diff --git a/doc/katepart/configuring.docbook b/doc/katepart/configuring.docbook
index dbc33bfd4..5f6c4877f 100644
--- a/doc/katepart/configuring.docbook
+++ b/doc/katepart/configuring.docbook
@@ -1,1565 +1,1562 @@
Configure &kappname;
Selecting SettingsConfigure
Application... from the menu brings up the
Configure dialog box. This dialog can be
used to alter a number of different settings. The settings available
for change vary according to which category the user chooses from a
vertical list on the left side of the dialog. By means of three buttons
along the bottom of the box the user can control the process.
You may invoke the Help system, accept the
current settings and close the dialog by means of the
OK button, or Cancel the
process. The categories Appearance,
Fonts & Colors, Editing,
Open/Save and
Extensions are detailed below.
The Editor Component ConfigurationThis group contains all pages related to the editor component of
&kappname;. Most of the settings here are defaults, they can be overridden by
defining a filetype,
by Document Variables or
by changing them per document during an editing session.AppearanceGeneralDynamic Word WrapIf this option is checked, the text lines
will be wrapped at the view border on the screen.Dynamic word wrap indicators (if applicable)Choose when the Dynamic word wrap indicators
should be displayed, either Off, Follow Line
Numbers or Always on.
Align dynamically wrapped lines
to indentation depth:
Enables the start of dynamically wrapped
lines to be aligned vertically to the indentation level of the first
line. This can help to make code and markup more
readable.Additionally, this allows you to
set a maximum width of the screen, as a percentage,
after which dynamically wrapped lines will no longer be vertically aligned.
For example, at 50%, lines whose indentation levels are deeper than 50% of the
width of the screen will not have vertical alignment applied to subsequent
wrapped lines.Whitespace HighlightingHighlight tabulatorsThe editor will display a » symbol to indicate the presence
of a tab in the text.Highlight trailing spacesThe editor will display dots to indicate the presence of extra
whitespace at the end of lines.Advanced
Show indentation lines
If this is checked, the editor will display
vertical lines to help identifying indent lines.Highlight range between selected brackets
If this is enabled, the range between the selected matching brackets will be highlighted.Animate bracket matching
If enabled, moving on the brackets ({, [,
], },( or )) will
quickly animate the matching bracket.Fold first line
If enabled, the first line is folded, if possible. This is useful,
if the file starts with a comment, such as a copyrightBordersBordersShow folding markers
If this option is checked, the current view will display marks
for code folding, if code folding is available.
+Show preview of folded code
+
+If checked, hovering over a folded region shows a preview of the folded text
+in a popup.
+
+Show icon border
If this is checked, you will see an icon border on the left
hand side. The icon border shows bookmark signs for instance.Show line numbers
If this is checked, you will see line numbers on the left
hand side.Show line modification markers
If this is checked, line modification markers will be visible.
For more information, see .
Show scrollbar marks
If this option is checked the current view
will show marks on the vertical scrollbar. These marks will
for instance show bookmarks.
+Show text preview on scrollbar
+If this option is checked, and you hover the scrollbar with the mouse cursor
+a small text preview with several lines of the current document around the cursor position will be displayed.
+This allows you to quickly switch to another part of the document.
+
+
+Show scrollbar mini-mapIf this option is checked, every new view will show a mini map of the
document on the vertical scrollbar.For more information on the scrollbar minimap, see
Minimap WidthAdjusts the width of the scrollbar mini-map, defined in pixels.
+
+Scrollbars visibility
+Switch the scrollbar on, off or show the scroolbar only when needed.
+Click with the &LMB; on the blue rectangle to display the line numer range of the docmument displayed on the screen.
+Keep the &LMB; pressed outside the blue rectangle to automatically scroll through the document
+
+Sort Bookmarks Menu
By creation
Each new bookmark will be added to the bottom,
independently from where it is placed in the document.By position
The bookmarks will be ordered by the line
numbers they are placed at.Fonts & ColorsThis section of the dialog lets you configure all fonts and colors in
any color scheme you have, as well creating new schemes or deleting existing
ones. Each scheme has settings for colors, fonts and normal and highlight text
styles.
&kappname; will preselect the currently active scheme for you, if you want to
work on a different scheme start by selecting that from the
Schema combobox. With the New and Delete
button you can create a new scheme or delete existing ones.At the bottom of the page you can select the Default schema for &kappname;.By default, &kappname; will base its color scheme on the current &kde;
color scheme. You can reset an individual color back to default by clicking the
reset arrow to the right of the entry in the color editor, or you can reset all
colors back to default by clicking the
Use &kde; Color Scheme at the bottom of the panel.You can adjust the &kde; color scheme in the
Colors module in
&systemsettings;.ColorsEditor Background ColorsText AreaThis is the default background for the editor area, it will be
the dominant color on the editor area.Selected TextThis is the background for selected text. The default is
the global selection color, as set in your &kde; color preferences.
Current LineSet the color for the current line. Setting this a bit different
from the Normal text background helps to keep focus on the current line.
Search HighlightSet the color for the text that matches your last search.
Replace HighlightSet the color for the text that matches your last replace
operation.Icon BorderBackground AreaThis color is used for the marks, line numbers and folding
marker borders in the left side of the editor view when they are displayed.
Line NumbersThis color is used to draw the line numbers on the left side of
the view when displayed.Word Wrap MarkerThis color is used to draw a pattern to the left of dynamically
wrapped lines when those are aligned vertically, as well as for the static word
wrap marker.Code FoldingThis color is used to highlight the section of code that would
be folded when you click on the code folding arrow to the left of a document.
For more information, see
the code
folding documentation.Modified LinesThis color is used to highlight to the left of a document lines
that have been modified but not yet saved. For more information, see
Saved LinesThis color is used to highlight to the left of a document lines
that have been modified this session and saved. For more information, see
Text DecorationsSpelling Mistake LineThis color is used to indicate spelling mistakes.Tab and Space MarkersThis color is used to draw white space indicators, when they are
enabled.Indentation LineThis color is used to draw a line to the left of indented blocks,
if that feature is enabled.Bracket HighlightThis color is used to draw the background of matching brackets.
Marker ColorsBookmarkThis color is used to indicate bookmarks. For more information,
see .Active BreakpointThis color is used by the GDB plugin to indicate an active
breakpoint. For more information, see
the GDB Plugin
documentation.Reached BreakpointThis color is used by the GDB plugin to indicate a breakpoint
you have reached while debugging. For more information, see
the GDB Plugin
documentation.Disabled BreakpointThis color is used by the GDB plugin to indicate an inactive
breakpoint. For more information, see
the GDB Plugin
documentation.ExecutionThis color is used by the GDB plugin the line presently being
executed. For more information, see
the GDB Plugin
documentation.WarningThis color is used by the build plugin to indicate a line that
has caused a compiler warning. For more information, see
the Build Plugin
documentation.ErrorThis color is used by the build plugin to indicate a line that
has caused a compiler error. For more information, see
the Build Plugin
documentation.Text Templates & SnippetsBackgroundThis color is used by the &kate; Snippets plugin to mark the
background of a snippet. Editable PlaceholderThis color is used by the &kate; Snippets plugin to mark a
placeholder that you can click in to edit manually. Focused Editable PlaceholderThis color is used by the &kate; Snippets plugin to mark the
placeholder that you are presently editing. Not Editable PlaceholderThis color is used by the &kate; Snippets plugin to mark a
placeholder that cannot be edited manually, such as one that is automatically
populated. For more information, see
the &kate; Snippets
documentation.Use &kde; Color SchemeClicking this button will set all the above defined colors to match the
current color scheme defined in &kde;'s &systemsettings;. For more information,
see the documentation for the Colors &kde;
Control Module.If you do not use the &kde; &plasma; Workspaces, this button will have no
effect, and may not be present.Font
Here you can choose the font for the schema. You can choose from
any font available on your system, and set a default size. A sample text
displays at the bottom of the dialog, so you can see the effect of your choices.
For more information about selecting a font, see the
Choosing Fonts
section of the &kde; Fundamentals documentation.Default Text StylesThe default text styles are inherited by the highlight text styles,
allowing the editor to present text in a very consistent way, for example comment
text is using the same style in almost all of the text formats that &kappname; can
highlight.The name in the list of styles is using the style configured for
the item, providing you with an immediate preview when configuring a style.
Each style lets you select common attributes as well as foreground
and background colors. To unset a background color, right-click to use the
context menu.Highlighting Text StylesHere you can edit the text styles used by a specific highlight definition.
The editor preselects the highlight used by your current document. To work on a
different highlight, select one in the Highlight combobox
above the style list.
The name in the list of styles is using the style configured for
the item, providing you with an immediate preview when configuring a style.
Each style lets you select common attributes as well as foreground
and background colors. To unset a background color, right-click to use the
context menu. In addition you can see if a style is equal to the default style
used for the item, and set it to that if not.You will notice that many highlights contain other highlights represented
by groups in the style list. For example most highlights import the Alert
highlight, and many source code formats imports the Doxygen highlight. Editing
colors in those groups only affects the styles when used in the edited highlight
format.
EditingGeneralStatic Word Wrap
Word wrap is a feature that causes the editor to automatically start a new line
of text and move (wrap) the cursor to the beginning of that new line. &kappname;
will automatically start a new line of text when the current line reaches the
length specified by the Wrap Words
At: option.Enable static word wrapTurns static word wrap on or off.Show static word wrap marker
(if applicable)If this option is checked, a vertical line will be drawn at the word wrap
column as defined in the SettingsConfigure Editor... in the Editing tab.
Please note that the word wrap marker is only drawn if you use a fixed pitch
font.Wrap words at:If the Enable static word wrap option is selected
this entry determines the length (in characters) at which the editor will
automatically start a new line.Input Mode
The selected input mode will be enabled when opening a new view.
