diff --git a/.Doxyfile.cmake b/.Doxyfile.cmake --- a/.Doxyfile.cmake +++ b/.Doxyfile.cmake @@ -1,20 +1,6 @@ -# Copyright (c) 2013 Lamarque V. Souza (lamarque@kde.org). - -# This library is free software; you can redistribute it and/or -# modify it under the terms of the GNU Lesser General Public -# License as published by the Free Software Foundation; either -# version 2.1 of the License, or (at your option) version 3, or any -# later version accepted by the membership of KDE e.V. (or its -# successor approved by the membership of KDE e.V.), which shall -# act as a proxy defined in Section 6 of version 3 of the license. +# SPDX-FileCopyrightText: 2013 Lamarque V. Souza # -# This library is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# Lesser General Public License for more details. -# -# You should have received a copy of the GNU Lesser General Public -# License along with this library. If not, see . +# SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL # Doxyfile 1.8.1.2 @@ -32,90 +18,90 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all -# text before the first occurrence of this tag. Doxygen uses libiconv (or the -# iconv built into libc) for the transcoding. See +# This tag specifies the encoding used for all characters in the config file +# that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See # http://www.gnu.org/software/libiconv for the list of possible encodings. DOXYFILE_ENCODING = UTF-8 -# The PROJECT_NAME tag is a single word (or sequence of words) that should -# identify the project. Note that if you do not use Doxywizard you need +# The PROJECT_NAME tag is a single word (or sequence of words) that should +# identify the project. Note that if you do not use Doxywizard you need # to put quotes around the project name if it contains spaces. PROJECT_NAME = ModemManagerQt -# The PROJECT_NUMBER tag can be used to enter a project or revision number. -# This could be handy for archiving the generated documentation or +# The PROJECT_NUMBER tag can be used to enter a project or revision number. +# This could be handy for archiving the generated documentation or # if some version control system is used. PROJECT_NUMBER = v@VERSION@ -# Using the PROJECT_BRIEF tag one can provide an optional one line description -# for a project that appears at the top of each page and should give viewer +# Using the PROJECT_BRIEF tag one can provide an optional one line description +# for a project that appears at the top of each page and should give viewer # a quick idea about the purpose of the project. Keep the description short. PROJECT_BRIEF = "Qt wrapper for ModemManager1 API" -# With the PROJECT_LOGO tag one can specify an logo or icon that is -# included in the documentation. The maximum height of the logo should not -# exceed 55 pixels and the maximum width should not exceed 200 pixels. +# With the PROJECT_LOGO tag one can specify an logo or icon that is +# included in the documentation. The maximum height of the logo should not +# exceed 55 pixels and the maximum width should not exceed 200 pixels. # Doxygen will copy the logo to the output directory. PROJECT_LOGO = -# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) -# base path where the generated documentation will be put. -# If a relative path is entered, it will be relative to the location +# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) +# base path where the generated documentation will be put. +# If a relative path is entered, it will be relative to the location # where doxygen was started. If left blank the current directory will be used. OUTPUT_DIRECTORY = doc -# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create -# 4096 sub-directories (in 2 levels) under the output directory of each output -# format and will distribute the generated files over these directories. -# Enabling this option can be useful when feeding doxygen a huge amount of -# source files, where putting all generated files in the same directory would +# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create +# 4096 sub-directories (in 2 levels) under the output directory of each output +# format and will distribute the generated files over these directories. +# Enabling this option can be useful when feeding doxygen a huge amount of +# source files, where putting all generated files in the same directory would # otherwise cause performance problems for the file system. CREATE_SUBDIRS = NO -# The OUTPUT_LANGUAGE tag is used to specify the language in which all -# documentation generated by doxygen is written. Doxygen will use this -# information to generate all constant output in the proper language. -# The default language is English, other supported languages are: -# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, -# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, -# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, +# The OUTPUT_LANGUAGE tag is used to specify the language in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all constant output in the proper language. +# The default language is English, other supported languages are: +# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, +# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, +# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English +# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, +# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, # Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English -# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will -# include brief member descriptions after the members that are listed in -# the file and class documentation (similar to JavaDoc). +# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will +# include brief member descriptions after the members that are listed in +# the file and class documentation (similar to JavaDoc). # Set to NO to disable this. BRIEF_MEMBER_DESC = YES -# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend -# the brief description of a member or function before the detailed description. -# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the +# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend +# the brief description of a member or function before the detailed description. +# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the # brief descriptions will be completely suppressed. REPEAT_BRIEF = YES -# This tag implements a quasi-intelligent brief description abbreviator -# that is used to form the text in various listings. Each string -# in this list, if found as the leading text of the brief description, will be -# stripped from the text and the result after processing the whole list, is -# used as the annotated text. Otherwise, the brief description is used as-is. -# If left blank, the following values are used ("$name" is automatically -# replaced with the name of the entity): "The $name class" "The $name widget" -# "The $name file" "is" "provides" "specifies" "contains" +# This tag implements a quasi-intelligent brief description abbreviator +# that is used to form the text in various listings. Each string +# in this list, if found as the leading text of the brief description, will be +# stripped from the text and the result after processing the whole list, is +# used as the annotated text. Otherwise, the brief description is used as-is. +# If left blank, the following values are used ("$name" is automatically +# replaced with the name of the entity): "The $name class" "The $name widget" +# "The $name file" "is" "provides" "specifies" "contains" # "represents" "a" "an" "the" ABBREVIATE_BRIEF = "The $name class" \ @@ -130,262 +116,262 @@ an \ the -# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then -# Doxygen will generate a detailed section even if there is only a brief +# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then +# Doxygen will generate a detailed section even if there is only a brief # description. ALWAYS_DETAILED_SEC = NO -# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all -# inherited members of a class in the documentation of that class as if those -# members were ordinary class members. Constructors, destructors and assignment +# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all +# inherited members of a class in the documentation of that class as if those +# members were ordinary class members. Constructors, destructors and assignment # operators of the base classes will not be shown. INLINE_INHERITED_MEMB = NO -# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full -# path before files name in the file list and in the header files. If set +# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full +# path before files name in the file list and in the header files. If set # to NO the shortest path that makes the file name unique will be used. FULL_PATH_NAMES = YES -# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag -# can be used to strip a user-defined part of the path. Stripping is -# only done if one of the specified strings matches the left-hand part of -# the path. The tag can be used to show relative paths in the file list. -# If left blank the directory from which doxygen is run is used as the +# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag +# can be used to strip a user-defined part of the path. Stripping is +# only done if one of the specified strings matches the left-hand part of +# the path. The tag can be used to show relative paths in the file list. +# If left blank the directory from which doxygen is run is used as the # path to strip. -STRIP_FROM_PATH = +STRIP_FROM_PATH = -# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of -# the path mentioned in the documentation of a class, which tells -# the reader which header file to include in order to use a class. -# If left blank only the name of the header file containing the class -# definition is used. Otherwise one should specify the include paths that +# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of +# the path mentioned in the documentation of a class, which tells +# the reader which header file to include in order to use a class. +# If left blank only the name of the header file containing the class +# definition is used. Otherwise one should specify the include paths that # are normally passed to the compiler using the -I flag. -STRIP_FROM_INC_PATH = +STRIP_FROM_INC_PATH = -# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter -# (but less readable) file names. This can be useful if your file system +# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter +# (but less readable) file names. This can be useful if your file system # doesn't support long names like on DOS, Mac, or CD-ROM. SHORT_NAMES = NO -# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen -# will interpret the first line (until the first dot) of a JavaDoc-style -# comment as the brief description. If set to NO, the JavaDoc -# comments will behave just like regular Qt-style comments +# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen +# will interpret the first line (until the first dot) of a JavaDoc-style +# comment as the brief description. If set to NO, the JavaDoc +# comments will behave just like regular Qt-style comments # (thus requiring an explicit @brief command for a brief description.) JAVADOC_AUTOBRIEF = NO -# If the QT_AUTOBRIEF tag is set to YES then Doxygen will -# interpret the first line (until the first dot) of a Qt-style -# comment as the brief description. If set to NO, the comments -# will behave just like regular Qt-style comments (thus requiring +# If the QT_AUTOBRIEF tag is set to YES then Doxygen will +# interpret the first line (until the first dot) of a Qt-style +# comment as the brief description. If set to NO, the comments +# will behave just like regular Qt-style comments (thus requiring # an explicit \brief command for a brief description.) QT_AUTOBRIEF = NO -# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen -# treat a multi-line C++ special comment block (i.e. a block of //! or /// -# comments) as a brief description. This used to be the default behaviour. -# The new default is to treat a multi-line C++ comment block as a detailed +# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen +# treat a multi-line C++ special comment block (i.e. a block of //! or /// +# comments) as a brief description. This used to be the default behaviour. +# The new default is to treat a multi-line C++ comment block as a detailed # description. Set this tag to YES if you prefer the old behaviour instead. MULTILINE_CPP_IS_BRIEF = NO -# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented -# member inherits the documentation from any documented member that it +# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented +# member inherits the documentation from any documented member that it # re-implements. INHERIT_DOCS = YES -# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce -# a new page for each member. If set to NO, the documentation of a member will +# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce +# a new page for each member. If set to NO, the documentation of a member will # be part of the file/class/namespace that contains it. SEPARATE_MEMBER_PAGES = NO -# The TAB_SIZE tag can be used to set the number of spaces in a tab. +# The TAB_SIZE tag can be used to set the number of spaces in a tab. # Doxygen uses this value to replace tabs by spaces in code fragments. TAB_SIZE = 4 -# This tag can be used to specify a number of aliases that acts -# as commands in the documentation. An alias has the form "name=value". -# For example adding "sideeffect=\par Side Effects:\n" will allow you to -# put the command \sideeffect (or @sideeffect) in the documentation, which -# will result in a user-defined paragraph with heading "Side Effects:". +# This tag can be used to specify a number of aliases that acts +# as commands in the documentation. An alias has the form "name=value". +# For example adding "sideeffect=\par Side Effects:\n" will allow you to +# put the command \sideeffect (or @sideeffect) in the documentation, which +# will result in a user-defined paragraph with heading "Side Effects:". # You can put \n's in the value part of an alias to insert newlines. -ALIASES = +ALIASES = -# This tag can be used to specify a number of word-keyword mappings (TCL only). -# A mapping has the form "name=value". For example adding -# "class=itcl::class" will allow you to use the command class in the +# This tag can be used to specify a number of word-keyword mappings (TCL only). +# A mapping has the form "name=value". For example adding +# "class=itcl::class" will allow you to use the command class in the # itcl::class meaning. -TCL_SUBST = +TCL_SUBST = -# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C -# sources only. Doxygen will then generate output that is more tailored for C. -# For instance, some of the names that are used will be different. The list +# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C +# sources only. Doxygen will then generate output that is more tailored for C. +# For instance, some of the names that are used will be different. The list # of all members will be omitted, etc. OPTIMIZE_OUTPUT_FOR_C = NO -# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java -# sources only. Doxygen will then generate output that is more tailored for -# Java. For instance, namespaces will be presented as packages, qualified +# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java +# sources only. Doxygen will then generate output that is more tailored for +# Java. For instance, namespaces will be presented as packages, qualified # scopes will look different, etc. OPTIMIZE_OUTPUT_JAVA = NO -# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran -# sources only. Doxygen will then generate output that is more tailored for +# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran +# sources only. Doxygen will then generate output that is more tailored for # Fortran. OPTIMIZE_FOR_FORTRAN = NO -# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL -# sources. Doxygen will then generate output that is tailored for +# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL +# sources. Doxygen will then generate output that is tailored for # VHDL. OPTIMIZE_OUTPUT_VHDL = NO -# Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions +# Doxygen selects the parser to use depending on the extension of the files it +# parses. With this tag you can assign which parser to use for a given extension. +# Doxygen has a built-in mapping, but you can override or extend it using this +# tag. The format is ext=language, where ext is a file extension, and language +# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, +# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make +# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C +# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions # you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. -EXTENSION_MAPPING = +EXTENSION_MAPPING = -# If MARKDOWN_SUPPORT is enabled (the default) then doxygen pre-processes all -# comments according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. -# The output of markdown processing is further processed by doxygen, so you -# can mix doxygen, HTML, and XML commands with Markdown formatting. +# If MARKDOWN_SUPPORT is enabled (the default) then doxygen pre-processes all +# comments according to the Markdown format, which allows for more readable +# documentation. See http://daringfireball.net/projects/markdown/ for details. +# The output of markdown processing is further processed by doxygen, so you +# can mix doxygen, HTML, and XML commands with Markdown formatting. # Disable only in case of backward compatibilities issues. MARKDOWN_SUPPORT = YES -# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want -# to include (a tag file for) the STL sources as input, then you should -# set this tag to YES in order to let doxygen match functions declarations and -# definitions whose arguments contain STL classes (e.g. func(std::string); v.s. -# func(std::string) {}). This also makes the inheritance and collaboration +# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want +# to include (a tag file for) the STL sources as input, then you should +# set this tag to YES in order to let doxygen match functions declarations and +# definitions whose arguments contain STL classes (e.g. func(std::string); v.s. +# func(std::string) {}). This also makes the inheritance and collaboration # diagrams that involve STL classes more complete and accurate. BUILTIN_STL_SUPPORT = NO -# If you use Microsoft's C++/CLI language, you should set this option to YES to +# If you use Microsoft's C++/CLI language, you should set this option to YES to # enable parsing support. CPP_CLI_SUPPORT = NO -# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only. -# Doxygen will parse them like normal C++ but will assume all classes use public +# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only. +# Doxygen will parse them like normal C++ but will assume all classes use public # instead of private inheritance when no explicit protection keyword is present. SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the +# For Microsoft's IDL there are propget and propput attributes to indicate getter +# and setter methods for a property. Setting this option to YES (the default) +# will make doxygen replace the get and set methods by a property in the +# documentation. This will only work if the methods are indeed getting or +# setting a simple type. If this is not the case, or you want to show the # methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES -# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC -# tag is set to YES, then doxygen will reuse the documentation of the first -# member in the group (if any) for the other members of the group. By default +# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC +# tag is set to YES, then doxygen will reuse the documentation of the first +# member in the group (if any) for the other members of the group. By default # all members of a group must be documented explicitly. DISTRIBUTE_GROUP_DOC = NO -# Set the SUBGROUPING tag to YES (the default) to allow class member groups of -# the same type (for instance a group of public functions) to be put as a -# subgroup of that type (e.g. under the Public Functions section). Set it to -# NO to prevent subgrouping. Alternatively, this can be done per class using +# Set the SUBGROUPING tag to YES (the default) to allow class member groups of +# the same type (for instance a group of public functions) to be put as a +# subgroup of that type (e.g. under the Public Functions section). Set it to +# NO to prevent subgrouping. Alternatively, this can be done per class using # the \nosubgrouping command. SUBGROUPING = YES -# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and -# unions are shown inside the group in which they are included (e.g. using -# @ingroup) instead of on a separate page (for HTML and Man pages) or +# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and +# unions are shown inside the group in which they are included (e.g. using +# @ingroup) instead of on a separate page (for HTML and Man pages) or # section (for LaTeX and RTF). INLINE_GROUPED_CLASSES = NO -# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man +# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and +# unions with only public data fields will be shown inline in the documentation +# of the scope in which they are defined (i.e. file, namespace, or group +# documentation), provided this scope is documented. If set to NO (the default), +# structs, classes, and unions are shown on a separate page (for HTML and Man # pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO -# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum -# is documented as struct, union, or enum with the name of the typedef. So -# typedef struct TypeS {} TypeT, will appear in the documentation as a struct -# with name TypeT. When disabled the typedef will appear as a member of a file, -# namespace, or class. And the struct will be named TypeS. This can typically -# be useful for C code in case the coding convention dictates that all compound +# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum +# is documented as struct, union, or enum with the name of the typedef. So +# typedef struct TypeS {} TypeT, will appear in the documentation as a struct +# with name TypeT. When disabled the typedef will appear as a member of a file, +# namespace, or class. And the struct will be named TypeS. This can typically +# be useful for C code in case the coding convention dictates that all compound # types are typedef'ed and only the typedef is referenced, never the tag name. TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, +# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to +# determine which symbols to keep in memory and which to flush to disk. +# When the cache is full, less often used symbols will be written to disk. +# For small to medium size projects (<1000 input files) the default value is +# probably good enough. For larger projects a too small cache size can cause +# doxygen to be busy swapping symbols to and from disk most of the time +# causing a significant performance penalty. +# If the system has enough physical memory increasing the cache will improve the +# performance by keeping more symbols in memory. Note that the value works on +# a logarithmic scale so increasing the size by one will roughly double the +# memory usage. The cache size is given by this formula: +# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, # corresponding to a cache size of 2^16 = 65536 symbols. SYMBOL_CACHE_SIZE = 0 -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, +# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be +# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given +# their name and scope. Since this can be an expensive process and often the +# same symbol appear multiple times in the code, doxygen keeps a cache of +# pre-resolved symbols. If the cache is too small doxygen will become slower. +# If the cache is too large, memory is wasted. The cache size is given by this +# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, # corresponding to a cache size of 2^16 = 65536 symbols. LOOKUP_CACHE_SIZE = 0 #--------------------------------------------------------------------------- # Build related configuration options #--------------------------------------------------------------------------- -# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in -# documentation are documented, even if no documentation was available. -# Private class members and static file members will be hidden unless +# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in +# documentation are documented, even if no documentation was available. +# Private class members and static file members will be hidden unless # the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES -# If the EXTRACT_PRIVATE tag is set to YES all private members of a class +# If the EXTRACT_PRIVATE tag is set to YES all private members of a class # will be included in the documentation. EXTRACT_PRIVATE = NO @@ -395,310 +381,310 @@ EXTRACT_PACKAGE = NO -# If the EXTRACT_STATIC tag is set to YES all static members of a file +# If the EXTRACT_STATIC tag is set to YES all static members of a file # will be included in the documentation. EXTRACT_STATIC = NO -# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) -# defined locally in source files will be included in the documentation. +# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) +# defined locally in source files will be included in the documentation. # If set to NO only classes defined in header files are included. EXTRACT_LOCAL_CLASSES = NO -# This flag is only useful for Objective-C code. When set to YES local -# methods, which are defined in the implementation section but not in -# the interface are included in the documentation. +# This flag is only useful for Objective-C code. When set to YES local +# methods, which are defined in the implementation section but not in +# the interface are included in the documentation. # If set to NO (the default) only methods in the interface are included. EXTRACT_LOCAL_METHODS = YES -# If this flag is set to YES, the members of anonymous namespaces will be -# extracted and appear in the documentation as a namespace called -# 'anonymous_namespace{file}', where file will be replaced with the base -# name of the file that contains the anonymous namespace. By default +# If this flag is set to YES, the members of anonymous namespaces will be +# extracted and appear in the documentation as a namespace called +# 'anonymous_namespace{file}', where file will be replaced with the base +# name of the file that contains the anonymous namespace. By default # anonymous namespaces are hidden. EXTRACT_ANON_NSPACES = YES -# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all -# undocumented members of documented classes, files or namespaces. -# If set to NO (the default) these members will be included in the -# various overviews, but no documentation section is generated. +# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all +# undocumented members of documented classes, files or namespaces. +# If set to NO (the default) these members will be included in the +# various overviews, but no documentation section is generated. # This option has no effect if EXTRACT_ALL is enabled. HIDE_UNDOC_MEMBERS = NO -# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all -# undocumented classes that are normally visible in the class hierarchy. -# If set to NO (the default) these classes will be included in the various +# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all +# undocumented classes that are normally visible in the class hierarchy. +# If set to NO (the default) these classes will be included in the various # overviews. This option has no effect if EXTRACT_ALL is enabled. HIDE_UNDOC_CLASSES = NO -# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all -# friend (class|struct|union) declarations. -# If set to NO (the default) these declarations will be included in the +# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all +# friend (class|struct|union) declarations. +# If set to NO (the default) these declarations will be included in the # documentation. HIDE_FRIEND_COMPOUNDS = NO -# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any -# documentation blocks found inside the body of a function. -# If set to NO (the default) these blocks will be appended to the +# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any +# documentation blocks found inside the body of a function. +# If set to NO (the default) these blocks will be appended to the # function's detailed documentation block. HIDE_IN_BODY_DOCS = NO -# The INTERNAL_DOCS tag determines if documentation -# that is typed after a \internal command is included. If the tag is set -# to NO (the default) then the documentation will be excluded. +# The INTERNAL_DOCS tag determines if documentation +# that is typed after a \internal command is included. If the tag is set +# to NO (the default) then the documentation will be excluded. # Set it to YES to include the internal documentation. INTERNAL_DOCS = NO -# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate -# file names in lower-case letters. If set to YES upper-case letters are also -# allowed. This is useful if you have classes or files whose names only differ -# in case and if your file system supports case sensitive file names. Windows +# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate +# file names in lower-case letters. If set to YES upper-case letters are also +# allowed. This is useful if you have classes or files whose names only differ +# in case and if your file system supports case sensitive file names. Windows # and Mac users are advised to set this option to NO. CASE_SENSE_NAMES = YES -# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen -# will show members with their full class and namespace scopes in the +# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen +# will show members with their full class and namespace scopes in the # documentation. If set to YES the scope will be hidden. HIDE_SCOPE_NAMES = NO -# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen -# will put a list of the files that are included by a file in the documentation +# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen +# will put a list of the files that are included by a file in the documentation # of that file. SHOW_INCLUDE_FILES = YES -# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen -# will list include files with double quotes in the documentation +# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen +# will list include files with double quotes in the documentation # rather than with sharp brackets. FORCE_LOCAL_INCLUDES = NO -# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] +# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] # is inserted in the documentation for inline members. INLINE_INFO = YES -# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen -# will sort the (detailed) documentation of file and class members -# alphabetically by member name. If set to NO the members will appear in +# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen +# will sort the (detailed) documentation of file and class members +# alphabetically by member name. If set to NO the members will appear in # declaration order. SORT_MEMBER_DOCS = YES -# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the -# brief documentation of file, namespace and class members alphabetically -# by member name. If set to NO (the default) the members will appear in +# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the +# brief documentation of file, namespace and class members alphabetically +# by member name. If set to NO (the default) the members will appear in # declaration order. SORT_BRIEF_DOCS = NO -# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen -# will sort the (brief and detailed) documentation of class members so that -# constructors and destructors are listed first. If set to NO (the default) -# the constructors will appear in the respective orders defined by -# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS. -# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO +# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen +# will sort the (brief and detailed) documentation of class members so that +# constructors and destructors are listed first. If set to NO (the default) +# the constructors will appear in the respective orders defined by +# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS. +# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO # and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO. SORT_MEMBERS_CTORS_1ST = NO -# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the -# hierarchy of group names into alphabetical order. If set to NO (the default) +# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the +# hierarchy of group names into alphabetical order. If set to NO (the default) # the group names will appear in their defined order. SORT_GROUP_NAMES = NO -# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be -# sorted by fully-qualified names, including namespaces. If set to -# NO (the default), the class list will be sorted only by class name, -# not including the namespace part. -# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. -# Note: This option applies only to the class list, not to the +# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be +# sorted by fully-qualified names, including namespaces. If set to +# NO (the default), the class list will be sorted only by class name, +# not including the namespace part. +# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. +# Note: This option applies only to the class list, not to the # alphabetical list. SORT_BY_SCOPE_NAME = NO -# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to -# do proper type resolution of all parameters of a function it will reject a -# match between the prototype and the implementation of a member function even -# if there is only one candidate or it is obvious which candidate to choose -# by doing a simple string match. By disabling STRICT_PROTO_MATCHING doxygen +# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to +# do proper type resolution of all parameters of a function it will reject a +# match between the prototype and the implementation of a member function even +# if there is only one candidate or it is obvious which candidate to choose +# by doing a simple string match. By disabling STRICT_PROTO_MATCHING doxygen # will still accept a match between prototype and implementation in such cases. STRICT_PROTO_MATCHING = NO -# The GENERATE_TODOLIST tag can be used to enable (YES) or -# disable (NO) the todo list. This list is created by putting \todo +# The GENERATE_TODOLIST tag can be used to enable (YES) or +# disable (NO) the todo list. This list is created by putting \todo # commands in the documentation. GENERATE_TODOLIST = YES -# The GENERATE_TESTLIST tag can be used to enable (YES) or -# disable (NO) the test list. This list is created by putting \test +# The GENERATE_TESTLIST tag can be used to enable (YES) or +# disable (NO) the test list. This list is created by putting \test # commands in the documentation. GENERATE_TESTLIST = YES -# The GENERATE_BUGLIST tag can be used to enable (YES) or -# disable (NO) the bug list. This list is created by putting \bug +# The GENERATE_BUGLIST tag can be used to enable (YES) or +# disable (NO) the bug list. This list is created by putting \bug # commands in the documentation. GENERATE_BUGLIST = YES -# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or -# disable (NO) the deprecated list. This list is created by putting +# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or +# disable (NO) the deprecated list. This list is created by putting # \deprecated commands in the documentation. GENERATE_DEPRECATEDLIST= YES -# The ENABLED_SECTIONS tag can be used to enable conditional +# The ENABLED_SECTIONS tag can be used to enable conditional # documentation sections, marked by \if sectionname ... \endif. -ENABLED_SECTIONS = +ENABLED_SECTIONS = -# The MAX_INITIALIZER_LINES tag determines the maximum number of lines -# the initial value of a variable or macro consists of for it to appear in -# the documentation. If the initializer consists of more lines than specified -# here it will be hidden. Use a value of 0 to hide initializers completely. -# The appearance of the initializer of individual variables and macros in the -# documentation can be controlled using \showinitializer or \hideinitializer +# The MAX_INITIALIZER_LINES tag determines the maximum number of lines +# the initial value of a variable or macro consists of for it to appear in +# the documentation. If the initializer consists of more lines than specified +# here it will be hidden. Use a value of 0 to hide initializers completely. +# The appearance of the initializer of individual variables and macros in the +# documentation can be controlled using \showinitializer or \hideinitializer # command in the documentation regardless of this setting. MAX_INITIALIZER_LINES = 30 -# Set the SHOW_USED_FILES tag to NO to disable the list of files generated -# at the bottom of the documentation of classes and structs. If set to YES the +# Set the SHOW_USED_FILES tag to NO to disable the list of files generated +# at the bottom of the documentation of classes and structs. If set to YES the # list will mention the files that were used to generate the documentation. SHOW_USED_FILES = NO -# Set the SHOW_FILES tag to NO to disable the generation of the Files page. -# This will remove the Files entry from the Quick Index and from the +# Set the SHOW_FILES tag to NO to disable the generation of the Files page. +# This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. SHOW_FILES = NO -# Set the SHOW_NAMESPACES tag to NO to disable the generation of the -# Namespaces page. This will remove the Namespaces entry from the Quick Index +# Set the SHOW_NAMESPACES tag to NO to disable the generation of the +# Namespaces page. This will remove the Namespaces entry from the Quick Index # and from the Folder Tree View (if specified). The default is YES. SHOW_NAMESPACES = YES -# The FILE_VERSION_FILTER tag can be used to specify a program or script that -# doxygen should invoke to get the current version for each file (typically from -# the version control system). Doxygen will invoke the program by executing (via -# popen()) the command , where is the value of -# the FILE_VERSION_FILTER tag, and is the name of an input file -# provided by doxygen. Whatever the program writes to standard output +# The FILE_VERSION_FILTER tag can be used to specify a program or script that +# doxygen should invoke to get the current version for each file (typically from +# the version control system). Doxygen will invoke the program by executing (via +# popen()) the command , where is the value of +# the FILE_VERSION_FILTER tag, and is the name of an input file +# provided by doxygen. Whatever the program writes to standard output # is used as the file version. See the manual for examples. -FILE_VERSION_FILTER = +FILE_VERSION_FILTER = -# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed -# by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. To create the layout file -# that represents doxygen's defaults, run doxygen with the -l option. -# You can optionally specify a file name after the option, if omitted +# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed +# by doxygen. The layout file controls the global structure of the generated +# output files in an output format independent way. To create the layout file +# that represents doxygen's defaults, run doxygen with the -l option. +# You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. -LAYOUT_FILE = +LAYOUT_FILE = -# The CITE_BIB_FILES tag can be used to specify one or more bib files -# containing the references data. This must be a list of .bib files. The -# .bib extension is automatically appended if omitted. Using this command -# requires the bibtex tool to be installed. See also -# http://en.wikipedia.org/wiki/BibTeX for more info. For LaTeX the style -# of the bibliography can be controlled using LATEX_BIB_STYLE. To use this +# The CITE_BIB_FILES tag can be used to specify one or more bib files +# containing the references data. This must be a list of .bib files. The +# .bib extension is automatically appended if omitted. Using this command +# requires the bibtex tool to be installed. See also +# http://en.wikipedia.org/wiki/BibTeX for more info. For LaTeX the style +# of the bibliography can be controlled using LATEX_BIB_STYLE. To use this # feature you need bibtex and perl available in the search path. -CITE_BIB_FILES = +CITE_BIB_FILES = #--------------------------------------------------------------------------- # configuration options related to warning and progress messages #--------------------------------------------------------------------------- -# The QUIET tag can be used to turn on/off the messages that are generated +# The QUIET tag can be used to turn on/off the messages that are generated # by doxygen. Possible values are YES and NO. If left blank NO is used. QUIET = NO -# The WARNINGS tag can be used to turn on/off the warning messages that are -# generated by doxygen. Possible values are YES and NO. If left blank +# The WARNINGS tag can be used to turn on/off the warning messages that are +# generated by doxygen. Possible values are YES and NO. If left blank # NO is used. WARNINGS = YES -# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings -# for undocumented members. If EXTRACT_ALL is set to YES then this flag will +# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings +# for undocumented members. If EXTRACT_ALL is set to YES then this flag will # automatically be disabled. WARN_IF_UNDOCUMENTED = YES -# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for -# potential errors in the documentation, such as not documenting some -# parameters in a documented function, or documenting parameters that +# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for +# potential errors in the documentation, such as not documenting some +# parameters in a documented function, or documenting parameters that # don't exist or using markup commands wrongly. WARN_IF_DOC_ERROR = YES -# The WARN_NO_PARAMDOC option can be enabled to get warnings for -# functions that are documented, but have no documentation for their parameters -# or return value. If set to NO (the default) doxygen will only warn about -# wrong or incomplete parameter documentation, but not about the absence of +# The WARN_NO_PARAMDOC option can be enabled to get warnings for +# functions that are documented, but have no documentation for their parameters +# or return value. If set to NO (the default) doxygen will only warn about +# wrong or incomplete parameter documentation, but not about the absence of # documentation. WARN_NO_PARAMDOC = NO -# The WARN_FORMAT tag determines the format of the warning messages that -# doxygen can produce. The string should contain the $file, $line, and $text -# tags, which will be replaced by the file and line number from which the -# warning originated and the warning text. Optionally the format may contain -# $version, which will be replaced by the version of the file (if it could +# The WARN_FORMAT tag determines the format of the warning messages that +# doxygen can produce. The string should contain the $file, $line, and $text +# tags, which will be replaced by the file and line number from which the +# warning originated and the warning text. Optionally the format may contain +# $version, which will be replaced by the version of the file (if it could # be obtained via FILE_VERSION_FILTER) WARN_FORMAT = "$file:$line: $text" -# The WARN_LOGFILE tag can be used to specify a file to which warning -# and error messages should be written. If left blank the output is written +# The WARN_LOGFILE tag can be used to specify a file to which warning +# and error messages should be written. If left blank the output is written # to stderr. -WARN_LOGFILE = +WARN_LOGFILE = #--------------------------------------------------------------------------- # configuration options related to the input files #--------------------------------------------------------------------------- -# The INPUT tag can be used to specify the files and/or directories that contain -# documented source files. You may enter file names like "myfile.cpp" or -# directories like "/usr/src/myproject". Separate the files or directories +# The INPUT tag can be used to specify the files and/or directories that contain +# documented source files. You may enter file names like "myfile.cpp" or +# directories like "/usr/src/myproject". Separate the files or directories # with spaces. INPUT = "@CMAKE_CURRENT_SOURCE_DIR@" -# This tag can be used to specify the character encoding of the source files -# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is -# also the default input encoding. Doxygen uses libiconv (or the iconv built -# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for +# This tag can be used to specify the character encoding of the source files +# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is +# also the default input encoding. Doxygen uses libiconv (or the iconv built +# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for # the list of possible encodings. INPUT_ENCODING = UTF-8 -# If the value of the INPUT tag contains directories, you can use the -# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp -# and *.h) to filter out the source-files in the directories. If left -# blank the following patterns are tested: -# *.c *.cc *.cxx *.cpp *.c++ *.d *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh -# *.hxx *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.dox *.py +# If the value of the INPUT tag contains directories, you can use the +# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp +# and *.h) to filter out the source-files in the directories. If left +# blank the following patterns are tested: +# *.c *.cc *.cxx *.cpp *.c++ *.d *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh +# *.hxx *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.dox *.py # *.f90 *.f *.for *.vhd *.vhdl FILE_PATTERNS = *.c \ @@ -736,1109 +722,1109 @@ *.vhd \ *.vhdl -# The RECURSIVE tag can be used to turn specify whether or not subdirectories -# should be searched for input files as well. Possible values are YES and NO. +# The RECURSIVE tag can be used to turn specify whether or not subdirectories +# should be searched for input files as well. Possible values are YES and NO. # If left blank NO is used. RECURSIVE = YES -# The EXCLUDE tag can be used to specify files and/or directories that should be -# excluded from the INPUT source files. This way you can easily exclude a -# subdirectory from a directory tree whose root is specified with the INPUT tag. -# Note that relative paths are relative to the directory from which doxygen is +# The EXCLUDE tag can be used to specify files and/or directories that should be +# excluded from the INPUT source files. This way you can easily exclude a +# subdirectory from a directory tree whose root is specified with the INPUT tag. +# Note that relative paths are relative to the directory from which doxygen is # run. EXCLUDE = @CMAKE_CURRENT_SOURCE_DIR@/examples @CMAKE_CURRENT_SOURCE_DIR@/tests @CMAKE_CURRENT_SOURCE_DIR@/dbus -# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or -# directories that are symbolic links (a Unix file system feature) are excluded +# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or +# directories that are symbolic links (a Unix file system feature) are excluded # from the input. EXCLUDE_SYMLINKS = NO -# If the value of the INPUT tag contains directories, you can use the -# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude -# certain files from those directories. Note that the wildcards are matched -# against the file with absolute path, so to exclude all test directories +# If the value of the INPUT tag contains directories, you can use the +# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude +# certain files from those directories. Note that the wildcards are matched +# against the file with absolute path, so to exclude all test directories # for example use the pattern */test/* EXCLUDE_PATTERNS = *_p.h -# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names -# (namespaces, classes, functions, etc.) that should be excluded from the -# output. The symbol name can be a fully qualified name, a word, or if the -# wildcard * is used, a substring. Examples: ANamespace, AClass, +# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names +# (namespaces, classes, functions, etc.) that should be excluded from the +# output. The symbol name can be a fully qualified name, a word, or if the +# wildcard * is used, a substring. Examples: ANamespace, AClass, # AClass::ANamespace, ANamespace::*Test -EXCLUDE_SYMBOLS = +EXCLUDE_SYMBOLS = -# The EXAMPLE_PATH tag can be used to specify one or more files or -# directories that contain example code fragments that are included (see +# The EXAMPLE_PATH tag can be used to specify one or more files or +# directories that contain example code fragments that are included (see # the \include command). -EXAMPLE_PATH = +EXAMPLE_PATH = -# If the value of the EXAMPLE_PATH tag contains directories, you can use the -# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp -# and *.h) to filter out the source-files in the directories. If left +# If the value of the EXAMPLE_PATH tag contains directories, you can use the +# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp +# and *.h) to filter out the source-files in the directories. If left # blank all files are included. EXAMPLE_PATTERNS = -# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be -# searched for input files to be used with the \include or \dontinclude -# commands irrespective of the value of the RECURSIVE tag. +# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be +# searched for input files to be used with the \include or \dontinclude +# commands irrespective of the value of the RECURSIVE tag. # Possible values are YES and NO. If left blank NO is used. EXAMPLE_RECURSIVE = NO -# The IMAGE_PATH tag can be used to specify one or more files or -# directories that contain image that are included in the documentation (see +# The IMAGE_PATH tag can be used to specify one or more files or +# directories that contain image that are included in the documentation (see # the \image command). IMAGE_PATH = -# The INPUT_FILTER tag can be used to specify a program that doxygen should -# invoke to filter for each input file. Doxygen will invoke the filter program -# by executing (via popen()) the command , where -# is the value of the INPUT_FILTER tag, and is the name of an -# input file. Doxygen will then use the output that the filter program writes -# to standard output. If FILTER_PATTERNS is specified, this tag will be +# The INPUT_FILTER tag can be used to specify a program that doxygen should +# invoke to filter for each input file. Doxygen will invoke the filter program +# by executing (via popen()) the command , where +# is the value of the INPUT_FILTER tag, and is the name of an +# input file. Doxygen will then use the output that the filter program writes +# to standard output. If FILTER_PATTERNS is specified, this tag will be # ignored. -INPUT_FILTER = +INPUT_FILTER = -# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern -# basis. Doxygen will compare the file name with each pattern and apply the -# filter if there is a match. The filters are a list of the form: -# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further -# info on how filters are used. If FILTER_PATTERNS is empty or if +# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern +# basis. Doxygen will compare the file name with each pattern and apply the +# filter if there is a match. The filters are a list of the form: +# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further +# info on how filters are used. If FILTER_PATTERNS is empty or if # non of the patterns match the file name, INPUT_FILTER is applied. -FILTER_PATTERNS = +FILTER_PATTERNS = -# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using -# INPUT_FILTER) will be used to filter the input files when producing source +# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using +# INPUT_FILTER) will be used to filter the input files when producing source # files to browse (i.e. when SOURCE_BROWSER is set to YES). FILTER_SOURCE_FILES = YES -# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file -# pattern. A pattern will override the setting for FILTER_PATTERN (if any) -# and it is also possible to disable source filtering for a specific pattern -# using *.ext= (so without naming a filter). This option only has effect when +# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file +# pattern. A pattern will override the setting for FILTER_PATTERN (if any) +# and it is also possible to disable source filtering for a specific pattern +# using *.ext= (so without naming a filter). This option only has effect when # FILTER_SOURCE_FILES is enabled. -FILTER_SOURCE_PATTERNS = +FILTER_SOURCE_PATTERNS = #--------------------------------------------------------------------------- # configuration options related to source browsing #--------------------------------------------------------------------------- -# If the SOURCE_BROWSER tag is set to YES then a list of source files will -# be generated. Documented entities will be cross-referenced with these sources. -# Note: To get rid of all source code in the generated output, make sure also +# If the SOURCE_BROWSER tag is set to YES then a list of source files will +# be generated. Documented entities will be cross-referenced with these sources. +# Note: To get rid of all source code in the generated output, make sure also # VERBATIM_HEADERS is set to NO. SOURCE_BROWSER = YES -# Setting the INLINE_SOURCES tag to YES will include the body +# Setting the INLINE_SOURCES tag to YES will include the body # of functions and classes directly in the documentation. INLINE_SOURCES = NO -# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct -# doxygen to hide any special comment blocks from generated source code +# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct +# doxygen to hide any special comment blocks from generated source code # fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES -# If the REFERENCED_BY_RELATION tag is set to YES -# then for each documented function all documented +# If the REFERENCED_BY_RELATION tag is set to YES +# then for each documented function all documented # functions referencing it will be listed. REFERENCED_BY_RELATION = NO -# If the REFERENCES_RELATION tag is set to YES -# then for each documented function all documented entities +# If the REFERENCES_RELATION tag is set to YES +# then for each documented function all documented entities # called/used by that function will be listed. REFERENCES_RELATION = NO -# If the REFERENCES_LINK_SOURCE tag is set to YES (the default) -# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from -# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will +# If the REFERENCES_LINK_SOURCE tag is set to YES (the default) +# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from +# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will # link to the source code. Otherwise they will link to the documentation. REFERENCES_LINK_SOURCE = NO -# If the USE_HTAGS tag is set to YES then the references to source code -# will point to the HTML generated by the htags(1) tool instead of doxygen -# built-in source browser. The htags tool is part of GNU's global source -# tagging system (see http://www.gnu.org/software/global/global.html). You +# If the USE_HTAGS tag is set to YES then the references to source code +# will point to the HTML generated by the htags(1) tool instead of doxygen +# built-in source browser. The htags tool is part of GNU's global source +# tagging system (see http://www.gnu.org/software/global/global.html). You # will need version 4.8.6 or higher. USE_HTAGS = NO -# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen -# will generate a verbatim copy of the header file for each class for +# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen +# will generate a verbatim copy of the header file for each class for # which an include is specified. Set to NO to disable this. VERBATIM_HEADERS = NO #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- -# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index -# of all compounds will be generated. Enable this if the project +# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index +# of all compounds will be generated. Enable this if the project # contains a lot of classes, structs, unions or interfaces. ALPHABETICAL_INDEX = YES -# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then -# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns +# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then +# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns # in which this list will be split (can be a number in the range [1..20]) COLS_IN_ALPHA_INDEX = 5 -# In case all classes in a project start with a common prefix, all -# classes will be put under the same header in the alphabetical index. -# The IGNORE_PREFIX tag can be used to specify one or more prefixes that +# In case all classes in a project start with a common prefix, all +# classes will be put under the same header in the alphabetical index. +# The IGNORE_PREFIX tag can be used to specify one or more prefixes that # should be ignored while generating the index headers. -IGNORE_PREFIX = +IGNORE_PREFIX = #--------------------------------------------------------------------------- # configuration options related to the HTML output #--------------------------------------------------------------------------- -# If the GENERATE_HTML tag is set to YES (the default) Doxygen will +# If the GENERATE_HTML tag is set to YES (the default) Doxygen will # generate HTML output. GENERATE_HTML = YES -# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be # put in front of it. If left blank `html' will be used as the default path. HTML_OUTPUT = html -# The HTML_FILE_EXTENSION tag can be used to specify the file extension for -# each generated HTML page (for example: .htm,.php,.asp). If it is left blank +# The HTML_FILE_EXTENSION tag can be used to specify the file extension for +# each generated HTML page (for example: .htm,.php,.asp). If it is left blank # doxygen will generate files with .html extension. HTML_FILE_EXTENSION = .html -# The HTML_HEADER tag can be used to specify a personal HTML header for -# each generated HTML page. If it is left blank doxygen will generate a -# standard header. Note that when using a custom header you are responsible -# for the proper inclusion of any scripts and style sheets that doxygen -# needs, which is dependent on the configuration options used. -# It is advised to generate a default header using "doxygen -w html -# header.html footer.html stylesheet.css YourConfigFile" and then modify -# that header. Note that the header is subject to change so you typically -# have to redo this when upgrading to a newer version of doxygen or when +# The HTML_HEADER tag can be used to specify a personal HTML header for +# each generated HTML page. If it is left blank doxygen will generate a +# standard header. Note that when using a custom header you are responsible +# for the proper inclusion of any scripts and style sheets that doxygen +# needs, which is dependent on the configuration options used. +# It is advised to generate a default header using "doxygen -w html +# header.html footer.html stylesheet.css YourConfigFile" and then modify +# that header. Note that the header is subject to change so you typically +# have to redo this when upgrading to a newer version of doxygen or when # changing the value of configuration settings such as GENERATE_TREEVIEW! -HTML_HEADER = +HTML_HEADER = -# The HTML_FOOTER tag can be used to specify a personal HTML footer for -# each generated HTML page. If it is left blank doxygen will generate a +# The HTML_FOOTER tag can be used to specify a personal HTML footer for +# each generated HTML page. If it is left blank doxygen will generate a # standard footer. -HTML_FOOTER = +HTML_FOOTER = -# The HTML_STYLESHEET tag can be used to specify a user-defined cascading -# style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own +# The HTML_STYLESHEET tag can be used to specify a user-defined cascading +# style sheet that is used by each HTML page. It can be used to +# fine-tune the look of the HTML output. If the tag is left blank doxygen +# will generate a default style sheet. Note that doxygen will try to copy +# the style sheet file to the HTML output directory, so don't put your own # style sheet in the HTML output directory as well, or it will be erased! -HTML_STYLESHEET = +HTML_STYLESHEET = -# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or -# other source files which should be copied to the HTML output directory. Note -# that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these -# files. In the HTML_STYLESHEET file, use the file name only. Also note that +# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or +# other source files which should be copied to the HTML output directory. Note +# that these files will be copied to the base HTML output directory. Use the +# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. -HTML_EXTRA_FILES = +HTML_EXTRA_FILES = -# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. -# Doxygen will adjust the colors in the style sheet and background images -# according to this color. Hue is specified as an angle on a colorwheel, -# see http://en.wikipedia.org/wiki/Hue for more information. -# For instance the value 0 represents red, 60 is yellow, 120 is green, -# 180 is cyan, 240 is blue, 300 purple, and 360 is red again. +# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. +# Doxygen will adjust the colors in the style sheet and background images +# according to this color. Hue is specified as an angle on a colorwheel, +# see http://en.wikipedia.org/wiki/Hue for more information. +# For instance the value 0 represents red, 60 is yellow, 120 is green, +# 180 is cyan, 240 is blue, 300 purple, and 360 is red again. # The allowed range is 0 to 359. HTML_COLORSTYLE_HUE = 220 -# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of -# the colors in the HTML output. For a value of 0 the output will use +# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of +# the colors in the HTML output. For a value of 0 the output will use # grayscales only. A value of 255 will produce the most vivid colors. HTML_COLORSTYLE_SAT = 100 -# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to -# the luminance component of the colors in the HTML output. Values below -# 100 gradually make the output lighter, whereas values above 100 make -# the output darker. The value divided by 100 is the actual gamma applied, -# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2, +# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to +# the luminance component of the colors in the HTML output. Values below +# 100 gradually make the output lighter, whereas values above 100 make +# the output darker. The value divided by 100 is the actual gamma applied, +# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2, # and 100 does not change the gamma. HTML_COLORSTYLE_GAMMA = 80 -# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML -# page will contain the date and time when the page was generated. Setting +# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML +# page will contain the date and time when the page was generated. Setting # this to NO can help when comparing the output of multiple runs. HTML_TIMESTAMP = YES -# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML -# documentation will contain sections that can be hidden and shown after the +# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML +# documentation will contain sections that can be hidden and shown after the # page has loaded. HTML_DYNAMIC_SECTIONS = NO -# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of -# entries shown in the various tree structured indices initially; the user -# can expand and collapse entries dynamically later on. Doxygen will expand -# the tree to such a level that at most the specified number of entries are -# visible (unless a fully collapsed tree already exceeds this amount). -# So setting the number of entries 1 will produce a full collapsed tree by -# default. 