format
msgid "Custom Selection Mode items:"
msgstr ""
#. Tag: guilabel
#. +> trunk5
#: konfigurator.docbook:648
#, no-c-format
msgid "Based on &plasma;'s selection mode"
msgstr ""
#. Tag: guilabel
#. +> trunk5
#: konfigurator.docbook:653
#, no-c-format
msgid "Left mouse button selects"
msgstr ""
#. Tag: guilabel
#. +> trunk5
#: konfigurator.docbook:658
#, no-c-format
msgid "Left mouse button preserves selection"
msgstr ""
#. Tag: guilabel
#. +> trunk5
#: konfigurator.docbook:664
#, no-c-format
msgid "&Shift;/&Ctrl;-Left mouse button selects"
msgstr ""
#. Tag: guilabel
#. +> trunk5
#: konfigurator.docbook:670
#, no-c-format
msgid "Right mouse button selects"
msgstr ""
#. Tag: guilabel
#. +> trunk5
#: konfigurator.docbook:675
#, no-c-format
msgid "Right mouse button preserves selection"
msgstr ""
#. Tag: guilabel
#. +> trunk5
#: konfigurator.docbook:681
#, no-c-format
msgid "&Shift;/&Ctrl;-Right mouse button selects"
msgstr ""
#. Tag: guilabel
#. +> trunk5
#: konfigurator.docbook:687
#, no-c-format
msgid "Spacebar moves down"
msgstr ""
#. Tag: guilabel
#. +> trunk5
#: konfigurator.docbook:692
#, no-c-format
msgid "Insert moves down"
msgstr ""
#. Tag: guilabel
#. +> trunk5
#: konfigurator.docbook:697
#, no-c-format
msgid "Right-clicking pops context menu immediately"
msgstr ""
#. Tag: title
#. +> trunk5
#: konfigurator.docbook:706
#, no-c-format
msgid "Media Menu"
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:707
#, no-c-format
msgid "Using this tab you can select the <link linkend=\"media_button\">Media button</link> menu contents:"
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:710
#, no-c-format
msgid "<guilabel>Show Mount Path</guilabel>: show the mount path of partition if checked."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:714
#, no-c-format
msgid "<guilabel>Show File System Type</guilabel>: show the file system type of partition if checked."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:718
#, no-c-format
msgid "<guilabel>Show Size:</guilabel> allows selection of the size representation in media menu. Can be <guimenuitem>Always</guimenuitem> (default, always show the size of partition), <guimenuitem>When Device has no Label</guimenuitem> (show the size for partitions with no label only) or <guimenuitem>Never</guimenuitem> (never show the size in media menu)."
msgstr ""
#. Tag: title
#. +> trunk5
#: konfigurator.docbook:724
#, no-c-format
msgid "Layout"
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:725
#, no-c-format
msgid "You can choose the layout and frame settings:"
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:728
#, no-c-format
msgid "<guilabel>Layout:</guilabel> allows to define layout. The default options are <guimenuitem>Default</guimenuitem>, <guimenuitem>Compact</guimenuitem>, and <guimenuitem>Classic</guimenuitem>."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:732
#, no-c-format
msgid "<guilabel>Frame Color:</guilabel> defines frame color. Can be <guimenuitem>Defined by Layout</guimenuitem>, <guimenuitem>None</guimenuitem>, or <guimenuitem>Statusbar</guimenuitem>."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:736
#, no-c-format
msgid "<guilabel>Frame Shape:</guilabel> defines frame color. Can be <guimenuitem>Defined by Layout</guimenuitem>, <guimenuitem>None</guimenuitem>, or <guimenuitem>Statusbar</guimenuitem>."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:740
#, no-c-format
msgid "<guilabel>Frame Shadow:</guilabel> defines frame color. Can be <guimenuitem>Defined by Layout</guimenuitem>, <guimenuitem>None</guimenuitem>, or <guimenuitem>Statusbar</guimenuitem>."
msgstr ""
#. Tag: title
#. +> trunk5
#: konfigurator.docbook:747
#, no-c-format
msgid "<title>Colors</title>"
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:748
#, no-c-format
msgid "This page configures the colors of the <link linkend=\"list_panel\">List Panel</link> and the <link linkend=\"synchronizer\">Synchronizer</link> (disabled at the compilation time by default). The <guilabel>KDE default colors</guilabel> is the default color configuration."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:762
#, no-c-format
msgid "<guilabel>Use the default KDE colors</guilabel>: this is the default, it uses &plasma; color defined in the &systemsettings;."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:768
#, no-c-format
msgid "<guilabel>Use Alternate Background color</guilabel>: If checked, the <guilabel>Background</guilabel> color and the <guilabel>Alternate background</guilabel> color alternates line by line. When you do not use the &plasma; default colors, you can configure the alternate colors in the <guilabel>Colors</guilabel> box."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:779
#, no-c-format
msgid "<guilabel>Show current item even if not focused</guilabel>: If checked, shows the last cursor position in the non active list panel. This option is only available when you do not use the &plasma; default colors."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:787
#, no-c-format
msgid "<guilabel>Dim the colors of the inactive panel</guilabel>: If checked, the colors of the inactive panel are dimmed. These settings can be configured in the <guilabel>Inactive</guilabel> tab of the <guilabel>Colors</guilabel> box. This option is only available when you do not use the &plasma; default colors."
msgstr ""
#. Tag: guilabel
#. +> trunk5
#: konfigurator.docbook:802
#, no-c-format
msgid "<guilabel>Colors</guilabel>"
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:805
#, no-c-format
msgid "Configure the colors the way you like, you can see the result in the <guilabel>Preview</guilabel> section. The following items of the active and inactive panel can be configured:"
msgstr ""
#. Tag: guilabel
#. +> trunk5
#: konfigurator.docbook:813
#, no-c-format
msgid "Foreground"
msgstr ""
#. Tag: guilabel
#. +> trunk5
#: konfigurator.docbook:818
#, no-c-format
msgid "Directory foreground"
msgstr ""
#. Tag: guilabel
#. +> trunk5
#: konfigurator.docbook:823
#, no-c-format
msgid "Executable foreground"
msgstr ""
#. Tag: guilabel
#. +> trunk5
#: konfigurator.docbook:828
#, no-c-format
msgid "Symbolic link foreground"
msgstr ""
#. Tag: guilabel
#. +> trunk5
#: konfigurator.docbook:833
#, no-c-format
msgid "Invalid symlink foreground"
msgstr ""
#. Tag: guilabel
#. +> trunk5
#: konfigurator.docbook:838
#, no-c-format
msgid "Background"
msgstr ""
#. Tag: guilabel
#. +> trunk5
#: konfigurator.docbook:843
#, no-c-format
msgid "Alternate background"
msgstr ""
#. Tag: guilabel
#. +> trunk5
#: konfigurator.docbook:848
#, no-c-format
msgid "Selected foreground"
msgstr ""
#. Tag: guilabel
#. +> trunk5
#: konfigurator.docbook:853
#, no-c-format
msgid "Selected background"
msgstr ""
#. Tag: guilabel
#. +> trunk5
#: konfigurator.docbook:858
#, no-c-format
msgid "Alternate selected background"
msgstr ""
#. Tag: guilabel
#. +> trunk5
#: konfigurator.docbook:863
#, no-c-format
msgid "Current foreground"
msgstr ""
#. Tag: guilabel
#. +> trunk5
#: konfigurator.docbook:868
#, no-c-format
msgid "Selected current foreground"
msgstr ""
#. Tag: guilabel
#. +> trunk5
#: konfigurator.docbook:873
#, no-c-format
msgid "Current background"
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:877
#, no-c-format
msgid "The following items of the <link linkend=\"synchronizer\">Synchronizer</link> (disabled at the compilation time by default) can be configured:"
msgid "Here you see a preview of the configured colors."
msgstr ""
#. Tag: guilabel
#. +> trunk5
#: konfigurator.docbook:944
#, no-c-format
msgid "Color schemes"
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:947
#, no-c-format
msgid "With the <guibutton>Import Color Scheme</guibutton> and <guibutton>Export Color Scheme</guibutton> buttons you can load and save a Color Scheme profile. This allows &krusader; to use <trademark class=\"copyright\">Total Commander</trademark>, <application>Midnight Commander</application>, foo-commander or your own custom color profile. The Color Schemes are stored in <filename>/usr/share/krusader</filename>, the <filename>foo.color</filename> is a binary file that holds the color scheme."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:958
#, no-c-format
msgid "<application>Midnight Commander</application> and <trademark class=\"copyright\">Total Commander</trademark> Color scheme files are provided. Please <link linkend=\"help_krusader\">upload your favorite Color schemes</link> so that they become available for the &krusader; community. Thanks!"
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:970
#, no-c-format
msgid "Here you configure the basic operations. The page is divided into three tabs: <guilabel>General</guilabel>, <guilabel>Viewer/Editor</guilabel>, and <guilabel>Atomic extensions</guilabel>."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:976
#, no-c-format
msgid "The following options determine basic aspects of operation:"
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:979
#, no-c-format
msgid "<guilabel>Warn on exit</guilabel>: if checked, &krusader; warns you every time when exit action is triggered."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:985
#, no-c-format
msgid "<guilabel>Minimize to tray</guilabel>: If checked, the &krusader; icon will appear in the system tray. When you minimize &krusader;, it will not appear in the taskbar. It also will not exit if you close the main window. Instead you can quit &krusader; by selecting <guimenuitem>Quit</guimenuitem> from the <guimenu>File</guimenu> menu or the context menu of the tray icon."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:995
#, no-c-format
msgid "<guilabel>Use MIME type magic</guilabel>: MIME type magic is a mechanism which allows &krusader; to inspect the files in the panels and determine their type even if the file has no identifying extension. For example, if you take an image file - <filename>image1.jpg</filename> - and rename it to <filename>image1</filename>, &krusader; will still know it is an image file and work with it accordingly. However, this mode of operation is slower (while refreshing the panel, or changing directories), so try &krusader; with and without MIME type magic and decide what is best for you."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:1009
#, no-c-format
msgid "<guilabel>Temp Directory</guilabel>: this option selects the base directory for &krusader;'s temporary files. The actual files will be created in separate directories under the 'Temp directory', so that each user running &krusader; will have their own temporary subdirectories under the chosen directory."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:1017
#, no-c-format
msgid "You must choose a temporary directory to which all users running &krusader; have full permissions!"
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:1024
#, no-c-format
msgid "<guilabel>Delete mode</guilabel> (<guilabel>Delete files/Move to trash</guilabel>): when &krusader; deletes files it can either <emphasis>really</emphasis> delete them or move them to the trash folder, thereby making them available via &plasma;'s trash."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:1030
#, no-c-format
msgid "<guilabel>External Terminal</guilabel>: choose which terminal emulator will be used when &krusader; opens a console window (via <keycap>F9</keycap>, or <menuchoice><guimenu>Tools</guimenu> <guimenuitem>Start Terminal</guimenuitem></menuchoice> menu option)."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:1037
#, no-c-format
msgid "<guilabel>Embedded Terminal sends Chdir on panel change</guilabel>: if unchecked, there will be no <command>cd</command> command sent to the Terminal Emulator if the panel folder changes."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:1042
#, no-c-format
msgid "<guilabel>Toggle Fullscreen Embedded Terminal</guilabel>: if checked, &krusader; shows fullscreen terminal in <application>Midnight Commander</application> style (Terminal is shown instead of &krusader; window)."
msgstr ""
#. Tag: title
#. +> trunk5
#: konfigurator.docbook:1050
#, no-c-format
msgid "Viewer/Editor"
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:1051
#, no-c-format
msgid "Here you can change the viewer and editor settings:"
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:1055
#, no-c-format
msgid "<guilabel>Internal editor and viewer opens each file in separate window</guilabel>: check this item if you want each file to be opened in separate window."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:1061
#, no-c-format
msgid "<guilabel>Default viewer mode</guilabel>:"
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:1065
#, no-c-format
msgid "<guilabel>Generic mode</guilabel>: use the systems default viewer."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:1069
#, no-c-format
msgid "<guilabel>Text mode</guilabel>: view the file in text-only mode."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:1073
#, no-c-format
msgid "<guilabel>Hex mode</guilabel>: view the file in hex-only mode."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:1077
#, no-c-format
msgid "<guilabel>Lister mode</guilabel>: Fast text/hexadecimal viewer for huge filesizes. &krusader; lister never loads the whole file into memory, just a little part of it, and uses caching for faster scrolling. Remote files are downloaded, but during the download, viewing the downloaded part is possible. If a file constantly changes, then it can also be viewed, lister will always see its current state."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:1084
#, no-c-format
msgid "<guilabel>Use lister if the text file is bigger than: 10 MB (default value)</guilabel>: checks whether a text file is bigger than 10 MB (configurable), and if yes, then &krusader; Lister is used instead of &plasma;'s default viewer."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:1090
#, no-c-format
msgid "<guilabel>Use Okteta as Hex viewer</guilabel>: if checked (default option), use &plasma; hex editor <ulink url=\"http://docs.kde.org/stable/en/kdesdk/okteta/index.html\">Okteta</ulink> to view raw data. To use this option you should install <application>Okteta</application> package first."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:1099
#, no-c-format
msgid "<guilabel>Editor</guilabel>: choose what editor will be used when editing a file (via <keycap>F4</keycap>). Default the internal viewer is used, this is the &plasma;'s default viewer."
msgstr ""
#. Tag: title
#. +> trunk5
#: konfigurator.docbook:1107
#, no-c-format
msgid "Atomic extensions"
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:1108
#, no-c-format
msgid "<guilabel>Atomic extensions</guilabel>: predefined atomic extensions like <literal role=\"extension\">.tar.gz</literal> are shown as one part in the <guilabel>Ext</guilabel> Column of the <link linkend=\"list_panel\">List Panel</link>."
msgstr ""
#. Tag: title
#. +> trunk5
#: konfigurator.docbook:1114
#, no-c-format
msgid "Advanced"
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:1115
#, no-c-format
msgid "This page handles more advanced issues, so you should double-check your actions here: modifying settings here"
msgstr ""
#. Tag: remark
#. +> trunk5
#: konfigurator.docbook:1117
#, no-c-format
msgid "makes &krusader; a more powerful and dangerous tool."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:1120
#, no-c-format
msgid "The page is divided into three parts:"
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:1138
#, no-c-format
msgid "<guilabel>Automount filesystems</guilabel>: this makes &krusader; try to mount a file system before entering it. For example, if you click on <filename class=\"directory\">/mnt/cdrom</filename> (and <filename class=\"directory\"> /mnt/cdrom</filename> appears in <filename class=\"directory\">/etc/fstab</filename> as a mount point), &krusader; will check if it is mounted. If not, it will try and mount it for you and then enter, so that you would see the contents of your cdrom. Note, however, that &krusader; will NOT unmount when exiting <filename class=\"directory\"> /mnt/cdrom</filename>."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:1166
#, no-c-format
msgid "<guilabel>MountMan will not (un)mount the following mount points</guilabel>: If you have file systems that you do not want to accidentally unmount (or mount) then enter a list of mount points separated by commas (⪚ <literal>/, /boot, /tmp</literal>) and <link linkend=\"mount-man\">MountMan</link> will not try to (un)mount them."
msgstr ""
#. Tag: guilabel
#. +> trunk5
#: konfigurator.docbook:1181
#, no-c-format
msgid "Confirmations"
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:1184
#, no-c-format
msgid "By checking the options in this section, &krusader; will ask for confirmation before doing a specific action; otherwise, the following actions will be done without warning:"
msgid "<guilabel>Icon Cache Size</guilabel>: &krusader; uses an icon cache, so it will not have to reload icons that have been used before. Of course, as the cache grows bigger, it can store more icons and further speed operations, but the memory footprint of &krusader; will become bigger."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:1221
#, no-c-format
msgid "<guilabel>Arguments of updatedb</guilabel>: sets additional arguments for <command>updatedb</command>, please read the manpages for more information."
msgstr ""
#. Tag: title
#. +> trunk5
#: konfigurator.docbook:1233
#, no-c-format
msgid "Archives"
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:1234
#, no-c-format
msgid "This page configures some aspects of archive handling in &krusader;."
msgstr ""
#. Tag: guilabel
#. +> trunk5
#: konfigurator.docbook:1240
#, no-c-format
msgid "krarc ioslave"
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:1243
#, no-c-format
msgid "<guilabel>Enable Write Support</guilabel>: this option allows you to enable writing files into an archive."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:1247
#, no-c-format
msgid "The down side is that if a power failure occurs during the process, the files that were moved might already be deleted, but not yet packed into the archive. Moving archives into themselves will delete them."
msgstr ""
#. Tag: guilabel
#. +> trunk5
#: konfigurator.docbook:1258
#, no-c-format
msgid "Archive handling"
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:1261
#, no-c-format
msgid "<guilabel>Browse Archives As Directories</guilabel>: if checked, &krusader; will handle the archives transparently and let you open them as folders; otherwise, &krusader; will attempt to invoke an application which opens archives of that type."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:1293
#, no-c-format
msgid "<guilabel>Test archives after packing</guilabel>: this option automatically runs a test on a newly packed archive. It is safer, but takes longer."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:1299
#, no-c-format
msgid "<guilabel>Test archives before unpacking</guilabel>: this option automatically runs a test before unpacking. Some corrupted archives might cause a crash; therefore, it is better to test archives before unpacking."
msgstr ""
#. Tag: title
#. +> trunk5
#: konfigurator.docbook:1311
#, no-c-format
msgid "Dependencies page"
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:1312
#, no-c-format
msgid "This page configures the full path of the external applications. It is even possible to configure the full path of &krusader;!"
msgstr ""
#. Tag: emphasis
#. +> trunk5
#: konfigurator.docbook:1316
#, no-c-format
msgid "General tab"
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:1318
#, no-c-format
msgid "Here you can configure the full path of the following external applications:"
msgid "By default &kompare; (part of the kdesdk package) is used as external diff utility but you can also use your favorite diff utility ⪚ <ulink url=\"http://furius.ca/xxdiff/\"><application>xxdiff</application></ulink> or <ulink url=\"http://kdiff3.sourceforge.net\"><application>KDiff3</application></ulink>, just fill in the full path and enjoy."
msgstr ""
#. Tag: emphasis
#. +> trunk5
#: konfigurator.docbook:1473
#, no-c-format
msgid "Packers tab"
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:1475
#, no-c-format
msgid "In the <guilabel>Packers</guilabel> tab you will see a list of archive formats. Some are filled and some are empty. The ones that are available (filled) are supported by &krusader;. For them, &krusader; will handle the archives transparently and let you open them as folders (provided you have checked the <guilabel>Browse Archives As Directories</guilabel> item in the <link linkend=\"konfig-archives\">Archives</link> section); otherwise, &krusader; will attempt to invoke an application which opens archives of that type. If a certain archive item is empty, it means that &krusader; could not find the appropriate executables in the configured path. The next archives are supported: ace, arj, bzip2, deb, gzip, iso, lha, lzma, rar, rpm, tar, xz, zip and 7z."
msgstr ""
#. Tag: entry
#. +> trunk5
#: konfigurator.docbook:1493
#, no-c-format
msgid "packer"
msgstr ""
#. Tag: replaceable
#. +> trunk5
#: konfigurator.docbook:1505
#, no-c-format
msgid "usr/bin/7z"
msgstr ""
#. Tag: replaceable
#. +> trunk5
#: konfigurator.docbook:1519
#, no-c-format
msgid "usr/bin/arj"
msgstr ""
#. Tag: replaceable
#. +> trunk5
#: konfigurator.docbook:1533
#, no-c-format
msgid "usr/bin/bzip2"
msgstr ""
#. Tag: replaceable
#. +> trunk5
#: konfigurator.docbook:1547
#, no-c-format
msgid "/bin/cpio"
msgstr ""
#. Tag: replaceable
#. +> trunk5
#: konfigurator.docbook:1561
#, no-c-format
msgid "/bin/dpkg"
msgstr ""
#. Tag: replaceable
#. +> trunk5
#: konfigurator.docbook:1575
#, no-c-format
msgid "/usr/bin/gzip"
msgstr ""
#. Tag: replaceable
#. +> trunk5
#: konfigurator.docbook:1589
#, no-c-format
msgid "/usr/bin/lha"
msgstr ""
#. Tag: replaceable
#. +> trunk5
#: konfigurator.docbook:1603
#, no-c-format
msgid "/usr/bin/lzma"
msgstr ""
#. Tag: replaceable
#. +> trunk5
#: konfigurator.docbook:1617
#, no-c-format
msgid "/usr/bin/rar"
msgstr ""
#. Tag: replaceable
#. +> trunk5
#: konfigurator.docbook:1631
#, no-c-format
msgid "/bin/tar"
msgstr ""
#. Tag: replaceable
#. +> trunk5
#: konfigurator.docbook:1645
#, no-c-format
msgid "/usr/bin/unace"
msgstr ""
#. Tag: replaceable
#. +> trunk5
#: konfigurator.docbook:1659
#, no-c-format
msgid "/usr/bin/unarj"
msgstr ""
#. Tag: replaceable
#. +> trunk5
#: konfigurator.docbook:1673
#, no-c-format
msgid "/usr/bin/unrar"
msgstr ""
#. Tag: replaceable
#. +> trunk5
#: konfigurator.docbook:1687
#, no-c-format
msgid "/usr/bin/unzip"
msgstr ""
#. Tag: replaceable
#. +> trunk5
#: konfigurator.docbook:1701
#, no-c-format
msgid "/usr/bin/zip"
msgstr ""
#. Tag: replaceable
#. +> trunk5
#: konfigurator.docbook:1715
#, no-c-format
msgid "/usr/bin/xz"
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:1724
#, no-c-format
msgid "&krusader; may not be compatible with ACE despite our best efforts. Unace uses closed source and contains additional lines that make Unace get into infinite loop if the stdin is redirected to somewhere else. It works in the same manner as 'su', where you cannot enter the password only from the stdin. &krusader; >= 1-51 emulates the command line environment to enable co-operation with Unace, but we have noticed that Unace always changes its output format from release to release, making co-operation almost impossible."
msgstr ""
#. Tag: emphasis
#. +> trunk5
#: konfigurator.docbook:1736
#, no-c-format
msgid "Checksum Utilities tab"
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:1738
#, no-c-format
msgid "Here you can configure the full path of the following external <link linkend=\"checksum\">Checksum Utilities</link>:"
msgid "Here you can configure the terminal for UserActions and the font for the output-collection. The default terminal is <command>konsole --noclose -e</command>. To set up, configure and manage your UserActions use ActionMan (<link linkend=\"useractions\">UserActions</link> &URL;)."
msgstr ""
#. Tag: title
#. +> trunk5
#: konfigurator.docbook:1967
#, no-c-format
msgid "Protocols"
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:1968
#, no-c-format
msgid "This page links the MIMEs to protocols. ⪚ protocol \"tar\" is linked to MIME \"application/x-tar\"."
msgstr ""
#. Tag: para
#. +> trunk5
#: konfigurator.docbook:1971
#, no-c-format
msgid "In the <guilabel>Links</guilabel> you will see ⪚"
msgid "Use the current layout set of launchers for this dock. This group provides launchers <b>synchronization</b> between different docks in the <b>same layout</b>"
msgid "Use the global set of launchers for this dock. This group provides launchers <b>synchronization</b> between different docks and between <b>different layouts</b>"
msgid "Import and load default layout on startup."
msgstr ""
#. +> trunk5
#: main.cpp:86
#, kde-format
msgctxt "command line"
msgid "Print available layouts"
msgstr ""
#. +> trunk5
#: main.cpp:87
#, kde-format
msgctxt "command line"
msgid "Load specific layout on startup."
msgstr ""
#. +> trunk5
#: main.cpp:87
#, kde-format
msgctxt "command line: load"
msgid "layout_name"
msgstr ""
#. +> trunk5
#: main.cpp:88
#, kde-format
msgctxt "command line"
msgid "Import and load a layout."
msgstr ""
#. +> trunk5 stable5
#: main.cpp:88 main.cpp:89
#, kde-format
msgctxt "command line: import"
msgid "file_name"
msgstr ""
#. +> trunk5
#: main.cpp:89
#, kde-format
msgctxt "command line"
msgid "Import full configuration."
msgstr ""
#. +> stable5
#: main.cpp:87
#, kde-format
msgctxt "command line"
msgid "Import configuration."
msgstr ""
#. +> trunk5
#: main.cpp:90
#, kde-format
msgctxt "command line"
msgid "Single layout memory mode. Only one layout is active at any case."
msgstr ""
#. +> trunk5
#: main.cpp:91
#, kde-format
msgctxt "command line"
msgid "Multiple layouts memory mode. Multiple layouts can be active at any time based on Activities running."
msgstr ""
#. +> stable5
#: main.cpp:84
#, kde-format
msgctxt "command line"
msgid "Show messages of debugging for the mask (Only useful to devs)."
msgstr ""
#. +> stable5
#: main.cpp:85
#, kde-format
msgctxt "command line"
msgid "Draw boxes around of the applets."
msgstr ""
#. +> stable5
#: main.cpp:86
#, kde-format
msgctxt "command line"
msgid "Open a window with much debug information."
msgstr ""
#. +> trunk5
#: main.cpp:127
#, kde-format
msgid "Available layouts that can be used to start Latte:"
msgstr ""
#. +> trunk5
#: main.cpp:133
#, kde-format
msgid "There are no available layouts, during startup Default will be used."
msgstr ""
#. +> trunk5
#: main.cpp:150
#, kde-format
msgctxt "layout missing"
msgid "This layout doesnt exist in the system."
msgstr ""
#. +> trunk5 stable5
#: main.cpp:175
#, kde-format
msgid "An instance is already running!, use --replace to restart Latte"
msgstr ""
#. +> trunk5 stable5
#: main.cpp:184
#, kde-format
msgid "The configuration cannot be imported"
msgstr ""
#. +> trunk5
#: main.cpp:194
#, kde-format
msgid "The layout cannot be imported"
msgstr ""
#. +> trunk5 stable5
#: main.cpp:247
#, kde-format
msgid ""
"Latte is a dock based on plasma frameworks that provides an elegant and intuitive experience for your tasks and plasmoids. It animates its contents by using parabolic zoom effect and tries to be there only when it is needed.\n"
"\n"
"\"Art in Coffee\""
msgstr ""
#. +> trunk5 stable5
#: main.cpp:264
#, kde-format
msgid "Logo and Icons"
msgstr ""
#. +> trunk5 stable5
#: main.cpp:266 main.cpp:268
#, kde-format
msgid "Many bug reports"
msgstr ""
#. +> trunk5 stable5
#: main.cpp:270
#, kde-format
msgid "Reviews for Latte Dock, CandilDock and NowDock"
msgstr ""
#. +> trunk5
#: packageplugins/shell/dockpackage.cpp:44
#, kde-format
msgid "Latte Dock defaults"
msgstr ""
#. +> trunk5 stable5
#: packageplugins/shell/dockpackage.cpp:45
#, kde-format
msgid "Latte Dock panel"
msgstr ""
#. +> trunk5 stable5
#: packageplugins/shell/dockpackage.cpp:47
#, kde-format
msgid "Dock configuration UI"
msgstr ""
#. +> trunk5
#: packageplugins/shell/dockpackage.cpp:48
#, kde-format
msgid "Dock secondary configuration UI"
msgstr ""
#. +> trunk5 stable5
#: packageplugins/shell/dockpackage.cpp:49
#, kde-format
msgid "Config model"
msgstr ""
#. +> trunk5 stable5
#: packageplugins/shell/dockpackage.cpp:50
#, kde-format
msgid "Tangerine Font"
msgstr ""
#. +> trunk5 stable5
#: packageplugins/shell/dockpackage.cpp:51
#, kde-format
msgid "Info View Window"
msgstr ""
#. +> trunk5 stable5
#: packageplugins/shell/dockpackage.cpp:53
#, kde-format
msgid "default layout file"
msgstr ""
#. +> trunk5 stable5
#: packageplugins/shell/dockpackage.cpp:54
#, kde-format
msgid "plasma layout file"
msgstr ""
#. +> trunk5 stable5
#: packageplugins/shell/dockpackage.cpp:55
#, kde-format
msgid "unity layout file"
msgstr ""
#. +> trunk5 stable5
#: packageplugins/shell/dockpackage.cpp:56
#, kde-format
msgid "extended layout file"
msgstr ""
#. +> trunk5 stable5
#: packageplugins/shell/dockpackage.cpp:58
#, kde-format
msgid "default preset file"
msgstr ""
#. +> trunk5 stable5
#: packageplugins/shell/dockpackage.cpp:59
#, kde-format
msgid "plasma preset file"
msgstr ""
#. +> trunk5 stable5
#: packageplugins/shell/dockpackage.cpp:60
#, kde-format
msgid "unity preset file"
msgstr ""
#. +> trunk5 stable5
#: packageplugins/shell/dockpackage.cpp:61
#, kde-format
msgid "extended preset file"
msgstr ""
#. +> stable5
#: packageplugins/shell/dockpackage.cpp:61
#, kde-format
msgid "tasks plasmoid separator"
msgstr ""
#. +> trunk5
#: packageplugins/shell/dockpackage.cpp:62
#, kde-format
msgid "multiple layouts hidden file"
msgstr ""
#. +> stable5
#: layoutconfigdialog.cpp:106
#, kde-format
msgctxt "new button"
msgid "New"
msgstr ""
#. +> stable5
#: layoutconfigdialog.cpp:107
#, kde-format
msgctxt "copy button"
msgid "Copy"
msgstr ""
#. +> stable5
#: layoutconfigdialog.cpp:108
#, kde-format
msgctxt "remove button"
msgid "Remove"
msgstr ""
#. +> stable5
#: layoutconfigdialog.cpp:109
#, kde-format
msgctxt "switch button"
msgid "Switch"
msgstr ""
#. +> stable5
#: layoutconfigdialog.cpp:110
#, kde-format
msgctxt "import button"
msgid "Import"
msgstr ""
#. +> stable5
#: layoutconfigdialog.cpp:111
#, kde-format
msgctxt "export button"
msgid "Export"
msgstr ""
#. +> trunk5
-#: settingsdialog.cpp:127
+#: settingsdialog.cpp:128
#, kde-format
msgid "Help"
msgstr ""
#. +> trunk5
-#: settingsdialog.cpp:130
+#: settingsdialog.cpp:131
#, kde-format
msgid "About Latte"
msgstr ""
#. +> trunk5 stable5
-#: settingsdialog.cpp:348
+#: settingsdialog.cpp:350
#, kde-format
msgctxt "import layout/configuration"
msgid "Import Layout/Configuration"
msgstr ""
#. +> trunk5 stable5
-#: settingsdialog.cpp:357
+#: settingsdialog.cpp:359
#, kde-format
msgctxt "import latte layout"
msgid "Latte Dock Layout file v0.2"
msgstr ""
#. +> trunk5 stable5
-#: settingsdialog.cpp:358
+#: settingsdialog.cpp:360
#, kde-format
msgctxt "import latte layouts/configuration"
msgid "Latte Dock Full Configuration file (v0.1, v0.2)"
msgstr ""
#. +> trunk5 stable5
-#: settingsdialog.cpp:374
+#: settingsdialog.cpp:376
#, kde-format
msgid "Import: Configuration file version v0.1"
msgstr ""
#. +> trunk5 stable5
-#: settingsdialog.cpp:376
+#: settingsdialog.cpp:378
#, kde-format
msgid ""
"You are going to import an old version <b>v0.1</b> configuration file.<br>"
"<b>Be careful</b>, importing the entire configuration <b>will erase all</b> your current configuration!!!<br>"
"<br>"
" <i>Alternative, you can <b>import safely</b> from this file<br>"
"<b>only the contained layouts...</b></i>"
msgstr ""
#. +> trunk5 stable5
-#: settingsdialog.cpp:381
+#: settingsdialog.cpp:383
#, kde-format
msgctxt "import full configuration"
msgid "Full Configuration"
msgstr ""
#. +> trunk5 stable5
-#: settingsdialog.cpp:383
+#: settingsdialog.cpp:385
#, kde-format
msgctxt "import only the layouts"
msgid "Only Layouts"
msgstr ""
#. +> trunk5 stable5
-#: settingsdialog.cpp:409
+#: settingsdialog.cpp:411
#, kde-format
msgid "Import: Configuration file version v0.2"
msgstr ""
#. +> trunk5 stable5
-#: settingsdialog.cpp:411
+#: settingsdialog.cpp:413
#, kde-format
msgid ""
"You are going to import a <b>v0.2</b> configuration file.<br>"
"<b>Be careful</b>, importing <b>will erase all</b> your current configuration!!!<br>"
msgid "Learn to multiply numbers within a limited period of time"
msgstr ""
#. Help prerequisite
#. +> trunk5 stable5
#: activities/algebra_by/ActivityInfo.qml:34
msgctxt "ActivityInfo|"
msgid "Multiplication tables from 1 to 10"
msgstr ""
#. Help manual
#. +> trunk5 stable5
#: activities/algebra_by/ActivityInfo.qml:36
msgctxt "ActivityInfo|"
msgid "Two numbers are displayed on the screen. Quickly multiply them and use your computer's keyboard or the on-screen keypad to type the product of the numbers. You have to be fast and submit the answer before the penguins in their balloon land!"
msgstr ""
#. Activity title
#. +> trunk5 stable5
#: activities/algebra_div/ActivityInfo.qml:27
msgctxt "ActivityInfo|"
msgid "Division of numbers"
msgstr ""
#. Help title
#. +> trunk5 stable5
#: activities/algebra_div/ActivityInfo.qml:29
msgctxt "ActivityInfo|"
msgid "Practice the division operation"
msgstr ""
#. Help goal
#. +> trunk5 stable5
#: activities/algebra_div/ActivityInfo.qml:32
msgctxt "ActivityInfo|"
msgid "Find the result of the division within a limited period of time"
msgstr ""
#. Help prerequisite
#. +> trunk5 stable5
#: activities/algebra_div/ActivityInfo.qml:34
msgctxt "ActivityInfo|"
msgid "Division of small numbers"
msgstr ""
#. Help manual
#. +> trunk5 stable5
#: activities/algebra_div/ActivityInfo.qml:36
msgctxt "ActivityInfo|"
msgid "Two numbers are displayed on the screen. Quickly find the result of the division and use your computer's keyboard or the on-screen keypad to type it. You have to be fast and submit the answer before the penguins in their balloon land!"
msgstr ""
#. Activity title
#. +> trunk5 stable5
#: activities/algebra_minus/ActivityInfo.qml:27
msgctxt "ActivityInfo|"
msgid "Subtraction of numbers"
msgstr ""
#. Help title
#. +> trunk5 stable5
#: activities/algebra_minus/ActivityInfo.qml:29
msgctxt "ActivityInfo|"
msgid "Practice the subtraction operation"
msgstr ""
#. Help goal
#. +> trunk5 stable5
#: activities/algebra_minus/ActivityInfo.qml:32
msgctxt "ActivityInfo|"
msgid "Learn to find the difference between two numbers within a limited period of time"
msgstr ""
#. Help prerequisite
#. +> trunk5 stable5
#: activities/algebra_minus/ActivityInfo.qml:34
msgctxt "ActivityInfo|"
msgid "Subtraction of small numbers"
msgstr ""
#. Help manual
#. +> trunk5 stable5
#: activities/algebra_minus/ActivityInfo.qml:36
msgctxt "ActivityInfo|"
msgid "Two numbers are displayed on the screen. Quickly find the difference between them and use your computer's keyboard or the on-screen keypad to type it. You have to be fast and submit the answer before the penguins in their balloon land!"
msgstr ""
#. Activity title
#. +> trunk5 stable5
#: activities/algebra_plus/ActivityInfo.qml:27
msgctxt "ActivityInfo|"
msgid "Addition of numbers"
msgstr ""
#. Help title
#. +> trunk5 stable5
#: activities/algebra_plus/ActivityInfo.qml:29
msgctxt "ActivityInfo|"
msgid "Practice the addition of numbers"
msgstr ""
#. Help goal
#. +> trunk5 stable5
#: activities/algebra_plus/ActivityInfo.qml:32
msgctxt "ActivityInfo|"
msgid "Learn to find the sum of two numbers within a limited period of time"
msgstr ""
#. Help prerequisite
#. +> trunk5 stable5
#: activities/algebra_plus/ActivityInfo.qml:34
msgctxt "ActivityInfo|"
msgid "Simple addition. Can recognize written numbers"
msgstr ""
#. Help manual
#. +> trunk5 stable5
#: activities/algebra_plus/ActivityInfo.qml:36
msgctxt "ActivityInfo|"
msgid "Two numbers are displayed on the screen. Quickly find the sum of them and use your computer's keyboard or the on-screen keypad to type it. You have to be fast and submit the answer before the penguins land in their balloon!"
msgstr ""
#. Activity title
#. +> trunk5 stable5
#: activities/algorithm/ActivityInfo.qml:27
msgctxt "ActivityInfo|"
msgid "Logical associations"
msgstr ""
#. Help title
#. +> trunk5 stable5
#: activities/algorithm/ActivityInfo.qml:29
msgctxt "ActivityInfo|"
msgid "Complete the arrangement of fruits"
msgstr ""
#. Help goal
#. +> trunk5 stable5
#: activities/algorithm/ActivityInfo.qml:32
msgctxt "ActivityInfo|"
msgid "Logic training activity"
msgstr ""
#. Help manual
#. +> trunk5 stable5
#: activities/algorithm/ActivityInfo.qml:34
msgctxt "ActivityInfo|"
msgid "Look at the two sequences. Each fruit in the first sequence has been replaced by another fruit in the second sequence. Complete the second sequence by using the correct fruits, after studying this pattern."
msgstr ""
#. Activity title
#. +> trunk5 stable5
#: activities/align4-2players/ActivityInfo.qml:27
msgctxt "ActivityInfo|"
msgid "Align four (with a friend)"
msgstr ""
#. Help title
#. +> trunk5 stable5
#: activities/align4-2players/ActivityInfo.qml:29
#: activities/align4/ActivityInfo.qml:29
msgctxt "ActivityInfo|"
msgid "Arrange four tokens in a row"
msgstr ""
#. Help goal
#. +> trunk5 stable5
#: activities/align4-2players/ActivityInfo.qml:32
#: activities/align4/ActivityInfo.qml:32
msgctxt "ActivityInfo|"
msgid "Create a line of 4 tokens either horizontally (lying down), vertically (standing up) or diagonally."
msgstr ""
#. Help manual
#. +> trunk5 stable5
#: activities/align4-2players/ActivityInfo.qml:34
msgctxt "ActivityInfo|"
msgid "Play with a friend. Take turns to click the line in which you want to drop a token. You can also use the arrow keys to move the token left or right, and the down or space key to drop a token. First player to create a line of 4 tokens wins"
msgstr ""
#. Activity title
#. +> trunk5 stable5
#: activities/align4/ActivityInfo.qml:27
msgctxt "ActivityInfo|"
msgid "Align four (against Tux)"
msgstr ""
#. Help manual
#. +> trunk5 stable5
#: activities/align4/ActivityInfo.qml:34
msgctxt "ActivityInfo|"
msgid "Play with the computer. Take turns to click the line in which you want to drop a token. You can also use the arrow keys to move the token left or right, and the down or space key to drop a token. First player to create a line of 4 tokens wins"
msgid "Catch the alphabet letters. With a keyboard use the arrow keys to move the helicopter. With a pointing device you just click or tap on the target location. To know which letter you have to catch you can either remember it or check the bottom right corner."
"Just type on the real or virtual keyboard like in a wordprocessor.\n"
" Clicking on the 'Title' button will make the text bigger. Similarly, the 'subtitle' button will make the text slightly less bigger. Clicking on 'paragraph' will remove the formatting.\n"
" Press 'Shift' and use the arrow keys to select the text. Use Ctrl+C to copy, Ctrl+V to paste and Crtl+X to cut text. Ctrl+Z can be used to undo changes.\n"
" Try to fiddle around and find more shortcuts. For example, what is the shortcut to select all the text?"
msgid "Drag and Drop the items to make them match"
msgstr ""
#. Help goal
#. +> trunk5 stable5
#: activities/babymatch/ActivityInfo.qml:35
msgctxt "ActivityInfo|"
msgid "Motor coordination. Conceptual matching."
msgstr ""
#. Help prerequisite
#. +> trunk5 stable5
#: activities/babymatch/ActivityInfo.qml:37
msgctxt "ActivityInfo|"
msgid "Cultural references."
msgstr ""
#. Help manual
#. +> trunk5 stable5
#: activities/babymatch/ActivityInfo.qml:39
msgctxt "ActivityInfo|"
msgid "In the main board area, a set of objects is displayed. In the vertical box (at the left of the main board) another set of objects is shown, each object in the group on the left matching exactly one object in the main board area. This game challenges you to find the logical link between these objects. How do they fit together? Drag each object to the correct red space in the main area."
msgid "Ambrosius Bosschaert the Elder, Flower Still Life - 1614"
msgstr ""
#. Activity title
#. +> trunk5 stable5
#: activities/balancebox/ActivityInfo.qml:30
msgctxt "ActivityInfo|"
msgid "Balance Box"
msgstr ""
#. Help title
#. +> trunk5 stable5
#: activities/balancebox/ActivityInfo.qml:32
msgctxt "ActivityInfo|"
msgid "Navigate the ball to the door by tilting the box."
msgstr ""
#. Help goal
#. +> trunk5 stable5
#: activities/balancebox/ActivityInfo.qml:35
msgctxt "ActivityInfo|"
msgid "Practice fine motor skills and basic counting."
msgstr ""
#. Help manual
#. +> trunk5 stable5
#: activities/balancebox/ActivityInfo.qml:39
msgctxt "ActivityInfo|"
msgid ""
"Navigate the ball to the door. Be careful not to make it fall into the holes. Numbered-contact buttons in the box need to be touched in the correct order to unlock the door. You can move the ball by tilting your mobile device. On desktop platforms use the arrow keys to simulate tilting.\n"
"\n"
"In the <b>configuration dialog</b> you can choose between the default 'Built-in' level set and one that you can define yourself ('User'). A user-defined level set can be created by choosing the 'user' level set and start the level editor by clicking on the corresponding button.\n"
"\n"
"In the <b>level editor</b> you can create your own levels. Choose one of the editing tools on the left side to modify the map cells of the currently active level in the editor:\n"
" Cross: Clear a map cell completely\n"
" Horizontal Wall: Set/remove a horizontal wall on the lower edge of a cell\n"
" Vertical Wall: Set/remove a vertical wall on the right edge of a cell\n"
" Hole: Set/remove a hole on a cell\n"
" Ball: Set the starting position of the ball\n"
" Door: Set the door position\n"
" Contact: Set/remove a contact button. With the spin-box you can adjust the value of the contact button. It is not possible to set a value more than once on a map.\n"
"All tools (except the clear-tool) toggle their respective target on the clicked cell: An item can be placed by clicking on an empty cell, and by clicking again on the same cell with the same tool, you can remove it again.\n"
"You can test a modified level by clicking on the 'Test' button on the right side of the editor view. You can return from testing mode by clicking on the home-button on the bar or by pressing escape on your keyboard or the back-button on your mobile device.\n"
"In the editor you can change the level currently edited by using the arrow buttons on the bar. Back in the editor you can continue editing the current level and test it again if needed.\n"
"When your level is finished you can save it to the user level file by clicking on the 'Save' button on the right side.\n"
"To return to the configuration dialog click on the home-button on the bar or press Escape on your keyboard or the back button on your mobile device."
msgstr ""
#. +> trunk5 stable5
#: activities/balancebox/Balancebox.qml:498
msgctxt "Balancebox|"
msgid "Built-in"
msgstr ""
#. +> trunk5 stable5
#: activities/balancebox/Balancebox.qml:499
msgctxt "Balancebox|"
msgid "User"
msgstr ""
#. +> trunk5 stable5
#: activities/balancebox/Balancebox.qml:510
msgctxt "Balancebox|"
msgid "Select your level set"
msgstr ""
#. +> trunk5 stable5
#: activities/balancebox/Balancebox.qml:517
msgctxt "Balancebox|"
msgid "Start Editor"
msgstr ""
#. +> trunk5 stable5
#: activities/balancebox/Balancebox.qml:549
msgctxt "Balancebox|"
msgid ""
"You selected the user-defined level set, but you have not yet defined any user levels!<br/>"
" Either create your user levels by starting the level editor or choose the 'built-in' level set."
msgid "Press the left and right arrow keys at the same time, to make the ball go in a straight line."
msgstr ""
#. Help manual
#. +> trunk5 stable5
#: activities/ballcatch/ActivityInfo.qml:36
msgctxt "ActivityInfo|"
msgid "Press the left and right arrow at the same time, to make the ball go in a straight line. On a touch screen you have to hit the two hands at the same time."
msgstr ""
#. +> trunk5 stable5
#: activities/ballcatch/Ballcatch.qml:228
msgctxt "Ballcatch|"
msgid "Tap both hands at the same time, to make the ball go in a straight line."
msgstr ""
#. +> trunk5 stable5
#: activities/ballcatch/Ballcatch.qml:230
msgctxt "Ballcatch|"
msgid "Press left and right arrow keys at the same time, to make the ball go in a straight line."
msgid "Click the number of balls you wish to place in the holes and then click the OK button. The winner is the one who hasn't put a ball in the red hole."
msgid "The screen has 3 sections: an interactive braille cell, an instruction telling you the letter to reproduce, and at the top the Braille letters to use as a reference. Each level teaches a set of 10 letters."
msgid "Each Braille character, or cell, is made up of six dot positions, arranged in a rectangle containing two columns of three dots each. As seen on the left, each dot is referenced by a number from 1 to 6."
msgid "When you are ready, click on me and try reproducing Braille characters."
msgstr ""
#. +> trunk5 stable5
#: activities/braille_alphabets/questions.js:23
#: activities/braille_alphabets/questions.js:27
#: activities/braille_alphabets/questions.js:31
#: activities/braille_alphabets/questions.js:35
#: activities/braille_alphabets/questions.js:39
#: activities/braille_alphabets/questions.js:43
#: activities/braille_alphabets/questions.js:47
#: activities/braille_alphabets/questions.js:51
#: activities/braille_alphabets/questions.js:55
#: activities/braille_alphabets/questions.js:59
#: activities/braille_alphabets/questions.js:65
#: activities/braille_alphabets/questions.js:69
#: activities/braille_alphabets/questions.js:73
#: activities/braille_alphabets/questions.js:77
#: activities/braille_alphabets/questions.js:81
#: activities/braille_alphabets/questions.js:85
#: activities/braille_alphabets/questions.js:89
#: activities/braille_alphabets/questions.js:93
#: activities/braille_alphabets/questions.js:97
#: activities/braille_alphabets/questions.js:101
#: activities/braille_alphabets/questions.js:107
#: activities/braille_alphabets/questions.js:111
#: activities/braille_alphabets/questions.js:115
#: activities/braille_alphabets/questions.js:119
#: activities/braille_alphabets/questions.js:123
#: activities/braille_alphabets/questions.js:127
#, qt-format
msgctxt "questions|"
msgid "Click on the dots in braille cell area to produce the letter %1."
msgstr ""
#. +> trunk5 stable5
#: activities/braille_alphabets/questions.js:133
#: activities/braille_alphabets/questions.js:137
#: activities/braille_alphabets/questions.js:141
#: activities/braille_alphabets/questions.js:145
#: activities/braille_alphabets/questions.js:150
#: activities/braille_alphabets/questions.js:154
#: activities/braille_alphabets/questions.js:158
#: activities/braille_alphabets/questions.js:162
#: activities/braille_alphabets/questions.js:166
#: activities/braille_alphabets/questions.js:170
#, qt-format
msgctxt "questions|"
msgid "Click on the dots in braille cell area to produce the number %1."
msgstr ""
#. +> trunk5 stable5
#: activities/braille_alphabets/questions.js:176
#: activities/braille_alphabets/questions.js:180
#: activities/braille_alphabets/questions.js:184
#: activities/braille_alphabets/questions.js:188
#: activities/braille_alphabets/questions.js:192
#, qt-format
msgctxt "questions|"
msgid "Click on the dots in braille cell area to produce the symbol %1."
msgstr ""
#. Activity title
#. +> trunk5 stable5
#: activities/braille_fun/ActivityInfo.qml:27
msgctxt "ActivityInfo|"
msgid "Braille Fun"
msgstr ""
#. Help title
#. +> trunk5 stable5
#: activities/braille_fun/ActivityInfo.qml:29
msgctxt "ActivityInfo|"
msgid "Braille the letters"
msgstr ""
#. Help prerequisite
#. +> trunk5 stable5
#: activities/braille_fun/ActivityInfo.qml:34
msgctxt "ActivityInfo|"
msgid "Braille Alphabet Codes"
msgstr ""
#. Help manual
#. +> trunk5 stable5
#: activities/braille_fun/ActivityInfo.qml:36
msgctxt "ActivityInfo|"
msgid "Enter the braille code in the tile for the letters on the banner pulled by Tux in his plane across the screen. Check the braille chart by clicking on the toggle button for help."
msgstr ""
#. Activity title
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/calendar/ActivityInfo.qml:27
msgctxt "ActivityInfo|"
msgid "Calendar"
msgstr ""
#. Help title
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/calendar/ActivityInfo.qml:29
msgctxt "ActivityInfo|"
msgid "Read the task and select the correct date on calendar"
msgstr ""
#. Help goal
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/calendar/ActivityInfo.qml:32
msgctxt "ActivityInfo|"
msgid "Learn to use a calendar efficiently"
msgstr ""
#. Help prerequisite
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/calendar/ActivityInfo.qml:34
msgctxt "ActivityInfo|"
msgid "Concept of week, month and year"
msgstr ""
#. Help manual
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/calendar/ActivityInfo.qml:36
#: activities/find_the_day/ActivityInfo.qml:36
msgctxt "ActivityInfo|"
msgid "Review the instructions and select the correct date on calendar."
msgstr ""
-#. +> trunk5
-#: activities/calendar/Calendar.qml:263
+#. +> trunk5 stable5
+#: activities/calendar/Calendar.qml:266
msgctxt "Calendar|"
msgid "Sunday"
msgstr ""
-#. +> trunk5
-#: activities/calendar/Calendar.qml:264
+#. +> trunk5 stable5
+#: activities/calendar/Calendar.qml:267
msgctxt "Calendar|"
msgid "Monday"
msgstr ""
-#. +> trunk5
-#: activities/calendar/Calendar.qml:265
+#. +> trunk5 stable5
+#: activities/calendar/Calendar.qml:268
msgctxt "Calendar|"
msgid "Tuesday"
msgstr ""
-#. +> trunk5
-#: activities/calendar/Calendar.qml:266
+#. +> trunk5 stable5
+#: activities/calendar/Calendar.qml:269
msgctxt "Calendar|"
msgid "Wednesday"
msgstr ""
-#. +> trunk5
-#: activities/calendar/Calendar.qml:267
+#. +> trunk5 stable5
+#: activities/calendar/Calendar.qml:270
msgctxt "Calendar|"
msgid "Thursday"
msgstr ""
-#. +> trunk5
-#: activities/calendar/Calendar.qml:268
+#. +> trunk5 stable5
+#: activities/calendar/Calendar.qml:271
msgctxt "Calendar|"
msgid "Friday"
msgstr ""
-#. +> trunk5
-#: activities/calendar/Calendar.qml:269
+#. +> trunk5 stable5
+#: activities/calendar/Calendar.qml:272
msgctxt "Calendar|"
msgid "Saturday"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/calendar/calendar_dataset.js:46
msgctxt "calendar_dataset|"
msgid "Select day 23"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/calendar/calendar_dataset.js:50
msgctxt "calendar_dataset|"
msgid "Select day 1"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/calendar/calendar_dataset.js:54
msgctxt "calendar_dataset|"
msgid "Select day 16"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/calendar/calendar_dataset.js:58
msgctxt "calendar_dataset|"
msgid "Select day 28"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/calendar/calendar_dataset.js:62
msgctxt "calendar_dataset|"
msgid "Select day 11"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/calendar/calendar_dataset.js:66
msgctxt "calendar_dataset|"
msgid "Select day 20"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/calendar/calendar_dataset.js:86
msgctxt "calendar_dataset|"
msgid "What day of week is the 4th of given month?"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/calendar/calendar_dataset.js:90
msgctxt "calendar_dataset|"
msgid "What day of the week is the 12th of given month?"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/calendar/calendar_dataset.js:94
msgctxt "calendar_dataset|"
msgid "What day of the week is the 20th of given month?"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/calendar/calendar_dataset.js:98
msgctxt "calendar_dataset|"
msgid "What day of the week is the 28th of given month?"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/calendar/calendar_dataset.js:102
msgctxt "calendar_dataset|"
msgid "What day of the week is the 22nd of given month?"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/calendar/calendar_dataset.js:106
msgctxt "calendar_dataset|"
msgid "What day of the week is the 16th of given month?"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/calendar/calendar_dataset.js:110
msgctxt "calendar_dataset|"
msgid "What day of the week is the 10th of given month?"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/calendar/calendar_dataset.js:130
msgctxt "calendar_dataset|"
msgid "Select a Monday between days 1 and 7 of given month"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/calendar/calendar_dataset.js:134
msgctxt "calendar_dataset|"
msgid "Select a Tuesday between days 8 and 16 of given month"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/calendar/calendar_dataset.js:138
msgctxt "calendar_dataset|"
msgid "Select a Wednesday between days 15 and 22 of given month"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/calendar/calendar_dataset.js:142
msgctxt "calendar_dataset|"
msgid "Select a Thursday between days 26 and 31 of given month"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/calendar/calendar_dataset.js:146
msgctxt "calendar_dataset|"
msgid "Select a Friday between days 20 and 25 of given month"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/calendar/calendar_dataset.js:150
msgctxt "calendar_dataset|"
msgid "Select a Saturday between days 13 and 23 of given month"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/calendar/calendar_dataset.js:154
msgctxt "calendar_dataset|"
msgid "Select a Sunday between days 5 and 17 of given month"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/calendar/calendar_dataset.js:173
msgctxt "calendar_dataset|"
msgid "Select second day before the 15th of given month"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/calendar/calendar_dataset.js:177
msgctxt "calendar_dataset|"
msgid "Select fourth Sunday of given month"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/calendar/calendar_dataset.js:181
msgctxt "calendar_dataset|"
msgid "Select day one week after 13th of given month"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/calendar/calendar_dataset.js:185
msgctxt "calendar_dataset|"
msgid "Select fifth Thursday of given month"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/calendar/calendar_dataset.js:189
msgctxt "calendar_dataset|"
msgid "Select fourth day after 27th of given month"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/calendar/calendar_dataset.js:208
msgctxt "calendar_dataset|"
msgid "Find the month starting a Thursday and having 28 days"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/calendar/calendar_dataset.js:212
msgctxt "calendar_dataset|"
msgid "Find a month starting a Monday and having 31 days"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/calendar/calendar_dataset.js:216
msgctxt "calendar_dataset|"
msgid "Find the month between June and August"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/calendar/calendar_dataset.js:220
msgctxt "calendar_dataset|"
msgid "Find a month starting a Saturday"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/calendar/calendar_dataset.js:224
msgctxt "calendar_dataset|"
msgid "Find a month having 30 days"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/calendar/calendar_dataset.js:244
msgctxt "calendar_dataset|"
msgid "Find the first Monday of January month of year 2019"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/calendar/calendar_dataset.js:248
msgctxt "calendar_dataset|"
msgid "Find the second Wednesday of February month of year 2019"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/calendar/calendar_dataset.js:252
msgctxt "calendar_dataset|"
msgid "Find the third Friday of March month of year 2019"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/calendar/calendar_dataset.js:256
msgctxt "calendar_dataset|"
msgid "Find the fifth Sunday of April month of year 2018"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/calendar/calendar_dataset.js:260
msgctxt "calendar_dataset|"
msgid "Find the fourth Tuesday of July month of year 2018"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/calendar/calendar_dataset.js:264
msgctxt "calendar_dataset|"
msgid "Find the first Monday of August month of year 2018"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/calendar/calendar_dataset.js:268
msgctxt "calendar_dataset|"
msgid "Find the third Thursday of September month of year 2017"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/calendar/calendar_dataset.js:272
msgctxt "calendar_dataset|"
msgid "Find the fifth Sunday of October month of year 2017"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/calendar/calendar_dataset.js:276
msgctxt "calendar_dataset|"
msgid "Find the second Friday of December month of year 2017"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/calendar/calendar_dataset.js:295
msgctxt "calendar_dataset|"
msgid "Columbus Day is celebrated on the second monday of October. Find the date of Columbus Day in 2018"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/calendar/calendar_dataset.js:299
msgctxt "calendar_dataset|"
msgid "Braille Day is celebrated one day before January 5. Find the date of Braille Day in 2018"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/calendar/calendar_dataset.js:303
msgctxt "calendar_dataset|"
msgid "Mark's birthday is on March 4. His party is exactly two weeks later. Find the date of his party in 2018"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/calendar/calendar_dataset.js:307
msgctxt "calendar_dataset|"
msgid "Mother's Day falls on the second Sunday in May. Find the date of Mother's Day in 2018"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/calendar/calendar_dataset.js:311
msgctxt "calendar_dataset|"
msgid "Sports competition will be held on last Friday of September 2018. Select the date of sports competition on the calendar"
msgstr ""
#. Activity title
#. +> trunk5 stable5
#: activities/canal_lock/ActivityInfo.qml:27
msgctxt "ActivityInfo|"
msgid "Operate a canal lock"
msgstr ""
#. Help title
#. +> trunk5 stable5
#: activities/canal_lock/ActivityInfo.qml:29
msgctxt "ActivityInfo|"
msgid "Tux is in trouble, and needs to take his boat through a lock. Help Tux and find out how a canal lock works."
msgstr ""
#. Help manual
#. +> trunk5 stable5
#: activities/canal_lock/ActivityInfo.qml:36
msgctxt "ActivityInfo|"
msgid "You are in charge of the canal lock. Open the gates and the locks in the right order, so Tux can travel through the gates in both directions."
msgstr ""
#. +> trunk5 stable5
#: activities/canal_lock/ActivityInfo.qml:37
#: activities/watercycle/ActivityInfo.qml:37
msgctxt "ActivityInfo|"
msgid "Drawing by Stephane Cabaraux."
msgstr ""
#. Activity title
#. +> trunk5 stable5
#: activities/categorization/ActivityInfo.qml:27
msgctxt "ActivityInfo|"
msgid "Categorization"
msgstr ""
#. Help title
#. +> trunk5 stable5
#: activities/categorization/ActivityInfo.qml:29
msgctxt "ActivityInfo|"
msgid "Categorize the elements into correct and incorrect groups"
msgstr ""
#. Help goal
#. +> trunk5 stable5
#: activities/categorization/ActivityInfo.qml:32
msgctxt "ActivityInfo|"
msgid "Build conceptual thinking and enrich knowledge"
msgstr ""
#. Help prerequisite
#. +> trunk5 stable5
#: activities/categorization/ActivityInfo.qml:34
msgctxt "ActivityInfo|"
msgid "Can drag elements using mouse"
msgstr ""
#. Help manual
#. +> trunk5 stable5
#: activities/categorization/ActivityInfo.qml:36
msgctxt "ActivityInfo|"
msgid "Review the instructions and then drag and drop the elements as specified"
msgid "You don't have all the images for this activity. Press Update to get the complete dataset. Press the Cross to play with demo version or 'Never show this dialog later' if you want to never see again this dialog."
"Checkers is played by two opponents, on opposite sides of the gameboard. One player has the dark pieces; the other has the light pieces. Players alternate turns. A player may not move an opponent's piece. A move consists of moving a piece diagonally to an adjacent unoccupied square. If the adjacent square contains an opponent's piece, and the square immediately beyond it is vacant, the piece may be captured (and removed from the game) by jumping over it.\n"
"Only the dark squares of the checkered board are used. A piece may move only diagonally into an unoccupied square. Capturing is mandatory. The player without pieces remaining, or who cannot move due to being blocked, loses the game.\n"
"When a man reaches the crownhead or kings row (the farthest row forward), it becomes a king, and is marked by placing an additional piece on top of the first man, and acquires additional powers including the ability to move backwards. If there is a piece in a diagonal that a king can capture, he can move any distance along the diagonal, and may capture an opposing man any distance away by jumping to any of the unoccupied squares immediately beyond it.\n"
msgid "The checkers library is draughts.js <https://github.com/shubhendusaurabh/draughts.js>. Manual is from wikipedia <https://en.wikipedia.org/wiki/Draughts>"
"In this activity you discover the chess game by playing against the computer. It displays the possible target position for any selected piece which helps the children understand how pieces moves. At first level the computer is fully random to give the most chances to the children. As level increases, better the computer plays.\n"
"\n"
"You can achieve a mate sooner if follow these simple rules:\n"
" Trying to drive opponent's King in the corner.\n"
"<b>Explanation</b>: this way opponent's piece would have only 3 directions to move instead of 8 from a best position.\n"
" 'Making a trap'. Use your pawns as baits.\n"
"<b>Explanation</b>: this way you can lure the opponent out of his 'comfort zone'.\n"
" Be patient enough.\n"
"<b>Explanation</b>: don't rush too quick, be patient. Let yourself think a little bit and try to predict your opponent's future moves, so you can catch him on it or secure your pieces from his attacks."
msgstr ""
#. +> trunk5 stable5
#: activities/chess/ActivityInfo.qml:44
#: activities/chess_partyend/ActivityInfo.qml:44
msgctxt "ActivityInfo|"
msgid "The chess engine is p4wn <https://github.com/douglasbagnall/p4wn>."
msgstr ""
#. +> trunk5 stable5
#: activities/chess/chess.js:128
msgctxt "chess|"
msgid "Black's turn"
msgstr ""
#. +> trunk5 stable5
#: activities/chess/chess.js:128
msgctxt "chess|"
msgid "White's turn"
msgstr ""
#. +> trunk5 stable5
#: activities/chess/chess.js:133
msgctxt "chess|white wins"
msgid "White mates"
msgstr ""
#. +> trunk5 stable5
#: activities/chess/chess.js:133
msgctxt "chess|black wins"
msgid "Black mates"
msgstr ""
#. +> trunk5 stable5
#: activities/chess/chess.js:143
msgctxt "chess|"
msgid "Drawn game"
msgstr ""
#. +> trunk5 stable5
#: activities/chess/chess.js:147
msgctxt "chess|black king is under attack"
msgid "White checks"
msgstr ""
#. +> trunk5 stable5
#: activities/chess/chess.js:147
msgctxt "chess|white king is under attack"
msgid "Black checks"
msgstr ""
#. +> trunk5 stable5
#: activities/chess/chess.js:149
msgctxt "chess|"
msgid "Invalid, your king may be in check"
msgstr ""
#. +> trunk5 stable5
#: activities/chess/Chess.qml:144
msgctxt "Chess|"
msgid "Undo"
msgstr ""
#. +> trunk5 stable5
#: activities/chess/Chess.qml:160
msgctxt "Chess|"
msgid "Redo"
msgstr ""
#. +> trunk5 stable5
#: activities/chess/Chess.qml:182
msgctxt "Chess|"
msgid "Swap"
msgstr ""
#. Activity title
#. +> trunk5 stable5
#: activities/chess_2players/ActivityInfo.qml:27
msgctxt "ActivityInfo|"
msgid "Play chess against your friend"
msgstr ""
#. Help manual
#. +> trunk5 stable5
#: activities/chess_2players/ActivityInfo.qml:36
msgctxt "ActivityInfo|"
msgid ""
"In this activity you discover the chess game by playing against a friend. It displays the possible target position for any selected piece which helps the children understand how pieces moves.\n"
"\n"
"You can achieve a mate sooner if follow these simple rules:\n"
" Trying to drive opponent's King in the corner.\n"
"<b>Explanation</b>: this way opponent's piece would have only 3 directions to move instead of 8 from a best position.\n"
" 'Making a trap'. Use your pawns as baits.\n"
"<b>Explanation</b>: this way you can lure the opponent out of his 'comfort zone'.\n"
" Be patient enough.\n"
"<b>Explanation</b>: don't rush too quick, be patient. Let yourself think a little bit and try to predict your opponent's future moves, so you can catch him on it or secure your pieces from his attacks."
msgstr ""
#. Activity title
#. +> trunk5 stable5
#: activities/chess_partyend/ActivityInfo.qml:27
msgctxt "ActivityInfo|"
msgid "End of chess game"
msgstr ""
#. Help title
#. +> trunk5 stable5
#: activities/chess_partyend/ActivityInfo.qml:29
msgctxt "ActivityInfo|"
msgid "Play the end of the chess game against Tux"
msgstr ""
#. Help manual
#. +> trunk5 stable5
#: activities/chess_partyend/ActivityInfo.qml:36
msgctxt "ActivityInfo|"
msgid ""
"In this activity you discover the chess game by playing only the end of a game. It displays the possible target position for any selected piece which helps the children understand how pieces moves.\n"
"\n"
"You can achieve a mate sooner if follow these simple rules:\n"
" Trying to drive opponent's King in the corner.\n"
"<b>Explanation</b>: this way opponent's piece would have only 3 directions to move instead of 8 from a best position.\n"
" 'Making a trap'. Use your pawns as baits.\n"
"<b>Explanation</b>: this way you can lure the opponent out of his 'comfort zone'.\n"
" Be patient enough.\n"
"<b>Explanation</b>: don't rush too quick, be patient. Let yourself think a little bit and try to predict your opponent's future moves, so you can catch him on it or secure your pieces from his attacks."
msgstr ""
#. Activity title
#. +> trunk5 stable5
#: activities/chronos/ActivityInfo.qml:31
msgctxt "ActivityInfo|"
msgid "Chronos"
msgstr ""
#. Help title
#. +> trunk5 stable5
#: activities/chronos/ActivityInfo.qml:33
msgctxt "ActivityInfo|"
msgid "Drag and Drop the items to organize the story"
msgstr ""
#. Help goal
#. +> trunk5 stable5
#: activities/chronos/ActivityInfo.qml:36
msgctxt "ActivityInfo|"
msgid "Sort the pictures into the order that tells the story"
msgstr ""
#. Help prerequisite
#. +> trunk5 stable5
#: activities/chronos/ActivityInfo.qml:38
msgctxt "ActivityInfo|"
msgid "Tell a short story"
msgstr ""
#. Help manual
#. +> trunk5 stable5
#: activities/chronos/ActivityInfo.qml:40
msgctxt "ActivityInfo|"
msgid "Pick from the pictures on the left and put them on the red dots"
msgstr ""
#. +> trunk5 stable5
#: activities/chronos/ActivityInfo.qml:41
msgctxt "ActivityInfo|"
msgid "Moon photo is copyright NASA. The space sounds come from Tuxpaint and Vegastrike which are released under the GPL license. The transportation images are copyright Franck Doucet. Dates of Transportation are based on those found in <http://www.wikipedia.org>."
msgid "A letter is spoken. Click on the matching letter in the main area. You can listen to the letter again, by clicking on the mouth icon in the bottom box."
msgstr ""
#. Activity title
#. +> trunk5 stable5
#: activities/clickanddraw/ActivityInfo.qml:27
msgctxt "ActivityInfo|"
msgid "Click and draw"
msgstr ""
#. Help title
#. +> trunk5 stable5
#: activities/clickanddraw/ActivityInfo.qml:29
msgctxt "ActivityInfo|"
msgid "Draw the picture by clicking on the selected points."
msgstr ""
#. Help prerequisite
#. +> trunk5 stable5
#: activities/clickanddraw/ActivityInfo.qml:34
msgctxt "ActivityInfo|"
msgid "Can move the mouse and click accurately on points."
msgstr ""
#. Help manual
#. +> trunk5 stable5
#: activities/clickanddraw/ActivityInfo.qml:36
msgctxt "ActivityInfo|"
msgid "Draw the picture by clicking on each point in sequence. Each time a point is selected the next blue one appears."
msgstr ""
#. Activity title
#. +> trunk5 stable5
#: activities/clickgame/ActivityInfo.qml:27
msgctxt "ActivityInfo|"
msgid "Click On Me"
msgstr ""
#. Help title
#. +> trunk5 stable5
#: activities/clickgame/ActivityInfo.qml:29
msgctxt "ActivityInfo|"
msgid "Catch all the swimming fish before they leave the fish tank"
msgstr ""
#. Help goal
#. +> trunk5 stable5
#: activities/clickgame/ActivityInfo.qml:32
msgctxt "ActivityInfo|"
msgid "Motor coordination: moving the hand precisely."
msgstr ""
#. Help prerequisite
#. +> trunk5 stable5
#: activities/clickgame/ActivityInfo.qml:34
msgctxt "ActivityInfo|"
msgid "Can move mouse and click on the correct place"
msgstr ""
#. Help manual
#. +> trunk5 stable5
#: activities/clickgame/ActivityInfo.qml:36
msgctxt "ActivityInfo|"
msgid "Catch all the moving fish by simple clicking or touching them with your finger."
msgstr ""
#. +> trunk5 stable5
#: activities/clickgame/ActivityInfo.qml:37
msgctxt "ActivityInfo|"
msgid "Fish are taken from the Unix utility xfishtank. All image credits belong to Guillaume Rousse."
msgstr ""
#. Activity title
#. +> trunk5 stable5
#: activities/clockgame/ActivityInfo.qml:27
msgctxt "ActivityInfo|"
msgid "Learning Clock"
msgstr ""
#. Help title
#. +> trunk5 stable5
#: activities/clockgame/ActivityInfo.qml:29
msgctxt "ActivityInfo|"
msgid "Learn how to tell the time on an analog clock"
msgstr ""
#. Help goal
#. +> trunk5 stable5
#: activities/clockgame/ActivityInfo.qml:32
msgctxt "ActivityInfo|"
msgid "Distinguish between time-units (hour, minute and second). Set and display time on an analog clock."
msgstr ""
#. Help prerequisite
#. +> trunk5 stable5
#: activities/clockgame/ActivityInfo.qml:34
msgctxt "ActivityInfo|"
msgid "The concept of time."
msgstr ""
#. Help manual
#. +> trunk5 stable5
#: activities/clockgame/ActivityInfo.qml:36
msgctxt "ActivityInfo|"
msgid "Set the clock to the given time, in the time-units shown (hours:minutes or hours:minutes:seconds). Drag the different arrows, to make the respective time unit go up or down."
msgstr ""
#. +> trunk5 stable5
#: activities/clockgame/Clockgame.qml:106
msgctxt "Clockgame|"
msgid "Set the watch to:"
msgstr ""
#. +> trunk5 stable5
#: activities/clockgame/Clockgame.qml:109
#, qt-format
msgctxt "Clockgame|"
msgid "%n hour(s)"
msgid_plural "%n hour(s)"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: activities/clockgame/Clockgame.qml:112
#, qt-format
msgctxt "Clockgame|"
msgid "%n minute(s)"
msgid_plural "%n minute(s)"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: activities/clockgame/Clockgame.qml:115
#, qt-format
msgctxt "Clockgame|"
msgid "%n second(s)"
msgid_plural "%n second(s)"
msgstr[0] ""
msgstr[1] ""
#. Activity title
#. +> trunk5 stable5
#: activities/color_mix/ActivityInfo.qml:27
msgctxt "ActivityInfo|"
msgid "Mixing color of paint"
msgstr ""
#. Help title
#. +> trunk5 stable5
#: activities/color_mix/ActivityInfo.qml:29
msgctxt "ActivityInfo|"
msgid "Discover paint color mixing."
msgstr ""
#. Help goal
#. +> trunk5 stable5
#: activities/color_mix/ActivityInfo.qml:32
msgctxt "ActivityInfo|"
msgid "Mix the primary colors to match to the given color"
msgstr ""
#. Help manual
#. +> trunk5 stable5
#: activities/color_mix/ActivityInfo.qml:36
msgctxt "ActivityInfo|"
msgid ""
"\n"
"The activity deals with mixing primary colors of paint (subtractive mixing).\n"
"\n"
"In case of paints the inks absorb different colors of light falling on it, subtracting it from what you see. The more ink you add, the more light is absorbed, and the darker the combined color gets. We can mix just three primary colors to make many new colors. The primary colors for paint/ink are cyan (a special shade of blue), magenta (a special shade of pink), and yellow.\n"
" "
msgstr ""
#. +> trunk5 stable5
#: activities/color_mix/ActivityInfo.qml:41
msgctxt "ActivityInfo|"
msgid "Images from http://openclipart.org"
msgstr ""
#. +> trunk5 stable5
#: activities/color_mix/ColorMix.qml:97
msgctxt "ColorMix|"
msgid "Match the color"
msgstr ""
#. +> trunk5 stable5
#: activities/color_mix/ColorMix.qml:206
msgctxt "ColorMix|"
msgid "Not enough red"
msgstr ""
#. +> trunk5 stable5
#: activities/color_mix/ColorMix.qml:208
msgctxt "ColorMix|"
msgid "Too much red"
msgstr ""
#. +> trunk5 stable5
#: activities/color_mix/ColorMix.qml:211
msgctxt "ColorMix|"
msgid "Not enough green"
msgstr ""
#. +> trunk5 stable5
#: activities/color_mix/ColorMix.qml:213
msgctxt "ColorMix|"
msgid "Too much green"
msgstr ""
#. +> trunk5 stable5
#: activities/color_mix/ColorMix.qml:216
msgctxt "ColorMix|"
msgid "Not enough blue"
msgstr ""
#. +> trunk5 stable5
#: activities/color_mix/ColorMix.qml:218
msgctxt "ColorMix|"
msgid "Too much blue"
msgstr ""
#. +> trunk5 stable5
#: activities/color_mix/ColorMix.qml:222
msgctxt "ColorMix|"
msgid "Not enough magenta"
msgstr ""
#. +> trunk5 stable5
#: activities/color_mix/ColorMix.qml:224
msgctxt "ColorMix|"
msgid "Too much magenta"
msgstr ""
#. +> trunk5 stable5
#: activities/color_mix/ColorMix.qml:227
msgctxt "ColorMix|"
msgid "Not enough yellow"
msgstr ""
#. +> trunk5 stable5
#: activities/color_mix/ColorMix.qml:229
msgctxt "ColorMix|"
msgid "Too much yellow"
msgstr ""
#. +> trunk5 stable5
#: activities/color_mix/ColorMix.qml:232
msgctxt "ColorMix|"
msgid "Not enough cyan"
msgstr ""
#. +> trunk5 stable5
#: activities/color_mix/ColorMix.qml:234
msgctxt "ColorMix|"
msgid "Too much cyan"
msgstr ""
#. Activity title
#. +> trunk5 stable5
#: activities/color_mix_light/ActivityInfo.qml:27
msgctxt "ActivityInfo|"
msgid "Mixing colors of light"
msgstr ""
#. Help title
#. +> trunk5 stable5
#: activities/color_mix_light/ActivityInfo.qml:29
msgctxt "ActivityInfo|"
msgid "Discover light color mixing."
msgstr ""
#. Help goal
#. +> trunk5 stable5
#: activities/color_mix_light/ActivityInfo.qml:32
msgctxt "ActivityInfo|"
msgid "Mix the primary colors to match to the given color."
msgstr ""
#. Help manual
#. +> trunk5 stable5
#: activities/color_mix_light/ActivityInfo.qml:36
msgctxt "ActivityInfo|"
msgid ""
"\n"
"The activity deals with mixing primary colors of light (additive mixing).\n"
"\n"
"In case of light it is just the opposite of mixing color with paints! The more light you add the lighter the resultant color will get. Primary colors of light are red, green and blue.\n"
" "
msgstr ""
#. Activity title
#. +> trunk5 stable5
#: activities/colors/ActivityInfo.qml:27
msgctxt "ActivityInfo|"
msgid "Colors"
msgstr ""
#. Help title
#. +> trunk5 stable5
#: activities/colors/ActivityInfo.qml:29
msgctxt "ActivityInfo|"
msgid "Click on the right color"
msgstr ""
#. Help goal
#. +> trunk5 stable5
#: activities/colors/ActivityInfo.qml:32
msgctxt "ActivityInfo|"
msgid "This activity teaches you to recognize different colors. When you hear the name of the color, touch the duck wearing it."
msgstr ""
#. Help prerequisite
#. +> trunk5 stable5
#: activities/colors/ActivityInfo.qml:34
msgctxt "ActivityInfo|"
msgid "Identifying colours"
msgstr ""
#. Help manual
#. +> trunk5 stable5
#: activities/colors/ActivityInfo.qml:36
msgctxt "ActivityInfo|"
msgid "Listen to the color and touch the matching duck."
msgid "Move the items in the left frame to copy their position in the right model. Next to the crane itself, you will find four arrows that let you move the items. To select the item to move, just click on it. If you prefer, you can use the arrow keys and the space or tab key instead. On a mobile version, you can also swipe up/down/left/right to move the items in the left frame."
msgid "Drag electrical components from the selector and drop them in the working area. You can also move components by dragging them. To delete a component, select the deletion tool on top of the component selector, and select the component. You can click on the component and then on the rotate button to rotate it or info button to get information about it. You can click on the switch to open and close it. To connect two terminals, click on first terminal, then on second terminal. To deselect terminal or delete tool, click on any empty area. The simulation is updated in real time by any user action."
msgid "BCD to 7 segment converter takes 4 binary inputs in its input terminals and gives 7 binary outputs which allow to light BCD number segments (binary-coded decimal) to display numbers between 0 and 9. The output for BCD To 7 Segment converted is:"
msgid "Comparator takes 2 numbers as input, A and B. It compares them and outputs 3 values. First output is 1 if A < B, 0 otherwise. Second is 1 if A = B, 0 otherwise. Third is 1 if A > B, 0 otherwise. "
msgid "NOR gate outputs the opposite of OR gate. As soon as there is a 1 in input the output is equal to 0. To obtain a 1 all the inputs must be equal to 0:"
msgid "Digital electronics works with only two states: 0 and 1. This allows to operate mathematical operations such as additions, subtractions... It is the basics of computer technics. In reality, 0 is often the representation of a voltage nearly equal to ground voltage and 1 is the representation of the supply voltage of a circuit."
msgid "7 segment display takes 7 binary inputs in its input terminals. The display consists of 7 segments and each segment gets lighted according to the input. By generating different combination of binary inputs, the display can be used to display numbers from 0 to 9 and a few letters. The diagram is:"
msgid "Signal Generator is used to generate alternating signals of 0 and 1. The time between two changes can be modified by pressing the arrows on the generator."
msgid "Switch is used to connect or disconnect two terminals. If the switch is turned on, current can flow through the switch. If the switch is turned off, then the connection between terminal is broken and current can not flow through it."
msgid "XOR gate outputs 1 if the number of '1' in input is odd, and 0 if number of '1' in input is even. In this activity, a 2 input XOR gate is shown. Output for 2 input XOR gate is:"
msgid "Digital electronics works with only two states: 0 and 1. This allows to operate mathematical operations such as additions, subtractions.. It is the basics of computer technics. In reality, 0 is often the representation of a voltage nearly equal to ground voltage and 1 is the representation of the supply voltage of a circuit."
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/digital_electricity/Dataset.qml:30
msgctxt "Dataset|"
msgid "Zero input"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/digital_electricity/Dataset.qml:37
msgctxt "Dataset|"
msgid "One input"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/digital_electricity/Dataset.qml:44
msgctxt "Dataset|"
msgid "Digital light"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/digital_electricity/Dataset.qml:51
msgctxt "Dataset|"
msgid "AND gate"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/digital_electricity/Dataset.qml:58
msgctxt "Dataset|"
msgid "OR gate"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/digital_electricity/Dataset.qml:65
msgctxt "Dataset|"
msgid "NOT gate"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/digital_electricity/Dataset.qml:72
msgctxt "Dataset|"
msgid "XOR gate"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/digital_electricity/Dataset.qml:79
msgctxt "Dataset|"
msgid "NAND gate"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/digital_electricity/Dataset.qml:86
msgctxt "Dataset|"
msgid "NOR gate"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/digital_electricity/Dataset.qml:93
msgctxt "Dataset|"
msgid "Switch"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/digital_electricity/Dataset.qml:100
msgctxt "Dataset|"
msgid "Comparator"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/digital_electricity/Dataset.qml:107
msgctxt "Dataset|"
msgid "BCD to 7 segment"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/digital_electricity/Dataset.qml:114
msgctxt "Dataset|"
msgid "7 segment display"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/digital_electricity/Dataset.qml:121
msgctxt "Dataset|"
msgid "Signal generator"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/digital_electricity/Dataset.qml:128
msgctxt "Dataset|"
msgid "BCD counter"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/digital_electricity/Dataset.qml:155
msgctxt "Dataset|"
msgid "The digital light will glow when its terminal is connected with an input of 1."
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/digital_electricity/Dataset.qml:156
msgctxt "Dataset|"
msgid "Turn the digital light on using the inputs provided."
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/digital_electricity/Dataset.qml:169
msgctxt "Dataset|"
msgid "The AND gate produces an output of one when both of its input terminals are of value 1."
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/digital_electricity/Dataset.qml:170
msgctxt "Dataset|"
msgid "Turn the digital light on using an AND gate and the inputs provided."
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/digital_electricity/Dataset.qml:183
msgctxt "Dataset|"
msgid "The OR gate produces an output of 1 when at least one of its input terminals is of value 1."
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/digital_electricity/Dataset.qml:184
msgctxt "Dataset|"
msgid "Turn the digital light on using an OR gate and the inputs provided."
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/digital_electricity/Dataset.qml:197
msgctxt "Dataset|"
msgid "Note: You can draw multiple wires from the output terminal of a component."
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/digital_electricity/Dataset.qml:210
msgctxt "Dataset|"
msgid "The NOT gate takes a single binary input and flips the value in the output."
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/digital_electricity/Dataset.qml:223
msgctxt "Dataset|"
msgid "The NAND gate takes two binary inputs and produces one binary output."
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/digital_electricity/Dataset.qml:224
msgctxt "Dataset|"
msgid "The output of the NAND gate will be zero if both of its inputs are \"1\". Else, the output will be one."
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/digital_electricity/Dataset.qml:225
#: activities/digital_electricity/Dataset.qml:289
msgctxt "Dataset|"
msgid "For a more detailed description about the gate, select it and click on the info button."
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/digital_electricity/Dataset.qml:226
msgctxt "Dataset|"
msgid "Light the bulb using the NAND gate provided."
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/digital_electricity/Dataset.qml:242
msgctxt "Dataset|"
msgid "Light the bulb using the components provided such that the bulb will glow under the following two circumstances:"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/digital_electricity/Dataset.qml:243
msgctxt "Dataset|"
msgid "1. The first switch is turned ON, or"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/digital_electricity/Dataset.qml:244
msgctxt "Dataset|"
msgid "2. Both of the second and the third switches are turned on."
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/digital_electricity/Dataset.qml:257
msgctxt "Dataset|"
msgid "The XOR Gate takes two binary inputs and produces one binary output."
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/digital_electricity/Dataset.qml:258
msgctxt "Dataset|"
msgid "The output of the XOR gate will be one if the number of \"1\" in the input is odd. Else, the output will be zero."
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/digital_electricity/Dataset.qml:259
msgctxt "Dataset|"
msgid "Light the bulb using the XOR gate provided."
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/digital_electricity/Dataset.qml:275
msgctxt "Dataset|"
msgid "Light the bulb using the three switches such that the bulb glows when odd number of the switches are turned on."
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/digital_electricity/Dataset.qml:288
msgctxt "Dataset|"
msgid "A NOR gate takes 2 binary input and outputs 1 if both of them are 0, otherwise produces an output of 1."
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/digital_electricity/Dataset.qml:290
msgctxt "Dataset|"
msgid "Light the bulb using the NOR gate provided."
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/digital_electricity/Dataset.qml:303
#: activities/digital_electricity/Dataset.qml:364
msgctxt "Dataset|"
msgid "Use the gates such that the bulb will glow only when the switch is turned off and remain off when the switch is turned on."
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/digital_electricity/Dataset.qml:319
#: activities/digital_electricity/Dataset.qml:380
msgctxt "Dataset|"
msgid "Create a circuit using the components provided such that the bulb glows only when both of the switches are turned on."
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/digital_electricity/Dataset.qml:335
#: activities/digital_electricity/Dataset.qml:396
msgctxt "Dataset|"
msgid "Create a circuit using the components provided such that the bulb glows when either of the switches are turned on."
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/digital_electricity/Dataset.qml:351
msgctxt "Dataset|"
msgid "Create a circuit using the components provided such that the bulb glows only when both of the switches are turned off."
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/digital_electricity/Dataset.qml:412
msgctxt "Dataset|"
msgid "Create a circuit using the components provided such that the bulb will glow when at least one of the switches are turned off."
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/digital_electricity/Dataset.qml:428
msgctxt "Dataset|"
msgid "A comparator takes two numbers (A and B) as input and produces 3 values as output. First value is 1 if A < B, second value is 1 for A = B and third value is 1 for A > B."
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/digital_electricity/Dataset.qml:429
msgctxt "Dataset|"
msgid "Create a circuit using the components provided such that the bulb will glow when the value of the current flowing through the first switch is less than or equal to that of the second switch."
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/digital_electricity/Dataset.qml:442
msgctxt "Dataset|"
msgid "The component in the middle is a BCD to seven segment converter."
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/digital_electricity/Dataset.qml:443
msgctxt "Dataset|"
msgid "It takes 4 bits as input represented in the binary coded decimal (BCD) format and converts the BCD number into a seven segment code."
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/digital_electricity/Dataset.qml:444
msgctxt "Dataset|"
msgid "The output of the converter is connected to the seven segment display, to view the value of the input provided."
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/digital_electricity/Dataset.qml:445
msgctxt "Dataset|"
msgid "Display the number \"6\" in the seven segment display."
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/digital_electricity/Dataset.qml:458
msgctxt "Dataset|"
msgid "The signal generator on the left is used to generate alternating signals between 0 and 1 in a given time period taken as input. The time period by default is 1 second, but it can be changed between 0.25 and 2s."
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/digital_electricity/Dataset.qml:459
msgctxt "Dataset|"
msgid "The BCD counter placed under it is a special type of counter which can count from 0 to 9 and back to 0 on application of a clock signal."
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/digital_electricity/Dataset.qml:460
msgctxt "Dataset|"
msgid "Connect the components to make sure that the count of 0 to 9 is visible in the seven segment display provided."
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/digital_electricity/Dataset.qml:476
msgctxt "Dataset|"
msgid "Light the bulb using both the switches such that the bulb will glow only when either the first switch is on and the second switch is off or the first switch is off and the second switch is on."
msgid "First, properly organize the items so that you can count them. Then, select the item you want to answer in the bottom right area. Enter the answer with the keyboard."
msgstr ""
#. Activity title
#. +> trunk5 stable5
#: activities/erase/ActivityInfo.qml:27
msgctxt "ActivityInfo|"
msgid "Move the mouse or touch the screen"
msgstr ""
#. Help title
#. +> trunk5 stable5
#: activities/erase/ActivityInfo.qml:29
msgctxt "ActivityInfo|"
msgid "Move the mouse or touch the screen to erase the area and discover the background"
msgstr ""
#. Help prerequisite
#. +> trunk5 stable5
#: activities/erase/ActivityInfo.qml:34
#: activities/erase_2clic/ActivityInfo.qml:34
#: activities/erase_clic/ActivityInfo.qml:34
#: activities/hanoi/ActivityInfo.qml:34
#: activities/memory-tux/ActivityInfo.qml:34
#: activities/tangram/ActivityInfo.qml:41
msgctxt "ActivityInfo|"
msgid "Mouse-manipulation"
msgstr ""
#. Help manual
#. +> trunk5 stable5
#: activities/erase/ActivityInfo.qml:36
msgctxt "ActivityInfo|"
msgid "Move the mouse or touch the screen until all the blocks disappear."
msgstr ""
#. Activity title
#. +> trunk5 stable5
#: activities/erase_2clic/ActivityInfo.qml:27
msgctxt "ActivityInfo|"
msgid "Double tap or double click"
msgstr ""
#. Help title
#. +> trunk5 stable5
#: activities/erase_2clic/ActivityInfo.qml:29
msgctxt "ActivityInfo|"
msgid "Double tap or double click to erase the area and discover the background image"
msgstr ""
#. Help manual
#. +> trunk5 stable5
#: activities/erase_2clic/ActivityInfo.qml:36
msgctxt "ActivityInfo|"
msgid "Double tap or double click the mouse on rectangles until all the blocks disappear."
msgstr ""
#. Activity title
#. +> trunk5 stable5
#: activities/erase_clic/ActivityInfo.qml:27
msgctxt "ActivityInfo|"
msgid "Click or tap"
msgstr ""
#. Help title
#. +> trunk5 stable5
#: activities/erase_clic/ActivityInfo.qml:29
msgctxt "ActivityInfo|"
msgid "Click or tap to erase the area and discover the background"
msgstr ""
#. Help manual
#. +> trunk5 stable5
#: activities/erase_clic/ActivityInfo.qml:36
msgctxt "ActivityInfo|"
msgid "Click or tap on the blocks all of them disappear."
"In level one, players enjoy exploring each animal on the screen. Click on the question mark, and learn about the animal, what it's name is, what sound it makes, and what it looks like. Study well this information, because you will be tested in level 2 and 3!\n"
"\n"
"In level two, a random animal sound is played and you must choose which animal makes that sound. Click on the question mark that corresponds to the animal you hear. If you'd like to hear the animal sound repeated, click on the play button. When you have matched all animals correctly, you win!\n"
"\n"
"In level three, a random text prompt is displayed and you must click on the animal that matches the text. When you have matched all texts correctly, you win!\n"
msgid "The sheep is a mammal that bears a fleece of wool. It is a grazing herbivore, bred for its wool, its meat, and its milk. The fleece can be removed and used to produce articles of clothing and blankets, among other things."
msgid "Chichen Itza, meaning “at the mouth of the Itza well”, is a Mayan City on the Yucatan Peninsula in Mexico, between Valladolid and Merida. It was established before the period of Christopher Colombus and probably served as the religion center of Yucatan for a while."
msgid "The Colosseum or Coliseum is today the most recognizable of Rome's Classical buildings. Even 2,000 years after it was built, and despite centuries when the abandoned building was pillaged for building materials, it is instantly recognizable as a classical template for the stadia of today. It was the first permanent amphitheatre to be raised in Rome, and the most impressive arena the Classical world had yet seen."
msgid "Christ the Redeemer is an Art Deco statue of Jesus Christ in Rio de Janeiro, Brazil. A symbol of Christianity across the world, the statue has also become a cultural icon of both Rio de Janeiro and Brazil."
msgid "The Great Wall, was listed as a World Heritage by UNESCO in 1987. Just like a gigantic dragon, it winds up and down across deserts, grasslands, mountains and plateaus, stretching approximately 13,170 miles (21,196 kilometers) from east to west of China."
msgid "Machu Picchu stands 2,430 m above sea-level, in the middle of a tropical mountain forest, in an extraordinarily beautiful setting. It was probably the most amazing urban creation of the Inca Empire at its height; its giant walls, terraces and ramps seem as if they have been cut naturally in the continuous rock escarpments. The natural setting, on the eastern slopes of the Andes, encompasses the upper Amazon basin with its rich diversity of flora and fauna."
msgid "Petra is a historical and archaeological city in the southern Jordanian governorate of Ma'an that is famous for its rock-cut architecture and water conduit system. Established possibly as early as 312 BC as the capital city of the Arab Nabataeans, it is a symbol of Jordan, as well as Jordan's most-visited tourist attraction."
msgid "The Taj Mahal is a white marble mausoleum located on the southern bank of the Yamuna River in the Indian city of Agra. It was commissioned in 1632 by the Mughal emperor Shah Jahan reigned to house the tomb of his favorite wife of three, Mumtaz Mahal."
msgid "The Golden Temple Amritsar India (Sri Harimandir Sahib Amritsar) is not only a central religious place of the Sikhs, but also a symbol of human brotherhood and equality. Everybody, irrespective of cast, creed or race can seek spiritual solace and religious fulfillment without any hindrance. It also represents the distinct identity, glory and heritage of the Sikhs. To pen-down the philosophy, ideology, the inner and outer beauty, as well as the historical legacy of Sri Harimandir Sahib is a momentous task. It is a matter of experience rather than a of description."
msgid "Hawa Mahal, is a palace in Jaipur, India, so named because it was essentially a high screen wall built so the women of the royal household could observe street festivals while unseen from the outside. Constructed of red and pink sandstone, the palace sits on the edge of the City Palace, and extends to the zenana, or women's chambers."
msgid "The Taj Mahal is a white marble mausoleum located on the southern bank of the Yamuna River in the Indian city of Agra. It was commissioned in 1632 by the Mughal emperor Shah Jahan reigned to house the tomb of his favorite wife of three, Mumtaz Mahal."
msgid "The Gateway of India is one of India's most unique landmarks situated in the city of Mumbai. The colossal structure was constructed in 1924. Located at the tip of Apollo Bunder, the gateway overlooks the Mumbai harbor, bordered by the Arabian Sea in the Colaba district. The Gateway of India is a monument that marks India's chief ports and is a major tourist attraction for visitors who arrive in India for the first time."
msgid "The Great Stupa at Sanchi is the oldest stone structure in India and was originally commissioned by the emperor Ashoka the Great in the 3rd century BCE. Its nucleus was a simple hemispherical brick structure built over the relics of the Buddha. It was crowned by the chatra, a parasol-like structure symbolizing high rank, which was intended to honor and shelter the relics."
msgid "Ajanta is world's greatest historical monument recognized by UNESCO located just 55kms from Jalgaon city and 105kms from Aurangabad City of Maharashtra, India. There are 30 caves in Ajanta of which 9, 10, 19, 26 and 29 are chaitya-grihas and the rest are monasteries."
msgid "The Konark Sun Temple (also spelled Konarak) is a 13th-century Hindu temple dedicated to the Sun god. Shaped like a giant chariot, the temple is known for the exquisite stone carvings that cover the entire structure."
msgid "Mysore Palace or Mysore Maharaja Palace is one of the largest and most spectacular monuments in the country. Also known as Amba Vilas, it is located in the heart of the city of Mysore. The palace was initially built by the Wodeyar kings in the 14th century."
msgid "The Charminar in Hyderabad was constructed in 1591 by Mohammed Quli Qutab Shah. He built the Charminar to mark the end of plague in the Hyderabad city. Since the construction of the Charminar, the Hyderabad city has almost become synonymous with the monument. The Charminar is a massive and impressive structure with four minarets. In the evening, with illumination, the great Charminar looks even greater."
msgid "The Victoria Memorial was built to commemorate the peak of the British Empire in India. The Victoria Memorial, conceived by Lord Curzon, represents the architectural climax of Kolkata city. Lord Curzon, the then Viceroy specified its classical style but the actual plan of Victoria Memorial was laid down by the well-known architect, Sir William Emerson. The Victoria Memorial blends the best of the British and Mughal architecture. The Victoria Memorial hall was built with white Makrana marbles."
msgid "The Rang Ghar is a two-storied building which once served as the royal sports-pavilion where Ahom kings and nobles were spectators at games like buffalo fights and other sports at Rupahi Pathar - particularly during the Rongali Bihu festival in the Ahom capital of Rangpur."
msgid "Qutub Minar at 74 meters, is the tallest brick minaret in the world, and the second tallest minar in India after Fateh Burj at Mohali. Qutub Minar, along with the ancient and medieval monuments surrounding it, form the Qutb Complex, which is a UNESCO World Heritage Site. The tower is located in the Mehrauli area of Delhi, India. Made of red sandstone and marble."
msgid "Mont Saint-Michel is a rocky tidal island located in Normandy, at the mouth of the Couesnon River, near the city of Avranches. The highest point of the island is the spire at the top of the Abbey’s bell tower, 170 metres above sea level. They are currently less than 50 people living on the island. The unique feature of Mont Saint-Michel is that it is completely surrounded by water and can only be accessed at low tide."
msgid "With more than 4 million visitors each year, Carcassonne is among the most prestigious tourist destinations in France, on a par with Mont Saint Michel and Paris’ Notre-Dame. A UNESCO World Heritage Site since 1997, Carcassonne is a dramatic representation of medieval architecture perched on a rocky spur that towers above the River Aude, southeast of the new town."
msgid "By size, Reims Cathedral is quite an extraordinary construction: designed to accommodate huge crowds, its gigantic dimensions include a surface area of 6,650 m2 and a length of 122m. A Gothic art masterpiece and the coronation site of the Kings of France, it has been listed as a UNESCO World Heritage Site since 1991. The Mecca for tourists in the Champagne region welcomes 1,500,000 visitors every year."
msgid "The Pont du Gard was built shortly before the Christian era to allow the aqueduct of Nîmes (which is almost 50 km long) to cross the Gardon river. The Roman architects and hydraulic engineers who designed this bridge, which stands almost 50 m high and is on three levels – the longest measuring 275 m – created a technical as well as an artistic masterpiece."
msgid "This Roman amphitheatre dates back to the first century BC and was originally the setting for gladiator battles and chariot races during Antiquity. Modified many times, it was finally renovated during the 19th century."
msgid "Prestigious, majestic, colossal, extravagant are these adjectives enough to fully describe the splendour of Chambord? The largest chateau of the Loire Valley is indeed full of surprises for those who are lucky enough to explore its domain. This remarkable piece of architecture is certainly more than just a castle: it is the dream of a King, transformed into reality."
msgid "When coming from Cahors by road, Rocamadour suddenly appears clinging precariously against the cliff above the Alzou canyon. One of the most famous villages of Europe, Rocamadour seemingly defies the laws of gravity. The vertiginous Citadel of Faith is best summed up by an old local saying: “houses on the river, churches on the houses, rocks on the churches, castle on the rock”."
msgid "The star attraction of Avignon is the Palais des Papes (Palace of the Popes), a vast castle of significant historic, religious and architectural importance. It is one of the largest and most important medieval Gothic buildings in Europe."
msgid "Chateau de Chenonceau is among many of Loire Valley Chateaux that boast amazing architecture and historical significance drawing thousands of tourists from all over the world. Chateau de Chenonceau is sometimes called the Ladies Castle by some historians due to feminine figures having greatly influenced the construction and development of this French Chateau over the centuries."
msgid "The world-famous metallic tower was built for the Paris International Exhibition in 1889 for the centenary of the French Revolution. At the time of its inauguration, it was the world’s tallest monument."
msgid "The ultimate fairytale castle, Neuschwanstein is situated on a rugged hill near Füssen in southwest Bavaria. It was the inspiration for the Sleeping Beauty castles in the Disneyland parks. The castle was commissioned by King Ludwig II of Bavaria who was declared insane when the castle was almost completed in 1886 and found dead a few days later. Neuschwanstein is the most photographed building in the country and one of the most popular tourist attractions in Germany."
msgid "The Trier Imperial Baths are a large Roman bath complex in Trier, Germany. It is designated as part of the Roman Monuments, Cathedral of St. Peter and Church of Our Lady in Trier UNESCO World Heritage Site."
msgid "The Brandenburg Gate is the only surviving city gate of Berlin and symbolizes the reunification of East and West Berlin. Built in the 18th century, the Brandenburg Gate is the entry to Unter den Linden, the prominent boulevard of linden trees which once led directly to the palace of the Prussian monarchs. It is regarded as one of the most famous landmarks in Europe."
msgid "The Cathedral of Berlin is the largest church in the city, and it serves as a vital center for the Protestant church of Germany. Reaching out well beyond the borders of the parish and of Berlin, the cathedral attracts thousands of visitors, year after year, from Germany and abroad."
msgid "This romantic fairytale fortress, with all its many towers, domes and wings, is reflected in the waters of Lake Schwerin. It was completed in 1857 and symbolized the powerful dynasty of its founder, Friedrich Franz II."
msgid "The long, high-ceilinged brick structure was the throne hall of the Roman emperor until the destruction of the city by Germanic tribes. The invaders built a settlement inside the roofless ruin. In the 12th century, the apse was converted into a tower to accommodate the Archbishop of Trier."
msgid "Worms Cathedral (Wormser Dom) also known as the Cathedral of St Peter is a Romanesque cathedral in the German city of Worms. A sandstone structure with distinctive conical towers, Worms Cathedral was constructed in phases throughout the twelfth century and mostly completed by 1181."
msgid "Situated on Point Loma in San Diego, California, Cabrillo National Monument commemorates the first European to land on the West Coast of the United States, Juan Rodriguez Cabrillo. Portuguese by birth, Cabrillo carried the Spanish flag in his conquests of the New World. He arrived at San Diego Bay in September 1542, three months after departing from Barra de Navidad on the west coast of Mexico."
msgid "The stoic red ruins of Canyon de Chelly in northeastern Arizona are at once part of the National Park Service and the Navajo Nation, having been established as a national monument in 1931. A number of important early Native American sites are preserved in the nearly 84,000 acres of parkland, and Canyon de Chelly also offers an array of Southwestern geological formations, including Spider Rock, an 800-foot-tall sandstone spire that rises eerily from the bottom of the canyon floor."
msgid "Set on more than 20 acres in St. Augustine, Florida, the Castillo de San Marcos was completed as the city's defensive fort in 1695, when Florida was still a Spanish territory. Constructed out of the rare coquina limestone, the star-shaped Castillo also is the oldest masonry fort in the country."
msgid "This round, sandstone fort sitting at the bottom of Manhattan Island predates Ellis Island by about 50 years as the first U.S. immigration checkpoint. Castle Clinton (nps.gov/cacl) was originally built as a fort to protect New York from a British invasion during the War of 1812, and was dedicated as a national monument in 1946."
msgid "The George Washington Birthplace National Monument is in Westmoreland County, Virginia, United States. Originally settled by John Washington, George Washington's great-grandfather, George Washington was born here on February 22, 1732. He lived here until age three, returning later as a teenager."
msgid "Built in white stone with 36 iconic columns, The Lincoln Memorial is one of the most recognized structures in the United States. The memorial is at the west end of the National Mall, in West Potomac Park, and is an example in Neoclassical architecture. It features a solitary, 19-foot-tall statue of Abraham Lincoln sitting in contemplation, which is flanked on both side chambers with inscriptions of Lincoln’s Second Inaugural Address and arguably his most famous speech, the Gettysburg Address."
msgid "Mt. Rushmore stands as a shrine of democracy, a monument and memorial to George Washington, this country's birth, growth and ideals. Mount Rushmore symbolizes the greatness of this nation through the greatness of its leaders. The epic sculpture of Mount Rushmore depicts the faces of four exalted American presidents that symbolize this nation's rich history, rugged determination and lasting achievements."
msgid "Navajo National Monument is a National Monument located within the northwest portion of the Navajo Nation territory in northern Arizona, which was established to preserve three-well preserved cliff dwellings of the Ancestral Puebloan People: Keet Seel (Kitsʼiil), Betatakin (Bitátʼahkin), and Inscription House (Tsʼah Biiʼ Kin). The monument is high on the Shonto plateau, overlooking the Tsegi Canyon system, west of Kayenta, Arizona. It features a visitor center with a museum, two short self-guided mesa top trails, two small campgrounds, and a picnic area. Rangers guide visitors on free tours of the Keet Seel and Betatakin cliff dwellings. The Inscription House site, further west, is currently closed to public access."
msgid "Perhaps the best-known monument and symbol of the United States is the Statue of Liberty, which sits on its own tiny island in New York City. The statue was a gift from the people of France and was dedicated in October 1886."
msgid "Originally built as a defensive structure following the War of 1812, it was at this oceanfront fortification in Charleston Harbor, South Carolina, that the first shots of the Civil War were fired. Inside Fort Sumter, a number of exhibits offer perspectives on U.S. history, particularly the divisions between North and South that eventually resulted in the war."
msgid "The Great Pyramid of Giza is also known as the Pyramid of Khufu or the Pyramid of Cheops. It is considered to be the oldest of all the Seven Wonders of the Ancient World. It is also the largest of all the three pyramids in the Giza. It is situated in Giza Necropolis of Egypt. The initial construction has been started by Egyptian Pharaoh Khufu then it was continued by his son Khafre and finally completed by Menkaure. It took almost 20 years to build the pyramid and approximately 2 million blocks of stone has been used in the construction. The height of the pyramid is approximately 139 meters making it the highest pyramid of Egypt."
msgid "The Bent Pyramid located at Dahshur was the second pyramid built by pharaoh Sneferu. Mysteriously, this true pyramid rises from the desert at an angle of 55 degrees and then suddenly changes to a more gradual angle of 43 degrees. One theory holds that due to the steepness of the original angle the weight to be added above the inner chambers and passageways became too large, forcing the builders to adopt a shallower angle. Today, the Bent Pyramid is the only pyramid in Egypt of which the outer casing of polished limestone is still largely intact."
msgid "Five miles south of Saqqara in Egypt stands the mysterious tower-like pyramid of Meidum, which today scarcely resembles a typical pyramid at all. The pyramid was probably built during the reign of the 4th Dynasty pharaoh Sneferu, although it is believed by some that the pyramid may have been started by Sneferu’s predecessor, Huni. At some point during its construction the steps of the pyramid were filled with limestone encasing marking the first attempt by the ancient Egyptians at the construction of a true pyramid."
msgid "Red Pyramid was one of the finest and successful attempts by Pharaoh Sneferu in building world’s first ever smooth sided pyramid during the Ancient Egypt period. The height of the pyramid is 104 meters making it the world’s 4th largest pyramid in Egypt. The pyramid has been built with red limestone stones and hence the name. The local people of Egypt called it as el-heram el-watwaat meaning the Bat Pyramid."
