diff --git a/INSTALL b/INSTALL index bc331139..7d4e32a5 100644 --- a/INSTALL +++ b/INSTALL @@ -1,212 +1,218 @@ ---------------------------------- Krusader installation instructions ---------------------------------- --- Note Krusader-2.5.0 versions and higher use libraries like Qt5 and KF5, and will not work anymore on KDE Plasma 4 or older. --- Supported Platforms * All POSIX (Linux®/BSD/UNIX®-like OSes), Solaris™ At the moment, for some libraries like KF5, there are no full ports for Windows or Mac® OS X, which means these platforms are not supported. ======================================== Installation on Linux® and BSD platforms ======================================== --- Preliminary steps if Krusader was already installed If Krusader was already installed: it's better to backup its settings before uninstalling Krusader and installing a new version. Those folders can be backed up (just in case): ~/.local ~/.kde ~/.config --- Krusader dependencies The next packages are needed when running the Krusader binary. This is a list of the package names that Kubuntu/Ubuntu 18.04 (LTS) use, other Linux distros will probably use similar names: - plasma-framework Plasma Runtime components - libc6 GNU C Library: Shared libraries - libgcc1 GCC support library - libqt5dbus5 Qt 5 D-Bus module - libqt5xml5 Qt 5 XML module - libqt5core5 Qt 5 core module - libqt5gui5 Qt 5 GUI module - libqt5printsupport5 Qt 5 print support module - libstdc++6 The GNU Standard C++ Library v3 - zlib1g compression library - runtime --- Suggested packages The next packages are optional but they will make Krusader much more powerful and useful. This is a list of the package names that Debian and Ubuntu/Kubuntu 18.04 (LTS) use, other Linux distros will probably use similar names: - ark archive utility by KDE - bzip2 high-quality block-sorting file compressor - utilities - cpio GNU cpio -- a program to manage archives of files - kate Powerful Text Editor - kde-cli-tools tools required to edit file types from Properties dialog or run Krusader in root mode - keditbookmarks Bookmark manager used for editing bookmarks - kio-extras Enables transparent handling of various archive types such as .tar and network protocols like SFTP - kmail KDE Email client - kdiff3 compares and merges 2 or 3 files or directories or kompare file difference viewer or xxdiff a graphical file and directories comparison and merge tool - konsole X terminal emulator - krename Powerful batch renamer by KDE - md5deep enhanced message digest calculator or cfv versatile file checksum creator and verifier - p7zip 7zr file archiver with high compression ratio - rpm Red Hat package manager - unrar Unarchiver for .rar files (non-free version) or unrar-free Unarchiver for .rar files or rar Archiver for .rar files - unzip De-archiver for .zip files - zip Archiver for .zip files --- Compilation requirements The next packages are needed for compiling the Krusader sourcecode, if you only run the Krusader binary you don't need to install these packages. - build-essential a group of packages needed to compile source code - cmake a cross-platform, open-source make system - extra-cmake-modules extra cmake modules for compiling KDE Frameworks - qt5-default development files for the Qt5 libraries - gettext GNU Internationalization utilities - plasma-framework-dev development files for plasma-framework [in newer versions the name is "libkf5plasma-dev"] - zlib1g-dev in order to make building easier (https://stackoverflow.com/a/49072832) The following packages should install (through dependencies) all the packages you need to compile KF5 software: - kio-dev resource and network access abstraction [in newer versions the name is "libkf5kio-dev"] - libkf5archive-dev development files for karchive - libkf5parts-dev development files for kparts - libkf5wallet-dev development files for kwallet-framework - libkf5xmlgui-dev user configurable main windows - kdoctools-dev development files for kdoctools5 --- Krusader development download Krusader is developed in KDE Extragear. If someone wants to download and use the latest available Krusader sourcecode with git: $ git clone https://anongit.kde.org/krusader Otherwise, if someone wants to use the .tar.xz package: $ tar xvf krusader-xx.xx.tar.xz --- Some CMake options. CMake execution These are some CMake options that can be used, it's not necessary to use them all (later there's an example): -DCMAKE_INSTALL_PREFIX=/usr is the location where Krusader will be installed with the make command. Another example is: -DCMAKE_INSTALL_PRFIX=/opt/krusader to install the compiled Krusader in an other directory to not overwrite the Krusader version installed by your package manager. -DCMAKE_CXX_FLAGS="-O2 -fPIC" this flag is required if you have a 64 bit system -DQT_PLUGIN_INSTALL_DIR= many system force this path to keep kde4 plugins separated from the kde5 ones -DKDESU_PATH=/foo/bar/kdesu this needs to be set on distributions that override default kdesu installation path (libexec/kf5/kdesu) or if your install prefix doesn't match KDE's. -DENABLE_SYNCHRONIZER=OFF disables building the Synchronizer module. This module caused data loss, now it is fixed, but we treat it as the thin ice. In order to make sure that the present folder is the parent directory of the "krusader" source code folder, this command can be executed: ls krusader/krusader and it should answer something like: abstractpanelmanager.h Dialogs kicons.h KrJS krusaderlisterui.rc [...] then CMake can be executed this way: $ mkdir krusader-build $ cd krusader-build $ cmake ../krusader -DCMAKE_INSTALL_PREFIX=/usr/ -DCMAKE_C_FLAGS="-O2 -fPIC" -DCMAKE_CXX_FLAGS="-O2 -fPIC" Note: An example of an output of cmake can be seen in https://phabricator.kde.org/w/krusader/cmake-output/ +Note: If Krusader is going to be built under the 16.04 LTS version of Ubuntu (or Kubuntu, etc.) then +installing Qt 5.9 (or newer) is needed (it could be downloaded from https://www.qt.io/offline-installers) and +the aforementioned cmake command would need (at its end) an additional argument like: + -DCMAKE_PREFIX_PATH=/opt/Qt/5.9/gcc_64/ +if e.g. Qt 5.9 was installed inside /opt + --- Compilation and installation Compilation will take about 5 to 10 minutes depending on your CPU speed. Execute: # Note: On a multi cpu/core system you might want to speed up the compile process by increasing the number of jobs (e.g. `make -j4`) $ make # At the beginning of the following command: `sudo` must be added if Kubuntu, Ubuntu, Debian, or similar is being used $ su -c "make install" Note: An example of an output of make can be seen in https://phabricator.kde.org/w/krusader/make-output/ --- To achieve that Krusader uses another language There is a list of translation files in the [10n.kde.org Krusader page](https://l10n.kde.org/stats/gui/trunk-kf5/po/krusader.po/index.html). In that list anyone can look for his desired translation file, hover the mouse cursor over its link, see its tooltip to look up the appropriate LANGUAGE_CODE (which is shown between parentheses, e.g. if on the tooltip it's seen "German (de)" that means that LANGUAGE_CODE is: de), click on the link (in order to download the proper krusader.po file), and execute: # Transform the downloaded file msgfmt krusader.po -o krusader.mo # At the beginning of the following command: `sudo` must be added if Kubuntu, Ubuntu, Debian, or similar is being used. # In the following command, the text XXXXXXX must be replaced by the LANGUAGE_CODE that was previously found su -c "cp -a krusader.mo /usr/share/locale/XXXXXXX/LC_MESSAGES/" Note: If, in the future, someone would need to automate the downloading of a krusader.po file, he could use: # In the following command, the text XXXXXXX must be replaced by the LANGUAGE_CODE that was previously found $ wget -U "Mozilla/5.0" https://websvn.kde.org/*checkout*/trunk/l10n-kf5/XXXXXXX/messages/extragear-utils/krusader.po --- Execution Finally, Krusader can be executed this way: $ krusader --- Uninstall # At the beginning of the following command: `sudo` must be added if Kubuntu, Ubuntu, Debian, or similar is being used $ su -c "make uninstall" diff --git a/doc/index.docbook b/doc/index.docbook index f926e87b..85d6f16b 100644 --- a/doc/index.docbook +++ b/doc/index.docbook @@ -1,373 +1,389 @@ NFS"> USB"> Samba"> + + +Left"> +Right"> +Up"> +Down"> +Ins"> +Space"> +Home"> +End"> +Meta"> +PgUp"> +PgDn"> +Debian"> +PDF"> + ]> The &krusader; Handbook Davide Gianforte Developer
