diff --git a/CMakeLists.txt b/CMakeLists.txt index df024f729..c47c68994 100644 --- a/CMakeLists.txt +++ b/CMakeLists.txt @@ -1,379 +1,387 @@ project(labplot2) # minimum 3.2.0 for FindGSL.cmake cmake_minimum_required (VERSION 3.2.0 FATAL_ERROR) set(CMAKE_C_STANDARD 99) set(CMAKE_C_STANDARD_REQUIRED ON) set(CMAKE_CXX_STANDARD 11) set(CMAKE_CXX_STANDARD_REQUIRED ON) set(CMAKE_CXX_EXTENSIONS OFF) set(QT_MINIMUM_VERSION 5.6.0) set(KF5_MIN_VERSION "5.16.0") set(APPLE_SUPPRESS_X11_WARNING ON) find_package(ECM REQUIRED NO_MODULE) set(CMAKE_MODULE_PATH ${CMAKE_CURRENT_SOURCE_DIR}/cmake/ ${ECM_MODULE_PATH} ${ECM_KDE_MODULE_DIR}) # build type: "release", "debug", "debugfull" string (TOLOWER "${CMAKE_BUILD_TYPE}" CMAKE_BUILD_TYPE) find_package(Qt5 ${QT_MIN_VERSION} NO_MODULE REQUIRED COMPONENTS Concurrent Gui Qml Quick QuickWidgets PrintSupport Sql Svg Widgets Test SerialPort ) find_package(KF5 ${KF5_MIN_VERSION} REQUIRED COMPONENTS Archive Completion Config ConfigWidgets CoreAddons Crash DocTools I18n IconThemes KIO TextWidgets WidgetsAddons XmlGui NewStuffCore NewStuff OPTIONAL_COMPONENTS Service Parts SyntaxHighlighting ) IF (Qt5SerialPort_FOUND) - MESSAGE (STATUS "Found Qt5 SerialPort") + MESSAGE (STATUS "Found Qt5 SerialPort") ELSE () - MESSAGE (STATUS "Qt5 SerialPort not found") + MESSAGE (STATUS "Qt5 SerialPort not found") ENDIF () IF (KF5NewStuff_FOUND) - MESSAGE (STATUS "Found KF5 new stuff") + MESSAGE (STATUS "Found KF5 new stuff") add_definitions (-DHAVE_KF5_NEW_STUFF) ELSE () MESSAGE (STATUS "KF5 new stuff not found") ENDIF () IF (KF5SyntaxHighlighting_FOUND) - MESSAGE (STATUS "Found KF5 syntax highlighting") + MESSAGE (STATUS "Found KF5 syntax highlighting") add_definitions (-DHAVE_KF5_SYNTAX_HIGHLIGHTING) ELSE () - MESSAGE (STATUS "KF5 syntax highlighting not found") + MESSAGE (STATUS "KF5 syntax highlighting not found") +ENDIF () + +find_package(KUserFeedback) +IF (KUserFeedback_FOUND) + MESSAGE (STATUS "Found KUserFeedback") + add_definitions (-DHAVE_KUSERFEEDBACK) +ELSE () + MESSAGE (STATUS "KUserFeedback not found") ENDIF () find_package(BISON REQUIRED) include(FeatureSummary) include(ECMAddAppIcon) include(ECMInstallIcons) include(KDEInstallDirs) include(KDECompilerSettings) include(KDECMakeSettings) ### compiler flags ###################################### set (GENERIC_FLAGS "-Wall -Wextra -Wundef -Wpointer-arith -Wunreachable-code -Wunused -Wdeprecated-declarations -fno-omit-frame-pointer -fstack-protector") set (GENERIC_GNU_FLAGS "-O2 -Wcast-align -Wswitch-enum -fvisibility=default") set (GENERIC_C_FLAGS "${GENERIC_FLAGS} -fno-exceptions") # liborigin needs exceptions set (GENERIC_CXX_FLAGS "${GENERIC_FLAGS} -fexceptions") if ("${CMAKE_C_COMPILER_ID}" MATCHES "GNU") message(STATUS "GNU C compiler detected, adding compile flags") set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} ${GENERIC_C_FLAGS} ${GENERIC_GNU_FLAGS}") elseif ("${CMAKE_C_COMPILER_ID}" MATCHES "Clang") message(STATUS "Clang C compiler detected, adding compile flags") set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -D_GNU_SOURCE ${GENERIC_C_FLAGS} ${GENERIC_GNU_FLAGS}") elseif ("${CMAKE_C_COMPILER_ID}" MATCHES "Intel") message(STATUS "Intel C compiler detected, adding compile flags") set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -D_GNU_SOURCE -O3 ${GENERIC_C_FLAGS}") elseif ("${CMAKE_C_COMPILER_ID}" MATCHES "PGI") message(STATUS "PGI C compiler detected, adding compile flags") set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -D_GNU_SOURCE -O3 -D__GCC_ATOMIC_TEST_AND_SET_TRUEVAL=1 -Minform=inform -Mbounds -Mchkstk") # " x" postfix to work around a bug in CMake that causes "MSVC" to translate to something completely different elseif (("${CMAKE_C_COMPILER_ID} x" MATCHES "MSVC") OR MSVC) message(STATUS "MSVC C compiler detected, adding compile flags") set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -O2 -W3") set(MSVC_FOUND TRUE) else () message(STATUS "UNKNOWN C compiler, adding compile flags") set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} ${GENERIC_C_FLAGS}") endif() if ("${CMAKE_CXX_COMPILER_ID}" MATCHES "GNU") message(STATUS "GNU C++ compiler detected, adding compile flags") set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} ${GENERIC_CXX_FLAGS} ${GENERIC_GNU_FLAGS}") elseif ("${CMAKE_CXX_COMPILER_ID}" MATCHES "Clang") message(STATUS "Clang C++ compiler detected, adding compile flags") set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -D_GNU_SOURCE ${GENERIC_CXX_FLAGS} ${GENERIC_GNU_FLAGS}") elseif ("${CMAKE_CXX_COMPILER_ID}" MATCHES "Intel") message(STATUS "Intel C++ compiler detected, adding compile flags") set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -D_GNU_SOURCE -std=c++11 ${GENERIC_CXX_FLAGS}") #-std=c++0x comes with cmake's general flags, deprecated in icc, remove it string(REPLACE "-std=c++0x" "" CMAKE_CXX_FLAGS ${CMAKE_CXX_FLAGS}) elseif ("${CMAKE_CXX_COMPILER_ID}" MATCHES "PGI") message(STATUS "PGI C++ compiler detected, adding compile flags") set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -D_GNU_SOURCE -O3 -std=c++11 -D__GCC_ATOMIC_TEST_AND_SET_TRUEVAL=1 -Minform=inform -Mbounds -Mchkstk") # " x" postfix to work around a bug in CMake that causes "MSVC" to translate to something completely different elseif (("${CMAKE_CXX_COMPILER_ID} x" MATCHES "MSVC") OR MSVC) message(STATUS "MSVC C++ compiler detected, adding compile flags") set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -O2 -W3 -DPSAPI_VERSION=1") set(MSVC_FOUND TRUE) else () message(STATUS "UNKNOWN C++ compiler, adding compile flags") set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} ${GENERIC_CXX_FLAGS}") endif () ##########################################################ESC[m add_definitions (${QT_DEFINITIONS} ${QT_QTDBUS_DEFINITIONS}) include_directories (${QDBUS_INCLUDE_DIRS} ${CMAKE_SOURCE_DIR} ${CMAKE_BINARY_DIR}) set(CMAKE_MODULE_PATH ${CMAKE_SOURCE_DIR}/cmake ${CMAKE_MODULE_PATH}) add_definitions (-DLVERSION=\"2.8.0\") # add_definitions (-DLDEBUG='1') set(BUILD_SHARED_LIBS true) #cmake_policy(SET CMP0002 OLD) IF (CMAKE_VERSION VERSION_EQUAL "3.3" OR CMAKE_VERSION VERSION_GREATER "3.3") cmake_policy(SET CMP0063 NEW) ENDIF() if (CMAKE_VERSION VERSION_GREATER "3.5") set(ENABLE_CLANG_TIDY OFF CACHE BOOL "Add clang-tidy automatically to builds") if (ENABLE_CLANG_TIDY) find_program (CLANG_TIDY_EXE NAMES "clang-tidy" PATHS /usr/bin) if (CLANG_TIDY_EXE) message(STATUS "Clang-tidy supported, found and enabled: ${CLANG_TIDY_EXE}") set(CLANG_TIDY_CHECKS "modernize-*,clang-analyzer-*,-clang-analyzer-cplusplus*") #set(CLANG_TIDY_CHECKS "-*,modernize-*,clang-analyzer-*") # -extra-arg=--std=c++11 set(CMAKE_CXX_CLANG_TIDY "${CLANG_TIDY_EXE};-checks=${CLANG_TIDY_CHECKS};-header-filter='${CMAKE_SOURCE_DIR}/*'" CACHE STRING "" FORCE) else() message(AUTHOR_WARNING "clang-tidy not found!") set(CMAKE_CXX_CLANG_TIDY "" CACHE STRING "" FORCE) # delete it endif() else() message(STATUS "Clang-tidy supported but disabled") endif() endif() ### Options ###################################### option(ENABLE_CANTOR "Build with Cantor support" ON) option(ENABLE_FFTW "Build with FFTW support" ON) option(ENABLE_HDF5 "Build with HDF5 support" ON) option(ENABLE_NETCDF "Build with NetCDF support" ON) option(ENABLE_FITS "Build with FITS support" ON) option(ENABLE_LIBCERF "Build with libcerf support" ON) option(ENABLE_LIBORIGIN "Build with liborigin support" ON) option(ENABLE_ROOT "Build with ROOT (CERN) support" ON) option(ENABLE_TESTS "Build with tests" ON) option(ENABLE_MQTT "Build with MQTT support" ON) ### OS macros #################################### IF (WIN32) add_definitions (-DHAVE_WINDOWS) find_library (PSAPI Psapi) message (STATUS "PSAPI: ${PSAPI}") ENDIF () ### GSL (required) ############################### FIND_PACKAGE(GSL REQUIRED) ### liborigin (included) ############################### IF (ENABLE_LIBORIGIN) add_definitions (-DHAVE_LIBORIGIN) IF (CMAKE_BUILD_TYPE STREQUAL "debug" OR CMAKE_BUILD_TYPE STREQUAL "debugfull") MESSAGE (STATUS "Origin project import (through internal liborigin) enabled (parser logging enabled)") SET (ENABLE_ORIGIN_PARSER_LOG TRUE) ELSE () MESSAGE (STATUS "Origin project import (through internal liborigin) enabled (parser logging disabled)") ENDIF () ELSE () MESSAGE (STATUS "Origin project import DISABLED") ENDIF () ### Cantorlibs (optional) ############################### IF (ENABLE_CANTOR) FIND_PACKAGE (Cantor) SET_PACKAGE_PROPERTIES(Cantor PROPERTIES URL "https://edu.kde.org/cantor/" ) IF (Cantor_FOUND) MESSAGE (STATUS "Found Cantor Library") add_definitions (-DHAVE_CANTOR_LIBS) IF (NOT ${Cantor_VERSION} VERSION_GREATER "0") add_definitions (-DOLD_CANTORLIBS_VERSION) ENDIF() IF (${Cantor_VERSION} VERSION_GREATER "19.11") FIND_PACKAGE(Poppler "0.62.0" REQUIRED COMPONENTS Qt5) ENDIF() ELSE () MESSAGE (STATUS "Cantor Library NOT FOUND") ENDIF () ELSE () MESSAGE (STATUS "Cantor Library DISABLED") ENDIF () ### FFTW (optional) ##################################### IF (ENABLE_FFTW) FIND_PACKAGE (FFTW3) IF (FFTW3_FOUND) add_definitions (-DHAVE_FFTW3) ELSE () MESSAGE (STATUS "FFTW 3 Library NOT FOUND") ENDIF () ELSE () MESSAGE (STATUS "FFTW 3 Library DISABLED") ENDIF () ### HDF5 (optional) ############################## IF (ENABLE_HDF5) FIND_PACKAGE(HDF5 COMPONENTS C) SET_PACKAGE_PROPERTIES (HDF5 PROPERTIES DESCRIPTION "Reading and writing self describing array data" URL "https://www.hdfgroup.org/solutions/hdf5/" ) IF (HDF5_FOUND) add_definitions (-DHAVE_HDF5) IF (MSVC_FOUND) set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -DH5_BUILT_AS_DYNAMIC_LIB") ENDIF () IF (HDF5_VERSION VERSION_GREATER "1.9") add_definitions (-DHAVE_AT_LEAST_HDF5_1_10_0) ENDIF () IF (HDF5_VERSION VERSION_GREATER "1.10.0.1") add_definitions (-DHAVE_AT_LEAST_HDF5_1_10_0) add_definitions (-DHAVE_AT_LEAST_HDF5_1_10_1) ENDIF () include_directories (${HDF5_INCLUDE_DIRS}) ELSE () MESSAGE (STATUS "Hierarchical Data Format (HDF5) Library NOT FOUND") ENDIF () ELSE () MESSAGE (STATUS "Hierarchical Data Format (HDF5) Library DISABLED") ENDIF () ### NETCDF (optional) ############################# IF (ENABLE_NETCDF) FIND_PACKAGE(netCDF) SET_PACKAGE_PROPERTIES(netCDF PROPERTIES DESCRIPTION "Interfaces for array-oriented data access" URL "https://www.unidata.ucar.edu/software/netcdf/" ) IF (netCDF_FOUND) add_definitions (-DHAVE_NETCDF) ELSE () MESSAGE (STATUS "Network Common Data Format (NetCDF) Library NOT FOUND") ENDIF () ELSE () MESSAGE (STATUS "Network Common Data Format (NetCDF) Library DISABLED") ENDIF () ### MQTT (optional) ############################### IF (ENABLE_MQTT) # ATTENTION: unit test uses qWaitFor() which needs Qt >= 5.10 # avoid warning for the moment using QUIET find_package(Qt5Mqtt ${QT_MIN_VERSION} QUIET NO_MODULE) IF (Qt5Mqtt_FOUND) MESSAGE (STATUS "Found MQTT Library") add_definitions (-DHAVE_MQTT) ELSE () MESSAGE (STATUS "MQTT Library NOT FOUND") ENDIF () ELSE () MESSAGE (STATUS "MQTT Library DISABLED") ENDIF () ### FITS (optional) ############################### IF (ENABLE_FITS) FIND_PACKAGE (CFitsio) SET_PACKAGE_PROPERTIES (CFitsio PROPERTIES DESCRIPTION "FITS IO Library" URL "https://heasarc.gsfc.nasa.gov/fitsio/fitsio.html" PURPOSE "Support for the FITS (Flexible Image Transport System) data format.") IF (CFITSIO_FOUND) add_definitions (-DHAVE_FITS) include_directories (${CFITSIO_INCLUDE_DIR}) ELSE () MESSAGE (STATUS "Flexible Image Transport System Data Format (FITS) Library NOT FOUND") ENDIF () ELSE () MESSAGE (STATUS "Flexible Image Transport System Data Format (FITS) Library DISABLED") ENDIF () ### LIBCERF (optional) ############################# IF (ENABLE_LIBCERF) FIND_PACKAGE (LIBCERF) IF (LIBCERF_FOUND) add_definitions (-DHAVE_LIBCERF) ELSE () MESSAGE (STATUS "libcerf library NOT FOUND") ENDIF () ELSE () MESSAGE (STATUS "libcerf library DISABLED") ENDIF () IF (ENABLE_ROOT) FIND_PACKAGE(ZLIB) SET_PACKAGE_PROPERTIES (ZLIB PROPERTIES DESCRIPTION "General purpose compression library" URL "https://www.zlib.net/" ) FIND_PACKAGE(LZ4) IF (ZLIB_FOUND AND LZ4_FOUND) MESSAGE (STATUS "Found ZIP libraries ZLIB and LZ4 (needed for ROOT importer)") add_definitions (-DHAVE_ZIP) ELSE () MESSAGE (STATUS "ZIP libraries ZLIB and LZ4 (needed for ROOT importer) NOT FOUND") ENDIF () ELSE () MESSAGE (STATUS "ROOT (CERN) importer DISABLED") ENDIF () ################################################# include(CheckFunctionExists) CHECK_FUNCTION_EXISTS(random HAVE_RANDOM_FUNCTION) ################################################# FIND_PATH (XLOCALE_INCLUDE_DIR xlocale.h /usr/include /usr/local/include ) IF (XLOCALE_INCLUDE_DIR) add_definitions (-DHAVE_XLOCALE) include_directories (${XLOCALE_INCLUDE_DIR}) ENDIF() add_subdirectory(data) add_subdirectory(icons) add_subdirectory(src) add_subdirectory(doc) IF (ENABLE_LIBORIGIN) add_subdirectory(liborigin) ENDIF () if (ENABLE_TESTS) enable_testing(true) add_subdirectory(tests) endif() install(FILES org.kde.labplot2.appdata.xml DESTINATION ${KDE_INSTALL_METAINFODIR}) feature_summary(WHAT ALL) find_package(KF5I18n CONFIG REQUIRED) ki18n_install(po) find_package(KF5DocTools CONFIG REQUIRED) kdoctools_install(po) diff --git a/src/CMakeLists.txt b/src/CMakeLists.txt index aed21f52b..b52efc7b3 100644 --- a/src/CMakeLists.txt +++ b/src/CMakeLists.txt @@ -1,538 +1,541 @@ find_package(SharedMimeInfo REQUIRED) set(KDE_FRONTEND true) set(KDEFRONTEND_DIR kdefrontend) set(BACKEND_DIR backend) set(COMMONFRONTEND_DIR commonfrontend) set(CANTOR_DIR cantor) set(TOOLS_DIR tools) set(CMAKE_AUTOMOC ON) set(SRC_BUILD_DIR ${CMAKE_CURRENT_BINARY_DIR} PARENT_SCOPE) # do not process this file set_property(SOURCE gsl_parser.h PROPERTY SKIP_AUTOMOC ON) set(GUI_SOURCES ${KDEFRONTEND_DIR}/DatasetModel.cpp ${KDEFRONTEND_DIR}/GuiObserver.cpp ${KDEFRONTEND_DIR}/GuiTools.cpp ${KDEFRONTEND_DIR}/HistoryDialog.cpp ${KDEFRONTEND_DIR}/MainWin.cpp ${KDEFRONTEND_DIR}/SettingsDialog.cpp ${KDEFRONTEND_DIR}/SettingsGeneralPage.cpp ${KDEFRONTEND_DIR}/SettingsWorksheetPage.cpp ${KDEFRONTEND_DIR}/SettingsWelcomePage.cpp ${KDEFRONTEND_DIR}/SettingsDatasetsPage.cpp ${KDEFRONTEND_DIR}/SettingsPage.h ${KDEFRONTEND_DIR}/TemplateHandler.cpp ${KDEFRONTEND_DIR}/ThemeHandler.cpp ${KDEFRONTEND_DIR}/welcomescreen/WelcomeScreenHelper.cpp ${KDEFRONTEND_DIR}/datasources/AsciiOptionsWidget.cpp ${KDEFRONTEND_DIR}/datasources/BinaryOptionsWidget.cpp ${KDEFRONTEND_DIR}/datasources/DatabaseManagerDialog.cpp ${KDEFRONTEND_DIR}/datasources/DatabaseManagerWidget.cpp ${KDEFRONTEND_DIR}/datasources/DatasetMetadataManagerDialog.cpp ${KDEFRONTEND_DIR}/datasources/DatasetMetadataManagerWidget.cpp ${KDEFRONTEND_DIR}/datasources/HDF5OptionsWidget.cpp ${KDEFRONTEND_DIR}/datasources/FileInfoDialog.cpp ${KDEFRONTEND_DIR}/datasources/ImageOptionsWidget.cpp ${KDEFRONTEND_DIR}/datasources/ImportDatasetWidget.cpp ${KDEFRONTEND_DIR}/datasources/ImportDatasetDialog.cpp ${KDEFRONTEND_DIR}/datasources/ImportDialog.cpp ${KDEFRONTEND_DIR}/datasources/ImportFileWidget.cpp ${KDEFRONTEND_DIR}/datasources/ImportFileDialog.cpp ${KDEFRONTEND_DIR}/datasources/ImportProjectDialog.cpp ${KDEFRONTEND_DIR}/datasources/ImportSQLDatabaseDialog.cpp ${KDEFRONTEND_DIR}/datasources/ImportSQLDatabaseWidget.cpp ${KDEFRONTEND_DIR}/datasources/NetCDFOptionsWidget.cpp ${KDEFRONTEND_DIR}/datasources/ROOTOptionsWidget.cpp ${KDEFRONTEND_DIR}/datasources/FITSOptionsWidget.cpp ${KDEFRONTEND_DIR}/datasources/JsonOptionsWidget.cpp ${KDEFRONTEND_DIR}/dockwidgets/BaseDock.cpp ${KDEFRONTEND_DIR}/dockwidgets/AxisDock.cpp ${KDEFRONTEND_DIR}/dockwidgets/CursorDock.cpp ${KDEFRONTEND_DIR}/dockwidgets/ImageDock.cpp ${KDEFRONTEND_DIR}/dockwidgets/NoteDock.cpp ${KDEFRONTEND_DIR}/dockwidgets/CartesianPlotDock.cpp ${KDEFRONTEND_DIR}/dockwidgets/CartesianPlotLegendDock.cpp ${KDEFRONTEND_DIR}/dockwidgets/HistogramDock.cpp ${KDEFRONTEND_DIR}/dockwidgets/CustomPointDock.cpp ${KDEFRONTEND_DIR}/dockwidgets/ColumnDock.cpp ${KDEFRONTEND_DIR}/dockwidgets/LiveDataDock.cpp ${KDEFRONTEND_DIR}/dockwidgets/MatrixDock.cpp ${KDEFRONTEND_DIR}/dockwidgets/ProjectDock.cpp ${KDEFRONTEND_DIR}/dockwidgets/ReferenceLineDock.cpp ${KDEFRONTEND_DIR}/dockwidgets/SpreadsheetDock.cpp ${KDEFRONTEND_DIR}/dockwidgets/XYCurveDock.cpp ${KDEFRONTEND_DIR}/dockwidgets/XYEquationCurveDock.cpp ${KDEFRONTEND_DIR}/dockwidgets/XYDataReductionCurveDock.cpp ${KDEFRONTEND_DIR}/dockwidgets/XYDifferentiationCurveDock.cpp ${KDEFRONTEND_DIR}/dockwidgets/XYIntegrationCurveDock.cpp ${KDEFRONTEND_DIR}/dockwidgets/XYInterpolationCurveDock.cpp ${KDEFRONTEND_DIR}/dockwidgets/XYSmoothCurveDock.cpp ${KDEFRONTEND_DIR}/dockwidgets/XYFitCurveDock.cpp ${KDEFRONTEND_DIR}/dockwidgets/XYFourierFilterCurveDock.cpp ${KDEFRONTEND_DIR}/dockwidgets/XYFourierTransformCurveDock.cpp ${KDEFRONTEND_DIR}/dockwidgets/XYConvolutionCurveDock.cpp ${KDEFRONTEND_DIR}/dockwidgets/XYCorrelationCurveDock.cpp ${KDEFRONTEND_DIR}/dockwidgets/WorksheetDock.cpp ${KDEFRONTEND_DIR}/matrix/MatrixFunctionDialog.cpp ${KDEFRONTEND_DIR}/spreadsheet/PlotDataDialog.cpp ${KDEFRONTEND_DIR}/spreadsheet/EquidistantValuesDialog.cpp ${KDEFRONTEND_DIR}/spreadsheet/ExportSpreadsheetDialog.cpp ${KDEFRONTEND_DIR}/spreadsheet/AddSubtractValueDialog.cpp ${KDEFRONTEND_DIR}/spreadsheet/DropValuesDialog.cpp ${KDEFRONTEND_DIR}/spreadsheet/FunctionValuesDialog.cpp ${KDEFRONTEND_DIR}/spreadsheet/RandomValuesDialog.cpp ${KDEFRONTEND_DIR}/spreadsheet/SortDialog.cpp ${KDEFRONTEND_DIR}/spreadsheet/StatisticsDialog.cpp ${KDEFRONTEND_DIR}/worksheet/ExportWorksheetDialog.cpp ${KDEFRONTEND_DIR}/worksheet/GridDialog.cpp ${KDEFRONTEND_DIR}/worksheet/DynamicPresenterWidget.cpp ${KDEFRONTEND_DIR}/worksheet/PresenterWidget.cpp ${KDEFRONTEND_DIR}/worksheet/SlidingPanel.cpp ${KDEFRONTEND_DIR}/widgets/ConstantsWidget.cpp ${KDEFRONTEND_DIR}/widgets/ThemesComboBox.cpp ${KDEFRONTEND_DIR}/widgets/ThemesWidget.cpp ${KDEFRONTEND_DIR}/widgets/ExpressionTextEdit.cpp ${KDEFRONTEND_DIR}/widgets/FitOptionsWidget.cpp ${KDEFRONTEND_DIR}/widgets/FitParametersWidget.cpp ${KDEFRONTEND_DIR}/widgets/FunctionsWidget.cpp ${KDEFRONTEND_DIR}/widgets/LabelWidget.cpp ${KDEFRONTEND_DIR}/widgets/DatapickerImageWidget.cpp ${KDEFRONTEND_DIR}/widgets/DatapickerCurveWidget.cpp ${KDEFRONTEND_DIR}/widgets/FITSHeaderEditWidget.cpp ${KDEFRONTEND_DIR}/widgets/FITSHeaderEditNewKeywordDialog.cpp ${KDEFRONTEND_DIR}/widgets/FITSHeaderEditAddUnitDialog.cpp ${KDEFRONTEND_DIR}/widgets/FITSHeaderEditDialog.cpp ${KDEFRONTEND_DIR}/widgets/ResizableTextEdit.cpp ) if (Qt5Mqtt_FOUND) list(APPEND GUI_SOURCES ${KDEFRONTEND_DIR}/datasources/MQTTConnectionManagerWidget.cpp) list(APPEND GUI_SOURCES ${KDEFRONTEND_DIR}/datasources/MQTTConnectionManagerDialog.cpp) list(APPEND GUI_SOURCES ${KDEFRONTEND_DIR}/datasources/MQTTErrorWidget.cpp) list(APPEND GUI_SOURCES ${KDEFRONTEND_DIR}/datasources/MQTTSubscriptionWidget.cpp) list(APPEND GUI_SOURCES ${KDEFRONTEND_DIR}/widgets/MQTTWillSettingsWidget.cpp) endif() if(APPLE) list(APPEND GUI_SOURCES ${KDEFRONTEND_DIR}/worksheet/PresenterWidget_mac.mm) list(APPEND GUI_SOURCES ${KDEFRONTEND_DIR}/worksheet/DynamicPresenterWidget_mac.mm) endif() set(UI_SOURCES ${KDEFRONTEND_DIR}/ui/constantswidget.ui ${KDEFRONTEND_DIR}/ui/functionswidget.ui ${KDEFRONTEND_DIR}/ui/fitoptionswidget.ui ${KDEFRONTEND_DIR}/ui/fitparameterswidget.ui ${KDEFRONTEND_DIR}/ui/labelwidget.ui ${KDEFRONTEND_DIR}/ui/settingsgeneralpage.ui ${KDEFRONTEND_DIR}/ui/settingsworksheetpage.ui ${KDEFRONTEND_DIR}/ui/settingswelcomepage.ui ${KDEFRONTEND_DIR}/ui/settingsdatasetspage.ui ${KDEFRONTEND_DIR}/ui/settingsprintingpage.ui ${KDEFRONTEND_DIR}/ui/datasources/asciioptionswidget.ui ${KDEFRONTEND_DIR}/ui/datasources/binaryoptionswidget.ui ${KDEFRONTEND_DIR}/ui/datasources/databasemanagerwidget.ui ${KDEFRONTEND_DIR}/ui/datasources/datasetmetadatamanagerwidget.ui ${KDEFRONTEND_DIR}/ui/datasources/hdf5optionswidget.ui ${KDEFRONTEND_DIR}/ui/datasources/imageoptionswidget.ui ${KDEFRONTEND_DIR}/ui/datasources/importdatasetwidget.ui ${KDEFRONTEND_DIR}/ui/datasources/importfilewidget.ui ${KDEFRONTEND_DIR}/ui/datasources/importprojectwidget.ui ${KDEFRONTEND_DIR}/ui/datasources/importsqldatabasewidget.ui ${KDEFRONTEND_DIR}/ui/datasources/netcdfoptionswidget.ui ${KDEFRONTEND_DIR}/ui/datasources/rootoptionswidget.ui ${KDEFRONTEND_DIR}/ui/datasources/fitsoptionswidget.ui ${KDEFRONTEND_DIR}/ui/datasources/jsonoptionswidget.ui ${KDEFRONTEND_DIR}/ui/dockwidgets/axisdock.ui ${KDEFRONTEND_DIR}/ui/dockwidgets/cursordock.ui ${KDEFRONTEND_DIR}/ui/dockwidgets/cartesianplotdock.ui ${KDEFRONTEND_DIR}/ui/dockwidgets/cartesianplotlegenddock.ui ${KDEFRONTEND_DIR}/ui/dockwidgets/histogramdock.ui ${KDEFRONTEND_DIR}/ui/dockwidgets/columndock.ui ${KDEFRONTEND_DIR}/ui/dockwidgets/custompointdock.ui ${KDEFRONTEND_DIR}/ui/dockwidgets/imagedock.ui ${KDEFRONTEND_DIR}/ui/dockwidgets/livedatadock.ui ${KDEFRONTEND_DIR}/ui/dockwidgets/notedock.ui ${KDEFRONTEND_DIR}/ui/dockwidgets/matrixdock.ui ${KDEFRONTEND_DIR}/ui/dockwidgets/projectdock.ui ${KDEFRONTEND_DIR}/ui/dockwidgets/referencelinedock.ui ${KDEFRONTEND_DIR}/ui/dockwidgets/spreadsheetdock.ui ${KDEFRONTEND_DIR}/ui/dockwidgets/xycurvedock.ui ${KDEFRONTEND_DIR}/ui/dockwidgets/xycurvedockgeneraltab.ui ${KDEFRONTEND_DIR}/ui/dockwidgets/xydatareductioncurvedockgeneraltab.ui ${KDEFRONTEND_DIR}/ui/dockwidgets/xydifferentiationcurvedockgeneraltab.ui ${KDEFRONTEND_DIR}/ui/dockwidgets/xyintegrationcurvedockgeneraltab.ui ${KDEFRONTEND_DIR}/ui/dockwidgets/xyinterpolationcurvedockgeneraltab.ui ${KDEFRONTEND_DIR}/ui/dockwidgets/xysmoothcurvedockgeneraltab.ui ${KDEFRONTEND_DIR}/ui/dockwidgets/xyfitcurvedockgeneraltab.ui ${KDEFRONTEND_DIR}/ui/dockwidgets/xyfourierfiltercurvedockgeneraltab.ui ${KDEFRONTEND_DIR}/ui/dockwidgets/xyfouriertransformcurvedockgeneraltab.ui ${KDEFRONTEND_DIR}/ui/dockwidgets/xyconvolutioncurvedockgeneraltab.ui ${KDEFRONTEND_DIR}/ui/dockwidgets/xycorrelationcurvedockgeneraltab.ui ${KDEFRONTEND_DIR}/ui/dockwidgets/xyequationcurvedockgeneraltab.ui ${KDEFRONTEND_DIR}/ui/dockwidgets/worksheetdock.ui ${KDEFRONTEND_DIR}/ui/matrix/matrixfunctionwidget.ui ${KDEFRONTEND_DIR}/ui/spreadsheet/plotdatawidget.ui ${KDEFRONTEND_DIR}/ui/spreadsheet/equidistantvalueswidget.ui ${KDEFRONTEND_DIR}/ui/spreadsheet/exportspreadsheetwidget.ui ${KDEFRONTEND_DIR}/ui/spreadsheet/addsubtractvaluewidget.ui ${KDEFRONTEND_DIR}/ui/spreadsheet/dropvalueswidget.ui ${KDEFRONTEND_DIR}/ui/spreadsheet/functionvalueswidget.ui ${KDEFRONTEND_DIR}/ui/spreadsheet/randomvalueswidget.ui ${KDEFRONTEND_DIR}/ui/spreadsheet/sortdialogwidget.ui ${KDEFRONTEND_DIR}/ui/worksheet/exportworksheetwidget.ui ${KDEFRONTEND_DIR}/ui/datapickerimagewidget.ui ${KDEFRONTEND_DIR}/ui/datapickercurvewidget.ui ${KDEFRONTEND_DIR}/ui/fitsheadereditwidget.ui ${KDEFRONTEND_DIR}/ui/fitsheadereditnewkeywordwidget.ui ${KDEFRONTEND_DIR}/ui/fitsheadereditaddunitwidget.ui ) if (Qt5Mqtt_FOUND) list(APPEND UI_SOURCES ${KDEFRONTEND_DIR}/ui/datasources/mqttconnectionmanagerwidget.ui) list(APPEND UI_SOURCES ${KDEFRONTEND_DIR}/ui/datasources/mqtterrorwidget.ui) list(APPEND UI_SOURCES ${KDEFRONTEND_DIR}/ui/datasources/mqttsubscriptionwidget.ui) list(APPEND UI_SOURCES ${KDEFRONTEND_DIR}/ui/mqttwillsettingswidget.ui) endif() set(BACKEND_SOURCES ${BACKEND_DIR}/core/Folder.cpp ${BACKEND_DIR}/core/AbstractAspect.cpp ${BACKEND_DIR}/core/AbstractColumn.cpp ${BACKEND_DIR}/core/AbstractColumnPrivate.cpp ${BACKEND_DIR}/core/abstractcolumncommands.cpp ${BACKEND_DIR}/core/AbstractFilter.cpp ${BACKEND_DIR}/core/AbstractSimpleFilter.cpp ${BACKEND_DIR}/core/column/Column.cpp ${BACKEND_DIR}/core/column/ColumnPrivate.cpp ${BACKEND_DIR}/core/column/ColumnStringIO.cpp ${BACKEND_DIR}/core/column/columncommands.cpp ${BACKEND_DIR}/core/Project.cpp ${BACKEND_DIR}/core/AbstractPart.cpp ${BACKEND_DIR}/core/Workbook.cpp ${BACKEND_DIR}/core/AspectTreeModel.cpp ${BACKEND_DIR}/core/datatypes/SimpleCopyThroughFilter.h ${BACKEND_DIR}/core/datatypes/Double2DateTimeFilter.h ${BACKEND_DIR}/core/datatypes/Double2DayOfWeekFilter.h ${BACKEND_DIR}/core/datatypes/Double2IntegerFilter.h ${BACKEND_DIR}/core/datatypes/Double2MonthFilter.h ${BACKEND_DIR}/core/datatypes/Double2StringFilter.cpp ${BACKEND_DIR}/core/datatypes/Integer2DateTimeFilter.h ${BACKEND_DIR}/core/datatypes/Integer2DayOfWeekFilter.h ${BACKEND_DIR}/core/datatypes/Integer2DoubleFilter.h ${BACKEND_DIR}/core/datatypes/Integer2MonthFilter.h ${BACKEND_DIR}/core/datatypes/Integer2StringFilter.h ${BACKEND_DIR}/core/datatypes/String2DayOfWeekFilter.h ${BACKEND_DIR}/core/datatypes/String2DoubleFilter.h ${BACKEND_DIR}/core/datatypes/String2IntegerFilter.h ${BACKEND_DIR}/core/datatypes/String2MonthFilter.h ${BACKEND_DIR}/core/datatypes/String2DateTimeFilter.cpp ${BACKEND_DIR}/core/datatypes/DateTime2DoubleFilter.h ${BACKEND_DIR}/core/datatypes/DateTime2IntegerFilter.h ${BACKEND_DIR}/core/datatypes/DateTime2StringFilter.cpp ${BACKEND_DIR}/core/datatypes/Month2DoubleFilter.h ${BACKEND_DIR}/core/datatypes/Month2IntegerFilter.h ${BACKEND_DIR}/core/datatypes/DayOfWeek2DoubleFilter.h ${BACKEND_DIR}/core/datatypes/DayOfWeek2IntegerFilter.h ${BACKEND_DIR}/core/plugin/PluginLoader.cpp ${BACKEND_DIR}/core/plugin/PluginManager.cpp ${BACKEND_DIR}/datasources/AbstractDataSource.cpp ${BACKEND_DIR}/datasources/DatasetHandler.cpp ${BACKEND_DIR}/datasources/LiveDataSource.cpp ${BACKEND_DIR}/datasources/filters/AbstractFileFilter.cpp ${BACKEND_DIR}/datasources/filters/AsciiFilter.cpp ${BACKEND_DIR}/datasources/filters/BinaryFilter.cpp ${BACKEND_DIR}/datasources/filters/HDF5Filter.cpp ${BACKEND_DIR}/datasources/filters/ImageFilter.cpp ${BACKEND_DIR}/datasources/filters/JsonFilter.cpp ${BACKEND_DIR}/datasources/filters/NetCDFFilter.cpp ${BACKEND_DIR}/datasources/filters/NgspiceRawAsciiFilter.cpp ${BACKEND_DIR}/datasources/filters/NgspiceRawBinaryFilter.cpp ${BACKEND_DIR}/datasources/filters/FITSFilter.cpp ${BACKEND_DIR}/datasources/filters/QJsonModel.cpp ${BACKEND_DIR}/datasources/filters/ROOTFilter.cpp ${BACKEND_DIR}/datasources/projects/ProjectParser.cpp ${BACKEND_DIR}/datasources/projects/LabPlotProjectParser.cpp ${BACKEND_DIR}/gsl/ExpressionParser.cpp ${BACKEND_DIR}/matrix/Matrix.cpp ${BACKEND_DIR}/matrix/matrixcommands.cpp ${BACKEND_DIR}/matrix/MatrixModel.cpp ${BACKEND_DIR}/spreadsheet/Spreadsheet.cpp ${BACKEND_DIR}/spreadsheet/SpreadsheetModel.cpp ${BACKEND_DIR}/lib/XmlStreamReader.cpp ${BACKEND_DIR}/note/Note.cpp ${BACKEND_DIR}/worksheet/Image.cpp ${BACKEND_DIR}/worksheet/WorksheetElement.cpp ${BACKEND_DIR}/worksheet/TextLabel.cpp ${BACKEND_DIR}/worksheet/Worksheet.cpp ${BACKEND_DIR}/worksheet/WorksheetElementContainer.cpp ${BACKEND_DIR}/worksheet/WorksheetElementGroup.cpp ${BACKEND_DIR}/worksheet/TreeModel.cpp ${BACKEND_DIR}/worksheet/plots/AbstractPlot.cpp ${BACKEND_DIR}/worksheet/plots/AbstractCoordinateSystem.cpp ${BACKEND_DIR}/worksheet/plots/PlotArea.cpp ${BACKEND_DIR}/worksheet/plots/cartesian/Axis.cpp ${BACKEND_DIR}/worksheet/plots/cartesian/CartesianCoordinateSystem.cpp ${BACKEND_DIR}/worksheet/plots/cartesian/CartesianPlot.cpp ${BACKEND_DIR}/worksheet/plots/cartesian/CartesianPlotLegend.cpp ${BACKEND_DIR}/worksheet/plots/cartesian/Histogram.cpp ${BACKEND_DIR}/worksheet/plots/cartesian/CustomPoint.cpp ${BACKEND_DIR}/worksheet/plots/cartesian/ReferenceLine.cpp ${BACKEND_DIR}/worksheet/plots/cartesian/Symbol.cpp ${BACKEND_DIR}/worksheet/plots/cartesian/XYAnalysisCurve.cpp ${BACKEND_DIR}/worksheet/plots/cartesian/XYCurve.cpp ${BACKEND_DIR}/worksheet/plots/cartesian/XYEquationCurve.cpp ${BACKEND_DIR}/worksheet/plots/cartesian/XYDataReductionCurve.cpp ${BACKEND_DIR}/worksheet/plots/cartesian/XYDifferentiationCurve.cpp ${BACKEND_DIR}/worksheet/plots/cartesian/XYIntegrationCurve.cpp ${BACKEND_DIR}/worksheet/plots/cartesian/XYInterpolationCurve.cpp ${BACKEND_DIR}/worksheet/plots/cartesian/XYSmoothCurve.cpp ${BACKEND_DIR}/worksheet/plots/cartesian/XYFitCurve.cpp ${BACKEND_DIR}/worksheet/plots/cartesian/XYFourierFilterCurve.cpp ${BACKEND_DIR}/worksheet/plots/cartesian/XYFourierTransformCurve.cpp ${BACKEND_DIR}/worksheet/plots/cartesian/XYConvolutionCurve.cpp ${BACKEND_DIR}/worksheet/plots/cartesian/XYCorrelationCurve.cpp ${BACKEND_DIR}/lib/SignallingUndoCommand.cpp ${BACKEND_DIR}/datapicker/DatapickerPoint.cpp ${BACKEND_DIR}/datapicker/DatapickerImage.cpp ${BACKEND_DIR}/datapicker/Datapicker.cpp ${BACKEND_DIR}/datapicker/Transform.cpp ${BACKEND_DIR}/datapicker/ImageEditor.cpp ${BACKEND_DIR}/datapicker/Segment.cpp ${BACKEND_DIR}/datapicker/Segments.cpp ${BACKEND_DIR}/datapicker/DatapickerCurve.cpp ) if (Qt5Mqtt_FOUND) list(APPEND BACKEND_SOURCES ${KDEFRONTEND_DIR}/widgets/MQTTWillSettingsWidget.cpp) list(APPEND BACKEND_SOURCES ${BACKEND_DIR}/datasources/MQTTClient.cpp) list(APPEND BACKEND_SOURCES ${BACKEND_DIR}/datasources/MQTTSubscription.cpp) list(APPEND BACKEND_SOURCES ${BACKEND_DIR}/datasources/MQTTTopic.cpp) endif() # add the qml.qrc file qt5_add_resources(qml_QRC ${KDEFRONTEND_DIR}/welcomescreen/qml.qrc) IF (ENABLE_LIBORIGIN) list(APPEND BACKEND_SOURCES ${BACKEND_DIR}/datasources/projects/OriginProjectParser.cpp) ENDIF () set(NSL_SOURCES ${BACKEND_DIR}/nsl/nsl_conv.c ${BACKEND_DIR}/nsl/nsl_corr.c ${BACKEND_DIR}/nsl/nsl_dft.c ${BACKEND_DIR}/nsl/nsl_diff.c ${BACKEND_DIR}/nsl/nsl_filter.c ${BACKEND_DIR}/nsl/nsl_fit.c ${BACKEND_DIR}/nsl/nsl_geom.c ${BACKEND_DIR}/nsl/nsl_geom_linesim.c ${BACKEND_DIR}/nsl/nsl_int.c ${BACKEND_DIR}/nsl/nsl_interp.c ${BACKEND_DIR}/nsl/nsl_math.c ${BACKEND_DIR}/nsl/nsl_sf_basic.c ${BACKEND_DIR}/nsl/nsl_sf_kernel.c ${BACKEND_DIR}/nsl/nsl_sf_poly.c ${BACKEND_DIR}/nsl/nsl_sf_stats.c ${BACKEND_DIR}/nsl/nsl_sf_window.c ${BACKEND_DIR}/nsl/nsl_smooth.c ${BACKEND_DIR}/nsl/nsl_sort.c ${BACKEND_DIR}/nsl/nsl_stats.c ) IF (NOT MSVC_FOUND) IF (NOT LIBCERF_FOUND) list(APPEND NSL_SOURCES ${BACKEND_DIR}/nsl/Faddeeva.c ) ENDIF () ENDIF () set(COMMONFRONTEND_SOURCES ${COMMONFRONTEND_DIR}/matrix/MatrixView.cpp ${COMMONFRONTEND_DIR}/note/NoteView.cpp ${COMMONFRONTEND_DIR}/spreadsheet/SpreadsheetCommentsHeaderModel.cpp ${COMMONFRONTEND_DIR}/spreadsheet/SpreadsheetHeaderView.cpp ${COMMONFRONTEND_DIR}/spreadsheet/SpreadsheetItemDelegate.cpp ${COMMONFRONTEND_DIR}/spreadsheet/SpreadsheetView.cpp ${COMMONFRONTEND_DIR}/workbook/WorkbookView.cpp ${COMMONFRONTEND_DIR}/worksheet/WorksheetView.cpp ${COMMONFRONTEND_DIR}/ProjectExplorer.cpp ${COMMONFRONTEND_DIR}/core/PartMdiView.cpp ${COMMONFRONTEND_DIR}/widgets/TreeViewComboBox.cpp ${COMMONFRONTEND_DIR}/widgets/qxtspanslider.cpp ${COMMONFRONTEND_DIR}/widgets/MemoryWidget.cpp ${COMMONFRONTEND_DIR}/widgets/DateTimeSpinBox.cpp ${COMMONFRONTEND_DIR}/datapicker/DatapickerView.cpp ${COMMONFRONTEND_DIR}/datapicker/DatapickerImageView.cpp ) IF (${Cantor_FOUND}) set(CANTOR_SOURCES ${KDEFRONTEND_DIR}/dockwidgets/CantorWorksheetDock.cpp ${BACKEND_DIR}/cantorWorksheet/VariableParser.cpp ${BACKEND_DIR}/cantorWorksheet/CantorWorksheet.cpp ${COMMONFRONTEND_DIR}/cantorWorksheet/CantorWorksheetView.cpp ) set(CANTOR_UI_SOURCES ${KDEFRONTEND_DIR}/ui/dockwidgets/cantorworksheetdock.ui) set(UI_SOURCES ${UI_SOURCES} ${CANTOR_UI_SOURCES}) ELSE () set(CANTOR_SOURCES "") ENDIF () set(TOOLS_SOURCES ${TOOLS_DIR}/EquationHighlighter.cpp ${TOOLS_DIR}/ImageTools.cpp ${TOOLS_DIR}/TeXRenderer.cpp ) bison_target(GslParser ${BACKEND_DIR}/gsl/parser.y ${CMAKE_CURRENT_BINARY_DIR}/gsl_parser.c ) set(GENERATED_SOURCES ${BISON_GslParser_OUTPUTS} ) set_property(SOURCE gsl_parser.h PROPERTY SKIP_AUTOMOC ON) ############################################################################## INCLUDE_DIRECTORIES( . ${BACKEND_DIR}/gsl ${GSL_INCLUDE_DIR} ) set( LABPLOT_SRCS ${GUI_SOURCES} ) ki18n_wrap_ui( LABPLOT_SRCS ${UI_SOURCES} ) # see also QT_MINIMUM_VERSION add_definitions(-DQT_DISABLE_DEPRECATED_BEFORE=0x50500) # static library add_library( labplot2lib STATIC ${LABPLOT_SRCS} ${BACKEND_SOURCES} ${NSL_SOURCES} ${CANTOR_SOURCES} ${DATASOURCES_SOURCES} ${COMMONFRONTEND_SOURCES} ${TOOLS_SOURCES} ${GENERATED_SOURCES} ${QTMOC_HDRS} ) # set_property(TARGET ${objlib} PROPERTY POSITION_INDEPENDENT_CODE 1) target_link_libraries( labplot2lib KF5::Archive KF5::Completion KF5::ConfigCore KF5::Crash KF5::I18n KF5::IconThemes KF5::KIOCore KF5::KIOFileWidgets KF5::KIOWidgets KF5::TextWidgets KF5::XmlGui KF5::NewStuff KF5::NewStuffCore Qt5::Svg Qt5::Core Qt5::Network Qt5::PrintSupport Qt5::Sql Qt5::Qml Qt5::Quick Qt5::QuickWidgets ${GSL_LIBRARIES} ${GSL_CBLAS_LIBRARIES} ) IF (Qt5SerialPort_FOUND) target_link_libraries( labplot2lib Qt5::SerialPort ) ENDIF () IF (Qt5Mqtt_FOUND) target_link_libraries( labplot2lib Qt5::Mqtt ) ENDIF () IF (KF5SyntaxHighlighting_FOUND) target_link_libraries( labplot2lib KF5::SyntaxHighlighting ) ENDIF () +if (KUserFeedback_FOUND) + target_link_libraries(labplot2lib KUserFeedbackWidgets) +endif() #TODO: KF5::NewStuff IF (Cantor_FOUND) target_link_libraries( labplot2lib Cantor::cantorlibs KF5::Service KF5::Parts) IF (${Cantor_VERSION} VERSION_GREATER "19.11") target_link_libraries( labplot2lib Poppler::Qt5) ENDIF() ENDIF () IF (HDF5_FOUND) target_link_libraries( labplot2lib ${HDF5_LIBRARIES} ) ENDIF () IF (FFTW3_FOUND) target_link_libraries( labplot2lib ${FFTW3_LIBRARIES} ) ENDIF () IF (netCDF_FOUND) target_link_libraries( labplot2lib ${netCDF_LIBRARIES} ) ENDIF () IF (CFITSIO_FOUND) target_link_libraries( labplot2lib ${CFITSIO_LIBRARIES} ) ENDIF () IF (LIBCERF_FOUND) target_link_libraries( labplot2lib ${LIBCERF_LIBRARY} ) ENDIF () IF (ZLIB_FOUND AND LZ4_FOUND) target_link_libraries( labplot2lib ${ZLIB_LIBRARY} ${LZ4_LIBRARY} ) ENDIF () IF (ENABLE_LIBORIGIN) target_link_libraries( labplot2lib liborigin-static ) ENDIF () IF (WIN32) target_link_libraries( labplot2lib ${PSAPI} ) ENDIF () # icons for the executable and project files on Windows and Mac OS X set(LABPLOT_ICONS ${CMAKE_CURRENT_SOURCE_DIR}/../icons/16-apps-labplot2.png ${CMAKE_CURRENT_SOURCE_DIR}/../icons/32-apps-labplot2.png ${CMAKE_CURRENT_SOURCE_DIR}/../icons/48-apps-labplot2.png ${CMAKE_CURRENT_SOURCE_DIR}/../icons/64-apps-labplot2.png ${CMAKE_CURRENT_SOURCE_DIR}/../icons/128-apps-labplot2.png ${CMAKE_CURRENT_SOURCE_DIR}/../icons/256-apps-labplot2.png ${CMAKE_CURRENT_SOURCE_DIR}/../icons/512-apps-labplot2.png ) set(LML_ICONS ${CMAKE_CURRENT_SOURCE_DIR}/../icons/16-application-x-labplot2.png ${CMAKE_CURRENT_SOURCE_DIR}/../icons/32-application-x-labplot2.png ${CMAKE_CURRENT_SOURCE_DIR}/../icons/48-application-x-labplot2.png ${CMAKE_CURRENT_SOURCE_DIR}/../icons/64-application-x-labplot2.png ${CMAKE_CURRENT_SOURCE_DIR}/../icons/128-application-x-labplot2.png ${CMAKE_CURRENT_SOURCE_DIR}/../icons/256-application-x-labplot2.png ${CMAKE_CURRENT_SOURCE_DIR}/../icons/512-application-x-labplot2.png ) add_subdirectory(3rdparty) # main executable set(LABPLOT_SOURCE ${KDEFRONTEND_DIR}/LabPlot.cpp) # create icon files on WIN/MAC and add icons to the executable IF (${ECM_VERSION} VERSION_GREATER "5.48.0") # creates LABPLOT_ICONS.ico/LABPLOT_ICONS.icns ecm_add_app_icon(LABPLOT_SOURCE ICONS ${LABPLOT_ICONS} OUTFILE_BASENAME LABPLOT_ICONS) ELSE () # creates LABPLOT_SOURCE.ico/LABPLOT_SOURCE.icns ecm_add_app_icon(LABPLOT_SOURCE ICONS ${LABPLOT_ICONS}) ENDIF () # create LML_ICONS.icns on MACOSX IF (APPLE AND ${ECM_VERSION} VERSION_GREATER "5.48.0") ecm_add_app_icon(LABPLOT_SOURCE ICONS ${LML_ICONS} OUTFILE_BASENAME LML_ICONS) ENDIF () add_executable(labplot2 ${LABPLOT_SOURCE} ${qml_QRC}) target_link_libraries(labplot2 labplot2lib) IF (APPLE) target_link_libraries(labplot2 KDMacTouchBar) ENDIF() ############## installation ################################ install( TARGETS labplot2 DESTINATION ${INSTALL_TARGETS_DEFAULT_ARGS} ) install( FILES ${KDEFRONTEND_DIR}/labplot2ui.rc DESTINATION ${KXMLGUI_INSTALL_DIR}/${PROJECT_NAME} ) install( FILES ${KDEFRONTEND_DIR}/splash.png ${KDEFRONTEND_DIR}/labplot2.ico ${CMAKE_CURRENT_SOURCE_DIR}/../icons/application-x-labplot2.ico DESTINATION ${DATA_INSTALL_DIR}/${PROJECT_NAME} ) install( PROGRAMS org.kde.labplot2.desktop DESTINATION ${XDG_APPS_INSTALL_DIR} ) install( FILES labplot2.xml DESTINATION ${XDG_MIME_INSTALL_DIR} ) # if (${ECM_VERSION} STRGREATER "5.58.0") # install( FILES labplot2_themes.knsrc DESTINATION ${KDE_INSTALL_KNSRCDIR} ) # install( FILES labplot2_datasets.knsrc DESTINATION ${KDE_INSTALL_KNSRCDIR} ) # else () # install( FILES labplot2_themes.knsrc DESTINATION ${CONFIG_INSTALL_DIR} ) # install( FILES labplot2_datasets.knsrc DESTINATION ${CONFIG_INSTALL_DIR} ) # endif () update_xdg_mimetypes( ${XDG_MIME_INSTALL_DIR} ) diff --git a/src/kdefrontend/MainWin.cpp b/src/kdefrontend/MainWin.cpp index a4a1296a1..6bf4d0dbb 100644 --- a/src/kdefrontend/MainWin.cpp +++ b/src/kdefrontend/MainWin.cpp @@ -1,2390 +1,2419 @@ /*************************************************************************** File : MainWin.cc Project : LabPlot Description : Main window of the application -------------------------------------------------------------------- Copyright : (C) 2008-2018 Stefan Gerlach (stefan.gerlach@uni.kn) Copyright : (C) 2009-2020 Alexander Semke (alexander.semke@web.de) ***************************************************************************/ /*************************************************************************** * * * This program is free software; you can redistribute it and/or modify * * it under the terms of the GNU General Public License as published by * * the Free Software Foundation; either version 2 of the License, or * * (at your option) any later version. * * * * This program is distributed in the hope that it will be useful, * * but WITHOUT ANY WARRANTY; without even the implied warranty of * * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * * GNU General Public License for more details. * * * * You should have received a copy of the GNU General Public License * * along with this program; if not, write to the Free Software * * Foundation, Inc., 51 Franklin Street, Fifth Floor, * * Boston, MA 02110-1301 USA * * * ***************************************************************************/ #include "MainWin.h" #include "backend/core/Project.h" #include "backend/core/Folder.h" #include "backend/core/AspectTreeModel.h" #include "backend/core/Workbook.h" #include "backend/spreadsheet/Spreadsheet.h" #include "backend/matrix/Matrix.h" #include "backend/worksheet/Worksheet.h" #include "backend/datasources/LiveDataSource.h" #include "backend/datasources/DatasetHandler.h" #ifdef HAVE_LIBORIGIN #include "backend/datasources/projects/OriginProjectParser.h" #endif #ifdef HAVE_CANTOR_LIBS #include "backend/cantorWorksheet/CantorWorksheet.h" #endif #include "backend/datapicker/Datapicker.h" #include "backend/note/Note.h" #include "backend/lib/macros.h" #include "backend/worksheet/plots/cartesian/CartesianPlot.h" #ifdef HAVE_MQTT #include "backend/datasources/MQTTClient.h" #endif #include "commonfrontend/core/PartMdiView.h" #include "commonfrontend/ProjectExplorer.h" #include "commonfrontend/matrix/MatrixView.h" #include "commonfrontend/spreadsheet/SpreadsheetView.h" #include "commonfrontend/worksheet/WorksheetView.h" #ifdef HAVE_CANTOR_LIBS #include "commonfrontend/cantorWorksheet/CantorWorksheetView.h" #endif #include "commonfrontend/datapicker/DatapickerView.h" #include "commonfrontend/datapicker/DatapickerImageView.h" #include "commonfrontend/note/NoteView.h" #include "commonfrontend/widgets/MemoryWidget.h" #include "kdefrontend/datasources/ImportFileDialog.h" #include "kdefrontend/datasources/ImportDatasetDialog.h" #include "kdefrontend/datasources/ImportDatasetWidget.h" #include "kdefrontend/datasources/ImportProjectDialog.h" #include "kdefrontend/datasources/ImportSQLDatabaseDialog.h" #include #include "kdefrontend/dockwidgets/ProjectDock.h" #include "kdefrontend/HistoryDialog.h" #include "kdefrontend/SettingsDialog.h" #include "kdefrontend/GuiObserver.h" #include "kdefrontend/widgets/FITSHeaderEditDialog.h" #include "DatasetModel.h" #include "welcomescreen/WelcomeScreenHelper.h" +#ifdef HAVE_KUSERFEEDBACK +#include +#include +#include +#include +#include +#include +#endif + #ifdef Q_OS_MAC #include "3rdparty/kdmactouchbar/src/kdmactouchbar.h" #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef HAVE_CANTOR_LIBS #include #include #include #include //required to parse Cantor and Jupyter files #include #include #include #include #endif /*! \class MainWin \brief Main application window. \ingroup kdefrontend */ MainWin::MainWin(QWidget *parent, const QString& filename) : KXmlGuiWindow(parent), m_schemeManager(new KColorSchemeManager(this)) { initGUI(filename); setAcceptDrops(true); +#ifdef HAVE_KUSERFEEDBACK + m_userFeedbackProvider.setProductIdentifier(QStringLiteral("org.kde.labplot")); + m_userFeedbackProvider.setFeedbackServer(QUrl(QStringLiteral("https://telemetry.kde.org/"))); + m_userFeedbackProvider.setSubmissionInterval(7); + m_userFeedbackProvider.setApplicationStartsUntilEncouragement(5); + m_userFeedbackProvider.setEncouragementDelay(30); + + // software version info + m_userFeedbackProvider.addDataSource(new KUserFeedback::ApplicationVersionSource); + m_userFeedbackProvider.addDataSource(new KUserFeedback::QtVersionSource); + + // info about the machine + m_userFeedbackProvider.addDataSource(new KUserFeedback::PlatformInfoSource); + m_userFeedbackProvider.addDataSource(new KUserFeedback::ScreenInfoSource); + + // usage info + m_userFeedbackProvider.addDataSource(new KUserFeedback::StartCountSource); + m_userFeedbackProvider.addDataSource(new KUserFeedback::UsageTimeSource); +#endif + //restore the geometry KConfigGroup group = KSharedConfig::openConfig()->group("MainWin"); restoreGeometry(group.readEntry("geometry", QByteArray())); } MainWin::~MainWin() { //save the recent opened files m_recentProjectsAction->saveEntries( KSharedConfig::openConfig()->group("Recent Files") ); KConfigGroup group = KSharedConfig::openConfig()->group("MainWin"); group.writeEntry("geometry", saveGeometry()); KSharedConfig::openConfig()->sync(); //if welcome screen is shown, save its settings prior to deleting it if(dynamic_cast(centralWidget())) QMetaObject::invokeMethod(m_welcomeWidget->rootObject(), "saveWidgetDimensions"); if (m_project) { if(dynamic_cast(centralWidget()) == nullptr) m_mdiArea->closeAllSubWindows(); disconnect(m_project, nullptr, this, nullptr); delete m_project; } if (m_aspectTreeModel) delete m_aspectTreeModel; if (m_guiObserver) delete m_guiObserver; if(m_welcomeScreenHelper) delete m_welcomeScreenHelper; } void MainWin::showPresenter() { const Worksheet* w = dynamic_cast(m_currentAspect); if (w) { auto* view = dynamic_cast(w->view()); view->presenterMode(); } else { //currently active object is not a worksheet but we're asked to start in the presenter mode //determine the first available worksheet and show it in the presenter mode QVector worksheets = m_project->children(); if (worksheets.size() > 0) { auto* view = qobject_cast(worksheets.first()->view()); view->presenterMode(); } else { QMessageBox::information(this, i18n("Presenter Mode"), i18n("No worksheets are available in the project. The presenter mode will not be started.")); } } } AspectTreeModel* MainWin::model() const { return m_aspectTreeModel; } Project* MainWin::project() const { return m_project; } void MainWin::initGUI(const QString& fileName) { statusBar()->showMessage(i18nc("%1 is the LabPlot version", "Welcome to LabPlot %1", QLatin1String(LVERSION))); initActions(); #ifdef Q_OS_MAC setupGUI(Default, QLatin1String("/Applications/labplot2.app/Contents/Resources/labplot2ui.rc")); m_touchBar = new KDMacTouchBar(this); //m_touchBar->setTouchButtonStyle(KDMacTouchBar::IconOnly); #else setupGUI(Default, KXMLGUIClient::xmlFile()); // should be "labplot2ui.rc" #endif DEBUG("Component name: " << KXMLGUIClient::componentName().toStdString()); DEBUG("XML file: " << KXMLGUIClient::xmlFile().toStdString() << " (should be \"labplot2ui.rc\")"); //all toolbars created via the KXMLGUI framework are locked on default: // * on the very first program start, unlock all toolbars // * on later program starts, set stored lock status //Furthermore, we want to show icons only after the first program start. KConfigGroup groupMain = KSharedConfig::openConfig()->group("MainWindow"); if (groupMain.exists()) { //KXMLGUI framework automatically stores "Disabled" for the key "ToolBarsMovable" //in case the toolbars are locked -> load this value const QString& str = groupMain.readEntry(QLatin1String("ToolBarsMovable"), ""); bool locked = (str == QLatin1String("Disabled")); KToolBar::setToolBarsLocked(locked); } else { //first start KToolBar::setToolBarsLocked(false); //show icons only for (auto* container : factory()->containers(QLatin1String("ToolBar"))) { auto* toolbar = dynamic_cast(container); if (toolbar) toolbar->setToolButtonStyle(Qt::ToolButtonIconOnly); } } initMenus(); auto* mainToolBar = qobject_cast(factory()->container("main_toolbar", this)); if (!mainToolBar) { QMessageBox::critical(this, i18n("GUI configuration file not found"), i18n("%1 file was not found. Please check your installation.", KXMLGUIClient::xmlFile())); //TODO: the application is not really usable if the rc file was not found. We should quit the application. The following line crashes //the application because of the splash screen. We need to find another solution. // QMetaObject::invokeMethod(this, "close", Qt::QueuedConnection); //call close as soon as we enter the eventloop return; } auto* tbImport = new QToolButton(mainToolBar); tbImport->setPopupMode(QToolButton::MenuButtonPopup); tbImport->setMenu(m_importMenu); tbImport->setDefaultAction(m_importFileAction); mainToolBar->addWidget(tbImport); qobject_cast(factory()->container("import", this))->setIcon(QIcon::fromTheme("document-import")); setWindowIcon(QIcon::fromTheme("LabPlot2", QGuiApplication::windowIcon())); setAttribute( Qt::WA_DeleteOnClose ); //make the status bar of a fixed size in order to avoid height changes when placing a ProgressBar there. QFont font; font.setFamily(font.defaultFamily()); QFontMetrics fm(font); statusBar()->setFixedHeight(fm.height() + 5); //load recently used projects m_recentProjectsAction->loadEntries( KSharedConfig::openConfig()->group("Recent Files") ); //auto-save KConfigGroup group = KSharedConfig::openConfig()->group("Settings_General"); m_autoSaveActive = group.readEntry("AutoSave", false); int interval = group.readEntry("AutoSaveInterval", 1); interval = interval*60*1000; m_autoSaveTimer.setInterval(interval); connect(&m_autoSaveTimer, &QTimer::timeout, this, &MainWin::autoSaveProject); if (!fileName.isEmpty()) { #ifdef HAVE_LIBORIGIN if (Project::isLabPlotProject(fileName) || OriginProjectParser::isOriginProject(fileName)) { #else if (Project::isLabPlotProject(fileName)) { #endif QTimer::singleShot(0, this, [=] () { openProject(fileName); }); } else { newProject(); QTimer::singleShot(0, this, [=] () { importFileDialog(fileName); }); } } else { //There is no file to open. Depending on the settings do nothing, //create a new project or open the last used project. LoadOnStart load = (LoadOnStart)group.readEntry("LoadOnStart", (int)Nothing); if (load != WelcomeScreen) { createMdiArea(); setCentralWidget(m_mdiArea); if (load == NewProject) //create new project newProject(); else if (load == NewProjectWorksheet) { //create new project with a worksheet newProject(); newWorksheet(); } else if (load == LastProject) { //open last used project if (!m_recentProjectsAction->urls().isEmpty()) { QDEBUG("TO OPEN m_recentProjectsAction->urls() =" << m_recentProjectsAction->urls().constFirst()); openRecentProject( m_recentProjectsAction->urls().constFirst() ); } } updateGUIOnProjectChanges(); } else{ //welcome screen m_showWelcomeScreen = true; m_welcomeWidget = createWelcomeScreen(); setCentralWidget(m_welcomeWidget); } } //show memory info const bool showMemoryInfo = group.readEntry(QLatin1String("ShowMemoryInfo"), true); if (showMemoryInfo) { m_memoryInfoWidget = new MemoryWidget(statusBar()); statusBar()->addPermanentWidget(m_memoryInfoWidget); } } /** * @brief Creates a new welcome screen to be set as central widget. */ QQuickWidget* MainWin::createWelcomeScreen() { QSize maxSize = qApp->primaryScreen()->availableSize(); resize(maxSize); setMinimumSize(700, 400); showMaximized(); KToolBar* toolbar = toolBar(); if(toolbar) toolbar->setVisible(false); QList recentList; for (QUrl url : m_recentProjectsAction->urls()) recentList.append(QVariant(url)); //Set context property QQuickWidget* quickWidget = new QQuickWidget(this); QQmlContext *ctxt = quickWidget->rootContext(); QVariant variant(recentList); ctxt->setContextProperty("recentProjects", variant); //Create helper object if(m_welcomeScreenHelper) delete m_welcomeScreenHelper; m_welcomeScreenHelper = new WelcomeScreenHelper(); connect(m_welcomeScreenHelper, SIGNAL(openExampleProject(QString)), this, SLOT(openProject(const QString& ))); ctxt->setContextProperty("datasetModel", m_welcomeScreenHelper->getDatasetModel()); ctxt->setContextProperty("helper", m_welcomeScreenHelper); quickWidget->setSource(QUrl(QLatin1String("qrc:///main.qml"))); quickWidget->setResizeMode(QQuickWidget::SizeRootObjectToView); QObject *item = quickWidget->rootObject(); //connect qml's signals QObject::connect(item, SIGNAL(recentProjectClicked(QUrl)), this, SLOT(openRecentProject(QUrl))); QObject::connect(item, SIGNAL(datasetClicked(QString, QString, QString)), m_welcomeScreenHelper, SLOT(datasetClicked(const QString&, const QString&, const QString&))); QObject::connect(item, SIGNAL(openDataset()), this, SLOT(openDatasetExample())); QObject::connect(item, SIGNAL(openExampleProject(QString)), m_welcomeScreenHelper, SLOT(exampleProjectClicked(const QString&))); m_welcomeScreenHelper->showFirstDataset(); return quickWidget; } /** * @brief Initiates resetting the layout of the welcome screen */ void MainWin::resetWelcomeScreen() { if(dynamic_cast(centralWidget())) QMetaObject::invokeMethod(m_welcomeWidget->rootObject(), "restoreOriginalLayout"); } /** * @brief Creates a new MDI area, to replace the Welcome Screen as central widget */ void MainWin::createMdiArea() { KToolBar* toolbar = toolBar(); if(toolbar) toolbar->setVisible(true); //Save welcome screen's dimensions. if(m_showWelcomeScreen) QMetaObject::invokeMethod(m_welcomeWidget->rootObject(), "saveWidgetDimensions"); m_mdiArea = new QMdiArea; setCentralWidget(m_mdiArea); connect(m_mdiArea, &QMdiArea::subWindowActivated, this, &MainWin::handleCurrentSubWindowChanged); //set the view mode of the mdi area KConfigGroup group = KSharedConfig::openConfig()->group( "Settings_General" ); int viewMode = group.readEntry("ViewMode", 0); if (viewMode == 1) { m_mdiArea->setViewMode(QMdiArea::TabbedView); int tabPosition = group.readEntry("TabPosition", 0); m_mdiArea->setTabPosition(QTabWidget::TabPosition(tabPosition)); m_mdiArea->setTabsClosable(true); m_mdiArea->setTabsMovable(true); m_tileWindowsAction->setVisible(false); m_cascadeWindowsAction->setVisible(false); } connect(m_closeWindowAction, &QAction::triggered, m_mdiArea, &QMdiArea::closeActiveSubWindow); connect(m_closeAllWindowsAction, &QAction::triggered, m_mdiArea, &QMdiArea::closeAllSubWindows); connect(m_tileWindowsAction, &QAction::triggered, m_mdiArea, &QMdiArea::tileSubWindows); connect(m_cascadeWindowsAction, &QAction::triggered, m_mdiArea, &QMdiArea::cascadeSubWindows); connect(m_nextWindowAction, &QAction::triggered, m_mdiArea, &QMdiArea::activateNextSubWindow); connect(m_prevWindowAction, &QAction::triggered, m_mdiArea, &QMdiArea::activatePreviousSubWindow); } void