"In level one, players enjoy exploring each animal on the screen. Click on the question mark, and learn about the animal, what it's name is, and what it looks like. Study well this information, because you will be tested in level 2!\n"
"\n"
"In level two, a random text prompt is displayed and you must click on the animal that matches the text. When you have matched all texts correctly, you win!\n"
msgid "Hedgehogs eat small animals, like frogs and insects, so many people keep them as useful pets. When in danger, they will curl up into a ball and stick up their coat of sharp spines."
msgid "The giraffe lives in Africa and is the tallest mammal in the world. Just their legs, which are usually 1.8 meters long, are taller than most humans!"
msgid "Being the largest of all the deers, moose eats as much as 25 kg a day. However, it's not easy, so sometimes moose has to stand on its hind legs to reach branches up to 4 meters!"
"In the first level, enjoy exploring music from around the world. Click on each suitcase to learn about the music from that area, and listen to a short sample. Study well, because there will be two games related to this information next!\n"
"\n"
"The second level is a matching game. You will hear a clip of music, and you must select the location that corresponds to that music. Click the play button if you'd like to hear the music again. You win the level when you have correctly matched all sound clips.\n"
"\n"
"The third level is also a matching game. You must select the location that matches the text description on the screen. You win the level when you have correctly matched all text prompts.\n"
msgid "Aboriginals were the first people to live in Australia. They sing and play instruments, like the didgeridoo. It is made from a log and can be up to five meters long!"
msgid "Music is a part of everyday life in Africa. African music features a great variety of drums, and they believe it is a sacred and magical instrument."
msgid "Music is a very important part of middle eastern culture. Specific songs are played to call worshipers to prayer. The lute is an instrument invented thousands of years ago and still in use today."
msgid "Taiko drumming comes from Japan. This type of drumming was originally used to scare enemies in battle. It is very loud, and performances are very exciting with crowds cheering and performers yelling!"
msgid "Folk music of this region is called celtic music, often incorporates a narrative poem or story. Typical instruments include bagpipes, fiddles, flutes, harps, and accordions."
msgid "Italy is famous for its Opera. Opera is a musical theater where actors tell a story by acting and singing. Opera singers, both male and female, learn special techniques to sing operas."
msgid "Mariachi is a famous type of Mexican music. It features guitars, trumpets, and violins. These bands play for many occasions, including weddings and parties."
msgid "USA also has a wide variety of musical genres, but perhaps it is most famous for rock n' roll music. This music features vocalists, guitars, and drums."
msgid "Find the date 2 months, 1 week and 8 days before 7 April."
msgstr ""
#. Activity title
#. +> trunk5 stable5
#: activities/followline/ActivityInfo.qml:27
msgctxt "ActivityInfo|"
msgid "Control the hose-pipe"
msgstr ""
#. Help title
#. +> trunk5 stable5
#: activities/followline/ActivityInfo.qml:29
msgctxt "ActivityInfo|"
msgid "The fireman needs to stop the fire, but the hose is blocked."
msgstr ""
#. Help goal
#. +> trunk5 stable5
#: activities/followline/ActivityInfo.qml:32
msgctxt "ActivityInfo|"
msgid "Fine motor coordination"
msgstr ""
#. Help manual
#. +> trunk5 stable5
#: activities/followline/ActivityInfo.qml:36
msgctxt "ActivityInfo|"
msgid "Move the mouse or your finger over the lock which is represented as a red part in the hose-pipe. This will move it, bringing it, part by part, up to the fire. Be careful, if you move off the hose, the lock will go backward."
msgstr ""
#. Activity title
#. +> trunk5 stable5
#: activities/football/ActivityInfo.qml:27
msgctxt "ActivityInfo|"
msgid "The football game"
msgstr ""
#. Help title
#. +> trunk5 stable5
#: activities/football/ActivityInfo.qml:29
msgctxt "ActivityInfo|"
msgid "Kick the ball into the goal"
msgstr ""
#. Help goal
#. +> trunk5 stable5
#: activities/football/ActivityInfo.qml:32
msgctxt "ActivityInfo|"
msgid "Kick the ball behind the goal keeper on the right"
msgstr ""
#. Help manual
#. +> trunk5 stable5
#: activities/football/ActivityInfo.qml:36
msgctxt "ActivityInfo|"
msgid "Drag a line from the ball, to set its speed and direction."
msgstr ""
#. Activity title
#. +> trunk5 stable5
#: activities/geo-country/ActivityInfo.qml:31
msgctxt "ActivityInfo|"
msgid "Locate the region"
msgstr ""
#. Help title
#. +> trunk5 stable5
#: activities/geo-country/ActivityInfo.qml:33
msgctxt "ActivityInfo|"
msgid "Drag and Drop the regions to redraw the whole country"
msgstr ""
#. +> trunk5 stable5
#: activities/geo-country/ActivityInfo.qml:41
msgctxt "ActivityInfo|"
msgid "The map of Germany comes from Wikipedia and is released under the GNU Free Documentation License. Olaf Ronneberger and his children Lina and Julia Ronneberger created the German level."
msgid "If you have a keyboard you can use the arrow keys to move and hit space to swallow a number. With a mouse you can click on the block next to your position to move and click again to swallow the number. With a touch screen you can do like with a mouse or swipe anywhere in the direction you want to move and tap to swallow the number."
msgid "The factors of a number are all the numbers that divide that number evenly. For example, the factors of 6 are 1, 2, 3 and 6. 4 is not a factor of 6 because 6 cannot be divided into 4 equal pieces. If one number is a multiple of a second number, then the second number is a factor of the first number. You can think of multiples as families, and factors are the people in those families. So 1, 2, 3 and 6 all fit into the 6 family, but 4 belongs to another family."
msgid "The multiples of a number are all the numbers that are equal to the original number times another number. For example, 24, 36, 48 and 60 are all multiples of 12. 25 is not a multiple of 12 because there isn't any number that can be multiplied by 12 to get 25. If one number is a factor of a second number, then the second number is a multiple of the first number. Again, you can think of multiples as families, and factors are the people who belong to those families. The factor 5, has parents 10, grandparents 15, great-grandparents 20, great-great-grandparents 25, and every extra step of 5 is another great- in front! But the number 5 does not belong in the 8 or 23 families. You can't fit any number of 5s into 8 or 23 with nothing left over. So 8 isn't a multiple of 5, nor is 23. Only 5, 10, 15, 20, 25 ... are multiples (or families or steps) of 5."
msgstr ""
#. Activity title
#. +> trunk5 stable5
#: activities/gnumch-primes/ActivityInfo.qml:28
msgctxt "ActivityInfo|"
msgid "Gnumch Primes"
msgstr ""
#. Help title
#. +> trunk5 stable5
#: activities/gnumch-primes/ActivityInfo.qml:30
msgctxt "ActivityInfo|"
msgid "Guide the Number Muncher to all the prime numbers."
msgstr ""
#. Help goal
#. +> trunk5 stable5
#: activities/gnumch-primes/ActivityInfo.qml:33
msgctxt "ActivityInfo|"
msgid "Learn about prime numbers."
msgstr ""
#. Help manual
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/gnumch-primes/ActivityInfo.qml:37
msgctxt "ActivityInfo|"
msgid "Prime numbers are numbers that are only divisible by themselves and 1. For example, 3 is a prime number, but 4 isn't (because 4 is divisible by 2). You can think of prime numbers as very small families: they only ever have two people in them! Only themselves and 1. You can't fit any other numbers into them with nothing left over. 5 is one of these lonely numbers (only 5 × 1 = 5), but you can see that 6 has 2 and 3 in its family as well (6 × 1 = 6, 2 × 3 = 6). So 6 is not a prime number."
msgstr ""
-#. +> stable5
-#: activities/gnumch-primes/ActivityInfo.qml:32
-msgctxt "ActivityInfo|"
-msgid "Prime numbers are numbers that are only divisible by themselves and 1. For example, 3 is a prime number, but 4 isn't (because 4 is divisible by 2). You can think of prime numbers as very small families: they only ever have two people in them! Only themselves and 1. You can't fit any other numbers into them with nothing left over. 5 is one of these lonely numbers (only 5 × 1 = 5), but you can see that 6 has 2 and 3 in its family as well (6 × 1 = 6, 2 ×3 = 6). So 6 is not a prime number."
-msgstr ""
-
#. Activity title
#. +> trunk5 stable5
#: activities/graph-coloring/ActivityInfo.qml:27
msgctxt "ActivityInfo|"
msgid "Graph Coloring"
msgstr ""
#. Help title
#. +> trunk5 stable5
#: activities/graph-coloring/ActivityInfo.qml:29
msgctxt "ActivityInfo|"
msgid "Color the graph so that no two adjacent nodes have the same color."
msgstr ""
#. Help goal
#. +> trunk5 stable5
#: activities/graph-coloring/ActivityInfo.qml:32
msgctxt "ActivityInfo|"
msgid "Learn to distinguish between different colors/shapes and learn about relative positions."
msgstr ""
#. Help prerequisite
#. +> trunk5 stable5
#: activities/graph-coloring/ActivityInfo.qml:34
msgctxt "ActivityInfo|"
msgid "Ability to distinguish different colors/shapes, sense of positions"
msgid "Guess the algebraic expression and drag the tiles to get a result equal to the Guesscount."
msgstr ""
#. Help goal
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/guesscount/ActivityInfo.qml:37
msgctxt "ActivityInfo|"
msgid "To learn algebra"
msgstr ""
-#. +> stable5
-#: activities/guesscount/ActivityInfo.qml:34
-msgctxt "ActivityInfo|"
-msgid "To teach algebra"
-msgstr ""
-
#. Help prerequisite
#. +> trunk5 stable5
#: activities/guesscount/ActivityInfo.qml:39
msgctxt "ActivityInfo|"
msgid "knowledge of arithmetic operations"
msgstr ""
#. +> trunk5 stable5
#: activities/guesscount/Admin.qml:43
#, qt-format
msgctxt "Admin|"
msgid "Level %1"
msgstr ""
#. +> trunk5 stable5
#: activities/guesscount/Admin.qml:99
msgctxt "Admin|"
msgid "empty"
msgstr ""
#. +> trunk5 stable5
#: activities/guesscount/guesscount.js:118
msgctxt "guesscount|"
msgid "result is not positive integer"
msgstr ""
#. +> trunk5 stable5
#: activities/guesscount/guesscount.js:120
msgctxt "guesscount|"
msgid "result is not an integer"
msgstr ""
#. +> trunk5 stable5
#: activities/guesscount/Guesscount.qml:132
#, qt-format
msgctxt "Guesscount|"
msgid "%1/%2"
msgstr ""
#. +> trunk5 stable5
#: activities/guesscount/Guesscount.qml:159
#, qt-format
msgctxt "Guesscount|"
msgid "Guesscount: %1"
msgstr ""
#. +> trunk5 stable5
#: activities/guesscount/Guesscount.qml:217
msgctxt "Guesscount|"
msgid "Admin"
msgstr ""
#. +> trunk5 stable5
#: activities/guesscount/Guesscount.qml:218
msgctxt "Guesscount|"
msgid "BuiltIn"
msgstr ""
#. +> trunk5 stable5
#: activities/guesscount/Guesscount.qml:233
msgctxt "Guesscount|"
msgid "Select your mode"
msgstr ""
#. +> trunk5 stable5
#: activities/guesscount/Guesscount.qml:257
msgctxt "Guesscount|"
msgid "Selected"
msgstr ""
#. +> trunk5 stable5
#: activities/guesscount/Guesscount.qml:257
msgctxt "Guesscount|"
msgid "Not Selected"
msgstr ""
#. +> trunk5 stable5
#: activities/guesscount/OperandRow.qml:51
msgctxt "OperandRow|"
msgid "Numbers"
msgstr ""
#. +> trunk5 stable5
#: activities/guesscount/OperatorRow.qml:55
msgctxt "OperatorRow|"
msgid "Operators"
msgstr ""
#. Activity title
#. +> trunk5 stable5
#: activities/guessnumber/ActivityInfo.qml:27
msgctxt "ActivityInfo|"
msgid "Guess a number"
msgstr ""
#. Help title
#. +> trunk5 stable5
#: activities/guessnumber/ActivityInfo.qml:29
msgctxt "ActivityInfo|"
msgid "Help Tux escape the cave. Tux hides a number for you to find."
msgstr ""
#. Help prerequisite
#. +> trunk5 stable5
#: activities/guessnumber/ActivityInfo.qml:34
msgctxt "ActivityInfo|"
msgid "Numbers from 1 to 1000 for the last level."
msgstr ""
#. Help manual
#. +> trunk5 stable5
#: activities/guessnumber/ActivityInfo.qml:36
msgctxt "ActivityInfo|"
msgid "Read the instructions that give you the range of the number to find. Enter a number in the top right entry box. You will be told if your number is higher or lower. Then enter another number. The distance between Tux and the escape area on the right represents how far you are from the correct number. If Tux is over or under the escape area, it means your number is over or under the correct number."
msgstr ""
#. +> trunk5 stable5
#: activities/guessnumber/guessnumber.js:74
#, qt-format
msgctxt "guessnumber|"
msgid "Guess a number between 1 and %1"
msgstr ""
#. +> trunk5 stable5
#: activities/guessnumber/guessnumber.js:99
#: activities/guessnumber/guessnumber.js:103
msgctxt "guessnumber|"
msgid "Number too high"
msgstr ""
#. +> trunk5 stable5
#: activities/guessnumber/guessnumber.js:106
msgctxt "guessnumber|"
msgid "Number too low"
msgstr ""
#. +> trunk5 stable5
#: activities/guessnumber/guessnumber.js:110
msgctxt "guessnumber|"
msgid "Number found!"
msgstr ""
#. Activity title
#. +> trunk5 stable5
#: activities/hangman/ActivityInfo.qml:27
msgctxt "ActivityInfo|"
msgid "The classic hangman game"
msgstr ""
#. Help title
#. +> trunk5 stable5
#: activities/hangman/ActivityInfo.qml:29
msgctxt "ActivityInfo|"
msgid "Guess the letters of the given word. To help you, on every wrong try, a part of the image representing the word will be revealed."
msgstr ""
#. Help goal
#. +> trunk5 stable5
#: activities/hangman/ActivityInfo.qml:31
msgctxt "ActivityInfo|"
msgid "This is a good exercise to improve reading and spelling skills."
msgstr ""
#. Help manual
#. +> trunk5 stable5
#: activities/hangman/ActivityInfo.qml:36
msgctxt "ActivityInfo|"
msgid "You can enter the letters using the virtual keyboard on the screen or with the real keyboard."
msgstr ""
#. +> trunk5 stable5
#: activities/hangman/hangman.js:219
#, qt-format
msgctxt "hangman|"
msgid "Attempted: %1"
msgstr ""
#. +> trunk5 stable5
#: activities/hangman/Hangman.qml:270
msgctxt "Hangman|"
msgid "Select your locale"
msgstr ""
#. +> trunk5 stable5
#: activities/hangman/Hangman.qml:276
msgctxt "Hangman|"
msgid "Display image to find as hint"
msgstr ""
#. +> trunk5 stable5
#: activities/hangman/Hangman.qml:442
msgctxt "Hangman|"
msgid "We are sorry, we don't have yet a translation for your language."
msgstr ""
#. +> trunk5 stable5
#: activities/hangman/Hangman.qml:443
#, qt-format
msgctxt "Hangman|"
msgid "GCompris is developed by the KDE community, you can translate GCompris by joining a translation team on <a href=\"%2\">%2</a>"
msgstr ""
#. +> trunk5 stable5
#: activities/hangman/Hangman.qml:445
msgctxt "Hangman|"
msgid "We switched to English for this activity but you can select another language in the configuration dialog."
msgstr ""
#. Activity title
#. +> trunk5 stable5
#: activities/hanoi/ActivityInfo.qml:27
msgctxt "ActivityInfo|"
msgid "Simplified Tower of Hanoi"
msgstr ""
#. Help title
#. +> trunk5 stable5
#: activities/hanoi/ActivityInfo.qml:29
msgctxt "ActivityInfo|"
msgid "Reproduce the given tower"
msgstr ""
#. Help goal
#. +> trunk5 stable5
#: activities/hanoi/ActivityInfo.qml:32
msgctxt "ActivityInfo|"
msgid "Reproduce the tower on the right in the empty space on the left"
msgstr ""
#. Help manual
#. +> trunk5 stable5
#: activities/hanoi/ActivityInfo.qml:36
msgctxt "ActivityInfo|"
msgid "Drag and Drop one top piece at a time, from one peg to another, to reproduce the tower on the right in the empty space on the left."
msgstr ""
#. +> trunk5 stable5
#: activities/hanoi/ActivityInfo.qml:37
msgctxt "ActivityInfo|"
msgid "Concept taken from EPI games."
msgstr ""
#. Activity title
#. +> trunk5 stable5
#: activities/hanoi_real/ActivityInfo.qml:27
msgctxt "ActivityInfo|"
msgid "The Tower of Hanoi"
msgstr ""
#. Help title
#. +> trunk5 stable5
#: activities/hanoi_real/ActivityInfo.qml:29
msgctxt "ActivityInfo|"
msgid "Reproduce the tower on the right side"
msgstr ""
#. Help goal
#. +> trunk5 stable5
#: activities/hanoi_real/ActivityInfo.qml:32
msgctxt "ActivityInfo|"
msgid ""
"The object of the game is to move the entire stack to another peg, obeying the following rules:\n"
" only one disc may be moved at a time\n"
" no disc may be placed atop a smaller disc\n"
msgstr ""
#. Help manual
#. +> trunk5 stable5
#: activities/hanoi_real/ActivityInfo.qml:39
msgctxt "ActivityInfo|"
msgid "Drag and drop the top pieces only from one peg to another, to reproduce the initial left side tower on the right peg."
msgstr ""
#. +> trunk5 stable5
#: activities/hanoi_real/ActivityInfo.qml:40
msgctxt "ActivityInfo|"
msgid "The puzzle was invented by the French mathematician Edouard Lucas in 1883. There is a legend about a Hindu temple whose priests were constantly engaged in moving a set of 64 discs according to the rules of the Tower of Hanoi puzzle. According to the legend, the world would end when the priests finished their work. The puzzle is therefore also known as the Tower of Brahma puzzle. It is not clear whether Lucas invented this legend or was inspired by it. (source Wikipedia: http://en.wikipedia.org/wiki/Tower_of_hanoi)"
msgstr ""
#. +> trunk5 stable5
#: activities/hanoi_real/HanoiReal.qml:85
msgctxt "HanoiReal|"
msgid "Move the entire stack to the right peg, one disc at a time."
msgstr ""
#. +> trunk5 stable5
#: activities/hanoi_real/HanoiReal.qml:86
msgctxt "HanoiReal|"
msgid "Build the same tower in the empty area as the one you see on the right-hand side"
msgstr ""
#. Activity title
#. +> trunk5 stable5
#: activities/hexagon/ActivityInfo.qml:27
msgctxt "ActivityInfo|"
msgid "Hexagon"
msgstr ""
#. Help title
#. +> trunk5 stable5
#: activities/hexagon/ActivityInfo.qml:29
msgctxt "ActivityInfo|"
msgid "Find the strawberry by clicking on the blue fields"
msgstr ""
#. Help goal
#. +> trunk5 stable5
#: activities/hexagon/ActivityInfo.qml:32
msgctxt "ActivityInfo|"
msgid "Logic-training activity"
msgstr ""
#. Help manual
#. +> trunk5 stable5
#: activities/hexagon/ActivityInfo.qml:36
msgctxt "ActivityInfo|"
msgid "Try to find the strawberry under the blue fields. The fields become redder as you get closer."
msgid "Maintain the spaceship in the middle without crashing into the planets or the asteroids"
msgstr ""
#. Help manual
#. +> trunk5 stable5
#: activities/intro_gravity/ActivityInfo.qml:36
msgctxt "ActivityInfo|"
msgid "Follow the instructions when you run the activity."
msgstr ""
#. +> trunk5 stable5
#: activities/intro_gravity/IntroGravity.qml:124
msgctxt "IntroGravity|"
msgid "Gravity is universal and Newton's law of universal gravitation extends gravity beyond earth. This force of gravitational attraction is directly dependent upon the masses of both objects and inversely proportional to the square of the distance that separates their centers."
msgstr ""
#. +> trunk5 stable5
#: activities/intro_gravity/IntroGravity.qml:128
msgctxt "IntroGravity|"
msgid "Since the gravitational force is directly proportional to the mass of both interacting objects, more massive objects will attract each other with a greater gravitational force. So as the mass of either object increases, the force of gravitational attraction between them also increases"
msgstr ""
#. +> trunk5 stable5
#: activities/intro_gravity/IntroGravity.qml:132
msgctxt "IntroGravity|"
msgid "But this force is inversely proportional to the square of the separation distance between the two interacting objects, more separation distance will result in weaker gravitational forces."
msgstr ""
#. +> trunk5 stable5
#: activities/intro_gravity/IntroGravity.qml:135
msgctxt "IntroGravity|"
msgid "Your goal is to let Tux's spaceship move by changing the mass of its surrounding planets. Don't get too close to the planets or you will crash on them. The arrow indicates the direction of the force on your ship."
msgstr ""
#. +> trunk5 stable5
#: activities/intro_gravity/IntroGravity.qml:139
msgctxt "IntroGravity|"
msgid "Avoid the asteroid and join the space shuttle to win."
msgstr ""
#. Activity title
#. +> trunk5 stable5
#: activities/land_safe/ActivityInfo.qml:27
msgctxt "ActivityInfo|"
msgid "Land Safe"
msgstr ""
#. Help title
#. +> trunk5 stable5
#: activities/land_safe/ActivityInfo.qml:29
msgctxt "ActivityInfo|"
msgid "Understanding acceleration due to gravity."
msgstr ""
#. Help goal
#. +> trunk5 stable5
#: activities/land_safe/ActivityInfo.qml:32
msgctxt "ActivityInfo|"
msgid "Pilot the spaceship towards the green landing area."
msgstr ""
#. Help manual
#. +> trunk5 stable5
#: activities/land_safe/ActivityInfo.qml:36
msgctxt "ActivityInfo|"
msgid ""
"Acceleration due to gravity experienced by the spaceship is directly proportional to the mass of the planet and inversely proportional to the square of the distance from the center of the planet. Thus, with every planet the acceleration will differ and as the spaceship comes closer and closer to the planet the acceleration increases.\n"
"\n"
"Use the up/down keys to control the thrust and the right/left keys to control direction. On touch screens you can control the rocket through the corresponding on-screen buttons.\n"
"\n"
"The accelerometer on the right border shows your rocket's overall vertical acceleration including gravitational force. In the upper green area of the accelerometer your acceleration is higher than the gravitational force, in the lower red area it's lower, and on the blue baseline in the yellow middle area the two forces cancel each other out.\n"
"\n"
"In higher levels, you can use the right/left keys to rotate the spaceship. By rotating the spaceship you can trigger an acceleration in non-vertical direction using the up/down keys.\n"
"\n"
"The landing platform is green if your speed is fine for a safe landing."
"Use the up and down keys to control the thrust.<br/>"
"Use the right and left keys to control direction.<br/>"
"You must drive Tux's ship towards the landing platform.<br/>"
"The landing platform turns green when the velocity is safe to land."
msgstr ""
#. +> trunk5 stable5
#: activities/land_safe/land_safe.js:100
msgctxt "land_safe|"
msgid ""
"The up and down keys control the thrust of the rear engine.<br/>"
"The right and left keys now control the rotation of the ship.<br/>"
"To move the ship in horizontal direction you must first rotate and then accelerate it."
msgstr ""
#. +> trunk5 stable5
#: activities/land_safe/LandSafe.qml:574
#, qt-format
msgctxt "LandSafe|"
msgid "Fuel: %1"
msgstr ""
#. +> trunk5 stable5
#: activities/land_safe/LandSafe.qml:584
#, qt-format
msgctxt "LandSafe|"
msgid "Altitude: %1"
msgstr ""
#. +> trunk5 stable5
#: activities/land_safe/LandSafe.qml:595
#, qt-format
msgctxt "LandSafe|"
msgid "Velocity: %1"
msgstr ""
#. +> trunk5 stable5
#: activities/land_safe/LandSafe.qml:608
#, qt-format
msgctxt "LandSafe|"
msgid "Acceleration: %1"
msgstr ""
#. +> trunk5 stable5
#: activities/land_safe/LandSafe.qml:634
#, qt-format
msgctxt "LandSafe|"
msgid "Gravity: %1"
msgstr ""
#. Activity title
#. +> trunk5 stable5
#: activities/lang/ActivityInfo.qml:33
msgctxt "ActivityInfo|"
msgid "Enrich your vocabulary"
msgstr ""
#. Help title
#. +> trunk5 stable5
#: activities/lang/ActivityInfo.qml:35
msgctxt "ActivityInfo|"
msgid "Complete language learning activities."
msgstr ""
#. Help goal
#. +> trunk5 stable5
#: activities/lang/ActivityInfo.qml:38
msgctxt "ActivityInfo|"
msgid "Enrich your vocabulary in your native language or in a foreign one."
msgstr ""
#. Help manual
#. +> trunk5 stable5
#: activities/lang/ActivityInfo.qml:42
msgctxt "ActivityInfo|"
msgid ""
"Review a set of words. Each word is shown with a voice, a text and an image.<br/>"
"When done, you are suggested an exercise in which, given the voice, you must find the right word. In the configuration, you can select the language you want to learn."
msgstr ""
#. +> trunk5 stable5
#: activities/lang/ActivityInfo.qml:45
msgctxt "ActivityInfo|"
msgid ""
"The images and voices come from the Art4Apps project: http://www.art4apps.org/.<br>"
"You can also access this activity online on http://gcompris.net/activity/lang."
msgstr ""
#. +> trunk5 stable5
#: activities/lang/Lang.qml:143
msgctxt "Lang|"
msgid "We are sorry, we don't have yet a translation for your language."
msgstr ""
#. +> trunk5 stable5
#: activities/lang/Lang.qml:144
#, qt-format
msgctxt "Lang|"
msgid "GCompris is developed by the KDE community, you can translate GCompris by joining a translation team on <a href=\"%2\">%2</a>"
msgstr ""
#. +> trunk5 stable5
#: activities/lang/Lang.qml:146
msgctxt "Lang|"
msgid "We switched to English for this activity but you can select another language in the configuration dialog."
msgid "Determine if a hand is a right or a left hand"
msgstr ""
#. Help goal
#. +> trunk5 stable5
#: activities/leftright/ActivityInfo.qml:32
msgctxt "ActivityInfo|"
msgid "Distinguish right and left hands from different points of view. Spatial representation"
msgstr ""
#. Help manual
#. +> trunk5 stable5
#: activities/leftright/ActivityInfo.qml:36
msgctxt "ActivityInfo|"
msgid "You can see a hand: is it a left hand or a right hand? Click on the left button, or the right button depending on the displayed hand."
msgstr ""
#. +> trunk5 stable5
#: activities/leftright/Leftright.qml:146
msgctxt "Leftright|"
msgid "Left hand"
msgstr ""
#. +> trunk5 stable5
#: activities/leftright/Leftright.qml:159
msgctxt "Leftright|"
msgid "Right hand"
msgstr ""
#. Activity title
#. +> trunk5 stable5
#: activities/letter-in-word/ActivityInfo.qml:27
msgctxt "ActivityInfo|"
msgid "Letter in which word"
msgstr ""
#. Help title
#. +> trunk5 stable5
#: activities/letter-in-word/ActivityInfo.qml:29
msgctxt "ActivityInfo|"
msgid "A letter is written and/or spoken. Some words are displayed, the children must find the word or the words in which this letter appears."
msgstr ""
#. Help goal
#. +> trunk5 stable5
#: activities/letter-in-word/ActivityInfo.qml:32
msgctxt "ActivityInfo|"
msgid "Select all the words which contain the spoken letter."
msgstr ""
#. Help prerequisite
#. +> trunk5 stable5
#: activities/letter-in-word/ActivityInfo.qml:34
msgctxt "ActivityInfo|"
msgid "spellings, letter recognition"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/letter-in-word/LetterInWord.qml:126
msgctxt "LetterInWord|"
msgid "All words"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/letter-in-word/LetterInWord.qml:134
msgctxt "LetterInWord|"
msgid "Only 5 words"
msgstr ""
#. +> trunk5 stable5
#: activities/letter-in-word/LetterInWord.qml:146
msgctxt "LetterInWord|"
msgid "Select your locale"
msgstr ""
#. +> trunk5 stable5
#: activities/letter-in-word/LetterInWord.qml:392
msgctxt "LetterInWord|"
msgid "We are sorry, we don't have yet a translation for your language."
msgstr ""
#. +> trunk5 stable5
#: activities/letter-in-word/LetterInWord.qml:393
#, qt-format
msgctxt "LetterInWord|"
msgid "GCompris is developed by the KDE community, you can translate GCompris by joining a translation team on <a href=\"%2\">%2</a>"
msgstr ""
#. +> trunk5 stable5
#: activities/letter-in-word/LetterInWord.qml:395
msgctxt "LetterInWord|"
msgid "We switched to English for this activity but you can select another language in the configuration dialog."
msgstr ""
#. Activity title
#. +> trunk5 stable5
#: activities/lightsoff/ActivityInfo.qml:27
msgctxt "ActivityInfo|"
msgid "Lights Off"
msgstr ""
#. Help title
#. ----------
#. Help goal
#. +> trunk5 stable5
#: activities/lightsoff/ActivityInfo.qml:29
#: activities/lightsoff/ActivityInfo.qml:32
msgctxt "ActivityInfo|"
msgid "The aim is to switch off all the lights."
msgstr ""
#. Help manual
#. +> trunk5 stable5
#: activities/lightsoff/ActivityInfo.qml:36
msgctxt "ActivityInfo|"
msgid "The effect of pressing a button is to toggle the state of that button, and of its immediate vertical and horizontal neighbors. The sun and the color of the sky depend on the number of clicks needed to solve the puzzle. If you click on Tux, the solution is shown."
msgstr ""
#. +> trunk5 stable5
#: activities/lightsoff/ActivityInfo.qml:37
msgctxt "ActivityInfo|"
msgid "The solver algorithm is described on Wikipedia. To know more about the Lights Off game: <http://en.wikipedia.org/wiki/Lights_Out_(game)>"
msgstr ""
#. Activity title
#. +> trunk5 stable5
#: activities/louis-braille/ActivityInfo.qml:27
msgctxt "ActivityInfo|"
msgid "The History of Louis Braille"
msgstr ""
#. Help title
#. +> trunk5 stable5
#: activities/louis-braille/ActivityInfo.qml:29
msgctxt "ActivityInfo|"
msgid "Review the major dates of the inventor of the Braille System"
msgstr ""
#. Help manual
#. +> trunk5 stable5
#: activities/louis-braille/ActivityInfo.qml:36
msgctxt "ActivityInfo|"
msgid "Read the history of Louis Braille, his biography, and the invention of the Braille system. Click on the previous and next buttons to move between the story pages. At the end, arrange the sequence in chronological order."
msgid "Charles Barbier, a French soldier, visited his school and shared his invention of night writing, a code of 12 raised dots to share information on battlefields."
msgid "Look at the magician, he tells the number of stars that are under his magic hat. Then, click on the hat to open it. A few stars escape. Click again on the hat to close it. You have to count how many are still under the hat. Click on the bottom area to answer."
msgstr ""
#. +> trunk5 stable5
#: activities/magic-hat-minus/MagicHat.qml:99
msgctxt "MagicHat|"
msgid "Click on the hat to begin the game"
msgstr ""
#. The math operation
#. +> trunk5 stable5
#: activities/magic-hat-minus/MagicHat.qml:104
msgctxt "MagicHat|"
msgid "-"
msgstr ""
#. +> trunk5 stable5
#: activities/magic-hat-minus/MagicHat.qml:104
msgctxt "MagicHat|"
msgid "+"
msgstr ""
#. Help title
#. +> trunk5 stable5
#: activities/magic-hat-plus/ActivityInfo.qml:29
msgctxt "ActivityInfo|"
msgid "Count how many items are under the magic hat"
msgid "Click on the hat to open or close it. Under the hat, how many stars can you see moving around? Count carefully. Click in the bottom-right area to input your answer."
msgstr ""
#. Activity title
#. +> trunk5 stable5
#: activities/maze/ActivityInfo.qml:27
msgctxt "ActivityInfo|"
msgid "Maze"
msgstr ""
#. Help title
#. +> trunk5 stable5
#: activities/maze/ActivityInfo.qml:29
msgctxt "ActivityInfo|"
msgid "Help Tux get out of this maze"
msgstr ""
#. Help manual
#. +> trunk5 stable5
#: activities/maze/ActivityInfo.qml:36
#: activities/mazerelative/ActivityInfo.qml:36
msgctxt "ActivityInfo|"
msgid "Use the arrow keys or swipe the touch screen to move Tux up to the door."
msgstr ""
#. +> trunk5 stable5
#: activities/maze/ActivityInfo.qml:37
#: activities/mazeinvisible/ActivityInfo.qml:37
#: activities/mazerelative/ActivityInfo.qml:38
msgctxt "ActivityInfo|"
msgid "At the first levels, Tux walks comfortably, one step on each move request, through the maze."
msgstr ""
#. +> trunk5 stable5
#: activities/maze/ActivityInfo.qml:38
#: activities/mazeinvisible/ActivityInfo.qml:38
#: activities/mazerelative/ActivityInfo.qml:39
msgctxt "ActivityInfo|"
msgid "For larger mazes, there is a special walking mode, called \"run-fast-mode\". If this run-fast-mode is enabled, Tux will run all the way automatically until he reaches a fork and you have to decide which way to go further."
msgstr ""
#. +> trunk5 stable5
#: activities/maze/ActivityInfo.qml:39
#: activities/mazeinvisible/ActivityInfo.qml:39
#: activities/mazerelative/ActivityInfo.qml:40
msgctxt "ActivityInfo|"
msgid "You can see whether this mode is enabled or not, by looking at Tux's feet: If Tux is barefooted, \"run-fast-mode\" is disabled. And if he wears red sport shoes, \"run-fast-mode\" is enabled."
msgstr ""
#. +> trunk5 stable5
#: activities/maze/ActivityInfo.qml:40
#: activities/mazeinvisible/ActivityInfo.qml:40
#: activities/mazerelative/ActivityInfo.qml:41
msgctxt "ActivityInfo|"
msgid ""
"At higher levels, run-fast-mode will be enabled automatically. If you want to use this feature in earlier levels or want to disable it in advanced levels, click on the \"barefoot / sportshoe\"-icon in the upper left corner of the screen to toggle the run-fast-mode.\n"
"\t"
msgstr ""
#. +> trunk5 stable5
#: activities/maze/Maze.qml:325
msgctxt "Maze|"
msgid "Look at your position, then switch back to invisible mode to continue your moves"
msgstr ""
#. Activity title
#. +> trunk5 stable5
#: activities/mazeinvisible/ActivityInfo.qml:27
msgctxt "ActivityInfo|"
msgid "Invisible Maze"
msgstr ""
#. Help title
#. +> trunk5 stable5
#: activities/mazeinvisible/ActivityInfo.qml:29
msgctxt "ActivityInfo|"
msgid "Guide Tux out of the invisible maze"
msgstr ""
#. Help manual
#. +> trunk5 stable5
#: activities/mazeinvisible/ActivityInfo.qml:36
msgctxt "ActivityInfo|"
msgid "Use the arrow keys or swipe the touch screen to move Tux up to the door. Use the maze icon or the spacebar to switch between invisible and visible modes. Visible mode just gives you an indication of your position, like a map. You cannot move Tux in visible mode."
msgstr ""
#. Activity title
#. +> trunk5 stable5
#: activities/mazerelative/ActivityInfo.qml:27
msgctxt "ActivityInfo|"
msgid "Relative Maze"
msgstr ""
#. Help title
#. +> trunk5 stable5
#: activities/mazerelative/ActivityInfo.qml:29
msgctxt "ActivityInfo|"
msgid "Help Tux get out of this maze (Move is relative)"
msgstr ""
#. +> trunk5 stable5
#: activities/mazerelative/ActivityInfo.qml:37
msgctxt "ActivityInfo|"
msgid "In this maze, the move is relative (first person). Left and right are used to turn and up to go forward."
msgstr ""
#. Activity title
#. +> trunk5 stable5
#: activities/melody/ActivityInfo.qml:27
msgctxt "ActivityInfo|"
msgid "Melody"
msgstr ""
#. Help title
#. +> trunk5 stable5
#: activities/melody/ActivityInfo.qml:29
msgctxt "ActivityInfo|"
msgid "Reproduce a sound sequence"
msgstr ""
#. Help goal
#. +> trunk5 stable5
#: activities/melody/ActivityInfo.qml:32
msgctxt "ActivityInfo|"
msgid "Ear-training activity"
msgstr ""
#. Help prerequisite
#. +> trunk5 stable5
#: activities/melody/ActivityInfo.qml:34
msgctxt "ActivityInfo|"
msgid "Move and click the mouse"
msgstr ""
#. Help manual
#. +> trunk5 stable5
#: activities/melody/ActivityInfo.qml:36
msgctxt "ActivityInfo|"
msgid "Listen to the sound sequence played, and repeat it by clicking on the xylophone's bars. You can listen again by clicking on the repeat button."
msgid "You can see some cards, but you can't see what's on the other side of them. Each card is hiding the lower/uppercase of an alphabet, and you have to associate all the upper case letters with its lower case and vice versa. Tux teacher does the same."
msgid "You can see some cards, but you can't see what's on the other side of them. Each card is hiding the lower/uppercase of an alphabet, and you have to associate all the upper case letters with its lower case and vice versa."
"You can see some cards, but you can't see what's on the other side of them. Each card is hiding an operation, or the answer to it.\n"
"\n"
"In this game, these cards are hiding the two parts of an operation. You need to find the two parts of the operation, and bring them together again. Click on a card to see what number it's hiding, then try to find the other card that goes with it, to make a whole operation. You can only turn over two cards in one go, so you need to remember where the numbers are hiding, then you can match them when you find their other half. You're doing the job of the equals sign, and the numbers need you to put them together and make a proper equality. When you do that, both those cards disappear! When you've made them all disappear, found more than Tux, you've won the game!"
"You can see some cards, but you can't see what's on the other side of them. Each card is hiding an operation, or the answer to it.\n"
"\n"
"In this game, these cards are hiding the two parts of an operation. You need to find the two parts of the operation, and bring them together again. Click on a card to see what number it's hiding, then try to find the other card that goes with it, to make a whole operation. You can only turn over two cards in one go, so you need to remember where the numbers are hiding, then you can match them when you find their other half. You're doing the job of the equals sign, and the numbers need you to put them together and make a proper equality. When you do that, both those cards disappear! When you've made them all disappear, found all the operations, you've won the game!"
"You can see some cards, but you can't see what's on the other side of them. Each card is hiding an operation, or the answer to it.\n"
"\n"
"In this game, these cards are hiding the two parts of an operation. You need to find the two parts of the operation, and bring them together again. Click on a card to see what number it's hiding, then try to find the other card that goes with it, to make a whole operation. You can only turn over two cards in one go, so you need to remember where the numbers are hiding, then you can match them when you find their other half. You're doing the job of the equals sign, and the numbers need you to put them together and make a proper equality. When you do that, both those cards disappear! When you've made them all disappear, found more than Tux, and you've won the game!"
"You can see some cards, but you can't see what's on the other side of them. Each card is hiding an adding-up sum, or the answer to the sum.\n"
"An adding-up sum looks like this: 2 + 2 = 4\n"
"The numbers on one side of the equals sign (=) have to be the same as the number on the other side. So 2 (1, 2) and 2 more (3, 4) makes 4. Count aloud when you work this out, and count on your fingers, because the more ways you do something, the better you remember it. You can also use blocks, or buttons, or anything you can count. If you have lots of brothers and sisters, you can count them! Or the kids in your class at school. Sing counting songs. Count lots of things, for practice, and you'll be very good at adding-up!\n"
"\n"
"In this game, these cards are hiding the two parts of an adding-up sum (also called an addition sum). You need to find the two parts of the sum, and bring them together again. Click on a card to see what number it's hiding, then try to find the other card that goes with it, to make a whole sum. You can only turn over two cards in one go, so you need to remember where the numbers are hiding, then you can match them when you find their other half. You're doing the job of the equals sign, and the numbers need you to put them together and make a proper sum. When you do that, both those cards disappear! When you've made them all disappear, found more sums than Tux and you've won the game!"
msgstr ""
#. Activity title
#. +> trunk5 stable5
#: activities/memory-math-add/ActivityInfo.qml:27
msgctxt "ActivityInfo|"
msgid "Addition memory game"
msgstr ""
#. Help title
#. +> trunk5 stable5
#: activities/memory-math-add/ActivityInfo.qml:29
msgctxt "ActivityInfo|"
msgid "Turn the cards over to find two numbers which add up the same, until all the cards are gone."
msgstr ""
#. Help manual
#. +> trunk5 stable5
#: activities/memory-math-add/ActivityInfo.qml:36
msgctxt "ActivityInfo|"
msgid ""
"You can see some cards, but you can't see what's on the other side of them. Each card is hiding an adding-up sum, or the answer to the sum.\n"
"An adding-up sum looks like this: 2 + 2 = 4\n"
"The numbers on one side of the equals sign (=) have to be the same as the number on the other side. So 2 (1, 2) and 2 more (3, 4) makes 4. Count aloud when you work this out, and count on your fingers, because the more ways you do something, the better you remember it. You can also use blocks, or buttons, or anything you can count. If you have lots of brothers and sisters, you can count them! Or the kids in your class at school. Sing counting songs. Count lots of things, for practice, and you'll be very good at adding-up!\n"
"\n"
"In this game, these cards are hiding the two parts of an adding-up sum (also called an addition sum). You need to find the two parts of the sum, and bring them together again. Click on a card to see what number it's hiding, then try to find the other card that goes with it, to make a whole sum. You can only turn over two cards in one go, so you need to remember where the numbers are hiding, then you can match them when you find their other half. You're doing the job of the equals sign, and the numbers need you to put them together and make a proper sum. When you do that, both those cards disappear! When you've made them all disappear, found all the sums, you've won the game!"
"You can see some cards, but you can't see what's on the other side of them. Each card is hiding an operation, or the answer to it.\n"
"\n"
"In this game, these cards are hiding the two parts of an operation. You need to find the two parts of the operation, and bring them together again. Click on a card to see what number it's hiding, then try to find the other card that goes with it, to make a whole operation. You can only turn over two cards in one go, so you need to remember where the numbers are hiding, then you can match them when you find their other half. You're doing the job of the equals sign, and the numbers need you to put them together and make a proper equality. When you do that, both those cards disappear! When you've made them all disappear, found more than Tux and you've won the game!"
"You can see some cards, but you can't see what's on the other side of them. Each card is hiding an operation, or the answer to it.\n"
"\n"
"In this game, these cards are hiding the two parts of an operation. You need to find the two parts of the operation, and bring them together again. Click on a card to see what number it's hiding, then try to find the other card that goes with it, to make a whole operation. You can only turn over two cards in one go, so you need to remember where the numbers are hiding, then you can match them when you find their other half. You're doing the job of the equals sign, and the numbers need you to put them together and make a proper equality. When you do that, both those cards disappear! When you've made them all disappear, found more operations than Tux and you've won the game!"
msgid "A set of cards is shown. Each card has an associated sound, and each sound has a twin exactly the same. Click on a card to hear its hidden sound, and try to match the twins. You can only activate two cards at once, so you need to remember where a sound is, while you listen to its twin. When you turn over the twins, they both disappear."
msgstr ""
#. Activity title
#. +> trunk5 stable5
#: activities/memory-sound/ActivityInfo.qml:27
msgctxt "ActivityInfo|"
msgid "Audio memory game"
msgstr ""
#. Help title
#. +> trunk5 stable5
#: activities/memory-sound/ActivityInfo.qml:29
msgctxt "ActivityInfo|"
msgid "Click on cards and listen to find the matching sounds"
msgstr ""
#. Activity title
#. +> trunk5 stable5
#: activities/memory-tux/ActivityInfo.qml:27
msgctxt "ActivityInfo|"
msgid "Memory Game with images against Tux"
msgstr ""
#. Help title
#. +> trunk5 stable5
#: activities/memory-tux/ActivityInfo.qml:29
msgctxt "ActivityInfo|"
msgid "Flip the cards to find the matching pairs against Tux"
msgstr ""
#. Help goal
#. +> trunk5 stable5
#: activities/memory-tux/ActivityInfo.qml:32
#: activities/memory/ActivityInfo.qml:32
msgctxt "ActivityInfo|"
msgid "Train your memory and remove all the cards"
msgstr ""
#. Help manual
#. +> trunk5 stable5
#: activities/memory-tux/ActivityInfo.qml:36
msgctxt "ActivityInfo|"
msgid "A set of blank cards is shown. Each card has a picture on the other side, and each picture card has a twin exactly the same. Click on a card to see its hidden picture, and try to match the twins. You can only turn over two cards at once, so you need to remember where a picture is, while you look for its twin. When you turn over the twins, they both disappear. Tux teacher do the same."
msgid "You can see some cards, but you can't see what's on the other side of them. Each card is hiding the numeral form of a number, or the word to write it."
msgstr ""
#. +> trunk5 stable5
#: activities/memory-wordnumber/dataset.js:22
msgctxt "dataset|"
msgid "zero"
msgstr ""
#. +> trunk5 stable5
#: activities/memory-wordnumber/dataset.js:23
msgctxt "dataset|"
msgid "one"
msgstr ""
#. +> trunk5 stable5
#: activities/memory-wordnumber/dataset.js:24
msgctxt "dataset|"
msgid "two"
msgstr ""
#. +> trunk5 stable5
#: activities/memory-wordnumber/dataset.js:25
msgctxt "dataset|"
msgid "three"
msgstr ""
#. +> trunk5 stable5
#: activities/memory-wordnumber/dataset.js:26
msgctxt "dataset|"
msgid "four"
msgstr ""
#. +> trunk5 stable5
#: activities/memory-wordnumber/dataset.js:27
msgctxt "dataset|"
msgid "five"
msgstr ""
#. +> trunk5 stable5
#: activities/memory-wordnumber/dataset.js:28
msgctxt "dataset|"
msgid "six"
msgstr ""
#. +> trunk5 stable5
#: activities/memory-wordnumber/dataset.js:29
msgctxt "dataset|"
msgid "seven"
msgstr ""
#. +> trunk5 stable5
#: activities/memory-wordnumber/dataset.js:30
msgctxt "dataset|"
msgid "eight"
msgstr ""
#. +> trunk5 stable5
#: activities/memory-wordnumber/dataset.js:31
msgctxt "dataset|"
msgid "nine"
msgstr ""
#. +> trunk5 stable5
#: activities/memory-wordnumber/dataset.js:32
msgctxt "dataset|"
msgid "ten"
msgstr ""
#. +> trunk5 stable5
#: activities/memory-wordnumber/dataset.js:33
msgctxt "dataset|"
msgid "eleven"
msgstr ""
#. +> trunk5 stable5
#: activities/memory-wordnumber/dataset.js:34
msgctxt "dataset|"
msgid "twelve"
msgstr ""
#. +> trunk5 stable5
#: activities/memory-wordnumber/dataset.js:35
msgctxt "dataset|"
msgid "thirteen"
msgstr ""
#. +> trunk5 stable5
#: activities/memory-wordnumber/dataset.js:36
msgctxt "dataset|"
msgid "fourteen"
msgstr ""
#. +> trunk5 stable5
#: activities/memory-wordnumber/dataset.js:37
msgctxt "dataset|"
msgid "fifteen"
msgstr ""
#. +> trunk5 stable5
#: activities/memory-wordnumber/dataset.js:38
msgctxt "dataset|"
msgid "sixteen"
msgstr ""
#. +> trunk5 stable5
#: activities/memory-wordnumber/dataset.js:39
msgctxt "dataset|"
msgid "seventeen"
msgstr ""
#. +> trunk5 stable5
#: activities/memory-wordnumber/dataset.js:40
msgctxt "dataset|"
msgid "eighteen"
msgstr ""
#. +> trunk5 stable5
#: activities/memory-wordnumber/dataset.js:41
msgctxt "dataset|"
msgid "nineteen"
msgstr ""
#. +> trunk5 stable5
#: activities/memory-wordnumber/dataset.js:42
msgctxt "dataset|"
msgid "twenty"
msgstr ""
#. Activity title
#. +> trunk5 stable5
#: activities/memory/ActivityInfo.qml:27
msgctxt "ActivityInfo|"
msgid "Memory Game with images"
msgstr ""
#. Help title
#. +> trunk5 stable5
#: activities/memory/ActivityInfo.qml:29
msgctxt "ActivityInfo|"
msgid "Flip the cards to find the matching pairs"
msgstr ""
#. Help manual
#. +> trunk5 stable5
#: activities/memory/ActivityInfo.qml:36
msgctxt "ActivityInfo|"
msgid "A set of blank cards is shown. Each card has a picture on the other side, and each picture card has a twin exactly the same. Click on a card to see its hidden picture, and try to match the twins. You can only turn over two cards at once, so you need to remember where a picture is, while you look for its twin. When you turn over the twins, they both disappear."
msgid "GCompris is a high quality educational software suite, including a large number of activities for children aged 2 to 10."
msgstr ""
#. Help prerequisite
#. +> trunk5 stable5
#: activities/menu/ActivityInfo.qml:30
msgctxt "ActivityInfo|"
msgid "Some of the activities are game orientated, but nonetheless still educational."
msgstr ""
#. Help manual
#. +> trunk5 stable5
#: activities/menu/ActivityInfo.qml:32
msgctxt "ActivityInfo|"
msgid ""
"Select an icon to enter an activity or to display a list of activities in a category.\n"
"At the bottom of the screen is the GCompris control bar. Notice that you can hide or show the bar by touching its anchor.\n"
"The following icons are displayed:\n"
"(note that each icon is displayed only if available in the current activity)\n"
" Home - Exit an activity, go back to menu (Ctrl+W and escape key)\n"
" Arrows - Display the current level. Click to select another level\n"
" Lips - Repeat the question\n"
" Question Mark - Help\n"
" Reload - Start the activity from the beginning again\n"
" Tool - The configuration menu\n"
" G - About GCompris\n"
" Quit - Quit GCompris (Ctrl+Q)\n"
"The stars show suitable age groups for each game:\n"
" 1, 2 or 3 simple stars - from 2 to 6 years old\n"
" 1, 2 or 3 complex stars - 7 years and up\n"
"Shortcuts:\n"
" Ctrl+B Show or Hide the control bar\n"
" Ctrl+F Toggle full screen\n"
" Ctrl+M Toggle mute for the background music\n"
" Ctrl+S Toggle the activity section bar\n"
" "
msgstr ""
#. +> trunk5 stable5
#: activities/menu/ConfigurationItem.qml:77
msgctxt "ConfigurationItem|"
msgid "You have the full version"
msgstr ""
#. +> trunk5 stable5
#: activities/menu/ConfigurationItem.qml:78
msgctxt "ConfigurationItem|"
msgid "Buy the full version"
msgstr ""
#. +> trunk5 stable5
#: activities/menu/ConfigurationItem.qml:141
msgctxt "ConfigurationItem|"
msgid "On <a href='http://gcompris.net'>http://gcompris.net</a> you will find the instructions to obtain an activation code."
msgstr ""
#. +> trunk5 stable5
#: activities/menu/ConfigurationItem.qml:163
msgctxt "ConfigurationItem|"
msgid "Enter your activation code"
msgstr ""
#. +> trunk5 stable5
#: activities/menu/ConfigurationItem.qml:166
msgctxt "ConfigurationItem|"
msgid "Sorry, your code is too old for this version of GCompris"
msgstr ""
#. +> trunk5 stable5
#: activities/menu/ConfigurationItem.qml:169
msgctxt "ConfigurationItem|"
msgid "Your code is valid, thanks a lot for your support"
msgstr ""
#. +> trunk5 stable5
#: activities/menu/ConfigurationItem.qml:189
msgctxt "ConfigurationItem|"
msgid "Show locked activities"
msgstr ""
#. +> trunk5 stable5
#: activities/menu/ConfigurationItem.qml:199
msgctxt "ConfigurationItem|"
msgid "Enable audio voices"
msgstr ""
#. +> trunk5 stable5
#: activities/menu/ConfigurationItem.qml:208
msgctxt "ConfigurationItem|"
msgid "Enable audio effects"
msgstr ""
#. +> trunk5 stable5
#: activities/menu/ConfigurationItem.qml:217
msgctxt "ConfigurationItem|"
msgid "Fullscreen"
msgstr ""
#. +> trunk5 stable5
#: activities/menu/ConfigurationItem.qml:227
msgctxt "ConfigurationItem|"
msgid "Virtual Keyboard"
msgstr ""
#. +> trunk5 stable5
#: activities/menu/ConfigurationItem.qml:237
msgctxt "ConfigurationItem|"
msgid "Enable automatic downloads/updates of sound files"
msgstr ""
#. +> trunk5 stable5
#: activities/menu/ConfigurationItem.qml:251
msgctxt "ConfigurationItem|"
msgid "Use full word image set"
msgstr ""
#. +> trunk5 stable5
#: activities/menu/ConfigurationItem.qml:251
msgctxt "ConfigurationItem|"
msgid "Download full word image set"
msgstr ""
#. +> trunk5 stable5
#: activities/menu/ConfigurationItem.qml:262
msgctxt "ConfigurationItem|"
msgid "The activity section menu is visible"
msgstr ""
#. +> trunk5 stable5
#: activities/menu/ConfigurationItem.qml:275
msgctxt "ConfigurationItem|"
msgid "Font selector"
msgstr ""
#. +> trunk5 stable5
#: activities/menu/ConfigurationItem.qml:295
msgctxt "ConfigurationItem|"
msgid "Font size"
msgstr ""
#. +> trunk5 stable5
#: activities/menu/ConfigurationItem.qml:301
#: activities/menu/ConfigurationItem.qml:339
msgctxt "ConfigurationItem|"
msgid "Default"
msgstr ""
#. +> trunk5 stable5
#: activities/menu/ConfigurationItem.qml:313
msgctxt "ConfigurationItem|"
msgid "Font Capitalization"
msgstr ""
#. +> trunk5 stable5
#: activities/menu/ConfigurationItem.qml:333
msgctxt "ConfigurationItem|"
msgid "Font letter spacing"
msgstr ""
#. +> trunk5 stable5
#: activities/menu/ConfigurationItem.qml:352
msgctxt "ConfigurationItem|"
msgid "Language selector"
msgstr ""
#. +> trunk5 stable5
#: activities/menu/ConfigurationItem.qml:379
msgctxt "ConfigurationItem|"
msgid "Localized voices"
msgstr ""
#. +> trunk5 stable5
#: activities/menu/ConfigurationItem.qml:395
msgctxt "ConfigurationItem|"
msgid "Check for updates"
msgstr ""
#. +> trunk5 stable5
#: activities/menu/ConfigurationItem.qml:396
msgctxt "ConfigurationItem|"
msgid "Download"
msgstr ""
#. +> trunk5 stable5
#: activities/menu/ConfigurationItem.qml:414
msgctxt "ConfigurationItem|"
msgid "Difficulty filter:"
msgstr ""
#. +> trunk5 stable5
#: activities/menu/ConfigurationItem.qml:616
msgctxt "ConfigurationItem|"
msgid ""
"You selected a new locale. You need to restart GCompris to play in your new locale.<br/>"
"Do you want to download the corresponding sound files now?"
msgstr ""
#. +> trunk5 stable5
#: activities/menu/ConfigurationItem.qml:617
#: activities/menu/ConfigurationItem.qml:654
msgctxt "ConfigurationItem|"
msgid "Yes"
msgstr ""
#. +> trunk5 stable5
#: activities/menu/ConfigurationItem.qml:623
#: activities/menu/ConfigurationItem.qml:659
msgctxt "ConfigurationItem|"
msgid "No"
msgstr ""
#. +> trunk5 stable5
#: activities/menu/ConfigurationItem.qml:652
msgctxt "ConfigurationItem|"
msgid "The images for several activities are not yet installed. "
msgstr ""
#. +> trunk5 stable5
#: activities/menu/ConfigurationItem.qml:653
msgctxt "ConfigurationItem|"
msgid "Do you want to download them now?"
msgstr ""
#. +> trunk5 stable5
#: activities/menu/ConfigurationItem.qml:712
msgctxt "ConfigurationItem|"
msgid "Mixed case (default)"
msgstr ""
#. +> trunk5 stable5
#: activities/menu/ConfigurationItem.qml:713
msgctxt "ConfigurationItem|"
msgid "All uppercase"
msgstr ""
#. +> trunk5 stable5
#: activities/menu/ConfigurationItem.qml:714
msgctxt "ConfigurationItem|"
msgid "All lowercase"
msgstr ""
#. +> trunk5 stable5
#: activities/menu/Menu.qml:324
msgctxt "Menu|"
msgid "Put your favorite activities here by selecting the sun at the top right of that activity."
msgstr ""
#. +> trunk5 stable5
#: activities/menu/Menu.qml:588
msgctxt "Menu|"
msgid "Search specific activities"
msgstr ""
#. Activity title
#. +> trunk5 stable5
#: activities/mining/ActivityInfo.qml:27
msgctxt "ActivityInfo|"
msgid "Mining for gold"
msgstr ""
#. Help title
#. +> trunk5 stable5
#: activities/mining/ActivityInfo.qml:29
msgctxt "ActivityInfo|"
msgid "Use the mousewheel to approach the rockwall and look for gold nuggets."
msgstr ""
#. Help goal
#. +> trunk5 stable5
#: activities/mining/ActivityInfo.qml:32
msgctxt "ActivityInfo|"
msgid "Learn to use the mousewheel or the zoom / pinch gesture to zoom in and out."
msgstr ""
#. Help prerequisite
#. +> trunk5 stable5
#: activities/mining/ActivityInfo.qml:34
msgctxt "ActivityInfo|"
msgid "You should be familiar with moving the mouse and clicking."
msgstr ""
#. Help manual
#. +> trunk5 stable5
#: activities/mining/ActivityInfo.qml:36
msgctxt "ActivityInfo|"
msgid ""
"Looking at the rockwall, you can see a sparkle somewhere. Move next to this sparkle and use the mousewheel or the zoom gesture to zoom in. If you zoomed in at maximum, a gold nugget will appear at the position of the sparkle. Click on the gold nugget to collect it.\n"
"\n"
"Having collected the nugget, use the mousewheel or the pinch gesture to zoom out again. If you zoomed out at maximum, another sparkle will appear, showing the next gold nugget to collect. Collect enough nuggets to complete the level.\n"
"\n"
"The truck in the lower, right corner of the screen will tell you the number of already collected nuggets and the total number of nuggets to collect in this level."
msgstr ""
#. +> trunk5 stable5
#: activities/mining/ActivityInfo.qml:41
msgctxt "ActivityInfo|"
msgid ""
"Thanks to the Tuxpaint team for providing the following sounds under GPL:\n"
"- realrainbow.ogg - used when a new gold nugget appears\n"
"- metalpaint.wav - remixed and used when a gold nugget is collected"
msgstr ""
#. +> trunk5 stable5
#: activities/mining/Mining.qml:414
msgctxt "Mining|"
msgid "Find the sparkle and zoom in around it. If you have a mouse, point the cursor on the sparkle then use the scroll wheel. If you have a trackpad, point the cursor on the sparkle then drag one finger on the right area or two fingers on the center. On a touch area, drag two fingers away from the sparkle, one in each direction."
msgstr ""
#. +> trunk5 stable5
#: activities/mining/Mining.qml:425
msgctxt "Mining|"
msgid "Perfect you are zooming. Continue until you see the nugget."
msgstr ""
#. +> trunk5 stable5
#: activities/mining/Mining.qml:431
msgctxt "Mining|"
msgid "Hum, take care, you are zooming too far from the sparkle."
msgstr ""
#. +> trunk5 stable5
#: activities/mining/Mining.qml:437
msgctxt "Mining|"
msgid "Now you see the nugget, click on it to catch it."
msgstr ""
#. +> trunk5 stable5
#: activities/mining/Mining.qml:443
msgctxt "Mining|"
msgid "Hum, you are too far from the nugget to see it. Unzoom then zoom again as close as you can from the sparkle."
msgstr ""
#. +> trunk5 stable5
#: activities/mining/Mining.qml:449
msgctxt "Mining|"
msgid "Now unzoom and try to find another sparkle."
msgstr ""
#. +> trunk5 stable5
#: activities/mining/Mining.qml:455
msgctxt "Mining|"
msgid "Continue to unzoom until you see the sparkle."
msgstr ""
#. +> trunk5 stable5
#: activities/mining/Mining.qml:461
msgctxt "Mining|"
msgid "Now you see the sparkle, go ahead, you can zoom on it."
msgstr ""
#. Activity title
#. +> trunk5 stable5
#: activities/missing-letter/ActivityInfo.qml:28
msgctxt "ActivityInfo|"
msgid "Missing Letter"
msgstr ""
#. Help goal
#. +> trunk5 stable5
#: activities/missing-letter/ActivityInfo.qml:33
msgctxt "ActivityInfo|"
msgid "Training reading skills"
msgstr ""
#. Help prerequisite
#. +> trunk5 stable5
#: activities/missing-letter/ActivityInfo.qml:35
msgctxt "ActivityInfo|"
msgid "Word reading"
msgstr ""
#. Help manual
#. +> trunk5 stable5
#: activities/missing-letter/ActivityInfo.qml:37
msgctxt "ActivityInfo|"
msgid "An object is displayed in the main area, and an incomplete word is printed under the picture. Select the missing letter to complete the word."
msgid "We switched to English for this activity but you can select another language in the configuration dialog."
msgstr ""
#. Activity title
#. +> trunk5 stable5
#: activities/money/ActivityInfo.qml:27
msgctxt "ActivityInfo|"
msgid "Money"
msgstr ""
#. Help title
#. +> trunk5 stable5
#: activities/money/ActivityInfo.qml:29
msgctxt "ActivityInfo|"
msgid "Practice money usage"
msgstr ""
#. Help goal
#. +> trunk5 stable5
#: activities/money/ActivityInfo.qml:32
#: activities/money_cents/ActivityInfo.qml:32
msgctxt "ActivityInfo|"
msgid "You must buy the different items and give the exact price. At higher levels, several items are displayed, and you must first calculate the total price."
msgid "Click or tap on the coins or paper money at the bottom of the screen to pay. If you want to remove a coin or note, click or tap on it on the upper screen area."
msgstr ""
#. +> trunk5 stable5
#: activities/money/money.js:660
msgctxt "money|"
msgid "Click on the coins or paper money at the bottom of the screen to pay. If you want to remove a coin or note, click on it on the upper screen area."
msgid "Tux bought you different items and shows you his money. You must give him back his change. At higher levels, several items are displayed, and you must first calculate the total price."
msgid "Click on the coins or paper money at the bottom of the screen to pay. If you want to remove a coin or note, click on it on the upper screen area."
msgid "If you form a mill (line of 3 pieces), then select a piece of Tux, and remove it. Pieces of formed mill can not be removed unless no other pieces are left on board."
msgid "After all the pieces are placed, you and Tux will take turns to move them. Click on one of your pieces, and then on the adjacent empty spot to move it there. Green color spot indicates where you can move."
msgid "Play with a friend. First take turns to place nine pieces, and then take turns to move pieces"
msgstr ""
#. Activity title
#. +> trunk5 stable5
#: activities/number_sequence/ActivityInfo.qml:27
msgctxt "ActivityInfo|"
msgid "Number sequence"
msgstr ""
#. Help title
#. +> trunk5 stable5
#: activities/number_sequence/ActivityInfo.qml:29
msgctxt "ActivityInfo|"
msgid "Touch the numbers in the right sequence."
msgstr ""
#. Help goal
#. +> trunk5 stable5
#: activities/number_sequence/ActivityInfo.qml:32
msgctxt "ActivityInfo|"
msgid "Can count from 1 to 50."
msgstr ""
#. Help manual
#. +> trunk5 stable5
#: activities/number_sequence/ActivityInfo.qml:36
msgctxt "ActivityInfo|"
msgid "Draw the picture by touching each number in the right sequence, or sliding your finger or dragging the mouse through the numbers in the correct sequence."
msgid "Catch the odd or even number clouds. With a keyboard use the arrow keys to move the helicopter. With a pointing device you just click or tap on the target location. To know which number you have to catch you can either remember it or check the bottom right corner."
msgstr ""
#. Activity title
#. +> trunk5 stable5
#: activities/paintings/ActivityInfo.qml:32
msgctxt "ActivityInfo|"
msgid "Assemble the puzzle"
msgstr ""
#. Help title
#. +> trunk5 stable5
#: activities/paintings/ActivityInfo.qml:34
msgctxt "ActivityInfo|"
msgid "Drag and Drop the items to rebuild the original paintings"
msgstr ""
#. Help goal
#. +> trunk5 stable5
#: activities/paintings/ActivityInfo.qml:37
msgctxt "ActivityInfo|"
msgid "Spatial representation"
msgstr ""
#. Help prerequisite
#. +> trunk5 stable5
#: activities/paintings/ActivityInfo.qml:39
msgctxt "ActivityInfo|"
msgid "Mouse-manipulation: movement, drag and drop"
msgstr ""
#. Help manual
#. +> trunk5 stable5
#: activities/paintings/ActivityInfo.qml:41
msgctxt "ActivityInfo|"
msgid "Drag the image parts from the box on the left to create a painting on the main board."
msgid "Utagawa Hiroshige, Horse-mackerel and Prawn - 1840"
msgstr ""
#. Activity title
#. +> trunk5 stable5
#: activities/penalty/ActivityInfo.qml:27
msgctxt "ActivityInfo|"
msgid "Penalty kick"
msgstr ""
#. Help title
#. +> trunk5 stable5
#: activities/penalty/ActivityInfo.qml:29
msgctxt "ActivityInfo|"
msgid "Double click or double tap on the ball to score a goal."
msgstr ""
#. Help manual
#. +> trunk5 stable5
#: activities/penalty/ActivityInfo.qml:36
msgctxt "ActivityInfo|"
msgid "Double click or double tap on the ball to kick it. You can double click the left right or middle mouse button. If you lose, Tux catches the ball. You must click on it to bring it back to its former position"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/penalty/Penalty.qml:218
msgctxt "Penalty|"
msgid "Double click or double tap on the side of the goal you want to put the ball in."
msgstr ""
-#. +> stable5
-#: activities/penalty/Penalty.qml:278
-msgctxt "Penalty|"
-msgid "Double click or double tap on the ball to kick it."
-msgstr ""
-
#. +> trunk5 stable5
#: activities/penalty/Penalty.qml:258
msgctxt "Penalty|"
msgid "Click or tap the ball to bring it back to its former position"
msgstr ""
#. Activity title
#. +> trunk5 stable5
#: activities/photo_hunter/ActivityInfo.qml:27
msgctxt "ActivityInfo|"
msgid "Photo Hunter"
msgstr ""
#. Help title
#. +> trunk5 stable5
#: activities/photo_hunter/ActivityInfo.qml:29
msgctxt "ActivityInfo|"
msgid "Find the differences between the two pictures!"
msgstr ""
#. Help goal
#. +> trunk5 stable5
#: activities/photo_hunter/ActivityInfo.qml:32
msgctxt "ActivityInfo|"
msgid "Visual Discrimination"
msgstr ""
#. Help manual
#. +> trunk5 stable5
#: activities/photo_hunter/ActivityInfo.qml:36
msgctxt "ActivityInfo|"
msgid "Observe the two pictures carefully. There are some slight differences. When you find a difference you must click on it."
msgstr ""
#. +> trunk5 stable5
#: activities/photo_hunter/PhotoHunter.qml:107
msgctxt "PhotoHunter|"
msgid "Drag the slider to show the differences!"
msgstr ""
#. +> trunk5 stable5
#: activities/photo_hunter/PhotoHunter.qml:108
msgctxt "PhotoHunter|"
msgid "Click on the differences between the two images!"
msgstr ""
#. Activity title
#. +> trunk5 stable5
#: activities/planegame/ActivityInfo.qml:27
msgctxt "ActivityInfo|"
msgid "Numbers in Order"
msgstr ""
#. Help title
#. +> trunk5 stable5
#: activities/planegame/ActivityInfo.qml:29
msgctxt "ActivityInfo|"
msgid "Move the helicopter to catch the clouds in the correct order"
msgstr ""
#. Help manual
#. +> trunk5 stable5
#: activities/planegame/ActivityInfo.qml:36
msgctxt "ActivityInfo|"
msgid "Catch the clouds in increasing order. With a keyboard use the arrow keys to move the helicopter. With a pointing device you just click or tap on the target location. To know which number you have to catch you can either remember it or check the bottom right corner."
msgstr ""
#. Activity title
#. +> trunk5 stable5
#: activities/readingh/ActivityInfo.qml:27
msgctxt "ActivityInfo|"
msgid "Horizontal reading practice"
msgstr ""
#. Help title
#. +> trunk5 stable5
#: activities/readingh/ActivityInfo.qml:29
msgctxt "ActivityInfo|"
msgid "Read a list of words and work out if a given word is in it."
msgstr ""
#. Help goal
#. +> trunk5 stable5
#: activities/readingh/ActivityInfo.qml:32
#: activities/readingv/ActivityInfo.qml:32
msgctxt "ActivityInfo|"
msgid "Reading training in a limited time"
msgstr ""
#. Help manual
#. +> trunk5 stable5
#: activities/readingh/ActivityInfo.qml:36
#: activities/readingv/ActivityInfo.qml:36
msgctxt "ActivityInfo|"
msgid "A word is shown at the top right of the board. A list of words will appear and disappear on the left. Does the given word belong to the list?"
msgstr ""
#. +> trunk5 stable5
#: activities/readingh/Readingh.qml:104
msgctxt "Readingh|"
msgid "Select your locale"
msgstr ""
#. +> trunk5 stable5
#: activities/readingh/Readingh.qml:234
#, qt-format
msgctxt "Readingh|"
msgid ""
"<font color=\"#373737\">Check if the word<br/>"
"<b><font color=\"#315AAA\">%1</font></b><br/>"
"<font color=\"#373737\">is displayed"
msgstr ""
#. +> trunk5 stable5
#: activities/readingh/Readingh.qml:260
msgctxt "Readingh|"
msgid "Yes, I saw it!"
msgstr ""
#. +> trunk5 stable5
#: activities/readingh/Readingh.qml:275
msgctxt "Readingh|"
msgid "No, it was not there!"
msgstr ""
#. Activity title
#. +> trunk5 stable5
#: activities/readingv/ActivityInfo.qml:27
msgctxt "ActivityInfo|"
msgid "Vertical-reading practice"
msgstr ""
#. Help title
#. +> trunk5 stable5
#: activities/readingv/ActivityInfo.qml:29
msgctxt "ActivityInfo|"
msgid "Read a vertical list of words and work out if a given word is in it."
msgstr ""
#. Activity title
#. +> trunk5 stable5
#: activities/redraw/ActivityInfo.qml:27
msgctxt "ActivityInfo|"
msgid "Redraw the given image"
msgstr ""
#. Help title
#. +> trunk5 stable5
#: activities/redraw/ActivityInfo.qml:29
msgctxt "ActivityInfo|"
msgid "Draw perfectly the given image on the empty grid."
msgid "Click on different active elements : sun, cloud, dam, solar array, wind farm and transformers, in order to reactivate the entire electrical system. When the system is back up and Tux is in his home, push the light button for him. To win you must switch on all the consumers while all the producers are up. "
msgid "Click on different active elements : sun, cloud, dam, solar array, wind farm and transformers, in order to reactivate the entire electrical system."
msgid "When the system is back up and Tux is in his home, push the light button for him. To win you must switch on all the consumers while all the producers are up."
msgid "It is not possible to consume more electricity than what is produced. This is a key limitation in the distribution of electricity, with minor exceptions, electrical energy cannot be stored, and therefore it must be generated as it is needed. A sophisticated system of control is therefore required to ensure electric generation very closely matches the demand. If supply and demand are not in balance, generation plants and transmission equipment can shut down which, in the worst cases, can lead to a major regional blackout."
msgstr ""
#. Activity title
#. +> trunk5 stable5
#: activities/reversecount/ActivityInfo.qml:27
msgctxt "ActivityInfo|"
msgid "Practice subtraction with a fun game"
msgstr ""
#. Help title
#. ----------
#. Help goal
#. +> trunk5 stable5
#: activities/reversecount/ActivityInfo.qml:29
#: activities/reversecount/ActivityInfo.qml:32
msgctxt "ActivityInfo|"
msgid "Tux is hungry. Help him find fish by counting to the correct ice spot."
msgstr ""
#. Help prerequisite
#. +> trunk5 stable5
#: activities/reversecount/ActivityInfo.qml:34
msgctxt "ActivityInfo|"
msgid "Can read numbers on a dice, and count intervals up to 10 for the first level"
msgstr ""
#. Help manual
#. +> trunk5 stable5
#: activities/reversecount/ActivityInfo.qml:36
msgctxt "ActivityInfo|"
msgid "Click on the dice to show how many ice spots there are between Tux and the fish. Click the dice with the right mouse button to count backwards. When done, click on the OK button or hit the Enter key."
msgstr ""
#. Activity title
#. +> trunk5 stable5
#: activities/roman_numerals/ActivityInfo.qml:27
msgctxt "ActivityInfo|"
msgid "Roman numerals"
msgstr ""
#. Help manual
#. +> trunk5 stable5
#: activities/roman_numerals/ActivityInfo.qml:36
msgctxt "ActivityInfo|"
msgid "A Roman numeral is the name for a number when it is written in the way the Romans used to write numbers. Roman numerals are not used very often today in the west. They are used to write the names of kings and queens, or popes. For example: Queen Elizabeth II. They may be used to write the year a book or movie was made."
msgid "Proper form is to subtract only a value with the next lower power of 10. Thus, 900 is written CM, but 990 would not be XM - properly, it is CM for the 900 portion and XC for the 90 portion, or CMXC. Similarly, 999 would not be IM but rather CMXCIX - CM for the 900 portion, XC for the 90 portion, and IX for the 9 portion. Only values starting in 1's are ever used to subtract; 45 is properly XLV, not VL."
msgid "To balance the scales, move the masses on the left or the right side. They can be arranged in any order. Take care of the weight and the unit of the masses, remember that a kilogram (kg) is 1000 grams (g)."
msgid "To balance the scales, move the masses on the left or the right side. They can be arranged in any order. Take care of the weight and the unit of the masses, remember that a pound (lb) is 16 ounce (oz)."
msgid "The pound is a unit of mass, a property which corresponds to the common perception of how \"heavy\" an object is. This unit is used in the USA."
msgid "Try to split the candies to a given number of children"
msgstr ""
#. Help goal
#. +> trunk5 stable5
#: activities/share/ActivityInfo.qml:32
msgctxt "ActivityInfo|"
msgid "Learn the division of numbers"
msgstr ""
#. Help prerequisite
#. +> trunk5 stable5
#: activities/share/ActivityInfo.qml:34
msgctxt "ActivityInfo|"
msgid "Know how to count"
msgstr ""
#. Help manual
#. +> trunk5 stable5
#: activities/share/ActivityInfo.qml:36
msgctxt "ActivityInfo|"
msgid "Follow the instructions shown on the screen: first, drag the given number of boys/girls to the middle, then drag candies to each child's rectangle."
msgstr ""
#. +> trunk5 stable5
#: activities/share/resource/board/board0.qml:28
msgctxt "board0|"
msgid "Paul wants to equally share 2 candies between 2 of his friends: one girl and one boy. Can you help him? First, place the children in center, then drag the candies to each of them."
msgstr ""
#. +> trunk5 stable5
#: activities/share/resource/board/board0.qml:38
msgctxt "board0|"
msgid "Now he wants to give 4 candies to his friends."
msgstr ""
#. +> trunk5 stable5
#: activities/share/resource/board/board0.qml:48
msgctxt "board0|"
msgid "Can you now give 6 of Paul's candies to his friends?"
msgstr ""
#. +> trunk5 stable5
#: activities/share/resource/board/board0.qml:59
msgctxt "board0|"
msgid "Paul has only 10 candies left. He eats 2 candies and he gives the rest to his friends. Can you help him equally split the 8 remaining candies?"
msgstr ""
#. +> trunk5 stable5
#: activities/share/resource/board/board1.qml:28
msgctxt "board1|"
msgid "George wants to equally share 3 candies between 2 of his friends: one girl and one boy. Can he equally split the candies between his friends? First, place the children in center, then drag the candies to each of them. Be careful, a rest will remain!"
msgstr ""
#. +> trunk5 stable5
#: activities/share/resource/board/board1.qml:38
msgctxt "board1|"
msgid "Maria wants to equally share 5 candies between 3 of her friends: one girl and two boys. Can she equally split the candies between her friends? First, place the children in center, then drag the candies to each of them. Be careful, a rest will remain!"
msgstr ""
#. +> trunk5 stable5
#: activities/share/resource/board/board1.qml:48
msgctxt "board1|"
msgid "John wants to equally share 10 candies between 3 of his friends: one boy and two girls. Can he equally split the candies between his friends? First, place the children in center, then drag the candies to each of them."
msgstr ""
#. +> trunk5 stable5
#: activities/share/resource/board/board2.qml:28
msgctxt "board2|"
msgid "Alice wants to equally share 3 candies between 3 of her friends: one girl and two boys. Can you help her? First, place the children in the center, then drag the candies to each of them."
msgstr ""
#. +> trunk5 stable5
#: activities/share/resource/board/board2.qml:38
msgctxt "board2|"
msgid "Now, Alice wants to give 6 candies to her friends"
msgstr ""
#. +> trunk5 stable5
#: activities/share/resource/board/board2.qml:48
msgctxt "board2|"
msgid "Can you help Alice give 9 candies to her friends: one girl and two boys?"
msgstr ""
#. +> trunk5 stable5
#: activities/share/resource/board/board2.qml:58
msgctxt "board2|"
msgid "Alice has 12 candies left. She wants to give them all to her friends. Can you help her split the candies equally?"
msgstr ""
#. +> trunk5 stable5
#: activities/share/resource/board/board3.qml:28
msgctxt "board3|"
msgid "Michael wants to equally share 5 candies between 2 of his friends: one girl and one boy. Can you help him? First, place the children in center, then drag the candies to each of them!"
msgstr ""
#. +> trunk5 stable5
#: activities/share/resource/board/board3.qml:38
msgctxt "board3|"
msgid "Helen has 3 friends: one boy and two girls. She wants to give them 7 candies. Help her split the candies between her friends!"
msgstr ""
#. +> trunk5 stable5
#: activities/share/resource/board/board3.qml:48
msgctxt "board3|"
msgid "Michelle has 9 candies and wants to split them with two brothers and two sisters. Help her share the candies!"
msgstr ""
#. +> trunk5 stable5
#: activities/share/resource/board/board3.qml:58
msgctxt "board3|"
msgid "Thomas wants to share his 11 candies with his friends: three boys and one girl. Can you help him?"
msgstr ""
#. +> trunk5 stable5
#: activities/share/resource/board/board4.qml:28
msgctxt "board4|"
msgid "Charles wants to share his 8 candies with 3 of his friends: one boy and two girls. Can he split the candies equally?"
msgstr ""
#. +> trunk5 stable5
#: activities/share/resource/board/board4.qml:38
msgctxt "board4|"
msgid "For her birthday, Elizabeth has 12 candies to share with 4 of her friends: two girls and two boys. How should she split the candies to her friends?"
msgstr ""
#. +> trunk5 stable5
#: activities/share/resource/board/board4.qml:48
msgctxt "board4|"
msgid "Jason's father gave him 14 candies to share with his friends: two boys and three girls. Help him give the candies to his friends!"
msgstr ""
#. +> trunk5 stable5
#: activities/share/resource/board/board5.qml:29
msgctxt "board5|"
msgid "Bob wants to give 5 candies to his friends: two boys and one girl, his girlfriend already has one candy. Can you help him equally split the candies so that each friend will have the same amount of candies?"
msgstr ""
#. +> trunk5 stable5
#: activities/share/resource/board/board5.qml:39
msgctxt "board5|"
msgid "Harry wants to equally share 8 candies between his friends: one boy and two girls. Place the children in center, then drag the candies to each of them so that each of them has an equal number of candies."
msgstr ""
#. +> trunk5 stable5
#: activities/share/resource/board/board5.qml:49
msgctxt "board5|"
msgid "Can you now give 6 of Harry's candies to his friends?"
msgstr ""
#. +> trunk5 stable5
#: activities/share/resource/board/board6.qml:29
msgctxt "board6|"
msgid "Help Jon split 9 candies between three boys and two girls. The rest will remain to Jon."
msgstr ""
#. +> trunk5 stable5
#: activities/share/resource/board/board6.qml:39
msgctxt "board6|"
msgid "Jon wants to share the rest of his candies with his brother and his sister. Can you split them equally, knowing that his brother already has two candies?"
msgstr ""
#. +> trunk5 stable5
#: activities/share/resource/board/board6.qml:49
msgctxt "board6|"
msgid "Help Tux split some candies to his friends: 9 candies to one boy and two girls."
msgstr ""
#. +> trunk5 stable5
#: activities/share/share.js:95
#, qt-format
msgctxt "share|First part of Place %n boy(s) and %n girl(s) in the center. Then equally split %n candies between them."
msgid "Place %n boy(s) "
msgid_plural "Place %n boy(s) "
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: activities/share/share.js:99
#, qt-format
msgctxt "share|Second part of Place %n boy(s) and %n girl(s) in the center. Then equally split %n candies between them."
msgid "and %n girl(s) in the center. "
msgid_plural "and %n girl(s) in the center. "
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: activities/share/share.js:103
#, qt-format
msgctxt "share|Third part of Place %n boy(s) and %n girl(s) in the center. Then equally split %n candies between them."
msgid "Then equally split %n candies between them."
msgid_plural "Then equally split %n candies between them."
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: activities/share/Share.qml:346
#, qt-format
msgctxt "Share|"
msgid "You can't put more than %1 candies in the same widget"
msgstr ""
#. +> trunk5 stable5
#: activities/share/Share.qml:365
msgctxt "Share|"
msgid "Display candy counter"
msgstr ""
#. Activity title
#. +> trunk5 stable5
#: activities/simplepaint/ActivityInfo.qml:27
msgctxt "ActivityInfo|"
msgid "A simple drawing activity"
msgstr ""
#. Help title
#. +> trunk5 stable5
#: activities/simplepaint/ActivityInfo.qml:29
msgctxt "ActivityInfo|"
msgid "Create your own drawing"
msgstr ""
#. Help goal
#. +> trunk5 stable5
#: activities/simplepaint/ActivityInfo.qml:32
msgctxt "ActivityInfo|"
msgid "Enhance creative skills"
msgstr ""
#. Help manual
#. +> trunk5 stable5
#: activities/simplepaint/ActivityInfo.qml:36
msgctxt "ActivityInfo|"
msgid "Select a color and paint the rectangles as you like to create a drawing."
msgstr ""
#. Activity title
#. +> trunk5 stable5
#: activities/smallnumbers/ActivityInfo.qml:27
msgctxt "ActivityInfo|"
msgid "Numbers With Dice"
msgstr ""
#. Help title
#. +> trunk5 stable5
#: activities/smallnumbers/ActivityInfo.qml:29
msgctxt "ActivityInfo|"
msgid "Count the number of dots on dice before they reach the ground"
msgstr ""
#. Help goal
#. +> trunk5 stable5
#: activities/smallnumbers/ActivityInfo.qml:32
#: activities/smallnumbers2/ActivityInfo.qml:32
msgctxt "ActivityInfo|"
msgid "In a limited time, count the number of dots"
msgstr ""
#. Help prerequisite
#. +> trunk5 stable5
#: activities/smallnumbers/ActivityInfo.qml:34
#: activities/smallnumbers2/ActivityInfo.qml:34
msgctxt "ActivityInfo|"
msgid "Counting skills"
msgstr ""
#. Help manual
#. +> trunk5 stable5
#: activities/smallnumbers/ActivityInfo.qml:36
msgctxt "ActivityInfo|"
msgid "With the keyboard, type the number of dots you see on the falling dice."
msgstr ""
#. Activity title
#. +> trunk5 stable5
#: activities/smallnumbers2/ActivityInfo.qml:27
msgctxt "ActivityInfo|"
msgid "Numbers with dominoes"
msgstr ""
#. Help title
#. +> trunk5 stable5
#: activities/smallnumbers2/ActivityInfo.qml:29
msgctxt "ActivityInfo|"
msgid "Count the number of dots on the dominoes before they reach the ground"
msgstr ""
#. Help manual
#. +> trunk5 stable5
#: activities/smallnumbers2/ActivityInfo.qml:36
msgctxt "ActivityInfo|"
msgid "With the keyboard, type the number of dots you see on the falling dominoes."
msgstr ""
#. Activity title
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/submarine/ActivityInfo.qml:27
msgctxt "ActivityInfo|"
msgid "Pilot a Submarine"
msgstr ""
#. Help title
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/submarine/ActivityInfo.qml:29
msgctxt "ActivityInfo|"
msgid "Drive the submarine to the end point."
msgstr ""
#. Help goal
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/submarine/ActivityInfo.qml:32
msgctxt "ActivityInfo|"
msgid "Learn how to control a submarine"
msgstr ""
#. Help prerequisite
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/submarine/ActivityInfo.qml:34
msgctxt "ActivityInfo|"
msgid "Move and click using the mouse, physics basics"
msgstr ""
#. Help manual
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/submarine/ActivityInfo.qml:36
msgctxt "ActivityInfo|"
msgid ""
"Control the various parts of the submarine (the engine, rudders and ballast tanks) to reach the end point.\n"
" Controls:\n"
"\n"
" Engine:\n"
" D / Right arrow: Increase velocity\n"
" A / Left arrow: Decrease velocity\n"
"\n"
" Ballast tanks:\n"
" Switch filling of Ballast tanks:\n"
" W / Up arrow: Central ballast tank\n"
" R: Left ballast tank\n"
" T: Right ballast tanks\n"
" Switch flush ballast tanks:\n"
" S / Down arrow: Central ballast tank\n"
" F: Left ballast tank\n"
" G: Right ballast tanks\n"
"\n"
" Diving planes:\n"
" + : Increase diving plane angle\n"
" - : Decrease diving plane angle"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/submarine/Controls.qml:171
msgctxt "Controls|"
msgid "Left Ballast Tank"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/submarine/Controls.qml:333
msgctxt "Controls|"
msgid "Central Ballast Tank"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/submarine/Controls.qml:496
msgctxt "Controls|"
msgid "Right Ballast Tank"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/submarine/submarine.js:32
msgctxt "submarine|"
msgid "Move the submarine to the other side of the screen."
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/submarine/submarine.js:33
msgctxt "submarine|"
msgid "The leftmost item in the control panel is the engine of the submarine, indicating the current speed of the submarine."
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/submarine/submarine.js:34
msgctxt "submarine|"
msgid "Increase or decrease the velocity of the submarine using the engine."
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/submarine/submarine.js:35
msgctxt "submarine|"
msgid "Press the + button to increase the velocity, or the - button to decrease the velocity."
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/submarine/submarine.js:38
msgctxt "submarine|"
msgid "The item next to the engine is the Ballast tanks."
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/submarine/submarine.js:39
msgctxt "submarine|"
msgid "The Ballast tanks are used to float or dive under water."
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/submarine/submarine.js:40
msgctxt "submarine|"
msgid "If the ballast tanks are empty, the submarine will float. If the ballast tanks are full of water, the submarine will dive underwater."
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/submarine/submarine.js:41
msgctxt "submarine|"
msgid "Turning the upper valve on or off will alternatively allow or stop water from filling in the Ballast tanks, thus allowing it to dive underwater."
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/submarine/submarine.js:42
msgctxt "submarine|"
msgid "Turning the lower valve on or off will alternatively allow or stop water from flushing out the Ballast tanks, thus allowing it to float on the surface of the water."
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/submarine/submarine.js:45
msgctxt "submarine|"
msgid "The rightmost item in the control panel controls the diving planes of the submarine"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/submarine/submarine.js:46
msgctxt "submarine|"
msgid "The Diving Planes in a submarine is used to control the depth of the submarine accurately once it is underwater."
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/submarine/submarine.js:47
msgctxt "submarine|"
msgid "Once the submarine is moving underwater, increasing or decreasing the angle of the planes will increase and decrease the depth of the submarine."
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/submarine/submarine.js:48
msgctxt "submarine|"
msgid "The + button will increase the depth of the submarine, while the - button will decrease the depth of the submarine."
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/submarine/submarine.js:49
msgctxt "submarine|"
msgid "Grab the crown to open the gate."
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: activities/submarine/submarine.js:50
msgctxt "submarine|"
msgid "Check out the help menu for the keyboard controls."
msgstr ""
#. Activity title
#. +> trunk5 stable5
#: activities/sudoku/ActivityInfo.qml:27
msgctxt "ActivityInfo|"
msgid "Sudoku, place unique symbols in a grid"
msgstr ""
#. Help title
#. +> trunk5 stable5
#: activities/sudoku/ActivityInfo.qml:29
msgctxt "ActivityInfo|"
msgid "Symbols must be unique in a row, in a column, and (if defined) each region."
msgstr ""
#. Help goal
#. +> trunk5 stable5
#: activities/sudoku/ActivityInfo.qml:32
msgctxt "ActivityInfo|"
msgid "The aim of the puzzle is to enter a symbol or numeral from 1 through 9 in each cell of a grid. In the official Sudoku the grid is 9x9 made up of 3x3 subgrids (called 'regions'). In GCompris we start at lower levels with a simpler version using symbols and with no regions. In all cases the grid is presented with various symbols or numerals given in some cells (the 'givens'). Each row, column and region must contain only one instance of each symbol or numeral (Source <http://en.wikipedia.org/wiki/Sudoku>)."
msgstr ""
#. Help prerequisite
#. +> trunk5 stable5
#: activities/sudoku/ActivityInfo.qml:34
msgctxt "ActivityInfo|"
msgid "Completing the puzzle requires patience and logical ability"
msgstr ""
#. Help manual
#. +> trunk5 stable5
#: activities/sudoku/ActivityInfo.qml:36
msgctxt "ActivityInfo|"
msgid "Select a number or a symbol on the left and click on its target position. GCompris will not let you enter invalid data."
msgstr ""
#. Activity title
#. +> trunk5 stable5
#: activities/superbrain/ActivityInfo.qml:27
msgctxt "ActivityInfo|"
msgid "Super Brain"
msgstr ""
#. Help title
#. ----------
#. Help goal
#. +> trunk5 stable5
#: activities/superbrain/ActivityInfo.qml:29
#: activities/superbrain/ActivityInfo.qml:32
msgctxt "ActivityInfo|"
msgid "Tux has hidden several items. Find them again in the correct order"
msgstr ""
#. Help manual
#. +> trunk5 stable5
#: activities/superbrain/ActivityInfo.qml:36
msgctxt "ActivityInfo|"
msgid ""
"Click on the items until you find what you think is the correct answer. Then, click on the OK button. In the lower levels, Tux gives you an indication if you found a hiding place by marking the item with a black box. In the levels 4 and 8 an item may be hidden several times.<br/>"
"You can use the right mouse button to flip the items in the opposite order or the item chooser to directly pick an item. Press and hold a mouse button or on the touch screen to automatically choose the last item selected on a column. Double click or tap on a previously selected item in your guess history to mark it as 'correct'. Such marked items are automatically selected in your current and future guesses until you un-mark them, again by double clicking or tapping."
msgstr ""
#. +> trunk5 stable5
#: activities/superbrain/Superbrain.qml:145
msgctxt "Superbrain|"
msgid "This item is well placed"
msgstr ""
#. +> trunk5 stable5
#: activities/superbrain/Superbrain.qml:147
msgctxt "Superbrain|"
msgid "This item is misplaced"
msgstr ""
#. +> trunk5 stable5
#: activities/superbrain/Superbrain.qml:631
msgctxt "Superbrain|"
msgid "Colors"
msgstr ""
#. +> trunk5 stable5
#: activities/superbrain/Superbrain.qml:632
msgctxt "Superbrain|"
msgid "Shapes"
msgstr ""
#. +> trunk5 stable5
#: activities/superbrain/Superbrain.qml:643
msgctxt "Superbrain|"
msgid "Select your mode"
msgstr ""
#. Activity title
#. +> trunk5 stable5
#: activities/tangram/ActivityInfo.qml:27
msgctxt "ActivityInfo|"
msgid "The tangram puzzle game"
msgstr ""
#. Help title
#. +> trunk5 stable5
#: activities/tangram/ActivityInfo.qml:29
msgctxt "ActivityInfo|"
msgid "The objective is to form a given shape"
msgstr ""
#. Help goal
#. +> trunk5 stable5
#: activities/tangram/ActivityInfo.qml:32
msgctxt "ActivityInfo|"
msgid ""
"From Wikipedia, the free encyclopedia. Tangram (Chinese: literally 'seven boards of cunning') is a Chinese puzzle. While the tangram is often said to be ancient, its existence has only been verified as far back as 1800. It consists of 7 pieces, called tans, which fit together to form a square; Using the square side as 1 unit, the 7 pieces contains:\n"
" 5 right isosceles triangles, including:\n"
" - 2 small size ones (legs of 1)\n"
" - 1 medium size (legs of square root of 2)\n"
" - 2 large size (legs of 2)\n"
" 1 square (side of 1) and\n"
" 1 parallelogram (sides of 1 and square root of 2)\n"
" "
msgstr ""
#. Help manual
#. +> trunk5 stable5
#: activities/tangram/ActivityInfo.qml:43
msgctxt "ActivityInfo|"
msgid "Select the tangram to form. Move a piece by dragging it. The symmetrical button appears on items that supports it. Click on the rotation button or drag around it to show the rotation you want. At first levels, simpler objects are used to introduce the tangram concept."
msgstr ""
#. Activity title
#. +> trunk5 stable5
#: activities/target/ActivityInfo.qml:27
msgctxt "ActivityInfo|"
msgid "Practice addition with a target game"
msgstr ""
#. Help title
#. +> trunk5 stable5
#: activities/target/ActivityInfo.qml:29
msgctxt "ActivityInfo|"
msgid "Hit the target and count your points"
msgstr ""
#. Help goal
#. +> trunk5 stable5
#: activities/target/ActivityInfo.qml:32
msgctxt "ActivityInfo|"
msgid "Throw darts at a target and count your score."
msgstr ""
#. Help prerequisite
#. +> trunk5 stable5
#: activities/target/ActivityInfo.qml:34
msgctxt "ActivityInfo|"
msgid "Can move the mouse, can read numbers and count up to 15 for the first level"
msgstr ""
#. Help manual
#. +> trunk5 stable5
#: activities/target/ActivityInfo.qml:36
msgctxt "ActivityInfo|"
msgid "Check the speed and direction of the target, and then click on it to launch a dart. When all your darts are thrown, you are asked to count your score. Enter the score with the keyboard."
msgid "Play with a friend. Take turns to click on the square which you want to mark. First player to create a line of 3 marks wins"
msgstr ""
#. Activity title
#. +> trunk5 stable5
#: activities/traffic/ActivityInfo.qml:27
msgctxt "ActivityInfo|"
msgid "A sliding-block puzzle game"
msgstr ""
#. Help title
#. +> trunk5 stable5
#: activities/traffic/ActivityInfo.qml:29
msgctxt "ActivityInfo|"
msgid "Remove the red car from the parking lot through the gate on the right"
msgstr ""
#. Help manual
#. +> trunk5 stable5
#: activities/traffic/ActivityInfo.qml:36
msgctxt "ActivityInfo|"
msgid "Each car can only move either horizontally or vertically. You must make some room in order to let the red car move through the gate on the right."
msgstr ""
#. +> trunk5 stable5
#: activities/traffic/Traffic.qml:117
msgctxt "Traffic|"
msgid "Colors"
msgstr ""
#. +> trunk5 stable5
#: activities/traffic/Traffic.qml:118
msgctxt "Traffic|"
msgid "Images"
msgstr ""
#. +> trunk5 stable5
#: activities/traffic/Traffic.qml:129
msgctxt "Traffic|"
msgid "Select your mode"
msgstr ""
#. Activity title
#. +> trunk5 stable5
#: activities/watercycle/ActivityInfo.qml:27
msgctxt "ActivityInfo|"
msgid "Watercycle"
msgstr ""
#. Help title
#. +> trunk5 stable5
#: activities/watercycle/ActivityInfo.qml:29
msgctxt "ActivityInfo|"
msgid "Tux has come back from fishing on his boat. Bring the water system back up so he can take a shower."
msgstr ""
#. Help goal
#. +> trunk5 stable5
#: activities/watercycle/ActivityInfo.qml:32
msgctxt "ActivityInfo|"
msgid "Learn the water cycle"
msgstr ""
#. Help manual
#. +> trunk5 stable5
#: activities/watercycle/ActivityInfo.qml:36
msgctxt "ActivityInfo|"
msgid "Click on different active elements: sun, cloud, pumping station, and the sewage treatment plant, in order to reactivate the entire water system. When the system is back up and Tux is in the shower, push the shower button for him."
msgstr ""
#. +> trunk5 stable5
#: activities/watercycle/Watercycle.qml:65
msgctxt "Watercycle|"
msgid "Sun is the main component of water cycle. Click on the sun to start the water cycle."
msgstr ""
#. +> trunk5 stable5
#: activities/watercycle/Watercycle.qml:66
msgctxt "Watercycle|"
msgid "As the sun rises, the water of the sea starts heating and evaporates."
msgstr ""
#. +> trunk5 stable5
#: activities/watercycle/Watercycle.qml:67
msgctxt "Watercycle|"
msgid " Water vapor condenses to form cloud and when clouds become heavy, it rains. Click on the cloud."
msgstr ""
#. +> trunk5 stable5
#: activities/watercycle/Watercycle.qml:68
msgctxt "Watercycle|"
msgid "Rain causes rivers to swell up and this water is transported to us via motor pumps through water-tower. Click on the motor pump to supply water to residents."
msgstr ""
#. +> trunk5 stable5
#: activities/watercycle/Watercycle.qml:70
msgctxt "Watercycle|"
msgid "See the tower filled with water. Activate the sewage treatment station by clicking on it."
msgstr ""
#. +> trunk5 stable5
#: activities/watercycle/Watercycle.qml:71
msgctxt "Watercycle|"
msgid "Great, click on the shower, as Tux arrives home."
msgstr ""
#. +> trunk5 stable5
#: activities/watercycle/Watercycle.qml:72
msgctxt "Watercycle|"
msgid "Fantastic, you have completed water cycle. You can continue playing."
msgstr ""
#. +> trunk5 stable5
#: activities/watercycle/Watercycle.qml:96
msgctxt "Watercycle|"
msgid "The water cycle (also known as the hydrologic cycle) is the journey water takes as it circulates from the land to the sky and back again. The sun's heat provides energy to evaporate water from water bodies like oceans."
msgstr ""
#. +> trunk5 stable5
#: activities/watercycle/Watercycle.qml:99
msgctxt "Watercycle|"
msgid "Plants also lose water to the air through transpiration. The water vapor eventually, cools forming tiny droplets in clouds. When the clouds meet cool air over land, precipitation is triggered and fall down as rain."
msgstr ""
#. +> trunk5 stable5
#: activities/watercycle/Watercycle.qml:102
msgctxt "Watercycle|"
msgid "Some of the water is trapped between rock or clay layers, called groundwater. But most of the water flows as runoff, eventually returning to the seas via rivers."
msgstr ""
#. +> trunk5 stable5
#: activities/watercycle/Watercycle.qml:104
msgctxt "Watercycle|"
msgid "Your goal is to complete water cycle before Tux reaches home. Click on the different components which make up the water cycle. First click on sun, then cloud, water pumping station near the river, sewage treatment, and at last regulate the switch to provide water to Tux's shower."
msgstr ""
#. Activity title
#. +> trunk5 stable5
#: activities/wordsgame/ActivityInfo.qml:27
msgctxt "ActivityInfo|"
msgid "Falling Words"
msgstr ""
#. Help title
#. +> trunk5 stable5
#: activities/wordsgame/ActivityInfo.qml:29
msgctxt "ActivityInfo|"
msgid "Type the falling words before they reach the ground"
msgstr ""
#. Help goal
#. +> trunk5 stable5
#: activities/wordsgame/ActivityInfo.qml:32
msgctxt "ActivityInfo|"
msgid "Keyboard training"
msgstr ""
#. Help prerequisite
#. +> trunk5 stable5
#: activities/wordsgame/ActivityInfo.qml:34
msgctxt "ActivityInfo|"
msgid "Keyboard manipulation"
msgstr ""
#. Help manual
#. +> trunk5 stable5
#: activities/wordsgame/ActivityInfo.qml:36
msgctxt "ActivityInfo|"
msgid "Type the complete word as it falls, before it reaches the ground"
msgstr ""
#. +> trunk5 stable5
#: core/BuyMeOverlay.qml:77
msgctxt "BuyMeOverlay|"
msgid ""
"This activity is only available in the full version of GCompris.<br/>"
"On <a href='http://gcompris.net'>http://gcompris.net</a> you will find the instructions to obtain an activation code. Then go to the main configuration dialog to enter the code."
msgstr ""
#. +> trunk5 stable5
#: core/BuyMeOverlayInapp.qml:76
msgctxt "BuyMeOverlayInapp|"
msgid "This activity is only available in the full version of GCompris."
msgstr ""
#. +> trunk5 stable5
#: core/BuyMeOverlayInapp.qml:88
msgctxt "BuyMeOverlayInapp|"
msgid "Buy the full version"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: core/ChangeLog.qml:40
msgctxt "ChangeLog|"
msgid "License page added in configuration. Multiple changes on layouts to improve the ergonomy."
msgstr ""
#. +> trunk5 stable5
#: core/ChangeLog.qml:41
msgctxt "ChangeLog|"
msgid "Lang activity now available in Polish, Swedish and Ukrainian."
msgstr ""
#. +> trunk5 stable5
#: core/ChangeLog.qml:42
msgctxt "ChangeLog|"
msgid "Search feature."
msgstr ""
#. +> trunk5 stable5
#: core/ChangeLog.qml:43
msgctxt "ChangeLog|"
msgid "A Changelog."
msgstr ""
#. +> trunk5 stable5
#: core/ChangeLog.qml:44
msgctxt "ChangeLog|"
msgid "Many little fixes. Lang activity now available in French."
msgstr ""
#. +> trunk5 stable5
#: core/ChangeLog.qml:45
msgctxt "ChangeLog|"
msgid "Adding a loading overlay to let the user know that some actions are taking place (loading an activity for example) and can take some seconds. Translations added for: Catalan (Valencian), Chinese Traditional, Finnish (92% translated), Russian (98% translated), Slovak (92% translated), Turkish."
msgid "<b>GCompris</b> is a Free Software developed within the KDE community."
msgstr ""
#. +> trunk5 stable5
#: core/DialogAbout.qml:82
#, qt-format
msgctxt "DialogAbout|"
msgid ""
"<b>KDE</b> is a world-wide network of software engineers, artists, writers, translators and facilitators who are committed to <a href=\"%1\">Free Software</a> development. This community has created hundreds of Free Software applications as part of the KDE frameworks, workspaces and applications.<br />"
"<br />"
"KDE is a cooperative enterprise in which no single entity controls the efforts or products of KDE to the exclusion of others. Everyone is welcome to join and contribute to KDE, including you.<br />"
"<br />"
"Visit <a href=\"%2\">%2</a> for more information about the KDE community and the software we produce."
msgstr ""
#. +> trunk5 stable5
#: core/DialogAbout.qml:99
#, qt-format
msgctxt "DialogAbout|"
msgid ""
"Software can always be improved, and the KDE team is ready to do so. However, you - the user - must tell us when something does not work as expected or could be done better.<br />"
"<br />"
"KDE has a bug tracking system. Visit <a href=\"%1\">%1</a> to report a bug.<br />"
"<br />"
"If you have a suggestion for improvement then you are welcome to use the bug tracking system to register your wish. Make sure you use the severity called \"Wishlist\"."
msgstr ""
#. +> trunk5 stable5
#: core/DialogAbout.qml:111
#, qt-format
msgctxt "DialogAbout|"
msgid ""
"You do not have to be a software developer to be a member of the KDE team. You can join the national teams that translate program interfaces. You can provide graphics, themes, sounds, and improved documentation. You decide!<br />"
"<br />"
"Visit <a href=\"%1\">%1</a> for information on some projects in which you can participate.<br />"
"<br />"
"If you need more information or documentation, then a visit to <a href=\"%2\">%2</a> will provide you with what you need."
msgstr ""
#. +> trunk5 stable5
#: core/DialogAbout.qml:128
#, qt-format
msgctxt "DialogAbout|"
msgid ""
"To support development the KDE community has formed the KDE e.V., a non-profit organization legally founded in Germany. KDE e.V. represents the KDE community in legal and financial matters. See <a href=\"%1\">%1</a> for information on KDE e.V.<br />"
"<br />"
"KDE benefits from many kinds of contributions, including financial. We use the funds to reimburse members and others for expenses they incur when contributing. Further funds are used for legal support and organizing conferences and meetings. <br />"
" <br />"
"We would like to encourage you to support our efforts with a financial donation, using one of the ways described at <a href=\"%2\">%2</a>.<br />"
"<br />"
"Thank you very much in advance for your support."
msgstr ""
#. +> trunk5 stable5
#: core/DialogAbout.qml:145
#, qt-format
msgctxt "DialogAbout|"
msgid "<b>A big thanks to the development team:</b> %1"
msgstr ""
#. +> trunk5 stable5
#: core/DialogAbout.qml:149
#, qt-format
msgctxt "DialogAbout|"
msgid "<b>A big thanks to the translation team:</b> %1"
msgstr ""
#. +> trunk5 stable5
#: core/DialogActivityConfig.qml:94
#, qt-format
msgctxt "DialogActivityConfig|"
msgid "%1 configuration"
msgstr ""
#. +> trunk5 stable5
#: core/DialogActivityConfig.qml:96
msgctxt "DialogActivityConfig|"
msgid "Configuration"
msgstr ""
#. +> trunk5 stable5
#: core/DialogHelp.qml:63
msgctxt "DialogHelp|"
msgid "Author:"
msgstr ""
#. +> trunk5 stable5
#: core/DialogHelp.qml:67
msgctxt "DialogHelp|"
msgid "Prerequisite:"
msgstr ""
#. +> trunk5 stable5
#: core/DialogHelp.qml:72
msgctxt "DialogHelp|"
msgid "Goal:"
msgstr ""
#. +> trunk5 stable5
#: core/DialogHelp.qml:77
msgctxt "DialogHelp|"
msgid "Manual:"
msgstr ""
#. +> trunk5 stable5
#: core/DialogHelp.qml:81
msgctxt "DialogHelp|"
msgid "Credit:"
msgstr ""
#. +> trunk5 stable5
#: core/DialogHelp.qml:85
msgctxt "DialogHelp|"
msgid "Section:"
msgstr ""
#. +> trunk5 stable5
#: core/DownloadDialog.qml:166
msgctxt "DownloadDialog|"
msgid "Downloading ..."
msgstr ""
#. Run this task in background
#. +> trunk5 stable5
#: core/DownloadDialog.qml:210
msgctxt "DownloadDialog|"
msgid "Background"
msgstr ""
#. +> trunk5 stable5
#: core/DownloadDialog.qml:228
msgctxt "DownloadDialog|"
msgid "Abort"
msgstr ""
#. +> trunk5 stable5
#: core/DownloadDialog.qml:254
msgctxt "DownloadDialog|"
msgid "Download error"
msgstr ""
#. +> trunk5 stable5
#: core/DownloadDialog.qml:282
msgctxt "DownloadDialog|"
msgid "Your download finished successfully. The data files are now available."
msgstr ""
#. +> trunk5 stable5
#: core/DownloadDialog.qml:284
msgctxt "DownloadDialog|"
msgid "Restart any currently active activity."
msgstr ""
#. +> trunk5 stable5
#: core/DownloadDialog.qml:286
msgctxt "DownloadDialog|"
msgid "Your local data files are up-to-date."