0 is a special value representing an infinite number of entries +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries # and will result in a full expanded tree by default. HTML_INDEX_NUM_ENTRIES = 100 -# If the GENERATE_DOCSET tag is set to YES, additional index files -# will be generated that can be used as input for Apple's Xcode 3 -# integrated development environment, introduced with OSX 10.5 (Leopard). -# To create a documentation set, doxygen will generate a Makefile in the -# HTML output directory. Running make will produce the docset in that -# directory and running "make install" will install the docset in -# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find -# it at startup. -# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html +# If the GENERATE_DOCSET tag is set to YES, additional index files +# will be generated that can be used as input for Apple's Xcode 3 +# integrated development environment, introduced with OSX 10.5 (Leopard). +# To create a documentation set, doxygen will generate a Makefile in the +# HTML output directory. Running make will produce the docset in that +# directory and running "make install" will install the docset in +# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find +# it at startup. +# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html # for more information. GENERATE_DOCSET = NO -# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the -# feed. A documentation feed provides an umbrella under which multiple -# documentation sets from a single provider (such as a company or product suite) +# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the +# feed. A documentation feed provides an umbrella under which multiple +# documentation sets from a single provider (such as a company or product suite) # can be grouped. DOCSET_FEEDNAME = "Doxygen generated docs" -# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that -# should uniquely identify the documentation set bundle. This should be a -# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen +# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that +# should uniquely identify the documentation set bundle. This should be a +# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen # will append .docset to the name. DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify +# the documentation publisher. This should be a reverse domain-name style # string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher # The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher. DOCSET_PUBLISHER_NAME = Publisher -# If the GENERATE_HTMLHELP tag is set to YES, additional index files -# will be generated that can be used as input for tools like the -# Microsoft HTML help workshop to generate a compiled HTML help file (.chm) +# If the GENERATE_HTMLHELP tag is set to YES, additional index files +# will be generated that can be used as input for tools like the +# Microsoft HTML help workshop to generate a compiled HTML help file (.chm) # of the generated HTML documentation. GENERATE_HTMLHELP = NO -# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can -# be used to specify the file name of the resulting .chm file. You -# can add a path in front of the file if the result should not be +# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can +# be used to specify the file name of the resulting .chm file. You +# can add a path in front of the file if the result should not be # written to the html output directory. -CHM_FILE = +CHM_FILE = -# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can -# be used to specify the location (absolute path including file name) of -# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run +# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can +# be used to specify the location (absolute path including file name) of +# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run # the HTML help compiler on the generated index.hhp. -HHC_LOCATION = +HHC_LOCATION = -# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag -# controls if a separate .chi index file is generated (YES) or that +# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag +# controls if a separate .chi index file is generated (YES) or that # it should be included in the master .chm file (NO). GENERATE_CHI = NO -# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING -# is used to encode HtmlHelp index (hhk), content (hhc) and project file +# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING +# is used to encode HtmlHelp index (hhk), content (hhc) and project file # content. -CHM_INDEX_ENCODING = +CHM_INDEX_ENCODING = -# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag -# controls whether a binary table of contents is generated (YES) or a +# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag +# controls whether a binary table of contents is generated (YES) or a # normal table of contents (NO) in the .chm file. BINARY_TOC = NO -# The TOC_EXPAND flag can be set to YES to add extra items for group members +# The TOC_EXPAND flag can be set to YES to add extra items for group members # to the contents of the HTML help documentation and to the tree view. TOC_EXPAND = NO -# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and -# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated -# that can be used as input for Qt's qhelpgenerator to generate a +# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and +# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated +# that can be used as input for Qt's qhelpgenerator to generate a # Qt Compressed Help (.qch) of the generated HTML documentation. GENERATE_QHP = NO -# If the QHG_LOCATION tag is specified, the QCH_FILE tag can -# be used to specify the file name of the resulting .qch file. +# If the QHG_LOCATION tag is specified, the QCH_FILE tag can +# be used to specify the file name of the resulting .qch file. # The path specified is relative to the HTML output folder. -QCH_FILE = +QCH_FILE = -# The QHP_NAMESPACE tag specifies the namespace to use when generating -# Qt Help Project output. For more information please see +# The QHP_NAMESPACE tag specifies the namespace to use when generating +# Qt Help Project output. For more information please see # http://doc.trolltech.com/qthelpproject.html#namespace QHP_NAMESPACE = org.doxygen.Project -# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating -# Qt Help Project output. For more information please see +# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating +# Qt Help Project output. For more information please see # http://doc.trolltech.com/qthelpproject.html#virtual-folders QHP_VIRTUAL_FOLDER = doc -# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to -# add. For more information please see +# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to +# add. For more information please see # http://doc.trolltech.com/qthelpproject.html#custom-filters -QHP_CUST_FILTER_NAME = +QHP_CUST_FILTER_NAME = -# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the -# custom filter to add. For more information please see -# +# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the +# custom filter to add. For more information please see +# # Qt Help Project / Custom Filters. -QHP_CUST_FILTER_ATTRS = +QHP_CUST_FILTER_ATTRS = -# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this -# project's -# filter section matches. -# +# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this +# project's +# filter section matches. +# # Qt Help Project / Filter Attributes. -QHP_SECT_FILTER_ATTRS = +QHP_SECT_FILTER_ATTRS = -# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can -# be used to specify the location of Qt's qhelpgenerator. -# If non-empty doxygen will try to run qhelpgenerator on the generated +# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can +# be used to specify the location of Qt's qhelpgenerator. +# If non-empty doxygen will try to run qhelpgenerator on the generated # .qhp file. -QHG_LOCATION = +QHG_LOCATION = -# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files -# will be generated, which together with the HTML files, form an Eclipse help -# plugin. To install this plugin and make it available under the help contents -# menu in Eclipse, the contents of the directory containing the HTML and XML -# files needs to be copied into the plugins directory of eclipse. The name of -# the directory within the plugins directory should be the same as -# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before +# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files +# will be generated, which together with the HTML files, form an Eclipse help +# plugin. To install this plugin and make it available under the help contents +# menu in Eclipse, the contents of the directory containing the HTML and XML +# files needs to be copied into the plugins directory of eclipse. The name of +# the directory within the plugins directory should be the same as +# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before # the help appears. GENERATE_ECLIPSEHELP = NO -# A unique identifier for the eclipse help plugin. When installing the plugin -# the directory name containing the HTML and XML files should also have +# A unique identifier for the eclipse help plugin. When installing the plugin +# the directory name containing the HTML and XML files should also have # this name. ECLIPSE_DOC_ID = org.doxygen.Project -# The DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) -# at top of each HTML page. The value NO (the default) enables the index and -# the value YES disables it. Since the tabs have the same information as the -# navigation tree you can set this option to NO if you already set +# The DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) +# at top of each HTML page. The value NO (the default) enables the index and +# the value YES disables it. Since the tabs have the same information as the +# navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. DISABLE_INDEX = NO -# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index -# structure should be generated to display hierarchical information. -# If the tag value is set to YES, a side panel will be generated -# containing a tree-like index structure (just like the one that -# is generated for HTML Help). For this to work a browser that supports -# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser). -# Windows users are probably better off using the HTML help feature. -# Since the tree basically has the same information as the tab index you +# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index +# structure should be generated to display hierarchical information. +# If the tag value is set to YES, a side panel will be generated +# containing a tree-like index structure (just like the one that +# is generated for HTML Help). For this to work a browser that supports +# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser). +# Windows users are probably better off using the HTML help feature. +# Since the tree basically has the same information as the tab index you # could consider to set DISABLE_INDEX to NO when enabling this option. GENERATE_TREEVIEW = NO -# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values -# (range [0,1..20]) that doxygen will group on one line in the generated HTML -# documentation. Note that a value of 0 will completely suppress the enum +# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values +# (range [0,1..20]) that doxygen will group on one line in the generated HTML +# documentation. Note that a value of 0 will completely suppress the enum # values from appearing in the overview section. ENUM_VALUES_PER_LINE = 4 -# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be -# used to set the initial width (in pixels) of the frame in which the tree +# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be +# used to set the initial width (in pixels) of the frame in which the tree # is shown. TREEVIEW_WIDTH = 250 -# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open +# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open # links to external symbols imported via tag files in a separate window. EXT_LINKS_IN_WINDOW = NO -# Use this tag to change the font size of Latex formulas included -# as images in the HTML documentation. The default is 10. Note that -# when you change the font size after a successful doxygen run you need -# to manually remove any form_*.png images from the HTML output directory +# Use this tag to change the font size of Latex formulas included +# as images in the HTML documentation. The default is 10. Note that +# when you change the font size after a successful doxygen run you need +# to manually remove any form_*.png images from the HTML output directory # to force them to be regenerated. FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images -# generated for formulas are transparent PNGs. Transparent PNGs are -# not supported properly for IE 6.0, but are supported on all modern browsers. -# Note that when changing this option you need to delete any form_*.png files +# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# generated for formulas are transparent PNGs. Transparent PNGs are +# not supported properly for IE 6.0, but are supported on all modern browsers. +# Note that when changing this option you need to delete any form_*.png files # in the HTML output before the changes have effect. FORMULA_TRANSPARENT = YES -# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax -# (see http://www.mathjax.org) which uses client side Javascript for the -# rendering instead of using prerendered bitmaps. Use this if you do not -# have LaTeX installed or if you want to formulas look prettier in the HTML -# output. When enabled you may also need to install MathJax separately and +# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax +# (see http://www.mathjax.org) which uses client side Javascript for the +# rendering instead of using prerendered bitmaps. Use this if you do not +# have LaTeX installed or if you want to formulas look prettier in the HTML +# output. When enabled you may also need to install MathJax separately and # configure the path to it using the MATHJAX_RELPATH option. USE_MATHJAX = NO -# When MathJax is enabled you need to specify the location relative to the -# HTML output directory using the MATHJAX_RELPATH option. The destination -# directory should contain the MathJax.js script. For instance, if the mathjax -# directory is located at the same level as the HTML output directory, then -# MATHJAX_RELPATH should be ../mathjax. The default value points to -# the MathJax Content Delivery Network so you can quickly see the result without -# installing MathJax. However, it is strongly recommended to install a local +# When MathJax is enabled you need to specify the location relative to the +# HTML output directory using the MATHJAX_RELPATH option. The destination +# directory should contain the MathJax.js script. For instance, if the mathjax +# directory is located at the same level as the HTML output directory, then +# MATHJAX_RELPATH should be ../mathjax. The default value points to +# the MathJax Content Delivery Network so you can quickly see the result without +# installing MathJax. However, it is strongly recommended to install a local # copy of MathJax from http://www.mathjax.org before deployment. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest -# The MATHJAX_EXTENSIONS tag can be used to specify one or MathJax extension +# The MATHJAX_EXTENSIONS tag can be used to specify one or MathJax extension # names that should be enabled during MathJax rendering. -MATHJAX_EXTENSIONS = +MATHJAX_EXTENSIONS = -# When the SEARCHENGINE tag is enabled doxygen will generate a search box -# for the HTML output. The underlying search engine uses javascript -# and DHTML and should work on any modern browser. Note that when using -# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets -# (GENERATE_DOCSET) there is already a search function so this one should -# typically be disabled. For large projects the javascript based search engine +# When the SEARCHENGINE tag is enabled doxygen will generate a search box +# for the HTML output. The underlying search engine uses javascript +# and DHTML and should work on any modern browser. Note that when using +# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets +# (GENERATE_DOCSET) there is already a search function so this one should +# typically be disabled. For large projects the javascript based search engine # can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution. SEARCHENGINE = YES -# When the SERVER_BASED_SEARCH tag is enabled the search engine will be -# implemented using a PHP enabled web server instead of at the web client -# using Javascript. Doxygen will generate the search PHP script and index -# file to put on the web server. The advantage of the server -# based approach is that it scales better to large projects and allows -# full text search. The disadvantages are that it is more difficult to setup +# When the SERVER_BASED_SEARCH tag is enabled the search engine will be +# implemented using a PHP enabled web server instead of at the web client +# using Javascript. Doxygen will generate the search PHP script and index +# file to put on the web server. The advantage of the server +# based approach is that it scales better to large projects and allows +# full text search. The disadvantages are that it is more difficult to setup # and does not have live searching capabilities. SERVER_BASED_SEARCH = NO #--------------------------------------------------------------------------- # configuration options related to the LaTeX output #--------------------------------------------------------------------------- -# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will +# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will # generate Latex output. GENERATE_LATEX = NO -# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be # put in front of it. If left blank `latex' will be used as the default path. LATEX_OUTPUT = latex -# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be -# invoked. If left blank `latex' will be used as the default command name. -# Note that when enabling USE_PDFLATEX this option is only used for -# generating bitmaps for formulas in the HTML output, but not in the +# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be +# invoked. If left blank `latex' will be used as the default command name. +# Note that when enabling USE_PDFLATEX this option is only used for +# generating bitmaps for formulas in the HTML output, but not in the # Makefile that is written to the output directory. LATEX_CMD_NAME = latex -# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to -# generate index for LaTeX. If left blank `makeindex' will be used as the +# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to +# generate index for LaTeX. If left blank `makeindex' will be used as the # default command name. MAKEINDEX_CMD_NAME = makeindex -# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact -# LaTeX documents. This may be useful for small projects and may help to +# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact +# LaTeX documents. This may be useful for small projects and may help to # save some trees in general. COMPACT_LATEX = NO -# The PAPER_TYPE tag can be used to set the paper type that is used -# by the printer. Possible values are: a4, letter, legal and +# The PAPER_TYPE tag can be used to set the paper type that is used +# by the printer. Possible values are: a4, letter, legal and # executive. If left blank a4wide will be used. PAPER_TYPE = a4 -# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX +# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX # packages that should be included in the LaTeX output. -EXTRA_PACKAGES = +EXTRA_PACKAGES = -# The LATEX_HEADER tag can be used to specify a personal LaTeX header for -# the generated latex document. The header should contain everything until -# the first chapter. If it is left blank doxygen will generate a +# The LATEX_HEADER tag can be used to specify a personal LaTeX header for +# the generated latex document. The header should contain everything until +# the first chapter. If it is left blank doxygen will generate a # standard header. Notice: only use this tag if you know what you are doing! -LATEX_HEADER = +LATEX_HEADER = -# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for -# the generated latex document. The footer should contain everything after -# the last chapter. If it is left blank doxygen will generate a +# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for +# the generated latex document. The footer should contain everything after +# the last chapter. If it is left blank doxygen will generate a # standard footer. Notice: only use this tag if you know what you are doing! -LATEX_FOOTER = +LATEX_FOOTER = -# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated -# is prepared for conversion to pdf (using ps2pdf). The pdf file will -# contain links (just like the HTML output) instead of page references +# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated +# is prepared for conversion to pdf (using ps2pdf). The pdf file will +# contain links (just like the HTML output) instead of page references # This makes the output suitable for online browsing using a pdf viewer. PDF_HYPERLINKS = YES -# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of -# plain latex in the generated Makefile. Set this option to YES to get a +# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of +# plain latex in the generated Makefile. Set this option to YES to get a # higher quality PDF documentation. USE_PDFLATEX = YES -# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. -# command to the generated LaTeX files. This will instruct LaTeX to keep -# running if errors occur, instead of asking the user for help. +# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. +# command to the generated LaTeX files. This will instruct LaTeX to keep +# running if errors occur, instead of asking the user for help. # This option is also used when generating formulas in HTML. LATEX_BATCHMODE = NO -# If LATEX_HIDE_INDICES is set to YES then doxygen will not -# include the index chapters (such as File Index, Compound Index, etc.) +# If LATEX_HIDE_INDICES is set to YES then doxygen will not +# include the index chapters (such as File Index, Compound Index, etc.) # in the output. LATEX_HIDE_INDICES = NO -# If LATEX_SOURCE_CODE is set to YES then doxygen will include -# source code with syntax highlighting in the LaTeX output. -# Note that which sources are shown also depends on other settings +# If LATEX_SOURCE_CODE is set to YES then doxygen will include +# source code with syntax highlighting in the LaTeX output. +# Note that which sources are shown also depends on other settings # such as SOURCE_BROWSER. LATEX_SOURCE_CODE = NO -# The LATEX_BIB_STYLE tag can be used to specify the style to use for the -# bibliography, e.g. plainnat, or ieeetr. The default style is "plain". See +# The LATEX_BIB_STYLE tag can be used to specify the style to use for the +# bibliography, e.g. plainnat, or ieeetr. The default style is "plain". See # http://en.wikipedia.org/wiki/BibTeX for more info. LATEX_BIB_STYLE = plain #--------------------------------------------------------------------------- # configuration options related to the RTF output #--------------------------------------------------------------------------- -# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output -# The RTF output is optimized for Word 97 and may not look very pretty with +# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output +# The RTF output is optimized for Word 97 and may not look very pretty with # other RTF readers or editors. GENERATE_RTF = NO -# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be # put in front of it. If left blank `rtf' will be used as the default path. RTF_OUTPUT = rtf -# If the COMPACT_RTF tag is set to YES Doxygen generates more compact -# RTF documents. This may be useful for small projects and may help to +# If the COMPACT_RTF tag is set to YES Doxygen generates more compact +# RTF documents. This may be useful for small projects and may help to # save some trees in general. COMPACT_RTF = NO -# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated -# will contain hyperlink fields. The RTF file will -# contain links (just like the HTML output) instead of page references. -# This makes the output suitable for online browsing using WORD or other -# programs which support those fields. +# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated +# will contain hyperlink fields. The RTF file will +# contain links (just like the HTML output) instead of page references. +# This makes the output suitable for online browsing using WORD or other +# programs which support those fields. # Note: wordpad (write) and others do not support links. RTF_HYPERLINKS = NO -# Load style sheet definitions from file. Syntax is similar to doxygen's -# config file, i.e. a series of assignments. You only have to provide +# Load style sheet definitions from file. Syntax is similar to doxygen's +# config file, i.e. a series of assignments. You only have to provide # replacements, missing definitions are set to their default value. -RTF_STYLESHEET_FILE = +RTF_STYLESHEET_FILE = -# Set optional variables used in the generation of an rtf document. +# Set optional variables used in the generation of an rtf document. # Syntax is similar to doxygen's config file. -RTF_EXTENSIONS_FILE = +RTF_EXTENSIONS_FILE = #--------------------------------------------------------------------------- # configuration options related to the man page output #--------------------------------------------------------------------------- -# If the GENERATE_MAN tag is set to YES (the default) Doxygen will +# If the GENERATE_MAN tag is set to YES (the default) Doxygen will # generate man pages GENERATE_MAN = NO -# The MAN_OUTPUT tag is used to specify where the man pages will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# The MAN_OUTPUT tag is used to specify where the man pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be # put in front of it. If left blank `man' will be used as the default path. MAN_OUTPUT = man -# The MAN_EXTENSION tag determines the extension that is added to +# The MAN_EXTENSION tag determines the extension that is added to # the generated man pages (default is the subroutine's section .3) MAN_EXTENSION = .3 -# If the MAN_LINKS tag is set to YES and Doxygen generates man output, -# then it will generate one additional man file for each entity -# documented in the real man page(s). These additional files -# only source the real man page, but without them the man command +# If the MAN_LINKS tag is set to YES and Doxygen generates man output, +# then it will generate one additional man file for each entity +# documented in the real man page(s). These additional files +# only source the real man page, but without them the man command # would be unable to find the correct page. The default is NO. MAN_LINKS = NO #--------------------------------------------------------------------------- # configuration options related to the XML output #--------------------------------------------------------------------------- -# If the GENERATE_XML tag is set to YES Doxygen will -# generate an XML file that captures the structure of +# If the GENERATE_XML tag is set to YES Doxygen will +# generate an XML file that captures the structure of # the code including all documentation. GENERATE_XML = NO -# The XML_OUTPUT tag is used to specify where the XML pages will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# The XML_OUTPUT tag is used to specify where the XML pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be # put in front