diff --git a/kcmkwin/kwinoptions/windows.cpp b/kcmkwin/kwinoptions/windows.cpp
index ca757119c..fa41f0dac 100644
--- a/kcmkwin/kwinoptions/windows.cpp
+++ b/kcmkwin/kwinoptions/windows.cpp
@@ -1,1091 +1,1095 @@
 /*
  * windows.cpp
  *
  * Copyright (c) 1997 Patrick Dowler dowler@morgul.fsh.uvic.ca
  * Copyright (c) 2001 Waldo Bastian bastian@kde.org
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
  *  the Free Software Foundation; either version 2 of the License, or
  *  (at your option) any later version.
  *
  *  This program is distributed in the hope that it will be useful,
  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *  GNU General Public License for more details.
  *
  *  You should have received a copy of the GNU General Public License
  *  along with this program; if not, write to the Free Software
  *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
  *
  */
 
 #include <config.h>
 
 #include <qlayout.h>
 #include <qslider.h>
 #include <qwhatsthis.h>
 #include <qvbuttongroup.h>
 #include <qcheckbox.h>
 #include <qradiobutton.h>
 #include <qlabel.h>
 #include <qcombobox.h>
 
 #include <klocale.h>
 #include <kconfig.h>
 #include <knuminput.h>
 #include <kapplication.h>
 #include <kdialog.h>
 #include <dcopclient.h>
 #include <kglobal.h>
 
 #include <X11/X.h>
 #include <X11/Xlib.h>
 #include <X11/Xutil.h>
 
 #include "windows.h"
 
 
 // kwin config keywords
 #define KWIN_FOCUS                 "FocusPolicy"
 #define KWIN_PLACEMENT             "Placement"
 #define KWIN_MOVE                  "MoveMode"
 #define KWIN_MINIMIZE_ANIM         "AnimateMinimize"
 #define KWIN_MINIMIZE_ANIM_SPEED   "AnimateMinimizeSpeed"
 #define KWIN_RESIZE_OPAQUE         "ResizeMode"
 #define KWIN_GEOMETRY		   "GeometryTip"
 #define KWIN_AUTORAISE_INTERVAL    "AutoRaiseInterval"
 #define KWIN_AUTORAISE             "AutoRaise"
 #define KWIN_CLICKRAISE            "ClickRaise"
 #define KWIN_ANIMSHADE             "AnimateShade"
 #define KWIN_MOVE_RESIZE_MAXIMIZED "MoveResizeMaximizedWindows"
 #define KWIN_ALTTABMODE            "AltTabStyle"
 #define KWIN_TRAVERSE_ALL          "TraverseAll"
 #define KWIN_SHOW_POPUP            "ShowPopup"
 #define KWIN_ROLL_OVER_DESKTOPS    "RollOverDesktops"
 #define KWIN_SHADEHOVER            "ShadeHover"
 #define KWIN_SHADEHOVER_INTERVAL   "ShadeHoverInterval"
 #define KWIN_FOCUS_STEALING        "FocusStealingPreventionLevel"
 
 // kwm config keywords
 #define KWM_ELECTRIC_BORDER                  "ElectricBorders"
 #define KWM_ELECTRIC_BORDER_DELAY            "ElectricBorderDelay"
 
 //CT 15mar 98 - magics
 #define KWM_BRDR_SNAP_ZONE                   "BorderSnapZone"
 #define KWM_BRDR_SNAP_ZONE_DEFAULT           10
 #define KWM_WNDW_SNAP_ZONE                   "WindowSnapZone"
 #define KWM_WNDW_SNAP_ZONE_DEFAULT           10
 
 #define MAX_BRDR_SNAP                          100
 #define MAX_WNDW_SNAP                          100
 #define MAX_EDGE_RES                          1000
 
 
 KFocusConfig::~KFocusConfig ()
 {
     if (standAlone)
         delete config;
 }
 
 // removed the LCD display over the slider - this is not good GUI design :) RNolden 051701
 KFocusConfig::KFocusConfig (bool _standAlone, KConfig *_config, QWidget * parent, const char *)
     : KCModule(parent, "kcmkwm"), config(_config), standAlone(_standAlone)
 {
     QString wtstr;
     QBoxLayout *lay = new QVBoxLayout (this, 0, KDialog::spacingHint());
 
     //iTLabel = new QLabel(i18n("  Allowed overlap:\n"
     //                         "(% of desktop space)"),
     //             plcBox);
     //iTLabel->setAlignment(AlignTop|AlignHCenter);
     //pLay->addWidget(iTLabel,1,1);
 
     //interactiveTrigger = new QSpinBox(0, 500, 1, plcBox);
     //pLay->addWidget(interactiveTrigger,1,2);
 
     //pLay->addRowSpacing(2,KDialog::spacingHint());
 
     //lay->addWidget(plcBox);
 
     // focus policy
     fcsBox = new QButtonGroup(i18n("Focus"),this);
     fcsBox->setColumnLayout( 0, Qt::Horizontal );
 
     QBoxLayout *fLay = new QVBoxLayout(fcsBox->layout(),
         KDialog::spacingHint());
 
     QBoxLayout *cLay = new QHBoxLayout(fLay);
     QLabel *fLabel = new QLabel(i18n("&Policy:"), fcsBox);
     cLay->addWidget(fLabel, 0);
     focusCombo =  new QComboBox(false, fcsBox);
     focusCombo->insertItem(i18n("Click to Focus"), CLICK_TO_FOCUS);
     focusCombo->insertItem(i18n("Focus Follows Mouse"), FOCUS_FOLLOWS_MOUSE);
     focusCombo->insertItem(i18n("Focus Under Mouse"), FOCUS_UNDER_MOUSE);
     focusCombo->insertItem(i18n("Focus Strictly Under Mouse"), FOCUS_STRICTLY_UNDER_MOUSE);
     cLay->addWidget(focusCombo,1 ,Qt::AlignLeft);
     fLabel->setBuddy(focusCombo);
 
     // FIXME, when more policies have been added to KWin
     wtstr = i18n("The focus policy is used to determine the active window, i.e."
                                       " the window you can work in. <ul>"
                                       " <li><em>Click to focus:</em> A window becomes active when you click into it. This is the behavior"
                                       " you might know from other operating systems.</li>"
                                       " <li><em>Focus follows mouse:</em> Moving the mouse pointer actively on to a"
                                       " normal window activates it. Very practical if you are using the mouse a lot.</li>"
                                       " <li><em>Focus under mouse:</em> The window that happens to be under the"
                                       " mouse pointer becomes active. If the mouse points nowhere, the last window"
                                       " that was under the mouse has focus. </li>"
                                       " <li><em>Focus strictly under mouse:</em> This is even worse than"
                                       " 'Focus under mouse'. Only the window under the mouse pointer is"
                                       " active. If the mouse points nowhere, nothing has focus."
                                       " </ul>"
                                       " Note that 'Focus under mouse' and 'Focus strictly under mouse' are not"
                                       " particularly useful. They are only provided for old-fashioned"
                                       " die-hard UNIX people ;-)"
                          );
     QWhatsThis::add( focusCombo, wtstr);
     QWhatsThis::add(fLabel, wtstr);
 
     connect(focusCombo, SIGNAL(activated(int)), this, SLOT(setAutoRaiseEnabled()) );
 