You can still toggle the vi input mode on/off for a particular view in the
Edit menu.
Auto bracketsWhen
the user types a left bracket ([, (, or {)
&kappname; automatically enters the right bracket (}, ),
or ]) to the right of the cursor.When text is selected, typing one of the characters wraps the selected text.Copy and PasteCopy/Cut the current line if no selectionIf this option is enabled and the text selection is empty, copy and cut
action are performed for the line of text at the actual cursor position.Text NavigationText Cursor MovementSmart home and smart endWhen selected, pressing the home key will cause the cursor to
skip white space and go to the start of a line's text.PageUp/PageDown moves cursorThis option changes the behavior of the cursor when the user presses
the Page Up or Page Down key. If unselected
the text cursor will maintain its relative position within the visible text in
&kappname; as new text becomes visible as a result of the operation. So if the
cursor is in the middle of the visible text when the operation occurs it will
remain there (except when one reaches the beginning or end.) With this option
selected, the first key press will cause the cursor to move to either the top or
bottom of the visible text as a new page of text is displayed.Autocenter cursor:Sets the number of lines to maintain visible above and below the cursor
when possible.Text Selection ModeNormalSelections will be overwritten by typed text and will be lost on
cursor movement.PersistentSelections will stay even after cursor movement and typing.Allow scrolling past the end of the documentThis option lets you scroll past the end of the document. This can be used to vertically centre the bottom of the document, or put it on top of the current view.IndentationDefault indentation mode:Select the automatic indentation mode you want to use as default. It is
strongly recommended to use None or
Normal here, and use filetype configurations to set other
indentation modes for text formats like C/C++ code or &XML;.Indent usingTabulatorsWhen this is enabled the editor will insert tabulator characters when you
press the 	 key or use automatic
indentation.SpacesWhen this is enabled the editor will insert a calculated number of spaces
according to the position in the text and the setting
when you press the 	 key or use automatic
indentation.Tabulators and SpacesWhen this is enabled, the editor will insert spaces as describe above when
indenting or pressing 	 at the beginning of a line, but insert tabulators when
the 	 key is pressed in the middle or end of a line.Tab width:This configures the number of spaces that are displayed in place of a tabulator
character.Indentation width:The indentation width is the number of spaces which is used to indent a line.
If configured to indent using tabulators, a tabulator character is inserted
if the indentation is divisible by the tab width.Indentation PropertiesKeep extra spacesIf this option is disabled, changing the indentation
level aligns a line to a multiple of the width specified in
Indentation width.Adjust indentation of text pasted from the clipboardIf this option is selected, text pasted from the clipboard is indented.
Triggering the Undo action removes the indentation.Indentation ActionsBackspace key in leading blank space unindentsIf this option is selected, the &Backspace; key decreases the indentation level
if the cursor is located in the leading blank space of a line.Tab key action (if no selection exists)
If you want 	 to align the current line in the current code block
like in emacs, make 	 a shortcut to the action Align.
Always advance to the next tab positionIf this option is selected, the 	 key always inserts white space
so that the next tab position is reached. If the option Insert spaces instead of tabulators
on the General tab in the Editing
page is enabled, spaces are inserted; otherwise, a single tabulator is inserted.Always increase indentation levelIf this option is selected, the 	 key always indents the current
line by the number of character positions specified in Indentation width.Increase indentation level if in leading blank spaceIf this option is selected, the 	 key either indents the current line
or advances to the next tab position. If the insertion point is at or before the
first non-space character in the line, or if there is a selection, the current line
is indented by the number of character positions specified in Indentation width.
If the insertion point is located after the first non-space character in the line
and there is no selection, white space is inserted so that the next tab position is
reached: if the option Insert spaces instead of tabulators
on the General tab in the Editing
page is enabled, spaces are inserted; otherwise, a single tabulator is inserted.Auto CompletionGeneralEnable auto completionIf enabled, a word completion box automatically pops up during typing
showing a list of text entries to complete the current text under the
cursor.Minimal word length to completeWhile typing text, the word completion searches for words in the
document starting with the already typed text. This option configures the minimal
amount of characters that are needed to make the word completion active and pop
up a completion box.Remove tail on completeRemove the tail of a previous word when the completion item is chosen from a list.
Keyword completion
If enabled, the built-in autocompletion uses the keywords defined by the syntax highlighting.
SpellcheckThese configuration options are described in the documentation for the
&systemsettings; module Spell Checker.Vi Input ModeGeneralLet Vi commands override Kate shortcutsWhen selected, Vi commands will override &kappname;'s built-in commands. For
example: &Ctrl;R will redo,
and override the standard action (showing the search and replace dialog).Display relative line numbers
if this is enabled, the current line always refers to line 0.
Lines above and below increase the line number relatively.Key Mapping
Key mapping is used to change the meaning of typed keys. This allows you to
move commands to other keys or make special keypresses for doing a series of
commands.Example:F2 -> I-- &Esc;This will prepend I-- to a line when pressing F2.
Open/SaveGeneralFile FormatEncodingThis defines the standard encoding to use to open/save files, if not changed
in the open/save dialog or by using a command line option.Encoding DetectionSelect an item from the drop down box, either to disable autodetection or
use Universal to enable autodetection for all encodings. But as
this may probably only detect utf-8/utf-16, selecting a region will use custom heuristics
for better results.
If neither the encoding chosen as standard above, nor the encoding specified
in the open/save dialog, nor the encoding specified on command line match
the content of the file, this detection will be run.Fallback EncodingThis defines the fallback encoding to try for opening files if neither the
encoding chosen as standard above, nor the encoding specified in the open/
save dialog, nor the encoding specified on command line match the content of
the file. Before this is used, an attempt will be made to determine the
encoding to use by looking for a byte order mark at start of file: if one
is found, the right unicode encoding will be chosen; otherwise encoding
detection will run, if both fail fallback encoding will be tried.End of lineChoose your preferred end of line mode for your active
document. You have the choice between &UNIX;, DOS/&Windows; or Macintosh.Automatic end of line detectionCheck this if you want the editor to autodetect the end of line
type. The first found end of line type will be used for the whole file.Enable byte order mark (BOM)The byte order mark is a special sequence at the beginning of unicode
encoded documents. It helps editors to open text documents with the correct
unicode encoding. For more information see Byte Order Mark.Line Length LimitUnfortunately, due to deficiencies in &Qt;, &kappname; experiences poor
performance when working with extremely long lines. For that reason, &kappname;
will automatically wrap lines when they are longer than the number of characters
specified here. To disable this, set this to 0.Automatic Cleanups on SaveRemove trailing spacesThe editor will automatically eliminate extra spaces at the ends of lines
of text while saving the file. You can select Never to
disable this functionality, On Modified Lines to do so
only on lines that you have modified since you last saved the document, or
In Entire Document to remove them unconditionally from the
entire document.Append newline at end of file on saveThe editor will automatically append a newline to the end of the file if
one is not already present upon saving the file.AdvancedBackup on SaveBacking up on save will cause &kappname; to copy the disk file to
<prefix><filename><suffix> before saving changes.
The suffix defaults to ~ and prefix is empty by
default. Local filesCheck this if you want backups of local files when
saving.Remote filesCheck this if you want backups of remote files when saving.PrefixEnter the prefix to prepend to the backup file names.SuffixEnter the suffix to add to the backup file names.Swap file options&kappname; is able to recover (most of) what was written after last save in case
of a crash or power failure. A swap file (.swp.<filename>) is created
after the first editing action on a document. If the user doesn’t save the
changes and &kappname; crashes, the swap file remains on the disk. When opening a
file, &kappname; checks if there is a swap file for the document and if it is, it asks
the user whether he wants to recover the lost data or not. The user has the
possibility to view the differences between the original file and the recovered
one, too. The swap file is deleted after every save and on normal exit.&kappname; syncs the swap files on the disk every 15 seconds, but only if they
have changed since the last sync. The user can disable the swap files syncing if
he wants, by selecting Disable,
but this can lead to more data loss.When enabled, the swap files are saved in the same folder as the file.
When Alternative Folder is chosen, swap files are created in the specified folder.
This is useful for network file systems to avoid unnecessary network traffic.Modes & FiletypesThis page allows you to override the default configuration for documents
of specified mimetypes. When the editor loads a document, it will try if it
matches the file masks or mimetypes for one of the defined filetypes, and if so
apply the variables defined. If more filetypes match, the one with the highest
priority will be used.
Filetype:The filetype with the highest priority is the one displayed in
the first drop down box. If more filetypes were found, they are
also listed.NewThis is used to create a new filetype. After
you click on this button, the fields below get empty and you
can fill the properties you want for the new filetype.DeleteTo remove an existing filetype, select it from the drop down
box and press the Delete button.Properties of current filetypeThe filetype with the highest priority is the one displayed in
the first drop down box. If more filetypes were found, they are also
listed.Name:The name of the filetype will be the text of the corresponding
menu item. This name is displayed in the
ToolsFiletypesSection:The section name is used to organize the file types in
menus. This is also used in the
ToolsFiletypes menu.Variables:This string allows you to configure &kappname;'s settings for the
files selected by this mimetype using &kappname; variables. You can set almost any
configuration option, such as highlight, indent-mode,
etc.Press Edit to see a list of all available variables
and their descriptions. Select the checkbox on the left to enable a particular
variable and then set the value of the variable on the right. Some variables
provide a drop-down box to select possible values from while others require you
to enter a valid value manually.For complete information on these variables, see
Configuring with Document
Variables.Highlighting:If you create a new file type, this drop down box allows you to
select a filetype for highlighting.Indentation Mode:The drop down box specifies the indentation mode for new
documents.File extensions:The wildcards mask allows you to select files by filename. A
typical mask uses an asterisk and the file extension, for example
*.txt; *.text. The string is a semicolon-separated list of
masks.MIME types:Displays a wizard that helps you easily select
mimetypes.Priority:Sets a priority for this file type. If more than one file type
selects the same file, the one with the highest priority will be
used.Download Highlighting Files...