of it. If left blank `xml' will be used as the default path. XML_OUTPUT = xml -# The XML_SCHEMA tag can be used to specify an XML schema, -# which can be used by a validating XML parser to check the +# The XML_SCHEMA tag can be used to specify an XML schema, +# which can be used by a validating XML parser to check the # syntax of the XML files. -XML_SCHEMA = +XML_SCHEMA = -# The XML_DTD tag can be used to specify an XML DTD, -# which can be used by a validating XML parser to check the +# The XML_DTD tag can be used to specify an XML DTD, +# which can be used by a validating XML parser to check the # syntax of the XML files. -XML_DTD = +XML_DTD = -# If the XML_PROGRAMLISTING tag is set to YES Doxygen will -# dump the program listings (including syntax highlighting -# and cross-referencing information) to the XML output. Note that +# If the XML_PROGRAMLISTING tag is set to YES Doxygen will +# dump the program listings (including syntax highlighting +# and cross-referencing information) to the XML output. Note that # enabling this will significantly increase the size of the XML output. XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- -# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will -# generate an AutoGen Definitions (see autogen.sf.net) file -# that captures the structure of the code including all -# documentation. Note that this feature is still experimental +# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will +# generate an AutoGen Definitions (see autogen.sf.net) file +# that captures the structure of the code including all +# documentation. Note that this feature is still experimental # and incomplete at the moment. GENERATE_AUTOGEN_DEF = NO #--------------------------------------------------------------------------- # configuration options related to the Perl module output #--------------------------------------------------------------------------- -# If the GENERATE_PERLMOD tag is set to YES Doxygen will -# generate a Perl module file that captures the structure of -# the code including all documentation. Note that this -# feature is still experimental and incomplete at the +# If the GENERATE_PERLMOD tag is set to YES Doxygen will +# generate a Perl module file that captures the structure of +# the code including all documentation. Note that this +# feature is still experimental and incomplete at the # moment. GENERATE_PERLMOD = NO -# If the PERLMOD_LATEX tag is set to YES Doxygen will generate -# the necessary Makefile rules, Perl scripts and LaTeX code to be able +# If the PERLMOD_LATEX tag is set to YES Doxygen will generate +# the necessary Makefile rules, Perl scripts and LaTeX code to be able # to generate PDF and DVI output from the Perl module output. PERLMOD_LATEX = NO -# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be -# nicely formatted so it can be parsed by a human reader. This is useful -# if you want to understand what is going on. On the other hand, if this -# tag is set to NO the size of the Perl module output will be much smaller +# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be +# nicely formatted so it can be parsed by a human reader. This is useful +# if you want to understand what is going on. On the other hand, if this +# tag is set to NO the size of the Perl module output will be much smaller # and Perl will parse it just the same. PERLMOD_PRETTY = YES -# The names of the make variables in the generated doxyrules.make file -# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. -# This is useful so different doxyrules.make files included by the same +# The names of the make variables in the generated doxyrules.make file +# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. +# This is useful so different doxyrules.make files included by the same # Makefile don't overwrite each other's variables. -PERLMOD_MAKEVAR_PREFIX = +PERLMOD_MAKEVAR_PREFIX = #--------------------------------------------------------------------------- # Configuration options related to the preprocessor #--------------------------------------------------------------------------- -# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will -# evaluate all C-preprocessor directives found in the sources and include +# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will +# evaluate all C-preprocessor directives found in the sources and include # files. ENABLE_PREPROCESSING = YES -# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro -# names in the source code. If set to NO (the default) only conditional -# compilation will be performed. Macro expansion can be done in a controlled +# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro +# names in the source code. If set to NO (the default) only conditional +# compilation will be performed. Macro expansion can be done in a controlled # way by setting EXPAND_ONLY_PREDEF to YES. MACRO_EXPANSION = NO -# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES -# then the macro expansion is limited to the macros specified with the +# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES +# then the macro expansion is limited to the macros specified with the # PREDEFINED and EXPAND_AS_DEFINED tags. EXPAND_ONLY_PREDEF = NO -# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files +# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files # pointed to by INCLUDE_PATH will be searched when a #include is found. SEARCH_INCLUDES = YES -# The INCLUDE_PATH tag can be used to specify one or more directories that -# contain include files that are not input files but should be processed by +# The INCLUDE_PATH tag can be used to specify one or more directories that +# contain include files that are not input files but should be processed by # the preprocessor. -INCLUDE_PATH = +INCLUDE_PATH = -# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard -# patterns (like *.h and *.hpp) to filter out the header-files in the -# directories. If left blank, the patterns specified with FILE_PATTERNS will +# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard +# patterns (like *.h and *.hpp) to filter out the header-files in the +# directories. If left blank, the patterns specified with FILE_PATTERNS will # be used. -INCLUDE_FILE_PATTERNS = +INCLUDE_FILE_PATTERNS = -# The PREDEFINED tag can be used to specify one or more macro names that -# are defined before the preprocessor is started (similar to the -D option of -# gcc). The argument of the tag is a list of macros of the form: name -# or name=definition (no spaces). If the definition and the = are -# omitted =1 is assumed. To prevent a macro definition from being -# undefined via #undef or recursively expanded use the := operator +# The PREDEFINED tag can be used to specify one or more macro names that +# are defined before the preprocessor is started (similar to the -D option of +# gcc). The argument of the tag is a list of macros of the form: name +# or name=definition (no spaces). If the definition and the = are +# omitted =1 is assumed. To prevent a macro definition from being +# undefined via #undef or recursively expanded use the := operator # instead of the = operator. -PREDEFINED = +PREDEFINED = -# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then -# this tag can be used to specify a list of macro names that should be expanded. -# The macro definition that is found in the sources will be used. -# Use the PREDEFINED tag if you want to use a different macro definition that +# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then +# this tag can be used to specify a list of macro names that should be expanded. +# The macro definition that is found in the sources will be used. +# Use the PREDEFINED tag if you want to use a different macro definition that # overrules the definition found in the source code. -EXPAND_AS_DEFINED = +EXPAND_AS_DEFINED = -# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then -# doxygen's preprocessor will remove all references to function-like macros -# that are alone on a line, have an all uppercase name, and do not end with a +# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then +# doxygen's preprocessor will remove all references to function-like macros +# that are alone on a line, have an all uppercase name, and do not end with a # semicolon, because these will confuse the parser if not removed. SKIP_FUNCTION_MACROS = YES #--------------------------------------------------------------------------- # Configuration::additions related to external references #--------------------------------------------------------------------------- -# The TAGFILES option can be used to specify one or more tagfiles. For each -# tag file the location of the external documentation should be added. The -# format of a tag file without this location is as follows: -# TAGFILES = file1 file2 ... -# Adding location for the tag files is done as follows: -# TAGFILES = file1=loc1 "file2 = loc2" ... -# where "loc1" and "loc2" can be relative or absolute paths -# or URLs. Note that each tag file must have a unique name (where the name does -# NOT include the path). If a tag file is not located in the directory in which +# The TAGFILES option can be used to specify one or more tagfiles. For each +# tag file the location of the external documentation should be added. The +# format of a tag file without this location is as follows: +# TAGFILES = file1 file2 ... +# Adding location for the tag files is done as follows: +# TAGFILES = file1=loc1 "file2 = loc2" ... +# where "loc1" and "loc2" can be relative or absolute paths +# or URLs. Note that each tag file must have a unique name (where the name does +# NOT include the path). If a tag file is not located in the directory in which # doxygen is run, you must also specify the path to the tagfile here. -TAGFILES = +TAGFILES = -# When a file name is specified after GENERATE_TAGFILE, doxygen will create +# When a file name is specified after GENERATE_TAGFILE, doxygen will create # a tag file that is based on the input files it reads. -GENERATE_TAGFILE = +GENERATE_TAGFILE = -# If the ALLEXTERNALS tag is set to YES all external classes will be listed -# in the class index. If set to NO only the inherited external classes +# If the ALLEXTERNALS tag is set to YES all external classes will be listed +# in the class index. If set to NO only the inherited external classes # will be listed. ALLEXTERNALS = NO -# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed -# in the modules index. If set to NO, only the current project's groups will +# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed +# in the modules index. If set to NO, only the current project's groups will # be listed. EXTERNAL_GROUPS = YES -# The PERL_PATH should be the absolute path and name of the perl script +# The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). PERL_PATH = /usr/bin/perl #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- -# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will -# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base -# or super classes. Setting the tag to NO turns the diagrams off. Note that -# this option also works with HAVE_DOT disabled, but it is recommended to +# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will +# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base +# or super classes. Setting the tag to NO turns the diagrams off. Note that +# this option also works with HAVE_DOT disabled, but it is recommended to # install and use dot, since it yields more powerful graphs. CLASS_DIAGRAMS = YES -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see -# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the +# You can define message sequence charts within doxygen comments using the \msc +# command. Doxygen will then run the mscgen tool (see +# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the +# documentation. The MSCGEN_PATH tag allows you to specify the directory where +# the mscgen tool resides. If left empty the tool is assumed to be found in the # default search path. -MSCGEN_PATH = +MSCGEN_PATH = -# If set to YES, the inheritance and collaboration graphs will hide -# inheritance and usage relations if the target is undocumented +# If set to YES, the inheritance and collaboration graphs will hide +# inheritance and usage relations if the target is undocumented # or is not a class. HIDE_UNDOC_RELATIONS = YES -# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is -# available from the path. This tool is part of Graphviz, a graph visualization -# toolkit from AT&T and Lucent Bell Labs. The other options in this section +# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is +# available from the path. This tool is part of Graphviz, a graph visualization +# toolkit from AT&T and Lucent Bell Labs. The other options in this section # have no effect if this option is set to NO (the default) HAVE_DOT = YES -# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is -# allowed to run in parallel. When set to 0 (the default) doxygen will -# base this on the number of processors available in the system. You can set it -# explicitly to a value larger than 0 to get control over the balance +# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is +# allowed to run in parallel. When set to 0 (the default) doxygen will +# base this on the number of processors available in the system. You can set it +# explicitly to a value larger than 0 to get control over the balance # between CPU load and processing speed. DOT_NUM_THREADS = 0 -# By default doxygen will use the Helvetica font for all dot files that -# doxygen generates. When you want a differently looking font you can specify -# the font name using DOT_FONTNAME. You need to make sure dot is able to find -# the font, which can be done by putting it in a standard location or by setting -# the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the +# By default doxygen will use the Helvetica font for all dot files that +# doxygen generates. When you want a differently looking font you can specify +# the font name using DOT_FONTNAME. You need to make sure dot is able to find +# the font, which can be done by putting it in a standard location or by setting +# the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. DOT_FONTNAME = Helvetica -# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. +# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. DOT_FONTSIZE = 10 -# By default doxygen will tell dot to use the Helvetica font. -# If you specify a different font using DOT_FONTNAME you can use DOT_FONTPATH to +# By default doxygen will tell dot to use the Helvetica font. +# If you specify a different font using DOT_FONTNAME you can use DOT_FONTPATH to # set the path where dot can find it. -DOT_FONTPATH = +DOT_FONTPATH = -# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen -# will generate a graph for each documented class showing the direct and -# indirect inheritance relations. Setting this tag to YES will force the +# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for each documented class showing the direct and +# indirect inheritance relations. Setting this tag to YES will force the # CLASS_DIAGRAMS tag to NO. CLASS_GRAPH = YES -# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen -# will generate a graph for each documented class showing the direct and -# indirect implementation dependencies (inheritance, containment, and +# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for each documented class showing the direct and +# indirect implementation dependencies (inheritance, containment, and # class references variables) of the class with other documented classes. COLLABORATION_GRAPH = YES -# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen +# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen # will generate a graph for groups, showing the direct groups dependencies GROUP_GRAPHS = YES -# If the UML_LOOK tag is set to YES doxygen will generate inheritance and -# collaboration diagrams in a style similar to the OMG's Unified Modeling +# If the UML_LOOK tag is set to YES doxygen will generate inheritance and +# collaboration diagrams in a style similar to the OMG's Unified Modeling # Language. UML_LOOK = NO -# If the UML_LOOK tag is enabled, the fields and methods are shown inside -# the class node. If there are many fields or methods and many nodes the -# graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS -# threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# If the UML_LOOK tag is enabled, the fields and methods are shown inside +# the class node. If there are many fields or methods and many nodes the +# graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS +# threshold limits the number of items for each type to make the size more +# managable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 -# If set to YES, the inheritance and collaboration graphs will show the +# If set to YES, the inheritance and collaboration graphs will show the # relations between templates and their instances. TEMPLATE_RELATIONS = NO -# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT -# tags are set to YES then doxygen will generate a graph for each documented -# file showing the direct and indirect include dependencies of the file with +# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT +# tags are set to YES then doxygen will generate a graph for each documented +# file showing the direct and indirect include dependencies of the file with # other documented files. INCLUDE_GRAPH = YES -# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and -# HAVE_DOT tags are set to YES then doxygen will generate a graph for each -# documented header file showing the documented files that directly or +# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and +# HAVE_DOT tags are set to YES then doxygen will generate a graph for each +# documented header file showing the documented files that directly or # indirectly include this file. INCLUDED_BY_GRAPH = YES -# If the CALL_GRAPH and HAVE_DOT options are set to YES then -# doxygen will generate a call dependency graph for every global function -# or class method. Note that enabling this option will significantly increase -# the time of a run. So in most cases it will be better to enable call graphs +# If the CALL_GRAPH and HAVE_DOT options are set to YES then +# doxygen will generate a call dependency graph for every global function +# or class method. Note that enabling this option will significantly increase +# the time of a run. So in most cases it will be better to enable call graphs # for selected functions only using the \callgraph command. CALL_GRAPH = NO -# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then -# doxygen will generate a caller dependency graph for every global function -# or class method. Note that enabling this option will significantly increase -# the time of a run. So in most cases it will be better to enable caller +# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then +# doxygen will generate a caller dependency graph for every global function +# or class method. Note that enabling this option will significantly increase +# the time of a run. So in most cases it will be better to enable caller # graphs for selected functions only using the \callergraph command. CALLER_GRAPH = NO -# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen +# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen # will generate a graphical hierarchy of all classes instead of a textual one. GRAPHICAL_HIERARCHY = YES -# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES -# then doxygen will show the dependencies a directory has on other directories -# in a graphical way. The dependency relations are determined by the #include +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES +# then doxygen will show the dependencies a directory has on other directories +# in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. DIRECTORY_GRAPH = YES -# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. Possible values are svg, png, jpg, or gif. -# If left blank png will be used. If you choose svg you need to set -# HTML_FILE_EXTENSION to xhtml in order to make the SVG files +# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images +# generated by dot. Possible values are svg, png, jpg, or gif. +# If left blank png will be used. If you choose svg you need to set +# HTML_FILE_EXTENSION to xhtml in order to make the SVG files # visible in IE 9+ (other browsers do not have this requirement). DOT_IMAGE_FORMAT = svg -# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to -# enable generation of interactive SVG images that allow zooming and panning. -# Note that this requires a modern browser other than Internet Explorer. -# Tested and working are Firefox, Chrome, Safari, and Opera. For IE 9+ you -# need to set HTML_FILE_EXTENSION to xhtml in order to make the SVG files +# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to +# enable generation of interactive SVG images that allow zooming and panning. +# Note that this requires a modern browser other than Internet Explorer. +# Tested and working are Firefox, Chrome, Safari, and Opera. For IE 9+ you +# need to set HTML_FILE_EXTENSION to xhtml in order to make the SVG files # visible. Older versions of IE do not have SVG support. INTERACTIVE_SVG = YES -# The tag DOT_PATH can be used to specify the path where the dot tool can be +# The tag DOT_PATH can be used to specify the path where the dot tool can be # found. If left blank, it is assumed the dot tool can be found in the path. -DOT_PATH = +DOT_PATH = -# The DOTFILE_DIRS tag can be used to specify one or more directories that -# contain dot files that are included in the documentation (see the +# The DOTFILE_DIRS tag can be used to specify one or more directories that +# contain dot files that are included in the documentation (see the # \dotfile command). -DOTFILE_DIRS = +DOTFILE_DIRS = -# The MSCFILE_DIRS tag can be used to specify one or more directories that -# contain msc files that are included in the documentation (see the +# The MSCFILE_DIRS tag can be used to specify one or more directories that +# contain msc files that are included in the documentation (see the # \mscfile command). -MSCFILE_DIRS = +MSCFILE_DIRS = -# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of -# nodes that will be shown in the graph. If the number of nodes in a graph -# becomes larger than this value, doxygen will truncate the graph, which is -# visualized by representing a node as a red box. Note that doxygen if the -# number of direct children of the root node in a graph is already larger than -# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note +# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of +# nodes that will be shown in the graph. If the number of nodes in a graph +# becomes larger than this value, doxygen will truncate the graph, which is +# visualized by representing a node as a red box. Note that doxygen if the +# number of direct children of the root node in a graph is already larger than +# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note # that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH. DOT_GRAPH_MAX_NODES = 50 -# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the -# graphs generated by dot. A depth value of 3 means that only nodes reachable -# from the root by following a path via at most 3 edges will be shown. Nodes -# that lay further from the root node will be omitted. Note that setting this -# option to 1 or 2 may greatly reduce the computation time needed for large -# code bases. Also note that the size of a graph can be further restricted by +# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the +# graphs generated by dot. A depth value of 3 means that only nodes reachable +# from the root by following a path via at most 3 edges will be shown. Nodes +# that lay further from the root node will be omitted. Note that setting this +# option to 1 or 2 may greatly reduce the computation time needed for large +# code bases. Also note that the size of a graph can be further restricted by # DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction. MAX_DOT_GRAPH_DEPTH = 0 -# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent -# background. This is disabled by default, because dot on Windows does not -# seem to support this out of the box. Warning: Depending on the platform used, -# enabling this option may lead to badly anti-aliased labels on the edges of +# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent +# background. This is disabled by default, because dot on Windows does not +# seem to support this out of the box. Warning: Depending on the platform used, +# enabling this option may lead to badly anti-aliased labels on the edges of # a graph (i.e. they become hard to read). DOT_TRANSPARENT = NO -# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output -# files in one run (i.e. multiple -o and -T options on the command line). This -# makes dot run faster, but since only newer versions of dot (>1.8.10) +# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output +# files in one run (i.e. multiple -o and -T options on the command line). This +# makes dot run faster, but since only newer versions of dot (>1.8.10) # support this, this feature is disabled by default. DOT_MULTI_TARGETS = NO -# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will -# generate a legend page explaining the meaning of the various boxes and +# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will +# generate a legend page explaining the meaning of the various boxes and # arrows in the dot generated graphs. GENERATE_LEGEND = YES -# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will -# remove the intermediate dot files that are used to generate +# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will +# remove the intermediate dot files that are used to generate # the various graphs. DOT_CLEANUP = YES diff --git a/LICENSES/BSD-3-Clause.txt b/LICENSES/BSD-3-Clause.txt new file mode 100644 --- /dev/null +++ b/LICENSES/BSD-3-Clause.txt @@ -0,0 +1,26 @@ +Copyright (c) . All rights reserved. + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +1. Redistributions of source code must retain the above copyright notice, +this list of conditions and the following disclaimer. + +2. Redistributions in binary form must reproduce the above copyright notice, +this list of conditions and the following disclaimer in the documentation +and/or other materials provided with the distribution. + +3. Neither the name of the copyright holder nor the names of its contributors +may be used to endorse or promote products derived from this software without +specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE +LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE +USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. diff --git a/LICENSES/GPL-2.0-only.txt b/LICENSES/GPL-2.0-only.txt new file mode 100644 --- /dev/null +++ b/LICENSES/GPL-2.0-only.txt @@ -0,0 +1,319 @@ +GNU GENERAL PUBLIC LICENSE + +Version 2, June 1991 + +Copyright (C) 1989, 1991 Free Software Foundation, Inc. + +51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA + +Everyone is permitted to copy and distribute verbatim copies of this license +document, but changing it is not allowed. + +Preamble + +The licenses for most software are designed to take away your freedom to share +and change it. By contrast, the GNU General Public License is intended to +guarantee your freedom to share and change free software--to make sure the +software is free for all its users. This General Public License applies to +most of the Free Software Foundation's software and to any other program whose +authors commit to using it. (Some other Free Software Foundation software +is covered by the GNU Lesser General Public License instead.) You can apply +it to your programs, too. + +When we speak of free software, we are referring to freedom, not price. Our +General Public Licenses are designed to make sure that you have the freedom +to distribute copies of free software (and charge for this service if you +wish), that you receive source code or can get it if you want it, that you +can change the software or use pieces of it in new free programs; and that +you know you can do these things. + +To protect your rights, we need to make restrictions that forbid anyone to +deny you these rights or to ask you to surrender the rights. These restrictions +translate to certain responsibilities for you if you distribute copies of +the software, or if you modify it. + +For example, if you distribute copies of such a program, whether gratis or +for a fee, you must give the recipients all the rights that you have. You +must make sure that they, too, receive or can get the source code. And you +must show them these terms so they know their rights. + +We protect your rights with two steps: (1) copyright the software, and (2) +offer you this license which gives you legal permission to copy, distribute +and/or modify the software. + +Also, for each author's protection and ours, we want to make certain that +everyone understands that there is no warranty for this free software. If +the software is modified by someone else and passed on, we want its recipients +to know that what they have is not the original, so that any problems introduced +by others will not reflect on the original authors' reputations. + +Finally, any free program is threatened constantly by software patents. We +wish to avoid the danger that redistributors of a free program will individually +obtain patent licenses, in effect making the program proprietary. To prevent +this, we have made it clear that any patent must be licensed for everyone's +free use or not licensed at all. + +The precise terms and conditions for copying, distribution and modification +follow. + +TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + +0. This License applies to any program or other work which contains a notice +placed by the copyright holder saying it may be distributed under the terms +of this General Public License. The "Program", below, refers to any such program +or work, and a "work based on the Program" means either the Program or any +derivative work under copyright law: that is to say, a work containing the +Program or a portion of it, either verbatim or with modifications and/or translated +into another language. (Hereinafter, translation is included without limitation +in the term "modification".) Each licensee is addressed as "you". + +Activities other than copying, distribution and modification are not covered +by this License; they are outside its scope. The act of running the Program +is not restricted, and the output from the Program is covered only if its +contents constitute a work based on the Program (independent of having been +made by running the Program). Whether that is true depends on what the Program +does. + +1. You may copy and distribute verbatim copies of the Program's