     // autoraise delay
     autoRaiseOn = new QCheckBox(i18n("Auto &raise"), fcsBox);
     fLay->addWidget(autoRaiseOn);
     connect(autoRaiseOn,SIGNAL(toggled(bool)), this, SLOT(autoRaiseOnTog(bool)));
 
     autoRaise = new KIntNumInput(500, fcsBox);
     autoRaise->setLabel(i18n("Dela&y:"), Qt::AlignVCenter|Qt::AlignLeft);
     autoRaise->setRange(0, 3000, 100, true);
     autoRaise->setSteps(100,100);
     autoRaise->setSuffix(i18n(" msec"));
     fLay->addWidget(autoRaise);
 
     clickRaiseOn = new QCheckBox(i18n("C&lick raise active window"), fcsBox);
     connect(clickRaiseOn,SIGNAL(toggled(bool)), this, SLOT(clickRaiseOnTog(bool)));
     fLay->addWidget(clickRaiseOn);
 
 //     fLay->addColSpacing(0,QMAX(autoRaiseOn->sizeHint().width(),
 //                                clickRaiseOn->sizeHint().width()) + 15);
 
     QWhatsThis::add( autoRaiseOn, i18n("When this option is enabled, a window in the background will automatically"
                                        " come to the front when the mouse pointer has been over it for some time.") );
     wtstr = i18n("This is the delay after which the window that the mouse pointer is over will automatically"
                  " come to the front.");
     QWhatsThis::add( autoRaise, wtstr );
 
     QWhatsThis::add( clickRaiseOn, i18n("When this option is enabled, the active window will be brought to the"
                                         " front when you click somewhere into the window contents. To change"
                                         " it for inactive windows, you need to change the settings"
                                         " in the Actions tab.") );
 
     lay->addWidget(fcsBox);
 
     kbdBox = new QButtonGroup(i18n("Navigation"), this);
     kbdBox->setColumnLayout( 0, Qt::Horizontal );
     QGridLayout *kLay = new QGridLayout(kbdBox->layout(), 4, 4,
                                         KDialog::spacingHint());
     QLabel *altTabLabel = new QLabel( i18n("Walk through windows mode:"), kbdBox);
     kLay->addWidget(altTabLabel, 1, 0);
     kdeMode = new QRadioButton(i18n("&KDE"), kbdBox);
     kLay->addWidget(kdeMode, 1, 1);
     cdeMode = new QRadioButton(i18n("CD&E"), kbdBox);
     kLay->addWidget(cdeMode, 1, 2);
 
     wtstr = i18n("Hold down the Alt key and press the Tab key repeatedly to walk"
                  " through the windows on the current desktop (the Alt+Tab"
                  " combination can be reconfigured). The two different modes mean:<ul>"
                  "<li><b>KDE</b>: a nice widget is shown, displaying the icons of all windows to"
                  " walk through and the title of the currently selected one;"
                  "<li><b>CDE</b>: the focus is passed to a new window each time Tab is pressed."
                  " No fancy widget.</li></ul>");
     QWhatsThis::add( altTabLabel, wtstr );
     QWhatsThis::add( kdeMode, wtstr );
     QWhatsThis::add( cdeMode, wtstr );
 
     traverseAll = new QCheckBox( i18n( "&Traverse windows on all desktops" ), kbdBox );
     kLay->addMultiCellWidget( traverseAll, 2, 2, 0, 2 );
 
     wtstr = i18n( "Leave this option disabled if you want to limit walking through"
                   " windows to the current desktop." );
     QWhatsThis::add( traverseAll, wtstr );
 
     rollOverDesktops = new QCheckBox( i18n("Desktop navi&gation wraps around"), kbdBox );
     kLay->addMultiCellWidget(rollOverDesktops, 3, 3, 0, 2);
 
     wtstr = i18n( "Enable this option if you want keyboard or active desktop border navigation beyond"
                   " the edge of a desktop to take you to the opposite edge of the new desktop." );
     QWhatsThis::add( rollOverDesktops, wtstr );
 
     showPopupinfo = new QCheckBox( i18n("Popup desktop name on desktop &switch"), kbdBox );
     kLay->addMultiCellWidget(showPopupinfo, 4, 4, 0, 2);
 
     wtstr = i18n( "Enable this option if you wish to see the current desktop"
                   " name popup whenever the current desktop is changed." );
     QWhatsThis::add( showPopupinfo, wtstr );
 
     lay->addWidget(kbdBox);
 
     lay->addStretch();
 
     // Any changes goes to slotChanged()
     connect(focusCombo, SIGNAL(activated(int)), SLOT(changed()));
     connect(fcsBox, SIGNAL(clicked(int)), SLOT(changed()));
     connect(autoRaise, SIGNAL(valueChanged(int)), SLOT(changed()));
     connect(kdeMode, SIGNAL(clicked()), SLOT(changed()));
     connect(cdeMode, SIGNAL(clicked()), SLOT(changed()));
     connect(traverseAll, SIGNAL(clicked()), SLOT(changed()));
     connect(rollOverDesktops, SIGNAL(clicked()), SLOT(changed()));
     connect(showPopupinfo, SIGNAL(clicked()), SLOT(changed()));
 
     load();
 }
 
 
 int KFocusConfig::getFocus()
 {
     return focusCombo->currentItem();
 }
 
 void KFocusConfig::setFocus(int foc)
 {
     focusCombo->setCurrentItem(foc);
 
     // this will disable/hide the auto raise delay widget if focus==click
     setAutoRaiseEnabled();
 }
 
 void KFocusConfig::setAutoRaiseInterval(int tb)
 {
     autoRaise->setValue(tb);
 }
 
 int KFocusConfig::getAutoRaiseInterval()
 {
     return autoRaise->value();
 }
 
 void KFocusConfig::setAutoRaise(bool on)
 {
     autoRaiseOn->setChecked(on);
 }
 
 void KFocusConfig::setClickRaise(bool on)
 {
     clickRaiseOn->setChecked(on);
 }
 
 void KFocusConfig::setAutoRaiseEnabled()
 {
     // the auto raise related widgets are: autoRaise
     if ( focusCombo->currentItem() != CLICK_TO_FOCUS )
     {
         autoRaiseOn->setEnabled(true);
         autoRaiseOnTog(autoRaiseOn->isChecked());
     }
     else
     {
         autoRaiseOn->setEnabled(false);
         autoRaiseOnTog(false);
     }
 }
 
 
 void KFocusConfig::autoRaiseOnTog(bool a) {
     autoRaise->setEnabled(a);
     clickRaiseOn->setEnabled( !a );
     if ( a )
     {
         clickRaiseOn->setChecked( TRUE );
         if(getAutoRaiseInterval() == 0)
             setAutoRaiseInterval(750);
     }
 