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: core/IntroMessage.qml:118
msgctxt "IntroMessage|"
msgid "Previous"
msgstr ""
#. +> trunk5 stable5
#: core/IntroMessage.qml:134
msgctxt "IntroMessage|"
msgid "Next"
msgstr ""
-#. +> trunk5
+#. +> trunk5 stable5
#: core/IntroMessage.qml:149
msgctxt "IntroMessage|"
msgid "Skip"
msgstr ""
-#. +> stable5
-#: core/IntroMessage.qml:116
-msgctxt "IntroMessage|"
-msgid "Let's go"
-msgstr ""
-
-#. +> stable5
-#: core/IntroMessage.qml:181
-msgctxt "IntroMessage|"
-msgid "Skip Instruction"
-msgstr ""
-
#. +> trunk5 stable5
#: core/LanguageList.qml:43
msgctxt "LanguageList|"
msgid "Your system default"
msgstr ""
#. +> trunk5 stable5
#: core/main.cpp:153
msgctxt "QObject|"
msgid "Run GCompris with the default system cursor."
msgstr ""
#. +> trunk5 stable5
#: core/main.cpp:156
msgctxt "QObject|"
msgid "Run GCompris without cursor (touch screen mode)."
msgstr ""
#. +> trunk5 stable5
#: core/main.cpp:159
msgctxt "QObject|"
msgid "Run GCompris in fullscreen mode."
msgstr ""
#. +> trunk5 stable5
#: core/main.cpp:162
msgctxt "QObject|"
msgid "Run GCompris in window mode."
msgstr ""
#. +> trunk5 stable5
#: core/main.cpp:165
msgctxt "QObject|"
msgid "Run GCompris with sound enabled."
msgstr ""
#. +> trunk5 stable5
#: core/main.cpp:168
msgctxt "QObject|"
msgid "Run GCompris without sound."
msgstr ""
#. +> trunk5 stable5
#: core/main.cpp:171
msgctxt "QObject|"
msgid "Disable the kiosk mode (default)."
msgstr ""
#. +> trunk5 stable5
#: core/main.cpp:174
msgctxt "QObject|"
msgid "Enable the kiosk mode."
msgstr ""
#. +> trunk5 stable5
#: core/main.qml:130
msgctxt "main|"
msgid "The images for several activities are not yet installed. Do you want to download them now?"
msgstr ""
#. +> trunk5 stable5
#: core/main.qml:132 core/main.qml:171
msgctxt "main|"
msgid "Yes"
msgstr ""
#. +> trunk5 stable5
#: core/main.qml:137 core/main.qml:177
msgctxt "main|"
msgid "No"
msgstr ""
#. +> trunk5 stable5
#: core/main.qml:160
msgctxt "main|"
msgid "Welcome to GCompris!"
msgstr ""
#. +> trunk5 stable5
#: core/main.qml:161
msgctxt "main|"
msgid "You are running GCompris for the first time."
msgstr ""
#. +> trunk5 stable5
#: core/main.qml:162
msgctxt "main|"
msgid "You should verify that your application settings especially your language is set correctly, and that all language specific sound files are installed. You can do this in the Preferences Dialog."
msgstr ""
#. +> trunk5 stable5
#: core/main.qml:164
msgctxt "main|"
msgid "Have Fun!"
msgstr ""
#. +> trunk5 stable5
#: core/main.qml:166
#, qt-format
msgctxt "main|"
msgid "Your current language is %1 (%2)."
msgstr ""
#. +> trunk5 stable5
#: core/main.qml:170
msgctxt "main|"
msgid "Do you want to download the corresponding sound files now?"
msgstr ""
#. +> trunk5 stable5
#: core/main.qml:199
msgctxt "main|"
msgid "GCompris has been updated! Here are the new changes:<br/>"
msgid "Turn over two cards to match the calculation with its answer."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "checkers_2players"
#. +> trunk5 stable5
#: : input:18
#, kde-format
msgid "play checkers with your friend"
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "ballcatch"
#. +> trunk5 stable5
#: : input:20
#, kde-format
msgid "Press the left and right arrow key at the same time to send the ball straight on"
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "memory-tux"
#. i18n: intro voices, see GCompris-voices/README.md - activity: "memory"
#. +> trunk5 stable5
#: : input:22 input:38
#, kde-format
msgid "Click on a card and find its double."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "balancebox"
#. +> trunk5 stable5
#: : input:24
#, kde-format
msgid "Tilt the box to navigate the ball to the door."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "baby_wordprocessor"
#. +> trunk5 stable5
#: : input:26
#, kde-format
msgid "A simplistic word processor to play around with the keyboard"
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "hanoi_real"
#. +> trunk5 stable5
#: : input:28
#, kde-format
msgid "Rebuild the model tower on the right support. Take care, no disc may be placed atop a smaller disc."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "babymatch"
#. +> trunk5 stable5
#: : input:30
#, kde-format
msgid "Drag and drop the objects matching the pictures"
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "chess_2players"
#. +> trunk5 stable5
#: : input:32
#, kde-format
msgid "play chess against your friend"
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "color_mix_light"
#. +> trunk5 stable5
#: : input:34
#, kde-format
msgid "Match the colour by moving the sliders on the torches"
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "missing-letter"
#. +> trunk5 stable5
#: : input:36
#, kde-format
msgid "Find the missing letter and complete the word by clicking on one of the letters proposed on the side."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "followline"
#. +> trunk5 stable5
#: : input:40
#, kde-format
msgid " Move the mouse or your finger along the pipe to stop the fire."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "gletters"
#. +> trunk5 stable5
#: : input:42
#, kde-format
msgid "Type the letters on your keyboard before they reach the ground."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "calendar"
#. i18n: intro voices, see GCompris-voices/README.md - activity: "find_the_day"
-#. +> trunk5
+#. +> trunk5 stable5
#: : input:44 input:214
#, kde-format
msgid "Select the asked date on the calendar"
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "braille_alphabets"
#. +> trunk5 stable5
#: : input:46
#, kde-format
msgid "Click on Tux to start and then re-create the Braille cells."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "scalesboard"
#. i18n: intro voices, see GCompris-voices/README.md - activity: "scalesboard_weight"
#. i18n: intro voices, see GCompris-voices/README.md - activity: "scalesboard_weight_avoirdupois"
#. +> trunk5 stable5
#: : input:48 input:102 input:248
#, kde-format
msgid "Drag the weights up to balance the scales."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "smallnumbers"
#. +> trunk5 stable5
#: : input:50
#, kde-format
msgid "Count the number on your dice and type it on your keyboard before it reaches the ground."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "sudoku"
#. +> trunk5 stable5
#: : input:52
#, kde-format
msgid "Select a number or a symbol and click its target area. Each symbol must appear only once in a row, in a column and in a subregion if any."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "memory-enumerate"
#. +> trunk5 stable5
#: : input:54
#, kde-format
msgid "Match a number card with a card displaying the same number of butterflies."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "memory-sound-tux"
#. i18n: intro voices, see GCompris-voices/README.md - activity: "memory-sound"
#. +> trunk5 stable5
#: : input:56 input:254
#, kde-format
msgid "Click on an audio card and find its double."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "tic_tac_toe_2players"
#. i18n: intro voices, see GCompris-voices/README.md - activity: "tic_tac_toe"
#. +> trunk5 stable5
#: : input:58 input:114
#, kde-format
msgid "Click on the square which you wish to mark and try to mark 3 consecutive squares before Tux."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "chess"
#. +> trunk5 stable5
#: : input:60
#, kde-format
msgid "play chess against Tux"
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "mazeinvisible"
#. +> trunk5 stable5
#: : input:62
#, kde-format
msgid "Use the arrow keys or swipe the touch screen to guide Tux out. Use the maze icon or the space key to see the map."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "nine_men_morris_2players"
#. +> trunk5 stable5
#: : input:64
#, kde-format
msgid "Click on the dot where you wish to place your piece and try to take all your friend's pieces."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "algebra_by"
#. +> trunk5 stable5
#: : input:66
#, kde-format
msgid "Multiply the two numbers together and type in your answer before the balloon lands in the water"
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "algebra_minus"
#. +> trunk5 stable5
#: : input:68
#, kde-format
msgid "Subtract the two numbers and type in your answer before the balloon lands in the water"
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "algebra_div"
#. +> trunk5 stable5
#: : input:70
#, kde-format
msgid "Find the result of the division and type in your answer before the balloon lands in the water"
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "hexagon"
#. +> trunk5 stable5
#: : input:72
#, kde-format
msgid "Click on the hexagons to find the hidden object, the red zone indicates that you're close to it!"
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "details"
#. +> trunk5 stable5
#: : input:74
#, kde-format
msgid "Slide the images on their respective targets"
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "family"
-#. +> trunk5
+#. +> trunk5 stable5
#: : input:76
#, kde-format
msgid "Let us understand what to call our relatives"
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "traffic"
#. +> trunk5 stable5
#: : input:78
#, kde-format
msgid "Slide the cars to make a space so that the red car can go out of the box."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "memory-case-association-tux"
#. i18n: intro voices, see GCompris-voices/README.md - activity: "memory-case-association"
-#. +> trunk5
+#. +> trunk5 stable5
#: : input:82 input:116
#, kde-format
msgid "Match the alphabet with its upper);"
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "gnumch-equality"
#. +> trunk5 stable5
#: : input:84
#, kde-format
msgid "Guide the number eater with the arrow keys to the required numbers and press the space bar to swallow them."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "explore_world_animals"
#. +> trunk5 stable5
#: : input:86
#, kde-format
msgid "Learn about world animals and locate them on a map."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "click_on_letter_up"
#. i18n: intro voices, see GCompris-voices/README.md - activity: "click_on_letter"
#. +> trunk5 stable5
#: : input:88 input:218
#, kde-format
msgid "Click on the required letter. You can listen to it again by clicking on the mouth."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "graph-coloring"
#. +> trunk5 stable5
#: : input:90
#, kde-format
msgid "Color the graph so that no two adjacent nodes have the same color."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "money_cents"
#. +> trunk5 stable5
#: : input:92
#, kde-format
msgid "Click on the money to pay."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "braille_fun"
#. +> trunk5 stable5
#: : input:94
#, kde-format
msgid "Create the Braille cell for the letter."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "algorithm"
#. +> trunk5 stable5
#: : input:96
#, kde-format
msgid "Click on the missing items on the table and follow the logical sequence displayed above it."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "alphabet-sequence"
#. +> trunk5 stable5
#: : input:98
#, kde-format
msgid "Move the helicopter to catch the clouds following the order of the alphabet."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "maze"
#. +> trunk5 stable5
#: : input:100
#, kde-format
msgid "Use the arrows keys or swipe the touch screen to help Tux find his way out."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "penalty"
#. +> trunk5 stable5
#: : input:104
#, kde-format
msgid "Double click or double tap on the ball to score a goal."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "categorization"
#. +> trunk5 stable5
#: : input:106
#, kde-format
msgid "Categorize the elements into the correct group"
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "land_safe"
#. +> trunk5 stable5
#: : input:108
#, kde-format
msgid "Use the arrow keys to pilot your spaceship safely onto the landing pad."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "magic-hat-minus"
#. +> trunk5 stable5
#: : input:112
#, kde-format
msgid "Click on the hat. How many stars are still hiding under the hat."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "share"
#. +> trunk5 stable5
#: : input:118
#, kde-format
msgid "Share the candies equally among the specified number of children and notice that there may be a rest left"
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "simplepaint"
#. +> trunk5 stable5
#: : input:120
#, kde-format
msgid "Select a color and paint the rectangles as you like to create a drawing."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "money_back_cents"
#. i18n: intro voices, see GCompris-voices/README.md - activity: "money_back"
#. +> trunk5 stable5
#: : input:122 input:204
#, kde-format
msgid "Click on the money at the bottom of the screen to give Tux his change."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "readingv"
#. i18n: intro voices, see GCompris-voices/README.md - activity: "readingh"
#. +> trunk5 stable5
#: : input:124 input:150
#, kde-format
msgid "Read a list of words and say if a given word is in it."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "babyshapes"
#. +> trunk5 stable5
#: : input:126
#, kde-format
msgid "Drag and drop the objects matching the shapes."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "magic-hat-plus"
#. +> trunk5 stable5
#: : input:128
#, kde-format
msgid "Count the number of stars hidden under the hat and then click on the stars to indicate their number."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "nine_men_morris"
#. +> trunk5 stable5
#: : input:130
#, kde-format
msgid "Click on the dot where you wish to place your piece and try to take all Tux's pieces."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "redraw_symmetrical"
#. +> trunk5 stable5
#: : input:132
#, kde-format
msgid "Use the drawing tools to reproduce the right-hand side symmetrical figure."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "digital_electricity"
-#. +> trunk5
+#. +> trunk5 stable5
#: : input:136
#, kde-format
msgid "Learn how the digital electricity works and create your own circuit"
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "renewable_energy"
#. +> trunk5 stable5
#: : input:138
#, kde-format
msgid "Click on the different stages that go to make up the power supply."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "align4"
#. +> trunk5 stable5
#: : input:140
#, kde-format
msgid "Click on the column where you wish your token to fall and try to align of 4 tokens before Tux."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "letter-in-word"
#. +> trunk5 stable5
#: : input:142
#, kde-format
msgid "Click on all the words containing the wanted letter."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "hanoi"
#. +> trunk5 stable5
#: : input:144
#, kde-format
msgid "Rebuild the same tower in the empty area as the one you see on the right hand side."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "number_sequence"
#. +> trunk5 stable5
#: : input:148
#, kde-format
msgid "Draw the picture by touching each number in the right sequence."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "erase_2clic"
#. +> trunk5 stable5
#: : input:152
#, kde-format
msgid "Double tap or double click on the bricks to discover the hidden picture"
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "advanced_colors"
#. +> trunk5 stable5
#: : input:154
#, kde-format
msgid "click on the required color"
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "drawletters"
#. +> trunk5 stable5
#: : input:156
#, kde-format
msgid "Click on the selected points and draw the letter"
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "lang"
#. +> trunk5 stable5
#: : input:158
#, kde-format
msgid "Select the language you want to learn then review the words before doing the exercises."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "superbrain"
#. +> trunk5 stable5
#: : input:160
#, kde-format
msgid "Find out the right combination of colors. A black pin means you found the correct colour in the correct position, a white pin means it's the correct colour but in the wrong position."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "explore_monuments"
#. +> trunk5 stable5
#: : input:162
#, kde-format
msgid "Explore Monuments around the world."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "clickgame"
#. +> trunk5 stable5
#: : input:164
#, kde-format
msgid "Catch the fish before they leave the aquarium."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "algebra_plus"
#. +> trunk5 stable5
#: : input:166
#, kde-format
msgid "Add the two numbers together and type in your answer before the balloon lands in the water"
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "roman_numerals"
#. +> trunk5 stable5
#: : input:168
#, kde-format
msgid "Learn and practice roman to arabic numerals conversion"
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "template"
#. +> trunk5 stable5
#: : input:170
#, kde-format
msgid "put here in comment the text for the intro voice"
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "fifteen"
#. +> trunk5 stable5
#: : input:172
#, kde-format
msgid "Click or drag an element next to a free space, the element will move and release its space. You must put all the pieces in the correct order. The numbers on the pieces can help you."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "gnumch-multiples"
#. +> trunk5 stable5
#: : input:174
#, kde-format
msgid "Guide the number eater with the arrow keys to the multiples of the displayed number and press space to swallow them."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "lightsoff"
#. +> trunk5 stable5
#: : input:176
#, kde-format
msgid "Click on the lamps to turn them off."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "leftright"
#. +> trunk5 stable5
#: : input:178
#, kde-format
msgid "Guess if the picture presents a left or right hand and click on the correct answer."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "submarine"
-#. +> trunk5
+#. +> trunk5 stable5
#: : input:180
#, kde-format
msgid "Drive the submarine to the right end of the screen without colliding with any objects"
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "gnumch-primes"
#. +> trunk5 stable5
#: : input:182
#, kde-format
msgid "Guide the number eater with the arrow keys to the prime numbers and press space to swallow them."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "guessnumber"
#. +> trunk5 stable5
#: : input:184
#, kde-format
msgid "Find out the number by typing a number from the range proposed."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "photo_hunter"
#. +> trunk5 stable5
#: : input:186
#, kde-format
msgid "look at the two pictures carefully and click where you see a difference"
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "erase_clic"
#. +> trunk5 stable5
#: : input:188
#, kde-format
msgid "Click or tap on the transparent bricks and discover the hidden picture."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "family_find_relative"
-#. +> trunk5
+#. +> trunk5 stable5
#: : input:190
#, kde-format
msgid "Click on a pair that defines the given relation"
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "drawnumbers"
#. +> trunk5 stable5
#: : input:192
#, kde-format
msgid "Draw the numbers by connecting the dots in the correct order."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "target"
#. +> trunk5 stable5
#: : input:194
#, kde-format
msgid "Click on the target to launch darts, then count your score!"
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "numbers-odd-even"
#. +> trunk5 stable5
#: : input:196
#, kde-format
msgid "Move the helicopter to catch the clouds having even or odd numbers"
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "watercycle"
#. +> trunk5 stable5
#: : input:198
#, kde-format
msgid "Click on the various active elements that make up the water supply. Then press the shower button for Tux."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "wordsgame"
#. +> trunk5 stable5
#: : input:200
#, kde-format
msgid "Type the words on your keyboard before they reach the ground."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "erase"
#. +> trunk5 stable5
#: : input:202
#, kde-format
msgid " Clear the window with your sponge and discover the hidden picture."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "chess_partyend"
#. +> trunk5 stable5
#: : input:208
#, kde-format
msgid "Click on a white chess piece and green boxes will appear to indicate all the movements that piece can make. Try and get the black king into checkmate."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "guesscount"
#. +> trunk5 stable5
#: : input:210
#, kde-format
msgid "Use the numbers and operations suggested to find the results proposed above."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "mining"
#. +> trunk5 stable5
#: : input:220
#, kde-format
msgid "Looking at the rockwall, you can see a sparkle somewhere. Move the mouse cursor next to this sparkle and use the mousewheel or the zoom gesture to zoom in."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "planegame"
#. +> trunk5 stable5
#: : input:222
#, kde-format
msgid "Move the helicopter with the arrow keys and catch the number in the clouds in numerical order."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "clockgame"
#. +> trunk5 stable5
#: : input:224
#, kde-format
msgid "Drag and drop the needles of the clock to display the required time"
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "tangram"
#. +> trunk5 stable5
#: : input:226
#, kde-format
msgid "Click on each object to obtain the same figure. You can change their orientation by clicking on the arrows."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "intro_gravity"
#. +> trunk5 stable5
#: : input:228
#, kde-format
msgid "Change the planets' gravitational force by moving the sliders up and down. Be careful not to crash Tux's spaceship."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "gnumch-inequality"
#. +> trunk5 stable5
#: : input:230
#, kde-format
msgid "Guide the number eater with the arrow keys to the numbers that are different from the ones displayed and press the space bar to swallow them."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "geo-country"
#. +> trunk5 stable5
#: : input:234
#, kde-format
msgid "Drag and drop the regions to complete the country maps."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "redraw"
#. +> trunk5 stable5
#: : input:236
#, kde-format
msgid "Use the drawing tools to reproduce a symmetrical figure on the right hand side."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "memory-wordnumber"
#. +> trunk5 stable5
#: : input:238
#, kde-format
msgid "Match the numeric with the word."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "explore_world_music"
#. +> trunk5 stable5
#: : input:240
#, kde-format
msgid "Click on the suitcases to learn about music from around the world."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "crane"
#. +> trunk5 stable5
#: : input:242
#, kde-format
msgid " Click on each item in turn in the left frame and move them to mirror their position in the right frame."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "canal_lock"
#. +> trunk5 stable5
#: : input:244
#, kde-format
msgid "You are responsible for the lock and you must help Tux pass through. Click on the valves to cause either a drop or an increase in the water level, and click on the gates to open or close a path."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "gnumch-factors"
#. +> trunk5 stable5
#: : input:246
#, kde-format
msgid "Guide the number eater with the arrow keys to the factors of the displayed number and press space to swallow them."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "hangman"
#. +> trunk5 stable5
#: : input:250
#, kde-format
msgid "A word is hidden, you must discover it letter by letter."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "geography"
#. +> trunk5 stable5
#: : input:252
#, kde-format
msgid "Drag and drop the objects to complete the map."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "imagename"
#. +> trunk5 stable5
#: : input:256
#, kde-format
msgid "Drag and drop each item above its name."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "money"
#. +> trunk5 stable5
#: : input:258
#, kde-format
msgid "Click or tap on the money to pay."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "instruments"
#. +> trunk5 stable5
#: : input:262
#, kde-format
msgid "Click on the correct musical instrument."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "clickanddraw"
#. +> trunk5 stable5
#: : input:264
#, kde-format
msgid "Click on the selected points and draw"
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "colors"
#. +> trunk5 stable5
#: : input:266
#, kde-format
msgid "Click on the right color"
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "reversecount"
#. +> trunk5 stable5
#: : input:268
#, kde-format
msgid "Click on the domino and validate your choice with the OK button to indicate the number of ice blocks Tux will have to follow to eat a fish."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "melody"
#. +> trunk5 stable5
#: : input:270
#, kde-format
msgid "Listen to the sound sequence played, and reproduce it by clicking on the xylophone's bars"
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "explore_farm_animals"
#. +> trunk5 stable5
#: : input:276
#, kde-format
msgid "Learn about farmyard animals and the noises that they make."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "mazerelative"
#. +> trunk5 stable5
#: : input:280
#, kde-format
msgid "Help Tux find his way out. Left and right are used to turn and up to go forward."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "align4-2players"
#. +> trunk5 stable5
#: : input:282
#, kde-format
msgid "Click on the column where you wish your token to fall and try to align 4 tokens to win."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "bargame"
#. i18n: intro voices, see GCompris-voices/README.md - activity: "bargame_2players"
#. +> trunk5 stable5
#: : input:284 input:286
#, kde-format
msgid "Click the number of balls you wish to place in the holes and then click the OK button. The winner is the one who hasn't put a ball in the red hole."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "football"
#. +> trunk5 stable5
#: : input:288
#, kde-format
msgid "Drag a line from the ball to set the speed and direction of your kick."
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "chronos"
#. +> trunk5 stable5
#: : input:290
#, kde-format
msgid "Slide the pictures into the order that tells the story"
msgstr ""
#. i18n: intro voices, see GCompris-voices/README.md - activity: "smallnumbers2"
#. +> trunk5 stable5
#: : input:292
#, kde-format
msgid "Count the number of the points on the dominoes then type the result on your keyboard."
msgid "To import an existing data file, enter its filename here. You will then describe the contents of the file below. You can leave the filename blank to construct a catalog file with a valid header, but no data."
"This button will compute the field-of-view (FOV) angle for a specific eyepiece/telescope combination. You must first specify the focal lengths of the telescope and eyepiece, and the FOV angle of the eyepiece in the above entry fields.\n"
"\n"
"The computed FOV angle (in arcminutes) will be displayed in the \"Field of view\" edit box."
"Enter the telescope focal length, in millimeters.\n"
"\n"
"This is one of the data fields required for defining a field-of-view (FOV) symbol which matches the field-of-view of a camera mounted on a telescope."
"Enter the physical size of the CCD chip or film negative.\n"
"\n"
"This is one of the data fields required for defining a field-of-view (FOV) symbol which matches the field-of-view of a camera mounted on a telescope."
"This button will compute the field-of-view (FOV) angle for a specific camera/telescope combination. You must first specify the focal length of the telescope and the size of the CCD chip or film negative.\n"
"\n"
"The computed FOV angle (in arcminutes) will be displayed in the \"Field of view\" edit box."
"This button will compute the Half Power Beam Width (HPBW) angle for a specific radiotelescope and observing wavelength combination, assuming no multibeam receiver is available at the telescope. You must first specify the diameter of the radiotelescope and the observing wavelength.\n"
"\n"
"The computed HPBW angle (in arcminutes) will be displayed in the \"Field of view\" edit box."
"<p>Frame rotation with respect to Celestial Pole. Zero degrees indicates that <span style=\" font-weight:600;\">UP</span> is pointing directly at the pole. 90 degrees indicates that <span style=\" font-weight:600;\">UP</span> is rotated 90 degrees clockwise with respect to the pole.</p>"
"<p>KStars can make use of Astrometry.net to plate solve images to aid with telescope alignment. You can use the online solver without any changes. To use the offline solver, you need to verify that certain programs are installed and that astrometry is configured properly. KStars for Mac includes Astrometry.net</p>"
"<p>To plate solve, you also need to put index files in the following folder. You can install the files that you need inside Ekos. You can also download them from the internet. See the documentation at this link: <a href=\"http://astrometry.net/doc/readme.html\"><span style=\" text-decoration: underline; color:#0000ff;\">Astrometry Readme</span></a> for details on how to get files. Note that you do not need all of the index files, the ones you need depend on your field size.</p>"
"<p>Your data directory was not found. You can click the button below to copy a default KStars data directory to the correct location, or if you have a KStars directory already some place else, you can exit KStars and copy it to that location yourself.</p>"
msgid "Installing this in your data directory will enable the CCD Simulator in KStars to take realistic images. This is useful for testing sequences, plate solving, and learning to use KStars. Just click the button to install or unzip the zip file and place the gsc folder in the data directory."
"<p>You may now download optional data files to enhance KStars, such as Messier object images, or a more complete NGC/IC catalog. Press the <b>Download Extra Data</b> button to proceed. </p>"
"<p>You can also use this tool later, by selecting <b>Download New Data</b> from the <b>File</b> menu.</p>"
msgid "Are you sure you want to clear all of the solution points?"
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:1448
#, kde-format
msgid "Clear Solution Points"
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:1464
#, kde-format
msgid "Are you sure you want to clear all the alignment points?"
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:1465
#, kde-format
msgid "Clear Align Points"
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:1614
#, kde-format
msgid "The Mount Model Tool is Reset."
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:1651
#, kde-format
msgid "Please Check the Alignment Points."
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:1658
#, kde-format
msgid "In the Align Module, \"Nothing\" is Selected for the Solver Action. This means that the mount model tool will not sync/align your mount but will only report the pointing model errors. Do you wish to Continue?"
msgid "Blind solver takes a very long time to solve but can reliably solve any image any where in the sky given enough time."
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:2688
#, kde-format
msgid "Use existing settings"
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:2689
#, kde-format
msgid "Mount must be pointing close to the target location and current field of view must match the image's field of view."
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:2692
#, kde-format
msgid "No metadata is available in this image. Do you want to use the blind solver or the existing solver settings?"
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:2694
#, kde-format
msgid "Astrometry solver"
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:2750
#, kde-format
msgid "Solver iteration #%1"
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:2788
#, kde-format
msgid "Solver RA (%1) DEC (%2) Orientation (%3) Pixel Scale (%4)"
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:2796
#, kde-format
msgid "Current focal length is %1 mm while computed focal length from the solver is %2 mm. Please update the mount focal length to obtain accurate results."
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:2912
#, kde-format
msgid "WCS information updated. Images captured from this point forward shall have valid WCS."
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:2928
#, kde-format
msgid "Solution coordinates: RA (%1) DEC (%2) Telescope Coordinates: RA (%3) DEC (%4)"
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:2934
#, kde-format
msgid "Target is within %1 degrees of solution coordinates."
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:2987
#, kde-format
msgid "Setting position angle to %1 degrees E of N..."
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:3014
#, kde-format
msgid "Maximum number of iterations reached. Solver failed."
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:3046
#, kde-format
msgid "Target is within acceptable range. Astrometric solver is successful."
msgid "Slewing to calibration position, please wait until telescope completes slewing."
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:4066
#, kde-format
msgid "Load Image"
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:4231
#, kde-format
msgid "World Coordinate System (WCS) is enabled. CCD rotation must be set either manually in the CCD driver or by solving an image before proceeding to capture any further images, otherwise the WCS information may be invalid."
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:4240
#, kde-format
msgid "World Coordinate System (WCS) is disabled."
msgid "Please wait while WCS data is processed..."
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:4820
#, kde-format
msgid "Error creating WCS file: %1"
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:4871
#, kde-format
msgid "WCS data processing is complete."
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:4880
#, kde-format
msgid "WCS info is now valid. Capturing next frame..."
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:4909
#, kde-format
msgid "Failed to process World Coordinate System: %1. Try again."
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:4919
#, kde-format
msgid "Celestial pole is located outside of the field of view. Would you like to sync and slew the telescope to the celestial pole? WARNING: Slewing near poles may cause your mount to end up in unsafe position. Proceed with caution."
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:4935
#, kde-format
msgid "Warning: Celestial pole is located outside the field of view. Move the mount closer to the celestial pole."
msgstr ""
#. +> trunk5
#: ekos/align/align.cpp:4948
#, kde-format
msgid "Error: Failed to load WCS data in file: %1"
msgid "Accuracy threshold in arcseconds between solution and target coordinates. Plate solver shall be repeatedly executed until the solution coordinates are below the accuracy threshold"
"<p>Use astrometry solver on remote machine running INDI server. You must select <b>Astrometry</b> driver from Auxiliary drivers in your Ekos devices profile for this option to be enabled.</p>"
"<p>The results from Astrometric Solutions from the Capture and Solve Tool, the Load and Slew Tool, and the Mount Model Tool will be displayed below.</p>"
"<p>Remove the selected row from the solutions table. This can be useful for getting rid of results that did not actually solve from the table and/or results that you do not need any more. It can clean up clutter on both the graph and table.</p>"
"<p>Launch the mount model tool. This tool enables you to create pre-programmed list of points to go to and solve. It can aid in building a pointing model for better accuracy.</p>"
"<p>This tool provides a simple method to polar align a German equatorial mount. <span style=\" font-weight:600;\">Unpark</span> your mount, <span style=\" font-weight:600;\">Point</span> toward the celestial pole, and <span style=\" font-weight:600;\">Engage</span> sidereal tracking.</p>"
"<p>Click <span style=\" font-weight:600;\">Start</span> to begin the process.</p>"
"<p>The assistant requires three images to find a solution. The first image shall now be captured and solved. Click <span style=\" font-weight:600;\">Capture</span> to start.</p>"
"<p>Select direction and range of <span style=\" font-style:italic;\">first</span> mount rotation, then click <span style=\" font-weight:600;\">Rotate</span> to continue. To automate the rest of the process, check <span style=\" font-weight:600;\">Auto Mode</span>.</p>"
"<p>Correction vector is plotted above. Select a bright star to reposition the correction vector. Click <span style=\" font-weight:600;\">Next</span> when done.</p>"
"<p>Adjust mount's Altitude and Azimuth knobs until the selected star is centered within the crosshair. Click <span style=\" font-weight:600;\">Refresh</span> to begin continuous capture. Click <span style=\" font-weight:600;\">Done</span> when star is centered.</p>"
"<p>This tool can help your mount build a better pointing model by moving the mount to different points in the sky and solving captured images. This can increase the accuracy of your GOTOs. To qualify, your mount must be capable of improving its internal pointing model after each <b>Sync</b> commanded by Ekos. If this is not the case, then this tool is not suitable for your mount.</p>"
"<p>The Number of points the wizard should generate. If this number is less than 5, it will generate them at the same DEC. After that they will be evenly distributed over RA and DEC. Note, if Fixed DEC is selected, all of the points will be at the same DEC.</p>"
"<p>Automatically generate the specified number of alignment points in the table below. They will be generated based on the options selected in this wizard.</p>"
"<p>Select the type of objects/points added by the wizard.</p>"
"<p><span style=\" font-weight:600;\">Note:</span> all of the options except Fixed DEC start with a grid of RA/DEC points.</p>"
"\n"
"<ul>\n"
"<li><b>Any Stars:</b> The wizard searches for the nearest star.</li>"
"\n"
"<li><b>Any object:</b> The wizard searches for the nearest object of any type.</li>"
"\n"
"<li><b>Named Stars</b> The wizard searches for the nearest star in the currently visible star list. Note that the first named star might be fairly far from the intended point and also sometimes the same star could be the closest one for multiple points.</li>"
"\n"
"<li><b>Fixed DEC:</b> The wizard generates all points at the chosen DEC.</li>"
"\n"
"<li><b>Fixed Grid:</b> The wizard just uses the original grid without trying to pair it with objects.</li>"
"<p>These are the common names for the named stars that are currently up at your location. If you select a star, it will be added to the table below.</p>"
"<p>These are the Greek names for the brighter stars that are currently up at your location. If you select a star, it will be added to the table below.</p>"
"<p>Clear the entire table of alignment points below. Note that this will not affect your mount in any way. It will not clear your pointing model. It just clears the list of points so that if you run the mount model routine again, these points will not be included.</p>"
"<p>Remove the selected row from the alignment point table below. Note that it does <b>not</b> command your mount to clear that point from the model, it just means that if you run the mount model routine, that point will not be included in the list.</p>"
"<p>Add an empty row to the alignment list so that you can manually add an RA and DE for a position you would like the telescope to slew to when doing the mount model routine.</p>"
"<p>Open the Find Object dialog so that you can select an object to get an RA and DEC automatically that you would like the telescope to slew to when doing the mount model routine.</p>"
"<p>Sort the alignment points, starting with the point closest to the current telescope position, to try to minimize the distance between each slew.</p>"
"<p>This is a table of alignment points that you would like the mount model routine to use in aligning your telescope. If you would like to add or remove points, you may use the buttons above. If you would like to run, pause, or stop the mount model routine, you may use the buttons below. You can directly edit an RA or DE for a particular point directly in the cells. Just be sure to follow the format hh:mm:ss. The object name is just provided for convenience and is not used. If you want to change the order of the alignment points, you can drag the row up or down using the vertical header for that row on the left. </p>"
"<p>Start or pause the mount model routine. It will slew to and astrometrically solve the list of points in the table above using the settings in the align module. If the routine was previously paused, it will pick up where it left off. If it was stopped or it had finished it will start the routine over again.</p>"
"<p>Stop the mount model routine. It will <b>not</b> clear any points from your telescope's pointing model. It will stop the routine and any points currently being solved. If you run the mount model again after hitting stop, it will start the routine over again with the first point.</p>"
"</body></html>"
msgstr ""
#. +> trunk5
#: ekos/align/offlineastrometryparser.cpp:68
#, kde-format
msgid "Failed to find astrometry.net binaries. Please ensure astrometry.net is installed and try again."
msgstr ""
#. +> trunk5
#: ekos/align/offlineastrometryparser.cpp:69
#, kde-format
msgid "Missing astrometry files"
msgstr ""
#. +> trunk5
#: ekos/align/offlineastrometryparser.cpp:93
#, kde-format
msgid "Detected Astrometry.net version %1"
msgstr ""
#. +> trunk5
#: ekos/align/offlineastrometryparser.cpp:98
#, kde-format
msgid "Setting astrometry option --no-fits2fits"
msgstr ""
#. +> trunk5
#: ekos/align/offlineastrometryparser.cpp:103
#, kde-format
msgid "Turning off option --no-fits2fits"
msgstr ""
#. +> trunk5
#: ekos/align/offlineastrometryparser.cpp:188
#, kde-format
msgid "Index file %1 is missing. Astrometry.net would not be able to adequately solve plates until you install the missing index files. Download the index files from http://www.astrometry.net"
msgstr ""
#. +> trunk5
#: ekos/align/offlineastrometryparser.cpp:192
#, kde-format
msgid "Index files %1 to %2 are missing. Astrometry.net would not be able to adequately solve plates until you install the missing index files. Download the index files from http://www.astrometry.net"
msgstr ""
#. +> trunk5
#: ekos/align/offlineastrometryparser.cpp:212
#: ekos/align/opsastrometrycfg.cpp:48
#: ekos/align/opsastrometryindexfiles.cpp:211
#, kde-format
msgid ""
"Astrometry configuration file corrupted or missing: %1\n"
"Please set the configuration file full path in INDI options."
msgstr ""
#. +> trunk5
#: ekos/align/offlineastrometryparser.cpp:234
#: ekos/align/opsastrometryindexfiles.cpp:233
#, kde-format
msgid "Unable to find data dir in astrometry configuration file."
msgstr ""
#. +> trunk5
#: ekos/align/offlineastrometryparser.cpp:284
#, kde-format
msgid "Error starting solver: %1"
msgstr ""
#. +> trunk5
#: ekos/align/offlineastrometryparser.cpp:302
#, kde-format
msgid "Starting solver..."
msgstr ""
#. +> trunk5
#: ekos/align/offlineastrometryparser.cpp:335
#: ekos/align/remoteastrometryparser.cpp:241
#, kde-format
msgid "Solver failed. Try again."
msgstr ""
#. +> trunk5
#: ekos/align/offlineastrometryparser.cpp:359
#, kde-format
msgid "WCS header missing or corrupted. Solver failed."
msgstr ""
#. +> trunk5
#: ekos/align/offlineastrometryparser.cpp:392
#: ekos/align/onlineastrometryparser.cpp:476
#: ekos/align/remoteastrometryparser.cpp:283
#, kde-format
msgid "Solver completed in %1 second."
msgid_plural "Solver completed in %1 seconds."
msgstr[0] ""
msgstr[1] ""
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:73
#, kde-format
msgid "Error: No connection to the internet."
msgstr ""
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:181
#, kde-format
msgid "Failed to open file %1. %2"
msgstr ""
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:252
#, kde-format
msgid "Uploading file..."
msgstr ""
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:325
#, kde-format
msgid "JSon error during parsing (%1)."
msgstr ""
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:343
#, kde-format
msgid "Astrometry.net authentication failed. Check the validity of the Astrometry.net API Key."
msgstr ""
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:351
#, kde-format
msgid "Authentication to astrometry.net is successful. Session: %1"
msgstr ""
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:360
#, kde-format
msgid "Upload failed."
msgstr ""
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:369
#, kde-format
msgid "Parsing submission ID failed."
msgstr ""
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:374
#, kde-format
msgid "Upload complete. Waiting for astrometry.net solver to complete..."
msgstr ""
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:397
#, kde-format
msgid "Failed to retrieve job ID."
msgstr ""
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:420
#, kde-format
msgid "Solver timed out."
msgstr ""
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:430
#, kde-format
msgid "Solver failed after %1 second."
msgid_plural "Solver failed after %1 seconds."
msgstr[0] ""
msgstr[1] ""
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:440
#, kde-format
msgid "Error parsing parity."
msgstr ""
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:447
#, kde-format
msgid "Error parsing orientation."
msgstr ""
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:455
#, kde-format
msgid "Error parsing RA."
msgstr ""
#. +> trunk5
#: ekos/align/onlineastrometryparser.cpp:462
#: ekos/align/onlineastrometryparser.cpp:470
#, kde-format
msgid "Error parsing DEC."
msgstr ""
#. +> trunk5
#: ekos/align/opsalign.cpp:35
#, kde-format
msgid "Internal or External Plate Solver?"
msgstr ""
#. +> trunk5
#: ekos/align/opsalign.cpp:40
#, kde-format
msgid "Internal or External astrometry.cfg?"
msgstr ""
#. i18n: ectx: label, entry (AstrometryWCSIsInternal), group (Align)
"<p>On Load & Slew, solve the image and slew the mount to the target location and then rotate the camera to match the orientation of the FITS image.</p>"
"<p>Rotator threshold in arc-minutes when using Load & Slew. If the difference between measured position angle and FITS position angle is below this value, the Load & Slew operation is considered successful.</p>"
"<p>This option should <span style=\" font-weight:600;\">ONLY</span> be checked if your astrometry.net version is 0.67 or earlier. Uncheck for any versions greater than 0.67</p>"
"<p>This will prevent the solver from looking at an already existing WCS Header before blindly trying to solve the image. It is recommended to keep it checked.</p>"
"<p>Do not use Sync when Slew to Target is selected. Use differential slewing to correct for discrepancies. This is useful on some mounts (e.g. Paramount).</p>"
"<p><span style=\" font-weight:600;\">Offline</span> astrometry.net solver requires index files in order to solve an image. The following list provides a complete list of the index files, along with recommended index files to install given current CCD Field of View. Installed index files are checked. Next to each index file is an icon that represents the following:</p>"
"<p>This button will open the Astrometry Index File folder on your filesystem so that you can see where it is located and copy files into it if needed.</p>"
"<p>Enable Logs to diagnose issues with Ekos and INDI. Only enable the necessary logs to help in diagnosing specific problems. Logs consume resources and may slow the system down. Turn off logs when no longer used.</p>"
"<p>Accept ADU values that fall within this range around the desired ADU target. For example, if the ADU value was set to 10000 and the tolerance was set to 100, then frames with ADU values f 9900 and 10100 shall be accepted.</p>"
"<li><strong>Client</strong>: Captured images are only uploaded to Ekos.</li>"
"\n"
"<li><strong>Local</strong>: Captured images are only saved locally on the remote computer.</li>"
"\n"
"<li><strong>Both</strong>: Captured images are saved on remote device <b>and</b> uploaded to Ekos.</li>"
"\n"
"</ol>"
"\n"
"<p>When selecting <i>Local</i> or <i>Both</i>, you must specify the remote directory where the remote images are saved to. By default, all captured images are uploaded to Ekos."
"<p>Command a meridian flip if the hour angle exceeds the specified value. Capture and Guiding will be suspended and resumed after the flip is complete.</p>"
"<p>Select custom properties to be set when the sequence job is executed in batch mode. After the desired property value is set in INDI Control Panel, add it to the<span style=\" font-weight:600;\"> Job Properties</span> section. Click <span style=\" font-weight:600;\">Apply</span> to record the property values.</p>"
"<p>Please fill the required information below. This is a one-time setup. You can obtain these values from your camera manual or from online sources such as <a href=\"http://www.digicamdb.com/\"><span style=\" text-decoration: underline; color:#007af4;\">Digital Camera Database</span></a>.</p>"
"<p>Position Angle (PA) is defined as degrees E of N. Zero degrees indicate frame <span style=\" font-weight:600;\">UP</span> points directly toward the celestial pole. 90 degrees indicate frame <span style=\" font-weight:600;\">UP</span> points 90 degrees counter-clockwise with respect to the celestial pole.</p>"
"<p>PA is calculated from raw rotator angle plus modifiers to match the rotation angle as measured by astrometry. Enter the modifiers manually or solve an image in the Align Module to generate them automatically.</p>"
msgid "<b>Initial</b> step size in ticks to cause a noticeable change in HFR value. For timer based focuser, it is the initial time in milliseconds to move the focuser inward or outward"
"<li><b>Iterative</b>: Moves focuser by discreet steps initially decided by the step size. Once a curve slope is calculated, further step sizes are calculated to reach optimal solution. The algorithm stops when the measured HFR is within percentage tolerance of the minimum HFR recorded in the procedure.</li>"
"\n"
"<li><b>Polynomial</b>: Starts with iterative method. Upon crossing to the other side of the V-Curve, polynomial fitting coefficients along with possible minimum solution are calculated. This algorithm can be faster than purely iterative approach given a good data set.</li>"
msgid "You must stop auto guiding before changing this setting."
msgstr ""
#. +> trunk5
#: ekos/guide/guide.cpp:2545
#, kde-format
msgid "Rapid Guiding is enabled. Guide star will be determined automatically by the CCD driver. No frames are sent to Ekos unless explicitly enabled by the user in the CCD driver settings."
msgstr ""
#. +> trunk5
#: ekos/guide/guide.cpp:2548
#, kde-format
msgid "Rapid Guiding is disabled."
msgstr ""
#. +> trunk5
#: ekos/guide/guide.cpp:2784
#, kde-format
msgctxt "Drift graphics tooltip; %1 is local time; %2 is RA deviation; %3 is DE deviation in arcseconds;"
"<p>Subframe the image around the guide star. Before checking this option, you must <span style=\" font-weight:600;\">first</span> capture an image and select a guide star. Uncheck it to take a full frame again.</p>"
msgid "Mount guiding rate. Find out the guiding rate used by your mount and update the value here to get the <b>recommended</b> value of proportional gain suitable for your mount. Setting this value <b>does not</b> change your mount guiding rate!"
"<p>Proportional term accounts for present values of the error. For example, if the error is large and positive, the guider corrective pulse will also be large and positive.</p>"
"<p>Integral term accounts for past values of the error. For example, if the current pulse is not sufficiently strong, the integral of the error will accumulate over time, and the guider will respond by applying a stronger action.</p>"
msgid "Maximum deviation to correct for using Adaptive Optics unit. If the guiding deviation exceeds this value, Ekos will guide the mount mechanically"
"<p>Drag the slider to scroll through guide history while displaying the RA and DEC error points on both graphs. Dragging to the far right will set the guide plots to display the latest guide data and autoscroll the graph.</p>"
"<p>Autoscale both Guide Graphs to their default scale. If any points are located outside this range, the view is expanded to include them (with the exception of the time axis in the drift graphics).</p>"
"<p>Lead time is the minimum time in minutes between jobs. The scheduler starts execution of a job before its scheduled startup time by this lead time. Early execution is useful as focusing, alignment, and guiding procedures may take prolonged periods to time to complete.</p>"
"<p>In case no scheduler job is scheduled for this many hours, perform a complete shutdown procedure and restart observatory operations once the next job is ready.</p>"
msgid "Maximum acceptable difference between requested and measured temperature set point. When the temperature threshold is below this value, the temperature set point request is deemed successful."
"<p>Set HFR Threshold percentage gain. When an autofocus operation is completed, the autofocus HFR value is increased by this threshold percentage value and stored within the capture module. If In-Sequence-Focus is engaged, the autofocus module only performs autofocusing procedure if current HFR value exceeds the capture module HFR threshold. Increase value to permit more relaxed changes in HFR values without requiring a full autofocus run.</p>"
"<p>In-Sequence HFR threshold value controls when the autofocus process is started. If the measured HFR value exceeds the HFR threshold, autofocus process is initiated. If the HFR threshold value is zero initially (default), then the autofocus process best HFR value is used to set the new HFR threshold, after applying the HFR threshold modifier percentage. This new HFR threshold is then used for subsequent In-Sequence focus checks. If this option is enabled, the HFR threshold value is constant and gets saved to the sequence file.</p>"
#. i18n: ectx: label, entry (MaxDarkTemperatureDiff), group (DarkLibrary)
#. +> trunk5
#: ekos/opsekos.ui:508 kstars.kcfg:1456
#, kde-format
msgid "Maximum acceptable difference between current and recorded dark frame temperature set point. When the difference exceeds this value, a new dark frame shall be captured for this set point."
"<p>Welcome to the <span style=\" font-weight:600;\">Ekos Profile Wizard!</span></p>"
"<p>Ekos is the premier observatory control and automation platform. With Ekos, you can capture images and gather scientific data with ease. This Wizard will help you create your equipment profile. You will be asked to verify some basic information. </p>"
"<p>Please click <span style=\" font-weight:600;\">next</span> to continue. </p>"
"<p><a href=\"https://github.com/knro/indiwebmanager\"><span style=\" text-decoration: underline; color:#007af4;\">INDI Web Manager</span></a> running on the Remote Computer?</p>"
"<p><span style=\" font-weight:600;\">Tip</span>: <span style=\" font-style:italic;\">INDI Web Manager</span> is a service that runs on remote devices to help you start and stop INDI services remotely.</p>"
"<p>To use Ekos with your equipment locally on Windows, you need to download and install <a href=\"http://www.cloudmakers.eu/windi/\"><span style=\" text-decoration: underline; color:#007af4;\">INDI Server for Windows</span></a>.</p>"
"<p>After installing <span style=\" font-style:italic;\">INDI Server for Windows (wINDI)</span>, establish connection with your equipment. wINDI requires <a href=\"http://www.ascom-standards.org/\"><span style=\" text-decoration: underline; color:#007af4;\">ASCOM</span></a> drivers for all your equipment, so make sure to install all necessary ASCOM drivers for your gear.</p>"
"<p>After successfully starting INDI Server in wINDI, click <span style=\" font-weight:600;\">Ready</span> to continue.</p>"
"<p><span style=\" font-weight:600;\">Tip</span>: INDI Server for Windows functionality is limited compared to the native INDI drivers on Linux. It is recommended to install native INDI on an embedded Linux device such as <a href=\"http://indilib.org/support/tutorials/169-ekos-on-raspberry-pi-complete-guide.html\"><span style=\" text-decoration: underline; color:#007af4;\">Raspberry PI</span></a>.</p>"
"<p><span style=\" font-weight:600;\">Tip</span>: External INDI Server can be <a href=\"http://www.cloudmakers.eu/indiserver/\"><span style=\" text-decoration: underline; color:#007af4;\">INDI Server for OSX</span></a> or an INDI Server launched manually locally. If unsure, select Internal INDI Server.</p>"
"<p><span style=\" font-weight:600;\">Tip</span>: Internal Guider is recommended. Using external guider applications requires additional setup instructions outside the scope of Ekos.</p>"
"<p>If the remote computer has astrometry.net installed, you can run the remote astrometry driver and use it to solve images in Ekos Align module.</p>"
"<p>Use the INDI WatchDog driver. It monitors connection between your remote equipment and Ekos. If the communication is lost between the two, the WatchDog driver goes into safe mode and executes a shutdown procedure to protect your equipment.</p>"
"<p>If you plan to use SkySafari to monitor and/or control your mount, check this box to start INDI SkySafari Server. You can connect SkySafari to this server and it shall enable you to connect and control your mount. For more details, please check the <a href=\"http://indilib.org/devices/telescopes/skysafari.html\"><span style=\" text-decoration: underline; color:#007af4;\">INDI SkySafari Documentation.</span></a></p>"
msgid "Camera's rotation angle (East of North) in degrees. To measure the angle, solve an image and use the astrometry solver solution's rotation angle"
msgid "Warning! Turning off astronomial twilight check may cause the observatory to run during daylight. This can cause irreversible damage to your equipment!"
msgid "Select optional FITS file to be used for alignment. When using FITS, specify the object or the estimated coordinates which are used to slew the mount."
msgid "Start the observation job when the object reaches culmination adjusted for the offset value in minutes. By default, the observation job runs 60 minutes prior to culmination."
"<p>One-time startup procedure to be executed before starting Ekos. The script is executed <span style=\" font-weight:600; text-decoration: underline;\">before</span> the startup procedures (e.g. unpark scope), if selected, are executed.</p>"
"<p>One-time shutdown procedure to be executed after all scheduler jobs are completed. The script is executed <span style=\" font-weight:600; text-decoration: underline;\">after</span> the shutdown procedures (e.g. parking), if selected, are completed.</p>"
"<li style=\" margin-top:12px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-weight:600;\">Auto Debayer</span>: Bayered images will not be debayered. Only grayscale images are shown.</li>"
"<li style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-weight:600;\">Auto WCS</span>: World Coordinate System data will not be processed. WCS maps sky coordinates to image coordinates. Equatorial grid lines, object identification, and telescope slew within an image are disabled.</li>"
"<li style=\" margin-top:0px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-weight:600;\">3D Cube</span>: RGB images will not be processed. Only grayscale images are shown.</li>"
"<p>Automatically load World-Coordinate-System (WCS) data when opening a FITS file.</p>"
"<p><span style=\" font-weight:600;\">Warning: Only enable this option on very fast machines as it can lead to unpredictable behavior resulting in crashes on slower machines.</span></p>"
"<p>GPS/Mount devices are the master source of time and location settings. KStars time and location settings are synchronized with GPS/Mount settings.</p>"
"<p>Set SER video <b>remote</b> directory name. If INDI server is running locally, then a local directory can be selected. However, if you are connected to a remote INDI server, then the directory must be a valid directory on the remote file system where it is saved.</p>"
"\n"
"<p>Record directories may contain some patterns to make them dynamic:</p>"
"Verify if the following time, date, and location settings are correct. If any of the settings are incorrect, you can correct them via the <tt>Set time</tt> and <tt>Set Location</tt> buttons.\n"
"Enter the port number your telescope is connected to. If you only have one serial port in your computer, the port is usually <tt>/dev/ttyUSB0</tt>\n"
"<br>"
"<br>"
"If you are unsure about the port number, you can leave the field empty and KStars will try to scan the ports for attached telescopes. Beware that the autoscan process might take a few minutes to complete. "
msgid "Switch to horizonal view (Horizontal &Coordinates)"
msgstr ""
#. i18n: ectx: label, entry (PositionTimeBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:9
#, kde-format
msgid "Position of the time InfoBox."
msgstr ""
#. i18n: ectx: whatsthis, entry (PositionTimeBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:10
#, kde-format
msgid "The screen coordinates of the Time InfoBox."
msgstr ""
#. i18n: ectx: label, entry (PositionFocusBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:14
#, kde-format
msgid "Position of the focus InfoBox."
msgstr ""
#. i18n: ectx: whatsthis, entry (PositionFocusBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:15
#, kde-format
msgid "The screen coordinates of the Focus InfoBox."
msgstr ""
#. i18n: ectx: label, entry (PositionGeoBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:19
#, kde-format
msgid "Position of the geographic InfoBox."
msgstr ""
#. i18n: ectx: whatsthis, entry (PositionGeoBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:20
#, kde-format
msgid "The screen coordinates of the Geographic Location InfoBox."
msgstr ""
#. i18n: ectx: label, entry (ShadeTimeBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:24
#, kde-format
msgid "Is the time InfoBox in the \"shaded\" state?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShadeTimeBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:25
#, kde-format
msgid "If true, the Time InfoBox will show only its top line of data."
msgstr ""
#. i18n: ectx: label, entry (ShadeFocusBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:29
#, kde-format
msgid "Is the focus InfoBox in the \"shaded\" state?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShadeFocusBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:30
#, kde-format
msgid "If true, the Focus InfoBox will show only its top line of data."
msgstr ""
#. i18n: ectx: label, entry (ShadeGeoBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:34
#, kde-format
msgid "Is the geographic InfoBox in the \"shaded\" state?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShadeGeoBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:35
#, kde-format
msgid "If true, the Geographic Location InfoBox will show only its top line of data."
msgstr ""
#. i18n: ectx: label, entry (ShowInfoBoxes), group (GUI)
#. +> trunk5
#: kstars.kcfg:39
#, kde-format
msgid "Meta-option to toggle display of all InfoBoxes"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowInfoBoxes), group (GUI)
#. +> trunk5
#: kstars.kcfg:40
#, kde-format
msgid "Toggles display of all three InfoBoxes."
msgstr ""
#. i18n: ectx: label, entry (ShowTimeBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:44
#, kde-format
msgid "Display the time InfoBox?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowTimeBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:45
#, kde-format
msgid "Toggles display of the Time InfoBox."
msgstr ""
#. i18n: ectx: label, entry (ShowFocusBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:49
#, kde-format
msgid "Display the focus InfoBox?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowFocusBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:50
#, kde-format
msgid "Toggles display of the Focus InfoBox."
msgstr ""
#. i18n: ectx: label, entry (ShowGeoBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:54
#, kde-format
msgid "Display the geographic InfoBox?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowGeoBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:55
#, kde-format
msgid "Toggles display of the Geographic Location InfoBox."
msgstr ""
#. i18n: ectx: label, entry (StickyTimeBox), group (GUI)
#. i18n: ectx: label, entry (StickyFocusBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:59 kstars.kcfg:66
#, kde-format
msgid "Time InfoBox anchor flag"
msgstr ""
#. i18n: ectx: whatsthis, entry (StickyTimeBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:60
#, kde-format
msgid "Is the Time InfoBox anchored to a window edge? 0 = not anchored; 1 = anchored to right edge; 2 = anchored to bottom edge; 3 = anchored to bottom and right edges."
msgstr ""
#. i18n: ectx: whatsthis, entry (StickyFocusBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:67
#, kde-format
msgid "Is the Focus InfoBox anchored to a window edge? 0 = not anchored; 1 = anchored to right edge; 2 = anchored to bottom edge; 3 = anchored to bottom and right edges."
msgstr ""
#. i18n: ectx: label, entry (StickyGeoBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:73
#, kde-format
msgid "Geographic InfoBox anchor flag"
msgstr ""
#. i18n: ectx: whatsthis, entry (StickyGeoBox), group (GUI)
#. +> trunk5
#: kstars.kcfg:74
#, kde-format
msgid "Is the Geographic Location InfoBox anchored to a window edge? 0 = not anchored; 1 = anchored to right edge; 2 = anchored to bottom edge; 3 = anchored to bottom and right edges."
msgstr ""
#. i18n: ectx: label, entry (ShowStatusBar), group (GUI)
#. +> trunk5
#: kstars.kcfg:80
#, kde-format
msgid "Display the statusbar?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowStatusBar), group (GUI)
#. +> trunk5
#: kstars.kcfg:81
#, kde-format
msgid "Toggle display of the status bar."
msgstr ""
#. i18n: ectx: label, entry (ShowAltAzField), group (GUI)
#. +> trunk5
#: kstars.kcfg:85
#, kde-format
msgid "Display Alt/Az coordinates in the statusbar?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowAltAzField), group (GUI)
#. +> trunk5
#: kstars.kcfg:86
#, kde-format
msgid "Toggle display of the Horizontal coordinates of the mouse cursor in the status bar."
msgstr ""
#. i18n: ectx: label, entry (ShowRADecField), group (GUI)
#. +> trunk5
#: kstars.kcfg:90
#, kde-format
msgid "Display RA/Dec coordinates in the statusbar?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowRADecField), group (GUI)
#. +> trunk5
#: kstars.kcfg:91
#, kde-format
msgid "Toggle display of the Equatorial coordinates of the mouse cursor at the current epoch in the status bar."
msgstr ""
#. i18n: ectx: label, entry (ShowJ2000RADecField), group (GUI)
#. +> trunk5
#: kstars.kcfg:95
#, kde-format
msgid "Display J2000.0 RA/Dec coordinates in the statusbar?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowJ2000RADecField), group (GUI)
#. +> trunk5
#: kstars.kcfg:96
#, kde-format
msgid "Toggle display of the Equatorial coordinates of the mouse cursor at the standard epoch in the status bar."
msgstr ""
#. i18n: ectx: label, entry (ShowSensorFOV), group (GUI)
#. +> trunk5
#: kstars.kcfg:100
#, kde-format
msgid "Display CCD sensor angular size on the sky map?"
msgstr ""
#. i18n: ectx: label, entry (WindowWidth), group (GUI)
#. +> trunk5
#: kstars.kcfg:104
#, kde-format
msgid "Width of main window, in pixels"
msgstr ""
#. i18n: ectx: label, entry (WindowHeight), group (GUI)
#. +> trunk5
#: kstars.kcfg:108
#, kde-format
msgid "Height of main window, in pixels"
msgstr ""
#. i18n: ectx: label, entry (RunStartupWizard), group (GUI)
#. +> trunk5
#: kstars.kcfg:112
#, kde-format
msgid "Run Startup Wizard when KStars launches?"
msgstr ""
#. i18n: ectx: label, entry (CurrentTheme), group (GUI)
#. +> trunk5
#: kstars.kcfg:116
#, kde-format
msgid "Current application theme"
msgstr ""
#. i18n: ectx: label, entry (CatalogFile), group (Catalogs)
#. +> trunk5
#: kstars.kcfg:123
#, kde-format
msgid "Filenames of defined custom object catalogs."
msgstr ""
#. i18n: ectx: whatsthis, entry (CatalogFile), group (Catalogs)
#. +> trunk5
#: kstars.kcfg:124
#, kde-format
msgid "List of the filenames of custom object catalogs."
msgstr ""
#. i18n: ectx: label, entry (ShowCatalog), group (Catalogs)
#. +> trunk5
#: kstars.kcfg:127
#, kde-format
msgid "List of toggles for displaying custom object catalogs."
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowCatalog), group (Catalogs)
#. +> trunk5
#: kstars.kcfg:128
#, kde-format
msgid "List of integers toggling display of each custom object catalog (any nonzero value indicates the objects in that catalog will be displayed)."
msgstr ""
#. i18n: ectx: label, entry (ShowCatalogNames), group (Catalogs)
#. +> trunk5
#: kstars.kcfg:131
#, kde-format
msgid "List for displaying custom object catalogs."
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowCatalogNames), group (Catalogs)
#. +> trunk5
#: kstars.kcfg:132
#, kde-format
msgid "List of names for which custom catalogs are to be displayed."
msgstr ""
#. i18n: ectx: label, entry (ResolveNamesOnline), group (Catalogs)
#. +> trunk5
#: kstars.kcfg:135
#, kde-format
msgid "Resolve names using online services."
msgstr ""
#. i18n: ectx: whatsthis, entry (ResolveNamesOnline), group (Catalogs)
#. +> trunk5
#: kstars.kcfg:136
#, kde-format
msgid "Names of objects entered into the find dialog are resolved using online services and stored in the database. This option also toggles the display of such resolved objects on the sky map."
msgstr ""
#. i18n: ectx: label, entry (INDIWindowWidth), group (indi)
#. +> trunk5
#: kstars.kcfg:143
#, kde-format
msgid "INDI window width"
msgstr ""
#. i18n: ectx: label, entry (INDIWindowHeight), group (indi)
#. +> trunk5
#: kstars.kcfg:147
#, kde-format
msgid "INDI window height"
msgstr ""
#. i18n: ectx: label, entry (useGeographicUpdate), group (indi)
#. i18n: ectx: label, entry (useTimeUpdate), group (indi)
#. +> trunk5
#: kstars.kcfg:155
#, kde-format
msgid "Automatically updates time and date?"
msgstr ""
#. i18n: ectx: label, entry (independentWindowINDI), group (indi)
#. +> trunk5
#: kstars.kcfg:159
#, kde-format
msgid "Make INDI Control Panel window independent of KStars main window"
msgstr ""
#. i18n: ectx: label, entry (showTargetCrosshair), group (indi)
#. +> trunk5
#: kstars.kcfg:163
#, kde-format
msgid "Draw crosshairs at telescope position in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (showTargetCrosshair), group (indi)
#. +> trunk5
#: kstars.kcfg:164
#, kde-format
msgid "Toggle display of crosshairs centered at telescope's pointed position in the KStars sky map."
msgstr ""
#. i18n: ectx: label, entry (showINDIMessages), group (indi)
#. +> trunk5
#: kstars.kcfg:168
#, kde-format
msgid "Display INDI messages in the statusbar?"
msgstr ""
#. i18n: ectx: whatsthis, entry (showINDIMessages), group (indi)
#. +> trunk5
#: kstars.kcfg:169
#, kde-format
msgid "Toggle display of INDI messages in the KStars statusbar."
msgstr ""
#. i18n: ectx: label, entry (messageNotificationINDI), group (indi)
#. +> trunk5
#: kstars.kcfg:173
#, kde-format
msgid "INDI message notifications"
msgstr ""
#. i18n: ectx: whatsthis, entry (messageNotificationINDI), group (indi)
#. +> trunk5
#: kstars.kcfg:174
#, kde-format
msgid "Show INDI messages as desktop notifications instead of dialogs."
msgstr ""
#. i18n: ectx: label, entry (useComputerSource), group (indi)
#. +> trunk5
#: kstars.kcfg:178
#, kde-format
msgid "Use computer time and location for synchronization?"
msgstr ""
#. i18n: ectx: label, entry (useDeviceSource), group (indi)
#. +> trunk5
#: kstars.kcfg:182
#, kde-format
msgid "Use device time and location for synchronization?"
msgstr ""
#. i18n: ectx: label, entry (fitsDir), group (indi)
#. +> trunk5
#: kstars.kcfg:186
#, kde-format
msgid "FITS Default directory"
msgstr ""
#. i18n: ectx: whatsthis, entry (fitsDir), group (indi)
#. +> trunk5
#: kstars.kcfg:187
#, kde-format
msgid "The default location of saved FITS files"
msgstr ""
#. i18n: ectx: label, entry (serverPortStart), group (indi)
#. +> trunk5
#: kstars.kcfg:191
#, kde-format
msgid "INDI Server Start Port"
msgstr ""
#. i18n: ectx: whatsthis, entry (serverPortStart), group (indi)
#. +> trunk5
#: kstars.kcfg:192
#, kde-format
msgid "INDI server will attempt to bind with ports starting from this port"
msgstr ""
#. i18n: ectx: label, entry (serverPortEnd), group (indi)
#. +> trunk5
#: kstars.kcfg:196
#, kde-format
msgid "INDI Server Final Port"
msgstr ""
#. i18n: ectx: whatsthis, entry (serverPortEnd), group (indi)
#. +> trunk5
#: kstars.kcfg:197
#, kde-format
msgid "INDI server will attempt to bind with ports ending with this port"
msgstr ""
#. i18n: ectx: label, entry (filterAlias), group (indi)
#. +> trunk5
#: kstars.kcfg:201
#, kde-format
msgid "Aliases for filter wheel slots."
msgstr ""
#. i18n: ectx: whatsthis, entry (filterAlias), group (indi)
#. +> trunk5
#: kstars.kcfg:202
#, kde-format
msgid "List of the aliases for filter wheel slots."
msgstr ""
#. i18n: ectx: label, entry (indiServer), group (indi)
#. i18n: ectx: whatsthis, entry (indiServer), group (indi)
#. +> trunk5
#: kstars.kcfg:205 kstars.kcfg:206
#, kde-format
msgid "PATH to indiserver binary"
msgstr ""
#. i18n: ectx: label, entry (indiDriversDir), group (indi)
#. i18n: ectx: whatsthis, entry (indiDriversDir), group (indi)
#. +> trunk5
#: kstars.kcfg:214 kstars.kcfg:215
#, kde-format
msgid "PATH to indi drivers directory"
msgstr ""
#. i18n: ectx: label, entry (indiDriversAreInternal), group (indi)
#. i18n: ectx: label, entry (AstrometrySolverIsInternal), group (Align)
#. +> trunk5
#: kstars.kcfg:219 kstars.kcfg:1824
#, kde-format
msgid "Internal or External Astrometry Solver?"
msgstr ""
#. i18n: ectx: label, entry (streamWindowWidth), group (indi)
#. +> trunk5
#: kstars.kcfg:223
#, kde-format
msgid "Video streaming window width"
msgstr ""
#. i18n: ectx: label, entry (streamWindowHeight), group (indi)
#. +> trunk5
#: kstars.kcfg:227
#, kde-format
msgid "Video streaming window height"
msgstr ""
#. i18n: ectx: label, entry (INDIMountLogging), group (indi)
#. +> trunk5
#: kstars.kcfg:231
#, kde-format
msgid "Enable INDI Mount logging"
msgstr ""
#. i18n: ectx: label, entry (INDIFocuserLogging), group (indi)
#. +> trunk5
#: kstars.kcfg:235
#, kde-format
msgid "Enable INDI Focuser logging"
msgstr ""
#. i18n: ectx: label, entry (INDICCDLogging), group (indi)
#. +> trunk5
#: kstars.kcfg:239
#, kde-format
msgid "Enable INDI CCD logging"
msgstr ""
#. i18n: ectx: label, entry (INDIFilterWheelLogging), group (indi)
#. +> trunk5
#: kstars.kcfg:243
#, kde-format
msgid "Enable INDI Filter Wheel logging"
msgstr ""
#. i18n: ectx: label, entry (INDIDomeLogging), group (indi)
#. +> trunk5
#: kstars.kcfg:247
#, kde-format
msgid "Enable INDI Dome logging"
msgstr ""
#. i18n: ectx: label, entry (INDIDetectorLogging), group (indi)
#. +> trunk5
#: kstars.kcfg:251
#, kde-format
msgid "Enable INDI Detector logging"
msgstr ""
#. i18n: ectx: label, entry (INDIWeatherLogging), group (indi)
#. +> trunk5
#: kstars.kcfg:255
#, kde-format
msgid "Enable INDI Weather logging"
msgstr ""
#. i18n: ectx: label, entry (INDIAuxiliaryLogging), group (indi)
#. +> trunk5
#: kstars.kcfg:259
#, kde-format
msgid "Enable INDI Auxiliary logging"
msgstr ""
#. i18n: ectx: label, entry (CityName), group (Location)
#. +> trunk5
#: kstars.kcfg:266
#, kde-format
msgid "City name of geographic location."
msgstr ""
#. i18n: ectx: whatsthis, entry (CityName), group (Location)
#. +> trunk5
#: kstars.kcfg:267
#, kde-format
msgid "The City name of the current geographic location."
msgstr ""
#. i18n: ectx: label, entry (ProvinceName), group (Location)
#. +> trunk5
#: kstars.kcfg:271
#, kde-format
msgid "Province name of geographic location."
msgstr ""
#. i18n: ectx: whatsthis, entry (ProvinceName), group (Location)
#. +> trunk5
#: kstars.kcfg:272
#, kde-format
msgid "The Province name of the current geographic location. This is the name of the state for locations in the U. S."
msgstr ""
#. i18n: ectx: label, entry (CountryName), group (Location)
#. +> trunk5
#: kstars.kcfg:276
#, kde-format
msgid "Country name of geographic location."
msgstr ""
#. i18n: ectx: whatsthis, entry (CountryName), group (Location)
#. +> trunk5
#: kstars.kcfg:277
#, kde-format
msgid "The Country name of the current geographic location."
msgstr ""
#. i18n: ectx: label, entry (Longitude), group (Location)
#. +> trunk5
#: kstars.kcfg:281
#, kde-format
msgid "Geographic Longitude, in degrees."
msgstr ""
#. i18n: ectx: whatsthis, entry (Longitude), group (Location)
#. +> trunk5
#: kstars.kcfg:282
#, kde-format
msgid "The longitude of the current geographic location, in decimal degrees."
msgstr ""
#. i18n: ectx: label, entry (Latitude), group (Location)
#. +> trunk5
#: kstars.kcfg:286
#, kde-format
msgid "Geographic Latitude, in degrees."
msgstr ""
#. i18n: ectx: whatsthis, entry (Latitude), group (Location)
#. +> trunk5
#: kstars.kcfg:287
#, kde-format
msgid "The latitude of the current geographic location, in decimal degrees."
msgstr ""
#. i18n: ectx: label, entry (Elevation), group (Location)
#. +> trunk5
#: kstars.kcfg:291
#, kde-format
msgid "Elevation above sea level of geographic location, in meters."
msgstr ""
#. i18n: ectx: label, entry (TimeZone), group (Location)
#. +> trunk5
#: kstars.kcfg:295
#, kde-format
msgid "Time Zone offset of geographic location, in hours."
msgstr ""
#. i18n: ectx: label, entry (DST), group (Location)
#. +> trunk5
#: kstars.kcfg:299
#, kde-format
msgid "Two-letter code for daylight savings time rule used by geographic location."
msgstr ""
#. i18n: ectx: whatsthis, entry (DST), group (Location)
#. +> trunk5
#: kstars.kcfg:300
#, kde-format
msgid "Two-letter code that determines the dates on which daylight savings time begins and ends (you can view the rules by pressing the \"Explain DST Rules\" button in the Geographic Location window)."
msgstr ""
#. i18n: ectx: label, entry (UseAnimatedSlewing), group (View)
#. +> trunk5
#: kstars.kcfg:307
#, kde-format
msgid "Use animated slewing effects when changing focus position?"
msgstr ""
#. i18n: ectx: whatsthis, entry (UseAnimatedSlewing), group (View)
#. +> trunk5
#: kstars.kcfg:308
#, kde-format
msgid "If true, focus changes will cause the sky to visibly spin to the new position. Otherwise, the display will \"snap\" instantly to the new position."
msgstr ""
#. i18n: ectx: label, entry (FOVNames), group (View)
#. +> trunk5
#: kstars.kcfg:312
#, kde-format
msgid "Name of selected FOV indicators"
msgstr ""
#. i18n: ectx: whatsthis, entry (FOVNames), group (View)
#. +> trunk5
#: kstars.kcfg:313
#, kde-format
msgid "The names of the currently selected field-of-view indicators. The list of defined FOV indicator names is listed in the \"Settings|FOV Symbols\" menu."
msgstr ""
#. i18n: ectx: label, entry (FadePlanetTrails), group (View)
#. +> trunk5
#: kstars.kcfg:317
#, kde-format
msgid "Fade planet trails to background color?"
msgstr ""
#. i18n: ectx: whatsthis, entry (FadePlanetTrails), group (View)
#. +> trunk5
#: kstars.kcfg:318
#, kde-format
msgid "If true, trails attached to solar system bodies will fade into the background sky color."
msgstr ""
#. i18n: ectx: label, entry (FocusRA), group (View)
#. +> trunk5
#: kstars.kcfg:322
#, kde-format
msgid "Right Ascension of focus position"
msgstr ""
#. i18n: ectx: whatsthis, entry (FocusRA), group (View)
#. +> trunk5
#: kstars.kcfg:323
#, kde-format
msgid "The right ascension of the initial focus position of the sky map, in decimal hours. This value is volatile; it is reset whenever the program shuts down."
msgstr ""
#. i18n: ectx: label, entry (FocusDec), group (View)
#. +> trunk5
#: kstars.kcfg:327
#, kde-format
msgid "Declination of focus position"
msgstr ""
#. i18n: ectx: whatsthis, entry (FocusDec), group (View)
#. +> trunk5
#: kstars.kcfg:328
#, kde-format
msgid "The declination of the initial focus position of the sky map, in decimal degrees. This value is volatile; it is reset whenever the program shuts down."
msgstr ""
#. i18n: ectx: label, entry (FocusObject), group (View)
#. +> trunk5
#: kstars.kcfg:332
#, kde-format
msgid "Name of focused object"
msgstr ""
#. i18n: ectx: whatsthis, entry (FocusObject), group (View)
#. +> trunk5
#: kstars.kcfg:333
#, kde-format
msgid "The name of the object that should be centered and tracked on startup. If no object should be centered, set to \"nothing\". This value is volatile; it is reset whenever the program shuts down."
msgstr ""
#. i18n: ectx: label, entry (IsTracking), group (View)
#. +> trunk5
#: kstars.kcfg:337
#, kde-format
msgid "Is tracking engaged?"
msgstr ""
#. i18n: ectx: whatsthis, entry (IsTracking), group (View)
#. +> trunk5
#: kstars.kcfg:338
#, kde-format
msgid "True if the skymap should track on its initial position on startup. This value is volatile; it is reset whenever the program shuts down."
msgstr ""
#. i18n: ectx: label, entry (HideOnSlew), group (View)
#. +> trunk5
#: kstars.kcfg:342
#, kde-format
msgid "Hide objects while moving?"
msgstr ""
#. i18n: ectx: whatsthis, entry (HideOnSlew), group (View)
#. +> trunk5
#: kstars.kcfg:343
#, kde-format
msgid "Toggle whether KStars should hide some objects while the display is moving, for smoother motion."
msgstr ""
#. i18n: ectx: label, entry (HideCBounds), group (View)
#. +> trunk5
#: kstars.kcfg:347
#, kde-format
msgid "Hide constellation boundaries while moving?"
msgstr ""
#. i18n: ectx: whatsthis, entry (HideCBounds), group (View)
#. +> trunk5
#: kstars.kcfg:348
#, kde-format
msgid "Toggle whether constellation boundaries are hidden while the display is in motion."
msgstr ""
#. i18n: ectx: label, entry (HideCLines), group (View)
msgid "Draw grids according to active coordinate system?"
msgstr ""
#. i18n: ectx: whatsthis, entry (AutoSelectGrid), group (View)
#. +> trunk5
#: kstars.kcfg:503
#, kde-format
msgid "Coordinate grids will automatically change according to active coordinate system."
msgstr ""
#. i18n: ectx: label, entry (ShowEquatorialGrid), group (View)
#. +> trunk5
#: kstars.kcfg:507
#, kde-format
msgid "Draw equatorial coordinate grid in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowEquatorialGrid), group (View)
#. +> trunk5
#: kstars.kcfg:508
#, kde-format
msgid "Toggle whether the equatorial coordinate grid is drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowHorizontalGrid), group (View)
#. +> trunk5
#: kstars.kcfg:512
#, kde-format
msgid "Draw horizontal coordinate grid in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowHorizontalGrid), group (View)
#. +> trunk5
#: kstars.kcfg:513
#, kde-format
msgid "Toggle whether the horizontal coordinate grid is drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowLocalMeridian), group (View)
#. +> trunk5
#: kstars.kcfg:517
#, kde-format
msgid "Draw local meridian line in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowLocalMeridian), group (View)
#. +> trunk5
#: kstars.kcfg:518
#, kde-format
msgid "Toggle whether the local meridian line is drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowGround), group (View)
#. +> trunk5
#: kstars.kcfg:522
#, kde-format
msgid "Draw opaque ground in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowGround), group (View)
#. +> trunk5
#: kstars.kcfg:523
#, kde-format
msgid "Toggle whether the region below the horizon is opaque."
msgstr ""
#. i18n: ectx: label, entry (ShowHorizon), group (View)
#. +> trunk5
#: kstars.kcfg:527
#, kde-format
msgid "Draw horizon line in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowHorizon), group (View)
#. +> trunk5
#: kstars.kcfg:528
#, kde-format
msgid "Toggle whether the horizon line is drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowFlags), group (View)
#. +> trunk5
#: kstars.kcfg:532
#, kde-format
msgid "Draw flags in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowFlags), group (View)
#. +> trunk5
#: kstars.kcfg:533
#, kde-format
msgid "Toggle whether flags are drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowIC), group (View)
#. +> trunk5
#: kstars.kcfg:537
#, kde-format
msgid "Draw IC objects in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowIC), group (View)
#. +> trunk5
#: kstars.kcfg:538
#, kde-format
msgid "Toggle whether IC objects are drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowNGC), group (View)
#. +> trunk5
#: kstars.kcfg:542
#, kde-format
msgid "Draw NGC objects in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowNGC), group (View)
#. +> trunk5
#: kstars.kcfg:543
#, kde-format
msgid "Toggle whether NGC objects are drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowMessier), group (View)
#. +> trunk5
#: kstars.kcfg:547
#, kde-format
msgid "Draw Messier objects in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowMessier), group (View)
#. +> trunk5
#: kstars.kcfg:548
#, kde-format
msgid "Toggle whether Messier objects are drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowMessierImages), group (View)
#. +> trunk5
#: kstars.kcfg:552
#, kde-format
msgid "Draw Messier object images in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowMessierImages), group (View)
#. +> trunk5
#: kstars.kcfg:553
#, kde-format
msgid "Toggle whether Messier objects are rendered as images in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowOther), group (View)
#. +> trunk5
#: kstars.kcfg:557
#, kde-format
msgid "Draw extra deep-sky objects in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowOther), group (View)
#. +> trunk5
#: kstars.kcfg:558
#, kde-format
msgid "Toggle whether extra objects are drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowMilkyWay), group (View)
#. +> trunk5
#: kstars.kcfg:562
#, kde-format
msgid "Draw Milky Way contour in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowMilkyWay), group (View)
#. +> trunk5
#: kstars.kcfg:563
#, kde-format
msgid "Toggle whether the Milky Way contour is drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (FillMilkyWay), group (View)
#. +> trunk5
#: kstars.kcfg:567
#, kde-format
msgid "Fill Milky Way contour? (false means use outline only)"
msgstr ""
#. i18n: ectx: whatsthis, entry (FillMilkyWay), group (View)
#. +> trunk5
#: kstars.kcfg:568
#, kde-format
msgid "Toggle whether the Milky Way contour is filled. When this option is false, the Milky Way is shown as an outline."
msgstr ""
#. i18n: ectx: label, entry (ShowSolarSystem), group (View)
#. +> trunk5
#: kstars.kcfg:572
#, kde-format
msgid "Meta-option for all planets in the sky map."
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowSolarSystem), group (View)
#. +> trunk5
#: kstars.kcfg:573
#, kde-format
msgid "Meta-option to control whether all major planets (and the Sun and Moon) are drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowPlanetImages), group (View)
#. +> trunk5
#: kstars.kcfg:577
#, kde-format
msgid "Draw planets as images in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowPlanetImages), group (View)
#. +> trunk5
#: kstars.kcfg:578
#, kde-format
msgid "Toggle whether major planets (and the Sun and Moon) are rendered as images in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowPlanetNames), group (View)
#. +> trunk5
#: kstars.kcfg:582
#, kde-format
msgid "Label planet names in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowPlanetNames), group (View)
#. +> trunk5
#: kstars.kcfg:583
#, kde-format
msgid "Toggle whether major planets (and the Sun and Moon) are labeled in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowSun), group (View)
#. +> trunk5
#: kstars.kcfg:587
#, kde-format
msgid "Draw Sun in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowSun), group (View)
#. +> trunk5
#: kstars.kcfg:588
#, kde-format
msgid "Toggle whether the Sun is drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowMoon), group (View)
#. +> trunk5
#: kstars.kcfg:592
#, kde-format
msgid "Draw Moon in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowMoon), group (View)
#. +> trunk5
#: kstars.kcfg:593
#, kde-format
msgid "Toggle whether the Moon is drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowMercury), group (View)
#. +> trunk5
#: kstars.kcfg:597
#, kde-format
msgid "Draw Mercury in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowMercury), group (View)
#. +> trunk5
#: kstars.kcfg:598
#, kde-format
msgid "Toggle whether Mercury is drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowVenus), group (View)
#. +> trunk5
#: kstars.kcfg:602
#, kde-format
msgid "Draw Venus in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowVenus), group (View)
#. +> trunk5
#: kstars.kcfg:603
#, kde-format
msgid "Toggle whether Venus is drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowMars), group (View)
#. +> trunk5
#: kstars.kcfg:607
#, kde-format
msgid "Draw Mars in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowMars), group (View)
#. +> trunk5
#: kstars.kcfg:608
#, kde-format
msgid "Toggle whether Mars is drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowJupiter), group (View)
#. +> trunk5
#: kstars.kcfg:612
#, kde-format
msgid "Draw Jupiter in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowJupiter), group (View)
#. +> trunk5
#: kstars.kcfg:613
#, kde-format
msgid "Toggle whether Jupiter is drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowSaturn), group (View)
#. +> trunk5
#: kstars.kcfg:617
#, kde-format
msgid "Draw Saturn in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowSaturn), group (View)
#. +> trunk5
#: kstars.kcfg:618
#, kde-format
msgid "Toggle whether Saturn is drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowUranus), group (View)
#. +> trunk5
#: kstars.kcfg:622
#, kde-format
msgid "Draw Uranus in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowUranus), group (View)
#. +> trunk5
#: kstars.kcfg:623
#, kde-format
msgid "Toggle whether Uranus is drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowNeptune), group (View)
#. +> trunk5
#: kstars.kcfg:627
#, kde-format
msgid "Draw Neptune in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowNeptune), group (View)
#. +> trunk5
#: kstars.kcfg:628
#, kde-format
msgid "Toggle whether Neptune is drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowPluto), group (View)
#. +> trunk5
#: kstars.kcfg:632
#, kde-format
msgid "Draw Pluto in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowPluto), group (View)
#. +> trunk5
#: kstars.kcfg:633
#, kde-format
msgid "Toggle whether Pluto is drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowStars), group (View)
#. +> trunk5
#: kstars.kcfg:637
#, kde-format
msgid "Draw stars in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowStars), group (View)
#. +> trunk5
#: kstars.kcfg:638
#, kde-format
msgid "Toggle whether stars are drawn in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowStarMagnitudes), group (View)
#. +> trunk5
#: kstars.kcfg:642
#, kde-format
msgid "Label star magnitudes in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowStarMagnitudes), group (View)
#. +> trunk5
#: kstars.kcfg:643
#, kde-format
msgid "Toggle whether star magnitude (brightness) labels are shown in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowStarNames), group (View)
#. +> trunk5
#: kstars.kcfg:647
#, kde-format
msgid "Label star names in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowStarNames), group (View)
#. +> trunk5
#: kstars.kcfg:648
#, kde-format
msgid "Toggle whether star name labels are shown in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowDeepSkyMagnitudes), group (View)
#. +> trunk5
#: kstars.kcfg:652
#, kde-format
msgid "Label deep-sky object magnitudes in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowDeepSkyMagnitudes), group (View)
#. +> trunk5
#: kstars.kcfg:653
#, kde-format
msgid "Toggle whether deep-sky object magnitude (brightness) labels are shown in the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowDeepSkyNames), group (View)
#. +> trunk5
#: kstars.kcfg:657
#, kde-format
msgid "Label deep-sky objects in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowDeepSkyNames), group (View)
#. +> trunk5
#: kstars.kcfg:658
#, kde-format
msgid "Toggle whether deep-sky object name labels are shown in the sky map."
msgstr ""
#. i18n: ectx: label, entry (SlewTimeScale), group (View)
#. +> trunk5
#: kstars.kcfg:662
#, kde-format
msgid "Minimum timescale for forced-slewing mode"
msgstr ""
#. i18n: ectx: whatsthis, entry (SlewTimeScale), group (View)
#. +> trunk5
#: kstars.kcfg:663
#, kde-format
msgid "The timescale above which slewing mode is forced on at all times."
msgstr ""
#. i18n: ectx: label, entry (BoxBGMode), group (View)
#. +> trunk5
#: kstars.kcfg:667
#, kde-format
msgid "InfoBoxes Background fill mode"
msgstr ""
#. i18n: ectx: whatsthis, entry (BoxBGMode), group (View)
#. +> trunk5
#: kstars.kcfg:668
#, kde-format
msgid "The background fill mode for the on-screen information boxes: 0=\"no BG\"; 1=\"semi-transparent BG\"; 2=\"opaque BG\""
msgstr ""
#. i18n: ectx: label, entry (Projection), group (View)
#. +> trunk5
#: kstars.kcfg:672
#, kde-format
msgid "Mapping projection algorithm"
msgstr ""
#. i18n: ectx: whatsthis, entry (Projection), group (View)
#. +> trunk5
#: kstars.kcfg:673
#, kde-format
msgid "Algorithm for the mapping projection."
msgstr ""
#. i18n: ectx: label, entry (UseAbbrevConstellNames), group (View)
#. +> trunk5
#: kstars.kcfg:677
#, kde-format
msgid "Use abbreviated constellation names?"
msgstr ""
#. i18n: ectx: whatsthis, entry (UseAbbrevConstellNames), group (View)
#. +> trunk5
#: kstars.kcfg:678
#, kde-format
msgid "Use official IAU abbreviations for constellation names."
msgstr ""
#. i18n: ectx: label, entry (UseLatinConstellNames), group (View)
#. +> trunk5
#: kstars.kcfg:682
#, kde-format
msgid "Use Latin constellation names?"
msgstr ""
#. i18n: ectx: whatsthis, entry (UseLatinConstellNames), group (View)
#. +> trunk5
#: kstars.kcfg:683
#, kde-format
msgid "Use Latin constellation names."
msgstr ""
#. i18n: ectx: label, entry (UseLocalConstellNames), group (View)
#. +> trunk5
#: kstars.kcfg:687
#, kde-format
msgid "Use localized constellation names?"
msgstr ""
#. i18n: ectx: whatsthis, entry (UseLocalConstellNames), group (View)
#. +> trunk5
#: kstars.kcfg:688
#, kde-format
msgid "Use localized constellation names (if localized names are not available, default to Latin names)."
msgstr ""
#. i18n: ectx: label, entry (UseAltAz), group (View)
#. +> trunk5
#: kstars.kcfg:692
#, kde-format
msgid "Use horizontal coordinate system?"
msgstr ""
#. i18n: ectx: whatsthis, entry (UseAltAz), group (View)
#. +> trunk5
#: kstars.kcfg:693
#, kde-format
msgid "Display the sky with horizontal coordinates (when false, equatorial coordinates will be used)."
msgstr ""
#. i18n: ectx: label, entry (UseAutoLabel), group (View)
#. +> trunk5
#: kstars.kcfg:697
#, kde-format
msgid "Automatically label focused object?"
msgstr ""
#. i18n: ectx: whatsthis, entry (UseAutoLabel), group (View)
#. +> trunk5
#: kstars.kcfg:698
#, kde-format
msgid "Toggle whether a centered object automatically gets a name label attached."
msgstr ""
#. i18n: ectx: label, entry (UseAutoTrail), group (View)
#. +> trunk5
#: kstars.kcfg:702 tools/scriptbuilder.cpp:703
#, kde-format
msgid "Automatically add trail to centered solar system body?"
msgstr ""
#. i18n: ectx: whatsthis, entry (UseAutoTrail), group (View)
#. +> trunk5
#: kstars.kcfg:703
#, kde-format
msgid "Toggle whether a centered solar system object automatically gets a trail attached, as long as it remains centered."
msgstr ""
#. i18n: ectx: label, entry (UseHoverLabel), group (View)
#. +> trunk5
#: kstars.kcfg:707
#, kde-format
msgid "Add temporary label on mouse hover?"
msgstr ""
#. i18n: ectx: whatsthis, entry (UseHoverLabel), group (View)
#. +> trunk5
#: kstars.kcfg:708
#, kde-format
msgid "Toggle whether the object under the mouse cursor gets a transient name label."
msgstr ""
#. i18n: ectx: label, entry (UseRefraction), group (View)
#. +> trunk5
#: kstars.kcfg:712
#, kde-format
msgid "Correct positions for atmospheric refraction?"
msgstr ""
#. i18n: ectx: whatsthis, entry (UseRefraction), group (View)
#. +> trunk5
#: kstars.kcfg:713
#, kde-format
msgid "Toggle whether object positions are corrected for the effects of atmospheric refraction (only applies when horizontal coordinates are used)."
msgstr ""
#. i18n: ectx: label, entry (UseRelativistic), group (View)
#. +> trunk5
#: kstars.kcfg:717
#, kde-format
msgid "Apply relativistic corrections due to the bending of light in sun's gravitational field"
msgstr ""
#. i18n: ectx: whatsthis, entry (UseRelativistic), group (View)
#. +> trunk5
#: kstars.kcfg:718
#, kde-format
msgid "Toggle whether corrections due to bending of light around the sun are taken into account"
msgstr ""
#. i18n: ectx: label, entry (UseAntialias), group (View)
#. +> trunk5
#: kstars.kcfg:722
#, kde-format
msgid "Use antialiasing when drawing the screen?"
msgstr ""
#. i18n: ectx: whatsthis, entry (UseAntialias), group (View)
#. +> trunk5
#: kstars.kcfg:723
#, kde-format
msgid "Toggle whether the sky is rendered using antialiasing. Lines and shapes are smoother with antialiasing, but rendering the screen will take more time."
msgstr ""
#. i18n: ectx: label, entry (ZoomFactor), group (View)
#. +> trunk5
#: kstars.kcfg:727
#, kde-format
msgid "Zoom Factor, in pixels per radian"
msgstr ""
#. i18n: ectx: whatsthis, entry (ZoomFactor), group (View)
#. +> trunk5
#: kstars.kcfg:728
#, kde-format
msgid "The zoom level, measured in pixels per radian."
msgstr ""
#. i18n: ectx: label, entry (ZoomScrollFactor), group (View)
#. +> trunk5
#: kstars.kcfg:734
#, kde-format
msgid "Zoom scroll sensitivity."
msgstr ""
#. i18n: ectx: whatsthis, entry (ZoomScrollFactor), group (View)
#. +> trunk5
#: kstars.kcfg:735
#, kde-format
msgid "When zooming in or out, change zoom speed factor by this multiplier."
msgstr ""
#. i18n: ectx: label, entry (MagLimitAsteroid), group (View)
#. +> trunk5
#: kstars.kcfg:741
#, kde-format
msgid "Faint limit for asteroids"
msgstr ""
#. i18n: ectx: whatsthis, entry (MagLimitAsteroid), group (View)
#. +> trunk5
#: kstars.kcfg:742
#, kde-format
msgid "The faint magnitude limit for drawing asteroids."
msgstr ""
#. i18n: ectx: label, entry (MagLimitAsteroidDownload), group (View)
#. +> trunk5
#: kstars.kcfg:746
#, kde-format
msgid "Maximum magnitude for asteroids to be downloaded from JPL."
msgstr ""
#. i18n: ectx: whatsthis, entry (MagLimitAsteroidDownload), group (View)
#. +> trunk5
#: kstars.kcfg:747
#, kde-format
msgid "The maximum magnitude (visibility) to filter the asteroid data download from JPL."
msgstr ""
#. i18n: ectx: label, entry (AsteroidLabelDensity), group (View)
#. +> trunk5
#: kstars.kcfg:751
#, kde-format
msgid "Label density for asteroid names"
msgstr ""
#. i18n: ectx: whatsthis, entry (AsteroidLabelDensity), group (View)
#. +> trunk5
#: kstars.kcfg:752
#, kde-format
msgid "Controls the relative number of asteroid name labels drawn in the map."
msgstr ""
#. i18n: ectx: label, entry (MagLimitDrawDeepSky), group (View)
#. +> trunk5
#: kstars.kcfg:756
#, kde-format
msgid "Faint limit for deep-sky objects"
msgstr ""
#. i18n: ectx: whatsthis, entry (MagLimitDrawDeepSky), group (View)
#. +> trunk5
#: kstars.kcfg:757
#, kde-format
msgid "The faint magnitude limit for drawing deep-sky objects, when fully zoomed in."
msgstr ""
#. i18n: ectx: label, entry (MagLimitDrawDeepSkyZoomOut), group (View)
#. +> trunk5
#: kstars.kcfg:761
#, kde-format
msgid "Faint limit for deep-sky objects when zoomed out"
msgstr ""
#. i18n: ectx: whatsthis, entry (MagLimitDrawDeepSkyZoomOut), group (View)
#. +> trunk5
#: kstars.kcfg:762
#, kde-format
msgid "The faint magnitude limit for drawing deep-sky objects, when fully zoomed out."
msgstr ""
#. i18n: ectx: label, entry (ShowUnknownMagObjects), group (View)
#. +> trunk5
#: kstars.kcfg:766
#, kde-format
msgid "Show deep-sky objects of unknown magnitude"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowUnknownMagObjects), group (View)
#. +> trunk5
#: kstars.kcfg:767
#, kde-format
msgid "When enabled, objects whose magnitudes are unknown, or not available to KStars, are drawn irrespective of the faint limits set."
msgstr ""
#. i18n: ectx: label, entry (MagLimitDrawStar), group (View)
#. +> trunk5
#: kstars.kcfg:772
#, kde-format
msgid "Faint limit for stars"
msgstr ""
#. i18n: ectx: whatsthis, entry (MagLimitDrawStar), group (View)
#. +> trunk5
#: kstars.kcfg:773
#, kde-format
msgid "The faint magnitude limit for drawing stars, when fully zoomed in."
msgstr ""
#. i18n: ectx: label, entry (StarDensity), group (View)
#. +> trunk5
#: kstars.kcfg:777
#, kde-format
msgid "Density of stars in the field of view"
msgstr ""
#. i18n: ectx: whatsthis, entry (StarDensity), group (View)
#. +> trunk5
#: kstars.kcfg:778
#, kde-format
msgid "Sets the density of stars in the field of view"
msgstr ""
#. i18n: ectx: label, entry (MagLimitDrawStarZoomOut), group (View)
#. +> trunk5
#: kstars.kcfg:783
#, kde-format
msgid "Faint limit for stars when zoomed out"
msgstr ""
#. i18n: ectx: whatsthis, entry (MagLimitDrawStarZoomOut), group (View)
#. +> trunk5
#: kstars.kcfg:784
#, kde-format
msgid "The faint magnitude limit for drawing stars, when fully zoomed out."
msgstr ""
#. i18n: ectx: label, entry (MagLimitHideStar), group (View)
#. +> trunk5
#: kstars.kcfg:789
#, kde-format
msgid "Faint limit for stars when slewing"
msgstr ""
#. i18n: ectx: whatsthis, entry (MagLimitHideStar), group (View)
#. +> trunk5
#: kstars.kcfg:790
#, kde-format
msgid "The faint magnitude limit for drawing stars, when the map is in motion (only applicable if faint stars are set to be hidden while the map is in motion)."
msgstr ""
#. i18n: ectx: label, entry (StarLabelDensity), group (View)
#. +> trunk5
#: kstars.kcfg:794
#, kde-format
msgid "Relative density for star name labels and/or magnitudes"
msgstr ""
#. i18n: ectx: whatsthis, entry (StarLabelDensity), group (View)
#. +> trunk5
#: kstars.kcfg:795
#, kde-format
msgid "The relative density for drawing star name and magnitude labels."