Click this button to download new or updated syntax highlight descriptions
from the &kappname; website.
Configuring With Document Variables&kappname; variables is katepart's implementation of document variables, similar
to &Emacs; and vi modelines. In katepart, the lines have the following format:
kate: VARIABLENAME VALUE; [ VARIABLENAME VALUE; ... ]
The lines can of course be in a comment, if the file is in a format with comments.
Variable names are single words (no whitespace), and anything up to the next
semicolon is the value. The semicolon is required.Here is an example variable line, forcing indentation settings for a C++,
java or javascript file:
// kate: replace-tabs on; indent-width 4; indent-mode cstyle;Only the first and last 10 lines are searched for variable lines.Additionally, document variables can be placed in a file called
.kateconfig in any directory, and the configured settings will
be applied as if the modelines were entered on every file in the directory and its
subdirectories, as far down as the
configured search depth.
Document variables in .kateconfig use the same syntax as
in modelines.There are variables to support almost all configurations in katepart, and
additionally plugins can use variables, in which case it should be documented in
the plugin's documentation.How &kappname; uses VariablesWhen reading configuration, katepart looks in the following places
(in that order):
The global configuration.Optional session data.The "Filetype" configuration.Document variables in .kateconfig.Document variables in the document itself.Settings made during editing from menu or command line.
As you can see, document variables are only overridden by changes made at runtime.
Whenever a document is saved, the document variables are reread, and will
overwrite changes made using menu items or the command line.Any variable not listed below is stored in the document and can be queried
by other objects such as plugins, which can use them for their own purpose.
For example, the variable indent mode uses document variables for its
configuration.
-The variables listed here documents &kappname; version 3.7. More variables
+The variables listed here documents &kappname; version 5.38. More variables
may be added in the future. There are 3 possible types of values for variables,
with the following valid expressions:
BOOL - on|off|true|false|1|0INTEGER - any integer numberSTRING - anything elseAvailable Variables
+
+auto-bracketsBOOL
+Enable automatic insertion of brackets.
+
+
auto-center-linesINTSet the number of autocenter lines.
-
-auto-insert-doxygenBOOL
-Turn insertion of the leading asterisk in doxygen comments on or
-off. This has no effect unless you use the C-style auto-indenter.
-
-
background-colorSTRINGSet the document background color. The value must be something
that can be evaluated to a valid color, for example #ff0000.
backspace-indentsBOOLEnable or disable unindenting when &Backspace; is pressed.block-selectionBOOLTurn block selection
on or off.
-bom | byte-order-markBOOL
+bom | byte-order-mark | byte-order-markerBOOLEnable/disable the byte order mark (BOM) when saving files in Unicode format
(utf8, utf16, utf32).Since: &kate; 3.4 (&kde; 4.4)
-
-encodingSTRING
-Set the encoding used for loading or saving the file.
-As the variables in the document will be read after loading, this impacts only the saving.
-If you place it in a .kateconfig file, it will have an effect for the loading, too.
-Since: &kate; 3.10 (&kde; 4.10)
-
-
bracket-highlight-colorSTRINGSet the color for the bracket highlight. The value must be
something that can be evaluated to a valid color, for example #ff0000.
current-line-colorSTRINGSet the color for the current line. The value must be
something that can be evaluated to a valid color, for example #ff0000.
default-dictionarySTRINGSets the default dictionary used for spellchecking.Since: &kate; 3.4 (&kde; 4.4)dynamic-word-wrapBOOLTurns dynamic word wrap on or
off.eol | end-of-lineSTRINGSet the end of line mode. Valid settings are
unix, mac and dos.folding-markersBOOLSet the display of
folding markers
on or off.
+
+folding-previewBOOL
+Enable folding preview in the editor border.
+
+
font-sizeINTSet the point size of the document font.fontSTRINGSet the font of the document. The value should be a valid font
name, for example courier.hl | syntaxSTRINGSet the syntax highlighting. Valid strings are all the names available
in the menus. For instance, for C++ simply write C++.icon-bar-colorSTRINGSet the icon bar color. The value must be something that can
be evaluated to a valid color, for example #ff0000.icon-borderBOOLSet the display of the icon border on or off.indent-modeSTRINGSet the auto-indentation mode. The options none,
normal, cstyle, haskell,
lilypond, lisp, python,
ruby and xml are recognized. See the section
for details.indent-pasted-textBOOLEnable/disable adjusting indentation of text pasted from the clipboard.Since: &kate; 3.11 (&kde; 4.11)indent-widthINTSet the indentation width.keep-extra-spacesBOOLSet whether to keep extra spaces when calculating indentation width.line-numbersBOOLSet the display of line numbers on or off.
-
-mixed-indentBOOL
-Set mixed indentation, as with &Emacs;, on or off.
-Note: Deprecated since &kate; 3 in &kde;4. This variable is ignored, set replace-tabs on; instead for the future.
-
-
newline-at-eofBOOLAdd an empty line at the end of the file (EOF) when saving the document.Since: &kate; 3.9 (&kde; 4.9)overwrite-modeBOOLSet overwrite mode on or off.persistent-selectionBOOLSet persistent selection
on or off.
-
-remove-trailing-spaceBOOL
-Set dynamic end of line cleanup on or off.
-Note: Deprecated since &kde; 4.10. Please use
-remove-trailing-spaces with the desired choice instead.
-
+
+replace-tabs-saveBOOL
+Set tab to space conversion on save on or off.
+
+
+
+replace-tabsBOOL
+Set dynamic tab to space conversion on or off.remove-trailing-spacesSTRINGRemoves trailing spaces when saving the document. Valid options are:none, - or 0: never remove trailing spaces.modified, mod, + or 1: remove trailing spaces only in
modified lines. The modified lines are marked by the line modification system.all, * or 2: remove trailing spaces in the entire document.
-Since: &kde; 4.10. This deprecates the options remove-trailing-space and replace-trailing-space-save.
+Since: &kde; 4.10.
-
-replace-tabs-saveBOOL
-Set tab to space conversion on save on or off.
+
+scrollbar-minimapBOOL
+Show scrollbar minimap.
-
-replace-tabsBOOL
-Set dynamic tab to space conversion on or off.
-
-
-
-replace-trailing-space-saveBOOL
-Set end of line cleanup on save on or off.
-Note: Deprecated since &kde; 4.10. Please use
-remove-trailing-spaces with the desired choice instead.
-
+
+scrollbar-previewBOOL
+Show scrollbar preview.schemeSTRINGSet the color scheme. The string must be the name of a color
scheme that exists in your configuration to have any effect.selection-colorSTRINGSet the selection color. The value must be something that can
be evaluated to a valid color, for example #ff0000.show-tabsBOOLSet the visual tab character on or off.smart-homeBOOLSet smart home navigation
on or off.
-
-space-indentBOOL
-Set indentation with spaces on or off.
-Note: Deprecated since &kate; 3 in &kde;4. Mixed indentation is the default behavior.
-Set replace-tabs on; to achieve space-only indentation.
-
-
tab-indentsBOOLSet 	 key indentation on or off.tab-widthINTSet the tab character display width.undo-stepsINTSet the number of undo steps to remember.Note: Deprecated since &kate; 3 in &kde;4. This variable is ignored. The maximal count of undo steps is unlimited.word-wrap-columnINTSet the static word wrap
width. word-wrap-marker-colorSTRINGSet the word wrap marker color. The value must be something
that can be evaluated to a valid color, for example #ff0000.word-wrapBOOLSet static word wrapping on or off.
diff --git a/doc/katepart/development.docbook b/doc/katepart/development.docbook
index 90b1216bb..669be3e85 100644
--- a/doc/katepart/development.docbook
+++ b/doc/katepart/development.docbook
@@ -1,2844 +1,2844 @@
&TC.Hollingsworth; &TC.Hollingsworth.mail;Extending &katepart;IntroductionLike any advanced text editor component, &katepart; offers a variety of
ways to extend its functionality. You can write
simple scripts to add functionality with JavaScript.
Finally, once you have extended &katepart;, you are
welcome to join us
and share your enhancements with the world!Working with Syntax HighlightingOverviewSyntax Highlighting is what makes the editor automatically
display text in different styles/colors, depending on the function of
the string in relation to the purpose of the file. In program source
code for example, control statements may be rendered bold, while data
types and comments get different colors from the rest of the
text. This greatly enhances the readability of the text, and thus
helps the author to be more efficient and productive.A Perl function, rendered with syntax
highlighting.
A Perl function, rendered with syntax highlighting.
The same Perl function, without
highlighting.
The same Perl function, without highlighting.