 }
 
 void KFocusConfig::clickRaiseOnTog(bool ) {
 }
 
 void KFocusConfig::setAltTabMode(bool a) {
     kdeMode->setChecked(a);
     cdeMode->setChecked(!a);
 }
 
 void KFocusConfig::setTraverseAll(bool a) {
     traverseAll->setChecked(a);
 }
 
 void KFocusConfig::setRollOverDesktops(bool a) {
     rollOverDesktops->setChecked(a);
 }
 
 void KFocusConfig::setShowPopupinfo(bool a) {
     showPopupinfo->setChecked(a);
 }
 
 void KFocusConfig::load( void )
 {
     QString key;
 
     config->setGroup( "Windows" );
 
     key = config->readEntry(KWIN_FOCUS);
     if( key == "ClickToFocus")
         setFocus(CLICK_TO_FOCUS);
     else if( key == "FocusFollowsMouse")
         setFocus(FOCUS_FOLLOWS_MOUSE);
     else if(key == "FocusUnderMouse")
         setFocus(FOCUS_UNDER_MOUSE);
     else if(key == "FocusStrictlyUnderMouse")
         setFocus(FOCUS_STRICTLY_UNDER_MOUSE);
 
     int k = config->readNumEntry(KWIN_AUTORAISE_INTERVAL,0);
     setAutoRaiseInterval(k);
 
     key = config->readEntry(KWIN_AUTORAISE);
     setAutoRaise(key == "on");
     key = config->readEntry(KWIN_CLICKRAISE);
     setClickRaise(key != "off");
     setAutoRaiseEnabled();      // this will disable/hide the auto raise delay widget if focus==click
 
     key = config->readEntry(KWIN_ALTTABMODE, "KDE");
     setAltTabMode(key == "KDE");
 
     setRollOverDesktops( config->readBoolEntry(KWIN_ROLL_OVER_DESKTOPS, true ));
 
     config->setGroup( "PopupInfo" );
     setShowPopupinfo( config->readBoolEntry(KWIN_SHOW_POPUP, false ));
 
     config->setGroup( "TabBox" );
     setTraverseAll( config->readBoolEntry(KWIN_TRAVERSE_ALL, false ));
 
     config->setGroup("Desktops");
     emit KCModule::changed(false);
 }
 
 void KFocusConfig::save( void )
 {
     int v;
 
     config->setGroup( "Windows" );
 
     v = getFocus();
     if (v == CLICK_TO_FOCUS)
         config->writeEntry(KWIN_FOCUS,"ClickToFocus");
     else if (v == FOCUS_UNDER_MOUSE)
         config->writeEntry(KWIN_FOCUS,"FocusUnderMouse");
     else if (v == FOCUS_STRICTLY_UNDER_MOUSE)
         config->writeEntry(KWIN_FOCUS,"FocusStrictlyUnderMouse");
     else
         config->writeEntry(KWIN_FOCUS,"FocusFollowsMouse");
 
     v = getAutoRaiseInterval();
     if (v <0) v = 0;
     config->writeEntry(KWIN_AUTORAISE_INTERVAL,v);
 
     if (autoRaiseOn->isChecked())
         config->writeEntry(KWIN_AUTORAISE, "on");
     else
         config->writeEntry(KWIN_AUTORAISE, "off");
 
     if (clickRaiseOn->isChecked())
         config->writeEntry(KWIN_CLICKRAISE, "on");
     else
         config->writeEntry(KWIN_CLICKRAISE, "off");
 
     if (kdeMode->isChecked())
         config->writeEntry(KWIN_ALTTABMODE, "KDE");
     else
         config->writeEntry(KWIN_ALTTABMODE, "CDE");
 
     config->writeEntry( KWIN_ROLL_OVER_DESKTOPS, rollOverDesktops->isChecked());
 
     config->setGroup( "PopupInfo" );
     config->writeEntry( KWIN_SHOW_POPUP, showPopupinfo->isChecked());
 
     config->setGroup( "TabBox" );
     config->writeEntry( KWIN_TRAVERSE_ALL , traverseAll->isChecked());
 
     config->setGroup("Desktops");
 
     if (standAlone)
     {
         config->sync();
         if ( !kapp->dcopClient()->isAttached() )
             kapp->dcopClient()->attach();
         kapp->dcopClient()->send("kwin*", "", "reconfigure()", "");
     }
     emit KCModule::changed(false);
 }
 
 void KFocusConfig::defaults()
 {
     setAutoRaiseInterval(0);
     setFocus(CLICK_TO_FOCUS);
     setAutoRaise(false);
     setClickRaise(true);
     setAltTabMode(true);
     setTraverseAll( false );
     setRollOverDesktops(true);
     setShowPopupinfo(false);
     emit KCModule::changed(true);
 }
 
 KAdvancedConfig::~KAdvancedConfig ()
 {
     if (standAlone)
         delete config;
 }
 
 KAdvancedConfig::KAdvancedConfig (bool _standAlone, KConfig *_config, QWidget *parent, const char *)
     : KCModule(parent, "kcmkwm"), config(_config), standAlone(_standAlone)
 {
     QString wtstr;
     QBoxLayout *lay = new QVBoxLayout (this, 0, KDialog::spacingHint());
 
     //iTLabel = new QLabel(i18n("  Allowed overlap:\n"
     //                         "(% of desktop space)"),
     //             plcBox);
     //iTLabel->setAlignment(AlignTop|AlignHCenter);
     //pLay->addWidget(iTLabel,1,1);
 
     //interactiveTrigger = new QSpinBox(0, 500, 1, plcBox);
     //pLay->addWidget(interactiveTrigger,1,2);
 
     //pLay->addRowSpacing(2,KDialog::spacingHint());
 
     //lay->addWidget(plcBox);
 
     shBox = new QVButtonGroup(i18n("Shading"), this);
 
     animateShade = new QCheckBox(i18n("Anima&te"), shBox);
     QWhatsThis::add(animateShade, i18n("Animate the action of reducing the window to its titlebar (shading)"
                                        " as well as the expansion of a shaded window") );
 
     shadeHoverOn = new QCheckBox(i18n("&Enable hover"), shBox);
 
     connect(shadeHoverOn, SIGNAL(toggled(bool)), this, SLOT(shadeHoverChanged(bool)));
 
     shadeHover = new KIntNumInput(500, shBox);
     shadeHover->setLabel(i18n("Dela&y:"), Qt::AlignVCenter|Qt::AlignLeft);
     shadeHover->setRange(0, 3000, 100, true);
     shadeHover->setSteps(100, 100);
     shadeHover->setSuffix(i18n(" msec"));
 
     QWhatsThis::add(shadeHoverOn, i18n("If Shade Hover is enabled, a shaded window will un-shade automatically "
                                        "when the mouse pointer has been over the title bar for some time."));
 
     wtstr = i18n("Sets the time in milliseconds before the window unshades "
                 "when the mouse pointer goes over the shaded window.");
     QWhatsThis::add(shadeHover, wtstr);
 
     lay->addWidget(shBox);
 
     // Any changes goes to slotChanged()
     connect(animateShade, SIGNAL(toggled(bool)), SLOT(changed()));
     connect(shadeHoverOn, SIGNAL(toggled(bool)), SLOT(changed()));
     connect(shadeHover, SIGNAL(valueChanged(int)), SLOT(changed()));
 
     electricBox = new QVButtonGroup(i18n("Active Desktop Borders"), this);
     electricBox->setMargin(15);
 
     QWhatsThis::add( electricBox, i18n("If this option is enabled, moving the mouse to a screen border"
        " will change your desktop. This is e.g. useful if you want to drag windows from one desktop"
        " to the other.") );
     active_disable = new QRadioButton(i18n("D&isabled"), electricBox);
     active_move    = new QRadioButton(i18n("Only &when moving windows"), electricBox);
     active_always  = new QRadioButton(i18n("A&lways enabled"), electricBox);
 
     delays = new KIntNumInput(10, electricBox);
     delays->setRange(0, MAX_EDGE_RES, 50, true);
     delays->setSuffix(i18n(" msec"));
     delays->setLabel(i18n("Desktop &switch delay:"));
     QWhatsThis::add( delays, i18n("Here you can set a delay for switching desktops using the active"
        " borders feature. Desktops will be switched after the mouse has been pushed against a screen border"
        " for the specified number of milliseconds.") );
 
     connect( electricBox, SIGNAL(clicked(int)), this, SLOT(setEBorders()));
 