davide@gengisdave.org
Toni Asensi Esteve Developer
toni.asensi@kdemail.net
Alexander Bikadorov Developer
alex.bikadorov@kdemail.net
Martin Kostolný Developer
clearmartin@gmail.com
Nikita Melnichenko Developer
nikita+kde@melnichenko.name
Yuri Chornoivan Documentation
yurchor@ukr.net
Shie Erlich Author and initial Handbook author (retired)
erlich@users.sourceforge.net
Rafi Yanai Author and initial Handbook author (retired)
yanai@users.sourceforge.net
Csaba Karai Developer (retired)
ckarai@users.sourceforge.net
Heiner Eichmann Developer (retired)
h.eichmann@gmx.de
Jonas Bähr Developer (retired)
jonas.baehr@web.de
Václav Jůza Developer (retired)
vaclavjuza@seznam.cz
Simon Persson Developer (retired)
simon.persson@mykolab.com
Jan Lepper Developer (retired)
jan_lepper@gmx.de
Andrey Matveyakin Developer (retired)
a.matveyakin@gmail.com
Dirk Eschler Webmaster (retired)
deschler@users.sourceforge.net
Frank Schoolmeesters Documentation and Marketing coordinator (retired)
frank_schoolmeesters@yahoo.com
Richard Holt Documentation and Proofing (retired)
richard.holt@gmail.com
Matej Urbančič Marketing and Product Research (retired)
matej.urban@gmail.com
2000 2001 2002 2003 Rafi Yanai Shie Erlich 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 Krusader Krew Permission is granted to copy, distribute and/or modify this document under the terms of the &GNU; Free Documentation License, Version 1.1 or any later version published by the Free Software Foundation; with no Invariant Sections, with no Front-Cover Texts, and with no Back-Cover Texts. A copy of the license is included in the &krusader; sources. 2019-08-25 2.7.2 &krusader; is an advanced, twin-panel (commander-style) file-manager for Plasma and other desktops in the *nix world KDE krusader commander filemanager twinpanel linux file manager dual pane linux-commander kde-commander &help; &editors-note; &introduction; &features; &user-interface; &basic-functions; &advanced-functions; &menu-commands; &keyboard-commands; &mouse-commands; &krusader-tools; &konfigurator; &faq; &credits-and-license; &configuration-files; &useraction-xml; &release-overview; &glossary; &documentation.index; diff --git a/krArc/krarc.cpp b/krArc/krarc.cpp index 7b49f2da..a0265b80 100644 --- a/krArc/krarc.cpp +++ b/krArc/krarc.cpp @@ -1,1938 +1,1939 @@ /***************************************************************************** * Copyright (C) 2003 Rafi Yanai * * Copyright (C) 2003 Shie Erlich * * Copyright (C) 2004-2019 Krusader Krew [https://krusader.org] * * * * This file is part of Krusader [https://krusader.org]. * * * * Krusader is free software: you can redistribute it and/or modify * * it under the terms of the GNU General Public License as published by * * the Free Software Foundation, either version 2 of the License, or * * (at your option) any later version. * * * * Krusader is distributed in the hope that it will be useful, * * but WITHOUT ANY WARRANTY; without even the implied warranty of * * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * * GNU General Public License for more details. * * * * You should have received a copy of the GNU General Public License * * along with Krusader. If not, see [http://www.gnu.org/licenses/]. * *****************************************************************************/ #include "krarc.h" #include "../krusader/defaults.h" // QtCore #include +#include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "../krusader/compat.h" #define MAX_IPC_SIZE (1024*32) #define TRIES_WITH_PASSWORDS 3 using namespace KIO; extern "C" { #ifdef KRARC_ENABLED /* This codec is for being able to handle files which encoding differs from the current locale. * * Unfortunately QProcess requires QString parameters for arguments which are encoded to Local8Bit * If we want to use unzip with ISO-8852-2 when the current locale is UTF-8, it will cause problems. * * Workaround: * 1. encode the QString to QByteArray ( according to the selected remote encoding, ISO-8852-2 ) * 2. encode QByteArray to QString again * unicode 0xE000-0xF7FF is for private use * the byte array is mapped to 0xE000-0xE0FF unicodes * 3. KrArcCodec maps 0xE000-0xE0FF to 0x0000-0x00FF, while calls the default encoding routine * for other unicodes. */ class KrArcCodec : public QTextCodec { public: KrArcCodec(QTextCodec * codec) : originalCodec(codec) {} ~KrArcCodec() override = default; QByteArray name() const override { return originalCodec->name(); } QList aliases() const override { return originalCodec->aliases(); } int mibEnum() const override { return originalCodec->mibEnum(); } protected: QString convertToUnicode(const char *in, int length, ConverterState *state) const override { return originalCodec->toUnicode(in, length, state); } QByteArray convertFromUnicode(const QChar *in, int length, ConverterState *state) const override { // the QByteArray is embedded into the unicode charset (QProcess hell) QByteArray result; for (int i = 0; i != length; i++) { if (((in[ i ].unicode()) & 0xFF00) == 0xE000) // map 0xE000-0xE0FF to 0x0000-0x00FF result.append((char)(in[ i ].unicode() & 0xFF)); else result.append(originalCodec->fromUnicode(in + i, 1, state)); } return result; } private: QTextCodec * originalCodec; } *krArcCodec; #define SET_KRCODEC QTextCodec *origCodec = QTextCodec::codecForLocale(); \ QTextCodec::setCodecForLocale( krArcCodec ); #define RESET_KRCODEC QTextCodec::setCodecForLocale( origCodec ); #endif // KRARC_ENABLED class DummySlave : public KIO::SlaveBase { public: DummySlave(const QByteArray &pool_socket, const QByteArray &app_socket) : SlaveBase("kio_krarc", pool_socket, app_socket) { error((int)ERR_SLAVE_DEFINED, QString("krarc is disabled.")); } }; int Q_DECL_EXPORT kdemain(int argc, char **argv) { if (argc != 4) { qWarning() << "Usage: kio_krarc protocol domain-socket1 domain-socket2" << endl; exit(-1); } // At least, that fixes the empty name in the warning that says: Please fix the "" KIO slave // There is more information in https://bugs.kde.org/show_bug.cgi?id=384653 QCoreApplication app(argc, argv); app.setApplicationName(QStringLiteral("kio_krarc")); #ifdef KRARC_ENABLED kio_krarcProtocol slave(argv[2], argv[3]); #else DummySlave slave(argv[2], argv[3]); #endif slave.dispatchLoop(); return 0; } } // extern "C" #ifdef KRARC_ENABLED kio_krarcProtocol::kio_krarcProtocol(const QByteArray &pool_socket, const QByteArray &app_socket) : SlaveBase("kio_krarc", pool_socket, app_socket), archiveChanged(true), arcFile(nullptr), extArcReady(false), password(QString()), krConf("krusaderrc"), codec(nullptr) { KRFUNC; confGrp = KConfigGroup(&krConf, "Dependencies"); KConfigGroup group(&krConf, "General"); QString tmpDirPath = group.readEntry("Temp Directory", _TempDirectory); QDir tmpDir(tmpDirPath); if(!tmpDir.exists()) { for (int i = 1 ; i != -1 ; i = tmpDirPath.indexOf('/', i + 1)) QDir().mkdir(tmpDirPath.left(i)); QDir().mkdir(tmpDirPath); } arcTempDir = tmpDirPath + DIR_SEPARATOR; QString dirName = "krArc" + QDateTime::currentDateTime().toString(Qt::ISODate); dirName.replace(QRegExp(":"), "_"); tmpDir.mkdir(dirName); arcTempDir = arcTempDir + dirName + DIR_SEPARATOR; krArcCodec = new KrArcCodec(QTextCodec::codecForLocale()); } /* ---------------------------------------------------------------------------------- */ kio_krarcProtocol::~kio_krarcProtocol() { KRFUNC; // delete the temp directory KProcess proc; proc << fullPathName("rm") << "-rf" << arcTempDir; proc.start(); proc.waitForFinished(); } /* ---------------------------------------------------------------------------------- */ bool kio_krarcProtocol::checkWriteSupport() { KRFUNC; krConf.reparseConfiguration(); if (KConfigGroup(&krConf, "kio_krarc").readEntry("EnableWrite", false)) return true; else { error(ERR_UNSUPPORTED_ACTION, i18n("krarc: write support is disabled.