Of the two examples, which is easiest to read?&kappname; comes with a flexible, configurable and capable system
for doing syntax highlighting, and the standard distribution provides
definitions for a wide range of programming, scripting and markup
languages and other text file formats. In addition you can
provide your own definitions in simple &XML; files.&kappname; will automatically detect the right syntax rules when you
open a file, based on the &MIME; Type of the file, determined by its
extension, or, if it has none, the contents. Should you experience a
bad choice, you can manually set the syntax to use from the
ToolsHighlighting
menu.The styles and colors used by each syntax highlight definition
can be configured using the Highlighting Text Styles tab of the
Config Dialog, while the &MIME; Types and
file extensions it should be used for are handled by the Modes & Filetypes
tab.Syntax highlighting is there to enhance the readability of
correct text, but you cannot trust it to validate your text. Marking
text for syntax is difficult depending on the format you are using,
and in some cases the authors of the syntax rules will be proud if 98%
of text gets correctly rendered, though most often you need a rare
style to see the incorrect 2%.You can download updated or additional syntax highlight
definitions from the &kappname; website by clicking the
Download Highlighting Files... button in the Modes & Filetypes tab of the Config Dialog.The &kappname; Syntax Highlight SystemThis section will discuss the &kappname; syntax highlighting
mechanism in more detail. It is for you if you want to know about
it, or if you want to change or create syntax definitions.How it WorksWhenever you open a file, one of the first things the &kappname;
editor does is detect which syntax definition to use for the
file. While reading the text of the file, and while you type away in
it, the syntax highlighting system will analyze the text using the
rules defined by the syntax definition and mark in it where different
contexts and styles begin and end.When you type in the document, the new text is analyzed and marked on the
fly, so that if you delete a character that is marked as the beginning or end
of a context, the style of surrounding text changes accordingly.The syntax definitions used by the &kappname; Syntax Highlighting System are
&XML; files, containing
Rules for detecting the role of text, organized into context blocksKeyword listsStyle Item definitionsWhen analyzing the text, the detection rules are evaluated in
the order in which they are defined, and if the beginning of the
current string matches a rule, the related context is used. The start
point in the text is moved to the final point at which that rule
matched and a new loop of the rules begins, starting in the context
set by the matched rule.RulesThe detection rules are the heart of the highlighting detection
system. A rule is a string, character or regular expression against which
to match the text being analyzed. It contains information about which
style to use for the matching part of the text. It may switch the
working context of the system either to an explicitly mentioned
context or to the previous context used by the text.Rules are organized in context groups. A context group is used
for main text concepts within the format, for example quoted text
strings or comment blocks in program source code. This ensures that
the highlighting system does not need to loop through all rules when
it is not necessary, and that some character sequences in the text can
be treated differently depending on the current context.
Contexts may be generated dynamically to allow the usage of instance
specific data in rules.Context Styles and KeywordsIn some programming languages, integer numbers are treated
differently from floating point ones by the compiler (the program that
converts the source code to a binary executable), and there may be
characters having a special meaning within a quoted string. In such
cases, it makes sense to render them differently from the surroundings
so that they are easy to identify while reading the text. So even if
they do not represent special contexts, they may be seen as such by
the syntax highlighting system, so that they can be marked for
different rendering.A syntax definition may contain as many styles as required to
cover the concepts of the format it is used for.In many formats, there are lists of words that represent a
specific concept. For example, in programming languages, control
statements are one concept, data type names another, and built in
functions of the language a third. The &kappname; Syntax Highlighting
System can use such lists to detect and mark words in the text to
emphasize concepts of the text formats.Default StylesIf you open a C++ source file, a &Java; source file and an
HTML document in &kappname;, you will see that even
though the formats are different, and thus different words are chosen
for special treatment, the colors used are the same. This is because
&kappname; has a predefined list of Default Styles which are employed by
the individual syntax definitions.This makes it easy to recognize similar concepts in different
text formats. For example, comments are present in almost any
programming, scripting or markup language, and when they are rendered
using the same style in all languages, you do not have to stop and
think to identify them within the text.All styles in a syntax definition use one of the default
styles. A few syntax definitions use more styles than there are
defaults, so if you use a format often, it may be worth launching the
configuration dialog to see if some concepts use the same
style. For example, there is only one default style for strings, but as
the Perl programming language operates with two types of strings, you
can enhance the highlighting by configuring those to be slightly
different. All available default styles
will be explained later.The Highlight Definition &XML; FormatOverview&kappname; uses the Syntax-Highlighting framework from &kde-frameworks;.
The default highlighting xml files shipped with &kappname; are compiled
into the Syntax-Highlighting library by default.
This section is an overview of the Highlight Definition &XML;
format. Based on a small example it will describe the main components
and their meaning and usage. The next section will go into detail with
the highlight detection rules.The formal definition, also known as the XSD you
find in Syntax
Highlighting repository in the file language.xsdCustom .xml highlight definition files are
located in org.kde.syntax-highlighting/syntax/ in
your user folder found with qtpaths which usually is
$HOME/.localOn &Windows; these files are located %USERPROFILE%/AppData/Local/org.kde.syntax-highlighting/syntax.
%USERPROFILE% usually expands to C:\\Users\\user.Main sections of &kappname; Highlight Definition filesA highlighting file contains a header that sets the XML version:
<?xml version="1.0" encoding="UTF-8"?>
The root of the definition file is the element language.
Available attributes are:Required attributes:name sets the name of the language. It appears in the menus and dialogs afterwards.section specifies the category.extensions defines file extensions, such as "*.cpp;*.h"version specifies the current revision of the definition file in terms of an integer number. Whenever you change a highlighting definition file, make sure to increase this number.kateversion specifies the latest supported &kappname; version.Optional attributes:mimetype associates files &MIME; type.casesensitive defines, whether the keywords are case sensitive or not.priority is necessary if another highlight definition file uses the same extensions. The higher priority will win.author contains the name of the author and his email-address.
-license contains the license, usually LGPL, Artistic, GPL or others.
+license contains the license, usually the MIT license for new syntax-highlighting files.style contains the provided language and is used by the indenters for the attribute required-syntax-style.hidden defines whether the name should appear in &kappname;'s menus.So the next line may look like this:
<language name="C++" version="1" kateversion="2.4" section="Sources" extensions="*.cpp;*.h" />
Next comes the highlighting element, which
contains the optional element list and the required
elements contexts and itemDatas.list elements contain a list of keywords. In
this case the keywords are class and const.
You can add as many lists as you need.The contexts element contains all contexts.
The first context is by default the start of the highlighting. There are
two rules in the context Normal Text, which match
the list of keywords with the name somename and a
rule that detects a quote and switches the context to string.
To learn more about rules read the next chapter.The third part is the itemDatas element. It
contains all color and font styles needed by the contexts and rules.
In this example, the itemDataNormal Text,
String and Keyword are used.
<highlighting>
<list name="somename">
<item> class </item>
<item> const </item>
</list>
<contexts>
<context attribute="Normal Text" lineEndContext="#pop" name="Normal Text" >
<keyword attribute="Keyword" context="#stay" String="somename" />
<DetectChar attribute="String" context="string" char=""" />
</context>
<context attribute="String" lineEndContext="#stay" name="string" >
<DetectChar attribute="String" context="#pop" char=""" />
</context>
</contexts>
<itemDatas>
<itemData name="Normal Text" defStyleNum="dsNormal" />
<itemData name="Keyword" defStyleNum="dsKeyword" />
<itemData name="String" defStyleNum="dsString" />
</itemDatas>
</highlighting>
The last part of a highlight definition is the optional
general section. It may contain information
about keywords, code folding, comments and indentation.The comment section defines with what
string a single line comment is introduced. You also can define a
multiline comment using multiLine with the
additional attribute end. This is used if the
user presses the corresponding shortcut for comment/uncomment.The keywords section defines whether
keyword lists are case sensitive or not. Other attributes will be
explained later.
<general>
<comments>
<comment name="singleLine" start="#"/>
</comments>
<keywords casesensitive="1"/>
</general>
</language>
The Sections in DetailThis part will describe all available attributes for contexts,
itemDatas, keywords, comments, code folding and indentation.The element context belongs in the group
contexts. A context itself defines context specific
rules such as what should happen if the highlight system reaches the end of a
line. Available attributes are:name states the context name. Rules will use this name
to specify the context to switch to if the rule matches.lineEndContext defines the context the highlight
system switches to if it reaches the end of a line. This may either be a name
of another context, #stay to not switch the context
(⪚. do nothing) or #pop which will cause it to leave this
context. It is possible to use for example #pop#pop#pop
to pop three times, or even #pop#pop!OtherContext to pop
two times and switch to the context named OtherContext.lineEmptyContext defines the context if an empty
line is encountered. Default: #stay.fallthrough defines if the highlight system switches
to the context specified in fallthroughContext if no rule matches.
Default: false.fallthroughContext specifies the next context
if no rule matches.dynamic if true, the context
remembers strings/placeholders saved by dynamic rules. This is needed for HERE
documents for example. Default: false.The element itemData is in the group
itemDatas. It defines the font style and colors.
So it is possible to define your own styles and colors. However, we
recommend you stick to the default styles if possible so that the user
will always see the same colors used in different languages. Though,
sometimes there is no other way and it is necessary to change color
and font attributes. The attributes name and defStyleNum are required,
the others are optional. Available attributes are:name sets the name of the itemData.
Contexts and rules will use this name in their attribute
attribute to reference an itemData.defStyleNum defines which default style to use.
Available default styles are explained in detail later.color defines a color. Valid formats are
'#rrggbb' or '#rgb'.selColor defines the selection color.italic if true, the text will be italic.bold if true, the text will be bold.underline if true, the text will be underlined.strikeout if true, the text will be struck out.spellChecking if true, the text will be spellchecked.The element keywords in the group
general defines keyword properties. Available attributes are:casesensitive may be true
or false. If true, all keywords
are matched case sensitively.weakDeliminator is a list of characters that
do not act as word delimiters. For example, the dot '.'
is a word delimiter. Assume a keyword in a list contains
a dot, it will only match if you specify the dot as a weak delimiter.additionalDeliminator defines additional delimiters.wordWrapDeliminator defines characters after which a
line wrap may occur.Default delimiters and word wrap delimiters are the characters
.():!+,-<=>%&*/;?[]^{|}~\, space (' ')
and tabulator ('\t').The element comment in the group
comments defines comment properties which are used
for ToolsComment and
ToolsUncomment.
Available attributes are:name is either singleLine
or multiLine. If you choose multiLine
the attributes end and region are
required.start defines the string used to start a comment.