     // Any changes goes to slotChanged()
     connect(electricBox, SIGNAL(clicked(int)), SLOT(changed()));
     connect(delays, SIGNAL(valueChanged(int)), SLOT(changed()));
 
     lay->addWidget(electricBox);
 
     QHBoxLayout* focusStealingLayout = new QHBoxLayout( this, KDialog::marginHint(), KDialog::spacingHint());
     QLabel* focusStealingLabel = new QLabel( i18n( "Focus stealing prevention level:" ), this );
     focusStealing = new QComboBox( this );
     focusStealing->insertItem( i18n( "Focus Stealing Prevention Level", "None" ));
     focusStealing->insertItem( i18n( "Focus Stealing Prevention Level", "Low" ));
     focusStealing->insertItem( i18n( "Focus Stealing Prevention Level", "Normal" ));
     focusStealing->insertItem( i18n( "Focus Stealing Prevention Level", "High" ));
     focusStealing->insertItem( i18n( "Focus Stealing Prevention Level", "Extreme" ));
     focusStealingLabel->setBuddy( focusStealing );
     focusStealingLayout->addWidget( focusStealingLabel );
     focusStealingLayout->addWidget( focusStealing, AlignLeft );
     wtstr = i18n( "This option specifies how much KWin will try to prevent unwanted focus stealing "
                   "caused by unexpected activation of new windows.<ul>"
                   "<li><em>None:</em> The standard old behavior - prevention is turned off "
                   "and new windows always become activated.</li>"
                   "<li><em>Low:</em> Prevention is enabled; when some window doesn't have support "
                   "for the underlying mechanism and KWin cannot reliably decide whether to "
                   "activate the window or not, it will be activated. This setting may have both "
                   "worse and better results than normal level, depending on the applications.</li>"
                   "<li><em>Normal:</em> Prevention is enabled; the default setting.</li>"
                   "<li><em>High:</em> New windows get activated only if no window is currently active "
                   "or if they belong to the currently active application. This setting is probably "
                   "not really usable when not using mouse focus policy.</li>"
                   "<li><em>Extreme:</em> All windows must be explicitly activated by the user.</li>"
                   "</ul>" );
     QWhatsThis::add( focusStealing, wtstr );
     QWhatsThis::add( focusStealingLabel, wtstr );
 
     connect(focusStealing, SIGNAL(activated(int)), SLOT(changed()));
 
     lay->addLayout( focusStealingLayout );
 
     lay->addStretch();
     load();
 
 }
 
 void KAdvancedConfig::setShadeHover(bool on) {
     shadeHoverOn->setChecked(on);
     shadeHover->setEnabled(on);
 }
 
 void KAdvancedConfig::setShadeHoverInterval(int k) {
     shadeHover->setValue(k);
 }
 
 int KAdvancedConfig::getShadeHoverInterval() {
 
     return shadeHover->value();
 }
 
 void KAdvancedConfig::shadeHoverChanged(bool a) {
     shadeHover->setEnabled(a);
 }
 
 void KAdvancedConfig::setAnimateShade(bool a) {
     animateShade->setChecked(a);
 }
 
 void KAdvancedConfig::setFocusStealing(int l) {
     l = KMAX( 0, KMIN( 4, l ));
     focusStealing->setCurrentItem(l);
 }
 
 void KAdvancedConfig::load( void )
 {
     config->setGroup( "Windows" );
 
     setAnimateShade(config->readBoolEntry(KWIN_ANIMSHADE, true));
     setShadeHover(config->readBoolEntry(KWIN_SHADEHOVER, false));
     setShadeHoverInterval(config->readNumEntry(KWIN_SHADEHOVER_INTERVAL, 250));
 
     setElectricBorders(config->readNumEntry(KWM_ELECTRIC_BORDER, false));
     setElectricBorderDelay(config->readNumEntry(KWM_ELECTRIC_BORDER_DELAY, 150));
 
-    setFocusStealing( config->readNumEntry(KWIN_FOCUS_STEALING, 2 ));
+//    setFocusStealing( config->readNumEntry(KWIN_FOCUS_STEALING, 2 ));
+    // TODO default to low for now
+    setFocusStealing( config->readNumEntry(KWIN_FOCUS_STEALING, 1 ));
 
     emit KCModule::changed(false);
 }
 
 void KAdvancedConfig::save( void )
 {
     int v;
 
     config->setGroup( "Windows" );
     config->writeEntry(KWIN_ANIMSHADE, animateShade->isChecked());
     if (shadeHoverOn->isChecked())
         config->writeEntry(KWIN_SHADEHOVER, "on");
     else
         config->writeEntry(KWIN_SHADEHOVER, "off");
 
     v = getShadeHoverInterval();
     if (v<0) v = 0;
     config->writeEntry(KWIN_SHADEHOVER_INTERVAL, v);
 
     config->writeEntry(KWM_ELECTRIC_BORDER, getElectricBorders());
     config->writeEntry(KWM_ELECTRIC_BORDER_DELAY,getElectricBorderDelay());
 
     config->writeEntry(KWIN_FOCUS_STEALING, focusStealing->currentItem());
 
     if (standAlone)
     {
         config->sync();
         if ( !kapp->dcopClient()->isAttached() )
             kapp->dcopClient()->attach();
         kapp->dcopClient()->send("kwin*", "", "reconfigure()", "");
     }
     emit KCModule::changed(false);
 }
 
 void KAdvancedConfig::defaults()
 {
     setAnimateShade(true);
     setShadeHover(false);
     setShadeHoverInterval(250);
     setElectricBorders(0);
     setElectricBorderDelay(150);
-    setFocusStealing(2);
+//    setFocusStealing(2);
+    // TODO default to low for now
+    setFocusStealing(1);
     emit KCModule::changed(true);
 }
 
 void KAdvancedConfig::setEBorders()
 {
     delays->setEnabled(!active_disable->isChecked());
 }
 
 int KAdvancedConfig::getElectricBorders()
 {
     if (active_move->isChecked())
        return 1;
     if (active_always->isChecked())
        return 2;
     return 0;
 }
 
 int KAdvancedConfig::getElectricBorderDelay()
 {
     return delays->value();
 }
 
 void KAdvancedConfig::setElectricBorders(int i){
     switch(i)
     {
       case 1: active_move->setChecked(true); break;
       case 2: active_always->setChecked(true); break;
       default: active_disable->setChecked(true); break;
     }
     setEBorders();
 }
 
 void KAdvancedConfig::setElectricBorderDelay(int delay)
 {
     delays->setValue(delay);
 }
 
 
 KMovingConfig::~KMovingConfig ()
 {
     if (standAlone)
         delete config;
 }
 
 KMovingConfig::KMovingConfig (bool _standAlone, KConfig *_config, QWidget *parent, const char *)
     : KCModule(parent, "kcmkwm"), config(_config), standAlone(_standAlone)
 {
     QString wtstr;
     QBoxLayout *lay = new QVBoxLayout (this, 0, KDialog::spacingHint());
 
     windowsBox = new QButtonGroup(i18n("Windows"), this);
     windowsBox->setColumnLayout( 0, Qt::Horizontal );
 