\n" "You can enable it on the 'Archives' page in Konfigurator.")); return false; } } void kio_krarcProtocol::receivedData(KProcess *, QByteArray &d) { KRFUNC; const QByteArray& buf(d); data(buf); processedSize(d.length()); decompressedLen += d.length(); } void kio_krarcProtocol::mkdir(const QUrl &url, int permissions) { KRFUNC; const QString path = getPath(url); KRDEBUG(path); if (!checkWriteSupport()) return; // In case of KIO::mkpath call there is a mkdir call for every path element. // Therefore the path all the way up to our archive needs to be checked for existence // and reported as success. if (QDir().exists(path)) { finished(); return; } if (!setArcFile(url)) { error(ERR_CANNOT_ENTER_DIRECTORY, path); return; } if (newArchiveURL && !initDirDict(url)) { error(ERR_CANNOT_ENTER_DIRECTORY, path); return; } if (putCmd.isEmpty()) { error(ERR_UNSUPPORTED_ACTION, i18n("Creating folders is not supported with %1 archives", arcType)); return; } const QString arcFilePath = getPath(arcFile->url()); if (arcType == "arj" || arcType == "lha") { QString arcDir = path.mid(arcFilePath.length()); if (arcDir.right(1) != DIR_SEPARATOR) arcDir = arcDir + DIR_SEPARATOR; if (dirDict.find(arcDir) == dirDict.end()) addNewDir(arcDir); finished(); return; } QString arcDir = findArcDirectory(url); QString tempDir = arcDir.mid(1) + path.mid(path.lastIndexOf(DIR_SEPARATOR) + 1); if (tempDir.right(1) != DIR_SEPARATOR) tempDir = tempDir + DIR_SEPARATOR; if (permissions == -1) permissions = 0777; //set default permissions QByteArray arcTempDirEnc = arcTempDir.toLocal8Bit(); for (int i = 0;i < tempDir.length() && i >= 0; i = tempDir.indexOf(DIR_SEPARATOR, i + 1)) { QByteArray newDirs = encodeString(tempDir.left(i)); newDirs.prepend(arcTempDirEnc); QT_MKDIR(newDirs, permissions); } if (tempDir.endsWith(DIR_SEPARATOR)) tempDir.truncate(tempDir.length() - 1); // pack the directory KrLinecountingProcess proc; proc << putCmd << arcFilePath << localeEncodedString(tempDir); infoMessage(i18n("Creating %1...", url.fileName())); QDir::setCurrent(arcTempDir); SET_KRCODEC proc.start(); RESET_KRCODEC proc.waitForFinished(); // delete the temp directory QDir().rmdir(arcTempDir); if (proc.exitStatus() != QProcess::NormalExit || !checkStatus(proc.exitCode())) { error(ERR_CANNOT_WRITE, path + "\n\n" + proc.getErrorMsg()); return; } // force a refresh of archive information initDirDict(url, true); finished(); } void kio_krarcProtocol::put(const QUrl &url, int permissions, KIO::JobFlags flags) { KRFUNC; KRDEBUG(getPath(url)); if (!checkWriteSupport()) return; bool overwrite = !!(flags & KIO::Overwrite); bool resume = !!(flags & KIO::Resume); if (!setArcFile(url)) { error(ERR_CANNOT_ENTER_DIRECTORY, getPath(url)); return; } if (newArchiveURL && !initDirDict(url)) { error(ERR_CANNOT_ENTER_DIRECTORY, getPath(url)); return; } if (putCmd.isEmpty()) { error(ERR_UNSUPPORTED_ACTION, i18n("Writing to %1 archives is not supported", arcType)); return; } if (!overwrite && findFileEntry(url)) { error(ERR_FILE_ALREADY_EXIST, getPath(url)); return; } QString arcDir = findArcDirectory(url); if (arcDir.isEmpty()) KRDEBUG("arcDir is empty."); QString tempFile = arcDir.mid(1) + getPath(url).mid(getPath(url).lastIndexOf(DIR_SEPARATOR) + 1); QString tempDir = arcDir.mid(1); if (tempDir.right(1) != DIR_SEPARATOR) tempDir = tempDir + DIR_SEPARATOR; if (permissions == -1) permissions = 0777; //set default permissions QByteArray arcTempDirEnc = arcTempDir.toLocal8Bit(); for (int i = 0;i < tempDir.length() && i >= 0; i = tempDir.indexOf(DIR_SEPARATOR, i + 1)) { QByteArray newDirs = encodeString(tempDir.left(i)); newDirs.prepend(arcTempDirEnc); QT_MKDIR(newDirs, 0755); } int fd; if (resume) { QByteArray ba = encodeString(tempFile); ba.prepend(arcTempDirEnc); fd = QT_OPEN(ba, O_RDWR); // append if resuming QT_LSEEK(fd, 0, SEEK_END); // Seek to end } else { // WABA: Make sure that we keep writing permissions ourselves, // otherwise we can be in for a surprise on NFS. mode_t initialMode; if (permissions != -1) initialMode = permissions | S_IWUSR | S_IRUSR; else initialMode = 0666; QByteArray ba = encodeString(tempFile); ba.prepend(arcTempDirEnc); fd = QT_OPEN(ba, O_CREAT | O_TRUNC | O_WRONLY, initialMode); } QByteArray buffer; int readResult; bool isIncomplete = false; do { dataReq(); readResult = readData(buffer); auto bytesWritten = ::write(fd, buffer.data(), buffer.size()); if (bytesWritten < buffer.size()) { isIncomplete = true; break; } } while (readResult > 0); ::close(fd); if (isIncomplete) { error(ERR_CANNOT_WRITE, getPath(url)); return; } // pack the file KrLinecountingProcess proc; proc << putCmd << getPath(arcFile->url()) << localeEncodedString(tempFile); infoMessage(i18n("Packing %1...", url.fileName())); QDir::setCurrent(arcTempDir); SET_KRCODEC proc.start(); RESET_KRCODEC proc.waitForFinished(); // remove the files QDir().rmdir(arcTempDir); if (proc.exitStatus() != QProcess::NormalExit || !checkStatus(proc.exitCode())) { error(ERR_CANNOT_WRITE, getPath(url) + "\n\n" + proc.getErrorMsg()); return; } // force a refresh of archive information initDirDict(url, true); finished(); } void kio_krarcProtocol::get(const QUrl &url) { KRFUNC; get(url, TRIES_WITH_PASSWORDS); } void kio_krarcProtocol::get(const QUrl &url, int tries) { KRFUNC; KRDEBUG(getPath(url)); bool decompressToFile = false; if (!setArcFile(url)) { error(ERR_CANNOT_ENTER_DIRECTORY, getPath(url)); return; } if (newArchiveURL && !initDirDict(url)) { error(ERR_CANNOT_ENTER_DIRECTORY, getPath(url)); return; } if (getCmd.isEmpty()) { error(ERR_UNSUPPORTED_ACTION, i18n("Retrieving data from %1 archives is not supported", arcType)); return; } UDSEntry* entry = findFileEntry(url); if (!entry) { error(KIO::ERR_DOES_NOT_EXIST, getPath(url)); return; } if (KFileItem(*entry, url).isDir()) { error(KIO::ERR_IS_DIRECTORY, getPath(url)); return; } KIO::filesize_t expectedSize = KFileItem(*entry, url).size(); // for RPM files extract the cpio file first if (!extArcReady && arcType == "rpm") { KrLinecountingProcess cpio; cpio << "rpm2cpio" << getPath(arcFile->url(), QUrl::StripTrailingSlash); cpio.setStandardOutputFile(arcTempDir + "contents.cpio"); cpio.start(); cpio.waitForFinished(); if (cpio.exitStatus() != QProcess::NormalExit || !checkStatus(cpio.exitCode())) { error(ERR_CANNOT_READ, getPath(url) + "\n\n" + cpio.getErrorMsg()); return; } extArcReady = true; } // for DEB files extract the tar file first if (!extArcReady && arcType == "deb") { KrLinecountingProcess dpkg; dpkg << cmd << "--fsys-tarfile" << getPath(arcFile->url(), QUrl::StripTrailingSlash); dpkg.setStandardOutputFile(arcTempDir + "contents.cpio"); dpkg.start(); dpkg.waitForFinished(); if (dpkg.exitStatus() != QProcess::NormalExit || !checkStatus(dpkg.exitCode())) { error(ERR_CANNOT_READ, getPath(url) + "\n\n" + dpkg.getErrorMsg()); return; } extArcReady = true; } // Use the external unpacker to unpack the file QString file = getPath(url).mid(getPath(arcFile->url()).length() + 1); KrLinecountingProcess proc; if (extArcReady) { proc << getCmd << arcTempDir + "contents.cpio" << '*' + localeEncodedString(file); } else if (arcType == "arj" || arcType == "ace" || arcType == "7z") { proc << getCmd << getPath(arcFile->url(), QUrl::StripTrailingSlash) << localeEncodedString(file); if (arcType == "ace" && QFile("/dev/ptmx").exists()) // Don't remove, unace crashes if missing!!! proc.setStandardInputFile("/dev/ptmx"); file = url.fileName(); decompressToFile = true; } else { decompressedLen = 0; // Determine the mimetype of the file to be retrieved, and emit it. // This is mandatory in all slaves (for KRun/BrowserRun to work). QMimeDatabase db; QMimeType