In C++ this would be "/*".end defines the string used to close a comment.
In C++ this would be "*/".region should be the name of the foldable
multiline comment. Assume you have beginRegion="Comment"
... endRegion="Comment" in your rules, you should use
region="Comment". This way uncomment works even if you
do not select all the text of the multiline comment. The cursor only must be
in the multiline comment.The element folding in the group
general defines code folding properties.
Available attributes are:indentationsensitive if true, the code folding markers
will be added indentation based, as in the scripting language Python. Usually you
do not need to set it, as it defaults to false.The element indentation in the group
general defines which indenter will be used. However, we strongly
recommend you omit this element, as the indenter usually will be set by either defining
a File Type or by adding a mode line to the text file. If you specify an indenter though,
you will force a specific indentation on the user, which he might not like at all.
Available attributes are:mode is the name of the indenter. Available indenters
right now are: normal, cstyle, haskell, lilypond, lisp, python, ruby
and xml.Available Default StylesDefault Styles were already explained,
as a short summary: Default styles are predefined font and color styles.General default styles:dsNormal, when no special highlighting is required.dsKeyword, built-in language keywords.dsFunction, function calls and definitions.dsVariable, if applicable: variable names (e.g. $someVar in PHP/Perl).dsControlFlow, control flow keywords like if, else, switch, break, return, yield, ...dsOperator, operators like + - * / :: < >dsBuiltIn, built-in functions, classes, and objects.dsExtension, common extensions, such as Qt classes and functions/macros in C++ and Python.dsPreprocessor, preprocessor statements or macro definitions.dsAttribute, annotations such as @override and __declspec(...).String-related default styles:dsChar, single characters, such as 'x'.dsSpecialChar, chars with special meaning in strings such as escapes, substitutions, or regex operators.dsString, strings like "hello world".dsVerbatimString, verbatim or raw strings like 'raw \backlash' in Perl, CoffeeScript, and shells, as well as r'\raw' in Python.dsSpecialString, SQL, regexes, HERE docs, LaTeX math mode, ...dsImport, import, include, require of modules.Number-related default styles:dsDataType, built-in data types like int, void, u64.dsDecVal, decimal values.dsBaseN, values with a base other than 10.dsFloat, floating point values.dsConstant, built-in and user defined constants like PI.Comment and documentation-related default styles:dsComment, comments.dsDocumentation, /** Documentation comments */ or """docstrings""".dsAnnotation, documentation commands like @param, @brief.dsCommentVar, the variable names used in above commands, like "foobar" in @param foobar.dsRegionMarker, region markers like //BEGIN, //END in comments.Other default styles:dsInformation, notes and tips like @note in doxygen.dsWarning, warnings like @warning in doxygen.dsAlert, special words like TODO, FIXME, XXXX.dsError, error highlighting and wrong syntax.dsOthers, when nothing else fits.Highlight Detection RulesThis section describes the syntax detection rules.Each rule can match zero or more characters at the beginning of
the string they are tested against. If the rule matches, the matching
characters are assigned the style or attribute
defined by the rule, and a rule may ask that the current context is
switched.A rule looks like this:<RuleName attribute="(identifier)" context="(identifier)" [rule specific attributes] />The attribute identifies the style to use
for matched characters by name, and the context
identifies the context to use from here.The context can be identified by:An identifier, which is the name of the other
context.An order telling the engine to stay in the
current context (#stay), or to pop back to a
previous context used in the string (#pop).To go back more steps, the #pop keyword can be repeated:
#pop#pop#popAn order followed by an exclamation mark
(!) and an identifier, which
will make the engine first follow the order and then switch to the
other context, e.g. #pop#pop!OtherContext.Some rules can have child rules which are
then evaluated only if the parent rule matched. The entire matched
string will be given the attribute defined by the parent rule. A rule
with child rules looks like this:
<RuleName (attributes)>
<ChildRuleName (attributes) />
...
</RuleName>
Rule specific attributes varies and are described in the
following sections.Common attributesAll rules have the following attributes in common and are
available whenever (common attributes) appears.
attribute and context
are required attributes, all others are optional.
attribute: An attribute maps to a defined itemData.context: Specify the context to which the highlighting system switches if the rule matches.beginRegion: Start a code folding block. Default: unset.endRegion: Close a code folding block. Default: unset.lookAhead: If true, the
highlighting system will not process the matches length.
Default: false.firstNonSpace: Match only, if the string is
the first non-whitespace in the line. Default: false.column: Match only, if the column matches. Default: unset.Dynamic rulesSome rules allow the optional attribute dynamic
of type boolean that defaults to false. If dynamic is
true, a rule can use placeholders representing the text
matched by a regular expression rule that switched to the
current context in its string or
char attributes. In a string,
the placeholder %N (where N is a number) will be
replaced with the corresponding capture N
from the calling regular expression. In a
char the placeholder must be a number
N and it will be replaced with the first character of
the corresponding capture N from the calling regular
expression. Whenever a rule allows this attribute it will contain a
(dynamic).dynamic: may be (true|false).The Rules in DetailDetectCharDetect a single specific character. Commonly used for example to
find the ends of quoted strings.<DetectChar char="(character)" (common attributes) (dynamic) />The char attribute defines the character
to match.Detect2CharsDetect two specific characters in a defined order.<Detect2Chars char="(character)" char1="(character)" (common attributes) (dynamic) />The char attribute defines the first character to match,
char1 the second.AnyCharDetect one character of a set of specified characters.<AnyChar String="(string)" (common attributes) />The String attribute defines the set of
characters.StringDetectDetect an exact string.<StringDetect String="(string)" [insensitive="true|false"] (common attributes) (dynamic) />The String attribute defines the string
to match. The insensitive attribute defaults to
false and is passed to the string comparison
function. If the value is true insensitive
comparing is used.WordDetectDetect an exact string but additionally require word boundaries
such as a dot '.' or a whitespace on the beginning
and the end of the word. Think of \b<string>\b
in terms of a regular expression, but it is faster than the rule RegExpr.<WordDetect String="(string)" [insensitive="true|false"] (common attributes) (dynamic) />The String attribute defines the string
to match. The insensitive attribute defaults to
false and is passed to the string comparison
function. If the value is true insensitive
comparing is used.Since: Kate 3.5 (KDE 4.5)RegExprMatches against a regular expression.<RegExpr String="(string)" [insensitive="true|false"] [minimal="true|false"] (common attributes) (dynamic) />The String attribute defines the regular
expression.insensitive defaults to
false and is passed to the regular expression
engine.minimal defaults to
false and is passed to the regular expression
engine.Because the rules are always matched against the beginning of
the current string, a regular expression starting with a caret
(^) indicates that the rule should only be
matched against the start of a line.See Regular Expressions
for more information on those.keywordDetect a keyword from a specified list.<keyword String="(list name)" (common attributes) />The String attribute identifies the
keyword list by name. A list with that name must exist.The highlighting system processes keyword rules in a very optimized way.
This makes it an absolute necessity that any keywords to be matched need to be
surrounded by defined delimiters, either implied (the default delimiters),
or explicitly specified within the additionalDeliminator
property of the keywords tag.If a keyword to be matched shall contain a delimiter character, this
respective character must be added to the weakDeliminator
property of the keywords tag. This character will then
loose its delimiter property in all keyword rules.IntDetect an integer number.<Int (common attributes) (dynamic) />This rule has no specific attributes. Child rules are typically
used to detect combinations of L and
U after the number, indicating the integer type
in program code. Actually all rules are allowed as child rules, though,
the DTD only allows the child rule StringDetect.The following example matches integer numbers follows by the character 'L'.
<Int attribute="Decimal" context="#stay" >
<StringDetect attribute="Decimal" context="#stay" String="L" insensitive="true"/>
</Int>
FloatDetect a floating point number.<Float (common attributes) />This rule has no specific attributes. AnyChar is
allowed as a child rule and typically used to detect combinations, see rule
Int for reference.HlCOctDetect an octal point number representation.<HlCOct (common attributes) />This rule has no specific attributes.HlCHexDetect a hexadecimal number representation.<HlCHex (common attributes) />This rule has no specific attributes.HlCStringCharDetect an escaped character.<HlCStringChar (common attributes) />This rule has no specific attributes.It matches literal representations of characters commonly used in
program code, for example \n
(newline) or \t (TAB).The following characters will match if they follow a backslash
(\):
abefnrtv"'?\. Additionally, escaped
hexadecimal numbers such as for example \xff and
escaped octal numbers, for example \033 will
match.HlCCharDetect an C character.<HlCChar (common attributes) />This rule has no specific attributes.It matches C characters enclosed in a tick (Example: 'c').
The ticks may be a simple character or an escaped character.
See HlCStringChar for matched escaped character sequences.RangeDetectDetect a string with defined start and end characters.<RangeDetect char="(character)" char1="(character)" (common attributes) />char defines the character starting the range,
char1 the character ending the range.Useful to detect for example small quoted strings and the like, but
note that since the highlighting engine works on one line at a time, this
will not find strings spanning over a line break.LineContinueMatches a specified char at the end of a line.<LineContinue (common attributes) [char="\"] />char optional character to match, default is
backslash ('\'). New since KDE 4.13.This rule is useful for switching context at end of line. This is needed for
example in C/C++ to continue macros or strings.IncludeRulesInclude rules from another context or language/file.<IncludeRules context="contextlink" [includeAttrib="true|false"] />The context attribute defines which context to include.If it is a simple string it includes all defined rules into the current context, example:
<IncludeRules context="anotherContext" />
If the string contains a ## the highlight system
will look for a context from another language definition with the given name,
for example
<IncludeRules context="String##C++" />
would include the context String from the C++
highlighting definition.If includeAttrib attribute is
true, change the destination attribute to the one of
the source. This is required to make, for example, commenting work, if text
matched by the included context is a different highlight from the host
context.