     QBoxLayout *wLay = new QVBoxLayout (windowsBox->layout(), KDialog::spacingHint());
 
     QBoxLayout *bLay = new QVBoxLayout;
     wLay->addLayout(bLay);
 
     opaque = new QCheckBox(i18n("Di&splay content in moving windows"), windowsBox);
     bLay->addWidget(opaque);
     QWhatsThis::add( opaque, i18n("Enable this option if you want a window's content to be fully shown"
                                   " while moving it, instead of just showing a window 'skeleton'. The result may not be satisfying"
                                   " on slow machines without graphic acceleration.") );
 
     resizeOpaqueOn = new QCheckBox(i18n("Display content in &resizing windows"), windowsBox);
     bLay->addWidget(resizeOpaqueOn);
     QWhatsThis::add( resizeOpaqueOn, i18n("Enable this option if you want a window's content to be shown"
                                           " while resizing it, instead of just showing a window 'skeleton'. The result may not be satisfying"
                                           " on slow machines.") );
 
     geometryTipOn = new QCheckBox(i18n("Display window &geometry when moving or resizing"), windowsBox);
     bLay->addWidget(geometryTipOn);
     QWhatsThis::add(geometryTipOn, i18n("Enable this option if you want a window's geometry to be displayed"
 			    		" while it is being moved or resized. The window position relative"
 					" to the top-left corner of the screen is displayed together with"
 					" its size."));
 
     QGridLayout *rLay = new QGridLayout(2,3);
     bLay->addLayout(rLay);
     rLay->setColStretch(0,0);
     rLay->setColStretch(1,1);
 
     minimizeAnimOn = new QCheckBox(i18n("Animate minimi&ze and restore"),
                                    windowsBox);
     QWhatsThis::add( minimizeAnimOn, i18n("Enable this option if you want an animation shown when"
                                           " windows are minimized or restored." ) );
     rLay->addWidget(minimizeAnimOn,0,0);
 
     minimizeAnimSlider = new QSlider(0,10,10,0,QSlider::Horizontal, windowsBox);
     minimizeAnimSlider->setSteps(1, 1);
     // QSlider::Below clashes with a X11/X.h #define
     #undef Below
     minimizeAnimSlider->setTickmarks(QSlider::Below);
     rLay->addMultiCellWidget(minimizeAnimSlider,0,0,1,2);
 
     connect(minimizeAnimOn, SIGNAL(toggled(bool)), this, SLOT(setMinimizeAnim(bool)));
     connect(minimizeAnimSlider, SIGNAL(valueChanged(int)), this, SLOT(setMinimizeAnimSpeed(int)));
 
     minimizeAnimSlowLabel= new QLabel(i18n("Slow"),windowsBox);
     minimizeAnimSlowLabel->setAlignment(Qt::AlignTop|Qt::AlignLeft);
     rLay->addWidget(minimizeAnimSlowLabel,1,1);
 
     minimizeAnimFastLabel= new QLabel(i18n("Fast"),windowsBox);
     minimizeAnimFastLabel->setAlignment(Qt::AlignTop|Qt::AlignRight);
     rLay->addWidget(minimizeAnimFastLabel,1,2);
 
     wtstr = i18n("Here you can set the speed of the animation shown when windows are"
                  " minimized and restored. ");
     QWhatsThis::add( minimizeAnimSlider, wtstr );
     QWhatsThis::add( minimizeAnimSlowLabel, wtstr );
     QWhatsThis::add( minimizeAnimFastLabel, wtstr );
 
     moveResizeMaximized = new QCheckBox( i18n("Allow moving and resizing o&f maximized windows"), windowsBox);
     bLay->addWidget(moveResizeMaximized);
     QWhatsThis::add(moveResizeMaximized, i18n("When enabled, this feature activates the border of maximized windows"
                                               " and allows you to move or resize them,"
                                               " just like for normal windows"));
 
     QBoxLayout *vLay = new QHBoxLayout(bLay);
 
     QLabel *plcLabel = new QLabel(i18n("&Placement:"),windowsBox);
 
     placementCombo = new QComboBox(false, windowsBox);
     placementCombo->insertItem(i18n("Smart"), SMART_PLACEMENT);
     placementCombo->insertItem(i18n("Cascade"), CASCADE_PLACEMENT);
     placementCombo->insertItem(i18n("Random"), RANDOM_PLACEMENT);
     placementCombo->insertItem(i18n("Centered"), CENTERED_PLACEMENT);
     placementCombo->insertItem(i18n("Zero-Cornered"), ZEROCORNERED_PLACEMENT);
     // CT: disabling is needed as long as functionality misses in kwin
     //placementCombo->insertItem(i18n("Interactive"), INTERACTIVE_PLACEMENT);
     //placementCombo->insertItem(i18n("Manual"), MANUAL_PLACEMENT);
     placementCombo->setCurrentItem(SMART_PLACEMENT);
 
     // FIXME, when more policies have been added to KWin
     wtstr = i18n("The placement policy determines where a new window"
                  " will appear on the desktop. For now, there are three different policies:"
                  " <ul><li><em>Smart</em> will try to achieve a minimum overlap of windows</li>"
                  " <li><em>Cascade</em> will cascade the windows</li>"
                  " <li><em>Random</em> will use a random position</li></ul>") ;
 
     QWhatsThis::add( plcLabel, wtstr);
     QWhatsThis::add( placementCombo, wtstr);
 
     plcLabel->setBuddy(placementCombo);
     vLay->addWidget(plcLabel, 0);
     vLay->addWidget(placementCombo, 1, Qt::AlignLeft);
 
     bLay->addSpacing(10);
 
     lay->addWidget(windowsBox);
 
     //iTLabel = new QLabel(i18n("  Allowed overlap:\n"
     //                         "(% of desktop space)"),
     //             plcBox);
     //iTLabel->setAlignment(AlignTop|AlignHCenter);
     //pLay->addWidget(iTLabel,1,1);
 
     //interactiveTrigger = new QSpinBox(0, 500, 1, plcBox);
     //pLay->addWidget(interactiveTrigger,1,2);
 
     //pLay->addRowSpacing(2,KDialog::spacingHint());
 
     //lay->addWidget(plcBox);
 
 
     //CT 15mar98 - add EdgeResistance, BorderAttractor, WindowsAttractor config
     MagicBox = new QVButtonGroup(i18n("Snap Zones"), this);
     MagicBox->setMargin(15);
 
     BrdrSnap = new KIntNumInput(10, MagicBox);
     BrdrSnap->setSpecialValueText( i18n("none") );
     BrdrSnap->setRange( 0, MAX_BRDR_SNAP);
     BrdrSnap->setLabel(i18n("&Border snap zone:"));
     BrdrSnap->setSuffix(i18n(" pixels"));
     BrdrSnap->setSteps(1,10);
     QWhatsThis::add( BrdrSnap, i18n("Here you can set the snap zone for screen borders, i.e."
                                     " the 'strength' of the magnetic field which will make windows snap to the border when"
                                     " moved near it.") );
 
     WndwSnap = new KIntNumInput(10, MagicBox);
     WndwSnap->setSpecialValueText( i18n("none") );
     WndwSnap->setRange( 0, MAX_WNDW_SNAP);
     WndwSnap->setLabel(i18n("&Window snap zone:"));
     WndwSnap->setSuffix( i18n(" pixels"));
     BrdrSnap->setSteps(1,10);
     QWhatsThis::add( WndwSnap, i18n("Here you can set the snap zone for windows, i.e."
                                     " the 'strength' of the magnetic field which will make windows snap to each other when"
                                     " they're moved near another window.") );
 
