diff --git a/kasten/controllers/view/viewstatus/viewstatuscontroller.cpp b/kasten/controllers/view/viewstatus/viewstatuscontroller.cpp
index d727e16e..17810fcd 100644
--- a/kasten/controllers/view/viewstatus/viewstatuscontroller.cpp
+++ b/kasten/controllers/view/viewstatus/viewstatuscontroller.cpp
@@ -1,263 +1,263 @@
 /*
     This file is part of the Okteta Kasten module, made within the KDE community.
 
     Copyright 2008-2009,2012 Friedrich W. H. Kossebau <kossebau@kde.org>
 
     This library is free software; you can redistribute it and/or
     modify it under the terms of the GNU Lesser General Public
     License as published by the Free Software Foundation; either
     version 2.1 of the License, or (at your option) version 3, or any
     later version accepted by the membership of KDE e.V. (or its
     successor approved by the membership of KDE e.V.), which shall
     act as a proxy defined in Section 6 of version 3 of the license.
 
     This library is distributed in the hope that it will be useful,
     but WITHOUT ANY WARRANTY; without even the implied warranty of
     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
     Lesser General Public License for more details.
 
     You should have received a copy of the GNU Lesser General Public
     License along with this library. If not, see <http://www.gnu.org/licenses/>.
 */
 
 #include "viewstatuscontroller.h"
 
 // lib
 #include <kasten/okteta/bytearrayview.h>
 // Kasten ui
 #include <kasten/togglebutton.h>
 #include <kasten/statusbar.h>
 // Okteta core
 #include <okteta/charcodec.h>
 #include <okteta/oktetacore.h>
 // KF5
 #include <KSqueezedTextLabel>
 #include <KComboBox>
 #include <KLocalizedString>
 // Qt
 #include <QLayout>
 #include <QLabel>
 #include <QFontMetrics>
 
 // TODO: make status bar capable to hide entries if size is too small, use priorisation
 
 namespace Kasten {
 
 ViewStatusController::ViewStatusController(StatusBar* statusBar)
     : mStatusBar(statusBar)
 {
     mPrintFunction = Okteta::OffsetFormat::printFunction(Okteta::OffsetFormat::Hexadecimal);
 
     mOffsetLabel = new QLabel(statusBar);
     statusBar->addWidget(mOffsetLabel);
 
     mSelectionLabel = new QLabel(statusBar);
     statusBar->addWidget(mSelectionLabel);
 
     const QString insertModeText = i18nc("@info:status short for: Insert mode",    "INS");
     const QString overwriteModeText = i18nc("@info:status short for: Overwrite mode", "OVR");
     const QString insertModeTooltip = i18nc("@info:tooltip", "Insert mode");
     const QString overwriteModeTooltip = i18nc("@info:tooltip", "Overwrite mode");
     mOverwriteModeToggleButton = new ToggleButton(insertModeText, insertModeTooltip, statusBar);
     mOverwriteModeToggleButton->setCheckedState(overwriteModeText, overwriteModeTooltip);
     statusBar->addWidget(mOverwriteModeToggleButton);
     connect(mOverwriteModeToggleButton, &ToggleButton::clicked, this, &ViewStatusController::setOverwriteMode);
 
     mValueCodingComboBox = new KComboBox(statusBar);
     const QStringList list {
         i18nc("@item:inmenu encoding of the bytes as values in the hexadecimal format", "Hexadecimal"),
         i18nc("@item:inmenu encoding of the bytes as values in the decimal format",     "Decimal"),
         i18nc("@item:inmenu encoding of the bytes as values in the octal format",       "Octal"),
         i18nc("@item:inmenu encoding of the bytes as values in the binary format",      "Binary"),
     };
     mValueCodingComboBox->addItems(list);
     mValueCodingComboBox->setToolTip(
         i18nc("@info:tooltip", "Coding of the value interpretation in the current view."));
     connect(mValueCodingComboBox, QOverload<int>::of(&KComboBox::activated),
             this, &ViewStatusController::setValueCoding);
     statusBar->addWidget(mValueCodingComboBox);
 
     mCharCodingComboBox = new KComboBox(statusBar);
     mCharCodingComboBox->addItems(Okteta::CharCodec::codecNames());
     mCharCodingComboBox->setToolTip(
         i18nc("@info:tooltip", "Encoding in the character column of the current view."));
     connect(mCharCodingComboBox, QOverload<int>::of(&KComboBox::activated),
             this, &ViewStatusController::setCharCoding);
     statusBar->addWidget(mCharCodingComboBox);
 