msgstr ""
#. i18n: ectx: label, entry (DeepSkyLabelDensity), group (View)
#. +> trunk5
#: kstars.kcfg:799
#, kde-format
msgid "Relative density for deep-sky object name labels and/or magnitudes"
msgstr ""
#. i18n: ectx: whatsthis, entry (DeepSkyLabelDensity), group (View)
#. +> trunk5
#: kstars.kcfg:800
#, kde-format
msgid "The relative density for drawing deep-sky object name and magnitude labels."
msgstr ""
#. i18n: ectx: label, entry (DeepSkyLongLabels), group (View)
#. +> trunk5
#: kstars.kcfg:804
#, kde-format
msgid "Show long names in deep-sky object name labels?"
msgstr ""
#. i18n: ectx: whatsthis, entry (DeepSkyLongLabels), group (View)
#. +> trunk5
#: kstars.kcfg:805
#, kde-format
msgid "If true, long names (common names) for deep-sky objects are shown in the labels."
msgstr ""
#. i18n: ectx: label, entry (MaxRadCometName), group (View)
#. +> trunk5
#: kstars.kcfg:809
#, kde-format
msgid "Maximum distance from Sun for labeling comets, in AU"
msgstr ""
#. i18n: ectx: whatsthis, entry (MaxRadCometName), group (View)
#. +> trunk5
#: kstars.kcfg:810
#, kde-format
msgid "The maximum solar distance for drawing comets."
msgstr ""
#. i18n: ectx: label, entry (UseGL), group (View)
#. +> trunk5
#: kstars.kcfg:814
#, kde-format
msgid "Switch to OpenGL backend"
msgstr ""
#. i18n: ectx: whatsthis, entry (UseGL), group (View)
#. i18n: ectx: label, entry (RunClock), group (View)
#. +> trunk5
#: kstars.kcfg:819
#, kde-format
msgid "Run clock"
msgstr ""
#. i18n: ectx: whatsthis, entry (RunClock), group (View)
#. +> trunk5
#: kstars.kcfg:820
#, kde-format
msgid "The state of the clock (running or not)"
msgstr ""
#. i18n: ectx: label, entry (ObsListSymbol), group (ObservingList)
#. +> trunk5
#: kstars.kcfg:826
#, kde-format
msgid "Use symbols to label observing list objects"
msgstr ""
#. i18n: ectx: whatsthis, entry (ObsListSymbol), group (ObservingList)
#. +> trunk5
#: kstars.kcfg:827
#, kde-format
msgid "Objects in the observing list will be highlighted with a symbol in the map."
msgstr ""
#. i18n: ectx: label, entry (ObsListText), group (ObservingList)
#. +> trunk5
#: kstars.kcfg:831
#, kde-format
msgid "Use text to label observing list objects"
msgstr ""
#. i18n: ectx: whatsthis, entry (ObsListText), group (ObservingList)
#. +> trunk5
#: kstars.kcfg:832
#, kde-format
msgid "Objects in the observing list will be highlighted with a colored name label in the map."
msgstr ""
#. i18n: ectx: label, entry (ObsListPreferDSS), group (ObservingList)
#. +> trunk5
#: kstars.kcfg:836
#, kde-format
msgid "Prefer Digitized Sky Survey imagery in the observing list"
msgstr ""
#. i18n: ectx: whatsthis, entry (ObsListPreferDSS), group (ObservingList)
#. +> trunk5
#: kstars.kcfg:837
#, kde-format
msgid "The observing list will prefer DSS imagery while downloading imagery."
msgstr ""
#. i18n: ectx: label, entry (ObsListPreferSDSS), group (ObservingList)
#. +> trunk5
#: kstars.kcfg:841
#, kde-format
msgid "Prefer Sloan Digital Sky Survey imagery in the observing list"
msgstr ""
#. i18n: ectx: whatsthis, entry (ObsListPreferSDSS), group (ObservingList)
#. +> trunk5
#: kstars.kcfg:842
#, kde-format
msgid "The observing list will prefer SDSS imagery while downloading imagery."
msgstr ""
#. i18n: ectx: label, entry (ObsListDemoteHole), group (ObservingList)
#. +> trunk5
#: kstars.kcfg:846
#, kde-format
msgid "While sorting by percentage altitude in the observing list, demote objects present in the Dobsonian hole"
msgstr ""
#. i18n: ectx: whatsthis, entry (ObsListDemoteHole), group (ObservingList)
#. +> trunk5
#: kstars.kcfg:847
#, kde-format
msgid "Check this if you use a large Dobsonian telescope. Sorting by percentage current altitude is an easy way of determining what objects are well-placed for observation. However, when using a large Dobsonian telescope, objects close to the zenith are hard to observe. Since tracking there corresponds to a rotation in azimuth, it is both counterintuitive and requires the observer to frequently move the ladder. The region around the zenith where this is particularly frustrating is called the Dobsonian hole. This checkbox makes the observing list consider objects present in the hole as unfit for observation."
msgstr ""
#. i18n: ectx: label, entry (ObsListHoleSize), group (ObservingList)
#. +> trunk5
#: kstars.kcfg:851
#, kde-format
msgid "This is the angular distance from the zenith, in degrees, below which you can easily point your telescope."
msgstr ""
#. i18n: ectx: whatsthis, entry (ObsListHoleSize), group (ObservingList)
#. +> trunk5
#: kstars.kcfg:852
#, kde-format
msgid "This specifies the angular radius of the Dobsonian hole, i.e. the region where a large Dobsonian telescope cannot be pointed easily."
msgstr ""
#. i18n: ectx: label, entry (ColorSchemeFile), group (Colors)
#. i18n: ectx: whatsthis, entry (ColorSchemeFile), group (Colors)
#. +> trunk5
#: kstars.kcfg:858 kstars.kcfg:859
#, kde-format
msgid "The name of the color scheme"
msgstr ""
#. i18n: ectx: label, entry (StarColorMode), group (Colors)
#. +> trunk5
#: kstars.kcfg:863
#, kde-format
msgid "Mode for rendering stars"
msgstr ""
#. i18n: ectx: whatsthis, entry (StarColorMode), group (Colors)
#. +> trunk5
#: kstars.kcfg:864
#, kde-format
msgid "The method for rendering stars: 0=\"realistic colors\"; 1=\"solid red\"; 2=\"solid black\"; 3=\"solid white\"; 4=\"solid real colors\""
msgstr ""
#. i18n: ectx: label, entry (StarColorIntensity), group (Colors)
#. +> trunk5
#: kstars.kcfg:869
#, kde-format
msgid "Saturation level of star colors"
msgstr ""
#. i18n: ectx: whatsthis, entry (StarColorIntensity), group (Colors)
#. +> trunk5
#: kstars.kcfg:870
#, kde-format
msgid "The color saturation level of stars (only applicable when using \"realistic colors\" mode)."
msgstr ""
#. i18n: ectx: label, entry (AngularRulerColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:875
#, kde-format
msgid "Color of angular distance ruler"
msgstr ""
#. i18n: ectx: whatsthis, entry (AngularRulerColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:876
#, kde-format
msgid "The color for the angular-distance measurement ruler."
msgstr ""
#. i18n: ectx: label, entry (BoxBGColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:880
#, kde-format
msgid "Background color of InfoBoxes"
msgstr ""
#. i18n: ectx: whatsthis, entry (BoxBGColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:881
#, kde-format
msgid "The background color of the on-screen information boxes."
msgstr ""
#. i18n: ectx: label, entry (BoxGrabColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:885
#, kde-format
msgid "Text color of InfoBoxes when grabbed with mouse"
msgstr ""
#. i18n: ectx: whatsthis, entry (BoxGrabColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:886
#, kde-format
msgid "The text color for the on-screen information boxes, when activated by a mouse click."
msgstr ""
#. i18n: ectx: label, entry (BoxTextColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:890
#, kde-format
msgid "Text color of InfoBoxes"
msgstr ""
#. i18n: ectx: whatsthis, entry (BoxTextColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:891
#, kde-format
msgid "The normal text color of the on-screen information boxes."
msgstr ""
#. i18n: ectx: label, entry (CBoundColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:895
#, kde-format
msgid "Color of constellation boundaries"
msgstr ""
#. i18n: ectx: whatsthis, entry (CBoundColor), group (Colors)
#. i18n: ectx: whatsthis, entry (CBoundHighColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:896 kstars.kcfg:901
#, kde-format
msgid "The color for the constellation boundary lines."
msgstr ""
#. i18n: ectx: label, entry (CBoundHighColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:900
#, kde-format
msgid "Color of highlighted constellation boundary"
msgstr ""
#. i18n: ectx: label, entry (CLineColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:905
#, kde-format
msgid "Color of constellation lines"
msgstr ""
#. i18n: ectx: whatsthis, entry (CLineColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:906
#, kde-format
msgid "The color for the constellation figure lines."
msgstr ""
#. i18n: ectx: label, entry (CNameColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:910
#, kde-format
msgid "Color of constellation names"
msgstr ""
#. i18n: ectx: whatsthis, entry (CNameColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:911
#, kde-format
msgid "The color for the constellation names."
msgstr ""
#. i18n: ectx: label, entry (CompassColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:915
#, kde-format
msgid "Color of cardinal compass labels along horizon"
msgstr ""
#. i18n: ectx: whatsthis, entry (CompassColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:916
#, kde-format
msgid "The color for the cardinal compass point labels."
msgstr ""
#. i18n: ectx: label, entry (EclipticColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:920
#, kde-format
msgid "Color of ecliptic line"
msgstr ""
#. i18n: ectx: whatsthis, entry (EclipticColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:921
#, kde-format
msgid "The color for the ecliptic line."
msgstr ""
#. i18n: ectx: label, entry (EquatorColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:925
#, kde-format
msgid "Color of equator line"
msgstr ""
#. i18n: ectx: whatsthis, entry (EquatorColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:926
#, kde-format
msgid "The color for the equator line."
msgstr ""
#. i18n: ectx: label, entry (EquatorialGridColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:930
#, kde-format
msgid "Color of equatorial coordinate grid lines"
msgstr ""
#. i18n: ectx: whatsthis, entry (EquatorialGridColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:931
#, kde-format
msgid "The color for the equatorial coordinate grid lines."
msgstr ""
#. i18n: ectx: label, entry (HorizontalGridColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:935
#, kde-format
msgid "Color of horizontal coordinate grid lines"
msgstr ""
#. i18n: ectx: whatsthis, entry (HorizontalGridColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:936
#, kde-format
msgid "The color for the horizontal coordinate grid lines."
msgstr ""
#. i18n: ectx: label, entry (SpecialObjectColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:940
#, kde-format
msgid "Color of objects with extra links available"
msgstr ""
#. i18n: ectx: whatsthis, entry (SpecialObjectColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:941
#, kde-format
msgid "The color for objects which have extra URL links available."
msgstr ""
#. i18n: ectx: label, entry (HorizonColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:945
#, kde-format
msgid "Color of horizon line"
msgstr ""
#. i18n: ectx: whatsthis, entry (HorizonColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:946
#, kde-format
msgid "The color for the horizon line and opaque ground."
msgstr ""
#. i18n: ectx: label, entry (LocalMeridianColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:950
#, kde-format
msgid "Color of local meridian line"
msgstr ""
#. i18n: ectx: whatsthis, entry (LocalMeridianColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:951
#, kde-format
msgid "The color for the local meridian line."
msgstr ""
#. i18n: ectx: label, entry (MessierColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:955
#, kde-format
msgid "Color of Messier objects"
msgstr ""
#. i18n: ectx: whatsthis, entry (MessierColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:956
#, kde-format
msgid "The color for Messier object symbols."
msgstr ""
#. i18n: ectx: label, entry (NGCColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:960
#, kde-format
msgid "Color of NGC objects"
msgstr ""
#. i18n: ectx: whatsthis, entry (NGCColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:961
#, kde-format
msgid "The color for NGC object symbols."
msgstr ""
#. i18n: ectx: label, entry (ICColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:965
#, kde-format
msgid "Color of IC objects"
msgstr ""
#. i18n: ectx: whatsthis, entry (ICColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:966
#, kde-format
msgid "The color for IC object symbols."
msgstr ""
#. i18n: ectx: label, entry (MilkyWayWColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:970
#, kde-format
msgid "Color of Milky Way contour"
msgstr ""
#. i18n: ectx: whatsthis, entry (MilkyWayWColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:971
#, kde-format
msgid "The color for the Milky Way contour."
msgstr ""
#. i18n: ectx: label, entry (StarNameColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:975
#, kde-format
msgid "Color of star name labels"
msgstr ""
#. i18n: ectx: whatsthis, entry (StarNameColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:976
#, kde-format
msgid "The color for star name labels."
msgstr ""
#. i18n: ectx: label, entry (DeepSkyNameColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:980
#, kde-format
msgid "Color of deep-sky object name labels"
msgstr ""
#. i18n: ectx: whatsthis, entry (DeepSkyNameColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:981
#, kde-format
msgid "The color for deep-sky object name labels."
msgstr ""
#. i18n: ectx: label, entry (PlanetNameColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:985
#, kde-format
msgid "Color of planet name labels"
msgstr ""
#. i18n: ectx: whatsthis, entry (PlanetNameColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:986
#, kde-format
msgid "The color for solar system object labels."
msgstr ""
#. i18n: ectx: label, entry (PlanetTrailColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:990
#, kde-format
msgid "Color of planet trails"
msgstr ""
#. i18n: ectx: whatsthis, entry (PlanetTrailColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:991
#, kde-format
msgid "The color for solar system object trails."
msgstr ""
#. i18n: ectx: label, entry (SkyColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:995
#, kde-format
msgid "Color of sky"
msgstr ""
#. i18n: ectx: whatsthis, entry (SkyColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:996
#, kde-format
msgid "The color for the sky background."
msgstr ""
#. i18n: ectx: label, entry (ArtificialHorizonColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1000
#, kde-format
msgid "Color Artificial Horizon"
msgstr ""
#. i18n: ectx: whatsthis, entry (ArtificialHorizonColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1001
#, kde-format
msgid "The color for the artificial horizon region."
msgstr ""
#. i18n: ectx: label, entry (TelescopeTargetColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1005
#, kde-format
msgid "Color of telescope symbols"
msgstr ""
#. i18n: ectx: whatsthis, entry (TelescopeTargetColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1006
#, kde-format
msgid "The color for telescope target symbols."
msgstr ""
#. i18n: ectx: label, entry (VisibleSatColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1010
#, kde-format
msgid "Color of visible satellites"
msgstr ""
#. i18n: ectx: whatsthis, entry (VisibleSatColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1011
#, kde-format
msgid "Color of visible satellites."
msgstr ""
#. i18n: ectx: label, entry (SatColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1015
#, kde-format
msgid "Color of invisible satellites"
msgstr ""
#. i18n: ectx: whatsthis, entry (SatColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1016
#, kde-format
msgid "Color of invisible satellites."
msgstr ""
#. i18n: ectx: label, entry (SatLabelColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1020
#, kde-format
msgid "Color of satellites labels"
msgstr ""
#. i18n: ectx: whatsthis, entry (SatLabelColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1021
#, kde-format
msgid "Color of satellites labels."
msgstr ""
#. i18n: ectx: label, entry (SupernovaColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1025
#, kde-format
msgid "Color of supernovae"
msgstr ""
#. i18n: ectx: whatsthis, entry (SupernovaColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1026
#, kde-format
msgid "Color of supernova"
msgstr ""
#. i18n: ectx: label, entry (UserLabelColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1030
#, kde-format
msgid "Color of user-added labels"
msgstr ""
#. i18n: ectx: whatsthis, entry (UserLabelColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1031
#, kde-format
msgid "The color for user-added object labels."
msgstr ""
#. i18n: ectx: label, entry (RAGuideColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1035
#, kde-format
msgid "Color of RA Guide Error"
msgstr ""
#. i18n: ectx: whatsthis, entry (RAGuideColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1036
#, kde-format
msgid "The color for RA Guide Error bar in Ekos guide module."
msgstr ""
#. i18n: ectx: label, entry (DEGuideColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1040
#, kde-format
msgid "Color of DEC Guide Error"
msgstr ""
#. i18n: ectx: whatsthis, entry (DEGuideColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1041
#, kde-format
msgid "The color for DEC Guide Error bar in Ekos guide module."
msgstr ""
#. i18n: ectx: label, entry (SolverFOVColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1045
#, kde-format
msgid "Color of solver FOV box"
msgstr ""
#. i18n: ectx: whatsthis, entry (SolverFOVColor), group (Colors)
#. +> trunk5
#: kstars.kcfg:1046
#, kde-format
msgid "The color for solver FOV box in Ekos alignment module."
msgstr ""
#. i18n: ectx: label, entry (xplanetIsInternal), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1052 xplanet/opsxplanet.cpp:29
#, kde-format
msgid "Internal or External XPlanet?"
msgstr ""
#. i18n: ectx: label, entry (XplanetPath), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1056
#, kde-format
msgid "Path to xplanet binary"
msgstr ""
#. i18n: ectx: whatsthis, entry (XplanetPath), group (Xplanet)
#. i18n: ectx: whatsthis, entry (XplanetLabel), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1077
#, kde-format
msgid "If true, display a label in the upper right corner."
msgstr ""
#. i18n: ectx: label, entry (XplanetLabelLocalTime), group (Xplanet)
#. i18n: ectx: label, entry (XplanetLabelGMT), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1081 kstars.kcfg:1086
#, kde-format
msgid "Show GMT label"
msgstr ""
#. i18n: ectx: whatsthis, entry (XplanetLabelLocalTime), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1082
#, kde-format
msgid "Show local time."
msgstr ""
#. i18n: ectx: whatsthis, entry (XplanetLabelGMT), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1087
#, kde-format
msgid "Show GMT instead of local time."
msgstr ""
#. i18n: ectx: label, entry (XplanetLabelString), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1091
#, kde-format
msgid "Planet string"
msgstr ""
#. i18n: ectx: whatsthis, entry (XplanetLabelString), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1092
#, kde-format, no-c-format
msgid "Specify the text of the first line of the label. By default, it says something like \"Looking at Earth\". Any instances of %t will be replaced by the target name, and any instances of %o will be replaced by the origin name."
msgstr ""
#. i18n: ectx: label, entry (XplanetFontSize), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1096
#, kde-format
msgid "Font Size"
msgstr ""
#. i18n: ectx: whatsthis, entry (XplanetFontSize), group (Xplanet)
#. i18n: ectx: label, entry (XplanetDateFormat), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1106
#, kde-format
msgid "Date format"
msgstr ""
#. i18n: ectx: whatsthis, entry (XplanetDateFormat), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1107
#, kde-format, no-c-format
msgid "Specify the format for the date/time label. This format string is passed to strftime(3). The default is \"%c %Z\", which shows the date, time, and time zone in the locale’s appropriate date and time representation."
msgstr ""
#. i18n: ectx: label, entry (XplanetLabelTL), group (Xplanet)
#. i18n: ectx: whatsthis, entry (XplanetLongitude), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1148
#, kde-format
msgid "Place the observer above the specified longitude (in degrees). Longitude is positive going east, negative going west (for the earth and moon), so for example Los Angeles is at -118 or 242. The default value is 0."
msgstr ""
#. i18n: ectx: label, entry (XplanetProjection), group (Xplanet)
#. i18n: ectx: whatsthis, entry (XplanetBackground), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1168
#, kde-format
msgid "Use a file as the background image, with the planet to be superimposed upon it. This option is only meaningful with the -projection option. A color may also be supplied."
msgstr ""
#. i18n: ectx: label, entry (XplanetBackgroundImage), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1172
#, kde-format
msgid "Use background image"
msgstr ""
#. i18n: ectx: whatsthis, entry (XplanetBackgroundImage), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1173
#, kde-format
msgid "Use a file as the background image."
msgstr ""
#. i18n: ectx: label, entry (XplanetBackgroundImagePath), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1177
#, kde-format
msgid "Background image path"
msgstr ""
#. i18n: ectx: whatsthis, entry (XplanetBackgroundImagePath), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1178
#, kde-format
msgid "The path of the background image."
msgstr ""
#. i18n: ectx: label, entry (XplanetBackgroundColor), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1182
#, kde-format
msgid "Use background color"
msgstr ""
#. i18n: ectx: whatsthis, entry (XplanetBackgroundColor), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1183
#, kde-format
msgid "Use a color as the background."
msgstr ""
#. i18n: ectx: label, entry (XplanetBackgroundColorValue), group (Xplanet)
msgid "A star of the specified magnitude will have a pixel brightness of 1. The default value is 10. Stars will be drawn more brightly if this number is larger."
msgstr ""
#. i18n: ectx: label, entry (XplanetArcFile), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1197
#, kde-format
msgid "Arc file"
msgstr ""
#. i18n: ectx: whatsthis, entry (XplanetArcFile), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1198
#, kde-format
msgid "If checked, use an arc file to be plotted against the background stars."
msgstr ""
#. i18n: ectx: label, entry (XplanetArcFilePath), group (Xplanet)
#. +> trunk5
#: kstars.kcfg:1202
#, kde-format
msgid "Path to arc file"
msgstr ""
#. i18n: ectx: whatsthis, entry (XplanetArcFilePath), group (Xplanet)
#. i18n: ectx: whatsthis, entry (AlwaysRecomputeCoordinates), group (General)
#. +> trunk5
#: kstars.kcfg:1286
#, kde-format
msgid "Checking this option causes recomputation of current equatorial coordinates from catalog coordinates (i.e. application of precession, nutation and aberration corrections) for every redraw of the map. This makes processing slower when there are many stars to handle, but is more likely to be bug free. There are known bugs in the rendering of stars when this recomputation is avoided."
msgstr ""
#. i18n: ectx: label, entry (DefaultDSSImageSize), group (General)
#. +> trunk5
#: kstars.kcfg:1290
#, kde-format
msgid "Default size for DSS images"
msgstr ""
#. i18n: ectx: whatsthis, entry (DefaultDSSImageSize), group (General)
#. +> trunk5
#: kstars.kcfg:1291
#, kde-format
msgid "The default size for DSS images downloaded from the internet."
msgstr ""
#. i18n: ectx: label, entry (DSSPadding), group (General)
#. +> trunk5
#: kstars.kcfg:1295
#, kde-format
msgid "Additional padding around DSS Images of deep-sky objects"
msgstr ""
#. i18n: ectx: whatsthis, entry (DSSPadding), group (General)
#. +> trunk5
#: kstars.kcfg:1296
#, kde-format
msgid "To include parts of the star field, we add some extra padding around DSS images of deep-sky objects. This option configures the total (both sides) padding added to either dimension of the field."
msgstr ""
#. i18n: ectx: label, entry (VerboseLogging), group (General)
#. +> trunk5
#: kstars.kcfg:1300
#, kde-format
msgid "Enable Verbose Logging"
msgstr ""
#. i18n: ectx: whatsthis, entry (VerboseLogging), group (General)
#. +> trunk5
#: kstars.kcfg:1301
#, kde-format
msgid "Checking this option causes KStars to generate verbose debug information for diagnostic purposes. This may cause slowdown of KStars."
msgstr ""
#. i18n: ectx: label, entry (RegularLogging), group (General)
#. +> trunk5
#: kstars.kcfg:1305
#, kde-format
msgid "Enable Regular Logging"
msgstr ""
#. i18n: ectx: whatsthis, entry (RegularLogging), group (General)
#. +> trunk5
#: kstars.kcfg:1306
#, kde-format
msgid "Checking this option causes KStars to generate regular debug information."
msgstr ""
#. i18n: ectx: label, entry (DisableLogging), group (General)
#. +> trunk5
#: kstars.kcfg:1310
#, kde-format
msgid "Disable Verbose Logging"
msgstr ""
#. i18n: ectx: whatsthis, entry (DisableLogging), group (General)
#. +> trunk5
#: kstars.kcfg:1311
#, kde-format
msgid "Checking this option causes KStars to stop generating ANY debug information."
msgstr ""
#. i18n: ectx: label, entry (LogToDefault), group (General)
#. +> trunk5
#: kstars.kcfg:1315
#, kde-format
msgid "Log debug message to default output"
msgstr ""
#. i18n: ectx: whatsthis, entry (LogToDefault), group (General)
#. +> trunk5
#: kstars.kcfg:1316
#, kde-format
msgid "Checking this option causes KStars log debug messages to the default output used by the platform (e.g. Standard Error)."
msgstr ""
#. i18n: ectx: label, entry (LogToFile), group (General)
#. +> trunk5
#: kstars.kcfg:1320
#, kde-format
msgid "Log debug message to a log file"
msgstr ""
#. i18n: ectx: whatsthis, entry (LogToFile), group (General)
#. +> trunk5
#: kstars.kcfg:1321
#, kde-format
msgid "Checking this option causes KStars log debug messages to a log file as specified."
msgstr ""
#. i18n: ectx: whatsthis, entry (FITSLogging), group (General)
#. +> trunk5
#: kstars.kcfg:1325
#, kde-format
msgid "Log FITS Data activity."
msgstr ""
#. i18n: ectx: whatsthis, entry (INDILogging), group (General)
#. +> trunk5
#: kstars.kcfg:1329
#, kde-format
msgid "Log INDI devices activity."
msgstr ""
#. i18n: ectx: whatsthis, entry (CaptureLogging), group (General)
#. +> trunk5
#: kstars.kcfg:1333
#, kde-format
msgid "Log Ekos Capture Module activity."
msgstr ""
#. i18n: ectx: whatsthis, entry (FocusLogging), group (General)
#. +> trunk5
#: kstars.kcfg:1337
#, kde-format
msgid "Log Ekos Focus Module activity."
msgstr ""
#. i18n: ectx: whatsthis, entry (GuideLogging), group (General)
#. +> trunk5
#: kstars.kcfg:1341
#, kde-format
msgid "Log Ekos Guide Module activity."
msgstr ""
#. i18n: ectx: whatsthis, entry (AlignmentLogging), group (General)
#. +> trunk5
#: kstars.kcfg:1345
#, kde-format
msgid "Log Ekos Alignment Module activity."
msgstr ""
#. i18n: ectx: whatsthis, entry (MountLogging), group (General)
#. +> trunk5
#: kstars.kcfg:1349
#, kde-format
msgid "Log Ekos Mount Module activity."
msgstr ""
#. i18n: ectx: label, entry (useFITSViewer), group (FITSViewer)
#. +> trunk5
#: kstars.kcfg:1355
#, kde-format
msgid "Display every image captured in a FITS Viewer window."
msgstr ""
#. i18n: ectx: label, entry (singlePreviewFITS), group (FITSViewer)
#. +> trunk5
#: kstars.kcfg:1359
#, kde-format
msgid "Preview FITS in a single tab?"
msgstr ""
#. i18n: ectx: label, entry (singleWindowCapturedFITS), group (FITSViewer)
#. +> trunk5
#: kstars.kcfg:1364
#, kde-format
msgid "Display all captured FITS in one window?"
msgstr ""
#. i18n: ectx: whatsthis, entry (singleWindowCapturedFITS), group (FITSViewer)
#. +> trunk5
#: kstars.kcfg:1365
#, kde-format
msgid "Display all captured FITS images in a single FITS Viewer window. By default each camera create its own FITS Viewer instance"
msgstr ""
#. i18n: ectx: label, entry (singleWindowOpenedFITS), group (FITSViewer)
#. +> trunk5
#: kstars.kcfg:1369
#, kde-format
msgid "Display all opened FITS in one window?"
msgstr ""
#. i18n: ectx: whatsthis, entry (singleWindowOpenedFITS), group (FITSViewer)
#. +> trunk5
#: kstars.kcfg:1370
#, kde-format
msgid "Display all opened FITS images in a single FITS Viewer window."
msgstr ""
#. i18n: ectx: label, entry (independentWindowFITS), group (FITSViewer)
#. +> trunk5
#: kstars.kcfg:1374
#, kde-format
msgid "Make FITS Viewer window independent of KStars main window"
msgstr ""
#. i18n: ectx: label, entry (AutoDebayer), group (FITSViewer)
#. +> trunk5
#: kstars.kcfg:1378
#, kde-format
msgid "Automatically debayer a FITS image if it is contains a bayer pattern"
msgstr ""
#. i18n: ectx: label, entry (Auto3DCube), group (FITSViewer)
#. +> trunk5
#: kstars.kcfg:1382
#, kde-format
msgid "Process 3D FITS Cube (RGB). If false, only first channel is processed."
msgstr ""
#. i18n: ectx: label, entry (AutoWCS), group (FITSViewer)
#. +> trunk5
#: kstars.kcfg:1386
#, kde-format
msgid "Automatically process World-Coordinate-System (WCS) data when loading a FITS file."
msgstr ""
#. i18n: ectx: label, entry (LimitedResourcesMode), group (FITSViewer)
#. +> trunk5
#: kstars.kcfg:1390
#, kde-format
msgid "Conserve CPU and memory by disabling all resource-intensive features in FITS Viewer"
msgstr ""
#. i18n: ectx: label, entry (BortleClass), group (WISettings)
#. +> trunk5
#: kstars.kcfg:1396
#, kde-format
msgid "Bortle dark-sky rating"
msgstr ""
#. i18n: ectx: label, entry (TelescopeCheck), group (WISettings)
#. +> trunk5
#: kstars.kcfg:1400
#, kde-format
msgid "Availability of telescope"
msgstr ""
#. i18n: ectx: label, entry (BinocularsCheck), group (WISettings)
#. +> trunk5
#: kstars.kcfg:1404
#, kde-format
msgid "Availability of binoculars"
msgstr ""
#. i18n: ectx: label, entry (BinocularsAperture), group (WISettings)
#. +> trunk5
#: kstars.kcfg:1408
#, kde-format
msgid "Aperture of available binocular"
msgstr ""
#. i18n: ectx: label, entry (ScopeListIndex), group (WISettings)
#. +> trunk5
#: kstars.kcfg:1412
#, kde-format
msgid "Index of selected scope from list of scopes"
msgstr ""
#. i18n: ectx: label, entry (EkosWindowWidth), group (Ekos)
#. +> trunk5
#: kstars.kcfg:1418
#, kde-format
msgid "Ekos window width"
msgstr ""
#. i18n: ectx: label, entry (EkosWindowHeight), group (Ekos)
#. +> trunk5
#: kstars.kcfg:1422
#, kde-format
msgid "Ekos window height"
msgstr ""
#. i18n: ectx: label, entry (EkosLeftIcons), group (Ekos)
#. +> trunk5
#: kstars.kcfg:1430
#, kde-format
msgid "Ekos modules icons are placed to the left of pages"
msgstr ""
#. i18n: ectx: label, entry (independentWindowEkos), group (Ekos)
#. +> trunk5
#: kstars.kcfg:1434
#, kde-format
msgid "Make Ekos window independent of KStars main window"
msgstr ""
#. i18n: ectx: label, entry (profile), group (Ekos)
#. +> trunk5
#: kstars.kcfg:1438
#, kde-format
msgid "Ekos drivers profile"
msgstr ""
#. i18n: ectx: label, entry (neverLoadConfig), group (Ekos)
#. +> trunk5
#: kstars.kcfg:1442
#, kde-format
msgid "Never load device configuration?"
msgstr ""
#. i18n: ectx: label, entry (loadConfigOnConnection), group (Ekos)
#. +> trunk5
#: kstars.kcfg:1446
#, kde-format
msgid "Load device configuration upon successful connection?"
msgstr ""
#. i18n: ectx: label, entry (loadDefaultConfig), group (Ekos)
#. +> trunk5
#: kstars.kcfg:1450
#, kde-format
msgid "Always load device default configuration upon successful connection?"
msgstr ""
#. i18n: ectx: label, entry (shutterfulCCDs), group (DarkLibrary)
#. +> trunk5
#: kstars.kcfg:1460
#, kde-format
msgid "List of CCDs with mechanical or electronic shutters."
msgstr ""
#. i18n: ectx: label, entry (shutterlessCCDs), group (DarkLibrary)
#. +> trunk5
#: kstars.kcfg:1463
#, kde-format
msgid "List of CCDs without mechanical or electronic shutters."
msgstr ""
#. i18n: ectx: label, entry (MinimumAltLimit), group (Mount)
#. +> trunk5
#: kstars.kcfg:1468
#, kde-format
msgid "Default minimum mount altitude limit"
msgstr ""
#. i18n: ectx: label, entry (MaximumAltLimit), group (Mount)
#. +> trunk5
#: kstars.kcfg:1473
#, kde-format
msgid "Default maximum mount altitude limit."
msgstr ""
#. i18n: ectx: whatsthis, entry (MaximumAltLimit), group (Mount)
#. +> trunk5
#: kstars.kcfg:1474
#, kde-format
msgid "Maximum telescope altitude limit. If the telescope is above this limit, it will be commanded to stop."
msgstr ""
#. i18n: ectx: label, entry (EnableAltitudeLimits), group (Mount)
#. +> trunk5
#: kstars.kcfg:1478
#, kde-format
msgid "Enable mount altitude limits."
msgstr ""
#. i18n: ectx: label, entry (DefaultCaptureCCD), group (Capture)
#. +> trunk5
#: kstars.kcfg:1484
#, kde-format
msgid "Default capture module CCD."
msgstr ""
#. i18n: ectx: label, entry (DefaultObserver), group (Capture)
#. +> trunk5
#: kstars.kcfg:1487
#, kde-format
msgid "Default observer full name."
msgstr ""
#. i18n: ectx: label, entry (SyncFOVPA), group (Capture)
#. +> trunk5
#: kstars.kcfg:1490
#, kde-format
msgid "Sync FOV indicator Position Angle with Rotator Settings Position Angle"
msgstr ""
#. i18n: ectx: label, entry (PAMultiplier), group (Capture)
#. +> trunk5
#: kstars.kcfg:1494
#, kde-format
msgid "Position angle multiplier"
msgstr ""
#. i18n: ectx: label, entry (PAOffset), group (Capture)
#. +> trunk5
#: kstars.kcfg:1498
#, kde-format
msgid "Position angle offset"
msgstr ""
#. i18n: ectx: label, entry (GuideDeviation), group (Capture)
#. +> trunk5
#: kstars.kcfg:1502
#, kde-format
msgid "Default maximum permittable guide deviation"
msgstr ""
#. i18n: ectx: whatsthis, entry (GuideDeviation), group (Capture)
#. +> trunk5
#: kstars.kcfg:1503
#, kde-format
msgid "If guide deviation exceeds this limit, the exposure will be automatically aborted and only resumed when the deviation is within this limit."
msgstr ""
#. i18n: ectx: label, entry (HFRDeviation), group (Capture)
#. +> trunk5
#: kstars.kcfg:1507
#, kde-format
msgid "Default maximum permittable HFR deviation"
msgstr ""
#. i18n: ectx: whatsthis, entry (HFRDeviation), group (Capture)
#. +> trunk5
#: kstars.kcfg:1508
#, kde-format
msgid "If HFR deviation exceeds this limit, the autofocus routine will be automatically started."
msgstr ""
#. i18n: ectx: label, entry (EnforceGuideDeviation), group (Capture)
#. +> trunk5
#: kstars.kcfg:1512
#, kde-format
msgid "Enforce guiding deviation limit."
msgstr ""
#. i18n: ectx: label, entry (EnforceAutofocus), group (Capture)
#. +> trunk5
#: kstars.kcfg:1516
#, kde-format
msgid "Enforce Autofocus HFR limit."
msgstr ""
#. i18n: ectx: label, entry (EnforceRefocusEveryN), group (Capture)
#. +> trunk5
#: kstars.kcfg:1520
#, kde-format
msgid "Enforce Refocus Every N Minutes."
msgstr ""
#. i18n: ectx: label, entry (RefocusEveryN), group (Capture)
#. +> trunk5
#: kstars.kcfg:1524
#, kde-format
msgid "Number of minute between forced refocus attempts"
msgstr ""
#. i18n: ectx: whatsthis, entry (RefocusEveryN), group (Capture)
#. +> trunk5
#: kstars.kcfg:1525
#, kde-format
msgid "Sets the time interval before forced autofocus attempts during a capture sequence."
msgstr ""
#. i18n: ectx: label, entry (AutoMeridianHours), group (Capture)
#. +> trunk5
#: kstars.kcfg:1529
#, kde-format
msgid "Default hour angle to perform meridian flip"
msgstr ""
#. i18n: ectx: whatsthis, entry (AutoMeridianHours), group (Capture)
#. +> trunk5
#: kstars.kcfg:1530
#, kde-format
msgid "If the target hour angle exceeds this value, Ekos will command a meridian flip and if successful it will resume guiding and capture operations."
msgstr ""
#. i18n: ectx: label, entry (AutoMeridianFlip), group (Capture)
#. +> trunk5
#: kstars.kcfg:1533
#, kde-format
msgid "Flips the mount when reaching the meridian, if supported."
msgstr ""
#. i18n: ectx: label, entry (ResetMountModelAfterMeridian), group (Capture)
#. +> trunk5
#: kstars.kcfg:1537
#, kde-format
msgid "Reset mount model after meridian flip."
msgstr ""
#. i18n: ectx: label, entry (CalibrationADUValue), group (Capture)
#. +> trunk5
#: kstars.kcfg:1541
#, kde-format
msgid "Desired flat field ADU"
msgstr ""
#. i18n: ectx: whatsthis, entry (CalibrationADUValue), group (Capture)
#. +> trunk5
#: kstars.kcfg:1542
#, kde-format
msgid "If set, Ekos will capture a few flat images to determine the optimal exposure time to achieve the desired ADU value."
msgstr ""
#. i18n: ectx: label, entry (CalibrationADUValueTolerance), group (Capture)
#. +> trunk5
#: kstars.kcfg:1546
#, kde-format
msgid "ADU Value tolerance"
msgstr ""
#. i18n: ectx: whatsthis, entry (CalibrationADUValueTolerance), group (Capture)
#. +> trunk5
#: kstars.kcfg:1547
#, kde-format
msgid "Maximum difference between measured and target ADU values to deem the value as acceptable."
msgstr ""
#. i18n: ectx: label, entry (CalibrationFlatSourceIndex), group (Capture)
#. +> trunk5
#: kstars.kcfg:1551
#, kde-format
msgid "Index of flat source option."
msgstr ""
#. i18n: ectx: label, entry (CalibrationFlatDurationIndex), group (Capture)
#. +> trunk5
#: kstars.kcfg:1555
#, kde-format
msgid "Index of flat duration option."
msgstr ""
#. i18n: ectx: label, entry (CalibrationWallAz), group (Capture)
#. +> trunk5
#: kstars.kcfg:1559
#, kde-format
msgid "Azimuth of calibration wall location."
msgstr ""
#. i18n: ectx: label, entry (CalibrationWallAlt), group (Capture)
#. +> trunk5
#: kstars.kcfg:1563
#, kde-format
msgid "Altitude of calibration wall location."
msgstr ""
#. i18n: ectx: label, entry (MaxTemperatureDiff), group (Capture)
#. +> trunk5
#: kstars.kcfg:1567
#, kde-format
msgid "Maximum acceptable difference between requested and measured temperature set point."
msgstr ""
#. i18n: ectx: label, entry (RememberJobProgress), group (Capture)
#. +> trunk5
#: kstars.kcfg:1571
#, kde-format
msgid "When starting a new capture job, check if files were previously captured and resume capture afterwards."
msgstr ""
#. i18n: ectx: label, entry (HFRThresholdPercentage), group (Capture)
#. +> trunk5
#: kstars.kcfg:1575
#, kde-format
msgid "Increase autofocus HFR value by this percentage gain and store it in Capture Module."
msgstr ""
#. i18n: ectx: label, entry (SaveHFRToFile), group (Capture)
#. +> trunk5
#: kstars.kcfg:1579
#, kde-format
msgid "When saving a sequence file, save current HFR threshold value. By default, zero value is used."
msgstr ""
#. i18n: ectx: label, entry (AutoStretch), group (Capture)
#. +> trunk5
#: kstars.kcfg:1591
#, kde-format
msgid "Perform auto stretch on captured images in FITS Viewer."
msgstr ""
#. i18n: ectx: label, entry (useSummaryPreview), group (Capture)
#. +> trunk5
#: kstars.kcfg:1595
#, kde-format
msgid "Display every image captured sequence image in the Ekos summary screen preview window."
msgstr ""
#. i18n: ectx: label, entry (DefaultFocusCCD), group (Focus)
#. +> trunk5
#: kstars.kcfg:1601
#, kde-format
msgid "Default focus module CCD."
msgstr ""
#. i18n: ectx: label, entry (DefaultFocusFocuser), group (Focus)
#. +> trunk5
#: kstars.kcfg:1604
#, kde-format
msgid "Default focus module focuser."
msgstr ""
#. i18n: ectx: label, entry (FocusTicks), group (Focus)
#. +> trunk5
#: kstars.kcfg:1607
#, kde-format
msgid "Default Focuser step ticks"
msgstr ""
#. i18n: ectx: whatsthis, entry (FocusTicks), group (Focus)
#. +> trunk5
#: kstars.kcfg:1608
#, kde-format
msgid "Step size of the absolute focuser. The step size TICKS should be adjusted so that when the focuser moves TICKS steps, the difference in HFR is more than 0.1 pixels. Lower the value when you are close to optimal focus."
msgstr ""
#. i18n: ectx: label, entry (FocusTolerance), group (Focus)
#. +> trunk5
#: kstars.kcfg:1616
#, kde-format
msgid "Default Focuser tolerance value"
msgstr ""
#. i18n: ectx: whatsthis, entry (FocusTolerance), group (Focus)
#. +> trunk5
#: kstars.kcfg:1617
#, kde-format
msgid "The tolerance specifies the percentage difference between the current focusing position and the minimum obtained during the focusing run. Adjustment of this value is necessary to prevent the focusing algorithm from oscillating back and forth."
msgstr ""
#. i18n: ectx: label, entry (FocusMaxTravel), group (Focus)
#. +> trunk5
#: kstars.kcfg:1621
#, kde-format
msgid "Maximum Focus Travel Distance"
msgstr ""
#. i18n: ectx: whatsthis, entry (FocusMaxTravel), group (Focus)
#. +> trunk5
#: kstars.kcfg:1622
#, kde-format
msgid "Set the maximum travel distance of an absolute focuser."
msgstr ""
#. i18n: ectx: label, entry (FocusExposure), group (Focus)
#. +> trunk5
#: kstars.kcfg:1626
#, kde-format
msgid "Default Focuser exposure value"
msgstr ""
#. i18n: ectx: whatsthis, entry (FocusExposure), group (Focus)
#. +> trunk5
#: kstars.kcfg:1627
#, kde-format
msgid "Specifies exposure value of CCD when performing focusing. Lower this value to avoid saturation of bright stars which adversely affects HFR measurement. Increase the value if no stars are detected."
msgstr ""
#. i18n: ectx: label, entry (FocusBoxSize), group (Focus)
#. +> trunk5
#: kstars.kcfg:1631
#, kde-format
msgid "Default Focuser star selection box size"
msgstr ""
#. i18n: ectx: whatsthis, entry (FocusBoxSize), group (Focus)
#. +> trunk5
#: kstars.kcfg:1632
#, kde-format
msgid "Set box size to select a focus star."
msgstr ""
#. i18n: ectx: label, entry (FocusXBin), group (Focus)
#. +> trunk5
#: kstars.kcfg:1636
#, kde-format
msgid "Default CCD X binning in focus mode"
msgstr ""
#. i18n: ectx: whatsthis, entry (FocusXBin), group (Focus)
#. +> trunk5
#: kstars.kcfg:1637
#, kde-format
msgid "Set horizontal binning of CCD camera while in focus mode."
msgstr ""
#. i18n: ectx: label, entry (FocusYBin), group (Focus)
#. +> trunk5
#: kstars.kcfg:1641
#, kde-format
msgid "Default CCD Y binning in focus mode"
msgstr ""
#. i18n: ectx: whatsthis, entry (FocusYBin), group (Focus)
#. +> trunk5
#: kstars.kcfg:1642
#, kde-format
msgid "Set vertical binning of CCD camera while in focus mode."
msgstr ""
#. i18n: ectx: label, entry (FocusSubFrame), group (Focus)
#. +> trunk5
#: kstars.kcfg:1646
#, kde-format
msgid "Subframe the focus star during the autofocus procedure."
msgstr ""
#. i18n: ectx: label, entry (FocusUseFullField), group (Focus)
#. +> trunk5
#: kstars.kcfg:1650
#, kde-format
msgid "Use full frame field to measure HFR."
msgstr ""
#. i18n: ectx: label, entry (FocusAutoStarEnabled), group (Focus)
#. +> trunk5
#: kstars.kcfg:1654
#, kde-format
msgid "Automatically select a star to focus."
msgstr ""
#. i18n: ectx: label, entry (SuspendGuiding), group (Focus)
#. +> trunk5
#: kstars.kcfg:1658
#, kde-format
msgid "Suspend guiding while autofocus in progress."
msgstr ""
#. i18n: ectx: label, entry (UseFocusDarkFrame), group (Focus)
#. +> trunk5
#: kstars.kcfg:1662
#, kde-format
msgid "Take a dark frame and subtract it before running autofocus operation."
msgstr ""
#. i18n: ectx: label, entry (FocusEffect), group (Focus)
#. +> trunk5
#: kstars.kcfg:1666
#, kde-format
msgid "Image filter to be applied to focus image upon loading."
msgstr ""
#. i18n: ectx: label, entry (FocusThreshold), group (Focus)
#. +> trunk5
#: kstars.kcfg:1670
#, kde-format
msgid "Relative percentage strength of centroid edge pixel strength to average pixel value."
msgstr ""
#. i18n: ectx: label, entry (FocusDetection), group (Focus)
#. +> trunk5
#: kstars.kcfg:1674
#, kde-format
msgid "Star detection algorithm"
msgstr ""
#. i18n: ectx: label, entry (FocusAlgorithm), group (Focus)
#. +> trunk5
#: kstars.kcfg:1678
#, kde-format
msgid "Focus process algorithm"
msgstr ""
#. i18n: ectx: label, entry (FocusFramesCount), group (Focus)
#. +> trunk5
#: kstars.kcfg:1682
#, kde-format
msgid "Number of focus frames to average for HFR calculations."
msgstr ""
#. i18n: ectx: label, entry (DefaultAlignCCD), group (Align)
#. +> trunk5
#: kstars.kcfg:1688
#, kde-format
msgid "Default align module CCD."
msgstr ""
#. i18n: ectx: label, entry (DefaultAlignFW), group (Align)
#. +> trunk5
#: kstars.kcfg:1691
#, kde-format
msgid "Default align module Filter Wheel."
msgstr ""
#. i18n: ectx: label, entry (AlignExposure), group (Align)
#. +> trunk5
#: kstars.kcfg:1694
#, kde-format
msgid "Default alignment exposure value"
msgstr ""
#. i18n: ectx: whatsthis, entry (AlignExposure), group (Align)
#. +> trunk5
#: kstars.kcfg:1695
#, kde-format
msgid "Specifies exposure value of CCD in seconds when performing plate solving."
msgstr ""
#. i18n: ectx: label, entry (SolverBinningIndex), group (Align)
#. +> trunk5
#: kstars.kcfg:1699
#, kde-format
msgid "Default CCD binning index while in alignment mode"
msgstr ""
#. i18n: ectx: whatsthis, entry (SolverBinningIndex), group (Align)
#. +> trunk5
#: kstars.kcfg:1700
#, kde-format
msgid "Set binning index of CCD camera while in alignment mode. Default values 0-3 corresponding to 1x1 to 4x4 binning"
msgstr ""
#. i18n: ectx: whatsthis, entry (AstrometrySolverVerbose), group (Align)
#. +> trunk5
#: kstars.kcfg:1704
#, kde-format
msgid "Display detailed verbose messages of the astrometry solver process while in progress."
msgstr ""
#. i18n: ectx: whatsthis, entry (AstrometryUseRotator), group (Align)
#. +> trunk5
#: kstars.kcfg:1708
#, kde-format
msgid "Use rotator when performing load and slew."
msgstr ""
#. i18n: ectx: whatsthis, entry (AstrometryRotatorThreshold), group (Align)
#. +> trunk5
#: kstars.kcfg:1712
#, kde-format
msgid "Threshold between measured and FITS position angles in arcminutes to consider the load and slew operation successful."
msgstr ""
#. i18n: ectx: label, entry (SolverType), group (Align)
#. +> trunk5
#: kstars.kcfg:1716
#, kde-format
msgid "Set solver type (online, offline, remote)."
msgstr ""
#. i18n: ectx: label, entry (SolverScopeType), group (Align)
#. +> trunk5
#: kstars.kcfg:1720
#, kde-format
msgid "Index of telescope type to be used when solving an image. 0 for Primary, 1 for Guide"
msgstr ""
#. i18n: ectx: label, entry (SolverGotoOption), group (Align)
#. +> trunk5
#: kstars.kcfg:1724
#, kde-format
msgid "Action to take if solver if successful (Sync, Slew to Target, or None)"
msgstr ""
#. i18n: ectx: label, entry (AstrometrySolverWCS), group (Align)
#. +> trunk5
#: kstars.kcfg:1728
#, kde-format
msgid "World Coordinate System (WCS). WCS is used to encode RA/DEC coordinates in captured CCD images."
msgstr ""
#. i18n: ectx: label, entry (AstrometrySolverOverlay), group (Align)
#. +> trunk5
#: kstars.kcfg:1732
#, kde-format
msgid "Display received FITS images unto solver FOV rectangle in the sky map."
msgstr ""
#. i18n: ectx: label, entry (AstrometryDifferentialSlewing), group (Align)
#. +> trunk5
#: kstars.kcfg:1736
#, kde-format
msgid "Do not use Sync when Slew to Target is selected. Use differential slewing to correct for discrepancies."
msgstr ""
#. i18n: ectx: label, entry (SolverAccuracyThreshold), group (Align)
#. +> trunk5
#: kstars.kcfg:1740
#, kde-format
msgid "Accuracy threshold in arcseconds between solution and target coordinates."
msgstr ""
#. i18n: ectx: label, entry (LockAlignFilterIndex), group (Align)
#. +> trunk5
#: kstars.kcfg:1744
#, kde-format
msgid "Use specified filter index when performing astrometry regardless of current filter settings."
msgstr ""
#. i18n: ectx: label, entry (AlignDarkFrame), group (Align)
#. +> trunk5
#: kstars.kcfg:1748
#, kde-format
msgid "Take a dark frame and subtract it before running astrometry operation."
msgstr ""
#. i18n: ectx: label, entry (SettlingTime), group (Align)
#. +> trunk5
#: kstars.kcfg:1752
#, kde-format
msgid "Time to wait in milliseconds after telescope slewing is complete before starting the next capture."
msgstr ""
#. i18n: ectx: label, entry (AstrometryUseNoFITS2FITS), group (Align)
#. +> trunk5
#: kstars.kcfg:1756
#, kde-format
msgid "Do not sanitize FITS. This option should only be checked if astrometry.net version is 0.67 or earlier. Uncheck for any versions greater than 0.67."
msgstr ""
#. i18n: ectx: label, entry (AstrometryUseResort), group (Align)
#. +> trunk5
#: kstars.kcfg:1760
#, kde-format
msgid "Check this option if your image does not have much nebulosity. If it does have strong nebulosity, uncheck it."
msgstr ""
#. i18n: ectx: label, entry (AstrometryUseNoVerify), group (Align)
#. +> trunk5
#: kstars.kcfg:1764
#, kde-format
msgid "This will prevent the solver from looking at an already existing WCS Header before blindly trying to solve the image. It is recommended to keep it checked."
msgstr ""
#. i18n: ectx: label, entry (AstrometryUseImageScale), group (Align)
#. +> trunk5
#: kstars.kcfg:1768
#, kde-format
msgid "Set image scale to speed up solver as it does not have to search index files of different image scales."
msgstr ""
#. i18n: ectx: label, entry (AstrometryImageScaleLow), group (Align)
#. +> trunk5
#: kstars.kcfg:1772
#, kde-format
msgid "Lower image scale."
msgstr ""
#. i18n: ectx: label, entry (AstrometryImageScaleHigh), group (Align)
#. +> trunk5
#: kstars.kcfg:1775
#, kde-format
msgid "Upper image scale."
msgstr ""
#. i18n: ectx: label, entry (AstrometryAutoUpdateImageScale), group (Align)
#. +> trunk5
#: kstars.kcfg:1778
#, kde-format
msgid "Automatically update image scale when CCD or Mount parameters are updated."
msgstr ""
#. i18n: ectx: label, entry (AstrometryImageScaleUnits), group (Align)
#. +> trunk5
#: kstars.kcfg:1782
#, kde-format
msgid "Image scale units in arcminutes (aw), degrees (dw), or arcsec per pixel (app)"
msgstr ""
#. i18n: ectx: label, entry (AstrometryUseDownsample), group (Align)
#. +> trunk5
#: kstars.kcfg:1786
#, kde-format
msgid "Downsample the image to shrink its size and speed up the solver."
msgstr ""
#. i18n: ectx: label, entry (AstrometryDownsample), group (Align)
#. +> trunk5
#: kstars.kcfg:1790
#, kde-format
msgid "Downsample factor"
msgstr ""
#. i18n: ectx: label, entry (AstrometryUsePosition), group (Align)
#. +> trunk5
#: kstars.kcfg:1794
#, kde-format
msgid "Set estimated position to speed up astrometry solver as it does not have to search in other areas of the sky."
msgstr ""
#. i18n: ectx: label, entry (AstrometryPositionRA), group (Align)
#. +> trunk5
#: kstars.kcfg:1798
#, kde-format
msgid "User supplied Right Ascension value in degrees to be passed to the solver."
msgstr ""
#. i18n: ectx: label, entry (AstrometryPositionDE), group (Align)
#. +> trunk5
#: kstars.kcfg:1801
#, kde-format
msgid "User supplied declination value in degrees to be passed to the solver."
msgstr ""
#. i18n: ectx: label, entry (AstrometryAutoUpdatePosition), group (Align)
#. +> trunk5
#: kstars.kcfg:1804
#, kde-format
msgid "Automatically update position coordinates when mounts completes slewing."
msgstr ""
#. i18n: ectx: label, entry (AstrometryRadius), group (Align)
#. +> trunk5
#: kstars.kcfg:1808
#, kde-format
msgid "The Search Radius for the Estimated Telescope/Image Field Position in degrees."
msgstr ""
#. i18n: ectx: label, entry (AstrometryDetectParity), group (Align)
#. +> trunk5
#: kstars.kcfg:1812
#, kde-format
msgid "Detect parity and reuse it to speed up solver."
msgstr ""
#. i18n: ectx: label, entry (AstrometryCustomOptions), group (Align)
#. i18n: ectx: label, entry (AstrometrySolverBinary), group (Align)
#. +> trunk5
#: kstars.kcfg:1819
#, kde-format
msgid "astrometry.net solve-field binary"
msgstr ""
#. i18n: ectx: whatsthis, entry (AstrometrySolverBinary), group (Align)
#. +> trunk5
#: kstars.kcfg:1820
#, kde-format
msgid "Path to astrometry.net solver location."
msgstr ""
#. i18n: ectx: label, entry (AstrometryWCSInfo), group (Align)
#. +> trunk5
#: kstars.kcfg:1828
#, kde-format
msgid "astrometry.net wcsinfo binary"
msgstr ""
#. i18n: ectx: whatsthis, entry (AstrometryWCSInfo), group (Align)
#. +> trunk5
#: kstars.kcfg:1829
#, kde-format
msgid "Path to astrometry.net wcsinfo location."
msgstr ""
#. i18n: ectx: label, entry (AstrometryConfFile), group (Align)
#. +> trunk5
#: kstars.kcfg:1837
#, kde-format
msgid "astrometry.net configuration file"
msgstr ""
#. i18n: ectx: whatsthis, entry (AstrometryConfFile), group (Align)
#. +> trunk5
#: kstars.kcfg:1838
#, kde-format
msgid "Path to astrometry.net file location."
msgstr ""
#. i18n: ectx: label, entry (AstrometryConfFileIsInternal), group (Align)
#. +> trunk5
#: kstars.kcfg:1842
#, kde-format
msgid "Internal or External Astrometry.net Conf File?"
msgstr ""
#. i18n: ectx: label, entry (AstrometryAPIKey), group (Align)
#. +> trunk5
#: kstars.kcfg:1846
#, kde-format
msgid "astrometry.net API Key"
msgstr ""
#. i18n: ectx: whatsthis, entry (AstrometryAPIKey), group (Align)
#. +> trunk5
#: kstars.kcfg:1847
#, kde-format
msgid "Key to access astrometry.net online web services. You must register with astrometry.net to obtain a key."
msgstr ""
#. i18n: ectx: label, entry (AstrometryAPIURL), group (Align)
#. +> trunk5
#: kstars.kcfg:1851
#, kde-format
msgid "astrometry.net API URL"
msgstr ""
#. i18n: ectx: label, entry (AstrometryUseJPEG), group (Align)
#. +> trunk5
#: kstars.kcfg:1855
#, kde-format
msgid "Use JPEG format, instead of FITS, to upload images to the astrometry.net online service."
msgstr ""
#. i18n: ectx: label, entry (AstrometryTimeout), group (Align)
#. +> trunk5
#: kstars.kcfg:1859
#, kde-format
msgid "Timeout in seconds to wait for astrometry solver to complete."
msgstr ""
#. i18n: ectx: label, entry (DefaultGuideCCD), group (Guide)
#. +> trunk5
#: kstars.kcfg:1865
#, kde-format
msgid "Default guide module CCD."
msgstr ""
#. i18n: ectx: label, entry (DefaultST4Driver), group (Guide)
#. +> trunk5
#: kstars.kcfg:1868
#, kde-format
msgid "Default guide module ST4 Driver."
msgstr ""
#. i18n: ectx: label, entry (GuideExposure), group (Guide)
#. +> trunk5
#: kstars.kcfg:1871
#, kde-format
msgid "Guider exposure duration in seconds."
msgstr ""
#. i18n: ectx: label, entry (GuiderType), group (Guide)
#. +> trunk5
#: kstars.kcfg:1875
#, kde-format
msgid "Which guider process to utilize for guiding (0 Internal Guider, 1 PHD2, 2 lin_guider)"
msgstr ""
#. i18n: ectx: label, entry (GuideAlgorithm), group (Guide)
#. +> trunk5
#: kstars.kcfg:1879
#, kde-format
msgid "Which Algorithm to use track guide square (0 smart, 1 fast, 2 threshold, 3 no threshold)."
msgstr ""
#. i18n: ectx: label, entry (PHD2Host), group (Guide)
#. +> trunk5
#: kstars.kcfg:1883
#, kde-format
msgid "Host name of external PHD2 service"
msgstr ""
#. i18n: ectx: label, entry (PHD2Port), group (Guide)
#. +> trunk5
#: kstars.kcfg:1887
#, kde-format
msgid "PHD2 Event Monitoring Port"
msgstr ""
#. i18n: ectx: label, entry (LinGuiderHost), group (Guide)
#. +> trunk5
#: kstars.kcfg:1891
#, kde-format
msgid "Host name of external lin_guider service"
msgstr ""
#. i18n: ectx: label, entry (LinGuiderPort), group (Guide)
#. +> trunk5
#: kstars.kcfg:1895
#, kde-format
msgid "Lin_guider Event Monitoring Port"
msgstr ""
#. i18n: ectx: label, entry (GuideScopeType), group (Guide)
#. +> trunk5
#: kstars.kcfg:1899
#, kde-format
msgid "Index of telescope type to be used when guiding. 0 for Primary, 1 for Guide"
msgstr ""
#. i18n: ectx: label, entry (CalibrationPulseDuration), group (Guide)
#. +> trunk5
#: kstars.kcfg:1903
#, kde-format
msgid "Pulse duration in milliseconds used for guiding pulses during calibration stage."
msgstr ""
#. i18n: ectx: label, entry (GuideSquareSizeIndex), group (Guide)
#. +> trunk5
#: kstars.kcfg:1907
#, kde-format
msgid "Guide square size index (0 to 4) corresponding to pixel sizes (8 to 128)."
msgstr ""
#. i18n: ectx: label, entry (ImageGuidingEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:1911
#, kde-format
msgid "Use Image Guiding algorithms instead of classical centroid guiding."
msgstr ""
#. i18n: ectx: label, entry (GuideRegionAxis), group (Guide)
#. +> trunk5
#: kstars.kcfg:1915
#, kde-format
msgid "Region Axis Index (0 to 4) corresponding to NxN partition size used Image Guiding (64 to 1024)."
msgstr ""
#. i18n: ectx: label, entry (GuideAutoStarEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:1919
#, kde-format
msgid "Automatically select calibration star and perform calibration."
msgstr ""
#. i18n: ectx: label, entry (GuideRemoteImagesEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:1927
#, kde-format
msgid "When using external guiders, enable reception of remote images in Ekos guide module. By default, remote images are disabled."
msgstr ""
#. i18n: ectx: label, entry (AutoModeIterations), group (Guide)
#. +> trunk5
#: kstars.kcfg:1931
#, kde-format
msgid "Number of automode iterations for calibration process."
msgstr ""
#. i18n: ectx: label, entry (TwoAxisEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:1935
#, kde-format
msgid "Use both axes to perform calibration."
msgstr ""
#. i18n: ectx: label, entry (RapidGuideEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:1939
#, kde-format
msgid "Use driver side Rapid Guide to perform guiding."
msgstr ""
#. i18n: ectx: label, entry (GuideDarkFrameEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:1943
#, kde-format
msgid "Take dark frame for autoguider images."
msgstr ""
#. i18n: ectx: label, entry (GuideSubframeEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:1947
#, kde-format
msgid "Subframe guide image around selected region"
msgstr ""
#. i18n: ectx: label, entry (DitherPixels), group (Guide)
#. +> trunk5
#: kstars.kcfg:1951
#, kde-format
msgid "How many pixels to move between subsequent exposures under auto dithering mode."
msgstr ""
#. i18n: ectx: label, entry (DitherFrames), group (Guide)
#. +> trunk5
#: kstars.kcfg:1955
#, kde-format
msgid "Dither after this many frames."
msgstr ""
#. i18n: ectx: label, entry (DitherThreshold), group (Guide)
#. +> trunk5
#: kstars.kcfg:1963
#, kde-format
msgid "Maximum distance (pixels) for guiding to be considered settled."
msgstr ""
#. i18n: ectx: label, entry (DitherTimeout), group (Guide)
#. +> trunk5
#: kstars.kcfg:1967
#, kde-format
msgid "Time limit (seconds) on dithering to settle down."
msgstr ""
#. i18n: ectx: label, entry (DitherMaxIterations), group (Guide)
#. +> trunk5
#: kstars.kcfg:1971
#, kde-format
msgid "How many dithering attempts to undertake before giving up."
msgstr ""
#. i18n: ectx: label, entry (DitherNoGuidingPulse), group (Guide)
#. +> trunk5
#: kstars.kcfg:1975
#, kde-format
msgid "Pulse length in milliseconds used for non-guiding dither."
msgstr ""
#. i18n: ectx: label, entry (DitherFailAbortsAutoGuide), group (Guide)
#. +> trunk5
#: kstars.kcfg:1979
#, kde-format
msgid "If dithering fails then abort autoguide."
msgstr ""
#. i18n: ectx: label, entry (DitherEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:1983
#, kde-format
msgid "Use Auto Dithering when guiding."
msgstr ""
#. i18n: ectx: label, entry (DitherNoGuiding), group (Guide)
#. +> trunk5
#: kstars.kcfg:1987
#, kde-format
msgid "Perform dithering even when not guiding."
msgstr ""
#. i18n: ectx: label, entry (AOLimit), group (Guide)
#. +> trunk5
#: kstars.kcfg:1991
#, kde-format
msgid "The Adaptive Optics unit is utilized if the guiding deviation is less than this limit in arcseconds. Once exceeded, mechanical guiding is utilized."
msgstr ""
#. i18n: ectx: label, entry (RAGuideEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:1995
#, kde-format
msgid "Enable autoguiding in the RA axis."
msgstr ""
#. i18n: ectx: label, entry (DECGuideEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:1999
#, kde-format
msgid "Enable autoguiding in the DEC axis."
msgstr ""
#. i18n: ectx: label, entry (NorthDECGuideEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:2003
#, kde-format
msgid "Enable North autoguiding in the DEC axis."
msgstr ""
#. i18n: ectx: label, entry (SouthDECGuideEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:2007
#, kde-format
msgid "Enable South autoguiding in the DEC axis."
msgstr ""
#. i18n: ectx: label, entry (EastRAGuideEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:2011
#, kde-format
msgid "Enable East autoguiding in the RA axis."
msgstr ""
#. i18n: ectx: label, entry (WestRAGuideEnabled), group (Guide)
#. +> trunk5
#: kstars.kcfg:2015
#, kde-format
msgid "Enable West autoguiding in the RA axis."
msgstr ""
#. i18n: ectx: label, entry (GuiderAccuracyThreshold), group (Guide)
#. +> trunk5
#: kstars.kcfg:2052
#, kde-format
msgid "Accuracy threshold for the Guide Graphs."
msgstr ""
#. i18n: ectx: label, entry (RADisplayedOnGuideGraph), group (Guide)
#. +> trunk5
#: kstars.kcfg:2056
#, kde-format
msgid "Display the RA Plot on the Guide Drift Graphics."
msgstr ""
#. i18n: ectx: label, entry (DEDisplayedOnGuideGraph), group (Guide)
#. +> trunk5
#: kstars.kcfg:2060
#, kde-format
msgid "Display the DEC Plot on the Guide Drift Graphics."
msgstr ""
#. i18n: ectx: label, entry (RACorrDisplayedOnGuideGraph), group (Guide)
#. +> trunk5
#: kstars.kcfg:2064
#, kde-format
msgid "Display the RA Corrections Plot on the Guide Drift Graphics."
msgstr ""
#. i18n: ectx: label, entry (DECorrDisplayedOnGuideGraph), group (Guide)
#. +> trunk5
#: kstars.kcfg:2068
#, kde-format
msgid "Display the DEC Corrections Plot on the Guide Drift Graphics."
msgstr ""
#. i18n: ectx: whatsthis, entry (SchedulerLogging), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2074
#, kde-format
msgid "Log Ekos Scheduler Module activity."
msgstr ""
#. i18n: ectx: whatsthis, entry (SortSchedulerJobs), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2078
#, kde-format
msgid "Sort scheduler jobs by priority and altitude."
msgstr ""
#. i18n: ectx: label, entry (StopEkosAfterShutdown), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2082
#, kde-format
msgid "After shutdown procedure is successfully executed, shutdown INDI and Ekos."
msgstr ""
#. i18n: ectx: label, entry (ShutdownScriptTerminatesINDI), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2086
#, kde-format
msgid "Whether shutdown script, if exists, terminates INDI server in the process."
msgstr ""
#. i18n: ectx: label, entry (PreemptiveShutdown), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2090
#, kde-format
msgid "Perform pre-emptive shutdown if no jobs are due for a number of hours."
msgstr ""
#. i18n: ectx: label, entry (ResetMountModelOnAlignFail), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2094
#, kde-format
msgid "Reset mount model in case of alignment failure."
msgstr ""
#. i18n: ectx: label, entry (PreemptiveShutdownTime), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2098
#, kde-format
msgid "Maximum number of hours before the next job is due to trigger a pre-emptive shutdown."
msgstr ""
#. i18n: ectx: label, entry (LeadTime), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2102
#, kde-format
msgid "Minimum time between jobs in minutes."
msgstr ""
#. i18n: ectx: label, entry (PreDawnTime), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2106
#, kde-format
msgid "Do not permit jobs to be scheduled or executed past this many minutes before dawn."
msgstr ""
#. i18n: ectx: label, entry (TelescopeFocalLength), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2110
#, kde-format
msgid "Telescope focal length in millimeters."
msgstr ""
#. i18n: ectx: label, entry (CameraPixelWidth), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2114
#, kde-format
msgid "Camera pixel size width in micrometers."
msgstr ""
#. i18n: ectx: label, entry (CameraPixelHeight), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2118
#, kde-format
msgid "Camera pixel size height in micrometers."
msgstr ""
#. i18n: ectx: label, entry (CameraWidth), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2122
#, kde-format
msgid "Camera Width in pixels."
msgstr ""
#. i18n: ectx: label, entry (CameraHeight), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2126
#, kde-format
msgid "Camera Height in pixels."
msgstr ""
#. i18n: ectx: label, entry (CameraRotation), group (Scheduler)
#. +> trunk5
#: kstars.kcfg:2130
#, kde-format
msgid "Position angle of the camera with respect to north."
msgstr ""
#. i18n: ectx: label, entry (LastServer), group (INDI Lite)
#. +> trunk5
#: kstars.kcfg:2136
#, kde-format
msgid "The address of last used server"
msgstr ""
#. i18n: ectx: label, entry (LastServerPort), group (INDI Lite)
#. +> trunk5
#: kstars.kcfg:2139
#, kde-format
msgid "The port of last used server"
msgstr ""
#. i18n: ectx: label, entry (LastWebManagerPort), group (INDI Lite)
#. +> trunk5
#: kstars.kcfg:2143
#, kde-format
msgid "The port of last used Web Manager"
msgstr ""
#. i18n: ectx: label, entry (HIPSMemoryCache), group (HIPS)
#. +> trunk5
#: kstars.kcfg:2149
#, kde-format
msgid "RAM cache size in MB used to store cached HIPS images."
msgstr ""
#. i18n: ectx: label, entry (HIPSNetCache), group (HIPS)
#. +> trunk5
#: kstars.kcfg:2153
#, kde-format
msgid "Hard disk cache size in MB used to store cached HIPS images."
msgstr ""
#. i18n: ectx: label, entry (HIPSSource), group (HIPS)
#. +> trunk5
#: kstars.kcfg:2157
#, kde-format
msgid "HIPS source catalog title."
msgstr ""
#. i18n: ectx: label, entry (HIPSBiLinearInterpolation), group (HIPS)
#. +> trunk5
#: kstars.kcfg:2161
#, kde-format
msgid "Use Bilinear interpolation when rendering HiPS images?"
msgstr ""
#. i18n: ectx: label, entry (HIPSShowGrid), group (HIPS)
#. +> trunk5
#: kstars.kcfg:2165
#, kde-format
msgid "Show HiPS grid on the sky map."
msgstr ""
#. i18n: ectx: label, entry (ShowHIPS), group (HIPS)
#. +> trunk5
#: kstars.kcfg:2169
#, kde-format
msgid "Draw HiPS sources in the sky map?"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowHIPS), group (HIPS)
#. +> trunk5
#: kstars.kcfg:2170
#, kde-format
msgid "Toggle whether the HIPS sources are drawn in the sky map."
#. i18n("xy-curve from a Fourier filter"), cartesianPlotAddNewActionGroup);
#. addFourierTransformCurveAction = new QAction(QIcon::fromTheme("labplot-xy-fourier_transform-curve"), i18n("xy-curve from a Fourier transform"), cartesianPlotAddNewActionGroup);
#. i18n("xy-curve from an interpolation"), this);
#. addSmoothCurveAction = new QAction(QIcon::fromTheme("labplot-xy-smooth-curve"), i18n("xy-curve from a smooth"), this);
#. addFourierFilterCurveAction = new QAction(QIcon::fromTheme("labplot-xy-fourier_filter-curve"), i18n("xy-curve from a Fourier filter"), this);
#. addFourierTransformCurveAction = new QAction(QIcon::fromTheme("labplot-xy-fourier_transform-curve"), i18n("xy-curve from a Fourier transform"), this);
"For 'C Format', a period is used for the decimal point character and comma is used for the thousands group separator. Valid number representations are:"
"<ul>"
"<li>1234.56</li>"
"<li>1,234.56</li>"
"<li>etc.</li>"
"</ul>"
"When using 'System locale', the system settings will be used. E.g., for the German local the valid number representations are:"
msgid "This option determines how the imported strings have to be converted to calendar date, i.e. year, month, and day numbers in the Gregorian calendar and to time."
"<p>The ICC profiles folder seems to be invalid.</p>"
"<p>If you want to try setting it again, choose \"Yes\" here, otherwise choose \"No\", and the \"Color Management\" feature will be disabled until you solve this issue.</p>"
msgid "Updates metadata of images in the current album with the contents of digiKam database (image metadata will be overwritten with data from the database)."
msgid "Updates the digiKam database from the metadata of the files in the current album (information in the database will be overwritten with data from the files' metadata)."
msgid "Open camera dialog for the device with Solid UDI <udi>"
msgstr ""
#. +> trunk5
#: app/main/main.cpp:101
#, kde-format
msgid "Automatically detect and open a connected gphoto2 camera"
msgstr ""
#. +> trunk5
#: app/main/main.cpp:103
#, kde-format
msgid "Start digikam with the SQLite database file found in the directory <dir>"
msgstr ""
#. +> trunk5
#: app/main/main.cpp:106
#, kde-format
msgid "Start digikam with the configuration file <config>"
msgstr ""
#. +> trunk5
#: app/main/main.cpp:126
#, kde-format
msgid ""
"Run-time Qt SQLite or MySQL database plugin is not available. please install it.\n"
"There is no database plugin installed on your computer."
msgstr ""
#. +> trunk5
#: app/main/main.cpp:135
#, kde-format
msgid ""
"Run-time Qt SQLite or MySQL database plugin are not available. Please install it.\n"
"Database plugins installed on your computer are listed below."
msgstr ""
#. +> trunk5
#: app/main/main.cpp:172
#, kde-format
msgid "<p>The given path for the config file is not valid. Either its parent directory does not exist, it is a directory itself or it cannot be read/written to.</p>"
msgid "Are you sure you want to delete those items permanently?"
msgstr ""
#. +> trunk5
#: app/views/trashview.cpp:242
#, kde-format
msgid "Are you sure you want to delete ALL items permanently?"
msgstr ""
#. +> trunk5
#: app/views/welcomepageview.cpp:85
#, kde-format
msgid "Port to Qt5 and KF5;"
msgstr ""
#. +> trunk5
#: app/views/welcomepageview.cpp:86
#, kde-format
msgid "Replacing digiKam KIOSlaves by a multi-threaded interface to query the database;"
msgstr ""
#. +> trunk5
#: app/views/welcomepageview.cpp:87
#, kde-format
msgid "Replacing Qt5::Multimedia dependency by QtAV framework to handle video files;"
msgstr ""
#. +> trunk5
#: app/views/welcomepageview.cpp:88
#, kde-format
msgid "Add embedded trash support for each collection instead desktop trash;"
msgstr ""
#. +> trunk5
#: app/views/welcomepageview.cpp:89
#, kde-format
msgid "Thumbs and preview video support is now delegate to QT5Multimedia framework;"
msgstr ""
#. +> trunk5
#: app/views/welcomepageview.cpp:90
#, kde-format
msgid "Mysql internal server is now configurable as Sqlite to store database files at a customized place;"
msgstr ""
#. +> trunk5
#: app/views/welcomepageview.cpp:91
#, kde-format
msgid "Mysql internal/remote server is now configurable with first run assistant;"
msgstr ""
#. +> trunk5
#: app/views/welcomepageview.cpp:92
#, kde-format
msgid "Add a new garbage collector tool to cleanup database;"
msgstr ""
#. +> trunk5
#: app/views/welcomepageview.cpp:93
#, kde-format
msgid "Add a new batch queue manager tool to convert RAW files to DNG;"
msgstr ""
#. +> trunk5
#: app/views/welcomepageview.cpp:94
#, kde-format
msgid "Add a new tool to export contents in html gallery;"
msgstr ""
#. +> trunk5
#: app/views/welcomepageview.cpp:95
#, kde-format
msgid "Add a new tool to export contents as a video slideshow;"
msgstr ""
#. +> trunk5
#: app/views/welcomepageview.cpp:96
#, kde-format
msgid "Add a new tool to export contents by email;"
msgstr ""
#. +> trunk5
#: app/views/welcomepageview.cpp:97
#, kde-format
msgid "Add a new batch queue manager tool to adjust time and date metadata;"
msgstr ""
#. +> trunk5
#: app/views/welcomepageview.cpp:98
#, kde-format
msgid "Add a new batch queue manager tool to detect and fix red-eyes automatically;"
msgstr ""
#. +> trunk5
#: app/views/welcomepageview.cpp:99
#, kde-format
msgid "Add a new option in editor and light table to import images from a digital scanner;"
msgstr ""
#. +> trunk5
#: app/views/welcomepageview.cpp:100
#, kde-format
msgid "Add a new option in editor and light table to edit metadata;"
msgstr ""
#. +> trunk5
#: app/views/welcomepageview.cpp:101
#, kde-format
msgid "Add a new option in editor and light table to edit geolocation;"
msgstr ""
#. +> trunk5
#: app/views/welcomepageview.cpp:102
#, kde-format
msgid "Add a new option in editor and light table to run presentation tool;"
msgstr ""
#. +> trunk5
#: app/views/welcomepageview.cpp:103
#, kde-format
msgid "Add a new editor tool to detect and fix red-eyes automatically;"
msgstr ""
#. +> trunk5
#: app/views/welcomepageview.cpp:104
#, kde-format
msgid "Add a new editor tool to perform color change based on Lut3D;"
msgstr ""
#. +> trunk5
#: app/views/welcomepageview.cpp:105
#, kde-format
msgid "Add a new tool in camera import interface to convert RAW files to DNG;"
msgstr ""
#. +> trunk5
#: app/views/welcomepageview.cpp:106
#, kde-format
msgid "Add a new tool to export items on local network through UPNP/DLNA;"
msgstr ""
#. +> trunk5
#: app/views/welcomepageview.cpp:107
#, kde-format
msgid "Consolidation of Mysql database backend;"
msgstr ""
#. +> trunk5
#: app/views/welcomepageview.cpp:108
#, kde-format
msgid "Improved startup time with differed scan for new items stage."
msgstr ""
#. +> trunk5
#: app/views/welcomepageview.cpp:109
#, kde-format
msgid "Presentation and Slideshow tools now support video."
msgstr ""
#. +> trunk5
#: app/views/welcomepageview.cpp:111
#, kde-format
msgid "...and much more."
msgstr ""
#. +> trunk5
#: app/views/welcomepageview.cpp:117
#, kde-format
msgid ""
"<li>%1</li>"
"\n"
msgstr ""
#. +> trunk5
#: app/views/welcomepageview.cpp:120
#, kde-format
msgid "New Features"
msgstr ""
#. +> trunk5
#: app/views/welcomepageview.cpp:122
#, kde-format
msgid ""
"<h3>%1</h3>"
"<ul>%2</ul>"
msgstr ""
#. +> trunk5
#: app/views/welcomepageview.cpp:123
#, kde-format
msgid "Some of the new features in this release of digiKam include (compared to digiKam 4.x):"
msgstr ""
#. +> trunk5
#: app/views/welcomepageview.cpp:132
#, kde-format
msgid "About"
msgstr ""
#. +> trunk5
#: app/views/welcomepageview.cpp:134
#, kde-format
msgid ""
"<h3>%1</h3>"
"<h3>%2</h3>"
"<ul>%3</ul>"
msgstr ""
#. +> trunk5
#: app/views/welcomepageview.cpp:135
#, kde-format
msgid "digiKam is an open source photo management program designed to import, organize, enhance, search and export your digital images to and from your computer."
msgstr ""
#. +> trunk5
#: app/views/welcomepageview.cpp:136
#, kde-format
msgid "Currently, you are in the Album view mode of digiKam. Albums are the places where your files are stored, and are identical to the folders on your hard disk."
msgstr ""
#. +> trunk5
#: app/views/welcomepageview.cpp:137
#, kde-format
msgid ""
"<li>%1</li>"
"<li>%2</li>"
msgstr ""
#. +> trunk5
#: app/views/welcomepageview.cpp:138
#, kde-format
msgid "digiKam has many powerful features which are described in the <a href=\"https://docs.kde.org/trunk5/en/extragear-graphics/digikam/index.html\">documentation</a>"
msgstr ""
#. +> trunk5
#: app/views/welcomepageview.cpp:139
#, kde-format
msgid "The <a href=\"http://www.digikam.org\">digiKam homepage</a> provides information about new versions of digiKam."
msgid "Failed to backup the existing database file (\"%1\"). Refusing to replace file without backup, using the existing file."
msgstr ""
#. +> trunk5
#: libs/album/albummanager.cpp:426
#, kde-format
msgid "Failed to copy the old database file (\"%1\") to its new location (\"%2\"). Starting with an empty database."
msgstr ""
#. +> trunk5
#: libs/album/albummanager.cpp:460
#, kde-format
msgid "Database Folder"
msgstr ""
#. +> trunk5
#: libs/album/albummanager.cpp:461
#, kde-format
msgid ""
"<p>You have chosen the folder \"%1\" as the place to store the database. A database file from an older version of digiKam is found in this folder.</p>"
" "
"<p>Would you like to upgrade the old database file - confirming that this database file was indeed created for the pictures located in the folder \"%2\" - or ignore the old file and start with a new database?</p>"
"<p>You have chosen the folder \"%1\" as the new place to store the database. A database file from an older version of digiKam is found in this folder.</p>"
" "
"<p>Would you like to upgrade the old database file, start with a new database, or copy the current database to this location and continue using it?</p>"
"<p>You have chosen the folder \"%1\" as the new place to store the database. A database file from an older version of digiKam is found in this folder.</p>"
" "
"<p>Would you like to upgrade the old database file or start with a new database?</p>"
msgstr ""
#. +> trunk5
#: libs/album/albummanager.cpp:578
#, kde-format
msgid "Failed to copy the old database file (\"%1\") to its new location (\"%2\"). Trying to upgrade old databases."
msgstr ""
#. +> trunk5
#: libs/album/albummanager.cpp:593
#, kde-format
msgid ""
"<p>You have chosen the folder \"%1\" as the new place to store the database.</p>"
"<p>Would you like to copy the current database to this location and continue using it, or start with a new database?</p>"
" "
msgstr ""
#. +> trunk5
#: libs/album/albummanager.cpp:624
#, kde-format
msgid ""
"<p>You have chosen the folder \"%1\" as the new place to store the database. There is already a database file in this location.</p>"
" "
"<p>Would you like to use this existing file as the new database, or remove it and copy the current database to this place?</p>"
" "
msgstr ""
#. +> trunk5
#: libs/album/albummanager.cpp:634
#, kde-format
msgid "Use Existing File"
msgstr ""
#. +> trunk5
#: libs/album/albummanager.cpp:735
#, kde-format
msgid ""
"<p><b>An error occurred during the internal server start.</b></p>"
"<p>You cannot use digiKam without a working database. digiKam will attempt to start now, but it will <b>not</b> be functional. Please check the database settings in the <b>configuration menu</b>.</p>"
msgstr ""
#. +> trunk5
#: libs/album/albummanager.cpp:792
#, kde-format
msgid ""
"<p>Failed to open the database. Error message from database:</p>"
"<p><b>%1</b></p>"
"</p>"
"<p>You cannot use digiKam without a working database. digiKam will attempt to start now, but it will <b>not</b> be functional. Please check the database settings in the <b>configuration menu</b>.</p>"
msgstr ""
#. +> trunk5
#: libs/album/albummanager.cpp:865
#, kde-format
msgid ""
"Your locale has changed since this album was last opened.\n"
"Old locale: %1, new locale: %2\n"
"If you have recently changed your locale, you need not be concerned.\n"
"Please note that if you switched to a locale that does not support some of the filenames in your collection, these files may no longer be found in the collection. If you are sure that you want to continue, click 'Yes'. Otherwise, click 'No' and correct your locale setting before restarting digiKam."
msgstr ""
#. +> trunk5
#: libs/album/albummanager.cpp:907
#, kde-format
msgid ""
"<p>The collection </p>"
"<p><b>%1</b><br/>"
"(%2)</p>"
"<p> is currently not found on your system.<br/>"
" Please choose the most appropriate option to handle this situation:</p>"
msgstr ""
#. +> trunk5
#: libs/album/albummanager.cpp:925
#, kde-format
msgid ""
"<p>The collection is still available, but the identifier changed.<br/>"
"This can be caused by restoring a backup, changing the partition layout or the file system settings.<br/>"
"The collection is now located at this place:</p>"
msgstr ""
#. +> trunk5
#: libs/album/albummanager.cpp:944
#, kde-format
msgid "The collection is located on a storage device which is not always attached. Mark the collection as a removable collection."
msgstr ""
#. +> trunk5
#: libs/album/albummanager.cpp:951
#, kde-format
msgid "Take no action now. I would like to solve the problem later using the setup dialog"
msgstr ""
#. +> trunk5
#: libs/album/albummanager.cpp:965
#, kde-format
msgid "Collection not found"
msgstr ""
#. +> trunk5
#: libs/album/albummanager.cpp:2155
#, kde-format
msgid "The collection location supplied is invalid or currently not available."
msgstr ""
#. +> trunk5
#: libs/album/albummanager.cpp:2163
#, kde-format
msgid "No album for collection location: Internal error"
msgstr ""
#. +> trunk5
#: libs/album/albummanager.cpp:2179
#, kde-format
msgid "No parent found for album."
msgstr ""
#. +> trunk5
#: libs/album/albummanager.cpp:2186
#, kde-format
msgid "Album name cannot be empty."
msgstr ""
#. +> trunk5
#: libs/album/albummanager.cpp:2192
#, kde-format
msgid "Album name cannot contain '/'."
msgstr ""
#. +> trunk5
#: libs/album/albummanager.cpp:2198
#, kde-format
msgid "createPAlbum does not accept the root album as parent."
msgid "This is a CD/DVD, which is identified by the label that you can set in your CD burning application. There is already another entry with the same label. The two will be distinguished by the files in the top directory, so please do not append files to the CD, or it will not be recognized. In the future, please set a unique label on your CDs and DVDs if you intend to use them with digiKam."
msgid "This is a CD/DVD. It will be identified by the label (\"%1\")that you have set in your CD burning application. If you create further CDs for use with digikam in the future, please remember to give them a unique label as well."
msgid "This entry will only be identified by the path where it is found on your system (\"%1\"). No more specific means of identification (UUID, label) is available."
msgid "It is not possible on your system to identify the storage medium of this path. It will be added using the file path as the only identifier. This will work well for your local hard disk."
msgid "The database is not valid: the \"DBVersion\" setting does not exist. The current database schema version cannot be verified. Try to start with an empty database. "
msgid "The database has been used with a more recent version of digiKam and has been updated to a database schema which cannot be used with this version. (This means this digiKam version is too old, or the database format is too recent.) Please use the more recent version of digiKam that you used before. "
msgid "Failed to open a database transaction on your database file \"%1\". This is unusual. Please check that you can access the file and no other process has currently locked the file. If the problem persists you can get help from the digikam-devel@kde.org mailing list. As well, please have a look at what digiKam prints on the console. "
msgid "The schema updating process from version 4 to 6 failed, caused by an error that we did not expect. You can try to discard your old database and start with an empty one. (In this case, please move the database files \"%1\" and \"%2\" from the directory \"%3\"). More probably you will want to report this error to the digikam-devel@kde.org mailing list. As well, please have a look at what digiKam prints on the console. "
msgid "Failed to update the database schema from version %1 to version %2. Please read the error messages printed on the console and report this error as a bug at bugs.kde.org. "
msgid "The database update action cannot be found. Please ensure that the dbconfig.xml file of the current version of digiKam is installed at the correct place. "
msgid "Failed to copy the old database file (\"%1\") to its new location (\"%2\"). Error message: \"%3\". Please make sure that the file can be copied, or delete it."
msgid "The old database file (\"%1\") has been copied to the new location (\"%2\") but it cannot be opened. Please delete both files and try again, starting with an empty database. "
msgid "No album library path has been found in the configuration file. Giving up the schema updating process. Please try with an empty database, or repair your configuration."
msgid "There was an error associating your albumLibraryPath (\"%1\") with a storage volume of your system. This problem may indicate that there is a problem with your installation. If you are working on Linux, check that HAL is installed and running. In any case, you can seek advice from the digikam-devel@kde.org mailing list. The database updating process will now be aborted because we do not want to create a new database based on false assumptions from a broken installation."
msgid "Could not open the configuration file <b>%1</b>. This file is installed with the digikam application and is absolutely required to run digikam. Please check your installation."
msgid "An old version of the configuration file <b>%1</b> is found. Please ensure that the version released with the running version of digiKam is installed. "
msgid "The database is not valid: the \"DBThumbnailsVersion\" setting does not exist. The current database schema version cannot be verified. Try to start with an empty database. "
msgid "The database has been used with a more recent version of digiKam and has been updated to a database schema which cannot be used with this version. (This means this digiKam version is too old, or the database format is to recent) Please use the more recent version of digikam that you used before. "
msgid "Database type or location must be different!"
msgstr ""
#. +> trunk5
#: libs/database/utils/dbmigrationdlg.cpp:224
#, kde-format
msgid "Internal server can only be used once!"
msgstr ""
#. +> trunk5
#: libs/database/utils/dbmigrationdlg.cpp:233
#, kde-format
msgid "Internal server is not used and is not active!"
msgstr ""
#. +> trunk5
#: libs/database/utils/dbmigrationdlg.cpp:277
#, kde-format
msgid "Database copied successfully."
msgstr ""
#. +> trunk5
#: libs/database/utils/dbmigrationdlg.cpp:281
#, kde-format
msgid "Database conversion canceled."
msgstr ""
#. +> trunk5
#: libs/database/utils/dbmigrationdlg.cpp:290
#, kde-format
msgid "Step Progress (%1)"
msgstr ""
#. +> trunk5
#: libs/database/utils/dbsettingswidget.cpp:160
#: libs/database/utils/dbsettingswidget.cpp:837
#, kde-format
msgid "Database Configuration"
msgstr ""
#. +> trunk5
#: libs/database/utils/dbsettingswidget.cpp:171
#, kde-format
msgid "SQLite"
msgstr ""
#. +> trunk5
#: libs/database/utils/dbsettingswidget.cpp:177
#, kde-format
msgid "Mysql Internal (experimental)"
msgstr ""
#. +> trunk5
#: libs/database/utils/dbsettingswidget.cpp:181
#, kde-format
msgid "MySQL Server (experimental)"
msgstr ""
#. +> trunk5
#: libs/database/utils/dbsettingswidget.cpp:185
#, kde-format
msgid ""
"<p>Select here the type of database backend.</p>"
"<p><b>SQlite</b> backend is for local database storage with a small or medium collection sizes. It is the default and recommended backend for collections with less than 100K items.</p>"
"<p><b>MySQL Internal</b> backend is for local database storage with huge collection sizes. This backend is recommend for local collections with more than 100K items.</p>"
"<p><i>Be careful: this one still in experimental stage.</i></p>"
"<p><b>MySQL Server</b> backend is a more robust solution especially for remote and shared database storage. It is also more efficient to manage huge collection sizes with more than 100K items.</p>"
"<p><i>Be careful: this one still in experimental stage.</i></p>"
msgstr ""
#. +> trunk5
#: libs/database/utils/dbsettingswidget.cpp:204
#, kde-format
msgid ""
"<p>Set here the location where the database files will be stored on your system. There are three databases: one for all collections properties, one to store compressed thumbnails, and one to store faces recognition metadata.<br/>"
"Write access is required to be able to edit image properties.</p>"
"<p>Databases are digiKam core engines. Take care to use a place hosted by fast hardware (as SSD) with enough free space especially for thumbnails database.</p>"
"<p>Note: a remote file system such as NFS, cannot be used here. For performance reasons, it's also recommended not to use removable media.</p>"
"<p></p>"
msgstr ""
#. +> trunk5
#: libs/database/utils/dbsettingswidget.cpp:224
#, kde-format
msgid "<p>Here you can configure locations where MySQL binary tools are located. digiKam will try to find these binaries automatically if they are already installed on your computer.</p>"
msgstr ""
#. +> trunk5
#: libs/database/utils/dbsettingswidget.cpp:233
#, kde-format
msgctxt "@title:group"
msgid "MySQL Binaries"
msgstr ""
#. +> trunk5
#: libs/database/utils/dbsettingswidget.cpp:268
#, kde-format
msgid "Host Name:"
msgstr ""
#. +> trunk5
#: libs/database/utils/dbsettingswidget.cpp:270
#, kde-format
msgid "Set the host computer name"
msgstr ""
#. +> trunk5
#: libs/database/utils/dbsettingswidget.cpp:271
#, kde-format
msgid ""
"This is the computer name running MySQL server.\n"
"This can be \"localhost\" for a local server, or the network computer\n"
" name (or IP address) in case of remote computer."
"This account must be available on the remote MySQL server when database have been created."
msgstr ""
#. +> trunk5
#: libs/database/utils/dbsettingswidget.cpp:287
#, kde-format
msgid "Password:"
msgstr ""
#. +> trunk5
#: libs/database/utils/dbsettingswidget.cpp:289
#, kde-format
msgid ""
"Set the MySQL server account password used\n"
"by digiKam to be connected to the server.\n"
"You can left this field empty to use an account set without password."
msgstr ""
#. +> trunk5
#: libs/database/utils/dbsettingswidget.cpp:294
#, kde-format
msgid "Host Port:"
msgstr ""
#. +> trunk5
#: libs/database/utils/dbsettingswidget.cpp:296
#, kde-format
msgid ""
"Set the host computer port.\n"
"Usually, MySQL server use port number 3306 by default"
msgstr ""
#. +> trunk5
#: libs/database/utils/dbsettingswidget.cpp:301
#, kde-format
msgid "Check Connection"
msgstr ""
#. +> trunk5
#: libs/database/utils/dbsettingswidget.cpp:302
#, kde-format
msgid "Run a basic database connection to see if current MySQL server settings is suitable."
msgstr ""
#. +> trunk5
#: libs/database/utils/dbsettingswidget.cpp:308
#, kde-format
msgid "Core Db Name:"
msgstr ""
#. +> trunk5
#: libs/database/utils/dbsettingswidget.cpp:310
#, kde-format
msgid "Set the core database name"
msgstr ""
#. +> trunk5
#: libs/database/utils/dbsettingswidget.cpp:311
#, kde-format
msgid ""
"The core database is lead digiKam container used to store\n"
"albums, items, and searches metadata."
msgstr ""
#. +> trunk5
#: libs/database/utils/dbsettingswidget.cpp:314
#, kde-format
msgid "Thumbs Db Name:"
msgstr ""
#. +> trunk5
#: libs/database/utils/dbsettingswidget.cpp:316
#, kde-format
msgid "Set the thumbnails database name"
msgstr ""
#. +> trunk5
#: libs/database/utils/dbsettingswidget.cpp:317
#, kde-format
msgid ""
"The thumbnails database is used by digiKam to host\n"
"image thumbs with wavelets compression images.\n"
"This one can use quickly a lots of space,\n"
"especially if you have huge collections."
msgstr ""
#. +> trunk5
#: libs/database/utils/dbsettingswidget.cpp:321
#, kde-format
msgid "Face Db Name:"
msgstr ""
#. +> trunk5
#: libs/database/utils/dbsettingswidget.cpp:323
#, kde-format
msgid "Set the face database name"
msgstr ""
#. +> trunk5
#: libs/database/utils/dbsettingswidget.cpp:324
#, kde-format
msgid ""
"The face database is used by digiKam to host image histograms\n"
"dedicated to faces recognition process.\n"
"This one can use quickly a lots of space, especially\n"
"if you a lots of image with people faces detected and tagged."
msgstr ""
#. +> trunk5
#: libs/database/utils/dbsettingswidget.cpp:329
#, kde-format
msgid "Default Settings"
msgstr ""
#. +> trunk5
#: libs/database/utils/dbsettingswidget.cpp:330
#, kde-format
msgid "Reset database names settings to common default values."
msgstr ""
#. +> trunk5
#: libs/database/utils/dbsettingswidget.cpp:348
#, kde-format
msgid "Remote Server Settings"
msgstr ""
#. +> trunk5
#: libs/database/utils/dbsettingswidget.cpp:352
#, kde-format
msgid "Database Server Instructions"
msgstr ""
#. +> trunk5
#: libs/database/utils/dbsettingswidget.cpp:354
#, kde-format
msgid ""
"<p>digiKam expects that database is already created with a dedicated user account. This user name <i>digikam</i> will require full access to the database.<br>"
"If your database is not already set up, you can use the following SQL commands (after replacing the <b><i>password</i></b> with the correct one).<br>"
msgstr ""
#. +> trunk5
#: libs/database/utils/dbsettingswidget.cpp:366
#, kde-format
msgid ""
"<p>Note: with a Linux server, a database can be initialized following the commands below:</p>"
"<p># su</p>"
"<p># systemctl restart mysqld</p>"
"<p># mysql -u root</p>"
"<p>...</p>"
"<p>Enter SQL code to Mysql prompt in order to init digiKam databases with grant privileges (see behind)</p>"
"<p>...</p>"
"<p>quit</p>"
"<p>NOTE: If you've an enormous collection, you should start MySQL server with mysql --max_allowed_packet=128M OR in my.ini or ~/.my.cnf, change the settings</p>"
msgstr ""
#. +> trunk5
#: libs/database/utils/dbsettingswidget.cpp:385
#, kde-format
msgid "Requirements"
msgstr ""
#. +> trunk5
#: libs/database/utils/dbsettingswidget.cpp:389
#, kde-format
msgid "Database Server Technical Details"
msgstr ""
#. +> trunk5
#: libs/database/utils/dbsettingswidget.cpp:391
#, kde-format
msgid ""
"<p>Use this configuration view to set all information to be connected to a remote <a href=\"https://en.wikipedia.org/wiki/MySQL\">Mysql database server</a> (or <a href=\"https://en.wikipedia.org/wiki/MariaDB\">MariaDB</a>) through a network. As with Sqlite or MySQL internal server, 3 databases will be stored on the remote server: one for all collections properties, one to store compressed thumbnails, and one to store faces recognition metadata.</p>"
"<p>Unlike Sqlite or MySQL internal server, you can customize the database names to simplify your backups.</p>"
"<p>Databases are digiKam core engines. To prevent performance issues, take a care to use a fast network link between the client and the server computers. It's also recommended to host database files on fast hardware (as <a href=\"https://en.wikipedia.org/wiki/Solid-state_drive\">SSD</a>) with enough free space, especially for thumbnails database, even if data are compressed using wavelets image format <a href=\"https://en.wikipedia.org/wiki/Progressive_Graphics_File\">PGF</a>.</p>"
"<p>The databases must be created previously on the remote server by the administrator. Look in <b>Requirements</b> tab for details.</p>"
msgstr ""
#. +> trunk5
#: libs/database/utils/dbsettingswidget.cpp:417
#, kde-format
msgid "Documentation"
msgstr ""
#. +> trunk5
#: libs/database/utils/dbsettingswidget.cpp:613
#: libs/database/utils/dbsettingswidget.cpp:618
#, kde-format
msgid "Database connection test"
msgstr ""
#. +> trunk5
#: libs/database/utils/dbsettingswidget.cpp:614
#, kde-format
msgid "Database connection test successful."
msgstr ""
#. +> trunk5
#: libs/database/utils/dbsettingswidget.cpp:619
#, kde-format
msgid ""
"Database connection test was not successful. "
"<p>Error was: %1</p>"
msgstr ""
#. +> trunk5
#: libs/database/utils/dbsettingswidget.cpp:628
#, kde-format
msgid "The server hostname is empty"
msgstr ""
#. +> trunk5
#: libs/database/utils/dbsettingswidget.cpp:634
#, kde-format
msgid "The server user name is empty"
msgstr ""
#. +> trunk5
#: libs/database/utils/dbsettingswidget.cpp:645
#, kde-format
msgid "The core database name is empty"
msgstr ""
#. +> trunk5
#: libs/database/utils/dbsettingswidget.cpp:651
#, kde-format
msgid "The thumbnails database name is empty"
msgstr ""
#. +> trunk5
#: libs/database/utils/dbsettingswidget.cpp:657
#, kde-format
msgid "The face database name is empty"
msgstr ""
#. +> trunk5
#: libs/database/utils/dbsettingswidget.cpp:719
#, kde-format
msgid "This path was set as a command lineoption (--database-directory)."
msgstr ""
#. +> trunk5
#: libs/database/utils/dbsettingswidget.cpp:838
#, kde-format
msgid ""
"The database names configuration is not valid. Error is <br/>"
"<p>%1</p>"
"<br/>"
"Please check your configuration."
msgstr ""
#. +> trunk5
#: libs/database/utils/dbsettingswidget.cpp:846
#, kde-format
msgid "Database Connection Test"
msgstr ""
#. +> trunk5
#: libs/database/utils/dbsettingswidget.cpp:847
#, kde-format
msgid ""
"Testing database connection has failed with error<br/>"
"<p>%1</p>"
"<br/>"
"Please check your configuration."
msgstr ""
#. +> trunk5
#: libs/database/utils/dbsettingswidget.cpp:868
#, kde-format
msgid "You must select a folder for digiKam to store information and metadata in a database file."
msgstr ""
#. +> trunk5
#: libs/database/utils/dbsettingswidget.cpp:877
#, kde-format
msgid "Create Database Folder?"
msgstr ""
#. +> trunk5
#: libs/database/utils/dbsettingswidget.cpp:878
#, kde-format
msgid ""
"<p>The folder to put your database in does not seem to exist:</p>"
"<p><b>%1</b></p>"
"Would you like digiKam to create it for you?"
msgstr ""
#. +> trunk5
#: libs/database/utils/dbsettingswidget.cpp:889
#, kde-format
msgid "Create Database Folder Failed"
msgstr ""
#. +> trunk5
#: libs/database/utils/dbsettingswidget.cpp:890
#, kde-format
msgid ""
"<p>digiKam could not create the folder to host your database file.\n"
"Please select a different location.</p>"
"<p><b>%1</b></p>"
msgstr ""
#. +> trunk5
#: libs/database/utils/dbsettingswidget.cpp:909
#, kde-format
msgid "No Database Write Access"
msgstr ""
#. +> trunk5
#: libs/database/utils/dbsettingswidget.cpp:910
#, kde-format
msgid ""
"<p>You do not seem to have write access for the folder to host the database file.<br/>"
msgid "Set here the gamma adjustment of the image."