     OverlapSnap=new QCheckBox(i18n("Snap windows onl&y when overlapping"),MagicBox);
     QWhatsThis::add( OverlapSnap, i18n("Here you can set that windows will be only"
                                        " snapped if you try to overlap them, i.e. they won't be snapped if the windows"
                                        " comes only near another window or border.") );
 
     lay->addWidget(MagicBox);
     lay->addStretch();
 
     load();
 
     // Any changes goes to slotChanged()
     connect( opaque, SIGNAL(clicked()), SLOT(changed()));
     connect( resizeOpaqueOn, SIGNAL(clicked()), SLOT(changed()));
     connect( geometryTipOn, SIGNAL(clicked()), SLOT(changed()));
     connect( minimizeAnimOn, SIGNAL(clicked() ), SLOT(changed()));
     connect( minimizeAnimSlider, SIGNAL(valueChanged(int)), SLOT(changed()));
     connect( moveResizeMaximized, SIGNAL(toggled(bool)), SLOT(changed()));
     connect( placementCombo, SIGNAL(activated(int)), SLOT(changed()));
     connect( BrdrSnap, SIGNAL(valueChanged(int)), SLOT(changed()));
     connect( WndwSnap, SIGNAL(valueChanged(int)), SLOT(changed()));
     connect( OverlapSnap, SIGNAL(clicked()), SLOT(changed()));
 }
 
 int KMovingConfig::getMove()
 {
     return (opaque->isChecked())? OPAQUE : TRANSPARENT;
 }
 
 void KMovingConfig::setMove(int trans)
 {
     opaque->setChecked(trans == OPAQUE);
 }
 
 void KMovingConfig::setGeometryTip(bool showGeometryTip)
 {
     geometryTipOn->setChecked(showGeometryTip);
 }
 
 bool KMovingConfig::getGeometryTip()
 {
     return geometryTipOn->isChecked();
 }
 
 // placement policy --- CT 31jan98 ---
 int KMovingConfig::getPlacement()
 {
     return placementCombo->currentItem();
 }
 
 void KMovingConfig::setPlacement(int plac)
 {
     placementCombo->setCurrentItem(plac);
 }
 
 bool KMovingConfig::getMinimizeAnim()
 {
     return minimizeAnimOn->isChecked();
 }
 
 int KMovingConfig::getMinimizeAnimSpeed()
 {
     return minimizeAnimSlider->value();
 }
 
 void KMovingConfig::setMinimizeAnim(bool anim)
 {
     minimizeAnimOn->setChecked( anim );
     minimizeAnimSlider->setEnabled( anim );
     minimizeAnimSlowLabel->setEnabled( anim );
     minimizeAnimFastLabel->setEnabled( anim );
 }
 
 void KMovingConfig::setMinimizeAnimSpeed(int speed)
 {
     minimizeAnimSlider->setValue(speed);
 }
 
 int KMovingConfig::getResizeOpaque()
 {
     return (resizeOpaqueOn->isChecked())? RESIZE_OPAQUE : RESIZE_TRANSPARENT;
 }
 
 void KMovingConfig::setResizeOpaque(int opaque)
 {
     resizeOpaqueOn->setChecked(opaque == RESIZE_OPAQUE);
 }
 
 void KMovingConfig::setMoveResizeMaximized(bool a) {
     moveResizeMaximized->setChecked(a);
 }
 
 void KMovingConfig::load( void )
 {
     QString key;
 
     config->setGroup( "Windows" );
 
     key = config->readEntry(KWIN_MOVE, "Opaque");
     if( key == "Transparent")
         setMove(TRANSPARENT);
     else if( key == "Opaque")
         setMove(OPAQUE);
 
     //CT 17Jun1998 - variable animation speed from 0 (none!!) to 10 (max)
     bool anim = config->readBoolEntry(KWIN_MINIMIZE_ANIM, true );
     int animSpeed = config->readNumEntry(KWIN_MINIMIZE_ANIM_SPEED, 5);
     if( animSpeed < 1 ) animSpeed = 0;
     if( animSpeed > 10 ) animSpeed = 10;
     setMinimizeAnim( anim );
     setMinimizeAnimSpeed( animSpeed );
 
     // DF: please keep the default consistent with kwin (options.cpp line 145)
     key = config->readEntry(KWIN_RESIZE_OPAQUE, "Opaque");
     if( key == "Opaque")
         setResizeOpaque(RESIZE_OPAQUE);
     else if ( key == "Transparent")
         setResizeOpaque(RESIZE_TRANSPARENT);
 
     //KS 10Jan2003 - Geometry Tip during window move/resize
     bool showGeomTip = config->readBoolEntry(KWIN_GEOMETRY, false);
     setGeometryTip( showGeomTip );
 
     // placement policy --- CT 19jan98 ---
     key = config->readEntry(KWIN_PLACEMENT);
     //CT 13mar98 interactive placement
 //   if( key.left(11) == "interactive") {
 //     setPlacement(INTERACTIVE_PLACEMENT);
 //     int comma_pos = key.find(',');
 //     if (comma_pos < 0)
 //       interactiveTrigger->setValue(0);
 //     else
 //       interactiveTrigger->setValue (key.right(key.length()
 //                           - comma_pos).toUInt(0));
 //     iTLabel->setEnabled(true);
 //     interactiveTrigger->show();
 //   }
 //   else {
 //     interactiveTrigger->setValue(0);
 //     iTLabel->setEnabled(false);
 //     interactiveTrigger->hide();
     if( key == "Random")
         setPlacement(RANDOM_PLACEMENT);
     else if( key == "Cascade")
         setPlacement(CASCADE_PLACEMENT); //CT 31jan98
     //CT 31mar98 manual placement
     else if( key == "manual")
         setPlacement(MANUAL_PLACEMENT);
     else if( key == "Centered")
         setPlacement(CENTERED_PLACEMENT);
     else if( key == "ZeroCornered")
         setPlacement(ZEROCORNERED_PLACEMENT);
 
     else
         setPlacement(SMART_PLACEMENT);
 //  }
 
     setMoveResizeMaximized(config->readBoolEntry(KWIN_MOVE_RESIZE_MAXIMIZED, true));
 
     int v;
 
     v = config->readNumEntry(KWM_BRDR_SNAP_ZONE, KWM_BRDR_SNAP_ZONE_DEFAULT);
     if (v > MAX_BRDR_SNAP) setBorderSnapZone(MAX_BRDR_SNAP);
     else if (v < 0) setBorderSnapZone (0);
     else setBorderSnapZone(v);
 
     v = config->readNumEntry(KWM_WNDW_SNAP_ZONE, KWM_WNDW_SNAP_ZONE_DEFAULT);
     if (v > MAX_WNDW_SNAP) setWindowSnapZone(MAX_WNDW_SNAP);
     else if (v < 0) setWindowSnapZone (0);
     else setWindowSnapZone(v);
 
