diff --git a/src/shaders/header_desktop.glsl b/src/shaders/header_desktop.glsl
index f73ec8c..8a72ad7 100644
--- a/src/shaders/header_desktop.glsl
+++ b/src/shaders/header_desktop.glsl
@@ -1,18 +1,24 @@
 /*
  * This file is part of KQuickCharts
  * SPDX-FileCopyrightText: 2019 Arjen Hiemstra <ahiemstra@heimr.nl>
  *
  * SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL
  */
 
 // This file contains common directives needed for the shaders to work.
 // It is included as the very first bit in the shader.
 // Important: If a specific GLSL version is needed, it should be set in this
 // file.
 
 // This file is intended for desktop OpenGL version 2.1 or greater.
 
 #version 120
 
+#ifdef VALIDATING
+    #define lowp
+    #define mediump
+    #define highp
+#endif
+
 #define API_DESKTOP
 #define LEGACY_STAGE_INOUT
diff --git a/src/shaders/sdf.glsl b/src/shaders/sdf.glsl
index f5f532d..ca07e39 100644
--- a/src/shaders/sdf.glsl
+++ b/src/shaders/sdf.glsl
@@ -1,286 +1,287 @@
 // SPDX-FileCopyrightText: 2019 Arjen Hiemstra <ahiemstra@heimr.nl>
 // SPDX-FileCopyrightText: 2017 Inigo Quilez
 //
 // SPDX-License-Identifier: MIT
 //
 // This file is based on
 // https://iquilezles.org/www/articles/distfunctions2d/distfunctions2d.htm
 
 // A maximum point count to be used for sdf_polygon input arrays.
 // Unfortunately even function inputs require a fixed size at declaration time
 // for arrays, unless we were to use OpenGL 4.5.
 // Since the polygon is most likely to be defined in a uniform, this should be
 // at least less than MAX_FRAGMENT_UNIFORM_COMPONENTS / 2 (since we need vec2).
 #define SDF_POLYGON_MAX_POINT_COUNT 400
 
+// A constant for pi
+const lowp float pi = acos(-1.0);
+
 /*********************************
     Shapes
 *********************************/
 
 // Distance field for a circle.
 //
 // \param point A point on the distance field.
 // \param radius The radius of the circle.
 //
 // \return The signed distance from point to the circle. If negative, point is
 //         inside the circle.
 lowp float sdf_circle(in lowp vec2 point, in lowp float radius)
 {
     return length(point) - radius;
 }
 
 // Distance field for a triangle.
 //
 // \param point A point on the distance field.
 // \param p0 The first vertex of the triangle.
 // \param p0 The second vertex of the triangle.
 // \param p0 The third vertex of the triangle.
 //
 // \note The ordering of the three vertices does not matter.
 //
 // \return The signed distance from point to triangle. If negative, point is
 //         inside the triangle.
 lowp float sdf_triangle(in lowp vec2 point, in lowp vec2 p0, in lowp vec2 p1, in lowp vec2 p2)
 {
     lowp vec2 e0 = p1 - p0;
     lowp vec2 e1 = p2 - p1;
     lowp vec2 e2 = p0 - p2;
 
     lowp vec2 v0 = point - p0;
     lowp vec2 v1 = point - p1;
     lowp vec2 v2 = point - p2;
 
     lowp vec2 pq0 = v0 - e0 * clamp( dot(v0, e0) / dot(e0, e0), 0.0, 1.0 );
     lowp vec2 pq1 = v1 - e1 * clamp( dot(v1, e1) / dot(e1, e1), 0.0, 1.0 );
     lowp vec2 pq2 = v2 - e2 * clamp( dot(v2, e2) / dot(e2, e2), 0.0, 1.0 );
 
     lowp float s = sign( e0.x*e2.y - e0.y*e2.x );
     lowp vec2 d = min(min(vec2(dot(pq0,pq0), s*(v0.x*e0.y-v0.y*e0.x)),
                           vec2(dot(pq1,pq1), s*(v1.x*e1.y-v1.y*e1.x))),
                           vec2(dot(pq2,pq2), s*(v2.x*e2.y-v2.y*e2.x)));
 