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiafilter.h:162
#, kde-format
msgid "Black & White / Sepia Filter"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiasettings.cpp:154
#, kde-format
msgctxt "generic black and white film"
msgid "Generic"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiasettings.cpp:155
#, kde-format
msgid ""
"<b>Generic</b>:"
"<p>Simulate a generic black and white film.</p>"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiasettings.cpp:158
#, kde-format
msgid "Agfa 200X"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiasettings.cpp:159
#, kde-format
msgid ""
"<b>Agfa 200X</b>:"
"<p>Simulate the Agfa 200X black and white film at 200 ISO.</p>"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiasettings.cpp:162
#, kde-format
msgid "Agfa Pan 25"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiasettings.cpp:163
#, kde-format
msgid ""
"<b>Agfa Pan 25</b>:"
"<p>Simulate the Agfa Pan black and white film at 25 ISO.</p>"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiasettings.cpp:166
#, kde-format
msgid "Agfa Pan 100"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiasettings.cpp:167
#, kde-format
msgid ""
"<b>Agfa Pan 100</b>:"
"<p>Simulate the Agfa Pan black and white film at 100 ISO.</p>"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiasettings.cpp:170
#, kde-format
msgid "Agfa Pan 400"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiasettings.cpp:171
#, kde-format
msgid ""
"<b>Agfa Pan 400</b>:"
"<p>Simulate the Agfa Pan black and white film at 400 ISO.</p>"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiasettings.cpp:174
#, kde-format
msgid "Ilford Delta 100"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiasettings.cpp:175
#, kde-format
msgid ""
"<b>Ilford Delta 100</b>:"
"<p>Simulate the Ilford Delta black and white film at 100 ISO.</p>"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiasettings.cpp:178
#, kde-format
msgid "Ilford Delta 400"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiasettings.cpp:179
#, kde-format
msgid ""
"<b>Ilford Delta 400</b>:"
"<p>Simulate the Ilford Delta black and white film at 400 ISO.</p>"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiasettings.cpp:182
#, kde-format
msgid "Ilford Delta 400 Pro 3200"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiasettings.cpp:183
#, kde-format
msgid ""
"<b>Ilford Delta 400 Pro 3200</b>:"
"<p>Simulate the Ilford Delta 400 Pro black and white film at 3200 ISO.</p>"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiasettings.cpp:186
#, kde-format
msgid "Ilford FP4 Plus"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiasettings.cpp:187
#, kde-format
msgid ""
"<b>Ilford FP4 Plus</b>:"
"<p>Simulate the Ilford FP4 Plus black and white film at 125 ISO.</p>"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiasettings.cpp:190
#, kde-format
msgid "Ilford HP5 Plus"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiasettings.cpp:191
#, kde-format
msgid ""
"<b>Ilford HP5 Plus</b>:"
"<p>Simulate the Ilford HP5 Plus black and white film at 400 ISO.</p>"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiasettings.cpp:194
#, kde-format
msgid "Ilford PanF Plus"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiasettings.cpp:195
#, kde-format
msgid ""
"<b>Ilford PanF Plus</b>:"
"<p>Simulate the Ilford PanF Plus black and white film at 50 ISO.</p>"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiasettings.cpp:198
#, kde-format
msgid "Ilford XP2 Super"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiasettings.cpp:199
#, kde-format
msgid ""
"<b>Ilford XP2 Super</b>:"
"<p>Simulate the Ilford XP2 Super black and white film at 400 ISO.</p>"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiasettings.cpp:202
#, kde-format
msgid "Kodak Tmax 100"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiasettings.cpp:203
#, kde-format
msgid ""
"<b>Kodak Tmax 100</b>:"
"<p>Simulate the Kodak Tmax black and white film at 100 ISO.</p>"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiasettings.cpp:206
#, kde-format
msgid "Kodak Tmax 400"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiasettings.cpp:207
#, kde-format
msgid ""
"<b>Kodak Tmax 400</b>:"
"<p>Simulate the Kodak Tmax black and white film at 400 ISO.</p>"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiasettings.cpp:210
#, kde-format
msgid "Kodak TriX"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiasettings.cpp:211
#, kde-format
msgid ""
"<b>Kodak TriX</b>:"
"<p>Simulate the Kodak TriX black and white film at 400 ISO.</p>"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiasettings.cpp:216
#, kde-format
msgid "Ilford SPX 200 (Infrared)"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiasettings.cpp:217
#, kde-format
msgid ""
"<b>Ilford SPX 200</b>:"
"<p>Simulate the Ilford SPX infrared film at 200 ISO.</p>"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiasettings.cpp:220
#, kde-format
msgid "Ilford SPX 400 (Infrared)"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiasettings.cpp:221
#, kde-format
msgid ""
"<b>Ilford SPX 400</b>:"
"<p>Simulate the Ilford SPX infrared film at 400 ISO.</p>"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiasettings.cpp:224
#, kde-format
msgid "Ilford SPX 800 (Infrared)"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiasettings.cpp:225
#, kde-format
msgid ""
"<b>Ilford SPX 800</b>:"
"<p>Simulate the Ilford SPX infrared film at 800 ISO.</p>"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiasettings.cpp:228
#, kde-format
msgid "Kodak HIE (Infrared)"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiasettings.cpp:229
#, kde-format
msgid ""
"<b>Kodak HIE</b>:"
"<p>Simulate the Kodak HIE infrared film.</p>"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiasettings.cpp:238
#, kde-format
msgid "No Lens Filter"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiasettings.cpp:239
#, kde-format
msgid ""
"<b>No Lens Filter</b>:"
"<p>Do not apply a lens filter when rendering the image.</p>"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiasettings.cpp:242
#: libs/dimg/filters/bw/bwsepiasettings.cpp:328
#, kde-format
msgid "Green Filter"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiasettings.cpp:243
#, kde-format
msgid ""
"<b>Black & White with Green Filter</b>:"
"<p>Simulate black and white film exposure using a green filter. This is useful for all scenic shoots, especially portraits photographed against the sky.</p>"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiasettings.cpp:248
#, kde-format
msgid "Orange Filter"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiasettings.cpp:249
#, kde-format
msgid ""
"<b>Black & White with Orange Filter</b>:"
"<p>Simulate black and white film exposure using an orange filter. This will enhance landscapes, marine scenes and aerial photography.</p>"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiasettings.cpp:254
#, kde-format
msgid "Red Filter"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiasettings.cpp:255
#, kde-format
msgid ""
"<b>Black & White with Red Filter</b>:"
"<p>Simulate black and white film exposure using a red filter. This creates dramatic sky effects, and simulates moonlight scenes in the daytime.</p>"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiasettings.cpp:260
#, kde-format
msgid "Yellow Filter"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiasettings.cpp:261
#, kde-format
msgid ""
"<b>Black & White with Yellow Filter</b>:"
"<p>Simulate black and white film exposure using a yellow filter. This has the most natural tonal correction, and improves contrast. Ideal for landscapes.</p>"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiasettings.cpp:266
#, kde-format
msgid "Yellow-Green Filter"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiasettings.cpp:267
#, kde-format
msgid ""
"<b>Black & White with Yellow-Green Filter</b>:"
"<p>Simulate black and white film exposure using a yellow-green filter. A yellow-green filter is highly effective for outdoor portraits because red is rendered dark while green appears lighter. Great for correcting skin tones, bringing out facial expressions in close-ups and emphasizing the feeling of liveliness. This filter is highly effective for indoor portraits under tungsten lighting.</p>"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiasettings.cpp:274
#, kde-format
msgid "Blue Filter"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiasettings.cpp:275
#, kde-format
msgid ""
"<b>Black & White with Blue Filter</b>:"
"<p>Simulate black and white film exposure using a blue filter. This accentuates haze and fog. Used for dye transfer and contrast effects.</p>"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiasettings.cpp:280
#, kde-format
msgid "Strength:"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiasettings.cpp:286
#, kde-format
msgid "Here, set the strength adjustment of the lens filter."
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiasettings.cpp:297
#, kde-format
msgid "No Tone Filter"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiasettings.cpp:298
#, kde-format
msgid ""
"<b>No Tone Filter</b>:"
"<p>Do not apply a tone filter to the image.</p>"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiasettings.cpp:301
#, kde-format
msgid "Sepia Filter"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiasettings.cpp:302
#, kde-format
msgid ""
"<b>Black & White with Sepia Tone</b>:"
"<p>Gives a warm highlight and mid-tone while adding a bit of coolness to the shadows - very similar to the process of bleaching a print and re-developing in a sepia toner.</p>"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiasettings.cpp:307
#, kde-format
msgid "Brown Filter"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiasettings.cpp:308
#, kde-format
msgid ""
"<b>Black & White with Brown Tone</b>:"
"<p>This filter is more neutral than the Sepia Tone filter.</p>"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiasettings.cpp:312
#, kde-format
msgid "Cold Filter"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiasettings.cpp:313
#, kde-format
msgid ""
"<b>Black & White with Cold Tone</b>:"
"<p>Start subtly and replicate printing on a cold tone black and white paper such as a bromide enlarging paper.</p>"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiasettings.cpp:318
#, kde-format
msgid "Selenium Filter"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiasettings.cpp:319
#, kde-format
msgid ""
"<b>Black & White with Selenium Tone</b>:"
"<p>This effect replicates traditional selenium chemical toning done in the darkroom.</p>"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiasettings.cpp:323
#, kde-format
msgid "Platinum Filter"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/bw/bwsepiasettings.cpp:324
#, kde-format
msgid ""
"<b>Black & White with Platinum Tone</b>:"
"<p>This effect replicates traditional platinum chemical toning done in the darkroom.</p>"
msgid "With this button, you can pick the color from original image used to set <b>Shadow Tone</b> smooth curves point on Red, Green, Blue, and Luminosity channels."
msgid "With this button, you can pick the color from original image used to set <b>Middle Tone</b> smooth curves point on Red, Green, Blue, and Luminosity channels."
msgid "With this button, you can pick the color from original image used to set <b>Highlight Tone</b> smooth curves point on Red, Green, Blue, and Luminosity channels."
msgstr ""
#. +> trunk5
#: libs/dimg/filters/curves/curvesbox.cpp:219
#, kde-format
msgid "Reset current channel curves' values."
msgstr ""
#. +> trunk5
#: libs/dimg/filters/curves/curvesbox.cpp:220
#, kde-format
msgid "If you press this button, all curves' values from the currently selected channel will be reset to the default values."
msgid "Enable this option if you want to preserve the aspect ratio of image. If enabled, the border width will be a percentage of the image size, else the border width will be in pixels."
msgid "Total smoothing power: if the Detail Factor sets the relative smoothing and the Anisotropy Factor the direction, the Smoothing Factor sets the overall effect."
msgid "<b>Function</b>: This function combines the original RGB channels with the desaturated blurred image. This function is used in each of the tonemapping stages. It can be linear or power. Basically, this function increases the values where both the original and blurred image's value are low and do the opposite on high values."
msgid "<b>Highlights saturation</b>: Usually the (perceived) saturation is increased. The user can choose to lower the saturation on original highlight and shadows from the image with these parameters."
msgid "<b>Shadow saturation</b>: Usually the (perceived) saturation is increased. The user can choose to lower the saturation on original highlight and shadows from the image with these parameters."
msgid "This value is the radius of the inner circle of the filter. In the inner circle the image is preserved. It is expressed as a multiple of the outer radius of the filter."
msgid "This value is the radius of the outer circle of the filter. Outside the outer circle the effect of the filter is at its maximum. It is expressed as a multiple of the diagonal of the image."
msgid "This is the camera maker description string found in image meta-data. This one is used to query and find relevant camera device information from Lensfun database."
msgid "This is the camera model description string found in image meta-data. This one is used to query and found relevant camera device information from Lensfun database."
msgid "This is the lens description string found in image meta-data. This one is used to query and found relevant lens information from Lensfun database."
msgid "Chromatic aberration is easily recognized as color fringes towards the image corners. CA is due to a varying lens focus for different colors."
msgstr ""
#. +> trunk5
#: libs/dimg/filters/lens/lensfunsettings.cpp:88
#, kde-format
msgid "Vignetting"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/lens/lensfunsettings.cpp:89
#, kde-format
msgid "Vignetting refers to an image darkening, mostly in the corners. Optical and natural vignetting can be canceled out with this option, whereas mechanical vignetting will not be cured."
msgstr ""
#. +> trunk5
#: libs/dimg/filters/lens/lensfunsettings.cpp:92
#, kde-format
msgid "Distortion"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/lens/lensfunsettings.cpp:93
#, kde-format
msgid "Distortion refers to an image deformation, which is most pronounced towards the corners. These Seidel aberrations are known as pincushion and barrel distortions."
msgstr ""
#. +> trunk5
#: libs/dimg/filters/lens/lensfunsettings.cpp:96
#, kde-format
msgid "Geometry"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/lens/lensfunsettings.cpp:97
#, kde-format
msgid "Four geometries are handled here: Rectilinear (99 percent of all lenses), Fisheye, Cylindrical, Equirectangular."
msgstr ""
#. +> trunk5
#: libs/dimg/filters/lens/lensfunsettings.cpp:99
#, kde-format
msgid "<b>Note: lens correction options depend of filters available in LensFun library. See <a href='http://lensfun.sourceforge.net'>LensFun project web site</a> for more information.</b>"
"<p>If the image's maximal counts are small, you can use the <b>linear</b> scale.</p>"
"<p><b>Logarithmic</b> scale can be used when the maximal counts are big; if it is used, all values (small and large) will be visible on the graph.</p>"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/levels/histogrambox.cpp:101
#, kde-format
msgctxt "linear histogram scaling mode"
msgid "Linear"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/levels/histogrambox.cpp:107
#, kde-format
msgctxt "logarithmic histogram scaling mode"
msgid "Logarithmic"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/levels/histogrambox.cpp:124
#, kde-format
msgid "Here you can see the target preview image histogram drawing of the selected image channel. This one is re-computed at any settings changes."
msgstr ""
#. +> trunk5
#: libs/dimg/filters/levels/histogrambox.cpp:269
#, kde-format
msgid "<p>Select the histogram channel to display:</p>"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/levels/histogrambox.cpp:274
#, kde-format
msgctxt "The luminosity channel"
msgid "Luminosity"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/levels/histogrambox.cpp:275
#, kde-format
msgid "<b>Luminosity</b>: display the image's luminosity values."
msgstr ""
#. +> trunk5
#: libs/dimg/filters/levels/histogrambox.cpp:277
#, kde-format
msgctxt "The red channel"
msgid "Red"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/levels/histogrambox.cpp:278
#, kde-format
msgid "<b>Red</b>: display the red image-channel values."
msgstr ""
#. +> trunk5
#: libs/dimg/filters/levels/histogrambox.cpp:280
#, kde-format
msgctxt "The green channel"
msgid "Green"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/levels/histogrambox.cpp:281
#, kde-format
msgid "<b>Green</b>: display the green image-channel values."
msgstr ""
#. +> trunk5
#: libs/dimg/filters/levels/histogrambox.cpp:283
#, kde-format
msgctxt "The blue channel"
msgid "Blue"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/levels/histogrambox.cpp:284
#, kde-format
msgid "<b>Blue</b>: display the blue image-channel values."
msgstr ""
#. +> trunk5
#: libs/dimg/filters/levels/histogrambox.cpp:286
#, kde-format
msgctxt "The colors channel"
msgid "Colors"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/levels/histogrambox.cpp:287
#, kde-format
msgid "<b>Colors</b>: Display all color channel values at the same time."
msgstr ""
#. +> trunk5
#: libs/dimg/filters/levels/histogrambox.cpp:289
#, kde-format
msgctxt "The alpha channel"
msgid "Alpha"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/levels/histogrambox.cpp:290
#, kde-format
msgid "<b>Alpha</b>: display the alpha image-channel values. This channel corresponds to the transparency value and is supported by some image formats, such as PNG or TIF."
msgid "<b>Threshold</b>: Adjusts the threshold for denoising of the image in a range from 0.0 (none) to 10.0. The threshold is the value below which everything is considered noise."
msgstr ""
#. +> trunk5
#: libs/dimg/filters/nr/nrsettings.cpp:119
#, kde-format
msgid "<b>Softness</b>: This adjusts the softness of the thresholding (soft as opposed to hard thresholding). The higher the softness the more noise remains in the image."
msgstr ""
#. +> trunk5
#: libs/dimg/filters/nr/nrsettings.cpp:125
#, kde-format
msgid "Estimate Noise"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/nr/nrsettings.cpp:126
#, kde-format
msgid "Compute automatically all noise reduction settings by a parse of noise contained in image."
msgstr ""
#. +> trunk5
#: libs/dimg/filters/nr/nrsettings.cpp:137
#: libs/dimg/filters/nr/nrsettings.cpp:164
#: libs/dimg/filters/nr/nrsettings.cpp:191
#: libs/dimg/filters/sharp/sharpsettings.cpp:203
#, kde-format
msgid "Threshold:"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/nr/nrsettings.cpp:144
#: libs/dimg/filters/nr/nrsettings.cpp:171
#: libs/dimg/filters/nr/nrsettings.cpp:198
#, kde-format
msgid "Softness:"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/nr/nrsettings.cpp:216
#, kde-format
msgid "Luminance"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/nr/nrsettings.cpp:219
#, kde-format
msgid "Chrominance Blue"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/nr/nrsettings.cpp:222
#, kde-format
msgid "Chrominance Red"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/nr/nrsettings.cpp:374
#, kde-format
msgid "Photograph Noise Reduction Settings File to Load"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/nr/nrsettings.cpp:392
#, kde-format
msgid "\"%1\" is not a Photograph Noise Reduction settings text file."
msgstr ""
#. +> trunk5
#: libs/dimg/filters/nr/nrsettings.cpp:412
#, kde-format
msgid "Cannot load settings from the Photograph Noise Reduction text file."
msgstr ""
#. +> trunk5
#: libs/dimg/filters/nr/nrsettings.cpp:420
#, kde-format
msgid "Photograph Noise Reduction Settings File to Save"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/nr/nrsettings.cpp:445
#, kde-format
msgid "Cannot save settings to the Photograph Noise Reduction text file."
msgid "Select the sharpening method to apply to the image."
msgstr ""
#. +> trunk5
#: libs/dimg/filters/sharp/sharpsettings.cpp:166
#: utilities/metadataedit/exif/exifadjust.cpp:136
#, kde-format
msgid "Sharpness:"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/sharp/sharpsettings.cpp:170
#, kde-format
msgid "A sharpness of 0 has no effect, 1 and above determine the sharpen matrix radius that determines how much to sharpen the image."
msgstr ""
#. +> trunk5
#: libs/dimg/filters/sharp/sharpsettings.cpp:187
#, kde-format
msgid "Radius:"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/sharp/sharpsettings.cpp:192
#, kde-format
msgid "Radius value is the Gaussian blur matrix radius value used to determines how much to blur the image."
msgstr ""
#. +> trunk5
#: libs/dimg/filters/sharp/sharpsettings.cpp:200
#, kde-format
msgid "The value of the difference between the original and the blur image that is added back into the original."
msgstr ""
#. +> trunk5
#: libs/dimg/filters/sharp/sharpsettings.cpp:208
#, kde-format
msgid "The threshold, as a fraction of the maximum luminosity value, needed to apply the difference amount."
msgstr ""
#. +> trunk5
#: libs/dimg/filters/sharp/sharpsettings.cpp:212
#, kde-format
msgid "Suppress color noise."
msgstr ""
#. +> trunk5
#: libs/dimg/filters/sharp/sharpsettings.cpp:214
#, kde-format
msgid "An option to apply filter on luminosity channel only used to suppress chroma noise amplification."
msgstr ""
#. +> trunk5
#: libs/dimg/filters/sharp/sharpsettings.cpp:237
#, kde-format
msgid "Circular sharpness:"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/sharp/sharpsettings.cpp:242
#, kde-format
msgid "This is the radius of the circular convolution. It is the most important parameter for using this plugin. For most images the default value of 1.0 should give good results. Select a higher value when your image is very blurred."
msgstr ""
#. +> trunk5
#: libs/dimg/filters/sharp/sharpsettings.cpp:246
#, kde-format
msgid "Correlation:"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/sharp/sharpsettings.cpp:251
#, kde-format
msgid "Increasing the correlation may help to reduce artifacts. The correlation can range from 0-1. Useful values are 0.5 and values close to 1, e.g. 0.95 and 0.99. Using a high value for the correlation will reduce the sharpening effect of the plugin."
msgstr ""
#. +> trunk5
#: libs/dimg/filters/sharp/sharpsettings.cpp:256
#, kde-format
msgid "Noise filter:"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/sharp/sharpsettings.cpp:261
#, kde-format
msgid "Increasing the noise filter parameter may help to reduce artifacts. The noise filter can range from 0-1 but values higher than 0.1 are rarely helpful. When the noise filter value is too low, e.g. 0.0 the image quality will be very poor. A useful value is 0.01. Using a high value for the noise filter will reduce the sharpening effect of the plugin."
msgstr ""
#. +> trunk5
#: libs/dimg/filters/sharp/sharpsettings.cpp:267
#, kde-format
msgid "Gaussian sharpness:"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/sharp/sharpsettings.cpp:272
#, kde-format
msgid "This is the sharpness for the Gaussian convolution. Use this parameter when your blurring is of a Gaussian type. In most cases you should set this parameter to 0, because it causes nasty artifacts. When you use non-zero values, you will probably also have to increase the correlation and/or noise filter parameters."
msgstr ""
#. +> trunk5
#: libs/dimg/filters/sharp/sharpsettings.cpp:277
#, kde-format
msgid "Matrix size:"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/sharp/sharpsettings.cpp:281
#, kde-format
msgid "This parameter determines the size of the transformation matrix. Increasing the matrix width may give better results, especially when you have chosen large values for circular or Gaussian sharpness."
msgstr ""
#. +> trunk5
#: libs/dimg/filters/sharp/sharpsettings.cpp:501
#, kde-format
msgid "Photograph Refocus Settings File to Load"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/sharp/sharpsettings.cpp:519
#, kde-format
msgid "\"%1\" is not a Photograph Refocus settings text file."
msgstr ""
#. +> trunk5
#: libs/dimg/filters/sharp/sharpsettings.cpp:540
#, kde-format
msgid "Cannot load settings from the Photograph Refocus text file."
msgstr ""
#. +> trunk5
#: libs/dimg/filters/sharp/sharpsettings.cpp:548
#, kde-format
msgid "Photograph Refocus Settings File to Save"
msgstr ""
#. +> trunk5
#: libs/dimg/filters/sharp/sharpsettings.cpp:576
#, kde-format
msgid "Cannot save settings to the Photograph Refocus text file."
msgid "<font color='red'><i>Warning: <a href='http://en.wikipedia.org/wiki/JPEG'>JPEG</a> is a lossy image compression format.</i></font>"
msgstr ""
#. +> trunk5
#: libs/dimg/loaders/jpegsettings.cpp:107
#, kde-format
msgid "Chroma subsampling:"
msgstr ""
#. +> trunk5
#: libs/dimg/loaders/jpegsettings.cpp:110
#, kde-format
msgid "4:4:4 (best quality)"
msgstr ""
#. +> trunk5
#: libs/dimg/loaders/jpegsettings.cpp:111
#, kde-format
msgid "4:2:2 (good quality)"
msgstr ""
#. +> trunk5
#: libs/dimg/loaders/jpegsettings.cpp:112
#, kde-format
msgid "4:2:0 (low quality)"
msgstr ""
#. +> trunk5
#: libs/dimg/loaders/jpegsettings.cpp:113
#, kde-format
msgid "4:1:1 (low quality)"
msgstr ""
#. +> trunk5
#: libs/dimg/loaders/jpegsettings.cpp:114
#, kde-format
msgid ""
"<p>Chroma subsampling reduces file size by taking advantage of the eye's lesser sensitivity to color resolution. How perceptible the difference is depends on the image - large photos will generally show no difference, while sharp, down-scaled pixel graphics may lose fine color detail.</p>"
"<p><b>4:4:4</b> - No chroma subsampling, highest quality but lowest compression.</p>"
"<p><b>4:2:2</b> - Chroma halved horizontally, average compression, average quality.</p>"
"<p><b>4:2:0</b> - Chroma quartered in 2x2 blocks, high compression but low quality.</p>"
"<p><b>4:1:1</b> - Chroma quartered in 4x1 blocks, high compression but low quality.</p>"
msgid "The database is not valid: the \"DBFaceVersion\" setting does not exist. The current database schema version cannot be verified. Try to start with an empty database. "
msgid "The database has been used with a more recent version of digiKam and has been updated to a database schema which cannot be used with this version. (This means this digiKam version is too old, or the database format is to recent.) Please use the more recent version of digiKam that you used before."
msgid "Select the file types (MIME types) that you want shown. Note: \"Raster Files\" are formats from raster graphics editors, such as Photoshop, The Gimp, Krita, etc."
msgstr ""
#. +> trunk5
#: libs/filters/ratingfilter.cpp:75
#, kde-format
msgid "Select the rating value used to filter albums' contents. Use the context pop-up menu to set rating filter conditions."
msgstr ""
#. +> trunk5
#: libs/filters/ratingfilter.cpp:173
#, kde-format
msgid "Rating greater than or equal to %1."
msgstr ""
#. +> trunk5
#: libs/filters/ratingfilter.cpp:178
#, kde-format
msgid "Rating equal to %1."
msgstr ""
#. +> trunk5
#: libs/filters/ratingfilter.cpp:183
#, kde-format
msgid "Rating less than or equal to %1."
msgstr ""
#. +> trunk5
#: libs/filters/ratingfilter.cpp:227
#, kde-format
msgid "Rating Filter Options"
msgstr ""
#. +> trunk5
#: libs/filters/ratingfilter.cpp:232
#, kde-format
msgid "Greater Than or Equals Condition"
msgstr ""
#. +> trunk5
#: libs/filters/ratingfilter.cpp:234
#, kde-format
msgid "Equals Condition"
msgstr ""
#. +> trunk5
#: libs/filters/ratingfilter.cpp:236
#, kde-format
msgid "Less Than or Equals Condition"
msgstr ""
#. +> trunk5
#: libs/filters/ratingfilter.cpp:239
#, kde-format
msgid "Exclude Items Without Rating"
msgstr ""
#. +> trunk5
#: libs/filters/textfilter.cpp:81
#, kde-format
msgid "Text quick filter (search)"
msgstr ""
#. +> trunk5
#: libs/filters/textfilter.cpp:82
#, kde-format
msgid "Enter search patterns to quickly filter this view on item names, captions (comments), and tags"
msgstr ""
#. +> trunk5
#: libs/filters/textfilter.cpp:86
#, kde-format
msgid "Text Search Fields"
msgstr ""
#. +> trunk5
#: libs/filters/textfilter.cpp:89
#, kde-format
msgid "Defines which fields to search for the text in."
msgid "Enter the text used to create tags here. '/' can be used to create a hierarchy of tags. ',' can be used to create more than one hierarchy at the same time."
msgid "Enter the Informative Provider Reference here. I.P.R is a name registered with the XMP/NAA, identifying the provider that provides an indicator of the content. The default value for the I.P.R is \"XMP\" if a standard Reference Code is used."
msgstr ""
#. +> trunk5
#: libs/template/subjectedit.cpp:58
#, kde-format
msgid "Enter the Subject Reference Number here. Provides a numeric code to indicate the Subject Name plus optional Subject Matter and Subject Detail Names in the language of the service. Subject Reference is a number from the range 01000000 to 17999999 and represent a language independent international reference to a Subject. A Subject is identified by its Reference Number and corresponding Names taken from a standard lists given by XMP/NAA. If a standard reference code is used, these lists are the English language reference versions. This field is limited to 8 digit code."
msgstr ""
#. +> trunk5
#: libs/template/subjectedit.cpp:71
#, kde-format
msgid "Enter the Subject Name here. English language is used if you selected a standard XMP/NAA reference code."
msgstr ""
#. +> trunk5
#: libs/template/subjectedit.cpp:75
#, kde-format
msgid "Enter the Subject Matter Name here. English language is used if you selected a standard XMP/NAA reference code."
msgstr ""
#. +> trunk5
#: libs/template/subjectedit.cpp:79
#, kde-format
msgid "Enter the Subject Detail Name here. English language is used if you selected a standard XMP/NAA reference code."
msgstr ""
#. +> trunk5
#: libs/template/templatelist.cpp:80
#, kde-format
msgid "Here you can see the metadata template list managed by digiKam."
msgstr ""
#. +> trunk5
#: libs/template/templatelist.cpp:84
#, kde-format
msgid "Authors"
msgstr ""
#. +> trunk5
#: libs/template/templatepanel.cpp:121
#, kde-format
msgid "Author Names:"
msgstr ""
#. +> trunk5
#: libs/template/templatepanel.cpp:124
#, kde-format
msgid "Enter the names of the photograph's creators. Use semi-colons as separator here."
msgstr ""
#. +> trunk5
#: libs/template/templatepanel.cpp:126
#, kde-format
msgid ""
"<p>This field should contain the names of the persons who created the photograph. If it is not appropriate to add the name of the photographer (for example, if the identity of the photographer needs to be protected) the name of a company or organization can also be used. Once saved, this field should not be changed by anyone. "
"<p>To enter more than one name, use <b>semi-colons as separators</b>.</p>"
"<p>With IPTC, this field is limited to 32 ASCII characters.</p>"
msgstr ""
#. +> trunk5
#: libs/template/templatepanel.cpp:135
#, kde-format
msgid "Authors' Positions:"
msgstr ""
#. +> trunk5
#: libs/template/templatepanel.cpp:138
#, kde-format
msgid "Enter the job titles of the authors here."
msgstr ""
#. +> trunk5
#: libs/template/templatepanel.cpp:140
#, kde-format
msgid ""
"<p>This field should contain the job titles of the authors. Examples might include titles such as: Staff Photographer, Freelance Photographer, or Independent Commercial Photographer. Since this is a qualifier for the Author field, the Author field must also be filled out.</p>"
"<p>With IPTC, this field is limited to 32 ASCII characters.</p>"
"<p>(synonymous to Provider): Use the Provider field to identify who is providing the photograph. This does not necessarily have to be the author. If a photographer is working for a news agency such as Reuters or the Associated Press, these organizations could be listed here as they are \"providing\" the image for use by others. If the image is a stock photograph, then the group (agency) involved in supplying the image should be listed here.</p>"
"<p>With IPTC, this field is limited to 32 ASCII characters.</p>"
"In Europe you would use: Copyright {Year} {Copyright owner}, all rights reserved. \n"
"In Japan, for maximum protection, the following three items should appear in the copyright field of the IPTC Core: (a) the word, Copyright; (b) year of the first publication; and (c) name of the author. You may also wish to include the phrase \"all rights reserved\".</p>"
"<p>With XMP, you can include more than one copyright string using different languages.</p>"
"<p>With IPTC, this field is limited to 128 ASCII characters.</p>"
msgstr ""
#. +> trunk5
#: libs/template/templatepanel.cpp:186
#, kde-format
msgid "Right Usage Terms:"
msgstr ""
#. +> trunk5
#: libs/template/templatepanel.cpp:188
#, kde-format
msgid "Enter the list of instructions on how a resource can be legally used here."
msgstr ""
#. +> trunk5
#: libs/template/templatepanel.cpp:189
#, kde-format
msgid ""
"<p>The Right Usage Terms field should be used to list instructions on how a resource can be legally used."
"<p>With XMP, you can include more than one right usage terms string using different languages.</p>"
msgid "Enter the original owner of the photograph here."
msgstr ""
#. +> trunk5
#: libs/template/templatepanel.cpp:202
#, kde-format
msgid ""
"<p>The Source field should be used to identify the original owner or copyright holder of the photograph. The value of this field should never be changed after the information is entered following the image's creation. While not yet enforced by the custom panels, you should consider this to be a \"write-once\" field. The source could be an individual, an agency, or a member of an agency. To aid in later searches, it is suggested to separate any slashes \"/\" with a blank space. Use the form \"photographer / agency\" rather than \"photographer/agency.\" Source may also be different from Creator and from the names listed in the Copyright Notice.</p>"
"<p>With IPTC, this field is limited to 32 ASCII characters.</p>"
msgid "Minimal version number required for this binary is %1"
msgstr ""
#. +> trunk5
#: libs/widgets/files/dbinarysearch.cpp:104
#, kde-format
msgid "Find"
msgstr ""
#. +> trunk5
#: libs/widgets/files/dbinarysearch.cpp:106
#, kde-format
msgid " or <a href=\"%1\">download</a>"
msgstr ""
#. +> trunk5
#: libs/widgets/files/dbinarysearch.cpp:131
#, kde-format
msgid ""
"<qt>"
"<p><font color=\"red\"><b>Warning:</b> Some necessary binaries have not been found on your system. If you have these binaries installed, please click the 'Find' button to locate them on your system, otherwise please download and install them to proceed.</font></p>"
"</qt>"
msgstr ""
#. +> trunk5
#: libs/widgets/files/dbinarysearch.cpp:165
#, kde-format
msgid "A development version has been detect. There is no guarantee on the behavior of this binary."
msgstr ""
#. +> trunk5
#: libs/widgets/files/dbinarysearch.cpp:171
#, kde-format
msgid "Change"
msgstr ""
#. +> trunk5
#: libs/widgets/files/dfileselector.cpp:63
#, kde-format
msgid "Browse..."
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:256
#, kde-format
msgctxt "@option:check"
msgid "16 bits color depth"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:257
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<para>If enabled, all RAW files will be decoded in 16-bit color depth using a linear gamma curve. To prevent dark picture rendering in the editor, it is recommended to use Color Management in this mode.</para>"
"<para>If disabled, all RAW files will be decoded in 8-bit color depth with a BT.709 gamma curve and a 99th-percentile white point. This mode is faster than 16-bit decoding.</para>"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:276
#, kde-format
msgctxt "@option:check"
msgid "Interpolate RGB as four colors"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:277
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Interpolate RGB as four colors</title>"
"<para>The default is to assume that all green pixels are the same. If even-row green pixels are more sensitive to ultraviolet light than odd-row this difference causes a mesh pattern in the output; using this option solves this problem with minimal loss of detail.</para>"
"<para>To resume, this option blurs the image a little, but it eliminates false 2x2 mesh patterns with VNG quality method or mazes with AHD quality method.</para>"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:291
#, kde-format
msgctxt "@info:tooltip"
msgid "Visit LibRaw project website"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:301
#, kde-format
msgctxt "@option:check"
msgid "Do not stretch or rotate pixels"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:303
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Do not stretch or rotate pixels</title>"
"<para>For Fuji Super CCD cameras, show the image tilted 45 degrees. For cameras with non-square pixels, do not stretch the image to its correct aspect ratio. In any case, this option guarantees that each output pixel corresponds to one RAW pixel.</para>"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:311
#, kde-format
msgctxt "@label:listbox"
msgid "Quality:"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:315
#, kde-format
msgctxt "@item:inlistbox Quality"
msgid "Bilinear"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:316
#, kde-format
msgctxt "@item:inlistbox Quality"
msgid "VNG"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:317
#, kde-format
msgctxt "@item:inlistbox Quality"
msgid "PPG"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:318
#, kde-format
msgctxt "@item:inlistbox Quality"
msgid "AHD"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:321
#, kde-format
msgctxt "@item:inlistbox Quality"
msgid "DCB"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:322
#, kde-format
msgctxt "@item:inlistbox Quality"
msgid "AHD v2"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:323
#, kde-format
msgctxt "@item:inlistbox Quality"
msgid "AFD"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:324
#, kde-format
msgctxt "@item:inlistbox Quality"
msgid "VCD"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:325
#, kde-format
msgctxt "@item:inlistbox Quality"
msgid "VCD & AHD"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:326
#, kde-format
msgctxt "@item:inlistbox Quality"
msgid "LMMSE"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:328
#, kde-format
msgctxt "@item:inlistbox Quality"
msgid "AMaZE"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:332
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Quality (interpolation)</title>"
"<para>Select here the demosaicing method to use when decoding RAW images. A demosaicing algorithm is a digital image process used to interpolate a complete image from the partial raw data received from the color-filtered image sensor, internal to many digital cameras, in form of a matrix of colored pixels. Also known as CFA interpolation or color reconstruction, another common spelling is demosaicing. The following methods are available for demosaicing RAW images:</para>"
"<para>"
"<list>"
"<item><emphasis strong='true'>Bilinear</emphasis>: use high-speed but low-quality bilinear interpolation (default - for slow computers). In this method, the red value of a non-red pixel is computed as the average of the adjacent red pixels, and similarly for blue and green.</item>"
"<item><emphasis strong='true'>VNG</emphasis>: use Variable Number of Gradients interpolation. This method computes gradients near the pixel of interest and uses the lower gradients (representing smoother and more similar parts of the image) to make an estimate.</item>"
"<item><emphasis strong='true'>PPG</emphasis>: use Patterned-Pixel-Grouping interpolation. Pixel Grouping uses assumptions about natural scenery in making estimates. It has fewer color artifacts on natural images than the Variable Number of Gradients method.</item>"
"<item><emphasis strong='true'>AHD</emphasis>: use Adaptive Homogeneity-Directed interpolation. This method selects the direction of interpolation so as to maximize a homogeneity metric, thus typically minimizing color artifacts.</item>"
"<item><emphasis strong='true'>DCB</emphasis>: DCB interpolation from linuxphoto.org project.</item>"
"<item><emphasis strong='true'>AHD v2</emphasis>: modified AHD interpolation using Variance of Color Differences method.</item>"
"<item><emphasis strong='true'>AFD</emphasis>: Adaptive Filtered Demosaicing interpolation through 5 pass median filter from PerfectRaw project.</item>"
"<item><emphasis strong='true'>VCD</emphasis>: Variance of Color Differences interpolation.</item>"
"<item><emphasis strong='true'>VCD & AHD</emphasis>: Mixed demosaicing between VCD and AHD.</item>"
"<item><emphasis strong='true'>LMMSE</emphasis>: color demosaicing via directional linear minimum mean-square error estimation interpolation from PerfectRaw.</item>"
"<item><emphasis strong='true'>AMaZE</emphasis>: Aliasing Minimization interpolation and Zipper Elimination to apply color aberration removal from RawTherapee project.</item>"
"</list>"
"</para>"
"<para>Note: some methods can be unavailable if RAW decoder have been built without extension packs.</para>"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:401
#, kde-format
msgctxt "@label:slider"
msgid "Pass:"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:402
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Pass</title>"
"<para>Set here the passes used by the median filter applied after interpolation to Red-Green and Blue-Green channels.</para>"
"<para>This setting is only available for specific Quality options: <emphasis strong='true'>Bilinear</emphasis>, <emphasis strong='true'>VNG</emphasis>, <emphasis strong='true'>PPG</emphasis>, <emphasis strong='true'>AHD</emphasis>, <emphasis strong='true'>DCB</emphasis>, and <emphasis strong='true'>VCD & AHD</emphasis>.</para>"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:414
#, kde-format
msgctxt "@option:check"
msgid "Refine interpolation"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:415
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Refine interpolation</title>"
"<para>This setting is available only for few Quality options:</para>"
"<para>"
"<list>"
"<item><emphasis strong='true'>DCB</emphasis>: turn on the enhance interpolated colors filter.</item>"
"<item><emphasis strong='true'>VCD & AHD</emphasis>: turn on the enhanced effective color interpolation (EECI) refine to improve sharpness.</item>"
"</list>"
"</para>"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:428
#, kde-format
msgctxt "@label"
msgid "Demosaicing"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:436
#, kde-format
msgctxt "@label:listbox"
msgid "Method:"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:438
#, kde-format
msgctxt "@item:inlistbox"
msgid "Default D65"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:439
#, kde-format
msgctxt "@item:inlistbox"
msgid "Camera"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:440
#, kde-format
msgctxt "@item:inlistbox set while balance automatically"
msgid "Automatic"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:441
#, kde-format
msgctxt "@item:inlistbox set white balance manually"
msgid "Manual"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:443
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>White Balance</title>"
"<para>Configure the raw white balance:</para>"
"<para>"
"<list>"
"<item><emphasis strong='true'>Default D65</emphasis>: Use a standard daylight D65 white balance.</item>"
"<item><emphasis strong='true'>Camera</emphasis>: Use the white balance specified by the camera. If not available, reverts to default neutral white balance.</item>"
"<item><emphasis strong='true'>Automatic</emphasis>: Calculates an automatic white balance averaging the entire image.</item>"
"<item><emphasis strong='true'>Manual</emphasis>: Set a custom temperature and green level values.</item>"
"</list>"
"</para>"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:458
#, kde-format
msgctxt "@label:slider"
msgid "T(K):"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:459
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Temperature</title>"
"<para>Set here the color temperature in Kelvin.</para>"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:466
#, kde-format
msgctxt "@label:slider Green component"
msgid "Green:"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:467
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid "<para>Set here the green component to set magenta color cast removal level.</para>"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:470
#, kde-format
msgctxt "@label:listbox"
msgid "Highlights:"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:472
#, kde-format
msgctxt "@item:inlistbox"
msgid "Solid white"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:473
#, kde-format
msgctxt "@item:inlistbox"
msgid "Unclip"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:474
#, kde-format
msgctxt "@item:inlistbox"
msgid "Blend"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:475
#, kde-format
msgctxt "@item:inlistbox"
msgid "Rebuild"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:477
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Highlights</title>"
"<para>Select here the highlight clipping method:</para>"
"<para>"
"<list>"
"<item><emphasis strong='true'>Solid white</emphasis>: clip all highlights to solid white</item>"
"<item><emphasis strong='true'>Unclip</emphasis>: leave highlights unclipped in various shades of pink</item>"
"<item><emphasis strong='true'>Blend</emphasis>:Blend clipped and unclipped values together for a gradual fade to white</item>"
"<item><emphasis strong='true'>Rebuild</emphasis>: reconstruct highlights using a level value</item>"
"<para>Specify the reconstruct highlight level. Low values favor whites and high values favor colors.</para>"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:496
#, kde-format
msgctxt "@option:check"
msgid "Exposure Correction (E.V)"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:497
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid "<para>Turn on the exposure correction before interpolation.</para>"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:500
#, kde-format
msgctxt "@label:slider"
msgid "Linear Shift:"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:505
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Shift</title>"
"<para>Linear Shift of exposure correction before interpolation in E.V</para>"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:508
#, kde-format
msgctxt "@label:slider"
msgid "Highlight:"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:513
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Highlight</title>"
"<para>Amount of highlight preservation for exposure correction before interpolation in E.V. Only take effect if Shift Correction is > 1.0 E.V</para>"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:517
#, kde-format
msgctxt "@option:check"
msgid "Correct false colors in highlights"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:518
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid "<para>If enabled, images with overblown channels are processed much more accurately, without 'pink clouds' (and blue highlights under tungsten lamps).</para>"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:522
#, kde-format
msgctxt "@option:check"
msgid "Auto Brightness"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:523
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid "<para>If disable, use a fixed white level and ignore the image histogram to adjust brightness.</para>"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:526
#, kde-format
msgctxt "@label:slider"
msgid "Brightness:"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:531
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Brightness</title>"
"<para>Specify the brightness level of output image. The default value is 1.0 (works in 8-bit mode only).</para>"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:541
#, kde-format
msgctxt "@option:check Black point"
msgid "Black:"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:542
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Black point</title>"
"<para>Use a specific black point value to decode RAW pictures. If you set this option to off, the Black Point value will be automatically computed.</para>"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:549
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Black point value</title>"
"<para>Specify specific black point value of the output image.</para>"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:552
#, kde-format
msgctxt "@option:check White point"
msgid "White:"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:553
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>White point</title>"
"<para>Use a specific white point value to decode RAW pictures. If you set this option to off, the White Point value will be automatically computed.</para>"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:560
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>White point value</title>"
"<para>Specify specific white point value of the output image.</para>"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:599
#, kde-format
msgctxt "@label"
msgid "White Balance"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:607
#, kde-format
msgctxt "@label:listbox"
msgid "Noise reduction:"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:609
#, kde-format
msgctxt "@item:inlistbox Noise Reduction"
msgid "None"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:610
#, kde-format
msgctxt "@item:inlistbox Noise Reduction"
msgid "Wavelets"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:611
#, kde-format
msgctxt "@item:inlistbox Noise Reduction"
msgid "FBDD"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:612
#, kde-format
msgctxt "@item:inlistbox Noise Reduction"
msgid "CFA Line Denoise"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:613
#, kde-format
msgctxt "@item:inlistbox Noise Reduction"
msgid "Impulse Denoise"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:615
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Noise Reduction</title>"
"<para>Select here the noise reduction method to apply during RAW decoding.</para>"
"<para>"
"<list>"
"<item><emphasis strong='true'>None</emphasis>: no noise reduction.</item>"
"<item><emphasis strong='true'>Wavelets</emphasis>: wavelets correction to erase noise while preserving real detail. It's applied after interpolation.</item>"
"<item><emphasis strong='true'>FBDD</emphasis>: Fake Before Demosaicing Denoising noise reduction. It's applied before interpolation.</item>"
"<item><emphasis strong='true'>CFA Line Denoise</emphasis>: Banding noise suppression. It's applied after interpolation.</item>"
"<item><emphasis strong='true'>Impulse Denoise</emphasis>: Impulse noise suppression. It's applied after interpolation.</item>"
"<para>If this option is turned on, it will try to shift image channels slightly and evaluate Chromatic Aberration change. Note that if you shot blue-red pattern, the method may fail. In this case, disable this option and tune manually color factors.</para>"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:655
#, kde-format
msgctxt "@label:slider"
msgid "Red-Green:"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:660
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Red-Green multiplier</title>"
"<para>Set here the amount of correction on red-green axis</para>"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:663
#, kde-format
msgctxt "@label:slider"
msgid "Blue-Yellow:"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:668
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Blue-Yellow multiplier</title>"
"<para>Set here the amount of correction on blue-yellow axis</para>"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:687
#, kde-format
msgctxt "@label"
msgid "Corrections"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:695
#, kde-format
msgctxt "@label:listbox"
msgid "Camera Profile:"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:697
#, kde-format
msgctxt "@item:inlistbox Camera Profile"
msgid "None"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:698
#, kde-format
msgctxt "@item:inlistbox Camera Profile"
msgid "Embedded"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:699
#, kde-format
msgctxt "@item:inlistbox Camera Profile"
msgid "Custom"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:701
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Camera Profile</title>"
"<para>Select here the input color space used to decode RAW data.</para>"
"<para>"
"<list>"
"<item><emphasis strong='true'>None</emphasis>: no input color profile is used during RAW decoding.</item>"
"<item><emphasis strong='true'>Embedded</emphasis>: use embedded color profile from RAW file, if it exists.</item>"
"<item><emphasis strong='true'>Custom</emphasis>: use a custom input color space profile.</item>"
"</list>"
"</para>"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:712
#: libs/widgets/files/drawdecoderwidget.cpp:746
#, kde-format
msgid "ICC Files (*.icc *.icm)"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:714
#, kde-format
msgctxt "@label:listbox"
msgid "Workspace:"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:716
#, kde-format
msgctxt "@item:inlistbox Workspace"
msgid "Raw (no profile)"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:717
#, kde-format
msgctxt "@item:inlistbox Workspace"
msgid "sRGB"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:718
#, kde-format
msgctxt "@item:inlistbox Workspace"
msgid "Adobe RGB"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:719
#, kde-format
msgctxt "@item:inlistbox Workspace"
msgid "Wide Gamut"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:720
#, kde-format
msgctxt "@item:inlistbox Workspace"
msgid "Pro-Photo"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:721
#, kde-format
msgctxt "@item:inlistbox Workspace"
msgid "Custom"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:723
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Workspace</title>"
"<para>Select here the output color space used to decode RAW data.</para>"
"<para>"
"<list>"
"<item><emphasis strong='true'>Raw (linear)</emphasis>: in this mode, no output color space is used during RAW decoding.</item>"
"<item><emphasis strong='true'>sRGB</emphasis>: this is an RGB color space, created cooperatively by Hewlett-Packard and Microsoft. It is the best choice for images destined for the Web and portrait photography.</item>"
"<item><emphasis strong='true'>Adobe RGB</emphasis>: this color space is an extended RGB color space, developed by Adobe. It is used for photography applications such as advertising and fine art.</item>"
"<item><emphasis strong='true'>Wide Gamut</emphasis>: this color space is an expanded version of the Adobe RGB color space.</item>"
"<item><emphasis strong='true'>Pro-Photo</emphasis>: this color space is an RGB color space, developed by Kodak, that offers an especially large gamut designed for use with photographic outputs in mind.</item>"
"<item><emphasis strong='true'>Custom</emphasis>: use a custom output color space profile.</item>"
"</list>"
"</para>"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:758
#, kde-format
msgctxt "@label"
msgid "Color Management"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:968
#, kde-format
msgctxt "@label"
msgid "Threshold:"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:969
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Threshold</title>"
"<para>Set here the noise reduction threshold value to use.</para>"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:982
#, kde-format
msgctxt "@label"
msgid "Luminance:"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:983
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Luminance</title>"
"<para>Amount of Luminance impulse noise reduction.</para>"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:985
#, kde-format
msgctxt "@label"
msgid "Chrominance:"
msgstr ""
#. +> trunk5
#: libs/widgets/files/drawdecoderwidget.cpp:986
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Chrominance</title>"
"<para>Amount of Chrominance impulse noise reduction.</para>"
msgid "Enable this checkbox to change the font family settings."
msgstr ""
#. +> trunk5
#: libs/widgets/fonts/dfontproperties.cpp:280
#, kde-format
msgid "Change font family?"
msgstr ""
#. +> trunk5
#: libs/widgets/fonts/dfontproperties.cpp:286
#, kde-format
msgctxt "@label"
msgid "Font:"
msgstr ""
#. +> trunk5
#: libs/widgets/fonts/dfontproperties.cpp:296
#, kde-format
msgid "Font style"
msgstr ""
#. +> trunk5
#: libs/widgets/fonts/dfontproperties.cpp:302
#, kde-format
msgid "Enable this checkbox to change the font style settings."
msgstr ""
#. +> trunk5
#: libs/widgets/fonts/dfontproperties.cpp:303
#, kde-format
msgid "Change font style?"
msgstr ""
#. +> trunk5
#: libs/widgets/fonts/dfontproperties.cpp:309
#, kde-format
msgid "Font style:"
msgstr ""
#. +> trunk5
#: libs/widgets/fonts/dfontproperties.cpp:326
#, kde-format
msgid "Enable this checkbox to change the font size settings."
msgstr ""
#. +> trunk5
#: libs/widgets/fonts/dfontproperties.cpp:327
#, kde-format
msgid "Change font size?"
msgstr ""
#. +> trunk5
#: libs/widgets/fonts/dfontproperties.cpp:333
#, kde-format
msgctxt "@label:listbox Font size"
msgid "Size:"
msgstr ""
#. +> trunk5
#: libs/widgets/fonts/dfontproperties.cpp:348
#, kde-format
msgid "Here you can choose the font family to be used."
msgstr ""
#. +> trunk5
#: libs/widgets/fonts/dfontproperties.cpp:378
#, kde-format
msgid "Here you can choose the font style to be used."
msgstr ""
#. +> trunk5
#: libs/widgets/fonts/dfontproperties.cpp:391
#: libs/widgets/fonts/dfontproperties.cpp:719
#: libs/widgets/fonts/dfontproperties.cpp:757
#, kde-format
msgid "Normal"
msgstr ""
#. +> trunk5
#: libs/widgets/fonts/dfontproperties.cpp:392
#: libs/widgets/fonts/dfontproperties.cpp:763
#, kde-format
msgid "Italic"
msgstr ""
#. +> trunk5
#: libs/widgets/fonts/dfontproperties.cpp:393
#: libs/widgets/fonts/dfontproperties.cpp:764
#, kde-format
msgid "Oblique"
msgstr ""
#. +> trunk5
#: libs/widgets/fonts/dfontproperties.cpp:394
#, kde-format
msgid "Bold"
msgstr ""
#. +> trunk5
#: libs/widgets/fonts/dfontproperties.cpp:395
#, kde-format
msgid "Bold Italic"
msgstr ""
#. +> trunk5
#: libs/widgets/fonts/dfontproperties.cpp:414
#, kde-format
msgid "Relative"
msgstr ""
#. +> trunk5
#: libs/widgets/fonts/dfontproperties.cpp:415
#, kde-format
msgid ""
"Font size<br />"
"<i>fixed</i> or <i>relative</i><br />"
"to environment"
msgstr ""
#. +> trunk5
#: libs/widgets/fonts/dfontproperties.cpp:416
#, kde-format
msgid "Here you can switch between fixed font size and font size to be calculated dynamically and adjusted to changing environment (e.g. widget dimensions, paper size)."
msgstr ""
#. +> trunk5
#: libs/widgets/fonts/dfontproperties.cpp:441
#, kde-format
msgid "Here you can choose the font size to be used."
msgstr ""
#. +> trunk5
#: libs/widgets/fonts/dfontproperties.cpp:479
#, kde-format
msgid "The Quick Brown Fox Jumps Over The Lazy Dog"
msgstr ""
#. +> trunk5
#: libs/widgets/fonts/dfontproperties.cpp:481
#, kde-format
msgid "This sample text illustrates the current settings. You may edit it to test special characters."
"<p><b>Perceptual intent</b> causes the full gamut of the image to be compressed or expanded to fill the gamut of the destination device, so that gray balance is preserved but colorimetric accuracy may not be preserved.</p>"
"<p>In other words, if certain colors in an image fall outside of the range of colors that the output device can render, the image intent will cause all the colors in the image to be adjusted so that the every color in the image falls within the range that can be rendered and so that the relationship between colors is preserved as much as possible.</p>"
"<p>This intent is most suitable for display of photographs and images, and is the default intent.</p>"
"</li>"
"<li>"
"<p><b>Absolute Colorimetric intent</b> causes any colors that fall outside the range that the output device can render to be adjusted to the closest color that can be rendered, while all other colors are left unchanged.</p>"
"<p>This intent preserves the white point and is most suitable for spot colors (Pantone, TruMatch, logo colors, ....)</p>"
"</li>"
"<li>"
"<p><b>Relative Colorimetric intent</b> is defined such that any colors that fall outside the range that the output device can render are adjusted to the closest color that can be rendered, while all other colors are left unchanged. Proof intent does not preserve the white point.</p>"
"</li>"
"<li>"
"<p><b>Saturation intent</b> preserves the saturation of colors in the image at the possible expense of hue and lightness.</p>"
"<p>Implementation of this intent remains somewhat problematic, and the ICC is still working on methods to achieve the desired effects.</p>"
"<p>This intent is most suitable for business graphics such as charts, where it is more important that the colors be vivid and contrast well with each other rather than a specific color.</p>"
"<p>This area contains a CIE or chromaticity diagram. A CIE diagram is a representation of all the colors that a person with normal vision can see. This is represented by the colored sail-shaped area. In addition you will see a triangle that is superimposed on the diagram outlined in white. This triangle represents the outer boundaries of the color space of the device that is characterized by the inspected profile. This is called the device gamut.</p>"
"<p>In addition there are black dots and yellow lines on the diagram. Each black dot represents one of the measurement points that were used to create this profile. The yellow line represents the amount that each point is corrected by the profile, and the direction of this correction.</p>"
"<p>The ICC profile path seems to be invalid.</p>"
"<p>If you want to set it now, select \"Yes\", otherwise select \"No\". In this case, \"Color Management\" feature will be disabled until you solve this issue</p>"
msgstr ""
#. +> trunk5
#: showfoto/main/showfoto.cpp:417
#, kde-format
msgid "Open folder"
msgstr ""
#. +> trunk5
#: showfoto/main/showfoto.cpp:488
#, kde-format
msgid "Delete File"
msgstr ""
#. +> trunk5
#: showfoto/main/showfoto.cpp:592
#, kde-format
msgid "Error Loading File"
msgstr ""
#. +> trunk5
#: showfoto/main/showfoto.cpp:593
#, kde-format
msgid ""
"Failed to load file: %1\n"
"Remote file handling is not supported"
msgstr ""
#. +> trunk5
#: showfoto/main/showfoto.cpp:632
#, kde-format
msgctxt "unknown image dimensions"
msgid "Unknown"
msgstr ""
#. +> trunk5
#: showfoto/main/showfoto.cpp:715
#: utilities/imageeditor/main/imagewindow.cpp:899
#, kde-format
msgctxt "<Image file name> (<Image number> of <Images in album>)"
"<i>Customize behavior of the other parts of Showfoto</i></qt>"
msgstr ""
#. +> trunk5
#: showfoto/setup/showfotosetupmetadata.cpp:93
#: utilities/setup/metadata/setupmetadata.cpp:406
#, kde-format
msgctxt "@label"
msgid "Rotate actions"
msgstr ""
#. +> trunk5
#: showfoto/setup/showfotosetupmetadata.cpp:98
#: utilities/setup/metadata/setupmetadata.cpp:411
#, kde-format
msgid "Show images/thumbnails &rotated according to orientation tag."
msgstr ""
#. +> trunk5
#: showfoto/setup/showfotosetupmetadata.cpp:100
#: utilities/setup/metadata/setupmetadata.cpp:413
#, kde-format
msgid "Set orientation tag to normal after rotate/flip."
msgstr ""
#. +> trunk5
#: showfoto/setup/showfotosetupmetadata.cpp:118
#: utilities/setup/metadata/setupmetadata.cpp:290
#, kde-format
msgid "Visit Exiv2 project website"
msgstr ""
#. +> trunk5
#: showfoto/setup/showfotosetupmetadata.cpp:125
#: utilities/setup/metadata/setupmetadata.cpp:297
#, kde-format
msgid "<p><a href='http://en.wikipedia.org/wiki/Exif'>EXIF</a> - a standard used by most digital cameras today to store technical information (like aperture and shutter speed) about an image.</p>"
msgstr ""
#. +> trunk5
#: showfoto/setup/showfotosetupmetadata.cpp:129
#: utilities/setup/metadata/setupmetadata.cpp:301
#, kde-format
msgid "<p><a href='http://en.wikipedia.org/wiki/IPTC_Information_Interchange_Model'>IPTC</a> - an older standard used in digital photography to store photographer information in images.</p>"
msgstr ""
#. +> trunk5
#: showfoto/setup/showfotosetupmetadata.cpp:135
#: utilities/setup/metadata/setupmetadata.cpp:306
#, kde-format
msgid "<p><a href='http://en.wikipedia.org/wiki/Extensible_Metadata_Platform'>XMP</a> - a new standard used in digital photography, designed to replace IPTC.</p>"
msgid "This list shows the results for your renaming pattern. Red items indicate a name collision, either because the new name is equal to the current name, or because the name has already been assigned to another item."
msgid "<p>Enter your renaming pattern here. Use the access buttons to quickly add renaming options and modifiers. For further explanation, use the information button.</p>"
msgid "<p>Add a modifier to a renaming option. To activate this button, place the cursor behind a renaming option or an already assigned modifier.</p>"
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">You can download a calendar for your country from <a href=\"http://www.icalshare.com\"><span style=\" text-decoration: underline; color:#0057ae;\">http://www.icalshare.com</span></a> or other sites.</p>"
"\n"
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">This is fully optional. All the events from this calendar will be printed in red.</p>"
"<p>This assistant will guide you to create and print a calendar with a selection of images taken from your collection.</p>"
"<p>This tool will also permit to set specific dates on your calendar using external data event files as <a href='http://en.wikipedia.org/wiki/VCalendar'>vCalendar</a>, and <a href='http://en.wikipedia.org/wiki/Icalendar'>iCalendar</a> formats.</p>"
msgid "Set automatic level selection (maximized) for pyramid blending, i.e. optimise image features (contrast, saturation, . . .) to be as global as possible."
msgid "Set the number of levels for pyramid blending. Balances towards local features (small number) or global features (high number). Additionally, a low number trades off quality of results for faster execution time and lower memory usage."
msgid "Force hard blend masks without averaging on finest scale. This is only useful for focus stacks with thin and high contrast features. It improves sharpness at the expense of increased noise."
msgid "Sets the relative weight of high-contrast pixels. Increasing this weight makes pixels with neighboring differently colored pixels contribute more to the final output. Particularly useful for focus stacks."
msgid "Use Color Appearance Modelling (CIECAM02) to render detailed colors. Your input files should have embedded ICC profiles. If no ICC profile is present, sRGB color space will be assumed. The difference between using this option and default color blending algorithm is very slight, and will be most noticeable when you need to blend areas of different primary colors together."
"<p>This tool fuses bracketed images with different exposure to make pseudo <a href='http://en.wikipedia.org/wiki/High_dynamic_range_imaging'>HDR image</a>.</p>"
"<p>It can also be used to <a href='https://en.wikipedia.org/wiki/Focus_stacking'>merge focus bracketed stack</a> to get a single image with increased depth of field.</p>"
"<p>This assistant will help you to configure how to import images before merging them to a single one.</p>"
"<p>Bracketed images must be taken with the same camera, in the same conditions, and if possible using a tripod.</p>"
"<p>For more information, please take a look at <a href='http://en.wikipedia.org/wiki/Bracketing'>this page</a></p>"
"<p>Now, we will pre-process bracketed images before fusing them.</p>"
"<p>To perform auto-alignment, the <b>%1</b> program from the <a href='%2'>%3</a> project will be used. Alignment must be performed if you have not used a tripod to take bracketed images. Alignment operations can take a while.</p>"
"<p>Pre-processing operations include Raw demosaicing. Raw images will be converted to 16-bit sRGB images with auto-gamma.</p>"
msgid "<p><i>Note:</i> removable media (such as USB drives or DVDs) and remote file systems (such as NFS, or Samba mounted with cifs/smbfs) are supported.</p>"
"<p>Set here if you want to store the information assigned to items in digiKam in the files' metadata, to improve interoperability with other photo management programs:</p>"
"<h1><b>Migrate configuration and metadata from digiKam 4</b></h1>"
"</p>"
"<p>You can choose here if you want to use the configuration and albums from digiKam 4 in digiKam 5. Please note the following warnings:</p>"
"<p>Migration is done <b>at your own risk</b>. Digikam developers don't recommend it and don't support it. On the other hand, creating a new configuration might result in loss of tags and other metadata that wasn't embedded inside the pictures and was only available in digiKam 4's database.</p>"
"<p>In either case you're recommended to backup the configuration files and databases before proceeding.</p>"
"<p><i>Note:</i> using a preview is always faster than using the editor, especially when checking a series of shots. However, you cannot change or fix the image in preview mode. Note that if you want to compare images quickly, it is often better to use the light table: images can be displayed side-by-side, and synchronized zooming and panning can be performed.</p>"
"<p><i>Note:</i> loading a reduced version of an image is faster but can differ from the original, especially with Raw. In this case, a JPEG version of Raw pre-processed by camera is loaded, instead of the real image data. This JPEG image is embedded in the file metadata and is used by the camera to display a Raw image faster to a TV screen.</p>"
"</qt>"
msgstr ""
#. +> trunk5
#: utilities/assistants/firstrun/rawpage.cpp:66
#, kde-format
msgid "<b>Configure Raw File Handling</b>"
msgstr ""
#. +> trunk5
#: utilities/assistants/firstrun/rawpage.cpp:74
#, kde-format
msgid ""
"<qt>"
"<p>Set here how you want to open Raw images in the editor:</p>"
"</qt>"
msgstr ""
#. +> trunk5
#: utilities/assistants/firstrun/rawpage.cpp:83
#, kde-format
msgid "Open directly, with adjustments made automatically"
msgstr ""
#. +> trunk5
#: utilities/assistants/firstrun/rawpage.cpp:88
#, kde-format
msgid "Use the Raw import tool to adjust corrections manually"
msgstr ""
#. +> trunk5
#: utilities/assistants/firstrun/rawpage.cpp:98
#, kde-format
msgid ""
"<qt>"
"<p><i>Note:</i> the Raw import tool is designed for advanced users who want to have the best control over the image. This requires more time in your workflow.</p>"
"<p>Congratulations. Your minimal setup is done.</p>"
"<p>Remember, you can customize more settings using the digiKam configuration panel. To learn more about the digiKam world, we recommend reading the <b>digiKam handbook</b> using the <b>Help/Handbook</b> menu entry (you need to install the separate digiKam documentation package.) You can also read the manual online from the <a href='http://www.digikam.org/docs'>digikam.org website</a>.</p>"
"<p>Press <b>Finish</b> to close this assistant. digiKam will scan your collection to register all albums in the database. Items including in albums are collected after startup stage in background.</p>"
"<p><i>Note:</i> depending on your collection size, this operation can take a while. If you cancel the scanning operation, it will start again in the next digiKam session.</p>"
"<p>When scanning has completed, at next start-up, digiKam will only check your collection to identify new albums - which is much faster. You can force digiKam to scan for new items manually using the <b>Tools->Maintenance->Scan for new items</b> menu entry.</p>"
"<p><i>Note:</i> tooltips show photograph and digiKam metadata on the fly, as the mouse moves over items. This can be useful when selecting items. Tooltips are displayed in the album folder view, album icon view, camera icon view, batch queue list, and thumb bar. From the digiKam configuration dialog, you can customize the contents of these tooltips and the fonts used.</p>"
"<p>You can ignore the following if you use digiKam for the first time:</p>"
"<p><b>Transition from digiKam 4</b></p>"
"<p>Configuration files from digiKam 4 are not migrated. The old database can still be used, you just need to choose the same locations for collections and database in the following dialogs. It is recommended to create a backup of your database before proceeding.</p>"
"<p>The new location for configuration files is %1 (old %2). There are unresolved problems reported when re-using old configuration files, so it is not recommended to do it for the moment, and at your own risk.</p>"
msgid "<b>JPEG output</b>: Using JPEG output, the panorama file will be smaller at the cost of information loss during compression. This is the easiest way to share the result, or print it online or in a shop."
msgid "<b>TIFF output</b>: Using TIFF output, you get the same color depth than your original photos using RAW images at the cost of a bigger panorama file."
msgid "<b>File name template</b>: Set here the base name of the files that will be saved. For example, if your template is <i>panorama</i> and if you chose a JPEG output, then your panorama will be saved with the name <i>panorama.jpg</i>. If you choose to save also the project file, it will have the name <i>panorama.pto</i>."
msgid "<b>Save project file</b>: You can keep the project file generated to stitch your panorama for further tweaking within <a href=\"http://hugin.sourceforge.net/\">Hugin</a> by checking this. This is useful if you want a different projection, modify the horizon or the center of the panorama, or modify the control points to get better results."
"<p><font color=\"orange\"><b>Warning:</b> One or more converted raw files already exists (they will be skipped during the copying process).</font></p>"
"<p>Congratulations. Your images are stitched into a panorama.</p>"
"<p>Your panorama will be created to the directory:<br />"
"<b>%1</b><br />"
"once you press the <i>Finish</i> button, with the name set below.</p>"
"<p>If you choose to save the project file, and if your images were raw images then the converted images used during the stitching process will be copied at the same time (those are TIFF files that can be big).</p>"
msgid "<b>Detect moving skies</b>: During the control points selection and matching, this option discards any points that are associated to a possible cloud. This is useful to prevent moving clouds from altering the control points matching process."
"<p>Now, we will pre-process images before stitching them.</p>"
"<p>Pre-processing operations include Raw demosaicing. Raw images will be converted to 16-bit sRGB images with auto-gamma.</p>"
"<p>Pre-processing also include a calculation of some control points to match overlaps between images. For that purpose, the <b>%1</b> program from the <a href='%2'>%3</a> project will be used.</p>"
"<p>You can generate quickly a <a href='https://en.wikipedia.org/wiki/Time-lapse_photography'>Time-lapse</a> movie from images</p>"
"<p>captured with a tripod mounted camera controlled with an <a href='https://en.wikipedia.org/wiki/Intervalometer#Photography'>intervalometer</a>.</p>"
"<p></p>"
"<p>You can also create a video presentation with transition</p>"
"<p>effects and audio tracks to show on a TV screen.</p>"
msgid "<i>An effect is an visual panning or zooming applied while an image is displayed. The effect duration will follow the number of frames used to render the image on video stream.</i>"
msgid "<i>A transition is an visual effect applied between two images. For some effects, the duration can depend of random values and can change while the slideshow.</i>"
msgid "Face detection is a time-consuming task. You can choose if you wish to employ all processor cores on your system, or work in the background only on one core. Warning: this features still experimental and it's disabled by default."
msgid "Use this option to restrict the duplicate search with some criteria, as to limit search to the album of reference image, or to exclude the album of reference image of the search."
msgid "Select here the approximate similarity interval as a percentage. "
msgstr ""
#. +> trunk5
#: utilities/fuzzysearch/fuzzysearchview.cpp:355
#, kde-format
msgid "Enter the name of the current similar image search to save in the \"Similarity Searches\" view."
msgstr ""
#. +> trunk5
#: utilities/fuzzysearch/fuzzysearchview.cpp:361
#, kde-format
msgid "Save current similar image search to a new virtual Album"
msgstr ""
#. +> trunk5
#: utilities/fuzzysearch/fuzzysearchview.cpp:362
#, kde-format
msgid "If you press this button, the current similar image search will be saved to a new search virtual album using name set on the left side."
msgstr ""
#. +> trunk5
#: utilities/fuzzysearch/fuzzysearchview.cpp:400
#, kde-format
msgid "Set here the brush color used to draw sketch."
msgstr ""
#. +> trunk5
#: utilities/fuzzysearch/fuzzysearchview.cpp:419
#, kde-format
msgid "Undo last draw on sketch"
msgstr ""
#. +> trunk5
#: utilities/fuzzysearch/fuzzysearchview.cpp:420
#, kde-format
msgid "Use this button to undo last drawing action on sketch."
msgstr ""
#. +> trunk5
#: utilities/fuzzysearch/fuzzysearchview.cpp:426
#, kde-format
msgid "Redo last draw on sketch"
msgstr ""
#. +> trunk5
#: utilities/fuzzysearch/fuzzysearchview.cpp:427
#, kde-format
msgid "Use this button to redo last drawing action on sketch."
msgstr ""
#. +> trunk5
#: utilities/fuzzysearch/fuzzysearchview.cpp:430
#, kde-format
msgid "Pen:"
msgstr ""
#. +> trunk5
#: utilities/fuzzysearch/fuzzysearchview.cpp:435
#, kde-format
msgid "Set here the brush size in pixels used to draw sketch."
msgstr ""
#. +> trunk5
#: utilities/fuzzysearch/fuzzysearchview.cpp:442
#, kde-format
msgid "Set here the number of items to find using sketch."
msgstr ""
#. +> trunk5
#: utilities/fuzzysearch/fuzzysearchview.cpp:470
#, kde-format
msgid "Clear sketch"
msgstr ""
#. +> trunk5
#: utilities/fuzzysearch/fuzzysearchview.cpp:471
#, kde-format
msgid "Use this button to clear sketch contents."
msgstr ""
#. +> trunk5
#: utilities/fuzzysearch/fuzzysearchview.cpp:475
#, kde-format
msgid "Enter the name of the current sketch search to save in the \"Similarity Searches\" view."
msgstr ""
#. +> trunk5
#: utilities/fuzzysearch/fuzzysearchview.cpp:481
#, kde-format
msgid "Save current sketch search to a new virtual Album"
msgstr ""
#. +> trunk5
#: utilities/fuzzysearch/fuzzysearchview.cpp:482
#, kde-format
msgid "If you press this button, the current sketch fuzzy search will be saved to a new search virtual album using the name set on the left side."
msgstr ""
#. +> trunk5
#: utilities/fuzzysearch/fuzzysearchview.cpp:697
#, kde-format
msgid ""
"Image fingerprints have not yet been generated for your collection. The Similarity Search Tools will not be operational without pre-generated fingerprints.\n"
"Do you want to build fingerprints now?\n"
"Note: This process can take a while. You can run it any time later using 'Tools/Rebuild all Fingerprints'."
msgstr ""
#. +> trunk5
#: utilities/fuzzysearch/fuzzysearchview.cpp:703
#, kde-format
msgid "No Fingerprints"
msgstr ""
#. +> trunk5
#: utilities/fuzzysearch/sketchwidget.cpp:153
#, kde-format
msgid "You simply draw here a rough sketch of what you want to find and digiKam will displays the best matches in thumbnail view."
msgid "Sets the maximum time difference to interpolate GPX file points to image time data. If the time difference exceeds this setting, no match will be attempted."
msgid "Sets the maximum time difference from a GPS track point to the image time to be matched. If the time difference exceeds this setting, no match will be attempted."
"You have enabled writing to sidecar files for metadata storage in the host application, but not for reading. This means that any metadata stored in the sidecar files will be overwritten here.\n"
"Please enable reading of sidecar files in the host application or continue at your own risk."
msgid "<p>Select the profile for your output device (usually, your printer). This profile will be used to do a soft proof, so you will be able to preview how an image will be rendered via an output device.</p>"
msgid "Cannot open the specified working space profile (\"%1\"). No color transformation will be applied. Please check the color management configuration in digiKam's setup."
msgid "With this button, you can pick the color from the original image used to set <b>Shadow Tone</b> input levels on the Red, Green, Blue, and Luminosity channels."
msgid "With this button, you can pick the color from the original image used to set <b>Middle Tone</b> input levels on the Red, Green, Blue, and Luminosity channels."
msgid "With this button, you can pick the color from the original image used to set <b>Highlight Tone</b> input levels on the Red, Green, Blue, and Luminosity channels."
"<p>This option maximizes the tonal range in the Red, Green, and Blue channels. It searches the image shadow and highlight limit values and adjusts the Red, Green, and Blue channels to a full histogram range.</p>"
"<p>This option scales brightness values across the active image so that the darkest point becomes black, and the brightest point becomes as bright as possible without altering its hue. This is often a \"magic fix\" for images that are dim or washed out.</p>"
"<p>This option adjusts the brightness of colors across the active image so that the histogram for the value channel is as nearly as possible flat, that is, so that each possible brightness value appears at about the same number of pixels as each other value. Sometimes Equalize works wonderfully at enhancing the contrasts in an image. Other times it gives garbage. It is a very powerful operation, which can either work miracles on an image or destroy it.</p>"
"<p>This option enhances the contrast and brightness of the RGB values of an image by stretching the lowest and highest values to their fullest range, adjusting everything in between.</p>"
"<p>This option enhances the contrast and brightness of the RGB values of an image to calculate optimal exposition and black level using image histogram properties.</p>"
msgid "With this button, you can pick the color of the orange mask of the scanned color negative. It represents white point of the negative, or the darkest black tone of the positive image after inversion. It is also the reference point for applying the film profile."
msgid "If you press this button, the white point is calculated from the image data automatically. This function requires to have some residual orange mask around the exposed area of the negative."
msgid "Move the slider to higher values until maximum brightness is achieved without clipping any color channel. Use the output histogram to evaluate each channel."
msgid "A percent of 0 has no effect, values above 0 represent a factor for mixing the destination color with source color this is done radially i.e. the inner part of the brush radius is totally from source and mixing with destination is done gradually till the outer part of the circle."
"<p>Select the blurring effect to apply to image.</p>"
"<p><b>Zoom Blur</b>: blurs the image along radial lines starting from a specified center point. This simulates the blur of a zooming camera.</p>"
"<p><b>Radial Blur</b>: blurs the image by rotating the pixels around the specified center point. This simulates the blur of a rotating camera.</p>"
"<p><b>Far Blur</b>: blurs the image by using far pixels. This simulates the blur of an unfocalized camera lens.</p>"
"<p><b>Motion Blur</b>: blurs the image by moving the pixels horizontally. This simulates the blur of a linear moving camera.</p>"
"<p><b>Softener Blur</b>: blurs the image softly in dark tones and hardly in light tones. This gives images a dreamy and glossy soft focus effect. It is ideal for creating romantic portraits, glamour photographs, or giving images a warm and subtle glow.</p>"
"<p><b>Shake Blur</b>: blurs the image by shaking randomly the pixels. This simulates the blur of a random moving camera.</p>"
"<p><b>Focus Blur</b>: blurs the image corners to reproduce the astigmatism distortion of a lens.</p>"
"<p><b>Smart Blur</b>: finds the edges of color in your image and blurs them without muddying the rest of the image.</p>"
"<p><b>Frost Glass</b>: blurs the image by randomly disperse light coming through a frosted glass.</p>"
"<p><b>Mosaic</b>: divides the photograph into rectangular cells and then recreates it by filling those cells with average pixel value.</p>"
"<p>Note: if you have previously selected an area in the editor, this will be unaffected by the filter. You can use this method to disable the Raindrops effect on a human face, for example.</p>"
msgid "Click on this button to draw zones marking which areas of the image are less important. These zones will be deleted when reducing the picture, or duplicated when enlarging the picture."
msgid "Use this value to give a negative bias to the seams which are not straight. May be useful to prevent distortions in some situations, or to avoid artifacts from pixel skipping (it is better to use low values in such case). This setting applies to the whole selected layer if no rigidity mask is used. Note: the bias is proportional to the difference in the transversal coordinate between each two successive points, elevated to the power of 1.5, and summed up for the whole seam."
msgid "This option lets you choose the maximum transversal step that the pixels in the seams can take. In the standard algorithm, corresponding to the default value step = 1, each pixel in a seam can be shifted by at most one pixel with respect to its neighbors. This implies that the seams can form an angle of at most 45 degrees with respect to their base line. Increasing the step value lets you overcome this limit, but may lead to the introduction of artifacts. In order to balance the situation, you can use the rigidity setting."
msgid "During the carving process, at each step the optimal seam to be carved is chosen based on the relevance value for each pixel. However, in the case where two seams are equivalent (which may happen, for instance, when large portions of the image have the same color), the algorithm always chooses the seams from one side. In some cases, this can pose problems, e.g. an object centered in the original image might not be centered in the resulting image. In order to overcome this effect, this setting allows the favored side to be switched automatically during rescaling, at the cost of slightly worse performance."
msgid "This is the free rotation operation preview. If you move the mouse cursor on this preview, a vertical and horizontal dashed line will be drawn to guide you in adjusting the free rotation correction. Release the left mouse button to freeze the dashed line's position."
msgid "This is the perspective transformation operation preview. You can use the mouse for dragging the corner to adjust the perspective transformation area."
"<p>Select your constrained aspect ratio for cropping. Aspect Ratio Crop tool uses a relative ratio. That means it is the same if you use centimeters or inches and it does not specify the physical size.</p>"
"<p>You can see below a correspondence list of traditional photographic paper sizes and aspect ratio crop:</p>"
"<p><b>8:5</b>: common wide-screen monitor (as 1680x1050)</p>"
"<p><b>2:1</b>, <b>3:1</b>, <b>4:1</b>: common panoramic sizes</p>"
"<p><b>16:9</b>: common tv-screen (as HDTV or Full-HD)</p>"
"<p>The <b>Golden Ratio</b> is 1:1.618. A composition following this rule is considered visually harmonious but can be unadapted to print on standard photographic paper.</p>"
"<p>The <b>Current Aspect Ratio</b> takes aspect ratio from the currently opened image.</p>"
msgid "This is the shear operation preview. If you move the mouse cursor on this preview, a vertical and horizontal dashed line will be drawn to guide you in adjusting the shear correction. Release the left mouse button to freeze the dashed line's position."
msgid "If this option is enabled, the preview area will split vertically. A contiguous area of the image will be shown, with one half from the original image, the other half from the target image."
msgid "If this option is enabled, the preview area will split horizontally. A contiguous area of the image will be shown, with one half from the original image, the other half from the target image."
msgid "If this option is enabled, the preview area will split vertically. The same part of the original and the target image will be shown side by side."
msgid "If this option is enabled, the preview area will split horizontally. The same part of the original and the target image will be shown side by side."
msgid "Failed to toggle lock file <b>%1</b>. Do you want to continue?"
msgstr ""
#. +> trunk5
#: utilities/importui/backend/gpcamera.cpp:1392
#, kde-format
msgctxt "@info List of device properties"
msgid ""
"Title: <b>%1</b><br/>"
"Model: <b>%2</b><br/>"
"Port: <b>%3</b><br/>"
"Path: <b>%4</b><br/>"
"<br/>"
msgstr ""
#. +> trunk5
#: utilities/importui/backend/gpcamera.cpp:1402
#, kde-format
msgctxt "@info List of supported device operations"
msgid ""
"Thumbnails: <b>%1</b><br/>"
"Capture image: <b>%2</b><br/>"
"Delete items: <b>%3</b><br/>"
"Upload items: <b>%4</b><br/>"
"Create directories: <b>%5</b><br/>"
"Delete Directories: <b>%6</b><br/>"
"<br/>"
msgstr ""
#. +> trunk5
#: utilities/importui/backend/umscamera.cpp:577
#, kde-format
msgid ""
"<b>Mounted Camera</b> driver for USB/IEEE1394 mass storage cameras and Flash disk card readers.<br/>"
"<br/>"
msgstr ""
#. +> trunk5
#: utilities/importui/backend/umscamera.cpp:583
#, kde-format
msgctxt "@info List of device properties"
msgid ""
"Title: <b>%1</b><br/>"
"Model: <b>%2</b><br/>"
"Port: <b>%3</b><br/>"
"Path: <b>%4</b><br/>"
"UUID: <b>%5</b><br/>"
"<br/>"
msgstr ""
#. +> trunk5
#: utilities/importui/backend/umscamera.cpp:595
#, kde-format
msgctxt "@info List of supported device operations"
msgid ""
"Thumbnails: <b>%1</b><br/>"
"Capture image: <b>%2</b><br/>"
"Delete items: <b>%3</b><br/>"
"Upload items: <b>%4</b><br/>"
"Create directories: <b>%5</b><br/>"
"Delete directories: <b>%6</b><br/>"
"<br/>"
msgstr ""
#. +> trunk5
#: utilities/importui/backend/umscamera.cpp:612
#, kde-format
msgid "For more information about the <b>Mounted Camera</b> driver, please read the <b>Supported Digital Still Cameras</b> section in the digiKam manual."
msgstr ""
#. +> trunk5
#: utilities/importui/backend/umscamera.cpp:620
#, kde-format
msgid ""
"The <b>Mounted Camera</b> driver is a simple interface to a camera disk mounted locally on your system.<br/>"
"<br/>"
"It does not use libgphoto2 drivers.<br/>"
"<br/>"
"To report any problems with this driver, please contact the digiKam team at:<br/>"
msgid "Set how digiKam will rename files as they are downloaded."
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:241
#, kde-format
msgid "File Renaming Options"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:247
#, kde-format
msgid "Auto-creation of Albums"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:253
#, kde-format
msgid "On the Fly Operations (JPEG only)"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:259
#, kde-format
msgid "DNG Convert Options"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:265
#, kde-format
msgid "Scripting"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:284
#, kde-format
msgctxt "@action Cancel process"
msgid "Cancel"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:291
#, kde-format
msgctxt "@action Information about camera"
msgid "Information"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:298
#, kde-format
msgctxt "@action Capture photo from camera"
msgid "Capture"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:310
#, kde-format
msgctxt "@action:inmenu"
msgid "Select All"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:318
#, kde-format
msgctxt "@action:inmenu"
msgid "Select None"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:326
#, kde-format
msgctxt "@action:inmenu"
msgid "Invert Selection"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:334
#, kde-format
msgctxt "@action:inmenu"
msgid "Select New Items"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:341
#, kde-format
msgctxt "@action:inmenu"
msgid "Select Locked Items"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:349
#, kde-format
msgctxt "@title:menu"
msgid "Download"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:354
#, kde-format
msgctxt "@action"
msgid "Download New"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:361
#, kde-format
msgctxt "@action"
msgid "Download Selected"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:368
#, kde-format
msgctxt "@action"
msgid "Download All"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:376
#, kde-format
msgctxt "@action"
msgid "Download && Delete New"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:384
#, kde-format
msgctxt "@action"
msgid "Download && Delete Selected"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:392
#, kde-format
msgctxt "@action"
msgid "Download && Delete All"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:399
#, kde-format
msgctxt "@action"
msgid "Upload..."
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:407
#, kde-format
msgctxt "@action"
msgid "Toggle Lock"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:415
#, kde-format
msgctxt "@action"
msgid "Mark as downloaded"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:422
#, kde-format
msgctxt "@title:menu"
msgid "Delete"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:427
#, kde-format
msgctxt "@action"
msgid "Delete Selected"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:435
#, kde-format
msgctxt "@action"
msgid "Delete All"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:441
#, kde-format
msgctxt "@action"
msgid "Delete New"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:449
#, kde-format
msgctxt "@title:group"
msgid "Views"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:460
#, kde-format
msgctxt "@action View the selected image"
msgid "Preview Item"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:480
#, kde-format
msgctxt "@title:menu"
msgid "&Sort Items"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:481
#, kde-format
msgctxt "@info:whatsthis"
msgid "The value by which the items are sorted in the thumbnail view"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:487
#, kde-format
msgctxt "item:inmenu Sort by"
msgid "By Name"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:488
#, kde-format
msgctxt "item:inmenu Sort by"
msgid "By Path"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:489
#, kde-format
msgctxt "item:inmenu Sort by"
msgid "By Date"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:490
#, kde-format
msgctxt "item:inmenu Sort by"
msgid "By Size"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:491
#, kde-format
msgctxt "item:inmenu Sort by"
msgid "By Rating"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:492
#, kde-format
msgctxt "item:inmenu Sort by"
msgid "By Download State"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:512
#, kde-format
msgctxt "@title:inmenu"
msgid "Item Sorting &Order"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:513
#, kde-format
msgctxt "@info:whatsthis"
msgid "Defines whether items are sorted in ascending or descending manner."
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:518
#, kde-format
msgctxt "@item:inmenu Sorting Order"
msgid "Ascending"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:519
#, kde-format
msgctxt "@item:inmenu Sorting Order"
msgid "Descending"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:531
#, kde-format
msgctxt "@title:menu"
msgid "&Group Items"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:532
#, kde-format
msgctxt "@info:whatsthis"
msgid "The categories in which the items in the thumbnail view are displayed"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:538
#, kde-format
msgctxt "@item:inmenu Group Items"
msgid "Flat List"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:539
#, kde-format
msgctxt "@item:inmenu Group Items"
msgid "By Folder"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:540
#, kde-format
msgctxt "@item:inmenu Group Items"
msgid "By Format"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:541
#, kde-format
msgctxt "@item:inmenu Group Items"
msgid "By Date"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:569
#, kde-format
msgctxt "@action:inmenu"
msgid "Fit to &Window"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:574
#, kde-format
msgctxt "@action:inmenu"
msgid "Zoom to 100%"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:592
#, kde-format
msgctxt "@option:check"
msgid "Show History"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:598
#, kde-format
msgctxt "@option:check"
msgid "Show Thumbbar"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:623
#: utilities/importui/main/importui.cpp:853
#, kde-format
msgctxt "@action"
msgid "Previous Image"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:630
#, kde-format
msgctxt "@action Connection failed, try again?"
msgid "Retry"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:842
#, kde-format
msgctxt "@action"
msgid "Exit Preview Mode"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:847
#, kde-format
msgctxt "@action"
msgid "Next Image"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:859
#, kde-format
msgctxt "@action Go to first image"
msgid "First Image"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:864
#, kde-format
msgctxt "@action Go to last image"
msgid "Last Image"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:946
#, kde-format
msgctxt "@info:status"
msgid "Canceling current operation, please wait..."
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:1003
#, kde-format
msgctxt "@info"
msgid "Do you want to close the dialog and cancel the current operation?"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:1013
#, kde-format
msgctxt "@info:status"
msgid "Disconnecting from camera, please wait..."
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:1055
#, kde-format
msgctxt "@info:status"
msgid "Scanning for new files, please wait..."
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:1094
#, kde-format
msgctxt "@info:status"
msgid "Ready"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:1150
#, kde-format
msgctxt "@info"
msgid "Failed to connect to the camera. Please make sure it is connected properly and turned on."
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:1240
#, kde-format
msgctxt "@title:window"
msgid "Select Image to Upload"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:1274
#, kde-format
msgctxt "@info"
msgid ""
"There is not enough free space on the Camera Medium to upload pictures.\n"
"\n"
"Space require: %1\n"
"Available free space: %2"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:1328
#, kde-format
msgctxt "@info"
msgid ""
"<qt>Camera Folder <resource>%1</resource> already contains the item <resource>%2</resource>.<br>"
"Please enter a new filename (without extension):</qt>"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:1332
#, kde-format
msgctxt "@title:window"
msgid "File already exists"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:1398
#, kde-format
msgctxt "@info"
msgid "Your custom target album date format is not valid. Please check your settings..."
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:1438
#, kde-format
msgctxt "@info"
msgid "Collection which host your default target album set to process download from camera device is not available. Please select another one from camera configuration dialog."
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:1447
#, kde-format
msgctxt "@info"
msgid "Your default target album set to process download from camera device is not available. Please select another one from camera configuration dialog."
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:1472
#, kde-format
msgctxt "@info"
msgid "<p>Please select the destination album from the digiKam library to import the camera pictures into.</p>"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:1563
#, kde-format
msgctxt "@info Popup notification"
msgid "Images download finished, you can now detach your camera while the images will be auto-rotated"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:1570
#, kde-format
msgctxt "@info Popup notification"
msgid "Images download finished"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:1960
#, kde-format
msgctxt "@info"
msgid "The items listed below are locked by camera (read-only). These items will not be deleted. If you really want to delete these items, please unlock them and try again."
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:1971
#, kde-format
msgctxt "@info"
msgid "About to delete this image. <b>Deleted file is unrecoverable.</b> Are you sure?"
msgid_plural "About to delete these %1 images. <b>Deleted files are unrecoverable.</b> Are you sure?"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:2022
#, kde-format
msgctxt "@title:window"
msgid "Insufficient Disk Space"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:2023
#, kde-format
msgctxt "@info"
msgid ""
"There is not enough free space on the disk of the album you selected to download and process the selected pictures from the camera.\n"
"\n"
"Estimated space required: %1\n"
"Available free space: %2\n"
"\n"
"Try Anyway?"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:2333
#: utilities/importui/main/importui.cpp:2359
#, kde-format
msgctxt "@info:status"
msgid "No item selected (%1 item)"
msgid_plural "No item selected (%1 items)"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:2351
#, kde-format
msgctxt "@info:status Filename of first selected item of number of items"
msgid "<b>%1</b> (%2 of %3)"
msgstr ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:2369
#, kde-format
msgctxt "@info:status"
msgid "%2/%1 item selected"
msgid_plural "%2/%1 items selected"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5
#: utilities/importui/main/importui.cpp:2446
#, kde-format
msgctxt "@info"
msgid "A file with the same name (<b>%1</b>) already exists in folder <resource>%2</resource>."
msgid "Enable this option to set date and time metadata tags to the right values if your camera does not set these tags correctly when pictures are taken. The values will be saved in the DateTimeDigitized and DateTimeCreated EXIF, XMP, and IPTC tags."
msgid "Enable this option to automatically convert all JPEG files to a lossless image format. <b>Note:</b> Image conversion can take a while on a slow computer."
"<p>These expressions may be used to customize date format:</p>"
"<p><b>d</b>: The day as a number without a leading zero (1 to 31)</p>"
"<p><b>dd</b>: The day as a number with a leading zero (01 to 31)</p>"
"<p><b>ddd</b>: The abbreviated localized day name (e.g. 'Mon' to 'Sun')</p>"
"<p><b>dddd</b>: The long localized day name (e.g. 'Monday' to 'Sunday').</p>"
"<p><b>M</b>: The month as a number without a leading zero (1 to 12)</p>"
"<p><b>MM</b>: The month as a number with a leading zero (01 to 12)</p>"
"<p><b>MMM</b>: The abbreviated localized month name (e.g. 'Jan' to 'Dec')</p>"
"<p><b>MMMM</b>: The long localized month name (e.g. 'January' to 'December')</p>"
"<p><b>yy</b>: The year as two digit number (eg. 00 to 99)</p>"
"<p><b>yyyy</b>: The year as four digit number (eg. 2012)</p>"
"<p>All other input characters will be treated as text. Any sequence of characters that are enclosed in singlequotes will be treated as text and not be used as an expression. Examples, if date is 20 July 1969:"
"<p>"
"<p><b>dd.MM.yyyy</b> : 20.07.1969</p>"
"<p><b>ddd MMMM d yy</b> : Sun July 20 69</p>"
"<p><b>'Photo shot on ' dddd</b> : Photo shot on Sunday</p>"
msgid "Enable this option if you want to download your pictures into automatically created file extension-based sub-albums of the destination album. This way, you can separate JPEG and RAW files as they are downloaded from your camera."
msgid "Set this option to turn-on the DLNA server at application start-up automatically"
msgstr ""
#. +> trunk5
#: utilities/mediaserver/dmediaserverdlg.cpp:164
#, kde-format
msgid ""
"The media server permit to share items through the local network using <a href='https://en.wikipedia.org/wiki/Digital_Living_Network_Alliance'>DLNA</a> standard and <a href='https://en.wikipedia.org/wiki/Universal_Plug_and_Play'>UPNP</a> protocol. Many kind of electronic devices can support DLNA, as tablets, cellulars, TV, etc.<br>"
"Note: depending of the network features and the configuration, the delay to discover the server on client devices can take a while."
msgstr ""
#. +> trunk5
#: utilities/mediaserver/dmediaserverdlg.cpp:221
#: utilities/mediaserver/dmediaserverdlg.cpp:301
#: utilities/mediaserver/dmediaserverdlg.cpp:314
#, kde-format
msgid "Media Server Contents"
msgstr ""
#. +> trunk5
#: utilities/mediaserver/dmediaserverdlg.cpp:222
#, kde-format
msgid "The items list to share has changed. Do you want to start now the media server with this contents?"
msgid "<b>Note: <b><a href='http://en.wikipedia.org/wiki/EXIF'>EXIF</a></b> text tags marked by (*) only support printable <b><a href='http://en.wikipedia.org/wiki/Ascii'>ASCII</a></b> characters.</b>"
msgid "Set here the date and time when the original image data was generated. For a digital still camera the date and time the picture was taken are recorded."
msgid "Set here the date and time when the image was stored as digital data. If, for example, an image was captured by a digital still camera and at the same time the file was recorded, then Original and Digitization date and time will have the same contents."
msgid "Set here the fractions of seconds for the date and time when the image was stored as digital data."
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exifdevice.cpp:131
#, kde-format
msgid "Device manufacturer (*):"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exifdevice.cpp:135
#, kde-format
msgid "Set here the manufacturer of image input equipment used to take the picture. This field is limited to ASCII characters."
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exifdevice.cpp:140
#, kde-format
msgid "Device model (*):"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exifdevice.cpp:144
#, kde-format
msgid "Set here the model of image input equipment used to take the picture. This field is limited to ASCII characters."
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exifdevice.cpp:149
#, kde-format
msgid "Device type:"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exifdevice.cpp:151
#, kde-format
msgid "Film scanner"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exifdevice.cpp:152
#, kde-format
msgid "Reflection print scanner"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exifdevice.cpp:153
#, kde-format
msgid "Digital still camera"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exifdevice.cpp:154
#, kde-format
msgid "Select here the image input equipment type used to take the picture."
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exifdevice.cpp:157
#, kde-format
msgid "<b>Warning: EXIF <b><a href='http://en.wikipedia.org/wiki/Exchangeable_image_file_format#MakerNote_data'>Makernotes</a></b> can be unreadable if you set wrong device manufacturer/model description.</b>"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exifdevice.cpp:169
#, kde-format
msgid "Exposure time (seconds):"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exifdevice.cpp:182
#, kde-format
msgid "Set on this option to set the exposure time of picture, given in seconds."
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exifdevice.cpp:187
#, kde-format
msgid "Exposure program:"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exifdevice.cpp:189
#, kde-format
msgctxt "exposure program"
msgid "Not defined"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exifdevice.cpp:190
#, kde-format
msgctxt "exposure program"
msgid "Manual"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exifdevice.cpp:191
#, kde-format
msgctxt "exposure program"
msgid "Auto"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exifdevice.cpp:192
#, kde-format
msgctxt "exposure program"
msgid "Aperture priority"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exifdevice.cpp:193
#, kde-format
msgctxt "exposure program"
msgid "Shutter priority"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exifdevice.cpp:194
#, kde-format
msgctxt "exposure program"
msgid "Creative program"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exifdevice.cpp:195
#, kde-format
msgctxt "exposure program"
msgid "Action program"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exifdevice.cpp:196
#, kde-format
msgctxt "exposure program"
msgid "Portrait mode"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exifdevice.cpp:197
#, kde-format
msgctxt "exposure program"
msgid "Landscape mode"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exifdevice.cpp:198
#, kde-format
msgid "Select here the program used by the camera to set exposure when the picture was taken."
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exifdevice.cpp:203
#, kde-format
msgid "Exposure mode:"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exifdevice.cpp:205
#, kde-format
msgctxt "exposure mode"
msgid "Auto"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exifdevice.cpp:206
#, kde-format
msgctxt "exposure mode"
msgid "Manual"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exifdevice.cpp:207
#, kde-format
msgctxt "exposure mode"
msgid "Auto bracket"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exifdevice.cpp:208
#, kde-format
msgid "Select here the mode used by the camera to set exposure when the picture was taken. In auto-bracketing mode, the camera shoots a series of frames of the same scene at different exposure settings."
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exifdevice.cpp:216
#, kde-format
msgid "Exposure bias (APEX):"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exifdevice.cpp:221
#, kde-format
msgid "Set here the exposure bias value (in APEX units) used by camera to take the picture."
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exifdevice.cpp:228
#, kde-format
msgid "Metering mode:"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exifdevice.cpp:230
#, kde-format
msgctxt "metering mode"
msgid "Unknown"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exifdevice.cpp:231
#, kde-format
msgctxt "metering mode"
msgid "Average"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exifdevice.cpp:232
#, kde-format
msgctxt "metering mode"
msgid "Center weighted average"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exifdevice.cpp:233
#, kde-format
msgctxt "metering mode"
msgid "Spot"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exifdevice.cpp:234
#, kde-format
msgctxt "metering mode"
msgid "Multi-spot"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exifdevice.cpp:235
#, kde-format
msgctxt "metering mode"
msgid "Multi-segment"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exifdevice.cpp:236
#, kde-format
msgctxt "metering mode"
msgid "Partial"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exifdevice.cpp:237
#, kde-format
msgctxt "metering mode"
msgid "Other"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exifdevice.cpp:238
#, kde-format
msgid "Select here the metering mode used by the camera to set exposure when the picture was taken."
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exifdevice.cpp:243
#, kde-format
msgid "Sensitivity (ISO):"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exifdevice.cpp:281
#, kde-format
msgid "Select here the ISO Speed of the camera which took the picture."
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exifdevice.cpp:286
#, kde-format
msgid "Sensing method:"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exifdevice.cpp:288
#, kde-format
msgid "Not defined"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exifdevice.cpp:289
#, kde-format
msgid "One-chip color area"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exifdevice.cpp:290
#, kde-format
msgid "Two-chip color area"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exifdevice.cpp:291
#, kde-format
msgid "Three-chip color area"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exifdevice.cpp:292
#, kde-format
msgid "Color sequential area"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exifdevice.cpp:293
#, kde-format
msgid "Trilinear sensor"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exifdevice.cpp:294
#, kde-format
msgid "Color sequential linear"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exifdevice.cpp:295
#, kde-format
msgid "Select here the image sensor type used by the camera to take the picture."
msgid "Set here the lens focal length in millimeters used by camera to take the picture."
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exiflens.cpp:163
#, kde-format
msgid "Focal length in 35mm film (mm):"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exiflens.cpp:169
#, kde-format
msgid "Set here equivalent focal length assuming a 35mm film camera, in mm. A value of 0 means the focal length is unknown."
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exiflens.cpp:175
#, kde-format
msgid "Digital zoom ratio:"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exiflens.cpp:181
#, kde-format
msgid "Set here the digital zoom ratio used by camera to take the picture."
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exiflens.cpp:186
#, kde-format
msgid "Lens aperture (f-number):"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exiflens.cpp:189
#, kde-format
msgid "Select here the lens aperture used by camera to take the picture."
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exiflens.cpp:194
#, kde-format
msgid "Max. lens aperture (f-number):"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exiflens.cpp:197
#, kde-format
msgid "Select here the smallest aperture of the lens used by camera to take the picture."
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exiflight.cpp:83
#, kde-format
msgid "No flash"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exiflight.cpp:84
#, kde-format
msgid "Fired"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exiflight.cpp:85
#, kde-format
msgid "Fired, no strobe return light"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exiflight.cpp:86
#, kde-format
msgid "Fired, strobe return light"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exiflight.cpp:87
#, kde-format
msgid "Yes, compulsory"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exiflight.cpp:88
#, kde-format
msgid "Yes, compulsory, no return light"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exiflight.cpp:89
#, kde-format
msgid "Yes, compulsory, return light"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exiflight.cpp:90
#, kde-format
msgid "No, compulsory"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exiflight.cpp:91
#, kde-format
msgid "No, auto"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exiflight.cpp:92
#, kde-format
msgid "Yes, auto"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exiflight.cpp:93
#, kde-format
msgid "Yes, auto, no return light"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exiflight.cpp:94
#, kde-format
msgid "Yes, auto, return light"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exiflight.cpp:95
#, kde-format
msgid "No flash function"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exiflight.cpp:96
#, kde-format
msgid "Yes, red-eye"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exiflight.cpp:97
#, kde-format
msgid "Yes, red-eye, no return light"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exiflight.cpp:98
#, kde-format
msgid "Yes, red-eye, return light"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exiflight.cpp:99
#, kde-format
msgid "Yes, compulsory, red-eye"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exiflight.cpp:100
#, kde-format
msgid "Yes, compulsory, red-eye, no return light"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exiflight.cpp:101
#, kde-format
msgid "Yes, compulsory, red-eye, return light"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exiflight.cpp:102
#, kde-format
msgid "Yes, auto, red-eye"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exiflight.cpp:103
#, kde-format
msgid "Yes, auto, red-eye, no return light"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exiflight.cpp:104
#, kde-format
msgid "Yes, auto, red-eye, return light"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exiflight.cpp:134
#, kde-format
msgid "Light source:"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exiflight.cpp:136
#, kde-format
msgctxt "light source"
msgid "Unknown"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exiflight.cpp:137
#, kde-format
msgctxt "light source"
msgid "Daylight"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exiflight.cpp:138
#, kde-format
msgctxt "light source"
msgid "Fluorescent"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exiflight.cpp:139
#, kde-format
msgctxt "light source"
msgid "Tungsten (incandescent light)"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exiflight.cpp:140
#, kde-format
msgctxt "light source"
msgid "Flash"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exiflight.cpp:141
#, kde-format
msgctxt "light source"
msgid "Fine weather"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exiflight.cpp:142
#, kde-format
msgctxt "light source"
msgid "Cloudy weather"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exiflight.cpp:143
#, kde-format
msgctxt "light source"
msgid "Shade"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exiflight.cpp:144
#, kde-format
msgctxt "light source"
msgid "Daylight fluorescent (D 5700 - 7100K)"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exiflight.cpp:145
#, kde-format
msgctxt "light source"
msgid "Day white fluorescent (N 4600 - 5400K)"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exiflight.cpp:146
#, kde-format
msgctxt "light source"
msgid "Cool white fluorescent (W 3900 - 4500K)"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exiflight.cpp:147
#, kde-format
msgctxt "light source"
msgid "White fluorescent (WW 3200 - 3700K)"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exiflight.cpp:148
#, kde-format
msgctxt "light source"
msgid "Standard light A"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exiflight.cpp:149
#, kde-format
msgctxt "light source"
msgid "Standard light B"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exiflight.cpp:150
#, kde-format
msgctxt "light source"
msgid "Standard light C"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exiflight.cpp:151
#, kde-format
msgctxt "light source"
msgid "D55"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exiflight.cpp:152
#, kde-format
msgctxt "light source"
msgid "D65"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exiflight.cpp:153
#, kde-format
msgctxt "light source"
msgid "D75"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exiflight.cpp:154
#, kde-format
msgctxt "light source"
msgid "D50"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exiflight.cpp:155
#, kde-format
msgctxt "light source"
msgid "ISO studio tungsten"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exiflight.cpp:156
#, kde-format
msgctxt "light source"
msgid "Other light source"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exiflight.cpp:157
#, kde-format
msgid "Select here the kind of light source used to take the picture."
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exiflight.cpp:162
#, kde-format
msgid "Flash mode:"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exiflight.cpp:168
#, kde-format
msgid "Select here the flash program mode used by the camera to take the picture."
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exiflight.cpp:173
#, kde-format
msgid "Flash energy (BCPS):"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exiflight.cpp:179
#, kde-format
msgid "Set here the flash energy used to take the picture in BCPS units. Beam Candle Power Seconds is the measure of effective intensity of a light source when it is focused into a beam by a reflector or lens. This value is the effective intensity for a period of one second."