-    fixWidths(0);
+    fixWidths(Okteta::OffsetFormat::Hexadecimal);
 
     setTargetModel(nullptr);
 }
 
 // the letter C can be very wide, that is why with proportinal fonts there seems too much space used, but isn't
 // see http://frinring.wordpress.com/2008/10/14/better-width-with-open-sources/
 void ViewStatusController::fixWidths(int offsetCoding)
 {
     const QFontMetrics metrics = mStatusBar->fontMetrics();
 
     // mOffsetLabel
     static const int hexDigitsCount = 16;
     static const int decimalDigitsCount = 10;
     static const int firstLetterIndex = 10;
     static const char digits[hexDigitsCount] = {
         '0', '1', '2', '3', '4', '5', '6', '7', '8', '9',
         'A', 'B', 'C', 'D', 'E', 'F'
     };
 
     int largestOffsetWidth = 0;
     int largestSelectionWidth = 0;
     int widestDigitIndex = 0;
-    const int digitsCount = (offsetCoding == 0) ? hexDigitsCount : decimalDigitsCount;
+    const int digitsCount = (offsetCoding == Okteta::OffsetFormat::Hexadecimal) ? hexDigitsCount : decimalDigitsCount;
     for (int i = 0; i < digitsCount; ++i) {
         QString offset;
-        if (offsetCoding == 0) {
+        if (offsetCoding == Okteta::OffsetFormat::Hexadecimal) {
             offset = QString(9, QLatin1Char(digits[i]));
             offset[4] = QLatin1Char(':');
         } else {
             offset = QString(10, QLatin1Char(digits[i]));
         }
 
         const QString offsetText = i18n("Offset: %1", offset);
         const int offsetWidth = metrics.boundingRect(offsetText).width();
         if (largestOffsetWidth < offsetWidth) {
             largestOffsetWidth = offsetWidth;
         }
 
         const char countDigit = (i < firstLetterIndex) ? digits[i] : digits[widestDigitIndex];
         const int maxNumber = QByteArray('1' + QByteArray(9, countDigit)).toInt();
         const QString bytesCount = i18n("%1 bytes", maxNumber);
         const QString selectionString = i18nc("@info:status selection: start offset - end offset ()",
                                               "Selection: %1 - %2 (%3)", offset, offset, bytesCount);
 
         const int selectionWidth = metrics.boundingRect(selectionString).width();
         if (largestSelectionWidth < selectionWidth) {
             if (i < firstLetterIndex) {
                 widestDigitIndex = i;
             }
             largestSelectionWidth = selectionWidth;
         }
     }
 
     mOffsetLabel->setFixedWidth(largestOffsetWidth);
     mSelectionLabel->setFixedWidth(largestSelectionWidth);
     mStatusBar->updateLayout();
 }
 
 void ViewStatusController::setTargetModel(AbstractModel* model)
 {
     if (mByteArrayView) {
         mByteArrayView->disconnect(this);
         mByteArrayView->disconnect(mOverwriteModeToggleButton);
     }
 
     mByteArrayView = model ? model->findBaseModel<ByteArrayView*>() : nullptr;
 
     const bool hasView = (mByteArrayView != nullptr);
     if (hasView) {
         mStartOffset = mByteArrayView->startOffset();
 
         onCursorPositionChanged(mByteArrayView->cursorPosition());
         onSelectedDataChanged(mByteArrayView->modelSelection());
         mOverwriteModeToggleButton->setChecked(mByteArrayView->isOverwriteMode());
         onOffsetCodingChanged(mByteArrayView->offsetCoding());
         onValueCodingChanged(mByteArrayView->valueCoding());
         onCharCodecChanged(mByteArrayView->charCodingName());
 