     return -sqrt(d.x)*sign(d.y);
 }
 
-#if !defined(API_ES2)
+#ifndef API_ES2
 // Distance field for an arbitrary polygon.
 //
 // \param point A point on the distance field.
 // \param vertices An array of points that make up the polygon.
 // \param count The amount of points to use for the polygon.
 //
 // \note points should be an array of vec2 of size SDF_POLYGON_MAX_POINT_COUNT.
 //       Use count to indicate how many items of that array should be used.
 //
 // \return The signed distance from point to triangle. If negative, point is
 //         inside the triangle.
 lowp float sdf_polygon(in lowp vec2 point, in lowp vec2[SDF_POLYGON_MAX_POINT_COUNT] vertices, in lowp int count)
 {
     lowp float d = dot(point - vertices[0], point - vertices[0]);
     lowp float s = 1.0;
     for (int i = 0, j = count - 1; i < count && i < SDF_POLYGON_MAX_POINT_COUNT; j = i, i++)
     {
         lowp vec2 e = vertices[j] - vertices[i];
         lowp vec2 w = point - vertices[i];
         lowp float h = clamp( dot(w, e) / dot(e, e), 0.0, 1.0 );
         lowp vec2 b = w - e * h;
         d = min(d, dot(b, b));
 
         bvec3 c = bvec3(point.y >= vertices[i].y, point.y < vertices[j].y, e.x * w.y > e.y * w.x);
         if(all(c) || all(not(c))) s *= -1.0;
     }
     return s * sqrt(d);
 }
 #endif
 
 // Distance field for a rectangle.
 //
 // \param point A point on the distance field.
 // \param rect A vec2 with the size of the rectangle.
 //
 // \return The signed distance from point to rectangle. If negative, point is
 //         inside the rectangle.
 lowp float sdf_rectangle(in lowp vec2 point, in lowp vec2 rect)
 {
     lowp vec2 d = abs(point) - rect;
     return length(max(d, 0.0)) + min(max(d.x, d.y), 0.0);
 }
 
 lowp float sdf_torus_segment(in lowp vec2 point, in lowp float start, in lowp float end, in lowp float inner_radius, in lowp float outer_radius)
 {
     start = clamp(start, 0.0, end);
     end = clamp(end, start, 2.0 * pi);
 
     lowp float angle = (end - start) / 2.0;
     lowp float rotation = (start + end) / 2.0;
 
     lowp vec2 rotated = point * mat2(cos(rotation), -sin(rotation), sin(rotation), cos(rotation));
     lowp vec2 c = vec2(sin(angle), cos(angle));
 
     rotated.x = abs(rotated.x);
     lowp float l = length(rotated) - outer_radius;
     lowp float m = length(rotated - c * clamp(dot(rotated, c), 0.0, outer_radius));
     return max(l, m * sign(c.y * rotated.x - c.x * rotated.y));
 }
 
 // float pie( in vec2 p, in float start, in float end, in float r )
 // {
 //     start = clamp(start, 0.0, end);
 //     end = clamp(end, start, 2.0 * PI);
 //
 //     float angle = (end - start) / 2.0;
 //
 //     float rot = (start + end) / 2.0;
 //
 //     vec2 rotated = p * mat2(cos(rot), -sin(rot), sin(rot), cos(rot));
 //     vec2 c = vec2(sin(angle), cos(angle));
 //
 //     rotated.x = abs(rotated.x);
 //     float l = length(rotated) - r;
 // 	float m = length(rotated - c * clamp(dot(rotated, c), 0.0, r));
 //     return max(l, m * sign(c.y * rotated.x - c.x * rotated.y));
 // }
 
 /*********************
     Operators
 *********************/
 
 // Convert a distance field to an annular (hollow) distance field.
 //
 // \param sdf The result of an sdf shape to convert.
 // \param thickness The thickness of the resulting shape.
 //
 // \return The value of sdf modified to an annular shape.
 lowp float sdf_annular(in lowp float sdf, in lowp float thickness)
 {
     return abs(sdf) - thickness;
 }
 
 // Union two sdf shapes together.
 //
 // \param sdf1 The first sdf shape.
 // \param sdf2 The second sdf shape.
 //
 // \return The union of sdf1 and sdf2, that is, the distance to both sdf1 and
 //         sdf2.
 lowp float sdf_union(in lowp float sdf1, in lowp float sdf2)
 {
     return min(sdf1, sdf2);
 }
 