source code +as you receive it, in any medium, provided that you conspicuously and appropriately +publish on each copy an appropriate copyright notice and disclaimer of warranty; +keep intact all the notices that refer to this License and to the absence +of any warranty; and give any other recipients of the Program a copy of this +License along with the Program. + +You may charge a fee for the physical act of transferring a copy, and you +may at your option offer warranty protection in exchange for a fee. + +2. You may modify your copy or copies of the Program or any portion of it, +thus forming a work based on the Program, and copy and distribute such modifications +or work under the terms of Section 1 above, provided that you also meet all +of these conditions: + +a) You must cause the modified files to carry prominent notices stating that +you changed the files and the date of any change. + +b) You must cause any work that you distribute or publish, that in whole or +in part contains or is derived from the Program or any part thereof, to be +licensed as a whole at no charge to all third parties under the terms of this +License. + +c) If the modified program normally reads commands interactively when run, +you must cause it, when started running for such interactive use in the most +ordinary way, to print or display an announcement including an appropriate +copyright notice and a notice that there is no warranty (or else, saying that +you provide a warranty) and that users may redistribute the program under +these conditions, and telling the user how to view a copy of this License. +(Exception: if the Program itself is interactive but does not normally print +such an announcement, your work based on the Program is not required to print +an announcement.) + +These requirements apply to the modified work as a whole. If identifiable +sections of that work are not derived from the Program, and can be reasonably +considered independent and separate works in themselves, then this License, +and its terms, do not apply to those sections when you distribute them as +separate works. But when you distribute the same sections as part of a whole +which is a work based on the Program, the distribution of the whole must be +on the terms of this License, whose permissions for other licensees extend +to the entire whole, and thus to each and every part regardless of who wrote +it. + +Thus, it is not the intent of this section to claim rights or contest your +rights to work written entirely by you; rather, the intent is to exercise +the right to control the distribution of derivative or collective works based +on the Program. + +In addition, mere aggregation of another work not based on the Program with +the Program (or with a work based on the Program) on a volume of a storage +or distribution medium does not bring the other work under the scope of this +License. + +3. You may copy and distribute the Program (or a work based on it, under Section +2) in object code or executable form under the terms of Sections 1 and 2 above +provided that you also do one of the following: + +a) Accompany it with the complete corresponding machine-readable source code, +which must be distributed under the terms of Sections 1 and 2 above on a medium +customarily used for software interchange; or, + +b) Accompany it with a written offer, valid for at least three years, to give +any third party, for a charge no more than your cost of physically performing +source distribution, a complete machine-readable copy of the corresponding +source code, to be distributed under the terms of Sections 1 and 2 above on +a medium customarily used for software interchange; or, + +c) Accompany it with the information you received as to the offer to distribute +corresponding source code. (This alternative is allowed only for noncommercial +distribution and only if you received the program in object code or executable +form with such an offer, in accord with Subsection b above.) + +The source code for a work means the preferred form of the work for making +modifications to it. For an executable work, complete source code means all +the source code for all modules it contains, plus any associated interface +definition files, plus the scripts used to control compilation and installation +of the executable. However, as a special exception, the source code distributed +need not include anything that is normally distributed (in either source or +binary form) with the major components (compiler, kernel, and so on) of the +operating system on which the executable runs, unless that component itself +accompanies the executable. + +If distribution of executable or object code is made by offering access to +copy from a designated place, then offering equivalent access to copy the +source code from the same place counts as distribution of the source code, +even though third parties are not compelled to copy the source along with +the object code. + +4. You may not copy, modify, sublicense, or distribute the Program except +as expressly provided under this License. Any attempt otherwise to copy, modify, +sublicense or distribute the Program is void, and will automatically terminate +your rights under this License. However, parties who have received copies, +or rights, from you under this License will not have their licenses terminated +so long as such parties remain in full compliance. + +5. You are not required to accept this License, since you have not signed +it. However, nothing else grants you permission to modify or distribute the +Program or its derivative works. These actions are prohibited by law if you +do not accept this License. Therefore, by modifying or distributing the Program +(or any work based on the Program), you indicate your acceptance of this License +to do so, and all its terms and conditions for copying, distributing or modifying +the Program or works based on it. + +6. Each time you redistribute the Program (or any work based on the Program), +the recipient automatically receives a license from the original licensor +to copy, distribute or modify the Program subject to these terms and conditions. +You may not impose any further restrictions on the recipients' exercise of +the rights granted herein. You are not responsible for enforcing compliance +by third parties to this License. + +7. If, as a consequence of a court judgment or allegation of patent infringement +or for any other reason (not limited to patent issues), conditions are imposed +on you (whether by court order, agreement or otherwise) that contradict the +conditions of this License, they do not excuse you from the conditions of +this License. If you cannot distribute so as to satisfy simultaneously your +obligations under this License and any other pertinent obligations, then as +a consequence you may not distribute the Program at all. For example, if a +patent license would not permit royalty-free redistribution of the Program +by all those who receive copies directly or indirectly through you, then the +only way you could satisfy both it and this License would be to refrain entirely +from distribution of the Program. + +If any portion of this section is held invalid or unenforceable under any +particular circumstance, the balance of the section is intended to apply and +the section as a whole is intended to apply in other circumstances. + +It is not the purpose of this section to induce you to infringe any patents +or other property right claims or to contest validity of any such claims; +this section has the sole purpose of protecting the integrity of the free +software distribution system, which is implemented by public license practices. +Many people have made generous contributions to the wide range of software +distributed through that system in reliance on consistent application of that +system; it is up to the author/donor to decide if he or she is willing to +distribute software through any other system and a licensee cannot impose +that choice. + +This section is intended to make thoroughly clear what is believed to be a +consequence of the rest of this License. + +8. If the distribution and/or use of the Program is restricted in certain +countries either by patents or by copyrighted interfaces, the original copyright +holder who places the Program under this License may add an explicit geographical +distribution limitation excluding those countries, so that distribution is +permitted only in or among countries not thus excluded. In such case, this +License incorporates the limitation as if written in the body of this License. + +9. The Free Software Foundation may publish revised and/or new versions of +the General Public License from time to time. Such new versions will be similar +in spirit to the present version, but may differ in detail to address new +problems or concerns. + +Each version is given a distinguishing version number. If the Program specifies +a version number of this License which applies to it and "any later version", +you have the option of following the terms and conditions either of that version +or of any later version published by the Free Software Foundation. If the +Program does not specify a version number of this License, you may choose +any version ever published by the Free Software Foundation. + +10. If you wish to incorporate parts of the Program into other free programs +whose distribution conditions are different, write to the author to ask for +permission. For software which is copyrighted by the Free Software Foundation, +write to the Free Software Foundation; we sometimes make exceptions for this. +Our decision will be guided by the two goals of preserving the free status +of all derivatives of our free software and of promoting the sharing and reuse +of software generally. + + NO WARRANTY + +11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR +THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE +STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM +"AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, +BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE +OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME +THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. + +12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING +WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE +THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY +GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE +OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA +OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES +OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH +HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. +END OF TERMS AND CONDITIONS + +How to Apply These Terms to Your New Programs + +If you develop a new program, and you want it to be of the greatest possible +use to the public, the best way to achieve this is to make it free software +which everyone can redistribute and change under these terms. + +To do so, attach the following notices to the program. It is safest to attach +them to the start of each source file to most effectively convey the exclusion +of warranty; and each file should have at least the "copyright" line and a +pointer to where the full notice is found. + + + +Copyright (C)< yyyy> + +This program is free software; you can redistribute it and/or modify it under +the terms of the GNU General Public License as published by the Free Software +Foundation; either version 2 of the License, or (at your option) any later +version. + +This program is distributed in the hope that it will be useful, but WITHOUT +ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS +FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. + +You should have received a copy of the GNU General Public License along with +this program; if not, write to the Free Software Foundation, Inc., 51 Franklin +Street, Fifth Floor, Boston, MA 02110-1301, USA. + +Also add information on how to contact you by electronic and paper mail. + +If the program is interactive, make it output a short notice like this when +it starts in an interactive mode: + +Gnomovision version 69, Copyright (C) year name of author Gnomovision comes +with ABSOLUTELY NO WARRANTY; for details type `show w'. This is free software, +and you are welcome to redistribute it under certain conditions; type `show +c' for details. + +The hypothetical commands `show w' and `show c' should show the appropriate +parts of the General Public License. Of course, the commands you use may be +called something other than `show w' and `show c'; they could even be mouse-clicks +or menu items--whatever suits your program. + +You should also get your employer (if you work as a programmer) or your school, +if any, to sign a "copyright disclaimer" for the program, if necessary. Here +is a sample; alter the names: + +Yoyodyne, Inc., hereby disclaims all copyright interest in the program `Gnomovision' +(which makes passes at compilers) written by James Hacker. + +, 1 April 1989 Ty Coon, President of Vice This General +Public License does not permit incorporating your program into proprietary +programs. If your program is a subroutine library, you may consider it more +useful to permit linking proprietary applications with the library. If this +is what you want to do, use the GNU Lesser General Public License instead +of this License. diff --git a/LICENSES/GPL-3.0-only.txt b/LICENSES/GPL-3.0-only.txt new file mode 100644 --- /dev/null +++ b/LICENSES/GPL-3.0-only.txt @@ -0,0 +1,625 @@ +GNU GENERAL PUBLIC LICENSE + +Version 3, 29 June 2007 + +Copyright © 2007 Free Software Foundation, Inc. + +Everyone is permitted to copy and distribute verbatim copies of this license +document, but changing it is not allowed. + +Preamble + +The GNU General Public License is a free, copyleft license for software and +other kinds of works. + +The licenses for most software and other practical works are designed to take +away your freedom to share and change the works. By contrast, the GNU General +Public License is intended to guarantee your freedom to share and change all +versions of a program--to make sure it remains free software for all its users. +We, the Free Software Foundation, use the GNU General Public License for most +of our software; it applies also to any other work released this way by its +authors. You can apply it to your programs, too. + +When we speak of free software, we are referring to freedom, not price. Our +General Public Licenses are designed to make sure that you have the freedom +to distribute copies of free software (and charge for them if you wish), that +you receive source code or can get it if you want it, that you can change +the software or use pieces of it in new free programs, and that you know you +can do these things. + +To protect your rights, we need to prevent others from denying you these rights +or asking you to surrender the rights. Therefore, you have certain responsibilities +if you distribute copies of the software, or if you modify it: responsibilities +to respect the freedom of others. + +For example, if you distribute copies of such a program, whether gratis or +for a fee, you must pass on to the recipients the same freedoms that you received. +You must make sure that they, too, receive or can get the source code. And +you must show them these terms so they know their rights. + +Developers that use the GNU GPL protect your rights with two steps: (1) assert +copyright on the software, and (2) offer you this License giving you legal +permission to copy, distribute and/or modify it. + +For the developers' and authors' protection, the GPL clearly explains that +there is no warranty for this free software. For both users' and authors' +sake, the GPL requires that modified versions be marked as changed, so that +their problems will not be attributed erroneously to authors of previous versions. + +Some devices are designed to deny users access to install or run modified +versions of the software inside them, although the manufacturer can do so. +This is fundamentally incompatible with the aim of protecting users' freedom +to change the software. The systematic pattern of such abuse occurs in the +area of products for individuals to use, which is precisely where it is most +unacceptable. Therefore, we have designed this version of the GPL to prohibit +the practice for those products. If such problems arise substantially in other +domains, we stand ready to extend this provision to those domains in future +versions of the GPL, as needed to protect the freedom of users. + +Finally, every program is threatened constantly by software patents. States +should not allow patents to restrict development and use of software on general-purpose +computers, but in those that do, we wish to avoid the special danger that +patents applied to a free program could make it effectively proprietary. To +prevent this, the GPL assures that patents cannot be used to render the program +non-free. + +The precise terms and conditions for copying, distribution and modification +follow. + +TERMS AND CONDITIONS + + 0. Definitions. + + "This License" refers to version 3 of the GNU General Public License. + +"Copyright" also means copyright-like laws that apply to other kinds of works, +such as semiconductor masks. + +"The Program" refers to any copyrightable work licensed under this License. +Each licensee is addressed as "you". "Licensees" and "recipients" may be individuals +or organizations. + +To "modify" a work means to copy from or adapt all or part of the work in +a fashion requiring copyright permission, other than the making of an exact +copy. The resulting work is called a "modified version" of the earlier work +or a work "based on" the earlier work. + +A "covered work" means either the unmodified Program or a work based on the +Program. + +To "propagate" a work means to do anything with it that, without permission, +would make you directly or secondarily liable for infringement under applicable +copyright law, except executing it on a computer or modifying a private copy. +Propagation includes copying, distribution (with or without modification), +making available to the public, and in some countries other activities as +well. + +To "convey" a work means any kind of propagation that enables other parties +to make or receive copies. Mere interaction with a user through a computer +network, with no transfer of a copy, is not conveying. + +An interactive user interface displays "Appropriate Legal Notices" to the +extent that it includes a convenient and prominently visible feature that +(1) displays an appropriate copyright notice, and (2) tells the user that +there is no warranty for the work (except to the extent that warranties are +provided), that licensees may convey the work under this License, and how +to view a copy of this License. If the interface presents a list of user commands +or options, such as a menu, a prominent item in the list meets this criterion. + + 1. Source Code. + +The "source code" for a work means the preferred form of the work for making +modifications to it. "Object code" means any non-source form of a work. + +A "Standard Interface" means an interface that either is an official standard +defined by a recognized standards body, or, in the case of interfaces specified +for a particular programming language, one that is widely used among developers +working in that language. + +The "System Libraries" of an executable work include anything, other than +the work as a whole, that (a) is included in the normal form of packaging +a Major Component, but which is not part of that Major Component, and (b) +serves only to enable use of the work with that Major Component, or to implement +a Standard Interface for which an implementation is available to the public +in source code form. A "Major Component", in this context, means a major essential +component (kernel, window system, and so on) of the specific operating system +(if any) on which the executable work runs, or a compiler used to produce +the work, or an object code interpreter used to run it. + +The "Corresponding Source" for a work in object code form means all the source +code needed to generate, install, and (for an executable work) run the object +code and to modify the work, including scripts to control those activities. +However, it does not include the work's System Libraries, or general-purpose +tools or generally available free programs which are used unmodified in performing +those activities but which are not part of the work. For example, Corresponding +Source includes interface definition files associated with source files for +the work, and the source code for shared libraries and dynamically linked +subprograms that the work is specifically designed to require, such as by +intimate data communication or control flow between those subprograms and +other parts of the work. + +The Corresponding Source need not include anything that users can regenerate +automatically from other parts of the Corresponding Source. + + The Corresponding Source for a work in source code form is that same work. + + 2. Basic Permissions. + +All rights granted under this License are granted for the term of copyright +on the Program, and are irrevocable provided the stated conditions are met. +This License explicitly affirms your unlimited permission to run the unmodified +Program. The output from running a covered work is covered by this License +only if the output, given its content, constitutes a covered work. This License +acknowledges your rights of fair use or other equivalent, as provided by copyright +law. + +You may make, run and propagate covered works that you do not convey, without +conditions so long as your license otherwise remains in force. You may convey +covered works to others for the sole purpose of having them make modifications +exclusively for you, or provide you with facilities for running those works, +provided that you comply with the terms of this License in conveying all material +for which you do not control copyright. Those thus making or running the covered +works for you must do so exclusively on your behalf, under your direction +and control, on terms that prohibit them from making any copies of your copyrighted +material outside their relationship with you. + +Conveying under any other circumstances is permitted solely under the conditions +stated below. Sublicensing is not allowed; section 10 makes it unnecessary. + + 3. Protecting Users' Legal Rights From Anti-Circumvention Law. + +No covered work shall be deemed part of an effective technological measure +under any applicable law fulfilling obligations under article 11 of the WIPO +copyright treaty adopted on 20 December 1996, or similar laws prohibiting +or restricting circumvention of such measures. + +When you convey a covered work, you waive any legal power to forbid circumvention +of technological measures to the extent such circumvention is effected by +exercising rights under this License with respect to the covered work, and +you disclaim any intention to limit operation or modification of the work +as a means of enforcing, against the work's users, your or third parties' +legal rights to forbid circumvention of technological measures. + + 4. Conveying Verbatim Copies. + +You may convey verbatim copies of the Program's source code as you receive +it, in any medium, provided that you conspicuously and appropriately publish +on each copy an appropriate copyright notice; keep intact all notices stating +that this License and any non-permissive terms added in accord with section +7 apply to the code; keep intact all notices of the absence of any warranty; +and give all recipients a copy of this License along with the Program. + +You may charge any price or no price for each copy that you convey, and you +may offer support or warranty protection for a fee. + + 5. Conveying Modified Source Versions. + +You may convey a work based on the Program, or the modifications to produce +it from the Program, in the form of source code under the terms of section +4, provided that you also meet all of these conditions: + +a) The work must carry prominent notices stating that you modified it, and +giving a relevant date. + +b) The work must carry prominent notices stating that it is released under +this License and any conditions added under section 7. This requirement modifies +the requirement in section 4 to "keep intact all notices". + +c) You must license the entire work, as a whole, under this License to anyone +who comes into possession of a copy. This License will therefore apply, along +with any applicable section 7 additional terms, to the whole of the work, +and all its parts, regardless of how they are packaged. This License gives +no permission to license the work in any other way, but it does not invalidate +such permission if you have separately received it. + +d) If the work has interactive user interfaces, each must display Appropriate +Legal Notices; however, if the Program has interactive interfaces that do +not display Appropriate Legal Notices, your work need not make them do so. + +A compilation of a covered work with other separate and independent works, +which are not by their nature extensions of the covered work, and which are +not combined with it such as to form a larger program, in or on a volume of +a storage or distribution medium, is called an "aggregate" if the compilation +and its resulting copyright are not used to limit the access or legal rights +of the compilation's users beyond what the individual works permit. Inclusion +of a covered work in an aggregate does not cause this License to apply to +the other parts of the aggregate. + + 6. Conveying Non-Source Forms. + +You may convey a covered work in object code form under the terms of sections +4 and 5, provided that you also convey the machine-readable Corresponding +Source under the terms of this License, in one of these ways: + +a) Convey the object code in, or embodied in, a physical product (including +a physical distribution medium), accompanied by the Corresponding Source fixed +on a durable physical medium customarily used for software interchange. + +b) Convey the object code in, or embodied in, a physical product (including +a physical distribution medium), accompanied by a written offer, valid for +at least three years and valid for as long as you offer spare parts or customer +support for that product model, to give anyone who possesses the object code +either (1) a copy of the Corresponding Source for all the software in the +product that is covered by this License, on a durable physical medium customarily +used for software interchange, for a price no more than your reasonable cost +of physically performing this conveying of source, or (2) access to copy the +Corresponding Source from a network server at no charge. + +c) Convey individual copies of the object code with a copy of the written +offer to provide the Corresponding Source. This alternative is allowed only +occasionally and noncommercially, and only if you received the object code +with such an offer, in accord with subsection 6b. + +d) Convey the object code by offering access from a designated place (gratis +or for a charge), and offer equivalent access to the Corresponding Source +in the same way through the same place at no further charge. You need not +require recipients to copy the Corresponding Source along with the object +code. If the place to copy the object code is a network server, the Corresponding +Source may be on a different server (operated by you or a third party) that +supports equivalent copying facilities, provided you maintain clear directions +next to the object code saying where to find the Corresponding Source. Regardless +of what server hosts the Corresponding Source, you remain obligated to ensure +that it is available for as long as needed to satisfy these requirements. + +e) Convey the object code using peer-to-peer transmission, provided you inform +other peers where the object code and Corresponding Source of the work are +being offered to the general public at no charge under subsection 6d. + +A separable portion of the object code, whose source code is excluded from +the Corresponding Source as a System Library, need not be included in conveying +the object code work. + +A "User Product" is either (1) a "consumer product", which means any tangible +personal property which is normally used for personal, family, or household +purposes, or (2) anything designed or sold for incorporation into a dwelling. +In determining whether a product is a consumer product, doubtful cases shall +be resolved in favor of coverage. For a particular product received by a particular +user, "normally used" refers to a typical or common use of that class of product, +regardless of the status of the particular user or of the way in which the +particular user actually uses, or expects or is expected to use, the product. +A product is a consumer product regardless of whether the product has substantial +commercial, industrial or non-consumer uses, unless such uses represent the +only significant mode of use of the product. + +"Installation Information" for a User Product means any methods, procedures, +authorization keys, or other information required to install and execute modified +versions of a covered work in that User Product from a modified version of +its Corresponding Source. The information must suffice to ensure that the +continued functioning of the modified object code is in no case prevented +or interfered with solely because modification has been made. + +If you convey an object code work under this section in, or with, or specifically +for use in, a User Product, and the conveying occurs as part of a transaction +in which the right of possession and use of the User Product is transferred +to the recipient in perpetuity or for a fixed term (regardless of how the +transaction is characterized), the Corresponding Source conveyed under this +section must be accompanied by the Installation Information. But this requirement +does not apply if neither you nor any third party retains the ability to install +modified object code on the User Product (for example, the work has been installed +in ROM). + +The requirement to provide Installation Information does not include a requirement +to continue to provide support service, warranty, or updates for a work that +has been modified or installed by the recipient, or for the User Product in +which it has been modified or installed. Access to a network may be denied +when the modification itself materially and adversely affects the operation +of the network or violates the rules and protocols for communication across +the network. + +Corresponding Source conveyed, and Installation Information provided, in accord +with this section must be in a format that is publicly documented (and with +an implementation