mt = db.mimeTypeForFile(arcTempDir + file); if (mt.isValid()) emit mimeType(mt.name()); QString escapedFilename = file; if(arcType == "zip") // left bracket needs to be escaped escapedFilename.replace('[', "[[]"); proc << getCmd << getPath(arcFile->url()); if (arcType != "gzip" && arcType != "bzip2" && arcType != "lzma" && arcType != "xz") proc << localeEncodedString(escapedFilename); connect(&proc, &KrLinecountingProcess::newOutputData, this, &kio_krarcProtocol::receivedData); proc.setMerge(false); } infoMessage(i18n("Unpacking %1...", url.fileName())); // change the working directory to our arcTempDir QDir::setCurrent(arcTempDir); SET_KRCODEC proc.setTextModeEnabled(false); proc.start(); RESET_KRCODEC proc.waitForFinished(); if (!extArcReady && !decompressToFile) { if (proc.exitStatus() != QProcess::NormalExit || !checkStatus(proc.exitCode()) || (arcType != "bzip2" && arcType != "lzma" && arcType != "xz" && expectedSize != decompressedLen)) { if (encrypted && tries) { invalidatePassword(); get(url, tries - 1); return; } error(KIO::ERR_ACCESS_DENIED, getPath(url) + "\n\n" + proc.getErrorMsg()); return; } } else { if (proc.exitStatus() != QProcess::NormalExit || !checkStatus(proc.exitCode()) || !QFileInfo(arcTempDir + file).exists()) { if (decompressToFile) QFile(arcTempDir + file).remove(); if (encrypted && tries) { invalidatePassword(); get(url, tries - 1); return; } error(KIO::ERR_ACCESS_DENIED, getPath(url)); return; } // the following block is ripped from KDE file KIO::Slave // $Id: krarc.cpp,v 1.43 2007/01/13 13:39:51 ckarai Exp $ QByteArray _path(QFile::encodeName(arcTempDir + file)); QT_STATBUF buff; if (QT_LSTAT(_path.data(), &buff) == -1) { if (errno == EACCES) error(KIO::ERR_ACCESS_DENIED, getPath(url)); else error(KIO::ERR_DOES_NOT_EXIST, getPath(url)); return; } if (S_ISDIR(buff.st_mode)) { error(KIO::ERR_IS_DIRECTORY, getPath(url)); return; } if (!S_ISREG(buff.st_mode)) { error(KIO::ERR_CANNOT_OPEN_FOR_READING, getPath(url)); return; } int fd = QT_OPEN(_path.data(), O_RDONLY); if (fd < 0) { error(KIO::ERR_CANNOT_OPEN_FOR_READING, getPath(url)); return; } // Determine the mimetype of the file to be retrieved, and emit it. // This is mandatory in all slaves (for KRun/BrowserRun to work). QMimeDatabase db; QMimeType mt = db.mimeTypeForFile(arcTempDir + file); if (mt.isValid()) emit mimeType(mt.name()); KIO::filesize_t processed_size = 0; QString resumeOffset = metaData("resume"); if (!resumeOffset.isEmpty()) { bool ok; KIO::fileoffset_t offset = resumeOffset.toLongLong(&ok); if (ok && (offset > 0) && (offset < buff.st_size)) { if (QT_LSEEK(fd, offset, SEEK_SET) == offset) { canResume(); processed_size = offset; } } } totalSize(buff.st_size); char buffer[ MAX_IPC_SIZE ]; while (1) { int n = ::read(fd, buffer, MAX_IPC_SIZE); if (n == -1) { if (errno == EINTR) continue; error(KIO::ERR_CANNOT_READ, getPath(url)); ::close(fd); return; } if (n == 0) break; // Finished { QByteArray array = QByteArray::fromRawData(buffer, n); data(array); } processed_size += n; } data(QByteArray()); ::close(fd); processedSize(buff.st_size); finished(); if (decompressToFile) QFile(arcTempDir + file).remove(); return; } // send empty buffer to mark EOF data(QByteArray()); finished(); } void kio_krarcProtocol::del(QUrl const & url, bool isFile) { KRFUNC; KRDEBUG(getPath(url)); if (!checkWriteSupport()) return; if (!setArcFile(url)) { error(ERR_CANNOT_ENTER_DIRECTORY, getPath(url)); return; } if (newArchiveURL && !initDirDict(url)) { error(ERR_CANNOT_ENTER_DIRECTORY, getPath(url)); return; } if (delCmd.isEmpty()) { error(ERR_UNSUPPORTED_ACTION, i18n("Deleting files from %1 archives is not supported", arcType)); return; } if (!findFileEntry(url)) { if ((arcType != "arj" && arcType != "lha") || isFile) { error(KIO::ERR_DOES_NOT_EXIST, getPath(url)); return; } } QString file = getPath(url).mid(getPath(arcFile->url()).length() + 1); if (!isFile && file.right(1) != DIR_SEPARATOR) { if (arcType == "zip") file = file + DIR_SEPARATOR; } KrLinecountingProcess proc; proc << delCmd << getPath(arcFile->url()) << localeEncodedString(file); infoMessage(i18n("Deleting %1...", url.fileName())); SET_KRCODEC proc.start(); RESET_KRCODEC proc.waitForFinished(); if (proc.exitStatus() != QProcess::NormalExit || !checkStatus(proc.exitCode())) { error(ERR_CANNOT_WRITE, getPath(url) + "\n\n" + proc.getErrorMsg()); return; } // force a refresh of archive information initDirDict(url, true); finished(); } void kio_krarcProtocol::stat(const QUrl &url) { KRFUNC; KRDEBUG(getPath(url)); if (!setArcFile(url)) { error(ERR_CANNOT_ENTER_DIRECTORY, getPath(url)); return; } if (newArchiveURL && !initDirDict(url)) { error(ERR_CANNOT_ENTER_DIRECTORY, getPath(url)); return; } if (listCmd.isEmpty()) { error(ERR_UNSUPPORTED_ACTION, i18n("Accessing files is not supported with %1 archives", arcType)); return; } QString path = getPath(url, QUrl::StripTrailingSlash); QUrl newUrl = url; // but treat the archive itself as the archive root if (path == getPath(arcFile->url(), QUrl::StripTrailingSlash)) { newUrl.setPath(path + DIR_SEPARATOR); path = getPath(newUrl); } // we might be stating a real file if (QFileInfo(path).exists()) { QT_STATBUF buff; QT_STAT(path.toLocal8Bit(), &buff); QString mime; QMimeDatabase db; QMimeType result = db.mimeTypeForFile(path); if (result.isValid()) mime = result.name(); statEntry(KFileItem(QUrl::fromLocalFile(path), mime, buff.st_mode).entry()); finished(); return; } UDSEntry* entry = findFileEntry(newUrl); if (entry) { statEntry(*entry); finished(); } else error(KIO::ERR_DOES_NOT_EXIST, path); } void kio_krarcProtocol::copy(const QUrl &url, const QUrl &dest, int, KIO::JobFlags flags) { KRDEBUG("source: " << url.path() << " dest: " << dest.path()); if (!checkWriteSupport()) return; bool overwrite = !!(flags & KIO::Overwrite); // KDE HACK: opening the password dlg in copy causes error for the COPY, and further problems // that's why encrypted files are not allowed to copy if (!encrypted && dest.isLocalFile()) do { if (url.fileName() != dest.fileName()) break; if (QTextCodec::codecForLocale()->name() != codec->name()) break; //the file exists and we don't want to overwrite if ((!overwrite) && (QFile(getPath(dest)).exists())) { error((int)ERR_FILE_ALREADY_EXIST, QString(QFile::encodeName(getPath(dest)))); return; }; if (!setArcFile(url)) { error(ERR_CANNOT_ENTER_DIRECTORY, getPath(url)); return; } if (newArchiveURL && !initDirDict(url)) { error(ERR_CANNOT_ENTER_DIRECTORY, getPath(url)); return; } UDSEntry* entry = findFileEntry(url); if (copyCmd.isEmpty() || !entry) break; QString file = getPath(url).mid(getPath(arcFile->url()).length() + 1); QString destDir = getPath(dest, QUrl::StripTrailingSlash); if (!QDir(destDir).exists()) { int ndx = destDir.lastIndexOf(DIR_SEPARATOR_CHAR); if (ndx != -1) destDir.truncate(ndx + 1); } QDir::setCurrent(destDir); QString escapedFilename = file; if(arcType == "zip") { // left bracket needs to be escaped escapedFilename.replace('[', "[[]"); } KrLinecountingProcess proc; proc << copyCmd << getPath(arcFile->url(), QUrl::StripTrailingSlash) << escapedFilename; if (arcType == "ace" && QFile("/dev/ptmx").exists()) // Don't remove, unace crashes if missing!!! proc.setStandardInputFile("/dev/ptmx"); proc.setOutputChannelMode(KProcess::SeparateChannels); // without this output redirection has no effect infoMessage(i18n("Unpacking %1...", url.fileName())); proc.start(); proc.waitForFinished(); if (proc.exitStatus() != QProcess::NormalExit || !checkStatus(proc.exitCode())) { error(KIO::ERR_CANNOT_WRITE, getPath(dest, QUrl::StripTrailingSlash) + "\n\n" + proc.getErrorMsg()); return; } if (!QFileInfo(getPath(dest, QUrl::StripTrailingSlash)).exists()) { error(KIO::ERR_CANNOT_WRITE, getPath(dest, QUrl::StripTrailingSlash)); return; } processedSize(KFileItem(*entry, url).size()); finished(); QDir::setCurrent(QDir::rootPath()); /* for being able to umount devices after copying*/ return; } while (0); if (encrypted) KRDEBUG("ERROR: " << url.path() << " is encrypted."); if (!dest.isLocalFile()) KRDEBUG("ERROR: " << url.path() << " is not a local file."); // CMD_COPY is no more in KF5 - replaced with 74 value (as stated in kio/src/core/commands_p.h, which could be found in cgit.kde.org/kio.git/tree) error(ERR_UNSUPPORTED_ACTION, unsupportedActionErrorString(mProtocol, 74)); } void kio_krarcProtocol::rename(const QUrl& src, const QUrl& dest, KIO::JobFlags flags) { Q_UNUSED(flags); KRDEBUG("renaming from: " << src.path() << " to: " << dest.path()); KRDEBUG("command: " << arcPath); if (!checkWriteSupport()) { return; } if (renCmd.isEmpty()) { error(KIO::ERR_CANNOT_RENAME, src.fileName()); return; } if (src.fileName() == dest.fileName()) { return; } KrLinecountingProcess proc; proc << renCmd << arcPath << src.path().remove(arcPath + '/') << dest.path().remove(arcPath + '/'); proc.start(); proc.waitForFinished(); if (proc.exitStatus() != QProcess::NormalExit || !checkStatus(proc.exitCode())) { error(KIO::ERR_CANNOT_RENAME, src.fileName()); return; } finished(); } void kio_krarcProtocol::listDir(const QUrl &url) { KRFUNC; KRDEBUG(getPath(url)); if (!setArcFile(url)) { error(ERR_CANNOT_ENTER_DIRECTORY, getPath(url)); return; } if (listCmd.isEmpty()) { error(ERR_UNSUPPORTED_ACTION, i18n("Listing folders is not supported for %1 archives", arcType)); return; } QString path = getPath(url); if (path.right(1) != DIR_SEPARATOR) path = path + DIR_SEPARATOR; // it might be a real dir ! if (QFileInfo(path).exists()) { if (QFileInfo(path).isDir()) { QUrl redir; redir.setPath(getPath(url)); redirection(redir); finished(); } else { // maybe it's an archive ! error(ERR_IS_FILE, path); } return; } if (!initDirDict(url)) { error(ERR_CANNOT_ENTER_DIRECTORY, getPath(url)); return; } QString arcDir = path.mid(getPath(arcFile->url()).length()); arcDir.truncate(arcDir.lastIndexOf(DIR_SEPARATOR)); if (arcDir.right(1) != DIR_SEPARATOR) arcDir = arcDir + DIR_SEPARATOR; if (dirDict.find(arcDir) == dirDict.end()) { error(ERR_CANNOT_ENTER_DIRECTORY, getPath(url)); return; } UDSEntryList* dirList = dirDict[ arcDir ]; totalSize(dirList->size()); listEntries(*dirList); finished(); } bool kio_krarcProtocol::setArcFile(const QUrl &url) { KRFUNC; KRDEBUG(url.fileName()); QString path = getPath(url); time_t currTime = time(nullptr); archiveChanged = true; newArchiveURL = true; // is the file already set ? if (arcFile && getPath(arcFile->url(), QUrl::StripTrailingSlash) == path.left(getPath(arcFile->url(), QUrl::StripTrailingSlash).length())) { newArchiveURL = false; // Has it changed ? KFileItem* newArcFile = new KFileItem(arcFile->url(), QString(), arcFile->mode()); if (metaData("Charset") != currentCharset || !newArcFile->cmp(*arcFile)) { currentCharset = metaData("Charset"); codec = QTextCodec::codecForName(currentCharset.toLatin1()); if (codec == nullptr) codec = QTextCodec::codecForMib(4 /* latin-1 */); delete arcFile; password.clear(); extArcReady = false; arcFile = newArcFile; } else { // same old file delete newArcFile; archiveChanged = false; if (encrypted && password.isNull()) initArcParameters(); } } else { // it's a new file... extArcReady = false; // new archive file means new dirDict, too dirDict.clear(); if (arcFile) { delete arcFile; password.clear(); arcFile = nullptr; } QString newPath = path; if (newPath.right(1) != DIR_SEPARATOR) newPath = newPath + DIR_SEPARATOR; for (int pos = 0; pos >= 0; pos = newPath.indexOf(DIR_SEPARATOR, pos + 1)) { QFileInfo qfi(newPath.left(pos)); if (qfi.exists() && !qfi.isDir()) { QT_STATBUF stat_p; QT_LSTAT(newPath.left(pos).toLocal8Bit(), &stat_p); arcFile = new KFileItem(QUrl::fromLocalFile(newPath.left(pos)), QString(), stat_p.st_mode); break; } } if (!arcFile) { // KRDEBUG("ERROR: " << path << " does not exist."); error(ERR_DOES_NOT_EXIST, path); return false; // file not found } currentCharset = metaData("Charset"); codec = QTextCodec::codecForName(currentCharset.toLatin1()); if (codec == nullptr) codec = QTextCodec::codecForMib(4 /* latin-1 */); } /* FIX: file change can only be detected if the timestamp between the two consequent changes is more than 1s. If the archive is continuously changing (check: move files inside the archive), krarc may errorneusly think, that the archive file is unchanged, because the timestamp is the same as the previous one. This situation can only occur if the modification time equals with the current time. While this condition is true, we can say, that the archive is changing, so content reread is always necessary during that period. */ if (archiveChanging) archiveChanged = true; archiveChanging = (currTime == (time_t)arcFile->time(KFileItem::ModificationTime).toTime_t()); arcPath = getPath(arcFile->url(), QUrl::StripTrailingSlash); arcType = detectArchive(encrypted, arcPath); if (arcType == "tbz") arcType = "bzip2"; else if (arcType == "tgz") arcType = "gzip"; else if (arcType == "tlz") arcType = "lzma"; else if (arcType == "txz") arcType = "xz"; if (arcType.isEmpty()) { arcType = arcFile->mimetype(); arcType = getShortTypeFromMime(arcType); if (arcType == "jar") arcType = "zip"; } return initArcParameters(); } bool kio_krarcProtocol::initDirDict(const QUrl &url, bool forced) { KRFUNC; KRDEBUG(getPath(url)); // set the archive location //if( !setArcFile(getPath(url)) ) return false; // no need to rescan the archive if it's not changed // KRDEBUG("achiveChanged: " << archiveChanged << " forced: " << forced); if (!archiveChanged && !forced) { // KRDEBUG("doing nothing."); return true; } extArcReady = false; if (!setArcFile(url)) return false; /* if the archive was changed refresh the file information */ // write the temp file KrLinecountingProcess proc; QTemporaryFile temp; // parse the temp file if (!temp.open()) { error(ERR_CANNOT_READ, temp.fileName()); return false; } if (arcType != "bzip2" && arcType != "lzma" && arcType != "xz") { if (arcType == "rpm") { proc << listCmd << arcPath; proc.setStandardOutputFile(temp.fileName()); } else { proc << listCmd << getPath(arcFile->url(), QUrl::StripTrailingSlash); proc.setStandardOutputFile(temp.fileName()); } if (arcType == "ace" && QFile("/dev/ptmx").exists()) // Don't remove, unace crashes if missing!!! proc.setStandardInputFile("/dev/ptmx"); proc.setOutputChannelMode(KProcess::SeparateChannels); // without this output redirection has no effect proc.start(); proc.waitForFinished(); if (proc.exitStatus() != QProcess::NormalExit || !checkStatus(proc.exitCode())) return false; } // clear the dir dictionary QHashIterator< QString, KIO::UDSEntryList *> lit(dirDict); while (lit.hasNext()) delete lit.next().value(); dirDict.clear(); // add the "/" directory auto* root = new UDSEntryList(); dirDict.insert(DIR_SEPARATOR, root); // and the "/" UDSEntry UDSEntry entry; entry.UDS_ENTRY_INSERT(KIO::UDSEntry::UDS_NAME, "."); mode_t mode = parsePermString("drwxr-xr-x"); entry.UDS_ENTRY_INSERT(KIO::UDSEntry::UDS_FILE_TYPE, mode & S_IFMT); // keep file type only entry.UDS_ENTRY_INSERT(KIO::UDSEntry::UDS_ACCESS, mode & 07777); // keep permissions only root->append(entry); if (arcType == "bzip2" || arcType == "lzma" || arcType == "xz") abort(); char buf[1000]; QString line; int lineNo = 0; bool invalidLine = false; // the rar list is started with a ------ line. if (arcType == "rar" || arcType == "arj" || arcType == "lha" || arcType == "7z") { while (temp.readLine(buf, 1000) != -1) { line = decodeString(buf); if (line.startsWith(QLatin1String("----------"))) break; } } while (temp.readLine(buf, 1000) != -1) { line = decodeString(buf); if (arcType == "rar") { // the rar list is ended with a ------ line. if (line.startsWith(QLatin1String("----------"))) { invalidLine = !invalidLine; break; } if (invalidLine) continue; else { if (line[0] == '*') // encrypted archives starts with '*' line[0] = ' '; } } if (arcType == "ace") { // the ace list begins with a number. if (!line[0].isDigit()) continue; } if (arcType == "arj") { // the arj list is ended with a ------ line. if (line.startsWith(QLatin1String("----------"))) { invalidLine = !invalidLine; continue; } if (invalidLine) continue; else { temp.readLine(buf, 1000); line = line + decodeString(buf); temp.readLine(buf, 1000); line = line + decodeString(buf); temp.readLine(buf, 1000); line = line + decodeString(buf); } } if (arcType == "lha" || arcType == "7z") { // the arj list is ended with a ------ line. if (line.startsWith(QLatin1String("----------"))) break; } parseLine(lineNo++, line.trimmed()); } // close and delete our file temp.close(); archiveChanged = false; // KRDEBUG("done."); return true; } QString kio_krarcProtocol::findArcDirectory(const QUrl &url) { KRFUNC; KRDEBUG(url.fileName()); QString path = getPath(url); if (path.right(1) == DIR_SEPARATOR) path.truncate(path.length() - 1); if (!initDirDict(url)) { return QString(); } QString arcDir = path.mid(getPath(arcFile->url()).length()); arcDir.truncate(arcDir.lastIndexOf(DIR_SEPARATOR)); if (arcDir.right(1) != DIR_SEPARATOR) arcDir = arcDir + DIR_SEPARATOR; return arcDir; } UDSEntry* kio_krarcProtocol::findFileEntry(const QUrl &url) { KRFUNC; QString arcDir = findArcDirectory(url); if (arcDir.isEmpty()) return nullptr; QHash::iterator itef = dirDict.find(arcDir); if (itef == dirDict.end()) return nullptr; UDSEntryList* dirList = itef.value(); QString name = getPath(url); if (getPath(arcFile->url(), QUrl::StripTrailingSlash) == getPath(url, QUrl::StripTrailingSlash)) name = '.'; // the '/' case else { if (name.right(1) == DIR_SEPARATOR) name.truncate(name.length() - 1); name = name.mid(name.lastIndexOf(DIR_SEPARATOR) + 1); } UDSEntryList::iterator entry; for (entry = dirList->begin(); entry != dirList->end(); ++entry) { if ((entry->contains(KIO::UDSEntry::UDS_NAME)) && (entry->stringValue(KIO::UDSEntry::UDS_NAME) == name)) return &(*entry); } return nullptr; } QString kio_krarcProtocol::nextWord(QString &s, char d) { // Note: KRFUNC was not used here in order to avoid filling the log with too much information s = s.trimmed(); int j = s.indexOf(d, 0); QString temp = s.left(j); // find the leftmost word. s.remove(0, j); return temp; } mode_t kio_krarcProtocol::parsePermString(QString perm) { KRFUNC; mode_t mode = 0; // file type if (perm[0] == 'd') mode |= S_IFDIR; #ifndef Q_OS_WIN if (perm[0] == 'l') mode |= S_IFLNK; #endif if (perm[0] == '-') mode |= S_IFREG; // owner permissions if (perm[1] != '-') mode |= S_IRUSR; if (perm[2] != '-') mode |= S_IWUSR; if (perm[3] != '-') mode |= S_IXUSR; #ifndef Q_OS_WIN // group permissions if (perm[4] != '-') mode |= S_IRGRP; if (perm[5] != '-') mode |= S_IWGRP; if (perm[6] != '-') mode |= S_IXGRP; // other permissions if (perm[7] != '-') mode |= S_IROTH; if (perm[8] != '-') mode |= S_IWOTH; if (perm[9] != '-') mode |= S_IXOTH; #endif return mode; } UDSEntryList* kio_krarcProtocol::addNewDir(const QString& path) { KRFUNC; UDSEntryList* dir; // check if the current dir exists QHash::iterator itef = dirDict.find(path); if (itef != dirDict.end()) return itef.value(); // set dir to the parent dir dir = addNewDir(path.left(path.lastIndexOf(DIR_SEPARATOR, -2) + 1)); // add a new entry in the parent dir QString name = path.mid(path.lastIndexOf(DIR_SEPARATOR, -2) + 1); name = name.left(name.length() - 1); if (name == "." || name == "..") { // entries with these names wouldn't be displayed // don't translate since this is an internal error QString err = QString("Cannot handle path: ") + path; // KRDEBUG("ERROR: " << err); error(KIO::ERR_INTERNAL, err); exit(); } UDSEntry entry; entry.UDS_ENTRY_INSERT(KIO::UDSEntry::UDS_NAME, name); mode_t mode = parsePermString("drwxr-xr-x"); entry.UDS_ENTRY_INSERT(KIO::UDSEntry::UDS_FILE_TYPE, mode & S_IFMT); // keep file type only entry.UDS_ENTRY_INSERT(KIO::UDSEntry::UDS_ACCESS, mode & 07777); // keep permissions only entry.UDS_ENTRY_INSERT(KIO::UDSEntry::UDS_SIZE, 0); entry.UDS_ENTRY_INSERT(KIO::UDSEntry::UDS_MODIFICATION_TIME, arcFile->time(KFileItem::ModificationTime).toTime_t()); dir->append(entry); // create a new directory entry and add it.. dir = new UDSEntryList(); dirDict.insert(path, dir); return dir; } void kio_krarcProtocol::parseLine(int lineNo, QString line) { KRFUNC; UDSEntryList* dir; UDSEntry entry; QString owner; QString group; QString symlinkDest; QString perm; mode_t mode = 0666; size_t size = 0; time_t time = ::time(nullptr); QString fullName; if (arcType == "zip") { // permissions perm = nextWord(line); // ignore the next 2 fields nextWord(line); nextWord(line); // size size = nextWord(line).toLong(); // ignore the next 2 fields nextWord(line);nextWord(line); // date & time QString d = nextWord(line); QDate qdate(d.mid(0, 4).toInt(), d.mid(4, 2).toInt(), d.mid(6, 2).toInt()); QTime qtime(d.mid(9, 2).toInt(), d.mid(11, 2).toInt(), d.mid(13, 2).toInt()); time = QDateTime(qdate, qtime).toTime_t(); // full name fullName = nextWord(line, '\n'); if (perm.length() != 10) perm = (perm.at(0) == 'd' || fullName.endsWith(DIR_SEPARATOR)) ? "drwxr-xr-x" : "-rw-r--r--" ; mode = parsePermString(perm); } if (arcType == "rar") { // permissions perm = nextWord(line); // size size = nextWord(line).toLong(); // ignore the next 2 fields : packed size and compression ration nextWord(line); nextWord(line); // date & time QString d = nextWord(line); int year = 1900 + d.mid(6, 2).toInt(); if (year < 1930) year += 100; QDate qdate(year, d.mid(3, 2).toInt(), d.mid(0, 2).toInt()); QString t = nextWord(line); QTime qtime(t.mid(0, 2).toInt(), t.mid(3, 2).toInt(), 0); time = QDateTime(qdate, qtime).toTime_t(); // checksum : ignored nextWord(line); // full name fullName = nextWord(line, '\n'); if (perm.length() == 7) { // windows rar permission format bool isDir = (perm.at(1).toLower() == 'd'); bool isReadOnly = (perm.at(2).toLower() == 'r'); perm = isDir ? "drwxr-xr-x" : "-rw-r--r--"; if (isReadOnly) perm[ 2 ] = '-'; } if (perm.length() != 10) perm = (perm.at(0) == 'd') ? "drwxr-xr-x" : "-rw-r--r--" ; mode = parsePermString(perm); } if (arcType == "arj") { nextWord(line); // full name fullName = nextWord(line, '\n'); // ignore the next 2 fields nextWord(line); nextWord(line); // size size = nextWord(line).toLong(); // ignore the next 2 fields nextWord(line); nextWord(line); // date & time QString d = nextWord(line); int year = 1900 + d.mid(0, 2).toInt(); if (year < 1930) year += 100; QDate qdate(year, d.mid(3, 2).toInt(), d.mid(6, 2).toInt()); QString t = nextWord(line); QTime qtime(t.mid(0, 2).toInt(), t.mid(3, 2).toInt(), 0); time = QDateTime(qdate, qtime).toTime_t(); // permissions perm = nextWord(line); if (perm.length() != 10) perm = (perm.at(0) == 'd') ? "drwxr-xr-x" : "-rw-r--r--" ; mode = parsePermString(perm); } if (arcType == "rpm") { // full name fullName = nextWord(line); // size size = nextWord(line).toULong(); // date & time time = nextWord(line).toULong(); // next field is md5sum, ignore it nextWord(line); // permissions mode = nextWord(line).toULong(nullptr, 8); // Owner & Group owner = nextWord(line); group = nextWord(line); // symlink destination #ifndef Q_OS_WIN if (S_ISLNK(mode)) { // ignore the next 3 fields nextWord(line); nextWord(line); nextWord(line); symlinkDest = nextWord(line); } #endif } if (arcType == "gzip") { if (!lineNo) return; //ignore the first line // first field is uncompressed size - ignore it nextWord(line); // size size = nextWord(line).toULong(); // ignore the next field nextWord(line); // full name fullName = nextWord(line); fullName = fullName.mid(fullName.lastIndexOf(DIR_SEPARATOR) + 1); } if (arcType == "lzma") { fullName = arcFile->name(); if (fullName.endsWith(QLatin1String("lzma"))) { fullName.truncate(fullName.length() - 5); } mode = arcFile->mode(); size = arcFile->size(); } if (arcType == "xz") { fullName = arcFile->name(); if (fullName.endsWith(QLatin1String("xz"))) { fullName.truncate(fullName.length() - 3); } mode = arcFile->mode(); size = arcFile->size(); } if (arcType == "bzip2") { // There is no way to list bzip2 files, so we take our information from // the archive