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exiflight.cpp:187
#, kde-format
msgid "White balance:"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exiflight.cpp:190
#, kde-format
msgid "Manual"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/exif/exiflight.cpp:191
#, kde-format
msgid "Select here the white balance mode set by the camera when the picture was taken."
msgid "<b>Note: <b><a href='http://en.wikipedia.org/wiki/IPTC_Information_Interchange_Model'>IPTC</a></b> text tags only support the printable <b><a href='http://en.wikipedia.org/wiki/Ascii'>ASCII</a></b> characters and limit string sizes. Use contextual help for details.</b>"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/iptc/iptccontent.cpp:89
#: utilities/metadataedit/xmp/xmpcontent.cpp:87
#, kde-format
msgid "Headline:"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/iptc/iptccontent.cpp:94
#, kde-format
msgid "Enter here the content synopsis. This field is limited to 256 ASCII characters."
msgid "Enter here the Informative Provider Reference. I.P.R is a name registered with the IPTC/NAA, identifying the provider that provides an indicator of the content. The default value for the I.P.R is \"IPTC\" if a standard Reference Code is used. This field is limited to 32 ASCII characters."
msgid "Enter here the Subject Reference Number. Provides a numeric code to indicate the Subject Name plus optional Subject Matter and Subject Detail Names in the language of the service. Subject Reference is a number from the range 01000000 to 17999999 and represent a language independent international reference to a Subject. A Subject is identified by its Reference Number and corresponding Names taken from a standard lists given by IPTC/NAA. If a standard reference code is used, these lists are the English language reference versions. This field is limited to 8 ASCII digit code."
msgid "Enter here the Subject Name. English language is used if you selected a standard IPTC/NAA reference code. This field is limited to 64 ASCII characters."
msgid "Enter here the Subject Matter Name. English language is used if you selected a standard IPTC/NAA reference code. This field is limited to 64 ASCII characters."
msgid "Enter here the Subject Detail Name. English language is used if you selected a standard IPTC/NAA reference code. This field is limited to 64 ASCII characters."
msgid "Set here the original content transmission reference."
msgstr ""
#. +> trunk5
#: utilities/metadataedit/xmp/xmpstatus.cpp:81
#, kde-format
msgctxt "short title for the content"
msgid "Title:"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/xmp/xmpstatus.cpp:82
#, kde-format
msgid "Set here a shorthand reference for the content."
msgstr ""
#. +> trunk5
#: utilities/metadataedit/xmp/xmpstatus.cpp:86
#, kde-format
msgid "Nickname:"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/xmp/xmpstatus.cpp:89
#, kde-format
msgid "A short informal name for the resource."
msgstr ""
#. +> trunk5
#: utilities/metadataedit/xmp/xmpstatus.cpp:93
#, kde-format
msgid "Identifiers:"
msgstr ""
#. +> trunk5
#: utilities/metadataedit/xmp/xmpstatus.cpp:94
#, kde-format
msgid "Set here the strings that identify content that recurs."
msgstr ""
#. +> trunk5
#: utilities/metadataedit/xmp/xmpstatus.cpp:101
#, kde-format
msgid "Enter the editorial usage instructions."
msgstr ""
#. +> trunk5
#: utilities/metadataedit/xmp/xmpsubjects.cpp:51
#, kde-format
msgid "Enter here the Informative Provider Reference. I.P.R is a name registered with the XMP/NAA, identifying the provider that provides an indicator of the content. The default value for the I.P.R is \"XMP\" if a standard Reference Code is used."
msgstr ""
#. +> trunk5
#: utilities/metadataedit/xmp/xmpsubjects.cpp:57
#, kde-format
msgid "Enter here the Subject Reference Number. Provides a numeric code to indicate the Subject Name plus optional Subject Matter and Subject Detail Names in the language of the service. Subject Reference is a number from the range 01000000 to 17999999 and represent a language independent international reference to a Subject. A Subject is identified by its Reference Number and corresponding Names taken from a standard lists given by XMP/NAA. If a standard reference code is used, these lists are the English language reference versions. This field is limited to 8 digit code."
msgstr ""
#. +> trunk5
#: utilities/metadataedit/xmp/xmpsubjects.cpp:70
#, kde-format
msgid "Enter here the Subject Name. English language is used if you selected a standard XMP/NAA reference code."
msgstr ""
#. +> trunk5
#: utilities/metadataedit/xmp/xmpsubjects.cpp:74
#, kde-format
msgid "Enter here the Subject Matter Name. English language is used if you selected a standard XMP/NAA reference code."
msgstr ""
#. +> trunk5
#: utilities/metadataedit/xmp/xmpsubjects.cpp:78
#, kde-format
msgid "Enter here the Subject Detail Name. English language is used if you selected a standard XMP/NAA reference code."
msgid "Enter script for execution. Use $INPUT and $OUTPUT for input / output filenames (with special characters escaped). These would be substituted before shell execution."
msgid "When you choose to have the watermark repeated randomly, many times in the placement combo box, you can specify here whether the repetition, you can check this to make the watermark rotations random also [0, 90, 180, 270]"
msgid "Use this to get more control over the sparsity of watermark repetition. The higher the value the sparser the watermarks get. Use floating point values, typically between 1.0 and 3.0. It can also be less than 1.0"
msgid "If you have a photo in your set with a clock or another external time source on it, you can load it here and set the indicator to the (date and) time displayed. The difference of your internal camera clock will be determined from this setting."
"for pictures meeting the following conditions</p>"
"</qt>"
msgstr ""
#. +> trunk5
#: utilities/searchwindow/searchgroup.cpp:534
#, kde-format
msgid "Remove Group"
msgstr ""
#. +> trunk5
#: utilities/searchwindow/searchgroup.cpp:577
#, kde-format
msgid "Hide Options <<"
msgstr ""
#. +> trunk5
#: utilities/searchwindow/searchgroup.cpp:587
#, kde-format
msgid "Options >>"
msgstr ""
#. +> trunk5
#: utilities/searchwindow/searchtabheader.cpp:108
#: utilities/searchwindow/searchtabheader.cpp:114
#, kde-format
msgid "(Advanced Search)"
msgstr ""
#. +> trunk5
#: utilities/searchwindow/searchtabheader.cpp:210
#, kde-format
msgid "New Search"
msgstr ""
#. +> trunk5
#: utilities/searchwindow/searchtabheader.cpp:212
#, kde-format
msgid "Search:"
msgstr ""
#. +> trunk5
#: utilities/searchwindow/searchtabheader.cpp:215
#, kde-format
msgid "Enter keywords here..."
msgstr ""
#. +> trunk5
#: utilities/searchwindow/searchtabheader.cpp:231
#, kde-format
msgid "Save Current Search"
msgstr ""
#. +> trunk5
#: utilities/searchwindow/searchtabheader.cpp:235
#, kde-format
msgid "Enter a name for the current search to save it in the \"Searches\" view"
msgstr ""
#. +> trunk5
#: utilities/searchwindow/searchtabheader.cpp:240
#, kde-format
msgid "Save current search to a new virtual Album"
msgstr ""
#. +> trunk5
#: utilities/searchwindow/searchtabheader.cpp:241
#, kde-format
msgid "If you press this button, the current search will be saved to a new virtual Search Album using the name set on the left side."
msgstr ""
#. +> trunk5
#: utilities/searchwindow/searchtabheader.cpp:255
#: utilities/searchwindow/searchtabheader.cpp:272
#, kde-format
msgid "Edit Stored Search"
msgstr ""
#. +> trunk5
#: utilities/searchwindow/searchtabheader.cpp:278
#, kde-format
msgid "Edit..."
msgstr ""
#. +> trunk5
#: utilities/searchwindow/searchview.cpp:496
#, kde-format
msgid "Add Search Group"
msgstr ""
#. +> trunk5
#: utilities/searchwindow/searchwindow.cpp:91
#, kde-format
msgid "Advanced Search"
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupalbumview.cpp:159
#: utilities/setup/camera/setupcamera.cpp:461
#, kde-format
msgid "Show file&name"
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupalbumview.cpp:160
#: utilities/setup/camera/setupcamera.cpp:462
#, kde-format
msgid "Set this option to show the filename below the image thumbnail."
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupalbumview.cpp:162
#: utilities/setup/camera/setupcamera.cpp:464
#, kde-format
msgid "Show file si&ze"
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupalbumview.cpp:163
#: utilities/setup/camera/setupcamera.cpp:465
#, kde-format
msgid "Set this option to show the file size below the image thumbnail."
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupalbumview.cpp:165
#: utilities/setup/camera/setupcamera.cpp:467
#, kde-format
msgid "Show camera creation &date"
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupalbumview.cpp:166
#: utilities/setup/camera/setupcamera.cpp:468
#, kde-format
msgid "Set this option to show the camera creation date below the image thumbnail."
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupalbumview.cpp:169
#, kde-format
msgid "Show file &modification date"
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupalbumview.cpp:170
#, kde-format
msgid "Set this option to show the file modification date below the image thumbnail if it's different than camera creation date. This option is useful to identify quickly which items have been modified."
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupalbumview.cpp:174
#, kde-format
msgid "Show ima&ge dimensions"
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupalbumview.cpp:175
#, kde-format
msgid "Set this option to show the image size in pixels below the image thumbnail."
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupalbumview.cpp:178
#, kde-format
msgid "Show image aspect ratio"
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupalbumview.cpp:179
#, kde-format
msgid "Set this option to show the image aspect ratio below the image thumbnail."
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupalbumview.cpp:182
#, kde-format
msgid "Show image format"
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupalbumview.cpp:183
#, kde-format
msgid "Set this option to show image mime type over image thumbnail."
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupalbumview.cpp:185
#, kde-format
msgid "Show digiKam tit&le"
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupalbumview.cpp:186
#, kde-format
msgid "Set this option to show the digiKam title below the image thumbnail."
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupalbumview.cpp:189
#, kde-format
msgid "Show digiKam &captions"
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupalbumview.cpp:190
#, kde-format
msgid "Set this option to show the digiKam captions below the image thumbnail."
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupalbumview.cpp:193
#: utilities/setup/camera/setupcamera.cpp:483
#, kde-format
msgid "Show digiKam &tags"
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupalbumview.cpp:194
#, kde-format
msgid "Set this option to show the digiKam tags list below the image thumbnail."
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupalbumview.cpp:197
#, kde-format
msgid "Show digiKam &rating"
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupalbumview.cpp:198
#, kde-format
msgid "Set this option to show the digiKam rating below the image thumbnail."
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupalbumview.cpp:201
#: utilities/setup/camera/setupcamera.cpp:491
#, kde-format
msgid "Show rotation overlay buttons"
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupalbumview.cpp:202
#, kde-format
msgid "Set this option to show overlay buttons over the image thumbnail to be able to process left or right image rotation."
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupalbumview.cpp:205
#, kde-format
msgid "Show fullscreen overlay button"
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupalbumview.cpp:206
#, kde-format
msgid "Set this option to show an overlay button over the image thumbnail to open it in fullscreen mode."
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupalbumview.cpp:209
#: utilities/setup/camera/setupcamera.cpp:480
#, kde-format
msgid "Show Geolocation Indicator"
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupalbumview.cpp:210
#, kde-format
msgid "Set this option to show an icon over the image thumbnail if item has geolocation information."
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupalbumview.cpp:212
#: utilities/setup/camera/setupcamera.cpp:495
#, kde-format
msgid "Thumbnail click action:"
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupalbumview.cpp:214
#, kde-format
msgid "Show preview"
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupalbumview.cpp:215
#: utilities/setup/camera/setupcamera.cpp:498
#, kde-format
msgid "Start image editor"
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupalbumview.cpp:216
#: utilities/setup/camera/setupcamera.cpp:499
#, kde-format
msgid "Choose what should happen when you click on a thumbnail."
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupalbumview.cpp:218
#: utilities/setup/camera/setupcamera.cpp:501
#, kde-format
msgid "Icon View font:"
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupalbumview.cpp:219
#, kde-format
msgid "Select here the font used to display text in icon views."
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupalbumview.cpp:221
#, kde-format
msgid "Use large thumbnail size for high screen resolution"
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupalbumview.cpp:222
#, kde-format
msgid ""
"Set this option to render icon-view with large thumbnail size, for example in case of 4K monitor is used.\n"
"By default this option is turned off and the maximum thumbnail size is limited to 256x256 pixels. When this option is enabled, thumbnail size can be extended to 512x512 pixels.\n"
"This option will store more data in thumbnail database and will use more system memory. digiKam needs to be restarted to take effect, and Rebuild Thumbnails option from Maintenance tool needs to be processed over whole collections."
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupalbumview.cpp:253
#, kde-format
msgctxt "@title:tab"
msgid "Icons"
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupalbumview.cpp:260
#, kde-format
msgid "Tree View icon size:"
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupalbumview.cpp:266
#, kde-format
msgid "Set this option to configure the size in pixels of the Tree View icons in digiKam's sidebars."
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupalbumview.cpp:269
#, kde-format
msgid "Tree View font:"
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupalbumview.cpp:270
#, kde-format
msgid "Select here the font used to display text in Tree Views."
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupalbumview.cpp:272
#, kde-format
msgid "Show a count of items in Tree Views"
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupalbumview.cpp:273
#, kde-format
msgid "Set this option to display along the album name the number of icon-view items inside."
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupalbumview.cpp:283
#, kde-format
msgctxt "@title:tab"
msgid "Tree-Views"
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupalbumview.cpp:291
#, kde-format
msgctxt "@option:radio"
msgid "Preview shows embedded view if available (faster)"
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupalbumview.cpp:293
#, kde-format
msgctxt "@option:radio"
msgid "Preview shows the full image"
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupalbumview.cpp:295
#, kde-format
msgctxt "@label:listbox Mode of RAW preview decoding:"
msgid "Raw images:"
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupalbumview.cpp:298
#, kde-format
msgctxt "@option:inlistbox Automatic choice of RAW image preview source"
msgid "Automatic"
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupalbumview.cpp:300
#, kde-format
msgctxt "@option:inlistbox Embedded preview as RAW image preview source"
msgid "Embedded preview"
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupalbumview.cpp:302
#, kde-format
msgctxt "@option:inlistbox Original, half-size data as RAW image preview source"
msgid "Raw data in half size"
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupalbumview.cpp:304
#, kde-format
msgid "Preview image is converted to 8 bits for a faster viewing"
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupalbumview.cpp:305
#, kde-format
msgid "Uncheck this if you do not want to convert a 16 bits preview image to 8 bits."
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupalbumview.cpp:307
#, kde-format
msgid "Preview is zoomed to the original image size"
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupalbumview.cpp:308
#, kde-format
msgid "Uncheck this if you do not want to zoom the preview to the original image size."
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupalbumview.cpp:310
#: utilities/setup/camera/setupcamera.cpp:536
#, kde-format
msgid "Show icons and text over preview"
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupalbumview.cpp:311
#, kde-format
msgid "Uncheck this if you do not want to see icons and text in the image preview."
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupalbumview.cpp:328
#, kde-format
msgctxt "@title:tab"
msgid "Preview"
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupalbumview.cpp:343
#, kde-format
msgctxt "@title:tab"
msgid "Full-Screen"
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupalbumview.cpp:348
#, kde-format
msgctxt "@title:tab"
msgid "Mime Types"
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupalbumview.cpp:351
#, kde-format
msgctxt "@title:tab"
msgid "Categories"
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupalbumview.cpp:516
#, kde-format
msgctxt "@info"
msgid "This option changes the size in which thumbnails are generated. You need to restart digiKam for this option to take effect. Furthermore, you need to regenerate all already stored thumbnails via the <interface>Tools / Maintenance</interface> menu."
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupcategory.cpp:91
#, kde-format
msgid "Manage categories to sort and re-arrange album tree-view."
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupcategory.cpp:100
#, kde-format
msgid "You can add or remove Album category types here to improve how your Albums are sorted in digiKam."
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupcategory.cpp:106
#: utilities/setup/camera/setupcamera.cpp:315
#: utilities/setup/camera/setupcamera.cpp:431
#: utilities/setup/setuptemplate.cpp:123
#, kde-format
msgid "&Add..."
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupmime.cpp:93
#, kde-format
msgid ""
"<p>Add new file types to show as album items. "
"<p>digiKam attempts to support all of the image formats that digital cameras produce, while being able to handle a few other important video and audio formats.</p>"
" "
"<p>You can add to the already-appreciable list of formats that digiKam handles by adding the extension of the type you want to add. Multiple extensions need to be separated by a semicolon or space.</p>"
"<p><b><u>Note:</u> changes done in this view will perform a database rescan in the background.</b></p>"
"<p>Here you can add the extensions of image files (including RAW files) to be displayed in the Album view. Just put \"xyz abc\" to display files with the xyz and abc extensions in your Album view.</p>"
"<p>You can also remove file formats that are shown by default by putting a minus sign in front of the extension: e.g. \"-gif\" would remove all GIF files from your Album view and any trace of them in your database. They would not be deleted, just not shown in digiKam.</p>"
"<p><b>Warning:</b> Removing files from the database means losing all of their tags and ratings.</p>"
"<p>Here you can add extra extensions of video files to be displayed in your Album view. Just write \"xyz abc\" to support files with the *.xyz and *.abc extensions. Clicking on these files will play them in an embedded movie player.</p>"
"<p>You can also remove file formats that are supported by default by putting a minus sign in front of the extension: e.g. \"-avi\" would remove all AVI files from your Album view and any trace of them in your database. They would not be deleted, just not shown in digiKam.</p>"
"<p><b>Warning:</b> Removing files from the database means losing all of their tags and ratings.</p>"
"<p>Here you can add extra extensions of audio files to be displayed in your Album view. Just write \"xyz abc\" to support files with the *.xyz and *.abc extensions. Clicking on these files will play them in an embedded audio player.</p>"
"<p>You can also remove file formats that are supported by default by putting a minus sign in front of the extension: e.g. \"-ogg\" would remove all OGG files from your Album view and any trace of them in your database. They would not be deleted, just not shown in digiKam.</p>"
"<p><b>Warning:</b> Removing files from the database means losing all of their tags and ratings.</p>"
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupmime.cpp:195
#, kde-format
msgid "Enter additional audio file extensions."
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupmime.cpp:258
#, kde-format
msgid ""
"<p>You have chosen to remove the following image formats from the list of supported formats: <b>%1</b>.</p>"
"<p>These are very common formats. If you have images in your collection with these formats, they will be removed from the database and you will lose all information about them, including rating and tags.</p>"
"<p>Are you sure you want to apply your changes and lose the support for these formats?</p>"
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupmime.cpp:307
#, kde-format
msgid ""
"<p>Files with these extensions will be recognized as images and included into the database:<br/>"
" <code>%1</code></p>"
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupmime.cpp:317
#, kde-format
msgid ""
"<p>Files with these extensions will be recognized as movie files and included into the database:<br/>"
" <code>%1</code></p>"
msgstr ""
#. +> trunk5
#: utilities/setup/album/setupmime.cpp:327
#, kde-format
msgid ""
"<p>Files with these extensions will be recognized as audio files and included into the database:<br/>"
" <code>%1</code></p>"
msgstr ""
#. +> trunk5
#: utilities/setup/camera/cameralist.cpp:278
#, kde-format
msgid "Failed to auto-detect camera; please make sure it is connected properly and is turned on. Would you like to try again?"
msgstr ""
#. +> trunk5
#: utilities/setup/camera/cameraselection.cpp:113
#, kde-format
msgid "Camera Configuration"
msgstr ""
#. i18n!
#. +> trunk5
#: utilities/setup/camera/cameraselection.cpp:122
#, kde-format
msgid "Mounted Camera"
msgstr ""
#. +> trunk5
#: utilities/setup/camera/cameraselection.cpp:138
#, kde-format
msgid "Camera List"
msgstr ""
#. +> trunk5
#: utilities/setup/camera/cameraselection.cpp:139
#, kde-format
msgid ""
"<p>Select the camera name that you want to use here. All default settings on the right panel will be set automatically.</p>"
"<p>This list has been generated using the gphoto2 library installed on your computer.</p>"
msgstr ""
#. +> trunk5
#: utilities/setup/camera/cameraselection.cpp:148
#, kde-format
msgid "Camera Title"
msgstr ""
#. +> trunk5
#: utilities/setup/camera/cameraselection.cpp:151
#, kde-format
msgid "<p>Set here the name used in digiKam interface to identify this camera.</p>"
msgstr ""
#. +> trunk5
#: utilities/setup/camera/cameraselection.cpp:160
#, kde-format
msgid "Camera Port Type"
msgstr ""
#. +> trunk5
#: utilities/setup/camera/cameraselection.cpp:165
#, kde-format
msgid "USB"
msgstr ""
#. +> trunk5
#: utilities/setup/camera/cameraselection.cpp:166
#, kde-format
msgid "<p>Select this option if your camera is connected to your computer using a USB cable.</p>"
msgstr ""
#. +> trunk5
#: utilities/setup/camera/cameraselection.cpp:169
#, kde-format
msgid "Serial"
msgstr ""
#. +> trunk5
#: utilities/setup/camera/cameraselection.cpp:170
#, kde-format
msgid "<p>Select this option if your camera is connected to your computer using a serial cable.</p>"
msgstr ""
#. +> trunk5
#: utilities/setup/camera/cameraselection.cpp:173
#, kde-format
msgid "Network"
msgstr ""
#. +> trunk5
#: utilities/setup/camera/cameraselection.cpp:174
#, kde-format
msgid "<p>Select this option if your camera is connected to your computer network.</p>"
msgstr ""
#. +> trunk5
#: utilities/setup/camera/cameraselection.cpp:179
#, kde-format
msgid "<p>Select the serial port to use on your computer here. This option is only required if you use a serial camera.</p>"
msgstr ""
#. +> trunk5
#: utilities/setup/camera/cameraselection.cpp:183
#, kde-format
msgid "<p>Enter here the network address of your camera.</p>"
msgstr ""
#. +> trunk5
#: utilities/setup/camera/cameraselection.cpp:201
#, kde-format
msgid "Camera Mount Path"
msgstr ""
#. +> trunk5
#: utilities/setup/camera/cameraselection.cpp:205
#, kde-format
msgid "Note: only for USB/IEEE mass storage cameras."
msgstr ""
#. +> trunk5
#: utilities/setup/camera/cameraselection.cpp:210
#, kde-format
msgid "<p>Set here the mount path to use on your computer. This option is only required if you use a <b>USB Mass Storage</b> camera.</p>"
msgstr ""
#. +> trunk5
#: utilities/setup/camera/cameraselection.cpp:228
#, kde-format
msgid ""
"<p>To set a <b>USB Mass Storage</b> camera<br/>"
"(which looks like a removable drive when mounted<br/>"
"on your desktop), please use<br/>"
"<a href=\"umscamera\">%1</a> from the camera list.</p>"
msgstr ""
#. +> trunk5
#: utilities/setup/camera/cameraselection.cpp:235
#, kde-format
msgid ""
"<p>To set a <b>Generic PTP USB Device</b><br/>"
"(which uses Picture Transfer Protocol), please<br/>"
"use <a href=\"ptpcamera\">%1</a> from the camera list.</p>"
msgstr ""
#. +> trunk5
#: utilities/setup/camera/cameraselection.cpp:241
#, kde-format
msgid ""
"<p>To set a <b>Generic PTP/IP Network Device</b><br/>"
"(which uses Picture Transfer Protocol), please<br/>"
"use <a href=\"ptpipcamera\">%1</a> from the camera list.</p>"
msgstr ""
#. +> trunk5
#: utilities/setup/camera/cameraselection.cpp:248
#, kde-format
msgid ""
"<p>A complete list of camera settings to use is<br/>"
"available at <a href='http://www.teaser.fr/~hfiguiere/linux/digicam.html'>this URL</a>.</p>"
msgstr ""
#. +> trunk5
#: utilities/setup/camera/importfilters.cpp:91
#, kde-format
msgid "Edit Import Filters"
msgstr ""
#. +> trunk5
#: utilities/setup/camera/importfilters.cpp:109
#, kde-format
msgid "Mime filter:"
msgstr ""
#. +> trunk5
#: utilities/setup/camera/importfilters.cpp:117
#, kde-format
msgid "Select Type Mime..."
msgstr ""
#. +> trunk5
#: utilities/setup/camera/importfilters.cpp:122
#, kde-format
msgid "File name filter:"
msgstr ""
#. +> trunk5
#: utilities/setup/camera/importfilters.cpp:132
#, kde-format
msgid "Path filter:"
msgstr ""
#. +> trunk5
#: utilities/setup/camera/importfilters.cpp:142
#, kde-format
msgid "Show only new files"
msgstr ""
#. +> trunk5
#: utilities/setup/camera/importfilters.cpp:213
#, kde-format
msgid "Select the MimeTypes you want for this filter."
msgstr ""
#. +> trunk5
#: utilities/setup/camera/importfilters.cpp:215
#, kde-format
msgid "Select Mime Types"
msgstr ""
#. +> trunk5
#: utilities/setup/camera/setupcamera.cpp:294
#, kde-format
msgid "Here you can see the digital camera list used by digiKam via the Gphoto interface."
#. d->iconShowResolutionBox->setWhatsThis(i18n("Set this option to show the image size in pixels "
#. "below the image thumbnail."));
#.
#. +> trunk5
#: utilities/setup/camera/setupcamera.cpp:477
#, kde-format
msgid "Show image Format"
msgstr ""
#. +> trunk5
#: utilities/setup/camera/setupcamera.cpp:484
#, kde-format
msgid "Set this option to show the digiKam tags below the image thumbnail."
msgstr ""
#. +> trunk5
#: utilities/setup/camera/setupcamera.cpp:487
#, kde-format
msgid "Show item &rating"
msgstr ""
#. +> trunk5
#: utilities/setup/camera/setupcamera.cpp:488
#, kde-format
msgid "Set this option to show the item rating below the image thumbnail."
msgstr ""
#. +> trunk5
#: utilities/setup/camera/setupcamera.cpp:492
#, kde-format
msgid "Set this option to show overlay buttons on the image thumbnail for image rotation."
msgstr ""
#. +> trunk5
#: utilities/setup/camera/setupcamera.cpp:497
#, kde-format
msgid "Show embedded preview"
msgstr ""
#. +> trunk5
#: utilities/setup/camera/setupcamera.cpp:502
#, kde-format
msgid "Select here the font used to display text in Icon Views."
msgstr ""
#. +> trunk5
#: utilities/setup/camera/setupcamera.cpp:522
#, kde-format
msgid "Preview Options"
msgstr ""
#. +> trunk5
#: utilities/setup/camera/setupcamera.cpp:525
#, kde-format
msgid "Embedded preview loads full-sized images"
msgstr ""
#. +> trunk5
#: utilities/setup/camera/setupcamera.cpp:526
#, kde-format
msgid ""
"<p>Set this option to load images at their full size for preview, rather than at a reduced size. As this option will make it take longer to load images, only use it if you have a fast computer.</p>"
"<p><b>Note:</b> for Raw images, a half size version of the Raw data is used instead of the embedded JPEG preview.</p>"
msgstr ""
#. +> trunk5
#: utilities/setup/camera/setupcamera.cpp:533
#, kde-format
msgid "Preview each item while downloading it"
msgstr ""
#. +> trunk5
#: utilities/setup/camera/setupcamera.cpp:534
#, kde-format
msgid "<p>Set this option to preview each item while downloading.</p>"
msgstr ""
#. +> trunk5
#: utilities/setup/camera/setupcamera.cpp:537
#, kde-format
msgid "Uncheck this if you don't want to see icons and text in the image preview."
msgstr ""
#. +> trunk5
#: utilities/setup/camera/setupcamera.cpp:556
#, kde-format
msgid "Import Window"
msgstr ""
#. +> trunk5
#: utilities/setup/camera/setupcamera.cpp:806
#, kde-format
msgid "No default target album have been selected to process download from camera device. Please select one."
msgstr ""
#. +> trunk5
#: utilities/setup/camera/setupcamera.cpp:894
#, kde-format
msgid "Device detection under progress, please wait..."
msgstr ""
#. +> trunk5
#: utilities/setup/camera/setupcamera.cpp:905
#, kde-format
msgid ""
"Failed to auto-detect camera.\n"
"Please check if your camera is turned on and retry or try setting it manually."
msgstr ""
#. +> trunk5
#: utilities/setup/camera/setupcamera.cpp:919
#, kde-format
msgid "Camera '%1' (%2) is already in list."
msgstr ""
#. +> trunk5
#: utilities/setup/camera/setupcamera.cpp:923
#, kde-format
msgid "Found camera '%1' (%2) and added it to the list."
msgstr ""
#. +> trunk5
#: utilities/setup/camera/setupcamera.cpp:939
#, kde-format
msgid "Untitled"
msgstr ""
#. +> trunk5
#: utilities/setup/camera/setupcamera.cpp:999
#, kde-format
msgid "In order to enable this feature, the full-sized preview will be disabled."
msgstr ""
#. +> trunk5
#: utilities/setup/camera/setupcamera.cpp:1009
#, kde-format
msgid "If the full-sized preview is enabled it will affect the speed of previewing each item while download."
msgid "If this option is enabled, over- and under-exposure indicators will be displayed only when pure white and pure black color matches, as all color components match the condition in the same time. Otherwise, indicators are turned on when one of the color components matches the condition."
msgid "Show Settings Dialog when Saving Image Files"
msgstr ""
#. +> trunk5
#: utilities/setup/editor/setupiofiles.cpp:133
#, kde-format
msgid ""
"<ul>"
"<li>Checked: A dialog where settings can be changed when saving image files</li>"
"<li>Unchecked: Default settings are used when saving image files</li>"
"</ul>"
msgstr ""
#. +> trunk5
#: utilities/setup/editor/setupraw.cpp:95
#, kde-format
msgctxt "@info"
msgid ""
"<p>A <i>raw image file</i> contains minimally processed data from the image sensor of a digital camera.</p>"
"<p>Opening a raw file requires extensive data interpretation and processing.</p>"
msgstr ""
#. +> trunk5
#: utilities/setup/editor/setupraw.cpp:113
#, kde-format
msgctxt "@label"
msgid "Open raw files in the image editor"
msgstr ""
#. +> trunk5
#: utilities/setup/editor/setupraw.cpp:116
#, kde-format
msgctxt "@option:radio Open raw files..."
msgid "Fast and simple, as 8 bit image"
msgstr ""
#. +> trunk5
#: utilities/setup/editor/setupraw.cpp:118
#, kde-format
msgctxt "@option:radio Open raw files..."
msgid "Using the default settings, in 16 bit"
msgstr ""
#. +> trunk5
#: utilities/setup/editor/setupraw.cpp:120
#, kde-format
msgctxt "@option:radio Open raw files..."
msgid "Always open the Raw Import Tool to customize settings"
msgstr ""
#. +> trunk5
#: utilities/setup/editor/setupraw.cpp:150
#, kde-format
msgctxt "@title:tab"
msgid "RAW Behavior"
msgstr ""
#. +> trunk5
#: utilities/setup/editor/setupraw.cpp:151
#, kde-format
msgctxt "@title:tab"
msgid "RAW Default Settings"
msgstr ""
#. +> trunk5
#: utilities/setup/editor/setupversioning.cpp:122
#, kde-format
msgid "Enable Non-Destructive Editing and Versioning"
msgstr ""
#. +> trunk5
#: utilities/setup/editor/setupversioning.cpp:124
#, kde-format
msgctxt "@info:tooltip"
msgid "Enable support for non-destructive editing and image versioning"
msgstr ""
#. +> trunk5
#: utilities/setup/editor/setupversioning.cpp:126
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<para><interface>Non-Destructive Editing and Versioning</interface> allows different versions of an image to be created, whilst always preserving the original image.</para>"
" "
"<para> All steps of the editing history are recorded and can be accessed later.</para>"
msgstr ""
#. +> trunk5
#: utilities/setup/editor/setupversioning.cpp:136
#, kde-format
msgctxt "@info:tooltip"
msgid "Get information on non-destructive editing and file versioning"
msgstr ""
#. +> trunk5
#: utilities/setup/editor/setupversioning.cpp:145
#, kde-format
msgctxt "@title:group"
msgid "Workspace File Format"
msgstr ""
#. +> trunk5
#: utilities/setup/editor/setupversioning.cpp:150
#, kde-format
msgctxt "@label"
msgid "Save files as"
msgstr ""
#. +> trunk5
#: utilities/setup/editor/setupversioning.cpp:154
#, kde-format
msgctxt "@label:listbox"
msgid "JPEG"
msgstr ""
#. +> trunk5
#: utilities/setup/editor/setupversioning.cpp:155
#, kde-format
msgctxt "@label:listbox"
msgid "TIFF"
msgstr ""
#. +> trunk5
#: utilities/setup/editor/setupversioning.cpp:156
#, kde-format
msgctxt "@label:listbox"
msgid "PNG"
msgstr ""
#. +> trunk5
#: utilities/setup/editor/setupversioning.cpp:157
#, kde-format
msgctxt "@label:listbox"
msgid "PGF"
msgstr ""
#. +> trunk5
#: utilities/setup/editor/setupversioning.cpp:158
#, kde-format
msgctxt "@label:listbox"
msgid "JPEG 2000"
msgstr ""
#. +> trunk5
#: utilities/setup/editor/setupversioning.cpp:163
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Default File Format for Saving</title>"
"<para>Select the file format in which edited images are saved automatically. Format-specific options, like compression settings, can be configured on the <interface>Format Options</interface> tab.</para>"
"<para>"
"<list>"
"<item><emphasis strong='true'>JPEG</emphasis>: JPEG is the most commonly used file format, but it employs lossy compression, which means that with each saving operation some image information will be irreversibly lost. JPEG offers a good compression rate, resulting in smaller files. </item>"
"<item><emphasis strong='true'>PNG</emphasis>: A widely used format employing lossless compression. The files, though, will be larger because PNG does not achieve very good compression rates.</item>"
"<item><emphasis strong='true'>TIFF</emphasis>: A commonly used format, usually uncompressed or with modest lossless compression. Resulting files will be large, but without quality loss due to compression. </item>"
"<item><emphasis strong='true'>PGF</emphasis>: This is a technically superior file format offering good compression rates with either lossy or lossless compression. But it is not yet widely used and supported, so your friends may not directly be able to open these files, and you may not be able to directly publish them on the web. </item>"
"<item><emphasis strong='true'>JPEG 2000</emphasis>: JPEG 2000 is similar to PGF. Loading or saving is slower, the compression rate is better, and the format more widely supported, though still not comparable to the tradition formats JPEG, PNG or TIFF. </item>"
"</list>"
"</para>"
msgstr ""
#. +> trunk5
#: utilities/setup/editor/setupversioning.cpp:204
#, kde-format
msgctxt "@info:tooltip"
msgid "Get information on available image file formats"
msgstr ""
#. +> trunk5
#: utilities/setup/editor/setupversioning.cpp:221
#, kde-format
msgctxt "@label"
msgid "When closing the editor"
msgstr ""
#. +> trunk5
#: utilities/setup/editor/setupversioning.cpp:224
#, kde-format
msgctxt "@option:radio"
msgid "Always ask to save changes"
msgstr ""
#. +> trunk5
#: utilities/setup/editor/setupversioning.cpp:225
#, kde-format
msgctxt "@option:radio"
msgid "Save changes automatically"
msgstr ""
#. +> trunk5
#: utilities/setup/editor/setupversioning.cpp:257
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<para>First and foremost, the <emphasis>original image will never be overwritten.</emphasis> Instead, when an image is edited, a new file is created: The <interface>current version</interface>.</para>"
" "
"<para>You can also create multiple <interface>versions</interface> deriving from the same <interface>original image</interface>.</para>"
" "
"<para>In addition to these files representing a current version, digiKam can take and keep additional, <interface>intermediate snapshots</interface> during the editing process. This can be useful if you want to preserve the intermediate steps for later access, for example if some editing steps cannot be automatically reproduced.</para>"
msgstr ""
#. +> trunk5
#: utilities/setup/editor/setupversioning.cpp:272
#, kde-format
msgctxt "@label"
msgid "Keep a snapshot of an edited image"
msgstr ""
#. +> trunk5
#: utilities/setup/editor/setupversioning.cpp:276
#: utilities/setup/editor/setupversioning.cpp:320
#, kde-format
msgctxt "@info:tooltip"
msgid "Get an explanation for these options"
msgstr ""
#. +> trunk5
#: utilities/setup/editor/setupversioning.cpp:278
#, kde-format
msgctxt "@option:check"
msgid "After converting from a RAW image"
msgstr ""
#. +> trunk5
#: utilities/setup/editor/setupversioning.cpp:279
#, kde-format
msgctxt "@option:check"
msgid "After each editing session"
msgstr ""
#. +> trunk5
#: utilities/setup/editor/setupversioning.cpp:280
#, kde-format
msgctxt "@option:check"
msgid "After each step that is not completely reproducible"
msgstr ""
#. +> trunk5
#: utilities/setup/editor/setupversioning.cpp:307
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<para>If an image has been edited, only the <interface>current versions</interface> will be shown in the main thumbnail view. From the <interface>right sidebar</interface>, you always have access to all hidden files.</para>"
" "
"<para>With the options here, you can choose to show certain files permanently.</para>"
msgid "Only one character is now supported as tag path separator"
msgstr ""
#. +> trunk5
#: utilities/setup/metadata/setupmetadata.cpp:170
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<para>In addition to the pixel content, image files usually contain a variety of metadata. A lot of the parameters you can use in digiKam to manage files, such as rating or comment, can be written to the files' metadata.</para>"
" "
"<para>Storing in metadata allows one to preserve this information when moving or sending the files to different systems.</para>"
msgstr ""
#. +> trunk5
#: utilities/setup/metadata/setupmetadata.cpp:180
#, kde-format
msgctxt "@label"
msgid "Write This Information to the Metadata"
msgstr ""
#. +> trunk5
#: utilities/setup/metadata/setupmetadata.cpp:183
#, kde-format
msgctxt "@option:check"
msgid "Image tags"
msgstr ""
#. +> trunk5
#: utilities/setup/metadata/setupmetadata.cpp:184
#, kde-format
msgctxt "@info:whatsthis"
msgid "Turn on this option to store the image tags in the XMP and IPTC tags."
msgstr ""
#. +> trunk5
#: utilities/setup/metadata/setupmetadata.cpp:188
#, kde-format
msgctxt "@option:check"
msgid "Captions and title"
msgstr ""
#. +> trunk5
#: utilities/setup/metadata/setupmetadata.cpp:189
#, kde-format
msgctxt "@info:whatsthis"
msgid "Turn on this option to store image caption and title in the JFIF Comment section, the EXIF tag, the XMP tag, and the IPTC tag."
msgstr ""
#. +> trunk5
#: utilities/setup/metadata/setupmetadata.cpp:194
#, kde-format
msgctxt "@option:check"
msgid "Rating"
msgstr ""
#. +> trunk5
#: utilities/setup/metadata/setupmetadata.cpp:195
#, kde-format
msgctxt "@info:whatsthis"
msgid "Turn on this option to store the image rating in the EXIF tag and the XMP tags."
msgstr ""
#. +> trunk5
#: utilities/setup/metadata/setupmetadata.cpp:199
#, kde-format
msgctxt "@option:check"
msgid "Pick label"
msgstr ""
#. +> trunk5
#: utilities/setup/metadata/setupmetadata.cpp:200
#, kde-format
msgctxt "@info:whatsthis"
msgid "Turn on this option to store the image pick label in the XMP tags."
msgstr ""
#. +> trunk5
#: utilities/setup/metadata/setupmetadata.cpp:204
#, kde-format
msgctxt "@option:check"
msgid "Color label"
msgstr ""
#. +> trunk5
#: utilities/setup/metadata/setupmetadata.cpp:205
#, kde-format
msgctxt "@info:whatsthis"
msgid "Turn on this option to store the image color label in the XMP tags."
msgstr ""
#. +> trunk5
#: utilities/setup/metadata/setupmetadata.cpp:209
#, kde-format
msgctxt "@option:check"
msgid "Timestamps"
msgstr ""
#. +> trunk5
#: utilities/setup/metadata/setupmetadata.cpp:210
#, kde-format
msgctxt "@info:whatsthis"
msgid "Turn on this option to store the image date and time in the EXIF, XMP, and IPTC tags."
msgstr ""
#. +> trunk5
#: utilities/setup/metadata/setupmetadata.cpp:214
#, kde-format
msgctxt "@option:check"
msgid "Metadata templates (Copyright etc.)"
msgstr ""
#. +> trunk5
#: utilities/setup/metadata/setupmetadata.cpp:215
#, kde-format
msgctxt "@info:whatsthis"
msgid "Turn on this option to store the metadata template in the XMP and the IPTC tags. You can set template values to Template setup page."
msgstr ""
#. +> trunk5
#: utilities/setup/metadata/setupmetadata.cpp:219
#, kde-format
msgctxt "@option:check"
msgid "Face Tags (including face areas)"
msgstr ""
#. +> trunk5
#: utilities/setup/metadata/setupmetadata.cpp:220
#, kde-format
msgctxt "@info:whatsthis"
msgid "Turn on this option to store face tags with face rectangles in the XMP tags."
msgstr ""
#. +> trunk5
#: utilities/setup/metadata/setupmetadata.cpp:244
#, kde-format
msgctxt "@label"
msgid "Reading and Writing Metadata"
msgstr ""
#. +> trunk5
#: utilities/setup/metadata/setupmetadata.cpp:247
#, kde-format
msgctxt "@option:check"
msgid "Use lazy synchronization"
msgstr ""
#. +> trunk5
#: utilities/setup/metadata/setupmetadata.cpp:249
#, kde-format
msgctxt "@info:whatsthis"
msgid "Instead of synchronizing metadata, just schedule it for synchronization.Synchronization can be done later by triggering the apply pending, or at digikam exit"
msgstr ""
#. +> trunk5
#: utilities/setup/metadata/setupmetadata.cpp:252
#, kde-format
msgctxt "@option:check"
msgid "If possible write Metadata to RAW files (experimental)"
msgstr ""
#. +> trunk5
#: utilities/setup/metadata/setupmetadata.cpp:253
#, kde-format
msgctxt "@info:whatsthis"
msgid "Turn on this option to write metadata into RAW TIFF/EP files. This feature requires the Exiv2 shared library, version >= 0.18.0. It is still experimental, and is disabled by default."
msgstr ""
#. +> trunk5
#: utilities/setup/metadata/setupmetadata.cpp:259
#, kde-format
msgctxt "@option:check"
msgid "&Update file timestamp when files are modified"
msgstr ""
#. +> trunk5
#: utilities/setup/metadata/setupmetadata.cpp:261
#, kde-format
msgctxt "@info:whatsthis"
msgid "Turn off this option to not update file timestamps when files are changed as when you update metadata or image data. Note: disabling this option can introduce some dysfunctions with applications which use file timestamps properties to detect file modifications automatically."
msgstr ""
#. +> trunk5
#: utilities/setup/metadata/setupmetadata.cpp:266
#, kde-format
msgctxt "@option:check"
msgid "&Rescan file when files are modified"
msgstr ""
#. +> trunk5
#: utilities/setup/metadata/setupmetadata.cpp:268
#, kde-format
msgctxt "@info:whatsthis"
msgid "Turning this option on, will force digiKam to rescan files that has been modified outside digiKam. If a file has changed it's file size or if the last modified timestamp has changed, a rescan of that file will be performed when digiKam starts."
msgstr ""
#. +> trunk5
#: utilities/setup/metadata/setupmetadata.cpp:325
#, kde-format
msgctxt "@title:tab"
msgid "Behavior"
msgstr ""
#. +> trunk5
#: utilities/setup/metadata/setupmetadata.cpp:335
#, kde-format
msgctxt "@label"
msgid "When rotating a file"
msgstr ""
#. +> trunk5
#: utilities/setup/metadata/setupmetadata.cpp:339
#, kde-format
msgctxt "@option:radio"
msgid "Rotate by only setting a flag"
msgstr ""
#. +> trunk5
#: utilities/setup/metadata/setupmetadata.cpp:340
#, kde-format
msgctxt "@option:radio"
msgid "Rotate by changing the content if possible"
msgstr ""
#. +> trunk5
#: utilities/setup/metadata/setupmetadata.cpp:341
#, kde-format
msgctxt "@option:check"
msgid "Even allow lossy rotation if necessary"
msgstr ""
#. +> trunk5
#: utilities/setup/metadata/setupmetadata.cpp:342
#, kde-format
msgctxt "@option:check"
msgid "Write flag to metadata if possible"
msgstr ""
#. +> trunk5
#: utilities/setup/metadata/setupmetadata.cpp:354
#, kde-format
msgctxt "@info:tooltip"
msgid "Rotate files only by changing a flag, not touching the pixel data"
msgstr ""
#. +> trunk5
#: utilities/setup/metadata/setupmetadata.cpp:356
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<para>A file can be rotated in two ways:<nl/>"
" You can change the contents, rearranging the individual pixels of the image data.<nl/>"
" Or you can set a flag that the file is to be rotated before it is shown.</para>"
" "
"<para>Select this option if you always want to set only a flag. This is less obtrusive, but requires support if the file is accessed with another software. Ensure to allow setting the flag in the metadata if you want to share your files outside digiKam.</para>"
msgstr ""
#. +> trunk5
#: utilities/setup/metadata/setupmetadata.cpp:365
#, kde-format
msgctxt "@info:tooltip"
msgid "If possible rotate files by changing the pixel data"
msgstr ""
#. +> trunk5
#: utilities/setup/metadata/setupmetadata.cpp:367
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<para>A file can be rotated in two ways:<nl/>"
" You can change the contents, rearranging the individual pixels of the image data.<nl/>"
" Or you can set a flag that the file is to be rotated before it is shown.</para>"
" "
"<para>Select this option if you want the file to be rotated by changing the content. This is a lossless operation for JPEG files. For other formats it is a lossy operation, which you need to enable explicitly. It is not support for RAW and other read-only formats, which will be rotated by flag only.</para>"
msgstr ""
#. +> trunk5
#: utilities/setup/metadata/setupmetadata.cpp:377
#, kde-format
msgctxt "@info:tooltip"
msgid "Rotate files by changing the pixel data even if the operation will incur quality loss"
msgstr ""
#. +> trunk5
#: utilities/setup/metadata/setupmetadata.cpp:379
#, kde-format
msgctxt "@info:whatsthis"
msgid "For some file formats which apply lossy compression, data will be lost each time the content is rotated. Check this option to allow lossy rotation. If not enabled, these files will be rotated by flag."
msgstr ""
#. +> trunk5
#: utilities/setup/metadata/setupmetadata.cpp:385
#, kde-format
msgctxt "@info:tooltip"
msgid "When rotating a file by setting a flag, also change this flag in the file's metadata"
msgstr ""
#. +> trunk5
#: utilities/setup/metadata/setupmetadata.cpp:387
#, kde-format
msgctxt "@info:whatsthis"
msgid "File metadata typically contains a flag describing that a file shall be shown rotated. Enable this option to allow editing this field. "
msgstr ""
#. +> trunk5
#: utilities/setup/metadata/setupmetadata.cpp:429
#, kde-format
msgctxt "@title:tab"
msgid "Rotation"
msgstr ""
#. +> trunk5
#: utilities/setup/metadata/setupmetadata.cpp:436
#, kde-format
msgctxt "@info:label"
msgid "Select Metadata Fields to Be Displayed"
msgstr ""
#. +> trunk5
#: utilities/setup/metadata/setupmetadata.cpp:450
#, kde-format
msgctxt "@title:tab"
msgid "Views"
msgstr ""
#. +> trunk5
#: utilities/setup/metadata/setupmetadata.cpp:459
#, kde-format
msgid "Baloo Desktop Search"
msgstr ""
#. +> trunk5
#: utilities/setup/metadata/setupmetadata.cpp:463
#, kde-format
msgid "Store metadata from digiKam in Baloo"
msgstr ""
#. +> trunk5
#: utilities/setup/metadata/setupmetadata.cpp:464
#, kde-format
msgid "Turn on this option to push rating, comments and tags from digiKam into the Baloo storage"
msgstr ""
#. +> trunk5
#: utilities/setup/metadata/setupmetadata.cpp:468
#, kde-format
msgid "Read metadata from Baloo"
msgstr ""
#. +> trunk5
#: utilities/setup/metadata/setupmetadata.cpp:469
#, kde-format
msgid "Turn on this option if you want to apply changes to rating, comments and tags made in Baloo to digiKam's metadata storage. Please note that image metadata will not be edited automatically."
msgstr ""
#. +> trunk5
#: utilities/setup/metadata/setupmetadata.cpp:476
#, kde-format
msgctxt "@title:tab"
msgid "Baloo"
msgstr ""
#. +> trunk5
#: utilities/setup/metadata/setupmetadata.cpp:492
#, kde-format
msgid ""
"<p><a href='http://community.kde.org/Baloo'>Baloo</a> provides the basis to handle all kinds of metadata on the KDE desktop in a generic fashion. It allows you to tag, rate and comment your files in KDE applications like Dolphin.</p>"
" "
"<p>Please set here if you want to synchronize the metadata stored by digiKam desktop-wide with the Baloo Desktop Search.</p>"
" "
msgstr ""
#. +> trunk5
#: utilities/setup/metadata/setupmetadata.cpp:530
#, kde-format
msgctxt "@label"
msgid "Reading and Writing to Sidecars"
msgstr ""
#. +> trunk5
#: utilities/setup/metadata/setupmetadata.cpp:533
#, kde-format
msgctxt "@option:check"
msgid "Read from sidecar files"
msgstr ""
#. +> trunk5
#: utilities/setup/metadata/setupmetadata.cpp:535
#, kde-format
msgctxt "@info:whatsthis"
msgid "Turn on this option to read metadata from XMP sidecar files when reading metadata."
msgstr ""
#. +> trunk5
#: utilities/setup/metadata/setupmetadata.cpp:539
#, kde-format
msgctxt "@option:check"
msgid "Write to sidecar files"
msgstr ""
#. +> trunk5
#: utilities/setup/metadata/setupmetadata.cpp:541
#, kde-format
msgctxt "@info:whatsthis"
msgid "Turn on this option to save, as specified, metadata to XMP sidecar files."
msgstr ""
#. +> trunk5
#: utilities/setup/metadata/setupmetadata.cpp:545
#, kde-format
msgid "Write to XMP sidecar for read-only image only"
msgstr ""
#. +> trunk5
#: utilities/setup/metadata/setupmetadata.cpp:546
#, kde-format
msgid "Write to XMP sidecar only"
msgstr ""
#. +> trunk5
#: utilities/setup/metadata/setupmetadata.cpp:547
#, kde-format
msgid "Write to image and XMP Sidecar"
msgstr ""
#. +> trunk5
#: utilities/setup/metadata/setupmetadata.cpp:548
#, kde-format
msgctxt "@info:tooltip"
msgid "Specify the exact mode of XMP sidecar writing"
msgstr ""
#. +> trunk5
#: utilities/setup/metadata/setupmetadata.cpp:567
#, kde-format
msgid ""
"<p>Add file types to be recognised as sidecars.</p>"
"<p>digiKam (optionally) writes metadata to *.xmp sidecar files. Other programs might use different types, which can be specified below. digiKam will neither display these nor read from or write to them. But whenever a matching album item (e.g. \"image.dng\" for \"image.dng.pp3\") is renamed, moved, copied or deleted, the same operation will be done on these sidecar files.</p>"
"<p>Multiple extensions must be separated by a semicolon or a space.</p>"
msgstr ""
#. +> trunk5
#: utilities/setup/metadata/setupmetadata.cpp:583
#, kde-format
msgid "<p>Here you can add extra extensions of sidecars files to be processed alongside regular items. These files won't be visible, but regarded as an extension of the main file. Just write \"xyz abc\" to support files with the *.xyz and *.abc extensions. The internally used sidecars type *.xmp is always included.</p>"
msgid "Switching off exif auto rotation will most probably show your images in a wrong orientation, so only change this option if you explicitly require this. Furthermore, you need to regenerate all already stored thumbnails via the <interface>Tools / Maintenance</interface> menu."
msgstr ""
#. +> trunk5
#: utilities/setup/setup.cpp:164
#, kde-format
msgid "Database"
msgstr ""
#. +> trunk5
#: utilities/setup/setup.cpp:165
#, kde-format
msgid ""
"<qt>Database Settings<br/>"
"<i>Customize database settings</i></qt>"
msgstr ""
#. +> trunk5
#: utilities/setup/setup.cpp:170
#, kde-format
msgid "Collections"
msgstr ""
#. +> trunk5
#: utilities/setup/setup.cpp:171
#, kde-format
msgid ""
"<qt>Collections Settings<br/>"
"<i>Set root albums locations</i></qt>"
msgstr ""
#. +> trunk5
#: utilities/setup/setup.cpp:177
#, kde-format
msgid ""
"<qt>Application Views Settings<br/>"
"<i>Customize the look of the views</i></qt>"
msgstr ""
#. +> trunk5
#: utilities/setup/setup.cpp:182
#, kde-format
msgid "Tool-Tip"
msgstr ""
#. +> trunk5
#: utilities/setup/setup.cpp:183
#, kde-format
msgid ""
"<qt>Items Tool-Tip Settings<br/>"
"<i>Customize information in item tool-tips</i></qt>"
msgstr ""
#. +> trunk5
#: utilities/setup/setup.cpp:194
#, kde-format
msgid "Templates"
msgstr ""
#. +> trunk5
#: utilities/setup/setup.cpp:195
#, kde-format
msgid ""
"<qt>Metadata templates<br/>"
"<i>Manage your collection of metadata templates</i></qt>"
msgstr ""
#. +> trunk5
#: utilities/setup/setup.cpp:201
#, kde-format
msgid ""
"<qt>Image Editor Settings<br/>"
"<i>Customize the image editor settings</i></qt>"
msgstr ""
#. +> trunk5
#: utilities/setup/setup.cpp:207
#, kde-format
msgid ""
"<qt>Settings for Color Management<br/>"
"<i>Customize the color management settings</i></qt>"
msgstr ""
#. +> trunk5
#: utilities/setup/setup.cpp:213
#, kde-format
msgid ""
"<qt>Light Table Settings<br/>"
"<i>Customize tool used to compare images</i></qt>"
msgstr ""
#. +> trunk5
#: utilities/setup/setup.cpp:225
#, kde-format
msgid "<qt>Image Quality Sorter Settings<br/>"
msgstr ""
#. +> trunk5
#: utilities/setup/setup.cpp:230
#, kde-format
msgid ""
"<qt>Camera Settings<br/>"
"<i>Manage your camera devices</i></qt>"
msgstr ""
#. +> trunk5
#: utilities/setup/setup.cpp:246
#, kde-format
msgid "Plugins"
msgstr ""
#. +> trunk5
#: utilities/setup/setup.cpp:247
#, kde-format
msgid ""
"<qt>Main Interface Plug-in Settings<br/>"
"<i>Set which plugins will be accessible from the main interface</i></qt>"
msgstr ""
#. +> trunk5
#: utilities/setup/setup.cpp:255
#, kde-format
msgid ""
"<qt>Miscellaneous Settings<br/>"
"<i>Customize behavior of the other parts of digiKam</i></qt>"
msgstr ""
#. +> trunk5
#: utilities/setup/setup.cpp:451
#, kde-format
msgid ""
"The Exif auto-rotate thumbnails option has been changed.\n"
"Do you want to rebuild all albums' items' thumbnails now?\n"
"\n"
"Note: thumbnail processing can take a while. You can start this job later from the \"Tools-Maintenance\" menu."
msgstr ""
#. +> trunk5
#: utilities/setup/setupdatabase.cpp:114
#, kde-format
msgctxt "@title:tab"
msgid "Database Settings"
msgstr ""
#. +> trunk5
#: utilities/setup/setupdatabase.cpp:122
#, kde-format
msgid ""
"<p>Set the names of directories that you want to ignore from your photo collections. The names are case sensitive and should be separated by a semicolon.</p>"
"<p>This is for example useful when you store your photos on a Synology NAS (Network Attached Storage). In every directory the system creates a subdirectory @eaDir to store thumbnails. To avoid digiKam inserting the original photo and its corresponding thumbnail twice, @eaDir is ignored by default.</p>"
"<p>To re-include directories that are ignored by default prefix it with a minus, e.g. -@eaDir.</p>"
msgstr ""
#. +> trunk5
#: utilities/setup/setupdatabase.cpp:140
#, kde-format
msgid "Additional directories to ignore (<a href='image'>Currently ignored directories</a>):"
msgstr ""
#. +> trunk5
#: utilities/setup/setupdatabase.cpp:145
#, kde-format
msgid "Enter directories that you want to ignore from adding to your collections."
msgstr ""
#. +> trunk5
#: utilities/setup/setupdatabase.cpp:166
#, kde-format
msgctxt "@title:tab"
msgid "Ignored Directories"
msgstr ""
#. +> trunk5
#: utilities/setup/setupdatabase.cpp:262
#, kde-format
msgctxt "@info"
msgid ""
"<p>The process of updating the file hashes takes a few minutes.</p>"
" "
"<p>Please ensure that any important collections on removable media are connected. <i>After the upgrade you cannot use your database with a digiKam version prior to 2.0.</i></p>"
" "
"<p>Do you want to begin the update?</p>"
msgstr ""
#. +> trunk5
#: utilities/setup/setupdatabase.cpp:277
#, kde-format
msgctxt "@title:group"
msgid "Updates"
msgstr ""
#. +> trunk5
#: utilities/setup/setupdatabase.cpp:280
#, kde-format
msgctxt "@action:button"
msgid "Update File Hashes"
msgstr ""
#. +> trunk5
#: utilities/setup/setupdatabase.cpp:282
#, kde-format
msgctxt "@info:tooltip"
msgid ""
"<qt>File hashes are used to identify identical files and to display thumbnails. A new, improved algorithm to create the hash is now used. The old algorithm, though, still works quite well, so it is recommended to carry out this upgrade, but not required.<br>"
" After the upgrade you cannot use your database with a digiKam version prior to 2.0.</qt>"
msgstr ""
#. +> trunk5
#: utilities/setup/setupdatabase.cpp:291
#, kde-format
msgctxt "@info:tooltip"
msgid "Get information about <interface>Update File Hashes</interface>"
msgstr ""
#. +> trunk5
#: utilities/setup/setupdatabase.cpp:315
#, kde-format
msgid ""
"<p>Directories starting with a dot are ignored by default.<br/>"
" <code>%1</code></p>"
msgstr ""
#. +> trunk5
#: utilities/setup/setupicc.cpp:187
#, kde-format
msgid "Enable Color Management"
msgstr ""
#. +> trunk5
#: utilities/setup/setupicc.cpp:188
#, kde-format
msgid ""
"<ul>"
"<li>Checked: Color Management is enabled</li>"
"<li>Unchecked: Color Management is disabled</li>"
"</ul>"
msgstr ""
#. +> trunk5
#: utilities/setup/setupicc.cpp:195
#, kde-format
msgid "Visit Little CMS project website"
msgstr ""
#. +> trunk5
#: utilities/setup/setupicc.cpp:205
#, kde-format
msgid "Working Color Space"
msgstr ""
#. +> trunk5
#: utilities/setup/setupicc.cpp:211
#, kde-format
msgid "<p>This is the color space all the images will be converted to when opened (if you choose to convert) and the profile that will be embedded when saving. Good and safe choices are <b>Adobe RGB (1998)</b> and <b>sRGB IEC61966-2.1</b>"
msgstr ""
#. +> trunk5
#: utilities/setup/setupicc.cpp:217
#, kde-format
msgid "<p>You can use this button to get more detailed information about the selected workspace profile.</p>"
msgstr ""
#. +> trunk5
#: utilities/setup/setupicc.cpp:231
#, kde-format
msgid "When the profile of an image does not match the working color space"
msgid "<p>If an image has an embedded color profile not matching the working space profile, digiKam will ask if you want to convert to the working space, keep the embedded profile or discard the embedded profile and assign a different one.</p>"
msgstr ""
#. +> trunk5
#: utilities/setup/setupicc.cpp:246
#, kde-format
msgid "Convert the image to the working color space"
msgstr ""
#. +> trunk5
#: utilities/setup/setupicc.cpp:247
#, kde-format
msgid "<p>If an image has an embedded color profile not matching the working space profile, digiKam will convert the image's color information to the working color space. This changes the pixel data, but not the appearance of the image.</p>"
msgstr ""
#. +> trunk5
#: utilities/setup/setupicc.cpp:263
#, kde-format
msgid "When an image has no color profile information"
msgstr ""
#. +> trunk5
#: utilities/setup/setupicc.cpp:271
#, kde-format
msgid "<p>If an image has no embedded color profile, digiKam will ask which color space shall be used to interpret the image and to which color space it shall be transformed for editing.</p>"
msgstr ""
#. +> trunk5
#: utilities/setup/setupicc.cpp:275
#, kde-format
msgid "Assume it is using the sRGB color space (Internet standard)"
msgstr ""
#. i18n("<p></p>"));
#.
#. +> trunk5
#: utilities/setup/setupicc.cpp:280
#, kde-format
msgid "and convert it to the working color space"
msgstr ""
#. +> trunk5
#: utilities/setup/setupicc.cpp:292
#, kde-format
msgid "Assume it is using the working color space"
msgstr ""
#. i18n("<p></p>"));
#.
#. +> trunk5
#: utilities/setup/setupicc.cpp:297
#, kde-format
msgid "Convert it from default input color space to working space"
msgstr ""
#. +> trunk5
#: utilities/setup/setupicc.cpp:315
#, kde-format
msgid "When loading a RAW file with uncalibrated colors"
msgstr ""
#. +> trunk5
#: utilities/setup/setupicc.cpp:322
#, kde-format
msgid "Ask for the input profile"
msgstr ""
#. i18n("<p></p>"));
#.
#. +> trunk5
#: utilities/setup/setupicc.cpp:327
#, kde-format
msgid "Automatic color correction"
msgstr ""
#. i18n("<p></p>"));
#.
#. +> trunk5
#: utilities/setup/setupicc.cpp:332
#, kde-format
msgid "Convert it from the default input profile"
msgstr ""
#. +> trunk5
#: utilities/setup/setupicc.cpp:356
#, kde-format
msgid "Color Managed View"
msgstr ""
#. +> trunk5
#: utilities/setup/setupicc.cpp:361
#, kde-format
msgid "Monitor profile:"
msgstr ""
#. +> trunk5
#: utilities/setup/setupicc.cpp:365
#, kde-format
msgid "<p>Select the color profile for your monitor here.</p>"
msgstr ""
#. +> trunk5
#: utilities/setup/setupicc.cpp:369
#, kde-format
msgid "<p>You can use this button to get more detailed information about the selected monitor profile.</p>"
msgstr ""
#. +> trunk5
#: utilities/setup/setupicc.cpp:373
#, kde-format
msgid "Use color managed view in editor"
msgstr ""
#. +> trunk5
#: utilities/setup/setupicc.cpp:374
#, kde-format
msgid "<p>Turn on this option if you want to use your <b>Monitor Color Profile</b> to show your pictures in the Image Editor window with a color correction adapted to your monitor. You can at any time toggle this option from the Editor window. <i>Warning</i>: This can slow down rendering of the image, depending on the speed of your computer.</p>"
msgstr ""
#. +> trunk5
#: utilities/setup/setupicc.cpp:381
#, kde-format
msgid "Use color managed view for previews and thumbnails"
msgstr ""
#. +> trunk5
#: utilities/setup/setupicc.cpp:396
#, kde-format
msgid "Camera and Scanner"
msgstr ""
#. +> trunk5
#: utilities/setup/setupicc.cpp:401
#, kde-format
msgid "Default input color profile:"
msgstr ""
#. +> trunk5
#: utilities/setup/setupicc.cpp:403
#, kde-format
msgid "<p>This is the default color profile for your input device (that is your camera - or your scanner). A camera input profile is recommended for correct conversion of RAW images in 16bit. Some of the options about loading behavior above refer to this profile.</p>"
msgstr ""
#. +> trunk5
#: utilities/setup/setupicc.cpp:410
#, kde-format
msgid "<p>You can use this button to get more detailed information about the selected input profile.</p>"
msgstr ""
#. +> trunk5
#: utilities/setup/setupicc.cpp:421
#, kde-format
msgid "Printing and Proofing"
msgstr ""
#. +> trunk5
#: utilities/setup/setupicc.cpp:426
#, kde-format
msgid "Output device profile:"
msgstr ""
#. +> trunk5
#: utilities/setup/setupicc.cpp:435
#, kde-format
msgid "<p>You can use this button to get more detailed information about the selected proofing profile.</p>"
msgstr ""
#. +> trunk5
#: utilities/setup/setupicc.cpp:446
#, kde-format
msgid "Color Profiles Repository"
msgstr ""
#. +> trunk5
#: utilities/setup/setupicc.cpp:451
#, kde-format
msgid "digiKam looks for ICC profiles in a number of <a href='default'>default locations</a>. You can specify an additional folder:"
msgstr ""
#. +> trunk5
#: utilities/setup/setupicc.cpp:459
#, kde-format
msgid "<p>digiKam searches ICC profiles in default system folders and ships itself a few selected profiles. Store all your additional color profiles in the directory set here.</p>"
msgstr ""
#. +> trunk5
#: utilities/setup/setupicc.cpp:482
#, kde-format
msgid "Use black point compensation"
msgstr ""
#. +> trunk5
#: utilities/setup/setupicc.cpp:483
#, kde-format
msgid "<p><b>Black Point Compensation</b> is a way to make adjustments between the maximum black levels of digital files and the black capabilities of various digital devices.</p>"
msgstr ""
#. +> trunk5
#: utilities/setup/setupicc.cpp:489
#, kde-format
msgid "Rendering Intents:"
msgstr ""
#. +> trunk5
#: utilities/setup/setupicc.cpp:505
#, kde-format
msgid "Profiles"
msgstr ""
#. +> trunk5
#: utilities/setup/setupicc.cpp:699
#, kde-format
msgid "Monitor Profile From System Settings"
msgstr ""
#. +> trunk5
#: utilities/setup/setupicc.cpp:731
#, kde-format
msgid "No ICC profiles files found."
msgstr ""
#. +> trunk5
#: utilities/setup/setupicc.cpp:746
#, kde-format
msgid "No Display Profile Available"
msgstr ""
#. +> trunk5
#: utilities/setup/setupicc.cpp:748
#, kde-format
msgid "No Output Profile Available"
msgstr ""
#. +> trunk5
#: utilities/setup/setupicc.cpp:878
#, kde-format
msgctxt "none of the paths"
msgid "none"
msgstr ""
#. +> trunk5
#: utilities/setup/setupicc.cpp:887
#, kde-format
msgid ""
"On Windows, the default search paths include "
"<ul>"
"<li>%1/Windows/Spool/Drivers/Color/</li>"
"<li>%2/Windows/Color/</li>"
"</ul>"
"On your system, currently these paths exist and are scanned:"
"<ul>"
"<li>%3</li>"
"</ul>"
msgstr ""
#. +> trunk5
#: utilities/setup/setupicc.cpp:901
#, kde-format
msgid ""
"On Mac OS X, the default search paths include "
"<ul>"
"<li>/System/Library/ColorSync/Profiles</li>"
"<li>/Library/ColorSync/Profiles</li>"
"<li>~/Library/ColorSync/Profiles</li>"
"<li>/opt/local/share/color/icc</li>"
"<li>/opt/digikam/share/color/icc</li>"
"<li>~/.local/share/color/icc/</li>"
"<li>~/.local/share/icc/</li>"
"<li>~/.color/icc/</li>"
"</ul>"
"On your system, currently these paths exist and are scanned:"
"<ul>"
"<li>%1</li>"
"</ul>"
msgstr ""
#. +> trunk5
#: utilities/setup/setupicc.cpp:918
#, kde-format
msgid ""
"On Linux, the default search paths include "
"<ul>"
"<li>/usr/share/color/icc</li>"
"<li>/usr/local/share/color/icc</li>"
"<li>~/.local/share/color/icc/</li>"
"<li>~/.local/share/icc/</li>"
"<li>~/.color/icc/</li>"
"</ul>"
"On your system, currently these paths exist and are scanned:"
msgid "Set this option to automatically synchronize zooming and panning between left and right panels if the images have the same size."
msgstr ""
#. +> trunk5
#: utilities/setup/setuplighttable.cpp:103
#, kde-format
msgid "Selecting a thumbbar item loads the image to the right panel"
msgstr ""
#. +> trunk5
#: utilities/setup/setuplighttable.cpp:105
#, kde-format
msgid "Set this option to automatically load an image into the right panel when the corresponding item is selected on the thumbbar."
msgstr ""
#. +> trunk5
#: utilities/setup/setuplighttable.cpp:108
#, kde-format
msgid "Clear the light table on close"
msgstr ""
#. +> trunk5
#: utilities/setup/setuplighttable.cpp:109
#, kde-format
msgid "Set this option to remove all images from the light table when you close it, or unset it to preserve the images currently on the light table."
msgstr ""
#. +> trunk5
#: utilities/setup/setupmisc.cpp:134
#, kde-format
msgid "String comparison type:"
msgstr ""
#. +> trunk5
#: utilities/setup/setupmisc.cpp:136
#, kde-format
msgctxt "method to compare strings"
msgid "Natural"
msgstr ""
#. +> trunk5
#: utilities/setup/setupmisc.cpp:137
#, kde-format
msgctxt "method to compare strings"
msgid "Normal"
msgstr ""
#. +> trunk5
#: utilities/setup/setupmisc.cpp:138
#, kde-format
msgid ""
"<qt>Sets the way in which strings are compared inside digiKam. This eg. influences the sorting of the tree views.<br/>"
"<b>Natural</b> tries to compare strings in a way that regards some normal conventions and will eg. result in sorting numbers naturally even if they have a different number of digits.<br/>"
"<b>Normal</b> uses a more technical approach. Use this style if you eg. want to entitle albums with ISO dates (201006 or 20090523) and the albums should be sorted according to these dates.</qt>"
msgstr ""
#. +> trunk5
#: utilities/setup/setupmisc.cpp:148
#, kde-format
msgid "Confirm when moving items to the &trash"
msgstr ""
#. +> trunk5
#: utilities/setup/setupmisc.cpp:149
#, kde-format
msgid "Confirm when permanently deleting items"
msgstr ""
#. +> trunk5
#: utilities/setup/setupmisc.cpp:150
#, kde-format
msgid "Do not confirm when applying changes in the &right sidebar"
msgstr ""
#. +> trunk5
#: utilities/setup/setupmisc.cpp:151
#, kde-format
msgid "&Scan for new items at startup (makes startup slower)"
msgstr ""
#. +> trunk5
#: utilities/setup/setupmisc.cpp:152
#, kde-format
msgid ""
"Set this option to force digiKam to scan all collections for new items to\n"
"register new elements in database. The scan is performed in the background through\n"
"the progress manager available in the statusbar\n"
" when digiKam main interface\n"
"is loaded. If your computer is fast enough, this will have no effect on usability\n"
"of digiKam while scanning. If your collections are huge or if you use a remote database,\n"
"this can introduce low latency, and it's recommended to disable this option and to plan\n"
"a manual scan through the maintenance tool at the right moment."
"Set this option to force digiKam to clean up the core database from obsolete item entries.\n"
"Entries are only deleted if the connected image/video/audio file was already removed, i.e.\n"
"the database object wastes space.\n"
"This option does not clean up other databases as the thumbnails or recognition db.\n"
"For clean up routines for other databases, please use the maintenance."
msgstr ""
#. +> trunk5
#: utilities/setup/setupmisc.cpp:176
#, kde-format
msgid "Draw frames around grouped items"
msgstr ""
#. +> trunk5
#: utilities/setup/setupmisc.cpp:178
#, kde-format
msgid "Show only face tags for assigning names in people sidebar"
msgstr ""
#. +> trunk5
#: utilities/setup/setupmisc.cpp:181
#, kde-format
msgid "Lower bound for minimum similarity:"
msgstr ""
#. +> trunk5
#: utilities/setup/setupmisc.cpp:187
#, kde-format
msgid "Select here the lower bound of the minimum similarity threshold for fuzzy and duplicates searches. The default value is 40. Selecting a lower value than 40 can make the search <b>really</b> slow."
msgstr ""
#. +> trunk5
#: utilities/setup/setupmisc.cpp:199
#, kde-format
msgid "Set this option to configure how sidebar tab titles are visible. Use \"Only For Active Tab\" option if you use a small screen resolution as with a laptop computer."
msgstr ""
#. +> trunk5
#: utilities/setup/setupmisc.cpp:274
#, kde-format
msgctxt "@title:tab"
msgid "Behaviour"
msgstr ""
#. +> trunk5
#: utilities/setup/setupmisc.cpp:283
#, kde-format
msgid "Perform the following operations on all group members:"
msgstr ""
#. +> trunk5
#: utilities/setup/setupmisc.cpp:284
#, kde-format
msgid ""
"When images are grouped the following operations<br/>"
"are performed only on the displayed item (No)<br/>"
"or on all the hidden items in the group as well (Yes).<br/>"
"If Ask is selected, there will be a prompt every<br/>"
"time this operation is executed."
msgstr ""
#. +> trunk5
#: utilities/setup/setupmisc.cpp:292
#, kde-format
msgid "Ask"
msgstr ""
#. +> trunk5
#: utilities/setup/setupmisc.cpp:339
#, kde-format
msgctxt "@title:tab"
msgid "Grouping"
msgstr ""
#. +> trunk5
#: utilities/setup/setupslideshow.cpp:106
#, kde-format
msgid "Delay between images:"
msgstr ""
#. +> trunk5
#: utilities/setup/setupslideshow.cpp:114
#, kde-format
msgid "The delay, in seconds, between images."
msgstr ""
#. +> trunk5
#: utilities/setup/setupslideshow.cpp:117
#, kde-format
msgid "Start with current image"
msgstr ""
#. +> trunk5
#: utilities/setup/setupslideshow.cpp:118
#, kde-format
msgid "If this option is enabled, the Slideshow will be started with the current image selected in the images list."
msgstr ""
#. +> trunk5
#: utilities/setup/setupslideshow.cpp:121
#, kde-format
msgid "Slideshow runs in a loop"
msgstr ""
#. +> trunk5
#: utilities/setup/setupslideshow.cpp:122
#, kde-format
msgid "Run the slideshow in a loop."
msgstr ""
#. +> trunk5
#: utilities/setup/setupslideshow.cpp:124
#, kde-format
msgid "Show progress indicator"
msgstr ""
#. +> trunk5
#: utilities/setup/setupslideshow.cpp:125
#, kde-format
msgid "Show a progress indicator with pending items to show and time progression."
msgstr ""
#. +> trunk5
#: utilities/setup/setupslideshow.cpp:127
#, kde-format
msgid "Show image file name"
msgstr ""
#. +> trunk5
#: utilities/setup/setupslideshow.cpp:128
#, kde-format
msgid "Show the image file name at the bottom of the screen."
msgstr ""
#. +> trunk5
#: utilities/setup/setupslideshow.cpp:130
#, kde-format
msgid "Show image creation date"
msgstr ""
#. +> trunk5
#: utilities/setup/setupslideshow.cpp:131
#, kde-format
msgid "Show the image creation time/date at the bottom of the screen."
msgstr ""
#. +> trunk5
#: utilities/setup/setupslideshow.cpp:134
#, kde-format
msgid "Show the camera aperture and focal length at the bottom of the screen."
msgstr ""
#. +> trunk5
#: utilities/setup/setupslideshow.cpp:137
#, kde-format
msgid "Show the camera exposure and sensitivity at the bottom of the screen."
msgstr ""
#. +> trunk5
#: utilities/setup/setupslideshow.cpp:140
#, kde-format
msgid "Show the camera make and model at the bottom of the screen."
msgstr ""
#. +> trunk5
#: utilities/setup/setupslideshow.cpp:142
#, kde-format
msgid "Show image caption"
msgstr ""
#. +> trunk5
#: utilities/setup/setupslideshow.cpp:143
#, kde-format
msgid "Show the image caption at the bottom of the screen."
msgstr ""
#. +> trunk5
#: utilities/setup/setupslideshow.cpp:145
#, kde-format
msgid "Show image title"
msgstr ""
#. +> trunk5
#: utilities/setup/setupslideshow.cpp:146
#, kde-format
msgid "Show the image title at the bottom of the screen."
msgstr ""
#. +> trunk5
#: utilities/setup/setupslideshow.cpp:148
#, kde-format
msgid "Show image caption if it hasn't title"
msgstr ""
#. +> trunk5
#: utilities/setup/setupslideshow.cpp:149
#, kde-format
msgid "Show the image caption at the bottom of the screen if no titles existed."
msgstr ""
#. +> trunk5
#: utilities/setup/setupslideshow.cpp:151
#, kde-format
msgid "Show image tags"
msgstr ""
#. +> trunk5
#: utilities/setup/setupslideshow.cpp:152
#, kde-format
msgid "Show the digiKam image tag names at the bottom of the screen."
msgstr ""
#. +> trunk5
#: utilities/setup/setupslideshow.cpp:154
#, kde-format
msgid "Show image labels"
msgstr ""
#. +> trunk5
#: utilities/setup/setupslideshow.cpp:155
#, kde-format
msgid "Show the digiKam image color label, pick label, and rating at the bottom of the screen."
msgstr ""
#. +> trunk5
#: utilities/setup/setupslideshow.cpp:158
#, kde-format
msgid "Screen placement:"
msgstr ""
#. +> trunk5
#: utilities/setup/setupslideshow.cpp:160
#, kde-format
msgid "In case of multi-screen computer, select here the monitor to slide contents."
msgstr ""
#. +> trunk5
#: utilities/setup/setupslideshow.cpp:163
#, kde-format
msgctxt "@label:listbox The current screen, for the presentation mode"
msgid "Current Screen"
msgstr ""
#. +> trunk5
#: utilities/setup/setupslideshow.cpp:164
#, kde-format
msgctxt "@label:listbox The default screen for the presentation mode"
msgid "Default Screen"
msgstr ""
#. +> trunk5
#: utilities/setup/setupslideshow.cpp:168
#, kde-format
msgctxt "@label:listbox %1 is the screen number (0, 1, ...)"
msgid "Screen %1"
msgstr ""
#. +> trunk5
#: utilities/setup/setuptemplate.cpp:92
#, kde-format
msgid "Template Title:"
msgstr ""
#. +> trunk5
#: utilities/setup/setuptemplate.cpp:95
#, kde-format
msgid "Enter the metadata template title here."
msgstr ""
#. +> trunk5
#: utilities/setup/setuptemplate.cpp:96
#, kde-format
msgid "<p>Enter the metadata template title here. This title will be used to identify a template in your collection.</p>"
msgstr ""
#. +> trunk5
#: utilities/setup/setuptemplate.cpp:106
#, kde-format
msgid "<b>Note: These information are used to set <b><a href='http://en.wikipedia.org/wiki/Extensible_Metadata_Platform'>XMP</a></b> and <b><a href='http://en.wikipedia.org/wiki/IPTC'>IPTC</a></b> tag contents. There is no limitation with XMP, but note that IPTC text tags only support the printable <b><a href='http://en.wikipedia.org/wiki/Ascii'>ASCII</a></b> character set, and tag sizes are limited. Use contextual help for details.</b>"
msgid "Adds pixels using the color of surrounding pixels. Produces smoother tonal gradations than Bilinear."
msgstr ""
#. +> trunk5 stable5
#: libs/image/kis_filter_strategy.h:96
#, kde-format
msgid "Box"
msgstr ""
#. +> trunk5 stable5
#: libs/image/kis_filter_strategy.h:102
#, kde-format
msgid "Replicate pixels in the image. Preserves all the original detail, but can produce jagged effects."
msgstr ""
#. +> trunk5 stable5
#: libs/image/kis_filter_strategy.h:115
#: libs/ui/canvas/kis_canvas_controller.cpp:312
#, kde-format
msgid "Bilinear"
msgstr ""
#. +> trunk5 stable5
#: libs/image/kis_filter_strategy.h:121
#, kde-format
msgid "Adds pixels averaging the color values of surrounding pixels. Produces medium quality results when the image is scaled from half to two times the original size."
msgstr ""
#. +> trunk5 stable5
#: libs/image/kis_filter_strategy.h:131
#, kde-format
msgid "Bell"
msgstr ""
#. +> trunk5 stable5
#: libs/image/kis_filter_strategy.h:142
#, kde-format
msgid "BSpline"
msgstr ""
#. +> trunk5 stable5
#: libs/image/kis_filter_strategy.h:153
#, kde-format
msgid "Lanczos3"
msgstr ""
#. +> trunk5 stable5
#: libs/image/kis_filter_strategy.h:159
#, kde-format
msgid "Offers similar results than Bicubic, but maybe a little bit sharper. Can produce light and dark halos along strong edges."
msgid "This merge strategy attempts to find the best solution for merging, for instance by merging the list of authors together, or keeping identical photographic information."
msgid "This image is larger than <b>%1 x %2</b>. Images this size cannot be saved to this format."
msgstr ""
#. +> trunk5
#: libs/impex/ColorModelCheck.h:44
#, kde-format
msgctxt "image conversion warning"
msgid "The color model <b>%1</b> or channel depth <b>%2</b> cannot be saved to this format. Your image will be converted."
msgstr ""
#. +> trunk5
#: libs/impex/ColorModelHomogenousCheck.h:125
#, kde-format
msgctxt "image conversion warning"
msgid "Your image contains layers with a color model that is different from the image. The layers will be converted."
msgstr ""
#. +> trunk5
#: libs/impex/ColorModelPerLayerCheck.h:129
#, kde-format
msgctxt "image conversion warning"
msgid "Your image contains layers with the color model <b>%1</b> and channel depth <b>%2</b> which cannot be saved to this format. The layers will be converted."
msgstr ""
#. +> trunk5
#: libs/impex/CompositionsCheck.h:36
#, kde-format
msgctxt "image conversion warning"
msgid "The image contains <b>compositions</b>. The compositions will not be saved."
msgstr ""
#. +> trunk5
#: libs/impex/ExifCheck.h:40
#, kde-format
msgctxt "image conversion warning"
msgid "The image contains <b>Exif</b> metadata. The metadata will not be saved."
"<p><i>Thanks! You were all <b>awesome</b>!</i></p>"
"</body></html>"
msgstr ""
#. +> trunk5 stable5
#: libs/ui/dialogs/kis_about_application.cpp:98
#, kde-format
msgid "Backers"
msgstr ""
#. +> trunk5 stable5
#: libs/ui/dialogs/kis_about_application.cpp:104
#, kde-format
msgid ""
"<html><head/><body>"
"<h1 align=\"center\">Thanks To</h1>"
"<p>"
msgstr ""
#. +> trunk5 stable5
#: libs/ui/dialogs/kis_about_application.cpp:123
#, kde-format
msgid ""
".</p>"
"<p><i>For supporting Krita development with advice, icons, brush sets and more.</i></p>"
"</body></html>"
msgstr ""
#. +> trunk5 stable5
#: libs/ui/dialogs/kis_about_application.cpp:126
#, kde-format
msgid "Also Thanks To"
msgstr ""
#. +> trunk5 stable5
#: libs/ui/dialogs/kis_about_application.cpp:130
#, kde-format
msgid ""
"<html><head/><body>"
"<h1 align=\"center\"><b>Your Rights</h1>"
"<p>Krita is released under the GNU General Public License (version 2 or any later version).</p>"
"<p>This license grants people a number of freedoms:</p>"
"<ul>"
"<li>You are free to use Krita, for any purpose</li>"
"<li>You are free to distribute Krita</li>"
"<li>You can study how Krita works and change it</li>"
"<li>You can distribute changed versions of Krita</li>"
"</ul>"
"<p>The Krita Foundation and its projects on krita.org are <b>committed</b> to preserving Krita as free software.</p>"
"<h1 align=\"center\">Your artwork</h1>"
"<p>What you create with Krita is your sole property. All your artwork is free for you to use as you like.</p>"
"<p>That means that Krita can be used commercially, for any purpose. There are no restrictions whatsoever.</p>"
"<p>Krita’s GNU GPL license guarantees you this freedom. Nobody is ever permitted to take it away, in contrast to trial or educational versions of commercial software that will forbid your work in commercial situations.</p>"
msgid "The image data you want to paste does not have an ICM profile associated with it. If you do not select a profile, Krita will assume that the image data is encoded in the import profile defined in the Settings dialog."
msgid "Hue hopefully maintained (but not required), lightness and saturation sacrificed to maintain the perceived color. White point changed to result in neutral grays. Intended for images."
msgid "Hue and saturation maintained with lightness sacrificed to maintain saturation. White point changed to result in neutral grays. Intended for business graphics (make it colorful charts, graphs, overheads, ...)"
msgid "Within the destination device gamut; hue, lightness and saturation are maintained. Outside the gamut; hue and lightness are maintained, saturation is sacrificed. White point for source and destination; unchanged. Intended for spot colors (Pantone, TruMatch, logo colors, ...)"
"<p><a href=\"https://en.wikipedia.org/wiki/Color_space\"><span style=\" font-weight:600; text-decoration: underline; color:#006e28;\">Color Spaces</span></a> determine how colors are encoded in your files. Different color spaces have different properties and are used for different purposes.</p>"
"<p>Try to disable vsync for Krita. This makes painting more responsive. Uncheck only when experiencing crashes with some GPU/driver combinations.</p>"
"<p><span style=\" font-weight:600;\">Note:</span> This changes only the colorspace of the rendered image. To convert the colorspace of the layers, use Convert Image Colorspace.</p>"
"<p>Set how much you wish to correct the adaptation state. This will affect how <span style=\" font-style:italic;\">Absolute Colorimetric</span> changes the whites of your image. In Layman's terms: how much do you wish to have the color management correct the paper-color to screen white while using <span style=\" font-style:italic;\">Absolute Colorimetric</span>?</p>"
"<p>Black Point compensation matches the darkest color of the source device to the darkest color of the destination device. Relative Colorimetric without Black Point Compensation will show the difference between the darkest values. With blackpoint compensation, black is black.</p>"
"<p>When rendering animation frames (into files or during animation cache regeneration), Krita will make the specified number of copies of your image and will work on them in parallel. Each copy will demand more RAM for its storage (about 20% of the size of you image), so raise this limit only if you have enough RAM installed.</p>"
"<p><br/>"
"</p>"
"<p><span style=\" font-weight:600;\">Recommended value:</span> set Clones Limit to the number of <span style=\" text-decoration: underline;\">physical</span> (non-hyperthreaded) cores your CPU has</p>"
"<p>Krita will try to limit the number of screen updates per second to the given number. A lower number will decrease visual responsiveness but increase stylus precision on some systems like macOS."
"<p>When performance logging is enabled Krita saves timing information into the '<working_dir>/log' folder. If you experience performance problems and want to help us, enable this option and add the contents of the directory to a bug report.</p>"
"<p>Choose the optional emblem icon that indicates extra information, such as the preset being a special effects brush, or just using tilt, or angled in some way.</p>"
msgid "The <i>Alternate Invocation</i> action performs an alternate action with the current tool. For example, using the brush tool it picks a color from the canvas."
"<p>The driver for your drawing tablet and Windows do not agree on the size of the screen your tablet is connected to. Please select the right option.</p>"
msgid "A spot color is a color that the printer is able to print without mixing the paints it has available to it. The opposite is called a process color."
"You enabled OpenColorIO based color management, but your image is not an RGB image.\n"
"OpenColorIO-based color management only works with RGB images.\n"
"Please check the settings in the LUT docker.\n"
"OpenColorIO will now be deactivated."
msgstr ""
#. +> trunk5 stable5
#: libs/ui/opengl/kis_opengl_win.cpp:116
#, kde-format
msgid "The Intel graphics driver in use is known to have issues with OpenGL."
msgstr ""
#. +> trunk5 stable5
#: libs/ui/opengl/kis_opengl_win.cpp:118
#, kde-format
msgid "Intel graphics drivers tend to have issues with OpenGL so ANGLE will be used by default. You may manually switch to OpenGL but it is not guaranteed to work properly."
msgstr ""
#. +> trunk5 stable5
#: libs/ui/opengl/kis_opengl_win.cpp:248
#, kde-format
msgid "The graphics driver in use does not meet the OpenGL requirements."
msgstr ""
#. +> trunk5 stable5
#: libs/ui/opengl/kis_opengl_win.cpp:250
#, kde-format
msgid "The graphics driver in use may not work well with OpenGL."
msgstr ""
#. +> trunk5 stable5
#: libs/ui/opengl/kis_opengl_win.cpp:262
#, kde-format
msgid "ANGLE is using a software Direct3D renderer, which is not hardware-accelerated and may be very slow. This can happen if the graphics drivers are not properly installed, or when using a Remote Desktop session."
#. i18nc("Who made the profile?","Manufacturer: ") + currentColorSpace()->profile()->manufacturer() + "</p>"); //This would work if people actually wrote the manufacturer into the manufacturer fiedl...
"<b><a href=\"https://en.wikipedia.org/wiki/RGB_color_space\">RGB (Red, Green, Blue)</a></b>, is the color model used by screens and other light-based media.<br/>"
"RGB is an additive color model: adding colors together makes them brighter. This color model is the most extensive of all color models, and is recommended as a model for painting,that you can later convert to other spaces. RGB is also the recommended colorspace for HDR editing."
"<b><a href=\"https://en.wikipedia.org/wiki/CMYK_color_model\">CMYK (Cyan, Magenta, Yellow, Key)</a></b>, is the model used by printers and other ink-based media.<br/>"
"CMYK is a subtractive model, meaning that adding colors together will turn them darker. Because of CMYK profiles being very specific per printer, it is recommended to work in RGB space, and then later convert to a CMYK profile, preferably one delivered by your printer. <br/>"
"CMYK is <b>not</b> recommended for painting.Unfortunately, Krita cannot retrieve colorants or the TRC for this space."
msgid "<b><a href=\"https://en.wikipedia.org/wiki/CIE_1931_color_space\">CIE XYZ</a></b>is the space determined by the CIE as the space that encompasses all other colors, and used to convert colors between profiles. XYZ is an additive color model, meaning that adding colors together makes them brighter. XYZ is <b>not</b> recommended for painting, but can be useful to encode in. The Tone Response Curve is assumed to be linear."
"<b><a href=\"https://en.wikipedia.org/wiki/Grayscale\">Grayscale</a></b> only allows for gray values and transparent values. Grayscale images use half the memory and disk space compared to an RGB image of the same bit-depth.<br/>"
"Grayscale is useful for inking and greyscale images. In Krita, you can mix Grayscale and RGB layers in the same image."
"<b><a href=\"https://en.wikipedia.org/wiki/Lab_color_space\">L*a*b</a></b>. <b>L<b> stands for Lightness, the <b>a</b> and <b>b</b> components represent color channels.<br/>"
"L*a*b is a special model for color correction. It is based on human perception, meaning that it tries to encode the difference in lightness, red-green balance and yellow-blue balance. This makes it useful for color correction, but the vast majority of color maths in the blending modes do <b>not</b> work as expected here.<br/>"
"Similarly, Krita does not support HDR in LAB, meaning that HDR images converted to LAB lose color information. This colorspace is <b>not</b> recommended for painting, nor for export, but best as a space to do post-processing in. The TRC is assumed to be the L* TRC."
msgid "<b><a href=\"https://en.wikipedia.org/wiki/YCbCr\">YCbCr (Luma, Blue Chroma, Red Chroma)</a></b>, is a model designed for video encoding. It is based on human perception, meaning that it tries to encode the difference in lightness, red-green balance and yellow-blue balance. Chroma in this case is then a word indicating a special type of saturation, in these cases the saturation of Red and Blue, of which the desaturated equivalents are Green and Yellow respectively. It is available to open up certain images correctly, but Krita does not currently ship a profile for this due to lack of open source ICC profiles for YCrCb."
msgid "<b>8 bit integer</b>: The default amount of colors per channel. Each channel will have 256 values available, leading to a total amount of 256*amount of channels. Recommended to use for images intended for the web, or otherwise simple images."
msgid "<b>16 bit integer</b>: Also known as 'deep color'. 16 bit is ideal for editing images with a linear TRC, large color space, or just when you need more precise color blending. This does take twice as much space on the RAM and hard-drive than any given 8 bit image of the same properties, and for some devices it takes much more processing power. We recommend watching the RAM usage of the file carefully, or otherwise use 8 bit if your computer slows down. Take care to disable conversion optimization when converting from 16 bit/channel to 8 bit/channel."
msgctxt "When the selected Bitdepth is 16 bit float"
msgid "<b>16 bit floating point</b>: Also known as 'Half Floating Point', and the standard in VFX industry images. 16 bit float is ideal for editing images with a linear Tone Response Curve, large color space, or just when you need more precise color blending. It being floating point is an absolute requirement for Scene Referred (HDR) images. This does take twice as much space on the RAM and hard-drive than any given 8 bit image of the same properties, and for some devices it takes much more processing power. We recommend watching the RAM usage of the file carefully, or otherwise use 8 bit if your computer slows down."
msgctxt "When the selected Bitdepth is 32bit float"
msgid "<b>32 bit float point</b>: Also known as 'Full Floating Point'. 32 bit float is ideal for editing images with a linear TRC, large color space, or just when you need more precise color blending. It being floating point is an absolute requirement for Scene Referred (HDR) images. This does take four times as much space on the RAM and hard-drive than any given 8 bit image of the same properties, and for some devices it takes much more processing power. We recommend watching the RAM usage of the file carefully, or otherwise use 8 bit if your computer slows down."
msgctxt "When the selected Bitdepth is 64bit float, but this isn't actually available in Krita at the moment."
msgid "<b>64 bit float point</b>: 64 bit float is as precise as it gets in current technology, and this depth is used most of the time for images that are generated or used as an input for software. It being floating point is an absolute requirement for Scene Referred (HDR) images. This does take eight times as much space on the RAM and hard-drive than any given 8 bit image of the same properties, and for some devices it takes much more processing power. We recommend watching the RAM usage of the file carefully, or otherwise use 8 bit if your computer slows down."
msgctxt "These are Elle Stone's notes on her profiles that we ship."
msgid ""
"<p><b>Extra notes on profiles by Elle Stone:</b></p>"
"<p><i>Krita comes with a number of high quality profiles created by <a href=\"http://ninedegreesbelow.com\">Elle Stone</a>. This is a summary. Please check <a href=\"http://ninedegreesbelow.com/photography/lcms-make-icc-profiles.html\">the full documentation</a> as well.</i></p>"
msgid "<p>Quoting Wikipedia, 'Academy Color Encoding System (ACES) is a color image encoding system proposed by the Academy of Motion Picture Arts and Sciences that will allow for a fully encompassing color accurate workflow, with 'seamless interchange of high quality motion picture images regardless of source'.</p>"
msgid "<p>The ACEScg color space is smaller than the ACES color space, but large enough to contain the 'Rec-2020 gamut and the DCI-P3 gamut', unlike the ACES color space it has no negative values and contains only few colors that fall just barely outside the area of real colors humans can see</p>"
"<p>To avoid possible copyright infringement issues, I used 'ClayRGB' (following ArgyllCMS) as the base name for these profiles. As used below, 'Compatible with Adobe RGB 1998' is terminology suggested in the preamble to the AdobeRGB 1998 color space specifications.</p>"
"<p>The Adobe RGB 1998 color gamut covers a higher percentage of real-world cyans, greens, and yellow-greens than sRGB, but still doesn't include all printable cyans, greens, yellow-greens, especially when printing using today's high-end, wider gamut, ink jet printers. BetaRGB (not included in the profile pack) and Rec.2020 are better matches for the color gamuts of today's wide gamut printers.</p>"
"<p>The Adobe RGB 1998 color gamut is a reasonable approximation to some of today's high-end wide gamut monitors.</p>"
"<p>This profile's color gamut is roughly the same size and shape as the ACES color space gamut, and like the ACES color space, AllColorsRGB holds all possible real colors. But AllColorsRGB actually has a slightly larger color gamut (to capture some fringe colors that barely qualify as real when viewed by the standard observer) and uses the D50 white point.</p>"
"<p>Just like the ACES color space, AllColorsRGB holds a high percentage of imaginary colors. See the Completely <a href=\"http://ninedegreesbelow.com/photography/xyz-rgb.html\">Painless Programmer's Guide to XYZ, RGB, ICC, xyY, and TRCs</a> for more information about imaginary colors.</p>"
"<p>There is no particular reason why anyone would want to use this profile for editing, unless one needs to make sure your color space really does hold all possible real colors.</p>"
"<p>This profile is included mostly for its historical significance. It's the color space that was used in the original color matching experiments that led to the creation of the XYZ reference color space.</p>"
"<p>The ASTM E white point is probably the right E white point to use when making the CIERGB color space profile. It's not clear to me what the correct CIERGB primaries really are. Lindbloom gives one set. The LCMS version 1 tutorial gives a different set. Experts in the field contend that the real primaries should be calculated from the spectral wavelengths, so I did.</p>"
msgid "<p>The IdentityRGB working space is included in the profile pack because it's a mathematically obvious way to include all possible visible colors, though it has a higher percentage of imaginary colors than the ACES and AllColorsRGB color spaces. I cannot think of any reason why you'd ever want to actually edit images in the IdentityRGB working space.</p>"
"<p>To avoid possible copyright infringement issues, I used 'LargeRGB' (following RawTherapee) as the base name for these profiles."
"<p>Kodak designed the RIMM/ROMM (ProPhotoRGB) color gamut to include all printable and most real world colors. It includes some imaginary colors and excludes some of the real world blues and violet blues that can be captured by digital cameras. It also excludes some very saturated 'camera-captured' yellows as interpreted by some (and probably many) camera matrix input profiles."
"<p>The ProPhotoRGB primaries are hard-coded into Adobe products such as Lightroom and the Dng-DCP camera 'profiles'. However, other than being large enough to hold a lot of colors, ProPhotoRGB has no particular merit as an RGB working space. Personally and for most editing purposes, I recommend BetaRGB, Rec2020, or the ACEScg profiles ProPhotoRGB.</p>"
msgid "<p>Rec.2020 is the up-and-coming replacement for the thoroughly outdated sRGB color space. As of June 2015, very few (if any) display devices (and certainly no affordable display devices) can display all of Rec.2020. However, display technology is closing in on Rec.2020, movies are already being made for Rec.2020, and various cameras offer support for Rec.2020. And in the digital darkroom Rec.2020 is much more suitable as a general RGB working space than the exceedingly small sRGB color space.</p>"
"<p>Hewlett-Packard and Microsoft designed sRGB to match the color gamut of consumer-grade CRTs from the 1990s. sRGB is the standard color space for the world wide web and is still the best choice for exporting images to the internet.</p>"
"<p>The sRGB color gamut was a good match to calibrated decent quality CRTs. But sRGB is not a good match to many consumer-grade LCD monitors, which often cannot display the more saturated sRGB blues and magentas (the good news: as technology progresses, wider gamuts are trickling down to consumer grade monitors).</p>"
"<p>Printer color gamuts can easily exceed the sRGB color gamut in cyans, greens, and yellow-greens. Colors from interpolated camera raw files also often exceed the sRGB color gamut.</p>"
"<p>As a very relevant aside, using perceptual intent when converting to sRGB does not magically makes otherwise out of gamut colors fit inside the sRGB color gamut! The standard sRGB color space (along with all the other the RGB profiles provided in my profile pack) is a matrix profile, and matrix profiles don't have perceptual intent tables.</p>"
"<p>To avoid possible copyright infringement issues, I used 'WideRGB' as the base name for these profiles.</p>"
"<p>WideGamutRGB was designed by Adobe to be a wide gamut color space that uses spectral colors as its primaries. Pascale's primary values produce a profile that matches old V2 Widegamut profiles from Adobe and Canon. It is an interesting color space, but shortly after its introduction, Adobe switched their emphasis to the ProPhotoRGB color space.</p>"
msgid "<p>These profiles are for use with RGB images that have been converted to monotone gray (black and white). The main reason to convert from RGB to Gray is to save the file space needed to encode the image. Google places a premium on fast-loading web pages, and images are one of the slower-loading elements of a web page. So converting black and white images to Grayscale images does save some kilobytes. For grayscale images uploaded to the internet, convert the image to the V2 Gray profile with the sRGB TRC.</p>"
msgid "<p>The profiles that end in '-g10.icc' are linear gamma (gamma=1.0, 'linear light', etc) profiles and should only be used when editing at high bit depths (16-bit floating point, 16-bit integer, 32-bit floating point, 32-bit integer). Many editing operations produce better results in linear gamma color spaces.</p>"
msgid "<p>The profiles that end in '-labl.icc' have perceptually uniform TRCs. A few editing operations really should be done on perceptually uniform RGB. Make sure you use the V4 versions for editing high bit depth images.</p>"
msgid "<p>The profiles that end in '-srgbtrc.icc', '-g22.icc', and '-bt709.icc' have approximately but not exactly perceptually uniform TRCs. ProPhotoRGB's gamma=1.8 TRC is not quite as close to being perceptually uniform.</p>"
msgid "<p>When editing 8-bit images, you should use a profile with a small color gamut and an approximately or exactly perceptually uniform TRC. Of the profiles supplied in my profile pack, only the sRGB and AdobeRGB1998 (ClayRGB) color spaces are small enough for 8-bit editing. Even with the AdobeRGB1998 color space you need to be careful to not cause posterization. And of course you cannot use the linear gamma versions of these profiles for 8-bit editing.</p>"
msgid "<p>Use V4 profiles for editing images using high bit depth image editors that use LCMS as the Color Management Module. This includes Krita, digiKam/showFoto, and GIMP 2.9.</p>"
"Linear gamma RGB color spaces are not supposed to be used in 8-bit integer modes. It is suggested to use 16-bit integer or any floating point colorspace for linear profiles.\n"
"\n"
"Press \"Continue\" to create a 8-bit integer linear RGB color space or \"Cancel\" to return to the settings dialog."
msgstr ""
#. +> trunk5
#: libs/ui/widgets/kis_custom_image_widget.cc:494
#, kde-format
msgid "bytes"
msgstr ""
#. +> trunk5
#: libs/ui/widgets/kis_custom_image_widget.cc:497
#, kde-format
msgctxt "Abbreviation for kilobyte"
msgid "KB"
msgstr ""
#. +> trunk5
#: libs/ui/widgets/kis_custom_image_widget.cc:501
#, kde-format
msgctxt "Abbreviation for megabyte"
msgid "MB"
msgstr ""
#. +> trunk5
#: libs/ui/widgets/kis_custom_image_widget.cc:505
#, kde-format
msgctxt "Abbreviation for gigabyte"
msgid "GB"
msgstr ""
#. +> trunk5
#: libs/ui/widgets/kis_custom_image_widget.cc:508
#, kde-format
msgctxt "arg1: width. arg2: height. arg3: colorspace name. arg4: size of a channel in bits. arg5: size in unites of arg6. Arg6: KB, MB or GB"
msgid "This document will be %1 pixels by %2 pixels in %3, which means the pixel size is %4 bit. A single paint layer will thus take up %5 %6 of RAM."