     OverlapSnap->setChecked(config->readBoolEntry("SnapOnlyWhenOverlapping",false));
     emit KCModule::changed(false);
 }
 
 void KMovingConfig::save( void )
 {
     int v;
 
     config->setGroup( "Windows" );
 
     v = getMove();
     if (v == TRANSPARENT)
         config->writeEntry(KWIN_MOVE,"Transparent");
     else
         config->writeEntry(KWIN_MOVE,"Opaque");
 
     config->writeEntry(KWIN_GEOMETRY, getGeometryTip());
 
     // placement policy --- CT 31jan98 ---
     v =getPlacement();
     if (v == RANDOM_PLACEMENT)
         config->writeEntry(KWIN_PLACEMENT, "Random");
     else if (v == CASCADE_PLACEMENT)
         config->writeEntry(KWIN_PLACEMENT, "Cascade");
     else if (v == CENTERED_PLACEMENT)
         config->writeEntry(KWIN_PLACEMENT, "Centered");
     else if (v == ZEROCORNERED_PLACEMENT)
         config->writeEntry(KWIN_PLACEMENT, "ZeroCornered");
 //CT 13mar98 manual and interactive placement
 //   else if (v == MANUAL_PLACEMENT)
 //     config->writeEntry(KWIN_PLACEMENT, "Manual");
 //   else if (v == INTERACTIVE_PLACEMENT) {
 //       QString tmpstr = QString("Interactive,%1").arg(interactiveTrigger->value());
 //       config->writeEntry(KWIN_PLACEMENT, tmpstr);
 //   }
     else
         config->writeEntry(KWIN_PLACEMENT, "Smart");
 
     config->writeEntry(KWIN_MINIMIZE_ANIM, getMinimizeAnim());
     config->writeEntry(KWIN_MINIMIZE_ANIM_SPEED, getMinimizeAnimSpeed());
 
     v = getResizeOpaque();
     if (v == RESIZE_OPAQUE)
         config->writeEntry(KWIN_RESIZE_OPAQUE, "Opaque");
     else
         config->writeEntry(KWIN_RESIZE_OPAQUE, "Transparent");
 
     config->writeEntry(KWIN_MOVE_RESIZE_MAXIMIZED, moveResizeMaximized->isChecked());
 
 
     config->writeEntry(KWM_BRDR_SNAP_ZONE,getBorderSnapZone());
     config->writeEntry(KWM_WNDW_SNAP_ZONE,getWindowSnapZone());
     config->writeEntry("SnapOnlyWhenOverlapping",OverlapSnap->isChecked());
 
     if (standAlone)
     {
         config->sync();
         if ( !kapp->dcopClient()->isAttached() )
             kapp->dcopClient()->attach();
         kapp->dcopClient()->send("kwin*", "", "reconfigure()", "");
     }
     emit KCModule::changed(false);
 }
 
 void KMovingConfig::defaults()
 {
     setMove(OPAQUE);
     setResizeOpaque(RESIZE_TRANSPARENT);
     setGeometryTip(false);
     setPlacement(SMART_PLACEMENT);
     setMoveResizeMaximized(true);
 
     //copied from kcontrol/konq/kwindesktop, aleXXX
     setWindowSnapZone(KWM_WNDW_SNAP_ZONE_DEFAULT);
     setBorderSnapZone(KWM_BRDR_SNAP_ZONE_DEFAULT);
     OverlapSnap->setChecked(false);
 
     setMinimizeAnim( true );
     setMinimizeAnimSpeed( 5 );
     emit KCModule::changed(true);
 }
 
 int KMovingConfig::getBorderSnapZone() {
   return BrdrSnap->value();
 }
 
 void KMovingConfig::setBorderSnapZone(int pxls) {
   BrdrSnap->setValue(pxls);
 }
 
 int KMovingConfig::getWindowSnapZone() {
   return WndwSnap->value();
 }
 
 void KMovingConfig::setWindowSnapZone(int pxls) {
   WndwSnap->setValue(pxls);
 }
 
 #include "windows.moc"
diff --git a/options.cpp b/options.cpp
index 08f3f3800..ecf5b3cc2 100644
--- a/options.cpp
+++ b/options.cpp
@@ -1,242 +1,244 @@
 /*****************************************************************
  KWin - the KDE window manager
  This file is part of the KDE project.
 
 Copyright (C) 1999, 2000 Matthias Ettrich <ettrich@kde.org>
 Copyright (C) 2003 Lubos Lunak <l.lunak@kde.org>
 
 You can Freely distribute this program under the GNU General Public
 License. See the file "COPYING" for the exact licensing terms.
 ******************************************************************/
 
 #include "options.h"
 #include <qpalette.h>
 #include <qpixmap.h>
 #include <kapplication.h>
 #include <kconfig.h>
 #include <kglobal.h>
 #include <kglobalsettings.h>
 #include <qtooltip.h>
 
 namespace KWinInternal
 {
 
 Options::Options()
     :   electric_borders( 0 ),
         electric_border_delay(0)
     {
     d = new KDecorationOptionsPrivate;
     d->defaultKWinSettings();
     updateSettings();
     }
 
 Options::~Options()
     {
     delete d;
     }
 
 unsigned long Options::updateSettings()
     {
     KConfig *config = KGlobal::config();
     unsigned long changed = 0;
     changed |= d->updateKWinSettings( config ); // read decoration settings
 
     config->setGroup( "Windows" );
     moveMode = config->readEntry("MoveMode", "Opaque" ) == "Opaque"?Opaque:Transparent;
     resizeMode = config->readEntry("ResizeMode", "Opaque" ) == "Opaque"?Opaque:Transparent;
     show_geometry_tip = config->readBoolEntry("GeometryTip", false);
 
     QString val;
 
     val = config->readEntry ("FocusPolicy", "ClickToFocus");
     focusPolicy = ClickToFocus; // what a default :-)
     if ( val == "FocusFollowsMouse" )
         focusPolicy = FocusFollowsMouse;
     else if ( val == "FocusUnderMouse" )
         focusPolicy = FocusUnderMouse;
     else if ( val == "FocusStrictlyUnderMouse" )
         focusPolicy = FocusStrictlyUnderMouse;
 
     val = config->readEntry ("AltTabStyle", "KDE");
     altTabStyle = KDE; // what a default :-)
     if ( val == "CDE" )
         altTabStyle = CDE;
 
     rollOverDesktops = config->readBoolEntry("RollOverDesktops", TRUE);
     
-    focusStealingPreventionLevel = config->readNumEntry( "FocusStealingPreventionLevel", 2 );
+//    focusStealingPreventionLevel = config->readNumEntry( "FocusStealingPreventionLevel", 2 );
+    // TODO use low level for now
+    focusStealingPreventionLevel = config->readNumEntry( "FocusStealingPreventionLevel", 1 );
     focusStealingPreventionLevel = KMAX( 0, KMIN( 4, focusStealingPreventionLevel ));
 