DetectSpacesDetect whitespaces.<DetectSpaces (common attributes) />This rule has no specific attributes.Use this rule if you know that there can be several whitespaces ahead,
for example in the beginning of indented lines. This rule will skip all
whitespace at once, instead of testing multiple rules and skipping one at a
time due to no match.DetectIdentifierDetect identifier strings (as a regular expression: [a-zA-Z_][a-zA-Z0-9_]*).<DetectIdentifier (common attributes) />This rule has no specific attributes.Use this rule to skip a string of word characters at once, rather than
testing with multiple rules and skipping one at a time due to no match.Tips & TricksOnce you have understood how the context switching works it will be
easy to write highlight definitions. Though you should carefully check what
rule you choose in what situation. Regular expressions are very mighty, but
they are slow compared to the other rules. So you may consider the following
tips.
If you only match two characters use Detect2Chars
instead of StringDetect. The same applies to
DetectChar.Regular expressions are easy to use but often there is another much
faster way to achieve the same result. Consider you only want to match
the character '#' if it is the first character in the
line. A regular expression based solution would look like this:
<RegExpr attribute="Macro" context="macro" String="^\s*#" />
You can achieve the same much faster in using:
<DetectChar attribute="Macro" context="macro" char="#" firstNonSpace="true" />
If you want to match the regular expression '^#' you
can still use DetectChar with the attribute column="0".
The attribute column counts characters, so a tabulator is only one character.
You can switch contexts without processing characters. Assume that you
want to switch context when you meet the string */, but
need to process that string in the next context. The below rule will match, and
the lookAhead attribute will cause the highlighter to
keep the matched string for the next context.
<Detect2Chars attribute="Comment" context="#pop" char="*" char1="/" lookAhead="true" />Use DetectSpaces if you know that many whitespaces occur.Use DetectIdentifier instead of the regular expression '[a-zA-Z_]\w*'.Use default styles whenever you can. This way the user will find a familiar environment.Look into other XML-files to see how other people implement tricky rules.You can validate every XML file by using the command
validatehl.sh language.xsd mySyntax.xml.
The files validatehl.sh and language.xsd
are available in Syntax
Highlighting repository.
If you repeat complex regular expression very often you can use
ENTITIES. Example:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE language SYSTEM "language.dtd"
[
<!ENTITY myref "[A-Za-z_:][\w.:_-]*">
]>
Now you can use &myref; instead of the regular
expression.Scripting with JavaScript
The &kappname; editor component is easily extensible by writing scripts.
The scripting language is ECMAScript (widely known as JavaScript).
&kappname; supports two kinds of scripts: indentation and command line scripts.
Indentation Scripts
Indentation scripts - also referred as indenters - automatically indent the
source code while typing text. As an example, after hitting the return key
the indentation level often increases.
The following sections describe step by step how to create the skeleton for a
simple indenter. As a first step, create a new *.js file
called ⪚ javascript.js in the local home folder
$XDG_DATA_HOME/katepart5/script/indentation.
Therein, the environment variable XDG_DATA_HOME typically expands to
either ~/.local or ~/.local/share.
On &Windows; these files are located in %USER%\AppData\Local\katepart5\indentation.
%USERPROFILE% usually expands to C:\\Users\\user.The Indentation Script Header
The header of the file javascript.js is embedded as JSON at the beginning of the document as follows:
var katescript = {
"name": "JavaScript",
"author": "Example Name <example.name@some.address.org>",
"license": "BSD License",
"revision": 1,
"kate-version": "5.1",
"required-syntax-style": "javascript",
"indent-languages": ["javascript"],
"priority": 0,
}; // kate-script-header, must be at the start of the file without comments
Each entry is explained in detail now:
name [required]: This is the indenter name that appears in the menu
ToolsIndentation
and in the configuration dialog.
author [optional]: The author's name and contact information.
license [optional]: Short form of the license, such as BSD License or LGPLv3.
revision [required]: The revision of the script. This number should be increased whenever the script is modified.
kate-version [required]: Minimum required &kappname; version.
required-syntax-style [optional]: The required syntax style, which matches the specified style in syntax highlighting files. This is important for indenters that rely on specific highlight information in the document. If a required syntax style is specified, the indenter is available only when the appropriate highlighter is active. This prevents undefined behavior caused by using the indenter without the expected highlighting schema. For instance, the Ruby indenter makes use of this in the files ruby.js and ruby.xml.
indent-languages [optional]: JSON array of syntax styles the indenter can indent correctly, ⪚: ["c++", "java"].
priority [optional]: If several indenters are suited for a certain highlighted file, the priority decides which indenter is chosen as default indenter.
The Indenter Source Code
Having specified the header this section explains how the indentation scripting
itself works. The basic skeleton of the body looks like this:
// required katepart js libraries, e.g. range.js if you use Range
require ("range.js");
triggerCharacters = "{}/:;";
function indent(line, indentWidth, ch)
{
// called for each newline (ch == '\n') and all characters specified in
// the global variable triggerCharacters. When calling ToolsAlign
// the variable ch is empty, i.e. ch == ''.
//
// see also: Scripting API
return -2;
}
The function indent() has three parameters:
line: the line that has to be indentedindentWidth: the indentation width in number of spacesch: either a newline character (ch == '\n'), the trigger character specified in triggerCharacters or empty if the user invoked the action ToolsAlign.
The return value of the indent() function specifies how
the line will be indented. If the return value is a simple integer number, it
is interpreted as follows:
return value -2: do nothingreturn value -1: keep indentation (searches for previous non-blank line)return value 0: numbers >= 0 specify the indentation depth in spaces
Alternatively, an array of two elements can be returned:
return [ indent, align ];
In this case, the first element is the indentation depth as above with the
same meaning of the special values. However, the second element is an absolute
value representing a column for alignment. If this value is higher than the
indent value, the difference represents a number of spaces to be added after
the indentation of the first parameter. Otherwise, the second number is ignored.
Using tabs and spaces for indentation is often referred to as mixed mode.
Consider the following example: Assume using tabs to indent, and tab width is set
to 4. Here, <tab> represents a tab and '.' a space:
1: <tab><tab>foobar("hello",
2: <tab><tab>......."world");
When indenting line 2, the indent() function returns [8, 15]. As result, two
tabs are inserted to indent to column 8, and 7 spaces are added to align the
second parameter under the first, so that it stays aligned if the file is viewed
with a different tab width.
A default &kde; installation ships &kappname; with several indenters. The
corresponding JavaScript source code can be found in $XDG_DATA_DIRS/katepart5/script/indentation.On &Windows; these files are located in %USER%\AppData\Local\katepart5\indentation.
%USER% usually expands to C:\\Users\\user.
Developing an indenter requires reloading the scripts to see whether the changes
behave appropriately. Instead of restarting the application, simply switch to
the command line and invoke the command reload-scripts.
If you develop useful scripts please consider contributing to the &kappname; Project
by contacting the mailing list.
Command Line Scripts
As it is hard to satisfy everyone's needs, &kappname; supports little helper tools
for quick text manipulation through the
built-in command line.
For instance, the command
sort is implemented as a script. This section explains how to create
*.js files to extend &kappname; with arbitrary helper scripts.
Command line scripts are located in the same folder as indentation scripts.
So as a first step, create a new *.js file called
myutils.js in the local home folder
$XDG_DATA_HOME/katepart5/script/commands.
Therein, the environment variable XDG_DATA_HOME typically expands to
either ~/.local or ~/.local/share.On &Windows; these files are located in %USER%\AppData\Local\katepart5\commands.
%USER% usually expands to C:\\Users\\user.
The Command Line Script Header
The header of each command line script is embedded in JSON at the beginning of the script as follows:
var katescript = {
"author": "Example Name <example.name@some.address.org>",
"license": "LGPLv2+",
"revision": 1,
"kate-version": "5.1",
"functions": ["sort", "moveLinesDown"],
"actions": [
{ "function": "sort",
"name": "Sort Selected Text",
"category": "Editing",
"interactive": "false"
},
{ "function": "moveLinesDown",
"name": "Move Lines Down",
"category": "Editing",
"shortcut": "Ctrl+Shift+Down",
"interactive": "false"
}
]
}; // kate-script-header, must be at the start of the file without comments
Each entry is explained in detail now:
author [optional]: The author's name and contact information.license [optional]: Short form of the license, such as BSD License or LGPLv2.revision [required]: The revision of the script. This number should be increased whenever the script is modified.kate-version [required]: Minimum required &kappname; version.functions [required]: JSON array of commands in the script.actions [optional]: JSON Array of JSON objects that defines the actions that appear in the application menu. Detailed information is provided in the section Binding Shortcuts.
Since the value of functions is a JSON array, a single script is able to contain an arbitrary number
of command line commands. Each function is available through &kappname;'s
built-in command line.
The Script Source Code
All functions specified in the header have to be implemented in the script.
For instance, the script file from the example above needs to implement the two
functions sort and moveLinesDown.
All functions have the following syntax:
// required katepart js libraries, e.g. range.js if you use Range
require ("range.js");
function <name>(arg1, arg2, ...)
{
// ... implementation, see also: Scripting API
}
Arguments in the command line are passed to the function as
arg1, arg2, etc.
In order to provide documentation for each command, simply implement the
'help' function as follows:
function help(cmd)
{
if (cmd == "sort") {
return i18n("Sort the selected text.");
} else if (cmd == "...") {
// ...
}
}
Executing help sort in the command line then calls this help function with
the argument cmd set to the given command, &ie;
cmd == "sort". &kappname; then presents the returned text as
documentation to the user. Make sure to
translate the strings.