"<html><b>KDE</b> is a world-wide network of software engineers, artists, writers, translators and facilitators who are committed to <a href=\"%1\">Free Software</a> development. This community has created hundreds of Free Software applications as part of the KDE frameworks, workspaces and applications.<br />"
"<br />"
"KDE is a cooperative enterprise in which no single entity controls the efforts or products of KDE to the exclusion of others. Everyone is welcome to join and contribute to KDE, including you.<br />"
"<br />"
"Visit <a href=\"%2\">%2</a> for more information about the KDE community and the software we produce.</html>"
"<html>Software can always be improved, and the KDE team is ready to do so. However, you - the user - must tell us when something does not work as expected or could be done better.<br />"
"<br />"
"KDE has a bug tracking system. Visit <a href=\"%1\">%1</a> or use the \"Report Bug...\" dialog from the \"Help\" menu to report bugs.<br />"
"<br />"
"If you have a suggestion for improvement then you are welcome to use the bug tracking system to register your wish. Make sure you use the severity called \"Wishlist\".</html>"
"<html>You do not have to be a software developer to be a member of the KDE team. You can join the national teams that translate program interfaces. You can provide graphics, themes, sounds, and improved documentation. You decide!<br />"
"<br />"
"Visit <a href=\"%1\">%1</a> for information on some projects in which you can participate.<br />"
"<br />"
"If you need more information or documentation, then a visit to <a href=\"%2\">%2</a> will provide you with what you need.</html>"
"<html>KDE software is and will always be available free of charge, however creating it is not free.<br />"
"<br />"
"To support development the KDE community has formed the KDE e.V., a non-profit organization legally founded in Germany. KDE e.V. represents the KDE community in legal and financial matters. See <a href=\"%1\">%1</a> for information on KDE e.V.<br />"
"<br />"
"KDE benefits from many kinds of contributions, including financial. We use the funds to reimburse members and others for expenses they incur when contributing. Further funds are used for legal support and organizing conferences and meetings. <br />"
" <br />"
"We would like to encourage you to support our efforts with a financial donation, using one of the ways described at <a href=\"%2\">%2</a>.<br />"
"<br />"
"Thank you very much in advance for your support.</html>"
msgid "The application for which you wish to submit a bug report - if incorrect, please use the Report Bug menu item of the correct application"
msgstr ""
#. +> trunk5 stable5
#: libs/widgetutils/xmlgui/kbugreport.cpp:120
#, kde-format
msgid "Application: "
msgstr ""
#. +> trunk5 stable5
#: libs/widgetutils/xmlgui/kbugreport.cpp:145
#, kde-format
msgid "The version of this application - please make sure that no newer version is available before sending a bug report"
msgstr ""
#. +> trunk5 stable5
#: libs/widgetutils/xmlgui/kbugreport.cpp:146
#, kde-format
msgid "Version:"
msgstr ""
#. +> trunk5 stable5
#: libs/widgetutils/xmlgui/kbugreport.cpp:151
#, kde-format
msgid "no version set (programmer error)"
msgstr ""
#. +> trunk5 stable5
#: libs/widgetutils/xmlgui/kbugreport.cpp:159
#, kde-format
msgid "OS:"
msgstr ""
#. +> trunk5 stable5
#: libs/widgetutils/xmlgui/kbugreport.cpp:167
#, kde-format
msgid "Compiler:"
msgstr ""
#. +> trunk5 stable5
#: libs/widgetutils/xmlgui/kbugreport.cpp:176
#, kde-format
msgid "<qt>To submit a bug report, click on the button below. This will open a web browser window on <a href=\"http://bugs.kde.org\">http://bugs.kde.org</a> where you will find a form to fill in. The information displayed above will be transferred to that server.</qt>"
msgid "Here you can see a list of key bindings, i.e. associations between actions (e.g. 'Copy') shown in the left column and keys or combination of keys (e.g. Ctrl+V) shown in the right column."
msgid "Values goes from black to white, or black to the most saturated colour. Saturation, in turn, goes from the most saturated colour to white, grey or black."
"<p>This sets the gamma value that the linearised HSY Luminosity is crunched with. 1 makes the selector fully linear, 2.2 is a practical default value.</p>"
msgid "The location of FFmpeg is unknown. Please install FFmpeg first: Krita cannot render animations without FFmpeg. (<a href=\"https://www.ffmpeg.org\">www.ffmpeg.org</a>)"
msgid "Krita tries to automatically check or uncheck this based on the information it can get from the profile you are converting from and the profile you are converting to."
msgid "The icon associated with this action. It is shown alongside text in the menu bar and in toolbars as required. A string to use KDE's image loading system, or a custom QPixmap or QIcon, or None."
msgid "<p>Failed to check version of dependency <application>%1</application>: Module do not have PEP396 <code>__version__</code> attribute. It is not disabled, but behaviour is unpredictable...</p>"
"<p>Select the location of the G'Mic-Qt plugin. You can download the plugin from the <a href=\"http://gmic.eu/\"><span style=\" text-decoration: underline; color:#2980b9;\">G'Mic website</span></a>. Make sure you download the special version for Krita, not the standalone or the GIMP version.</p>"
msgid "The formula decides how the kernel is created, so different formulas choose different values in the kernel, and thus give subtly different results."
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-family:'MS Shell Dlg 2'; font-size:8pt;\">This is a line of text before the inserted text. This is a line of inserted text. This is a line after the inserted text.</span></p>"
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-family:'MS Shell Dlg 2'; font-size:8pt;\">This is a line of text before the deleted text. This is a line of deleted text. This is a line after the deleted text.</span></p>"
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-family:'MS Shell Dlg 2'; font-size:8pt;\">This is a line of text before the format-change text. This is a line of text whose format has been changed. This is a line of text after the format-change text.</span></p>"
"<p style=\" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">It is possible to assign a named style to text and alter the style properties to change all text with that style.</p>"
"\n"
"<p style=\" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Applying a style change will reformat all text that previously got the named style assigned to it. Use the Styles docker to apply styles to text.</p>"
"The image contains pixels with zero alpha channel and non-zero color channels. Krita will have to modify those pixels to have at least some alpha. The initial values will <i>not</i> be reverted on saving the image back.<br/>"
"<br/>"
"This will hardly make any visual difference just keep it in mind.<br/>"
"<br/>"
"<note>Modified alpha will have a range from %1 to %2</note>"
msgstr ""
#. +> trunk5 stable5
#: plugins/impex/exr/exr_converter.cc:340
#, kde-format
msgctxt "@title:window"
msgid "EXR image will be modified"
msgstr ""
#. +> stable5
#: plugins/impex/exr/exr_converter.cc:1219
#, kde-format
msgctxt "@title:window"
msgid "Layers will be lost"
msgstr ""
#. +> trunk5 stable5
#: plugins/impex/exr/exr_converter.cc:1222
#, kde-format
msgctxt "@item:unsupported-node-message"
msgid "%1 (type: \"%2\")"
msgstr ""
#. +> trunk5
#: plugins/impex/exr/exr_converter.cc:1227
#, kde-format
msgctxt "@info"
msgid ""
"<p>The following layers have a type that is not supported by EXR format:</p>"
"<r>"
"<ul>%1</ul>"
"</p>"
"<p><warning>these layers have <b>not</b> been saved to the final EXR file</warning></p>"
msgstr ""
#. +> stable5
#: plugins/impex/exr/exr_converter.cc:1214
#, kde-format
msgctxt "@info"
msgid ""
"<p>The following layers have a type that is not supported by EXR format:</p>"
"<p>"
"<ul>%1</ul>"
"</p>"
"<p><warning>these layers will NOT be saved to the final EXR file</warning></p>"
msgstr ""
#. +> trunk5 stable5
#: plugins/impex/exr/exr_export.cc:90
#, kde-format
msgid "This layer cannot be saved to EXR."
msgstr ""
#. +> stable5
#: plugins/impex/exr/exr_export.cc:91
#, kde-format
msgid "OpenEXR Export Options"
msgstr ""
#. +> trunk5 stable5
#: plugins/impex/exr/exr_export.cc:94
#, kde-format
msgid "The layer does not have an image associated with it."
msgstr ""
#. +> trunk5 stable5
#: plugins/impex/exr/exr_export.cc:98
#, kde-format
msgid "The filename is empty."
msgstr ""
#. +> trunk5 stable5
#: plugins/impex/exr/exr_export.cc:102
#, kde-format
msgid "EXR images cannot be saved remotely."
msgstr ""
#. +> trunk5 stable5
#: plugins/impex/exr/exr_export.cc:106
#, kde-format
msgid "Colorspace not supported: EXR images must be 16 or 32 bits floating point RGB."
msgid "This option will merge all layers. It is advisable to check this option, otherwise other applications might not be able to read your file correctly."
msgid "Indexed PNG images are smaller. If you enabled this option, your image will be analyzed to see whether it is possible to save as an indexed PNG."
"<p><span style=\" font-weight:600;\">PNG</span> files have <span style=\" font-style:italic;\">two</span> options to save <span style=\" font-weight:600;\">sRGB</span> information: as a tag or as an explicit profile. For use with in websites, <span style=\" font-style:italic;\">disable</span> this option. For interchange with other applications, <span style=\" font-style:italic;\">enable</span> this option.</p>"
"<p>If enabled, all RAW files will be decoded in 16-bit color depth using a linear gamma curve. To prevent dark picture rendering in the editor, it is recommended to use Color Management in this mode.</p>"
"<p>If disabled, all RAW files will be decoded in 8-bit color depth with a BT.709 gamma curve and a 99th-percentile white point. This mode is faster than 16-bit decoding.</p>"
"<p>The default is to assume that all green pixels are the same. If even-row green pixels are more sensitive to ultraviolet light than odd-row this difference causes a mesh pattern in the output; using this option solves this problem with minimal loss of detail.</p>"
"<p>To resume, this option blurs the image a little, but it eliminates false 2x2 mesh patterns with VNG quality method or mazes with AHD quality method.</p>"
"<p>For Fuji Super CCD cameras, show the image tilted 45 degrees. For cameras with non-square pixels, do not stretch the image to its correct aspect ratio. In any case, this option guarantees that each output pixel corresponds to one RAW pixel.</p>"
"<p>Select here the demosaicing method to use when decoding RAW images. A demosaicing algorithm is a digital image process used to interpolate a complete image from the partial raw data received from the color-filtered image sensor, internal to many digital cameras, in form of a matrix of colored pixels. Also known as CFA interpolation or color reconstruction, another common spelling is demosaicing. The following methods are available for demosaicing RAW images:</p>"
"<p>"
"<ul>"
"<li><emphasis strong='true'>Bilinear</emphasis>: use high-speed but low-quality bilinear interpolation (default - for slow computers). In this method, the red value of a non-red pixel is computed as the average of the adjacent red pixels, and similarly for blue and green.</li>"
"<li><emphasis strong='true'>VNG</emphasis>: use Variable Number of Gradients interpolation. This method computes gradients near the pixel of interest and uses the lower gradients (representing smoother and more similar parts of the image) to make an estimate.</li>"
"<li><emphasis strong='true'>PPG</emphasis>: use Patterned-Pixel-Grouping interpolation. Pixel Grouping uses assumptions about natural scenery in making estimates. It has fewer color artifacts on natural images than the Variable Number of Gradients method.</li>"
"<li><emphasis strong='true'>AHD</emphasis>: use Adaptive Homogeneity-Directed interpolation. This method selects the direction of interpolation so as to maximize a homogeneity metric, thus typically minimizing color artifacts.</li>"
"<li><emphasis strong='true'>DCB</emphasis>: DCB interpolation from linuxphoto.org project.</li>"
"<li><emphasis strong='true'>AHD v2</emphasis>: modified AHD interpolation using Variance of Color Differences method.</li>"
"<li><emphasis strong='true'>AFD</emphasis>: Adaptive Filtered Demosaicing interpolation through 5 pass median filter from PerfectRaw project.</li>"
"<li><emphasis strong='true'>VCD</emphasis>: Variance of Color Differences interpolation.</li>"
"<li><emphasis strong='true'>VCD & AHD</emphasis>: Mixed demosaicing between VCD and AHD.</li>"
"<li><emphasis strong='true'>LMMSE</emphasis>: color demosaicing via directional linear minimum mean-square error estimation interpolation from PerfectRaw.</li>"
"<li><emphasis strong='true'>AMaZE</emphasis>: Aliasing Minimization interpolation and Zipper Elimination to apply color aberration removal from RawTherapee project.</li>"
"</ul>"
"</p>"
"<p>Note: some methods can be unavailable if RAW decoder have been built without extension packs.</p>"
"<p>Set here the passes used by the median filter applied after interpolation to Red-Green and Blue-Green channels.</p>"
"<p>This setting is only available for specific Quality options: <emphasis strong='true'>Bilinear</emphasis>, <emphasis strong='true'>VNG</emphasis>, <emphasis strong='true'>PPG</emphasis>, <emphasis strong='true'>AHD</emphasis>, <emphasis strong='true'>DCB</emphasis>, and <emphasis strong='true'>VCD & AHD</emphasis>.</p>"
"<li><emphasis strong='true'>Default D65</emphasis>: Use a standard daylight D65 white balance.</li>"
"<li><emphasis strong='true'>Camera</emphasis>: Use the white balance specified by the camera. If not available, reverts to default neutral white balance.</li>"
"<li><emphasis strong='true'>Automatic</emphasis>: Calculates an automatic white balance averaging the entire image.</li>"
"<li><emphasis strong='true'>Manual</emphasis>: Set a custom temperature and green level values.</li>"
msgid "<p>If enabled, images with overblown channels are processed much more accurately, without 'pink clouds' (and blue highlights under tungsten lamps).</p>"
"<p>Select here the noise reduction method to apply during RAW decoding.</p>"
"<p>"
"<ul>"
"<li><emphasis strong='true'>None</emphasis>: no noise reduction.</li>"
"<li><emphasis strong='true'>Wavelets</emphasis>: wavelets correction to erase noise while preserving real detail. It's applied after interpolation.</li>"
"<li><emphasis strong='true'>FBDD</emphasis>: Fake Before Demosaicing Denoising noise reduction. It's applied before interpolation.</li>"
"<li><emphasis strong='true'>CFA Line Denoise</emphasis>: Banding noise suppression. It's applied after interpolation.</li>"
"<li><emphasis strong='true'>Impulse Denoise</emphasis>: Impulse noise suppression. It's applied after interpolation.</li>"
"<p>If this option is turned on, it will try to shift image channels slightly and evaluate Chromatic Aberration change. Note that if you shot blue-red pattern, the method may fail. In this case, disable this option and tune manually color factors.</p>"
"<p>Select here the output color space used to decode RAW data.</p>"
"<p>"
"<ul>"
"<li><emphasis strong='true'>Raw (linear)</emphasis>: in this mode, no output color space is used during RAW decoding.</li>"
"<li><emphasis strong='true'>sRGB</emphasis>: this is an RGB color space, created cooperatively by Hewlett-Packard and Microsoft. It is the best choice for images destined for the Web and portrait photography.</li>"
"<li><emphasis strong='true'>Adobe RGB</emphasis>: this color space is an extended RGB color space, developed by Adobe. It is used for photography applications such as advertising and fine art.</li>"
"<li><emphasis strong='true'>Wide Gamut</emphasis>: this color space is an expanded version of the Adobe RGB color space.</li>"
"<li><emphasis strong='true'>Pro-Photo</emphasis>: this color space is an RGB color space, developed by Kodak, that offers an especially large gamut designed for use with photographic outputs in mind.</li>"
"<li><emphasis strong='true'>Custom</emphasis>: use a custom output color space profile.</li>"
msgid "This determines every interval after which the precision should change. For example: if the delta value is set to be 15.00, after every 15 pts change in the size of brush, the precision will change."
msgid "If checked, grid brush fill every particle's background with background color. The background of particle is rectangle of grid width and height and by default it is transparent."
"<p><b>Painting mode</b>: Krita offers a choice between two painting modes: <i>buildup</i> and <i>wash</i>. The first choice builds up color while painting in one stroke, the second choices gives you an even color in one stroke even if you go over the same place again and again.</p>"
"<p>In \"Global Coordinates\" mode Width and Height fields show the size of the shape's bounding box in image-aligned coordinates, even when the shape is rotated or has any other transform. </p>"
"<p>If \"Global Coordinates\" mode is disabled, Width and Height fields show the shape's \"local\" size, before application of any transformations.</p>"
msgid "Sorry, Krita was built without the support of GNU Scientific Library, so you cannot scale the selection with handles. Please compile Krita with GNU Scientific Library support, or use options widget for editing scale values manually."
msgid "Switch between Build Up and Wash mode of painting. Build Up mode adds deformations one on top of the other without any limits. Wash mode gradually deforms the piece to the selected deformation level."
"If you own an Android device, make sure to install the <a href=\"https://play.google.com/store/apps/details?id=org.kde.kdeconnect_tp\"><span style=\" text-decoration: underline; color:#4c6b8a;\">KDE Connect Android app</span></a> (also available <a href=\"https://f-droid.org/repository/browse/?fdid=org.kde.kdeconnect_tp\"><span style=\" text-decoration: underline; color:#4c6b8a;\">from F-Droid</span></a>) and it should appear in the list.<br>"
"<br>"
"If you are having problems, visit the <a href=\"https://community.kde.org/KDEConnect\"><span style=\" text-decoration: underline; color:#4c6b8a;\">KDE Connect Community wiki</span></a> for help.</p>"
msgid "Copy the code from the web page and paste it in the input field below."
msgstr ""
#. +> trunk5 stable5 stable
#: src/networking/zotero/oauthwizard.cpp:83
#, kde-format
msgid ""
"<qt>"
"<p>Once you have granted permissions to KBibTeX on Zotero's web page, you should see a light-green field with a black hexadecimal code (example: <span style=\"color:black;background:#cfc;\">48b67422661cc282cdea</span>).</p>"
"</qt>"
msgstr ""
#. +> trunk5 stable5 stable
#: src/networking/zotero/oauthwizard.cpp:90
#, kde-format
msgid "Verification Code:"
msgstr ""
#. +> trunk5 stable5 stable
#: src/networking/zotero/oauthwizard.cpp:169
#, kde-format
msgid "Instructions"
msgstr ""
#. +> trunk5 stable5 stable
#: src/networking/zotero/oauthwizard.cpp:170
#, kde-format
msgid "<qt>To allow <strong>KBibTeX</strong> access your <strong>Zotero bibliography</strong>, this KBibTeX instance has to be authorized.</qt>"
msgstr ""
#. +> trunk5 stable5 stable
#: src/networking/zotero/oauthwizard.cpp:171
#, kde-format
msgid ""
"<qt>"
"<p>The process of authorization involves multiple steps:</p>"
"<ol>"
"<li>Open the URL as shown on the next page.</li>"
"<li>Follow the instructions as shown on Zotero's webpage.<br/>"
"Configure permissions for KBibTeX.</li>"
"<li>Eventually, you will get a hexadecimal string (black on light-green background) which you have to copy and paste into this wizard's last page</li>"
"</ol>"
"</qt>"
msgstr ""
#. +> trunk5 stable5 stable
#: src/networking/zotero/oauthwizard.cpp:181
#, kde-format
msgid "Authorization URL"
msgstr ""
#. +> trunk5 stable5 stable
#: src/networking/zotero/oauthwizard.cpp:182
#, kde-format
msgid "Open the shown URL in your favorite browser."
msgstr ""
#. +> trunk5 stable5 stable
#: src/networking/zotero/oauthwizard.cpp:186
#, kde-format
msgid "Copy URL"
msgstr ""
#. +> trunk5 stable5 stable
#: src/networking/zotero/oauthwizard.cpp:190
#, kde-format
msgid "Open URL"
msgstr ""
#. +> trunk5 stable5 stable
#: src/networking/zotero/oauthwizard.cpp:195
#, kde-format
msgid "You will be asked to login into Zotero and select and confirm the permissions for KBibTeX."
"Selecting \"Yes\" will create the payee, \"No\" will skip creation of a payee record and remove the payee information from this transaction. Selecting \"Cancel\" aborts the import operation.\n"
"\n"
"If you select \"No\" here and mark the \"Do not ask again\" checkbox, the payee information for all following transactions referencing \"%1\" will be removed."
msgid "KMyMoney cannot determine which of your accounts to use. You can create a new account by pressing the <b>Create</b> button or select another one manually from the selection box below."
msgid "No account information has been found in the selected statement file. Please select an account using the selection box in the dialog or create a new account by pressing the <b>Create</b> button."
"Please make sure you have a disk inserted and that the drive is ready. Then choose the mount point from either the Choose button or by entering the path in the available box.\n"
"\n"
"Click OK to perform the backup. If your system does not use an automounter, make sure you mark the checkbox below to \"mount this directory before backing up.\""
msgid "At least one transaction/schedule still references the category <b>%1</b>. However, at least one category with the same currency must exist so that the transactions/schedules can be reassigned."
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/dialogs/kcategoryreassigndlg.cpp:105
#, kde-format
msgid "This dialog does not allow new categories to be created. Please pick a category from the list."
msgid "The transactions, schedules and budgets associated with the selected category need to be re-assigned to a different category before the selected category can be deleted. Please select a category from the list below."
msgid "<qt>You have entered a scheduled transaction date of <b>%1</b>. Because the scheduled transaction was last paid on <b>%2</b>, KMyMoney will automatically adjust the scheduled transaction date to the next date unless the last payment date is reset. Do you want to reset the last payment date?</qt>"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/dialogs/keditscheduledlg.cpp:537
#, kde-format
msgid "Reset Last Payment Date"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/dialogs/keditscheduledlg.cpp:547
#: kmymoney/dialogs/keditscheduledlg.cpp:565
#: kmymoney/dialogs/keditscheduledlg.cpp:576
#, kde-format
msgid "Unable to modify scheduled transaction '%1'"
"<p>Please check that all the details in the following dialog are correct and press OK.</p>"
"<p>Editable data can be changed and can either be applied to just this occurrence or for all subsequent occurrences for this schedule. (You will be asked what you intend after pressing OK in the following dialog)</p>"
msgid "Failed to retrieve an exchange rate for %1 from %2. It will be skipped this time."
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/dialogs/kequitypriceupdatedlg.cpp:523
#: kmymoney/dialogs/kequitypriceupdatedlg.cpp:525
#: kmymoney/dialogs/kequitypriceupdatedlg.cpp:544
#, kde-format
msgid "Price Update Failed"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/dialogs/kequitypriceupdatedlg.cpp:525
#, kde-format
msgid "Failed to retrieve a quote for %1 from %2. Press <b>No</b> to remove the online price source from this security permanently, <b>Yes</b> to continue updating this security during future price updates or <b>Cancel</b> to stop the current update operation."
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/dialogs/kequitypriceupdatedlg.cpp:544
#, kde-format
msgid "Cannot update security <b>%1</b>: %2"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/dialogs/kequitypriceupdatedlg.cpp:635
#, kde-format
msgid ""
"For <b>%1</b> on <b>%2</b> price <b>%3</b> already exists.<br>"
"Do you want to replace it with <b>%4</b>?"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/dialogs/kequitypriceupdatedlg.cpp:640
#, kde-format
msgid "Price Already Exists"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/dialogs/kequitypriceupdatedlg.cpp:683
#: kmymoney/dialogs/kequitypriceupdatedlg.cpp:759
#, kde-format
msgid "Price for %1 updated (id %2)"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/dialogs/kequitypriceupdatedlg.cpp:701
#: kmymoney/dialogs/kequitypriceupdatedlg.cpp:779
#, kde-format
msgid "Received a price for %1 (id %2), but this symbol is not on the list. Aborting entire update."
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/dialogs/kequitypriceupdatedlg.cpp:763
#, kde-format
msgid "Received an invalid price for %1, unable to update."
msgid "Enter the id of the key you want to use for data encryption. This can either be an e-mail address or the hexadecimal key id. In case of the key id, do not forget the leading 0x."
msgid "A category named <b>%1</b> already exists. You cannot create a second category with the same name."
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/dialogs/knewaccountdlg.cpp:701
#, kde-format
msgid "You have selected to suppress the display of unused categories in the KMyMoney configuration dialog. The category you just created will therefore only be shown if it is used. Otherwise, it will be hidden in the accounts/categories view."
msgid "To be able to merge previous selected payees, please select a payee from the list below or create a new one."
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/dialogs/kpayeereassigndlg.cpp:45
#, kde-format
msgid "The transactions associated with the selected payees need to be re-assigned to a different payee before the selected payees can be deleted. Please select a payee from the list below."
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/dialogs/kpayeereassigndlg.cpp:120
#, kde-format
msgid "This dialog does not allow new payees to be created. Please pick a payee from the list."
msgid "The transactions associated with the selected tags need to be re-assigned to a different tag before the selected tags can be deleted. Please select a tag from the list below."
msgid "This option hides all categories in the categories view that are not used in at least a single transaction. They are still shown in the category selection lists."
"<p>You have turned on the GPG encryption support. This means, that new files will be stored encrypted.</p>"
"<p>Existing files will not be encrypted automatically. To achieve encryption of existing files, please use the <b>File/Save as...</b> feature and store the file under a different name.<br/>"
"Once confident with the result, feel free to delete the old file and rename the encrypted one to the old name.</p>"
"This page allows you to set the parameters for encrypted file storage of your <b>KMyMoney</b> data based on <b>GPG</b>."
"<p>\n"
"Access to the settings is disabled if <b>GPG</b> could not be detected on your system. In this case, please make sure that <b>GPG</b> is working properly for the current user."
"<p>\n"
"The <i>additional recovery encryption</i> is only accessible, if the necessary key for <b>kmymoney-recover@users.sourceforge.net</b> with id 0x8AFDDC8E is found in your keyring."
msgid "Enter the id of the key you want to use for data encryption. This can either be an e-mail address or the hexadecimal key id. In case of the key id do not forget the leading 0x."
"You can specify to encrypt the data also with the KMyMoney recover key. Only the core KMyMoney developers are in posession of the respective private key required to read back such encrypted data."
"<p>\n"
"\n"
"This mechanism is provided for the case that you have lost your key and cannot access your data anymore. With this option activated, the KMyMoney developers can decrypt the data and supply you with it in a readable form. Please be prepared, that you have to answer a few detailed questions about the contents of your data before we will send it out."
msgid "<i>Enter regular expressions which can be used to parse the data returned from the URL entered above. The symbol, price, and date must be found in the quote data to be usable. You may also try the KMyMoney user's mailinglist at <a href=\"mailto:kmymoney@kde.org\">kmymoney@kde.org</a> to find what settings work for other users in your country.</i>"
msgid "Enter the URL from which stock quotes will be fetched. <b>%1</b> will be replaced with the symbol for the security being quoted. For currency conversions, <b>%2</b> will be replaced with the currency to be quoted and <b>%1</b> with the currency the quote is based on."
"<p>For easier processing of the data returned by the online source, KMyMoney usually strips unused parts before it is parsed with the regular expressions. If matching of the fields relies on those items, then use this option to turn stripping off.</p>"
"\n"
"\n"
"<p>The following items are usually removed by stripping:\n"
"\n"
"<ul>\n"
"<li>HTML tags such as <b><tag></b></li>"
"\n"
"<li>& encoded characters such as <b>&nbsp;</b></li>"
msgid "Using the ledger lens shows the details for the transaction that has focus in the ledger. Usually, when using the transaction form, only a one line summary is displayed for each transaction as the details are shown in the form."
msgstr ""
#. i18n: ectx: label, entry (TransactionForm), group (General Options)
msgid "Use the <i>left</i> and <i>right</i> buttons to add and remove sort options. Use the <i>up</i> and <i>down</i> buttons to modify the sort order. Double-Click a selected entry to toggle the sort order between <i>ascending</i> and <i>descending</i>."
msgid "After entering the reconciliation data automatically detect the transactions that match that data (in some cases it might be not possible to do that)."
"Collect all transactions for the given payee. Treat all transactions that refer to the same category and have an amount with +/- X % as identical. If more than one transaction is found, a list of them is presented to the user.\n"
msgid "Two transactions are usually treated identical for autofill, if they refer the same accounts. They are treated as different transactions though, when their amount varies by more than the percentage given here."
msgid "If this option is checked the memos from the previous transaction will be used otherwise the memos will not be considered when the transaction is autofilled."
msgid "Whenever a new payee is detected during import of a statement, the user will be asked to assign a default category for this user when this option is selected."
msgid "Cannot enter transaction with postdate prior to account's opening date."
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/dialogs/stdtransactioneditor.cpp:1559
#, kde-format
msgid ""
"Do you want to replace memo"
"<p><i>%1</i></p>"
"with memo"
"<p><i>%2</i></p>"
"in the other split?"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/dialogs/stdtransactioneditor.cpp:1559
#, kde-format
msgid "Copy memo"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/dialogs/transactioneditor.cpp:335
#: kmymoney/dialogs/transactioneditor.cpp:535
#, kde-format
msgid "<center>Processing schedule for %1.</center>"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/dialogs/transactioneditor.cpp:339
#, kde-format
msgid ""
"<center>Check number <b>%1</b> has already been used in account <b>%2</b>.</center>"
"<center>Do you want to replace it with the next available number?</center>"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/dialogs/transactioneditor.cpp:340
#: kmymoney/dialogs/transactioneditor.cpp:540
#, kde-format
msgid "Duplicate number"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/dialogs/transactioneditor.cpp:478
#, kde-format
msgid "This transaction has more than two splits and is originally based on a different currency (%1). Using this account to modify the transaction may result in rounding errors. Do you want to continue?"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/dialogs/transactioneditor.cpp:480
#, kde-format
msgid "At least one of the selected transactions has more than two splits and is originally based on a different currency (%1). Using this account to modify the transactions may result in rounding errors. Do you want to continue?"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/dialogs/transactioneditor.cpp:539
#, kde-format
msgid ""
"Check number <b>%1</b> has already been used in account <b>%2</b>."
"<center>Do you want to replace it with the next available number?</center>"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/dialogs/transactioneditor.cpp:647
#, kde-format
msgid "Storing transactions"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/dialogs/transactioneditor.cpp:689
#, kde-format
msgid "&Enter"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/dialogs/transactioneditor.cpp:692
#, kde-format
msgid "Use this to enter the transaction into the ledger."
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/dialogs/transactioneditor.cpp:693
#, kde-format
msgid "&Schedule"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/dialogs/transactioneditor.cpp:695
#, kde-format
msgid "Accepts the entered data and stores it as schedule"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/dialogs/transactioneditor.cpp:696
#, kde-format
msgid "Use this to schedule the transaction for later entry into the ledger."
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/dialogs/transactioneditor.cpp:698
#, kde-format
msgid ""
"The transaction you are about to enter has a post date in the future.<br/>"
"<br/>"
"Do you want to enter it in the ledger or add it to the schedules?"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/dialogs/transactioneditor.cpp:698
#, kde-format
msgctxt "Dialog caption for 'Enter or schedule' dialog"
msgid "Enter or schedule?"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/dialogs/transactioneditor.cpp:782
#, kde-format
msgid "The balance of account <b>%1</b> dropped below the warning balance of %2."
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/dialogs/transactioneditor.cpp:788
#, kde-format
msgid "The balance of account <b>%1</b> dropped below the minimum balance of %2."
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/dialogs/transactioneditor.cpp:794
#, kde-format
msgid "The balance of account <b>%1</b> dropped below the maximum credit warning limit of %2."
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/dialogs/transactioneditor.cpp:800
#, kde-format
msgid "The balance of account <b>%1</b> dropped below the maximum credit limit of %2."
msgstr ""
#. +> stable
#: kmymoney/dialogs/transactionmatcher.cpp:82
#, kde-format
msgid "The transaction dates are one day apart. Do you want to match them anyway?"
msgid_plural "The transaction dates are %1 days apart. Do you want to match them anyway?"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5 stable
#: kmymoney/dialogs/transactionmatcher.cpp:101
#, kde-format
msgid "First transaction does not match requirement for matching"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/dialogs/transactionmatcher.cpp:105
#, kde-format
msgid "Splits for %1 have conflicting values (%2,%3)"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/dialogs/transactionmatcher.cpp:120
#, kde-format
msgid "Unable to match all splits (%1)"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/kcreditswindow.cpp:44
#, kde-format
msgid "Addressbook integration"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/kcreditswindow.cpp:47
#, kde-format
msgid "Holiday regions integration"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/kcreditswindow.cpp:50
#, kde-format
msgid ""
"\n"
"KMyMoney, the Personal Finance Manager by KDE.\n"
"\n"
"Please consider contributing to this project with code and/or suggestions."
msgstr ""
#. +> stable
#: kmymoney/main.cpp:72
#, kde-format
msgid ""
"\n"
"KMyMoney, the Personal Finance Manager for KDE.\n"
"\n"
"Please consider contributing to this project with code and/or suggestions."
msgstr ""
#. +> trunk5 stable5
#: kmymoney/kcreditswindow.cpp:52
#, kde-format
msgid "(c) 2000-2018 The KMyMoney development team"
msgstr ""
#. +> stable
#: kmymoney/main.cpp:73
#, kde-format
msgid "(c) 2000-2017 The KMyMoney development team"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/kcreditswindow.cpp:55
#, kde-format
msgid ""
"Compiled with the following optional features:\n"
msgid "You have configured KMyMoney to use GPG to protect your data and to encrypt your data also with the KMyMoney recover key. This key is about to expire in %1 day. Please update the key from a keyserver using your GPG frontend (e.g. KGPG)."
msgid_plural "You have configured KMyMoney to use GPG to protect your data and to encrypt your data also with the KMyMoney recover key. This key is about to expire in %1 days. Please update the key from a keyserver using your GPG frontend (e.g. KGPG)."
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5 stable
#: kmymoney/kmymoney.cpp:2006
#, kde-format
msgid "Recover key expires soon"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/kmymoney.cpp:2019
#, kde-format
msgid "The file must be saved first before it can be backed up. Do you want to continue?"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/kmymoney.cpp:2035
#, kde-format
msgid "The current implementation of the backup functionality only supports local files as source files. Your current source file is '%1'."
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/kmymoney.cpp:2037
#, kde-format
msgid "Local files only"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/kmymoney.cpp:2073
#, kde-format
msgid "Mounting %1"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/kmymoney.cpp:2089
#, kde-format
msgid "Backup file for today exists on that device. Replace?"
msgid "You cannot import GnuCash data into an existing file. Do you wish to save this file?"
msgstr ""
#. +> stable
#: kmymoney/kmymoney.cpp:2326
#, kde-format
msgid "Importing a GnuCash file."
msgstr ""
#. +> stable
#: kmymoney/kmymoney.cpp:2329
#, kde-format
msgid ""
"*|GnuCash files\n"
"*|All files"
msgstr ""
#. +> stable
#: kmymoney/kmymoney.cpp:7433
#, kde-format
msgid "Unable to setup online parameters for account '%1'"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/kmymoney.cpp:2347
#, kde-format
msgid "Running automatic reconciliation"
msgstr ""
#. +> stable
#: kmymoney/kmymoney.cpp:2368
#, kde-format
msgid ""
"*.xml|XML files\n"
"*|All files"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/kmymoney.cpp:2460
#, kde-format
msgid "<p><b>%1</b> cannot be moved to institution <b>%2</b>. Reason: %3</p>"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/kmymoney.cpp:2473
#, kde-format
msgid "<p><b>%1</b> cannot be moved to <b>%2</b>. Reason: %3</p>"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/kmymoney.cpp:2567
#, kde-format
msgid "Untitled"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/kmymoney.cpp:2617
#, kde-format
msgid "Create a new transaction"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/kmymoney.cpp:2736
#, kde-format
msgid "Running consistency check..."
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/kmymoney.cpp:2743
#, kde-format
msgid "Consistency check failed: %1"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/kmymoney.cpp:2753
#, kde-format
msgid "The consistency check has found no issues in your data. Details are presented below."
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/kmymoney.cpp:2755
#, kde-format
msgid "The consistency check has found some issues in your data. Details are presented below. Those issues that could not be corrected automatically need to be solved by the user."
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/kmymoney.cpp:2758
#, kde-format
msgid "Consistency check result"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/kmymoney.cpp:2842
#, kde-format
msgid "Checking for overdue scheduled transactions..."
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/kmymoney.cpp:3006
#, kde-format
msgid "You must first select a KMyMoney file before you can import a statement."
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/kmymoney.cpp:3011
#, kde-format
msgid "Importing a statement via Web Connect"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/kmymoney.cpp:3021
#, kde-format
msgid "Unable to import %1 using %2 plugin. The plugin returned the following error: %3"
msgid "Do you really want to remove the mapping of account <b>%1</b> to an online account? Depending on the details of the online banking method used, this action cannot be reverted."
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/kmymoney.cpp:3127
#, kde-format
msgid "Remove mapping to online account"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/kmymoney.cpp:3140
#, kde-format
msgid "Unable to unmap account from online account: %1"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/kmymoney.cpp:3156
#, kde-format
msgid " (Brokerage)"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/kmymoney.cpp:3157
#, kde-format
msgid "You try to map a brokerage account to an online account. This is usually not advisable. In general, the investment account should be mapped to the online account. Please cancel if you intended to map the investment account, continue otherwise"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/kmymoney.cpp:3157
#, kde-format
msgid "Mapping brokerage account"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/kmymoney.cpp:3173
#, kde-format
msgid "Select online banking plugin"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/kmymoney.cpp:3214
#, kde-format
msgid "Unable to map account to online account: %1"
msgstr ""
#. +> stable
#: kmymoney/kmymoney.cpp:3244
#, kde-format
msgid "The security <b>%1</b> currently does not exist as sub-account of <b>%2</b>. Do you want to create it?"
msgid "The statements have been processed with the following results:"
msgstr ""
#. +> stable
#: kmymoney/kmymoney.cpp:3465
#, kde-format
msgid "Adjusting budgets..."
msgstr ""
#. +> stable
#: kmymoney/kmymoney.cpp:3507
#, kde-format
msgid "Do you really want to delete category <b>%1</b>?"
msgstr ""
#. +> stable
#: kmymoney/kmymoney.cpp:3514
#, kde-format
msgid "Unable to delete category <b>%1</b>. Cause: %2"
msgstr ""
#. +> stable
#: kmymoney/kmymoney.cpp:3525
#, kde-format
msgid "Do you want to delete category <b>%1</b> with all its sub-categories or only the category itself? If you only delete the category itself, all its sub-categories will be made sub-categories of <b>%2</b>."
msgstr ""
#. +> stable
#: kmymoney/kmymoney.cpp:3579
#, kde-format
msgid "Unable to delete a sub-category of category <b>%1</b>. Reason: %2"
msgstr ""
#. +> stable
#: kmymoney/kmymoney.cpp:3589
#, kde-format
msgid "<p>Do you really want to delete account <b>%1</b>?</p>"
msgstr ""
#. +> stable
#: kmymoney/kmymoney.cpp:4231
#, kde-format
msgid "You have closed this account. It remains in the system because you have transactions which still refer to it, but it is not shown in the views. You can make it visible again by going to the View menu and selecting <b>Show all accounts</b> or by deselecting the <b>Do not show closed accounts</b> setting."
msgstr ""
#. +> stable
#: kmymoney/kmymoney.cpp:4378
#, kde-format
msgid "You have entered a scheduled transaction date of <b>%1</b>. Because the scheduled transaction was last paid on <b>%2</b>, KMyMoney will automatically adjust the scheduled transaction date to the next date unless the last payment date is reset. Do you want to reset the last payment date?"
msgstr ""
#. +> stable
#: kmymoney/kmymoney.cpp:4494
#, kde-format
msgid "Do you really want to skip the <b>%1</b> transaction scheduled for <b>%2</b>?"
msgstr ""
#. +> stable
#: kmymoney/kmymoney.cpp:4663
#, kde-format
msgid "Do you want to add <b>%1</b> as payer/receiver?"
msgid "dump the names of all defined QAction objects to stdout and quit"
msgstr ""
#. +> stable
#: kmymoney/main.cpp:109
#, kde-format
msgid "dump the names of all defined KAction objects to stdout and quit"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/main.cpp:127
#, kde-format
msgid "file to open"
msgstr ""
#. +> stable
#: kmymoney/main.cpp:127
#, kde-format
msgid "The monetary decimal symbol is not correctly set in the KDE System Settings module Country/Region & Language. Please set it to a reasonable value and start KMyMoney again."
msgstr ""
#. +> stable
#: kmymoney/main.cpp:127
#, kde-format
msgid "Invalid settings"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/main.cpp:230
#, kde-format
msgid "Uncaught error. Please report the details to the developers"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/main.cpp:231
#, kde-format
msgid "%1 in file %2 line %3"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/main.cpp:260
#, kde-format
msgid "Another instance of KMyMoney is already running. Do you want to quit?"
"From this dialog you are able to export transactions to a comma separated file, (known as a CSV file, because of the extension). However, you are able to specify an alternative separator below. Please enter the path to the CSV file or select it by clicking on the Browse button.\n"
"\n"
"You can choose the file's path, and the account. Choose Account to export all the transactions between the specified dates, or just choose to export Categories."
"The date entry \"%1\" read from the file cannot be interpreted through the current date format setting of \"%2.\"\n"
"\n"
"Pressing 'Continue' will assign today's date to the transaction. Pressing 'Cancel'' will abort the import operation. You can then restart the import and select a different date format."
msgstr ""
#. +> stable
#: kmymoney/plugins/csvimport/csvdialog.cpp:1514
#, kde-format
msgid "<center>There must an amount or debit and credit fields, plus date and payee fields.</center>"
msgstr ""
#. +> stable
#: kmymoney/plugins/csvimport/csvdialog.cpp:1516
#, kde-format
msgid "<center>As you had skipped Setup, the wizard will now return you to the setups.</center>"
msgid "You selected to extract the payee from the memo field but did not supply a regular expression for payee and memo extraction. The option will not be activated."
msgid "The plugin usually downloads the account balance and transactions. In some circumstances, the download of transaction data is not supported for certain accounts. The following option allows to turn off the request for transaction data."
msgid "Please enter the username and password you use to log into this bank for online banking. Please note that many banks require a separate signup, and assign a separate PIN or password just for online banking from home."
msgid "If a QIF file contains date entries with years represented with two digits then either an apostrophe or a slash may be used to delimit the year in the dates for certain centuries. This enables 1905 to be distinguished from 2005. Specify here which range of years will have year delimited by an apostrophe (eg. for Quicken this is usually 1900-1949)."
"From this dialog you are able to export transactions to a quicken compatible file, (known as a QIF file, because of the extension). Please enter the path to the QIF file or select it by clicking on the Browse button.\n"
"\n"
"You can choose the file's path, the account and the format of the QIF file (profile). Choose Account to export all the transactions between the specified dates or just categories. You can also limit the transactions that are exported by start and ending date. Once you have pressed the Export button a message box will appear when the export has completed detailing how many transactions, categories and payees were exported."
"<p>From this dialog you are able to import transactions from a Quicken<b>™</b> compatible file, (known as a QIF file, because of the extension).</p>"
"\n"
"<p>Please enter the path to the QIF file or select it by clicking on the Browse button. Once you have the file's path press the Import button and KMyMoney will import all the transactions, categories and payees it finds.</p>"
msgid "Select <b>Bank statement</b> turns on automatic category matching which is turned off in case of <b>Other application</b>. Use the latter if you import files from other Personal Finance Management software."
msgid "The %1 account currently has an opening balance of %2. This QIF file reports an opening balance of %3. Would you like to overwrite the current balance with the one from the QIF file?"
msgid "KMyMoney has imported a second opening balance transaction into account <b>%1</b> which differs from the one found already on file. Please correct this manually once the import is done."
"The date entry \"%1\" read from the file cannot be interpreted through the current date profile setting of \"%2\".\n"
"\n"
"Pressing \"Continue\" will assign todays date to the transaction. Pressing \"Cancel\" will abort the import operation. You can then restart the import and select a different QIF profile or create a new one."
msgid "Autogenerated by QIF importer from type Mutual account entry"
msgstr ""
#. +> stable
#: kmymoney/converter/mymoneyqifreader.cpp:2093
#: kmymoney/converter/mymoneyqifreader.cpp:2224
#, kde-format
msgid "account"
msgstr ""
#. +> stable
#: kmymoney/converter/mymoneyqifreader.cpp:2094
#, kde-format
msgid "al"
msgstr ""
#. +> stable
#: kmymoney/converter/mymoneyqifreader.cpp:2101
#, kde-format
msgid "category"
msgstr ""
#. +> stable
#: kmymoney/converter/mymoneyqifreader.cpp:2102
#, kde-format
msgid "ei"
msgstr ""
#. +> stable
#: kmymoney/converter/mymoneyqifreader.cpp:2119
#, kde-format
msgid "Account \"%1\" disappeared: %2"
msgstr ""
#. +> stable
#: kmymoney/converter/mymoneyqifreader.cpp:2141
#, kde-format
msgctxt "The 'type of object' 'x' does not exist"
msgid "The %1 '%2' does not exist. Do you want to create it?"
msgstr ""
#. +> stable
#: kmymoney/converter/mymoneyqifreader.cpp:2151
#, kde-format
msgctxt "To select account"
msgid "Select %1"
msgstr ""
#. +> stable
#: kmymoney/converter/mymoneyqifreader.cpp:2153
#, kde-format
msgid "The %1 <b>%2</b> currently exists. Do you want to import transactions to this account?"
msgstr ""
#. +> stable
#: kmymoney/converter/mymoneyqifreader.cpp:2157
#, kde-format
msgid "The %1 <b>%2</b> currently does not exist. You can create a new %3 by pressing the <b>Create</b> button or select another %4 manually from the selection box."
msgid "All values shown in %1 unless otherwise noted"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/reports/reporttable.cpp:148
#, kde-format
msgid "Unable to generate report"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/reports/reporttable.cpp:149
#, kde-format
msgid ""
"There was an error creating your report: \"%1\".\n"
"Please report this error to the developer's list: kmymoney-devel@kde.org"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kaccountsview.cpp:290
#, kde-format
msgid "Unable to delete account '%1'. Cause: %2"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kaccountsview.cpp:304
#, kde-format
msgid "<qt>You have closed this account. It remains in the system because you have transactions which still refer to it, but it is not shown in the views. You can make it visible again by going to the View menu and selecting <b>Show all accounts</b> or by deselecting the <b>Do not show closed accounts</b> setting.</qt>"
msgid "Accepts the entered values and stores the budget"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kbudgetview.cpp:345
#, kde-format
msgid "A budget with the name '%1' already exists. It is not advisable to have multiple budgets with the same identification name. Are you sure you would like to rename the budget?"
msgid "Unable to exchange category <b>%1</b> with category <b>%2</b>. Reason: %3"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kcategoriesview.cpp:369
#, kde-format
msgid "<qt>Do you really want to delete category <b>%1</b>?</qt>"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kcategoriesview.cpp:376
#, kde-format
msgid "<qt>Unable to delete category <b>%1</b>. Cause: %2</qt>"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kcategoriesview.cpp:387
#, kde-format
msgid "<qt>Do you want to delete category <b>%1</b> with all its sub-categories or only the category itself? If you only delete the category itself, all its sub-categories will be made sub-categories of <b>%2</b>.</qt>"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kcategoriesview.cpp:391
#, kde-format
msgid "Delete all"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kcategoriesview.cpp:392
#, kde-format
msgid "Just the category"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kcategoriesview.cpp:420
#, kde-format
msgid "<p>Some sub-categories of category <b>%1</b> cannot be deleted, because they are still used. They will be made sub-categories of <b>%2</b>. Proceed?</p>"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kcategoriesview.cpp:440
#, kde-format
msgid "<qt>Unable to delete a sub-category of category <b>%1</b>. Reason: %2</qt>"
msgid "Cannot edit investment transactions and non-investment transactions together."
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kgloballedgerview.cpp:1149
#, kde-format
msgid "Cannot edit multiple split transactions at once."
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kgloballedgerview.cpp:1170
#, kde-format
msgid "Cannot edit investment transactions in the context of this account."
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kgloballedgerview.cpp:1302
#: kmymoney/views/kgloballedgerview.cpp:1305
#, kde-format
msgid ""
"<p>Please select what you want to do: discard the changes, save the changes or continue to edit the transaction.</p>"
"<p>You can also set an option to save the transaction automatically when e.g. selecting another transaction.</p>"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kgloballedgerview.cpp:1302
#: kmymoney/views/kgloballedgerview.cpp:1305
#, kde-format
msgid "End transaction edit"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kgloballedgerview.cpp:1405
#, kde-format
msgid "At least one split of the selected transactions has been reconciled. Do you wish to delete the transactions anyway?"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kgloballedgerview.cpp:1411
#, kde-format
msgid "Do you really want to delete the selected transaction?"
msgid_plural "Do you really want to delete all %1 selected transactions?"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kgloballedgerview.cpp:1415
#, kde-format
msgid "Delete transaction"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kgloballedgerview.cpp:1461
#, kde-format
msgid "Unable to duplicate transaction(s): %1, thrown in %2:%3"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kgloballedgerview.cpp:1536
#, kde-format
msgid "Unable to accept transaction: %1, thrown in %2:%3"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kgloballedgerview.cpp:1575
#: kmymoney/views/kgloballedgerview_p.h:1359
#, kde-format
msgid "Unable to modify transaction: %1, thrown in %2:%3"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kgloballedgerview.cpp:1831
#, kde-format
msgid ""
"You are about to finish the reconciliation of this account with a difference between your bank statement and the transactions marked as cleared.\n"
"Are you sure you want to finish the reconciliation?"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kgloballedgerview.cpp:1833
#, kde-format
msgid "Confirm end of reconciliation"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kgloballedgerview_p.h:682
#, kde-format
msgid "Statement Details"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kgloballedgerview_p.h:686
#, kde-format
msgid "Statement Deposit Details"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kgloballedgerview_p.h:687
#, kde-format
msgid "Statement Payment Details"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kgloballedgerview_p.h:804
#: kmymoney/views/kgloballedgerview_p.h:816
#, kde-format
msgid "%1 deposit (%2)"
msgid_plural "%1 deposits (%2)"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kgloballedgerview_p.h:806
#: kmymoney/views/kgloballedgerview_p.h:812
#, kde-format
msgid "%1 payment (%2)"
msgid_plural "%1 payments (%2)"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kgloballedgerview_p.h:809
#, kde-format
msgctxt "%1 is a string, e.g. 7 deposits; %2 is a string, e.g. 4 payments"
msgid "%1, %2"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kgloballedgerview_p.h:912
#: kmymoney/views/kgloballedgerview_p.h:932
#, kde-format
msgid "Go to '%1'"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kgloballedgerview_p.h:985
#, kde-format
msgid "Statement: %1"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kgloballedgerview_p.h:986
#: kmymoney/views/kgloballedgerview_p.h:1002
#, kde-format
msgctxt "Cleared balance"
msgid "Cleared: %1"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kgloballedgerview_p.h:994
#, kde-format
msgid "Last reconciled: %1"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kgloballedgerview_p.h:996
#, kde-format
msgid "Never reconciled"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kgloballedgerview_p.h:1110
#, kde-format
msgid "Cannot process transactions in account %1, which is closed."
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kgloballedgerview_p.h:1116
#, kde-format
msgid "Cannot process transaction with focus if it is not selected."
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kgloballedgerview_p.h:1197
#, kde-format
msgid "Unable to delete transaction(s): %1, thrown in %2:%3"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kgloballedgerview_p.h:1226
#, kde-format
msgid "Unable to unmatch the selected transactions"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kgloballedgerview_p.h:1276
#, kde-format
msgid "No manually entered transaction selected for matching"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kgloballedgerview_p.h:1278
#, kde-format
msgid "No imported transaction selected for matching"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kgloballedgerview_p.h:1284
#, kde-format
msgid "Unable to match the selected transactions"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/khomeview.cpp:162
#, kde-format
msgid "Before KMyMoney can give you detailed information about your financial status, you need to create at least one account. Until then, KMyMoney shows the welcome page instead."
msgid "Modifying transactions can only be performed in the ledger view"
msgstr ""
#. +> stable
#: kmymoney/views/kmymoneyview.cpp:442
#, kde-format
msgid "Duplicating transactions can only be performed in the ledger view"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kmymoneyview.cpp:447
#, kde-format
msgid "Do you want to show <b>%1</b> column on every loaded view?"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kmymoneyview.cpp:449
#, kde-format
msgid "Do you want to hide <b>%1</b> column on every loaded view?"
msgstr ""
#. +> stable
#: kmymoney/views/kmymoneyview.cpp:454
#, kde-format
msgid "Edit the current selected transactions"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kmymoneyview.cpp:723
#, kde-format
msgid "<p><b>%1</b> is not a KMyMoney file.</p>"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kmymoneyview.cpp:759
#, kde-format
msgid "GPG is not available for decryption of file <b>%1</b>"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kmymoneyview.cpp:833
#, kde-format
msgid "File <b>%1</b> contains the old binary format used by KMyMoney. Please use an older version of KMyMoney (0.8.x) that still supports this format to convert it to the new XML based format."
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kmymoneyview.cpp:835
#, kde-format
msgid "File <b>%1</b> contains an unknown file format."
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kmymoneyview.cpp:840
#, kde-format
msgid "Cannot read from file <b>%1</b>."
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kmymoneyview.cpp:844
#, kde-format
msgid "Cannot load file <b>%1</b>. Reason: %2"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kmymoneyview.cpp:855
#, kde-format
msgid "The following error was encountered while decrypting file <b>%1</b>: %2"
msgid "GPG does not seem to be installed on your system. Please make sure that GPG can be found using the standard search path. This time, encryption is disabled."
msgstr ""
#. +> stable
#: kmymoney/views/kmymoneyview.cpp:1132
#, kde-format
msgid "GPG does not seem to be installed on your system. Please make sure, that GPG can be found using the standard search path. This time, encryption is disabled."
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kmymoneyview.cpp:1173
#, kde-format
msgid "GPG not found"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kmymoneyview.cpp:1179
#, kde-format
msgid ""
"<p>You have selected to encrypt your data also with the KMyMoney recover key, but the key with id</p>"
"<p>"
"<center><b>%1</b></center>"
"</p>"
"<p>has not been found in your keyring at this time. Please make sure to import this key into your keyring. You can find it on the <a href=\"https://kmymoney.org/\">KMyMoney web-site</a>. This time your data will not be encrypted with the KMyMoney recover key.</p>"
msgstr ""
#. +> stable
#: kmymoney/views/kmymoneyview.cpp:1139
#, kde-format
msgid ""
"<p>You have selected to encrypt your data also with the KMyMoney recover key, but the key with id</p>"
"<p>"
"<center><b>%1</b></center>"
"</p>"
"<p>has not been found in your keyring at this time. Please make sure to import this key into your keyring. You can find it on the <a href=\"http://kmymoney.org/\">KMyMoney web-site</a>. This time your data will not be encrypted with the KMyMoney recover key.</p>"
"<p>You have specified to encrypt your data for the user-id</p>"
"<p>"
"<center><b>%1</b>.</center>"
"</p>"
"<p>Unfortunately, a valid key for this user-id was not found in your keyring. Please make sure to import a valid key for this user-id. This time, encryption is disabled.</p>"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kmymoneyview.cpp:1193
#, kde-format
msgid "<p>You have configured to save your data in encrypted form using GPG. Make sure you understand that you might lose all your data if you encrypt it, but cannot decrypt it later on. If unsure, answer <b>No</b>.</p>"
msgid "Tried to access a file when it has not been opened"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kmymoneyview.cpp:1305
#, kde-format
msgid "Malformed URL '%1'"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kmymoneyview.cpp:1354
#, kde-format
msgid ""
"Database contains data which must be removed before using Save As.\n"
"Do you wish to continue?"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kmymoneyview.cpp:1370
#, kde-format
msgid ""
"Cannot open or create database %1.\n"
"Retry Save As Database and click Help for further info."
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kmymoneyview.cpp:1389
#, kde-format
msgid ""
"An unrecoverable error occurred while writing to the database.\n"
"It may well be corrupt."
msgstr ""
#. +> stable
#: kmymoney/views/kmymoneyview.cpp:1506
#, kde-format
msgid "Bitcoin Cash"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kmymoneyview.cpp:1852
#, kde-format
msgid ""
"<p>The account \"%1\" was previously created as loan account but some information is missing.</p>"
"<p>The new loan wizard will be started to collect all relevant information.</p>"
"<p>Please use KMyMoney version 0.8.7 or later and earlier than version 0.9 to correct the problem.</p>"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kmymoneyview.cpp:1854
#, kde-format
msgid "Account problem"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kmymoneyview.cpp:1898
#, kde-format
msgid "Unable to add schedule: %1"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kmymoneyview.cpp:1916
#, kde-format
msgid "Fix transactions"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/konlinejoboutbox.cpp:180
#, kde-format
msgid "This job cannot be edited anymore because is was sent already."
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/konlinejoboutbox.cpp:187
#, kde-format
msgid "The plugin to edit this job is not available."
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/konlinejoboutbox.cpp:191
#, kde-format
msgid "You must select a single job for editing."
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/konlinejoboutbox.cpp:297
#, kde-format
msgctxt "The user selected credit transfers to send. But they cannot be sent."
msgid "Cannot send selection"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/konlinejoboutbox.cpp:298
#, kde-format
msgid "Not all selected credit transfers can be sent because some of them are invalid or were already sent."
msgstr ""
#. +> stable
#: kmymoney/views/kpayeesview.cpp:151
#, kde-format
msgctxt "Update payee"
msgid "Update"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kpayeesview.cpp:178
#, kde-format
msgid "A payee with the name '%1' already exists. It is not advisable to have multiple payees with the same identification name. Are you sure you would like to rename the payee?"
msgid "This list contains the names that will match this payee if a transaction is imported from an external source. Keep in mind, that you can specify regular expressions here."
msgid "At least one transaction/scheduled transaction or loan account is still referenced by a payee. Currently you have all payees selected. However, at least one payee must remain so that the transaction/scheduled transaction or loan account can be reassigned."
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kpayeesview_p.h:604
#, kde-format
msgid "Unable to reassign payee of transaction/split"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kpayeesview_p.h:609
#, kde-format
msgid "Nothing to merge."
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kpayeesview_p.h:667
#, kde-format
msgid "Unable to remove payee(s)"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kreportsview.cpp:205
#, kde-format
msgid "Unknown command '%1' in KReportsView::slotOpenUrl()"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kreportsview.cpp:210
#, kde-format
msgid "Unknown view '%1' in KReportsView::slotOpenUrl()"
msgid "Unable to enter scheduled transaction '%1'"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kscheduledview_p.h:540
#, kde-format
msgid ""
"Are you sure you wish to stop this scheduled transaction from being entered into the register?\n"
"\n"
"KMyMoney will prompt you again next time it starts unless you manually enter it later."
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kscheduledview_p.h:643
#, kde-format
msgid "<qt>Do you really want to skip the <b>%1</b> transaction scheduled for <b>%2</b>?</qt>"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kscheduledview_p.h:653
#, kde-format
msgid "<qt>Unable to skip scheduled transaction <b>%1</b>.</qt>"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/ktagsview.cpp:124
#, kde-format
msgid "A tag with the name '%1' already exists. It is not advisable to have multiple tags with the same identification name. Are you sure you would like to rename the tag?"
msgid "Do you want to save the changes for <b>%1</b>?"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/ktagsview.cpp:620
#, kde-format
msgid "<p>Do you really want to remove the tag <b>%1</b>?</p>"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/ktagsview.cpp:622
#, kde-format
msgid "Do you really want to remove all selected tags?"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/ktagsview.cpp:624
#, kde-format
msgid "Remove Tag"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/ktagsview.cpp:661
#, kde-format
msgid "At least one transaction/scheduled transaction is still referenced by a tag. Currently you have all tags selected. However, at least one tag must remain so that the transaction/scheduled transaction can be reassigned."
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/ktagsview.cpp:726
#, kde-format
msgid "Unable to reassign tag of transaction/split"
msgid "The free, easy to use, personal finance manager by KDE"
msgstr ""
#. +> stable
#: kmymoney/views/kwelcomepage.cpp:69
#, kde-format
msgid "The free, easy to use, personal finance manager for KDE"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kwelcomepage.cpp:85
#, kde-format
msgid "Go to My Financial Summary"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kwelcomepage.cpp:98
#, kde-format
msgid "Start with one of the following activities..."
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kwelcomepage.cpp:104
#, kde-format
msgid "Get started and setup accounts"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kwelcomepage.cpp:107
#, kde-format
msgid "Open an existing data file"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kwelcomepage.cpp:110
#, kde-format
msgid "Learn how to use KMyMoney"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kwelcomepage.cpp:113
#, kde-format
msgid "Visit our website"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kwelcomepage.cpp:116
#, kde-format
msgid "Get help from our community"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kwelcomepage.cpp:119
#, kde-format
msgid "See what's new in this version"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kwelcomepage.cpp:155
#, kde-format
msgid "What's new in this version"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kwelcomepage.cpp:169
#, kde-format
msgid "What's new in KMyMoney %1"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kwelcomepage.cpp:172
#, kde-format
msgid "Return to the Welcome page"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kwelcomepage.cpp:181
#, kde-format
msgid "We are pleased to announce a major step forward for what has been described as \"the BEST personal finance manager for FREE users\"."
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kwelcomepage.cpp:182
#, kde-format
msgid "What's new in this version:"
msgstr ""
#. +> stable
#: kmymoney/views/kwelcomepage.cpp:210
#, kde-format
msgid "A plugin to import data using Weboob was added"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kwelcomepage.cpp:211
#, kde-format
msgid "Let us know what you think. We hope that you enjoy using the application."
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kwelcomepage.cpp:212
#, kde-format
msgid "Please let us know about any abnormal behavior in the program by selecting <a href=\"/action?id=help_report_bug\">\"Report bug...\"</a> from the help menu or by sending an e-mail to the developers mailing list."
msgstr ""
#. +> stable
#: kmymoney/views/kwelcomepage.cpp:212
#, kde-format
msgid "When an account cannot be closed, a tooltip explains the reason"
msgstr ""
#. +> stable
#: kmymoney/views/kwelcomepage.cpp:213
#, kde-format
msgid "Transaction tags were added"
msgstr ""
#. +> stable
#: kmymoney/views/kwelcomepage.cpp:214
#, kde-format
msgid "Proper input methods support was added"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/views/kwelcomepage.cpp:215
#, kde-format
msgid "The KMyMoney Development Team"
msgstr ""
#. +> stable
#: kmymoney/views/kwelcomepage.cpp:216
#, kde-format
msgid "Added a frozen column to improve visualizing forecast details"
msgstr ""
#. +> stable
#: kmymoney/views/kwelcomepage.cpp:217
#, kde-format
msgid "Improved multiple records management actions (payees, transactions)"
msgstr ""
#. +> stable
#: kmymoney/views/kwelcomepage.cpp:218
#, kde-format
msgid "Better performance of the user interface"
msgstr ""
#. +> stable
#: kmymoney/views/kwelcomepage.cpp:219
#, kde-format
msgid "Homepage can show accounts online banking status"
msgstr ""
#. +> stable
#: kmymoney/views/kwelcomepage.cpp:221
#, kde-format
msgid "CSV importer was improved"
msgstr ""
#. +> stable
#: kmymoney/views/kwelcomepage.cpp:223
#, kde-format
msgid "OFX plugin now allows custom application version"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kwelcomepage.cpp:237
#, kde-format
msgid "* General changes"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kwelcomepage.cpp:238
#, kde-format
msgid "- Port to KDE frameworks and Qt5"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kwelcomepage.cpp:240
#, kde-format
msgid "* User Interface changes"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kwelcomepage.cpp:241
#, kde-format
msgid "- Show more tooltips why features are not available"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kwelcomepage.cpp:242
#, kde-format
msgid "- Improved compatibility with dark color schemes"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kwelcomepage.cpp:243
#, kde-format
msgid "- Fast switching of main views via Ctrl + number key"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kwelcomepage.cpp:244
#, kde-format
msgid "- Improved keyboard navigation"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kwelcomepage.cpp:245
#, kde-format
msgid "- View columns are user selectable"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kwelcomepage.cpp:246
#, kde-format
msgid "- Use QWebEngine in favor of KHTML when available"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kwelcomepage.cpp:248
#, kde-format
msgid "* Im-/Exporter"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kwelcomepage.cpp:249
#, kde-format
msgid "- Added support for Weboob"
msgstr ""
#. +> stable
#: kmymoney/views/kwelcomepage.cpp:209
#, kde-format
msgid "Added support for online SEPA transactions"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kwelcomepage.cpp:250
#, kde-format
msgid "- Improved CSV importer"
msgstr ""
#. +> stable
#: kmymoney/views/kwelcomepage.cpp:220
#, kde-format
msgid "Improved the icon theme"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kwelcomepage.cpp:251
#, kde-format
msgid "- Added CSV exporter"
msgstr ""
#. +> stable
#: kmymoney/views/kwelcomepage.cpp:222
#, kde-format
msgid "CSV exporter added"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kwelcomepage.cpp:252
#, kde-format
msgid "- Improved payee matching when importing transactions"
msgstr ""
#. +> stable
#: kmymoney/views/kwelcomepage.cpp:211
#, kde-format
msgid "Improved payee matching when importing transactions"
msgstr ""
#. +> stable
#: kmymoney/views/kwelcomepage.cpp:215
#, kde-format
msgid "Improved the transaction form"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kwelcomepage.cpp:254
#, kde-format
msgid "* Online services"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kwelcomepage.cpp:255
#, kde-format
msgid "- Updated list of application versions for OFX direct import"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kwelcomepage.cpp:256
#, kde-format
msgid "- Get rid of Yahoo as price source"
msgstr ""
#. +> trunk5 stable5
#: kmymoney/views/kwelcomepage.cpp:257
#, kde-format
msgid "- Supporting OFX client uid required by some banks"
msgid "In case you have multiple split entries to the same category and you like to keep them as a single split, press this button. The amount for identical categories will be added and stored in a single split for that category."
msgctxt "@title header of the account name column"
msgid "Name"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/widgets/kbudgetvalues.cpp:240
#, kde-format
msgid "You have entered budget values using a different base which would result in a monthly budget of <b>%1</b>. Should this value be used to fill the monthly budget?"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/widgets/kbudgetvalues.cpp:240
#: kmymoney/widgets/kbudgetvalues.cpp:259
#: kmymoney/widgets/kbudgetvalues.cpp:278
#, kde-format
msgctxt "Auto assignment (caption)"
msgid "Auto assignment"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/widgets/kbudgetvalues.cpp:259
#, kde-format
msgid "You have entered budget values using a different base which would result in a yearly budget of <b>%1</b>. Should this value be used to fill the monthly budget?"
msgstr ""
#. +> trunk5 stable5 stable
#: kmymoney/widgets/kbudgetvalues.cpp:278
#, kde-format
msgid "You have entered budget values using a different base which would result in an individual monthly budget of <b>%1</b>. Should this value be used to fill the monthly budgets?"
msgid "<p>Select this option to cause the report to be shown as a chart when you first open the report. Otherwise, it will come up as a text report.</p>"
"Reconciling your account ensures your records match those of your institution, and that there are no mistakes on either side. You should reconcile your account whenever you receive a statement from your institution.\n"
"\n"
"All relevant information necessary for this process is usually printed on your statement.\n"
"\n"
"On the next page you will verify that the ending balance matches that on your statement. If not, please modify it.\n"
"\n"
"The starting balance is the sum of your cleared and reconciled transactions."
"You have previously postponed the reconciliation of this account. If you have entered charges or interests the last time you started reconciling this account you can modify these in the ledger later on.\n"
"\n"
"It is important, that you continue with the same statement you used when you postponed the reconciliation.\n"
"\n"
"All information you have entered into this wizard will be shown and all transactions that you already cleared are marked with a 'C'."
msgid "This page summarizes the data you have entered. Press <b>Finish</b> to create the account, schedules, etc. or use <b>Back</b> to modify your entries."
msgid "Please make sure to enter the correct conversion for the selected opening date. If you requested an online quote it might be provided for a different date."
msgid "Enter the name of the account under which it is known within KMyMoney. Select the type for the new account. Use the <b>What's this?</b> feature to see more details about the various account types. Enter the date the account was opened and its currency."
"Use the checking account type to manage activities on your checking account e.g. payments, checks and cash card purchases.</p>"
"\n"
"\n"
"<p><b>Savings</b>\n"
"Use the savings account type to manage activities on your savings account.</p>"
"\n"
"\n"
"<p><b>Credit Card</b>\n"
"Use the credit card account type to manage activities on your credit card.</p>"
"\n"
"\n"
"<p><b>Cash</b>\n"
"\n"
"Use the cash account type to manage activities in your wallet.</p>"
"\n"
"\n"
"<p><b>Loan</b>\n"
"Use the loan account type to manage amortization loans (e.g. mortgages, car loan, money you lend, private loans etc.).</p>"
"\n"
"\n"
"<p><b>Investment</b>\n"
"Use the investment account to manage your stock, mutual fund and other investments.</p>"
"\n"
"\n"
"<p><b>Asset</b>\n"
"Use the asset account type to manage assets (e.g. your house, car or art collection).</p>"
"\n"
"\n"
"<p><b>Liability</b>\n"
"Use the liability account type to manage any type of liability except amortization loans. Use it for taxes you owe or money you borrowed from friends. For amortization loans like mortgages you should create a loan account.</p>"
"<p>The opening date would be the date of the last statement. In case you want to keep track of transactions prior to this date, enter the ending balance and statement date of a prior statement and add all following transactions into KMyMoney. KMyMoney will not allow you to enter or modify transactions prior to this date.</p>"
"\n"
"<p><i>Note</i>: If you do not know the exact amount of the opening balance, enter an estimate. You can change this value later before you reconcile this account for the first time.</p>"
"<p>The opening balance is the balance of the account when you start using it with KMyMoney. For new accounts this is usually 0 but for existing accounts this may well differ. Please consult the account statements to figure out this value. The opening balance is to be provided in the currency of the account as selected with the currency button.</p>"
"\n"
"<p><i>Note</i>: If you do not know the exact amount of the opening balance, enter an estimate. You can change this value later before you reconcile this account for the first time.</p>"
msgid "For foreign currencies an initial conversion rate needs to be provided. This should be the price of the foreign currency in the base currency on the opening date of the account."
"Does this investment account have a brokerage account?"
"<p>\n"
"\n"
"<b>Check</b> the mark if this investment account has an associated account for money that is not invested.<br>"
"\n"
"\n"
"<b>Uncheck</b> it if you do not use this account for active stock brokerage. You should also uncheck it if the account is not maintained by a bank or broker."
msgid "For credit card accounts you can create a monthly schedule which will automatically remind you about the payment. Please fill in the details about this payment here."
"<qt>Select which transactions should be recorded.\n"
"\n"
"<b>All payments</b> allows you to enter all payments made for this loan.\n"
"\n"
"The option to <b>start from the beginning of the current year</b> is meant for loans that have already been active for a longer period of time, and for which you do not want to enter all past transactions.\n"
msgid "You have selected to record only payments from the beginning of this year. Since prior transactions will not be recorded, you need to supply the balance of the loan on January 1st of this year."
msgid "Select the frequency with which the interest is compounded. If uncertain, select the same as the payment frequency. Consult your loan contract for details."
"If this account is managed by an institution please select the institution from the list. If the institution does not exist yet, please choose the <b>New Institution</b> button to create it. Otherwise, leave this field empty.\n"
"Enter the account number used by the institution to identify the account."
"You can enter the IBAN (International Bank Account Number) into this field if you know it. Usually, people at your institution can tell you the number or it is printed on your statements.\n"
"\n"
"See also http://en.wikipedia.org/wiki/International_Bank_Account_Number for more information.\n"
"\n"
"KMyMoney keeps this field only for documentation purposes and does not use it otherwise."
msgid "Now enter the details for your loan. You can leave one of the fields empty and KMyMoney will calculate it when you press the <b>Calculate</b> button. Before you can continue with the next page you also need to press <b>Calculate</b> so that KMyMoney can check the logical correctness of the values you have supplied."
msgid "Enter the amount of the loan in this field. If you want to calculate this field out of the other parameters, please leave it empty. If the field is marked as required (colored background) you have informed KMyMoney about the fact that there were already some payments towards the loan. In this case, please enter the ending balance of your last statement."
msgid "Please enter the term of this loan or enter 0 to calculate it. The term is the time that is required to fully repay the loan. This time might be different from the time your loan contract is signed for."
msgid "Pressing this button calculates a possibly missing parameter for your loan or verifies that the values entered match. If something is not correct you will receive information about it."
msgid "Now enter the information required for the periodic loan payments. If your regular payments contains any additional fees, click on the <b>Additional fees</b> button to enter them."
"If this loan is for an asset, such as a car or a house, you can create the asset account now. An asset account represents the total value of an asset. The money from this loan will be transferred into the asset account you create or select.\n"
"If this loan is a 'consumer loan' (money to use however you want), you can use a checking account instead."
"KMyMoney creates a schedule for this payment and reminds you whenever a payment must be made. Please select the account to/from which payments will be made and the category the interest will be assigned to."
"<p>\n"
"If you selected to record all payments this date has already been supplied. If you selected to record only this years payments, then the <b>First payment due date</b> is the date of the first payment made in this year."
msgid "The category the interest part of the payment will be assigned to. If you borrow money you usually have to pay interest, so this should be an expense category. If you lend the money, you receive the interest. In this case, select an income category here."
msgid "Select the account from which you make your periodical payments or where you receive regular payments in case you lend the money. In most cases, this is a checking account."
msgid "The first step in this process requires to select the type of investment. The following steps collect more details about the investment from you."
msgid "Select an online source and click <b>Finish</b> to store the investment data. If you do not want to use online updates, just leave the data as is."
"KMyMoney has calculated the loan as shown in the overview below. You can accept these values by selecting \"Next\" or change them by choosing \"Back\" to return to the input field for the information you want to change."
"Please enter the term of this loan or leave the field empty to calculate it. The term is the time that is required to fully repay the loan. This time might be different from the time your loan contract is signed for."
msgid "Please enter the date from which on the following changes will be effective. The date entered must be later than the opening date of this account (%1), but must not be in the future. The default will be today."
msgid "Note: Consult the loan contract for details of the first due date. Keep in mind, that the first due date usually differs from the date the contract was signed"
"Is the interest of this loan fixed over a period of time or is it adapted from time to time? If the interest rate changes during the amortization phase of the loan you should choose the option 'variable interest rate'."
msgid "Note: you will not be able to modify this account today, because the opening date \"%1\" is in the future. Please revisit this dialog when the time has come."
msgid "Your previous selection was \"%1\". If you select another option, KMyMoney will dismiss the changes you have just entered. Do you wish to proceed?"
msgid "The loan wizard is unable to calculate two different values for your loan at the same time. Please enter a value for the %1 on this page or backup to the page where the current value to be calculated is defined and fill in a value."
msgid "You selected, that payments have already been made towards this loan. This requires you to enter the loan amount exactly as found on your last statement."
msgid "You have entered mis-matching information. Please backup to the appropriate page and update your figures or leave one value empty to let KMyMoney calculate it for you"
"Welcome to the New Loan Account Wizard which will guide you through the creation of a new loan e.g. for your home, your car or any other loan that you pay or gain interest for.\n"
"\n"
"Please make sure that you have the relevant information handy. You usually get the information out of your contract and the last statement."
"KMyMoney either calculates the new interest rate or the amount for principal and interest. If you know the amount for principal and interest then enter it here.\n"
"\n"
"If KMyMoney should calculate this value for you, then leave the field blank."
"KMyMoney will create a schedule for this payment and reminds you whenever a payment must be made."
"<p>\n"
"If you selected to record all payments this date has already been supplied. If you selected to record only this years payments, then the <b>First payment due date</b> is the date of the first payment made in this year."
"KMyMoney has calculated the loan as shown below. If you want to accept these values use the \"Finish\" button to update your account, otherwise use the \"Back\" button to modify your settings."
"This page summarizes the data you entered. If you need to modify anything, please use the \"Back\" button to go to respective page. Otherwise use the \"Finish\" button to create the account."
msgid "A typical KMyMoney user maintains a checking account with some institution and uses it to receive money or pay bills. If this is not the case, please deselect the checkbox below and continue on the next page."
msgid "Enter the date from when on you plan to keep track of the transactions in that account. This is usually the date of the last statement. If uncertain, leave as is."
msgid "The fields below allow you to enter some information about your checking account. Once this wizard finishes, the account will be created for you within KMyMoney."
msgid "KMyMoney supports multiple currencies. Your reports will be based on a default currency which you can select here. The default for new accounts is also the currency you select here."
msgid "KMyMoney will store your financial data in a file on the disk. A standard filename within your user environment will be the default. This is just provided for convenience and you can choose any other location here."
msgid "This finishes the setup of your KMyMoney environment. You can now press the Finish button and start using KMyMoney to record your financial transactions."
"You have started KMyMoney for the first time on this computer. Before this program can help you to manage your finances, it needs to collect some data from you."
"<p>\n"
"\n"
"On the next few pages you will be guided through the steps necessary to setup the program. This will happen only once."
msgid "<p>KMyMoney can encrypt your datafile using GPG Encryption. GPG encryption is one of the most secure methods in the world for protecting data. All of your account numbers and other important financial information will be very secure.</p>"
msgid "If you would like to review or change any preference settings for KMyMoney after finishing this wizard, you can do so by checking this box. If not just click <b>Next</b>."
msgid "You can change the configuration options at any time using the configuration dialog. Just select the <b>Configure KMyMoney...</b> option in the <b>Settings</b> menu."
msgid "Select groups of accounts that correspond to the ways that you will use KMyMoney. Each group you select will cause several accounts and categories to be created. Select the groups that are relevant to you. You can always create additional accounts manually later."
msgid "KMyMoney supports multiple currencies, nevertheless one of them will be used as your base currency. The base currency is used as default for new accounts and reports. Please select the base currency from the following list."
msgctxt "These are the suffix strings of the days in the calendar view; please make sure that you keep all the 30 separators (the '-' character) when translating"
msgid "KMyMoney will store your financial data in a file on the disk. A standard filename within your KDE user environment will be the default. This is just provided for convenience and you can choose any other location here."
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">this list allows you to open bookmarked pages</p>"
"\n"
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-weight:600;\">Ctrl</span> to open in a new page</p>"
msgctxt "Action allowing the user to change his document password"
msgid "Change password..."
msgstr ""
#. +> trunk5
#: plugins/generic/skg_file/skgfileplugin.cpp:125
#: plugins/generic/skg_file/skgfileplugin.cpp:143
#, kde-format
msgctxt "Splash screen message"
msgid "Opening file %1..."
msgstr ""
#. +> trunk5
#: plugins/generic/skg_file/skgfileplugin.cpp:228
#, kde-format
msgctxt "Noun, a file as in a text file"
msgid "File"
msgstr ""
#. +> trunk5
#: plugins/generic/skg_file/skgfileplugin.cpp:238
#, kde-format
msgctxt "File Management, as in Save File, Save As..."
msgid "File management"
msgstr ""
#. +> trunk5
#: plugins/generic/skg_file/skgfileplugin.cpp:244
#, kde-format
msgctxt "Description of a tip"
msgid "<p>... the last opened file can be <a href=\"skg://tab_configure?page=File plugin\">open automatically</a> when the application is launched.</p>"
msgstr ""
#. +> trunk5
#: plugins/generic/skg_file/skgfileplugin.cpp:245
#, kde-format
msgctxt "Description of a tip"
msgid "<p>... you can secure your document with a <a href=\"skg://file_change_password\">password</a>.</p>"
msgstr ""
#. +> trunk5
#: plugins/generic/skg_file/skgfileplugin.cpp:270
#, kde-format
msgctxt "Successful message after creating a document"
msgid "Document successfully created."
msgstr ""
#. +> trunk5
#: plugins/generic/skg_file/skgfileplugin.cpp:272
#, kde-format
msgctxt "Error message: Could not create a document"
msgid "Document creation failed."
msgstr ""
#. +> trunk5
#: plugins/generic/skg_file/skgfileplugin.cpp:296
#, kde-format
msgctxt "Successfully saved a file"
msgid "File successfully saved."
msgstr ""
#. +> trunk5
#: plugins/generic/skg_file/skgfileplugin.cpp:298
#, kde-format
msgctxt "Error message: Could not save a file"
msgid "Cannot save file"
msgstr ""
#. +> trunk5
#: plugins/generic/skg_file/skgfileplugin.cpp:313
#, kde-format
msgctxt "Associated with the file extension : for example, .csv --> CSV document"
msgid "%1 document"
msgstr ""
#. +> trunk5
#: plugins/generic/skg_file/skgfileplugin.cpp:328
#, kde-format
msgctxt "Successfully saved a file"
msgid "File '%1' saved."
msgstr ""
#. +> trunk5
#: plugins/generic/skg_file/skgfileplugin.cpp:340
#, kde-format
msgctxt "Error message: Could not save a file"
msgid "Failed to save '%1'."
msgstr ""
#. +> trunk5
#: plugins/generic/skg_file/skgfileplugin.cpp:374
#, kde-format
msgctxt "Panel title"
msgid "Open file"
msgstr ""
#. +> trunk5
#: plugins/generic/skg_file/skgfileplugin.cpp:376
#, kde-format
msgctxt "File format for open dialog panel"
msgid "%1 document"
msgstr ""
#. +> trunk5
#: plugins/generic/skg_file/skgfileplugin.cpp:383
#, kde-format
msgctxt "Warning message"
msgid "Your document has been restored from its temporary file. You can decide to reopen the original document."
msgctxt "The user did not provide the correct password"
msgid "<b>Wrong password.</b>\n"
msgstr ""
#. +> trunk5
#: plugins/generic/skg_file/skgfileplugin.cpp:485
#, kde-format
msgctxt "Successfully opened a file"
msgid "File '%1' opened."
msgstr ""
#. +> trunk5
#: plugins/generic/skg_file/skgfileplugin.cpp:521
#, kde-format
msgctxt "Error message: Could not open a file"
msgid "Failed to open '%1'."
msgstr ""
#. +> trunk5
#: plugins/generic/skg_file/skgfileplugin.cpp:529
#, kde-format
msgctxt "Noun"
msgid "Try a recovery"
msgstr ""
#. +> trunk5
#: plugins/generic/skg_file/skgfileplugin.cpp:552
#, kde-format
msgctxt "Positive message"
msgid ""
"Your document has been recovered here: %1\n"
"Take care the recovery could be not perfect"
msgstr ""
#. +> trunk5
#: plugins/generic/skg_file/skgfileplugin.cpp:553
#, kde-format
msgctxt "Noun"
msgid "Open the recovered file"
msgstr ""
#. +> trunk5
#: plugins/generic/skg_file/skgfileplugin.cpp:572
#, kde-format
msgid "Take care, if you lose your <b>password</b> then it will be <u><b>impossible</b></u> to open your document. Warning, this action can not be undone excepted by changing the password again."
msgstr ""
#. +> trunk5
#: plugins/generic/skg_file/skgfileplugin.cpp:574
#, kde-format
msgctxt "Successfully changed the document password"
msgid "Changing password was canceled."
msgstr ""
#. +> trunk5
#: plugins/generic/skg_file/skgfileplugin.cpp:580
#, kde-format
msgctxt "Successfully changed the document password"
msgid "Password changed."
msgstr ""
#. +> trunk5
#: plugins/generic/skg_file/skgfileplugin.cpp:582
#, kde-format
msgctxt "Error message: Could not change the document password"
msgid "Failed to change password."
msgstr ""
#. +> trunk5
#: plugins/generic/skg_file/skgfileplugin.cpp:602
#, kde-format
msgctxt "Advice to the user that he should backup his document"
msgid "Backup your document"
msgstr ""
#. +> trunk5
#: plugins/generic/skg_file/skgfileplugin.cpp:603
#, kde-format
msgctxt "Explain the user that he should backup his document"
msgid "Do not forget to backup your document on another device."
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">The number of undoable actions to keep in the history. If you want to keep <span style=\" font-weight:600;\">all</span> actions in the history, set this to <span style=\" font-weight:600;\">-1</span>, but be warned that the file size will increase steeply.</p>"
msgid "Columns date and amount not found. Set import parameters in settings (Configure Skrooge... / Import/Export / CSV / Edit regular expressions...)."
msgctxt "Information on an account's status : Balance is the current amount of money on the account, Checked is the amount of money on your last bank's statement, To be Checked is the differences between these two values"
msgid "Today balance : %1 Balance : %2 Checked : %3 To be Checked : %4"
msgctxt "Information on an account's status : Balance is the current amount of money on the account, Checked is the amount of money on your last bank's statement, To be Checked is the differences between these two values"
"</style></head><body style=\" font-family:'Bitstream Vera Sans'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Amount of the operation.</p>"
"\n"
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">You can enter expressions here, such as <span style=\" font-style:italic;\">3+4*2</span>, skrooge will compute the result (<span style=\" font-style:italic;\">11</span>)</p>"
msgctxt "List of categories.It is not needed to translate each item. You can set the list you want. ';' must be used to separate categories. ' > ' must be used to separate categorie and sub caterogie (no limit of level)."
msgid "Alimony;Auto;Auto > Fuel;Auto > Insurance;Auto > Lease;Auto > Loan;Auto > Registration;Auto > Service;Bank Charges;Bank Charges > Interest Paid;Bank Charges > Service Charge;Bills;Bills > Electricity;Bills > Fuel Oil;Bills > Local Taxes;Bills > Mortgage;Bills > Natural Gas;Bills > Rent;Bills > TV;Bills > Telephone;Bills > Water & Sewage;Bonus;Business;Business > Auto;Business > Capital Goods;Business > Legal Expenses;Business > Office Rent;Business > Office Supplies;Business > Other;Business > Revenue;Business > Taxes;Business > Travel;Business > Utilities;Business > Wages & Salary;Car;Car > Fuel;Car > Insurance;Car > Lease;Car > Loan;Car > Registration;Car > Service;Cash Withdrawal;Charity;Charity > Donations;Child Care;Child Support;Clothing;Disability;Div Income;Div Income > Ord dividend;Div Income > Stock dividend;Education;Education > Board;Education > Books;Education > Fees;Education > Loans;Education > Tuition;Employment;Employment > Benefits;Employment > Foreign;Employment > Lump sums;Employment > Other employ;Employment > Salary & wages;Food;Food > Dining Out;Food > Groceries;Gardening;Gift Received;Gifts;Healthcare;Healthcare > Dental;Healthcare > Doctor;Healthcare > Hospital;Healthcare > Optician;Healthcare > Prescriptions;Holidays;Holidays > Accomodation;Holidays > Travel;Household;Household > Furnishings;Household > Repairs;Insurance;Insurance > Auto;Insurance > Disability;Insurance > Home and Contents;Insurance > Life;Insurance > Medical;Int Inc;Int Inc > Bank Interest;Int Inc > Gross;Int Inc > Net;Int Inc > Other savings;Invest. income;Invest. income > 1st option;Invest. income > Dividend;Invest. income > Foreign;Invest. income > Other savings;Invest. income > Other trusts;Invest. income > Other trusts#Capital;Invest. income > Other trusts#Dist. rec'd;Invest. income > Other trusts#Estate;Investment Income;Investment Income > Dividends;Investment Income > Interest;Investment Income > Long-Term Capital Gains;Investment Income > Short-Term Capital Gains;Investment Income > Tax-Exempt Interest;Job Expense;Job Expense > Non-Reimbursed;Job Expense > Reimbursed;Legal Fees;Leisure;Leisure > Books & Magazines;Leisure > Entertaining;Leisure > Films & Video Rentals;Leisure > Hobbies;Leisure > Sporting Events;Leisure > Sports Goods;Leisure > Tapes & CDs;Leisure > Theatre & Concerts etc;Leisure > Toys & Games;Loan;Loan > Loan Interest;Long-Term Capital gains;Mortgage;Mortgage > Interest;Mortgage > PMI;Mortgage > Principle;Motor;Motor > Fuel;Motor > Loan;Motor > Service;Other Expense;Other Expense > Unknown;Other Income;Other Income > Child Support;Other Income > Employee Share Option;Other Income > Gifts Received;Other Income > Loan Principal Received;Other Income > Lottery or Premium Bond Prizes;Other Income > Student loan;Other Income > Tax Refund;Other Income > Unemployment Benefit;Pension;Pension > Employer;Personal Care;Pet Care;Pet Care > Food;Pet Care > Supplies;Pet Care > Vet's Bills;Recreation;Retirement Accounts;Retirement Accounts > 401(k)403(b) Plan Contributions;Retirement Accounts > 529 Plan Contributions;Retirement Accounts > IRA Contributions;Retirement Income;Retirement Income > 401(k);Retirement Income > 401(k) > 403(b) Distributions;Retirement Income > IRA Distributions;Retirement Income > Pensions & Annuities;Retirement Income > State Pension Benefits;Short-Term Capital gains;Social Security Benefits;Taxes;Taxes > AMT;Taxes > Federal Tax;Taxes > Federal Taxes;Taxes > Local Tax;Taxes > Local Taxes;Taxes > Other Invest;Taxes > Other Tax;Taxes > Property Taxes;Taxes > Social Security;Taxes > State Tax;Taxes > State Taxes;Travel;Travel > Accomodations;Travel > Car Rental;Travel > Fares;Utilities;Utilities > Electricity;Utilities > Garbage & Recycling;Utilities > Gas;Utilities > Sewer;Utilities > Telephone;Utilities > Water;Wages & Salary;Wages & Salary > Benefits;Wages & Salary > Bonus;Wages & Salary > Commission;Wages & Salary > Employer Pension Contributions;Wages & Salary > Gross Pay;Wages & Salary > Net Pay;Wages & Salary > Overtime;Wages & Salary > Workman's Comp"
msgid "<p>... if you delete a <a href=\"skg://skrooge_categories_plugin\">category</a>, all operations affected by this category will be associated to its parent category.</p>"
msgid "<p>... skrooge is able to detect <a href=\"skg://tab_configure?page=Skrooge import and export plugin\">automatically</a> transfers after an import.</p>"
msgid "<p>... you can customize your CSV import with regular expressions defined in <a href=\"skg://tab_configure?page=Skrooge import and export plugin\">setting</a> panel.</p>"
msgid "<p>... you can export some accounts or operations just be selecting them before to launch the <a href=\"skg://export\">export_operation</a>.</p>"
msgid "After importing operations, you should review them, make corrections on, for instance, category, payee. Once done, you should mark the imported operation as validated, so that you know the operation has been fully processed."
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"> Must be a string containing following key words separated by <span style=\" font-weight:600;\">|</span>:</p>"
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:9pt;\"> or anything else to import the column as a property.</span></p>"
msgid "<p>... you have to indicate the sign of an <a href=\"skg://skrooge_operation_plugin\">operation</a> only if you want to force it, else it will be determined automatically with the <a href=\"skg://skrooge_category_plugin\">category</a>.</p>"
msgid "Your account '%1' contains more than one operation with number %2.The operation number should be unique (check number, transaction reference...)"
msgid "Do not forget to reconciliate your accounts. By doing so, you acknowledge that your bank has indeed processed these operations on your account. This is how you enforce compliance with your bank's statements. See online help for more details"
msgid "When a transfer is created and when only one part of this transfer is removed, the second part is in a group of only one operation. This makes no sense."