MainWin::initActions() { // ******************** File-menu ******************************* //add some standard actions m_newProjectAction = KStandardAction::openNew(this, SLOT(newProject()),actionCollection()); m_openProjectAction = KStandardAction::open(this, SLOT(openProject()),actionCollection()); m_recentProjectsAction = KStandardAction::openRecent(this, SLOT(openRecentProject(QUrl)),actionCollection()); m_closeAction = KStandardAction::close(this, SLOT(closeProject()),actionCollection()); actionCollection()->setDefaultShortcut(m_closeAction, QKeySequence()); //remove the shortcut, QKeySequence::Close will be used for closing sub-windows m_saveAction = KStandardAction::save(this, SLOT(saveProject()),actionCollection()); m_saveAsAction = KStandardAction::saveAs(this, SLOT(saveProjectAs()),actionCollection()); m_printAction = KStandardAction::print(this, SLOT(print()),actionCollection()); m_printPreviewAction = KStandardAction::printPreview(this, SLOT(printPreview()),actionCollection()); //TODO: on Mac OS when going full-screen we get a crash because of an stack-overflow #ifndef Q_OS_MAC KStandardAction::fullScreen(this, SLOT(toggleFullScreen()), this, actionCollection()); #endif //New Folder/Workbook/Spreadsheet/Matrix/Worksheet/Datasources m_newWorkbookAction = new QAction(QIcon::fromTheme("labplot-workbook-new"),i18n("Workbook"),this); actionCollection()->addAction("new_workbook", m_newWorkbookAction); m_newWorkbookAction->setWhatsThis(i18n("Creates a new workbook for collection spreadsheets, matrices and plots")); connect(m_newWorkbookAction, &QAction::triggered, this, &MainWin::newWorkbook); m_newDatapickerAction = new QAction(QIcon::fromTheme("color-picker-black"), i18n("Datapicker"), this); m_newDatapickerAction->setWhatsThis(i18n("Creates a data picker for getting data from a picture")); actionCollection()->addAction("new_datapicker", m_newDatapickerAction); connect(m_newDatapickerAction, &QAction::triggered, this, &MainWin::newDatapicker); m_newSpreadsheetAction = new QAction(QIcon::fromTheme("labplot-spreadsheet-new"),i18n("Spreadsheet"),this); // m_newSpreadsheetAction->setShortcut(Qt::CTRL+Qt::Key_Equal); m_newSpreadsheetAction->setWhatsThis(i18n("Creates a new spreadsheet for data editing")); actionCollection()->addAction("new_spreadsheet", m_newSpreadsheetAction); connect(m_newSpreadsheetAction, &QAction::triggered, this, &MainWin::newSpreadsheet); m_newMatrixAction = new QAction(QIcon::fromTheme("labplot-matrix-new"),i18n("Matrix"),this); // m_newMatrixAction->setShortcut(Qt::CTRL+Qt::Key_Equal); m_newMatrixAction->setWhatsThis(i18n("Creates a new matrix for data editing")); actionCollection()->addAction("new_matrix", m_newMatrixAction); connect(m_newMatrixAction, &QAction::triggered, this, &MainWin::newMatrix); m_newWorksheetAction = new QAction(QIcon::fromTheme("labplot-worksheet-new"),i18n("Worksheet"),this); // m_newWorksheetAction->setShortcut(Qt::ALT+Qt::Key_X); m_newWorksheetAction->setWhatsThis(i18n("Creates a new worksheet for data plotting")); actionCollection()->addAction("new_worksheet", m_newWorksheetAction); connect(m_newWorksheetAction, &QAction::triggered, this, &MainWin::newWorksheet); m_newNotesAction = new QAction(QIcon::fromTheme("document-new"),i18n("Note"),this); m_newNotesAction->setWhatsThis(i18n("Creates a new note for arbitrary text")); actionCollection()->addAction("new_notes", m_newNotesAction); connect(m_newNotesAction, &QAction::triggered, this, &MainWin::newNotes); // m_newScriptAction = new QAction(QIcon::fromTheme("insert-text"),i18n("Note/Script"),this); // actionCollection()->addAction("new_script", m_newScriptAction); // connect(m_newScriptAction, &QAction::triggered,SLOT(newScript())); m_newFolderAction = new QAction(QIcon::fromTheme("folder-new"),i18n("Folder"),this); m_newFolderAction->setWhatsThis(i18n("Creates a new folder to collect sheets and other elements")); actionCollection()->addAction("new_folder", m_newFolderAction); connect(m_newFolderAction, &QAction::triggered, this, &MainWin::newFolder); //"New file datasources" m_newLiveDataSourceAction = new QAction(QIcon::fromTheme("application-octet-stream"),i18n("Live Data Source"),this); m_newLiveDataSourceAction->setWhatsThis(i18n("Creates a live data source to read data from a real time device")); actionCollection()->addAction("new_live_datasource", m_newLiveDataSourceAction); connect(m_newLiveDataSourceAction, &QAction::triggered, this, &MainWin::newLiveDataSourceActionTriggered); //Import/Export m_importFileAction = new QAction(QIcon::fromTheme("document-import"), i18n("Import from File"), this); actionCollection()->setDefaultShortcut(m_importFileAction, Qt::CTRL+Qt::SHIFT+Qt::Key_I); m_importFileAction->setWhatsThis(i18n("Import data from a regular file")); actionCollection()->addAction("import_file", m_importFileAction); connect(m_importFileAction, &QAction::triggered, this, [=]() {importFileDialog();}); m_importSqlAction = new QAction(QIcon::fromTheme("network-server-database"), i18n("From SQL Database"), this); m_importSqlAction->setWhatsThis(i18n("Import data from a SQL database")); actionCollection()->addAction("import_sql", m_importSqlAction); connect(m_importSqlAction, &QAction::triggered, this, &MainWin::importSqlDialog); m_importDatasetAction = new QAction(QIcon::fromTheme(QLatin1String("database-index")), i18n("From Dataset Collection"), this); m_importDatasetAction->setWhatsThis(i18n("Imports data from an online dataset")); actionCollection()->addAction("import_dataset_datasource", m_importDatasetAction); connect(m_importDatasetAction, &QAction::triggered, this, &MainWin::importDatasetDialog); m_importLabPlotAction = new QAction(QIcon::fromTheme("project-open"), i18n("LabPlot Project"), this); m_importLabPlotAction->setWhatsThis(i18n("Import a project from a LabPlot project file (.lml)")); actionCollection()->addAction("import_labplot", m_importLabPlotAction); connect(m_importLabPlotAction, &QAction::triggered, this, &MainWin::importProjectDialog); #ifdef HAVE_LIBORIGIN m_importOpjAction = new QAction(QIcon::fromTheme("project-open"), i18n("Origin Project (OPJ)"), this); m_importOpjAction->setWhatsThis(i18n("Import a project from an OriginLab Origin project file (.opj)")); actionCollection()->addAction("import_opj", m_importOpjAction); connect(m_importOpjAction, &QAction::triggered, this, &MainWin::importProjectDialog); #endif m_exportAction = new QAction(QIcon::fromTheme("document-export"), i18n("Export"), this); m_exportAction->setWhatsThis(i18n("Export selected element")); actionCollection()->setDefaultShortcut(m_exportAction, Qt::CTRL+Qt::SHIFT+Qt::Key_E); actionCollection()->addAction("export", m_exportAction); connect(m_exportAction, &QAction::triggered, this, &MainWin::exportDialog); m_editFitsFileAction = new QAction(QIcon::fromTheme("editor"), i18n("FITS Metadata Editor"), this); m_editFitsFileAction->setWhatsThis(i18n("Open editor to edit FITS meta data")); actionCollection()->addAction("edit_fits", m_editFitsFileAction); connect(m_editFitsFileAction, &QAction::triggered, this, &MainWin::editFitsFileDialog); // Edit //Undo/Redo-stuff m_undoAction = KStandardAction::undo(this, SLOT(undo()), actionCollection()); m_redoAction = KStandardAction::redo(this, SLOT(redo()), actionCollection()); m_historyAction = new QAction(QIcon::fromTheme("view-history"), i18n("Undo/Redo History"),this); actionCollection()->addAction("history", m_historyAction); connect(m_historyAction, &QAction::triggered, this, &MainWin::historyDialog); // TODO: more menus // Appearance // Analysis: see WorksheetView.cpp // Drawing // Script //Windows m_closeWindowAction = new QAction(i18n("&Close"), this); actionCollection()->setDefaultShortcut(m_closeWindowAction, QKeySequence::Close); m_closeWindowAction->setStatusTip(i18n("Close the active window")); actionCollection()->addAction("close window", m_closeWindowAction); m_closeAllWindowsAction = new QAction(i18n("Close &All"), this); m_closeAllWindowsAction->setStatusTip(i18n("Close all the windows")); actionCollection()->addAction("close all windows", m_closeAllWindowsAction); m_tileWindowsAction = new QAction(i18n("&Tile"), this); m_tileWindowsAction->setStatusTip(i18n("Tile the windows")); actionCollection()->addAction("tile windows", m_tileWindowsAction); m_cascadeWindowsAction = new QAction(i18n("&Cascade"), this); m_cascadeWindowsAction->setStatusTip(i18n("Cascade the windows")); actionCollection()->addAction("cascade windows", m_cascadeWindowsAction); m_nextWindowAction = new QAction(QIcon::fromTheme("go-next-view"), i18n("Ne&xt"), this); actionCollection()->setDefaultShortcut(m_nextWindowAction, QKeySequence::NextChild); m_nextWindowAction->setStatusTip(i18n("Move the focus to the next window")); actionCollection()->addAction("next window", m_nextWindowAction); m_prevWindowAction = new QAction(QIcon::fromTheme("go-previous-view"), i18n("Pre&vious"), this); actionCollection()->setDefaultShortcut(m_prevWindowAction, QKeySequence::PreviousChild); m_prevWindowAction->setStatusTip(i18n("Move the focus to the previous window")); actionCollection()->addAction("previous window", m_prevWindowAction); //"Standard actions" KStandardAction::preferences(this, SLOT(settingsDialog()), actionCollection()); KStandardAction::quit(this, SLOT(close()), actionCollection()); //Actions for window visibility auto* windowVisibilityActions = new QActionGroup(this); windowVisibilityActions->setExclusive(true); m_visibilityFolderAction = new QAction(QIcon::fromTheme("folder"), i18n("Current &Folder Only"), windowVisibilityActions); m_visibilityFolderAction->setCheckable(true); m_visibilityFolderAction->setData(Project::folderOnly); m_visibilitySubfolderAction = new QAction(QIcon::fromTheme("folder-documents"), i18n("Current Folder and &Subfolders"), windowVisibilityActions); m_visibilitySubfolderAction->setCheckable(true); m_visibilitySubfolderAction->setData(Project::folderAndSubfolders); m_visibilityAllAction = new QAction(i18n("&All"), windowVisibilityActions); m_visibilityAllAction->setCheckable(true); m_visibilityAllAction->setData(Project::allMdiWindows); connect(windowVisibilityActions, &QActionGroup::triggered, this, &MainWin::setMdiWindowVisibility); //Actions for hiding/showing the dock widgets auto* docksActions = new QActionGroup(this); docksActions->setExclusive(false); m_toggleProjectExplorerDockAction = new QAction(QIcon::fromTheme("view-list-tree"), i18n("Project Explorer"), docksActions); m_toggleProjectExplorerDockAction->setCheckable(true); m_toggleProjectExplorerDockAction->setChecked(true); actionCollection()->addAction("toggle_project_explorer_dock", m_toggleProjectExplorerDockAction); m_togglePropertiesDockAction = new QAction(QIcon::fromTheme("view-list-details"), i18n("Properties Explorer"), docksActions); m_togglePropertiesDockAction->setCheckable(true); m_togglePropertiesDockAction->setChecked(true); actionCollection()->addAction("toggle_properties_explorer_dock", m_togglePropertiesDockAction); connect(docksActions, &QActionGroup::triggered, this, &MainWin::toggleDockWidget); //global search QAction* searchAction = new QAction(actionCollection()); searchAction->setShortcut(QKeySequence::Find); connect(searchAction, &QAction::triggered, this, [=]() { if (m_project) { if (!m_projectExplorerDock->isVisible()) { m_toggleProjectExplorerDockAction->setChecked(true); toggleDockWidget(m_toggleProjectExplorerDockAction); } m_projectExplorer->search(); } }); this->addAction(searchAction); } void MainWin::initMenus() { //menu in the main toolbar for adding new aspects auto* menu = dynamic_cast(factory()->container("new", this)); menu->setIcon(QIcon::fromTheme("window-new")); //menu in the project explorer and in the toolbar for adding new aspects m_newMenu = new QMenu(i18n("Add New"), this); m_newMenu->setIcon(QIcon::fromTheme("window-new")); m_newMenu->addAction(m_newFolderAction); m_newMenu->addAction(m_newWorkbookAction); m_newMenu->addAction(m_newSpreadsheetAction); m_newMenu->addAction(m_newMatrixAction); m_newMenu->addAction(m_newWorksheetAction); m_newMenu->addAction(m_newNotesAction); m_newMenu->addAction(m_newDatapickerAction); m_newMenu->addSeparator(); m_newMenu->addAction(m_newLiveDataSourceAction); //import menu m_importMenu = new QMenu(this); m_importMenu->setIcon(QIcon::fromTheme("document-import")); m_importMenu ->addAction(m_importFileAction); m_importMenu ->addAction(m_importSqlAction); m_importMenu->addAction(m_importDatasetAction); m_importMenu->addSeparator(); m_importMenu->addAction(m_importLabPlotAction); #ifdef HAVE_LIBORIGIN m_importMenu ->addAction(m_importOpjAction); #endif #ifdef HAVE_CANTOR_LIBS m_newMenu->addSeparator(); m_newCantorWorksheetMenu = new QMenu(i18n("CAS Worksheet"), this); m_newCantorWorksheetMenu->setIcon(QIcon::fromTheme("archive-insert")); //"Adding Cantor backends to menu and context menu" QStringList m_availableBackend = Cantor::Backend::listAvailableBackends(); if (m_availableBackend.count() > 0) { unplugActionList(QLatin1String("backends_list")); QList newBackendActions; for (Cantor::Backend* backend : Cantor::Backend::availableBackends()) { if (!backend->isEnabled()) continue; QAction* action = new QAction(QIcon::fromTheme(backend->icon()), backend->name(),this); action->setData(backend->name()); newBackendActions << action; m_newCantorWorksheetMenu->addAction(action); } connect(m_newCantorWorksheetMenu, &QMenu::triggered, this, &MainWin::newCantorWorksheet); plugActionList(QLatin1String("backends_list"), newBackendActions); } m_newMenu->addMenu(m_newCantorWorksheetMenu); #else delete this->guiFactory()->container("cas_worksheet", this); delete this->guiFactory()->container("new_cas_worksheet", this); delete this->guiFactory()->container("cas_worksheet_toolbar", this); #endif //menu subwindow visibility policy m_visibilityMenu = new QMenu(i18n("Window Visibility Policy"), this); m_visibilityMenu->setIcon(QIcon::fromTheme("window-duplicate")); m_visibilityMenu ->addAction(m_visibilityFolderAction); m_visibilityMenu ->addAction(m_visibilitySubfolderAction); m_visibilityMenu ->addAction(m_visibilityAllAction); //menu for editing files m_editMenu = new QMenu(i18n("Edit"), this); m_editMenu->addAction(m_editFitsFileAction); KActionMenu* schemesMenu = m_schemeManager->createSchemeSelectionMenu(i18n("Color Scheme"), QString(), this); schemesMenu->setIcon(QIcon::fromTheme(QStringLiteral("preferences-desktop-color"))); QMenu* settingsMenu = dynamic_cast(factory()->container("settings", this)); if (settingsMenu) settingsMenu->insertMenu(settingsMenu->actions().constFirst(), schemesMenu->menu()); //set the action for the current color scheme checked KConfigGroup generalGlobalsGroup = KSharedConfig::openConfig(QLatin1String("kdeglobals"))->group("General"); QString defaultSchemeName = generalGlobalsGroup.readEntry("ColorScheme", QStringLiteral("Breeze")); KConfigGroup group = KSharedConfig::openConfig()->group(QLatin1String("Settings_General")); QString schemeName = group.readEntry("ColorScheme", defaultSchemeName); for (auto* action : schemesMenu->menu()->actions()) { if (action->text() == schemeName) { action->setChecked(true); break; } } connect(schemesMenu->menu(), &QMenu::triggered, this, &MainWin::colorSchemeChanged); #ifdef HAVE_CANTOR_LIBS QAction* action = new QAction(QIcon::fromTheme(QLatin1String("cantor")), i18n("Configure CAS"), this); connect(action, &QAction::triggered, this, &MainWin::cantorSettingsDialog); if (settingsMenu) settingsMenu->addAction(action); #endif } void MainWin::colorSchemeChanged(QAction* action) { QString schemeName = KLocalizedString::removeAcceleratorMarker(action->text()); //background of the mdi area is not updated on theme changes, do it here. QModelIndex index = m_schemeManager->indexForScheme(schemeName); const QPalette& palette = KColorScheme::createApplicationPalette( KSharedConfig::openConfig(index.data(Qt::UserRole).toString()) ); const QBrush& brush = palette.brush(QPalette::Dark); m_mdiArea->setBackground(brush); //save the selected color scheme KConfigGroup group = KSharedConfig::openConfig()->group(QLatin1String("Settings_General")); group.writeEntry("ColorScheme", schemeName); group.sync(); } /*! Asks to save the project if it was modified. \return \c true if the project still needs to be saved ("cancel" clicked), \c false otherwise. */ bool MainWin::warnModified() { if (m_project->hasChanged()) { int want_save = KMessageBox::warningYesNoCancel( this, i18n("The current project %1 has been modified. Do you want to save it?", m_project->name()), i18n("Save Project")); switch (want_save) { case