available to the public in source code form), and must require +no special password or key for unpacking, reading or copying. + + 7. Additional Terms. + +"Additional permissions" are terms that supplement the terms of this License +by making exceptions from one or more of its conditions. Additional permissions +that are applicable to the entire Program shall be treated as though they +were included in this License, to the extent that they are valid under applicable +law. If additional permissions apply only to part of the Program, that part +may be used separately under those permissions, but the entire Program remains +governed by this License without regard to the additional permissions. + +When you convey a copy of a covered work, you may at your option remove any +additional permissions from that copy, or from any part of it. (Additional +permissions may be written to require their own removal in certain cases when +you modify the work.) You may place additional permissions on material, added +by you to a covered work, for which you have or can give appropriate copyright +permission. + +Notwithstanding any other provision of this License, for material you add +to a covered work, you may (if authorized by the copyright holders of that +material) supplement the terms of this License with terms: + +a) Disclaiming warranty or limiting liability differently from the terms of +sections 15 and 16 of this License; or + +b) Requiring preservation of specified reasonable legal notices or author +attributions in that material or in the Appropriate Legal Notices displayed +by works containing it; or + +c) Prohibiting misrepresentation of the origin of that material, or requiring +that modified versions of such material be marked in reasonable ways as different +from the original version; or + +d) Limiting the use for publicity purposes of names of licensors or authors +of the material; or + +e) Declining to grant rights under trademark law for use of some trade names, +trademarks, or service marks; or + +f) Requiring indemnification of licensors and authors of that material by +anyone who conveys the material (or modified versions of it) with contractual +assumptions of liability to the recipient, for any liability that these contractual +assumptions directly impose on those licensors and authors. + +All other non-permissive additional terms are considered "further restrictions" +within the meaning of section 10. If the Program as you received it, or any +part of it, contains a notice stating that it is governed by this License +along with a term that is a further restriction, you may remove that term. +If a license document contains a further restriction but permits relicensing +or conveying under this License, you may add to a covered work material governed +by the terms of that license document, provided that the further restriction +does not survive such relicensing or conveying. + +If you add terms to a covered work in accord with this section, you must place, +in the relevant source files, a statement of the additional terms that apply +to those files, or a notice indicating where to find the applicable terms. + +Additional terms, permissive or non-permissive, may be stated in the form +of a separately written license, or stated as exceptions; the above requirements +apply either way. + + 8. Termination. + +You may not propagate or modify a covered work except as expressly provided +under this License. Any attempt otherwise to propagate or modify it is void, +and will automatically terminate your rights under this License (including +any patent licenses granted under the third paragraph of section 11). + +However, if you cease all violation of this License, then your license from +a particular copyright holder is reinstated (a) provisionally, unless and +until the copyright holder explicitly and finally terminates your license, +and (b) permanently, if the copyright holder fails to notify you of the violation +by some reasonable means prior to 60 days after the cessation. + +Moreover, your license from a particular copyright holder is reinstated permanently +if the copyright holder notifies you of the violation by some reasonable means, +this is the first time you have received notice of violation of this License +(for any work) from that copyright holder, and you cure the violation prior +to 30 days after your receipt of the notice. + +Termination of your rights under this section does not terminate the licenses +of parties who have received copies or rights from you under this License. +If your rights have been terminated and not permanently reinstated, you do +not qualify to receive new licenses for the same material under section 10. + + 9. Acceptance Not Required for Having Copies. + +You are not required to accept this License in order to receive or run a copy +of the Program. Ancillary propagation of a covered work occurring solely as +a consequence of using peer-to-peer transmission to receive a copy likewise +does not require acceptance. However, nothing other than this License grants +you permission to propagate or modify any covered work. These actions infringe +copyright if you do not accept this License. Therefore, by modifying or propagating +a covered work, you indicate your acceptance of this License to do so. + + 10. Automatic Licensing of Downstream Recipients. + +Each time you convey a covered work, the recipient automatically receives +a license from the original licensors, to run, modify and propagate that work, +subject to this License. You are not responsible for enforcing compliance +by third parties with this License. + +An "entity transaction" is a transaction transferring control of an organization, +or substantially all assets of one, or subdividing an organization, or merging +organizations. If propagation of a covered work results from an entity transaction, +each party to that transaction who receives a copy of the work also receives +whatever licenses to the work the party's predecessor in interest had or could +give under the previous paragraph, plus a right to possession of the Corresponding +Source of the work from the predecessor in interest, if the predecessor has +it or can get it with reasonable efforts. + +You may not impose any further restrictions on the exercise of the rights +granted or affirmed under this License. For example, you may not impose a +license fee, royalty, or other charge for exercise of rights granted under +this License, and you may not initiate litigation (including a cross-claim +or counterclaim in a lawsuit) alleging that any patent claim is infringed +by making, using, selling, offering for sale, or importing the Program or +any portion of it. + + 11. Patents. + +A "contributor" is a copyright holder who authorizes use under this License +of the Program or a work on which the Program is based. The work thus licensed +is called the contributor's "contributor version". + +A contributor's "essential patent claims" are all patent claims owned or controlled +by the contributor, whether already acquired or hereafter acquired, that would +be infringed by some manner, permitted by this License, of making, using, +or selling its contributor version, but do not include claims that would be +infringed only as a consequence of further modification of the contributor +version. For purposes of this definition, "control" includes the right to +grant patent sublicenses in a manner consistent with the requirements of this +License. + +Each contributor grants you a non-exclusive, worldwide, royalty-free patent +license under the contributor's essential patent claims, to make, use, sell, +offer for sale, import and otherwise run, modify and propagate the contents +of its contributor version. + +In the following three paragraphs, a "patent license" is any express agreement +or commitment, however denominated, not to enforce a patent (such as an express +permission to practice a patent or covenant not to sue for patent infringement). +To "grant" such a patent license to a party means to make such an agreement +or commitment not to enforce a patent against the party. + +If you convey a covered work, knowingly relying on a patent license, and the +Corresponding Source of the work is not available for anyone to copy, free +of charge and under the terms of this License, through a publicly available +network server or other readily accessible means, then you must either (1) +cause the Corresponding Source to be so available, or (2) arrange to deprive +yourself of the benefit of the patent license for this particular work, or +(3) arrange, in a manner consistent with the requirements of this License, +to extend the patent license to downstream recipients. "Knowingly relying" +means you have actual knowledge that, but for the patent license, your conveying +the covered work in a country, or your recipient's use of the covered work +in a country, would infringe one or more identifiable patents in that country +that you have reason to believe are valid. + +If, pursuant to or in connection with a single transaction or arrangement, +you convey, or propagate by procuring conveyance of, a covered work, and grant +a patent license to some of the parties receiving the covered work authorizing +them to use, propagate, modify or convey a specific copy of the covered work, +then the patent license you grant is automatically extended to all recipients +of the covered work and works based on it. + +A patent license is "discriminatory" if it does not include within the scope +of its coverage, prohibits the exercise of, or is conditioned on the non-exercise +of one or more of the rights that are specifically granted under this License. +You may not convey a covered work if you are a party to an arrangement with +a third party that is in the business of distributing software, under which +you make payment to the third party based on the extent of your activity of +conveying the work, and under which the third party grants, to any of the +parties who would receive the covered work from you, a discriminatory patent +license (a) in connection with copies of the covered work conveyed by you +(or copies made from those copies), or (b) primarily for and in connection +with specific products or compilations that contain the covered work, unless +you entered into that arrangement, or that patent license was granted, prior +to 28 March 2007. + +Nothing in this License shall be construed as excluding or limiting any implied +license or other defenses to infringement that may otherwise be available +to you under applicable patent law. + + 12. No Surrender of Others' Freedom. + +If conditions are imposed on you (whether by court order, agreement or otherwise) +that contradict the conditions of this License, they do not excuse you from +the conditions of this License. If you cannot convey a covered work so as +to satisfy simultaneously your obligations under this License and any other +pertinent obligations, then as a consequence you may not convey it at all. +For example, if you agree to terms that obligate you to collect a royalty +for further conveying from those to whom you convey the Program, the only +way you could satisfy both those terms and this License would be to refrain +entirely from conveying the Program. + + 13. Use with the GNU Affero General Public License. + +Notwithstanding any other provision of this License, you have permission to +link or combine any covered work with a work licensed under version 3 of the +GNU Affero General Public License into a single combined work, and to convey +the resulting work. The terms of this License will continue to apply to the +part which is the covered work, but the special requirements of the GNU Affero +General Public License, section 13, concerning interaction through a network +will apply to the combination as such. + + 14. Revised Versions of this License. + +The Free Software Foundation may publish revised and/or new versions of the +GNU General Public License from time to time. Such new versions will be similar +in spirit to the present version, but may differ in detail to address new +problems or concerns. + +Each version is given a distinguishing version number. If the Program specifies +that a certain numbered version of the GNU General Public License "or any +later version" applies to it, you have the option of following the terms and +conditions either of that numbered version or of any later version published +by the Free Software Foundation. If the Program does not specify a version +number of the GNU General Public License, you may choose any version ever +published by the Free Software Foundation. + +If the Program specifies that a proxy can decide which future versions of +the GNU General Public License can be used, that proxy's public statement +of acceptance of a version permanently authorizes you to choose that version +for the Program. + +Later license versions may give you additional or different permissions. However, +no additional obligations are imposed on any author or copyright holder as +a result of your choosing to follow a later version. + + 15. Disclaimer of Warranty. + +THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE +LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR +OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER +EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES +OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS +TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM +PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR +CORRECTION. + + 16. Limitation of Liability. + +IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL +ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS THE PROGRAM +AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, +INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO +USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED +INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE +PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER +PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. + + 17. Interpretation of Sections 15 and 16. + +If the disclaimer of warranty and limitation of liability provided above cannot +be given local legal effect according to their terms, reviewing courts shall +apply local law that most closely approximates an absolute waiver of all civil +liability in connection with the Program, unless a warranty or assumption +of liability accompanies a copy of the Program in return for a fee. END OF +TERMS AND CONDITIONS + +How to Apply These Terms to Your New Programs + +If you develop a new program, and you want it to be of the greatest possible +use to the public, the best way to achieve this is to make it free software +which everyone can redistribute and change under these terms. + +To do so, attach the following notices to the program. It is safest to attach +them to the start of each source file to most effectively state the exclusion +of warranty; and each file should have at least the "copyright" line and a +pointer to where the full notice is found. + + + +Copyright (C) + +This program is free software: you can redistribute it and/or modify it under +the terms of the GNU General Public License as published by the Free Software +Foundation, either version 3 of the License, or (at your option) any later +version. + +This program is distributed in the hope that it will be useful, but WITHOUT +ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS +FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. + +You should have received a copy of the GNU General Public License along with +this program. If not, see . + +Also add information on how to contact you by electronic and paper mail. + +If the program does terminal interaction, make it output a short notice like +this when it starts in an interactive mode: + + Copyright (C) + +This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'. + +This is free software, and you are welcome to redistribute it under certain +conditions; type `show c' for details. + +The hypothetical commands `show w' and `show c' should show the appropriate +parts of the General Public License. Of course, your program's commands might +be different; for a GUI interface, you would use an "about box". + +You should also get your employer (if you work as a programmer) or school, +if any, to sign a "copyright disclaimer" for the program, if necessary. For +more information on this, and how to apply and follow the GNU GPL, see . + +The GNU General Public License does not permit incorporating your program +into proprietary programs. If your program is a subroutine library, you may +consider it more useful to permit linking proprietary applications with the +library. If this is what you want to do, use the GNU Lesser General Public +License instead of this License. But first, please read . diff --git a/LICENSES/LGPL-2.1-only.txt b/LICENSES/LGPL-2.1-only.txt new file mode 100644 --- /dev/null +++ b/LICENSES/LGPL-2.1-only.txt @@ -0,0 +1,467 @@ +GNU LESSER GENERAL PUBLIC LICENSE + +Version 2.1, February 1999 + +Copyright (C) 1991, 1999 Free Software Foundation, Inc. + +51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + +Everyone is permitted to copy and distribute verbatim copies of this license +document, but changing it is not allowed. + +[This is the first released version of the Lesser GPL. It also counts as the +successor of the GNU Library Public License, version 2, hence the version +number 2.1.] + +Preamble + +The licenses for most software are designed to take away your freedom to share +and change it. By contrast, the GNU General Public Licenses are intended to +guarantee your freedom to share and change free software--to make sure the +software is free for all its users. + +This license, the Lesser General Public License, applies to some specially +designated software packages--typically libraries--of the Free Software Foundation +and other authors who decide to use it. You can use it too, but we suggest +you first think carefully about whether this license or the ordinary General +Public License is the better strategy to use in any particular case, based +on the explanations below. + +When we speak of free software, we are referring to freedom of use, not price. +Our General Public Licenses are designed to make sure that you have the freedom +to distribute copies of free software (and charge for this service if you +wish); that you receive source code or can get it if you want it; that you +can change the software and use pieces of it in new free programs; and that +you are informed that you can do these things. + +To protect your rights, we need to make restrictions that forbid distributors +to deny you these rights or to ask you to surrender these rights. These restrictions +translate to certain responsibilities for you if you distribute copies of +the library or if you modify it. + +For example, if you distribute copies of the library, whether gratis or for +a fee, you must give the recipients all the rights that we gave you. You must +make sure that they, too, receive or can get the source code. If you link +other code with the library, you must provide complete object files to the +recipients, so that they can relink them with the library after making changes +to the library and recompiling it. And you must show them these terms so they +know their rights. + +We protect your rights with a two-step method: (1) we copyright the library, +and (2) we offer you this license, which gives you legal permission to copy, +distribute and/or modify the library. + +To protect each distributor, we want to make it very clear that there is no +warranty for the free library. Also, if the library is modified by someone +else and passed on, the recipients should know that what they have is not +the original version, so that the original author's reputation will not be +affected by problems that might be introduced by others. + +Finally, software patents pose a constant threat to the existence of any free +program. We wish to make sure that a company cannot effectively restrict the +users of a free program by obtaining a restrictive license from a patent holder. +Therefore, we insist that any patent license obtained for a version of the +library must be consistent with the full freedom of use specified in this +license. + +Most GNU software, including some libraries, is covered by the ordinary GNU +General Public License. This license, the GNU Lesser General Public License, +applies to certain designated libraries, and is quite different from the ordinary +General Public License. We use this license for certain libraries in order +to permit linking those libraries into non-free programs. + +When a program is linked with a library, whether statically or using a shared +library, the combination of the two is legally speaking a combined work, a +derivative of the original library. The ordinary General Public License therefore +permits such linking only if the entire combination fits its criteria of freedom. +The Lesser General Public License permits more lax criteria for linking other +code with the library. + +We call this license the "Lesser" General Public License because it does Less +to protect the user's freedom than the ordinary General Public License. It +also provides other free software developers Less of an advantage over competing +non-free programs. These disadvantages are the reason we use the ordinary +General Public License for many libraries. However, the Lesser license provides +advantages in certain special circumstances. + +For example, on rare occasions, there may be a special need to encourage the +widest possible use of a certain library, so that it becomes a de-facto standard. +To achieve this, non-free programs must be allowed to use the library. A more +frequent case is that a free library does the same job as widely used non-free +libraries. In this case, there is little to gain by limiting the free library +to free software only, so we use the Lesser General Public License. + +In other cases, permission to use a particular library in non-free programs +enables a greater number of people to use a large body of free software. For +example, permission to use the GNU C Library in non-free programs enables +many more people to use the whole GNU operating system, as well as its variant, +the GNU/Linux operating system. + +Although the Lesser General Public License is Less protective of the users' +freedom, it does ensure that the user of a program that is linked with the +Library has the freedom and the wherewithal to run that program using a modified +version of the Library. + +The precise terms and conditions for copying, distribution and modification +follow. Pay close attention to the difference between a "work based on the +library" and a "work that uses the library". The former contains code derived +from the library, whereas the latter must be combined with the library in +order to run. + +TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + +0. This License Agreement applies to any software library or other program +which contains a notice placed by the copyright holder or other authorized +party saying it may be distributed under the terms of this Lesser General +Public License (also called "this License"). Each licensee is addressed as +"you". + +A "library" means a collection of software functions and/or data prepared +so as to be conveniently linked with application programs (which use some +of those functions and data) to form executables. + +The "Library", below, refers to any such software library or work which has +been distributed under these terms. A "work based on the Library" means either +the Library or any derivative work under copyright law: that is to say, a +work containing the Library or a portion of it, either verbatim or with modifications +and/or translated straightforwardly into another language. (Hereinafter, translation +is included without limitation in the term "modification".) + +"Source code" for a work means the preferred form of the work for making modifications +to it. For a library, complete source code means all the source code for all +modules it contains, plus any associated interface definition files, plus +the scripts used to control compilation and installation of the library. + +Activities other than copying, distribution and modification are not covered +by this License; they are outside its scope. The act of running a program +using the Library is not restricted, and output from such a program is covered +only if its contents constitute a work based on the Library (independent of +the use of the Library in a tool for writing it). Whether that is true depends +on what the Library does and what the program that uses the Library does. + +1. You may copy and distribute verbatim copies of the Library's complete source +code as you receive it, in any medium, provided that you conspicuously and +appropriately publish on each copy an appropriate copyright notice and disclaimer +of warranty; keep intact all the notices that refer to this License and to +the absence of any warranty; and distribute a copy of this License along with +the Library. + +You may charge a fee for the physical act of transferring a copy, and you +may at your option offer warranty protection in exchange for a fee. + +2. You may modify your copy or copies of the Library or any portion of it, +thus forming a work based on the Library, and copy and distribute such modifications +or work under the terms of Section 1 above, provided that you also meet all +of these conditions: + + a) The modified work must itself be a software library. + +b) You must cause the files modified to carry prominent notices stating that +you changed the files and the date of any change. + +c) You must cause the whole of the work to be licensed at no charge to all +third parties under the terms of this License. + +d) If a facility in the modified Library refers to a function or a table of +data to be supplied by an application program that uses the facility, other +than as an argument passed when the facility is invoked, then you must make +a good faith effort to ensure that, in the event an application does not supply +such function or table, the facility still operates, and performs whatever +part of its purpose remains meaningful. + +(For example, a function in a library to compute square roots has a purpose +that is entirely well-defined independent of the application. Therefore, Subsection +2d requires that any application-supplied function or table used by this function +must be optional: if the application does not supply it, the square root function +must still compute square roots.) + +These requirements apply to the modified work as a whole. If identifiable +sections of that work are not derived from the Library, and can be reasonably +considered independent and separate works in themselves, then this License, +and its terms, do not apply to those sections when you distribute them as +separate works. But when you distribute the same sections as part of a whole +which is a work based on the Library, the distribution of the whole must be +on the terms of this License, whose permissions for other licensees extend +to the entire whole, and thus to each and every part regardless of who wrote +it. + +Thus, it is not the intent of this section to claim rights or contest your +rights to work written entirely by you; rather, the intent is to exercise +the right to control the distribution of derivative or collective works based +on the Library. + +In addition, mere aggregation of another work not based on the Library with +the Library (or with a work based on the Library) on a volume of a storage +or distribution medium does not bring the other work under the scope of this +License. + +3. You may opt to apply the terms of the ordinary GNU General Public License +instead of this License to a given copy of the Library. To do this, you must +alter all the notices that refer to this License, so that they refer to the +ordinary GNU General Public License, version 2, instead of to this License. +(If a newer version than version 2 of the ordinary GNU General Public License +has appeared, then you can specify that version instead if you wish.) Do not +make any other change in these notices. + +Once this change is made in a given copy, it is irreversible for that copy, +so the ordinary GNU General Public License applies to all subsequent copies +and derivative works made from that copy. + +This option is useful when you wish to copy part of the code of the Library +into a program that is not a library. + +4. You may copy and distribute the Library (or a portion or derivative of +it, under Section 2) in object code or executable form under the terms of +Sections 1 and 2 above provided that you accompany it with the complete corresponding +machine-readable source code, which must be distributed under the terms of +Sections 1 and 2 above on a medium customarily used for software interchange. + +If distribution of object code is made by offering access to copy from a designated +place, then offering equivalent access to copy the source code from the same +place satisfies the requirement to distribute the source code, even though +third parties are not compelled to copy the source along with the object code. + +5. A program that contains no derivative of any portion of the Library, but +is designed to work with the Library by being compiled or linked with it, +is called a "work that uses the Library". Such a work, in isolation, is not +a derivative work of the Library, and therefore falls outside the scope of +this License. + +However, linking a "work that uses the Library" with the Library creates an +executable that is a derivative of the Library (because it contains portions +of the Library), rather than a "work that uses the library". The executable +is therefore covered by this License. Section 6 states terms for distribution +of such executables. + +When a "work that uses the Library" uses material from a header file that +is part of the Library, the object code for the work may be a derivative work +of the Library even though the source code is not. Whether this is true is +especially significant if the work can be linked without the Library, or if +the work is itself a library. The threshold for this to be true is not precisely +defined by law. + +If such an object file uses only numerical parameters, data structure layouts +and accessors, and small macros and small inline functions (ten lines or less +in length), then the use of the object file is unrestricted, regardless of +whether it is legally a derivative work. (Executables containing this object +code plus portions of the Library will still fall under Section 6.) + +Otherwise, if the work is a derivative of the Library, you may distribute +the object code for the work under the terms of Section 6. Any executables +containing that work also fall under Section 6, whether or not they are linked +directly with the Library itself. + +6. As an exception to the Sections above, you may also combine or link a "work +that uses the Library" with the Library to produce a work containing portions +of the Library, and distribute that work under terms of your choice, provided +that the terms permit modification of the work for the customer's own use +and reverse engineering for debugging such modifications. + +You must give prominent notice with each copy of the work that the Library +is used in it and that the Library and its use are covered by this License. +You must supply a copy of this License. If the work during execution displays +copyright notices, you must include the copyright notice for the Library among +them, as well as a reference directing the user to the copy of this License. +Also, you must do one of these things: + +a) Accompany the work with the complete corresponding machine-readable source +code for the Library including whatever changes were used in the work (which +must be distributed under Sections 1 and 2 above); and, if the work is an +executable linked with the Library, with the complete machine-readable "work +that uses the Library", as object code and/or source code, so that the user +can modify the Library and then relink to produce a modified executable containing +the modified Library. (It is understood that the user who changes the contents +of definitions files in the Library will not necessarily be able to recompile +the application to use the modified definitions.) + +b) Use a suitable shared library mechanism for linking with the Library. A +suitable mechanism is one that (1) uses at run time a copy of the library +already present on the user's computer system, rather than copying library +functions into the executable, and (2) will operate properly with a modified +version of the library, if the user installs one, as long as the modified +version is interface-compatible with the version that the work was made with. + +c) Accompany the work with a written offer, valid for at least three years, +to give the same user the materials specified in Subsection 6a, above, for +a charge no more than the cost of performing this distribution. + +d) If distribution of the work is made by offering access to copy from a designated +place, offer equivalent access to copy the above specified materials from +the same place. + +e) Verify that the user has already received a copy of these materials or +that you have already sent this user a copy. + +For an executable, the required form of the "work that uses the Library" must +include any data and utility programs needed for reproducing the executable +from it. However, as a special exception, the materials to be distributed +need not include anything that is normally distributed (in either source or +binary form) with the major components (compiler, kernel, and so on) of the +operating system on which the executable runs, unless that component itself +accompanies the executable. + +It may happen that this requirement contradicts the license restrictions of +other proprietary libraries that do not normally accompany the operating system. +Such a contradiction means you cannot use both them and the Library together +in an executable that you distribute. + +7. You may place library facilities that are a work based on the Library side-by-side +in a single library together with other library facilities not covered by +this License, and distribute such a combined library, provided that the separate +distribution of the work based on the Library and of the other library facilities +is otherwise permitted, and provided that you do these two things: + +a) Accompany the combined library with a copy of the same work based on the +Library, uncombined with any other library facilities. This must be distributed +under the terms of the Sections above. + +b) Give prominent notice with the combined library of the fact that part of +it is a work based on the Library, and explaining where to find the accompanying +uncombined form of the same work. + +8. You may not copy, modify, sublicense, link with, or distribute the Library +except as expressly provided under this License. Any attempt otherwise to +copy, modify, sublicense, link with, or distribute the Library is void, and +will automatically terminate your rights under this License. However, parties +who have received copies, or rights, from you under this License will not +have their licenses terminated so long as such parties remain in full compliance. + +9. You are not required to accept this License, since you have not signed +it. However, nothing else grants you permission to modify or distribute the +Library or its derivative works. These actions are prohibited by law if you +do not accept this License. Therefore, by modifying or distributing the Library +(or any work based on the Library), you indicate your acceptance of this License +to do so, and all its terms and conditions for copying, distributing or modifying +the Library or works based on it. + +10. Each time you redistribute the Library (or any work based on the Library), +the recipient automatically receives a license from the original licensor +to copy, distribute, link with or modify the Library subject to these terms +and conditions. You may not impose any further restrictions on the recipients' +exercise of the rights granted herein. You are not responsible for enforcing +compliance by third parties with this License. + +11. If, as a consequence of a court judgment or allegation of patent infringement +or for any other reason (not limited to patent issues), conditions are imposed +on you (whether by court order, agreement or otherwise) that contradict the +conditions of this License, they do not excuse you from the conditions of +this License. If you cannot distribute so as to satisfy simultaneously your +obligations under this License and any other pertinent obligations, then as +a consequence you may not distribute the Library at all. For example, if a +patent license would not permit royalty-free redistribution of the Library +by all those who receive copies directly or indirectly through you, then the +only way you could satisfy both it and this License would be to refrain entirely +from distribution of the Library. + +If any portion of this section is held invalid or unenforceable under any +particular circumstance, the balance of the section is intended to apply, +and the section as a whole is intended to apply in other circumstances. + +It is not the purpose of this section to induce you to infringe any patents +or other property right claims or to contest validity of any such claims; +this section has the sole purpose of protecting the integrity of the free +software distribution system which is implemented by public license practices. +Many people have made generous contributions to the wide range of software +distributed through that system in reliance on consistent application of that +system; it is up to the author/donor to decide if he or she is willing to +distribute software through any other system and a licensee cannot impose +that choice. + +This section is intended to make thoroughly clear what is believed to be a +consequence of the rest of this License. + +12. If the distribution and/or use of the Library is restricted in certain +countries either by patents or by copyrighted interfaces, the original copyright +holder who places the Library under this License may add an explicit geographical +distribution limitation excluding those countries, so that distribution is +permitted only in or among countries not thus excluded. In such case, this +License incorporates the limitation as if written in the body of this License. + +13. The Free Software Foundation may publish revised and/or new versions of +the Lesser General Public License from time to time. Such new versions will +be similar in spirit to the present version, but may differ in detail to address +new problems or concerns. + +Each version is given a distinguishing version number. If the Library specifies +a version number of this License which applies to it and "any later version", +you have the option of following the terms and conditions either of that version +or of any later version published by the Free Software Foundation. If the +Library does not specify a license version number, you may choose any version +ever published by the Free Software Foundation. + +14. If you wish to incorporate parts of the Library into other free programs +whose distribution conditions are incompatible with these, write to the author +to ask for permission. For software which is copyrighted by the Free Software +Foundation, write to the Free Software Foundation; we sometimes make exceptions +for this. Our decision will be guided by the two goals of preserving the free +status of all derivatives of our free software and of promoting the sharing +and reuse of software generally. + + NO WARRANTY + +15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR +THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE +STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY +"AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, +BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE +OF THE LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME +THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. + +16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING +WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE +THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY +GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE +OR INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA +OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES +OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH +HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. +END OF TERMS AND CONDITIONS + +How to Apply These Terms to Your New Libraries + +If you develop a new library, and you want it to be of the greatest possible +use to the public, we recommend making it free software that everyone can +redistribute and change. You can do so by permitting redistribution under +these terms (or, alternatively, under the terms of the ordinary General Public +License). + +To apply these terms, attach the following notices to the library. It is safest +to attach them to the start of each source file to most effectively convey +the exclusion of warranty; and each file should have at least the "copyright" +line and a pointer to where the full notice is found. + +< one line to give the library's name and an idea of what it does. > + +Copyright (C) < year > < name of author > + +This library is free software; you can redistribute it and/or modify it under +the terms of the GNU Lesser General Public License as published by the Free +Software Foundation; either version 2.1 of the License, or (at your option) +any later version. + +This library is distributed in the hope that it will be useful, but WITHOUT +ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS +FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more +details. + +You should have received a copy of the GNU Lesser General Public License along +with this library; if not, write to the Free Software Foundation, Inc., 51 +Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Also add information +on how to contact you by electronic and paper mail. + +You should also get your employer (if you work as a programmer) or your school, +if any, to sign a "copyright disclaimer" for the library, if necessary. Here +is a sample; alter the names: + +Yoyodyne, Inc., hereby disclaims all copyright interest in + +the library `Frob' (a library for tweaking knobs) written + +by James Random Hacker. + +< signature of Ty Coon > , 1 April 1990 + +Ty Coon, President of Vice + +That's all there is to it! diff --git a/LICENSES/LGPL-3.0-only.txt b/LICENSES/LGPL-3.0-only.txt new file mode 100644 --- /dev/null +++ b/LICENSES/LGPL-3.0-only.txt @@ -0,0 +1,163 @@ +GNU LESSER GENERAL PUBLIC LICENSE + +Version 3, 29 June 2007 + +Copyright (C) 2007 Free Software Foundation, Inc. + +Everyone is permitted to copy and distribute verbatim copies of this license +document, but changing it is not allowed. + +This version of the GNU Lesser General Public License incorporates the terms +and conditions of version 3 of the GNU General Public License, supplemented +by the additional permissions listed below. + + 0. Additional Definitions. + + + +As used herein, "this License" refers to version 3 of the GNU Lesser General +Public License, and the "GNU GPL" refers to version 3 of the GNU General Public +License. + + + +"The Library" refers to a covered work governed by this License, other than +an Application or a Combined Work as defined below. + + + +An "Application" is any work that makes use of an interface provided by the +Library, but which is not otherwise based on the Library. Defining a subclass +of a class defined by the Library is deemed a mode of using an interface provided +by the Library. + + + +A "Combined Work" is a work produced by combining or linking an Application +with the Library. The particular version of the Library with which the Combined +Work was made is also called the "Linked Version". + + + +The "Minimal Corresponding Source" for a Combined Work means the Corresponding +Source for the Combined Work, excluding any source code for portions of the +Combined Work that, considered in isolation, are based on the Application, +and not on the Linked Version. + + + +The "Corresponding Application Code" for a Combined Work means the object +code and/or source code for the Application, including any data and utility +programs needed for reproducing the Combined Work from the Application, but +excluding the System Libraries of the Combined Work. + + 1. Exception to Section 3 of the GNU GPL. + +You may convey a covered work under sections 3 and 4 of this License without +being bound by section 3 of the GNU GPL. + + 2. Conveying Modified Versions. + +If you modify a copy of the Library, and, in your modifications, a facility +refers to a function or data to be supplied by an Application that uses the +facility (other than as an argument passed when the facility is invoked), +then you may convey a copy of the modified version: + +a) under this License, provided that you make a good faith effort to ensure +that, in the event an Application does not supply the function or data, the +facility still operates, and performs whatever part of its purpose remains +meaningful, or + +b) under the GNU GPL, with none of the additional permissions of this License +applicable to that copy. + + 3. Object Code Incorporating Material from Library Header Files. + +The object code form of an Application may incorporate material from a header +file that is part of the Library. You may convey such object code under terms +of your choice, provided that, if the incorporated material is not limited +to numerical parameters, data structure layouts and accessors, or small macros, +inline functions and templates (ten or fewer lines in length), you do both +of the following: + +a) Give prominent notice with each copy of the object code that the Library +is used in it and that the Library and its use are covered by this License. + +b) Accompany the object code with a copy of the GNU GPL and this license document. + + 4. Combined Works. + +You may convey a Combined Work under terms of your choice that, taken together, +effectively do not restrict modification of the portions of the Library contained +in the Combined Work and reverse engineering for debugging such modifications, +if you also do each of the following: + +a) Give prominent notice with each copy of the Combined Work that the Library +is used in it and that the Library and its use are covered by this License. + +b) Accompany the Combined Work with a copy of the GNU GPL and this license +document. + +c) For a Combined Work that displays copyright notices during execution, include +the copyright notice for the Library among these notices, as well as a reference +directing the user to the copies of the GNU GPL and this license document. + + d) Do one of the following: + +0) Convey the Minimal Corresponding Source under the terms of this License, +and the Corresponding Application Code in a form suitable for, and under terms +that permit, the user to recombine or relink the Application with a modified +version of the Linked Version to produce a modified Combined Work, in the +manner specified by section 6 of the GNU GPL for conveying Corresponding Source. + +1) Use a suitable shared library mechanism for linking with the Library. A +suitable mechanism is one that (a) uses at run time a copy of the Library +already present on the user's computer system, and (b) will operate properly +with a modified version of the Library that is interface-compatible with the +Linked Version. + +e) Provide Installation Information, but only if you would otherwise be required +to provide such information under section 6 of the GNU GPL, and only to the +extent that such information is necessary to install and execute a modified +version of the Combined Work produced by recombining or relinking the Application +with a modified version of the Linked Version. (If you use option 4d0, the +Installation Information must accompany the Minimal Corresponding Source and +Corresponding Application Code. If you use option 4d1, you must provide the +Installation Information in the manner specified by section 6 of the GNU GPL +for conveying Corresponding Source.) + + 5. Combined Libraries. + +You may place library facilities that are a work based on the Library side +by side in a single library together with other library facilities that are +not Applications and are not covered by this License, and convey such a combined +library under terms of your choice, if you do both of the following: + +a) Accompany the combined library with a copy of the same work based on the +Library, uncombined with any other library facilities, conveyed under the +terms of this License. + +b) Give prominent notice with the combined library that part of it is a work +based on the Library, and explaining where to find the accompanying uncombined +form of the same work. + + 6. Revised Versions of the GNU Lesser General Public License. + +The Free Software Foundation may publish revised and/or new versions of the +GNU Lesser General Public License from time to time. Such new versions will +be similar in spirit to the present version, but may differ in detail to address +new problems or concerns. + +Each version is given a distinguishing version number. If the Library as you +received it specifies that a certain numbered version of the GNU Lesser General +Public License "or any later version" applies to it, you have the option of +following the terms and conditions either of that published version or of +any later version published by the Free Software Foundation. If the Library +as you received it does not specify a version number of the GNU Lesser General +Public License, you may choose any version of the GNU Lesser General Public +License ever published by the Free Software Foundation. + +If the Library as you received it specifies that a proxy can decide whether +future versions of the GNU Lesser General Public License shall apply, that +proxy's public statement of acceptance of any version is permanent authorization +for you to choose that version for the Library. diff --git a/LICENSES/LicenseRef-KDE-Accepted-GPL.txt b/LICENSES/LicenseRef-KDE-Accepted-GPL.txt new file mode 100644 --- /dev/null +++ b/LICENSES/LicenseRef-KDE-Accepted-GPL.txt @@ -0,0 +1,12 @@ +This library is free software; you can redistribute it and/or +modify it under the terms of the GNU General Public License as +published by the Free Software Foundation; either version 3 of +the license or (at your option) at any later version that is +accepted by the membership of KDE e.V. (or its successor +approved by the membership of KDE e.V.), which shall act as a +proxy as defined in Section 14 of version 3 of the license. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. diff --git a/LICENSES/LicenseRef-KDE-Accepted-LGPL.txt b/LICENSES/LicenseRef-KDE-Accepted-LGPL.txt new file mode 100644 --- /dev/null +++ b/LICENSES/LicenseRef-KDE-Accepted-LGPL.txt @@ -0,0 +1,12 @@ +This library is free software; you can redistribute it and/or +modify it under the terms of the GNU Lesser General Public +License as published by the Free Software Foundation; either +version 3 of the license or (at your option) any later version +that is accepted by the membership of KDE e.V. (or its successor +approved by the membership of KDE e.V.), which shall act as a +proxy as defined in Section 6 of version 3 of the license. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. diff --git a/autotests/bearerpropertiestest.h b/autotests/bearerpropertiestest.h --- a/autotests/bearerpropertiestest.h +++ b/autotests/bearerpropertiestest.h @@ -1,21 +1,7 @@ /* - Copyright 2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MODEMMANAGERQT_BEARER_PROPERTIES_TEST_H @@ -34,7 +20,7 @@ #if MM_CHECK_VERSION(1, 2, 0) void testBearerProperties(); #endif - + private: Bearer *bearer; FakeModem *fakeModem; diff --git a/autotests/bearerpropertiestest.cpp b/autotests/bearerpropertiestest.cpp --- a/autotests/bearerpropertiestest.cpp +++ b/autotests/bearerpropertiestest.cpp @@ -1,21 +1,7 @@ /* - Copyright 2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #include "bearerpropertiestest.h" diff --git a/autotests/modem3gpppropertiestest.h b/autotests/modem3gpppropertiestest.h --- a/autotests/modem3gpppropertiestest.h +++ b/autotests/modem3gpppropertiestest.h @@ -1,21 +1,7 @@ /* - Copyright 2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MODEMMANAGERQT_MODEM3GPP_PROPERTIES_TEST_H diff --git a/autotests/modem3gpppropertiestest.cpp b/autotests/modem3gpppropertiestest.cpp --- a/autotests/modem3gpppropertiestest.cpp +++ b/autotests/modem3gpppropertiestest.cpp @@ -1,21 +1,7 @@ /* - Copyright 2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #include "modem3gpppropertiestest.h" diff --git a/autotests/modem3gppussdpropertiestest.h b/autotests/modem3gppussdpropertiestest.h --- a/autotests/modem3gppussdpropertiestest.h +++ b/autotests/modem3gppussdpropertiestest.h @@ -1,21 +1,7 @@ /* - Copyright 2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MODEMMANAGERQT_MODEM3GPP_USSD_PROPERTIES_TEST_H diff --git a/autotests/modem3gppussdpropertiestest.cpp b/autotests/modem3gppussdpropertiestest.cpp --- a/autotests/modem3gppussdpropertiestest.cpp +++ b/autotests/modem3gppussdpropertiestest.cpp @@ -1,21 +1,7 @@ /* - Copyright 2015 Jan Grulich + SPDX-FileCopyrightText: 2015 Jan Grulich - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #include "modem3gppussdpropertiestest.h" diff --git a/autotests/modemcdmapropertiestest.h b/autotests/modemcdmapropertiestest.h --- a/autotests/modemcdmapropertiestest.h +++ b/autotests/modemcdmapropertiestest.h @@ -1,21 +1,7 @@ /* - Copyright 2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MODEMMANAGERQT_MODEMCDMA_PROPERTIES_TEST_H diff --git a/autotests/modemcdmapropertiestest.cpp b/autotests/modemcdmapropertiestest.cpp --- a/autotests/modemcdmapropertiestest.cpp +++ b/autotests/modemcdmapropertiestest.cpp @@ -1,21 +1,7 @@ /* - Copyright 2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #include "modemcdmapropertiestest.h" diff --git a/autotests/modemlocationpropertiestest.h b/autotests/modemlocationpropertiestest.h --- a/autotests/modemlocationpropertiestest.h +++ b/autotests/modemlocationpropertiestest.h @@ -1,21 +1,7 @@ /* - Copyright 2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MODEMMANAGERQT_MODEMLOCATION_PROPERTIES_TEST_H diff --git a/autotests/modemlocationpropertiestest.cpp b/autotests/modemlocationpropertiestest.cpp --- a/autotests/modemlocationpropertiestest.cpp +++ b/autotests/modemlocationpropertiestest.cpp @@ -1,21 +1,7 @@ /* - Copyright 2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #include "modemlocationpropertiestest.h" diff --git a/autotests/modemmessagingpropertiestest.h b/autotests/modemmessagingpropertiestest.h --- a/autotests/modemmessagingpropertiestest.h +++ b/autotests/modemmessagingpropertiestest.h @@ -1,21 +1,7 @@ /* - Copyright 2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MODEMMANAGERQT_MODEMMESSAGING_PROPERTIES_TEST_H diff --git a/autotests/modemmessagingpropertiestest.cpp b/autotests/modemmessagingpropertiestest.cpp --- a/autotests/modemmessagingpropertiestest.cpp +++ b/autotests/modemmessagingpropertiestest.cpp @@ -1,21 +1,7 @@ /* - Copyright 2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #include "modemmessagingpropertiestest.h" diff --git a/autotests/modemomapropertiestest.h b/autotests/modemomapropertiestest.h --- a/autotests/modemomapropertiestest.h +++ b/autotests/modemomapropertiestest.h @@ -1,21 +1,7 @@ /* - Copyright 2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MODEMMANAGERQT_MODEMOMA_PROPERTIES_TEST_H diff --git a/autotests/modemomapropertiestest.cpp b/autotests/modemomapropertiestest.cpp --- a/autotests/modemomapropertiestest.cpp +++ b/autotests/modemomapropertiestest.cpp @@ -1,21 +1,7 @@ /* - Copyright 2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #include "modemomapropertiestest.h" diff --git a/autotests/modempropertiestest.h b/autotests/modempropertiestest.h --- a/autotests/modempropertiestest.h +++ b/autotests/modempropertiestest.h @@ -1,21 +1,7 @@ /* - Copyright 2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MODEMMANAGERQT_MODEM_PROPERTIES_TEST_H diff --git a/autotests/modempropertiestest.cpp b/autotests/modempropertiestest.cpp --- a/autotests/modempropertiestest.cpp +++ b/autotests/modempropertiestest.cpp @@ -1,21 +1,7 @@ /* - Copyright 2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #include "modempropertiestest.h" diff --git a/autotests/modemtest.h b/autotests/modemtest.h --- a/autotests/modemtest.h +++ b/autotests/modemtest.h @@ -1,21 +1,7 @@ /* - Copyright 2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MODEMMANAGERQT_MODEM_TEST_H diff --git a/autotests/modemtest.cpp b/autotests/modemtest.cpp --- a/autotests/modemtest.cpp +++ b/autotests/modemtest.cpp @@ -1,21 +1,7 @@ /* - Copyright 2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #include "modemtest.h" diff --git a/autotests/modemtimepropertiestest.h b/autotests/modemtimepropertiestest.h --- a/autotests/modemtimepropertiestest.h +++ b/autotests/modemtimepropertiestest.h @@ -1,21 +1,7 @@ /* - Copyright 2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MODEMMANAGERQT_MODEMTIME_PROPERTIES_TEST_H diff --git a/autotests/modemtimepropertiestest.cpp b/autotests/modemtimepropertiestest.cpp --- a/autotests/modemtimepropertiestest.cpp +++ b/autotests/modemtimepropertiestest.cpp @@ -1,21 +1,7 @@ /* - Copyright 2015 Jan Grulich + SPDX-FileCopyrightText: 2015 Jan Grulich - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #include "modemtimepropertiestest.h" diff --git a/cmake/FindModemManager.cmake b/cmake/FindModemManager.cmake --- a/cmake/FindModemManager.cmake +++ b/cmake/FindModemManager.cmake @@ -7,31 +7,10 @@ # MODEMMANAGER_CFLAGS - Compiler switches required for using ModemManager # MODEMMANAGER_VERSION - version number of ModemManager -# Copyright (c) 2006, Alexander Neundorf, -# Copyright (c) 2007, Will Stephenson, +# SPDX-FileCopyrightText: 2006 Alexander Neundorf +# SPDX-FileCopyrightText: 2007 Will Stephenson # -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# 3. The name of the author may not be used to endorse or promote products -# derived from this software without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR -# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES -# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. -# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +# SPDX-License-Identifier: BSD-3-Clause IF (MODEMMANAGER_INCLUDE_DIRS) # in cache already diff --git a/examples/main.cpp b/examples/main.cpp --- a/examples/main.cpp +++ b/examples/main.cpp @@ -1,21 +1,7 @@ /* - Copyright 2013 Jan Grulich + SPDX-FileCopyrightText: 2013 Jan Grulich - This program is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License as - published by the Free Software Foundation; either version 2 of - the License or (at your option) version 3 or any later version - accepted by the membership of KDE e.V. (or its successor approved - by the membership of KDE e.V.), which shall act as a proxy - defined in Section 14 of version 3 of the license. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . + SPDX-License-Identifier: GPL-2.0-only OR GPL-3.0-only OR LicenseRef-KDE-Accepted-GPL */ #include diff --git a/src/bearer.h b/src/bearer.h --- a/src/bearer.h +++ b/src/bearer.h @@ -1,22 +1,8 @@ /* - Copyright 2013 Lukas Tinkl - Copyright 2013-2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2013 Lukas Tinkl + SPDX-FileCopyrightText: 2013-2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MODEMMANAGERQT_BEARER_H diff --git a/src/bearer.cpp b/src/bearer.cpp --- a/src/bearer.cpp +++ b/src/bearer.cpp @@ -1,22 +1,8 @@ /* - Copyright 2013 Lukas Tinkl - Copyright 2013-2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2013 Lukas Tinkl + SPDX-FileCopyrightText: 2013-2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #include "bearer_p.h" diff --git a/src/bearer_p.h b/src/bearer_p.h --- a/src/bearer_p.h +++ b/src/bearer_p.h @@ -1,22 +1,8 @@ /* - Copyright 2013 Lukas Tinkl - Copyright 2013-2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2013 Lukas Tinkl + SPDX-FileCopyrightText: 2013-2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MODEMMANAGERQT_BEARER_P_H diff --git a/src/call.h b/src/call.h --- a/src/call.h +++ b/src/call.h @@ -1,21 +1,7 @@ /* - Copyright 2018 Aleksander Morgado - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2018 Aleksander Morgado + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MODEMMANAGERQT_CALL_H diff --git a/src/call.cpp b/src/call.cpp --- a/src/call.cpp +++ b/src/call.cpp @@ -1,21 +1,7 @@ /* - Copyright 2018 Aleksander Morgado - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2018 Aleksander Morgado + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #include "call.h" diff --git a/src/call_p.h b/src/call_p.h --- a/src/call_p.h +++ b/src/call_p.h @@ -1,21 +1,7 @@ /* - Copyright 2018 Aleksander Morgado - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2018 Aleksander Morgado + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MODEMMANAGER_CALL_P_H diff --git a/src/dbus/dbus.h b/src/dbus/dbus.h --- a/src/dbus/dbus.h +++ b/src/dbus/dbus.h @@ -1,25 +1,11 @@ /* - Copyright 2008 Will Stephenson - Copyright 2010 Lamarque Souza - Copyright 2013 Lukas Tinkl - Copyright 2013 Anant Kamath - Copyright 2015 Jan Grulich + SPDX-FileCopyrightText: 2008 Will Stephenson + SPDX-FileCopyrightText: 2010 Lamarque Souza + SPDX-FileCopyrightText: 2013 Lukas Tinkl + SPDX-FileCopyrightText: 2013 Anant Kamath + SPDX-FileCopyrightText: 2015 Jan Grulich - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MODEMMANAGER_DBUS_H diff --git a/src/dbus/fakedbus.h b/src/dbus/fakedbus.h --- a/src/dbus/fakedbus.h +++ b/src/dbus/fakedbus.h @@ -1,25 +1,11 @@ /* - Copyright 2008 Will Stephenson - Copyright 2010 Lamarque Souza - Copyright 2013 Lukas Tinkl - Copyright 2013 Anant Kamath - Copyright 2015 Jan Grulich + SPDX-FileCopyrightText: 2008 Will Stephenson + SPDX-FileCopyrightText: 2010 Lamarque Souza + SPDX-FileCopyrightText: 2013 Lukas Tinkl + SPDX-FileCopyrightText: 2013 Anant Kamath + SPDX-FileCopyrightText: 2015 Jan Grulich - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MODEMMANAGER_FAKE_DBUS_H diff --git a/src/fakemodem/bearer.h b/src/fakemodem/bearer.h --- a/src/fakemodem/bearer.h +++ b/src/fakemodem/bearer.h @@ -1,21 +1,7 @@ /* - Copyright 2015 Jan Grulich + SPDX-FileCopyrightText: 2015 Jan Grulich - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MODEMMANAGERQT_FAKE_MODEM_BEARER_H diff --git a/src/fakemodem/bearer.cpp b/src/fakemodem/bearer.cpp --- a/src/fakemodem/bearer.cpp +++ b/src/fakemodem/bearer.cpp @@ -1,21 +1,7 @@ /* - Copyright 2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #include "bearer.h" diff --git a/src/fakemodem/fakemodem.h b/src/fakemodem/fakemodem.h --- a/src/fakemodem/fakemodem.h +++ b/src/fakemodem/fakemodem.h @@ -1,21 +1,7 @@ /* - Copyright 2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MODEMMANAGERQT_FAKE_MODEM_H diff --git a/src/fakemodem/fakemodem.cpp b/src/fakemodem/fakemodem.cpp --- a/src/fakemodem/fakemodem.cpp +++ b/src/fakemodem/fakemodem.cpp @@ -1,21 +1,7 @@ /* - Copyright 2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #include "fakemodem.h" diff --git a/src/fakemodem/modem.h b/src/fakemodem/modem.h --- a/src/fakemodem/modem.h +++ b/src/fakemodem/modem.h @@ -1,21 +1,7 @@ /* - Copyright 2015 Jan Grulich + SPDX-FileCopyrightText: 2015 Jan Grulich - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MODEMMANAGERQT_FAKE_MODEM_MODEM_H diff --git a/src/fakemodem/modem.cpp b/src/fakemodem/modem.cpp --- a/src/fakemodem/modem.cpp +++ b/src/fakemodem/modem.cpp @@ -1,21 +1,7 @@ /* - Copyright 2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #include "modem.h" diff --git a/src/fakemodem/modem3gpp.h b/src/fakemodem/modem3gpp.h --- a/src/fakemodem/modem3gpp.h +++ b/src/fakemodem/modem3gpp.h @@ -1,21 +1,7 @@ /* - Copyright 2015 Jan Grulich + SPDX-FileCopyrightText: 2015 Jan Grulich - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MODEMMANAGERQT_FAKE_MODEM_MODEM_3GPP_H diff --git a/src/fakemodem/modem3gpp.cpp b/src/fakemodem/modem3gpp.cpp --- a/src/fakemodem/modem3gpp.cpp +++ b/src/fakemodem/modem3gpp.cpp @@ -1,21 +1,7 @@ /* - Copyright 2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #include "modem3gpp.h" diff --git a/src/fakemodem/modem3gppussd.h b/src/fakemodem/modem3gppussd.h --- a/src/fakemodem/modem3gppussd.h +++ b/src/fakemodem/modem3gppussd.h @@ -1,21 +1,7 @@ /* - Copyright 2015 Jan Grulich + SPDX-FileCopyrightText: 2015 Jan Grulich - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MODEMMANAGERQT_FAKE_MODEM_MODEM_3GPP_USSD_H diff --git a/src/fakemodem/modem3gppussd.cpp b/src/fakemodem/modem3gppussd.cpp --- a/src/fakemodem/modem3gppussd.cpp +++ b/src/fakemodem/modem3gppussd.cpp @@ -1,21 +1,7 @@ /* - Copyright 2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #include "modem3gppussd.h" diff --git a/src/fakemodem/modemcdma.h b/src/fakemodem/modemcdma.h --- a/src/fakemodem/modemcdma.h +++ b/src/fakemodem/modemcdma.h @@ -1,21 +1,7 @@ /* - Copyright 2015 Jan Grulich + SPDX-FileCopyrightText: 2015 Jan Grulich - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MODEMMANAGERQT_FAKE_MODEM_MODEMCDMA_H diff --git a/src/fakemodem/modemcdma.cpp b/src/fakemodem/modemcdma.cpp --- a/src/fakemodem/modemcdma.cpp +++ b/src/fakemodem/modemcdma.cpp @@ -1,21 +1,7 @@ /* - Copyright 2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #include "modemcdma.h" diff --git a/src/fakemodem/modemlocation.h b/src/fakemodem/modemlocation.h --- a/src/fakemodem/modemlocation.h +++ b/src/fakemodem/modemlocation.h @@ -1,21 +1,7 @@ /* - Copyright 2015 Jan Grulich + SPDX-FileCopyrightText: 2015 Jan Grulich - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MODEMMANAGERQT_FAKE_MODEM_MODEM_LOCATION_H diff --git a/src/fakemodem/modemlocation.cpp b/src/fakemodem/modemlocation.cpp --- a/src/fakemodem/modemlocation.cpp +++ b/src/fakemodem/modemlocation.cpp @@ -1,21 +1,7 @@ /* - Copyright 2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #include "modemlocation.h" diff --git a/src/fakemodem/modemmessaging.h b/src/fakemodem/modemmessaging.h --- a/src/fakemodem/modemmessaging.h +++ b/src/fakemodem/modemmessaging.h @@ -1,21 +1,7 @@ /* - Copyright 2015 Jan Grulich + SPDX-FileCopyrightText: 2015 Jan Grulich - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MODEMMANAGERQT_FAKE_MODEM_MODEM_MESSAGING_H diff --git a/src/fakemodem/modemmessaging.cpp b/src/fakemodem/modemmessaging.cpp --- a/src/fakemodem/modemmessaging.cpp +++ b/src/fakemodem/modemmessaging.cpp @@ -1,21 +1,7 @@ /* - Copyright 2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #include "modemmessaging.h" diff --git a/src/fakemodem/modemoma.h b/src/fakemodem/modemoma.h --- a/src/fakemodem/modemoma.h +++ b/src/fakemodem/modemoma.h @@ -1,21 +1,7 @@ /* - Copyright 2015 Jan Grulich + SPDX-FileCopyrightText: 2015 Jan Grulich - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MODEMMANAGERQT_FAKE_MODEM_MODEM_OMA_H diff --git a/src/fakemodem/modemoma.cpp b/src/fakemodem/modemoma.cpp --- a/src/fakemodem/modemoma.cpp +++ b/src/fakemodem/modemoma.cpp @@ -1,21 +1,7 @@ /* - Copyright 2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #include "modemoma.h" diff --git a/src/fakemodem/modemsimple.h b/src/fakemodem/modemsimple.h --- a/src/fakemodem/modemsimple.h +++ b/src/fakemodem/modemsimple.h @@ -1,21 +1,7 @@ /* - Copyright 2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MODEMMANAGERQT_FAKE_MODEM_MODEM_SIMPLE_H diff --git a/src/fakemodem/modemsimple.cpp b/src/fakemodem/modemsimple.cpp --- a/src/fakemodem/modemsimple.cpp +++ b/src/fakemodem/modemsimple.cpp @@ -1,21 +1,7 @@ /* - Copyright 2015 Jan Grulich + SPDX-FileCopyrightText: 2015 Jan Grulich - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #include "modemsimple.h" diff --git a/src/fakemodem/modemtime.h b/src/fakemodem/modemtime.h --- a/src/fakemodem/modemtime.h +++ b/src/fakemodem/modemtime.h @@ -1,21 +1,7 @@ /* - Copyright 2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MODEMMANAGERQT_FAKE_MODEM_MODEM_TIME_H diff --git a/src/fakemodem/modemtime.cpp b/src/fakemodem/modemtime.cpp --- a/src/fakemodem/modemtime.cpp +++ b/src/fakemodem/modemtime.cpp @@ -1,21 +1,7 @@ /* - Copyright 2015 Jan Grulich + SPDX-FileCopyrightText: 2015 Jan Grulich - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #include "modemtime.h" diff --git a/src/fakemodem/objectmanager.h b/src/fakemodem/objectmanager.h --- a/src/fakemodem/objectmanager.h +++ b/src/fakemodem/objectmanager.h @@ -1,21 +1,7 @@ /* - Copyright 2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MODEMMANAGERQT_FAKE_MODEM_OBJECT_MANAGER_H diff --git a/src/fakemodem/objectmanager.cpp b/src/fakemodem/objectmanager.cpp --- a/src/fakemodem/objectmanager.cpp +++ b/src/fakemodem/objectmanager.cpp @@ -1,21 +1,7 @@ /* - Copyright 2015 Jan Grulich + SPDX-FileCopyrightText: 2015 Jan Grulich - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #include "objectmanager.h" diff --git a/src/fakemodem/sms.h b/src/fakemodem/sms.h --- a/src/fakemodem/sms.h +++ b/src/fakemodem/sms.h @@ -1,21 +1,7 @@ /* - Copyright 2015 Jan Grulich + SPDX-FileCopyrightText: 2015 Jan Grulich - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MODEMMANAGERQT_FAKE_MODEM_SMS_H diff --git a/src/fakemodem/sms.cpp b/src/fakemodem/sms.cpp --- a/src/fakemodem/sms.cpp +++ b/src/fakemodem/sms.cpp @@ -1,21 +1,7 @@ /* - Copyright 2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #include "sms.h" diff --git a/src/generictypes.h b/src/generictypes.h --- a/src/generictypes.h +++ b/src/generictypes.h @@ -1,23 +1,9 @@ /* - Copyright 2010 Lamarque Souza - Copyright 2013 Lukas Tinkl - Copyright 2013-2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2010 Lamarque Souza + SPDX-FileCopyrightText: 2013 Lukas Tinkl + SPDX-FileCopyrightText: 2013-2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MODEMMANAGERQT_GENERIC_TYPES_H diff --git a/src/generictypes.cpp b/src/generictypes.cpp --- a/src/generictypes.cpp +++ b/src/generictypes.cpp @@ -1,23 +1,9 @@ /* - Copyright 2010 Lamarque Souza - Copyright 2013 Lukas Tinkl - Copyright 2013-2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2010 Lamarque Souza + SPDX-FileCopyrightText: 2013 Lukas Tinkl + SPDX-FileCopyrightText: 2013-2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #include "generictypes.h" diff --git a/src/generictypes_p.h b/src/generictypes_p.h --- a/src/generictypes_p.h +++ b/src/generictypes_p.h @@ -1,23 +1,9 @@ /* - Copyright 2010 Lamarque Souza - Copyright 2013 Lukas Tinkl - Copyright 2013-2015 Jan Grulich + SPDX-FileCopyrightText: 2010 Lamarque Souza + SPDX-FileCopyrightText: 2013 Lukas Tinkl + SPDX-FileCopyrightText: 2013-2015 Jan Grulich - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MODEMMANAGERQT_GENERIC_TYPES_P_H diff --git a/src/interface.h b/src/interface.h --- a/src/interface.h +++ b/src/interface.h @@ -1,21 +1,7 @@ /* - Copyright 2013-2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2013-2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MODEMMANAGERQT_INTERFACE_H diff --git a/src/interface.cpp b/src/interface.cpp --- a/src/interface.cpp +++ b/src/interface.cpp @@ -1,21 +1,7 @@ /* - Copyright 2013-2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2013-2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #include "interface_p.h" diff --git a/src/interface_p.h b/src/interface_p.h --- a/src/interface_p.h +++ b/src/interface_p.h @@ -1,21 +1,7 @@ /* - Copyright 2013-2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2013-2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MODEMMANAGERQT_INTERFACE_P_H diff --git a/src/macros_p.h b/src/macros_p.h --- a/src/macros_p.h +++ b/src/macros_p.h @@ -1,21 +1,7 @@ /* - Copyright 2011 Will Stephenson + SPDX-FileCopyrightText: 2011 Will Stephenson - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MM_MACROS_H diff --git a/src/manager.h b/src/manager.h --- a/src/manager.h +++ b/src/manager.h @@ -1,25 +1,11 @@ /* - Copyright 2008,2011 Will Stephenson - Copyright 2010 Lamarque Souza - Copyright 2013 Daniel Nicoletti - Copyright 2013 Lukas Tinkl - Copyright 2013 Jan Grulich + SPDX-FileCopyrightText: 2008, 2011 Will Stephenson + SPDX-FileCopyrightText: 2010 Lamarque Souza + SPDX-FileCopyrightText: 2013 Daniel Nicoletti + SPDX-FileCopyrightText: 2013 Lukas Tinkl + SPDX-FileCopyrightText: 2013 Jan Grulich - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MODEMMANAGERQT_MANAGER_H diff --git a/src/manager.cpp b/src/manager.cpp --- a/src/manager.cpp +++ b/src/manager.cpp @@ -1,25 +1,11 @@ /* - Copyright 2008,2011 Will Stephenson - Copyright 2010 Lamarque Souza - Copyright 2013 Daniel Nicoletti - Copyright 2013 Lukas Tinkl - Copyright 2013-2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2008, 2011 Will Stephenson + SPDX-FileCopyrightText: 2010 Lamarque Souza + SPDX-FileCopyrightText: 2013 Daniel Nicoletti + SPDX-FileCopyrightText: 2013 Lukas Tinkl + SPDX-FileCopyrightText: 2013-2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #include "manager.h" diff --git a/src/manager_p.h b/src/manager_p.h --- a/src/manager_p.h +++ b/src/manager_p.h @@ -1,23 +1,9 @@ /* - Copyright 2008,2011 Will Stephenson - Copyright 2010 Lamarque Souza - Copyright 2013 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2008, 2011 Will Stephenson + SPDX-FileCopyrightText: 2010 Lamarque Souza + SPDX-FileCopyrightText: 2013 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MODEMMANAGERQT_MANAGER_P_H diff --git a/src/mmdebug_p.h b/src/mmdebug_p.h --- a/src/mmdebug_p.h +++ b/src/mmdebug_p.h @@ -1,21 +1,7 @@ /* - Copyright 2011-2013 Lamarque Souza + SPDX-FileCopyrightText: 2011-2013 Lamarque Souza - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MODEMMANAGERQT_MMDEBUG_H diff --git a/src/modem.h b/src/modem.h --- a/src/modem.h +++ b/src/modem.h @@ -1,25 +1,11 @@ /* - Copyright 2008,2011 Will Stephenson - Copyright 2010 Lamarque Souza - Copyright 2013 Daniel Nicoletti - Copyright 2013 Lukas Tinkl - Copyright 2013-2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2008, 2011 Will Stephenson + SPDX-FileCopyrightText: 2010 Lamarque Souza + SPDX-FileCopyrightText: 2013 Daniel Nicoletti + SPDX-FileCopyrightText: 2013 Lukas Tinkl + SPDX-FileCopyrightText: 2013-2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MODEMMANAGERQT_MODEM_H diff --git a/src/modem.cpp b/src/modem.cpp --- a/src/modem.cpp +++ b/src/modem.cpp @@ -1,25 +1,11 @@ /* - Copyright 2008,2011 Will Stephenson - Copyright 2010 Lamarque Souza - Copyright 2013 Daniel Nicoletti - Copyright 2013 Lukas Tinkl - Copyright 2013-2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2008, 2011 Will Stephenson + SPDX-FileCopyrightText: 2010 Lamarque Souza + SPDX-FileCopyrightText: 2013 Daniel Nicoletti + SPDX-FileCopyrightText: 2013 Lukas Tinkl + SPDX-FileCopyrightText: 2013-2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #include "modem.h" diff --git a/src/modem3gpp.h b/src/modem3gpp.h --- a/src/modem3gpp.h +++ b/src/modem3gpp.h @@ -1,24 +1,10 @@ /* - Copyright 2008,2011 Will Stephenson - Copyright 2010 Lamarque Souza - Copyright 2013 Lukas Tinkl - Copyright 2013-2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2008, 2011 Will Stephenson + SPDX-FileCopyrightText: 2010 Lamarque Souza + SPDX-FileCopyrightText: 2013 Lukas Tinkl + SPDX-FileCopyrightText: 2013-2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MODEMMANAGERQT_MODEM3GPP_H diff --git a/src/modem3gpp.cpp b/src/modem3gpp.cpp --- a/src/modem3gpp.cpp +++ b/src/modem3gpp.cpp @@ -1,24 +1,10 @@ /* - Copyright 2008,2011 Will Stephenson - Copyright 2010 Lamarque Souza - Copyright 2013 Lukas Tinkl - Copyright 2013-2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2008, 2011 Will Stephenson + SPDX-FileCopyrightText: 2010 Lamarque Souza + SPDX-FileCopyrightText: 2013 Lukas Tinkl + SPDX-FileCopyrightText: 2013-2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #include "modem3gpp.h" diff --git a/src/modem3gpp_p.h b/src/modem3gpp_p.h --- a/src/modem3gpp_p.h +++ b/src/modem3gpp_p.h @@ -1,23 +1,9 @@ /* - Copyright 2008 Will Stephenson - Copyright 2010 Lamarque Souza - Copyright 2013-2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2008 Will Stephenson + SPDX-FileCopyrightText: 2010 Lamarque Souza + SPDX-FileCopyrightText: 2013-2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MODEMMANAGER_MODEM3GPP_P_H diff --git a/src/modem3gppussd.h b/src/modem3gppussd.h --- a/src/modem3gppussd.h +++ b/src/modem3gppussd.h @@ -1,24 +1,10 @@ /* - Copyright 2008,2011 Will Stephenson - Copyright 2010 Lamarque Souza - Copyright 2013 Lukas Tinkl - Copyright 2013-2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2008, 2011 Will Stephenson + SPDX-FileCopyrightText: 2010 Lamarque Souza + SPDX-FileCopyrightText: 2013 Lukas Tinkl + SPDX-FileCopyrightText: 2013-2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MODEMMANAGERQT_MODEM3GPPUSSD_H diff --git a/src/modem3gppussd.cpp b/src/modem3gppussd.cpp --- a/src/modem3gppussd.cpp +++ b/src/modem3gppussd.cpp @@ -1,24 +1,10 @@ /* - Copyright 2008,2011 Will Stephenson - Copyright 2010 Lamarque Souza - Copyright 2013 Lukas Tinkl - Copyright 2013-2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2008, 2011 Will Stephenson + SPDX-FileCopyrightText: 2010 Lamarque Souza + SPDX-FileCopyrightText: 2013 Lukas Tinkl + SPDX-FileCopyrightText: 2013-2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #include "modem3gppussd.h" diff --git a/src/modem3gppussd_p.h b/src/modem3gppussd_p.h --- a/src/modem3gppussd_p.h +++ b/src/modem3gppussd_p.h @@ -1,23 +1,9 @@ /* - Copyright 2008 Will Stephenson - Copyright 2010 Lamarque Souza - Copyright 2013-2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2008 Will Stephenson + SPDX-FileCopyrightText: 2010 Lamarque Souza + SPDX-FileCopyrightText: 2013-2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MODEMMANAGERQT_MODEM3GPPUSSD_P_H diff --git a/src/modem_p.h b/src/modem_p.h --- a/src/modem_p.h +++ b/src/modem_p.h @@ -1,23 +1,9 @@ /* - Copyright 2008 Will Stephenson - Copyright 2010 Lamarque Souza - Copyright 2013-2015 Jan Grulich + SPDX-FileCopyrightText: 2008 Will Stephenson + SPDX-FileCopyrightText: 2010 Lamarque Souza + SPDX-FileCopyrightText: 2013-2015 Jan Grulich - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MODEMMANAGERQT_MODEM_P_H diff --git a/src/modemcdma.h b/src/modemcdma.h --- a/src/modemcdma.h +++ b/src/modemcdma.h @@ -1,24 +1,10 @@ /* - Copyright 2008,2011 Will Stephenson - Copyright 2010 Lamarque Souza - Copyright 2013 Lukas Tinkl - Copyright 2013-2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2008, 2011 Will Stephenson + SPDX-FileCopyrightText: 2010 Lamarque Souza + SPDX-FileCopyrightText: 2013 Lukas Tinkl + SPDX-FileCopyrightText: 2013-2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MODEMMANAGERQT_MODEMCDMA_H diff --git a/src/modemcdma.cpp b/src/modemcdma.cpp --- a/src/modemcdma.cpp +++ b/src/modemcdma.cpp @@ -1,24 +1,10 @@ /* - Copyright 2008,2011 Will Stephenson - Copyright 2010 Lamarque Souza - Copyright 2013 Lukas Tinkl - Copyright 2013-2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2008, 2011 Will Stephenson + SPDX-FileCopyrightText: 2010 Lamarque Souza + SPDX-FileCopyrightText: 2013 Lukas Tinkl + SPDX-FileCopyrightText: 2013-2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #include "modemcdma_p.h" diff --git a/src/modemcdma_p.h b/src/modemcdma_p.h --- a/src/modemcdma_p.h +++ b/src/modemcdma_p.h @@ -1,23 +1,9 @@ /* - Copyright 2008 Will Stephenson - Copyright 2010 Lamarque Souza - Copyright 2013-2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2008 Will Stephenson + SPDX-FileCopyrightText: 2010 Lamarque Souza + SPDX-FileCopyrightText: 2013-2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MODEMMANAGERQT_MODEMCDMA_P_H diff --git a/src/modemdevice.h b/src/modemdevice.h --- a/src/modemdevice.h +++ b/src/modemdevice.h @@ -1,22 +1,8 @@ /* - Copyright 2013, 2014 Lukas Tinkl - Copyright 2013-2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2013, 2014 Lukas Tinkl + SPDX-FileCopyrightText: 2013-2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MODEMMANAGERQT_MODEMDEVICE_H diff --git a/src/modemdevice.cpp b/src/modemdevice.cpp --- a/src/modemdevice.cpp +++ b/src/modemdevice.cpp @@ -1,22 +1,8 @@ /* - Copyright 2013, 2014 Lukas Tinkl - Copyright 2013-2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2013, 2014 Lukas Tinkl + SPDX-FileCopyrightText: 2013-2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #include "modemdevice.h" diff --git a/src/modemdevice_p.h b/src/modemdevice_p.h --- a/src/modemdevice_p.h +++ b/src/modemdevice_p.h @@ -1,22 +1,8 @@ /* - Copyright 2013 Lukas Tinkl - Copyright 2013-2015 Jan Grulich + SPDX-FileCopyrightText: 2013 Lukas Tinkl + SPDX-FileCopyrightText: 2013-2015 Jan Grulich - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MODEMMANAGERQT_MODEMDEVICE_P_H diff --git a/src/modemfirmware.h b/src/modemfirmware.h --- a/src/modemfirmware.h +++ b/src/modemfirmware.h @@ -1,21 +1,7 @@ /* - Copyright 2014 Lukas Tinkl + SPDX-FileCopyrightText: 2014 Lukas Tinkl - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MODEMMANAGERQT_MODEMFIRMWARE_H diff --git a/src/modemfirmware.cpp b/src/modemfirmware.cpp --- a/src/modemfirmware.cpp +++ b/src/modemfirmware.cpp @@ -1,21 +1,7 @@ /* - Copyright 2014 Lukas Tinkl + SPDX-FileCopyrightText: 2014 Lukas Tinkl - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #include "modemfirmware.h" diff --git a/src/modemfirmware_p.h b/src/modemfirmware_p.h --- a/src/modemfirmware_p.h +++ b/src/modemfirmware_p.h @@ -1,21 +1,7 @@ /* - Copyright 2014 Lukas Tinkl - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2014 Lukas Tinkl + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MODEMMANAGERQT_MODEMFIRMWARE_P_H diff --git a/src/modemlocation.h b/src/modemlocation.h --- a/src/modemlocation.h +++ b/src/modemlocation.h @@ -1,24 +1,10 @@ /* - Copyright 2008,2011 Will Stephenson - Copyright 2010 Lamarque Souza - Copyright 2013 Lukas Tinkl - Copyright 2013 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2008, 2011 Will Stephenson + SPDX-FileCopyrightText: 2010 Lamarque Souza + SPDX-FileCopyrightText: 2013 Lukas Tinkl + SPDX-FileCopyrightText: 2013 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MODEMMANAGERQT_MODEMLOCATION_H diff --git a/src/modemlocation.cpp b/src/modemlocation.cpp --- a/src/modemlocation.cpp +++ b/src/modemlocation.cpp @@ -1,24 +1,10 @@ /* - Copyright 2008 Will Stephenson - Copyright 2010 Lamarque Souza - Copyright 2013 Lukas Tinkl - Copyright 2013 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2008 Will Stephenson + SPDX-FileCopyrightText: 2010 Lamarque Souza + SPDX-FileCopyrightText: 2013 Lukas Tinkl + SPDX-FileCopyrightText: 2013 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #include "modemlocation.h" diff --git a/src/modemlocation_p.h b/src/modemlocation_p.h --- a/src/modemlocation_p.h +++ b/src/modemlocation_p.h @@ -1,23 +1,9 @@ /* - Copyright 2008 Will Stephenson - Copyright 2010 Lamarque Souza - Copyright 2013 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2008 Will Stephenson + SPDX-FileCopyrightText: 2010 Lamarque Souza + SPDX-FileCopyrightText: 2013 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MODEMMANAGERQT_MODEMLOCATION_P_H diff --git a/src/modemmessaging.h b/src/modemmessaging.h --- a/src/modemmessaging.h +++ b/src/modemmessaging.h @@ -1,23 +1,9 @@ /* - Copyright 2013 Anant Kamath - Copyright 2013 Lukas Tinkl - Copyright 2013-2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2013 Anant Kamath + SPDX-FileCopyrightText: 2013 Lukas Tinkl + SPDX-FileCopyrightText: 2013-2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MODEMMANAGERQT_MODEMMESSAGING_H diff --git a/src/modemmessaging.cpp b/src/modemmessaging.cpp --- a/src/modemmessaging.cpp +++ b/src/modemmessaging.cpp @@ -1,23 +1,9 @@ /* - Copyright 2013 Anant Kamath - Copyright 2013 Lukas Tinkl - Copyright 2013-2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2013 Anant Kamath + SPDX-FileCopyrightText: 2013 Lukas Tinkl + SPDX-FileCopyrightText: 2013-2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #include "modemmessaging.h" diff --git a/src/modemmessaging_p.h b/src/modemmessaging_p.h --- a/src/modemmessaging_p.h +++ b/src/modemmessaging_p.h @@ -1,23 +1,9 @@ /* - Copyright 2013 Anant Kamath - Copyright 2013 Lukas Tinkl - Copyright 2013-2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2013 Anant Kamath + SPDX-FileCopyrightText: 2013 Lukas Tinkl + SPDX-FileCopyrightText: 2013-2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MODEMMANAGER_MODEMMESSAGING_P_H diff --git a/src/modemoma.h b/src/modemoma.h --- a/src/modemoma.h +++ b/src/modemoma.h @@ -1,22 +1,8 @@ /* - Copyright 2014 Lukas Tinkl - Copyright 2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2014 Lukas Tinkl + SPDX-FileCopyrightText: 2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MODEMMANAGERQT_MODEMOMA_H diff --git a/src/modemoma.cpp b/src/modemoma.cpp --- a/src/modemoma.cpp +++ b/src/modemoma.cpp @@ -1,22 +1,8 @@ /* - Copyright 2014 Lukas Tinkl - Copyright 2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2014 Lukas Tinkl + SPDX-FileCopyrightText: 2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #include "modemoma.h" diff --git a/src/modemoma_p.h b/src/modemoma_p.h --- a/src/modemoma_p.h +++ b/src/modemoma_p.h @@ -1,22 +1,8 @@ /* - Copyright 2014 Lukas Tinkl - Copyright 2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2014 Lukas Tinkl + SPDX-FileCopyrightText: 2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MODEMMANAGERQT_MODEMOMA_P_H diff --git a/src/modemsignal.h b/src/modemsignal.h --- a/src/modemsignal.h +++ b/src/modemsignal.h @@ -1,22 +1,8 @@ /* - Copyright 2014 Lukas Tinkl - Copyright 2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2014 Lukas Tinkl + SPDX-FileCopyrightText: 2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MODEMMANAGERQT_MODEMSIGNAL_H diff --git a/src/modemsignal.cpp b/src/modemsignal.cpp --- a/src/modemsignal.cpp +++ b/src/modemsignal.cpp @@ -1,22 +1,8 @@ /* - Copyright 2014 Lukas Tinkl - Copyright 2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2014 Lukas Tinkl + SPDX-FileCopyrightText: 2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #include "modemsignal.h" diff --git a/src/modemsignal_p.h b/src/modemsignal_p.h --- a/src/modemsignal_p.h +++ b/src/modemsignal_p.h @@ -1,22 +1,8 @@ /* - Copyright 2014 Lukas Tinkl - Copyright 2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2014 Lukas Tinkl + SPDX-FileCopyrightText: 2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MODEMMANAGERQT_MODEMSIGNAL_P_H diff --git a/src/modemsimple.h b/src/modemsimple.h --- a/src/modemsimple.h +++ b/src/modemsimple.h @@ -1,21 +1,7 @@ /* - Copyright 2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MODEMMANAGERQT_MODEM_SIMPLE_H diff --git a/src/modemsimple.cpp b/src/modemsimple.cpp --- a/src/modemsimple.cpp +++ b/src/modemsimple.cpp @@ -1,21 +1,7 @@ /* - Copyright 2015 Jan Grulich + SPDX-FileCopyrightText: 2015 Jan Grulich - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #include "modemsimple_p.h" diff --git a/src/modemsimple_p.h b/src/modemsimple_p.h --- a/src/modemsimple_p.h +++ b/src/modemsimple_p.h @@ -1,21 +1,7 @@ /* - Copyright 2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MODEMMANAGERQT_MODEM_SIMPLE_P_H diff --git a/src/modemtime.h b/src/modemtime.h --- a/src/modemtime.h +++ b/src/modemtime.h @@ -1,22 +1,8 @@ /* - Copyright 2013 Lukas Tinkl - Copyright 2013-2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2013 Lukas Tinkl + SPDX-FileCopyrightText: 2013-2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MODEMMANAGERQT_MODEMTIME_H diff --git a/src/modemtime.cpp b/src/modemtime.cpp --- a/src/modemtime.cpp +++ b/src/modemtime.cpp @@ -1,22 +1,8 @@ /* - Copyright 2013 Lukas Tinkl - Copyright 2013-2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2013 Lukas Tinkl + SPDX-FileCopyrightText: 2013-2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #include "modemtime.h" diff --git a/src/modemtime_p.h b/src/modemtime_p.h --- a/src/modemtime_p.h +++ b/src/modemtime_p.h @@ -1,22 +1,8 @@ /* - Copyright 2013 Lukas Tinkl - Copyright 2013-2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2013 Lukas Tinkl + SPDX-FileCopyrightText: 2013-2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MODEMMANAGER_MODEMTIME_P_H diff --git a/src/modemvoice.h b/src/modemvoice.h --- a/src/modemvoice.h +++ b/src/modemvoice.h @@ -1,21 +1,7 @@ /* - Copyright 2018 Aleksander Morgado - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2018 Aleksander Morgado + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MODEMMANAGERQT_MODEMVOICE_H diff --git a/src/modemvoice.cpp b/src/modemvoice.cpp --- a/src/modemvoice.cpp +++ b/src/modemvoice.cpp @@ -1,21 +1,7 @@ /* - Copyright 2018 Aleksander Morgado - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2018 Aleksander Morgado + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #include "modemvoice.h" diff --git a/src/modemvoice_p.h b/src/modemvoice_p.h --- a/src/modemvoice_p.h +++ b/src/modemvoice_p.h @@ -1,21 +1,7 @@ /* - Copyright 2018 Aleksander Morgado - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2018 Aleksander Morgado + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MODEMMANAGER_MODEMVOICE_P_H diff --git a/src/sim.h b/src/sim.h --- a/src/sim.h +++ b/src/sim.h @@ -1,24 +1,10 @@ /* - Copyright 2008,2011 Will Stephenson - Copyright 2010-2011 Lamarque Souza - Copyright 2013 Lukas Tinkl - Copyright 2013-2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2008, 2011 Will Stephenson + SPDX-FileCopyrightText: 2010-2011 Lamarque Souza + SPDX-FileCopyrightText: 2013 Lukas Tinkl + SPDX-FileCopyrightText: 2013-2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MODEMMANAGERQT_SIM_H diff --git a/src/sim.cpp b/src/sim.cpp --- a/src/sim.cpp +++ b/src/sim.cpp @@ -1,24 +1,10 @@ /* - Copyright 2008,2011 Will Stephenson - Copyright 2010-2011 Lamarque Souza - Copyright 2013 Lukas Tinkl - Copyright 2013-2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2008, 2011 Will Stephenson + SPDX-FileCopyrightText: 2010-2011 Lamarque Souza + SPDX-FileCopyrightText: 2013 Lukas Tinkl + SPDX-FileCopyrightText: 2013-2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #include "sim.h" diff --git a/src/sim_p.h b/src/sim_p.h --- a/src/sim_p.h +++ b/src/sim_p.h @@ -1,23 +1,9 @@ /* - Copyright 2008 Will Stephenson - Copyright 2010 Lamarque Souza - Copyright 2013-2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2008 Will Stephenson + SPDX-FileCopyrightText: 2010 Lamarque Souza + SPDX-FileCopyrightText: 2013-2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MODEMMANAGER_SIM_P_H diff --git a/src/sms.h b/src/sms.h --- a/src/sms.h +++ b/src/sms.h @@ -1,23 +1,9 @@ /* - Copyright 2013 Anant Kamath - Copyright 2013 Lukas Tinkl - Copyright 2013-2015 Jan Grulich - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-FileCopyrightText: 2013 Anant Kamath + SPDX-FileCopyrightText: 2013 Lukas Tinkl + SPDX-FileCopyrightText: 2013-2015 Jan Grulich + + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MODEMMANAGERQT_SMS_H diff --git a/src/sms.cpp b/src/sms.cpp --- a/src/sms.cpp +++ b/src/sms.cpp @@ -1,23 +1,9 @@ /* - Copyright 2013 Anant Kamath - Copyright 2013 Lukas Tinkl - Copyright 2013-2015 Jan Grulich + SPDX-FileCopyrightText: 2013 Anant Kamath + SPDX-FileCopyrightText: 2013 Lukas Tinkl + SPDX-FileCopyrightText: 2013-2015 Jan Grulich - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #include "sms.h" diff --git a/src/sms_p.h b/src/sms_p.h --- a/src/sms_p.h +++ b/src/sms_p.h @@ -1,25 +1,11 @@ /* - Copyright 2008 Will Stephenson - Copyright 2010 Lamarque Souza - Copyright 2013 Anant Kamath - Copyright 2013 Lukas Tinkl - Copyright 2013-2015 Jan Grulich + SPDX-FileCopyrightText: 2008 Will Stephenson + SPDX-FileCopyrightText: 2010 Lamarque Souza + SPDX-FileCopyrightText: 2013 Anant Kamath + SPDX-FileCopyrightText: 2013 Lukas Tinkl + SPDX-FileCopyrightText: 2013-2015 Jan Grulich - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) version 3, or any - later version accepted by the membership of KDE e.V. (or its - successor approved by the membership of KDE e.V.), which shall - act as a proxy defined in Section 6 of version 3 of the license. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library. If not, see . + SPDX-License-Identifier: LGPL-2.1-only OR LGPL-3.0-only OR LicenseRef-KDE-Accepted-LGPL */ #ifndef MODEMMANAGER_SMS_P_H