Developing a command line script requires reloading the scripts to see whether
the changes behave appropriately. Instead of restarting the application, simply
switch to the command line and invoke the command reload-scripts.
Binding ShortcutsIn order to make the scripts accessible in the application menu and assign shortcuts, the script needs to provide an appropriate
script header. In the above example, both functions sort and moveLinesDown appear in the menu
due to the following part in the script header:
var katescript = {
...
"actions": [
{ "function": "sort",
"name": "Sort Selected Text",
"icon": "",
"category": "Editing",
"interactive": "false"
},
{ "function": "moveLinesDown",
"name": "Move Lines Down",
"icon": "",
"category": "Editing",
"shortcut": "Ctrl+Shift+Down",
"interactive": "false"
}
]
};
The fields for one action are as follows:
function [required]: The function that should appear in the menu ToolsScripts.name [required]: The text appears in the script menu.icon [optional]: The icon appears next to the text in the menu. All &kde; icon names can be used here.category [optional]: If a category is specified, the script appears in a submenu.shortcut [optional]: The shortcut given here is the default shortcut. Example: Ctrl+Alt+t. See the Qt documentation for further details.interactive [optional]: If the script needs user input in the command line, set this to true.
If you develop useful scripts please consider contributing to the &kappname; Project
by contacting the mailing list.
Scripting API
The scripting API presented here is available to all scripts, &ie; indentation
scripts and command line commands.
The Cursor and Range classes are provided by library files in $XDG_DATA_DIRS/katepart5/libraries.
If you want to use them in your script, which needs to use some of the Document or View functions, please include the necessary library by using:
// required katepart js libraries, e.g. range.js if you use Range
require ("range.js");
To extend the standard scripting API with your own functions and prototypes simply
create a new file in &kde;'s local configuration folder
$XDG_DATA_HOME/katepart5/libraries and include it into your script using:
require ("myscriptnamehere.js");
On &Windows; these files are located in %USER%\AppData\Local\katepart5\libraries.
%USER% usually expands to C:\\Users\\user.
To extend existing prototypes like Cursor or
Range, the recommended way is to
not modify the global *.js files.
Instead, change the Cursor prototype in JavaScript after the cursor.js is included into your
script via require.
Cursors and Ranges
As &kappname; is a text editor, all the scripting API is based on cursors and
ranges whenever possible. A Cursor is a simple (line, column)
tuple representing a text position in the document. A Range spans text from a
starting cursor position to an ending cursor position. The API is explained in
detail in the next sections.
The Cursor Prototype
Cursor();
Constructor. Returns a Cursor at position (0, 0).Example: var cursor = new Cursor();
Cursor(int line, int column);
Constructor. Returns a Cursor at position (line, column).
Example: var cursor = new Cursor(3, 42);
Cursor(Cursor other);
Copy constructor. Returns a copy of the cursor other.
Example: var copy = new Cursor(other);
Cursor Cursor.clone();
Returns a clone of the cursor.Example: var clone = cursor.clone();
Cursor.setPosition(int line, int column);
Sets the cursor position to line and column.
Since: &kde; 4.11
bool Cursor.isValid();
Check whether the cursor is valid. The cursor is invalid, if line and/or
column are set to -1.
Example: var valid = cursor.isValid();
Cursor Cursor.invalid();
Returns a new invalid cursor located at (-1, -1).
Example: var invalidCursor = cursor.invalid();
int Cursor.compareTo(Cursor other);
Compares this cursor to the cursor other. Returns
-1, if this cursor is located before the cursor other,0, if both cursors equal and+1, if this cursor is located after the cursor other.
bool Cursor.equals(Cursor other);
Returns true, if this cursor and the cursor other are
equal, otherwise false.
String Cursor.toString();
Returns the cursor as a string of the form Cursor(line, column).
The Range Prototype
Range();
Constructor. Calling new Range() returns a Range at (0, 0) - (0, 0).
Range(Cursor start, Cursor end);
Constructor. Calling new Range(start, end) returns the Range (start, end).
Range(int startLine, int startColumn, int endLine, int endColumn);
Constructor. Calling new Range(startLine, startColumn, endLine, endColumn)
returns the Range from (startLine, startColumn) to (endLine, endColumn).
Range(Range other);
Copy constructor. Returns a copy of Range other.
Range Range.clone();
Returns a clone of the range.
Example: var clone = range.clone();
bool Range.isEmpty();
Returns true, if the start and end cursors are equal.
Example: var empty = range.isEmpty();
Since: &kde; 4.11
bool Range.isValid();
Returns true, if both start and end cursor are valid, otherwise false.
Example: var valid = range.isValid();
Range Range.invalid();
Returns the Range from (-1, -1) to (-1, -1).
bool Range.contains(Cursor cursor);
Returns true, if this range contains the cursor position, otherwise false.
bool Range.contains(Range other);
Returns true, if this range contains the Range other,
otherwise false.
bool Range.containsColumn(int column);
Returns true, if column is in the half open interval
[start.column, end.column), otherwise false.
bool Range.containsLine(int line);
Returns true, if line is in the half open interval
[start.line, end.line), otherwise false.
bool Range.overlaps(Range other);
Returns true, if this range and the range other share
a common region, otherwise false.
bool Range.overlapsLine(int line);
Returns true, if line is in the interval
[start.line, end.line], otherwise false.
bool Range.overlapsColumn(int column);
Returns true, if column is in the interval
[start.column, end.column], otherwise false.
bool Range.onSingleLine();
Returns true, if the range starts and ends at the same line,
&ie; if Range.start.line == Range.end.line.
Since: &kde; 4.9
bool Range.equals(Range other);
Returns true, if this range and the Range other are
equal, otherwise false.
String Range.toString();
Returns the range as a string of the form Range(Cursor(line, column), Cursor(line, column)).
Global FunctionsThis section lists all global functions.Reading & Including Files
String read(String file);
Will search the given file relative to the katepart/script/files directory and return its content as a string.
void require(String file);
Will search the given file relative to the katepart/script/libraries directory and evaluate it.
require is internally guarded against multiple inclusions of the same file.
Since: &kde; 4.10
Debugging
void debug(String text);
Prints text to stdout in the
console launching the application.
TranslationIn order to support full localization, there are several functions to translate
strings in scripts, namely i18n, i18nc,
i18np and i18ncp. These functions behave
exactly like
&kde;'s translation functions.
The translation functions translate the wrapped strings through &kde;'s
translation system to the language used in the application. Strings in scripts
being developed in the official &kappname; sources are automatically extracted and
translatable. In other words, as a &kappname; developer you do not have to bother with
message extraction and translation. It should be noted though, that the translation
only works inside the &kde; infrastructure, &ie;, new strings in 3rd-party
scripts developed outside of &kde; are not translated.
Therefore, please consider contributing your scripts to &kate; such that
proper translation is possible.
void i18n(String text, arg1, ...);
Translates text into the language used by the application.
The arguments arg1, ..., are optional and used to
replace the placeholders %1, %2, etc.
void i18nc(String context, String text, arg1, ...);
Translates text into the language used by the
application. Additionally, the string context is
visible to translators so they can provide a better translation.
The arguments arg1, ..., are optional and used to
replace the placeholders %1, %2, etc.
void i18np(String singular, String plural, int number, arg1, ...);
Translates either singular or
plural into the language used by the application,
depending on the given number.
The arguments arg1, ..., are optional and used to
replace the placeholders %1, %2, etc.
void i18ncp(String context, String singular, String plural, int number, arg1, ...);
Translates either singular or
plural into the language used by the application,
depending on the given number. Additionally, the
string context is visible to translators so they
can provide a better translation. The arguments arg1,
..., are optional and used to replace the placeholders %1,
%2, etc.The View APIWhenever a script is being executed, there is a global variable
view representing the current active editor
view. The following is a list of all available View functions.
Cursor view.cursorPosition()Returns the current cursor position in the view.
void view.setCursorPosition(int line, int column);
void view.setCursorPosition(Cursor cursor);
Set the current cursor position to either (line, column) or to the given cursor.
Cursor view.virtualCursorPosition();
Returns the virtual cursor position with each tab counting the corresponding amount of spaces depending on the current tab width.
void view.setVirtualCursorPosition(int line, int column);
void view.setVirtualCursorPosition(Cursor cursor);
Set the current virtual cursor position to (line, column) or to the given cursor.
String view.selectedText();
Returns the selected text. If no text is selected, the returned string is empty.
bool view.hasSelection();
Returns true, if the view has selected text, otherwise false.
Range view.selection();
Returns the selected text range. The returned range is invalid if there is no
selected text.
void view.setSelection(Range range);
Set the selected text to the given range.
void view.removeSelectedText();
Remove the selected text. If the view does not have any selected text, this
does nothing.
void view.selectAll();
Selects the entire text in the document.
void view.clearSelection();
Clears the text selection without removing the text.
The Document API
Whenever a script is being executed, there is a global variable
document representing the current active
document. The following is a list of all available Document functions.
String document.fileName();
Returns the document's filename or an empty string for unsaved text buffers.
String document.url();
Returns the document's full url or an empty string for unsaved text buffers.
String document.mimeType();
Returns the document's mime type or the mime type application/octet-stream
if no appropriate mime type could be found.
String document.encoding();
Returns the currently used encoding to save the file.
String document.highlightingMode();
Returns the global highlighting mode used for the whole document.
String document.highlightingModeAt(Cursor pos);
Returns the highlighting mode used at the given position in the document.
Array document.embeddedHighlightingModes();
Returns an array of highlighting modes embedded in this document.
bool document.isModified();
Returns true, if the document has unsaved changes (modified), otherwise false.
String document.text();
Returns the entire content of the document in a single text string. Newlines
are marked with the newline character \n.