     KConfig *gc = new KConfig("kdeglobals", false, false);
     bool isVirtual = KApplication::desktop()->isVirtualDesktop();
     gc->setGroup("Windows");
     xineramaEnabled = gc->readBoolEntry ("XineramaEnabled", isVirtual ) &&
                       isVirtual;
     if (xineramaEnabled) 
         {
         xineramaPlacementEnabled = gc->readBoolEntry ("XineramaPlacementEnabled", true);
         xineramaMovementEnabled = gc->readBoolEntry ("XineramaMovementEnabled", true);
         xineramaMaximizeEnabled = gc->readBoolEntry ("XineramaMaximizeEnabled", true);
         }
     else 
         {
         xineramaPlacementEnabled = xineramaMovementEnabled = xineramaMaximizeEnabled = false;
         }
     delete gc;
 
     val = config->readEntry("Placement","Smart");
     if (val == "Random")               placement = Random;
     else if (val == "Cascade")              placement = Cascade;
     else if (val == "Centered")     placement = Centered;
     else if (val == "ZeroCornered") placement = ZeroCornered;
     else                            placement = Smart;
 
     animateShade = config->readBoolEntry("AnimateShade", TRUE );
 
     animateMinimize = config->readBoolEntry("AnimateMinimize", TRUE );
     animateMinimizeSpeed = config->readNumEntry("AnimateMinimizeSpeed", 5 );
 
     if( focusPolicy == ClickToFocus ) 
         {
         autoRaise = false;
         autoRaiseInterval = 0;
         }
     else 
         {
         autoRaise = config->readBoolEntry("AutoRaise", FALSE );
         autoRaiseInterval = config->readNumEntry("AutoRaiseInterval", 0 );
         }
 
     shadeHover = config->readBoolEntry("ShadeHover", FALSE );
     shadeHoverInterval = config->readNumEntry("ShadeHoverInterval", 250 );
 
     // important: autoRaise implies ClickRaise
     clickRaise = autoRaise || config->readBoolEntry("ClickRaise", TRUE );
 
     borderSnapZone = config->readNumEntry("BorderSnapZone", 10);
     windowSnapZone = config->readNumEntry("WindowSnapZone", 10);
     snapOnlyWhenOverlapping=config->readBoolEntry("SnapOnlyWhenOverlapping",FALSE);
     electric_borders = config->readNumEntry("ElectricBorders", 0);
     electric_border_delay = config->readNumEntry("ElectricBorderDelay", 150);
 
     OpTitlebarDblClick = windowOperation( config->readEntry("TitlebarDoubleClickCommand", "Shade"), true );
 
     ignorePositionClasses = config->readListEntry("IgnorePositionClasses");
 
     // Mouse bindings
     config->setGroup( "MouseBindings");
     CmdActiveTitlebar1 = mouseCommand(config->readEntry("CommandActiveTitlebar1","Raise"), true );
     CmdActiveTitlebar2 = mouseCommand(config->readEntry("CommandActiveTitlebar2","Lower"), true );
     CmdActiveTitlebar3 = mouseCommand(config->readEntry("CommandActiveTitlebar3","Operations menu"), true );
     CmdInactiveTitlebar1 = mouseCommand(config->readEntry("CommandInactiveTitlebar1","Activate and raise"), true );
     CmdInactiveTitlebar2 = mouseCommand(config->readEntry("CommandInactiveTitlebar2","Activate and lower"), true );
     CmdInactiveTitlebar3 = mouseCommand(config->readEntry("CommandInactiveTitlebar3","Operations menu"), true );
     CmdWindow1 = mouseCommand(config->readEntry("CommandWindow1","Activate, raise and pass click"), false );
     CmdWindow2 = mouseCommand(config->readEntry("CommandWindow2","Activate and pass click"), false );
     CmdWindow3 = mouseCommand(config->readEntry("CommandWindow3","Activate and pass click"), false );
     CmdAllModKey = (config->readEntry("CommandAllKey","Alt") == "Meta") ? Qt::Key_Meta : Qt::Key_Alt;
     CmdAll1 = mouseCommand(config->readEntry("CommandAll1","Move"), false );
     CmdAll2 = mouseCommand(config->readEntry("CommandAll2","Toggle raise and lower"), false );
     CmdAll3 = mouseCommand(config->readEntry("CommandAll3","Resize"), false );
 
     // Read button tooltip animation effect from kdeglobals
     // Since we want to allow users to enable window decoration tooltips
     // and not kstyle tooltips and vise-versa, we don't read the
     // "EffectNoTooltip" setting from kdeglobals.
     KConfig globalConfig("kdeglobals");
     globalConfig.setGroup("KDE");
     fade_tooltips = globalConfig.readBoolEntry("EffectFadeTooltip", false);
     animate_tooltips = globalConfig.readBoolEntry("EffectAnimateTooltip", false);
     topmenus = globalConfig.readBoolEntry( "macStyle", false );
 
     KConfig kdesktopcfg( "kdesktoprc", true );
     kdesktopcfg.setGroup( "Menubar" );
     desktop_topmenu = kdesktopcfg.readBoolEntry( "ShowMenubar", false );
     if( desktop_topmenu )
         topmenus = true;
         
     QToolTip::setGloballyEnabled( d->show_tooltips );
 
     return changed;
     }
 
 
 // restricted should be true for operations that the user may not be able to repeat
 // if the window is moved out of the workspace (e.g. if the user moves a window
 // by the titlebar, and moves it too high beneath Kicker at the top edge, they
 // may not be able to move it back, unless they know about Alt+LMB)
 Options::WindowOperation Options::windowOperation(const QString &name, bool restricted )
     {
     if (name == "Move")
         return restricted ? MoveOp : UnrestrictedMoveOp;
     else if (name == "Resize")
         return restricted ? ResizeOp : UnrestrictedResizeOp;
     else if (name == "Maximize")
         return MaximizeOp;
     else if (name == "Minimize")
         return MinimizeOp;
     else if (name == "Close")
         return CloseOp;
     else if (name == "OnAllDesktops")
         return OnAllDesktopsOp;
     else if (name == "Shade")
         return ShadeOp;
     else if (name == "Operations")
         return OperationsOp;
     else if (name == "Maximize (vertical only)")
         return VMaximizeOp;
     else if (name == "Maximize (horizontal only)")
         return HMaximizeOp;
     else if (name == "Lower")
         return LowerOp;
     return NoOp;
     }
 
 Options::MouseCommand Options::mouseCommand(const QString &name, bool restricted )
     {
     QString lowerName = name.lower();
     if (lowerName == "raise") return MouseRaise;
     if (lowerName == "lower") return MouseLower;
     if (lowerName == "operations menu") return MouseOperationsMenu;
     if (lowerName == "toggle raise and lower") return MouseToggleRaiseAndLower;
     if (lowerName == "activate and raise") return MouseActivateAndRaise;
     if (lowerName == "activate and lower") return MouseActivateAndLower;
     if (lowerName == "activate") return MouseActivate;
     if (lowerName == "activate, raise and pass click") return MouseActivateRaiseAndPassClick;
     if (lowerName == "activate and pass click") return MouseActivateAndPassClick;
     if (lowerName == "activate, raise and move")
         return restricted ? MouseActivateRaiseAndMove : MouseActivateRaiseAndUnrestrictedMove;
     if (lowerName == "move") return restricted ? MouseMove : MouseUnrestrictedMove;
     if (lowerName == "resize") return restricted ? MouseResize : MouseUnrestrictedResize;
     if (lowerName == "shade") return MouseShade;
     if (lowerName == "minimize") return MouseMinimize;
     if (lowerName == "nothing") return MouseNothing;
     return MouseNothing;
     }
 
 bool Options::showGeometryTip()
     {
     return show_geometry_tip;
     }
 
 bool Options::fadeTooltips()
     {
     return fade_tooltips;
     }
 
 bool Options::animateTooltips()
     {
     return animate_tooltips;
     }
 
 int Options::electricBorders()
     {
     return electric_borders;
     }
 
 int Options::electricBorderDelay()
     {
     return electric_border_delay;
     }
 
 } // namespace