"</style></head><body style=\" font-family:'Bitstream Vera Sans'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">A <span style=\" font-style:italic;\">Tracker</span> is a way to group some operations together. For example, you may use it to follow refunds.</p>"
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">You will find more information on this in the documentation in the chapter \"Trackers\".</p>"
msgid "<p>... <a href=\"skg://skrooge_unit_plugin\">units</a> can be downloaded <a href=\"skg://tab_configure?page=Skrooge Unit Plugin\">automatically</a> when a document is opened.</p>"
msgid "To avoid misunderstanding and conflicts between units at conversion time, you should define a primary currency. It is the currency against which all other will be converted"
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-family:'DejaVu Sans'; font-size:10pt;\">You can add \" /\" if you are not able to download the expected quote but you are able to download the inverse.</span></p>"
"\n"
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-family:'DejaVu Sans'; font-size:10pt; text-decoration: underline;\">Example:</span><span style=\" font-family:'DejaVu Sans'; font-size:10pt;\"> EURUSD=X is the symbol to download EURO in USD.</span></p>"
"\n"
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-family:'DejaVu Sans'; font-size:10pt;\">If you want USD in EURO, you have to create a unit USD with \"EURUSD=X /\" as the Internet code.</span></p>"
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-family:'DejaVu Sans'; font-size:10pt;\">This field can also be set with a yearly rate. The values are computed by clicking on download.<br />"
"Example:</span></p>"
"\n"
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-family:'DejaVu Sans'; font-size:10pt;\">=-25 means -25% per year.</span></p>"
"<p>Searching is case-insensitive. So table, Table, and TABLE are all the same.<br/>"
"If you just put a word or series of words in the search box, the application will filter the table to keep all lines having these words (logical operator AND). <br/>"
"If you want to add (logical operator OR) some lines, you must prefix your word by '+'.<br/>"
"If you want to remove (logical operator NOT) some lines, you must prefix your word by '-'.<br/>"
"If you want to search only on some columns, you must prefix your word by the beginning of column name like: col1:word.<br/>"
"If you want to search only on one column, you must prefix your word by the column name and a dot like: col1.:word.<br/>"
"If you want to use the character ':' in value, you must specify the column name like this: col1:value:rest.<br/>"
"If you want to search for a phrase or something that contains spaces, you must put it in quotes, like: 'yes, this is a phrase'.</p>"
"<p>You can also use operators '<', '>', '<=', '>=', '=' and '#' (for regular expression).</p>"
msgid "Reference unit of a unit cannot be itself."
msgstr ""
#. +> trunk5
#: skgbankmodeler/skgunitobject.cpp:1932
#, kde-format
msgctxt "Progression step"
msgid "Simplify unit"
msgstr ""
#. +> trunk5
#: skgbankmodeler/skgunitobject.cpp:1935
#, kde-format
msgctxt "Progression step"
msgid "Analyze unit"
msgstr ""
#. +> trunk5
#: skgbankmodeler/skgunitobject.cpp:1974
#, kde-format
msgctxt "Progression step"
msgid "Remove useless values"
msgstr ""
#. +> trunk5
#: skgbankmodeler/skgunitobject.cpp:2117
#, kde-format
msgctxt "Error message"
msgid "Invalid ratio. Ratio must be greater than 0."
msgstr ""
#. +> trunk5
#: skgbankmodeler/skgunitobject.cpp:2161
#, kde-format
msgctxt "Description test for a text file used to define a source of download"
msgid "The URL or the SCRIPT of the source. %1 will be replaced by the internet code of the unit"
msgstr ""
#. +> trunk5
#: skgbankmodeler/skgunitobject.cpp:2163
#, kde-format
msgctxt "Description test for a text file used to define a source of download"
msgid "%1 will be replaced by the current day in format yyyy-MM-dd"
msgstr ""
#. +> trunk5
#: skgbankmodeler/skgunitobject.cpp:2165
#, kde-format
msgctxt "Description test for a text file used to define a source of download"
msgid "%1 will be replaced by the previous date in format yyyy-MM-dd"
msgstr ""
#. +> trunk5
#: skgbankmodeler/skgunitobject.cpp:2172
#, kde-format
msgctxt "Description test for a text file used to define a source of download"
msgid "The mode (HTML or CSV or CSVR). In HTML mode, only one value will be extracted from downloaded page. In CSV mode, a value per line will be extracted. CSVR means CSV in reverse mode."
msgstr ""
#. +> trunk5
#: skgbankmodeler/skgunitobject.cpp:2176
#, kde-format
msgctxt "Description test for a text file used to define a source of download"
msgid "The regular expression for the price (see %1)"
msgstr ""
#. +> trunk5
#: skgbankmodeler/skgunitobject.cpp:2180
#, kde-format
msgctxt "Description test for a text file used to define a source of download"
msgid "The regular expression for the date (see %1)"
msgstr ""
#. +> trunk5
#: skgbankmodeler/skgunitobject.cpp:2184
#, kde-format
msgctxt "Description test for a text file used to define a source of download"
msgid "The format of the date (see %1) or \"UNIX\" for unix time"
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">this list allows you to open new pages</p>"
"\n"
"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-weight:600;\">Ctrl</span> to open in a new page</p>"
"This document is protected by a password but the database is still in SQLite mode.\n"
"Do you know that the SQLCipher mode is more secured because even the temporary file is encrypted?"
msgstr ""
#. +> trunk5
#: skgbasemodeler/skgdocument.cpp:1499
#, kde-format
msgctxt "Information message"
msgid "A security hole has been detected and corrected on this version of the application. We strongly encourage you to change your password."
msgstr ""
#. +> trunk5
#: skgbasemodeler/skgdocument.cpp:1505
#, kde-format
msgctxt "Popup message"
msgid "The migration failed but the document has been loaded without error because debug mode is activated"
msgstr ""
#. +> trunk5
#: skgbasemodeler/skgdocument.cpp:1509
#, kde-format
msgctxt "The document has been upgraded to the latest Skrooge version format"
msgid "The document has been migrated"
msgstr ""
#. +> trunk5
#: skgbasemodeler/skgdocument.cpp:1535
#, kde-format
msgctxt "Error message"
msgid "This application can not run correctly because the %3 version of the system (%1) is not aligned with the %4 version embedded in Qt (%2). You should rebuild Qt with the option -system-sqlite."
msgstr ""
#. +> trunk5
#: skgbasemodeler/skgdocument.cpp:1581
#, kde-format
msgctxt "Error message: Can not save a file if it has no name yet"
msgid "Save not authorized because the file name is not yet defined"
msgstr ""
#. +> trunk5
#: skgbasemodeler/skgdocument.cpp:1599
#, kde-format
msgctxt "Cannot save the file while the application is still performing an SQL transaction"
msgid "Save is forbidden if a transaction is still opened"
msgstr ""
#. +> trunk5
#: skgbasemodeler/skgdocument.cpp:1619
#, kde-format
msgctxt "There is already a file with the same name"
msgid "File '%1' already exist"
msgstr ""
#. +> trunk5
#: skgbasemodeler/skgdocument.cpp:1633
#, kde-format
msgctxt "Error message: Could not create a backup file"
msgid "The application name is inspired by Charles Dicken's tale <i>A Christmas Carol</i>, where the main character, Ebenezer Scrooge, a grumpy old narrow man, gets visited by three ghosts who change the way he sees the world, in a good way."
msgid "Root privileges are required to create a symlink. Do you want to continue?"
msgstr ""
#. +> trunk5
#: core/job.cpp:332
#, kde-format
msgid "Transfer data"
msgstr ""
#. +> trunk5
#: core/job.cpp:333
#, kde-format
msgid "Root privileges are required to complete transferring data. Do you want to continue?"
msgstr ""
#. +> trunk5
#: core/job.cpp:350
#, kde-format
msgid "Continue"
msgstr ""
#. +> trunk5
#: core/job.cpp:350
#, kde-format
msgid "Cancel"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:39
#, kde-format
msgid "Could not read %1."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:42
#, kde-format
msgid "Could not write to %1."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:45
#, kde-format
msgid "Could not start process %1."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:48
#, kde-format
msgid ""
"Internal Error\n"
"Please send a full bug report at http://bugs.kde.org\n"
"%1"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:51
#, kde-format
msgid "Malformed URL %1."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:54
#, kde-format
msgid "The protocol %1 is not supported."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:57
#, kde-format
msgid "The protocol %1 is only a filter protocol."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:64
#, kde-format
msgid "%1 is a folder, but a file was expected."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:67
#, kde-format
msgid "%1 is a file, but a folder was expected."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:70
#, kde-format
msgid "The file or folder %1 does not exist."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:73
#, kde-format
msgid "A file named %1 already exists."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:76
#, kde-format
msgid "A folder named %1 already exists."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:79
#, kde-format
msgid "No hostname specified."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:79
#, kde-format
msgid "Unknown host %1"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:82
#, kde-format
msgid "Access denied to %1."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:85
#, kde-format
msgid ""
"Access denied.\n"
"Could not write to %1."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:88
#, kde-format
msgid "Could not enter folder %1."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:91
#, kde-format
msgid "The protocol %1 does not implement a folder service."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:94
#, kde-format
msgid "Found a cyclic link in %1."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:100
#, kde-format
msgid "Found a cyclic link while copying %1."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:103
#, kde-format
msgid "Could not create socket for accessing %1."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:106
#, kde-format
msgid "Could not connect to host %1."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:109
#, kde-format
msgid "Connection to host %1 is broken."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:112
#, kde-format
msgid "The protocol %1 is not a filter protocol."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:115
#, kde-format
msgid ""
"Could not mount device.\n"
"The reported error was:\n"
"%1"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:118
#, kde-format
msgid ""
"Could not unmount device.\n"
"The reported error was:\n"
"%1"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:121
#, kde-format
msgid "Could not read file %1."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:124
#, kde-format
msgid "Could not write to file %1."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:127
#, kde-format
msgid "Could not bind %1."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:130
#, kde-format
msgid "Could not listen %1."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:133
#, kde-format
msgid "Could not accept %1."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:139
#, kde-format
msgid "Could not access %1."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:142
#, kde-format
msgid "Could not terminate listing %1."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:145
#, kde-format
msgid "Could not make folder %1."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:148
#, kde-format
msgid "Could not remove folder %1."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:151
#, kde-format
msgid "Could not resume file %1."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:154
#, kde-format
msgid "Could not rename file %1."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:157
#, kde-format
msgid "Could not change permissions for %1."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:160
#, kde-format
msgid "Could not change ownership for %1."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:163
#, kde-format
msgid "Could not delete file %1."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:166
#, kde-format
msgid "The process for the %1 protocol died unexpectedly."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:169
#, kde-format
msgid ""
"Error. Out of memory.\n"
"%1"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:172
#, kde-format
msgid ""
"Unknown proxy host\n"
"%1"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:175
#, kde-format
msgid "Authorization failed, %1 authentication not supported"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:178
#, kde-format
msgid ""
"User canceled action\n"
"%1"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:181
#, kde-format
msgid ""
"Internal error in server\n"
"%1"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:184
#, kde-format
msgid ""
"Timeout on server\n"
"%1"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:187
#, kde-format
msgid ""
"Unknown error\n"
"%1"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:190
#, kde-format
msgid ""
"Unknown interrupt\n"
"%1"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:201
#, kde-format
msgid ""
"Could not delete original file %1.\n"
"Please check permissions."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:204
#, kde-format
msgid ""
"Could not delete partial file %1.\n"
"Please check permissions."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:207
#, kde-format
msgid ""
"Could not rename original file %1.\n"
"Please check permissions."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:210
#, kde-format
msgid ""
"Could not rename partial file %1.\n"
"Please check permissions."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:213
#, kde-format
msgid ""
"Could not create symlink %1.\n"
"Please check permissions."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:219
#, kde-format
msgid ""
"Could not write file %1.\n"
"Disk full."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:222
#, kde-format
msgid ""
"The source and destination are the same file.\n"
"%1"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:228
#, kde-format
msgid "%1 is required by the server, but is not available."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:231
#, kde-format
msgid "Access to restricted port in POST denied."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:234
#, kde-format
msgid "The required content size information was not provided for a POST operation."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:237
#, kde-format
msgid "A file or folder cannot be dropped onto itself"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:240
#, kde-format
msgid "A folder cannot be moved into itself"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:243
#, kde-format
msgid "Communication with the local password server failed"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:246
#, kde-format
msgid "Unable to create io-slave. %1"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:249
#, kde-format
msgid ""
"Unknown error code %1\n"
"%2\n"
"Please send a full bug report at http://bugs.kde.org."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:274
#, kde-format
msgctxt "@info url"
msgid "(unknown)"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:281
#, kde-format
msgctxt "@info %1 error name, %2 description"
msgid ""
"<qt>"
"<p><b>%1</b></p>"
"<p>%2</p>"
"</qt>"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:285
#, kde-format
msgid "<b>Technical reason</b>: "
msgstr ""
#. +> trunk5
#: core/job_error.cpp:287
#, kde-format
msgid "<b>Details of the request</b>:"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:288
#, kde-format
msgid "<li>URL: %1</li>"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:290
#, kde-format
msgid "<li>Protocol: %1</li>"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:292
#, kde-format
msgid "<li>Date and time: %1</li>"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:293
#, kde-format
msgid "<li>Additional information: %1</li>"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:296
#, kde-format
msgid "<b>Possible causes</b>:"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:301
#, kde-format
msgid "<b>Possible solutions</b>:"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:335
#, kde-format
msgctxt "@info protocol"
msgid "(unknown)"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:344
#, kde-format
msgid "Contact your appropriate computer support system, whether the system administrator, or technical support group for further assistance."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:347
#, kde-format
msgid "Contact the administrator of the server for further assistance."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:350
#, kde-format
msgid "Check your access permissions on this resource."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:351
#, kde-format
msgid "Your access permissions may be inadequate to perform the requested operation on this resource."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:353
#, kde-format
msgid "The file may be in use (and thus locked) by another user or application."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:355
#, kde-format
msgid "Check to make sure that no other application or user is using the file or has locked the file."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:357
#, kde-format
msgid "Although unlikely, a hardware error may have occurred."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:359
#, kde-format
msgid "You may have encountered a bug in the program."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:360
#, kde-format
msgid "This is most likely to be caused by a bug in the program. Please consider submitting a full bug report as detailed below."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:362
#, kde-format
msgid "Update your software to the latest version. Your distribution should provide tools to update your software."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:364
#, kde-format
msgid "When all else fails, please consider helping the KDE team or the third party maintainer of this software by submitting a high quality bug report. If the software is provided by a third party, please contact them directly. Otherwise, first look to see if the same bug has been submitted by someone else by searching at the <a href=\"http://bugs.kde.org/\">KDE bug reporting website</a>. If not, take note of the details given above, and include them in your bug report, along with as many other details as you think might help."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:372
#, kde-format
msgid "There may have been a problem with your network connection."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:375
#, kde-format
msgid "There may have been a problem with your network configuration. If you have been accessing the Internet with no problems recently, this is unlikely."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:378
#, kde-format
msgid "There may have been a problem at some point along the network path between the server and this computer."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:380
#, kde-format
msgid "Try again, either now or at a later time."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:381
#, kde-format
msgid "A protocol error or incompatibility may have occurred."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:382
#, kde-format
msgid "Ensure that the resource exists, and try again."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:383
#, kde-format
msgid "The specified resource may not exist."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:384
#, kde-format
msgid "You may have incorrectly typed the location."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:385
#, kde-format
msgid "Double-check that you have entered the correct location and try again."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:387
#, kde-format
msgid "Check your network connection status."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:391
#, kde-format
msgid "Cannot Open Resource For Reading"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:392
#, kde-format
msgid "This means that the contents of the requested file or folder <strong>%1</strong> could not be retrieved, as read access could not be obtained."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:395
#, kde-format
msgid "You may not have permissions to read the file or open the folder."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:401
#, kde-format
msgid "Cannot Open Resource For Writing"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:402
#, kde-format
msgid "This means that the file, <strong>%1</strong>, could not be written to as requested, because access with permission to write could not be obtained."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:410
#, kde-format
msgid "Cannot Launch Process required by the %1 Protocol"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:411
#, kde-format
msgid "Unable to Launch Process"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:412
#, kde-format
msgid "The program on your computer which provides access to the <strong>%1</strong> protocol could not be found or started. This is usually due to technical reasons."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:415
#, kde-format
msgid "The program which provides compatibility with this protocol may not have been updated with your last update of KDE. This can cause the program to be incompatible with the current version and thus not start."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:423
#, kde-format
msgid "Internal Error"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:424
#, kde-format
msgid "The program on your computer which provides access to the <strong>%1</strong> protocol has reported an internal error."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:432
#, kde-format
msgid "Improperly Formatted URL"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:433
#, kde-format
msgid ""
"The <strong>U</strong>niform <strong>R</strong>esource <strong>L</strong>ocator (URL) that you entered was not properly formatted. The format of a URL is generally as follows:"
msgid "The protocol <strong>%1</strong> is not supported by the KDE programs currently installed on this computer."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:446
#, kde-format
msgid "The requested protocol may not be supported."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:447
#, kde-format
msgid "The versions of the %1 protocol supported by this computer and the server may be incompatible."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:449
#, kde-format
msgid "You may perform a search on the Internet for a KDE program (called a kioslave or ioslave) which supports this protocol. Places to search include <a href=\"http://kde-apps.org/\">http://kde-apps.org/</a> and <a href=\"http://freshmeat.net/\">http://freshmeat.net/</a>."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:458
#, kde-format
msgid "URL Does Not Refer to a Resource."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:459
#, kde-format
msgid "Protocol is a Filter Protocol"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:460
#, kde-format
msgid "The <strong>U</strong>niform <strong>R</strong>esource <strong>L</strong>ocator (URL) that you entered did not refer to a specific resource."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:463
#, kde-format
msgid "KDE is able to communicate through a protocol within a protocol; the protocol specified is only for use in such situations, however this is not one of these situations. This is a rare event, and is likely to indicate a programming error."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:471
#, kde-format
msgid "Unsupported Action: %1"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:472
#, kde-format
msgid "The requested action is not supported by the KDE program which is implementing the <strong>%1</strong> protocol."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:475
#, kde-format
msgid "This error is very much dependent on the KDE program. The additional information should give you more information than is available to the KDE input/output architecture."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:478
#, kde-format
msgid "Attempt to find another way to accomplish the same outcome."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:483
#, kde-format
msgid "File Expected"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:484
#, kde-format
msgid "The request expected a file, however the folder <strong>%1</strong> was found instead."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:486
#, kde-format
msgid "This may be an error on the server side."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:491
#, kde-format
msgid "Folder Expected"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:492
#, kde-format
msgid "The request expected a folder, however the file <strong>%1</strong> was found instead."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:499
#, kde-format
msgid "File or Folder Does Not Exist"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:500
#, kde-format
msgid "The specified file or folder <strong>%1</strong> does not exist."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:508
#, kde-format
msgid "The requested file could not be created because a file with the same name already exists."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:510
#, kde-format
msgid "Try moving the current file out of the way first, and then try again."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:512
#, kde-format
msgid "Delete the current file and try again."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:513
#, kde-format
msgid "Choose an alternate filename for the new file."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:518
#, kde-format
msgid "The requested folder could not be created because a folder with the same name already exists."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:520
#, kde-format
msgid "Try moving the current folder out of the way first, and then try again."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:522
#, kde-format
msgid "Delete the current folder and try again."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:523
#, kde-format
msgid "Choose an alternate name for the new folder."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:527
#, kde-format
msgid "Unknown Host"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:528
#, kde-format
msgid "An unknown host error indicates that the server with the requested name, <strong>%1</strong>, could not be located on the Internet."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:531
#, kde-format
msgid "The name that you typed, %1, may not exist: it may be incorrectly typed."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:538
#, kde-format
msgid "Access Denied"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:539
#, kde-format
msgid "Access was denied to the specified resource, <strong>%1</strong>."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:541 core/job_error.cpp:767
#, kde-format
msgid "You may have supplied incorrect authentication details or none at all."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:543 core/job_error.cpp:769
#, kde-format
msgid "Your account may not have permission to access the specified resource."
msgid "Retry the request and ensure your authentication details are entered correctly."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:553
#, kde-format
msgid "Write Access Denied"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:554
#, kde-format
msgid "This means that an attempt to write to the file <strong>%1</strong> was rejected."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:561
#, kde-format
msgid "Unable to Enter Folder"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:562
#, kde-format
msgid "This means that an attempt to enter (in other words, to open) the requested folder <strong>%1</strong> was rejected."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:570
#, kde-format
msgid "Folder Listing Unavailable"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:571
#, kde-format
msgid "Protocol %1 is not a Filesystem"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:572
#, kde-format
msgid "This means that a request was made which requires determining the contents of the folder, and the KDE program supporting this protocol is unable to do so."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:580
#, kde-format
msgid "Cyclic Link Detected"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:581
#, kde-format
msgid "UNIX environments are commonly able to link a file or folder to a separate name and/or location. KDE detected a link or series of links that results in an infinite loop - i.e. the file was (perhaps in a roundabout way) linked to itself."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:585 core/job_error.cpp:607
#, kde-format
msgid "Delete one part of the loop in order that it does not cause an infinite loop, and try again."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:594
#, kde-format
msgid "Request Aborted By User"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:595 core/job_error.cpp:910
#, kde-format
msgid "The request was not completed because it was aborted."
msgid "UNIX environments are commonly able to link a file or folder to a separate name and/or location. During the requested copy operation, KDE detected a link or series of links that results in an infinite loop - i.e. the file was (perhaps in a roundabout way) linked to itself."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:612
#, kde-format
msgid "Could Not Create Network Connection"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:613
#, kde-format
msgid "Could Not Create Socket"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:614
#, kde-format
msgid "This is a fairly technical error in which a required device for network communications (a socket) could not be created."
msgid "The network connection may be incorrectly configured, or the network interface may not be enabled."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:622
#, kde-format
msgid "Connection to Server Refused"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:623
#, kde-format
msgid "The server <strong>%1</strong> refused to allow this computer to make a connection."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:625
#, kde-format
msgid "The server, while currently connected to the Internet, may not be configured to allow requests."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:627
#, kde-format
msgid "The server, while currently connected to the Internet, may not be running the requested service (%1)."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:629
#, kde-format
msgid "A network firewall (a device which restricts Internet requests), either protecting your network or the network of the server, may have intervened, preventing this request."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:636
#, kde-format
msgid "Connection to Server Closed Unexpectedly"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:637
#, kde-format
msgid "Although a connection was established to <strong>%1</strong>, the connection was closed at an unexpected point in the communication."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:640
#, kde-format
msgid "A protocol error may have occurred, causing the server to close the connection as a response to the error."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:646
#, kde-format
msgid "URL Resource Invalid"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:647
#, kde-format
msgid "Protocol %1 is not a Filter Protocol"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:648
#, kde-format
msgid "The <strong>U</strong>niform <strong>R</strong>esource <strong>L</strong>ocator (URL) that you entered did not refer to a valid mechanism of accessing the specific resource, <strong>%1%2</strong>."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:653
#, kde-format
msgid "KDE is able to communicate through a protocol within a protocol. This request specified a protocol be used as such, however this protocol is not capable of such an action. This is a rare event, and is likely to indicate a programming error."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:661
#, kde-format
msgid "Unable to Initialize Input/Output Device"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:662
#, kde-format
msgid "Could Not Mount Device"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:663
#, kde-format
msgid "The requested device could not be initialized (\"mounted\"). The reported error was: <strong>%1</strong>"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:666
#, kde-format
msgid "The device may not be ready, for example there may be no media in a removable media device (i.e. no CD-ROM in a CD drive), or in the case of a peripheral/portable device, the device may not be correctly connected."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:670
#, kde-format
msgid "You may not have permissions to initialize (\"mount\") the device. On UNIX systems, often system administrator privileges are required to initialize a device."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:674
#, kde-format
msgid "Check that the device is ready; removable drives must contain media, and portable devices must be connected and powered on.; and try again."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:680
#, kde-format
msgid "Unable to Uninitialize Input/Output Device"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:681
#, kde-format
msgid "Could Not Unmount Device"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:682
#, kde-format
msgid "The requested device could not be uninitialized (\"unmounted\"). The reported error was: <strong>%1</strong>"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:685
#, kde-format
msgid "The device may be busy, that is, still in use by another application or user. Even such things as having an open browser window on a location on this device may cause the device to remain in use."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:689
#, kde-format
msgid "You may not have permissions to uninitialize (\"unmount\") the device. On UNIX systems, system administrator privileges are often required to uninitialize a device."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:693
#, kde-format
msgid "Check that no applications are accessing the device, and try again."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:698
#, kde-format
msgid "Cannot Read From Resource"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:699
#, kde-format
msgid "This means that although the resource, <strong>%1</strong>, was able to be opened, an error occurred while reading the contents of the resource."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:702
#, kde-format
msgid "You may not have permissions to read from the resource."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:715
#, kde-format
msgid "Cannot Write to Resource"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:716
#, kde-format
msgid "This means that although the resource, <strong>%1</strong>, was able to be opened, an error occurred while writing to the resource."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:719
#, kde-format
msgid "You may not have permissions to write to the resource."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:732 core/job_error.cpp:743
#, kde-format
msgid "Could Not Listen for Network Connections"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:733
#, kde-format
msgid "Could Not Bind"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:734 core/job_error.cpp:745
#, kde-format
msgid "This is a fairly technical error in which a required device for network communications (a socket) could not be established to listen for incoming network connections."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:744
#, kde-format
msgid "Could Not Listen"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:754
#, kde-format
msgid "Could Not Accept Network Connection"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:755
#, kde-format
msgid "This is a fairly technical error in which an error occurred while attempting to accept an incoming network connection."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:759
#, kde-format
msgid "You may not have permissions to accept the connection."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:764
#, kde-format
msgid "Could Not Login: %1"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:765
#, kde-format
msgid "An attempt to login to perform the requested operation was unsuccessful."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:776
#, kde-format
msgid "Could Not Determine Resource Status"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:777
#, kde-format
msgid "Could Not Stat Resource"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:778
#, kde-format
msgid "An attempt to determine information about the status of the resource <strong>%1</strong>, such as the resource name, type, size, etc., was unsuccessful."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:781
#, kde-format
msgid "The specified resource may not have existed or may not be accessible."
msgstr ""
#. i18n( "Could not terminate listing %1" ).arg( errorText );
#. +> trunk5
#: core/job_error.cpp:789
#, kde-format
msgid "Could Not Cancel Listing"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:790
#, kde-format
msgid "FIXME: Document this"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:794
#, kde-format
msgid "Could Not Create Folder"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:795
#, kde-format
msgid "An attempt to create the requested folder failed."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:796
#, kde-format
msgid "The location where the folder was to be created may not exist."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:805
#, kde-format
msgid "Could Not Remove Folder"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:806
#, kde-format
msgid "An attempt to remove the specified folder, <strong>%1</strong>, failed."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:808
#, kde-format
msgid "The specified folder may not exist."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:809
#, kde-format
msgid "The specified folder may not be empty."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:814
#, kde-format
msgid "Ensure that the folder exists and is empty, and try again."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:819
#, kde-format
msgid "Could Not Resume File Transfer"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:820
#, kde-format
msgid "The specified request asked that the transfer of file <strong>%1</strong> be resumed at a certain point of the transfer. This was not possible."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:823
#, kde-format
msgid "The protocol, or the server, may not support file resuming."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:825
#, kde-format
msgid "Retry the request without attempting to resume transfer."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:830
#, kde-format
msgid "Could Not Rename Resource"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:831
#, kde-format
msgid "An attempt to rename the specified resource <strong>%1</strong> failed."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:841
#, kde-format
msgid "Could Not Alter Permissions of Resource"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:842
#, kde-format
msgid "An attempt to alter the permissions on the specified resource <strong>%1</strong> failed."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:849
#, kde-format
msgid "Could Not Change Ownership of Resource"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:850
#, kde-format
msgid "An attempt to change the ownership of the specified resource <strong>%1</strong> failed."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:857
#, kde-format
msgid "Could Not Delete Resource"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:858
#, kde-format
msgid "An attempt to delete the specified resource <strong>%1</strong> failed."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:865
#, kde-format
msgid "Unexpected Program Termination"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:866
#, kde-format
msgid "The program on your computer which provides access to the <strong>%1</strong> protocol has unexpectedly terminated."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:874
#, kde-format
msgid "Out of Memory"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:875
#, kde-format
msgid "The program on your computer which provides access to the <strong>%1</strong> protocol could not obtain the memory required to continue."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:883
#, kde-format
msgid "Unknown Proxy Host"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:884
#, kde-format
msgid "While retrieving information about the specified proxy host, <strong>%1</strong>, an Unknown Host error was encountered. An unknown host error indicates that the requested name could not be located on the Internet."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:888
#, kde-format
msgid "There may have been a problem with your network configuration, specifically your proxy's hostname. If you have been accessing the Internet with no problems recently, this is unlikely."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:892
#, kde-format
msgid "Double-check your proxy settings and try again."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:897
#, kde-format
msgid "Authentication Failed: Method %1 Not Supported"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:899
#, kde-format
msgid "Although you may have supplied the correct authentication details, the authentication failed because the method that the server is using is not supported by the KDE program implementing the protocol %1."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:903
#, kde-format
msgid "Please file a bug at <a href=\"http://bugs.kde.org/\">http://bugs.kde.org/</a> to inform the KDE team of the unsupported authentication method."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:909
#, kde-format
msgid "Request Aborted"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:916
#, kde-format
msgid "Internal Error in Server"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:917
#, kde-format
msgid "The program on the server which provides access to the <strong>%1</strong> protocol has reported an internal error: %2."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:920
#, kde-format
msgid "This is most likely to be caused by a bug in the server program. Please consider submitting a full bug report as detailed below."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:923
#, kde-format
msgid "Contact the administrator of the server to advise them of the problem."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:925
#, kde-format
msgid "If you know who the authors of the server software are, submit the bug report directly to them."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:930
#, kde-format
msgid "Timeout Error"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:931
#, kde-format
msgid ""
"Although contact was made with the server, a response was not received within the amount of time allocated for the request as follows:"
"<ul>"
"<li>Timeout for establishing a connection: %1 seconds</li>"
"<li>Timeout for receiving a response: %2 seconds</li>"
"<li>Timeout for accessing proxy servers: %3 seconds</li>"
"</ul>"
"Please note that you can alter these timeout settings in the KDE System Settings, by selecting Network Settings -> Connection Preferences."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:942
#, kde-format
msgid "The server was too busy responding to other requests to respond."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:948 core/slavebase.cpp:1442
#, kde-format
msgid "Unknown Error"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:949
#, kde-format
msgid "The program on your computer which provides access to the <strong>%1</strong> protocol has reported an unknown error: %2."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:957
#, kde-format
msgid "Unknown Interruption"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:958
#, kde-format
msgid "The program on your computer which provides access to the <strong>%1</strong> protocol has reported an interruption of an unknown type: %2."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:966
#, kde-format
msgid "Could Not Delete Original File"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:967
#, kde-format
msgid "The requested operation required the deleting of the original file, most likely at the end of a file move operation. The original file <strong>%1</strong> could not be deleted."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:976
#, kde-format
msgid "Could Not Delete Temporary File"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:977
#, kde-format
msgid "The requested operation required the creation of a temporary file in which to save the new file while being downloaded. This temporary file <strong>%1</strong> could not be deleted."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:986
#, kde-format
msgid "Could Not Rename Original File"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:987
#, kde-format
msgid "The requested operation required the renaming of the original file <strong>%1</strong>, however it could not be renamed."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:995
#, kde-format
msgid "Could Not Rename Temporary File"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:996
#, kde-format
msgid "The requested operation required the creation of a temporary file <strong>%1</strong>, however it could not be created."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:1004
#, kde-format
msgid "Could Not Create Link"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:1005
#, kde-format
msgid "Could Not Create Symbolic Link"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:1006
#, kde-format
msgid "The requested symbolic link %1 could not be created."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:1013
#, kde-format
msgid "No Content"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:1018
#, kde-format
msgid "Disk Full"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:1019
#, kde-format
msgid "The requested file <strong>%1</strong> could not be written to as there is inadequate disk space."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:1021
#, kde-format
msgid "Free up enough disk space by 1) deleting unwanted and temporary files; 2) archiving files to removable media storage such as CD-Recordable discs; or 3) obtain more storage capacity."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:1028
#, kde-format
msgid "Source and Destination Files Identical"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:1029
#, kde-format
msgid "The operation could not be completed because the source and destination files are the same file."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:1031
#, kde-format
msgid "Choose a different filename for the destination file."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:1035
#, kde-format
msgid "File or Folder dropped onto itself"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:1036
#, kde-format
msgid "The operation could not be completed because the source and destination file or folder are the same."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:1038
#, kde-format
msgid "Drop the item into a different file or folder."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:1048
#, kde-format
msgid "Folder moved into itself"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:1049
#, kde-format
msgid "The operation could not be completed because the source can not be moved into itself."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:1051
#, kde-format
msgid "Move the item into a different folder."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:1055
#, kde-format
msgid "Could not communicate with password server"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:1056
#, kde-format
msgid "The operation could not be completed because the service for requesting passwords (kpasswdserver) couldn't be contacted"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:1058
#, kde-format
msgid "Try restarting your session, or look in the logs for errors from kiod."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:1061
#, kde-format
msgid "Cannot Initiate the %1 Protocol"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:1062
#, kde-format
msgid "Unable to Create io-slave"
msgstr ""
#. +> trunk5
#: core/job_error.cpp:1063
#, kde-format
msgid "The io-slave which provides access to the <strong>%1</strong> protocol could not be started. This is usually due to technical reasons."
msgstr ""
#. +> trunk5
#: core/job_error.cpp:1066
#, kde-format
msgid "klauncher could not find or start the plugin which provides the protocol.This means you may have an outdated version of the plugin."
msgid "Would you like to accept this certificate forever without being prompted?"
msgstr ""
#. +> trunk5
#: core/tcpslavebase.cpp:943
#, kde-format
msgid "You have indicated that you wish to accept this certificate, but it is not issued to the server who is presenting it. Do you wish to continue loading?"
msgstr ""
#. +> trunk5
#: core/tcpslavebase.cpp:955
#, kde-format
msgid "SSL certificate is being rejected as requested. You can disable this in the KDE System Settings."
msgstr ""
#. +> trunk5
#: filewidgets/kdiroperator.cpp:759
#, kde-format
msgid "A file or folder named %1 already exists."
msgstr ""
#. +> trunk5
#: filewidgets/kdiroperator.cpp:762
#, kde-format
msgid "You do not have permission to create that folder."
"<qt>This is the text that will appear in the Places panel.<br />"
"<br />"
"The label should consist of one or two words that will help you remember what this entry refers to. If you do not enter a label, it will be derived from the location's URL.</qt>"
msgstr ""
#. +> trunk5
#: filewidgets/kfileplaceeditdialog.cpp:102
#, kde-format
msgid "L&abel:"
msgstr ""
#. +> trunk5
#: filewidgets/kfileplaceeditdialog.cpp:104
#, kde-format
msgid "Enter descriptive label here"
msgstr ""
#. +> trunk5
#: filewidgets/kfileplaceeditdialog.cpp:108
#, kde-format
msgid ""
"<qt>This is the location associated with the entry. Any valid URL may be used. For example:<br />"
"<br />"
"%1<br />"
"http://www.kde.org<br />"
"ftp://ftp.kde.org/pub/kde/stable<br />"
"<br />"
"By clicking on the button next to the text edit box you can browse to an appropriate URL.</qt>"
msgstr ""
#. +> trunk5
#: filewidgets/kfileplaceeditdialog.cpp:114
#, kde-format
msgid "&Location:"
msgstr ""
#. +> trunk5
#: filewidgets/kfileplaceeditdialog.cpp:120
#, kde-format
msgid ""
"<qt>This is the icon that will appear in the Places panel.<br />"
"<br />"
"Click on the button to select a different icon.</qt>"
msgstr ""
#. +> trunk5
#: filewidgets/kfileplaceeditdialog.cpp:123
#, kde-format
msgid "Choose an &icon:"
msgstr ""
#. +> trunk5
#: filewidgets/kfileplaceeditdialog.cpp:141
#, kde-format
msgid "&Only show when using this application (%1)"
msgstr ""
#. +> trunk5
#: filewidgets/kfileplaceeditdialog.cpp:143
#, kde-format
msgid ""
"<qt>Select this setting if you want this entry to show only when using the current application (%1).<br />"
"<br />"
"If this setting is not selected, the entry will be available in all applications.</qt>"
msgstr ""
#. +> trunk5
#: filewidgets/kfileplacesitem.cpp:107
#, kde-format
msgctxt "@item"
msgid "Places"
msgstr ""
#. +> trunk5
#: filewidgets/kfileplacesitem.cpp:110
#, kde-format
msgctxt "@item"
msgid "Remote"
msgstr ""
#. +> trunk5
#: filewidgets/kfileplacesitem.cpp:113
#, kde-format
msgctxt "@item"
msgid "Recently Saved"
msgstr ""
#. +> trunk5
#: filewidgets/kfileplacesitem.cpp:116
#, kde-format
msgctxt "@item"
msgid "Search For"
msgstr ""
#. +> trunk5
#: filewidgets/kfileplacesitem.cpp:119
#, kde-format
msgctxt "@item"
msgid "Devices"
msgstr ""
#. +> trunk5
#: filewidgets/kfileplacesitem.cpp:122
#, kde-format
msgctxt "@item"
msgid "Removable Devices"
msgstr ""
#. +> trunk5
#: filewidgets/kfileplacesmodel.cpp:240
#, kde-format
msgctxt "KFile System Bookmarks"
msgid "Home"
msgstr ""
#. +> trunk5
#: filewidgets/kfileplacesmodel.cpp:243
#, kde-format
msgctxt "KFile System Bookmarks"
msgid "Network"
msgstr ""
#. +> trunk5
#: filewidgets/kfileplacesmodel.cpp:255
#, kde-format
msgctxt "KFile System Bookmarks"
msgid "Root"
msgstr ""
#. +> trunk5
#: filewidgets/kfileplacesmodel.cpp:259
#, kde-format
msgctxt "KFile System Bookmarks"
msgid "Trash"
msgstr ""
#. +> trunk5
#: filewidgets/kfileplacesmodel.cpp:279
#, kde-format
msgctxt "KFile System Bookmarks"
msgid "Today"
msgstr ""
#. +> trunk5
#: filewidgets/kfileplacesmodel.cpp:282
#, kde-format
msgctxt "KFile System Bookmarks"
msgid "Yesterday"
msgstr ""
#. +> trunk5
#: filewidgets/kfileplacesmodel.cpp:285
#, kde-format
msgctxt "KFile System Bookmarks"
msgid "This Month"
msgstr ""
#. +> trunk5
#: filewidgets/kfileplacesmodel.cpp:288
#, kde-format
msgctxt "KFile System Bookmarks"
msgid "Last Month"
msgstr ""
#. +> trunk5
#: filewidgets/kfileplacesmodel.cpp:291
#, kde-format
msgctxt "KFile System Bookmarks"
msgid "Documents"
msgstr ""
#. +> trunk5
#: filewidgets/kfileplacesmodel.cpp:294
#, kde-format
msgctxt "KFile System Bookmarks"
msgid "Images"
msgstr ""
#. +> trunk5
#: filewidgets/kfileplacesmodel.cpp:297
#, kde-format
msgctxt "KFile System Bookmarks"
msgid "Audio Files"
msgstr ""
#. +> trunk5
#: filewidgets/kfileplacesmodel.cpp:300
#, kde-format
msgctxt "KFile System Bookmarks"
msgid "Videos"
msgstr ""
#. +> trunk5
#: filewidgets/kfileplacesmodel.cpp:1154
#, kde-format
msgid "&Release '%1'"
msgstr ""
#. +> trunk5
#: filewidgets/kfileplacesmodel.cpp:1156
#, kde-format
msgid "&Safely Remove '%1'"
msgstr ""
#. +> trunk5
#: filewidgets/kfileplacesmodel.cpp:1159
#, kde-format
msgid "&Unmount '%1'"
msgstr ""
#. +> trunk5
#: filewidgets/kfileplacesmodel.cpp:1180
#, kde-format
msgid "&Eject '%1'"
msgstr ""
#. +> trunk5
#: filewidgets/kfileplacesmodel.cpp:1214
#, kde-format
msgid "The device '%1' is not a disk and cannot be ejected."
msgstr ""
#. +> trunk5
#: filewidgets/kfileplacesmodel.cpp:1250
#, kde-format
msgid "An error occurred while accessing '%1', the system responded: %2"
msgid "<qt>While typing in the text area, you may be presented with possible matches. This feature can be controlled by clicking with the right mouse button and selecting a preferred mode from the <b>Text Completion</b> menu.</qt>"
msgstr ""
#. +> trunk5
#: filewidgets/kfilewidget.cpp:396
#, kde-format
msgid "Drive: %1"
msgstr ""
#. +> trunk5
#: filewidgets/kfilewidget.cpp:452
#, kde-format
msgid ""
"<qt>Click this button to enter the parent folder.<br />"
"<br />"
"For instance, if the current location is file:/home/%1 clicking this button will take you to file:/home.</qt>"
msgstr ""
#. +> trunk5
#: filewidgets/kfilewidget.cpp:456
#, kde-format
msgid "Click this button to move backwards one step in the browsing history."
msgstr ""
#. +> trunk5
#: filewidgets/kfilewidget.cpp:457
#, kde-format
msgid "Click this button to move forward one step in the browsing history."
msgstr ""
#. +> trunk5
#: filewidgets/kfilewidget.cpp:459
#, kde-format
msgid "Click this button to reload the contents of the current location."
msgstr ""
#. +> trunk5
#: filewidgets/kfilewidget.cpp:461
#, kde-format
msgid "Click this button to create a new folder."
msgstr ""
#. +> trunk5
#: filewidgets/kfilewidget.cpp:467
#, kde-format
msgid "Show Places Navigation Panel"
msgstr ""
#. +> trunk5
#: filewidgets/kfilewidget.cpp:474
#, kde-format
msgid "Show Bookmarks"
msgstr ""
#. +> trunk5
#: filewidgets/kfilewidget.cpp:479
#, kde-format
msgid "Options"
msgstr ""
#. +> trunk5
#: filewidgets/kfilewidget.cpp:481
#, kde-format
msgid ""
"<qt>This is the preferences menu for the file dialog. Various options can be accessed from this menu including: "
"<qt>This is the filter to apply to the file list. File names that do not match the filter will not be shown."
"<p>You may select from one of the preset filters in the drop down menu, or you may enter a custom filter directly into the text area.</p>"
"<p>Wildcards such as * and ? are allowed.</p>"
"</qt>"
msgstr ""
#. +> trunk5
#: filewidgets/kfilewidget.cpp:596
#, kde-format
msgid "&Filter:"
msgstr ""
#. +> trunk5
#: filewidgets/kfilewidget.cpp:838
#, kde-format
msgid "You can only select one file"
msgstr ""
#. +> trunk5
#: filewidgets/kfilewidget.cpp:839
#, kde-format
msgid "More than one file provided"
msgstr ""
#. +> trunk5
#: filewidgets/kfilewidget.cpp:1006
#, kde-format
msgid "You can only select local files"
msgstr ""
#. +> trunk5
#: filewidgets/kfilewidget.cpp:1007
#, kde-format
msgid "Remote files not accepted"
msgstr ""
#. +> trunk5
#: filewidgets/kfilewidget.cpp:1014
#, kde-format
msgid "The selected URL uses an unsupported scheme. Please use the following scheme: %2"
msgid_plural "The selected URL uses an unsupported scheme. Please use one of the following schemes: %2"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5
#: filewidgets/kfilewidget.cpp:1020
#, kde-format
msgid "Unsupported URL scheme"
msgstr ""
#. +> trunk5
#: filewidgets/kfilewidget.cpp:1035
#, kde-format
msgid "More than one folder has been selected and this dialog does not accept folders, so it is not possible to decide which one to enter. Please select only one folder to list it."
msgstr ""
#. +> trunk5
#: filewidgets/kfilewidget.cpp:1035
#, kde-format
msgid "More than one folder provided"
msgstr ""
#. +> trunk5
#: filewidgets/kfilewidget.cpp:1043
#, kde-format
msgid "At least one folder and one file has been selected. Selected files will be ignored and the selected folder will be listed"
msgstr ""
#. +> trunk5
#: filewidgets/kfilewidget.cpp:1043
#, kde-format
msgid "Files and folders selected"
msgstr ""
#. +> trunk5
#: filewidgets/kfilewidget.cpp:1061
#, kde-format
msgid "The file \"%1\" could not be found"
msgstr ""
#. +> trunk5
#: filewidgets/kfilewidget.cpp:1061
#, kde-format
msgid "Cannot open file"
msgstr ""
#. +> trunk5
#: filewidgets/kfilewidget.cpp:1340
#, kde-format
msgid "This is the name to save the file as."
msgstr ""
#. +> trunk5
#: filewidgets/kfilewidget.cpp:1343
#, kde-format
msgid "This is the list of files to open. More than one file can be specified by listing several files, separated by spaces."
msgstr ""
#. +> trunk5
#: filewidgets/kfilewidget.cpp:1348
#, kde-format
msgid "This is the name of the file to open."
msgstr ""
#. +> trunk5
#: filewidgets/kfilewidget.cpp:1362
#, kde-format
msgctxt "@title:window"
msgid "Places"
msgstr ""
#. +> trunk5
#: filewidgets/kfilewidget.cpp:1554
#, kde-format
msgid "The file \"%1\" already exists. Do you wish to overwrite it?"
"This option enables some convenient features for saving files with extensions:<br />"
"<ol>"
"<li>Any extension specified in the <b>%1</b> text area will be updated if you change the file type to save in.<br />"
"<br />"
"</li>"
"<li>If no extension is specified in the <b>%2</b> text area when you click <b>Save</b>, %3 will be added to the end of the filename (if the filename does not already exist). This extension is based on the file type that you have chosen to save in.<br />"
"<br />"
"If you do not want KDE to supply an extension for the filename, you can either turn this option off or you can suppress it by adding a period (.) to the end of the filename (the period will be automatically removed).</li>"
"</ol>"
"If unsure, keep this option enabled as it makes your files more manageable."
msgstr ""
#. +> trunk5
#: filewidgets/kfilewidget.cpp:2606
#, kde-format
msgid "Bookmarks"
msgstr ""
#. +> trunk5
#: filewidgets/kfilewidget.cpp:2610
#, kde-format
msgid ""
"<qt>This button allows you to bookmark specific locations. Click on this button to open the bookmark menu where you may add, edit or select a bookmark.<br />"
"<br />"
"These bookmarks are specific to the file dialog, but otherwise operate like bookmarks elsewhere in KDE.</qt>"
msgstr ""
#. +> trunk5
#: filewidgets/knewfilemenu.cpp:386
#, kde-format
msgid "Sorry"
msgstr ""
#. +> trunk5
#: filewidgets/knewfilemenu.cpp:395
#, kde-format
msgid "<qt>The template file <b>%1</b> does not exist.</qt>"
msgstr ""
#. +> trunk5
#: filewidgets/knewfilemenu.cpp:414
#, kde-format
msgctxt "@action:button"
msgid "Create directory"
msgstr ""
#. +> trunk5
#: filewidgets/knewfilemenu.cpp:416
#, kde-format
msgctxt "@action:button"
msgid "Enter a different name"
msgstr ""
#. +> trunk5
#: filewidgets/knewfilemenu.cpp:419
#, kde-format
msgid "Create hidden directory?"
msgstr ""
#. +> trunk5
#: filewidgets/knewfilemenu.cpp:429
#, kde-format
msgid "The name \"%1\" starts with a dot, so the directory will be hidden by default."
msgid "The destination resource does not have sufficient space to record the state of the resource after the execution of this method."
msgstr ""
#. +> trunk5
#: ioslaves/http/http.cpp:1786
#, kde-format
msgid "The resource cannot be deleted."
msgstr ""
#. +> trunk5
#: ioslaves/http/http.cpp:1799
#, kde-format
msgctxt "request type"
msgid "upload %1"
msgstr ""
#. +> trunk5
#: ioslaves/http/http.cpp:1849
#, kde-format
msgctxt "%1: response code, %2: request type"
msgid "An unexpected error (%1) occurred while attempting to %2."
msgstr ""
#. +> trunk5
#: ioslaves/http/http.cpp:2675
#, kde-format
msgid "%1 contacted. Waiting for reply..."
msgstr ""
#. +> trunk5
#: ioslaves/http/http.cpp:3019
#, kde-format
msgctxt "@info Security check on url being accessed"
msgid ""
"<p>You are about to log in to the site \"%1\" with the username \"%2\", but the website does not require authentication. This may be an attempt to trick you.</p>"
msgid "Accept cookie(s) until the end of the current session"
msgstr ""
#. +> trunk5
#: ioslaves/http/kcookiejar/kcookiewin.cpp:132
#, kde-format
msgid "&Accept"
msgstr ""
#. +> trunk5
#: ioslaves/http/kcookiejar/kcookiewin.cpp:135
#, kde-format
msgid "&Reject"
msgstr ""
#. +> trunk5
#: ioslaves/http/kcookiejar/kcookiewin.cpp:171
#, kde-format
msgid "Apply Choice To"
msgstr ""
#. +> trunk5
#: ioslaves/http/kcookiejar/kcookiewin.cpp:174
#, kde-format
msgid "&Only this cookie"
msgstr ""
#. +> trunk5
#: ioslaves/http/kcookiejar/kcookiewin.cpp:174
#, kde-format
msgid "&Only these cookies"
msgstr ""
#. +> trunk5
#: ioslaves/http/kcookiejar/kcookiewin.cpp:178
#, kde-format
msgid "Select this option to only accept or reject this cookie. You will be prompted again if you receive another cookie."
msgstr ""
#. +> trunk5
#: ioslaves/http/kcookiejar/kcookiewin.cpp:181
#, kde-format
msgid "All cookies from this do&main"
msgstr ""
#. +> trunk5
#: ioslaves/http/kcookiejar/kcookiewin.cpp:184
#, kde-format
msgid "Select this option to accept or reject all cookies from this site. Choosing this option will add a new policy for the site this cookie originated from. This policy will be permanent until you manually change it from the System Settings."
msgstr ""
#. +> trunk5
#: ioslaves/http/kcookiejar/kcookiewin.cpp:189
#, kde-format
msgid "All &cookies"
msgstr ""
#. +> trunk5
#: ioslaves/http/kcookiejar/kcookiewin.cpp:192
#, kde-format
msgid "Select this option to accept/reject all cookies from anywhere. Choosing this option will change the global cookie policy for all cookies until you manually change it from the System Settings."
msgid "You do not have permission to access the %1 protocol."
msgstr ""
#. +> trunk5
#: ioslaves/trash/kcmtrash.cpp:158
#, kde-format
msgid " days"
msgstr ""
#. +> trunk5
#: ioslaves/trash/kcmtrash.cpp:221
#, kde-format
msgid ""
"<para>KDE's wastebin is configured to use the <b>Finder</b>'s Trash.<br>"
"</para>"
msgstr ""
#. +> trunk5
#: ioslaves/trash/kcmtrash.cpp:223
#, kde-format
msgctxt "@info:whatsthis"
msgid ""
"<para>Emptying KDE's wastebin will remove only KDE's trash items, while<br>"
"emptying the Trash through the Finder will delete everything.</para>"
"<para>KDE's trash items will show up in a folder called KDE.trash, in the Trash can.</para>"
msgstr ""
#. +> trunk5
#: ioslaves/trash/kcmtrash.cpp:258
#, kde-format
msgid "Delete files older than:"
msgstr ""
#. +> trunk5
#: ioslaves/trash/kcmtrash.cpp:260
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid "<para>Check this box to allow <emphasis strong='true'>automatic deletion</emphasis> of files that are older than the value specified. Leave this disabled to <emphasis strong='true'>not</emphasis> automatically delete any items after a certain timespan</para>"
msgstr ""
#. +> trunk5
#: ioslaves/trash/kcmtrash.cpp:267
#, kde-format
msgid " day"
msgid_plural " days"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5
#: ioslaves/trash/kcmtrash.cpp:269
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid "<para>Set the number of days that files can remain in the trash. Any files older than this will be automatically deleted.</para>"
msgstr ""
#. +> trunk5
#: ioslaves/trash/kcmtrash.cpp:277
#, kde-format
msgid "Limit to maximum size"
msgstr ""
#. +> trunk5
#: ioslaves/trash/kcmtrash.cpp:279
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid "<para>Check this box to limit the trash to the maximum amount of disk space that you specify below. Otherwise, it will be unlimited.</para>"
msgstr ""
#. +> trunk5
#: ioslaves/trash/kcmtrash.cpp:297
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid "<para>This is the maximum percent of disk space that will be used for the trash.</para>"
msgstr ""
#. +> trunk5
#: ioslaves/trash/kcmtrash.cpp:302
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid "<para>This is the calculated amount of disk space that will be allowed for the trash, the maximum.</para>"
msgstr ""
#. +> trunk5
#: ioslaves/trash/kcmtrash.cpp:305
#, kde-format
msgid "Maximum size:"
msgstr ""
#. +> trunk5
#: ioslaves/trash/kcmtrash.cpp:307
#, kde-format
msgid "When limit reached:"
msgstr ""
#. +> trunk5
#: ioslaves/trash/kcmtrash.cpp:311
#, kde-format
msgid "Warn Me"
msgstr ""
#. +> trunk5
#: ioslaves/trash/kcmtrash.cpp:312
#, kde-format
msgid "Delete Oldest Files From Trash"
msgstr ""
#. +> trunk5
#: ioslaves/trash/kcmtrash.cpp:313
#, kde-format
msgid "Delete Biggest Files From Trash"
msgstr ""
#. +> trunk5
#: ioslaves/trash/kcmtrash.cpp:315
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid "<para>When the size limit is reached, it will prefer to delete the type of files that you specify, first. If this is set to warn you, it will do so instead of automatically deleting files.</para>"
msgid "The directory %1 does not exist anymore, so it is not possible to restore this item to its original location. You can either recreate that directory and use the restore operation again, or drag the item anywhere else to restore it."
msgid "Internal error in copyOrMove, should never happen"
msgstr ""
#. +> trunk5
#: ioslaves/trash/kio_trash_win.cpp:253
#, kde-format
msgid "not supported"
msgstr ""
#. +> trunk5
#: ioslaves/trash/ktrash.cpp:39
#, kde-format
msgid ""
"Helper program to handle the KDE trash can\n"
"Note: to move files to the trash, do not use ktrash, but \"kioclient move 'url' trash:/\""
msgstr ""
#. +> trunk5
#: ioslaves/trash/ktrash.cpp:42
#, kde-format
msgid "Empty the contents of the trash"
msgstr ""
#. +> trunk5
#: ioslaves/trash/ktrash.cpp:43
#, kde-format
msgid "Restore a trashed file to its original location"
msgstr ""
#. +> trunk5
#: ioslaves/trash/trashimpl.cpp:1396
#, kde-format
msgid "The file is too large to be trashed."
msgstr ""
#. +> trunk5
#: ioslaves/trash/trashimpl.cpp:1402
#, kde-format
msgid ""
"The trash has reached its maximum size!\n"
"Cleanup the trash manually."
msgstr ""
#. +> trunk5
#: kcms/kio/cache.cpp:108
#, kde-format
msgid ""
"<h1>Cache</h1>"
"<p>This module lets you configure your cache settings.</p>"
"<p>This specific cache is an area on the disk where recently read web pages are stored. If you want to retrieve a web page again that you have recently read, it will not be downloaded from the Internet, but rather retrieved from the cache, which is a lot faster.</p>"
msgid "Check this box if you want the web pages you visit to be stored on your hard disk for quicker access. The stored pages will only be updated as needed instead of on every visit to that site. This is especially useful if you have a slow connection to the Internet."
msgid "Do not fetch web pages that are not already stored in the cache. Offline mode prevents you from viewing pages that you have not previously visited."
"<p>Cookies contain information that KDE applications using the HTTP protocol (like Konqueror) store on your computer, initiated by a remote Internet server. This means that a web server can store information about you and your browsing activities on your machine for later use. You might consider this an invasion of privacy.</p>"
"<p> However, cookies are useful in certain situations. For example, they are often used by Internet shops, so you can 'put things into a shopping basket'. Some sites require you have a browser that supports cookies.</p>"
"<p> Because most people want a compromise between privacy and the benefits cookies offer, the HTTP kioslave offers you the ability to customize the way it handles cookies. So you might want to set the default policy to ask you whenever a server wants to set a cookie, allowing you to decide. For your favorite shopping web sites that you trust, you might want to set the policy to accept, then you can access the web sites without being prompted every time a cookie is received.</p>"
"Unable to communicate with the cookie handler service.\n"
"Any changes you made will not take effect until the service is restarted."
msgstr ""
#. +> trunk5
#: kcms/kio/kcookiespolicies.cpp:433
#, kde-format
msgid ""
"<h1>Cookies</h1>"
"<p>Cookies contain information that KDE application using the HTTP protocol (like Konqueror) stores on your computer from a remote Internet server. This means that a web server can store information about you and your browsing activities on your machine for later use. You might consider this an invasion of privacy.</p>"
"<p>However, cookies are useful in certain situations. For example, they are often used by Internet shops, so you can 'put things into a shopping basket'. Some sites require you have a browser that supports cookies.</p>"
"<p>Because most people want a compromise between privacy and the benefits cookies offer, KDE offers you the ability to customize the way it handles cookies. You might, for example want to set KDE's default policy to ask you whenever a server wants to set a cookie or simply reject or accept everything. For example, you might choose to accept all cookies from your favorite shopping web site. For this all you have to do is either browse to that particular site and when you are presented with the cookie dialog box, click on <i> This domain </i> under the 'apply to' tab and choose accept or simply specify the name of the site in the <i> Domain Specific Policy </i> tab and set it to accept. This enables you to receive cookies from trusted web sites without being asked every time KDE receives a cookie.</p>"
"Reject the so called third-party cookies. These are cookies that originate from a site other than the one you are currently browsing. For example, if you visit <b>www.foobar.com</b> while this option is on, only cookies that originate from www.foobar.com will be processed per your settings. Cookies from any other site will be rejected. This reduces the chances of site operators compiling a profile about your daily browsing habits.\n"
"Automatically accept temporary cookies meant to expire at the end of the current session. Such cookies will not be stored in your computer's hard drive or storage device. Instead, they are deleted when you close all applications (e.g. your browser) that use them.</p>"
"<p><u>NOTE</u> Checking this option overrides your default as well as site specific cookie policies for session cookies.</p>"
"To add a new policy, simply click on the <b>Add...</b> button and supply the necessary information. To change an existing policy, use the <b>Change...</b> button and choose the new policy from the policy dialog box. Clicking on the <b>Delete</b> button will remove the currently selected policy causing the default policy setting to be used for that domain, whereas <b>Delete All</b> will remove all the site specific policies.\n"
#. i18n: ectx: label, entry (DisablePassiveMode), group (DesktopIcons)
#. +> trunk5
#: kcms/kio/kio_ftprc.kcfg:10
#, kde-format
msgid "Disable Passive FTP"
msgstr ""
#. i18n: ectx: whatsthis, entry (DisablePassiveMode), group (DesktopIcons)
#. +> trunk5
#: kcms/kio/kio_ftprc.kcfg:11
#, kde-format
msgid "When FTP connections are passive the client connects to the server, instead of the other way round, so firewalls do not block the connection; old FTP servers may not support Passive FTP though."
msgstr ""
#. i18n: ectx: label, entry (MarkPartial), group (Global Options)
#. i18n: ectx: label, entry (MarkPartial), group (DesktopIcons)
msgid "While a file is being uploaded its extension is \".part\". When fully uploaded it is renamed to its real name."
msgstr ""
#. +> trunk5
#: kcms/kio/kproxydlg.cpp:559
#, kde-format
msgid ""
"<h1>Proxy</h1>"
"<p>A proxy server is an intermediate program that sits between your machine and the Internet and provides services such as web page caching and/or filtering.</p>"
"<p>Caching proxy servers give you faster access to sites you have already visited by locally storing or caching the content of those pages; filtering proxy servers, on the other hand, provide the ability to block out requests for ads, spam, or anything else you want to block.</p>"
"<p><u>Note:</u> Some proxy servers provide both services.</p>"
"A proxy server is an intermediate machine that sits between your computer and the Internet and provides services such as web page caching and filtering. Caching proxy servers give you faster access to web sites you have already visited by locally storing or caching those pages; filtering proxy servers usually provide the ability to block out requests for ads, spam, or anything else you want to block.\n"
"<p>\n"
"If you are uncertain whether or not you need to use a proxy server to connect to the Internet, consult your Internet service provider's setup guide or your system administrator.\n"
"Automatically detect and configure the proxy settings."
"<p>\n"
"Automatic detection is performed using the <b>Web Proxy Auto-Discovery Protocol (WPAD)</b>."
"<p>\n"
"<b>NOTE:</b> This option might not work properly or not work at all in some UNIX/Linux distributions. If you encounter a problem when using this option, please check the FAQ section at http://konqueror.kde.org.\n"
"<p>Use proxy settings defined on the system.</p>"
"\n"
"<p>Some platforms offer system wide proxy configuration information and selecting this option allows you to use those settings.</p>"
"\n"
"<p>On Mac platforms</p>"
"\n"
"<p>On Windows platforms</p>"
"\n"
"<p>On Unix and Linux platforms, such system proxy settings are usually defined through environment variables. The following environment variables are detected and used when present: <b>HTTP_PROXY</b>, <b>HTTPS_PROXY</b>, <b>FTP_PROXY</b>, <b>NO_PROXY</b>.</p>"
"<qt>Enter the environment variable, e.g. <b>NO_PROXY</b>, used to store the addresses of sites for which the above proxy settings should not be used."
"<p>Alternatively, you can click on the <b>\"Auto Detect\"</b> button to attempt an automatic discovery of this variable.</p>"
"<p>Enter a comma separated list of hostnames or ip addresses that should be excluded from using the above proxy settings.</p>"
"\n"
"<p>If you want to exclude all hosts for a given domain, then simply enter the domain name preceded by a dot. For example, to exclude all hostnames for <i>kde.org</i>, enter <i>.kde.org</i>. Wildcard characters such as '*' or '?' are not supported and will have no effect.</p>"
"\n"
"<p>Additionally, you can also enter IP addresses, e.g. 127.0.0.1 and IP addresses with a subnet, e.g. 192.168.0.1/24.</p>"
"<p>Marks partially uploaded files through SMB, SFTP and other protocols.</p>"
"<p>When this option is enabled, partially uploaded files will have a \".part\" extension. This extension will be removed once the transfer is complete.</p>"
msgstr ""
#. +> trunk5
#: kcms/kio/netpref.cpp:82
#, kde-format
msgid "FTP Options"
msgstr ""
#. +> trunk5
#: kcms/kio/netpref.cpp:86
#, kde-format
msgid "Enable passive &mode (PASV)"
msgstr ""
#. +> trunk5
#: kcms/kio/netpref.cpp:87
#, kde-format
msgid "Enables FTP's \"passive\" mode. This is required to allow FTP to work from behind firewalls."
msgstr ""
#. +> trunk5
#: kcms/kio/netpref.cpp:94
#, kde-format
msgid ""
"<p>Marks partially uploaded FTP files.</p>"
"<p>When this option is enabled, partially uploaded files will have a \".part\" extension. This extension will be removed once the transfer is complete.</p>"
msgstr ""
#. +> trunk5
#: kcms/kio/netpref.cpp:168
#, kde-format
msgid ""
"<h1>Network Preferences</h1>"
"Here you can define the behavior of KDE programs when using Internet and network connections. If you experience timeouts or use a modem to connect to the Internet, you might want to adjust these settings."
msgstr ""
#. +> trunk5
#: kcms/kio/smbrodlg.cpp:45
#, kde-format
msgid "These settings apply to network browsing only."
msgstr ""
#. +> trunk5
#: kcms/kio/smbrodlg.cpp:49
#, kde-format
msgid "Default user name:"
msgstr ""
#. +> trunk5
#: kcms/kio/smbrodlg.cpp:57
#, kde-format
msgid "Default password:"
msgstr ""
#. +> trunk5
#: kcms/kio/smbrodlg.cpp:176
#, kde-format
msgid ""
"<h1>Windows Shares</h1>"
"<p>Applications using the SMB kioslave (like Konqueror) are able to access shared Microsoft Windows file systems, if properly configured.</p>"
"<p>You can specify here the credentials used to access the shared resources. Passwords will be stored locally, and scrambled so as to render them unreadable to the human eye. For security reasons, you may not want to do that, as entries with passwords are clearly indicated as such.</p>"
msgstr ""
#. +> trunk5
#: kcms/kio/useragentdlg.cpp:81
#, kde-format
msgctxt "@title:window"
msgid "Add Identification"
msgstr ""
#. +> trunk5
#: kcms/kio/useragentdlg.cpp:148
#, kde-format
msgctxt "@title:window"
msgid "Modify Identification"
msgstr ""
#. +> trunk5
#: kcms/kio/useragentdlg.cpp:196
#, kde-format
msgid ""
"<qt>"
"<center>Found an existing identification for<br/>"
"<b>%1</b><br/>"
"Do you want to replace it?</center>"
"</qt>"
msgstr ""
#. +> trunk5
#: kcms/kio/useragentdlg.cpp:201
#, kde-format
msgctxt "@title:window"
msgid "Duplicate Identification"
msgstr ""
#. +> trunk5
#: kcms/kio/useragentdlg.cpp:373
#, kde-format
msgid ""
"<h1>Browser Identification</h1>"
"<p>The browser-identification module allows you to have full control over how KDE applications using the HTTP protocol (like Konqueror) will identify itself to web sites you browse.</p>"
"<p>This ability to fake identification is necessary because some web sites do not display properly when they detect that they are not talking to current versions of either Netscape Navigator or Internet Explorer, even if the browser actually supports all the necessary features to render those pages properly. For such sites, you can use this feature to try to browse them. Please understand that this might not always work, since such sites might be using non-standard web protocols and or specifications.</p>"
"<p><u>NOTE:</u> To obtain specific help on a particular section of the dialog box, simply click on the quick help button on the window title bar, then click on the section for which you are seeking help.</p>"
"Here you can modify the default browser-identification text or set a site <code>(eg. www.kde.org)</code> or a domain <code>(eg. kde.org)</code> specific identification text."
"<p>\n"
"To add a new site-specific identification text, click the <code>New</code> button and supply the necessary information. To change an existing site-specific entry, click on the <code>Change</code> button. The <code>Delete</code> button will remove the selected site-specific identification text, causing the default setting to be used for that site or domain.\n"
"<u>NOTE:</u> Many sites rely on this information to display pages properly, hence, it is highly recommended that you do not totally disable this feature but rather customize it."
"<p>\n"
"By default, only minimal identification information is sent to remote sites. The identification text that will be sent is shown below.\n"
"Enter the site or domain name where a fake browser identification should be used."
"<p>\n"
"<u>NOTE:</u> Wildcard syntax such as \\\"*,?\\\" is NOT allowed: instead, use the top level address of a site to make generic matches; for example, if you want all KDE sites to receive a fake browser identification, you would enter <code>kde.org</code> - the fake identity would then be sent to any KDE site that ends with <code>kde.org</code>.</p>"
" In this module you can configure some enhanced browsing features of KDE. "
"<h2>Web Shortcuts</h2>"
"Web Shortcuts are a quick way of using Web search engines. For example, type \"duckduckgo:frobozz\" or \"dd:frobozz\" and your web browser will do a search on DuckDuckGo for \"frobozz\". Even easier: just press Alt+F2 (if you have not changed this keyboard shortcut) and enter the shortcut in the Run Command dialog."
msgstr ""
#. +> trunk5
#: kioexec/kioexecd.cpp:85
#, kde-format
msgid ""
"The file %1\n"
"has been modified. Do you want to upload the changes?"
msgid "(c) 1998-2000,2003 The KFM/Konqueror Developers"
msgstr ""
#. +> trunk5
#: kioexec/main.cpp:276
#, kde-format
msgid "David Faure"
msgstr ""
#. +> trunk5
#: kioexec/main.cpp:277
#, kde-format
msgid "Stephan Kulow"
msgstr ""
#. +> trunk5
#: kioexec/main.cpp:278
#, kde-format
msgid "Bernhard Rosenkraenzer"
msgstr ""
#. +> trunk5
#: kioexec/main.cpp:279
#, kde-format
msgid "Waldo Bastian"
msgstr ""
#. +> trunk5
#: kioexec/main.cpp:280
#, kde-format
msgid "Oswald Buddenhagen"
msgstr ""
#. +> trunk5
#: kioexec/main.cpp:287
#, kde-format
msgid "Treat URLs as local files and delete them afterwards"
msgstr ""
#. +> trunk5
#: kioexec/main.cpp:288
#, kde-format
msgid "Suggested file name for the downloaded file"
msgstr ""
#. +> trunk5
#: kioexec/main.cpp:289
#, kde-format
msgid "Command to execute"
msgstr ""
#. +> trunk5
#: kioexec/main.cpp:290
#, kde-format
msgid "URL(s) or local file(s) used for 'command'"
msgstr ""
#. +> trunk5
#: kpac/discovery.cpp:112
#, kde-format
msgid "Could not find a usable proxy configuration script"
msgstr ""
#. +> trunk5
#: kpac/downloader.cpp:92
#, kde-format
msgid ""
"Could not download the proxy configuration script:\n"
"%1"
msgstr ""
#. +> trunk5
#: kpac/downloader.cpp:95
#, kde-format
msgid "Could not download the proxy configuration script"
msgstr ""
#. +> trunk5
#: kpac/proxyscout.cpp:240
#, kde-format
msgid ""
"The proxy configuration script is invalid:\n"
"%1"
msgstr ""
#. +> trunk5
#: kpac/proxyscout.cpp:353
#, kde-format
msgid ""
"The proxy configuration script returned an error:\n"
"%1"
msgstr ""
#. +> trunk5
#: kpac/script.cpp:752
#, kde-format
msgid "Could not find 'FindProxyForURL' or 'FindProxyForURLEx'"
msgstr ""
#. +> trunk5
#: kpac/script.cpp:770
#, kde-format
msgid "Got an invalid reply when calling %1"
msgstr ""
#. +> trunk5
#: kpasswdserver/kpasswdserver.cpp:568
#, kde-format
msgid "Do you want to retry?"
msgstr ""
#. +> trunk5
#: kpasswdserver/kpasswdserver.cpp:573
#, kde-format
msgid "Retry Authentication"
msgstr ""
#. +> trunk5
#: kpasswdserver/kpasswdserver.cpp:577
#, kde-format
msgctxt "@action:button filter-continue"
msgid "Retry"
msgstr ""
#. +> trunk5
#: kpasswdserver/kpasswdserver.cpp:873
#, kde-format
msgid "Authentication Dialog"
msgstr ""
#. +> trunk5
#: urifilters/ikws/ikwsopts.cpp:53
#, kde-format
msgctxt "@title:column Name label from web shortcuts column"
msgid "Name"
msgstr ""
#. +> trunk5
#: urifilters/ikws/ikwsopts.cpp:55
#, kde-format
msgctxt "@title:column"
msgid "Shortcuts"
msgstr ""
#. +> trunk5
#: urifilters/ikws/ikwsopts.cpp:57
#, kde-format
msgctxt "@title:column"
msgid "Preferred"
msgstr ""
#. +> trunk5
#: urifilters/ikws/ikwsopts.cpp:106
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid ""
"Check this box to select the highlighted web shortcut as preferred.<nl/>"
"Preferred web shortcuts are used in places where only a few select shortcuts can be shown at one time."
msgstr ""
#. +> trunk5
#: urifilters/ikws/ikwsopts.cpp:199
#, kde-format
msgctxt "@item:inlistbox No default web shortcut"
msgid "None"
msgstr ""
#. +> trunk5
#: urifilters/ikws/ikwsopts.cpp:263
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<para>In this module you can configure the web shortcuts feature. Web shortcuts allow you to quickly search or lookup words on the Internet. For example, to search for information about the KDE project using the Google engine, you simply type <emphasis>gg:KDE</emphasis> or <emphasis>google:KDE</emphasis>.</para>"
"<para>If you select a default search engine, then you can search for normal words or phrases by simply typing them into the input widget of applications that have built-in support for such a feature, e.g Konqueror.</para>"
"<p>Web shortcuts allow you to quickly access or search for information located online or on your hard drive. </p>"
"<p>KDE comes with many predefined Web shortcuts. One such Web shortcut is the Google (TM) search shortcut. To use it, you simply type the keyword 'gg' followed by the keyword delimiter and the search term, e.g. <span style=\" font-weight:600;\">gg:KDE</span>.</p>"
"Select the search engine to use for input boxes that provide automatic lookup services when you type in normal words and phrases instead of a URL. To disable this feature select <b>None</b> from the list.\n"
"<p>This allows applications to automatically convert the typed word or phrase to web shortcut queries when they cannot be filtered into a proper URL. </p>"
"<p>To disable this functionality select <span style=\" font-weight:600;\">None</span> from the list. </p>"
"Enter the URI that is used to perform a search on the search engine here.<br/>"
"The whole text to be searched for can be specified as \\{@} or \\{0}.<br/>"
"\n"
"Recommended is \\{@}, since it removes all query variables (name=value) from the resulting string, whereas \\{0} will be substituted with the unmodified query string.<br/>"
"You can use \\{1} ... \\{n} to specify certain words from the query and \\{name} to specify a value given by 'name=value' in the user query.<br/>"
"In addition it is possible to specify multiple references (names, numbers and strings) at once (\\{name1,name2,...,\"string\"}).<br/>"
"The first matching value (from the left) will be used as the substitution value for the resulting URI.<br/>"
"A quoted string can be used as the default value if nothing matches from the left of the reference list.\n"
"The shortcuts entered here can be used as a pseudo-URI scheme in KDE. For example, the shortcut <b>av</b> can be used as in <b>av</b>:<b>my search</b>\n"
msgid "Check this option if the application you want to run is a text mode application or if you want the information that is provided by the terminal emulator window."
msgid "Check this option if the text mode application offers relevant information on exit. Keeping the terminal emulator open allows you to retrieve this information."
msgid "Check this option if you want to run this application with a different user id. Every process has a different user id associated with it. This id code determines file access and other permissions. The password of the user is required to use this option."
msgid "Check this option if you want to make clear that your application has started. This visual feedback may appear as a busy cursor or in the taskbar."
msgid "Type the name you want to give to this application here. This application will appear under this name in the applications menu and in the panel."
"<p>This list should show the types of file that your application can handle. This list is organized by <u>mimetypes</u>.</p>"
"\n"
"<p>MIME, Multipurpose Internet (e)Mail Extension, is a standard protocol for identifying the type of data based on filename extensions and correspondent <u>mimetypes</u>. Example: the \"bmp\" part that comes after the dot in flower.bmp indicates that it is a specific kind of image, <u>image/x-bmp</u>. To know which application should open each type of file, the system should be informed about the abilities of each application to handle these extensions and mimetypes.</p>"
"\n"
"<p>If you want to associate this application with one or more mimetypes that are not in this list, click on the button <b>Add</b> below. If there are one or more filetypes that this application cannot handle, you may want to remove them from the list clicking on the button <b>Remove</b> below.</p>"
msgid "If you want to remove a type of file (mimetype) that your application cannot handle, select the mimetype in the list above and click on this button."
msgid "This file is a link and does not have permissions."
msgid_plural "All files are links and do not have permissions."
msgstr[0] ""
msgstr[1] ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:1776
#, kde-format
msgid "Only the owner can change permissions."
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:1780
#, kde-format
msgid "O&wner:"
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:1786
#, kde-format
msgid "Specifies the actions that the owner is allowed to do."
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:1788
#, kde-format
msgid "Gro&up:"
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:1794
#, kde-format
msgid "Specifies the actions that the members of the group are allowed to do."
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:1796
#, kde-format
msgid "O&thers:"
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:1802
#, kde-format
msgid "Specifies the actions that all users, who are neither owner nor in the group, are allowed to do."
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:1807
#, kde-format
msgid "Only own&er can rename and delete folder content"
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:1808
#, kde-format
msgid "Is &executable"
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:1812
#, kde-format
msgid "Enable this option to allow only the folder's owner to delete or rename the contained files and folders. Other users can only add new files, which requires the 'Modify Content' permission."
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:1816
#, kde-format
msgid "Enable this option to mark the file as executable. This only makes sense for programs and scripts. It is required when you want to execute them."
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:1823
#, kde-format
msgid "A&dvanced Permissions"
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:1831
#, kde-format
msgid "Ownership"
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:1838
#, kde-format
msgid "User:"
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:1882
#, kde-format
msgid "Group:"
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:1919
#, kde-format
msgid "Apply changes to all subfolders and their contents"
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:1958
#, kde-format
msgid "Advanced Permissions"
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:1975
#, kde-format
msgid "Class"
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:1982
#, kde-format
msgid ""
"Show\n"
"Entries"
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:1983
#, kde-format
msgid "This flag allows viewing the content of the folder."
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:1985
#, kde-format
msgid "Read"
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:1986
#, kde-format
msgid "The Read flag allows viewing the content of the file."
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:1992
#, kde-format
msgid ""
"Write\n"
"Entries"
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:1993
#, kde-format
msgid "This flag allows adding, renaming and deleting of files. Note that deleting and renaming can be limited using the Sticky flag."
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:1996
#, kde-format
msgid "Write"
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:1997
#, kde-format
msgid "The Write flag allows modifying the content of the file."
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2003
#, kde-format
msgctxt "Enter folder"
msgid "Enter"
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2004
#, kde-format
msgid "Enable this flag to allow entering the folder."
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2006
#, kde-format
msgid "Exec"
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2007
#, kde-format
msgid "Enable this flag to allow executing the file as a program."
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2015
#, kde-format
msgid "Special"
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2019
#, kde-format
msgid "Special flag. Valid for the whole folder, the exact meaning of the flag can be seen in the right hand column."
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2022
#, kde-format
msgid "Special flag. The exact meaning of the flag can be seen in the right hand column."
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2026
#, kde-format
msgid "User"
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2030
#, kde-format
msgid "Group"
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2040
#, kde-format
msgid "If this flag is set, the owner of this folder will be the owner of all new files."
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2043
#, kde-format
msgid "If this file is an executable and the flag is set, it will be executed with the permissions of the owner."
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2048
#, kde-format
msgid "If this flag is set, the group of this folder will be set for all new files."
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2051
#, kde-format
msgid "If this file is an executable and the flag is set, it will be executed with the permissions of the group."
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2056
#, kde-format
msgid "If the Sticky flag is set on a folder, only the owner and root can delete or rename files. Otherwise everybody with write permissions can do this."
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2060
#, kde-format
msgid "The Sticky flag on a file is ignored on Linux, but may be used on some systems"
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2125
#, kde-format
msgid "Set UID"
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2129
#, kde-format
msgid "Set GID"
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2133
#, kde-format
msgctxt "File permission"
msgid "Sticky"
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2253
#, kde-format
msgid "Link"
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2272
#, kde-format
msgid "Varying (No Change)"
msgstr ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2385
#, kde-format
msgid "This file uses advanced permissions"
msgid_plural "These files use advanced permissions."
msgstr[0] ""
msgstr[1] ""
#. +> trunk5
#: widgets/kpropertiesdialog.cpp:2406
#, kde-format
msgid "This folder uses advanced permissions."
msgid_plural "These folders use advanced permissions."
# This file is distributed under the same license as the PACKAGE package.
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
#, fuzzy
msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To: http://bugs.kde.org\n"
-"POT-Creation-Date: 2018-02-15 08:51+0100\n"
+"POT-Creation-Date: 2018-02-18 09:37+0100\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <kde-i18n-doc@kde.org>\n"
"Language: \n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
#. +> trunk5 stable5 plasma5lts
#, kde-format
msgctxt "NAME OF TRANSLATORS"
msgid "Your names"
msgstr ""
#. +> trunk5 stable5 plasma5lts
#, kde-format
msgctxt "EMAIL OF TRANSLATORS"
msgid "Your emails"
msgstr ""
#. +> trunk5 stable5 plasma5lts
-#: kcm.cpp:83
+#: kcm.cpp:81
#, kde-format
msgid "Configure Look and Feel details"
msgstr ""
#. +> trunk5 stable5 plasma5lts
-#: kcm.cpp:85 lnftool.cpp:43
+#: kcm.cpp:83 lnftool.cpp:43
#, kde-format
msgid "Marco Martin"
msgstr ""
#. +> trunk5 stable5 plasma5lts
-#: kcm.cpp:117
+#: kcm.cpp:115
#, kde-format
msgid "Download New Look And Feel Packages"
msgstr ""
#. +> trunk5
-#: kcm.cpp:555
+#: kcm.cpp:553
#, kde-format
msgid "You have to restart the Plasma session for these changes to take effect."
msgstr ""
#. +> stable5 plasma5lts
-#: kcm.cpp:556
+#: kcm.cpp:554
#, kde-format
msgid "You have to restart KDE for cursor changes to take effect."
msgstr ""
#. +> trunk5 stable5 plasma5lts
-#: kcm.cpp:556
+#: kcm.cpp:554
#, kde-format
msgid "Cursor Settings Changed"
msgstr ""
#. +> trunk5 stable5
#: lnftool.cpp:42
#, kde-format
msgid "Look and feel tool"
msgstr ""
#. +> trunk5 stable5
#: lnftool.cpp:42
#, kde-format
msgid "Command line tool to apply look and feel packages."
msgstr ""
#. +> trunk5 stable5
#: lnftool.cpp:42
#, kde-format
msgid "Copyright 2017, Marco Martin"
msgstr ""
#. +> trunk5 stable5
#: lnftool.cpp:43
#, kde-format
msgid "Maintainer"
msgstr ""
#. +> trunk5 stable5
#: lnftool.cpp:52
#, kde-format
msgid "List available Look and feel packages"
msgstr ""
#. +> trunk5 stable5
#: lnftool.cpp:54
#, kde-format
msgid "Apply a look and feel package"
msgstr ""
#. +> trunk5 stable5
#: lnftool.cpp:54
#, kde-format
msgid "packagename"
msgstr ""
#. +> trunk5 stable5
#: lnftool.cpp:56
#, kde-format
msgid "Reset the Plasma Desktop layout"
msgstr ""
#. +> trunk5 stable5 plasma5lts
#: package/contents/ui/main.qml:34
#, kde-format
msgid "This module lets you configure the look of the whole workspace with some ready to go presets."
msgstr ""
#. +> trunk5 stable5 plasma5lts
#: package/contents/ui/main.qml:50
#, kde-format
msgid "Select an overall theme for your workspace (including plasma theme, color scheme, mouse cursor, window and desktop switcher, splash screen, lock screen etc.)"
msgstr ""
#. +> plasma5lts
#: package/contents/ui/main.qml:154
#, kde-format
msgid "Test Splashscreen"
msgstr ""
#. +> trunk5 stable5
#: package/contents/ui/main.qml:162
#, kde-format
msgid "Show Preview"
msgstr ""
#. +> trunk5 stable5 plasma5lts
#: package/contents/ui/main.qml:182
#, kde-format
msgid "Warning: your Plasma Desktop layout will be lost and reset to the default layout provided by the selected theme."
msgid "Translates into any language using Google Translate. For list of supported languages visit https://developers.google.com/translate/v2/using_rest?hl=de#language-params"
msgid "The following piece of software cannot be verified. <warning>Installing unverified software represents a security risk, as the presence of unverifiable software can be a sign of tampering.</warning> Do you wish to continue?"
msgid_plural "The following pieces of software cannot be verified. <warning>Installing unverified software represents a security risk, as the presence of unverifiable software can be a sign of tampering.</warning> Do you wish to continue?"
msgid "A new version of the configuration file <filename>%1</filename> is available, but your version has been modified. Would you like to keep your current version or install the new version?"
msgctxt "@info:status Package locked at a certain version"
msgid "Locked"
msgstr ""
#. +> stable5 plasma5lts
#: libmuonapt/MuonStrings.cpp:222
#, kde-format
msgctxt "@info:status Package state"
msgid "Manually held back"
msgstr ""
#. +> stable5
#: libmuonapt/MuonStrings.cpp:243
#, kde-format
msgctxt "@item:inlistbox"
msgid "Common"
msgstr ""
#. +> stable5
#: libmuonapt/MuonStrings.cpp:244
#, kde-format
msgctxt "@item:inlistbox CPU architecture"
msgid "32-bit"
msgstr ""
#. +> stable5
#: libmuonapt/MuonStrings.cpp:245
#, kde-format
msgctxt "@item:inlistbox CPU architecture"
msgid "64-bit"
msgstr ""
#. +> stable5
#: libmuonapt/MuonStrings.cpp:246
#, kde-format
msgctxt "@item:inlistbox PU architecture"
msgid "Power PC"
msgstr ""
#. +> stable5 plasma5lts
#: libmuonapt/MuonStrings.cpp:265
#, kde-format
msgctxt "@title:window"
msgid "Initialization Error"
msgstr ""
#. +> stable5 plasma5lts
#: libmuonapt/MuonStrings.cpp:267
#, kde-format
msgctxt "@title:window"
msgid "Unable to Obtain Package System Lock"
msgstr ""
#. +> stable5 plasma5lts
#: libmuonapt/MuonStrings.cpp:269
#, kde-format
msgctxt "@title:window"
msgid "Low Disk Space"
msgstr ""
#. +> stable5 plasma5lts
#: libmuonapt/MuonStrings.cpp:272
#, kde-format
msgctxt "@title:window"
msgid "Failed to Apply Changes"
msgstr ""
#. +> stable5 plasma5lts
#: libmuonapt/MuonStrings.cpp:274
#, kde-format
msgctxt "@title:window"
msgid "Authentication error"
msgstr ""
#. +> stable5 plasma5lts
#: libmuonapt/MuonStrings.cpp:276
#, kde-format
msgctxt "@title:window"
msgid "Unexpected Error"
msgstr ""
#. +> stable5 plasma5lts
#: libmuonapt/MuonStrings.cpp:278
#, kde-format
msgctxt "@title:window"
msgid "Untrusted Packages"
msgstr ""
#. +> stable5 plasma5lts
#: libmuonapt/MuonStrings.cpp:281
#, kde-format
msgctxt "@title:window"
msgid "Unknown Error"
msgstr ""
#. +> stable5 plasma5lts
#: libmuonapt/MuonStrings.cpp:291
#, kde-format
msgctxt "@label"
msgid "The package system could not be initialized, your configuration may be broken."
msgstr ""
#. +> stable5 plasma5lts
#: libmuonapt/MuonStrings.cpp:296
#, kde-format
msgctxt "@label"
msgid "Another application seems to be using the package system at this time. You must close all other package managers before you will be able to install or remove any packages."
msgstr ""
#. +> stable5 plasma5lts
#: libmuonapt/MuonStrings.cpp:303
#, kde-format
msgctxt "@label"
msgid "You do not have enough disk space in the directory at %1 to continue with this operation."
msgstr ""
#. +> stable5 plasma5lts
#: libmuonapt/MuonStrings.cpp:307
#, kde-format
msgctxt "@label"
msgid "Could not download packages"
msgstr ""
#. +> stable5 plasma5lts
#: libmuonapt/MuonStrings.cpp:310
#, kde-format
msgctxt "@label"
msgid "An error occurred while applying changes:"
msgstr ""
#. +> stable5 plasma5lts
#: libmuonapt/MuonStrings.cpp:314
#, kde-format
msgctxt "@label"
msgid "This operation cannot continue since proper authorization was not provided"
msgstr ""
#. +> stable5 plasma5lts
#: libmuonapt/MuonStrings.cpp:318
#, kde-format
msgctxt "@label"
msgid "It appears that the QApt worker has either crashed or disappeared. Please report a bug to the QApt maintainers"
msgstr ""
#. +> stable5 plasma5lts
#: libmuonapt/MuonStrings.cpp:323
#, kde-format
msgctxt "@label"
msgid "The following package has not been verified by its author. Downloading untrusted packages has been disallowed by your current configuration."
msgid_plural "The following packages have not been verified by their authors. Downloading untrusted packages has been disallowed by your current configuration."
msgstr[0] ""
msgstr[1] ""
#. +> stable5 plasma5lts
#: libmuonapt/QAptActions.cpp:118
#, kde-format
msgctxt "@action Reverts all potential changes to the cache"
msgid "Unmark All"
msgstr ""
#. +> stable5 plasma5lts
#: libmuonapt/QAptActions.cpp:125
#, kde-format
msgctxt "@action Opens the software sources configuration dialog"
msgid "Configure Software Sources"
msgstr ""
#. +> stable5 plasma5lts
#: libmuonapt/QAptActions.cpp:131
#, kde-format
msgctxt "@action"
msgid "Read Markings..."
msgstr ""
#. +> stable5 plasma5lts
#: libmuonapt/QAptActions.cpp:137
#, kde-format
msgctxt "@action"
msgid "Save Markings As..."
msgstr ""
#. +> stable5 plasma5lts
#: libmuonapt/QAptActions.cpp:144
#, kde-format
msgctxt "@action"
msgid "Save Package Download List..."
msgstr ""
#. +> stable5 plasma5lts
#: libmuonapt/QAptActions.cpp:151
#, kde-format
msgctxt "@action"
msgid "Download Packages From List..."
msgstr ""
#. +> stable5 plasma5lts
#: libmuonapt/QAptActions.cpp:160
#, kde-format
msgctxt "@action"
msgid "Add Downloaded Packages"
msgstr ""
#. +> stable5 plasma5lts
#: libmuonapt/QAptActions.cpp:167
#, kde-format
msgctxt "@action"
msgid "Save Installed Packages List..."
msgstr ""
#. +> stable5 plasma5lts
#: libmuonapt/QAptActions.cpp:173
#, kde-format
msgctxt "@action::inmenu"
msgid "History..."
msgstr ""
#. +> stable5 plasma5lts
#: libmuonapt/QAptActions.cpp:179
#, kde-format
msgctxt "@action"
msgid "Upgrade"
msgstr ""
#. +> stable5 plasma5lts
#: libmuonapt/QAptActions.cpp:182
#, kde-format
msgctxt "Notification when a new version of Kubuntu is available"
msgid "Could not mark changes. Please make sure that the file is a markings file created by either the Muon Package Manager or the Synaptic Package Manager."
msgstr ""
#. +> stable5 plasma5lts
#: libmuonapt/QAptActions.cpp:333
#, kde-format
msgctxt "@title:window"
msgid "Choose a Directory"
msgstr ""
#. +> stable5 plasma5lts
#: libmuonapt/QAptActions.cpp:356
#, kde-format
msgctxt "@label"
msgid "%1 package was successfully added to the cache"
msgid_plural "%1 packages were successfully added to the cache"
msgstr[0] ""
msgstr[1] ""
#. +> stable5 plasma5lts
#: libmuonapt/QAptActions.cpp:362
#, kde-format
msgctxt "@label"
msgid "No valid packages could be found in this directory. Please make sure the packages are compatible with your computer and are at the latest version."
msgid "Here you can configure your default file manager. The entries in the K menu and all KDE applications in which you can open folders will use this file manager."
msgid "This service allows you to configure your default email client. All KDE applications which need access to an email client application should honor this setting."
msgid "This service allows you to configure your default terminal emulator. All KDE applications which invoke a terminal emulator application should honor this setting."
msgstr ""
#. +> trunk5 stable5 plasma5lts
#: kcms/componentchooser/EXAMPLE.desktop:1
msgctxt "Name"
msgid "A nice name you have chosen for your interface"
msgstr ""
#. +> trunk5 stable5 plasma5lts
#: kcms/componentchooser/EXAMPLE.desktop:89
msgctxt "Comment"
msgid "A helpful description of the interface for the top right info box"
msgid "At least one of the items in the clipboard could not be pasted because an item of the same name already exists. Any other items have been pasted."
"The views are stored in folders in the document. The same tree structure used in the document to store the views can be created in the selected base directory with this option.\n"
"Only the folders made by the user are created in the base directory (Logical view, use case view and so on are not created)."
"<p>The auto layout feature depends on layout generators provided by the GraphViz package, which is normally installed aside Umbrello by a package manager.</p>"
"\n"
"<p>Umbrello has build in support for detecting the install location of these layout generators. For cases where this dependency is not available or do not fit, a different installation path could be provided.</p>"
msgid "Turn on footer and page numbers when printing"
msgstr ""
#. +> trunk5 stable5
#: dialogs/pages/generaloptionpage.cpp:84
#, kde-format
msgid "Autosave"
msgstr ""
#. +> trunk5 stable5
#: dialogs/pages/generaloptionpage.cpp:91
#, kde-format
msgid "E&nable autosave"
msgstr ""
#. +> trunk5 stable5
#: dialogs/pages/generaloptionpage.cpp:95
#, kde-format
msgid "Select auto-save time interval (mins):"
msgstr ""
#. +> trunk5 stable5
#: dialogs/pages/generaloptionpage.cpp:111
#, kde-format
msgid "Set autosave suffix:"
msgstr ""
#. +> trunk5 stable5
#: dialogs/pages/generaloptionpage.cpp:113
#, kde-format
msgid ""
"<qt>"
"<p>The autosave file will be saved to ~/autosave.xmi if the autosaving occurs before you have manually saved the file.</p>"
"<p>If you have already saved it, the autosave file will be saved in the same folder as the file and will be named like the file's name, followed by the suffix specified.</p>"
"<p>If the suffix is equal to the suffix of the file you have saved, the autosave will overwrite your file automatically.</p>"
#. m_pProtectedRB = new QRadioButton(i18n("&Unique"), m_pScopeGB);
#. scopeLayout->addWidget(m_pProtectedRB);
#.
#. +> trunk5 stable5
#: dialogs/umlentityattributedialog.cpp:132
#, kde-format
msgid "&Indexed"
msgstr ""
#. +> trunk5 stable5
#: dialogs/umlentityattributedialog.cpp:170
#, kde-format
msgid "You have entered an invalid entity attribute name."
msgstr ""
#. +> trunk5 stable5
#: dialogs/umlentityattributedialog.cpp:171
#, kde-format
msgid "Entity Attribute Name Invalid"
msgstr ""
#. +> trunk5 stable5
#: dialogs/umlentityattributedialog.cpp:178
#, kde-format
msgid "The entity attribute name you have chosen is already being used in this operation."
msgstr ""
#. +> trunk5 stable5
#: dialogs/umlentityattributedialog.cpp:179
#, kde-format
msgid "Entity Attribute Name Not Unique"
msgstr ""
#. +> trunk5 stable5
#: dialogs/umlenumliteraldialog.cpp:34
#, kde-format
msgid "EnumLiteral Properties"
msgstr ""
#. +> trunk5 stable5
#: dialogs/umlenumliteraldialog.cpp:60
#, kde-format
msgctxt "literal name"
msgid "&Name:"
msgstr ""
#. +> trunk5 stable5
#: dialogs/umlenumliteraldialog.cpp:64
#, kde-format
msgid "&Value:"
msgstr ""
#. +> trunk5 stable5
#: dialogs/umlfiledialog.cpp:139
#, kde-format
msgid "All Supported Files"
msgstr ""
#. +> trunk5 stable5
#: dialogs/umlforeignkeyconstraintdialog.cpp:62
#, kde-format
msgid "Foreign Key Setup"
msgstr ""
#. +> trunk5 stable5
#: dialogs/umlforeignkeyconstraintdialog.cpp:205
#, kde-format
msgctxt "general page title"
msgid "General"
msgstr ""
#. +> trunk5 stable5
#: dialogs/umlforeignkeyconstraintdialog.cpp:208
#, kde-format
msgctxt "general group title"
msgid "General"
msgstr ""
#. +> trunk5 stable5
#: dialogs/umlforeignkeyconstraintdialog.cpp:216
#, kde-format
msgctxt "label for entering name"
msgid "Name"
msgstr ""
#. +> trunk5 stable5
#: dialogs/umlforeignkeyconstraintdialog.cpp:219
#, kde-format
msgid "Referenced Entity"
msgstr ""
#. +> trunk5 stable5
#: dialogs/umlforeignkeyconstraintdialog.cpp:225
#, kde-format
msgid "Actions"
msgstr ""
#. +> trunk5 stable5
#: dialogs/umlforeignkeyconstraintdialog.cpp:232
#, kde-format
msgid "On Update"
msgstr ""
#. +> trunk5 stable5
#: dialogs/umlforeignkeyconstraintdialog.cpp:238
#, kde-format
msgid "On Delete"
msgstr ""
#. +> trunk5 stable5
#: dialogs/umlforeignkeyconstraintdialog.cpp:270
#, kde-format
msgid "No Action"
msgstr ""
#. +> trunk5 stable5
#: dialogs/umlforeignkeyconstraintdialog.cpp:270
#, kde-format
msgid "Restrict"
msgstr ""
#. +> trunk5 stable5
#: dialogs/umlforeignkeyconstraintdialog.cpp:270
#, kde-format
msgid "Cascade"
msgstr ""
#. +> trunk5 stable5
#: dialogs/umlforeignkeyconstraintdialog.cpp:270
#, kde-format
msgid "Set Null"
msgstr ""
#. +> trunk5 stable5
#: dialogs/umlforeignkeyconstraintdialog.cpp:271
#, kde-format
msgid "Set Default"
msgstr ""
#. +> trunk5 stable5
#: dialogs/umlforeignkeyconstraintdialog.cpp:292
#, kde-format
msgid "Columns"
msgstr ""
#. +> trunk5 stable5
#: dialogs/umlforeignkeyconstraintdialog.cpp:299
#, kde-format
msgctxt "column header local"
msgid "Local"
msgstr ""
#. +> trunk5 stable5
#: dialogs/umlforeignkeyconstraintdialog.cpp:299
#, kde-format
msgctxt "column header referenced"
msgid "Referenced"
msgstr ""
#. +> trunk5 stable5
#: dialogs/umlforeignkeyconstraintdialog.cpp:306
#, kde-format
msgid "Local Column"
msgstr ""
#. +> trunk5 stable5
#: dialogs/umlforeignkeyconstraintdialog.cpp:312
#, kde-format
msgid "Referenced Column"
msgstr ""
#. +> trunk5 stable5
#: dialogs/umlforeignkeyconstraintdialog.cpp:320
#: dialogs/umlforeignkeyconstraintdialog.cpp:326
#: dialogs/umluniqueconstraintdialog.cpp:115
#: dialogs/umluniqueconstraintdialog.cpp:121
#, kde-format
msgid "&Add"
msgstr ""
#. +> trunk5 stable5
#: dialogs/umlforeignkeyconstraintdialog.cpp:402
#, kde-format
msgid "You are attempting to change the Referenced Entity of this ForeignKey Constraint. Any unapplied changes to the mappings between local and referenced entities will be lost. Are you sure you want to continue ?"
msgstr ""
#. +> trunk5 stable5
#: dialogs/umlinstanceattributedialog.cpp:26
#, kde-format
msgid "Object Attribute Properties"
msgstr ""
#. +> trunk5 stable5
#: dialogs/umlinstanceattributedialog.cpp:43
#, kde-format
msgid "Class Name Invalid"
msgstr ""
#. +> trunk5 stable5
#: dialogs/umlinstanceattributedialog.cpp:47
#, kde-format
msgid "You have entered an invalid attribute value."
msgid "<b>Note:</b> This is an HTML message. For security reasons, only the raw HTML code is shown. If you trust the sender of this message then you can activate formatted HTML display for this message <a href='kmail:showHTML'>by clicking here</a>."
msgid "<b>Note:</b> This HTML message may contain external references to images etc. For security/privacy reasons external references are not loaded. If you trust the sender of this message then you can load the external references for this message <a href='kmail:loadExternal'>by clicking here</a>."
msgid "This email contains a link which reads as '%1' in the text, but actually points to '%2'. This is often the case in scam emails to mislead the recipient"
msgstr ""
#. +> trunk5 stable5
#: scamdetection/scamdetectionwebengine.cpp:146
#, kde-format
msgid "This email contains a link which points to a numerical IP address (%1) instead of a typical textual website address. This is often the case in scam emails."
msgstr ""
#. +> trunk5 stable5
#: scamdetection/scamdetectionwebengine.cpp:151
#, kde-format
msgid "This email contains a link which points to a hexadecimal IP address (%1) instead of a typical textual website address. This is often the case in scam emails."
msgstr ""
#. +> trunk5 stable5
#: scamdetection/scamdetectionwebengine.cpp:156
#, kde-format
msgid "This email contains a link (%1) which has a redirection"
msgstr ""
#. +> trunk5 stable5
#: scamdetection/scamdetectionwebengine.cpp:163
#, kde-format
msgid "This email contains a link (%1) which contains multiple http://. This is often the case in scam emails."
msgstr ""
#. +> trunk5 stable5
#: scamdetection/scamdetectionwebengine.cpp:173
#, kde-format
msgid "This email contains a shorturl (%1). It can redirect to another server."
msgstr ""
#. +> trunk5 stable5
#: scamdetection/scamdetectionwebengine.cpp:181
#, kde-format
msgid "Message contains form element. This is often the case in scam emails."
msgstr ""
#. +> trunk5 stable5
#: scamdetection/scamexpandurljob.cpp:68
#, kde-format
msgid "No network connection detected, we cannot expand url."
msgstr ""
#. +> trunk5 stable5
#: scamdetection/scamexpandurljob.cpp:102
#, kde-format
msgid "Short url '%1' redirects to '%2'."
msgstr ""
#. i18n: ectx: label, entry (PrintSelectedText), group (Print)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:11
#, kde-format
msgid "Only print selected text in viewer"
msgstr ""
#. i18n: ectx: label, entry (RespectExpandCollapseSettings), group (Print)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:15
#, kde-format
msgid "Respect expand/collapse quote mark which is defined in settings during printing."
msgstr ""
#. i18n: ectx: label, entry (PrintBackgroundColorImages), group (Print)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:19
#, kde-format
msgid "Specifies whether the background color and images are also drawn when the page is printed."
msgstr ""
#. i18n: ectx: label, entry (MinimumFontSize), group (Fonts)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:30
#, kde-format
msgid "When we render html do not use font size inferior to minimum size."
msgstr ""
#. i18n: ectx: label, entry (BodyFont), group (Fonts)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:34
#, kde-format
msgid "Specifies the font to use for the message body"
msgstr ""
#. i18n: ectx: label, entry (PrintFont), group (Fonts)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:38
#, kde-format
msgid "Specifies the font to use for printing"
msgstr ""
#. i18n: ectx: label, entry (CloseAfterReplyOrForward), group (Reader)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:50
#, kde-format
msgid "Close message window after replying or forwarding"
msgstr ""
#. i18n: ectx: label, entry (showColorBar), group (Reader)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:63
#, kde-format
msgid "Show HTML Side Bar"
msgstr ""
#. i18n: ectx: label, entry (ShowExpandQuotesMark), group (Reader)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:67
#, kde-format
msgid "Show expand/collapse quote marks"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShowExpandQuotesMark), group (Reader)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:68
#, kde-format
msgid "Enable this option to show different levels of quoted text. Disable to hide the levels of quoted text."
msgstr ""
#. i18n: ectx: label, entry (CollapseQuoteLevelSpin), group (Reader)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:71
#, kde-format
msgid "Automatic collapse level:"
msgstr ""
#. i18n: ectx: label, entry (ShrinkQuotes), group (Reader)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:78
#, kde-format
msgid "Reduce font size for quoted text"
msgstr ""
#. i18n: ectx: whatsthis, entry (ShrinkQuotes), group (Reader)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:79
#, kde-format
msgid "Enable this option to show quoted text with a smaller font."
msgstr ""
#. i18n: ectx: label, entry (AllowAttachmentEditing), group (Reader)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:83
#, kde-format
msgid "Allow to edit attachments of existing mails."
msgstr ""
#. i18n: ectx: label, entry (AlwaysDecrypt), group (Reader)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:87
#, kde-format
msgid "Always decrypt messages when viewing or ask before decrypting"
msgstr ""
#. i18n: ectx: label, entry (MimeTreeMode2), group (Reader)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:90
#, kde-format
msgid "Message Structure Viewer"
msgstr ""
#. i18n: ectx: label, entry (MimeTreeMode2), group (Reader)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:93
#, kde-format
msgid "Show never"
msgstr ""
#. i18n: ectx: label, entry (MimeTreeMode2), group (Reader)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:96
#, kde-format
msgid "Show always"
msgstr ""
#. i18n: ectx: label, entry (headerPluginStyleName), group (Reader)
#. i18n: ectx: label, entry (headerStyle), group (Reader)
#. i18n: ectx: label, entry (headerSetDisplayed), group (Reader)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:118
#, kde-format
msgid "How much of headers should be displayed"
msgstr ""
#. i18n: ectx: label, entry (htmlMail), group (Reader)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:122
#, kde-format
msgid "Prefer HTML to plain text"
msgstr ""
#. i18n: ectx: label, entry (htmlLoadExternal), group (Reader)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:126
#, kde-format
msgid "Allow messages to load external references from the Internet"
msgstr ""
#. i18n: ectx: label, entry (attachmentStrategy), group (Reader)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:130
#, kde-format
msgid "How attachments are shown"
msgstr ""
#. i18n: ectx: label, entry (RecycleQuoteColors), group (Reader)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:134
#, kde-format
msgid "Specifies whether to reuse the quote color, beyond the 3rd level"
msgstr ""
#. i18n: ectx: label, entry (AccessKeyEnabled), group (Reader)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:138
#, kde-format
msgid "Activate Access Key"
msgstr ""
#. i18n: ectx: label, entry (ScamDetectionEnabled), group (Reader)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:142
#, kde-format
msgid "KMail can analyze messages for suspected email scams by looking for common techniques used to deceive you"
msgstr ""
#. i18n: ectx: label, entry (ScamDetectionWhiteList), group (Reader)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:146
#, kde-format
msgid "List of emails in scam white list"
msgstr ""
#. i18n: ectx: label, entry (notSendWhenEncrypted), group (MDN)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:152
#, kde-format
msgid "Do not send MDNs in response to encrypted messages"
msgstr ""
#. i18n: ectx: label, entry (DefaultPolicy), group (MDN)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:156
#, kde-format
msgid "Specifies the default policy to use, for the Message Disposition Notifications (for internal use only)"
msgstr ""
#. i18n: ectx: label, entry (QuoteMessage), group (MDN)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:160
#, kde-format
msgid "Specifies the default quoting action to take, when replying to a message (for internal use only)"
msgstr ""
#. i18n: ectx: label, entry (LegacyMangleFromToHeaders), group (Invitations)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:176
#, kde-format
msgid "Mangle From:/To: headers in replies to replies"
msgstr ""
#. i18n: ectx: whatsthis, entry (LegacyMangleFromToHeaders), group (Invitations)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:177
#, kde-format
msgid "Microsoft Outlook has a number of shortcomings in its implementation of the iCalendar standard; this option works around one of them. If you have problems with Outlook users not being able to get your replies, try setting this option."
msgstr ""
#. i18n: ectx: label, entry (LegacyBodyInvites), group (Invitations)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:182
#, kde-format
msgid "Send groupware invitations in the mail body"
msgstr ""
#. i18n: ectx: whatsthis, entry (LegacyBodyInvites), group (Invitations)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:183
#, kde-format
msgid "Microsoft Outlook has a number of shortcomings in its implementation of the iCalendar standard; this option works around one of them. If you have problems with Outlook users not being able to get your invitations, try setting this option."
msgstr ""
#. i18n: ectx: label, entry (ExchangeCompatibleInvitations), group (Invitations)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:188
#, kde-format
msgid "Exchange-compatible invitation naming"
msgstr ""
#. i18n: ectx: whatsthis, entry (ExchangeCompatibleInvitations), group (Invitations)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:189
#, kde-format
msgid "Microsoft Outlook, when used in combination with a Microsoft Exchange server, has a problem understanding standards-compliant groupware email. Turn this option on to send groupware invitations in a way that Microsoft Exchange understands."
msgstr ""
#. i18n: ectx: label, entry (AutomaticSending), group (Invitations)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:194
#, kde-format
msgid "Automatic invitation sending"
msgstr ""
#. i18n: ectx: whatsthis, entry (AutomaticSending), group (Invitations)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:195
#, kde-format
msgid "When this is checked, you will not see the mail composer window. Instead, all invitation mails are sent automatically. If you want to see the mail before sending it, you can uncheck this option. However, be aware that the text in the composer window is in iCalendar syntax, and you should not try modifying it by hand."
msgstr ""
#. i18n: ectx: label, entry (DeleteInvitationEmailsAfterSendingReply), group (Invitations)
msgid "Delete invitation emails after the reply to them has been sent"
msgstr ""
#. i18n: ectx: whatsthis, entry (DeleteInvitationEmailsAfterSendingReply), group (Invitations)
#. +> trunk5 stable5
#: settings/messageviewer.kcfg.cmake:201
#, kde-format
msgid "When this is checked, received invitation emails that have been replied to will be moved to the Trash folder, once the reply has been successfully sent."
msgstr ""
#. i18n: ectx: label, entry (UseFixedFont), group (Composer)
msgid "This web site is a malware, do you want to continue to show it?"
msgstr ""
#. +> trunk5 stable5
#: viewer/viewer_p.cpp:2083
#, kde-format
msgid "Malware"
msgstr ""
#. +> trunk5 stable5
#: viewer/viewer_p.cpp:2138
#, kde-format
msgid "Copy Email Address"
msgstr ""
#. +> trunk5 stable5
#: viewer/viewer_p.cpp:2232
#, kde-format
msgid "Message as Plain Text"
msgstr ""
#. +> trunk5 stable5
#: viewer/viewer_p.cpp:2431
#, kde-format
msgid "Print Document"
msgstr ""
#. +> trunk5 stable5
#: viewer/viewer_p.cpp:2517
#, kde-format
msgid "Attachments:"
msgstr ""
#. +> trunk5 stable5
#: viewer/viewer_p.cpp:2874
#, kde-format
msgid "URL copied to clipboard."
msgstr ""
#. +> trunk5 stable5
#: viewer/viewer_p.cpp:3060
#, kde-format
msgid "Message loading failed: %1."
msgstr ""
#. +> trunk5 stable5
#: viewer/viewer_p.cpp:3065
#, kde-format
msgid "Message not found."
msgstr ""
#. +> trunk5 stable5
#: widgets/attachmentdialog.cpp:37
#, kde-kuit-format
msgctxt "@info"
msgid ""
"Open attachment <filename>%1</filename>?<nl/>"
"Note that opening an attachment may compromise your system's security."
msgstr ""
#. +> trunk5 stable5
#: widgets/attachmentdialog.cpp:43
#, kde-format
msgid "Open Attachment?"
msgstr ""
#. +> trunk5 stable5
#: widgets/attachmentdialog.cpp:54
#, kde-format
msgid "&Open With '%1'"
msgstr ""
#. +> trunk5 stable5
#: widgets/attachmentdialog.cpp:63
#, kde-format
msgid "&Open With..."
msgstr ""
#. +> trunk5 stable5
#: widgets/attachmentdialog.cpp:85
#, kde-format
msgid "Do not ask again"
msgstr ""
#. +> trunk5 stable5
-#: widgets/htmlstatusbar.cpp:128
+#: widgets/htmlstatusbar.cpp:129
#, kde-format
msgctxt "'HTML Message' with html linebreaks between each letter and in bold text."
msgid ""
"<qt><b><br />"
"H<br />"
"T<br />"
"M<br />"
"L<br />"
" <br />"
"M<br />"
"e<br />"
"s<br />"
"s<br />"
"a<br />"
"g<br />"
"e</b></qt>"
msgstr ""
#. +> trunk5 stable5
-#: widgets/htmlstatusbar.cpp:132
+#: widgets/htmlstatusbar.cpp:133
#, kde-format
msgctxt "'No HTML Message' with html linebreaks between each letter."
msgid ""
"<qt><br />"
"N<br />"
"o<br />"
" <br />"
"H<br />"
"T<br />"
"M<br />"
"L<br />"
" <br />"
"M<br />"
"e<br />"
"s<br />"
"s<br />"
"a<br />"
"g<br />"
"e</qt>"
msgstr ""
#. +> trunk5 stable5
-#: widgets/htmlstatusbar.cpp:137
+#: widgets/htmlstatusbar.cpp:138
#, kde-format
msgctxt "'Plain Message' with html linebreaks between each letter."
msgid ""
"<qt><br />"
"P<br />"
"l<br />"
"a<br />"
"i<br />"
"n<br />"
" <br />"
"M<br />"
"e<br />"
"s<br />"
"s<br />"
"a<br />"
"g<br />"
"e<br />"
"</qt>"
msgstr ""
#. +> trunk5 stable5
-#: widgets/htmlstatusbar.cpp:141
+#: widgets/htmlstatusbar.cpp:142
#, kde-format
msgctxt "'Calendar Message' with html linebreaks between each letter."
msgid ""
"<qt><br />"
"C<br />"
"a<br />"
"l<br />"
"e<br />"
"n<br />"
"d<br />"
"a<br />"
"r<br />"
" <br />"
"M<br />"
"e<br />"
"s<br />"
"s<br />"
"a<br />"
"g<br />"
"e<br />"
"</qt>"
msgstr ""
#. +> trunk5 stable5
-#: widgets/htmlstatusbar.cpp:155
+#: widgets/htmlstatusbar.cpp:156
#, kde-format
msgid "Click to toggle between HTML, plain text and calendar."
msgstr ""
#. +> trunk5 stable5
#: widgets/invitationsettings.cpp:108
#, kde-format
msgid ""
"<qt>Invitations are normally sent as attachments to a mail. This switch changes the invitation mails to be sent in the text of the mail instead; this is necessary to send invitations and replies to Microsoft Outlook.<br />"
"But, when you do this, you no longer get descriptive text that mail programs can read; so, to people who have email programs that do not understand the invitations, the resulting messages look very odd.<br />"
"People that have email programs that do understand invitations will still be able to work with this.</qt>"
msgstr ""
#. +> trunk5 stable5
#: widgets/mailsourcewebengineviewer.cpp:64
#, kde-format
msgctxt "Unchanged mail message"
msgid "Raw Source"
msgstr ""
#. +> trunk5 stable5
#: widgets/mailsourcewebengineviewer.cpp:67
#, kde-format
msgid "Raw, unmodified mail as it is stored on the filesystem or on the server"
msgstr ""
#. +> trunk5 stable5
#: widgets/mailsourcewebengineviewer.cpp:70
#, kde-format
msgctxt "Mail message as shown, in HTML format"
msgid "HTML Source"
msgstr ""
#. +> trunk5 stable5
#: widgets/mailsourcewebengineviewer.cpp:71
#, kde-format
msgid "HTML code for displaying the message to the user"
msgstr ""
#. +> trunk5
#: widgets/mailtrackingwarningwidget.cpp:33
#, kde-format
msgid "Some Mail Tracker was found and was blocked.<a href=\"mailtrackingdetails\">(Details...)"
msgstr ""
#. +> trunk5
#: widgets/mailtrackingwarningwidget.cpp:60
#, kde-format
msgid "1 tracker from the company %2 (%3)"
msgid_plural "%1 trackers from the company %2 (%3)"
msgstr[0] ""
msgstr[1] ""
#. +> trunk5 stable5
#: widgets/openattachmentfolderwidget.cpp:48
#, kde-format
msgid "Open folder where attachment was saved"
msgstr ""
#. +> trunk5 stable5
#: widgets/submittedformwarningwidget.cpp:34
#, kde-format
msgid "Submit form is not allowed in mailer. Please open url in a browser."