String document.text(int fromLine, int fromColumn, int toLine, int toColumn);
String document.text(Cursor from, Cursor to);
String document.text(Range range);
Returns the text in the given range. It is recommended to use the cursor
and range based version for better readability of the source code.
String document.line(int line);
Returns the given text line as string. The string is empty if the requested
line is out of range.
String document.wordAt(int line, int column);
String document.wordAt(Cursor cursor);
Returns the word at the given cursor position.
Range document.wordRangeAt(int line, int column);
Range document.wordRangeAt(Cursor cursor);
Return the range of the word at the given cursor position. The returned range
is invalid (see Range.isValid()), if the text position is after the end of a
line. If there is no word at the given cursor, an empty range is returned.
Since: &kde; 4.9
String document.charAt(int line, int column);
String document.charAt(Cursor cursor);
Returns the character at the given cursor position.
String document.firstChar(int line);
Returns the first character in the given line
that is not a whitespace. The first character is at column 0. If the line
is empty or only contains whitespace characters, the returned string is
empty.
String document.lastChar(int line);
Returns the last character in the given line
that is not a whitespace. If the line is empty or only contains whitespace
characters, the returned string is empty.
bool document.isSpace(int line, int column);
bool document.isSpace(Cursor cursor);
Returns true, if the character at the given cursor position is a whitespace,
otherwise false.
bool document.matchesAt(int line, int column, String text);
bool document.matchesAt(Cursor cursor, String text);
Returns true, if the given text matches at the
corresponding cursor position, otherwise false.
bool document.startsWith(int line, String text, bool skipWhiteSpaces);
Returns true, if the line starts with text, otherwise false.
The argument skipWhiteSpaces controls whether leading whitespaces are ignored.
bool document.endsWith(int line, String text, bool skipWhiteSpaces);
Returns true, if the line ends with text, otherwise false.
The argument skipWhiteSpaces controls whether trailing whitespaces are ignored.
bool document.setText(String text);
Sets the entire document text.
bool document.clear();
Removes the entire text in the document.
bool document.truncate(int line, int column);
bool document.truncate(Cursor cursor);
Truncate the given line at the given column or cursor position. Returns true
on success, or false if the given line is not part of the document range.
bool document.insertText(int line, int column, String text);
bool document.insertText(Cursor cursor, String text);
Inserts the text at the given cursor position.
Returns true on success, or false, if the document is in read-only mode.
bool document.removeText(int fromLine, int fromColumn, int toLine, int toColumn);
bool document.removeText(Cursor from, Cursor to);
bool document.removeText(Range range);
Removes the text in the given range. Returns true on success, or false, if
the document is in read-only mode.
bool document.insertLine(int line, String text);
Inserts text in the given line. Returns true on success, or false, if the
document is in read-only mode or the line is not in the document range.
bool document.removeLine(int line);
Removes the given text line. Returns true on success, or false, if the
document is in read-only mode or the line is not in the document range.
bool document.wrapLine(int line, int column);
bool document.wrapLine(Cursor cursor);
Wraps the line at the given cursor position. Returns true on success,
otherwise false, ⪚ if line < 0.
Since: &kde; 4.9
void document.joinLines(int startLine, int endLine);
Joins the lines from startLine to endLine.
Two succeeding text lines are always separated with a single space.
int document.lines();
Returns the number of lines in the document.
bool document.isLineModified(int line);
Returns true, if line currently contains unsaved data.
Since: &kde; 5.0
bool document.isLineSaved(int line);
Returns true, if line was changed, but the document was saved.
Hence, the line currently does not contain any unsaved data.
Since: &kde; 5.0
bool document.isLineTouched(int line);
Returns true, if line currently contains unsaved data or was changed before.
Since: &kde; 5.0
bool document.findTouchedLine(int startLine, bool down);
Search for the next touched line starting at line.
The search is performed either upwards or downwards depending on the search direction specified in down.
Since: &kde; 5.0
int document.length();
Returns the number of characters in the document.
int document.lineLength(int line);
Returns the line's length.
void document.editBegin();
Starts an edit group for undo/redo grouping. Make sure to always call
editEnd() as often as you call
editBegin(). Calling editBegin()
internally uses a reference counter, &ie;, this call can be nested.
void document.editEnd();
Ends an edit group. The last call of editEnd() (&ie;
the one for the first call of editBegin()) finishes
the edit step.
int document.firstColumn(int line);
Returns the first non-whitespace column in the given line.
If there are only whitespaces in the line, the return value is -1.
int document.lastColumn(int line);
Returns the last non-whitespace column in the given line.
If there are only whitespaces in the line, the return value is -1.
int document.prevNonSpaceColumn(int line, int column);
int document.prevNonSpaceColumn(Cursor cursor);
Returns the column with a non-whitespace character starting at the given
cursor position and searching backwards.
int document.nextNonSpaceColumn(int line, int column);
int document.nextNonSpaceColumn(Cursor cursor);
Returns the column with a non-whitespace character starting at the given
cursor position and searching forwards.
int document.prevNonEmptyLine(int line);
Returns the next non-empty line containing non-whitespace characters
searching backwards.
int document.nextNonEmptyLine(int line);
Returns the next non-empty line containing non-whitespace characters
searching forwards.
bool document.isInWord(String character, int attribute);
Returns true, if the given character with the
given attribute can be part of a word, otherwise
false.
bool document.canBreakAt(String character, int attribute);
Returns true, if the given character with the given
attribute is suited to wrap a line, otherwise
false.
bool document.canComment(int startAttribute, int endAttribute);
Returns true, if a range starting and ending with the given attributes is
suited to be commented out, otherwise false.
String document.commentMarker(int attribute);
Returns the comment marker for single line comments for a given attribute.
String document.commentStart(int attribute);
Returns the comment marker for the start of multi-line comments for a given
attribute.
String document.commentEnd(int attribute);
Returns the comment marker for the end of multi-line comments for a given
attribute.
Range document.documentRange();
Returns a range that encompasses the whole document.
Cursor documentEnd();
Returns a cursor positioned at the last column of the last line in the document.
bool isValidTextPosition(int line, int column);
bool isValidTextPosition(Cursor cursor);
Returns true, if the given cursor position is positioned at a valid text position.
A text position is valid only if it locate at the start, in the middle, or the end of a valid line.
Further, a text position is invalid if it is located in a Unicode surrogate.
Since: &kde; 5.0
int document.attribute(int line, int column);
int document.attribute(Cursor cursor);
Returns the attribute at the given cursor position.
bool document.isAttribute(int line, int column, int attribute);
bool document.isAttribute(Cursor cursor, int attribute);
Returns true, if the attribute at the given cursor position equals attribute,
otherwise false.
String document.attributeName(int line, int column);
String document.attributeName(Cursor cursor);
Returns the attribute name as human readable text. This is equal to the
itemData name in the syntax highlighting files.
bool document.isAttributeName(int line, int column, String name);
bool document.isAttributeName(Cursor cursor, String name);
Returns true, if the attribute name at a certain cursor position matches
the given name, otherwise false.
String document.variable(String key);
Returns the value of the requested document variable key.
If the document variable does not exist, the return value is an empty string.
void document.setVariable(String key, String value);
Set the value of the requested document variable key.
See also: Kate document variables
Since: &kde; 4.8
int document.firstVirtualColumn(int line);
Returns the virtual column of the first non-whitespace character in the given
line or -1, if the line is empty or contains only whitespace characters.
int document.lastVirtualColumn(int line);
Returns the virtual column of the last non-whitespace character in the given
line or -1, if the line is empty or contains only whitespace characters.
int document.toVirtualColumn(int line, int column);
int document.toVirtualColumn(Cursor cursor);
Cursor document.toVirtualCursor(Cursor cursor);
Converts the given real cursor position to a virtual cursor position,
either returning an int or a Cursor object.
int document.fromVirtualColumn(int line, int virtualColumn);
int document.fromVirtualColumn(Cursor virtualCursor);
Cursor document.fromVirtualCursor(Cursor virtualCursor);
Converts the given virtual cursor position to a real cursor position,
either returning an int or a Cursor object.
Cursor document.anchor(int line, int column, Char character);
Cursor document.anchor(Cursor cursor, Char character);
Searches backward for the given character starting from the given cursor.
As an example, if '(' is passed as character, this function will return the
position of the opening '('. This reference counting, &ie; other '(...)'
are ignored.
Cursor document.rfind(int line, int column, String text, int attribute = -1);
Cursor document.rfind(Cursor cursor, String text, int attribute = -1);
Find searching backwards the given text with the appropriate attribute.
The argument attribute is ignored if it is set to
-1. The returned cursor is invalid, if the text could not be found.
int document.defStyleNum(int line, int column);
int document.defStyleNum(Cursor cursor);
Returns the default style used at the given cursor position.
bool document.isCode(int line, int column);
bool document.isCode(Cursor cursor);
Returns true, if the attribute at the given cursor position is not equal
to all of the following styles: dsComment,
dsString, dsRegionMarker,
dsChar, dsOthers.
bool document.isComment(int line, int column);
bool document.isComment(Cursor cursor);
Returns true, if the attribute of the character at the cursor position
is dsComment, otherwise false.
bool document.isString(int line, int column);
bool document.isString(Cursor cursor);
Returns true, if the attribute of the character at the cursor position
is dsString, otherwise false.
bool document.isRegionMarker(int line, int column);
bool document.isRegionMarker(Cursor cursor);
Returns true, if the attribute of the character at the cursor position
is dsRegionMarker, otherwise false.
bool document.isChar(int line, int column);
bool document.isChar(Cursor cursor);
Returns true, if the attribute of the character at the cursor position
is dsChar, otherwise false.
bool document.isOthers(int line, int column);
bool document.isOthers(Cursor cursor);
Returns true, if the attribute of the character at the cursor position
is dsOthers, otherwise false.