KMessageBox::Yes: return !saveProject(); case KMessageBox::No: break; case KMessageBox::Cancel: return true; } } return false; } /*! * updates the state of actions, menus and toolbars (enabled or disabled) * on project changes (project closes and opens) */ void MainWin::updateGUIOnProjectChanges() { if (m_closing) return; KXMLGUIFactory* factory = this->guiFactory(); if (factory->container("worksheet", this) == nullptr) { //no worksheet menu found, most probably labplot2ui.rc //was not properly installed -> return here in order not to crash return; } //disable all menus if there is no project bool b = (m_project == nullptr); m_saveAction->setEnabled(!b); m_saveAsAction->setEnabled(!b); m_printAction->setEnabled(!b); m_printPreviewAction->setEnabled(!b); m_importFileAction->setEnabled(!b); m_importSqlAction->setEnabled(!b); #ifdef HAVE_LIBORIGIN m_importOpjAction->setEnabled(!b); #endif m_exportAction->setEnabled(!b); m_newWorkbookAction->setEnabled(!b); m_newSpreadsheetAction->setEnabled(!b); m_newMatrixAction->setEnabled(!b); m_newWorksheetAction->setEnabled(!b); m_newDatapickerAction->setEnabled(!b); m_closeAction->setEnabled(!b); m_toggleProjectExplorerDockAction->setEnabled(!b); m_togglePropertiesDockAction->setEnabled(!b); if (!m_mdiArea->currentSubWindow()) { factory->container("spreadsheet", this)->setEnabled(false); factory->container("matrix", this)->setEnabled(false); factory->container("worksheet", this)->setEnabled(false); factory->container("analysis", this)->setEnabled(false); factory->container("datapicker", this)->setEnabled(false); factory->container("spreadsheet_toolbar", this)->hide(); factory->container("worksheet_toolbar", this)->hide(); factory->container("cartesian_plot_toolbar", this)->hide(); // factory->container("histogram_toolbar",this)->hide(); // factory->container("barchart_toolbar",this)->hide(); factory->container("datapicker_toolbar", this)->hide(); #ifdef HAVE_CANTOR_LIBS factory->container("cas_worksheet", this)->setEnabled(false); factory->container("cas_worksheet_toolbar", this)->hide(); #endif } factory->container("new", this)->setEnabled(!b); factory->container("edit", this)->setEnabled(!b); factory->container("import", this)->setEnabled(!b); if (b) setCaption("LabPlot2"); else setCaption(m_project->name()); #ifdef Q_OS_MAC m_touchBar->clear(); if (b){ m_touchBar->addAction(m_newProjectAction); m_touchBar->addAction(m_openProjectAction); } else { m_touchBar->addAction(m_importFileAction); m_touchBar->addAction(m_newWorksheetAction); m_touchBar->addAction(m_newSpreadsheetAction); } #endif // undo/redo actions are disabled in both cases - when the project is closed or opened m_undoAction->setEnabled(false); m_redoAction->setEnabled(false); } /* * updates the state of actions, menus and toolbars (enabled or disabled) * depending on the currently active window (worksheet or spreadsheet). */ void MainWin::updateGUI() { if (m_project == nullptr || m_project->isLoading()) return; if (m_closing || m_projectClosing) return; KXMLGUIFactory* factory = this->guiFactory(); if (factory->container("worksheet", this) == nullptr) { //no worksheet menu found, most probably labplot2ui.rc //was not properly installed -> return here in order not to crash return; } //reset the touchbar #ifdef Q_OS_MAC m_touchBar->clear(); m_touchBar->addAction(m_undoAction); m_touchBar->addAction(m_redoAction); m_touchBar->addSeparator(); #endif if (!m_mdiArea->currentSubWindow()) { factory->container("spreadsheet", this)->setEnabled(false); factory->container("matrix", this)->setEnabled(false); factory->container("worksheet", this)->setEnabled(false); factory->container("analysis", this)->setEnabled(false); factory->container("datapicker", this)->setEnabled(false); factory->container("spreadsheet_toolbar", this)->hide(); factory->container("worksheet_toolbar", this)->hide(); // factory->container("histogram_toolbar",this)->hide(); // factory->container("barchart_toolbar",this)->hide(); factory->container("cartesian_plot_toolbar", this)->hide(); factory->container("datapicker_toolbar", this)->hide(); #ifdef HAVE_CANTOR_LIBS factory->container("cas_worksheet", this)->setEnabled(false); factory->container("cas_worksheet_toolbar", this)->hide(); #endif return; } #ifdef Q_OS_MAC if (dynamic_cast(m_currentAspect)) { //if (m_currentAspect->type() == AspectType::Folder) { m_touchBar->addAction(m_newWorksheetAction); m_touchBar->addAction(m_newSpreadsheetAction); m_touchBar->addAction(m_newMatrixAction); } #endif //Handle the Worksheet-object const Worksheet* w = dynamic_cast(m_currentAspect); if (!w) w = dynamic_cast(m_currentAspect->parent(AspectType::Worksheet)); if (w) { //populate worksheet menu auto* view = qobject_cast(w->view()); auto* menu = qobject_cast(factory->container("worksheet", this)); menu->clear(); view->createContextMenu(menu); menu->setEnabled(true); //populate analysis menu menu = qobject_cast(factory->container("analysis", this)); menu->clear(); view->createAnalysisMenu(menu); menu->setEnabled(true); //populate worksheet-toolbar auto* toolbar = qobject_cast(factory->container("worksheet_toolbar", this)); toolbar->clear(); view->fillToolBar(toolbar); toolbar->setVisible(true); toolbar->setEnabled(true); //populate the toolbar for cartesian plots toolbar = qobject_cast(factory->container("cartesian_plot_toolbar", this)); toolbar->clear(); view->fillCartesianPlotToolBar(toolbar); toolbar->setVisible(true); toolbar->setEnabled(true); //populate the touchbar on Mac #ifdef Q_OS_MAC view->fillTouchBar(m_touchBar); #endif //hide the spreadsheet toolbar factory->container("spreadsheet_toolbar", this)->setVisible(false); } else { factory->container("worksheet", this)->setEnabled(false); factory->container("worksheet_toolbar", this)->setVisible(false); factory->container("analysis", this)->setEnabled(false); // factory->container("drawing", this)->setEnabled(false); factory->container("worksheet_toolbar", this)->setEnabled(false); factory->container("cartesian_plot_toolbar", this)->setEnabled(false); } //Handle the Spreadsheet-object const auto* spreadsheet = this->activeSpreadsheet(); if (!spreadsheet) spreadsheet = dynamic_cast(m_currentAspect->parent(AspectType::Spreadsheet)); if (spreadsheet) { //populate spreadsheet-menu auto* view = qobject_cast(spreadsheet->view()); auto* menu = qobject_cast(factory->container("spreadsheet", this)); menu->clear(); view->createContextMenu(menu); menu->setEnabled(true); //populate spreadsheet-toolbar auto* toolbar = qobject_cast(factory->container("spreadsheet_toolbar", this)); toolbar->clear(); view->fillToolBar(toolbar); toolbar->setVisible(true); toolbar->setEnabled(true); //populate the touchbar on Mac #ifdef Q_OS_MAC m_touchBar->addAction(m_importFileAction); view->fillTouchBar(m_touchBar); #endif } else { factory->container("spreadsheet", this)->setEnabled(false); factory->container("spreadsheet_toolbar", this)->setVisible(false); } //Handle the Matrix-object const Matrix* matrix = dynamic_cast(m_currentAspect); if (!matrix) matrix = dynamic_cast(m_currentAspect->parent(AspectType::Matrix)); if (matrix) { //populate matrix-menu auto* view = qobject_cast(matrix->view()); auto* menu = qobject_cast(factory->container("matrix", this)); menu->clear(); view->createContextMenu(menu); menu->setEnabled(true); //populate the touchbar on Mac #ifdef Q_OS_MAC m_touchBar->addAction(m_importFileAction); //view->fillTouchBar(m_touchBar); #endif } else factory->container("matrix", this)->setEnabled(false); #ifdef HAVE_CANTOR_LIBS const CantorWorksheet* cantorworksheet = dynamic_cast(m_currentAspect); if (!cantorworksheet) cantorworksheet = dynamic_cast(m_currentAspect->parent(AspectType::CantorWorksheet)); if (cantorworksheet) { auto* view = qobject_cast(cantorworksheet->view()); auto* menu = qobject_cast(factory->container("cas_worksheet", this)); menu->clear(); view->createContextMenu(menu); menu->setEnabled(true); auto* toolbar = qobject_cast(factory->container("cas_worksheet_toolbar", this)); toolbar->setVisible(true); toolbar->clear(); view->fillToolBar(toolbar); } else { //no Cantor worksheet selected -> deactivate Cantor worksheet related menu and toolbar factory->container("cas_worksheet", this)->setEnabled(false); factory->container("cas_worksheet_toolbar", this)->setVisible(false); } #endif const Datapicker* datapicker = dynamic_cast(m_currentAspect); if (!datapicker) datapicker = dynamic_cast(m_currentAspect->parent(AspectType::Datapicker)); if (!datapicker) { if (m_currentAspect->type() == AspectType::DatapickerCurve) datapicker = dynamic_cast(m_currentAspect->parentAspect()); } if (datapicker) { //populate datapicker-menu auto* view = qobject_cast(datapicker->view()); auto* menu = qobject_cast(factory->container("datapicker", this)); menu->clear(); view->createContextMenu(menu); menu->setEnabled(true); //populate spreadsheet-toolbar auto* toolbar = qobject_cast(factory->container("datapicker_toolbar", this)); toolbar->clear(); view->fillToolBar(toolbar); toolbar->setVisible(true); } else { factory->container("datapicker", this)->setEnabled(false); factory->container("datapicker_toolbar", this)->setVisible(false); } } /*! creates a new empty project. Returns \c true, if a new project was created. */ bool MainWin::newProject() { //close the current project, if available if (!closeProject()) return false; if(dynamic_cast(centralWidget())) { createMdiArea(); setCentralWidget(m_mdiArea); } QApplication::processEvents(QEventLoop::AllEvents, 100); if (m_project) delete m_project; if (m_aspectTreeModel) delete m_aspectTreeModel; m_project = new Project(); m_currentAspect = m_project; m_currentFolder = m_project; KConfigGroup group = KSharedConfig::openConfig()->group( "Settings_General" ); Project::MdiWindowVisibility vis = Project::MdiWindowVisibility(group.readEntry("MdiWindowVisibility", 0)); m_project->setMdiWindowVisibility( vis ); if (vis == Project::folderOnly) m_visibilityFolderAction->setChecked(true); else if (vis == Project::folderAndSubfolders) m_visibilitySubfolderAction->setChecked(true); else m_visibilityAllAction->setChecked(true); m_aspectTreeModel = new AspectTreeModel(m_project, this); connect(m_aspectTreeModel, &AspectTreeModel::statusInfo, [=](const QString& text){ statusBar()->showMessage(text); }); //newProject is called for the first time, there is no project explorer yet //-> initialize the project explorer, the GUI-observer and the dock widgets. if (m_projectExplorer == nullptr) { m_projectExplorerDock = new QDockWidget(this); m_projectExplorerDock->setObjectName("projectexplorer"); m_projectExplorerDock->setWindowTitle(i18nc("@title:window", "Project Explorer")); addDockWidget(Qt::LeftDockWidgetArea, m_projectExplorerDock); m_projectExplorer = new ProjectExplorer(m_projectExplorerDock); m_projectExplorerDock->setWidget(m_projectExplorer); connect(m_projectExplorer, &ProjectExplorer::currentAspectChanged, this, &MainWin::handleCurrentAspectChanged); connect(m_projectExplorerDock, &QDockWidget::visibilityChanged, this, &MainWin::projectExplorerDockVisibilityChanged); //Properties dock m_propertiesDock = new QDockWidget(this); m_propertiesDock->setObjectName("aspect_properties_dock"); m_propertiesDock->setWindowTitle(i18nc("@title:window", "Properties")); addDockWidget(Qt::RightDockWidgetArea, m_propertiesDock); auto* sa = new QScrollArea(m_propertiesDock); stackedWidget = new QStackedWidget(sa); sa->setWidget(stackedWidget); sa->setWidgetResizable(true); m_propertiesDock->setWidget(sa); connect(m_propertiesDock, &QDockWidget::visibilityChanged, this, &MainWin::propertiesDockVisibilityChanged); //GUI-observer; m_guiObserver = new GuiObserver(this); } m_projectExplorer->setModel(m_aspectTreeModel); m_projectExplorer->setProject(m_project); m_projectExplorer->setCurrentAspect(m_project); m_projectExplorerDock->show(); m_propertiesDock->show(); updateGUIOnProjectChanges(); connect(m_project, &Project::aspectAdded, this, &MainWin::handleAspectAdded); connect(m_project, &Project::aspectRemoved, this, &MainWin::handleAspectRemoved); connect(m_project, &Project::aspectAboutToBeRemoved, this, &MainWin::handleAspectAboutToBeRemoved); connect(m_project, SIGNAL(statusInfo(QString)), statusBar(), SLOT(showMessage(QString))); connect(m_project, &Project::changed, this, &MainWin::projectChanged); connect(m_project, &Project::requestProjectContextMenu, this, &MainWin::createContextMenu); connect(m_project, &Project::requestFolderContextMenu, this, &MainWin::createFolderContextMenu); connect(m_project, &Project::mdiWindowVisibilityChanged, this, &MainWin::updateMdiWindowVisibility); connect(m_project, &Project::closeRequested, this, &MainWin::closeProject); m_undoViewEmptyLabel = i18n("%1: created", m_project->name()); setCaption(m_project->name()); return true; } void MainWin::openProject() { KConfigGroup conf(KSharedConfig::openConfig(), "MainWin"); const QString& dir = conf.readEntry("LastOpenDir", ""); QString extensions = i18n("LabPlot Projects (%1)", Project::supportedExtensions()); #ifdef HAVE_LIBORIGIN extensions += i18n(";;Origin Projects (%1)", OriginProjectParser::supportedExtensions()); #endif #ifdef HAVE_CANTOR_LIBS extensions += i18n(";;Cantor Projects (.cws)"); extensions += i18n(";;Jupyter Notebooks (.ipynb)"); #endif const QString& path = QFileDialog::getOpenFileName(this,i18n("Open Project"), dir, extensions); if (path.isEmpty())// "Cancel" was clicked return; this->openProject(path); //save new "last open directory" int pos = path.lastIndexOf(QDir::separator()); if (pos != -1) { const QString& newDir = path.left(pos); if (newDir != dir) conf.writeEntry("LastOpenDir", newDir); } } void MainWin::openProject(const QString& filename) { if (filename == m_currentFileName) { KMessageBox::information(this, i18n("The project file %1 is already opened.", filename), i18n("Open Project")); return; } if(dynamic_cast(centralWidget())) { createMdiArea(); setCentralWidget(m_mdiArea); } if (!newProject()) return; WAIT_CURSOR; QElapsedTimer timer; timer.start(); bool rc = false; if (Project::isLabPlotProject(filename)) { m_project->setFileName(filename); rc = m_project->load(filename); } #ifdef HAVE_LIBORIGIN else if (OriginProjectParser::isOriginProject(filename)) { OriginProjectParser parser; parser.setProjectFileName(filename); parser.importTo(m_project, QStringList()); //TODO: add return code rc = true; } #endif #ifdef HAVE_CANTOR_LIBS else if (QFileInfo(filename).completeSuffix() == QLatin1String("cws")) { QFile file(filename); KZip archive(&file); rc = archive.open(QIODevice::ReadOnly); if (rc) { const auto* contentEntry = archive.directory()->entry(QLatin1String("content.xml")); if (contentEntry && contentEntry->isFile()) { const auto* contentFile = static_cast(contentEntry); QByteArray data = contentFile->data(); archive.close(); //determine the name of the backend QDomDocument doc; doc.setContent(data); QString backendName = doc.documentElement().attribute(QLatin1String("backend")); if (!backendName.isEmpty()) { //create new Cantor worksheet and load the data auto* worksheet = new CantorWorksheet(backendName); worksheet->setName(QFileInfo(filename).fileName()); worksheet->setComment(filename); file.open(QIODevice::ReadOnly); QByteArray content = file.readAll(); rc = worksheet->init(&content); if (rc) m_project->addChild(worksheet); else { delete worksheet; RESET_CURSOR; QMessageBox::critical(this, i18n("Failed to open project"), i18n("Failed to process the content of the file '%1'.", filename)); } } else { RESET_CURSOR; rc = false; QMessageBox::critical(this, i18n("Failed to open project"), i18n("Failed to process the content of the file '%1'.", filename)); } } else { RESET_CURSOR; rc = false; QMessageBox::critical(this, i18n("Failed to open project"), i18n("Failed to process the content of the file '%1'.", filename)); } } else { RESET_CURSOR; QMessageBox::critical(this, i18n("Failed to open project"), i18n("Failed to open the file '%1'.", filename)); } } else if (QFileInfo(filename).completeSuffix() == QLatin1String("ipynb")) { QFile file(filename); rc = file.open(QIODevice::ReadOnly); if (rc) { QByteArray content = file.readAll(); QJsonParseError error; // TODO: use QJsonDocument& doc = QJsonDocument::fromJson(content, &error); if minimum Qt version is at least 5.10 const QJsonDocument& jsonDoc = QJsonDocument::fromJson(content, &error); const QJsonObject& doc = jsonDoc.object(); if (error.error == QJsonParseError::NoError) { //determine the backend name QString backendName; // TODO: use doc["metadata"]["kernelspec"], etc. if minimum Qt version is at least 5.10 if ((doc["metadata"] != QJsonValue::Undefined && doc["metadata"].isObject()) && (doc["metadata"].toObject()["kernelspec"] != QJsonValue::Undefined && doc["metadata"].toObject()["kernelspec"].isObject()) ) { QString kernel; if (doc["metadata"].toObject()["kernelspec"].toObject()["name"] != QJsonValue::Undefined) kernel = doc["metadata"].toObject()["kernelspec"].toObject()["name"].toString(); if (!kernel.isEmpty()) { if (kernel.startsWith(QLatin1String("julia"))) backendName = QLatin1String("julia"); else if (kernel == QLatin1String("sagemath")) backendName = QLatin1String("sage"); else if (kernel == QLatin1String("ir")) backendName = QLatin1String("r"); else backendName = kernel; } else backendName = doc["metadata"].toObject()["kernelspec"].toObject()["language"].toString(); if (!backendName.isEmpty()) { //create new Cantor worksheet and load the data auto* worksheet = new CantorWorksheet(backendName); worksheet->setName(QFileInfo(filename).fileName()); worksheet->setComment(filename); rc = worksheet->init(&content); if (rc) m_project->addChild(worksheet); else { delete worksheet; RESET_CURSOR; QMessageBox::critical(this, i18n("Failed to open project"), i18n("Failed to process the content of the file '%1'.", filename)); } } else { RESET_CURSOR; rc = false; QMessageBox::critical(this, i18n("Failed to open project"), i18n("Failed to process the content of the file '%1'.", filename)); } } else { RESET_CURSOR; rc = false; QMessageBox::critical(this, i18n("Failed to open project"), i18n("Failed to process the content of the file '%1'.", filename)); } } } else { RESET_CURSOR; rc = false; QMessageBox::critical(this, i18n("Failed to open project"), i18n("Failed to open the file '%1'.", filename)); } } #endif m_project->setChanged(false); if (!rc) { closeProject(); RESET_CURSOR; return; } m_currentFileName = filename; m_project->undoStack()->clear(); m_undoViewEmptyLabel = i18n("%1: opened", m_project->name()); m_recentProjectsAction->addUrl( QUrl(filename) ); setCaption(m_project->name()); updateGUIOnProjectChanges(); updateGUI(); //there are most probably worksheets or spreadsheets in the open project -> update the GUI m_saveAction->setEnabled(false); statusBar()->showMessage( i18n("Project successfully opened (in %1 seconds).", (float)timer.elapsed()/1000) ); if (m_autoSaveActive) m_autoSaveTimer.start(); RESET_CURSOR; } void MainWin::openRecentProject(const QUrl& url) { if(dynamic_cast(centralWidget())) { createMdiArea(); setCentralWidget(m_mdiArea); } if (url.isLocalFile()) // fix for Windows this->openProject(url.toLocalFile()); else this->openProject(url.path()); } /*! Closes the current project, if available. Return \c true, if the project was closed. */ bool MainWin::closeProject() { if (m_project == nullptr) return true; //nothing to close if (warnModified()) return false; if(!m_closing) { if(dynamic_cast(centralWidget()) && m_showWelcomeScreen) { m_welcomeWidget = createWelcomeScreen(); setCentralWidget(m_welcomeWidget); } } m_projectClosing = true; statusBar()->clearMessage(); delete m_aspectTreeModel; m_aspectTreeModel = nullptr; delete m_project; m_project = nullptr; m_currentFileName.clear(); m_projectClosing = false; //update the UI if we're just closing a project //and not closing(quitting) the application if (!m_closing) { m_projectExplorerDock->hide(); m_propertiesDock->hide(); m_currentAspect = nullptr; m_currentFolder = nullptr; updateGUIOnProjectChanges(); if (m_autoSaveActive) m_autoSaveTimer.stop(); } removeDockWidget(cursorDock); delete cursorDock; cursorDock = nullptr; cursorWidget = nullptr; // is deleted, because it's the cild of cursorDock return true; } bool MainWin::saveProject() { const QString& fileName = m_project->fileName(); if (fileName.isEmpty()) return saveProjectAs(); else return save(fileName); } bool MainWin::saveProjectAs() { KConfigGroup conf(KSharedConfig::openConfig(), "MainWin"); const QString& dir = conf.readEntry("LastOpenDir", ""); QString path = QFileDialog::getSaveFileName(this, i18n("Save Project As"), dir, i18n("LabPlot Projects (*.lml *.lml.gz *.lml.bz2 *.lml.xz *.LML *.LML.GZ *.LML.BZ2 *.LML.XZ)")); if (path.isEmpty())// "Cancel" was clicked return false; if (path.contains(QLatin1String(".lml"), Qt::CaseInsensitive) == false) path.append(QLatin1String(".lml")); //save new "last open directory" int pos = path.lastIndexOf(QDir::separator()); if (pos != -1) { const QString& newDir = path.left(pos); if (newDir != dir) conf.writeEntry("LastOpenDir", newDir); } return save(path); } /*! * auxiliary function that does the actual saving of the project */ bool MainWin::save(const QString& fileName) { QTemporaryFile tempFile(QDir::tempPath() + "/" + QLatin1String("labplot_save_XXXXXX")); if (!tempFile.open()) { KMessageBox::error(this, i18n("Couldn't open the temporary file for writing.")); return false; } WAIT_CURSOR; const QString& tempFileName = tempFile.fileName(); DEBUG("Using temporary file " << tempFileName.toStdString()) tempFile.close(); // use file ending to find out how to compress file QIODevice* file; // if ending is .lml, do gzip compression anyway if (fileName.endsWith(QLatin1String(".lml"))) file = new KCompressionDevice(tempFileName, KCompressionDevice::GZip); else file = new KFilterDev(tempFileName); if (file == nullptr) file = new QFile(tempFileName); bool ok; if (file->open(QIODevice::WriteOnly)) { m_project->setFileName(fileName); QPixmap thumbnail = centralWidget()->grab(); QXmlStreamWriter writer(file); m_project->setFileName(fileName); m_project->save(thumbnail, &writer); m_project->undoStack()->clear(); m_project->setChanged(false); file->close(); // target file must not exist if (QFile::exists(fileName)) QFile::remove(fileName); // do not rename temp file. Qt still holds a handle (which fails renaming on Windows) and deletes it bool rc = QFile::copy(tempFileName, fileName); if (rc) { setCaption(m_project->name()); statusBar()->showMessage(i18n("Project saved")); m_saveAction->setEnabled(false); m_recentProjectsAction->addUrl( QUrl(fileName) ); ok = true; //if the project dock is visible, refresh the shown content //(version and modification time might have been changed) if (stackedWidget->currentWidget() == projectDock) projectDock->setProject(m_project); //we have a file name now // -> auto save can be activated now if not happened yet if (m_autoSaveActive && !m_autoSaveTimer.isActive()) m_autoSaveTimer.start(); } else { RESET_CURSOR; KMessageBox::error(this, i18n("Couldn't save the file '%1'.", fileName)); ok = false; } } else { RESET_CURSOR; KMessageBox::error(this, i18n("Couldn't open the file '%1' for writing.", fileName)); ok = false; } delete file; RESET_CURSOR; return ok; } /*! * automatically saves the project in the specified time interval. */ void MainWin::autoSaveProject() { //don't auto save when there are no changes or the file name //was not provided yet (the project was never explicitly saved yet). if ( !m_project->hasChanged() || m_project->fileName().isEmpty()) return; this->saveProject(); } /*! prints the current sheet (worksheet, spreadsheet or matrix) */ void MainWin::print() { QMdiSubWindow* win = m_mdiArea->currentSubWindow(); if (!win) return; AbstractPart* part = dynamic_cast(win)->part(); statusBar()->showMessage(i18n("Preparing printing of %1", part->name())); if (part->printView()) statusBar()->showMessage(i18n("%1 printed", part->name())); else statusBar()->clearMessage(); } void MainWin::printPreview() { QMdiSubWindow* win = m_mdiArea->currentSubWindow(); if (!win) return; AbstractPart* part = dynamic_cast(win)->part(); statusBar()->showMessage(i18n("Preparing printing of %1", part->name())); if (part->printPreview()) statusBar()->showMessage(i18n("%1 printed", part->name())); else statusBar()->clearMessage(); } /**************************************************************************************/ /*! adds a new Folder to the project. */ void MainWin::newFolder() { Folder* folder = new Folder(i18n("Folder")); this->addAspectToProject(folder); } /*! adds a new Workbook to the project. */ void MainWin::newWorkbook() { Workbook* workbook = new Workbook(i18n("Workbook")); this->addAspectToProject(workbook); } /*! adds a new Datapicker to the project. */ void MainWin::newDatapicker() { Datapicker* datapicker = new Datapicker(i18n("Datapicker")); this->addAspectToProject(datapicker); } /*! adds a new Spreadsheet to the project. */ void MainWin::newSpreadsheet() { Spreadsheet* spreadsheet = new Spreadsheet(i18n("Spreadsheet")); //if the current active window is a workbook and no folder/project is selected in the project explorer, //add the new spreadsheet to the workbook Workbook* workbook = dynamic_cast(m_currentAspect); if (workbook) { QModelIndex index = m_projectExplorer->currentIndex(); const auto* aspect = static_cast(index.internalPointer()); if (!aspect->inherits(AspectType::Folder)) { workbook->addChild(spreadsheet); return; } } this->addAspectToProject(spreadsheet); } /*! adds a new Matrix to the project. */ void MainWin::newMatrix() { Matrix* matrix = new Matrix(i18n("Matrix")); //if the current active window is a workbook and no folder/project is selected in the project explorer, //add the new matrix to the workbook Workbook* workbook = dynamic_cast(m_currentAspect); if (workbook) { QModelIndex index = m_projectExplorer->currentIndex(); const auto* aspect = static_cast(index.internalPointer()); if (!aspect->inherits(AspectType::Folder)) { workbook->addChild(matrix); return; } } this->addAspectToProject(matrix); } /*! adds a new Worksheet to the project. */ void MainWin::newWorksheet() { Worksheet* worksheet = new Worksheet(i18n("Worksheet")); this->addAspectToProject(worksheet); } /*! adds a new Note to the project. */ void MainWin::newNotes() { Note* notes = new Note(i18n("Note")); this->addAspectToProject(notes); } /*! returns a pointer to a \c Spreadsheet object, if the currently active Mdi-Subwindow or if the currently selected tab in a \c WorkbookView is a \c SpreadsheetView Otherwise returns \c 0. */ Spreadsheet* MainWin::activeSpreadsheet() const { if(dynamic_cast(centralWidget()) != nullptr) { return nullptr; } if (!m_currentAspect) return nullptr; Spreadsheet* spreadsheet = nullptr; if (m_currentAspect->type() == AspectType::Spreadsheet) spreadsheet = dynamic_cast(m_currentAspect); else { //check whether one of spreadsheet columns is selected and determine the spreadsheet auto* parent = m_currentAspect->parentAspect(); if (parent && parent->type() == AspectType::Spreadsheet) spreadsheet = dynamic_cast(parent); } return spreadsheet; } #ifdef HAVE_CANTOR_LIBS /* adds a new Cantor Spreadsheet to the project. */ void MainWin::newCantorWorksheet(QAction* action) { CantorWorksheet* cantorworksheet = new CantorWorksheet(action->data().toString()); this->addAspectToProject(cantorworksheet); } /********************************************************************************/ #endif /*! called if there were changes in the project. Adds "changed" to the window caption and activates the save-Action. */ void MainWin::projectChanged() { setCaption(i18n("%1 [Changed]", m_project->name())); m_saveAction->setEnabled(true); m_undoAction->setEnabled(true); return; } void MainWin::handleCurrentSubWindowChanged(QMdiSubWindow* win) { if (!win) return; auto* view = qobject_cast(win); if (!view) { updateGUI(); return; } if (view == m_currentSubWindow) { //do nothing, if the current sub-window gets selected again. //This event happens, when labplot loses the focus (modal window is opened or the user switches to another application) //and gets it back (modal window is closed or the user switches back to labplot). return; } else m_currentSubWindow = view; updateGUI(); if (!m_suppressCurrentSubWindowChangedEvent) m_projectExplorer->setCurrentAspect(view->part()); } void MainWin::handleAspectAdded(const AbstractAspect* aspect) { const auto* part = dynamic_cast(aspect); if (part) { // connect(part, &AbstractPart::importFromFileRequested, this, &MainWin::importFileDialog); connect(part, &AbstractPart::importFromFileRequested, this, [=]() {importFileDialog();}); connect(part, &AbstractPart::importFromSQLDatabaseRequested, this, &MainWin::importSqlDialog); //TODO: export, print and print preview should be handled in the views and not in MainWin. connect(part, &AbstractPart::exportRequested, this, &MainWin::exportDialog); connect(part, &AbstractPart::printRequested, this, &MainWin::print); connect(part, &AbstractPart::printPreviewRequested, this, &MainWin::printPreview); connect(part, &AbstractPart::showRequested, this, &MainWin::handleShowSubWindowRequested); const auto* worksheet = dynamic_cast(aspect); if (worksheet) connect(worksheet, &Worksheet::cartesianPlotMouseModeChanged, this, &MainWin::cartesianPlotMouseModeChanged); } } void MainWin::handleAspectRemoved(const AbstractAspect* parent,const AbstractAspect* before,const AbstractAspect* aspect) { Q_UNUSED(before); Q_UNUSED(aspect); //no need to react on removal of // - AbstractSimpleFilter // - columns in the data spreadsheet of a datapicker curve, // this can only happen when changing the error type and is done on the level of DatapickerImage if (!dynamic_cast(aspect) && !(parent->parentAspect() && parent->parentAspect()->type() == AspectType::DatapickerCurve) ) m_projectExplorer->setCurrentAspect(parent); } void MainWin::handleAspectAboutToBeRemoved(const AbstractAspect *aspect) { const auto* part = qobject_cast(aspect); if (!part) return; const auto* workbook = dynamic_cast(aspect->parentAspect()); auto* datapicker = dynamic_cast(aspect->parentAspect()); if (!datapicker) datapicker = dynamic_cast(aspect->parentAspect()->parentAspect()); if (!workbook && !datapicker) { PartMdiView* win = part->mdiSubWindow(); if (win) m_mdiArea->removeSubWindow(win); } } /*! called when the current aspect in the tree of the project explorer was changed. Selects the new aspect. */ void MainWin::handleCurrentAspectChanged(AbstractAspect *aspect) { if (!aspect) aspect = m_project; // should never happen, just in case m_suppressCurrentSubWindowChangedEvent = true; if (aspect->folder() != m_currentFolder) { m_currentFolder = aspect->folder(); updateMdiWindowVisibility(); } m_currentAspect = aspect; //activate the corresponding MDI sub window for the current aspect activateSubWindowForAspect(aspect); m_suppressCurrentSubWindowChangedEvent = false; updateGUI(); } void MainWin::activateSubWindowForAspect(const AbstractAspect* aspect) const { const auto* part = dynamic_cast(aspect); if (part) { //for LiveDataSource we currently don't show any view /*if (dynamic_cast(part)) return;*/ PartMdiView* win; //for aspects being children of a Workbook, we show workbook's window, otherwise the window of the selected part const auto* workbook = dynamic_cast(aspect->parentAspect()); auto* datapicker = dynamic_cast(aspect->parentAspect()); if (!datapicker) datapicker = dynamic_cast(aspect->parentAspect()->parentAspect()); if (workbook) win = workbook->mdiSubWindow(); else if (datapicker) win = datapicker->mdiSubWindow(); else win = part->mdiSubWindow(); if (m_mdiArea->subWindowList().indexOf(win) == -1) { if (dynamic_cast(part)) m_mdiArea->addSubWindow(win, Qt::Tool); else m_mdiArea->addSubWindow(win); win->show(); //Qt provides its own "system menu" for every sub-window. The shortcut for the close-action //in this menu collides with our global m_closeAction. //remove the shortcuts in the system menu to avoid this collision. QMenu* menu = win->systemMenu(); if (menu) { for (QAction* action : menu->actions()) action->setShortcut(QKeySequence()); } } m_mdiArea->setActiveSubWindow(win); } else { //activate the mdiView of the parent, if a child was selected const AbstractAspect* parent = aspect->parentAspect(); if (parent) { activateSubWindowForAspect(parent); //if the parent's parent is a Workbook (a column of a spreadsheet in workbook was selected), //we need to select the corresponding tab in WorkbookView too if (parent->parentAspect()) { auto* workbook = dynamic_cast(parent->parentAspect()); auto* datapicker = dynamic_cast(parent->parentAspect()); if (!datapicker) datapicker = dynamic_cast(parent->parentAspect()->parentAspect()); if (workbook) workbook->childSelected(parent); else if (datapicker) datapicker->childSelected(parent); } } } return; } void MainWin::setMdiWindowVisibility(QAction* action) { m_project->setMdiWindowVisibility((Project::MdiWindowVisibility)(action->data().toInt())); } /*! shows the sub window of a worksheet, matrix or a spreadsheet. Used if the window was closed before and the user asks to show the window again via the context menu in the project explorer. */ void MainWin::handleShowSubWindowRequested() { activateSubWindowForAspect(m_currentAspect); } /*! this is called on a right click on the root folder in the project explorer */ void MainWin::createContextMenu(QMenu* menu) const { QAction* firstAction = nullptr; // if we're populating the context menu for the project explorer, then //there're already actions available there. Skip the first title-action //and insert the action at the beginning of the menu. if (menu->actions().size()>1) firstAction = menu->actions().at(1); menu->insertMenu(firstAction, m_newMenu); //The tabbed view collides with the visibility policy for the subwindows. //Hide the menus for the visibility policy if the tabbed view is used. if (m_mdiArea->viewMode() != QMdiArea::TabbedView) { menu->insertSeparator(firstAction); menu->insertMenu(firstAction, m_visibilityMenu); menu->insertSeparator(firstAction); } } /*! this is called on a right click on a non-root folder in the project explorer */ void MainWin::createFolderContextMenu(const Folder* folder, QMenu* menu) const { Q_UNUSED(folder); //Folder provides it's own context menu. Add a separator before adding additional actions. menu->addSeparator(); this->createContextMenu(menu); } void MainWin::undo() { WAIT_CURSOR; m_project->undoStack()->undo(); if (m_project->undoStack()->index() == 0) { setCaption(m_project->name()); m_saveAction->setEnabled(false); m_undoAction->setEnabled(false); m_project->setChanged(false); } m_redoAction->setEnabled(true); RESET_CURSOR; } void MainWin::redo() { WAIT_CURSOR; m_project->undoStack()->redo(); projectChanged(); if (m_project->undoStack()->index() == m_project->undoStack()->count()) m_redoAction->setEnabled(false); RESET_CURSOR; } /*! Shows/hides mdi sub-windows depending on the current visibility policy. */ void MainWin::updateMdiWindowVisibility() const { QList windows = m_mdiArea->subWindowList(); PartMdiView* part_view; switch (m_project->mdiWindowVisibility()) { case Project::allMdiWindows: for (auto* window : windows) window->show(); break; case Project::folderOnly: for (auto* window : windows) { part_view = qobject_cast(window); Q_ASSERT(part_view); if (part_view->part()->folder() == m_currentFolder) part_view->show(); else part_view->hide(); } break; case Project::folderAndSubfolders: for (auto* window : windows) { part_view = qobject_cast(window); if (part_view->part()->isDescendantOf(m_currentFolder)) part_view->show(); else part_view->hide(); } break; } } void MainWin::toggleDockWidget(QAction* action) { if (action->objectName() == "toggle_project_explorer_dock") { if (m_projectExplorerDock->isVisible()) m_projectExplorerDock->hide(); // toggleHideWidget(m_projectExplorerDock, true); else m_projectExplorerDock->show(); // toggleShowWidget(m_projectExplorerDock, true); } else if (action->objectName() == "toggle_properties_explorer_dock") { if (m_propertiesDock->isVisible()) m_propertiesDock->hide(); // toggleHideWidget(m_propertiesDock, false); else m_propertiesDock->show(); // toggleShowWidget(m_propertiesDock, false); } } /* void MainWin::toggleHideWidget(QWidget* widget, bool hideToLeft) { auto* timeline = new QTimeLine(800, this); timeline->setEasingCurve(QEasingCurve::InOutQuad); connect(timeline, &QTimeLine::valueChanged, [=] { const qreal value = timeline->currentValue(); const int widgetWidth = widget->width(); const int widgetPosY = widget->pos().y(); int moveX = 0; if (hideToLeft) { moveX = static_cast(value * widgetWidth) - widgetWidth; } else { const int frameRight = this->frameGeometry().right(); moveX = frameRight - static_cast(value * widgetWidth); } widget->move(moveX, widgetPosY); }); timeline->setDirection(QTimeLine::Backward); timeline->start(); connect(timeline, &QTimeLine::finished, [widget] {widget->hide();}); connect(timeline, &QTimeLine::finished, timeline, &QTimeLine::deleteLater); } void MainWin::toggleShowWidget(QWidget* widget, bool showToRight) { auto* timeline = new QTimeLine(800, this); timeline->setEasingCurve(QEasingCurve::InOutQuad); connect(timeline, &QTimeLine::valueChanged, [=]() { if (widget->isHidden()) { widget->show(); } const qreal value = timeline->currentValue(); const int widgetWidth = widget->width(); const int widgetPosY = widget->pos().y(); int moveX = 0; if (showToRight) { moveX = static_cast(value * widgetWidth) - widgetWidth; } else { const int frameRight = this->frameGeometry().right(); moveX = frameRight - static_cast(value * widgetWidth); } widget->move(moveX, widgetPosY); }); timeline->setDirection(QTimeLine::Forward); timeline->start(); connect(timeline, &QTimeLine::finished, timeline, &QTimeLine::deleteLater); } */ void MainWin::projectExplorerDockVisibilityChanged(bool visible) { m_toggleProjectExplorerDockAction->setChecked(visible); } void MainWin::propertiesDockVisibilityChanged(bool visible) { m_togglePropertiesDockAction->setChecked(visible); } void MainWin::cursorDockVisibilityChanged(bool visible) { //if the cursor dock was closed, switch to the "Select and Edit" mouse mode if (!visible) { // auto* worksheet = activeWorksheet(); //TODO: } } void MainWin::cartesianPlotMouseModeChanged(CartesianPlot::MouseMode mode) { if (mode != CartesianPlot::Cursor) { if (cursorDock) cursorDock->hide(); } else { if (!cursorDock) { cursorDock = new QDockWidget(i18n("Cursor"), this); cursorWidget = new CursorDock(cursorDock); cursorDock->setWidget(cursorWidget); connect(cursorDock, &QDockWidget::visibilityChanged, this, &MainWin::cursorDockVisibilityChanged); // cursorDock->setFloating(true); // does not work. Don't understand why // if (m_propertiesDock) // tabifyDockWidget(cursorDock, m_propertiesDock); // else addDockWidget(Qt::DockWidgetArea::RightDockWidgetArea, cursorDock); } auto* worksheet = static_cast(QObject::sender()); cursorWidget->setWorksheet(worksheet); cursorDock->show(); } } void MainWin::toggleFullScreen() { if (this->windowState() == Qt::WindowFullScreen) this->setWindowState(m_lastWindowState); else { m_lastWindowState = this->windowState(); this->showFullScreen(); } } void MainWin::closeEvent(QCloseEvent* event) { m_closing = true; if (!this->closeProject()) { m_closing = false; event->ignore(); } } void MainWin::dragEnterEvent(QDragEnterEvent* event) { event->accept(); } void MainWin::dropEvent(QDropEvent* event) { if (event->mimeData() && !event->mimeData()->urls().isEmpty()) { QUrl url = event->mimeData()->urls().at(0); const QString& f = url.toLocalFile(); bool open = Project::isLabPlotProject(f); #ifdef HAVE_LIBORIGIN if (!open) open = OriginProjectParser::isOriginProject(f); #endif #ifdef HAVE_CANTOR_LIBS if (!open) { QFileInfo fi(f); open = (fi.completeSuffix() == QLatin1String("cws")) || (fi.completeSuffix() == QLatin1String("ipynb")); } #endif if (open) openProject(f); else { if (!m_project) newProject(); importFileDialog(f); } event->accept(); } else event->ignore(); } void MainWin::handleSettingsChanges() { const KConfigGroup group = KSharedConfig::openConfig()->group( "Settings_General" ); if(dynamic_cast(centralWidget()) == nullptr) { QMdiArea::ViewMode viewMode = QMdiArea::ViewMode(group.readEntry("ViewMode", 0)); if (m_mdiArea->viewMode() != viewMode) { m_mdiArea->setViewMode(viewMode); if (viewMode == QMdiArea::SubWindowView) this->updateMdiWindowVisibility(); } if (m_mdiArea->viewMode() == QMdiArea::TabbedView) { m_tileWindowsAction->setVisible(false); m_cascadeWindowsAction->setVisible(false); QTabWidget::TabPosition tabPosition = QTabWidget::TabPosition(group.readEntry("TabPosition", 0)); if (m_mdiArea->tabPosition() != tabPosition) m_mdiArea->setTabPosition(tabPosition); } else { m_tileWindowsAction->setVisible(true); m_cascadeWindowsAction->setVisible(true); } } //autosave bool autoSave = group.readEntry("AutoSave", 0); if (m_autoSaveActive != autoSave) { m_autoSaveActive = autoSave; if (autoSave) m_autoSaveTimer.start(); else m_autoSaveTimer.stop(); } int interval = group.readEntry("AutoSaveInterval", 1); interval *= 60*1000; if (interval != m_autoSaveTimer.interval()) m_autoSaveTimer.setInterval(interval); //show memory info bool showMemoryInfo = group.readEntry(QLatin1String("ShowMemoryInfo"), true); if (m_showMemoryInfo != showMemoryInfo) { m_showMemoryInfo = showMemoryInfo; if (showMemoryInfo) { m_memoryInfoWidget = new MemoryWidget(statusBar()); statusBar()->addPermanentWidget(m_memoryInfoWidget); } else { if (m_memoryInfoWidget) { statusBar()->removeWidget(m_memoryInfoWidget); delete m_memoryInfoWidget; m_memoryInfoWidget = nullptr; } } } bool showWelcomeScreen = group.readEntry(QLatin1String("ShowWelcomeScreen"), true); if(m_showWelcomeScreen != showWelcomeScreen) { m_showWelcomeScreen = showWelcomeScreen; } } void MainWin::openDatasetExample() { newProject(); addAspectToProject(m_welcomeScreenHelper->releaseConfiguredSpreadsheet()); } /***************************************************************************************/ /************************************** dialogs ***************************************/ /***************************************************************************************/ /*! shows the dialog with the Undo-history. */ void MainWin::historyDialog() { if (!m_project->undoStack()) return; auto* dialog = new HistoryDialog(this, m_project->undoStack(), m_undoViewEmptyLabel); int index = m_project->undoStack()->index(); if (dialog->exec() != QDialog::Accepted) { if (m_project->undoStack()->count() != 0) m_project->undoStack()->setIndex(index); } //disable undo/redo-actions if the history was cleared //(in both cases, when accepted or rejected in the dialog) if (m_project->undoStack()->count() == 0) { m_undoAction->setEnabled(false); m_redoAction->setEnabled(false); } } /*! Opens the dialog to import data to the selected workbook, spreadsheet or matrix */ void MainWin::importFileDialog(const QString& fileName) { DEBUG("MainWin::importFileDialog()"); auto* dlg = new ImportFileDialog(this, false, fileName); // select existing container if (m_currentAspect->type() == AspectType::Spreadsheet || m_currentAspect->type() == AspectType::Matrix || m_currentAspect->type() == AspectType::Workbook) dlg->setCurrentIndex(m_projectExplorer->currentIndex()); else if (m_currentAspect->type() == AspectType::Column && m_currentAspect->parentAspect()->type() == AspectType::Spreadsheet) dlg->setCurrentIndex(m_aspectTreeModel->modelIndexOfAspect(m_currentAspect->parentAspect())); if (dlg->exec() == QDialog::Accepted) { dlg->importTo(statusBar()); m_project->setChanged(true); } delete dlg; DEBUG("MainWin::importFileDialog() DONE"); } void MainWin::importSqlDialog() { DEBUG("MainWin::importSqlDialog()"); auto* dlg = new ImportSQLDatabaseDialog(this); // select existing container if (m_currentAspect->type() == AspectType::Spreadsheet || m_currentAspect->type() == AspectType::Matrix || m_currentAspect->type() == AspectType::Workbook) dlg->setCurrentIndex(m_projectExplorer->currentIndex()); else if (m_currentAspect->type() == AspectType::Column && m_currentAspect->parentAspect()->type() == AspectType::Spreadsheet) dlg->setCurrentIndex(m_aspectTreeModel->modelIndexOfAspect(m_currentAspect->parentAspect())); if (dlg->exec() == QDialog::Accepted) { dlg->importTo(statusBar()); m_project->setChanged(true); } delete dlg; DEBUG("MainWin::importSqlDialog() DONE"); } void MainWin::importProjectDialog() { DEBUG("MainWin::importProjectDialog()"); ImportProjectDialog::ProjectType type; if (QObject::sender() == m_importOpjAction) type = ImportProjectDialog::ProjectOrigin; else type = ImportProjectDialog::ProjectLabPlot; auto* dlg = new ImportProjectDialog(this, type); // set current folder dlg->setCurrentFolder(m_currentFolder); if (dlg->exec() == QDialog::Accepted) { dlg->importTo(statusBar()); m_project->setChanged(true); } delete dlg; DEBUG("MainWin::importProjectDialog() DONE"); } /*! * \brief opens a dialog to import datasets */ void MainWin::importDatasetDialog() { ImportDatasetDialog* dlg = new ImportDatasetDialog(this); if (dlg->exec() == QDialog::Accepted) { Spreadsheet* spreadsheet = new Spreadsheet(i18n("Dataset%1", 1)); DatasetHandler* dataset = new DatasetHandler(spreadsheet); dlg->importToDataset(dataset, statusBar()); QTimer timer; timer.setSingleShot(true); QEventLoop loop; connect(dataset, &DatasetHandler::downloadCompleted, &loop, &QEventLoop::quit); connect(&timer, &QTimer::timeout, &loop, &QEventLoop::quit); timer.start(1500); loop.exec(); if(timer.isActive()){ timer.stop(); addAspectToProject(spreadsheet); delete dataset; } else delete dataset; } delete dlg; } /*! opens the dialog for the export of the currently active worksheet, spreadsheet or matrix. */ void MainWin::exportDialog() { QMdiSubWindow* win = m_mdiArea->currentSubWindow(); if (!win) return; AbstractPart* part = dynamic_cast(win)->part(); if (part->exportView()) statusBar()->showMessage(i18n("%1 exported", part->name())); } void MainWin::editFitsFileDialog() { auto* editDialog = new FITSHeaderEditDialog(this); if (editDialog->exec() == QDialog::Accepted) { if (editDialog->saved()) statusBar()->showMessage(i18n("FITS files saved")); } } /*! adds a new file data source to the current project. */ void MainWin::newLiveDataSourceActionTriggered() { ImportFileDialog* dlg = new ImportFileDialog(this, true); if (dlg->exec() == QDialog::Accepted) { if (static_cast(dlg->sourceType()) == LiveDataSource::MQTT) { #ifdef HAVE_MQTT MQTTClient* mqttClient = new MQTTClient(i18n("MQTT Client%1", 1)); dlg->importToMQTT(mqttClient); mqttClient->setName(mqttClient->clientHostName()); QVector existingClients = m_project->children(AbstractAspect::Recursive); //doesn't make sense to have more MQTTClients connected to the same broker bool found = false; for (const auto* client : existingClients) { if (client->clientHostName() == mqttClient->clientHostName() && client->clientPort() == mqttClient->clientPort()) { found = true; break; } } if (!found) addAspectToProject(mqttClient); else { delete mqttClient; QMessageBox::warning(this, "Warning", "There already is a MQTTClient with this host!"); } #endif } else { LiveDataSource* dataSource = new LiveDataSource(i18n("Live data source%1", 1), false); dlg->importToLiveDataSource(dataSource, statusBar()); addAspectToProject(dataSource); } } delete dlg; } void MainWin::addAspectToProject(AbstractAspect* aspect) { const QModelIndex& index = m_projectExplorer->currentIndex(); if (index.isValid()) { auto* parent = static_cast(index.internalPointer()); #ifdef HAVE_MQTT //doesn't make sense to add a new MQTTClient to an existing MQTTClient or to any of its successors QString className = parent->metaObject()->className(); MQTTClient* clientAncestor = parent->ancestor(); if (className == "MQTTClient") parent = parent->parentAspect(); else if (clientAncestor != nullptr) parent = clientAncestor->parentAspect(); #endif parent->folder()->addChild(aspect); } else m_project->addChild(aspect); } void MainWin::settingsDialog() { auto* dlg = new SettingsDialog(this); connect (dlg, &SettingsDialog::settingsChanged, this, &MainWin::handleSettingsChanges); connect (dlg, &SettingsDialog::resetWelcomeScreen, this, &MainWin::resetWelcomeScreen); dlg->exec(); } #ifdef HAVE_CANTOR_LIBS void MainWin::cantorSettingsDialog() { static KCoreConfigSkeleton* emptyConfig = new KCoreConfigSkeleton(); KConfigDialog *cantorDialog = new KConfigDialog(this, QLatin1String("Cantor Settings"), emptyConfig); for (auto* backend : Cantor::Backend::availableBackends()) if (backend->config()) //It has something to configure, so add it to the dialog cantorDialog->addPage(backend->settingsWidget(cantorDialog), backend->config(), backend->name(), backend->icon()); cantorDialog->show(); } #endif diff --git a/src/kdefrontend/MainWin.h b/src/kdefrontend/MainWin.h index 3de3a666c..990ecf686 100644 --- a/src/kdefrontend/MainWin.h +++ b/src/kdefrontend/MainWin.h @@ -1,352 +1,364 @@ /*************************************************************************** File : MainWin.h Project : LabPlot -------------------------------------------------------------------- Copyright : (C) 2011-2018 Alexander Semke (alexander.semke@web.de) Copyright : (C) 2008-2018 by Stefan Gerlach (stefan.gerlach@uni.kn) Description : Main window of the application ***************************************************************************/ /*************************************************************************** * * * This program is free software; you can redistribute it and/or modify * * it under the terms of the GNU General Public License as published by * * the Free Software Foundation; either version 2 of the License, or * * (at your option) any later version. * * * * This program is distributed in the hope that it will be useful, * * but WITHOUT ANY WARRANTY; without even the implied warranty of * * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * * GNU General Public License for more details. * * * * You should have received a copy of the GNU General Public License * * along with this program; if not, write to the Free Software * * Foundation, Inc., 51 Franklin Street, Fifth Floor, * * Boston, MA 02110-1301 USA * * * ***************************************************************************/ #ifndef MAINWIN_H #define MAINWIN_H #include "backend/worksheet/plots/cartesian/CartesianPlot.h" #include #include class AbstractAspect; class AspectTreeModel; class Folder; class ProjectExplorer; class Project; class Worksheet; class Note; class Workbook; class Datapicker; class Spreadsheet; class Matrix; class GuiObserver; class AxisDock; class CursorDock; class NoteDock; class CartesianPlotDock; class HistogramDock; class BarChartPlotDock; class CartesianPlotLegendDock; class CustomPointDock; class ReferenceLineDock; class ColumnDock; class LiveDataDock; class MatrixDock; class