itself... fullName = arcFile->name(); if (fullName.endsWith(QLatin1String("bz2"))) { fullName.truncate(fullName.length() - 4); } mode = arcFile->mode(); size = arcFile->size(); } if (arcType == "lha") { // permissions perm = nextWord(line); if (perm.length() != 10) perm = (perm.at(0) == 'd') ? "drwxr-xr-x" : "-rw-r--r--" ; mode = parsePermString(perm); // ignore the next field nextWord(line); // size size = nextWord(line).toLong(); // ignore the next field nextWord(line); // date & time int month = (QString("Jan,Feb,Mar,Apr,May,Jun,Jul,Aug,Sep,Oct,Nov,Dec").split(',')).indexOf(nextWord(line)) + 1; int day = nextWord(line).toInt(); int year = QDate::currentDate().year(); QString third = nextWord(line); QTime qtime; if (third.contains(":")) qtime = QTime::fromString(third); else year = third.toInt(); QDate qdate(year, month, day); time = QDateTime(qdate, qtime).toTime_t(); // full name fullName = nextWord(line, '\n'); } if (arcType == "ace") { // date & time QString d = nextWord(line); int year = 1900 + d.mid(6, 2).toInt(); if (year < 1930) year += 100; QDate qdate(year, d.mid(3, 2).toInt(), d.mid(0, 2).toInt()); QString t = nextWord(line); QTime qtime(t.mid(0, 2).toInt(), t.mid(3, 2).toInt(), 0); time = QDateTime(qdate, qtime).toTime_t(); // ignore the next field nextWord(line); // size size = nextWord(line).toLong(); // ignore the next field nextWord(line); // full name fullName = nextWord(line, '\n'); if (fullName[ 0 ] == '*') // encrypted archives starts with '*' fullName = fullName.mid(1); } if (arcType == "deb") { // permissions perm = nextWord(line); mode = parsePermString(perm); // Owner & Group owner = nextWord(line, DIR_SEPARATOR_CHAR); group = nextWord(line).mid(1); // size size = nextWord(line).toLong(); // date & time QString d = nextWord(line); QDate qdate(d.mid(0, 4).toInt(), d.mid(5, 2).toInt(), d.mid(8, 2).toInt()); QString t = nextWord(line); QTime qtime(t.mid(0, 2).toInt(), t.mid(3, 2).toInt(), 0); time = QDateTime(qdate, qtime).toTime_t(); // full name fullName = nextWord(line, '\n').mid(1); //if ( fullName.right( 1 ) == "/" ) return; if (fullName.contains("->")) { symlinkDest = fullName.mid(fullName.indexOf("->") + 2); fullName = fullName.left(fullName.indexOf("->") - 1); } } if (arcType == "7z") { // date & time QString d = nextWord(line); QDate qdate(d.mid(0, 4).toInt(), d.mid(5, 2).toInt(), d.mid(8, 2).toInt()); QString t = nextWord(line); QTime qtime(t.mid(0, 2).toInt(), t.mid(3, 2).toInt(), t.mid(6, 2).toInt()); time = QDateTime(qdate, qtime).toTime_t(); // permissions perm = nextWord(line); bool isDir = (perm.at(0).toLower() == 'd'); bool isReadOnly = (perm.at(1).toLower() == 'r'); perm = isDir ? "drwxr-xr-x" : "-rw-r--r--"; if (isReadOnly) perm[ 2 ] = '-'; mode = parsePermString(perm); // size size = nextWord(line).toLong(); // ignore the next 15 characters line = line.mid(15); // full name fullName = nextWord(line, '\n'); } if (fullName.right(1) == DIR_SEPARATOR) fullName = fullName.left(fullName.length() - 1); if (!fullName.startsWith(DIR_SEPARATOR)) fullName = DIR_SEPARATOR + fullName; QString path = fullName.left(fullName.lastIndexOf(DIR_SEPARATOR) + 1); // set/create the directory UDSEntryList QHash::iterator itef = dirDict.find(path); if (itef == dirDict.end()) dir = addNewDir(path); else dir = itef.value(); QString name = fullName.mid(fullName.lastIndexOf(DIR_SEPARATOR) + 1); // file name entry.UDS_ENTRY_INSERT(KIO::UDSEntry::UDS_NAME, name); // file type entry.UDS_ENTRY_INSERT(KIO::UDSEntry::UDS_FILE_TYPE, mode & S_IFMT); // keep file type only // file permissions entry.UDS_ENTRY_INSERT(KIO::UDSEntry::UDS_ACCESS, mode & 07777); // keep permissions only // file size entry.UDS_ENTRY_INSERT(KIO::UDSEntry::UDS_SIZE, size); // modification time entry.UDS_ENTRY_INSERT(KIO::UDSEntry::UDS_MODIFICATION_TIME, time); // link destination if (!symlinkDest.isEmpty()) { entry.UDS_ENTRY_INSERT(KIO::UDSEntry::UDS_LINK_DEST, symlinkDest); } if (S_ISDIR(mode)) { fullName = fullName + DIR_SEPARATOR; if (dirDict.find(fullName) == dirDict.end()) dirDict.insert(fullName, new UDSEntryList()); else { // try to overwrite an existing entry UDSEntryList::iterator entryIt; for (entryIt = dir->begin(); entryIt != dir->end(); ++entryIt) { if (entryIt->contains(KIO::UDSEntry::UDS_NAME) && entryIt->stringValue(KIO::UDSEntry::UDS_NAME) == name) { entryIt->UDS_ENTRY_INSERT(KIO::UDSEntry::UDS_MODIFICATION_TIME, time); entryIt->UDS_ENTRY_INSERT(KIO::UDSEntry::UDS_ACCESS, mode); return; } } return; // there is already an entry for this directory } } // multi volume archives can add a file twice, use only one UDSEntryList::iterator dirEntryIt; for (dirEntryIt = dir->begin(); dirEntryIt != dir->end(); ++dirEntryIt) if (dirEntryIt->contains(KIO::UDSEntry::UDS_NAME) && dirEntryIt->stringValue(KIO::UDSEntry::UDS_NAME) == name) return; dir->append(entry); } bool kio_krarcProtocol::initArcParameters() { KRFUNC; KRDEBUG("arcType: " << arcType); noencoding = false; cmd.clear(); listCmd = QStringList(); getCmd = QStringList(); copyCmd = QStringList(); delCmd = QStringList(); putCmd = QStringList(); renCmd = QStringList(); if (arcType == "zip") { noencoding = true; cmd = fullPathName("unzip"); listCmd << fullPathName("unzip") << "-ZTs-z-t-h"; getCmd << fullPathName("unzip") << "-p"; copyCmd << fullPathName("unzip") << "-jo"; if (QStandardPaths::findExecutable(QStringLiteral("zip")).isEmpty()) { delCmd = QStringList(); putCmd = QStringList(); } else { delCmd << fullPathName("zip") << "-d"; putCmd << fullPathName("zip") << "-ry"; } if (!QStandardPaths::findExecutable(QStringLiteral("7za")).isEmpty()) { renCmd << fullPathName("7za") << "rn"; } if (!getPassword().isEmpty()) { getCmd << "-P" << password; copyCmd << "-P" << password; putCmd << "-P" << password; } } else if (arcType == "rar") { noencoding = true; if (QStandardPaths::findExecutable(QStringLiteral("rar")).isEmpty()) { cmd = fullPathName("unrar"); listCmd << fullPathName("unrar") << "-c-" << "-v" << "v"; getCmd << fullPathName("unrar") << "p" << "-ierr" << "-idp" << "-c-" << "-y"; copyCmd << fullPathName("unrar") << "e" << "-y"; delCmd = QStringList(); putCmd = QStringList(); } else { cmd = fullPathName("rar"); listCmd << fullPathName("rar") << "-c-" << "-v" << "v"; getCmd << fullPathName("rar") << "p" << "-ierr" << "-idp" << "-c-" << "-y"; copyCmd << fullPathName("rar") << "e" << "-y"; delCmd << fullPathName("rar") << "d"; putCmd << fullPathName("rar") << "-r" << "a"; } if (!getPassword().isEmpty()) { getCmd << QString("-p%1").arg(password); listCmd << QString("-p%1").arg(password); copyCmd << QString("-p%1").arg(password); if (!putCmd.isEmpty()) { putCmd << QString("-p%1").arg(password); delCmd << QString("-p%1").arg(password); } } } else if (arcType == "rpm") { cmd = fullPathName("rpm"); listCmd << fullPathName("rpm") << "--dump" << "-lpq"; getCmd << fullPathName("cpio") << "--force-local" << "--no-absolute-filenames" << "-iuvdF"; delCmd = QStringList(); putCmd = QStringList(); copyCmd = QStringList(); } else if (arcType == "gzip") { cmd = fullPathName("gzip"); listCmd << fullPathName("gzip") << "-l"; getCmd << fullPathName("gzip") << "-dc"; copyCmd = QStringList(); delCmd = QStringList(); putCmd = QStringList(); } else if (arcType == "bzip2") { cmd = fullPathName("bzip2"); listCmd << fullPathName("bzip2"); getCmd << fullPathName("bzip2") << "-dc"; copyCmd = QStringList(); delCmd = QStringList(); putCmd = QStringList(); } else if (arcType == "lzma") { cmd = fullPathName("lzma"); listCmd << fullPathName("lzma"); getCmd << fullPathName("lzma") << "-dc"; copyCmd = QStringList(); delCmd = QStringList(); putCmd = QStringList(); } else if (arcType == "xz") { cmd = fullPathName("xz"); listCmd << fullPathName("xz"); getCmd << fullPathName("xz") << "-dc"; copyCmd = QStringList(); delCmd = QStringList(); putCmd = QStringList(); } else if (arcType == "arj") { cmd = fullPathName("arj"); listCmd << fullPathName("arj") << "v" << "-y" << "-v"; getCmd << fullPathName("arj") << "-jyov" << "-v" << "e"; copyCmd << fullPathName("arj") << "-jyov" << "-v" << "e"; delCmd << fullPathName("arj") << "d"; putCmd << fullPathName("arj") << "-r" << "a"; if (!getPassword().isEmpty()) { getCmd << QString("-g%1").arg(password); copyCmd << QString("-g%1").arg(password); putCmd << QString("-g%1").arg(password); } } else if (arcType == "lha") { cmd = fullPathName("lha"); listCmd << fullPathName("lha") << "l"; getCmd << fullPathName("lha") << "pq"; copyCmd << fullPathName("lha") << "eif"; delCmd << fullPathName("lha") << "d"; putCmd << fullPathName("lha") << "a"; } else if (arcType == "ace") { cmd = fullPathName("unace"); listCmd << fullPathName("unace") << "v"; getCmd << fullPathName("unace") << "e" << "-o"; copyCmd << fullPathName("unace") << "e" << "-o"; delCmd = QStringList(); putCmd = QStringList(); if (!getPassword().isEmpty()) { getCmd << QString("-p%1").arg(password); copyCmd << QString("-p%1").arg(password); } } else if (arcType == "deb") { cmd = fullPathName("dpkg"); listCmd << fullPathName("dpkg") << "-c"; getCmd << fullPathName("tar") << "xvf"; copyCmd = QStringList(); delCmd = QStringList(); putCmd = QStringList(); } else if (arcType == "7z") { noencoding = true; cmd = fullPathName("7z"); if (QStandardPaths::findExecutable(cmd).isEmpty()) cmd = fullPathName("7za"); listCmd << cmd << "l" << "-y"; getCmd << cmd << "e" << "-y"; copyCmd << cmd << "e" << "-y"; delCmd << cmd << "d" << "-y"; putCmd << cmd << "a" << "-y"; renCmd << cmd << "rn"; if (!getPassword().isEmpty()) { getCmd << QString("-p%1").arg(password); listCmd << QString("-p%1").arg(password); copyCmd << QString("-p%1").arg(password); if (!putCmd.isEmpty()) { putCmd << QString("-p%1").arg(password); delCmd << QString("-p%1").arg(password); } } } // checking if it's an absolute path #ifdef Q_OS_WIN if (cmd.length() > 2 && cmd[ 0 ].isLetter() && cmd[ 1 ] == ':') return true; #else if (cmd.startsWith(DIR_SEPARATOR)) return true; #endif if (QStandardPaths::findExecutable(cmd).isEmpty()) { error(KIO::ERR_CANNOT_LAUNCH_PROCESS, cmd + i18n("\nMake sure that the %1 binary is installed properly on your system.", cmd)); KRDEBUG("Failed to find cmd: " << cmd); return false; } return true; } bool kio_krarcProtocol::checkStatus(int exitCode) { KRFUNC; KRDEBUG(exitCode); return KrArcBaseManager::checkStatus(arcType, exitCode); } void kio_krarcProtocol::checkIf7zIsEncrypted(bool &encrypted, QString fileName) { KRFUNC; if (encryptedArchPath == fileName) encrypted = true; else { // we try to find whether the 7z archive is encrypted // this is hard as the headers are also compressed QString tester = fullPathName("7z"); if (QStandardPaths::findExecutable(tester).isEmpty()) { KRDEBUG("A 7z program was not found"); tester = fullPathName("7za"); if (QStandardPaths::findExecutable(tester).isEmpty()) { KRDEBUG("A 7za program was not found"); return; } } QString testCmd = tester + " t -y "; lastData = encryptedArchPath = ""; KrLinecountingProcess proc; proc << testCmd << fileName; connect(&proc, &KrLinecountingProcess::newOutputData, this, &kio_krarcProtocol::checkOutputForPassword); proc.start(); proc.waitForFinished(); encrypted = this->encrypted; if (encrypted) encryptedArchPath = fileName; } } void kio_krarcProtocol::checkOutputForPassword(KProcess * proc, QByteArray & buf) { KRFUNC; QString data = QString(buf); QString checkable = lastData + data; QStringList lines = checkable.split('\n'); lastData = lines[ lines.count() - 1 ]; for (int i = 0; i != lines.count(); i++) { QString line = lines[ i ].trimmed().toLower(); int ndx = line.indexOf("testing"); if (ndx >= 0) line.truncate(ndx); if (line.isEmpty()) continue; if (line.contains("password") && line.contains("enter")) { KRDEBUG("Encrypted 7z archive found!"); encrypted = true; proc->kill(); return; } } } void kio_krarcProtocol::invalidatePassword() { KRFUNC; KRDEBUG(getPath(arcFile->url(), QUrl::StripTrailingSlash) + DIR_SEPARATOR); if (!encrypted) return; KIO::AuthInfo authInfo; authInfo.caption = i18n("Krarc Password Dialog"); authInfo.username = "archive"; authInfo.readOnly = true; authInfo.keepPassword = true; authInfo.verifyPath = true; QString fileName = getPath(arcFile->url(), QUrl::StripTrailingSlash); authInfo.url = QUrl::fromLocalFile(ROOT_DIR); authInfo.url.setHost(fileName /*.replace('/','_')*/); authInfo.url.setScheme("krarc"); password.clear(); cacheAuthentication(authInfo); } QString kio_krarcProtocol::getPassword() { KRFUNC; KRDEBUG("Encrypted: " << encrypted); if (!password.isNull()) return password; if (!encrypted) return (password = ""); KIO::AuthInfo authInfo; authInfo.caption = i18n("Krarc Password Dialog"); authInfo.username = "archive"; authInfo.readOnly = true; authInfo.keepPassword = true; authInfo.verifyPath = true; QString fileName = getPath(arcFile->url(), QUrl::StripTrailingSlash); authInfo.url = QUrl::fromLocalFile(ROOT_DIR); authInfo.url.setHost(fileName /*.replace('/','_')*/); authInfo.url.setScheme("krarc"); if (checkCachedAuthentication(authInfo) && !authInfo.password.isNull()) { KRDEBUG(authInfo.password); return (password = authInfo.password); } authInfo.password.clear(); #if KIO_VERSION_MINOR >= 24 int errCode = openPasswordDialogV2(authInfo, i18n("Accessing the file requires a password.")); if (!errCode && !authInfo.password.isNull()) { #else if (openPasswordDialog(authInfo, i18n("Accessing the file requires a password.")) && !authInfo.password.isNull()) { #endif KRDEBUG(authInfo.password); return (password = authInfo.password); #if KIO_VERSION_MINOR >= 24 } else { error(errCode, QString()); #endif } KRDEBUG(password); return password; } QString kio_krarcProtocol::detectFullPathName(QString name) { // Note: KRFUNC was not used here in order to avoid filling the log with too much information KRDEBUG(name); name = name + EXEC_SUFFIX; QStringList path = QString::fromLocal8Bit(qgetenv("PATH")).split(':'); for (auto & it : path) { if (QDir(it).exists(name)) { QString dir = it; if (!dir.endsWith(DIR_SEPARATOR)) dir += DIR_SEPARATOR; return dir + name; } } return name; } QString kio_krarcProtocol::fullPathName(const QString& name) { // Note: KRFUNC was not used here in order to avoid filling the log with too much information KRDEBUG(name); QString supposedName = confGrp.readEntry(name, QString()); if (supposedName.isEmpty()) supposedName = detectFullPathName(name); return supposedName; } QString kio_krarcProtocol::localeEncodedString(QString str) { // Note: KRFUNC was not used here in order to avoid filling the log with too much information if (noencoding) return str; QByteArray array = codec->fromUnicode(str); // encoding the byte array to QString, mapping 0x0000-0x00FF to 0xE000-0xE0FF // see KrArcCodec for more explanation int size = array.size(); QString result; const char *data = array.data(); for (int i = 0; i != size; i++) { unsigned short ch = (((int)data[ i ]) & 0xFF) + 0xE000; // user defined character result.append(QChar(ch)); } return result; } QByteArray kio_krarcProtocol::encodeString(const QString& str) { // Note: KRFUNC was not used here in order to avoid filling the log with too much information if (noencoding) return QTextCodec::codecForLocale()->fromUnicode(str); return codec->fromUnicode(str); } QString kio_krarcProtocol::decodeString(char * buf) { // Note: KRFUNC was not used here in order to avoid filling the log with too much information if (noencoding) return QTextCodec::codecForLocale()->toUnicode(buf); return codec->toUnicode(buf); } QString kio_krarcProtocol::getPath(const QUrl &url, QUrl::FormattingOptions options) { // Note: KRFUNC was not used here in order to avoid filling the log with too much information QString path = url.adjusted(options).path(); REPLACE_DIR_SEP2(path); #ifdef Q_OS_WIN if (path.startsWith(DIR_SEPARATOR)) { int p = 1; while (p < path.length() && path[ p ] == DIR_SEPARATOR_CHAR) p++; /* /C:/Folder */ if (p + 2 <= path.length() && path[ p ].isLetter() && path[ p + 1 ] == ':') { path = path.mid(p); } } #endif return path; } #endif // KRARC_ENABLED