 // Subtract two sdf shapes.
 //
 // \param sdf1 The first sdf shape.
 // \param sdf2 The second sdf shape.
 //
 // \return sdf1 with sdf2 subtracted from it.
 lowp float sdf_subtract(in lowp float sdf1, in lowp float sdf2)
 {
     return max(sdf1, -sdf2);
 }
 
 // Intersect two sdf shapes.
 //
 // \param sdf1 The first sdf shape.
 // \param sdf2 The second sdf shape.
 //
 // \return The intersection between sdf1 and sdf2, that is, the area where both
 //         sdf1 and sdf2 provide the same distance value.
 lowp float sdf_intersect(in lowp float sdf1, in lowp float sdf2)
 {
     return max(sdf1, sdf2);
 }
 
 // Smoothly intersect two sdf shapes.
 //
 // \param sdf1 The first sdf shape.
 // \param sdf2 The second sdf shape.
 // \param smoothing The amount of smoothing to apply.
 //
 // \return A smoothed version of the intersect operation.
 lowp float sdf_intersect_smooth(in lowp float sdf1, in lowp float sdf2, in lowp float smoothing)
 {
     lowp float h = clamp(0.5 - 0.5 * (sdf1 - sdf2) / smoothing, 0.0, 1.0);
     return mix(sdf1, sdf2, h) + smoothing * h * (1.0 - h);
 }
 
 // Round an sdf shape.
 //
 // \param sdf The sdf shape to round.
 // \param amount The amount of rounding to apply.
 //
 // \return The rounded shape of sdf.
 //         Note that rounding happens by basically selecting an isoline of sdf,
 //         therefore, the resulting shape may be larger than the input shape.
 lowp float sdf_round(in lowp float sdf, in lowp float amount)
 {
     return sdf - amount;
 }
 
 // Convert an sdf shape to an outline of its shape.
 //
 // \param sdf The sdf shape to turn into an outline.
 //
 // \return The outline of sdf.
 lowp float sdf_outline(in lowp float sdf)
 {
     return abs(sdf);
 }
 
 /********************
     Convenience
 ********************/
 
 // A constant to represent a "null" value of an sdf.
 // Since 0 is a point exactly on the outline of an sdf shape, and negative
 // values are inside the shape, this uses a very large positive constant to
 // indicate a value that is really far away from the actual sdf shape.
 const lowp float sdf_null = 99999.0;
 
 // A constant for a default level of smoothing when rendering an sdf.
 const lowp float sdf_default_smoothing = 0.625;
 
-const lowp float pi = acos(-1.0);
-
 // Render an sdf shape.
 //
 // This will render the sdf shape on top of whatever source color is input,
 // making sure to apply smoothing if desired.
 //
 // \param sdf The sdf shape to render.
 // \param sourceColor The source color to render on top of.
 // \param sdfColor The color to use for rendering the sdf shape.
 //
 // \return sourceColor with the sdf shape rendered on top.
 lowp vec4 sdf_render(in lowp float sdf, in lowp vec4 sourceColor, in lowp vec4 sdfColor)
 {
     lowp float g = fwidth(sdf);
     return mix(sourceColor, sdfColor, 1.0 - smoothstep(-sdf_default_smoothing * g, sdf_default_smoothing * g, sdf));
 }
 
 // Render an sdf shape.
 //
 // This is an overload of sdf_render(float, vec4, vec4) that allows specifying a
 // smoothing amount.
 //
 // \param smoothing The amount of smoothing to apply to the sdf.
 //
 lowp vec4 sdf_render(in lowp float sdf, in lowp vec4 sourceColor, in lowp vec4 sdfColor, in lowp float smoothing)
 {
     lowp float g = fwidth(sdf);
     return mix(sourceColor, sdfColor, 1.0 - smoothstep(-smoothing * g, smoothing * g, sdf));
 }
 
 // Render an sdf shape alpha-blended onto an existing color.
 //
 // This is an overload of sdf_render(float, vec4, vec4) that allows specifying a
 // blending amount and a smoothing amount.
 //
 // \param alpha The alpha to use for blending.
 // \param smoothing The amount of smoothing to apply to the sdf.
 //
 lowp vec4 sdf_render(in lowp float sdf, in lowp vec4 sourceColor, in lowp vec4 sdfColor, in lowp float alpha, in lowp float smoothing)
 {
     lowp float g = fwidth(sdf);
     return mix(sourceColor, sdfColor, alpha * (1.0 - smoothstep(-smoothing * g, smoothing * g, sdf)));
 }