         connect(mByteArrayView, &ByteArrayView::cursorPositionChanged, this, &ViewStatusController::onCursorPositionChanged);
         connect(mByteArrayView, &ByteArrayView::selectedDataChanged,
                 this, &ViewStatusController::onSelectedDataChanged);
         connect(mByteArrayView, &ByteArrayView::overwriteModeChanged,
                 mOverwriteModeToggleButton, &ToggleButton::setChecked);
         connect(mByteArrayView, &ByteArrayView::offsetCodingChanged, this, &ViewStatusController::onOffsetCodingChanged);
         connect(mByteArrayView, &ByteArrayView::valueCodingChanged, this, &ViewStatusController::onValueCodingChanged);
         connect(mByteArrayView, &ByteArrayView::charCodecChanged,
                 this, &ViewStatusController::onCharCodecChanged);
     } else {
         mOffsetLabel->setText(i18nc("@info:status offset value not available", "Offset: -"));
         mSelectionLabel->setText(i18nc("@info:status offset value not available", "Selection: -"));
         mOverwriteModeToggleButton->setChecked(false);
         mValueCodingComboBox->setCurrentIndex(0);
         mCharCodingComboBox->setCurrentIndex(0);
     }
 
     mOffsetLabel->setEnabled(hasView);
     mSelectionLabel->setEnabled(hasView);
     mOverwriteModeToggleButton->setEnabled(hasView);
     mValueCodingComboBox->setEnabled(hasView);
     mCharCodingComboBox->setEnabled(hasView);
 }
 
 void ViewStatusController::setOverwriteMode(bool overwrite)
 {
     mByteArrayView->setOverwriteMode(overwrite);
 }
 
 void ViewStatusController::setValueCoding(int valueCoding)
 {
     mByteArrayView->setValueCoding(valueCoding);
     mByteArrayView->setFocus();
 }
 
 void ViewStatusController::setCharCoding(int charCoding)
 {
     mByteArrayView->setCharCoding(Okteta::CharCodec::codecNames()[charCoding]);
     mByteArrayView->setFocus();
 }
 
 void ViewStatusController::onCursorPositionChanged(Okteta::Address offset)
 {
     char codedOffset[Okteta::OffsetFormat::MaxFormatWidth + 1];
 
     mPrintFunction(codedOffset, mStartOffset + offset);
 
     mOffsetLabel->setText(i18n("Offset: %1", QString::fromUtf8(codedOffset)));
 }
 
 // TODO: fix selection by cursor not sending updates
 void ViewStatusController::onSelectedDataChanged(const Kasten::AbstractModelSelection* modelSelection)
 {
     const ByteArraySelection* byteArraySelection = static_cast<const ByteArraySelection*>(modelSelection);
     const Okteta::AddressRange selection = byteArraySelection->range();
 
     QString selectionString;
     if (!selection.isEmpty()) {
         char codedSelectionStart[Okteta::OffsetFormat::MaxFormatWidth + 1];
         char codedSelectionEnd[Okteta::OffsetFormat::MaxFormatWidth + 1];
 
         mPrintFunction(codedSelectionStart, mStartOffset + selection.start());
         mPrintFunction(codedSelectionEnd,   mStartOffset + selection.end());
 
         const QString bytesCount = i18np("1 byte", "%1 bytes", selection.width());
         selectionString = i18nc("@info:status selection: start offset - end offset (number of bytes)",
                                 "Selection: %1 - %2 (%3)", QString::fromUtf8(codedSelectionStart), QString::fromUtf8(codedSelectionEnd), bytesCount);
     } else {
         selectionString = i18nc("@info:status offset value not available", "Selection: -");
     }
 
     mSelectionLabel->setText(selectionString);
 }
 
 void ViewStatusController::onOffsetCodingChanged(int offsetCoding)
 {
     mPrintFunction = Okteta::OffsetFormat::printFunction((Okteta::OffsetFormat::Format)offsetCoding);
     fixWidths(offsetCoding);
 
     // trigger updates of offset printing labels
     onCursorPositionChanged(mByteArrayView->cursorPosition());
     onSelectedDataChanged(mByteArrayView->modelSelection());
 }
 
 void ViewStatusController::onValueCodingChanged(int valueCoding)
 {
     mValueCodingComboBox->setCurrentIndex(valueCoding);
 }
 
 void ViewStatusController::onCharCodecChanged(const QString& charCodecName)
 {
     const int charCodingIndex = Okteta::CharCodec::codecNames().indexOf(charCodecName);
 
     mCharCodingComboBox->setCurrentIndex(charCodingIndex);
 }
 
 }