ProjectDock; class SpreadsheetDock; class XYCurveDock; class XYEquationCurveDock; class XYDataReductionCurveDock; class XYDifferentiationCurveDock; class XYIntegrationCurveDock; class XYInterpolationCurveDock; class XYSmoothCurveDock; class XYFitCurveDock; class XYFourierFilterCurveDock; class XYFourierTransformCurveDock; class XYConvolutionCurveDock; class XYCorrelationCurveDock; class WorksheetDock; class ImageDock; class LabelWidget; class DatapickerImageWidget; class DatapickerCurveWidget; class MemoryWidget; class CartesianPlot; #ifdef HAVE_CANTOR_LIBS class CantorWorksheet; class CantorWorksheetDock; #endif class ImportDatasetWidget; class TreeModel; class WelcomeScreenHelper; class QDockWidget; class QDragEnterEvent; class QDropEvent; class QMdiArea; class QMdiSubWindow; class QStackedWidget; class QToolButton; class QQuickWidget; class KColorSchemeManager; class KRecentFilesAction; +#ifdef HAVE_KUSERFEEDBACK +#include +#endif + #ifdef Q_OS_MAC class KDMacTouchBar; #endif class MainWin : public KXmlGuiWindow { Q_OBJECT public: explicit MainWin(QWidget* parent = nullptr, const QString& filename = nullptr); ~MainWin() override; void showPresenter(); AspectTreeModel* model() const; Project* project() const; void addAspectToProject(AbstractAspect*); enum LoadOnStart {Nothing, NewProject, NewProjectWorksheet, LastProject, WelcomeScreen}; +#ifdef HAVE_KUSERFEEDBACK + KUserFeedback::Provider& userFeedbackProvider() {return m_userFeedbackProvider;} +#endif + private: QMdiArea* m_mdiArea{nullptr}; KColorSchemeManager* m_schemeManager{nullptr}; QMdiSubWindow* m_currentSubWindow{nullptr}; Project* m_project{nullptr}; AspectTreeModel* m_aspectTreeModel{nullptr}; ProjectExplorer* m_projectExplorer{nullptr}; QDockWidget* m_projectExplorerDock{nullptr}; QDockWidget* m_propertiesDock{nullptr}; AbstractAspect* m_currentAspect{nullptr}; Folder* m_currentFolder{nullptr}; QString m_currentFileName; QString m_undoViewEmptyLabel; bool m_suppressCurrentSubWindowChangedEvent{false}; bool m_closing{false}; bool m_projectClosing{false}; bool m_autoSaveActive{false}; QTimer m_autoSaveTimer; bool m_showMemoryInfo{true}; bool m_showWelcomeScreen{false}; bool m_saveWelcomeScreen{true}; MemoryWidget* m_memoryInfoWidget{nullptr}; Qt::WindowStates m_lastWindowState; //< last window state before switching to full screen mode QMdiSubWindow* m_welcomeWindow{nullptr}; QQuickWidget* m_welcomeWidget{nullptr}; WelcomeScreenHelper* m_welcomeScreenHelper{nullptr}; ImportDatasetWidget* m_importDatasetWidget{nullptr}; +#ifdef HAVE_KUSERFEEDBACK + KUserFeedback::Provider m_userFeedbackProvider; +#endif + #ifdef Q_OS_MAC KDMacTouchBar* m_touchBar; #endif KRecentFilesAction* m_recentProjectsAction; QAction* m_saveAction; QAction* m_saveAsAction; QAction* m_printAction; QAction* m_printPreviewAction; QAction* m_importFileAction; QAction* m_importSqlAction; QAction* m_importDatasetAction; QAction* m_importLabPlotAction; QAction* m_importOpjAction; QAction* m_exportAction; QAction* m_closeAction; QAction* m_newFolderAction; QAction* m_newWorkbookAction; QAction* m_newSpreadsheetAction; QAction* m_newMatrixAction; QAction* m_newWorksheetAction; QAction* m_newNotesAction; QAction* m_newLiveDataSourceAction; QAction* m_newSqlDataSourceAction; QAction* m_newScriptAction; QAction* m_newProjectAction; QAction* m_openProjectAction; QAction* m_historyAction; QAction* m_undoAction; QAction* m_redoAction; QAction* m_closeWindowAction; QAction* m_closeAllWindowsAction; QAction* m_tileWindowsAction; QAction* m_cascadeWindowsAction; QAction* m_nextWindowAction; QAction* m_prevWindowAction; QAction* m_newDatapickerAction; QAction* m_editFitsFileAction; //toggling doch widgets QAction* m_toggleProjectExplorerDocQAction; QAction* m_togglePropertiesDocQAction; //worksheet actions QAction* worksheetZoomInAction; QAction* worksheetZoomOutAction; QAction* worksheetZoomOriginAction; QAction* worksheetZoomFitPageHeightAction; QAction* worksheetZoomFitPageWidthAction; QAction* worksheetZoomFitSelectionAction; QAction* worksheetNavigationModeAction; QAction* worksheetZoomModeAction; QAction* worksheetSelectionModeAction; QAction* worksheetVerticalLayoutAction; QAction* worksheetHorizontalLayoutAction; QAction* worksheetGridLayoutAction; QAction* worksheetBreakLayoutAction; QAction* m_visibilityFolderAction; QAction* m_visibilitySubfolderAction; QAction* m_visibilityAllAction; QAction* m_toggleProjectExplorerDockAction; QAction* m_togglePropertiesDockAction; //Menus QMenu* m_visibilityMenu{nullptr}; QMenu* m_newMenu{nullptr}; QMenu* m_importMenu; QMenu* m_editMenu{nullptr}; //Docks QStackedWidget* stackedWidget{nullptr}; AxisDock* axisDock{nullptr}; QDockWidget* cursorDock{nullptr}; CursorDock* cursorWidget{nullptr}; NoteDock* notesDock{nullptr}; CartesianPlotDock* cartesianPlotDock{nullptr}; CartesianPlotLegendDock* cartesianPlotLegendDock{nullptr}; ColumnDock* columnDock{nullptr}; LiveDataDock* m_liveDataDock{nullptr}; MatrixDock* matrixDock{nullptr}; SpreadsheetDock* spreadsheetDock{nullptr}; ProjectDock* projectDock{nullptr}; XYCurveDock* xyCurveDock{nullptr}; XYEquationCurveDock* xyEquationCurveDock{nullptr}; XYDataReductionCurveDock* xyDataReductionCurveDock{nullptr}; XYDifferentiationCurveDock* xyDifferentiationCurveDock{nullptr}; XYIntegrationCurveDock* xyIntegrationCurveDock{nullptr}; XYInterpolationCurveDock* xyInterpolationCurveDock{nullptr}; XYSmoothCurveDock* xySmoothCurveDock{nullptr}; XYFitCurveDock* xyFitCurveDock{nullptr}; XYFourierFilterCurveDock* xyFourierFilterCurveDock{nullptr}; XYFourierTransformCurveDock* xyFourierTransformCurveDock{nullptr}; XYConvolutionCurveDock* xyConvolutionCurveDock{nullptr}; XYCorrelationCurveDock* xyCorrelationCurveDock{nullptr}; HistogramDock* histogramDock{nullptr}; WorksheetDock* worksheetDock{nullptr}; LabelWidget* textLabelDock{nullptr}; ImageDock* imageDock{nullptr}; CustomPointDock* customPointDock{nullptr}; ReferenceLineDock* referenceLineDock{nullptr}; DatapickerImageWidget* datapickerImageDock{nullptr}; DatapickerCurveWidget* datapickerCurveDock{nullptr}; void initActions(); void initMenus(); bool warnModified(); void activateSubWindowForAspect(const AbstractAspect*) const; bool save(const QString&); // void toggleShowWidget(QWidget* widget, bool showToRight); // void toggleHideWidget(QWidget* widget, bool hideToLeft); Spreadsheet* activeSpreadsheet() const; //Cantor #ifdef HAVE_CANTOR_LIBS QMenu* m_newCantorWorksheetMenu; CantorWorksheetDock* cantorWorksheetDock{nullptr}; #endif friend class GuiObserver; GuiObserver* m_guiObserver{nullptr}; protected: void closeEvent(QCloseEvent*) override; void dragEnterEvent(QDragEnterEvent*) override; void dropEvent(QDropEvent*) override; private slots: void initGUI(const QString&); QQuickWidget* createWelcomeScreen(); void resetWelcomeScreen(); void createMdiArea(); void updateGUI(); void updateGUIOnProjectChanges(); void undo(); void redo(); bool newProject(); void openProject(); void openProject(const QString&); void openRecentProject(const QUrl&); bool closeProject(); bool saveProject(); bool saveProjectAs(); void autoSaveProject(); void print(); void printPreview(); void historyDialog(); void importFileDialog(const QString& fileName = QString()); void importSqlDialog(); void importProjectDialog(); void importDatasetDialog(); void exportDialog(); void editFitsFileDialog(); void settingsDialog(); void projectChanged(); void colorSchemeChanged(QAction*); void openDatasetExample(); //Cantor #ifdef HAVE_CANTOR_LIBS void newCantorWorksheet(QAction* action); void cantorSettingsDialog(); #endif void newFolder(); void newWorkbook(); void newSpreadsheet(); void newMatrix(); void newWorksheet(); void newNotes(); void newDatapicker(); //TODO: void newScript(); void newLiveDataSourceActionTriggered(); void createContextMenu(QMenu*) const; void createFolderContextMenu(const Folder*, QMenu*) const; void handleAspectAdded(const AbstractAspect*); void handleAspectAboutToBeRemoved(const AbstractAspect*); void handleAspectRemoved(const AbstractAspect*,const AbstractAspect*,const AbstractAspect*); void handleCurrentAspectChanged(AbstractAspect* ); void handleCurrentSubWindowChanged(QMdiSubWindow*); void handleShowSubWindowRequested(); void handleSettingsChanges(); void setMdiWindowVisibility(QAction*); void updateMdiWindowVisibility() const; void toggleDockWidget(QAction*); void toggleFullScreen(); void projectExplorerDockVisibilityChanged(bool); void propertiesDockVisibilityChanged(bool); void cursorDockVisibilityChanged(bool); void cartesianPlotMouseModeChanged(CartesianPlot::MouseMode); }; #endif diff --git a/src/kdefrontend/SettingsDialog.cpp b/src/kdefrontend/SettingsDialog.cpp index 531444b36..15cb64bb7 100644 --- a/src/kdefrontend/SettingsDialog.cpp +++ b/src/kdefrontend/SettingsDialog.cpp @@ -1,131 +1,152 @@ /*************************************************************************** File : SettingsDialog.cpp Project : LabPlot -------------------------------------------------------------------- Copyright : (C) 2008-2020 Alexander Semke (alexander.semke@web.de) Description : application settings dialog ***************************************************************************/ /*************************************************************************** * * * This program is free software; you can redistribute it and/or modify * * it under the terms of the GNU General Public License as published by * * the Free Software Foundation; either version 2 of the License, or * * (at your option) any later version. * * * * This program is distributed in the hope that it will be useful, * * but WITHOUT ANY WARRANTY; without even the implied warranty of * * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * * GNU General Public License for more details. * * * * You should have received a copy of the GNU General Public License * * along with this program; if not, write to the Free Software * * Foundation, Inc., 51 Franklin Street, Fifth Floor, * * Boston, MA 02110-1301 USA * * * ***************************************************************************/ #include "SettingsDialog.h" #include "MainWin.h" #include "SettingsGeneralPage.h" #include "SettingsDatasetsPage.h" #include "SettingsWelcomePage.h" #include "SettingsWorksheetPage.h" #include #include #include #include #include #include #include #include +#ifdef HAVE_KUSERFEEDBACK +#include +#endif + /** * \brief Settings dialog for Labplot. * * Contains the pages for general settings and view settings. * */ SettingsDialog::SettingsDialog(QWidget* parent) : KPageDialog(parent) { setFaceType(List); setWindowTitle(i18nc("@title:window", "Preferences")); setWindowIcon(QIcon::fromTheme("preferences-other")); setAttribute(Qt::WA_DeleteOnClose); buttonBox()->addButton(QDialogButtonBox::Apply)->setEnabled(false); buttonBox()->addButton(QDialogButtonBox::RestoreDefaults); connect(buttonBox(), &QDialogButtonBox::clicked, this, &SettingsDialog::slotButtonClicked); m_generalPage = new SettingsGeneralPage(this); KPageWidgetItem* generalFrame = addPage(m_generalPage, i18n("General")); generalFrame->setIcon(QIcon::fromTheme("system-run")); connect(m_generalPage, &SettingsGeneralPage::settingsChanged, this, &SettingsDialog::changed); m_worksheetPage = new SettingsWorksheetPage(this); KPageWidgetItem* worksheetFrame = addPage(m_worksheetPage, i18n("Worksheet")); worksheetFrame->setIcon(QIcon::fromTheme(QLatin1String("labplot-worksheet"))); connect(m_worksheetPage, &SettingsWorksheetPage::settingsChanged, this, &SettingsDialog::changed); m_datasetsPage = new SettingsDatasetsPage(this); KPageWidgetItem* datasetsFrame = addPage(m_datasetsPage, i18n("Datasets")); datasetsFrame->setIcon(QIcon::fromTheme(QLatin1String("database-index"))); m_welcomePage = new SettingsWelcomePage(this); KPageWidgetItem* welcomeFrame = addPage(m_welcomePage, i18n("Welcome Screen")); welcomeFrame->setIcon(QIcon::fromTheme(QLatin1String("database-index"))); connect(m_welcomePage, &SettingsWelcomePage::resetWelcomeScreen, this, &SettingsDialog::resetWelcomeScreen); +#ifdef HAVE_KUSERFEEDBACK + auto* mainWin = static_cast(parent); + m_userFeedbackWidget = new KUserFeedback::FeedbackConfigWidget(this); + m_userFeedbackWidget->setFeedbackProvider(&mainWin->userFeedbackProvider()); + connect(m_userFeedbackWidget, &KUserFeedback::FeedbackConfigWidget::configurationChanged, this, &SettingsDialog::changed); + + KPageWidgetItem* userFeedBackFrame = addPage(m_userFeedbackWidget, i18n("User Feedback")); + userFeedBackFrame->setIcon(QIcon::fromTheme(QLatin1String("preferences-desktop-locale"))); +#endif + //restore saved settings if available create(); // ensure there's a window created KConfigGroup conf(KSharedConfig::openConfig(), "SettingsDialog"); if (conf.exists()) { KWindowConfig::restoreWindowSize(windowHandle(), conf); resize(windowHandle()->size()); // workaround for QTBUG-40584 } else resize(QSize(0, 0).expandedTo(minimumSize())); } SettingsDialog::~SettingsDialog() { KConfigGroup dialogConfig = KSharedConfig::openConfig()->group("SettingsDialog"); KWindowConfig::saveWindowSize(windowHandle(), dialogConfig); } void SettingsDialog::slotButtonClicked(QAbstractButton* button) { if ((button == buttonBox()->button(QDialogButtonBox::Ok)) || (button == buttonBox()->button(QDialogButtonBox::Apply))) { if (m_changed) { applySettings(); setWindowTitle(i18nc("@title:window", "Preferences")); buttonBox()->button(QDialogButtonBox::Apply)->setEnabled(false); } } else if (button == buttonBox()->button(QDialogButtonBox::RestoreDefaults)) { const QString text(i18n("All settings will be reset to default values. Do you want to continue?")); if (KMessageBox::questionYesNo(this, text) == KMessageBox::Yes) { restoreDefaults(); setWindowTitle(i18nc("@title:window", "Preferences")); buttonBox()->button(QDialogButtonBox::Apply)->setEnabled(false); } } } void SettingsDialog::changed() { m_changed = true; setWindowTitle(i18nc("@title:window", "Preferences [Changed]")); buttonBox()->button(QDialogButtonBox::Apply)->setEnabled(true); } void SettingsDialog::applySettings() { m_changed = false; m_generalPage->applySettings(); m_worksheetPage->applySettings(); KSharedConfig::openConfig()->sync(); + +#ifdef HAVE_KUSERFEEDBACK + auto* mainWin = static_cast(parent()); + mainWin->userFeedbackProvider().setTelemetryMode(m_userFeedbackWidget->telemetryMode()); + mainWin->userFeedbackProvider().setSurveyInterval(m_userFeedbackWidget->surveyInterval()); +#endif + emit settingsChanged(); } void SettingsDialog::restoreDefaults() { m_changed = false; m_generalPage->restoreDefaults(); m_worksheetPage->restoreDefaults(); } diff --git a/src/kdefrontend/SettingsDialog.h b/src/kdefrontend/SettingsDialog.h index d5c5deb5f..f750cd6cf 100644 --- a/src/kdefrontend/SettingsDialog.h +++ b/src/kdefrontend/SettingsDialog.h @@ -1,65 +1,75 @@ /*************************************************************************** File : SettingsDialog.h Project : LabPlot -------------------------------------------------------------------- Copyright : (C) 2008-2020 Alexander Semke (alexander.semke@web.de) Description : application settings dialog ***************************************************************************/ /*************************************************************************** * * * This program is free software; you can redistribute it and/or modify * * it under the terms of the GNU General Public License as published by * * the Free Software Foundation; either version 2 of the License, or * * (at your option) any later version. * * * * This program is distributed in the hope that it will be useful, * * but WITHOUT ANY WARRANTY; without even the implied warranty of * * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * * GNU General Public License for more details. * * * * You should have received a copy of the GNU General Public License * * along with this program; if not, write to the Free Software * * Foundation, Inc., 51 Franklin Street, Fifth Floor, * * Boston, MA 02110-1301 USA * * * ***************************************************************************/ #ifndef SETTINGSDIALOG_H #define SETTINGSDIALOG_H #include class QAbstractButton; class SettingsGeneralPage; class SettingsWorksheetPage; class SettingsWelcomePage; class SettingsDatasetsPage; +#ifdef HAVE_KUSERFEEDBACK +namespace KUserFeedback { + class FeedbackConfigWidget; +} +#endif + class SettingsDialog : public KPageDialog { Q_OBJECT public: explicit SettingsDialog(QWidget*); ~SettingsDialog() override; private slots: void changed(); void slotButtonClicked(QAbstractButton*); private: bool m_changed{false}; SettingsGeneralPage* m_generalPage; SettingsWorksheetPage* m_worksheetPage; SettingsWelcomePage* m_welcomePage; SettingsDatasetsPage* m_datasetsPage; +#ifdef HAVE_KUSERFEEDBACK + KUserFeedback::FeedbackConfigWidget* m_userFeedbackWidget; +#endif + void applySettings(); void restoreDefaults(); signals: void settingsChanged(); void resetWelcomeScreen(); }; #endif